Maquette militaires
Stratégique, technique, détaillé : le modélisme militaire te propose tanks, avions, navires et bien plus – pour construire des scènes historiques fidèles à l’échelle.
Maquettes chars
1/72e Ensemble de maquettes M-1 Abrams
510072004€30.99
Le char d’assaut de troisième génération M1 Abrams constitue l'épine dorsale des divisions blindées de l'armée Américaine et du Corps des Marines. L'Abrams se caractérise par son blindage lourd (il compte parmi les véhicules de combat les plus lourds au monde) et l'adoption du puissant moteur à turbine multi-carburant. Une grande attention a été portée à la protection de l'équipage grâce au dépôt de munitions séparé et fortement protégé. Le M1 Abrams, qui est entré en service opérationnel au début des années 80 pour remplacer les anciens M-60, offre un système sophistiqué de conduite de tir et un blindage moderne. D'abord armé d'un canon de 105 mm, il a ensuite été équipé du canon de 120 mm le plus moderne et le plus puissant avec un tube lisse capable d'utiliser une variété différente de projectiles. L'Abrams a été largement utilisé, avec une efficacité létale, sur tous les grands théâtres opérationnels, du Moyen-Orient à l'Afghanistan, s'avérant être supérieur à tout autre char adverse.
Maquettes chars
1:24 Jeep Willys MB 80th Anniversary
510003635€37.99
Italeri presents the 1:24 Willys Jeep MB "80th Anniversary" as a detailed plastic kit built around one of the most recognizable light utility vehicles of the Second World War. The model combines the compact proportions of the original Willys Jeep MB with an open body, folded windshield, canvas top, rear spare wheel and side-mounted equipment, creating a display piece with strong period character. The 1:24 scale gives the build enough room for visible chassis, interior and exterior detail, while the commemorative 1941-2021 edition framing ties the subject to 80 years of Jeep history. A decal sheet for 6 versions expands the finishing options with different markings and service identities, including U.S. Army and U.S. Navy Seabees subjects shown in the reference material. The kit also uses rubber tyres, with 5 tyres included to complete the wheel set and spare. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the combination of body panels, interior fittings, exterior tools and marking choices supports a focused, step-by-step build with plenty of visual change as the jeep takes shape. Once painted and decaled, the finished Willys Jeep MB sits naturally in a military vehicle collection, on a diorama base, or alongside other 1:24 scale subjects with its compact wartime silhouette and distinctive utility details.
Maquettes avions militaires
1:32 F-104G/S - RF-104G Starfighter
510002514€104.99
Italeri F-104G/S - RF-104G Starfighter - Upgraded Edition brings the sharp lines of the Lockheed Martin aircraft into a 1:32 scale plastic kit with Pod Orpheus parts for an RF configuration. The long fuselage, pointed nose and external stores create a striking bench presence while the larger scale leaves room for a more involved finish across panels, markings and equipment. The assembly kit is designed for builders aged 14+ and develops over 600 minutes, giving time to work through subassemblies, alignment and paint stages with care. Photo-etched parts add finer metal detail where thinner components matter visually, especially when the model is viewed up close. The marking set goes beyond basic insignia: the decal sheets carry serials, rescue arrows, no-step stencils, squadron badges and national symbols that help define different service appearances. Markings for equipment such as Pod Orpheus and other airframe details support a more technical finish across pylons, tanks and reconnaissance fittings. On the workbench, the larger 1:32 format suits careful painting, decal placement and weathering, whether the focus is a cleaner operational look or a more used airframe. Once completed, the Starfighter's slim silhouette, metallic surfaces and variant-specific markings give the aircraft a strong display character in a collection of modern military aviation subjects. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes avions militaires
1:32 Lockheed F-35A Lighting II
510002506€109.99
Italeri presents the Lockheed F-35A Lighting II as a 1:32 assembly kit that turns the lines of a fifth-generation combat aircraft into a large-format model with real visual impact. With an assembled length of 49.0 cm, the finished aircraft gives the stealth-style fuselage, trapezoidal wings and twin outward-canted vertical stabilizers enough scale to stand out clearly on a shelf or in a collection. The subject represents the F-35A conventional takeoff and landing variant from the Joint Strike Fighter program. As a single-seat, single-engine multirole aircraft, it combines air superiority, close air support and ground attack roles in one airframe, giving the build a strong contemporary aviation focus. The new mould tooling supports sharply defined surface detail across the fuselage and flying surfaces, while photo-etched parts introduce finer elements that reward careful handling during construction. The decal sheet covers 6 versions and includes service markings, rescue arrows, warning stencils, serials, insignia and ordnance markings for a more specific finished appearance. This assembly project is marked for ages 14+ and lists an assembly time of 600 minutes, making it a substantial bench build rather than a quick weekend task. Painting, masking and final decal placement shape much of the finished character, especially around the canopy, panel areas and external markings. The result is a detailed modern jet model that suits display alongside other military aircraft in 1:32 scale.
Maquettes avions militaires
1:32 Macchi MC. 202
510002518€104.99
Référence article: 510002518 Produit: 1:32 Macchi MC. 202 Le Macchi MC 202 Folgore a constitué une nette innovation pour les détachements des avions de chasse de la Régie Aéronautique. Extraordinairement beau d'un point de vue aérodynamique, il était équipé des puissants moteurs en ligne allemands DB 601, produits sur licence par l'industrie aéronautique italienne. Les nouvelles motorisations et la solidité du projet aéronautique ont équipé la Régie Aéronautique d’avions de chasse en mesure de combattre « à égal » avec ceux des alliées. Les performances de vol, comparées aux avions de chasse de la génération précédente équipés de moteurs radiaux tels que le Fiat G-50 et le Macchi Mc-200, étaient en effet bien meilleures. Manœuvrable et rapide (il pouvait atteindre 600 km/h), il était armé dans les premières versions de deux mitrailleuses Breda-SAFAT calibre 12,7 mm installées sur le nez. Ce n'est que dans les versions ultérieures que l'armement a été renforcé pour le rendre plus apte au combat aérien contre les avions de chasse Américains et Britanniques.
Maquettes avions militaires
1:32 Macchi MC.205 Veltro
510002519€104.99
Le Macchi M.C. 205 Veltro est considéré par beaucoup comme le meilleur chasseur italien de la Seconde Guerre mondiale. L'évolution du "Folgore" a conservé le design aéronautique excellent de son prédécesseur et a été équipée, comme les autres chasseurs de la "série 5", du moteur allemand Daimler-Benz DB605. Le puissant moteur à 12 cylindres en V, également produit sous licence par Fiat, permettait au Veltro d'atteindre une vitesse maximale de 640 km/h. Rapide, maniable et bien armé, avec l'adoption de 2 mitrailleuses de 12,7 mm dans le nez et de 2 canons de 20 mm dans les ailes, il était capable de combattre à égalité avec les meilleurs chasseurs alliés de l'époque comme le P-51 Mustang américain. Il entra en service dans les premiers mois de 1943 avec la Regia Aeronautica. Après l'armistice du 8 septembre, il fut utilisé, jusqu'à la fin du conflit, à la fois par les unités de vol de la République Sociale Italienne et par celles de l'Aeronautica Cobelligerante. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:32 TORNADO GR.1 Desert Storm
510002521€129.99
Tornado GR.1 Desert Storm brings the British Royal Air Force strike aircraft into a 1:32 model kit format with a strong focus on the aircraft used during the 1991 Gulf War. The larger scale gives the twin-engine, two-seat layout room to stand out, while the swept wing profile gives the finished aircraft a recognisable combat silhouette. The original Tornado project grew from a collaboration between Italy, Germany and the United Kingdom to create a high-performance multirole combat aircraft. In GR.1 form, the aircraft served as the British Royal Air Force designation of the Tornado IDS, the Interdictor/Strike variant developed for attack missions. Its variable-geometry wings were part of a design shaped for low-altitude supersonic strike work and terrain-following flight, giving this subject a clear technical identity beyond its Desert Storm markings. The 14 years marking places this build in a more advanced model-making range. On the bench, the 1:32 format gives space to appreciate the aircraft's long fuselage, two-seat cockpit arrangement and mission-driven wing geometry as the build takes shape. Once completed, the GR.1 theme and Desert Storm setting give the aircraft a strong presence in military aviation displays centred on Royal Air Force subjects or late 20th century combat aircraft.
