RC motors & speed controllers
Full control and top performance: Carson RC motors and ESCs are precisely tuned for off-road, on-road, and crawler models. Clean power delivery and reliable response included. Learn more about the RC motors & speed controllers here.
RC combustion engines & glow plugs
1:10 BL Motor Dragster Turbo 2.0, motor
500906315€34.99
The 1:10 BL Motor Dragster Turbo 2.0 3200KV is a brushless drive unit created for electric RC vehicle projects with a clear focus on dragster-style power delivery. Its 3200KV specification points to a fast-revving motor character that suits straight-line acceleration setups and gives model-building enthusiasts a concrete tuning component for 1:10 platforms. As a standalone motor, this unit fits into workshop-based RC builds where the drive system is chosen part by part. The brushless layout makes it a relevant option for hobbyists comparing replacement motors or planning a fresh electric configuration around a defined KV value. The Turbo 2.0 naming gives the motor a distinct place within the range, while the 1:10 scale reference keeps the application tied to model car use rather than full-size electronics. No batteries are included. The age marking is 14 Years. On the bench, this motor suits rebuilds, performance-focused maintenance and targeted drivetrain changes in electric model cars. It also works well as a search-friendly option for enthusiasts narrowing a setup by scale, motor type and 3200KV specification before matching the rest of the electronics separately. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
1:10 Dragster Turbo 2.0, brushless set
500906312€59.99
The 1:10 Dragster Turbo 2.0 brushless set brings a matched drive upgrade to electric RC models with a 2000 kV sensorless motor and a 60 A electronic speed controller. This 2-part combination is built for hobby setups that need clear throttle delivery, compact installation and a defined power package in one box. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, making it a concrete fit option for many 1:10 chassis layouts where motor space and shaft size matter during planning. Its no-load speed reaches 15,170 RPM, while short-term output is rated at approx. 236 W for lively response when the drivetrain comes under load. The ESC adds 80 g, handles 60 A continuously and up to 360 A peak, and manages forward, brake and reverse functions through a sensorless brushless system. Power supply compatibility covers 2S LiPo and 6-cell NiMH packs, with a T-Plug connector already specified. This set suits rebuilds, replacement projects and performance-focused electronics swaps in 1:10 electric vehicles. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions, giving model-building enthusiasts a clearly defined basis for a fresh drive configuration. Warning! Not suitable for children under 14 years.
RC brushless motors
1:10 Dragster Turbo 2.0, brushless set
500906310€59.99
The 1:10 Dragster Turbo 2.0 brushless set brings a compact power package to RC vehicle builds with a sensorless 3200 kV motor and an electronic speed controller matched to hobby-grade running. In the chassis, the black finned motor layout and separate controller create a clean drive setup for fast acceleration and direct throttle response. The motor delivers a no-load speed of 24,420 RPM and approx. 390 W short-term output, with 53 A continuous current for sustained running. Its dimensions of 35.8 x 50 mm and a shaft diameter of 3.175 mm provide concrete fitting data for compatible installations, while the motor weight of 148 g and ESC weight of 80 g help when planning the balance of a 1:10 model. The controller is designed for 7.4 V operation and works with 2S LiPo or 6-cell NiMH battery packs. Forward, brake and reverse functions are built into the ESC, and the T-Plug connector forms part of the power connection. This set suits RC car projects that need a coordinated motor and controller combination rather than separate component sourcing. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
1:10 Dragster Turbo 2.0, motor, 2600KV
500906314€34.99
The 1:10 BL Motor Dragster Turbo 2.0 2600KV is a brushless drive component for electric model vehicle setups, centered on a 2600KV motor specification and a format matched to 1:10 applications. As a dedicated replacement or upgrade part, it brings the drive system back into service with a clearly defined motor unit for workshop benches, rebuilds and running repairs. Within a powered vehicle setup, the motor sits at the heart of the drivetrain, making the KV rating a key reference point when matching the unit to the existing electronics and the intended running character. The product data identifies this version specifically as the Dragster Turbo 2.0 motor, which keeps the designation clear when replacing a worn unit or sourcing the correct spare for an existing model. Because this is a component rather than a complete vehicle, the focus stays on fit within an electric model system and on the practical value of having the correct motor type ready for maintenance. The 14 Years age marking is stated in the product data. On the workbench, this kind of motor suits planned repairs, drive refreshes and parts-led tuning sessions where a named 1:10 brushless unit is the required starting point for getting a model back on track. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
540 Pro 13T-BB, electric motor, 6 V RC drive
500906322€18.99
The 540 Pro 13T-BB electric motor is a brushed RC drive unit built for model vehicle projects that need a clearly defined performance setup. With 13 turns, a nominal voltage of 6 V and an operating range from 4.8 to 8.4 V, it fits tuning, replacement and workshop builds where the electrical data matters as much as the fit. The attached cable adds a practical connection detail straight from the pack. Its technical profile centres on 32,000 rpm, 35 N mm torque, 99 W output and 5.3 amps current consumption. That combination suits hobbyists comparing drive characteristics across compatible RC electronics rather than choosing by size alone. The 540 can format is a familiar reference point in many model vehicle platforms, and the BB designation marks this version as a ball bearing motor. For workshop planning, the stated voltage window helps match the motor to an existing setup without guesswork. In use, this motor suits replacement jobs on worn brushed drives, fresh tuning builds and spare-parts boxes for regular track or car park sessions. The compact 540 format and included cable keep the focus on fitting the motor into a compatible RC chassis and getting the drivetrain back into action. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
540 Pro 17T-BB, electric motor, 6 V brushed
500906323€18.99
The 540 Pro 17T-BB electric motor brings classic brushed drive character to RC vehicle builds with a 540 size format, 17 turns and a measured output of 69 W. At 24,500 rpm, the motor delivers a lively power curve that suits hobby setups looking for a defined balance of speed and control rather than an undefined all-round unit. Its nominal voltage is 6 V, while the stated operating range of 4.8 to 8.4 V leaves room for different electronics configurations within the same build plan. Current consumption is listed at 3.5 amps, and the 32 N mm torque figure gives a concrete reference for how the motor translates electrical input into rotational force at the shaft. The BB designation points to ball bearing support, a detail valued in model-building circles for smooth running in a compact drive component. Included cable simplifies the connection step and keeps the motor ready for fitting into a compatible RC chassis. With an age marking of 14 years, this motor fits enthusiast-oriented RC projects where component choice shapes the final driving character. It works well in workshop-style upgrade sessions, replacement builds or fresh vehicle assemblies where a 540 brushed motor with 17 turns is the required drive unit. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
540 Pro 21T-BB, electric motor, 6 V 60 W
500906324€18.99
The 540 Pro 21T-BB electric motor brings classic brushed drive technology to RC model builds in a compact 540 size format. With 21 turns, a 6 V nominal voltage and a stated output of 60 W, it gives hobby projects a clearly defined motor option for drivetrain installations where size, power and electrical data all need to line up. Its operating range spans 4.8 to 8.4 V, making the motor suitable for different compatible power configurations within that window. The stated speed of 19,000 rpm and current consumption of 2.7 amps provide concrete figures for planning the drive package around the motor's characteristics. A torque rating of 30 N mm adds another useful reference point when matching the motor to gearing, transmission parts and the intended running style of the model. The included cable supports straightforward integration into the vehicle's electrical layout. In workshop use, this motor suits enthusiasts comparing voltage, rpm, torque and turns before choosing a brushed setup for a compatible RC vehicle. It also works well as a replacement or upgrade path when an existing 540 format installation calls for a motor with clearly specified electrical and performance values. Warning! Not suitable for children under 14 years.
