Military model kits
Model tanks
1:24 Jeep Willys MB 80th Anniversary
510003635€37.99
Article number: 510003635 Product: 1:24 Willys Jeep MB "80th Anniversary" In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multipurpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II. Even after 80 years, the "Willys" is still considered today, to be the four-wheeled vehicle which is most symbolic of the American army during the Second World War, and thanks to its enthusiasts and collectors, there are many examples of the jeep, still in perfect working order. Detailed plastic kit
Model tanks
1:35 BMW R 75 with Side Car
510000315€11.99
Article number: 510000315 Product: 1:35 BMW R 75 with Side Car Model Dim.: 6,6 cm Contains 3 figures. Decal for one version. The new German army made use of the experiences collected in World War I to realize their modern reconstruction based on motorization. In spite of the limitations of the Treaty of Versailles able commanders introduced civilian vehicles into the army, thus creating a motorized mentality. In 1940 already, a battalion consisting of 3 to 4 companies each equipped with 52 motorcycles with sidecars and 4 motorcy-cles (single), was integrated into the motorized infantry and the armored divisions. Moreover, motorcycles were present in nearly all other Wehrmacht units, especially with the reconaissance units and the command, as well as the pioneer and the supply units. Produced in 16.500 units, the BMW R 75 together with the Zijndapp KS 750 formed the nucleus of the motorized units on all theatres of operations, especially in Africa and in Russia. The motorcycle was armored with an MG 34 mounted on the sidecar. On the road, it reached a maximum speed of 92 Km/h.
Model tanks
1:35 Ger. Sd.Kfz.167 Sturmgeschütz IV
510000223€30.99
Article number: 510000223 Product: 1:35 GER. Sd.Kfz.167 Sturmgeschütz IV The Sturmgeschütz IV was developed on the chassis of the Panzer IV medium tank to provide the German army with an assault gun capable of effectively serving as a tank destroyer in the later stages of World War II. The Stug IV was equipped with a Stuk40 75mm L/48 high-velocity gun installed in a casemate, protected by armored mantlet, capable of penetrating the armor of major enemy armored vehicles. Distributed to units in the early months of 1944, it supplemented and often replaced the Stug III assault gun, which had experienced a sudden decrease in production in 1943 due to increasingly frequent Allied bomber raids on German industrial areas. Widely deployed on the Eastern Front, the Stug IV was also utilized by armored units and anti-tank detachments of the Wehrmacht in Normandy, where its low profile proved to be particularly difficult to identify in the hedgerows of the French countryside. Warning! Not suitable for children under 14 years.
Model tanks
1:35 German Truck 3to. TYPE S
510000216€26.99
Article number: 510000216 Product: 1/35 German Truck 3to. TYPE S Model Dim.: 17,1 cm Registered by the Wehrmacht under the designation LKW 3,6-36 S 3t Blitz, this truck was the typical example of that practice of unification adopted in 1938 for the construction of civil transport means convertible into military vehicles. Actually, this truck - OPEL without BLITZ - was manufactured for commercial use featuring more or less the same characteristics.
Model tanks
1:35 Kfz. 69 Schwimmwagen
510000313€12.99
Article number: 510000313 Product: 1/35 Kfz. 69 Schwimmwagen Model Dim.: 10,9 cm including 3 figures Decals for one version As the Volkswagen 82 (Kubelwagen) proved very successful during the campaign in Poland, it was necessary to produce everincreasing numbers of this vehicle. Later, Ferdinand Porsche developed an amphibian version of this car, called the Schwimmwagen. The light weight of this vehicle (about 1/2 ton) permitted crossing of muddy areas, since only two men were sufficient to keep this vehicle moving. For reconnaissance and liaison missions, water had to be crossed frequently, which was impossible with other vehicles.
