Ball bearings
Carson ball bearings improve your model’s performance through minimal friction and smooth rotation. Choose from various sizes, seals, and types – for greater efficiency, longer life, and stable performance.
Ball bearings
Carson ball bearings improve your model’s performance through minimal friction and smooth rotation. Choose from various sizes, seals, and types – for greater efficiency, longer life, and stable performance.
More
Ball bearings
1:10 XS Bearing Set, RC accessory
500405935€18.29
This 1:10 XS Bearing Set is made for Carson XS-Chassis vehicles and brings 15 bearing components together for maintenance, repair or replacement work on key rotating points. The set is listed for the XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363, covering Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants named in the data. Ball bearings are used where axles, wheels or drivetrain parts need clean, low-friction movement, and this set supports that function with matching components sized for the chassis family above. The product image shows a mix of larger sealed bearings and smaller metal bearing parts, giving the set the range needed for different mounting points within the model. That makes it a practical choice when a running chassis needs fresh rolling hardware rather than a full rebuild of unrelated parts. In workshop use, the set fits naturally into routine servicing after repeated driving sessions, or into a focused chassis refresh before the next run. It also suits hobby benches where a compatible spare set is kept ready for the XS platform, so repair work can stay centred on the drivetrain and rotating assemblies named for this bearing layout.
Ball bearings
Ball bearing 10x15x4, model accessory, 10-pack
500904019€13.99
Small precision parts make a visible difference in model mechanics, and this set brings 10 ball bearings in the 10 x 15 x 4 mm size for compact rotating assemblies. The metal bearings suit hobby work from 14 years and up where exact dimensions are needed for replacement, maintenance, or fresh installation in a model setup. Each bearing uses the stated 10 mm inner diameter, 15 mm outer diameter, and 4 mm width format, giving a clear reference for matching existing bearing seats and axle points. The pack count of 10 supports workshop stock as well as multi-point servicing on a single build. In model applications, ball bearings are used where shafts and rotating parts need guided movement inside a tight mechanical layout. The compact format makes them relevant for assemblies where space around the axle or housing is limited. This set works well for planned repair sessions, parts replacement after wear, or keeping matching spares ready alongside other model supplies. The uniform size across all 10 bearings helps maintain consistency when several positions in the same assembly require the same specification. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 3x6x2,5, model accessory
500904001€13.99
This 3x6x2,5 ball bearing set brings a core workshop consumable into model maintenance with 10 matching bearings for repairs, rebuilds and routine parts replacement. The compact format suits assemblies that rely on small rotating hardware, and the metal construction matches the technical character expected in model servicing. The 10-piece count gives a useful reserve for ongoing bench work, whether a single bearing needs changing or several matching points in one assembly are being refreshed together. The supplied storage tubes help keep the bearings grouped by size between jobs, which is especially useful when a work area already holds screws, axles and other small hardware. With one clearly defined bearing size, the set stays focused on compatibility for applications that require 3x6x2,5 dimensions rather than mixing formats in one pack. On an RC or model-building bench, these bearings fit naturally into regular upkeep, from replacing worn running parts to preparing spares before a rebuild starts. The set also suits organised parts storage, where clearly separated small components speed up maintenance and reduce time spent sorting through mixed hardware. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 3x7x3, model accessory, 10-pack
500904002€13.99
Ball bearings are a core detail in model mechanics, and this 10-pack brings the exact 3 x 7 x 3 mm size into the workshop for precise replacement and setup work. The compact format suits small rotating assemblies where clean running and an accurate fit matter, whether the bearing is used in a fresh build or during routine maintenance. Each bearing is a metal component designed for model applications that rely on controlled rotation at compact mounting points. The pack of 10 supports repeated service jobs, keeps matching spares together and helps maintain consistency across assemblies that use the same dimension. The 3 mm inner diameter, 7 mm outer diameter and 3 mm width make the size easy to match against existing parts before installation. This makes the set useful for hobby benches where exact dimensions guide part choice more than broad category labels. In practice, the bearings fit naturally into repair sessions, rebuilds and parts organisation for model projects from 14 years. Stored as a dedicated size set, they are ready when a worn bearing needs replacing or when a mechanical assembly calls for the same format at several rotating points. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 4x8x3, RC spare part, 10-pack
500904004€13.99