RC brushed motors
550 Brushed Motor, XS-Chassis spare motor
500906107€19.99
The 550 brushed motor brings a direct replacement drive unit to the Carson XS-Chassis 1:10 range, with a can-style DC layout, output shaft and top electrical terminals that suit classic hobby vehicle drivetrain setups. Built as a cable-free spare motor, it leaves the connection points open for the required installation work on the matching chassis. Compatibility is stated for Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. That covers Stadium Fighter in blue and orange, Offroad Fighter Cage in turquoise and red, Tekuro in grey green and grey blue, plus Ryken in blue and green. The 550 size makes this motor a defined replacement choice when an existing drive unit needs to be exchanged within that platform. The brushed setup also suits hobbyists who prefer straightforward maintenance on established RC vehicle systems. In workshop use, this spare motor fits naturally into repair, refresh and running maintenance on compatible 1:10 Carson vehicles. It supports drivetrain restoration after wear, or a like-for-like motor swap when one of the listed XS-Chassis models needs a fresh drive unit. Warning! Not suitable for children under 14 years.
RC brushless motors
Dragster Turbo 2.0, brushless set, 1:10
500906311€59.99
The Dragster Turbo 2.0 brushless set brings a matched drive upgrade to 1:10 RC models with a 2600 kV sensorless brushless motor and a 60 A waterproof ESC. With a no-load speed of 20,720 RPM and short-term output of about 310 W, the set is built for hobby setups that call for stronger acceleration and a more direct throttle feel. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, giving clear reference points for installation planning in suitable chassis. Its continuous current is 42 A. The ESC adds 80 g and is designed for 2S LiPo or 6-cell NiMH batteries at 7.4 V. A forward, brake and reverse function is integrated, and the controller handles 60 A continuous current with 360 A peak current. The T-Plug connector defines the battery-side connection, while the included switch module and receiver lead support standard RC wiring layouts. This set suits rebuilds, performance-focused replacements and fresh 1:10 projects where motor and controller need to work as a coordinated pair. A brushless motor, speed controller and instructions are included. A battery pack, charger and radio gear are required separately. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
Electric Motor 540 23T-BB, RC motor, 6 V
500906320€14.99
The 540 23T-BB electric motor brings classic brushed drive technology to compatible RC vehicle builds with a clearly defined 540 format, 23 turns and 50 W output. A nominal voltage of 6 V and a working range from 4.8 to 8.4 V give model-building enthusiasts concrete figures for planning a suitable drivetrain setup around the motor. Its 19,900 rpm speed, 2.2 amp current consumption and 29 N mm torque outline how this unit is positioned within an RC system: fast enough for responsive running, yet specific enough for considered replacement or tuning decisions. The included cable adds a practical installation detail straight from the box contents, while the single output shaft and compact cylindrical housing suit the familiar layout used in many powered model vehicle applications. As a standalone motor component, it fits naturally into workshop routines such as refreshing a worn drive unit or assembling a new compatible chassis. In use, this motor suits hobby bench setups where voltage, turns and output need to be matched carefully to the rest of the electronics. The 14 Years marking places it within the hobby-focused end of the range, making it a fitting choice for model vehicle enthusiasts working on maintenance, upgrades or fresh RC builds. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
Electric Motor 540 80T-BB, RC motor, 6 V
500906321€14.99
The 540 80T-BB electric motor brings classic brushed RC drive hardware into compatible vehicle builds with a 6 V nominal voltage, 80 turns and a measured output of 15 W. Its cylindrical 540 format, output shaft and attached cable create a straightforward basis for drivetrain installation where controlled delivery and clear mechanical feedback are part of the appeal. A voltage range of 4.8 to 8.4 V opens the motor to different matching electrical setups, while the stated current consumption of 0.7 amps adds a concrete reference point for planning the drive system. The rated speed of 5,900 rpm works alongside 130 Nmm torque, giving the motor a balance that suits applications where usable pull and steady response matter alongside rotation. The included cable is already fitted to the motor, so the connection side is present from the start. Age marking: 14 Years. In an RC workshop, this motor fits naturally into replacement projects, fresh chassis builds or drivetrain changes that call for a 540-size brushed unit. It also suits hobby setups where the focus lies on matching voltage, torque and rpm figures carefully to the rest of the running gear for a well-judged result. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
REFLEX-XS ESC/RX Unit, RC electronics for XS-Chassis
500906309€39.99
The REFLEX-XS ESC/RX unit is a dedicated electronics replacement for Carson XS-Chassis vehicles in 1:10 scale, combining ESC and receiver functions in one compact module. With its XT60 plug connection, it is set up for the stated chassis family and supports a clean return to the original control layout when an existing unit needs to be replaced. This spare part is assigned to the Carson XS-Chassis range under the references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The listed vehicles include Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants, which makes the unit a precise match for several models within the same platform. As an ESC/RX combination, it brings two core electronics functions together in one component, which helps keep the installation focused on the chassis system named in the data rather than on mixed standalone parts. Within workshop use, this unit suits repair, maintenance and platform-specific replacement work on compatible Carson models. The 14 years and up marking is stated in the product data, and the part sits in the model supplies area for hobby-oriented vehicle upkeep and running repairs.
