Systèmes de commande RC

Servos RC

1:10 KO RSx4S-one10X, servo, low profile

€124.99

The KO RSx4S-one10X is a 1:10 low-profile servo shaped for compact RC chassis where installation height and steering packaging need careful control. Its metal gear layout and the stated 11.8 V specification place it firmly in performance-focused electronics setups, giving model-building enthusiasts a concrete steering component for advanced builds. The low-profile housing suits layouts where body clearance, linkage position and surrounding electronics leave little spare room. In that context, the 0.10-second speed figure supports fast steering response when direction changes need to happen with little delay. The servo format also makes it relevant for 1:10 on-road and competition-style configurations that rely on tidy component placement rather than oversized hardware. As an electronic control component, it belongs in a build where the steering system, power supply and chassis geometry are chosen as a matched package. On the bench, the compact form helps when planning a clean electronics layout around the steering area. Once installed in a compatible 1:10 model, the combination of low-profile dimensions, metal gears and high-voltage operation supports focused tuning for precise handling response.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Récepteurs RC et accessoires

2.4GHz KR-242XT Receiver, 4-channel radio unit

€74.99

The KR-242XT is a compact 2.4GHz 4-channel receiver made for hobby-grade RC installations where clean electronics packaging and dependable channel allocation matter. Its short-format design suits model layouts with limited installation space, while the 4-channel configuration leaves room for more than the core driving functions in compatible radio-controlled builds. Within an RC setup, the receiver acts as the link between transmitter commands and the vehicle's onboard electronics, making channel management a central part of the build. The KR-242XT is positioned for enthusiasts who work with detailed model configurations and need a receiver that fits neatly into tighter chassis sections. The 2.4GHz specification places it in the current standard for modern radio control systems, and the compact housing supports tidy cable runs around surrounding components. With an age marking of 14 Years, it sits clearly in the hobby segment rather than entry-level toy use. This format suits workshop upgrades, replacement installations, and fresh RC builds where the electronics package needs to stay compact. In a carefully planned chassis layout, a short receiver can make the difference between a crowded interior and a cleaner, more accessible arrangement.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio system into a 4-channel transmitter built for fast, exact control on the track. High resolution signal processing and a redesigned electronic layout work together for a notably direct steering response, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. The set includes the KR-242XT receiver with long antenna for telemetry use. Its menu structure goes far beyond basic trim changes. Steering functions cover servo travel limit, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, auto-start, idle-up, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. A display, conversion calculator, VR information, sound settings and adjustable menu speed keep setup work clear at the bench between runs. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V, or a LiPo rechargeable battery 2S 7.4 V are required separately.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 2.4 GHz transmitter built for fast, exact control. Its redesigned electronics deliver a highly direct steering feel and, in XT Advanced Mode, transmission speed up to 3 times faster than the EX RR. The included KR-242XT receiver with short antenna completes the core setup for telemetry use. A 4-channel PWM or serial layout gives the system a broad technical base for competition-focused RC driving. Steering functions include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim or balance and servo reverse. Throttle and brake adjustment extends further with 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way switching, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The transmitter measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving a substantial handheld format for longer sessions at the track. Timer functions include lap history, trigger start, lap navigation and alarm mode for structured race practice. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately. Age 14+  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

EX-NEXT BASIC LDT, transmitter, 4-channel 2.4 GHz

€439.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 4-channel transmitter built for fast, exact control. High resolution signal processing and the redesigned electronics work together for a notably direct steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. In the hand, the 240.5 x 163.0 x 107.2 mm format and 551 g weight create a substantial control unit for focused driving sessions. Its menu depth goes well beyond basic steering and throttle adjustment. Steering settings include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake functions add 3-stage forward and reverse speed, acceleration, push control, auto-start, idle-up, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way functions, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. Telemetry features cover RF mode, pairing, Real-Time ICS and battery failsafe, while timer functions include lap history, trigger start, alarm mode and lap navigation for track-focused running. The set comes with 2 KR-242XT receivers with short antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V or a LiPo rechargeable battery 2S 7.4 V are required separately.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