Maquettes avions militaires
1:32 Tornado GR.4
510002513€144.99
Italeri Tornado GR.4 is a detailed 1:32 aircraft model kit that brings the distinctive lines of the RAF strike aircraft into a large 52.1 cm format. The twin-engine jet is reproduced with variable-sweep wings, giving the finished build the characteristic stance of the full-size Tornado whether shown in a more compact swept configuration or with the wings extended. The subject represents the GR.4 standard, the upgraded version with revised avionics and mission capability. The kit is based on 100% new moulds and uses photo-etched parts for finer detail in key areas. An openable radome exposes the radar installation, while the removable RB.199 engine can be set on its dedicated support trolley for a maintenance-style display. Retracted or extended flaps and slats, plus movable ailerons, allow the airframe to be finished with a more tailored parked or service configuration. Rubber tyres and rubber covers for the wing entry points into the fuselage add material variation where the original aircraft shows flexible sealing surfaces and weighted undercarriage details. A super decals sheet supports 4 R.A.F. versions, including standard service schemes and special livery subjects, with markings for the airframe, cockpit instruments, pylons, tanks and selected stores. This gives the build several authentic finishing directions, from operational squadron aircraft to commemorative presentation schemes. The kit is designed for ages 14+ and requires assembly. Assembly time is 600 minutes.
Maquettes chars
1:35 1/4 Ton 4x4 Ambulance Jeep
510000326€11.99
Italeri 1:35 1/4 Ton 4x4 US Ambulance Vehicle captures a field-converted military jeep in a compact 11.8 cm scale model that brings the ambulance role of this well-known 4x4 into clear focus. The assembly kit centers on the distinctive rescue layout, where the familiar open vehicle form is reworked with stretcher-carrying structures and medical insignia for a markedly different silhouette. The 1:35 scale suits detailed finishing work, especially across the body panels, grille, wheels, cabin area, and external ambulance fittings visible in the kit presentation. Decals for 2 versions open two historically themed directions, covering U.S. 2nd Armoured Division Normandy 1944 and British Army Normandy 1944. That choice changes the final look through unit markings and insignia rather than altering the core vehicle, which keeps the build focused while still offering variation. Assembly takes 600 minutes, giving time for careful handling of the construction stages and for a measured paint approach across the military surfaces and medical markings. On a shelf, the completed ambulance jeep reads clearly as a support vehicle rather than a standard utility 4x4, with its stretcher layout setting the scene at a glance. In a 1:35 display, it can anchor a Normandy-themed arrangement, sit beside other military vehicles, or stand alone as a compact historical model with a strong service identity.
Maquettes chars
1:35 7.5cm RSO with PAK40
510000355€33.49
Pour mieux répondre aux exigences logistiques et de transport dans les conditions environnementales difficiles du front de l'Est, des tracteurs chenillés furent développés pour la Wehrmacht. Ces véhicules étaient capables de remorquer plusieurs types de véhicules et de transporter divers chargements, notamment des munitions et des vivres. La désignation officielle de cette série de véhicules, extrêmement polyvalents dans leur utilisation opérationnelle, était "Raupenschlepper-Ost" (tracteur à chenilles de l'Est). L'RSO fut principalement fabriqué par l'entreprise autrichienne Steyr, qui développa également une version antichar, simple et économique à produire, armée du redoutable et fiable canon PaK40 de 75 mm. Le véhicule conservait essentiellement la même structure technique que le tracteur, mais était doté d'une protection avant renforcée, compte tenu de son utilisation opérationnelle en contact avec l'ennemi. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 90mm Gun Motor Carriage M36B1
510096538€31.99
The Italeri M36B1 brings a late-war American tank destroyer into 1:35 scale with the combination of a Sherman M4A3 hull, an open-topped turret and the prominent 90 mm M3 gun. That layout gives the finished build the purposeful stance of a vehicle developed during the Second World War to answer heavily armored German tanks such as the Panther and Tiger. This detailed plastic kit represents the M36B1 variant, which adapted available Sherman M4A3 hulls to support American production capacity while carrying the stronger gun armament associated with the M36 series. The 90 mm M3 gun replaced the earlier 76 mm weapon used on the M10, changing both the vehicle's combat role and the visual balance of the upper structure. The open turret design, used on American tank destroyers, increased battlefield visibility and gives the model a fighting compartment that remains more exposed during painting and finishing. The shared hull lineage with the M10 also places the M36B1 within a clear development path of U.S. armored vehicles. On the workbench, the mix of hull, turret and gun details creates a military modeling subject with strong historical identity. Once completed, the M36B1 suits diorama scenes, shelf display and collections focused on World War II armor or postwar service vehicles, reflecting the type's long operational use in several armies and conflicts. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 Accessoires
510000407€9.49
Italeri 1:35 Accessories is a model kit built to add field equipment and combat detail to military dioramas. The set combines miniature weapons, storage pieces and personal gear in one scale, so vehicle displays, infantry positions and terrain sections can be arranged with more visual structure and period character. Among the included parts are an 81 mm mortar with ammunition boxes, Browning M1919 A4 machine guns, BREN Mk. II guns, Thompson M1928 A1 submachine guns, Sten Mk. II guns, Garand M1 rifles, Lee-Enfield Mk. I rifles, Winchester M1 rifles and a 60.3 mm bazooka. The set also adds helmets, grenades, binoculars, pouches, sacks, satchels, a jerry can and several wooden and metal crates. This mix supports different scene layouts, from a dug-in firing point to a supply area beside a parked vehicle. Because the parts are all scaled to 1:35, they can be distributed across terrain, figures and vehicle surroundings without breaking the visual proportion of the build. The 600-minute assembly time points to a project with room for careful preparation, painting and placement. On a shelf, the accessories can frame a tank, truck or artillery piece with extra context. On a diorama base, the same parts can mark out ammunition storage, infantry equipment drops or a support weapon position, giving the finished scene more depth than a vehicle-only display.
Figurines militaires et accessoires
1:35 Angle de maison
510006413€9.49
Italeri House Corner is a 1:35 scale assembly kit that brings a ruined urban facade into military and historical dioramas. The structure depicts a damaged house corner with a large open doorway, broken wall sections and exposed brick areas, creating a strong architectural focal point for street scenes, checkpoints or battle settings. The wall treatment combines cracked plaster, red brick texture and decorative stone trim, so painted finishes can shift between worn masonry, dust, soot and age marks with clear surface variation. The multi-story layout adds vertical presence without closing off the scene, while the open sections leave sightlines around figures, vehicles and ground details. A central support structure helps hold the wall halves together and reinforces the cross-section form shown in the build. Assembly is required, and the stated assembly time is 600 minutes. Placed at the edge of a road section, beside a vehicle, or as the backdrop to a figure group, the facade helps frame action without overwhelming the rest of the layout. It also works as a standalone scenery element for display shelves where damaged masonry, broken ledges and open architectural lines add depth to a compact footprint. The set contains the assembly kit.
Figurines militaires et accessoires
1:35 Atelier de campagne
510100419€9.49
Italeri Field Tool Shop brings a 1:35 scale maintenance area into a model scene with a broad selection of workshop accessories and service equipment. The assembly kit is built around the look of a field repair station, where lifting gear, hand tools and storage pieces turn open ground or a vehicle bay into a convincing working environment. The set uses unassembled parts on sprues and covers several distinct equipment types for diorama building. Visible components include a gantry crane marked 2 t with a hanging hoist, an anvil on a stump, a wheeled air compressor, gas cylinders, a twin-cylinder trolley, a workbench, a vise, barrels, crates, a toolbox and a ladder. Smaller accessories such as shovels, pickaxes, hammers, wrenches, hooks and jack-like lifting tools help fill benches, walls and floor space with scale detail. The mix of larger structures and fine workshop pieces supports layered layouts, from compact repair corners to busier maintenance yards. With 600 minutes of assembly time, the build suits model makers who want to spend time arranging and finishing a service scene around vehicles, figures or depot settings. The 1:35 scale format fits naturally into military and industrial dioramas, where compressors, cylinders and lifting frames can be positioned to suggest ongoing repair, loading or mechanical work.
Maquettes chars
1:35 Attelage de moto Zündapp KS750
510000317€11.99
Italeri Zündapp KS750 with Sidecar captures a well-known military motorcycle combination as a 1:35 scale plastic model kit with a finished model length of 6.6 cm. The compact format gives the motorcycle, sidecar and crew a clear place in vehicle collections and historical diorama scenes while keeping the build focused on fine mechanical detail. The kit contains 3 figures, adding more than a standalone vehicle silhouette to the finished result. Seated and standing crew poses help shape a fuller field scene around the sidecar outfit, while the molded parts support careful painting of uniforms, equipment and vehicle details. The decal sheet provides multiple registration and insignia options, including versions for Italy 1944/45 and Normandy 1944, plus smaller technical markings such as tyre pressure stencils. This creates room for a more specific historical finish rather than a single fixed appearance. Assembly is required, with a stated assembly time of 600 minutes. The build suits ages 14 years and up and works well as a longer bench project where painting, decal placement and figure arrangement all contribute to the final presentation. Assembly kit included.
