RC shock absorbers & damper bridges
Discover RC shock absorbers, damper bridges and shock towers from Carson that take your suspension to the next level. Precisely manufactured for optimal damping, improved traction, and safe handling – even under heavy loads and demanding off-road conditions.
RC shock absorbers & damper bridges
Discover RC shock absorbers, damper bridges and shock towers from Carson that take your suspension to the next level. Precisely manufactured for optimal damping, improved traction, and safe handling – even under heavy loads and demanding off-road conditions.
More
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, model accessory, 55 mm
500405863€28.49
A 1:10 chassis gains a clear suspension upgrade with this aluminium oil damper set in 55 mm format. The set contains 4 matching dampers, each built with a silver shock body, blue top cap, threaded adjustment collar, white coil spring and black eyelet mounts at both ends. The oil-filled design works through the damper body and shaft to control suspension travel more precisely than a spring alone. The threaded collar allows preload changes directly on each unit, making ride height and spring tension tuning part of the setup process on compatible model vehicles. With 4 dampers in one set, front and rear suspension can be equipped with the same component style for a more uniform chassis response. The aluminium construction adds a technical finish that suits performance-focused builds and replacement projects alike. This accessory fits naturally into workshop sessions built around suspension tuning, chassis refreshes and running gear upgrades on 1:10 RC models. Whether the goal is replacing worn shocks or refining the setup for different surfaces, the 55 mm damper format gives hobbyists a concrete component to work with. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, model part, 62 mm
500405864€28.99
Suspension tuning is one of the clearest ways to change how a 1:10 model behaves on the ground, and this Alu Oil Damper Set brings that adjustment into a compact 62 mm format. The set includes 4 matching dampers, combining threaded metal bodies, white coil springs and blue adjustment collars in a layout aimed at hobby-grade chassis setup. Each damper uses an oil-filled design to manage wheel movement with more control than a spring alone can provide. The threaded body gives room to alter preload, which changes how the suspension sits and reacts under load. That makes the set useful when a chassis needs a more even stance, a refreshed suspension feel or a setup better matched to the running surface. The aluminium construction adds a precise mechanical look, while the eyelet mounts follow the familiar format used on many RC suspension assemblies. On a touring chassis, buggy or truck platform in the 1:10 class, a matched 4-piece damper set helps keep front and rear suspension behaviour balanced during acceleration, braking and corner entry. The included adapter parts expand the installation options for compatible layouts, whether the goal is replacing worn dampers or refining a custom setup for regular running sessions. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, RC accessory, 100 mm
500405758€19.49
Suspension tuning shapes how a 1:10 RC chassis settles into corners, absorbs bumps and transfers weight under braking. This aluminium oil damper set brings that adjustment into a compact 100 mm format, with 2 coilover units that combine spring support and oil damping for a more controlled mechanical response. The threaded damper bodies and blue adjustment collars give the setup a clear tuning point for spring preload, so ride height and chassis balance can be matched more closely to the build. Each damper uses black mounting eyelets at both ends for straightforward attachment within compatible suspension layouts. The silver bodies, exposed springs and blue anodised details also make the hardware easy to identify during maintenance or rebuild work. As a replacement or upgrade part, the set suits hobby projects where suspension behaviour matters as much as drive power or tyre choice. On workshop benches, during rebuild sessions or as part of a fresh chassis setup, these 2 dampers add a concrete tuning option to compatible 1:10 model vehicles. They fit naturally into projects focused on handling refinement, service work or a more adjustable suspension layout. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, RC accessory, 85 mm
500405757€19.49
At 1:10 scale, this Alu Oil Damper Set brings metal suspension hardware and tuning potential into RC workshop builds. The 85 mm format and 2-piece set suit model builders looking to replace worn dampers or refine a compatible chassis with oil-filled suspension components. The aluminium bodies pair with coil springs, polished shafts and mounting eyelets in a compact coilover layout. The threaded construction allows spring preload changes directly at the damper, so ride setup can be adjusted to match surface conditions and chassis balance. Oil damping adds a controlled mechanical action between compression and rebound, which helps the suspension settle more cleanly after bumps and direction changes. The included small hardware parts support mounting and setup on compatible model vehicles. Whether the goal is a rebuild, a suspension refresh or a more precise base for further tuning, these dampers fit naturally into hands-on RC maintenance. In a bench setup, the 85 mm length gives a clear reference when matching replacement parts, and on a running model the paired design supports even installation across one axle. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 XS Oidamper Set, model accessory, 82 mm
500405966€18.99
The 1:10 XS Oidamper Set brings a dedicated suspension component to the Carson XS-Chassis platform with 4 oil shocks in an 82 mm format. Built as a model accessory rather than a universal part, the set is specified for a defined group of XS vehicles, making it a focused choice for maintenance or chassis tuning on compatible models. Compatibility is stated for the Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The listed vehicles include Stadium Fighter in blue and orange, Offroad Fighter Cage in turquoise and red, Tekuro in grey green and grey blue, and Ryken in blue and green. With 4 matching dampers in one set, the suspension layout can be equipped with the same damper type at all corners. The oil shock design works through fluid damping inside each unit, where the piston movement through oil helps moderate compression and rebound. That makes the set useful in workshop servicing after wear, in a rebuild of a compatible XS model, or when replacing existing suspension units with the same 82 mm specification. The age marking in the data is 14 years. Batteries are not included.
