RC servos
Sharp turns, steady throttle: Carson RC servos deliver power, speed and control for every movement.
RC servos
1:10 KO RSx4S-one10X, servo, low profile
505030137€124.99
The KO RSx4S-one10X is a 1:10 low-profile servo shaped for compact RC chassis where installation height and steering packaging need careful control. Its metal gear layout and the stated 11.8 V specification place it firmly in performance-focused electronics setups, giving model-building enthusiasts a concrete steering component for advanced builds. The low-profile housing suits layouts where body clearance, linkage position and surrounding electronics leave little spare room. In that context, the 0.10-second speed figure supports fast steering response when direction changes need to happen with little delay. The servo format also makes it relevant for 1:10 on-road and competition-style configurations that rely on tidy component placement rather than oversized hardware. As an electronic control component, it belongs in a build where the steering system, power supply and chassis geometry are chosen as a matched package. On the bench, the compact form helps when planning a clean electronics layout around the steering area. Once installed in a compatible 1:10 model, the combination of low-profile dimensions, metal gears and high-voltage operation supports focused tuning for precise handling response. Warning! Not suitable for children under 14 years.
RC servos
CS-10 Digital Servo, RC servo, waterproof
500502051€31.99
Compact RC control systems rely on a servo that turns radio signals into exact movement, and the CS-10 Digital Servo is built for that task with digital regulation, waterproof construction and a JR plug layout. The black housing with metallic centre section and splined output shaft is shaped for installation in common model applications where steering, throttle or other linkages need controlled travel. Its 0.17-second response supports quick actuation, while the 10 kg torque rating provides the force needed for demanding control duties. Ball bearings support the output shaft for smooth running, and the metal gear train is designed for direct transfer of servo movement to the connected horn and linkage. Included mounting hardware expands setup options with a single-arm horn, an X-shaped horn with multiple linkage holes, rubber grommets and a fastening screw. The 3-wire lead uses the familiar red, black and white layout seen across many RC installations. In an RC car, the servo can manage steering inputs through the splined shaft and horn geometry; in a boat or other hobby mechanism, it can drive throttle or moving control parts with the same compact format. The waterproof design also suits outdoor running where spray and damp conditions are part of the session. Warning! Not suitable for children under 14 years.
RC servos
CS-17 Digital Servo, RC servo, waterproof
500502052€34.99
The CS-17 brings digital servo control, waterproof construction and 17 kg actuating force into a compact RC component built for precise movement in demanding model setups. With a stated speed of 0.19 sec and a JR connector on the 3-wire lead, it suits steering, throttle and brake functions where clean signal response and dependable installation matter. The housing combines black end caps with a silver centre section, and the top output shaft is metal with a splined interface for secure horn mounting. Side tabs with screw holes support fixed installation in model vehicles or boats, while the included single-arm horn and 4-arm horn offer different linkage layouts. Multiple adjustment holes on the horns make it possible to alter leverage and control travel to match the mechanism in use. Rubber grommets are included for vibration-damped mounting, and the central fixing screw secures the horn to the output shaft. In an on-road chassis, off-road build or boat hull, the servo can be assigned to the moving function that needs measured, repeatable input. The combination of digital operation, waterproof design and included mounting hardware makes the CS-17 a focused choice for hobby workbenches, replacement jobs and fresh RC builds. Warning! Not suitable for children under 14 years.
RC servos
CS-7 Digital Servo, RC servo, waterproof
500502050€29.99
The CS-7 Digital Servo brings fast digital control to RC installations that need crisp, repeatable movement. With a stated transit time of 0.17 s, this regular-size servo suits steering, throttle or other control functions where quick response and accurate linkage travel matter. The black and silver housing carries a waterproof design, adding flexibility for models that run in wet grass, on damp ground or around spray. Inside the compact case, the servo combines a 7 kg force rating with ball bearing support at the output shaft. That layout helps the spline run smoothly when the horn changes direction under load. The top output shaft accepts the supplied servo horns, including a single-arm horn and a 4-arm horn with multiple linkage holes for different geometry choices. Mounting tabs on the case and the included rubber grommets support secure installation in a chassis, frame or other model structure. The attached 3-wire lead uses a JR plug for connection to compatible radio systems. In cars, boats, aircraft or other hobby mechanisms, the CS-7 Digital Servo fits wherever controlled rotary movement needs to be translated into precise mechanical action. Age marking: 14 years Warning! Not suitable for children under 14 years.
RC servos
KO BSx4S-one10 Grasper2, Models Supplies
505030216€174.99
KO BSx4S-one10 Grasper2 appears in the supplied conformity data as an electronic component within models supplies, carrying the exact designation KO BSx4S-one10 Grasper2 LP/MG/12,1/0,11. That precise naming helps place it within a hobby setup where exact component matching matters. The available data is technical rather than promotional, so the description stays close to what is verifiable. The component is listed under Models & Accessories and Models Supplies, with a 14 Years age marking in the source data. Battery inclusion is stated as false, which means no battery is named as part of the included contents here. The documentation also records an EU declaration of conformity issued under the manufacturer's responsibility, with references to 2014/30/EU, 2011/65/EU and 1907/2006. Harmonised standards EN55014-1:2021 and EN55014-2:2021 are named in that declaration. For model-building enthusiasts, this kind of exact designation supports careful parts selection when maintaining, replacing or specifying electronics in a compatible RC build. The source data does not provide further functional specifications, dimensions or included accessories, so the focus remains on the documented identity and compliance references of the component. Warning! Not suitable for children under 14 years.