Maquettes chars
1:35 Bedford QL Truck
510000241€36.99
Référence article: 510000241 Produit: 1:35 Bedford QL Truck La gamme de camions militaires Bedford QL a été créée à la fin des années 1930, à la demande de l'armée britannique, afin de disposer d'un véhicule de transport plus moderne et plus flexible. Les tests ont été achevés en 1940 et c’est au début de l’année 1941 que les Bedford QL ont été distribués aux services opérationnels. Pendant toute la durée de la guerre, il fut utilisé sur les différents fronts et s'avéra être un support valable pour satisfaire les besoins de logistique et de transport grâce à ses quatre roues motrices et son poids relativement faible qui augmentait sa capacité de charge. En raison de sa flexibilité et de sa robustesse, il a également été utilisé pour remorquer et transporter des pièces d'artillerie telles que le canon antichar 6 Pdr ou le canon antiaérien Bofors de 40 mm. Équipé d'un moteur à essence 6 cylindres de 72 chevaux, il se caractérise également par sa facilité d'entretien et de réparation, un élément important sur les champs de bataille.
Maquettes chars
1:35 Big Set Kharkiv'43 Tram/StugIIICrew
550036067€119.99
MiniArt Kharkiv 1943 brings a dense wartime street scene into 1:35 scale with a detailed plastic model kit built around a tramway, a StuG III Ausf. G and 13 figures. The combination of vehicle, transport infrastructure and street furniture creates a single diorama composition that reads as an urban moment rather than a standalone military vehicle build. The set belongs to the Dioramas Series and extends beyond the central subjects with road signs, a tram support and a dedicated base. That broader structure gives the scene clear spatial relationships between the tram, the assault gun and the surrounding figures. PE parts are included, allowing finer treatment on selected details where thinner metal components suit the scale better than moulded parts alone. The figure group is specified as crew and panzergrenadiers, which adds human scale and movement to the layout through seated, riding and standing placements. Visible sign markings such as Starii Saltov, Woltschansk, Poltava, Belgorod and Sumskaja reinforce the Kharkiv 1943 setting named by the kit. On a workbench, the mix of rail vehicle, armored vehicle and street elements supports a build with varied shapes, surfaces and finishing tasks. Once completed, the base keeps the full arrangement together for cabinet presentation, with the tram support, signs and figures helping the scene read from several viewing angles. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 BMW R 75 avec side-car
510000315€11.99
The Italeri 1:35 BMW R 75 with Side Car assembly kit brings a historic military motorcycle into a compact display format, combining the distinctive sidecar layout with a finished model length of 6.6 cm. The subject represents the BMW R 75, a machine used in motorized units, and the sidecar-mounted MG 34 adds a clear mechanical focal point to the build. Beyond the motorcycle itself, the kit contains 3 figures that help shape a fuller scene around the vehicle. Their presence supports diorama planning with a stronger sense of movement, command or field transport rather than leaving the finished model as a standalone machine. The source subject also carries a recorded road speed of 92 km/h, a detail that underlines the fast dispatch role associated with this type of motorcycle. A decal for 1 version gives the finishing stage a defined marking option for the completed build. With a stated assembly time of 600 minutes, this model suits a slower, more deliberate build rhythm that leaves space for painting, fitting and display planning. On a shelf, in a cabinet or as part of a 1:35 military scene, the motorcycle, sidecar and figures create a compact composition with clear historical character. Age 14 Years+
Maquettes chars
1:35 Brit. Crusader Mk.III avec. Équipage
510006592€36.99
The Italeri Crusader Mk.III with British Crew brings a key British cruiser tank of the Second World War into 1:35 scale, pairing the later Mk.III configuration with a full crew scene for a display that goes beyond the vehicle alone. The build centers on the Crusader's desert-war profile, with its 6 pdr cannon and the distinctive running gear layout that made the type notable in rough terrain operations. This plastic kit is designed as a detailed assembly project and lists an assembly time of 600 minutes, giving the tank and figures room for a more involved finish. The Christie suspension with large diameter rolling wheels is part of the Crusader's defining engineering, and that layout gives the completed model a recognisable stance. Gluable rubber tracks shape the lower hull with flexible track runs, while the marking sheet supplies decals for 3 versions with serial numbers and tactical signs. The set also contains 9 figures, opening up options for command, maintenance and rest-scene arrangements around the tank. On a shelf, in a desert diorama or as part of a wider WWII armour collection, the combination of vehicle and crew creates a fuller historical scene than a tank alone. Paints and tools are required separately.
Maquettes chars
1:35 Camion allemand 3to. Type S
510000216€26.99
Italeri German Truck 3to. TYPE S brings a 1938 standardised transport vehicle into 1:35 scale as an assembly kit with a finished length of 17.1 cm. The shape of the cab, the cargo bed with side panels and the covered rear load area give the model the look of a working truck built for practical hauling duties in a military context. The subject is tied to the designation LKW 3,6-36 S 3t Blitz used by the Wehrmacht, reflecting the wider move toward unified civil transport designs that could be converted for military use. That background gives the build a specific historical frame rather than a generic truck theme. The model centres on the vehicle itself, making it suitable for display on its own or as part of a period diorama with roads, depots or field transport scenes. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the 1:35 format supports careful painting, weathering and finishing work across the cab, chassis area and rear body sections. Once completed, the 17.1 cm truck fits naturally into historic vehicle collections and scale scenes where cargo transport, logistics and support vehicles define the atmosphere. Paints and tools are required separately.
Maquettes chars
1:35 Camion GMC 2 1/2 tons "D-Day 80th Ann.
510006271€25.99
Référence article: 510006271 Produit: 1:35 GMC 2 1/2Ton.Truck"D-Day 80th Ann." Le camion GMC de 2 ½ tonnes a été construit en très grand nombre et peut être considéré comme l'épine dorsale de la logistique de l'armée américaine pendant la Seconde Guerre mondiale. Caractérisé par une structure très robuste et fiable, dont la force réside dans ses bonnes performances « tout-terrain » grâce à ses six roues motrices et au design efficace des suspensions, il a été produit dans de nombreuses variantes. Outre les versions « cargo » les plus courantes, avec cabine ouverte ou fermée, à « pas long » et à « pas court », des configurations ont également été développées, dont certaines fabriquées directement « sur le terrain », pour des utilisations plus spécifiques et ponctuelles. Son rôle a été crucial pour répondre aux besoins logistiques exigeants qui ont suivi les premières étapes du débarquement en Normandie, avec le transport et la manutention de quantités impressionnantes de troupes et de matériaux. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Carro Armato P40
510006599€36.99
Les premières années de la guerre ont mis en évidence l'inconsistance des chars Medi italiens dans un scénario opérationnel caractérisé par la guerre de mouvement, les affrontements entre véhicules lourdement armés et blindés, et l'utilisation d'armes antichars plus efficaces et plus meurtrières. Grâce à l'analyse des chars allemands et des principaux adversaires de l'époque, britanniques et soviétiques, un char lourd de 26 tonnes a été mis au point. Le nouveau char, qui a subi plusieurs modifications de conception au fil du temps, présentait des caractéristiques modernes telles que des plaques frontales inclinées, un moteur diesel de 420 CV plus puissant et plus performant et un armement principal plus adapté à un usage opérationnel avec l'adoption du canon 75/34 Ansaldo. Cependant, le P26/40, nom définitif du char, conserve certaines solutions qui ne sont plus adaptées à l'époque et qui caractérisent la production de véhicules blindés italiens depuis le milieu des années 30 : les rivets de blindage et les suspensions à ressort à lames.