RC shock absorbers & damper bridges
Akuma Shock Tower Set, RC spare part, 2 pcs
500405982€21.49
The Akuma platform relies on accurately mounted suspension hardware, and this shock tower set brings together the front and rear parts needed for that job in one 2-piece spare set. Shaped for the Akuma model line, the set focuses on a core chassis area where mounting geometry and clean fit matter during repair or rebuild work. The included parts cover front and rear shock tower positions rather than only one end of the vehicle, which helps keep replacement planning straightforward when both mounting areas need attention. Product imagery shows black moulded support parts with ribbed sections and multiple fixing points, paired with silver mounting plates with drilled holes and cut-outs. That combination points to a layout built around direct fastening and alignment with the surrounding chassis hardware. As a dedicated spare part rather than a general accessory, the set is aimed at maintaining the original structure of the model. On the workbench, this kind of component set fits naturally into routine maintenance after heavy running, collision damage or a full strip-down of the chassis. The 14 Years marking places it in the hobby segment, where model builders often keep key replacement parts ready for service intervals and rebuild sessions. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Akuma Steering Linkage, RC spare part, 2-piece
500405979€6.49
The Akuma steering linkage set supplies 2 grey linkage arms for RC vehicle steering assemblies, paired with 2 metal ball studs and 2 white bushings. Each arm has mounting holes at both ends, creating the connection points needed between moving steering components where a pivoting joint is required. The included ball hardware supports the linkage mechanism by allowing the arms to articulate at their mounting points instead of sitting in a fixed position. That movement is essential in steering systems where connected parts need to change angle during operation. The rectangular arm profile with rounded ends matches the technical layout shown for this spare part set, while the paired format provides matching left and right replacement pieces for the same assembly area. With assembly measured in minutes, the set suits routine workshop maintenance, parts replacement, or the refresh of a used RC chassis. In practical use, the linkage set fits repair work after wear, damage, or lost hardware in the steering area. It also serves as a useful stock spare for hobby benches where RC running sessions and regular mechanical upkeep go hand in hand. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
DESERT W. 4X Front Shock Set, RC spare part
500405485€54.99
The DESERT W. 4X Front Shock Set is a dedicated RC spare part for the X10E Desert W. 4x, built around 4 matching coil-over dampers for the front axle. Silver shock bodies, white springs, blue adjustment collars and black lower mounts give the set a clear workshop look while keeping the suspension layout consistent across the vehicle's front end. Each damper combines a spring and shock unit in one assembly, with threaded bodies that support preload adjustment through the collars. That setup gives model-building enthusiasts a practical way to tune the front suspension around the chassis layout and the running surface. Polished shafts and eyelet-style lower mounts point to a conventional RC installation pattern, while the included retainers, screws and lock nuts complete the fastening hardware for the set. In workshop use, the 4-piece layout suits a full front-end refresh on the X10E Desert W. 4x rather than replacing a single worn damper. On loose ground, uneven tracks and jump sections, the assembled shock units support more controlled suspension movement at the front of the vehicle. Age 14 Years Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Drakuro Bumper Braces, RC spare part set
500406036€8.49