Small bearings make a big difference wherever rotating parts need a clean, precise running action. This 10-piece set of ball bearings in 4 x 8 x 3 mm format brings a compact spare-parts solution to model building, workshop upkeep and routine replacement work on hobby machines. Each bearing is sized for fine mechanical assemblies where limited space calls for a compact outer diameter and a slim 3 mm width. The metal construction suits repeated installation in small rotating points such as hubs, shafts or axle-mounted components, where reduced friction supports smoother movement than a plain bushing setup. With 10 matching bearings in one pack, the set also helps keep servicing consistent across multiple positions in the same build instead of mixing different sizes. The format works well for restocking a pit box, organising a parts drawer or preparing a rebuild bench before maintenance starts. Whether the task is replacing worn running gear bearings or keeping fresh spares ready for the next repair session, the 4 x 8 x 3 mm size gives model-building enthusiasts a clear, exact reference for compatible mechanical jobs. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 4x9x4, model accessory, 10-pack
500904005€13.99
Ball bearings are a core part of smooth-running model mechanics, and this 10-pack in 4x9x4 mm format supplies a compact, exact-size solution for hobby builds, servicing tasks, and part replacement. The metal construction suits rotating assemblies where a small bearing is needed to guide shafts or axles with a clean, precise running action. Each bearing measures 4x9x4 mm, making the set useful wherever this specific inner diameter, outer diameter, and width are required in a model setup. With 10 matching bearings in one pack, several mounting points can be equipped in one session, or spare pieces can stay ready for later maintenance. The format shown in the product data focuses on a miniature bearing size often used in detailed mechanical layouts rather than large hardware applications. In the workshop, the set supports routine replacement of worn running parts, careful rebuilding of compact assemblies, or stocking common service components for future projects. The age marking of 14 years and up matches the small-part character of this accessory and the precise handling involved in model-building and repair work. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 5x10x4, RC spare part, set of 10
500904008€13.99
Ball bearings are among the smallest parts in a model, yet they shape how smoothly a drivetrain or rotating assembly works. This set contains 10 shielded ball bearings in 5 x 10 x 4 mm size, giving model builders a precise spare part for compatible RC and mechanical applications. The compact format suits installations where a clean seat and controlled rotation matter. Each bearing uses an inner ring, outer ring and shielded sides to support guided movement at matching mounting points. In model workshops, parts in this size can be used at axles, transmission points or other rotating assemblies where the specified dimensions are required. The pack of 10 also makes the set practical for routine maintenance, since several positions on one model can call for matching bearings. Whether used to replace worn parts or to stock the bench for future service work, the set adds a useful supply of identical running components. For hobbyists working on RC vehicles and model mechanisms, exact dimensions such as 5 x 10 x 4 mm are the key detail for selecting the right bearing for the job. Warning! Not suitable for children under 14 years.
Ball bearings
Ball bearing 5x11x4, model accessory, 10-pack
500904009€13.99
Ball bearings are among the smallest parts in a model build, yet they shape how a drivetrain, axle or transmission feels in motion. This set provides 10 shielded ball bearings in 5 x 11 x 4 mm format for model applications that rely on clean, controlled rotation. The metal bearings are suited to rotating assemblies such as shafts, wheel mounts and gearbox positions where a matching size is required. Their compact dimensions make them useful for replacement work on worn running gear as well as for fresh assembly projects that call for this exact bearing format. In workshop use, a pack of 10 gives a practical quantity for servicing several mounting points within one vehicle or for keeping spares ready between rebuilds. The shielded design supports tidy running in enclosed mechanical areas where dependable movement matters. With age marking 14 years+, the set fits hobby-focused model work rather than entry-level play use. Whether the task is restoring freer movement to a used chassis, refreshing a transmission during maintenance, or stocking the bench with essential wear parts, these 5 x 11 x 4 mm bearings add a precise mechanical component that belongs in regular model service. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 5x8x2.5 mm, Model Spare Part
500904006€13.99
This set of 10 ball bearings in 5 x 8 x 2.5 mm brings a precise spare-part format to model maintenance and compact mechanical assemblies. The small metal bearing size suits applications where a matching inner diameter, outer diameter and width are needed to restore clean rotation in a confined space. Loose bearings are shown alongside clear storage tubes, keeping the matching parts grouped between workshop sessions and making it easier to keep identical replacements on hand. In hobby models and RC running gear, miniature bearings of this size can be used wherever a rotating shaft needs guided support inside a compact housing. The metal construction fits the technical character of repair benches, parts boxes and regular servicing routines. With 10 identical pieces in one pack, the set also supports replacing several wear points with the same dimension rather than mixing sizes. The 5 x 8 x 2.5 mm format suits careful rebuilds, routine maintenance and stocking up on frequently used spares for model work. Age marking: 14 years and up. Whether the task is refreshing a rolling assembly or preparing backup parts for future repairs, this bearing set adds a clear, exact dimension to the workshop drawer. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 5x9x3, model accessory, set of 10
500904007€13.99