RC servos
KO BSx4S-one10 Grasper2, servo, one10
505030220€184.99
The KO BSx4S-one10 Grasper2 brings a focused servo setup to one10 RC builds, combining a 0.12-second transit speed with a 33 torque rating for direct control input in running and tuning sessions. Its STD and MG specification places it in the standard-size class with metal gear construction, a combination that fits the practical demands of hobby-grade model sport use. Within an RC chassis, the servo is the link between radio command and mechanical movement, and that role makes speed and consistency central to the driving feel. This unit is intended for model applications where steering accuracy or throttle actuation needs a compact, dedicated control component rather than a generic replacement. The 4S designation in the name identifies the series variant, while the one10 reference ties the servo to the widely used 1:10 model class. Batteries are not included. In workshop use, the servo suits fresh assemblies, drivetrain updates and targeted replacements where a standard-format control unit is needed. On the track or during car park running, it supports clean directional changes and controlled input transfer through the steering or throttle linkage, giving hobby builds a clearly defined electronic control element. Warning! Not suitable for children under 14 years.
RC servos
KO ICS-USB Adapter HS Servo/ESC Software
505061028€34.99
The KO ICS-USB Adapter HS Servo/ESC Software adds a direct computer link for supported model electronics setup. Built for use with KO HS servo and ESC software, it connects compatible components to a PC-based software environment where settings can be adjusted with more precision than through on-model controls alone. This accessory belongs in the model workshop where electronic behaviour is tuned to match the chassis, surface and driving style. Servo response, ESC parameters and related software-based adjustments can be handled through the adapter when used with supported systems. Its USB connection makes it a practical bridge between model electronics and screen-based setup work, keeping repeated changes organised during testing or maintenance. Batteries are not included. On the bench before a run, the adapter supports structured setup sessions for supported servo and ESC combinations. It also fits ongoing maintenance work when electronics need reconfiguration after component changes, helping hobbyists return to a known setup with less guesswork. Warning! Not suitable for children under 14 years.
RC servos
KO Neo Advantage Capacitor+, ESC accessory
505045565€35.99
The KO Neo Advantage Capacitor+ for BL ESC is an RC electronics accessory aimed at hobby-grade model setups, with a clear focus on brushless ESC applications. Its compact add-on role suits enthusiasts who fine-tune existing vehicles and control systems rather than starting with a complete ready-to-run package. Placed in the Models & Accessories and Models Supplies range, this component belongs to the technical side of RC building, where each part is chosen for a specific task in the drivetrain or control layout. The supplied compliance record identifies the KO Neo Advantage Capacitor+ for BL ESC by name and documents EU declaration of conformity references to 2014/30/EU, 2011/65/EU and 1907/2006. Harmonised standards EN55014-1:2021 and EN55014-2:2021 are also listed in that record. Batteries are not included. In practical workshop use, this kind of accessory fits into upgrade, maintenance and replacement routines around brushless speed controller installations. It suits RC benches, pit boxes and parts collections where dedicated electronics components are selected to match an existing model setup. The age marking is 14 Years. Warning! Not suitable for children under 14 years.
RC servos
KO PDS-2503 SLP, servo, 7.4 V response unit
505030067€43.99
The KO PDS-2503 SLP is a response servo built for RC model setups that call for quick, direct control signals. With a stated response speed of 0.12 at 7.4 V, it brings a technical specification that matters when steering input or throttle actuation needs to register with minimal delay in a 14 Years hobby environment. As a dedicated servo unit, it belongs at the heart of the control system, translating radio commands into mechanical movement inside the model. That makes it a relevant choice for enthusiasts refining handling characteristics, replacing a worn control component, or planning a fresh electronics layout around a defined voltage figure. The supplied data also confirms that batteries are not included, so any wider power setup remains dependent on the surrounding RC installation rather than on this single component alone. In workshop use, the KO PDS-2503 SLP fits projects where response speed and voltage compatibility are key selection points before the first run. It also suits upgrade work on existing RC models, where a clearly specified servo can help shape a more exact control feel during setup and driving sessions. Warning! Not suitable for children under 14 years.
RC servos
KO PDS-2513 SLP/MG Servo, RC servo unit
505030068€62.99
The KO PDS-2513 SLP/MG servo adds a defined control component to RC model setups, with a stated 9.6 V rating and a response speed of 0.13. In a chassis where steering or throttle inputs need a dedicated electronics unit, that combination gives model-building enthusiasts a clear technical basis for planning a replacement or a fresh installation. As part of the Models & Accessories range, this servo sits in the electronics side of an RC build rather than the body or drivetrain. The KO PDS-2513 SLP/MG designation helps identify the unit accurately when matching parts within an existing setup. The supplied product data also confirms an EU declaration of conformity for this servo, with references to 2014/30/EU, 2011/65/EU and 1907/2006, plus the harmonised standards EN55014-1:2021 and EN55014-2:2021. That gives the component a documented compliance basis alongside its stated electrical specification. On the bench, the servo fits naturally into repair work, electronics upgrades or a planned RC build that needs a named control unit rather than a generic placeholder. It also suits spare-parts storage where exact model identification matters before installation in a compatible RC system. Warning! Not suitable for children under 14 years.
RC servos
KO PDS-2516 SLP/MG, Power Servo, RC servo
505030069€62.99
The KO PDS-2516 SLP/MG Power Servo is an RC servo component aimed at model-building enthusiasts who want a clearly identified electronics part for a fresh build, a workshop replacement or a tuning project. Its designation combines the KO PDS-2516 SLP/MG name with the technical references 10.8 and 0.16, giving the servo a distinct place in parts searches and component matching. Within an RC setup, a servo converts control signals into mechanical movement, making it a central link between radio commands and the steering or throttle function of the model. That makes the exact designation especially relevant when an existing setup calls for a specific servo format rather than a generic substitute. The data also confirms that batteries are not included. An EU declaration of conformity is documented for this electronic component, with conformity references to 2014/30/EU, 2011/65/EU and 1907/2006, plus EN55014-1:2021 and EN55014-2:2021. This servo fits naturally into workshop benches, rebuild sessions and electronics upgrades where the right named component keeps a project moving without guesswork. For hobbyists comparing replacement parts, the KO PDS-2516 SLP/MG designation provides a concrete reference point when matching an RC model's installed control hardware. Warning! Not suitable for children under 14 years.