RC combustion engines & glow plugs
Glow-plug Battery 1.2V 2000mAh Accessory
500905127€14.49
Nitro RC engines rely on a dependable ignition source, and this 1.2 V glow-plug battery is built for exactly that task. With a 2000 mAh capacity, it serves as a dedicated power unit for compatible glow igniters in model workshop and trackside use. As a models supplies accessory, the battery fits naturally into RC maintenance and running equipment where engine starting is part of the routine. The stated 1.2 V output defines the electrical specification clearly, while the 2000 mAh figure gives a concrete reference point for capacity when planning charging cycles and spare equipment. The compact format of this kind of accessory makes it easy to keep alongside other nitro starting gear without taking attention away from the main model itself. No batteries are included. Whether used as a replacement battery for existing glow-plug equipment or kept ready as a spare for longer driving days, this accessory supports the practical side of nitro model operation. The age marking is 14 years, placing it within hobby-focused RC use where technical accessories and engine preparation are a regular part of the session.
RC brushless motors
1:10 Dragster Turbo Program Card, ESC accessory
500906303€14.99
The 1:10 Dragster Turbo Program Card brings direct ESC setup control to the workbench, letting key drive parameters be changed through a compact wired unit instead of relying on menu-heavy programming steps. Its black housing, printed setting layout and BEC-style connection create a clear tuning tool for RC vehicle electronics. The card is designed to configure several core controller functions. Low-voltage shutdown can be set to 3.1 V, 2.9 V, 2.7 V or 0 V, while separate rows on the card cover acceleration, maximum braking force, maximum reverse force and response behaviour. Visible programme markings and status indicators on the face help keep each selected value easy to track during setup. Dedicated Programme and Reset controls support quick changes when testing different controller responses. Batteries are not included. In use, the card suits workshop tuning before a run as well as between sessions when a different brake balance, reverse setting or throttle reaction is needed. Age marking: 14 years. As an RC accessory for 1:10 applications, it adds a practical way to refine how an electric model reacts on the track or during general driving.
RC brushed motors
Electric Motor 540 23T-CB, RC motor
500906052€12.99
The 540 23T-CB Cup Machine brings classic brushed RC drive hardware into a compact motor format with clearly stated performance data for hobby bench planning and drivetrain matching. With a nominal voltage of 6 V, a usable voltage range from 4.8 V to 8.4 V and a peak rotational speed of 23,000 rpm, this motor suits projects where the drive setup needs to be chosen around known figures rather than guesswork. The cylindrical can design uses a front output shaft for connection to the drivetrain, while the attached red and black leads provide the power connection straight from the motor. At maximum efficiency, current consumption is 1.95 A with 61.1% efficiency. A second operating point is also specified with 16,400 rpm, 1.69 Ncm torque, 8.7 A current consumption and 28.8 W output, giving model-building enthusiasts several concrete values to compare when selecting gearing, electronics and running characteristics. On the workbench, these figures help frame a replacement build, a tuning change or a fresh RC vehicle setup with more confidence. In running use, the 540 format and defined voltage window make the motor a practical choice for hobby applications that need a brushed drive unit with stated electrical and mechanical data. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
Viper Micro Marine, speed controller, waterproof
500906137€40.99
The Viper Micro Marine speed controller brings compact electronic control to RC boat setups with a 26 x 25 x 9 mm format, 23 g weight with cable, and a fully waterproof design for marine running conditions. Its layout is built around direct installation, with wires already attached and an external on-off switch included on the harness. This controller is specified for 5 to 10 NiMH cells and an operating voltage of 6 to 12 V, making it suitable for a wide range of compact electric marine configurations. The motor limit of 10 Turn defines the drive range it is designed to handle, while the 1.0 KHz frequency and 1.5 A BEC output round out the technical package. Brake and adjustable braking point are not provided here; the focus stays on forward and reverse control with a simplified operating concept. All adjustments are handled through one setup button, keeping programming concentrated in a single control input. In use, that combination suits hulls where installation space is limited and wiring needs to stay orderly around battery, motor and receiver connections. The waterproof build, integrated control protections and compact dimensions make it a focused choice for electric marine models that need a small controller with clear setup logic.
RC combustion engines & glow plugs
Glow Plug Rossi R2, engine part, hot insert
500905006€7.49
The glow plug is one of the key working parts in a glow fuel model engine, and the Rossi R2 is specified here as a hot-rated version for model combustion setups. Its compact threaded metal form and rounded contact tip are made for fitting into the engine head, where this small component supports the ignition process during running. Alongside the plug, the set includes a copper sealing washer for the matching installation point. That gives the replacement part and its sealing component in one pack, which is useful when an existing plug has reached the end of its service life or when a fresh spare belongs in the pit box. The clearly stated R2 hot designation helps distinguish this version from other plug types when matching parts for maintenance. 14 Years is the stated age marking. In workshop use, this engine part fits naturally into regular servicing for RC combustion models, whether the task is replacing a worn insert, preparing spares before a running session, or keeping maintenance supplies organised with other engine hardware. The small format also makes it easy to store alongside other model engine essentials. Warning! Not suitable for children under 14 years.
