Ko Propo Servos
KO Propo servos let you fine-tune the steering of your RC model with precision. Compact designs, durable gears, and responsive performance make them ideal for performance-focused setups.
RC servos
1:10 KO RSx4S-one10X, servo, low profile
505030137€124.99
The KO RSx4S-one10X is a 1:10 low-profile servo shaped for compact RC chassis where installation height and steering packaging need careful control. Its metal gear layout and the stated 11.8 V specification place it firmly in performance-focused electronics setups, giving model-building enthusiasts a concrete steering component for advanced builds. The low-profile housing suits layouts where body clearance, linkage position and surrounding electronics leave little spare room. In that context, the 0.10-second speed figure supports fast steering response when direction changes need to happen with little delay. The servo format also makes it relevant for 1:10 on-road and competition-style configurations that rely on tidy component placement rather than oversized hardware. As an electronic control component, it belongs in a build where the steering system, power supply and chassis geometry are chosen as a matched package. On the bench, the compact form helps when planning a clean electronics layout around the steering area. Once installed in a compatible 1:10 model, the combination of low-profile dimensions, metal gears and high-voltage operation supports focused tuning for precise handling response. Warning! Not suitable for children under 14 years.
RC servos
KO BSx4S-one10 Grasper2, Models Supplies
505030216€174.99
KO BSx4S-one10 Grasper2 appears in the supplied conformity data as an electronic component within models supplies, carrying the exact designation KO BSx4S-one10 Grasper2 LP/MG/12,1/0,11. That precise naming helps place it within a hobby setup where exact component matching matters. The available data is technical rather than promotional, so the description stays close to what is verifiable. The component is listed under Models & Accessories and Models Supplies, with a 14 Years age marking in the source data. Battery inclusion is stated as false, which means no battery is named as part of the included contents here. The documentation also records an EU declaration of conformity issued under the manufacturer's responsibility, with references to 2014/30/EU, 2011/65/EU and 1907/2006. Harmonised standards EN55014-1:2021 and EN55014-2:2021 are named in that declaration. For model-building enthusiasts, this kind of exact designation supports careful parts selection when maintaining, replacing or specifying electronics in a compatible RC build. The source data does not provide further functional specifications, dimensions or included accessories, so the focus remains on the documented identity and compliance references of the component. Warning! Not suitable for children under 14 years.
RC servos
KO BSx4S-one10 Grasper2, servo, one10
505030220€184.99
The KO BSx4S-one10 Grasper2 brings a focused servo setup to one10 RC builds, combining a 0.12-second transit speed with a 33 torque rating for direct control input in running and tuning sessions. Its STD and MG specification places it in the standard-size class with metal gear construction, a combination that fits the practical demands of hobby-grade model sport use. Within an RC chassis, the servo is the link between radio command and mechanical movement, and that role makes speed and consistency central to the driving feel. This unit is intended for model applications where steering accuracy or throttle actuation needs a compact, dedicated control component rather than a generic replacement. The 4S designation in the name identifies the series variant, while the one10 reference ties the servo to the widely used 1:10 model class. Batteries are not included. In workshop use, the servo suits fresh assemblies, drivetrain updates and targeted replacements where a standard-format control unit is needed. On the track or during car park running, it supports clean directional changes and controlled input transfer through the steering or throttle linkage, giving hobby builds a clearly defined electronic control element. Warning! Not suitable for children under 14 years.
RC servos
KO ICS-USB Adapter HS Servo/ESC Software
505061028€34.99
The KO ICS-USB Adapter HS Servo/ESC Software adds a direct computer link for supported model electronics setup. Built for use with KO HS servo and ESC software, it connects compatible components to a PC-based software environment where settings can be adjusted with more precision than through on-model controls alone. This accessory belongs in the model workshop where electronic behaviour is tuned to match the chassis, surface and driving style. Servo response, ESC parameters and related software-based adjustments can be handled through the adapter when used with supported systems. Its USB connection makes it a practical bridge between model electronics and screen-based setup work, keeping repeated changes organised during testing or maintenance. Batteries are not included. On the bench before a run, the adapter supports structured setup sessions for supported servo and ESC combinations. It also fits ongoing maintenance work when electronics need reconfiguration after component changes, helping hobbyists return to a known setup with less guesswork. Warning! Not suitable for children under 14 years.
