RC electric motors & controllers
Boost your RC model’s performance with our electric motors and ESCs. For more speed, precise control, and efficient operation – ideal for both beginners and pros. Discover powerful upgrades to take your model to the next level!
RC electric motors & controllers
Boost your RC model’s performance with our electric motors and ESCs. For more speed, precise control, and efficient operation – ideal for both beginners and pros. Discover powerful upgrades to take your model to the next level!
More
RC electric motors & controllers
1:10 Dragster Turbo 2.0, brushless set
500906312€59.99
The 1:10 Dragster Turbo 2.0 brushless set brings a matched drive upgrade to electric RC models with a 2000 kV sensorless motor and a 60 A electronic speed controller. This 2-part combination is built for hobby setups that need clear throttle delivery, compact installation and a defined power package in one box. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, making it a concrete fit option for many 1:10 chassis layouts where motor space and shaft size matter during planning. Its no-load speed reaches 15,170 RPM, while short-term output is rated at approx. 236 W for lively response when the drivetrain comes under load. The ESC adds 80 g, handles 60 A continuously and up to 360 A peak, and manages forward, brake and reverse functions through a sensorless brushless system. Power supply compatibility covers 2S LiPo and 6-cell NiMH packs, with a T-Plug connector already specified. This set suits rebuilds, replacement projects and performance-focused electronics swaps in 1:10 electric vehicles. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions, giving model-building enthusiasts a clearly defined basis for a fresh drive configuration. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
1:10 Dragster Turbo 2.0, motor, 2600KV
500906314€34.99
The 1:10 BL Motor Dragster Turbo 2.0 2600KV is a brushless drive component for electric model vehicle setups, centered on a 2600KV motor specification and a format matched to 1:10 applications. As a dedicated replacement or upgrade part, it brings the drive system back into service with a clearly defined motor unit for workshop benches, rebuilds and running repairs. Within a powered vehicle setup, the motor sits at the heart of the drivetrain, making the KV rating a key reference point when matching the unit to the existing electronics and the intended running character. The product data identifies this version specifically as the Dragster Turbo 2.0 motor, which keeps the designation clear when replacing a worn unit or sourcing the correct spare for an existing model. Because this is a component rather than a complete vehicle, the focus stays on fit within an electric model system and on the practical value of having the correct motor type ready for maintenance. The 14 Years age marking is stated in the product data. On the workbench, this kind of motor suits planned repairs, drive refreshes and parts-led tuning sessions where a named 1:10 brushless unit is the required starting point for getting a model back on track. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
540 Pro 13T-BB, electric motor, 6 V RC drive
500906322€18.99
The 540 Pro 13T-BB electric motor is a brushed RC drive unit built for model vehicle projects that need a clearly defined performance setup. With 13 turns, a nominal voltage of 6 V and an operating range from 4.8 to 8.4 V, it fits tuning, replacement and workshop builds where the electrical data matters as much as the fit. The attached cable adds a practical connection detail straight from the pack. Its technical profile centres on 32,000 rpm, 35 N mm torque, 99 W output and 5.3 amps current consumption. That combination suits hobbyists comparing drive characteristics across compatible RC electronics rather than choosing by size alone. The 540 can format is a familiar reference point in many model vehicle platforms, and the BB designation marks this version as a ball bearing motor. For workshop planning, the stated voltage window helps match the motor to an existing setup without guesswork. In use, this motor suits replacement jobs on worn brushed drives, fresh tuning builds and spare-parts boxes for regular track or car park sessions. The compact 540 format and included cable keep the focus on fitting the motor into a compatible RC chassis and getting the drivetrain back into action. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
540 Pro 17T-BB, electric motor, 6 V brushed
500906323€18.99
The 540 Pro 17T-BB electric motor brings classic brushed drive character to RC vehicle builds with a 540 size format, 17 turns and a measured output of 69 W. At 24,500 rpm, the motor delivers a lively power curve that suits hobby setups looking for a defined balance of speed and control rather than an undefined all-round unit. Its nominal voltage is 6 V, while the stated operating range of 4.8 to 8.4 V leaves room for different electronics configurations within the same build plan. Current consumption is listed at 3.5 amps, and the 32 N mm torque figure gives a concrete reference for how the motor translates electrical input into rotational force at the shaft. The BB designation points to ball bearing support, a detail valued in model-building circles for smooth running in a compact drive component. Included cable simplifies the connection step and keeps the motor ready for fitting into a compatible RC chassis. With an age marking of 14 years, this motor fits enthusiast-oriented RC projects where component choice shapes the final driving character. It works well in workshop-style upgrade sessions, replacement builds or fresh vehicle assemblies where a 540 brushed motor with 17 turns is the required drive unit. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