Model tanks
1:35 M-113 APC
510006753€29.49
The M113 can be considered one of the most famous APCs (Armoured Personnel Carriers) in history. It was developed in the late 1950s and early 1960s with the specific purpose of transporting a fully armed and equipped infantry squad with a good level of protection as close as possible to the combat zone. In addition to the tactical transport of the infantry squad, the M113 could provide close support to the troops through its onboard weapons, which, in the early versions, were limited to a 12.7 mm Browning M2 machine gun. First deployed in Vietnam, it became one of the most widely used armored vehicles in the world, with over 80,000 units produced. Reliable and robust, with good performance across all types of terrain, it was employed in various versions by numerous armed forces. Detailed plastic kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 Motorcycle side car Zündapp KS750
510000317€11.99
Article number: 510000317 Product: 1:35 Motorcycle side car Zündapp KS750 Model Dim.: 6,6 cm CONTAINS 3 FIGURES The Treaty of Versailles forbade the reconstruction of the German army. Nevertheless, its commanders evaded the obstacle by introducing vehicles of the civil production, which was not subject to any limitations. Thus they set up entire companies equipped with motorvehicles, developing in this way a "motorized mentality" among the crews. The Zündapp. with a production total of 18.000 units due to its structure which guaranteed easy and economical handling - was considered one of the most modern accomplishments of the age in the field of motorcycle construction. Because of its extraordinary qualities, the Zündapp could follow and escort the tank units of the Wehrmacht and the Waffen-SS to all theatres of operations, especially in Russia, since the side car was even furnished with heating for hands and feet of the man. Zündapps were distributed to all units of the armed forces, Only after 1943, they were replaced by 4-wheel vehicles. Detailed plastic kit of model Motorrad-Gespann Zündapp KS750 in scale 1:35
Model tanks
1:35 Sd. Anhänger 51
510006450€12.49
Article number: 510006450 Product: 1:35 Sd. Anhänger 51 Model Dim.: 7,6 cm CONTAINS 2 MODELS The Sd Anhänger 51 trailer could easily be used by a large number of Wehrmacht vehicles. The trailers have been developed to be used as ammo carriers and they were typically associated to anti-aircraft half-tracks armed with 20 mm Flak guns. During the Military campaigns the trailers were often fully loaded with any kind of materials. The lower "U" frame was extremely robust and suitable to be used on road and off road. Detailed Plastic Kit of model Sd. Anhänger 51 in scale 1:35
Military aeroplane models
1:48 FIAT CR.42 Falco Assa./Nig. Fighter
510002842€30.99
Starting from the great success of the C.R. 32 "Freccia" biplane, which proved its reliability and operational efficiency during the Spanish Civil War, Fiat developed the new C.R. 42 "Falco" at the end of the 1930s. The new single-seat biplane fighter retained the fixed landing gear and open cockpit of its predecessor but introduced several innovations, such as an entirely aluminum and steel structure covered with metal and fabric. Its air-cooled radial engine, the Fiat A.74, allowed the C.R. 42 to reach a top speed of 400 km/h. The aircraft was characterized by exceptional maneuverability, highly appreciated by pilots, but suffered from the inherent limitations of the biplane configuration, which hindered its operational performance compared to more modern and powerful monoplane fighters. Detailed plastic kit Warning! Not suitable for children under 14 years.
Model tanks
1/35 Sd.Kfz.251/1 Ausf.D w/Night Vision
540006984€85.05
Article number: 540006984 Product: 1:35 Sd.Kfz.251/1 Ausf.D w/Night Vision The Sd.Kfz.251 Ausf.D with Night Vision Falke was a special variant which was equipped with specialized night vision equipment, the vehicle was designed for reconnaissance and other missions at night and in low-light conditions. The key feature of it was its night vision equipment, which included a range of infrared and ultraviolet lights, as well as a specialized periscope that allowed the crew to see in the dark. Despite its advanced technology, this special variant was produced in limited numbers due to the high cost of the specialized equipment and the difficult production conditions in Germany during the war. The kit includes Magic tracks and a set of early version tracks. Additionally, a figure set of four Nachtjager soldiers is offered for free. Valuable metal width indicators and an array of photo-etched parts are also available to enhance the level of detail in the model. Detailed Plastic Kit
Military aeroplane models
1:12 F-104G Cockpit
510002991€34.99
