Electronics

1:14 12V LED-PCB Taillight, model accessory

€57.99

A 7-section taillight layout is a defining detail on many scale truck builds, and this 1:14 LED-PCB set brings that look into a compact 12V lighting accessory. The pair is designed as matching left and right boards, each marked L or R, creating a clear basis for symmetrical rear installation on a model vehicle. Each green PCB carries surface-mounted electronic components and preattached wiring, giving the lighting setup a tidy technical character once installed behind the rear light positions. The 5 attached leads on each board are colour coded in blue, black, yellow, red and white, which helps keep the wiring paths distinct during integration into an existing electrical layout. Mounting holes near the lower corners support fixed placement inside the body or light housing where a secure fit is needed. In workshop-style upgrade projects, the mirrored board design suits truck or trailer rear ends that need matching light units on both sides. The 12V specification makes the set suitable for model electrical systems built around that voltage, while the compact board format leaves room for careful routing and clean finishing in detailed 1:14 installations.

Electronics

1:14 Angle Eyes Hella, model lights, white

€52.99

Auxiliary lamps are a small detail with a big effect on a scale truck, and this 1:14 Angle Eyes Hella set brings that workshop-style finishing touch in a compact 2-piece format. The round lamps combine a white light look with chrome-look housings and separate mounting brackets, creating a front-end accent that fits naturally into detailed vehicle builds. The set is specified for 7.2 V and 12 V systems, with long black cables attached to each lamp for wired installation. That layout supports clean routing through the body or chassis area and leaves room for custom placement where the lighting concept of the model needs it. The round shape, reflective finish and bracketed base suit classic auxiliary-light positions such as bumpers, roof sections or other scale mounting points supported by the build. As a matched pair, the lamps help maintain a consistent left and right layout instead of mixing different light styles across the vehicle. In a workshop build, show truck project or detailed shelf model, these lamps add a recognisable Hella-style visual cue without changing the overall character of the vehicle. The 1:14 scale focus keeps the proportions aligned with larger truck models, while the wired format gives hobbyists scope to integrate lighting as part of a more individual setup.

Electronics

1:14 Angle Eyes LED PCB, model accessory

€34.49

Angle Eyes lighting is a familiar styling cue in full-size vehicle culture, and this 1:14 LED set translates that look into a compact model-building format. The white SMD LED PCB is designed for 7.2 V and 12 V systems and brings a defined illuminated ring effect to compatible scale vehicle front ends. The set is built around compact light modules, fine connection cables and mounting parts shown in the included contents. That layout supports installation in tight body sections where larger lighting components would take up too much space. In a 1:14 build, the small-format PCB helps add lighting detail without overwhelming the proportions of the model. The white LED output suits headlamp styling with a clear, technical look, while the wiring layout supports connection into an existing compatible electrical setup. Mounted behind the front light area, the LEDs add a more defined visual signature when the model is on display, on a shelf, or integrated into a running vehicle project. Age marking: 14 years and up. A compatible model and a suitable power connection are required separately.

Electronics

1:14 Angle Eyes, LED set, blue SMD PCB

€34.49

Blue Angle Eyes lighting brings a sharper custom look to 1:14 scale vehicle builds, with SMD LED PCB technology designed for operation on 7.2 V or 12 V systems. The set is aimed at model-building enthusiasts who want to add a clear lighting accent to a compatible project and extend the visual detail of the front end beyond the standard body finish. The compact electronic layout suits installations where space is limited around the body shell or light area, and the wired modules support placement within a scale build without dominating the visible structure. Blue illumination creates a defined styling effect that stands out in workshop displays, shelf presentation, or running sessions under lower ambient light. As a dedicated accessory from the models and accessories range, the set fits naturally into hobby projects that combine body detailing, electronics, and scale-focused finishing work. Age 14 Years. In a truck or other 1:14 model project, the lighting can be used to refine a custom road setup, add a more technical visual signature, or support a display-focused build with extra electronic detail. The set also works well for enthusiasts planning a fresh rebuild or updating an existing compatible model with a new lighting element.

Electronics

1:14 Angle Eyes, model light set, 7.2/12V

€52.99

Angle Eyes lighting brings a sharper front-end signature to 1:14 model builds, with 2 round lamps designed for 7.2 V and 12 V operation. The white light effect suits scale truck projects that need a clear visual accent at the front, while the Hella-style form gives the setup a recognisable workshop and road-going look. Each lamp is connected by cable, which supports custom installation on bumpers, roof bars or other mounting points where extra lighting detail is wanted. The round housings keep the appearance consistent across both sides of the model, and the 2-piece format helps create a balanced layout rather than a single offset light source. On display shelves, in workshop scenes or during driving sessions, the lighting set adds a more technical finish to the bodywork without changing the core character of the build. The set suits hobby projects for ages 14 years and up and works well where scale detailing matters as much as driving action. Whether fitted to a road truck, a show build or a custom conversion, these lamps add a compact lighting element that strengthens the model's presence through shape, wiring and light effect.

Electronics

1:14 Angle Eyes, model lights, blue 7.2/12V

€52.99

Blue Angle Eyes bring a striking Hella-style lighting accent to 1:14 scale model builds, combining a compact round lamp shape with 7.2/12V operation for compatible electrical setups. The 2-light configuration creates a matched front-end look that suits detailed truck and vehicle customisation. Each lamp is shown with its own cable, giving the set the core hardware needed for integration into a model's lighting layout. The round housings keep the visual effect focused and clean, while the blue light colour adds a tuning-inspired detail that stands out in display settings and scale scenes. As a model accessory rather than a complete vehicle, this set is aimed at hobby work where small visual changes shape the finished character of the build. Batteries are not included. Mounted on a compatible 1:14 project, the pair can frame the front section with a more technical, customised appearance. The set also suits workshop-style rebuilds, replacement work on existing models, or fresh scale projects where lighting details are part of the overall concept.