RC combustion engines & glow plugs
Rossi R3 Glow Plug, engine part
500905007€8.49
The Rossi R3 glow plug is a compact engine part for model-building enthusiasts working with nitro-powered RC setups. Its threaded metal body screws into the engine head, while the included copper sealing washer sits at the seat to help create the required seal during installation. The marked medium heat range identifies the plug as an R3 specification for balanced running conditions in compatible model engines. As a service and replacement part, this glow plug belongs in the regular maintenance cycle of combustion-powered RC vehicles and other model engine applications that use this format. The contact tip and threaded section are shaped for direct fitting into the engine head, giving workshop routines a clearly defined spare for worn or spent plugs. In practical use, the plug supports the ignition process inside the engine, where the heated element works with the fuel mixture during starting and running. Whether the task is routine upkeep, replacing a used plug before the next session or stocking core workshop spares, the Rossi R3 adds a concrete engine consumable to the bench. Age marking: 14 Years. The set includes the glow plug and 1 copper washer. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
Speed Controller Dragster Brushed 70A, ESC
500906264€32.99
The Speed Controller Dragster Brushed 70A brings precise throttle control to brushed RC setups in a compact 34.5 x 30.2 x 18.7 mm format with a weight of 39 g. Its splash-proof design and dust-proof housing broaden installation options beyond land vehicles, including boat applications where moisture resistance matters. This electronic speed controller is built for brushed 540 and 550 motors at 18T or below 30000 rpm at 7.2V, giving model builders a clear technical match for common 1:10 platforms. Forward current is rated at 70A continuous and 360A peak, while reverse reaches 40A continuous and 180A peak. Automatic throttle calibration simplifies setup, and the integrated capacitor supports stable operation. Battery type and drive mode are selected by jumper pin, with settings for LiPo or NiMH and operating profiles for Boat, F/B/R and Crawler. An integrated on/off switch and receiver lead complete the wiring layout between battery, motor and receiver. Included are the Dragster Brushed 70A speed controller and a Tamiya/T-plug adapter. For installation and operation, radio gear, a battery pack and a charger are required separately. In a buggy, crawler or boat, the controller gives brushed power systems a defined, configurable control centre for varied terrain and driving styles.
RC brushless motors
1:10 Dragster Turbo 4370KV, brushless set
500906301€69.99
The 1:10 Dragster Turbo 4370KV brushless set brings a matched sensorless drive package to RC car builds that call for sharp acceleration and high top-end speed. The combination of an 8T brushless motor and a waterproof electronic speed controller is designed for 1:10 applications, with the motor rated at 4370KV and up to 488W for fast-revving on-road setups and hard-charging off-road runs on suitable battery combinations. The controller is specified for 60A continuous current and 360A peak current, with 0.0007 Ohm resistance, 2A/5V BEC output, dimensions of 51 x 36 x 36 mm and a weight of 80 g. Programming is possible via Program-Card 500906303. The motor uses a 4-pole layout, supports up to 12V, draws up to 66A with a minimum current of 3.2A, and measures 35.8 x 50 mm at 148 g. A 3.175 mm motor shaft with 15 mm shaft length and 4 mm gold connectors completes the hardware package for clean installation in compatible chassis. For running setups, 2S LiPo and 6-cell NiMH are specified for on-road and off-road use, while 3S LiPo and 9-cell NiMH are specified for on-road use only. Wet and damp conditions such as rain and puddles are supported, but the vehicle and components must not be submerged under water. The set includes the brushless motor, brushless controller and instructions.
RC combustion engines & glow plugs
Glow Plug R1, engine accessory, extra hot
500905020€6.79
The glow plug is the ignition point at the heart of a nitro model engine, and this R1 version is specified as extra hot for setups that call for a very hot heat range. Its ultrashort format keeps the part compact, making it suited to engine heads and surrounding layouts where space is limited. As a replacement engine accessory, the plug is designed to thread into the engine head and ignite the fuel mixture during running. The included sealing washer sits between the plug and the engine head to support correct seating at installation. The metal plug body and compact threaded form place it firmly in the technical side of model maintenance, where the right spare part matters for consistent running and service work. The product data states an age marking of 14 years. This kind of component fits naturally into workshop routines such as replacing a worn plug, refreshing an engine before the next run, or keeping a spare in the pit box for tuning changes. In hobby use, a clearly specified R1 extra hot plug gives model enthusiasts a concrete option when an engine setup calls for this heat rating. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
ESC tio Marine 30, brushed marine speed controller
500906291€51.99
Built for RC boat use, the tio Marine 30 is a brushed marine speed controller that combines 6 to 12 V operation with a 30 A motor limit for DC brushed motors. Its fully waterproof design suits running conditions where spray, splashes and wet decks are part of the setup, while the compact controller body connects battery and motor through clearly marked positive and negative leads. The control system uses 4 quadrant operation, so the motor stops completely before changing into the opposite direction. That sequence creates balanced response around the neutral position and supports precise manoeuvring at low speed. Reverse can also be switched on or off, allowing either forward and reverse running or a forward-only mode with brake function. Programming and calibration are handled through the set button and LED signals, with separate indications for neutral, forward, reverse, battery selection and failsafe mode. The controller is compatible with LiPo as well as NiCAD, NiMH and lead acid battery packs. In a model boat, that mix of directional control and battery flexibility suits everything from careful harbour-style manoeuvres to steady throttle changes on open water. When signal loss occurs, the built-in failsafe returns the controller to neutral, and the added protection functions help manage motor stall, short circuit and overheating during demanding sessions.
RC electric motors & controllers
Viper Auto Sport 20, speed controller, waterproof
500906134€41.99
The Viper Auto Sport 20 speed controller brings waterproof electronic motor control to brushed RC model setups in a compact 40 x 35 x 12 mm format. With forward, reverse and brake functions, it gives the drivetrain clear throttle response while the 54 g weight with cable keeps the unit easy to place in tighter chassis layouts. Programming is handled through 1 setup button, so the controller can be configured without a complex menu structure. The stated 20 Turn motor limit defines its intended brushed motor range, and NiMH compatibility with 4 to 8 cells at 4.8 to 9.6 V covers common hobby configurations. An integrated fail safe is built in as a concrete control feature, and the electronics also include short-circuit protection, overload protection, an on off switch and complete wiring. The listed 3.3 k frequency and 1.5 A BEC output add further technical detail for model builders comparing drive components. In a touring car, buggy or other electric RC vehicle, the compact case and attached leads support tidy routing between battery, motor and receiver. Wet track sessions, club running and general hobby use all benefit from a controller that combines waterproof construction, direct setup and clearly stated electrical limits.