RC servos
KO RSx4S-one10X, servo, low profile metal gear
505030147€124.99
The KO RSx4S-one10X brings a low-profile servo layout and metal-gear construction into a compact steering component for RC model setups. With its stated 11.8 V specification and 0.10-second transit figure, it is positioned for fast, direct response in electronics packages that call for a space-saving servo format. Its low-profile housing suits chassis arrangements where vertical clearance is limited and a compact installation matters for the overall build. The metal gear train gives the steering mechanism a defined mechanical path from servo output to linkage, which supports consistent input transfer under repeated direction changes. The designation in the source data identifies this as a servo rather than a complete vehicle, so the focus stays on steering performance and integration into a compatible RC platform. No batteries are included. In use, this kind of component fits competition-oriented touring car and one10 model projects where quick steering correction and tidy packaging are part of the setup brief. It also suits rebuilds and electronics upgrades that call for a low-profile servo with a high-voltage specification and a fast stated response figure. Warning! Not suitable for children under 14 years.
RC servos
KO RSx4S-Power H.C, servo, 1:8 RC model
505030145€174.99
The KO RSx4S-Power H.C brings competition-focused servo hardware into 1:8 RC model setups with a stated 26.3 torque figure and 0.13 second speed. In the standard STD/MG format, it is aimed at hobbyists who tune steering response with the same care as chassis balance and drivetrain setup. Its specification points clearly toward demanding RC use: the 4S-ready design suits higher-performance electronics layouts, while the metal gear construction focuses on direct power transfer inside the servo case. The combination of speed and torque supports fast steering corrections through technical sections, tighter line placement in corners, and more consistent response when track grip changes. Because the data identifies this unit as a servo rather than a complete vehicle, it fits naturally into custom builds, race maintenance, and targeted replacement work where a defined control component is needed. Batteries are not included. On the bench, the KO RSx4S-Power H.C suits builders comparing servo characteristics for a 1:8 buggy, truggy, or other RC model in that scale class. At the track, the stated figures support setups where quick input transfer and firm steering authority shape how the model reacts lap after lap. Warning! Not suitable for children under 14 years.
RC servos
KO Servo Model Selector, servo accessory
505061032€18.59
The KO Servo Model Selector for 4S BS/RSx4S adds a dedicated control accessory to the electronics side of an RC setup, giving model-building enthusiasts a focused way to work with compatible servo configurations. Built around KO 4S BS and RSx4S compatibility, it fits naturally into bench preparation before a chassis heads to the track. Instead of changing hardware across different builds, this selector is made to support model-specific servo selection within the stated KO system. That makes it a useful addition when several RC models share the same electronics platform but call for different setup choices. The compact accessory role also keeps the emphasis on tuning and configuration rather than on major component swaps. Minimum age is 14 Years. Batteries are not included. On the workbench, the selector suits organised setup sessions where electronics are matched to a fresh build or adjusted between running days. It also fits trackside preparation, where a compatible servo system can be configured with a more deliberate, model-led approach before driving begins. Warning! Not suitable for children under 14 years.
RC servos
Servo CS-9, RC servo, waterproof metal gear
500502042€22.99
The CS-9 brings regular-size servo control to model builds that need quick response, a waterproof housing and a straightforward JR connection. Its black and blue case, top output shaft and 3-wire lead suit a wide range of RC installations where compact control hardware needs to translate radio commands into clean mechanical movement. Inside the housing, the metal gear transmission is built for repeated steering or control inputs, while the 9 kg rating and 0.1 speed support fast actuation in demanding hobby setups. The included servo horns expand the mounting options at the spline: a single-arm horn and a 4-arm cross horn provide different linkage positions, and the set also includes rubber grommets and a mounting screw for installation. The regular-size format makes the servo a useful choice across different model categories where a standard servo bay is part of the layout. Age 14 Years is stated for this servo. In RC cars, the CS-9 can handle steering duties where quick centring and firm linkage control matter through corners and surface changes. In boats, aircraft or robotics projects, the same servo format supports control surfaces or moving functions that rely on compact dimensions, a JR plug and waterproof construction. Warning! Not suitable for children under 14 years.
RC servos
XS Chassis Servo for RC Models 15 kg
500502069€21.99
The XS Chassis 15 kg servo brings a defined control component to RC model builds where compact installation and solid actuating force matter. With its XS chassis designation and 15 kg rating, it suits layouts that need a servo sized for tighter chassis architecture while still delivering clear mechanical input through the steering or control linkage. Within an RC setup, the servo converts radio commands into physical movement at the chassis, making it a central part of how steering or other linked functions respond in use. The data identifies it as a servo for the XS chassis range, placing it in the core hardware area of model maintenance, replacement and tuning rather than in decorative accessories. This makes it relevant for rebuilds, repairs and planned upgrades where a defined force rating is part of the selection process. Batteries are not included. On the bench, the servo suits projects that call for a compact control unit matched to model hardware in the Models & Accessories field. It also fits routine spare-parts planning for RC collections where a dedicated chassis servo keeps running models ready for the next session.