EX-NEXT BASIC RC transmitter, 4-channel 2.4 GHz

€399.99

The EX-NEXT BASIC RC transmitter brings KO Propo control hardware into a focused 4-channel 2.4 GHz format built for fast, accurate driving. XT radio technology and newly developed electronics work together for highly precise response, with XT Advanced Mode reaching up to 3 times the transmission speed of the EX RR. The result is a notably smooth steering feel and direct control input that suits racing, competition and high-performance RC models. Its setup depth goes well beyond basic trim functions. Steering adjustment covers servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake tuning add 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, brake-in, hand brake and override. Timer functions include lap history, trigger start, lap navigation and alarm mode, while system tools add display settings, menu speed, battery information and a conversion calculator. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the unit a substantial hand-held format for track sessions and bench setup alike. The set includes 1 KR-242XT receiver with long antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery 6.6 V or a 2S LiPo rechargeable battery 7.4 V are required separately.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

EX-NEXT Basic, transmitter set, 4-channel 2.4 GHz

€439.99

Fast response and fine control define the EX-NEXT Basic transmitter set for ambitious RC driving. The 4-channel 2.4 GHz system uses the XT radio standard and combines the EX NEXT master unit with LCD, Xpansion Unit 2 EXP 201, Extension Unit 2.1 Basic and Grip Unit 2 Basic in one configured setup. The electronics platform supports XT Telemetry as the factory RF mode and reaches up to 3x the transmission speed of the EX RR in XT Advanced Mode. Real-Time ICS, pairing functions, battery failsafe and a wide system menu expand the setup range beyond basic driving adjustments. The transmitter measures 240.5 x 163.0 x 107.2 mm, weighs 551 g excluding batteries and has a power consumption of 200 mA. Timer functions include trigger start, lap history, lap navigation, alarm mode and start stop control, adding useful race-day data handling alongside the driving setup. Compatible receivers are listed as KR 420XT and KR 242XT, and this version comes with 2 KR-242XT short antenna receivers. Power is supplied separately via 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery at 6.6 V or a 2S LiPo rechargeable battery at 7.4 V. The broad menu structure suits competition sessions, multi-car pit setups and detailed tuning work on performance-focused RC models.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

EX-NEXT BASIC, transmitter, 4-channel 2.4 GHz

€419.99

The EX-NEXT BASIC transmitter brings KO Propo control technology into a focused 4-channel 2.4 GHz format built for precise RC driving. XT radio standard and high-resolution signal processing work together for very fast response and a notably smooth steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. On the bench or at the track, that combination supports direct inputs and clean corrections through technical sections. Its control architecture goes well beyond basic steering and throttle adjustment. Steering functions include servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, push control, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3-8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the transmitter a substantial hand feel for longer sessions. Model selection, model copy, model reset and 50 memory slots support fleets with different setups, while the timer menu adds start timer, trigger start, lap button and lap navigation for repeatable practice runs. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes

FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz

€119.99

The FS 14K Reflex Stick Pro 4 brings a 14-channel layout, 2.4GHz transmission and a modern ergonomic RC housing into one control system shaped for complex model functions. Its carbon-look surface and illuminated logo give the transmitter a technical, workshop-ready appearance when powered on. The channel structure is designed for detailed function control. Four channels work continuously and fully proportionally for direct response through the control sticks, while channels 7, 8, 9, 10, 13 and 14 are assigned to 3-position toggle switches. Channels 5, 6, 11 and 12 operate through 3-position push buttons with centre position, creating a clear split between proportional inputs and switched functions. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply allows up to 11 V without BEC. A 15-channel receiver is listed in the included contents. For setup work, channels 1 to 4 feature servo reverse and trim, and channels 1 and 4 add dual rate for servo travel adjustment. This makes the system suitable for models that need tailored steering, throttle or auxiliary function behaviour. 100% compatibility is stated for TAMIYA MFC 01, MFC 02, MFC 03 and DMD units, which suits truck and function-model layouts with multiple switching tasks. 14 Years is stated as the recommended age.