Small bearings make a big difference wherever rotating parts need clean, controlled movement. This set contains 10 ball bearings in 5 x 9 x 3 mm format, giving model-building enthusiasts a compact replacement or workshop supply for mechanical assemblies that rely on accurate shaft support. The 5 mm inner diameter, 9 mm outer diameter and 3 mm width suit installations where space is limited and the fit has to match existing hubs, axles or transmission points. As metal rolling bearings, they are intended for positions where fixed bushings are not the right match and a dedicated bearing is required instead. The pack of 10 supports full maintenance jobs, partial rebuilds or keeping matching spares ready for future service work. Their small format also makes them relevant for several rotating points within the same model rather than a single repair location. On the workbench, these bearings suit careful replacement tasks in hobby models and accessories with compact running gear or drivetrain layouts. During servicing, the defined dimensions help when matching worn parts to the correct size, while the 10-piece quantity leaves room for repeated use across ongoing workshop projects. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 6x10x2.5, RC spare part, 10-pack
500904010€13.99
Small running parts make a clear difference in model engineering, and this set of 10 ball bearings brings a precise 6 x 10 x 2.5 mm format to repair, replacement and workshop stock. The open version without seal suits builds and maintenance jobs where the bearing layout itself is part of the required fit. Each bearing is sized with a 6 mm inner diameter, 10 mm outer diameter and 2.5 mm width, giving hobbyists a defined format for mechanical assemblies that rely on closely matched dimensions. The pack of 10 supports work across several mounting points instead of limiting a project to a single replacement. In RC and model applications, bearings like these are typically used where rotating parts need clean, consistent movement within a compact installation space. The metal bearing construction shown in the product presentation underlines the technical character of this spare-parts set. Whether the task is refreshing a used model, replacing worn running hardware or keeping core workshop supplies ready between builds, this bearing set fits naturally into the parts box. The compact size and multi-pack quantity also suit planned servicing where several identical bearings are needed within the same assembly. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 8x12x3.5, spare part, set of 10
500904015€13.99
Ball bearings are core running components in model mechanics, and this set provides 10 matching pieces in an 8 x 12 x 3.5 mm size for repair, maintenance and parts replacement. The compact metal format suits assemblies that rely on controlled rotation and a precise seat inside the surrounding mechanism. Each bearing uses an inner ring, outer ring and ball race construction to support rotating shafts while reducing direct sliding contact between parts. That makes this set a practical choice for hobby benches where wheel carriers, transmission points or axle-mounted components need fresh running hardware. The 10-piece quantity also helps when several positions in one model use the same size, or when spare bearings are kept ready for later service intervals. On a workbench, the set supports rebuilds, routine servicing and targeted replacement of worn bearings in model vehicles and related hobby mechanisms. The 14 Years age marking places it within the hobby and model-building range, where precise small parts belong alongside planned maintenance and careful installation. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 8x16x5, RC spare part, set of 10
500904017€13.99
Ball bearings are among the smallest parts in an RC build, yet they have a direct effect on how cleanly moving assemblies run. This set provides 10 metal ball bearings in 8x16x5 mm size, giving model-building enthusiasts a clearly defined spare part for service work, replacements and workshop stock. The 8 mm inner diameter, 16 mm outer diameter and 5 mm width make the format easy to match to an existing assembly when a worn bearing needs to be exchanged. The circular metal construction is suited to rotating mounting points where low-friction movement matters, and the quantity of 10 supports multiple replacement points within one model or across several hobby projects. The close-up product image shows a compact, silver-coloured miniature format with enclosed bearing faces, consistent with precision parts used in RC drivetrains and rolling assemblies. In regular workshop use, a pack like this fits naturally into rebuild sessions, routine maintenance and parts-box organisation. It can be kept ready for axle carriers, wheel mounts, transmission points or other compatible mechanical locations that require the exact 8x16x5 mm specification. Age marking: 14 years and up Warning! Not suitable for children under 14 years.
Ball bearings
CC-01 Ball Bearing Set, model accessory, 18pc
500904029€22.49
The CC-01 platform is known among RC enthusiasts for its mix of scale character and mechanical involvement, and this ball bearing set targets that layout with 18 bearings sized for the chassis. As a model accessory rather than a vehicle in its own right, it focuses on one clear task: replacing friction-heavy rotating points with shielded metal bearings that support cleaner, more efficient movement. Within an RC drivetrain, a ball bearing carries the shaft on rolling elements instead of a plain sleeve, which changes how the transmission, axles and wheel assemblies turn under load. On a CC-01 build or rebuild, that means the relevant mounting points can spin with less drag and a more consistent feel across the chassis. The mixed bearing sizes shown in the set reflect the different diameters used around the platform, so the assortment is aimed at the actual bearing seats rather than a generic hardware supply. For workshop routines, the 18-piece count keeps the conversion focused and complete for the intended locations. This set fits naturally into maintenance sessions, fresh chassis builds and running upgrades where smoother rotation and more precise mechanical support matter. Age marking: 14 Years. Warning! Not suitable for children under 14 years.
