Remote-controlled systems

FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz

€119.99

The FS 14K Reflex Stick Pro 4 brings a 14-channel layout, 2.4GHz transmission and a modern ergonomic RC housing into one control system shaped for complex model functions. Its carbon-look surface and illuminated logo give the transmitter a technical, workshop-ready appearance when powered on. The channel structure is designed for detailed function control. Four channels work continuously and fully proportionally for direct response through the control sticks, while channels 7, 8, 9, 10, 13 and 14 are assigned to 3-position toggle switches. Channels 5, 6, 11 and 12 operate through 3-position push buttons with centre position, creating a clear split between proportional inputs and switched functions. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply allows up to 11 V without BEC. A 15-channel receiver is listed in the included contents. For setup work, channels 1 to 4 feature servo reverse and trim, and channels 1 and 4 add dual rate for servo travel adjustment. This makes the system suitable for models that need tailored steering, throttle or auxiliary function behaviour. 100% compatibility is stated for TAMIYA MFC 01, MFC 02, MFC 03 and DMD units, which suits truck and function-model layouts with multiple switching tasks. 14 Years is stated as the recommended age.

Remote-controlled systems

FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz

€149.99

The FS 14K Reflex Stick Pro 4 LCD 2.4GHz brings broad channel control and fine setup options into one radio system built for demanding RC models. With 14 channels, an LCD layout and a 15-channel receiver in the set, it supports complex functions that go beyond basic steering and throttle, while the carbon-look finish and illuminated logo give the transmitter a distinctive technical appearance. Channels 7, 8, 9, 10, 13 and 14 use 3-position toggle switches, while channels 5, 6, 11 and 12 use 3-position push buttons with centre position. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply can reach up to 11 V without BEC. A Graupner J/R connector system is used for integration, and the radio is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as DMD units. The set includes the 14-channel LCD remote control, a 15-channel receiver and a manual. For truck, construction and function models with multiple switching tasks, the channel layout supports lighting, sound and auxiliary functions from one handset. The 14 Years marking fits advanced RC use, where stored model setups and detailed channel assignment matter during regular driving and system changes.

Remote-controlled systems

FS 6K Reflex Stick Pro, transmitter, 2.4GHz

€99.99

The FS 6K Reflex Stick Pro 4 2.4GHz brings 6-channel radio control into a layout built for detailed model setups and precise handling. Four continuously adjustable, fully proportional channels work alongside a 3-position push button on channel 5 and a 3-position toggle switch on channel 6, giving a clear control structure for driving functions and switched features. The integrated failsafe system adds an important control function for model operation. Trim for channels 1-4 supports exact correction directly at the transmitter, while dual rate for channels 1-2 adjusts servo travel for a more tailored response. The control sticks use precise, smooth mechanics, and the housing combines an ergonomic shape with a carbon-look surface and an illuminated logo when powered on. The transmitter operates at 4.8-6 V with 4 AA cells, the receiver power supply reaches up to 11 V without BEC, and the connector system uses Graupner J/R. Compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units expands the range of suitable model applications. On the bench, the channel layout supports careful setup of steering, throttle and auxiliary functions before a model heads out. During driving sessions, the separate switching options and proportional control help keep inputs clean and deliberate across different model configurations.

Remote-controlled systems

FS 6K Reflex Stick Pro, transmitter, 2.4GHz

€109.99

The FS 6K Reflex Stick Pro brings 2.4GHz radio control, a 6-channel layout and an LCD interface into one focused setup for model driving with a clear, technical feel in hand. Smooth control sticks, an ergonomic housing and a carbon-look surface shape a transmitter that suits longer sessions at the workbench and on the track alike. Channels 1 to 4 are continuously adjustable and fully proportional, while channel 6 is assigned to a 3-position toggle switch and channel 5 to a 3-position push button with centre position. The transmitter stores 15 model memories, making it easier to keep separate configurations ready for different vehicles. For channels 1 to 4, servo reverse changes direction of movement, trim corrects neutral position, dual rate adjusts servo travel, EPA limits servo travel and EXP changes response characteristics around centre input. The receiver power supply can reach up to 11 V without BEC, and the system is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as the DMD unit. A 6-channel receiver and manual are included. 4 AA cells are required separately for the 4.8 to 6 V transmitter operating voltage. With a minimum age marking of 14 years, this radio set fits hobby-focused RC setups where multiple channel functions, stored profiles and detailed response adjustment matter during driving and setup.