Radiocommandes

FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz

€149.99

The FS 14K Reflex Stick Pro 4 LCD 2.4GHz brings broad channel control and fine setup options into one radio system built for demanding RC models. With 14 channels, an LCD layout and a 15-channel receiver in the set, it supports complex functions that go beyond basic steering and throttle, while the carbon-look finish and illuminated logo give the transmitter a distinctive technical appearance. Channels 7, 8, 9, 10, 13 and 14 use 3-position toggle switches, while channels 5, 6, 11 and 12 use 3-position push buttons with centre position. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply can reach up to 11 V without BEC. A Graupner J/R connector system is used for integration, and the radio is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as DMD units. The set includes the 14-channel LCD remote control, a 15-channel receiver and a manual. For truck, construction and function models with multiple switching tasks, the channel layout supports lighting, sound and auxiliary functions from one handset. The 14 Years marking fits advanced RC use, where stored model setups and detailed channel assignment matter during regular driving and system changes.

Radiocommandes

FS 6K Reflex Stick 4 Pro 2.4GHz

€99.99

The FS 6K Reflex Stick Pro 4 2.4GHz brings 6-channel radio control into a layout built for detailed model setups and precise handling. Four continuously adjustable, fully proportional channels work alongside a 3-position push button on channel 5 and a 3-position toggle switch on channel 6, giving a clear control structure for driving functions and switched features. The integrated failsafe system adds an important control function for model operation. Trim for channels 1-4 supports exact correction directly at the transmitter, while dual rate for channels 1-2 adjusts servo travel for a more tailored response. The control sticks use precise, smooth mechanics, and the housing combines an ergonomic shape with a carbon-look surface and an illuminated logo when powered on. The transmitter operates at 4.8-6 V with 4 AA cells, the receiver power supply reaches up to 11 V without BEC, and the connector system uses Graupner J/R. Compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units expands the range of suitable model applications. On the bench, the channel layout supports careful setup of steering, throttle and auxiliary functions before a model heads out. During driving sessions, the separate switching options and proportional control help keep inputs clean and deliberate across different model configurations.

Radiocommandes

FS 6K Reflex Stick 4 Pro LCD 2.4GHz

€109.99

The FS 6K Reflex Stick Pro brings 2.4GHz radio control, a 6-channel layout and an LCD interface into one focused setup for model driving with a clear, technical feel in hand. Smooth control sticks, an ergonomic housing and a carbon-look surface shape a transmitter that suits longer sessions at the workbench and on the track alike. Channels 1 to 4 are continuously adjustable and fully proportional, while channel 6 is assigned to a 3-position toggle switch and channel 5 to a 3-position push button with centre position. The transmitter stores 15 model memories, making it easier to keep separate configurations ready for different vehicles. For channels 1 to 4, servo reverse changes direction of movement, trim corrects neutral position, dual rate adjusts servo travel, EPA limits servo travel and EXP changes response characteristics around centre input. The receiver power supply can reach up to 11 V without BEC, and the system is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as the DMD unit. A 6-channel receiver and manual are included. 4 AA cells are required separately for the 4.8 to 6 V transmitter operating voltage. With a minimum age marking of 14 years, this radio set fits hobby-focused RC setups where multiple channel functions, stored profiles and detailed response adjustment matter during driving and setup.

Radiocommandes RC

FS Reflex Wheel XS 2.4G Émetteur seul

€25.99

L'émetteur RA 2Ch Reflex Wheel XS 2.4GHz 500500117 de Carson est une radiocommande compacte à 2 canaux pour les modèles XS, qui fournit une liaison 2,4 GHz stable et un contrôle précis. Quatre piles AA sont nécessaires pour le fonctionnement (non incluses) ; l'émetteur est compatible avec les récepteurs et convient aux modèles XS 500404252, 500404253, 500404254 et 500404255.