The Drakuro Front & rear bumper braces are a model-specific spare part set for the Drakuro 1:8 4WD chassis. Designed for the bumper strut positions at the front and rear, they give RC enthusiasts a direct replacement option for the designated mounting areas on the vehicle. The set is linked in the product data to the Drakuro BL 3S versions in anthracite/red and blue, which helps place these braces within the correct model family. As front and rear components are covered together, workshop planning stays straightforward when both ends of the chassis need matching replacement parts. This kind of model-specific hardware matters when maintaining the structure around the bumper assemblies and keeping the chassis configuration aligned with the intended layout. In the workshop, these braces suit repair jobs after impact damage, routine parts replacement, or the refresh of a heavily used RC vehicle. They also fit rebuild projects where worn bumper struts are exchanged during chassis maintenance, helping return the Drakuro platform to running condition with the correct spare parts category for the model. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Drakuro Bumper Lower Parts, spare part set
500406037€6.49
Drakuro Front & rear bumper lower parts are replacement components for the lower bumper sections of the Drakuro 1:8 4WD chassis. The set is aimed at precise maintenance work where the original lower front and rear bumper areas need to be renewed, keeping the vehicle configuration consistent with the matching chassis layout. Because the data identifies these parts specifically as lower sections, the repair can stay focused on the exact area rather than replacing unrelated assemblies. That makes the set useful for rebuilds, routine servicing, or restoring the bumper structure after running wear. The pairing of front and rear pieces also covers both ends of the chassis in one matching spare parts set, which helps keep the vehicle's setup visually and mechanically consistent. In the workshop, these parts suit planned maintenance as well as direct replacement during a chassis refresh. For hobby benches that keep model-specific spares ready, the set adds a clearly defined Drakuro component for the 1:8 4WD platform. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Drakuro Front & Rear Bumper, spare part
500406035€8.49
The Drakuro Front & rear bumper is a dedicated spare part set for the Carson Drakuro model family. Listed for the 1:8 4WD chassis and the Drakuro BL 3S versions in anthracite/red and blue, it provides the matching bumper components for both ends of the vehicle. Because the set covers front and rear positions together, repair work can focus on the impact areas that see regular contact during RC driving. The bumper layout stays aligned with the named Drakuro platform rather than relying on an unspecified universal part. That makes this set a practical choice for maintenance, rebuilds and parts replacement within the correct model range. The reference to the 1:8 4WD chassis also places the part within the larger Drakuro running gear setup without overstating compatibility beyond the data. In the workshop, this spare part set supports routine servicing after collisions, rollovers or general wear. It also fits restoration work on a used Drakuro BL 3S when both vehicle ends need fresh matching components to bring the chassis back into running condition. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Drakuro Oildamper, shock absorbers, 95 mm
500406064€24.99
The Drakuro Oildamper set brings 95 mm oil-filled shock absorbers to 1:8 4WD chassis maintenance, with 2 dampers supplied as a matched pair for suspension work on compatible Drakuro setups. In RC running, oil dampers shape how the chassis reacts after compression, helping the suspension return with more control than an undamped spring alone. This set is aimed at the suspension area rather than general drivetrain service, so it fits naturally into rebuilds, wear replacement, or planned setup changes on a 1:8 platform. The 95 mm length is the key workshop reference when checking compatibility against the existing installation. Because 2 pieces are included, the pair suits one axle end in a typical left-right arrangement, which matters when keeping damping hardware even across the chassis. The designation in the data links the set to the Drakuro line, giving model-building enthusiasts a direct spare part option for that series. On the bench, the pair can be used when a damaged damper needs replacing after hard running, or when an existing suspension set is being refreshed to restore a balanced response. For hobbyists maintaining a 1:8 4WD model, a correctly sized damper pair is a practical part to keep alongside other running gear spares between track sessions.