Electronics

1:14 Angle Eyes, model lights, blue Hella

€52.99

Blue Angle Eyes bring a distinctive Hella-style lighting look to 1:14 model vehicles, combining round lamp bodies, chrome-look housings and blue accents in a compact 2-piece set. Designed for 7.2 V and 12 V systems, the wired layout supports installation on compatible builds where added front lighting is part of the visual setup. Each lamp is fitted with a mounting bracket and attached cable, giving the set the hardware needed for fixed placement on the model. The round format suits classic auxiliary-light styling, while the reflective housing adds a crisp technical finish that stands out on truck fronts, bumpers or roof bars where scale detailing matters. With 2 matching lamps in the set, the lighting arrangement stays visually balanced across the vehicle. On workshop-style custom builds, the pair adds a clear styling accent before the model heads onto the shelf or into driving sessions. On detailed road trucks and show builds, the blue Angle Eyes effect works as a focused visual upgrade that strengthens the scale character of the finished vehicle.

Electronics

1:14 Arocs Headlight, LED PCB, model accessory

€70.99

The Mercedes-Benz Arocs is known on full-size roads and construction routes for its strong, purposeful front-end design, and that character carries neatly into this 1:14 lighting upgrade. The 1:14 7.2 V LED-PCB Arocs Headlight set adds a model-specific light arrangement with 2 mirrored electronic modules shaped for the left and right sides. Each module uses a compact PCB with visible mounting points, integrated light positions and attached wiring, creating a structured solution for fitting illumination into the front section of a compatible Arocs model. In addition to the main board-mounted LEDs, each side includes a separate wired LED element, expanding the lighting layout beyond a single light point. The mirrored construction helps keep the installation aligned with the vehicle's front geometry rather than relying on a universal board shape. The 7.2 V specification matches common model truck electrical setups and gives hobby builders a clear voltage reference for planning the installation. On a workshop bench, the paired boards suit careful detailing work around the cab front and headlight area. Once fitted, the left and right arrangement supports a more complete scale appearance for display, diorama scenes or running sessions with a compatible 1:14 truck model.

Electronics

1:14 Arocs Tip LED-PCB Taillight, model accessory

€40.99

The Mercedes-Benz Arocs is a familiar sight in modern construction transport, and this 1:14 LED-PCB taillight set brings that working-truck character into a scale model with functional rear lighting. Designed as an Arocs Tip taillight accessory, the set includes 2 PCB units arranged as a left and right pair for a balanced rear-end layout. Each board works within an operating voltage range of 7.2 V to 12 V, which suits compatible model truck electrical systems used in hobby builds and upgrades. The lighting functions cover indicator left-right, driving light, brake light and reversing light, so the rear section can reflect several typical road-going signals through dedicated light points. The black carrier plates provide a compact base for the light elements, while the attached wiring looms are already fixed to each unit for connection into the model's electronics. Age 14 Years. Installed on a 1:14 tipper truck, the pair adds technical detail that stands out both on the workbench and during driving sessions. The mirrored arrangement suits rear body mounting on opposite sides, helping the finished model present a more complete truck look in motion and at rest.

Electronics

1:14 Flashing Light Set MB Arocs Accessory

€119.99

Built around the MB Arocs truck theme, this 1:14 flashing light set adds 2 beacon units that bring a recognisable working-vehicle accent to a scale build. The compact accessory format keeps the focus on a specific visual detail while strengthening the character of a model based on the Arocs subject. As a model accessory in the Models & Accessories and Models Supplies segment, the set is aimed at hobby builds where scale consistency matters. The 1:14 designation keeps the proportions aligned with matching truck projects, and the 2-light configuration gives the roof area or chosen mounting point a balanced appearance. Because the product data names the set specifically for MB Arocs, it fits naturally into truck-focused display scenes, workshop dioramas, and construction-themed layouts where the vehicle identity is part of the appeal. On the workbench, the set supports detail-focused finishing of a truck model with a clearly defined add-on rather than a broad rebuild. In display use, the flashing light format helps the model read more like a service or site vehicle, giving the finished build a stronger presence in shelf scenes and scale environments.

Electronics

1:14 LED Flashing Light, accessory, orange

€58.99

A rotating beacon is one of the details that gives a 1:14 scale working vehicle its finished road-going character, and this orange LED Flashing Light brings that look into a compact accessory format. The light unit is designed for 1:14 models and combines a swivelling effect with programmable operation, making it a strong visual addition on truck cabs, municipal builds or service conversions. The programming options go beyond a single light pattern. Programs 1 to 6 cover rotation to the left or right at 40 ms, 70 ms and 200 ms, while programs 7 to 13 provide different flash modes. The polarity is defined in the leaflet with orange as positive and black as negative, giving a clear basis for installation. The mounting diagram specifies a 4.5 mm hole, and the included fitting parts are shown compensating for roof pitch so the beacon can be aligned on sloped roof sections. For operation above 9.6 V, the leaflet states that a resistor must be soldered into the positive cable. On a scale truck, recovery vehicle or site support build, the beacon adds a functional light signature that changes the whole roofline once fitted. Age 14 years+ is stated in the product data, making this accessory suitable for hobby-focused model setups and detailed custom projects.

Electronics

1:14 LED Flashing Light, model accessory

€53.99

This 1:14 LED flashing light set brings a compact lighting detail to compatible scale model projects with an orange upright design and wired connection parts. The assembly combines a small plug element with metal contact pins and attached leads, giving model builders a clear electrical component for installation into a larger vehicle setup. The included parts are arranged as a dedicated accessory for fitting, replacement or restoration work rather than as a standalone model. A yellow sprue frame holds the molded upright components, while the separate connector section provides the contact point for integration into the existing electronics of a compatible 1:14 build. The orange warning-light style makes the fitted result stand out clearly on service, utility or transport-themed model scenes where visible signal details shape the overall look. On the workbench, this accessory suits projects that need a defined upright beacon element or a fresh replacement for worn lighting parts. In a finished scale vehicle, the compact format supports neat installation without overwhelming the proportions of a 1:14 model. Age 14 Years.