Récepteurs RC et accessoires

KO 4CH Receiver KR-242XT 2.4GHz

€74.99

The KR-242XT 2.4GHz receiver brings a compact 4-channel control unit into RC model setups where clean signal transmission and dependable channel allocation matter. With 4 channels available, the receiver supports core driving functions such as steering and throttle while leaving room for additional switching tasks in more detailed electronics layouts. Its KO 4CH Receiver KR-242XT 2.4GHz designation places it clearly as a dedicated radio component rather than a general accessory, which helps when planning a compatible control system around separate onboard electronics. The 2.4GHz frequency is the standard basis for modern RC operation, suited to model installations that need stable wireless communication in a compact format. The data states that batteries are not included. Minimum age 14 years is specified for this receiver. An EU declaration of conformity is provided for the unit, with cited standards including EN 301 489-1 V2.2.3, EN 301 489-3 V2.3.2, EN 300 440 V2.2.1, EN 55014-1:2021, EN 55014-2:2021 and EN 62479:2010. This receiver fits naturally into hobby workbench sessions focused on configuring RC electronics and refining a vehicle's control layout. It also suits replacement or upgrade use in model projects where a 4-channel 2.4GHz unit is the required basis for the radio system.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

KO BSx4S-one10 Grasper2, Models Supplies

€174.99

KO BSx4S-one10 Grasper2 appears in the supplied conformity data as an electronic component within models supplies, carrying the exact designation KO BSx4S-one10 Grasper2 LP/MG/12,1/0,11. That precise naming helps place it within a hobby setup where exact component matching matters. The available data is technical rather than promotional, so the description stays close to what is verifiable. The component is listed under Models & Accessories and Models Supplies, with a 14 Years age marking in the source data. Battery inclusion is stated as false, which means no battery is named as part of the included contents here. The documentation also records an EU declaration of conformity issued under the manufacturer's responsibility, with references to 2014/30/EU, 2011/65/EU and 1907/2006. Harmonised standards EN55014-1:2021 and EN55014-2:2021 are named in that declaration. For model-building enthusiasts, this kind of exact designation supports careful parts selection when maintaining, replacing or specifying electronics in a compatible RC build. The source data does not provide further functional specifications, dimensions or included accessories, so the focus remains on the documented identity and compliance references of the component.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

KO BSx4S-one10 Grasper2, servo, one10

€184.99

The KO BSx4S-one10 Grasper2 brings a focused servo setup to one10 RC builds, combining a 0.12-second transit speed with a 33 torque rating for direct control input in running and tuning sessions. Its STD and MG specification places it in the standard-size class with metal gear construction, a combination that fits the practical demands of hobby-grade model sport use. Within an RC chassis, the servo is the link between radio command and mechanical movement, and that role makes speed and consistency central to the driving feel. This unit is intended for model applications where steering accuracy or throttle actuation needs a compact, dedicated control component rather than a generic replacement. The 4S designation in the name identifies the series variant, while the one10 reference ties the servo to the widely used 1:10 model class. Batteries are not included. In workshop use, the servo suits fresh assemblies, drivetrain updates and targeted replacements where a standard-format control unit is needed. On the track or during car park running, it supports clean directional changes and controlled input transfer through the steering or throttle linkage, giving hobby builds a clearly defined electronic control element.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

KO ICS-USB Adapter HS Servo/ESC Software

€34.99

The KO ICS-USB Adapter HS Servo/ESC Software adds a direct computer link for supported model electronics setup. Built for use with KO HS servo and ESC software, it connects compatible components to a PC-based software environment where settings can be adjusted with more precision than through on-model controls alone. This accessory belongs in the model workshop where electronic behaviour is tuned to match the chassis, surface and driving style. Servo response, ESC parameters and related software-based adjustments can be handled through the adapter when used with supported systems. Its USB connection makes it a practical bridge between model electronics and screen-based setup work, keeping repeated changes organised during testing or maintenance. Batteries are not included. On the bench before a run, the adapter supports structured setup sessions for supported servo and ESC combinations. It also fits ongoing maintenance work when electronics need reconfiguration after component changes, helping hobbyists return to a known setup with less guesswork.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Récepteurs RC et accessoires