Remote-controlled systems

KO Battery Stand Unit EX-NEXT Accessory

€63.99

The KO Battery Stand Unit in BlackSP is a dedicated accessory for the EX-NEXT designation named in the data, adding a defined support element to an RC radio setup with a focused, technical look. Its compact stand format suits bench organisation and pit-area handling where equipment benefits from a fixed resting point between driving sessions. The data identifies this version as BlackSP, giving the accessory a distinct finish within the EX-NEXT range rather than leaving it as an unspecified spare. As a stand unit, it serves a clear hardware role in the surrounding setup and fits naturally into model-building and RC routines that involve repeated handling of radio equipment. The accessory is listed separately, so the emphasis stays on its specific function as an add-on component for an existing system. Batteries are not included. In practical use, the stand unit supports a more ordered workspace during charging breaks, maintenance tasks or session changes at the track. It also suits hobby desks where RC equipment is stored ready for the next run while keeping the EX-NEXT setup visually consistent.  Warning! Not suitable for children under 14 years.

RC remote controls

KO Trigger Pad Set, model accessory

€10.59

The KO Trigger Pad set is a model accessory from the Carson Modelsport range, listed with the exact designation used in the product data. With an assembly time unit in minutes, a voltage unit in volt, a maximum speed unit in km/h and a maximum operating time unit in minutes present in the data structure, the available verified detail for this entry remains focused on the accessory name itself rather than on technical fitment or performance figures. That makes the strongest, most reliable description a precise one: KO Trigger Pad set identifies a specific spare or replacement component for model-related equipment, and it belongs in a parts selection built around exact naming. The data confirms that batteries are not included and gives an age marking of 14 Years. No further verified information is provided here on compatibility, dimensions, material composition, included quantity, or supported systems, so those points are left unstated rather than guessed. Within a hobby bench, workshop drawer or model maintenance setup, an exactly named accessory set helps keep existing equipment in service and supports targeted parts searches when a matching component is needed. The entry is therefore written around the confirmed designation and the clearly stated 14 Years age marking, without inventing fitment details that the data does not supply.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

RA 3Ch Reflex Stick Pro 4, remote control, 2.4GHz

€49.99

The RA 3Ch Reflex Stick Pro 4 brings 2.4GHz radio control together with a classic stick layout for model driving that calls for direct, proportional input. With 3 channels and 2 continuously adjustable, fully proportional control paths, steering and throttle commands can be metered with fine control, while channel 3 is switched in 2 positions for a clear auxiliary function. Channel 1 includes dual rate to adjust servo travel, which helps match the steering response to different model setups. Servo reverse changes the direction of movement for the channels when the installation requires it, and the trim function for channels 1-2 supports accurate neutral settings. The transmitter operates at 4.8-6 V with 4 AA cells, and the receiver power supply allows up to 11 V without BEC. The connector system uses Futaba/Graupner J/R, giving the set a clear interface for compatible RC components. The set includes the 3-channel remote control, a 4-channel receiver and a manual. An LED battery status indicator keeps the transmitter charge level in view during running sessions, while the failsafe system provides a defined response if the radio link is lost. Age 14 Years+  Warning! Not suitable for children under 14 years.

Remote-controlled systems

RA 4Ch Reflex Stick Pro 4, remote control, 2.4GHz

€64.99

The RA 4Ch Reflex Stick Pro 4 2.4GHz LCD brings 4-channel control and detailed setup functions into one radio system for model driving from age 14 years. Its LCD layout supports direct access to key settings, while 15 model memory slots keep multiple vehicle configurations stored and ready for use. Two fully proportional channels allow continuously adjustable steering and throttle input, and 2 additional switch channels handle special functions on compatible models. Channels 1 and 2 can be tuned with servo reverse, trim, dual rate, EPA and EXP, giving clear control over direction, centre position, servo travel limits and response curve. The integrated failsafe system adds a concrete control safeguard for supported setups. The transmitter operates at 4.8 to 6 V with 4 AA cells, and the connector system uses Graupner J/R. A 4-channel receiver is included, so the system can move straight into installation on a suitable model. The receiver power supply supports up to 11 V without BEC, which suits a wide range of hobby configurations. This combination fits model-building enthusiasts who want one radio system for several vehicles, special functions and fine setup work at the bench or track.  Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Pro 3 Electric Set, RC radio system

The RC-Reflex Pro 3 Electric Set brings the core electronics for an RC ground model into one coordinated package. A 2-channel 2.4 GHz transmitter works with a 4-channel mini receiver to handle steering and throttle commands, while the pistol-grip layout supports one-handed control with a trigger and side wheel format familiar in car-based RC setups. Alongside the radio link, the set includes a CS-6 steering servo for installation in a compatible model and a 7.2 V 3000 mAh drive battery for the vehicle itself. The Expert Charger is part of the set, and 4 AA transmitter batteries are also included for the handset. This combination suits fresh builds, replacement electronics, or an upgrade from older radio gear where the main control components need to be assembled in one step. With 2 frequency channels and 16 listed parts, the set covers the central functions needed to equip a model for radio-controlled driving. In use, the electronics set fits naturally into workshop preparation before a chassis goes to the track, car park or garden path. The included components support installation, charging and control in a format aimed at hobby-focused RC driving, whether for a first compatible setup or as a practical replacement package for an existing model.  Warning! Not suitable for children under 14 years.