RC servos
XS Steering Servo CS-3.5, RC servo, 3.5 kg
500502054€14.99
The XS Steering Servo CS-3.5 is a dedicated steering component for CARSON 1:10 XS-Chassis vehicles, built to bring controlled front-wheel movement to the Stadium Fighter and Offroad Fighter Cage models listed for compatibility. Its compact servo format, black housing and top output shaft suit the tight installation space typical of hobby-grade RC chassis. The unit is specified as a 5-pin steering servo with 3.5 kg actuation force, giving the steering linkage the mechanical input needed to turn the wheels through the radio system. Side mounting tabs support fixed installation in the chassis, while the pre-attached lead and connector simplify integration with the matching electronics layout. Compatibility is stated for CARSON XS-Chassis 500404252 Stadium Fighter blue, 500404253 Stadium Fighter orange, 500404254 Offroad Fighter Cage turquoise and 500404255 Offroad Fighter Cage red. Age marking: 14 years+ In the workshop, the servo fits naturally into repair jobs, routine maintenance and spare-parts storage for running fleets based on the XS-Chassis platform. It suits hobby benches focused on keeping 1:10 RC vehicles ready for steering service with the correct dedicated replacement part.
RC servos
CS-5 Servo 5kg/JR, servo, 50 Ncm control
500502015€11.99
The CS-5 Servo 5kg/JR brings controlled movement to RC installations with 50 Ncm torque, 0.17 sec/60° transit speed and a regular-size format that fits a wide range of model sport layouts. In a steering system, throttle linkage or another actuated function, the servo converts receiver commands into precise shaft movement through its Graupner/JR connector setup and 4.8-6 V operating range. Its housing measures 38.5 x 19 x 32 mm and weighs 39 g, which helps when planning installations in tighter chassis sections or compact equipment bays. The side mounting tabs allow the servo to be fixed into the model structure, while the output shaft accepts servo horns for linkage connection and throw setup. This makes the unit suitable wherever a model needs repeatable control input rather than free-running drive power. The electrical specification also makes it a practical match for common RC receiver-powered systems that work within the stated voltage window. In use, the CS-5 can take on steering duties in an RC car, move a control surface in another model format, or operate a mechanical linkage where measured travel and response time matter. The combination of regular-size dimensions, JR connection standard and clearly stated performance data gives hobby builds a solid basis for selecting the right control component. Warning! Not suitable for children under 14 years.
RC servos
Servo CS-13, RC servo, 13 kg waterproof
500502025€25.99
The Servo CS-13 brings regular-size dimensions, 13 kg torque and a waterproof design into one compact control component for RC models. Its 4.8-6 V operating range and JR connector suit common hobby electronics layouts, while the output shaft works with the included servo horns to transfer movement into steering, throttle or brake linkages. Inside the housing, metal gears handle the servo's drive path and support consistent motion under load. The set includes a cross horn, a single-arm horn, rubber grommets and a mounting screw, so different linkage positions and installation layouts can be matched to the model's setup. The 3-wire lead connects the servo to the control system, and the regular-size format suits many model applications where a standard servo footprint is required. The waterproof construction expands its use to builds that face wet ground or damp running conditions. In an RC car, the CS-13 can be installed for steering input or throttle and brake control, depending on the model layout. It also fits other hobby applications that use mechanical linkages and a JR plug connection, making it a practical choice for repairs, upgrades or fresh builds from age 14 years. Warning! Not suitable for children under 14 years.
RC servos
CS-5 Servo 5kg/JR, servo, regular size
500502016€14.99
The CS-5 Servo 5kg/JR brings regular-size servo control to RC model setups with 50 Ncm torque, a 4.8-6 V operating range and a Graupner/JR connector-system. Its compact 38.5 x 19 x 32 mm format and 39 g weight make it a practical choice for installations where the servo has to fit neatly alongside the rest of the radio equipment. The 0.17 sec/60° transit speed gives the output shaft a quick response when steering geometry or throttle linkage needs direct movement. The regular-size format suits many common model layouts, and the connector-system supports integration with electronics built around the Graupner/JR standard. The servo housing includes mounting tabs for fixed installation in the chassis or radio tray, while the splined output shaft accepts servo horns for linkage connection. Age 14 Years is stated for this model component. In use, the CS-5 fits projects where reliable actuation is needed for steering, throttle or other control functions in model builds. It also suits replacement work when an existing setup calls for a regular-size servo with Graupner/JR connection and clearly defined speed, voltage and torque figures. Warning! Not suitable for children under 14 years.
RC servos
Servo CS-6, RC servo, low profile waterproof
500502047€26.99
The Servo CS-6 brings compact low-profile dimensions, waterproof construction and 6 kg control force into one RC servo for space-conscious model layouts. Its metal gear transmission and JR connector suit steering and linkage duties where a clean fit and dependable response matter across changing track conditions. The low-profile housing helps when radio trays, chassis decks or body clearances leave little vertical room, while the stated 4.8-6 Volt operating range supports use across common RC electrical setups. A speed figure of 0.16 adds a concrete reference for the servo's response in steering or control applications. Included components cover the servo itself, a JR connector and a servo horn set, so the mounting and linkage side starts with the core parts already in hand. The horn set adds different connection points for setting linkage position and travel, and the metal output train keeps the transfer from servo shaft to steering system mechanically focused. In touring cars, drift builds, boats or other compact RC models, the CS-6 fits where standard-height servos can become awkward to place. Wet grass, puddles, damp pit areas or splash-prone running sessions make practical use of the waterproof design, while the 14 years marking places it within the hobby-focused end of the range. Warning! Not suitable for children under 14 years.
Additional spares
Alu Servo Horn 27mm, servo accessory, 25T
500503051€7.29
A servo horn is one of the small parts that defines how accurately a model responds, and this aluminium version combines a 27 mm lever length with a 25T spline profile for compatible Carson and FUT servo setups. The dark grey metal finish and compact one-arm layout give the part a clean technical look on the bench and in the chassis. The cylindrical hub uses internal splines to seat on the servo output shaft, where it transfers movement directly into the linkage. Along the arm, 4 evenly spaced holes provide different attachment points, allowing the linkage position to be matched to the required steering or throttle geometry. That hole spacing supports fine setup work during maintenance, replacement or tuning, especially when a worn standard arm is being swapped for a metal alternative. The single-arm format also keeps the function clear in compact RC assemblies where linkage routing matters. In workshop use, this servo accessory fits naturally into rebuilds, repairs and parts storage for model enthusiasts aged 14 years and up. It suits projects that call for a 25T connection and a defined 27 mm reach, whether the goal is restoring a running model or refining the response of an existing linkage layout.