KO KR-420XT 2.4GHz, receiver, 4-channel

€119.99

The KO KR-420XT 2.4GHz receiver brings a focused electronics component into RC model setups with 4-channel control and a compact format suited to tight installation spaces. In a vehicle build where every millimetre matters, this short receiver layout helps keep the radio system neatly arranged while maintaining the core link between transmitter input and onboard response. As a dedicated receiver, the KR-420XT sits at the centre of signal transfer inside the model and supports the coordination of steering, throttle and further switched or proportional functions across 4 channels. The 2.4GHz specification points to modern radio operation within compatible systems, while the clearly stated KO KR-420XT designation helps when planning replacements, system updates or workshop organisation. This is a component-led choice for hobby benches that rely on exact matching rather than generic electronics swaps. Installed in an RC vehicle, the receiver becomes the quiet control hub behind each driving command, from first system setup to regular running sessions. The 14 years age marking is stated for this hobby component, fitting model-building environments where radio equipment is selected and integrated as part of a broader technical setup.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

KO MC-8 TR Set m.Xpansion Keys MFC02/03

€119.99

KO PROPO MC-8 TR Set (500501041) réunit l'émetteur MC-8 avec le clavier Xpansion et le récepteur MR-8 en un système à 8 canaux de 2,4 GHz de style gamer : 4 canaux proportionnels, 2 canaux tactiles et 2 canaux de commutation. Boîtier ergonomique, affectation des manches configurable, émetteur 6,0 V (4×AAA), récepteur 3,0-7,4 V, FUT/UNI, fabriqué au Japon. Livré avec : MC-8, MR-8, mode d'emploi.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

KO Neo Advantage Capacitor+, ESC accessory

€35.99

The KO Neo Advantage Capacitor+ for BL ESC is an RC electronics accessory aimed at hobby-grade model setups, with a clear focus on brushless ESC applications. Its compact add-on role suits enthusiasts who fine-tune existing vehicles and control systems rather than starting with a complete ready-to-run package. Placed in the Models & Accessories and Models Supplies range, this component belongs to the technical side of RC building, where each part is chosen for a specific task in the drivetrain or control layout. The supplied compliance record identifies the KO Neo Advantage Capacitor+ for BL ESC by name and documents EU declaration of conformity references to 2014/30/EU, 2011/65/EU and 1907/2006. Harmonised standards EN55014-1:2021 and EN55014-2:2021 are also listed in that record. Batteries are not included. In practical workshop use, this kind of accessory fits into upgrade, maintenance and replacement routines around brushless speed controller installations. It suits RC benches, pit boxes and parts collections where dedicated electronics components are selected to match an existing model setup. The age marking is 14 Years.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

KO PDS-2503 SLP, servo, 7.4 V response unit

€43.99

The KO PDS-2503 SLP is a response servo built for RC model setups that call for quick, direct control signals. With a stated response speed of 0.12 at 7.4 V, it brings a technical specification that matters when steering input or throttle actuation needs to register with minimal delay in a 14 Years hobby environment. As a dedicated servo unit, it belongs at the heart of the control system, translating radio commands into mechanical movement inside the model. That makes it a relevant choice for enthusiasts refining handling characteristics, replacing a worn control component, or planning a fresh electronics layout around a defined voltage figure. The supplied data also confirms that batteries are not included, so any wider power setup remains dependent on the surrounding RC installation rather than on this single component alone. In workshop use, the KO PDS-2503 SLP fits projects where response speed and voltage compatibility are key selection points before the first run. It also suits upgrade work on existing RC models, where a clearly specified servo can help shape a more exact control feel during setup and driving sessions.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

