Replacement & spares for combustion engine models
Keep your model in top shape – with robust spare and accessory parts for nitro models. Whether maintenance or repair: find everything you need for long-lasting performance.
Replacement & spares for combustion engine models
Keep your model in top shape – with robust spare and accessory parts for nitro models. Whether maintenance or repair: find everything you need for long-lasting performance.
More
Replacement & spares for combustion models
1:10 CV10 Masterfix, tuned pipe set
500905070€37.99
A tuned exhaust layout is a classic upgrade path in nitro RC, and the CV10 Masterfix tuned pipe set brings that focus into a 1:10 format with a chrome finish and a complete group of matching exhaust parts. The set is built around a large polished muffler with a side outlet and a separate curved metal header, creating the basis for a clean engine-to-pipe connection on compatible nitro models. Alongside the two main metal sections, the set includes a coupler, a black rubber exhaust adapter, a green gasket, 2 long screws, 2 nuts, 3 tension springs and a small set screw. That combination supports both replacement work and a fresh exhaust installation where the joining points and mounting hardware need to match the pipe layout shown. The mounting flange on the header gives a defined engine connection point, while the spring-secured sections reflect the typical construction used on model nitro exhaust systems. The chrome finish adds a bright mechanical look that stands out clearly on a chassis. In workshop use, the set suits hobby builds that need a complete exhaust assembly rather than a single spare part. On a finished 1:10 nitro model, the separate header, coupler and muffler arrangement creates a purposeful technical appearance around the engine area. 14 Years marks the recommended age. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
1:8 Masterfix tuned pipe set, exhaust system
500905071€39.99
Built around the classic layout of a tuned nitro exhaust, the 1:8 Masterfix tuned pipe set brings a chrome-finish exhaust system to RC car builds that use a separate header and resonator chamber. The polished metal surfaces, bulb-shaped pipe body and angled rear outlet give the assembly a purposeful competition look on the chassis. The set is configured as a 2-piece exhaust arrangement with a curved header pipe and a main muffler section joined by a spring-retained coupling. A sealing ring sits at the connection point, and a pressure nipple is mounted on top of the chamber for the fuel-pressure line used on nitro layouts. These details make the assembly easy to place and route within a 1:8 vehicle build while keeping the pipe geometry clear and compact. The chrome finish also makes the exhaust stand out against anodised alloy parts, dark chassis plates and body cut-outs. Mounted on a 1:8 nitro RC car, the exhaust adds the visual character associated with tuned engine setups, whether the build is being refreshed with replacement parts or assembled with a more focused racing style. Age marking: 14 Years. Warning! Not suitable for children under 14 years.
RC tires & rims
Alu Hex Hub 17 mm, RC wheel hub set
500405896€13.49
Small drivetrain parts can make a decisive difference in an RC build, and this Alu Hex Hub set brings a clear mechanical upgrade point with 17 mm wheel mounting hardware. The set includes 2 blue anodized aluminium hub adapters with a hexagonal base and threaded body, giving model builders a defined interface for wheel fitment and axle connection. Each adapter is paired with a matching hex nut, while the included silver pins and black set screws complete the fastening hardware for installation. The hollow cylindrical opening and side hole shown on the hub design indicate a locking layout built around pin retention and screw fixing rather than a simple push fit. That construction supports controlled assembly work when worn parts need replacing or a compatible setup is being refreshed. With 2 hubs in the pack, the set is suited to targeted repair work on one axle position. On the workbench, the compact format keeps the focus on accurate fitting, clean fastening, and dependable mechanical engagement between axle and wheel mount. The 14 years+ age marking places the set in the hobby segment, where tuning, maintenance, and parts changes are part of the hands-on appeal of RC model ownership.