540 Pro 21T-BB, electric motor, 6 V 60 W
500906324€18.99
The 540 Pro 21T-BB electric motor brings classic brushed drive technology to RC model builds in a compact 540 size format. With 21 turns, a 6 V nominal voltage and a stated output of 60 W, it gives hobby projects a clearly defined motor option for drivetrain installations where size, power and electrical data all need to line up. Its operating range spans 4.8 to 8.4 V, making the motor suitable for different compatible power configurations within that window. The stated speed of 19,000 rpm and current consumption of 2.7 amps provide concrete figures for planning the drive package around the motor's characteristics. A torque rating of 30 N mm adds another useful reference point when matching the motor to gearing, transmission parts and the intended running style of the model. The included cable supports straightforward integration into the vehicle's electrical layout. In workshop use, this motor suits enthusiasts comparing voltage, rpm, torque and turns before choosing a brushed setup for a compatible RC vehicle. It also works well as a replacement or upgrade path when an existing 540 format installation calls for a motor with clearly specified electrical and performance values. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
Electric Motor 540 23T-BB, RC motor, 6 V
500906320€14.99
The 540 23T-BB electric motor brings classic brushed drive technology to compatible RC vehicle builds with a clearly defined 540 format, 23 turns and 50 W output. A nominal voltage of 6 V and a working range from 4.8 to 8.4 V give model-building enthusiasts concrete figures for planning a suitable drivetrain setup around the motor. Its 19,900 rpm speed, 2.2 amp current consumption and 29 N mm torque outline how this unit is positioned within an RC system: fast enough for responsive running, yet specific enough for considered replacement or tuning decisions. The included cable adds a practical installation detail straight from the box contents, while the single output shaft and compact cylindrical housing suit the familiar layout used in many powered model vehicle applications. As a standalone motor component, it fits naturally into workshop routines such as refreshing a worn drive unit or assembling a new compatible chassis. In use, this motor suits hobby bench setups where voltage, turns and output need to be matched carefully to the rest of the electronics. The 14 Years marking places it within the hobby-focused end of the range, making it a fitting choice for model vehicle enthusiasts working on maintenance, upgrades or fresh RC builds. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
Electric Motor 540 80T-BB, RC motor, 6 V
500906321€14.99
The 540 80T-BB electric motor brings classic brushed RC drive hardware into compatible vehicle builds with a 6 V nominal voltage, 80 turns and a measured output of 15 W. Its cylindrical 540 format, output shaft and attached cable create a straightforward basis for drivetrain installation where controlled delivery and clear mechanical feedback are part of the appeal. A voltage range of 4.8 to 8.4 V opens the motor to different matching electrical setups, while the stated current consumption of 0.7 amps adds a concrete reference point for planning the drive system. The rated speed of 5,900 rpm works alongside 130 Nmm torque, giving the motor a balance that suits applications where usable pull and steady response matter alongside rotation. The included cable is already fitted to the motor, so the connection side is present from the start. Age marking: 14 Years. In an RC workshop, this motor fits naturally into replacement projects, fresh chassis builds or drivetrain changes that call for a 540-size brushed unit. It also suits hobby setups where the focus lies on matching voltage, torque and rpm figures carefully to the rest of the running gear for a well-judged result. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
ESC/RX unit REFLEX-XS, RC electronics, XT60 plug
500906305€30.99
The ESC/RX unit REFLEX-XS brings drive control and 2.4 GHz radio reception together in one compact electronics module for 1:10 XS-Chassis vehicles. With its integrated layout, the unit combines key control functions in a single housing and supports a clean installation inside compatible Carson models. Visible connection points include a 3-pin socket marked S, + and -, attached power leads, an ON/OFF switch and an XT60 plug interface. This arrangement gives the module a clear role within the vehicle's electrical system, linking throttle control, signal handling and power routing through one central component. The slim antenna wire is part of the built-in receiver section, while the finned front section adds a distinct technical layout to the housing. The unit is intended for Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. As a replacement or service component, it suits workshop setups, maintenance tasks and rebuilds where the matching chassis reference matters. 14 Years marks the recommended age.