RC shock absorbers & damper bridges
Drakuro Shock Towers, front and rear chassis parts
500406038€16.99
The Drakuro BL 3S uses a 1:8 4WD chassis layout, and these front and rear shock towers are the matching chassis parts for that platform. They provide the mounting points for the dampers at both ends, making them a focused choice for repair work, scheduled maintenance, or a rebuild based on the named Drakuro setup. Because the set covers both front and rear positions, the suspension mounting structure can be renewed as a pair rather than sourced piece by piece. That keeps workshop planning straightforward when the goal is to restore the chassis hardware around the damper installation points. The product data identifies the parts specifically as shock towers for the Drakuro range, with fitment tied to the 1:8 4WD chassis and the Drakuro BL 3S references listed there. For hobby benches that stay organised by platform, that clear model link matters when selecting replacement hardware. These parts fit naturally into service scenarios such as replacing worn mounting components, preparing spares before track use, or refreshing a chassis during a larger maintenance session. In each case, the role stays precise: front and rear damper mounting points for the Drakuro platform, supplied as dedicated chassis parts rather than general accessories. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
KoD Oil Shocks-kit, RC shock set, 4 dampers
500405914€59.99
The KoD Oil Shocks-kit brings a complete 4-piece damper set into RC suspension tuning, with silver shock bodies, white springs and blue top caps creating a technical look that fits straight into a workshop-focused build. Designed as an oil shock set, it gives compatible models a concrete suspension component for maintenance, replacement or setup changes. Alongside the 4 assembled shocks, the set contains spring clips on sprues, black cap parts, bushings, long screws, hex nuts and silver washers. Those extra parts support the mounting process and expand the setup options around each damper position. The preload clips are especially useful where suspension height or spring tension needs a more exact adjustment than a fixed standard setup allows. With 115/130 mm named in the product data, the set also carries a clear size reference for matching to the intended application. In use, this kind of shock set suits rebuilds after wear, fresh chassis projects and targeted suspension updates on compatible RC vehicles. The included hardware keeps the focus on fitting and tuning the dampers themselves, whether the goal is restoring a running model or refining its suspension response for the next session.
RC shock absorbers & damper bridges
KoD Shock Towers Set, RC spare part, front rear
500405886€38.99
The KoD platform uses separate front and rear shock towers to anchor key suspension points, and this set supplies both parts in a matching metal layout for a direct chassis-focused replacement. The precision-cut plates show a drilled pattern with several upper and central mounting positions, giving model-building enthusiasts a clear basis for setup work on the suspension. Each tower is shaped for its own position on the vehicle, with angled upper sections, internal cutouts and rounded lower mounting tabs that reflect the different demands at the front and rear. The hole arrays allow damper attachment points to be moved within the provided pattern, which can change leverage and the suspension response in a controlled, mechanical way. The metal construction adds a firm connection point for shocks and linked hardware, while the machined openings keep the parts visually clean and technically focused. As a spare part for the KoD range, the set suits repair work after wear as well as workshop-led tuning sessions built around chassis geometry. On the bench, the pair supports a methodical rebuild with both ends of the suspension brought back into line through matching hardware. At the track, the available mounting positions give scope to adapt the setup to surface grip and driving style through concrete changes at the shock mounting points.
RC shock absorbers & damper bridges
Virus 4.0 Alu Shocks-Kit V/H, shock set
500205937€59.99
The Virus 4.0 Alu Shocks-Kit V/H brings 4 coilover dampers into one suspension set for front and rear fitment on the Virus 4.0. Aluminium shock bodies, red anodized caps, white springs and black mounting sections give the assembly a technical, competition-inspired look while placing the key suspension parts in a clearly readable layout. Alongside the dampers, the set contains black clip parts on 2 sprues, small bushings, 4 metal washers, screws, ball ends and nuts for installation. The coilover design combines the spring and damper in a single unit, supporting controlled suspension travel where the chassis meets ruts, jumps and uneven ground. Ball-ended mounting points help the shocks sit correctly through suspension movement, while the included small hardware keeps the fitting process focused on the damper conversion itself. On the bench, the set suits a worn suspension refresh or a planned chassis rebuild with matching front and rear units. Once installed on a Virus 4.0, the 4 dampers form a complete suspension package for running sessions that call for consistent wheel control across changing surfaces. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Virus 4.0 Shock Towers, RC spare part, front rear
500205948€37.99