Article number: 510002991 Product: 1:12 F-104G Cockpit Model Dim.: 14,7cm/9,0 cm 124 parts - Fully detailed real F-104 cockpit controls - Fully detailed Martin Baker Mk.I Q ejection seat - Complete cockpit dials decals - Adhesive acetate silk seat belts - Pilot’s helmet and oxygen mask - Pilot’s visor, gunsight and radar scope clear parts The Lockheed F-104 Starfighter is one of the most renowned fighters in aviation history and also the one with the longest operational service. Its history began at the end of the ‘50s and ended with some air forces in the mid-2000s. Its unique airframe, with slender fuselage and very little wing surface, made this aircraft ideal in an interceptor role. Due to the thrust of its General Electric J79-GE-11A afterburning turbojet engine it could exceed Mach 2,2 with a first class rate of climb. This scale model kit allows modelers to recreate the famous "Starfighter" cockpit with the typical internal layout of the ‘50s and ‘60s fighters, which was ‘home’ to many former NATO pilots. The fine detail of the instrument panel typical of the period, is matched by the highly accurate reproduction of the Martin-Baker ejection seat. Detailed plastic kit in scale 1:12
Military aeroplane models
1:32 Lockheed F-35A Lighting II
510002506€109.99
Article number: 510002506 Product: 1:32 Lockheed F-35A Lighting II Model Dim.: 49,0 cm 100% NEW MOULD - SUPER DECALS SHEET FOR 6 VERSIONS - PHOTO ETCHED PARTS - COLOURED INSTRUCTION SHEET AND NEW STICKERS MASKS SHEET The JSF Joint Strike Fighter program was set up to develop a new fifth-generation all-weather multirole combat aircraft a ble to replace the existing United States and NATO strike-fighters. The aerospace industry team led by Lockheed Martin generated the single-seat, single-engine, F-35 Lightning II. It adopts stealth technology and it is characterized by the trapezoidal wings and by the use of the most advanced hi-tech materials and avionic systems. Developed to perform air superiority, close air support and ground attack missions, it has been design in different configurations. The F-35A is the conventional takeoff and landing variant, the F-35B is the short takeoff and vertical landing variant and the F-35C, with foldable-wings, has been developed to be used from conventional deck carriers. Thanks to its operational flexibility, the advanced on-board technology and the impressive project innovation, the F-35 lightning II will be a reference aircraft in the twenty-first century military aviation. Deatailed plastic kit of model Lockheed F-35A Lighting II in scale 1:32
Military aeroplane models
1:32 Macchi MC. 202
510002518€104.99
Article number: 510002518 Product: 1:32 Macchi MC. 202 The introduction of the Macchi MC 202 Folgore was a significant development for the fighter squadrons of the Italian Regia Aeronautica. Stylishly designed from an aerodynamical perspective, it was fitted with the powerful German DB 601 engine produced under license by the Italian aeronautical industry. The engine and overall aeronautical performance of the aircraft provided the Regia Aeronautica with a fighter capable of actively engaging Allied fighters. The flight performance compared to the previous generation of fighters equipped with radial engines, such as the Fiat G-50 and the Macchi Mc-200, was in fact much better. Manoeuvrable and fast (it was able to reach 600 km h), it was armed, in the early versions, with two 12.7 mm Breda-SAFAT machine guns installed in the nose. Only in later versions were the armaments improved with additional machine-guns installed in the wings. Detailed plastic kit in scale 1:32
Military aeroplane models
1:32 Macchi MC.205 Veltro
510002519€104.99
The Macchi M.C. 205 Veltro is considered the best Italian fighter of World War II. The evolution of the "Folgore" retained the excellent aeronautical design of its predecessor and was equipped, like other fighters of the "Series 5", with the German Daimler-Benz DB605 engine. The powerful V12 engine, also produced under license by Fiat, allowed the Veltro to reach a maximum speed of 640 km/h. Fast, maneuverable, and well-armed, with 2 × 12.7 mm machine guns in the nose and 2 × 20 mm cannons in the wings, it was capable of fighting on par with the best Allied fighters of the period, such as the American P-51 Mustang. It entered service with the Regia Aeronautica in the early months of 1943. After the armistice of September 8, it was used, until the end of the conflict, by both the flight units of the Italian Social Republic and those of the Co-Belligerent Air Force. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Military aeroplane models
1:32 Tornado GR.4
510002513€144.99
Article number: 510002513 Product: 1:32 Tornado GR.4 Model Dim.: 52,1 cm 100% New Moulds PE Sheet – Rubber tyres & fuselage covers Super Decals Sheet Size of the model 52,1 cm The "Tornado" arose from a collaborative project between Italy, Germany, and the United Kingdom to produce a multi-role high-performance combat aircraft. The primary requirement however was to develop a ‘state of the art’ modern aircraft able to perform low-altitude penetrating strike missions. This need was met by the development of a twin-engine combat aircraft with a variable-sweep wing. The Tornado GR.1 (Ground Attack/Reconnaissance) was the initial version adopted by Royal Air Force in early ‘80s. In 1996 the Tornado was upgraded to the Gr.4 standard which was characterized by improved operational capabilities, new avionics systems for navigation and the adoption of new ‘on-board’ technologies. These systems enabled the effective identification and tracking of targets and the weapons management of the newer generation of weapons such as Paveway IV bombs and Storm Shadow cruise missiles. Detailed plastic kit in scale 1:32