RC servos
KO Neo Advantage Capacitor+, ESC accessory
505045565€35.99
The KO Neo Advantage Capacitor+ for BL ESC is an RC electronics accessory aimed at hobby-grade model setups, with a clear focus on brushless ESC applications. Its compact add-on role suits enthusiasts who fine-tune existing vehicles and control systems rather than starting with a complete ready-to-run package. Placed in the Models & Accessories and Models Supplies range, this component belongs to the technical side of RC building, where each part is chosen for a specific task in the drivetrain or control layout. The supplied compliance record identifies the KO Neo Advantage Capacitor+ for BL ESC by name and documents EU declaration of conformity references to 2014/30/EU, 2011/65/EU and 1907/2006. Harmonised standards EN55014-1:2021 and EN55014-2:2021 are also listed in that record. Batteries are not included. In practical workshop use, this kind of accessory fits into upgrade, maintenance and replacement routines around brushless speed controller installations. It suits RC benches, pit boxes and parts collections where dedicated electronics components are selected to match an existing model setup. The age marking is 14 Years. Warning! Not suitable for children under 14 years.
RC servos
KO PDS-2503 SLP, servo, 7.4 V response unit
505030067€43.99
The KO PDS-2503 SLP is a response servo built for RC model setups that call for quick, direct control signals. With a stated response speed of 0.12 at 7.4 V, it brings a technical specification that matters when steering input or throttle actuation needs to register with minimal delay in a 14 Years hobby environment. As a dedicated servo unit, it belongs at the heart of the control system, translating radio commands into mechanical movement inside the model. That makes it a relevant choice for enthusiasts refining handling characteristics, replacing a worn control component, or planning a fresh electronics layout around a defined voltage figure. The supplied data also confirms that batteries are not included, so any wider power setup remains dependent on the surrounding RC installation rather than on this single component alone. In workshop use, the KO PDS-2503 SLP fits projects where response speed and voltage compatibility are key selection points before the first run. It also suits upgrade work on existing RC models, where a clearly specified servo can help shape a more exact control feel during setup and driving sessions. Warning! Not suitable for children under 14 years.
RC servos
KO PDS-2513 SLP/MG Servo, RC servo unit
505030068€62.99
The KO PDS-2513 SLP/MG servo adds a defined control component to RC model setups, with a stated 9.6 V rating and a response speed of 0.13. In a chassis where steering or throttle inputs need a dedicated electronics unit, that combination gives model-building enthusiasts a clear technical basis for planning a replacement or a fresh installation. As part of the Models & Accessories range, this servo sits in the electronics side of an RC build rather than the body or drivetrain. The KO PDS-2513 SLP/MG designation helps identify the unit accurately when matching parts within an existing setup. The supplied product data also confirms an EU declaration of conformity for this servo, with references to 2014/30/EU, 2011/65/EU and 1907/2006, plus the harmonised standards EN55014-1:2021 and EN55014-2:2021. That gives the component a documented compliance basis alongside its stated electrical specification. On the bench, the servo fits naturally into repair work, electronics upgrades or a planned RC build that needs a named control unit rather than a generic placeholder. It also suits spare-parts storage where exact model identification matters before installation in a compatible RC system. Warning! Not suitable for children under 14 years.