Electronics

1:14 LED-PCB MAN Headlight, model accessory

€70.99

Truck lighting is one of the details that gives a 1:14 scale build its finished road-going character, and this 7.2 V LED-PCB MAN Headlight set focuses that effect on the front end. The set consists of 2 mirrored circuit boards with mounted LEDs, long twisted wire harnesses and separate outer lamp leads, forming a matched left and right arrangement for compatible MAN model projects. The PCB layout carries several light components in different sizes, with copper traces and pre-mounted electronics that concentrate the headlight functions on compact boards. The wired design supports installation within a model body while keeping the light points positioned at the front where the headlight units belong. As an accessory in the Models & Accessories range, it fits naturally into detail work, repairs or lighting upgrades where electronic components are part of the visible build substance. In a workshop setting, the paired boards suit a truck build that needs a defined front lighting layout rather than a generic light source. On a finished shelf model or a running RC truck, the left-right board set and separate lamp leads help create a more complete MAN front-end appearance.

Electronics

1:14 LED-PCB Taillight, model accessory, 7.2V

€57.99

Rear lighting is one of the details that gives a scale truck build its finished road-going character, and this 1:14 LED-PCB taillight brings that function into a compact electronic module. The board is specified for 7.2V systems and uses a 6-section taillight layout that suits model projects where the rear end needs a defined light signature rather than a plain single-lamp look. The set shown in the product data consists of 2 green printed circuit boards, each fitted with attached multicolour cables for connection work inside the model. Visible solder pads and printed traces point to a purpose-built lighting component rather than a decorative shell part, making it relevant for repair benches, replacement jobs and detailed custom builds. The rectangular PCB format with mounting holes near the ends supports practical installation on compatible model applications where a fixed rear light board is needed. In a workshop context, this kind of part fits ongoing maintenance just as well as a fresh scale project. It can be used when an existing rear light module needs replacement or when a 1:14 vehicle is being equipped with a more defined taillight arrangement based on a 7.2V electrical setup.

Electronics

1:14 Light Case Clear, model accessory, universal

€26.49

Lighting details shape the character of a scale vehicle, and this 1:14 Light Case Clear set adds that crisp lamp finish with 2 transparent lens units in a universal format. The clear design suits model-building enthusiasts who want to refine a body shell, replace worn light parts or prepare a custom lighting layout on a 1:14 project. The set is intended for models and accessories work rather than as a complete vehicle system, making it a practical choice for workshop stock, rebuilds and visual upgrades. The universal specification supports use across different 1:14 applications where the chosen build calls for clear lamp covers. In body conversion work, transparent light cases help preserve the defined shape of the lamp area while leaving the final installation concept open to the builder. That makes the set useful both for fresh custom projects and for restoring scale details on an existing model. On a truck build, a service vehicle conversion or another 1:14 scale scene, the 2 matching light cases create a consistent look across the front or rear lamp positions. The compact accessory format fits naturally into hobby bench routines where replacement parts, finishing details and scale accuracy all matter.

Electronics

1:14 MAN Taillight, LED PCB, model accessory

€35.99

Rear lighting is one of the details that gives a scale truck its finished road-going character, and this 1:14 MAN taillight set brings that detail into the build with a 7.2 V LED-PCB layout. The set is designed as a dedicated model accessory for 1:14 applications and focuses on the rear section where lighting shape and placement matter most. Each taillight unit uses a narrow printed circuit board format with pre-attached wires for electrical connection inside the model. The paired board design suits left and right installation, while visible mounting holes support secure positioning in the rear body area. Contact points and compact board dimensions make the set suitable for integration where space is limited and clean routing matters. As a replacement part or upgrade component, the taillight boards add a more complete technical finish to truck projects based on a MAN subject. The set fits naturally into workshop tasks such as restoring rear lighting, refining a scale build or replacing worn electrical parts in an existing 1:14 truck. In display use, the taillight layout strengthens the realistic rear view; in running use, it completes the model with the lighting detail expected on a road truck build.

Electronics

1:14 MB Headlight, LED PCB, model accessory

€70.99

A 1:14 scale model gains a more defined front end with the MB Headlight LED-PCB set, built around 2 mirrored circuit board modules for 7.2 V lighting. The paired layout, compact green boards and attached LED elements give hobby projects a dedicated electronic headlight solution rather than a cosmetic body detail. Each side uses its own PCB module, creating a left-right arrangement that suits scale vehicle builds with separate front light positions. The boards carry mounted electronic components and pre-fitted wire leads in several colours, which helps keep polarity and routing distinguishable during installation. The 7.2 V specification anchors the set to model electrics that match this voltage, while the compact format leaves room for integration inside a detailed body or chassis area. As an accessory rather than a complete vehicle, the focus stays on functional lighting hardware for upgrades, repairs or project-specific conversions. In workshop use, the set fits naturally into custom 1:14 builds where front lighting is part of the finished look and electrical layout. It also suits replacement work on existing models that need matched headlight electronics on both sides.

Electronics

1:14 MB Side-marker LED Set, model accessory

€17.99

Side-marker lights are a small detail with a big effect on a finished truck build, and this 1:14 MB Side-marker LED Set brings that scale look into compatible model projects with 2 light units for 7.2 V and 12 V setups. The compact lighting format and ready-made wiring make it a focused addition for builders refining exterior details on a model rather than changing its core mechanics. The set belongs to the models and accessories range and is intended as a lighting add-on for 1:14 scale applications. Long red and black leads are already attached, with small plugs and connector ends that support integration with existing model electronics. Black heat-shrink sections cover the wire junctions, helping keep the cable runs neat inside the bodywork or along the chassis. Because the set is built around side-marker lighting, it adds a realistic visual accent at the flanks of a truck body where illuminated details shape the finished appearance. On a workshop bench, the wiring can be planned as part of a custom truck build or a lighting upgrade on an existing 1:14 model. In a display setting, the illuminated side markers strengthen the road-going character of the vehicle, while on running models they extend the visual detail beyond the main headlight and rear light areas.