RC electric motors & controllers
Viper Marine 25, speed controller, 6-12V ESC
500906261€52.99
The Viper Marine 25 speed controller is designed for RC boat setups that need compact electronic control with marine-focused protection. Its 100% waterproof construction, 25 A current limit and input range of 6.0-12.0 V/DC give this ESC a clear place in electric model boating, where wet running conditions and dependable throttle response matter at the same time. A 1 kHz drive frequency shapes the motor control, while the onboard 1.5 A BEC supports the connected radio system from the controller itself. Forward and reverse are both available, and the reverse function can also be adjusted or disabled to suit the layout and handling style of the model. All adjustments run through a single set up button, keeping configuration direct on the bench before the hull goes back on the water. Integrated fail safe, motor short protection and overload protection add concrete electronic safeguards, and the included wires plus on-off switch support clean installation into the boat. In use, the controller suits electric marine models that need a compact ESC between battery, motor and radio gear. Whether fitted into a sport hull or a scale boat, the 6-12 V/DC operating range and marine-specific protection features support controlled running across repeated sessions on the water. Warning! Not suitable for children under 14 years.
RC brushless motors
1:10 Dragster Turbo, brushless set, 3300KV
500906302€69.99
Built for fast 1:10 RC setups, the Dragster Turbo brushless set pairs an 8T sensorless 3300KV motor with a 60A controller for strong launch force, high efficiency and the kind of top-end pace that suits both on-road and off-road driving. The combination is designed for 2S, 3S and NiMH 6 to 9 cell battery formats, opening up different power layouts within one drive package. The controller measures 51 x 36 x 36 mm, weighs 80 g and is specified for 60A continuous current with 360A peak current, a 2A/5V BEC and 0.0007 Ohm resistance. Programming is possible via Program-Card 500906303. The motor measures 35.8 x 50 mm, weighs 148 g and is rated at max. 350W with up to 17V, max. 47A and min. 2.6A. Its 4-pole layout, 4 mm gold connectors, 3.175 mm shaft diameter and 15 mm shaft length give model-building enthusiasts concrete data for matching the set to an existing chassis and drivetrain. Wet and damp running conditions such as rain and puddles are supported, but the vehicle and components must not be submerged under water. The set includes the brushless motor, brushless controller and instructions, making it a focused upgrade choice for hobbyists tuning acceleration, response and speed in electric RC cars.
RC brushed motors
540 80T-CB Truck Machine, electric motor
500906023€13.49
Built for RC truck applications, the 540 80T-CB Truck Machine combines a brushed motor layout with 6500 rpm and 165 Nmm output for a drive character that favours controlled torque delivery over aggressive top-end running. The 4.8 to 8.4 V operating range gives the motor a clear place in many hobby-grade vehicle setups. Inside the can, the 80T configuration shapes the motor for measured response in pulling and load-focused use. Sintered self-lubricating bearings support the shaft and reduce service effort, which matters when a drivetrain sees repeated running sessions and regular workshop attention. The motor is also equipped as standard with a motor cable and anti-interference circuitry, so the electrical side is already prepared for integration into a compatible RC chassis. As a single electric motor component, it suits replacements, upgrades, or fresh builds where the drive system needs a defined brushed setup. In a scale truck project, this motor fits the kind of running that calls for steady launch behaviour, controlled throttle pickup, and dependable power transfer through the drivetrain. It also works well in bench-planned hobby builds where voltage range, winding type, and output figures are chosen with the rest of the transmission in mind. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
ESC Viper Sub 10, speed controller, 6-12V
500906294€49.99
Built for RC submarine setups, the Viper Sub 10 is a brushed speed controller that combines 6-12V operation with a 40A motor limit for DC brushed motors under load. The fully waterproof design suits running conditions where electronics work below the surface and around constant spray, wiring and propulsion demands. A one-touch setup routine calibrates the controller to the radio system through the onboard button and LED sequence, setting neutral, full forward and full reverse positions. The unit also adds programmable reverse functions for more precise control of manoeuvres in confined water spaces. A high-power 3A BEC provides regulated 5.0V output for additional onboard functions that need a stable supply, going beyond the standard Viper Marine specification mentioned in the data. Built-in failsafe, motor short circuit protection and thermal overload protection add concrete electronic safeguards during operation. In a scale submarine build, these features support steady throttle control during launch, submerged cruising and low-speed direction changes near obstacles or weed. The compact controller format with clearly marked battery and motor connections also fits the technical character of dedicated RC boat and submarine installations.
RC combustion engines & glow plugs
Glow Plug Rossi R5, model engine spare part
500905009€10.99
Glow-powered model engines rely on a precisely matched ignition component, and the Rossi R5 is built for that role as a dedicated glow plug spare part. The visible R5 designation and very cold heat range point to use in tuned combustion-engine setups where engine temperature, fuel choice and running conditions call for a colder plug characteristic. The metal glow plug uses a threaded body for fitting into the engine head, and the separate copper washer sits beneath the plug at the seat. That combination gives the engine the installed contact point and the sealing ring required for correct fitment at this specific location. As a compact replacement part, it belongs in the maintenance cycle of glow-fuel RC vehicles and other model-engine applications that use this type of ignition system. The rounded contact tip and threaded section identify it clearly as an engine component rather than a general workshop accessory. In practical use, the Rossi R5 suits bench servicing, routine replacement after engine wear, or tuning changes within a glow-engine setup. The 14 years age marking is stated for this spare part category, and the compact format makes it easy to keep alongside other workshop essentials for model-engine running sessions. Warning! Not suitable for children under 14 years.
RC combustion engines & glow plugs
Glow Plug Rossi R6, engine part, cold plug
500905010€13.99
The glow engine remains a defining part of nitro RC driving, and the Rossi R6 brings that workshop detail down to one compact engine component. This cold-rated glow plug uses a threaded metal body, a contact tip for the glow igniter and a separate copper sealing washer for installation in the engine head. As a replacement part, the R6 supports the ignition process in model combustion engines by heating at the plug tip during starting. The copper washer sits beneath the plug to seal the seating surface at the cylinder head. Its compact format makes it easy to keep as a spare in a pit box alongside other engine service parts. The clearly designated R6 version also helps hobbyists match the required plug type during routine maintenance, engine refreshes or tuning-related replacement. In practical use, this kind of engine part belongs in the regular service cycle of nitro-powered RC models, whether the session involves track running, test starts after storage or preparation before the next fuel fill. Radio gear, a battery pack, a charger and paints are required separately. Warning! Not suitable for children under 14 years.