Maquettes chars
1:35 Chasseur de chars. VI Tiger I version E production tardive
510006754€30.99
Référence article: 510006754 Produit: 1:35 Pz.Kpfw. VI Ausf. E late production Le Panzerkampfwagen VI Ausf. Tiger I est certainement l'un des chars de combat les plus célèbres de la Seconde Guerre mondiale. Il fut développé pour équiper les divisions blindées de la Wehrmacht d'un char de combat lourdement blindé et lourdement armé pour accompagner les chars moyens Panzer III et Panzer IV qui étaient les plus répandus mais qui n’étaient plus en mesure de combattre efficacement les chars adversaires. L'armement principal était constitué du célèbre et létal canon antichar longue portée KwK 36 L / 56 de 88 mm. Installé dans la tourelle et protégé par un lourd bouclier de 120 mm, il était capable de perforer, même à une longue distance, le blindage de n’importe quel engin ennemi de l'époque. Il a été déployé sur tous les principaux théâtres d'opérations et a participé activement aux opérations militaires allemandes en Normandie et sur le front occidental. Bien que conditionné par des problèmes de fiabilité et d’emploi, le char lourd, aux mains d'équipages expérimentés, a toujours été extrêmement redouté par les forces alliées. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Chevrolet 15 CWT
510000233€30.99
The Italeri Chevrolet 15 CWT is a 1:35 scale plastic kit that captures the compact proportions and working character of a Commonwealth military truck. The finished subject combines a boxy cab, rugged running gear and a covered or open rear transport body, giving the build a strong period silhouette suited to historical vehicle collections. The kit is designed as a detailed assembly project and is marked 14 Years+. Sprue layouts shown in the set include separate chassis parts, body panels, cargo-bed components, clear parts and wheel elements, so the build develops through distinct structural stages rather than a single-piece shell. The subject is based on the Chevrolet 15 CWT, a four-wheel-drive vehicle used in military logistics and towing roles during World War II. A driver figure is not included. Paint guidance in the set references colours such as Flat Black, Flat Field Drab, Gloss Silver, Sand, Dark Green, Flat Rust and Rubber Black, supporting finishes that match the chosen scheme. The new decal sheet allows 3 historical versions: a Canadian Army vehicle in Normandy, July 1944, a British Army vehicle in Southern Italy, summer 1944, and an Australian Army vehicle at El Alamein, November 1942. Assembly kit contents are included. Assembly is required, with a stated assembly time of 600 minutes. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 Conteneur militaire 20
510006516€21.99
The Italeri 1:35 20' Military Container model kit brings a standard military logistics element into scale scenes with a completed length of 17.4 cm, corrugated wall panels and detailed end-door hardware that gives the container a convincing industrial look. One end door can be shown opened, adding visible access to the interior and giving loading bays, transport yards and support areas a more active layout. This assembly kit is based on a 100% new mould and centers on the structure of a real 20-foot freight container, a format used across ship, rail and truck transport because its standardized dimensions support intermodal handling. The model translates that familiar full-size form into 1:35 scale for military dioramas and vehicle displays. Decals for 3 versions provide specific marking paths for U.S. Army, U.S. Marine Corps and Italian Air Force finishes, including ownership markings, serial codes and load data panels. Assembly time is listed as 600 minutes. Paints, cement and tools are required separately. Placed beside military vehicles, stacked in a depot scene or used as a standalone cargo detail, the container adds context that connects transport, storage and ground support activity. The open-door option also suits loading or maintenance setups where the interior needs to remain visible during display.
Maquettes chars
1:35 Dodge WC62 1,5to 6x6 Truck
510096230€26.99
The Italeri Dodge WC62 1:35 6x6 Truck Model Kit recreates a military transport vehicle introduced in 1943 for United States Army service. As a detailed scale build, it captures the long wheelbase layout, the extra rear axle, and the unmistakable profile of the 1.5-ton truck in a format suited to careful assembly, painting, and display. The original Dodge WC62 was developed to carry equipment or up to 12 fully equipped soldiers, and that heavy-duty role shapes the model's character throughout. Its 6-wheel-drive configuration, sturdy chassis, and leaf-spring suspension define the mechanical layout, while the open cab with fold-down windshield adds a field-use detail that changes the whole look of the vehicle. The full-size truck used a 92 HP Dodge inline 6-cylinder engine, a key part of the design behind its broad wartime use across difficult terrain and changing operational conditions. On the bench, these features give the build a strong historical identity and plenty of scope for military finishes, convoy scenes, and World War II dioramas. The 1:35 scale works well alongside other vehicles, figures, and scenery in the same scale, allowing the completed Dodge WC62 to take its place in a wider period setting. 14 Years marks the recommended age for this model kit. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Dt. Sd.Kfz.138 Marder III Ausf. H
510006566€31.99
Italeri presents the 1:35 Dt. Sd.Kfz.138 Marder III Ausf. H as a detailed plastic model kit built around one of the most recognizable German tank destroyer layouts of the Second World War. The open fighting compartment, the slanted gun shield and the long 75 mm anti-tank gun give the finished vehicle a striking profile that stands out in a military collection or diorama scene. The full-size Marder III was developed on the chassis of the Panzerkampfwagen 38(t), and this kit captures that distinctive arrangement with the engine placed at the rear and the weapon system in the middle of the vehicle. The model uses link-and-length tracks, allowing the track run to follow the wheels and sprockets with a more defined shape than a single-piece band. Detailed sprues include hull panels, running gear parts, tools, gun components and crew figures, giving the build plenty of surface detail to work through. Decals for 4 versions add further finishing options with different markings and tactical identities. During the build, the model moves from the lower hull and running gear to the superstructure, gun installation and exterior fittings, creating a focused project over the stated 600-minute assembly time. Once painted and marked, the Marder III Ausf. H suits shelf display, historical vehicle collections and diorama settings that highlight its low silhouette, long barrel and open combat compartment. Assembly kit included. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 G7117 1,5t 4x4 Wrecker/Tow Truck
550035490€51.99
MiniArt G7117 1:35 Wrecker Tow Truck Model Kit brings a WWII-era recovery vehicle into a focused scale build with injection-molded parts, photo-etched details and clear components. At 1:35 scale, the G7117 1.5t 4x4 Wrecker captures the look of a military tow truck built for depot, roadside and field recovery scenes, with a finished model length of 207 mm. The build goes beyond the outer bodywork with a highly detailed engine compartment plus transmission, brake and steering systems, giving the model substance beneath the panels as well as on the surface. A truck tent cover with realistic fabric folds adds a distinct rear-body profile and strengthens the period look of the vehicle. The kit also contains 4 figures, which expand the display possibilities around maintenance, towing or recovery setups. Decals support 3 marking options, allowing the completed truck to be finished in different service identities drawn from the same vehicle type. Open or closed door and hood positions make it possible to stage the model in different ways, from a parked support truck to a maintenance scene with the inner structure on view. On a shelf, in a diorama or alongside other 1:35 military vehicles, the G7117 Wrecker brings mechanical detail, historical character and a clear recovery role to the scene. 14 Years+ Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Ger. Chasseur de chars I
510006577€31.99
Panzerjager I in 1:35 scale brings one of the earliest German tank destroyers into a detailed model kit with a finished length of 12.6 cm. The design is based on the Panzer I chassis and pairs that compact hull with a 47 mm anti-tank gun mounted behind an open steel shield, creating a distinctive profile on the workbench and in the display case. The kit is built around historically specific features that define the vehicle's character. The Panzer I hull gave the original machine good mobility, and that layout translates here into a tracked build with visible running gear, road wheels and a tall fighting compartment. Glueable rubber tracks shape the lower section with a more natural look, while the photo-etched fret adds finer detail where thinner metal parts matter most. Decals cover 4 versions, opening different marking and theatre options drawn from wartime service in France, North Africa and the 1941 Barbarossa campaign. One figure is included to add scale presence beside the vehicle. This Italeri model kit suits builders who enjoy military subjects with strong historical identity and varied finishing possibilities. The combination of compact dimensions, open-top gun platform and alternate markings gives the completed Panzerjager I a focused display presence, whether placed as a standalone build or worked into a small battlefield scene.
Maquettes chars
1:35 Ger. Sd.Kfz.140 Flakpanzer 38 Gep.