RC shock absorbers & damper bridges
KoD Shock Towers Set, RC spare part, front rear
500405886€38.99
The KoD platform uses separate front and rear shock towers to anchor key suspension points, and this set supplies both parts in a matching metal layout for a direct chassis-focused replacement. The precision-cut plates show a drilled pattern with several upper and central mounting positions, giving model-building enthusiasts a clear basis for setup work on the suspension. Each tower is shaped for its own position on the vehicle, with angled upper sections, internal cutouts and rounded lower mounting tabs that reflect the different demands at the front and rear. The hole arrays allow damper attachment points to be moved within the provided pattern, which can change leverage and the suspension response in a controlled, mechanical way. The metal construction adds a firm connection point for shocks and linked hardware, while the machined openings keep the parts visually clean and technically focused. As a spare part for the KoD range, the set suits repair work after wear as well as workshop-led tuning sessions built around chassis geometry. On the bench, the pair supports a methodical rebuild with both ends of the suspension brought back into line through matching hardware. At the track, the available mounting positions give scope to adapt the setup to surface grip and driving style through concrete changes at the shock mounting points.
Replacement & spares for combustion models
Virus 4.0 Clutch-Kit, clutch set for RC models
500205956€37.99
The Virus 4.0 Clutch-Kit complete brings the central clutch assembly for Carson Modelsport maintenance together in one set. With the clutch bell, red carrier, 3 clutch shoes, 3 springs, 2 ball bearings, nut, screw, washers and collet, the set covers the key parts involved where engine drive is passed into the drivetrain. The mechanism is easy to follow in the laid-out parts: the clutch shoes mount on the carrier, the springs control their movement, and the clutch bell receives the drive once the assembly engages under engine speed. The 2 bearings support the rotating section, while the washers, nut and screw secure the assembly in place. This makes the set useful for replacing worn clutch components with matching parts rather than sourcing each piece separately. The combination of small hardware and drive elements keeps the focus on the clutch zone itself, which matters during routine service and drivetrain refresh work. On the bench, the set suits rebuilds, repairs and planned maintenance on the Virus 4.0. It also fits hobby setups where the clutch assembly is being renewed as part of engine or drivetrain service, with each included part contributing to the complete clutch mechanism. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
Virus Akuma Pivot Ball Set, front spare part
500205961€14.49
Small chassis parts keep an RC model precise where movement and mounting meet, and this front Pivot Ball Set is made for exactly that task on selected Carson platforms. Designed for Virus 4.0, 4.1, 4.2, 4.3, Race and Akuma vehicles, it provides the front hardware group needed when worn or missing pivot components interrupt the assembly. The visible set consists of 6 parts: 2 black ball studs with threaded shafts, 2 silver threaded caps with hex socket centres and 2 black ring bushings. That combination points to a front joint or linkage mounting where a threaded fixing, a retained seat and a pivoting contact point work together in one compact area. As a model spare part, the set is suited to maintenance work that restores the intended connection at the front end rather than improvising with unmatched hardware. The compact format also makes it practical to keep in workshop storage alongside other chassis service parts. In regular hobby use, front suspension or steering assemblies are often the first places where small wear parts matter, especially after repeated running sessions and rebuilds. This set supports direct replacement on the named Virus and Akuma series so the front assembly can be rebuilt with matching components and the model returned to service with the correct hardware group. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
Fuel Bottle 300 ml, model supplies applicator
500905078€6.69
A 300 ml fuel bottle brings controlled liquid transfer to model workshop routines, with a squeeze format that supports quick handling and a long angled nozzle that reaches tank openings with less repositioning. The translucent bottle body keeps the fill level visible during preparation, while the narrow metal outlet is shaped for targeted flow where broad pouring would be awkward. The bent dispensing tube is suited to model supplies use in compact areas around a chassis, especially where surrounding parts leave little room for a wider container. A black protective cap closes the tip between sessions, helping keep the outlet covered during transport in a pit bag or storage in a tool case. The bottle itself is a dedicated accessory rather than a general container, built around accurate transfer of liquid through a fine outlet and a hand-operated squeeze body. With the 300 ml capacity, fewer refills interrupt maintenance or trackside preparation. On the bench, in the workshop, or at the circuit, this accessory supports clean, direct filling as part of regular model care. The simple bottle, nozzle and cap layout keeps the handling focused on the task, whether preparing a vehicle before a run or topping up between sessions. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
Nitroset incl. USB charger, tool set, 14+
500905128€34.49
Nitroset incl. USB charger gathers the core workshop gear for nitro-powered model driving into one practical set for ages 14+. The combination of a 500 ml fuel bottle, dedicated glow equipment and hand tools supports regular preparation, refuelling and trackside maintenance around combustion engine models. At the centre of the set is a glow plug connector with a 2000 mAh NiMH rechargeable battery, paired with a USB charger for repeated use. The charger data names a 350 mA charging current, 0.4 W output, 1-cell 1.2 V NiMH format and an 8 h charging time for the 2000 mA battery pack. Alongside it, the glow plug spanner covers SW 8, 9, 10, 12 and 17, while the wheel nut spanner handles SW 4, 4.5, 5.5 and 7. A cross-head screwdriver and a slotted screwdriver complete the set for fastening and adjustment work. Whether the task is filling the tank before a run, changing a glow plug after use or tightening wheel hardware between sessions, the set keeps the key tools close at hand. The data states compatibility with combustion vehicles on the market, making it a straightforward equipment set for hobby bench use and race-day support.