Electronics

1:14 MB Taillight, LED PCB, model accessory

€35.99

This 1:14 LED PCB taillight assembly is built for model projects that call for a clear rear lighting setup and a compact electronic format. With a 7.2 V specification and MB taillight designation, the unit suits enthusiasts looking to refine a compatible build with dedicated illuminated detail. The set uses 2 small circuit boards rather than a single large light bar, which helps distribute the lighting elements across the rear section of a model. Attached multicolour wire leads support connection within the vehicle layout and give the assembly the character of a purpose-made lighting component rather than a decorative add-on. The PCB construction keeps the electronic paths defined on each board, while the pre-mounted light elements concentrate the function into a small installation footprint. In workshop use, the taillight assembly fits naturally into restoration jobs, spare-part replacement, or scale-focused customisation where rear light detail shapes the finished look. Age marking: 14 years and up. For model builders, it adds an electronic lighting element that can help a compatible vehicle body read more convincingly once installed.

Electronics

1:14 Roof Lamp PCB, model accessory, 7.2V

€14.49

Roof lighting is a defining detail on many scale truck builds, and this 1:14 roof lamp set adds that electronic accent in a compact 7.2V format. The set includes 2 matching round PCBs, each fitted with an SMD LED and attached wires, making it a dedicated lighting accessory for model projects rather than a complete vehicle unit. The small board layout keeps the focus on the lighting function itself, with each module combining the LED element and PCB structure in one compact part. That format suits hobby builds where visible scale details matter and where wired components need to sit neatly within the model. The 1:14 scale reference makes this set relevant for matching scale projects, while the 7.2V specification defines the electrical setup the boards are designed for. With 2 lamp boards in the set, the lighting can be arranged as a balanced roof pair on a compatible build. In a workshop setting, the boards suit model upgrades, replacements, or fresh custom projects that call for roof-mounted lighting detail. The wired design also supports integration into existing electronic layouts where a separate lighting component is needed.

Electronics

1:14 Roof Lamp, model accessory, 12V SMD LED

€14.49

Roof-mounted auxiliary lights are a familiar detail on working trucks, and this 1:14 roof lamp set brings that look into a scale build with a compact electronic format. The set includes 2 round lamp units, each built on an SMD LED PCB and designed for 12V operation, making it a focused addition for model builders refining a vehicle's upper bodywork. The small PCB-based construction keeps each light unit compact, while the wired layout supports direct integration into a custom lighting setup. In a 1:14 project, details placed high on the cab have a strong visual effect, and this pair gives that area a more technical, road-ready character. The 2-lamp format also suits symmetrical placement across the roof line, which helps preserve the balanced proportions expected in scale truck modelling. Minimum age: 14 years. Whether used in a fresh conversion or as part of an upgrade on an existing model, the lamp pair fits naturally into workshop-style builds where lighting details matter. Combined with other scale body features, the 12V SMD LED units add a precise finishing touch that reads clearly in close-up display views and during running sessions alike.

Electronics

1:14 SMD-LED White 7.2V, lighting set

€9.99

This 1:14 lighting set brings white SMD-LED illumination to scale model projects that use a 7.2 V electrical setup. With 2 light units in the pack, it adds a compact lighting solution for builders working on vehicle detailing, replacement work, or custom electronics integration. The set is based around small SMD-LED components, making it suitable where a discreet light source is needed inside a model body or behind existing light positions. The product image shows a red-and-black two-wire cable prepared for connection and 2 blue axial resistors with metal leads, pointing to a layout intended for wiring into a model's electrical system. This makes the set relevant for hobby tasks that involve soldering, cable routing, and adapting lighting to a 1:14 build. In use, the 2 white LEDs can be installed as a pair for symmetrical lighting on the same vehicle or used to restore an existing light function on a scale model. The 1:14 format keeps the set aligned with matching model dimensions, while the 7.2 V specification gives a clear electrical reference for planning the installation within a workshop or hobby bench setup.

Electronics

1:14 Trailer Side Marker, model accessory

€34.99

Side marker lights are part of the visual language that gives a scale trailer its convincing road-going character. This 1:14 set is made for model trailer lighting layouts and runs on 7.2 to 12 V, fitting common electrical setups used in hobby truck builds. The set consists of 2 orange side markers with attached wiring, shown with red and black leads for straightforward polarity recognition during installation. Their compact format suits placement along the trailer sides, where marker lights define the outline more clearly and add a technical finishing touch to the body. As an electronic accessory in the Models & Accessories range, this set is aimed at hobbyists working on custom truck or trailer electrics rather than a complete ready-to-run vehicle. The 14+ age marking is stated in the product data. Used on a workshop build, a display trailer or a running road rig, the lights add a small but noticeable scale cue once connected to a suitable power system. They also work well when an existing trailer setup needs replacement marker units in a matching 1:14 format.

Electronics

1:14 Volvo FH16 Headlight, model light unit

€109.99

The Volvo FH16 is known for its distinctive front lighting signature, and this 1:14 headlight unit brings that look into a model build with a chrome-look housing, projector-style centre lens and several integrated light points. The shaped assembly is made for Volvo FH16 model applications and adds a more defined front-end appearance once fitted. Colour-coded wires assign each lighting function directly in the installation guide: yellow for left indicator, orange for right indicator, black for driving light, pink for high beam, green for fog light, grey for daytime running light and white for cornering light. The supplied documentation also shows mirrored left and right connector layouts, which helps place each lamp module correctly on the vehicle front. A rear cover is secured over the internal board with 1 x M2x12 screw and 2 x M2x10 screws. The safety note in the data states that reversing polarity or increasing the supply voltage can damage the SMD components. This light unit suits detailed truck model projects where the front section is being repaired, upgraded or completed with the correct lamp layout. The documentation also notes a front bumper adjustment on part MF6, where 15 mm must be removed before bumper installation in the shown setup, giving model builders a clear reference for fitting work.