510096461€36.99
Le canon automoteur antiaérien Sd. Kfz. 140 Flakpanzer 38 "Gepard" fut développé pendant la Seconde Guerre mondiale sur le châssis du char léger tchécoslovaque Panzer 38(t). Son objectif était de fournir à la Wehrmacht un outil efficace pour protéger les unités blindées et les colonnes en mouvement contre les attaques aériennes.La fiabilité mécanique et la maniabilité offertes par le châssis du 38(t) constituaient la base technique sur laquelle était monté un canon antiaérien Flak 38 de 20 mm, installé sur une plateforme rotative blindée pour protéger l’équipage. L’arme principale fut également utilisée contre des positions fixes et en soutien des troupes au sol lors de combats rapprochés. Progressivement, le Flakpanzer 38 fut complété dans son rôle antiaérien par d’autres véhicules automoteurs dotés d’une puissance de feu supérieure, tels que le Wirbelwind et l'Ostwind. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Ger. Sd.Kfz.167 Sturmgeschütz IV
510000223€30.99
Référence article: 510000223 Produit: 1:35 GER. Sd.Kfz.167 Sturmgeschütz IV Le Sturmgeschütz IV a été construit sur le châssis du char moyen Panzer IV pour fournir, dans les phases avancées de la Seconde Guerre mondiale, à l'armée allemande un canon d'assaut capable d'être efficace également en tant que chasseur de chars. Le Stug IV était armé d'un canon Stuk40 de 75 mm L/48 à haute vélocité initiale installé dans une casemate, protégé par un mantelet blindé, capable de perforer les blindages des principaux véhicules blindés ennemis. Distribué aux unités dans les premiers mois de 1944, il a complété et souvent remplacé le canon d'assaut Stug III qui avait subi en 1943 une baisse soudaine de la production en raison des raids de bombardiers alliés de plus en plus fréquents sur les zones industrielles allemandes. Largement déployé sur le front de l'Est, le Stug IV a également été utilisé par les unités blindées et les détachements antichars de la Wehrmacht en Normandie, où, grâce à son faible profil, il s'est avéré particulièrement difficile à identifier dans les haies de la campagne française. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Ger. Sd.Kfz.234/1 (2cm)
510006757€36.99
Les automitrailleuses de la série Schwerer Panzerspähwagen Sd.Kfz. 234 furent produites par l'industrie de guerre allemande durant la phase finale de la Seconde Guerre mondiale. Elles se distinguaient par un niveau élevé de qualité de fabrication, alliant mobilité, flexibilité opérationnelle et capacité offensive. Le projet représentait un excellent compromis entre vitesse sur tout type de terrain, protection et puissance de feu, incarnant la synthèse de l’expérience opérationnelle acquise par la Wehrmacht au cours des premières années du conflit. Elles pouvaient atteindre une vitesse maximale de 85 km/h sur route. Parmi les différentes variantes produites, le Sd.Kfz. 234/1 jouait fréquemment le rôle de véhicule de commandement. Également utilisé pour des missions de reconnaissance avancée, il était équipé d’un canon de 20 mm KwK 30 monté sur une tourelle ouverte, capable de fournir un appui-feu à l’infanterie contre des cibles faiblement blindées. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 Ger. Sitting Tank Crew
550053022€14.79
MiniArt Ger. Sitting Tank Crew brings 4 seated military figures into 1:35 scale, giving armoured vehicle builds and WWII dioramas a crew group sized to match common display formats. The plastic model kit format keeps the focus on assembly, finishing and painting, while the seated poses suit placement on or around tanks and other military scenes. Each figure is supplied as part of an assembly kit, with resin heads that add a distinct material contrast for facial detail and helmet definition during the painting stage. The set also contains weapons, allowing the finished figures to carry field equipment that supports a more complete historical presentation. With 4 figures in the box, the composition can be arranged as a grouped crew scene, split across different positions, or combined with an existing vehicle build. The stated assembly time is 600 minutes, which fits a longer modelling project with time for cleanup, fitting and painted finishing. On a shelf, in a display case or as part of a larger battlefield layout, the 1:35 scale makes the set easy to pair with military armour subjects in the same ratio. The seated and resting poses help create scenes that feel occupied and active, whether the figures are placed on hull surfaces, near stowage areas or beside a completed tank. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Ger. Tiger Bergetiger Sup. Vehicle
510006764€33.49
Italeri Bergetiger brings a rare armored recovery subject into 1:35 scale with a detailed plastic kit based on the modified Tiger I support vehicle. The model centers on the distinctive battlefield conversion in which the original tank lost its main gun and took on a crane for technical and logistical work around front-line armored units. The historical reference behind this version gives the build a very specific identity. Allied forces used the name Bergetiger for captured examples, following the same naming pattern seen on recovery vehicles derived from Panther and Panzer IV tanks. Contemporary accounts describe a machine that kept the Tiger I hull, tracks, and heavy armor while adding equipment intended for towing disabled tanks, lifting heavy components, carrying spare parts, and supporting repairs on other armored vehicles. No official production statistics are known, and the type is generally believed to have been assembled in small numbers by Wehrmacht field workshops at the front. That background gives the finished model a strong presence in military dioramas, workshop scenes, and vehicle lineups focused on support and recovery roles rather than direct combat. The 14 years age marking fits a build that rewards careful handling of a less common World War II vehicle subject and adds a distinctive variant to a 1:35 armor collection.
Maquettes chars
1:35 HEMTT Gun Truck
510106510€41.99
The Italeri 1:35 HEMTT Gun Truck model kit brings the heavy military transport platform into a build focused on armour, scale presence and field conversion detail. With a finished length of 28.0 cm, the truck's long 8-wheel layout gives the completed subject a commanding footprint that suits both shelf display and convoy diorama scenes. The HEMTT name stands for Heavy Expanded Mobility Tactical Truck, a vehicle range introduced for the United States Army from the mid-1980s. This version reflects the gun truck conversions developed for escort and convoy protection duties, with added defensive structures around the cab and rear section. The kit is described with fully upgraded moulds, supporting cleaner definition across the body panels and helping painted details stand out once the build is complete. Decals for 1 version add operational markings that reinforce the technical, service-used appearance of the truck. The assembly kit is recommended for ages 14+ and has a stated assembly time of 600 minutes. Figures are not included. On the workbench, the combination of large structural sections and smaller finishing details creates a measured, step-by-step build. Once completed, the HEMTT Gun Truck fits naturally into modern military collections, desert vehicle displays and scenes built around transport, escort or protected movement roles.
Maquettes chars
1:35 HMMWV M966 TOW Carrier
510006598€24.99
Référence article: 510006598 Produit: 1:35 HMMWV M966 TOW Carrier Le véhicule à roues développé pour l'armée américaine HMMWV, acronyme de High Mobility Multipurpose Wheeled Vehicle, et plus connu sous le nom de « Humvee », constitue l'évolution technologique du « savoir-faire » américain en matière de construction de véhicules tout-terrain extrêmement flexibles dont le « Willys » est encore aujourd'hui l'icône. Le véhicule « Humvee » est entré en production dans les années 1980 et se caractérise par sa grande taille et sa flexibilité opérationnelle grâce à ses quatre roues motrices et à sa construction robuste en mesure de résister à un environnement et à des conditions d'utilisation difficiles. Plusieurs versions ont été produites et utilisées pour le transport de troupes, la logistique militaire, la reconnaissance avancée et l'acquisition de cibles. La version M966 Tow Carrier était équipée d'un système de missiles Tow monté sur le toit du véhicule afin d'augmenter le potentiel offensif de l’Humvee contre les véhicules blindés.
Maquettes chars
1:35 Howitzer M1 155mm avec équipage
510006581€28.49
The Italeri M1 155mm Howitzer with crew brings a key U.S. artillery piece into 1:35 scale with a finished model length of 20.9 cm and a full 6-figure gun crew. The combination of the howitzer, carriage and personnel gives the build a clear battlefield context, with the finished scene suited to a display base, a larger military diorama or a stand-alone artillery subject. This plastic kit represents the M1 155/23 howitzer first produced in 1942 as a medium artillery piece for the U.S. Army. The original gun could fire different ammunition types and had a maximum range of 14,600 meters, details that place the model firmly within mid-20th-century artillery development. The subject also offers a longer service story than a single wartime snapshot, as the M1 remained in use after World War II during the Korean War and the Vietnam War before replacement by the M198. That service span makes the kit relevant for several historical display settings and paint-finish approaches. During assembly, the model can be built in transport configuration or firing configuration, allowing different presentation angles for the split trail carriage and deployed gun position. Once painted and arranged with the 6 figures, the scene can suggest loading, positioning or gun-crew coordination on a field base. Model cement, tools and paints are required separately.
Maquettes chars
1:35 IT WW2 PzKpfw.VI Tiger I Ausf.E mP.