The Virus 4.0 uses separate front and rear shock towers to anchor the dampers at each end of the chassis, and this 2-piece spare part set restores those mounting points with matching replacement plates. The parts are shaped specifically for the front and rear positions, so the geometry follows the layout intended for the model rather than a one-size-fits-all solution. Each tower shows a machined metal form with a brushed surface, rounded edges and weight-saving cutouts through the centre section. The larger plate and the smaller plate differ in outline and drilling pattern, reflecting the different demands of the front and rear assembly areas. Several upper mounting holes provide clearly spaced attachment positions for the dampers, while additional centre and lower holes handle the chassis connection. This layout supports careful rebuild work after damage and also leaves room for setup changes within the original mounting pattern. In workshop use, these towers suit maintenance after heavy running, jump landings or contact that has bent the original parts. They also fit a planned refresh when a Virus 4.0 chassis is being stripped and rebuilt with fresh hardware. 14 Years marks the recommended age. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Virus-Ex Alushocks-kit, spare part, 110/125mm
500405946€59.99
The Virus-Ex Alushocks-kit brings a full 4-piece damper set to the Virus Extrem platform, combining aluminium shock bodies with 2 different lengths of 110 mm and 125 mm for a front and rear suspension layout. Silver-grey bodies, white springs and red lower mounts give the assembly a purposeful RC look while the coilover design centres the setup around spring support and damping action. Alongside the 4 assembled shocks, the set includes mounting hardware such as screws, nuts, washers and bushings for fitting the dampers to the chassis. The 2 longer and 2 shorter units suit a staggered suspension arrangement, which is typical where front and rear positions need different dimensions. The metal-bodied construction adds a clear technical character to the running gear, and the included small parts support a direct replacement job without guessing the required fixing pieces. Fitment is stated for Virus Extrem references 500409074 and 500409084, making the set a focused spare part for keeping that RC vehicle platform equipped with matching suspension components. In workshop use, the kit suits rebuilds after wear, damaged damper replacement, or a fresh suspension refresh built around the specified 110 mm and 125 mm shock lengths. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
X 10 EB DirtWarrior, shock set, front rear
500405342€45.99
The X 10 EB DirtWarrior shock set brings the suspension hardware for a complete front and rear damper replacement into one 4-piece pack. Each assembled coilover-style damper combines a silver shock body, a white spring, a blue adjustment cap and collar, and a black lower eyelet mount, creating a clearly structured setup for RC maintenance and chassis tuning. The set includes 2 longer dampers and 2 shorter dampers, matching the different front and rear positions used on the model. Threaded preload collars make it possible to alter spring tension at each corner, which helps adapt suspension response and ride height to the surface and the running setup. Additional mounting hardware is included, with screws and small fitting parts for attachment to the suspension points. This replacement set suits workshop use, routine servicing and rebuilds after heavy off-road sessions. On a buggy that sees repeated jumps, rough landings and loose terrain, fresh dampers and correctly matched front and rear lengths help restore controlled wheel travel and a more consistent chassis response. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
X10EB Shock Tower Gearbox Parts Set
500405346€16.99
The X10EB Shock Tower Gearbox Parts Set brings together several fit-critical replacement components for the Carson X10EB platform in one pack. The set shown includes 2 shock tower style plates with multiple mounting holes, 4 gearbox or bulkhead housing halves, 2 side brace or suspension-related parts, 1 small linkage component, 1 cap and a set of black screws, giving model-building enthusiasts the core pieces needed for targeted chassis repair. The shock tower plates handle mounting duties for the damper area, where hole position matters for restoring the original suspension layout. Around the drivetrain section, the gearbox housing parts provide the structural shells that hold the assembly in place and reconnect adjoining chassis elements. The included screws match the pictured components, which helps keep installation aligned with the replacement parts in the set. The black moulded parts suit rebuilds where damaged, worn or missing originals need to be exchanged with the correct component group rather than improvised substitutes. This set fits workshop use after heavy running, awkward landings or general wear on the X10EB. It also suits planned maintenance when the suspension and gearbox area is already apart, allowing the relevant sections to be refreshed with the matching parts shown. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
XL Shock absorber, model accessory, 82 mm
500405997€21.99
Suspension tuning shapes how an RC vehicle settles, rolls and tracks through a run, and this XL Shock absorber set brings that focus to the 1:10 XL chassis with 4 oil-filled units at 82 mm length. The set is built as a dedicated model accessory rather than a universal part, keeping the specification tied to the intended platform. Oil damping gives the shock absorbers a defined working principle: movement is controlled through fluid resistance inside each unit, helping the chassis react in a more measured way than a simple sprung setup alone. With 4 matching dampers in one set, front and rear can be equipped as a complete replacement group instead of mixing different wear states or lengths. The stated plastic construction keeps the material specification clear for rebuild planning and parts matching within an existing RC setup. In workshop use, the set fits naturally into maintenance jobs, suspension refreshes and chassis rebuilds on the 1:10 XL platform. It also suits hobby bench stock where a dedicated replacement set for a known vehicle layout saves guesswork when worn dampers need to be exchanged.