RC combustion engines & glow plugs
Glow Plug Rossi R7, glow plug, cold range
500905011€14.49
The Glow Plug Rossi R7 brings a core engine service part into model workshop routines with a cold heat range specification and a compact threaded format made for model combustion engines. The metal plug body, hex section and top contact point give this spare part the exact functional shape needed for installation and ignition within a nitro engine setup. During maintenance, the threaded section seats the plug in the engine head while the copper sealing washer closes the joint at the mounting point. This combination supports a clean replacement process when an existing plug is worn or when engine tuning calls for the R7 cold specification. The separate washer is part of the fitted assembly and belongs directly to the plug's sealing function rather than to packaging or storage. The clearly defined component format also makes it easy to identify within a spares box for regular workshop use. In RC and model engine care, a replacement glow plug belongs among the small parts that keep running sessions on schedule. The Rossi R7 suits bench servicing, trackside maintenance and planned engine refresh work where the required cold range is already part of the setup. Age marking: 14 years. Warning! Not suitable for children under 14 years.
RC brushed motors
Launcher 2.0 Race 12T Motor, RC motor
500906280€25.99
The Launcher 2.0 Race 12T Motor brings high-revving brushed drive power into RC racing builds with 32,500 rpm at 7.2 V and a short-time output of about 160 watts. Its black cylindrical housing, visible brush assembly and pre-fitted red and black wires underline the focused layout of a motor built for direct installation in compatible model drivetrains. With dimensions of 35 x 70 mm, the motor fits a compact performance format that suits many hobby workshop setups where space and component matching matter. The 3.175 mm shaft forms the mechanical connection point for the pinion gear, so rotational force passes straight into the transmission once installed. A weight of 164 g gives a clear planning value when balancing drivetrain components and overall vehicle setup. The brushed construction also makes the motor a relevant choice for enthusiasts working with classic race-oriented electric systems. In running sessions, the fast-revving character suits track-focused RC models that rely on crisp response and strong pull out of corners. The technical figures also make the motor a useful option for rebuilds, replacements or performance-led tuning projects where exact dimensions, shaft size and voltage reference need to match the existing setup.
RC combustion engines & glow plugs
Rossi 4-Stroke Glow Plug for Model Engines
500905017€13.99
The Rossi 4-Stroke glow plug is a dedicated replacement part for model engine setups that use a 4-stroke configuration. Its clearly named application keeps workshop selection straightforward when a compatible engine needs a fresh ignition component for maintenance, servicing or planned spares. Within model supplies, a glow plug is one of the small but essential engine parts that belongs in a well-prepared RC tool kit. This version is identified specifically as a Rossi 4-Stroke type, which helps separate it from other plug variants intended for different heat ranges or engine layouts. The compact threaded metal component is easy to store alongside other workshop essentials and suits hobby benches, pit boxes and field repair kits where quick access to the correct spare matters. The product data places it in Models & Accessories and Models Supplies, aligning it with ongoing engine care rather than a one-time build step. The stated age marking is 14 Years. That fits the hands-on context of model engine maintenance, where replacement parts, tuning work and regular servicing are part of the hobby routine around RC models and their running gear. Warning! Not suitable for children under 14 years.
RC combustion engines & glow plugs
Rossi R8 Glow Plug, engine accessory, extra cold
500905012€16.49
High-compression nitro engines place heavy demands on ignition parts, and the Rossi R8 glow plug is specified for exactly that kind of setup. This extra cold glow plug is designed for high-performance motors and for fuel with more than 22% nitro, giving hobbyists a clearly defined heat range for engines that run under demanding conditions. The glow plug uses a high-quality platinum coil, a key component in the ignition process inside a model engine. Its threaded metal body fits as a service and tuning part, while the separate copper washer supports a sealed installation at the cylinder head. Rather than acting as a general-purpose spare, the R8 is aimed at setups where compression, fuel blend and plug temperature need to work together. That makes it a useful choice for planned maintenance, engine refreshes and heat-range changes within a nitro tuning routine. On the bench, the Rossi R8 suits replacement work on RC model engines that need an extra cold specification. In running setups built around high nitro content, it gives enthusiasts a dedicated plug option for keeping the ignition system matched to the engine's demands. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
Sirius Max 2 ESC, speed controller, digital setup
500906174€54.99
The Sirius Max 2 ESC brings compact speed control and clear setup logic to electric RC vehicle builds. Its digital 1-touch calibration uses the SET button and red, green and blue LEDs to store neutral, full forward and full brake or reverse positions, creating a direct link between transmitter input and motor response. With an input range of 4.8 to 12.0 V, the controller works with 4 to 10 NiCd or NiMH cells and with 2S to 3S LiPo packs from 7.4 to 11.1 V. The integrated battery type selection switches between automatic NiCd or NiMH cutoff and automatic LiPo cutoff before power-up, and the blue LED stays lit in LiPo mode. A 2.0 kHz frequency and 1.5 A BEC current support the electrical layout, while the compact housing measures 40 x 36 x 12 mm and weighs 54 g including wires. Factory-fitted leads connect battery, motor, switch and receiver, with color coding shown as black for battery negative, red for battery positive, blue for motor negative and yellow for motor positive. In use, the controller suits hobby builds that need clear installation feedback and adaptable drive behavior. Failsafe mode signals with a flashing red LED and returns the controller to neutral when receiver signal is lost or incorrect, helping maintain controlled response during running sessions. Age 14 Years. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
tio Marine 15, speed controller, brushed 6-12V
500906290€41.99
The tio Marine 15 brushed speed controller is built for RC boat installations that need compact motor control, waterproof construction and support for 6-12V operation. Designed for brushed DC motors up to a 15A load, it brings measured throttle response to marine setups where steady low-speed input and clean reversing behaviour matter on the water. Its control system uses 4-quadrant operation, so the motor stops fully before changing direction. That sequence creates balanced response around the neutral point and supports careful handling during docking, tight turns or slow approach work. The controller is programmable through the set button, with reverse selectable as on or off to suit either forward and reverse running or forward-only use. Battery compatibility covers LiPo as well as NiCAD, NiMH and lead acid packs, giving broad scope for different boat electrics. LED indications support setup and status checks, including calibration, battery mode and failsafe status. In a typical installation, the controller links battery, receiver and motor through clearly assigned positive and negative leads, making it a focused choice for brushed marine drive systems. Built-in failsafe returns the controller to neutral on signal loss, while motor short circuit protection and thermal overload protection support reliable running when load conditions become demanding.