RC electric motors & controllers
REFLEX-XS ESC/RX Unit, RC electronics for XS-Chassis
500906309€39.99
The REFLEX-XS ESC/RX unit is a dedicated electronics replacement for Carson XS-Chassis vehicles in 1:10 scale, combining ESC and receiver functions in one compact module. With its XT60 plug connection, it is set up for the stated chassis family and supports a clean return to the original control layout when an existing unit needs to be replaced. This spare part is assigned to the Carson XS-Chassis range under the references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The listed vehicles include Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants, which makes the unit a precise match for several models within the same platform. As an ESC/RX combination, it brings two core electronics functions together in one component, which helps keep the installation focused on the chassis system named in the data rather than on mixed standalone parts. Within workshop use, this unit suits repair, maintenance and platform-specific replacement work on compatible Carson models. The 14 years and up marking is stated in the product data, and the part sits in the model supplies area for hobby-oriented vehicle upkeep and running repairs.
RC electric motors & controllers
Viper Micro Marine, speed controller, waterproof
500906137€40.99
The Viper Micro Marine speed controller brings compact electronic control to RC boat setups with a 26 x 25 x 9 mm format, 23 g weight with cable, and a fully waterproof design for marine running conditions. Its layout is built around direct installation, with wires already attached and an external on-off switch included on the harness. This controller is specified for 5 to 10 NiMH cells and an operating voltage of 6 to 12 V, making it suitable for a wide range of compact electric marine configurations. The motor limit of 10 Turn defines the drive range it is designed to handle, while the 1.0 KHz frequency and 1.5 A BEC output round out the technical package. Brake and adjustable braking point are not provided here; the focus stays on forward and reverse control with a simplified operating concept. All adjustments are handled through one setup button, keeping programming concentrated in a single control input. In use, that combination suits hulls where installation space is limited and wiring needs to stay orderly around battery, motor and receiver connections. The waterproof build, integrated control protections and compact dimensions make it a focused choice for electric marine models that need a small controller with clear setup logic.
RC electric motors & controllers
ESC tio Marine 30, brushed marine speed controller
500906291€51.99
Built for RC boat use, the tio Marine 30 is a brushed marine speed controller that combines 6 to 12 V operation with a 30 A motor limit for DC brushed motors. Its fully waterproof design suits running conditions where spray, splashes and wet decks are part of the setup, while the compact controller body connects battery and motor through clearly marked positive and negative leads. The control system uses 4 quadrant operation, so the motor stops completely before changing into the opposite direction. That sequence creates balanced response around the neutral position and supports precise manoeuvring at low speed. Reverse can also be switched on or off, allowing either forward and reverse running or a forward-only mode with brake function. Programming and calibration are handled through the set button and LED signals, with separate indications for neutral, forward, reverse, battery selection and failsafe mode. The controller is compatible with LiPo as well as NiCAD, NiMH and lead acid battery packs. In a model boat, that mix of directional control and battery flexibility suits everything from careful harbour-style manoeuvres to steady throttle changes on open water. When signal loss occurs, the built-in failsafe returns the controller to neutral, and the added protection functions help manage motor stall, short circuit and overheating during demanding sessions.
RC electric motors & controllers
Speed Controller Dragster Brushed 70A, ESC
500906264€32.99
The Speed Controller Dragster Brushed 70A brings precise throttle control to brushed RC setups in a compact 34.5 x 30.2 x 18.7 mm format with a weight of 39 g. Its splash-proof design and dust-proof housing broaden installation options beyond land vehicles, including boat applications where moisture resistance matters. This electronic speed controller is built for brushed 540 and 550 motors at 18T or below 30000 rpm at 7.2V, giving model builders a clear technical match for common 1:10 platforms. Forward current is rated at 70A continuous and 360A peak, while reverse reaches 40A continuous and 180A peak. Automatic throttle calibration simplifies setup, and the integrated capacitor supports stable operation. Battery type and drive mode are selected by jumper pin, with settings for LiPo or NiMH and operating profiles for Boat, F/B/R and Crawler. An integrated on/off switch and receiver lead complete the wiring layout between battery, motor and receiver. Included are the Dragster Brushed 70A speed controller and a Tamiya/T-plug adapter. For installation and operation, radio gear, a battery pack and a charger are required separately. In a buggy, crawler or boat, the controller gives brushed power systems a defined, configurable control centre for varied terrain and driving styles.
