RC receivers and accessories
Remote-controlled systems
Receiver Reflex Pro 3 Nano 2.4G
500501538€28.49
Article number: 500501538 Product: Receiver Reflex Pro 3 Nano 2.4G When there's not enough space in your model again! The small CARSON 3-channel NANO receiver for all Reflex 2.4G PRO 3 and Reflex Stick 2 and Multi PRO (Not for 500501004) RC units is the ideal choice when there's not enough space in your model vehicle or boat for building it into the RC unit. Suitable for CARSON Reflex remote controls: 500500052, 500500053, 500500090, 500500091, 500500054, 500500055, 500500056, 500500517, 500501006, 500501003 Receiver Reflex Pro 3 Nano 2.4G Warning! Not suitable for children under 14 years.
Remote-controlled systems
Reflex 6/14Ch Switch 2 (2x2,5A)
500503060€38.99
Article number: 500503060 Product: Reflex 6/14-channel switch 2 (2x 2.5 A) The switch modules connect directly to your RC receiver and can be controlled via a button, switch or joystick. The position of the switch/button (up and down) and the duration (long and short) is detected. With the 2-way module, only the position is detected. When using buttons and switches, always ensure that they have a neutral position – a so-called 3-position switch/button (on/off/on). Each switch output features a memory function: This means that it stays activated until the switch/button is moved back to the neutral position. The switch module features two separate NPN outputs. Both outputs have a 200 mm blue cable, which must be connected to the negative pole of the load. Each switch output can switch a current of up to 2.5 A. The maximum permitted supply voltage is 16 V/DC. The module supplies itself with power via the servo cable. The black negative cable can be directly connected to the battery or a distribution terminal (item no. 500503062, available separately). At high loads, the black cable must be connected to the distribution terminal or the drive battery in order to prevent damage to the receiver. For easy wiring we recommend: (It is recommended to tin the cable ends.) 500503062 CARSON Reflex switch 2/4 power distributor Reflex 6/14Ch Switch 2 (2x2,5A) Warning! Not suitable for children under 14 years.
Remote-controlled systems
Reflex 6/14Ch Switch 4 (4x2,5A)
500503061€43.99
Article number: 500503061 Product: Reflex 6/14Ch Switch 4 (4x2,5A) The switch modules connect directly to your RC receiver and can be controlled via a button, switch or joystick. The position of the switch/button (up and down) and the duration (long and short) is detected. When using buttons and switches, always ensure that they have a neutral position – a so-called 3-position switch/button (on/off/on). Each switch output features a memory function: This means that it stays activated until the switch/button is moved back to the neutral position. The switch module features four separate NPN outputs. All of them have a 200 mm blue cable, which must be connected to the negative pole of the load. Each switch output can switch a current of up to 2.5 A. The maximum permitted supply voltage is 16 V/DC. The module supplies itself with power via the servo cable. The black negative cable can be directly connected to the battery or a distribution terminal (item no. 500503062, available separately). At high loads, the black cable must be connected to the distribution terminal or the drive battery in order to prevent damage to the receiver. For easy wiring we recommend: (It is recommended to tin the cable ends.) 500503062 CARSON Reflex switch 2/4 power distributor Reflex 6/14Ch Switch 4 (4x2,5A) Warning! Not suitable for children under 14 years.
Remote-controlled systems
Reflex Micro-ESC 10A/BEC
500503064€60.99
Article number: 500503064 Product: Reflex Micro-ESC 10A/BEC The Reflex-Micro ESC is suitable for model making applications where very little amount of space is available. It is short-circuit-proof, has temperature protection and a fail-safe system for engine shutdown.
Remote-controlled systems
Reflex Switch 2/4 Power allocator
500503062€32.49
Article number: 500503062 Product: Reflex Switch 2/4 Power allocator The distribution terminal allows for easy connection (almost solderless) of additional components to the drive battery, such as a switch module. The battery cable does not need to be disconnected. The circuit board features two spring-loaded terminals. A red 5-pin terminal is connected to the positive pole via a resettable fuse, and a black 3-pin terminal is connected directly to the negative pole. In the event of a short circuit, the fuse quickly provides a high impedance and interrupts the flow of current almost entirely. This state is maintained for the duration of the short circuit. The fuse then reverts to its initial state shortly after the short circuit has been eliminated. Due to the time delay, higher currents can also be realized for a short time. (It is recommended to tin the cable ends.) Compatible with CARSON Reflex Switch 2/4 500503060 Reflex 6/14-channel switch 2 (2x 2.5 A) 500503061 Reflex 6/14-channel switch 4 (4x 2.5A) Package contents: Power distributor (ready to use), instructions. Warning! Not suitable for children under 14 years.
Remote-controlled systems
Micro Fail Safe, waterproof
500906128€21.49
Article number: 500906128 Product: Micro-Fail Safe waterproof With waterproof housing. In RC cars and boat models: activates the pre-programmed servo position in the event of a transmitter failure or out-of-range condition. With low voltage detection (can be disabled). Warning! Not suitable for children under 14 years.
- 25 %
Remote-controlled systems
Reflex 6/14Ch Switch 4 (15Prog.)
500503063€51.99
Article number: 500503063 Product: Reflex 6/14Ch Switch 4 (15Prog.) The switch modules connect directly to your RC receiver and can be controlled via a button, switch or joystick. The switch module features four separate NPN outputs. All of them have a 200 mm blue cable, which must be connected to the negative pole of the load. Each switch output can switch a current of up to 2.5 A. The maximum permitted supply voltage is 16 V/DC. The module supplies itself with power via the servo cable. The black negative cable can be directly connected to the battery or a distribution terminal (item no. 500503062, available separately). At high loads, the black cable must be connected to the distribution terminal or the drive battery in order to prevent damage to the receiver. For easy wiring we recommend: (It is recommended to tin the cable ends.) 500503062 CARSON Reflex switch 2/4 power distributor