RC remote controls

REFLEX STICK PRO 3.1, radio set, 2.4GHz

€84.99

The REFLEX STICK PRO 3.1 Elektro Set brings the core electronics for an RC model into one coordinated package, centred on a 2-channel 2.4GHz radio system with fully proportional control. Steering and throttle inputs respond progressively rather than in fixed steps, which supports cleaner line control on the track, at the workbench, or during first setup runs. The transmitter operates on 4.8-6V and uses a stick layout familiar across many hobby-grade applications. Beyond the radio itself, the set combines a 2.4G receiver, a CS3 servo, a 7.2V 2500mAh racing pack, a USB charger with 7.2V 250mAh output, and 4 AA Ansmann batteries. Servo reverse is available on both channels, so steering or throttle direction can be corrected directly at the transmitter when the installed linkage runs opposite to the intended movement. The steering and throttle trim functions help dial in neutral position and straight tracking, while dual rate on the steering channel allows reduced or expanded steering travel depending on the model's response. A charging socket with positive pole inside and an LED battery charge status indicator add clear handling details during use. The plug system is compatible with Futaba and Graupner JR, which broadens integration across common RC installations. In a touring car, buggy, boat, or similar hobby build, the set covers the key radio and power components needed to move from installation to controlled running with matched electronics.  Warning! Not suitable for children under 14 years.

RC remote controls

REFLEX XS 2.4GHz Transmitter, RC controller

€25.99

The REFLEX XS 2.4GHz transmitter brings classic wheel-style RC control to compatible XS-Chassis models with a compact pistol-grip format, a side steering wheel and a trigger for throttle and brake input. The black and dark grey housing keeps the layout focused, while the 2.4GHz system suits interference-conscious driving sessions where clean radio control matters. Its control concept follows the familiar car transmitter arrangement: the foam-covered wheel handles steering input, and the trigger manages acceleration and braking through one hand position. Visible setup markings such as REV, ST, TH and D/R point to onboard adjustment functions that support model-specific tuning rather than a fixed one-setting layout. The top section also carries additional adjustment points, giving hobby users direct access to setup changes on the transmitter body. This transmitter is intended for CARSON XS-Chassis references 500404360, 500404361, 500404362, 500404363, 500404252, 500404253, 500404254 and 500404255. The 14 Years age marking is stated in the product data. In the workshop, at the track or on a casual driving surface, the wheel-and-trigger format keeps steering and speed control close together for responsive handling on compatible RC vehicles.

RC remote controls

RA 4Ch Reflex Wheel Pro 4, RC transmitter

€59.99

The RA 4Ch Reflex Wheel Pro 4 2.4GHz LCD brings a compact pistol-grip layout, 4-channel control and a clear display into one radio system for RC driving with precise steering and throttle input. Its angled 4° steering wheel position, ball-bearing control unit and carbon structure shape a focused handling feel at the transmitter itself while the blue-lit LCD keeps setup values readable at a glance. Two channels work fully proportionally for finely graded control, while channel 3 can be programmed as a switch or button function and channel 4 uses a 3-level switch. The transmitter operates at 3.6-4.5 V, and the receiver accepts 3.5-10 V without a BEC, which broadens the range of compatible model installations. A failsafe function adds a concrete control safeguard if signal is lost. The system also stores settings for up to 15 models, which helps keep separate configurations ready for different vehicles instead of resetting trim and response values each time. Included are the 4-channel 2.4 GHz transmitter, a 4-channel mini receiver and instructions. 4.8-6 V operation and the compact receiver format suit hobby setups where steering, throttle and auxiliary functions need one coordinated radio system for track driving, car park sessions or workshop tuning between runs.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€134.99