RC electric motors & controllers
tio Storm X NoLimit speed controller, ESC
500906132€58.99
The tio Storm X NoLimit speed controller brings compact RC power management into a 40 x 35 x 12 mm format with a weight of 55 g including cable. Its waterproof design, integrated fail safe and built-in protection functions make it a focused electronics upgrade for model layouts that need dependable throttle control, braking and reverse handling. Calibration works through a single setup button and an LED-guided sequence rather than a bank of separate adjustments. The controller supports forward, brake and reverse, with reverse able to be switched off when a brake-only setup suits the model better. NiMH and LiPo battery types are supported across 4 to 8 cells and 4.8 to 9.6 V, while the 3.3 kHz drive frequency and 1.5 A BEC round out the technical package. Short-circuit protection and overload protection are built in, and the unit comes complete with wires plus an on off switch. In an RC car or similar electric model, the small footprint leaves more freedom when placing the electronics around the receiver, battery pack and motor. The neutral return in failsafe mode and the option to disable reverse give hobbyists clear control over how the model responds on the bench and out on the track. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
Viper Truck Twin 27T/15T, speed controller
500906135€62.99
The Viper Truck Twin 27T/15T speed controller brings compact brushed-motor control to electric RC models with a 40 x 35 x 12 mm housing and a weight of 53 g including cable. Its waterproof construction and integrated wiring suit installations where space is limited and the electronics need a clean, self-contained layout inside the chassis. The controller is designed for NiMH battery packs with 5 to 10 cells and an input range of 6 to 12 V. A 15 Turn motor limit defines the drive range for compatible brushed setups, while a 3.0 A BEC supports receiver power supply. The operating sequence covers forward, brake and reverse, and the reverse function can be switched off when a model is set up for running without it. Setup is handled through a single button on the ESC, keeping the programming process focused on the controller itself rather than a separate programming unit. In use, the Viper Truck Twin 27T/15T fits RC truck and car builds that need compact dimensions, direct setup access and clearly defined drive functions. Complete wiring and an on-off switch support straightforward integration into a model, whether the controller is being installed in a fresh build or replacing an existing ESC in an established chassis. Warning! Not suitable for children under 14 years.
RC brushless motors
1:10 BL Motor Dragster Turbo 2.0, RC motor
500906313soon available again
The 1:10 BL Motor Dragster Turbo 2.0 2000KV is an electric RC motor created for model-building enthusiasts working on a focused dragster-style setup. Its 2000KV rating gives the drive system a clearly defined basis for matching motor characteristics to the intended vehicle configuration and running style. As a brushless motor, it belongs in hobby projects where drivetrain choice shapes how the model responds under power. The 1:10 format keeps the motor aligned with a widely used RC vehicle scale, making it relevant for replacement work, planned upgrades or a fresh build around compatible components. The designation Dragster Turbo 2.0 places the motor within a performance-oriented setup, while the electric vehicle category points to battery-powered RC use rather than fuel operation. Minimum age 14 Years is stated for this motor. Battery is not included. On the workbench, this motor suits projects where the drive package is selected component by component and the KV figure matters in the overall setup plan. It also fits rebuilds where an existing RC vehicle needs a fresh motor matched to the rest of the electronics. Warning! Not suitable for children under 14 years.
RC combustion engines & glow plugs
Glow Plug Rossi R4, engine part, cold grade
500905008soon available again
The Rossi R4 glow plug is a cold-grade engine part made for nitro model engine setups that depend on the right heat range at the cylinder head. Its compact metal construction combines a threaded shaft, a hex body for tightening and a contact tip at the top, creating the functional layout used for installation and engine operation. A copper sealing washer is included and sits between the plug and the engine head to help create the intended seal at the mounting point. The visible thread and hex profile make the part straightforward to position with the correct tool, while the single-plug format suits maintenance, replacement and tuning work on compatible engines. As a dedicated engine component rather than a general accessory, the Rossi R4 belongs in the workshop kit for glow-powered model running where the specified cold rating is required. On the bench, this part fits naturally into routine service before the next driving session or as a direct replacement when an engine needs a fresh plug. The 14 Years age marking is stated in the supplied data for this hobby accessory, placing it in the enthusiast end of model engine maintenance rather than general toy use. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
ESC VFS-FR2
500906276only available from customer service
500906276 KO PROPO VFS-FR2 electronic speed controller is a compact ESC for brushed motors, made in Japan and ideal for beginners to semi-pros. Preset with LiPo cut-off (6.0 V) and one-button programming with LED. Operation 6.6-7.2 V, motor limit 12 turns (LiPo)/23 turns (LiFe/NiXX), 120 A continuous, 300 A burst, BEC 6 V/3 A, aluminum heat sink and thermal protection; supplied ready to use. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
ESC/RX unit REFLEX-XS, RC electronics, XT60 plug
500906305only available from customer service
The ESC/RX unit REFLEX-XS brings drive control and 2.4 GHz radio reception together in one compact electronics module for 1:10 XS-Chassis vehicles. With its integrated layout, the unit combines key control functions in a single housing and supports a clean installation inside compatible Carson models. Visible connection points include a 3-pin socket marked S, + and -, attached power leads, an ON/OFF switch and an XT60 plug interface. This arrangement gives the module a clear role within the vehicle's electrical system, linking throttle control, signal handling and power routing through one central component. The slim antenna wire is part of the built-in receiver section, while the finned front section adds a distinct technical layout to the housing. The unit is intended for Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. As a replacement or service component, it suits workshop setups, maintenance tasks and rebuilds where the matching chassis reference matters. 14 Years marks the recommended age.
RC combustion engines & glow plugs
Force Engine 32R/5,3ccm with SG Shaft Pu
500901011only available from customer service
Whether it’s for high-performance or hobby runs, this engine is right for you! For many years, Force has produced extremely reliable, robust and above all high-performance internal combustion engines. Very high RPM says it all. Modern, exacting production methods and premium materials are a given. All engines are double ball raced. The carburettors are pretuned at the factory. Easy rope or electric starting, and adjustment behaviour, make handling this engine very simple. With SG Shaft Pull Starter. Technical data: Type 32R/ABC/RS-SG Piston Displacement 5.23 ccm Power 2.2 kW (2.99 PS) RPM 33.000 Weight 467 g
RC combustion engines & glow plugs
Force Motor 15S/2,5 ccm OS pull shaft
500901008only available from customer service
FORCE engine 15S 2.5 ccm OS/cable (500901008) is a powerful all-rounder with side exhaust, equipped with cable starter, slide carburetor and OS shaft. The ABC running gear delivers 0.9 kW (1.2 hp) at 29,000 rpm; displacement 2.49 ccm, bore 15 mm, stroke 13.6 mm, weight 262 g - ideal for ambitious model builders.