510006507€39.99
The Italeri Tiger I Ausf.E mP. in 1:35 scale brings the mid production heavy tank into a focused model-building project with a finished length of 24.1 cm and a layout shaped by period-specific equipment. The assembly kit recreates a vehicle from the second half of 1943, combining the earlier hull basis with the newer turret design, increased protection, and an improved commander's cupola. This version is set up for a more detailed build through upgraded moulds, while parts for 2 variants allow different configuration choices during assembly. Some of the represented vehicles retained the Feifel dust filter system and smoke grenade launchers, and the kit also reflects the magnetic mine paste applied from August 1943 on German Army tanks. The included photo-etched fret adds sharper scale detail to selected components, and the link by link tracks create a more segmented, mechanical track run than a single-piece alternative. Decals for 4 versions extend the finishing options with different markings once painting is complete. The 600 minute assembly time gives the build room for careful work across the hull, turret, running gear, and exterior details. On a shelf, desk, or in a military model collection, the completed Tiger I stands out through its long gun barrel, interleaved road wheel layout, and mid production configuration. Figure not included.
Maquettes chars
1:35 Jagdpanzer 38(t) Hetzer
510096531€34.49
The Italeri Jagdpanzer 38(t) Hetzer model kit brings a compact World War II tank destroyer into 1:35 scale, combining the vehicle's low silhouette with the visual impact of a closed casemate and a forward-mounted 7.5 cm gun. That combination gives the finished build the tense, purposeful look that made the original Hetzer so hard to spot when camouflaged in the field. Its design traces back to the proven mechanical basis of the Panzerkampfwagen 38(t), a foundation chosen for reliable production and efficient manufacture in the second half of 1943. The original vehicle entered service in the second half of 1944, where its low profile, frontal armor and concentrated firepower made it a highly effective tank destroyer. In model form, those same characteristics create a subject defined by tight proportions, angled armor surfaces and a compact fighting compartment. The detailed plastic kit format keeps the focus on the Hetzer's distinctive structure rather than on oversized dimensions or decorative extras. During assembly, the 1:35 scale layout invites close attention to the relationship between hull, casemate and gun, making the vehicle's design logic easy to read in three dimensions. Once completed, the model fits naturally into military collections, dioramas or display shelves where compact armored vehicles and late-war German subjects take center stage. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Kfz. 69 Schwimmwagen
510000313€12.99
The Italeri 1:35 Kfz. 69 Schwimmwagen model kit brings an amphibious military vehicle into a compact display scale with a subject rooted in World War II transport and reconnaissance history. At 10.9 cm when built, the model captures the distinctive proportions of the Schwimmwagen, a design developed by Ferdinand Porsche after the success of the Volkswagen 82 Kubelwagen. The full-size vehicle was created for terrain and mission profiles that demanded more than a standard car could manage. Its light weight of about 1/2 ton helped it keep moving through muddy ground, and its amphibious layout answered the need to cross water during reconnaissance and liaison missions. That background gives the finished 1:35 build a clear technical identity, with the boat-like lower body and compact military form setting it apart from standard wheeled vehicle subjects. The kit also includes 3 figures, opening up more options for staging the completed scene beyond the vehicle alone. On the workbench, the 600-minute assembly time points to a build with room for careful painting, fitting and finishing. Decals for 1 version provide the markings for a defined final appearance, whether the model stands alone in a cabinet or becomes the centrepiece of a small historical diorama.
Maquettes chars
1:35 KPz Leopard 1A5 WA
510006481€34.99
Le char d’assaut Leopard 1, entré en service autour de la moitié des années 60, a représenté la clé de voûte des cuirassés de l'Allemagne fédérale et de différentes forces armées et est né pendant la période de la « Guerre froide ». Le rôle du Leopard était essentiel, car il avait pour tâche d'affronter les immenses masses de chars d'assaut éventuellement déployés par les armées du Pacte de Varsovie. Il était armé du canon testé L7 de 105 mm, pouvant utiliser différents types de munitions. La version A5 est une nette amélioration avec l'adoption d'une tourelle modifiée capable d'accueillir les nouveaux systèmes informatisés d'identification des cibles et de conduite de tir. Un blindage supplémentaire en polycarbonate composite a également été adopté, augmentant considérablement la protection et la résistance aux coups.
Maquettes chars
1:35 Lance-roquettes 15cm 42 sur SWS
510006562€31.99
Italeri 15cm Panzerwerfer 42 auf SWS Kit brings a World War II half-track rocket launcher into 1:35 scale with a detailed plastic assembly project and a finished model length of 198 mm. The combination of the Schwerer Wehrmachtschlepper chassis and the elevated 15 cm launcher gives the build a strong mechanical profile, from the front wheel and armored cab to the rear track units and launch platform. The original vehicle was developed from the SWS as a medium half-track used for supply transport and light artillery towing, then adapted for other battlefield roles on its rear load area. In this version, the rear section carries a 10 barreled 15 cm Nebelwerfer 42 mounted above an armored ammunition storage compartment, which sets this subject apart from standard transport variants. The plastic kit format gives close attention to the contrast between the sloped armor, the open running gear layout and the compact launcher assembly. A new decal sheet adds technical markings, crosses, registration numbers and version-specific details for 2 finishing options. Across the workbench, the 600 minute assembly time supports a more involved build with room for careful painting, marking placement and subassembly work. Once completed, the 198 mm model fits naturally into a 1:35 military collection, whether placed alongside other half-tracks, artillery subjects or late-war armored vehicles.
Maquettes chars
1:35 Land Rover 109 "Guardia Civil
510006542€21.49
The Land Rover 109 "Guardia Civil" model kit in 1:35 scale brings the long wheel base Series III into a compact 12.5 cm display format, combining classic off-road proportions with the distinctive markings of a Spanish service vehicle. Upgraded moulds give the body and exterior details a cleaner base for painting, fitting and final finishing. This assembly kit draws on a vehicle known for its 4x4 traction system and aluminium body, features that shaped the Land Rover's role across demanding terrain and varied duties. The "Guardia Civil" version adds a specific historical setting, while the 3 decal options open different registration and marking layouts for the finished replica. The subject reflects the broad use of the Land Rover 109 in military and civilian service and connects the build to the Series III era introduced in 1971. Assembly is required, and the stated build time is 600 minutes. On the workbench, the 1:35 format suits careful painting sessions, detail work and measured decal application across doors, plates and insignia. Once completed, the model carries the upright stance, long body shape and utility character that made the Land Rover 109 a lasting reference point in off-road vehicle history.
Maquettes bateaux militaires
1:35 LCM 3 (Landing craft mechanized)
510006755€51.99
Référence article: 510006755 Produit: 1:35 LCM 3 (Landing craft mechanized) Les Landing Craft Mechanized (LCM) sont probablement les engins de débarquement les plus célèbres de l'histoire, leur profil étant étroitement lié aux opérations amphibies des Alliés pendant la Seconde Guerre mondiale, d'Anzio aux plages de Normandie. La version LCM-3 est certainement parmi les plus réussies et efficacement utilisées. La conception était simple et linéaire mais extrêmement rationnelle. La grande rampe de chargement avant permettait le débarquement rapide d'une équipe d'infanterie entièrement armée ainsi que d'un char moyen Sherman de 30 tonnes. L'armure était très légère, protégeant le moteur diesel, ce qui permettait à l'LCM d'atteindre une vitesse maximale de 8 nœuds, et l'équipage nécessaire pour la navigation et la défense rapprochée, composé de quatre hommes. Cependant, sa capacité de chargement et sa flexibilité opérationnelle étaient significatives, permettant à l'LCM-3 de se tailler une place importante dans l'histoire militaire du XXe siècle. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes bateaux militaires
1:35 LCVP avec infanterie américaine
510006524€62.99
Italeri LCVP with US Infantry brings a landmark amphibious landing craft into 1:35 scale with the massed presence that defines a beach assault scene. The 31.4 cm hull gives the build a broad footprint for troop placement, while the LCVP form developed by Higgins Industries is paired here with U.S. Infantry figures for a focused D-Day Series subject. The full-size LCVP was designed to shuttle between larger ships and the shore, carrying personnel, light vehicles and supplies during amphibious operations in Europe and the Pacific. That role gives this model kit a clear working identity, with the open central bay, high side walls and loading layout all tied to transport duty rather than a conventional naval silhouette. The set also draws on the craft's long service history, as the LCVP remained in use after the Second World War and later saw action in Korea and Indochina. New soldier moulds add fresh tooling to the infantry contingent, and the decal sheet expands finishing options with markings for 8 versions. On the bench, the combination of landing craft and infantry supports a range of display directions, from a tightly packed embarkation scene to a shoreline approach with crew and troops distributed across the deck. The 600 minute assembly time suits a build that can be painted, marked and staged as a detailed military diorama centerpiece.