Ball bearings
CC-02 Chassis Ball Bearing Set, model accessory
500904063€27.99
The CC-02 chassis uses multiple rotating points across its transmission and axle layout, and this ball bearing set is built to replace those wear components with 22 precision-made metal bearings matched to that platform. The mixed sizes shown in the set support the different bearing seats used within the CC-02 chassis, giving model-building enthusiasts a focused upgrade for smoother mechanical operation. Instead of relying on plain bushings, the bearing design supports freer rotation at the points where shafts and driven parts turn inside the chassis. That can help the drivetrain run with less drag during regular use and gives maintenance work a more exact, component-based approach. The set combines 16 bearings of one size with 6 additional bearings in other sizes, reflecting the varied mounting positions found in the chassis layout. For rebuilds, servicing or a fresh parts refresh, that model-specific spread keeps the upgrade aligned with the actual hardware used in the vehicle. In workshop sessions, the set fits naturally into routine maintenance, from replacing worn running parts to preparing a chassis for cleaner, more efficient rotation. It also suits hobby benches where a CC-02 build is being refined with dedicated spare parts chosen for the platform rather than generic hardware.
Ball bearings
DT-01 Grasshopper Ball Bearing Set, RC spare part
500904025€12.29
This DT-01 Grasshopper 1/2 ball bearing set brings a focused upgrade to the running hardware of compatible RC models. The pack contains 10 metal bearings, giving model-building enthusiasts a dedicated spare-parts set for maintenance, replacement work or a planned chassis refresh. Ball bearings sit at the heart of rotating assemblies, where the inner and outer rings support cleaner movement than worn stock parts. In RC vehicle use, that matters at axle points, gearbox locations and other driven sections that rely on consistent rotation. The shielded metal design shown for this set suits hobby workshop use where precise fit and dependable rolling action are essential. As a model supply in the Models & Accessories category, this set is aimed at technical upkeep rather than decoration, making it a practical addition to parts storage for regular servicing. Whether the task is rebuilding a used chassis, replacing tired bearings after repeated runs or preparing compatible DT-01 and Grasshopper 1/2 models for smoother operation, this 10-piece set covers a core mechanical need. Age marking: 14 Years Warning! Not suitable for children under 14 years.
Ball bearings
DT03/DT02 Ball Bearing Set, RC spare parts
500904031€15.99
A compact bearing upgrade can change how an RC chassis feels on the bench and on the track. This DT03/DT02 Ball Bearing Set includes 14 shielded metal bearings made for the rotating assemblies of compatible buggy platforms, bringing a more precise, lower-friction running characteristic to key moving points. The set is intended for TAMIYA DT02 Super Fighter G and DT03 Neo Fighter Buggy. In these chassis, ball bearings take over tasks at points where shafts, axles or transmission parts need clean, consistent rotation. The shielded design helps keep the bearing mechanism enclosed while the metal construction matches the mechanical role of a hard-working spare part. With 14 bearings in the pack, the set is configured as a model-specific upgrade rather than a generic workshop assortment, which makes it a practical choice for repair work, scheduled maintenance or a fresh chassis build based on the named platforms. On a rebuild, the bearings support a tidier drivetrain feel and freer-running rotating parts. During regular use, they suit workshop stock for servicing a DT02 Super Fighter G or DT03 Neo Fighter Buggy after wear, cleaning or part replacement. Age 14+ Warning! Not suitable for children under 14 years.
Ball bearings
GF-01/WR-02/TL-01 Ball Bearing Set, RC accessory
500904026€26.49
A full ball bearing conversion is a classic step in RC model maintenance, and this GF-01/WR-02/TL-01 set brings together 24 matching bearings for those three chassis families in one technical parts pack. The compact metal bearings are made for rotating assemblies where clean, controlled movement matters during running and servicing. Each bearing uses an inner ring, outer ring and shielded side faces to support shafts and axles while reducing friction at the contact point. That mechanical change can help a compatible chassis turn more freely than with worn bushings or tired bearings, especially in areas that see repeated rotation. The set format also keeps the quantity clear for planned rebuild work, so workshop preparation stays focused on the actual chassis requirement rather than mixed loose spares. As a dedicated RC accessory, the bearings suit replacement after wear as well as careful upgrades during a fresh build or strip-down. On the bench, the set fits naturally into drivetrain service, axle maintenance and general chassis overhauls on GF-01, WR-02 and TL-01 models. The small, uniform format also makes the bearings useful to keep on hand for routine hobby maintenance when a smooth-running rotating assembly is the goal. Warning! Not suitable for children under 14 years.