Replacement & spares for combustion models
Universal Wrench Tool for Model Workshop Use
500905065€6.79
A universal wrench belongs in any well-organised model workshop, and this cross-shaped tool brings several turning functions together in one compact metal format. The polished finish and 4-way layout create a clear, practical hand tool for adjustment, maintenance and general bench work around model equipment. Each arm provides a different end, while the centre adds a hex opening for another handling option. That combination supports quick changes between fittings without reaching for a separate tool each time. The metal body gives the wrench a direct, controlled feel in the hand, and the compact shape sits neatly in a toolbox, drawer or workshop tray between service sessions. Rather than taking up space with single-purpose tools, this format keeps several common functions grouped in one place. On the model bench, the wrench suits routine setup work, small maintenance tasks and general workshop organisation. It also works well as a handy spare in a field box or service kit, ready for the moments when a simple turning tool keeps work moving without interruption. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
1:8 Airfilter Foam, model accessory, 2-pack
500905118soon available again
In 1:8 model running, the air filter is one of the small parts that has a direct effect on how cleanly the engine can breathe. This set provides 2 cylindrical foam airfilter inserts with a central opening, made to fit the matching filter layout used on 1:8 models and to restore the intake with fresh filter material. The foam structure is porous, so incoming air can pass through while dirt and dust are held back before they reach the engine's internal components. The hollow centre supports mounting onto the corresponding filter core, and the rounded cylindrical form matches the compact shape commonly used around model engine intake systems. As a replacement accessory, the set is aimed at routine upkeep rather than conversion work, making it a practical addition to workshop supplies for nitro model maintenance. The pack contains 2 inserts, which is useful when one filter is already in service and another fresh element is needed for the next change. On dusty off-road tracks, practice areas, or race-day pit tables, fresh foam inserts help keep maintenance intervals organised and the intake system properly equipped. The 14 years and up marking is stated for the accessory, and the compact format stores easily alongside other service parts for regular model care.
Replacement & spares for combustion models
Virus 4.0 Fuel Tank, model spare part
500205962soon available again
Built for Carson Modelsport Virus and KoD applications, the Virus 4.0 Fuel Tank serves as a dedicated replacement reservoir for model fuel systems. The semi-transparent tank body, black cap assembly and brass connector give this spare part the key elements needed for controlled fuel storage and transfer inside a nitro-powered setup. Its moulded shape is designed for installation as an onboard tank, with side mounting posts that position the reservoir within the chassis layout. The cap section allows the tank to be opened for refilling, while the brass outlet or inlet nozzle connects to fuel tubing as part of the engine supply line. The stepped tank form and integrated supports reflect the compact packaging needed in RC vehicle layouts where space, routing and component fit all matter. As a replacement part, this tank suits maintenance work on an existing model and helps restore the original fuel path when a worn or damaged reservoir needs to be exchanged. The clearly defined fittings and mounting structure support a straightforward swap within the intended compatible platform. Age marking: 14 years. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
1:8 Air Filter Set, CY-2 Chassis
500205493available in stores
Carson 1:8 air filter set CY-2 Chassis (500205493) is a black, three-part spare parts package specially designed for 1:8 models. The foam insert can be replaced, making maintenance and service life of the filter easier. Precisely manufactured for ambitious model builders who value care and reliability. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
23/27ccm glow plug short NGK CMR 7H
500903215only available from customer service
The Carson 500903215 NGK CMR 7H short glow plug for 23/27 cc engines is an exact replacement for part numbers 32730 and 32588. Model building enthusiasts benefit from simple installation and reliable operation; the short design enables seamless integration into typical designs and facilitates maintenance and replacement.
