RC brushless motors
Maximum efficiency and strong performance: Carson brushless motors deliver high RPMs with minimal heat and low wear. Perfect for demanding drivers who value power, smooth running, and long life.
RC brushless motors
Maximum efficiency and strong performance: Carson brushless motors deliver high RPMs with minimal heat and low wear. Perfect for demanding drivers who value power, smooth running, and long life.
More
RC brushless motors
1:10 Dragster Turbo 2.0, brushless set
500906310€59.99
The 1:10 Dragster Turbo 2.0 brushless set brings a compact power package to RC vehicle builds with a sensorless 3200 kV motor and an electronic speed controller matched to hobby-grade running. In the chassis, the black finned motor layout and separate controller create a clean drive setup for fast acceleration and direct throttle response. The motor delivers a no-load speed of 24,420 RPM and approx. 390 W short-term output, with 53 A continuous current for sustained running. Its dimensions of 35.8 x 50 mm and a shaft diameter of 3.175 mm provide concrete fitting data for compatible installations, while the motor weight of 148 g and ESC weight of 80 g help when planning the balance of a 1:10 model. The controller is designed for 7.4 V operation and works with 2S LiPo or 6-cell NiMH battery packs. Forward, brake and reverse functions are built into the ESC, and the T-Plug connector forms part of the power connection. This set suits RC car projects that need a coordinated motor and controller combination rather than separate component sourcing. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions. Warning! Not suitable for children under 14 years.
RC brushless motors
Dragster Turbo 2.0, brushless set, 1:10
500906311€59.99
The Dragster Turbo 2.0 brushless set brings a matched drive upgrade to 1:10 RC models with a 2600 kV sensorless brushless motor and a 60 A waterproof ESC. With a no-load speed of 20,720 RPM and short-term output of about 310 W, the set is built for hobby setups that call for stronger acceleration and a more direct throttle feel. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, giving clear reference points for installation planning in suitable chassis. Its continuous current is 42 A. The ESC adds 80 g and is designed for 2S LiPo or 6-cell NiMH batteries at 7.4 V. A forward, brake and reverse function is integrated, and the controller handles 60 A continuous current with 360 A peak current. The T-Plug connector defines the battery-side connection, while the included switch module and receiver lead support standard RC wiring layouts. This set suits rebuilds, performance-focused replacements and fresh 1:10 projects where motor and controller need to work as a coordinated pair. A brushless motor, speed controller and instructions are included. A battery pack, charger and radio gear are required separately. Warning! Not suitable for children under 14 years.
RC brushless motors
1:10 Dragster Turbo Program Card, ESC accessory
500906303€14.99
The 1:10 Dragster Turbo Program Card brings direct ESC setup control to the workbench, letting key drive parameters be changed through a compact wired unit instead of relying on menu-heavy programming steps. Its black housing, printed setting layout and BEC-style connection create a clear tuning tool for RC vehicle electronics. The card is designed to configure several core controller functions. Low-voltage shutdown can be set to 3.1 V, 2.9 V, 2.7 V or 0 V, while separate rows on the card cover acceleration, maximum braking force, maximum reverse force and response behaviour. Visible programme markings and status indicators on the face help keep each selected value easy to track during setup. Dedicated Programme and Reset controls support quick changes when testing different controller responses. Batteries are not included. In use, the card suits workshop tuning before a run as well as between sessions when a different brake balance, reverse setting or throttle reaction is needed. Age marking: 14 years. As an RC accessory for 1:10 applications, it adds a practical way to refine how an electric model reacts on the track or during general driving.
RC brushless motors
1:10 Dragster Turbo 4370KV, brushless set
500906301€69.99
The 1:10 Dragster Turbo 4370KV brushless set brings a matched sensorless drive package to RC car builds that call for sharp acceleration and high top-end speed. The combination of an 8T brushless motor and a waterproof electronic speed controller is designed for 1:10 applications, with the motor rated at 4370KV and up to 488W for fast-revving on-road setups and hard-charging off-road runs on suitable battery combinations. The controller is specified for 60A continuous current and 360A peak current, with 0.0007 Ohm resistance, 2A/5V BEC output, dimensions of 51 x 36 x 36 mm and a weight of 80 g. Programming is possible via Program-Card 500906303. The motor uses a 4-pole layout, supports up to 12V, draws up to 66A with a minimum current of 3.2A, and measures 35.8 x 50 mm at 148 g. A 3.175 mm motor shaft with 15 mm shaft length and 4 mm gold connectors completes the hardware package for clean installation in compatible chassis. For running setups, 2S LiPo and 6-cell NiMH are specified for on-road and off-road use, while 3S LiPo and 9-cell NiMH are specified for on-road use only. Wet and damp conditions such as rain and puddles are supported, but the vehicle and components must not be submerged under water. The set includes the brushless motor, brushless controller and instructions.
RC brushless motors
1:10 Dragster Turbo, brushless set, 3300KV
500906302€69.99
Built for fast 1:10 RC setups, the Dragster Turbo brushless set pairs an 8T sensorless 3300KV motor with a 60A controller for strong launch force, high efficiency and the kind of top-end pace that suits both on-road and off-road driving. The combination is designed for 2S, 3S and NiMH 6 to 9 cell battery formats, opening up different power layouts within one drive package. The controller measures 51 x 36 x 36 mm, weighs 80 g and is specified for 60A continuous current with 360A peak current, a 2A/5V BEC and 0.0007 Ohm resistance. Programming is possible via Program-Card 500906303. The motor measures 35.8 x 50 mm, weighs 148 g and is rated at max. 350W with up to 17V, max. 47A and min. 2.6A. Its 4-pole layout, 4 mm gold connectors, 3.175 mm shaft diameter and 15 mm shaft length give model-building enthusiasts concrete data for matching the set to an existing chassis and drivetrain. Wet and damp running conditions such as rain and puddles are supported, but the vehicle and components must not be submerged under water. The set includes the brushless motor, brushless controller and instructions, making it a focused upgrade choice for hobbyists tuning acceleration, response and speed in electric RC cars.
RC brushless motors
1:10 BL Motor Dragster Turbo 2.0, RC motor
500906313soon available again
The 1:10 BL Motor Dragster Turbo 2.0 2000KV is an electric RC motor created for model-building enthusiasts working on a focused dragster-style setup. Its 2000KV rating gives the drive system a clearly defined basis for matching motor characteristics to the intended vehicle configuration and running style. As a brushless motor, it belongs in hobby projects where drivetrain choice shapes how the model responds under power. The 1:10 format keeps the motor aligned with a widely used RC vehicle scale, making it relevant for replacement work, planned upgrades or a fresh build around compatible components. The designation Dragster Turbo 2.0 places the motor within a performance-oriented setup, while the electric vehicle category points to battery-powered RC use rather than fuel operation. Minimum age 14 Years is stated for this motor. Battery is not included. On the workbench, this motor suits projects where the drive package is selected component by component and the KV figure matters in the overall setup plan. It also fits rebuilds where an existing RC vehicle needs a fresh motor matched to the rest of the electronics. Warning! Not suitable for children under 14 years.