RC servos
KO PDS-2516 SLP/MG, Power Servo, RC servo
505030069€62.99
The KO PDS-2516 SLP/MG Power Servo is an RC servo component aimed at model-building enthusiasts who want a clearly identified electronics part for a fresh build, a workshop replacement or a tuning project. Its designation combines the KO PDS-2516 SLP/MG name with the technical references 10.8 and 0.16, giving the servo a distinct place in parts searches and component matching. Within an RC setup, a servo converts control signals into mechanical movement, making it a central link between radio commands and the steering or throttle function of the model. That makes the exact designation especially relevant when an existing setup calls for a specific servo format rather than a generic substitute. The data also confirms that batteries are not included. An EU declaration of conformity is documented for this electronic component, with conformity references to 2014/30/EU, 2011/65/EU and 1907/2006, plus EN55014-1:2021 and EN55014-2:2021. This servo fits naturally into workshop benches, rebuild sessions and electronics upgrades where the right named component keeps a project moving without guesswork. For hobbyists comparing replacement parts, the KO PDS-2516 SLP/MG designation provides a concrete reference point when matching an RC model's installed control hardware. Warning! Not suitable for children under 14 years.
RC servos
KO RSx4S-one10X, servo, low profile metal gear
505030147€124.99
The KO RSx4S-one10X brings a low-profile servo layout and metal-gear construction into a compact steering component for RC model setups. With its stated 11.8 V specification and 0.10-second transit figure, it is positioned for fast, direct response in electronics packages that call for a space-saving servo format. Its low-profile housing suits chassis arrangements where vertical clearance is limited and a compact installation matters for the overall build. The metal gear train gives the steering mechanism a defined mechanical path from servo output to linkage, which supports consistent input transfer under repeated direction changes. The designation in the source data identifies this as a servo rather than a complete vehicle, so the focus stays on steering performance and integration into a compatible RC platform. No batteries are included. In use, this kind of component fits competition-oriented touring car and one10 model projects where quick steering correction and tidy packaging are part of the setup brief. It also suits rebuilds and electronics upgrades that call for a low-profile servo with a high-voltage specification and a fast stated response figure. Warning! Not suitable for children under 14 years.
RC servos
KO RSx4S-Power H.C, servo, 1:8 RC model
505030145€174.99
The KO RSx4S-Power H.C brings competition-focused servo hardware into 1:8 RC model setups with a stated 26.3 torque figure and 0.13 second speed. In the standard STD/MG format, it is aimed at hobbyists who tune steering response with the same care as chassis balance and drivetrain setup. Its specification points clearly toward demanding RC use: the 4S-ready design suits higher-performance electronics layouts, while the metal gear construction focuses on direct power transfer inside the servo case. The combination of speed and torque supports fast steering corrections through technical sections, tighter line placement in corners, and more consistent response when track grip changes. Because the data identifies this unit as a servo rather than a complete vehicle, it fits naturally into custom builds, race maintenance, and targeted replacement work where a defined control component is needed. Batteries are not included. On the bench, the KO RSx4S-Power H.C suits builders comparing servo characteristics for a 1:8 buggy, truggy, or other RC model in that scale class. At the track, the stated figures support setups where quick input transfer and firm steering authority shape how the model reacts lap after lap. Warning! Not suitable for children under 14 years.
RC servos
KO Servo Model Selector, servo accessory
505061032€18.59
The KO Servo Model Selector for 4S BS/RSx4S adds a dedicated control accessory to the electronics side of an RC setup, giving model-building enthusiasts a focused way to work with compatible servo configurations. Built around KO 4S BS and RSx4S compatibility, it fits naturally into bench preparation before a chassis heads to the track. Instead of changing hardware across different builds, this selector is made to support model-specific servo selection within the stated KO system. That makes it a useful addition when several RC models share the same electronics platform but call for different setup choices. The compact accessory role also keeps the emphasis on tuning and configuration rather than on major component swaps. Minimum age is 14 Years. Batteries are not included. On the workbench, the selector suits organised setup sessions where electronics are matched to a fresh build or adjusted between running days. It also fits trackside preparation, where a compatible servo system can be configured with a more deliberate, model-led approach before driving begins. Warning! Not suitable for children under 14 years.