RC servos
CS-6 Servo, RC servo, 6 kg metal gear
500502036€18.99
The CS-6 Servo brings controlled movement to RC steering and throttle functions with a regular-size format, 6 kg force and a 0.2-second response. Its blue and black housing, top output spline and JR plug layout make it a focused choice for model sport builds that need a compact actuator with clear, direct linkage control. Inside the housing, metal gears transfer the servo movement to the output shaft, supporting precise actuation where repeated steering corrections or throttle inputs matter. The 3-wire connector lead links the unit to compatible receiver systems, while the side mounting tabs with screw holes allow fixed installation in a chassis or frame. The supplied horn set includes a single-arm horn and a 4-arm cross horn, each with multiple mounting holes for different linkage positions and throw adjustment. Rubber grommets and the mounting screw complete the core fitting hardware shown for installation. In an RC car, boat or other model using linkage-driven motion, the CS-6 can be assigned to steering, throttle or another control task that needs measured rotational travel. Age marking: 14 Years.
RC servos
CS-9 Servo 9kg/JR, RC servo, regular size
500502024€22.99
The CS-9 Servo 9kg/JR brings regular-size servo control to RC builds that need a compact drive unit with direct mechanical output. With 9 kg torque, a JR connector and a 3-wire lead, it fits into many model setups where steering, throttle or other moving functions are controlled through a servo arm and linkage. The rectangular housing carries mounting tabs for screw fixing, and the splined output shaft accepts different horn layouts for varied linkage geometry. A single-arm horn and a 4-arm cross horn are shown, each with multiple mounting holes that allow different attachment points for rods and control linkages. Rubber grommets sit in the mounting points to isolate the servo during installation, and the central fixing screw secures the horn on the output shaft. The short description states a 0.2 s speed rating and MG specification, adding a concrete performance figure and metal gear construction for hobby applications. In an RC car, the servo can translate steering input into wheel movement through the horn and linkage. In boats, aircraft or other model mechanisms, the same output layout supports controlled motion wherever a compact rotary actuator is needed. The 14 Years age marking places the CS-9 in the hobby category for model-building enthusiasts and RC setups. Warning! Not suitable for children under 14 years.
RC servos
Servo CS-3, RC servo, low-profile waterproof
500502035€23.99
Compact dimensions matter in tightly packaged RC builds, and the Servo CS-3 brings that advantage with a low-profile housing, metal gears and waterproof construction in one control component. The flat form leaves more space beneath body shells and around steering assemblies, which is especially useful where chassis layouts limit servo height. The CS-3 operates on 4.8-6 Volt and uses a JR plug for connection to compatible RC electronics. Its stated 3 kg rating gives a clear reference point for steering or control tasks in suitable model applications, while the 0.16 specification points to responsive movement for precise input transfer. Metal gearing supports the servo's internal drive path, and the included servo horn set expands the available linkage setup options right from installation. The housing shown with a 3-wire lead and compact top output shaft layout suits the practical demands of model cars, boats and other radio-controlled builds where clean routing and controlled movement matter. In a touring chassis, crawler conversion or other space-conscious project, the low-profile format helps keep the installation neat without giving up key control hardware. Wet running sessions, splash-prone surfaces and mixed-condition track days fit the waterproof design, while the horn options support different connection points during setup. Warning! Not suitable for children under 14 years.
RC servos
Servo CS-6, RC servo, waterproof metal gear
500502041€20.99
The Servo CS-6 brings regular-size format, waterproof construction and a metal gear train into one RC servo for model applications that need controlled movement under load. With 6 kg output and a JR plug, it suits installations where a standard servo must slot cleanly into existing RC layouts for steering, throttle or other linkage-driven functions. The black housing carries a central output shaft topped with a cross horn, and the included horn set adds both a single-arm option and a 4-arm servo horn with multiple mounting holes. That layout allows different linkage connection points and helps tune the travel to the mechanics of the model. Rubber grommets support the mounting points during installation, and the supplied screw secures the horn to the servo shaft. The short designation also states a speed value of 0.2, adding another concrete reference point for hobby setups that balance force and response. In an RC car, boat or other model with servo-operated controls, the CS-6 fits the role of a compact actuator that converts radio commands into precise mechanical movement. The waterproof build makes it a practical choice for running sessions where spray, wet grass or puddled surfaces are part of the route. Warning! Not suitable for children under 14 years.
RC servos
X-Crawlee PRO, servo, waterproof metal gear
500502046€25.99
Built for wet sections and technical crawling lines, the X-Crawlee PRO servo combines waterproof construction with a metal gear train and 6 kg steering force in a regular-size format. The CS-6 unit is designed as a dedicated servo for the X-Crawlee PRO, giving RC model setups a compact control component that suits muddy ground, splash zones and mixed outdoor terrain. The housing carries a JR connection lead for integration with compatible RC electronics, while the included servo horns provide the mechanical link for steering or other control tasks. Rubber mounting grommets sit at the fixing points to help decouple vibration from the chassis, and the included mounting hardware supports a tidy fit during installation. The metal gear layout is a key match for applications where steering loads rise on rough surfaces, because the gear train transfers servo movement directly to the linkage with a solid mechanical feel. On rock sections, damp forest tracks or backyard crawler courses, the waterproof build keeps the servo focused on control rather than conditions. Combined with the regular-size format, the set fits naturally into hobby-grade RC builds that need a dedicated steering component for precise input under load. Warning! Not suitable for children under 14 years.