Maquettes chars
1:35 Leopard 2A4
510006559€34.99
The Italeri Leopard 2A4 brings one of the most widely fielded modern main battle tanks into 1:35 scale, combining a 27.6 cm finished length with the low, angular profile that gives this vehicle its unmistakable presence on the shelf. As a detailed assembly kit, it turns the Leopard 2A4 into a hands-on build centered on hull structure, turret form, running gear and final finishing work. The subject reflects a tank family introduced between the late 1970s and early 1980s to replace the Leopard 1 in German service. Italeri bases this version on the Leopard 2A4, noted in the source material for its advanced fire-control system and updated protection layout. The main armament represented on the model is the 120 mm Rheinmetall L/55 smoothbore gun, a defining feature of the vehicle's silhouette. The kit also provides a super decals sheet for 5 versions, opening several marking paths across different operators. Figures are not included. Assembly kit contents are supplied for builders aged 14 years and over. At the workbench, the build suits careful painting, decal placement and detail-focused finishing, especially across the turret sides, hull panels and track assemblies. New gluable rubber tracks support the final look of the running gear, while the color instruction sheet helps guide camouflage and marking placement for the selected version. Assembly time is indicated as 600 minutes.
Maquettes chars
1:35 LVT-4 Wasserbüffel
510006752€36.99
Les véhicules chenillés L.V.T. (acronyme de Landing Vehicle Tracked) ont été développés pour équiper les forces armées américaines, l'armée et le corps des Marines, d'un engin adapté aux opérations amphibies capable d'offrir un bon niveau de protection. Souvent connus sous le nom de "Amtrac", ils ont été largement utilisés dans le théâtre d'opérations du Pacifique, contre les forces japonaises, mais aussi au cours de la dernière année de guerre sur le théâtre européen. L'LVT-4 constituait, en particulier, une nette amélioration par rapport aux versions précédentes. Avec la redéfinition du projet, le moteur a été déplacé en position centrale, libérant ainsi l'arrière du véhicule pour l'adoption d'une rampe permettant de charger et décharger rapidement des véhicules légers ou des pièces d'artillerie de petit calibre à l'appui des troupes de débarquement. Ce fut la version la plus réussie avec le plus grand nombre de véhicules produits. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 M-113 APC
510006753€29.49
L'M113 peut être considéré comme l'un des APC (Armoured Personnel Carrier) les plus célèbres de l'histoire. Il a été développé à la fin des années 1950 et au début des années 1960 dans le but précis de transporter une escouade d'infanterie entièrement armée et équipée avec un bon niveau de protection aussi près que possible de la zone d'opérations. En plus du transport tactique de l'escouade d'infanterie, l'M113 pouvait offrir un soutien rapproché aux troupes grâce aux armes embarquées, qui, dans les premières versions, se limitaient à une mitrailleuse Browning M2 de 12,7 mm. Utilisé pour la première fois au Vietnam, il est devenu l'un des véhicules blindés les plus répandus dans le monde, avec plus de 80 000 exemplaires produits. Fiable et robuste, avec de bonnes performances sur tous types de terrains, il a été utilisé, dans ses différentes variantes, par de nombreuses forces armées. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 M-47 Patton
510006763€30.99
Le char moyen M-47 Patton a été développé et déployé auprès des unités blindées américaines dans la première moitié des années 1950. Par rapport à ses prédécesseurs, comme le M-46, il offrait des performances nettement supérieures, avec une meilleure protection et une puissance de feu accrue, assurée par le canon M3 de 90 mm monté sur la tourelle. Le char pesait environ 46 tonnes en ordre de combat et était équipé d'un puissant moteur Continental V12 refroidi par air, développant 810 chevaux, ce qui lui permettait d’atteindre une vitesse de 45 km/h. En plus des États-Unis, il a été utilisé par de nombreuses armées de l’OTAN pendant la guerre froide. Fiable et robuste, il a servi pendant de nombreuses années au sein des unités blindées de plusieurs armées européennes jusqu’aux années 1980. Il a également été engagé dans divers conflits, du Moyen-Orient à la guerre indo-pakistanaise. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes bateaux militaires
1:35 M.A.S. 568 4a Torpedoboat avec équipage
510005626€114.99
Italeri M.A.S. 568 4a Torpedoboot 1:35 Kit captures the lean profile of an Italian motor torpedo boat in a format that gives the hull, deck fittings and crew real presence on the bench and in a finished display. The 1:35 scale gives the compact naval craft enough size for the cabin structure, railings and deck areas to read clearly once assembled. This assembly kit is based on the M.A.S. 500 class, the fast gasoline-engine boats used during the Second World War as motor torpedo craft and anti-submarine platforms for depth charge dropping. The source subject is described with a top speed of 40 knots and armament of 2 450 mm torpedoes, giving the model a strong historical identity rooted in small, rapid naval warfare. Decal options shown for M.A.S. 563 classe 500 3a Serie and M.A.S. 568 classe 500 4a Serie add alternate finishing routes within the same class. The included crew helps turn the finished boat into a more complete scene rather than a standalone vessel. With 600 minutes stated for assembly, the build suits model makers who enjoy taking time over painting, markings and deck detail. Paints, cement and tools are required separately. Once completed, the boat fits naturally into a naval collection, a maritime diorama or a shelf display that focuses on fast patrol and torpedo craft from the Second World War.
Maquettes chars
1:35 M110 Self Propelled Howitzer (pistolet à propulsion autonome)
510006574€31.99
The Italeri M110 Self Propelled Howitzer brings a major U.S. Army artillery vehicle into 1:35 scale with a finished length of 25.8 cm and the long, elevated profile that defines the M110 A1. As a detailed assembly kit, it focuses on the tracked chassis, open gun platform and 203 mm M201 gun that gave the full-size vehicle its long-range field role. The M-110 series entered service in the 1960s, and the 1977 updates to the M-110 A1 improved operational efficiency while retaining the reliable chassis shared with the M-107. That historical basis gives the build a clear technical identity, from the rear spade arrangement used during firing positions to the broad tracked layout associated with self-propelled artillery. New gluable rubber tracks add flexibility during construction, while the decal sheet supports 4 different marking versions drawn from U.S. Army service. Figures are not included. Paints, cement and tools are required separately. On the bench, the combination of assembly, painting and decal placement creates a model with strong military presence, whether finished in a clean service look or with added weathering. The 600-minute assembly time suits a project built over several sessions, with each stage adding more definition to the gun mount, hull details and running gear.
Maquettes chars
1:35 M1A1 Abrams War Thunder
510035108€37.99
Le char d’assaut de troisième génération M1 Abrams constitue l'épine dorsale des divisions blindées de l'armée Américaine et du Corps des Marines. L'Abrams se caractérise par son blindage lourd (il compte parmi les véhicules de combat les plus lourds au monde) et l'adoption du puissant moteur à turbine multi-carburant. Une grande attention a été portée à la protection de l'équipage grâce au dépôt de munitions séparé et fortement protégé. Le M1 Abrams, qui est entré en service opérationnel au début des années 80 pour remplacer les anciens M-60, offre un système sophistiqué de conduite de tir et un blindage moderne. D'abord armé d'un canon de 105 mm, il a ensuite été équipé du canon de 120 mm le plus moderne et le plus puissant avec un tube lisse capable d'utiliser une variété différente de projectiles. L'Abrams a été largement utilisé, avec une efficacité létale, sur tous les grands théâtres opérationnels, du Moyen-Orient à l'Afghanistan, s'avérant être supérieur à tout autre char adverse. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 M24 Chaffee
510006761€30.99
Le char M24 Chaffee a été distribué aux unités de l'armée américaine à partir de 1944 pour fournir sur le champ de bataille un char léger capable de remplacer l'ancien M3/M5 Stuart. La configuration du M-24 était en effet très différente de celle de son prédécesseur, et son design s'est avéré extrêmement efficace, au point qu'il peut être considéré comme l'un des meilleurs chars légers jamais construits. Agile, robuste et fiable, il était, pour un "Light Tank", bien armé, étant équipé d'un canon M6 de 75 mm avec 48 obus à disposition. L'armement du char était complété par deux mitrailleuses Browning de 12,7 mm. Il a également été utilisé avec succès dans des missions de soutien rapproché à l'infanterie et pour effectuer des tâches de reconnaissance avancée. Au cours du conflit, une coopération efficace a été développée entre les unités de M-24 et des véhicules blindés plus lourdement armés, comme le Sherman dans ses différentes versions. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 M4A1 Sherman avec l'infanterie américaine
510006568€37.99
Italeri M4A1 Sherman with U.S. Infantry is a 1:35 scale plastic model kit that brings one of the most widely used U.S. medium tanks of World War II into a detailed build with added diorama character. The finished tank measures 167 mm in length, and the set pairs the Sherman with 10 infantry figures to create a fuller scene around the vehicle rather than a stand-alone armour display. The M4A1 version is defined here by the rounded lines of its fully cast upper hull and the rounded turret form, details that give this variant its distinct silhouette. The kit also features glueable T54E1 tracks, adding a specific running gear pattern to the build. A decal sheet covers 3 finishing versions, with markings such as stars, serial numbers, tactical symbols and vehicle names visible across the supplied options. Assembly time is stated as 600 minutes. Glue and paints are required separately. On the bench, the combination of tank and figures opens up several display directions, from a vehicle halted in an urban setting to a moving column with troops riding on the hull and turret. The 1:35 scale also works well for builders who enjoy painting uniforms, equipment, cast armour textures and period markings with close visual control.