Replacement & spares for combustion models
Brake set (complete incl. parts) CV-10
500105118only available from customer service
500105118 Brake set CV-10 from Carson is a complete brake set including all parts for the CV-10. Model building enthusiasts and hobbyists receive a complete spare parts package for replacing or repairing the CV-10 and can maintain their model in a targeted manner. A practical complete package from Carson for all those who rely on original parts for the CV-10 and value complete parts equipment. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
Bumper front / rear Stormracer
500105291only available from customer service
Carson Bumper front/rear Stormracer 500105291 offers the right solution as a replacement part for the front and rear bumper on the Stormracer. Identifies itself as a replacement for the part number 500105165 and is aimed at model building enthusiasts who want to maintain or repair their Stormracer true to the original; an uncomplicated replacement offer for targeted repairs. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
CY5 Front Bumper Holder
500405459only available from customer service
The 500405459 CY5 Front Bumper Holder from Carson is the right spare part for CY5 models and serves as a holder for the front bumper. Model building enthusiasts appreciate such original components to replace damaged front parts and restore the aesthetics and function of their vehicle.
Replacement & spares for combustion models
Engine support (2) CV-10
500105145only available from customer service
Carson 500105145 Motor mounts (2) for CV-10 offer a practical spare parts set for securely mounting the motor in CV-10 models. Precisely manufactured for accurate fitting, they enable uncomplicated replacement and restoration of the driving function. A must-have for model builders who value originality and reliability.
Replacement & spares for combustion models
Force One Way Bearing
500054550only available from customer service
The Carson Force One Way Bearing 500054550 is an original Force sprag roller freewheel for model making. This precise spare part ensures directional rotation and is aimed at enthusiasts who use original components to repair, maintain or precisely restore their models. The material number ensures clear interchangeability. Warning! Not suitable for children under 14 years.
Axles & drive shafts
KOD Anti roll bar front
500405891only available from customer service
Carson KoD front stabilizer set 500405891 is the precisely fitting anti-tip stabilizer set for KoD models and was designed for precise tuning of the front axle. Specially manufactured, it fits the 500202020 and 500409063 models and is suitable for both repairs and targeted tuning adjustments.
Axles & drive shafts
KOD Anti roll bar rear
500405901only available from customer service
Carson KOD rear stabilizer bar set 500405901 is the original rear stabilizer bar set for KOD models and fits vehicles with the model numbers 500202020 and 500409063. Model builders appreciate the precisely fitting solution for precise repairs or targeted retrofitting of the chassis. Ideal as a spare part or upgrade for maintenance and repair.
RC chassis & attachments
KoD Chassis brace set / Body -mount
500405920only available from customer service
500405920 - Carson KoD Chassis brace set / Body-mount: Two-piece KoD Cage body mounts for 1/8th scale models, supplied as a pair and intended as an original spare part for the 500202021 and 500409064 models. Precision manufactured for a snug fit, they ensure a stable body mount and improve handling and reliability - a must for model building enthusiasts.
Replacement & spares for combustion models
KOD GP Brake Caliper
500205987only available from customer service
The Carson KOD GP Brake Caliper 500205987 is the right brake system for KOD GP models and is compatible with the model 500202020. This provides model builders with a spare part for repairing and maintaining their models; clear compatibility information facilitates selection and installation. Kompatibilitätsangabe: 500202020
Replacement & spares for combustion models
KOD GP Clutch Kit complete
500205993only available from customer service
The KOD GP clutch set complete (500205993) from Carson offers a complete clutch set for KOD GP. Model building enthusiasts will find here a complete set for faithfully renewing the clutch, ideal for restoring the drive system to the manufacturer's specifications and operating it precisely.