RC servos
CS-10DS Low-Profile Servo, RC servo, waterproof
500502063available from December
The CS-10DS Low-Profile servo brings a flat 25 mm overall height together with quick steering response, making it a strong fit for RC chassis where installation space is tight and steering inputs need to register fast. In touring cars, drift models and buggies, the compact 40.5 x 20.5 x 25 mm format sits neatly into layouts that leave little room for a taller unit. At 6V, the servo delivers 9.53 kg.cm and moves through 60° in 0.09 sec, combining steering force with sharp reaction speed in one compact assembly. A coreless motor drives the action, while the metal gearbox passes that output on through a more direct mechanical path than a basic gear train. The 2 ball bearings support the shaft under repeated steering movement, and the 25-tooth output gearing gives a defined mounting point for compatible servo arms. The housing is waterproof, which broadens the range of running conditions when a model heads onto damp tarmac, dusty car parks or mixed outdoor surfaces. Weight stays at 44.3 g, helping this servo suit builds where component dimensions and mass both matter. A servo horn set is included for installation. The JR connection supports integration into many RC model layouts, making the CS-10DS a focused upgrade for steering systems that need speed, torque and a low-profile form.
RC servos
CS-15DS Low-Profile Servo, RC servo, waterproof
500502064available from December
The CS-15DS Low-Profile servo brings compact dimensions, high steering speed and strong output into one RC upgrade for 14 Years and up. With a housing size of 40.5 x 20.5 x 27.5 mm and a weight of 52 g, this low-profile unit suits chassis layouts where installation height matters but steering performance still needs to stay sharp. Inside the case, a coreless motor drives a positioning time of 0.07 sec per 60° at 8.4 V, giving fast reaction to steering commands during touring, drift or buggy running. The output reaches 15.6 kg.cm at 8.4 V, and the metal gearbox is built to transmit that force with controlled, accurate movement. Two ball bearings support the drivetrain and contribute to steady servo action through repeated direction changes. The JR plug-in system supports straightforward integration into compatible RC setups, and the included servo horn set provides the mounting hardware needed for installation. The waterproof construction keeps the servo ready for sessions in rain or on damp ground where exposed electronics face harsher conditions. In flat on-road chassis, drift builds or modern buggy platforms, the low 27.5 mm overall height opens up space-sensitive installations without giving away the speed and torque needed for precise steering input.
RC servos
CS-16DS Low-Profile Servo, RC servo, waterproof
500502062available from December
The CS-16DS low-profile servo brings compact dimensions and fast control to RC installations where every millimetre matters. With a housing size of 40.5 x 20.5 x 28 mm and a weight of 47 g, it suits flat chassis layouts that need a shorter servo height without giving away steering performance. Its operating range of 6 to 8.4 V gives flexibility across common RC electronics setups, while the waterproof housing supports running in wet conditions where splashes and damp surfaces are part of the session. The 2 ball bearings support the output shaft through repeated steering movement, and the 25-tooth output gearing provides a defined interface for compatible servo hardware. A servo horn set is included, and the JR plug system supports straightforward connection in many RC model layouts. In touring cars, drift cars and other compact RC builds, the low-profile format leaves more room around the chassis top deck and steering assembly. The combination of 15.6 kg.cm torque at 8.4 V, 0.09 sec per 60° speed and a metal gearbox suits quick direction changes, tight line corrections and controlled input through technical sections.
RC servos
CS-20DS Standard Size Servo, RC servo, waterproof
500502060available from December
The CS-20DS standard size servo brings fast actuation and high control force to RC models that need a serious steering or throttle component. With a voltage range of 6 to 8.4 V, 25 kg/cm torque at 8.4 V and a transit speed of 0.10 sec per 60°, it suits builds where quick response and firm holding power matter on the track or over rough ground. Its internal layout combines a core motor with a metal gear train and 2 ball bearings, a setup aimed at accurate movement under repeated load. The housing measures 40.5 x 20.2 x 38 mm and weighs 62 g, making the servo a regular-size format that fits many common RC installations without oversized packaging around the mechanism. The 25-tooth output gearing provides a defined interface for linkage setup, and the included servo horn set supports installation work straight into the model. Waterproof construction expands the range of running conditions to wet surfaces and rainy sessions where exposed electronics need added protection. In off-road chassis, touring cars and upgrade projects, the CS-20DS can take on steering duties where fast centring and strong torque shape the handling feel. It also suits kit-based model builds that call for a standard size servo with JR connection and clearly stated electrical and mechanical data.
RC servos
CS-46DS Servo, RC servo, standard size, waterproof
500502066available from December
The CS-46DS brings high steering force into a standard size servo format, combining 46.9 kg.cm actuating torque at 7.4 V with a coreless motor for strong, immediate control in demanding RC builds. Its black, blue and silver housing adds a technical look that suits off-road trucks, crawlers and other heavy-duty model setups. Inside the 40.5 x 20.5 x 36 mm case, a metal gearbox and 2 ball bearings support the drive train where steering loads rise under grip, weight transfer and uneven terrain. The 73 g servo format gives builders a clear reference for chassis layout and linkage geometry when planning an upgrade or a fresh installation. The JR plug system supports straightforward connection in compatible RC electronics layouts, and the included servo horn set adds the hardware needed for fitting the servo into the steering assembly. Minimum age: 14 years. In use, the CS-46DS suits models that need firm steering authority when tyres bite into loose ground, climb over obstacles or track through wet sections. Waterproof construction keeps the servo ready for runs in mud, water or snow, where stable steering input matters as much as raw force.