KO PDS-2513 SLP/MG/9,6/0,13 Resp. Servo

€62.99

The KO PDS-2513 SLP/MG servo adds a defined control component to RC model setups, with a stated 9.6 V rating and a response speed of 0.13. In a chassis where steering or throttle inputs need a dedicated electronics unit, that combination gives model-building enthusiasts a clear technical basis for planning a replacement or a fresh installation. As part of the Models & Accessories range, this servo sits in the electronics side of an RC build rather than the body or drivetrain. The KO PDS-2513 SLP/MG designation helps identify the unit accurately when matching parts within an existing setup. The supplied product data also confirms an EU declaration of conformity for this servo, with references to 2014/30/EU, 2011/65/EU and 1907/2006, plus the harmonised standards EN55014-1:2021 and EN55014-2:2021. That gives the component a documented compliance basis alongside its stated electrical specification. On the bench, the servo fits naturally into repair work, electronics upgrades or a planned RC build that needs a named control unit rather than a generic placeholder. It also suits spare-parts storage where exact model identification matters before installation in a compatible RC system.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

KO PDS-2516 SLP/MG, Power Servo, RC servo

€62.99

The KO PDS-2516 SLP/MG Power Servo is an RC servo component aimed at model-building enthusiasts who want a clearly identified electronics part for a fresh build, a workshop replacement or a tuning project. Its designation combines the KO PDS-2516 SLP/MG name with the technical references 10.8 and 0.16, giving the servo a distinct place in parts searches and component matching. Within an RC setup, a servo converts control signals into mechanical movement, making it a central link between radio commands and the steering or throttle function of the model. That makes the exact designation especially relevant when an existing setup calls for a specific servo format rather than a generic substitute. The data also confirms that batteries are not included. An EU declaration of conformity is documented for this electronic component, with conformity references to 2014/30/EU, 2011/65/EU and 1907/2006, plus EN55014-1:2021 and EN55014-2:2021. This servo fits naturally into workshop benches, rebuild sessions and electronics upgrades where the right named component keeps a project moving without guesswork. For hobbyists comparing replacement parts, the KO PDS-2516 SLP/MG designation provides a concrete reference point when matching an RC model's installed control hardware.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

KO RSx4S-one10X, servo, low profile metal gear

€124.99

The KO RSx4S-one10X brings a low-profile servo layout and metal-gear construction into a compact steering component for RC model setups. With its stated 11.8 V specification and 0.10-second transit figure, it is positioned for fast, direct response in electronics packages that call for a space-saving servo format. Its low-profile housing suits chassis arrangements where vertical clearance is limited and a compact installation matters for the overall build. The metal gear train gives the steering mechanism a defined mechanical path from servo output to linkage, which supports consistent input transfer under repeated direction changes. The designation in the source data identifies this as a servo rather than a complete vehicle, so the focus stays on steering performance and integration into a compatible RC platform. No batteries are included. In use, this kind of component fits competition-oriented touring car and one10 model projects where quick steering correction and tidy packaging are part of the setup brief. It also suits rebuilds and electronics upgrades that call for a low-profile servo with a high-voltage specification and a fast stated response figure.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

KO RSx4S-Power H.C, servo, 1:8 RC model

€174.99

The KO RSx4S-Power H.C brings competition-focused servo hardware into 1:8 RC model setups with a stated 26.3 torque figure and 0.13 second speed. In the standard STD/MG format, it is aimed at hobbyists who tune steering response with the same care as chassis balance and drivetrain setup. Its specification points clearly toward demanding RC use: the 4S-ready design suits higher-performance electronics layouts, while the metal gear construction focuses on direct power transfer inside the servo case. The combination of speed and torque supports fast steering corrections through technical sections, tighter line placement in corners, and more consistent response when track grip changes. Because the data identifies this unit as a servo rather than a complete vehicle, it fits naturally into custom builds, race maintenance, and targeted replacement work where a defined control component is needed. Batteries are not included. On the bench, the KO RSx4S-Power H.C suits builders comparing servo characteristics for a 1:8 buggy, truggy, or other RC model in that scale class. At the track, the stated figures support setups where quick input transfer and firm steering authority shape how the model reacts lap after lap.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