Electronics

1:14 VolvoFH16 Front Indicator, model spare part

€65.99

The Volvo FH16 has become a familiar sight in long-haul transport, known for its modern cab design and strong road presence. This 1:14 front indicator spare part brings that truck-specific detail into a compact replacement component made for model-building enthusiasts working on compatible VolvoFH16 truck setups. The assembly combines a curved translucent light element with a twisted red and yellow cable and a protected section finished with black heat-shrink tubing. That layout supports clean routing inside a model body where space is limited and wiring needs to stay organised around the front end. The 7.2 V and 12 V specification gives a clear electrical reference for matching the part to an existing lighting system without guessing across incompatible voltage ranges. As a dedicated model spare part rather than a generic wire lead, it suits repair work, restoration projects, or detail-focused rebuilds where the original front lighting arrangement needs a like-for-like replacement. On the workbench, the compact harness format fits naturally into maintenance sessions focused on worn lighting parts or incomplete truck builds. In a finished 1:14 display or running model, the front indicator helps restore the intended look of the VolvoFH16 front section while keeping the electronics layout aligned with the model's original lighting function.  Warning! Not suitable for children under 14 years.

Electronics

Flashing Light Set, RC accessory, 2 orange beacons

€82.99

Orange warning beacons are a familiar sight on construction machines, heavy-duty transporters and service vehicles, and this RC lighting set brings that visual cue into scale form with 2 compact flashing lights. Each beacon measures 14.5 mm in diameter and 25 mm in height with support, giving cabs, trailers and work-focused builds a clearly defined roof-mounted signal detail. The lighting effect comes from SMD flashing electronics that control 4 bulbs in sequence for a rotating beacon look rather than a static glow. The movable light can be mounted on a support with up to 5° slope, which helps when a cab roof or body panel is not completely level. The set is designed for broad use across construction site vehicles, heavy-duty vehicles, mockups and trailers. Connection-ready circuitry with shrinking tube is included, and the electronics module measures 37 x 30 x 5 mm for compact installation inside the model. Activation runs through a free switch cable on the receiver, so the beacons can be switched as part of the RC setup instead of being wired as a constant light. A Graupner-J/R connection cable is fitted for direct integration into compatible systems. The set suits scale builds that rely on functional lighting details to complete the look of working vehicles on the move or at a standstill.

Electronics

Gearboxmotor Support Legs, trailer spare part

€37.49

This geared motor is the dedicated drive component for Carson trailer support legs and is specified in the product data as the required accessory for 500907218 electrical support legs. Its compact format combines a cylindrical motor body, a gearbox section and an output shaft for installation in the matching trailer mechanism. The gearbox layout is designed to transmit the motor's rotation through the support leg drive, while the attached red and black wires provide the electrical connection points for integration into the intended setup. The product data identifies this version as 1 piece, making it suitable as a replacement part or as one unit toward a complete support leg drive arrangement. The same data also states that 2 pieces are required for the full electrical support leg configuration on compatible Carson trailers. Within a workshop, service bench or model trailer rebuild, this component fits the kind of task where a worn or missing drive unit needs to be exchanged with the correct matching motor. The stated age marking is 14 Years. As a model-building accessory, it focuses on the functional side of trailer equipment by supplying the motorised basis for the electrical support leg system.

Electronics

Orange Flashing Light, RC accessory, 2 beacons

€79.99

Warning beacons are a defining detail on service trucks, heavy hauliers and site vehicles, and this RC lighting set brings that look into a compact 15 x 10 mm format. The 2 orange beacons use SMD flashing electronics and 4 LEDs per light to generate a sequential flash pattern that recreates the visual character of a rotating beacon on model cabs and working bodies. The set is designed for roof mounting and adapts to different body shapes with a slewable base that allows fitting at angles of up to 5°. Each beacon base measures 14.5 mm in diameter, while the height with socket is 15 mm, making the assembly suitable for installations where scale appearance and limited mounting space both matter. Control runs through a free switching channel on the receiver, so the beacons can be activated as part of a broader RC effects layout. The wired circuit board is supplied ready for connection and is housed in a heat-shrinkable sleeve. Included in the set are 2 beacons, the connection-ready circuit board and a Graupner-J/R connection cable. The lighting arrangement suits construction vehicles, heavy duty tractors, superstructures and trailers where visible warning signals complete the working-vehicle character of the model.

Electronics

Reflex2 14Ch Gear Shift Gate Spare Part

€5.79

The Reflex2 14Ch VA gear shift gate is a dedicated spare part for the matching Carson transmitter system, built around a stamped metal plate with a precise selector profile. Its flat circular form, silver finish, rounded inner cutout and 4 evenly spaced outer notches define how the part sits and works inside the control mechanism. That geometry matters in use: the shaped central opening guides the movement path, while the outer notches provide the locating points needed for correct alignment in the intended assembly. Instead of a generic hardware piece, this is a model-specific replacement component designed for the Reflex2 14Ch VA layout. The metal construction gives the part a crisp technical character and makes it suitable for maintenance work where the original selector plate needs to be replaced. In a workshop setup or at the bench between driving sessions, this spare part supports the upkeep of compatible radio equipment with a component matched to the named system. The 14 Years age marking places it within the hobby-focused Carson Modelsport range, where accurate replacement parts help keep existing control hardware in service.

Electronics

1:14 License Plate Illumination, PCB Module

€18.99

Scale vehicle lighting often comes down to the small details, and this 1:14 PCB license plate illumination module adds that finishing touch with a dedicated board for number plate lighting. Designed for 7.2 V to 14 V systems, the compact circuit board brings a focused electrical solution to model builds that call for a realistic rear lighting accent. The board uses a simple, purposeful layout with visible copper traces, 2 illuminated light points and a mounted resistor marked 222. Red and black wires are already attached to the central solder pads, giving a clear polarity-based connection path for installation into an existing model electrical setup. This makes the module suitable for hobby work such as upgrading a scale truck, replacing a worn lighting unit, or adding a separate number plate light circuit to a custom body section. In use, the small-format PCB suits projects where space is limited and clean integration matters. On a workshop bench, it supports careful wiring and placement; once fitted to a 1:14 vehicle, it helps complete the look of the rear section with a precise illuminated detail that matches the character of scale model building.