Model tanks
1:35 Sd.Kfz.251/21 Ausf.D Drilling
540006862€88.99
Article number: 540006862 Product: 1:35 Sd.Kfz.251/21 Ausf.D Drilling The SdKfz 251/21, also known as the Mittlerer Schutzenpanzerwagen – Drilling MG 151, was a very effective production anti-aircraft version of the SdKfz 251 halftrack. Mounted with three excellent 15mm MG 151/15 or 20mm MG 151/20 machine guns on a compact pedestal behind a small armored shield, having a rate of 700 rounds per minute per gun, these modified SdKfz251 halftracks could provide very effective defensive fire against the Allied aircraft. Special Features: - Conical pedestal mount w/accurate detail - MG151 with detailed cradle - "ez-Track" specially for Sd.Kfz.251 - Early type individual track link included - Metal width indicator poles - Bonus aluminum barrel heads - Bonus crew uniform and boots - Various decal markings provided Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 1/4 Ton 4x4 US Ambulance Vehicle
510000326€11.99
Article number: 510000326 Product: 1:35 1/4 Ton 4x4 US Ambulance Vehicle Model Dim.: 11,8 cm Decals for 2 versions The ubiquitous jeep is perhaps the most all-round vehicle ever constructed. Because it xas ruggedly built and thus able to traverse most types of terrain without suffering structural damage, one of the task assigned to the jeep was that of ambulance service.
Model tanks
1:35 15cm Panzerwerfer 42 auf SWS
510006562€31.99
Article number: 510006562 Product: 1:35 15cm Panzerwerfer 42 auf SWS Length of the model 198 mm NEW DECAL SHEET The Schwerer Wehrmachtschlepper (SWS) was developed as a medium half-track and used to transport supplies to front-line troops or as a towing vehicle for the light artillery. However, on the large rear flat load compartment some other applications have been developed. One modification was the Panzerwerfer 42 auf SWS, a 10 barreled 15 cm Nebelwerfer 42 rocket launched placed over an armored ammunition storage compartment. The rocket launcher, developed as device to create smoke screens, was soon used as real artillery able to launch high-explosive ammunitions. It could shoot the rocktes with impressive and deadly. Detailed Plastic Kit of model 15cm Panzerwerfer 42 auf SWS in scale 1:35
Military figures & accessories
1:35 20' Military Container
510006516€21.99
Article number: 510006516 Product: 1:35 20' Military Container Model Dim.: 17,4 cm 100% NEW MOULD Decals for 3 versions The 20-feet freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container – in terms of size, volumes and loading capacity – makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has became more effective and faster. Even the warehouses and stocking areas management became easier and more flexible.Thanks to its features and flexibility the 20-feet container has been adopted by several Armies to optimize the logistic and the ground support activities.
Military figures & accessories
1:35 7.5cm Leichtgeschuetz 40 w/Crew
540006147€31.99
Article number: 540006147 Product: 1:35 7.5cm Leichtgeschütz 40 w/Crew Operation Marita. This is the name Germany gave its plan to invade Greece in April 1941. In fact, Germany stepped in after Italy’s failed invasion kicked off the preceding October. Greece had repelled that initial invasion and had even counterattacked by March 1941. Consequently, on 6 April, 680,000 German troops with 1,200 tanks and 700 aircraft launched their invasion of Greece from Bulgarian territory, bypassing the bulk of Greek troops near the Albanian border. The Metaxas defensive line was overrun, and small numbers of Australian, British and New Zealand troops could not stem the flow. By the end of the month, the Greek mainland was in German hands, and then German troops also landed on and captured Crete in May 1941. Of interest, next year will mark the 80th anniversary of Operation Marita, so Dragon has brought together a number of 1/35 scale figure sets that feature participants in that decisive campaign. This Dragon assortment features no fewer than six 1/35 scale figure sets depicting the Greek invasion, a campaign that has not received the publicity or attention that it perhaps deserves. All the figure sets represent German troops, including paratroopers, mountain troops, combat engineers and elite infantrymen. These realistic-looking figure sets depict different units, various uniforms and a range of weapons, giving lots of flexibility for model-makers to create a diorama. Few eyewitnesses of that military campaign in Greece remain alive, but modelers can recreate it through this prized figure collection. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 7.5cm RSO with PAK40
510000355€33.49
