Reflex 6/14Ch Switch 4, switch module, 4-channel

The Reflex 6/14Ch Switch 4 adds 4 extra switching functions to an RC setup through one receiver channel, turning button, switch or joystick inputs into separate output commands. Its compact 16 x 14 x 4 mm housing and approx. 10 g weight suit installations where space is limited and clean wiring matters. The module connects directly to the RC receiver and evaluates both control position and input duration, so short and long movements in the up and down directions can trigger different outputs. That switching logic gives access to 4 separate NPN outputs, each rated for up to 2.5 A and a maximum switching voltage of 16 V/DC. Every output uses a 200 mm blue silicone cable with 0.25 mm² cross-section and is connected to the negative pole of the load. The black negative cable also measures 200 mm, uses 0.5 mm² cable cross-section, and can be connected directly to the battery or a distribution terminal. Input voltage is 4 to 8 V/DC, with 5.0 to 5.5 V/DC supplied from the receiver, and input current is approx. 18 mA at 5.0 V/DC. A 300 mm servo connection with UNI system supplies the module itself from the receiver, keeping the layout straightforward in model cars, trucks or other RC builds with added electrical functions. For high loads, the black cable is connected to the distribution terminal or drive battery to prevent damage to the receiver. Age marking: 14+

 

Warning! Not suitable for children under 14 years.