Electronics

1:14 SemiTrailer LightUnit 7sect., trailer lights

€72.99

Rear lighting is one of the details that gives a 1:14 truck build its finished road-going character, and the SemiTrailer LightUnit 7sect. brings that look to the back end of a matching semi-trailer. The set is built around a 7-section rear light arrangement with red and white lens areas and an orange indicator LED positioned on the outer side of the lamp cluster. The electrical side is laid out as a dedicated light-kit with a multi-pin plug, a panel-mount socket, a white 6-position connector and 2 compact LED circuit boards. The installation sequence shown in the supplied data places the LED boards into the rear light housings from the back, then connects both plugs to the harness with the correct polarity. Cable routing runs along the underside of the chassis, where the wiring can be guided neatly toward the rear assembly and the driver's cab connection. The bumper carries the mounted rear lights, so the finished setup concentrates the visual effect in the correct trailer position rather than scattering separate lamps across the frame. In a workshop setting, this kind of upgrade suits builders refining a 1:14 truck and trailer combination with more convincing rear-end detail. Age marking: 14 years. This is a hobby accessory for model builds where wiring, mounting and final function testing are part of the installation process.  Warning! Not suitable for children under 14 years.

Electronics

Control Switch Dumptrailer-Spindle Drive, switch

€16.29

Built for functional model engineering, the Control Switch Dumptrailer-Spindle Drive adds a dedicated control point to a compatible dump trailer setup. The prewired switch assembly is intended to control the gear motor of the spindle drive with shaft joint 500907056, giving the tipping mechanism a clear electrical interface within the model. The wiring layout combines a BEC connector with 2 free cable ends for connection into the drive circuit. Power is supplied through the BEC connector system and supports 7.2 V NiMH or 7.4 V LiPo accumulator packs, which fits established RC power formats for model-building enthusiasts. With an ampacity of up to 5 A, the switch is specified for the electrical demand of the spindle drive application rather than as a generic on off part. The compact switch format with mounted wiring also suits retrofit work, replacement tasks, or planned installation in a custom trailer build. In use, the switch becomes part of the working dump function, where the spindle drive gear motor can be actuated as the trailer mechanism is operated. Age marking: 14 years and over.

Electronics

Spindle Drive Gearbox-Motor, RC accessory

€55.99

Electric spindle actuation adds a clear mechanical function to model dump trailers and crawler loaders, and this Spindle Drive Gearbox-Motor is built for exactly that task. The geared motor drives the spindle system so the body can be tilted electrically or the load can be unloaded through powered movement rather than manual handling. The unit is designed for use with the spindle drive with shaft joint N° 500907056, where the motor output feeds the spindle mechanism through geared rotation. A square metal output shaft forms the connection point for the drive system, while the integrated gearbox and motor housing keep the assembly focused on controlled motion for lifting tasks. Operation is handled through a remote controlled switch or the CARSON switch N° 500907070, making it suitable for model-building layouts that call for a separately triggered dump function. The stated dimensions are 700 mm in length, 185 mm in width and 235 mm in height. In a working model setup, the geared drive supports realistic tipping action on a dump trailer or electric unloading on a crawler loader. Age marking: 14 Years.

Electronics

1:14 12V Spotlight, model accessory, rectangular

€26.99

Rectangular auxiliary lamps are a familiar detail on working trucks and utility vehicles, and this 1:14 set brings that look into scale form with 2 matching 12V spotlights for model projects. The black lamp bodies, clear textured fronts and compact stem mounts create a purposeful add-on that suits technical vehicle builds. Each light unit is supplied as a separate wired component, making the pair suitable for custom placement wherever the model design calls for extra lamp detail. The rectangular lens format gives a different visual character from round lamps and fits especially well with truck, construction and service-style subjects. The visible internal light element behind the transparent cover adds depth to the front view, while the long cables support integration into compatible electrical layouts. As a dedicated 1:14 accessory, the set is aimed at hobby builds where scale appearance and added lighting equipment are part of the overall finish. Mounted on a roof bar, fixed to a bumper or positioned as work lights on a body section, the 2 lamps expand the visual equipment of a model without changing its core layout. For display builds and running vehicles alike, the pair adds a crisp technical accent that complements detailed 1:14 scenes and conversions.

Electronics

1:14 Beacon Light Bar Set FH16, RC light set

€144.99

The FH16 is a familiar sight in long-haul truck styling, and this 1:14 Beacon Light Bar Set brings that look into a model build with a dedicated roof light unit and matching control electronics. Designed for 7.2 V and 12 V systems, the set adds a technical lighting function that suits detailed RC truck projects where visible wiring, voltage handling and installation layout all matter. The elongated light bar sits in a grey housing with rounded ends and carries a central LED board fitted with multiple SMD LEDs. Two mounting holes are built into the housing for screw installation, and the cable lead routes the light unit to the separate module. On the controller, terminals marked 1, 2, 3, 4 and + organise the connections, with 4 outputs rated at 500 mA each. A servo-style plug supports integration into the RC setup, while the DIP switch allows selection between Uout=Urc(BEC) and Uout=6.0-14 V. That combination suits scale truck projects where auxiliary lighting is part of the overall finish rather than an afterthought. The set can be worked into a fresh FH16 build or added during an electronics refit, giving the model a more defined roofline and a functional light signature that matches the technical character of RC truck detailing.

Electronics

1:14 LED-PCB 7-Section Taillight, model accessory

€57.99

This 1:14 LED-PCB 7-Section taillight brings detailed rear lighting to compatible model vehicle builds with a compact 7.2 V circuit layout and a matched left and right board set. The mirrored PCB pair adds a technical finishing touch at the rear of a truck or trailer body, where light functions and scale detailing matter just as much as the bodywork itself. Each green board is marked L or R and fitted with preattached wires in blue, black, white, red, yellow or orange, depending on side assignment. The wiring diagrams show how the connections are allocated across several rear-light functions, including brake light, driving or running light, taillight, reversing light and blinker operation. Mounting holes on the boards support fixed placement inside the light area, while the compact PCB format suits model installations where space is limited and cable routing needs to stay orderly. Suitable for item no. 907037, the set is intended for left and right installation rather than a universal single-side fit. In a workshop setup, the labelled boards and colour-coded leads help keep orientation clear during installation or replacement. Once integrated into a compatible 1:14 vehicle, the rear section gains a more complete scale look with function-based light positions that match the technical character of model truck and trailer builds.