The Reflex Wheel Pro 4 set brings core RC electronics together in one 2.4 GHz package built around a 4-channel pistol-grip transmitter, matching mini receiver, 6 kg metal-gear servo and brushless set. The transmitter uses 2 infinitely variable fully proportional channels and 2 additional switchable channels, opening the door to steering, throttle and extra vehicle functions from a single handset. Its LCD interface supports direct setup work for hobby-grade driving, with servo reverse on channels 1 and 2, trim for throttle and steering, dual rate adjustment, Expo and ABS functions, and 15-model memory for running more than one vehicle without rebuilding settings each time. Channel 3 can be programmed as a switch or button function, while channel 4 uses a 3-level switch. An LED battery status display keeps the transmitter power level visible during use. The transmitter operates at 3.6-4.5 V, and the receiver power supply is rated at 3.5-10 V without a BEC. On the vehicle side, the waterproof nano receiver and compact electronics suit tight chassis layouts, while the brushless set adds the drive hardware needed for responsive running. The included instructions complete the set. With 14 Years as the stated age marking, this package fits hobby sessions focused on tuning steering feel, throttle response and auxiliary functions for track, touring or general RC driving.  Warning! Not suitable for children under 14 years.

RC remote controls

FS 3K Reflex Wheel Pro 4 2,4GHz

€45.99

The Carson RA 3Ch Reflex Wheel Pro 4 2.4GHz (500500110) is an ergonomic 3-channel remote control with 2.4 GHz system, nano receiver and instructions. For model building fans, it offers two infinitely variable proportional channels, programmable channel 3, servo reverse, trim and dual rate functions, LED battery indicator, failsafe, ball bearing steering wheel and operating voltage 3.6-4.5 V. Not for children under 14 years.   Warning! Not suitable for children under 14 years.

Remote-controlled systems

Reflex Wheel Pro 4 Gyro Receiver, 4-channel

€32.99

The Reflex Wheel Pro 4 Gyro receiver brings 4-channel radio control and integrated gyro support together in one compact module for RC model setups. Its black housing carries clearly printed CH1, CH2, CH3 and CH4 markings, making the connection layout easy to read during installation and helping keep each assigned function in order inside the vehicle. The unit is part of the Reflex Series Pro 4 range and includes dedicated Pair and FS markings directly above the connector area. That layout keeps binding and failsafe functions tied closely to the receiver body instead of leaving key setup steps to guesswork. Built-in DEC and INC controls add direct access to adjustment changes on the module itself, which is useful when fine-tuning the gyro response in a workshop setting. The compact rectangular form also suits tighter chassis layouts where electronics need to sit neatly alongside steering and drive components. In practical use, this receiver fits hobby builds that need organised channel assignment and onboard adjustment access in one place. The 14 Years marking identifies the recommended age, while the receiver format suits model-building enthusiasts working on compatible RC vehicles and electronics installations.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€75.99

The Reflex Wheel Pro 4 brings 2.4 GHz control, LCD-based setup and a compact 4-channel layout into one radio set for model vehicle builds and upgrades. A wheel-style transmitter, 4-channel mini receiver and 6 kg servo with metal gearbox form the included control package, giving hobby projects the core hardware needed for steering, throttle and auxiliary channel operation. The transmitter runs on 3.6-4.5 V and offers 2 infinitely variable fully proportional channels for precise input, plus 2 switchable channels for added functions. Channel 3 can be programmed as a switch or button function for a servo, while channel 4 uses a 3-level switch. A ball-bearing control unit supports accurate steering input, and the steering wheel sits at a 4° angle for a more natural hand position during longer driving sessions. LED battery status indication keeps the transmitter power level visible at a glance. For setup work, the system adds trim for throttle and steering, servo reverse on channels 1 and 2, and dual rate to limit servo travel or reduce speed response. Expo and ABS functions expand tuning further for different vehicle layouts and track conditions, while 15-model memory helps keep settings organised across multiple RC machines. The waterproof nano receiver broadens installation options in demanding vehicle builds.  Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Pro 3, electric set, 2.4 GHz RC

€124.99

The RC-Reflex Pro 3 Electric Set brings together the core electronics needed to equip ARR and assembly kit models for the track or the water. Built around a 2.4 GHz radio system, the set suits RC cars and boats and combines control hardware, charging equipment and NiMH power components in one coordinated package. The transmitter works with an operating voltage of 4.8 to 6 V and pairs with a 4-channel receiver. Two continuously controllable fully proportional channels handle steering and throttle inputs with direct response. Servo reverse is available on both channels, while trimming functions for accelerator and steering help align the model accurately. Dual rate on both channels limits servo travel when a calmer steering setup is needed. The integrated fail-safe adds a concrete control function for signal loss situations, and the plug system supports Futaba and Graupner-J/R connections. A charging socket with plus terminal inside is built into the system. Power supply is covered by a 7.2 V 3000 mAh NiMH driving battery with TAMIYA plug and 4 NiMH Mignon 1.2 V 2100 mAh transmitter batteries. The included 2-in-1 charger works from 100-240 V, 50-60 Hz AC and provides max. 2 A at 9 V on output 1 and max. 0.5 A at 6 V on output 2. With the CS-6 steering servo, receiver, charger and battery set included, this electric package fits hobby setups that need a complete radio and power foundation for Tamiya-compatible models. Age 14 Years  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel Start, radio control, 2.4 GHz

