CARSON Product Range
Dive into the world of Carson: Discover everything about RC models, accessories, electronics, and plastic model kits – from entry-level sets to pro-grade vehicles. Your model-building journey starts here at the Carson RC model shop!
- 20 %
RC truggies & RC monster trucks
1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR
500404292€124.99
The 1:10 Mega Duster 3.0 brings pick-up truck styling, LED lighting and a fully assembled RTR setup into a 430 mm off-road RC car built for rough ground. With independent suspension, coilover shocks and a fully suspended layout, the chassis is set up to absorb uneven surfaces while the multi-coloured printed body keeps the truck's desert-racer look clear in motion. Its 2.4 GHz radio system uses digital proportional control, so steering and throttle inputs can be fed in with fine adjustment rather than simple on-off commands. The included Li-Ion drive battery is rated at 7.4 V and 1500 mAh, and the USB charger is part of the set, along with 4 AA transmitter batteries. At 310 mm wide and 200 mm high, the truck carries a broad monster-truck footprint, while the stated weight of 1364 g supports a planted feel over gravel and dirt. Splash-proof electronics expand the running window when the surface is dusty or damp, and the stated driving time reaches up to 25 minutes. The Mega Duster 3.0 suits open ground, compacted trails and loose stone where the 115 mm all-terrain tires can work for grip and control. Age 14+ is stated for this model, and the fully assembled format gets the focus quickly onto driving lines, throttle control and off-road handling rather than workshop time. Warning! Not suitable for children under 14 years.
RC cars
1:32 Deemon X, RC buggy, 100% RTR 2WD
500404322€29.99
Compact scale and lively handling give the 1:32 Deemon X the feel of a true off-road RC buggy in a format built for quick runs at home or on small garden tracks. The 2WD layout, 2.4 GHz remote control system and selectable speed levels create a clear, responsive driving setup, while the elaborately printed body shell and switchable LED lighting keep the model visually sharp in motion. At 115 mm long, 86 mm wide and 53 mm high, the buggy fits neatly into tabletop courses, improvised obstacle lines and tighter turns where larger vehicles need more room. The 3.7 V 100 mAh LiPo drive battery supports up to 15 minutes of driving time, and recharging happens via the included USB charger. Included pylons and the jump ramp add concrete course elements for slalom sections, launch points and repeatable stunt practice rather than simple straight-line driving. The 69 g weight keeps the model nimble when changing direction, and the rubber tires give the chassis the grip needed for uneven surfaces. Short sessions on indoor floors, hallway tracks or paved garden paths suit the Deemon X especially well, whether the focus is clean cornering, quick acceleration bursts or ramp jumps. With 2 speed settings and a complete RTR package, the buggy moves easily between first RC laps and fast, compact course driving
- 53 %
Models & trailers
1:12 MB Unimog U300 THW, RC truck, 100% RTR
500907722€200.00
The Unimog line became known for compact dimensions, portal-axle capability and utility work across rough terrain, and that character carries into this 1:12 MB Unimog U300 THW RC truck. In blue THW livery, the model combines a 450 mm body length with a powerful electric motor, front LED lighting and a 2.4 GHz control system for controlled driving on paths, gravel and other uneven ground. Its 220 mm width and 260 mm height give the truck a tall, purposeful stance that suits the U300 shape, while the 2052 g weight adds substance in motion. The remote control handles steering and throttle proportionally, so small stick inputs translate into finer changes than simple on or off control. A separate horn function can be triggered from the transmitter, and motor sound control adds another layer to the driving scene. The 7.4 V 850 mAh Li-Ion drive battery is included, and the RTR setup also includes the 2.4 GHz transmitter, a USB charger and transmitter batteries. That combination suits first runs in the hobby as well as relaxed utility-style driving sessions with a scale vehicle theme. On compacted dirt, paving or loose gravel, the THW truck can be guided through tighter turns, short climbs and stop-start route changes while the illuminated front end keeps the model visually defined.
RC lorries & RC trucks
1:20 MB Arocs Goldhofer, RC truck, 100% RTR
500907307€109.99
Heavy-haul transport is a defining part of construction logistics, and the 1:20 MB Arocs Goldhofer brings that role into RC form with a 1000 mm long truck and low loader combination. The fully assembled RTR set combines remote-controlled driving with functional trailer handling, creating a model that looks at home moving machinery between workshop shelf and jobsite scene. At 155 mm wide and 185 mm high, the model carries the long, low stance of a transporter, while the 1350 g weight gives the combination a substantial feel in hand. The installed reversing light works automatically together with the tractor unit, adding a realistic response during manoeuvres without needing a separate command. Included in the set are the ready-to-run model, a 2.4 GHz RC system, 2 x 4.8 V NiMH batteries, a USB charger and 2 x AA transmitter batteries. The 30 minute driving time supports extended loading runs, repositioning moves and repeated coupling sequences. Minimum age: 8 years. The low-bed layout suits transport scenes with construction machinery or other scale loads, and the remote-controlled ramp and support add movement beyond simple forward driving. On a floor layout, workshop setup or construction-themed display, the MB Arocs Goldhofer turns loading, uncoupling and trailer positioning into the central part of the action.
RC cars
1:10 Dustor, RC car, 2.4 GHz 100% RTR
500404352€69.99
The 1:10 Dustor brings full-size RC presence to first runs and casual off-road sessions, with a 540 mm length, 300 mm width and 240 mm height that give the model a broad, planted stance on mixed surfaces. A brushed motor drives the 2WD rear-wheel-drive layout to speeds of up to 20 km/h, while the 2.4 GHz radio system reaches up to 75 m for clear control across open ground. Its fully assembled format keeps the focus on driving, and the included 7.4 V 500 mAh Li-Ion battery works with the USB charger for straightforward turnaround between sessions. At 985 g, the chassis stays light enough for responsive direction changes while still carrying the visual weight expected from a 1:10 off-road model. Front and rear impact protection support everyday running where gravel edges, kerbs and clipped markers are part of the route. The included transmitter is powered by 2 x LR06 AA batteries, so the full set is prepared for use without extra radio equipment. On asphalt, compacted paths or light terrain, the combination of suspension travel, rear-drive handling and off-road tires creates a controlled, approachable driving character. With up to 30 minutes of running time per charge, the Dustor suits park runs, open-yard driving and repeated practice laps where longer sessions matter.
RC tractors
1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer
500907705€99.99
The DEUTZ-FAHR 8280 TTV brings the look of a modern farm tractor into 1:16 scale with a matching trailer, 2.4 GHz radio control and working sound functions. Engine sound, horn and LED front lighting create a more lifelike driving scene, whether the tractor is rolling across loose soil, garden paths or a carefully arranged display setup. At 750 mm long, 180 mm wide and 234 mm high, the model has a substantial footprint that suits towing and transport play. The rigid axle supports off-road running, while the steering is tuned for precise control and a small turning radius, helping the tractor change direction cleanly and guide the trailer through tighter spaces. The officially licensed DEUTZ-FAHR styling carries the 8280 TTV identity into the bodywork, giving the model a recognisable agricultural character. The accessible battery compartment under the hood allows quick battery changes between runs. Included are the ready-to-run tractor with trailer, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR03 AAA transmitter batteries. With a weight of 1731 g and a driving time of 90 minutes, the set is equipped for extended driving sessions focused on towing, positioning and farm-style transport action.
RC buggys
1:8 Drakuro BL 3S, RC car, 4WD RTR
500409097€299.99
The 1:8 Drakuro BL 3S RTR brings brushless power, long-travel suspension and a wide 370 mm stance into one large-scale RC car built for fast off-road running. At 500 mm long, 330 mm high and 3402 g in weight, the chassis carries real presence on dirt tracks, gravel stretches and open ground, with a top speed of up to 65 km/h. A longitudinal aluminum reinforcement brace adds rigidity through the centre of the chassis, and reinforced steel drive shafts at the front and rear transfer power under load. The waterproof 30 kg steering servo uses metal gears for direct steering input, while splash-proof electronics and housing support running in changing conditions. Height-adjustable body mounts make it easier to set the shell position cleanly over the chassis, and LED lighting at the front, rear and roof keeps the model clearly defined when the light drops. The XT90 high-current connector system is designed for low-loss power transmission within the drive setup. The ready-to-run package includes a 2.4 GHz remote control and instructions, so the focus stays on driving rather than sourcing the core control gear. With 14 Years marked in the data, the Drakuro suits high-speed bashing sessions, repeated acceleration runs and broad off-road lines where suspension travel, steering force and chassis size all come into play. Warning! Not suitable for children under 14 years.
RC models in 1:87 scale
1:87 M-B 200/8, RC car, 100% RTR trailer
500504169€114.99
The Mercedes-Benz /8 series shaped everyday road traffic in the late 1960s and 1970s, and this 1:87 M-B 200/8 captures that classic saloon presence in a compact RC format. The green body and matching trailer combine a recognisable road-car silhouette with radio-controlled movement, creating a small-scale setup that carries both collector appeal and active driving use. Its 1:87 scale makes the model easy to place on a desk, shelf, or layout, while the trailer adds a second element that changes the overall scene and gives the combination a more complete towing look. The 100% RTR specification means the driving package is prepared for immediate use, and 5 included batteries cover the initial power requirement stated in the data. With a minimum age marking of 14 years, the model sits in a hobby-focused range rather than a preschool toy segment. The compact format also suits short driving sessions where a larger RC vehicle would need more floor space. Whether used for careful indoor manoeuvres, as a small addition to a model collection, or as a road-car counterpart within a miniature vehicle lineup, the M-B 200/8 with trailer brings motion into a classic passenger-car theme. The combination of saloon and trailer gives the setup a distinct identity both at rest and in operation. Warning! Not suitable for children under 14 years.
RC models in 1:87 scale
1:87 MB 1620 Tarp Truck, RC truck, 100% RTR
500504157€139.99
The 1:87 MB 1620 Tarp Truck with trailer brings moving road traffic into H0 railway scenes with compact dimensions of 187 x 28 x 38 mm and fully assembled 100% RTR equipment. Official Mercedes-Benz Trucks licensing, fine printwork and the blue finish give this RC truck a recognisable presence beside stations, freight depots and urban track sections. Its 2.4 GHz radio system supports interference-free control and allows several models to run at the same time, which suits busy diorama setups with more than one active vehicle. The very small turning radius helps the truck work through narrow streets, loading areas and switching zones where larger RC formats would look out of scale. The trailer extends the road-train silhouette and the removable tarp changes the look of the load area for different scene concepts. Included in the set are the ready-to-drive model, 2.4 GHz remote control system, Li-Ion drive battery 3.7 V / 75 mAh, 4 transmitter batteries LR03 / AAA, and instructions. On a layout, the truck can roll alongside trains, serve as a delivery vehicle near a goods shed or move through a city section with controlled speed changes and steering inputs. Collectors can also place it as a static display piece, with the integrated driver figure and licensed cab details carrying the scale effect even when the model is parked.
Mini RC cars
1:60 Nano Racer Aston Martin V12 Vantage RC car
500404338€17.99
The Aston Martin V12 Vantage brings a well-known British sports car shape into a compact 1:60 Nano Racer format with radio control and a red body that stands out clearly on small driving layouts. Its officially licensed appearance follows the full-size model closely, while the 79 mm length, 33 mm width and 22 mm height keep the car suited to short straights, table-edge turns and quick direction changes in limited space. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The controller works on 2.4 GHz and reaches up to 15 m, giving the car enough room for indoor laps and compact obstacle courses. The same control system allows up to 50 vehicles to run simultaneously, which opens the door to group sessions without frequency clashes. With a weight of 25 g, the small chassis stays easy to handle between runs, and the battery delivers up to 10 minutes of driving time per charge. On a living room floor, a desk track or a small race setup, the Nano Racer format turns narrow spaces into usable circuits. Short driving sessions, quick charging through the controller and the compact footprint make this RC car a neat choice for spontaneous races, collecting and casual practice runs.
Mini RC cars
1:60 Nano Racer Fo.Must.ShelbyGT500, RC car
500404334€17.99
The Ford Mustang Shelby GT500 has long stood for big-engine muscle car presence, and this 1:60 Nano Racer translates that character into a compact RC format. At 79 mm long, 33 mm wide and 22 mm high, the miniature car stays small enough for quick driving sessions on tables, smooth floors or improvised indoor courses while still carrying the licensed Ford look. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The 2.4 GHz radio system gives the car responsive control and allows up to 50 vehicles to run simultaneously, which suits group races without frequency clashes. A 15 m control range leaves room for short sprints, turns and head-to-head runs, while the 25 g weight keeps the handling light and agile. The remote control also serves as the charging point, so the battery can be charged directly through the controller. With up to 10 minutes driving time, the Nano Racer fits quick race breaks, compact home circuits and repeated short sessions where several cars share the same space. The small footprint and simple control layout also make it easy to set up spontaneous races whenever a smooth surface is available.
RC models in 1:87 scale
1:87 M-B Unimog U406, RC fire engine, RTR
500504178€109.99
The Mercedes-Benz Unimog U406 has long been known for compact utility and all-terrain presence, and this 1:87 RC fire engine translates that character into a format built for close-quarters driving. Fine printing, high-quality paintwork and front and rear LED lighting give the body a convincing emergency-service appearance, while the very small turning circle suits narrow routes between scenery, tools or display pieces. The chassis uses 2WD rear-wheel drive and a brushed motor for controlled running, with fully proportional steering and acceleration allowing measured inputs instead of simple on-off commands. That control layout makes a visible difference on a desk, in a diorama or anywhere space is limited, because the model can be guided through tighter lines with cleaner corrections. The 2.4 GHz system supports stable operation, and the permanently installed 3.7 V 75 mAh Li-ion drive battery keeps the compact body free from bulky battery changes. Charging takes place via the transmitter and takes around 30 minutes. As a 100% RTR version, the set arrives with the remote control, the drive battery and the batteries required for the transmitter. Up to 60 minutes of driving time supports longer indoor sessions, whether the model is weaving through a small layout, tracing service routes across a tabletop or adding movement to a scale scene.
- 31 %
RC helicopters
Eagle 280 Crash Stop, RC helicopter, 2.4G RTF
500507169€54.99
The Eagle 280 Crash Stop brings compact RC helicopter flying together with a front crash-stop sensor that reacts to obstacles by stopping and backing the model away. At 200 mm long, 280 mm wide and 125 mm high, this 56 g coaxial helicopter suits controlled flights in tighter spaces as well as calm outdoor use. The 2.4 GHz control system gives the model its dedicated radio link, while the emergency stop button on the transmitter adds a direct way to cut the action when needed. A 3.7 V 250 mAh LiPo flight battery powers flights of up to 7 minutes, and the model reaches speeds of up to 25 km/h. The aluminium chassis gives the structure a firm core, and the coaxial rotor arrangement supports balanced lift for measured handling. Spare rotor blades are included, so the set is equipped for continued running after routine contact or wear. Indoor flights near walls, hallways or furniture benefit from the forward obstacle response, while open areas allow short hovering runs, lift-offs and landings with the same compact airframe. The ready-to-fly package includes the helicopter, remote control system, USB charger and transmitter batteries, so the set is prepared for flight after the first charging process.
- 21 %
RC speed boats
RC Fire Boat 2.4G, RC boat, 100% RTR
500108051€119.99
The RC Fire Boat 2.4G 100% RTR brings firefighting action onto the water with a remotely operated water cannon, LED position lights and a sporty rescue-boat look. At 560 mm long, 147 mm wide and 215 mm high, the hull has a strong on-water presence, while the 2.4 GHz radio system keeps control stable across distances up to 100 m. The fully assembled boat is supplied as a ready-to-run set with a 7.2 V 1000 mAh NiMH drive battery, USB charger, 2.4 GHz remote control and 2 x AA transmitter batteries. Full driving functions cover forwards, backwards, left and right, so manoeuvres can be varied between straight sprints, tight turns and controlled repositioning for water-cannon play. A driving time of 45 minutes supports longer sessions before recharging, and the boat weight of 717 g keeps the format easy to handle between shore and water. Whether used on a pond, at the lakeside or on calm stretches of water, the fireboat combines radio-controlled driving with an extra action feature that changes how each run unfolds. Age 8 years+ marks the recommended age, and the included screwdriver supports the setup of the supplied components before the next launch.
Mini RC cars
1:60 Nano Racer Aston Martin V12 Vantage, RC car
500404339€17.99
The Aston Martin V12 Vantage brings British sports car character into a 1:60 Nano Racer format, combining licensed body styling with compact RC handling. At 79 mm long, 33 mm wide and 22 mm high, the black coupe keeps a low, planted look that suits short sprints across tables, smooth floors and small driving spaces. Its 2.4 GHz radio system gives the model a dependable link to the controller across 15 m, and the layout also allows up to 50 vehicles to run at the same time. That makes the small scale especially lively in group sessions, where several cars can share the same area without constant frequency conflicts. The ready-to-run setup keeps the focus on driving, while the included 1.2 V 80 mAh NiMH drive battery matches the compact chassis and the 25 g weight for quick, light movement. Charging runs directly through the remote control unit, so the car and controller work as one neat driving system. With a maximum driving time of 10 minutes, the Nano Racer suits short races, repeat laps and quick head-to-head runs. Age 4+ is stated in the product data. The included screwdriver supports battery access as part of the set contents, and the compact format makes the model easy to store between sessions.
RC speed boats
RC Yacht Hurikan, RC boat, 2.4 GHz RTR
500108059€39.99
The Hurikan brings yacht styling and fast RC handling together in a compact 350 x 95 x 105 mm format built for lively water runs. Sand tones, white surfaces and dark window graphics give the hull a sharp, modern look, while the 2.4 GHz radio system keeps steering input responsive during laps across the lake. At 270 g, the model stays light in the hand for carrying to the shoreline, yet its twin-prop drive gives the boat the thrust needed for brisk acceleration on the water. Full driving functions cover forward, backward, left and right control, making tight turns and quick corrections easy to manage. The set includes a ready-to-run model, a 2.4 GHz remote control system, a USB charger, 2 x LR06 AA transmitter batteries and 2 spare propellers. The included 3.7 V 1200 mAh Li-Ion battery powers sessions of up to 40 minutes, and the drive engages only in water through the integrated shut-off circuit. That combination suits calm-lake outings, pond sessions and repeated practice runs where clean response matters as much as speed. Age 8+ marks the recommended age, and the complete RTR setup keeps the focus on steering lines, throttle control and fast passes across open water.
RC cars
1:24 Lamborghini Sian, RC car, 2.4GHz RTR
500404332€24.99
The Lamborghini Sian brings super sports car styling into a compact 1:24 RC format, pairing a low, sharply shaped body with radio-controlled handling and a full ready-to-run setup. With a length of 195 mm, a width of 80 mm and a height of 49 mm, the model carries its proportions in a size that suits quick laps across smooth indoor surfaces. The 2.4 GHz remote control system supports stable command input during solo driving, while the 3.7 V Li-Ion drive battery with 500 mAh powers up to 60 minutes of ride time. At 172 g, the car stays light in hand and easy to place on the floor between runs. The included USB charger keeps the charging routine simple, and the set also contains 2 LR03 AAA transmitter batteries. A rear axle differential adds a mechanical detail that supports smoother cornering behaviour, while steering fine adjustment helps tune the driving line to the available space. LED lights at the front and rear keep the bodywork visible when the room gets darker and add extra presence during evening driving sessions. On a hallway course, around furniture legs or across a cleared living-room track, the compact dimensions, quick responses and detailed Lamborghini look create a focused RC session with a clear sports car character.
Mini RC cars
1:60 Nano Racer Fo.Must.Shelby GT500, RC car
500404335€17.99
The Ford Mustang Shelby GT500 has long stood for big-engine muscle-car presence, and this 1:60 Nano Racer translates that character into a compact RC format. With its licensed Ford design, red bodywork and stripe detailing, the small car brings a recognisable road-car silhouette to quick indoor driving sessions. The 2.4 GHz control system sends steering and throttle inputs over a range of 15 m, and it allows up to 50 vehicles to run simultaneously on the same frequency environment. Charging takes place through the remote control unit, which includes the charging connection for the 1.2 V 80 mAh NiMH drive battery. A full charge delivers up to 10 minutes of driving time. The ready-to-run format means the model, remote control with charging connection, NiMH drive battery, screwdriver and instructions are included. With dimensions of 79 x 33 x 22 mm and a weight of 25 g, the Nano Racer fits naturally into compact race setups where short straights, quick direction changes and close duels matter more than sheer size. The small scale also makes it easy to line up several cars for simultaneous runs, turning a table, hallway or smooth floor into a miniature racing scene with very little space required.
RC models in 1:87 scale
1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz
500504175€129.99
The Mercedes-Benz O 302 shaped coach travel across Europe for years, and this 1:87 RC bus brings that familiar silhouette into moving H0 scenes with licensed bodywork, raspberry red paintwork and front and rear LED lighting. At 112 mm long, 36 mm wide and 51 g in weight, the model sits naturally among buildings, platforms and road sections without overpowering the layout. Its 2WD rear-wheel drive works with a 2.4 GHz 3-channel radio system for controlled movement at up to 50 m, while the compact format helps the bus thread through tighter streets and station areas. The integrated 3.7 V Li-Ion battery with 75 mAh is built into the model, keeping the setup clean and the proportions true to scale. As a 100% RTR version, the set includes the remote control, the lithium drive battery, 4x AAA batteries, instructions and a storage case. The licensed Mercedes-Benz O 302 DB format gives the bus a recognisable road-going character that suits realistic transport scenes. On a model railway layout, the bus can roll between station forecourts, depot roads and town routes, adding controlled movement where static vehicles would otherwise remain fixed. The compact H0 scale format also suits shelf presentation between driving sessions, with the lighting and paintwork carrying the look of a classic DB bus into close-up display settings.
RC aircraft
Easy Skydreamer, RC aircraft, 2.4 GHz RTF
500505035€29.99
The Easy Skydreamer brings a compact flying-wing layout, twin propellers and 2.4 GHz control into a light RC aircraft that is built for straightforward handling in open-air flying sessions. At 240 mm long, 240 mm wide and just 20 g in weight, the airframe combines a small footprint with a notably light feel that suits quick launches and controlled passes. Its 6-axis gyroscope works continuously in the background to steady the model in flight, giving steering inputs a calmer, more predictable response than an unstabilised layout. The Flexipor airframe adds another concrete advantage: the material keeps the structure light while coping well with the bumps that can come with early practice flights. Twin rear-mounted propellers support the aircraft's powered flight concept, and the included 3.7 V 150 mAh LiPo flight battery supplies up to 15 minutes of runtime per charge. The set is configured as 100% Ready to Run, so the core flying hardware is already matched for use. Included in the set are the flight-ready model, the remote control, the LiPo flight battery, a USB charger, 2 x LR06 transmitter batteries and 2 spare propellers. With its stabilised control concept and low 20 g weight, the Easy Skydreamer suits park flights, first RC take-offs and short practice sessions focused on smooth turns, level passes and repeatable landings.
RC helicopters
Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF
500507132€29.99
The Easy Tyrann 200 Boost IR brings compact indoor helicopter flying into a 100% RTF format with a 240 mm body, 200 mm rotor diameter and a 3-channel infrared control system. Its gyro-supported flight stabiliser helps keep the model composed in the air, while the switchable boost function adds an extra burst of power when the pace needs to change. A 3.7 V LiPo flight battery with 250 mAh capacity powers flight times of up to 9 minutes, and charging runs through the included USB charger. The transmitter also controls the color changing LED, so the light effect can be switched during flight rather than staying fixed. With a top speed of 15 km/h and a flight weight of 31 g, the helicopter stays light enough for controlled indoor use while still delivering lively movement. The ready-to-fly set includes the model, IR remote control system, LiPo flight battery, USB charger, 3x LR06/AAA transmitter batteries and spare rotor blades. Short hovering runs in a living room, careful turns along a hallway or repeated take-offs and landings on a smooth floor all suit the compact format. Age 8 Years+
RC speed boats
Sea Ray 2.4 GHz, RC boat, 100% RTR
500108063€54.99
The Sea Ray 2.4 GHz brings twin 380 brushed motors, a streamlined hull and RTR convenience together in a compact RC boat built for fast action on the water. At 395 mm long, 190 mm wide and 100 mm high, it cuts a neat profile across ponds and calm lakes, with LED lighting adding a clear visual accent as the hull moves through changing light. The fully assembled format keeps the focus on driving rather than setup, and the included 7.4 V 600 mAh Li-Ion battery supports up to 20 minutes of running time per charge. A charging time of 3 hours keeps the routine straightforward between sessions. The 2.4 GHz radio system is designed for 1 player control, while the water-protected receiver and battery box help keep key electronics covered from spray. A built-in shut-off means the motors only run in water, matching the boat's intended use with a clear functional safeguard. Its lightweight 349 g build makes carrying the model from bag to bank easy, and the compact shape sits comfortably in hand at launch and recovery. With 2 AA transmitter batteries included, the set is ready for immediate use in suitable water conditions, whether the plan is short speed runs, repeated passes along the shoreline or relaxed practice with steering and throttle control.
- 50 %
Models & trailers
1:12 MB Unimog U300, RC truck, 100% RTR
500907721€199.99
The MB Unimog U300 has long been known as a compact utility truck with strong off-road credentials, and this 1:12 RC version carries that working character into a fire brigade layout with covered rear bed, roof beacons and front LED lighting. At 450 mm long, 220 mm wide and 260 mm high, the model brings a substantial road presence while staying manageable for regular driving sessions. The fully assembled chassis is ready to run with a powerful electric motor, digital proportional control and a 2.4 GHz remote control unit. Steering and throttle inputs can be adjusted progressively, which gives the truck a more controlled feel than simple on or off commands when lining up turns or easing over rougher ground. The included 7.4 V 850 mAh Li-Ion drive battery supplies up to 60 minutes of driving time, and a USB charger is part of the set. Horn and motor sound can be triggered from the transmitter, adding another layer of interaction during runs. With a vehicle weight of 2052 g, the model has enough substance to suit its utility-truck character. Fire brigade markings, the covered cargo area and the upright Unimog proportions make this RC truck fit naturally into rescue-themed driving scenes, yard layouts or obstacle courses with gravel, paving and mixed surfaces. The included transmitter batteries complete the 100% RTR setup, so the model can head straight into its first run after charging.
Mini RC cars
1:50 Nano City Dump Truck, RC truck, 2.4 GHz
500907684€18.99
Construction trucks have long shaped city streets and building sites with their compact strength and unmistakable working profile. The 1:50 Nano City Dump Truck brings that familiar form into a small RC format with a true-to-original design, a detailed driver's cab and a ready-to-run setup for immediate use. Its fully assembled layout keeps the focus on driving, while the 146 g weight and 135 mm length create a handy format for controlled manoeuvres on tables, floors or improvised indoor routes. The open dump body gives the model its recognisable utility-truck silhouette, and the non-slip rubber tires provide the grip needed for cleaner starts, tighter turns and steadier movement on smooth surfaces. The 2-channel 2.4 GHz radio system supports interference-free control, which is especially useful when several radio-controlled models are active nearby. LED lighting adds another working-vehicle detail and makes the truck easier to track when the route runs through dimmer corners. Included in the set are the ready-to-run model, a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery, a USB charger and instructions. With up to 40 minutes of travel time, the compact dump truck suits quick driving sessions, small construction-themed layouts and repeated laps through indoor obstacle courses.
RC models in 1:87 scale
1:87 M-B Unimog U406, RC truck, 100% RTR
500504177€114.99
The Mercedes-Benz Unimog U406 has long stood for compact utility vehicle engineering, and this 1:87 RC version carries that character into a small-format driving model with a matching trailer. In bright orange with detailed paintwork and precise printing, the Unimog combines a true-to-original look with compact radio-control technology for controlled runs across a desk layout, a diorama road or a small indoor course. The 2.4 GHz remote control is part of the 100% RTR setup, so the model arrives with the core driving equipment already matched to the vehicle. Front and rear LEDs work alongside the switchable warning light to sharpen the service-vehicle appearance during operation. Steering trim on the transmitter helps fine-tune straight running, which is especially useful at 1:87 scale where small corrections show clearly. The permanently installed Li-Ion battery is rated at 3.7 V and 75 mAh, and the set also includes the required transmitter batteries plus a storage case for transport and tidy shelf keeping. The trailer broadens the operating scene beyond simple laps, with a tilting bed and removable tarpaulin that suit loading and unloading setups in miniature worksite or farm-style layouts. With age recommendation 14 years and up, the model fits hobby sessions focused on compact manoeuvres, display layouts and detailed vehicle handling in limited space.
- 25 %
RC models in 1:87 scale
1:87 VW T1 SambaBus, RC car, 2.4GHz RTR
500504164€119.99
The VW T1 SambaBus with trailer brings classic touring style into compact RC form at 1:87 scale. The ready-assembled set pairs the iconic bus silhouette with a matching caravan, while front and rear LED lights add visible presence during each run. A 2.4 GHz remote control system handles the model with fully proportional inputs, so throttle and steering respond in fine steps rather than simple on or off commands. Steering trim helps keep the vehicle tracking cleanly, especially on narrow routes and detailed miniature layouts. The 3.7 V 75 mAh Li-Ion drive battery supplies the power, and the transmitter also serves as the charging connection with a 60 minute charge time. The compact format and very small turning radius suit controlled driving in limited space where broader models would need more room. The combination of SambaBus and caravan creates a distinctive road-trip scene for shelf display, diorama use or active driving sessions. Included in the set are the ready-to-run model, the 2.4 GHz remote control system, the Li-Ion drive battery and 4 AAA transmitter batteries, so the model is equipped for use straight from the set. Warning! Not suitable for children under 14 years.
RC yachts
Bella Luisa 2.4G, RC boat, 100% RTR
500108055€69.99
Classic runabout styling meets radio-controlled action in the Bella Luisa 2.4G 100% RTR. The 455 mm motorboat combines a glossy wood-look finish, a clear curved windshield and chrome-look deck details with full steering control, creating a striking presence on ponds and small lakes. The hull measures 455 x 105 x 140 mm and weighs 648 g, giving the boat a slim, low profile on the water. Inside the set are a 2.4 GHz transmitter, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA transmitter batteries, so the model is fully assembled and ready for operation. The propeller drive reaches up to 10 km/h, while the water-activated motor start means the propeller engages only when the boat is on the surface. The detailed fairing and driver's cabin shape add to the leisure-boat look, and the cockpit area offers space for a play figure. On a calm garden pond, the responsive left-right and forward-reverse controls support neat manoeuvres along the bank or broad passes across open water. A driving time of up to 25 minutes leaves room for longer sessions before the battery returns to the USB charger.
RC truggies & RC monster trucks
1:10 Bokusa BL 2S 4WD RTR, RC car, yellow
500404321€219.99
The 1:10 Bokusa BL 2S 4WD RTR brings brushless power and monster truck stance into a ready-to-run RC car built for fast off-road sessions. Its 455 x 312 x 180 mm format and 2165 g weight give the chassis a planted footprint, while the yellow body adds a bold trackside look. A 30 kg waterproof steering servo with metal gears handles steering input with firm control, and the fully ball bearing mounted transmission supports efficient running across the drivetrain. Metal differentials at the front and rear use steel bevel gears, adding a solid mechanical base for repeated acceleration and braking. The 2.4 GHz remote control system is included, and the radio system is water-protected for running in changing ground conditions. An XT90 high-voltage battery connector system and a quick-change battery mount keep battery swaps straightforward between sessions. With a stated runtime of up to 15 minutes, the model suits short, fast runs on dirt, gravel and uneven surfaces where suspension travel and tyre grip can be used fully. Age 14 Years. A battery is required separately. Warning! Not suitable for children under 14 years.
RC truggies & RC monster trucks
1:10 XS Tekuro, RC car, 100% RTR 4WD
500404361€199.99
The 1:10 XS Tekuro brings a fast off-road setup into a ready-to-run format, combining permanent 4WD, a high-torque 550 brushed motor and up to 40 km/h for lively runs across dirt, gravel and rough ground. At 410 mm long, 300 mm wide and 175 mm high, the chassis carries a broad monster-truck stance that suits uneven terrain and quick direction changes. Completely mounted on ball bearings, the drivetrain is built to reduce drag through the transmission, while metal differentials at the front and rear use steel bevel gears for direct power transfer under load. The XT60 high-voltage battery plug-in system supports a secure connection for the included 7.4 V 2600 mAh Li-Ion battery pack, and the quick-change battery holder keeps swaps straightforward between sessions. Weight comes in at 1741 g, giving the chassis enough mass to stay settled as the suspension works through bumps. The rear bumper integrates a wheelie bar that supports controlled lift when the motor loads up hard from a standing start. The scope of delivery includes the 100% RTR model, 2.4 GHz remote control system, 2600 mAh 7.4 V drive battery, 1 A USB charger, 4 LR06 AA transmitter batteries and a manual. Driving time is about 15 minutes, making the XS Tekuro a strong fit for park runs, compact off-road tracks and loose-surface sessions where quick setup and solid traction matter. Warning! Not suitable for children under 14 years.
RC cars
1:12 Glow Rider, RC buggy, 2.4 GHz RTR
500404299€54.99
The Glow Rider brings 1:12 RC buggy action together with vivid LED lighting, creating a strong visual presence when the track gets darker and the body starts to glow in motion. At 340 x 215 x 123 mm and 570 g, the model combines a compact footprint with a planted off-road stance that suits quick direction changes and fast evening runs. The 2.4 GHz control system supports multiplayer driving without the close-range interference common to older frequency setups, which helps keep each buggy responsive during shared sessions. Full suspension works beneath the low body shell to absorb uneven ground and keep steering inputs more consistent over rougher surfaces. Grippy off-road tyres add traction where loose dirt, gravel or short grass would unsettle a road-focused setup. The ready-to-run package includes the assembled model, a Li-Ion drive battery, a USB charger and 2 AA transmitter batteries, so the full driving setup is in the box from the start. Age recommendation: 8 years and up. A paved yard at dusk, a compact dirt section in the park or a smooth evening track all suit the Glow Rider well, especially when the illuminated body can stand out against lower light. Up to 25 minutes of driving time at full capacity gives each session enough length for repeated laps, quick races and steady practice with throttle and steering control.
RC cars
1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR
500404351€54.99
The Lamborghini Murcielago SV translates the dramatic lines of the full-sized supercar into a 1:14 RC model with compact road presence and strong visual detail. At 330 mm long, 145 mm wide and 80 mm high, the body carries opening doors and a lifting hood that add hands-on interaction beyond pure driving. The detailed interior gives the cabin more depth when the body is viewed up close, while the front and rear LED system keeps the silhouette readable in lower light. A differential gear manages the drive effect between the wheels during turns, which helps the model hold a cleaner line through changing corners. Fully sprung suspension adds another mechanical layer, allowing the chassis to settle more evenly as the surface changes. The model weighs 631 g, giving it a planted feel in motion without losing the agile character expected from this scale. The fully assembled 100% RTR format keeps the focus on driving rather than setup, with a 2.4 GHz remote control unit included in the set. Also included are the 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR06 batteries. Driving time reaches up to 25 minutes, making the model well suited to repeated laps, short handling sessions and display breaks between runs.
RC tractors
1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor
500907704€84.99
The DEUTZ-FAHR 8280 TTV is recreated here as a 1:16 RC tractor with a detailed body, realistic driving functions and a strong farm vehicle presence. At 400 mm long, 180 mm wide and 234 mm high, the model carries the proportions of the original into a format that suits both active driving and shelf display. The ready-to-run set includes the tractor, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 transmitter batteries. Engine sound and horn add direct control inputs beyond steering and throttle, giving each run a more lifelike operating feel. The licensed DEUTZ-FAHR design is supported by cab details, body shaping and the characteristic tractor layout. With 5 frequency channels, the radio system provides stable control for solo driving sessions. Driving time reaches up to 90 minutes, allowing longer runs before recharging. On the floor at home, along a garden path or across lightly uneven ground, the compact dimensions and rigid axle help the tractor stay composed as it changes direction and tracks through tighter sections. Age 8 years+ marks the recommended age for use.
RC diggers
1:16 Volvo EC 160E, RC excavator, 100% RTR
500907694€199.99
The Volvo EC 160E brings excavator handling into 1:16 scale with a ready-to-run RC setup, a true-to-original driver's cab and a working crawler layout built around 2 separately driven chains. With an operating weight of 2354 g and dimensions of 252 x 168 x 180 mm, the model carries a substantial presence while remaining manageable for controlled indoor driving and digging sessions. Its function package focuses on coordinated arm work rather than simple forward travel. The lifting arm and stick are made of plastic, and the spindle drive system moves the lifting arm, stick and bucket through deliberate, mechanical action that suits loading, lifting and placement tasks. The 2.4 GHz radio system supports single-user control, and the maximum operating time of up to 190 minutes allows longer work cycles before recharging. The included sheet metal shovel, scrap grab and excavator chisel shift the machine from earthmoving to gripping and breaking scenarios without changing the core vehicle. On a floor-based building site layout, the excavator can turn the uppercarriage through 360° to pick up, swing and place material within a compact work zone. The RTR package includes the model, remote control system, 7.4 V 1200 mAh Li-Ion drive battery, 3 LR06/AA transmitter batteries and instructions. Warning! Not suitable for children under 14 years.
RC buggys
1:8 Drakuro BL 3S 4WD RTR, RC car
500409096€299.99
The 1:8 Drakuro BL 3S 4WD RTR brings brushless power, long-travel suspension, and a wide off-road stance into a ready-to-run RC car built for fast runs across mixed terrain. With a length of 500 mm, width of 370 mm, height of 330 mm, and weight of 3402 g, the chassis carries the planted footprint needed for high-speed driving and rough-surface control. A waterproof 30 kg steering servo with metal gears gives the front axle the force needed for direct steering inputs, while splash-proof electronics and housing support running where dust, spray, and loose dirt are part of the session. Steel differentials at the front and rear distribute drive through the drivetrain, and height-adjustable body mounts allow the shell position to be matched to the setup. The XT90 high-current connector system is designed for low-loss power transmission, supporting the demands of the brushless drive package under load. LED lighting at the front, rear, and roof keeps the body easy to track as conditions darken, and the rear bumper integrates a wheelie bar for hard launches under strong acceleration. The ready-to-run set includes a 2.4 GHz remote control and instructions. 14 Years marks the recommended age. Warning! Not suitable for children under 14 years.
- 24 %
RC models in 1:87 scale
1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR
500504147€104.99
Few cars carry the visual identity of the Volkswagen Beetle as clearly as this 1:87 RC version in red. The rounded body shape, detailed paintwork and decoration, and illuminated front and rear LED lights bring the classic silhouette into motion on a compact scale. The ready-to-run set includes the assembled model, a 2.4 GHz remote control system, a 3.7 V 40 mAh Li-Ion drive battery and 4 AAA transmitter batteries. Fully proportional control allows measured throttle and steering inputs instead of simple on-off commands, which gives the small chassis a more precise feel in confined spaces. Steering trim on the transmitter supports straight tracking when fine corrections are needed. The transmitter also handles charging, with a 45-minute quick-charge time matched by a driving time of up to 45 minutes. A storage showcase is included for keeping the model protected between runs. With its very small turning radius, the miniature Beetle suits short indoor routes, desk-side driving and detailed diorama settings where tighter corners matter. The 1:87 scale also makes it a strong fit for collectors and model-layout enthusiasts who want a drivable classic car with compact dimensions and a finished RTR setup.
RC models in 1:87 scale
1:87 VW T1 Pritsche, RC car, green trailer
500504179€104.99
The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 RC version captures that familiar silhouette in a compact format with a green car trailer behind it. The radio-controlled layout turns the classic VW T1 Pritsche into a moving scale model that combines display character with active handling on a small footprint. Its 1:87 scale makes the model easy to place on layouts, shelves, or desks where larger vehicles would need far more room, while the trailer adds a second visual element that extends the transporter theme beyond the cab itself. The green finish gives the combination a clear, period-inspired presence, and the Pritsche body style keeps the utility look of the original vehicle at the centre of the design. As a powered ground vehicle, it brings motion to a format often chosen for static collecting, which changes how the model can be used between display moments and controlled runs. 5 batteries are included. The age marking is 14 Years. The compact dimensions implied by 1:87 scale suit short driving sessions on smooth indoor surfaces, model layouts, or table-based scenes where precise movement matters more than outright speed. It also fits neatly into collections built around classic transport themes, especially where a trailer combination adds extra visual interest without taking over the whole scene.
RC quadcopters
Cyber Drone Polizei, quadcopter, 2.4G RTF
500507186€34.99
The Cyber Drone Polizei 2.4G 100% RTF brings compact quadcopter flying into a ready-to-fly format with a 2.4 GHz remote control, a 3.7 V 600 mAh LiPo battery and a USB charger. With a length of 125 mm, a width of 135 mm, a diameter of 150 mm and a rotor diameter of 45 mm, the layout stays light at 50 g ascent weight and suits quick take-offs in smaller open spaces. Its control setup combines several functions that shape how the model behaves in the air. The 8 minute flight time supports short, focused rounds, while the included transmitter power uses 3 AAA batteries. The headless mode changes orientation handling by referencing the control direction rather than the nose position, which helps keep steering inputs easier to read during turns. Trim adjustment for left and right flight allows finer correction when the quadcopter drifts off line. Blue and red flashing LEDs remain easy to spot once the model lifts away from the launch point. Ready-to-fly equipment keeps the set focused on getting airborne with minimal preparation, whether the session starts on a driveway, in a yard or across a calm section of park ground. The compact dimensions, return function and selectable speed levels make it easy to alternate between steady hovering, directional practice and quick stunt passes in the same outing.
RC cars
Magic Machine 2.0, RC car, 2.4 GHz RTR
500404325€49.99
The Magic Machine 2.0 brings a striking twist to RC driving with a body that changes function at the touch of a button. In one moment it runs as a flat racer, and in the next it shifts into an off-road configuration with more ground clearance, creating a fast change of character on asphalt, ramps and rougher sections. Its layout combines separately steered front and rear units with all-wheel drive, so both axles work together as the vehicle changes direction. That unusual steering concept gives the model its own driving feel and supports quick reactions when obstacles appear in the path. The body design also allows the machine to flip backward over obstacles, continue driving on its back and right itself again to keep moving. LED lighting adds another visible detail during use, while the contrasting top and bottom styling makes each rollover part of the visual effect rather than a stop in the action. With a length of 340 mm, a width of 215 mm and a height of 123 mm, the model has a compact footprint matched by a weight of 570 g. The included Li-Ion drive battery delivers up to 25 minutes of driving time and is paired with a USB charger. A 2.4 GHz remote control in a game controller style is included, along with 2 AA transmitter batteries, so the ready-to-run set is equipped for immediate use after charging.
RC aircraft
Stinger 2.0 2.4GHz 100% RTF, RC airplane
500505038€49.99
The Stinger 2.0 2.4GHz 100% RTF brings a light 29 g airframe, intelligent gyro electronics and a ready-to-fly setup into one compact RC airplane built for controlled first flights and relaxed repeat sessions. With a length of 315 mm and a width of 385 mm, the model carries a broad wing layout that gives the aircraft a clear presence in the air while keeping the format easy to transport to open flying spaces. The Flexipor construction keeps weight low and supports the light handling that suits this class, while the 2.4 GHz control system allows clean command input without cable setup. A 3.7 V 300 mAh LiPo battery powers the airplane, and charging runs through the included USB charger. Spare rotor blades are included for continued use after routine wear, and the included 2x AA batteries complete the transmitter power supply. The gyro system works with the control inputs to calm the model in flight, which helps maintain a steadier line during climbs, gentle turns and landing approaches. Open ground, a sports field or another suitable flying area gives the 385 mm wingspan room to work through smooth passes and repeated take-offs. The ready-to-fly format keeps preparation focused on charging, switching on and heading into the next 20-minute flying session.
RC truggies & RC monster trucks
1:10 Bokusa BL 2S, RC car, 4WD RTR
500404320€219.99
The 1:10 Bokusa BL 2S brings brushless power, 4WD traction and RTR convenience into a 455 mm off-road machine built for fast, dirt-focused running. With a width of 312 mm, a height of 180 mm and a weight of 2165 g, the chassis carries a broad, planted stance that suits rough ground and quick direction changes. Metal differentials at the front and rear use steel bevel gears to distribute drive across the axle line, while the fully ball bearing mounted transmission supports efficient running through the drivetrain. A 30 kg waterproof steering servo with metal gears gives the front end firm steering authority in wet or dusty conditions, and the water-protected 2.4 GHz remote control system keeps control input stable during outdoor sessions. The XT90 high-voltage battery connector system is paired with a quick-change battery mount, so battery swaps stay straightforward between runs. Age recommendation: 14 years and over. As an RTR model, the Bokusa BL 2S is set up for immediate driving once the required power source is added. Gravel tracks, compacted dirt and uneven open ground suit the suspension layout and tyre format especially well, while repeated acceleration runs benefit from the wheelie bar at the rear. Batteries are required separately. Warning! Not suitable for children under 14 years.
RC truggies & RC monster trucks
1:10 XS Ryken, RC buggy, 100% RTR 4WD
500404363€199.99
The 1:10 XS Ryken brings fast off-road running into a compact RTR format, pairing a 550 brushed motor with permanent 4WD for direct launches and steady pull across mixed terrain. At 410 x 300 x 175 mm and 1741 g, the buggy carries a broad, planted stance that suits dirt tracks, gravel paths and uneven ground. Power reaches the wheels through hardened steel drive shafts and a central steel cardan shaft, while front and rear metal differentials with sealed steel bevel gears keep the drivetrain precise under load. A chassis mounted on ball bearings supports efficient running, and the splashproof housing and electronics keep light rain and wet ground from stopping the session. The rear wheelie function uses targeted torque and traction control to lift the front end under acceleration, adding a distinct driving character beyond straight-line speed. A rear spoiler and rollover cage complete the body with added protection for the shell and electronics during tip-overs. The 100% RTR setup arrives pre-assembled with a 2.4 GHz remote control system, a 7.4 V 2600 mAh drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. That makes the XS Ryken ready for immediate running on open ground, from compact backyard courses to rougher off-road stretches where grip, suspension travel and drivetrain control all come into play. Warning! Not suitable for children under 14 years.
RC truggies & RC monster trucks
1:10 XS Ryken, RC car, 100% RTR 4WD blue
500404362€199.99
The 1:10 XS Ryken brings off-road action into a 410 mm long RC car with a wide 300 mm stance, 175 mm height and a ready-to-run setup built for immediate driving. Its blue body sits over a layout tuned for rough ground, where the combination of 4WD and generous clearance gives the chassis the grip needed for loose tracks, uneven paths and dusty sections. Power comes from a 550 brushed motor paired with a 7.4 V 2600 mAh Li-Ion drive battery, delivering up to 40 km/h and around 12 minutes of driving time. The hardened steel drive shafts transfer power with minimal play, while the sealed steel differential gears support clean, direct drivetrain response when dirt and vibration build up. The integrated wheelie function adds a distinct handling character by managing torque and traction so the front end can rise under acceleration. Oil-damped suspension helps the car settle after bumps and keeps the tyres working across broken surfaces. As a 100% RTR model, the set includes the ready-to-run vehicle, a 2.4 GHz remote control system, the drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. With a weight of 1741 g, the chassis carries enough presence for stable running on open ground, gravel stretches and wet outdoor surfaces where splashproof electronics matter. Warning! Not suitable for children under 14 years.
RC models in 1:87 scale
1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR
500504148€114.99
The Volkswagen Beetle became one of the most recognisable car shapes of the 20th century, and this 1:87 RC version pairs that silhouette with a matching trailer for a compact driving set with strong period character. Detailed paintwork and decoration, front and rear LED lights, and the rounded body lines give the miniature a clear display presence even when parked between runs. Its 2.4 GHz radio system uses fully proportional control, so steering and throttle inputs can be adjusted smoothly instead of switching only between stop and full power. Steering trim helps fine-tune straight running, and the very small turning radius suits narrow routes on desks, shelves or indoor floors where larger RC models need more space. The included 3.7 V 40 mAh Li-Ion drive battery keeps the format compact, and the transmitter handles charging in 45 minutes. A storage showcase is included for presentation between driving sessions, and the set is marked 14+. The trailer adds a second moving element to the setup, changing the handling feel as the Beetle pulls a compact load through bends and turnarounds. Short evening runs, shelf display, or a small tabletop course all suit the 1:87 format, with the illuminated front and rear sections staying easy to spot as the model moves through tighter spaces. Warning! Not suitable for children under 14 years.
RC quadcopters
Cyber Drone IR RTF, quadcopter, 360° flips
500507188€25.99
The Cyber Drone IR RTF brings compact quadcopter flying into a nimble 125 mm x 135 mm format with a 150 mm diameter and a 45 mm rotor diameter. A button-triggered 360° flip function adds fast aerial action, while the Coming Home function returns the quadcopter to its home point at the touch of a button, creating a clear, easy rhythm between short flights and recovery. Its 3.7 V/600 mAh LiPo flight battery supports up to 8 minutes of flight time, and the 50 g ascent weight keeps the model light in the air. The IR control concept is paired with 3 speed settings, so the handling can stay measured for early practice or become more lively for tighter reactions. Blue LED lighting adds clear visual orientation once the quadcopter lifts off, especially when the frame is moving quickly through flips, turns and short climbs. The green finish gives the model a bright, high-contrast look in motion. Short sessions in the living room, open indoor areas or calm practice runs with repeated take-offs and landings all suit this ready-to-fly setup. Included contents are the ready-to-fly model, IR remote control, LiPo flight battery 3.7 V/600 mAh, USB charger and instruction manual.
Model car kit
Italeri B.M.W. 320 Gr. 5 Model Kit 1:24
510003626€36.99
The Italeri B.M.W. 320 Gr. 5 model kit in 1:24 scale brings a landmark touring car racer onto the workbench with the broad-shouldered Group 5 silhouette, race number 57 and the vivid 1978 DRM Norisring livery. As the build takes shape, the E21-based body, large fenders and rear wing give the car its unmistakable circuit stance. This assembly kit draws on the competition version developed after the FIA introduced the Group 5 rules in 1976 for special production cars. The real car used a new aerodynamic profile and a 300 hp engine, and that racing character carries through the model's proportions and surface details. Separate parts on black sprues form the chassis tub, suspension elements, cockpit fittings and exterior sections, so the structure develops in clear stages. The decal sheet goes beyond body graphics with driver identification, instrument faces and mechanical markings that sharpen the finished presentation. Assembly is required, with a stated build time of 600 minutes. On a hobby desk, the 1:24 scale supports careful painting, decal placement and final body fitment without crowding fine details. Once completed, the B.M.W. 320 Gr. 5 suits shelf display, diorama use or a line-up with other classic circuit racers from the same era.
RC speed boats
RC Boot Rescue 2.4G, RC boat, ready to run
500108058€39.99
The RC Boot Rescue 2.4G brings rescue-boat styling and quick radio-controlled handling together in a compact 350 mm format. The red and yellow hull, raised cabin and roof light details create a clear emergency-service look on the water, while the 2.4 GHz control system keeps commands responsive during fast passes and tighter steering inputs. At 95 mm wide and 105 mm high, the boat combines a slim profile with a stable stance for controlled manoeuvres. Forward, backward, left and right control allows precise handling around pool edges, small obstacles and turning points. The fully assembled model comes as a ready-to-run set with remote control, a 3.7 V 1200 mAh Li-Ion battery, a USB charger and 2 x LR06 AA transmitter batteries. With a weight of 270 g, the hull stays easy to carry to the water and simple to set down for the next run. The water-activated circuit keeps the drive inactive on land and switches operation on only in water. Up to 40 minutes of running time supports longer sessions at the pond or in a larger pool, and the 2 spare propellers add a practical replacement set for regular use. Age recommendation: 8 years+
RC cars
1:10 Cage Fighter, RC buggy, 2.4GHz RTR
500404302€74.99
The 1:10 Cage Fighter brings desert buggy styling, radio-controlled handling and ready-to-run convenience into one fast-moving off-road setup. As a fully assembled RC buggy with 2.4 GHz control, it heads straight into dirt tracks, packed gravel and open ground with a low barrier to entry and a focused motorsport feel. Its full suspension supports precise steering response when the surface turns uneven, while the grippy off-road tyres help the buggy hold traction across changing terrain. Solid bumpers at the front and rear add protection in the zones that take the hardest knocks during close running. At 436 mm long, 234 mm wide and 147 mm high, the chassis has a planted footprint that suits outdoor driving, and the 806 g weight keeps the model agile in direction changes. The included Li-Ion drive battery runs at 7.4 V with 500 mAh capacity, and the set also includes a USB charger, a 2.4 GHz remote control and 2 x LR06/AA transmitter batteries. Top speeds of up to 18 km/h add a brisk pace without pushing the model beyond approachable control. Whether the route runs over compacted soil, short grass or rougher backyard ground, the Cage Fighter is built for active RC sessions rather than shelf display. Age 8+ marks the recommended age, and the 100% RTR format keeps the focus on charging the battery, taking the controller in hand and getting the buggy moving.
RC cars
1:10 Cage Fighter, RC buggy, 2.4GHz RTR
500404303€74.99
The 1:10 Cage Fighter brings fast off-road RC action into a ready-to-run format with a fully assembled chassis, 2.4 GHz radio control and a 7.4 V 500 mAh Li-Ion drive battery. At 436 mm long, 234 mm wide and 147 mm high, the buggy cuts a planted stance as it charges over dirt, gravel and uneven ground. Its full suspension helps the wheels stay in contact with the surface, so steering inputs translate into cleaner direction changes instead of skittish bouncing. The 806 g vehicle weight supports an agile feel without losing presence on the track. Front and rear bumpers frame the chassis with added protection in the zones that meet obstacles first, which suits repeated running in tighter spaces and rougher outdoor sections. The included USB charger keeps the battery routine straightforward, and the supplied 2 x LR06 AA transmitter batteries complete the set. With a driving time of 25 minutes and speeds of up to 19 km/h, the Cage Fighter suits short backyard sessions, improvised dirt courses and casual head-to-head runs with other 2.4 GHz models. Age 8+ is stated for this RC buggy, making it a strong entry point into radio-controlled driving while still offering enough pace and control to stay engaging beyond the first outings.
- 33 %
RC cars
1:10 Night Racer 2.0, RC car, 2.4GHz RTR
500404249€74.99
The Night Racer 2.0 brings low-slung on-road styling and ready-to-run RC action into one focused 1:10 setup, with a 2.4 GHz control system and a top speed of 20 km/h shaping fast laps on smooth ground. At 485 mm long, 200 mm wide and 125 mm high, the body cuts a sharp racing silhouette that stands out in motion and under evening light. A 260 mm wheelbase and a weight of 737 g give the chassis a balanced footprint for quick steering inputs and stable tracking through linked corners. The differential transmission helps the driven axle work cleanly when the car changes direction, while the suspension layout keeps the wheels in contact over uneven patches and transitions. The included 7.4 V 1200 mAh Li-Ion drive battery supports up to 40 minutes of driving time, and the USB charger keeps the running gear simple to prepare between sessions. Detailed paintwork adds a finished motorsport look, and the blue illuminated rim design sharpens the visual effect once the light drops. On a driveway, in a car park or across a smooth indoor surface, the RTR setup gets the car moving with the supplied remote control system and included transmitter batteries. The compact racing profile, quick response and illuminated wheel styling suit short speed runs, repeated corner practice and evening cruising alike.
RC cars
1:12 RaceRival Combo, RC car, 2.4G RTR
500404297€59.99
The 1:12 RaceRival Combo brings 2 fully assembled RC cars into one set, creating instant side-by-side racing with matching 2.4 GHz radio control. Each model measures 304 mm in length and uses a 3.7 V Li-Ion drive battery with 500 mAh capacity, giving the pair a compact racing format with rechargeable power for repeated sessions. The set includes 2 remote controls, 2 Li-Ion drive batteries, 2 USB chargers and 4 AA transmitter batteries, so both vehicles are equipped for running from the start. A maximum driving time of 40 minutes keeps races going beyond a quick sprint and leaves room for repeated heats, overtaking attempts and back-to-back comparisons between the 2 cars. The pistol-grip transmitters use a trigger for throttle input and a side steering wheel layout familiar from hobby-grade RC driving. Steering fine adjustment on the vehicles helps correct the running direction when the track or surface calls for a more precise setup. Front LED lighting remains clearly visible as the cars move through indoor floors or paved outdoor sections, while the printed body shells give each model its own strong race-day presence. With an age marking of 8 years and up, the set suits shared racing sessions at home, quick duel formats in the driveway and casual practice laps where both cars can be charged, lined up and sent off again.
RC lorries & RC trucks
1:14 3-axle Material trailer, RC trailer
500907740€699.99
At 1:14 scale, this 3-axle Material trailer brings the look and handling of a working cargo hauler into a detailed RC setup. The 981 mm long body combines a laser-cut steel frame in 3 mm and 1 mm sections with a real wooden floor application, creating a technical build with strong visual contrast between metal structure and load bed. The front wall is made from aluminium, while the rear bumper uses 8 mm aluminium for a solid, sharply defined finish. Left and right steel underride protection adds another authentic construction detail to the lower sides. The CNC-milled aluminium dropsides carry engraved surfaces and are built for active use rather than fixed display, with 9 functional panels, removable dropside posts, and 4 hinges on each dropside made from 1 mm steel. Neodymium magnets handle the locking, giving the side sections a tidy closing action without bulky external catches. Wide chromated wheels with ball bearings and wide tyres support smooth trailer movement, and the included suspension offers an optional 8 mm elevation for a different ride height. A steel spare wheel holder with spare wheel is fitted, and the finished trailer measures 981 x 195 x 210 mm with a weight of 6,900 g. Age 14+
Models & trailers
1:14 Goldhofer BAU STN-L3, low loader kit
500907060€584.99
Heavy-haul transport has a distinct presence in scale form, and the Goldhofer BAU STN-L3 brings that character into a 1:14 low loader kit with a long 1000 mm body, a width of about 200 mm, and a height of 270 mm. The laser-cut, hard-soldered steel profile construction gives the trailer its technical look, while the plateau with tailgate extends the transport layout for detailed truck scenes. The build centres on mechanical functions that suit model-building enthusiasts. The split folding loading ramps are arranged in 3/4 and 1/2 sections and can be folded down by hand for driving operation. A ramp length of 290 mm in the raised configuration is stated in the data. Three rear axles carry twin tyres, and the axle area is detailed with dummy air springs for a scale heavy-duty appearance. Ball bearing mounting supports the running gear, and the 7-chamber taillights can be retrofitted electrically. All columns are mechanically adjustable, and the front support area can be expanded with optional E-support legs. The trailer fits all Tamiya trucks, making it a strong match for detailed tractor units in 1:14 truck layouts. On a workshop bench, in a transport diorama, or coupled for slow manoeuvres with scale cargo, the low deck, upright ramp geometry, and multi-axle layout create the look of a working heavy equipment hauler. Age 14 Years Warning! Not suitable for children under 14 years.
RC tractors
1:16 Deutz-Traktor 8280TTV, RC tractor
500907706€109.99
The Deutz-Traktor 8280TTV in 1:16 scale brings agricultural RC driving into a compact format with a matching trailer and a fully equipped ready-to-run setup. The model uses a 2.4 GHz remote control system and arrives with the drive battery, USB charger and 2 x LR03 AAA transmitter batteries, so all core components for operation are already in the box. Its 7.4 V system pairs with a 500 mAh Li-Ion battery to deliver up to 90 minutes of operating time, giving the tractor enough endurance for repeated hauling runs, careful reversing and steady trailer work. The trailer adds a second handling element to each session, since turns, alignment and positioning need more control than a single vehicle on its own. With 5 frequency channels available, the radio setup supports controlled input during forward runs, direction changes and tighter manoeuvres. The ready-to-run format keeps the focus on driving rather than sourcing the basic operating equipment separately. On the floor, the tractor and trailer combination suits routes with bends, loading-play setups and repeated parking tasks where the longer overall shape changes how each turn is approached. The 8+ age marking fits a model that combines vehicle control, trailer guidance and battery-powered runtime in one clearly structured RC format.
RC cars
1:24 Ford GT, RC car, 2.4 GHz RTR
500404330€24.99
The Ford GT became one of the defining super sports car shapes of its era, and this 1:24 RC car brings that low, wide silhouette into a compact format built for quick laps and precise control. With a fully assembled ready-to-run setup, the model goes straight from charging to driving with the included 2.4 GHz remote control, Li-Ion drive battery, USB charger and transmitter batteries. At 195 mm long, 80 mm wide and 49 mm high, the body keeps the proportions of the road car clear while staying easy to handle on smaller indoor routes. The 172 g weight gives the chassis a light, agile feel in motion, and the fine-tuned steering supports accurate line changes through short straights and tighter bends. Front and rear LED lighting extends the visual effect beyond daylight conditions, while the licensed Ford design and realistic sports car look keep the model closely tied to its full-size inspiration. The 3.7 V drive system uses a 500 mAh Li-Ion battery and reaches up to 60 minutes of driving time at full capacity, making longer sessions possible without frequent charging breaks. Non-slip rubber tires work with the rear differential to maintain traction and stable handling as the car accelerates, turns and settles into repeated circuit runs. Age 6+ marks the recommended age, and the complete RTR format suits first RC laps as well as relaxed driving sessions for motorsport fans.
RC buggys
1:8 Rock Wilder, RC car, 100% RTR
500404257€174.99
The 1:8 Rock Wilder brings large-scale off-road presence to every run with a 530 mm long chassis, full suspension and digital proportional control. In black and red trim, the ready-to-run setup pairs a type 550 brushed motor with water-resistant RC components for driving on mixed terrain where dust, loose gravel and uneven ground are part of the appeal. Its 355 mm width and 220 mm height give the model a broad, stable stance, while the 2552 g weight adds substance as the suspension works through ruts and bumps. Reinforced suspension arms support the independent layout at each corner, and the quick-change battery mount keeps battery swaps straightforward between sessions. The included 7.4 V 3000 mAh Li-Ion drive battery, USB charger, 2.4 GHz remote control and 4× LR06 transmitter batteries cover the core running equipment in one box. Age recommendation: 14 years+ The Rock Wilder suits trackside bashing, open gravel areas and compact dirt routes where the proportional steering and throttle inputs can be used with precision. Water-resistant electronics help the model stay focused on the route when conditions turn messy, and the RTR format keeps the emphasis on charging up and heading out for the next run. Warning! Not suitable for children under 14 years.
RC models in 1:87 scale
1:87 MB 1620 flatbed truck, RC model, RTR
500504159€129.99
The 1:87 MB 1620 flatbed truck with trailer brings compact RC control into H0 railway scenes with a fully assembled 100% RTR setup and finely scaled proportions. At 187 mm in length, the model is sized for dioramas and model railroad layouts where precise movement, lighting and sound add life to streets, depots and loading areas. A 2.4 GHz remote control system handles steering, speed and the switchable engine sound, while the integrated 3.7 V 75 mAh Li-Ion drive battery recharges through the transmitter in about 45 minutes. Front and rear LED lighting supports realistic operation in dimmer layout settings, and the very small turning circle helps the truck work through narrow routes and confined manoeuvring zones. The detailed body uses high-quality plastic construction with fine printing, and the removable tarpaulin changes the look of the trailer for different scene setups. A driver figure adds another scale detail for display, and the included trailer extends the vehicle's presence in transport scenes. With up to 60 minutes of operating time, the model suits longer running sessions on H0 layouts, from careful reversing at a loading bay to steady road movement between buildings and trackside structures. Warning! Not suitable for children under 14 years.
RC models in 1:87 scale
1:87 Mercedes Benz 200/8 Taxi, RC car, RTR
500504171€109.99
The Mercedes Benz 200/8 shaped the look of everyday saloons in the late 1960s and 1970s, and this 1:87 RC car brings that familiar taxi silhouette into a compact radio-controlled format. The small scale and RTR layout combine classic road-car character with immediate driving action on desks, display areas, or smooth indoor surfaces. Its 100% RTR specification means the key running setup is already part of the set, keeping the focus on steering inputs and controlled movement rather than sourcing core equipment first. The included 5 batteries support a ready-to-start configuration straight from the pack. With a recommended age of 14 years, the handling and scale suit enthusiasts who enjoy compact vehicle models with a recognisable real-world subject. The taxi styling gives the body a distinct period look that stands apart from modern racing or off-road themes. Between short driving sessions, the 1:87 format also makes the model easy to place in a collection of miniature road vehicles. It works well as a small RC model for indoor runs, as a conversation piece on a shelf, or as a classic Mercedes Benz subject in a compact hobby lineup. Warning! Not suitable for children under 14 years.
RC models in 1:87 scale
1:87 Mercedes Benz 200/8, RC car, 100% RTR
500504170€109.99
The Mercedes-Benz /8 series shaped everyday motoring in the late 1960s and 1970s, and this 1:87 Carson model captures that familiar saloon silhouette in a compact radio-controlled format. Finished in blue and supplied as a 100% RTR version, the miniature is set up for immediate use with 5 batteries included. Its 1:87 scale gives the model a notably small footprint, making controlled runs possible in spaces where larger RC cars would feel oversized. The classic 200/8 body shape brings a recognisable road-car character to each manoeuvre, while the compact format invites careful steering, short direction changes and neat placement on smooth indoor surfaces. With batteries already part of the set, the focus stays on the driving session itself rather than on sourcing the basic power supply first. Between runs, the blue finish and saloon proportions also make the model easy to place on a desk or shelf as part of a collection of compact vehicles. The combination of RTR convenience, included batteries and 1:87 scale makes this Mercedes Benz 200/8 a concise entry into small-format RC driving for hobbyists aged 14 years and up. Warning! Not suitable for children under 14 years.
RC models in 1:87 scale
1:87 VW Beetle, RC car, 2.4 GHz RTR
500504182€104.99
The Volkswagen Beetle remains one of the most recognisable car shapes of the 20th century, and this 1:87 RC version translates that silhouette into a compact model built for active driving. At 50 mm long, 20 mm wide and 18 mm high, the Bahama blue Beetle combines miniature scale with fully controllable handling and a detailed body that carries the character of the original into H0 format. Its 2WD RWD layout works with a brushed motor to deliver balanced running behaviour, while the 10 g weight keeps the model light on the surface. The officially licensed Volkswagen design is matched with front and rear LEDs that define the car clearly as it moves through table layouts, floor circuits or display-style street scenes. The 100% RTR set includes a permanently installed 3.7 V 40 mAh Li-Ion battery, 4x AAA transmitter batteries and a storage case, so the driving setup is complete straight away. The 2-channel radio system supports controlled runs with a range of up to 50 m, making the Beetle suitable for compact slalom routes, desk-side driving and small indoor courses where accurate line changes matter. Age marking: 14 years. Charging takes place through the transmitter and keeps the model ready for regular sessions between laps.
RC models in 1:87 scale
1:87 VW T1 Bus Van, RC car, car trailer
500504166€114.99
The VW T1 became one of the most recognisable light commercial vehicles of the 1950s, and this 1:87 RC version brings that silhouette into a compact driving format with a matching car trailer. At 115 mm long, 28 mm wide and 21 mm high, the ready-to-run model fits neatly into small layouts while still carrying the bus profile, printed finish and illuminated front and rear lighting. The 2.4 GHz radio system gives stable control for 1-player operation, and the fully proportional setup allows measured inputs instead of simple on-off movement. With a weight of 18 g, the model stays light in hand and easy to place on shelves or in model scenes between runs. The included Li-Ion drive battery is rated at 3.7 V and 75 mAh, while 4 LR03 AAA transmitter batteries are also included in the set. Steering trim supports precise correction when the bus tracks slightly left or right, which is especially useful on narrow routes where the small turning circle can be used to full effect. The display case adds a clean way to store the bus and trailer between sessions or present them as part of a collection. On a desk, shelf layout or compact indoor course, the combination of trailer detail, proportional control and long 50-minute runtime creates a focused micro RC driving session with a strong model-railway scale presence. Warning! Not suitable for children under 14 years.
RC models in 1:87 scale
1:87 VW T1 Kastenwagen Jägermeister, RC car
500504180€104.99
The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 Carson version translates that familiar panel van shape into a compact RC format with Jägermeister livery. At 50 mm long and 20 mm wide, the model brings authentic proportions, detailed printing and front and rear LED lighting to desks, shelves and small indoor driving spaces. Its fully proportional control system gives measured steering and speed response instead of simple on-off inputs. A steering trim function helps fine-tune straight running, while the very small turning radius suits narrow table courses and close obstacles. The 2.4 GHz radio system supports stable control, and the sensitive forward and reverse function makes low-speed corrections easier in confined spaces. A brushed motor and 2WD RWD layout shape the driving character, while the permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time. With a height of 19 mm and a weight of 16 g, the van stays easy to place and store between runs. The set includes a display case for storage, which also keeps the miniature body protected when the model is off the course. 4x AAA transmitter batteries are included, so the RTR format covers the essentials for immediate indoor driving.
RC receivers and accessories
2.4GHz KR-242XT Receiver, 4-channel radio unit
505021021€74.99
The KR-242XT is a compact 2.4GHz 4-channel receiver made for hobby-grade RC installations where clean electronics packaging and dependable channel allocation matter. Its short-format design suits model layouts with limited installation space, while the 4-channel configuration leaves room for more than the core driving functions in compatible radio-controlled builds. Within an RC setup, the receiver acts as the link between transmitter commands and the vehicle's onboard electronics, making channel management a central part of the build. The KR-242XT is positioned for enthusiasts who work with detailed model configurations and need a receiver that fits neatly into tighter chassis sections. The 2.4GHz specification places it in the current standard for modern radio control systems, and the compact housing supports tidy cable runs around surrounding components. With an age marking of 14 Years, it sits clearly in the hobby segment rather than entry-level toy use. This format suits workshop upgrades, replacement installations, and fresh RC builds where the electronics package needs to stay compact. In a carefully planned chassis layout, a short receiver can make the difference between a crowded interior and a cleaner, more accessible arrangement. Warning! Not suitable for children under 14 years.
RC helicopters
Cyber Copter IR 2Ch, RC helicopter, RTF
500507191€21.99
The Cyber Copter IR 2Ch brings compact helicopter flying into a ready-to-fly format with a modern grey fuselage and a focused control layout. At 230 mm long, 95 mm high and with a 190 mm rotor diameter, this RC helicopter stays compact enough for indoor sessions while reaching speeds of up to 10 km/h. Its flight system combines infrared control with 2 channels for clear directional input, and the integrated gyroscope helps keep movement steady once airborne. Fine tuning comes from individually adjustable left and right trim, allowing the flight path to be corrected to suit the room and the handling style. The switchable LED position lights are activated from the transmitter, making the model easier to track visually when the light drops at dusk. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime per charge, and the USB charger keeps charging straightforward between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8 Years
Military aeroplane models
Italeri JAS-39D Gripen Twin Seater Model Kit
510002664€26.79
The Italeri JAS-39D Gripen Twin Seater model kit brings a modern Swedish fighter into 1:48 scale, combining the compact canard-delta silhouette with the extended 2-seat cockpit layout of the training variant. The subject entered service in the second half of the 1990s, and the finished aircraft carries the sharp lines, single engine exhaust and multirole character that define the Gripen family. This JAS-39D version was developed to meet advanced pilot training requirements while keeping essentially the same performance as the single-seat fighter. That background gives the build a clear technical identity, with a configuration linked not only to training duties but also to reconnaissance and ground-attack missions. The aircraft's aerodynamic design is noted for excellent maneuverability, and the full-size jet reached a maximum speed of Mach 2.0. The box image also identifies this release as a New Decals Edition, with a Super Decals sheet for 4 versions. Figures are not included. On the workbench, the 1:48 scale gives room to focus on painting, markings and the distinct proportions of the twin-seat canopy. Once completed, the model fits naturally into modern military aircraft collections, whether displayed as a Swedish air power subject or alongside other late 20th century combat aircraft. 14 years is the recommended age. Warning! Not suitable for children under 14 years.
Model trucks
Italeri Mercedes-Benz Wrecker Truck Model 1:24
510093808€76.99
The Italeri Mercedes-Benz Wrecker Truck Model 1:24 captures the distinctive recovery configuration developed from the Mercedes-Benz MB 2238 6x4 heavy-duty road truck. Instead of a standard haulage layout, this scale build focuses on the specialist wrecker conversion, with its rear-mounted crane and service body shaping the silhouette of a vehicle built to recover broken-down or accident-damaged heavy trucks. The full-size MB 2238 combined engine power with a solid chassis and suspension layout, and that mechanical foundation defines the character of this model. The recovery body adds numerous storage compartments for tools and towing equipment, giving the finished truck the purposeful look of a roadside support vehicle rather than a conventional transporter. In 1:24 scale, those details create a build with strong workshop presence and a clear link to long-distance heavy vehicle operations. The subject also stands out through its 6x4 configuration, a key part of the truck's weight distribution when handling demanding towing work. On the bench or in a collection of commercial vehicle subjects, the wrecker format brings a different visual rhythm from standard tractor units and cargo trucks. The crane, compartment layout and recovery role give the finished model a focused industrial identity that suits display alongside other classic heavy transport builds. Warning! Not suitable for children under 14 years.
Trailers & accessories
Italeri Reefer Trailer Model Kit 1:24 Scale
510103904€62.99
The Italeri Reefer Trailer model kit brings a latest-generation refrigerated semitrailer into 1:24 scale with a finished length of 58.7 cm and a distinctly European freight profile. The long box body, front-mounted refrigeration unit and triple-axle rear section create the look of a temperature-controlled trailer waiting at a loading dock or lined up with a tractor unit in a road transport display. This assembly kit is built around the detailing that gives a reefer its working identity. The chassis construction, underbody equipment and support-leg structure shape the trailer from the frame upward, while the new wheels update the running gear for a more current appearance. Large side graphics for NORD CARGO, route names including Barcelona, Castellon, Madrid, Malaga and Moerdijk, plus rear-door markings and registration options add a commercial fleet character drawn from European cold-chain transport. The finishing stage also includes paintwork and decal application, which gives the long side panels and rear doors their full visual impact. With 600 minutes assembly time, the build suits a slower bench session focused on alignment, painting and final decoration. Paints, cement and tools are required separately. Once completed, the 1:24 trailer works well as a standalone display subject or as part of a larger truck modelling scene with depot, warehouse or highway freight context.
RC remote controls
MC-8 2.4GHz MX-F TR set, RC radio system
500501040€104.99
The MC-8 2.4GHz MX-F TR set brings game-controller handling to an 8-channel RC radio system, combining the transmitter with the MR-8 micro receiver for compact installation in demanding model layouts. With the receiver measuring 27 x 28 x 15 mm, the set suits builds where available space matters as much as dependable multi-channel control. Its control layout goes beyond basic steering and throttle. The left and right 3D joysticks each include a push-button function, opening extra input options for assigned model functions. A Uni/Fut. connector system supports integration with compatible equipment, and the set is specified for use with TAMIYA MFC-01, MFC-02 and MFC-03 as well as DMD/MF units. The 2.4 GHz transmission standard supports modern radio operation for hobby models that need several functions managed from one handset. In workshop setups, scale trucks and function-rich RC builds can benefit from the extra channels for lighting, sound or special movements where the connected system supports them. 4 AAA batteries are required separately for operation, making the set ready to slot into existing hobby equipment with a straightforward power requirement.
Diecast model kits
Mercedes 300 SL Model Car 1:8 Red Replica
520010114€1,049.99
The iXO Premium Collectables Mercedes 300 SL captures one of the most recognisable coupe silhouettes in motoring history as a 1:8 scale model in red. The long bonnet, rounded roofline and low body create a strong display presence, while the glossy finish and bright trim bring out the flowing shape seen on the original car. Across the body, the model reproduces hallmark Mercedes-Benz details such as the front grille star, chrome bumpers, side mouldings and the vent section behind the front wheel with its horizontal bars. Round headlamps, windscreen wipers, mirrors, window frames and period-style wheel covers add further definition to the exterior. Through the clear glazing, the beige interior remains visible and gives the cabin more depth than a closed, darkened shell. With 602 parts, the construction centres on recreating the car's proportions and trim rather than reducing the shape to a simplified toy-like form. Assembly is required, and the stated build time is 2100 minutes. That extended format suits a display-focused project in which the bodywork, cabin details and brightwork can be appreciated step by step. Once completed, the model works as a striking centrepiece on a shelf, in a study or alongside other classic vehicle replicas. Warning! Not suitable for children under 14 years.
RC yachts
Nano Racer Yacht 2.4G
500108057€19.99
RC action on the water! With the Nano Racer Yacht, luxury RC fun on the water is realized. The ready-to-run yacht model delivers full driving fun right after unpacking and brief charging. It is controlled with a 2.4 GHz radio remote control and offers a range of up to 40 meters. Thanks to the safety shutdown, the propellers only work when the model is in contact with water. All RC components are water-resistant, making the yacht ideal for exciting action on the water. The set includes a LiPo battery and clear instructions for quick start-up. Compact, fast, and easy to control, the Nano Racer Yacht is a fun watercraft for hobby and play.
RC helicopters
Nano Tyrann 230 Gyro, RC helicopter, 2CH IR
500507155€24.99
Compact dimensions and a coaxial rotor layout give the Nano Tyrann 230 Gyro a light, agile presence in indoor flight, while intelligent gyro electronics keep the model composed during lift-off, hovering and direction changes. At 225 mm long, 97 mm high and only 31 g in weight, this 2-channel RC helicopter brings controlled handling into a format that is easy to store and quick to prepare. The infrared control system focuses the flying experience on the core inputs, with left and right trim on the transmitter to correct the track when needed. A 3.7 V 130 mAh LiPo flight battery powers up to 8 minutes of flying time, and charging runs through the included USB cable. The rotor diameter of 180 mm gives the helicopter a balanced footprint for indoor rooms, where short climbs, hovering practice and careful turns can be repeated in a manageable space. The switchable LED adds a visible point at the nose during flight and can be controlled directly from the transmitter. The ready-to-fly set suits spontaneous sessions in living rooms, hobby spaces or other indoor areas where compact RC aircraft can be flown with precision. Age 12 years and up. Only suitable for indoor use.
Cars
Scalextric 1:32 TFATF Dodge Charger Dom Toretto
560004573€67.99
The Scalextric 1:32 TFATF Dodge Charger - Dom Toretto brings a recognisable Fast and Furious machine into slot racing with a compact scale that suits repeat laps, close duels and character-led grid lineups. The Dodge Charger body gives the car a strong screen-linked presence on the circuit, while the guided slot format keeps the action focused on throttle control, lane discipline and clean corner exits. As a 1:32 slot car, it fits naturally into layouts built around the same scale and supports side-by-side racing with other compatible models in the range. The TFATF designation ties the car directly to the Fast and Furious world named in the data, giving collectors and racers a specific vehicle identity rather than a generic muscle car shape. The Dom Toretto version adds a named character connection that strengthens themed race setups and display shelves. 14 Years is the stated age marking. On home circuits, the car suits short sprint sessions, repeated lap practice and head-to-head runs where the Dodge Charger silhouette stays easy to pick out through bends and on straights. Between races, the same 1:32 format also makes it a strong addition to a shelf lineup built around film cars and slot racing favourites.
Cars
Scalextric Jaguar MK2 G. Williams Racing 1:32
560004596€59.99
Scalextric Jaguar MK2 G. Williams Racing brings a classic competition saloon into 1:32 scale, combining the long roofline, upright proportions, and period racing character that make the MK2 such a recognisable name on a slot layout. The compact scale suits home circuits where close racing, lane changes, and repeated lap running keep the car in constant view. The G. Williams Racing decoration gives this version a specific track identity rather than a generic road-car finish, which adds extra appeal for collectors who enjoy named racing subjects. At 1:32 scale, the car sits naturally alongside other vehicles in the same format, helping create a consistent field for display or race-day line-ups. The model is marked for ages 14 years and up, matching hobby use where handling, placement on the slot, and layout setup are part of the routine. On a shelf, the Jaguar MK2 shape brings a strong vintage racing presence through its saloon silhouette and competition livery. On the circuit, the same body style adds variety to mixed grids, whether the session focuses on classic touring themes or simply on running a distinctive car through repeated laps at home.
Cars
Scalextric Nissan R34 Skyline 1:32 Car
560004674€67.99
Scalextric Nissan R34 Skyline brings the 2Fast 2Furious theme into a 1:32 slot car format that suits both racing layouts and display shelves. The compact scale gives the car a familiar presence on track while keeping it easy to line up with other 1:32 vehicles in the same collection. The Nissan R34 Skyline name carries strong recognition among performance car fans, and that identity translates neatly into a model made for powered racing systems. As part of the powered vehicles and electric car accessories category, this car is intended to extend an existing setup rather than stand alone. The 14 Years age marking places it in a hobby-focused range, making it a fitting choice for older fans who build themed grids, compare liveries and rotate cars through regular sessions. The 1:32 format also helps when organising storage, planning race pairings and keeping a collection consistent across a slot layout. On the track, the film-linked styling gives each run a clear visual character, whether the car is joining a head-to-head race, filling a franchise-themed line-up or taking a place in a display cabinet between sessions. It also works well as an additional car for expanding a current Scalextric collection around recognisable road and screen icons. Warning! Not suitable for children under 14 years.
Cars
Scalextric Porsche 963 Daytona 25 1:32 Car
560004653€59.99
Scalextric Porsche 963 Daytona 25 captures a current endurance racing shape in a 1:32 slot car format, pairing the low, wide prototype profile with the JDC Miller MotorSports livery for a focused circuit presence. The Porsche 963 name and Daytona 25 race theme give the car a recognisable motorsport identity that reads clearly on the track as it moves through bends, chicanes and straights. The 1:32 scale keeps the car aligned with a widely used slot racing format, making it a natural fit within existing race line-ups and garage displays. Its modern prototype silhouette brings a different visual character from GT and touring entries, with a body shape defined by endurance-racing proportions rather than road-car cues. The named JDC Miller MotorSports decoration adds team-specific detail instead of a generic race finish, which helps each lane assignment and race order stay easy to follow during head-to-head sessions. Batteries are not included. With an age marking of 14 Years, this car sits in the older hobby category and suits collectors as well as regular home circuit use. It works well as a single addition to a current grid, as a themed Daytona entry for endurance-style running, or as part of a broader modern prototype line-up built around real race names and liveries. Warning! Not suitable for children under 14 years.
Cars
Scalextric VW Golf MK1 1:32 Racing Car
560004625€59.99
Scalextric VW Golf MK1 1:32 Racing Car brings Malcolm Jeffs Racing style into a compact slot car format that reads clearly on the track and on display. The 1:32 scale gives the body a balanced footprint for home racing layouts, while the VW Golf MK1 shape carries the crisp hatchback profile that made this model a familiar sight in touring-car circles. The product data states an age marking of 14 Years, placing this model within a hobby-led range rather than early-years play. Its named Malcolm Jeffs Racing livery gives the car a specific motorsport identity instead of a generic road-car finish, which helps it sit naturally alongside other competition-themed vehicles in a collection. As part of the powered vehicles category, it is designed for electric or battery car set use, and the compact scale makes it easy to combine with existing 1:32 slot racing scenes. The short designation focuses on a single real-world model and racing name, giving the car a clear collector angle as well as track appeal. Set on a home circuit, the VW Golf MK1 shape adds a recognisable silhouette through bends, straights and grid line-ups. Away from racing sessions, the Malcolm Jeffs Racing decoration and 1:32 proportions also suit shelf display with other classic motorsport subjects from the Scalextric range. Warning! Not suitable for children under 14 years.
Model trucks
Scania T143 M500 Top Line 1:24 Model Kit
510000736€62.99
The Italeri Scania T143 M500 Top Line captures a landmark heavy truck in 1:24 scale, translating the presence of the 1990s road icon into a detailed assembly kit. Its subject is the Scania 143 M500 Topline, a tractor unit known for combining long-distance capability with a high cab format that gave the vehicle its unmistakable road profile. The original truck was defined by a 500-horsepower V8 engine and a 16-speed transmission, and those specifications give this model much of its appeal as a technical replica. The Topline configuration is central to the look, with a high, spacious cabin that set this version apart within commercial transport. The source vehicle was also associated with an advanced braking system, air suspension, strong efficiency and substantial load capacity, placing it firmly in the world of heavy logistics. Assembly is required, and the stated build time is 600 minutes. The box contents list an assembly kit. On the workbench, the 1:24 format gives the truck a scale large enough to reward careful painting and finishing while keeping the build focused on a single classic tractor unit. Once completed, the model suits display settings that highlight cab shape, grille details and the character of a well-known European long-haul design. Minimum age: 14 years. Warning! Not suitable for children under 14 years.
- 16 %
RC quadcopters
X4 Quadcopter Yairo, RC aircraft, 2.4 GHz RTF
500507201€42.99
The X4 Quadcopter Yairo brings compact quadcopter flying together with illuminated detail and straightforward control in a ready-to-fly format. With a ring diameter of 150 mm, a height of 37 mm and a weight of 52 g, the model stays light and agile in the air while the three-colour LED setup gives each flight a vivid visual presence. Its electronically rotatable LED ring is controlled by the remote control, adding a moving light element that changes the look of the quadcopter during flight. The 3.7 V 500 mAh LiPo flight battery supplies up to 8 minutes of runtime, and the included USB charger keeps the setup simple between sessions. 4 frequency channels support responsive handling, while the compact dimensions make the model easy to carry to open indoor spaces or calm outdoor areas. The included LR06/AAA transmitter batteries mean the full set is ready for use straight from the contents provided. Short practice flights, evening hovering sessions and quick manoeuvre runs all suit this RC aircraft well. The 8+ age marking and 1-player format make it a focused flying model for learning control inputs, refining reactions and enjoying illuminated flights with a compact quadcopter layout.
RC speed boats
XS Deep Sea Dragon, RC submarine, 100%RTR
500707117€39.99
Compact RC submarines bring a different kind of model action, and the XS Deep Sea Dragon shifts that action below the surface. This 100%RTR RC submarine combines a compact orange hull, 3-channel 40 MHz control and blue LED illumination for visible manoeuvres in baths, pools and aquaria. The set includes the mini submarine with RC system, a 3.7 V 90 mAh Li-Ion drive battery, a USB charger, 2 transmitter batteries and instructions. Forward, backward, left and right steering are joined by dive and surface functions, so movement is not limited to a flat path across the water. The blue LEDs stay visible during operation and help keep the model in view while it changes depth. With up to 6 minutes of runtime, each charge suits short underwater runs with a clear start and finish. The USB charging cable can be stowed in the transmitter, so the charging lead stays with the control set between sessions. In use, the compact format suits smaller water spaces where tight turns and depth changes stay easy to follow. Age 8+ marks the recommended age. The submarine is intended for fresh water use in swimming pools, baths and aquaria; do not use in salt water.
RC servos
1:10 KO RSx4S-one10X, servo, low profile
505030137€124.99
The KO RSx4S-one10X is a 1:10 low-profile servo shaped for compact RC chassis where installation height and steering packaging need careful control. Its metal gear layout and the stated 11.8 V specification place it firmly in performance-focused electronics setups, giving model-building enthusiasts a concrete steering component for advanced builds. The low-profile housing suits layouts where body clearance, linkage position and surrounding electronics leave little spare room. In that context, the 0.10-second speed figure supports fast steering response when direction changes need to happen with little delay. The servo format also makes it relevant for 1:10 on-road and competition-style configurations that rely on tidy component placement rather than oversized hardware. As an electronic control component, it belongs in a build where the steering system, power supply and chassis geometry are chosen as a matched package. On the bench, the compact form helps when planning a clean electronics layout around the steering area. Once installed in a compatible 1:10 model, the combination of low-profile dimensions, metal gears and high-voltage operation supports focused tuning for precise handling response. Warning! Not suitable for children under 14 years.
RC truggies & RC monster trucks
1:10 Torque Beast, RC car, 2.4 GHz RTR
500404358€129.99
The 1:10 Torque Beast brings classic monster truck presence to RC driving with a 430 mm length, 310 mm width and 200 mm height that give the chassis a broad, purposeful footprint on rough ground. A solid bumper with integrated LED lighting adds a bright front-end detail, while water-resistant RC components and splash-proof electronics support running when the surface turns damp or dusty. At 1364 g, the model combines its size with a manageable overall weight that suits quick direction changes and repeated runs. The 7.4 V 1500 mAh Li-Ion drive battery is included, and the stated running time reaches 25 minutes before the pack heads back to the USB charger. The fully assembled RTR format keeps the focus on driving rather than setup, and the 2.4 GHz system supports stable control without the frequency crystals older RC systems required. Minimum age: 14 years. On gravel paths, compact dirt sections or uneven yard surfaces, the Torque Beast has the ground clearance and tire format to keep the run lively without losing control. Evening sessions gain extra character from the front LED lighting, and the included battery set means the truck is equipped for the first outing straight away.
RC Crawler
1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR
500404315€249.99
The 1:10 X-Crawlee Pro 3.0 brings crawler driving into a 43.5 cm format built for rough ground, with a 270 mm width, 235 mm height and a weight of 2280 g that gives the model a planted stance on the trail. Its 100% RTR setup puts the focus on driving from the first session, while the 2.4 GHz remote control system keeps control inputs clear and direct. Power comes from the included 7.2 V NiMH drive battery with 1800 mAh, charged via the included 7.2 V / 1 A USB charger. At full capacity, driving time reaches up to 70 minutes, giving longer runs across stones, dirt tracks and uneven paths without frequent charging breaks. The controller is compatible with NiMH and LiPo batteries, which broadens battery choice for later setup changes. Full ball bearings support efficient running through the drivetrain, while the suspended rigid axles give the crawler the axle movement needed for slow, technical sections. The ready-to-run set includes the model, the radio system, the drive battery, the USB charger, 4 AA transmitter batteries and the manual. With a 14 years+ age marking and a single-vehicle setup, the X-Crawlee Pro 3.0 suits focused crawling sessions where line choice, throttle control and steering precision shape every climb. Warning! Not suitable for children under 14 years.
RC truggies & RC monster trucks
1:10 XS Tekuro, RC car, 4WD 100% RTR
500404360€199.99
The 1:10 XS Tekuro brings fast off-road driving into a 410 x 300 x 175 mm format with permanent 4WD, a high-torque 550 brushed motor and a top speed of up to 40 km/h. Grey and green bodywork, 110 mm monster tyres and a raised stance give the model a strong trail-ready presence before the first run even starts. Its drivetrain is built around a central steel cardan shaft, reinforced steel drive shafts at the front and rear, and metal differentials with steel bevel gears on both axles. Ball-bearing mounting throughout supports efficient running, while the XT60 high-voltage plug system and quick-change battery holder simplify battery swaps between sessions. The 8 kg steering servo uses a metal gearbox and water-protected construction, matched with splash-protected electronics and a water-protected 2.4 GHz radio system. The included 2600 mAh 7.4 V Li-Ion battery supports about 15 minutes of driving time, and the complete RTR setup keeps preparation focused on charging and heading out. At 1741 g, the chassis has the planted feel needed for dirt paths, gravel sections and uneven ground. Tight turns, short bursts of acceleration and repeated launch attempts all suit the Tekuro's mix of traction, suspension travel and wheelie-ready rear setup. Warning! Not suitable for children under 14 years.
Electronics
1:14 12V LED-PCB Taillight, model accessory
500907388€57.99
A 7-section taillight layout is a defining detail on many scale truck builds, and this 1:14 LED-PCB set brings that look into a compact 12V lighting accessory. The pair is designed as matching left and right boards, each marked L or R, creating a clear basis for symmetrical rear installation on a model vehicle. Each green PCB carries surface-mounted electronic components and preattached wiring, giving the lighting setup a tidy technical character once installed behind the rear light positions. The 5 attached leads on each board are colour coded in blue, black, yellow, red and white, which helps keep the wiring paths distinct during integration into an existing electrical layout. Mounting holes near the lower corners support fixed placement inside the body or light housing where a secure fit is needed. In workshop-style upgrade projects, the mirrored board design suits truck or trailer rear ends that need matching light units on both sides. The 12V specification makes the set suitable for model electrical systems built around that voltage, while the compact board format leaves room for careful routing and clean finishing in detailed 1:14 installations.
Models & trailers
1:14 2-Axle Dump Semi-Trailer, trailer
500907312€589.99
Built in 1:14 scale, this 2-axle dump semi-trailer brings the look of a full-size tipper into a model-building format with a rigid PVC body, a CNC-milled aluminum frame and a 4-wheel layout. The silver dump body, black chassis and raised front platform create the working profile of a road-going bulk trailer, whether coupled to a tractor unit or parked on its support legs. The assembly kit focuses on mechanical detail rather than simplified styling. Vertical body panel lines, mudguards, rear underrun protection and ladder elements give the trailer a technical finish, while the king pin can be adjusted to suit the setup. The chassis uses new axles with 8 mm lift, and the rear section is shaped around a mechanically unlocking tailgate for realistic unloading action when a tipping function is installed separately. 7-chamber taillights and dummy air spring details extend the scale appearance across the rear and underside, and the ball-bearing wheel setup supports smooth movement during handling. On a workshop shelf, in a truck yard scene or behind a matching 1:14 tractor, the semi-trailer adds a strong construction-transport theme with visible engineering throughout the frame and body. Assembly kit and manual are included. A spindle drive, motor, battery, switch, radio gear, a charger and paints are required separately for expanded functions and finishing. Warning! Not suitable for children under 14 years.
Models & trailers
1:14 2-Axle Dump Trailer, trailer kit
500907425€519.99
The 1:14 2-Axle Dump Trailer brings working tipper style into a scale truck setup with a tandem-axle layout, a gray rigid PVC dump body and a steel profile frame with laser-cut, laser-welded construction. Built as an assembly kit, it focuses on the mechanical character of a real dump trailer, from the drawbar and support leg to the rear gate area and underbody linkage. The chassis uses 8 ball bearings across the wheel setup, giving the running gear a more precise feel as the trailer rolls behind a compatible tractor unit. Fulda Variotonn wide offroad tyres and the trailer axle with air ride dummy push the model further toward commercial-vehicle realism, while the 7-section tail lights add a recognisable rear-end detail. The automatic back wall locking with 2-hook design gives the rear section a functional finish that matches the tipper concept. The support leg keeps the trailer upright when detached, and the drawbar with hitch eyelet completes the classic central-axle trailer layout seen in heavy haulage scenes. On the bench, the kit offers a focused build around frame, axle and body assembly. Once finished, the trailer suits construction, transport and unloading scenes in 1:14 scale layouts, whether parked as a standalone model or coupled into a larger truck combination. Age 14 Years. Spindle drive, gear box motor, a control switch and paints are required separately. Warning! Not suitable for children under 14 years.
Models & trailers
1:14 2-Axle Material Trailer, trailer kit
500907624€574.99
Built for 1:14 truck scenes, the 2-Axle Material Trailer brings a long loading bed, twin-axle layout and working drop-side bodywork into a scale transport build with a clear commercial look. The grey panel sides, dark front bulkhead and wood-look floor give the trailer the character of a real material hauler, whether it is coupled behind a road tractor or parked at a loading point. The kit structure goes beyond a simple rolling chassis. The assembly sequence includes 2 axle units, a pivoted bogie, a main frame with crossmembers, mudguards, underride protection, rear bumper parts and upright posts around the bed. Ball bearings are fitted into each wheel hub, and the axle geometry offers normal height or a +8 mm position during assembly. Rear light housings are part of the build, and the manual also shows optional LED taillight boards as separate accessories. A spare wheel holder and additional fittings are listed as optional accessories rather than included contents. Once assembled, the trailer suits realistic loading and transport layouts in 1:14 scale, from building-material scenes to depot and yard setups. The opening side panels and rear section support a more active display style, while the detailed underframe, mudflaps and side protection parts give the finished trailer convincing presence from low viewing angles. Warning! Not suitable for children under 14 years.
Models & trailers
1:14 2-axle Riedler, stanchion trailer
500907622€509.99
The 1:14 2-axle Riedler stanchion trailer brings timber-haul detail into a scale transport setup with a steel sandwich frame, solid aluminium stanchions and a long, purposeful silhouette. At 620 x 190 x 305 mm and 2,600 g, the trailer adds real presence to a model road train while reflecting the look of the full-size Riedler vehicle named in the licence. Its mainframe uses 3 mm and 1 mm sheet steel parts that are laser cut and CNC bent, and the bogie follows the same sandwich construction for a consistent mechanical layout. The mounted bogie is adjustable and uses sliding pads to support manoeuvring through tighter course sections. A one-piece drawbar in fibre-reinforced plastic carries a chequer plate application and is held at a coupling height of 75 mm by 2 springs. The semitrailer axle includes dummy pneumatic springs, while the left and right underride guards and the CNC-milled rear bumper add further metal detail. The stanchion holders can be loosened with 2 grub screws, then repositioned or removed to suit different loading arrangements for logs or other long cargo. Ball-bearing mounted chromium wheels with wide tyres, mudguard splash protection, bumper mud flaps, a licence plate holder and 7-compartment rear lights build up the finished transport character. A decoration set is included. Age 14 Years. The Carson towing coupling 500907182 is required separately for use on the TAMIYA Volvo FH16 tractor unit. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 2-Speed Shift Gearbox Compact, gearbox
500907265€199.99
A 2-speed transmission changes the character of a scale truck build, and this 1:14 Compact gearbox brings that function into a neatly machined aluminium unit. The compact housing gives the drivetrain a technical focal point while keeping the installation footprint suited to tighter chassis layouts. The assembly data points to use with the original Tamiya motor, so the gearbox is built around a clearly defined motor fitment rather than a vague universal claim. The housing uses a front circular mounting face with multiple screw points, creating a structured base for fastening into the model. A shaft coupling is secured with a 3 x 3 mm set screw, and the instructions specify gel-type thread lock on the marked fastening point for a firm mechanical connection. The motor plate is attached with 3 x 8 mm screws, and an assembly dimension of 11 is shown in the motor fitting step. An optional servo mount for the 2-speed function is referenced in the documentation. In a 1:14 road truck or working vehicle project, this gearbox suits builders who want the drivetrain to feel more like a scaled mechanical system rather than a simple direct drive layout. It also fits detailed upgrade builds where aluminium parts, visible fastening points and a dedicated shifting mechanism add workshop character to the chassis.
Models & trailers
1:14 20Ft. Sea-Container, kit, trailer load
500907335€199.99
Freight containers shaped modern transport with a standardised form built for road, rail and port handling. This 1:14 20Ft. Sea-Container Kit brings that familiar cargo silhouette into a scale truck setup with a 432 mm length, 180 mm width and 185 mm height. The structure combines an anodised silver aluminium frame with plastic sheet body sections that reproduce the look of a traditional container. Corrugated surfaces, corner details and the separate frame layout give the model the character of a working freight load rather than a plain box shape. The plastic panels are paintable, which supports custom liveries, fleet styling or a weathered finish that matches a chosen tractor unit and trailer combination. At the rear, the doors are movable and fitted with a locking mechanism, so the handling detail is part of the build rather than only a visual effect. The container is designed for the 2 axle container semi-trailer 500907334 and locks to the chassis via twist-locks. That mounting method reflects the technical logic of full-size container transport and helps the model sit naturally in logistics, harbour or long-haul display scenes. 14 Years marks the recommended age.
Models & trailers
1:14 20Ft. Semitrailer, trailer kit, tandem axle
500907334€274.99
Built around a 1:14 scale layout, the 20Ft. Semitrailer kit brings container transport style into a detailed truck setup with a black anodised aluminium frame and a compact tandem-axle format. The 475 mm long chassis creates a clear, purposeful silhouette behind a tractor unit, while the 180 mm width and 135 mm height keep the proportions aligned with scale road-haulage scenes. The running gear combines swing axle suspension with flat springs, giving the underframe a more technical, model-engineered character than a plain static trailer base. Tyres with foam inserts add substance to the wheel setup and support a fuller tyre shape on the rims. Mechanical seat posts strengthen the parked semitrailer look at the front section and add another visible chassis detail for display or workshop scenes. The open kit format also leaves room for a container-focused build concept rather than fixing the trailer to a single body style from the outset. Coupled to a matching truck, the semitrailer suits freight yard layouts, road transport displays and scale driving sessions built around container handling themes. A suitable lamp set, 300056502, is available for builders who want to extend the trailer with matching light equipment. Age 14 Years
Basic accessories
1:14 3+1-section Trailer Taillight, model part
500907261€15.99
A 3+1-section taillight layout is a familiar detail on working trailers, and this 1:14 scale set brings that look into model form with compact rear light components for truck and trailer builds. The combination of shaped housings and separate coloured inserts gives the rear end more structure than a printed or plain surface alone. Silver-grey moulded parts form the taillight bodies, while the transparent inserts add the distinct colour zones that define each section. The set includes paired components for a balanced rear installation, making it suitable for left and right placement on a trailer model. The small parts format suits careful detailing work, especially where scale realism depends on visible separation between housing and lens areas. On display, the layered construction creates a more technical finish; on a running model, it strengthens the road-vehicle character of the rear section. This accessory fits naturally into workshop sessions focused on upgrading a trailer body, refining a custom build, or replacing simplified rear details with a more defined light arrangement. The 14 years marking is stated for the set, matching its small-scale hobby character and detail-focused handling.
Models & trailers
1:14 3-Axle Flatbed Trailer III, trailer
500907650€539.99
Heavy transport takes shape in 1:14 scale with the 3-Axle Flatbed Trailer III, a detailed kit built to pair with TAMIYA tractors. The long platform, solid front wall and multi-axle layout give the model the look of a working road trailer ready for oversized loads, machinery or palletised cargo. The chassis uses a laser-cut steel frame in 3 mm and 1 mm material, supported by a massive aluminium front wall and steel underride protection on the left and right sides. A bumper made from 8 mm aluminium adds another strong visual and structural element at the rear. The loading area measures 981 mm in length, with an overall width of 195 mm and height of 210 mm, giving the trailer a notably long deck in this scale. At 4,400 g, the assembled model carries a substantial presence on display and in convoy scenes. The new trailer suspension can be built at normal height or with the included +8 mm elevation, adding flexibility to the finished stance. The real wood deck surface and recessed fastening points suit scale freight setups, from construction loads to industrial transport scenes. Ball-bearing wheels support smooth rolling movement, while the spare wheel mounted in its steel holder strengthens the authentic commercial-trailer look. Age 14+ marks the recommended age. The trailer can also be expanded with separately available accessories, including a conversion kit with functional aluminium side walls for building-material transport.
Models & trailers
1:14 3-Axle Fliegl Megarunner, trailer kit
500907235€634.99
Curtain-side trailers shape the look of modern road freight, and the 1:14 3-Axle Fliegl Megarunner brings that transport character into a detailed model-building project. The assembly kit captures the long, low stance of a European semi-trailer with a 995 mm length, a 195 mm height and a red curtain body that stands out clearly beside the white front and rear sections. The build centres on a laser-cut steel frame, steel front wall and 3-axle layout, creating a technical structure with the layered detail that model-building enthusiasts look for in workshop sessions. Along the sides, the curtain body is tensioned with multiple fasteners, while the rear section uses opening doors with a 270° hinge layout for a more authentic trailer finish. Half-round mudguards, a single-arm steel spare wheel carrier and aluminium underride protection add the kind of hardware normally seen underneath full-size transport equipment. The rear bumper carries a laser-cut Fliegl logo, and the wide tyres with chromed rims complete the road-going stance with a bright contrast against the darker chassis parts. On a shelf, in a depot scene or coupled to a 1:14 tractor unit, the trailer adds a strong logistics presence through its triple-axle proportions and curtain-side bodywork. The kit format makes the construction itself part of the appeal, with the manual included for step-by-step assembly. Warning! Not suitable for children under 14 years.
Models & trailers
1:14 3-Axle Low Loader, trailer, gooseneck
500907700€849.99
Heavy-haul trailers are defined by their proportions, and this 1:14 3-axle low loader captures that look with a long low-bed platform, a stepped gooseneck front section and a rear triple-axle group. The red frame, wood-look centre deck and black running strips create the technical contrast seen on full-size transport equipment, whether the trailer is coupled to a matching tractor unit or shown as a standalone workshop build. The construction goes beyond a simple shell. The manual shows 6 wheel assemblies with ball bearings, a multi-part frame with cross members in 74 mm and 81 mm lengths, and deck sections that lock into place across the chassis. Rear details such as warning boards, mudflaps, lights, hazard markings and LONG VEHICLE graphics build the road-going character of the model. The trailer also supports optional upgrades including a spindle drive gearbox motor, a control switch for the lifting mechanism, LED tail light boards, rectangular lights and an orange flashing beacon. On a finished 1:14 truck combination, the low central bed suits scale transport scenes with construction machines, agricultural vehicles or other oversized loads. The long deck and realistic rear section also make the model a strong centrepiece for shelf display, depot layouts and heavy-transport dioramas. Required separately are a gearbox motor for the lifting device and a control switch for manual lifting. Warning! Not suitable for children under 14 years.
Models & trailers
1:14 3-Axle Semi-Trailer Ver.III, trailer
500907792€689.99
The 1:14 3-Axle Semi-Trailer Ver.III recreates the long, enclosed form of a box trailer with a white body, red chassis and a detailed 3-axle layout that gives a truck combination a convincing road-going presence. Extended support legs at the front let the trailer stand detached, while the wide rear opening sets up loading scenes with the doors swung fully outward. Details across the chassis and body focus on the hardware that defines a working trailer. The side panels use a screwed sandwich-look construction, and the semi-circular mudguards frame the rear wheel area with a clean commercial-vehicle profile. At the back, an aluminum rear bumper carries 7-section taillights for a technical finish that matches the transport theme. A steel spare wheel holder with spare wheel adds another workshop-style detail to the underframe, and the manually adjustable aluminum trailer support legs underline the functional character of the model. Combined with a compatible 1:14 tractor unit, the trailer suits realistic freight setups, depot scenes and road-train display builds. Open rear doors, visible cargo space and the multi-axle chassis also make it a strong centrepiece for transport layouts focused on loading bays, yard parking and long-haul combinations. Age 14 years+ Warning! Not suitable for children under 14 years.
Models & trailers
1:14 3-Axle Stanchion Trailer, logging trailer
500907629€599.99
Built around a 1:14 scale and a 3-axle layout, this stanchion trailer brings the look of a dedicated timber hauler into a detailed model format. The red chassis, silver stanchions and black fenders create the unmistakable profile of a forestry transport trailer, with the long frame set up to carry elongated loads such as logs or poles in a convincing road-going arrangement. The structure develops through a multi-stage build with 6 wheel assemblies, ball bearings in the wheel hubs and 3 axle units mounted beneath the frame. The suspension uses a new design, and the axle build includes a choice between normal height and a raised +8 mm position. Dummy air suspension details add another layer of scale realism around the running gear. Side underrun guards, a rear bumper, rear light details and a front holder with front plate shape the trailer into a complete heavy-transport subject rather than a simple rolling chassis. On the bench or coupled into a 1:14 truck setup, the trailer suits display scenes centered on forestry, construction or long-load transport. Support legs hold the trailer upright when parked, while the front bulkhead and paired stanchions define the loading zones clearly for a purposeful finished look.
RC truck accessories
1:14 3-Chamber Taillight PCB, RC lighting set
500907679€80.99
Compact rear lighting adds a sharper scale finish to 1:14 vehicle builds, and this 3-chamber taillight PCB set brings that detail into a small round format. With dimensions of 11 x 7.5 mm, the units suit model bodies and rear sections where lighting needs to stay visually balanced instead of overpowering the build. The PCB layout combines 3 light functions in each taillight: rear light, indicator and brake light. That function mix supports more lifelike signalling on trucks, trailers and custom conversions, while the round housing shape fits classic rear-end styling on many commercial vehicle projects. The set is designed for an input voltage of 7.2-12 V DC, making it suitable for RC electrical systems within that range. For model-building enthusiasts, this adds a focused electronics upgrade that contributes visible function as well as scale character. Installed on a 1:14 rig, the taillights help complete the rear view during workshop builds, restoration-style projects or detailed road-going truck scenes. The set is not compatible with TAMIYA MFC-01/03, so it is best matched with other suitable lighting layouts and custom electronics setups.
Models & trailers
1:14 3Axle Trailer Chassis Ver.III, trailer
500907730€389.99
The 1:14 3Axle Trailer Chassis Ver.III captures the look of a heavy road trailer in a format shaped for model-building enthusiasts. Its laser-cut steel construction uses 3 mm and 1 mm sections, creating a rigid base chassis that suits custom builds and gives larger trailer bodies a defined structural foundation. The 3-axle layout brings the long proportions of a transport trailer into a scale setup that looks convincing behind a truck tractor. A new trailer suspension system is part of the chassis design, and the included +8 mm elevation option allows the running height to be adapted to the planned structure above. Wide chromed wheels with ball bearings and wide tyres underline the technical look while supporting smooth rolling movement. At the rear, an aluminium bumper with 7-section taillights adds another recognisable truck detail. The steel spare wheel holder with spare wheel extends the workshop-style equipment, while the semi-circular mudguards shape the wheel area with a clean trailer silhouette. As a basic trailer chassis for individual structures, this version leaves room for flatbed, transport or specialist body concepts built around the frame. On a shelf, in a workshop setting or coupled to a matching 1:14 tractor unit, the long red chassis and detailed under-run protection create a strong heavy-haul presence.
RC truck accessories
1:14 4-in-1 LED Distrib.Board, model accessory
500907805€9.99
Lighting details often define the final character of a scale build, and this 1:14 4-in-1 LED Distrib.Board is made to bring order to that stage of the setup. With 10 outputs on one board, it creates a central connection point for several LED positions within a 1:14 model and supports a tidier internal layout than separate loose branches. The board is designed as a model accessory in the Carson Modelsport range and focuses on the practical side of adding electronics to a build. Its 4-in-1 distribution concept helps separate and organise multiple light connections when a cab, body or chassis carries more than one lighting point. That makes it useful for projects where front, rear or additional marker lights need a defined place in the wiring plan. The compact board format also suits hobby work where available installation space inside a scale model is limited and every connection needs a clear route. In workshop use, the board fits naturally into the finishing phase of a 1:14 build or an upgrade of an existing model. Minimum age 14 years is stated for this accessory, matching hobby projects that combine scale detailing with electronic equipment.
Basic accessories
1:14 4-section Trailer Taillight, model accessory
500907262€15.99
A 4-section taillight layout is a small detail with a strong effect on the look of a scale trailer, and this 1:14 set focuses exactly on that rear-end finish. The set is built around 2 taillight units and matching coloured inserts, giving model builders a clear route to a more defined lighting arrangement on compatible trailer projects. The parts shown for this accessory include red, orange and clear lens elements, allowing the different sections of the taillight to be represented with the right colour separation instead of a single uniform piece. The rectangular format and segmented front face suit the visual language commonly used on trailer rear assemblies in scale form. Because the set is dedicated to 1:14 use, it fits naturally into model scenes where proportions matter and small exterior details shape the overall impression. Age marking: 14 Years. On workshop builds, restoration tasks or visual upgrades, these taillights can be used to refresh an older trailer body or complete a new rear frame with a more convincing scale finish. They also suit hobby benches where body details, marker layouts and rear-end styling are handled with the same care as the main chassis and running gear.
Basic accessories
1:14 Air Horn-Set MB Actros, model accessory
500907161€39.99
Air horns are a defining detail on many show trucks, and this 1:14 Air Horn-Set MB Actros brings that familiar look to a scale build with 2 trumpet-style horn units in chrome brass. The long tubes, flared bell openings and compact bracket mounts create a clean visual match for truck-focused detailing work. Each horn is shaped as a separate component, making the set suitable for adding roof-mounted or exterior trim accents to an MB Actros model in 1:14 scale. The chrome brass finish gives the parts a reflective metallic appearance that stands out against painted cab surfaces and other exterior fittings. Visible screw-mounted brackets beneath the horns provide defined attachment points, which helps keep placement precise during a custom build or restoration project. As a model accessory rather than a complete vehicle, the set focuses on visual realism through scale-correct form and material presence. On a shelf display, in a workshop scene or as part of a truck conversion, the horn pair adds a recognisable finishing touch to the upper bodywork. The set also suits replacement use when an existing build needs fresh exterior detailing for a more complete Actros look.
Basic accessories
1:14 Air Horn-Set, model accessory, brass
500907096€29.49
Air horns are a defining visual cue on classic truck builds, and this 1:14 Air Horn-Set adds that detail with 2 clarions in different lengths. The set uses brass with a nickel-plated finish, creating a bright metallic look that suits scale cabs, roof bars and custom bodywork. The combination of 1 long and 1 short clarion opens up more authentic detailing than a matched pair alone, especially on builds that follow full-size truck styling. Brass gives the parts a precise formed shape, while the nickel-plated surface adds the chrome-style appearance often used for exterior trim. Mounting parts are included for fitting, and the drill template provides a practical guide for positioning the holes before installation. That makes the set useful both for fresh projects and for upgrading an existing 1:14 truck with a more finished exterior layout. On a shelf, the horn set sharpens the silhouette of the cab with a recognisable heavy-truck detail. In a workshop build, it adds a focused finishing step that complements paint, lighting and other scale accessories without changing the base character of the model.
Basic accessories
1:14 Air Suspension Bellow, spare part, hard
500907358€6.99
In 1:14 scale model work, the smallest suspension parts often decide how cleanly a repair or rebuild comes together. This Air Suspension Bellow set provides 2 hard bellows with dimensions of 20 x 18 mm for model applications that call for this exact format. The stated hard specification makes this pair suitable where a firmer component is needed within the suspension area, while the 20 x 18 mm size gives a concrete reference for fit planning before installation. As a dedicated spare part rather than a general accessory, the set is aimed at targeted maintenance, replacement work and parts matching in existing 1:14 model assemblies. The 2-piece format also supports jobs that require a matched pair instead of a single replacement. Whether the task is restoring a used chassis, replacing worn suspension elements or keeping key workshop spares on hand for future service, this set stays focused on one clearly defined function. For model-building enthusiasts, that kind of exact component choice helps keep repair work organised and scale-specific.
Basic accessories
1:14 Air-suspen. bellow, model accessory
500907357€6.99
Air suspension details play a defining role in the look of a scale truck chassis, and this 1:14 air-suspen. bellow set adds that compact technical touch with 2 soft bellows sized at 20 x 18 mm. The pair is suited to model-building work where suspension areas need a matching replacement part or a scale-focused finishing element. The soft construction supports fitting on compatible assemblies where a more flexible part is required. With 2 matching bellows in the set, the format works well for axle or chassis detailing on 1:14 builds that use air suspension styling cues. The stated 20 x 18 mm size gives a concrete reference when comparing existing installed parts or planning a new layout around available mounting space. As a model supplies component, the set fits naturally into repair work, parts organisation and custom project preparation without taking up much room in the workshop. On an in-progress truck build, the bellows can be used to refine visible chassis sections with a more technical scale appearance. For maintenance or replacement work, the pair offers a straightforward way to swap worn compatible parts while keeping dimensions aligned with the rest of the assembly.
Basic accessories
1:14 Alum. 2-Speed Transfer-gearbox, gearbox
500907266€249.99
A 2-speed transfer gearbox is one of the defining mechanical elements in a scale truck drivetrain, and this 1:14 version brings that function into a compact aluminium assembly. The silver housing, black output couplers and visible hex fasteners create a technical look that fits naturally into detailed workshop-style builds. The gearbox uses a central housing with mounting flanges for installation into a matching chassis, while the shaft outputs connect rotational force onward through the drivetrain. The product data also identifies an automatic diff lock and self-locking function, adding a distinct mechanical characteristic to the unit. Separate hardware is supplied for fitting, including screws, a hex nut and coupling parts shown alongside the main assembly. An optional servo mount for 2-speed transfer gearbox is referenced in the documentation, indicating compatibility with a shifting setup where the wider build calls for it. In a 1:14 model project, this assembly suits builders working on scale commercial vehicles or other detailed RC driveline layouts. It works as a focused upgrade or replacement component where the drivetrain needs a dedicated transfer stage with compact metal construction and clearly defined mounting points.
Basic accessories
1:14 Alum. Cylinder mount GH, model part
500907476€46.99
This 1:14 aluminium cylinder mount GH set brings machined metal hardware into detailed model work with a compact 2-piece mounting solution for compatible assemblies. The silver finish and precisely cut shapes give the parts a technical look that fits naturally into workshop-style rebuilds, upgrades and maintenance on scale vehicles. Each mount is formed as a fork-style bracket with several circular mounting holes, creating different attachment positions within the assembly. That layout supports careful placement of pins, pivots or linked components where alignment matters. The set is intended for model supplies use rather than as a standalone vehicle component, making it a practical choice when an existing build calls for replacement hardware or a metal alternative to standard fittings. The aluminium construction adds a crisp machined appearance, while the GH designation keeps the part identifiable within a parts-based setup. On the bench, the set suits hobby tasks such as refreshing worn mounting points, adapting a custom mechanical layout or preparing a scale model for further detailing. Age marking: 14 Years. Batteries are not included. Warning! Not suitable for children under 14 years.
Tyres & rims
1:14 Alum. Fr. wide wheel, wheel rims
500907412€74.99
These 1:14 aluminium front wide wheel rims are built for model-building enthusiasts who want a more defined wheel setup on compatible RC vehicles. The 2-piece set uses a hex mount and is intended for the front axle, combining a technical fit with a machined metal look that suits detailed scale builds. The rim design shown here pairs a silver finish with oval ventilation-style cutouts, a black centre section and visible bolt detailing around the hub area. That combination gives the wheel face a purposeful appearance often sought for truck, crawler or workshop-style conversions. As replacement or upgrade parts, the rims can refresh a worn front end or shift the visual character of a build toward a more mechanical, scale-focused look. The 1:14 scale keeps the proportions in line with matching model platforms, while the wide format changes the visual presence at the front axle. On the bench, these rims suit rebuilds, parts swaps and detail-led custom projects where the wheel design matters as much as the body style. Age marking: 14 Years. No batteries required.
Tyres & rims
1:14 Alum. Low Loader, wheel set, twin-wheel
500907136€50.99
Low loader trailers rely on their wheel setup for much of their character, and this 1:14 aluminium twin-wheel set brings that scale detail into focus with a distinctly technical look. The machined metal rims, grooved outer profile and separate hub caps create the kind of hardware-led finish that suits detailed trailer builds and replacement work alike. Each rim shows a deep recessed centre with circular bolt holes, giving the assembly a realistic mounting pattern and a purposeful visual depth. The twin-wheel configuration is shaped for low loader applications, where paired wheels are part of the recognisable trailer layout. The silver metal finish and grey centre caps create a clear contrast across the wheel face, so the hub area stands out cleanly once fitted. With 2 hub caps included, the set provides the centre-cover detail needed for a more complete axle appearance. In workshop use, the set suits fresh trailer projects, visual upgrades, or replacing worn wheel hardware on compatible 1:14 models. Age marking: 14 Years. The compact component format also makes it a practical choice when a build calls for scale-correct wheel detailing without changing the overall trailer concept.
Basic accessories
1:14 Alum. Ramp hinge GH, model spare part
500907475€30.99
In 1:14 scale builds, small hardware parts shape how moving sections sit and operate. The Alum. Ramp hinge GH supplies a compact metal hinge component for model assemblies that need a clean, defined pivot point on a ramp, flap or linked section. The part uses a long flat bar layout with 2 countersunk outer holes for screw mounting and a central double-lug section with circular through-holes for the mechanical connection. That geometry supports a flush fit at the mounting surface while leaving space for a pin, bolt or axle through the lower tabs. The silver aluminium construction and machined finish give the component a technical appearance that suits exposed installation on detailed truck or trailer builds. With 2 pieces included, matching left and right mounting positions or a direct replacement pair can be equipped in one pack. This spare part fits hobby work where worn hardware needs replacement or a custom model section calls for a compact hinge layout. On workshop benches and during rebuilds, the defined hole positions and simple bracket form support accurate integration into compatible 1:14 model projects. Warning! Not suitable for children under 14 years.
Tyres & rims
1:14 Alum. Rear wheel, model accessory, hex
500907352€114.99
A 1:14 scale wheel upgrade changes the whole stance of a model, and this aluminium rear wheel set brings that effect straight to the axle area with a bright metal finish and a distinctly technical look. The long-hole design and hex layout give custom truck or trailer projects a more defined rear wheel section with visible machined detail. The set is built around 2 rear wheels and is intended as a model accessory rather than a complete vehicle. The aluminium construction adds a solid metal appearance that suits workshop builds, display-focused projects, and scale conversions where the wheel area needs more visual depth. The rear wheel format concentrates the detailing where twin or dedicated rear axle setups draw the eye most strongly. The shaped openings create a purposeful rim face, while the separate hex components support installation on compatible model axles. Age marking: 14 Years. On a shelf, in a diorama, or as part of an RC truck rebuild, these wheel parts shift the look from standard running gear toward a more customised scale finish. They also suit enthusiasts refining an existing 1:14 chassis with more prominent metal wheel detail at the rear.
Basic accessories
1:14 Alum. Trailer Bumper Rear, trailer part
500907361€24.99
A rear bumper is one of the details that gives a scale trailer its finished outline, and this 1:14 aluminium version brings that technical look to the back end of the model. The set is designed as a trailer accessory and uses 2 metal components with a long, straight form for a clean, purposeful rear section. The assembly combines a flat mounting plate with a shaped channel piece, creating a structured layout rather than a single strip. Several pre-drilled fixing points are worked into the aluminium parts, including round holes and elongated slots. That hole pattern supports aligned mounting and leaves room for positional adjustment during fitting. The silver-coloured metal surface suits workshop-style trailer builds and blends naturally with other scale hardware on 1:14 assemblies. In a detailed truck and trailer project, the rear section often defines the final visual impression as strongly as the side rails or chassis details. This accessory fits that stage of the build with a compact, model-focused part that adds a crisp mechanical finish to the trailer end. The 14 Years age marking is stated in the product data.
Basic accessories
1:14 Alum. Trailer Coupling SAF, model accessory
500907155€99.99
Commercial trailers rely on a secure fifth-wheel connection, and this 1:14 Alum. Trailer Coupling SAF brings that characteristic detail into a truck model with a compact metal assembly and a distinctly technical layout. The aluminium construction, twin mounting rails and central coupling section create the look of a working rear chassis area that stands out on a workshop bench or in a finished road-haulage display. The assembly is shaped for installation on a compatible 1:14 model frame, with elongated mounting sections and fixing holes that support careful positioning within the chassis. Black contact pads on the upper section add visual contrast to the silver metal finish, while the central locking area gives the part the appearance of a realistic trailer interface. In detailed truck projects, components like the coupling help define the character of the rear platform, especially when the frame, mudguards and running gear are already in place. The SAF styling adds a recognisable commercial-vehicle reference without overwhelming the rest of the build. On a shelf, in a diorama or as part of a working truck conversion, the coupling adds a focused scale detail that strengthens the overall impression of the model. Age 14 Years. For model-building enthusiasts, it brings an authentic truck element into the chassis and supports a more complete heavy-haul scene.
Basic accessories
1:14 Alum. Transfer-gearbox Tipper 6x6, gearbox
500907610€169.99
A 6x6 truck layout depends on a drivetrain that can pass power cleanly through more than one axle line, and this 1:14 Alum. Transfer-gearbox Tipper 6x6 is built around exactly that task. The aluminium construction and transfer-gearbox format place it firmly in the technical side of scale model building, where mechanical function shapes the whole vehicle concept. The unit is intended for 1:14 scale use and belongs to the models supplies category, making it a focused choice for builders working on truck driveline systems rather than body accessories or decorative parts. Its transfer-gearbox design indicates a central role between the incoming drive and the connected axle shafts. The compact casing combines a formed housing with mounting points for installation into a chassis layout. The visible shaft connections support integration with rotating driveline parts in a multi-axle configuration. In workshop use, this component fits projects that need a replacement gearbox, a custom 6x6 conversion, or a more detailed truck transmission layout. Age 14 Years. It suits hobby builds where the mechanical structure remains visible in the planning stage and where each drivetrain part contributes to a realistic scale engineering setup.
Basic accessories
1:14 Alum. Underrun Protection, truck accessory
500907181€34.49
On full-size trucks, underrun protection is part of the functional rear structure, and in 1:14 scale it adds the same purposeful finish to a detailed model. This aluminium underrun protection is made for 1:14 truck projects and brings a clear commercial-vehicle character to the rear section. The assembly combines a long metal crossbar with 2 angled bracket sections, creating a defined structural part rather than a loose collection of fittings. The mirrored bracket plates feature several drilled holes for fastening, which supports accurate positioning during installation on a compatible model. The aluminium construction gives the part a crisp technical appearance that suits scale truck builds with exposed chassis details and visible rear equipment. As a dedicated accessory in the Models & Accessories range, it also fits naturally into restoration work where worn or missing rear hardware needs replacement. In workshop-style build sessions, the part can be used to refine a custom truck layout or restore a model to a more complete rear-end setup. It also adds a more convincing finish in display settings where the frame, rear cross area and underbody details remain visible from low viewing angles.
Tyres & rims
1:14 Aluminium Front Wheel Hubs, Model Part
500907278€74.99
Built for 1:14 model applications, these aluminium front wheel hubs bring a focused replacement part into the running gear where fit and connection matter most. The set contains 2 round hubs with a hex design, intended for the front wheel area and shaped for wide wheel layouts. The aluminium construction gives this component a clear mechanical role within the axle assembly, while the round hub form and hex interface define how the wheel mount connects into the drivetrain area. As a pair, the hubs suit maintenance work when existing parts show wear or when a front axle setup is being refreshed with matching replacement components. The wide wheel specification points to a broader hub profile, which matters where the chassis layout depends on the correct wheel seating and axle geometry. In workshop use, these hubs fit naturally into repair benches, parts boxes and ongoing rebuild projects for 1:14 vehicles. They also suit routine servicing where the front axle hardware needs a like-for-like exchange rather than a general universal part.
Basic accessories
1:14 Aluminum Warning Sign, model accessory
500907448€29.99
High-visibility warning panels are a familiar sight on transport and service vehicles, and this 1:14 accessory brings that look into model form with a compact aluminum warning sign and matching striped decal. The red and white diagonal marking gives scale builds a recognisable rear detail that fits utility, haulage, and work-focused scenes. The aluminum parts shown for the set include 2 mirrored mounting brackets, each with a long slotted arm and a plate section for fastening. That slot shape allows the position to be adjusted during fitting, which helps when lining the sign up with bodywork or another mounting point on the model. The decal carries the classic diagonal stripe pattern used for warning visibility, adding a crisp graphic finish once applied. Together, the metal brackets and decal create a small but distinctive scale detail that changes the character of a build from plain bodywork to a more purpose-led vehicle setup. On a shelf, in a workshop scene, or as part of a running model with service-vehicle styling, the sign adds a clear finishing touch without dominating the rest of the build. The 1:14 scale keeps it in proportion for matching model projects, and the separate bracket pieces support a neat left and right installation layout.
Electronics
1:14 Angle Eyes Hella, model lights, white
500907574€52.99
Auxiliary lamps are a small detail with a big effect on a scale truck, and this 1:14 Angle Eyes Hella set brings that workshop-style finishing touch in a compact 2-piece format. The round lamps combine a white light look with chrome-look housings and separate mounting brackets, creating a front-end accent that fits naturally into detailed vehicle builds. The set is specified for 7.2 V and 12 V systems, with long black cables attached to each lamp for wired installation. That layout supports clean routing through the body or chassis area and leaves room for custom placement where the lighting concept of the model needs it. The round shape, reflective finish and bracketed base suit classic auxiliary-light positions such as bumpers, roof sections or other scale mounting points supported by the build. As a matched pair, the lamps help maintain a consistent left and right layout instead of mixing different light styles across the vehicle. In a workshop build, show truck project or detailed shelf model, these lamps add a recognisable Hella-style visual cue without changing the overall character of the vehicle. The 1:14 scale focus keeps the proportions aligned with larger truck models, while the wired format gives hobbyists scope to integrate lighting as part of a more individual setup.
Electronics
1:14 Angle Eyes LED PCB, model accessory
500907555€34.49
Angle Eyes lighting is a familiar styling cue in full-size vehicle culture, and this 1:14 LED set translates that look into a compact model-building format. The white SMD LED PCB is designed for 7.2 V and 12 V systems and brings a defined illuminated ring effect to compatible scale vehicle front ends. The set is built around compact light modules, fine connection cables and mounting parts shown in the included contents. That layout supports installation in tight body sections where larger lighting components would take up too much space. In a 1:14 build, the small-format PCB helps add lighting detail without overwhelming the proportions of the model. The white LED output suits headlamp styling with a clear, technical look, while the wiring layout supports connection into an existing compatible electrical setup. Mounted behind the front light area, the LEDs add a more defined visual signature when the model is on display, on a shelf, or integrated into a running vehicle project. Age marking: 14 years and up. A compatible model and a suitable power connection are required separately.
Electronics
1:14 Angle Eyes, LED set, blue SMD PCB
500907554€34.49
Blue Angle Eyes lighting brings a sharper custom look to 1:14 scale vehicle builds, with SMD LED PCB technology designed for operation on 7.2 V or 12 V systems. The set is aimed at model-building enthusiasts who want to add a clear lighting accent to a compatible project and extend the visual detail of the front end beyond the standard body finish. The compact electronic layout suits installations where space is limited around the body shell or light area, and the wired modules support placement within a scale build without dominating the visible structure. Blue illumination creates a defined styling effect that stands out in workshop displays, shelf presentation, or running sessions under lower ambient light. As a dedicated accessory from the models and accessories range, the set fits naturally into hobby projects that combine body detailing, electronics, and scale-focused finishing work. Age 14 Years. In a truck or other 1:14 model project, the lighting can be used to refine a custom road setup, add a more technical visual signature, or support a display-focused build with extra electronic detail. The set also works well for enthusiasts planning a fresh rebuild or updating an existing compatible model with a new lighting element.
Electronics
1:14 Angle Eyes, model light set, 7.2/12V
500907573€52.99
Angle Eyes lighting brings a sharper front-end signature to 1:14 model builds, with 2 round lamps designed for 7.2 V and 12 V operation. The white light effect suits scale truck projects that need a clear visual accent at the front, while the Hella-style form gives the setup a recognisable workshop and road-going look. Each lamp is connected by cable, which supports custom installation on bumpers, roof bars or other mounting points where extra lighting detail is wanted. The round housings keep the appearance consistent across both sides of the model, and the 2-piece format helps create a balanced layout rather than a single offset light source. On display shelves, in workshop scenes or during driving sessions, the lighting set adds a more technical finish to the bodywork without changing the core character of the build. The set suits hobby projects for ages 14 years and up and works well where scale detailing matters as much as driving action. Whether fitted to a road truck, a show build or a custom conversion, these lamps add a compact lighting element that strengthens the model's presence through shape, wiring and light effect.
Electronics
1:14 Angle Eyes, model lights, blue Hella
500907572€52.99
Blue Angle Eyes bring a distinctive Hella-style lighting look to 1:14 model vehicles, combining round lamp bodies, chrome-look housings and blue accents in a compact 2-piece set. Designed for 7.2 V and 12 V systems, the wired layout supports installation on compatible builds where added front lighting is part of the visual setup. Each lamp is fitted with a mounting bracket and attached cable, giving the set the hardware needed for fixed placement on the model. The round format suits classic auxiliary-light styling, while the reflective housing adds a crisp technical finish that stands out on truck fronts, bumpers or roof bars where scale detailing matters. With 2 matching lamps in the set, the lighting arrangement stays visually balanced across the vehicle. On workshop-style custom builds, the pair adds a clear styling accent before the model heads onto the shelf or into driving sessions. On detailed road trucks and show builds, the blue Angle Eyes effect works as a focused visual upgrade that strengthens the scale character of the finished vehicle.
Basic accessories
1:14 Arocs Cab Locking Device, model accessory
500907590€37.49
Truck models in 1:14 scale gain extra workshop character with this aluminium Arocs Cab locking device. The component is designed as a dedicated model accessory and adds a defined locking element to the cab area, giving scale truck builds a more technical rear-chassis appearance. Its aluminium construction brings a crisp metal finish that stands out against painted body sections and darker chassis parts. In detailed truck assemblies, a visible locking mechanism helps the cab section read more like a working vehicle layout rather than a simplified shell. The Arocs designation keeps the part tied to a specific model theme, while the compact accessory format leaves room for individual build planning and custom installation choices within a 1:14 setup. As a model supplies part within the Carson range, it fits naturally into projects that focus on realistic hardware details rather than broad cosmetic changes. On a shelf, in a workshop-style display, or as part of an active truck build, this cab locking device adds a small but noticeable engineering accent. The 14+ age marking places it within hobby-oriented model projects where scale detail and component choice shape the finished result.
Electronics
1:14 Arocs Headlight, LED PCB, model accessory
500907596€70.99
The Mercedes-Benz Arocs is known on full-size roads and construction routes for its strong, purposeful front-end design, and that character carries neatly into this 1:14 lighting upgrade. The 1:14 7.2 V LED-PCB Arocs Headlight set adds a model-specific light arrangement with 2 mirrored electronic modules shaped for the left and right sides. Each module uses a compact PCB with visible mounting points, integrated light positions and attached wiring, creating a structured solution for fitting illumination into the front section of a compatible Arocs model. In addition to the main board-mounted LEDs, each side includes a separate wired LED element, expanding the lighting layout beyond a single light point. The mirrored construction helps keep the installation aligned with the vehicle's front geometry rather than relying on a universal board shape. The 7.2 V specification matches common model truck electrical setups and gives hobby builders a clear voltage reference for planning the installation. On a workshop bench, the paired boards suit careful detailing work around the cab front and headlight area. Once fitted, the left and right arrangement supports a more complete scale appearance for display, diorama scenes or running sessions with a compatible 1:14 truck model.
Basic accessories
1:14 Arocs Mainplate Batt Hold, model accessory
500907591€69.99
This 1:14 Arocs accessory brings 2 central chassis elements together in one aluminium set: a mainplate and a battery holder shaped for scale truck building work. In a model workshop setting, that combination supports a tidy foundation for rebuilds, replacements and ongoing project maintenance around the battery area. The designation names the Arocs platform and the 1:14 scale directly, making this part relevant for scale truck assemblies that need a matching structural component rather than a generic hardware substitute. Aluminium gives the set a metal construction that suits technical model layouts where the mainplate forms part of the core structure and the battery holder sits as a dedicated support element. As a model accessory within the Models & Accessories and Models Supplies range, it fits naturally into repair stock, upgrade planning and parts-led rebuild work. On the bench, this set suits damaged-part replacement, fresh chassis builds and detailed restoration tasks where a correct main section and battery mount are needed together. The 14 years and up marking places it in the hobby segment, where scale truck enthusiasts often work through fitting, alignment and component changes as part of the build process.
Electronics
1:14 Arocs Tip LED-PCB Taillight, model accessory
500907616€40.99
The Mercedes-Benz Arocs is a familiar sight in modern construction transport, and this 1:14 LED-PCB taillight set brings that working-truck character into a scale model with functional rear lighting. Designed as an Arocs Tip taillight accessory, the set includes 2 PCB units arranged as a left and right pair for a balanced rear-end layout. Each board works within an operating voltage range of 7.2 V to 12 V, which suits compatible model truck electrical systems used in hobby builds and upgrades. The lighting functions cover indicator left-right, driving light, brake light and reversing light, so the rear section can reflect several typical road-going signals through dedicated light points. The black carrier plates provide a compact base for the light elements, while the attached wiring looms are already fixed to each unit for connection into the model's electronics. Age 14 Years. Installed on a 1:14 tipper truck, the pair adds technical detail that stands out both on the workbench and during driving sessions. The mirrored arrangement suits rear body mounting on opposite sides, helping the finished model present a more complete truck look in motion and at rest.
Basic accessories
1:14 Auxiliary Head Lamp, accessory, 5 mm mount
500907052€15.79
Auxiliary lamps are a classic detail on working trucks and construction machines, where extra lighting shapes the vehicle's character as much as its function. This 1:14 accessory set brings that look into scale form with 2 round auxiliary head lamps designed for model customising. Each lamp is built for mounting on a lamp frame and uses a 5 mm mount, giving the set a clear fitting reference for compatible scale projects. The round form and chrome-finished housing create a bright metallic contrast that reads cleanly against painted bodywork, bars and front assemblies. Alongside the 2 lamps, the set provides 2 blue and 2 white glasses, so the final appearance can be matched to the chosen build theme or visual setup. The paired layout also supports symmetrical placement across a front bar or roof-mounted frame. In workshop-style truck builds, construction models or other 1:14 vehicle projects, the set adds a compact styling detail that helps complete the front section with a more purposeful scale look. The parts suit hobbyists who refine body details, update lamp frames or add visual accents during a custom build.
Basic accessories
1:14 Auxiliary Head Lamp, model accessory
500907575€14.99
Auxiliary lamps are a small detail with a strong visual effect, and this 1:14 scale set brings that effect to model trucks and other compatible vehicle builds. The set contains 2 auxiliary head lamps with a 4 mm mount, giving hobbyists a compact lighting detail for front-end customisation on scale projects marked 14 Years and up. The round housings and clear lenses create the look of classic add-on driving lamps, making them a natural match for bumpers, roof bars, or other exposed mounting points where extra front detail matters. The 4 mm mount gives a defined fixing size for planning placement on a build or replacing existing lamps on a model already in use. As a dedicated accessory in the Models & Accessories range, this set focuses on exterior detailing rather than a full conversion, which keeps the upgrade targeted and easy to integrate into an existing 1:14 project. On display models, the pair helps complete the front view with symmetrical lamp placement and a more purposeful scale appearance. On working builds, the compact format suits hobbyists refining a truck, service vehicle, or custom body with period-style auxiliary equipment.
Basic accessories
1:14 Ceresit CM90 Easy Pallet, scale model
500907617€21.99
This 1:14 scale pallet with Ceresit CM90 Easy brings the look of transport-ready building supplies into model scenes with a clearly branded cargo format and a compact freight presence. The stacked load and wrapped finish create the visual image of a delivery that has just reached a depot, warehouse bay or construction site. The miniature load is based on a EUR pallet format and carries repeated Ceresit CM90 markings across the visible faces, which helps the accessory read clearly from different viewing angles. Transparent wrap around the stacked boxes gives the cargo a secured storage and handling appearance rather than a loose display stack. That distinction matters in dioramas built around logistics, site supply or commercial transport, where the state of the load shapes the whole scene. The pallet form also pairs naturally with 1:14 trucks, trailers, forklifts and loading zones in model layouts. Placed beside a loading ramp, inside a warehouse setting or on the bed of a scale transport vehicle, the pallet adds a specific construction-material reference instead of a generic cargo block. The compact format suits static displays as well as scene building, where a single freight unit can sharpen the industrial character of the overall layout. The 14 Years age marking identifies it as a hobby accessory for model-focused setups.
RC truck accessories
1:14 Chrome Bumper MB 1838/1850, truck part
500013511€12.49
Classic truck styling often comes down to the front details, and this 1:14 Chrome Bumper MB 1838/1850 adds a bright plated accent to compatible model builds. Designed as an accessory for Mercedes Benz truck models 56305 and 56307 from Tamiya, it brings the specified MB 1838/1850 look to the front section in a format matched to 1:14 scale projects. The bumper is made from chromed material and focuses on exterior appearance rather than a generic replacement look. Its shaped front profile and integrated mounting points are intended for the named compatible truck models, which keeps the fitment use clearly defined in the product data. The included fixing hardware consists of 2 black screws, giving the set the essential parts needed for installation. As a model accessory in the Models Supplies range, it suits detail-focused truck projects where the front end finish plays a visible role in the overall build. On a workshop bench, the plated surface adds contrast against painted cab parts and darker chassis components. In a display setting or as part of an active RC truck build, the bumper helps complete the characteristic road-truck appearance associated with the MB 1838/1850 designation.
RC truck accessories
1:14 Clearance Lights, model accessory, 2pcs
500907806€11.49
Marker lights are a small detail with a strong effect on the finished look of a scale vehicle, and this 1:14 clearance light set brings that effect into model builds with a red and white 2-piece layout. The compact format suits focused detailing work on truck and trailer bodies where visible light points help define the lines of the model. The set is listed as a model accessory and is aimed at hobbyists from 14 years. Red and white light elements open up classic placement options on body edges, upper sections or rearward areas, depending on the build concept and the styling of the vehicle. Because the pack contains 2 pieces, the set works well for selective upgrades rather than broad full-body outfitting. That makes it a useful choice for custom projects, replacement work or finishing touches on a scale body that still needs clearly placed marker-light details. On the workbench, the accessory can be integrated into truck, trailer or other 1:14 modelling projects where small exterior parts shape the overall impression. In display use or during driving sessions, the added light housings help the bodywork read with more scale definition and a more complete road-going look.
Basic accessories
1:14 Control platform, accessory
500907365€63.99
The 1:14 Control platform adds a functional industrial element to compatible model vehicle and construction layouts. Guard rails run around all sides of the rectangular deck, while a small front ladder defines the access point and gives the platform the look of a real working attachment. Across the floor, evenly spaced round holes create a perforated deck pattern that sharpens the technical character of the platform. Upright corner posts and horizontal rails shape a clearly enclosed standing area, while the underside carries triangular support brackets and circular cutouts that bring extra depth to the construction. The metallic silver finish underlines the workshop and site-equipment style, so the platform holds its visual presence both mounted on a model and placed within a display scene. In construction, maintenance or service-themed arrangements, the platform expands the range of realistic setup options around 1:14 vehicles and machinery. It also adds convincing structure for close viewing, where the ladder, rail geometry and underbody detailing become part of the overall scale impression.
RC truck accessories
1:14 Day Running Light Actros 2/3 Axle
500907677€65.99
The MB Actros remains one of the defining shapes in modern long-haul trucking, and this 1:14 daytime running light set brings that road-going character into a scale build with a model-specific front lighting detail. Made for MB Actros 2/3 Axle models, the set focuses on the visual signature at the front end and adds a cleaner, more technical look to the truck body. The accessory is designed as a paired lighting set with wired left and right units, matching the mirrored layout needed for the vehicle front. Its 7.2 to 12 V/DC input range gives clear electrical guidance for integration into compatible RC truck systems. The compact housings are shaped for installation as dedicated light components rather than as generic decoration, which makes the set especially relevant for builders refining the appearance of an existing model or replacing front lighting parts with the correct format. On a workshop bench, during a rebuild, or as part of a scale detailing session, this lighting set adds a focused upgrade to the MB Actros 2/3 Axle platform. It suits display-oriented finishing as well as active RC truck projects where the front-end layout matters as much as the driving setup.
RC truck accessories
1:14 Draw Tube Pole Trailer, model accessory
500907733€89.99
This 1:14 Draw Tube Pole Trailer accessory set brings a functional trailer detail into model-building projects with a long cylindrical draw tube, a rectangular silver housing section and an angled mounting plate with 4 round holes and 2 elongated slots. The layout reads as a dedicated add-on for scale truck or trailer work, with each part focused on mounting, alignment and visible structure rather than decoration alone. Alongside the main tube section, the set includes 2 small silver detail parts, a black bracket and a bag of black and silver screws for the fitting work. The combination of slotted and round mounting points supports careful positioning during assembly, while the separate hardware keeps the installation tied to the mechanical character of the build. A red transparent 2-part light piece and a clear lens frame extend the set beyond the structural section, adding a realistic rear-end detail that complements the metallic-looking components. 14 Years is the stated age marking. On a workshop bench, the parts suit upgrade, replacement or custom trailer projects where a scale-correct extension section matters as much as the finished look. Assembly time is stated in minutes, and batteries are not included.
Basic accessories
1:14 Driven Front Axle, RC truck axle, diff lock
500907267€234.99
Heavy truck drivetrains rely on the front axle to turn steering input into controlled movement, and this 1:14 Driven Front Axle brings that mechanical character into a scale RC truck build. Designed for TAMIYA trucks or vehicles with a 62 mm frame width, the assembly adds a driven front end with auto differential lock and a clearly defined fit reference for compatible chassis. The axle unit combines a central differential housing, steering linkage and wheel-end assemblies in one detailed mechanical module. Instruction data names ball bearings in 5x11x4 mm and 5x9x3 mm sizes, along with washers, pins, O-rings and mounting hardware that support the internal rotating parts and axle-end setup. The documentation also shows configuration options for versions with or without through-drive, allowing the axle layout to match the intended drivetrain arrangement. A front mounting set is referenced for installation, and the ZF mark shown in the assembly material adds a real-world engineering cue to the finished truck. In a workshop-style build, the axle becomes a focal point where steering hardware, drivetrain parts and chassis mounting come together in visible mechanical detail. Once installed beneath a 1:14 truck frame, it suits scale road tractors, construction trucks and other heavy vehicle projects that call for a driven front axle layout.
Basic accessories
1:14 Driver Cab Locking Device, model accessory
500907156€38.99
A driver cab locking device adds a functional mechanical detail to 1:14 scale truck projects, with an aluminium assembly that brings a realistic latch-style action into the model. The compact unit combines a shaped lever arm, angled support frame, pivot hardware and a horizontal tension spring, creating a technical look that suits exposed chassis and cab areas. The mechanism is built around guided movement: the lever arm actuates the linkage, while the spring returns the assembly to its resting position. Machined cutouts in the frame reduce visual bulk and underline the engineered character of the part. Black hex socket screws and multiple mounting points reinforce the workshop-style appearance that model-building enthusiasts often look for in functional upgrades. As a dedicated accessory rather than a decorative add-on, the assembly supports cab sections that need a defined locking or release action within a scale build. In a detailed 1:14 truck workshop scene, the metal linkage adds visible function alongside the bodywork and interior structure. It also suits conversion projects where a plain fixed cab is being reworked with a more mechanical opening and closing setup for display or hobby use.