Replacement & spares for combustion models
KOD GP Clutch Nut
500205994only available from customer service
Carson KOD GP clutch nut 500205994 is the original spare part for your KOD GP model and is aimed at model building enthusiasts who value precisely fitting components. This clutch nut enables the correct connection within the clutch unit and facilitates targeted maintenance or the targeted replacement of defective parts.
Replacement & spares for combustion models
KOD GP Filter Set
500205995only available from customer service
500205995 KoD GP air filter set from Carson is the complete air filter replacement for KoD GP models and contains all components as one set. Specially developed for model builders, this complete package offers a clear, compatible solution for filter replacement on KoD GP vehicles and ensures uncomplicated replacement and spare parts maintenance.
Replacement & spares for combustion models
KOD GP Motor Mounts
500205992only available from customer service
The Carson 500205992 KOD GP engine mounts made of aluminum are a perfect fit for the 500202020 model and provide the necessary mounting base for the engine. For model building enthusiasts who value original spare parts, they ensure simple installation and reliable integration into the chassis. A high-quality original part from Carson that delivers confidence in function and fit.
Additional spares
KOD GP Receiver/Servo mount
500205989only available from customer service
Carson KOD GP receiver/servo bracket 500205989 is the custom-fit bracket for your KOD GP setup and is expressly compatible with the model 500202020. For model building enthusiasts, this spare part offers a clear solution for the targeted replacement of receiver and servo, so that repair and reconditioning can be carried out with precision.
Replacement & spares for combustion models
KOD GP Throttle Linkage
500205990only available from customer service
Carson KoD GP throttle/brake linkage 500205990 is the precise replacement linkage for ambitious model builders. It takes over the throttle and brake control and is specially designed for the model 500202020. Ideal for quick replacement during repairs or upgrades to reliably restore steering and driving behavior.
Additional spares
KOD Sideguard (2)
500405905only available from customer service
Carson KoD side protection 500405905 (2 pieces) is an original chassis protection for KoD models and offers the right solution for replacing or refreshing damaged side panels. Compatible with the 500202020 and 500409063 models, it is aimed at model building enthusiasts looking for precision-fit parts.
Additional spares
KOD Steering linkage (2)
500405899only available from customer service
The KOD tie rod set 500405899 from Carson (2 pieces) is a precisely fitting spare part for precise steering movements and the exact restoration of the driving function. Especially suitable as a replacement for the models 500202020 and 500409063, it allows model builders to carry out simple repairs or targeted upgrades to ensure steering precision.
RC chassis & attachments
KOD Wing mount posts kit
500405904only available from customer service
Carson KoD Wing mount posts kit 500405904 is the original spoiler mount for KoD models and is aimed at discerning model builders who are looking for specific spare parts. The set is suitable for the models 500202020 and 500409063 and enables direct replacement to restore the standard spoiler mounting of your model.
Replacement & spares for combustion models
Manifold sealing (5) Force
500902078only available from customer service
Carson Force manifold gasket 500902078 - 5 pieces is a compact spare parts set for model building enthusiasts that enables precise replacement and targeted maintenance. Five original Force manifold gaskets provide a reliable supply for quick repairs and ensure clean, professional repair of your model. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
Pull Cord Starter, w/o Flange
500054648only available from customer service
Carson Force Flangeless Pull Starter 500054648 is the precisely named pull starter for your model, clearly labeled as flangeless and offered by Carson. Model building enthusiasts benefit from the clear material number for easy identification and targeted replacement; this spare part simplifies ordering and parts management for repair and maintenance. Warning! Not suitable for children under 14 years.
Replacement & spares for combustion models
Virus 4.0 Throttle Linkage
500205953only available from customer service
Carson Virus 4.0 Throttle Linkage (material number 500205953) is the right spare part for the Virus 4.0. Model builders receive a throttle linkage named by Carson, intended for replacement or repair on the Virus 4.0, and can thus find the required part for their vehicle. The article number 500205953 simplifies searching and ordering.