Ball bearings
KoD Ball Bearing Set, model accessory, 14 pcs
500405916€21.99
The KoD Ball bearing Set brings 14 replacement bearings together in one technical maintenance pack for RC model work. Metal construction and black rubber seals give each bearing a defined role in rotating assemblies, where clean support and reduced friction matter for consistent running. The set image shows multiple sizes, with 8 larger bearings and 6 smaller bearings arranged as a mixed pack rather than a single-size refill. That layout suits models that use different bearing dimensions across hubs, axles or other mechanical mounting points. In workshop use, ball bearings support shafts and rotating parts while helping assemblies turn with less resistance than worn plain mounts. The rubber-sealed design adds a practical barrier around the bearing race, which is especially useful where dust and fine debris can work into moving parts during regular running sessions. As a spare parts accessory, the KoD Ball bearing Set fits naturally into routine servicing, rebuilds and replacement work on compatible model vehicles or mechanical model assemblies. The 14-piece count provides a ready stock for partial overhauls or for renewing several wear points in one session. Age marking: 14 Years.
Ball bearings
M-06/M-05 Chassis, ball bearing set, 18 pcs
500904059€31.99
Built around the M-06 and M-05 chassis platforms, this ball bearing set brings a focused drivetrain and running gear upgrade to compatible RC model builds. The set contains 18 metal bearings in 2 sizes, giving model-building enthusiasts the core parts needed for multiple bearing positions within the chassis and helping rotating assemblies run with less mechanical drag. The shielded bearing design supports cleaner movement at axles, shafts and other rotating points where plain bushings can create more resistance. That makes this set a practical choice for maintenance benches, rebuilds and performance-minded chassis preparation. The silver-coloured, precision-machined bearings are presented as dedicated model accessory parts rather than generic hardware, with the quantity and size mix aligned to the named M-06/M-05 application. In workshop use, the set fits naturally into a fresh chassis build, a worn-bearing replacement cycle or a running upgrade for an existing compatible model. Age marking: 14 Years. For hobby rooms focused on tuning, servicing and smoother mechanical operation, this bearing pack adds a concrete, chassis-specific component set. Warning! Not suitable for children under 14 years.
Ball bearings
MF-01X Ball Bearing Set, model accessory, 24
500904056€31.99
The MF-01X Ball bearing set brings a focused drivetrain upgrade to compatible model builds with 24 metal bearings arranged for key rotating positions. In an RC workshop setting, these compact precision parts support freer movement wherever axles, shafts or gear-driven assemblies turn under load. Instead of relying on plain bushings, ball bearings introduce rolling contact inside the bearing race, which helps mechanical assemblies run with less drag during driving sessions. The set image shows a mix of bearing sizes, indicating coverage for different mounting points within an MF-01X-based layout. That makes the pack useful for maintenance, replacement work or a planned tuning step during a rebuild. The metallic construction suits repeated installation into technical assemblies where accurate fit and smooth rotation matter. On the bench, the set fits naturally into service work on wheel hubs, transmission points and other moving sections that benefit from lower resistance. During a fresh assembly or a later overhaul, the 24-piece bearing pack adds a concrete hardware upgrade for hobbyists working on compatible MF-01X model platforms. Warning! Not suitable for children under 14 years.
Ball bearings
TA-01/01B Ball Bearing Set, RC spare parts
500904023€26.49
Rotating assemblies define how an RC chassis feels on the bench and on the track, and this TA-01/01B ball bearing set brings that focus to the parts that carry shafts, axles and driven components. The pack contains 22 ball bearings sized for TA-01 and 01B applications, giving model builders a dedicated replacement and upgrade set for these platforms. Shielded metal bearings are used where smoother rolling action and reduced drag matter in the drivetrain and wheel assemblies. Instead of sourcing individual pieces one by one, this set groups the required quantity into a single maintenance pack that suits rebuilds, scheduled servicing and older chassis refreshes. The mixed sizes shown in the set support different mounting points within the vehicle, which is useful when several rotating sections need attention at the same time. As a workshop spare, the set also helps keep a compatible stock of bearings ready for future repairs. The bearing pack fits naturally into bench work such as replacing worn running hardware, updating a stored chassis or preparing a model for its next driving session. Age marking: 14 Years. For RC hobbyists working on TA-01 or 01B models, it is a compact way to keep essential rolling components on hand. Warning! Not suitable for children under 14 years.