Models & trailers
1:14 Dump Trailer 2/3 Axle, model kit
500907050€619.99
Built for model truck scenes with real working character, this 1:14 dump trailer model kit brings the look of a construction-site semi-trailer into a detailed three-axle format. The combination of a CNC-milled aluminium chassis, reinforced PVC basin and back wall, and a lightened licence plate mount gives the trailer a technical, workshop-style finish that suits display builds and active driving alike. The running gear uses GFK suspension with horizontal rods, 12 ball-bearings, 6 wide rims and 6 wide tyres with a width of 25 mm and an outer diameter of 82 mm. Air-spring dummies with screw springs add another layer of scale detail to the undercarriage, while plastic fenders with mounts frame the wheel setup cleanly. The aluminium underbody protection and the CNC-milled support construction continue the metal-focused build, and the mechanically adjustable trailer supports add a functional detail at standstill. With a length of 700 mm, width of 185 mm, height of 235 mm and a weight of 4,600 g, the trailer has substantial presence in a 1:14 truck setup. For unloading scenes, the basin can be equipped with a separately available dump mechanism. A spindle drive, motor, battery and switch are required separately. Once fitted, the raised basin and automatic rear locking create a convincing loading and unloading sequence for sand, gravel or stone in construction layouts, quarry scenes or truck meeting displays.
Basic accessories
1:14 Euro-Pallet-Set, model accessory, 4 pieces
500907094€8.99
The Euro pallet is one of the defining elements of modern freight handling, and this 1:14 set brings that familiar format into model scenes with a compact, workshop-ready scale presence. Each pallet is shaped to echo the classic full-size design, adding a recognisable logistics detail to trucks, depots and loading areas. The set contains 4 pallets, each measuring 93 x 62 x 14 mm. The formed structure recreates the look of a wooden Euro pallet while using a moulded construction with a wood-like surface appearance. Open side entry spaces and the slatted top layout reflect the handling pattern associated with the original pallet format, which helps the accessory sit naturally in transport, warehouse or industrial dioramas. The matching dimensions across all 4 pieces also support a consistent scene layout when several loading points are arranged together. Placed on a trailer bed, beside a loading ramp or in a storage area, the pallets add scale reference and visual structure to freight-focused model setups. They also suit construction, farming and workshop scenes where cargo handling details help complete the overall setting. Age marking: 14 years+
Basic accessories
1:14 Euro-Pallet-Set, model accessory, 5 pcs
500907049€7.79
Freight details often define whether a 1:14 transport layout looks staged or convincingly in service. This Euro-Pallet-Set brings that warehouse and loading-yard character into model scenes with 5 beige pallets sized for 1:14 use and shaped in the familiar Euro pallet format. The set is suitable for Tamiya trucks and Carson trailers, making it a straightforward addition to existing transport combinations, depot layouts and cargo displays. The pallet form supports classic loading arrangements on trailer beds, at ramps or in storage areas, and the repeated 5-piece format helps build a more complete freight scene than a single cargo part can achieve. The beige finish gives the pallets a natural, workmanlike appearance that blends well into logistics, warehouse and industrial model settings without overpowering the vehicle itself. Whether arranged as stacked freight, placed individually on a trailer, or used to structure a loading zone, the pallets add scale reference and scene depth to transport models. Age 14 Years. The scope of delivery includes 5 items.
Basic accessories
1:14 Flatbed Underride Guard, accessory, 190 mm
500907078€39.99
Scale truck builds gain a sharper technical finish with this 1:14 flatbed underride guard in aluminium. The 190 mm part is made for model builders who want to extend the rear underbody detail of a trailer with a component that matches the look of metal chassis hardware and flatbed structures. As a dedicated accessory for 1:14 flatbed projects, the guard suits custom builds, visual upgrades and restoration work on existing trailer layouts. The aluminium construction brings a distinct metallic surface that works naturally with silver frame sections, crossmembers and other exposed undercarriage elements often seen on scale transport models. Its narrow, linear form gives the rear section a more defined outline and supports a tidier transition across the underside of the trailer. For hobby workbench planning, the stated 190 mm width provides a clear reference when matching the part to the proportions of a chosen build. The part fits especially well into workshop sessions focused on scale realism, where underbody components matter as much as the deck or side panels. On a finished flatbed model, it adds visible structure to the rear area and strengthens the overall impression of a carefully specified transport trailer.
Models & trailers
1:14 Fliegl Stone Master, tipper trailer
500907216€749.99
Current half-pipe tippers are defined by fast unloading and a hard-working silhouette, and the 1:14 Fliegl Stone Master brings that character into a detailed 3-axle trailer kit. The licensed model combines a steel chassis frame with a steel tipper body and rear wall, creating a substantial build with the long, purposeful proportions of a site trailer. The chassis uses laser-cut and laser-welded 1 mm and 3 mm steel parts, while the tipper and hatch door are formed from 2 mm steel with a CNC-bent profile. Across the running gear, 12 ball bearings sit inside the 6 wheel assemblies for smooth rolling action. The trailer suspension is detailed with air spring dummies, and the rear section carries a 7-section taillight layout, a licence plate bracket and a square steel rear underride guard. Semi-circular mudguards, a king pin, an ABS operating platform and a hydraulic cylinder dummy add further scale detail without crowding the lines of the body. The 7-section rear light cluster can be electrically retrofitted. With dimensions of 700 x 185 x 250 mm and a load figure of up to 10 kg, the trailer has the size and carrying capacity to suit construction layouts, transport scenes and scale hauling setups. The body can be tipped and unloaded with the separately required tipping mechanism. A spindle drive, motor, battery and switch are required separately. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Frame Cover Panels 2-Axle Accessory
500907180€84.99
Frame cover panels bring a more complete scale look to the rear section of a 1:14 truck build. This 2-axle accessory is shaped for the chassis area behind the cab, where the frame, deck and coupling zone meet and remain clearly visible on many model truck layouts. Used in this exposed section, the panels help define the transition between the rear fenders, the fifth-wheel area and the surrounding chassis structure. That makes them a focused upgrade for model-building enthusiasts who want the mechanical layout to read with more visual order in parked display scenes and during driving sessions. The 1:14 scale keeps the detailing aligned with truck builds in this format, while the 2-axle specification keeps the application tied to the correct chassis configuration. The set works especially well on projects where the rear platform and coupling section are part of the visual character of the model. Combined with a tractor unit and trailer setup, the covered frame area supports a more finished appearance around the back end without changing the core layout of the truck. Age 14 years+
Basic accessories
1:14 Frame Cover Panels 3-Axle, model accessory
500907255€92.99
A 3-axle truck chassis gains a more finished scale look with these 1:14 Frame Cover Panels, shaped to dress the rear platform area with a metal checker-plate surface. The silver panel form brings the visual language of full-size truck catwalks into a model build, adding a technical detail that stands out around the fifth-wheel section and mudguard area. The panel is formed as a flat metal part with an irregular stepped outline, multiple round fixing holes and several cut sections that indicate its mounting role within a larger chassis assembly. That layout supports integration into detailed truck projects where the frame area is part of the overall visual impact, not just a structural base. The checker-plate pattern adds texture across the surface, giving the rear section a more authentic workshop and transport-truck character. In display builds, the metallic finish catches light differently from painted cab parts and helps break up large chassis surfaces with a functional, mechanical accent. This accessory suits hobby bench upgrades, custom 3-axle conversions and scale truck projects that focus on realistic rear-deck detailing. Combined with a tractor unit body, wheel arches and coupling area, the panel helps create a more complete heavy-haul look for static presentation or RC truck builds. Suitable for ages 14 years and up.
Basic accessories
1:14 Front Knuckle Arms, model accessory
500530913€37.99
In 1:14 truck building, the front end hardware shapes how the axle assembly comes together. These alloy front knuckle arms are made for Tamiya 1:14 models and supply 2 matched components for the left and right side of the steering layout. Each arm uses a machined metal construction with a silver finish and a mirrored form, so the pair corresponds to both sides of the front assembly. The cross-shaped body carries threaded mounting holes that support screw-based installation, while the protruding axle section provides the mounting point for the wheel hardware. This makes the set relevant both for repair work on worn front end parts and for planned rebuilds where the steering area is being refreshed with metal components. The compact format also suits parts storage in a workshop drawer or field box. During a rebuild, the pair can be fitted as part of a front axle service, or kept ready as replacement hardware for maintenance between driving sessions. The 2-piece set gives model-building enthusiasts a focused chassis component for keeping a 1:14 Tamiya truck ready for the next run.
Tyres & rims
1:14 Fulda Crossforce, off-road tires, 2-pack
500907011€26.49
Loose dirt, uneven ground and rutted tracks call for a tire that can keep a model connected to the surface. The 1:14 Fulda Crossforce off-road tires are built for that role, with a terrain-focused design and flexible pneumatic construction that supports strong traction where hard-packed road rubber reaches its limit. This 2-piece set is intended for 1:14 models and is compatible with original Tamiya rims, so it fits naturally into repair work, rebuilds and running setup changes on matching vehicles. The flexible structure allows the tire to work with the ground rather than skimming across it, which helps the contact patch stay active over irregular terrain. That makes this set a useful choice when a model spends most of its time away from smooth surfaces and needs a tire shape aimed at off-road running rather than general road use. Whether the goal is replacing worn rubber before the next session or preparing a compatible chassis for rougher terrain, this pair adds a focused wheel setup for dirt routes and mixed ground. Age 14+
Tyres & rims
1:14 Fulda EcoControl Tire, truck tyre set
500907014€26.49
The Fulda EcoControl Tire set brings full-size road-haulage character into 1:14 truck modelling with 2 drive-axle tyres shaped after the original Fulda road pattern. Sidewall lettering and the road-style tread give tractor units a more authentic EU look, whether the build is being refreshed or finished from scratch. Each tyre measures 80 mm in outer diameter, 40 mm in inner diameter and 19 mm in width, creating proportions that suit scale truck running gear without guesswork. The 1 mm profile depth keeps the road-tread look crisp and restrained, matching the appearance expected from highway-focused tractor units rather than off-road machinery. As a dedicated drive-axle version, this set is aimed at the rear axle area where matching tyre style has a strong effect on the finished truck's overall stance. Compatibility with all TAMIYA tractor units and TAMYIA and CARSON trailers opens up several workshop uses, from replacing worn tyres to aligning a tractor and trailer combination with the same road-going visual theme. In a parked display, the Fulda markings sharpen the scale impression; on a running model, the tyre dimensions support a clean, realistic look across the axle set.
Tyres & rims
1:14 Fulda Multitonn, tire set, wide 2-pack
500907012€26.49
Heavy road transport styling carries straight into this 1:14 Fulda Multitonn tire set, built as a wide 2-piece replacement for model truck running gear. The flexible rubber construction combines a realistic road pattern with a contact surface shaped for traction and extended running life, giving workshop projects a functional spare for regular use. The set is intended for specific Carson-compatible wheel positions rather than as a universal fit. It suits the front axle rim 907013 and also fits the trailer rim 907026, which makes the pair useful when a truck build needs a direct replacement on the steering axle or a matching change on trailer wheels. The tread uses narrow longitudinal grooves and ribbed sections that visually suit road-going commercial vehicle models while supporting controlled rolling on smooth hobby surfaces. With 2 tires in the pack, the set covers one axle pair and keeps maintenance planning straightforward for larger articulated combinations. In the workshop, the pair suits rebuilds, wear replacement and detail-focused upgrades on 1:14 truck projects. Age marking: 14 years. For hobbyists maintaining a hauler, trailer or display-ready road rig, this set adds a scale-correct running component with defined fitment for compatible rims.
Models & trailers
1:14 Goldhofer TU4, lowloader trailer, 4-axle
500907400€694.99
Heavy-haul lowloaders are built to move machinery that sits too tall or too heavy for a standard trailer, and the Goldhofer TU4 captures that purpose in a long 1:14 scale platform with a distinctly low deck and 4-axle layout. This kit uses laser-cut steel sheet parts to create the frame and structure, giving the model a technical build with the look of a real transport trailer. The deck is finished with wood supports that break up the steel construction with a realistic loading surface, while 16 ball-bearing wheels add a dense multi-axle stance under the chassis. At the rear, the support can be adjusted manually, and the one-piece ramps connect through a hinged mechanism that allows different loading positions. The underframe includes spacers, semicircular fenders and a pivoting bogie arrangement, adding more mechanical detail during assembly than a simple display trailer. Decals are included for markings and finishing touches, so the completed model carries the visual character of a working lowloader rather than a plain platform. Coupled behind a matching 1:14 tractor unit, the trailer suits workshop display, transport dioramas and scale loading scenes with construction or agricultural vehicles. Age 14 Years. Assembly instructions are included. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Goldhofer/SAF Low Loader Axle, trailer axle
500907140€76.99
Heavy haul trailers depend on a convincing undercarriage, and this 1:14 Low Loader Axle Goldhofer/SAF brings that technical character into a scale build. The set is designed as a model assembly for trailer projects and centres on the axle and suspension area that defines the stance and mechanical look of a low loader. The layout shown in the set includes a straight axle, suspension bellows, trailing arms and multiple mounting parts that shape the underbody structure in a way that reads clearly on a finished model. Silver-toned metal elements sit alongside black moulded components, creating the visual contrast typical of working trailer hardware. Additional brackets, clamps, bushings and threaded pins expand the assembly beyond a single cross member and give the build more depth around the wheel and mounting zone. The included fasteners support a clean mechanical fit and suit hobby work that values visible construction detail. On a completed 1:14 transport trailer, the axle section adds substance to workshop scenes, display setups and road-going truck combinations. Age 14 Years. The set also suits enthusiasts who want to refine a trailer project with a component group that is usually seen close up, where suspension parts and mounting geometry make a clear difference to the final impression.
Basic accessories
1:14 John, driver figure, painted model
500907426€24.99
A seated driver figure can change the whole impression of a scale scene, and John brings that effect into 1:14 layouts with a painted finish and a relaxed, ready-to-place pose. Bent arms, open hands and a natural seated posture give the figure a convincing presence in cabins, workshop corners or diorama settings where an empty seat would otherwise break the illusion. The 1:14 scale makes John a useful addition for model builders working on trucks, construction vehicles or display scenes that need a human reference point. The blue long-sleeve work shirt with light cuffs, dark trousers and black shoes create a practical everyday look rather than a costume-like appearance, which helps the figure sit comfortably across many different scene styles. Short black hair and a neutral facial expression keep the character flexible for varied settings. The painted surface also saves finishing work and allows the figure to move straight into a build or display. Placed in a cab, on a bench or beside a workshop setup, John helps a model scene feel inhabited and proportionally grounded. For enthusiasts refining a vehicle interior or building a full diorama, this figure adds a clear visual link between machine, setting and scale. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 King Pin Steel, model accessory, Tamiya
500907362€7.99
In 1:14 scale truck building, the small fastening points often decide how cleanly a front-end assembly comes together. The King Pin Steel set is made for Tamiya-fit 1:14 applications and brings together the metal hardware needed for one king pin mounting point in a compact replacement or workshop part. The visible components are a long countersunk threaded screw, a flanged spacer with recessed centre and a matching hex nut. That combination supports a flush screw seat at the mounting surface while the spacer sets the part position and the nut secures the connection. Steel construction gives this hardware the material character expected for mechanical model assemblies, especially where steering or axle-related parts rely on accurate fit between fasteners and mounting holes. As a model accessory rather than a complete vehicle, it adds a focused solution for repair benches, spare-parts storage and ongoing scale truck projects. Whether used to replace worn hardware or to complete a fresh 1:14 build, this set fits naturally into detail-oriented assembly work. The compact format also makes it practical to keep on hand with workshop supplies for regular maintenance on Tamiya-fit truck models.
Electronics
1:14 LED Flashing Light, accessory, orange
500907580€58.99
A rotating beacon is one of the details that gives a 1:14 scale working vehicle its finished road-going character, and this orange LED Flashing Light brings that look into a compact accessory format. The light unit is designed for 1:14 models and combines a swivelling effect with programmable operation, making it a strong visual addition on truck cabs, municipal builds or service conversions. The programming options go beyond a single light pattern. Programs 1 to 6 cover rotation to the left or right at 40 ms, 70 ms and 200 ms, while programs 7 to 13 provide different flash modes. The polarity is defined in the leaflet with orange as positive and black as negative, giving a clear basis for installation. The mounting diagram specifies a 4.5 mm hole, and the included fitting parts are shown compensating for roof pitch so the beacon can be aligned on sloped roof sections. For operation above 9.6 V, the leaflet states that a resistor must be soldered into the positive cable. On a scale truck, recovery vehicle or site support build, the beacon adds a functional light signature that changes the whole roofline once fitted. Age 14 years+ is stated in the product data, making this accessory suitable for hobby-focused model setups and detailed custom projects.
Electronics
1:14 LED Flashing Light, model accessory
500907579€53.99
This 1:14 LED flashing light set brings a compact lighting detail to compatible scale model projects with an orange upright design and wired connection parts. The assembly combines a small plug element with metal contact pins and attached leads, giving model builders a clear electrical component for installation into a larger vehicle setup. The included parts are arranged as a dedicated accessory for fitting, replacement or restoration work rather than as a standalone model. A yellow sprue frame holds the molded upright components, while the separate connector section provides the contact point for integration into the existing electronics of a compatible 1:14 build. The orange warning-light style makes the fitted result stand out clearly on service, utility or transport-themed model scenes where visible signal details shape the overall look. On the workbench, this accessory suits projects that need a defined upright beacon element or a fresh replacement for worn lighting parts. In a finished scale vehicle, the compact format supports neat installation without overwhelming the proportions of a 1:14 model. Age 14 Years.
Light & sound
1:14 LED Light-Set TRUCK, light kit
500906166€25.99
The 1:14 LED Light-Set TRUCK brings working vehicle-style lighting to model truck builds with a compact control unit and multiple LED outputs. Front indicators, rear indicators, front lights, rear lights, brake lights and reverse lights can be simulated through the module, so the model shows different light functions instead of a single constant glow. The unit operates on 4-6 V DC and draws a maximum of 210 mA. Its FUTABA plug system is compatible with TAMIYA models, and the connection layout links the module with receiver channels CH1 and CH2 as well as the steering servo and speed controller. The lighting setup uses 3 mm LEDs for the front and rear indicators plus the reverse lights, while the front lights, rear lights and brake lights use 5 mm LEDs. A demo mode starts when the transmitter is switched off, allowing the lighting functions to be shown without active driving input. With dimensions of 42 x 32 x 13 mm and a weight of 44 g, the module fits neatly into many 1:14 truck installations where electronics space is limited. The set suits hobby builds that aim for more detailed road-truck behaviour, whether the model is being wired for workshop installation, display preparation or running sessions on the course. Warning! Not suitable for children under 14 years.
Electronics
1:14 LED-PCB MAN Headlight, model accessory
500907391€70.99
Truck lighting is one of the details that gives a 1:14 scale build its finished road-going character, and this 7.2 V LED-PCB MAN Headlight set focuses that effect on the front end. The set consists of 2 mirrored circuit boards with mounted LEDs, long twisted wire harnesses and separate outer lamp leads, forming a matched left and right arrangement for compatible MAN model projects. The PCB layout carries several light components in different sizes, with copper traces and pre-mounted electronics that concentrate the headlight functions on compact boards. The wired design supports installation within a model body while keeping the light points positioned at the front where the headlight units belong. As an accessory in the Models & Accessories range, it fits naturally into detail work, repairs or lighting upgrades where electronic components are part of the visible build substance. In a workshop setting, the paired boards suit a truck build that needs a defined front lighting layout rather than a generic light source. On a finished shelf model or a running RC truck, the left-right board set and separate lamp leads help create a more complete MAN front-end appearance.
Electronics
1:14 LED-PCB Taillight, model accessory, 7.2V
500907385€57.99
Rear lighting is one of the details that gives a scale truck build its finished road-going character, and this 1:14 LED-PCB taillight brings that function into a compact electronic module. The board is specified for 7.2V systems and uses a 6-section taillight layout that suits model projects where the rear end needs a defined light signature rather than a plain single-lamp look. The set shown in the product data consists of 2 green printed circuit boards, each fitted with attached multicolour cables for connection work inside the model. Visible solder pads and printed traces point to a purpose-built lighting component rather than a decorative shell part, making it relevant for repair benches, replacement jobs and detailed custom builds. The rectangular PCB format with mounting holes near the ends supports practical installation on compatible model applications where a fixed rear light board is needed. In a workshop context, this kind of part fits ongoing maintenance just as well as a fresh scale project. It can be used when an existing rear light module needs replacement or when a 1:14 vehicle is being equipped with a more defined taillight arrangement based on a 7.2V electrical setup.
RC truck accessories
1:14 Lift Axle, conversion kit, trailer upgrade
500907734€99.99
A lift axle is a defining detail on many full-size trailers, and this 1:14 conversion kit brings that function into a scale workshop project for CARSON 3-axle trailers of the II and III generation. Built for one trailer axle with dummy air suspension, the set converts it into a working lift system with a clearly visible axle movement of about 6 mm. The mechanism is driven by a digital servo and uses an aluminum servo mount, an aluminum servo horn, new mounting brackets, air bellows and mounts, plus a steel lift mechanism to create the lifting action. Mounting hardware is included for the installation. A suitable servo with at least 10 kg torque is required separately; comparable dimensions are 40 x 20 x 38 mm. The kit is compatible with Fliegl Megarunner, Stake trailer III, Flatbed trailer III, Trailer chassis III, Building materials trailer III, Box trailer III, and all 2nd generation trailers. Installation in tipper models is not possible. On a finished trailer, the raised axle changes the stance in a way that looks closer to a working road-going combination. In the workshop phase, the conversion adds a focused mechanical upgrade that suits model-building enthusiasts who enjoy functional trailer details as much as the final appearance.
Basic accessories
1:14 Lifted-Suspension Kit, model accessory
500907618€42.99
The 1:14 Lifted-Suspension Kit +8 mm 3A.T.T adds a clear chassis conversion to a 1:14 model setup, shifting the vehicle profile upward with a measured +8 mm lift. Silver metal plates, connector straps and spacers give the assembly a technical workshop look that suits scale truck projects with visible hardware details. The set is built around 2 large trapezoid side plates with multiple drilled holes, 4 narrow connector straps, 2 square reinforcement plates, 4 cylindrical threaded spacers, 4 black screws and 4 hex nuts. This combination creates a defined mounting structure rather than a cosmetic add-on, with each hardware group serving the suspension conversion itself. The drilled hole pattern supports attachment at fixed points, while the spacers establish the added height within the assembly. The metal parts also bring a crisp mechanical finish that matches the functional character of a lift modification. On a display shelf or within an active 3A.T.T build, the +8 mm conversion changes the visual stance and opens up new scope for detail-focused custom work. The age marking of 14 years and up places the kit in the hobby field, where model builders can combine scale presence and hands-on mechanical assembly in one focused upgrade.
Basic accessories
1:14 Lifted-Suspension Kit, model accessory
500907452€34.99
A raised chassis setup can change how a scale truck sits and moves on the course, and this 1:14 Lifted-Suspension Kit brings that change into a compact tuning upgrade. The conversion is made for compatible 2A.T.T model applications and adds 8 mm of lift, giving the suspension geometry a visibly taller stance. The set includes a large slotted metal plate, 2 square metal plates, 2 curved connector plates, 4 long screws, 4 threaded fittings, 4 short screws and matching hex nuts. The elongated cutouts in the main plate allow the mounting position to be aligned during installation, while the threaded fittings and paired hardware create the connection points needed for the lifted setup. As a model accessory, this is a workshop-focused add-on rather than a ready-to-run vehicle. Batteries are not included. On shelf tracks, diorama builds or running areas with uneven transitions, the extra 8 mm can help a compatible 1:14 chassis clear edges and surface changes with a taller suspension layout. The hardware-based conversion also suits rebuilds, maintenance sessions and tuning projects where ride height is part of the setup. Warning! Not suitable for children under 14 years.
Electronics
1:14 Light Case Clear, model accessory, universal
500907256€26.49
Lighting details shape the character of a scale vehicle, and this 1:14 Light Case Clear set adds that crisp lamp finish with 2 transparent lens units in a universal format. The clear design suits model-building enthusiasts who want to refine a body shell, replace worn light parts or prepare a custom lighting layout on a 1:14 project. The set is intended for models and accessories work rather than as a complete vehicle system, making it a practical choice for workshop stock, rebuilds and visual upgrades. The universal specification supports use across different 1:14 applications where the chosen build calls for clear lamp covers. In body conversion work, transparent light cases help preserve the defined shape of the lamp area while leaving the final installation concept open to the builder. That makes the set useful both for fresh custom projects and for restoring scale details on an existing model. On a truck build, a service vehicle conversion or another 1:14 scale scene, the 2 matching light cases create a consistent look across the front or rear lamp positions. The compact accessory format fits naturally into hobby bench routines where replacement parts, finishing details and scale accuracy all matter.
Tyres & rims
1:14 Lowloader Tire-set, model accessory, 4 pcs
500907583€26.49
A lowloader only looks complete when the running gear matches the rest of the build, and this 1:14 tyre set supplies 4 replacement tyres for that exact task. The black rubber finish and fine block-pattern tread give the wheel area a technical, road-going character that suits detailed transport and trailer models. Each tyre is shaped as a dedicated accessory for 1:14 lowloader applications, making the set a practical choice for maintenance, restoration or visual refresh work on an existing model. The tread blocks create a defined outer surface rather than a plain slick look, which helps preserve the scale impression around the axles and mudguard area. With 4 tyres in the pack, the set covers a complete grouped wheel change where matching appearance matters across the vehicle. The smooth sidewalls keep the profile clean and focused on the tread pattern. On the workbench, the set fits naturally into spare-parts storage for ongoing model upkeep. During a rebuild or detail update, the 1:14 format keeps the tyre choice aligned with the scale of the lowloader, while the rubber material supports the realistic look expected in a transport model setup. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 M-B Arcos, top light holder accessory
500907599€71.99
Truck styling details often define the whole character of a scale build, and this 1:14 top light holder is shaped for an M-B Arcos project where roof lighting needs a dedicated mounting point. As a model supplies accessory, it adds a specific fitting instead of relying on a universal improvised bracket. The 1:14 scale keeps the part aligned with matching truck dimensions, while the M-B Arcos designation makes its intended application clear for builders working on that subject. Used on the upper cab area, the holder supports a more resolved lighting layout and a cleaner visual transition between the roof section and added lamps. That makes it useful in builds where the finishing stage matters as much as the running gear. The part can also help keep the light position consistent across a detailed truck body where symmetry and placement affect the final appearance. In a workshop setting, this accessory fits naturally into a body detailing session focused on truck customisation. It also suits display-oriented builds where roof lighting is part of the chosen look, giving the cab a more purposeful scale-truck presence. Age 14 years+ Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Mainplate Batt Hold, RC accessory, aluminum
500907593€69.99
This 1:14 aluminum mainplate and battery holder is made for 2 axle and 3 axle RC truck builds, adding a defined chassis section for battery installation in detailed scale projects. The aluminum construction brings a precise, technical look that fits naturally into workshop-focused model building and truck conversions. As an 8-part accessory set, it supports a structured fitting process around the frame area rather than acting as a generic add-on. The mainplate forms the base for the battery holder, creating a dedicated position within the chassis where the drive battery can be mounted as part of the build layout. That makes it useful for model builders working on scale truck configurations where component placement, access and overall frame organisation matter during setup. The 1:14 scale format keeps the set aligned with matching truck dimensions, while the 2 axle and 3 axle compatibility broadens its use across different chassis concepts in the same scale class. On the bench, this accessory suits rebuilds, upgrades and fresh assemblies where the battery area needs a more defined structure. In running models, a clearly integrated battery position supports a neater overall chassis arrangement and a more purposeful technical finish.
Basic accessories
1:14 MAN TGX XLX, light holder, brass accessory
500907095€89.99
The MAN TGX series is a familiar sight in modern long-haul transport, and this 1:14 top light holder brings that road-truck character into a scale build with a compact metal detail. Designed for the MAN TGX XLX, the accessory combines a shaped bar with 4 polished lamps to create a more defined front-end look on a truck model. The part is made from brass and finished with nickel plating, giving the surface a bright metallic appearance that suits display-focused builds as well as running models. Each lamp can be illuminated, so the holder adds more than a visual accent when integrated into a lighting setup. The bar mounts individually on the frame, which keeps the placement clear and preserves the clean outline of the truck body. In a 1:14 project, details such as auxiliary lighting and metal trim help separate a standard build from a more personalised rig. On a workshop bench, the holder adds a focused upgrade during a custom build or refresh. In a finished truck scene, the polished lamp bar strengthens the scale look of the MAN TGX XLX whether the model is parked for display or prepared for the next driving session.
Basic accessories
1:14 MAN TGX XLX, light holder, rear frame
500907124€46.99
The MAN TGX series is a familiar sight in modern long-haul transport, and this 1:14 light holder brings that working-truck character onto the rear section of a scale cab. Designed for the MAN TGX XLX, the set adds a dedicated rear mounting point for auxiliary lighting and sharpens the technical look behind the driver's cab. The holder is made from brass with a nickel-plated surface, combining a precise metal frame with a bright finish that suits detailed truck builds. It can also be used as a holding frame on the cab rear panel, where the 2 chromium worklights create a clear, workshop-style lighting arrangement. Each lamp includes 2 clear lenses and 2 blue lenses, opening different styling directions for the rear section without changing the basic mounting concept. The lamp units are prepared for refitting with bulbs or LEDs, which makes the set suitable for builders planning a functional lighting conversion as part of a larger 1:14 truck project. On a shelf, in a workshop-themed diorama, or as part of an RC truck build, the frame adds visible structure to the rear wall of the cab. Age 14+
Basic accessories
1:14 MB Actros Gigasp. Top Light Holder
500907134€96.99
The Mercedes-Benz Actros is one of the defining long-haul truck families on European roads, and the Gigaspace cab is known for its tall roof profile and distinctive upper section. This 1:14 MB Actros Gigasp. Top Light Holder translates that roofline detail into a dedicated scale accessory for truck modelling projects. Named as a top light holder and matched to the 1:14 scale, this part is shaped for MB Actros Gigasp. builds where the cab silhouette and roof equipment matter to the finished appearance. Rather than using a generic fitting, the model-specific designation keeps the accessory tied to the Actros Gigasp. form named in the data. Within a truck build, the upper cab area draws the eye quickly, so a dedicated holder helps define that section with a clearer, more intentional layout. The compact accessory format also makes it a focused addition for builders refining an existing model or planning a more detailed new project. On the bench, this kind of scale part suits cab customisation, restoration of a truck model, or completion of a subject-specific exterior setup. In a display line-up or during running sessions, the roof section gains a more resolved look that fits the 1:14 truck format and the MB Actros Gigasp. designation.
Basic accessories
1:14 MB Arocs Fuel Tank Mount, model accessory
500907584€18.99
The Mercedes-Benz Arocs is a familiar sight in heavy-duty transport, known for its angular cab design and work-focused road presence. This 1:14 aluminium fuel tank mount set brings that truck-specific detail into a model build with 2 dedicated mounting parts for the MB Arocs. The set is designed as a model accessory rather than a universal bracket pack, focusing on the fuel tank area of a 1:14 truck project. Aluminium construction gives the parts the crisp, technical look that suits scale commercial vehicle detailing, while the shaped brackets and fastening hardware support a clean integration with the matching layout. The 2-piece mount format concentrates on one defined installation point, which helps keep the build visually consistent with the Arocs theme. As an add-on for model supplies, it fits naturally into detail work where vehicle-specific hardware matters as much as the larger body components. On the bench, this set supports focused assembly sessions that add another layer of realism to a truck chassis. In a finished display or running model, the fuel tank mounting area gains the kind of functional-looking structure that strengthens the overall scale impression. Recommended age: 14 years +
Basic accessories
1:14 MB Arocs/Actros 3A, frame cover, accessory
500907598€63.99
Heavy-duty road trucks such as the Mercedes-Benz Arocs and Actros are defined by their exposed chassis sections as much as by the cab itself. This 1:14 frame cover is made for MB Arocs and Actros 3A model builds and adds a dedicated detail to that visible structural area. Used on the frame section, the cover helps complete the look of the truck around the rear chassis and supports a tidier transition between surrounding components. The 1:14 scale keeps the part in step with truck modelling projects built to that format, which matters when visible proportions and fitted details shape the overall impression. As a model accessory rather than a full vehicle, it focuses on one specific area of the build and gives that section a more resolved appearance. The designation names MB Arocs and Actros 3A directly, so the part is aimed at those corresponding model applications. The frame cover fits naturally into upgrade work, restoration of an existing truck model or a fresh custom build where the chassis area is meant to carry more visual depth. Age marking: 14 years.
Electronics
1:14 MB Headlight, LED PCB, model accessory
500907558€70.99
A 1:14 scale model gains a more defined front end with the MB Headlight LED-PCB set, built around 2 mirrored circuit board modules for 7.2 V lighting. The paired layout, compact green boards and attached LED elements give hobby projects a dedicated electronic headlight solution rather than a cosmetic body detail. Each side uses its own PCB module, creating a left-right arrangement that suits scale vehicle builds with separate front light positions. The boards carry mounted electronic components and pre-fitted wire leads in several colours, which helps keep polarity and routing distinguishable during installation. The 7.2 V specification anchors the set to model electrics that match this voltage, while the compact format leaves room for integration inside a detailed body or chassis area. As an accessory rather than a complete vehicle, the focus stays on functional lighting hardware for upgrades, repairs or project-specific conversions. In workshop use, the set fits naturally into custom 1:14 builds where front lighting is part of the finished look and electrical layout. It also suits replacement work on existing models that need matched headlight electronics on both sides.
Electronics
1:14 MB Side-marker LED Set, model accessory
500907560€17.99
Side-marker lights are a small detail with a big effect on a finished truck build, and this 1:14 MB Side-marker LED Set brings that scale look into compatible model projects with 2 light units for 7.2 V and 12 V setups. The compact lighting format and ready-made wiring make it a focused addition for builders refining exterior details on a model rather than changing its core mechanics. The set belongs to the models and accessories range and is intended as a lighting add-on for 1:14 scale applications. Long red and black leads are already attached, with small plugs and connector ends that support integration with existing model electronics. Black heat-shrink sections cover the wire junctions, helping keep the cable runs neat inside the bodywork or along the chassis. Because the set is built around side-marker lighting, it adds a realistic visual accent at the flanks of a truck body where illuminated details shape the finished appearance. On a workshop bench, the wiring can be planned as part of a custom truck build or a lighting upgrade on an existing 1:14 model. In a display setting, the illuminated side markers strengthen the road-going character of the vehicle, while on running models they extend the visual detail beyond the main headlight and rear light areas.
Electronics
1:14 MB Taillight, LED PCB, model accessory
500907556€35.99
This 1:14 LED PCB taillight assembly is built for model projects that call for a clear rear lighting setup and a compact electronic format. With a 7.2 V specification and MB taillight designation, the unit suits enthusiasts looking to refine a compatible build with dedicated illuminated detail. The set uses 2 small circuit boards rather than a single large light bar, which helps distribute the lighting elements across the rear section of a model. Attached multicolour wire leads support connection within the vehicle layout and give the assembly the character of a purpose-made lighting component rather than a decorative add-on. The PCB construction keeps the electronic paths defined on each board, while the pre-mounted light elements concentrate the function into a small installation footprint. In workshop use, the taillight assembly fits naturally into restoration jobs, spare-part replacement, or scale-focused customisation where rear light detail shapes the finished look. Age marking: 14 years and up. For model builders, it adds an electronic lighting element that can help a compatible vehicle body read more convincingly once installed.
RC truck accessories
1:14 Metal Front Axle, model part, steering
500907801€19.99
A front axle defines both the stance and the steering layout of a scale truck build, and this 1:14 metal front axle with steering linkage brings those two core elements together in one dedicated model part. The metal construction gives the assembly a clearly specified material base for workshop use, while the included linkage ties the axle directly to the steering function named in the designation. Within a 1:14 build, a front axle is more than a visual detail: it is the component group that shapes how the front end is assembled and how the steering hardware is organised. This version is supplied as a front axle with steering linkage rather than as an isolated single piece, which helps keep the relevant steering section together for replacement or planned parts work. The designation identifies it as a model supply within the models and accessories range, making it a focused choice for maintenance benches, rebuild projects or scale-oriented truck assemblies. The age marking is 14 Years. Whether the task is replacing a worn front-end assembly, preparing a fresh chassis project or refining a detailed 1:14 vehicle, this axle fits naturally into hands-on hobby work. It suits model-building enthusiasts who value clearly defined components and a steering assembly that is named upfront in the specification.
RC truck accessories
1:14 MFC-TLS IR Low Loader, control unit
500907710€84.99
Built for 1:14 truck modelling, the MFC-TLS IR Low Loader control unit extends TAMIYA MFC-03/01 with infrared signal transfer to a matching trailer setup. The module sends lighting and auxiliary commands from the tractor unit to the trailer, creating a clean functional link for low loader combinations with steerable axles. Power is supplied via the receiver at 5-7.4 V/DC, so the module integrates into an existing radio-controlled electronics layout without a separate power source stated in the data. Rear light circuit boards for 3-chamber or 6-chamber taillights connect through screw terminals, and each of the 7 outputs supports loads of up to 500 mA. That layout also leaves room for additional lamps such as marker lights, roof lights or wind deflector lights, which are switched through the parking light function. The package contents include the MFC IR transmitter module, an IR transmitting diode and a 5-pin cable set. In a detailed truck and trailer build, the unit supports coordinated light behaviour and extra driven functions across the combination. The control paths also cover steering-related trailer functions, making it suitable for low loader setups where steerable axles add a more involved operating sequence. Recommended age: 14 years. The TLS low loader control unit 500907712 is optionally required for the trailer.
Basic accessories
1:14 Mounting Set Front Drive Axle, model part
500907280€75.99
A driven front axle changes both the look and the mechanical character of a 1:14 model, and this mounting set is made to support that conversion with dedicated installation parts. The set is specified for a 1:14 front drive axle and centres on the hardware needed to mount the axle assembly into the chassis layout. Visible components include 2 assembled leaf spring units, 2 angled metal brackets with slotted and round mounting holes, 2 cylindrical pins or spacers, 1 ball stud or post, 1 hex nut and 1 threaded rod. The instruction material also references 3 x 30 mm screws with 3 mm nuts and 3 x 8 mm screws with 3.2 mm washers and 3 mm nuts for the fastening steps around the axle and bracket structure. Slotted bracket holes allow the mounting points to be positioned during installation, while the spring packs create the suspension-style connection between axle and frame parts. The assembly drawings show the bars fixed across the axle housing and the mounted unit secured to the chassis base. In a workshop-style build, these parts support a front axle installation that looks mechanically convincing and matches the detailed character expected in 1:14 truck and construction models. The set suits hobbyists from 14 years who enjoy working through axle, bracket and linkage assembly with scale-focused hardware.
Basic accessories
1:14 Mud Guard-Set, trailer accessory
500907068€21.49
Built for semitrailer projects in 1:14 and 1:16 scale, the Mud Guard-Set brings a clear bodywork detail to dump trailer layouts. The 4-piece set is intended for wheel-area coverage and gives compatible trailer builds a more complete outer line around the axle section. Each mud guard measures 76 x 35 mm, which helps when checking the available space on a trailer chassis before installation. The parts are suited to dump trailer applications, where the wheel arch area benefits from defined coverage that matches the rest of the body structure. As an accessory for model-building enthusiasts, the set supports repair work, replacement of existing guards, or the finishing of a fresh semitrailer build with matching parts across several wheel positions. In workshop use, the set fits naturally into scale trailer projects that need consistent detailing around the running gear. It also suits rebuilds where worn or missing guards would interrupt the overall line of the semitrailer, restoring a cleaner and more coherent appearance.
Basic accessories
1:14 Pallet with Wuerth-Packings Accessory
500907620€23.99
This 1:14 pallet with Wuerth-Packings brings the look of a prepared freight shipment into model logistics scenes. Stacked cartons, a euro pallet base, clear wrap and red straps combine into a compact accessory that reads instantly as warehouse cargo, whether placed beside a truck, on a loading dock or in a depot display. The printed Wuerth markings on the boxes give the load a distinct commercial character, while the visible EUR and DB pallet details echo the appearance of real transport units. The layered carton arrangement creates height and structure without needing extra loose parts, making the accessory easy to position in workshop, storage or delivery settings. At 1:14 scale, it fits naturally into layouts built around model trucks and freight environments, where cargo details help define the scene rather than leaving open space around the vehicle. Used on a trailer bed, next to a forklift area or as part of a warehouse corner, the pallet load adds a clear transport context to static displays and driving layouts alike. Age 14 Years
Basic accessories
1:14 Rear Bumper, trailer accessory, Euro
500907075€89.99
Refrigerated road trailers are defined by the details at the rear, where doors, locking bars and bumper hardware create the unmistakable working-truck look. This 1:14 Rear Bumper for the Euro T-Reefer Semi-Tr. adds that characteristic finishing section to the back of the model with a metal construction and a clearly technical layout. The assembly is designed as a dedicated trailer accessory for 1:14 scale use and focuses on the lower rear area of the refrigerated semi-trailer. Red rear light units sit at the outer ends of the horizontal bar, while a central bracket and an upright mounting frame shape the structure in the middle. The visible fasteners and clamp-style mounting blocks reinforce the workshop-style appearance that suits detailed truck modelling. In combination with the rear door area, hinge detailing and locking hardware of the trailer body, the bumper section helps complete the proportions and visual balance of the model's tail. On a built semi-trailer, this accessory strengthens the realism of loading-bay scenes, road-train displays and scale transport line-ups. Age marking: 14 Years.
Basic accessories
1:14 Reduction Gear Unit 4:1, truck accessory
500013517€48.99
A 4:1 intermediate gearbox brings a different character to a 1:14 truck drivetrain by shifting the balance toward higher torque. This Reduction Gear Unit is built for model truck projects where stronger pulling power matters more than outright output speed, and the compact layout suits detailed chassis installations. The housing is described as light, while the internal drive uses ball-raced metal pinion gears. That combination focuses on controlled power transfer through the gearbox itself rather than on cosmetic add-ons. The unit is specified for all Tamiya trucks except Globe Liner 56304, which gives experienced builders a clear compatibility frame for workshop planning. As an accessory part rather than a complete running set, it is intended to work within an existing truck build and changes the drive behaviour through its stated reduction ratio. A corresponding universal shaft kit is required separately for use, so the gearbox belongs in planned conversion work or a fresh 1:14 truck setup with matching drivetrain parts. Age marking: 14 Years.
Basic accessories
1:14 Robert, driver figure, painted accessory
500907186€9.99
Robert brings a clear driver role into 1:14 model scenes with a seated pose that suits cabins, cockpits and other interior setups. The painted figure combines a black cap, white long-sleeve shirt, dark bib overalls and black boots, creating a workshop and transport look that reads cleanly inside utility vehicles and layout displays. The bent legs allow placement in seated positions, while the closed hands support convincing operator staging at steering wheels, control levers or dashboard areas where a standing figure would not fit. Painted face and hands complete the character without further finishing work, so the figure can move straight into a diorama, a truck cab or a machine interior. The male worker styling fits naturally into industrial, agricultural and transport themes where a visible driver helps define the function of the vehicle in the scene. In a model workshop display, Robert can occupy a parked cab and give the build a ready-for-duty look. In a moving vehicle scene or a static diorama, the 1:14 scale helps the figure sit in proportion with matching models and adds a more believable sense of operation.
Electronics
1:14 Roof Lamp PCB, model accessory, 7.2V
500907184€14.49
Roof lighting is a defining detail on many scale truck builds, and this 1:14 roof lamp set adds that electronic accent in a compact 7.2V format. The set includes 2 matching round PCBs, each fitted with an SMD LED and attached wires, making it a dedicated lighting accessory for model projects rather than a complete vehicle unit. The small board layout keeps the focus on the lighting function itself, with each module combining the LED element and PCB structure in one compact part. That format suits hobby builds where visible scale details matter and where wired components need to sit neatly within the model. The 1:14 scale reference makes this set relevant for matching scale projects, while the 7.2V specification defines the electrical setup the boards are designed for. With 2 lamp boards in the set, the lighting can be arranged as a balanced roof pair on a compatible build. In a workshop setting, the boards suit model upgrades, replacements, or fresh custom projects that call for roof-mounted lighting detail. The wired design also supports integration into existing electronic layouts where a separate lighting component is needed.
Electronics
1:14 Roof Lamp, model accessory, 12V SMD LED
500907399€14.49
Roof-mounted auxiliary lights are a familiar detail on working trucks, and this 1:14 roof lamp set brings that look into a scale build with a compact electronic format. The set includes 2 round lamp units, each built on an SMD LED PCB and designed for 12V operation, making it a focused addition for model builders refining a vehicle's upper bodywork. The small PCB-based construction keeps each light unit compact, while the wired layout supports direct integration into a custom lighting setup. In a 1:14 project, details placed high on the cab have a strong visual effect, and this pair gives that area a more technical, road-ready character. The 2-lamp format also suits symmetrical placement across the roof line, which helps preserve the balanced proportions expected in scale truck modelling. Minimum age: 14 years. Whether used in a fresh conversion or as part of an upgrade on an existing model, the lamp pair fits naturally into workshop-style builds where lighting details matter. Combined with other scale body features, the 12V SMD LED units add a precise finishing touch that reads clearly in close-up display views and during running sessions alike.
Basic accessories
1:14 SAF Coupler Plate, model accessory
500907378€46.99
In full-size trucking, the coupler plate is the working link between tractor and trailer. This 1:14 SAF Coupler Plate brings that technical detail into a scale build with a reinforced plastic main body and a mechanical layout shaped around mounted, moving parts. The assembly includes a central coupler housing, a rectangular frame, metal brackets, rods, springs, screws, nuts, washers and small fittings. Together these parts form a functional subassembly rather than a decorative surface detail, making it a strong choice for model truck projects that benefit from visible hardware and realistic chassis equipment. The reinforced plastic construction keeps the main component clearly defined, while the additional metal parts support the mounted structure and the linked movement of the mechanism. The spring elements and pivot points give the build a more technical character during assembly and once fitted to the model. On the bench, the set suits focused workshop sessions where mechanical details matter as much as the finished look. Installed on a compatible 1:14 truck model, the coupler plate adds an authentic commercial-vehicle feature that strengthens the scale impression of the chassis area.
RC truck accessories
1:14 Scania 770 Roof Lights, model accessory
500907804€16.49
The Scania 770 stands out on the road with its tall cab format and strong front-end presence, and this 1:14 roof light board brings that character into a scale truck build with a focused lighting detail. Designed as a model accessory, it places 5 LED roof lights across the upper cab area to create a more defined silhouette on the finished Scania 770. The one-piece board format groups the 5 lights into a single roof-mounted assembly, which helps keep the layout consistent across the cab line. As a 1:14 accessory, it is shaped for scale modelling work where body styling and truck-specific detailing matter as much as the main chassis. The LED configuration adds a technical accent to the upper section of the model and gives the roof area a clearer visual structure than an unadorned cab top. The Scania 770 reference keeps the styling tied to a named truck subject rather than a generic lighting add-on. On the bench, the light board fits naturally into a detailed truck project alongside cab finishing and exterior upgrades. In display use or during scale driving sessions, the 5-light arrangement gives the model a more distinctive roofline and a stronger long-haul truck character.
RC truck accessories
1:14 Scania 770S Front PCB, truck lighting
500907674€189.99
Modern long-haul trucks rely on their front light signature as much as on grille shape, and the Scania 770S is one of the clearest examples of that design language. This 1:14 front PCB lighting set translates that look into a dedicated lamp assembly for the TAMIYA Scania 770S, combining reflector detailing with functional illumination for a more authentic scale finish. The set is built around 2 matching front light modules with integrated wiring and PCB-based electronics. Each housing contains 16 LEDs, arranged to reproduce the reflector structure with a more realistic visual depth than a plain lamp insert. The lighting functions include daytime running light and side position light, adding separate illuminated zones that sharpen the truck's front profile. The specified input range of 7.2 to 12 V DC suits RC truck electrical systems in this class and gives clear compatibility guidance for installation planning. Mounted on the model, the lamp units bring more definition to the front corners, whether the truck is standing in a workshop-style display or running on an indoor course. For 14 Years and up, this accessory adds a technical finishing step that suits hobby builds focused on scale detail and working light functions.
RC truck accessories
1:14 Scania 770S LED Board Side, model part
500907803€31.99
This 1:14 side LED board set is made for Scania 770S model builds and brings a defined lighting component to the truck's side sections. With 2 matching boards in the set, the layout suits symmetrical installation and gives the model a more complete illuminated appearance. The designation names a 3A specification, adding a concrete electrical reference for integration into a compatible lighting setup. As a dedicated model accessory rather than a complete vehicle, the set focuses on one specific area of the build and supports more detailed finishing work on a Scania 770S project. The side board format helps separate this component from front or rear lighting elements and makes it easier to plan placement within a larger 1:14 truck configuration. In a workshop setting, the pair can be fitted during a fresh build or used to refine an existing Scania 770S model with added side illumination. The clearly defined scale and vehicle reference also make the set a focused choice for hobbyists working on truck detailing with matching 1:14 components.
RC truck accessories
1:14 Scania 770s LED Board, model accessory
500907802€32.49
The Scania 770 S belongs to the latest generation of long-haul trucks, known for its bold front design and strong road presence. This 1:14 LED board is made for that look in model form, adding a defined lighting element to the front area of a Scania 770s build. The accessory is specified as a 4+3 front LED board, giving model-building enthusiasts a clear layout for cab detailing rather than a generic light part. In a 1:14 truck project, details at the grille and roofline shape the whole character of the finished replica, and this board focuses attention on that upper front section. The Scania 770s designation keeps the part tied to a specific subject, which matters when a build is planned around the lines and proportions of one truck model. As a model accessory rather than a complete vehicle, it suits hobby benches where selected parts are added step by step to develop a more individual finish. Whether the goal is a shelf display, a show-style truck replica, or a running 1:14 build with extra visual definition at the front, this LED board adds a distinct custom element. The compact format also makes it a useful choice for targeted upgrades where one visible detail can change the overall impression of the cab.
RC truck accessories
1:14 Scania 770S Positionlight Set, LED kit
500907676€85.99
The Scania 770S is known for its bold front-end presence, and this 1:14 position light set translates that character into a dedicated LED upgrade for scale truck builds. With 21 LEDs and support for 7.2 V and 12 V systems, the set is aimed at model-building enthusiasts who want to add a more intricate lighting layout to a Scania 770S project. The wiring harnesses are arranged for several mounting points around the truck body, with light outputs assigned to roof lamps, side skirt position lights and multiple front lighting locations. Alongside the roof position lamps with high beam function, the set also covers 5 lightbar pods, a bumper lightbar and an auxiliary light in the radiator grille. This spreads the illumination across upper, central and lower sections of the cab, giving the model a more structured and realistic light distribution once installed. The prewired LED lines also support neat routing through a detailed truck build where cable placement matters as much as the finished effect. On a display shelf, in a workshop build, or during powered running sessions, the set adds visible definition to the Scania 770S bodywork and helps separate the truck's key styling zones through light placement. The set is not compatible with TAMIYA MFC-01/03.
Basic accessories
1:14 Scania R470/R620 Top Light Holder
500907064€82.99
Classic Scania cab styling gains an extra scale detail with this 1:14 top light holder for the Scania R470 and R620. The accessory is made for model truck builds that benefit from a defined roof-mounted lighting position and a more finished cab line above the windscreen. The holder is made of brass and finished with nickel plating and a high-gloss polished surface, giving the assembly a bright metallic appearance that stands out cleanly against the cab. Its model-specific designation for the Scania R470/R620 keeps the look aligned with those named truck versions rather than using a generic roof bar. The lamp units are injection-molded, adding a distinct material contrast between the metal holder and the shaped light elements. Because the lamps can be lighted, the accessory also supports functional detailing as part of a broader truck lighting setup. On a workshop bench, this accessory suits detail-led upgrade projects where the roof area needs a sharper visual focal point. In a finished 1:14 display truck, the polished holder and lamp arrangement help complete the upper cab section with a scale look that fits road truck styling. Age 14+
Basic accessories
1:14 Seat with Mounting Bracket Accessory
500907359€8.49
A fitted seat can change the whole impression of a scale cabin, and this 1:14 Seat with mounting bracket brings that interior detail into model vehicle projects with a single combined assembly. The black component pairs the seat and bracket in one unit, giving 1:14 builds a defined driver position and a practical mounting base at the same time. The assembly is supplied as a seat with its bracket rather than as separate loose interior parts, which helps keep installation planning focused on one matching component. The product image shows a central round joint linking the connected sections, suggesting a pivoting or articulated connection within the assembly. That layout supports model projects where positioning, alignment or replacement of a cabin component matters as much as the visual finish. As an accessory in the Models Supplies range, it fits naturally into repair work, restoration tasks and custom model conversions. In workshop use, the component can serve as a replacement for a worn or missing cabin part or as an added interior element in a 1:14 conversion. The compact assembly also suits hobby benches where compatible scale details are selected piece by piece to complete a more convincing vehicle interior.
Basic accessories
1:14 Servo Mount, gearbox accessory
500907287€32.49
A 2-speed gearbox adds a distinct mechanical layer to a scale truck build, and this 1:14 servo mount is made to support that shifting setup with dedicated hardware. The set combines a mounting plate, linkage rod and fastening parts for integrating the servo connection into a compatible 1:14 chassis layout. The rectangular bracket uses screw mounting points and a central cutout to align the assembly on the vehicle frame, while the linkage rod connects the servo movement to the gearbox shift action. Assembly drawings in the supplied documentation show the bracket fixed to the chassis with washers and screws, with the linkage routed through the centre of the mounted section. That layout helps keep the shifting mechanism organised within the upper chassis area instead of relying on improvised mounting solutions. In workshop sessions, this accessory suits scale truck projects that use a 2-speed transmission and need the matching servo support parts. It fits naturally into drivetrain-focused builds where clean linkage routing and a defined mounting position matter as much as the finished driving function.
Electronics
1:14 SMD-LED White 7.2V, lighting set
500907396€9.99
This 1:14 lighting set brings white SMD-LED illumination to scale model projects that use a 7.2 V electrical setup. With 2 light units in the pack, it adds a compact lighting solution for builders working on vehicle detailing, replacement work, or custom electronics integration. The set is based around small SMD-LED components, making it suitable where a discreet light source is needed inside a model body or behind existing light positions. The product image shows a red-and-black two-wire cable prepared for connection and 2 blue axial resistors with metal leads, pointing to a layout intended for wiring into a model's electrical system. This makes the set relevant for hobby tasks that involve soldering, cable routing, and adapting lighting to a 1:14 build. In use, the 2 white LEDs can be installed as a pair for symmetrical lighting on the same vehicle or used to restore an existing light function on a scale model. The 1:14 format keeps the set aligned with matching model dimensions, while the 7.2 V specification gives a clear electrical reference for planning the installation within a workshop or hobby bench setup.
Basic accessories
1:14 Speed-up spindle drive shaft, spare part
500907611€40.99
A slim metal linkage part can make the difference between a model that sits idle and one that returns to its intended mechanical action. This 1:14 Speed-up spindle drive shaft is specified for reference 56545 and is shaped for use as a matching spare part within that setup. The component combines a smooth cylindrical shaft body with a threaded stud on one end and a rounded eyelet on the other. That layout points to a connection between fixed mounting hardware and an adjustable or screwed-in assembly point, while the brass-coloured collar at the transition adds another defined construction detail visible on the part itself. As a replacement component, it is aimed at keeping an existing model mechanically complete rather than changing its character or adding unrelated functions. The 1:14 scale note keeps the part tied to the intended model size, and the 56545 reference gives a concrete match point when selecting the correct spare. In workshop use, the shaft fits naturally into repair, maintenance or restoration tasks where a worn, bent or missing linkage needs to be exchanged for the proper part. The clearly formed eye mount and threaded end support straightforward identification during parts sorting and model servicing. Age marking: 14 years
RC truck accessories
1:14 Steel Drive Shaft 47-57 mm, model part
500907795€17.49
A steel drive shaft in 1:14 scale format brings a core drivetrain component to compatible model vehicle builds. The stated 47-57 mm length range defines the working span clearly, making this part relevant wherever that exact distance is needed between connected drivetrain points. As a model accessory in the Models & Accessories range, this shaft is aimed at repair, replacement, or planned drivetrain setup work rather than decorative use. The steel construction places the focus on a metal transmission part for hobby applications, and the compact 47 mm to 57 mm specification gives a concrete reference when matching an existing assembly. With a minimum age marking of 14 years, the part sits in a hobby context shaped by model-building and technical maintenance. The designation itself keeps the function straightforward: drive shaft, steel construction, 1:14 scale reference, and a defined length window. On the workbench, this kind of spare part supports routine servicing of compatible RC models, whether an existing shaft is being replaced or a drivetrain layout is being completed with the required size. It also fits neatly into a stocked parts assortment for ongoing maintenance of 1:14 vehicle projects.
RC truck accessories
1:14 Steel Drive Shaft, model part, 40-45 mm
500907793€17.49
This 1:14 steel drive shaft is a compact model part for driveline setups that need a stated length range of 40-45 mm. The steel construction and scale-specific designation give model-building enthusiasts a clear starting point for matching the part to an existing build or replacement task. Within a model workshop, a drive shaft sits at the heart of mechanical power transfer, linking rotating components in the drivetrain. Here, the key data stays focused and usable: 1:14 scale reference, steel material, and a 40-45 mm size range. That makes the part easy to place in projects where a short shaft section is required and where the dimensions need to be checked against the installed layout. The concise specification also suits spare-parts planning, because the material and size can be identified quickly without sorting through broader vehicle claims that the data does not state. Whether the task is replacing a worn shaft in a running model or selecting parts for a fresh chassis setup, this component brings the essential information into one straightforward format. The 40-45 mm range supports comparison against existing hardware, while the steel build keeps the focus on a concrete, named material for hobby use.
RC truck accessories
1:14 Steel Drive Shaft, model part, 75-100 mm
500907800€17.49
This 1:14 steel drive shaft is a dedicated drivetrain part for model assemblies that need an adjustable connection length from 75 to 100 mm. The steel shaft brings a clear mechanical role into the build, linking compatible drivetrain points within that stated span and supporting a precise, component-led setup. In a 1:14 model context, the 75 to 100 mm format gives room for installations where the distance between connected parts is not fixed to a single length. That makes the shaft relevant for replacement work as well as for fresh assemblies built around matching dimensions. The steel construction keeps the focus on the part's intended function as a drivetrain link rather than a decorative add-on. With the age marking of 14 Years, the part sits in a hobby-focused model range shaped around detailed builds and technical component choices. Whether used to replace a worn drivetrain link or to complete a compatible 1:14 project, the shaft fits naturally into workshop-style model building sessions. It suits hobby benches where measured component selection, matching dimensions and drivetrain layout all matter to the finished assembly.
Basic accessories
1:14 Steel Grab Handle, model accessory, 2-pack
500907374€14.49
On a low loader, the small fittings around the ramp do much of the visual work. This 1:14 Steel Grab Handle set supplies 2 matching parts for that area, giving model builders a dedicated accessory for low loader ramp detailing rather than a generic hardware substitute. Each piece follows a long, narrow form with a loop opening at one end and an eyelet at the other, a layout suited to linking points on the ramp assembly. The paired format supports left and right side installation where mirrored or matching components are needed. In a scale build, details of this size help keep the proportions of the trailer consistent, especially around moving or fixed ramp sections where attachment points stay visible. The set is aimed at model hobby work and fits naturally into repair, restoration or parts replacement tasks. Used during a rebuild or while refreshing an existing trailer, the 2 handles help return the low loader ramp to a complete, scale-focused appearance. The 1:14 format makes the set relevant for enthusiasts working on matching transport models and looking for the correct dedicated ramp component.
RC truck accessories
1:14 Steering Axle, truck accessory, steel
500907735€99.99
In 1:14 truck building, the steering axle shapes how the whole front end responds on the road. This pre-assembled front axle combines a hardened steel center section, hardened steel steering knuckles and aluminum linkages into a ready-to-install unit for TAMIYA truck models. The axle body forms the core of the assembly, while double plain-bearing-mounted steering knuckles support precise steering movement at each side. A steel tie rod with left- and right-hand threads allows fine tracking adjustment directly at the linkage, which helps dial in the front end with more control during setup. Backlash-free M3 ball joints transfer the steering motion through the system with accurate, direct action. The combination of steel load-bearing parts and aluminum linkages gives the assembly a focused mechanical layout built around steering precision. Installed on compatible TAMIYA truck chassis, the axle suits fresh builds, rebuilds and targeted front-end upgrades where exact steering response matters. The ready-for-installation format also keeps workshop time focused on fitting and setup rather than on assembling the axle itself.
Basic accessories
1:14 Sticker Truck Ornamental Strip Decals
500907085€22.49
The 1:14 Sticker Truck Ornamental Strip decal sheet adds bold truck styling to model builds with translucent A4 decal foil and a broad mix of ornamental graphics. Long stripe elements, lettering and themed emblems give 1:14 truck bodies extra visual detail, whether the focus is a clean side profile, a decorated cab roof or a trailer panel with road-inspired markings. The sheet brings together several graphic directions in one format. Visible motifs include flame and stripe designs in black, grey, blue and red, plus stars, paw prints, eagle graphics, pirate-style faces, Route 66 shields and vertical LONG VEHICLE markings. Text decals such as ROADKING, HIGHWAY BANDIT and TRUCKER-style slogans widen the choice for custom layouts. Because the elements are pre-cut, individual sections can be arranged across doors, bumpers, side skirts or rear panels with more control than a single large graphic. This decal sheet suits workshop sessions focused on finishing and personalising a truck model after body assembly and paintwork. It also works for refreshing an existing 1:14 rig with new markings, adding contrast lines, themed badges or humorous message decals where a plain surface needs more presence.
Basic accessories
1:14 Sticker-Sheet Truck Caution-Signs
500907086€22.49
This 1:14 sticker sheet brings the visual language of European road freight to model trucks, trailers and tankers in a format made for detailed finishing work. The A4 sheet uses translucent self-adhesive foil, giving builders a broad selection of markings that can be placed across cab panels, trailer sides, rear doors or underride sections to sharpen the overall look of a scale build. Beyond general warning graphics, the sheet includes TIR plates, circular speed signs and oval country codes that suit international haulage themes. Orange hazard boards, dangerous goods placards and long reflective chevron strips open up more specific layouts for tanker, hazardous cargo or service vehicle subjects. Letter and number sets also support custom registration markings, fleet numbering and other small identification details that help a model look less generic and more like a working commercial vehicle. On a finished 1:14 truck, these decals can define the character of a long-distance tractor unit, an articulated trailer or a specialist transport rig. During a fresh build or a later refresh, the sheet adds another layer of scale realism through markings that full-size commercial vehicles carry every day.
RC truck accessories
1:14 Strobe Light orange, model accessory, 2 pcs
500907678€45.99
Amber warning lights are a familiar detail on working trucks, and this 1:14 strobe light set brings that look into a model build with 2 compact light units. Each housing measures 11.5 x 4.5 x 2.5 mm, giving the set a small footprint that suits scale installations where lighting needs to stay in proportion to the bodywork. The lights are designed for 7.2-12 V DC input and come as orange strobe units for model electrics in that voltage range. The image shows slim silver housings with attached wires, a layout that supports installation on body sections, roof areas or accessory bars where a separate warning-light detail is needed. Compatibility with the 500907633 beacon light bar set makes this set a focused extension for existing 1:14 truck lighting projects rather than a generic decoration. Used on a show truck, service vehicle or detailed working rig, the 2 strobe lights add a distinct visual accent that sharpens the scale appearance. In custom builds, restorations or lighting upgrades, the compact format leaves room for precise placement while the amber colour reinforces the look of real commercial vehicle warning equipment.
Basic accessories
1:14 Susi Driver Figure, model accessory
500907427€24.99
A seated driver figure brings scale and character into a model scene, and Susi does it in a clear 1:14 format that fits neatly into miniature vehicle interiors. The painted finish, smiling expression and casual outfit create a recognisable cockpit presence that turns an empty seat into part of the display. Susi is shown with brown shoulder-length hair, a red long-sleeve top with light cuffs, blue trousers and dark red shoes. The bent knees and slightly forward arms are shaped for a sitting position, which makes the figure especially useful for cabs, driver compartments and other enclosed layouts where standing figures do not fit naturally. As a named character figure, this accessory adds more than scale reference alone; it gives a vehicle or diorama a defined occupant and a more readable scene composition. In truck models, construction layouts or miniature display builds, Susi can be placed to complete the interior view and strengthen the sense of activity around the vehicle. The 14 Years marking is stated in the product data. Batteries are not included.
Basic accessories
1:14 TAM 3-Speed-Gear Hi-Torque Upgrade Kit
500907115€23.99
A 3-speed truck transmission changes character noticeably when the gearing shifts toward torque, and this 1:14 TAM 3-Speed-Gear Hi-Torque Upgrade Kit is built exactly for that kind of drivetrain tuning. The conversion uses a smaller motor pinion to deliver 20% more torque while reducing the truck's speed, creating a setup that puts more emphasis on pulling power than outright pace. At the centre of the kit is an 8T pinion paired with a front gear plate for the stated 1:14 application. Rather than changing the whole transmission, the upgrade targets the gearing itself, making it a focused modification for model builders who enjoy refining how a truck responds under load. The altered ratio changes how power is transferred through the 3-speed gearbox, so the effect comes from the mechanical setup rather than from electronics or software. With age marking 14 Years, the kit sits in the hobby segment where drivetrain parts and fitment details matter. This kind of conversion suits workshop sessions built around tuning, rebuilding or adapting an existing 1:14 truck for a different driving feel. It also fits display and running models where lower speed and stronger torque better match the intended use of the transmission.
Basic accessories
1:14 Tamiya Alum. Frame, model accessory
500907063€24.49
Custom fabrication is part of the appeal in 1:14 truck building, and this undrilled aluminium frame stock opens that route with a clean, workshop-ready starting point. The bright-drawn surface and rounded edges give the material a neat finish while keeping the profile comfortable to handle during measuring, marking and cutting. The channel section is defined by 21 mm height, 7 mm width and 1.5 mm thickness, giving model builders a clear basis for planning structural work around scale proportions. Each length measures 1 m, and the 2 x 1 m format provides matching stock for paired frame rails or other symmetrical construction tasks. Because the material is undrilled, mounting points and cut lengths can be set to the needs of the specific build rather than following a fixed hole pattern. That makes it suitable for replacement sections, scratch-built chassis work or adapted layouts within 1:14 Tamiya projects. On the bench, the long lengths support careful alignment before drilling and fastening, especially where a build calls for matched sides and clean spacing between cross members. Age 14 years+ is stated for this model accessory.
Basic accessories
1:14 Tension Belt Dummy, model accessory, 10x
500907143€11.29
Curtainside trailers are defined by the hardware that runs along their flanks, and this 1:14 Tension Belt Dummy set brings that visual cue into a scale build with 10 matching detailing parts. The format suits model-building enthusiasts who want a transport trailer to carry the look of real side-fastening equipment across the body. The set is intended for 1:14 model projects and focuses on exterior detailing rather than mechanical function. The supplied parts are arranged as moulded components for placement on a curtainside trailer, where they add structure and a more technical finish to the side area. The designation Tension Belt Dummy makes the decorative role clear, so the set can be used to sharpen the scale impression of a build without suggesting a working strap mechanism. In workshop scenes, depot layouts or road transport dioramas, these details help a trailer body read more convincingly at model scale. Used during a fresh build or as part of a later upgrade, the 10-piece set gives builders a straightforward way to add repeated side detail across a trailer. Age marking: 14 Years. The compact accessory format also suits spare-parts storage and planned custom projects centred on 1:14 curtainside vehicles.
Tyres & rims
1:14 Tire Insert 20 mm, model accessory
500907517€11.79
This 1:14 tire insert in 20 mm format is a dedicated model accessory for Carson references 907012 and 907612. The foam ring sits inside the tyre and provides the internal support that helps the casing hold its shape more evenly while the wheel is in use. Its circular form with a large centre opening is made for placement as an inner support element rather than as an external wheel part. That makes it a useful choice when an existing insert has worn down, when a wheel and tyre set is being rebuilt, or when compatible running gear is being prepared as a spare setup. The stated 20 mm size gives a clear fit reference, while the 1:14 scale keeps the application focused on matching model vehicles. As a replacement component, it serves a precise workshop role in maintenance and setup work. In practice, inserts like this are fitted during tyre assembly to support the tyre from within before the wheel is run again. That makes them relevant for bench work, parts sorting and routine upkeep of compatible 1:14 models, especially where a direct fit for 907012 or 907612 is required.
Tyres & rims
1:14 Tire/Wheel-Set LowLoad Fulda/SAF
500907141€47.99
In 1:14 scale, the Tire/Wheel-Set LowLoad Fulda/SAF adds a distinctly commercial vehicle character to compatible model builds. The combination of black treaded tires and silver-grey wheel parts creates the look of a working truck or trailer axle setup, while the LowLoad, Fulda and SAF designation gives the set a clear enthusiast focus. The set is shown with separate tire and rim elements, along with small metal ball bearings and screws for assembly. That layout supports a more involved workshop-style build, where the wheel units are fitted together step by step rather than supplied as a single molded piece. The tread texture gives each wheel a defined surface look, and the included bearings support the rotating function once installed. For model builders, this makes the set suitable both for replacement work and for adding more specific wheel detail to an existing 1:14 vehicle project. On the bench, the individual components suit careful fitting and setup work. Once mounted on a compatible model, the assembled wheels contribute to the overall scale impression of the chassis and help complete a truck or trailer build with matching running gear detail.
Basic accessories
1:14 Towing bar Low loader, model accessory
500907627€26.99
This 1:14 towing bar for the Low loader adds a defined structural part to scale model work, with a black moulded form that follows an A-shaped layout and integrates reinforcing ribs across the frame. The geometry shown in the part itself points to a mechanical connection role, with 1 circular mounting eye on one end and 2 cylindrical mounting points on the other for placement in the intended assembly. As a dedicated model accessory in the Models & Accessories range, the part suits replacement work, maintenance tasks or the completion of an existing 1:14 Low loader setup. The ribbed structure gives the component its formed profile, while the open triangular shape keeps the connection points clearly accessible during fitting. For hobby projects where the correct shape matters, a scale-specific part like this helps keep the model configuration consistent with the intended layout. The 14 Years age marking places the towing bar in the hobby segment rather than in early-play ranges. It fits naturally into bench work focused on repair, parts management and scale vehicle upkeep, whether the aim is to replace a worn component or keep a matching spare ready for later use.
Basic accessories
1:14 Towing Bar Trailer, model accessory
500907626€26.99
The 1:14 Towing Bar Trailer is a model accessory with a clear utility-focused shape for scale vehicle and trailer projects. Its black moulded form combines a long drawbar arm, a circular eyelet and a broad triangular centre panel, creating a part that reads immediately as a towing or linkage component within a larger assembly. The centre section carries a raised diamond-plate texture that gives the surface an industrial look suited to working vehicle scenes and technical model layouts. Along one side, small mounting tabs with holes add further fastening points, while the two extending arms end in compact connector joints for attachment within a compatible structure. This combination of eyelet, tabs and connector ends supports use as a linking, hinging or stabilising element, depending on the model setup described by the builder's own project. The 1:14 scale keeps the part aligned with matching scale builds where proportion matters. In workshop-style rebuilds, replacement jobs or custom trailer configurations, this accessory brings a distinct mechanical detail to the assembly. It suits hobby benches where individual components are selected for fit, function and scale appearance rather than as stand-alone display pieces.
Basic accessories
1:14 Tractor Truck Taillights, accessory
500907038€19.49
Heavy road tractors are defined by the details at the rear, and this 1:14 taillight set brings that scale character into a truck build with a 6-section layout and a matched pair of rear lights. The compact housings suit model projects where the back end needs the same visual attention as the cab and chassis. Each set contains 2 taillights, making it suitable for left and right mounting on compatible 1:14 tractor truck models. The 6-section design gives the rear lighting area a more structured look than a plain single-piece lamp and helps complete the visual language of a scale truck body. The parts are intended for trucks and can be illuminated, which opens the door to more advanced finishing work when a build calls for functional light detailing. As an accessory in the models and supplies category, the set fits naturally into custom builds, replacements, or visual upgrades. On a workshop bench, the pair works well for refreshing an existing rear section or adding a more defined light arrangement to a new truck project. In a display setting, the segmented layout supports the realistic look that model-building enthusiasts often want from a 1:14 road vehicle.
Models & trailers
1:14 Trailer Chassis 20/40ft.Cont., trailer
500907348€399.99
Built around a CNC-milled aluminium frame with a black anodised finish, this 1:14 Trailer Chassis 20/40ft.Cont. brings container transport into a detailed scale format with a long 915 mm silhouette and a purposeful commercial-vehicle look. The 190 mm width and 140 mm height give the chassis a low, stretched profile that sits naturally behind a matching tractor unit in workshop, display or driving scenes. The 3-axle layout is paired with swing axle suspension and flat springs, so the undercarriage carries visible mechanical depth as well as articulated movement. Wide-base tyres with foam inserts add body to the running gear, while chrome-plated rims sharpen the road-going finish. Mechanical seat posts extend the functional trailer character beyond surface styling, and the changeable container fastening allows the chassis to be set up for 20 ft or 40 ft container formats. Age marking: 14 years. Behind a tractor unit, the long frame and multi-axle arrangement create the look of a working freight combination with clear transport focus rather than a generic road trailer. The chassis suits model-building enthusiasts who enjoy realistic commercial vehicle themes, detailed underframe construction and scale scenes centred on loading, hauling and depot movement.
Basic accessories
1:14 Trailer Door Hinge, accessory, 270° set
500907142€16.99
Trailer bodies and transport builds gain a more functional finish with this 1:14 door hinge set for model trailers. The 270° hinge design supports door movement far beyond a simple open-and-close action, making it suitable for builds that aim to show realistic access points and working rear or side doors. The set is supplied as 6 hinges and, according to the pictured contents, also includes matching mounting parts, dark hinge pins and silver countersunk screws for installation. That combination gives model builders the core hardware for fitting articulated doors on a trailer body while keeping the mechanism compact around the mounting point. The countersunk screw format helps the fittings sit neatly against the surface, and the separate pin construction forms the hinge axis during assembly. With a 1:14 scale match, the set suits trailer projects in that scale where door function is part of the visual and mechanical detail. This accessory works well for replacement jobs on existing models and for custom trailer construction where opening panels add realism to the finished vehicle. Age marking: 14 Years. Assembly is required as part of fitting the hinges to the chosen model.
Basic accessories
1:14 Trailer Door Locking Set, model accessory
500907356€37.99
Trailer hardware is one of the details that gives a scale build its finished character, and this 1:14 Trailer Door Locking Set focuses exactly on that area. Made for 1:14 trailer models, the set adds dedicated door locking parts that bring more structure and realism to the rear section of a trailer build. The set includes several small locking elements on sprue frames, along with rods, linkage-style bars and screws for assembly. These separate parts create a mechanical layout that can be mounted onto trailer doors and connected across the door area, so the locking setup reads as a purposeful piece of model hardware rather than a moulded surface detail. The black finish keeps the appearance clean and technical, which suits utility trailers, transport builds and workshop-focused custom projects. As an accessory set, it also opens up extra scope for refining an existing model with more visible functional detail. On the bench, the parts suit careful fitting and staged assembly; on the finished trailer, they sharpen the look of the rear doors with a more complete scale presentation. Age 14 Years.
Basic accessories
1:14 Trailer Fog & Backup Light, model accessory
500907077€18.99
A rear fog light and backup light are standard visual cues on full-size trailers, and this 1:14 set brings that same workshop detail to a scale build. The accessory is designed as a 1+1 combination, adding 1 fog light and 1 backup light to the rear section of a model trailer with a clean, functional look. The set uses separate clear and red lens parts, metal mounting pieces and screws, so the finished assembly gains both colour contrast and defined hardware detail. That mix of components suits builders who want to refine the rear view of a truck or trailer rather than leave the bodywork plain. The compact parts can be integrated into a new project or used during a conversion, where the extra lighting details help the rear panel look closer to a working road trailer. The 1:14 scale keeps the proportions aligned with matching commercial vehicle models and trailer bodies. Mounted at the back of a trailer, the light units add a realistic finishing touch beside mudguards, rear bars or panel sections. On a display build, they sharpen the technical look of the rear end; on a custom project, they provide a focused upgrade that fits naturally into detailed scale transport scenes. Age marking: 14 Years
Basic accessories
1:14 Trailer Hitch with Pole, RC accessory
500907182€59.99
A trailer hitch changes the whole character of a scale truck build, turning the rear section into a working connection point with a more authentic mechanical layout. This 1:14 Trailer Hitch with Pole for RC and mechanical models brings that function into the build with a compact black assembly that focuses on coupling detail and realistic rear-end hardware. The set centres on a hitch mechanism with a pivoting bracket, a long lever arm and a rectangular mounting plate, supported by screws, nuts and a metal washer for installation. The linkage layout creates a clear mechanical connection that suits trailer use and adds visible function to the chassis area. In close view, the assembly gives the rear section a more technical appearance through its articulated parts, mounting points and drawbar-style structure. The black finish keeps the look consistent with underbody components and commercial vehicle hardware often seen on scale truck models. Age marking: 14 years+ Mounted at the rear of a truck or trailer build, the hitch supports scenes with coupled transport setups, workshop detailing or display arrangements that focus on utility vehicles. It also suits hobby projects where the rear mechanism matters as much as the bodywork, giving the model a more complete working layout in 1:14 scale.
Basic accessories
1:14 Trailer License Plate Bracket Accessory
500907034€13.49
A trailer rear section gains a more complete scale look with this 1:14 license plate bracket accessory, shaped for model-building enthusiasts who refine the details of trucks and trailers. The bracket comes with 2 rubber buffers and is prepared for lighting, adding a functional base for rear-end finishing on compatible builds. Its stated compatibility covers vehicles and trailers in 1:14.5 and 1:16 scale, which makes it useful across more than one workshop project. The included mounting material supports straightforward fitting on the rear section, while the bracket format suits builds that need a dedicated place for a license plate assembly rather than a generic improvised mount. The combination of bracket form, rubber buffers and lighting-ready layout gives the rear area a more technical, road-going appearance in scale form. On a detailed tractor unit and trailer combination, the part helps complete the visual line at the back of the model. It also suits restoration work, upgrades, or fresh custom builds where the rear assembly needs a defined finishing component. Age 14+
Basic accessories
1:14 Trailer Mud Guard Set, accessory, straight
500907036€22.49
Trailer details shape the finished look of a scale truck, and this 1:14 Trailer Mud Guard Set adds that functional bodywork with 4 straight fenders for semitrailer chassis and custom builds. The set is arranged as 2 left-side and 2 right-side parts, creating a balanced layout around the wheel area while keeping the build aligned with common trailer proportions. Each mud guard is supplied with mounts and mounting hardware, and the M3 thread specification gives a clear basis for installation on compatible frames. The straight form suits projects that call for a clean, utility-led line along the trailer section rather than a curved or stepped profile. The black moulded parts shown in the set carry ribbed surface detailing, which helps the wheel area read as a purposeful working component on truck and transport models. Suitability for both 1:14 and 1:16 trailers also makes the set useful across more than one scale workshop setup. On a replacement build, the 4-piece layout restores a complete left and right arrangement in one go. On a scratch-built hauler or modified semitrailer frame, the included hardware supports a direct route to fitting the guards and integrating them into the chassis layout. Age 14+
Basic accessories
1:14 Trailer Mud Guard, accessory set, 2-piece
500907137€28.99
On a 1:14 trailer, the mud guards shape the wheel area and sharpen the finished outline of the build. This 2-piece set provides 2 matching trailer mud guards in black, giving model-building enthusiasts a straightforward way to replace missing parts or complete a trailer with the correct wheel-arch coverage. Each guard uses a curved form that sits over the wheel section, while the moulded tabs create defined mounting points for fastening. The set also includes 4 spacer bushings, 4 screws, 4 washers and 4 hex nuts, matching the visible attachment layout needed for fitting both parts. The black finish keeps the look uniform across the pair, and the identical left-right format supports a balanced appearance once mounted on the trailer. Whether a workshop build needs replacement body parts or a trailer project is being completed from individual components, this accessory set adds the specific hardware and shaped guards needed for the job. The age marking is 14 years, and the set is intended for model and accessory use within the 1:14 scale range.
Electronics
1:14 Trailer Side Marker, model accessory
500907382€34.99
Side marker lights are part of the visual language that gives a scale trailer its convincing road-going character. This 1:14 set is made for model trailer lighting layouts and runs on 7.2 to 12 V, fitting common electrical setups used in hobby truck builds. The set consists of 2 orange side markers with attached wiring, shown with red and black leads for straightforward polarity recognition during installation. Their compact format suits placement along the trailer sides, where marker lights define the outline more clearly and add a technical finishing touch to the body. As an electronic accessory in the Models & Accessories range, this set is aimed at hobbyists working on custom truck or trailer electrics rather than a complete ready-to-run vehicle. The 14+ age marking is stated in the product data. Used on a workshop build, a display trailer or a running road rig, the lights add a small but noticeable scale cue once connected to a suitable power system. They also work well when an existing trailer setup needs replacement marker units in a matching 1:14 format.
Basic accessories
1:14 Trailer Splash guard Set, model accessory
500907183€30.99
In 1:14 scale, the Trailer Splash guard Set adds a purposeful trailer detail that sharpens the look of a compatible model build. The black parts use a long rectangular shape with rounded corners, creating a clean technical line that sits naturally on trailer assemblies. Each guard piece shows 4 evenly spaced circular holes along the upper edge, indicating a defined mounting pattern for attachment on suitable trailer sections. That layout gives model-building enthusiasts a concrete starting point when planning placement and alignment within a custom trailer project. The flat panel form keeps the visual effect restrained and functional, which suits workshop, transport, and utility-style model themes. As a dedicated accessory rather than a complete vehicle, the set is aimed at builds where small exterior details shape the finished overall impression. The splash guards fit especially well into trailer projects that need added body detailing around the wheel area or rear section. Combined with other 1:14 components, the set supports a more resolved scale appearance for display builds, workshop sessions, or careful model upgrades.
Basic accessories
1:14 Trailer Support Legs, model accessory, 73 mm
500907375€40.99
Scale truck trailers gain a crisp workshop-style detail with these 1:14 aluminium support legs in a 2-piece set. Each leg measures 73 mm and is shaped as a compact metal assembly, making the pair a focused addition for trailer builds where scale proportion and hardware detail both matter. The aluminium construction gives the parts a precise machined appearance that suits technical model projects. Based on the visible component layout, each support leg combines a rectangular bar, a cylindrical sleeve, a rod and a round end disc, creating a defined mechanical look for installation on a matching trailer setup. The pair format supports symmetrical fitting on both sides of the trailer assembly, which helps maintain a consistent appearance across the underframe. Age marking: 14 years. In a workshop build, these support legs fit naturally into 1:14 trailer detailing, whether replacing existing parts or refining a custom scale rig. The 73 mm size keeps the specification clear for planning around compatible trailer dimensions, while the metal finish adds a purposeful visual accent to the completed model.
Basic accessories
1:14 Trailer Taillights, accessory, 7 sections
500907037€19.49
Rear lighting is one of the details that gives a scale trailer its finished road-going look, and this 1:14 taillight set brings that detail into compact model dimensions. The set includes 2 trailer taillights with a 7-section design, giving the rear end of a model trailer a more technical and realistic appearance while keeping the layout suited to scale builds. Each light unit measures 32 mm in length, 12 mm in width and 7 mm in height, making the set suitable where rear crossmembers and mounting areas offer limited space. The format works with trailers in 1:14 and 1:16 scale, so the lights can be used on new builds as well as on replacement or upgrade projects. The 7-section arrangement adds a structured rear-light look that suits transport trailers, utility trailers and other detailed model applications. Prepared for lighting, the parts also support builders who want to integrate illuminated rear functions into the trailer setup. Mounted at the rear of a scale trailer, the pair helps complete the visual balance of the chassis and bodywork with a component that belongs exactly where model builders expect it. For workshop upgrades, restoration projects or fresh custom assemblies, these taillights add a precise finishing detail without taking up much installation space.
Basic accessories
1:14 Trailer Underride Guard, accessory, 240 mm
500907079€41.99
On full-size trailers, underride protection is part of the functional silhouette beneath the bodywork. In 1:14 scale, this Trailer Underride Guard transfers that same lower-frame detail into a dedicated accessory set with a 240 mm format for model trailer projects. The set is built around metal rails and matching brackets, creating a technical add-on that suits transport-themed builds with visible chassis structure. Pre-drilled holes in the parts support measured placement on the trailer frame and help keep the left and right sides consistently aligned during fitting. The silver-coloured finish works naturally with ribbed trailer panels, dark underframes and chrome-look wheel details often seen on road-going trailer models. Included screws, nuts, washers and fastening parts provide the hardware needed for installation, keeping the focus on the fit and final appearance rather than on sourcing matching fixings. Used on a box trailer or semi-trailer model, the assembled guard strengthens the visual transition between body, underframe and running gear. Age marking: 14 years and up. For hobby workbench sessions, detailing upgrades or replacement tasks on a 1:14 trailer, this accessory adds a clear structural element with workshop-style realism.
Basic accessories
1:14 Trailersus. 8mm Lift, trailer axle parts
500907644€29.99
A 1:14 trailer model gains a more technical underbody look with this Trailersus. set and its 8 mm lift layout. Created for retrofitting existing trailer axles with dummy air springs, the set brings the suspension area closer to the visual character often sought in detailed truck and trailer builds. The package contains the necessary moulded parts and 2 air bellows for the conversion. It is intended for use with dummy air springs 500907069, while the metal parts and the assembly material are reused from the existing axle. That setup keeps the focus on the suspension components that change the appearance of the axle assembly, rather than replacing the complete axle hardware. The black moulded parts suit workshop-style builds, restoration projects, and scale trailer customisation where the axle zone is meant to look more complete. One set is required for each trailer axle, which helps when planning a single retrofit or equipping several axles on a longer trailer. The 14 Years marking is stated in the product data. In a display build or a running truck-and-trailer combination, the conversion adds a more model-focused finish to the area beneath the trailer body.
Tyres & rims
1:14 Trailerwheel, wheel rim, silver wide tire
500907026€17.49
In 1:14 truck modelling, the right wheel hardware shapes both the stance and the accuracy of a trailer build. This trailer wheel rim is made in silver and is designed for wide tyre applications, giving semi-trailer projects a scale-correct base with a clean commercial vehicle look. The rim is made of plastic and is constructed specifically for Fulda wide tyre 500907012. Its form supports the tyre properly and matches the requirements of wide trailer wheel setups used on detailed model transport combinations. The part is suitable for all axles of Tamiya semi-trailers, which makes it a practical choice for replacement work, ongoing workshop projects or planned trailer configurations within that platform. The silver finish works well on road-going trailer builds where a realistic wheel appearance matters alongside fit. The set contains 2 wheel rims, making it suitable for one trailer axle pair. In a workshop setting, the pair can be used to refresh an existing trailer or complete a new axle assembly with matching wheel width and finish. Age 14+
Basic accessories
1:14 Traktor Truck fire drencher, accessory
500907123€8.99
Scaled accessories often decide whether a truck build looks merely assembled or fully equipped. This 1:14 Traktor Truck fire drencher adds that final workshop-style detail, bringing a service-oriented look to model trucks and trailers through a compact exterior attachment. The accessory is supplied as a kit and is designed for universal attachment across 1:14 model trucks and trailers. That makes it useful both for a fresh build and for upgrading an existing rig with an extra equipment point on the body or side area. Decals are included to refine the assembled part with printed detail, helping the finished fitting sit more naturally within a scale vehicle layout. The focus stays on visual realism rather than on a large conversion, so the fire drencher works as a small component with a clear effect on the overall appearance. Mounted on a truck or trailer, the accessory suits workshop, service, utility or emergency-style model scenes where exterior equipment helps define the vehicle's role. The 14 Years marking fits hobby-focused use, and the compact format makes the part easy to integrate into custom detailing plans across different 1:14 setups.
Basic accessories
1:14 Truck Alum. Coupler Plate, model accessory
500530918€53.99
Truck models in 1:14 scale rely on hardware that fits the chassis layout with accuracy, and this aluminium coupler plate set is built around that need. The set combines a large machined plate, a smaller matching bracket and 5 screws, creating a dedicated mounting solution for detailed truck builds. The main plate has a rounded open centre, several drilled holes and curved slots that allow the mounting position to be set with care during installation. Countersunk holes support a flush screw fit, while the shaped cut-outs keep the assembly compact around the surrounding structure. The second metal part adds a separate fastening point with its central circular opening and additional mounting holes, giving model builders another defined connection element within the same setup. The silver finish and machined surfaces match the technical character of scale truck components without adding unnecessary bulk. On a workshop bench, the set suits rebuilds, upgrades or replacement work where a coupler mounting point needs a clean mechanical layout. In a finished 1:14 truck, the shaped plate and bracket integrate as functional hardware that supports a tidy, purposeful chassis installation.
Tyres & rims
1:14 Truck Front Wheel, model accessory, chrome
500907061€26.49
Heavy truck models gain a more defined front end with these 1:14 Truck Front Wheel rims in a wide format and chrome finish. Designed for TAMIYA trucks, the rims fit the front axle and bring a bright metallic surface together with a deeper wheel profile that stands out clearly on road-going tractor units and custom show builds. The set contains 2 matching rims, making it suitable for the left and right side of the front axle without mixing styles or widths. The wheel face uses a large central hub opening and a ring of small bolt holes, details that echo full-size truck wheel design and give the axle area a more technical appearance. The wide format changes the visual presence at the front of the model, while the reflective finish catches light across the dish shape and hub area. Recommended tyre: Fulda, item 500907012. This accessory suits restoration work on an existing truck, a visual refresh during a rebuild, or a more defined wheel setup on a new 1:14 project. On display shelves and on the running model alike, the chrome rims add a clean truck-specific finish to the front axle.
Tyres & rims
1:14 Truck Front Wheel, rim, wide ABS
500907013€17.49
Truck models in 1:14 scale rely on axle-specific parts, and this wheel rim set is made for that exact role. The 2 wide front wheel rims are intended for truck front axles and give compatible builds a dedicated replacement or upgrade part with the correct format for the front end. Each rim is made from ABS and uses a wide profile that is constructed for the Fulda wide tire 500907012 named in the product data. The gray finish suits technical truck builds, while the molded form shown on both rim faces highlights the hub opening, bolt-hole styling and reinforcing spoke structure on the inner side. That combination makes the set useful both for restoring an existing model and for assembling a front axle setup with matching wheel hardware. Compatibility is stated for all front axles of Tamiya trucks, which places the rims clearly within established 1:14 truck model projects. In workshop use, the 2-piece contents support a paired front-wheel installation, whether the goal is replacing worn rims, preparing a rebuild, or completing a truck chassis with axle-correct wheel components.
Basic accessories
1:14 Truck Lighting Parts and Bulbs Accessory
500013512€8.79
Truck models gain a more complete road-going look with this 1:14 lighting parts and bulbs set, created for detailed commercial vehicle builds and scale-focused workshop updates. Suitable for all Tamiya trucks, it brings together key light components in a format that fits established 1:14 truck projects. The set contains 5 items for lighting work, making it a practical addition when a build needs replacement lamp parts or extra visual detailing. The included parts support careful fitting on truck bodies and help extend the finishing stage beyond the main chassis and cab assembly. For model-building enthusiasts, that added detailing work is part of what gives a truck project its individual character, especially when matching the look of working road vehicles in miniature form. On a fresh build, the set can be used while planning body details and final exterior trim. On an existing model, it supports repair work or a visual refresh when worn or missing light parts need to be replaced. Age 14 Years Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Truck Mirror & Horn Set, truck accessory
500013513€8.79
Chrome-style exterior details are part of the visual language of classic show trucks, and this 1:14 Truck Mirror & Horn Set brings that look into scale model work with parts sized for 1:14 truck projects. The set is suitable for all Tamiya trucks and focuses on visible cab details that change the character of a finished build. The contents include 2 horns and 2 rearview mirrors, giving both sides of the cab matching components rather than a mixed add-on approach. As separate model parts, they suit hobby builds that are assembled and finished by hand, whether the goal is a cleaner stock-style truck or a more individual custom setup. The mirror pieces add a familiar cab outline, while the horn parts extend the roofline detail often seen on road-going trucks. The set is intended for model enthusiasts working at 1:14 scale and the age marking is 14 Years. This accessory set fits naturally into new truck projects, rebuilds and visual updates where exterior details make the difference between a basic shell and a more complete road-truck appearance. It also works well when replacing missing trim parts or when giving an existing Tamiya truck a sharper, more finished cab profile.
Basic accessories
1:14 Truck Steering Rod, model accessory, steel
500013516€8.49
A 1:14 truck model gains a focused steering upgrade with this steel steering rod, made for the steering linkage on compatible tractor units. The shaped metal part uses threaded ends for installation into the linkage position, giving model-building enthusiasts a dedicated component for refining the steering setup on an existing build. The rod is intended for the Mercedes Benz 56305 and Volvo FH 12 56307 tractor models from TAMIYA. Its bent profile and elongated centre section match the function of a linkage part that connects within the steering system rather than serving as a decorative add-on. As a single replacement or optimisation component, it suits workshop-style maintenance, parts renewal or selective tuning where the steering assembly is being revised. The included instruction manual supports fitting, while the steel construction keeps the focus on a functional mechanical part for the model. On the bench, this accessory fits naturally into a rebuild, repair or upgrade session centred on the front steering mechanism. In a finished 1:14 truck, the steering linkage remains one of the key areas for model builders who want the mechanical setup of the tractor unit to stay precise and purpose-built. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Truck Trailer Taillights, model accessory
500907039€19.49
Rear lighting is one of the details that gives a scale truck or trailer its finished character, and this 1:14 taillight set focuses exactly on that visual signature. The round 3-section design brings a recognisable commercial-vehicle look to the rear end of a model and suits builds that aim for a more complete road-going appearance. The set is made for 1:14 truck and trailer applications and contains 2 matching light units. Each lamp uses a round format with a red outer lens area and a central amber section, echoing the layout seen on full-size rear combination lights. That makes the pair a useful choice for body upgrades, replacement work, or fresh custom projects where the rear panel needs scale-correct lamp details. The matching format helps keep the left and right side visually consistent, which matters on trailers and tractor units with exposed rear bodywork. Mounted on a truck chassis project, a trailer rear frame, or a custom body section, these taillights add a small but noticeable finishing touch. They suit workshop-style builds where the final impression depends on realistic components rather than broad styling alone. Age marking: 14+
Basic accessories
1:14 Truck Wheel Axle, model accessory, steel
500907091€18.29
Built for 1:14 truck models, this Hi.Precision wheel axle brings a focused steering upgrade to the front end of the chassis. The steel construction and dedicated axle format place the emphasis on cleaner wheel guidance, with the stated purpose of improving steering on TAMIYA trucks. As a model accessory rather than a complete vehicle, this part fits naturally into workshop-style upgrade projects where the steering system is being refined component by component. The 1:14 scale keeps it aligned with truck model builds in that format, while the steel material adds a clearly defined mechanical element to the setup. The Hi.Precision designation points to a more exact steering response, making the axle relevant for builders who want a more controlled feel in directional inputs. The age marking is 14 years and up. In use, the axle suits detailed truck scenes, driving sessions and chassis tuning where front-wheel accuracy has a visible effect on how the model tracks through turns. It also works as a targeted replacement when a build calls for a steering-focused hardware change instead of a visual add-on.
Basic accessories
1:14 Underride Guard, trailer accessory, mount
500907366€47.99
In 1:14 scale, this underride guard assembly adds a distinct commercial-vehicle detail to a dump trailer build. The metal crossbar with its 2 upright mounting brackets gives the rear section a more technical, model-accurate appearance while fitting the visual language of working trailer equipment. The assembly combines a tubular bar with perforated brackets, rear tabs and an elongated slot for fastening. That layout provides several fixing points for installation and supports more exact alignment on the trailer frame. The visible hole pattern and bracket geometry also make this part stand out as a functional scale component rather than a simple trim piece. For model-building enthusiasts, details like the upright supports and the structured mounting points help carry the look of a dump trailer through to the rear end. Used in a workshop build, during a trailer upgrade or as part of a scale-focused finishing stage, the underride guard adds another layer of hardware detail to 1:14 commercial vehicle projects. Age 14 Years
RC truck accessories
1:14 UNI-TLS IR, transmitter unit, low loader
500907711€84.99
Heavy-haul trailer functions become far more precise with the 1:14 UNI-TLS IR transmitter unit, built to connect an existing lighting system to the CARSON TLS low-loader control setup. The module sends both lighting and auxiliary commands to the trailer via infrared, creating a clean control link for complex low-loader operation. Designed for third-party use, the unit expands a 1:14 electronics layout with a focused set of control options for articulated transport models. The infrared transmitting diode forms the signal bridge to the trailer control unit 500907712, which is required separately for trailer control. Alongside standard light commands, the system supports additional switching tasks for functions such as a gooseneck section, electric supports, ramp drive or steerable trailer axles. Operating voltage is 5-7.4 V DC, and power is supplied directly via the receiver. Scope of delivery includes the UNI transmitter module, IR transmitting diode, 10-pin cable set and instructions. In a workshop-style build or an active driving layout, the module suits model hauliers who want trailer lighting and moving low-loader functions to respond through one coordinated infrared link. It fits especially well into detailed truck and trailer combinations where realistic control of transport equipment matters as much as the tractor unit itself.
Basic accessories
1:14 Universal Antenna-Set, model accessory
500907603€13.99
Antenna details are a small part of a build, yet they strongly shape the finished look of a scale vehicle. This 1:14 Universal Antenna-Set brings together 5 separate antenna parts for model work, each shown in a different length or base form for use on compatible 1:14 bodies. The set covers several mounting styles, including round and tapered bases, a right-angle connector, a forked clip-style end and straight peg fittings. That mix makes the parts useful where an existing body shell, holder or mounting point calls for a specific connection style rather than a single fixed format. The black finish keeps the look neutral across different paint schemes and body designs. Because the parts vary in shape, the set can support both direct replacement work and detail-focused finishing on trucks or other scale vehicles. On the bench, the antenna parts suit restoration jobs, body refresh projects or the final detailing stage of a new build. Age marking: 14 years. The compact set also works well as a practical stock of spare fittings for hobby sessions where small exterior details need to be matched cleanly to the model.
Basic accessories
1:14 Universal tie-down-set, lowloader accessory
500907450€29.49
Heavy haul transport depends on visible securing points, and this 1:14 Universal tie-down-set lowloader brings that detail into scale form with a 300 mm load-securing chain for model trailer setups. The set is designed as an all-purpose tie-down chain for lowloader use, adding a functional-looking fastening element to cargo scenes and transport layouts. The scope of delivery combines 5 tie-down eyes, 2 cargo hooks and the chain itself, giving several separate fixing components for arranging a more believable securing pattern on a lowloader deck. In a 1:14 model environment, these parts help define how machinery, freight or construction loads are visually anchored without relying on moulded-on detail alone. The metal chain appearance adds weight and texture to the scene, while the individual hardware pieces support more deliberate placement around the trailer structure. Age marking: 14 years. On a workshop shelf, in a transport diorama or as part of a finished truck-and-trailer combination, the set adds the kind of small-scale hardware that changes how a load scene reads at a glance. It suits model-building enthusiasts who want cargo presentation on a lowloader to look more complete and more closely worked through. Warning! Not suitable for children under 14 years.
Electronics
1:14 Volvo FH16 Headlight, model light unit
500907507€109.99
The Volvo FH16 is known for its distinctive front lighting signature, and this 1:14 headlight unit brings that look into a model build with a chrome-look housing, projector-style centre lens and several integrated light points. The shaped assembly is made for Volvo FH16 model applications and adds a more defined front-end appearance once fitted. Colour-coded wires assign each lighting function directly in the installation guide: yellow for left indicator, orange for right indicator, black for driving light, pink for high beam, green for fog light, grey for daytime running light and white for cornering light. The supplied documentation also shows mirrored left and right connector layouts, which helps place each lamp module correctly on the vehicle front. A rear cover is secured over the internal board with 1 x M2x12 screw and 2 x M2x10 screws. The safety note in the data states that reversing polarity or increasing the supply voltage can damage the SMD components. This light unit suits detailed truck model projects where the front section is being repaired, upgraded or completed with the correct lamp layout. The documentation also notes a front bumper adjustment on part MF6, where 15 mm must be removed before bumper installation in the shown setup, giving model builders a clear reference for fitting work.
Electronics
1:14 VolvoFH16 Front Indicator, model spare part
500907506€65.99
The Volvo FH16 has become a familiar sight in long-haul transport, known for its modern cab design and strong road presence. This 1:14 front indicator spare part brings that truck-specific detail into a compact replacement component made for model-building enthusiasts working on compatible VolvoFH16 truck setups. The assembly combines a curved translucent light element with a twisted red and yellow cable and a protected section finished with black heat-shrink tubing. That layout supports clean routing inside a model body where space is limited and wiring needs to stay organised around the front end. The 7.2 V and 12 V specification gives a clear electrical reference for matching the part to an existing lighting system without guessing across incompatible voltage ranges. As a dedicated model spare part rather than a generic wire lead, it suits repair work, restoration projects, or detail-focused rebuilds where the original front lighting arrangement needs a like-for-like replacement. On the workbench, the compact harness format fits naturally into maintenance sessions focused on worn lighting parts or incomplete truck builds. In a finished 1:14 display or running model, the front indicator helps restore the intended look of the VolvoFH16 front section while keeping the electronics layout aligned with the model's original lighting function. Warning! Not suitable for children under 14 years.
RC truck accessories
1:14 Warning Signs LED TLS, trailer accessory
500907713€54.99
Heavy haulage details make the difference on a scale build, and these 1:14 warning signs bring that look into the trailer setup with illuminated red and white SMD LEDs. The set contains 4 warning signs ready to connect, adding a functional lighting element that suits low-loader scenes and transport-focused model layouts. The pre-wired power circuit board keeps the electrical side straightforward and is designed for direct connection to the TLS low-loader control unit 500907712. Installation uses the existing mounting points on the CARSON gooseneck low-bed trailer 500907700, which keeps the fit aligned with the intended trailer platform. Each sign measures 21 x 21 mm with a width of 71 mm, giving the assembly a compact scale presence. The extendable construction can be moved in or out by loosening the screws, so the sign position can be adapted to the width of the load. Mounted on a low-bed trailer, the illuminated signs add a convincing finishing touch to heavy transport combinations in workshop builds, display setups, and driving sessions. The 5 V/DC operating voltage matches the stated electrical specification for integration into the TLS system.
Tyres & rims
1:14 Wheel & Fulda Ecotonn+ Tire, trailer wheel set
500907006€37.99
Heavy haul trailers rely on the right wheel format, and this 1:14 wheel set brings that look into model building with Fulda Ecotonn+ tyres and double wheel rims for flatbed and low loader applications. The combination of 52 mm outer diameter, 30 mm inner diameter and 14 mm width gives the running gear a clearly defined footprint suited to detailed trailer projects. The set consists of 4 flatbed truck tyres and 2 double wheel rims with hubcaps, creating a coordinated basis for replacement work or a fresh trailer build. The rim design is prepared for retrofitting with 11 x 5 x 4 ball bearings. That layout allows 4 bearings per double rim, which is a useful detail when a model is being rebuilt with smoother wheel support in mind. The separate tyre and rim components also suit hobby work that involves fitting, upgrading and maintaining scale transport models rather than replacing a single worn part. On a workshop bench, the set fits naturally into trailer servicing, visual restoration or a custom low loader project in 1:14 scale. Age marking: 14 years and over. Whether the goal is to refresh a flatbed trailer or complete a heavy transport build with matching running gear, the dimensions and component mix keep the focus on authentic model detail.
Basic accessories
1:14 Wheel axle-Set, trailer accessory
500907158€29.99
This 1:14 Wheel axle-Set is made for Carson Trailer applications and brings a focused spare-parts solution to model workshop tasks. The set contains 6 identical axle components, each shaped with a threaded shaft and a hexagonal centre section that allows the part to be tightened with a tool during fitting. As a trailer accessory rather than a complete vehicle, the set is aimed at maintenance, replacement and parts supply within a 1:14 model setup. The matching format of all 6 pieces helps keep wheel mounting hardware consistent across the trailer, which matters when worn or missing axle parts need to be exchanged. The threaded design supports secure installation into the intended mounting points, while the central hex section gives a defined grip area for controlled assembly work. Metal construction adds the precise, mechanical character expected in model hardware. On the workbench, the set supports routine servicing, rebuilds and parts replacement on compatible Carson Trailer assemblies. Age marking: 14 Years. No batteries included.
Tyres & rims
1:14 Wheel Hub Cover, model accessory, 2-pack
500907353€8.99
These 1:14 wheel hub covers bring a neat finishing touch to compatible model builds and add a more complete look around the wheel area. Supplied as 2 pieces, the set suits hobby projects that need matching components on both sides of an axle position. As a model accessory, the set fits naturally into repair work, replacement jobs or visual detailing on 1:14 vehicle projects. The compact format makes these parts relevant where missing hub covers interrupt the overall appearance of a build or where an existing setup is being refreshed with like-for-like components. The age marking of 14 years places the set in the hobby category, aligning it with parts-based model work that calls for careful handling and accurate component choice. On the bench, these wheel hub covers can be used during a rebuild, while replacing worn parts, or when completing a scale vehicle with the final exterior details in place. In a display setting or during running sessions, matched hub details help the wheel area read as a coherent part of the finished model.
Tyres & rims
1:14 Wheel Wide Trailer Wheels, Chrome Rims
500907055€26.49
Chrome truck rims are a classic detail on full-size road trailers, and this 1:14 wheel set brings that look into a scale build with a wide format made for trailer use. The set includes 2 wide trailer wheels with a chrome finish, giving compatible models a brighter, more defined wheel appearance on the axle. The wheel design is intended for CARSON-MODEL SPORT trailers and suits rebuilds, replacements or visual upgrades where the running gear needs a fresh matching look. Each rim is specified for use with 5 x 11 x 4 mm ball bearings, which gives the assembly a clear bearing standard for fitting and maintenance. The wide profile supports the visual character expected from scale transport trailers, while the chrome surface, vent openings and shaped hub area add mechanical detail that stands out on the undercarriage. As an accessory part rather than a complete vehicle, the set focuses on wheel appearance and fit within an existing trailer setup. Mounted on a scale trailer, the 2 matching rims suit workshop-style rebuilds, custom transport combinations and replacement jobs after regular running. In display scenes or on the road behind a truck tractor, the chrome finish gives the trailer axle area a more authentic heavy-duty look.
Tyres & rims
1:14 Wheel wide, trailer wheel set, grey
500907154€17.49
A 1:14 trailer model gains a clean technical update with this wide wheel set in grey. The set contains 2 matching wheels and is shaped for trailer use, making it a useful choice for replacement work, rebuild projects or a visual refresh on an existing scale setup. The wide format gives the wheel face a fuller presence on the model, while the grey finish keeps the look neutral enough to suit many trailer styles. The visible deep rim profile adds scale character, and the inner spoke reinforcement shown on the rear view points to a construction made for model use rather than a flat display piece. Because both wheels match in colour and form, the pair supports a balanced appearance across the axle. The 1:14 scale keeps the proportions aligned with compatible trailer builds, which matters when a model is being restored or updated with consistent running gear. On workshop shelves, during maintenance, or as part of a custom trailer project, this 2-wheel set fits naturally into the parts stock for 1:14 model building. The age marking is 14 years and up.
Tyres & rims
1:14 Wide Wheel f.Tamiya Trailer, wheel set
500907053€26.49
European-style single wheels are a defining detail on many road-going trailers, and this 1:14 Wide Wheel set brings that look to compatible Tamiya trailer builds. The set contains 2 wide wheels with a chrome finish, giving the trailer a brighter rim face and a broader visual stance than a standard setup. The wheel design combines a decorative outer rim with a hex-shaped inner mount for fitting to compatible trailer axles. Circular rim openings and lug-style detailing add to the heavy-duty truck character, while the wide format is intended specifically for trailer use in 1:14 scale. Carson identifies Fulda tyres, item 500907012, as the recommended match for this wheel set when completing the conversion. Age marking: 14 years. Mounted on a show truck, road tractor trailer or custom transport build, the pair shifts the look toward a European single-wheel configuration with a more model-specific finish than plain stock rims. The set suits replacement work, visual upgrades and detail-focused trailer projects where wheel style is part of the overall build concept.
Basic accessories
1:14 Wooden EPAL Euro-Pallet, model accessory
500907608€4.59
The Euro-pallet is one of the most recognisable load carriers in modern freight handling, and this 1:14 Wooden EPAL Euro-Pallet brings that familiar transport detail into model layouts with a format that immediately reads as warehouse, depot and loading yard equipment. The wooden build and slatted top give the miniature a grounded, realistic presence beside trucks, trailers and industrial scene elements. Its shape follows the classic pallet layout with several top boards and 3 block supports underneath, creating the layered structure associated with full-size Euro pallets. Visible EUR and EPAL style markings on the front blocks strengthen the scale impression and give the accessory a more convincing logistics character in close-up display settings. The light wood finish suits freight scenes, workshop dioramas and loading areas where cargo handling details help define the setting. Placed on a loading dock, in a storage corner or beside a model truck, the pallet works as a simple scene-building element that adds context without pulling focus from the main vehicle. Age marking: 14 Years. No batteries required.
Basic accessories
1:14 Wooden Pallet-Cage, model accessory
500907609€17.49
A wooden pallet-cage is a familiar sight in freight yards, farm depots and market loading areas, and this 1:14 version brings that same working character into a model scene. The accessory combines a slatted crate body with a Europallet-style base, creating a transport detail that fits naturally into logistics, agricultural or workshop layouts. Light natural wood gives the cage a plain, realistic finish that suits weathered or freshly arranged scenes alike. Four upright corner posts frame the crate, while horizontal side slats and diagonal upper bracing shape the look of a practical storage container rather than a decorative prop. The open top leaves the interior visible and ready for individual scene planning, whether the setting calls for stacked goods, workshop materials or market cargo. The raised pallet feet add another recognisable handling detail drawn from full-size freight equipment. On a shelf, in a diorama or beside a 1:14 truck setup, the pallet-cage works as a compact scenery element that adds structure around loading zones and storage areas. Age 14 Years
Basic accessories
1:14 Wooden Tarp Hoop Set, model accessory
500907163€24.99
This 1:14 Wooden Tarp Hoop Set brings a classic transport detail into model-building work with 32 wooden hoop elements shaped for scaled construction and restoration tasks. The light wood surface and visible grain give the parts a convincing material presence, whether they are fitted into a trailer frame, adapted for a custom body section or kept ready for future workshop use. Each strip is supplied as a separate component, making the set useful for replacing worn parts, extending an existing structure or planning a fresh build with matching hoop elements throughout. The long, slim format supports careful trimming and alignment during assembly, while the natural variation in the wood keeps the finished work visually grounded rather than overly uniform. As a dedicated model accessory rather than a complete vehicle, the set focuses on one specific construction detail and leaves room for individual finishing choices. On the bench, the 1:14 scale suits transport models that call for tarp supports, frame detailing or period-style load coverage. Age 14 Years is stated for the set. In workshop scenes, diorama projects or trailer conversions, these 32 wooden parts add a practical supply of material for precise, hands-on model work.
Basic accessories
1:14 Working Light, model accessory, swiveling
500907576€6.99
This 1:14 working light brings a focused scale detail to model scenes where technical fittings shape the overall impression. The swiveling design adds movement to the lamp itself, giving the accessory a more mechanical character than a fixed light and supporting a layout that looks closer to workshop, transport or site equipment. As a model accessory, the light is suited to builds that rely on visible equipment details rather than broad body changes. The 1:14 scale makes it relevant for matching scale projects, while the swiveling function introduces a clear handling feature instead of a purely static add-on. That makes the lamp useful for hobby builds that aim to show working hardware, service equipment or utility-focused vehicle setups. The age marking in the product data is 14 Years. Placed on a truck, machine or other scale model, the light can help define the role of the vehicle within a diorama or display setting. It also fits projects where individual accessories are chosen carefully to give the finished build a more specific technical identity.
RC diggers
1:16 Volvo L260H, wheel loader, 100% RTR
500907693€369.99
The Volvo L260H is one of the best-known wheel loaders on large construction sites, and this 1:16 RC version brings that machine character into a fully functional ready-to-run format. At 530 mm long, 204 mm wide and 212 mm high, the model carries the broad stance and working proportions of the original into a format that gives the bucket action real presence. The 4110 g wheel loader combines scale detail with a drivetrain built for active operation. A battery holder sits under the engine hood, keeping the 7.4 V 1500 mAh Li-Ion drive battery neatly integrated into the body. The detailed driver's cabin includes an opening door, adding another layer of realism to the exterior. Sound and light functions extend the machine feel during operation, while the true-to-original wheel loader tyres match the construction styling with a tread pattern suited to the model's working look. The radio system uses 2.4 GHz technology and 10 channels for precise command input across the loader's driving and function controls. Running time reaches 60 minutes, giving the model enough time for longer loading sequences, repeated manoeuvres and display-worthy driving sessions. On a floor, paving or a compacted play surface, the combination of scale dimensions, functional bucket action and machine-style steering creates a focused RC construction experience. Warning! Not suitable for children under 14 years.
- 21 %
Mini RC cars
1:50 Nano City Crane Truck, RC truck, 2.4 GHz
500907682€18.99
Construction crane trucks bring compact utility engineering into motion, and this 1:50 Nano City Crane Truck translates that character into a radio-controlled format with a realistic crane truck appearance, a detailed driver's cab and LED lighting. At 135 mm long, 60 mm wide and 90 mm high, the model fits neatly into indoor driving spaces while still carrying the proportions and working look of a mobile crane vehicle. The interference-free 2.4 GHz remote control system supports precise handling across the truck's compact 146 g format, making short direction changes and careful positioning easy to manage. A 3.7 V Li-Ion drive battery with 500 mAh capacity powers travel times of up to 40 minutes, and the included USB charger keeps the rechargeable setup straightforward. The crane tower can be rotated manually through 360°, while the outriggers can be adjusted manually in both height and length to change the truck's stance for different scenes. That combination suits floor-based routes, desk-edge manoeuvres and small construction layouts where the truck can drive into place, extend its supports and turn the crane into position. With the ready-to-run model, remote control, battery, charger and instructions included, the set focuses on compact RC driving with a functional crane feature and a strong city-service look.
- 21 %
Mini RC cars
1:50 Nano City Garbage Truck, RC car, 2.4 GHz
500907683€18.99
Utility trucks are a familiar part of the city scene, and this 1:50 Nano City Garbage Truck brings that working-vehicle character into a compact radio-controlled format. At 135 mm long, 60 mm wide and 76 mm high, the model combines a small footprint with a clearly defined body shape and a detailed driver's cab. The ready-to-run set includes the model, a 2.4 GHz remote control, a Li-Ion drive battery rated at 3.7 V and 500 mAh, a USB charger and instructions. With a weight of 146 g, the truck stays light in hand and easy to place on the floor between runs. The 40 minute runtime supports longer driving sessions without frequent charging breaks, while the radio system keeps the control link focused on the vehicle during each manoeuvre. LED lighting adds another functional detail to the body, and the rubber tires support controlled movement with their non-slip contact patch. The compact scale suits indoor routes across hallways, living spaces or a cleared play area, where the truck can weave around furniture legs, follow improvised collection rounds or line up with other city-themed vehicles. Between runs, the true-to-original design and utility-truck proportions also give the model a neat display presence on a shelf or desk.
Mini RC cars
1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz
500404336€17.99
The Lexus LX570 appears here as a compact 1:60 Nano Racer with radio-controlled handling and a body shape that carries the full-size SUV's presence into a format just 79 mm long. At 33 mm wide, 22 mm high and 25 g in weight, the model stays light and easy to place on tables, smooth floors or short indoor courses. The 2.4 GHz control system supports stable command input across a range of 15 m, while the handset combines driving control with a built-in charging connection. A 1.2 V 80 mAh NiMH drive battery is included, and the ready-to-run format means the main components are already in place for immediate use. The official Lexus licence anchors the styling in the real vehicle, giving the front end and overall proportions a recognisable road-going identity. Included contents are the ready-to-run model, remote control with charging connection, NiMH drive battery, screwdriver and instructions. With up to 10 minutes of driving time, the Nano Racer suits quick laps across a desk, short obstacle layouts or side-by-side sessions with other mini RC vehicles. The ability to operate up to 50 vehicles simultaneously also opens the door to compact group racing without the control system getting in each other's way.
Mini RC cars
1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz
500404337€17.99
The Lexus LX570 appears here as a compact 1:60 Nano Racer with a licensed body shape, combining SUV styling with radio-controlled driving in a format that measures just 79 mm long, 33 mm wide and 22 mm high. At 25 g, the small chassis stays light in hand and easy to place on short indoor routes, from table-edge slaloms to quick floor runs around everyday obstacles. The set comes as a ready-to-run model with a 2.4 GHz remote control unit, a 1.2 V/80 mAh NiMH drive battery, a screwdriver and instructions. The controller includes a charging connection, so the vehicle can be charged directly through the handset rather than through a separate dock. That compact charging setup keeps the driving system together in one place and suits spontaneous sessions when only a small space is available. The 15 m range gives enough distance for controlled manoeuvres across rooms, while the radio system allows up to 50 vehicles to run simultaneously for club-style races or family competitions. Its small scale makes the Nano Racer easy to store between runs and simple to bring out for short RC sessions without a large driving area. On smooth indoor surfaces, the Lexus LX570 shape and mini dimensions create a neat balance of display appeal and active use, whether the focus is solo driving or lining up several cars for close-quarters racing.
RC buggys
1:8 Akuma Buggy, RC car, 4WD RTR pink
500409083€399.99
The 1:8 Akuma Buggy brings 4WD traction, brushless power and a bold pink body shell into a ready-to-run off-road setup built for fast runs on dirt, gravel and uneven ground. With a length of 505 mm, a width of 365 mm, a height of 220 mm and a weight of 3909 g, the chassis carries the broad stance and substantial footprint that suit buggy driving beyond smooth surfaces. A 100A drag-style ESC for 4S operation works with the 2050 Kv 3-pole brushless motor, while the cooling fan and aluminum motor heatsink support the electronics during hard acceleration. Steering input is handled by a 20 kg waterproof servo with metal gears, and the adjustable aluminum steering plate adds another tuning point at the front end. The XT90 high-current connector system and quick-change battery mount with Velcro strap keep battery swaps straightforward between runs. Splash-proof electronics and a 3-position adjustable rear spoiler round out a layout aimed at outdoor use. The included Expert Charger Twin LiPo USB-C charges two 7.4 V LiPo batteries simultaneously at 2A each, matching the supplied 2 x 7.4 V 3800 mAh drive packs. A 10 minute ride time suits short, fast sessions on compact tracks, open gravel areas or backyard jumps, with the color-printed body keeping the Akuma look clear at speed. Age 14+ Warning! Not suitable for children under 14 years.
RC buggys
1:8 Rock Wilder, RC car, 100% RTR
500404258€174.99
The 1:8 Rock Wilder RTR brings large-scale off-road driving into a 530 mm chassis with a 355 mm width and 220 mm height, giving the model a broad stance for rough terrain. Its yellow and red bodywork pairs with a type 550 brushed motor and a red anodized aluminum motor heat sink, combining strong drive output with a component setup shaped for sustained running. A quick-change battery mount shortens stops between packs, and the included 7.4 V 3000 mAh Li-Ion drive battery supplies up to 12 minutes of running time. At 2552 g, the model carries enough mass to feel planted as the suspension works across ruts, gravel and uneven ground. The solid impact-resistant front bumper takes the first contact in close running, while the 2.4 GHz radio system supports stable control without the channel conflicts common to older crystal-based sets. Age recommendation: 14 years and over. Loose dirt tracks, compacted paths and rough open ground all suit the Rock Wilder setup, especially where the long wheelbase and off-road tire format can work through changing grip levels. The ready-to-run package includes the remote control, drive battery, USB charger, 4× LR06 transmitter batteries and instructions, so the focus stays on charging the pack and heading out for the next run. Warning! Not suitable for children under 14 years.
RC models in 1:87 scale
1:87 VW Beetle Wintersport, RC car, 2.4 GHz
500504149€109.99
The VW Beetle became one of the most recognisable car shapes of the post-war era, and this 1:87 RC version brings that silhouette into a compact format with working control and winter travel character. The VW Beetle Wintersport pairs micro scale handling with a light blue body, roof rack cargo and ski-themed detailing that stands out on a layout, shelf or small driving course. Its fully proportional control gives measured steering and throttle response instead of simple on-off inputs, which suits careful manoeuvres through model scenery and narrow tabletop routes. The compact chassis works with a very small turning radius, so bends, bridge sections and tighter lane changes feel more natural in limited space. Front and rear LED lights add a clear visual cue during running, especially in dimmer room light or evening diorama scenes. Power comes from a 3.7 V 40 mAh Li-Ion drive battery, and the set includes a 2.4 GHz remote control system plus 4x AAA transmitter batteries for operation. Charging takes place through the transmitter in 45 minutes, making short pauses between runs easy to manage. The ready assembled format puts the focus on driving, collecting and integrating the Beetle into model railway settings, classic car displays or compact indoor RC sessions. Age 14+
RC models in 1:87 scale
1:87 VW T1 Samba, RC car, surfboard RTR
500504181€104.99
The Volkswagen T1 became one of the most recognisable vans of the post-war era, and this 1:87 VW T1 Samba brings that silhouette into a compact RC format with a surfboard detail and licensed Volkswagen styling. At 50 mm long, 21 mm wide and 19 mm high, the miniature format suits controlled runs on a desk, table or small indoor course where tight manoeuvres matter. The body combines detailed shaping with light blue and white paintwork, giving the Samba look a crisp period character in H0 scale. A weight of 15 g keeps the model light in hand and easy to place on narrow driving lines. The permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time, and charging takes place via the transmitter. The 100% RTR set also includes 4x AAA transmitter batteries and a storage case, so the model is ready for compact RC sessions straight away. Whether used for careful slalom runs between small obstacles or short laps across a tabletop layout, the miniature size and radio control create a focused driving setup in limited space. Age recommendation: 14 years and over.
RC receivers and accessories
6K Reflex Stick Pro 4 WP Receiver, RC receiver
500501551€42.99
The 6K Reflex Stick Pro 4 WP Receiver brings compact radio control hardware to RC vehicles and boats that need dependable 2.4 GHz signal handling in a small format. With 6 channels in a waterproof housing, this receiver supports steering, throttle and additional functions while fitting into installations where space is limited. Its housing measures 46 x 28 x 17 mm and the unit weighs 13 g, so the receiver can be positioned in many chassis layouts without taking up much room. As a replacement receiver, it is made to work with the FS 6K Reflex Stick Pro 4 and the FS 6K Reflex Stick Pro 4 LCD remote controls named in the product data. The 2.4 GHz frequency range supports stable command transmission for models that rely on precise radio response. The 6-channel layout also leaves room for more complex function control than a basic 2-channel setup. In a trail truck, work vehicle, boat or other RC build with several switchable functions, the receiver supports a tidy electronics layout and clear channel allocation. Age 14 Years+
NiMH batteries
7.2V 2500mAh NiMH Race Battery, RC battery
500608222€22.99
Built for RC vehicles and broader model building use, this 7.2 V NiMH race battery combines a 2500 mAh capacity with a Tamiya connector system in a format that fits established hobby setups. The nickel-metal hydride pack is designed as a rechargeable power source for compatible models, making it a practical choice where repeated driving sessions and regular charging cycles are part of the routine. Its specification focuses on the demands of active RC use. A maximum charging current of 2.5 A allows the pack to be charged within the stated limit, while the high current discharge characteristic supports applications that draw stronger power under load. That combination suits a wide range of electric model uses, from vehicle platforms to other model building applications that rely on a 7.2 V battery with this connector format. The pack format with bundled cells, power leads and plug connection follows the familiar layout used across many hobby systems. In use, the battery slots naturally into workshop preparation, replacement planning and regular running sessions with compatible RC models. Age marking: 14 years. Whether kept as a spare pack for longer track time or used as the main power source in a compatible chassis, it brings clear, stated electrical data to the setup.
Model helicopters
AB.205 / UH-1D SAR Helicopter Model Kit 1:48
510002845€27.49
The Italeri AB.205 / UH-1D "SAR" presents the Agusta-Bell AB-205 as a detailed 1:48 scale helicopter build, capturing the form of a multirole aircraft developed in Italy under license from the Bell UH-1 Iroquois, widely known as the "Huey." The search-and-rescue version gives the finished model a clear operational identity, with the familiar utility-helicopter layout translated into a compact display scale. The full-size AB-205 entered service in the 1960s and was developed for rapid transport into areas that were difficult to reach, a role that shaped its broad, functional airframe. The aircraft combined structural simplicity with a configuration that could be adapted for military and civilian duties, including cargo transport, medical evacuation, civil protection and search-and-rescue missions. The original helicopter had a flight range of over 500 km and a maximum speed exceeding 200 km/h, details that underline the capable design behind this replica. That background gives the model extra depth on the workbench and in a finished collection, especially alongside other rotary-wing aircraft from the same era. The AB-205 also served in the aviation units of the Arma dei Carabinieri, adding a further real-world service context to this SAR-focused subject. Warning! Not suitable for children under 14 years.
Model car kit
Alfa Romeo 8C 2300 1931-33 Model Kit 1:12
510104708€169.99
The Italeri Alfa Romeo 8C 2300 1931-33 model kit in 1:12 scale brings one of the defining sports cars of the 1930s into a 32.0 cm format with strong visual presence on the bench and on display. Its long bonnet, open 2-seat body and period racing proportions give the finished car the unmistakable character linked to the 8-cylinder supercharged original with 2,336 cc. This assembly kit is built from 320 parts, joined by 30 chromed parts and further refined with photoetched parts, screws, tubes and nylon net. The opening cowling allows the engine area to stay visible after assembly, so the highly detailed engine remains part of the finished presentation rather than disappearing under the bodywork. Steering wheels and realistic suspension add working-style detail to the structure and help the model reflect the mechanical layout of the full-size car. Rubber tires complete the wheel setup with a material and surface finish that suit a classic roadster of this era. The subject draws on the Alfa Romeo 8C line that became closely associated with international racing success and the name of Tazio Nuvolari, while this version focuses on the 2-seat Sport road car from 1931-33. With an assembly time of 600 minutes and an age marking of 14 Years, the kit suits a measured, detail-led build where body, engine and trim come together step by step into a substantial historic display model.
Model car kit
Alfa Romeo 8C 2300 Monza Nuvolari Model Kit
510004706€169.99
The Italeri Alfa Romeo 8C 2300 Monza Nuvolari model kit captures one of the best-known racing cars of the 1930s in a large 1:12 scale with a finished length of 32.0 cm. Its long bonnet, open cockpit and exposed wheel layout give the completed car a strong period racing presence, whether it stands in a cabinet or takes shape step by step on the workbench. This assembly kit is built around 100% new moulds and combines 300 parts with 30 chromed parts, photoetched parts and rubber tires. The opening cowling adds a functional display feature while also framing the highly detailed engine once the build is complete. Steering wheels and realistic suspension add further mechanical character, and the extra detailing materials such as screws, tubes, rope and nylon net widen the finishing options across the body and chassis. The included colour instruction sheet supports the long 600 minute assembly process with a clear visual guide. The full-size Alfa Romeo 8C 2300 Monza took its name from the twin-seater Grand Prix car linked to Tazio Nuvolari and the Italian Grand Prix at Monza. That racing history gives the finished replica a clear motorsport identity, especially when the body markings and trim are applied. Age recommendation: 14 Years.
Model car kit
Alfa Romeo Giulietta Spider 1300 Model Kit 1:24
510003653€37.99
The Italeri Alfa Romeo Giulietta Spider 1300 in 1:24 scale turns a celebrated Italian convertible into a detailed model kit with classic proportions and a compact finished length of 16.2 cm. The body shape, bright trim and open roadster layout give the build a distinctly early 1960s character, while the closed-roof option adds another authentic configuration drawn from the same car. This assembly kit is built around more than exterior form alone. The detailed engine gives the model a mechanical focal point, so the build is not limited to body panels and trim. Chrome parts define key accents across the car and sharpen the contrast between painted surfaces and metallic details. A colors instruction sheet supports accurate finishing choices during the 600-minute assembly process, which suits model builders aged 14 years and up. The subject itself reflects the 1962 evolution of the Giulietta Spider, when Alfa Romeo introduced bodywork updates, interior refinements and a larger 1,570 cm3 four-cylinder engine. On the bench, the 1:24 scale leaves room for careful paintwork, trim placement and engine detailing. Once completed, the 16.2 cm model sits comfortably on a shelf, in a display case or alongside other classic car builds, where the Spider profile, chrome highlights and optional closed capote give it a strong period presence.
Military aeroplane models
AMX Ghibli Aircraft Model Kit 1:72 Scale
510001460€29.99
The Italeri AMX Ghibli model kit brings a modern military aircraft into 1:72 scale with newly tooled parts, photo-etched details and markings for 4 versions. The finished build reflects the high swept wing layout of the original AMX "Ghibli", a single-engine ground attack aircraft developed through cooperation between the Italian and Brazilian aviation industries. This assembly kit is made for hands-on construction and finishing, with 600 minutes of assembly time supporting a more involved build. The aircraft represented here was developed in the 1980s to replace the Fiat G-91Y in Italian service, while Brazil also used the programme to replace the MB-326. The original aircraft used a Rolls-Royce Spey 807 engine and could reach 1,000 km/h. Italian service aircraft carried a 20 mm M61 cannon and an offensive payload of 3,800 kg, details that give the subject its distinct operational identity. On the workbench, the 1:72 format suits careful painting, decal placement and display planning without demanding excessive space. Once completed, the AMX Ghibli sits naturally in a modern military aviation collection, whether displayed as a single aircraft or alongside other late Cold War and post-Cold War jet subjects. Paints are required separately. Warning! Not suitable for children under 14 years.
Model tanks
AS 42 Sahariana Model Kit 1:72 Desert Scout
510097044€13.49
The Italeri AS 42 Sahariana model kit captures a distinctive World War II desert reconnaissance vehicle in 1:72 scale, combining compact dimensions with the purposeful layout developed for long-range operations in North Africa. Based on the chassis and mechanics of the AB 41, the original Camionetta Desertica modello 42 Sahariana was shaped for sand terrain, and that specialised role gives the finished replica its unmistakable profile. The open body, low side sections and external stowage create a build with plenty of visible structure once assembled. Fine parts for the chassis, wheels, interior elements and mounted equipment give the model a layered look that rewards careful painting and detail work. The subject is especially notable for its operational flexibility, as the real vehicle could appear with different armament configurations including a Breda 20/65 mod 1935 machine gun, a 47/32 anti-tank gun or a 20 mm Solothurn anti-tank rifle. Decals for 2 versions extend the historical finish options for the completed replica. On the bench, the 1:72 scale keeps the project manageable while still leaving room for crisp military detailing. Once finished, the AS 42 Sahariana sits naturally in a desert campaign display, a World War II vehicle lineup or a compact wargaming collection with period character and strong visual presence. Warning! Not suitable for children under 14 years.
Model trucks
Black Thunder Truck Model Kit 1:24 Scale
510090727€69.99
Black Thunder brings the customized Mack Superliner into 1:24 scale as a detailed plastic kit with a bold show-truck presence. The glossy black livery gives the finished truck a striking silhouette, while the Australian styling direction sets it apart from a standard road-going version. The full-size Black Thunder kept the original mechanical base and added tuning modifications that changed both its appearance and its engine and exhaust character. That background gives the model a clear identity during assembly, with each stage centered on a truck built around personalization rather than fleet uniformity. The Mack Superliner name also connects the subject to a vehicle that found commercial success beyond the United States, especially in Australia, where private owners and specialist body shops created highly individual machines. In model form, that context adds depth to the finished build and places the truck within a culture of custom transport design. On a shelf, in a workshop corner or as part of a transport collection, the Black Thunder theme stands out through its dark finish and event-focused character. The 14 Years+ marking and detailed kit format suit builders who want a truck subject shaped by custom aesthetics rather than standard factory trim. Warning! Not suitable for children under 14 years.
Model motorcycles
BMW R75 Military Motorcycle with Sidecar 1:9
510007403€65.99
The Italeri BMW R75 German Milit.Motor.w/Sidecar brings a distinctive wartime motorcycle to the workbench in 1:9 scale, with a finished model length of 26.7 cm that gives the sidecar layout, exposed engine and military fittings real visual presence. As a detailed assembly kit, it focuses on the characteristic engineering of the original BMW R75 rather than a simplified display piece. The full-size motorcycle entered production in 1941 after a joint BMW and Zundapp development brief aimed at using as many common components as possible for maintenance and spare-parts logistics. Its most unusual feature was the driven sidecar wheel, linked to the motorcycle through an axle system and supported by a locking differential with selectable gear ratios for on-road and off-road use. The original twin-cylinder 750 cc engine delivered 26 HP and a top speed of 95 km/h, giving the model a strong historical and mechanical background. The kit also offers decals for 4 versions, allowing the finished build to reflect different unit markings and service appearances. During assembly and finishing, the large 1:9 scale gives painted details, stencilling and weathering more room to stand out across the motorcycle, sidecar and mounted equipment. The completed model suits shelf display, diorama settings or a military vehicle collection where the combination of motorcycle, sidecar and period markings adds a different silhouette from standard armoured subjects.
Model car kit
Bugatti Coupe Napoleon 1:24 Detailed Plastic Kit
510013705€36.99
The Bugatti Coupe Napoleon arrives as a 1:24 detailed plastic kit based on the Type 41 Royale, a car built by Bugatti between 1929 and 1933 in only 6 units. In scale form, the long silhouette, formal roofline and imposing proportions give the finished build the presence associated with one of the most exclusive cars in automotive history. The source subject stands apart through its extraordinary engineering and coachbuilt identity. The original Type 41 used a shared chassis and engine across the 6 cars, while each version differed in bodywork configuration, and the Coupe Napoleon was the first in chassis order. The historical reference also names an engine displacement of over 12,000 cm3, underlining the exceptional scale of the full-size car behind this kit. Its two-tone black and blue bodywork and velvet interior are central visual cues for the build, shaping a display model that reflects Ettore Bugatti's private car and a recognised icon of world automotive production. On the bench, the 1:24 format gives room to appreciate the car's distinctive length and stately proportions as the body takes shape. Once completed, the model fits naturally into a classic car collection, a period automotive display or a line-up focused on landmark European grand touring design.
Model car kit
Bugatti Type 35B 1:12 racing car model kit
510004716€169.99
The Italeri Bugatti Type 35B 1:12 racing car model kit brings one of motorsport's defining machines into a large display scale with the long body, open cockpit and signature horseshoe-shaped radiator grille clearly expressed in the finished build. Based on the Bugatti Type 35B linked to Targa Florio and Monaco Grand Prix racing history, the model carries the character of a 1920s competition car with exposed details and a focused mechanical layout. The subject itself is rich in engineering detail. The original car used an 8-cylinder 2,263 cc engine, a 4-speed manual gearbox and a supercharger, and that technical identity shapes the model's appeal beyond its bodywork alone. New parts expand the build, while the opening cowling creates direct access to the engine area once assembled. Artificial leather, chromed parts, photoetched parts, screws, tubes and a die-cut masking sheet support a finish with varied textures and sharper detailing across key sections. The large 1:12 scale also gives the spoked wheel design, cockpit area and external race-car proportions more room to stand out. On the bench, the build suits careful painting, masking and detail work across the body, engine bay and cockpit. Once completed, the model carries the visual drama of a pre-war Grand Prix car, whether placed in a collection, photographed close up or displayed to highlight its racing silhouette and exposed mechanical character. Warning! Not suitable for children under 14 years.
Model motorcycles
Cagiva Elephant 850 Winner 1987 Model Kit 1:9
510104643€64.99
The Italeri Cagiva Elephant 850 Winner 1987 model kit brings a landmark Paris-Dakar rally motorcycle into a large 1:9 scale format, with a finished length of 23.8 cm that gives the fairing, seat profile and off-road layout clear visual impact on display. Based on the 1987 race machine, the build captures the distinctive desert configuration that set the original bike apart in endurance competition. The full-size motorcycle combined a steel tube and light alloy trellis frame with an air-cooled twin-cylinder engine rated at 80 HP at 8500 rpm, and the bodywork was shaped around a large protective fairing. Italeri supports that character with a detailed plastic kit that also includes rubber parts, screws, springs and rubber tubes, adding extra texture and mechanical definition during the build. The decal sheet carries race numbers, sponsor markings, instrument details and body striping used to recreate the period rally livery with precision. With an assembly time of about 600 minutes, this kit suits builders who enjoy a longer bench session centered on painting, fitting and finishing. The completed motorcycle stands out in a display case, on a workshop shelf or as part of a motorsport collection, where the Dakar-inspired silhouette, tall front section and competition graphics remain easy to read from across the room.
Model aircraft
CANT Z.1007 Alcione model kit 1:72 aircraft
510001479€33.49
The CANT Z.1007 Alcione model kit in 1:72 scale recreates an Italian medium bomber that entered service in the late 1930s and saw extensive use with the Regia Aeronautica during the Second World War. Its defining 3-engine configuration gives the aircraft a distinctive silhouette on the workbench and in a finished display, while the historical subject adds clear context for builders drawn to military aviation. Designed by Filippo Zappata, the original CANT Z.1007 Alcione combined a wooden structure with 3 Piaggio P.XI radial engines, each rated at 1,000 hp. That power allowed the bomber to reach a maximum speed of 450 km/h. The aircraft also carried up to 1,200 kg of offensive payload in an internal bomb bay, a detail that underlines its role as a medium bomber rather than a transport or patrol aircraft alone. Crew capacity was typically 5 men, rising to 6 when a photographic operator joined reconnaissance and maritime patrol missions. The subject connects this 1:72 build to the Mediterranean, Balkan and North African theatres where the aircraft was mainly deployed. With an age marking of 14 years and up, the kit suits builders looking for a historically grounded aircraft project with a clearly documented wartime background and a recognisable tri-motor layout. Warning! Not suitable for children under 14 years.
Military aeroplane models
CANT Z.501 Gabbiano model kit 1:72 seaplane
510000112€30.99
The Italeri CANT Z.501 Gabbiano brings a distinctive Italian flying boat into 1:72 scale, capturing the long central hull, broad high wing and stabilising lateral floats that defined this maritime reconnaissance aircraft. As a detailed assembly kit, it turns the unusual seaplane layout into a focused build with a strong display presence once the airframe is complete. The original CANT Z.501 was developed in the 1930s by engineer Filippo Zappata for Cantieri Riuniti dell'Adriatico and served in patrol, search and rescue, and reconnaissance roles at sea. Its full-size configuration used a 900 HP Isotta Fraschini Asso XI engine and reached a maximum speed of 275 km/h, details that place the model within a clearly documented aviation context. The aircraft entered operational service during the Spanish Civil War and later saw extensive use by the Regia Aeronautica in the Mediterranean theatre during World War II. Defensive armament on the original aircraft consisted of three 7.7 mm Breda-SAFAT machine guns, and it could also carry a limited offensive payload. With about 600 minutes of assembly time, the build suits sessions that reward careful painting, decal placement and attention to the aircraft's float-equipped wing arrangement. The super decals sheet for 4 versions opens different finishing directions for a shelf display centred on interwar and World War II Italian naval aviation. Recommended from 14 years. Warning! Not suitable for children under 14 years.
Model tanks
Commando Car 1:35 Scale Model Kit with Figure
510000320€12.49
The Italeri Commando Car presents a compact 1:35 scale military vehicle kit with a finished length of 9.5 cm and the open layout of a modified airborne jeep. Its proportions, exposed cabin and field equipment create a focused display piece that brings reconnaissance and commando vehicle history onto the workbench in a manageable format. The build is shaped around distinct subassemblies, including the interior tub, radiator and grille section, ladder-style chassis, suspension parts, wheels and exterior fittings. Instruction stages show steering and control details, seat assemblies, stowage pieces, a spare wheel and multiple weapon mounts, giving the model a layered mechanical look rather than a simplified silhouette. The subject is based on a wartime vehicle adapted for infantry support and rapid raids, with 5 machine guns and additional fuel capacity of 135 l in the original configuration. A crew figure is included to add scale contrast and strengthen diorama placement. On a shelf, in a military vehicle lineup or as part of a terrain scene, the Commando Car reads clearly through its low body, exposed seating and heavily equipped profile. Assembly is required, with a stated build time of 600 minutes. Paints, tools and cement are required separately.
Model figures
Confederate Cavalry Model Kit 1:72 Civil War
510006011€10.99
Italeri Confederate Cavalry brings American Civil War mounted troops into 1:72 scale with an assembly kit built for historical displays, painted collections and battlefield dioramas. The set centres on cavalry figures and horses with varied poses, giving the finished scene the movement of a charge, a patrol or a formed mounted unit across terrain, roads or camp edges. The source material for the set points to Confederate cavalry regiments and their distinctive uniform details, including yellow trim, while also noting varied personal weapons and customised dress. That mix gives the finished group a less uniform field appearance than parade troops and suits scenes that aim to show the irregular character of wartime cavalry service. The sprues show riders with sabers and firearms, horse poses in motion, and a fallen horse part that can change the tone of a diorama from formal display to active combat. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a cabinet or across a wargaming table, the 1:72 scale makes the set easy to combine with other American Civil War miniatures, terrain pieces and period artillery. Careful painting can bring out saddle gear, hats, jackets and horse tack, while grouped placement can suggest a fast-moving attack line or a command element within a broader historical scene.
Model tanks
Crusader Mk.III Tank Kit with British Crew 1:35
510006592€36.99
The Italeri Crusader Mk.III with British Crew brings a key British cruiser tank of the Second World War into 1:35 scale, pairing the later Mk.III configuration with a full crew scene for a display that goes beyond the vehicle alone. The build centers on the Crusader's desert-war profile, with its 6 pdr cannon and the distinctive running gear layout that made the type notable in rough terrain operations. This plastic kit is designed as a detailed assembly project and lists an assembly time of 600 minutes, giving the tank and figures room for a more involved finish. The Christie suspension with large diameter rolling wheels is part of the Crusader's defining engineering, and that layout gives the completed model a recognisable stance. Gluable rubber tracks shape the lower hull with flexible track runs, while the marking sheet supplies decals for 3 versions with serial numbers and tactical signs. The set also contains 9 figures, opening up options for command, maintenance and rest-scene arrangements around the tank. On a shelf, in a desert diorama or as part of a wider WWII armour collection, the combination of vehicle and crew creates a fuller historical scene than a tank alone. Paints and tools are required separately.
RC servos
CS-10 Digital Servo, RC servo, waterproof
500502051€31.99
Compact RC control systems rely on a servo that turns radio signals into exact movement, and the CS-10 Digital Servo is built for that task with digital regulation, waterproof construction and a JR plug layout. The black housing with metallic centre section and splined output shaft is shaped for installation in common model applications where steering, throttle or other linkages need controlled travel. Its 0.17-second response supports quick actuation, while the 10 kg torque rating provides the force needed for demanding control duties. Ball bearings support the output shaft for smooth running, and the metal gear train is designed for direct transfer of servo movement to the connected horn and linkage. Included mounting hardware expands setup options with a single-arm horn, an X-shaped horn with multiple linkage holes, rubber grommets and a fastening screw. The 3-wire lead uses the familiar red, black and white layout seen across many RC installations. In an RC car, the servo can manage steering inputs through the splined shaft and horn geometry; in a boat or other hobby mechanism, it can drive throttle or moving control parts with the same compact format. The waterproof design also suits outdoor running where spray and damp conditions are part of the session. Warning! Not suitable for children under 14 years.
RC servos
CS-17 Digital Servo, RC servo, waterproof
500502052€34.99
The CS-17 brings digital servo control, waterproof construction and 17 kg actuating force into a compact RC component built for precise movement in demanding model setups. With a stated speed of 0.19 sec and a JR connector on the 3-wire lead, it suits steering, throttle and brake functions where clean signal response and dependable installation matter. The housing combines black end caps with a silver centre section, and the top output shaft is metal with a splined interface for secure horn mounting. Side tabs with screw holes support fixed installation in model vehicles or boats, while the included single-arm horn and 4-arm horn offer different linkage layouts. Multiple adjustment holes on the horns make it possible to alter leverage and control travel to match the mechanism in use. Rubber grommets are included for vibration-damped mounting, and the central fixing screw secures the horn to the output shaft. In an on-road chassis, off-road build or boat hull, the servo can be assigned to the moving function that needs measured, repeatable input. The combination of digital operation, waterproof design and included mounting hardware makes the CS-17 a focused choice for hobby workbenches, replacement jobs and fresh RC builds. Warning! Not suitable for children under 14 years.
RC servos
CS-7 Digital Servo, RC servo, waterproof
500502050€29.99
The CS-7 Digital Servo brings fast digital control to RC installations that need crisp, repeatable movement. With a stated transit time of 0.17 s, this regular-size servo suits steering, throttle or other control functions where quick response and accurate linkage travel matter. The black and silver housing carries a waterproof design, adding flexibility for models that run in wet grass, on damp ground or around spray. Inside the compact case, the servo combines a 7 kg force rating with ball bearing support at the output shaft. That layout helps the spline run smoothly when the horn changes direction under load. The top output shaft accepts the supplied servo horns, including a single-arm horn and a 4-arm horn with multiple linkage holes for different geometry choices. Mounting tabs on the case and the included rubber grommets support secure installation in a chassis, frame or other model structure. The attached 3-wire lead uses a JR plug for connection to compatible radio systems. In cars, boats, aircraft or other hobby mechanisms, the CS-7 Digital Servo fits wherever controlled rotary movement needs to be translated into precise mechanical action. Age marking: 14 years Warning! Not suitable for children under 14 years.