KO Servo Model Selector, servo accessory

€18.59

The KO Servo Model Selector for 4S BS/RSx4S adds a dedicated control accessory to the electronics side of an RC setup, giving model-building enthusiasts a focused way to work with compatible servo configurations. Built around KO 4S BS and RSx4S compatibility, it fits naturally into bench preparation before a chassis heads to the track. Instead of changing hardware across different builds, this selector is made to support model-specific servo selection within the stated KO system. That makes it a useful addition when several RC models share the same electronics platform but call for different setup choices. The compact accessory role also keeps the emphasis on tuning and configuration rather than on major component swaps. Minimum age is 14 Years. Batteries are not included. On the workbench, the selector suits organised setup sessions where electronics are matched to a fresh build or adjusted between running days. It also fits trackside preparation, where a compatible servo system can be configured with a more deliberate, model-led approach before driving begins.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

KO Trigger Pad set

€10.59

The KO Trigger Pad set is a model accessory from the Carson Modelsport range, listed with the exact designation used in the product data. With an assembly time unit in minutes, a voltage unit in volt, a maximum speed unit in km/h and a maximum operating time unit in minutes present in the data structure, the available verified detail for this entry remains focused on the accessory name itself rather than on technical fitment or performance figures. That makes the strongest, most reliable description a precise one: KO Trigger Pad set identifies a specific spare or replacement component for model-related equipment, and it belongs in a parts selection built around exact naming. The data confirms that batteries are not included and gives an age marking of 14 Years. No further verified information is provided here on compatibility, dimensions, material composition, included quantity, or supported systems, so those points are left unstated rather than guessed. Within a hobby bench, workshop drawer or model maintenance setup, an exactly named accessory set helps keep existing equipment in service and supports targeted parts searches when a matching component is needed. The entry is therefore written around the confirmed designation and the clearly stated 14 Years age marking, without inventing fitment details that the data does not supply.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Récepteurs RC et accessoires

KR-420XT 2.4GHz, receiver, 4-channel unit

€119.99

The KR-420XT 2.4GHz receiver brings 4-channel control into RC model setups with a compact electronics unit built for organised signal handling. In a chassis, boat hull or other hobby installation, the receiver forms the link between transmitter commands and the connected control functions, keeping the layout focused on the essentials of steering, throttle and added channel tasks. As an RC electronics component rather than a ready-to-run vehicle, this unit suits projects where the radio system is chosen part by part. The 2.4GHz specification places it in the current standard for model control, while the 4-channel format opens room for more than the basic drive inputs alone. That can support switching functions, auxiliary movements or other channel-based actions when the wider setup is matched accordingly. The product data also states a minimum age of 14 years and confirms EU declaration of conformity documentation for the receiver. In practical use, the KR-420XT fits workshop builds, replacement installs and electronics upgrades where an existing RC model needs a compatible receiving unit. It also suits fresh hobby projects that start with the radio layout first and are then completed around the selected control system.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes

RA 3Ch Reflex Stick Pro 4 2.4GHz

€49.99

The RA 3Ch Reflex Stick Pro 4 brings 2.4GHz radio control together with a classic stick layout for model driving that calls for direct, proportional input. With 3 channels and 2 continuously adjustable, fully proportional control paths, steering and throttle commands can be metered with fine control, while channel 3 is switched in 2 positions for a clear auxiliary function. Channel 1 includes dual rate to adjust servo travel, which helps match the steering response to different model setups. Servo reverse changes the direction of movement for the channels when the installation requires it, and the trim function for channels 1-2 supports accurate neutral settings. The transmitter operates at 4.8-6 V with 4 AA cells, and the receiver power supply allows up to 11 V without BEC. The connector system uses Futaba/Graupner J/R, giving the set a clear interface for compatible RC components. The set includes the 3-channel remote control, a 4-channel receiver and a manual. An LED battery status indicator keeps the transmitter charge level in view during running sessions, while the failsafe system provides a defined response if the radio link is lost. Age 14 Years+  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes

