Screws

Name: Drakuro Ball Studs, model spare part set
Brand: Carson
SKU: 500406066
Price: 6.49 EUR
Availability: InStock

Carson screws are tailored to the specific demands of model building. Made from durable steel or stainless steel, they ensure a secure hold and lasting connections – perfect for repairs, modifications, and fine detailing.

Screws

Drakuro Ball Studs, model spare part set

500406066

€6.49

The Drakuro Ball Studs set is a dedicated spare part for the 1:8 4WD Drakuro chassis and targets one of the small but essential connection points in the running gear. Ball studs sit at moving linkages where clean articulation matters, so replacing worn hardware can help bring back accurate mechanical response in the chassis layout. The set is listed for the Drakuro BL 3S platform and matches the anthracite/red 500409096 and blue 500409097 versions named in the data. With 4 ball studs plus 2 additional pieces, the pack provides a defined quantity for repair work rather than a generic mixed hardware selection. That makes it useful for planned maintenance, for replacing damaged linkage points after demanding runs, or for keeping the correct small parts on hand in the workshop. As a model spare part, the focus stays on fit within the named platform instead of broad compatibility claims. In practical use, this set suits bench repairs when steering or suspension connections need fresh hardware on the Drakuro chassis. It also fits neatly into a spares collection for 1:8 4WD running sessions, where the right replacement part can keep maintenance work focused and efficient. Warning! Not suitable for children under 14 years.

New

Screws

Drakuro Spring Retainers, chassis parts

500406072

€6.99

The Drakuro Spring retainers & ball studs set supplies the exact shock absorber hardware named for the 1:8 4WD chassis. With 4 spring plates and 4 ball joints, the pack focuses on the suspension connection points that link the dampers to the chassis layout and keep the mounting arrangement complete. The set is assigned to the Drakuro BL 3S platform and matches the anthracite/red 500409096 and blue 500409097 versions listed in the data. That makes it a clear maintenance choice when worn or missing shock absorber fittings need to be replaced with the stated component type. Spring plates and ball joints sit at a functional point in the suspension system, where accurate seating and free movement matter for clean installation. As a dedicated spare-parts set rather than a mixed hardware bundle, it keeps the repair focused on the exact area named in the specification. In workshop use, the parts suit routine servicing after heavy running, inspection of the damper mounts, or a targeted refresh during chassis upkeep. For model-building enthusiasts, this kind of model-specific hardware helps keep a Drakuro 1:8 4WD setup aligned with its intended suspension layout. Warning! Not suitable for children under 14 years.

New

Screws

M2 Ball Head Adjuster Set, model accessory, steel

500907587

€7.29

Small linkage parts make a big difference when a model needs clean movement and precise adjustment. This M2 Ball Head Adjuster Set combines steel ball heads, matching adjusters and hex nuts in a 5-piece hardware set for articulated connections in model assemblies, where pivoting joints are needed instead of fixed mounting points. The steel ball heads use threaded shafts for fastening, while the separate hex nuts secure each mounting point from the back. The adjusters connect to the spherical heads as ball cups, creating joints that can move through changing angles during operation. The elongated hexagonal body shape gives a practical contact area during installation and alignment, especially where linkage geometry needs careful setup. With 5 matching connection sets in one pack, the hardware suits multiple mounting points within the same assembly or provides spare parts for maintenance work. This set fits naturally into steering linkages, suspension-style connections and other articulated mechanisms used in model building. It also works well for replacing worn joint hardware where free movement and a compact threaded fixing are required. Age marking: 14 years.