Ball bearings
TT-02 On Road Cha. Ball Bearing Set, 16 pcs
500904055€21.99
The TT-02 On Road Cha. Ball bearing set brings a core running upgrade to the TT-02 On Road chassis with 16 metal bearings arranged for key rotating points. Each bearing is a compact circular component designed to sit where axles or driven parts turn, replacing plain bushings or worn bearings with a lower-friction solution that suits regular chassis maintenance. Within an on-road setup, ball bearings matter most where rolling resistance and drivetrain drag can affect how freely the chassis moves. This 16-piece set gives model-building enthusiasts a dedicated pack for service work on the TT-02 platform, with matching silver-grey bearing units shown as uniform metal parts. The format suits rebuilds after heavy use, planned maintenance between running sessions, or a fresh chassis assembly where smoother rotation is part of the target setup. As a chassis-specific accessory, the set focuses on mechanical function rather than decoration, adding a precise hardware update that belongs directly in the running gear. On the bench, the bearings fit naturally into a TT-02 On Road project where worn rotating parts need replacement or a new build calls for the correct quantity in one pack. The set also works as a practical spare for hobby storage, ready for the next drivetrain refresh or wheel assembly service. Warning! Not suitable for children under 14 years.
Ball bearings
TT-02B/TT-01E Ball Bearing Set, RC spare part
500904054€28.49
This ball bearing set is made for TT-02B, TT-01E and TT-01 model platforms and brings a focused workshop upgrade to key rotating assemblies. With 16 metal bearings in 2 specified sizes, it supports maintenance, replacement work and drivetrain refreshes where clean, precise running matters. The set includes 12 bearings in 5 x 11 mm and 4 bearings in 8 x 12 mm, giving a defined size mix for the chassis families named in the data. The loose bearing format suits planned servicing as well as parts-bin restocking for regular rebuild work. Shielded construction helps the bearings run with low friction while supporting smooth rotation in hubs, shafts or gearbox-related mounting points where the chassis layout requires them. For model-building enthusiasts, this kind of matched bearing set is a practical way to keep a favourite platform mechanically tidy without relying on mixed leftover parts. On the workbench, the 2-size combination helps streamline maintenance on compatible TT-02B, TT-01E and TT-01 vehicles. During rebuilds or running repairs, the set provides the specified bearing count in one pack for direct replacement of worn or missing units. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing Set BT-01/MB-01, model spare part
500904065€19.99
This 18-piece ball bearing set is made for BT-01 and MB-01 models and brings a more precise running surface to the rotating assemblies inside the chassis. Metal bearings support axles and shafts where clean, consistent movement matters, making the set a practical choice for maintenance, repair or tuning work. The assortment shown includes multiple bearing sizes, allowing the set to cover different mounting points rather than a single location. Shielded bearings help keep the running surfaces enclosed, while the ring-shaped and smaller open-centre formats shown in the set extend its use across varied mechanical positions. In RC model drivetrains, bearings are used where wheels, gears or transmission parts rotate under load, so replacing worn bushings or tired bearings can restore smoother mechanical action. The dedicated BT-01 and MB-01 fit keeps the selection focused on compatible chassis instead of a generic mixed hardware pack. On the workbench, the set supports routine servicing before the next run as well as targeted replacement during a rebuild. It also suits enthusiasts refining a fresh chassis setup, where low-friction rotating points contribute to cleaner rolling and drivetrain response. Warning! Not suitable for children under 14 years.
Ball bearings
Truck 3-axle Ball Bearing Set, model accessory
500904028€32.49
Truck 3-axle Ball bearing set 30 brings a focused upgrade path to model workshop maintenance with a pack of matching metal bearings made for 3-axle truck applications. The uniform construction supports clean installation across repeated mounting points, where consistent dimensions matter for rolling parts and mechanical assemblies. In a model drivetrain or axle setup, ball bearings take over the rotating contact point between fixed and moving parts. That mechanical role can matter at wheel hubs, axle supports or similar bearing seats, where smoother rotation and reduced drag help assemblies run with a more controlled feel. The set format with 30 identical pieces is useful when several positions need replacement at once, or when a rebuild calls for a complete refresh rather than changing single worn parts. The compact metal components also fit naturally into the regular service cycle of hobby models, where small running parts often decide how cleanly an assembly turns. On the workbench, this set supports planned maintenance, repair jobs and parts stocking for future service intervals. Age marking: 14 Years. The bearing pack also suits enthusiasts who keep matching spare parts on hand for repeated axle work on truck model assemblies. Warning! Not suitable for children under 14 years.