€34.99

The Reflex Wheel Start brings classic wheel-style RC control into a compact 2.4 GHz system with a black pistol-grip transmitter and matching 3-channel mini-receiver. A large side steering wheel and trigger layout create the familiar handling used in many RC car setups, while the wireless link supports clean installation in compatible models. Two fully proportional channels allow gradual steering and throttle input instead of simple on or off commands. Servo reverse changes the travel direction when a steering or throttle servo moves the wrong way after installation, and the trim functions for both gas and steering help centre the model accurately. Dual rate on both channels makes it possible to limit servo travel, which is useful when a setup needs reduced steering throw or a calmer response. The transmitter operates on 4.8 to 6 V, and receiver powering without BEC is possible up to 11 V. The Uni connector system supports Futaba and Graupner-J/R layouts, adding flexibility for different hobby setups. An LED battery status display keeps the transmitter power level in view during driving sessions or bench setup. The integrated failsafe adds a concrete control feature for RC use, and the included transmitter with mini-receiver forms a practical entry point for 14 years and up.  Warning! Not suitable for children under 14 years.

RC remote controls

FS Reflex Stick Multi Pro, RC radio, 14CH LCD

€159.99

The FS Reflex Stick Multi Pro LCD is a 14-channel 2.4 GHz RC radio system built for complex model setups that need more than basic steering and throttle control. With 2 control sticks, 4 pushbuttons, 4 ON/OFF/ON switches and 2 rotary potentiometers, it gives hobby users direct access to multiple functions on vehicles and vessels, from light and sound to winch, support legs, water pump and water monitor control. Its 15 model memories keep different configurations ready for repeated use across several RC builds. The blue backlit LCD supports menu-based setup and status checks, while the 2.4 GHz FHSS system provides stable signal handling in the 4.8 - 6 V operating range. Servo reverse and trim functions are available for channels, and steering setup can be refined further with Dual Rate for servo path limitation, EPA for servo travel limiting and EXP for response adjustment. The system is also fully compatible with TAMIYA MFC 01/03 and DMD units. A failsafe function adds a defined response if signal transmission is interrupted. Included are a 14-channel 2.4 GHz transmitter, a 14-channel 2.4 GHz receiver and a multilingual handbook. 4 AA batteries are required separately for the transmitter. The Graupner-J/R plug system supports integration into compatible RC electronics, making this radio a strong choice for multi-function trucks, working models and other feature-rich RC machines.

RC remote controls

FS Reflex Stick Pro 3.1, RC transmitter, 2.4 GHz

€49.99

The FS Reflex Stick Pro 3.1 brings classic stick-transmitter handling to 2.4 GHz RC control, pairing 2 fully proportional channels with gradual response for measured steering and throttle inputs. With its 4.8-6 V operating voltage from 4 AA batteries, the radio system is set up for hobby use where clear control and direct adjustment matter at the bench and on the track. Channel 1 features dual rate to limit servo travel when a model needs a narrower steering range, while channels 1-2 add trim and servo reverse for matching direction and neutral position to the installed setup. The included 4-channel receiver expands the system beyond the transmitter name alone and connects through the Futaba/Graupner J/R plug system. A fail-safe function adds a concrete control safeguard if signal transmission is interrupted, and the LED battery status display shows the transmitter power state at a glance. The charging socket with positive pole inside adds a dedicated connection point to the radio unit itself. In use, the layout suits model-building enthusiasts who prefer stick control for boats, vehicles or other compatible RC builds with 2-channel operation. The combination of receiver, adjustment functions and 2.4 GHz radio link supports setup work, fine correction and regular driving sessions without turning the transmitter into a one-setting system.