To better meet the logistical and transportation needs in the challenging environmental conditions of the Eastern Front, the Wehrmacht developed tracked tractors capable of towing various types of vehicles and transporting different loads, including ammunition and supplies. The official designation of this series of vehicles, which were highly versatile in operational use, was "Raupenschlepper-Ost" (Crawler Tractor-East). The RSO was predominantly built by the Austrian company Steyr, which also developed an anti-tank version that was simple and cost-effective to produce, armed with the reliable and formidable 75mm PaK40 cannon. The vehicle essentially had the same technical structure as the tractor and featured increased frontal protection, given its operational use in direct contact with the enemy. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 Bedford QL Truck
510000241€36.99
Article number: 510000241 Product: 1:35 Bedford QL Truck The Bedford QL line of military trucks was established in the late 1930s for the British Army to have a more modern and flexible transport vehicle. Following the conclusion of testing in 1940 and in early 1941, the Bedford QLs were distributed to Army Corps, Regiments and other Units. For the duration of the war it was deployed on various fronts, proving to be a highly effective support vehicle for meeting both logistical and transportation needs due to its four-wheel drive and relatively low weight which further enhanced its load capacity. With its flexibility and robustness, it was also used for towing and transporting artillery pieces such as the 6 pounder anti-tank gun and the 40mm Bofors anti-aircraft gun. Equipped with a 72 horsepower 6-cylinder petrol engine, it was also notable for its ease of maintenance and repair, an important feature on the battlefield. Detailed Plastic Kit
Military ship models
1:35 Biber Midget Submarine
510005609€30.99
Article number: 510005609 Product: 1:35 Biber Midget Submarine The model U-Boot Biber in scale 1/35 has a length of about 186 mm. Decals for one version. The "Biber" was the most well-known "pocket" submarine used by the Kriegsmarine during the latter part of World War II. The development of the Biber was extremely rapid. Design began in February 1944, and the first units were launched just 6 months later. Measuring just 9 meters long, it had a range of 240 km. It could reach a maximum speed of 6.5 knots surfaced and 5.3 knots submerged. The Biber could be armed with two 530 mm torpedoes, mounted externally to the submarine, or with two mines. Its crew consisted of only one person. The purpose of the Biber within the strategy of the Kriegsmarine was quite simple: to provide a concrete defense along the coasts to protect against a possible, and increasingly likely, Allied invasion. From 1944 until the end of World War II, the Kriegsmarine received and deployed over 300 Bibers.
Model tanks
1:35 Brit. Crusader Mk.III w/ Tank crew
510006592€36.99
Article number: 510006592 Product: 1:35 Brit. Crusader Mk.III m. Besatzung Designed at the beginning of the Second World War, the Crusader was one of the most important British "Cruiser" tanks reaching a production of over 5,000 units. Equipped with Christie suspension with large diameter rolling wheels, the Crusader possessed remarkable driving skills on rough terrain. The first versions of Mk. I and Mk. II were armed with a 2 pdr cannon. later replaced by the more powerful 6 pdr cannon. in the Mk.III version. Lacking adequate armor against enemy fire, it was also very vulnerable to enemy mines and anti-tank guns, and its armament was often inadequate in front of similar German vehicles. However, when used in a coordinated way, they managed to achieve good results. Detailed plastic kit
Model tanks
1:35 Commando Car
510000320€12.49
Article number: 510000320 Product: 1/35 Gefechtswagen Model Dim.: 9,5 cm 1 FIGURE INCLUDED Much work was carried out in the USA and Britain to design special airborne vehicles to drop behind the enemy lines. Willys MB-Jeeps engaged in helping the Infantry by clearing snipers and other commando tasks. Generally manned by a sergeant and a trooper this vehicle was modified in many respects. It was armed with no fewer than five machine guns and had additional tanks for 135 l. of fuel.
Model tanks
1:35 Dt. Sd.Kfz.138 Marder III Ausf. H
510006566€31.99
Article number: 510006566 Product: 1:35 Dt. Sd.Kfz.138 Marder III Ausf. H The tank destroyer Marder III Sd.Kfz. 138 was developed for the Wehrmacht on the basis of the now obsolete Czechoslovak-made Panzerkampfwagen 38(t). It went into production in 1942 for the needs of the eastern operation area and was used on all fronts until the end of the war. A major improvement was the installation of an effective 75 mm anti-tank gun protected by a slanted steel shield. In order to better protect the soldiers, the engine was placed in the rear part of the vehicle and the weapon system in the middle. With the Marder III, the Wehrmacht had an easy-to-manufacture tank destroyer with high firepower that was capable of fighting the most important tanks of the time. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35 Warning! Not suitable for children under 14 years.