Ball bearings
3A Scania MAN Ball Bearing Set, model accessory
500904053€35.99
Ball bearings are a small component with a big effect in model mechanics, and this 3A Scania MAN set brings together 32 matching bearings for focused service work on the designated truck platform. The compact metal parts are made for rotating assemblies where clean, precise movement matters. Each bearing uses an inner ring, outer ring and rolling elements to reduce friction between moving parts, which can support smoother running at axles, shafts and comparable mounting points in a model drivetrain or chassis assembly. As a dedicated accessory rather than a general hardware mix, the set is aligned with the 3A Scania MAN application named in the data. That makes it useful for planned maintenance, replacement of worn bearings or a rebuild where the correct quantity is needed in one pack. The grouped 32-piece count also helps keep workshop preparation straightforward when several mounting points are serviced in the same session. On the bench, this kind of component belongs to the detailed side of the hobby: opening assemblies, fitting fresh bearings and restoring free movement to mechanical sections that depend on accurate rotation. The 14 years marking in the data places the set in the model-building field, where technical parts and platform-specific accessories are chosen with the same care as the main vehicle itself. Warning! Not suitable for children under 14 years.
Ball bearings
Tipper Truck 8x4 Ball Bearing Set, model spare
500904064€58.99
Built for the Tipper Truck 8x4, this ball bearing set adds a focused mechanical upgrade to a model where many rotating points work under load. The set contains 34 shielded bearings, with 32 in one size and 2 smaller bearings for positions that need a different diameter within the chassis layout. Instead of plain sliding contact, each bearing uses rolling elements to support shafts and other moving parts with lower friction. That can help wheel hubs, transmission points and axle-mounted components turn with a cleaner mechanical feel during operation. The steel construction suits workshop fitting where precise seating matters, and the mixed size count allows the set to match more than one bearing location within the same vehicle. As a dedicated spare and tuning part, it fits naturally into maintenance work, rebuilds or a fresh model setup where the running gear is being equipped component by component. On the bench, the set supports systematic installation across the model's rotating assemblies rather than a one-point repair. In regular use, the bearing layout suits hobbyists who want the Tipper Truck 8x4 to run with more refined mechanical movement at the parts that matter most.
Ball bearings
Tow Truck 8x4 Ball Bearing Set, model accessory
500904062€59.99
The Tow Truck 8x4 Ball Bearing Set brings a focused workshop upgrade to the mechanical core of the model with 36 compact metal bearings made for replacement, servicing, or a full running-gear refresh. The shielded radial design points to use in rotating assemblies where clean movement and precise seating matter during maintenance work. Within a model build, ball bearings sit at the points where motion is transferred through axles, wheel mounts, or gear-driven sections, and this set provides the quantity needed for a broader overhaul rather than a single swap. The uniform metal construction and consistent bearing format suit hobby benches where worn parts are exchanged methodically and matched components matter. As a dedicated set for the Tow Truck 8x4, it supports repair planning with a clearly defined component pack instead of mixed loose replacements. On the bench, the set fits routine servicing after long running sessions, a rebuild of an older model, or the careful preparation of a fresh mechanical setup. The 14 Years age marking is stated in the product data.
Ball bearings
Truck 2-axle Ball Bearing Set, model accessory
500904027€25.99
Truck layouts with 2 axles rely on many small rotating points, and this ball bearing set addresses that need with 24 individual bearings for model maintenance, repair work, or a new mechanical setup. The compact metal parts are shown as shielded radial bearings, a format widely used where axles, shafts, and hubs need guided rotation with reduced drag. The set suits model truck assemblies in which several moving points benefit from matching bearing hardware rather than plain bushings. Each bearing uses an inner ring and an outer ring around the ball track, supporting controlled movement in compact spaces inside the running gear. That makes the set relevant for wheel mounts, axle points, gear-supported sections, and other rotating assemblies where clean mechanical action matters. As a dedicated model accessory, it fits naturally into workshop stock for servicing wear parts or preparing a drivetrain with consistent components. In practice, the 24-piece count gives useful scope for equipping a 2-axle truck model across several bearing positions or keeping spares ready for later maintenance. The age marking is 14 Years. On the bench, the small metal bearings bring a precise, technical character to rebuilds and replacement jobs in hobby-grade vehicle projects. Warning! Not suitable for children under 14 years.