Electronics

1:14 LR LED Front/Rear Light PCB, model accessory

€27.99

Lighting details can change the whole presence of a scale truck, and this 1:14 LR LED Front/Rear Light PCB set brings that effect into a compact electronics accessory for compatible model builds. The set is designed for 1:14 LR applications and uses LED technology with 2 printed circuit boards to create front or rear lighting points that suit detailed finishing work. The accessory format focuses on the electrical side of model customisation. Prewired LED units are included, so the lamp elements already carry attached leads for integration into the vehicle layout. The stated 7.2 V specification defines the intended operating voltage, and the included resistors form part of the circuit setup for that voltage. This makes the set suitable for hobbyists who want to add functional light elements while keeping the installation based on clearly defined components. The compact lamp housings and separate mounting parts shown for the set support precise placement on the model. On a workshop bench, during a body upgrade, or as part of a scale truck rebuild, the lighting set adds a more technical finish to the vehicle. Age marking: 14 years and over. This accessory suits projects where visible electronics details and model-specific light positions are part of the overall build concept.

Electronics

1:14 LR634 Electronic Control Unit, RC module

€509.99

Built for the LR634 at 1:14 scale, this electronic control unit concentrates the model's main wired functions in one compact module. The housing measures 85 x 53 x 21 mm, weighs 82 g and combines 5 electronic speed controllers with lighting control and a reversing beeper, creating a central interface for a complex tracked machine layout. The wiring system is arranged for multiple dedicated tasks inside the model. Receiver inputs cover channel 1 to channel 6, and the connected outputs are assigned to the right track motor, left track motor, lift spindle drive, tip spindle drive and rear ripper spindle drive. A rotary potentiometer trims the track balance by up to +/- 10%, which helps correct straight-line running when one track pulls harder than the other. LED status indicators work with 2 push buttons for transmitter alignment and neutral setting. The light connection supports up to 1 A, and the battery input is designed for 7.2 V to 8.4 V systems. In use, the module suits detailed installation projects where several drive and auxiliary functions need coordinated control in one crawler loader model. A battery pack is required separately. The unit also supports voltage monitoring for 7.4 V 2S Li-Po operation, with optical and acoustic low-voltage warning signals during running.  Warning! Not suitable for children under 14 years.

Electronics

1:14 LR634 Gearboxmotor, model spare part

€83.99

Built for the Liebherr LR 634 in 1:14 scale, this gearbox motor serves the powered shovel and rear ripper functions with a dedicated drive layout for the model's working mechanisms. The compact unit combines an electric motor with a metal gearbox and output shaft, creating the geared motion needed where direct motor speed would be too high for controlled actuation. The technical data gives a clear picture of its operating range: rated voltage is 7.2 V, with a working voltage from 5 to 8 V. No-load speed reaches 560 rpm, while constant speed is specified at 440 rpm. A 63:1 transmission reduces speed at the output and supports the stated constancy torque of 105 mNm for mechanical movement under load. Electrical values include 360 mA no-load current and 1.4 A steady current, which helps when matching the replacement unit to the existing installation and drive setup. At 26 g, the motor remains compact for integration into the LR 634 mechanism without adding unnecessary mass to the moving assembly. As a model spare part, it suits repair work, maintenance, or the restoration of powered shovel and ripper operation on the tracked loader. Age 14+

Electronics

1:14 Volvo FH16 XL750 position lamp LED set

€64.99

Position lamps are a defining detail on modern road trucks, and this 1:14 LED set is tailored to bring that look to the Volvo FH16 XL750 in model form. The layout combines compact lighting electronics with cable harnesses and connectors, giving hobby builders a dedicated way to add illuminated marker accents that suit the scale and subject. The set is specified for 7.2 V to 12 V systems, which places it within common hobby electronics setups for scale trucks and related conversions. Twisted wire leads help keep the cable runs organised, while the small green circuit boards provide the base for the lamp functions in a format that fits more easily into confined body sections. Multiple connector ends support integration with existing model electrics where matching connections are used. As an accessory for 1:14 models, the focus stays on lighting detail rather than drive components or body hardware. Installed on a Volvo FH16 XL750 build, the LEDs add visible scale character when the truck is displayed on a shelf, photographed in a workshop setting or run as part of a detailed RC lorry setup. The electronic layout also suits enthusiasts refining a truck project with extra lighting functions that sharpen the overall look of the finished model.  Warning! Not suitable for children under 14 years.

Electronics

Drive Gear Liebherr Track Loader Spare Part

€59.99

This drive gear is made for the Liebherr LR 634 track loader and serves as a dedicated spare part within the model's drive system. The component works with the gear motor to transmit motion into the loader's running mechanism, giving model-building enthusiasts a precise replacement for maintenance or repair work. The product data states that 2 pieces are needed for the application, and this set contains 2 drive gears. That makes it suitable for replacing the required pair in the Liebherr LR 634 setup without mixing unmatched parts. As a model supplies component in the Models & Accessories range, it fits naturally into workshop stock for ongoing servicing of a working scale model. Whether a worn gear is being exchanged or a drivetrain is being restored to operating condition, this spare part supports focused repair sessions on the Liebherr LR 634. The clearly defined application helps keep parts selection straightforward when the drive system calls for the specified gear pair.

Electronics

Fliegl Spindle Drive Gear Motor, model spare part

€84.99

The Fliegl dump trailer uses a spindle mechanism to raise and lower its tipping body, and this gear motor is the drive component made for that task. The unit combines a compact electric motor, an integrated gearbox and a metal output shaft, so rotational power can be transferred directly into the matching spindle system of the model. The gearbox section reduces speed and supports the torque needed for controlled mechanical movement, which suits lifting functions more closely than a plain motor alone. Electrical connector tabs at the rear form the power contacts, while the front gearbox housing carries the shaft that links the drive to the trailer mechanism. As a dedicated spare part, it is intended for the Fliegl dump trailer rather than as a universal motor for unrelated builds. The compact format also suits installation where a model mechanism needs a self-contained motor and reduction stage in one assembly. In workshop use, this component fits repair, maintenance or replacement work on a Fliegl trailer model with spindle-operated tipping action. Age marking: 14 years. For model-building enthusiasts, it serves as the functional link between electrical drive input and the trailer's lifting movement.