Model tanks
1:35 Dt. SdKfz. 234/2 Puma 8-Rad
510006572€35.99
Article number: 510006572 Product: 1:35 Dt. SdKfz. 234/2 Puma 8-Rad The German armored car ‘Schwerer Panzerspähwagen Sd.Kfz. 234/2’ known as "Puma", was developed and produced by the German war machine in the closing years of WW2. The vehicle proved to be an excellent mix of mobility, protection and firepower which was built upon the operational experience gained by the Wehrmacht in the early stages of the conflict. From 1939 onwards the German army had used armored vehicles very effectively for advanced reconnaissance tasks, and also in a ground support role for its troops. The "Puma" was initially a reconnaissance vehicle, but due to its KwK 39 L / 60 50 mm gun it could also be used equally effectively in offensive actions against infantry and other armored vehicles. It was deployed in limited numbers on both the Eastern and Western fronts. The highly effective independent suspension system of the eight wheels and the powerful engine, enabled the Puma to reach speeds of up to 90 km/h on all types of battlefield terrain. Detailed plastic kit in scale 1:35
Model tanks
1:35 DUKW Amphibious vehicle
510006392€32.99
Article number: 510006392 Product: 1:35 DUKW Amphibious vehicle To meet the logistical needs of the US Army landing forces in transferring loads quickly and efficiently from ships to beaches, the American General Motor CCKW-353 2½ t 6x6 amphibious version tactical transport truck was designed and built for this purpose. The basic vehicle components were the same as the GMC road truck with its 4,400 cm3 6-cylinder engine, three differentials and six driving wheels. The DUKW was characterized by a welded hull to make it amphibious, which was then reinforced by horizontal ribs. Its key attribute however was its extraordinary versatility and load capacity. It could carry a 2,400 kg payload or 25 fully equipped troops. DUKWs were deployed extensively in all theaters of war by the U.S. Army, U.S. Marines and the armed forces of numerous Allied countries. Notably, they featured in many significant WW11 beach landings including the D-Day Normandy landings at Utah and Omaha and also at Salerno, Anzio and on the beaches of the Pacific campaign. Kit, instructions, decor
Military figures & accessories
1:35 Georgian Legion (Normandy 1944)
540006277€16.79
Article number: 540006277 Product: 1:35 Georgian Legion (Normandy 1944) We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Model tanks
1:35 Ger. Panzerjäger I
510006577€31.99
Article number: 510006577 Product: 1:35 Ger. Panzerjäger I Model Dim.: 12,6 cm NEW GLUEABLE RUBBER TRACKS - DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET - PHOTO-ETCHED FRET CONTAINS 1 FIGURE The self-propelled Panzerjager I tank destroyer was built on the hull of the Panzer I light tank and armed with an effective weapon of the period, the 47mm Czechoslovakian anti-tank gun. The Panzer I tank had in fact a protection and armament capability no longer in keeping with the operational needs of the German armoured divisions. However, it had good mobility and a robust chassis which was ideal for the positioning of the anti-tank gun, which was sited behind an open steel shield. The Panzerjager I was deployed by the Wehrmacht during the invasion of France, in North Africa and in the early stages of Operation Barbarossa in 1941. It held a goodammunition supply, with over 70 rounds available for gunners. It was systematically replaced during the war bymore heavily armored tank destroyers, better equipped to deal with modern tank armor against which the 47 mm gun proved to be ineffective. Detailed Plastic Kit
Model tanks
1:35 Ger. Sd.Kfz.140 Flakpanzer 38 Gep.