RC electric motors & controllers
ESC Viper Sub 10, speed controller, 6-12V
500906294€49.99
Built for RC submarine setups, the Viper Sub 10 is a brushed speed controller that combines 6-12V operation with a 40A motor limit for DC brushed motors under load. The fully waterproof design suits running conditions where electronics work below the surface and around constant spray, wiring and propulsion demands. A one-touch setup routine calibrates the controller to the radio system through the onboard button and LED sequence, setting neutral, full forward and full reverse positions. The unit also adds programmable reverse functions for more precise control of manoeuvres in confined water spaces. A high-power 3A BEC provides regulated 5.0V output for additional onboard functions that need a stable supply, going beyond the standard Viper Marine specification mentioned in the data. Built-in failsafe, motor short circuit protection and thermal overload protection add concrete electronic safeguards during operation. In a scale submarine build, these features support steady throttle control during launch, submerged cruising and low-speed direction changes near obstacles or weed. The compact controller format with clearly marked battery and motor connections also fits the technical character of dedicated RC boat and submarine installations.
RC electric motors & controllers
Sirius Max 2 ESC, speed controller, digital setup
500906174€54.99
The Sirius Max 2 ESC brings compact speed control and clear setup logic to electric RC vehicle builds. Its digital 1-touch calibration uses the SET button and red, green and blue LEDs to store neutral, full forward and full brake or reverse positions, creating a direct link between transmitter input and motor response. With an input range of 4.8 to 12.0 V, the controller works with 4 to 10 NiCd or NiMH cells and with 2S to 3S LiPo packs from 7.4 to 11.1 V. The integrated battery type selection switches between automatic NiCd or NiMH cutoff and automatic LiPo cutoff before power-up, and the blue LED stays lit in LiPo mode. A 2.0 kHz frequency and 1.5 A BEC current support the electrical layout, while the compact housing measures 40 x 36 x 12 mm and weighs 54 g including wires. Factory-fitted leads connect battery, motor, switch and receiver, with color coding shown as black for battery negative, red for battery positive, blue for motor negative and yellow for motor positive. In use, the controller suits hobby builds that need clear installation feedback and adaptable drive behavior. Failsafe mode signals with a flashing red LED and returns the controller to neutral when receiver signal is lost or incorrect, helping maintain controlled response during running sessions. Age 14 Years. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
Viper Marine 25, speed controller, 6-12V ESC
500906261€52.99
The Viper Marine 25 speed controller is designed for RC boat setups that need compact electronic control with marine-focused protection. Its 100% waterproof construction, 25 A current limit and input range of 6.0-12.0 V/DC give this ESC a clear place in electric model boating, where wet running conditions and dependable throttle response matter at the same time. A 1 kHz drive frequency shapes the motor control, while the onboard 1.5 A BEC supports the connected radio system from the controller itself. Forward and reverse are both available, and the reverse function can also be adjusted or disabled to suit the layout and handling style of the model. All adjustments run through a single set up button, keeping configuration direct on the bench before the hull goes back on the water. Integrated fail safe, motor short protection and overload protection add concrete electronic safeguards, and the included wires plus on-off switch support clean installation into the boat. In use, the controller suits electric marine models that need a compact ESC between battery, motor and radio gear. Whether fitted into a sport hull or a scale boat, the 6-12 V/DC operating range and marine-specific protection features support controlled running across repeated sessions on the water. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
tio Marine 15, speed controller, brushed 6-12V
500906290€41.99
The tio Marine 15 brushed speed controller is built for RC boat installations that need compact motor control, waterproof construction and support for 6-12V operation. Designed for brushed DC motors up to a 15A load, it brings measured throttle response to marine setups where steady low-speed input and clean reversing behaviour matter on the water. Its control system uses 4-quadrant operation, so the motor stops fully before changing direction. That sequence creates balanced response around the neutral point and supports careful handling during docking, tight turns or slow approach work. The controller is programmable through the set button, with reverse selectable as on or off to suit either forward and reverse running or forward-only use. Battery compatibility covers LiPo as well as NiCAD, NiMH and lead acid packs, giving broad scope for different boat electrics. LED indications support setup and status checks, including calibration, battery mode and failsafe status. In a typical installation, the controller links battery, receiver and motor through clearly assigned positive and negative leads, making it a focused choice for brushed marine drive systems. Built-in failsafe returns the controller to neutral on signal loss, while motor short circuit protection and thermal overload protection support reliable running when load conditions become demanding.