Electronics

Gearboxed Motor Low loader/Goosneck 22mm

€99.99

This 1:14 gearbox motor is made for low loader and gooseneck model applications where compact powered movement is part of the build. The 22 mm format combines a black motor housing, a silver gearbox section and a protruding output shaft, creating a clearly defined drive unit for technical model installations. The geared layout converts the motor's rotation into usable torque at the shaft, which makes it suitable for mechanisms that need controlled movement rather than direct high-speed output. Two electrical contact tabs provide the connection point to the model's power system, while the compact cylindrical form helps when space inside a trailer or functional assembly is limited. As a dedicated component for model supplies, this motor fits enthusiast projects that add working functions to transport models or replace an existing drive unit with the same application. In workshop-based RC builds, the motor can be integrated into low loader or gooseneck mechanisms that depend on powered rotation through a gearbox. The age marking is 14 years, and the technical layout suits hobby-focused model construction with a clear emphasis on functional mechanical detail.  Warning! Not suitable for children under 14 years.

Electronics

1:14 Flashing Light Set, accessory, 2 LED

soon available again

HELLA-style rotating beacons are a familiar sight on working trucks, service vehicles and recovery rigs, and this 1:14 flashing light set brings that visual cue into a scale build with 2 LED units and compact roof mounting. The set is designed for 1:14 truck models and adds programmable warning-light movement that changes the character of a cab line with a small but highly visible detail. Each beacon uses 7 SMD LEDs and offers 13 adjustable programs in total. The sequence range covers 6 rotation programs and 7 stroboscope programs, with left and right rotation options and different intervals including 40 ms, 70 ms and 200 ms modes. A 3-wire servo connection is used for each light, with orange for signal, red for plus and brown for minus. Programming is handled through the marked contact area on the PCB, and 2 different settings can be saved in the integrated memory function. Installed on a truck cab, the pair suits workshop, municipal, escort or breakdown styling where roof lighting is part of the look. The mounting requires a 4.5 mm hole, and the included compensation parts support installation on roof slopes up to +/-5°. A switch channel with a 3-position On Off On layout allows stored functions to be activated, deactivated or changed during use.

Electronics

Reflex2 6Ch Gear Shift Gate RC Accessory

soon available again

The Reflex2 6Ch. VA gear shift gate adds a dedicated control insert to a compatible Carson radio setup, bringing a more defined shifting layout to the transmitter area. Its precision-cut form, visible in the shaped centre opening and 4 outer notches, gives this small metal component a clear mechanical role within the control assembly. As an accessory for the Reflex2 6Ch. VA, the gate focuses on the handling point where shift inputs are guided. The silver-coloured metal part has a flat circular format that suits compact installation and storage among workshop spares. The shaped inner opening is not decorative; it creates the path that guides lever movement across the gate. That makes the component relevant for hobby users who value a more structured control feel on compatible RC driving setups. 14 years and up is the stated age marking. On the bench, the part fits naturally into a transmitter maintenance or upgrade routine. During RC sessions, the defined slot pattern supports deliberate shift inputs and keeps the control layout visually clear around the shifter area.

Electronics

1:14 Position-Light Unit FH16, model lighting

soon available again

The FH16 tow truck is known for its broad, light-rich road presence, and this 1:14 Position-Light Unit translates that character into a dedicated lighting set for the model. PCB-mounted LEDs, separate wired light points and long twisted leads give the installation a technical, scale-focused look once fitted into the body. Two compact light boards carry upright clear LEDs and use central mounting holes for secure placement. Additional LEDs sit on separate leads, so individual light points can be positioned away from the boards where the body layout requires them. The installation diagram shows 18 lamp positions with a 1.6 mm drilling pattern and assigns the wiring to channels E, F, G and H for an organised layout. The circuit is shown for 6.0-14 V operation, with a separate note for 12 V use and polarity guidance during connection. This set suits detailed truck builds, restoration work and lighting upgrades on an FH16 tow truck in 1:14 scale. During installation, the routed cables, mounted lamp points and grouped connections create a clean electrical layout that supports marker lights and indicator functions across the model body.

Electronics

15x10mm Blue Flashing Light w/ El.(2)

only available from customer service

Carson rotating beacon 500907126: Two blue rotating roof lights with SMD flashing electronics generate the rotating light effect via four bulbs flashing in series and can be controlled via a free switching channel on the receiver. Roof mounting; swivels ±5°; base Ø 14.5 mm, height 15 mm. Delivery: 2 lights and ready-to-connect circuit board (37×30×5 mm) with heat-shrink tubing and Graupner J/R cable.

Electronics

1:14 12V LED-PCB Cascadia Taillight

only available from customer service

Electronics

1:14 7,2V LED-PCB Grand Haul.Taillight

only available from customer service

Carson 500907393 Grand Hauler tail light circuit board 1:14, 7.2V combines four light functions: right/left indicators in red, three position lights (red) with brightened brake light and reversing light. Perfect for detail-loving model builders. Color-coded strands, length approx. 550 mm, scope of delivery: one lighting circuit board and instructions. Note: not compatible with TAMIYA MFC.

Electronics

1:14 Bumper Light-Kit Grand Hauler fr/re

only available from customer service

The 1:14 Grand Hauler LED kit 500907254 has been specially developed for the Grand Hauler and allows the front and rear bumper to be retrofitted with LEDs, ideal for detail-loving model builders. Can only be used in conjunction with MFC 01 or MFC 03. Scope of delivery: Connection unit with low-voltage protection, front circuit board (1×4 + 2×2 orange), rear circuit board (1×4 red), connection cable for MFC and battery.   Warning! Not suitable for children under 14 years.