RC shock absorbers & damper bridges
XS Bumper Wing Holder Gearbox Set for 1:10
500405923€17.79
Built for the 1:10 XS-Chassis platform, this spare parts set brings together front and rear bumper parts, a gearbox section and wing holder components in one pack for targeted maintenance. It fits the Carson Modelsport chassis used in 500404252 Stadium Fighter blue, 500404253 Stadium Fighter orange, 500404254 Offroad Fighter Cage turquoise and 500404255 Offroad Fighter Cage red. The black moulded parts show the structural details needed for chassis work, including ribbed reinforcement, shaped brackets, screw holes and formed mounting sections. These features support the original connection points on the XS-Chassis and help replace worn or damaged hardware with matching geometry. For hobbyists maintaining an RC vehicle after repeated off-road use, the set covers several key structural areas in one step instead of sourcing each section separately. Workshop use stays straightforward because the parts are matched to a defined chassis family rather than a broad universal fit. The set suits rebuilds, repairs after impacts and routine parts replacement on compatible XS-Chassis vehicles, keeping the mechanical layout consistent with the original platform.
RC shock absorbers & damper bridges
1:10 XS Oil Shocks-kit, shock set, 82 mm
500405938soon available again
Built for the 1:10 XS-Chassis platform, the XS Oil Shocks-kit brings a fresh suspension setup to compatible Carson models with 4 matching dampers at 82 mm. The black shock bodies, silver piston rods and red coil springs give the running gear a technical, competition-inspired look while supporting controlled wheel movement over uneven ground. This set is intended for the Carson XS-Chassis references 500404252, 500404253, 500404254 and 500404255. Oil-filled dampers use the movement of the piston rod inside the shock body to manage compression and rebound, so the suspension reacts with more control when the model crosses rough sections, settles after a landing or tracks through loose terrain. With 4 matching units in one pack, front and rear suspension can be equipped as a complete set rather than mixing different wear states or spring responses. On a Stadium Fighter or Offroad Fighter Cage, replacement shocks like these suit workshop maintenance, rebuilds after heavy running sessions or a planned refresh of the chassis setup. The 14 years marking is stated in the product data. As a spare and tuning part for the XS platform, the set focuses on one of the key working areas of an RC vehicle: the suspension that keeps the tyres following the ground.
RC shock absorbers & damper bridges
Akuma Oil Damper Set, RC shock absorbers
500405980soon available again
Suspension tuning changes how a model vehicle reacts long before the motor reaches full speed, and the Akuma Oil Damper Set brings that adjustment to a visible, mechanical level. The set includes 4 shock absorbers in a 100/130 mm format, each built with a yellow coil spring, a dark damper body, a silver upper cap and a chrome piston shaft for a clear motorsport look on compatible RC chassis. The oil-filled damper design works through the movement of the piston shaft inside the body, while the spring supports rebound and ride height at the mounting points. Separate upper cover pieces are included, along with 4 bushings, 4 long screws, 4 locknuts and 4 white spacers arranged for fitting and setup work. This combination makes the set suitable for replacing worn suspension units or equipping a chassis with a matched 4-corner damper layout. The assembled format keeps the focus on installation and tuning rather than sourcing individual suspension parts. On the bench, the set suits rebuilds, maintenance and handling upgrades for model vehicles that use this shock size. Once fitted, the 4 dampers support a more controlled suspension response across rough track sections, jumps and uneven surfaces, with the visual detail of exposed springs and metal-look shafts adding to the technical character. Age 14+ Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Alu damper 75 mm, RC damper set for 1:10
500405755soon available again
Suspension tuning plays a central role in how a 1:10 RC chassis settles, rolls and tracks through corners, and this aluminium damper set brings that adjustment point into a compact 75 mm format. The set contains 2 dampers with coil-over springs and a metal construction that suits replacement work, rebuilds and workshop-led setup changes on compatible models. The dampers use threaded aluminium bodies, allowing the spring preload to be altered directly on the unit rather than through fixed-position parts alone. That layout helps when ride height and suspension response need to be matched more closely to the chassis setup already in use. The eyelet mounting points at the upper and lower ends follow a familiar RC suspension format, giving each damper a clear mechanical role between chassis and suspension arm. The included scale reference of 1:10 places the set within a widely used model category, where exact component length and mounting style are central to fitment. In practice, a pair like this suits maintenance benches, parts boxes and planned suspension updates on RC cars that use compatible 75 mm dampers. Whether replacing worn units or refining a running setup, the 2-piece configuration supports axle-based installation and keeps the focus on controlled suspension movement rather than improvised parts matching.