RC helicopters
Cyber Copter IR 2Ch RTF, helicopter, blue
500507193€21.99
The Cyber Copter IR 2Ch RTF blue brings a futuristic helicopter shape together with ready-to-fly handling for fast access to indoor model flying. Its slim fuselage width of 38 mm, blue finish and switchable LED position lights create a crisp look in the air, especially when flights continue into lower evening light. Infrared control keeps the handling focused on the core 2-channel functions, while the integrated gyroscope supports stable flight behaviour during turns and hovering corrections. Left and right trim adjustment allows the flight path to be tuned more precisely to the room and control input. The helicopter reaches speeds of up to 10 km/h, giving short indoor runs enough pace to feel lively without overwhelming the compact format. At 230 mm long and 95 mm high, with a rotor diameter of 190 mm, the model stays manageable in smaller spaces. The low takeoff weight of 35 g adds to that controlled character during living room or hobby room sessions. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime, and charging runs through USB for straightforward turnaround between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 x LR03 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8+
RC helicopters
Cyber Copter Rescue, RC helicopter, 2.4GHz
500507195€25.99
The Cyber Copter Rescue brings compact rotor flight into a ready-to-fly format with a futuristic body, a 190 mm rotor diameter and a 2-channel 2.4 GHz radio system. At 230 mm long, 95 mm high and only 35 g in takeoff weight, the model is sized for controlled indoor flying, where short lift-offs, hovering practice and gentle turns can happen in a smaller space. Its 3.7 V 150 mAh LiPo flight battery delivers up to 8 minutes of runtime and supports speeds of up to 10 km/h. Charging runs via USB, making the battery easy to top up from common USB power sources between sessions. The transmitter operates the flight direction and the LED position lights, while the trim function allows left and right correction to match the room and handling input. The integrated gyroscope works continuously in the background to steady the helicopter during flight. Included in the set are the ready-to-fly model, the 2.4 GHz remote control, a USB charger, 3 LR03 AAA transmitter batteries and a manual. The age marking is 8 years. Short practice flights in a living room, hobby room or other indoor area suit the compact dimensions well, especially when learning how throttle and steering interact in the air.
RC quadcopters
Cyber Drone IR RTF, quadcopter, 360° flip
500507190€25.99
Compact dimensions and quick-response controls give the Cyber Drone IR RTF a lively indoor flight character, with a 125 mm length, 135 mm width and 150 mm diameter that keep the quadcopter agile in smaller spaces. The 45 mm rotor diameter and 50 g ascent weight support a light, nimble feel in the air, while the red finish and blue LED lighting make the flight path easy to follow during turns and short hovering runs. The control setup focuses on clear handling rather than complexity. Individually adjustable trim allows left and right correction when the quadcopter drifts, and the gyro helps keep movements more settled during take-off, hovering and directional changes. A button-triggered Coming Home function returns the quadcopter to its home point, adding a direct control shortcut during indoor sessions. The 360° flip function brings a distinct stunt element, and the 3 speed settings make it easy to switch between measured practice laps and faster reactions. 8Y+. With an 8 minute flight time, the model suits short flying sessions in living rooms, hobby spaces or other open indoor areas where compact manoeuvres and quick turns come into play. A replacement battery with 3.7 V, 600 mAh and Molex connector is available separately for extended session planning
RC quadcopters
Cyber Drone IR RTF, quadcopter, 360° flips
500507189€25.99
The Cyber Drone IR RTF brings compact quadcopter flying into a format built for quick lift-off and controlled indoor sessions. Its 125 mm length, 135 mm width and 150 mm diameter keep the frame small and nimble, while the 45 mm rotor diameter and 50 g ascent weight support a light, responsive feel as the orange drone moves through turns, short climbs and hovering passes. The Coming Home function returns the quadcopter to its home point at the touch of a button, adding a clear control step during flight. Flight time reaches 8 minutes per charge, powered by the included 3.7 V 600 mAh LiPo flight battery. The ready-to-fly package also includes the IR remote control and a USB charger, so the core flying equipment is already part of the set. EN 71, EN 62115 and EN 4709-001 compliance is stated in the product data, and the age marking is 8 years. Short practice flights, button-triggered flips and pace changes across the 3 speed levels give each session a distinct rhythm. Blue flashing LEDs stay visible as the drone circles through a room, rises for a quick stunt, then settles back into controlled directional inputs.
RC quadcopters
Cyber Drone Space Taxi, quadcopter, 2.4 GHz RTF
500507187€34.99
The Cyber Drone Space Taxi 2.4G 100% RTF brings compact quadcopter flying into a 125 mm long and 135 mm wide format with a 150 mm diameter and 45 mm rotor diameter. Its ready-to-fly setup, 2.4 GHz remote control system and 3.7 V 600 mAh LiPo flight battery put the focus on lift-off, hovering and short directional inputs with minimal preparation. With a flight time of 8 min and an ascent weight of 50 g, the model stays light in the air and easy to handle in compact spaces. A one-button Coming Home function sends the quadcopter back toward its home point, adding a clear control aid during short flight sessions. The included flight battery matches the stated 3.7 V and 600 mAh specification, and the data also names a replacement battery with a Molex connector for continued use across multiple sessions. The 2.4 GHz control system supports responsive command input without cable connections, fitting the quick, agile character of a small rotorcraft. Short indoor flights, first hovering practice and simple stunt runs all suit this format well. With an age marking of 8 years, the Cyber Drone Space Taxi fits entry-level remote-control flying where compact dimensions, visible lighting and button-based functions keep each session active and easy to follow.
Model trucks
DAF 95 Master Truck 1:24 scale model kit
510000788€59.99
The Italeri 1:24 DAF 95 Master Truck ZgM captures the flagship character of the Concept 95/380 in a scale model kit shaped around the high-roof Space Cab tractor unit. The cab-over layout, tall roofline and three-axle rear arrangement give the finished truck the distinctive long-haul stance that made the original DAF 95 stand out on European roads. The full-size vehicle was developed as a further step in the Space Cab series, and this kit reflects that more advanced design through its body lines, grille treatment and marked 95 380 ATI identity. The original truck paired a 6-cylinder ATI Advanced Turbo Intercooling engine with a soundproof cabin and advanced shock absorbers, details that define the character of the subject being built here. Visible truck elements such as the side mirrors, steps, tank sections, rear mudguards and under-run protection help create a more complete tractor-unit silhouette once assembled. The included decal sheet extends that realism with cab stripes, instrument panel details, country plates and small service markings. With a stated assembly time of 600 minutes, the build lends itself to a steady bench session where painting, decal placement and final detailing shape the result. Paints are required separately. Once completed, the model fits naturally into truck collections, workshop shelves or transport dioramas, where the Space Cab profile and fifth-wheel layout give it a clear heavy-haul identity. Warning! Not suitable for children under 14 years.
Model aircraft
Dornier Do 217 K-1/K-2 Aircraft Kit 1:72
510001488€36.99
The Italeri Dornier Do 217 K-1/K-2 with Fritz-X guided bombs captures a distinctive World War II aircraft in 1:72 scale, combining the broad wing layout, twin-engine configuration and glazed nose of the Luftwaffe bomber in a detailed plastic kit. The subject represents the Do 217K variant, developed with a reinforced fuselage, redesigned wing surfaces and upgraded engines, and adapted to carry the Ruhrstahl SD 1400 Fritz X on an underwing pylon. The build is shaped around multiple injection-molded sprues with finely engraved surface detail, separate fuselage halves, wing sections, propellers, landing gear parts and transparent canopy elements. These clear parts help define the cockpit area and nose glazing, while the external stores and pylon components give the finished aircraft its characteristic guided-bomb configuration. The decal sheet, screen printed by Cartograf, is arranged for 6 versions and adds crosses, code letters, serial markings and maintenance stencils for a more complete historical finish. Figures are not included. On the workbench, the combination of structural airframe parts, clear glazing and detailed markings supports a focused aircraft build with plenty of painting and finishing work. Once assembled, the 1:72 scale format suits shelf display, diorama use or a line-up with other historic aircraft subjects from the same era. Warning! Not suitable for children under 14 years.
Basic accessories
Drive Shaft Set, RC accessory, 1:14 universal
500907004€33.99
A universal drive shaft is one of the key links in an RC drivetrain, and this 1:14 set is built to adapt that link to the chassis at hand. The 112 mm shaft can be cut to length, making it suitable for model-building projects where the driveline needs a more exact fit than a fixed-length part can offer. The set uses aluminium and steel, combining a lightweight shaft material with metal connection parts for the rotating assembly. Alongside the main shaft, the contents include 2 dog bones and 2 adapters, so the core coupling parts are already part of the set. That makes this accessory useful for replacement work on an existing model as well as for custom builds that need a universal driveline connection. The 1:14 scale note keeps the application focused on compatible model sizes rather than full-size hardware. On the workbench, the cut-to-length format supports cleaner adaptation to different chassis layouts and wheelbase requirements. In running models, the assembled shaft serves the practical task it is built for: transferring rotation through the driveline between connected components in a compact metal setup.
Model tanks
DUKW Amphibious Truck Model Kit 1:72 Scale
510007022€15.99
The Italeri 1:72 DUKW Amphibious truck model kit brings a historic military transport into a compact build with the unmistakable shape of its amphibious hull and 6x6 layout. At about 117 mm in length, the finished model fits neatly into display cabinets, convoy scenes or beach landing dioramas while still leaving room for painted detail across the cab, cargo area and hull sides. The full-size DUKW was developed from the General Motor CCKW-353 2 1/2 t tactical transport truck to move loads quickly from ships to beaches during landing operations. Its 4,400 cm3 6-cylinder engine, three differentials and six driving wheels formed the mechanical basis, while the welded hull with horizontal rib reinforcement gave the vehicle its amphibious role. This kit translates that distinctive combination into a detailed plastic build that invites careful assembly, painting and finishing. Decals for 1 version are included to add markings once construction is complete. The subject suits historically focused model collections and WWII scene building, especially where transport vehicles add context beyond tanks and artillery. Assembly is required and the stated assembly time is 600 minutes. Paints, cement and tools are required separately. Warning! Not suitable for children under 14 years.
Model tanks
DUKW Amphibious Vehicle Model Kit 1:35 Scale
510006392€32.99
The Italeri 1:35 DUKW Amphibious Vehicle model kit brings a landmark military transport into a detailed scale build, combining the long 6x6 layout of the General Motor CCKW-353 with the welded hull that allowed the full-size vehicle to move between ship, surf and shore. In model form, that unusual combination gives the finished subject a striking silhouette, with truck running gear set into a boat-shaped body built for amphibious operations. The original vehicle used a 4,400 cm3 6-cylinder engine, three differentials and 6 driving wheels, and those engineering roots shape the character of this kit. Horizontal rib reinforcement on the hull adds another defining visual feature, setting the DUKW apart from standard transport trucks of the period. The full-size vehicle could carry a 2,400 kg payload or 25 fully equipped troops, which explains its broad use by the U.S. Army, U.S. Marines and Allied forces across multiple theatres of war. This edition also includes a new decal sheet for 4 versions, opening several historically grounded finishing directions for the completed model. The subject suits builders drawn to WWII logistics vehicles, beach landing scenes and transport-focused dioramas. Markings linked to operations such as Normandy, Salerno, Anzio and Pacific landings give the completed build a strong historical setting, whether placed on a display shelf or worked into a larger coastal scene.
Military aeroplane models
EA-18G Growler Aircraft Model Kit 1:48 Scale
510002824€43.99
The Italeri 1:48 EA-18G Growler brings a modern carrier-based electronic warfare aircraft into scale form with the long, twin-seat fuselage and naval jet profile derived from the F/A-18F Super Hornet. As a detailed plastic kit, it focuses on the specific configuration that sets the Growler apart, including the dedicated electronic warfare installation in place of the standard 20 mm cannon and the external stores associated with its mission. The full-size aircraft uses General Electric engines and reaches a maximum speed of Mach 1.8, with flight performance described as similar to the main carrier-based aircraft in U.S. Navy service. The real aircraft operates with a 2-man crew made up of a pilot and a WSO, and that tandem arrangement shapes the cockpit and canopy layout of the model. Marking options shown for the kit cover 3 aircraft versions, including U.S. Navy VAQ-134, U.S. Navy VAQ-137 and Australian 6 Squadron subjects. The decal sheet also extends to instrument panels, external fuel tank markings, AIM-120 details and AN/ALQ99 pod markings, supporting a more complete finishing stage. With a stated assembly time of 600 minutes, this kit suits a slower, detail-led build on the workbench and a display finish once complete. Paints, tools and cement are required separately. Warning! Not suitable for children under 14 years.
RC helicopters
Easy Tyrann 280, RC helicopter, 2.4 GHz RTF
500507173€39.99
The Easy Tyrann 280 brings coaxial helicopter flying into a compact 280 x 200 x 125 mm format with a ready-to-fly setup, a 2.4 GHz control system and a top speed of 25 km/h. Its blue and black body, landing skids and illuminated nose give the model a clear presence as it lifts off for first hovering attempts in the living room or on a calm patio. Integrated gyro electronics support steadier flight characteristics, while the aluminium tail boom adds structure to the rear section during directional control. Left and right trim can be adjusted from the transmitter to correct the flight path in the air rather than interrupting a session. The switchable LED position indicators help keep orientation visible when the helicopter turns or moves further from the starting point. A 3.7 V 250 mAh LiPo flight battery powers runs of up to 8 minutes, and the included USB charger handles recharging between flights. The set also includes 3 x AAA transmitter batteries, so the model arrives with the key operating components in the box. This RC helicopter fits short practice sessions, from learning stable hovering indoors to controlled passes in light outdoor conditions. With 12 Years as the stated age marking and 1-player operation, the Easy Tyrann 280 suits focused solo flying where control inputs, trim changes and throttle feel can be learned step by step.
Model tools
EdgeArt Brush Modeling Brush with PTFE Tip
500908252€8.69
EdgeArt Brush brings 2 functions together in one modeling tool: a brush for paint work and a PTFE tip for decal handling. That combination supports controlled finishing on scale models, where small surfaces, narrow edges and clean placement call for more than a standard brush alone. The PTFE tip adds a dedicated contact point for moving, aligning or smoothing decals during application, while the brush side remains ready for detail painting and touch-ups. This makes the tool useful across separate finishing steps without changing between unrelated bench tools. The compact format suits careful work on markings, trim lines and other small visual details that shape the final look of a build. With batteries not included and no power requirement stated, the focus stays entirely on manual control and precise handling at the workbench. In a model-building session, the EdgeArt Brush can move from painted details to decal placement as the finish develops across the body or surface. For hobby benches where fine corrections, small graphics and neat edges matter, the combined brush and PTFE tip keep the process direct and exact.
Trailers & accessories
European Tractors TYRES and RIMS 1:24 kit
510003909€26.49
European Tractors TYRES and RIMS brings 1:24 scale wheel detail to truck model projects with a dedicated accessory kit built for European tractor units. The box contains 7 tyres and 7 rims, giving the build the specific wheel equipment needed to refine a tractor layout with front, rear, and spare wheel positions. The tyre and rim combination is designed as a detailed plastic kit, while the tyres themselves are shown as soft rubber parts for a more realistic finished appearance. The set uses 100% new moulds, supporting crisp rim structure and clearly defined wheel components during assembly. Front wheel equipment is supplied in size 385/65 R22.5, while the rear wheel equipment is supplied in size 315/80 R22.5, matching the different axle roles found on European tractor units. A decals sheet is included to apply sidewall markings and size graphics, adding another layer of scale-specific finish to the completed wheels. With an assembly time of 600 minutes, the kit suits builders who want to spend time on wheel detail rather than treating it as a background part of the model. It can be used to upgrade a tractor unit build, replace kit wheels, or add a more specific tyre setup to a 1:24 display project. Age marking: 14 Years.
RC remote controls
EX-NEXT BASIC LDT, transmitter, 2.4 GHz
505010784€399.99
The EX-NEXT BASIC LDT brings KO Propo's current XT radio system into a 4-channel transmitter built for fast, exact control on the track. High resolution signal processing and a redesigned electronic layout work together for a notably direct steering response, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. The set includes the KR-242XT receiver with long antenna for telemetry use. Its menu structure goes far beyond basic trim changes. Steering functions cover servo travel limit, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, auto-start, idle-up, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. A display, conversion calculator, VR information, sound settings and adjustable menu speed keep setup work clear at the bench between runs. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V, or a LiPo rechargeable battery 2S 7.4 V are required separately. Warning! Not suitable for children under 14 years.
RC remote controls
EX-NEXT BASIC LDT, transmitter, 2.4 GHz
505010786€399.99
The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 2.4 GHz transmitter built for fast, exact control. Its redesigned electronics deliver a highly direct steering feel and, in XT Advanced Mode, transmission speed up to 3 times faster than the EX RR. The included KR-242XT receiver with short antenna completes the core setup for telemetry use. A 4-channel PWM or serial layout gives the system a broad technical base for competition-focused RC driving. Steering functions include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim or balance and servo reverse. Throttle and brake adjustment extends further with 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way switching, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The transmitter measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving a substantial handheld format for longer sessions at the track. Timer functions include lap history, trigger start, lap navigation and alarm mode for structured race practice. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately. Age 14+ Warning! Not suitable for children under 14 years.
RC remote controls
EX-NEXT BASIC LDT, transmitter, 4-channel 2.4 GHz
505010787€439.99
The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 4-channel transmitter built for fast, exact control. High resolution signal processing and the redesigned electronics work together for a notably direct steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. In the hand, the 240.5 x 163.0 x 107.2 mm format and 551 g weight create a substantial control unit for focused driving sessions. Its menu depth goes well beyond basic steering and throttle adjustment. Steering settings include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake functions add 3-stage forward and reverse speed, acceleration, push control, auto-start, idle-up, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way functions, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. Telemetry features cover RF mode, pairing, Real-Time ICS and battery failsafe, while timer functions include lap history, trigger start, alarm mode and lap navigation for track-focused running. The set comes with 2 KR-242XT receivers with short antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V or a LiPo rechargeable battery 2S 7.4 V are required separately. Warning! Not suitable for children under 14 years.
RC remote controls
EX-NEXT BASIC RC transmitter, 4-channel 2.4 GHz
505010778€399.99
The EX-NEXT BASIC RC transmitter brings KO Propo control hardware into a focused 4-channel 2.4 GHz format built for fast, accurate driving. XT radio technology and newly developed electronics work together for highly precise response, with XT Advanced Mode reaching up to 3 times the transmission speed of the EX RR. The result is a notably smooth steering feel and direct control input that suits racing, competition and high-performance RC models. Its setup depth goes well beyond basic trim functions. Steering adjustment covers servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake tuning add 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, brake-in, hand brake and override. Timer functions include lap history, trigger start, lap navigation and alarm mode, while system tools add display settings, menu speed, battery information and a conversion calculator. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the unit a substantial hand-held format for track sessions and bench setup alike. The set includes 1 KR-242XT receiver with long antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery 6.6 V or a 2S LiPo rechargeable battery 7.4 V are required separately. Warning! Not suitable for children under 14 years.
RC remote controls
EX-NEXT Basic, transmitter set, 4-channel 2.4 GHz
505010781€439.99
Fast response and fine control define the EX-NEXT Basic transmitter set for ambitious RC driving. The 4-channel 2.4 GHz system uses the XT radio standard and combines the EX NEXT master unit with LCD, Xpansion Unit 2 EXP 201, Extension Unit 2.1 Basic and Grip Unit 2 Basic in one configured setup. The electronics platform supports XT Telemetry as the factory RF mode and reaches up to 3x the transmission speed of the EX RR in XT Advanced Mode. Real-Time ICS, pairing functions, battery failsafe and a wide system menu expand the setup range beyond basic driving adjustments. The transmitter measures 240.5 x 163.0 x 107.2 mm, weighs 551 g excluding batteries and has a power consumption of 200 mA. Timer functions include trigger start, lap history, lap navigation, alarm mode and start stop control, adding useful race-day data handling alongside the driving setup. Compatible receivers are listed as KR 420XT and KR 242XT, and this version comes with 2 KR-242XT short antenna receivers. Power is supplied separately via 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery at 6.6 V or a 2S LiPo rechargeable battery at 7.4 V. The broad menu structure suits competition sessions, multi-car pit setups and detailed tuning work on performance-focused RC models. Warning! Not suitable for children under 14 years.
RC remote controls
EX-NEXT BASIC, transmitter, 4-channel 2.4 GHz
505010783€419.99
The EX-NEXT BASIC transmitter brings KO Propo control technology into a focused 4-channel 2.4 GHz format built for precise RC driving. XT radio standard and high-resolution signal processing work together for very fast response and a notably smooth steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. On the bench or at the track, that combination supports direct inputs and clean corrections through technical sections. Its control architecture goes well beyond basic steering and throttle adjustment. Steering functions include servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, push control, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3-8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the transmitter a substantial hand feel for longer sessions. Model selection, model copy, model reset and 50 memory slots support fleets with different setups, while the timer menu adds start timer, trigger start, lap button and lap navigation for repeatable practice runs. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately. Warning! Not suitable for children under 14 years.
Military aeroplane models
F-14A Tomcat 1:72 Aircraft Model Kit with Decals
510001414€32.99
The Italeri F-14A Tomcat in 1:72 scale brings one of the defining U.S. Navy fighters of the 1970s through 1990s to the workbench as a detailed aircraft model kit. At 26.5 cm long, the finished jet has the long nose, twin-engine layout, twin-tail profile and tandem 2-seat cabin that made the Tomcat instantly recognizable in carrier operations and interceptor roles. This assembly kit is based on ESCI moulds and uses recessed line panels across the airframe, giving the surface a crisp engraved look that supports careful painting and weathering. The subject itself carries strong technical character: the full-size F-14A used variable-sweep wings and 2 afterburning turbofans, reached Mach 2.34 and served in air superiority duties after replacing the F-4 Phantom II. The included super decals sheet opens 4 finishing versions, with squadron markings, serials, national insignia and stencil data for different aircraft appearances. Assembly is required, with a stated build time of 600 minutes. On the bench, the 1:72 format suits focused cockpit painting, landing gear work and precise decal placement across wings, tails and fuselage panels. Once completed, the F-14A Tomcat fits naturally into naval aviation displays, Cold War aircraft collections or diorama scenes that call for a carrier-based fighter with a strong historical presence.
Military aeroplane models
F-15C Eagle Aircraft Model Kit 1:72 Scale
510001415€22.99
The Italeri F-15C Eagle brings a modern air-superiority aircraft into 1:72 scale with a finished model length of 27.0 cm and the sharp profile that made the Eagle one of the defining fighter designs of its era. As a detailed assembly kit, it focuses on the distinctive twin-engine layout, broad wing planform and single-seat configuration that give the aircraft its unmistakable silhouette in flight and on display. This version draws on the later F-15C standard, the variant used by the U.S. Air Force, U.S. National Guard and several international air arms. The subject itself adds strong historical context, from its 1970s development for air-superiority missions to its combat use during the Gulf War in 1991. The aircraft's real-world specification also shapes the character of the build, with reference points such as the 20 mm M61 gun, a wide range of air-to-air missile options and 2 Pratt & Whitney F-100 after-burning turbofan engines capable of pushing the Eagle to Mach 2.5. A color instruction sheet supports the painting and marking process. On the bench, the kit suits builders who enjoy military aviation subjects with recognizable operational history and multiple finishing paths. The 4-version decal selection opens different marking choices, while the completed aircraft sits naturally in a collection of modern combat jets, Cold War aviation subjects or U.S. fighter types. Minimum age: 14 years
Model car kit
Fiat 131 Abarth Rally OLIO FIAT Model Kit
510003667€39.99
The Fiat 131 Abarth Rally OLIO FIAT model kit brings a landmark competition car into 1:24 scale with the wide-arched body, bonnet and side air intakes, and the bold rally livery that made this version instantly recognisable on gravel stages. Based on the 2-door Fiat 131 sedan and reworked by Abarth, the full-size car is reflected here as a detailed assembly project with a strong motorsport character. The subject itself carries rich rally history, with the Fiat 131 Abarth competing from 1976 and earning 3 World Rally Championship constructors' titles, a FIA Drivers' Cup and a drivers' championship. That background gives the finished build a clear place in competition history rather than a generic road-car look. The kit features rubber tyres for a more convincing wheel finish, a new decals sheet for the OLIO FIAT markings and race graphics, and black acetate splash guards that match the period rally setup. The body livery is tied to one of the iconic sponsor schemes associated with international competition in that era. During the build, the cockpit, exterior trim and competition markings come together into a display piece with the visual tension of a car caught mid-stage, dust trailing behind on a narrow rally road. Assembly is required and takes 600 minutes. Recommended age: 14 years and over.
Model car kit
Fiat 500 F Upgraded Edition Model Kit 1:12
510004715€124.99
The Italeri 1:12 Fiat 500 F Upgraded Edition model kit recreates the most classic version of the Nuova 500, the compact Fiat that became a defining sight on Italian streets. Its rounded bodywork, compact proportions and folded-roof silhouette give the finished car a strong period look, while the 1:12 scale leaves room for visible trim, interior surfaces and body contours to read clearly once assembled. This assembly kit centres on the 500 F introduced in 1965, the version noted for front-hinged doors, a new frame and a wider windscreen. The upgraded moulds support cleaner shaping across the body shell and help bring out the small car's distinctive lines. Build options for the top allow an open or closed roof appearance, so the finished car can be set to match different display preferences. Screenprinted markings add model-specific finishing detail, and the classic Fiat 500 F layout gives the build a recognisable reference point for historic car collections. On a shelf, desk or in a display cabinet, the finished model carries the character of a compact city car that shaped post-war motoring culture. The opening panels invite a closer look at the build, while the steerable wheels and suspension add extra mechanical detail during handling and presentation. Assembly time is 600 minutes. Warning! Not suitable for children under 14 years.
Model car kit
Fiat 500F 1968 Model Kit 1:12 with Opening Parts
510004703€129.99
The Fiat 500F 1968 model kit captures one of the most recognizable compact car shapes in 1:12 scale, building to a finished length of 25 cm. Its 100% new moulds support a sharply defined body shell, interior and exterior details, giving the classic Nuova 500 silhouette clear proportions on the bench and in a display cabinet. This assembly kit focuses on visible structure as much as outer shape. The build includes opening doors, a front bonnet and a rear bonnet, so the finished car can be shown with key panels raised rather than sealed shut. The roof can be completed in an opened or closed configuration, which changes the character of the model from a neat city-car profile to a folded-top version with more of the cabin on show. The kit also allows an Anglo-Saxon version with right-hand drive, adding a distinct interior layout option. Photoetched parts, chromed parts and rubber tires bring extra material contrast to trim, brightwork and running gear. Working suspension and steering wheels give the chassis a more technical finish, making the underbody and wheel areas as engaging as the exterior lines. During display, the model suits both closed-body presentation and open-panel setups that highlight the cabin, trim and mechanical detailing. Assembly is required, with an assembly time of 600 minutes.
Model car kit
FIAT 806 Grand Prix Model Kit 1:12 Scale
510004702€169.99
The FIAT 806 Grand Prix model kit in 1:12 scale brings a landmark 1927 racing car into a large 30 cm format with the long proportions, exposed suspension layout and open cockpit that define early Grand Prix design. Built from upgraded Protar moulds, this assembly kit focuses on the engineering character that made the original FIAT 806 such a notable machine in motorsport history. The full-size car used a 180 HP 12-cylinder engine and was developed with major innovations in chassis, mechanics and bodywork. On the original vehicle, the engine and gearbox unit sat between the two chassis bars to optimize performance and drivability, and that unusual layout gives the model much of its technical interest during the build. More than 400 parts create a dense construction project with room for careful finishing across the body panels, cockpit and running gear. The bonnet opens on the completed model to expose the engine bay, while photo-etched parts and metallic accessories such as screws, nuts and springs bring extra definition to smaller areas. With 600 minutes assembly time, the kit suits a slower, workshop-style build where each stage can be handled with attention to fit and finish. Paints, tools and cement are required separately. Once completed, the working steering and soft rubber tires give the FIAT 806 Grand Prix a convincing period stance for shelf display, cabinet presentation or a motorsport-focused collection.
Military aeroplane models
Fiat CR 32 Freccia 1:72 Aircraft Model Kit
510001438€17.49
The Italeri Fiat CR 32 Freccia in 1:72 scale turns one of the best-known interwar biplanes into a focused aircraft build with a strong historical profile. The assembly kit captures the compact fighter layout with stacked wings, fixed landing gear, an open cockpit and the distinctive proportions that made the CR 32 such a recognizable shape in aviation history. Designed in the early 1930s, the original aircraft used a 600 hp V-12 engine and reached 375 km/h, while its maneuverability made it a notable presence in air combat of the period. This kit draws on that background with markings for 5 versions, including aircraft from Regia Aeronautica, Aviazione Legionaria and the Hungarian Air Force. The decal sheet adds serials, insignia, crosses, tricolor panels and unit markings that support historically specific finishing rather than a single generic scheme. A display stand is also included, so the completed model can be presented in an in-flight angle once assembly and painting are complete. With assembly required and an indicated build time of 600 minutes, the model suits a slower bench session centered on fitting, painting and decal placement. The 14 Years+ marking matches the detailed format, making this a strong choice for builders drawn to classic military aviation, camouflage work and period squadron markings.
Electronics
Flashing Light Set, RC accessory, 2 orange beacons
500907010€82.99
Orange warning beacons are a familiar sight on construction machines, heavy-duty transporters and service vehicles, and this RC lighting set brings that visual cue into scale form with 2 compact flashing lights. Each beacon measures 14.5 mm in diameter and 25 mm in height with support, giving cabs, trailers and work-focused builds a clearly defined roof-mounted signal detail. The lighting effect comes from SMD flashing electronics that control 4 bulbs in sequence for a rotating beacon look rather than a static glow. The movable light can be mounted on a support with up to 5° slope, which helps when a cab roof or body panel is not completely level. The set is designed for broad use across construction site vehicles, heavy-duty vehicles, mockups and trailers. Connection-ready circuitry with shrinking tube is included, and the electronics module measures 37 x 30 x 5 mm for compact installation inside the model. Activation runs through a free switch cable on the receiver, so the beacons can be switched as part of the RC setup instead of being wired as a constant light. A Graupner-J/R connection cable is fitted for direct integration into compatible systems. The set suits scale builds that rely on functional lighting details to complete the look of working vehicles on the move or at a standstill.
Model car kit
Ford Escort Zakspeed Gr.2 D&W 1:24 Model Kit
510003664€37.99
The Italeri Ford Escort Zakspeed Gr.2 D&W brings a late-1970s touring car icon into 1:24 scale with a build centered on the Escort Mk 2 shape, flared arches and race-prepared bodywork. The model kit draws on the dedicated Zakspeed version used between 1977 and 1978, giving the finished car the compact proportions and aggressive circuit look associated with that period. The assembly kit uses detailed moulded parts to form the body shell, interior, chassis area and exterior details. Visible components in the kit include cockpit parts such as seats, dashboard and steering wheel, along with front grille elements, structural bars and separate tyres for front and rear fitment. The decal sheet adds a strong period finish with D&W Zakspeed graphics, sponsor markings and race numbers 20 and 21. This creates room for careful paintwork and precise decal placement across the body, windows and trim areas. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the 1:24 scale format gives enough surface area for painting details such as the light blue body, dark trim and racing markings while keeping the model manageable in size. Once completed, the Ford Escort Zakspeed Gr.2 D&W sits naturally in a collection of classic motorsport subjects, and it also offers a satisfying project for builders who enjoy historic racing cars with distinctive team livery.
Model figures
French Warriors Model Kit 1:72 Hundred Years War
510006026€10.99
Italeri French Warriors brings the Hundred Years War into 1:72 scale with a historical figure assembly kit built around cavalry and infantry. The set contains 28 unpainted figures in total, made up of 20 soldiers, 8 knights and 8 horses, creating a strong base for medieval battle lines, mounted charges or courtly escort scenes. The unpainted finish keeps every shield, surcoat and horse covering ready for individual colour work, whether the aim is a restrained campaign palette or bold heraldic contrast. Mounted and foot figures allow different scene structures within the same set, so a display can shift from a compact knight formation to a wider battlefield arrangement. The 600-minute assembly time points to a substantial modelling project with room for careful preparation, painting and placement. As an assembly kit, it suits builders who enjoy shaping a historical scene figure by figure rather than placing a finished cast straight onto a base. On a shelf, in a diorama or across tabletop terrain, the 1:72 scale makes the group easy to combine with other period miniatures and scenery. Cavalry can be positioned at the front of a charge while soldiers fill out the background, giving medieval layouts more depth and a clearer sense of movement.
Remote-controlled systems
FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz
500501022€119.99
The FS 14K Reflex Stick Pro 4 brings a 14-channel layout, 2.4GHz transmission and a modern ergonomic RC housing into one control system shaped for complex model functions. Its carbon-look surface and illuminated logo give the transmitter a technical, workshop-ready appearance when powered on. The channel structure is designed for detailed function control. Four channels work continuously and fully proportionally for direct response through the control sticks, while channels 7, 8, 9, 10, 13 and 14 are assigned to 3-position toggle switches. Channels 5, 6, 11 and 12 operate through 3-position push buttons with centre position, creating a clear split between proportional inputs and switched functions. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply allows up to 11 V without BEC. A 15-channel receiver is listed in the included contents. For setup work, channels 1 to 4 feature servo reverse and trim, and channels 1 and 4 add dual rate for servo travel adjustment. This makes the system suitable for models that need tailored steering, throttle or auxiliary function behaviour. 100% compatibility is stated for TAMIYA MFC 01, MFC 02, MFC 03 and DMD units, which suits truck and function-model layouts with multiple switching tasks. 14 Years is stated as the recommended age.
Remote-controlled systems
FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz
500501023€149.99
The FS 14K Reflex Stick Pro 4 LCD 2.4GHz brings broad channel control and fine setup options into one radio system built for demanding RC models. With 14 channels, an LCD layout and a 15-channel receiver in the set, it supports complex functions that go beyond basic steering and throttle, while the carbon-look finish and illuminated logo give the transmitter a distinctive technical appearance. Channels 7, 8, 9, 10, 13 and 14 use 3-position toggle switches, while channels 5, 6, 11 and 12 use 3-position push buttons with centre position. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply can reach up to 11 V without BEC. A Graupner J/R connector system is used for integration, and the radio is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as DMD units. The set includes the 14-channel LCD remote control, a 15-channel receiver and a manual. For truck, construction and function models with multiple switching tasks, the channel layout supports lighting, sound and auxiliary functions from one handset. The 14 Years marking fits advanced RC use, where stored model setups and detailed channel assignment matter during regular driving and system changes.
Remote-controlled systems
FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz
500501020€99.99
The FS 6K Reflex Stick Pro 4 2.4GHz brings 6-channel radio control into a layout built for detailed model setups and precise handling. Four continuously adjustable, fully proportional channels work alongside a 3-position push button on channel 5 and a 3-position toggle switch on channel 6, giving a clear control structure for driving functions and switched features. The integrated failsafe system adds an important control function for model operation. Trim for channels 1-4 supports exact correction directly at the transmitter, while dual rate for channels 1-2 adjusts servo travel for a more tailored response. The control sticks use precise, smooth mechanics, and the housing combines an ergonomic shape with a carbon-look surface and an illuminated logo when powered on. The transmitter operates at 4.8-6 V with 4 AA cells, the receiver power supply reaches up to 11 V without BEC, and the connector system uses Graupner J/R. Compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units expands the range of suitable model applications. On the bench, the channel layout supports careful setup of steering, throttle and auxiliary functions before a model heads out. During driving sessions, the separate switching options and proportional control help keep inputs clean and deliberate across different model configurations.
Remote-controlled systems
FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz
500501021€109.99
The FS 6K Reflex Stick Pro brings 2.4GHz radio control, a 6-channel layout and an LCD interface into one focused setup for model driving with a clear, technical feel in hand. Smooth control sticks, an ergonomic housing and a carbon-look surface shape a transmitter that suits longer sessions at the workbench and on the track alike. Channels 1 to 4 are continuously adjustable and fully proportional, while channel 6 is assigned to a 3-position toggle switch and channel 5 to a 3-position push button with centre position. The transmitter stores 15 model memories, making it easier to keep separate configurations ready for different vehicles. For channels 1 to 4, servo reverse changes direction of movement, trim corrects neutral position, dual rate adjusts servo travel, EPA limits servo travel and EXP changes response characteristics around centre input. The receiver power supply can reach up to 11 V without BEC, and the system is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as the DMD unit. A 6-channel receiver and manual are included. 4 AA cells are required separately for the 4.8 to 6 V transmitter operating voltage. With a minimum age marking of 14 years, this radio set fits hobby-focused RC setups where multiple channel functions, stored profiles and detailed response adjustment matter during driving and setup.
Tyres & rims
Fulda Variotonn Off-Road Tires, 1:14 accessory
500907612€26.99
The Fulda Variotonn off-road tires bring a scale-focused wheel upgrade to 1:14 model vehicles with a tread pattern shaped for rough ground and a look that suits truck and off-road builds. Supplied as a set of 2, they add a defined off-road profile with large outer tread blocks and a zigzag centre section that stands out clearly on the vehicle. Their flexible pneumatic construction is the key working feature here. As the tire deforms against the surface, it can maintain more usable contact on dirt tracks, gravel sections and uneven terrain, which supports traction during acceleration and directional changes. Compatibility with original Tamiya rims makes the set useful for replacing worn tires or adapting an existing wheel setup without changing the rim system. The 1:14 scale keeps the fit aligned with model layouts in this size class. On workshop benches, during maintenance sessions or as part of a fresh build, these tires add a functional off-road option where tread choice matters. The black finish and molded sidewall detailing also suit display models that benefit from a more rugged wheel appearance alongside practical running use.
Model figures
Gauls Warriors 1st Century Model Figures 1:72
510006022€10.99
Gauls Warriors 1st Century brings 1:72 scale historical modelling into a broad army set with 40 unpainted figures and 98 parts to assemble. The mix of warrior poses, separate shields and period equipment gives battle scenes a dense, active look, whether the figures stand in a charging line, guard a woodland pass or build out a larger ancient campaign display. The set draws on Gallic tribes from the areas of modern France, Switzerland, Belgium and Holland, placing the figures in the period of Caesar's campaigns and the leadership of Vercingetorix. Longswords and decorated shields define the visual identity of the warriors, while the varied stances help break up repetition across the group. The unpainted finish leaves room for custom colour work on clothing, shields and weapons, and the reference artwork shows patterned trousers, shield motifs and contrasting tones that can shape a more individual force. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a cabinet or across a terrain board, the figures can form a tribal war band, oppose Roman units or extend an existing ancient collection with more infantry depth. The 1:72 format also works well for builders who want to stage the Battle of Alesia or create original scenes with clustered shields, advancing spears and scattered command figures.
Electronics
Gearboxmotor Support Legs, trailer spare part
500907199€37.49
This geared motor is the dedicated drive component for Carson trailer support legs and is specified in the product data as the required accessory for 500907218 electrical support legs. Its compact format combines a cylindrical motor body, a gearbox section and an output shaft for installation in the matching trailer mechanism. The gearbox layout is designed to transmit the motor's rotation through the support leg drive, while the attached red and black wires provide the electrical connection points for integration into the intended setup. The product data identifies this version as 1 piece, making it suitable as a replacement part or as one unit toward a complete support leg drive arrangement. The same data also states that 2 pieces are required for the full electrical support leg configuration on compatible Carson trailers. Within a workshop, service bench or model trailer rebuild, this component fits the kind of task where a worn or missing drive unit needs to be exchanged with the correct matching motor. The stated age marking is 14 Years. As a model-building accessory, it focuses on the functional side of trailer equipment by supplying the motorised basis for the electrical support leg system.
Model tanks
German Guns Set Model Kit 1:72 with 8 Figures
510007026€12.99
The German Guns Set brings 3 artillery subjects together in 1:72 scale, combining PAK35, PAK40 and FLAK38 builds with 8 figures for a compact military scene that develops step by step on the workbench. Each gun adds a different silhouette to the finished layout, so the set can be arranged as a focused display with crews placed in firing, loading or support positions. As an assembly kit, this set suits builders who enjoy a longer project, with a stated assembly time of 600 minutes. The 1:72 format keeps the proportions tight and manageable while still leaving room for distinct gun shields, carriages, barrels and crew placement across the 3 models. The included figures help break up the composition around each emplacement and give the finished scene more depth than a guns-only build. Paints and cement are required separately. On a shelf, in a cabinet or as part of a wider World War II diorama, the completed set creates a layered arrangement with multiple focal points rather than a single vehicle or weapon. The shared 1:72 scale also makes it easier to combine the finished guns and figures with other military builds in the same collection.
Military figures & accessories
German Infantry Winter Uniform Figure Set 1:72
510006151€12.49
The Italeri German Infantry Winter Uniform Figure Set 1:72 brings World War II winter troops into compact scale with 36 unpainted figures shaped from 100% new moulds. Across a snowy diorama, trench section or battlefield display, the varied stances create the look of movement, cover and coordinated advance rather than a repeated row of matching soldiers. Each figure starts as an assembly kit, leaving room for careful preparation, painting and finishing work across helmets, coats, equipment and weapons. The 1:72 scale makes the set easy to combine with vehicles, artillery pieces and terrain built to the same proportion, so the figures can anchor a wider historical scene. Because the parts are unpainted, camouflage tones, shading and weathering can be matched to a chosen theatre or season. The new mould tooling also supports sharper separation between uniform layers and field gear, which helps brushwork stand out once painted. With a stated assembly time of 600 minutes, this set suits builders who want a longer project rather than a quick tabletop addition. The mix of standing, kneeling and prone positions gives flexibility when arranging snowbound defences, advancing infantry groups or support weapon placements, whether the figures are used as the centre of a display or to complete a larger World War II layout.
Model tools
GlueBrush 13 mm Tip Refill Pack, model accessory
500908256€4.89
Precise adhesive work often depends on the right contact width, and this GlueBrush refill pack adds 18 replacement tips in a 13 mm format for repeated use at the workbench. The wider tip size suits glue application across broader bonding areas, where an even spread helps keep joins neat during model-building and repair tasks. As a dedicated refill for the GlueBrush system, the pack supports ongoing workshop use without changing the established handling of the applicator itself. The 13 mm format gives a clear, practical option when adhesive needs to cover more surface than a narrow tip allows. That makes the set useful for assembly stages, material joins and touch-up work where consistent glue placement matters. With 18 replacement tips in one pack, fresh working heads are available for multiple sessions instead of relying on a worn applicator end. On a model-building bench, the refill pack fits naturally into regular adhesive routines, whether one stage calls for a clean new tip or separate materials are being handled in sequence. The format also works well as workshop stock for hobby projects that return to glue work again and again.
Model tools
GlueBrush 3 mm Tip, refill pack, model supply
500908255€4.89
GlueBrush 3 mm Tip (18) Refill Pack brings a straightforward supply of fresh applicator tips to the workbench for precise adhesive handling in model-building tasks. With 18 replacement tips in a 3 mm format, the set supports repeated glue application on smaller contact points, narrow edges and detail-led assembly steps. The 3 mm tip size helps keep the glue line defined when working on compact joins that need more control than a broader applicator can offer. As a refill pack, this set is built around maintaining the GlueBrush setup already in use, making it a practical addition for ongoing builds, touch-up work and repair jobs. The pack format suits hobby benches where consumables need to stay ready between projects, and the quantity of 18 tips provides a useful reserve for regular adhesive work. The age marking is 14 years and up. On a model-building table, these replacement tips fit naturally into assembly sessions that move between test fitting, bonding and detail placement. They also support careful adhesive application during maintenance work, when a fresh tip can help keep handling neat around smaller parts and tight spaces.
Model tools
GlueBrush-Set with 3mm Nano Tips, model tool
500908253€13.39
Precise adhesive placement can make the difference between a clean assembly and visible excess on a finished model. The GlueBrush-Set with 3 mm Nano Tips is built for controlled glue work on small contact areas, bringing a finer application point to detailed model-building tasks. The set format combines a GlueBrush applicator concept with 3 mm Nano Tips, giving model builders a concrete tool for directing adhesive onto narrow joins and small parts. That focused application helps when working around edges, seams and compact assemblies where broad glue spread can interfere with the finish. In repair work, touch-up steps or fresh builds, the smaller tip size supports a tidier workflow on parts that need accuracy rather than volume. The 3 mm tip dimension is the key working detail here, because it suits jobs where placement matters more than coverage. On the workbench, this set fits careful assembly sessions with scale models and hobby projects that call for neat glue control on fine components. The age marking 14 Years is stated in the product data.
Model tools
GlueBrush-Set, model supplies, 13 mm nano tips
500908254€13.39
The GlueBrush-Set with 13 mm nano tips is built for adhesive work that calls for a finer touch on model-building projects. Its compact tip format helps place glue on small contact areas, narrow seams and delicate parts where broad applicators can leave excess material behind. Within model supplies, this set supports controlled handling during assembly, touch-up and repair work on miniature components. The 13 mm tip length gives access to confined spots around edges and joins, making it easier to guide adhesive exactly where the bond is needed. That focused application can help keep surrounding detail cleaner on small-scale builds and reduce smearing across adjacent surfaces. Because the set is centred on precision rather than volume, it fits tasks that involve careful placement on trim, fittings and other fine sections. On the hobby bench, the GlueBrush-Set works well alongside regular building tools when a project reaches the stage for neat adhesive application. It also suits maintenance sessions where a small part, seam or detail piece needs accurate glue placement without flooding the area.
Model tanks
GMC 2 1/2Ton.Truck D-Day 80th Ann. 1:35 Kit
510006271€25.99
The Italeri GMC 2 1/2Ton.Truck D-Day 80th Ann. brings a key World War II transport vehicle into 1:35 scale, centering the build on the truck that formed a major part of U.S. Army logistics after the Normandy landings. The subject combines the familiar cargo configuration with the visual presence of a 6x6 military truck, giving the finished model a strong convoy and field-service character. This detailed assembly kit draws on a vehicle known for its robust structure, reliable service and effective suspension design. The six-wheel-drive layout is part of what made the original truck so useful on rough ground, and that mechanical identity carries through in the model's stance and proportions. The GMC 2 1/2 ton truck appeared in numerous variations, including cargo versions with open or closed cabins as well as long and short wheelbase forms, and this edition focuses on the wartime transport role tied to the D-Day 80th anniversary theme. Assembly is required. Paints, cement and tools are required separately. On the bench, the military markings and olive drab finish open up a classic WWII painting approach, while the completed truck fits naturally into Normandy-themed displays, supply column scenes or broader U.S. Army collections. The 1:35 scale also pairs well with other military vehicle builds from the same era, whether the model is placed as a standalone transport truck or as part of a larger historical diorama. Warning! Not suitable for children under 14 years.
Military figures & accessories
Hartenstein Hotel Battle Set Model Kit 1:72
510006107€79.99
Hartenstein Hotel is a 1:72 Battle Set from Italeri that recreates a September 1944 Operation Market Garden scene around one of the best-known Arnhem locations. The centrepiece is the Hartenstein Hotel, built from MDF laser-cut parts that form the multi-storey structure with window sections, facade details and architectural panels for a substantial battlefield backdrop. Around the hotel, the set combines 100 figures in total, with 50 British Paratroopers and 50 German Infantry for opposing forces across streets, entrances and defensive positions. A Willys Jeep and a Sturmgeschutz III are included as fast assembly models, adding 2 vehicle types that can anchor patrol, support or assault scenes. Extra battlefield buildings and accessories broaden the layout with a checkpoint, sandbag station, infirmary and watchtower, so the scene can be arranged with clear routes, cover points and elevated positions. Assembly is required, and the stated build time is 600 minutes. Once assembled, the set supports broad diorama layouts with the hotel as the focal structure and the smaller scenery elements spread around it to shape a perimeter or street approach. The 1:72 scale also makes the scene suitable for display shelves, historical tabletop setups or a dedicated WWII arrangement where figures, vehicles and buildings work together in one coherent setting. Warning! Not suitable for children under 14 years.
Military aeroplane models
Heinkel HE-111H-6 Aircraft Model Kit 1:72
510001436€34.99
The Italeri Heinkel HE-111H-6 brings a well-known twin-engine bomber into 1:72 scale with a detailed plastic kit that highlights the aircraft's fully glazed nose, broad wing planform and unmistakable tail profile. At 22.7 cm long, the finished model has a balanced display size that shows the shape clearly without demanding a large footprint. This assembly kit is built around a historical aircraft subject that formed a major part of Luftwaffe bomber operations in the early years of the Second World War. The original Heinkel He-111 used 2 Jumo 211 engines and reached a maximum speed of 440 km/h, while its internal loading bay could carry up to 2,000 kg of bombs. Those background details give the build context when working through the airframe, glazing, engines and external stores. Super decals for 5 versions expand the finishing possibilities, and the color instruction sheet supports accurate placement of markings and camouflage across different schemes. The 600-minute assembly time suits model builders who enjoy a more involved aircraft project with painting and decal work as part of the process. On the bench, the 1:72 format keeps handling practical during construction, and once completed the Heinkel HE-111H-6 sits naturally alongside other military aircraft in the same scale for display or collection. Age 14+
Model tanks
HEMTT Gun Truck Model Kit 1:35 with Decals
510106510€41.99
The Italeri 1:35 HEMTT Gun Truck model kit brings the heavy military transport platform into a build focused on armour, scale presence and field conversion detail. With a finished length of 28.0 cm, the truck's long 8-wheel layout gives the completed subject a commanding footprint that suits both shelf display and convoy diorama scenes. The HEMTT name stands for Heavy Expanded Mobility Tactical Truck, a vehicle range introduced for the United States Army from the mid-1980s. This version reflects the gun truck conversions developed for escort and convoy protection duties, with added defensive structures around the cab and rear section. The kit is described with fully upgraded moulds, supporting cleaner definition across the body panels and helping painted details stand out once the build is complete. Decals for 1 version add operational markings that reinforce the technical, service-used appearance of the truck. The assembly kit is recommended for ages 14+ and has a stated assembly time of 600 minutes. Figures are not included. On the workbench, the combination of large structural sections and smaller finishing details creates a measured, step-by-step build. Once completed, the HEMTT Gun Truck fits naturally into modern military collections, desert vehicle displays and scenes built around transport, escort or protected movement roles.
Military aeroplane models
Hercules C-130J C5 Aircraft Model Kit 1:48
510002746€79.99
The Hercules C-130J C5 from Italeri brings the familiar shape of the Hercules into a 1:48 aircraft model kit with the updated features of the later transport aircraft. At 62.1 cm long when completed, the finished build gives the high wing, tall fin and broad fuselage the visual weight that suits a large military airlifter on the bench or on display. This assembly kit focuses on the reworked C-130J configuration rather than an earlier Hercules version. The airframe is defined by 4 Rolls-Royce Allison AE2100D3 engines, each rated at 4700 HP, paired with 6-blade composite-material propellers. The cockpit reflects the avionics update with digital instruments and a Head-Up Display, so the model captures both the external and internal changes that marked the C-130J generation. A super decals sheet is supplied for 4 versions, supporting different finishing options with service markings, serials and stencil data. The subject represents the transport aircraft that has become standard in many NATO countries, including Italy. Long building sessions, painting work and decal placement make this kit suited to model makers who enjoy large aircraft subjects with visible structural presence. Paints, cement and tools are required separately.
Model tools
IronPoint Brush 1.0 mm Ball, model paintbrush
500908240€8.49
The IronPoint Brush 1.0 mm Ball brings a fine-format painting tool to model work where small areas and controlled handling matter. Its 1.0 mm ball tip gives hobby benches a focused option for placing paint on compact sections, edge lines and detail zones that benefit from a smaller contact point. Within model finishing setups, a brush like this supports careful colour work without shifting into broad coverage. The ball tip format suits measured application on parts that need accuracy rather than speed, making it useful for touch-ups, narrow accents and small painted elements. The slim working size also fits projects where different brush widths are used across separate stages, with the 1.0 mm format covering the finer end of that workflow. As a model supplies tool, it belongs alongside paints and other finishing essentials used to refine surface details. On the workbench, the brush suits detail passes on scale components, figures or decorative sections where clean placement counts. It also fits follow-up painting after assembly, when smaller areas need careful finishing or colour correction.
Model tools
IronPoint Brush 1.4 mm Ball, model brush
500908241€8.89
The IronPoint Brush 1.4 mm Ball brings a fine, controlled tool into model finishing, with a ball-shaped 1.4 mm tip that suits careful paint placement on small sections and detailed surfaces. In a hobby workspace, it fits naturally beside paints and parts where neat edges and measured brush movement matter. Its single-brush format keeps the choice straightforward when a specific tip size is needed for touch-ups, accents or compact painted areas. The ball tip shape supports close work around contours, raised details and narrow sections that benefit from a smaller contact point. For model-building enthusiasts, that makes it useful during colour application on figures, accessories or body details where broad coverage would be less precise. The product data states an assembly time unit, voltage unit and operating time unit at database level, but no usable values are provided for this brush, so the copy stays focused on the confirmed brush specification. On the bench, the IronPoint Brush can move from small correction work to deliberate detailing passes without changing to a larger format. The stated age marking is 14 Years, and the 1-brush pack suits replacing a worn detailing tool or expanding an established painting kit with a dedicated fine-tip option.
Model tools
IronPoint Brush 2.0 mm Ball Hobby Tool
500908242€8.99
IronPoint Brush 2.0 mm Ball is a precisely designated hobby tool from the Carson Modelsport range, defined in the data by its 2.0 mm ball format and single-piece pack count. That clear specification gives model-building enthusiasts a concrete reference when selecting tools for bench work that calls for a named tip size and shape. The available data is intentionally compact, so the description stays close to the verified facts. Both the ShortDescription and ShortDescriptionMM fields identify the same IronPoint Brush 2.0 mm Ball designation, which supports consistent catalogue recognition and straightforward matching when replacing an existing brush or adding a specific format to a workshop setup. The age marking is 14 Years, stated exactly as provided. The pack count is 1, making this a single brush rather than a multi-piece set. Within a model-building workspace, a clearly labelled 2.0 mm ball brush suits organised tool selection, whether the aim is maintaining a dedicated bench assortment or keeping a known format ready for repeat tasks. The concise specification makes this version easy to identify in storage, workshop drawers or project planning where exact naming matters.
Model tools
IronPoint Needle 0.5 mm, model tool tip
500908243€10.99
IronPoint Needle 0.5 mm Pointed is a fine model-making tool component with a clearly defined pointed tip for controlled work on small-scale tasks. The 0.5 mm size gives this needle a narrow working profile that suits precise contact in tight areas, whether the focus is detailing, touch-up work or other careful workshop steps. As a single needle version, it fits situations where a specific tip size is needed rather than a mixed set. The pointed shape supports exact placement on edges, corners and small sections that benefit from a slim tool profile. In a hobby workspace, a dedicated 0.5 mm needle can help keep processes consistent when the same fine format is required across repeated tasks. The stated minimum age is 14 years. On the bench, this kind of narrowly sized needle suits focused sessions where small parts and compact surfaces call for measured handling. It also works well as a spare kept alongside model supplies, ready when a matching pointed 0.5 mm needle is needed for continued project work.
Model tools
IT Plastic Modelling Beginner Tool-Set by Italeri
510050830€13.99
The IT Plastic Modelling Beginner Tool-Set from Italeri gathers 4 essential workshop tools into one focused starter set for plastic kit building. A brush, cutter, file and angled tweezer support the key hands-on steps that shape a cleaner build, from separating parts and refining edges to placing small components and handling detail work at the bench. The metal tweezer is suited to controlled pickup and placement where fingertips can block access to narrow contact points. The cutter helps remove parts during preparation, while the file works on edge cleanup and small surface corrections before joining sections. The brush adds a finer tool for detail painting and careful application on smaller areas. Together, these tools cover several of the routine actions that appear again and again during model assembly, making the set a practical entry point for builders who are starting with plastic kits. Assembly is required, with a stated assembly time of 600 minutes. The set fits naturally into work on scale models, miniatures and other detailed assembly projects where trimming, smoothing, positioning and fine brushwork all play a part in the finished result.
Model brushes
Italeri 00 Brush Synthetic Flat Single Pack
510052222€1.59
The Italeri 00 Brush Synthetic Flat Single Pack brings a narrow flat tip into detailed painting work, with short synthetic bristles that help place colour cleanly on small sections, edges and fine surface areas. The slim brush head and metal ferrule create a precise working end that suits careful coverage where a larger brush would be less exact. Its flat profile is useful for controlled strokes across raised details, trim lines and compact panels, while the short bristle length supports a steady response during close work. The dark blue handle gives the brush a clear, classic workshop look, and the orange bristles make the tip easy to read while loading paint and guiding each stroke. As listed in the product data, assembly is required and the stated assembly time is 600 minutes. The included component is an assembly kit. The age marking is 14 Years. This brush fits naturally into model benches, miniature painting sessions and other craft setups where a defined flat edge is needed for neat colour placement. It also works well as a dedicated shape for touch-up tasks, detail coats and other small-scale finishing steps within a longer painting routine.
Model brushes
Italeri 000 Synthetic Flat Brush Single Pack
510052221€1.49
The Italeri 000 Synthetic Flat Brush Single Pack brings a precise flat tip to model painting, with synthetic bristles shaped for controlled colour application on small sections and fine edges. Its compact brush head suits assembly kit work where narrow parts, raised details and tight corners need a cleaner stroke than a larger brush can deliver. The flat 000 format supports short, deliberate passes rather than broad coverage, making it useful for touch-ups, edge definition and careful blocking of small painted areas. A metal ferrule secures the bristles to the handle and gives the brush a familiar hobby-tool structure for steady handling during close work. The single-pack format adds one specific brush shape to an existing painting setup without duplicating larger sizes or mixed assortments. Assembly is required for the related kit context, with an assembly time of 600 minutes stated in the product data. On model benches, this brush fits moments where a narrow flat edge helps guide paint along panel lines, trim sections or compact surface details. It also suits finishing stages that call for measured coverage on small parts, where a fine synthetic tip can place paint with more control than a wider flat brush.
Model brushes
Italeri 1 Brush Synthetic Round Single Pack
510052204€1.79
Italeri 1 Brush Synthetic Round Single Pack brings a focused tool shape to detailed hobby painting, with synthetic bristles gathered into a fine round point for controlled work on narrow lines, edges and small painted sections. The dark blue handle, silver metal ferrule and orange tip give the brush a clear workshop look while keeping attention on the slim profile that suits close, careful application. The pointed head shown in the product data supports paint placement where broader brush shapes would spread colour too widely across a surface. The ferrule secures the bristle bundle at the transition from handle to tip, helping the brush keep its narrow working shape during detail work. As a single-pack brush, it fits naturally into an existing modelling or craft setup when one precise round profile is needed rather than a larger mixed set. Assembly is required, and the product data states an assembly time of 600 minutes. On model benches, craft tables and painting stations, this brush suits sessions that call for measured strokes on small parts and defined painted accents. The 14 Years age marking is stated in the product data for this assembly kit.
Model tanks
Italeri 15cm Panzerwerfer 42 auf SWS Kit
510006562€31.99
Italeri 15cm Panzerwerfer 42 auf SWS Kit brings a World War II half-track rocket launcher into 1:35 scale with a detailed plastic assembly project and a finished model length of 198 mm. The combination of the Schwerer Wehrmachtschlepper chassis and the elevated 15 cm launcher gives the build a strong mechanical profile, from the front wheel and armored cab to the rear track units and launch platform. The original vehicle was developed from the SWS as a medium half-track used for supply transport and light artillery towing, then adapted for other battlefield roles on its rear load area. In this version, the rear section carries a 10 barreled 15 cm Nebelwerfer 42 mounted above an armored ammunition storage compartment, which sets this subject apart from standard transport variants. The plastic kit format gives close attention to the contrast between the sloped armor, the open running gear layout and the compact launcher assembly. A new decal sheet adds technical markings, crosses, registration numbers and version-specific details for 2 finishing options. Across the workbench, the 600 minute assembly time supports a more involved build with room for careful painting, marking placement and subassembly work. Once completed, the 198 mm model fits naturally into a 1:35 military collection, whether placed alongside other half-tracks, artillery subjects or late-war armored vehicles.
Military aeroplane models
Italeri 1:12 F-104G Cockpit Model Kit
510002991€34.99
Italeri 1:12 F-104G Cockpit Model Kit brings the Starfighter's crew station into close focus with a build centered on the aircraft's distinctive instrument layout and seat arrangement. At 1:12 scale, the cockpit section reaches 14.7 cm in length and 9.0 cm in width, giving the finished assembly enough presence for the analog panels, side consoles and structural forms to read clearly. The kit contains 124 parts and is designed as an assembly project for ages 14 years and up. The subject draws on the Lockheed F-104 Starfighter, an interceptor known for its slender fuselage, compact wing area and service life that stretched from the late 1950s into the mid-2000s with some air forces. Inside the cockpit, the period character comes through in the detailed controls, the instrument panel layout typical of 1950s and 1960s fighters, and the accurately reproduced Martin Baker Mk.I Q ejection seat. Decals supply the cockpit dials, while adhesive acetate silk seat belts and clear parts for the visor, gunsight and radar scope add further finishing detail. Assembly time is listed at 600 minutes, making this a substantial bench project built around painting, fitting and detailing rather than a quick weekend build. The completed cockpit section suits display on a shelf, in a cabinet or alongside other aviation subjects, where the concentrated interior detail can be viewed from multiple angles.
Model trucks
Italeri 1:24 Container Auflieger 40Ft Kit
510003951€58.99
Italeri 1:24 Container Auflieger 40Ft is a detailed plastic kit that brings a standard freight trailer into scale form with a 50.5 cm finished length and the long proportions of a 40 ft container setup. The subject draws on the container format used across ships, trains and trucks, so the completed build carries the look of real intermodal transport into a shelf display or diorama scene. The assembly kit focuses on the structure and finish of a commercial trailer rather than a racing or military vehicle. Molded parts form the chassis, underframe and running gear, while the container body adds the tall corrugated profile seen in modern freight handling. The decal sheet goes beyond large side logos by adding technical capacity markings, caution labels, speed signs and multiple registration details that sharpen the industrial character of the model. A color instructions sheet guides the painting stage, and the stated assembly time of 600 minutes makes this a substantial bench project with room for careful fitting, painting and decal placement. Placed beside a warehouse backdrop, loading bay or road transport scene, the finished trailer suits modern logistics layouts with a clear commercial theme. It also works as a companion build for 1:24 truck subjects, where the container trailer adds scale length and freight context to a complete transport combination. Warning! Not suitable for children under 14 years.
Model trucks
Italeri 1:24 US Wrecker Truck Model Kit
510003825€69.99
Italeri 1:24 US Wrecker Truck is a scale model kit that brings a classic American heavy recovery vehicle into a detailed build format. At 34.5 cm long in finished form, the model has the size to show the proportions of the cab, the multi-axle rear section and the prominent recovery structure in a clear, workshop-style silhouette. The subject draws on the truck types used on US roads to handle breakdowns and transport damaged vehicles when roadside repairs are not enough. Numerous side compartments are represented as part of the body design, echoing the storage areas used for tools and repair materials on full-size wreckers. The rear section is shaped around heavy-duty towing equipment, giving the model its defining working character. The kit format also leaves room for painting and finishing work, with separate colours and weathering materials recommended in the source data for builders who want to develop surface detail further. With a recommended age of 14 Years and a stated assembly time of 600 minutes, this build suits a slower bench session with attention on fit, paintwork and final presentation. On a shelf, in a garage-themed diorama or alongside other 1:24 commercial vehicle subjects, the completed wrecker carries the visual weight of a dedicated recovery truck rather than a standard road hauler.
Model trucks
Italeri 1:24 Volvo FH4 Globetrotter XL Kit
510003940€74.99
The Italeri 1:24 Volvo FH4 Globetrotter XL kit brings a modern long-haul tractor unit into scale form with 100% new moulds, a 24.6 cm finished length and the tall Globetrotter XL cab that defines the full-size truck's road presence. The plastic kit captures the FH4's aerodynamic shape while giving the build a strong visual focus through the high-roof cabin, the chassis layout and the distinctive Volvo front end. Beyond the outer bodywork, the kit develops its detail through several separate areas of the truck. The driver door can be built open or closed, which changes how the interior is presented in the finished model. The cab structure also supports a more technical display of the truck's architecture, while the detailed engine and frame add substance beneath the body. Waterslide decals supply FH Year Edition graphics, dashboard markings, country identifiers and multiple European-style registration options, allowing different finishing directions within the same subject. The box also contains photo etched parts for finer metal-style detail. On the workbench, this 1:24 truck kit suits a measured build with painting, decal placement and detail finishing spread across stages rather than rushed into one session. Once completed, the Volvo FH4 Globetrotter XL sits naturally in a commercial vehicle collection, on a shelf beside other 1:24 transport subjects, or as a standalone display focused on modern European truck design. Paints, cement and tools are required separately.
Model tanks
Italeri 1:35 1/4 Ton 4x4 US Ambulance Vehicle
510000326€11.99
Italeri 1:35 1/4 Ton 4x4 US Ambulance Vehicle captures a field-converted military jeep in a compact 11.8 cm scale model that brings the ambulance role of this well-known 4x4 into clear focus. The assembly kit centers on the distinctive rescue layout, where the familiar open vehicle form is reworked with stretcher-carrying structures and medical insignia for a markedly different silhouette. The 1:35 scale suits detailed finishing work, especially across the body panels, grille, wheels, cabin area, and external ambulance fittings visible in the kit presentation. Decals for 2 versions open two historically themed directions, covering U.S. 2nd Armoured Division Normandy 1944 and British Army Normandy 1944. That choice changes the final look through unit markings and insignia rather than altering the core vehicle, which keeps the build focused while still offering variation. Assembly takes 600 minutes, giving time for careful handling of the construction stages and for a measured paint approach across the military surfaces and medical markings. On a shelf, the completed ambulance jeep reads clearly as a support vehicle rather than a standard utility 4x4, with its stretcher layout setting the scene at a glance. In a 1:35 display, it can anchor a Normandy-themed arrangement, sit beside other military vehicles, or stand alone as a compact historical model with a strong service identity.
Military figures & accessories
Italeri 1:35 20' Military Container Model Kit
510006516€21.99
The Italeri 1:35 20' Military Container model kit brings a standard military logistics element into scale scenes with a completed length of 17.4 cm, corrugated wall panels and detailed end-door hardware that gives the container a convincing industrial look. One end door can be shown opened, adding visible access to the interior and giving loading bays, transport yards and support areas a more active layout. This assembly kit is based on a 100% new mould and centers on the structure of a real 20-foot freight container, a format used across ship, rail and truck transport because its standardized dimensions support intermodal handling. The model translates that familiar full-size form into 1:35 scale for military dioramas and vehicle displays. Decals for 3 versions provide specific marking paths for U.S. Army, U.S. Marine Corps and Italian Air Force finishes, including ownership markings, serial codes and load data panels. Assembly time is listed as 600 minutes. Paints, cement and tools are required separately. Placed beside military vehicles, stacked in a depot scene or used as a standalone cargo detail, the container adds context that connects transport, storage and ground support activity. The open-door option also suits loading or maintenance setups where the interior needs to remain visible during display.
Military figures & accessories
Italeri 1:35 Observation Post Model Kit
510000418€9.49
The Italeri 1:35 Observation Post model kit brings vertical structure and field detail into a scale scene with an elevated lookout design, a ladder, an upper platform and a roofed top section. As an assembly kit, it focuses on the build itself, with unassembled parts arranged on sprues and a finished form that reads clearly as a raised post for dioramas and display settings. The 1:35 scale makes the Observation Post easy to combine with military vehicles, figures and terrain elements in the same proportion. Cross-braced side frames define the support structure, while horizontal beams connect the main body and create the base for the upper level. Wood-textured panels shape the enclosed section and give painted finishes more depth across planks, edges and weathered effects. The roof panel sits above slim supports, adding another distinct layer to the silhouette and helping the structure stand out in open layouts. With 600 minutes of assembly time, this kit suits model builders who want a focused construction project rather than a quick accessory add-on. The finished tower can anchor a checkpoint scene, overlook a camp perimeter or add height variation beside vehicles, figures and ground cover. On a shelf or in a diorama, the ladder access, raised stance and sheltered top platform create a clear visual focal point within a 1:35 setting.
Model tanks
Italeri 1:35 WWII US Off-Road Support Vehicle
510000314€15.99
Italeri 1:35 WWII US Off-Road Support Vehicle brings a classic light military vehicle into a compact scale build with a finished model length of 14 cm. The assembly kit combines the jeep with a trailer, creating a small convoy-style subject that carries the look of wartime transport and support equipment in one display piece. The 1:35 scale gives the body, wheels, trailer structure, and exterior fittings enough presence for careful painting and weathering work. The kit is designed for assembly and lists a build time of 600 minutes, making it suited to a longer bench session with steady progress across chassis, body sections, and smaller details. Decals for 1 version are included for the finishing stage, adding the markings that complete the chosen scheme. The source material behind the vehicle reflects the wartime development of a light multi-purpose 4x4 and the broad service history that made this type one of the most widely produced military light vehicles of the period. On a shelf, in a cabinet, or as part of a 1:35 diorama, the combination of vehicle and trailer creates a focused historical scene with more visual depth than a standalone jeep. The compact footprint also leaves room to place terrain, figures, or other period accessories around the completed build. Minimum age: 14 years
Military aeroplane models
Italeri 1:48 HURRICANE Mk.I Plastic Kit
510002802€41.99
The Italeri 1:48 HURRICANE Mk.I is a detailed plastic kit built around one of the Royal Air Force's defining fighters from the opening phase of World War II. At 20.5 cm long, the finished aircraft brings the compact proportions of the Hawker Hurricane into a scale format that suits both focused bench work and display once complete. The subject reflects the Hurricane Mk.I configuration with a Rolls-Royce Merlin 12-cylinder liquid-cooled engine rated at more than 1,000 HP and an armament layout of eight 7.7 mm Browning machine guns. In service, this fighter exceeded 500 km/h and played a major role during the Battle of Britain alongside the Spitfire. The kit also comes with super decals for 4 versions, opening different marking paths for the same airframe and giving the finishing stage a stronger historical angle. A color instruction sheet supports paint placement and decal application with visual guidance across the build. On the workbench, the 1:48 scale gives enough room to develop paintwork, markings, and small details without demanding the footprint of a larger aircraft model. Once assembled, the Hurricane's wing shape, cockpit area, and wartime profile make it a natural centrepiece for a World War II aircraft lineup, whether displayed on its own or alongside other RAF subjects. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri 1:48 US F-22A Raptor model kit
510002822€34.99
Italeri 1:48 US F-22A Raptor captures the distinctive form of the Lockheed Martin-Boeing stealth fighter in a detailed plastic model build. The sharply angled surfaces, twin vertical stabilizers and compact fuselage layout give the finished aircraft the unmistakable silhouette of a 5th generation USAF jet, creating a striking presence on the workbench and in a display cabinet. The full-size F-22 is powered by 2 Pratt & Whitney F119 turbofan engines with afterburners and vector thrust through the exhaust nozzles, and this kit draws on that advanced aircraft design for its overall shape and technical character. The original aircraft combines aerodynamic profiling with high-tech materials to reduce radar detectability, while the intake and exhaust design also supports lower heat and noise signatures. Internal loading bays for air-to-air and air-to-surface armament are another defining feature of the aircraft concept, and the advanced avionics are built for long-range target detection, tracking and acquisition. In the model, these design cues translate into a build centered on modern combat-aircraft geometry rather than exposed external stores. With an assembly time of 600 minutes, the kit offers a substantial project for model builders aged 14 years and up. The included assembly kit is supported by a decals sheet for 3 marking versions, adding unit insignia, serials, rescue markings and weapons stencils that sharpen the final finish. Paints, cement and tools are required separately. Warning! Not suitable for children under 14 years.
Model tanks
Italeri 1:56 US M4 Sherman 75 mm Model Kit
510025751€21.99
The Italeri 1:56 US M4 Sherman 75 mm model kit brings one of the most widely used American medium tanks of the Second World War into a compact 10.2 cm format. This 43-part assembly kit captures the early Sherman M4A1 configuration with its rounded hull, cast turret and 75 mm gun, giving the finished tank the distinctive profile seen on wartime vehicles from 1942. The build centers on core armored vehicle elements such as the upper and lower hull, turret assembly, running gear and track sections. Instruction imagery shows hatch position options and turret installation into the circular hull opening, adding mechanical interest during construction. Decals for 2 versions allow the finished model to be completed with U.S. Army markings or an alternative Russian Army WWII scheme. The included assembly kit is intended for model builders aged 14 years and over. On the workbench, the 1:56 scale keeps the project manageable while still leaving room for painted details across the hull, turret and tracks. Once completed, the Sherman sits well in military model displays, diorama scenes or focused World War II collections, where the compact footprint and recognizable silhouette make it easy to place alongside other armored vehicles. Paints, cement and tools are required separately. Warning! Not suitable for children under 14 years.
Model figures
Italeri 1:72 100 Years War British Warriors
510006027€10.99
Italeri 1:72 100 Years War - British Warriors brings a key medieval force into miniature form with an assembly kit centred on the British side at Agincourt. The 1:72 scale gives the set a compact footprint for display shelves, historical layouts and battle dioramas while still leaving room for visible armour, weapons, shields and horse tack once the parts are finished. The subject draws on the battle of 25 October, when Henry V's army faced the forces of Charles d'Albret, and the set reflects that mix of foot troops and noble mounted fighters. Archers, infantry figures, rider poses, horses and a banner create a broader battlefield composition than a single troop type alone. The longbow is a defining element of the historical theme, linking the figures directly to the English tactic described in the source material. Unpainted components arrive on sprues and are intended for clipping, assembly and painting as part of the modelling process. Assembly is required and takes 600 minutes. Once completed, the figures can be arranged into defensive lines, marching groups or cavalry-supported scenes with sharpened stakes, shields and heraldic details added through finishing work. The set suits medieval collections, wargame-style table scenes and diorama builds that focus on the 100 Years War. Age 14+
Military figures & accessories
Italeri 1:72 2nd WW German Paratroopers Kit
510006045€10.99
Italeri 1:72 2nd WW German Paratroopers is an assembly kit built around 50 scale figures for World War II scene building. The 1:72 format gives dioramas, battlefield layouts, and historical displays a compact troop presence, while the unpainted parts leave room for individual finishing choices across uniforms, equipment, and weapons. The set draws on the history of German Fallschirmjager, whose operations included the conquest of Crete during Operation Merkur in May 1941 and the fighting at Montecassino in March 1944 under General Kurt Student's 1st Division Fallschirmjager. That background gives the figures a defined military setting for recreating airborne actions, elite infantry positions, or defensive scenes among damaged buildings and rubble. The assembly time is stated as 600 minutes, so the build can be approached as a longer modelling project with separate stages for removing parts from the sprues, preparing joins, and painting the finished figures. Placed across fortifications, ruined monasteries, or urban combat layouts, the 50-figure count helps larger 1:72 scenes feel populated rather than sparse. The mix of poses supports movement, cover, and firing positions, which adds rhythm and direction to historical displays on shelves, in cabinets, or as part of a wider military collection.
Military aeroplane models
Italeri 1:72 F-22 Raptor Aircraft Model Kit
510001207€19.99
The Italeri 1:72 F-22 Raptor assembly kit captures the angular form of the U.S. Air Force air superiority fighter in a compact aircraft model with a finished length of 24 cm. Its stealth-style layout, swept surfaces and twin tail fins give the build a crisp modern profile that stands out during assembly and once placed on display. The subject is presented as a 1:72 scale model, a format that brings the aircraft's proportions into a manageable size for bench work while still leaving room for surface finishing and markings. The F-22 design is described with internal weapons carriage inside the fuselage, a detail tied to reduced radar detection and cleaner aerodynamic lines. Source information for the aircraft also points to advanced engine technology that enables supersonic speed without afterburners, along with sophisticated electronic equipment for weapons control, giving the finished build a strong connection to the real aircraft's role and engineering. With assembly required and a stated build time of 600 minutes, this kit suits focused sessions of cutting, fitting, painting and applying the included decal sheet for 1 version. On the bench, the compact 24 cm size keeps the project easy to handle, while the finished aircraft shape gives shelves, desks and display cabinets a clear modern aviation focal point. Warning! Not suitable for children under 14 years.
Model figures
Italeri 1:72 French Heavy Cavalry Model Kit
510006003€10.99
Italeri 1:72 French Heavy Cavalry brings Napoleonic mounted troops into a compact model kit that combines historical subject matter with hands-on building. The set builds 17 horsemen, creating the look of a heavy cavalry formation with riders, horses and battlefield movement captured at 1:72 scale. The subject draws on the French heavy cavalry arm in which carabiners served alongside cuirassiers, troops known for their shining cuirasses and imposing battlefield presence. Mounted poses with sabres, lances and a trumpet figure give the formation visual variety while keeping the unit coherent for display. The unassembled parts are arranged on sprues, which helps separate preparation, painting and final fitting into clear stages across the build. Assembly is required, and the stated build time is 600 minutes. The kit is marked 14 Years, matching its scale-model focus and detailed construction format. On a shelf, in a historical diorama or as part of a larger Napoleonic scene, the completed cavalry unit adds motion and structure to the setting. The troop formation works well beside infantry, artillery and terrain pieces, whether the aim is a Borodino-inspired reserve line or a Waterloo-era charge composition.
Military figures & accessories
Italeri 1:72 German Infantry Figure Set
510006033€10.99
Italeri 1:72 German Infantry brings a full formation of 50 figures into World War II model scenes, with feldgrau uniforms and period infantry equipment that give the set a clear historical identity on the workbench and in the finished display. The 1:72 scale fits naturally into compact battlefield layouts, convoy scenes, and wider diorama compositions where troop density matters. The figures are supplied as an assembly kit and require about 600 minutes for assembly, making this set suited to builders who want a substantial figure project rather than a quick single-session task. The subject represents Wehrmacht infantry units used on European and North African fronts from 1939 to 1945, which opens up a broad range of historically grounded scene planning. Different poses visible on the sprues support marching, advancing, kneeling, aiming, and support-position arrangements. Uniform gear shown across the figures includes combat loadout details such as pouches, packs, and helmets that add depth once painted. Mauser K-98 rifles and MP40 submachine guns give the set recognizable small arms for period-specific staging. The figures can be arranged around vehicles, buildings, terrain sections, or defensive positions to create movement, scale, and narrative across a military display. Age marking: 14 Years.
Military aeroplane models
Italeri 1:72 Ju-52/3m Aircraft Model Kit
510000102€34.99
Italeri 1:72 Ju-52/3m is a detailed aircraft model kit built around one of the most recognizable transport aircraft designs of the 1930s and 1940s. The tri-motor configuration, broad wing layout, and corrugated metal fuselage panels give the finished model a strong period character, whether placed in a collection cabinet or worked into a historical diorama. The assembly kit uses plastic parts and clear molded sections for the glazed areas, with the build progressing through fuselage, wing, tail, and upper detail stages shown across the instruction sequence. Version-specific parts support different historical finishes, and the decal guide covers 3 schemes: a Luftwaffe medical evacuation aircraft from fall 1939, a KG 500 aircraft from the Stalingrad pocket airlift in winter 1942/43, and a transport used during Unternehmen MERKUR on Crete on 20 May 1941. The box data also states that 6 figures are included, adding extra context for display scenes around the completed aircraft. With 1:72 scale proportions, the model suits shelves, aviation collections, and compact diorama layouts while still leaving room for camouflage work, insignia placement, and weathering detail. Assembly is required, with a stated assembly time of 600 minutes, and the age marking is 14 Years. Paints, cement, and tools are required separately. Warning! Not suitable for children under 14 years.
Model figures
Italeri 1:72 Napoleonic Wars French Infantry
510006066€11.99
Italeri 1:72 Napoleonic Wars - French Infantry brings a full historical troop set into miniature form with 48 figures designed for assembly. The 1:72 scale gives enough presence for battlefield layouts while keeping the footprint compact for shelf displays, campaign scenes or wargaming tables. The set draws on French line infantry from the Napoleonic Wars, a formation style defined by close-order advance and support from light units. The source theme names Chasseur, Tirailleurs and Voltigers as part of that wider battlefield context, opening the door to scenes that show pressure on enemy lines, command disruption and shifting formations. On the sprues, the figures appear in a range of action poses including marching, aiming, kneeling and advancing, with a drummer and a standard bearer adding command and signal detail to the group. The unpainted parts leave room for regiment colours, weathering and basing choices to shape a specific campaign look. Assembly is required, and the stated assembly time is 600 minutes. Once built, the figures suit dioramas, historical displays and tabletop battle setups where ranked infantry, skirmish elements and command figures need to read clearly at a glance.
Military aeroplane models
Italeri 1:72 US P-51A Mustang Model Kit
510001423€16.99
The Italeri 1:72 US P-51A Mustang model kit brings one of the best-known piston engine fighters of World War II into a compact aircraft build with strong historical character. This assembly kit focuses on the early P-51A variant, the version that entered service in 1942 with the Allison V-1710 engine and a top speed of 650 km/h, giving the finished model a clear place in the Mustang story. The subject itself adds depth to the build. The real aircraft carried 4 wing-fitted 12.7 mm Browning machine guns and could be equipped with 2 underwing fuel tanks for extended range, details that shape the look and role of the model. The kit also opens up 6 finishing versions, spanning U.S. Air Force and RAF service, including the Mustang Mk.II designation. Decal choices cover serial numbers, national insignia, squadron markings, invasion stripes and nose art, so each scheme can take on a distinct wartime identity. At 1:72 scale, the model fits easily into a display cabinet, on a shelf or into a wider World War II aviation lineup. The 600-minute assembly time gives space for careful work on the cockpit, airframe and final paint finish, whether the goal is a clean historical presentation or a more weathered combat look. Recommended age: 14+ Warning! Not suitable for children under 14 years.
Military figures & accessories
Italeri 1:72 WW2 British Infantry Figure Set
510006056€10.99
Italeri 1:72 WW2 British Infantry brings a D-Day themed figure set into a compact scale that suits detailed military scenes and historically focused collections. The set contains 42 figures and centres on British Expeditionary Force troops linked in the source material to the Normandy landings at Sword, Juno, and Gold, giving the build a defined World War II setting rather than a generic infantry theme. The figures arrive as an assembly kit on sprues, so the build involves removing the parts, assembling the miniatures, and preparing them for painting and placement. An assembly time of 600 minutes points to a substantial hobby project with room for careful finishing across the full group. The 1:72 scale works well for combining infantry with vehicles, terrain pieces, and beach assault layouts from the same period. Different body positions visible across the set help create movement in a scene, with figures posed for advancing, kneeling, aiming, and supporting battlefield actions. On a shelf, in a cabinet, or across a larger diorama base, the 42-figure count gives enough material to shape a landing sequence, defensive line, or marching formation with more visual variation. The historical framing around Caen and the Normandy beaches also supports period-specific painting choices and display planning for collectors and model builders aged 14 years and up.
Military figures & accessories
Italeri 1:72 WW2 German Elite Troops Model Kit
510006068€13.99
Italeri 1:72 WW2 - German Elite Troops (SS) is an assembly kit built around a specific late-war setting, placing 48 figures into the Ardennes offensive in Belgium on 16 December 1944. The 1:72 scale suits compact battle layouts while still leaving room to stage infantry movement, firing lines, and support positions across a diorama base. The historical reference in the kit points to the Wacht am Rhein offensive under General Von Rundstedt and to the siege of Bastogne on 21 December 1944, where the 101st Airborne Division defended the town. That context gives the set a clear place within Western Front collections rather than a generic infantry role. Uniform and equipment details support that focused theme, and the figure group is shaped for varied scene building instead of a repeated row of matching poses. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the set supports painting, basing, and terrain work for winter combat scenes, fortified positions, and small-scale historical displays. Once assembled, the figures can be arranged as a concentrated combat unit, spread through woodland cover, or combined with vehicles and structures in 1:72 scale collections.
Military figures & accessories
Italeri 1:72 WWII American Infantry Model Kit
510006046€10.99
Italeri 1:72 WWII American Infantry is an assembly kit that brings the look of the 1st Infantry Division into a compact scale suited to military dioramas and historical displays. The set contains 50 figures, giving enough miniatures to build a broad infantry presence with movement, spacing, and unit variety across a scene. The figures are represented with the typical equipment of American infantry during World War II, including the M1 Garand rifle, the B.A.R. automatic rifle, the M3 'Grease Gun' submachinegun, and the Bazooka. That mix supports different battlefield roles within the same set, from riflemen and automatic fire support to close-range submachine gun poses and anti-tank coverage. The 1:72 scale works well for combining the figures with vehicles, terrain pieces, and structures in the same scale. Assembly is required and takes 600 minutes. The kit comes as an assembly kit and the parts are supplied unpainted, leaving the finish open for historically inspired uniform colours and scene-specific detailing. The campaign background reaches from Operation Torch in November 1942 to Sicily, Normandy on June 6th 1944, the Ardennes, and the final advance into German territory in 1945. That span makes the set suitable for beach landings, winter battle layouts, road marches, or urban combat scenes where varied infantry poses help shape a more convincing composition.
Military figures & accessories
Italeri 1:72 WWII American Infantry Model Kit
510006120€12.49
Italeri 1:72 WWII American Infantry brings a large formation of U.S. Army soldiers into a compact military model kit, with 48 unpainted figures arranged for historical scenes inspired by Operation Overlord. The 1:72 scale suits dioramas where troop movement, spacing, and battlefield structure matter, whether the layout focuses on a shoreline assault, an inland advance, or a defensive firing line. The set draws on the 1st and 29th Infantry Division, part of the Fifth Corps, and connects directly to the June 6th, 1944 landing at Omaha Beach between Vierville sur Mer and Sainte Honorine des Pertes. Across 3 sprues, the figures appear in varied action stances that help shape a more convincing unit composition instead of a repeated row of identical soldiers. Uniform gear and weapon handling reflect typical U.S. infantry equipment from the period, while the mix of rifles, automatic weapons, and support gun positions gives the group a clear battlefield character. The parts arrive unpainted, leaving full control over colour scheme, weathering, insignia style, and terrain matching. With a stated assembly time of 600 minutes, this kit suits longer bench sessions focused on trimming, painting, and arranging figures into a coherent scene. It can anchor a Normandy landing display, reinforce a larger World War II terrain build, or expand an existing 1:72 military collection with a substantial infantry presence. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri A-10 Gulf War Aircraft Model Kit 1:72
510101376€22.99
Italeri A-10 Gulf War brings the unmistakable lines of the A-10 Thunderbolt II into a 1:72 scale aircraft model kit with a finished length of 22.6 cm. The twin-engine ground-attack aircraft layout, straight wing planform and compact display size give the completed build a strong presence on a shelf, desk or in a wider military aviation collection. The subject draws on the A-10 developed by Fairchild Republic for close air support missions, with the type's heavily armoured design, 30 mm GAU-8/A Avenger cannon and broad external stores capacity forming the historical basis of the model. Eleven underwing and under-fuselage pylons defined the real aircraft's offensive load potential, and that combat-focused configuration shapes the character of this kit. The included super decals sheet covers 4 versions, with marking choices spanning Gulf War-era A-10A aircraft and later A-10C schemes shown in the reference material. Assembly is required, and the stated build time is 600 minutes. That combination of scale, subject and marking choice suits builders who enjoy military aircraft with a clear operational identity. During painting and finishing, the 4-version decal selection opens different visual directions, from desert-war context to later service appearances, while the 22.6 cm format keeps the completed aircraft easy to place in a cabinet or alongside other 1:72 aviation builds.
Military aeroplane models
Italeri A-20B / Boston III Aircraft Model Kit 1:48
510002656€45.99
The Italeri A-20B / Boston III assembly kit captures the lines of the twin-engine Douglas aircraft in 1:48 scale, combining a glazed bomber nose, tricycle landing gear layout and period camouflage options in one detailed aircraft build. Fine exterior molding and transparent sections give the fuselage, cockpit and nose area the layered look that defines this WWII design. The kit is built around multiple sprues with dedicated clear parts, separate tail components, engine nacelles, propellers, landing gear elements and external stores. Version-specific parts support several historical finishes, and the decal sheet covers 5 liveries including RAF, Free French and USAAF aircraft. The instructions also call for 30 g of nose weight to support the model's stance after assembly. Bomb bay configuration can be handled in different ways, with an open or closed layout shown in the build sequence, and the underside can also carry the optional long range tank. Figures are not included. On the bench, the 600 minute assembly time leaves room for careful trimming, painting and decal placement across the framed canopy, engine fronts and wing surfaces. Once completed, the 1:48 scale format gives the Boston III / A-20B enough presence for a display shelf while still leaving space to appreciate details such as squadron markings, invasion stripes or the Lady Jean nose art from the included options. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri A-26B Invader Aircraft Kit 1:72
510001274€36.99
The Italeri A-26B Invader in 1:72 scale brings the lines of Douglas' twin-engine attack aircraft into a compact model kit with a strong historical identity. This detailed aircraft build focuses on the B variant, the most widely produced version of the Invader, known for its heavily armed closed nose and its long operational career across several major conflicts. The original aircraft entered frontline service in 1944 and remained in use well beyond World War II, appearing later in the Korean, Indochina and Vietnam wars. That long service life gives the A-26B Invader a broad historical context that stands out in a collection of military aircraft. The source aircraft was powered by 2 Pratt & Whitney R-2800 Double Wasp radial engines, each rated at 2000 horsepower. At full operational load, the Invader could reach 570 km/h, a figure that underlines the performance behind its purposeful airframe. Marking options add another layer of detail to the finished model, with a super decal sheet for 4 versions included in this new decals edition. The 1:72 scale keeps the aircraft manageable on the workbench and easy to place in a display cabinet alongside other aviation subjects. Recommended age: 14 years. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri A-4E/F/G Skyhawk Aircraft Model Kit 1:48
510002826€35.99
The Italeri A-4E/F/G Skyhawk in 1:48 scale recreates one of the best-known light attack aircraft of the 1950s in a format that suits detailed bench building and display. Its compact Douglas airframe, low-mounted delta wing configuration and side-mounted air intakes give the finished model the lean, agile look that made the original Skyhawk a familiar sight on aircraft carriers. This assembly kit covers A-4E, A-4F and A-4G versions and draws on service histories that reached beyond the United States to operators including Australia, New Zealand, Kuwait and Israel. The real aircraft used a single Pratt & Whitney J52 turbojet engine and carried 2 20 mm guns, with hard points under the wings and fuselage for missiles, rockets and bombs; those operational traits shape the character of the model and its external stores. Paint and marking references in the set show multiple liveries, including naval and air force schemes with unit insignia, serials and warning stencils. Kit, instructions and decor are included. With a stated assembly time of 600 minutes, the build lends itself to steady work sessions focused on airframe alignment, surface finishing and decal application. On a shelf, desk or in a larger aviation collection, the completed Skyhawk brings carrier-era jet history into a clear 1:48 display presence.
Military aeroplane models
Italeri A-6E TRAM Intruder Aircraft Model Kit 1:72
510101392€27.99
Italeri A-6E TRAM Intruder captures the look of the U.S. Navy attack aircraft in 1:72 scale, translating the broad fuselage, side-by-side cockpit layout and carrier-based profile into a 23 cm display build. The subject represents the A-6E TRAM version, the variant fitted with the laser target designation system that defined the later Intruder's all-weather strike role. The assembly kit uses molded parts on multiple sprues and includes a clear sprue for canopy elements, plus a super decals sheet for 2 marking options. The airframe can be finished as a U.S. Marines aircraft from Shaikh Isa Air Base, Bahrain, 1992 or as a U.S. Navy aircraft from USS America, 1976. Instruction diagrams also indicate 20 g of ballast in the nose during assembly, a practical detail that helps the completed aircraft sit correctly on its landing gear. Underwing pylons, tanks and weapon stores add configuration depth, while the decal sheet extends the finish with walkway markings, serials, insignia, cockpit instruments and weapon stencils. With an assembly time stated as 600 minutes, the build suits a slower, step-by-step approach at the workbench. The finished model works equally well as a Gulf War themed display aircraft, a U.S. naval aviation subject, or a painting project focused on camouflage, panel detail and squadron markings.
Military aeroplane models
Italeri A-7E Corsair II Model Kit 1:48 Scale
510002797€39.99
The Italeri 1:48 A-7E Corsair II model kit captures the distinctive lines of the U.S. Navy light attack aircraft in a 29.0 cm format that gives the finished build a strong shelf presence. Built from ESCI moulds, the assembly kit focuses on the final A-7E version, known for its carrier-based role, its large frontal air intake under the cockpit and its 35° swept wing with foldable outer sections on the full-size aircraft. The subject matter adds historical depth as well as visual character. The real A-7E was developed to replace the Douglas A-4 Skyhawk and A-1 Skyraider, and its operational configuration expanded to carry conventional bombs, guided Paveway bombs and air-to-surface missiles. On the full-size aircraft, a Head-up-Display formed part of the updated combat equipment, while underwing hardpoints defined its attack role. The included super decals sheet opens 4 finishing versions, with markings shown for U.S. Navy squadrons including VA-72 Blue Hawks, VA-22 Fighting Redcocks and VA-83 Rampagers. With a stated assembly time of 600 minutes, the build suits modelmakers who enjoy a project with room for careful painting and decal work. The 1:48 scale gives enough surface area for squadron markings, service stencils and camouflage contrasts to stand out across wings, fuselage and tail. Paints, tools and cement are required separately.
Military aeroplane models
Italeri A-7E Corsair II Model Kit 1:72 Scale
510001411€22.99
Italeri A-7E Corsair II brings a classic U.S. Navy light attack aircraft into 1:72 scale with a finished length of 195 mm and the compact proportions that suit shelf display, cabinet presentation or a focused aircraft lineup. The assembly kit captures the A-7E, the final U.S. Navy production version of the Corsair II, with the broad intake under the cockpit and the swept wing layout that defined the aircraft on carrier decks. The original aircraft was developed in the first half of the 1960s to answer a U.S. Navy requirement for a new carrier-capable light attack aircraft, replacing the Douglas A-4 Skyhawk and the piston-powered Douglas A-1 Skyraider. It was derived from the Vought F-8 Crusade airframe and combined a 35° foldable swept wing with underwing hardpoints for conventional bombs, guided bombs such as Paveway, and air-to-surface missiles. On the A-7E version, improved operational capability also included compatibility with Harpoon anti-ship missiles and AGM-88 HARM anti-radiation missiles. The color instruction sheet supports the painting stage, while the decal sheet covers 4 versions with squadron and stencil detail. The 600-minute assembly time suits a build approached in stages, from cockpit and fuselage work to wing assembly and final markings. Once completed, the model fits naturally into Cold War naval aviation collections, U.S. Navy aircraft displays, or dioramas centered on carrier air wing subjects.
Military helicopters
Italeri AB 212/UH-1N Helicopter Model Kit 1:48
510002692€25.99
Italeri AB 212/UH-1N is a 1:48 assembly kit that recreates a medium utility helicopter with a finished model length of 36 cm. The subject traces back to the twin-turbine UH-1N family developed by Bell Helicopter at the end of the 1960s, while the AB-212 designation identifies the licensed Italian-built version produced by Agusta Westland. The airframe is defined by a 2-blade rotor and a fuselage extended beyond model 205, giving this helicopter its distinctive profile. Power in the full-size aircraft comes from 2 Pratt & Whitney PT6T turboshaft turbines rated at 1.342 kW, a technical detail that helps place the type within the utility and military transport class. The kit also draws on the later operational update applied in the first half of the 2000s, when the AB 212 received equipment to expand mission capability. That configuration introduced 2 swivelling 7.62 mm machine guns on the tailgates, antimissile flare launchers, and additional ceramic and kevlar armour for crew protection. These details connect the build to real service use, including Italian AB 212 helicopters employed in Afghanistan from 2006 within the International Security Assistance Force mission. On the bench, that background gives extra meaning to the painting and decal stages, whether the focus is historical context, technical shape, or military aviation display. Paints are required separately. Warning! Not suitable for children under 14 years.
Military figures & accessories
Italeri Accessories model kit 1:35 scale set
510000407€9.49
Italeri 1:35 Accessories is a model kit built to add field equipment and combat detail to military dioramas. The set combines miniature weapons, storage pieces and personal gear in one scale, so vehicle displays, infantry positions and terrain sections can be arranged with more visual structure and period character. Among the included parts are an 81 mm mortar with ammunition boxes, Browning M1919 A4 machine guns, BREN Mk. II guns, Thompson M1928 A1 submachine guns, Sten Mk. II guns, Garand M1 rifles, Lee-Enfield Mk. I rifles, Winchester M1 rifles and a 60.3 mm bazooka. The set also adds helmets, grenades, binoculars, pouches, sacks, satchels, a jerry can and several wooden and metal crates. This mix supports different scene layouts, from a dug-in firing point to a supply area beside a parked vehicle. Because the parts are all scaled to 1:35, they can be distributed across terrain, figures and vehicle surroundings without breaking the visual proportion of the build. The 600-minute assembly time points to a project with room for careful preparation, painting and placement. On a shelf, the accessories can frame a tank, truck or artillery piece with extra context. On a diorama base, the same parts can mark out ammunition storage, infantry equipment drops or a support weapon position, giving the finished scene more depth than a vehicle-only display.
Model paints
Italeri Acrylic Paint Flat Dark Earth 20 ml
510004303€3.69
Italeri Acrylic Paint Flat Dark Earth 20 ml brings a muted matte tone to model finishing work, giving builders a focused colour choice for surfaces that call for an earthy, non-gloss appearance. The 20 ml bottle size suits careful paint use across detail stages, touch-ups and broader colour blocking on an assembly kit. The acrylic paint format supports measured application, which helps when working around panel lines, edges and smaller shaped sections. Flat Dark Earth fits naturally into military subjects, terrain sections and weathered scene elements where a subdued brown tone is needed. The matte character keeps the finish visually restrained rather than reflective, which can help painted sections sit more convincingly alongside dust effects, field equipment tones or ground textures. With assembly required and a stated assembly time of 600 minutes, the paint aligns well with longer model projects that move through construction, surface preparation and final colour work. During bench sessions, the 20 ml volume is practical for repeated use across separate stages instead of a single pass. The 14 Years marking is stated in the product data, making the listed age information clear while the colour itself supports steady, detail-led finishing on scale builds.
Model paints
Italeri AcrylicPaint Flat Ex.dr.SeaGrey 20ml
510004312€3.69
Italeri AcrylicPaint Flat Ex.dr.SeaGrey 20ml brings a specific finishing colour into model work with a 20 ml paint volume and a flat Ex.dr.SeaGrey shade. The defined colour name supports matching across a build where a muted surface tone is needed on selected sections, touch-ups, or broader painted areas. This entry sits in Models & Accessories under Models Supplies, which places it clearly within a model-making context rather than general craft use. The data states assembly is required and gives an assembly time of 600 minutes, pointing to longer-form projects where painting is one stage within a more extensive construction process. The included component is listed as an assembly kit. Minimum age is stated as 14 Years. Together, these details frame the paint around structured hobby builds that call for controlled application and a planned finishing stage. On the bench, the 20 ml size is easy to place alongside other modelling supplies while keeping the selected Flat Ex.dr.SeaGrey tone ready for repeat use across the same project. It also fits builds where colour consistency matters between separate sessions, whether the work focuses on detail correction, section painting, or the final visual balance of the assembled model.
Model paints
Italeri AcrylicPaint Flat Intense Blue 20 ml
510004639€3.69
Italeri AcrylicPaint Flat Intense Blue 20 ml brings a clearly specified paint format and colour designation into model-building supplies. The supplied data names AcrylicPaint as the medium, Flat Intense Blue as the shade, and 20 ml as the stated volume, giving a concise reference point when selecting paint for finishing work. The colour wording in the source data points to a flat blue tone with an intense character, which helps separate this entry from gloss, metallic, or effect-based finishes in a paint collection. The 20 ml size supports measured use across detail sections, smaller painted areas, and follow-up touch-up work where a full-size container may be unnecessary. Assembly is marked as required in the data, with 600 minutes listed as assembly time, and the included components field states assembly kit. The age marking is given as 14 Years. Within a bench setup for model painting, colour sorting, or supply planning, the exact combination of AcrylicPaint, Flat Intense Blue, and 20 ml keeps selection straightforward. It suits cataloguing alongside other model supplies where paint type, shade name, and container volume need to be identified quickly and consistently.
Model paints
Italeri AcrylicPaint Flat Ital. Interior Green
510004855€3.69
Italeri AcrylicPaint Flat Ital.Interior Green brings a specific flat interior shade into model finishing work, giving compatible builds a muted green tone suited to cockpit, cabin or other internal painted areas. The colour name in the product data points to interior use, so it fits projects where a non-gloss surface helps painted sections read with a more scale-appropriate look. This entry sits in the Models Supplies range and is listed as an assembly kit accessory rather than a standalone toy, placing it within a build process that includes surface preparation, painting and final detailing. The stated assembly requirement and assembly time of 600 minutes indicate a longer-form hobby project context rather than quick application alone. Batteries are not included in the product data. The minimum age is 14 Years, matching the focused handling and finishing work typically involved in scale model painting. Used during interior painting stages, this AcrylicPaint can be applied where a build calls for a dedicated Ital.Interior Green shade instead of a general-purpose green. It suits model sessions that move from construction into colour finishing, especially when interior areas need their own distinct tone separate from the outer bodywork. Warning! Not suitable for children under 14 years.
Model helicopters
Italeri AH-1W Super Cobra Model Kit 1:72
510090160€14.49
The Italeri AH-1W Super Cobra model kit in 1:72 scale brings a well-known Bell Helicopter attack helicopter to the bench with the lean fuselage, tandem cockpit layout and mission-focused profile that defined this aircraft in service from the 1980s onward. As an evolution of the Cobra, the AH-1W combined compact attack-helicopter proportions with a layout built around a 2-person crew, placing the pilot and weapons operator in tandem to support visibility during combat operations. In full scale, the AH-1W used 2 General Electric turboshaft engines and could exceed 280 km/h, details that help explain the aircraft's fast-response battlefield role. The type served in several operational theaters, including the Gulf and Iraq, and was used by the United States Marine Corps in support of ground troops during amphibious assault operations. Its weapons fit could include TOW anti-tank missiles, AGM-114 Hellfire guided missiles and unguided rockets, giving the subject a distinctly armed late-20th-century configuration. On a shelf or within a modern military diorama, the AH-1W Super Cobra stands out through its narrow body, stepped crew arrangement and attack loadout. The 1:72 scale keeps the build manageable while still leaving room for the aircraft's defining shapes and equipment to read clearly in the finished model. Warning! Not suitable for children under 14 years.
Model car kit
Italeri Alfa Romeo Guilia 1600 Spider 1:24 Kit
510003668€37.99
The Italeri Alfa Romeo Guilia 1600 Spider 1:24 kit turns a celebrated Italian roadster into a detailed scale build with the long, low lines of the original open-top car clearly carried into the finished model. Based on the Giulia Spider produced from 1962 to 1965, this assembly kit focuses on the shape changes that distinguished it from the earlier Giulietta, including the revised front hood linked to the 1,570 cc inline 4-cylinder engine. The full-size car used a synchronized 5-speed gearbox, and the model reflects that period specification through its carefully detailed cockpit and exterior layout. Interior elements such as the seats, steering wheel and instrumentation help recreate the updated cabin, while separate body components, front lighting parts, grille details and chrome-look trim areas give the build more definition as each stage comes together. The decal sheet extends that finish with badges, wheel markings and alternative European registration plates for Italy, France, Germany, the Netherlands and Spain. With a stated assembly time of 600 minutes, the kit suits a measured build pace centered on painting, fitting and final detailing. On the bench, the 1:24 scale gives enough presence for trim accents and body contours to stand out, whether the completed Spider is placed in a display cabinet or alongside other classic automotive subjects. The assembly kit is intended for ages 14 years and over. Warning! Not suitable for children under 14 years.
Military figures & accessories
Italeri Alpini Figure Set 1:72 WWII Model Kit
510006059€10.99
The Italeri Alpini figure set in 1:72 brings WWII Italian mountain troops into compact scale for dioramas, war game tables and historical displays. With 48 unpainted figures in the box, the set gives a scene the visual mass needed for defensive lines, marching groups or retreat formations shaped around the Russian front campaign of 1942 to January 1943. The subject draws on the Alpini Julia, Tridentina and Cuneense divisions, which fought on the Don front and later retreated across the Russian steppe under severe winter conditions. That background gives the figures a clear historical setting for snowbound layouts, battlefield vignettes and campaign-based collections. The sprues show multiple infantry poses, including advancing, prone and weapon-handling stances, along with mountain troop details such as skis, poles and field gear. Horse and mounted parts also appear on the frames, adding further options for scene composition. Assembly time is stated as 600 minutes, which suits a build focused on preparation, painting and placement. On a display base, the mix of repeated figures and varied actions helps shape larger formations with a consistent uniform look. In a diorama, the winter equipment and 1:72 scale make the set easy to combine with vehicles, terrain pieces and structures from the same period. Assembly kit. Minimum age: 14 years.
Model trucks
Italeri American Superliner Truck Model Kit 1:24
510003820€62.99
The 1:24 American Superliner from Italeri captures the look of a classic U.S. long-haul tractor with a stretched hood, a large sleeper section and the visual weight that defines this truck category. At 35.22 cm long, the finished model brings that road-going presence onto the workbench and into the display cabinet, with the Lady Butterfly livery adding a custom show-truck character across the cab and hood. The build centers on a multi-part truck structure rather than a simple outer shell. Instruction stages show a ladder-style frame, axle modules, underbody tanks, radiator and engine-area components, followed by a separate cab interior with seats, dashboard and steering wheel. Clear glazing parts close the cab, while mirrors, roof details, bumper elements and a front guard complete the exterior. Decal placement guides cover the portrait artwork, butterfly motifs, script markings and license plate details, so the finished truck carries the same bold identity shown in the kit artwork. This assembly kit suits model builders who enjoy vehicle subjects with visible mechanical content as well as custom graphics. Assembly takes about 600 minutes. Paints, cement and tools are required separately. Once completed, the American Superliner fits naturally into truck model collections, workshop display shelves or themed dioramas built around highway transport.
Military aeroplane models
Italeri AMX-T Twin Seater Model Kit 1:72
510001471€29.99
The Italeri 1:72 AMX-T Twin Seater brings the lines of the Italian and Brazilian AMX programme into a detailed aircraft build with a two-seat cockpit layout, swept wings and the compact proportions of the original ground attack jet. As a plastic assembly kit, it focuses on the shape, markings and finishing work that give this aircraft its distinct presence on the shelf. The subject is the AMX-T, the twin-seat version developed as an advanced training aircraft with the ability to serve in ground attack and close support roles. The real aircraft used a Rolls-Royce Spey 807 engine, reached a maximum speed of 1,000 km/h and, in Italian service, carried a 20 mm M61 cannon with an offensive payload of 3,800 kg. Those background details give the finished model a clear operational identity. New parts in this release are joined by photo-etched parts for finer detail, and the super decals sheet covers 4 versions with Aeronautica Militare markings. Figures are not included. The different marking options open up several display directions, from the TA-11 MM55037 of 132° Gruppo, 3° Stormo at Kleine-Brogel AB in 1998 to MM55051 of 101° Gruppo O.C.U. 32° Stormo at Amendola AB in June 2006 and ACOL MM55049 of 132° Gruppo, 51° Stormo at Istrana AB in February 2020. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately.
Military figures & accessories
Italeri Antitank Obstacles Model Kit 1:72
510006147€9.49
Italeri Antitank Obstacles is a 1:72 assembly kit created for static military dioramas, with 61 parts that build a varied group of defensive barriers for detailed scene composition. The set focuses on obstacle elements rather than vehicles or figures, making it a useful addition when a layout needs roadblocks, perimeter markers or fortified ground sections that read clearly at small scale. The parts assortment supports several obstacle shapes, including block forms, pyramid-style barriers and frame constructions associated with battlefield defences. That mix helps break up flat terrain and gives a scene more structure across roads, open ground or checkpoint areas. Because the kit is static, placement can be planned precisely around armour, infantry positions or damaged terrain already present in a 1:72 display. Assembly time is stated as 600 minutes, which suits a slower build with room for cleanup, painting and weathering between stages. On a shelf, in a display case or as part of a larger historical layout, the finished barriers add clear visual reference points that guide how the scene is read. Rows of obstacles can mark restricted access, shape the edge of a defended zone or create stronger depth in compact diorama footprints. Age 14 Years+
Military figures & accessories
Italeri AS.51 HORSA Mk.I/II 1:72 Glider Kit
510101356€31.49
Italeri AS.51 HORSA Mk.I/II & Brit. Paratr. brings a key Allied airborne aircraft into 1:72 scale with a finished length of 28.4 cm. The long-fuselage glider format gives the model a distinctive silhouette on the bench and in a display lineup, while the D-Day Series framing connects it directly to Normandy 1944 and the wider story of airborne operations. The subject represents the well-known British Horsa, a transport glider used to carry more than 25 troops or substantial war material and supplies. Its service history links it to the main airborne landings of World War Two, with especially strong ties to Normandy and the Arnhem bridge operation in the Netherlands. The set combines the aircraft with British paratrooper figures, so the finished scene can show the glider at rest after landing rather than as a standalone airframe. Decals are provided for 1 version, and the source material also references Operation Tonga and Pegasus Bridge markings for historically specific finishing. This assembly kit suits model builders who enjoy military aviation subjects with a clear operational setting. On a shelf, in a diorama, or as part of a D-Day collection, the Horsa and paratrooper combination creates a focused World War Two display with aircraft scale, troop context and campaign identity working together.
Military aeroplane models
Italeri AS332 Super Puma Model Kit 1:72 Scale
510091096€24.99
The Italeri AS332 Super Puma model kit in 1:72 scale brings a widely used medium twin-engine helicopter to the workbench with a detailed build centered on a recognizable 4-blade rotor layout and the aircraft's clean, purposeful lines. The AS332 Super Puma was designed by Aerospatiale, now Airbus Helicopters, and the finished model captures the form of a helicopter developed for demanding military and civilian missions. On the full-size aircraft, 2 Turbomeca engines support a cruising speed of 260 km/h, while retractable landing gear improves aerodynamics during flight. That technical background gives the build a strong real-world foundation and makes the subject especially appealing for collections focused on utility aircraft, transport helicopters, and modern rotary-wing aviation. The AS332 Super Puma also stands out for a range of 800 km and for continuous upgrades to avionics and electronic navigation support systems across its service life. Set on a shelf, in a display cabinet, or alongside other 1:72 aircraft, the completed helicopter adds a clear operational character drawn from a machine built for long-range missions. The kit suits builders aged 14 years and up who want a helicopter subject with authentic engineering context and a strong presence in modern aviation history. Warning! Not suitable for children under 14 years.
Model car kit
Italeri Audi Quattro Model Kit in 1:24 Scale
510003671€32.99
The Italeri Audi Quattro model kit brings the classic road car into a detailed 1:24 scale format that places the build itself at the center of the experience. The plastic assembly kit translates the coupe silhouette, front-end character and compact proportions of the Audi Quattro into a display model that grows piece by piece across a longer bench session. With 600 minutes of assembly time stated in the data, this kit supports a measured approach to fitting, painting and final presentation. The 1:24 scale gives the finished car a balanced footprint for shelves, desks or display cabinets while still leaving room for visible body shaping and exterior detail. The assembly-kit format suits hobby sessions that can be spread across several stages, with each completed section adding more definition to the recognizable Audi Quattro form. The included component is the assembly kit itself. On a worktable, the model offers a focused car-building project with a clear subject and a well-known automotive profile. Once completed, the finished replica sits naturally among other 1:24 scale vehicles, whether arranged as a standalone display piece or as part of a broader model car collection. The age marking in the data is 14 Years. Warning! Not suitable for children under 14 years.
Model car kit
Italeri Audi Quattro Rally Model Kit 1:24
510003642€36.99
Italeri Audi Quattro Rally Model Kit 1:24 captures one of the defining rally cars of the early 1980s in a build centered on competition detail and period-correct finishing. The model is based on the Audi Quattro rally car that debuted in the World Rally Championship in 1981, bringing the shape of the 2-door coupe together with the visual character of its Monte Carlo-style racing livery. The kit uses an unpainted body shell and a multi-stage assembly layout that moves through the rolling chassis, cockpit, exterior trim and final body fit. Interior details shown in the build include racing seats, a dashboard with instrument markings, a steering wheel, a center console and a roll-cage structure. The front end can be finished with optional auxiliary rally lamps, while the rear section adds spoiler and bumper details that sharpen the competition stance. The super decals sheet covers body graphics, sponsor logos, number panels, license plates, gauges and seat markings, giving the finished model a dense layer of event-specific detail. During assembly, selected front wheel and steering connections are left unglued so movement remains in the completed chassis. That makes the build feel more mechanical while the model takes shape across the 600-minute assembly time. Paints, cement and tools are required separately. On a shelf, desk or hobby bench, the completed Audi Quattro Rally brings together classic 4-wheel-drive rally history, crisp 1:24 scale proportions and a finish that rewards careful painting and decal work.
Military figures & accessories
Italeri Austerlitz 1805 Battle Set 1:72 Model
510006071€74.99
Italeri Battle Set Austerlitz 1805 Sokol. brings the Battle of Austerlitz into a 1:72 scale model scene built around the fighting near Sokolnitz. As a detailed plastic kit marked 14 Years+, it focuses on the build itself while giving the finished layout a clear historical setting tied to one of the defining clashes of the Napoleonic Wars. The source material places the action on 2 December 1805 near Austerlitz, in the battle also known as the Battle of the Three Emperors. It sets Napoleon's Grande Armee against the allied forces of Tsar Alexander I of Russia and Emperor Francis II of Austria, and highlights the confrontation as the decisive moment of the War of the Third Coalition. The historical account also points to key locations such as Tellnitz, Sokolnitz, the granary, the castle and the Pratzen Heights, which gives the scene a specific military context rather than a generic battlefield theme. On the worktable, the 1:72 format keeps the composition manageable while still allowing a broad battle setting to take shape. Once assembled, the set suits display alongside other Napoleonic models or use as part of a larger historical collection centred on the 1805 campaign.
Model trucks
Italeri Australian Truck Model Kit 1:24 Scale
510000719€61.99
The Australian Truck from Italeri brings the road train style of long-distance outback transport into a 1:24 scale assembly kit with a finished model length of 33.2 cm. Its layout is based on the special equipment used on rugged, unsealed routes, so the build carries the visual weight of a truck prepared for extreme mileage and demanding terrain. The subject draws on the modifications named for Australian rigs, including a large bull-bar, wire mesh ahead of the windscreen, special dust filters, additional fuel tanks, heavy duty wheels, airconditioning and multiple driving lights. That combination gives the model a clear working identity rather than a generic highway truck silhouette. The kit also represents a right-hand steering configuration for this Western Star version, a detail that changes the cab layout and adds authenticity to the finished build. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the larger 1:24 format supports a measured, detail-focused build with visible progress across the cab, chassis and exterior equipment. Once completed, the 33.2 cm model suits shelf display alongside other truck subjects, while the road train theme connects it to the bulk-haul combinations that can run with up to 3 trailers over more than 31 metres in full-scale service.
Model figures
Italeri Austrian & Russian General Staff 1:72
510006037€12.69
Italeri Austrian & Russian General Staff 1:72 brings a defined command scene into Napoleonic model building with 5 riders and 34 figures arranged around the allied leadership of Austria and Russia. The combination of mounted and standing poses gives a diorama base the structure of a parade, briefing, or pre-battle assembly rather than a generic troop grouping. The historical reference in the source material points to a moment before the Battle of Austerlitz in December 1805, when the Third Coalition faced Napoleon's Grande Armée. That setting gives the figures a precise place within early 19th century military displays and helps connect them with campaign-based layouts, staff scenes, and larger battlefield compositions. In 1:72 scale, the set fits naturally alongside other period troops, artillery, and cavalry used in the same modelling range. Painting sessions can focus on contrasting uniforms, mounted details, and the visual hierarchy between officers, rulers, and attendants. Once placed on a terrain base, the 39-piece group can anchor a headquarters vignette, a ceremonial review, or a wider historical arrangement built around the events of 1805. Age marking: 14 years Warning! Not suitable for children under 14 years.
Model figures
Italeri Austrian Infantry 1798-1805 Model Kit
510006093€10.49
The Italeri 1:72 Austrian Infantry 1798-1805 model kit brings a defined Napoleonic formation into scale form, centred on the troops that faced Napoleon's forces during the Marengo campaign of 14 June 1800. Its historical setting gives diorama builders and military model collectors a clear reference point for arranging battle scenes with period accuracy. The figures are presented with uniform elements taken from the era, including the typical short leather cap and a brass front plate bearing the imperial eagle. Some soldiers are also depicted with the 1798 helmet marked with Francis II's initials, a distinction associated here with Frei-Corps or Jager light infantry battalions. These variations help create a more nuanced formation instead of a single repeated look across the whole set. The 1:72 scale fits naturally into established military modelling layouts and allows the figures to combine with other scenery, artillery, and battlefield builds in the same scale. On the workbench, the detailed plastic parts invite careful trimming, assembly, and painting. Once finished, the figures suit regimented line-ups, campaign vignettes, and larger Napoleonic battle recreations where uniform differences and historical context shape the final scene. Age marking: 14 years and up. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri AV-8B Harrier II 1:72 Plastic Kit
510090193€22.99
The Italeri AV-8B Harrier II 1:72 Plastic Kit brings a modern multirole aircraft into a compact build scale, combining the distinctive Harrier layout with a subject shaped by British and American aeronautical collaboration. As a detailed plastic kit, it focuses attention on the form and configuration of an aircraft developed for short takeoff and vertical landing operations. The AV-8B Harrier II marked a significant step beyond the first Harrier family aircraft. It was developed to operate from aircraft carriers without catapults, from amphibious assault ships, and from improvised landing strips, giving the original aircraft an unusually broad operating profile. That background gives the finished 1:72 model a strong real-world context rooted in naval and expeditionary aviation. The aircraft was widely employed by the United States Marine Corps, and its mission profile covered multirole attack and close air support duties across varied operational settings. On the bench, this aircraft subject suits builders who enjoy military aviation with a clear technical identity rather than a generic jet outline. Once assembled, the model fits naturally into displays focused on modern combat aircraft, carrier aviation, or Harrier family development. Minimum age: 14 years. Warning! Not suitable for children under 14 years.
Military helicopters
Italeri AW-101 Merlin HM.1 Model Kit 1:72
510001486€27.99
The Italeri AW-101 Merlin HM.1 model kit in 1:72 scale brings a modern Royal Navy helicopter onto the workbench with a shape defined by its large fuselage, prominent cockpit glazing and distinctive naval equipment fit. The subject represents the AW-101 Merlin, a medium-heavy multirole helicopter developed by AgustaWestland in collaboration with Westland Helicopters for naval service. In full-scale service, the Merlin was introduced in the early 2000s to replace the SH-3D Sea King and took on anti-submarine warfare as its primary embarked role. Its operational profile also extends to troop transport, maritime search and rescue, and combat search and rescue, which gives the finished model a clear place within modern military aviation collections. The aircraft is powered by 3 turbines, reaches a maximum speed of 310 km/h and has an operational range exceeding 1,350 km. A super decals sheet for 3 versions supports different marking finishes on the completed helicopter. Figures are not included. On the bench, the 1:72 format suits careful painting, decal placement and weathering across the Merlin's broad surfaces, sensors and undercarriage details. Once completed, the AW-101 Merlin HM.1 sits naturally in a line-up of contemporary helicopters, naval aircraft or search-and-rescue subjects, with the CROWEST-marked Royal Navy appearance giving the build a strong service character. Warning! Not suitable for children under 14 years.
Model aircraft
Italeri B-17F Flying Fortress Model Kit 1:72
510001487€39.99
The Italeri B-17F Flying Fortress model kit brings a landmark World War II aircraft into 1:72 scale, combining the unmistakable 4-engine heavy bomber layout with the long wing plan and fuselage form that defined the Boeing B-17 family. The B-17F variant represented a major step forward within the series and gives this build a strong historical identity on the workbench and in a finished display. In service with the United States Army Air Forces, the B-17 Flying Fortress was used extensively during World War II and became closely associated with daytime strategic bombing missions over the European front. The B-17F is described as offering extended operational range, a substantial offensive payload and defensive armament of 10 .50 caliber machine guns. Another defining characteristic of the full-size aircraft was its ability to return to base even after heavy structural damage, a trait that made the type especially respected among flight crews and helped secure its lasting place in aviation history. This 1:72 aircraft build suits focused assembly sessions, careful painting and historically minded presentation once completed. On a shelf, in a display cabinet or alongside other military aircraft in the same scale, the B-17F Flying Fortress stands out through its wartime role, recognisable silhouette and strong connection to the air campaign over Europe.
Military aeroplane models
Italeri B-52G Stratofortress Model Kit 1:72
510001378€74.99
Italeri B-52G Stratofortress brings one of the best-known long-range strategic bombers in aviation history into a detailed 1:72 assembly kit. With a finished length of 67.4 cm, the model has the physical presence to show the aircraft's long fuselage, swept wing layout and multi-engine configuration clearly on the workbench and in a display setting. This version represents the B-52G, the most produced variant of the Stratofortress family. The subject reflects the changes that defined the G version, including a strengthened structure, updated avionic systems, increased fuel capacity and the option to carry external fuel tanks for longer operational range. Super decal sheets provide 4 version choices, opening the way to different USAF serials, insignia and unit markings during the finishing stage. The included color instruction sheet helps guide camouflage placement and decal positioning across those alternative schemes. Assembly is specified at 600 minutes. The historical setting adds extra depth to the build, with markings linked to aircraft used in the early 1990s and a version that took part in Operation Desert Storm in 1991. That combination of large scale, variant-specific markings and Cold War to Gulf War context gives the finished aircraft a strong presence whether the focus is careful painting, decal work or a collection centered on military aviation history.
Military figures & accessories
Italeri Bastogne Siege Battle Set Model Kit 1:72
510006186€70.99
Italeri Bastogne Siege is a 1:72 battle set model kit built around one of the defining winter engagements of December 1944. The set brings infantry, armor and scenery into a single layout, making it possible to shape a snowbound battlefield with opposing forces, a damaged structure and route markers that echo the road-junction fighting around Bastogne. The kit contains 151 parts and centers the scene on 50 U.S. infantry figures, 36 German infantry figures, an M4A3E2 Jumbo and a Panther Ausf. G. A ruined house corner in laser-cut MDF introduces vertical structure and cover, while battlefield accessories such as obstacles, sandbags, crates, barrels, poles and signposts help break the ground plan into defensive positions and movement routes. The 2 armored vehicles are marked as Fast Assembly models, which keeps the focus on arranging the wider combat scene rather than on a vehicle-only build. Assembly is required, with a stated build time of 600 minutes. On a shelf, workbench or diorama base, the set supports a compact but layered recreation of the Bastogne siege, from street-edge fighting near damaged walls to armored movement past barricades and signs. The mixed contents also suit builders who want to paint winter uniforms, weathered armor and battlefield details within one coordinated WWII scene. Warning! Not suitable for children under 14 years.
Military figures & accessories
Italeri Battle Set Sainte-Mere-Eglise 1:72
510006199€74.99
Italeri Battle Set Sainte-Mere-Eglise 1:72 centers on the June 6, 1944 air assault in Normandy and turns that moment into a detailed WWII diorama build. The combination of the Sainte-Mere-Eglise Church, opposing troop groups and an Sd.Kfz. 251/1 Ausf. C gives the scene a strong focal point, with the road junction and church square shaping how the layout reads once assembled. The church is made from laser-cut MDF, which sets it apart from the figure frames and gives the town setting a distinct architectural core. Around it, 48 U.S. Paratroopers and 50 German Infantry allow broader scene composition than a small skirmish setup, with enough figures to spread action across entrances, walls and street edges. The 16 urban accessories add town details such as barriers, posts and street fixtures that help break up open ground and define positions. Decals add road signs, clock details and vehicle markings that sharpen the period look of the finished display. Assembly is required, and the stated assembly time is 600 minutes. Paints, tools and cement are required separately. Once completed, the set suits shelf display, historical scene building and tabletop layouts that focus on the Battle of Normandy through one specific location rather than a generic battlefield.
Military figures & accessories
Italeri Battlefield Accessories Model Kit 1:72
510006049€9.49
Italeri Battlefield Accessories brings WWII diorama building into 1:72 scale with a scenery-focused assembly kit shaped around defensive field details and environmental structures. The set is built for model scenes that need more than a vehicle or figure alone, adding the visual language of barriers, trenches, poles, signs and storage pieces to a battlefield layout. The unassembled parts are arranged on sprues and include a mix of molded shapes suited to fortification and roadside scenery. Visible elements from the set include anti-tank obstacles, wooden barricade forms, a sandbagged defensive position, signposts, barrels, a crate and stacked stakes. This combination helps define routes, block passages and frame positions within a static display. The 600-minute assembly time points to a project with room for careful cutting, placement and finishing. At 1:72 scale, the accessories can be integrated into compact scenes while still giving enough variety to build layered terrain around military subjects. On a shelf, in a display case or as part of a larger historical setup, the kit supports scenes such as a defended roadside, a trench line or a fortified approach. Minimum age is 14 Years. Paints and further modelling equipment are required separately. Warning! Not suitable for children under 14 years.
Model figures
Italeri Battlefield Accessories Model Kit 1:72
510006030€14.99
Italeri Battlefield Accessories is a 1:72 assembly kit built to add structure, cover and terrain detail to historical military scenes. The set brings together fortification elements such as a wooden bridge, palisade sections, trench parts and defensive obstacles, so a diorama can move beyond open ground into a more defined battlefield layout. The 109-piece format gives room for different arrangements, with watchtower parts, gate sections, ramps, gabion-style baskets, barrels, shelters and wall details available for varied placement. These components support scenes around guarded crossings, defended camp edges and improvised front lines, while the mix of timber-style and brick-style surfaces gives painted finishes more contrast. Assembly is required, with a stated build time of 600 minutes. Paints, cement and tools are required separately. Once built, the accessories can frame troop positions, shape movement routes and break up larger terrain boards with vertical and low-profile cover. A bridge over a stream, a tower above palisades or trench sections linked by barriers can change how a 1:72 display reads from every angle. The kit is marked 14 Years+.
Military figures & accessories
Italeri Battlefield Buildings Model Kit 1:72
510006130€9.49
Italeri Battlefield Buildings is a 1:72 model kit for building WWII scenery that gives military layouts a defined checkpoint, lookout and field support area. The set combines a tall watchtower, a sentry hut with boom barrier and a covered shelter, creating a compact group of structures that can frame roads, camp entrances or defensive positions with a more complete battlefield setting. The watchtower stands on a narrow 4-leg structure with cross-bracing and a ladder leading to the roofed platform, while the hut and barrier form a clear access point for convoy or perimeter scenes. Textured parts on the sprues reproduce plank surfaces, ground sections and structural panels that respond well to careful painting and weathering. Additional accessories such as sandbags, crates, rocks and stretcher-style pieces help break up open ground and support more layered placement around vehicles and figures. A decal sheet is included for the shelter and checkpoint markings, including a red cross emblem and striped graphics. With 600 minutes assembly time, the build suits modelmakers who want scenery that adds narrative around 1:72 vehicles and figures rather than another standalone machine. The finished structures can anchor a border post, aid station, depot entrance or observation point, giving static displays and tabletop scenes more context at the edges of the action.
Model tanks
Italeri Bedford QL Truck 1:35 Scale Model Kit
510000241€36.99
Italeri Bedford QL Truck 1:35 Scale Model Kit brings a late-1930s British military transport vehicle into a detailed build with a clear wartime identity. The Bedford QL line was developed for the British Army as a more modern and flexible transport vehicle, and this kit focuses on that medium truck format in 1:35 scale for a display piece with strong historical character. Following testing in 1940 and distribution in early 1941, Bedford QL trucks served with Army Corps, Regiments and other units across multiple fronts. Their relatively low weight and 4-wheel-drive configuration supported logistical and transportation duties in demanding conditions, while the same platform was also used for towing artillery such as the 6 pounder anti-tank gun and the 40 mm Bofors anti-aircraft gun. The subject therefore offers more than a vehicle shape alone; it connects the build to transport, field support and towing roles within British wartime operations. The assembly kit is intended for ages 14+ and has a stated assembly time of 600 minutes, making it a substantial project with room for careful finishing work. Marking options for 3 versions add variety to the final result, with reference schemes linked to British units in Egypt and El Alamein in 1942. Figures are not included. Paints are required separately.
Model tanks
Italeri Bergetiger 1:35 Support Vehicle Kit
510006764€33.49
Italeri Bergetiger brings a rare armored recovery subject into 1:35 scale with a detailed plastic kit based on the modified Tiger I support vehicle. The model centers on the distinctive battlefield conversion in which the original tank lost its main gun and took on a crane for technical and logistical work around front-line armored units. The historical reference behind this version gives the build a very specific identity. Allied forces used the name Bergetiger for captured examples, following the same naming pattern seen on recovery vehicles derived from Panther and Panzer IV tanks. Contemporary accounts describe a machine that kept the Tiger I hull, tracks, and heavy armor while adding equipment intended for towing disabled tanks, lifting heavy components, carrying spare parts, and supporting repairs on other armored vehicles. No official production statistics are known, and the type is generally believed to have been assembled in small numbers by Wehrmacht field workshops at the front. That background gives the finished model a strong presence in military dioramas, workshop scenes, and vehicle lineups focused on support and recovery roles rather than direct combat. The 14 years age marking fits a build that rewards careful handling of a less common World War II vehicle subject and adds a distinctive variant to a 1:35 armor collection.
Military aeroplane models
Italeri Bf 109 G-2/G-6 Aces Model Kit 1:72
510001483€16.79
Italeri Bf 109 G-2/G-6 Aces brings one of the most famous fighter aircraft of the Second World War into a compact 1:72 scale model kit. The Messerschmitt Bf 109 monoplane fighter became a defining aircraft of the Luftwaffe, and this edition centres on the G-2 and G-6 versions associated with well-known aces. The subject carries strong historical weight beyond its outline alone. Throughout the war, the Bf 109 was repeatedly upgraded in engines and armament to remain competitive against newer aircraft with higher flight performance. Together with the Focke-Wulf Fw 190, it formed the backbone of German fighter units, giving this build a clear place within the wider story of wartime aviation. The Aces designation connects the model to pilots from Jagdgeschwader 52 and to Erich Hartmann, the highest-scoring ace of the Second World War named in the source data. On the bench, the 1:72 format keeps the project compact while still leaving room for careful painting and finishing. Once assembled, the aircraft sits naturally in a display cabinet, on a shelf, or alongside other historic aviation models, where the familiar Bf 109 silhouette and ace-focused presentation stand out clearly. Age 14+
Military aeroplane models
Italeri Bf 110 C-3/C-4 Zerstorer Model Kit 1:72
510000049€21.99
Italeri Bf 110 C-3/C-4 Zerstorer brings a well-known World War II twin-engine aircraft into 1:72 scale as an assembly kit shaped around the heavy fighter's long fuselage, twin tail layout and engine nacelles. The subject is based on the Messerschmitt Bf 110 in the C and C-4 variants, an aircraft used in roles that ranged from interceptor and fighter-bomber to reconnaissance, anti-ship missions and night fighting. The full-size aircraft was powered by 2 Daimler-Benz DB 601 engines rated at 1200 hp each and reached a maximum speed of 560 km/h, details that help define the proportions and mission profile of the model. Underwing external stores are part of the aircraft configuration, with bombs or additional fuel tanks used to extend operational range on the original machine. The kit is presented as a New Decals Edition and contains one model with a super decals sheet for 5 versions, giving the finishing stage a wider choice of codes, insignia and markings. Figures are not included. Assembly time is stated as 600 minutes. During the build, the 1:72 format keeps the project compact while still leaving room for painting, decal placement and careful finishing of the canopy, armament and undercarriage. On a shelf, desk or display cabinet, the completed Bf 110 C-3/C-4 stands out through its twin-engine silhouette and historically grounded configuration. Paints and tools are required separately. Warning! Not suitable for children under 14 years.
Military ship models
Italeri Biber Midget Submarine Model Kit 1:35
510005609€30.99
Italeri Biber Midget Submarine is a 1:35 assembly kit that recreates one of the most recognizable compact submarines used by the Kriegsmarine in the later years of World War II. With a finished length of about 186 mm, the model gives the narrow hull, raised conning tower and external weapon mounting layout enough room to stand out clearly on a shelf or in a naval diorama. The original Biber measured 9 m and was designed for a crew of 1, a combination that shaped its unusually small profile and focused mission role. Italeri carries that character into the build with the submarine's lean body, mast structures and the externally mounted torpedo arrangement that defined the type. Historical context adds depth to the finished model: development began in February 1944, the first units were launched 6 months later, and more than 300 Bibers were deployed before the end of the war. The real craft had a range of 240 km, a surfaced speed of 6.5 knots and a submerged speed of 5.3 knots. On the workbench, the kit suits builders who enjoy military naval subjects with a compact footprint and distinctive wartime markings. The included crew figures support dockside or underway presentation, while the alternate version options open up different paint and marking directions for a more individual result. Paints are required separately.
Model tanks
Italeri BMW R 75 with Side Car Model Kit 1:35
510000315€11.99
The Italeri 1:35 BMW R 75 with Side Car assembly kit brings a historic military motorcycle into a compact display format, combining the distinctive sidecar layout with a finished model length of 6.6 cm. The subject represents the BMW R 75, a machine used in motorized units, and the sidecar-mounted MG 34 adds a clear mechanical focal point to the build. Beyond the motorcycle itself, the kit contains 3 figures that help shape a fuller scene around the vehicle. Their presence supports diorama planning with a stronger sense of movement, command or field transport rather than leaving the finished model as a standalone machine. The source subject also carries a recorded road speed of 92 km/h, a detail that underlines the fast dispatch role associated with this type of motorcycle. A decal for 1 version gives the finishing stage a defined marking option for the completed build. With a stated assembly time of 600 minutes, this model suits a slower, more deliberate build rhythm that leaves space for painting, fitting and display planning. On a shelf, in a cabinet or as part of a 1:35 military scene, the motorcycle, sidecar and figures create a compact composition with clear historical character. Age 14 Years+
Military figures & accessories
Italeri Brick Walls Model Kit 1:35 Scale
510000405€9.49
Italeri Brick Walls brings a ruined masonry scene into 1:35 scale with an assembly kit built around miniature brick construction. The layout forms connected wall sections with uneven broken tops and a front opening, creating the look of a damaged building corner that gives a diorama immediate architectural structure. Instead of relying on one-piece cast scenery, the build uses small brick elements that are placed individually, so the wall texture develops course by course across corners, edges and openings. Loose bricks can be arranged at the base to extend the damaged setting into rubble and broken ground detail. This approach gives model makers control over how clean, collapsed or battle-worn the finished structure appears. The 600-minute assembly time points to a slower, detail-led project with room for careful alignment and surface finishing. The set is supplied as an assembly kit, and batteries are not included. On a display base, Brick Walls can frame military subjects, street scenes or standalone ruin studies with a more convincing sense of scale than a flat backdrop. The open wall sections leave sightlines through the structure, which helps when positioning vehicles, figures or debris around the finished build. Recommended age: 14 Years.
Model figures
Italeri British & Prussian General Staff 1:72
510006065€10.99
Italeri British & Prussian General Staff 1:72 brings a key Waterloo moment into model form with a scene centred on the meeting of the Duke of Wellington and the Prussian Marshal Von Blucher. The assembly kit focuses on allied command rather than front-line combat, making it a distinctive choice for Napoleonic collections and battlefield displays. Set within the Seventh Coalition formed after Napoleon's return from exile on Elba, the subject gives the finished build a precise historical frame. British and Prussian staff figures can anchor a command post, map briefing or battlefield overview in a 1:72 layout. The emphasis on officers and leadership figures adds variety beside infantry, cavalry and artillery units already arranged in the same scale. Assembly is required, and the stated assembly time is 600 minutes. The included component is the assembly kit. On a shelf, in a display case or as part of a wider Waterloo diorama, the scene adds a recognisable command narrative through period uniforms, mounted officers and the meeting of two allied commanders. It also suits painters and builders looking to expand a Napoleonic setup with figures that mark decision-making and coordination at the centre of the battlefield.
Model figures
Italeri British Artillery Model Kit 1:72 Scale
510006041€10.99
Italeri British Artillery in 1:72 scale brings a Waterloo era gun crew into a compact model kit built around field artillery, uniformed soldiers and scene-based display potential. The assembly kit combines 4 guns, 48 parts and unpainted figures, creating a focused historical subject that suits shelf presentation, diorama work and careful finishing at the workbench. The Napoleonic Wars theme gives the set a clear setting, while the British artillery designation narrows the scene to a specific battlefield role rather than a general troop mix. Unpainted surfaces leave room for period colour schemes, shaded uniforms, gun carriage detailing and weathered ground effects chosen by the builder. The 1:72 scale also makes the set easy to place with other historical miniatures, terrain sections and military scenery from the same scale range. With assembly required and a stated build time of 600 minutes, the project offers time for test fitting, painting stages and deliberate arrangement of the finished crew around the artillery pieces. On a display base, the figures and cannons can be arranged to suggest loading, aiming or firing positions drawn from British field operations of the Waterloo period. The set also works as a compact addition to a wider Napoleonic collection, where artillery teams add structure, movement and historical context to infantry or battlefield layouts.
Model figures
Italeri British Heavy Cavalry Model Kit 1:72
510006001€10.99
Italeri British Heavy Cavalry Model Kit 1:72 brings a Napoleonic mounted unit into miniature form with 18 horsemen as an assembly kit. The scale gives battle scenes, display bases and historical arrangements a compact footprint while still leaving room for painted uniform detail, horse colours and formation spacing. The subject draws on British heavy cavalry from the Napoleonic Wars and connects the set to the charge of the Union Brigade at Waterloo under the Earl of Uxbridge. Regiments named in the source material include the Royals, the Scots Grey and the Inniskillings, giving the set a clear historical frame for painters and diorama builders. The unassembled parts format supports a step-by-step modelling process, from removing components from the sprue to fitting riders to horses and preparing surfaces for paint. The stated assembly time of 600 minutes marks this as a substantial bench project rather than a quick build. On a shelf, in a battle vignette or across a wargaming layout, the mounted figures can be arranged to suggest movement, charge formation and line-breaking action. The 14 Years marking fits the detailed handling that miniature assembly, painting and scene composition call for in a historical modelling set.
Model figures
Italeri British Infantry 1815 Model Set 1:72
510106095€12.49
Italeri British Infantry 1815 brings a key Waterloo formation into 1:72 scale with 48 unassembled figures shaped for historical model scenes. The set draws on the British squares that resisted repeated cavalry attacks during the Napoleonic Wars, giving the finished formation a clear battlefield identity when arranged in ranks on a display base or diorama. The sculpted figures depict British infantry with period uniforms, tall shakos, Brown Bess flintlock muskets and fixed bayonets. Different poses visible on the sprues, including standing and kneeling riflemen, help break up repeated lines and support more natural unit placement across a scene. The reference to the 2nd Regiment Coldstream Guards ties the set to one of the best-known units at Waterloo and to the defense of Hougoumont farm. As an assembly kit, the figures arrive ready for removal from the sprue, cleanup, painting and placement, with an assembly time of 600 minutes. On a wargame table, the formation suits British line positions, defensive squares and farmstead actions from 1815. In a display cabinet, the 1:72 scale works well alongside other Napoleonic figures, artillery and terrain pieces to build a broader Waterloo setting with consistent proportions.
Military figures & accessories
Italeri British Paratroopers Model Kit 1:72
510006034€10.99
Italeri 1:72 British Paratroopers brings a WWII airborne unit into miniature form with 50 unpainted figures designed for assembly and finishing. The set draws on the British 1st Airborne Division, known as the Red Devils, and places the scene in Operation Market Garden in September 1944, where airborne troops were tasked with securing key bridges over the Rhine and the Meuse. On the bench, the tan sprues show repeated figures and equipment laid out for a full unit build rather than a single display piece. The 1:72 scale makes the figures suitable for military dioramas, battlefield layouts and integration with other scenery of the same scale. Poses visible across the set include standing riflemen, advancing soldiers, kneeling shooters and prone figures, which helps create movement across rubble, streets or bridge sections. Sculpted uniform features include camouflage smocks, netted helmets, chest pouches, belts, straps, boots and rifles, giving painters defined edges for colour separation and weathering work. The stated assembly time is 600 minutes, which reflects a project with room for careful preparation, painting and scene planning. Placed across a bridge approach, ruined street or defensive line, the figures can form a compact airborne section with a shared historical identity. The set also works as a source of 1:72 infantry for expanding larger WWII layouts where repeated troop types and coordinated poses matter.
Military aeroplane models
Italeri C-130 E/H Hercules Aircraft Kit 1:72
510000015€51.99
The Italeri C-130 E/H Hercules assembly kit recreates a landmark military transport aircraft in 1:72 scale, with a finished model length of 39 cm that gives the four-engine airframe real presence on the shelf. High-mounted wings, a tall tail and the broad fuselage shape capture the unmistakable outline of the Hercules in a format built for hands-on model making. The subject itself carries a long operational history, with the C-130 serving in many roles across more than 50 air forces. That background gives the build extra depth when working through the aircraft's structural layout, from the transport fuselage to the 4 propeller-driven engine positions. Decals for 5 versions add further finishing choice, supporting different markings and operator identities rather than a single fixed scheme. The kit is designed as an assembly project and the stated build time of 600 minutes reflects a more involved construction process. During the build, the large airframe gradually takes shape as fuselage sections, wing assemblies and tail components come together into a recognisable cargo plane silhouette. Once completed, the 39 cm format and 1:72 scale make the model well suited to display alongside other military aircraft builds. Cement, paints and tools are required separately.
Military aeroplane models
Italeri C-130 J Hercules PRM 1:72 Model Kit
510001255€52.99
The Italeri 1:72 C-130 J Hercules PRM Edition model kit brings the modernized Hercules transport aircraft into a detailed build with a finished model length of 41 cm. Its high-wing layout, broad fuselage and 4-engine configuration give the aircraft its unmistakable cargo-plane presence, whether placed on a shelf or worked through as a long-form assembly project. This version focuses on the extensively redesigned C-130J. The real aircraft uses 2 4700 HP Rolls-Royce Allison AE2100D3 engine systems driving 6-blade composite-material propellers, and that updated configuration shapes the character of the model. The subject also reflects the aircraft's revised avionics, with digital cockpit instruments and a Head-Up Display noted as part of the full-scale design. Decals for 3 versions allow different service markings and liveries to be applied to the same airframe, which changes the visual finish without changing the core structure. Assembly is required, and the stated assembly time is 600 minutes. The 1:72 scale suits builders who enjoy aircraft subjects with enough surface area for careful painting, weathering and decal work. On the bench, the transport fuselage, wing structure and engine arrangement create a build with clear stages; once completed, the long silhouette and military markings give the aircraft a distinct display presence.
Military figures & accessories
Italeri Cannone da 149/40 with Crew Model Kit
510006165€10.99
The Italeri Cannone da 149/40 with Crew model kit brings a World War II artillery subject into 1:72 scale with a long-barrel field gun and a full team of figures that give the scene immediate structure. The combination of cannon, crew and small battlefield accessories creates a compact display subject that reads clearly on a shelf or as part of a wider military layout. The gun is based on the Cannone da 149/40 mod. 1935 and uses the distinctive features of this artillery type, including the long barrel, large spoked wheels and split trail carriage. Alongside the cannon, the set provides 9 unpainted figures in different poses, allowing the finished scene to suggest loading, observation, command and gun handling rather than a static single-figure display. Small accessories such as ammunition pieces and crates add extra context around the emplacement. The parts are moulded for assembly as a classic scale kit, and the stated assembly time is 600 minutes. Paints are required separately. Once built, the set suits historical dioramas, cabinet display and focused painting sessions where figure uniforms, equipment and gun details can be finished with individual attention. The 1:72 scale also makes the completed cannon easy to place with other military miniatures, vehicles or terrain from the same period.
Model trucks
Italeri Cargo Trailer Model Kit 1:24 Scale
510003885€61.99
The Italeri Cargo Trailer brings a latest-generation European semitrailer into 1:24 scale, with a finished model length of 58.0 cm that gives the build real presence on a shelf or in a road-haulage scene. Its long cargo body, rear door layout and tri-axle undercarriage capture the look of a full-size on-road trailer used in modern freight transport. The assembly kit is built around a detailed chassis and body structure, with separate panels, underbody parts, mudguards and wheel assemblies that shape the trailer step by step. New wheels add updated visual detail to the running gear, and the 8-tyre layout reinforces the heavy commercial character of the finished model. The included super decals sheet covers 2 versions, with DUSSOL Pere & Fils and MONJEAN Transporte liveries shown in the kit material, plus smaller markings such as plates, speed signs and technical labels that sharpen the scale finish. Assembly is required and the stated build time is 600 minutes. Paints are required separately. Marked for ages 14 years+, this model suits focused bench sessions where chassis work, body assembly and final finishing each have their own pace. Once completed, the 1:24 Cargo Trailer fits naturally into truck collections, transport dioramas and display lineups centered on European commercial vehicles.
Military aeroplane models
Italeri Carrier Deck Section 1:72 Model Kit
510001326€28.99
Italeri Carrier Deck Section 1:72 Model Kit builds a modern aircraft carrier flight deck section with the visual tension of launch preparation built into the surface itself. The 40.5 x 23.5 cm format gives 1:72 naval aircraft a defined base for display, while the catapult area and deck layout create a clear operational setting instead of a plain stand. The moulded structure focuses on carrier-specific equipment. The catapult section can be positioned after checking the length of the selected aircraft, so the layout can be matched to different 1:72 carrier-based models. A Jet Blaster Deflector sits behind the launch position and is reproduced with hydraulic cylinders that show how the panel is raised and lowered on the real deck. The included decal sheet adds runway-style lines, warning striping, and deck markings that sharpen the finished look and help separate launch, handling, and edge areas across the surface. Figures and aircraft are not included. On a shelf, in a display case, or as the base for a photographed build, the deck section gives parked jets, launch-ready aircraft, and maintenance scenes a more convincing context. Assembly is required, with an indicated build time of 600 minutes. This kit is marked for ages 14+.