RC combustion engines & glow plugs
Force Motor 18R/3.0 ccm OS pull shaft
500901003only available from customer service
The Carson Force engine 18R/3.0 - item number 500901003 - delivers noticeably more power in both the lower and upper speed ranges and is aimed at demanding model builders. With a displacement of 3 cc and three channels as well as side exhaust, pull starter, slide carburetor and threaded shaft, it offers compact, performance-oriented technology.
RC electric motors & controllers
MD-1(Neutral Brake Type)
500906278only available from customer service
Carson KO PROPO MD-1 (item no. 500906278) is a precise, compact electronic speed controller (V/R Neutral Brake) for brushed motors up to type 370 - ideal for small track-driven vehicles and robot models. With 3.0-6.6 V input voltage, max. continuous current 4 A, PWM ~4 kHz and without BEC. Flat and lightweight (27×20.5×4.5 mm, 3 g), it can be mounted using double-sided adhesive tape; supplied ready for use, instructions included. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
MD-1(RC ESC Type)
500906277only available from customer service
The KO PROPO MD-1 (500906277) electronic speed controller for brushed motors up to type 370 impresses with its flat design and simple installation using double-sided adhesive tape. Suitable for TAMIYA Mini Lunch Box (SW-01) and Dancing Rider Trike (T3-01). Three modes (standard, quick reverse, neutral brake), 3.0-6.6V, 4A, PWM ~4kHz, 27×20.5×4.5mm, 3g, ready to use with instructions. Warning! Not suitable for children under 14 years.
RC brushed motors
Motor Brush 2.0
500906286only available from customer service
Carson Motor Brush 2.0 (500906286) is the suitable replacement brush for your drives and directly replaces the item number 500906220. Model building enthusiasts appreciate the uncomplicated exchangeability, with which the running performance and operational readiness of the motor can be quickly restored - an inconspicuous but crucial spare part. Warning! Not suitable for children under 14 years.
RC Motors & Speed Controllers – Your Powerhouse in the Carson Shop
In this category, you’ll find everything you need for RC electric motors & ESCs, nitro engines & glow plugs, brushed motors, and high-performance brushless motors. Whether you’re running electric or gas-powered, Carson has the right motors, controllers, and accessories for your RC vehicle – just pick, replace, and get back on the track!
Electric Motors & ESCs – clean, direct, and responsive
Electric motors power your RC model with rechargeable battery energy. A matching speed controller (ESC) reliably manages throttle and RPM. These systems offer quick acceleration, clean operation, low maintenance, and extremely quiet performance – perfect for indoor spaces and neighborhood use.
The only drawback: batteries need regular charging, and run times are limited by their capacity.
RC Nitro Engines & Glow Plugs – powerful and true-to-life
Nitro and gas engines deliver authentic engine sound, extended running times, and maximum performance.
- Glow plugs, air filters, and after-run oil are essential to keep the engine healthy and long-lasting. The advantages: a realistic driving experience and longer sessions. The downside: more maintenance, fuel costs, and higher noise levels – ideal for hobbyists who enjoy tuning and tinkering.
RC Brushed Motors – Simple & reliable
Brushed motors are classic electric drives with two cable connections. They’re easy to work with, affordable, and perfect for beginners. However, they offer less power and a shorter lifespan compared to brushless systems.
RC Brushless Motors – Modern & efficient
Brushless motors feature three cable connections and are virtually maintenance-free. They deliver greater performance, higher speeds, and a longer service life. Programmable ESCs let you fine-tune power delivery and throttle response – ideal for advanced drivers and racers.
Buying Guide at a Glance
- Choose your system: electric or nitro – depending on usage, noise level, run time, and maintenance preference.
- Match your components: Especially with brushless systems, always pair ESC and motor correctly (voltage, amps, and KV rating must align).
- Beginner-friendly: Start with a brushed motor and standard ESC – simple and barrier-free.
- Power seekers: Upgrading to brushless pays off with higher performance, less maintenance, and tuning options.
- Nitro fans: Keep spare engines and glow plugs on hand – proper care ensures long run times.
Technical Compatibility & Installation
Before buying a new motor or ESC, make sure the components are compatible. Electric motors – especially brushless – must match the controller’s voltage, amperage, and KV rating (RPM per volt). When installing, ensure all cables are properly soldered or connected to avoid malfunctions. A solid motor mount is essential – any play can damage the drivetrain or chassis. High-power setups may require cooling solutions like fans or heatsinks.
Finally, a well-matched pinion/spur gear setup determines the balance between acceleration and top speed.
Power Supply & Battery Selection
Battery choice is crucial for both performance and safety. Brushed setups typically use NiMH batteries – durable and easy to handle. Brushless systems generally run on LiPo batteries, which offer higher energy density and discharge rates – ideal for high-power motors and long run times. Check that your ESC supports the battery type. Many quality controllers include a BEC (Battery Eliminator Circuit) to regulate voltage for the receiver. Make sure chargers and connector types match your battery. For safety, LiPo alarms or cutoff features are highly recommended to prevent over-discharge or overheating.
Maintenance & Care
RC motors work hard – proper care keeps them running smoothly. Brushed motors require periodic maintenance: the brushes and commutator wear with each run. Cleaning with compressed air or motor cleaner extends their lifespan. Brushless motors are mostly maintenance-free but should still be checked for dust and loose wires. Nitro engines require more attention: apply after-run oil after every session to prevent internal corrosion. Clean or replace the air filter regularly, especially when driving off-road. This protects performance and extends engine life. With the right care, your equipment will deliver consistent performance and long-lasting fun.
Why Carson is the right place for you
Carson offers a large, well-organized selection of motors, ESCs, spare parts, and accessories. Whether you need a simple replacement motor or want to optimize and upgrade your RC setup – you’ll find the perfect components here.
Start browsing now and build your ideal power system with Carson!