RC shock absorbers & damper bridges
Virus-Ex Shock Towers, RC spare parts, front rear
500405953soon available again
The Virus-Ex uses front and rear shock towers as key suspension mounting parts, and this 2-piece set supplies both plates for that role. Machined metal construction and the drilled tower layout give the chassis the defined fixing points needed for damper installation and suspension geometry on the vehicle. The smaller front plate and larger rear plate each carry multiple mounting holes across the upper sections, creating several concrete damper attachment positions. Those hole patterns support setup changes through the mounting location itself, which can alter the suspension response of the Virus-Ex. The plates also feature central cutouts and lower fixing holes that suit their role as structural chassis hardware rather than decorative trim. As replacement parts, they restore the original mounting area when existing towers are bent, worn or missing. In workshop use, these towers fit naturally into rebuilds, maintenance work or suspension tuning on a Virus-Ex platform. The set suits hobby bench stock where front and rear chassis hardware is kept ready for repairs after hard running sessions. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 Damper Set (4)
500405780only available from customer service
500405780 Carson 1:10 shock absorber set (4) offers four shock absorbers for 1:10 model vehicles and is aimed at model building enthusiasts who want to replace or renew suspension components. The compact set supports maintenance and repair and helps to reliably restore the usual damping function of your model.
RC shock absorbers & damper bridges
DNA Shocktower Set
500405697only available from customer service
Carson DNA Shocktower Set 500405697 is a shocktower set from Carson for model building applications. As a specially designated accessory in the model accessories range, it is aimed at enthusiasts who rely on suitable parts for maintaining, replacing or upgrading their models. As part of the Carson range of model accessories, it supplements the model supply.
RC shock absorbers & damper bridges
FY10 Destroyer Brace
500405289only available from customer service
Carson FY10 Destroyer Brace (500405289) is a kit for modelers. This kit allows the Destroyer Brace to be built independently and is aimed at enthusiasts who appreciate detailed craftsmanship and individual design. Ideal for the targeted expansion or repair of models. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
FY10 Shock Absorber-Set, 2 pcs
500405290only available from customer service
Carson FY10 shock absorber set 500405290 is a two-piece kit with two shock absorbers for DESTROYER and DFFY in 1/10 scale. Model builders receive a suitable spare parts package for repair, maintenance or replacement of their 1/10 scale models and ensure the operational readiness of the vehicle. Ideal for enthusiasts looking for original parts. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
FY8 Shock Absorber Unit (2)
500405312only available from customer service
Carson FY8 shock absorber unit 500405312 in a kit of 2 is an original spare part for the 1:8 scale models DESTROYER and DFFY. The two units supplied are specially designed for these vehicles and enable uncomplicated replacement to repair the chassis - ideal for model building enthusiasts. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
KOD Shok towers set front /real
500405921only available from customer service
Carson 500405921 KoD Shok Towers Set Front (real) is a spare part for 1:8 KoD cage models: two shock towers, intended for faithful restoration or upgrading. The parts facilitate installation and are compatible with the parts 500202021 and 500409064. Perfect for model builders who are looking for precise spare parts for their 1:8 scale models.
RC shock absorbers & damper bridges
Oil shock absorber set (2) CV- 10B, rear
500105162only available from customer service
Carson oil shock absorber set 500105162 for CV-10B (rear, 2 pieces) is the perfect replacement solution for the rear axle of your model. The set makes it easy to replace defective shock absorbers, restores the damping effect and ensures controlled handling. Model building enthusiasts appreciate the quick installation and reliability. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Oil shock absorber set (2) CV-10B, front
500105163only available from customer service
Carson oil shock absorber set 500105163 for front (2x) - specially designed for the CV-10B. This shock absorber set provides precisely tuned replacements for the front axle and is ideal for replacing damaged or worn parts. Model builders appreciate the precision-fit solution to restore handling and reliability.
RC shock absorbers & damper bridges
Shock absorber set (2) CV-10
500105126only available from customer service
500105126 - Carson CV-10 shock absorber set (2): This set contains two CV-10 shock absorbers and is aimed at model building enthusiasts who are looking for suitable accessories for their CV-10 projects. Brand quality from Carson in a compact design, ideal as a targeted addition or replacement part for your model. Perfect for CV-10 fans.