Model tanks
Italeri Carro Armato L6/40 Tank Model Kit 1:35
510096553€34.99
The Carro Armato L6/40 from Italeri brings a compact Italian Second World War light tank into 1:35 scale, combining a focused build with the distinct proportions of a vehicle developed for reconnaissance and infantry support. Its small turret, low profile, and 2-man layout give the model a clear historical character on the bench and in a finished military display. The original Fiat L6/40 entered service in 1941 and was designed in the late 1930s, which places this subject in an early-war armored context with a very specific battlefield role. The commander also operated the cannon, a layout that shaped the real vehicle's internal arrangement and helps explain its compact form. Main armament on the full-size tank consisted of a 20 mm Breda 20/65 Mod. 1935 cannon mounted in the turret, paired with an 8 mm Breda 38 coaxial machine gun. That combination made the L6/40 suitable against light vehicles and lightly protected targets, while heavier armored opponents lay outside its strengths. The subject also opens several historically grounded display directions, since the L6/40 served in North Africa, the Balkans, and on the Eastern Front. A finished 1:35 build can therefore sit naturally in desert, urban, or winter diorama settings, or stand alone as a compact study of Italian wartime vehicle design. The age marking is 14 Years. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Carro Armato P40 Model Kit 1:35 Scale
510006599€36.99
Italeri Carro Armato P40 is a 1:35 scale military vehicle model kit that brings the late-war Italian heavy tank into a focused build with strong historical character. The finished subject combines inclined front armour, riveted construction and the long 75/34 Ansaldo gun, creating a silhouette that stands out in a display cabinet or diorama scene. The design reflects the P26/40 development path described in the source material, where Italian armoured vehicle engineering moved toward heavier protection and stronger firepower. A 420 HP diesel engine formed part of that full-size tank concept, and the model captures the external features tied to that shift, including the more modern hull geometry. At the same time, the build preserves period details such as riveted armour plates and the leaf spring suspension system, giving the subject its distinctive mid-war mechanical character. The kit also supports careful finishing work through alternate markings, with decals for 2 versions that allow different historical presentations of the same vehicle. With 600 minutes assembly time, this kit suits a slower bench session built around fitting, painting and final detailing. Paints, glue and tools are required separately. Once completed, the Carro Armato P40 fits naturally into WWII armour collections, historical dioramas and shelf displays where the angular turret, side skirts and tracked stance can be fully appreciated.
Catalogues & merchandise
Italeri Catalogue 2025 EN/IT reference edition
510009332€2.99
Italeri Catalogue 2025 EN/IT is a printed reference edition that brings the 2025 Italeri range together in one bilingual catalogue. The EN/IT format combines English and Italian text, making the line-up easier to browse when comparing themes, checking range structure or noting specific releases across the year. As a catalogue rather than a model kit, this edition focuses on overview and orientation. It supports range planning by gathering current assortment information into a single source that can be kept at hand on a desk, beside a build area or with a collection archive. The 2025 designation anchors the content to a specific catalogue year, which helps when sorting line updates against earlier or later editions. The printed format also suits quick page-by-page comparison of categories and series without switching between separate listings. During collection planning, wish-list building or model research, the catalogue gives a straightforward way to review the Italeri assortment in one place. It can be used while comparing kit themes, checking what belongs to the current range or keeping a year-marked reference alongside existing catalogues. Minimum age 14 Years is stated in the product data.
Catalogues & merchandise
Italeri Catalogue 2026 EN/IT Int. Model Guide
510009339€2.99
Italeri Catalogue 2026 EN/IT Int. brings the 2026 Italeri range together in a bilingual English and Italian catalogue that supports clear browsing, quick comparison, and easy reference during model planning. The printed format gives the line a structured overview that can be revisited at a desk, beside a workbench, or while sorting ideas for future builds. The EN/IT layout places 2 languages into one edition, which helps when checking names, ranges, and line details across different reading contexts. As a catalogue rather than a kit, this release focuses on reference use: flipping between pages, comparing entries, and keeping the 2026 assortment visible without switching screens or tabs. The 2026 designation anchors it to that specific annual line, making it useful as a dated overview for collectors who track releases by year. On a shelf in a hobby room, at a club table, or next to an ongoing project, the catalogue works as a compact source for range browsing and collection planning. Minimum age: 14 years. It suits moments when a printed reference is more practical than a digital search, especially for checking the wider Italeri line in one place. Warning! Not suitable for children under 14 years.
Catalogues & merchandise
Italeri Catalogue 2026 EN/IT Reference Edition
510009341€2.99
Italeri Catalogue 2026 EN/IT gathers the 2026 Italeri range into a bilingual printed reference with English and Italian text. The format supports quick browsing across model lines and accessories while keeping names and range structure together in one source. This edition is not a build set or a vehicle model; it is a catalogue created for checking the current line and comparing options before choosing a kit or accessory. The EN/IT layout helps when reading across 2 languages, and the 2026 designation places the contents within that specific catalogue year. For collectors, the catalogue can also work as a shelf reference for tracking releases shown in the range. The 14 Years age marking is stated in the product data. On a workbench, desk or bookshelf, the catalogue gives a straightforward way to scan the Italeri line before starting a new project. It also fits collection planning, range familiarisation and model selection when a printed overview is more practical than switching between separate listings. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Char B1 Bis 1:56 Tank Model Kit
510025766€21.99
Italeri Char B1 Bis in 1:56 scale brings the distinctive shape of the French Char de Bataille to the workbench as a detailed military vehicle model kit. The 12.1 cm finished length gives the tank a compact display size, while 85 parts provide enough structure for a rewarding build with visible track runs, turret detail and the front casemate layout that defined the original vehicle. The kit is designed with version choice in mind. Builders can assemble either a standard tank or a flamethrower version, and the marking sheet extends that flexibility with 6 finishing options. Cartograf decals supply names, numbers, crosses, roundels and unit insignia for French and German service variants, including Vercingetorix, Maginot and Gaston de Foix. The subject itself reflects the Char B1 bis configuration, known for its 47 mm turret cannon and 75 mm howitzer mounted in the front hull. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a diorama or alongside 1:56 gaming forces, the model carries the broad tracks, riveted surfaces and heavy silhouette associated with early Second World War armour. The included 3 figures add extra scene-building potential around the turret and hull, while the different version paths invite a finish that leans toward French 1940 service or later German conversions. Paints, glue and tools are required separately. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Chevrolet 15 CWT 1:35 Plastic Kit
510000233€30.99
The Italeri Chevrolet 15 CWT is a 1:35 scale plastic kit that captures the compact proportions and working character of a Commonwealth military truck. The finished subject combines a boxy cab, rugged running gear and a covered or open rear transport body, giving the build a strong period silhouette suited to historical vehicle collections. The kit is designed as a detailed assembly project and is marked 14 Years+. Sprue layouts shown in the set include separate chassis parts, body panels, cargo-bed components, clear parts and wheel elements, so the build develops through distinct structural stages rather than a single-piece shell. The subject is based on the Chevrolet 15 CWT, a four-wheel-drive vehicle used in military logistics and towing roles during World War II. A driver figure is not included. Paint guidance in the set references colours such as Flat Black, Flat Field Drab, Gloss Silver, Sand, Dark Green, Flat Rust and Rubber Black, supporting finishes that match the chosen scheme. The new decal sheet allows 3 historical versions: a Canadian Army vehicle in Normandy, July 1944, a British Army vehicle in Southern Italy, summer 1944, and an Australian Army vehicle at El Alamein, November 1942. Assembly kit contents are included. Assembly is required, with a stated assembly time of 600 minutes. Warning! Not suitable for children under 14 years.
Military helicopters
Italeri Chinook HC.1 / CH-47D Model Kit 1:48
510002779€57.99
Italeri Chinook HC.1 / CH-47D brings the distinctive tandem-rotor silhouette of Boeing's heavy-lift helicopter into a 1:48 scale assembly kit with a finished length of 34.0 cm. The long fuselage, raised front cockpit, tail rotor pylon and transport-helicopter layout give the completed aircraft a commanding presence in a military aviation collection. The subject draws on a helicopter family developed for transport duties and adopted in several versions by operators around the world. This kit focuses on the HC.1 / CH-47D configuration and uses upgraded moulds to reproduce the airframe with sharper structural detail across the fuselage and exterior surfaces. The decal content opens up 3 marking options, including service titles, serials, warning stencils and cockpit details that add scale depth beyond the main airframe parts. A 600-minute assembly time suits builders who enjoy a longer project with painting, marking placement and careful sub-assembly work across the cabin, undercarriage and rotor sections. On the bench, the model offers a steady sequence of cutting, fitting, cementing and finishing steps that reward patient work. Once completed, the 34.0 cm helicopter suits display alongside other 1:48 military aircraft or as a standalone centrepiece that highlights the Chinook's unmistakable twin-rotor form.
Military figures & accessories
Italeri Confederate Infantry Model Kit 1:72
510006178€10.99
Italeri 1/72 Confederate Infantry (Amer.Civil War) is a historical figure model kit built around 50 unpainted figures for American Civil War scenes. The 1:72 scale gives the set a compact footprint while still leaving room for rifles, field gear and varied uniform details to stand out once painted and arranged across a diorama or display base. The subject reflects the Confederate army formed in 1861, with uniforms described in the source material as diverse rather than standardized. That variation gives the painting stage more visual range across coats, trousers and equipment, instead of locking the whole set into one repeated finish. The figures appear on sprues as an assembly kit, so each stage can be handled in sequence: removing parts, preparing surfaces, painting details and placing the finished soldiers into formation. Command and action poses support scenes with movement and direction, while the larger group size helps create depth across front and rear ranks. A 600 minute assembly time suits a project that can be spread across several sessions at the workbench. Once completed, the set can anchor a battlefield vignette, expand a wider American Civil War collection or add infantry presence beside matching 1:72 historical models and scenery.
Model tools
Italeri Craft Knife Set with 6 Blades
510050822€16.99
The Italeri Professional Craft Knife with 6 blades brings precise cutting control to model making, paper work and other detailed bench tasks. A metal handle with a knurled silver grip, blue upper section and gold collar gives the knife a balanced, tool-like feel in hand while guiding careful cuts along edges, markings and small components. The included blade set supports repeated use across longer projects, with replacement blades ready when a fresh edge is needed for clean trimming. This format suits builders who work through assembly stages over time, especially where accurate scoring, shaping and material removal help parts fit neatly. The 600 minute assembly time in the product data points to projects with a longer build rhythm, where a dedicated cutting tool stays in regular use rather than appearing for a single step. On a modelling bench, the knife can be kept close for opening cut lines, refining small sections and preparing surfaces before the next stage of a build. Used alongside an assembly kit, it supports focused, controlled work on fine details and helps keep intricate hobby tasks precise from the first cut to the final adjustment.
Model tools
Italeri Craft Knife with 5 Blades No. 11
510050818€8.29
The Italeri Craft Knife with 5 blades No. 11 brings a precise cutting tool to model benches and craft tables, combining a slim metal handle with the narrow pointed blade shape used for close, accurate work on small parts and marked lines. The No. 11 format is suited to trimming, scoring and careful carving where a broader blade would block the view of the cut. The handle features a textured knurled section that helps keep finger placement steady during short controlled movements. Alongside the fitted blade, 4 spare blades are supplied, so fresh cutting edges are ready when a task calls for a cleaner pass through paper, masking material or thin modelling stock. Protective caps are also included for covered storage between work stages. Assembly is required. Assembly time: 600 minutes. On a model bench, the knife supports clean preparation before painting, fitting or finishing, and it also suits paper crafts that rely on narrow cuts and sharp corners. The compact format works well for keeping one blade in use while the remaining No. 11 inserts stay ready as replacements for later sessions.
Model tanks
Italeri Cromwell MK. IV Tank Model Kit 1:56
510025754€21.99
Italeri Cromwell MK. IV brings a key British WWII tank into 1:56 scale as a detailed plastic model kit with a compact 11.3 cm finished length. The build centers on the Cromwell's low, purposeful silhouette, tracked layout and turret-mounted 75 mm gun, creating a military model that reads clearly on a shelf and sits naturally alongside tabletop forces. The real Cromwell was developed to replace the Crusader in the Cruiser Tank role, and that background gives the model its distinct character. Its full-size counterpart was known for speed of more than 60 km/h and strong manoeuvrability, balanced with decent armour and armament for engagements against similar armoured vehicles. Italeri translates that identity into a 55-part build that focuses on the hull, turret and suspension-driven running gear rather than oversized complexity. Decals for 2 versions support different finishing choices, and the included markings help place the tank in a more specific historical setting once paint and weathering are applied. On a wargaming table, the 1:56 scale suits formation-based displays and vehicle line-ups; on a shelf, the compact footprint keeps the shape and markings easy to read at a glance. Assembly kit contents are included. Paints, cement and tools are required separately. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Cromwell Mk.IV Model Set Tank 1:56
510075004€24.99
The Italeri Cromwell Mk.IV Model Set brings a fast British Cruiser Tank of the Second World War into 1:56 scale, combining a compact footprint with the distinct proportions of the Cromwell family. Its subject is the Cromwell Mk.IV, a vehicle developed by the British Army to replace the Crusader, with a layout shaped around speed, manoeuvrability and a turret-mounted 75 mm gun. That historical background gives the build a clear identity beyond a generic armoured vehicle. The real Cromwell could reach over 60 km/h, a notable figure for a tank of its period, and its suspension played a central role in balancing pace with control. Armour and armament were matched for engagements against similar armoured vehicles, while the 75 mm gun could use the same ammunition as Allied tanks such as the Sherman. The same vehicle also served in close support for infantry, which adds another authentic context for painting and presentation. On a shelf, in a diorama or alongside other 1:56 military subjects, the finished Cromwell Mk.IV carries a recognisable British wartime profile. The 14 years age marking places the set in a range suited to builders who want a historically grounded tank subject with a defined role, a named variant and a scale that fits broader military collections. Warning! Not suitable for children under 14 years.
Trailers & accessories
Italeri Curtainside Trailer Model Kit 1:24
510003918€59.99
The Italeri 1:24 Curtainside Trailer model kit brings a modern European freight trailer into scale form with a 58.0 cm finished length, a 3-axle layout and sliding canvas sides that define this widely used transport design. The moving side-curtain concept is central to the real trailer type, allowing merchandise loading and unloading from the side rather than only through the rear. This assembly kit represents the trailer with solid tail gates and frame protection, matching the road-going structure seen across general freight transport in Europe. The Schoeni CH livery adds a distinctive logistics look, and the included super decal sheet carries company graphics, regulatory markings, speed signs and trailer details that give the finished model a more complete commercial identity. New wheel rims refine the undercarriage appearance, while the long trailer body creates a strong presence beside a compatible 1:24 tractor unit. The tractor is not included in the box. Paints and tools are required separately. With 600 minutes of assembly time, the build suits model-making sessions that focus on painting, decal application and careful trailer detailing. Once completed, the 58.0 cm trailer works well as a display centrepiece in a truck collection or as part of a 1:24 road transport scene with a separately matched tractor unit.
Model tools
Italeri Cutting Mat A 230 x 160 mm Hobby Mat
510050829€9.99
The Italeri Cutting Mat A brings a defined cutting surface to model benches with a self-healing mat body, a printed measurement grid and diagonal angle guides. Its compact format supports trimming, marking and alignment work in a controlled area, whether sheet material, decals or small model parts are being prepared for the next build step. The mat is shown with a rectangular shape, rounded corners and visible number markings around the edges, giving clear reference points for measuring and positioning. The stated size is 230 x 160 mm, while the mat print shown in the image reads 220 x 180 x 3 mm, so the usable format is presented here only as provided by the product data. The 3 mm thickness shown on the mat adds a defined working layer between the bench and the blade path. Grid intersections and diagonal guides help when checking spacing, repeating cuts or setting angles before a knife touches the surface. On a modelling table, this format suits focused tasks such as trimming decals, cutting masking material or squaring small parts before assembly. Assembly kit for ages 14+; assembly required, assembly time 600 minutes.
Model car kit
Italeri DAF XF 95 Super Space Cab Truck Kit
510093834€61.99
The Italeri DAF XF 95 Super Space Cab arrives as a detailed 1:24 truck kit that recreates one of the most recognisable DAF long-haul vehicles of the 1990s and early 2000s. Its Super Space Cab layout gives the model a commanding road-going look, with the tall cab shape setting the tone for a build that carries the character of a working European tractor unit. This subject draws on a full-size truck known for combining period technology with high operational efficiency on long-haul routes. The spacious cab was regarded among the roomiest on the market, and that distinctive proportion shapes the finished replica from every angle. At the same time, the original vehicle balanced the large cab within a cohesive overall design, so the model presents broad surfaces, a defined front section and a clear commercial-vehicle stance. The detailed kit format leaves room for careful painting and finishing choices that can underline the truck's era and road transport identity. On a worktable, in a display cabinet or alongside other 1:24 commercial vehicle builds, the DAF XF 95 Super Space Cab brings a strong fleet-truck presence. It suits builders who enjoy tractor units with real transport history and a cab design that became a signature part of the vehicle's appeal. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri Dakota Mk. III Aircraft Model Kit 1:72
510101338€34.99
Italeri Dakota Mk. III brings one of the best-known military transport aircraft of the 20th century into a 1:72 aircraft model kit with a finished length of 27.2 cm. The twin-engine Douglas C-47 variant served in logistic transport, tactical transport, paratrooper drops and medical evacuation, giving the subject a strong historical identity before the first parts are even removed from the sprue. The build centers on the Dakota configuration used by the British Royal Air Force and Commonwealth forces, while the marking options widen the scope to 4 different service versions. The airframe is powered in full scale by 2 Pratt & Whitney 1,200 HP engines and reached a top speed of 360 km/h, with a pay-load of 2,500 kg or capacity for 28 troops. Those full-size figures shape the model's broad fuselage, twin-prop layout and transport stance. The kit also allows optional open or closed wing panels, adding a specific display decision during assembly rather than limiting the finished aircraft to a single look. On the bench, the combination of sprue-based construction, painting work and waterslide markings creates a focused aircraft build with visible progress across fuselage, undercarriage and propeller assemblies. Radio gear, a battery pack, a charger and paints are not part of this kit; cement and standard model-building tools are required separately. Once completed, the Dakota Mk. III suits shelf display, diorama scenes or a line-up with other 1:72 military aircraft.
Model tanks
Italeri Dodge WC62 1:35 6x6 Truck Model Kit
510096230€26.99
The Italeri Dodge WC62 1:35 6x6 Truck Model Kit recreates a military transport vehicle introduced in 1943 for United States Army service. As a detailed scale build, it captures the long wheelbase layout, the extra rear axle, and the unmistakable profile of the 1.5-ton truck in a format suited to careful assembly, painting, and display. The original Dodge WC62 was developed to carry equipment or up to 12 fully equipped soldiers, and that heavy-duty role shapes the model's character throughout. Its 6-wheel-drive configuration, sturdy chassis, and leaf-spring suspension define the mechanical layout, while the open cab with fold-down windshield adds a field-use detail that changes the whole look of the vehicle. The full-size truck used a 92 HP Dodge inline 6-cylinder engine, a key part of the design behind its broad wartime use across difficult terrain and changing operational conditions. On the bench, these features give the build a strong historical identity and plenty of scope for military finishes, convoy scenes, and World War II dioramas. The 1:35 scale works well alongside other vehicles, figures, and scenery in the same scale, allowing the completed Dodge WC62 to take its place in a wider period setting. 14 Years marks the recommended age for this model kit. Warning! Not suitable for children under 14 years.
Model aircraft
Italeri Dornier Do 217 J1/J2 Nachtjager 1:72
510091266€35.99
The Italeri Dornier Do 217 J1/J2 Nachtjager in 1:72 turns a notable Second World War night fighter into a detailed plastic kit with a strong technical identity. The twin-engine high-wing layout gives the aircraft its unmistakable silhouette, while the J1/J2 configuration places the build in the role of a dedicated night interceptor. This version of the Do 217 was developed for missions against Allied bombers and carried the Lichtenstein radar for target identification in low-visibility conditions. The forward nose section was heavily armed with 20 mm cannons and 7.92 mm machine guns, giving the aircraft a concentrated frontal weapons layout that stands out on the finished model. Historical source data for this aircraft also notes a maximum speed of 500 km/h, adding another concrete point of reference for the type represented here. On the shelf, the combination of radar equipment, twin-engine structure and high-wing design gives the completed aircraft a distinct presence among military aviation builds. The subject suits builders interested in Luftwaffe night fighter development and in aircraft variants shaped by a specific operational role rather than by general bomber use alone. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri Douglas SBD-3 Dauntless Model Kit 1:48
510002841€30.99
The Douglas SBD-3 Dauntless from Italeri captures a 1:48 scale version of the U.S. Navy carrier-based dive bomber that entered active service in 1941. Its single-engine, low-wing configuration gives the aircraft its unmistakable silhouette, while the SBD-3 variant connects the build directly to one of the most decisive air campaigns of the Pacific War. This aircraft served in both reconnaissance and dive bombing missions, which gives the model a clear operational identity beyond its outline alone. The full-size SBD-3 was powered by a Wright R-1820 Cyclone radial engine and reached 410 km/h, details that anchor the subject in the engineering of the period. Its wartime configuration also included two forward-firing 12.7 mm machine guns and two rear-facing 7.62 mm machine guns, along with a bomb load of nearly 2,000 kg. The Battle of Midway in June 1942 made the SBD-3 especially notable, as this version played a key role in the sinking of Japanese aircraft carriers. On the bench or in a display cabinet, the Dauntless brings together naval aviation history, recognisable aircraft architecture and a clearly documented combat role. Recommended age: 14 years.
Trailers & accessories
Italeri Dumper Trailer 1:24 Scale Model Kit
510003845€57.99
Italeri Dumper Trailer brings a 1:24 scale construction transport subject into model form with the long proportions of a 3-axle semi-trailer, a large tipping bucket and Schmitz Cargobull markings. The finished replica captures the look of a bulk-haul trailer standing ready on rough site access roads or beside a loading area. The trailer concept in the source data is built around earth and building debris transport, and that working role shapes the details throughout the kit. A steel chassis is specified for the original trailer design, while the model adds visible underframe structure, triple wheel stations, mudguards, landing legs, a ladder and a front platform with railings. The tipping body is a central feature, and the instructions show the raised dump position as well as body mounting points and lift-cylinder detail. Open and closed version parts are included for the cover arrangement, adding another distinct configuration to the build. The decal sheet extends the finish with large Schmitz Cargobull graphics, reflective markings, speed decals, technical labels and several European-style registration choices. With a model length of 37.0 cm, the completed trailer has the presence to stand on its own or alongside a matching 1:24 truck tractor. Assembly is required, with a stated assembly time of 600 minutes. Paints are required separately.
Military aeroplane models
Italeri EF-111 A Raven Aircraft Model Kit 1:72
510001235€31.99
Italeri EF-111 A Raven brings a distinctive electronic warfare aircraft into 1:72 scale, combining the swept lines of the F-111 platform with the prominent rear-fin fairing that set the Raven apart in service. The grey injection-moulded parts frame the aircraft as a detailed bench build, where the variable-geometry wing layout, twin-engine fuselage form and military markings come together in a compact display model. The subject draws on the General Dynamics EF-111 Raven, an aircraft developed from the F-111 Aardvark for electronic warfare missions. Source details for this kit highlight terrain-mapping radar, radar jamming systems, electronic countermeasures and a redesigned cockpit configured for the Electronic Warfare Officer, giving the finished model a strong technical identity beyond its airframe shape alone. The kit also provides external stores, landing gear components, canopy parts and finely moulded surface sections that support careful painting and finishing work. A new super decals sheet covers 2 versions, including serial 67-0052 from the 42nd ECS, 66th ECW at RAF Upper Heyford in July 1987, and serial 66-0019 from the 429nd ECS, 27th ECW at Cannon AFB, New Mexico, in 1995. With an assembly time of 600 minutes, this aircraft model suits an extended build paced across several sessions at the workbench. Once painted and marked, the EF-111 A Raven sits naturally in an aviation collection, on a shelf with other 1:72 military aircraft, or as a standalone display focused on Cold War and modern air power subjects. Model for adult modellers age 14 and over. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri F-104 G Recce Aircraft Model Kit 1:72
510001296€17.99
Italeri F-104 G Recce captures the unmistakable Starfighter silhouette in 1:72 scale, pairing the aircraft's needle-like fuselage with a finished length of about 231 mm for a display model that reads clearly on a shelf or in a collection. This assembly kit centers on the reconnaissance-equipped F-104G, a version that added the external Orpheus pod to the type's established interceptor role. The Lockheed F-104 Starfighter entered service at the end of the 1950s and remained in use with some air forces into the mid 2000s, giving this subject a long operational story behind its compact dimensions. The real aircraft used a General Electric J79-GE-11A afterburning turbojet engine and could exceed Mach 2.2, a performance profile reflected in the sharply drawn airframe and very small wing surface. The kit also reflects the F-104G's multinational service, with the type produced under license in Europe and flown by NATO operators including Italy, Germany, Holland, Greece and Turkey. Decals for 3 versions expand the finishing options with national markings, serials and stencil detail. During assembly, the cockpit, landing gear, external stores and reconnaissance fit give each stage a distinct focus, while painting and decal application shape the final character of the aircraft. The 600-minute build time suits a measured bench session, whether the model is being finished as a clean display piece or as part of a broader Cold War aviation lineup. Radio gear, a battery pack, a charger and paints are not part of this assembly kit.
Military aeroplane models
Italeri F-104G/S Starfighter Model Kit 1:32
510002514€104.99
Italeri F-104G/S - RF-104G Starfighter - Upgraded Edition brings the sharp lines of the Lockheed Martin aircraft into a 1:32 scale plastic kit with Pod Orpheus parts for an RF configuration. The long fuselage, pointed nose and external stores create a striking bench presence while the larger scale leaves room for a more involved finish across panels, markings and equipment. The assembly kit is designed for builders aged 14+ and develops over 600 minutes, giving time to work through subassemblies, alignment and paint stages with care. Photo-etched parts add finer metal detail where thinner components matter visually, especially when the model is viewed up close. The marking set goes beyond basic insignia: the decal sheets carry serials, rescue arrows, no-step stencils, squadron badges and national symbols that help define different service appearances. Markings for equipment such as Pod Orpheus and other airframe details support a more technical finish across pylons, tanks and reconnaissance fittings. On the workbench, the larger 1:32 format suits careful painting, decal placement and weathering, whether the focus is a cleaner operational look or a more used airframe. Once completed, the Starfighter's slim silhouette, metallic surfaces and variant-specific markings give the aircraft a strong display character in a collection of modern military aviation subjects. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri F-111A Aardvark Model Kit 1:72
510091232€31.99
The Italeri F-111A Aardvark model kit in 1:72 scale brings a landmark military aircraft into a compact build with a strong technical identity. The General Dynamics F-111 Aardvark combined twin-engine power, supersonic performance and variable-sweep wings, creating a silhouette that still stands apart in aviation history. Produced from the late 1960s and used until the late 1990s, the original aircraft marked a major step in combat aircraft design. It was capable of reaching Mach 2.5 and carrying a substantial offensive payload, while a pressurized cockpit placed its 2 crew members side by side rather than in tandem. An escape module formed part of the emergency ejection system, adding another distinctive engineering feature to the aircraft itself. Sophisticated radar and terrain-following systems allowed low-level flight in poor visibility conditions, a capability that shaped its role in nighttime bombing missions and low-altitude attack profiles. That combination of swing-wing engineering, 2-seat cockpit layout and long service history gives the finished 1:72 aircraft a strong presence in military aviation displays. The subject suits builders aged 14 years and up who want a model linked to Vietnam War operations and late Cold War aircraft development. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri F-117A Stealth Nighthawk Model Kit 1:72
510000189€14.99
The Italeri 1:72 F-117A Stealth Nighthawk model kit brings the unmistakable lines of Lockheed's stealth aircraft into a 28 cm display format. Its sharply faceted fuselage, canted tail fins and low-profile planform give the finished aircraft the same angular presence that made the original design instantly recognizable on the flight line. This assembly kit is built around the F-117A's signature geometry rather than rounded conventional jet shapes, which gives each stage of the build a precise, technical character. The parts layout shown for the kit covers the main airframe, clear canopy elements, landing gear components, bay doors and smaller detail pieces that shape the underside and cockpit area. A decal sheet for 1 version supports the finishing stage with aircraft markings tied to the featured scheme. The source material for this subject points to the 4450th Test Group, USAF, Tonopah, 1989, giving the completed aircraft a defined historical setting. Assembly is required, with a stated build time of 600 minutes. On the bench, the 1:72 scale suits careful painting, decal placement and detail work without demanding the footprint of a larger aircraft build. Once completed, the 28 cm model sits comfortably in a display cabinet, on a shelf or alongside other military aircraft in the same scale, where the black finish, angular wing surfaces and twin fins create a striking silhouette from every angle.
Military aeroplane models
Italeri F-14A TOMCAT Aircraft Model Kit 1:48
510002667€29.99
The Italeri F-14A TOMCAT brings the lines of the U.S. Navy's carrier-based fighter into a 1:48 aircraft model kit with a finished length of 39 cm. Its shape is defined by the Tomcat's twin-engine layout, broad fuselage and swing-wing configuration, giving the completed build the unmistakable stance of this long-serving naval aircraft. The assembly kit uses molded parts to form the cockpit, fuselage, tail surfaces and undercarriage, while the internal wing linkage lets both variable-sweep wings move in sync. The build sequence also calls for 30 g of ballast in the nose, a practical detail that supports correct balance once the landing gear is fitted. Clear canopy parts frame the cockpit area, and the external stores layout adds further substance with missiles, pylons and drop tanks mounted under the airframe. Decals for 1 version provide the markings needed to finish the aircraft in a specific service scheme. Assembly is required and takes 600 minutes. On the workbench, the mix of structural assembly, painting and decal placement creates a project with distinct stages rather than a single quick session. Once completed, the 39 cm model suits display on a shelf, in a cabinet or alongside other 1:48 military aircraft, where the swept planform, twin tails and carrier-jet loadout stand out clearly.
Military aeroplane models
Italeri F-15C Eagle Model Kit 1:48 Scale
510092763€41.99
The Italeri F-15C Eagle model kit in 1:48 scale captures one of the best-known modern fighter aircraft in a format that suits a detailed bench build and a striking finished display. As a single-seat all-weather jet developed to secure air superiority, the F-15C brings a clear operational identity to the project, with sharp lines and a purposeful twin-engine layout that stand out once assembled. This plastic kit draws on the C version of the McDonnell Douglas F-15, the evolution that remained in wide service with the U.S. Air Force and U.S. National Guard and also flew with the air forces of Israel, Japan, and Saudi Arabia. The type played an active role in the first Gulf War, where it achieved the highest number of enemy aircraft shootdowns for Coalition forces. That background gives the finished aircraft a strong historical setting beyond its technical form. The full-size jet combines a 20 mm M61 cannon with a broad air-to-air weapons capability, while the twin Pratt & Whitney F100 afterburning engines pushed performance to Mach 2.5. On the workbench, those defining features translate into a military aircraft subject with a clear late-Cold-War and Gulf War presence. The 1:48 scale gives the F-15C enough visual presence for shelf display while still fitting comfortably into a focused build session. Recommended age: 14 years and up. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri F-15E Strike Eagle Model Kit 1:72
510090166€21.99
The Italeri F-15E Strike Eagle model kit brings a late-Cold War and post-Cold War combat aircraft into 1:72 scale with the compact footprint and visual presence that suit aircraft displays. As a detailed plastic kit, it focuses on the two-seat strike version of the Eagle, a jet shaped for all-weather fighter-bomber duties and recognised by its broad stance, twin tail fins and mid-wing layout. The subject traces back to a McDonnell Douglas design programme begun in the 1970s for United States Air Force fighter squadrons, with the F-15E entering service in the late 1980s as a replacement for the F-111. Its operational profile covered ground attack, bombing and interdiction missions, and the tandem cockpit placed a Weapon Systems Officer in the rear seat for route management, target tracking and electronic countermeasures. Those role-specific details give the finished model more than a familiar outline, connecting the airframe to a defined mission type within modern military aviation. On the bench, the 1:72 format keeps the build manageable while still presenting the distinctive proportions of the Strike Eagle. Once assembled, the model sits naturally among modern jet subjects and brings clear historical reference to collections centred on USAF aircraft and late-20th-century air operations.
Military aeroplane models
Italeri F-16 C/D Night Falcon Model Kit 1:72
510000188€16.99
Italeri F-16 C/D Night Falcon is a 1:72 aircraft model kit that captures the sharp lines of this multi-role fighter in a special night version. The finished model measures 21 cm in length, giving the swept wings, single-engine fuselage and tail surfaces enough scale presence to read clearly once assembled. The assembly kit is built around detailed airframe parts, including fuselage sections, cockpit components, landing gear and external stores mounted under the wings and fuselage. The instruction material shows alternative version choices for F-16 A/C and F-16 B/D layouts, with different cockpit arrangements and version-specific parts used during the build. Decals for 3 versions add serials, warning markings, insignia and squadron identifiers, so the final finish can move beyond a plain airframe into a more complete service look. The subject itself is presented as a Night Falcon variant, which gives the model a distinct identity within the wider F-16 family. With 600 minutes stated for assembly, this kit suits a slower, step-by-step build rhythm where painting, decal placement and final fitting each have room for attention. The 14 Years marking places it in the hobby model category, and the 1:72 scale works well for display alongside other military aircraft in the same scale.
Model tanks
Italeri F-16 C/D Night Falcon Model Set 1:72
510072009€30.99
The Italeri F-16 C/D Night Falcon Model Set 1:72 brings a modern military jet into a compact scale build with a detailed assembly kit and a clearly defined aircraft subject. The F-16 design stands out through its frameless bubble canopy, side-mounted control stick and fly-by-wire concept, features that made the original aircraft one of the most recognisable multirole fighters of its era. Developed from a day fighter into an all-weather multirole aircraft, the F-16 combined manoeuvrability with broad operational flexibility, and that background gives this model a strong technical identity on the workbench. The full-size aircraft is equipped with a 20 mm M61 Vulcan internal cannon and can carry missiles and bombs on its hard points, details that shape the character of the finished replica. Reference markings shown for the Night Falcon schemes add another layer of realism, with unit codes, insignia and camouflage placement guiding the final look. Assembly is required, and the stated build time is 600 minutes. During the build, the 1:72 scale keeps the model manageable on a desk while still leaving room for careful finishing work on the fuselage, wings and tail. Once completed, the Night Falcon theme and military paint scheme give the aircraft a crisp display presence, whether placed in a collection cabinet or used as the centrepiece of an aircraft model lineup.
Military aeroplane models
Italeri F-16A Fighting Falcon Model Kit 1:48
510002786€35.99
The Italeri 1:48 F-16A Fighting Falcon assembly kit captures one of the most recognizable modern fighter aircraft in a scale format that gives the finished model a length of 31.5 cm. The subject is the F-16A, a single-seat aircraft known for its frameless bubble canopy, side-mounted control stick and fly-by-wire control system, features that shaped its role as a highly agile multirole jet. This kit centers on the aircraft's distinctive layout and mission equipment. The F-16A airframe combines a compact fuselage, swept wings and underwing hard points that can carry a wide range of external stores, reflected here through the included assembly parts for the build. The original aircraft also carries a 20 mm M61 Vulcan internal cannon and modern avionics, details that place the model firmly in the context of late 20th century military aviation. A super decals sheet for 5 versions expands the finishing options with different unit markings and commemorative graphics, while the color instruction sheet supports accurate paint placement during the final stages. Across the workbench, the project moves through assembly, painting and decal application over 600 minutes, making it a substantial aircraft build for ages 14 years and up. On a shelf or in a display cabinet, the completed F-16A stands out through its familiar canopy line, slim nose and combat-ready wing layout.
Military aeroplane models
Italeri F-16C Fighting Falcon 1:48 Model Kit
510035105€39.49
Italeri F-16C Fighting Falcon War Thunder brings one of the most recognizable modern combat aircraft into a 1:48 scale model kit with the sharp proportions, single-seat layout and clean fighter profile that define the original jet. The F-16 shape stands out through its frameless bubble canopy, a feature developed to give the pilot broad visibility, and that distinctive silhouette carries straight into the finished display model. The real aircraft was developed in the late 1970s as a day fighter for the United States Air Force before evolving into an all-weather multirole platform, and that background gives this subject a wide operational character. The F-16 is known for a side-mounted control stick, fly-by-wire control system and modern avionics, details that make it a landmark design in military aviation history. Armament on the full-size aircraft includes a 20 mm M61 Vulcan internal cannon, while hard points allow a broad weapons fit with missiles and bombs. This edition also adds new parts and a super decals sheet for 6 versions, opening up different liveries, unit markings and finishing choices during the build. On the bench, the decal options support aircraft from operators and units such as Ohio ANG, 64th AGRS and Pakistan Air Force, each with its own camouflage layout, tail markings and stencil pattern. The result is a build that rewards careful painting, decal placement and weathering, then settles into a display piece with a strong military aviation presence. Radio gear, a battery pack, a charger and paints are not part of this kit. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri F-35A Beast Mode Aircraft Kit 1:72
510001464€34.99
Italeri F-35A Beast Mode brings the look of a fifth-generation multirole combat aircraft into a 1:72 aircraft kit with a strong focus on the CTOL version and its heavily armed configuration. The single-seat, single-engine jet is presented with trapezoidal wings, angular stealth shaping and the open internal weapons bay that defines the Beast Mode appearance in combination with external stores. This detailed assembly kit is built over 600 minutes and centers on the F-35A Lightning II in its conventional take off and landing form. The subject comes from the Joint Strike Fighter program and represents an aircraft developed for air superiority, close air support and ground attack missions. New parts are included for this configuration, and the super decals sheet covers 6 versions for varied finishing work. The airframe's advanced layout, from the canted tail fins to the compact fuselage lines, gives the completed model a crisp modern silhouette that stands apart in a military aviation collection. On the workbench, the 1:72 scale supports precise painting and measured decal application without demanding a large display footprint. Once completed, the model suits shelf display alongside other modern aircraft builds or a focused contemporary air power lineup, with the open bay and external weapons load giving the finished jet a more mission-configured stance.
Military aeroplane models
Italeri F-35A Lightning II 1:48 Aircraft Kit
510002836€72.99
Italeri F-35A Lightning II (Beast Mode) presents the conventional takeoff and landing version of the Joint Strike Fighter as a 1:48 scale aircraft kit, translating the jet's angular silhouette into a detailed plastic build. The single-seat, single-engine layout and trapezoidal wing plan give the model the unmistakable outline associated with the F-35 family. The subject draws on a fifth-generation all-weather multirole combat aircraft developed to replace United States and NATO strike-fighters. In this version, the F-35A represents the CTOL configuration, distinct from the F-35B short takeoff and vertical landing variant and the F-35C carrier-based version with foldable wings. Stealth technology, advanced hi-tech materials and modern avionic systems define the full-scale aircraft and shape the character of the model. The Beast Mode designation adds another layer of interest by focusing attention on a heavily armed mission profile within the F-35A concept. On the workbench, the 1:48 scale gives the aircraft enough presence for the wing shape, fuselage lines and overall proportions to read clearly during assembly and once complete. Recommended from 14 years, the kit suits builders drawn to current military aviation subjects, whether the finished aircraft joins a modern air power collection or stands alone as a focused JSF build.
Military aeroplane models
Italeri F-35A Lightning II Model Kit 1:72
510001409€28.99
Italeri F-35A Lightning II is a 1:72 scale assembly kit that brings the conventional takeoff and landing variant of this fifth-generation combat aircraft to the workbench. The finished model measures 21.4 cm and recreates the jet's low-profile silhouette, trapezoidal wings and single-engine configuration in a compact display format. The subject is drawn from the Joint Strike Fighter program, developed to create a multirole aircraft for air superiority, close air support and ground attack missions. This F-35A version represents the CTOL configuration, distinct from the short takeoff and vertical landing F-35B and the carrier-based F-35C with foldable wings. The kit uses detailed molded parts for the airframe and is paired with a color instruction sheet to support painting and marking placement. A super decals sheet provides markings for 5 versions, including airframe stencils, insignia and ordnance details that add a more technical finished look. Across a build time of 600 minutes, the project moves through assembly, painting and decal application into a finished aircraft suited to shelf display, diorama use or a modern military aviation collection. The compact 1:72 format also makes it practical for builders who enjoy comparing different aircraft types and variants within the same scale.
Model aircraft
Italeri F-35B Lightning II 1:48 Model Kit
510092810€72.99
The Italeri F-35B Lightning II 1:48 model kit brings one of the defining combat aircraft concepts of 21st century military aviation into a detailed scale build. Its subject is the single-seat, single-engine F-35B, the STOVL variant developed within the Joint Strike Fighter program and shaped for multirole use in all-weather operations. The airframe is marked by trapezoidal wings, stealth-led lines and the compact proportions associated with the F-35 Lightning II. The real aircraft combines air superiority, close air support and ground attack roles, and this version focuses on the configuration created for short take off and vertical landing. That operating concept is tied to the Pratt & Whitney afterburning turbofan and the swivel nozzle that directs engine thrust, giving the F-35B its distinctive technical character. In 1:48 scale, those defining features translate into a build that centres on form, structure and the recognisable profile of the jet. The carrier-based context adds further depth, with the F-35B designed to operate from ships such as H.M.S. Queen Elizabeth and the Italian Navy flagship Cavour. The 14 years marking suits a project built around careful assembly, painting and display, whether the finished aircraft joins a modern aviation collection or stands alone as a contemporary military subject. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri F-35B Lightning II 1:72 Model Kit
510001425€34.99
Italeri F-35B Lightning II 1:72 Model Kit brings the STOVL version of the Joint Strike Fighter into a compact aircraft build with a finished length of 21.7 cm. The single-seat, single-engine jet is shaped around the distinctive features of the F-35B configuration, including the lift-system layout and the surfaces associated with short take-off and vertical landing operations, giving the completed aircraft a recognisable modern carrier-borne silhouette. This detailed plastic kit is based on 100% new moulds and focuses on the angular fuselage, trapezoidal wings and stealth-driven form of the original aircraft. The decal sheet supports 3 versions, covering Royal Navy Lightning Force, U.S. Marine Corps VMFA-121 and Marina Militare markings, so the same airframe can be finished in different service identities. The included U.S. 'Beast mode' external armament set adds another display direction by fitting the aircraft with a heavier external weapons configuration. Assembly time is stated as 600 minutes. On the workbench, the combination of new mould tooling, multiple marking choices and the external stores set supports a build that can be approached as a clean flight deck aircraft or a more heavily armed operational machine. Once completed, the 1:72 scale makes the model easy to place in a display cabinet, on a desk or alongside other modern military aircraft in the same scale.
Military aeroplane models
Italeri F-35B Lightning II Model Kit 1:48
510002810€76.99
Italeri F-35B Lightning II is a 1:48 aircraft model kit based on the STOVL version of the Joint Strike Fighter, the configuration developed for short take-off and vertical landing operations. The single-seat, single-engine layout and the aircraft's distinctive stealth shaping give the finished build a crisp modern silhouette suited to carrier-deck display scenes. This assembly kit focuses on the details that define the F-35B configuration. The airframe reflects the trapezoidal wing design and the advanced multirole fighter concept behind the original aircraft. A photo-etched fret is included for finer metal parts, adding extra definition where thinner scale components matter. The decal sheet supports 6 versions with a wide range of maintenance stencils, warning markings, insignia and unit graphics, allowing the surface finish to carry the dense visual language seen on operational aircraft. Included external stores broaden the display options, and the set also contains the U.S. version 'Beast mode' loadout as well as 2 weapons trolleys to extend the scene beyond the aircraft itself. With 600 minutes assembly time, the build suits model makers who enjoy a longer bench session with painting, marking and final presentation as distinct stages. Paints, cement and tools are required separately. Once completed, the model fits naturally into modern military aviation collections, carrier-deck dioramas or shelf displays centered on 21st century combat aircraft.
Military aeroplane models
Italeri F-35C Lightning II Aircraft Kit 1:72
510001469€41.99
Italeri 1:72 F-35C Lightning II brings the carrier-based Joint Strike Fighter into a detailed aircraft build shaped around the naval CATOBAR variant. The single-seat airframe combines stealth-driven lines with a trapezoidal wing plan, creating the distinctive silhouette of the F-35 family in a compact display scale. This plastic assembly kit focuses on the features that set the F-35C apart from the F-35A and F-35B. Folded wingtips reflect shipboard storage needs, while the rear arrestor hook and reinforced frontal gear match carrier launch and recovery equipment used on U.S. Navy aircraft carriers. The airframe can be built in different setups, and the kit adds parts for a 'beast mode' configuration with external stores. A super decals sheet provides markings for 4 versions, and the included mask stickers support sharper work on clear sections during painting. Assembly kit contents are included. Paints, cement and tools are required separately. Across the workbench, the 1:72 scale keeps the project manageable while still leaving room for naval aircraft details and loadout choices. Once completed, the model suits shelf display, aviation collections or a carrier-deck themed lineup with other modern military aircraft. The 14 Years marking and 600-minute assembly time place the focus on a more involved model-building session with finishing, marking and configuration decisions along the way. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri F-4 C/D/J Phantom Aces Model Kit 1:72
510101373€27.99
Italeri F-4 C/D/J Phantom Aces brings the shape of the Phantom II into a 1:72 scale model kit with a finished length of 26.7 cm and markings drawn from Vietnam-era U.S.A.F. and U.S. Navy aircraft. The assembly kit centers on the aircraft's long fuselage, swept wings and external stores, creating a build that carries the unmistakable profile of one of the period's best-known jets. The detailed plastic kit is supplied unassembled and is intended for a full model-building process with an indicated assembly time of 600 minutes. That longer build window suits careful work on alignment, surface preparation and paint application across the different F-4 C, D and J configurations named in the set. Decal and livery references connect the model to ace pilots including Jeffrey S. Feinstein, Charles Barbin 'Chuck' DeBellevue, Richard Stephen 'Steve' Ritchie and Robin Olds. The subject matter adds historical depth beyond a single airframe by linking the finished aircraft to specific combat-marked versions. On the bench, the kit lends itself to measured assembly sessions, detail painting and decal placement across the airframe and external tanks. Once completed, the 1:72 format fits naturally into aircraft collections, display cabinets and Vietnam War aviation lineups while still offering enough surface area for markings to stand out clearly.
Military aeroplane models
Italeri F-4E Phantom II Model Kit 1:48 Scale
510002770€37.99
The Italeri F-4E Phantom II brings one of military aviation's most recognized jet aircraft into a 1:48 scale build with a finished length of 40.0 cm. Its tandem two-seat layout, broad airframe and underwing loadout give the model a strong runway presence, whether placed as a standalone display piece or worked into an airbase scene. Developed by McDonnell Douglas, the original Phantom II was created for the U.S. Navy before moving into service across all U.S. forces and many operators worldwide. This F-4E version represents the U.S. Air Force variant and is defined by the M61 Vulcan cannon in the nose. The aircraft's all-weather, supersonic fighter-bomber role gives the build a clear technical identity, while the twin General Electric J-79 jet engines connect the model to the full-scale aircraft's top speed of 1,240 knots. The included assembly kit leaves room for careful painting and finishing work, and paints are required separately. Markings play a major role in the final look. The super decals sheet for 4 versions adds squadron codes, serials, warning stencils, instrument panel details and national insignia, allowing different service appearances to be recreated with precision. External fuel tanks and missile loadout details reinforce the Phantom II's air-superiority mission profile, making the completed aircraft look convincing on the ground with canopies open or in a more action-led display setting. Assembly time is stated as 600 minutes.
Military aeroplane models
Italeri F-5A Freedom Fighter Aircraft Kit 1:72
510001441€22.99
The Italeri 1:72 US F-5A Freedom Fighter brings a classic Cold War jet into a compact aircraft kit with a crisp silhouette, swept wings and the lean proportions that made the original Northrop design so distinctive in service. Fine molded surface detail and the small overall footprint suit a display shelf while still leaving room for careful finishing work across the fuselage, wings and tail. This assembly kit is designed for builders aged 14 years and over and has a stated assembly time of 600 minutes. The subject reflects the early F-5A configuration, a light single-seat fighter powered on the real aircraft by 2 General Electric J85-GE-13 engines and armed with 2 nose-mounted 20 mm guns. The kit also supports multiple finishing paths through a decal sheet with markings for 6 versions, covering aircraft from the Netherlands, Norway, Spain, South Vietnam, Canada and Venezuela. Instruction diagrams shown in the set outline cockpit assembly, rear fuselage construction, external stores placement and an alternative open-canopy display. On the bench, that mix of compact scale, variant choice and detailed markings creates a focused build with plenty of visual contrast between camouflage layouts, anniversary striping and national insignia. Once completed, the model suits display with the canopy closed or open, and the different livery options allow one airframe to be finished as a demonstration jet, operational fighter or commemorative aircraft. Paints, cement and tools are required separately.
Military aeroplane models
Italeri F-84G Thunderjet Model Kit 1:72
510001321€21.99
The Italeri F-84G Thunderjet model kit in 1:72 brings one of the defining early jet fighter-bombers of the postwar era onto the workbench. Developed by Republic for the USAF, the F-84 used a simple yet effective aerodynamic layout with a large circular front air intake, straight wings and tricycle landing gear, creating a silhouette that stands apart from later swept-wing jets. The F-84G entered production in 1951 as one of the final versions of the Thunderjet line. Power in the original aircraft came from a General Electric/Allison J35 engine, enabling speeds of up to 1,000 km/h. Beyond USAF service, the type was operated by many NATO countries through the Mutual Defense Assistance program, and from 1952 it equipped several fighter units of the Italian Air Force. That operational background gives the finished aircraft a strong historical setting, whether the focus is on early NATO aviation, USAF subjects or Italian postwar markings. The full-scale aircraft carried six 12.7 mm machine guns and an offensive load of nearly 900 kg, underlining its role as a jet-powered fighter-bomber rather than a pure interceptor. With age 14+ stated for the kit, the subject suits builders looking for a compact military aircraft with clear historical identity and recognisable engineering features for display after assembly.
Military aeroplane models
Italeri F-86E Sabre Aircraft Model Kit 1:48
510002799€31.99
Italeri F-86E Sabre brings a landmark post-war jet fighter into 1:48 scale with a finished model length of 23.8 cm. The swept-wing layout, large front air intake and single-engine configuration give the aircraft its unmistakable silhouette, whether the completed build is placed in a cabinet or set alongside other military aviation subjects. This assembly kit focuses on the character of the North American-designed Sabre, an aircraft that became closely linked with early jet combat and Korean War history. The General-Electric J47 engine is part of that original aircraft story, and the model reflects the clean fuselage lines and wing form that defined the type. Super decals for 4 versions open up different marking directions, while the colour instruction sheet supports accurate placement and paint planning during the finishing stages. With a stated assembly time of 600 minutes, the project suits builders who enjoy a longer, detail-led process rather than a quick session. On the workbench, the 1:48 scale gives enough surface area for careful painting, decal application and small finishing touches to stand out. Once completed, the F-86E Sabre fits naturally into historic aircraft collections, Cold War displays or line-ups centred on classic jet development.
Military aeroplane models
Italeri F-8E Crusader Aircraft Model Kit 1:72
510001456€24.99
Italeri F-8E Crusader is a 1:72 aircraft model kit that captures the lean profile of the carrier-based fighter known as "The last of the Gunfighters". The finished build reflects the distinctive layout of the original Vought design, including the large front air intake, swept wings and naval jet silhouette that made the Crusader a standout on carrier decks. The full-size F-8 was the first carrier-based fighter from the 1950s to reach supersonic performance, powered by a Pratt & Whitney turbojet engine with afterburner and capable of exceeding Mach 1.8. Italeri builds this historic subject around the F-8E version, the long-serving variant used by U.S. Navy and U.S. Marine Corps squadrons and deployed into the Vietnam War period. The aircraft's armament history also shapes the character of the model, with the real machine carrying four 20 mm guns beside the intake and a varied weapons load of air-to-air missiles, rockets and bombs. A super decals sheet for 6 versions expands the finishing options with squadron markings and service stencils drawn from naval and marine use. Across the workbench, the 600 minute assembly time supports a more involved build with painting and marking stages that bring out the Crusader's operational look. Once completed, the 1:72 scale format suits shelf display, aviation collections or a line-up with other Cold War aircraft while keeping the focus on the jet's sharp nose, intake markings and carrier fighter stance.
Military aeroplane models
Italeri F/A-18F U.S. Navy Special Colors Kit
510002823€44.99
Italeri F/A-18F U.S. Navy Special Colors brings the lines of the carrier-based Boeing fighter into a 1:48 assembly kit with a strong focus on squadron markings and surface detail. The finished model captures the larger Super Hornet airframe with its twin-engine layout, revised wing shape, engine intake ramps and enhanced tail design, giving the aircraft a purposeful presence on the bench and in a display setting. The kit is built from molded parts that form the fuselage, wings, cockpit, landing gear and external stores, with decor elements used to place unit insignia, serials, warning stencils and cockpit details. Marking references in the set cover aircraft such as VFA-41 Black Aces, VFA-94 Mighty Shrikes, the U.S. Navy Strike Tactics Instructor Program aircraft from NAS Fallon, and VFA-11 Red Rippers. An alternative canopy arrangement is shown in the instructions, and the build also allows preparation for a ladder option through an indicated hole-opening step. Assembly time is stated as 600 minutes. Glue, paints and tools are required separately. This model suits long, concentrated building sessions where painting, decal placement and subassembly work shape the final result step by step. Once completed, the 1:48 scale format gives the special color schemes, tail art and underwing loadout details enough space to stand out clearly.
Model car kit
Italeri Fiat 500 Abarth 2008 Model Kit 1:24
510003674€36.99
The Italeri Fiat 500 Abarth 2008 model kit brings a modern small performance car into 1:24 scale, translating the shape of the Fiat Group successor introduced in 2007 into a detailed build. Its design draws directly on the classic Fiat 500 first launched in 1957, then sharpens that familiar outline with the more aggressive character of the Abarth version. The body styling is defined by concrete Abarth cues named in the source design: air intakes, side skirts and larger bumpers. Those elements change the visual balance of the compact car, giving the shell a lower, more purposeful stance than the standard Fiat 500. The full-size car also introduced mechanical changes such as a turbocharged engine, sporty exhausts and lowered suspension, and that background gives the finished model its distinct identity within modern Italian road-car history. With MinimumAge marked at 14 Years, the kit is positioned for builders ready for a more detailed assembly project. On the bench, the 1:24 format offers enough presence to show the proportions clearly while remaining manageable for painting and display. Once completed, the compact dimensions of the original design make the model easy to place in a collection of modern road cars, Italian vehicles or Abarth-themed builds.
Military aeroplane models
Italeri FIAT CR.42 CN Falco Night Fighter 1:72
510001485€16.79
The Italeri FIAT CR.42 CN Falco Night Fighter in 1:72 scale captures one of the last operational biplane fighters of the late 1930s in a compact aircraft model kit with a strong historical profile. The subject combines the familiar fixed landing gear and open cockpit layout of the C.R. 32 lineage with the dedicated CN night fighter configuration, giving the finished aircraft a distinct silhouette on the display shelf. The original C.R. 42 introduced an aluminum and steel structure covered with metal and fabric, and that mixed construction gives this aircraft its characteristic surface contrast. Power came from the Fiat A.74 air-cooled radial engine, which pushed the full-size fighter to 400 km/h and shaped the compact nose profile seen on the model. Italeri also marks this release with new parts, focusing the build on the Night Fighter version with its extended exhausts, a feature developed to reduce visibility during nighttime operations. The set also provides a super decals sheet for 5 versions, opening several marking directions for the same airframe. On the bench, the biplane layout, radial engine front and period undercarriage create a build with plenty of classic aviation character in a manageable 1:72 format. Once finished, the model suits historical aircraft collections, WWII aviation displays and diorama scenes centered on night interception or Regia Aeronautica subjects. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri FIAT CR.42 Falco 1:48 Fighter Kit
510002842€30.99
The Italeri FIAT CR.42 Falco 1:48 Fighter Kit captures one of the last operational biplane fighters in a format that puts its structure and period character at the center of the build. Fixed landing gear, an open cockpit and the compact radial-engine nose give the aircraft its unmistakable outline, while the 1:48 scale leaves room for crisp surface detail across wings, fuselage and tail. This plastic kit is based on the assault and night fighter version of the FIAT CR.42 Falco and reflects the mixed construction of the original aircraft, which combined aluminum and steel structure with metal and fabric covering. The real aircraft used the Fiat A.74 air-cooled radial engine and reached 400 km/h, a figure that helps place the model in the final phase of biplane fighter development. Inside the box, the sprues provide the main airframe components, struts, landing gear parts, engine sections and external stores for a build with clear mechanical character. A super decals sheet for 4 versions adds squadron insignia, codes and stencil markings for different historical finishes. On the workbench, the wing struts, wheel fairings and cockpit area create a build with distinct stages and visible progress. Once painted and marked, the completed aircraft suits a display shelf, a historical aviation collection or a line-up of World War II fighters with contrasting monoplane and biplane forms. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri Fiat CR.42 Falco Aircraft Kit 1:72
510001437€17.99
The Italeri Fiat CR.42 Falco brings a late-1930s Italian fighter into 1:72 scale with the unmistakable layout of a single-seat biplane. Fixed landing gear, an open cockpit and the compact 11.5 cm finished size give the aircraft a clear period character that stands out in a display of historic aviation subjects. The original Fiat C.R. 42 was developed from the earlier C.R. 32 and combined traditional biplane configuration with newer structural solutions, including an alloy and steel frame covered with canvas and metal panelling. Italeri translates that aircraft into a detailed plastic kit that invites careful assembly and finishing. The subject is tied to the Battle of Britain period, when Fiat C.R. 42 aircraft served with the Italian Regia Aeronautica within the Corpo Aereo Italiano. A supercharged air-cooled Fiat A.74 radial engine powered the full-size aircraft to 400 km/h, while its manoeuvrability made it well regarded by Italian pilots. The super decals sheet opens 6 marking versions, so the finished model can be approached as a specific historical aircraft rather than a generic biplane. With a stated assembly time of 600 minutes and an age marking of 14 years and up, the build suits modellers who enjoy painting camouflage, placing unit insignia and refining small details across wings, fuselage and tail. Warning! Not suitable for children under 14 years.
Model car kit
Italeri FIAT Mefistofele 1:12 Model Kit 1923-25
510104701€189.99
The Italeri FIAT Mefistofele 21706c.c. 1923-25 brings one of motor racing's most extreme machines into 1:12 scale, with a finished model length of 45 cm that gives the car's stretched proportions and towering bodywork real presence on the shelf. Based on upgraded Protar moulds, this assembly kit focuses on the distinctive engineering of the record car known as Mefistofele. Its design reflects the original machine built around the old Fiat SB4 chassis and the huge Fiat A-12 liquid-cooled aircraft engine with over 20,000 cm3 capacity. The bodywork rises high to house that engine, and the model translates those unusual proportions into a build that stands apart from later Grand Prix cars. More than 500 parts create room for mechanical depth across the chassis and engine area, while the opening bonnet lets the internal detail stay visible after assembly. Working steering adds another authentic function to the finished car. The historic background gives the model extra character: on 12 July 1924 at Arpajon, Ernest Eldridge drove the original car to 146.01 mph, over 230 km/h, to set the World Land Speed Record. That story carries into the finished replica, whether displayed with the bonnet raised to show the engine detail or set in a clean side profile that highlights the long red body, spoked wheels and bold FIAT markings. Assembly time is stated as 600 minutes. Paints are required separately.
Military figures & accessories
Italeri Field Tool Shop Model Kit 1:35 Scale
510100419€9.49
Italeri Field Tool Shop brings a 1:35 scale maintenance area into a model scene with a broad selection of workshop accessories and service equipment. The assembly kit is built around the look of a field repair station, where lifting gear, hand tools and storage pieces turn open ground or a vehicle bay into a convincing working environment. The set uses unassembled parts on sprues and covers several distinct equipment types for diorama building. Visible components include a gantry crane marked 2 t with a hanging hoist, an anvil on a stump, a wheeled air compressor, gas cylinders, a twin-cylinder trolley, a workbench, a vise, barrels, crates, a toolbox and a ladder. Smaller accessories such as shovels, pickaxes, hammers, wrenches, hooks and jack-like lifting tools help fill benches, walls and floor space with scale detail. The mix of larger structures and fine workshop pieces supports layered layouts, from compact repair corners to busier maintenance yards. With 600 minutes of assembly time, the build suits model makers who want to spend time arranging and finishing a service scene around vehicles, figures or depot settings. The 1:35 scale format fits naturally into military and industrial dioramas, where compressors, cylinders and lifting frames can be positioned to suggest ongoing repair, loading or mechanical work.
Model brushes
Italeri Flat Brush 0 Synthetic Hobby Brush
510051223€1.39
Italeri Flat Brush 0 Synthetic is a fine hobby brush built for controlled detail painting, with a slim shape, synthetic bristles and a long handle that supports careful movement across small painted areas. The size 0 format suits narrow edges, tight sections and precise touch-up work where measured paint placement matters more than broad coverage. The synthetic bristle head is paired with a metal ferrule and a dark blue handle, creating a clean, workshop-ready layout for model and craft benches. In use, the flat profile can help define straight edges, pick out small surface sections and apply paint in short, deliberate strokes. The narrow brush head also suits tasks that call for restraint, such as adding fine colour accents, refining borders or working around neighbouring painted details. Assembly kit is listed in the included components, and the product data states an assembly time of 600 minutes. On a model painting table, this brush fits naturally beside paints, palettes and small parts when careful finishing work begins. It also suits creative sessions focused on detail layers, edge definition and other close-control brush tasks where a compact size 0 brush earns its place.
Model brushes
Italeri Flat Brush 00 Synthetic Paint Brush
510051222€1.19
Italeri Flat Brush 00 Synthetic is a fine paint brush built for detailed hobby work, with a size 00 flat tip that supports careful colour placement on small model sections and narrow painted areas. The synthetic bristles, silver ferrule and long dark blue handle create a focused tool for steady hand movement at the workbench. The flat profile gives a different painting action from a pointed detail brush, making it useful for edging, short straight strokes and measured coverage across tiny raised or recessed parts. The slim handle helps keep the grip light during slow, deliberate brushwork, while the small head keeps the painted area easy to read as colour is applied. A synthetic bristle tip also suits repeated detail sessions where consistent shape and controlled pickup matter across fine finishing steps. On scale models, miniatures and craft projects, this brush fits the moments where broad coverage is too much and a careful pass is needed instead. It can be used for trim lines, cockpit details, panel accents, touch-up work and other small finishing tasks that benefit from a compact flat brush rather than a wider head.
Model brushes
Italeri Flat Brush 000 Synthetic Paintbrush
510051221€1.09
Italeri Flat Brush 000 Synthetic is a fine-detail paintbrush for model making, with a synthetic bristle tip shaped for controlled work on very small painted areas. The size 000 format suits careful line work, edging and touch-ups, while the slim profile keeps the brush easy to guide during close finishing tasks. The long handle and metal ferrule give the brush a familiar hobby-tool layout that supports steady paint application around miniature parts and narrow contours. Synthetic bristles are a practical choice for repeated painting sessions and detailed colour placement where a broader tip would cover too much at once. The product data lists assembly required with an assembly time of 600 minutes and includes an assembly kit. Minimum age 14 Years is stated for this accessory. On a workbench, the brush fits neatly into painting stages that call for accuracy rather than broad coverage, such as refining edges, adding small accents or correcting tight sections after a base coat. It also suits careful finishing passes on scale models and other detailed hobby builds where a compact brush head helps keep paint exactly where it belongs.
Model brushes
Italeri Flat Brush 1 Synthetic Hobby Brush
510051224€1.59
Italeri Flat Brush 1 Synthetic is a hobby brush made for controlled painting on small model surfaces. The flat synthetic bristle shape supports measured paint pickup and guided application, which helps when working along edges, corners and narrow sections that call for a steady hand. In the close-up working range typical of scale modelling, that compact profile gives clear control over where the paint goes and how sharply a painted area is defined. The brush combines a slim handle, a metal ferrule and a fine flat tip suited to detail-focused finishing work. Short strokes can be placed with care on trim lines, panel borders and small colour sections, while the flat edge helps keep coverage even across tight areas. Synthetic bristles are a common choice for hobby painting where consistent shape and clean handling matter during repeated sessions at the workbench. Assembly is required, with an assembly time of 600 minutes. This format fits painting stages such as adding small colour blocks, refining borders after a base coat, or working on compact parts where a broader brush would be less exact. It also suits craft and miniature tasks that rely on neat edges and deliberate brush control rather than wide-area coverage.
Model brushes
Italeri Flat Brush 2 Synthetic Paint Brush
510051225€1.69
Italeri Flat Brush 2 Synthetic brings a precise flat brush format to model and hobby painting, combining synthetic bristles, a slim handle and a metal ferrule in a tool shaped for controlled work on small areas. The narrow brush head supports careful paint placement along edges, defined sections and fine surface details where a broader brush would be less exact. The flat profile changes how paint is applied: the bristle edge can guide short, straight strokes, while the wider face can spread colour across compact panels and narrow bands. Synthetic bristles give the brush a consistent working shape for repeated detail sessions, and the long handle supports a steady grip during slow, deliberate finishing steps. The dark blue handle and silver ferrule create a clean workshop look that matches the focused character of scale-model painting. Assembly is required, with a stated assembly time of 600 minutes. On a hobby bench, this brush fits naturally into painting stages such as edging, touch-up work and filling smaller sections after main colours are laid down. It also suits craft use where controlled brush width matters, especially when working on neat borders, compact motifs or carefully separated colour areas.
Model brushes
Italeri Flat Brush 3 Synthetic Hobby Brush
510051226€1.79
Italeri Flat Brush 3 Synthetic is a hobby brush built for controlled painting work on models and other detailed creative projects. The size 3 format combines a narrow flat tip with synthetic bristles, making it suited to smooth coverage on small sections, straight edges and carefully defined painted areas. In the studio image, the slim blue handle, silver ferrule and short yellow bristles point to a brush shaped for measured, accurate strokes rather than broad coverage. The flat profile helps place paint evenly across raised details, trim sections and compact surface areas where a round tip would create a different edge. Synthetic bristles are a practical choice for hobby painting because they hold their shape consistently and support repeatable results across fine finishing steps. The long handle adds reach and control during bench work, while the metal ferrule secures the bristle head at the point where pressure and direction matter most. Assembly kit is listed in the included components. The stated assembly time is 600 minutes. This brush fits naturally into model painting sessions that move between base coverage, edge work and small corrections on visible parts. It also suits craft tables where careful paint placement matters more than wide-area filling, especially on compact shapes, corners and narrow sections. Age marking: 14 Years.
Model brushes
Italeri Flat Brush 4 Synthetic Paintbrush
510051227€1.99
Italeri Flat Brush 4 Synthetic is a slim hobby paintbrush built for controlled brushwork on models and other detailed creative tasks. The size 4 format, flat bristle shape, light-blue handle, silver metal ferrule, and short yellow bristles create a clear setup for measured paint application, crisp edges, and careful coverage on small sections. The synthetic bristles support repeatable strokes where narrow panels, trim lines, and raised details need more definition than a broader brush can give. Its flat tip suits edging, filling small rectangular areas, and guiding paint into tidy bands rather than loose rounded marks. The long handle adds reach between hand and painted surface, which can help when working around fresh paint or confined model sections. The metal ferrule secures the bristle head and gives the brush a clean transition from handle to tip for steady placement. Within model making, this brush fits naturally into painting sessions that focus on detail parts, touch-ups, and finishing passes after main colour areas are complete. The data lists an assembly kit format, a 14 Years age marking, and an assembly time of 600 minutes, placing it in a hobby context shaped by patient, precise work rather than quick craft use.
Model brushes
Italeri Flat Brush 6 Synthetic Hobby Brush
510051229€2.29
Italeri Flat Brush 6 Synthetic is a hobby brush built for controlled paint application on models, crafts and other detailed creative work. The flat bristle profile supports even coverage across small surfaces, while the synthetic bristles and slim handle create a precise, steady painting tool for careful bench sessions. The close, flat tip helps guide paint along edges, trim sections and compact panels where a round brush can place less defined coverage. A silver ferrule secures the bristle head to the long tapered handle, giving the brush a clear transition point that helps with grip and directional control during slower, more exact strokes. The short bristle length suits measured paint placement rather than broad sweeping coverage, which makes this format useful for touch-ups, defined borders and neat layer work on scale builds. On the workbench, the brush fits naturally into model finishing routines, from painting smaller sections to refining straight lines and surface details. Minimum age is 14 Years. Assembly is required, and the stated assembly time is 600 minutes.
Model brushes
Italeri Flat Brush 8 Synthetic Hobby Brush
510051231€2.89
Italeri Flat Brush 8 Synthetic is a hobby brush shaped for controlled paint application in model-making and other careful finishing work. The flat yellow bristle head, silver ferrule and light blue tapered handle create a compact tool that suits both defined edges and broader painted sections, with the flat tip helping guide straight, even coverage across small surfaces. The synthetic bristles support consistent paint pickup and release, which is useful when working through trim, touch-ups or neat colour blocks on detailed builds. Its short brush head keeps the working end close to the surface, making small corrections easier to judge while painting. The metal ferrule holds the bristle shape in place and connects it firmly to the handle, while the slim handle profile supports a steady grip during slower, more deliberate brush movement. Assembly is stated at 600 minutes. The age marking is 14 Years. On a workbench, this brush fits naturally into painting stages that call for crisp edges, filled panels or careful finishing passes. It can move from base coating small sections to refining visible details, giving model builders a straightforward tool for controlled hand painting.
Model car kit
Italeri Ford Escort Mk.II Model Kit 1:24
510103655€36.99
The Italeri Ford Escort Mk.II model kit in 1:24 scale brings a key car of 1970s rally history to the workbench in a finished length of 16.7 cm. Its squared body design reflects the second-generation Escort launched in 1975, giving the build a distinct period character that reads clearly from the first test fit to the final painted shell. This kit focuses on the Ford Escort Mk.II as a detailed plastic build, making the shaping, finishing and painting stages part of the appeal. The source vehicle evolved from the Escort Mk 1 while retaining proven mechanical foundations, and that heritage gives the replica a strong mix of familiar compact proportions and sharper 1970s styling. The Escort line covered 3 body styles and 5 engine types in full-scale production, adding useful context to the model's place in the wider range. Alongside standard road versions, Ford also developed sport-focused variants, including the RS 1800 created for World Rally Championship competition. With an assembly time of 600 minutes, this kit suits builders who enjoy a longer project with room for careful paint application and motorsport-inspired finishing. Paints are required separately. Once completed, the 16.7 cm model fits naturally into a display of classic road and rally cars while also offering a satisfying build centered on one of Ford's best-known compact performance shapes.
Model car kit
Italeri Ford Escort RS 1800 Mk.II 1:24 Kit
510003650€36.99
The Italeri Ford Escort RS 1800 MK.II Lombard brings a landmark rally car into 1:24 scale with the crisp, angular shape that defined the second-generation Escort. At 16.7 cm long when completed, the model gives the compact competition car enough presence for a shelf, cabinet or motorsport-themed display while keeping the proportions of the original RS 1800 clear. This assembly kit is based on the Ford Escort Mk 2 introduced in 1975, a major evolution of the earlier Escort formula with updated squared styling and the proven mechanical foundation carried over from the Mk 1. Within that line-up, the RS 1800 was the dedicated version developed for rally competition, and the Lombard theme connects the build to the RAC Rally years that shaped the car's reputation. The extra catalogue super decals sheet expands the finishing stage with event markings, sponsor graphics and period-specific visual details that help define the competition look. With a stated assembly time of 600 minutes, the build offers room for careful preparation, painting and decal work across the body and trim. The finished replica suits display alongside other 1:24 motorsport subjects, and it also fits naturally into a focused rally collection built around historic championship cars from the 1970s and early 1980s.
Model car kit
Italeri Ford Transit 1:24 Detailed Model Kit
510003975€36.99
The Italeri Ford Transit 1:24 model kit turns a landmark European light commercial vehicle into a detailed scale build with a strong period identity. Based on the Second Series introduced in 1965, the van brings together the proportions and working layout that made the Transit a familiar sight in everyday transport, from urban deliveries to trade use. The full-size vehicle was defined by a front-mounted engine, a wide track and a low loading floor, and those core features shape the character of this kit. In 1:24 scale, the body captures the practical stance of the Transit line while the build process focuses attention on its commercial design rather than on racing or off-road styling. The subject also carries unusual brand history: Italeri used Ford Transit vehicles to deliver its own scale model kits, linking this release to the company's real transport story as well as to the vehicle itself. The detailed plastic construction gives model builders a solid base for painting and finishing work. On the bench, the kit suits careful assembly sessions where body shape, period proportions and van layout matter as much as the finished display. Once completed, the Ford Transit fits naturally into collections centered on classic European utility vehicles, 1960s road scenes or commercial transport subjects. Age recommendation: 14 Years. Warning! Not suitable for children under 14 years.
Model trucks
Italeri Freightliner FLC 1:24 Truck Model Kit
510003859€59.99
The Italeri Freightliner FLC 1:24 Truck Model Kit brings a classic US long-distance tractor into a detailed scale build, shaped around the Conventional FLC 12064T. At 32.5 cm long when completed, the model has the stretched stance of a highway hauler, with the cab, chassis and sleeper laid out in the proportions that define this Freightliner design. The subject is specified with a 475 HP Cummins diesel engine and a 13 speed Fuller Roadranger transmission, giving the replica a clear technical identity rather than a generic truck outline. The build develops through separate chassis rails, suspension and axle sections, engine and pipework assemblies, interior cab parts, and the sleeper module mounted behind the cab. Interior details such as seats, steering wheel and dashboard are part of the construction, while exterior parts add mirrors, roof lights, bumper elements, vertical side equipment and the conventional front end. The decal sheet contributes grille emblems, stripe graphics, dashboard markings and transport lettering for a more finished road-truck appearance. With 600 minutes assembly time, this kit suits a slower bench session where the frame, cab and sleeper come together step by step. Paints, cement and tools are required separately.
Military figures & accessories
Italeri French Infantry 1798-1805 Model Kit
510006092€10.49
Italeri French Infantry 1798-1805 is a 1:72 scale model kit centred on one of the defining troop types of the Napoleonic Wars. The set draws on the French infantrymen who carried the military operations of the Consulate and the early Empire, bringing post-revolutionary uniform and field equipment into a compact historical build with a strong period identity. The subject matter places the figures in the years when French forces were decisive at Marengo in 1800 and Austerlitz in 1805, giving the finished scene a precise historical frame rather than a generic military theme. The infantry are represented with the Charleville 1777 muzzle-loaded musket, a weapon that helps anchor the set in its era and supports more accurate painting and diorama planning. Young officers with strong confidence in Napoleon are part of the historical context behind the set, which helps shape command scenes, marching formations and battlefield arrangements. On a shelf, in a diorama or across a war gaming layout, the 1:72 scale keeps the set easy to combine with other period miniatures and terrain. The finished figures suit collectors who want a French Napoleonic unit with a clearly defined 1798-1805 timeframe and a visual link to the campaigns that established the early Empire. Warning! Not suitable for children under 14 years.
Military figures & accessories
Italeri French Infantry WW II Model Kit 1:72
510006189€10.99
Italeri French Infantry WW II brings Free French Forces into 1:72 scale with 49 unpainted figures shaped for historical scenes from the Second World War. The assembly kit draws on the return of French units to Allied action in 1944, making it a strong base for dioramas that place infantry, support weapons and casualty evacuation into one coherent battlefield setting. The figure selection reaches beyond standard marching poses. Riflemen, stretcher bearers, a light machine gun position, a bazooka operator, a mortar team and observation roles with binoculars create a broader tactical spread across the set. That mix helps a builder stage movement, covering fire, reconnaissance and medical support rather than repeating a single stance across the whole display. Because the figures are supplied unpainted, the finish can follow campaign-specific uniforms, field gear tones and weathering effects chosen for Normandy or the Italian front. The 600 minute assembly time also points to a hobby build with room for careful cleanup, painting and placement. On a shelf, the set can form a compact historical vignette with layered action and clear role definition between the figures. On a wargaming table, the 1:72 format works smoothly alongside period vehicles, scenery and other military miniatures, helping larger World War II layouts keep a consistent visual scale while adding Free French infantry to the scene.
Model figures
Italeri French Line Infantry 1815 Model Kit 1:72
510006002€10.99
Italeri French Line Infantry 1815 brings a key formation from the Napoleonic era into 1:72 scale, with figures shaped around the look of French line troops at the time of Waterloo. The assembly kit centres on the visual markers named in the historical brief, including the shako introduced in 1806 and the Charleville 1777 musket, so the finished figures carry a recognisable period identity on the shelf or in a battle scene. Across the sprues, the set presents line infantry in a range of combat-ready poses that suit marching lines, firing positions and advancing formations. The briquet infantry shortsword appears alongside the muskets as part of the soldiers' field equipment, adding another authentic detail for painters to pick out. A regiment drummer expands the scene beyond standard riflemen, while the eagle-bearer introduces the unit insignia that often becomes the visual focal point in a diorama. The unassembled format leaves room for careful trimming, painting and arrangement, which is central to the appeal of historical figure modelling. With an assembly time of 600 minutes, the kit supports a longer build that can be approached as a single display project or as the basis for a wider Napoleonic setup. At 14 years and up, it suits model builders who want to stage infantry lines, command details and battlefield movement in a compact 1:72 format.
Model figures
Italeri French Line/Guard Artillery Model Kit
510006018€10.99
Italeri French Line/Guard Artillery brings a Napoleonic artillery unit into 1:72 scale with a build centered on field guns, mounted transport and a full crew. The set combines 2 cannons, 1 waggon, 8 horses and 11 figures, creating the structure for a battlefield scene that shows both firing action and movement across the field. The subject draws on French Line and Guard artillery, with uniforms that reflect horse artillery dress and the characteristic skin cap noted for the gunners. The artillery drivers are represented separately, adding another visual layer to the formation around the guns and transport. The guns are based on the Gribeuval system, a defining artillery pattern of the period, which gives the set a clear historical anchor beyond generic military styling. With 600 minutes of assembly time, the build suits a slower modelling pace where the arrangement of crew, horses and ordnance becomes part of the finished composition. On a shelf, in a cabinet or as part of a wider Napoleonic diorama, the 1:72 scale makes the set easy to combine with other period scenes. Ages 14 Years and up marks the recommended age, and the finished layout can be staged around a firing position, a moving gun team or a prepared artillery line.
Military aeroplane models
Italeri Fw 190 A-8/F Aces Model Kit 1:72
510001490€17.49
Italeri Fw 190 A-8/F Aces is a 1:72 aircraft model kit centered on one of the most recognized Luftwaffe fighters of the Second World War. The compact scale brings the Focke-Wulf silhouette onto the workbench with a clear historical identity, making the finished aircraft easy to place in a display of wartime aviation subjects. The source aircraft entered production in 1944 as the A-8 version and used a BMW 801 D-2 twin-row 14-cylinder radial engine rated at 1,700 hp. For short periods, the injection system could raise output to over 1,900 hp, while maximum speed reached 653 km/h. The airframe was armed with 2 MG 131 machine guns and 4 20 mm MG 151 cannons, details that define the character of the variant represented here. More than 20,000 Fw 190 aircraft were produced from 1941 onward, placing this version within one of the major fighter families of the war. On the bench, that combination of scale, variant identity and technical specification supports a build that rewards careful painting and period-correct finishing. Once assembled, the model sits naturally alongside other 1:72 aircraft subjects, whether arranged as a single display piece or as part of a broader Second World War lineup. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri FW 190 D-9 Aircraft Model Kit 1:72
510001312€15.99
Italeri FW 190 D-9 brings the final long-nose development of the Focke-Wulf fighter into 1:72 scale as a detailed aircraft model kit. The elongated front section reflects the redesign made for the Junkers Jumo 213 12-cylinder engine, giving the finished build the unmistakable Dora profile on the workbench or in a display lineup. The subject draws on one of the most recognized Luftwaffe fighters of World War II, with the D-9 representing a later evolution of the original Fw 190 airframe. More than 20,000 Focke-Wulf fighters were produced from 1941 onward, and this version shows how the established aerodynamic layout was adapted for a different powerplant. The new decals edition supplies markings for 6 versions, supporting different camouflage and identification finishes from 1945. Figure not included. During assembly, the model invites close attention to paint placement, national insignia and unit markings, especially across the nose, fuselage and tail sections shown in the finishing references. On a shelf, in a cabinet or alongside other 1:72 aircraft, the FW 190 D-9 stands out through its stretched nose, late-war camouflage patterns and historically grounded marking choices. Warning! Not suitable for children under 14 years.
Military figures & accessories
Italeri German Paratroopers Model Kit 1:72
510006134€13.99
Italeri German Paratroopers brings a WWII figure subject into 1:72 scale with tropical uniform details that suit dry-terrain dioramas, defensive positions, and infantry-focused display scenes. The assembly kit centers on German paratrooper figures and uses unassembled parts to let each pose take shape through building, finishing, and placement. The set is presented on 3 sprues, a format that helps organize the figures and smaller accessories during preparation and painting. Different soldier poses create scope for varied scene composition, whether the layout calls for advancing infantry, observation roles, or dug-in battlefield positions. Uniform and field gear details support a historical look that works well with rocky ground, trench sections, stone walls, and other WWII scenery elements. The stated assembly time is 600 minutes, giving the build a measured pace for trimming parts, refining joins, and planning paintwork across the full group. The included component is an assembly kit, and the age marking is 14 Years. On a workbench, the 1:72 format keeps the figures manageable for batch painting while still leaving room to pick out helmets, packs, weapons, and straps. In a finished display, the tropical uniform theme pairs naturally with desert and Mediterranean settings, where the group can anchor a larger historical scene or add infantry detail to an existing military collection.
Model tanks
Italeri German Truck 3to. TYPE S Model 1:35
510000216€26.99
Italeri German Truck 3to. TYPE S brings a 1938 standardised transport vehicle into 1:35 scale as an assembly kit with a finished length of 17.1 cm. The shape of the cab, the cargo bed with side panels and the covered rear load area give the model the look of a working truck built for practical hauling duties in a military context. The subject is tied to the designation LKW 3,6-36 S 3t Blitz used by the Wehrmacht, reflecting the wider move toward unified civil transport designs that could be converted for military use. That background gives the build a specific historical frame rather than a generic truck theme. The model centres on the vehicle itself, making it suitable for display on its own or as part of a period diorama with roads, depots or field transport scenes. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the 1:35 format supports careful painting, weathering and finishing work across the cab, chassis area and rear body sections. Once completed, the 17.1 cm truck fits naturally into historic vehicle collections and scale scenes where cargo transport, logistics and support vehicles define the atmosphere. Paints and tools are required separately.
Military aeroplane models
Italeri Grumman Hellcat F6 F-3 Model Kit 1:72
510091213€17.49
The Italeri Grumman Hellcat F6 F-3 model kit in 1:72 scale recreates the U.S. Navy carrier-based fighter that entered service in 1943 and became a major force in the Pacific War. Its compact scale and detailed plastic construction give the aircraft's broad-winged fighter shape a clear presence on the workbench and in a finished display. The full-size Hellcat was developed to replace the Grumman F4F Wildcat and to counter the Japanese Zero, and that background gives this subject a strong place in World War II aviation history. Power came from a 2,000-horsepower Pratt & Whitney R-2800 engine, a defining part of the aircraft's high-speed performance and fleet defence role. The wing armament of six 12.7 mm Browning machine guns shaped its use in air superiority sorties as well as close support and ground attack missions. The Hellcat design also became known for an impressive kill-to-loss ratio, adding further historical weight to the finished aircraft. Ages 14 Years and up marks the recommended age for this build. Once assembled and finished, the model suits display in aviation collections, dioramas, or World War II line-ups centered on carrier operations in the Pacific theatre.
Military aeroplane models
Italeri Harrier GR.3 Falklands War Model Kit
510001401€19.99
Italeri Harrier GR.3 Falklands War brings one of military aviation's most recognisable V/STOL aircraft into 1:72 scale, with a finished model length of 15.3 cm and the compact proportions that suit shelf display, diorama scenes or a focused aircraft collection. The subject is the RAF Harrier GR.3 used during the 1982 Falklands conflict, a version known for close support and ground attack missions. The kit is designed as a detailed assembly model and reflects GR.3-specific equipment rather than a generic Harrier outline. The aircraft configuration includes the nose-mounted laser tracker and integrated electronic countermeasure systems noted for this variant. External stores broaden the historical setup, with underwing weapons and 2 drop tanks that match the aircraft's operational role and extended-range loadout. The included decal sheet covers 6 versions, giving scope for different serials, squadron markings and stencil layouts drawn from period RAF schemes. Assembly is required, with a stated build time of 600 minutes. Cockpit, fuselage, wing and landing gear stages create a build that moves through the aircraft section by section, while the finished markings and stores give the model a strong late-Cold War service look. Age marking: 14 years and over. Paints, cement and tools are required separately.
Military helicopters
Italeri HH-53C Jolly Green Giant Kit 1:72
510091035€27.99
The Italeri HH-53C Jolly Green Giant kit in 1:72 brings a combat search and rescue helicopter to the workbench with the long, purposeful lines of a heavy-lift airframe shaped for demanding missions. Based on the Sikorsky HH-53C, this plastic kit recreates a U.S. Air Force aircraft that entered service in the late 1960s and became closely associated with Vietnam War operations. The subject stands apart through the mission equipment developed for CSAR search and rescue work in combat zones. The HH-53C evolved from the CH-53 Sea Stallion with changes that supported longer reach and tougher operating conditions, including an aerial refueling probe, additional fuel tanks, reinforced armor, and the option to mount extra defensive armament. Another defining element was the upgraded radio fit, used to coordinate with supporting aircraft such as tankers, attack helicopters, and other rescue assets during pilot recovery operations. That combination gives the finished model a distinct operational profile rather than a generic transport-helicopter look. On the bench, the 1:72 scale keeps the build manageable while still leaving room for the aircraft's characteristic external equipment and broad fuselage shape to read clearly. The completed helicopter suits military aviation collections, Vietnam-era lineups, and dioramas centered on rescue or support missions, where the HH-53C's specialized role gives it a strong visual presence.
Model tanks
Italeri HMMWV M966 TOW Carrier Model Kit 1:35
510006598€24.99
Italeri HMMWV M966 TOW Carrier is a 1:35 scale assembly kit that captures the broad stance and military layout of this U.S. Army vehicle in a format built for detailed bench work. The finished model reaches 34.0 cm in length, giving the shape, proportions and roof mounted TOW installation clear visual presence once assembled. The build develops through chassis, interior and body stages, with separate seats, control levers, side structures, clear window parts and exterior fittings adding definition across the vehicle. A turret ring and roof opening support the mounted weapon assembly, while the front end is completed with grille and brush guard details that match the reference vehicle's field configuration. The underbody also carries routed mechanical parts such as exhaust sections and hook details, which help the model read convincingly from low viewing angles as well as from the side. Two marking options are provided for U.S. Army vehicles in Saudi Arabia in 1991, including a desert tan version and a camouflage version with Flat Green 383, Flat Brown 383 and Flat NATO Black references. This kit suits display builds that reward careful painting, decal placement and weathering work across doors, roof panels, bumper areas and body sides. Assembly kit only. Recommended age: 14+
Model helicopters
Italeri HO4S-3 HAS.7 H-19 Helicopter Kit 1:72
510001476€16.79
The Italeri HO4S-3 / HAS.7 / H-19 is a 1:72 scale aircraft model kit built around one of the first tactical transport helicopters developed by Sikorsky. Its front-mounted engine configuration gives the H-19 its unmistakable profile and reflects the layout that helped define this early rotary-wing design in service use. The detailed plastic kit draws on an airframe used for troop and material transport and later adapted for roles such as maritime patrol and medical evacuation. That wider service history gives the finished model strong context beyond a single paint scheme. The set covers 4 versions: Sikorsky HO4S-3, U.S. Coast Guard, GCB St. Petersburg, Florida, 1963; Sikorsky HRS-2, U.S. Marine Corps, HMR-161, Korea, 1953; Westland Whirlwind HAS.7, Royal Navy, 1960; and Sikorsky H-19, ALAT, Algeria, 1958. Rotor details, landing wheels, cabin glazing and the side fuselage layout all contribute to the characteristic look of this period helicopter. Figures are not included. On the bench, the different service markings open up distinct display directions, from high-visibility rescue colours to naval and military finishes. Once completed, the model suits aviation collections that focus on Korean War subjects, Coast Guard aircraft, early helicopter development or post-war naval aviation. This 14 Years+ kit offers a focused build centred on a helicopter with broad international service history. Warning! Not suitable for children under 14 years.
Military figures & accessories
Italeri House Corner Model Kit 1:35 Scale
510006413€9.49
Italeri House Corner is a 1:35 scale assembly kit that brings a ruined urban facade into military and historical dioramas. The structure depicts a damaged house corner with a large open doorway, broken wall sections and exposed brick areas, creating a strong architectural focal point for street scenes, checkpoints or battle settings. The wall treatment combines cracked plaster, red brick texture and decorative stone trim, so painted finishes can shift between worn masonry, dust, soot and age marks with clear surface variation. The multi-story layout adds vertical presence without closing off the scene, while the open sections leave sightlines around figures, vehicles and ground details. A central support structure helps hold the wall halves together and reinforces the cross-section form shown in the build. Assembly is required, and the stated assembly time is 600 minutes. Placed at the edge of a road section, beside a vehicle, or as the backdrop to a figure group, the facade helps frame action without overwhelming the rest of the layout. It also works as a standalone scenery element for display shelves where damaged masonry, broken ledges and open architectural lines add depth to a compact footprint. The set contains the assembly kit.
Military aeroplane models
Italeri Hurricane Mk.I 1:48 Aircraft Model Kit
510002838€33.49
Italeri Hurricane Mk.I 1:48 Aircraft Model Kit brings one of the Royal Air Force's defining early World War II fighters into a focused scale build. The detailed plastic kit centres on the Hawker Hurricane, an aircraft flown extensively during the Battle of Britain, with proportions in 1:48 scale that give the single-engine layout, canopy line and wing shape a strong presence on the bench and on display. The full-size aircraft was powered by a Rolls-Royce Merlin 12-cylinder, liquid-cooled inline engine delivering over 1,000 HP and reaching speeds above 500 km/h. Its armament of 8 Browning machine guns in 7.7 mm calibre made it a heavily armed fighter of its period. This edition also reflects the Hurricane's service with named RAF aces, and the kit provides 6 RAF aces versions for the finished markings: Douglas R.S. Bader, Robert R. Stanford-Tuck, Michael L. Robinson, W.L. Mc Knight, L. John W.C. Simpson and William 'Cherry' Vale. That combination of aircraft history, recognisable wartime form and multiple livery choices gives the build a clear direction at every stage. The finished Hurricane Mk.I fits naturally into WWII aircraft collections, diorama scenes and shelf displays where RAF subjects, Battle of Britain themes and ace-marked variants sit side by side. Warning! Not suitable for children under 14 years.
Model figures
Italeri Imperial Guard Artillery Model Kit 1:72
510006135€10.99
Italeri Imperial Guard Artillery brings a Napoleonic gun crew into 1:72 scale with a build centered on Guard foot artillery, field guns and the disciplined activity around them. The set represents a unit of Regiment d'Artillerie a Pied de la Garde Imperiale and captures the look of artillerymen working the cannon in coordinated positions across an open battlefield scene. The historical reference reaches beyond a generic artillery team. The crew is identified by the high bearskin bonnet issued in 1810, a distinctive uniform detail that sets this formation apart within Napoleon's Imperial Guard. The typical Guard artillery crew comprised 8 men, and that full team is reflected here for a more complete gun position. Separate parts for the artillery pieces and figures support a staged build that can be painted and arranged with attention to pose, spacing and period character. Assembly is required, with an indicated build time of 600 minutes. On a shelf, in a diorama or as part of a wider Napoleonic lineup, the 1:72 scale helps the finished scene sit naturally with other historical miniatures and terrain elements. Cannon crews in loading, aiming or firing arrangements can give a display a stronger sense of sequence and battlefield structure, whether the focus stays on a single gun emplacement or expands into a larger Grande Armée setting.
Model brushes
Italeri IT Round Brush 0/3 Synthetic Brown
510051283€2.99
The Italeri IT Round Brush 0/3 Synthetic brown is built for detail painting where a fine point and controlled paint flow matter most. Its round 0/3 format and synthetic brown bristles suit careful work on small sections, from narrow panel details to tiny painted accents on assembly kit builds. The pointed tip supports accurate placement in recessed areas, along edges and around shaped surfaces that need a steady hand rather than broad coverage. Synthetic bristles offer a consistent brush shape for repeated use in hobby painting, while the metal ferrule keeps the bristle head neatly secured to the handle. The long handle adds reach and balance during slower finishing work, which helps when paint needs to be guided into tight contours or applied in thin lines. Assembly is required for the kit project this brush can be used with, and the stated assembly time is 600 minutes. On the workbench, this brush fits the stages where small corrections, trim colours and final painted details define the finished look. It also suits miniature and figure painting tasks that call for a narrow round tip and measured brush control rather than wide area coverage.
Model tanks
Italeri Italian Tanks & Semoventi Model Kit
510025768€21.99
Italeri Italian Tanks & Semoventi brings WWII Italian armored vehicle design into 1:56 scale with a plastic assembly kit that can be built as an M13/40, M14/41, M40 or M41. The 103-part layout combines a compact footprint with visible military detail, from the bolted armor style of the M-series tanks to the casemate form used on the Semovente version, creating a finished model with a strong period silhouette. The subject matter draws on the Italian M-series vehicles used during the Second World War, including the M13/40 with its 47 mm cannon and the M40 self-propelled gun with a 75 mm howitzer mounted in a casemate. Track sections, hull panels, turret or upper fighting structure parts, and smaller fittings guide the build through the distinct shapes of tank and assault-gun variants. The kit also contains 2 figures, which can add scale reference and extra scene detail once the vehicle is placed on a base or in a display setting. Marking options extend across 4 versions, with decals covering unit insignia, tactical symbols and registration details. With about 600 minutes of assembly time, the build suits a slower bench session where fitting, painting and decal placement can be handled step by step. The finished model works well as a standalone display piece, as part of a WWII collection, or in a diorama that pairs the vehicle with terrain, structures and the included figures. Radio gear, a battery pack, a charger and paints are not part of this kit. Warning! Not suitable for children under 14 years.
Model trucks
Italeri Iveco 190.38 Cowboy Model Kit 1:24
510090767€58.99
The Italeri Iveco 190.38 Cowboy model kit in 1:24 scale brings one of the most recognisable Turbostar road tractors into a focused truck-building project. Its subject is the two-axle 190.38 Cowboy, launched by Iveco in 1983 and remembered for the combination of American-style exhaust pipes, a roof spoiler, and comfort-oriented styling details that set it apart within the range. The full-size Turbostar earned a strong place in the European truck market through its broad use in commercial transport, and by the late 1980s it had become the most widespread industrial vehicle in Italy. That background gives this build a clear historical setting: a road tractor from the era when long-haul truck design balanced working function with a more expressive exterior. The Cowboy version is especially notable within that story, as it remains one of the most sought-after Iveco trucks from the period. In model form, the 1:24 scale gives those signature exterior elements room to stand out during assembly and finishing. On the bench or in a display cabinet, the kit suits collections centered on classic European commercial vehicles and 1980s transport history. The subject also fits diorama scenes built around freight depots, service yards, or highway transport settings where a period road tractor gives the scene a clear time frame.
Model paints
Italeri Iveco S-Way model kit 1:24 scale
510003963€70.99
The Italeri Iveco S-Way model kit brings a current long-haul truck into 1:24 scale, translating the full-size vehicle's bold road presence into a detailed build. Based on the successor to the Iveco Stralis and introduced in 2019, the S-Way is defined by a newly designed cab, a more aerodynamic profile, and a distinctive front-end look that gives the finished model a strong commercial vehicle character. As a detailed plastic kit, this build focuses on the shape and identity of a modern transport truck rather than on a simplified toy-like form. The cab architecture is a central part of that identity, reflecting the ergonomics-led redesign of the original vehicle and giving the model a contemporary silhouette. The subject choice also places the build in a recognisably modern trucking context, since the full-size S-Way was developed for maximum efficiency in long-haul transport applications. Advanced driver assistance systems, digitalisation features, and full connectivity solutions are part of the real vehicle's concept and help define the generation this model represents. On the workbench, the 1:24 scale format gives the truck enough presence for display while still supporting a manageable model-building session. The finished build suits a shelf, desk, or display cabinet where the aerodynamic lines and cab proportions can be seen clearly from multiple angles. Age 14 Years+
Model car kit
Italeri Iveco Turbostar Reefer Truck 1:24
510003964€69.99
The Italeri Iveco Turbostar Reefer Truck in 1:24 captures a commercial vehicle that became a familiar sight on European roads at the end of the 1980s. As a plastic kit, it centres the refrigerated transport configuration, combining the Turbostar cab with an insulated cargo body that reflects the demands of food logistics and long-distance freight work. The full-size Iveco Turbostar earned its place through robustness, reliability and performance, and this scale version draws on that established working role rather than a generic truck theme. Its reefer layout sets it apart within the Turbostar family, showing one of the configurations widely used by transport companies with temperature-controlled loads. The model also reflects the sturdy twin-wheel rear axle arrangement seen on the original vehicle, a key part of the truck's balance between overall size and cargo volume. That combination gives the finished build the look of a hard-working fleet vehicle with a clear transport purpose. On the bench or in a display cabinet, the 1:24 format gives the truck enough presence to show the proportions of the cab and refrigerated box body clearly. Recommended from 14 years, it fits builders who want a classic Italian commercial vehicle subject with a strong period identity and a specialised haulage configuration.
Model tanks
Italeri Jagdpanzer 38(t) Hetzer Model Kit 1:35
510096531€34.49
The Italeri Jagdpanzer 38(t) Hetzer model kit brings a compact World War II tank destroyer into 1:35 scale, combining the vehicle's low silhouette with the visual impact of a closed casemate and a forward-mounted 7.5 cm gun. That combination gives the finished build the tense, purposeful look that made the original Hetzer so hard to spot when camouflaged in the field. Its design traces back to the proven mechanical basis of the Panzerkampfwagen 38(t), a foundation chosen for reliable production and efficient manufacture in the second half of 1943. The original vehicle entered service in the second half of 1944, where its low profile, frontal armor and concentrated firepower made it a highly effective tank destroyer. In model form, those same characteristics create a subject defined by tight proportions, angled armor surfaces and a compact fighting compartment. The detailed plastic kit format keeps the focus on the Hetzer's distinctive structure rather than on oversized dimensions or decorative extras. During assembly, the 1:35 scale layout invites close attention to the relationship between hull, casemate and gun, making the vehicle's design logic easy to read in three dimensions. Once completed, the model fits naturally into military collections, dioramas or display shelves where compact armored vehicles and late-war German subjects take center stage. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri JAS 39 A Gripen Model Kit 1:48 Scale
510002638€28.99
The Italeri 1:48 JAS 39 A Gripen brings the compact lines of Sweden's modern fighter-bomber into a build that balances aircraft character with a manageable 30 cm finished length. In this scale, the canard configuration, swept wing planform and lean fuselage shape come through clearly on the bench and in a finished display. The subject reflects the real aircraft's role in the Swedish Air Force, where the JAS 39 A Gripen is known for high manoeuvrability and an electronics suite designed for all-weather and night-time operations. That background gives the model a strong technical identity while painting and finishing move attention to the jet's panel lines, flying surfaces and external stores. Decals for 2 versions open up alternate marking choices, so the final look can follow different service presentations rather than a single fixed scheme. The stated assembly time of 600 minutes also places this kit in a more involved build category, with enough scope for careful preparation, joining, painting and decal placement. On a workbench, the 1:48 format supports a focused aircraft project that can be spread across several sessions. Once completed, the 30 cm model sits comfortably in a cabinet, on a shelf or alongside other modern aviation subjects while keeping the Gripen's distinctive silhouette easy to read at a glance.
Military aeroplane models
Italeri JAS 39 GRIPEN Aircraft Model Kit 1:72
510001306€14.49
Italeri JAS 39 GRIPEN brings the lines of the Swedish multi-role fighter into a 1:72 aircraft model kit with a finished length of about 200 mm. The compact scale keeps the canard layout, swept wing shape and modern jet profile readable on a shelf while still leaving room for detailed finishing work across the airframe. As an assembly kit, this release focuses on the build itself rather than a ready-made display piece. The unassembled parts show the aircraft broken down into fuselage sections, wings, tail elements, landing gear and external stores, so each stage of construction adds another visible layer to the final aircraft. Decals for 4 versions open up different marking directions, including standard service-style finishes and more distinctive commemorative artwork seen on the supplied sheet. That mix gives the same JAS 39 GRIPEN airframe different visual character depending on the chosen scheme. Assembly takes about 600 minutes, which suits a measured build with time for painting, decal application and final detailing. On the workbench, the 1:72 format fits neatly into longer painting and finishing sessions without demanding much space. Once completed, the 200 mm aircraft sits comfortably in a display case, on a desk or alongside other modern military aviation models in the same scale. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri JAS-39D Gripen 1:72 Twin-Seater Kit
510091216€16.99
Italeri JAS-39D Gripen brings the Swedish twin-seat multirole fighter into 1:72 scale as a detailed plastic kit, combining a compact footprint with the sharp lines of a late-1990s combat aircraft. The JAS-39D version was developed from the single-seat Gripen to support advanced pilot training while retaining the strong flight performance associated with the type. The real aircraft paired an innovative aerodynamic design with excellent maneuverability, and that distinctive layout gives the finished model a purposeful modern jet profile. In service, the two-seat variant added operational flexibility beyond training, with roles that also included reconnaissance and ground attack. The full-size aircraft reached a maximum speed of Mach 2.0, a figure that underlines the high-performance character represented by this scale build. The contrast with the earlier Saab 37 Viggen also places the Gripen in a clear generation of newer Swedish combat aviation. On a workbench, the 1:72 format supports a focused aircraft build that does not demand a large display area once complete. In a collection of military aircraft, the twin cockpit and modern canard-delta configuration help the JAS-39D Gripen stand apart from more conventional fighter shapes. The age marking is 14 years and up.
Military figures & accessories
Italeri Jerrycans 1:35 WWII Ger./US Kit
510000402€9.49
Italeri Jerrycans 1:35 WWII Ger./US is a small assembly kit built to add focused stowage detail to military models and diorama scenes. The 1:35 scale format fits naturally alongside vehicles, cargo areas and field layouts, while the mix of German and US can styles gives scenes a broader WWII supply character. The set is supplied as an assembly kit with unbuilt parts on sprues, making clipping, cleanup and painting part of the finished result. Visible can details include molded caps, carry handles, embossed X-pattern faces and raised markings such as USA and 20L, all of which help the accessories read clearly once placed on a vehicle, beside equipment or in a depot setting. Image material also shows both loose cans and grouped storage formats, so the finished pieces can be positioned upright, laid flat or arranged in holders to vary the look of a loadout. The stated assembly time is 600 minutes. Minimum age: 14 Years. Placed on a truck bed, beside an armored vehicle or across a supply point in a diorama, the set adds the kind of compact cargo detail that makes a static scene feel more complete. It also works as a finishing layer for builders refining parked vehicles, workshop corners or battlefield resupply layouts with small-scale accessories rather than major structural changes.
Model tanks
Italeri JS-2 Stalin Tank Model Kit 1:56 Scale
510025764€21.99
The Italeri JS-2 Stalin brings one of the Soviet Union's most formidable World War II heavy tanks into a 1:56 scale build with a finished length of 17.7 cm. Its long 122 mm cannon, centrally mounted turret and distinctive heavy-tank profile give the model a strong presence whether it stands in a display line or takes its place in a tabletop force. This assembly kit is based on the vehicle developed in 1943 to replace the KV tanks and to answer heavily armoured German designs such as the Tiger and Panther. The original JS-2 combined a cast steel hull, heavy armour and a 12-cylinder diesel engine with over 600 HP in a 46 ton chassis, and those defining features shape the look of the finished miniature. The kit contains 77 parts and requires assembly, with an indicated assembly time of 600 minutes. Decals for 5 versions open up different historical finishing routes, including Soviet and Polish marking options shown on the sheet. The completed model suits painting, weathering and historical vehicle line-ups, and it also fits naturally into WWII tabletop gaming at 1:56 scale. Assembly kit, paints, cement and tools are required separately. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri JU-87 B2 Stuka Aircraft Model Kit 1:72
510001292€15.99
Italeri JU-87 B2 Stuka is a 1:72 aircraft model kit that recreates one of the most recognizable dive bombers of the Second World War in a compact 15.4 cm format. The assembly kit focuses on the lines of the Ju-87 B2/R2 airframe, with propeller, fixed landing gear, wing assemblies and cockpit sections that come together as a detailed scale build for the workbench and display shelf. The kit supports more than one finishing route through its B2 and R2 configuration options, and the instruction sequence shows alternative parts for selected versions. A canopy-open option changes the final presentation and keeps the cockpit area in view. Decals for 4 versions expand the historical range further, covering aircraft from Libya in January 1942, France in August 1940, Crete in May 1941 and Greece in December 1940. The marking sheet and paint guides help shape each scheme through unit codes, insignia and theatre-specific camouflage references. With a stated assembly time of 600 minutes, this model suits a slower, step-by-step build that moves through construction, painting and decal placement in clear stages. The 14 Years age marking fits the fine parts, version choices and finishing work involved. On a shelf, desk or in a wider 1:72 aircraft lineup, the completed Stuka brings a historically specific military aviation subject into view with multiple documented liveries to choose from.
Military aeroplane models
Italeri Ju-87G-2 Kanonenvogel Aircraft Kit 1:72
510001466€15.99
The Italeri Ju-87G-2 Kanonenvogel brings one of the most recognizable late-war Stuka variants into 1:72 scale as a detailed plastic aircraft kit. Its gull wing layout, fixed landing gear and underwing 37 mm Flak 18 cannon pods give the finished model the unmistakable profile of the anti-tank version developed for operations against armored vehicles on the Eastern Front after 1943. This G-2 configuration is based on the refined airframe with greater wing surface derived from the earlier D-5 version, which gives the model a specific place within the Ju-87 development line. The kit contains 1 model and supports a focused build with assembly, painting and finishing as the core of the experience. A super decals sheet for 4 versions opens up different historical marking choices, including aircraft linked to Schlachtgeschwader units and the well-known pilot Hans Ulrich Rudel. Paints, cement and tools are required separately. Across the workbench, the 600-minute assembly time allows room for careful dry fitting, camouflage painting and decal placement. Once completed, the 1:72 aircraft suits display alongside other World War II aviation models, where the cannon-armed wing pods, angular wing shape and period markings give the Ju-87G-2 a strong historical presence.
Military aeroplane models
Italeri Junker Ju-87B Stuka Model Kit 1:72
510072010€30.99
The Italeri Junker Ju-87B Stuka Model Kit 1:72 brings a landmark military aircraft into a compact build with the distinctive inverted gull wings and fixed landing gear that made the Ju 87 instantly recognisable in flight and on the ground. As an assembly kit, it turns the aircraft's sharp dive-bomber profile into a hands-on project with painting, trimming and finishing built into the process. The Ju 87B was a 2-seat dive-bomber and ground-attack aircraft, and this set draws on that specific configuration rather than a generic warplane outline. Historical context in the source data places the first flight in 1935 and the combat debut in 1936 with the Condor Legion during the Spanish Civil War, giving the model a defined place in aviation history. The aircraft design also featured automatic pull-up dive brakes under both wings, a notable engineering detail of the original machine. In this starter format, the box contents support key modelling steps with decals, 3 x 7 ml acrylic paints, glue, a brush, a precision tweezer, a sprue cutter and double-sided sandpaper. The 600-minute assembly time suits a build approached in stages, whether the focus is careful part cleanup, camouflage painting or applying the markings with a steady finish. On a desk or workbench, the 1:72 scale keeps the project manageable while still leaving room for the Stuka's wing shape, undercarriage layout and period character to stand out.
Military aeroplane models
Italeri Junkers JU-52 3/m Tante JU LH Kit
510100150€35.99
The Italeri Junkers JU-52 3/m Tante JU LH assembly kit brings a classic transport aircraft into 1:72 scale with a finished model length of 26.2 cm. Its distinctive corrugated-metal look, fixed landing gear and multi-engine layout give the build a strong period presence once the airframe is assembled and finished. This kit is designed as a hands-on model project, with an assembly time of 600 minutes and an age recommendation of 14 years and up. The structure invites careful work across fuselage, undercarriage, engines and smaller fitted parts, while the exterior finish adds another layer of aircraft-specific detail. A Super Decals Sheet is included, and the markings cover 4 versions, opening different historical and operator presentations for the same JU-52 3/m base airframe. Visible registration markings and airline or service graphics help shape each version into a distinct display result rather than a single generic finish. On the workbench, the combination of assembly, painting and decal application creates a steady, detailed build rhythm. Once completed, the 1:72 format and 26.2 cm length give the aircraft enough presence for a shelf, cabinet or aviation-themed display alongside other historic aircraft models.
Military aeroplane models
Italeri Junkers JU-87B Stuka 1:48 Model Kit
510002807€39.99
The Italeri Junkers JU-87B Stuka 1:48 model kit brings a defining Battle of Britain aircraft into a build that combines historical character with a clearly recognisable airframe. At 22.9 cm long, the finished model shows the inverted gull wings and fixed landing gear that made the Ju 87 silhouette so distinctive in period photographs and reference collections. This assembly kit is built around a detailed plastic format and includes a super decals sheet for 4 versions, opening several marking paths for the same aircraft type. The set also contains photo-etched parts, which add finer definition to selected details and support a more intricate finish than standard moulded sections alone. The subject itself reflects the Ju 87B as a two-seat dive-bomber and ground-attack aircraft first flown in 1935, with combat use beginning in 1936. Italeri frames this edition around the Battle of Britain 80th Anniversary, linking the model directly to a specific wartime chapter. A stated assembly time of 600 minutes gives the project a measured pace suited to careful painting, decaling, and staged construction. The completed aircraft sits well in a display line with other 1:48 aviation subjects, and the 4 marking versions create room to build a distinct variant within that scale collection. Recommended age: 14 years and up.
Model aircraft
Italeri KC-135 R/FR Stratotanker Model Kit 1:72
510091281€69.99
The Italeri KC-135 R/FR Stratotanker model kit in 1:72 scale brings one of military aviation's defining tanker aircraft into a detailed build with a strong technical identity. Derived from the Boeing 707 airliner, the full-size KC-135 entered service in the late 1950s and became a central refueling aircraft for long-range U.S. Air Force operations. In model form, that history translates into a long, purposeful airframe and a configuration shaped by aerial refueling rather than passenger transport. The subject aircraft is powered by 4 underwing turbofan engines and reaches a maximum speed of more than 930 km/h, details that place the finished build firmly in the jet age. Its refueling system is a key part of the design: the rigid flying boom sits beneath the tail section, while 2 additional underwing pods with flexible hose systems can also be fitted on the real aircraft. The original aircraft can carry nearly 100,000 kg of fuel, a figure that explains its enduring operational role across bomber, fighter and attack aircraft missions. On the bench or in a display cabinet, the 1:72 scale gives the KC-135 R/FR Stratotanker enough presence to show its long wings, engine arrangement and specialized tanker layout clearly. The result suits aviation collections centered on Cold War aircraft, support aviation, or large multi-engine jet subjects. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Kfz. 69 Schwimmwagen Model Kit 1:35
510000313€12.99
The Italeri 1:35 Kfz. 69 Schwimmwagen model kit brings an amphibious military vehicle into a compact display scale with a subject rooted in World War II transport and reconnaissance history. At 10.9 cm when built, the model captures the distinctive proportions of the Schwimmwagen, a design developed by Ferdinand Porsche after the success of the Volkswagen 82 Kubelwagen. The full-size vehicle was created for terrain and mission profiles that demanded more than a standard car could manage. Its light weight of about 1/2 ton helped it keep moving through muddy ground, and its amphibious layout answered the need to cross water during reconnaissance and liaison missions. That background gives the finished 1:35 build a clear technical identity, with the boat-like lower body and compact military form setting it apart from standard wheeled vehicle subjects. The kit also includes 3 figures, opening up more options for staging the completed scene beyond the vehicle alone. On the workbench, the 600-minute assembly time points to a build with room for careful painting, fitting and finishing. Decals for 1 version provide the markings for a defined final appearance, whether the model stands alone in a cabinet or becomes the centrepiece of a small historical diorama.
Model tanks
Italeri King Tiger 1:72 Model Kit Set
510072005€30.99
Italeri King Tiger 1:72 Model Kit Set brings the Sd.Kfz. 182 Panzer VI Ausf. B into a compact build with the visual weight of a late-war heavy tank. The assembly kit centers on the sloped frontal hull, the 8.8 cm KwK 43 L/71 gun and the broad turret profile that defined the original vehicle in service from mid 1944. The real King Tiger used a completely new chassis, carried almost 70 tons and reached 42 km/h with its Mayback V-12 engine, giving the finished model a strong technical story behind its shape. Two turret solutions were used on the full-size tank during production, with the Porsche turret appearing first and the Henschel turret equipping most later units. Both versions carried 80 rounds for the main cannon, a detail that places the design firmly within the heavy armor development of the period. The set contains the assembly kit and the core finishing tools and materials needed to start work, including a decal sheet, 3 x 7 ml main acrylic paints, plastic glue, a brush, a precision tweezer, a sprue cutter and sandpaper. Across a 600 minute build, the small scale invites careful trimming, test fitting and paintwork at the bench. Once completed, the model suits a shelf, diorama base or military collection where the compact 1:72 format leaves room for several vehicles from the same era.
Model tanks
Italeri King Tiger model kit 1:56 with figure
510015765€24.99
The Italeri King Tiger model kit brings the Sd.Kfz. 182 Panzer VI Ausf. B into 1:56 scale with a finished model length of 184 mm and proportions suited to 28 mm military scenes. Its 100% new mould gives this build a fresh tooling base, while the heavy tank silhouette, sloped frontal hull and long 8.8 cm KwK 43 L/71 gun create the unmistakable profile associated with the King Tiger. The source data places this vehicle in German army service from mid 1944 and notes a completely new chassis compared with the Tiger I. It also names the Mayback V-12 engine, the maximum speed of 42 km/h, and the capacity for 80 rounds in the main cannon. Two turret solutions are part of the King Tiger story, with Porsche turret vehicles appearing first and the Henschel turret used on most units produced. Decals for 4 versions give the finished build room for different markings, and the included tank driver adds a crew presence that suits both wargaming tables and static diorama layouts. Easy assembly keeps the project approachable for a focused build session, while the compact 1:56 format makes placement simple in collections, historical displays, and tabletop battle setups. The result is a military vehicle model that carries strong historical character without demanding a large footprint. Warning! Not suitable for children under 14 years.
Model car kit
Italeri Lamborghini Diabolo Model Kit 1:24
510103685€34.99
The Italeri Lamborghini Diabolo model kit in 1:24 scale turns one of the defining super sports cars of the 1990s into a detailed build with a finished length of 18.6 cm. Its low nose, wide stance and sharply cut body surfaces give the completed car a strong display presence that reflects the dramatic proportions of the original Lamborghini design. This detailed plastic kit is built around the character of the Diablo era, a car produced from 1990 to 2001 and developed as the successor to the Miura and Countach. The source vehicle combined a newly developed V12 engine, 5.7 liters of displacement, 4 valves per cylinder and computer controlled multi-point fuel injection to reach 492 HP. Lamborghini set a target of at least 320 kph, and the Diablo answered with a top speed of 325 kph and 0 to 100 in 4.5 seconds. Those performance figures give the model a clear historical context and make the finished build more than a generic coupe on the shelf. The assembly kit suits longer workbench sessions, with a stated assembly time of 600 minutes and separately required paints chosen to bring out the bodywork and cabin details. Once completed, the model fits naturally into a display case, on a desk or alongside other 1:24 scale road cars, where the wedge-shaped silhouette and detailed markings stand out from every angle.
Model car kit
Italeri Lamborghini Gallardo Model Kit 1:24
510003673€40.99
The Italeri Lamborghini Gallardo model kit in 1:24 scale brings one of the defining supercar shapes of the 2000s into a detailed build centered on sharp body lines and a low, road-hugging stance. Based on the Lamborghini introduced in 2003, the replica turns a landmark design from Sant'Agata Bolognese into a compact format that holds its presence on a shelf, desk, or in a display cabinet. The full-size Gallardo became a benchmark for sports car design and style, with bodywork created by Giorgetto Giugiaro's Italdesign and performance shaped around a 5.0-liter V10 engine delivering over 500 hp. Later versions increased displacement to 520 hp, while top speed reached over 300 km/h in the original car's segment. That background gives the model extra depth during the build, because the proportions, roofline, and wedge-shaped profile connect directly to a car known for acceleration, handling, and a wide range of versions and customizations. More than 14,000 units of the original Gallardo were produced. With a recommended age of 14 years and an assembly time stated in minutes in the product data, the kit fits focused building sessions where careful placement and steady progress matter. The finished replica works well as a display piece for sports car collections, modern supercar themes, or a workbench project built around an instantly recognizable Lamborghini form.
Model car kit
Italeri Lamborghini Murciélago Model Kit 1:24
510003672€40.99
The Italeri Lamborghini Murciélago model kit in 1:24 brings one of the defining supercars of the 2002 to 2010 period into a hands-on scale build. Its sharply cut bodywork, low stance and unmistakably aggressive silhouette give the finished replica a strong presence on a shelf, desk or in a model car collection. The original Lamborghini Murciélago was built in Sant'Agata Bolognese and powered by a 6.2-liter V12 engine producing over 580 hp. That performance background shapes the appeal of this kit, linking the build to a road car capable of 0 to 100 km/h in about 3.8 seconds and a top speed above 330 km/h. The source car also combined advanced onboard electronics with all-wheel drive, details that help explain its reputation for composed handling. Inside, the sporty cabin layout and the use of premium materials gave the Murciélago a focused grand touring character that set it apart from softer supercar designs. This 1:24 scale format suits builders aged 14 years and up who enjoy recreating real automotive icons with paint and assembly work. Once completed, the model fits naturally into display lineups centered on Italian exotics, V12 road cars or modern performance legends. Warning! Not suitable for children under 14 years.
Model car kit
Italeri Lancia Delta Integrale 16v Safari
510104720€194.99
Italeri presents the Lancia Delta Integrale 16v Safari as a 1:12 plastic kit shaped around one of rallying's most recognisable competition cars. The larger scale gives the bodywork, stance and event-specific setup more visual presence on the workbench, while the detailed kit format keeps the focus on the car's distinctive Safari Rally configuration. The subject comes from the Lancia Delta line that built a formidable record in world rally competition during the late 1980s and early 1990s. This version connects specifically to the Safari Rally campaigns of 1988 and 1989, when the Delta secured major victories in one of the toughest events in motorsport. The source vehicle was prepared with dedicated suspension, stronger shock absorbers and additional protective components to cope with punishing routes across African terrain. That competition context gives the model a clear technical identity beyond its road-car origins. On the bench, the 1:12 format supports a build where the rally car's shape and competition character remain central from the first stages to the finished display. The 14 years age marking places it in a range suited to more advanced model making, with enough scale to appreciate the details that define this Safari specification and its place in Lancia rally history. Warning! Not suitable for children under 14 years.
Model car kit
Italeri Lancia Fulvia HF Rally Model 1:24
510003670€49.99
The Italeri Lancia Fulvia HF Rally Monte 1972 brings one of the defining competition coupés of its era into a 1:24 scale format with a strong period identity. Based on the Fulvia HF, the car became closely linked with international rally success, and this version reflects the Monte Carlo 1972 theme that sits at the heart of its motorsport story. The full-size 1.6 HF 'Fanalone' stood out through its oversized front headlights, a detail that gave the car its unmistakable face and helped distinguish it from the standard Fulvia road version. Behind that shape sat a longitudinal front-mounted 1,584 cc V4 engine, a layout tied to the character of the original competition car. The Fulvia HF went on to collect numerous rally victories, culminating in Lancia's 1972 International Championship for Manufacturers, and that historic context gives the finished scale car a clear place in classic rally history. On the workbench, the model offers a focused build centered on a celebrated Italian design from the late 1960s and early 1970s. Once completed, it suits display alongside other historic competition cars, where the compact coupé proportions, rally identity and signature Fanalone front end stand out at a glance.
Model car kit
Italeri Lancia LC2 1:24 Racing Model Kit
510003641€37.99
The Italeri Lancia LC2 1:24 model kit brings one of the best known endurance racers of the early 1980s into a detailed build with a finished length of 20.0 cm. Its low aerodynamic body, enclosed cockpit canopy and tall rear wing give the replica the same unmistakable silhouette that made the LC2 stand out in World Sport Prototype competition. Lancia developed the LC2 for the 1983 racing season, and the subject combines Italian chassis design with a Ferrari V8 twin turbo engine prepared by Abarth. The real car used a 2,599 cm3 engine, later increased to 3,014 cm3, which gives the model strong historical context as well as visual character around the rear bodywork and intake layout. The kit is designed as an assembly build and lists 600 minutes assembly time, making it a substantial project rather than a quick snap-together. A super decals sheet adds the period racing graphics, sponsor markings, driver names and numbers needed to finish the body in authentic competition style. On the bench, the 1:24 scale gives enough presence for careful painting and decal placement while keeping the model manageable for display after completion. Color instructions guide the finishing stage, and paints are required separately.
Military ship models
Italeri LCVP with US Infantry Model Kit 1:35
510006524€62.99
Italeri LCVP with US Infantry brings a landmark amphibious landing craft into 1:35 scale with the massed presence that defines a beach assault scene. The 31.4 cm hull gives the build a broad footprint for troop placement, while the LCVP form developed by Higgins Industries is paired here with U.S. Infantry figures for a focused D-Day Series subject. The full-size LCVP was designed to shuttle between larger ships and the shore, carrying personnel, light vehicles and supplies during amphibious operations in Europe and the Pacific. That role gives this model kit a clear working identity, with the open central bay, high side walls and loading layout all tied to transport duty rather than a conventional naval silhouette. The set also draws on the craft's long service history, as the LCVP remained in use after the Second World War and later saw action in Korea and Indochina. New soldier moulds add fresh tooling to the infantry contingent, and the decal sheet expands finishing options with markings for 8 versions. On the bench, the combination of landing craft and infantry supports a range of display directions, from a tightly packed embarkation scene to a shoreline approach with crew and troops distributed across the deck. The 600 minute assembly time suits a build that can be painted, marked and staged as a detailed military diorama centerpiece.
Military aeroplane models
Italeri Lockheed F-35A Lighting II Model Kit
510002506€109.99
Italeri presents the Lockheed F-35A Lighting II as a 1:32 assembly kit that turns the lines of a fifth-generation combat aircraft into a large-format model with real visual impact. With an assembled length of 49.0 cm, the finished aircraft gives the stealth-style fuselage, trapezoidal wings and twin outward-canted vertical stabilizers enough scale to stand out clearly on a shelf or in a collection. The subject represents the F-35A conventional takeoff and landing variant from the Joint Strike Fighter program. As a single-seat, single-engine multirole aircraft, it combines air superiority, close air support and ground attack roles in one airframe, giving the build a strong contemporary aviation focus. The new mould tooling supports sharply defined surface detail across the fuselage and flying surfaces, while photo-etched parts introduce finer elements that reward careful handling during construction. The decal sheet covers 6 versions and includes service markings, rescue arrows, warning stencils, serials, insignia and ordnance markings for a more specific finished appearance. This assembly project is marked for ages 14+ and lists an assembly time of 600 minutes, making it a substantial bench build rather than a quick weekend task. Painting, masking and final decal placement shape much of the finished character, especially around the canopy, panel areas and external markings. The result is a detailed modern jet model that suits display alongside other military aircraft in 1:32 scale.
Model tools
Italeri Locking Tweezers Fine Serrated 160 mm
510050821€12.49
Italeri Fine Serrated Locking Tweezers 160 mm bring precise control to detailed modelmaking tasks where small parts need steady handling. The long, slim metal form and pointed working ends make it easier to reach confined areas, align delicate components and hold them in place during careful assembly. The fine serrated gripping surfaces add traction at the tips, which helps when lifting tiny pieces, adjusting narrow parts or positioning decals and other miniature details. A locking mechanism keeps the tweezers closed after pressure is applied, so the grip stays consistent while a part is moved into place. At 160 mm, the tool offers extra reach across larger assemblies while still allowing close, accurate handling at the bench. The central grip section supports controlled finger placement during slow, exact work on kits and hobby builds. Used during model assembly, touch-up placement or detail fitting, these tweezers suit tasks where direct finger contact would block the view or disturb alignment. The 14 Years age marking is stated in the data. Assembly is required, and the data lists an assembly time of 600 minutes.
Model tools
Italeri Long Nose Plier Precision Hobby Tool
510050812€11.49
Italeri Long Nose Plier brings precise control to detailed model and hobby work with long, tapered jaws that reach into narrow spaces and handle small components with a steady grip. The slim plier format suits bench tasks where exact placement, careful bending and clean positioning matter, whether working around tight assemblies or adjusting fine parts before final fitting. The dark metal head and curved handles create a focused hand tool layout that supports controlled pressure during close work. Its needle style jaw shape helps when guiding thin material, holding delicate pieces in place or retrieving parts from confined areas that broader tools cannot reach easily. The single tool format keeps the setup straightforward for targeted workshop use, and the compact profile fits naturally alongside cutters, files and other model making essentials. Assembly kit is listed among the included components. On a hobby bench, Italeri Long Nose Plier suits tasks such as aligning small model parts, bending fine wire and managing detail work around narrow joins. The 14 Years marking is stated in the product data. Assembly time is listed as 600 minutes.
Model tanks
Italeri LVT-4 Water Buffalo Model Kit 1:35
510006752€36.99
The Italeri LVT-4 Water Buffalo model kit in 1:35 scale brings one of the best-known amphibious tracked vehicles of the Second World War to the workbench as a detailed replica with a broad, open hull and the characteristic rear loading ramp. The plastic assembly kit reflects the LVT-4 redesign that moved the engine to a central position, freeing the rear section for faster loading and unloading during landing operations. That layout gives the finished model a distinctive silhouette, with the troop compartment, ramp structure and tracked lower hull all clearly defined. The kit also supports version-specific finishing through 5 marking options, allowing different wartime appearances drawn from British Army, U.S. Army and U.S. Marine Corps service. Photo-etched parts contribute finer detail where thinner metal components matter visually, while the gluable rubber tracks introduce a different material treatment around the suspension and sprockets. Interior assembly options for folded seats or lowered seats add another layer of display choice inside the hull. Across a build time of 600 minutes, the model moves through hull construction, running gear, interior fittings, weapon mounts and final markings, creating a project with clear stages and visible progress. On the finished shelf, the LVT-4 Water Buffalo stands out in diorama scenes based on beach landings, muddy river crossings or late-war transport settings where its amphibious role and rear ramp are central to the vehicle's identity. Warning! Not suitable for children under 14 years.
Model tanks
Italeri M-1 Abrams 1:72 Model Set Tank Kit
510072004€30.99
The Italeri M-1 Abrams 1:72 Model Set brings the lines of a modern main battle tank into a compact scale build, combining the long main gun, armored hull and tracked suspension in a format that fits neatly on a work surface. As a detailed plastic kit, it turns the M1 Abrams into a hands-on modelling project with painting and finishing steps that shape the final look as much as the assembly itself. The real vehicle entered service at the beginning of the 1980s to replace the ageing M-60, and this set draws on that later-generation tank design with its low, broad hull and distinctive turret profile. The Abrams is known for heavy armor, a multifuel turbine engine and a computerized fire control system, all of which inform the model's modern military character. The set also includes a decal sheet, acrylic paints, glue for plastic, a brush, a precision tweezer, doublesided sandpaper and a sprue cutter, so the core tools and finishing materials are already part of the box. Assembly is required and the stated build time is 600 minutes. On the bench, the 1:72 scale keeps the project manageable while still leaving room for careful paint application on the hull, turret and running gear. The included decals support sharper finishing touches, and the supplied tools help with trimming, smoothing and placing smaller parts during the build. Once completed, the Abrams works well as a shelf display, a military model collection piece or a focused weekend hobby project built in stages.
Model tanks
Italeri M-109/A2-A3G Howitzer Model Kit 1:35
510006589€34.99
Italeri M-109/A2-A3G Howitzer is a 1:35 plastic assembly kit that brings the profile of a tracked self-propelled artillery vehicle onto the workbench with a long main gun, turreted hull and detailed running gear. The finished build carries the look of a field vehicle in service, with camouflage, markings and track detail shaping a strong shelf presence. The kit includes an assembly set and a decal sheet for 6 versions, opening up different finishing directions across national and unit markings. Two gluable rubber track options, T-136 Chevron and NATO NM-116, add a specific choice at the running gear stage and help match the selected version more closely. The subject is presented as an M109 A2/A3/G configuration, giving the build a defined military vehicle identity rather than a generic armored chassis. Assembly is required, and the stated build time is 600 minutes. Paints, cement and tools are required separately. During the build, the turret, barrel and suspension details create a steady sequence of fitting and finishing steps that suit model makers who enjoy military subjects in 1:35 scale. Once painted and decaled, the howitzer works well in a display cabinet, on a shelf, or as part of a larger armored vehicle collection with other land systems from the same scale range.
Model tanks
Italeri M-47 Patton 1:35 Tank Model Kit
510006763€30.99
The Italeri M-47 Patton 1:35 tank model kit brings a Cold War armored vehicle into a detailed scale build, combining the distinctive shape of the U.S. medium tank with markings for several NATO operators. The finished subject reflects the full-size vehicle's turret-mounted 90 mm M3 gun and the broad stance that made the M-47 a familiar sight in armored units of the 1950s. The original tank weighed about 46 tons and used a Continental 12-cylinder V-type air-cooled engine with 810 hp, reaching a top speed of 45 km/h; those background details give the model strong historical context during assembly and finishing. Service use extended beyond the United States to multiple NATO armies, and the included decal choices support that wider operational history. Glueable rubber tracks help reproduce the look of the running gear with a material choice suited to the track layout, while the added figure gives the turret area a stronger sense of scale. New parts further shape this edition of the kit and support a more specific representation of the M-47 Patton. On a shelf, in a diorama, or as part of a wider armored vehicle collection, the 1:35 scale format sits well alongside other military builds of the same scale. Recommended age: 14 years and up. Warning! Not suitable for children under 14 years.
Model trucks
Italeri M-B Actros MP4 Show GigaSpace 1:24
510003935€74.99
The Italeri 1:24 M-B Actros MP4 Show GigaSpace brings the modern Mercedes-Benz heavy truck range into a detailed scale build with a finished model length of 269 mm and a tall long-haul cab profile that gives the completed tractor unit a commanding display presence. Its ShowTruck character comes through in the combination of updated chromed parts and a large decal set created for bold custom graphics. The Actros range entered service in 1995, and this kit represents the New Actros generation introduced in 2012 with the advanced cab design that shaped the later Mercedes-Benz long-distance fleet. The GigaSpace configuration reflects the high-roof version developed for 2-driver long-haul use, which gives the model its distinctive upper cab height and broad side surfaces for graphics. The decal sheet supports that format with WOLF-themed artwork, ACTROS lettering, Mercedes-Benz emblems, hazard chevrons, speed limit signs and a wide selection of regional number plates. Those finishing elements allow the build to lean into the visual language of European show trucks rather than a plain fleet specification. Across a 600 minute assembly process, the kit suits careful painting, trim work and decal alignment, whether the build heads toward a clean road-going finish or a more dramatic custom display piece. On a shelf, in a cabinet or alongside other 1:24 commercial vehicle models, the high-roof silhouette, chrome accents and graphic treatment give the truck a strong visual identity. Paints are required separately. Warning! Not suitable for children under 14 years.
Military ship models
Italeri M.A.S. 568 4a Torpedoboot 1:35 Kit
510005626€114.99
Italeri M.A.S. 568 4a Torpedoboot 1:35 Kit captures the lean profile of an Italian motor torpedo boat in a format that gives the hull, deck fittings and crew real presence on the bench and in a finished display. The 1:35 scale gives the compact naval craft enough size for the cabin structure, railings and deck areas to read clearly once assembled. This assembly kit is based on the M.A.S. 500 class, the fast gasoline-engine boats used during the Second World War as motor torpedo craft and anti-submarine platforms for depth charge dropping. The source subject is described with a top speed of 40 knots and armament of 2 450 mm torpedoes, giving the model a strong historical identity rooted in small, rapid naval warfare. Decal options shown for M.A.S. 563 classe 500 3a Serie and M.A.S. 568 classe 500 4a Serie add alternate finishing routes within the same class. The included crew helps turn the finished boat into a more complete scene rather than a standalone vessel. With 600 minutes stated for assembly, the build suits model makers who enjoy taking time over painting, markings and deck detail. Paints, cement and tools are required separately. Once completed, the boat fits naturally into a naval collection, a maritime diorama or a shelf display that focuses on fast patrol and torpedo craft from the Second World War.
Model tanks
Italeri M113A1 APC Model Kit 1:35 Scale
510006753€29.49
The Italeri M113A1 in 1:35 scale brings a well-known armoured personnel carrier into a detailed plastic kit format, combining military presence with a build that focuses on the vehicle's distinctive tracked layout and compact transport profile. Developed for troop transport and close support, the original M113A1 became a familiar sight in service use, and that background gives the finished model a strong historical identity on the shelf. This assembly kit is built around the M113A1 APC configuration and uses link and length tracks to reproduce the characteristic track run with more defined sections around the suspension. The new decals sheet covers 6 versions, opening different marking options for the final finish. Figures are not included, so the focus stays on the vehicle itself and its exterior details. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the 1:35 scale format gives enough presence for careful painting, weathering and marking placement without overwhelming the build space. Once completed, the M113A1 suits a military display, a Vietnam-era vehicle lineup, or a broader collection of tracked armoured vehicles where its low silhouette and recognisable form stand out clearly. Warning! Not suitable for children under 14 years.
Model tanks
Italeri M1A1 Abrams Model Kit 1:35 Scale
510035108€37.99
The Italeri M1A1 Abrams model kit brings the shape of a modern American main battle tank into 1:35 scale, with the broad armored hull, prominent turret and long cannon creating a strong display presence once assembled. As a detailed plastic kit, it centers the build on the distinctive layout that made the Abrams a defining armored vehicle from the beginning of the 1980s. The full-size M1 Abrams was developed as a 3rd generation main battle tank and became the backbone of United States Army and United States Marine Corps armored divisions. Its design paired heavy armor with a powerful multifuel turbine engine and a computerized fire control system housed within the armor-plated hull. The vehicle also used a separate, heavily protected ammunition storage area inside the main body, a layout created to improve crew protection compared with earlier tanks such as the ageing M-60. The original 105 mm main gun was later updated to a 120 mm smooth-bore cannon, adding another layer of historical context for the M1A1 subject. On the workbench, the kit suits careful assembly, painting and finishing sessions, while the completed tank fits naturally into military vehicle displays or diorama scenes. Builders can focus on camouflage, markings and track treatment to give the Abrams a field-ready look that reflects its operational use in conflicts including the Middle East and Afghanistan. Warning! Not suitable for children under 14 years.
Model tanks
Italeri M24 Chaffee tank kit 1:35 scale
510006761€30.99
The Italeri M24 Chaffee tank kit in 1:35 scale brings a key American light tank from 1944 into a format that rewards careful assembly, painting and finishing. Its subject reflects the M24 Chaffee configuration developed to replace the earlier M3/M5 Stuart, with the lower, broader layout and turreted 75 mm armament that gave this vehicle a distinct battlefield role. The build centres on the M6 75 mm cannon, represented here with a metal gun barrel, while the full-size tank carried 48 rounds and paired its main armament with two 12.7 mm Browning machine guns. The running gear can be finished with gluable rubber tracks or with link-and-length tracks, allowing different approaches to track detail and assembly style. Decals for 5 versions expand the finishing options across multiple markings, making it possible to present the same vehicle type in different service appearances. The detailed kit format keeps the focus on the tank's silhouette, turret proportions and tracked stance rather than on simplified toy-like handling. On the workbench, the 1:35 scale lends itself to brush painting, airbrushed camouflage, washes and dry-brushed highlights across the hull and turret. Once completed, the M24 Chaffee suits a WWII vehicle lineup, a diorama with urban or reconnaissance themes, or a standalone armour display that highlights one of the conflict's most effective light tank designs. Warning! Not suitable for children under 14 years.
Model tanks
Italeri M32 Recovery Vehicle Model Kit 1:35
510006547€29.99
Italeri M32 Recovery Vehicle is a 1:35 scale assembly kit that captures the distinctive form of the U.S. Army armored recovery vehicle developed from the Sherman A-4 chassis. At 16.7 cm long, the finished model brings the tall superstructure, recovery boom and tracked layout into a compact format that still reads clearly on a shelf, in a cabinet or as part of a larger military scene. The subject stands apart from a standard tank because the main armament and turret were replaced by equipment for lifting, towing and field repair. That role gives the build a different silhouette, with the recovery structure and onboard workshop character shaping the whole vehicle. Italeri also equips the kit with new gluable tracks, adding a defined construction stage around the running gear. Decals for 3 versions expand the finishing options with period markings tied to wartime service in Europe, including named vehicles and unit identifiers shown on the sheet. With a 600-minute assembly time and a 14+ age marking, the kit suits builders looking for a longer project centered on military engineering rather than frontline firepower. The completed M32 fits naturally into Second World War and Korean War themed collections, and its recovery role also gives diorama builders a strong focal point for maintenance, towing or battlefield support scenes.
Model tanks
Italeri M36B1 1:35 Tank Destroyer Model Kit
510096538€31.99
The Italeri M36B1 brings a late-war American tank destroyer into 1:35 scale with the combination of a Sherman M4A3 hull, an open-topped turret and the prominent 90 mm M3 gun. That layout gives the finished build the purposeful stance of a vehicle developed during the Second World War to answer heavily armored German tanks such as the Panther and Tiger. This detailed plastic kit represents the M36B1 variant, which adapted available Sherman M4A3 hulls to support American production capacity while carrying the stronger gun armament associated with the M36 series. The 90 mm M3 gun replaced the earlier 76 mm weapon used on the M10, changing both the vehicle's combat role and the visual balance of the upper structure. The open turret design, used on American tank destroyers, increased battlefield visibility and gives the model a fighting compartment that remains more exposed during painting and finishing. The shared hull lineage with the M10 also places the M36B1 within a clear development path of U.S. armored vehicles. On the workbench, the mix of hull, turret and gun details creates a military modeling subject with strong historical identity. Once completed, the M36B1 suits diorama scenes, shelf display and collections focused on World War II armor or postwar service vehicles, reflecting the type's long operational use in several armies and conflicts. Warning! Not suitable for children under 14 years.
Model tanks
Italeri M3A1 Half Track 1:72 Easy Kit Set
510107509€17.99
Italeri M3A1 Half Track 1:72 Easy Kit Set brings the distinctive wheel-and-track layout of this military transport into a compact assembly format, with 2 models in one box and each finished vehicle measuring 8.3 cm. The paired build creates a convincing convoy presence on a diorama road, a wargame table or a display shelf, where the open rear body and angular armored lines stand out clearly at this scale. Each model uses 14 parts, giving the construction a focused structure that keeps attention on the shape of the M3A1 rather than on a high part count. The finished form combines front wheels with rear tracks, a layout that defines the half-track silhouette and gives the model its recognisable stance. Marking options extend the visual range with 4 versions, including 1944 schemes shown for U.S., British, Free French and Brazilian service. The decal sheet adds stars, roundels, serials and tactical markings that change the identity of the same base vehicle across different historical settings. This set suits builders who want two matching vehicles for formation scenes, transport columns or battlefield support layouts. Assembly is required and the stated build time is 600 minutes. The 14+ age marking places the set in a hobby context shaped around careful construction, painting and finishing work.
Model tanks
Italeri M4 Sherman model kit 1:72 scale tank
510007003€13.49
The Italeri M4 Sherman model kit brings a well-known World War II tank into a compact 1:72 scale format that keeps the build manageable while still showing the vehicle's distinctive turret, hull and tracked layout. With a finished model length of 8.2 cm, the completed tank fits naturally into display cabinets, dioramas or tabletop scenes where small-scale armour needs clear shape and presence. Separate sprues organise the construction into visible sections, including dark grey track runs and running gear parts alongside olive drab hull components and exterior fittings. That layout supports a more deliberate assembly process, because the undercarriage, upper structure and detail pieces can be prepared and finished in stages. The decal sheet provides markings for 1 version, including USA insignia and number graphics that complete the military appearance with period-style identification. The subject itself is rooted in the M4 Sherman, the standard tank of the Allied armies and one of the most recognised armoured vehicles of the war. On the workbench, the small scale leaves room for careful painting, weathering and marking placement without demanding a large footprint. Once assembled, the model suits historical displays, compact armour collections and war game scenes that call for a Sherman silhouette with classic U.S. markings.
Model tanks
Italeri M4A1 Sherman with U.S. Infantry Kit
510006568€37.99
Italeri M4A1 Sherman with U.S. Infantry is a 1:35 scale plastic model kit that brings one of the most widely used U.S. medium tanks of World War II into a detailed build with added diorama character. The finished tank measures 167 mm in length, and the set pairs the Sherman with 10 infantry figures to create a fuller scene around the vehicle rather than a stand-alone armour display. The M4A1 version is defined here by the rounded lines of its fully cast upper hull and the rounded turret form, details that give this variant its distinct silhouette. The kit also features glueable T54E1 tracks, adding a specific running gear pattern to the build. A decal sheet covers 3 finishing versions, with markings such as stars, serial numbers, tactical symbols and vehicle names visible across the supplied options. Assembly time is stated as 600 minutes. Glue and paints are required separately. On the bench, the combination of tank and figures opens up several display directions, from a vehicle halted in an urban setting to a moving column with troops riding on the hull and turret. The 1:35 scale also works well for builders who enjoy painting uniforms, equipment, cast armour textures and period markings with close visual control.
Model tanks
Italeri M4A2 U.S. Marine Corps Tank Kit 1:35
510006583€35.99
Italeri M4A2 U.S. Marine Corps is a detailed 1:35 scale assembly kit that brings the Sherman medium tank into a focused build with a finished model length of 16.8 cm. The subject represents the diesel-powered M4A2 variant used by the United States Marine Corps in Pacific operations, giving the model a clear historical setting as the hull, turret and suspension come together piece by piece. The kit uses new gluable T54E1 tracks, a feature that adds extra definition to the running gear and changes how the lower hull reads once the tracks are fitted around the wheels and sprockets. A decal sheet for 4 versions opens up different marking choices, including named vehicles and alternate tactical codes, so the final finish can follow different U.S. Marine Corps examples from Iwo Jima in February 1945. The build is marked 14 Years+ and the stated assembly time is 600 minutes, which suits a project with multiple construction and finishing stages. Assembly kit contents are included. On the bench, the 1:35 format gives enough room to work through camouflage, turret markings and smaller exterior details with control. Once completed, the Sherman shape, Marine Corps markings and tracked stance give the model a strong presence in a WWII collection, diorama scene or display lineup centered on Pacific theatre vehicles.
Model tanks
Italeri M4A3 76mm Wet Sherman Tank Kit 1:35
510096440€28.49
Italeri M4A3 76mm Wet Sherman is a 1:35 scale model kit based on one of the most widely deployed American medium tanks of World War II. The late-war Sherman configuration combines the 76 mm gun with the Wet ammunition stowage concept introduced in 1944, where storage was redesigned to reduce the fire risk seen in earlier production vehicles. That historical layout gives the finished tank a specific operational identity tied to the final campaigns on the European front. The kit is built as a detailed plastic model and includes gluable rubber tracks, 1 figure, and decals for 6 versions. The Wet Sherman name came from ammunition storage protected by a propylene glycol solution, a technical change that crews valued in combat service. This version reflects a tank family produced in numerous variants, and the M4A3 76mm configuration stands out through its later-war combination of firepower and revised internal arrangement. The included marking options support different finishing approaches while keeping the same core vehicle type. On the workbench, the 1:35 scale gives room for careful painting across the hull, turret, running gear, and figure. Once completed, the model fits naturally into a World War II armour collection, a European theatre display, or a diorama scene with winter or late-war vehicle markings. Paints, glue and tools are required separately. Warning! Not suitable for children under 14 years.
Model tanks
Italeri M4A3E2 "JUMBO" 1:72 Tank Model Kit
510107520€16.99
Italeri M4A3E2 "JUMBO" brings the heavy Sherman variant into a compact 1:72 model kit with 2 matching tanks in one box. Each finished vehicle measures 8.3 cm and carries the broad hull, turreted layout and long gun profile that give this version its distinct battlefield look in a small display footprint. The set is built as a fast assembly kit, with 11 parts for each tank and a total build time stated as 600 minutes. That structure keeps the construction focused on the main forms of the vehicle rather than a dense parts count, making the pair well suited to hobby sessions that move from assembly into painting and markings. Special decals for 5 versions are included, adding white stars, serials and tactical markings that change the identity of the finished tanks across the pair. The kit is especially developed for wargame use, so the 2-model format fits naturally into tabletop forces, scenario building and linked vehicle displays. On a shelf, in a diorama or beside other 1:72 military subjects, the matched pair creates a coherent scene with consistent scale and proportions. Paints are required separately, which leaves room to finish the tanks in a cleaner parade look or a more weathered field appearance.