RC servos
CS-46DS-BL servo, RC servo, standard size
500502067available from December
The CS-46DS-BL brings brushless servo power into RC setups that need strong steering authority and fast response. With 47.8 kg.cm torque at 7.4 V, a metal gearbox and a 0.10 sec per 60° transit time, this standard-size servo is built for demanding model applications where control has to stay direct under load. Its 40.5 x 20.5 x 36 mm format follows the common RC standard size, making the servo a practical choice for many existing chassis layouts that use the JR plug system. The brushless motor is paired with 2 ball bearings to support smooth output shaft movement, while the waterproof construction keeps the servo usable when the route includes rain, puddles or mud. At 71 g, the unit combines substantial drive strength with dimensions that fit established installation spaces in many RC vehicles. The specification suits heavy 1:8 off-road trucks, large crawlers and competition-focused builds where steering precision matters on rough ground and during quick corrections. A servo horn set is supplied for installation. For operation, a compatible RC model and power setup are required separately.
RC servos
CS-6DS Standard Servo, RC accessory, waterproof
500502057available from December
The CS-6DS standard-size servo brings compact control hardware to RC model setups with a waterproof housing, metal gears and a core motor in a 40.5 x 20.2 x 40.3 mm format. At 6 V it delivers 7.5 kg/cm torque and a transit speed of 0.11 sec per 60°, giving steering and other control functions clearly stated performance data for hobby builds. Its 55 g weight helps place the unit precisely within the chassis layout, while 2 ball bearings support smooth shaft movement under repeated input changes. The 25-tooth output gearing defines the spline format for matching linkage hardware, and the JR connection identifies the plug standard for compatible radio installations. A servo horn set is included, so the essential mounting interface is already part of the contents. The voltage range of 4.8 to 6 V gives the servo a clear operating window for common RC electronics. In a touring car, buggy, crawler or boat conversion, the CS-6DS suits builds that need a standard-format servo with stated torque, speed and connection details before installation begins. The waterproof design also makes it a practical choice for model applications where moisture resistance matters alongside precise control response.
RC servos
Servo CS-15DS, digital RC servo, standard size
500502059available from December
The CS-15DS brings digital servo control, 15.32 kg/cm actuating torque at 6V and a standard-size 40.5 x 20.2 x 38 mm format into one compact RC component for precise chassis setup. In 1:10 and 1:8 models, that combination suits steering systems that need a strong, fast servo with a clearly defined installation size. Its 4.8-6V voltage range gives flexibility across common RC electronics layouts, while the core motor and 2 ball bearings support controlled movement through repeated steering inputs. The 25-tooth output gearing provides a defined interface for matching servo hardware, and the 62 g weight adds another concrete planning point when balancing the vehicle layout. The black-blue housing keeps the look technical and clean inside the chassis. With age marking 14 Years, the servo sits in the hobby-focused end of the RC range. Waterproof construction makes the servo suitable for running sessions where wet ground, spray or puddles are part of the route. In off-road builds, touring cars or other RC conversions that use a standard-size servo bay, the CS-15DS fits as a focused upgrade or replacement component for direct control input.
RC servos
Servo CS-30DS, RC servo, standard size waterproof
500502061available from December
The CS-30DS brings high steering force into a standard-size servo format, combining 34.6 kg.cm at 8.4 V with a fast 0.13 sec per 60° transit speed for RC models that need both authority and direct response. Its 40.5 x 20.2 x 40.3 mm housing and 62 g weight fit the familiar standard servo class used across many hobby platforms. Inside, a core motor drives a metal gearbox built for high-load operation, and 2 ball bearings support the drivetrain for controlled, low-friction movement. The 25-tooth output gearing provides a defined interface for servo arms and steering linkages, making the unit a strong match for demanding steering tasks rather than light-duty trim functions. Waterproof construction expands the range of running conditions where the servo can stay in service, from damp tracks to off-road terrain with spray and mud. The included servo horn set adds the mounting hardware needed for setup with JR-compatible systems. In a crawler, monster truck or larger off-road chassis, the CS-30DS suits steering assemblies that place real load on the servo saver and linkage. 14 Years marks the recommended age. For hobby work, the combination of standard dimensions, strong torque and quick transit speed makes it a focused upgrade for models that need firmer steering authority.
RC servos
Servo CS-3DS, standard servo, waterproof
500502055available from December
The Servo CS-3DS brings standard-size dimensions, JR connection and waterproof construction into one control component for RC model builds that need a compact, clearly specified servo. With a voltage range of 4.8-6 V, it suits common receiver power setups while keeping the installation focused on a familiar standard format. Its core motor is paired with plastic gears and a 25-tooth output gearing, giving the linkage a defined interface for compatible servo horns and steering assemblies. The listed performance figures of 5.6 kg/cm torque at 6 V and 0.12 sec per 60° at 6 V place the emphasis on quick, controlled movement rather than vague performance claims. Ball bearings are not fitted, and the specification states this plainly for builders comparing component layouts and running requirements. A servo horn set is included, so the control arm hardware is already part of the package. In a touring car, buggy, crawler or boat project, the 40.5 x 20.2 x 37.15 mm housing and 45.5 g weight give concrete reference points for installation planning before the linkage is connected. The waterproof design also suits running sessions where spray, puddles or damp ground are part of the conditions rather than an exception.