RC shock absorbers & damper bridges
Shock tower front/ rear (2)
500105171only available from customer service
Carson shock absorber carrier 500105171 for front and rear (2) is an original spare part for buggy and truggy. As a shock absorber carrier, it allows the targeted replacement of damaged parts and the restoration of the suspension function. Model builders appreciate the simple installation and precise fit. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Shock tower set CV/CE-10, tightend
500405144only available from customer service
Carson Shock-Tower-Set CV/CE-10 (500405144) is the tight-end kit for demanding model builders who want to specifically maintain or optimize their CV/CE-10. The set includes the matching shock tower mounts for the CV/CE-10 and is aimed at enthusiasts who prefer original spare parts. Ideal for CV/CE-10 models. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Shock tower set f/r (2) CV-10
500105139only available from customer service
Carson CV-10 shock absorber bridge set (500105139) includes the two parts for the front and rear (2 pieces) and fits the CV-10. For model building enthusiasts, this set offers a practical solution for replacing or upgrading the shock absorber mounts so that the CV-10 can be specifically repaired or modified. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Shocktower set front/rear CV-10 On-Road
500105289only available from customer service
Carson Shocktower Set 500105289 for CV-10 On-Road brings front and rear mounts in original form and is aimed at model builders who demand precision and reliable spare parts. The precisely fitting components facilitate maintenance and repair, maintain chassis geometry and performance and are ideal for exact restoration. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
V4 Truggy Damper Set (4)
500405820only available from customer service
Carson V4 Truggy Damper Set 500405820 presents itself as a damper set (4 pieces) from Carson, intended as a replacement and accessory part for remote-controlled, powered ground vehicles. Model building enthusiasts and tuning fans use it for maintenance, repair or individual setup; the material number facilitates ordering and allocation in the accessories range.
RC shock absorbers & damper bridges
V4 Truggy Shock Tower Set
500405810only available from customer service
500405810 Carson V4 Truggy Shock Tower Set is a spare part for model builders who want to repair or upgrade their V4 Truggy. The set provides precisely fitting supports for the shock absorbers of the truggy and is aimed at enthusiasts who appreciate quality and original accessories. Perfect for ambitious model builders.
RC shock absorbers & damper bridges
X-Crawlee pro Shockabsorbers (2)
500405616only available from customer service
Carson X-Crawlee Pro shock absorbers 500405616 (2) are original replacement shock absorbers from Carson for X-Crawlee Pro models. The set includes two shock absorbers and is aimed at model builders who need precisely fitting parts for the X-Crawlee Pro series. Suitable for replacement on the chassis and for restoring the standard condition. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
X10E Dessert W. Shock Tower
500405486only available from customer service
Carson X10E Dessert W. Shock Tower 500405486 is the original spare part for X10E models and is referred to as DESERT W. SHOCK TOWER. Especially for model building enthusiasts, it serves as a clearly identified component when replacing parts or as a stock part for targeted maintenance and care of your Carson model. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
X10EB Shockabsorbers Set
500405673only available from customer service
Carson X10EB shock absorber set 500405673 is the right spare part for the Stunt Warrior. Model building enthusiasts looking for original compatible components will find a targeted selection here. The shock absorber set makes it easier to identify the required component and creates confidence when ordering, repairing and maintaining your model.
RC shock absorbers & damper bridges
X10EB Shocktower Bodyholder Set
500405667only available from customer service
500405667 X10EB Shocktower Bodyholder Set from Carson is aimed at model builders who want to repair, rebuild or modify their Stunt Warrior. This set is suitable for Stunt Warrior and contains the necessary parts to complete the model. As a set specially designed for the X10EB product line, it is suitable for specific repairs and conversions. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
X10ET RockWarrior Front/Rear Shock Set,4
500405414only available from customer service
500405414 X10ET RockWarrior Front/Rear Shock Set (4) from Carson offers model building enthusiasts four shock absorbers for the front and rear axle of the X10 EB / Rock Warrior. The 4-piece set makes it easy to replace or upgrade suspension components and is ideal for maintaining and upgrading your X10 models. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
X10ET-XL Shockabsorber F/R
500405655only available from customer service
Carson X10ET-XL shock absorbers F/R (500405655) combine brand quality with a clear replacement function for model builders: designed as front and rear shock absorbers, they are specifically named for replacement in the vehicle body. Model building enthusiasts appreciate the brand-appropriate solution for maintenance, repair and targeted conversion.