Model tanks
Italeri M4A3E8 Sherman Fury Model Set 1:56
510075001€24.99
The Italeri M4A3E8 Sherman Fury Model Set captures one of the most recognisable late-war tank variants in 1:56 scale. Built around the Easy Eight version of the M4 Sherman, the set focuses on the configuration that entered production at the end of 1944 and brought notable technical updates to the United States medium tank. At the centre of this variant is the 76 mm M1 high velocity gun, paired with the horizontal volute spring suspension system known as HVSS. In historical service, that suspension layout was introduced to improve driving conditions and support higher speed, and it gives the M4A3E8 a distinct profile within the wider Sherman family. The subject also carries strong historical context, as the Easy Eight saw action in the closing stages of World War II and later in the Korean War. That background gives the finished 1:56 build a clear place in military collections and period diorama scenes. With a minimum age marking of 14 Years, the set suits builders looking for a compact armour subject with a defined wartime identity. On a shelf, in a display case, or as part of a broader World War II line-up, the M4A3E8 Sherman Fury stands out through its late-production specification and its long service history. Warning! Not suitable for children under 14 years.
Model tanks
Italeri M7 Priest Kangaroo 1:72 Model Kit
510107513€16.99
Italeri M7 Priest Kangaroo 1:72 Model Kit brings 2 tracked military vehicles into a compact scale that suits both building sessions and finished battlefield scenes. The assembly kit is based on the US M7 Priest 105 mm and Kangaroo variants, with each completed model measuring 8.3 cm and carrying the low, open-topped silhouette that gives these vehicles their distinctive profile. The set is supplied as a fast assembly format, while the stated assembly time is 600 minutes, leaving room for a more deliberate approach to fitting, painting, and finishing. Decals for 5 versions expand the visual options with stars, serial numbers, and formation-style markings drawn from different service uses. The source material shown for the kit references M7 Priest versions for the U.S. Army in North Western Europe 1944 and the British Army in the Mediterranean Theater 1943, plus a Kangaroo version for the New Zealand Army in Northern Italy in early 1945. That spread gives the build a stronger historical frame than a single marking option. On a wargame table, in a military diorama, or lined up with other 1:72 armour, the 2-model format creates more scene depth than a single vehicle alone. The compact dimensions make placement easy on terrain sections, while the separate variants support convoy, artillery, or troop-carrying setups with a clear visual difference between the finished builds.
Model tanks
Italeri M8 / M20 Model Set 1:56 with Driver
510015759€19.99
Italeri M8 / M20 brings a compact military vehicle subject into 1:56 scale with a finished length of about 107 mm, combining a detailed plastic model set with a tank driver figure for a build that carries presence without taking much display space. The proportions suit shelf presentation, small diorama layouts and focused paintwork where vehicle and crew can be finished as one scene. The set is based on 100% new moulds, giving this release a fresh tooling basis for the parts. In 1:56 scale, the M8 / M20 format works well alongside other small-scale military subjects and scenery elements, while the included driver adds a human reference point that changes how the finished build reads in a display. The plastic construction supports classic model-making steps such as cleanup, glue assembly and painted finishing. 14 years is the stated age marking for this set. On the workbench, the 107 mm size keeps handling practical during assembly, painting and detail work. Once completed, the M8 / M20 and driver figure fit naturally into compact historical scenes, cabinet displays or lineups with other 1:56 scale vehicles. Glue, paints and brush are required separately. Warning! Not suitable for children under 14 years.
Model tanks
Italeri M8/M20 Greyhound Model Kit 1:56
510025759€21.99
The Italeri M8/M20 Greyhound brings a compact WWII armored car subject to the workbench in 1:56 scale, with 74 parts that build into either the M8 reconnaissance vehicle or the M20 command variant. The 600-minute assembly gives space for careful work on the angular armored hull, 6-wheel layout, turreted profile and the distinct field character that made the Greyhound family widely used in wartime service. The M8 version is defined by its turret-mounted 37 mm cannon, a feature that marked the shift from earlier scout cars toward a more heavily armed reconnaissance vehicle. The M20 version develops the same base vehicle for military police and command duties, giving the kit a second historically grounded configuration. Waterslide decals for 2 versions support authentic finishing with U.S. Army stars, registration numbers and unit markings. The subject matter reaches from the Italian front, including Monte Cassino and Anzio, to the June 1944 D-Day operations, adding strong historical context to the finished model. On the bench, the kit suits focused painting, marking placement and detail work across the hull and running gear. Once completed, the Greyhound fits naturally into WWII dioramas, military vehicle collections or shelf displays where the compact 1:56 format works well alongside other armor subjects. Paints, glue and tools are required separately. Warning! Not suitable for children under 14 years.
Model tanks
Italeri M978 Fuel Service Truck Model Kit 1:35
510006554€48.99
The Italeri M978 Fuel Service Truck captures the HEMTT fuel-servicing variant as a detailed 1:35 scale assembly kit with a finished length of 29.7 cm. Its 8-wheel-drive military tanker layout, angular cab and cylindrical tank body give the model the unmistakable profile of a heavy logistics vehicle built for demanding terrain. The subject represents the M978 version developed for fuel transport duties, with the full-size vehicle carrying over 9,500 liters in its tank. That role gives the build a distinct identity within military transport subjects, separating it from cargo or equipment carriers in the same HEMTT family. The kit uses upgraded moulds and comes with a color instruction sheet to support the painting stages with clearer visual guidance. New rims and rubber tyres refine the running gear, while the decal sheet adds service labels, hazard warnings, JP-8 markings, tie-down points and other technical stencils that bring the tanker body to life. Decals for 2 versions allow different finishing choices within the same vehicle type. Across the workbench, the combination of large structural parts and smaller service details creates a build with clear visual progress from chassis and cab to tank and markings. With 600 minutes assembly time and a 14 years recommendation, the kit suits focused painting sessions, careful decal placement and a finished display that carries the operational character of a U.S. Army fuel truck used in Iraq and Afghanistan.
Military aeroplane models
Italeri Macchi MC.200 1:32 Model Kit PE-Parts
510002516€99.99
The Italeri Macchi MC.200 1:32 model kit with PE-Parts brings a key Italian World War II fighter into a scale format shaped for detailed bench work and historically grounded finishing. Its subject stands out through a monoplane configuration and all-metal aircraft construction, marking a clear step away from the Fiat CR.32 and Fiat CR.42 biplanes that still served at the opening of the war. The original aircraft was designed by Mario Castoldi and flew with a 14-cylinder twin-row Fiat A.74 RC.38 radial engine rated at 840 hp, reaching speeds of up to 500 km/h. Above the engine sat 2 x 12.7 mm Breda-SAFAT machine guns, placed around the distinctive bulged cowling that gives the nose its recognisable shape. Later versions added 2 more 7.7 mm Breda-SAFAT machine guns in the wings, adding another layer of reference detail for builders exploring the type's development. Service with the Regia Aeronautica took the Macchi MC.200 across North Africa, the Mediterranean, the Balkans and the Eastern Front in Russia, giving the aircraft a wide operational backdrop for markings, weathering direction and theatre-based presentation. 14 Years+
Military aeroplane models
Italeri Macchi MC.202 Folgore 1:48 model kit
510002840€42.99
The Italeri Macchi MC.202 Folgore 1:48 model kit brings one of the Regia Aeronautica's most distinctive fighters into a scale format that suits careful assembly and finishing. Its subject is the early Folgore, an aircraft shaped by a notably clean aerodynamic layout and powered in service by the DB 601 inline engine produced under license by the Italian aeronautical industry. That background gives the build a strong technical identity beyond its outline alone. The Macchi MC.202 marked a clear step forward from earlier radial-engine fighters such as the Fiat G-50 and the Macchi MC-200, with improved flight performance and a top speed of 600 km/h. Early versions carried 2 12.7 mm Breda-SAFAT machine guns mounted on the nose, a configuration that helps define the aircraft's compact front-end appearance. The combination of speed, maneuverability and streamlined design makes the Folgore a subject with real presence on the workbench and on display. During assembly, the aircraft's proportions and fighter layout come into focus piece by piece, making the 1:48 scale especially effective for appreciating the balance between engine installation, fuselage shape and wing form. Once finished, the model suits a shelf, cabinet or aviation-themed display where Second World War aircraft and Italian fighter development take center stage. Warning! Not suitable for children under 14 years.
Model trucks
Italeri MAN F8 19.321 2Achs Model Kit 1:24
510003946€61.99
The Italeri MAN F8 19.321 2Achs brings a classic European road tractor into 1:24 scale with a finished model length of 25.5 cm and the distinctive proportions of the 2-axle 19.321 configuration. As a detailed assembly kit, it captures a truck that became a familiar sight in logistics, goods handling and long-distance transport during the late 1960s through the mid-1980s. The subject combines the MAN F8 series with the cab design developed by Saviem, a pairing that shaped the character of the original vehicle. The full-size truck was known for its longitudinal front-mounted 6-cylinder engine layout, and that historic configuration gives the model a strong technical identity beyond its exterior lines. Sprue-based construction breaks the build into dedicated sections such as the frame, undercarriage, interior and cab, so each stage adds visible structure before the final bodywork and markings go on. The decal sheet expands the finish with retro striping, grille branding, dashboard detail, speed signs, T.I.R. markings and multiple European plate options. On the bench, the kit suits builders who enjoy commercial vehicle subjects with period detail and a clear mechanical theme. The stated assembly time is 600 minutes. Paints, cement and tools are required separately.
Model trucks
Italeri MAN TGX XXL D38 1:24 Truck Model Kit
510003959€59.99
Italeri MAN TGX XXL D38 is a 1:24 scale truck model kit built around the shape and stance of MAN's long-haul tractor unit. The tall XXL cab, aerodynamic body lines and detailed chassis give the finished replica the look of a modern road hauler, whether it stands on a shelf or joins a larger transport-themed collection. The kit is supplied as an assembly kit and uses separate cab, chassis and wheel components to build up the truck step by step. Clear parts form the glazing, while interior pieces add structure inside the cab. The contents shown for this kit include 7 tyres, decal markings, chrome-look adhesive details and a mesh insert for added surface variation across the front and body sections. The source vehicle is based on the MAN TGX XXL with the 6-cylinder D38 engine line, known for output figures of up to 640 HP and 3,000 Nm in the full-size truck. Assembly time is 600 minutes. On the bench, the combination of structural parts and finishing elements supports a focused build with painting, detailing and final marking placement. Once completed, the model suits display alongside other 1:24 commercial vehicles and brings the character of a contemporary European tractor unit into a scale fleet setting.
Model tanks
Italeri Marder III Ausf. H Model Kit 1:35
510006566€31.99
Italeri presents the 1:35 Dt. Sd.Kfz.138 Marder III Ausf. H as a detailed plastic model kit built around one of the most recognizable German tank destroyer layouts of the Second World War. The open fighting compartment, the slanted gun shield and the long 75 mm anti-tank gun give the finished vehicle a striking profile that stands out in a military collection or diorama scene. The full-size Marder III was developed on the chassis of the Panzerkampfwagen 38(t), and this kit captures that distinctive arrangement with the engine placed at the rear and the weapon system in the middle of the vehicle. The model uses link-and-length tracks, allowing the track run to follow the wheels and sprockets with a more defined shape than a single-piece band. Detailed sprues include hull panels, running gear parts, tools, gun components and crew figures, giving the build plenty of surface detail to work through. Decals for 4 versions add further finishing options with different markings and tactical identities. During the build, the model moves from the lower hull and running gear to the superstructure, gun installation and exterior fittings, creating a focused project over the stated 600-minute assembly time. Once painted and marked, the Marder III Ausf. H suits shelf display, historical vehicle collections and diorama settings that highlight its low silhouette, long barrel and open combat compartment. Assembly kit included. Warning! Not suitable for children under 14 years.
Model tools
Italeri Masking Tape Roll 3 mm x 18 m 2-Pack
510050826€4.891 m = €0.27
Italeri Masking Tape Roll 3 mm x 18 m 2-Pack brings a precise masking format to paint and finishing work on assembly kits. The narrow 3 mm width helps track fine contours, slim borders and small surface sections where broader tape can be harder to place cleanly. Each roll provides 18 m of tape, and the pack contains 2 rolls for ongoing workshop use across multiple stages. The roll format allows short strips, longer runs or layered sections to be cut as needed for the task at hand. On painted parts, the tape can be placed along edges before the next colour is applied, then lifted after the paint stage is complete. This makes it useful for separating adjacent colour areas, protecting selected sections and keeping detail work controlled on smaller components. As an assembly kit accessory, it fits naturally into build routines that involve painting, marking boundaries and refining finishes over extended sessions. On the bench, the 2-roll pack supports repeated use during body painting, detail accents and correction work. The 600-minute assembly time and 14 years marking place it within longer, more involved kit projects where careful preparation and clean paint separation matter.
Model tools
Italeri Masking Tape Roll 6 mm x 18 m 2-Pack
510050827€5.491 m = €0.31
Italeri Masking Tape Roll 6 mm x 18 m 2-Pack brings a precise masking format to model finishing, with 2 narrow rolls that help define paint edges on small parts and tight surface sections. The 6 mm width gives close control where wider tape can cover surrounding detail, making it useful for trim lines, framed areas and other narrow paint boundaries. Each roll provides 18 m of tape, so the pack stays useful through repeated painting sessions and multi-step finishing work. The slim format can be laid along straight runs or guided around smaller sections that need a controlled edge before colour is applied. As an assembly kit accessory within the model supplies range, it fits naturally into bench setups focused on painting, detailing and surface preparation. Assembly time is stated as 600 minutes. Batteries are not included. On a workbench, the 2-roll pack supports ongoing masking tasks across more than one build or across several paint stages on the same model. It also works well as a reserve supply for hobby setups that regularly handle fine-line paint separation and careful finishing on scale subjects.
Military aeroplane models
Italeri Me 323 Gigant model kit 1:72 scale
510090104€74.99
The Italeri Me 323 Gigant model kit brings a landmark transport aircraft into 1:72 scale, translating the vast proportions of the Messerschmitt Me 323 Gigant into a detailed plastic build with a strong historical profile. Originally developed from a glider, the Me-323 "Gigant" evolved into a long-range transport aircraft for the Luftwaffe, created to move troops and materials across extended supply routes during the Second World War. Its wing leading edge carried 6 radial engines to provide the power needed for fully loaded flight operations. The enormous fuselage was designed to carry more than 120 men as well as supplies, artillery pieces and light vehicles, a transport capacity that made the type a milestone in aviation history. Maximum speed only slightly exceeded 240 km/h, underlining the aircraft's emphasis on load carrying rather than fast transit. This 1:72 kit suits builders aged 14 years and up who want a subject with a clear operational story, from North African and Tunisian supply missions to service on the Russian front. On the shelf, the Me 323 Gigant stands apart through its unusual scale, transport configuration and 6-engine layout, giving the finished aircraft a distinctive presence among military aviation models. Warning! Not suitable for children under 14 years.
Model car kit
Italeri Mercedes Benz 540K Model Kit 1:24
510003701€29.99
The Italeri Mercedes Benz 540K assembly kit captures one of the standout automobiles of 1936-39 in 1:24 scale, translating the long bonnet, sweeping fenders and open touring profile into a build with strong visual character. At about 243 mm in length, the model has the size to show the proportions of this historic car clearly once completed. The full-size Mercedes Benz 540K combined an 8-cylinder 5.4 l engine with a vehicle weight of 2300 kg and a top speed of 170 km/h, and those figures give the subject a distinct place in automotive history. That background adds depth during painting and finishing, because the model represents a machine known for both presence and performance in its era. The kit format suits a measured approach, with a stated assembly time of 600 minutes that leaves room for careful work across the body, interior and exterior details. Assembly kit contents are included. Paints are required separately. On a worktable, the 1:24 format supports a focused build session with enough physical size for steady handling and visible progress across each stage. Once finished, the Mercedes Benz 540K sits naturally in a classic car collection, on a display shelf, or alongside other historic vehicle models where its pre-war silhouette can be appreciated from every angle.
Model car kit
Italeri Mercedes-Benz 190E 1:24 model kit
510003624€37.99
The Italeri Mercedes-Benz 190E 1:24 model kit brings a landmark sports sedan into a hands-on scale build shaped by the 2.3 16V and the 1984 Nurburgring Race of Champions theme. Its plastic assembly format turns the car's crisp proportions, rear spoiler and competition markings into a display-focused project with a strong period motorsport presence. The full-size 190E, introduced in 1982, marked a major step in Mercedes-Benz design and engineering, and this kit draws on that background with details linked to the car's technical layout. The source vehicle used a longitudinal front engine, rear-wheel drive, disc brakes on all 4 wheels, a MacPherson front end and multilink rear suspension. Inside the build, separate cockpit parts such as seats, steering wheel and dashboard add structure to the interior, while engine and radiator assemblies develop the front compartment with more mechanical depth. Alternative decal and plate details expand finishing choices across different display versions. During assembly, the model moves through body, interior and mechanical subassemblies before the final exterior details bring the silhouette together. The 600-minute build time suits focused bench sessions, whether the aim is a clean road-car presentation or a race-inspired version using the included event graphics. Radio gear, a battery pack, a charger and paints are required separately.
Military aeroplane models
Italeri Messerschmitt BF-109 G-6 Model Kit 1:72
510000063€11.49
The Italeri 1:72 Messerschmitt BF-109 G-6 brings a key World War II fighter aircraft into a compact model kit with a finished length of 12 cm. Its scale gives the aircraft's slim fuselage, single-propeller layout and wing profile a crisp presence on the workbench and in a display setting. This assembly kit focuses on the G-6 version, the development stage that followed the earlier F variant. Contemporary service history in the source data links this aircraft to a more powerful engine for higher speed and altitude, with some machines also carrying increased firepower against Allied bombers. That background gives the build a specific historical identity rather than a generic aircraft outline. The set also provides decals for 3 versions, allowing different markings and visual finishes across the same airframe. With an assembly time of 600 minutes, the project leaves room for careful preparation, painting and final detailing across multiple sessions. On the bench, the 1:72 format suits measured, detail-led building where camouflage, insignia placement and small surface features shape the final result. Once completed, the Messerschmitt BF-109 G-6 fits naturally into aviation collections, historical displays or a line-up of World War II aircraft in matching scale.
Military helicopters
Italeri MH-53 E Sea Dragon Model Kit 1:72
510001065€26.99
The Italeri MH-53 E Sea Dragon model kit brings a distinctive naval helicopter into 1:72 scale with a finished length of 32 cm and the broad, heavy-lift proportions that define this aircraft. As an assembly kit, it focuses on the structure of the Sea Dragon itself, from the long fuselage and side sponsons to the prominent rotor arrangement that gives the helicopter its unmistakable profile. This version represents the MH-53 E, a 3-engine development of the CH-53 family used for mine-sweeping duties. The subject stands out through the combination of a large airframe and the equipment-carrying role described for the full-size helicopter, which handled heavy mine-detection systems deployed over the sea. The kit parts shown for the build include major fuselage sections, rotor blades, landing gear elements, engine-area components and smaller exterior details, giving the finished model a layered, technical look. Cockpit glazing and surface features add further definition during construction, while the included decal sheet supports an accurate military finish. With an assembly time of 600 minutes, the build suits a slower, step-by-step approach at the workbench, where painting, joining the airframe and applying markings each have room to shape the final result. Once completed, the MH-53 E Sea Dragon fits naturally into aircraft collections, military aviation displays or a line-up of rotary-wing subjects from the Cold War era and beyond.
Military aeroplane models
Italeri MIG-27 Flogger Model Kit 1:48 Scale
510002817€41.49
The Italeri MIG-27 Flogger brings a military aircraft subject into a focused scale build with a 1:48 format that balances visible detail and manageable size. As a plastic kit, it centers on hands-on assembly, where the fuselage, wings and aircraft form come together step by step into a finished display model. The detailed kit format gives room for careful work across the aircraft's surfaces and structure, making painting and finishing an important part of the result. The 1:48 scale is widely used for aircraft subjects, offering enough presence for panel shaping and visual definition while remaining practical for shelves, cabinets or hobby workspaces. The MIG-27 Flogger designation gives the build a distinct jet profile, with the swept-wing layout and attack-aircraft character shaping the final look. 14 Years is the stated age marking for this model kit. On the worktable, the build suits sessions focused on trimming, fitting and finishing individual sections before final assembly. Once completed, the model sits comfortably in a display setting, where the aircraft silhouette and scale proportions can be appreciated from nose to tail. Warning! Not suitable for children under 14 years.
Model tools
Italeri Mini Diamond File Set 3 Pieces 100 mm
510050820€13.99
The Italeri Mini diamond file set brings precise hand finishing to small parts, with 3 compact files in a 100 mm size that suit close, controlled work at the bench. The set is built for detail-focused tasks where edges, openings and contact points need careful adjustment rather than heavy material removal. The 3 included profiles cover different shaping needs across model and craft work. A flat file works along straight sections and flat faces, a round taper reaches curved channels and drilled openings, and a pointed profile gets into corners where broader tools cannot follow. The diamond-coated surfaces support steady abrasion on fine areas, making the set useful for smoothing, deburring and refining joins on small components. Assembly is required, and the stated assembly time is 600 minutes. On model parts, the files can be used to clean cut points, tune mating surfaces and sharpen small contours before final finishing. They also suit careful workshop use on detailed components where short strokes and close control matter more than tool size. The compact format stores easily with other bench tools and stays ready for repeated touch-up work during longer building sessions.
Model tools
Italeri Mini snips straight for photo-etched
510050817€16.99
Italeri Mini snips straight for photo-etched bring a focused cutting tool to detailed model work, where small metal parts need a clean separation before fitting and finishing. The straight cutting form suits close access on fine components, helping maintain control during trimming steps that can shape the final look of a build. The tool sits within the Italeri Professional tools and brushes range, a line centered on detail and precision for scale modelling tasks. Its compact format supports careful hand positioning around narrow attachment points and small etched sections. The product data states metal construction, which matches the precise, workshop-oriented character of the tool. Assembly is required, and the stated assembly time is 600 minutes. The included components are listed as an assembly kit. On the bench, these mini snips fit naturally into stages such as preparing photo-etched details, refining small parts before placement, and cleaning up pieces ahead of gluing or painting. The 14 Years age marking is stated in the product data, making this a clearly specified hobby tool for older builders working through longer, detail-led model sessions.
Military aeroplane models
Italeri Mirage 2000 D Aircraft Model Kit 1:72
510090023€22.49
The Italeri Mirage 2000 D aircraft model kit in 1:72 scale brings the lines of the French multirole fighter into a compact format for detailed building and display. Its delta-wing layout, pointed nose, side air intakes and tandem two-seat canopy give the finished aircraft the unmistakable profile of the Mirage 2000 family, while the Mirage 2000D version adds the mission-focused twin-seat configuration used for low-altitude penetration and ground-attack roles. This detailed plastic kit is based on an aircraft that entered service in the early 1980s and later evolved from an air-superiority and interception platform into a strike variant with a broader mission range. The Mirage 2000D served with the French Armee de l'Air and was deployed in operational theaters including Libya and Afghanistan. A new decals edition supports accurate finishing work, and the box presentation identifies the Mirage 2000 B/D subject with a super decals sheet. Figures are not included. For builders aged 14 years and up, the 1:72 scale keeps the project manageable while still leaving room to work on the aircraft's sharp geometry and military markings. The completed jet suits a display shelf, desk or model aircraft collection, where the tandem cockpit, underwing stores and clean delta planform stand out from larger swept-wing fighter designs. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri Mirage F1 C/CR Aircraft Model Kit 1:48
510002839€34.99
The Italeri Mirage F1 C/CR brings the distinctive Dassault fighter into 1:48 scale as a detailed plastic aircraft model kit. Its swept-wing layout, long pointed nose and military jet profile give the finished replica a crisp presence on a shelf, workbench or diorama setting. This kit draws on the Mirage F-1, the aircraft developed to replace the Mirage III in French service and introduced with the French Air Force at the end of 1973. Unlike the earlier delta-wing design, the Mirage F-1 used swept wings, a change that improved flight performance and manoeuvrability in the full-size aircraft and defines the shape of this replica. The box states one model and a super decals sheet for 5 versions. Those marking options cover Mirage F1C, Mirage F1CR and Mirage F1M subjects, including French Air Force schemes, a Spanish Air Force Nato Tiger Meet 2009 aircraft, and an ATAC aircraft marked at N.A.S. Miramar in March 2024. The range of liveries supports very different finishing approaches, from light blue-grey interceptor schemes to later multitone reconnaissance camouflage and special tail graphics. During painting and decaling, the serials, roundels, rescue markings and unit insignia create a more specific historical identity for the chosen aircraft. Age 14 Years+. Figure not included. Warning! Not suitable for children under 14 years.
Catalogues & merchandise
Italeri Model Preview 2026 EN/IT Models Guide
510009338€0.99
Italeri Model Preview 2026 EN/IT gathers the announced 2026 Italeri line-up into a bilingual printed reference with English and Italian text. The format gives model builders a straightforward way to scan upcoming subjects, compare planned releases and keep the year's programme close at hand during hobby planning. As a physical preview publication rather than a kit, this edition focuses on overview and orientation within the Italeri range. The EN/IT layout supports browsing across 2 languages, which is useful for shared reading, club discussions and collection planning. On a workbench, desk or shelf, the printed format stays visible while checking future additions against current projects, existing collections or planned purchases. The 2026 designation keeps the contents tied to a specific programme year instead of a general catalogue. Suitable from 14 Years, this reference works well for hobby rooms, club meetings and quiet planning sessions where a printed guide is easier to pass around than a screen. It also fits collectors who track upcoming subjects by year and want the Italeri programme in a compact format that can be revisited whenever new build ideas take shape.
Model tools
Italeri Modelling Workstation MDF DIN A3
510050833€48.49
The Italeri modelling workstation brings a dedicated bench format to scale model work with an MDF structure and a DIN A3 footprint that frames assembly, painting and detailing in one organised space. On the main surface, a gridded cutting mat supports measured trimming and part placement, while the upright rear section keeps frequently used tools visible instead of scattered across the table. Multiple hole sizes and horizontal slots accommodate different hand tools, including brushes, tweezers, files and cutters, so each type can be stored in a fixed position. The stepped rear layout also creates separate zones for paint jars, glue bottles and small accessories, which helps keep the central work area open for body shells, subassemblies and loose components. This layout suits careful tasks such as dry fitting, masking, touch-up painting and decal preparation, where quick access to the next tool matters as much as the tool itself. Assembly is required, and the stated assembly time is 600 minutes. During longer bench sessions, the workstation supports a tidier rhythm: tools return to the same holder, paints stay grouped at the back, and the DIN A3 surface remains available for the current stage of the build. It fits naturally into model making routines that move between trimming parts, checking alignment, painting details and setting assemblies aside between steps.
Military figures & accessories
Italeri Modern US Soldiers Model Set 1:72
510006168€10.99
Italeri Modern US Soldiers brings a full modern infantry unit into 1:72 scale, with 50 unpainted figures ready to shape battlefield scenes, display bases and military layouts with convincing group presence. The varied poses give the set a more natural rhythm on the ground, from advancing riflemen to communication and support roles that break up repeated silhouettes. The figures are supplied as an assembly kit and invite a hands-on finishing process, with 600 minutes assembly time stated for the set. Uniform details, helmets, field gear and weapon shapes are moulded into the miniatures, giving painters clear surfaces for camouflage, webbing and equipment accents. The 1:72 format also makes the set easy to combine with vehicles, terrain pieces and architectural elements built to the same scale. Because the figures are unpainted, colour schemes can be matched to a specific theatre, unit style or display concept rather than fixed by a factory finish. On a wargaming table, the 50-figure count supports larger formations, support positions and scattered movement across wider terrain sections. In a diorama, the mix of combat roles helps create scenes that feel organised and active, whether the setting calls for a patrol, a perimeter position or a coordinated infantry advance.
Model figures
Italeri Napoleonic Wars French Light Cavalry 1:72
510106080€12.49
Italeri Napoleonic Wars French Light Cavalry 1:72 brings a mounted formation from the second half of the Empire into a compact historical figure set. The assembly kit contains 17 riders, creating the mass and rhythm needed for cavalry lines, charges and reserve formations across dioramas or tabletop battle layouts. The subject centres on the French light cavalry arm, with hussars and chasseurs a cheval forming the core reference for the set. Uniform treatment distinguishes elite companies in skin hats from line light horsemen in shakos, so the finished group can show rank-and-file contrast instead of a single repeated look. The unassembled parts are arranged as horse and rider components, allowing each figure to be prepared, assembled and painted with attention to harness, posture and weapon handling. The 1:72 scale also makes the set easy to combine with other historical miniatures, terrain pieces and artillery from the same period. A 600-minute assembly time points to a longer modelling project built around steady figure work rather than a quick snap-together session. Once painted, the mounted troop works in battle recreations linked to commanders such as Lasalle and Colbert, or as a focused display of French cavalry uniforms and battlefield motion from the Napoleonic era.
Military aeroplane models
Italeri NATO Pilots and Ground Crew Figure Kit
510101246€11.49
Italeri NATO Pilots and Ground Crew brings military aviation scenes to life in 1:72 scale with 48 unpainted figures designed for detailed airfield and flight deck dioramas. The set focuses on the human activity around an aircraft, adding motion, coordination and operational context beside parked, serviced or launch-ready models. The figures arrive as an assembly kit on sprues, giving builders the freedom to prepare, paint and place each pose to suit a chosen scene. The mix shown in the set supports a wide range of aviation roles, from pilots and signalling crew to maintenance staff and ground personnel. Because the figures are unpainted, uniforms and equipment can be finished to match different NATO aircraft displays or broader military settings. The stated assembly time is 600 minutes, which suits a measured build with attention to painting and arrangement. Placed around a jet on a runway, beside a hardened shelter or across a carrier-style deck scene, the set helps turn a static aircraft display into a more complete operational moment. It also works as a companion set for 1:72 aircraft collections where crew presence, servicing activity and realistic spacing between figures add depth to the finished layout.
Military figures & accessories
Italeri NATO Troops 1:72 Figure Model Kit
510006191€10.99
Italeri NATO Troops brings a military figure project into 1:72 scale with unassembled infantry miniatures that suit painted displays, wargaming tables, and diorama work. The beige parts arrive as an assembly kit, giving each figure a clean starting point for trimming, painting, and placement within a finished scene. The set draws its character from varied troop poses rather than a single repeated stance. Standing, kneeling, aiming, advancing, and signaling figures create a more natural group composition once arranged on terrain or a display base. Sculpted details such as helmets, uniforms, boots, gear pouches, webbing, and firearms give painters clear reference points for colour separation and weathering work. The pack artwork identifies the subject as NATO Troops from the 1980s, which helps place the figures within Cold War era layouts and military collections. Assembly is required, with a stated assembly time of 600 minutes. On a workbench, the sprues support a steady build rhythm: parts can be removed, cleaned, painted, and grouped into squads or patrol formations. In a finished diorama, the mix of poses helps create checkpoints, field movements, and defensive positions that look active from several viewing angles.
Model motorcycles
Italeri Norton Manx 500cc 1951 Model Kit 1:9
510004602€59.99
The Italeri Norton Manx 500cc 1951 model kit brings a landmark racing motorcycle into a large 1:9 scale, with a finished model dimension of 22 cm that gives the classic silhouette real presence on a shelf or in a display case. The subject recreates the famous single-cylinder 500 cc machine associated with world championship success in 1950 and 1951 and with the demanding Tourist Trophy circuit. Its engineering character is a central part of the build. The kit represents the Norton Manx with an exposed engine layout, spoked wheels, race number plates, front fork assemblies, frame tubes and side covers that build up the motorcycle section by section. Instruction visuals show separate springs, screws, rods and cut-to-length lines, adding workshop-style detail to the fork, engine and chassis areas. Waterslide decals provide Norton tank graphics, number options, trim elements and a gauge face, so the finished motorcycle can be completed with period racing markings rather than plain surfaces alone. With a stated assembly time of 600 minutes, this assembly kit suits an unhurried build table setup where painting, fitting and decal placement can be handled in stages. The finished motorcycle works well as a display piece beside other historic racing subjects, and the large scale leaves mechanical features such as the cylinder fins, drivetrain and wheel structure clearly visible.
Military aeroplane models
Italeri OA-4M Skyhawk II Aircraft Kit 1:72
510090165€18.99
The Italeri OA-4M Skyhawk II is a detailed plastic kit in 1:72 scale that brings a distinctive 2-seat military aircraft to the workbench. Based on the OA-4M, a light attack and advanced training version of the Douglas A-4 Skyhawk, the model reflects an aircraft layout defined by low-mounted delta wings and compact side air intakes, creating the lean silhouette that made the Skyhawk family so recognisable in aviation history. Developed in the 1970s by McDonnell Douglas for the operational needs of the United States Marine Corps, the OA-4M was designed to fly alongside single-seat variants in tactical support, reconnaissance, and pilot operational training missions. That background gives this kit a strong historical identity beyond its shape alone. The subject also stands apart through its upgraded avionics compared with earlier Skyhawk versions, representing a later stage in the aircraft's operational development. On the bench, the 1:72 format supports a focused aircraft build with enough presence for display while keeping the project manageable in size. The twin-seat configuration, compact attack-jet proportions, and service-linked role make this kit a strong pick for military aviation collections centred on post-war aircraft and United States Marine Corps types. Warning! Not suitable for children under 14 years.
Model trucks
Italeri Opel Blitz Truck Model Kit 1:24 Scale
510003960€45.99
The Italeri 1:24 Opel Blitz Truck model kit brings a classic commercial vehicle into scale form with a detailed build that captures the shape and working character of this well-known truck. The finished model reflects the Opel Blitz as a civilian transport vehicle, with a rounded cab, upright grille, open cargo bed and period markings that give the truck a clear historical presence on the bench or in a collection. The unassembled kit is supplied as an assembly set and uses sprues with numerous separate parts for the chassis rails, axle housings, leaf springs, fenders, seats, steering wheel and body sections. That parts layout gives the build visible mechanical structure rather than a simplified shell. The 1:24 scale allows finer exterior and underbody detail to remain easy to see during construction and after painting. Historic brewery decoration adds another layer of finish, with side lettering and door graphics that reinforce the truck's civilian delivery role. Assembly is required, and the stated assembly time is 600 minutes. Paints, cement and tools are required separately. This subject fits longer model-building sessions where chassis work, body painting and final detailing each have room to develop at their own pace. Once completed, the Opel Blitz Truck suits shelf display alongside other historic transport subjects and brings a distinct commercial vehicle theme to a 1:24 scale collection. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Opel Blitz Typ A 4x4 Model Kit 1:35
510006760€33.49
The Italeri Sd.Kfz. 305 Opel Blitz Typ A 4x4 model kit captures a military transport truck that served across multiple theatres during the Second World War. In 1:35 scale, the build centres on the Typ A 4x4 version, a configuration developed to maintain traction on difficult terrain while preserving the clear, work-focused lines of the Opel Blitz design. The subject stands out through its twin rear wheels and medium truck layout, details that gave the original vehicle its load-carrying role within army logistics. Italeri presents this vehicle as a detailed kit, allowing the chassis, cab and cargo body to come together as a focused scale build rather than a simplified display piece. The form of the truck reflects a design created for large-scale manufacture, field maintenance and broad operational use, which gives the finished model a purposeful mechanical character. On the workbench, the 1:35 scale suits diorama settings, convoy scenes and military vehicle collections where the Opel Blitz can be placed alongside figures, equipment or other vehicles of the same scale. Recommended age: 14 years and up. Paints, glue and tools are required separately. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri P-38J Lightning 1:48 Aircraft Model Kit
510002834€40.49
The Italeri P-38J Lightning 1:48 aircraft model kit brings one of World War II's most distinctive fighter designs to the workbench with its twin-boom airframe and forward central cockpit. That unusual aerodynamic layout gives the finished model a striking presence in display form while keeping the build rooted in a historically recognisable aircraft. The full-size Lockheed P-38 Lightning used 2 Allison V-1710 V-12 engines rated at 1425 hp each and reached more than 660 km/h, details that define the character behind this scale replica. Its armament combined 4 Browning 12.7 mm machine guns with a Hispano M2 cannon, concentrating firepower in the nose rather than the wings. The aircraft's long-range role made it especially effective in the Pacific theatre and in bomber escort missions over Europe. This boxing also broadens the project with alternative F-5E, Droopsnoot and Pathfinder versions, allowing different mission-specific interpretations of the same airframe. Over 600 minutes of assembly time make this a substantial modelling session with room for careful painting, decal placement and finishing. On the shelf, the P-38J shape, silver airframe styling and period markings create a focused WWII aviation display with strong historical character. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri P-51D Mustang Aces Aircraft Kit 1:72
510001484€17.49
The Italeri P-51D Mustang Aces kit in 1:72 scale brings one of World War II's most recognized fighter aircraft into a compact build with strong historical character. Based on the P-51D, the most widely produced Mustang variant, this detailed plastic aircraft kit captures the form of the escort fighter that became a defining presence over the European front. The full-size aircraft was developed in remarkably short time around a Packard V-12 engine producing more than 1,600 horsepower, allowing speeds above 700 km/h. That performance made the Mustang a key escort for bomber formations and also a capable fighter-bomber for ground attack missions. The P-51D configuration carried 6 wing-mounted 12.7 mm Browning machine guns, a layout that helped define its operational role. This edition focuses on 5 USAAF aces versions, connecting the finished model to pilots such as Maj. George E. Preddy, Lt. Col. John C. Meyer, Capt. John J. Voll, Maj. Richard 'Pete' Peterson and Maj. Leonard 'Kit' Carson. Figure not included. On the bench, the 1:72 format suits focused painting, decaling and display without demanding much space. The finished aircraft fits naturally into WWII aviation collections, dioramas or shelf displays where squadron markings and the Mustang silhouette can stand out. Recommended age: 14 years and up. Warning! Not suitable for children under 14 years.
Model tanks
Italeri PAK40 AT Gun Model Kit with Servants
510106096€10.99
The Italeri 1:72 WWII German PAK40 AT Gun w/servants brings a key artillery piece of the Second World War into a compact model kit format, combining the long 75 mm barrel, shielded carriage and crew figures in a scene that suits battlefield displays and historical dioramas. Its 1:72 scale makes the gun easy to place with other military miniatures while still leaving room for visible structural detail. The Pak 40 entered service at the beginning of 1941 and became the standard anti-tank gun of the German army. In the source data, the weapon is described as weighing 1500 kg and being able to penetrate a 70 mm plate at a range of 2000 meters, details that give the finished model a clear historical identity beyond its silhouette alone. The same gun design was also used, in slightly modified form, on tank destroyers such as the Marder, StuG III and Hetzer, which adds further context for collectors building vehicle-linked WWII scenes. Assembly is required, with a stated build time of 600 minutes. Once completed, the gun and servants can anchor a trench line, roadside firing position or wider combat layout, with the crew figures helping the emplacement read as an active field setup rather than a standalone cannon.
Model tanks
Italeri Panther Ausf. D Tank Model Kit 1:35
510090290€34.99
The Italeri Panther Ausf. D brings one of the most recognized armored vehicles of the Second World War into a 1:35 model kit format with a subject that suits both focused assembly and historically themed display. As the first operational Panther version, the Ausf. D gives the build a defined place in the vehicle's development and a clear reference point for period finishing choices. The full-size Panzerkampfwagen V was developed in response to the Soviet T-34 and KV-1 after the Panzer III and Panzer IV had fallen behind on the Eastern Front. Its layout combined sloped frontal armor, mobility, speed and firepower in a way that made the type stand out across multiple theatres, including Italy, France and the Eastern Front. The original vehicle used a 700-horsepower Maybach V-12 engine and a high-velocity 75 mm KwK 42 gun, details that give the subject its distinct technical identity within Second World War armor history. On the bench, the 1:35 scale supports careful painting, weathering and integration into diorama scenes without demanding excessive display space. The detailed plastic kit structure keeps the focus on the build itself, whether the finished Panther Ausf. D is presented as a standalone tank or placed into a broader historical collection. Recommended age: 14 years and up.
Model tanks
Italeri Panther Ausf.A Model Set Tank 1:56
510075003€24.99
The Italeri Sd.Kfz.171 Panther Ausf.A model set brings one of the most recognised World War 2 tanks into a 1:56 scale build with a compact footprint and a sharply defined military profile. Sloped front armour, the long-barrelled 75 mm KwK 42 gun and the Panther Ausf.A configuration give the finished tank a silhouette that stands out on a shelf, in a diorama or alongside other mid-scale military subjects. The full-size Panzerkampfwagen V Panther was developed in response to the Soviet T-34 and KV-1 on the Eastern Front, where German Panzer III and Panzer IV tanks had been outclassed in performance and armament. Its 700 horsepower V-12 Mayback engine supported the mobility that made the Panther effective across several theatres, while the inclined frontal armour formed a key part of its defensive layout. Those historical reference points give the build more than shape alone, linking the model to a specific stage of armoured vehicle development during the war. On a worktable, the 1:56 format keeps the project manageable while still leaving room for the Panther's defining lines and gun proportions to read clearly. Once completed, the tank fits naturally into World War 2 displays focused on the Eastern Front, Italy or France, and the 14 years marking places it within a more advanced model-building range. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Panzer Kpfw. IV Model Kit 1:72 Scale
510007007€17.99
Italeri Panzer Kpfw. IV is a 1:72 scale assembly kit that brings one of the most widely used German tanks of the 2nd World War into a compact 8.5 cm finished model. The small scale keeps the build manageable on a workbench while still leaving room for the long gun, tracked running gear and angular hull lines that define the vehicle's silhouette. The subject reflects the Panzer IV as a better protected design armed with a 7.5 cm cannon, developed after the limits of the earlier Model III became clear against opposing armour such as the Soviet T-34. Italeri presents that history through a build that moves from separate moulded parts to a complete armoured vehicle with turret, road wheels, side armour elements and surface details. The included assembly kit format suits careful step-by-step construction, and the stated 600-minute assembly time signals a project with room for painting, fitting and finishing rather than a quick snap build. Decals for 1 version complete the model with the markings needed for the final scheme. On the bench, the 1:72 format fits neatly into diorama scenes, military collections or a line-up of historical vehicles without taking much space. The finished Panzer Kpfw. IV also works as a focused display piece, where the compact dimensions make the camouflage, turret profile and track layout easy to place on a shelf or in a cabinet.
Model tanks
Italeri Panzerkampfwagen 35(t) Model Kit 1:72
510007084€16.99
Italeri Panzerkampfwagen 35(t) Model Kit 1:72 brings an early-war light tank into a compact scale build with a finished model length of 6.8 cm. The detailed plastic kit captures the distinctive profile of the Czechoslovakian LT vz.35 in German service, including the turreted gun layout, tracked running gear and riveted vehicle form that define this historic design. The subject reflects a tank developed during the 1930s and later redesignated Panzerkampfwagen 35 (t), with the letter t marking its Czechoslovakian production origin. In service, the full-size vehicle carried 2 machine guns and a 37 mm gun, details that shape the character of the miniature build and its period-correct silhouette. The kit also includes 1 figure, which adds a human scale cue when placed with the open hatch area or within a small scene. Decals for 4 versions widen the finishing options and support historically varied markings across different operators. On a workbench, the 600 minute build time gives space for careful assembly, painting and decal application rather than a quick snap-together result. Once completed, the 1:72 scale format sits neatly in military collections, on diorama terrain or alongside other period vehicles where the compact footprint keeps historical scenes easy to arrange. Radio gear, a battery pack, a charger and paints are required separately.
Catalogues & merchandise
Italeri Paper Shopper Medium 32 x 40 x 13 cm
510009078€1.29
The Italeri Paper shopper medium combines a clean white paper finish, bold front printing, and a practical 32 x 40 x 13 cm format for carrying modelling purchases with a clear branded look. Twisted paper handles sit neatly at the top and give the bag a straightforward hand-carry grip for shop collections, events, or gift presentation. The front design centers on the Italeri logo, including the stylized red and green emblem, black aircraft silhouette, and the line modellismo in scala dal 1962 as printed on the bag. Beneath it, a 3 x 3 grid adds visual detail with illustrated references to different modelling subjects, including aircraft, helicopters, trucks, soldier figures, motorcycles, military vehicles, ships, and classic cars. That printed layout gives the shopper a strong connection to the wider scale modelling world rather than a plain unmarked carrier. Used at a hobby event, in a retail setting, or for handing over a model-related gift, the medium format offers a tidy way to carry supplies while keeping the Italeri identity visible. The rectangular shape fits naturally into counter, shelf, and takeaway use where a branded paper bag suits the occasion.
Military figures & accessories
Italeri Pavlosky Russian Grenadiers 1:72
510006006€10.99
Italeri Pavlosky brings the Russian Grenadiers Regiment of the Napoleonic Wars into 1:72 scale with a formation shaped for historical modelling and battle scene building. The set centres on the infantry regiment associated with Czar Alexander's army, with figure styling that reflects the tall appearance described for these soldiers and the distinctive caps with frontal brass plaque. The box contains 50 figures, giving broad scope for arranging ranks, advancing lines, or concentrated battlefield groups across a diorama base. The regiment's historical record links it to Austerlitz, Eylau, Friedland, and Borodino, which opens several authentic scene directions within one set rather than limiting the figures to a single engagement. That range of battle references supports both compact displays and larger Napoleonic layouts where troop identity needs to read clearly at a glance. The 1:72 scale also fits naturally into established military miniature collections built around period armies and campaign settings. On a workbench, the figures lend themselves to careful painting of uniform details and organised unit placement. In a display cabinet or diorama setting, the repeated infantry format helps create disciplined formations that echo parade order, marching movement, or front-line opposition to Grande Armee troops.
Model tools
Italeri Pin Vice Hand Drill with 5 Bits
510050831€13.99
The Italeri Pin Vice brings controlled hand drilling to fine model and craft work with a double-ended metal body, a swivel top and 5 included drills. In the hand, the compact tool supports slow, deliberate rotation, making it easier to open neat holes in small parts where close control matters more than speed. The double-ended construction keeps 2 drill sizes ready in the same tool, which helps when a build moves between pilot holes and wider openings. Its knurled grip gives the fingers a firmer hold during repeated turns, while the swivel top stays planted against the palm or fingertip to guide pressure as the bit cuts. This manual setup suits delicate materials and small-format components that benefit from measured drilling rather than fast motorised force. Assembly is required and takes 600 minutes. On the workbench, the Italeri Pin Vice fits naturally into scale model preparation, part correction and detail work. It can be used to open mounting points, refine alignment holes or prepare surfaces for added components, making it a useful tool for careful, step-by-step bench sessions.
Model tools
Italeri Plastic Modelling Tool-Set Hobby Kit
510050815€19.99
Italeri Plastic Modelling Tool-Set brings the core bench tools for detailed plastic kit work into one focused set. Side cutters, a precision craft knife, a flat metal file and a blue cutting mat support the careful rhythm of separating parts, refining edges and preparing pieces for assembly at the workbench. The side cutters are suited to removing small components from sprues with controlled snips, while the craft knife handles close trimming, scoring and fine cleanup around edges and attachment points. A spare blade case adds replacement blades for continued use. The flat metal file helps refine cut areas after removal, which is useful when parts need a cleaner contact surface before joining. Printed measurement lines and angle guides on the cutting mat add a practical reference for alignment and repeatable cuts during model preparation. Assembly is required, with a stated assembly time of 600 minutes. The set suits longer build sessions where several tools need to stay within reach, whether parts are being cut from the frame, edges are being cleaned up, or measured trimming is part of the next step. Recommended age: 14 years
Model car kit
Italeri Porsche 956 Jägermeister Model Kit 1:24
510003678€37.99
The Italeri Porsche 956 Jägermeister model kit in 1:24 brings one of the defining endurance racers of the 1980s to the workbench, combining the long, low Group C silhouette with the vivid orange livery that made this car instantly recognizable on track. The subject comes directly from the Porsche 956 family, a racing design developed to balance power, reliability and aerodynamics for long-distance competition. The original car used an aluminum monocoque chassis and rear-wheel drive, a layout that helped shape its focused proportions and competition stance. Power came from a 2.65-liter twin-turbo Porsche engine delivering over 600 hp, while the aerodynamic bodywork supported speeds above 350 km/h. Those full-scale engineering details give the finished 1:24 replica its depth, turning the build into more than a body shell with markings. On a shelf, in a display case or alongside other motorsport subjects, the Porsche 956 Jägermeister stands out through its racing history as much as its color scheme. The 14 Years and up marking places this kit in a range suited to builders looking for a classic endurance car with a strong period identity and a clear connection to Group C competition. Warning! Not suitable for children under 14 years.
Model tools
Italeri Precision Tweezer Curved Hobby Tool
510050813€5.99
The Italeri Precision Tweezer, curved is a hobby tool built for close, exact handling during model work. Its slim metal form and fine curved tip help guide small parts, decals and delicate detail pieces into place with more control than fingertips allow, especially when working around tight edges and narrow gaps. The pointed ends are shaped for careful pickup and repositioning, which is useful when aligning tiny components on scale builds or lifting pieces from sprues and work surfaces. The curved profile changes the approach angle at the tip, making it easier to see the placement area while keeping the hand slightly clear of the part being handled. A clear protective cap covers the tip during storage, helping protect the fine point between sessions. The pack contains 1 curved precision tweezer. 600 minutes assembly time is stated in the product data. On the workbench, the tool suits tasks such as placing decals, adjusting small fittings and moving fine components into exact position during detailed model assembly. It also works well for careful correction when a part needs to be lifted and set again before the build moves on to the next stage.
Model tools
Italeri Precision Tweezer Straight Hobby Tool
510050814€5.99
Italeri Precision Tweezer, straight (1) brings a focused tool shape to detailed model work, with a long straight metal form and pointed tips that help guide small parts into place. In miniature assemblies, decals, fine wire and tiny fittings often need a more exact grip than fingertips can provide, especially when working around narrow joins and closely spaced details. The straight profile keeps the working angle direct, which helps when aligning parts on flat surfaces or reaching into confined sections of a build. Pointed ends support careful pickup and placement of photo-etched parts and other small components that can shift easily during handling. The metal construction adds the firm feel needed for repeated use across longer bench sessions. Assembly time is stated as 600 minutes. That makes precise handling especially relevant when a build moves through many separate fitting, positioning and finishing steps. On the workbench, this tweezer suits tasks such as setting a small detail into adhesive, adjusting a fine piece before it sets, or moving a delicate part into a tight spot without covering the area by hand. Italeri marks this tool for ages 14 Years and up.
Model tools
Italeri Professional Cutter Flush Cutter Tool
510050828€13.99
The Italeri Professional Cutter is a flush cutter tool built for close, accurate trimming in model and craft work. Black metal cutting jaws meet at the edge for neat separation of photo-etched parts, thin wire and plastic, giving small components a cleaner start before test fitting, gluing or painting. Its spring action reopens the cutter after every squeeze, which keeps repeated cuts moving smoothly during long assembly sessions. The blue insulated grips add a secure hand position for controlled pressure when working on narrow sprue gates or fine attachment points. The product data states assembly is required, with an assembly time of 600 minutes, and the 14 Years age marking places it with more detailed hobby tasks rather than quick casual use. On the workbench, the Italeri Professional Cutter suits the stage where parts need to come free cleanly and edges need less follow-up trimming. It can be used while preparing plastic kit components, shortening thin wire to length, or separating small etched details before placement, helping keep the build process precise and orderly.
Model tanks
Italeri Pz.Kpfw. III Ausf. J/L/M/N Model Kit
510025757€21.99
Italeri Pz.Kpfw. III Ausf. J/L/M/N is a 1:56 plastic model kit that recreates one of the central German medium tanks of the early Second World War in a compact display scale. The build combines a detailed hull, a separate turret and a full tracked running gear, so the finished tank carries the layered look of the original vehicle with road wheels, drive elements and a long gun profile. The kit contains 89 parts and supports several version-specific configurations across Ausf. J, L, M and N, using alternative components for details such as the gun assembly, upper hull fittings and side protection layouts. Decals for 4 versions broaden the finishing options, while the included figure adds extra character on selected builds through the open hatch position shown in the instructions. The source material also reflects the Panzer III's wartime development, from early 37 mm armament to later guns up to 75 mm, which helps place the different variants in their historical context. With a stated assembly time of 600 minutes, this kit suits builders who enjoy a longer bench session with painting, marking and variant choices shaping the final result. Glue, paints and tools are required separately. Once completed, the 1:56 scale format works well for shelf display, historical collections or integration with other military miniatures in the same scale. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Pz.Kpfw.V Panther 1:72 Model Kit
510107504€17.49
Italeri Pz.Kpfw.V Panther brings the Panther Ausf.G into 1:72 scale as a detailed assembly kit with 2 matching tanks, each measuring 12.7 cm when built. The compact format suits wargame tables, military dioramas, and shelf display, while the sloped hull, long main gun, and rotating turret shape give the vehicle its unmistakable WWII profile. The fast assembly layout is built around major sections such as the upper hull, lower hull, turret shell, gun barrel, rear panel, and full track-and-roadwheel side assemblies. This structure keeps the build focused on the tank's form instead of a long parts count, while still preserving molded engine deck features, hatch outlines, side-mounted tools, and running gear detail. Waterslide decals add crosses and number options for finishing, and the paint guide shows German Army camouflage references for Spring 1945. Assembly is required. Assembly time is 600 minutes. On a tabletop, the pair of Panthers can represent matching units in scenario play or anchor a late-war armored column in a compact scene. In a display setting, the 2-model format also allows different camouflage treatments on the same vehicle type, making the kit well suited to side-by-side comparison of markings, paintwork, and weathering.
Military aeroplane models
Italeri RAF EF-2000 Eurofighter Typhoon Kit
510001457€22.99
The Italeri 1:72 RAF EF-2000 Eurofighter Typhoon assembly kit turns one of the best-known modern combat aircraft into a focused scale build with a crisp canard-delta outline and a distinctly RAF finish. The subject represents the Typhoon in Royal Air Force service, a twin-engine multi-role aircraft developed by a European consortium and shaped for interception duties and high manoeuvrability. Fine recessed surface detail across the airframe helps the completed model carry the technical look of the full-size jet, while separate parts for stores and undercarriage add more depth to the build. The included marking sheet goes far beyond basic insignia, covering common stencils, AMRAAM markings, 1000 liter fuel tank markings and multiple aircraft serial options such as ZK361, ZK367, ZK343 and ZK308. That range supports different squadron identities as well as a striking display scheme, so the final finish can lean toward line-service realism or commemorative presentation. Assembly is required, and the stated build time is 600 minutes. Paints, cement and tools are required separately. On the workbench, the 1:72 scale keeps the project manageable while still leaving room for careful painting, decal placement and panel definition. Once completed, the model suits an in-flight style presentation or a parked aircraft display, with the wing shape, fin markings and external stores giving the Typhoon a strong modern fast-jet presence.
Military aeroplane models
Italeri Rafale B Aircraft Model Kit 1:72
510090092€18.99
The Italeri Rafale B aircraft model kit brings the 2-seat version of the French fighter into 1:72 scale, translating its delta wing layout and canard foreplanes into a compact build with a clear modern jet profile. As a detailed plastic kit, it centres the experience on assembling a recognisable replica of an aircraft developed by Dassault Aviation. The full-size Rafale B is powered by 2 Snecma M88 engines with afterburner and is described with performance exceeding Mach 1.8, a combination that helps explain the sharp, purposeful lines carried into the model. Its aerodynamic configuration is designed for maneuverability, while the real aircraft is configured for air-superiority, ground-attack, reconnaissance and electronic-warfare missions. The airframe can also carry air-to-air missiles, air-to-surface missiles and guided bombs, giving the subject strong operational depth beyond its silhouette alone. On the bench, the 1:72 format suits focused assembly sessions and leaves room to place the finished aircraft alongside other modern military aviation subjects. The completed Rafale B works equally well as a display piece that reflects the French Air Force connection and the aircraft's wider service with operators including Croatia and Greece.
Military aeroplane models
Italeri Rafale M 1:72 Aircraft Model Kit
510001319€15.99
Italeri Rafale M Operations Exterieures '11 brings the lines of a modern French Navy fighter aircraft into a 1:72 scale assembly kit with a finished length of 21.2 cm. The large delta wing, canard wing layout, twin engines in the tail section and single large rudder give the aircraft its distinctive profile, creating a display piece that reads clearly even before paint and markings are applied. The subject is based on the Rafale M used by the French Navy, a carrier-based variant of the fourth generation fighter aircraft produced by Dassault Aviation. The kit centers on hands-on model building, with unassembled parts that form the fuselage, flying surfaces, landing gear and external stores. Decals cover 2 versions, allowing the finished aircraft to be completed with different markings from the Operations Exterieures '11 theme. The decal sheet also adds service markings and aircraft identifiers that sharpen the finished look across the airframe. With a stated assembly time of 600 minutes, the build suits longer bench sessions focused on careful fitting, painting and final finishing. The completed model sits well in a display cabinet, on a shelf or alongside other 1:72 military aircraft, where the compact 21.2 cm format leaves room for a broader aviation lineup. Age marking: 14 years.
Model trucks
Italeri Range Rover Police Model Kit 1:24
510093661€34.99
Italeri Range Rover Police brings the Range Rover Classic into 1:24 scale as a detailed plastic kit with the unmistakable shape of the British off-road patrol vehicle. The upright body, squared profile, and service-focused character give the finished model a clear presence on a shelf or workbench while leaving room for careful painting and finishing. The full-size Range Rover Classic was built from 1970 to 1996 and became one of the defining 4x4 vehicles of its era. Its use by police departments in countryside, park, and rural patrol work gives this version a specific historical setting rather than a generic off-road theme. That background adds depth to the build, especially for collectors who enjoy service vehicles and real-world automotive subjects from the 1980s and 1990s. The 1:24 scale supports visible body details and a balanced display size, while the kit format keeps the focus on assembly, painting, and the finished replica. On a hobby desk, the model suits measured build sessions that move from body preparation to final display. Once completed, the police specification and classic Range Rover silhouette fit naturally into vehicle collections, British service scenes, or dioramas centered on patrol and utility transport. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri Reggiane Re.2002 Ariete Model Kit 1:72
510001472€19.99
The Italeri Reggiane Re.2002 Ariete model kit in 1:72 scale brings a World War II ground attack aircraft onto the workbench as a detailed assembly project with a clear historical identity. Based on the Reggiane Re 2000 airframe, the original aircraft was developed for the Regia Aeronautica with a higher-performance engine, expanded armament and the ability to carry an offensive bomb load of up to 500 kg. This assembly kit focuses on the aircraft's distinctive configuration through finely moulded parts, including fuselage sections, wing elements, propeller parts, cockpit details and underwing stores visible on the sprues. The surface engraving adds panel definition that stands out during painting and weathering, while the super decals sheet for 4 versions opens several finishing directions for the final scheme. The subject also carries a strong operational background: Re 2002 units were deployed against the Allied invasion of Sicily in 1943, and after Italy's armistice in September that year the aircraft was also used by the German Luftwaffe. Assembly is required and the stated assembly time is 600 minutes. On the bench, the 1:72 format supports careful dry fitting, painting and decal placement without demanding excessive display space once complete. The finished aircraft suits a stand-alone aviation display, a Mediterranean theatre scene or a broader Second World War aircraft lineup with Italian and German service context. Warning! Not suitable for children under 14 years.
Model trucks
Italeri Renault AE500 Magnum Truck Kit 1:24
510003969€58.99
The Italeri Renault AE500 Magnum truck kit in 1:24 scale recreates one of the most distinctive heavy commercial vehicles of its era, with the sharply cut cab shape that made the Magnum instantly recognisable on the road. Produced by Renault and introduced in 1990, the original truck stood apart through a cab structure separated from the chassis and engine compartment, a layout developed to improve onboard comfort and ergonomics during long-haul use. This detailed kit translates that character into a build with moulded cab panels, interior fittings, chassis parts and mechanical details. Seats, dashboard elements, door panels and console sections give the cab visible depth behind the large windshield, while tanks, axles, pipes and other underbody components add substance below the bodywork. Rubber tyres bring a realistic finish to the running gear, and chromed wheel parts add a bright metallic contrast at the rims. The decal sheet supports 2 versions and includes Renault badging, dashboard graphics, reflective markings and multiple European registration options for a more specific final presentation. On the bench, the mix of structural parts and finishing details supports a focused truck-model project with clear visual progression across cab, chassis and trim. Once completed, the Renault AE500 Magnum stands out in a collection through its tall cab profile, commercial-vehicle proportions and period road-haul styling. 14 Years is the stated minimum age. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri RF-4 C/E Phantom II Model Kit 1:72
510001477€31.99
The Italeri RF-4 C/E Phantom II model kit in 1:72 scale brings a dedicated reconnaissance aircraft to the workbench, shaped by the lines of the McDonnell Douglas F-4 Phantom II and defined by its reworked forward fuselage. That nose configuration housed photographic and terrain-scanning systems, giving this version a distinct profile that stands apart from fighter-based Phantom variants. The subject represents an aircraft developed for observation and intelligence-gathering missions, including demanding flights over enemy territory. The RF-4C was used extensively during the Vietnam War, and its long service life continued through repeated avionics, photographic and data-gathering upgrades until the late 1990s in the United States Air Force and other allied countries. That background gives the build a clear historical setting and supports display choices rooted in a real operational role rather than a generic jet outline. As a detailed plastic kit, it suits builders aged 14 years and up who want a compact aircraft project with a strong Cold War identity. The finished model fits naturally into military aviation collections, desk displays or shelf lineups focused on reconnaissance aircraft, Vietnam-era subjects or the wider Phantom family. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri RF-4E Phantom II Aircraft Kit 1:48
510002818€38.99
The Italeri RF-4E Phantom II brings a Cold War reconnaissance aircraft into 1:48 scale with the long, twin-seat profile and sensor-focused configuration that set this version apart from the standard fighter. As an assembly kit, it centres the build on the unarmed RF-4E variant, which combined the reconnaissance system of the RF-4C with the F-4E airframe and engines. The subject itself adds depth to the finished model. The real RF-4E entered service with the German Luftwaffe in the early 70s and was also used by Japan, Iran, Israel and Greece, giving the aircraft a broad operational history across several air forces. Cameras installed in the bays, infrared sensors and a target-looking radar system defined its all-weather reconnaissance role, and that specialist identity shapes the character of the model. The included decal sheet reflects that international service with markings, serials, national insignia and cockpit instrument details that help distinguish different versions. On the bench, the 600-minute assembly time points to a substantial aircraft project rather than a quick snap-together build. The finished jet suits display settings such as a runway scene, an airbase diorama or a line-up with other 1:48 military aircraft, where the landing gear, external tanks and surface markings can be fully appreciated. Paints, tools and cement are required separately.
Model car kit
Italeri Rolls Royce Phantom II Model Kit 1:24
510003703€32.99
Italeri 1:24 Rolls Royce Phantom II captures the long, elegant lines of a historic luxury car in a buildable scale model with a finished length of about 235 mm. The subject is the P-2 series version built in 1934, based on an original car preserved at the Stratford Motor Museum in England, which gives the build a clear historical reference as the body, fenders and front-end details come together. The kit is supplied as an assembly set and is marked for ages 14 years and over. Its structure goes beyond a simple shell, with separate chassis and body sections, layered wheel assemblies, interior fittings, steering components, lamps, bumper parts and side trim that build up the character of the car step by step. The instructions also show alternative positioning for the side window elements and an alternative rear upper configuration, so the finished model can take on different period-correct body details. Assembly is stated at 600 minutes. Paints and cement are required for completion. On the worktable, the 1:24 scale gives enough room for careful handling of the classic proportions, from the long bonnet to the open touring layout. Once completed, the model suits display in a collection of historic automobiles, where the 1929 Phantom II design and the 1934 P-2 series reference stand out through their distinctive pre-war styling.
Model figures
Italeri Roman Infantry 1:72 Figure Model Kit
510006021€10.99
Italeri Roman Infantry Ist-IInd cent. brings the structure of a Roman legion into 1:72 scale with an assembly kit centered on standardized troops from the period after the Marian reform. The set contains 34 infantry figures and 1 horseman, giving enough bodies to arrange a marching file, a formed line or a command-focused scene with visible rank contrast. Historical detail drives the sculpting. Centurions are marked out by leg guards, a vine-stick and a helmet with a transverse crest, while the legionnaires wear lorica hamata reinforced on the shoulders. Semi-rectangular shields define the look of the formation and help create the dense visual rhythm associated with Roman infantry. The equipment layout also reflects the period described in the set: 2 throwing pila, the gladius and the pugio complete the armament carried by the soldiers. The unassembled parts arrive as a model kit intended for builders aged 14 Years and up, with an indicated assembly time of 600 minutes. On the workbench, the figure mix supports careful painting of armor, shields and command markings across a larger group rather than a single display piece. Once assembled, the set suits historical dioramas, tabletop army scenes or shelf displays that focus on Roman military organization, equipment and formation drill.
Model figures
Italeri Roman Infantry 1st Century Model Kit
510006047€10.99
The Italeri Roman Infantry 1st Century model kit brings a defining Roman legion look into 1:72 scale with 35 figures shaped for historically themed army scenes. Tunics, armour, shields, swords, and javelins create the visual language associated with Roman infantry, whether the figures are arranged in a compact advance across open ground or spaced through a wider battlefield layout. The set draws on the equipment of the 1st Century B.C. legionnaire, including the lorica segmentata worn over the tunic and the rectangular scutum linked to legion identity. Alongside standard infantry, the composition adds centurions with transverse crest helmets and a signifer carrying the Legion's insignia, so command and standard-bearing roles are present within the same box. This gives the finished group more than a single troop type and helps a diorama show hierarchy, movement, and military organisation. The assembly kit format also leaves room for painting choices across shields, armour, tunics, and insignia. On a shelf, in a cabinet, or as part of a larger ancient battle scene, the 1:72 scale works well for combining multiple units into one coherent display. Assembly time is 600 minutes. The box contains the assembly kit with 35 figures, creating a substantial historical modelling project with a clear Roman military focus.
Model brushes
Italeri Round Brush 0 Synthetic Brown Brush
510051285€3.29
Italeri Round Brush 0 Synthetic brown is a fine detail brush shaped for controlled painting work on small model surfaces. The round size 0 profile and pointed synthetic brown bristles support careful paint placement where narrow edges, recessed sections and tiny accents need a clean, deliberate stroke. The long handle and slim overall form shown in the data give the hand room to settle into a steady grip during slower finishing work. Within model making, a brush at this size suits jobs that broader heads cannot reach cleanly. The round tip can carry small amounts of paint into panel lines, trim sections and compact raised details, while the synthetic bristles help maintain a defined point through repeated short strokes. The data identifies this version as an assembly kit component and gives an assembly time of 600 minutes, placing it alongside longer build sessions where painting is part of the final finish rather than a quick add-on. Used after core construction, the brush supports touch-ups, edge work and careful colour separation on miniatures and scale builds. The 14 Years age marking fits hobby use that calls for patience, close control and a measured painting pace across detailed surfaces.
Model brushes
Italeri Round Brush 0 Synthetic Detail Brush
510052203€1.69
Italeri Round Brush 0 Synthetic is a detail brush shaped for careful paint application on small sections, fine edges and narrow lines. The size 0 format and pointed round tip support controlled placement, whether the task is picking out surface details, refining borders or adding small accents to a model finish. The synthetic bristles are paired with a metal ferrule and a slim handle, creating a straightforward tool for hobby painting where a clean tip matters. The round profile allows different stroke widths depending on angle and pressure, so the point can handle fine line work while the side of the bristles can cover slightly larger spots. The visible handle design in dark blue and the silver ferrule give the brush a clear studio and workbench character that fits neatly into a model painting setup. On the bench, this brush suits slow, deliberate work such as retouching corners, tracing panel details or applying paint to tight sections that broader brushes can miss. Assembly kit required, assembly time 600 minutes, minimum age 14 years
Model brushes
Italeri Round Brush 0 Synthetic Paintbrush
510051203€1.39
Italeri Round Brush 0 Synthetic brings a fine pointed brush shape to detailed painting tasks where controlled placement matters. The size 0 round format supports narrow strokes, careful edging and small painted sections, while the synthetic bristles keep the tip defined for close work on models, miniatures and craft surfaces. The slim brush profile shown in the product data pairs a light blue handle with a silver ferrule and orange-brown bristles. That combination gives the hand a clear visual reference near the tip when working around tight contours or small recessed areas. A round brush shape also changes naturally with pressure, so the same brush can place a thin line with the point or widen coverage slightly across tiny sections that need a smooth coat. The long handle adds reach and control during seated bench work, especially when the brush is guided in short, repeated movements. This brush fits painting sessions that move between base touch-ups, edge definition and fine finishing on compact parts. The product data states 14 Years+ and lists assembly required with an assembly time of 600 minutes. Included components are listed as assembly kit.
Model brushes
Italeri Round Brush 0/10 Synthetic Brown
510051281€2.79
Italeri Round Brush 0/10 Synthetic brown is a fine hobby brush shaped for detail painting, where a narrow pointed tip helps place paint on small sections, edges and delicate surface features. The synthetic bristles and slim brush profile support controlled strokes during model finishing, touch-ups and other careful paintwork that calls for accuracy rather than broad coverage. The long handle and metal ferrule give the brush a familiar, steady painting format that suits slow line work and close visual control. In the product image, the light blue handle, silver ferrule and brown bristles create a clean workshop look that matches precision-focused use on miniatures and small assemblies. The 0/10 size points to very fine application, making the brush suitable for narrow outlines, tiny painted accents and other exacting areas where a larger brush would lay down too much paint. Assembly is required, and the data states an assembly time of 600 minutes. On a model bench, this brush supports the final painting stages after construction, when small parts, edges and finishing details need a lighter touch. It also fits craft and hobby sessions that rely on thin lines, restrained paint pickup and careful hand guidance across compact surfaces.
Model brushes
Italeri Round Brush 0/5 Synthetic Brown
510051282€2.99
Italeri Round Brush 0/5 Synthetic Brown is a fine detail brush shaped for careful paint application on assembly kit surfaces. The round head and pointed brown synthetic bristles support controlled strokes in tight sections, whether the work focuses on panel lines, trim, small parts or narrow painted accents. Its slim form suits close handling where precision matters more than broad coverage. The synthetic bristle tip is suited to measured line work and small touch-ups, giving model builders a dedicated tool for areas that need accuracy rather than heavy paint load. A long handle adds reach and balance during bench work, while the metal ferrule secures the bristles between handle and tip. The 0/5 size places this brush in the extra-fine end of a painting setup, where tiny details, edges and recessed sections need a narrower contact point. Assembly is required for the kit project this brush is intended to finish, with an assembly time of 600 minutes. On a workbench beside paints and a partly finished model, this brush fits the stage where markings, cockpit details, trim lines or small corrections bring the surface together. It also suits miniature painting and other careful hobby applications that call for a fine round tip and steady, deliberate brush control.
Model brushes
Italeri Round Brush 00 Synthetic Detail Brush
510052202€1.59
Italeri Round Brush 00 Synthetic is a fine detail brush built for careful paint application on small areas, narrow edges and precise decorative work. The round profile and pointed 00 tip support controlled strokes when a painted surface calls for accuracy rather than broad coverage. Synthetic bristles form the working end of the brush, while a silver metal ferrule keeps the tip compact and neatly shaped. The slim handle format sits naturally in the hand during close work and suits steady movement across corners, recessed sections and fine outlines. This makes the brush a practical choice for model painting, touch-ups and other hobby tasks where a larger brush would place too much paint at once. On a workbench, the brush fits naturally into painting sessions that move between base colours, small corrections and final accents. It can be used for careful line work, edging and picking out compact details on scale builds and craft projects where a sharp point and measured paint flow matter.
Model brushes
Italeri Round Brush 000 Synthetic Detail Brush
510051201€1.09
Italeri Round Brush 000 Synthetic is a fine detail brush shaped for controlled painting on small model sections. The long, slim handle, silver ferrule and pointed synthetic bristle tip create a precise painting tool that suits narrow lines, tiny edges and careful colour placement where broader brushes would cover too much surface. The 000 size focuses on detail work rather than large-area coverage, making it useful for markings, trim, recessed contours and small finishing touches. Synthetic bristles keep a defined point for close work and support measured paint application on miniature parts and hobby surfaces. The tapered handle adds balance in the hand, which helps when guiding short strokes around corners, panel edges or other compact painted areas. The product data lists an assembly kit designation, a 14 Years age marking, and an assembly time of 600 minutes. On a workbench, this brush fits tasks that call for accuracy over speed, such as refining painted borders, adding small accents or reaching tight spots on a model. It also suits craft and miniature painting setups where a very fine tip is needed for neat, deliberate brush control.
Model brushes
Italeri Round Brush 000 Synthetic Paintbrush
510052201€1.49
Italeri Round Brush 000 Synthetic brings a fine pointed painting tool to close-detail hobby work, with a round size 000 tip shaped for narrow lines, tiny sections and careful finishing passes. The synthetic bristles and slim brush format support controlled paint placement when small model parts or compact painted areas need a steady hand. The round head concentrates the brush to a sharp point, which helps when tracing edges, reaching recesses or adding small accents that broader brushes cannot place cleanly. A silver metal ferrule secures the bristle section to the handle, while the dark blue handle keeps the overall shape clear and easy to position during detailed work. The product data states assembly is required and gives an assembly time of 600 minutes. The 14 Years marking is also provided in the data. On a workbench, this brush suits careful sessions with miniature surfaces, trim lines and touch-up areas where paint needs to stay exactly within the intended section. It also fits craft and model painting setups that rely on a very small round tip for precise, measured strokes rather than broad coverage.
Model brushes
Italeri Round Brush 1 Synthetic Paintbrush
510051204€1.59
Italeri Round Brush 1 Synthetic is a fine paintbrush shaped for precise model painting, with a slim round profile, a pointed orange-brown bristle tip and a long light-blue handle that gives a clear visual line from grip to brush point. The synthetic bristles suit controlled paint placement on small areas where a broader brush would spread colour too far. The silver ferrule secures the bristle head to the handle and keeps the working end compact, which helps when following panel edges, picking out trim or adding narrow painted accents. The round size 1 format is well suited to detail-led hobby work, especially where a clean point matters more than broad coverage. The single-brush pack keeps the setup straightforward for focused painting tasks, and the product data states a minimum age of 14 Years. Assembly kit is listed among the included components. On a workbench, the pointed tip supports careful brush control across miniature parts, model surfaces and other small sections that need a measured amount of paint. It also fits touch-up work between larger painting stages, where a narrow round brush can reach corners, outlines and fine edges with more accuracy than a wider shape.
Model brushes
Italeri Round Brush 2 Synthetic Paintbrush
510051205€1.69
Italeri Round Brush 2 Synthetic is a fine paintbrush shaped for detailed model finishing, with synthetic bristles, a pointed round tip, a slim handle and a metal ferrule. The narrow brush head supports controlled paint placement on small sections, making it suited to careful work around panel lines, trim details and other tight painted areas. The round profile helps guide short strokes and small paint loads where broader brushes would cover too much surface at once. Synthetic fibres make this brush a practical choice for repeated hobby use with common model paints, while the pointed tip supports touch-ups, edging and detail accents that need a more exact approach. The long handle gives extra reach and a steady grip during seated bench work, and the ferrule keeps the bristle bundle neatly formed at the tip. On a modelling table, Round Brush 2 fits naturally into paint sessions that move between base colours, corrections and fine finishing passes. It can be used when adding small colour separations, refining painted borders or working into narrow recessed sections on scale models. Assembly kit contents are listed in the data, and the stated assembly time is 600 minutes.
Model tanks
Italeri RSO/PaK 40 1:35 Plastic Model Kit
510000355€33.49
The Italeri RSO/PaK 40 in 1:35 scale brings a distinctive tracked anti-tank vehicle into model form, combining the compact Raupenschlepper-Ost chassis with the long 7.5 cm PaK40 cannon. The open fighting compartment, angular shield plates and low hull give the finished replica the unmistakable silhouette of a wartime field conversion built for demanding Eastern Front conditions. The full-size vehicle was developed from the Wehrmacht's tracked tractor series, created to handle transport and towing duties in harsh terrain while moving loads such as ammunition and supplies. Steyr built most RSO vehicles and also developed this anti-tank version as a simple, cost-effective fighting machine. That background gives the model a strong historical identity beyond its gun profile alone. The kit's glueable rubber tracks reproduce the continuous tracked layout that made the RSO suitable for rough ground, while the included new decals sheet allows 3 different finishing versions drawn from 1944 and 1945 service markings. On the workbench, the combination of tracked running gear, armored gun shield and long barrel creates a build with clear mechanical character in every stage. Once painted and marked, the model suits military dioramas, historical vehicle collections and shelf displays that focus on late-war armored support vehicles. Recommended age: 14 years and up. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri S.79 Sparviero Aircraft Model Kit 1:72
510001290€22.99
The Italeri S.79 Sparviero brings the distinctive lines of a 3-engined Italian aircraft into 1:72 scale, with a finished model length of 22.5 cm that gives the airframe a clear shelf presence. As an assembly kit, it turns the aircraft's slim fuselage, broad wing layout and tri-motor arrangement into a build that stays closely tied to the original form. The 65-part layout gives the project enough depth to keep each stage engaging, from the main airframe sections to the landing gear and propeller assemblies. Internal cockpit elements add extra structure inside the fuselage before the outer shape comes together. Alternative parts around the upper fuselage and cockpit area allow a different configuration during the build, and the decal sheet for 1 version adds the finishing markings that define the final appearance. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the 1:72 format keeps the model manageable while still leaving room for careful painting, decal placement and detail work. Once completed, the S.79 Sparviero fits naturally into a historic aircraft collection, a World War II aviation display or a line-up of classic scale model bombers and torpedo aircraft.
Military ship models
Italeri S.L.C. Maiale 200 Model Kit with Crew
510005621€28.99
The Italeri S.L.C. Maiale 200 model kit with crew brings a rare World War II naval subject into 1:35 scale, combining the long cylindrical hull of the Siluro a Lenta Corsa with 2 operators positioned for an unmistakable underwater mission scene. As an assembly kit, it focuses on the distinctive form of the manned torpedo, from the exposed rear propulsion area to the compact upper structures that define the craft's profile. The subject is rooted in the Italian Regia Marina program developed by Teseo Tesei and Elios Toschi in 1935, and the finished model reflects that unusual engineering concept through its guided underwater layout. The original craft used batteries to power an electric motor and carried 2 operators equipped with respirators, details that give the build a strong historical identity beyond a standard naval vehicle. Italeri also equips this release with photo-etched parts and decals for the Italian version, adding finer finishing work to selected sections. The option to depict the S.L.C. 227 enhanced warhead version broadens the historical configuration shown on the display base or shelf. A stated assembly time of 600 minutes suits a measured, detail-led build session, with painting and decal placement adding further definition to the hull, console and crew. The completed 1:35 model sits naturally in military and naval collections, and the 2 figures help frame the craft in a way that suggests stealth movement below the surface rather than a standalone torpedo form. Recommended age: 14+
Military aeroplane models
Italeri S.M.79 M Sparviero Aircraft Kit 1:72
510001412€29.99
Italeri S.M.79 M Sparviero brings a well-known 1930s and Second World War aircraft into 1:72 scale as a detailed assembly kit. The finished subject stands out through the characteristic hump behind the cockpit, the low-wing layout and the 3-engine configuration that made the Sparviero instantly recognizable in period service and in aviation collections. Originally created by SIAI-Marchetti as a civilian aircraft, the S.M.79 later served the Regia Aeronautica in bomber and torpedo-bomber roles across the Mediterranean theatre. The original aircraft used a structure of wood, canvas and metal, a combination that helps explain its distinctive form and historical character. Power on the full-size aircraft came from 3 Alfa Romeo 126 RC34 radial engines rated at 750 HP each, and the type could reach 430 km/h. This background gives the build a clear technical identity beyond its camouflage and markings. The kit includes an assembly set, instructions and decor, with markings for 6 versions to support different finishing directions. Assembly is required, with a stated build time of 600 minutes. Once completed and painted, the model suits shelf display, diorama use or a focused aircraft-building session centered on an Italian wartime design with a strong historical profile.
Military figures & accessories
Italeri Sand bags model accessory kit 1:35
510000406€9.49
Italeri 1:35 Sand bags is an assembly kit for adding fortified detail to military dioramas and static model scenes. The set works at 1:35 scale and provides 48 pieces that can be stacked into low walls, curved barriers or compact defensive positions, creating a clear visual break between open ground and protected space. The grey moulded parts are supplied on sprues and support a layout that can be adapted to the scene rather than fixed to one shape. Straight runs can frame a trench edge, while tighter groupings can define bunker approaches, checkpoints or sheltered firing points. Because each section is assembled separately, the finished arrangement can follow corners, arcs and uneven terrain more naturally than a single solid casting. The 600 minute assembly time points to a build centred on repeated placement and composition, where spacing and overlap influence the final look of the fortification. On a display base, the stacked forms add height changes and foreground structure around vehicles, figures or buildings in the same 1:35 scale. Painted in earth tones and weathered to match surrounding ground cover, the sandbag sections help tie roads, ruins and defensive positions into one coherent battlefield setting.
Model trucks
Italeri Scania 142H 6x2 Canvas Model Kit 1:24
510090762€77.99
The Italeri Scania 142H 6x2 Canvas model kit brings a classic 1980s long-haul truck into 1:24 scale with a detailed build centered on one of Scania's most recognisable commercial vehicles. The combination of the tall cab, 3-axle 6x2 layout and canvas-covered cargo bed gives the finished truck a strong road-going silhouette that stands apart from standard tractor units. The full-size Scania 142H marked an important phase in European industrial vehicle design, and this kit focuses on the version with a curtain-sided transport body developed on the 142H platform. That body style became widely used across industrial logistics, which gives the finished replica a clear working-truck identity rather than a purely show-truck look. The original vehicle was known for its V8 engine, a defining part of the 142H story, and that heritage shapes the character of the model. The 6x2 configuration also reflects the stability and load-carrying layout that made this truck format notable in long-distance transport. On the workbench, the build offers a focused truck-modelling project with the visual contrast of cab, chassis and covered cargo section. Once assembled, the model fits naturally into classic commercial vehicle collections, 1980s transport displays or shelf line-ups built around European truck history. Age 14+ Warning! Not suitable for children under 14 years.
Model trucks
Italeri Scania 164L Topclass Model Kit 1:24
510003922€70.99
The Italeri Scania 164L Topclass captures a landmark heavy commercial vehicle from the Series 4 era in 1:24 scale, turning the long-haul tractor unit into a detailed build with a finished length of 24.2 cm. The high-roof Topclass cab, shaped for comfort on the road and at rest, gives the model a strong silhouette that stands out in a display line of modern trucks. This assembly kit centers on the character of the full-size Scania 164, a truck known for its 16-litre engine and its role as a flagship design from the late 1990s into the following decade. The bodywork reflects the aerodynamic restyling of the original vehicle, while the show-truck presentation opens room for careful paintwork, trim placement and finishing choices. An adhesive stencil is included for sharper masking work during painting. Assembly time is stated as 600 minutes. Paints are required separately. On the bench, the model suits builders who enjoy working through cab surfaces, trim sections and wheel details step by step. Once completed, the Scania 164L Topclass fits naturally into a truck collection, a transport diorama or a dedicated shelf display where the tall cab, road-focused proportions and decorated finish can be seen from multiple angles.
Military ship models
Italeri Schnellboot Typ S-100 PRM Edition 1:35
510005603€194.99
The Italeri Schnellboot Typ S-100 PRM Edition captures the distinctive shape of the late-war German fast attack boat in a large 1:35 scale format. With a finished length of 99.9 cm, the model gives the narrow hull, raised armoured bridge and long deck arrangement the space needed to read clearly from bow to stern. This assembly kit combines an 85-piece build with a die-cast metal hull and added photo-etched components for finer structural detail. The subject itself reflects the S-100 type, a development of the Schnellboot line with an enclosed armoured deckhouse introduced in response to low-flying air attack. Historical references in the kit material place these boats in coastal operations around the British Isles as well as in the Mediterranean and Black Sea. Decals for 1 version support a defined finishing scheme rather than a generic look, which helps the completed model carry the character of a specific wartime configuration. The long format and visible deck equipment make this naval build especially effective on a shelf, workbench or in a collection focused on World War II vessels. A stated assembly time of 600 minutes suits builders who want an extended project with painting, detailing and final marking placement as part of the finished result.
Model tanks
Italeri Sd. Kfz. 10/4 Model Kit with FlaK 30
510006395€33.49
The Italeri Sd. Kfz. 10/4 with FlaK 30 and crew brings a World War II half-track and anti-aircraft gun together in 1:35 scale, creating a build that combines vehicle detail, weapon placement and figure composition in one scene. The reinforced rear platform carries the 20 mm FlaK 30, giving the model its distinctive silhouette and a clear mechanical focal point during assembly. This detailed kit is based on the Sd.Kfz. 10/4 configuration used for mobile close-range air defense and infantry support. The half-track layout reflects the full-size vehicle's role across mixed terrain, while the mounted gun and crew arrangement open up several display directions once painting and markings are complete. The set includes 4 figures, which can be positioned to suggest operation, coordination or movement around the platform. A decals sheet for 4 versions adds further finishing variety, and the link-and-length tracks help define the characteristic running gear of this military vehicle. On a shelf, in a diorama or as part of a wider 1:35 military collection, the Sd. Kfz. 10/4 stands out through the contrast between compact tractor unit, open rear deck and elevated FlaK 30 mount. The combination of vehicle, weapon system and crew gives the finished model a strong field-deployment presence with multiple staging possibilities. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Sd. Kfz. 182 King Tiger Model Kit 1:72
510007004€16.49
The Italeri Sd. Kfz. 182 King Tiger model kit brings one of the best-known WWII heavy tanks into a compact 1:72 scale format with a finished length of 11.2 cm. Its long 88 mm cannon, broad turret form and tracked layout give the build a strong battlefield profile that reads clearly even in a smaller scale display. The assembly kit is built around multiple sprues with separate armour sections, running gear parts, grilles and exterior details. Road wheels and sprockets shape the dense lower hull area, while turret-mounted fittings and hull tools add visual depth across the finished tank. A decal for 1 version supports a defined marking option rather than a generic finish. The source vehicle was known for heavy armour, a complex suspension system and a maintenance-prone engine, and those design characteristics inform the model's distinctive structure and stance. Assembly time is stated as 600 minutes, making this a substantial bench project rather than a quick build. During painting and finishing, the 1:72 scale works well for compact military scenes, shelf display or a line-up with other armoured vehicles from the same period. The finished King Tiger suits builders who enjoy careful part placement, measured paintwork and the visual contrast between flat armour plates, turret mass and the long gun barrel. Paints and tools are required separately.
Model tanks
Italeri Sd.Kfz. 171 Panther Ausf. A Model Kit
510025752€21.99
The Italeri Sd.Kfz. 171 Panther Ausf. A model kit brings one of the most recognized WWII tanks into a 1:56 scale format with a finished length of 12.1 cm. Its 40-part layout balances manageable construction with visible exterior definition, so the long 75 mm gun, sloped armor, side skirts, tracks, and road wheels come together in a compact armored vehicle build. Molded Zimmerit on the turret and hull gives the surface a textured character before paint is even applied, which helps washes and dry-brushed highlights settle into the pattern. The Panther Ausf. A design is rooted in the wartime vehicle powered by a 700 horsepower V-12 Mayback engine and shaped around inclined front armor, details that inform the model's distinctive silhouette. Decals for 2 versions allow different markings on the same base vehicle, adding variety to the finishing stage. Assembly is required, and the stated build time is 600 minutes. Paints are required separately. On a worktable, the kit supports a steady sequence of trimming, fitting, painting, and marking rather than a rushed session. Once completed, the 1:56 scale tank suits display alongside other military subjects, and it also sits naturally in small diorama scenes where the Panther's low profile and long barrel stand out clearly. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Sd.Kfz. 232 6 Rad Model Kit 1:72
510097032€18.99
The Italeri Sd.Kfz. 232 6 Rad model kit in 1:72 brings a distinctive heavy armored reconnaissance car to the workbench, combining the long 6-wheel chassis, armored turret and prominent radio antenna structure in a compact historical build. Its shape captures a vehicle developed for mobile scouting duties, where road movement and battlefield communication had to work together in one machine. The Sd.Kfz. 232 served with Wehrmacht units in the mid-1930s and was designed around reconnaissance and radio communication between units. That role gives this model a character that goes beyond armor alone, because the vehicle's identity is tied just as strongly to its communications equipment as to its turret armament. The large antenna frame is one of the defining visual elements of the type, making the silhouette immediately recognizable in a display lineup. In 1:72 scale, that combination of chassis length, turret placement and antenna geometry creates a build with clear period presence. Once assembled, the model suits display alongside other 1:72 military vehicles, diorama scenes or historically focused collections. The detailed kit format also makes it a strong choice for builders aged 14 years and up who enjoy military subjects with a clear technical role and a distinctive profile.
Model tanks
Italeri Sd.Kfz. 234/2 Puma 8-Rad Model Kit
510006572€35.99
The Italeri Sd.Kfz. 234/2 Puma 8-Rad model kit brings the angular lines and 8-wheel stance of this late-war armored car into 1:35 scale, turning a well-known reconnaissance vehicle into a focused build with strong display presence. The finished subject combines the sloped hull, turret-mounted 50 mm KwK 39 L/60 gun and multi-axle layout that defined the Puma on both Eastern and Western fronts. This detailed plastic kit is built as an assembly project and draws on the vehicle's distinctive engineering rather than a simplified outline. Independent suspension across the 8 wheels shaped the original machine's mobility, and that layout gives the replica its characteristic long, planted silhouette. The kit also includes a photo-etched fret for finer scale parts and 9 tyres to complete the running gear, including the spare. Marking and camouflage references cover 4 historical versions, with options shown in Dunkelgelb 1943, Schokobraun RAL 8017, Olivgrün 1943, Rust and, on one version, Schwarzgrau RAL 7021. Assembly time is around 600 minutes. On the workbench, the combination of structural assembly, finishing and decal placement creates a build with clear stages and visible progress. Once completed, the Puma suits shelf display, diorama settings or a line-up of 1:35 military vehicles, with the 8-rad chassis and long gun giving the model a strong profile from every angle.
Model tanks
Italeri Sd.Kfz.140 Flakpanzer 38 Gepard 1:35
510096461€36.99
The Italeri Sd.Kfz. 140 Flakpanzer 38 Gepard at 1:35 scale brings a compact World War II self-propelled anti-aircraft vehicle into a build centered on tracked detail, armor layout and a prominent 20 mm Flak 38 installation. The open fighting compartment and shielded rotating platform give the finished model a clear operational character, whether placed in a vehicle lineup or worked into a field scene. The subject is based on the Panzer 38 chassis, a layout known for combining a light tracked form with the structure needed for a gun-mounted conversion. Italeri presents that form as a detailed plastic kit with unassembled parts that highlight hull panels, running gear elements, armor sections and small exterior fittings during the build. The included decal sheet supports 4 versions, with crosses, tactical markings, numbers, weight stencils and service markings that add period-specific surface detail. Link and length tracks shape the lower section with a mix of longer runs and separate pieces, giving the track assembly a more defined look around the wheels and sprockets. Once painted and marked, the Gepard suits shelf display, diorama work and historically themed armor collections. The 14+ age marking fits a hobby build that rewards careful assembly, finishing and placement of the included markings across the vehicle's exterior surfaces. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Sd.Kfz.234/1 Model Kit 1:35 Scale
510006757€36.99
The Italeri Sd.Kfz.234/1 model kit captures a late-war German armored reconnaissance vehicle in 1:35 scale, combining a detailed build with the distinctive look of the open-topped turret and 20 mm KwK 30 cannon. The finished replica reflects the compact, purposeful layout of the Schwerer Panzerspahwagen Sd.Kfz. 234 series, a vehicle family shaped for mobility, protection and firepower. This plastic kit draws on the Sd.Kfz.234/1 variant, which often served as a command vehicle and also operated in forward reconnaissance missions. The 8-wheel armored car design is central to its character, giving the model a long, low profile that stands apart on a shelf or in a diorama. Rubber tyres add another layer of realism to the running gear, while the photo-etched fret brings finer definition to selected exterior details. Decals for 3 versions open up different finishing directions, so the same base build can be completed with different markings and visual identities. The historical vehicle reached 85 km/h on roads, a figure that underlines the fast reconnaissance role behind the design. During painting and finishing, the turret screens, antennas and exterior stowage details create plenty of visual contrast across the hull. The 14+ marking suits the focused handling that small-scale military subjects and fine parts demand. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Sd.Kfz.251/1 Ausf. C 1:72 Fast Assm. Kit
510107516€16.99
The Italeri Sd.Kfz.251/1 Ausf. C Fast Assm. Kit brings a classic half-track subject into a compact 1:72 scale format with 2 matching builds in one box. Each model uses 100% new moulds and a simplified 14-part layout, creating a clean starting point for builders who want defined vehicle shapes, tracked running gear and a shorter route into painting and markings. The Sd.Kfz.251/1 Ausf. C combines front wheels with rear tracks, a layout that gives this WWII carrier its distinctive silhouette and makes it stand out in military model collections. The decal sheet supports 3 versions, including alternative tactical markings and registration plates that change the finished look from one build to the next. The assembly sequence centres on the lower hull, track units, upper body shell and small exterior fittings, so the structure of the vehicle becomes clear as the parts come together. Assembly is required, with a stated build time of 600 minutes. Paints are required separately. On a wargame table, the 2-model format supports paired vehicle scenes, convoy layouts or opposing paint schemes within the same scale. In a display setting, the compact footprint of 1:72 scale makes the finished half-tracks easy to place alongside figures, terrain pieces and other military subjects from the same period.
Model tanks
Italeri Semovente M42 da 75/34 1:35 Model Kit
510006759€39.99
The Italeri Semovente M42 da 75/34 Upgrade captures a distinctive Italian self-propelled gun in 1:35 scale, combining the compact M42 hull with the longer 75/34 cannon for a build centered on late-war armored warfare detail. The casemate layout gives the vehicle its low, purposeful silhouette, making the finished model stand out in military collections and diorama scenes. This version grows out of the Semovente line developed on the 'M' series medium tank hull, a format created to support tank and infantry units with self-propelled artillery. In this M42-based configuration, the 75/34 cannon replaced the earlier 75 mm howitzer to answer a request for stronger offensive capability. The first units reached the Italian Army in spring 1943, placing the subject in a clearly defined wartime setting for markings, weathering and scene planning. After the September 1943 armistice, the same vehicle type also saw use with German anti-tank battalions, which adds another documented service context for historically grounded finishing. On the workbench, the 1:35 scale supports focused painting, surface treatment and display planning without demanding the footprint of a larger armored vehicle. Once completed, the Semovente M42 da 75/34 fits naturally into World War II vehicle lineups, defensive positions and convoy scenes where its low hull and fixed-gun arrangement can be shown to full effect.
Model tanks
Italeri Semovente M42 da 75/34 Model Kit 1:35
510006584€36.99
The Italeri Semovente M42 da 75/34 brings a late-war Italian self-propelled gun into 1:35 scale as a detailed assembly kit shaped around the low M42 hull and the longer 75/34 anti-tank cannon. The compact casemate silhouette, tracked chassis and period markings give the finished model a strong armored profile for the workbench and display shelf. The subject is rooted in the wartime development of the Regio Esercito, which moved from the earlier Semovente 75/18 toward a version with increased offensive capability. Italeri builds that history into the kit through several finishing references covering Italian and German-operated vehicles from 1943 and 1944. The supplied decal sheet carries crosses, tactical numbers, registration plates and unit markings, while the instruction material shows camouflage layouts with corresponding paint references. An alternative metal gun barrel is provided for the main armament, and the build also allows version-specific details such as open or closed configurations in selected sections. During assembly, the interior floor, hull sections, running gear, upper panels and exterior fittings come together in a sequence that suits careful painting and detailing. Once completed, the model fits naturally into WWII armor collections, dioramas or a dedicated display of Italian fighting vehicles. Assembly kit included. Paints, glue and tools are required separately.
Model tanks
Italeri Sherman M4A3E8 Fury Tank Kit 1:56
510025772€21.99
The Italeri Sherman M4A3E8 Fury brings the late-war Easy Eight variant into 1:56 scale with a build focused on the features that defined this version of the M4 Sherman. The assembly kit uses 79 parts to shape the medium tank silhouette, from the turret and upper hull to the track units and external stowage, creating a compact military model with a strong historical profile. Production of the M4A3E8 began at the end of 1944, and this version introduced technical changes that set it apart from earlier Sherman variants. The 76 mm M1 high velocity gun gave the tank a different combat role and a distinct visual balance, while the horizontal volute spring suspension changed the look of the running gear along the hull sides. Decals for 4 versions open several marking directions for the finished build, and 1 included figure adds another layer to display or scenario setup. Assembly is required, with a stated build time of 600 minutes. Paints are required separately. On a shelf, in a diorama, or alongside 1:56 tabletop forces, the finished Sherman M4A3E8 Fury carries the recognisable Easy Eight layout seen in the final stages of World War II and in the Korean War. The scale also suits wargaming collections where vehicle presence, historical identity and manageable footprint matter together. Warning! Not suitable for children under 14 years.
Model tools
Italeri Spare Blades Pointed 5-Pack for #50822
510050825€4.59
Italeri Spare Blades pointed 5 offers a focused refill set for precise model-building work, with 5 pointed replacement blades made for tool #50822. The fine point shape suits careful trimming, scoring and detail cutting where narrow access and a sharp tip matter during assembly and finishing. As an assembly kit, this set supports ongoing bench work by keeping matching replacement blades ready for the correct handle format. The 14 Years marking is stated for the set, and the data lists assembly required with an assembly time of 600 minutes. The compact refill format makes sense for repeated workshop use, especially when clean cuts on small parts, edges or thin material call for a fresh blade rather than continued use of a worn one. The pointed profile is the defining feature here, giving the cutting edge a shape suited to controlled, exact work rather than broad slicing. On the workbench, the blades fit naturally into model-kit routines such as separating parts, refining edges and making small corrective cuts during longer builds. Kept alongside handle #50822, the 5-blade set provides a ready stock of matching replacements for steady, detail-led hobby sessions.
Model tools
Italeri Spare Blades Pointed for 50815/50818
510050824€2.79
Italeri Spare Blades pointed for 50815/50818 adds a focused refill set to the Professional Tools range, with 5 classic fine point blades supplied for detailed model making tasks. The pointed profile suits careful trimming, scoring and close work where a narrow tip helps follow small edges, openings and shaped sections with more control than a broader blade form. The pack is listed as an assembly kit and is intended as a replacement blade set for Italeri tool numbers 50815 and 50818. That direct tool reference matters at the workbench, because the blade shape is matched to those handles rather than presented as a generic craft refill. With 5 blades in the set, a fresh edge is available when repeated cutting on sprues, sheet material or masking media starts to reduce precision. The fine point format also supports detail-oriented tasks that need a clear view of the cut line while working in tight spaces. A 600-minute assembly time is stated in the data, and assembly is required. Suitable from 14 years, this refill set fits naturally into model building sessions that move between part cleanup, careful shaping and exact finishing cuts on small components.
Model aircraft
Italeri Spitfire Mk.V/Mk.IX 1:72 RAF Model Kit
510001482€16.79
The Italeri Spitfire Mk.V/Mk.IX 1:72 RAF model kit captures one of the most recognised fighter aircraft in aviation history in a compact scale that suits careful building and display. Its subject is the Supermarine Spitfire, a single-engine low-wing monoplane that stood at the centre of Royal Air Force fighter operations and became a defining aircraft of British aeronautical engineering. This kit focuses on the Mk.V and Mk.IX versions, linking two key stages in the Spitfire's wartime development. The Mk.V entered production in 1941 and used a 1,440 hp Merlin engine, while the later Mk.IX grew from the need to answer continuing technical advances in aerial combat. The aircraft's effective offensive armament and refined aerodynamic layout helped secure its place in front-line service, and the type was flown by some of the best-known RAF aces. In 1:72 scale, those historical details translate into a build with a clear identity rather than a generic aircraft subject. On the bench or in a display cabinet, the finished Spitfire carries the slim fuselage, low wing and unmistakable fighter profile associated with RAF operations of the Second World War. Age 14+ marks the recommended age. Paints are required separately.
Model tools
Italeri Sprue Cutter for Plastic Hobby Tool
510050811€9.49
The Italeri Sprue Cutter for Plastic brings a focused cutting tool to model building, with angled jaws, blue coated handles and a compact format that sits neatly at the workbench while separating plastic parts from sprues. Its plier-style layout supports controlled hand movement when small components need to be released cleanly before the next assembly step. A spring between the handles helps the cutter reopen after each cut, which keeps the motion consistent during longer building sessions. The central metal pivot guides the jaws through repeated opening and closing, while the short cutter head helps reach tight connection points on crowded frames. This makes the tool useful when working around narrow gates, fine edges and closely spaced parts that need careful removal before trimming or fitting. Assembly is required, with a stated assembly time of 600 minutes. On the bench, the cutter fits naturally into the early stages of a scale model project, where parts are removed, grouped and prepared before sanding or joining. It also suits later detail work when a fresh section of the sprue still holds smaller pieces that need accurate separation for the next stage of the build.
Military aeroplane models
Italeri Stirling Mk. III Aircraft Kit 1:72
510001462€49.99
Italeri Stirling Mk. III brings the first four-engined British heavy bomber of the Second World War into a 1:72 aircraft kit with a broad wing planform, elevated cockpit section and the distinctive stance created by its large landing gear. The build focuses on the Mk. III version, the direct successor to the Mk. I, and reflects the aircraft's all-metal airframe and four-engine configuration in a format suited to detailed bench work. The Short Stirling entered Royal Air Force Bomber Command service from the end of 1940, reached operational status in January 1941 and flew its first mission in February 1941 against logistics targets in Rotterdam. This kit draws on that wartime bomber history while adding build depth through multiple finishing paths. The included photo-etched fret introduces finer detail than standard sprue parts alone, and the decal sheet covers 5 versions with serials, stencils, roundels and nose art. The Mk. III variant is noted for Bristol Hercules XVI engines and enhanced defensive armament, giving the subject a clear place within the Stirling development line. Across the workbench, the combination of light grey moulded parts, etched details and historically themed markings supports a focused aircraft project with plenty of finishing character. Assembly time is stated as 600 minutes. Paints are required separately.
Model tanks
Italeri Sturmgeschütz IV model kit 1:35 scale
510000223€30.99
The Italeri 1:35 GER. Sd.Kfz.167 Sturmgeschütz IV captures the compact, purposeful form of the late-war German assault gun in a format that rewards careful building and finishing. Based on the Panzer IV chassis, the original vehicle combined a low silhouette with a casemate-mounted Stuk40 75 mm L/48 gun, and that distinctive layout gives the completed model a strong presence in a shelf display or diorama scene. This assembly kit focuses on the details that shape the vehicle's character. Gluable rubber tracks support a realistic look around the suspension and lower hull, while the included figure adds life to the open hatch area. The new decals sheet expands the finishing options with markings for 4 versions, including tactical numbers, Balkenkreuz crosses and unit insignia that help differentiate the final appearance. The subject itself carries strong historical interest: the Sturmgeschütz IV entered service in the early months of 1944 and was used on the Eastern Front as well as in Normandy, where its low profile made concealment in hedgerow terrain especially effective. With a 600-minute assembly time and a recommended age of 14+, this 1:35 scale model suits focused bench sessions where construction, painting and marking come together step by step. The finished vehicle works equally well as a standalone military display or as the centrepiece of a World War II diorama with terrain, weathering and crew detail. Warning! Not suitable for children under 14 years.
Model aircraft
Italeri T-6G Texan Aircraft Model Kit 1:48
510092652€30.99
The Italeri T-6G Texan captures a landmark training aircraft in a 1:48 aircraft model kit that brings its low-wing silhouette and tandem cockpit into clear focus on the workbench. Based on the North American design introduced in the second half of the 1930s, this build centers on an aircraft that shaped pilot training across decades. The original T-6 used an all-metal structure and seated instructor and trainee in tandem, a layout chosen to mirror the handling environment of frontline aircraft more closely than basic trainers. Its Pratt & Whitney R-1340 radial engine delivered about 600 horsepower, giving the full-scale aircraft the performance needed for advanced instruction and transition work. That background gives the finished model a strong technical identity as well as historical depth. The T-6 remained in active use during the 1950s and 1960s, and more than 60 air forces operated the type across countries including the United States, Italy, France, the United Kingdom, Germany, Belgium, the Netherlands and Brazil. On a shelf, in a study, or alongside other aviation subjects, the T-6G Texan stands out through its training role and broad international service record. Age 14+ marks the recommended build age for this scale kit. Warning! Not suitable for children under 14 years.
Model tanks
Italeri T34/85 Zavod 112 1944 Model Kit
510006758€39.99
The Italeri T34/85 Zavod 112 1944 model kit brings one of the defining Soviet tanks of World War II into a 1:35 scale format that gives the hull, turret and running gear clear visual presence on the workbench and in a finished display. Based on the T-34/85 configuration, this version reflects the 1943 to 1944 development that paired a new turret with the long-barreled 85 mm gun. The real vehicle became known for two key engineering features: sloped frontal armor and wide tracks. In model form, those elements shape the tank's low, purposeful stance and the broad track run that made the original vehicle effective across mixed terrain. The Zavod 112 designation places the subject within a specific wartime production variant, adding historical focus for builders who enjoy factory-specific armored vehicles rather than a generic T-34. The 1944 marking further anchors the build in the later phase of the war, when the T-34/85 entered Soviet armored units to face German tanks such as the Tiger and Panther. On the bench, this kit suits careful painting, weathering and diorama planning around an Eastern Front setting. Once completed, the 1:35 scale tank works equally well as a standalone display piece or as part of a broader World War II armor lineup.
Military figures & accessories
Italeri Telegraph Poles Model Kit 1:35 Scale
510000404€9.49
Italeri Telegraph Poles brings 1:35 scale infrastructure into a diorama with the distinctive look of period line routes, turning open ground, roadside stretches and rail-adjacent scenes into settings with more structure and direction. The assembly kit focuses on telegraph pole forms with crossarms, insulators and overhead wire runs that read clearly in military, transport or rural layouts. Different pole configurations shown for the set support more than a single visual rhythm, so a scene can shift between simpler line posts and a larger multi-crossarm arrangement. That variation helps break up repeated spacing and gives longer scenic sections a more natural flow. The insulator groupings and side-mounted fittings add the small technical cues that make utility infrastructure look believable at model scale. With an assembly time of 600 minutes, the build centres on careful placement and alignment rather than quick decoration, which suits detailed groundwork and structured scenic planning. The included component is an assembly kit. Placed along a road, beside a track section or across a field edge, the finished poles help guide the eye through the layout and connect separate scenic zones. In a historical street scene or transport setting, overhead lines can define distance, mark routes and add height without crowding the ground-level composition. 14 Years+ is stated as the minimum age.
Model figures
Italeri Templar Knights 1:72 Medieval Model
510006125€11.99
Italeri Templar Knights - Medieval Era brings mounted medieval warfare into 1:72 scale with an assembly kit centered on the iconic Templar order. The set draws on the historical image of the knights in white robes marked with a red cross, creating a strong visual identity once the figures are built and finished. The subject focuses on heavy cavalry, a defining battlefield role of the Templars, and the parts layout shows horses, riders, shields, swords, lances and flag poles arranged on beige sprues. That combination gives the build a clear structure, with separate components coming together as mounted figures ready for formation scenes, dioramas or historical army displays. The 600-minute assembly time points to a substantial model making project rather than a quick snap build, leaving room for careful fitting, surface preparation and painting work across the full cavalry group. On the workbench, the 1:72 scale supports compact scenes with multiple mounted figures, while the medieval theme pairs naturally with castles, siege settings and wider historical collections. Once completed, the cavalry poses, heraldic crosses and horse movement create a scene that reads as a charging formation across open ground.
Model figures
Italeri Teutonic Knights 1:72 Cavalry Kit
510006019€10.99
Italeri Teutonic Knights XIIth-XIIIth cent. brings a medieval cavalry subject into 1:72 scale with 17 mounted figures shaped for a substantial historical formation. The set draws on the Teutonic Order, whose white surcoats marked with a black cross give the riders a clear period identity on the workbench and in a finished scene. The assembly kit uses separate rider and horse parts, allowing each mounted figure to come together through a detailed build process rather than as a single cast piece. Sprue-based components show multiple horse poses, including forward-moving and more animated stances, which helps vary the rhythm of a formation across a diorama base. Heraldic shield details and flowing horse coverings add further period character to the cavalry group. With an assembly time of 600 minutes, the set supports a longer project centered on preparation, fitting and finishing. Once completed, the figures suit battle recreations, display arrangements and wider medieval table scenes where a mounted order needs visual presence. The 1:72 scale also makes the set easy to combine with other historical scenery, fortifications or troop formations built around the same period. Recommended for ages 14 years and up.
Model figures
Italeri The Grays 1:72 Confederate Troops Kit
510006014€10.99
Italeri The Grays presents a 1:72 scale Confederate troop set built for historical scenes with strong visual variety. The box contains 50 figures and 1 rider, giving a broad base for arranging infantry lines, command positions, and cavalry presence across a Civil War layout. The subject draws on Confederate troops formed from 1861 onward, with a strong connection to Virginia volunteers rather than a fully standardised professional force. That background supports the set's varied uniform appearance, which helps a finished scene look more authentic when figures are painted and grouped in different roles. Rifles, kneeling poses, standing poses, advancing stances, and a flag-bearing figure create movement across the formation instead of a single repeated silhouette. The unassembled parts are moulded on sprues, allowing each figure to be prepared, painted, and placed with control over spacing and composition. With a stated assembly time of 600 minutes, this kit suits a longer bench project focused on painting, arrangement, and historical atmosphere. On a display base, in a battlefield diorama, or alongside other 1:72 military subjects, The Grays adds scale depth and a clear period character through its mix of infantry poses and mounted detail.
Model tanks
Italeri Tiger I Ausf. E/H1 Model Kit 1:35
510006767€34.99
The Italeri Tiger I Ausf. E/H1 model kit captures one of the Second World War's most recognised heavy tanks in 1:35 scale, turning a landmark armoured vehicle into a detailed build with a strong display presence. Based on the Panzerkampfwagen VI Ausf. Tiger I, the subject combines a broad hull, a prominent turret and the unmistakable profile of the long-barrelled 88 mm KwK 36 L/56. The original vehicle was developed to give Wehrmacht armoured divisions a more heavily armed and armoured tank alongside the Panzer III and Panzer IV medium tanks. That background gives the build clear historical context beyond the finished silhouette. The turret-mounted main gun sat behind a 120 mm gun mantlet, a defining feature of the Tiger I design and a key visual reference for this version. The type entered combat at the end of 1942 on the Eastern Front near Leningrad and also saw action in the Tunisian campaign in the early months of 1943, placing this model within two major theatres of the war. On the bench, the 1:35 scale supports a satisfying balance between manageable size and visible detail. Once assembled, the model suits shelf display, diorama settings or a military vehicle line-up that spans German armour of the period. Age 14 Years is stated for this kit. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Tiger I Ausf.E Model Set 1:56 Scale
510075002€24.99
The Italeri Tiger I Ausf.E Model Set 1:56 Scale brings one of the most recognized heavy tanks of World War II into a compact build format with a clear military profile. The Panzerkampfwagen VI Tiger I was developed as a heavily armored and heavily armed tank, and that identity shapes the finished model through its broad hull, turreted layout, and unmistakable gun silhouette. At the center of the design is the long-barreled 88 mm KwK 36 L/56 anti-tank gun, a defining feature of the original vehicle and a key visual anchor in the completed build. The source vehicle paired that armament with heavy armor, including 120 mm shielding for the turret gun area, which helps explain the Tiger I's imposing form and battlefield role. The Ausf.E designation gives the set a specific historical variant rather than a generic tank subject. With a 1:56 scale, the model balances manageable handling during assembly with enough presence for painted display. The age marking is 14 Years. This model set suits focused bench sessions, whether the aim is careful painting, adding weathering effects, or placing the finished tank into a World War II collection. On a shelf, desk, or diorama setting, the Tiger I Ausf.E stands out through its distinctive proportions and historically grounded armament layout. Warning! Not suitable for children under 14 years.
Model tanks
Italeri Tiger I Ausf.E mP. 1:35 Model Kit
510006507€39.99
The Italeri Tiger I Ausf.E mP. in 1:35 scale brings the mid production heavy tank into a focused model-building project with a finished length of 24.1 cm and a layout shaped by period-specific equipment. The assembly kit recreates a vehicle from the second half of 1943, combining the earlier hull basis with the newer turret design, increased protection, and an improved commander's cupola. This version is set up for a more detailed build through upgraded moulds, while parts for 2 variants allow different configuration choices during assembly. Some of the represented vehicles retained the Feifel dust filter system and smoke grenade launchers, and the kit also reflects the magnetic mine paste applied from August 1943 on German Army tanks. The included photo-etched fret adds sharper scale detail to selected components, and the link by link tracks create a more segmented, mechanical track run than a single-piece alternative. Decals for 4 versions extend the finishing options with different markings once painting is complete. The 600 minute assembly time gives the build room for careful work across the hull, turret, running gear, and exterior details. On a shelf, desk, or in a military model collection, the completed Tiger I stands out through its long gun barrel, interleaved road wheel layout, and mid production configuration. Figure not included.
Trailers & accessories
Italeri Timber Trailer model kit 1:24 scale
510003868€57.99
The Italeri Timber Trailer model kit brings a European log transport trailer into 1:24 scale with a 56 cm finished length and a long, purposeful silhouette. Its layout is based on a trailer designed for carrying logs and timber, with a front bulkhead, a long loading platform, and upright supports that frame the cargo area with the look of a working forestry hauler. The chassis uses a sturdy frame and a complex 3-axle shock absorber arrangement reinforced for heavy loads, giving the underbody the layered structure seen on full-size timber trailers. Extensible structures along the platform are designed to hold trunks of different sizes in place, which adds a clear functional logic to the finished build rather than a flat display shape. The kit includes 6 tyres, wire, decals, and rope, opening up detailed finishing options from wheel assembly to load securing and regional marking choices. Decal options include multiple European registration styles and GSODAM markings, which support different display interpretations within the same trailer design. On a shelf, in a truck diorama, or paired with a heavy tractor unit, the completed trailer creates a strong transport scene with clear forestry character. Model makers aged 14+ can approach the build as a longer project of about 600 minutes, with separate stages for frame construction, deck detailing, upright stake assembly, and final finishing.
Military aeroplane models
Italeri Tornado GR.1/IDS Gulf War Kit 1:48
510035107€39.49
Italeri Tornado GR.1/IDS Gulf War in 1:48 brings the shape of a multirole combat aircraft into a detailed plastic kit with a strong historical setting. The variable-sweep wing, twin-engine configuration and low-altitude strike role give this aircraft a distinctive silhouette on the workbench and in a finished display. The Tornado was developed jointly by British, German and Italian companies and served in several roles, including ground attack, electronic combat and reconnaissance, plus interceptor duties. Its main task remained low-altitude penetrating strike missions, supported by a broad offensive weapons load and 2 afterburning turbofans. In service, the aircraft could reach a maximum speed of Mach 2.2. This edition centres on the Gulf War period, when Italian Tornados IDS took part in the 1991 air campaign aimed at military targets and infrastructure. During assembly, the changing wing geometry, 2-seat cockpit layout and combat-aircraft proportions give the model a focused military aviation character. Once finished, the Gulf War markings and desert scheme suit shelf display alongside other modern aircraft subjects, while the 3-version decals sheet adds choice to the final finish. Warning! Not suitable for children under 14 years.
Military aeroplane models
Italeri Tornado GR.1/IDS Gulf War Model Kit
510002783€35.99
Italeri Tornado GR.1/IDS - Gulf War brings the shape of the multirole strike aircraft into 1:48 scale with a finished length of 38.1 cm and the unmistakable silhouette of its variable-sweep wing layout. The twin-engine configuration and low, purposeful stance give the completed model the presence associated with the Tornado's low-altitude mission profile. This assembly kit is based on the GR.1/IDS version used during the 1991 Gulf War, a period when the aircraft was deployed in aerial strike operations against military targets and infrastructure. The subject aircraft was developed through a joint British, German and Italian programme, which gives the model added historical depth beyond its combat setting. The airframe is known for carrying a broad offensive loadout, and the kit imagery shows external stores, pods and fuel tanks that suit a detailed finishing approach. The decal content extends the build with markings for 6 versions, allowing different operator and mission-specific looks across the same core airframe. A stated assembly time of 600 minutes places this release firmly in the hands-on model building category, where painting, decal placement and careful subassembly work shape the final result. On the bench, the 1:48 format offers enough size for cockpit detail, surface treatment and weathering effects, while the completed aircraft stands out in an aviation collection focused on modern military subjects. Paints are required separately.
Military aeroplane models
Italeri Tornado GR.4 Aircraft Model Kit 1:32
510002513€144.99
Italeri Tornado GR.4 is a detailed 1:32 aircraft model kit that brings the distinctive lines of the RAF strike aircraft into a large 52.1 cm format. The twin-engine jet is reproduced with variable-sweep wings, giving the finished build the characteristic stance of the full-size Tornado whether shown in a more compact swept configuration or with the wings extended. The subject represents the GR.4 standard, the upgraded version with revised avionics and mission capability. The kit is based on 100% new moulds and uses photo-etched parts for finer detail in key areas. An openable radome exposes the radar installation, while the removable RB.199 engine can be set on its dedicated support trolley for a maintenance-style display. Retracted or extended flaps and slats, plus movable ailerons, allow the airframe to be finished with a more tailored parked or service configuration. Rubber tyres and rubber covers for the wing entry points into the fuselage add material variation where the original aircraft shows flexible sealing surfaces and weighted undercarriage details. A super decals sheet supports 4 R.A.F. versions, including standard service schemes and special livery subjects, with markings for the airframe, cockpit instruments, pylons, tanks and selected stores. This gives the build several authentic finishing directions, from operational squadron aircraft to commemorative presentation schemes. The kit is designed for ages 14+ and requires assembly. Assembly time is 600 minutes.
Model car kit
Italeri Toyota Safari LandCruiser 1:24 Model Kit
510003681€35.99
The Italeri Toyota Safari LandCruiser 1:24 Model Kit brings one of the most recognisable off-road vehicle shapes into a detailed scale build. Its plastic construction focuses attention on the classic J-40 inspired form, with the upright body, restrained lines and utility-driven proportions that made this Land Cruiser generation stand out across decades of production. The Safari theme adds a tougher visual identity drawn from the more extreme equipment and trim associated with that version. Within the wider Toyota Land Cruiser history, the series began in the 1950s and developed through changing engines, design updates and technical solutions. This kit draws from the era of the J-40 family, a range produced from the 1960s to the 1980s and remembered for its understated appearance. In 1:24 scale, the model gives enough presence for the body shape and period character to read clearly once assembled, while still fitting comfortably into a collection of vehicle builds. The 14 years age marking places the focus on a more involved modelmaking session rather than quick play. On a worktable, the build offers a close look at the LandCruiser silhouette; once completed, the finished model suits shelf display alongside other classic 4x4 and automotive subjects.
Trailers & accessories
Italeri Truck Accessories II Model Kit 1:24
510000720€32.99
Italeri Truck Accessories II expands a 1:24 truck build with a broad mix of detail parts for European and US truck models. The assembly kit combines exterior trim, workshop equipment and figure elements, so a plain cab or trailer setup can be developed into a more individual display with transport, service or motorsport character. The parts layout shown in the kit covers chrome-finished components such as wheel rims, hub covers, mirrors, lamps, bars and exhaust pieces, alongside body panels, brackets and smaller fittings on additional sprues. A waterslide decal sheet adds number plates, hazard panels, fuel labels, road signs and sponsor-style graphics, giving the builder more than one visual direction for the finished model. The set also includes 3 figure types and accessory details such as coiled connection lines, a jack, a fire extinguisher and storage-style parts that help fill the space around the truck with workshop or roadside context. Assembly is required, with a stated assembly time of 600 minutes. On the bench, the kit supports careful painting, decal placement and part selection across cab roof, bumper, side and rear areas. In a finished 1:24 scene, the added details can frame a parked tractor unit, a service stop or a customised show truck with more visual depth than a standard build alone.
Trailers & accessories
Italeri Truck Accessory Set Model Kit 1:24
510103854€35.99
The Italeri 1:24 Truck Accessory Set brings extra character to a scale truck build with add-on parts and a broad decal selection shaped for custom road-haul styling. Chrome-look accessories, textured platform sections and exterior trim give the model more visual depth, while the 1:24 scale keeps the set aligned with matching truck projects on the workbench. Inside the assembly kit, injection-moulded components arrive on sprues and support a detailed build process that focuses on placement and finish rather than a single fixed look. The decal sheet carries logos, number graphics, country names, flags and flowing stripe graphics, opening up different cab themes and transport identities across one model. Visible markings include truck-related names and trim scripts such as Topline Classic and Globetrotter XL, alongside grille emblems and regional motifs that sharpen the final presentation. A curved hose element adds another workshop-style detail for equipment layouts and exterior fittings. Assembly time is stated as 600 minutes. Mounted on a truck tractor, the added steps, bars and plated sections change plain body areas into busier technical surfaces suited to display shelves, dioramas or long-term build projects. The set is marked 14 Years+ and suits model makers who want to refine a 1:24 truck with more trim, markings and scene-specific details.
Trailers & accessories
Italeri Truck Rubber Tyres 1:24 Assembly Kit
510003889€12.99
Italeri Truck Rubber Tyres 1:24 Assembly Kit brings scale truck builds a dedicated wheel upgrade with 8 rubber tyres designed for 1:24 modelling. The rubber material and visible tread pattern give finished trucks a more realistic road-going look, whether the set is used on a fresh assembly or to replace worn kit parts on an existing display model. Each tyre is shaped to suit truck subjects in 1:24 scale, helping wheel proportions stay consistent across multi-axle layouts and larger commercial vehicle builds. The set works well for workshop-style customising, restoration of older models, or adding more convincing surface detail to a cab and trailer combination. Because the tyres are supplied as an assembly kit, fitting and alignment become part of the modelling process rather than a simple drop-in swap. The stated assembly time is 600 minutes. Recommended from 14 years. On the bench, the 8-piece tyre set gives builders the freedom to refresh a complete truck wheel setup in one go. In a display cabinet or diorama scene, the rubber finish and tread definition help the completed model read more like a scaled vehicle and less like a simplified static build. Warning! Not suitable for children under 14 years.
Trailers & accessories
Italeri Truck Shop Accessories Model Kit 1:24
510000764€29.99
Italeri Truck Shop Accessories brings a broad detailing upgrade to 1:24 truck model kits with more than 40 separate accessories, chromed parts and a large decal sheet. Exhaust stacks with perforated shields, bars, lamps, trim pieces and workshop equipment give a standard truck build the look of a road-going custom rig with more visual depth on the cab, chassis and surrounding scene. The set is designed as an assembly kit and extends far beyond exterior trim alone. Bull bars, spoilers, name plates and additional head lights support custom front and roof layouts, while tools and workshop props add extra structure around a parked vehicle. Chromed sprues supply plated components for bright metallic contrast, and the decal sheet adds symbols and colour stripes that can be placed to echo contemporary truck graphics. Two figures are part of the set, helping a garage, truck stop or service-area scene feel inhabited rather than static. On the bench, the 1:24 scale keeps the accessories aligned with matching truck kits and makes placement across cab roofs, side areas and diorama spaces easier to judge. With an assembly time of 600 minutes and an age marking of 14 years and up, the set suits focused model sessions where custom details, scene props and finishing touches shape a more individual truck display.
Military aeroplane models
Italeri Tu-22M2 Backfire B Aircraft Kit 1:72
510001440€62.99
Italeri Tu-22M2 Backfire B brings a large Cold War bomber subject into 1:72 scale with the long fuselage, swept wings and twin-engine layout that define this aircraft. The detailed plastic kit is built as an assembly project and suits model builders aged 14 years and over who want a substantial aviation subject on the bench. The subject itself traces back to the Tupolev TU-22M family developed in the late 1960s and introduced with the Soviet Air Force during the 1970s. Its variable-geometry wing concept and Mach 1.9 capability give the finished model a strong technical identity beyond its silhouette alone. The kit also draws on original moulds from ESCI, linking this release to a well-known tooling heritage. New decals are included, and the super decals sheet allows 3 versions, opening different marking routes during the finishing stage. The instruction material also shows a Kh-22 missile and multiple paint and marking references for the aircraft views. Across a workbench or in a display cabinet, the completed bomber stands out through its broad wing planform, tall fin and long nose profile. Assembly is required and the stated assembly time is 600 minutes. Paints, cement and tools are required separately. Warning! Not suitable for children under 14 years.
Model tanks
Italeri U.S. Motorcycles WWII Model Kit 1:35
510000322€11.99
Italeri U.S. Motorcycles WWII is a 1:35 scale assembly kit built around 2 U.S. military motorcycles and 2 figures, bringing a compact World War II vehicle scene onto the workbench. The D-DAY SERIES - NORMANDY 1944/2014 theme gives the set a defined historical frame, while the finished motorcycle length of 6.4 cm keeps the models well suited to shelf display and diorama layouts. The source material in the kit points to wartime liaison, staff and military police use, so the motorcycles suit scenes based on traffic control, dispatch riding and troop movement support rather than only static parking poses. Technical reference printed with the kit names a 739 cc engine, 3 gears, 23 HP at 4800 R.P.M., a maximum speed of 120 km/h, a weight of 245 kg and an 11.4 liter tank capacity, adding period-specific background for builders who value real vehicle data alongside the build itself. Decal placement and marking alternatives support 2 finishing versions, and the figure set expands the scene with rider and standing crew poses. On the bench, the combination of motorcycles, figures and markings supports a focused military vignette with a small footprint. The 1:35 scale also fits naturally into broader WWII diorama settings, whether the scene calls for a roadside checkpoint, a field dispatch stop or a convoy control moment.
Military helicopters
Italeri UH-1D Slick 1:72 Helicopter Model Kit
510101247€15.99
Italeri UH-1D Slick is a 1:72 helicopter model kit that brings the unmistakable outline of this military utility aircraft into a 14 cm display format. The assembly kit captures the long fuselage, tail boom, skid undercarriage and 2-blade rotor arrangement that made the UH-1 family one of the best known rotorcraft in service, with markings and configuration paths linked to real military operators. The build uses version-based assembly choices rather than a single fixed finish. Interior steps show different cabin arrangements for U.S. Army and other versions, while side door assemblies can be fitted with alternative clear window parts and posed in different positions during construction. The finishing guide covers multiple schemes, including UH-1D U.S. Army Wasp Platoon, 116th Assault Helicopter Company, Vietnam '71, AB-205 Italian Army 5° Raggruppamento Rigel A.L.E., 1979, German Army Rescue Service, Bukeburg, 1992, Spanish Army BHELMA II, 1992, and German Army HFR 6 Special Colors, May 2004. Decal placement and paint references are matched to each version for accurate final detailing. With 600 minutes assembly time, the kit suits focused bench sessions centred on fitting, painting and marking work. Radio gear, a battery pack, a charger and paints are required separately only where the chosen hobby setup calls for them; the included content is the assembly kit itself. Once completed, the model gives a compact helicopter subject for display in a cabinet, on a shelf or alongside other 1:72 aircraft builds.
Military helicopters
Italeri UH-1D Slick Helicopter Model Kit 1:48
510000849€25.99
Italeri UH-1D "Slick" brings one of the most recognizable military helicopters into 1:48 scale as a detailed assembly kit with a finished model length of 27.0 cm. The Bell UH-1D Iroquois layout is defined by its long fuselage, skid landing gear and broad cabin section, giving the completed helicopter the unmistakable profile associated with transport, ambulance and utility missions. The build combines exterior structure and finishing detail in equal measure. Separate fuselage sections, roof parts, rotor components and side assemblies shape the airframe step by step, while clear window elements and door parts create a more layered cabin look than a single-piece shell. The decal sheet supports multiple service versions, including U.S. Army, German HEER and RAAF markings, with serials, warning labels and small maintenance stencils that sharpen the scale impression. Paint references with Federal Standard codes are provided for key areas such as olive drab, gunship gray, black, white, orange and insignia yellow. During assembly, the rotor mast, main blades, tail rotor, skids and exterior fittings gradually define the helicopter's working character, making the model engaging both as a build and as a finished display piece. Assembly time is about 600 minutes. Paints, cement and tools are required separately.
Military helicopters
Italeri UH-60A Black Hawk Night Raid Model Kit
510002706€28.99
The Italeri UH-60A Black Hawk Night Raid model kit brings a modern military helicopter into 1:48 scale with a finished length of 31.7 cm and a mission-focused silhouette shaped by the Black Hawk airframe. As an assembly kit, it centres the build on careful part preparation, alignment and finishing, with the Night Raid theme giving the completed helicopter a low-visibility operations look. The real UH-60A Black Hawk entered service in 1978 as the Army's front-line utility helicopter for air assault, air cavalry and aeromedical evacuation units, and that operational background gives the subject clear historical context on the bench. The aircraft is designed to carry 11 combat-loaded air assault troops and can move a 105 mm howitzer with 30 rounds of ammunition, underlining the transport role behind its compact, purposeful layout. Modified Black Hawks also operate as special operations platforms, which fits the Night Raid designation and the Afghanistan 2011 reference shown for this version. Decals for 2 versions support alternate finishing paths, while paints, cement and tools are required separately. On the workbench, the 600-minute assembly time allows a measured approach to cockpit, fuselage and rotor stages instead of rushing the fit. Once completed, the 1:48 format suits a display shelf, a modern aircraft lineup or a diorama scene built around night insertion and field operations.
Model figures
Italeri Union Artillery Model Kit 1:72 Scale
510006038€10.99
Italeri Union Artillery brings a Civil War battlefield scene into 1:72 scale with an assembly kit centered on Union artillery at Gettysburg. The set combines artillery crew, mounted troops, horses, a covered wagon and a cannon, creating a historical composition that carries the tension of a field position under pressure. The subject draws on the summer of 1863, when Union artillery helped contain the Confederate advance during the Battle of Gettysburg. In this kit, that context shapes the finished scene into more than a single gun emplacement, because the 3 riders, 10 figures, 8 horses, 1 covered wagon and cannon allow several positions and relationships within the same layout. Separate miniature parts support a staged arrangement of crew activity, transport movement and mounted presence. The 1:72 scale also fits naturally into historical dioramas and collections built around military miniatures from the same period. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a display case or as part of a wider battle layout, the completed scene can be arranged to emphasize the cannon crew, the wagon train or the mounted figures. That makes the set suited to builders who enjoy planning composition as much as assembling historical miniatures.
Military aeroplane models
Italeri US P-38J Lightning Model Kit 1:72
510001446€28.99
Italeri 1:72 US P-38J Lightning captures one of the most recognisable twin-boom fighters of WW2 in a detailed assembly kit with a finished model length of 16.0 cm. The central cockpit, twin-engine layout and long tail booms give the aircraft its unmistakable silhouette, making the build stand out in any 1:72 aviation line-up. The kit is designed for builders aged 14 years and over and uses a detailed plastic construction format suited to careful assembly and finishing. A super decals sheet covers 4 versions, including historically specific markings and nose art options that change the final character of the aircraft. The canopy can be built in an open or closed position, which adds a visible display choice around the cockpit area. Figure not included. Assembly time is stated as 600 minutes. On the bench, the P-38J offers a build centered on the aircraft's unusual structure, with the cockpit nacelle set between the two booms and the propeller-driven engine sections extending into the wing. Once completed, the model suits shelf display, diorama scenes, or a broader WW2 aircraft collection where variant markings and the distinctive outline of the Lightning can be shown clearly.
Military helicopters
Italeri V-22 Osprey Tilt Rotor Model Kit 1:48
510002622€39.99
The Italeri V-22 Osprey Tilt Rotor model kit in 1:48 scale brings one of modern military aviation's most distinctive aircraft into a build focused on shape, mechanism and surface detail. At about 289 mm in length, the finished replica gives the tiltrotor layout enough presence to show the long fuselage, wing-mounted nacelles and twin-rotor configuration clearly on the bench or in a display cabinet. The full-size V-22 Osprey combines helicopter-style take-off and landing with fixed-wing flight, and that unusual concept defines the character of this kit. Its large swing rotors and rotating engines are central to the aircraft's identity, making the transition between vertical lift and forward flight the key visual feature of the build. The unassembled format supports a step-by-step modelling process, with assembly required and a stated build time of 600 minutes. Decals for 1 version provide the finishing markings for the exterior and help complete the military look with crisp visual detail. During assembly, the aircraft's unusual proportions become part of the appeal, from the broad wing arrangement to the tall tail surfaces and nacelle placement. Once completed, the model suits display alongside other 1:48 aircraft or as a standalone centrepiece that highlights the Osprey's hybrid helicopter-aircraft design.
Model motorcycles
Italeri Vespa 125 Primavera Model Kit 1:9
510104633€49.99
The Italeri 1:9 Vespa 125 Primavera model kit brings one of the best-known scooter silhouettes into a large display scale, with a finished length of 200 mm that gives the body shape, front shield and running gear real visual presence on the shelf. As a detailed static model kit, it centres the build on the clean, practical lines that made the Vespa name so widely recognised. The subject is the Vespa 125 Primavera launched in 1968, a version known for updated engine performance and easy riding in the full-size scooter. That heritage shapes the replica through its balanced proportions, slim handlebar layout, stepped seat and enclosed body form. Italeri specifies upgraded parts for this release, adding further definition to the construction and finish. The assembly kit format leaves room for careful painting and detail work across the white body panels, black seat, silver-toned components and small markings visible on the scooter. With a stated assembly time of 600 minutes, the build suits modellers who enjoy a longer bench session with a classic road vehicle subject. Once completed, the model works equally well as a display piece beside other two-wheel replicas or as a focused standalone build centred on Italian scooter history. Paints and tools are required separately.
Model motorcycles
Italeri Vespa PX 125/150 1978 Model Kit 1:9
510104645€54.99
The Italeri Vespa PX 125/150 1978 model kit captures one of the most recognizable scooter shapes ever built in a large 1:9 scale. Its subject is the Vespa PX from Piaggio, a machine defined by a metal body, a clean step-through layout and the manual gear shift mounted on the handlebar, all of which give the finished replica a strong period identity. This kit draws on a scooter introduced in the late 1970s and closely tied to everyday urban riding. The full-size Vespa PX was created for city commuting and short leisure trips, and that practical role gives the model a grounded, authentic presence rather than a racing look. The 125/150 designation places the build within a well-known version of the PX line, while the 1978 specification anchors it to an early chapter of the series. With more than 3 million units produced across the PX family, the source vehicle holds a lasting place in scooter history. On a shelf, desk or in a collection of classic two-wheel subjects, the finished model stands out through its instantly familiar front profile and compact proportions. The 14 years marking suits the detailed nature of a scale build, whether the focus is on Italian vehicle history, scooter culture of the 1980s or a distinctive addition to a motorcycle model lineup. Warning! Not suitable for children under 14 years.
Military figures & accessories
Italeri Vietnam War Vietn. Army/Vietcong 1:72
510006079€10.99
Italeri Vietnam War - Vietn. Army/Vietcong is a 1:72 assembly kit built around the irregular and regular forces associated with the National Liberation Front during the Vietnam War. The unpainted figure parts arrive on sprues and form a compact miniature group for historically themed displays, battlefield layouts, and diorama scenes where pose, spacing, and period detail shape the final result. The subject draws on common iconography linked with Vietcong guerrillas and related Vietnamese Army forces. The source theme names Soviet-produced weapons such as the AK-47 Kalashnikov assault rifle and the semi-automatic SKS carbine, giving the finished figures a recognisable period profile once painted and arranged. Different body positions across the set help break up repetition in a scene, with standing, crouching, kneeling, advancing, and prone-style poses visible in the parts layout. At 1:72 scale, the figures work well alongside vehicles, terrain pieces, and other military miniatures built to the same proportion. A stated assembly time of 600 minutes points to a build that rewards careful clipping, cleanup, painting, and placement rather than a fast one-evening project. On a shelf, in a terrain vignette, or as part of a larger Tet Offensive era setup, the set gives military model builders a focused Vietnam War figure subject with room for detailed finishing. Recommended age: 14 Years.
Model trucks
Italeri Volvo FH Low Roof Truck Kit 1:24
510003967€74.99
The Italeri Volvo FH Low Roof kit in 1:24 brings the shape of a modern road tractor into a detailed scale build with the distinctive proportions of the Volvo FH III series. Its Low Roof cab format gives the truck a more compact profile than taller sleeper variants, while the aerodynamic design language keeps the finished model close to the look of the full-size commercial vehicle. This detailed kit centres on the tractor unit and draws on a truck series developed around efficiency, driver assistance, and transport flexibility. The cabin and chassis can both be customised in detail, which opens room for different finishing choices during assembly and painting. The Volvo FH III design is known for a modern front section, a strong grille layout, and a cab structure shaped for long-distance transport work. In scale form, those elements create a build with clear commercial character rather than a generic show truck. On the workbench, the 1:24 scale gives enough presence for painted details and careful finishing, and the completed truck stands out in a collection of transport and industrial vehicle models. Recommended from 14 years, this kit suits focused building sessions and display alongside other modern truck subjects. Warning! Not suitable for children under 14 years.
Model trucks
Italeri Volvo FH16 GLOBETROTTER XL Truck Kit
510003821€57.99
The Italeri Volvo FH16 GLOBETROTTER XL brings a modern heavy truck into 1:24 scale with a finished length of about 244 mm and a build that centres on the distinctive proportions of the FH16 cab and tractor chassis. As an assembly kit, it turns the full-size truck's long-haul character into a hands-on model project, with the GLOBETROTTER visor, Volvo grille treatment and tall cab profile shaping the finished look. The build develops through separate chassis, suspension and engine-area sections before moving into the cab and exterior fittings. Instruction imagery shows frame rails, axle assemblies, shock absorber parts, radiator and fan components, side tanks, box units and pipework that build up the underframe in layers. The cab section adds mirrors, roof trim, side panels, rear fairings and a catwalk platform behind the cab, giving the tractor unit the technical detail expected from a road-going flagship truck. Decal placement supports 2 decoration routes, including the Flower Connection graphics and an alternative striped version, with markings for the visor, grille, side panels and mudflaps. With a stated assembly time of 600 minutes, the kit suits a build spread across several sessions, from careful sprue work to painting and decal application. On a shelf, desk or model display, the 244 mm truck format gives the finished FH16 enough size to show off the cab lines, chassis detail and livery work from multiple angles.
Model trucks
Italeri Volvo FH16 Medium Roof Truck Kit 1:24
510003970€74.99
The Italeri Volvo FH16 Medium Roof brings the look of Volvo's modern long-haul tractor unit into a 1:24 scale truck kit with a strong road-going presence. The cab profile, front fascia and streamlined body lines reflect the aerodynamic design language associated with the FH series, giving the finished build a clear commercial vehicle character on the shelf. The full-size Volvo FH is described as a lightweight and practical tractor configuration developed for transport flexibility, and that identity carries into this scale subject through its focused tractor-unit format. The FH750 reference in the source material points to the range's high-output flagship with a 16.1-liter engine, a detail that adds context to the model's real-world inspiration. The medium roof layout shapes the truck's silhouette, while the modern exterior form emphasizes the current generation styling used for long-distance haulage. With 14 Years+ marking in the data, the kit suits builders looking for a detailed truck subject rather than a simplified toy. On a worktable, the 1:24 scale format gives space for a measured, detail-led build and a finished result with strong display impact. Once completed, the Volvo FH16 Medium Roof fits naturally into a commercial vehicle collection, a transport diorama or a line-up of modern European truck models.
Model trucks
Italeri Volvo FH16 Viking model kit 1:24
510003931€71.99
The Italeri 1:24 VOLVO FH16 "Viking" model kit brings a modern heavy truck subject into a detailed scale build with a finished length of 25.0 cm. Its show-truck styling, Viking-themed livery and road-haul proportions give the completed cab a strong presence whether placed in a workshop display, on a shelf or alongside other 1:24 transport models. The full-size Volvo FH16 behind this kit belongs to the heavy truck segment and is based on the FH Series introduced in 2001. Italeri shapes that subject into a build centered on the tractor unit, with molded cab parts, separate detail components and a finish that can be developed through painting and decal work. The super decals sheet covers exterior graphics as well as dashboard details, so the interior and bodywork can be carried through in a consistent style. Additional chromed parts extend the custom look into selected trim areas, while the new tyres and chromed wheel rims reinforce the visual weight of the finished truck. This assembly kit suits builders who like transport subjects with a strong graphic identity rather than a plain fleet finish. The roughly 600-minute build time leaves room for careful painting, decal placement and final detailing, making the VOLVO FH16 "Viking" a focused project for ages 14+ and a striking addition to a truck model collection. Warning! Not suitable for children under 14 years.
Model trucks
Italeri Volvo FH4 Globetrotter 1:24 Model Kit
510003942€78.99
The Italeri 1:24 Volvo FH4 Globetrotter /Medium Roof model kit brings the bold lines of Volvo's long-haul tractor unit into a detailed scale build with a finished length of 24.6 cm. The Globetrotter cab shape, show truck styling and Medium Roof profile give the completed truck a strong visual stance, especially with the KING-themed graphics and 750 markings carried across the cab and visor. This assembly kit uses upgraded moulds and new parts, supported by a new photo-etched fret for finer detail in selected areas. The super decals sheet goes beyond basic markings, adding branded graphics, dashboard details, registration plates, country identifiers and trim elements that help the build feel complete from exterior panels to cab details. Additional chromed decals and chromed adhesive introduce extra contrast against the painted surfaces, while the color instruction sheet supports the finishing stage with a clear paint reference. The Globetrotter cab is based on the full-size truck layout designed for overnight use, and that long-distance character comes through in the tall cab structure and transport-focused proportions of the model. On the bench, the kit suits builders who enjoy careful painting, decal placement and trim work as much as core assembly. Once completed, the 1:24 scale and 24.6 cm length give the truck enough presence for shelf display, where the grille, visor graphics and cab side artwork remain easy to read at a glance.
Model tanks
Italeri VTLM Lince model kit 1:35 scale
510006766€46.99
Italeri VTLM Lince is a detailed 1:35 model kit based on the LMV Lince light multirole tactical vehicle developed by Iveco Defence Vehicles in the early 2000s. The scale gives the vehicle a compact display footprint while preserving the angular bodywork, armored layout, and purposeful stance that define this modern military design. The full-size LMV Lince was created for troop transport and advanced reconnaissance across varied terrain and operational conditions, and that background gives the build a clear technical identity. One of its defining features is the armored crew compartment designed as an independent capsule separate from the chassis. On the real vehicle, this layout was developed to improve protection in the event of explosions beneath the hull, and on the model it adds a distinctive structural concept that sets the VTLM Lince apart from more conventional utility vehicles. The subject also carries strong service history, with deployments in Afghanistan, Iraq, Lebanon, and the Balkans. On the workbench, the VTLM Lince offers a focused military modeling project with a contemporary vehicle subject rather than a classic tank or truck. Once assembled, the 1:35 scale makes it easy to integrate into modern diorama settings, display shelves, or lineups of current tactical vehicles. 14 years and up Warning! Not suitable for children under 14 years.
Model car kit
Italeri VW Golf GTI Rabbit Model Kit 1:24
510003622€37.99
The Italeri 1:24 VW Golf GTI Rabbit brings one of the defining compact performance cars of the 1970s into a detailed scale build. Its 3-door hatchback form, round headlights, black grille with GTI badging and widened wheel arches give the finished model the unmistakable look of the first Golf GTI as it appeared in its early production years. This assembly kit draws on the original Volkswagen Golf launched in 1974, a car known for its water-cooled front engine, front-wheel-drive layout and clean, functional body design. The GTI version arrived at the Frankfurt Motor Show in 1975 with a 110 HP 1,600 cc engine, and that identity shapes the character of this model. The 1:24 scale gives enough presence for exterior details to stand out while still fitting neatly into a display cabinet or on a desk. Assembly is required, and the stated build time is 600 minutes. On the workbench, the project suits careful painting, trim work and final finishing, with the classic red body, dark bumper treatment and silver wheel look creating a strong period-correct result. Once completed, the model sits comfortably in a collection of historic road cars, European hatchbacks or iconic GTI subjects. Paints and tools are required separately.
Model car kit
Italeri VW Golf Mk.I Polizei Model Kit 1:24
510003666€36.99
The Italeri VW Golf Mk.I Polizei brings a familiar street scene from 1970s and early 1980s Germany into 1:24 scale, turning the first-generation Golf into a focused build with recognisable police markings and compact hatchback proportions. As a detailed plastic kit, it centres the making process as much as the finished replica, with the Berlin Police Department 1978 version providing the visual reference for the completed car. The build uses an unpainted body shell with moulded panel lines, separate trim and lighting parts, interior components and 4 rubber tyres. The decal sheet adds dashboard instruments, Volkswagen and GOLF D badges, police emblems, side markings and license plates, so the model gains both cabin detail and exterior identity during the final stages. Assembly instructions show cut, drill and placement steps, including specific fitting points for body parts and trim. Assembly is required and the stated assembly time is 600 minutes. Paints are required separately. On the bench, the sequence moves through chassis and body preparation, then into glazing, mirrors, wipers, bumpers and roof details before the livery completes the car's period look. Once finished, the model suits shelf display, diorama scenes or a collection focused on classic European vehicles and service cars from the late 20th century.
Model tanks
Italeri VW Typ 82 Kübelwagen Model Kit 1:35
510000312€12.99
The Italeri 1:35 VW Typ 82 Kübelwagen brings a compact World War II military vehicle into a scale model format with a finished length of 10.6 cm. Its small footprint suits display in a cabinet, on a desk, or as part of a larger historical layout, while the open utility-car design gives the build a recognisable silhouette with clear body lines and period character. The kit is supplied as an assembly kit and is recommended for ages 14 years and up. A stated assembly time of 600 minutes points to a build that rewards steady, detailed work across the vehicle and the 2 included figures. The scale of 1:35 places the Kübelwagen in a format widely used for military modelling, making it easy to stage with terrain elements and scene accessories from the same scale. The subject draws on the vehicle's wartime use across demanding terrain, a background that gives the finished model a strong historical identity. On the workbench, the combination of vehicle, figures, and markings supports a complete scene rather than a standalone build. The decal sheet for 1 version helps define the final look, whether the model is placed in a desert setting, a field command scene, or a transport display focused on military vehicles of the period.