RC servos
Servo CS-40DS-BL, RC servo, standard size
500502065available from December
The CS-40DS-BL brings brushless drive, 30 kg.cm actuating torque at 7.4 V and a 0.09 sec per 60° response into one RC servo built for precise control under load. Its black-blue housing, standard JR format and waterproof construction suit demanding running conditions where steering accuracy needs to stay sharp through mud, puddles and rain. Inside, the brushless motor works with a metal gearbox to convert control inputs into strong, direct servo movement. The 2 ball bearings support the output shaft for smoother operation when the linkage is under pressure. With dimensions of 40 x 20 x 29.95 mm and a weight of 66 g, the servo stays within a familiar standard-size format that fits many RC installations. The designation JR/MG/WP/0.11 also points clearly to its standard connection format, metal gear layout and waterproof build. The specification suits RC applications that call for strong steering force and quick correction, including heavier off-road models, crawlers and large trucks where the servo works hard through uneven terrain. In workshop upgrades as well as fresh builds, the CS-40DS-BL adds a focused combination of speed, torque and compact installation dimensions for 14 Years and up.
RC servos
Servo CS-6DS, RC servo, standard size, waterproof
500502056available from December
The CS-6DS brings standard-size servo format, waterproof construction and digital RC control into a compact unit for model setups that need quick, defined movement. With dimensions of 40.5 x 20.2 x 37.15 mm and a weight of 48.5 g, it fits the familiar regular-size class used across many RC applications. Its operating range covers 4.8 to 6 V, giving flexibility for common receiver power systems. At 6 V, the servo reaches 0.12 sec per 60° and 7.0 kg/cm actuating torque, pairing brisk travel with the force needed for linked control tasks. A core motor forms the drive basis, while the plastic gearbox transfers movement through 25-tooth output gearing. The JR connection supports straightforward integration where this plug standard is required. The set also includes a servo horn set for installation. In an RC car, boat or other model using a standard servo bay, the CS-6DS suits roles where clean command transfer and compact dimensions count. Waterproof construction supports use in conditions where moisture is part of the running environment, while the regular-size layout keeps planning around mounting space simple.
RC servos
Servo CS-9DS, RC servo, standard size digital
500502058available from December
The Servo CS-9DS brings digital control, standard-size dimensions and water-protected construction into one compact RC component for 14+ model-building projects. With a 40.5 x 20.2 x 38 mm housing and a weight of 55.6 g, it suits builds that need a clearly specified servo format without adding unnecessary bulk. At 6 V, the unit reaches 9.3 kg/cm actuating torque and a speed of 0.13 sec per 60°, combining firm movement with fast response for steering and other control tasks. The internal layout uses a metal gearbox, a core motor and 2 ball bearings, giving the mechanism a concrete technical basis rather than relying on a simple gear train alone. The 25-tooth output gearing also matters during setup, because it defines compatibility with the servo horn connection used in the linkage. In an RC car, boat or other model that accepts a standard-size servo, these figures support direct, controlled input when the radio command changes direction or position. The water-protected design adds flexibility for running conditions where splashes or wet surfaces are part of the session, while the compact footprint keeps the servo easy to place within a tightly planned chassis layout.
RC servos
CS-17 Servo, RC servo, waterproof metal gear
500502048soon available again
The CS-17 servo brings a waterproof layout, metal gears and a regular-size format into one compact control component for RC models. In steering systems and other linkage-driven functions, the output shaft moves the mounted horn through the receiver signal, turning electronic input into precise mechanical motion at the chassis. The housing uses a JR plug connection and a 3-wire lead for standard RC receiver hookup. The mounted horn fixes to the splined output shaft with a central screw, and the included cross horn and single-arm horn offer different linkage attachment points for setup changes. Rubber grommets support the mounting points during installation, helping isolate the servo where the chassis passes vibration into the mounting tabs. The short description identifies a 0,2 specification, while the data does not define the unit, so that figure is left unstated here. With its waterproof construction, the servo suits model use on damp ground, wet surfaces and outdoor tracks where exposed running conditions are part of the session. The regular-size case fits the common servo class used across many hobby applications, and the metal gear train makes it a practical choice wherever control inputs need to be transmitted reliably through repeated movement. Warning! Not suitable for children under 14 years.
RC servos
Digitalservo CS30- 30kg ballb./JR plug
500502053available in stores
Carson CS-30 digital servo (500502053) is a powerful, digital standard servo specially developed for demanding 1/10th and 1/8th scale models. Waterproof metal gearing and ball bearings ensure durability; it delivers 300 N-cm at 4.8-6 V and responds in 0.19 s. Compact (40×20×38 mm), 50 g, incl. servo horn set - ideal for wet and cold applications. Warning! Not suitable for children under 14 years.
RC servos
PDS-2503Response Servo LP
500502049only available from customer service
Carson KO Servo PDS-2503 Low Profile (500502049) is a compact powerhouse for 1:10 EP On-/Off-Road. With 7.4 kg/cm (72.55 Ncm) torque, 0.12 s/60° response time and 4.8-6.0 V operating voltage, it delivers precise directional stability. Reinforced plastic gearbox and housing, coreless motor, 41×31.8×21 mm, 39.9 g, 220 mm cable, FUT/UNI connector. Scope of delivery: servo, screw for rudder horn, 4 rubber grommets and instructions. Warning! Not suitable for children under 14 years.
RC servos
XS-Chassis 8kg Servo for 1:10 RC Models
500502068only available from customer service
The XS-Chassis 8 kg servo is a dedicated steering component for selected 1:10 CARSON XS-Chassis vehicles. It is specified for the model references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363, covering Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants named in the data. Used as the steering servo, this part converts control input into the front-wheel movement that guides the vehicle through turns and line corrections. The 8 kg rating gives the steering system a defined force value for compatible chassis maintenance or replacement work. Because the data identifies the servo for the XS-Chassis platform, the fit is tied to that chassis family rather than to a generic 1:10 application. The part is therefore suited to restoring the intended steering function on the listed models without guesswork about compatibility. In workshop use, the servo fits naturally into repair, upkeep or planned parts replacement on an existing RC vehicle from the named XS-Chassis range. The listed model references make it easier to match the part to the correct Stadium Fighter, Offroad Fighter Cage, Tekuro or Ryken version before installation.