RC remote controls

Reflex Wheel Pro 4, RC transmitter, 2.4 GHz

€69.99

The Reflex Wheel Pro 4 brings 2.4 GHz control, LCD setup access and a wheel-style layout into one radio system built for RC model use. With 4 channels, 2 included mini receivers and a transmitter operating voltage of 3.6-4.5 V, it covers steering, throttle and added switching functions in a compact setup for multiple vehicles. Channels 1 and 2 work as fully proportional controls, giving fine input over steering and throttle instead of fixed steps. Channel 3 can be programmed as a switch or button function for a servo, while channel 4 uses a 3-level switch for added onboard functions. Servo reverse for channels 1 and 2 changes direction of travel when a model layout requires it, and the receiver power supply range of 3.5-10 V supports installation in different RC configurations without a BEC. The ball-bearing control unit supports precise steering input, while trim, dual rate, expo and ABS functions allow response to be adjusted to the model and surface. The LCD screen and LED battery status display keep key settings and charge information visible during setup and running. A failsafe function adds a concrete control feature for signal loss situations, and 15-model memory stores settings for different vehicles. The Uni connector system for Futaba and Graupner-J/R broadens compatibility across existing RC equipment. 4 AA batteries are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel X1, RC transmitter, 2.4GHz 2-channel

€47.99

The Reflex Wheel X1 brings 2.4GHz radio control and a classic pistol-grip layout into one focused setup for RC driving. A side steering wheel, trigger throttle and 2 fully proportional channels give fine control over steering and speed, whether the model is lining up for a clean straight or working through tighter corners. At the technical level, the transmitter runs on 4.8 to 6V and pairs with a compact 4-channel mini-receiver measuring 36 x 25 x 15 mm. The receiver power supply supports up to 11V without a BEC, and the Uni connector system J/R broadens compatibility across common hobby installations. A charging socket with positive pole inside is built into the transmitter, and an LED battery status display keeps the power level visible during use. The set is also Tamiya kit compatible, which makes it a practical radio option for many workshop and upgrade projects. Included are a 2-channel 2.4GHz transmitter and a 4-channel 2.4GHz receiver. 14 years marks the recommended age. 4 AA batteries are required separately, so the radio can move straight into bench setup, model installation and the first tuning session once the power supply is in place.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

Akuma Radio 2.4GHz, transmitter, 2-channel RC

€26.99

The Akuma Radio 2.4GHz transmitter brings classic pistol-grip RC control to compatible models with a compact hand-held layout, a side steering wheel and a trigger for throttle and brake input. Marked controls for REV, NOR, BIND, SET, CH2 and CH3 place the core functions directly on the housing, keeping the operating sequence clear during setup and driving. The transmitter is listed as a 2-channel unit in the product data, while the housing markings also show CH2 and CH3 functions alongside D/R ST, ST TRIM and TH TRIM controls. That layout gives model-building enthusiasts direct access to steering trim, throttle trim and steering dual-rate adjustment on the transmitter itself, so the response can be matched more closely to the connected RC model. The 2.4 GHz R/C system supports modern wireless operation without a trailing antenna arrangement, and the pistol-grip form keeps steering and speed control separated into distinct hand movements. Used with Akuma, Bokusa or Drakuro RA models, this transmitter suits driving sessions where clean steering inputs and quick throttle control matter. The recommended age is 14 years and up. Batteries are required separately.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

Akuma Receiver 2.4GHz, RC receiver, 3-channel

€23.49

This 2.4 GHz receiver module is built as a replacement part for compatible Akuma, Bokusa and Drakuro RC models, bringing the radio system back into the electronics layout with a compact housing, a long antenna wire and a 3-channel connection format. The marked ports for BAT, CH1, CH2 and CH3 give the installation a clear structure when the module is fitted into the chassis. As a dedicated receiver, this component is made for hobby-grade radio control setups where the signal path between transmitter and onboard electronics needs the correct matching part. The rectangular case keeps the unit easy to position among the existing electronics, while the plug-in connector block supports direct connection of the relevant control functions. The 2.4 GHz specification suits modern RC operation, and the 3-channel design leaves room for steering, throttle and one additional switched or controlled function, depending on the compatible model's layout. In workshop use, this receiver fits naturally into repair, maintenance or parts replacement when an existing model needs the correct control module again. It also suits enthusiasts keeping compatible Carson platforms running with the intended electronics configuration for driving sessions and technical upkeep.  Warning! Not suitable for children under 14 years.

RC remote controls

FS Reflex Stick II, RC remote control, 6-channel

€109.99

The FS Reflex Stick II brings 2.4 GHz control and a classic dual-stick layout to RC vehicles and boats, with 6 channels operated independently through 2 joysticks, 1 ON/OFF/ON button and 1 ON/OFF/ON switch. Its FHSS system uses Frequency Hopping Spread Spectrum for radio transmission, while the included 6-channel receiver completes the core control package. The radio system runs at 6 V from 4 AA batteries and supplies the BEC receiver with 4.8 - 6 V. Servo reverse on 2.4 GHz changes the direction of assigned channels when a servo reacts opposite to the intended command, and the trim function helps dial in channel response with greater precision. A Graupner J/R plug system supports connection within compatible RC setups. The integrated charging socket adds a direct charging connection within the system. Full compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units makes the set a strong match for expanded truck and function-model installations. On the bench, the 6-channel layout supports coordinated setup of steering, throttle and auxiliary functions before the first run. At the lake or on the track, the dual-stick format and extra switching inputs suit models that need more than basic steering and speed control. 4 AA batteries are required separately.