Military figures & accessories
Italeri Walls and Ruins II Diorama Kit 1:72
510006090€9.49
Italeri Walls and Ruins II is a 1:72 assembly kit built around ruined architectural scenery for World War II dioramas. Broken walls, a large arch, smaller fragments and sandbag positions create the look of a shelled urban setting, giving military scenes a clear sense of place instead of leaving figures and vehicles on an empty base. The gray molded parts arrive on sprues and show engraved stone blocks, exposed brick, cracked plaster, wood details and rubble textures. One section carries an arched door, another a window opening, and the varied wall heights help shape sightlines, cover and depth across a compact display. Because the scenery is assembled from separate components, the layout can be planned around narrow streets, defensive corners or partially collapsed structures. The stated assembly time is 600 minutes, which suits a more involved build with painting and weathering stages. Placed beside 1:72 soldiers, artillery or vehicles, the ruin sections frame convoy routes, barricaded approaches and damaged strongpoints with a more convincing backdrop. The set also works as a focused terrain build on its own, where brick edges, masonry surfaces and sandbag details reward careful finishing and turn a plain base into a wartime street scene.
Military figures & accessories
Italeri Walls and Ruins Model Kit 1:72 Scale
510006087€9.49
Italeri Walls and Ruins brings damaged architecture into a 1:72 model scene with ruined wall sections, rubble details and accessory parts that shape a convincing World War II setting. The assembly kit uses polystyrene components with moulded masonry surfaces, broken edges and openings that give the finished structure a worn, battle-marked look. Large wall pieces, lower broken panels and separate debris sections allow different layouts across a base, so the same set can frame a street corner, a shattered defensive line or the remains of a larger building. Sandbag elements introduce another layer of scene building, adding cover positions and visual contrast beside the stonework. Exposed brick textures and damaged contours create depth that stands out once painted and weathered. The 1:72 scale fits naturally with military miniatures, vehicles and historical displays built to the same proportion. On the workbench, the 600-minute assembly time supports a slower build with room for test fitting, painting stages and final placement of rubble and barricade details. In a finished diorama, the ruined sections can anchor a battlefield vignette, surround an armoured vehicle, or define the backdrop for infantry figures in a compact World War II display.
Military helicopters
Italeri Wessex UH.5 Helicopter Model Kit 1:48
510002720€48.99
The Italeri Wessex UH.5 brings a distinctive British transport helicopter to 1:48 scale, built around the high-set cockpit line that made the Westland design instantly recognizable. This detailed plastic kit focuses on the UH.5 version used in the Falklands period, a variant developed for tactical transport duties involving artillery, ammunition and missile systems. New moulds support crisp exterior definition, while the included photo-etched fret adds finer metal detail where thinner parts matter visually. The decal sheet covers 4 versions, including Royal Navy and Royal Air Force rescue and service markings shown in the kit material, so the finished helicopter can be taken in different historical directions. A side sliding window may be positioned open or closed, adding another display choice to the cabin area. Assembly time is stated as 600 minutes. The subject suits builders who enjoy military rotorcraft with strong service history and visible mission character. On the bench, the combination of plastic parts, metal details and multi-version markings supports a focused finishing process; on display, the Wessex UH.5 stands out through its broad fuselage, tall cockpit stance and operational military presence. Paints are required separately.
Model tanks
Italeri Willys Jeep MB 80th Anniversary 1:24
510003635€37.99
Italeri presents the 1:24 Willys Jeep MB "80th Anniversary" as a detailed plastic kit built around one of the most recognizable light utility vehicles of the Second World War. The model combines the compact proportions of the original Willys Jeep MB with an open body, folded windshield, canvas top, rear spare wheel and side-mounted equipment, creating a display piece with strong period character. The 1:24 scale gives the build enough room for visible chassis, interior and exterior detail, while the commemorative 1941-2021 edition framing ties the subject to 80 years of Jeep history. A decal sheet for 6 versions expands the finishing options with different markings and service identities, including U.S. Army and U.S. Navy Seabees subjects shown in the reference material. The kit also uses rubber tyres, with 5 tyres included to complete the wheel set and spare. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the combination of body panels, interior fittings, exterior tools and marking choices supports a focused, step-by-step build with plenty of visual change as the jeep takes shape. Once painted and decaled, the finished Willys Jeep MB sits naturally in a military vehicle collection, on a diorama base, or alongside other 1:24 scale subjects with its compact wartime silhouette and distinctive utility details.
Model motorcycles
Italeri WLA 750 Military Motorcycle Kit 1:9
510007401€51.99
Italeri WLA 750 US Military Motorcycles brings a late 1930s service machine into 1:9 scale with the long, lean proportions and utility equipment that define this historic motorcycle. At 27.7 cm in length, the finished model has the presence to show its tall windscreen, spoked wheels, rear luggage layout and military field character in a clear, display-ready format. The build centers on a detailed plastic kit with dedicated assemblies for the fork, frame, engine, body panels and accessories. Instruction stages shown in the kit material cover wheel construction, hose routing, headlamp assembly and side equipment placement, giving the model a layered mechanical look rather than a simplified silhouette. The decal sheet adds tank stars, technical markings, registration numbers, unit codes and a speedometer face, so smaller surfaces carry the same period detail as the larger body sections. The subject itself reflects the WLA 750 used for surveillance and courier duties, a role that suits the fitted luggage, utility boxes and road-going layout. This model suits builders who enjoy historical vehicles with visible structure and equipment detail. Once assembled and finished, the WLA 750 works equally well as a centerpiece in a military collection or as a standalone motorcycle display with strong WWII-era styling. Paints and cement are required separately.
Military figures & accessories
Italeri WWII Accessories and Bunkers Model Kit
510006070€22.99
Italeri WWII Accessories and Bunkers is a 1:72 model kit built around a fortified World War II bunker scene with terrain and defensive details. The finished layout brings together a bunker structure, a shaped ground base and a spread of scenic parts that give military displays a clear historical setting rather than a bare stand-alone structure. The kit uses unassembled moulded parts and a vacuum base measuring 262 x 156 mm to form the scene. Curved wall sections, textured terrain elements and smaller structural pieces shape the bunker itself, while separate scenic details build out the position around it. Sandbags, barrels, crates, barricade-style frames and anti-tank obstacles add layers that suit diorama composition, static military displays and other 1:72 layouts. The bunker design shown in the assembled scene features a grass-covered roof, firing slits and an entrance opening, giving the fortification a recognisable defensive profile. With a stated assembly time of 600 minutes, the build suits model makers who enjoy arranging scenery as well as structure. The completed scene works as a focal point in a WWII display, as a terrain feature alongside other 1:72 military subjects, or as a compact standalone diorama with battlefield character.
Military figures & accessories
Italeri WWII German Motorcycles Model Kit 1:72
510106121€10.99
Italeri WWII German Motorcycles brings a compact World War II vehicle group into 1:72 scale, combining 4 motorcycles, 2 sidecars, and 16 figures in one polystyrene assembly kit. The mix of riders, seated crew, and standing poses gives the scene an immediate sense of movement, whether the layout suggests reconnaissance, escort duty, or a halt in the field. The set is built around small-format detail, with motorcycle parts molded on sprues and figure poses that extend beyond simple repetition. Seated positions work with the vehicles, while standing figures add observation and command moments that change how a display reads from one angle to another. The sidecar combination broadens the visual rhythm of the group and helps break up a straight vehicle lineup. Because the kit is supplied unassembled, painting and finishing can be matched to a chosen theatre, terrain base, or unit style. The stated assembly time of 600 minutes also makes this a longer-form bench project rather than a quick snap build. On a shelf, in a display case, or as part of a larger battlefield layout, the 1:72 proportion keeps the set easy to combine with other military miniatures and scenery. The result can range from a small standalone vignette to a wider convoy or desert patrol scene with clear historical character.
Military figures & accessories
Italeri WWII U.S. Infantry Winter Uniform 1:72
510006133€12.49
Italeri WWII U.S. Infantry Winter Uniform brings a winter combat scene into 1:72 scale with 48 figures designed for historical layouts, dioramas and tabletop formations. The set focuses on WWII U.S. infantry in cold-weather clothing, making it a strong match for snowy forest settings, defensive lines and advancing battlefield arrangements. The assembly kit arrives on sprues and is intended for builders aged 14 years and up. Different combat stances create variety across a finished scene, with figures shown aiming, moving forward, kneeling and taking lower positions that break up repeated silhouettes. Winter coats, helmets and camouflage garments shape the period look and help the group read clearly as a cold-weather unit once painted. The 600-minute assembly time points to a more involved project with room for careful preparation, finishing and placement across a base or gaming table. Used as a compact squad or spread across a wider layout, the 48-figure count gives flexibility when building patrol scenes, forest advances or defensive moments in snow-covered terrain. The set also works as a figure source for combining with vehicles, structures or landscape elements from the same historical period, allowing a more complete World War II display.
Military aeroplane models
Italeri XB-70 Valkyrie Aircraft Model Kit 1:72
510001282€52.99
The Italeri XB-70 Valkyrie in 1:72 scale turns one of the most striking aircraft of the Cold War into a large-format assembly kit with a finished length of 79 cm. The long pointed nose, slim fuselage, canard surfaces and broad wing layout give the model a dramatic runway profile that stands out during the build and on display. This assembly kit focuses on the shape and presence of the original prototype rather than a simplified quick-build approach. The subject traces back to the B-70 program launched in December 1957, when North American Aviation won the competition for a strategic bomber concept designed to combine heavy load capability with speeds beyond the B-58. The real XB-70 prototypes first flew in September 1964 and demonstrated speeds exceeding Mach 3, giving the finished model a strong link to a specific chapter of aerospace development. A decal sheet for 1 version supports the final finish, while the 1:72 scale gives enough surface area for panel lines, markings and the aircraft's unusual proportions to read clearly. The 600-minute assembly time suits a build paced across several sessions, from airframe preparation through painting and decal application. Assembly is required. Paints are required separately. On a shelf, desk or hobby display, the 79 cm airframe creates a clear focal point and brings the experimental character of the XB-70 Valkyrie into view from nose to tail.
Model trucks
Iveco HI-WY E5 Abarth 1:24 truck model kit
510003934€69.99
Iveco HI-WY E5 Abarth brings the look of the Abarth Racing Team support truck into a 1:24 scale model kit with a finished length of 25.4 cm. The static vehicle format puts the focus on the cab shape, the bold road-going tractor layout and the striking red, white and black livery that gives this heavy truck its show-truck character. The subject is based on the Iveco Stralis Hi-Way evolution, a heavy-duty truck line known for its redesigned cab and updated technical package. On the finished model, that translates into a modern front section, a tall roofline and broad side surfaces that give the decals room to define the Abarth identity. The kit uses a detailed assembly format in scale plastic construction and is intended for builders aged 14 years and up. A 600 minute assembly time supports a slower, more deliberate approach to painting and finishing. The supplied decoration options allow 2 visual versions, adding choice to the final presentation without changing the core vehicle form. On a shelf, in a display case or alongside other 1:24 commercial vehicles, the model stands out through its motorsport-inspired graphics and chrome-style wheel finish. Builders can concentrate on paintwork, trim contrast and decal alignment to bring out the character of this dedicated Iveco support truck.
Model trucks
Iveco S-Way Abarth Show Truck Model Kit 1:24
510003976€72.99
The Iveco S-Way Abarth Show Truck model kit captures a current long-distance transport icon in 1:24 scale, pairing the latest Iveco cab design with a celebratory Abarth livery that sharpens every aerodynamic line. Based on the vehicle generation introduced from 2019 as the successor to the Iveco Stralis, the subject brings a distinctly modern road presence to the workbench and the display shelf. The full-size Iveco S-Way was developed for efficiency in long-haul transport, and that focus shows in the cab's streamlined form, broad front treatment and clean side surfaces. In this scale format, those shapes create a truck build with strong visual structure and a clear contemporary identity. The Abarth graphics add a motorsport-linked layer to the exterior, turning a commercial vehicle into a show-truck themed replica with a more striking finish. The real vehicle is also known for advanced driver assistance, digitalisation and connectivity, which place the subject firmly in the newest generation of European truck design. On a shelf, in a collection cabinet or as part of a modern transport display, the Iveco S-Way Abarth Show Truck brings together current commercial vehicle styling and a special celebratory look. The 14 years and up marking fits the detailed model-kit format and the focused build character of a 1:24 truck subject. Warning! Not suitable for children under 14 years.
Model trucks
IVECO Turbostar 190.48 Special Model Kit
510003926€59.99
The Italeri 1:24 IVECO Turbostar 190.48 Special captures a landmark European road tractor in a format built for detailed scale modelling. This assembly kit centres on the famous 190.48 version, a truck known for its 480 HP engine and its strong presence in long-distance freight service, with the high-roof cab and bold Special graphics giving the finished model a distinctive 1980s road-haul look. The subject matter adds real character to the build. The Turbostar line held a major place in the European truck market, and this version reflects the two-axle road tractor layout that became a familiar sight on major transport routes. The kit is presented in 1:24 scale and draws on the full-size vehicle's combination of performance and compact overall dimensions. Decal artwork expands the finish with multiple stripe layouts, IVECO logos, dashboard details, speed markings, country ovals and licence plate graphics, allowing the cab exterior and interior to carry more period detail. During assembly, the chassis and running gear create a mechanical centrepiece, while the cab shape, mirrors, grille and lighting details build the truck's recognisable front end. The 600-minute assembly time suits a bench session spread across several stages, from preparing the main structure to applying the final markings. Recommended age: 14 years and up.
Diecast model kits
iXO Peugeot 205 GTI 1:8 Collectible Model
520010122€1,049.99
The iXO Peugeot 205 GTI in 1:8 scale brings the compact hot hatch shape into a large-format collectible model with a white body, black trim and the signature red GTI accent stripe. Opening side doors, a raised hood and a lifted rear hatch turn the finished replica into a display piece that shows more than the outer silhouette. The bodywork reflects the classic 3-door layout with silver alloy-style wheels, yellow fog lights, black side mirrors, tinted windows and a roof antenna. Peugeot badging, 205 GTI plates, 1.9 and GTI side markings, and the rear window rally text add model-specific identity drawn from the full-size car. Inside, the front seat folds forward to open access to the rear area, while the open hood view exposes engine components and mechanical detailing. The stated build consists of 720 parts, and the assembly time is given as 2100 minutes. On a shelf, desk or in a collector cabinet, the large 1:8 format makes the proportions, trim lines and opening sections easy to appreciate from every angle. During assembly and after completion, the model offers a focused look at the design details that made the Peugeot 205 GTI such a recognizable performance hatchback. Warning! Not suitable for children under 14 years.
Diecast model kits
iXO Peugeot 205 GTI 1:8 Model Car Red
520010121€1,049.99
The iXO Premium Collectables Peugeot 205 GTI in 1:8 scale brings the classic hot hatch shape into a large-format model car with striking red bodywork and finely reproduced GTI details. Opening side doors, a lift-up hood and a raised rear hatch create clear views into the cabin, engine compartment and cargo area, turning the finished build into a display piece with depth from every angle. Across the body, black side moldings, black bumper trim, wheel arch extensions, silver multi-hole wheels and the rear spoiler recreate the compact, performance-focused character of the original car. Front-end details such as the Peugeot lion emblem, rectangular headlights, amber corner indicators and yellow fog lights sharpen the period-correct look, while the rear view adds taillights, exhaust, rear wiper and hatch struts. Inside, the model shows seat shapes, headrests, door trim lines, the rear parcel shelf and dashboard elements that remain visible when the openings are raised. With 720 parts and a stated assembly time of 2100 minutes, this model kit suits a measured, detail-led build process as much as the finished presentation. On a shelf, desk or in a collector display, the opened panels invite a closer look at the 205 GTI layout, while the closed body highlights the crisp 3-door hatchback silhouette and classic 1.9 GTI identity. Warning! Not suitable for children under 14 years.
Diecast model kits
iXO Porsche 911 RS 2.7 Model Car 1:8
520010115€1,049.99
The iXO Premium Collectables Porsche 911 RS 2.7 in 1:8 scale brings the shape of a classic sports coupe into a large-format model car with a vivid yellow and black finish. Opening doors, a front hood and a rear engine lid turn the replica into more than a static shelf piece, revealing the cabin, front compartment and rear section in a way that makes the car's layout easy to explore. The body carries hallmark 911 details such as round headlights, silver window trim, black bumper accents and Carrera graphics along the side. At the rear, the spoiler, grille area and visible 2.7 marking reinforce the character of this specific version, while the rear view adds PORSCHE lettering and period tail light detailing. Beneath the car, molded chassis structure, axle detail, suspension elements and exhaust parts extend the realism to the underside. The 713-part construction supports finer shaping across the body, interior and mechanical areas, and the stated assembly time of 2100 minutes reflects a substantial build. Placed on a desk, in a display cabinet or alongside other scale vehicles, the 1:8 format gives the model strong visual presence from every angle. Open panels create different display setups, whether the focus is the side profile, the cabin view or the rear section with the lid raised. Warning! Not suitable for children under 14 years.
Diecast model kits
iXO Premium Collectables Alpine A110 Rally 1:8
520010111€1,049.99
iXO Premium Collectables brings the Alpine A110 Rally into a large 1:8 scale format that puts the classic Monte-Carlo competition shape, metallic blue bodywork and race number 22 at the centre of the build. The finished car carries the visual signature of a historic rally coupe, with period markings and competition details that give the silhouette a strong motorsport presence on display. This model kit is made up of 615 parts and is stated with an assembly time of 2100 minutes, giving the build room to focus on the car's distinctive exterior and rally-specific equipment. The body is paired with silver wheels, treaded rally tyres, front auxiliary lamps and rear mud flaps, while the glazing leaves the interior roll cage visible once assembled. Sponsor and event markings such as ALPINE RENAULT, elf and Rallye Monte-Carlo graphics help define the period look, and details like mirrors, wipers, bumper elements and the rear registration complete the replica with a more finished, event-ready appearance. On a shelf, desk or in a display cabinet, the 1:8 scale gives the Alpine A110 enough presence for the livery and body lines to read clearly at a glance. During the build, the extended part count and stated 14 Years age marking place the focus on careful assembly and on recreating a specific rally car rather than a quick snap-together project. Warning! Not suitable for children under 14 years.
Diecast model kits
iXO Premium Collectables Citroen C4 WRC 1:8
520010120€1,049.99
iXO Premium Collectables presents the Citroen C4 WRC in 1:8 scale as a large-format rally car model with 1004 parts and the unmistakable red 2008 Rallye Monte-Carlo livery. The long body, white rally wheels, roof scoop and rear wing give the silhouette the planted stance of a works WRC machine, while the larger scale leaves room for finer visual depth across the panels and openings. The exterior carries race number 1 together with Citroen, Total, Pirelli and event markings taken from the Monte-Carlo car. Open the bonnet and the engine bay comes into view with visible mechanical detailing and ducting under the panel. Open the side doors and the cabin shows its competition-focused layout, including the stripped interior and roll cage visible through the glazing. Lift the rear hatch and the rear compartment adds another layer of realism, extending the view beyond the body surface into the structure of the rally car. On a shelf, desk or in a display cabinet, the model reads clearly from every angle thanks to the contrast between the red bodywork, dark aero elements and white wheels. The 2100-minute assembly time suits a build that unfolds across many sessions, with the finished Citroen C4 WRC rewarding close viewing through its opening sections and event-specific decoration. Warning! Not suitable for children under 14 years.
Diecast model kits
iXO Premium Collectables Mercedes W196 Model 1:8
520010118€1,049.99
The iXO Premium Collectables Mercedes W196 in 1:8 scale brings a classic Grand Prix racing car into a large-format build with 451 parts and the distinctive number 8 livery. Its silver finish, long curved body and open-wheel layout give the model the unmistakable silhouette of a mid-century single-seater, while the Mercedes star on the grille adds a precise marque detail at the nose. Close viewing reveals details that shape the character of the car, including wire-spoke rims, exposed black tyres, side exhaust pipes and a small clear windscreen ahead of the cockpit. The open seating area is finished with a red tartan plaid seat, adding a striking interior accent against the metallic bodywork. Assembly is required, and the stated build time is 2100 minutes. The model is marked for ages 14 Years and up. On a shelf, desk or in a display cabinet, the 1:8 format gives the flowing fenders, rounded tail and narrow racing profile room to stand out from multiple angles. The finished Mercedes W196 suits collectors drawn to historic motorsport subjects and builders looking for a substantial project with a strong visual payoff once complete. Warning! Not suitable for children under 14 years.
Diecast model kits
iXO Premium Collectables Routemaster Bus 1961
520010124€1,049.99
IXO Routemaster Bus 1961 brings a well-known historic bus subject into a 1:12 collector scale that gives the model a strong visual presence. The large format helps the proportions of the 1961 vehicle read clearly, making the body shape and overall silhouette easy to appreciate in a display setting. Within the iXO Premium Collectables line, the focus stays on the named vehicle itself rather than on play features or electronic functions. The model is presented as a dedicated Routemaster Bus 1961 release, which gives collectors a clearly defined subject with a specific year reference. The 1:12 scale places it in a larger display category than many compact replicas, so details of the bus form can carry more impact at a glance. An age marking of 14 Years is stated for this model. Batteries are not included. Placed on a shelf, in a cabinet, or alongside other transport replicas, the Routemaster Bus 1961 adds a distinct public transport subject to a collection. The historic 1961 designation and the bus format create a different visual rhythm from passenger cars or racing replicas, making it a strong centrepiece for display-focused model assortments.
Diecast model kits
IXO Subaru Impreza Rally MC 2003 Model 1:8
520010110€1,049.99
The IXO Subaru Impreza Rally MC 2003 brings Monte Carlo rally character into 1:8 scale with a die-cast metal body, race number 7 and the blue and yellow Subaru World Rally Team livery. Gold wheels, a large rear wing and the hood scoop give the silhouette the same competition-focused shape seen on the 2003 car, while the finished model creates a strong display piece with visible motorsport detail from every side. This kit is built from 859 parts, and the stated assembly time of 2100 minutes points to a substantial construction project rather than a quick weekend build. Opening doors and an opening hood add more than surface detail by exposing the cockpit, roll cage and engine bay once the model is complete. Through the clear windows, the interior shows racing seats and cabin structure that match the rally specification. Across the body, printed sponsor graphics, event markings and the Solberg and Mills name panels sharpen the period look without relying on generic decoration. On a shelf, desk or in a display cabinet, the 1:8 format gives the body lines, wheel design and competition graphics room to stand out. During the build, the large scale supports close attention to the bodywork, interior and mechanical areas, making the finished Subaru just as engaging to examine with the hood or doors open as it is when displayed closed. Warning! Not suitable for children under 14 years.
Military aeroplane models
Jaguar T.2 R.A.F. Trainer Aircraft Kit 1:72
510001470€22.49
The Italeri Jaguar T.2 R.A.F. Trainer brings a distinctive Royal Air Force aircraft into 1:72 scale as a detailed plastic kit with the long, low lines and tandem cockpit layout of the 2-seat trainer version. Built around the Jaguar airframe developed through a French and British aviation collaboration in the 1960s, this subject combines training history with the sharp presence of a fast jet on the bench and in the display cabinet. The T.2 version was developed for the operational conversion of RAF pilots, which gives this aircraft a specific role beyond a standard single-seat strike aircraft. In service, the Jaguar was powered by 2 turbojet engines and could reach speeds beyond Mach 1.6, a detail that adds weight to the finished model's compact shape and swept-wing stance. Unlike the single-seat version, the T.2 carried a single 30 mm Aden cannon, adding another authentic configuration point for builders who value variant accuracy. The included decal sheet supports 4 versions and covers roundels, serials, stencil markings and special anniversary graphics. A stated assembly time of 600 minutes places this kit firmly in the hands-on model building category rather than quick assembly. The finished aircraft suits painted display alongside other Cold War and modern RAF subjects, and the marking options allow different squadron and commemorative finishes within the same Jaguar T.2 theme. Suitable for ages 14 years and up. Warning! Not suitable for children under 14 years.
Model car kit
Jaguar XJ 220 Race Car Model Kit 1:24
510003669€39.99
The Italeri Jaguar XJ 220 Race Car model kit in 1:24 scale brings one of the most recognisable high-speed Jaguar designs into a detailed build with clear motorsport character. Based on the race version of the XJ 220, the model combines the car's low aerodynamic profile with competition styling that stands out once assembled and finished. The full-size Jaguar XJ 220 set a production-car top speed record of 350 km/h between 1992 and 1994, and this kit draws on the same era of engineering and racing ambition. The subject traces back to an internal Jaguar project driven by employee ideas rather than a standard commercial brief, giving the car a distinct place in performance-car history. A racing version of the XJ 220 went on to appear in GT competition, including the 24 Hours of Le Mans, which gives the livery and body treatment on this kit a strong period context. New parts, rubber tyres, chromed parts and a super decals sheet support a finish with layered visual detail. On the workbench, the 1:24 scale format gives space to paint body panels, apply markings with care and build up the race car's presence step by step. Once completed, the Jaguar XJ 220 Race Car suits display alongside other endurance and GT subjects from the same period. Recommended age: 14 years+ Warning! Not suitable for children under 14 years.
Model tanks
Josef Stalin JS-2 model kit in 1:56 scale
510015764€21.49
The Josef Stalin JS-2 from Italeri brings a World War II heavy tank into a detailed 1:56 model kit with a finished length of 180 mm. Its compact scale keeps the build manageable while still giving the casted hull, central turret and long-barrelled main gun a strong presence once assembled. This release is based on a 100% new mould, giving the parts a fresh tooling foundation for the JS-2 shape. The subject represents the heavy tank developed after the KV series, created to equip Red Army tank regiments against German Tiger and Panther tanks. The original vehicle combined heavy armour with a 12-cylinder diesel engine rated at 600 HP and a total weight of 46 tons. Those defining features give the model a clear mechanical and historical identity rather than a generic tank outline. On the bench, the 1:56 format suits compact military displays and diorama scenes where armour, terrain and figures need to share space cleanly. Once completed, the Josef Stalin JS-2 fits naturally into World War II collections focused on Eastern Front operations, the liberation of Ukraine, the campaign in Hungary or the Battle of Berlin. 14 years and up Warning! Not suitable for children under 14 years.
Military aeroplane models
Ju 87 B-2/R-2 Stuka Picchiatello Model Kit
510002769€41.99
The Italeri Ju 87 B-2/R-2 Stuka Picchiatello model kit brings one of the most recognisable World War II dive bombers into 1:48 scale with a finished length of 22.9 cm. Its inverted gull wing layout and Regia Aeronautica identity give the aircraft a distinctive silhouette on the workbench and in a completed display. This assembly kit is designed for builders aged 14 years and up and centres on the Italian Picchiatello version of the Ju 87 used in operations over Malta, North Africa, the Balkans and the Mediterranean theatre. Recessed panel lines help define the airframe surface during painting and weathering. The coloured instruction sheet supports the finishing process with clearer visual guidance while the included assembly kit format leaves room for a hands-on build that develops step by step over the stated 600 minutes of assembly time. Decal options cover 5 versions, giving scope to recreate different markings and unit identities from the aircraft's service history. On the bench, the combination of photo-etched parts, detailed surface engraving and extensive markings supports careful painting, decal placement and final finishing. Once completed, the model suits an aircraft shelf, a World War II aviation collection or a diorama setting that highlights the Stuka's unmistakable wing shape and dive bomber profile.
Military aeroplane models
Junker Ju-87G-1 Stuka Kanonenvogel Model Kit
510002830€37.99
The Junker Ju-87G-1 Stuka Kanonenvogel model kit brings one of the most recognizable WW2 aircraft types into 1:48 scale, combining the Stuka's gull wing silhouette with the tank-hunting layout that defined the Ju-87G variant. Underwing 37 mm Flak 18 cannon pods give this version its distinctive anti-armor profile and create a striking focal point once the aircraft is fully finished. This assembly kit is based on the late-war Ju-87G, developed for operations against armored vehicles on the Eastern Front after 1943. The airframe is shaped around fixed landing gear, a glazed cockpit canopy, rear defensive gun position and the characteristic wing form associated with the Stuka family. A photo-etched fret supports finer detailing on selected sections, while the super decals sheet provides markings for 4 versions. The combination of structural parts, metal detail elements and alternate markings gives the build room for careful painting and finish work across camouflage, insignia and unit codes. At 600 minutes assembly time, the project suits longer workbench sessions where fitting, surface preparation and decal application can be handled step by step. The finished aircraft works well as a display build that highlights the Ju-87G's specialized ground-attack configuration and its place in military aviation history. Paints are required separately. Warning! Not suitable for children under 14 years.
Model motorcycles
KDF. 1 Typ 82 Kübelwagen model kit 1:9 scale
510007405€104.99
The Italeri KDF. 1 Typ 82 Kübelwagen brings one of the best known military utility cars of the Second World War into a large 1:9 scale model kit with a finished length of 41.5 cm. That size gives the flat body panels, open cabin layout and compact field-car proportions the space to read clearly on the bench and in a display setting. The build focuses on mechanical and visual detail rather than a simplified shell. The chassis uses working suspensions, and the steering front axle adds a functional element that remains visible after completion. An opening lid reveals a highly detailed engine, giving the rear-mounted power unit a clear place in the finished presentation. The kit also features a canvas roof with windows, reflecting the vehicle's distinctive soft-top configuration. A highly detailed decal sheet provides markings for 4 versions, supporting different finishing directions across the same base vehicle. Assembly is required, with a stated assembly time of 600 minutes. The completed Kübelwagen suits display scenes that highlight historic military vehicles, workshop-style presentation with the lid opened to show the engine, or a clean shelf setup that lets the 1:9 scale and 41.5 cm length stand out. Paints, cement and tools are required separately.
RC servos
KO BSx4S-one10 Grasper2, Models Supplies
505030216€174.99
KO BSx4S-one10 Grasper2 appears in the supplied conformity data as an electronic component within models supplies, carrying the exact designation KO BSx4S-one10 Grasper2 LP/MG/12,1/0,11. That precise naming helps place it within a hobby setup where exact component matching matters. The available data is technical rather than promotional, so the description stays close to what is verifiable. The component is listed under Models & Accessories and Models Supplies, with a 14 Years age marking in the source data. Battery inclusion is stated as false, which means no battery is named as part of the included contents here. The documentation also records an EU declaration of conformity issued under the manufacturer's responsibility, with references to 2014/30/EU, 2011/65/EU and 1907/2006. Harmonised standards EN55014-1:2021 and EN55014-2:2021 are named in that declaration. For model-building enthusiasts, this kind of exact designation supports careful parts selection when maintaining, replacing or specifying electronics in a compatible RC build. The source data does not provide further functional specifications, dimensions or included accessories, so the focus remains on the documented identity and compliance references of the component. Warning! Not suitable for children under 14 years.
RC servos
KO BSx4S-one10 Grasper2, servo, one10
505030220€184.99
The KO BSx4S-one10 Grasper2 brings a focused servo setup to one10 RC builds, combining a 0.12-second transit speed with a 33 torque rating for direct control input in running and tuning sessions. Its STD and MG specification places it in the standard-size class with metal gear construction, a combination that fits the practical demands of hobby-grade model sport use. Within an RC chassis, the servo is the link between radio command and mechanical movement, and that role makes speed and consistency central to the driving feel. This unit is intended for model applications where steering accuracy or throttle actuation needs a compact, dedicated control component rather than a generic replacement. The 4S designation in the name identifies the series variant, while the one10 reference ties the servo to the widely used 1:10 model class. Batteries are not included. In workshop use, the servo suits fresh assemblies, drivetrain updates and targeted replacements where a standard-format control unit is needed. On the track or during car park running, it supports clean directional changes and controlled input transfer through the steering or throttle linkage, giving hobby builds a clearly defined electronic control element. Warning! Not suitable for children under 14 years.
RC servos
KO ESC VFS-FR3, speed controller, 120A brushed
505040456€84.99
The KO ESC VFS-FR3 brings a dedicated electronic control unit into brushed RC drivetrains, pairing a 120A rating with a no-limit brushed specification for demanding model setups. In a chassis build or an electronics refresh, this component sits at the centre of throttle control, linking motor response to the rest of the vehicle's drive system. As a speed controller in the Models & Accessories range, it belongs to the technical side of RC model building rather than to body styling or decoration. The brushed layout makes it relevant for hobby projects built around brushed motor systems, where the controller choice shapes how power is managed during acceleration and running. The supplied conformity information states compliance with 2014/30/EU, 2011/65/EU and 1907/2006, with EN55014-1:2021 and EN55014-2:2021 named in the declaration. Batteries are not included. On the bench, the VFS-FR3 fits naturally into upgrade work, replacement tasks and fresh electronics installations for RC vehicles. It suits builders aged 14 years and up who are selecting drive components by specification and who want a clearly identified brushed controller for workshop-based model projects.
RC servos
KO ICS-USB Adapter HS Servo/ESC Software
505061028€34.99
The KO ICS-USB Adapter HS Servo/ESC Software adds a direct computer link for supported model electronics setup. Built for use with KO HS servo and ESC software, it connects compatible components to a PC-based software environment where settings can be adjusted with more precision than through on-model controls alone. This accessory belongs in the model workshop where electronic behaviour is tuned to match the chassis, surface and driving style. Servo response, ESC parameters and related software-based adjustments can be handled through the adapter when used with supported systems. Its USB connection makes it a practical bridge between model electronics and screen-based setup work, keeping repeated changes organised during testing or maintenance. Batteries are not included. On the bench before a run, the adapter supports structured setup sessions for supported servo and ESC combinations. It also fits ongoing maintenance work when electronics need reconfiguration after component changes, helping hobbyists return to a known setup with less guesswork. Warning! Not suitable for children under 14 years.
RC receivers and accessories
KO KR-420XT 2.4GHz, receiver, 4-channel
505021014€119.99
The KO KR-420XT 2.4GHz receiver brings a focused electronics component into RC model setups with 4-channel control and a compact format suited to tight installation spaces. In a vehicle build where every millimetre matters, this short receiver layout helps keep the radio system neatly arranged while maintaining the core link between transmitter input and onboard response. As a dedicated receiver, the KR-420XT sits at the centre of signal transfer inside the model and supports the coordination of steering, throttle and further switched or proportional functions across 4 channels. The 2.4GHz specification points to modern radio operation within compatible systems, while the clearly stated KO KR-420XT designation helps when planning replacements, system updates or workshop organisation. This is a component-led choice for hobby benches that rely on exact matching rather than generic electronics swaps. Installed in an RC vehicle, the receiver becomes the quiet control hub behind each driving command, from first system setup to regular running sessions. The 14 years age marking is stated for this hobby component, fitting model-building environments where radio equipment is selected and integrated as part of a broader technical setup. Warning! Not suitable for children under 14 years.
RC remote controls
KO MC-8 TR Set, radio set, 8-channel 2.4 GHz
500501041€119.99
The KO MC-8 TR Set brings compact 8-channel radio control to function-rich RC installations, combining the MC-8 transmitter, the MR-8 receiver and the Xpansion keypad in one coordinated setup. With 2 dual thumb sticks, channels A to H and trim controls for channels A to D, the layout supports direct command over steering, drive and additional assigned functions while keeping the controller body easy to handle. The top keypad extends the system with dedicated inputs for functions shown on the panel, including light position, hazards, left and right turn signals, horn, main beam and engine-related commands on compatible vehicle systems. The MR-8 receiver provides 8 channel ports marked A to H plus a battery connection, giving hobby builds a clear structure for wiring multiple functions into one radio system. The set operates at 2.4 GHz and is specified for 4.8-6 Volt, matching common RC electronics layouts. Age 14 Years. This configuration suits scale trucks, special-function vehicles and other hobby builds where more than basic steering and throttle are part of the driving session. Lighting, signal and sound functions can be called up directly from the transmitter, so complex model setups stay manageable during operation. Warning! Not suitable for children under 14 years.
RC servos
KO Neo Advantage Capacitor+, ESC accessory
505045565€35.99
The KO Neo Advantage Capacitor+ for BL ESC is an RC electronics accessory aimed at hobby-grade model setups, with a clear focus on brushless ESC applications. Its compact add-on role suits enthusiasts who fine-tune existing vehicles and control systems rather than starting with a complete ready-to-run package. Placed in the Models & Accessories and Models Supplies range, this component belongs to the technical side of RC building, where each part is chosen for a specific task in the drivetrain or control layout. The supplied compliance record identifies the KO Neo Advantage Capacitor+ for BL ESC by name and documents EU declaration of conformity references to 2014/30/EU, 2011/65/EU and 1907/2006. Harmonised standards EN55014-1:2021 and EN55014-2:2021 are also listed in that record. Batteries are not included. In practical workshop use, this kind of accessory fits into upgrade, maintenance and replacement routines around brushless speed controller installations. It suits RC benches, pit boxes and parts collections where dedicated electronics components are selected to match an existing model setup. The age marking is 14 Years. Warning! Not suitable for children under 14 years.
RC servos
KO PDS-2503 SLP, servo, 7.4 V response unit
505030067€43.99
The KO PDS-2503 SLP is a response servo built for RC model setups that call for quick, direct control signals. With a stated response speed of 0.12 at 7.4 V, it brings a technical specification that matters when steering input or throttle actuation needs to register with minimal delay in a 14 Years hobby environment. As a dedicated servo unit, it belongs at the heart of the control system, translating radio commands into mechanical movement inside the model. That makes it a relevant choice for enthusiasts refining handling characteristics, replacing a worn control component, or planning a fresh electronics layout around a defined voltage figure. The supplied data also confirms that batteries are not included, so any wider power setup remains dependent on the surrounding RC installation rather than on this single component alone. In workshop use, the KO PDS-2503 SLP fits projects where response speed and voltage compatibility are key selection points before the first run. It also suits upgrade work on existing RC models, where a clearly specified servo can help shape a more exact control feel during setup and driving sessions. Warning! Not suitable for children under 14 years.
RC servos
KO PDS-2513 SLP/MG Servo, RC servo unit
505030068€62.99
The KO PDS-2513 SLP/MG servo adds a defined control component to RC model setups, with a stated 9.6 V rating and a response speed of 0.13. In a chassis where steering or throttle inputs need a dedicated electronics unit, that combination gives model-building enthusiasts a clear technical basis for planning a replacement or a fresh installation. As part of the Models & Accessories range, this servo sits in the electronics side of an RC build rather than the body or drivetrain. The KO PDS-2513 SLP/MG designation helps identify the unit accurately when matching parts within an existing setup. The supplied product data also confirms an EU declaration of conformity for this servo, with references to 2014/30/EU, 2011/65/EU and 1907/2006, plus the harmonised standards EN55014-1:2021 and EN55014-2:2021. That gives the component a documented compliance basis alongside its stated electrical specification. On the bench, the servo fits naturally into repair work, electronics upgrades or a planned RC build that needs a named control unit rather than a generic placeholder. It also suits spare-parts storage where exact model identification matters before installation in a compatible RC system. Warning! Not suitable for children under 14 years.
RC servos
KO PDS-2516 SLP/MG, Power Servo, RC servo
505030069€62.99
The KO PDS-2516 SLP/MG Power Servo is an RC servo component aimed at model-building enthusiasts who want a clearly identified electronics part for a fresh build, a workshop replacement or a tuning project. Its designation combines the KO PDS-2516 SLP/MG name with the technical references 10.8 and 0.16, giving the servo a distinct place in parts searches and component matching. Within an RC setup, a servo converts control signals into mechanical movement, making it a central link between radio commands and the steering or throttle function of the model. That makes the exact designation especially relevant when an existing setup calls for a specific servo format rather than a generic substitute. The data also confirms that batteries are not included. An EU declaration of conformity is documented for this electronic component, with conformity references to 2014/30/EU, 2011/65/EU and 1907/2006, plus EN55014-1:2021 and EN55014-2:2021. This servo fits naturally into workshop benches, rebuild sessions and electronics upgrades where the right named component keeps a project moving without guesswork. For hobbyists comparing replacement parts, the KO PDS-2516 SLP/MG designation provides a concrete reference point when matching an RC model's installed control hardware. Warning! Not suitable for children under 14 years.
RC servos
KO RSx4S-one10X, servo, low profile metal gear
505030147€124.99
The KO RSx4S-one10X brings a low-profile servo layout and metal-gear construction into a compact steering component for RC model setups. With its stated 11.8 V specification and 0.10-second transit figure, it is positioned for fast, direct response in electronics packages that call for a space-saving servo format. Its low-profile housing suits chassis arrangements where vertical clearance is limited and a compact installation matters for the overall build. The metal gear train gives the steering mechanism a defined mechanical path from servo output to linkage, which supports consistent input transfer under repeated direction changes. The designation in the source data identifies this as a servo rather than a complete vehicle, so the focus stays on steering performance and integration into a compatible RC platform. No batteries are included. In use, this kind of component fits competition-oriented touring car and one10 model projects where quick steering correction and tidy packaging are part of the setup brief. It also suits rebuilds and electronics upgrades that call for a low-profile servo with a high-voltage specification and a fast stated response figure. Warning! Not suitable for children under 14 years.
RC servos
KO RSx4S-Power H.C, servo, 1:8 RC model
505030145€174.99
The KO RSx4S-Power H.C brings competition-focused servo hardware into 1:8 RC model setups with a stated 26.3 torque figure and 0.13 second speed. In the standard STD/MG format, it is aimed at hobbyists who tune steering response with the same care as chassis balance and drivetrain setup. Its specification points clearly toward demanding RC use: the 4S-ready design suits higher-performance electronics layouts, while the metal gear construction focuses on direct power transfer inside the servo case. The combination of speed and torque supports fast steering corrections through technical sections, tighter line placement in corners, and more consistent response when track grip changes. Because the data identifies this unit as a servo rather than a complete vehicle, it fits naturally into custom builds, race maintenance, and targeted replacement work where a defined control component is needed. Batteries are not included. On the bench, the KO RSx4S-Power H.C suits builders comparing servo characteristics for a 1:8 buggy, truggy, or other RC model in that scale class. At the track, the stated figures support setups where quick input transfer and firm steering authority shape how the model reacts lap after lap. Warning! Not suitable for children under 14 years.
RC servos
KO Servo Model Selector, servo accessory
505061032€18.59
The KO Servo Model Selector for 4S BS/RSx4S adds a dedicated control accessory to the electronics side of an RC setup, giving model-building enthusiasts a focused way to work with compatible servo configurations. Built around KO 4S BS and RSx4S compatibility, it fits naturally into bench preparation before a chassis heads to the track. Instead of changing hardware across different builds, this selector is made to support model-specific servo selection within the stated KO system. That makes it a useful addition when several RC models share the same electronics platform but call for different setup choices. The compact accessory role also keeps the emphasis on tuning and configuration rather than on major component swaps. Minimum age is 14 Years. Batteries are not included. On the workbench, the selector suits organised setup sessions where electronics are matched to a fresh build or adjusted between running days. It also fits trackside preparation, where a compatible servo system can be configured with a more deliberate, model-led approach before driving begins. Warning! Not suitable for children under 14 years.
RC remote controls
KO Trigger Pad Set, model accessory
505010647€10.59
The KO Trigger Pad set is a model accessory from the Carson Modelsport range, listed with the exact designation used in the product data. With an assembly time unit in minutes, a voltage unit in volt, a maximum speed unit in km/h and a maximum operating time unit in minutes present in the data structure, the available verified detail for this entry remains focused on the accessory name itself rather than on technical fitment or performance figures. That makes the strongest, most reliable description a precise one: KO Trigger Pad set identifies a specific spare or replacement component for model-related equipment, and it belongs in a parts selection built around exact naming. The data confirms that batteries are not included and gives an age marking of 14 Years. No further verified information is provided here on compatibility, dimensions, material composition, included quantity, or supported systems, so those points are left unstated rather than guessed. Within a hobby bench, workshop drawer or model maintenance setup, an exactly named accessory set helps keep existing equipment in service and supports targeted parts searches when a matching component is needed. The entry is therefore written around the confirmed designation and the clearly stated 14 Years age marking, without inventing fitment details that the data does not supply. Warning! Not suitable for children under 14 years.
RC receivers and accessories
KR-242XT 2.4GHz, receiver, 4-channel
505021020€74.99
The KR-242XT 2.4GHz receiver brings a compact 4-channel control unit into RC model setups where clean signal transmission and dependable channel allocation matter. With 4 channels available, the receiver supports core driving functions such as steering and throttle while leaving room for additional switching tasks in more detailed electronics layouts. Its KO 4CH Receiver KR-242XT 2.4GHz designation places it clearly as a dedicated radio component rather than a general accessory, which helps when planning a compatible control system around separate onboard electronics. The 2.4GHz frequency is the standard basis for modern RC operation, suited to model installations that need stable wireless communication in a compact format. The data states that batteries are not included. Minimum age 14 years is specified for this receiver. An EU declaration of conformity is provided for the unit, with cited standards including EN 301 489-1 V2.2.3, EN 301 489-3 V2.3.2, EN 300 440 V2.2.1, EN 55014-1:2021, EN 55014-2:2021 and EN 62479:2010. This receiver fits naturally into hobby workbench sessions focused on configuring RC electronics and refining a vehicle's control layout. It also suits replacement or upgrade use in model projects where a 4-channel 2.4GHz unit is the required basis for the radio system. Warning! Not suitable for children under 14 years.
RC receivers and accessories
KR-420XT 2.4GHz, receiver, 4-channel unit
505021013€119.99
The KR-420XT 2.4GHz receiver brings 4-channel control into RC model setups with a compact electronics unit built for organised signal handling. In a chassis, boat hull or other hobby installation, the receiver forms the link between transmitter commands and the connected control functions, keeping the layout focused on the essentials of steering, throttle and added channel tasks. As an RC electronics component rather than a ready-to-run vehicle, this unit suits projects where the radio system is chosen part by part. The 2.4GHz specification places it in the current standard for model control, while the 4-channel format opens room for more than the basic drive inputs alone. That can support switching functions, auxiliary movements or other channel-based actions when the wider setup is matched accordingly. The product data also states a minimum age of 14 years and confirms EU declaration of conformity documentation for the receiver. In practical use, the KR-420XT fits workshop builds, replacement installs and electronics upgrades where an existing RC model needs a compatible receiving unit. It also suits fresh hobby projects that start with the radio layout first and are then completed around the selected control system. Warning! Not suitable for children under 14 years.
Military figures & accessories
La Haye Sainte Battle Set 1:72 Waterloo 1815
510006197€74.99
The Italeri La Haye Sainte Battle Set brings the decisive atmosphere of Waterloo 1815 into a 1:72 scale model scene built around the farm that stood at the centre of Wellington's defensive line. At 56 x 41 cm, the MDF laser cut La Haye Sainte complex creates a substantial base for arranging troops, artillery and command figures in a layout that reflects one of the most contested points of the battle. The assembly kit combines several force groups rather than a single unit, giving the scene a broader historical structure. Contents include Napoleon General Staff, 13 horses and 21 figures, 32 French Infantry figures, French Imperial Guard artillery with 2 guns and 8 figures, 16 British Infantry figures, 16 British 95th rifles figures, and British artillery with 2 guns and 8 figures. The mix of mounted command, line infantry, riflemen and gun crews allows different battlefield relationships to be staged across the farm buildings and surrounding ground. Assembly is required, with a stated assembly time of 600 minutes. This format suits builders who enjoy painting uniforms, arranging formations and shaping a historical diorama with architecture as well as troops. Radio gear, a battery pack, a charger and paints are required separately would not apply here; paints are required separately. Once assembled, the set lends itself to shelf display, battle re-creation or integration into a larger Napoleonic tabletop setting. Warning! Not suitable for children under 14 years.
Model car kit
Lancia DELTA 16VHF integ Sanremo'89 Model Kit
510004712€189.99
Italeri Lancia DELTA 16VHF integ Sanremo'89 is a detailed 1:12 plastic kit that recreates one of rallying's defining competition cars with the red Sanremo 1989 bodywork, flared arches and Martini race livery. The large scale gives the shape, vents and competition proportions room to stand out once the parts are assembled, painted and finished. This assembly kit is built around a body with opening front doors plus front and rear bonnet sections, allowing the finished model to show both the exterior form and the mechanical areas beneath. The engine bay is reproduced in detail, and the interior is developed with the same focus, reflecting the competition layout visible through the glazing. Photo-etched parts and chromed components sharpen smaller trim areas, while black acetate mud splash guards add another material contrast to the rally specification. The set also contains 2 super decal sheets for exterior markings and composite material details, supporting a more complete Sanremo 1989 finish. With an assembly time of 600 minutes, the build suits a slower, workshop-style pace where body preparation, painting and decal placement can be handled in stages. Paints are required separately, and the finished model brings the character of the Lancia Delta HF Integrale into a format that rewards careful detailing on a desk, in a hobby room or as part of a motorsport display. Age 14+
Model car kit
Lancia Delta HF Integrale 16V Model Kit 1:12
510104709€189.99
The 1:12 Lancia Delta HF Integrale 16V model kit brings one of rallying's defining shapes into a large display scale with 100% new moulds, opening panels and a body that carries the muscular arches and bonnet air inlets of the competition car. Assembled in this size, the hatchback proportions, race-focused surfaces and period livery details stand out clearly on a shelf or workbench. The kit is designed around visual and mechanical detail rather than a simplified curbside build. Photo-etched parts and chromed elements sharpen smaller accents, while the accessories set with hoses, screws and springs adds extra depth to the finished assembly. Two decal sheets supply exterior markings and composite material details for a richer motorsport finish. Inside, the detailed interior and faithful engine bay reproduction extend the build beyond the outer shell, and the opening front doors plus front and rear bonnet sections keep those areas visible after completion. Working suspensions, rubber tyres and steering wheels reinforce the character of the finished car and help the model sit with the planted look associated with the Delta HF Integrale 16V. The stated assembly time is 600 minutes. Paints, cement and tools are required separately. With a minimum age marking of 14 years, this kit suits focused building sessions and a finished display that rewards close viewing from every side.
Model car kit
Lancia Fulvia coupe 1:24 model kit by Italeri
510003619€42.99
Italeri brings the Lancia Fulvia coupe 1.6 HF Fanalone into 1:24 scale as a detailed model kit shaped around one of the most recognisable Italian sports coupes of the late 1960s. The compact proportions and crisp coupe silhouette give the finished build a strong period presence, echoing a road car known for attractive styling, notable performance and broad commercial success across several countries. The original Fulvia evolved over time in both design and engine range, and this version draws on the legendary HF line derived from the road-going car. In the full-size vehicle, a 1,300 cc narrow-angle V4 sat in a front longitudinal layout and worked with front-wheel drive, a technical combination that marked the model out in its era. That engineering background gives the subject real historical depth, while the kit format keeps the focus on assembling and presenting the car's distinctive form. The full-size coupe also paired compact exterior dimensions with notably efficient use of cabin space, adding another layer to the character behind the model. On the worktable, the subject suits builders who enjoy classic European motoring themes and landmark coupe design from the 1960s. Once assembled, the model sits comfortably in a collection centred on rally history, Italian marques or road cars with strong engineering identity. Warning! Not suitable for children under 14 years.
Model car kit
Lancia HF Integrale 1:24 Scale Model Kit
510003658€36.99
The Italeri Lancia HF Integrale in 1:24 scale turns a landmark rally car into a detailed assembly project with a finished model length of 16.0 cm. Its compact size and competition-focused shape bring the Delta's wide-arched stance, bonnet intake, and purposeful body lines into a format that suits both the workbench and a display shelf. This assembly kit draws on the HF Integrale era that followed the Delta HF 4WD and carried Lancia through the World Rally Championship between the late 1980s and early 1990s. The real car's 1995 cm3 turbocharged engine reached 185 hp, and that motorsport background gives the build clear historical context while the modeler works through body preparation, paint, and final markings. The included components are supplied as an assembly kit, and the build time is stated as 600 minutes. A color instruction sheet helps track the sequence of construction and finishing. Minimum age: 14 years. On the bench, the project suits focused sessions spent test-fitting parts, applying the rally livery, and refining small visual details before the finished car takes its place in a collection. Once completed, the 1:24 replica carries the look of a Monte Carlo era competition machine, with the stance and graphics that made the HF Integrale a standout name in rally history.
Model tanks
Land Rover 109 "Guardia Civil" Model Kit 1:35
510006542€21.49
The Land Rover 109 "Guardia Civil" model kit in 1:35 scale brings the long wheel base Series III into a compact 12.5 cm display format, combining classic off-road proportions with the distinctive markings of a Spanish service vehicle. Upgraded moulds give the body and exterior details a cleaner base for painting, fitting and final finishing. This assembly kit draws on a vehicle known for its 4x4 traction system and aluminium body, features that shaped the Land Rover's role across demanding terrain and varied duties. The "Guardia Civil" version adds a specific historical setting, while the 3 decal options open different registration and marking layouts for the finished replica. The subject reflects the broad use of the Land Rover 109 in military and civilian service and connects the build to the Series III era introduced in 1971. Assembly is required, and the stated build time is 600 minutes. On the workbench, the 1:35 format suits careful painting sessions, detail work and measured decal application across doors, plates and insignia. Once completed, the model carries the upright stance, long body shape and utility character that made the Land Rover 109 a lasting reference point in off-road vehicle history.
Military ship models
LCM 3 Landing Craft Mechanized Model Kit 1:35
510006755€51.99
The Italeri LCM 3 Landing Craft Mechanized model kit in 1:35 scale brings one of the best-known Allied landing craft of World War II into a detailed build with a strong historical identity. Its bow loading ramp, open transport deck and compact armored control section capture the working layout that made the LCM-3 central to amphibious operations from Anzio to Normandy. The real craft was designed to move a fully armed infantry squad or a 30-ton Sherman tank, and that purpose shapes the model's broad, practical silhouette. The decal sheet supports 4 finishing versions, including Operation Neptune and Iwo Jima subjects, with hull codes, flags and detail markings for different service appearances. The kit also contains 3 figures, which help define the scale of the deck and stern fighting positions once the build is complete. Rope and cable details shown in the kit documentation add another layer of surface character across the hull, deck edges and fittings. Assembly is required, and the stated build time is 600 minutes. Paints are required separately. On a shelf, in a naval collection or as part of a World War II diorama, the finished LCM 3 reads as a purposeful landing craft rather than a generic boat. The lowered ramp, deck layout and alternate markings support scenes ranging from beach approach to unloading moments, while the 1:35 scale keeps the model substantial enough for close viewing of the smaller details. Warning! Not suitable for children under 14 years.
Model tanks
Leopard 1A5 WA 1:35 Tank Model Assembly Kit
510006481€34.99
The Italeri Leopard 1A5 WA in 1:35 scale turns a late Cold War main battle tank into a detailed assembly project, combining the long 105 mm L7 gun, the revised A5 turret and added polycarbonate armour plates in one focused build. The finished form carries the low, purposeful stance of the Leopard family, with broad tracks, layered side protection and the sharp turret geometry that defined this upgraded version. The kit centers on the A5 configuration, where the turret was modified to house computerized target identification and fire control systems. That change gives the model a distinct profile compared with earlier Leopard 1 variants and adds visual depth around the turret sides and roof. The tracked undercarriage uses multiple road wheels on each side, giving the hull its characteristic ground-hugging layout. Decal options support several service markings, including German, Italian and Greek vehicles, so the camouflage and insignia can be matched to different real-world references. A crew figure is also shown for Version C, adding another finishing option to the display. Across a 600 minute assembly, the build moves through hull structure, running gear, turret details and final markings in a steady sequence suited to model-making sessions at the workbench. Once completed, the Leopard 1A5 WA fits naturally into 1:35 military collections, diorama scenes or shelf displays where the upgraded turret and national marking choices can be read at a glance.
Model tanks
Leopard 2A4 Model Kit 1:35 with 5 Decal Versions
510006559€34.99
The Italeri Leopard 2A4 brings one of the most widely fielded modern main battle tanks into 1:35 scale, combining a 27.6 cm finished length with the low, angular profile that gives this vehicle its unmistakable presence on the shelf. As a detailed assembly kit, it turns the Leopard 2A4 into a hands-on build centered on hull structure, turret form, running gear and final finishing work. The subject reflects a tank family introduced between the late 1970s and early 1980s to replace the Leopard 1 in German service. Italeri bases this version on the Leopard 2A4, noted in the source material for its advanced fire-control system and updated protection layout. The main armament represented on the model is the 120 mm Rheinmetall L/55 smoothbore gun, a defining feature of the vehicle's silhouette. The kit also provides a super decals sheet for 5 versions, opening several marking paths across different operators. Figures are not included. Assembly kit contents are supplied for builders aged 14 years and over. At the workbench, the build suits careful painting, decal placement and detail-focused finishing, especially across the turret sides, hull panels and track assemblies. New gluable rubber tracks support the final look of the running gear, while the color instruction sheet helps guide camouflage and marking placement for the selected version. Assembly time is indicated as 600 minutes.
Model railways
Locomotive BR41 Model Kit in 1:87 HO Scale
510008701€19.99
Locomotive BR41 brings classic German steam power into HO scale with a 1:87 model kit that builds to 27.5 cm and pairs the locomotive with its tender. The finished form captures the long boiler, red running gear, spoked wheels and coal tender profile associated with the BR41, a class developed from 1936 for fast goods trains and later used on passenger services at speeds up to 90 km/h. The assembly kit is structured around distinct construction stages for the chassis, wheel positioning, boiler, cab and tender, giving each section its own place in the build. The instructions show multiple wheel sizes, side rods, upper body fittings, cab window inserts and a molded coal load for the tender, so the model develops through clearly defined mechanical subassemblies rather than a single shell. Decals allow finishing as 41 292, 41 220 or 41 270, adding a specific locomotive identity once painting and final detailing are complete. On a shelf, in a display case or alongside other HO rolling stock, the BR41 stands out through its steam-era proportions and linked wheel arrangement. The 600-minute assembly time suits builders who want a longer project with visible progress across the locomotive body and tender. Paints are required separately.
Model railways
Locomotive BR50 Model Kit 1:87 with Tender
510008702€19.99
Locomotive BR50 brings the character of a widely used German steam freight locomotive into H0/1:87 scale, combining a 26.6 cm finished length with the compact presence that suits model railway scenes and shelf display alike. The assembly kit pairs the locomotive with its tender, capturing the long boiler, enclosed cab, coal load and red running gear that define the BR50 silhouette. The subject draws on a locomotive class developed from 1937 for goods hauling on branch lines, with a low 16 t axle load that supported broad route use and running characteristics that allowed 80 km/h in both directions. Italeri translates that full-size engineering into a build centered on visible steam-era mechanics: spoked driving wheels, side rods, front truck components, boiler fittings, cab sections and tender details all come together through a staged construction process. The included decal sheet adds DB emblems, locomotive numbers, technical inscriptions and small warning symbols for a more specific finish once painting and final detailing are complete. With a recommended age marking of 14 years and over, the kit suits focused bench sessions where the chassis, body shell and tender can be assembled in sequence and finished with paintwork that highlights the contrast between the black upper structure and the red underframe. Paints, cement and tools are required separately.
RC truck accessories
Low Loader Control TLS-SH RX IR, RC control unit
500907712€159.99
Built for detailed 1:14 truck and trailer projects, the Low Loader Control TLS-SH RX IR adds electronic control to a compatible gooseneck low-bed trailer with steerable low-loader axles. The set combines a motor control unit for the gooseneck, a servo steering control unit and an IR receiver to connect the trailer functions into one coordinated system. The infrared link transfers signals from the gooseneck to the drop-bed section, so the steering and related trailer functions can be operated across the articulated layout. Included in the set are a steering sensor, an IR receiver for the steering unit, an IR transmitter for the gooseneck, a switch cable for motor control and a 4-pin connection cable. The electronics run on 7.4 to 12V DC, the BEC provides 5V DC at 5A for the steering servo, and the motor controller is rated for 7.4 to 12V DC at 5A. Compatible light functions can also be retrofitted through the available outputs for taillights, a rotating beacon and warning signs. This control set is designed for the CARSON gooseneck low-bed trailer 500907700 and for controlling steerable low-loader axles 500907699. Age 14 Years. A transmitter is required separately: the MFC-TLS transmitter for use with a TAMIYA MFC, or the UNI-TLS transmitter for third-party systems.
Model tanks
M1 155mm Howitzer with Crew Model Kit 1:35
510006581€28.49
The Italeri M1 155mm Howitzer with crew brings a key U.S. artillery piece into 1:35 scale with a finished model length of 20.9 cm and a full 6-figure gun crew. The combination of the howitzer, carriage and personnel gives the build a clear battlefield context, with the finished scene suited to a display base, a larger military diorama or a stand-alone artillery subject. This plastic kit represents the M1 155/23 howitzer first produced in 1942 as a medium artillery piece for the U.S. Army. The original gun could fire different ammunition types and had a maximum range of 14,600 meters, details that place the model firmly within mid-20th-century artillery development. The subject also offers a longer service story than a single wartime snapshot, as the M1 remained in use after World War II during the Korean War and the Vietnam War before replacement by the M198. That service span makes the kit relevant for several historical display settings and paint-finish approaches. During assembly, the model can be built in transport configuration or firing configuration, allowing different presentation angles for the split trail carriage and deployed gun position. Once painted and arranged with the 6 figures, the scene can suggest loading, positioning or gun-crew coordination on a field base. Model cement, tools and paints are required separately.
Model tanks
M110 Self Propelled Howitzer Model Kit 1:35
510006574€31.99
The Italeri M110 Self Propelled Howitzer brings a major U.S. Army artillery vehicle into 1:35 scale with a finished length of 25.8 cm and the long, elevated profile that defines the M110 A1. As a detailed assembly kit, it focuses on the tracked chassis, open gun platform and 203 mm M201 gun that gave the full-size vehicle its long-range field role. The M-110 series entered service in the 1960s, and the 1977 updates to the M-110 A1 improved operational efficiency while retaining the reliable chassis shared with the M-107. That historical basis gives the build a clear technical identity, from the rear spade arrangement used during firing positions to the broad tracked layout associated with self-propelled artillery. New gluable rubber tracks add flexibility during construction, while the decal sheet supports 4 different marking versions drawn from U.S. Army service. Figures are not included. Paints, cement and tools are required separately. On the bench, the combination of assembly, painting and decal placement creates a model with strong military presence, whether finished in a clean service look or with added weathering. The 600-minute assembly time suits a project built over several sessions, with each stage adding more definition to the gun mount, hull details and running gear.
Screws
M2 Ball Head Adjuster Set, model accessory, steel
500907587€7.29
Small linkage parts make a big difference when a model needs clean movement and precise adjustment. This M2 Ball Head Adjuster Set combines steel ball heads, matching adjusters and hex nuts in a 5-piece hardware set for articulated connections in model assemblies, where pivoting joints are needed instead of fixed mounting points. The steel ball heads use threaded shafts for fastening, while the separate hex nuts secure each mounting point from the back. The adjusters connect to the spherical heads as ball cups, creating joints that can move through changing angles during operation. The elongated hexagonal body shape gives a practical contact area during installation and alignment, especially where linkage geometry needs careful setup. With 5 matching connection sets in one pack, the hardware suits multiple mounting points within the same assembly or provides spare parts for maintenance work. This set fits naturally into steering linkages, suspension-style connections and other articulated mechanisms used in model building. It also works well for replacing worn joint hardware where free movement and a compact threaded fixing are required. Age marking: 14 years.
Screws
M3 Ball Head Adjuster Set, model accessory, steel
500907588€7.29
M3 hardware is a staple of many RC and model assemblies, and this set brings together 5 steel ball heads, 5 adjusters and 5 hex nuts in one matched group for linkage work. The ball studs fasten by threaded shaft and nut, while the socket-style adjusters connect over the ball heads to create a movable joint that suits steering, suspension or similar control linkages. The steel construction applies to the ball heads, giving the contact point a solid metal basis where repeated movement and secure fastening matter. Each adjuster uses an elongated hexagonal body shape that provides a defined grip area during fitting and alignment. With M3 sizing stated directly in the designation, the set supports replacement work on worn linkage points as well as fresh assembly on compatible model mechanisms. The 5-piece count of each main component keeps the hardware consistent across several connection points instead of mixing unmatched parts. On the bench, the set suits routine maintenance, targeted repairs and planned setup changes where a ball-joint connection is required. It also fits neatly into a spares assortment for model enthusiasts who keep common fastening and linkage sizes ready for ongoing workshop use.
Model tanks
M4A3E8 Sherman Fury 1:35 tank model kit
510006529€41.99
The M4A3E8 Sherman Fury in 1:35 scale brings one of the best-known late-war U.S. tank variants into a detailed assembly kit with a finished model length of 16.8 cm. Its Easy Eight configuration gives the build a distinct profile, combining the 76 mm M1 high velocity gun with the later suspension layout seen on this version. Production of the M4A3E8 started at the end of 1944, and this kit reflects the technical updates that set it apart within the Sherman family. The horizontal volute spring suspension, known as HVSS, was introduced to improve driving conditions and support higher speed on the full-size vehicle, adding a recognisable engineering feature to the miniature. Newly upgraded moulds help define the hull and turret surfaces with crisp structure for painting and finishing work. Decals for 3 U.S. versions expand the marking options, while the included T66 and T84E1 tracks give 2 distinct running gear choices. The new glueable rubber material can also be painted, which supports a more integrated finish across the lower hull and track sections. On the workbench, the combination of alternate tracks, historical markings and late-war Sherman details creates a build with clear choices at each stage. Assembly is required and takes about 600 minutes. Paints, glue and tools are required separately.
Model tanks
M6 Dodge Anti-Tank 1:35 scale model kit
510106555€20.99
The Italeri M6 Dodge Anti-Tank brings the Gun Motor Carriage M6 into 1:35 scale as a detailed assembly kit with a finished model length of 12.9 cm. Built on the Dodge WC52 4x4 frame and fitted with a rear-mounted 37 mm light anti-tank gun, it captures the distinct proportions of a fast, lightly armed World War II support vehicle. The subject draws on a vehicle used by the United States Army from late 1942 through the end of World War II across the Mediterranean, the European front and the Pacific. Its Dodge T-214 6-cylinder engine gave the full-size vehicle a road speed of 90 km/h, shaping the character of a mobile gun carriage rather than a heavy tank destroyer. The kit also includes 1 figure, adding a crew presence that can strengthen a static display or a wider wartime scene. A color instruction sheet supports the build process, and decals provide markings for 4 versions. On a shelf, in a desert campaign setting or as part of a broader Allied vehicle collection, the M6 Dodge Anti-Tank suits builders who want a compact military subject with clear historical identity. Assembly is required, with a stated build time of 600 minutes.
Model tanks
M7 Priest 1:35 Self-Propelled Howitzer Kit
510006580€31.99
The Italeri M7 Priest kit captures a key World War II self-propelled artillery vehicle in 1:35 scale, combining the M3 Lee-based hull with the distinctive 105 mm M2A1 howitzer installation. At 17.2 cm in finished length, the model brings the compact, purposeful silhouette of the M7 into a format that suits bench work, painting and display alike. The open fighting compartment gives the build a layered look, with the gun position and upper structure standing apart from a closed-turret tank layout. Historical context is built into the subject itself: the M7 entered operational use in 1942 and served with American forces, U.S. Marines and British troops, who gave the vehicle the nickname Priest because the front machine gun position resembled a pulpit. The kit also includes 1 figure, adding scale reference and extra scene detail once the model is finished. Assembly is required, with a stated build time of 600 minutes. Marking options support several directions for the final finish, whether the build is approached as a clean vehicle profile or as a more worked-in wartime display piece. The decal sheet covers 4 versions, including U.S. and British service variants, and the color instruction sheet guides the painting stage. Radio gear, a battery pack, a charger and paints are not part of this kit.
Model tanks
M8 Greyhound/M20 Armored UtilityCar 1:72 Kit
510007087€16.79
The Italeri M8 Greyhound/M20 Armored UtilityCar brings a key World War II reconnaissance vehicle into 1:72 scale as a detailed plastic kit. The compact format captures the shift from lightly armed scout cars to a more protected armored design, giving the build a clear historical identity on the workbench and in a finished display. The M8 Greyhound is defined in the source material by increased protection and heavier armament, including a 37 mm cannon mounted in the turret, while the M20 reflects the same vehicle family in utility form. This subject first saw service on the Italian front, from Monte Cassino to Anzio, and later took part in the D-Day operations in June 1944. The wartime record described for the vehicle adds context to the model, linking its shape and role to reconnaissance duties and ground troop support rather than presenting it as a generic armored car. At 1:72 scale, the kit fits naturally into military collections, dioramas and shelf displays where World War II vehicles share space by theatre, nation or vehicle type. The 14 Years age marking supports the fine, smaller-scale handling that this kind of detailed assembly calls for, whether the finished model stands alone or joins a broader Allied vehicle lineup. Warning! Not suitable for children under 14 years.
Model tanks
M923 Hillbilly Gun Truck Model Kit 1:35
510006513€31.99
The Italeri M923 Hillbilly Gun Truck model kit in 1:35 scale brings a modern U.S. logistical vehicle into a focused build with a finished length of 24.8 cm. Its subject is the M923 A-1, a 5 ton cargo truck that entered service in the early 1980s and became known for its large off-road tyres and adaptable platform. In this Hillbilly Gun Truck configuration, the base transport is reworked with field-style protective structures that give the silhouette a tougher, mission-specific character. The kit is built around upgraded moulds and an assembly layout that covers the long chassis rails, multi-axle running gear, cab interior, cargo body sections and gun truck conversion details. The parts map shows separate sprues for structural sections, wheel components and smaller fittings, plus a thin cable for added detailing. Alternative door-frame and side-pipe configurations allow the build to follow different assembly choices shown in the instructions. Decals for 1 version support the finishing stage with vehicle-specific markings. With 600 minutes of assembly time, this kit suits model builders who enjoy a longer project with visible progress across chassis, cab and rear body construction. The completed truck has the presence to stand out in a military vehicle line-up, whether placed in a convoy scene, a field workshop setting or alongside other 1:35 scale transport subjects. Minimum age: 14 years
Military aeroplane models
Macchi MC. 200 Series XXI-XXIII Aircraft Kit
510002767€35.99
The Italeri Macchi MC. 200 Series XXI-XXIII is a 1:48 aircraft kit centred on one of Italy's key Second World War fighter designs. Its monoplane configuration and all-metal airframe mark the step beyond the earlier Fiat CR 32 and Fiat CR 42 biplanes, giving the finished build a distinct silhouette with radial engine, fixed landing gear and compact fighter proportions. The subject represents the Macchi MC. 200 developed by Mario Castoldi and powered in service by the 14-cylinder Fiat A.74 RC 38 double-star engine rated at 840 HP, with the real aircraft reaching 500 km/h. The historical armament layout is reflected in the Series XXI-XXIII focus, covering versions with 2 12.7 mm Breda-SAFAT machine guns above the engine nacelle and later aircraft with 2 additional 7.7 mm Breda-SAFAT machine guns in the wings. Photo-etched parts bring extra definition to finer areas, while the decals sheet opens 6 finishing options with unit markings and camouflage references drawn from wartime service. Those 6 versions place the aircraft across several fronts, including Libya, Sicily, Ukraine and other theatres named for the Regia Aeronautica. The result is a build that suits careful painting, marking placement and historically specific finishing rather than a single generic scheme. Figure not included.
Military aeroplane models
Macchi MC. 202 aircraft model kit 1:32
510002518€104.99
The Italeri 1:32 Macchi MC. 202 captures the Folgore in a scale aircraft build shaped by the lines that made the original fighter stand out in Regia Aeronautica service. Its streamlined airframe and DB 601 engine installation define a silhouette built for speed, and the finished model carries that focused World War II character across the nose, canopy, tail wheel and wing profile. This assembly kit is based on the Macchi MC. 202, a fighter that reached 600 km/h and marked a clear step forward from earlier radial-engine designs such as the Fiat G-50 and Macchi Mc-200. Early aircraft were armed with 2 Breda-SAFAT 12.7 mm machine guns in the nose, while later versions added further wing-mounted machine guns, giving the type a distinct development history that can be explored through the included marking options. The set also contains cockpit 3D decals, smoke rings decals, photo etched parts and a super decals sheet for 8 versions. Figure not included. With 600 minutes assembly time, the build suits longer bench sessions focused on painting, fitting and finishing. The completed 1:32 aircraft works well as a display centrepiece alongside other World War II aviation subjects or as a single project built around Italian fighter history.
Military aeroplane models
Macchi MC.205 Veltro 1:32 Aircraft Model Kit
510002519€104.99
The Macchi MC.205 Veltro arrives as a 1:32 aircraft model kit that brings one of Italy's most respected World War II fighters onto the workbench in a format with strong visual presence. Its full designation stays tied to the historic airframe, while the large scale gives the fuselage, wings and undercarriage more room for careful painting, weathering and display-focused finishing. The subject represents the Macchi evolution of the Folgore and reflects the Series 5 fighter layout powered by the Daimler-Benz DB605 V12 engine, produced under licence by Fiat. In service form, that engine pushed the original aircraft to 640 km/h, and the armament combined 2 x 12.7 mm machine guns in the nose with 2 x 20 mm cannons in the wings. The kit is built as an assembly project and is marked for ages 14+. Figure not included. Assembly takes 600 minutes. Paints and cement are required separately. On the bench, the upgraded moulds and finishing extras support a more involved build, whether the focus is cockpit detail, canopy masking or choosing one of the 8 decal versions. Once completed, the Macchi MC.205 Veltro suits shelf display, diorama scenes on an airfield, or a line-up with other 1:32 military aircraft from the same era. Warning! Not suitable for children under 14 years.
Model trucks
MAN 26.321 Formel 6 6X4 truck model kit 1:24
510000756€61.99
The Italeri MAN 26.321 Formel 6 6X4 brings a classic long-haul truck into 1:24 scale with the cab-over proportions, 6x4 axle arrangement and roof spoiler that defined this heavy road tractor. At 270 mm in length, the finished model has the presence to show off the MAN front end, the side graphics and the extra rear-wheel setup in a display cabinet or on a workshop shelf. This plastic assembly kit is based on the MAN 26.321 fitted with the 6-cylinder Formula 6 diesel engine, a key part of the original vehicle's identity. The strengthened frame reflects the version designed to carry four rear wheels, giving the build its distinctive chassis layout. Clear molded parts are provided for the glazed sections, while separate exterior components shape the mirrors, bumper details and cab trim. The decal sheet extends the finish with MAN and Formel 6 markings, dashboard graphics, registration options from several countries and a LONG VEHICLE panel for added period detail. A stated assembly time of 600 minutes makes this a substantial build centered on fitting, painting and final detailing. The completed truck suits display alongside other 1:24 commercial vehicle models, and the combination of classic MAN styling, multi-axle running gear and road-haulage markings gives the finished build a strong 1980s transport character. Warning! Not suitable for children under 14 years.
Model trucks
MAN TGX XXL D38 E6 Edition Model Kit 1:24
510003916€62.99
The Italeri MAN TGX XXL D38 E6 Edition model kit brings a modern long-haul tractor unit into 1:24 scale with a finished length of 25.7 cm and a cab shape that carries the strong proportions of the full-size truck. Upgraded moulds support crisp definition across the bodywork, helping the grille, roofline and chassis sections read clearly once the build is assembled and painted. This assembly kit focuses on the MAN TGX XXL D38 E6 Edition as a detailed plastic build rather than a quick snap-together project, with a stated assembly time of 600 minutes. The aerodynamic form of the truck is part of the original vehicle design and gives the model its smooth front profile, tall roof section and flowing side surfaces. The XXL cabin is a key visual feature, reflecting the comfort-oriented long-distance layout of the real truck and giving the finished replica a commanding road-haul stance. The included decal sheet adds another layer of finish with MAN logos, model markings, dashboard details, speed signs and multiple registration plate options for a more individual presentation. On the workbench, the kit suits careful painting, decal placement and steady stage-by-stage assembly. Once completed, the blue Arctic livery and graphic side treatment give the tractor unit a striking display presence, whether placed as a standalone cab or alongside other 1:24 commercial vehicle builds. Paints are required separately.
Military aeroplane models
MB-339 60th P.A.N. Anniversary Model Kit
510001461€61.99
The MB-339 60th P.A.N. Anniversary model kit brings the Frecce Tricolori formation into 1:72 scale with 3 aircraft in one commemorative set. Each Aermacchi MB-339 PAN airframe is shaped as a detailed plastic kit, combining the slim tandem-jet profile, underfuselage stores and the distinctive tricolor display livery seen on the Italian aerobatic team. Beyond the core airframes, the set focuses strongly on finishing detail. The decal sheet covers all team planes and carries 6 special color schemes, with long red, white and green striping, aircraft numbers, tail emblems, serial markings and smaller stencil graphics. Several aircraft-specific liveries are represented, including Pony 0, Pony 1 and Pony 6, alongside further team variants shown in the marking guide. Paint references are provided for Gloss White FS 17875, Blue Angels Blue FS 15050, Metal Flat Aluminium FS 37178 and Black FS 37038, helping the final finish stay consistent across the formation. On the workbench, the 3-model format supports a display that can show matching jets in flight formation, or a selection of different anniversary tails side by side. Builders can focus on cockpit detail, fuselage assembly and decal placement, then use the alternative markings to give each aircraft its own identity within the same 60th anniversary theme.
Military aeroplane models
MC.202 Folgore Aces Model Kit 1:72 Aircraft
510001481€19.49
The MC.202 Folgore Aces model kit captures a key fighter from the Italian Regia Aeronautica in 1:72 scale, combining a compact aircraft format with the distinctive lines of the Macchi design. Its subject is the early Folgore, an aerodynamically refined fighter powered by the DB 601 engine built under licence in Italy, a combination that shaped the aircraft's strong wartime reputation. The historical focus goes beyond the airframe alone. This edition is tied to ace versions named in the set designation, connecting the build to individual pilots and service markings rather than presenting a generic aircraft. The Folgore was developed as a major step forward from earlier radial-engine fighters such as the Fiat G-50 and the Macchi Mc-200, and that shift is part of what gives this replica its appeal on the workbench. Early-series armament consisted of 2 Breda-SAFAT 12.7 mm machine guns mounted in the nose, while later wing gun upgrades are part of the wider development story of the type. Once assembled, the finished aircraft suits display alongside other WWII aviation subjects, especially collections centred on Mediterranean and Italian air force themes. The 1:72 format also makes it easy to place in squadron-style arrangements while still preserving the Folgore's fast, slender fighter presence. Figure not included. Age: 14 Years Warning! Not suitable for children under 14 years.
Model car kit
McLaren MP4/2C 1:12 Formula 1 Model Kit
510104711€134.99
The Italeri McLaren MP4/2C in 1:12 scale brings one of Formula 1's defining championship cars into a large-format plastic model kit with the long, low bodywork, open cockpit and winged silhouette that made the 1986 machine instantly recognisable. Based on the MP4/2C raced by Alain Prost and Keke Rosberg, the build captures a car line that earned 3 drivers' championships and 2 constructors' championships. The recommended age marking is 14+. This detailed plastic kit is built around a substantial assembly project with an indicated assembly time of 600 minutes. The subject reflects the TAG Porsche-powered evolution of the MP4/2 line, a design associated with 850 hp and twin superchargers in period. The kit combines moulded parts, rubber tyres, photoetched details and decal options that let the bodywork, cockpit and engine areas carry the visual character of the original race car. Separate front and rear tyre sizes reinforce the authentic Formula 1 proportions, and removable body cowlings make it possible to expose the internal mechanical detail after the build is complete. On a shelf, in a display cabinet or as the centrepiece of a motorsport-themed collection, the finished McLaren MP4/2C has the presence of a classic Grand Prix car rather than a small desktop miniature. Builders can choose between 2 race versions from the 1986 F1 Championship, shaping the final look around Prost car #1 or Rosberg car #2. Paints, tools and glue are required separately.
Military aeroplane models
ME 410 HORNISSE Aircraft Model Kit 1:72
510000074€19.99
The 1:72 ME 410 HORNISSE from Italeri brings the lines of the Messerschmitt heavy fighter into a compact aircraft model kit with a finished length of 17.4 cm. Twin engines, a low-wing layout and the long glazed nose give the Hornisse its distinctive profile, while the 1:72 scale keeps the build manageable on the workbench and easy to place in a display cabinet. The subject is based on the Me 410, developed as an evolution of the Me-210 and used in several operational roles. Source details for the aircraft include two Daimler-Benz DB603 engines rated at 1,750 HP each, heavy forward armament with four 20 mm Mauser cannons and two 7.92 mm machine guns, plus remotely controlled MG 131 guns in side barbettes. The airframe could also carry an offensive payload of over 500 kg in the internal bomb bay or on underwing pylons, and the kit reflects that multi-role character through version-specific parts and alternate external fittings. Decals for 3 versions add further finishing choice across different markings and unit identities. With an assembly time of 600 minutes, the build suits modelmakers aged 14 years and up who want a project with clear stages for construction, painting and final decal work. The completed aircraft sits well in a WWII aviation collection, on a shelf with other 1:72 subjects, or as a standalone display that highlights the Me 410's unusual combination of fighter, attack and bomber features.
Model car kit
Mercedes 450 SLC Rally d Bandama'79 Model Kit
510003632€37.99
The Italeri Mercedes 450 SLC Rally d Bandama'79 model kit brings a classic competition coupe into 1:24 scale with a finished length of 19.8 cm and a body shape drawn from the rally-prepared version of the SLC. Silver bodywork, a black bonnet, chrome trim and the long coupe proportions give the build a strong period look, while the Bandama Rally theme adds the visual character of a late-1970s works-style machine. The full-size 450 SLC was based on the road-going luxury coupe and used a 4520 cm3 V8 engine rated at 225 HP. For rally use, the car kept the core chassis layout but added competition-focused changes such as a roll-bar and lighter aluminium components. That background gives the model a clear identity during the build, especially when the motorsport details, lamp setup and trim pieces come together. The decal options shown for race numbers 4 and 6 add event-specific markings, crew names, flags, registration plates and sponsor graphics that help recreate a named historic entry rather than a generic racer. With an indicated assembly time of 600 minutes, the kit suits a slower, step-by-step approach to painting, fitting and finishing. On the bench, the larger 1:24 format gives space to work cleanly around the grille, bumpers, windows and rally accessories. Once completed, the model carries the stance of a classic endurance rally car, whether placed in a display case or alongside other historic motorsport builds.
Model car kit
Mercedes 500 SLC Model Kit 1:24 Scale Coupe
510003633€36.99
The Italeri Mercedes 500 SLC brings a classic 1970s coupe into 1:24 scale as a detailed assembly kit with crisp body lines, chromed parts and rubber tyres. The long bonnet, pillarless side profile and broad front grille give the finished model the unmistakable stance of the full-size grand touring car, whether it is built as a shelf display or as part of a classic road-car collection. This kit draws on the Mercedes-Benz 500 SLC, a coupe derived from the C107 series and powered in the original car by a 4973 cc engine with 237 HP. That background shapes the model's character: a large 2-door coupe with a strong road presence rather than a stripped competition machine. The exterior details visible in the source design include dual round headlights, a prominent star emblem, black lower body trim, chrome-style wheel covers and bumper-integrated lighting elements. The body finish shown for the model combines a light green main colour with contrasting metallic and dark trim areas, giving painters a clear route to a period-correct look. With a stated assembly time of 600 minutes and a 14 Years age marking, the build suits modellers who want time for careful preparation, painting and final detailing. On a workbench, the separate finishing stages let the chrome, body colour and tyre textures develop their own visual roles. Once completed, the coupe shape and classic Mercedes proportions give the model a composed display presence among road cars from the same era.
Model car kit
Mercedes Benz 300 SL Gull Wing 1:24 Model Kit
510003645€35.99
The Italeri 1:24 Mercedes Benz 300 SL Gull Wing captures one of the most recognisable sports coupes of the 1950s in a buildable scale model with a finished length of 148 mm. Its flowing roofline, low body and distinctive gull-wing door form give the model the same dramatic profile that made the 1954 original stand out on the road and still draws attention in a display setting. The full-size Mercedes-Benz 300 SL combined advanced engineering with striking styling, and this kit reflects that character through separate body, chassis and interior construction. Source details for the original car include a tubular frame, a 2,996 cc front longitudinal engine, 4-speed transmission and rear-wheel drive, all of which shape the identity of the subject being recreated here. Clear parts support the window areas, while the decal sheet adds dashboard instruments, Mercedes Benz scripts, 300 SL markings and multiple period-style plate options. Assembly is required. The stated assembly time is 600 minutes. On the workbench, the model suits careful painting, staged fitting and detail-focused finishing. Once completed, the 1:24 scale makes the coupe easy to place in a cabinet, on a desk or alongside other classic vehicle builds, where the long bonnet, rounded fenders and signature roof-hinged door design remain the centre of attention.
Model trucks
Mercedes Benz Actros MP4 Gigaspace Model Kit
510003905€69.99
The Italeri Mercedes Benz Actros MP4 Gigaspace model kit brings the shape of a modern long-haul tractor unit into 1:24 scale, with a finished length of 25.5 cm that gives the tall cab and road-haul proportions real presence. Built around 100% new moulds, this assembly kit focuses on the distinctive GigaSpace version, the high-roof cabin layout developed for long-distance transport. The cab design reflects the later Actros generation introduced in 2012, with the modern front treatment, large grille area and aerodynamic profile that define this truck family. New wheels and new rubber tyres add updated running gear detail, while the 2 decal versions open different visual directions for the finished build. The marking sheets shown for the kit include Mercedes-Benz stars, Actros scripts, number options, registration plates and country identifiers, giving the builder scope to finish the tractor with a specific road-going character. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a display case or as part of a transport-themed collection, the 1:24 scale format gives the truck enough size for the cab height, wheel layout and chassis proportions to read clearly. The result is a focused truck modelling subject with contemporary European heavy-haul styling and plenty of finishing detail to work through. Warning! Not suitable for children under 14 years.
Diecast model kits
Mercedes W196 Moss #12 Model Car Kit 1:8
520010117€1,049.99
The Mercedes W196 Moss #12 model car kit in 1:8 scale brings a classic open-wheel Grand Prix machine into a large-format build with 451 parts. Silver bodywork, race number 12 markings, exposed suspension areas and the narrow single-seat layout give the finished replica the unmistakable character of a mid-century racing car. The body shows the long, streamlined proportions of the W196, while the open mechanical sections keep key engineering details in view. Wire-spoke wheels, treaded tyres, side air intake openings and the prominent front grille shape the car's competition look. Around the cockpit, the small windscreen, round instrument dials and wood-look steering wheel add a period-correct driving position. The rear section adds further visual depth with visible engine-area detailing and curved side exhaust pipes, while the fuel filler section and body fasteners reinforce the workshop-built feel of the original racer. Assembly is required and the stated assembly time is 2100 minutes. Once completed, the 1:8 format gives these details room to stand out on a shelf, desk or in a display cabinet. The model suits focused building sessions as well as close-up viewing afterward, with the open-wheel layout and metallic finish rewarding attention from the nose to the rear bodywork. Warning! Not suitable for children under 14 years.
Model trucks
Mercedes-Benz 2238 6x4 Model Kit 1:24 Scale
510003943€56.99
The Italeri Mercedes-Benz 2238 6x4 assembly kit brings a classic heavy long-distance tractor unit into 1:24 scale, with the cab-over shape, twin driven rear axles and road-haul proportions that made the original truck a standout in international transport. The build centres on a detailed plastic kit format and uses the Mercedes-Benz 2238 6x4 designation exactly as on the full-size vehicle. The original truck used the OM422 engine with 375 horsepower, and that engineering identity shapes the model's character throughout the build. The 6x4 drivetrain layout gives the finished truck its purposeful stance, while the separate construction of frame, cab and underbody sections lets the mechanical layout emerge step by step. The kit also features 10 tyres, adding the correct wheel equipment for the multi-axle configuration. A new decal sheet expands the finishing stage with dashboard graphics, model badges, European number plates, speed markings and cab striping for different visual versions. Figure not included. With an assembly time of 600 minutes, this model suits a bench session that can move from careful part preparation to painting and final markings at an unhurried pace. Once completed, the Mercedes-Benz 2238 6x4 fits naturally into a commercial vehicle collection, a transport diorama or a display focused on classic European trucks. Paints, glue and tools are required separately.
Model trucks
Mercedes-Benz Actros MP4 BigSpace 1:24 Model Kit
510003968€71.99
The Italeri Mercedes-Benz Actros MP4 BigSpace Grand Prix Edition brings the look of a modern heavy-duty road tractor into a 1:24 scale model kit with a tall cab profile, a 2-axle tractor layout and the distinctive front styling associated with the New Actros generation introduced in 2012. The finished subject reflects the bold cab design and long-distance transport character that made the Actros name a major presence in professional haulage. This kit focuses on the Mercedes-Benz Actros MP4 BigSpace configuration, with visual details that emphasize the high-roof cab, the grille with the large Mercedes-Benz star and the fifth-wheel area behind the cab. Rubber tyres add a more realistic wheel finish than hard moulded alternatives, while chromed adhesive details bring out trim accents across the exterior. The included super decals sheet supports the Grand Prix Edition livery, including the orange striping and graphic elements visible on this version. Together, these features shape a truck model with a contemporary road-going stance and a clean display presence. On the bench, the combination of scale proportions, exterior trim details and livery markings gives the build a clear finishing direction. Once assembled, the model suits shelf display alongside other 1:24 commercial vehicles or as a standalone cab unit that highlights modern European truck design. Recommended age: 14+. Warning! Not suitable for children under 14 years.
Model trucks
Mercedes-Benz SK Eurocab 6x4 Model Kit 1:24
510003924€59.99
The Italeri Mercedes-Benz SK Eurocab 6x4 model kit brings a classic heavy truck into 1:24 scale with a finished length of 270 mm and the tall Eurocab profile introduced on the full-size vehicle in 1993. The raised roof, front spoiler treatment and 6x4 tractor layout give the build the unmistakable look of a long-distance commercial hauler with strong period character. This assembly kit is built around detailed cabin, interior, engine and frame sections, so the structure of the truck remains visible well beyond the outer body panels. The cab shape reflects the Eurocab design with its higher roofline, while the chassis layout supports a more technical build with multiple axles and underframe detail. Rubber tyres add a distinct material contrast against the hard body parts and help the completed truck read convincingly as a working road vehicle. A large decal sheet supplies model-specific markings such as EUROCAB, POWERLINER and 1850 graphics, along with registration and transport details that sharpen the finished appearance. With 600 minutes assembly time, the kit suits a measured build pace focused on painting, alignment and decal placement. Paints are required separately. Once completed, the Mercedes-Benz SK Eurocab 6x4 stands out in a truck lineup, on a display shelf, or as part of a 1:24 commercial vehicle collection where the high-roof cab and red chassis details draw the eye. Warning! Not suitable for children under 14 years.
Model trucks
Mercedes-Benz SK1844 LS V8 Model Kit 1:24
510003956€59.99
The Italeri Mercedes-Benz SK1844 LS V8 brings a late-1980s long-haul tractor unit into 1:24 scale with the square-shouldered cab, prominent front grille and fifth-wheel layout that defined the SK series. As an assembly kit, it focuses on the structure and detailing of the truck itself, giving the build a clear mechanical character from the first chassis stages to the finished cab. The model is designed for ages 14 years and over and has an assembly time of 600 minutes. Inside the kit, the build is divided across multiple sprues and 7 tyres, with separate sections for the frame, wheel assemblies, cab shell, interior and exterior fittings. The cab construction adds clear window parts, grille details, mirrors, wipers and marker-light elements, while the interior uses dedicated dashboard and control details to give the driver area more depth. The included decal sheet expands the finish with 3 versions and a wide selection of markings such as Mercedes-Benz badging, 1844 and 1838 identifiers, country ovals, number plates and decorative striping. On the bench, the long frame rails and running gear create a satisfying heavy-vehicle silhouette early in the build, while the final cab panels and decals shift the focus toward period styling. Once completed, the tractor unit suits shelf display, diorama use or a line-up with other 1:24 commercial vehicle models. Warning! Not suitable for children under 14 years.
Military helicopters
MH-47 E SOA Chinook 1:72 Helicopter Model Kit
510001218€26.99
The Italeri MH-47 E SOA Chinook in 1:72 scale captures the look of a heavily modified special-mission helicopter with its tandem-rotor layout, long fuselage and military transport profile. At 22 cm long, the finished model brings the aircraft's extended-range configuration into a display size that shows the shape clearly on a shelf, in a cabinet or as part of a military aviation lineup. This assembly kit is based on the MH-47 version developed for special missions of the U.S. Armed Forces. The source data describes large tanks originally developed for civilian use, sophisticated night-vision systems, satellite navigational systems and defense armament based on various machine guns. Those features define the aircraft's role and give the build its distinctive character compared with a standard transport helicopter. A decal set for one version is included, supporting a specific finished scheme for the completed model. The 1:72 scale suits builders who enjoy aircraft subjects with visible detail in a manageable format, and the 600-minute assembly time points to a project with room for steady, stage-by-stage progress. Once completed, the 22 cm helicopter fits naturally into military aircraft displays, desk presentation or diorama scenes centered on special operations aviation.
Model paints
Mil MI-24P Mil MI-35P model kit 1:72 scale
510001432€16.99
The Italeri Mil MI-24P / Mil MI-35P brings one of the most recognizable attack helicopter silhouettes into a 1:72 scale model kit. Its subject combines the broad, armored fuselage form of the Mi-24 family with the specific identity of the Mi-24P, creating a build that stands out through its purposeful lines and military profile. The real aircraft entered Soviet service in the early 1970s and went on to serve across numerous operational theaters with Eastern Bloc forces. This background gives the finished helicopter a clear historical setting rather than a generic military look. The Mi-24P version represented a notable step in the series, using a fixed twin-barrel 30 mm cannon mounted on the starboard side of the fuselage. The kit also references the later Mi-35P, the most recent variant in production since 2020, linking the build to both the classic and current stages of the aircraft's development. Over time, the full-size helicopter family saw continuous upgrades to weapon systems and onboard avionics, which adds further depth to the subject choice. On the bench, the 1:72 scale format keeps the project manageable while still giving space for the aircraft's distinctive proportions to come through. Once assembled, the model suits shelf display, military aircraft collections, or diorama scenes centered on rotary-wing aviation. Age marking: 14 Years.
Military aeroplane models
Mirage 2000C Aircraft Model Kit 1:72 Scale
510001381€16.49
The Italeri Mirage 2000C brings the lines of the French single-seat air superiority fighter into a 1:72 scale aircraft model kit with a finished length of 19.9 cm. Its delta wing layout gives the completed build the unmistakable profile that made the Mirage 2000 family a reference point in French aircraft production. This assembly kit is built as a hands-on modelling project, with a stated assembly time of 600 minutes. The subject reflects an aircraft that entered service in the early 1980s and combined the familiar delta-wing configuration with major technical updates over earlier French fighters. In service form, the Mirage 2000C used a SNECMA afterburning turbofan engine and reached Mach 2.2, details that give the finished model a strong connection to the real aircraft's role and performance. Decals for 3 versions open up different marking paths, including French and UAE aircraft schemes shown in the reference material. On the bench, the kit suits careful painting, decal placement and final detailing around the airframe and stores. Once completed, the 1:72 format sits neatly in a modern jet collection, whether displayed as a standalone aircraft or placed into a Gulf War era aviation lineup.
Military aeroplane models
Mirage III E Aircraft Model Kit 1:48 Scale
510002816€35.99
The Italeri Mirage III E brings one of the best-known French jet aircraft of the Cold War to 1:48 scale as a detailed assembly kit. Its delta-wing layout and lengthened fuselage define the look of the Mirage III E, a version developed from the Mirage IIIC to carry improved avionics while taking on multirole and ground-attack duties. The finished model captures the sharp nose, side intakes and clean wing planform that made the aircraft instantly recognizable in service. The subject itself adds strong historical character to the build. Produced from the early 1960s for the Armee de l'Air, the Mirage III family also became a major export success and appeared in conflicts through the 1970s and 1980s. The real aircraft used a Snecma Atar engine with afterburner and was capable of exceeding Mach 2, a performance background that gives the model its purposeful proportions. The kit also supports a more tailored finish through version-specific markings, and the instruction material indicates nose weight in the forward assembly to help the completed aircraft sit correctly on its landing gear. On the workbench, the project suits builders who enjoy careful painting and finishing as much as assembly. The decal and paint guides map markings across the fuselage, wings and underside, while the optional open canopy layout creates a more detailed parked-aircraft display. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately. Warning! Not suitable for children under 14 years.
Military figures & accessories
Montecassino'44 GUSTAV Line Battle Set 1:72
510006198€92.99
Montecassino'44 GUSTAV Line Battle Set 1:72 brings one of the defining clashes of the Italian campaign into a detailed assembly kit built around terrain, armour and infantry. At the centre stands Montecassino Abbey in laser-cut MDF, rising above the battlefield as the visual anchor for a scene shaped by the fighting along the Gustav Line in 1944. The abbey is designed as a wreckable structure and can be built in an intact layout or a wrecked layout, giving the scene two distinct historical states. Alongside the building, the set contains 50 Polish infantry figures, 32 German Paratroopers, an M4A2 Sherman III and a Sturmgeschütz III, all scaled to work together in a coherent 1:72 composition. This mix supports careful unit placement across roads, slopes and defensive positions, while the contrast between standing walls and battle damage adds depth to the finished display. Assembly is required, with a stated build time of 600 minutes. Paints, glue and tools are required separately. On a tabletop, the set supports staged battle recreations with the abbey overlooking advancing infantry and armoured vehicles moving through contested ground. On a shelf or in a diorama, the same components create a compact historical scene that captures the pressure, terrain and fortified character of Montecassino in 1944.
NiMH batteries
My First Magic Machine Battery, 4.8V RC pack
500608219€15.49
The My First Magic Machine battery brings the stated 4.8 V NiMH setup and 600 mAh capacity into one dedicated power pack for compatible Carson RC models. Built with a JST plug, it connects through the specified connector format for the My First Magic Machine reference 500404201/02, making it a focused replacement or spare for the named vehicle platform. As a rechargeable NiMH battery pack, it is configured for repeated use in RC driving rather than as a loose-cell solution. The 4.8 V rating defines the voltage level for the intended model, while the 600 mAh capacity identifies the pack specification clearly when selecting a matching battery for maintenance, continued running, or a second charged pack between sessions. The attached lead and plug arrangement keep the connection format integrated into the pack itself. This makes the battery straightforward to identify within an RC parts box where voltage, capacity, chemistry, and connector type all matter. Whether kept as the main running pack or stored as a backup for the next outing, this battery serves as a model-specific power source for the My First Magic Machine range. For hobby benches, charging routines, and replacement planning, the clearly stated NiMH, 4.8 V, 600 mAh, and JST details give the essential matching points at a glance.
Model figures
Napoleon Imperial General Staff Model Kit 1:72
510006016€10.99
Napoleon Imperial General Staff brings the High Command of Napoleon's Grande Armée into 1:72 scale as a detailed plastic model kit. The set focuses on the command group behind the Corps system and places the Emperor at the centre of a mounted historical scene, supported by officers, escorts and attendants that give a diorama a clear chain of command and a strong period character. The composition goes beyond a single mounted figure by combining 13 riders with 8 additional figures, allowing broader scene planning across staff briefings, field observation points and escort formations. Marshal Berthier appears alongside aides-de-camp, while the Chasseurs a Cheval of the Imperial Guard and the Mameluks introduce contrasting uniforms and silhouettes across the assembled group. The unassembled parts arrive as an assembly kit, and the stated assembly time of 600 minutes points to a project with room for careful painting, finishing and placement. At 1:72 scale, the set fits naturally into historical military layouts centred on the Napoleonic era and the Waterloo setting shown in the range. On a display base, the mix of mounted officers and standing figures can shape a command post, a planning halt or a formal field inspection. The same figure group also suits collectors and model makers building larger campaign scenes where leadership, escort detail and period dress matter as much as troop movement.
Military aeroplane models
Northrop F-5E Tiger II Aircraft Model Kit 1:48
510002827€31.49
The Italeri Northrop F-5E Tiger II brings a well-known Cold War fighter into 1:48 scale with a detailed assembly kit shaped around the later Tiger II airframe. Its longer, enlarged fuselage and twin J85-GE-21 engine layout give the model the lean proportions that made this aircraft distinct, while the finished silhouette reads clearly on a shelf, in a cabinet or as part of a wider military aviation line-up. The subject itself was developed from the Northrop F-5 family for operators that needed a multi-role fighter with straightforward service use, and this kit reflects that mix of speed, compact size and weapons capability. The aircraft configuration combines 2 nose-mounted 20 mm cannons with air-to-air missile carriage and ground-attack potential, which gives the build real substance beyond the basic airframe. Version choices extend that interest further, with 4 marking options covering USAF, Brazilian Air Force and IRIAF schemes. Paint and marking references shown for the versions add another layer of finishing accuracy through serials, insignia and camouflage layouts. A 600-minute assembly time makes this a substantial bench project rather than a quick build. The included assembly kit suits careful work across cockpit details, canopy positioning, pylons, missiles and tank installation, then moves naturally into painting and decal application for a display piece with a strong aviation profile. Age marking: 14 years and over.
Military helicopters
OH-13 Scout Helicopter Korea War Model Kit
510002820€24.99
The Italeri OH-13 Scout Helicopter Korea War model kit recreates one of aviation history's most recognizable light helicopters in 1:48 scale. Its defining Bell H-13 silhouette comes through in the clear bubble canopy, the open tail structure and the side-mounted tanks, giving the finished helicopter the lean, unmistakable profile seen in period service. The full-size OH-13 served the U.S. Army from the late 1940s and appeared in large numbers during the Korean War, where it was used for observation, advanced reconnaissance and medical evacuation. That operational background gives the build a clear historical setting beyond the airframe itself. The real helicopter had a 3-seat cabin configuration and could reach a top speed of 170 km/h, details that help place this compact rotary-wing design within early post-war aviation development. The kit is supplied as an assembly model and uses molded parts plus a dedicated decal sheet to support accurate finishing work. On the bench, the subject suits builders who enjoy aircraft with exposed structures and visible cockpit glazing, where painting and decal placement shape much of the final character. Once completed, the 1:48 format sits well in military aviation displays and alongside other Korean War era aircraft. Assembly is required and the stated assembly time is 600 minutes.
Model trucks
Opel Blitz Fire Truck Model Kit 1:24 Scale
510003966€45.99
The Italeri Opel Blitz Fire Truck model kit brings a historic utility vehicle into 1:24 scale with the distinctive shape of the Opel Blitz and the specialist fittings of a period fire brigade truck. The rounded cab, black fenders and rear equipment layout give the finished build the look of a working emergency vehicle from Germany's post-war reconstruction era. This detailed assembly kit centres on the structure and equipment that define the fire-fighting version. A cylindrical tank body sits behind the cab, while the rear section carries pump details, gauges and valves that reflect the truck's service role. Side-mounted lines and equipment areas add further mechanical character, and the roof-mounted ladders extend the silhouette with a recognisable rescue vehicle profile. Rubber tyres complete the wheel setup with a more realistic finish than hard moulded alternatives, helping the completed model sit naturally in display scenes. The build is designed as a substantial project, with 600 minutes of assembly time. On a workbench, the separate fire brigade fittings create a build with plenty of visual variety across the chassis, body and rear service section. Once completed, the model suits display alongside other historic commercial vehicles, emergency service subjects or mid-20th-century transport themes. Warning! Not suitable for children under 14 years.
Military aeroplane models
P-47D Thunderbolt E.T.O. Aircraft Model Kit 1:48
510002835€34.99
The Italeri P-47D Thunderbolt E.T.O. brings a major World War II fighter-bomber into 1:48 scale as a detailed plastic kit with the broad fuselage, low-wing layout and distinctive radial-engine nose of the original aircraft. Assembly is required, and the stated assembly time is 600 minutes, giving the build enough scope for careful painting, decal placement and finishing work across the airframe. The full-size Republic P-47D was powered by a Pratt & Whitney R-2800 radial engine with more than 2,000 HP, a configuration that made the aircraft notable for high-altitude speed and operational flexibility from 1943 onward. In service, the type flew both bomber escort and ground-attack missions, and that dual-role background gives the model its strong military character. The kit also reflects the aircraft's heavy combat fit, with the P-47 armed with eight 12.7 mm Browning M2 machine guns and able to carry bombs and rockets. A super decals sheet for 4 versions expands the finishing possibilities with different wartime liveries and identification markings. On the bench, the 1:48 scale gives enough room to bring out panel lines, canopy framing and the shape of the engine cowling while keeping the finished aircraft display-friendly. The subject suits builders who enjoy historic aviation, military markings and the look of a rugged single-engine warbird with a strong presence once completed. Warning! Not suitable for children under 14 years.
Military figures & accessories
PaK 97/38 AT Gun 1:35 Kit with Crew Figures
510096460€19.99
The Italeri PaK 97/38 AT Gun with crew brings a World War II anti-tank subject into 1:35 scale with a detailed plastic kit that combines the gun and figures in one build. The finished scene captures a field artillery position with more presence than a standalone weapon, making it well suited to military displays with a clear operational setting. The PaK 97/38 was developed by adapting the barrel of the French 75 mm Mle 1897 gun, a detail that gives this subject a distinctive place in wartime equipment history. In service, it answered the need for a more powerful anti-tank weapon than the 37 mm PaK 36 and was used against more heavily armoured Soviet tanks such as the KV-1 and T-34. That background gives the completed model a specific historical role rather than a generic artillery look. The plastic format supports crisp scale detailing across the gun and crew, while the 1:35 format fits naturally into established military diorama layouts. On a shelf, in a diorama, or as part of a wider World War II collection, the combination of artillery piece and figures creates a scene with immediate context. Builders can place the completed PaK 97/38 as a defensive gun position, a battlefield vignette, or a companion piece alongside other 1:35 military vehicles and troops.
Model tanks
Panzerjager I 1:35 scale model kit with figure
510006577€31.99
Panzerjager I in 1:35 scale brings one of the earliest German tank destroyers into a detailed model kit with a finished length of 12.6 cm. The design is based on the Panzer I chassis and pairs that compact hull with a 47 mm anti-tank gun mounted behind an open steel shield, creating a distinctive profile on the workbench and in the display case. The kit is built around historically specific features that define the vehicle's character. The Panzer I hull gave the original machine good mobility, and that layout translates here into a tracked build with visible running gear, road wheels and a tall fighting compartment. Glueable rubber tracks shape the lower section with a more natural look, while the photo-etched fret adds finer detail where thinner metal parts matter most. Decals cover 4 versions, opening different marking and theatre options drawn from wartime service in France, North Africa and the 1941 Barbarossa campaign. One figure is included to add scale presence beside the vehicle. This Italeri model kit suits builders who enjoy military subjects with strong historical identity and varied finishing possibilities. The combination of compact dimensions, open-top gun platform and alternate markings gives the completed Panzerjager I a focused display presence, whether placed as a standalone build or worked into a small battlefield scene.
Model tanks
Partisans 1:35 Figure Set from ESCI Original Moulds
510006556€12.49
Partisans in 1:35 scale bring a focused resistance group into WW2 dioramas, with 6 figures drawn from ESCI Original Moulds and supplied as a detailed plastic kit. The mix of civilian and military-style clothing, weapons and field gear gives the set a distinct irregular-war look that stands apart from standard uniformed troop formations. The subject reflects the local partisan groups active in occupied European countries during WW2. Their operations ranged from intelligence gathering to support for Allied forces, with sabotage aimed at logistics and communications infrastructure. That background gives the figures a clear role in scene building: they fit naturally beside rail lines, roadside checkpoints, ruined streets, supply routes or hidden rural positions. The varied poses support different placements across a base, from observation and cover to movement and attack, while the 1:35 scale keeps the group compatible with a wide range of military vehicles and scenery. A stated assembly time of 600 minutes points to a build that rewards steady bench work, especially when painting facial details, clothing contrast and weathered equipment. The 14 Years marking suits the hobby focus of the set, whether the finished figures are placed in a display case, worked into a larger battlefield layout or used to add narrative tension to a single historical vignette.
Military figures & accessories
Pegasus Bridge 1:72 Battle Set Model Kit
510006194€79.99
Pegasus Bridge 1:72 Battle Set Model Kit brings the D-Day airborne assault into a single large-scale diorama project built around an MDF laser cut bridge. The scene draws on the night action of 5 to 6 June 1944, when the crossing over the Orne River near Ouistreham became a decisive objective in Operation Overlord. The set combines British paratroopers, German infantry, 3 German guns, an Opel Blitz and a Kdf.1 Kubelwagen to create a layered battlefield with troops, transport and artillery in one composition. The bridge acts as the visual centrepiece, with its raised structure, railings and control section giving the layout a strong architectural focus. Battlefield accessories add further terrain detail for road approaches, defensive positions and staging around the crossing. With 50 figures in the set, formations can be arranged across the bridge deck, beside the river approach or around the gun positions to build a scene with clear movement and opposing lines. The 600 minute assembly time marks this as a substantial modelling project rather than a quick build. Painting and finishing can be directed toward uniforms, vehicles, artillery and bridge surfaces to give each section of the diorama its own character. Once completed, the 1:72 scale layout suits shelf display, historical scene building and tabletop setups centred on one of the most recognised bridge assaults of the Normandy campaign.
Diecast model kits
Porsche 911 RS 2.7 Model Car 1:8 White Green
520010116€1,049.99
The iXO Premium Collectables Porsche 911 RS 2.7 in 1:8 scale brings the shape of this classic sports car into a large-format model with white bodywork, green accents and functional opening sections. The side doors, front hood and rear engine lid open to expose the black interior, front storage compartment and rear-mounted engine area, giving the finished car more to explore from every angle. Its 713-part format supports a build centered on recognizable Porsche details rather than a simplified silhouette. Round headlights, black window trim, side mirrors, chrome-look door handle details and the raised rear spoiler all contribute to the distinct RS profile. Green wheels and Carrera graphics sharpen the period racing look, while the rear panel lettering and front plate graphics add model-specific identity. The vented engine cover and visible rear section extend the display value beyond the outer body, and the dark cabin with steering wheel detail adds depth through the glazing. With a stated assembly time of 2100 minutes, this model suits a slower, more deliberate build rhythm that gives each stage room to take shape. Once assembled, the 1:8 format makes it well suited to shelf display, desk placement or a collector setup where the opening panels and contrasting white and green finish can be shown from multiple viewpoints. Warning! Not suitable for children under 14 years.
Model car kit
Porsche 911 Turbo model set 1:24 with tools
510072013€46.99
The Italeri Porsche 911 Turbo model set in 1:24 brings the shape of the 993 generation into a hands-on build with the low, rounded body, clear light parts and the familiar rear-engined sports car silhouette taking form piece by piece. The set combines the plastic kit with the core finishing materials needed to start work straight away, making it a focused entry point into scale car building. Separate sprues carry body panels, chassis sections, interior parts and trim elements that let the build move through distinct stages of preparation, painting and final assembly. The interior includes seats, a steering wheel and dashboard details that give the cabin more depth once the body is in place. Chromed wheel parts and rubber tires sharpen the finished road-car look, while the decal sheet adds Porsche crests, instrument graphics, turbo markings and multiple regional number plate options. The clear shell parts and smaller transparent components help define the lights and glazing with crisp contrast against the painted body. On a worktable, the included sprue cutter, precision tweezer and double sided sandpaper support the practical steps of trimming, handling and refining small parts. The 3 x 7 ml acrylic paints, brush and plastic glue complete a set that suits a first car build as well as a compact weekend modeling session centered on an iconic Porsche form. Warning! Not suitable for children under 14 years.
Diecast model kits
Porsche 917KH #23 Salzbourg 1:8 Model Car
520010119€1,049.99
The Porsche 917KH #23 Salzbourg in 1:8 scale brings the shape of a classic endurance racer into a large-format model car with a striking red and white racing finish. Its low nose, enclosed cockpit and stretched rear bodywork capture the visual balance that made this competition machine so distinctive on long-distance circuits. The build is formed from 839 parts, giving space for the body contours, wheel areas and rear structure to emerge step by step across the stated 2100-minute assembly time. Covered headlight sections, a roof air intake, side mirrors and a windshield wiper add further period-specific detail beyond the main silhouette. Sponsor graphics including Shell, Goodyear, BOSCH, MICHELIN, BORG&BECK and MARCHAL sit alongside the large number 23 markings, creating a livery that reads clearly from nose to tail. At the rear, twin exhaust pipes, rear light units and wing elements reinforce the car's long-tail racing character. Placed on a shelf, desk or in a display cabinet, the 1:8 format gives the lines and graphics enough presence to read from across the room. During assembly, the large scale also makes the changing shape of the cockpit canopy, rear deck and wheel stance especially satisfying to follow as the model car comes together. Warning! Not suitable for children under 14 years.
Model car kit
Porsche 935 Baby model kit 1:24 scale car
510003639€37.99
The Italeri Porsche 935 Baby brings a compact Group 5 racing icon into a detailed 1:24 scale model kit with a finished length of 19.6 cm. Wide fenders, deep air intakes, the raised rear wing and the low racing coupe shape give the build the unmistakable stance of the 935J as it appeared in late-1970s circuit competition. This assembly kit is based on the Porsche 935J 'Baby', a special version developed for the 2.0-liter German national championship. The original car used a 1.425 air-cooled engine with 261 kW, and that competition background gives the model a clear technical identity beyond its body shape alone. The super decals sheet carries the Martini Porsche livery plus race numbers and sponsor markings, so the finished car can be brought to life with the layered striping and small placement details seen on the full-size racer. Assembly is required, and the stated build time is 600 minutes. On the workbench, the kit suits a measured build with time for painting, decal application and careful finishing of the racing bodywork. Once completed, the 1:24 Porsche 935 Baby has the visual character of a Hockenheim-era circuit car, with the compact proportions and bold graphics that made the original such a memorable Porsche competition machine.
Basic accessories
Pylon-Set, model accessory, 10 cones 56 mm
500907197€9.29
This Pylon-Set brings 10 compact 56 mm markers into RC courses and model scenes with a clean, purposeful trackside look. The orange cones create clearly defined reference points for corners, lane limits and temporary route changes, while the included curved decal strips add band detailing that gives each marker a more finished appearance. Used around pit lanes, slalom sections or small practice layouts, the set helps structure driving lines without dominating the scene. The 56 mm format suits tighter spaces where larger markers would look out of scale or reduce usable room on the course. The separate decals also allow each cone to be finished with matching visual accents, which supports a more consistent layout across multiple marker points. As a model accessory, the set fits naturally into racing environments, workshop dioramas and technical display setups. On a home RC track, the cones can define braking zones, apexes or turnaround points for repeatable driving sessions. In a display scene, they add the familiar visual language of paddocks, service areas and temporary barriers with a simple set of 10 matching markers. Warning! Not suitable for children under 14 years.
Military figures & accessories
Pz.Kpfw. V Panther Ausf. A 1:72 Model Kit
510007018€15.99
The Italeri Pz.Kpfw. V Panther Ausf. A in 1:72 scale brings one of the most recognisable WWII tank designs into a compact model format with a strong historical identity. The finished subject combines the Panther's angled front armour, turret silhouette and long-barrelled main gun in a size that suits shelf display, collection cabinets and tabletop military layouts. This detailed plastic kit is built from multiple sprues that cover the hull, turret, road wheels, drive sprockets and exterior fittings. The turret assembly uses separate parts for the gun barrel, mantlet and roof details, while the hull construction adds deck features, side components and smaller mounted elements for a more layered finish. The instructions also show optional Zimmerit surface texturing for builders who want to recreate anti-magnetic coating effects on the vertical and sloped armour plates. Historical finishing is a major part of the build, with 5 marking versions and camouflage references spanning April 1944 to April 1945. During the build, the compact 1:72 format still leaves room for distinct details such as the running gear, side skirts and turret fittings, making painting and weathering especially rewarding. The included figure can be placed with the completed tank to strengthen scale presence in a display or diorama scene. Assembly kit contents are included, while cement, paints and tools are required separately. Warning! Not suitable for children under 14 years.
Model tanks
Pz.Kpfw. VI Ausf. E Late Production Model Kit
510006754€30.99
The Italeri Pz.Kpfw. VI Ausf. E late production brings one of the most recognized heavy tanks of World War II into a 1:35 assembly kit with a strong focus on scale presence and finishing choice. Hull, turret and running gear come together as a detailed build that captures the late-production form of the Tiger I, creating a model that stands out on a shelf or in a diorama setting. The subject itself adds depth to the build. The Panzerkampfwagen VI Ausf. Tiger I was developed as a heavily armored and heavily armed tank, and this kit centers that distinctive configuration in model form. Its historical vehicle profile is defined by the long-barreled 88 mm KwK 36 L/56 gun mounted in the turret and by the heavy shielding associated with the design. Italeri also equips the kit with 2 track approaches, so the running gear can be completed with link and length tracks or with gluable rubber tracks. The included decal sheet covers 4 versions, opening different marking options during the painting and finishing stages. Assembly is required, and the stated build time is 600 minutes. On the workbench, the kit supports a measured sequence of cutting, fitting, gluing and painting that suits builders aged 14+. Once completed, the 1:35 scale tank fits naturally into military model displays, historical collections or urban battlefield dioramas where camouflage, markings and track treatment can shape the final look. Warning! Not suitable for children under 14 years.
Model tanks
Pz.Kpfw.VI Tiger I Ausf. E Model Kit 1:72
510107505€18.99
The Italeri Pz.Kpfw.VI Tiger I Ausf. E model kit brings one of the most recognisable armoured vehicles of World War II into a compact 1:72 scale format, with 2 fast assembly models in one set. Each finished tank measures about 12 cm and captures the low hull, turret and long gun profile that made the Tiger I such a distinctive battlefield design. This assembly kit is arranged as a focused build rather than a high part-count project, with 10 parts for each tank. The layout shown for the build includes the lower hull tub, upper hull deck, turret, gun barrel, rear plate, exhaust assembly and the left and right track runs, so the structure comes together in clear stages. A new decals sheet is included, and decals for 2 versions allow different markings and unit numbers across the pair. The leaflet also shows 2 historical finishing options: schwere Panzerabteilung 505 on the eastern front in 1944 and schwere Panzerabteilung 504 in Italy in early 1945. On a wargaming table, in a military diorama or on a shelf with other 1:72 vehicles, the matched pair creates a coherent scene with room for different camouflage and marking choices. Assembly is required, and the stated build time is 600 minutes.
Model tanks
PzKpfw. III Ausf. J Fast Ass. Kit 1:72 Model
510107507€16.99
The PzKpfw. III Ausf. J Fast Ass. Kit from Italeri brings a compact 1:72 military build to the workbench with 2 matching tank models, each measuring 7.7 cm. The fast assembly format keeps the focus on the vehicle's recognisable hull, turret, barrel, and tracked running gear while still delivering a detailed scale result suited to display and wargame use. This assembly kit is designed for builders aged 14 years and up and has a stated assembly time of 600 minutes. The Panzer III subject adds historical depth, with the kit drawing on the Ausf. J version of the tank developed as part of Germany's mid-1930s armoured vehicle programme. Decals are provided for 2 finishing versions, and the instruction material shows marking options for German Army vehicles in North Africa 1942-1943 and on the Eastern Front 1942-1943. The kit artwork also indicates early and late configuration choices, adding another layer of variation to the finished models. On a shelf, in a diorama, or across a tabletop battlefield, the pair format gives scenes immediate structure because 2 vehicles of the same type can be finished in different schemes or positioned together. Paints are required separately.
Remote-controlled systems
RA 3Ch Reflex Stick Pro 4, remote control, 2.4GHz
500500527€49.99
The RA 3Ch Reflex Stick Pro 4 brings 2.4GHz radio control together with a classic stick layout for model driving that calls for direct, proportional input. With 3 channels and 2 continuously adjustable, fully proportional control paths, steering and throttle commands can be metered with fine control, while channel 3 is switched in 2 positions for a clear auxiliary function. Channel 1 includes dual rate to adjust servo travel, which helps match the steering response to different model setups. Servo reverse changes the direction of movement for the channels when the installation requires it, and the trim function for channels 1-2 supports accurate neutral settings. The transmitter operates at 4.8-6 V with 4 AA cells, and the receiver power supply allows up to 11 V without BEC. The connector system uses Futaba/Graupner J/R, giving the set a clear interface for compatible RC components. The set includes the 3-channel remote control, a 4-channel receiver and a manual. An LED battery status indicator keeps the transmitter charge level in view during running sessions, while the failsafe system provides a defined response if the radio link is lost. Age 14 Years+ Warning! Not suitable for children under 14 years.
Remote-controlled systems
RA 4Ch Reflex Stick Pro 4, remote control, 2.4GHz
500500528€64.99
The RA 4Ch Reflex Stick Pro 4 2.4GHz LCD brings 4-channel control and detailed setup functions into one radio system for model driving from age 14 years. Its LCD layout supports direct access to key settings, while 15 model memory slots keep multiple vehicle configurations stored and ready for use. Two fully proportional channels allow continuously adjustable steering and throttle input, and 2 additional switch channels handle special functions on compatible models. Channels 1 and 2 can be tuned with servo reverse, trim, dual rate, EPA and EXP, giving clear control over direction, centre position, servo travel limits and response curve. The integrated failsafe system adds a concrete control safeguard for supported setups. The transmitter operates at 4.8 to 6 V with 4 AA cells, and the connector system uses Graupner J/R. A 4-channel receiver is included, so the system can move straight into installation on a suitable model. The receiver power supply supports up to 11 V without BEC, which suits a wide range of hobby configurations. This combination fits model-building enthusiasts who want one radio system for several vehicles, special functions and fine setup work at the bench or track. Warning! Not suitable for children under 14 years.
Catalogues & merchandise
RC Catalogue 2026/27 Models Supplies
500990214€5.49
This printed RC catalogue gathers the Carson Modelsport 2026/27 range into a bilingual German and English reference format for model and accessory browsing. As a physical catalogue rather than a vehicle or spare part, it serves as an overview source for checking lines, categories and range structure in one place. The product data identifies the catalogue within Models & Accessories and Models Supplies, which frames it as reference material for the hobby rather than as running gear or workshop equipment. The 2026/27 designation gives it a clear edition context, while the GER/EN format supports reading across 2 languages without switching between separate versions. Because the data does not list page count, dimensions or included extras, the copy stays with the confirmed facts: printed catalogue, bilingual content and range-reference function. It fits naturally into bench-side planning, desk browsing or quick range checks when comparing model families and accessory groups. In hobby spaces where a screen is not the first choice, the catalogue provides an offline source for orientation within the Carson Modelsport assortment.
RC remote controls
RC-Reflex Pro 3 Electric Set, RC radio system
500707152€124.99
The RC-Reflex Pro 3 Electric Set brings the core electronics for an RC ground model into one coordinated package. A 2-channel 2.4 GHz transmitter works with a 4-channel mini receiver to handle steering and throttle commands, while the pistol-grip layout supports one-handed control with a trigger and side wheel format familiar in car-based RC setups. Alongside the radio link, the set includes a CS-6 steering servo for installation in a compatible model and a 7.2 V 3000 mAh drive battery for the vehicle itself. The Expert Charger is part of the set, and 4 AA transmitter batteries are also included for the handset. This combination suits fresh builds, replacement electronics, or an upgrade from older radio gear where the main control components need to be assembled in one step. With 2 frequency channels and 16 listed parts, the set covers the central functions needed to equip a model for radio-controlled driving. In use, the electronics set fits naturally into workshop preparation before a chassis goes to the track, car park or garden path. The included components support installation, charging and control in a format aimed at hobby-focused RC driving, whether for a first compatible setup or as a practical replacement package for an existing model. Warning! Not suitable for children under 14 years.
- 18 %
RC remote controls
REFLEX STICK PRO 3.1, radio set, 2.4GHz
500707132€84.99
The REFLEX STICK PRO 3.1 Elektro Set brings the core electronics for an RC model into one coordinated package, centred on a 2-channel 2.4GHz radio system with fully proportional control. Steering and throttle inputs respond progressively rather than in fixed steps, which supports cleaner line control on the track, at the workbench, or during first setup runs. The transmitter operates on 4.8-6V and uses a stick layout familiar across many hobby-grade applications. Beyond the radio itself, the set combines a 2.4G receiver, a CS3 servo, a 7.2V 2500mAh racing pack, a USB charger with 7.2V 250mAh output, and 4 AA Ansmann batteries. Servo reverse is available on both channels, so steering or throttle direction can be corrected directly at the transmitter when the installed linkage runs opposite to the intended movement. The steering and throttle trim functions help dial in neutral position and straight tracking, while dual rate on the steering channel allows reduced or expanded steering travel depending on the model's response. A charging socket with positive pole inside and an LED battery charge status indicator add clear handling details during use. The plug system is compatible with Futaba and Graupner JR, which broadens integration across common RC installations. In a touring car, buggy, boat, or similar hobby build, the set covers the key radio and power components needed to move from installation to controlled running with matched electronics. Warning! Not suitable for children under 14 years.
RC receivers and accessories
Reflex Stick Pro 4 WP Receiver, RC receiver
500501552€51.99
Functional RC models often depend on more than steering and throttle alone, and this 15-channel receiver is built for that broader control layout. Operating in the 2.4 GHz frequency range, the Reflex Stick Pro 4 WP receiver is designed as a replacement unit for compatible Carson radio systems while keeping the electronics package compact at 52 x 32 x 13 mm. The 15 available channels create room for models that use several separately controlled functions, such as truck equipment or specialty vehicle features that need their own signal paths. Its 15 g weight helps when chassis space is already shared with servos, linkages and wiring, because the receiver can be integrated without taking over the layout. The compact format also suits installations where bodywork, interior parts or scale details leave little free room around the radio compartment. Compatibility is stated for the Carson FS 14K Reflex Stick Pro 4, FS 14K Reflex Stick Pro 4 LCD and FS 15K Reflex Stick 4 Pro LCD-MFC 2.4 GHz remote controls. In workshop use, it fits as a direct replacement when an existing radio setup needs the same control architecture again. In running sessions with function-heavy RC trucks or specialist builds, the 2.4 GHz system supports stable command transfer across the model's multiple control tasks.
RC remote controls
REFLEX XS 2.4GHz Transmitter, RC controller
500500117€25.99
The REFLEX XS 2.4GHz transmitter brings classic wheel-style RC control to compatible XS-Chassis models with a compact pistol-grip format, a side steering wheel and a trigger for throttle and brake input. The black and dark grey housing keeps the layout focused, while the 2.4GHz system suits interference-conscious driving sessions where clean radio control matters. Its control concept follows the familiar car transmitter arrangement: the foam-covered wheel handles steering input, and the trigger manages acceleration and braking through one hand position. Visible setup markings such as REV, ST, TH and D/R point to onboard adjustment functions that support model-specific tuning rather than a fixed one-setting layout. The top section also carries additional adjustment points, giving hobby users direct access to setup changes on the transmitter body. This transmitter is intended for CARSON XS-Chassis references 500404360, 500404361, 500404362, 500404363, 500404252, 500404253, 500404254 and 500404255. The 14 Years age marking is stated in the product data. In the workshop, at the track or on a casual driving surface, the wheel-and-trigger format keeps steering and speed control close together for responsive handling on compatible RC vehicles.
Electronics
Reflex2 14Ch Gear Shift Gate Spare Part
500907167€5.79
The Reflex2 14Ch VA gear shift gate is a dedicated spare part for the matching Carson transmitter system, built around a stamped metal plate with a precise selector profile. Its flat circular form, silver finish, rounded inner cutout and 4 evenly spaced outer notches define how the part sits and works inside the control mechanism. That geometry matters in use: the shaped central opening guides the movement path, while the outer notches provide the locating points needed for correct alignment in the intended assembly. Instead of a generic hardware piece, this is a model-specific replacement component designed for the Reflex2 14Ch VA layout. The metal construction gives the part a crisp technical character and makes it suitable for maintenance work where the original selector plate needs to be replaced. In a workshop setup or at the bench between driving sessions, this spare part supports the upkeep of compatible radio equipment with a component matched to the named system. The 14 Years age marking places it within the hobby-focused Carson Modelsport range, where accurate replacement parts help keep existing control hardware in service.
Electronics
Reflex2 6Ch Gear Shift Gate RC Accessory
500907165€5.79
The Reflex2 6Ch. VA gear shift gate adds a dedicated control insert to a compatible Carson radio setup, bringing a more defined shifting layout to the transmitter area. Its precision-cut form, visible in the shaped centre opening and 4 outer notches, gives this small metal component a clear mechanical role within the control assembly. As an accessory for the Reflex2 6Ch. VA, the gate focuses on the handling point where shift inputs are guided. The silver-coloured metal part has a flat circular format that suits compact installation and storage among workshop spares. The shaped inner opening is not decorative; it creates the path that guides lever movement across the gate. That makes the component relevant for hobby users who value a more structured control feel on compatible RC driving setups. 14 years and up is the stated age marking. On the bench, the part fits naturally into a transmitter maintenance or upgrade routine. During RC sessions, the defined slot pattern supports deliberate shift inputs and keeps the control layout visually clear around the shifter area.
Model tools
RubberEdge Brush 0 Cone Model Supply
500908244€9.89
RubberEdge Brush 0 Cone is a model supply shaped for detail-led hobby work, combining a 0 size with a cone tip profile for controlled application on small sections. The single-brush format keeps the contents straightforward when a specific shape is needed for a modelling bench or as a direct replacement within an existing tool set. The product data identifies this brush as 1 piece and states an assembly time unit, voltage unit and operating time unit, but gives no corresponding values, so the usable focus stays on the named brush format itself. Within that format, the cone shape points to narrow contact areas and more exact placement than a wider brush head allows. The 0 designation further anchors it as a fine-detail option within model supplies, suited to tasks where a compact tip matters more than broad coverage. The product data also states that batteries are not included, with no battery-driven function indicated for the brush. On a hobby table, this brush fits neatly into careful finishing sessions, touch-up work and other small-scale application steps where a defined tip shape helps keep the working area tight. The age marking in the data is 14 Years.
Model tools
RubberEdge Brush 0 FlatEdge Model Brush
500908250€9.89
RubberEdge Brush 0 FlatEdge brings a focused tool format to detailed model finishing, with a size 0 profile and a flat edge that supports controlled paint placement on small sections and defined lines. In careful bench work, that shape helps keep strokes deliberate when edges, contours or compact painted areas need a tidier pass than a broader brush can provide. The product data identifies a single brush, so the setup stays centered on one dedicated painting tool rather than a mixed assortment. The FlatEdge form lends itself to measured coverage across short runs, while the size 0 format suits tighter working zones where larger tips can overwhelm the area. For hobby routines that involve touch-ups, trim painting or small visual accents, this brush adds a precise option to the painting kit. Age marking 14 Years is stated in the product data. Paints are required separately. On a model-building table, RubberEdge Brush 0 FlatEdge fits neatly into finishing stages such as edge work, small corrections and compact color application. It also works well as a dedicated brush kept aside for narrow painted details during repeat workshop sessions.
Model tools
RubberEdge Brush 0 TriEdge Model Brush
500908248€9.89
The RubberEdge Brush 0 TriEdge brings a focused painting tool to model finishing, with size 0 shaping aimed at narrow edges, small contours and controlled detail work. Its single-brush format suits hobby benches where careful paint placement matters more than broad coverage. The TriEdge form supports deliberate strokes around borders and tight sections, making it useful for trim lines, touch-ups and small painted accents on model parts. RubberEdge naming points to an edge-oriented brush concept that fits jobs where clean separation between painted areas is needed. With 1 brush included, the set stays simple and easy to slot into an existing painting setup without adding unnecessary bulk. The 14 Years marking places it within a hobby-focused range suited to more precise handling and finishing tasks. On the workbench, this brush fits moments that call for accuracy rather than speed, such as refining corners, following narrow outlines or correcting small areas after the main coat has dried. It also works well as a dedicated detailing brush kept alongside other painting tools for repeated fine-line tasks across different model projects.
Model tools
RubberEdge Brush 0, model brush, BaseCurve
500908246€9.89
RubberEdge Brush 0 BaseCurve brings a specialised shape to model painting, combining a 0 brush size with a BaseCurve profile for controlled work on edges, contours and smaller painted sections. In model finishing, that focused format helps paint follow shaped lines more cleanly than a broader brush intended for larger areas. As part of the model supplies range, this brush suits detail-led tasks where narrow coverage and careful placement matter. The RubberEdge naming and BaseCurve designation point to a brush designed around edge work rather than general broad coverage, making it a useful addition for trim areas, fine borders and touch-up stages within a paint session. The stated age marking is 14 Years. Batteries are not included, and no battery function is indicated for this brush. On the workbench, the compact 0 size supports slower, more deliberate brush control when a model build reaches the painting and finishing stage. It fits projects that call for neat colour placement around curved forms and defined edges, whether refining a single section or completing final painted details.
Model tools
RubberEdge Brush 2 BaseCurve Model Supply
500908247€10.29
RubberEdge Brush 2 BaseCurve is a model supply component named for precise identification within a hobby setup. The single-piece format keeps the focus on one clearly defined part, which matters when a bench stock list depends on exact designations rather than broad category labels. The product data states an assembly time unit in minutes, a maximum operating time unit in Minutes, a voltage unit in Volt and a maximum speed unit in km/h, but no verified figures are provided for this component. That leaves the confirmed substance of the listing in its exact name, its placement in Models & Accessories and Models Supplies, and its quantity of 1. For hobbyists managing repairs, replacements or planned builds, that exact naming helps separate this part from similar workshop supplies and supports cleaner reordering when a project calls for the same component again. Minimum age is stated as 14 Years. Batteries are not included. On a parts shelf, in a repair tray or alongside other model supplies, the single RubberEdge Brush 2 BaseCurve component can be kept ready for maintenance tasks where the exact part name is the key reference.
Model tools
RubberEdge Brush 2 Cone Model Supplies
500908245€10.29
RubberEdge Brush 2 Cone is listed as a model supplies accessory within the Carson Modelsport range, giving RC and scale-model workbenches a clearly named part for maintenance and workshop organisation. The short designation identifies this version as 2 Cone, which helps distinguish it from other supply parts when replacements or matching workshop stock are being selected. The available data supports a focused, factual profile rather than a broad feature list. This accessory belongs to the Models & Accessories area and sits specifically in Models Supplies, placing it in the practical side of hobby work where clearly identified parts matter. The age marking is 14 Years. Batteries are not included in the data, and no separate runtime, speed, voltage, dimensions, or pack contents beyond the stated designation are confirmed here, so the copy stays with the verified information. On the bench, a clearly labelled supplies part helps keep repair, upkeep, and parts sorting straightforward across ongoing RC and model-building sessions. It fits naturally into workshop routines where the exact accessory name matters as much as the part itself when planning replacements or maintaining a consistent stock of supplies.
Model tools
RubberEdge Brush 2 FlatEdge Model Supply
500908251€10.29
RubberEdge Brush 2 FlatEdge is a model supply built around a clearly defined brush format for painting and finishing work. The name points to a flat-edge brush shape, giving hobby benches a focused tool for controlled paint placement on edges, lines, and smaller sections where a broader brush can feel less exact. As a single brush, it suits restocking a specific tool rather than replacing a whole set at once. That makes it easy to keep a dedicated brush ready for touch-ups, detail passes, or careful coverage on parts that call for a flatter contact surface. The 14 Years age marking places it in a hobby context where steady handling and deliberate brush movement are part of the process. No battery is included, and none is needed for use. On the workbench, this brush fits neatly into painting sessions that move between base coverage and more precise finishing steps. It also works well as a spare kept alongside other model supplies, ready when a defined flat edge is the better match for the task at hand.
Model tools
RubberEdge Brush 2 TriEdge Model Supply
500908249€10.29
RubberEdge Brush 2 TriEdge is a clearly designated model supply part for hobby-oriented maintenance work. The product data identifies 1 included piece and states an assembly time unit in minutes, positioning this component within a setup where fitting or replacement is part of regular workshop handling. Within a model bench context, a named replacement part like this helps keep compatible equipment in service when an existing brush reaches the end of its usable life. The designation TriEdge gives this component a distinct identity inside the range, which matters when matching spare parts accurately to an established setup. The product data also states that batteries are not included, confirming that this listing is not a powered ready-to-run vehicle but a supply component in the models and accessories area. The age marking is 14 Years. Used as part of routine upkeep, a replacement brush belongs in the practical side of model ownership alongside fitting, checking and returning compatible equipment to operation. For hobbyists managing wear parts and workshop stock, a single replacement piece keeps the purchase focused on a specific maintenance task rather than a broader bundle.
Cars
Scalextric 1963 Monaco Grand Prix Twin 1:32
56004580A€134.99
Scalextric 1963 Monaco Grand Prix Twin brings the atmosphere of a historic street circuit into a 1:32 racing set built around 2 classic Grand Prix cars and a head-to-head layout. The 1963 Monaco theme gives each run a clear period identity, with compact single-seater styling that suits close racing and repeated lap sessions. The set sits within the powered vehicles category and centres on electric track racing rather than free-rolling play, so the action comes from controlled runs around the circuit and direct comparison between both cars. The twin format keeps the focus on side-by-side competition, making starts, lane changes in position and lap timing the core of each session. The 1:32 scale also places the set firmly in the established slot-car format, a size that works well for detailed racing scenes and regular home use. Batteries are not included. On a table, shelf base or dedicated racing area, the layout creates a clear setting for short duels or longer repeat sessions built around pace and consistency. The 14 Years age marking fits the more hobby-led character of a set that combines historic motorsport styling, electric track action and direct two-car competition in one box.
Cars
Scalextric 1965 Monte Carlo Rally Mini Triple Pack
56004488A€194.99
Scalextric brings the 1965 Monte Carlo Rally Mini Triple Pack to 1:32 scale with 3 classic Mini slot cars finished as a coordinated historic line-up. Red bodywork, period race numbers and Monte Carlo markings give the set a clear competition identity, while the grouped presentation creates an immediate sense of rally action on the track. Each car carries details that strengthen the period look, including front-mounted rally spotlights, chrome-style grilles and visible driver figures wearing helmets. The winter rally theme is pushed further through road-grime styling on the lower bodywork and bumpers, echoing the demanding conditions of a snowy stage. Together, these touches give the trio a unified appearance while still letting each car read as an individual racer within the set. The historic 1965 framing also makes the pack stand out as a focused motorsport edition rather than a mixed vehicle selection. On a home slot layout, the 3-car format supports close head-to-head racing and a fuller starting grid in one box. Parked between runs, the matching Minis also create a strong display group, with the shared livery direction and classic body shape holding attention on a shelf, in a cabinet or beside a track scene.
Accessories
Scalextric 1:32 Sport Skid Chicane Track Set
560008338€22.99
The Scalextric 1:32 Sport Skid Chicane brings a sharper technical element into a slot car circuit by inserting a defined left-right change of direction into the layout. As part of the Scalextric Sport system, this track section is built to alter the pace of a lap, turning a simple run of track into a point where timing, line choice and car control carry more weight. Used within a 1:32 circuit, the chicane changes how the surrounding sections behave as well. A fast straight leading into it becomes a braking zone, while the exit sets up the next corner or acceleration stretch in a different way than a standard curve. That makes it useful for refining home layouts, testing how different cars respond to tighter transitions, or giving familiar circuits a more deliberate handling section. The Sport Skid Chicane is a track accessory rather than a complete set, so it works as an expansion element within a broader build. On race day, the added direction change can separate close competitors by rewarding cleaner entries and steadier exits. Between sessions, it also gives layout planning a more tactical role, since even a single chicane can shift the balance of speed and control across the whole circuit.
Model car kit
Scalextric 1:32 TFATF Mazda RX7 Dom Toretto
560004592€67.99
Scalextric TFATF Mazda RX7 places Dom Toretto's car into a 1:32 slot racing format that combines film recognition with compact circuit action. The Mazda RX7 body shape and TFATF identity give the car a clear on-track presence as it threads through bends, straights and side-by-side racing moments on a home layout. This release sits in the powered vehicles range as an electric or battery car set accessory, making it a natural addition for existing slot racing systems built around 1:32 cars. The 14 Years age marking is stated for this version. Batteries are not included. The model name links the car directly to Dom Toretto, which gives themed race grids and franchise-based collections a precise character reference rather than a generic sports coupe. Its scale also helps when pairing it visually with other 1:32 vehicles in the same racing environment. On a living room circuit, club layout or display shelf between races, the TFATF Mazda RX7 carries a recognisable screen-car identity into every session. It suits collectors building a Fast and Furious line-up and racers who want a named movie car in regular slot competition.
Model car kit
Scalextric 1:32 Toyota Supra Castrol Car
560004616€59.99
The Scalextric Toyota Supra Castrol brings a well-known race-car shape into 1:32 slot racing, combining the named Castrol livery with the compact proportions used across many home circuit layouts. On the track, that scale creates a focused racing presence that reads clearly through bends, straights, and lane changes. This model is listed in the Vehicles and Powered Vehicles hierarchy and sits within electric or battery car sets and accessories, placing it firmly in the slot racing category rather than free-running RC use. The product data states an age marking of 14 Years. Batteries are not included in the product data. The Toyota Supra body theme gives the car a distinct motorsport character, while the Scalextric name connects it to an established slot racing system used for circuit-based driving. The 1:32 format also makes the car easy to combine with other models in the same scale for head-to-head lap sessions. Set on a compatible slot circuit, the guided running style keeps the action centred on throttle control, lane discipline, and repeat lap timing. Between races, the Castrol graphics and Toyota Supra silhouette give the car a strong shelf presence, then return it to active use for practice runs, paired racing, or a growing home layout.
Catalogues & merchandise
Scalextric 2026 Catalogue reference edition
560008571€3.99
The Scalextric 2026 Catalogue gathers the brand's 2026 range into one printed reference edition for browsing, checking line coverage and keeping current releases in view. As a catalogue, it serves as a compact source for range information under the Scalextric name rather than a vehicle or accessory itself. The product data states the 14 Years age marking for this edition. That age marking appears alongside a straightforward catalogue format, making the focus here the printed overview and the annual 2026 designation. Because the available data identifies this release specifically as the Scalextric 2026 Catalogue, the copy stays with that confirmed role and does not infer extra contents, page counts or special inserts that are not listed. Batteries are not included in the product data, and no battery-powered function is stated for this catalogue. Placed on a desk, beside a track layout or with a collection log, the catalogue gives a simple way to look through the 2026 Scalextric range away from a screen. It also works as a year-specific reference when comparing named lines or checking how the current assortment is presented in this edition.
Cars
Scalextric A-M GT3 Vantage Bathurst25 1:32
560004655€59.99
Scalextric A-M GT3 Vantage Bathurst25 Gulf Ed. brings a specific GT3 race car identity into 1:32 scale, giving slot layouts a model with a clearly named motorsport reference and a compact footprint for circuit running. The combination of A-M GT3 Vantage naming, Bathurst25 designation and Gulf Ed. finish creates a focused race theme that reads immediately on the track. Within a 1:32 collection, this version adds variety through its exact model designation rather than a generic sports car shape. The GT3 format connects it to modern circuit racing, while the Bathurst25 reference places the car within a recognisable event context. Gulf Ed. styling adds a strong visual signature that stands out through corners, on straights and in pit-lane display sections. The 14 Years age marking places it in a hobby-oriented range where scale, livery and named race versions matter as much as lap action. On a home circuit, the 1:32 format suits layouts where several cars share the same track plan and visual spacing matters during close racing. Between sessions, the same named edition also fits neatly into a shelf display alongside other GT and endurance-inspired models from the wider slot car world. Warning! Not suitable for children under 14 years.
Cars
Scalextric AMC Hornet 1:32 Gold Gun Car
560004551€85.00
Scalextric AMC Hornet T.M.W.T. Gold.Gun HD brings classic AMC coupe styling into a 1:32 scale slot car format, with a metallic gold finish that catches the light across the bonnet, roof and flanks. White side stripes and gold wheels sharpen the period look, while the compact proportions suit both racing layouts and display shelves. The body carries model-specific exterior details including AMC badging, the Hornet name on the front side fender area, a detailed front grille with red circular accents, round headlights, front bumper guards, a side mirror and windshield wipers. Black tyres with white sidewalls frame the car with a strong contrast against the reflective paint, and dark tinted windows complete the late-classic road car character. The T.M.W.T. Gold.Gun designation gives this version a distinct identity within a collection, and the 1:32 scale keeps it aligned with established slot car layouts and display standards. Set on a home circuit, the gold finish stands out clearly through bends and straights, making the car easy to pick out during close racing. Off the track, the detailed nose, side graphics and vintage proportions give the model a strong shelf presence alongside other classic road and muscle car releases.
Cars
Scalextric AMC Hornet Slot Car 1:32 Green
560004538€59.99
Scalextric AMC Hornet brings classic American coupe styling to a 1:32 slot car format, pairing a dark green body with white dual side stripes for a look that reads clearly the moment it reaches the track. The silver front bumper, black bumper guards and chrome-look window trim frame the shape with period detail that suits both running sessions and display. At the nose, round headlights sit beside a vertical-slat grille with 2 red circular centre accents, giving the front view a distinct identity drawn from the full-size AMC Hornet. Whitewall-style tyre rings and dark multi-spoke wheels continue that road-car character around the sides, while smaller exterior touches such as the side mirror, windshield wipers, hood emblem and rear quarter detailing add extra definition at close range. The 1:32 scale keeps the proportions familiar within a widely collected slot racing format, making the car easy to place alongside other trackside favourites. On a home circuit, the compact shape suits close lane-to-lane action and quick visual recognition through bends and straights. Between races, the combination of green paintwork, white striping and bright front-end detailing gives the model a strong display presence on a shelf, desk or collector cabinet.