510096461€36.99
The Sd. Kfz. 140 Flakpanzer 38 "Gepard" self-propelled anti-aircraft vehicle was developed during World War II using the chassis of the Czechoslovak-designed light tank Panzer 38(t). Its primary purpose was to provide the Wehrmacht with an effective means of protecting armored units and moving columns against aerial attacks. The mechanical reliability and maneuverability offered by the 38(t) chassis served as the technical foundation for mounting a 20 mm Flak 38 anti-aircraft gun on a rotating, shielded platform to protect the crew. The main weapon was often utilized not only against aircraft but also in engaging fixed positions and supporting ground troops in close combat situations. Over time, the Gepard was progressively supplemented in the anti-aircraft role by other self-propelled systems with greater firepower, such as the Wirbelwind and the Ostwind. Detailed plastic kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 Ger. Sd.Kfz.234/1 (2cm)
510006757€36.99
The armored cars of the Schwerer Panzerspähwagen Sd.Kfz. 234 series were produced by the German war industry during the final phase of the Second World War. They were distinguished by their high manufacturing quality, combining mobility, operational flexibility, and offensive capability. The design represented an excellent balance of all-terrain speed, protection, and firepower, effectively incorporating the operational experience gained by the Wehrmacht during the early years of the conflict. On roads, the vehicle could reach a top speed of 85 km/h. Among the various versions produced, the Sd.Kfz. 234/1 often served as a command vehicle. Also deployed in forward reconnaissance missions, it was equipped with a 20 mm KwK 30 cannon mounted in an open-topped turret, capable of providing infantry support fire against lightly armored targets. Detailed plastic kit Warning! Not suitable for children under 14 years.
Military figures & accessories
1:35 German Combat Unit (Normandy 1944)
540006003€16.79
Article number: 540006003 Product: 1:35 German Combat Unit (Normandy 1944) We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Military figures & accessories
1:35 German MG42 Heavy Machine Gun Team
540006064€18.99
Article number: 540006064 Product: 1:35 German MG42 Heavy Machine Gun Team We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Military figures & accessories
1:35 German Tank Crew 1944/45
540006014€14.29
Article number: 540006014 Product: 1:35 German Tank Crew 1944/45 We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Model tanks
1:35 GMC 2 1/2Ton.Truck"D-Day 80th Ann."
510006271€25.99
Article number: 510006271 Product: 1:35 GMC 2 1/2Ton.Truck"D-Day 80th Ann." The GMC 2 ½ ton truck was built in an exceptionally high number of units and can be considered the backbone of the logistical operations of the U.S. Army during World War II. Characterized by a very robust and reliable structure, its strength lay in its excellent off-road performance, thanks to its six-wheel drive and effective suspension design. It was produced in numerous variations, including the more common "cargo" versions with open or closed cabins, "long wheelbase," and "short wheelbase." Additionally, various configurations, some developed directly in the field, were tailored for more specific and precise purposes. Its role was crucial in meeting the demanding logistical needs following the initial stages of the Normandy landings, involving the transportation and handling of substantial quantities of troops and materials. Detailed plastic kit Warning! Not suitable for children under 14 years.
Military figures & accessories
1:35 Gren.,Pz.Gren.Rgt.25,HJ Div.(1944)
540006110€16.79
Article number: 540006110 Product: 1:35 Gren.,Pz.Gren.Rgt.25,HJ Div.(1944) We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Model tanks
1:35 HEMTT Gun Truck
510106510€41.99
Article number: 510106510 Product: 1:35 HEMTT Gun Truck Model Dim.: 28,0 cm FULLY UPGRADE MOULDS Decals for one version The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. In a lot of conflicts, as in Iraq and Afghanistan, it has been often modified by the field workshops, on the specific requirements of the crews, in order to be more and more effective in the hard operating environments, Furthermore some HEMTT versions have been modified to be used in escort and convoys protection duties. Some additional protections and defensive weapons have been add on.
Model tanks
1:35 HMMWV M966 TOW Carrier
510006598€24.99
Article number: 510006598 Product: 1:35 HMMWV M966 TOW Carrier The military vehicle developed for the US Army with the acronym HMMWV ( High Mobility Multipurpose Wheeled Vehicle ), universally known as the "Humvee", is representative of the technological evolution of US "know-how" applied to the creation of extremely flexible, ‘all-condition’ vehicles of which even the "Willys", is still an icon today. The "Humvee" went into production during the 1980s and is characterized by its large dimensions and operational flexibility, due in part to the four-wheel drive and the robust structure, which can withstand the most challenging operational and environmental conditions. Different versions were made for roles such as troop transport, logistics, advanced reconnaissance and target acquisition. The M966 Tow Carrier version was equipped with a Tow missile system mounted on the roof of the vehicle in order to increase the Humvee's offensive potential against tanks and other armored vehicles. Detailed plastic kit in scale 1:32