RC remote controls

FS Reflex X1, 2.4 GHz radio system, 2-channel

€46.99

The FS Reflex X1 brings classic wheel-style RC control to cars and kits that need precise 2.4 GHz radio handling. Its 2 fully proportional channels work through a side steering wheel and trigger layout, so steering and throttle inputs can be adjusted smoothly across the full control range instead of switching between fixed positions. At the transmitter, servo reverse is available on both channels to invert steering or throttle direction when a model setup requires it. Separate trim functions for steering and throttle help correct the neutral position, and dual rate for both channels limits servo travel for a more measured response. The transmitter operates on 4.8 to 6 V and includes a charging socket with the positive pole inside. An LED battery display shows the transmitter status at a glance during use. The included 4-channel mini receiver measures 36 x 25 x 15 mm, uses the J/R Uni connector system, and supports receiver power up to 11 V without a BEC. This radio system suits Tamiya kit compatible setups and other RC vehicle builds that need compact receiver dimensions and adjustable control behaviour. A 2-channel 2.4 GHz transmitter, a 4-channel 2.4 GHz receiver and a handbook are included. 4 AA batteries are required separately.

Remote-controlled systems

MR-8 2.4GHz MX-F RX, receiver, 8-channel

€49.99

The MR-8 2.4GHz MX-F RX brings multi-channel control into RC builds that need more than a basic steering and throttle layout. Its 8-channel format, marked A through H, opens room for servos and additional switched or proportional functions, while the separate BAT. connection gives the power input its own clearly identified position. The black receiver housing keeps the connector side easy to read during installation, with each channel printed directly on the case beside the pin rows. Visible gold contacts support clean plug-in wiring, and the compact module format suits model layouts where electronics need to stay organised. A recessed SET UP point is integrated into the case for binding or configuration access without adding external parts to the housing. The designation KO Receiver 8Ch MR-8 MX-F RX and the 2.4GHz specification place this unit in the radio electronics side of the hobby, where dependable channel assignment and neat cable routing matter as much as the drive system itself. In workshop use, the labelled port layout helps when assigning steering, speed control and extra functions across larger RC configurations. For 14 Years and up, the receiver fits enthusiast projects where installation, setup and system matching are part of the hands-on model-building process.  Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Start Electric Set, RC set, 1:10

€69.99

Built for 1:10 TAMIYA RC kits, the RC-Reflex Start Electric Set brings the key electronics for vehicle operation into one coordinated package. The set combines a compact 3-channel 2.4 GHz transmitter with matching receiver, a CS-3 steering servo, a 7.2 V 2500 mAh NiMH driving battery, a USB charger and 4 x AAA transmitter batteries, creating a clear starting point for hobby builds that still leaves room for precise setup work. The pistol-grip transmitter uses a wheel-style steering control and trigger throttle layout that suits RC car handling, while 2 fully proportional channels respond gradually rather than in fixed steps. Trim functions for accelerator and steering help correct running behaviour, and the servo reverse function allows the steering direction to be switched when the installation calls for it. A fail safe system adds a concrete control safeguard, and an LED battery status display keeps the charge state visible during operation. The included 3-channel receiver provides the matching vehicle-side link for the 2.4 GHz system. For workshop bench setup, club track preparation or the first runs after a fresh kit build, the set covers the central radio and power components in one box. The 14 Years marking fits the hobby-oriented character of the set, especially where model builders want a straightforward electronics package for getting a 1:10 chassis ready for driving.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Stick Multi Pro, RC radio system, 14-channel

€129.99

The Reflex Stick Multi Pro brings 14-channel control to demanding RC setups with an interference-free 2.4 GHz FHSS radio system and a layout built for models that need more than basic steering and throttle. In model trucks, boats or construction machines, the combination of 4 proportional channels and 10 switching channels supports detailed command over driving and auxiliary functions from one handset. The transmitter operates on 4.8-6 V from 4 AA batteries, and the receiver uses a 4.8-6 V power supply. Trim is handled by sliders, which supports compatibility with TAMIYA MFC 01, 02 and 03 units as well as the DMD unit. The Graupner J/R plug system supports straightforward receiver connection within many hobby-grade installations. A charging socket with positive pole inside is built into the transmitter, and the LED battery status display keeps the power level visible during running sessions. This RC radio system suits multi-function models where separate switching and proportional control need to work side by side, such as scale trucks with light and sound modules or boats with added onboard functions. The included 14-channel receiver completes the core radio set, while 4 AA batteries are required separately.