Cars
Scalextric AMC Hornet TransAM Slot Car 1:32
560004583€59.99
Scalextric AMC Hornet TransAM brings B. Dwyer's race car into 1:32 scale with a body shape that carries the look of classic American circuit racing. The white finish, red and blue livery, number 77 and sponsor-style markings give the car a period TransAM identity that reads clearly on the track and on the shelf. The front end uses a retro grille with round headlights, while the front splitter and low, wide proportions push the racing character further. In a slot racing layout, those visual details make the car easy to pick out through bends, on straights and in a packed field of touring cars. The compact 1:32 format also makes it a natural match for existing Scalextric circuits, garage scenes and motorsport displays built around historic saloon racing themes. Between running sessions, the livery and stance give this model strong display value beside other classic racers. During race setups, the AMC Hornet TransAM fits neatly into themed grids, championship recreations or mixed-era line-ups where bold graphics and recognisable silhouettes matter as much as lap action. This slot car is recommended for ages 14 Years and up.
Race tracks
Scalextric ARC AIR World GT Race Set 1:32
560001434€319.99
Scalextric ARC AIR World GT brings 1:32 slot racing into a connected head to head format with 2 licensed GT cars and app-based race control. The set matches an Aston Martin Vantage GT3 with a Porsche 911 GT3 R on a circuit that fills a 243 cm x 243 cm area, creating a clear side by side layout with enough length for repeated overtakes, braking points and lap building. The 686 cm track gives the cars room to carry speed through the course while the ARC AIR system adds race management through Bluetooth app connection. Lap counting keeps each run easy to track, and 4 race modes change how each session unfolds without changing the physical layout. The wireless controllers remove the fixed cable position at the edge of the circuit, so movement around the track area stays more open during play. The GT theme is reinforced by the distinct race liveries, with the grey Aston Martin Vantage GT3 and the white and light blue Porsche 911 GT3 R giving each lane a clear visual identity. Set up on a floor space, table surface or hobby area where the full 243 cm x 243 cm circuit can stay visible for clean race management and quick restarts between heats. 14 Years marks the recommended age, and the connected format suits competitive sessions built around lap times, repeated duels and changing race modes. Warning! Not suitable for children under 14 years.
Cars
Scalextric Aston Martin DB5 Racing Car 1:32
560004599€59.99
Scalextric Aston Martin DB5 brings historic GT racing character into a 1:32 slot car format, combining the long, recognisable coupe shape of the DB5 with a layout made for circuit running and shelf presence between sessions. The Aston Martin DB5 name gives this model a strong classic motorsport identity, while the 1:32 scale places it in a widely collected slot racing size that fits hobby-focused track setups. Its historic GT racing theme shifts the emphasis from modern aero styling to period lines and a more traditional competition look. The compact format also makes it easy to store alongside other cars in the same scale and to rotate into different race line-ups without taking much space. With 14 Years stated in the data, the focus stays on hobby use and model appeal rather than simplified play framing. On a home circuit, the DB5 shape adds a distinctive visual note as it moves through bends and straights, especially when mixed with other touring and GT-inspired racers. Off the track, the classic silhouette and racing designation give it a clear place in a collection built around British motoring icons and historic competition cars.
Cars
Scalextric Austin Metro 6R4 1:32 Slot Car
560004668€59.99
Scalextric Austin Metro 6R4 D. Auriol brings a famous rally shape into 1:32 slot racing, combining the compact proportions of the Metro 6R4 with a named competition version that stands out on a home circuit. The model sits within the powered vehicle range and is marked 14 Years, aligning it with hobby use that values handling, setup, and repeat running on track. The 1:32 scale gives the car a familiar format for slot layouts, where lane-guided running keeps the action focused on pace, rhythm, and clean lines through each section of the circuit. The Austin Metro 6R4 name carries a strong rally identity, and the D. Auriol designation adds a specific reference point that collectors can place within a broader motorsport line-up. That combination makes the car work in 2 directions: as a recognisable racing model in a display row and as an active part of regular circuit sessions. The compact body style also suits tighter visual spacing on track, where several rally cars can share the same layout without losing their individual character. During running sessions, the named livery and 1:32 proportions make it easy to slot this car into rally-themed grids, timed laps, or head-to-head races on a home set. Between races, the Austin Metro 6R4 shape and D. Auriol identity give the model a clear place among classic competition cars in a collection.
Cars
Scalextric Austin Mini Cooper S Slot Car 1:32
560004545€59.99
Scalextric Austin Mini Cooper S captures the compact stance of the classic racer in 1:32 scale, pairing Jo Polley livery with a metallic purple body and gold-toned roof. Number 306 roundels, printed sponsor-style markings and chrome-look exterior trim give the slot car a vivid competition look as it runs through bends and straights on a home circuit. Clear windows, silver window surrounds, round headlight detailing and fine body lines build the period character beyond the main livery. Austin Cooper S badging at the rear adds another model-specific touch, while black wheels and visible windscreen wipers sharpen the close-up finish. The guide blade under the chassis sits in the slot groove to keep the car aligned with the rails during racing, so the handling action comes from the track system rather than free-rolling movement. This makes the model suited to repeat laps, side-by-side sessions and layout scenes where classic touring style matters as much as pace. On a scenic layout, the compact Mini silhouette and contrasting roof colour stay easy to pick out through corners and over longer track sections. Age 14+ marks the recommended use, making this slot car a strong fit for collectors, hobby racing setups and display shelves that focus on historic motorsport character.
Cars
Scalextric Batmobile 1989 1:32 HD Slot Car
560004492€75.99
Scalextric Batmobile 1989 HD brings the iconic 1989 screen car into 1:32 scale as a slot car with a long, low body, turbine-style nose, enclosed cockpit and dramatic rear fins. The black finish and covered rear wheel arches give the silhouette its unmistakable presence as it lines up on the rails for fast laps and close-up display alike. The bodyshell uses molded vents, side pipe elements and silver slat details to echo the mechanical look of the original design, while small bat emblems on the hubs and side panels add character without crowding the shape. Yellow front lights and red rear lights break up the dark bodywork and draw attention to the car's front and rear contours. The extended proportions, flared fenders and central canopy create a sleek profile that stands out on a home circuit, especially when placed alongside other 1:32 vehicles. Fine panel lines and sculpted surface textures give the model a crisp, defined look from nose to tail. On track, the Batmobile 1989 HD suits themed head-to-head racing, display between sessions and lineups built around film and comic-inspired vehicles. The 1:32 format also makes it a natural fit for collectors who want a recognisable movie car with a strong shelf presence and clear slot-racing identity. Warning! Not suitable for children under 14 years.
Cars
Scalextric BMW 330e NGTC 2023 Slot Car 1:32
560004526€69.99
Scalextric BMW 330e NGTC J. Hill 2023 HD captures the look of a modern touring car in a 1:32 slot racing format, bringing the blue and white race livery onto the track with crisp printed markings and a low, purposeful stance. Set into the guide groove of a slot layout, the car is built to follow the circuit line through sweeping bends and short straights while keeping the visual character of the full-size racer close at hand. The BMW 330e NGTC shape gives the model its distinct competition profile, and the J. Hill 2023 HD decoration adds the specific race identity that collectors and motorsport fans look for. Laser Tools branding, windscreen markings and additional sponsor graphics create a busier, more authentic body finish than a plain road-car design. The 1:32 scale also makes the car easy to place into existing scenery setups, from pit lane sections and grandstands to compact tabletop circuits where body detail remains clearly visible. On a home layout, this slot car suits close racing on technical curves as well as display between sessions, where the touring car silhouette and printed livery continue to carry the theme of the set. Minimum age 14 years is stated for this model. Whether running through a miniature town section or waiting on the grid beside other saloon racers, the car adds a current BTCC-style presence to a slot racing collection.
Cars
Scalextric BMW E36 320i BTCC 1995 1:32 Car
560004574€59.99
Scalextric BMW E36 320i BTCC 1995 D. Brabham captures a defined touring car from the 1995 British Touring Car Championship in 1:32 scale, bringing the shape and race identity of the BMW E36 into a format made for slot racing layouts and collector shelves. The named D. Brabham version gives this car a specific place within BTCC line-ups rather than a generic touring car look. The E36 body style, 1995 season reference and driver-specific markings create a model with clear motorsport context. In a display row, the proportions of the saloon racer and the period livery help it sit naturally alongside other touring car entries from the same era. On track, the 1:32 format matches the scale used across many home slot racing systems, making it a practical addition where variety in car choice matters as much as visual accuracy. The age marking is 14 Years. Batteries are not included. This car suits collectors building a BTCC grid, fans of BMW racing history, and slot racers adding another 1990s touring car to regular circuit sessions. Parked in the pit lane, lined up on the start grid, or run in head-to-head touring car races, it brings a recognisable championship machine into the mix.
Cars
Scalextric Brabham BT26 Monaco GP '69 Slot Car
560004521€79.99
Scalextric Brabham BT26 brings the Monaco GP '69 car into 1:32 scale with the slim nose, open cockpit and exposed-wheel Formula layout that defined late-1960s grand prix racing. The dark blue body, white aero elements and period number panels give the model a clear race-day identity as it threads through bends on a slot circuit. Close inspection reveals silver suspension parts, side exhaust pipes, rear wing supports and an exposed engine area with visible intake detail. Sponsor markings such as Dunlop, Autolite and Castrol deepen the historic racing character, while the seated driver figure with helmet adds another layer of realism to the cockpit view. The guide beneath the front section keeps the car aligned in the slot, turning the detailed body into a working racing model rather than a static replica. On a home layout, the compact 1:32 format suits head-to-head running, pit-lane scenes and display between races. Age 14 Years. Whether circling a straight, diving into a curve or parked trackside, the Brabham BT26 carries the look of a classic Formula machine in a format made for slot racing.
Model car kit
Scalextric BRM P57 1:32 Slot Car L.Bandini
560004610€67.99
Scalextric BRM P57 1:32 Slot Car L.Bandini brings a classic single-seater racing subject into a compact format shaped for home circuit use and motorsport collections. The designation names BRM P57, Scuderia Cen. Sud, and L.Bandini, giving this release a specific competition identity rather than a generic Formula-style car. The 1:32 scale supports easy integration with established slot racing layouts and keeps the proportions of the narrow body, exposed wheels, and open-cockpit style visually clear. The stated age marking is 14 Years. That makes the model suitable for hobby-focused racing sessions, display arrangements with other period cars, or line-ups built around historic grand prix themes. The combination of team reference and driver name also gives the car a more defined place within a collection, especially where individual race liveries matter as much as track action. On a home circuit, the BRM P57 shape brings a very different visual note from closed-body GT and touring cars, with the exposed-wheel silhouette reading instantly through bends and straights. Off the track, the named Scuderia Cen. Sud and L.Bandini designation gives the model a clear identity for shelf display beside other 1:32 racing subjects.
Cars
Scalextric BRM P57 Slot Car 1:32 Dutch GP
560004536€79.99
Scalextric BRM P57 brings the 1962 Dutch GP winner into a 1:32 slot car format that combines historic Formula racing character with compact circuit action. The HD finish sharpens the car's visual definition, so the low, open-wheel silhouette reads clearly through bends, straights and grid line-ups. The BRM P57 designation anchors the model to a specific Grand Prix machine rather than a generic single-seater, and the Winner Dutch GP 1962 livery gives it a precise place in racing history. In a slot racing collection, that makes it easy to pair with other period cars for era-based grids and head-to-head sessions. The 1:32 scale also keeps the car in step with a widely collected slot format, which helps when building a field with matching proportions across the circuit. The age marking of 14 Years is stated for this model. On the track, the compact Formula body suits repeated lap running, side-by-side duels and timed sessions on home layouts. Between races, the same race-specific identity gives the car presence on a shelf, where the 1962 Dutch GP connection and the BRM P57 name remain the focus.
Cars
Scalextric BTTF 2 Flying Time Machine 1:32
560004541€67.99
Scalextric BTTF 2 Flying Time Machine brings the futuristic look of the film car into a compact 1:32 slot car format, pairing the familiar DeLorean-style silhouette with flying mode details that stand out on a home circuit. The metallic silver finish, dark tinted windows and black front grille create a crisp contrast that keeps the shape readable at speed and striking when the car is parked between runs. Around the body, exposed tubing, cables and rear technical parts build the time-machine character into the shell rather than leaving it as a plain road car. Rectangular headlights and the DMC marking strengthen the recognisable front view, while the lowered wheel position gives the whole model its hover-style stance from Back to the Future Part II. The compact scale makes it easy to place into a film-themed collection, and the detailed exterior gives plenty to take in during closer viewing between races. On a slot car circuit, the flying mode styling adds a cinematic note to head-to-head laps and themed race setups. Off the track, the silver body and sci-fi detailing give the model a strong shelf presence alongside other screen-inspired vehicles. Age 14+
Cars
Scalextric Cadillac V-Ser.R #01 1:32 Car
560004586€59.99
Scalextric Cadillac V-Ser.R #01 brings the look of the 12H Sebring 24 race entry into a 1:32 slot car format with a clearly identified car, event reference and race number. The combination of Cadillac V-Ser.R naming and #01 markings gives the model a direct link to contemporary endurance racing while keeping the footprint suited to home circuit use. The 1:32 scale makes the car easy to place alongside other models in the same format, whether the focus is running sessions on a slot layout or arranging a motorsport collection by class and event. Its Sebring 24 reference sets it apart from a generic prototype-style racer by tying the bodywork to a named race appearance. The ShortDescription identifies this release as a single Cadillac V-Ser.R #01 version rather than an assortment, so the model focus stays specific and easy to recognise. Batteries are not included. The age marking is 14 Years. On track, the compact 1:32 format suits repeated laps, side-by-side comparisons with other race cars and themed endurance line-ups built around real entries. Off the circuit, the #01 numbering and Sebring 24 identity give the model a clear place in a display centred on modern racing machines and event-based collecting.
Model car kit
Scalextric Cadillac V-Ser.R 1:32 Atlanta24
560004611€59.99
Scalextric Cadillac V-Ser.R brings the Atlanta24 Pink race look into a compact 1:32 format that reads clearly on the circuit and on display. The named Cadillac body gives this slot car a recognisable endurance-racing identity, while the pink finish adds strong contrast as the car moves through bends, straights, and lane changes. The 1:32 scale makes this model easy to place alongside other cars in the same format, supporting a consistent track setup and a balanced visual line on the grid. Its classification within powered vehicle car sets and accessories places it naturally into home racing layouts where model choice shapes the character of each session. The V-Ser.R designation and Atlanta24 reference give the car a specific motorsport flavour rather than a generic race theme, which helps the model stand out in a collection built around named cars and event-linked liveries. On a home circuit, the bold body colour remains easy to pick out during repeated laps and head-to-head running. Between races, the same livery and model name give the car a strong shelf presence for collectors who group cars by marque, race style, or scale. Age marking: 14 Years.
Cars
Scalextric Cadillac V-Serie R Slot Car 1:32
560004512€69.99
The Scalextric Cadillac V-Serie R brings the look of the 24h LM23 #2 endurance racer into a 1:32 slot car format, combining a low-slung prototype body with the visual impact of modern hypercar design. Blue, black, silver and red livery details give the model a strong race-day presence as it threads through bends and straights on the track. Its body shape reflects full-size endurance racing cues with a large rear wing, front splitter, enclosed cockpit and central fin, all working together to create the unmistakable silhouette of a contemporary Le Mans contender. Fine printed markings such as CADILLAC, HY, HYPER CAR and 24h LE MANS deepen the replica character, while sponsor graphics including Mobil 1 and Michelin add the layered finish seen on the race car. Silver multi-spoke wheels, detailed headlights, side mirrors and sculpted rear aero surfaces add further definition from every angle. On a home circuit, the compact 1:32 scale makes the car easy to place into mixed grids, endurance-themed layouts and head-to-head sessions. The detailed bodywork also gives the model a strong static presence between races, whether parked in the pit lane, lined up on the start grid or set alongside other modern prototype racers in a collection.
Cars
Scalextric Cadillac V-Serie R Whelen #31 1:32
560004515€69.99
Scalextric Cadillac V-Serie R Whelen #31 HD brings modern endurance-racing form to 1:32 slot action with a low prototype profile, enclosed cockpit canopy and a bold red, black and white livery. The body captures the visual character of the Cadillac V-Series.R, so the car stands out immediately on the track with its long, planted stance and sharply defined aero surfaces. Across the shell, printed sponsor graphics and race markings add depth to the replica, including Whelen, Cadillac, WeatherTech and the number 31. The front section shows sculpted intakes and a splitter-led nose, while the upper body carries a roof scoop and central fin that echo the full-size racer. Side mirrors, silver multi-spoke wheels and slick tyres sharpen the competition look further, and the rear view is defined by a large wing and diffuser-style shaping. Driver names printed beside the cockpit add another motorsport detail drawn from the race car's livery. On a home circuit, the compact 1:32 format suits close racing, lane changes and display between sessions. Whether running repeated laps or taking a place in a motorsport collection, this Scalextric car combines recognisable Cadillac prototype styling with dense printed detail and a track-focused silhouette.
Model car kit
Scalextric Captain Scarlett Patrol Car 1:32
560004641€67.99
The Scalextric Captain Scarlett Spectr. Patrol Car brings a recognisable screen vehicle into 1:32 slot racing, combining the Captain Scarlett design with the compact proportions used across many home circuit layouts. Its format makes it easy to place on a compatible track and equally easy to present as part of a themed vehicle lineup. The Patrol Car designation gives this release a clear identity within the Captain Scarlett world, while the 1:32 scale keeps it aligned with a widely collected slot car format. This is a single vehicle model rather than an assortment, so the design shown is the design supplied. Batteries are not included. The stated age marking is 14 Years. With its screen-based styling and focused silhouette, the car adds a distinct science-fiction note beside contemporary racers, classic touring cars or other character vehicles in the same scale. On a home circuit, the model fits naturally into themed race sessions where television and film vehicles share the lane with standard slot cars. Away from the track, the Captain Scarlett Spectr. Patrol Car also works as a compact display piece that carries the look of the original design without needing a large footprint.
Model car kit
Scalextric Captain Scarlett SPV Vehicle 1:32
560004605€71.99
Scalextric Captain Scarlett SPV brings the distinctive vehicle from the Captain Scarlett universe into a compact 1:32 format that reads clearly in a collection and holds its recognisable shape in a small footprint. The exact Captain Scarlett SPV designation keeps the connection to the source material front and centre, giving the model a strong identity for display. The 1:32 scale makes this release easy to place with other vehicles in the same format, whether the setting is a cabinet, a desk, or a dedicated hobby shelf. Its appeal comes from the combination of a known screen machine and a measured model scale, rather than from oversized dimensions or added gimmicks. The stated age marking is 14 years. Batteries are not included. In a display line-up, the Captain Scarlett SPV can sit as a standalone focal point or as part of a broader science-fiction vehicle arrangement. It also works well in collections built around television memorabilia, where the exact name and compact scale help keep the theme coherent across multiple pieces.
Cars
Scalextric Chevrolet Camaro Castrol TA71 1:32
560004643€59.99
Scalextric Chevrolet Camaro Castrol TA71 brings the presence of the Chevrolet Camaro to a 1:32 slot car format shaped for fast laps and close racing on home track layouts. The Castrol TA71 livery gives the model a clear competition identity, with bold race graphics that stand out as the car moves through bends, straights and side-by-side chases. The 1:32 scale makes this slot car easy to integrate into established racing collections and circuit setups where matching scale matters. Its compact format suits both active running and display, giving the model a place on the track as well as on a shelf between sessions. The focus here is the recognisable Camaro body shape paired with a motorsport finish that captures the look of a race-prepared car. Age marking 14 years and up is stated for this model. On a home circuit, the guided slot format supports controlled racing lines and close lap-by-lap competition. Set on the rails with other 1:32 cars, the Chevrolet Camaro Castrol TA71 adds a distinct visual identity to race nights, practice runs and collection displays built around classic motorsport themes.
Cars
Scalextric Chevrolet Camaro Z28 DTM 1982 1:32
560004300€59.99
Scalextric brings the Chevrolet Camaro Z28 from Peter John in DTM 1982 to the slot racing circuit in 1:32 scale, combining classic muscle-car proportions with a competition livery built around race number 77, American Car Service branding and period sponsor graphics. The low front, flared arches and rear spoiler give the model a planted racing silhouette that stands out as it threads through bends on a compatible slot track. The body carries white, red and blue graphics with stars-and-stripes styling across the roof, sides and rear quarters, creating a strong visual link to the full-size race car. Gold-style wheels, dark tinted windows and printed details such as Veedol, Goodyear and Bilstein markings add depth across the shell. A guide blade is fitted beneath the front, showing the car's intended use on electric slot systems rather than free-rolling play. Inside, a helmeted driver figure is visible in the cockpit, adding scale detail that complements the exterior decoration. On a home circuit, the 1:32 format suits close racing, lane changes and compact layouts where the car's shape and livery stay easy to read at speed. Between sessions, the same printed details and recognisable Camaro profile give the model a strong display presence for motorsport collections focused on touring car history.
Cars
Scalextric Chevrolet Corvette C8 R 1:32 Car
560004558€69.99
Scalextric Chevrolet Corvette C8 R brings the look of the 24h LM23 racer into a 1:32 slot car format, combining a low-slung competition body with bold yellow race colours and the unmistakable profile of the modern Corvette C8 R. The number 33 livery, sponsor-style graphics and contrasting red mirror caps give the car a clear endurance-racing identity as it lines up on the circuit. The body shape carries the visual language of GT competition through a deep front grille, front splitter, hood vents, side air intake and a large rear wing. Grey accents across the roof and lower body break up the yellow finish and sharpen the race-prepared look, while black side skirts and black multi-spoke wheels reinforce the planted stance. The C8.R marking on the side skirt adds another model-specific detail, and the low-profile tyre look completes the track-focused appearance. On a home circuit, the compact 1:32 scale suits close racing, pit-lane scenes and line-ups with other endurance cars. Away from the track, the detailed livery and aggressive aero surfaces give the model a strong shelf presence for collectors aged 14 Years and up.
Cars
Scalextric Colin McRae Triple Pack 1:32 Set
56004612A€194.99
Scalextric Colin McRae Triple Pack gathers 3 rally car models into a single 1:32 scale set with a motorsport focus shaped around the Colin McRae name. The triple-pack format creates a ready-made line-up that reads as a collection rather than a standalone vehicle, giving shelves, display cabinets, and trackside scenes a more unified look. The 1:32 scale makes the set easy to place within an established slot racing or model car collection where matching proportions matter. Because the available data identifies this as part of Vehicles and Powered Vehicles, the set sits naturally within a hobby context built around car layouts, motorsport themes, and named model groupings. The age marking is 14 Years. No batteries are included according to the product data. On a display shelf, the 3-car format creates a compact rally grouping with a shared identity instead of a mixed assortment. Within a home collection, the set can anchor a Colin McRae themed section, sit alongside other 1:32 vehicles, or add a recognisable motorsport reference to a slot car layout. Warning! Not suitable for children under 14 years.
Cars
Scalextric Dodge Monaco NY State Police 1:32
560004636€59.99
Scalextric Dodge Monaco NY State Police brings a recognisable police-car theme into 1:32 slot racing, combining the named Dodge Monaco format with a layout-friendly scale that reads clearly on home circuits and display shelves. The 14 Years age marking is stated in the product data, and the focused NY State Police identity gives the car a distinct place in road-race scenes built around pursuit, traffic, and period vehicle line-ups. Within the Vehicles and Powered Vehicles category, this model is positioned as an accessory for electric or battery car sets, which makes it a natural addition to existing slot racing systems rather than a standalone toy car. The 1:32 proportion is a widely collected format for track layouts, helping the body style sit convincingly beside other road cars from the same scale. The Dodge Monaco name adds a specific full-size vehicle reference instead of a generic police theme, which gives themed collections a more exact match. With batteries not included in the product data, no battery content is stated as part of the set. On a circuit, the NY State Police livery suits chase-style race sessions, city-route layouts, and display scenes that mix emergency vehicles with civilian traffic. Off the track, the named Dodge Monaco format and 1:32 scale also make the car easy to place in a cabinet, on a shelf, or beside other Scalextric road vehicles for a more coherent collection view. Warning! Not suitable for children under 14 years.
Cars
Scalextric Dodge Monaco Slot Car Chicago Fire
560004408€69.99
Scalextric Dodge Monaco Slot Car Chicago Fire brings classic American emergency-vehicle styling to a 1:32 slot racing format, with a red body, black roof and Chicago Fire Dept. markings that stand out clearly as the car moves through bends and straights. The Dodge Monaco shape is matched with chrome trim, grille and bumpers, giving the model the crisp contrast and period look associated with a vintage command car. The body carries number 7 graphics and printed Dodge and Monaco badging, while clear windows open the view to a seated driver figure in the cabin. On the roof, 2 red beacon lights and a central siren unit recreate the distinctive equipment layout of a fire department chief's car. A long antenna on the front fender and side mirrors add further scale detail, and the red wheels keep the visual theme consistent from nose to tail. The guide blade and metal pickup layout place the car on standard slot rails for powered running. On a home circuit, the Chicago Fire livery gives race sessions a strong visual identity beside standard road cars and competition machines. Between runs, the detailed roof hardware, printed markings and chrome exterior parts also make the model a striking addition to a shelf, desk or display case for collectors of emergency vehicles and classic American sedans.
Cars
Scalextric FAB-1 Thunderbirds HD Car 1:32
560004479€75.99
Scalextric FAB-1 Thunderbirds HD brings the famous Thunderbirds car to the slot car track in 1:32 scale, combining its stretched limousine shape, 6-wheel layout and bubble-style canopy with a format made for fast, visible laps. The glossy pink finish, chrome-effect grille and silver trim lines give the model the unmistakable FAB-1 presence seen in the series. At the front, twin round headlight clusters frame the tall grille, while chrome bumpers and the FAB1 plate sharpen the recognisable face of the car. The long body is matched by two rear antennas and a dark tinted canopy roof, details that help the silhouette stay readable even in motion. As a stylised fantasy vehicle, FAB-1 stands apart from standard race cars with a luxurious retro-futuristic look that adds character to a slot car collection. The 1:32 format also makes it easy to place alongside other cars in the same scale for themed racing sessions or display. On a home circuit, the extended profile and 6-wheel design create a memorable visual rhythm as the car moves through curves and straights. Between races, the bold pink body and chrome detailing give the model a strong shelf presence for Thunderbirds fans and collectors aged 14 years and up.
Cars
Scalextric Fast & Furious Hot Laps Set
560001458€184.99
Scalextric Fast & Furious Hot Laps brings 1:32 scale slot racing into a compact head-to-head layout with 2 movie-inspired cars, a dual-lane circuit and a raised crossover bridge that changes the rhythm of each lap. The orange tuner-style car and black muscle car line up under the start area for side-by-side runs with a clear arcade racing feel. The circuit uses a multi-level layout, with a lower loop, an upper section and a bridge that creates a more varied driving line than a flat oval. A lap timer tower sits over the straight and frames the race around visible lane markers, lap readouts and start-finish graphics. Wired hand controllers connect directly to the set and use red and blue triggers for lane-specific throttle control, so each squeeze changes pace through corners, bridge entries and the main straight. Mains power keeps the action continuous, and batteries are not included because the set uses the supplied power adapter. Race sessions can stay quick with short duels on the assembled layout, or stretch into repeated attempts to improve lap consistency between the red and blue lanes. The Fast & Furious theme, the contrasting car styles and the marked race sections give the set a strong visual presence on a table, shelf or games room setup while keeping the focus on direct 2-car competition.
Cars
Scalextric Fast and Furious 25Years 1:32 Car
560001465€159.99
Scalextric Fast and Furious 25Years brings film-led character to slot racing in a 1:32 format, combining a recognisable themed finish with the guided driving style that defines home circuit competition. The 14 Years age marking places this release in a hobby-focused category, and the compact scale suits established collections as well as regular track use. Within a slot racing layout, a 1:32 car adds more than shelf presence. It gives each lane battle a distinct visual identity, especially when the bodywork draws on a well-known screen theme such as Fast and Furious 25Years. The guided circuit format keeps the action tied to the rails, so the emphasis stays on throttle control, lap rhythm and close racing rather than open-floor driving. That makes this model a natural fit for line-ups built around repeatable runs, head-to-head sessions and themed vehicle groups. The Scalextric name also places it clearly within a recognised slot car system, which matters when expanding an existing garage. On the track, this car suits evening race sessions, display cabinets built around film vehicles, or a growing 1:32 collection that mixes competition and character themes. It also works as a focused addition for collectors who want a model linked to Fast and Furious 25Years without moving outside the slot racing format.
Cars
Scalextric Ford Anglia 105e 1:32 Slot Car
560004584€59.99
Scalextric Ford Anglia 105e G.Polley 306 captures a compact saloon racing shape in 1:32 scale, bringing a recognisable competition look to slot car layouts and display shelves alike. The named G.Polley 306 decoration gives this model a clear identity, so the car reads as more than a generic classic racer when lined up on the circuit. The Ford Anglia 105e body shape adds a distinct period profile, with upright proportions that stand apart from lower, later racing cars in the same scale. That difference changes the visual rhythm of a layout, especially when mixed with other historic saloons and touring-style entries. The 1:32 format keeps the model aligned with the standard scale used across many home and collector slot racing setups, which helps when building a grid with consistent proportions. The age marking is 14 Years. Batteries are not included. On track, this model suits race nights built around classic saloon themes, while off track it sits neatly in a cabinet or on a shelf beside other 1:32 competition cars. The compact scale also makes it easy to rotate between running sessions and collection display without taking much space.
Cars
Scalextric Ford Anglia 105E Broadspeed #30 1:32
560004546€69.99
Scalextric Ford Anglia 105E Broadspeed #30 brings classic saloon racing onto a 1:32 slot layout with a compact body, period livery and a front guide system that locks into the track groove for controlled running. The burgundy finish, silver roof and Team Broadspeed markings give the car a clear historic identity that stands out as it threads through straights and bends. The body captures the upright proportions of the Ford Anglia 105E, with round headlight detailing, a silver grille, chrome-style trim and black number panels carrying 30 in white. Through the side windows, the interior shows red seats, a driver figure in a red helmet and roll bar detail that adds depth beyond the outer shell. White lower side stripes sharpen the side profile, while the rear carries Anglia lettering that ties the model back to the full-size racer. The pickup assembly sits beneath the front end, showing the working slot racing mechanism rather than a static display-only format. On home circuits, the classic short-wheelbase shape gives the car a lively visual stance through corners and lane changes. Between races, the same livery details, roof branding and vintage proportions make it easy to place on a shelf alongside other historic touring and saloon racers. Warning! Not suitable for children under 14 years.
Model car kit
Scalextric Ford Anglia 105e Car 1:32 Scale
560004617€59.99
Scalextric Ford Anglia 105e Theo Paphitis brings a compact classic shape into 1:32 scale for slot racing layouts with a strong period character. The named Theo Paphitis version gives this car a specific identity on the circuit, whether it joins a home racing set or takes its place in a line-up of road and saloon models. Its small, upright body style and recognisable Ford Anglia 105e silhouette create a very different visual rhythm from lower, wider racing cars, which helps vary the look of a track scene. In a 1:32 collection, that scale keeps the car aligned with matching track systems, scenery and other vehicles built to the same proportion. The electric vehicle category places it within powered racing play, while the single-car format makes it easy to add one more model to an existing garage of slot cars. The 14 Years age marking keeps the recommendation clear and exact. On the track, this car suits compact circuits, mixed-class grids and classic-themed race sessions where shape and identity matter as much as lap action. Away from running sessions, the Theo Paphitis designation and Ford Anglia 105e form also give the model a clear place on a shelf beside other 1:32 road cars.
Cars
Scalextric Ford Anglia 105E Harry Potter 1:32
560004504€75.99
Scalextric Ford Anglia 105E Harry Potter 1:32 brings the familiar shape of the Wizarding World car onto slot racing rails with a light blue body, white roof and classic 4-door saloon profile. The 1:32 scale format gives the model a strong presence on home circuits, where the period lines, bright trim and visible cabin figures stand out as it moves through bends and past grandstand sections. The bodywork carries chrome-look bumpers, grille, side trim, mirrors and windscreen wipers, all chosen to match the character of the Ford Anglia 105E. Whitewall-style tyres and the 7990 TD registration add further screen-linked detail, while the large window area keeps the 2 seated figures visible from several angles. Underneath the front section, the guide blade and pickup hardware show its intended role on a slot track rather than as a static model alone. The classic saloon proportions also make it easy to spot in a mixed 1:32 line-up beside modern racers and endurance cars. On a home circuit, the Harry Potter theme gives race nights a distinct visual twist, whether the car is running solo laps, joining film-inspired grids or taking a place in a display case between sessions. The combination of licensed character detail, vintage Ford styling and track-focused construction suits collectors and slot racing fans aged 14 Years and up.
Cars
Scalextric Ford Capri MKIII Slot Car 1:32
560004544€59.99
The Scalextric Ford Capri MKIII brings Gerry Marshall's number 14 racer to the slot car track in 1:32 scale, combining the long fastback coupe profile with blue and white touring car livery for a model that reads clearly at speed and still rewards a closer look between sessions. Across the body, the period sponsor markings, Ford branding and race number placement recreate the look of a classic competition machine rather than a generic coupe. The front end carries quad headlights and a black grille, while the side view adds flared arches, silver multi-spoke wheels and side mirrors that sharpen the silhouette. A rear spoiler extends the race-prepared stance, and the tinted windows frame a visible driver figure inside. These details give the car a strong track presence on home slot layouts and a convincing period look when parked in a collection. With its compact 1:32 format, the model fits naturally into regular slot racing sessions, whether running solo laps, timed heats or side-by-side battles on a home circuit. The Gerry Marshall decoration, number 14 graphics and classic Ford Capri MKIII shape also make it a strong choice for display alongside other touring car legends. Age 14 Years+
Cars
Scalextric Ford Escort Cosworth 1:32 Car
560004629€67.99
Scalextric presents the Ford Escort Cosworth in 1:32 scale with Alistair McRae livery, translating a well-known rally shape into a compact slot car format for circuit running and shelf display. The combination of the Escort Cosworth body and race-inspired decoration gives the model a clear motorsport presence while keeping the footprint suited to home track layouts. The 1:32 format makes this car easy to place within an existing slot racing collection and helps create balanced grids with other models in the same scale. The Alistair McRae graphics bring a specific competition identity rather than a generic road-car finish, which gives the car a more defined role in rally-themed line-ups and stage-inspired race sessions. Within the Powered Vehicles category, the model serves as an electric car set accessory, so it adds another named vehicle to a broader racing roster instead of standing in as a general spare. On a home circuit, the Ford Escort Cosworth shape and rally livery suit close racing sessions, timed laps and display between runs. The 14 Years age marking places it in a hobby context, and the compact 1:32 size keeps storage, handling and line-up building straightforward.
Cars
Scalextric Ford Escort Mk.1 RSR Slot Car 1:32
560004571€59.99
Scalextric Ford Escort Mk.1 RSR brings classic touring car character into 1:32 scale with the T.Ovenden livery, a compact coupe shape, and race-bred bodywork that gives the model a focused presence on any slot layout. The red finish, yellow-gold striping, and number 74 graphics create a period-inspired competition look with strong contrast across the bonnet, sides, and glazing. The body details go beyond the main livery. A black grille, round headlights, hood pins, and dark tinted windows define the front and cabin areas, while widened arches frame the lowered stance with a purposeful track look. Sponsor-style markings on the rear side panel and OVENDEN lettering beside the side window add another layer of race-day identity. The large rear wing and black front splitter shape the silhouette into a more aggressive RSR interpretation of the Ford Escort Mk.1, and the black multi-spoke wheels complete the visual balance with a crisp motorsport finish. On a home circuit, the model brings strong visual contrast through bends and along straights, where the bold stripes and race number stay easy to pick out at speed. Off the track, the same detailing gives the car a clear display presence for shelves, cabinets, or line-ups built around classic saloon racing themes.
Cars
Scalextric Ford Escort Mk1 1:32 Slot Car
560004590€59.99
Scalextric Ford Escort Mk1 1:32 Slot Car brings the compact proportions of a classic competition machine into a format made for slot racing. The ShortDescription names the ACE N.Whiting version, giving this release a specific livery identity rather than a generic road-car finish. At 1:32 scale, the model fits naturally into collections and race line-ups built around the same slot car standard. The Ford Escort Mk1 shape carries the upright, compact body style that made the original such a recognisable motorsport silhouette. The named ACE N.Whiting decoration adds a clear point of distinction for collectors who follow particular race liveries and historic touring car themes. The data also marks this release at 14 Years, keeping the age information plain and exact. On the track, the small scale supports close racing, quick lane changes through bends, and easy integration with existing 1:32 slot layouts. Parked between sessions, the Ford Escort Mk1 and its ACE N.Whiting identity also give the car a strong place in a display line focused on classic saloons and competition legends.
Cars
Scalextric Ford Escort MK1 Fast & Furious 1:32
560004677€67.99
Scalextric Ford Escort MK1 Fast & Furious brings a classic Ford shape into a 1:32 slot car format with a screen-linked edition theme and a compact footprint suited to home circuit layouts. The MK1 silhouette reads clearly at a glance, giving each lap a recognisable road-car character while the electric track system keeps the running line guided through straights and bends. This release is listed for ages 14 years and up and sits within the powered vehicle range as an electric battery car set accessory. The 1:32 scale makes it easy to place alongside other cars in the same format for matched visual proportion across a layout. Its Fast & Furious edition identity adds a distinct collecting angle for film-car fans as well as slot racing enthusiasts. The compact scale also suits display shelves, pit-lane scenes and smaller circuit plans where full-size detailing still needs to read cleanly. On the track, the guided slot format supports repeated laps, side-by-side circuit line-ups and quick car changes during race sessions. Away from running time, the Ford Escort MK1 shape and named edition make it a strong display piece within a Scalextric collection or a broader line-up of classic performance cars. Warning! Not suitable for children under 14 years.
Cars
Scalextric Ford Escort WRC Monte Carlo 1:32
560004513€77.99
Scalextric Ford Escort WRC Monte Carlo 1:32 brings late-1990s rally character into a compact replica with the stance, graphics and body details of the 1998 competition car. The blue and white Ford livery, race number 7 and Rallye Monte-Carlo markings give the model an immediately recognisable event identity, while the Escort banner across the windscreen ties the whole look together. The shell carries a strong set of rally-specific features, including hood vents, a roof scoop, a roof antenna and a large rear wing. Sponsor markings from Ford, Valvoline, Michelin, Sparco and O.Z Racing build the period-correct competition look across the body sides, bonnet and bumper areas. Driver and co-driver names on the side windows add another layer of replica detail, and the widened arches, front intake openings, rear lights and visible exhaust help the model read convincingly from front, side and rear views. The 1:32 scale keeps the proportions compact while still leaving room for the livery and body shaping to stay clear and legible. On a shelf, in a display line-up or alongside other rally cars from the same era, this model brings a distinct Monte Carlo presence through its event markings and Escort WRC silhouette. The 14 Years age marking suits collectors and motorsport fans looking for a detailed small-scale Ford rally replica. Warning! Not suitable for children under 14 years.
Cars
Scalextric Ford GT40 BOAC 1968 #8 Slot Car
560004495€69.99
Scalextric Ford GT40 BOAC 1968 #8 brings a famous endurance-racing shape into a compact 1:32 slot car format. The low nose, long tail and broad rear wing give the model a planted competition stance that reads clearly on a home circuit or on display beside other historic racers. The body carries number 8 roundels and period-style race graphics that place it firmly in late-1960s motorsport. Close viewing reveals further character in the black headlight covers, front mesh grille, side intake treatment, round rear lamps and twin central exhaust outlets. The metallic gold finish works with the dark lower accents to sharpen the car's profile, while the wheel and tyre detailing supports the look of a full race entry rather than a generic road car. Age recommendation: 14 years+ Set on the track, the model adds visual variety to endurance grids and historic racing scenes with its unmistakable GT40 proportions and BOAC 1968 identity. Off the circuit, the same detailing gives it presence in a cabinet, on a desk or alongside other 1:32 motorsport replicas where livery, shape and race-number history matter just as much as motion. Warning! Not suitable for children under 14 years.
Cars
Scalextric Ford Lotus Cortina 1:32 Race Car
560004540€59.99
Scalextric Ford Lotus Cortina brings classic touring-car style to a 1:32 slot racing format, pairing its compact racing proportions with dark green bodywork, a gold side stripe and bold number 44 roundels. The boxy silhouette, low stance and period detailing give the car a clear historic motorsport character on the track and on the shelf. Viewed up close, the body shows round headlight covers, hood vents, a wide front grille and black window frames that sharpen the vintage race look beyond the main livery. Additional side markings and sponsor-style graphics add another layer of circuit-era detail, while the multi-spoke wheels reinforce the competition setup suggested by the lowered stance. The model is marked 14+ and suits collectors and slot racing fans looking for a car with a recognisable classic saloon profile rather than a modern GT shape. On a home circuit, the defined number circles and contrasting stripe stay easy to pick out through corners and on straights, which helps the car read clearly during close racing. Between sessions, the same exterior detailing gives the Ford Lotus Cortina a strong display presence in a 1:32 line-up of historic race cars.
Cars
Scalextric Ford Lotus Cortina Gulf Edition 1:32
560004669€59.99
Scalextric Ford Lotus Cortina Gulf Edition captures a classic saloon racing icon in 1:32 scale, pairing the compact Ford Lotus Cortina shape with the unmistakable Gulf Edition finish. Set on a slot car format for circuit use, it brings period touring car character straight onto home racing layouts, where the low, upright body and competition look stand out through every lap. The 1:32 scale makes this release easy to place alongside other cars built for the same circuit format, whether the focus is close racing, grid building, or a line-up of historic motorsport subjects. The Ford Lotus Cortina name carries strong racing heritage, and the Gulf Edition livery gives this version a clear visual identity that reads instantly on the track. As a powered vehicle in the Scalextric range, it suits repeated running on compatible slot layouts while also holding its shape as a display piece between sessions. On a home circuit, the compact saloon profile brings a different visual rhythm from GT and prototype racers, adding variety to mixed-class line-ups and classic race recreations. The 14 Years age marking keeps the recommendation clear, while the detailed body and recognisable decoration support both collecting and regular circuit use. Warning! Not suitable for children under 14 years.
Cars
Scalextric Ford Mustang Fast And Furious 6 1:32
560004664€67.99
Scalextric Ford Mustang Fast And Furious 6 brings a well-known screen car into 1:32 scale, combining the unmistakable Ford Mustang shape with the visual identity linked to Fast And Furious 6. The compact format suits slot car collections where film vehicles, road cars and racing favourites share the same track system or display space. The 14 Years age marking places this model within hobby-focused ranges rather than early play categories. Its appeal comes from the combination of a recognisable marque, a named film connection and a scale that fits established slot car layouts. In mixed collections, a car like this adds variety through its cinematic reference rather than through race livery alone. The 1:32 format also makes it easy to pair with other vehicles in the same scale for consistent presentation across shelves, cases or home circuits. On a home track, the Ford Mustang theme brings a different visual note to race sessions, especially when grouped with other road-inspired cars and film vehicles. Off the circuit, the same model works as a compact collector piece that keeps the Fast And Furious 6 connection visible in a display of 1:32 favourites. Warning! Not suitable for children under 14 years.
Cars
Scalextric Ford Mustang GT3 1:32 Daytona 25
560004662€59.99
Scalextric Ford Mustang GT3 Dayt.25 Gradient brings the presence of a modern GT racer into 1:32 scale, pairing the long-hood Mustang profile with the Dayt.25 Gradient decoration named in the model title. The compact scale gives the car a clear place on home slot layouts, where close racing lines, overtaking attempts and repeated lap running stay easy to stage. The Ford Mustang GT3 format points to contemporary endurance-style competition, and this version focuses on the visual identity of the Daytona 25 themed livery rather than a generic road-car finish. In a 1:32 collection, that makes the car easy to place alongside other circuit racers while still standing apart through its specific graphics package. The 14 years age marking keeps the recommendation aligned with a more detail-led model format. As a slot car, it belongs in a track-powered setup rather than a battery-powered toy vehicle category, which keeps the emphasis on guided racing and layout compatibility. On the track, the low, wide GT3 stance reads clearly through bends and straights, helping the car stand out in head-to-head sessions or timed laps. Away from running, the named Ford Mustang GT3 Dayt.25 Gradient finish also suits display in a motorsport lineup where event-linked liveries and 1:32 scale consistency matter. Warning! Not suitable for children under 14 years.
Cars
Scalextric Ford Mustang GT3 Proton Qatar 2024
560004519€59.99
Scalextric Ford Mustang GT3 Proton Qatar 2024 brings a current GT3 race car into 1:32 slot car form, pairing the recognisable Ford Mustang GT3 silhouette with the Proton Qatar 2024 livery for a model that stands out as soon as it reaches the circuit. The named race version gives the car a clear motorsport identity rather than a generic road-car look. The 1:32 scale places it in the established slot racing format used across many home circuit layouts, so the proportions stay readable through corners, straights and side-by-side running. The Ford Mustang GT3 body shape carries the visual character of modern endurance and GT competition, while the Proton Qatar 2024 graphics tie the model to a specific racing entry from the 2024 season. With an age marking of 14 years and up, the focus stays on detailed collecting, track handling and repeat race sessions. On a home layout, the car suits grid starts, lap comparisons and paired racing where matching scale helps the field look consistent. It also fits neatly into a motorsport display between runs, especially alongside other contemporary GT entries in 1:32 format. Batteries are not included.
Cars
Scalextric Ford Mustang GT3 Slot Car 1:32
560004503€59.99
Scalextric Ford Mustang GT3 Multimatic MSP brings current endurance-racing style to 1:32 slot car action with the #64 Ford Performance livery, a low-slung GT3 silhouette and a track-ready guide format that sits neatly in the rails. The dark blue bodywork is broken up by white and red graphics, giving the car a strong race-day presence as it threads through curves and opens up on longer sections. The body captures key GT3 cues with a pronounced front splitter, wide fenders, hood vents, red mirror accents and a large rear wing, all working together to create the recognisable Mustang GT3 shape. Printed markings include Ford Performance branding, WeatherTech graphics, GTD PRO references and driver name strips, adding the layered detail expected from a modern race replica. Gold racing wheels add contrast against the darker livery, while the visible guide slot underneath places the car firmly in the slot-racing category rather than as a static model alone. The 1:32 scale also makes it a natural fit alongside other cars and circuit accessories in the same format. On a home circuit, the compact race-car proportions and clearly defined aero surfaces give each lap a focused competition look, whether the layout uses sweeping bends or tighter technical sections. Between runs, the same printed graphics, number panels and rear-end detailing give the car a strong shelf presence for motorsport collections built around GT racing and Ford competition machines.
Cars
Scalextric Ford Mustang Rassler Racing 1:32
560004537€59.99
Scalextric Ford Mustang Rassler Racing brings classic American muscle car character into the focused format of a 1:32 slot car. The Ford Mustang shape, paired with racing styling, gives each lap a strong visual identity on home circuits, whether the car is charging down a straight or threading through tighter turns. The 1:32 scale places this model within one of the most established slot racing formats, making it a natural fit for circuit collections built around the same proportion. Its compact racing form suits repeated lap running, close lane battles and shelf display between sessions. The 14 Years age marking is stated for this model, keeping the recommendation clear and aligned with the data provided. Batteries are not included. On the track, the Ford Mustang Rassler Racing stands out through its familiar silhouette and competition-led presentation, which helps make head-to-head runs easier to follow at speed. It also works well as part of a broader motorsport line-up, where different liveries, body shapes and eras create more varied race meetings across the same circuit layout.
Cars
Scalextric Ford Puma Rally1 MC 2023 Slot Car
560004501€75.99
Scalextric Ford Puma Rally1 MC 2023 brings current rally styling into 1:32 slot racing with a compact powered car that combines track action and display presence. The blue body, large rear wing and wide fenders give the silhouette the planted look of a modern Rally1 machine, while the white wheels and racing mirrors sharpen the competition-focused finish. Printed graphics across the bodyshell add another layer of realism, with Ford Performance branding joined by markings such as Red Bull, AsahiKASEI, Castrol, SafetyCulture, pulse, ASTON and Pirelli. Hood vents, the large front grille and the rear aero treatment shape a body that looks at home on contemporary rally stages and on a home circuit. The 1:32 scale keeps the car easy to handle, easy to store and simple to line up with other cars in the same format for mixed-grid racing or display. On the track, the guided slot format supports repeated laps, lane discipline and close side-by-side racing on compatible layouts. Between runs, the detailed rally bodywork and full race livery give the car a strong shelf presence, whether placed in a collection cabinet or kept beside the circuit for the next session. Age marking: 14 Years
Cars
Scalextric Ford Puma Rally1 Monte Carlo 2024
560004569€67.99
Scalextric Ford Puma Rally1 Monte Carlo 2024 translates a current rally contender into a 1:32 slot car with the sharp proportions, race graphics and visual intensity of the Monte Carlo entry. The bodywork carries the number 16, driver and co-driver names, and a dense spread of sponsor markings that give the model the look of a car prepared for a championship stage rather than a generic road version. The shell shows the aggressive details that define the Ford Puma Rally1, including hood vents, a deep front splitter, wide fenders and a large rear wing. White multi-spoke wheels, dark tinted windows and oversized FORD grille lettering add further contrast across the white, dark blue, red, yellow and orange livery. Red Bull graphics stretch across the side panels, while markings such as Castrol, Pirelli, safetyculture, M-SPORT PERFORMANCE and E CASINO MONTE-CARLO build the layered finish expected from a modern works rally car. On a home circuit, these visual details give each pass through a straight or corner a strong competition presence, and off the track the same decoration makes the car easy to place in a rally-focused collection. The 14 years marking suits hobby use where the appeal lies in the specific car, the event setting and the faithful race-day appearance.
Cars
Scalextric Ford Puma Rally1 Monte Carlo 2025
560004654€67.99
Scalextric Ford Puma Rally1 Monte Carlo 2025 brings modern WRC character into a 1:32 slot car format, combining the compact proportions of a home racing model with the unmistakable shape of Ford's current Rally1 contender. The Monte Carlo 2025 livery gives the car a clear event identity, so each lap carries the look of contemporary rally competition rather than a generic racing design. The 1:32 scale makes the model easy to place on established slot layouts while still leaving room for the body lines, graphics and stance that define the full-size car. Its rally theme adds a different visual note to grids built around circuit or road racing, and that contrast becomes especially strong when mixed with touring, GT or endurance entries. The Ford Puma Rally1 name also gives the model a direct link to current motorsport, which adds relevance for collectors who follow present-day championship cars. On the track, the compact format suits repeated lap sessions, close chases and line-up changes between different classes and liveries. Off the circuit, the Monte Carlo 2025 decoration gives the car enough presence for shelf display, whether placed as a single rally model or alongside other 1:32 releases from the same racing world. Warning! Not suitable for children under 14 years.
Cars
Scalextric Ford RS200 Pat Doran Car 1:32
560004667€59.99
Scalextric Ford RS200 Pat Doran brings a named competition car into 1:32 slot racing with the compact stance and visual identity that make this version easy to spot on the circuit. The model combines a recognisable Ford RS200 racing subject with a scale format widely used for home track layouts and collecting. Its 14 Years age marking places it within older hobby use, while the clearly stated Pat Doran version gives the car a specific motorsport identity instead of a generic livery. The 1:32 format also makes it a practical match for line-ups built around the same scale, whether the focus is close racing, grid displays or expanding a themed vehicle roster. As a battery-powered vehicle set accessory category entry, it sits naturally alongside established electric racing layouts. Batteries are not included. On a home circuit, the Ford RS200 Pat Doran model adds a distinct rally-cross presence to head-to-head runs, timed laps and display arrangements between sessions. It also suits collectors who want a clearly named Scalextric release that represents a specific car in a consistent 1:32 scale format.
Cars
Scalextric Ford Sierra RS500 YTCC Car 1:32
560004628€59.99
Scalextric Ford Sierra RS500 YTCC D.Brown 2024 brings a named touring car entry into 1:32 slot racing with the compact stance and recognisable silhouette that made the Sierra RS500 a standout shape on circuit grids. The 14 Years age marking places this release in a category suited to more considered handling on home layouts and hobby race setups. The YTCC D.Brown 2024 designation gives the car a specific competition identity rather than a generic racing finish, which helps the model stand out when placed alongside other touring cars in a collection. Its role as an electric car set accessory makes it a natural addition for expanding an existing Scalextric layout with another grid contender. The 1:32 scale keeps the proportions aligned with the format widely used for home slot racing, so the car sits naturally in mixed race line-ups and staged championship sessions. The Ford Sierra RS500 name also brings a well-known motorsport shape into a format built around repeated laps, close pairing and visible livery detail. On a home circuit, the model adds variety to head-to-head runs, timed laps and themed touring car grids. Between races, the D.Brown 2024 car also works as a clearly identified display piece that keeps its motorsport character visible even when it is off the track.
Model car kit
Scalextric Ford Sierra Sap. Cosworth 1:32 Car
560004607€67.99
Scalextric Ford Sierra Sap. Cosworth MC91 Del. brings a well-known touring car shape into 1:32 scale, combining a compact racing format with the visual character of the Sierra body. The model suits track layouts where close spacing, visible livery detail and quick car changes matter during repeated lap sessions. Within a powered vehicle collection, this car adds a specific Ford Sierra Sap. Cosworth variant rather than a generic racer. The 1:32 format makes it easy to place alongside other cars in the same scale for matched circuit use and consistent visual proportion across the layout. The MC91 Del. designation gives this release a distinct identity within a line-up, which helps when building grids with clearly differentiated cars. As an accessory in the electric and battery car set category, it is intended to extend an existing setup with another vehicle choice. Batteries are not included. On a home circuit, the compact scale supports side by side racing, lane changes and quick placement on the track before a session starts. Between runs, the detailed body also works well as a shelf display piece that keeps the motorsport look visible even when the controller is set aside.
Cars
Scalextric Ford Sierra Sapphire BTCC 1990 1:32
560004632€59.99
Scalextric Ford Sierra Sapphire BTCC 1990 1:32 brings a well-known touring car shape from the British Touring Car Championship onto the slot racing circuit. The Ford Sierra Sapphire saloon profile and Richard Gravett race identity give this model a clear period look that stands out in a field of late-1980s and early-1990s competition cars. The 1:32 format places the car in the core scale used across many home slot racing layouts, making it a natural fit for building a BTCC-inspired grid. The Sapphire body style differs from the more familiar hatchback Sierra shape, with its separate boot and longer roofline creating a distinct stance on the track. That difference matters in a racing line-up, where body style, livery and era all help shape the character of each heat. The 1990 BTCC setting also gives the car a specific motorsport reference rather than a generic road-going look. On a home circuit, this slot car suits close touring car racing, timed laps and era-based matchups with other 1:32 saloons. Between sessions, the Richard Gravett decoration and Ford Sierra Sapphire form also give it presence as part of a motorsport collection. Batteries are not included.
Cars
Scalextric Ford Transit MK1 Castrol 1:32
560004648€67.99
Scalextric Ford Transit MK1 Castrol captures the unmistakable shape of the classic van in 1:32 scale, bringing a familiar commercial vehicle silhouette into the fast rhythm of slot car racing. The Castrol decoration gives the model a competition-led look that reads clearly on the circuit and adds a strong period character when the van is parked between runs. The Ford Transit MK1 format stands apart from standard racing coupes and single-seaters, which gives this model a different visual balance in mixed grids and historic layouts. In a 1:32 collection, that shape adds variety through its taller roofline, longer side panels and instantly recognisable front end. The compact scale also makes it easy to place alongside other vehicles in the same format for shelf display or trackside staging. Recommended age: 14 years and up. On a home circuit, the Castrol finish stays easy to follow through bends and straights, while the Transit MK1 profile brings a fresh change of pace to race line-ups built around classic motorsport themes. Off the track, the same model works neatly as a display piece for collectors who enjoy road vehicles, service liveries and vintage van design in miniature form. Warning! Not suitable for children under 14 years.
Cars
Scalextric GMA T.50 Slot Car 1:32 Silver
560004568€47.99
The Scalextric GMA T.50 brings a modern supercar shape to 1:32 slot racing with a metallic silver finish, dark wheels and a low, flowing body that stands out the moment it enters the circuit. Its guided running format keeps the car tied to the slot, turning each lap into a clean visual line through chicanes, sweepers and long straights. The body captures the GMA T.50 with black lower trim, tinted windows and detailed front headlight treatment that sharpen the scale look at close range. The compact 1:32 format makes it easy to place into existing home track layouts, while the sleek proportions suit both racing sessions and static display between runs. The underside guide system is central to how the car works: it sits in the track slot and directs the front end through the course, so the route is determined by the circuit rather than free steering. 14 Years marks the recommended age. On a home layout, the silver finish stays easy to pick out as the car moves through corners and crosses lane sections. Parked in the paddock area or lined up on the start grid, the GMA T.50 adds a current road-car presence that contrasts neatly with classic GT and endurance shapes.
Cars
Scalextric Gordon Murray Design Gen Twin Pack
56004601A€134.99
The Scalextric Gordon Murray Design Gen Twin Pack brings a matched pair of 1:32 scale cars into one focused slot racing set. The Gordon Murray Design Gen name gives the pack a clear identity, while the twin format places 2 cars together for direct comparison on the track or a coordinated look in a collection. Within the Vehicles and Powered Vehicles category, this set sits in the electric and battery car accessories area, making it a natural addition to a wider slot racing layout. The 1:32 scale is a familiar format for collectors and racers who build lineups around consistent proportions, and the paired pack format keeps both cars visually related when placed on shelves, in display cases, or on a starting grid. Batteries are not included. The age marking is 14 Years. On race day, the twin pack suits side by side running on a compatible slot circuit, where matching scale helps create a balanced visual setup through straights and corners. Away from the track, the 2-car presentation also works well for display, gifting, or adding a named Gordon Murray Design Gen set to an established Scalextric collection.
Cars
Scalextric Holden VL Commodore HDT 1:32 Car
560004549€69.99
Scalextric Holden VL Commodore HDT brings the Spa 1987 touring racer into 1:32 scale with a compact slot car format and a body shape that carries the long, low stance of the full-size machine. The white finish, blue and red lower graphics, rear wing and front air intakes give the model a clear circuit-focused presence on track or on display. Printed Mobil livery, door number 3 and period sponsor markings place the car firmly in its race setting, while the cockpit detail adds another layer of realism through a visible roll cage and racing seat. Gold mesh wheels and side mirrors sharpen the exterior finish, and the guide blade under the front axle shows the working slot mechanism that keeps the car aligned through straights and bends. The 1:32 scale suits established home racing layouts and also gives collectors a familiar display format for touring car subjects. Set on a compatible slot circuit, the Holden reads clearly through corners thanks to its distinct body lines and race graphics. Off the track, the same detailing makes it easy to place alongside other motorsport replicas from the late 1980s, where the Spa event identity and HDT styling remain the focus.
Cars
Scalextric Honda Civic Type R BTCC22 #66 1:32
560004409€69.99
Scalextric Honda Civic Type R BTCC22 #66 brings current touring car character to a 1:32 slot racing format, with a detailed body shell that captures the sharp nose, broad stance and competition-focused shape of the BTCC machine. The matte black finish, gold graphics and blue accents give the car a striking presence as it lines up on the grid or threads through a home circuit. The body carries race-specific features that define this version, including a large rear wing, pronounced front splitter, widened fenders and side skirts. Sponsor markings such as ADRIAN FLUX, RICH ENERGY, Kwik Fit, RAVENOL and Goodyear add the visual density expected from a contemporary touring car. The #66 numbering and Cook name on the side window tie the livery to its on-track identity, while black multi-spoke wheels and low-profile tyres complete the competition look. A roof antenna adds another small motorsport detail that helps the model read clearly as a modern BTCC racer. On a slot layout, the low, planted shape suits close racing scenes with barriers, pit buildings and tight bends, while off the track the same livery and bodywork give the car a strong display presence in a 1:32 collection. Age marking: 14 Years+
Cars
Scalextric HUE166 1:32 Land Rover Series 1
560004600€67.99
Scalextric HUE166 brings the Land Rover Series 1 into a 1:32 format that fits neatly into slot racing collections and classic vehicle displays. The HUE166 name ties this release to a specific Land Rover identity, giving the model a recognisable reference point before it even reaches the track. The Series 1 shape carries the upright proportions and functional lines associated with the early Land Rover, which gives this model a very different presence from low-slung racing cars in the same scale. That contrast can add variety to a mixed 1:32 lineup, whether the focus is British motoring history, utility vehicles, or unusual trackside scenes. The 14 Years age marking places it in a category suited to older fans and collectors. Batteries are not included. On a home circuit, the compact 1:32 size makes the model easy to integrate with existing layouts, while the HUE166 reference gives it a clear identity in a garage scene, paddock setup, or display cabinet. It also works as a distinctive addition alongside period cars, support vehicles, and other heritage-inspired releases from the same scale class.
Cars
Scalextric James Bond Aston Martin DB5 1:32
56004550A€85.00
Scalextric James Bond Aston Martin DB5 captures the Goldfinger 60th Anniversary theme in a 1:32 slot car with a metallic gold finish, classic coupe proportions and the unmistakable presence of one of cinema's most recognisable grand tourers. The reflective bodywork, large grille and round headlight treatment give the model a strong period look whether it is running on a home circuit or parked in a display line-up. Closer details build that character further. Side vents, a hood scoop, fender-mounted mirrors and wire-spoke wheels echo the styling cues associated with the Aston Martin DB5, while clear windows open a view into the interior instead of closing the cabin off with dark glazing. The BMT 216A markings add another recognisable reference from the Goldfinger presentation. At 1:32 scale, the car fits naturally into established slot racing collections and themed James Bond displays, with proportions that work equally well for close viewing and circuit use. Age 14 Years and up is stated for this model. On the track, the low classic body shape and bright gold finish make the car easy to pick out through corners and straights. Off the circuit, the same combination of anniversary theme, vintage detailing and polished presentation gives the model a strong place in film-inspired collections.
Cars
Scalextric JB AMC Hornet The Golden Gun 1:32
560004524€75.99
Scalextric JB AMC Hornet The Golden Gun brings a classic American coupe into 1:32 scale with a compact slot car format and a strong screen-linked identity. The red body, white side stripes and silver trim create a period look that reads clearly at speed and still holds up in close viewing on a shelf or layout. The 2-door fastback profile gives the car its distinctive silhouette, while the vertical-slat grille, round headlights and black bumper guards sharpen the front end with recognisable AMC Hornet character. Silver window trim, black side mirrors, windshield wipers and the hood emblem add smaller exterior touches that keep the body shell visually busy without losing the clean lines of the original car. Dark wheels with whitewall-style tyres complete the contrast against the bright body colour and reinforce the retro road-car feel suggested by the source design. On a home circuit, the 1:32 scale makes the car easy to pair with other vehicles in the same format for film-themed grids, classic street scenes or mixed-era racing line-ups. On display, the red finish, side graphics and chrome-look detailing give the model enough presence for a cabinet, desk or collector arrangement centred on iconic cars from screen history.
Cars
Scalextric JB Checker Taxi Cab 1:32 Vehicle
560004606€67.99
Scalextric JB Checker Taxi Cab brings the Checker Taxi Cab from Live An.Let Die into a 1:32 format that suits both track collections and display-focused layouts. The compact scale gives the vehicle a familiar road-car presence, with the classic taxi cab silhouette standing apart from standard racing shapes in a line-up. Within the Vehicles and Powered Vehicles category, this model sits as an electric or battery car set accessory, making it a natural addition to an existing slot car collection built around film references and recognisable road vehicles. The Live An.Let Die designation ties the car to a specific on-screen source, which gives themed layouts a stronger visual identity than a generic taxi cab alone. The 1:32 proportion also works well for close scene building, where street traffic, pursuit setups, and city-inspired arrangements benefit from a vehicle with a distinct body style. Batteries are not included. On a home circuit, in a display cabinet, or as part of a James Bond vehicle line-up, the Scalextric JB Checker Taxi Cab adds a different note from pure competition cars. The combination of film reference, taxi cab form, and 1:32 scale makes it easy to place in cinematic track scenes or collector displays with a clear visual story. Warning! Not suitable for children under 14 years.
Cars
Scalextric JB Lotus Esprit Turbo 1:32 Car
560004631€67.99
Scalextric JB Lotus Esprit Turbo brings the sharp wedge profile of the Lotus Esprit Turbo into a 1:32 slot car format that reads clearly on the track and on display. The White For Your Eyes Only designation gives this version a specific identity, linking the model to a well-known screen-era appearance rather than a generic road car finish. Within a powered vehicle range, the compact 1:32 scale makes it easy to place alongside other cars in the same format while keeping the proportions consistent across a collection. The Lotus Esprit Turbo shape is defined by its low nose, straight body lines and crisp sports car silhouette, details that give the car a strong visual presence in lane-based racing. This release is listed as an accessory within electric and battery car sets, so it fits naturally into an existing setup where different cars can be rotated for varied race line-ups. The 14 Years marking is stated in the data for this model. On a home circuit, the named livery helps the car stay easy to spot through bends, straights and side-by-side runs. Away from the track, the same 1:32 format suits shelf display with other motorsport and film-linked vehicles from the Scalextric range. Warning! Not suitable for children under 14 years.
Cars
Scalextric John Wick Ford Mustang BOSS 429 1:32
560004497€75.99
Scalextric John Wick Ford Mustang BOSS 429 brings a cinematic muscle-car presence to the slot racing circuit in 1:32 scale. The long fastback silhouette, hood scoop and bold front end give the model a strong late-1960s character, while the illuminated headlights sharpen the look as the car charges through darker room setups and evening race scenes. The body finish focuses on recognisable screen-inspired details rather than a generic racer shape. Black bonnet stripes, side graphics, a front splitter, rear spoiler and the BOSS 429 marking work together to define the car's identity from multiple angles on the track. Round headlamp detailing, grille treatment, windshield wipers and deep-dish wheels add further visual texture, so the model still reads clearly when viewed up close between sessions. The treaded tyres support the purposeful muscle-car stance and suit the dramatic, action-led look associated with the John Wick name. On a home layout, this car suits chase-style racing, night-run setups and side-by-side duels where the headlights and dark body accents stand out against the circuit. Between races, the same detailing gives the model a strong shelf presence for collectors who enjoy film cars and classic American performance icons in compact slot format.
Model car kit
Scalextric John Wick Plymouth Barracuda 1:32
560004595€67.99
Scalextric John Wick Plymouth Barracuda Chap.4 brings the film car into a 1:32 slot car format with the compact proportions and lane-based action that define home circuit racing. The Plymouth Barracuda styling from John Wick Chapter 4 gives each run a recognisable screen presence while the guided format keeps the focus on clean lines, throttle control and repeatable lap timing. The 1:32 scale makes this model a natural fit for collectors of film vehicles and for racing sessions where several cars share the same layout footprint. Its place in the Electric/Battery Car Sets/Accessories category points to circuit-based use rather than free driving, so the handling experience centres on the slot, the rails and the rhythm of corner-to-corner running. The 14 Years marking is stated in the product data. Batteries are not included. On a home track, the John Wick Plymouth Barracuda Chap.4 suits short sprint races, side-by-side comparisons with other 1:32 cars and display between sessions. The film-linked body theme gives the car a strong identity on the grid, while the scaled format keeps storage, setup and repeated running easy to manage across regular race nights.
Cars
Scalextric Ken Miles Triple Pack 1:32 Set
56004619A€194.99
Scalextric Ken Miles Triple Pack brings the Ken Miles name into a 1:32 scale racing set with 3 matching vehicles gathered in one box. The compact scale gives each car a familiar slot racing footprint, making the set easy to place on existing 1:32 layouts or arrange as a focused motorsport display. The triple pack format adds more than a single-car presentation by grouping 3 related models around one theme. That creates a stronger visual line on track sections, pit lane scenes or shelf displays, while the shared 1:32 scale keeps proportions consistent across a wider collection. The product data states an age marking of 14 Years, placing this set in a hobby-oriented range. The Ken Miles designation gives the pack a clear identity for collectors who follow historic racing names and themed releases. On a home circuit, the 1:32 format suits side-by-side placement with other same-scale cars and helps build a coherent race scene. Off the track, the 3-car grouping works well for cabinet display, themed arrangements and collection building centred on Scalextric and Ken Miles. Warning! Not suitable for children under 14 years.
Cars
Scalextric Lamborghini Revuelto Slot Car 1:32
560004523€61.99
Scalextric Lamborghini Revuelto Slot Car 1:32 captures the sharp, low silhouette of the Revuelto in Arancio Apodis and places it straight onto the slot racing lane. The guide rail beneath the chassis sets the car into the track, creating a clean visual of a modern supercar leaning into bends with black intakes, dark glazing and a compact racing stance. Across the body, the model carries recognisable Revuelto cues including the slim rear light graphics, black rear diffuser detailing, hexagonal centre exhaust elements and Revuelto script on the side and rear. The top view highlights the sculpted roof, tinted windscreen and black rear engine cover area, which add contrast to the orange finish and strengthen the car's road-car identity in miniature. Large black multi-spoke wheels sit neatly under the angular arches, while the front splitter and side intake shapes give the shell a taut, technical look suited to contemporary Lamborghini styling. On a home circuit, the 1:32 format fits naturally into established slot racing layouts and brings a distinct supercar profile into head-to-head sessions. Between races, the same body details and vivid colour make the car easy to place in a display line with other modern performance models. 14 Years+
Cars
Scalextric Land Rover Ser.1 Shaun the Sheep 1:32
560004543€75.99
Scalextric Land Rover Ser.1 Shaun the Sheep brings a classic utility vehicle shape into 1:32 slot racing with a body finished in blue and yellow and covered in Shaun the Sheep character graphics. The guided underbody is built for rail-compatible track use, so the model holds its line through circuits while the upright Land Rover profile gives it a very different look from low racing cars. Across the body, the Shaun the Sheep logos appear on the front panels, while the side sections and windows carry sheep faces and scene artwork that turn the model into a clearly themed edition. Visual details such as the black bumper, silver front grille, round headlights, side mirrors and red wheel rims sharpen the scale look. The rugged tyre style reinforces the off-road character of the Land Rover Ser.1 shape, even within the compact slot car format. Batteries are not included. On a home track, the shorter 1:32 size suits layouts with frequent bends, lane changes and close side-by-side running. Between races, the same decorated body gives the model a strong shelf presence, with the Shaun the Sheep theme visible from the front, sides and window area. Recommended age: 14 years and up.
Cars
Scalextric Land Rover Series 1 RAF Car 1:32
560004661€67.99
Scalextric Land Rover Series 1 Royal Air Force brings the upright stance and unmistakable shape of the early Land Rover into 1:32 slot car form. The Royal Air Force livery gives this model a clear period identity, so it reads differently on the circuit from streamlined saloons, GT racers and modern competition cars. The Series 1 body style introduces a classic utility vehicle profile that changes the visual rhythm of a home racing layout. In a collection, the model adds a heritage-focused subject with recognisable Land Rover proportions and RAF decoration. On track, the 1:32 format lets it sit naturally alongside other cars in the same scale, making it easy to build mixed grids with historic, road-going or service-themed vehicles. The compact scale also suits shelf display, where the squared bodywork and military-inspired finish remain easy to spot at a glance. Ages 14 Years and up are stated for this model. Whether placed into a themed vehicle lineup, used to broaden a slot racing roster, or set into a period-inspired scene, this Scalextric release adds a distinct Land Rover presence with a strong Royal Air Force look. Warning! Not suitable for children under 14 years.
Cars
Scalextric Lotus 79 #5 Andretti 1978 Slot Car
560004494€75.99
Scalextric Lotus 79 #5 Andretti 1978 brings the shape of a World Champion Formula 1 car into 1:32 slot racing with a black and gold livery, open cockpit and the low, winged profile that defined its era. Set on the rails, the car combines historic motorsport character with the focused feel of a single-seater built for fast circuit running. The bodywork carries period markings such as John Player Special, OLYMPUS CAMERAS and Valvoline, with the number 5 placed into the race layout seen across the nose, side and rear sections. A silver driver helmet with red striping sits in the cockpit, adding a clear focal point when the car is viewed from above or from the side of the track. The front wing, rear wing, sidepods and exposed wheel layout give the model the unmistakable proportions of a late 1970s Grand Prix machine. Close-up views also reveal details around the rear section, where the wing, engine area and upper body surfaces add extra visual depth. On a home circuit, the 1:32 scale suits close racing, lane changes and repeated laps where the long, low silhouette stays easy to read through bends and straights. The same detailing also gives the car a strong shelf presence between sessions, especially when the black finish, gold pinstriping and race graphics are seen from a side or top angle. Warning! Not suitable for children under 14 years.
Cars
Scalextric Lotus 98T Ayrton Senna Car 1:32
560004529€79.99
Scalextric Lotus 98T Ayrton Senna captures a landmark Formula 1 design in 1:32 scale, pairing the black and gold bodywork with a bright yellow helmet for an instantly recognisable racing silhouette. The open cockpit, low nose and winged profile give this single-seater the sharp visual character associated with mid-1980s Grand Prix machinery. The Lotus 98T layout is defined by its exposed wheels, slim central body and separate front and rear aero elements, all of which shape the car's unmistakable stance. Sponsor markings such as John Player Special, Renault ELF, DeLonghi and Goodyear build the period look across the bodywork and connect the model closely to the full-size racer. Car number 12 adds another specific reference point, while the visible suspension arms and slick tyre setup reinforce the technical look of a classic Formula 1 car. The 1:32 format also makes the proportions easy to compare alongside other cars in the same scale. On a home circuit, in a display cabinet or as part of a motorsport collection, this racing car brings a clear Ayrton Senna connection and a strong historic identity. The detailed livery and recognisable Formula 1 shape give each viewing angle something distinct to pick out, from the nose and wings to the cockpit and rear section.
Cars
Scalextric Mazda RX7 FD 1:32 Japanese Police
560004681€59.99
Scalextric Mazda RX7 FD brings the shape of the Japanese sports car into a 1:32 slot car format with Japanese Police livery that reads clearly both on the circuit and on display. The low, recognisable RX7 FD profile gives the model a strong road-car identity while the marked police finish adds a striking visual contrast during fast laps. This version is recommended from 14 years and centres its appeal on the exact car theme named in the designation rather than on generic racing decoration. The 1:32 scale makes the proportions easy to combine with other cars, track sections and scenery built around the same format. Japanese Police markings give the body a defined visual signature, which helps the car remain easy to pick out through bends and on straights. As a Mazda RX7 FD model, it also brings a real-car reference that collectors often look for when building a themed line-up. On a home circuit, the compact 1:32 size suits repeated running sessions where several cars share the same layout. Away from the track, the Japanese Police finish and RX7 FD body shape give the car a clear place in a display row focused on road cars, tuner icons or police-themed models.
Model car kit
Scalextric Mazda RX7 FD 1:32 Nurburgring 24
560004626€59.99
Scalextric Mazda RX7 FD 1:32 Nurburgring 24 2007 brings a specific endurance-racing reference onto the track with the shape and identity of the Mazda RX7 FD. The 1:32 scale gives the car a familiar slot racing footprint that sits naturally into home circuits, display rows, and mixed grids built around the same format. The named Nurburgring 24 2007 version gives this release a clear motorsport setting rather than a generic racing theme. That event link helps the car stand out in a line-up built around touring, GT, or endurance subjects, while the RX7 FD designation keeps the model tied to a recognisable Mazda performance icon. The product data also marks the car for 14 Years, which places it within older hobby and collecting use. As a powered vehicle in the Scalextric range, it suits track sessions where race-specific liveries and real-event references shape the field as much as lap times do. Set on a 1:32 circuit, the Mazda RX7 FD adds variety to head-to-head running, themed endurance grids, or marque-focused collections. It also works as a display piece between races, where the Nurburgring 24 2007 identity and the RX7 FD silhouette keep the model visually tied to a real competition entry.
Cars
Scalextric Mazda RX7 FD Bathurst 1994 1:32
560004652€59.99
Scalextric Mazda RX7 FD Bathurst 1994 brings a famous racing name into 1:32 slot car form, combining the low, purposeful shape of the RX7 FD with a motorsport theme drawn from the 1994 Bathurst event. The compact scale suits home circuit layouts where quick lap sessions, close lane running and line-up variety matter as much as the car itself. The model is listed in the powered vehicles category and carries the exact Mazda RX7 FD Bathurst 1994 designation, which gives it clear collector relevance alongside its track role. The 1:32 scale makes it easy to integrate with similarly sized racing layouts and display arrangements, while the Bathurst reference adds a specific competition context rather than a generic road-car look. Its appeal sits in that balance between recognisable vehicle identity and circuit use, with the RX7 FD silhouette standing out in mixed racing grids. On a home slot layout, the car adds period racing character to head-to-head sessions and themed collections alike. Ages 14 years and up are stated for this model, making it suited to older fans building a line-up around named race cars, marques and event liveries.
Model car kit
Scalextric Mercedes-AMG GT3 1:32 Race Car
560004623€59.99
Scalextric Mercedes-AMG GT3 1:32 Race Car brings the British GT24 2Seas race theme into a compact format shaped for slot car collections and circuit use. The 1:32 scale gives the model a familiar proportion for home racing layouts, while the Mercedes-AMG GT3 designation places it firmly in modern GT competition. The data identifies this release as a powered vehicle accessory and states an age marking of 14 Years. That makes it suitable for ranges and layouts built around older racing fans, collectors, and hobby use where model identity matters as much as track action. The British GT24 2Seas naming adds a specific event and team reference, giving the car a more defined place in a motorsport line-up than a generic GT racer. Its compact scale also makes it easy to combine with other 1:32 vehicles in the same category where consistent proportions matter across the grid. On a home circuit, the model adds a current GT3 silhouette to race sessions, and off the track it works as a clearly identified motorsport piece for shelves, cabinets, or themed collections. For collectors comparing liveries, teams, and race entries, the exact Scalextric naming helps keep the model easy to place within a broader 1:32 racing range.
Cars
Scalextric Mini Cooper F56 B. Gravett 2024
560004410€59.99
Scalextric Mini Cooper F56 B. Gravett 2024 places a current Mini racing shape into 1:32 slot car form, combining the compact stance of the F56 with a named 2024 livery that stands out as it threads through corners and charges along the straight. The model suits layouts where close visual detail and clear race identity matter as much as lap times. The Mini Cooper body gives this release a recognisable silhouette, while the B. Gravett 2024 decoration adds a specific competition reference rather than a generic colour scheme. In 1:32 scale, the car sits naturally alongside other circuit racers in the same format, making it easy to build a grid with consistent proportions. The slot car format also keeps the action focused on lane discipline, throttle control and clean overtakes, which gives each session a more deliberate racing rhythm. Minimum age 14 years is stated for this model. On a home track, the compact F56 profile reads clearly through chicanes, sweepers and start-finish sections, so each pass remains easy to follow from lane to lane. Between races, the same body shape and driver-specific livery also give the car a strong shelf presence within a motorsport lineup.
Cars
Scalextric Mini Miglia Endaf Owens 1:32 Car
560004635€59.99
Scalextric Mini Miglia Endaf Owens brings the compact look of Mini Miglia racing into a 1:32 slot car format that sits naturally on home circuit layouts. The named Endaf Owens livery gives this release a specific competition identity, so the car reads as more than a generic saloon when lined up on the grid or placed in a collection. The 1:32 scale makes the model easy to integrate with other cars in the same format, whether the focus is close lap running, building a themed race field, or comparing body styles from different eras of circuit racing. Its placement in Vehicles and Powered Vehicles points clearly to track use, with the car intended for powered racing layouts rather than shelf-only presentation. The ShortDescription repeats the exact Mini Miglia Endaf Owens designation, which helps keep the model reference consistent across collecting, cataloguing, and race-day setup. Batteries are not included. On a home layout, the compact Mini silhouette stands out in tight racing groups and adds variety to mixed saloon grids. The 14 Years age marking keeps the recommendation explicit while the named racing subject and 1:32 format support collecting, organising, and repeated circuit sessions. Warning! Not suitable for children under 14 years.
Cars
Scalextric Mirage GR8 LeMans 1976 Slot Car 1:32
560004527€79.99
Scalextric Mirage GR8 LeMans 1976 captures the shape and livery of the #10 endurance racer in 1:32 scale, bringing a classic long-tail competition silhouette onto the track. The white bodywork, bright yellow lower sections and orange stripe create a sharp period look that stands out immediately when the car lines up for a run. The body features enclosed front wheels, a low nose and a large rear wing, all of which define the visual language of 1970s endurance racing. An open cockpit with a seated driver figure and blue visor helmet adds another layer of detail at close range. Printed sponsor-style markings, side roundels and the black number 10 extend the race-day finish across the body, giving the model a faithful motorsport character from front to rear. The compact 1:32 format also suits collectors who build grids around specific eras, liveries and famous race entries. On a home circuit, the Mirage GR8 LeMans 1976 adds a distinct vintage prototype shape beside GT and touring entries, while on a shelf the rear wing, low stance and bright colour blocking keep the car visually clear from every angle. Age 14+ is stated for this model.
Cars
Scalextric Mirage GR8 LeMans 1977 Slot Car 1:32
560004444€79.99
Scalextric Mirage GR8 LeMans 1977 captures the shape of a classic endurance racer in 1:32 scale, pairing a low aerodynamic body with a large rear wing and the vivid number 10 race livery. On the track rails or at rest on a shelf, the long, flat profile and bright blue, white, red, orange and yellow finish give this slot car a strong 1970s motorsport presence. The bodywork carries a dense set of period markings, with Renault, GITANES, elf, JCB, MOTOROLA, CIBIE, GOODYEAR, BARRETT'S CLASSIC CLOTHES and CAMPBELL placed across the car exactly where the eye expects them on a Le Mans machine. Blue-tinted headlight covers and the yellow roof air intake add contrast to the nose and cockpit area, while the silver wheels underline the race-ready stance. Inside the cockpit, a driver figure with a gold helmet adds a human focal point that strengthens the replica character without distracting from the body lines. This 1:32 model fits naturally into home slot racing sessions, where the long-tail endurance design stands out through bends and straights, and it also suits collectors who want a clearly recognisable Le Mans entry from 1977. Age 14 Years. Batteries are not included.
Cars
Scalextric Mr Bean Mini 1:32 DIY HD Car
560004334€67.99
Scalextric Mr Bean Mini 1:32 Do-It-Yourself HD brings a familiar screen car into slot racing form with a clearly stated 1:32 scale and a 14 Years age marking in the product data. The compact Mini shape and the Mr Bean name give this release a strong visual identity on track sections, pit scenes and collection shelves. Within the Vehicles and Powered Vehicles hierarchy, this model is positioned under Electric/Battery Car Sets/Accessories, which places it firmly in the world of powered racing systems. The Do-It-Yourself HD designation is part of the stated name and gives this version its own distinct identity within the range. The 1:32 format is a widely recognised slot car scale, making it a practical match point when planning layouts, building themed scenes or grouping cars by scale. The stated data does not list batteries as included. Set into a home circuit, the Mr Bean Mini adds a character-led look to race sessions and display stretches alike. Parked beside other 1:32 vehicles or placed on a shelf between runs, it carries the same recognisable name and compact profile that make this model easy to spot in a collection.
Cars
Scalextric Plymouth Barracuda Slot Car 1:32
560004525€69.99
The Scalextric Plymouth Barracuda slot car captures the look of a classic American race machine in 1:32 scale, pairing a broad-shouldered body with Spa Classic 2023 livery and bold number markings. White, red and blue panels, a black hood section and gold accent lines give the car a striking presence as it sweeps through bends and charges down the straight. Details across the shell build a convincing competition character. A hood scoop rises from the bonnet, side exhaust pipes run below the doors, and a black rear spoiler finishes the tail with a track-focused shape. Clear windows open the view into the cockpit, where a white roll cage and a driver figure with red helmet add another layer of realism. Printed names, sponsor graphics and Plymouth lettering complete the period racing look with crisp visual contrast across the body. Set on slot rails, the model brings its vintage muscle-car profile into fast circuit sessions, where the low, long shape and slick-tyre look suit close racing with other 1:32 cars. Between runs, the same detailed livery, large door numbers and visible interior parts give the Barracuda a strong display presence on a shelf or in a collection.
Cars
Scalextric Porsche 911 3.0 RSR GT1975LM 1:32
560004594€59.99
Scalextric Porsche 911 3.0 RSR G.L.R. GT1975LM brings the unmistakable shape of a 1975 endurance racer into a 1:32 slot car format, combining classic Porsche lines with the focused presence that suits both active circuit running and shelf display. The low roofline, broad rear arches and compact proportions give this model a strong visual identity as it threads through bends and lines up on the grid. The 1:32 scale makes it a natural fit for established slot car layouts and for collections built around historic motorsport subjects. Its GT1975LM designation ties the car to a specific racing reference rather than a generic sports coupe theme, which gives the model a clearer place in period race scenes. The G.L.R. marking adds another layer of event-style character to the body presentation. With an age marking of 14 Years+, the model sits comfortably in hobby-focused use where detail, theme and recognisable vehicle history matter alongside running action. On a home circuit, the Porsche 911 3.0 RSR shape brings variety to mixed grids of touring, GT and endurance cars, while the compact 1:32 format keeps storage and layout planning straightforward. Between sessions, the same body shape and race identity make it easy to place in a display cabinet, on a desk or alongside other classic Le Mans-inspired models.
Model car kit
Scalextric Porsche 911 GT3 R ACI MSP 1:32
560004522€69.99
Scalextric Porsche 911 GT3 R ACI MSP #16 HD brings modern GT racing character into the 1:32 slot car format, pairing the familiar Porsche 911 GT3 R shape with a named ACI MSP race identity. The compact scale suits home circuit layouts where repeated laps, lane changes and close visual comparison between different cars are part of the appeal. The #16 HD decoration gives this version a clearly defined place within a broader motorsport lineup, making it more than a generic GT racer. In a 1:32 collection, the proportions work well with matching circuit scenery, pit buildings and other slot cars from the same scale. The Porsche body shape adds a low, purposeful profile that reads clearly both in motion and at rest. Minimum age is 14 Years, so the age marking stays aligned with the intended use stated in the data. On track, this model suits short sprint sessions, repeated timed laps and side by side running with other 1:32 cars on compatible slot layouts. Away from the circuit, the named Porsche 911 GT3 R ACI MSP #16 HD also fits neatly into display rows where race number, team identity and scale consistency matter just as much as the driving session itself.
Cars
Scalextric Porsche 963 1:32 Le Mans 2024
560004593€59.99
Scalextric Porsche 963 brings the shape and identity of a current Le Mans Hypercar into 1:32 scale, based on the 2024 24hrs LeMans car that finished 4th. The low, wide prototype form and exact race reference give this slot car a clear place in modern endurance racing line-ups. The named Porsche 963 designation ties the model to one of the most recognisable cars in contemporary long-distance competition, while the 1:32 format keeps it aligned with established Scalextric circuit collections. The 2024 event link adds season-specific context rather than a generic racing theme, and the 4th-place finish connects the car to a documented result from the Le Mans field. With the age marking set at 14 Years, the focus stays on hobby use, collecting, and track sessions built around real motorsport subjects. On a home circuit, the car fits naturally into endurance grids, modern prototype matchups, or event-based race nights centred on Le Mans entries. Off the track, the combination of Porsche 963 naming, 2024 race identity, and 4th-place finish gives the model a strong display presence within a contemporary motorsport collection. Warning! Not suitable for children under 14 years.
Cars
Scalextric Porsche 963 Proton Competition 1:32
560004633€59.99
Scalextric Porsche 963 Proton Competition brings the shape of a modern endurance racer into 1:32 scale, turning the named Porsche 963 into a compact slot car with a low profile and a circuit-ready stance. The 14 Years age marking is stated in the product data, and the model sits in the powered vehicles area of electric and battery car sets and accessories. The Porsche 963 Proton Competition designation gives this release a specific racing identity rather than a generic sports car look. In 1:32 scale, the proportions stay easy to read on the track, so the body lines, cockpit shape, and long-tail racing form remain visible through corners and on straights. The compact scale also works well for home circuit layouts where several cars share the same lane spacing and visual rhythm. Batteries are not included according to the product data. Placed on a slot racing circuit, the model suits repeated lap sessions, standing starts, and close chases through linked bends. It also works as a display piece between runs, with the Porsche 963 Proton Competition name and endurance-racing silhouette giving the car a clear motorsport character even when stationary. Warning! Not suitable for children under 14 years.
Cars
Scalextric Rover SD1 1:32 Bathurst 1984 Car
560004535€69.99
Scalextric Rover SD1 brings the Bathurst 1000 1984 #60 race car into a 1:32 slot racing format, combining a recognisable touring car shape with track-ready appeal. The proportions of the Rover SD1 and the period race livery create a model that reads clearly at speed and still holds its character when placed on a shelf between sessions. The Bathurst 1000 setting gives this car a specific motorsport reference rather than a generic racing theme, and the #60 markings tie the model to that event identity. In a 1:32 collection, that makes it easy to pair with other circuit cars from the same era or to build a grid with a stronger historical feel. The closed-roof Rover silhouette adds a different visual note from open-wheel or modern GT subjects, which helps the car stand apart in mixed line-ups. Minimum age 14 Years is stated for this model. On a home slot layout, the compact 1:32 scale suits regular running sessions where several cars rotate through the same circuit. Between races, the Bathurst 1984 decoration and Rover SD1 shape also give the car a clear place in a display focused on touring car history and classic event liveries.
Cars
Scalextric Rover SD1 BTCC 1984 A. Rouse 1:32
560004634€59.99
Scalextric Rover SD1 BTCC 1984 A. Rouse brings a clear touring car identity to the track in 1:32 scale, combining the long, distinctive Rover SD1 shape with a named 1984 BTCC racing reference. The compact format suits home slot layouts where closely spaced corners, lane changes and short straights keep every lap visually busy. The A. Rouse designation gives this model a specific motorsport link rather than a generic racing theme, which helps it stand out in a grid built around real championship cars. Its 1:32 scale also makes it easy to place alongside other cars in the same format for period-correct race scenes, display rows or head-to-head running sessions. The body style of the Rover SD1 adds a different silhouette from lower, later touring cars, bringing extra variety to mixed collections and classic circuit line-ups. With 14 Years stated in the product data, the model sits comfortably in hobby-led use where track setup, car selection and race pairing are part of the appeal. On a living room circuit, club-style home layout or dedicated slot racing table, the Rover SD1 can take its place in a classic BTCC field and give each heat a more era-specific look. Between races, the same model also works well as a display piece that keeps the 1984 A. Rouse connection visible beyond the track.
Cars
Scalextric Rover SD1 Soper BTTC 1983 1:32
560004534€69.99
Scalextric Rover SD1 Soper BTTC 1983 #4 HD brings a named touring car entry into a compact 1:32 slot racing format, combining the long, low shape of the Rover SD1 with the visual character of a 1983 BTTC machine. The powered layout turns that race identity into active circuit running, where the car's proportions and livery read clearly as it moves through bends and down the straight. The ShortDescription identifies this release as #4 HD, giving the model a specific competition reference rather than a generic road-car finish. Its 1:32 scale makes it easy to place with other cars in the same format for matched racing sessions or a consistent display line. The 14 Years age marking is stated in the product data and sits alongside the more detailed, collector-led presentation of the car. As part of the Vehicles and Powered Vehicles hierarchy, the model is positioned for track use rather than static shelf presence alone. On a home circuit, the powered slot format supports repeated laps, side-by-side pacing, and close attention to the car's line through corners. Between running sessions, the Rover SD1 shape, #4 markings, and BTTC 1983 reference give the model a strong period motorsport presence in a collection built around touring cars and British racing themes.
Cars
Scalextric Shelby Cobra 289 Slot Car 1:32
560004528€69.99
Scalextric Shelby Cobra 289 brings the compact, muscular lines of the #32 race car into a 1:32 slot racing format that reads clearly the moment it enters the circuit. The red finish and numbered livery give the car a strong period racing identity, whether it is threading through a tight infield section or waiting on the grid beside other cars in the same scale. Its slot car format makes the focus very specific: guided circuit running, repeatable lap sessions and close visual comparison with other 1:32 vehicles. The Shelby Cobra 289 shape suits layouts where quick direction changes, short straights and visible corner entries matter, because the low, compact silhouette stays easy to follow around the track. The #32 markings add a recognisable race-day look that helps the car stand apart during multi-car sessions. The 14 Years age marking states the recommended age exactly as supplied. On a home layout, this model suits timed laps, side-by-side racing and display between sessions without needing to change scale or theme. Placed on the start line, in a paddock scene or on a shelf beside other circuit cars, the red Shelby Cobra 289 keeps its motorsport character visible even when the power is off.
Cars
Scalextric Shelby GT350 Gulf Edition Slot Car
560004570€59.99
Scalextric Shelby GT350 Gulf Edition brings classic American racing style to the slot track in 1:32 scale, combining the long-hood coupe shape with Gulf blue paint, an orange centre stripe and race number 21 for a look rooted in period competition. The body captures the stance of the Shelby GT350 with a black grille, round headlights and a pronounced hood scoop that reads clearly at speed and in display cabinets. Closer details add depth beyond the first glance. Sponsor markings on the sides reinforce the race-prepared finish, while black racing wheels and wide tyres sharpen the competition look. Through the side window, the interior shows a stripped, track-focused layout with roll-cage-style detailing that suits the car's motorsport theme. The compact 1:32 format works well for shelf display, grid scenes and mixed-car racing line-ups where consistent scale matters. On a home circuit, the low, purposeful silhouette stays easy to pick out through bends and on straights, and the bold Gulf colours remain readable during fast laps. Between races, the same livery and body details give the model a strong presence in a collection of classic touring and GT machinery. 14 Years is stated in the product data.
Cars
Scalextric Shelby GT350H Car 1:32 Red Gold
560004658€59.99
Scalextric Shelby GT350H Car 1:32 Red Gold brings the long-bonnet shape of a classic muscle car into a compact slot racing format, with a red body and gold detailing that stand out clearly as the car moves through bends and straights. The 1:32 scale keeps the model aligned with a widely used slot car format, making it easy to place within an existing racing set-up or a display line of similarly scaled cars. The Shelby GT350H name gives this release a distinct road-car identity, with visual cues that suit both active circuit use and shelf presentation between sessions. The 14 Years age marking places it in a hobby category where scale appearance and recognisable vehicle styling matter as much as lap action. Its compact format supports close grid spacing, side-by-side comparisons with other 1:32 cars, and quick changes between race line-ups on home tracks. On a living room circuit, the red and gold finish stays easy to follow as the car passes through repeated laps and overtaking sections. Away from the track, the same colour combination gives the model a strong display presence among other slot racing vehicles and classic car themes.
Cars
Scalextric Shelby Mustang GT350 Slot Car 1:32
560004517€69.99
Scalextric Shelby Mustang GT350 captures the look of a classic race-prepared Mustang in 1:32 scale, pairing a blue body with white twin stripes and race number 133 for a track presence that stands out as soon as the car is on the rails. The body shell carries GT.350 side graphics, sponsor-style decals and the Mustang grille emblem, while transparent windows open a view into the cockpit where a driver figure in an orange helmet adds another layer of realism. A side exhaust opening and the broad proportions of the GT350 shape strengthen the period racing character. The combination of racing wheels and wide black tyres gives the model a purposeful stance that suits both active slot sessions and close inspection between runs. Age 14 Years On a home circuit, the decorated shell reads clearly through bends and straights, making each pass easy to follow. Away from the track, the livery, cockpit detail and classic muscle-car silhouette give the model a strong place in a display of historic racing machines.
Cars
Scalextric Shelby Mustang GT350H Slot Car 1:32
560004542€59.99
Scalextric Shelby Mustang GT350H brings classic American muscle into 1:32 slot racing with a black fastback body, 2 wide gold racing stripes and the distinctive G.T.350H livery. Set into a grooved circuit by its guide pin, the car is made to run in lane while carrying the long-hood, short-deck stance that defines the original road car. The body styling adds more than a simple colour scheme. A yellow hood scoop, silver bumpers, silver window trim and dark multi-spoke wheels build the period-correct look from several separate details, while triple vertical taillights shape the rear view with the signature Mustang layout. Clear glazing opens the view into the cockpit, where a seated driver figure adds another scale cue. The glossy finish and sharply placed side markings give the model a clean, focused presence whether it is waiting on the grid or moving through bends. On a home circuit, the compact 1:32 format suits close racing, lane changes in view and easy placement on the track before each run. Between sessions, the same fastback silhouette and Hertz Edition graphics give the car strong shelf presence for collectors who enjoy motorsport themes and classic road-car icons.
Model car kit
Scalextric Spa 24H Winners BMW Twin Pack
56004587A€134.99
Scalextric Spa 24H Winners BMW Twin Pack brings endurance racing into a compact 1:32 format with 2 BMW cars presented as a matched pair. The Spa 24H winners theme gives the set a clear motorsport identity, creating a focused display piece that sits naturally alongside circuit collections and racing memorabilia. The twin pack structure sets this release apart from a single-car edition by placing both BMW models in one coordinated set. That pairing supports side-by-side presentation, comparison of the 2 cars, and a stronger visual link to the Spa 24H event named in the title. The 1:32 scale keeps the format consistent with many established slot racing layouts and collecting displays, while the BMW focus gives the set a recognisable marque connection drawn directly from the name. The age marking is 14 Years. On a shelf, in a display cabinet, or as part of a wider 1:32 racing line, the matched pair creates a clear competition theme without needing extra context. The set also works as a motorsport gift choice where endurance racing, BMW models, and twin car presentations are the main draw.
Accessories
Scalextric Spark Plug Wireless Hand Controller
560008336€57.99
Scalextric Spark Plug brings wireless race control to a compatible Scalextric layout through a hand controller and a compact receiver module that plugs into the underside of the track. LED indicators on both the controller and the module show operating status at a glance, while the trigger-style control keeps acceleration input direct during side-by-side racing. The receiver connects at the marked track position, so the circuit surface stays uncluttered while the control link runs through the plug-in unit below. The controller body combines an angular top section with a curved handle that sits naturally in the hand, and the contrasting trigger makes the throttle control point easy to identify during fast laps. The set is sold as 1 wireless hand controller with the Spark Plug connection module. The age marking is 14 Years. On a 2-lane circuit, Spark Plug supports a cleaner driving area around the track because there is no controller cable crossing the table edge or the racing line. It suits home race sessions where quick reactions, repeated throttle changes and clear status indication matter from the first lap to the finish. Warning! Not suitable for children under 14 years.
Cars
Scalextric Subaru Impreza WRC 1995 1:32 Car
560004555€79.99
Scalextric Subaru Impreza WRC brings the look of Carlos Sainz's 1995 rally car into a 1:32 slot format, pairing competition styling with track-ready running. The blue body, yellow REPSOL graphics and race number 5 create an unmistakable WRC presence as the car sits low over the rails and heads into the next section of circuit. The bodyshell carries a strong set of rally details beyond the main livery. Gold wheels, a rear spoiler, roof vents, a roof antenna, black side mirrors and mud flaps shape the car with the visual cues of a mid-1990s works machine. Sponsor markings visible across the body add another layer of motorsport character, while the compact scale keeps the proportions suited to home slot layouts and shelf display. Under the front, the guide pickup shows the working setup for slot track use and defines how the car follows the lane through repeated laps. On a home circuit, this model suits close side-by-side running, timed laps and line-ups built around rally legends from the 1990s. The 14 Years age marking and the detailed exterior also place it naturally in collections that focus on WRC history, period liveries and recognisable competition cars.
Cars
Scalextric Subaru Impreza WRX 1997 Slot Car
560004507€67.99
Scalextric Subaru Impreza WRX 1997 captures the look of the 1997 ERC Champion in a focused 1:32 slot car format built for guided circuit racing. The white body carries blue, red and yellow rally graphics, while gold wheels and black tyres give the silhouette the unmistakable stance of a period competition car. Under the front end, the guide blade slots into the track to direct the car through each lane, turning the real car's rally identity into controlled slot racing action. The body shell is finished with period sponsor markings including Mobil 1, PHILIPS, STOMIL OLSZTYN, Michelin, Rapid Polska and mipo car systems, plus the PI62 EUD plate and windshield banner. A black side mirror and roof-mounted details add smaller visual touches that strengthen the competition look without crowding the shape. The result is a model that reads clearly at speed and still rewards a closer look when off the circuit. On a home layout, the compact scale suits close racing on standard slot track sections and makes the car easy to place alongside other 1:32 entries in a rally or touring line-up. Between runs, the livery, wheel finish and printed markings give it a strong display presence on a shelf, in a cabinet or beside a track setup. This car is recommended for ages 14 years and up.
Cars
Scalextric Supercar Showdown 1:32 Race Set
560001457€144.99
Scalextric Supercar Showdown sets up a 1:32 slot racing duel with 2 Lamborghini Revuelto cars, bringing sharp supercar styling and close circuit action into the same box. The green and purple bodies stand apart at a glance, so each lane stays easy to follow as the cars sweep through the layout and race for position. The set uses wired hand controllers with large handles and trigger operation, giving direct throttle input through every straight and corner. Black track sections with silver rails guide the cars through the circuit, while the crossover section changes the rhythm of each lap by tightening the racing line and increasing the pressure on timing. White lane markings and printed lane numbers on the track section help identify the running order during setup and racing. The Lamborghini Revuelto shapes add a distinct visual edge with low profiles, angular surfacing, black wheels, dark window areas and contrasting wheel arch accents. At 14 Years+, the format suits competitive home racing sessions where 2 drivers can run repeated lap battles and refine throttle control from one round to the next. The 1:32 scale also keeps the set closely aligned with the look and proportions associated with classic slot car racing, making the circuit easy to stage on a table, floor or dedicated racing area.
Cars
Scalextric TFATF Toyota Supra Brian O'Conner
560004591€67.99
Scalextric presents the TFATF Toyota Supra - Brian O'Conner as a 1:32 slot racing car with a film-linked identity that is instantly recognisable on the track. The combination of the Toyota Supra name, the TFATF theme and the Brian O'Conner decoration gives this model a clear visual role in a racing line-up or display shelf. The 1:32 scale makes the car easy to integrate into an existing slot racing collection, especially where matching scale matters for track presence and display balance. The named character association adds a specific screen reference rather than a generic sports car look, which gives the model stronger collecting appeal for fans of movie vehicles. With the Scalextric name attached, the car sits naturally within a slot racing range built around recognisable vehicles and themed releases. Minimum age 14 Years is stated for this model. On a home circuit, the compact format suits regular running sessions, while the detailed theme makes the car equally suited to shelf display between races. It works well as a single addition to a film-car collection or as part of a broader 1:32 garage built around road cars with distinct identities.
Cars
Scalextric The Professionals Capri Twin Pack
560004642€134.99
Scalextric The Professionals Capri Twin Pack brings the look of a classic screen-inspired racing pairing into 1:32 slot car form. The set centres on 2 Ford Capri cars, creating an immediate head to head setup that suits close circuit duels, mirrored lane starts and repeated lap comparisons on the same layout. The 1:32 scale keeps both cars easy to place, marshal and store, while still giving enough body detail for the Capri silhouette to read clearly at speed. Because the pack is built around a matched pair rather than a single car, it supports balanced race sessions straight away and gives a consistent visual theme across both lanes. The product data marks this set at 14 Years, placing it within the hobby side of the Scalextric range. Batteries are not included. On a home circuit, the twin format lends itself to quick competitive sessions, timed laps and back to back runs with the same car shape in each lane. Between races, the paired presentation also works neatly for shelf display, keeping the 2 cars together as a recognisable The Professionals set.
Cars
Scalextric Toyota Celica GTFour WRC 1:32
560004665€67.99
Scalextric Toyota Celica GTFour D'Auriol 95 WRC brings a well-known rally machine into 1:32 scale with a focused slot racing format that suits circuit running and motorsport collecting alike. The compact proportions and WRC identity give the car a strong visual presence as it lines up on the track with other rally and touring entries. The model is listed under powered vehicles and electric or battery car sets and accessories, placing it within the slot racing world rather than as a static replica. Its Toyota Celica GTFour designation and D'Auriol 95 WRC theme connect the car to a specific competition era, which gives the livery and body shape more context during race sessions. The 1:32 scale is a widely recognised format in slot racing, helping the car sit naturally within established home circuit collections. The product data marks the model for 14 Years and up. Batteries are not included. On a home layout, the rally styling adds a different note to mixed grids, especially when classic circuit sections, lane changes and timed laps bring out the contrast between road racing and WRC-inspired design. Between runs, the same model also works as a shelf piece that keeps the Toyota name, the Celica GTFour shape and the 1995 rally reference in view.
Cars
Scalextric Toyota Supra British GT Car 1:32
560004656€59.99
Scalextric Toyota Supra British GT brings the shape and attitude of a modern GT racer to the slot car circuit in 1:32 scale. The compact format suits home track layouts while the Toyota Supra body gives each lap a clear motorsport identity, whether the car is lining up on the grid, threading through bends or running repeated timed sessions. The 14 Years age marking places this model in a category aimed at more considered handling, layout building and race setup. Its role within powered vehicle racing makes it a natural fit for circuit collections that mix different liveries, classes and manufacturers. The British GT theme adds a recognisable competition reference, which helps the car stand out in display cabinets as well as on the rails. The 1:32 proportion also works well for building fuller race scenes with pit buildings, barriers, grandstands and additional track sections. On a home circuit, this car suits short sprint races, longer lap-count sessions and side-by-side comparisons with other 1:32 entries in the range. Between runs, the Toyota Supra British GT also holds its own as a display model, carrying the visual character of contemporary GT racing into shelves, desks and hobby spaces.
Cars
Scalextric Triple Pack Legend J.Clark 1:32
56004395A€209.99
Scalextric Triple Pack Legend J.Clark brings classic racing character into a 1:32 slot car format with 3 Lotus-themed models gathered in one set. The combination of the J.Clark name, Lotus identity and triple-pack format gives the set a strong motorsport focus, whether the cars are lined up on a home circuit or arranged as part of a display. The 1:32 scale places the cars in a format that is widely recognised in slot racing, making the set easy to integrate into an established collection and visually consistent with other racers in the same scale. With 3 cars in the pack, race scenes can be arranged with a fuller grid and a more connected team look than a single car can offer. The set also supports comparison between liveries and placement across track sections, pit areas or shelf displays where matching scale matters. On the circuit, the triple-pack format lends itself to themed race sessions and classic motorsport line-ups. Off the track, the Lotus and J.Clark presentation gives the set a clear collector appeal for fans of historic racing names and 1:32 slot car displays. Batteries are not included.
Cars
Scalextric Volkswagen Golf GTI Gulf Edition 1:32
560004609€59.99
Scalextric Volkswagen Golf GTI Gulf Edition brings the familiar hatchback form of the Golf GTI into 1:32 slot racing, pairing a recognisable road-car silhouette with Gulf Edition graphics that stand out on the circuit. The compact proportions and motorsport-inspired finish give each lap a clear visual character as the car moves through bends, straights and start-grid setups. The 1:32 scale places this model in one of the most widely used slot racing formats, making it a natural fit for collectors and race layouts built around that size. Volkswagen Golf GTI styling sets it apart from prototype racers and open-wheel designs, with a body shape that keeps the road-car identity front and centre. The Gulf Edition treatment adds another layer of distinction through its specific livery, giving the model a strong shelf presence between race sessions. The age marking is 14 Years. On a home circuit, this slot car suits close head-to-head running, practice laps and lineup displays built around touring cars, road cars or marque favourites. It also works well as a collector piece for fans of the Volkswagen Golf GTI and Gulf Edition racing colours in 1:32 scale. Warning! Not suitable for children under 14 years.
Cars
Scalextric Volkswagen Golf GTI Mk.1 Polizei 1:32
560004572€59.99
Scalextric Volkswagen Golf GTI Mk.1 Polizei captures the compact lines of the classic hatchback in a 1:32 slot car format, pairing the familiar Mk.1 body shape with Polizei markings that stand out as the car moves through bends and straights. The combination of road-car proportions and police livery gives the model a different visual rhythm from typical racing coupes on a home circuit. The 1:32 scale makes it a natural fit for layouts built around the same format, whether the focus is close side-by-side running, themed road-car grids, or a collection built around recognisable automotive icons. The Volkswagen Golf GTI Mk.1 silhouette brings short overhangs, a squared rear profile, and the upright hatchback stance that defined the original car. Those details give the model a strong period character even when standing still between sessions. Minimum age 14 Years is stated for this model. On the track, the Polizei finish gives each lap a clear identity, especially on urban-style layouts, road sections, or mixed grids where a hatchback shape breaks up a field of lower sports cars. Away from racing, the same 1:32 format also suits shelf display with other slot vehicles, keeping proportions consistent across a wider collection.
Cars
Scalextric Volkswagen Kafer #66 Blue Slot Car
560004498€69.99
Scalextric Volkswagen Kafer #66 brings classic Beetle racing style to a 1:32 slot car with a light blue body, bold 66 markings and a compact silhouette that stands out clearly on the track. The rounded fenders, silver trim details and race-prepared livery give each lap a strong vintage motorsport look while the guided front pickup keeps the car in the slot rails during electric circuit running. Close-up details add depth beyond the main shape. Silver hubcaps, a side mirror, windshield wipers, orange front indicators, red rear lights and twin rear exhausts help the model read like a miniature competition car rather than a simplified toy vehicle. Printed sponsor-style graphics such as Esso and other period-style markings reinforce the historic paddock feel, while clear windows and visible interior seating add another layer of scale character. The black tyres and low, rounded body profile create a neat visual contrast against modern slot layouts and make the Beetle form instantly recognisable from multiple angles. On a home circuit, the 1:32 scale format fits naturally into electric slot racing sessions where classic shapes bring variety to the grid. Between races, the same body detailing and number graphics give the car a strong display presence on a shelf, desk or alongside other historic racing models. Warning! Not suitable for children under 14 years.
Model car kit
Scalextric Volvo 850 Estate Police Car 1:32
560004627€59.99
Scalextric Volvo 850 Estate Police brings the unmistakable shape of the Volvo 850 Estate to the circuit in 1:32 scale, combining a police livery with the long-roof touring car profile that made this model stand apart on the track. The compact slot car format suits home racing layouts where quick direction changes, close lane-to-lane competition and repeated lap sessions keep the action focused. The estate body shape gives this release a different visual balance from more common saloon racers, with an extended roofline and rear section that make the silhouette easy to pick out as it moves through corners. In a 1:32 line-up, that profile adds variety to mixed grids and helps create a recognisable period look on the circuit. The police decoration adds another clear visual cue, making the car easy to identify during side-by-side running or when parked in a display row between sessions. An age marking of 14 Years is stated in the product data. On a home slot layout, the model suits short sprint races, timed laps and themed race nights built around touring car favourites and unusual body styles. Between runs, the Volvo 850 Estate Police also works neatly as a display piece for collectors who enjoy motorsport-inspired road car shapes in a compact scale format.
Cars
Scalextric Williams FW11B 1987 Slot Car 1:32
560004508€75.99
Scalextric Williams FW11B 1987 brings a classic Grand Prix silhouette to 1:32 slot racing with its low single-seater body, open cockpit and prominent front and rear wings. The number 5 livery and Honda-powered Williams styling give this model a strong late-1980s Formula 1 identity that reads clearly on the circuit and in a display line-up. The bodywork carries period-style sponsor graphics across the nose, side sections and rear wing, while the exposed suspension styling and driver helmet detail add depth to the racing replica. Beneath the car, the guide blade sits in the slot and the pickup braids draw power from the rails, the core mechanism that lets the car follow the groove through straights and bends. Black wheels and wide slick tyres complete the era-correct look, matching the visual language of Grand Prix cars from the 1987 season. On a home circuit, the compact 1:32 scale fits naturally into established slot layouts and makes close wheel-to-wheel sessions easy to stage. Between races, the bold yellow, blue and white colour scheme, tall rear wing and crisp markings give the Williams FW11B 1987 a strong shelf presence for motorsport collections. Age 14 Years
Cars
Scalextric Williams FW44 GP 2022 Car 1:32
560004425€69.99
Scalextric Williams FW44 GP 2022 places a modern Grand Prix car on the slot circuit in 1:32 scale, combining the sharp proportions of the FW44 with the visual impact of Williams Racing colours. The low nose, halo, sidepods and rear wing give the car the unmistakable outline of the 2022 Formula 1 generation, creating a focused racing presence on every lap. This version is styled around Alexander Albon and carries a high-definition finish that keeps the livery crisp across the bodywork. Blue, black and pink accents work with the printed sponsor markings to give the single-seater a recognisable team identity. The open-wheel layout, exposed slick tyres and compact cockpit shape bring the look of a current-era race machine into a format built for home slot racing. Minimum age is 14 Years, matching the detailed presentation and collector-friendly appeal. On a home circuit, the FW44 suits head-to-head race sessions, display between runs, or a modern Formula 1 grid built around recent seasons. It adds a clear team and driver reference to a collection, and its contemporary body shape gives race-night line-ups a distinctly current motorsport feel.
Cars
Scalextric Williams FW45 Gulf Edition 1:32 Car
560004559€69.99
Scalextric Williams FW45 Gulf Edition brings modern Formula-style racing into 1:32 scale with a sharply defined open-wheel body, a low aerodynamic nose and the distinctive Gulf colour scheme. Light blue, black and orange surfaces give the car a strong track identity, while the halo cockpit surround and wing package echo the look of the full-size FW45 driven by Albon. The body carries printed race details that deepen the replica feel, including the number 63 and multiple sponsor markings visible across the nose, side sections and wings. Front and rear wing elements frame the car with the crisp proportions associated with current single-seater design, and the exposed slick tyres complete the unmistakable circuit-focused stance. The compact 1:32 format suits established slot layouts, mixed grids and display rows where contemporary race cars stand out through livery and shape rather than bulk. On the circuit, the Formula profile creates a fast visual impression as the car threads through bends and straights, with the open-wheel layout and low bodywork reading clearly at speed. Between race sessions, the same printed details and modern Williams styling give the model a strong display presence for collectors aged 14 years and up.
Model trucks
Scania 143M 500 Streamline 4x2 Model Kit
510003950€59.99
The Italeri 1:24 Scania 143M 500 Streamline 4x2 model kit brings one of the best-known European tractor units of the late 1980s and mid-1990s onto the workbench as a detailed scale build. Its cab-over form, 4x2 layout and Streamline styling give the finished truck a strong long-distance transport presence, whether placed in a depot scene, a roadside display or a commercial vehicle collection. The full-size Scania R143 M Streamline was part of the Series 3 range introduced in 1987 and became closely associated with long-haul freight work. This kit draws on that identity with a build centered on structural and mechanical detail, including chassis elements, suspension parts, tanks, interior pieces and exterior fittings. The original truck was known for a 500 horsepower V-8 engine and an aerodynamic design shaped to reduce drag and fuel consumption, details that help define the character of the subject being recreated here. Rubber tyres with realistic tread and embossed sidewall markings add another layer of scale accuracy to the completed model. With an assembly time of 600 minutes, the build suits model makers who enjoy a longer project with painting and finishing stages. The completed 1:24 truck fits naturally into transport dioramas, workshop scenes and lineups of classic commercial vehicles. Paints, cement and tools are required separately.
Model trucks
Scania 770 S V8 White Cab Model Kit 1:24
510003965€71.99
The Italeri 1:24 Scania 770 S V8 White Cab model kit brings a modern long distance road tractor into a detailed scale build, combining the clean white cab finish with the tall, contemporary S series profile seen on current heavy transport routes. At 1:24 scale, the truck's proportions give the grille, roofline and side graphics enough presence to stand out clearly once assembled. The Scania S series entered the market in 2016, and this kit reflects that newer generation with a cab design shaped around driver space, aerodynamic surfaces and current commercial vehicle styling. The build focuses on the tractor unit rather than a full truck and trailer combination, which keeps attention on the cab, chassis and mechanical layout. Sprue layouts show separate structural and detail sections for the frame, axle components, tanks, interior fittings and exterior parts, creating a build with visible progression across the underframe and cab. The included assembly kit format suits model builders who enjoy painting, fitting and finishing a road vehicle with a realistic fleet look. On the bench, the model offers a focused truck subject with enough technical detail to reward careful painting of the interior, running gear and body accents. Once completed, the Scania 770 S V8 White Cab fits naturally into a commercial vehicle collection, a transport themed display or a shelf dedicated to modern European truck subjects. Paints, glue and tools are required separately. Warning! Not suitable for children under 14 years.
Model trucks
Scania R400 Streamline Flat Roof Model Kit 1:24
510003947€61.99
The Italeri 1:24 Scania R400 Streamline Flat Roof model kit brings the lines of a modern tractor unit into a detailed build with a finished model length of 247 mm. The Streamline cab shape, front grille, wheel arches and rear fifth-wheel area give the truck a strong road-going presence once assembled. The build is based on injection-moulded parts and is completed with decal sheets for 2 versions, allowing the exterior to be finished with different markings and graphic layouts. An accurate metallic adhesive sheet is also supplied for trim details that match the look of the real vehicle more closely. The cab can be lifted on the finished model, revealing the engine area underneath and adding a mechanical feature that changes how the truck can be displayed. Visible details such as mirrors, windshield wipers and roof lights help the model read as a Scania R400 Streamline rather than a generic heavy truck. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a display case or as part of a truck collection, the flat-roof configuration gives this 1:24 build a distinct profile. The combination of structural assembly, surface finishing and version-specific markings makes the kit suited to builders who enjoy both construction and final presentation.
Model trucks
Scania R730 Streamline 4x2 Model Kit 1:24
510003906€71.99
The Italeri Scania R730 Streamline 4x2 model kit brings a modern heavy tractor into 1:24 scale with the bold presence of a decorated show truck. Upgraded moulds shape the cab, front fascia and exterior panels with sharper definition, while the 24.7 cm finished length gives the completed truck a strong shelf presence without overwhelming a display case. The full-size Scania R Series is known for V8-powered heavy haulage, and that character carries into this assembly kit through the tall cab profile, prominent grille treatment and road-focused tractor layout. Super decals for 2 versions open up different finishing directions, including Silver Griffin-themed graphics, striping and marking details that change the look of the completed build. Additional chromed parts work alongside super chromed adhesive to pick out trim areas with a brighter metallic effect. The kit also supports a more involved paint and weathering approach, making panel edges, grille sections and cab contours rewarding areas for careful brush or airbrush work. At 600 minutes assembly time, this is a substantial project for builders aged 14+ who enjoy spending time on fit, paintwork and final presentation. On the workbench, the truck offers a focused sequence of construction and finishing steps; once completed, the streamlined cab, graphic livery and plated details give the model a strong display presence inspired by European show trucks.
Model trucks
Scania R730 Streamline Show Truck Model Kit
510003952€76.99
The Italeri 1:24 Scania R730 Streamline Show Truck model kit brings the imposing look of a decorated road tractor into a detailed scale build. With a finished length of 24.7 cm, the assembled truck carries the long, tall proportions of the Scania R series and gives the cab, side fairings and front end enough surface for a striking display finish. This assembly kit is built around the show truck theme rather than a plain fleet specification. The Scania R730 Streamline design is known for its strong road presence, and this version leans into that character with metallic adhesive details, chromed components and a dedicated decal set for the Team Cosentino livery. The decal sheet covers major exterior markings as well as smaller graphic details, allowing the cab and trim areas to be finished with a layered, authentic look. New wheels and tyres add another visible upgrade, shaping the final stance of the tractor and reinforcing the customised appearance. Assembly is required, with a stated build time of 600 minutes. On the bench, the kit suits careful painting, trim work and decal application across the cab and chassis sections. Once completed, the Scania R730 Streamline Show Truck stands out as a display model that combines truck styling, brightwork and livery detail in a format that rewards steady, precise assembly.
Model trucks
Scania R730 V8 Black Amber 1:24 Model Kit
510003897€69.99
The Italeri Scania R730 V8 Black Amber is a 1:24 assembly kit that captures the look of Scania's special-edition road tractor in a striking show-truck finish. At 24.7 cm long, the completed model brings the tall stance of the R730 together with the CR19 Topline cab and the visual character of the Titanium version, creating a build with a strong shelf presence and a clear connection to the full-size truck. This edition stands out through details tied directly to the Black Amber theme. The kit comes with 30 ml of Amber Metallic acrylic paint for the signature body colour, while the decal sheet carries the sweeping side graphics, Black Amber scripts, R730 markings, dashboard graphics, tyre lettering and a wide selection of European-style registration plates. Chromed wheel rims and chromed adhesive trim add further contrast to the dark finish. The subject itself is rooted in the 2011 Black Amber release developed with SVEMPAS AB and based on the Scania R 730 LA4x2MNA Euro 5 V8, giving the model a specific place within Scania's line of special trucks. With an assembly time of 600 minutes, the kit suits longer bench sessions where paint, decals and trim can be applied step by step. Once completed, the Scania works equally well as a display centrepiece or as part of a 1:24 truck collection focused on modern European tractors and special editions.
Model trucks
Scania R730 V8 Topline Imperial Model Kit 1:24
510003883€69.99
Scania R730 V8 Topline Imperial brings the presence of a decorated show tractor into a 1:24 scale model kit with a finished length of 24.7 cm. The build focuses on the distinctive lines of the Scania R Series and the visual impact that made this truck format a standout choice for custom road-going display machines. The kit centres on the Scania R730 V8 Topline cab and pairs that shape with finishing parts that push the look beyond a standard fleet tractor. A large decals sheet supplies Imperial markings, striping, badges and interior detail graphics, while super stickers add further trim for the exterior surfaces. Additional chromed parts create bright highlights across selected components, and the chromed wheel rims reinforce the polished show-truck character around the running gear. The result is a build that rewards careful painting, decal placement and detail work across both the cab and chassis. On the bench, the 600 minutes assembly time gives space for a measured, step-by-step approach to construction and finishing. Once completed, the 24.7 cm model suits shelf display, diorama parking scenes or a line-up with other 1:24 truck builds, where the Imperial graphics and chrome detailing stand out clearly. Radio gear, a battery pack, a charger and paints are not part of this kit.
Model trucks
Scania S770 4x2 Model Kit 1:24 Grey Cab
510003971€69.99
The Italeri Scania S770 4x2 Normal Roof Grey Cab brings a modern long-haul road tractor into 1:24 scale as a detailed plastic kit with a strong focus on structure, cabin detail and mechanical realism. Based on the Scania S series introduced in 2016, this version captures the compact Normal Roof configuration and the contemporary lines that define the full-size truck. The build centres on a newly detailed cabin and interior, giving the model more depth once the bodywork comes together. A fully detailed V8 engine adds another layer of realism, while the openable driver door and openable radiator grille create clear access points that keep key areas visible after assembly. Photo-etched parts introduce finer detail where sharper edges matter, and chromed adhesive elements add contrast across selected trim areas. Rubber tyres complete the wheel setup with a more realistic finish than rigid moulded alternatives. Super decals for 2 versions allow different finishing directions within the same Scania S770 4x2 subject. On a shelf, desk or in a truck model collection, the finished 1:24 build carries the upright stance and modern aerodynamics of the S series with convincing presence. Radio gear, a battery pack, a charger and paints are not part of this kit; assembly and finishing focus on the supplied model components and chosen paintwork. Warning! Not suitable for children under 14 years.
Model tanks
Sd. Anhänger 51 model kit 1:35 with 2 trailers
510006450€12.49
The Italeri Sd. Anhänger 51 model kit recreates a compact military trailer in 1:35 scale and includes 2 matching builds for display with a wider range of historical vehicle scenes. Each finished trailer measures 7.6 cm and captures the compact proportions that made this design a practical companion for many Wehrmacht vehicles. The Sd. Anhänger 51 was developed as an ammunition carrier and was typically paired with anti-aircraft half-tracks armed with 20 mm Flak guns. That background gives the model a clear role in diorama planning, whether the scene focuses on transport, resupply or field deployment. The body layout supports different finishing directions, with reference material showing alternative body colours and painted detail areas for rubber, metal and wood elements. The interior compartment can be shown open, adding another layer of visual depth when painting stored equipment and cargo details. On a shelf, in a military vehicle lineup or as part of a larger battlefield setting, the twin-trailer format opens more staging options than a single build. One trailer can be finished closed for a clean transport look, while the second can be displayed with the lid raised to show the compartment and equipment inside. Cement, tools and paints are required separately.
Model tanks
Sd. Kfz 250/3 Model Kit 1:72 with 3 Figures
510007034€15.99
The Italeri 1:72 Sd. Kfz 250/3 brings a notable World War II command half-track into compact model form, combining the angular armored hull, front steering wheels and tracked rear running gear that defined this Leichter Funkpanzerwagen. The large frame antenna above the vehicle gives the build its unmistakable radio-link silhouette and makes the finished model stand out on a shelf or within a historical diorama. Based on the Sd.Kfz. 250/3 variant used as a mobile communication center, the kit reflects a vehicle developed to link forward troops with artillery and air support. The subject is armed with MG34 machine guns in the source vehicle history, and the open upper structure leaves key exterior details visible once assembled. Marking options cover 4 versions, including the well-known Greif used by Erwin Rommel in North Africa, while the included 3 figures help create a more complete scene around the finished vehicle. Gluable rubber tracks add another material contrast to the build and shape the characteristic half-track stance. With a stated assembly time of 600 minutes, this assembly kit offers a longer-format build suited to careful painting and finishing. The 1:72 scale works well for compact military displays, campaign-themed layouts and collectors who want historical vehicle subjects that fit into limited display space. Paints and tools are required separately.
Model tanks
Sd. Kfz. 184 Panzerjager Elefant Model Kit
510007012€13.99
The Italeri Sd. Kfz. 184 Panzerjager Elefant model kit recreates a World War II tank destroyer in 1:72 scale, combining a compact 11.7 cm display length with the distinctive mass of a casemate fighting vehicle. Its long gun, tracked chassis and slab-sided armoured structure give the finished build a strong period character that stands out on a shelf, in a diorama or alongside other military subjects in the same scale. This assembly kit is based on the Sd. Kfz. 184 Panzerjager Elefant, a self-propelled gun developed on a Pz.Kpfw. IV tank chassis and used by the German Army for infantry support and anti-tank roles. The subject matter gives the build a clear mechanical identity, with the fixed superstructure and gun layout differing from a turreted vehicle. Assembly takes 600 minutes, creating room for a measured build process that suits painting, fitting and finishing in stages. Decals for 1 version are included, allowing the completed model to carry defined markings rather than remaining a plain vehicle shape. On the bench, the 1:72 scale keeps the model manageable while still leaving space for paintwork and weathering across the armour panels, running gear and gun barrel. Once completed, the 11.7 cm format fits naturally into display cabinets, historical scenes or a broader collection of military vehicles from the Second World War.
Model tanks
Sd.Kfz 142/1 Sturmgeschütz III Model Kit 1:72
510107522€16.99
The Italeri Sd.Kfz 142/1 Sturmgeschütz III brings a classic German self-propelled gun into a compact 1:72 scale format, with 2 matching models in one Assembly kit and a finished length of 7.6 cm per vehicle. Built on the Pz.Kpfw. III chassis, this design combines the low casemate silhouette with the direct, purposeful look that made the Sturmgeschütz series a constant presence across Second World War battlefields. The kit uses 100% new moulds and a fast assembly layout, with 23 parts for each vehicle shaping the hull, track units and upper structure into a clean base for painting and finishing. Special wargame decals support historically styled markings, and the supplied references show camouflage and insignia options linked to Smolensk in late 1943, Normandy in summer 1944, and Italy in 1944. Assembly is required, with a stated build time of 600 minutes. Paints, glue and tools are required separately. On a gaming table, the pair works naturally as matched assault guns in the same force, while a display shelf or bunker diorama can use the 2 vehicles to show different markings and camouflage approaches. The compact scale also leaves room for terrain, infantry and fortifications around the finished models.
Model tanks
Sd.Kfz 265 Kleine Panzerbefehlswagen 1:72 Kit
510007072€13.49
The Italeri Sd.Kfz 265 Kleine Panzerbefehlswagen in 1:72 scale brings a distinctive early-war command vehicle into a compact assembly project with a finished model length of 5.6 cm. Its defining form comes from the Panzer I Ausf. B chassis combined with a tall fixed superstructure, created to provide room for battlefield maps, transmission equipment and communication systems instead of a rotating turret. That layout gives the build a noticeably different silhouette from a standard light tank, with the raised command section and hull-mounted radio antenna shaping the vehicle's role on the battlefield. The kit focuses on these historical features while keeping the small scale precise and manageable for bench work. Marking options from the decal sheet support different finishing choices, and the included crew figure adds a clear focal point at the hatch area. The vehicle represents a type used in combat operations in September 1939 during the invasion of Poland, which gives the completed model a defined historical setting. During assembly and painting, the compact dimensions make it easy to handle fine exterior details such as the superstructure panels, track runs and hull equipment. Once completed, the model fits naturally into a 1:72 military collection, diorama scene or shelf display centered on early Second World War armored vehicles.
Model tanks
Sd.Kfz. 142/1 StuG III Model Kit 1:56 Scale
510025756€21.99
The Italeri Sd.Kfz. 142/1 StuG III assembly kit brings a compact WWII armored vehicle subject into 1:56 scale, combining a low, purposeful silhouette with the hands-on detail of a 56-part build. At 11.0 cm in length, the finished model has a display-friendly footprint while still carrying the visual weight of the original assault gun design. The subject reflects the wartime development of the StuG III from infantry fire support to an anti-tank armored vehicle, giving the build a clear historical identity beyond its shape alone. The kit can be assembled as 2 alternative models, covering either the Sturmgeschutz III or the Sturmhaubitze 105 configuration. Decals for 2 versions extend that choice into the finishing stage, where markings help define the final appearance. The included assembly kit format keeps the focus on construction and painting rather than prebuilt presentation, and the stated assembly time of 600 minutes suits a longer, more deliberate bench session. Paints, cement and tools are required separately. On the workbench, the tracked layout, armored hull and gun installation create a build with distinct stages and visible progress across the sprues. Once completed, the model sits comfortably in a display cabinet, on a desk or alongside other WWII vehicle subjects where the 1:56 scale and alternate version options add variety to a military model lineup. Warning! Not suitable for children under 14 years.
Model tanks
Sd.Kfz. 234/3 Model Kit 1:35 with PE Parts
510006756€35.99
The Italeri Sd.Kfz. 234/3 brings the lines of a late-war German heavy reconnaissance vehicle into 1:35 scale with a build that combines the angular 8-wheel hull, the open-topped fighting compartment and the short-barreled 75 mm KwK37 cannon. On the finished model, these elements create the compact, purposeful profile that made the Sd.Kfz. 234/3 one of the most distinctive variants in the 234 series. The kit is designed as an assembly build and includes rubber tyres, a photo-etched fret and a decals sheet for 4 versions. The real vehicle reached a maximum road speed of 85 km/h, and the model reflects that fast armored-car layout through its long wheelbase, multi-wheel running gear and low armored body. Sprues A, B, C and D cover the chassis, hull, interior and smaller fittings, while the PE sheet handles finer details that benefit from thinner metal parts. The marking options shown in the guide include different camouflage schemes and unit markings, giving the build room for varied finishing work across late-war settings. Assembly time is 600 minutes. On the bench, the combination of moulded parts, PE details and 9 tyres supports a measured, step-by-step build with plenty of surface detail to paint and weather. Glue, paints and tools are required separately. Warning! Not suitable for children under 14 years.
Model tanks
Sd.Kfz. 251/1 Stuka Zu Fuss 1:72 model kit
510007080€18.99
The Italeri Sd.Kfz. 251/1 "Stuka Zu Fuss" in 1:72 scale brings a distinctive Second World War half-track into a compact model kit with strong visual presence. At 8.1 cm long, the finished build combines the armored transport layout of the Sd.Kfz. 251 with the Wurfrahmen 40 rocket launcher installation, creating a silhouette defined by side-mounted launch frames and tracked rear running gear. The assembly kit is designed as a detailed build for ages 14+ and develops through a 600-minute construction process. Its subject is based on the Wehrmacht half-track powered by a Maybach 6-cylinder petrol engine, a vehicle type that reached 55 km/h and served across multiple operational fronts. This version represents the launcher conversion with 6 rocket compartments, arranged as 3 on each side. The kit also offers an alternative radio version, adding another configuration path during the build. Decals support 3 finishing versions, and the included 3 figures extend the scene beyond the vehicle itself. Once assembled and painted, the model suits shelf display, historical dioramas and focused hobby sessions centered on military vehicles in 1:72 scale. The combination of compact dimensions, alternate configuration and crew figures gives the finished Sd.Kfz. 251/1 a strong battlefield character without demanding a large display footprint.
Model tanks
Sd.Kfz. 251/8 Ambulance Model Kit 1:72 Scale
510007077€15.99
The 1:72 Sd.Kfz. 251/8 Ambulance from Italeri brings a historically based WWII half-track ambulance into a compact model kit with a finished length of 8.1 cm. Its armored body shape, front wheel and rear track layout, and medical service markings give the completed vehicle a clear field-ambulance identity that stands out in military model displays. This assembly kit is built around detailed molded parts that reproduce the characteristic structure of the Sd.Kfz. 251/8 variant. The half-track configuration combines a steering front axle with a tracked rear section, reflecting the original vehicle layout used for movement across difficult ground. Decals add red cross insignia, registration markings and equipment labels that sharpen the final appearance and support historically styled finishing. The kit also includes figures shown on the parts sprues, adding extra scene-building potential around the vehicle. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a diorama, or as part of a 1:72 military vehicle lineup, the completed model adds a distinct support-vehicle role beside combat subjects. Builders can focus on camouflage painting, decal placement and weathered field presentation to give the ambulance variant a convincing operational look. Paints and tools are required separately.
Model tanks
Sd.Kfz.305 Ambulance Model Kit 1:72 Scale
510007055€13.99
The Italeri Sd.Kfz.305 Ambulance brings the Opel Blitz military truck into 1:72 scale as a detailed plastic assembly kit with a finished model length of 8.2 cm. Its enclosed medical body, rounded cab and period truck layout give the build a clear World War II ambulance character that stands out on a display shelf or within a wider vehicle lineup. This version draws on the widely used Opel Blitz platform, a medium truck deployed by the German Army on multiple fronts during World War Two. The ambulance conversion adds a box-style rear compartment, side openings and prominent medical marking areas that change the silhouette from a standard cargo truck to a dedicated field transport vehicle. Decals for 4 versions open up different historical appearances, including varied camouflage and unit markings, so the painting stage can follow several documented schemes. The 1:72 format also makes the model easy to place alongside other vehicles, figures and scenery from the same scale. A 600 minute assembly time gives the project the pace of a classic scale build, with separate stages for construction, painting and final markings. On the workbench, the compact size keeps handling manageable while still leaving enough surface detail for careful brushwork. Once completed, the model fits naturally into World War II dioramas, convoy scenes or military vehicle displays where an ambulance variant adds a distinct support role beside transport and combat machines.
Model tanks
SdKfz.161 PzKpfw. IV F1 Fast Assembly Kit
510107514€16.99
The Italeri SdKfz.161 PzKpfw. IV F1 Fast As.Kit brings a compact 1:72 armour subject into a build focused on clear structure and historical variation. At 8.2 cm long, the finished tank keeps a small footprint while still showing the layered look of the Panzer IV hull, turret and main gun. Each box contains 2 kits, and the instruction layout breaks the build into distinct stages with lower hull, upper hull, separate track units and turret components. The turret assembly uses a central mounting point, and the gun area is built with alternative parts that support either the F1 or F2 version. This gives the build a concrete choice in silhouette, with the shorter F1 barrel or the longer F2 arrangement changing the front profile of the tank. Decal options support 2 historical finishes, one for German Army service in Russia 1942 and one for North Africa 1942. Paints are required separately. On a workbench, the 600 minute assembly time suits a slower painting and finishing rhythm rather than a quick single session. Once completed, the pair format works well for a small battlefield scene, a compact armour lineup or a wargame force that benefits from 2 matching vehicles with different markings.
Li-ion batteries
Sea Crusher Battery Pack, RC accessory, 7.4V
500608277€17.99
Built as a dedicated power source for the Sea Crusher, this Li-Ion battery pack combines 7.4 V, 1200 mAh and 8.88 Wh in a compact format made for RC use. The grey wrapped pack with red and black leads and a black 2-pin style connector gives the setup a clear, purpose-built layout that suits replacement duty as well as keeping a spare ready between runs. Its stated charging data adds useful workshop detail for hobby use: the pack is fast-charge capable and supports a maximum charging current of 1 C at 1200 mA. The label also specifies charging before use, correct polarity during connection and unplugging the connector for storage, so the handling routine is clearly defined by the pack itself rather than left vague. As an accessory within an electric RC setup, it adds a concrete energy option for keeping the Sea Crusher prepared for the next outing. Whether used as the main pack in the model or kept on hand as a backup, the battery fits naturally into bench charging, transport and running-day rotation. The 14 years and up marking places it within a hobby-oriented RC environment where charging equipment, connector handling and model-specific installation are part of regular use. Warning! Not suitable for children under 14 years.
Model tanks
Semovente L40 da 47/32 Model Kit 1:35 Scale
510006477€30.99
Italeri Semovente L40 da 47/32 captures a compact World War II self-propelled gun in 1:35 scale, built around the distinctive layout that replaced the L6/40 turret with a 47/32 Mod.1935 anti-tank cannon in an open casemate. The small silhouette, riveted armour style and tracked undercarriage give the finished model a focused military presence on the workbench or in a display line. The assembly kit uses a multi-part construction with hull sections, suspension elements, wheels, track runs and upper body details that reflect the vehicle's period design. Instruction visuals show separate interior fittings, exterior tools, towing hardware and upper-hull components, giving the build more structure than a simple snap-together format. Photo-etched parts introduce thinner detail pieces for selected fittings, while acetate parts cover transparent elements. Marking options extend the finish with decals for 4 versions, supported by camouflage references for wartime schemes used in Libya, Tunisia, Sicily, Northern Italy and the homeland campaign. With a stated assembly time of 600 minutes, the project suits a slower, detail-led build where painting, decal placement and final weathering can be handled in stages. The completed Semovente L40 da 47/32 fits naturally into 1:35 military scenes, whether placed on a desert route, a maintenance setting or alongside other Second World War armour. Paints and cement are required separately.
Model tanks
Semovente M43 da 105/25 Bassotto Model Kit 1:35
510006751€39.99
The Semovente M43 da 105/25 Bassotto model kit in 1:35 scale recreates the most powerful Italian armored vehicle used during World War II with a compact casemate layout and the long Ansaldo 105/25 howitzer at the center of the build. The finished subject carries the low, widened, and lowered proportions derived from the M15/42 chassis, giving the silhouette its distinctive balance of firepower and mobility. This detailed plastic kit is designed for assembly and painting, with an assembly time of 600 minutes. Photo-etched parts bring extra definition to smaller exterior elements, while the metal gun barrel gives the main armament a clean, straight profile. Link and length tracks let the running gear show both the long upper and lower sections and the tighter curves around the wheels. A decals sheet for 4 versions supports different historical markings, including Regio Esercito and Wehrmacht service options shown in the reference artwork. The subject suits focused bench sessions where camouflage, insignia, and weathering can be built up step by step across the riveted armor and casemate surfaces. Once completed, the Semovente M43 da 105/25 Bassotto fits naturally into World War II armor collections, dioramas, or display shelves centered on the Italian front. Warning! Not suitable for children under 14 years.
RC servos
Servo CS-9, RC servo, waterproof metal gear
500502042€22.99
The CS-9 brings regular-size servo control to model builds that need quick response, a waterproof housing and a straightforward JR connection. Its black and blue case, top output shaft and 3-wire lead suit a wide range of RC installations where compact control hardware needs to translate radio commands into clean mechanical movement. Inside the housing, the metal gear transmission is built for repeated steering or control inputs, while the 9 kg rating and 0.1 speed support fast actuation in demanding hobby setups. The included servo horns expand the mounting options at the spline: a single-arm horn and a 4-arm cross horn provide different linkage positions, and the set also includes rubber grommets and a mounting screw for installation. The regular-size format makes the servo a useful choice across different model categories where a standard servo bay is part of the layout. Age 14 Years is stated for this servo. In RC cars, the CS-9 can handle steering duties where quick centring and firm linkage control matter through corners and surface changes. In boats, aircraft or robotics projects, the same servo format supports control surfaces or moving functions that rely on compact dimensions, a JR plug and waterproof construction. Warning! Not suitable for children under 14 years.
Military aeroplane models
Spitfire Mk. IX Aces Aircraft Model Kit 1:48
510002843€29.49
Spitfire Mk. IX Aces brings one of the best-known fighter aircraft in aviation history into a 1:48 aircraft model kit with a detailed plastic build and a strong Royal Air Force identity. The Supermarine Spitfire became an enduring symbol of British aeronautical production, and this version focuses on the Mk IX, the variant developed to answer advances from opposing fighters during the war. The full-scale aircraft combined a single-engine, low-wing layout with effective offensive armament, an elliptical wing and the powerful Rolls-Royce Merlin engine. Those defining features give the model its unmistakable silhouette and make the subject instantly recognizable on a workbench or in a display cabinet. The Mk IX entered production as the Spitfire line continued to evolve in aerodynamic configuration and engine development, creating a version known for performance that could meet the most modern German fighters on equal terms. Its connection with Royal Air Force aces adds another layer of historical focus to the finished build. With a recommended age of 14 Years, this kit suits builders looking for a military aircraft subject with clear historical weight and a classic wartime profile. Once painted and completed, the 1:48 scale format gives the Spitfire Mk IX a balanced presence for collection displays centered on World War II aviation Warning! Not suitable for children under 14 years.
Military aeroplane models
SR-71 Blackbird 1:72 Aircraft Model Kit
510000145€34.99
The Italeri SR-71 Blackbird in 1:72 scale brings the unmistakable lines of the high-speed reconnaissance aircraft into a build that carries real presence on the shelf. At 45 cm long, the finished model gives the pointed nose, broad fuselage and engine nacelles enough size to show the Blackbird silhouette clearly, while the Lockheed D-21 drone in the box adds the distinctive configuration named for this edition. This assembly kit is built around the aircraft's unusual form rather than a simple generic jet layout. The long body, swept wings and twin nacelle arrangement create a project with strong visual contrast between large airframe sections and smaller detail areas such as landing gear, panel parts and markings. Decals for 1 version provide U.S. Air Force insignia, serial numbers, stencil data and nose art, giving the finished aircraft a more specific operational look. Assembly time is stated as 600 minutes, which suits a slower, deliberate approach to fitting, painting and finishing. Paints and tools shown in the reference material are not included with the kit. On a workbench, the model offers a clear sequence of airframe construction, surface preparation and final marking placement. Once completed, the 1:72 scale format and 45 cm length make the SR-71 Blackbird with D-21 drone a strong centrepiece for an aircraft collection or display dedicated to Cold War aviation subjects.
RC helicopters
Starter Tyrann 230, RC helicopter, IR 2Ch RTF
500507164€20.99
The Starter Tyrann 230 brings compact helicopter flying into an easy indoor format with a 2-channel infrared control system, a 225 mm length and a low 31 g weight that keeps handling light and approachable. In cyan trim, the ready-to-fly layout creates a clear first step into RC flight while the switchable LED position indicators add visible orientation during movement. Left and right trim adjustment allows the flight path to be fine-tuned directly from the transmitter, which helps maintain cleaner hovering and steadier directional control in smaller rooms. The 180 mm rotor diameter gives the helicopter a balanced rotor footprint for controlled lift, while the 10 km/h speed limit keeps the pace manageable for learning basic manoeuvres. A 3.7 V 150 mAh LiPo flight battery powers the model, and charging runs through the included USB charger rather than a separate charging station. The set includes the ready-to-fly helicopter, the IR remote control system, the flight battery and the charger. 4 AA batteries are required separately. With a height of 97 mm, the helicopter stays compact enough for living rooms, hobby spaces or bedroom flight sessions where short take-offs, hovering practice and gentle turns are the focus. The combination of low weight, onboard lighting and trim control suits repeated indoor runs that build confidence with each battery cycle.
Model motorcycles
Suzuki RG500 XR27 Team H.B.S. 1978 Model Kit
510104644€69.99
The Italeri Suzuki RG500 XR27 Team H.B.S. 1978 brings a landmark 1970s racing motorcycle into 1:9 scale as a detailed plastic kit with strong visual presence and a clear motorsport identity. Fairing shapes, race bodywork and the compact proportions of a Grand Prix machine give the finished build a purposeful silhouette that stands out on a shelf or in a collection. The subject is rooted in the Suzuki RG 500, a competition motorcycle developed for 500 class racing and built around a 4-cylinder 500 cc 2-stroke engine rated at up to 90 HP. That background gives the model a specific mechanical story rather than a generic road-bike look. The kit draws on the 1978 racing version and uses waterslide decals to recreate period markings, sponsor logos and the number 7 layout seen on the bodywork and fairing sections. Assembly is required, and the stated build time is 600 minutes. Paints are required separately. On the workbench, the larger 1:9 scale gives space for careful handling during fitting, painting and decal application. Once completed, the motorcycle suits display in a cabinet, on a desk or alongside other racing subjects, where the 1978 livery, low racing stance and classic Grand Prix form can be viewed from multiple angles.
Model figures
The Knights XIth Century Crusaders Model Kit 1:72
510006009€10.99
The Knights XIth Century Crusaders from Italeri brings the armies of the First Crusade into 1:72 scale with a broad historical mix of mounted and foot troops. The set centres on heavy cavalry in chain mail armor with the large almond-shaped shields typical of the age, creating a strong medieval profile across battle lines, charges and command groups. Alongside the cavalry, the kit also represents infantry and crossbowmen recruited from various Christian European countries, giving the set a wider troop character than a mounted unit alone. The box content lists 9 horsemen and 25 figures, which supports denser formations, skirmish scenes and layered diorama layouts. The parts are supplied unpainted on sprues, so shield devices, banners, surcoats and horse caparisons can be finished in different heraldic combinations. Assembly is required, and the stated assembly time is 600 minutes. On a display base, the mix of rearing horses, advancing riders and foot soldiers with spears, shields and missile weapons helps build scenes with movement and contrast. In a historical collection, the set works as a focused 11th century force or as a larger crusader contingent placed around siege, march or open-field battle settings.