Screws

M3 Ball Head Adjuster Set, model accessory, steel

500907588

€7.29

M3 hardware is a staple of many RC and model assemblies, and this set brings together 5 steel ball heads, 5 adjusters and 5 hex nuts in one matched group for linkage work. The ball studs fasten by threaded shaft and nut, while the socket-style adjusters connect over the ball heads to create a movable joint that suits steering, suspension or similar control linkages. The steel construction applies to the ball heads, giving the contact point a solid metal basis where repeated movement and secure fastening matter. Each adjuster uses an elongated hexagonal body shape that provides a defined grip area during fitting and alignment. With M3 sizing stated directly in the designation, the set supports replacement work on worn linkage points as well as fresh assembly on compatible model mechanisms. The 5-piece count of each main component keeps the hardware consistent across several connection points instead of mixing unmatched parts. On the bench, the set suits routine maintenance, targeted repairs and planned setup changes where a ball-joint connection is required. It also fits neatly into a spares assortment for model enthusiasts who keep common fastening and linkage sizes ready for ongoing workshop use.

Screws

Virus 4.0 Screw Kit, model hardware set

500205932

€49.99

The Virus 4.0 Screw Kit brings together a broad range of replacement fasteners for model maintenance, rebuild work and parts fitting around the Virus 4.0 platform. Packed by size and type, the assortment supports clean identification during workshop sessions where the right thread, head shape and length matter for a precise fit. The set includes flat head, round head, cap and set screws, along with additional metric hardware marked M2.5 and M3. Sizes shown in the kit span from compact 2x9 pieces up to longer formats such as 3x28, 3x40, 4x10 and 4x16, covering a wide spread of fastening jobs across different assemblies. Quantities vary by reference, with examples including 1-piece replacements, 4-piece packs, 6-piece packs, 8-piece packs, 10-piece packs, 20-piece packs, 26-piece packs and 30-piece packs. This spread makes the kit useful both for replacing a missing fastener and for refreshing multiple mounting points in one service pass. Separate labelled bags keep the hardware grouped for quick sorting on the bench, which helps when comparing lengths and head styles before installation. For model-building enthusiasts, that clear structure supports methodical repair work, routine upkeep and the steady progress of a full strip-down or reassembly session. Warning! Not suitable for children under 14 years.

Screws

Virus Akuma Screw Set for RC Models

500405589

€49.99

The Virus and Akuma platform relies on many small fasteners, and this screw set gathers a broad selection for workshop use across several compatible Carson models. It is specified for Virus 4.0, 4.1, 4.2, 4.3, Race and Akuma variants, making it a practical spare set when original hardware is missing, worn or sorted out during servicing. The listed screw mix covers several head styles and dimensions shown in the product data, including cap screws, flat head screws, round head screws and set screws. Quantities in the image data indicate a larger assorted pack rather than a single fastener type, which suits routine chassis work where different mounting points call for different formats. This kind of hardware set supports rebuilds, part replacement and general upkeep on compatible RC vehicles without forcing a search for each screw separately. The set is intended as model accessory hardware rather than as a standalone driving component. On the bench, the assortment fits the moments when suspension parts, chassis sections or mounted components need the correct replacement screw at hand. For hobby rooms, pit boxes and spare parts drawers, it adds a focused stock of compatible fastening hardware for Carson Virus and Akuma model maintenance. Warning! Not suitable for children under 14 years.

Screws

Virus-Ex Screw-Set, model hardware set

500405958

soon available again

The Virus-Ex Screw-Set brings together a workshop-ready selection of model fasteners for maintenance, rebuilds and parts replacement on compatible Virus-Ex assemblies. Clear labelled bags sort each type by size, making it easier to identify the required hardware before fitting and helping keep bench work orderly when several connection points need different screws. The set covers a wide spread of formats, including button head screws, cap head screws, countersunk screws, flat head screws, grub screws and nyloc nuts. Sizes shown in the set include 2x5, 2x8, 2x10, 2x12, 3x3, 3x5, 3x8, 3x12, 3x14, 3x16, 3x20, 3x25, 3x30, 3x40, 4x8, 4x10, 4x15, 4x25, 4x45, M2.5, M3 and M4 variants. With 10 pieces per labelled bag, the assortment supports repeated service jobs and gives hobby work a more systematic parts supply than relying on leftover mixed hardware. Age 14 Years. On the workbench, that range helps when replacing lost screws after routine running sessions, matching fresh hardware to stripped fittings, or preparing a model for a more complete rebuild with the correct head style and thread size close at hand. Warning! Not suitable for children under 14 years.