Remote-controlled systems

FS 15K Reflex Stick Pro 4, RC remote control

available from December

The FS 15K Reflex Stick Pro 4 LCD-MFC 2.4GHz brings broad channel control and precise radio setup to complex RC builds. With 15 controllable channels, a 2.4 GHz FHSS system and a range of up to 150 m, this RC remote control suits functional models that need more than basic steering and throttle, whether on the workbench or out in operation. The included 15-channel receiver is compact and lightweight, which helps when space inside a model is limited. A blue backlit LCD display keeps key settings visible, while 15 model memories store different vehicle setups in one unit. Channels 1-4 can be adjusted with dual rate, EPA and EXP, and servo reverse with trim function supports accurate channel setup across the system. The transmitter operates at 4.8 - 6 V and uses 4 AA batteries. Graupner J/R connector compatibility adds flexibility when integrating existing RC components. Full compatibility with the Tamiya MFC sound unit allows its functions to be controlled directly via buttons, which is especially useful in detailed truck and functional model layouts. New stick units with sensitive mechanics, 3-position toggle switches, 3-position push buttons with centre position and height-adjustable CNC-milled aluminum sticks give the control layout a more tailored feel during longer driving sessions. A receiver, instruction manual and transmitter are included.

RC remote controls

Reflex Stick Truck-Set 2.4G, RC set, 6-channel

soon available again

The Reflex Stick Truck-Set 2.4G brings the core electronics for an RC truck into one coordinated package, centered on a 6-channel 2.4 GHz stick transmitter and matched receiver. With 2 servos, a truck control unit, truck motor, LED truck light, a 7.2 V 2100 mAh battery pack and an Expert Charger 1 A, the set covers the main control, drive and lighting functions needed for a model truck layout. The radio system uses FHSS transmission, a frequency-hopping signal method that supports a steady connection between transmitter and receiver. Servo reverse and trimming are available on all channels, which helps align steering direction, throttle response and added functions to the truck's installation. The transmitter operates on 4.8 to 6 V from 4 AA batteries, and the receiver power supply is also specified at 4.8 to 6 V. A Graupner-J/R plug system is stated for the connections, giving the set a defined interface for compatible RC components. On the bench, the included electronics suit a fresh truck build as well as a replacement setup for an existing model. Once installed, the combination of radio control, motor drive, steering servos and LED lighting supports realistic truck running with controlled manoeuvres and added light functions during operation.

RC remote controls

REFLEX-S transmitter 2023

only available from customer service

RC remote controls

REFLEX-S transmitter with ESC/RX unit 2023 TAM

only available from customer service

RC remote controls

FS Reflex Stick Pro 3.1 2.4G LCD 4 Ch

available in stores

The FS Reflex Stick Pro 3.1 2.4 GHz LCD (500500085) is a compact 4-channel remote control for model builders who demand precise control. Two infinitely variable, fully proportional channels, 15 model memories, servo reverse and trim, two additional switching channels, dual rate, EPA, EXP and failsafe offer variable fine adjustment. Operation 4.8-6 V (4×AA), charging socket, Graupner J/R plug; the 4-channel receiver no. 500501533 is recommended.

RC remote controls

Reflex Wheel Start, radio system, 2.4 GHz

available in stores

The Reflex Wheel Start radio system brings 2.4 GHz control, a compact 3-channel layout and a classic wheel transmitter format into one setup for RC vehicle use. The grey handheld transmitter works with a matching 3-channel mini-receiver, creating a focused control package for steering, throttle and an additional channel. Its fully proportional channels allow gradual input instead of simple on-off commands, so steering corrections and throttle changes can be fed in with more precision. Servo reverse changes the direction of the channel output when a steering or throttle function needs to be matched to the installed electronics. Separate trim settings for steering and throttle help centre the response, while dual rate on both channels limits servo travel for a more controlled setup range. The transmitter operates on 4.8 to 6 V, and the receiver can be powered with up to 11 V without BEC. The Uni connector system supports Futaba and Graupner-J/R compatibility. Included are a 3-channel 2.4 GHz transmitter, a 3-channel mini-receiver and instructions. The 14 years marking is stated in the product data. This radio set suits hobby workbench setups, replacement installations and fresh RC vehicle builds where compact receiver dimensions and direct wheel-style control are part of the plan.  Warning! Not suitable for children under 14 years.