Maquettes chars
1:35 M4A2 U.S. Panzer Marine Corps
510006583€35.99
Référence article: 510006583 Article: 1:35 M4A2 U.S. Panzer Marine Corps Taille du modèle 16,8 cm NOUVELLES CHENILLES COLLABLES T54E1 - DÉCALQUES POUR 4 VERSIONS - FEUILLE D'INSTRUCTIONS COULEUR Le char moyen M4 Sherman était le char principal utilisé par les États-Unis pendant la Seconde Guerre mondiale. Il a été produit dans un nombre important d’unités et a formé l’épine dorsale des forces blindées des États-Unis à cette époque. Il a été produit en plusieurs variantes et versions. La première version produite à grande échelle était le Sherman M4A1 caractérisé par les bords arrondis de la coque supérieure entièrement coulée. Même la tourelle avait un aspect arrondi. Cependant, la force la plus importante du char était son projet. Le Sherman était fiable, bon marché et facile à produire en grand nombre. La version M4A2 était similaire à la précédente mais elle était à moteur diesel avec le moteur General Motors Twin G-41. Au début, le M4A2 était destiné à soutenir les activités de guerre des nations alliées comme l’Union soviétique et la Grande-Bretagne, mais de nombreux chars étaient utilisés par le Corps des Marines des États-Unis. Activement utilisés dans les batailles pour la reconquête des archipels de l’océan Pacifique, ils ont joué un rôle fondamental dans la destruction des puissantes fortifications construites par l’armée japonaise.
Maquettes chars
1:35 M4A3E8 Sherman "Fury" (Fureur)
510006529€41.99
The M4A3E8 Sherman Fury in 1:35 scale brings one of the best-known late-war U.S. tank variants into a detailed assembly kit with a finished model length of 16.8 cm. Its Easy Eight configuration gives the build a distinct profile, combining the 76 mm M1 high velocity gun with the later suspension layout seen on this version. Production of the M4A3E8 started at the end of 1944, and this kit reflects the technical updates that set it apart within the Sherman family. The horizontal volute spring suspension, known as HVSS, was introduced to improve driving conditions and support higher speed on the full-size vehicle, adding a recognisable engineering feature to the miniature. Newly upgraded moulds help define the hull and turret surfaces with crisp structure for painting and finishing work. Decals for 3 U.S. versions expand the marking options, while the included T66 and T84E1 tracks give 2 distinct running gear choices. The new glueable rubber material can also be painted, which supports a more integrated finish across the lower hull and track sections. On the workbench, the combination of alternate tracks, historical markings and late-war Sherman details creates a build with clear choices at each stage. Assembly is required and takes about 600 minutes. Paints, glue and tools are required separately.
Maquettes chars
1:35 M6 Dodge Anti-Tank
510106555€20.99
The Italeri M6 Dodge Anti-Tank brings the Gun Motor Carriage M6 into 1:35 scale as a detailed assembly kit with a finished model length of 12.9 cm. Built on the Dodge WC52 4x4 frame and fitted with a rear-mounted 37 mm light anti-tank gun, it captures the distinct proportions of a fast, lightly armed World War II support vehicle. The subject draws on a vehicle used by the United States Army from late 1942 through the end of World War II across the Mediterranean, the European front and the Pacific. Its Dodge T-214 6-cylinder engine gave the full-size vehicle a road speed of 90 km/h, shaping the character of a mobile gun carriage rather than a heavy tank destroyer. The kit also includes 1 figure, adding a crew presence that can strengthen a static display or a wider wartime scene. A color instruction sheet supports the build process, and decals provide markings for 4 versions. On a shelf, in a desert campaign setting or as part of a broader Allied vehicle collection, the M6 Dodge Anti-Tank suits builders who want a compact military subject with clear historical identity. Assembly is required, with a stated build time of 600 minutes.
Maquettes chars
1:35 M923 Hillbilly Gun Truck
510006513€31.99
The Italeri M923 Hillbilly Gun Truck model kit in 1:35 scale brings a modern U.S. logistical vehicle into a focused build with a finished length of 24.8 cm. Its subject is the M923 A-1, a 5 ton cargo truck that entered service in the early 1980s and became known for its large off-road tyres and adaptable platform. In this Hillbilly Gun Truck configuration, the base transport is reworked with field-style protective structures that give the silhouette a tougher, mission-specific character. The kit is built around upgraded moulds and an assembly layout that covers the long chassis rails, multi-axle running gear, cab interior, cargo body sections and gun truck conversion details. The parts map shows separate sprues for structural sections, wheel components and smaller fittings, plus a thin cable for added detailing. Alternative door-frame and side-pipe configurations allow the build to follow different assembly choices shown in the instructions. Decals for 1 version support the finishing stage with vehicle-specific markings. With 600 minutes of assembly time, this kit suits model builders who enjoy a longer project with visible progress across chassis, cab and rear body construction. The completed truck has the presence to stand out in a military vehicle line-up, whether placed in a convoy scene, a field workshop setting or alongside other 1:35 scale transport subjects. Minimum age: 14 years
Figurines militaires et accessoires
1:35 Mât télégraphique
510000404€9.49
Italeri Telegraph Poles brings 1:35 scale infrastructure into a diorama with the distinctive look of period line routes, turning open ground, roadside stretches and rail-adjacent scenes into settings with more structure and direction. The assembly kit focuses on telegraph pole forms with crossarms, insulators and overhead wire runs that read clearly in military, transport or rural layouts. Different pole configurations shown for the set support more than a single visual rhythm, so a scene can shift between simpler line posts and a larger multi-crossarm arrangement. That variation helps break up repeated spacing and gives longer scenic sections a more natural flow. The insulator groupings and side-mounted fittings add the small technical cues that make utility infrastructure look believable at model scale. With an assembly time of 600 minutes, the build centres on careful placement and alignment rather than quick decoration, which suits detailed groundwork and structured scenic planning. The included component is an assembly kit. Placed along a road, beside a track section or across a field edge, the finished poles help guide the eye through the layout and connect separate scenic zones. In a historical street scene or transport setting, overhead lines can define distance, mark routes and add height without crowding the ground-level composition. 14 Years+ is stated as the minimum age.
Maquettes chars
1:35 Mod. US M978 Fuel Service Truck
510006554€48.99
The Italeri M978 Fuel Service Truck captures the HEMTT fuel-servicing variant as a detailed 1:35 scale assembly kit with a finished length of 29.7 cm. Its 8-wheel-drive military tanker layout, angular cab and cylindrical tank body give the model the unmistakable profile of a heavy logistics vehicle built for demanding terrain. The subject represents the M978 version developed for fuel transport duties, with the full-size vehicle carrying over 9,500 liters in its tank. That role gives the build a distinct identity within military transport subjects, separating it from cargo or equipment carriers in the same HEMTT family. The kit uses upgraded moulds and comes with a color instruction sheet to support the painting stages with clearer visual guidance. New rims and rubber tyres refine the running gear, while the decal sheet adds service labels, hazard warnings, JP-8 markings, tie-down points and other technical stencils that bring the tanker body to life. Decals for 2 versions allow different finishing choices within the same vehicle type. Across the workbench, the combination of large structural parts and smaller service details creates a build with clear visual progress from chassis and cab to tank and markings. With 600 minutes assembly time and a 14 years recommendation, the kit suits focused painting sessions, careful decal placement and a finished display that carries the operational character of a U.S. Army fuel truck used in Iraq and Afghanistan.