Model tanks
Tiger I Ausf. E Model Kit 1:56 with Zimmerit
510025755€21.99
The Italeri Tiger I Ausf. E model kit in 1:56 scale brings one of the most recognisable heavy tanks of World War II into a format that suits both display shelves and tabletop battlefields. At 14.2 cm long, the finished build carries the broad stance, long-barrelled main gun and layered running gear that define the Tiger I silhouette. This assembly kit uses 50 parts to shape the turret, hull and suspension into a compact military miniature with clear structural detail. Molded Zimmerit on the turret and hull gives the outer surfaces a textured finish that responds strongly to washes, dry-brushing and camouflage paint schemes. Decals for 2 versions support different marking choices, and the included figure adds scale contrast beside the vehicle in a small diorama setting. Assembly is required and takes about 600 minutes. Paints, glue and tools are required separately. On a gaming table, the 1:56 scale works naturally with other military miniatures and terrain pieces, while the finished tank also holds its presence as a standalone historical build. The combination of surface texture, alternate markings and compact dimensions makes this Tiger I Ausf. E a focused project for builders who enjoy WWII armour subjects with room for careful finishing work. Warning! Not suitable for children under 14 years.
Tyres & rims
Tire Insert 15 mm, accessory for 1:14 models
500907516€11.49
In 1:14 model building, the small parts inside the wheel assembly often decide how cleanly a setup comes together. These tire inserts in 15 mm format are made to sit inside compatible tyres and create the internal support layer that gives the mounted wheel its form. The foam construction fills the cavity between tyre and rim without adding unnecessary mass to the wheel assembly. That matters when a model is rolling, changing direction or settling after steering input, because the insert helps the tyre hold a more even profile instead of collapsing irregularly. The 15 mm size gives a concrete reference for matching the insert to the intended wheel setup, and the designation 907011/14 links the part to the corresponding application named in the data. As an accessory part rather than a complete vehicle, this is a focused workshop component for compatible 1:14 model use. It fits naturally into maintenance benches, rebuild sessions and fresh wheel assemblies where the internal foam layer needs replacement or a new set is being prepared. Age 14 Years
Military aeroplane models
Tornado GR. 1 RAG Aircraft Model Kit 1:72
510101384€18.99
The Italeri Tornado GR. 1 RAG model kit captures the unmistakable shape of the multirole Tornado in 1:72 scale, combining a twin-engine combat aircraft layout with the distinctive variable-sweep wing configuration. At 23.2 cm long when assembled, the finished aircraft brings a strong RAF strike-aircraft silhouette to a shelf, display case or Gulf War themed diorama. This assembly kit is based on the Tornado GR.1 used in low-altitude penetrating strike missions and reflects an aircraft type developed jointly by British, German and Italian companies. The subject carries clear historical context through its Gulf War service, including Royal Air Force operations from Bahrain and Saudi Arabia during Operation Granby in 1991. Decals for 4 versions open up different finishing directions, including aircraft-specific markings and nose art that give each build its own identity. The longer 600-minute assembly time suits a more involved modelling session, where painting, marking placement and careful handling of the swept-wing jet shape become part of the appeal. On the bench, the 1:72 format works well for builders who enjoy military aviation subjects with authentic proportions and manageable display size. Once completed, the Tornado GR. 1 RAG fits naturally into modern combat aircraft collections, historical air power displays and RAF-focused model line-ups.
Model tanks
Tornado GR.1 Desert Storm 1:32 Model Kit
510002521€129.99
Tornado GR.1 Desert Storm brings the British Royal Air Force strike aircraft into a 1:32 model kit format with a strong focus on the aircraft used during the 1991 Gulf War. The larger scale gives the twin-engine, two-seat layout room to stand out, while the swept wing profile gives the finished aircraft a recognisable combat silhouette. The original Tornado project grew from a collaboration between Italy, Germany and the United Kingdom to create a high-performance multirole combat aircraft. In GR.1 form, the aircraft served as the British Royal Air Force designation of the Tornado IDS, the Interdictor/Strike variant developed for attack missions. Its variable-geometry wings were part of a design shaped for low-altitude supersonic strike work and terrain-following flight, giving this subject a clear technical identity beyond its Desert Storm markings. The 14 years marking places this build in a more advanced model-making range. On the bench, the 1:32 format gives space to appreciate the aircraft's long fuselage, two-seat cockpit arrangement and mission-driven wing geometry as the build takes shape. Once completed, the GR.1 theme and Desert Storm setting give the aircraft a strong presence in military aviation displays centred on Royal Air Force subjects or late 20th century combat aircraft.
RC helicopters
Toxic Spider 340, RC helicopter, 100% RTF
500507160€39.99
The Toxic Spider 340 100% RTF combines a coaxial rotor system, intelligent gyro electronics and a compact indoor format in one ready-to-fly RC helicopter. Black and green styling, illuminated LED headlights and a top speed of 10 km/h give each flight a crisp, technical presence as the model lifts from its landing skids and settles into stable hovering. Its 2.4 GHz remote control system works with 3.5 channels, allowing coordinated inputs for ascent, descent, turning and directional correction. The aluminium tail boom adds a light, rigid rear structure that supports balanced handling in the air. A 3.7 V 400 mAh LiPo flight battery powers the helicopter for up to 8 minutes, giving enough time for repeated take-offs, short circuits and hover practice. Included in the set are the ready-to-fly model, the remote control system, the LiPo flight battery, a USB charger, 3 transmitter batteries and instructions. The age marking is 12 years and up. Indoor sessions suit the Toxic Spider 340 especially well, whether the focus is on learning steady hover control in a living room or linking smooth turns through open space in a hallway. With the charging gear and transmitter batteries already included, the set brings the key flying components together in one box for immediate RC action after charging.
Model motorcycles
Triumph 3HW model kit motorcycle in 1:9 scale
510007402€41.99
The Italeri Triumph 3HW brings a British wartime motorcycle into 1:9 scale, turning a historic dispatch machine into a detailed assembly project with real display presence. At 23.1 cm long, the finished model has enough size for the spoked wheels, exposed engine, sprung solo saddle and rear luggage setup to read clearly from shelf distance while still rewarding close work at the bench. The subject is based on the Triumph 3HW, a military adaptation of the civilian Tiger 80, and the kit reflects that service background through the bike's practical field equipment and period layout. Parallel forks, the overhead valve engine concept and the communication role of dispatch riders give the build a clear historical identity beyond a generic vintage motorcycle. Decals for 4 versions expand the finishing options with registration numbers, unit-style insignia, gauge graphics and service markings, so the final look can be tuned toward different wartime appearances. Assembly is required, and the stated build time is 600 minutes. Once completed, the model suits a display focused on military transport, British equipment or classic motorcycles from the 2nd World War era. The larger 1:9 scale also supports careful painting sessions, weathering work and precise decal application, making the Triumph 3HW a focused project for builders who enjoy historical subjects with visible mechanical detail.
Model figures
Union Cavalry 1863 The blue jackets Model Kit
510006013€10.99
Union Cavalry 1863 The blue jackets is a 1:72 assembly kit from Italeri that brings a late American Civil War cavalry unit into miniature form. The set focuses on the Union troops active in 1863 and presents them with the characteristic short jacket without epaulettes, creating a clear period silhouette across mounted and standing poses. The figure selection combines 15 riders with 2 additional figures and 2 horses, giving the scene room for both movement and command detail. Weapons and uniform elements are tied closely to the historical subject: Sharps and Smith carbines, sabres, and the Mc Clellan or chasseur hat all appear in the sculpted equipment. The unpainted parts arrive as an assembly kit, so the finish can follow a chosen regiment style, weathering approach or diorama palette. Reference imagery supplied with the set shows paint guidance for uniforms, horses and equipment, helping the blue coats, leather tack and metallic details read clearly once completed. At 1:72 scale, the finished figures fit naturally into battlefield layouts, camp-edge scenes or larger American Civil War collections. The stated assembly time is 600 minutes, making this a build that rewards careful preparation, painting and placement across a wider historical setting.
Model figures
Union Infantry American Civil War Model Kit 1:72
510006177€10.99
Union Infantry American Civil War Model Kit 1:72 brings a full formation of Civil War soldiers into a compact scale that suits historical displays, painted collections and battlefield dioramas. With 50 unpainted figures in the box, the set gives enough troop density to stage advancing lines, command groups and scattered combat positions across a single scene. The sprues show a broad mix of infantry roles and battlefield movement. Riflemen appear in standing, kneeling and advancing poses, while other figures carry a flag, beat a drum or lead with a drawn sword. That mix helps a layout avoid a repeated parade look and instead build the uneven rhythm of an active engagement. Uniform references follow Union service dress, with the typical blue jacket and officers' longer redingote-style coat noted in the source data. Weapons and field equipment such as rifles, bayonets, belts and canteens add further period detail for painting and placement. At 1:72 scale, the set works well for land battle scenes linked to Bull Run, Antietam or Gettysburg, all named in the source material. The 600-minute assembly time marks this as a longer project suited to careful trimming, painting and arranging of the figures before they take their place on a base, shelf or larger historical terrain setup. Age 14 Years+
Model trucks
US CLASSIC WESTERN STAR 1:24 Truck Model Kit
510003915€59.99
The 1:24 US CLASSIC WESTERN STAR from Italeri brings the character of a classic American highway tractor into a detailed scale build with a finished length of 34.0 cm. Its long-nose layout, sleeper cab profile and heavy-duty road presence give the model a strong display look that stands out on a shelf or in a collection. Western Star began building industrial vehicles in 1967, and this kit draws on the marque's highway truck tradition with a focus on the Classic Western Star 4964. The build uses a detailed assembly format that suits model makers who enjoy working through a full construction project, with an assembly time of 600 minutes stated in the data. The 1:24 scale gives smaller exterior details room to read clearly, from the grille area and fuel tank shapes to the vertical exhaust stacks and cab accessories. A super decals sheet expands the finish with company markings, warning labels, dashboard graphics and alternative license plate details that help the truck take on a more authentic road-going identity. Once assembled, the model fits naturally into a display lineup of transport and truck subjects, and it also rewards a careful paint finish on the body, trim and mechanical sections. Cement, tools and paints are required separately.
Model tanks
US M8 Greyhound Model Kit 1:35 Scale Build
510006364€25.99
The Italeri 1:35 US M8 Greyhound captures a key American armored car from World War II as a detailed scale model kit with the distinctive 6-wheel layout, turret-mounted 37 mm cannon and compact reconnaissance profile. In a finished display, the angular hull, military markings and low, purposeful stance give the vehicle a strong presence drawn from wartime field service. Developed for advanced reconnaissance and troop support, the M-8 Greyhound brought heavier armament and increased protection than earlier scout cars, and this kit reflects that shift through its armored body form and turret arrangement. The subject saw service on the Italian front from Monte Cassino to Anzio and later took part in the D-Day operations in June 1944, giving the build a clear historical setting for paint and weathering choices. The box art notes figures are not included, keeping the focus on the vehicle itself. Assembly kit contents are provided, while paints, cement and tools are required separately. On the workbench, the 1:35 scale format gives enough room to handle surface detail, wheel parts and markings with care during painting and final finishing. Once completed, the model suits military collections, diorama scenes or a standalone display that highlights the speed-focused design of this widely used Allied armored car. Warning! Not suitable for children under 14 years.
Military helicopters
V-22 OSPREY Tilt Rotor Aircraft Model Kit 1:72
510001463€29.99
The Italeri V-22 OSPREY Tilt Rotor brings one of the most distinctive modern military aircraft concepts into a 1:72 scale build. Its tiltrotor layout combines vertical take-off and landing capability with the flight profile of a propeller aircraft, and this kit captures that character through the long fuselage, high-mounted wing, large nacelles and 3-blade rotors. The subject represents the Bell Boeing V-22A Osprey, a design developed over more than 20 years before entering operational use with United States armed forces units. The aircraft is powered by 2 Rolls-Royce T406-AD-400 engines rated at 6,150 HP each, and the full-size aircraft exceeds 500 km/h in horizontal flight. In the kit artwork and marking references, the aircraft appears in U.S. Marines and test configurations, with decal placement and paint guidance for 3 versions. The assembly documentation also indicates a 20 g internal weight during construction, adding a practical detail to the build process. With a stated assembly time of 600 minutes, this assembly kit suits model builders aged 14 Years and up who enjoy a longer aircraft project with painting and decal work as part of the finish. On the bench, the rotating-engine silhouette, military markings and multi-view paint references give the completed model a strong presence whether built as an operational test aircraft or an airshow version.
Model trucks
VOLVO F-16 Globetrotter model kit 1:24
510003923€55.99
The 1:24 VOLVO F-16 Globetrotter model kit brings a classic long-haul tractor unit into a display-friendly 24.0 cm format. Italeri represents the 2-axle tractor variant with the high GLOBETROTTER cab, capturing the tall cab-over stance, prominent front grille and the character of a late-1980s heavy truck built for distance work. The full-size Volvo F-16 was launched in 1988, around 10 years after the F-12, and stood out with a 6 cylinder turbo-compressed 16000 cc Intercooler engine rated at 465 HP at 1200 rpm. That background gives the model a clear technical identity beyond its shape alone. The assembly kit focuses on the truck itself and supports a detailed finish through exterior parts and a broad decal sheet. Markings cover dashboard instruments, VOLVO and INTERCOOLER branding, Globetrotter visor graphics, speed signs, country ovals and several regional license plate options, so the completed truck can be finished with a distinctly international road-haul look. With an assembly time of 600 minutes, the build leaves space for careful painting, decal placement and final presentation. Paints, cement and tools are required separately. On a shelf, desk or in a model truck collection, the high-roof cab, stripe graphics and classic tractor layout give the finished VOLVO F-16 Globetrotter a strong period presence.
Model trucks
Volvo F12 Intercooler Low Roof Model Kit 1:24
510003957€62.99
The Italeri Volvo F12 Intercooler Low Roof model kit captures a classic European tractor unit in 1:24 scale, centred on the compact low-roof cab that made this configuration a familiar sight on long-distance routes in the late 1970s and early 1980s. As a detailed plastic assembly kit, it focuses on the proportions and equipment of the F12 rather than a simplified snap-together format. The build develops through a full truck structure with chassis sections, cab components, interior parts and mechanical assemblies. The instruction material shows a separate engine area, radiator and fan parts, rear axle construction with leaf springs and driveshaft, plus a cab interior with seats, steering wheel and dashboard decals. Seven tyres are included for the tractor layout and spare wheel detail. Finishing options extend the visual range with multiple liveries, including Royal Black, Volvo White striped livery and German Green - Orange livery, supported by waterslide markings for badges, registration plates and country identifiers. With 600 minutes assembly time, this kit suits a measured bench session where painting, decal placement and subassembly work can be handled step by step. The finished truck works well as a display centrepiece alongside other 1:24 commercial vehicle builds, and the different marking options support distinct shelf presentations from the same Volvo F12 base. Assembly kit. Age 14 Years.
Model trucks
Volvo F16 Globetrotter Truck Kit with Tail Lift
510003945€69.99
The Italeri 1:24 Volvo F16 Plane m. Hebebuhne captures a classic 1988 transport truck in a format that gives the cab, chassis and rear body room to stand out. At 37.5 cm long, the finished model carries the tall Globetrotter cab, the canvas-covered load area and the rear lift platform with a strong road-going presence that suits truck collections and logistics dioramas. This assembly kit focuses on the Volvo F16 configuration with a 6-cylinder truck theme, a sturdy frame concept and the body style used by medium and long-range operators. The rear section is shaped around a hydraulic loading platform, so the model does not stop at the cab alone and instead reflects the loading and unloading role of the full vehicle. The build also gains visual depth from the included decal sheet, which covers Volvo branding, F16 Intercooler markings, Globetrotter lettering, dashboard graphics, country identifiers and multiple registration options. That range of markings helps the finished truck look more specific from the grille to the rear body. Assembly is required, with an indicated build time of about 600 minutes. Paints are required separately. Once completed, the model suits display in a roadside freight scene, a commercial vehicle lineup or a dedicated 1:24 truck collection, where the curtain-sided body and tail lift set it apart from a standard tractor unit or box truck.
Model trucks
VOLVO FH Plat Dak 1:24 Truck Model Kit
510003962€79.99
The 1:24 VOLVO FH Plat Dak model kit captures the look of Volvo's FH III tractor unit with the low-roof cab configuration and the clean, aerodynamic lines of a modern heavy truck. As an assembly kit from Italeri, it turns the distinctive front grille, cab shape and chassis layout into a detailed scale build with a strong road-going presence once completed. The cabin and interior are newly detailed, so the build does not stop at the outer shell. Dashboard, seating and cab structure add visible depth behind the glazing, while the driver door can be finished open or closed to change how much of that interior remains in view. The radiator grille also offers an open or closed build option, adding another visible choice at the front end. Beneath the cab, the fully detailed engine and frame give the model mechanical substance as well as exterior form. Photo-etched parts sharpen selected details, and rubber tyres bring a more realistic finish to the wheels than rigid moulded alternatives. With a scale of 1:24 and an assembly time of 600 minutes, this truck build suits longer bench sessions where cab, chassis and front-end details can be developed step by step. Paints and cement are required separately. Warning! Not suitable for children under 14 years.
Model trucks
Volvo VN 780 Tractor Truck 3Axle Model Kit
510003892€70.99
The Italeri Volvo VN 780 Tractor Truck 3Axle model kit brings a distinctive American long-haul tractor into 1:24 scale, combining the tall sleeper cab silhouette with a finished model length of 34.5 cm for strong shelf presence. Based on the Volvo VN 780, an evolution of the NH 12 series, the subject reflects a truck developed for the American market and shaped around extended road use. The cab design is the visual centre of the build, with sleeping facilities and the broad proportions typical of a highway tractor built for long-distance routes. The restyled body gives the model a modern road-going character, while the improved engine theme from the original vehicle adds context for builders who enjoy subjects tied to real transport design. The assembly kit format leaves room for painting, detail work and careful decal placement across the cab, trim and interior graphics. Radio gear, a battery pack, a charger and paints are required separately. On the workbench, the 3-axle configuration creates a substantial truck stance, and the chrome-effect details help frame the bold show-truck look once the bodywork is finished. After assembly, the model suits display in a truck collection, a transport-themed diorama or a line-up of modern commercial vehicles where the sleeper cab and American-market styling can be seen at a glance. Warning! Not suitable for children under 14 years.
Military ship models
Vosper 72''6' MTB 77 Model Kit 1:35 Scale
510005610€114.99
The Italeri Vosper 72''6' MTB 77 model kit brings a fast Royal Navy motor torpedo boat into 1:35 scale with a finished length of 63.1 cm. The long, narrow hull, central bridge structure and armed wartime layout give the completed build a strong waterline presence whether placed on a shelf or worked into a naval diorama. This assembly kit is based on the Vosper 72'6'' class used during the Second World War for coastal patrol and anti-submarine support in the North Sea and English Channel. The full-size craft ran on 3 engines with a combined 4,200 hp and reached speeds close to 40 knots or 70 km/h, giving the subject its distinctly aggressive proportions. Italeri uses 100% new moulds for this release, and the kit also includes a photo etched fret for finer structural details. Decals for 3 versions open up different finishing directions across the same historic boat. Figures are not included. The subject suits builders drawn to naval history, deck equipment and compact combat craft with a clear operational role. During painting and finishing, the torpedo boat format offers room to work on hull markings, bridge details and weapon placements while keeping the overall footprint manageable at 63.1 cm.
RC speed boats
Waveracer Jet, RC boat, 2.4GHz 100% RTR
500108062€89.99
The Waveracer Jet brings compact RC boat action to calm water with a jet drive, a Type 390 brushed motor and LED lighting on the deck. At 442 mm long, 96 mm wide and 85 mm high, the hull combines a slim profile with a low weight of 599 g, giving the boat a lively, controlled feel across ponds, lakes and sheltered stretches of water. The 100% RTR format arrives pre-assembled with a 2.4 GHz remote control, a 7.4 V 2000 mAh Li-Ion battery, a USB charger, 3 x LR06 batteries and a boat stand. Integrated water cooling supports the electric motor during running, and the waterproof upper deck opens quickly through quick-release fasteners when access is needed. Water-protected electronics keep the key control components shielded during use, while the digital proportional system translates steering and throttle inputs with fine control rather than fixed steps. The boat reaches up to 20 km/h, runs for 12 minutes and charges in 3.5 hours. Ages 14+ marks the recommended age. On shallow water, the jet drive helps the boat stay capable where exposed propeller setups are less practical, and the rubber bow protector adds a plain physical buffer at the front during close approaches and recovery at the bank.
Basic accessories
Windshield wiper Set, model accessory, 1:14
500907369€7.99
Small exterior fittings often decide whether a scale build reads as basic or convincingly finished, and this 1:14 Windshield wiper Set targets exactly that visual step. Designed as a model accessory, it brings the characteristic wiper detail to the windscreen area and gives 1:14 vehicle projects a more complete front-end appearance. Within model-building work, details like wipers help define the cab section and break up large clear surfaces with the kind of hardware seen on full-size vehicles. The 1:14 scale keeps the set aligned with matching truck and vehicle builds in that format, making it suitable for fresh assemblies, visual upgrades or replacement work on existing models. As a dedicated accessory rather than a structural component, the set is aimed at finishing and refinement where smaller parts influence the overall impression of the model. It suits workshop sessions focused on exterior detailing, custom conversions and careful restoration of worn or incomplete builds. On a display shelf or during driving sessions, the added windscreen hardware helps the model present a more resolved and realistic look.
LiPo batteries
X4 Cage Autostart battery, 3.7V LiPo pack
500608275€11.99
The X4 Cage Autostart battery brings the specified 3.7 V LiPo power pack and 220 mAh capacity needed for compact RC use into one small-format unit. Its silver pouch-cell format, red and black connection leads, and white 2-pin plug create a layout that fits neatly into model setups where every millimetre of space counts. With an energy rating of 0.81 Wh, this rechargeable battery is defined by clear electrical data rather than vague compatibility claims. The cable-mounted connector supports straightforward installation in matching systems, and the lightweight pack format suits small vehicle platforms and model electronics that rely on a compact power source. The visible warning tag attached to the lead marks a handling instruction directly on the battery assembly, keeping the operating note close to the connector itself. Batteries are not included beyond this listed battery pack. In use, the pack suits replacement duty for the X4 Cage Autostart and similar compact applications where the required voltage and connector format need to match exactly. For hobby benches, pit boxes, or regular running preparation, it adds a clearly specified LiPo option that keeps compatible RC equipment ready for the next session.
RC quadcopters
X4 Quadcopter 210, quadcopter, 2.4G 100% RTF
500507176€39.99
The X4 Quadcopter 210 brings compact RC flying and quick stunt action into a 210 x 140 x 45 mm format that sits easily in one hand and lifts off with a light 44 g airframe. Its 3 speed settings, automatic altitude control and intelligent 6-axis gyroscope function create a stable base for short practice flights, low hovering passes and tighter turns in open spaces. The 2.4 GHz remote control system uses 4 frequency channels for steering inputs, while headless mode keeps the control logic easier to follow when the nose changes direction in flight. Aerobatic mode adds flips for more dynamic manoeuvres, and the Coming Home function returns the quadcopter toward the take-off point at the press of a button. The included set contains the ready-to-fly model, 2.4 GHz remote control system, 3.7 V 300 mAh LiPo flight battery, USB charger, 3 x AAA transmitter batteries, spare rotor blades and instructions. Flying time reaches 9 minutes, with speeds of up to 25 km/h. Age 8+ marks the recommended age for use. The compact dimensions and complete RTF setup suit quick sessions in the garden, at the park or across larger indoor areas where hovering, turns and flips can be practised in short bursts.
RC servos
XS Chassis Servo for RC Models 15 kg
500502069€21.99
The XS Chassis 15 kg servo brings a defined control component to RC model builds where compact installation and solid actuating force matter. With its XS chassis designation and 15 kg rating, it suits layouts that need a servo sized for tighter chassis architecture while still delivering clear mechanical input through the steering or control linkage. Within an RC setup, the servo converts radio commands into physical movement at the chassis, making it a central part of how steering or other linked functions respond in use. The data identifies it as a servo for the XS chassis range, placing it in the core hardware area of model maintenance, replacement and tuning rather than in decorative accessories. This makes it relevant for rebuilds, repairs and planned upgrades where a defined force rating is part of the selection process. Batteries are not included. On the bench, the servo suits projects that call for a compact control unit matched to model hardware in the Models & Accessories field. It also fits routine spare-parts planning for RC collections where a dedicated chassis servo keeps running models ready for the next session.
Model tanks
Zündapp KS750 with Sidecar Model Kit 1:35
510000317€11.99
Italeri Zündapp KS750 with Sidecar captures a well-known military motorcycle combination as a 1:35 scale plastic model kit with a finished model length of 6.6 cm. The compact format gives the motorcycle, sidecar and crew a clear place in vehicle collections and historical diorama scenes while keeping the build focused on fine mechanical detail. The kit contains 3 figures, adding more than a standalone vehicle silhouette to the finished result. Seated and standing crew poses help shape a fuller field scene around the sidecar outfit, while the molded parts support careful painting of uniforms, equipment and vehicle details. The decal sheet provides multiple registration and insignia options, including versions for Italy 1944/45 and Normandy 1944, plus smaller technical markings such as tyre pressure stencils. This creates room for a more specific historical finish rather than a single fixed appearance. Assembly is required, with a stated assembly time of 600 minutes. The build suits ages 14 years and up and works well as a longer bench project where painting, decal placement and figure arrangement all contribute to the final presentation. Assembly kit included.
LiPo batteries
7.4V 5000mAh LiPo Battery, spare battery, XT90
500608284€47.99
This 7.4 V LiPo spare battery adds a straightforward power option for compatible RC setups that use an XT90 connector. With 5000 mAh capacity, it is built as a replacement pack for models that need a 2S battery in this specification, keeping the focus on matching voltage, connector type and battery format. The pack is stated as suitable for all 2S and 4S models with an XT90 connector, which gives a clear compatibility reference for hobby use across matching Carson model ranges. The 60C rating shown in the product data adds another technical point for enthusiasts comparing replacement packs for current delivery. The battery is supplied as 1 spare battery, so it can step in for an existing pack or expand the rotation for longer sessions with compatible vehicles. As a LiPo battery, it belongs in setups designed for this battery type and the stated 7.4 V specification. In practice, this spare pack suits workshop shelves, race-day kit bags and regular running sessions where a charged replacement keeps a compatible model ready for the next run. A charger is required separately. Warning! Not suitable for children under 14 years.
Li-ion batteries
XS Line Tuning Battery, replacement battery, 7.4 V
500608308€19.99
The XS Line Tuning Battery brings a defined 7.4 V Li-Ion power source to compatible Carson Modelsport vehicles and combines 2600 mAh capacity with 19.24 Wh in a compact replacement format. Built as a battery pack with T-Plug and XHP connector, it is matched to the connection layout named for the XS Line. Its stated fitment covers the 1:10 XS Stadium Fighter 100% RTR in blue and orange as well as the 1:10 XS Offroad Fighter Cage 100% RTR in turquoise and rouge. That makes it a focused choice when an existing battery needs replacing or when a second pack is needed for the same compatible platform. The Li-Ion format defines the battery chemistry, while the 19.24 Wh rating adds a clear energy figure alongside the voltage and capacity data. The pack is also marked as fast-charging, with a maximum charging current of 1 C or 2600 mA. In workshop use, the connector combination helps keep the battery matched to the specified XS Line vehicles rather than a broad, uncertain range. For running sessions with the listed 1:10 models, the battery serves as a direct power component built around the exact voltage, capacity and connector details given in the data. Warning! Not suitable for children under 14 years.
Li-ion batteries
FE-Line Battery, RC battery, 7.4 V 1500 mAh
500608199€21.99
The FE-Line battery brings a dedicated 7.4 V power source to compatible Carson RC setups, with 1500 mAh capacity and a Tamiya plug matched to FE Line use. The black Li-Ion pack with attached cables is built as a ready battery unit, making it a clear choice when an existing pack needs replacement or an extra charged unit is kept on hand for the next run. Its lithium-ion cell format combines the stated voltage and capacity in one compact pack, while the cable set includes the main power lead and an additional small connector integrated into the harness. The label identifies the pack as a high performance Li-Ion battery pack, and the visible charging information states a maximum charge current of 1C or 1500 mA. The pack is intended for Carson RC models in the FE Line, so the electrical specification stays aligned with that series rather than relying on a universal fit. Delivery includes the Accu-pack Li-Ion battery. In workshop use, the pack suits routine battery rotation between driving sessions, whether a model is being prepared for a fresh run or an older battery is being replaced with the same voltage and connector standard. The 14 years marking is stated in the product data, and the battery format fits naturally into hobby-focused RC maintenance and running setups.
Li-ion batteries
7.4V 500mAh LiIon Battery, spare battery, JST
500608290€9.99
A spare battery keeps compatible RC vehicles ready for the next run, and this LiIon pack is built around the exact core figures that matter: 7.4 V, 500 mAh and a fitted JST plug connection. The compact battery format suits Carson RC Sport models that use this specified power source. The pack is listed as suitable for the 1:12 Glow Devil 2.4GHz 100% RTR red and the 1:12 Glow Rider 2.4GHz 100% RTR blue. In addition to the voltage and capacity, the battery carries a 3.7 Wh energy rating and uses rechargeable LiIon chemistry. The attached lead and connector provide the physical link to the vehicle's matching battery socket, which is the key point when replacing a worn or depleted pack. As a dedicated spare battery, it supports quick battery swaps between driving sessions without changing the vehicle setup. Kept charged and stored with the connector unplugged, a second battery pack can simplify preparation before track time or casual RC driving. For hobby benches, pit bags or shelf storage with compatible 1:12 models, this battery adds a straightforward replacement option when the original pack needs backup or renewal. Warning! Not suitable for children under 14 years.
LiPo batteries
11.1V 4500mAh 60C LiPo Battery, RC battery
500608283€62.99
This 11.1 V LiPo spare battery brings a focused power upgrade to compatible RC setups, pairing 4500 mAh capacity with a 60C discharge rating for model use. The XT90 plug connection keeps the fit aligned with vehicles that already use this connector, while the hardcase format shown in the product image suits the demands of RC running and transport. Beyond the headline figures, the pack is built around a rechargeable LiPo format with 49.95 Wh stated on the label and a maximum discharge current of 270 A. The product image also shows a white balance connector alongside the main XT90 lead, supporting balanced charging with suitable equipment. Charging data on the label states a maximum charging current of 4.5 A, giving experienced hobby users a clear technical reference for setup and handling. As a replacement battery, it is intended for all 3S and 6S models with XT90 connector as stated in the product data. In practice, this battery fits naturally into workshop shelves, pit bags and regular running sessions where a compatible RC vehicle needs a fresh power pack on hand. Age marking: 14 Years. Warning! Not suitable for children under 14 years.
RC remote controls
Reflex Wheel Pro 4, RC radio set, 2.4 GHz
500500112€109.99
The Reflex Wheel Pro 4 electric set brings wheel-style RC control, core onboard electronics and matched power components together in one package for 2.4 GHz model operation. With a 3-channel transmitter, a 4-channel mini receiver, a 6 kg CS6 servo and a 7.2 V 3000 mAh NiMH drive battery, the set covers the central functions needed to equip an electric RC vehicle for hobby use. The transmitter runs on 3.6 to 4.5 V and uses an ergonomically angled 4° steering wheel position for a natural hand layout during longer driving sessions. Channel 3 can be programmed as a switch or button function for a servo, adding another control option beyond steering and throttle. The receiver power supply supports 3.5 to 10 V without a BEC, and the nano receiver is waterproof for installation in models exposed to wet running conditions. A ball-bearing control unit supports precise steering input, while the LED battery status display keeps the charge state visible during setup and use. The included charger is designed for NiMH packs with 4 to 8 cells and delivers up to 2 A output power. Uni connector system compatibility for Futaba and Graupner-J/R broadens integration with existing RC equipment, making the set a strong base for electric model builds, upgrades and replacement radio installations. Age 14+ Warning! Not suitable for children under 14 years.
Li-ion batteries
Demolisher JST-4 Li-Ion Battery, RC accessory
500608278€15.99
The Demolisher JST-4 Li-Ion battery brings a focused power upgrade to compatible RC running with 7.4 V output, 500 mAh capacity and a compact rechargeable format built for model use. Its 3.7 Wh energy rating and shrink-wrapped pack layout keep the setup neat inside the vehicle while the red and black lead routes power through a JST-4 connection. This battery is designed as an accessory for the Demolisher and gives hobby users a clearly specified replacement or spare pack rather than a vague universal fit. The technical data names a maximum charging current of 0.5 A, making charger matching more precise during workshop prep. The pack is a Li-Ion type, so it suits RC setups where low pack weight and rechargeable convenience matter during repeated driving sessions. Because the battery is not included with every vehicle configuration, this separate pack can also serve as a practical second unit for rotation between runs. In use, the battery fits naturally into the rhythm of charging, connecting and heading back out with the model once the previous pack is depleted. It also works well as a bench spare for maintenance days, test drives and quick power swaps when a compatible Demolisher setup is already in service. Warning! Not suitable for children under 14 years.
Li-ion batteries
Tenzu, replacement battery, 7.4V Li-Ion pack
500608316€19.99
The Tenzu replacement battery is specified as a 7.4V Li-Ion pack with 1200 mAh capacity, giving compatible RC vehicle setups the exact electrical format named in the product data. As a dedicated spare battery, it fits naturally into hobby use where one pack is in the model while another is prepared for the next session. Its ShortDescription identifies the pack directly as a Tenzu battery, while the replacement designation makes its role clear within an electric RC setup. The 7.4V voltage and 1200 mAh rating provide concrete reference points when matching the battery to the required system, avoiding guesswork around the power format. Because this is a battery-only offering, the focus stays on the core specification rather than bundled extras. The Li-Ion construction places it in the rechargeable battery category used across many modern RC applications. In practice, this battery suits the bench as a ready spare and the field as a quick swap option for compatible models. The 14 Years age marking is stated in the data, aligning this power component with hobby-oriented RC use rather than toy-style entry products.
LiPo batteries
3.7V 300mAh LiPo Flight Battery, RC accessory
500608245€18.99
This 3.7 V 300 mAh LiPo Flight battery is built for compact RC applications that need a small rechargeable power source with clearly stated output. The 1.11 Wh rating, red and black lead wires, and white 2-pin connector make its electrical layout easy to identify at a glance. As an RC accessory, it focuses on the essentials: a lithium polymer cell, a wired connection, and a plug format suited to compatible small-scale electronics. The slim battery pack shown in silver foil with amber tape is shaped for installations where space is limited and cable routing needs to stay tidy. That makes it a practical replacement when an existing battery has reached the end of its service life, and a useful spare when one charged pack is not enough for the full session. The printed specification label keeps voltage and capacity visible during setup, charging, and storage. In use, the battery fits naturally into flying or driving sessions with compatible Carson RC models that require this format. Kept as a second pack in the workshop or field box, it helps keep compatible models ready for the next run once the first battery is back on charge.
NiMH batteries
7.2V 3000mAh NiMH Race Battery, RC battery
500608224€28.49
Built for RC use, this 7.2 V NiMH race battery combines a 3000 mAh capacity with a format suited to electric model applications. The pack is designed for RC vehicles and can also be used in other model building setups, giving hobby benches a practical power source for regular running and replacement needs. The nickel-metal hydride cell chemistry offers a rechargeable battery option for compatible systems, while the Tamiya connector system provides the matching plug format for suitable models and electronics. A maximum charging current of 3 A supports faster charging when used with an appropriate charger. The pack is also designed for high current discharge, which makes it suitable for applications that call for stronger power delivery under load. Age marking: 14 years. On the track, in the pit area, or as part of a prepared spare setup, the battery pack fits naturally into RC routines where charged packs need to be swapped and returned to service efficiently. For workshop use beyond cars, it also suits model building applications that require a 7.2 V rechargeable power source with Tamiya connection.
Li-ion batteries
Li-Ion Battery Pack JST-4, RC battery, 7.4V
500608279€17.99
This 7.4 V Li-Ion battery pack brings compact rechargeable power to compatible RC crawler models and adds a practical spare or replacement pack to the bench. With 1200 mAh capacity and 8.88 Wh, it supports electric vehicle setups that need a matched battery format for regular running sessions and planned swaps between charges. The pack uses a JST-4 connection and a 3-wire lead, as shown on the battery harness, for integration with compatible Carson RC Sport crawler systems. Its stated maximum charging current is 1.2 A, which matches the 1 C charging rate printed on the pack. The shrink-wrapped battery format keeps the cells grouped in a tidy rectangular pack that fits the compact layout typical of RC chassis installations. Charge before use is stated on the pack, and the connector should be unplugged for storage. In a hobby setup, this battery works well as the ready-charged pack kept beside the charger for the next run, or as the replacement power source that gets a crawler back on the trail after one pack is spent. The clearly marked voltage, capacity and charging data also make pack matching easier when organising compatible RC vehicle electronics. Warning! Not suitable for children under 14 years.
RC receivers and accessories
Reflex Wheel Pro 4 WP Receiver, RC 4-Channel
500501548€29.99
The Reflex Wheel Pro 4 WP is a compact 2.4 GHz 4-channel receiver built for RC models that need dependable control hardware in a small format. With a 35 x 30 x 13 mm housing and a weight of about 11 g, it suits installations where available chassis space is tight and electronics placement matters. The 4.8-8.4 V power range supports integration into common RC vehicle electrical setups, while the clearly arranged channel ports keep the connection points easy to identify during installation. The receiver layout provides connections for CH1, CH2, CH3 and AUX, giving model builders a practical basis for steering, throttle and added functions within one compact unit. An external antenna wire extends from the housing for radio reception, and the included plug supports binding or setup functions as shown in the supplied configuration hardware. The 2.4 GHz system suits modern RC control environments where clean component organisation and straightforward wiring are part of a well-planned build. In workshop use, the small footprint helps when fitting electronics into narrow radio boxes or compact interior layouts. For replacement, upgrade or fresh model projects, this receiver adds a focused control component that can be integrated without taking over the chassis layout. The age marking is 14 years and over.
RC servos
Servo CS-13, RC servo, 13 kg waterproof
500502025€25.99
The Servo CS-13 brings regular-size dimensions, 13 kg torque and a waterproof design into one compact control component for RC models. Its 4.8-6 V operating range and JR connector suit common hobby electronics layouts, while the output shaft works with the included servo horns to transfer movement into steering, throttle or brake linkages. Inside the housing, metal gears handle the servo's drive path and support consistent motion under load. The set includes a cross horn, a single-arm horn, rubber grommets and a mounting screw, so different linkage positions and installation layouts can be matched to the model's setup. The 3-wire lead connects the servo to the control system, and the regular-size format suits many model applications where a standard servo footprint is required. The waterproof construction expands its use to builds that face wet ground or damp running conditions. In an RC car, the CS-13 can be installed for steering input or throttle and brake control, depending on the model layout. It also fits other hobby applications that use mechanical linkages and a JR plug connection, making it a practical choice for repairs, upgrades or fresh builds from age 14 years. Warning! Not suitable for children under 14 years.
Chargers & charging cables
1:87 USB Four Point Charger Unit, charger
500504145€39.99
The 1:87 USB Four Point Charger Unit brings a tidy charging hub to compact model fleets, with 4 charging outputs rated at 4.2 V / 50 mA each and a single 5 V / 1 A USB input. Set on a shelf, desk, or workbench, the station keeps several compatible miniature vehicles gathered in one clearly organised place instead of spreading chargers and cables across the hobby area. Its four-point layout is built for enthusiasts who rotate multiple 1:87 models between use and display. The charging station is included, along with the instruction manual, and the USB-powered format keeps the setup straightforward when a standard USB source is available. The 1:87 designation makes it a focused accessory for small-scale vehicle collections rather than a general charger for mixed formats. With several charging positions arranged on one base, the station supports a more structured routine for storing, charging, and preparing compatible models. In a collection cabinet, it creates a dedicated service point for miniature vehicles between runs. On a hobby bench, the compact unit helps keep compatible 1:87 models together and ready for the next session, whether the fleet includes a single favourite vehicle or several regularly used models.
LiPo batteries
LiPo LiIon Safety-Bag, battery storage pouch
500906308€9.99
LiPo and LiIon battery packs are a fixed part of many RC and model-building setups, and this LiPo/LiION Safety-Bag gives them a dedicated place in the workshop. The compact rectangular format, silver outer surface and flap closure create a clear storage solution for battery handling between charging sessions, transport and shelf storage. The pouch is designed around a simple, practical task: keeping battery packs together in one enclosed bag instead of loose among tools and model parts. Black edging reinforces the shape visually and gives the bag a defined outline that is easy to spot in workshop gear. Its flexible construction suits everyday hobby use, whether battery packs are being moved to the track, stored in a pit box or set aside on a workbench after a run. The closed flap keeps the contents covered, and the compact proportions make the bag easy to place alongside chargers, cables and other RC equipment. In model sport routines, a dedicated battery bag helps keep preparation more organised before driving sessions and tidier once the run is over. The plain silver finish and clearly printed LiPo Safety Bag marking give the pouch a functional workshop character that fits naturally into RC and model-building environments. Warning! Not suitable for children under 14 years.
RC remote controls
RA 3Ch Reflex Wheel Pro 4, RC radio set, 2.4 GHz
500500111€59.99
The RA 3Ch Reflex Wheel Pro 4 brings 2.4 GHz control, a 4-channel mini receiver and a 5 kg CS5 servo into one radio set built for RC model driving with direct, adjustable command at the wheel. With a pistol-grip transmitter, side steering wheel and trigger throttle, the layout follows the handling style widely used in ground vehicles and keeps key functions close at hand. Channels 1 and 2 work fully proportionally, so steering and throttle inputs can be fed in smoothly rather than only in fixed steps. Servo reverse for both channels changes the direction of travel response when a model needs the opposite movement, and separate trim for throttle and steering helps straighten running behaviour without mechanical changes. Dual rate on both channels limits servo travel and can reduce speed response, which is useful when matching control sensitivity to different chassis layouts. Channel 3 is programmable as a switch or button function, adding another control option for compatible RC installations. The receiver accepts a power supply up to 6 V without a BEC and uses a Uni connector system for Futaba and Graupner-J/R compatibility. A waterproof nano receiver format suits compact installations, while the LED battery status display gives a clear visual check on transmitter power. The set includes the transmitter, 4-channel mini receiver, 5 kg CS5 servo and instructions. 4 AA batteries are required separately. Warning! Not suitable for children under 14 years.
RC remote controls
RC-Reflex Start Electric Set, RC set, 1:10
500500099€69.99
Built for 1:10 TAMIYA RC kits, the RC-Reflex Start Electric Set brings the key electronics for vehicle operation into one coordinated package. The set combines a compact 3-channel 2.4 GHz transmitter with matching receiver, a CS-3 steering servo, a 7.2 V 2500 mAh NiMH driving battery, a USB charger and 4 x AAA transmitter batteries, creating a clear starting point for hobby builds that still leaves room for precise setup work. The pistol-grip transmitter uses a wheel-style steering control and trigger throttle layout that suits RC car handling, while 2 fully proportional channels respond gradually rather than in fixed steps. Trim functions for accelerator and steering help correct running behaviour, and the servo reverse function allows the steering direction to be switched when the installation calls for it. A fail safe system adds a concrete control safeguard, and an LED battery status display keeps the charge state visible during operation. The included 3-channel receiver provides the matching vehicle-side link for the 2.4 GHz system. For workshop bench setup, club track preparation or the first runs after a fresh kit build, the set covers the central radio and power components in one box. The 14 Years marking fits the hobby-oriented character of the set, especially where model builders want a straightforward electronics package for getting a 1:10 chassis ready for driving. Warning! Not suitable for children under 14 years.
Li-ion batteries
XS-Line Li-Ion Battery, RC battery, 7.4 V
500608271€24.99
Built for compact RC power setups, this XS-Line Li-Ion battery combines 7.4 V output with 1500 mAh capacity in a shrink-wrapped pack sized for compatible 1:10 Carson XS chassis. The T-Plug connection gives the pack a direct link to the vehicle's electronics, while the XHP balancer adds the charging interface needed for Li-Ion battery maintenance. The pack label states 11.1 Wh, adding another clear reference point when matching voltage and capacity to an existing setup. As a rechargeable power source, it suits both replacement use and a second-pack role for longer workshop or track sessions with a compatible model. The Li-Ion format keeps the specification focused and easy to match against vehicle requirements in the XS-Line range. Basic text names compatibility with the 1:10 XS-Chassis and references Stadium Fighter and Offroad Fighter Cage variants within that line. A charger is required separately. In practical use, this battery fits the routine of charging, installing and swapping packs between runs on a compatible RC vehicle. The combination of 7.4 V, 1500 mAh, T-Plug and XHP balancer gives hobby users the key connection and power details at a glance when selecting the right pack for the bench or the field. Warning! Not suitable for children under 14 years.
Li-ion batteries
7.4 V Race Battery, RC battery, 3000 mAh
500608157€38.99
A 7.4 V Li-Ion race battery brings dependable rechargeable power to 1:10 RTR model driving, with 3000 mAh on board for sustained running and a compact pack shape that suits hobby vehicle layouts. The hardcase format and attached leads give the battery a clean, workshop-ready setup for regular use in electric RC applications. The pack uses a Tamiya plug as the main connection, making it a practical match for compatible RTR systems that rely on this connector standard. Its Li-Ion cell chemistry combines the stated 7.4 V output with a 3000 mAh capacity in a rechargeable drive pack aimed at model sport use. The rectangular case keeps the battery block contained in a defined footprint, while the cable layout supports clear routing inside a chassis. As a replacement pack or an additional battery for driving sessions, it adds a straightforward power option for compatible 1:10 electric models. In the workshop, the battery suits routine prep before a run, whether a chassis is being readied for casual driving or kept charged as a spare between sessions. On the track or in open driving areas, the combination of Li-Ion chemistry, 7.4 V output and 3000 mAh capacity supports consistent RC use with a connector format already common in RTR setups.
RC servos
CS-5 Servo 5kg/JR, servo, 50 Ncm control
500502015€11.99
The CS-5 Servo 5kg/JR brings controlled movement to RC installations with 50 Ncm torque, 0.17 sec/60° transit speed and a regular-size format that fits a wide range of model sport layouts. In a steering system, throttle linkage or another actuated function, the servo converts receiver commands into precise shaft movement through its Graupner/JR connector setup and 4.8-6 V operating range. Its housing measures 38.5 x 19 x 32 mm and weighs 39 g, which helps when planning installations in tighter chassis sections or compact equipment bays. The side mounting tabs allow the servo to be fixed into the model structure, while the output shaft accepts servo horns for linkage connection and throw setup. This makes the unit suitable wherever a model needs repeatable control input rather than free-running drive power. The electrical specification also makes it a practical match for common RC receiver-powered systems that work within the stated voltage window. In use, the CS-5 can take on steering duties in an RC car, move a control surface in another model format, or operate a mechanical linkage where measured travel and response time matter. The combination of regular-size dimensions, JR connection standard and clearly stated performance data gives hobby builds a solid basis for selecting the right control component. Warning! Not suitable for children under 14 years.
RC remote controls
RA 4Ch Reflex Wheel Pro 4, RC transmitter
500500119€59.99
The RA 4Ch Reflex Wheel Pro 4 2.4GHz LCD brings a compact pistol-grip layout, 4-channel control and a clear display into one radio system for RC driving with precise steering and throttle input. Its angled 4° steering wheel position, ball-bearing control unit and carbon structure shape a focused handling feel at the transmitter itself while the blue-lit LCD keeps setup values readable at a glance. Two channels work fully proportionally for finely graded control, while channel 3 can be programmed as a switch or button function and channel 4 uses a 3-level switch. The transmitter operates at 3.6-4.5 V, and the receiver accepts 3.5-10 V without a BEC, which broadens the range of compatible model installations. A failsafe function adds a concrete control safeguard if signal is lost. The system also stores settings for up to 15 models, which helps keep separate configurations ready for different vehicles instead of resetting trim and response values each time. Included are the 4-channel 2.4 GHz transmitter, a 4-channel mini receiver and instructions. 4.8-6 V operation and the compact receiver format suit hobby setups where steering, throttle and auxiliary functions need one coordinated radio system for track driving, car park sessions or workshop tuning between runs. Warning! Not suitable for children under 14 years.
RC receivers and accessories
Receiver Reflex Wheel PRO 3, RC receiver, 2.4 GHz
500501533€22.99
The Receiver Reflex Wheel PRO 3 2.4 GHz is built as a dedicated replacement receiver for the Carson Reflex Wheel PRO 3 RC system, bringing a compact 4-channel layout into compatible model vehicle electronics. Its dark housing measures 35 x 25 x 10 mm, making it easier to place the unit in confined radio boxes or chassis compartments where space is limited. The connector side is arranged with clearly printed CH1, CH2, CH3 and CH4 markings, so steering, throttle and extra control functions can be assigned in a straightforward layout. A 2.4 GHz operating frequency supports modern radio control use, while the 6 to 11 V input voltage range matches common RC system requirements for this class of receiver. The F/S Set function adds a defined failsafe setting, allowing a stored control position when signal is interrupted. As a replacement component, it suits repairs, maintenance work and the return of an existing Reflex Wheel PRO 3 setup to running condition. In workshop use, the compact format helps when replacing a receiver in a crowded chassis with limited installation room. On the bench or at the track, the 4-channel configuration supports model vehicles that need dependable control routing for core driving functions and added features.
NiMH batteries
4.8V 400mAh RC-Bau Mini-TAM, battery pack
500608175€14.99
This 4.8 V 400 mAh NiMH battery pack brings a compact rechargeable power source to RC-Bau Mini-TAM setups, with a rectangular 4-cell layout, red and black lead wires, and a white plug ready for the matching connection. Its format suits smaller RC construction and hobby vehicle compartments where a neatly sized pack matters as much as the electrical rating. The NiMH chemistry makes it a rechargeable option for repeated running sessions, while the 4.8 V output and 400 mAh capacity define the pack's role clearly within compatible RC systems. The shrink-wrapped cell block keeps the cells grouped in one unit, and the pre-fitted cable lead avoids the need to source a separate wired pack for the same voltage class. As an accessory in the electric and battery car set range, it fits naturally into model-building benches where replacement or spare power packs are part of regular use. In practice, this battery pack suits hobby sessions that rotate between charging, fitting, and driving, especially when a compact RC construction model needs a matching rechargeable pack kept ready between runs. A charger is required separately, and compatibility with the vehicle connection and battery compartment should be checked against the intended model.
NiMH batteries
7.2V 4000mAh Race Battery, RC battery, NiMH
500608225€35.99
Built around a 7.2 V NiMH cell pack and a 4000 mAh capacity, this race battery brings a solid power source to RC vehicles and other model building applications. The Tamiya connector system gives the pack a clear fit for compatible setups, while the compact multi-cell format with attached leads keeps the connection layout straightforward inside hobby chassis. The nickel-metal hydride design suits users who prefer a rechargeable pack for regular workshop and track use. A maximum charging current of 4 A supports quick charging within the stated specification, and the pack is also designed for high current discharge when the application demands stronger output under load. That combination makes it suitable not only for RC cars, but also for other model building uses that rely on a 7.2 V battery format and matching connector type. The wired plug connection and wrapped pack construction keep the electrical layout focused on practical installation in compatible models. In use, the battery fits naturally into driving sessions, maintenance routines and general bench preparation for hobby models. It also works well as a replacement or spare pack for compatible RC setups where 7.2 V output, 4000 mAh capacity and a Tamiya connector are the required battery specifications.
NiMH batteries
RC Sport Race Battery, 4.8V 400mAh, NiMH pack
500608240€14.99
Compact rechargeable power is often the missing link in a well-matched RC setup, and this RC Sport Race Battery brings that role into a small 4.8 V NiMH pack with 400 mAh capacity. The green shrink-wrapped format, attached red and black leads, and JST connector create a clear, practical layout for compatible model electronics. The nickel-metal hydride cell pack is built for RC and model sport use where a rechargeable battery is needed in a compact format. Its 4.8 V output suits electronics designed for that voltage, while the 400 mAh rating supports smaller onboard applications without adding unnecessary bulk. The fixed cable lead is already attached to the pack, so the connection path stays direct between battery and matching system. The JST plug gives the pack a defined connector standard for compatible equipment, which matters when fitting batteries into tighter chassis or electronics spaces. This battery pack fits naturally into hobby benches stocked for maintenance, charging, and regular vehicle preparation. It can serve as a practical replacement pack or as an extra rechargeable unit for compatible RC models and electronics that use a JST connection and a 4.8 V NiMH format. Minimum age: 14 years
RC remote controls
Reflex Wheel Pro 4, RC transmitter, 2.4 GHz
500500113€69.99
The Reflex Wheel Pro 4 brings 2.4 GHz control, LCD setup access and a wheel-style layout into one radio system built for RC model use. With 4 channels, 2 included mini receivers and a transmitter operating voltage of 3.6-4.5 V, it covers steering, throttle and added switching functions in a compact setup for multiple vehicles. Channels 1 and 2 work as fully proportional controls, giving fine input over steering and throttle instead of fixed steps. Channel 3 can be programmed as a switch or button function for a servo, while channel 4 uses a 3-level switch for added onboard functions. Servo reverse for channels 1 and 2 changes direction of travel when a model layout requires it, and the receiver power supply range of 3.5-10 V supports installation in different RC configurations without a BEC. The ball-bearing control unit supports precise steering input, while trim, dual rate, expo and ABS functions allow response to be adjusted to the model and surface. The LCD screen and LED battery status display keep key settings and charge information visible during setup and running. A failsafe function adds a concrete control feature for signal loss situations, and 15-model memory stores settings for different vehicles. The Uni connector system for Futaba and Graupner-J/R broadens compatibility across existing RC equipment. 4 AA batteries are required separately. Warning! Not suitable for children under 14 years.
RC receivers and accessories
Reflex Wheel PRO3 Receiver, RC receiver, 2.4GHz
500501534€24.99
The Reflex Wheel PRO3 receiver brings 2.4 GHz control, 4 channels and a water-resistant design into a compact RC component built for model installations where space and dependable signal handling both matter. As a replacement receiver for the Carson Reflex Wheel PRO3 radio system, it keeps the layout focused with clearly marked CH1, CH2, CH3 and CH4 connections plus a dedicated F/S Set control on the case. Its 35 x 25 x 10 mm dimensions make it easy to position inside many RC chassis, while the 6 to 11 V input range suits common onboard electronics. The labelled connector side helps keep steering servo, throttle control and further channel functions clearly assigned during installation. A visible antenna lead extends from the housing for radio reception, and the marked switch area adds direct access on the unit itself. The receiver is intended for the Reflex Wheel PRO3 system, making it a straightforward replacement when an existing setup needs a matching 4-channel unit. In use, the compact format suits touring cars, buggies, crawlers and other radio-controlled models where electronics space is limited. The water-resistant build and failsafe setting support controlled running in changing track and outdoor conditions, from workshop rebuilds to regular driving sessions.
NiMH batteries
1:16 Tractor JST, NiMH battery pack, 4.8V
500608248€15.99
This 1:16 Tractor JST battery pack is built as a direct power unit for compatible RC tractor models using a 4.8 V NiMH setup. The 400 mAh format and JST connector keep the specification aligned with the stated application, making it a straightforward match where the model calls for this exact battery type. As a rechargeable NiMH pack, it fits hobby routines that rely on swap-ready battery sets for repeated driving sessions. The stated maximum charging current is 400 mA, and the pack is supplied as a dedicated battery rather than a universal adapter or mixed accessory set. That makes the key details clear at a glance: 4.8 V voltage, 400 mAh capacity, NiMH chemistry and JST connection. The battery is not included with the vehicle, so it serves as a separate replacement or additional power pack for compatible models. In regular RC use, a matching spare battery helps keep a 1:16 tractor ready for the next run after charging. It also suits workshop shelves where connector type and battery format need to stay consistent across an existing compatible setup.
NiMH batteries
4.8V 500mAh NiMH Battery, replacement battery
500608247€14.99
This 4.8 V 500 mAh NiMH battery pack is built as a replacement power source for compatible Carson RC vehicles and connects through a JST plug. The compact pack format with attached red and black leads suits battery-compartment installation in models that use this exact voltage, capacity and connector layout. NiMH technology makes this battery a practical match for the specified vehicle electronics, while the 500 mAh rating supports the intended power supply setup of the compatible models. The pack is listed for the Carson FlixBus and the Carson 1:14 Fire brigade, so hobby users can keep an existing model in service with the stated battery type instead of searching through unsuitable formats. The included contents are focused and clear: 1 NiMH battery pack. In use, the battery connects inside the vehicle through the JST lead and sits in the battery bay shown for underside access on compatible models. It suits battery replacement when the original pack has reached the end of its service life or when a matching spare is needed for continued RC operation.
NiMH batteries
6V 3000mAh NiMH RX-Battery TAM/BEC Pack
500608142€24.99
This 6V RX-Battery with 3000 mAh capacity is built for RC model setups that need a dedicated receiver power source. The NiMH pack format and TAM/BEC connection make it a focused choice for compatible electronics, with attached leads ready for installation in model sport applications. As a rechargeable battery pack, it supports repeated charge and discharge cycles in regular hobby use. The 6V output suits receiver duties where a separate onboard supply is required, while the 3000 mAh rating provides a substantial reserve for longer sessions. The black shrink-wrapped construction keeps the cell pack bundled in a compact form, and the integrated cable set combines the main connector with an additional small plug visible on the pack. Batteries are not included. In the workshop, the pack fits naturally into maintenance, rebuild and replacement routines for compatible RC vehicles. At the track or during club running sessions, it serves as a dedicated power component for onboard electronics where a 6V NiMH receiver pack with TAM/BEC connection is specified.
NiMH batteries
7.2V 700mAh NiMH Battery Pack, RC accessory
500608204€17.99
This 7.2 V 700 mAh NiMH battery pack brings a straightforward power solution to compatible RC vehicle setups, with a compact shrink-wrapped format and JST connection that suits hobby use. The rechargeable pack is built for electric and battery-powered car applications, making it a practical choice when a fresh battery is needed for the next driving session. The NiMH cell format offers a familiar power source for many RC models that use this battery type, while the 7.2 V rating and 700 mAh capacity define the pack's electrical specification clearly. Red and black leads run from the pack to the black JST plug, helping keep the connection layout easy to identify during fitting. The pack format shown in the product data is shaped for installation in an RC vehicle battery compartment, where the cable can be routed to the vehicle connector. Batteries are not included with the main vehicle where separately required, and this accessory is supplied as the battery pack itself. In day-to-day hobby use, the pack works well as a replacement battery for a compatible model or as an extra rechargeable unit kept ready between runs. For model-building enthusiasts running electric RC vehicles, that means less downtime at the bench and more time focused on setup, charging rotation, and driving.
RC servos
CS-5 Servo 5kg/JR, servo, regular size
500502016€14.99
The CS-5 Servo 5kg/JR brings regular-size servo control to RC model setups with 50 Ncm torque, a 4.8-6 V operating range and a Graupner/JR connector-system. Its compact 38.5 x 19 x 32 mm format and 39 g weight make it a practical choice for installations where the servo has to fit neatly alongside the rest of the radio equipment. The 0.17 sec/60° transit speed gives the output shaft a quick response when steering geometry or throttle linkage needs direct movement. The regular-size format suits many common model layouts, and the connector-system supports integration with electronics built around the Graupner/JR standard. The servo housing includes mounting tabs for fixed installation in the chassis or radio tray, while the splined output shaft accepts servo horns for linkage connection. Age 14 Years is stated for this model component. In use, the CS-5 fits projects where reliable actuation is needed for steering, throttle or other control functions in model builds. It also suits replacement work when an existing setup calls for a regular-size servo with Graupner/JR connection and clearly defined speed, voltage and torque figures. Warning! Not suitable for children under 14 years.
Accessories
Digital Plug Decoder, Scalextric Slot Car Adapter
500707130€42.99
This digital plug decoder converts compatible Scalextric Easyfit Digital Plug Ready slot cars for use on Carrera 132 digital tracks, bringing digital control functions into an existing chassis with a compact 18 x 28 x 8 mm board. The 3 g unit installs in place of the DPR cover assembly and uses the central Scalextric plug connection for a direct retrofit. The decoder includes an integrated IR diode for track communication and supports programming through the control unit, including coding to a speed controller, base speed adjustment and braking level setup. Entered settings remain stored until reprogrammed, which keeps the chosen setup available for later sessions. Optional lighting connections on the board support front light, tail light and brake light functions through polarity-marked plugs. The included 2 light cables with soldered sockets provide the connection path when the vehicle layout supports this configuration. The operating voltage range is 12.0 to 14.8 volts DC. Installation follows the DPR format: remove the underside cover, disconnect the existing analog board connection, connect the digital board to the vehicle socket and secure the cover again with the screw. The decoder is only suitable for Scalextric Easyfit Digital Plug Ready slot cars and is intended for ages 14 years and up. Warning! Not suitable for children under 14 years.
RC remote controls
FS 3K Reflex Wheel Pro 4 2,4GHz
500500110€45.99
The Carson RA 3Ch Reflex Wheel Pro 4 2.4GHz (500500110) is an ergonomic 3-channel remote control with 2.4 GHz system, nano receiver and instructions. For model building fans, it offers two infinitely variable proportional channels, programmable channel 3, servo reverse, trim and dual rate functions, LED battery indicator, failsafe, ball bearing steering wheel and operating voltage 3.6-4.5 V. Not for children under 14 years. Warning! Not suitable for children under 14 years.
RC receivers and accessories
Receiver Reflex Stick Pro LCD, RC receiver
500501544€54.99
The Receiver Reflex Stick Pro LCD is a compact 2.4 GHz replacement receiver for the Reflex Stick Multi Pro LCD RC system, built to restore full radio control in compatible model setups. With 14 channels in one unit, it provides broad connection capacity for steering, throttle and additional switched or proportional functions in more complex vehicle or model configurations. Its 35 x 26 x 14 mm format helps the receiver fit into installations where electronics space is limited, while the 4.8 to 6 V input range matches common RC system voltages. The housing shown with channel ports from CH1 to CH14, a bind area, an F/S set function and LED status indication points to clear handling during setup and system pairing. As a replacement component, it is intended for the Carson Reflex Stick Multi Pro LCD system rather than as a universal receiver claim across unrelated transmitters. In practical use, this receiver suits hobby workbench repairs, electronics replacement in an existing model, or the restoration of a compatible RC setup after a receiver swap. The 14-channel layout leaves room for models that go beyond basic steering and drive functions and need extra control paths for added onboard features.
RC receivers and accessories
Receiver Reflex Wheel Start, RC receiver, 2.4 GHz
500501543€19.99
The Receiver Reflex Wheel Start 2.4 GHz is a dedicated replacement receiver for the Carson Reflex Wheel Start RC system, bringing the radio link back into service with a compact 35 x 30 x 13 mm format and 3-channel control. Its 2.4 GHz transmission setup and slim antenna wire suit model installations where electronics need to sit cleanly inside a tight chassis layout. The receiver is designed for the matching Reflex Wheel Start system and works as the central connection point for steering, throttle and an additional channel. An input voltage range of 4.8-11 V supports integration into common RC vehicle electronics, while the exposed connector bank keeps servo and control leads clearly arranged during installation. The housing also carries an LED indicator area and a switch point for setup functions on the unit itself. This is an electronic accessory for model use rather than a toy, with the technical focus placed on dependable signal handling inside the vehicle. In the workshop, it serves as the right spare part when an existing Reflex Wheel Start setup needs a fresh receiver. Once installed in a compatible RC model, the compact body and straightforward channel layout help keep the onboard electronics organised for regular driving sessions and maintenance work.
Remote-controlled systems
Reflex Wheel Pro 4 Gyro Receiver, 4-channel
500501550€32.99
The Reflex Wheel Pro 4 Gyro receiver brings 4-channel radio control and integrated gyro support together in one compact module for RC model setups. Its black housing carries clearly printed CH1, CH2, CH3 and CH4 markings, making the connection layout easy to read during installation and helping keep each assigned function in order inside the vehicle. The unit is part of the Reflex Series Pro 4 range and includes dedicated Pair and FS markings directly above the connector area. That layout keeps binding and failsafe functions tied closely to the receiver body instead of leaving key setup steps to guesswork. Built-in DEC and INC controls add direct access to adjustment changes on the module itself, which is useful when fine-tuning the gyro response in a workshop setting. The compact rectangular form also suits tighter chassis layouts where electronics need to sit neatly alongside steering and drive components. In practical use, this receiver fits hobby builds that need organised channel assignment and onboard adjustment access in one place. The 14 Years marking identifies the recommended age, while the receiver format suits model-building enthusiasts working on compatible RC vehicles and electronics installations. Warning! Not suitable for children under 14 years.
RC remote controls
Reflex Wheel Start, radio control, 2.4 GHz
500500102€34.99
The Reflex Wheel Start brings classic wheel-style RC control into a compact 2.4 GHz system with a black pistol-grip transmitter and matching 3-channel mini-receiver. A large side steering wheel and trigger layout create the familiar handling used in many RC car setups, while the wireless link supports clean installation in compatible models. Two fully proportional channels allow gradual steering and throttle input instead of simple on or off commands. Servo reverse changes the travel direction when a steering or throttle servo moves the wrong way after installation, and the trim functions for both gas and steering help centre the model accurately. Dual rate on both channels makes it possible to limit servo travel, which is useful when a setup needs reduced steering throw or a calmer response. The transmitter operates on 4.8 to 6 V, and receiver powering without BEC is possible up to 11 V. The Uni connector system supports Futaba and Graupner-J/R layouts, adding flexibility for different hobby setups. An LED battery status display keeps the transmitter power level in view during driving sessions or bench setup. The integrated failsafe adds a concrete control feature for RC use, and the included transmitter with mini-receiver forms a practical entry point for 14 years and up. Warning! Not suitable for children under 14 years.
Electronics
1:14 LED-PCB 7-Section Taillight, model accessory
500907387€57.99
This 1:14 LED-PCB 7-Section taillight brings detailed rear lighting to compatible model vehicle builds with a compact 7.2 V circuit layout and a matched left and right board set. The mirrored PCB pair adds a technical finishing touch at the rear of a truck or trailer body, where light functions and scale detailing matter just as much as the bodywork itself. Each green board is marked L or R and fitted with preattached wires in blue, black, white, red, yellow or orange, depending on side assignment. The wiring diagrams show how the connections are allocated across several rear-light functions, including brake light, driving or running light, taillight, reversing light and blinker operation. Mounting holes on the boards support fixed placement inside the light area, while the compact PCB format suits model installations where space is limited and cable routing needs to stay orderly. Suitable for item no. 907037, the set is intended for left and right installation rather than a universal single-side fit. In a workshop setup, the labelled boards and colour-coded leads help keep orientation clear during installation or replacement. Once integrated into a compatible 1:14 vehicle, the rear section gains a more complete scale look with function-based light positions that match the technical character of model truck and trailer builds.
NiMH batteries
6V/1800mAh RX-Battery Hump BEC, battery pack
500608230€13.99
This 6 V NiMH RX-Battery Hump BEC is built for model electronics that need a compact rechargeable power source with a defined receiver-battery format. The 1800 mAh capacity gives the pack a solid energy reserve for compatible RC installations, while the hump-pack shape helps it fit layouts where a flat pack would take up too much room. The BEC connector system is intended mainly for use as a receiver battery, so the pack suits setups that call for a dedicated onboard power supply rather than a general loose cell arrangement. Nickel-metal hydride chemistry makes it a rechargeable option for repeated workshop, pit and running use, and the stated maximum charging current of 1.8 A sets a clear charging parameter for matching equipment. Beyond receiver duty, the compact pack can also serve as an additional battery for many other model building applications when a small 6 V source is required. On the bench, in an RC vehicle or in a custom model installation, the pack adds a straightforward way to supply compatible electronics with rechargeable 6 V power. Age marking: 14 years+
NiMH batteries
7.2V 1800mAh NiMH Race Battery TAM, battery
500608221€18.99
Built for hobby-grade RC use, the 7.2 V 1800 mAh NiMH Race Battery TAM delivers rechargeable power in a compact racing pack format for compatible vehicles and other model building applications. The nickel-metal hydride cell chemistry gives this pack a clear role in electric setups that need a ready-to-run power source with a stated maximum charging current of 1.8 A. Its Tamiya connector system provides the matching plug format for compatible chassis and vehicle layouts, while the pack design suits common RC installations where a wired battery connection is required. Beyond RC cars, the stated use for other model building applications opens the door to further electric hobby setups that run on the same voltage and connector standard. The battery is rechargeable rather than disposable, making it a practical workshop component for repeated driving and testing sessions. Age marking: 14 Years. On the bench, the pack fits naturally into the routine of charging, connecting and heading out for a run with a compatible electric model. In active RC use, the combination of 7.2 V output, 1800 mAh capacity and high-current discharge supports driving sessions that call for dependable power delivery.
Li-ion batteries
7.4V 2200mAh Race Battery, RC battery, 1:10
500608152€36.99
This 7.4 V Li-Ion race battery brings dependable drive power to compatible 1:10 RTR models, with 2200 mAh capacity matched to regular RC running. The hardcase pack, main power lead and compact cable layout create a clean, workshop-ready setup for hobby sessions at the bench and on the track. The battery is equipped with a Tamiya plug for direct use with compatible vehicles that use this connector standard. Alongside the main lead, a separate balance connector is fitted for charging routines designed for Li-Ion packs. The rectangular pack shape suits the battery bays commonly used in 1:10 RTR chassis, where a contained format helps with placement and cable management. As an accessory for powered RC vehicles, it serves as the drive pack rather than a transmitter or receiver power source. In use, the pack suits spare-battery rotation for race days, practice laps and general weekend running with 1:10 RTR cars. The included battery pack gives compatible models a ready power source; a suitable charger is required separately.
LiPo batteries
7.4V 5400mAh LiPo Battery, RC battery, 60C
500608234€54.99
Built for RC car setups that need strong current delivery, this 7.4 V LiPo battery combines a 5400 mAh capacity with a 60C rating in a compact drive pack for compatible model vehicles. The hardcase format shown in the product visuals adds a defined rectangular shape that fits neatly into typical battery trays, while the T-plug connection supports a direct high-current link in matching layouts. With 39.96 Wh marked on the pack, the battery brings a clearly stated energy figure to workshop planning and running preparation. The attached leads include the main power connection and a separate balance connector, giving the pack the connection layout commonly used for charging and cell balancing. The battery is described as suitable for 1:10 and 1:8 brushed and brushless RC cars, which makes it a practical choice for spare-power duties, replacement use, or a second pack for longer track or off-road sessions. The stated maximum charging current is 5.4 A. In the chassis, the pack suits builds where cable routing, tray fit and connector type matter just as much as raw output. On the bench or at the track, it supports compatible RC cars that rely on a 7.4 V drive battery for repeated runs and quick pack changes between sessions.
RC receivers and accessories
Battery Box, RC accessory, receiver battery mount
500503033€3.79
Glow-engine RC cars often rely on a separate receiver power supply, and this Battery box is made for exactly that task. As a receiver battery mount with attached connection cable, it creates a direct link between the battery compartment and the onboard electronics in compatible RC setups. The housing shown in the product data is built for 2 cylindrical AA cells and uses internal spring contacts at each end of the compartment. Molded + and - markings inside the tray guide battery orientation, while the red and black leads run out to a compact 2-pin connector for straightforward integration into the vehicle's receiver power circuit. That makes this accessory useful both as a replacement part for an existing model and as a practical spare kept in the workshop for maintenance or rebuilds. Batteries are not included. In use, the battery box fits the kind of setup where a glow-engine model separates receiver power from the engine system, helping keep the radio functions supplied during running sessions. It also works well as a service part when worn battery holders, tired contacts or damaged leads need to be swapped out in a compatible RC car. Warning! Not suitable for children under 14 years.
RC servos
CS-6 Servo, RC servo, 6 kg metal gear
500502036€18.99
The CS-6 Servo brings controlled movement to RC steering and throttle functions with a regular-size format, 6 kg force and a 0.2-second response. Its blue and black housing, top output spline and JR plug layout make it a focused choice for model sport builds that need a compact actuator with clear, direct linkage control. Inside the housing, metal gears transfer the servo movement to the output shaft, supporting precise actuation where repeated steering corrections or throttle inputs matter. The 3-wire connector lead links the unit to compatible receiver systems, while the side mounting tabs with screw holes allow fixed installation in a chassis or frame. The supplied horn set includes a single-arm horn and a 4-arm cross horn, each with multiple mounting holes for different linkage positions and throw adjustment. Rubber grommets and the mounting screw complete the core fitting hardware shown for installation. In an RC car, boat or other model using linkage-driven motion, the CS-6 can be assigned to steering, throttle or another control task that needs measured rotational travel. Age marking: 14 Years.
RC remote controls
RC-Reflex Pro 3, electric set, 2.4 GHz RC
500500091€124.99
The RC-Reflex Pro 3 Electric Set brings together the core electronics needed to equip ARR and assembly kit models for the track or the water. Built around a 2.4 GHz radio system, the set suits RC cars and boats and combines control hardware, charging equipment and NiMH power components in one coordinated package. The transmitter works with an operating voltage of 4.8 to 6 V and pairs with a 4-channel receiver. Two continuously controllable fully proportional channels handle steering and throttle inputs with direct response. Servo reverse is available on both channels, while trimming functions for accelerator and steering help align the model accurately. Dual rate on both channels limits servo travel when a calmer steering setup is needed. The integrated fail-safe adds a concrete control function for signal loss situations, and the plug system supports Futaba and Graupner-J/R connections. A charging socket with plus terminal inside is built into the system. Power supply is covered by a 7.2 V 3000 mAh NiMH driving battery with TAMIYA plug and 4 NiMH Mignon 1.2 V 2100 mAh transmitter batteries. The included 2-in-1 charger works from 100-240 V, 50-60 Hz AC and provides max. 2 A at 9 V on output 1 and max. 0.5 A at 6 V on output 2. With the CS-6 steering servo, receiver, charger and battery set included, this electric package fits hobby setups that need a complete radio and power foundation for Tamiya-compatible models. Age 14 Years Warning! Not suitable for children under 14 years.
RC receivers and accessories
Reflex 6/14Ch Switch 4, switch module, 4-channel
500503061€44.99
The Reflex 6/14Ch Switch 4 adds 4 extra switching functions to an RC setup through one receiver channel, turning button, switch or joystick inputs into separate output commands. Its compact 16 x 14 x 4 mm housing and approx. 10 g weight suit installations where space is limited and clean wiring matters. The module connects directly to the RC receiver and evaluates both control position and input duration, so short and long movements in the up and down directions can trigger different outputs. That switching logic gives access to 4 separate NPN outputs, each rated for up to 2.5 A and a maximum switching voltage of 16 V/DC. Every output uses a 200 mm blue silicone cable with 0.25 mm² cross-section and is connected to the negative pole of the load. The black negative cable also measures 200 mm, uses 0.5 mm² cable cross-section, and can be connected directly to the battery or a distribution terminal. Input voltage is 4 to 8 V/DC, with 5.0 to 5.5 V/DC supplied from the receiver, and input current is approx. 18 mA at 5.0 V/DC. A 300 mm servo connection with UNI system supplies the module itself from the receiver, keeping the layout straightforward in model cars, trucks or other RC builds with added electrical functions. For high loads, the black cable is connected to the distribution terminal or drive battery to prevent damage to the receiver. Age marking: 14+ Warning! Not suitable for children under 14 years.
Remote-controlled systems
Reflex Wheel Pro 4, RC radio set, 2.4 GHz
500500121€134.99
The Reflex Wheel Pro 4 set brings core RC electronics together in one 2.4 GHz package built around a 4-channel pistol-grip transmitter, matching mini receiver, 6 kg metal-gear servo and brushless set. The transmitter uses 2 infinitely variable fully proportional channels and 2 additional switchable channels, opening the door to steering, throttle and extra vehicle functions from a single handset. Its LCD interface supports direct setup work for hobby-grade driving, with servo reverse on channels 1 and 2, trim for throttle and steering, dual rate adjustment, Expo and ABS functions, and 15-model memory for running more than one vehicle without rebuilding settings each time. Channel 3 can be programmed as a switch or button function, while channel 4 uses a 3-level switch. An LED battery status display keeps the transmitter power level visible during use. The transmitter operates at 3.6-4.5 V, and the receiver power supply is rated at 3.5-10 V without a BEC. On the vehicle side, the waterproof nano receiver and compact electronics suit tight chassis layouts, while the brushless set adds the drive hardware needed for responsive running. The included instructions complete the set. With 14 Years as the stated age marking, this package fits hobby sessions focused on tuning steering feel, throttle response and auxiliary functions for track, touring or general RC driving. Warning! Not suitable for children under 14 years.
NiMH batteries
RX Battery Hump BEC, receiver battery pack, 6V
500608104€18.49
A dedicated receiver battery can make all the difference in an RC setup, and this RX Battery Hump BEC brings that role into a compact 6V format with 1600mAh NiMH capacity. The hump configuration suits installations that need a stepped pack shape, while the BEC plug provides the connection for compatible receiver systems in model sport applications. The NiMH cell chemistry makes this pack a rechargeable power source for repeated use, and the 6V rating matches the clear electrical specification given for receiver supply. Red and black leads run from the shrink-wrapped pack to the connector, creating a straightforward layout for integration into suitable RC vehicles and related hobby builds. As a separate battery pack rather than a complete driving set, it is aimed at installations where the receiver power source is chosen as an individual component within the electronics setup. In workshop preparation, race-day spares storage or routine maintenance between runs, the compact pack format fits naturally into the rhythm of RC model use. Minimum age 14 years is stated for this battery pack. Warning! Not suitable for children under 14 years.
RC servos
Servo CS-6, RC servo, low profile waterproof
500502047€26.99
The Servo CS-6 brings compact low-profile dimensions, waterproof construction and 6 kg control force into one RC servo for space-conscious model layouts. Its metal gear transmission and JR connector suit steering and linkage duties where a clean fit and dependable response matter across changing track conditions. The low-profile housing helps when radio trays, chassis decks or body clearances leave little vertical room, while the stated 4.8-6 Volt operating range supports use across common RC electrical setups. A speed figure of 0.16 adds a concrete reference for the servo's response in steering or control applications. Included components cover the servo itself, a JR connector and a servo horn set, so the mounting and linkage side starts with the core parts already in hand. The horn set adds different connection points for setting linkage position and travel, and the metal output train keeps the transfer from servo shaft to steering system mechanically focused. In touring cars, drift builds, boats or other compact RC models, the CS-6 fits where standard-height servos can become awkward to place. Wet grass, puddles, damp pit areas or splash-prone running sessions make practical use of the waterproof design, while the 14 years marking places it within the hobby-focused end of the range. Warning! Not suitable for children under 14 years.
LiPo batteries
Single Blade 320 battery, RC accessory, 3.7V
500608265€16.99
The Single Blade 320 uses a compact 3.7 V LiPo battery pack with 300 mAh capacity and 1.11 Wh energy, giving this RC accessory a clearly defined power format for the matching model. Its black housing combines a slim rectangular shape with a vented upper shell and a metallic end cap, creating a neat module that fits the technical look of small-scale RC equipment. Visible contact pins at one end show the docking-style connection concept directly, so the battery is built for straightforward insertion into the compatible device rather than loose wire handling. The lithium polymer cell format keeps the pack compact, which suits applications where space inside the model is limited. As a separate battery unit, it works well as a replacement for a worn pack or as an additional charged module kept ready for the next run. The casing also carries the printed electrical data on the pack itself, so voltage, capacity and energy rating remain easy to identify during workshop prep. On the bench, this battery suits the routine of charging, swapping and returning a model to action with minimal interruption. In regular RC use, a second matched pack can help keep sessions moving while one battery charges and the other is in service. Warning! Not suitable for children under 14 years.
Electronics
1:14 License Plate Illumination, PCB Module
500907381€18.99
Scale vehicle lighting often comes down to the small details, and this 1:14 PCB license plate illumination module adds that finishing touch with a dedicated board for number plate lighting. Designed for 7.2 V to 14 V systems, the compact circuit board brings a focused electrical solution to model builds that call for a realistic rear lighting accent. The board uses a simple, purposeful layout with visible copper traces, 2 illuminated light points and a mounted resistor marked 222. Red and black wires are already attached to the central solder pads, giving a clear polarity-based connection path for installation into an existing model electrical setup. This makes the module suitable for hobby work such as upgrading a scale truck, replacing a worn lighting unit, or adding a separate number plate light circuit to a custom body section. In use, the small-format PCB suits projects where space is limited and clean integration matters. On a workshop bench, it supports careful wiring and placement; once fitted to a 1:14 vehicle, it helps complete the look of the rear section with a precise illuminated detail that matches the character of scale model building.
RC truck accessories
1:14 Low Loader Axle Steered, trailer axle
500907699€104.99
Low loaders with steered axle groups are a familiar sight in heavy-haul transport, where long trailers need controlled wheel movement to stay manageable in tight turns. This 1:14 Low Loader Axle Steered assembly brings that engineering theme into a scale trailer build with a compact mechanical unit focused on the undercarriage. The set centres on a linkage-driven axle layout with metal arms, mounting brackets, threaded ends, fasteners and cross-members arranged to transmit steering movement across the assembly. Product images show a black main bar combined with silver linkage elements, pivot points and adjustable slotted sections that support careful setup during installation. The construction is aimed at model-building enthusiasts who enjoy technical chassis work and visible mechanical function beneath the trailer deck. Instead of decorative bodywork, the focus here is on the geometry of the running gear and the interaction between rods, joints and mounts. In a 1:14 transport scene, the assembly suits low loader projects with a detailed underside, upright loading ramps and multi-axle trailer layouts. Age marking: 14 Years. Batteries are not included. Warning! Not suitable for children under 14 years.
Electronics
1:14 LR LED Front/Rear Light PCB, model accessory
500907144€27.99
Lighting details can change the whole presence of a scale truck, and this 1:14 LR LED Front/Rear Light PCB set brings that effect into a compact electronics accessory for compatible model builds. The set is designed for 1:14 LR applications and uses LED technology with 2 printed circuit boards to create front or rear lighting points that suit detailed finishing work. The accessory format focuses on the electrical side of model customisation. Prewired LED units are included, so the lamp elements already carry attached leads for integration into the vehicle layout. The stated 7.2 V specification defines the intended operating voltage, and the included resistors form part of the circuit setup for that voltage. This makes the set suitable for hobbyists who want to add functional light elements while keeping the installation based on clearly defined components. The compact lamp housings and separate mounting parts shown for the set support precise placement on the model. On a workshop bench, during a body upgrade, or as part of a scale truck rebuild, the lighting set adds a more technical finish to the vehicle. Age marking: 14 years and over. This accessory suits projects where visible electronics details and model-specific light positions are part of the overall build concept.
Basic accessories
1:14 Pole for Trailer Hitch, spare part
500907377€12.49
This 1:14 pole is made as the matching spare part for trailer hitch 500907182 and adds a precise replacement option for model setups that need the original connection element restored. The dark grey moulded piece has an elongated, slightly tapered form that gives the assembly a defined mechanical profile while keeping the part easy to identify during maintenance. At one end, the pole features a rounded eyelet hole, while the opposite end is formed with a rectangular blunt finish. Two recessed circular holes sit along the upper surface and create clear fastening points for mounting within the corresponding hitch arrangement. These visible structural details support accurate positioning when an existing part is replaced and help keep the matching assembly consistent with its intended layout. In workshop use, the pole suits repair benches, ongoing maintenance tasks and parts stock for 1:14 model vehicles with the compatible trailer hitch system. Age marking: 14+.
RC truck accessories
1:14 Servo Mount Set, steering axle spare part
500907698€31.49
In 1:14 scale transport and heavy-haul models, the steering geometry under the trailer is part of what gives the finished build its convincing technical character. This servo mount set for the steering axle adds the dedicated hardware needed to integrate that mechanism with a clean, model-focused layout. The set centres on a black mounting plate with a large rectangular cut-out and four mounting holes, supported by a long threaded rod, 2 rod-end style eyelet fittings, screws, bolts and hex nuts. Together, these parts create the basis for a mechanical linkage between the servo position and the axle steering assembly. The threaded rod allows the linkage length to be set within the installed arrangement, while the eyelet ends provide defined connection points for the moving parts. The hardware layout suits detailed chassis work where the underbody and axle area remain visible as part of the model's overall realism. Used on a steering axle build or repair, the set supports controlled integration of the steering mechanism into the undercarriage. It fits naturally into workshop sessions focused on trailer chassis detail, linkage setup and functional model engineering for 14 Years+ hobby use. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Trailer palette case, trailer accessory
500907153€71.99
Built around the look of a parked box trailer, this 1:14 trailer palette case brings freight-yard character into a model transport scene while adding 6 pallets for loading layouts and depot setups. The white trailer body, black side retention straps, grey latch details and tandem rear wheels create a recognisable logistics silhouette that sits naturally beside matching truck models. The front section stands on lowered landing legs with round footplates, and an underbody storage box adds another familiar trailer detail beneath the side panel. A separate loading area with side walls and a hinged access section creates space for pallet handling, so the accessory does more than fill the background. The 6 pallets can be arranged in the storage bay, placed on the platform or set out around a warehouse scene to build up loading and unloading situations with a clear transport theme. In a depot layout, workshop display or road-haulage diorama, the trailer palette case works as a focal point for freight movement rather than a static backdrop. The 1:14 scale keeps the proportions aligned with matching model truck environments, and the 14 Years age marking is stated in the product data.
Basic accessories
1:14 Trailer Splash Guard, trailer accessory
500907646€31.99
Rear splash guards are a familiar detail on working trailers, and this 1:14 set brings that look to compatible scale builds with a defined add-on for the rear end. Designed for the Carson Fliegl Megarunner 500907235 and the 3-axle stanchion trailer 500907629, the splash guard mounts at the bumper or rear underrun protection and adds a more complete commercial-vehicle finish. The set includes 1 large splash guard and assembly material for the rear installation. On the named trailers, the required boreholes are already present in the rear bumper, which keeps the fitting process aligned with the existing mounting points. The screw-on construction attaches the parts directly to the trailer bumper or rear underrun protection. Beyond the two specified trailer models, the same parts can also be used for self-construction when a custom 1:14 trailer build calls for a rear flap assembly. In a workshop setting, the splash guard suits upgrades, repairs, or detail-focused finishing on a trailer chassis. Mounted behind the rear section, it strengthens the scale appearance of transport scenes, yard layouts, and road-going truck combinations where the back end deserves the same attention as the sides and load area.
Basic accessories
1:14 Trailersuspension-Set, trailer axle kit
500907643€82.99
Built for scale truck and trailer projects, this 1:14 Trailersuspension-Set adds a more technical undercarriage layout with dummy air springs, a lift option and axle movement shaped for model driving. The kit includes 2 suspension versions, so the trailer can be configured in standard height or with a raised +8 mm setup to align with a higher tractor saddle level. The axle assembly measures 78 x 165 x 50 mm and uses a 5 mm wheel axle. New, softer rubber bellows improve bump cushioning at the suspension points, while the geometry delivers 6 mm spring travel in the standard setup and 14 mm in the off-road setup. Twist values of approx. 6 mm in standard form and approx. 10 mm in off-road form add further articulation across uneven sections. The maximum load per axle is approx. 5,000 g. Included: kit and instructions. On a scale road tractor and trailer combination, the raised suspension option helps create a cleaner visual match at the coupling height, while the standard setup suits a lower running stance. During driving, the added axle movement gives the trailer a more convincing response over bumps, ramps and rougher model terrain.
Basic accessories
1:14 Volvo Underr.guard, model accessory
500907515€51.99
Rear underride guards are a defining detail on European trucks, framing the lower rear section with the functional look seen on full-size road vehicles. This 1:14 Volvo underride guard with taillight mount brings that character into a scale build with a metal hardware set shaped for model-truck assembly. The assembly uses mirrored bracket plates, cylindrical rods and small corner brackets to create the structure. Pre-drilled holes in the angled metal plates provide clear mounting points for fastening and alignment, while the rod elements act as connecting spacers within the rear section. The taillight mount is integrated into the layout, so the build does more than add a bar across the back; it creates a dedicated base for rear detailing in keeping with the truck theme. The silver metal finish gives the parts a technical, workshop-style appearance that suits display builds as well as running models. During a new build or a scale upgrade, this accessory helps shape the rear view of a 1:14 Volvo truck with a more complete and model-specific look. Age marking: 14 years and up. The compact hardware format also suits hobby benches where fitting, aligning and refining truck details are part of the appeal. Warning! Not suitable for children under 14 years.
Li-ion batteries
3.7V Li-Ion Battery RC-Bau, battery, 600 mAh
500608239€14.99
A compact 3.7 V Li-Ion battery pack with 600 mAh capacity brings the specified power supply back to compatible RC construction models. The green shrink-wrapped pack, attached red and black leads, and JST connector create a straightforward replacement format for hobby users working with matching Carson vehicles. This rechargeable battery is listed for the Carson Tractor with front loader and the Carson Bulldozer, where it serves as the stated replacement power unit rather than a general-purpose pack. Li-Ion technology combines the 3.7 V rating and 600 mAh capacity in a small format that suits model applications with limited installation space. The JST connector defines the connection standard, so the pack is intended for models that use this exact plug type. Included: lithium-ion battery. 14 Years marks the recommended age. In the workshop, the pack fits naturally into the regular routine of charging, swapping and returning a compatible model to operation. For RC enthusiasts maintaining construction vehicles, it adds a clearly specified spare or replacement battery option built around 3.7 V output, 600 mAh capacity and a JST connection.
LiPo batteries
7.4V 3600mAh 60C LiPo Battery, RC battery
500608231€34.99
This 7.4 V LiPo battery pack brings 3600 mAh capacity and a 60C discharge rate into RC driving setups that need compact dimensions with strong current delivery. Built as a hardcase pack with a T-plug socket on the main lead, it suits many 1:10 and 1:8 brushed and brushless RC car applications where a clean fit in the battery tray matters as much as output on the track. The lithium polymer cell format is designed for hobby use where quick throttle inputs and sustained load both matter. The label states 26.64 Wh, adding another concrete reference point for the pack's stored energy. Alongside the main power connector, the pack carries a separate balance lead for charging equipment that supports LiPo balancing. The hardcase construction gives the battery a defined rectangular shape that works well with strap-secured chassis layouts commonly used in RC cars. A maximum charging current of 3.6 A sets a clear limit for charger setup and routine workshop use. In practice, this battery fits driving sessions that call for a compact 2-cell power source in off-road and on-road RC cars. It also suits hobby benches where a spare rechargeable pack keeps one chassis ready while another battery is on charge. 14 years is the stated age marking for this RC accessory. Warning! Not suitable for children under 14 years.
Li-ion batteries
7.4V 500mAh Li-Ion Battery, RC battery pack
500608286€11.49
This 7.4V Li-Ion battery pack brings a compact energy source to compatible RC and electronic setups, with 500mAh capacity and 3.7Wh printed on the pack itself. The wrapped pack format, cable lead and JST connector create a tidy layout that suits installations where space and clear connections matter. The specification on the battery gives hobby users concrete charging guidance: fast-charging capability is stated, with a maximum charging current of 1C 500mA. The pack is supplied as a rechargeable accessory rather than a complete vehicle set, making it a practical match for powered models that call for this voltage and connector format. The visible label also states that the battery should be charged before use and that correct polarity must be observed during connection. These details help place the pack correctly within an RC setup and support informed charger selection. In use, the 7.4V output suits compact powered applications where a defined rechargeable supply is needed. After a driving session or bench use, the plug should be disconnected for storage, matching the handling note printed on the battery pack. Warning! Not suitable for children under 14 years.
Batteries
9V Block Alkaline Battery for RC Accessories
500609045€3.49
A 9V block alkaline battery is a straightforward power source for compatible RC accessories and other electronics that use the familiar 6LR61 format. The compact rectangular housing and top snap connectors make handling simple during battery changes, while the alkaline chemistry is ready for use as supplied. This battery is listed as a 9V block alkaline type and corresponds to the common E-block format used across many small electronic applications. The product data also references the 6LR61 designation, a widely recognised size standard when a device calls for a 9V battery. Because this is a primary alkaline battery, it is intended for direct installation in suitable equipment rather than recharging. That makes it a useful spare for hobby storage, maintenance kits and regular replacement cycles where a compatible device needs a fresh power source on hand. In practice, the battery fits naturally into the routine around RC equipment, workshop accessories or portable electronics that rely on a 9V supply. Kept in a field box, tool drawer or parts shelf, it covers those moments when a compatible controller accessory, tester or small device needs a quick battery change to get back into use.
Batteries
AA Alkaline Batteries, 20-Pack Power Cells
500609050€9.99
AA batteries remain one of the most common power formats in RC equipment, and this box brings that standard into a straightforward 20-cell supply. Each battery is specified at 1.5 V and uses the AA size, also identified in the data as Mignon and LR6, so the pack suits devices that label the same format in different ways. The alkaline cell type is supplied ready for immediate use rather than as a rechargeable system, which makes the pack a practical match for equipment that needs fresh replacement batteries on hand. With 20 identical cells in one box, it is easier to keep matching power sources available for transmitters, compact electronic accessories and other battery-operated workshop or household devices. The consistent format also helps when several devices in the same setup draw on the same AA standard. The 14 Years age marking is stated in the product data. In day-to-day use, a 20-pack like this fits well into hobby storage, pit boxes or home drawers where spare LR6 batteries are kept ready for the next battery change. When a controller, accessory or small electronic device calls for 1.5 V AA cells, this multipack provides the required format in a single purchase.
Batteries
AA Alkaline Battery Set, 4-pack cells 1.5V
500609043€2.49
AA batteries remain one of the most widely used power formats in RC equipment, and this set provides 4 alkaline cells in the standard LR6 size with 1.5V output per cell. The familiar AA format suits devices designed for this common battery type and keeps replacement straightforward when matching the specification in the equipment. The designation also appears as MN1500, giving another recognised reference for the same cell category. As alkaline batteries, these cells are intended for direct use rather than recharging, which makes them a practical choice wherever a compatible device calls for non-rechargeable 1.5V AA power. The 4-pack format fits typical battery changes for handheld accessories and other battery-powered equipment. In RC use, that can mean keeping suitable cells ready for transmitters or related accessories that depend on the AA standard. The cylindrical cell shape follows the established format used across a broad range of compatible electronics. This set works well as a straightforward stock of replacement cells for hobby gear, workshop drawers or general battery needs around battery-powered equipment. Where a device specifies AA, LR6 or MN1500 cells with 1.5V output, this pack provides the matching format in a compact 4-cell quantity.
NiMH batteries
Amphi Power Truck Battery Pack, 9.6V NiMH
500608256€21.49
Built around a clearly stated 9.6 V and 600 mAh specification, this NiMH battery pack adds a dedicated power unit for the Amphi Power Truck. The compact pack uses a mini Tamiya plug and fitted power lead, creating a direct connection format that matches the stated application instead of relying on an unspecified connector. As an optional battery, it suits hobby benches that keep a second rechargeable pack ready while another pack is in use or charging. The NiMH cell format gives model enthusiasts a familiar battery type for RC applications, and the 600 mAh rating provides a concrete reference when comparing runtime planning within a compatible setup. The shrink-wrapped pack format keeps the cells grouped in one ready-to-connect unit, while the attached red and black leads make polarity assignment visually clear during handling. The stated 9.6 V rating also gives a precise basis for checking vehicle compatibility before installation. In practical use, this battery pack fits naturally into driving sessions with the Amphi Power Truck, whether as a replacement for an existing pack or as an extra unit prepared in advance. On the workbench, the mini Tamiya connection and defined voltage and capacity make the pack easy to identify among RC power components.
Electronics
Control Switch Dumptrailer-Spindle Drive, switch
500907070€16.29
Built for functional model engineering, the Control Switch Dumptrailer-Spindle Drive adds a dedicated control point to a compatible dump trailer setup. The prewired switch assembly is intended to control the gear motor of the spindle drive with shaft joint 500907056, giving the tipping mechanism a clear electrical interface within the model. The wiring layout combines a BEC connector with 2 free cable ends for connection into the drive circuit. Power is supplied through the BEC connector system and supports 7.2 V NiMH or 7.4 V LiPo accumulator packs, which fits established RC power formats for model-building enthusiasts. With an ampacity of up to 5 A, the switch is specified for the electrical demand of the spindle drive application rather than as a generic on off part. The compact switch format with mounted wiring also suits retrofit work, replacement tasks, or planned installation in a custom trailer build. In use, the switch becomes part of the working dump function, where the spindle drive gear motor can be actuated as the trailer mechanism is operated. Age marking: 14 years and over.
RC servos
CS-9 Servo 9kg/JR, RC servo, regular size
500502024€22.99
The CS-9 Servo 9kg/JR brings regular-size servo control to RC builds that need a compact drive unit with direct mechanical output. With 9 kg torque, a JR connector and a 3-wire lead, it fits into many model setups where steering, throttle or other moving functions are controlled through a servo arm and linkage. The rectangular housing carries mounting tabs for screw fixing, and the splined output shaft accepts different horn layouts for varied linkage geometry. A single-arm horn and a 4-arm cross horn are shown, each with multiple mounting holes that allow different attachment points for rods and control linkages. Rubber grommets sit in the mounting points to isolate the servo during installation, and the central fixing screw secures the horn on the output shaft. The short description states a 0.2 s speed rating and MG specification, adding a concrete performance figure and metal gear construction for hobby applications. In an RC car, the servo can translate steering input into wheel movement through the horn and linkage. In boats, aircraft or other model mechanisms, the same output layout supports controlled motion wherever a compact rotary actuator is needed. The 14 Years age marking places the CS-9 in the hobby category for model-building enthusiasts and RC setups. Warning! Not suitable for children under 14 years.
RC remote controls
FS Reflex Stick II, RC remote control, 6-channel
500501006€109.99
The FS Reflex Stick II brings 2.4 GHz control and a classic dual-stick layout to RC vehicles and boats, with 6 channels operated independently through 2 joysticks, 1 ON/OFF/ON button and 1 ON/OFF/ON switch. Its FHSS system uses Frequency Hopping Spread Spectrum for radio transmission, while the included 6-channel receiver completes the core control package. The radio system runs at 6 V from 4 AA batteries and supplies the BEC receiver with 4.8 - 6 V. Servo reverse on 2.4 GHz changes the direction of assigned channels when a servo reacts opposite to the intended command, and the trim function helps dial in channel response with greater precision. A Graupner J/R plug system supports connection within compatible RC setups. The integrated charging socket adds a direct charging connection within the system. Full compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units makes the set a strong match for expanded truck and function-model installations. On the bench, the 6-channel layout supports coordinated setup of steering, throttle and auxiliary functions before the first run. At the lake or on the track, the dual-stick format and extra switching inputs suit models that need more than basic steering and speed control. 4 AA batteries are required separately.
RC remote controls
FS Reflex Stick Multi Pro, RC radio, 14CH LCD
500501004€159.99
The FS Reflex Stick Multi Pro LCD is a 14-channel 2.4 GHz RC radio system built for complex model setups that need more than basic steering and throttle control. With 2 control sticks, 4 pushbuttons, 4 ON/OFF/ON switches and 2 rotary potentiometers, it gives hobby users direct access to multiple functions on vehicles and vessels, from light and sound to winch, support legs, water pump and water monitor control. Its 15 model memories keep different configurations ready for repeated use across several RC builds. The blue backlit LCD supports menu-based setup and status checks, while the 2.4 GHz FHSS system provides stable signal handling in the 4.8 - 6 V operating range. Servo reverse and trim functions are available for channels, and steering setup can be refined further with Dual Rate for servo path limitation, EPA for servo travel limiting and EXP for response adjustment. The system is also fully compatible with TAMIYA MFC 01/03 and DMD units. A failsafe function adds a defined response if signal transmission is interrupted. Included are a 14-channel 2.4 GHz transmitter, a 14-channel 2.4 GHz receiver and a multilingual handbook. 4 AA batteries are required separately for the transmitter. The Graupner-J/R plug system supports integration into compatible RC electronics, making this radio a strong choice for multi-function trucks, working models and other feature-rich RC machines.
RC combustion engine models
Fuel Bottle 500 ml, filler bottle, measuring scale
500905101€6.99
The Fuel Bottle 500 ml brings a straightforward workshop tool to nitro gasoline RC preparation, combining a 500 ml capacity with a narrow dispensing setup for controlled tank filling. Its translucent bottle body, black screw cap and long blue nozzle create a clear, functional layout that suits bench work before a driving session. Volume markings from 100 to 500 ml are embossed along the side, so the current fill level stays visible while handling fuel. The curved nozzle is shaped for access to tighter tank openings, and the small black angled tip helps place the flow more precisely at the inlet. Hand pressure on the squeeze bottle controls the output directly, which supports measured transfer instead of a broad pour. The cap closes the nozzle when the bottle is not in use, keeping the setup ready between workshop tasks. 1 x tank filler bottle is included. On the workbench, the bottle fits routine filling, topping up and checking quantities before a run. At the track, the marked body and directed nozzle support quick pit preparation when nitro RC models need a clean refill between driving sessions. Warning! Not suitable for children under 14 years.
Model tools
Hex RC Tools 1.5 mm, screwdriver
500908125€8.99
Small hex fasteners are common across RC and model-building work, and this 1.5 mm Hex RC Tools screwdriver is shaped for that exact task. The hardened steel tip is precision-made to sit cleanly in matching screw heads, supporting controlled turning during assembly, maintenance and adjustment on detailed hobby builds. The lightweight aluminium handle gives the tool a balanced feel, while the ergonomic grip supports steady finger placement through repeated bench work. Its slim shaft helps reach screws set deeper inside compact assemblies, where broader tools can obstruct access or reduce control. As part of the CARSON Tool range, this screwdriver is intended for fine screwing applications rather than general household jobs, making it a focused addition to model workshop equipment. The marked 1.5 mm size also helps keep the right driver close at hand when several tool sizes are in use. On the workbench, it fits naturally into routine RC upkeep such as tightening fittings, making small corrections and handling delicate hardware on model components. For hobbyists working on detailed assemblies, the combination of low weight, precise fit and narrow reach supports clean, careful tool handling. Warning! Not suitable for children under 14 years.
Model tools
Hexagon Socket Wrench 2.0 mm RC Tool
500908126€8.79
A 2.0 mm hexagon socket wrench belongs on any model bench where small fasteners need a clean, accurate fit. This Carson Modelsport tool combines a precision-made steel tip with a lightweight aluminium shaft, creating a hand tool shaped for controlled turning during detailed RC maintenance and assembly. The hardened steel tip is made to engage screws securely while helping to protect screw heads in repeated use. Its slim shaft reaches into tighter build areas more easily than bulkier workshop tools, which matters when working around compact chassis layouts and closely spaced components. The aluminium handle keeps the tool light in the hand and adds an easy-grip surface for measured input on delicate fastening jobs. That balance of low weight, grip and tip accuracy makes it suitable for routine servicing, setup changes and careful parts installation. On the hobby bench, the 2.0 mm format suits the kind of fine mechanical work that calls for steady handling rather than excess force. It fits naturally into model-building sessions, repair work and regular upkeep of RC vehicles and other detailed assemblies. Age marking: 14 years+ Warning! Not suitable for children under 14 years.
Model tools
Hexagon Socket Wrench 2.5 mm RC Tool
500908127€8.99
A 2.5 mm hexagon socket wrench belongs on any RC workbench where small fasteners and repeatable control matter. This Carson Modelsport hand tool combines a precision-made hardened steel tip with a long, slim driver format that reaches into tighter assembly points while keeping the turning action direct and clean. The shaft is made from lightweight aluminium and shaped for easy grip, giving the tool a balanced feel during fine mechanical work. Hardened steel at the working end is designed to engage screws accurately and help protect the screw head during regular use. The handle shown with a knurled grip texture and accent rings supports a secure hold when careful adjustment is needed on model components, electronics housings or chassis fittings. The 2.5 mm size makes it a focused addition to an RC tool set rather than a generic workshop driver. On the bench, this wrench fits the rhythm of routine model care, from initial assembly to later maintenance and part changes. It works well for hobby sessions that call for compact reach, clear feedback through the handle and dependable control on smaller hex fittings. Warning! Not suitable for children under 14 years.
Model paints
Italeri AcrylicPaint Fl.Light Ghost Gray 20ml
510004762€3.691 l = €184.50
Italeri AcrylicPaint Fl.Light Ghost Gray 20ml brings a controlled grey-blue shade into model finishing, giving painted sections a muted technical tone that suits careful surface work on an assembly kit. The 20 ml format keeps the colour compact on the workbench while leaving enough paint for repeated detailing steps across a longer build. The product data identifies this as AcrylicPaint in the shade Fl.Light Ghost Gray, so the focus stays on accurate colour application rather than broad mixed-media use. Used during a build with AssemblyRequired listed, the paint fits naturally into staged model work where subassemblies, exterior panels or smaller accents are finished in sequence. The stated assembly time of 600 minutes points to a project with an extended build process, where a dedicated shade can be kept ready for touch-ups and consistent colour matching across separate sessions. The age marking is 14 Years. In practice, this 20 ml paint format works well for bench setups where model parts are painted step by step, whether the task is refining a single section, revisiting a previous coat or adding a final colour pass before the assembly kit is completed. Warning! Not suitable for children under 14 years.
Model paints
Italeri AcrylicPaint Gloss French Blue 20ml
510004659€3.691 l = €184.50
Italeri AcrylicPaint Gloss French Blue 20ml brings a defined gloss colour into model finishing, with a 20 ml volume that fits detailed paint work on assembly kit projects. The French Blue shade gives builders a clear reference when planning colour placement across body panels, trim sections or smaller surface areas that need a consistent finish. As an acrylic paint, it sits naturally within a modelling workflow built around controlled application and step-by-step finishing. The stated use with an assembly kit connects it to builds that unfold over time rather than a single quick session. An assembly time of 600 minutes points to a longer project rhythm, where colour is added after preparation and alongside other finishing stages. The compact 20 ml format is easy to keep with other workshop supplies and suits measured use instead of broad-volume coverage. Gloss paint also changes how light reads across the painted area, giving French Blue surfaces a cleaner, more reflective look than a flat finish. This paint fits projects where a specific blue tone is needed for touch-ups, accent sections or full coloured parts within a larger build. Minimum age 14 Years is stated, placing it within hobby-focused model work that benefits from careful handling, steady application and planned finishing steps.
Li-ion batteries
Li-Ion Power Battery Mini-TAM, RC boat battery
500608147€21.99
This 7.4 V Li-Ion battery pack brings the right power format to compatible RC boat sessions, with an 850 mAh capacity and Mini Tamiya connection for a clean replacement setup. The compact pack is intended as a replacement battery for the RC boats 500108031, 500108032 and 500108033, keeping the specification aligned with those named models. The battery is supplied as an Accu-pack Li-Ion and uses a 7.4 V configuration paired with 850 mAh capacity, a combination that suits the stated replacement role for these Carson RC boat references. The visible pack labeling also states a maximum charging current of 1 C at 850 mA. Attached leads and connectors are already fitted to the pack, so the battery can be connected to the matching system without adding separate wiring. As with any model-sport power component, the connector format matters, and the Mini Tamiya plug gives a concrete compatibility point beyond voltage and capacity alone. In practice, this battery fits naturally into the regular rhythm of RC boating, whether an original pack has reached the end of its service life or a matching spare is needed for the named models. The 14 years+ marking is stated in the product data, and the battery's clearly defined voltage, capacity and plug type make it a focused choice for hobby setups built around those exact specifications.
RC receivers and accessories
Receiver Reflex Stick 2, RC receiver, 2.4 GHz
500501537€42.99
The Reflex Stick 2 receiver brings the core control link of the matching Carson RC system into a compact 45 x 28 x 13 mm format. Designed as a replacement receiver for the Reflex Stick 2 radio system, it combines 6 channels, 2.4 GHz transmission and a clearly arranged connector layout for RC vehicle electronics. The housing carries labelled connections for battery input and channels CH1 through CH6, so the installation points are easy to identify when fitting the unit into a model. An input voltage range of 4.8 to 6 V matches the specified operating window for the receiver and supports integration into the intended radio setup. A setup button is placed directly on the unit, while the LED indicator provides visible status feedback during binding and configuration. This keeps the handling focused on the receiver itself rather than on external programming hardware. In workshop use, the receiver suits repairs, replacement of a damaged unit or the restoration of a Reflex Stick 2 control system to working order. Inside an RC vehicle, the compact footprint helps when space is limited and several connected functions need a clean channel layout. Age marking: 14 years.
RC receivers and accessories
Receiver Reflex Wheel LCD, 7-channel receiver
500501546€35.99
Built as a replacement receiver for the Reflex Wheel LCD 2.4 GHz radio system, this 7-channel unit brings the control link back into compatible RC setups in a compact 35 x 25 x 13 mm format. The small housing, short antenna wire and channel-marked socket strip create a clean technical layout that suits model installations where space and clear wiring matter. The receiver is specified for 2.4 GHz operation and an input voltage of 6 to 11 V. CH1 to CH7 are labelled directly on the unit, making each connection point easy to identify when assigning steering, throttle or auxiliary functions. The visible Analog and Digital selector marking adds another practical hardware detail for matching the receiver to the intended configuration. As a dedicated spare receiver, it is intended for the FS Reflex Wheel LCD 2.4G 7 channel system referenced in the product data rather than as a universal radio component. In workshop use, the compact dimensions help when placing the receiver into tighter chassis layouts, while the marked ports support orderly routing of servo and control leads. Age marking: 14 years. This product conforms to Directive 2014/53/EU.
RC receivers and accessories
Receiver Reflex Wheel PRO 3, RC receiver, 2.4GHz
500501535€29.99
The Receiver Reflex Wheel PRO 3 2.4GHz BEC is a dedicated replacement receiver for the Carson Reflex Wheel PRO 3 BEC RC system. With 5 channels in a compact 45 x 27 x 14 mm format, it brings the core control functions of a model vehicle into a small electronics unit that fits neatly into tight chassis layouts. The black receiver case carries clearly marked ports from CH1 to CH5, making the channel layout easy to follow during installation in compatible RC models. A 2.4 GHz frequency forms the radio link, while the 6 to 8.4 V input range defines the electrical setup for the unit. The housing also shows SET and SW markings, supporting the handling steps needed when integrating the receiver into the matching radio system. As a replacement part, it is intended specifically for the Carson Reflex Wheel PRO 3 BEC system. In workshop use, the compact dimensions help when routing cables through narrow radio boxes or electronics trays in model vehicles. The 5-channel layout also leaves room for functions beyond basic steering and throttle where the compatible setup supports them. Age marking: 14 years.
RC receivers and accessories
Reflex Stick Multi Pro Receiver, RC receiver
500501540€51.99
The Reflex Stick Multi Pro receiver brings 2.4 GHz control technology into a compact replacement unit for the matching RC system. With 14 channels and a housing size of 35 x 26 x 14 mm, it adds extensive connection capacity without taking much room inside a model layout. This spare receiver is specified for 4.8 to 6 V input voltage and is built for the Reflex Stick Multi Pro RC system. The front edge carries clearly marked channel outputs from CH1 to CH14, making the connection layout easy to follow during installation. A dedicated bind button is placed on the receiver for pairing with the compatible transmitter, and the F/S Set function allows fail-safe positions to be stored directly on the unit. The visible Batt. connection marks the receiver power input, while the antenna lead is routed from the housing for signal reception. In workshop use, the receiver suits repairs, system refreshes or the replacement of an existing matched unit in a compatible RC setup. Age marking: 14 Years. Batteries are not included.
RC remote controls
Reflex Wheel X1, RC transmitter, 2.4GHz 2-channel
500500105€47.99
The Reflex Wheel X1 brings 2.4GHz radio control and a classic pistol-grip layout into one focused setup for RC driving. A side steering wheel, trigger throttle and 2 fully proportional channels give fine control over steering and speed, whether the model is lining up for a clean straight or working through tighter corners. At the technical level, the transmitter runs on 4.8 to 6V and pairs with a compact 4-channel mini-receiver measuring 36 x 25 x 15 mm. The receiver power supply supports up to 11V without a BEC, and the Uni connector system J/R broadens compatibility across common hobby installations. A charging socket with positive pole inside is built into the transmitter, and an LED battery status display keeps the power level visible during use. The set is also Tamiya kit compatible, which makes it a practical radio option for many workshop and upgrade projects. Included are a 2-channel 2.4GHz transmitter and a 4-channel 2.4GHz receiver. 14 years marks the recommended age. 4 AA batteries are required separately, so the radio can move straight into bench setup, model installation and the first tuning session once the power supply is in place. Warning! Not suitable for children under 14 years.
RC receivers and accessories
ReflexWheel PRO3 Receiver, RC receiver, 2.4GHz
500501536€31.99
The ReflexWheel PRO3 receiver brings 2.4 GHz control, 5-channel connectivity and a compact 45 x 27 x 14 mm format into one electronics upgrade for compatible RC vehicle setups. Designed as a replacement receiver for the ReflexWheelPro3 BEC waterresistant radio system, it fits the focused, technical character that model-building enthusiasts expect from workshop-ready running gear. Its channel bank is clearly marked from CH1 to CH5, with a separate BEC connection area that helps keep wiring assignments readable during installation. That layout supports the typical control path in model vehicles, from steering and throttle to added switching functions on extra channels. The stated input voltage of 6 to 8.4 V gives a concrete operating range for integration with matching onboard electronics. A dark translucent case keeps the receiver body compact while the attached antenna lead exits cleanly from the housing for straightforward placement inside the chassis. In practice, this receiver suits repair work, system replacement and the refresh of an existing RC setup built around the ReflexWheel PRO3 platform. Whether a workshop bench is set up for maintenance or a vehicle is being returned to running condition after an electronics swap, the compact footprint and labeled ports keep the installation process focused and easy to follow.
NiMH batteries
RX Battery 6V 3000mAh, battery pack, NiMH
500608143€24.99
This 6 V RX battery pack brings a dependable power source to compatible RC electronics and model systems, with 3000 mAh capacity in a rechargeable NiMH format. The pack is built as a wrapped multi-cell unit with attached connection leads, giving hobby setups a ready battery option for receiver-based applications where a separate power pack is required. The battery uses a TAM and JR connection layout, which makes it suitable for compatible systems that match these plugs. Its black wrapped casing holds the cylindrical cells together in one compact assembly, while the fixed red and black cables provide the connection path from pack to electronics. As a receiver battery, it suits workshop preparation, replacement planning, or keeping an additional charged pack on hand for longer sessions with compatible models. Batteries are not included. On the bench, the pack works well as a spare power source for maintenance days, setup changes, or quick swaps between runs in compatible RC vehicles and electronics layouts. The 6 V output and 3000 mAh rating make it a clear, easy-to-match choice when the model setup calls for this battery specification.
Accessories
Scalextric Digital Plug DPR Slot Car Converter
560008515€29.99
Scalextric Digital Plug Quer/Touring DPR brings digital control to compatible slot cars with a compact EasyFit module that connects through the car's existing DPR socket. Once fitted, the car can run on a Scalextric Digital layout, where up to 6 cars can race on one lane and drivers can switch lanes at the press of a button for overtaking and blocking moves. The conversion is built around a direct connection to the braid-to-motor wiring plug, so no complex rewiring is required. Many Scalextric cars produced from 2007 onwards already carry the standard socket needed for this setup. Fitting starts by removing the panel on the base of the car, then connecting the EasyFit Digital Plug and securing it to the chassis with the retaining screw. The process needs only a small screwdriver and takes less than 60 seconds. The compact board and holder sit neatly within the underside space provided by standard DPR Scalextric cars. This accessory suits race nights where analogue-compatible cars are being prepared for digital competition on the same layout system. It also works well as a workshop upgrade part when keeping a favourite Quer or Touring car ready for lane-change racing. Age recommendation: 14 years +
Electronics
Spindle Drive Gearbox-Motor, RC accessory
500907066€55.99
Electric spindle actuation adds a clear mechanical function to model dump trailers and crawler loaders, and this Spindle Drive Gearbox-Motor is built for exactly that task. The geared motor drives the spindle system so the body can be tilted electrically or the load can be unloaded through powered movement rather than manual handling. The unit is designed for use with the spindle drive with shaft joint N° 500907056, where the motor output feeds the spindle mechanism through geared rotation. A square metal output shaft forms the connection point for the drive system, while the integrated gearbox and motor housing keep the assembly focused on controlled motion for lifting tasks. Operation is handled through a remote controlled switch or the CARSON switch N° 500907070, making it suitable for model-building layouts that call for a separately triggered dump function. The stated dimensions are 700 mm in length, 185 mm in width and 235 mm in height. In a working model setup, the geared drive supports realistic tipping action on a dump trailer or electric unloading on a crawler loader. Age marking: 14 Years.
Batteries
1.5V Baby C LR14 Alkaline Set, battery pack
500609046€3.99
This 1.5V Baby C LR14 Alkaline Set contains 2 C-size cells for compatible battery-powered equipment in the RC and hobby space. The Baby, LR14 and MN1400 markings identify the same battery format, making the set easy to match with devices that specify one of these standard designations. The alkaline cell chemistry is named directly in the set title, which helps when a device requires disposable 1.5V batteries rather than a rechargeable pack. With 2 cells in the pack, the set covers equipment that runs on a pair of matching C batteries and offers a practical replacement option for existing setups. The cylindrical cell format follows the common C-size standard used across many portable devices. The product data also states that batteries are not included with the main device, so this set can serve as the separately purchased power source where that battery type is required. In use, the clear voltage and size markings simplify battery selection before a driving session, workshop check or accessory setup. For hobby benches, field boxes and household storage alike, this 2-pack keeps the required Baby C LR14 format close at hand when compatible equipment needs fresh cells. Warning! Not suitable for children under 14 years.
Electronics
1:14 12V Spotlight, model accessory, rectangular
500907578€26.99
Rectangular auxiliary lamps are a familiar detail on working trucks and utility vehicles, and this 1:14 set brings that look into scale form with 2 matching 12V spotlights for model projects. The black lamp bodies, clear textured fronts and compact stem mounts create a purposeful add-on that suits technical vehicle builds. Each light unit is supplied as a separate wired component, making the pair suitable for custom placement wherever the model design calls for extra lamp detail. The rectangular lens format gives a different visual character from round lamps and fits especially well with truck, construction and service-style subjects. The visible internal light element behind the transparent cover adds depth to the front view, while the long cables support integration into compatible electrical layouts. As a dedicated 1:14 accessory, the set is aimed at hobby builds where scale appearance and added lighting equipment are part of the overall finish. Mounted on a roof bar, fixed to a bumper or positioned as work lights on a body section, the 2 lamps expand the visual equipment of a model without changing its core layout. For display builds and running vehicles alike, the pair adds a crisp technical accent that complements detailed 1:14 scenes and conversions.
Models & trailers
1:14 2-Axle Dolly rigid, trailer dolly
500907210€324.99
Road-train combinations depend on the converter dolly between truck and trailer, and this 1:14 2-Axle Dolly rigid brings that transport link into model form with a compact 365 mm chassis and a width of 185 mm. The tandem-axle layout, front drawbar and upper coupling plate create the unmistakable silhouette of a working dolly in freight and Gigaliner scenes. The frame carries 4 wheels and uses a rigid axle setup, while dummy air springs add extra mechanical detail around the running gear. A support leg is integrated at the front section, so the dolly can be positioned as a standalone unit when not attached in a combination. The upper fifth-wheel style coupling area and the towing eye at the drawbar show clearly how the unit is intended to sit between connected trailer sections. Length and height adjustment provide scope to align the dolly within different 1:14 truck layouts. Assembly is required, which makes the chassis and linkage details part of the hands-on model-building appeal. Placed behind a tractor unit or between trailer sections, the dolly suits freight convoys, logistics displays and workshop-style builds with a commercial transport focus. A trailer hitch and a cross brace trailer hitch for the Mercedes-Benz 1850 Overnight Express are required separately. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Alum. Rear Underride protec., accessory
500907619€53.99
A rear underride protection bar is a familiar detail on full-size tippers, and this 1:14 aluminium version brings that same technical look to a scale truck build. The set is designed as an accessory for a 1:14 tipper and uses metal components to create a defined rear assembly with workshop character. The pictured parts show 2 mirrored hinged brackets, 1 flat mounting plate with a large central cutout, 3 cylindrical spacer posts and fastening hardware with black screws and silver hex nuts. That layout gives the assembly several connection points and a stepped construction rather than a single cast piece. The aluminium finish keeps the mechanical character visible, while the separate spacers and plate help form distance and alignment within the mounted structure. For model-building enthusiasts, that means a rear section with more depth, more visible hardware and a more engineered appearance. On a shelf, in a workshop setting or as part of a completed truck project, the accessory adds a purposeful scale detail to the back end of a tipper model. The 1:14 format keeps it aligned with large-scale truck scenes, and the multi-part metal construction suits hobby builds where the visible structure matters as much as the finished look.
Basic accessories
1:14 Alum. Trailer, model accessory, pallet case
500907379€109.99
In 1:14 scale, this Alum. Trailer palette case brings the look of a working freight setup into model truck scenes with a sheet metal body, a flat upper loading surface and a compact lower pallet store. The silver-coloured finish and the side panels with circular cutouts give the accessory a technical warehouse character that suits trailers, depots and loading areas. The construction is arranged around two clearly separated handling zones. The upper deck forms a loading platform for staging cargo operations, while the lower compartment stores the included 6 pallets in a stacked layout. Guide rails and the open front make the pallet area easy to integrate visually into forklift, trailer and warehouse scenarios, and the pull-out section adds a concrete handling element for loading and unloading sequences. Instead of acting as a loose scenery piece, the case creates a defined station within a logistics layout, with storage, access and presentation combined in one compact accessory. Placed beside a trailer, at a loading bay or inside an industrial yard scene, the pallet case helps turn static vehicle displays into more detailed transport settings. Age recommendation: 14 years and up.
Electronics
1:14 Beacon Light Bar Set FH16, RC light set
500907633€144.99
The FH16 is a familiar sight in long-haul truck styling, and this 1:14 Beacon Light Bar Set brings that look into a model build with a dedicated roof light unit and matching control electronics. Designed for 7.2 V and 12 V systems, the set adds a technical lighting function that suits detailed RC truck projects where visible wiring, voltage handling and installation layout all matter. The elongated light bar sits in a grey housing with rounded ends and carries a central LED board fitted with multiple SMD LEDs. Two mounting holes are built into the housing for screw installation, and the cable lead routes the light unit to the separate module. On the controller, terminals marked 1, 2, 3, 4 and + organise the connections, with 4 outputs rated at 500 mA each. A servo-style plug supports integration into the RC setup, while the DIP switch allows selection between Uout=Urc(BEC) and Uout=6.0-14 V. That combination suits scale truck projects where auxiliary lighting is part of the overall finish rather than an afterthought. The set can be worked into a fresh FH16 build or added during an electronics refit, giving the model a more defined roofline and a functional light signature that matches the technical character of RC truck detailing.
Basic accessories
1:14 Construction Platform Long, truck body
500907509€299.99
Built for the TAMIYA Volvo FH16 wood transporter, this 1:14 Construction Platform Long changes the model from a timber hauler into a flatbed body for building materials. The conversion is based on a CNC-milled steel frame with an integrated auxiliary frame, creating a solid mounting structure with the original attachment points and screw connections. The body combines a steel base carrier with CNC-milled aluminium dropsides, each finished with detailed surface engraving on both sides. Powerful Neodym magnets are embedded almost invisibly into the dropsides, so the side panels close cleanly without exposed latches. The loading area measures 550 x 195 x 130 mm, and the approx. 75 mm dropside height gives the body the tall, purposeful look of a working construction transporter. At 2,400 g, the assembled structure adds substantial presence to the chassis, while the real wooden floor application brings a contrasting deck surface that can be finished to match the chosen build style. On the bench, the conversion offers a detailed body project with functional side access and clearly defined metal components. Mounted on the chassis, the open platform suits scenes with pallets, beams or general site cargo, while the fold-down layout supports realistic loading and unloading displays. Rear lights contained within the construction kit can be installed with the separately available aluminium underride guard with rear light holder. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Construction platform short, truck body
500907510€299.99
Heavy transport bodies define the character of a working truck, and this 1:14 Construction platform short brings that look into a compact model format. The short flatbed body combines silver-toned side panels, an open load area and a utility-focused layout that gives a model truck the appearance of a site or materials carrier. The body section is built around metal panels with horizontal embossing, visible screw points and upright corner posts that echo full-size commercial truck construction. A front bulkhead rises behind the cab area, visually separating the load space and strengthening the industrial profile. The cargo floor is shown with a wood-look finish, adding contrast to the metallic side structure and reinforcing the working-truck style. Fold-down style side walls shape the bed perimeter, while the rear section carries realistic utility details that suit display builds and scale transport setups. The multi-part construction also makes this body an engaging addition for model-building enthusiasts who enjoy assembling and detailing truck components. On a finished chassis, the short platform format suits compact heavy truck conversions, workshop builds and construction-themed layouts where a realistic cargo bed matters as much as the cab. Combined with scale loads or used as a clean flatbed display body, it gives 1:14 truck projects a purposeful commercial look.
Basic accessories
1:14 Conversion Kit Materialtrailer, trailer kit
500907649€299.99
This 1:14 Conversion Kit Materialtrailer turns the 3-axle Flatbed Trailer III Steel into a building materials trailer with a more enclosed transport layout and a distinctly commercial road-haulage look. The conversion centres on CNC-milled aluminium dropsides with detailed surface engraving, giving the bodywork a sharper scale finish than plain panel sections. Each of the 9 dropsides is functional, so the trailer can be opened section by section for loading and unloading. The locking system uses neodymium magnets, which keep the side panels closed without interrupting the clean exterior lines. Each dropside is carried on 4 hinges made from 1 mm steel, adding a clearly defined mechanical structure to the moving sections. The dropside posts are plugged in and can be removed when wider access to the bed is needed. With a weight of 2,500 g, the conversion adds substantial hardware to the trailer body rather than decorative trim alone. The set is made to fit only the Carson 500907650 1:14 3-axle Flatbed Trailer III Steel, making it a focused upgrade for model builders who want a different transport configuration on the same base trailer. All parts required for the conversion are included in the scope of delivery, so the trailer can be rebuilt into a materials-hauling version with matching scale detail and working side sections.
Basic accessories
1:14 Cross Brace Trailer Hitch, model accessory
500907185€26.49
In 1:14 scale truck building, the frame hardware shapes how a model comes together visually and mechanically. This cross brace trailer hitch for TAM frame layouts adds a dedicated coupling and support component that fits naturally into detailed commercial vehicle builds. The assembly combines a black metal bracket with an articulated linkage section and visible screw fastening points. Multiple mounting holes on the main bracket create several attachment positions on the frame, while the cross brace layout helps define the rear chassis area with a more technical, scale-focused look. The central joint and long arm indicate adjustable positioning, which is useful when aligning the hitch within a custom truck configuration. As a separate model accessory, the part is aimed at builders who refine frame details rather than leaving the rear section plain. Mounted on a 1:14 truck chassis, the hitch becomes part of a more complete trailer-ready setup for workshop sessions, display builds or ongoing conversion projects. The component also suits enthusiasts who expand an existing TAM frame with extra coupling hardware and more defined rear-end structure.
Basic accessories
1:14 Fliegl Stone Master, spindle drive
500907217€209.99
The 1:14 Fliegl Stone Master spindle drive brings a working mechanical function to a scale trailer build with a metal linkage assembly, cylindrical spindle body and articulated mounting points. Its silver machined construction and exposed pivot hardware give the mechanism the technical look that model-building enthusiasts expect from a functional upgrade rather than a decorative part. At the core of the assembly, the spindle body connects to a forked linkage and round mounting flange, so movement is transferred through several joints instead of a single fixed arm. The instruction data names hardware sizes including 3x10 mm screws, 3x5 mm screws, a 6x12x0.2 mm washer and 10x6 mm spacers in 13.9 mm, 29.9 mm and 9.8 mm lengths, showing how the mechanism is aligned across its pivot points. This gives the build a more technical character, with each spacer and fastener supporting the geometry of the moving assembly. An optional gearbox motor can be fitted for powered operation. Radio gear, a battery pack, a charger and paints are required separately. Mounted into a 1:14 agricultural or transport model scene, the spindle drive adds visible motion and a more authentic operating sequence to tipping action. The exposed linkage, flange mount and multi-part arm structure also make it a strong choice for builders who enjoy mechanical detail that can be seen while the model is in use.
Basic accessories
1:14 LR634 Bucket Protective Grid, Accessory
500907380€68.49
Built for 1:14 scale model work, the LR634 Bucket Protective Grid adds a distinct construction detail to the bucket area with an aluminium part shaped for this specific application. The grid format introduces the slotted guard look associated with working machinery and gives the front assembly a more technical finish in display views. Within a model-building project, this accessory supports accurate restoration, replacement or visual refinement where the bucket section needs the correct protective element. The dedicated LR634 designation keeps the fit focused on the matching model context rather than a generic universal part. Aluminium adds a crisp surface character that suits painted and unpainted construction scenes alike, while the formed profile and mounting holes point to straightforward integration into the intended assembly position. On workshop shelves, diorama bases or completed construction vehicle displays, the part helps the bucket area read as a complete unit rather than an unfinished section. It also suits ongoing rebuilds where worn or missing details need to be brought back into line with the rest of the 1:14 model.
Electronics
1:14 LR634 Electronic Control Unit, RC module
500907103€509.99
Built for the LR634 at 1:14 scale, this electronic control unit concentrates the model's main wired functions in one compact module. The housing measures 85 x 53 x 21 mm, weighs 82 g and combines 5 electronic speed controllers with lighting control and a reversing beeper, creating a central interface for a complex tracked machine layout. The wiring system is arranged for multiple dedicated tasks inside the model. Receiver inputs cover channel 1 to channel 6, and the connected outputs are assigned to the right track motor, left track motor, lift spindle drive, tip spindle drive and rear ripper spindle drive. A rotary potentiometer trims the track balance by up to +/- 10%, which helps correct straight-line running when one track pulls harder than the other. LED status indicators work with 2 push buttons for transmitter alignment and neutral setting. The light connection supports up to 1 A, and the battery input is designed for 7.2 V to 8.4 V systems. In use, the module suits detailed installation projects where several drive and auxiliary functions need coordinated control in one crawler loader model. A battery pack is required separately. The unit also supports voltage monitoring for 7.4 V 2S Li-Po operation, with optical and acoustic low-voltage warning signals during running. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 LR634 Gear Train Drive Set, model part
500907105€209.99
The Liebherr LR 634 is known as a crawler loader format built around traction and drive transmission, and this 1:14 gear train drive component set is made for that mechanical core. Developed for the Liebherr Laderaupe LR 634 No. 500907111, it brings the drivetrain focus of the full model into a dedicated parts set for model-building enthusiasts working on a matching scale project. As a transmission drive set, it supports the functional side of the build where moving force through the drivetrain matters more than surface detailing. The 1:14 scale keeps the set aligned with the proportions of the intended LR 634 model, while the dedicated component purpose makes it suitable for replacement work, mechanical completion or planned workshop preparation. Within a hobby bench setup, this kind of set belongs to the stage where the model's internal drive layout takes shape through the correct matching parts. In practice, the set suits restoration of a used build, completion of an unfinished model or preparation of spare drivetrain components for later maintenance. Age 14 Years. For enthusiasts working on the Liebherr Laderaupe LR 634 No. 500907111, it adds a focused transmission element to scale-accurate model work.
Electronics
1:14 LR634 Gearboxmotor, model spare part
500907108€83.99
Built for the Liebherr LR 634 in 1:14 scale, this gearbox motor serves the powered shovel and rear ripper functions with a dedicated drive layout for the model's working mechanisms. The compact unit combines an electric motor with a metal gearbox and output shaft, creating the geared motion needed where direct motor speed would be too high for controlled actuation. The technical data gives a clear picture of its operating range: rated voltage is 7.2 V, with a working voltage from 5 to 8 V. No-load speed reaches 560 rpm, while constant speed is specified at 440 rpm. A 63:1 transmission reduces speed at the output and supports the stated constancy torque of 105 mNm for mechanical movement under load. Electrical values include 360 mA no-load current and 1.4 A steady current, which helps when matching the replacement unit to the existing installation and drive setup. At 26 g, the motor remains compact for integration into the LR 634 mechanism without adding unnecessary mass to the moving assembly. As a model spare part, it suits repair work, maintenance, or the restoration of powered shovel and ripper operation on the tracked loader. Age 14+
Basic accessories
1:14 LR634 Lift & Shovel Spindle Drive Set
500907102€689.99
The LR634 Lift & Shovel Spindle Drive Set is a 1:14 accessory created for the Liebherr Laderaupe LR 634 No. 500907111. Its spindle-drive layout is dedicated to the lift and shovel area, bringing a function-led mechanical upgrade to this scale crawler model. Within a model-building project, the set focuses on the front working equipment where lifting and shovel movement define the machine's character. The spindle-drive concept points to controlled actuation for these assemblies and fits the technical theme of construction-machine modelling. Because the set is specified for the Liebherr Laderaupe LR 634, it stays closely tied to the geometry and purpose of that particular model rather than serving as a generic add-on. The 1:14 scale keeps the accessory aligned with the proportions of the compatible crawler and makes it a relevant choice for detailed workshop planning. In a display-oriented build, the drive set adds substance to the functional side of the model. In an active hobby setup, it supports a more equipment-focused configuration of the LR 634 front end, with the lift and shovel area placed at the centre of the build.
Basic accessories
1:14 Plateau Goldhofer, model accessory set
500907621€46.99
Heavy haulage trailers from Goldhofer are closely tied to specialist transport, where low platforms and modular structures are built to carry demanding loads. This 1:14 Plateau Goldhofer set brings that workshop character into model form with separate body components that build up a defined section for a scale transport project. The set is presented as an assembly-based accessory for the 1:14 Plateau Goldhofer and includes a large square panel with 4 mounting holes, a long narrow panel, 4 matching side elements, plus black screws and silver hex nuts. The grey moulded sections show recessed groove detailing, while the white panel surfaces create a clear contrast that makes the structural layout easy to read once assembled. The individual parts are arranged for fastening rather than clipping, so the build develops through aligned placement and fixed connections. Age marking: 14 Years. On a hobby bench, the set suits careful fitting, fastening and finishing as part of a larger scale truck or trailer scene. In a completed display or running model setup, the added section extends the technical look of the Plateau Goldhofer with the measured, mechanical character that makes transport models so appealing.
Basic accessories
1:14 Riedler accessory kit, trailer fittings
500907623€71.99
Heavy transport trailers rely on visible working details, and this 1:14 accessory kit brings that character to the Riedler 2-axle stanchion trailer. Built as an optional upgrade, the set adds functional-looking hardware that gives the trailer a more complete scale presence in workshop scenes, loading layouts and road transport displays. The kit combines a spare wheel assembly, an aluminium spare wheel holder, 2 compressed air tanks and a load securing kit. The compressed air tanks are cut from solid aluminium, giving these parts a distinctly technical finish that suits the mechanical look of a commercial trailer. The spare wheel is specified as a wide chrome wheel with wide tyres, adding a strong visual contrast beside the trailer frame and underbody areas. Together, these components extend the trailer with details that model-building enthusiasts often look for when refining a transport rig beyond the base configuration. Age 14 Years. As part of a 1:14 setup, the accessory kit fits naturally into detailed truck and trailer projects where mounting hardware, air system elements and cargo securing parts help shape a more convincing overall build. The set works especially well in scenes focused on freight handling, parked trailer presentation or a fully equipped road-going combination. Warning! Not suitable for children under 14 years.
RC truck accessories
1:14 Servo Mount 2SGB Arocs, servo mount set
500907701€31.49
Built for detailed 1:14 truck work, the Servo Mount 2SGB Arocs Plate is a dedicated servo mount set for the steering axle of 907700. The set brings together the core hardware needed for this installation, including 2 metal angle brackets, a long threaded rod and 2 rod-end connectors, creating a defined mechanical basis for steering linkage setup. The two brackets use multiple mounting holes to support positioning within the axle area, while the threaded rod and rod-end style ends allow the linkage connection to be adjusted as the steering geometry is set. Alongside these main parts, the set includes 10 hex nuts, 4 washers and 10 screws for fastening and assembly. This makes the pack useful not only for first installation, but also for replacing worn or missing mounting hardware on an existing build. The compact component mix focuses on the mechanical connection itself rather than decorative parts, which suits workshop-oriented model projects where fit and linkage alignment matter. On the bench, the set supports repair, rebuild and upgrade work on compatible 1:14 truck models. It fits naturally into hobby sessions centered on axle setup, steering correction and chassis maintenance, where the right brackets, connectors and fastening parts keep the installation process focused and precise. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Spindle Drive, dump trailer accessory
500907056€184.99
Heavy transport models gain a more technical working function with this 1:14 spindle drive for dump trailers. The mechanism is designed to let the dumper body tilt electrically for unloading, bringing a clear mechanical action into construction, logistics or site-focused model scenes. The assembly uses a spindle drive with shaft joint to convert motor power into the lifting movement needed at the trailer body. An optional gear motor with the reference 500907066 is required for the electric drive. For control, a remote-controlled switch or the Carson switch with the reference 500907070 can be used. The mechanism measures 700 mm in length, 185 mm in width and 235 mm in height, giving the installation a defined format for larger 1:14 trailer builds. The visible linkage, brackets and fasteners underline its role as a dedicated functional accessory rather than a decorative add-on. Installed on a matching dump trailer, the mechanism supports realistic loading and unloading sequences on the workbench, in a display yard or during active driving sessions. Age marking: 14 years.
Basic accessories
1:14 Trailer E-Sup.Legs, trailer support legs
500907218€129.99
Support legs are a defining detail on a scale semi-trailer, and this 1:14 Trailer E-Sup.Legs set brings that parked-trailer function into a model build with a compact machined metal design. The rectangular housings, visible inner guide area and round foot plates create the technical look of trailer landing legs while adding a working support component to compatible Carson trailer projects. The set is intended for 1:14 Carson trailer models and fits the compatible ranges named in the data, including the 3-axle trailer chassis, Fliegl Stone Master dump trailer, Goldhofer BAU STN-L3 low loader, curtain-side semi-trailer, flatbed semi-trailer, log stake semi-trailer and box semi-trailer. The construction is prepared for the optional 500907199 gearbox motor, with 2 motor units required for a powered setup. The motor is sold separately. Assembly includes screw fixing, alignment of the support-leg mechanism and a 3 mm drilled mounting hole where required by the installation guide. Once fitted, the support legs add a realistic uncoupled-trailer stance to workshop scenes, yard layouts and road-transport displays in 1:14 scale. They also suit builders refining an existing trailer with more authentic operating detail, whether the model is set up as a dump trailer, low loader or 3-axle semi-trailer.
Basic accessories
1:14 Trailer Pallet Case, trailer accessory
500907651€139.99
Built around the look and function of a real trailer storage compartment, this 1:14 pallet case adds a convincing logistics detail to scale transport models. The housing is made from laser-cut and CNC-bent sheet steel, giving the accessory a crisp, technical form that suits commercial trailer scenes and underbody mounting positions. The interior offers room for up to 24 pallets, so the case can serve as more than a visual add-on when a trailer setup calls for organised cargo handling. A flap with neodymium magnets closes the compartment and recreates the handling of a working storage box with a clear mechanical action. The set includes 6 Euro pallets, which establish the loading theme immediately and give the compartment a filled, operational appearance. Electronic components can also be accommodated in the box when a model build needs that space. Assembly instructions are included. 14 years+ marks the recommended age. The pallet case is designed as an extension for the Carson 3-Axle Stanchion Trailer and the 3-Axle Flatbed Trailer III. In a depot layout, loading bay scene or road transport display, the metal case and stacked pallets add the kind of small-scale detail that makes a trailer combination look equipped for daily freight work.
RC truck accessories
1:14 Volvo 750 taillight PCB, model accessory
500907702€85.99
Heavy road trucks rely on clear rear light signatures, and this 1:14 taillight PCB set brings that look into model form for the Volvo 750. The set combines 2 electronic boards with matching left and right housing parts, adding a defined rear lighting assembly that suits detailed truck builds and scale-focused upgrades. Each board is wired and fitted with several light positions, including red, white and amber elements, so the rear section can be equipped with distinct light zones rather than a single undifferentiated lamp area. The supplied black housings include separate insert pieces and feature the mounting structure needed to position the electronics within the rear body area. Because the set is specified for 7.2 V and 12 V operation, it can be integrated into compatible model truck electrical layouts that use either voltage standard. The mirrored arrangement of the 2 assemblies also matches the left and right side structure typically required at the rear of a scale truck. This accessory suits 1:14 truck projects where the rear end is being rebuilt, upgraded or finished with more defined lighting hardware. It also fits workshop-style builds that focus on wiring, body detailing and scale presentation as much as driving. Warning! Not suitable for children under 14 years.
RC truck accessories
1:14 Warning Bar/Strobe Set, model accessory
500907697€114.99
Heavy transport trucks often carry roof-mounted warning lights to mark out their role on demanding road and site work, and this 1:14 Warning Bar/Strobe Set brings that visual language into a scale build. Made for Scania 8x4/4 and Scania SLT8x4 models, the accessory set adds an illuminated light signature that changes the character of the cab with a more purposeful working-truck appearance. The combination of a long warning bar and separate strobe lights creates a multi-part roof layout rather than a single light point. Amber translucent housings shape the signal effect clearly, while the compact format suits the proportions of a 1:14 truck model. As a model supply accessory, the set is aimed at builders who want to refine an existing vehicle with extra lighting detail tied to a specific Scania configuration. The focus stays on the roof area, where warning lights are especially visible in front-facing display angles and during running sessions. On a shelf, in a workshop-style diorama, or out on a driving course, the lighting set gives the truck a more specialised presence. It suits service, haulage, and site-support styling themes and adds a distinct finishing touch to a detailed Scania build. Warning! Not suitable for children under 14 years.
NiMH batteries
7.2V 2700mAh NiMH Battery Pack, RC accessory
500608097€29.99
This 6-cell sub-C NiMH battery pack brings a defined 7.2 V and 2700 mAh power setup to compatible RC vehicle builds, with a hump version layout shaped for models such as Sand Scorcher and Buggy Champ. The compact pack format, visible wiring and TAMIYA connector system suit hobby setups where the battery must match both the chassis space and the installed plug standard. Its 110 x 48 x 42 mm dimensions give a clear reference when checking battery compartments, while the approximate 335 g weight helps place the pack within the overall vehicle setup. NiMH chemistry makes it a rechargeable option for repeated running sessions, and the 6-cell arrangement forms the stated voltage through a pack shape commonly used in classic buggy layouts. The connector is already attached to the red and black leads, so the pack is prepared for the matching connection type rather than requiring a separate plug change. Age marking: 14 years. As a replacement pack, it suits workshop shelves, spare battery rotation and rebuilds of compatible electric RC models. In running use, the stated voltage, capacity and pack shape support a setup planned around known dimensions, known connector format and a battery layout intended for the specified vehicle types. Warning! Not suitable for children under 14 years.
NiMH batteries
7.2V 4800mAh NiMH Race Battery, RC battery
500608228€43.99
Built for hobby-grade electric models, this 7.2 V NiMH race battery combines a 4800 mAh capacity with a Tamiya connector system for use in RC vehicles and other model building applications. The bundled cylindrical-cell pack format keeps the power source compact and easy to place in compatible chassis layouts, while the cable lead and plug connection support straightforward installation in suitable battery compartments. Nickel-metal hydride chemistry makes this pack a practical choice for enthusiasts running compatible electric setups that call for a 7.2 V battery format. The stated maximum charging current of 4.8 A supports a quicker return to the bench or track when paired with suitable charging equipment. Its high-current discharge characteristic suits applications that place a stronger demand on the power source, whether in on-road models, buggies or other electric RC platforms that match the connector and voltage requirements. With age marking 14 Years, the pack fits naturally into hobby-focused RC use and workshop setups. It works as a replacement battery for compatible vehicles or as a power option for other model building projects that use the same voltage class and connector style.
NiMH batteries
8.4V 800mAh NiMH Battery, Pickup Crawler spare
500608264€27.99
This 8.4 V NiMH battery pack is specified as a replacement power source for the Pickup Crawler models 500404240 and 500404241. With 800 mAh capacity and a TAMIYA connector, it is built around the connection format and voltage class stated for that crawler application. The NiMH cell setup makes this pack a straightforward spare for RC running sessions where a dedicated second battery helps keep the vehicle in use between charges. The shrink-wrapped pack format groups multiple cells into one compact unit, while the attached lead and plug keep the connection layout ready for the named model range. As a replacement battery, it focuses on the core requirement of the vehicle rather than universal fit, which keeps compatibility clear and specific. The scope of delivery states 1 battery pack. In use, the pack serves as the direct energy source for the compatible Pickup Crawler, whether replacing a worn battery or extending driving time with a charged spare kept on hand. For over 30 years, Carson has specialised in remote-controlled vehicles, building detailed, durable models made for plenty of driving fun
NiMH batteries
9.6V 1500mAh Power Battery TAM, RC battery
500608229€20.49
This 9.6 V NiMH battery pack brings compact rechargeable power to RC vehicles and other model building applications that use a Tamiya connector system. With 1500 mAh capacity, the pack supports running sessions that call for a straightforward power source in a familiar hobby format. The nickel-metal hydride cell format makes this pack a practical match for setups built around 9.6 V battery operation. Its Tamiya connector system links the pack to compatible electronics through the attached lead, keeping installation focused on the connection standard already used in many RC and workshop applications. The stated maximum charging current is 1.5 A, giving a clear specification for charger matching. Product data also states an age marking of 14 years+. Whether used as a replacement pack for an RC vehicle or kept ready for other model building tasks, this battery fits neatly into hobby benches, pit boxes and regular running routines. A suitable charger is required separately.