Ball bearings
US-Trailer/DF-02 Ball Bearing Set, model spare part
500904030€9.79
Ball bearings are a small upgrade with a direct mechanical effect, and this US-Trailer/DF-02 set brings 8 matching units together for maintenance, replacement or a fresh model build. Each bearing provides a defined rolling interface between inner and outer ring, so shafts or mounted parts can turn with less sliding resistance than a plain bushing setup. The set is listed for the US-Trailer/DF-02 and belongs to the model supplies range, making it a focused spare part for hobby work rather than a general accessory. The metal bearings shown in the set use a compact radial format with a central bore and shielded sides. That construction helps keep rotation consistent at the installed point while supporting cleaner running in assemblies that depend on accurate concentric movement. In practical workshop use, bearings like these are typically fitted at wheel, axle or drivetrain positions where free rotation matters to the overall mechanical response. With the age marking of 14 Years, the set sits in the hobby segment and suits detailed service tasks on compatible models. It works well for routine upkeep, for replacing worn running parts, or for preparing a build where smooth mechanical action is part of the goal. Warning! Not suitable for children under 14 years.
Ball bearings
Ball bearing 6x12x4, spare part, 10-piece set
500904011soon available again
Small drivetrain parts make a clear difference in how a model runs, and this set brings that focus to a core workshop essential. The pack contains 10 ball bearings in 6 x 12 x 4 mm size, giving model builders a consistent supply for maintenance, repair work and parts replacement in compatible assemblies. The compact format suits mechanisms where accurate fit matters, especially around rotating shafts and axle points. Ball bearings are used to support moving parts with reduced friction, helping compatible model components turn more freely than a plain bushing setup. With 10 matching pieces in one pack, the set also suits bench stock for regular servicing, rebuild projects or replacing several worn positions at once. The metal construction keeps the emphasis on the functional component rather than cosmetic detail, which is exactly what matters in a technical spare part. In the workshop, these bearings fit naturally into routine jobs such as refreshing running gear, restoring smoother movement after wear, or preparing compatible models for the next session. The 14 Years age marking is stated in the product data, and the set belongs to the Models & Accessories and Models Supplies range. Warning! Not suitable for children under 14 years.
Ball bearings
M-03/FF-02 Ball Bearing Set, model accessory
500904024soon available again
This M-03/FF-02 ball bearing set brings a focused drivetrain upgrade to compatible model chassis with 14 metal bearings made for precise rotating points. The compact bearing format suits hobby maintenance benches and rebuild projects where cleaner running and reduced mechanical resistance are the goal. As a dedicated set for M-03 and FF-02 applications, it avoids the trial-and-error of mixing loose workshop stock across different sizes. The shielded bearing design shown for the set helps keep each unit suited to repeated installation in model assemblies with spinning shafts and hubs. In running gear, ball bearings support smoother rotation than plain bushings by replacing sliding contact with rolling elements inside the bearing race. That mechanical change matters most at wheels, axles and other loaded moving points where drag can affect free movement and overall running feel. The set fits naturally into service work, rebuilds and planned chassis upgrades for 14Y+ model enthusiasts. Whether a compatible model is being refreshed after regular driving or assembled with efficiency-minded running parts from the start, these 14 bearings provide a direct route to a more precise rotating setup on the intended M-03/FF-02 platform. Warning! Not suitable for children under 14 years.
Ball bearings
1:10 Ball Bearing
500405803only available from customer service
Carson 500405803 - 1:10 ball bearing is a spare part for 1:10 scale models and appeals specifically to model building enthusiasts who rely on precisely fitting components. The bearing serves as a direct replacement for corresponding applications in the chassis and facilitates the restoration or maintenance of your models. A perfect fit.
Ball bearings
CV-10 Ball bearing set (18)
500105149only available from customer service
Carson ball bearing set CV-10 (500105149) with 15 ball bearings is the compact replacement set for model builders who value components that are true to the original. The CV-10 set contains exactly 15 bearings for the targeted maintenance and repair of your models and appeals to enthusiasts who value precision and interchangeability.
Ball bearings
FY10 Destroyer Ball bearing, 8pcs
500405280only available from customer service
Carson 500405280 FY10 Destroyer ball bearing kit includes eight ball bearings, especially for the 1:10 DESTROYER/DFFY. For model builders, this means noticeably quieter axles, increased durability and uncomplicated installation - ideal for targeted replacement or for optimizing the performance of your model. A must-have for targeted maintenance. Warning! Not suitable for children under 14 years.
Ball bearings
X-Crawlee pro Ball Bearing (8 pcs.)
500405618only available from customer service
The Carson X-Crawlee pro ball bearing set 500405618 contains eight ball bearings and is expressly designated as a spare part for the X-Crawlee pro. Model building enthusiasts appreciate this true-to-original package, which enables reliable movement functions and keeps your model ready for use with its precisely fitting shape and robust design.