RC electric motors & controllers
tio Storm X NoLimit speed controller, ESC
500906132€58.99
The tio Storm X NoLimit speed controller brings compact RC power management into a 40 x 35 x 12 mm format with a weight of 55 g including cable. Its waterproof design, integrated fail safe and built-in protection functions make it a focused electronics upgrade for model layouts that need dependable throttle control, braking and reverse handling. Calibration works through a single setup button and an LED-guided sequence rather than a bank of separate adjustments. The controller supports forward, brake and reverse, with reverse able to be switched off when a brake-only setup suits the model better. NiMH and LiPo battery types are supported across 4 to 8 cells and 4.8 to 9.6 V, while the 3.3 kHz drive frequency and 1.5 A BEC round out the technical package. Short-circuit protection and overload protection are built in, and the unit comes complete with wires plus an on off switch. In an RC car or similar electric model, the small footprint leaves more freedom when placing the electronics around the receiver, battery pack and motor. The neutral return in failsafe mode and the option to disable reverse give hobbyists clear control over how the model responds on the bench and out on the track. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
Viper Auto Sport 20, speed controller, waterproof
500906134€41.99
The Viper Auto Sport 20 speed controller brings waterproof electronic motor control to brushed RC model setups in a compact 40 x 35 x 12 mm format. With forward, reverse and brake functions, it gives the drivetrain clear throttle response while the 54 g weight with cable keeps the unit easy to place in tighter chassis layouts. Programming is handled through 1 setup button, so the controller can be configured without a complex menu structure. The stated 20 Turn motor limit defines its intended brushed motor range, and NiMH compatibility with 4 to 8 cells at 4.8 to 9.6 V covers common hobby configurations. An integrated fail safe is built in as a concrete control feature, and the electronics also include short-circuit protection, overload protection, an on off switch and complete wiring. The listed 3.3 k frequency and 1.5 A BEC output add further technical detail for model builders comparing drive components. In a touring car, buggy or other electric RC vehicle, the compact case and attached leads support tidy routing between battery, motor and receiver. Wet track sessions, club running and general hobby use all benefit from a controller that combines waterproof construction, direct setup and clearly stated electrical limits.
RC electric motors & controllers
Viper Truck Twin 27T/15T, speed controller
500906135€62.99
The Viper Truck Twin 27T/15T speed controller brings compact brushed-motor control to electric RC models with a 40 x 35 x 12 mm housing and a weight of 53 g including cable. Its waterproof construction and integrated wiring suit installations where space is limited and the electronics need a clean, self-contained layout inside the chassis. The controller is designed for NiMH battery packs with 5 to 10 cells and an input range of 6 to 12 V. A 15 Turn motor limit defines the drive range for compatible brushed setups, while a 3.0 A BEC supports receiver power supply. The operating sequence covers forward, brake and reverse, and the reverse function can be switched off when a model is set up for running without it. Setup is handled through a single button on the ESC, keeping the programming process focused on the controller itself rather than a separate programming unit. In use, the Viper Truck Twin 27T/15T fits RC truck and car builds that need compact dimensions, direct setup access and clearly defined drive functions. Complete wiring and an on-off switch support straightforward integration into a model, whether the controller is being installed in a fresh build or replacing an existing ESC in an established chassis. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
ESC VFS-FR2
500906276only available from customer service
500906276 KO PROPO VFS-FR2 electronic speed controller is a compact ESC for brushed motors, made in Japan and ideal for beginners to semi-pros. Preset with LiPo cut-off (6.0 V) and one-button programming with LED. Operation 6.6-7.2 V, motor limit 12 turns (LiPo)/23 turns (LiFe/NiXX), 120 A continuous, 300 A burst, BEC 6 V/3 A, aluminum heat sink and thermal protection; supplied ready to use. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
MD-1(Neutral Brake Type)
500906278only available from customer service
Carson KO PROPO MD-1 (item no. 500906278) is a precise, compact electronic speed controller (V/R Neutral Brake) for brushed motors up to type 370 - ideal for small track-driven vehicles and robot models. With 3.0-6.6 V input voltage, max. continuous current 4 A, PWM ~4 kHz and without BEC. Flat and lightweight (27×20.5×4.5 mm, 3 g), it can be mounted using double-sided adhesive tape; supplied ready for use, instructions included. Warning! Not suitable for children under 14 years.
RC electric motors & controllers
MD-1(RC ESC Type)
500906277only available from customer service
The KO PROPO MD-1 (500906277) electronic speed controller for brushed motors up to type 370 impresses with its flat design and simple installation using double-sided adhesive tape. Suitable for TAMIYA Mini Lunch Box (SW-01) and Dancing Rider Trike (T3-01). Three modes (standard, quick reverse, neutral brake), 3.0-6.6V, 4A, PWM ~4kHz, 27×20.5×4.5mm, 3g, ready to use with instructions. Warning! Not suitable for children under 14 years.