RA 4Ch Reflex Stick Pro 4 2.4GHz LCD

€64.99

The RA 4Ch Reflex Stick Pro 4 2.4GHz LCD brings 4-channel control and detailed setup functions into one radio system for model driving from age 14 years. Its LCD layout supports direct access to key settings, while 15 model memory slots keep multiple vehicle configurations stored and ready for use. Two fully proportional channels allow continuously adjustable steering and throttle input, and 2 additional switch channels handle special functions on compatible models. Channels 1 and 2 can be tuned with servo reverse, trim, dual rate, EPA and EXP, giving clear control over direction, centre position, servo travel limits and response curve. The integrated failsafe system adds a concrete control safeguard for supported setups. The transmitter operates at 4.8 to 6 V with 4 AA cells, and the connector system uses Graupner J/R. A 4-channel receiver is included, so the system can move straight into installation on a suitable model. The receiver power supply supports up to 11 V without BEC, which suits a wide range of hobby configurations. This combination fits model-building enthusiasts who want one radio system for several vehicles, special functions and fine setup work at the bench or track.  Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

RC-Reflex Pro 3 Elektro Set boîte brune

Le kit électrique RC-Reflex Pro 3 (réf. 500707152) complète les modèles ARR et les modèles en kit pour voiture et bateau et s'adresse aux passionnés de modélisme. Il comprend un émetteur 2 canaux 2,4 GHz avec deux canaux entièrement proportionnels, trim, dual rate et fail-safe, un mini-récepteur 4 canaux, un chargeur expert (100-240 V pour NiMH), un accu de propulsion 7,2 V/3000 mAh (Tamiya), le servo de direction CS-6 (6 kg, engrenage métallique) ainsi que quatre accus d'émission 2100 mAh et des instructions.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Récepteurs RC et accessoires

Récepteur 15K Reflex Stick Pro 4 WP – 15 canaux, 2,4 GHz, étanche

€51.99

Élargissez les fonctionnalités de votre modèle RC haut de gamme grâce au récepteur Carson Reflex Stick Pro 4 WP à 15 canaux. Ce récepteur sophistiqué a été conçu pour garantir une transmission du signal extrêmement précise et totalement exempte d'interférences dans la bande de fréquence moderne de 2,4 GHz. Avec ses 15 canaux de fréquence distincts, ce module constitue la base idéale pour les modèles aux fonctionnalités complexes, tels que les camions RC ou les véhicules spécialisés, qui nécessitent le contrôle simultané de nombreuses fonctions supplémentaires. Malgré ses performances exceptionnelles, le boîtier séduit par ses dimensions compactes : 52 mm de longueur, 32 mm de largeur et seulement 13 mm de hauteur. Grâce à son poids plume de seulement 15 grammes, ce composant électronique s'intègre sans effort et de manière peu encombrante dans le châssis. En tant que récepteur de remplacement parfaitement adapté, le système s'harmonise parfaitement avec les émetteurs Carson FS 14K Reflex Stick Pro 4, la version LCD correspondante ainsi que la télécommande 15K LCD-MFC. Bénéficiez d'une portée maximale, d'une fiabilité optimale et d'une liaison radio stable pour votre modèle fonctionnel.

Récepteurs RC et accessoires

Récepteur 6K Reflex Stick Pro 4 WP – 6 canaux, 2,4 GHz, étanche

€42.99

Élargissez les possibilités de votre modèle réduit radiocommandé grâce au récepteur Carson Reflex Stick Pro 4 WP à 6 canaux. Ce récepteur performant a été spécialement conçu pour garantir une transmission du signal absolument fiable et sans interférences dans la bande de fréquence moderne de 2,4 GHz. Grâce à ses six canaux distincts, vous gardez à tout moment le contrôle total des fonctions supplémentaires complexes de votre véhicule ou de votre bateau. Son boîtier est extrêmement compact et ne mesure que 46 mm de longueur, 28 mm de largeur et 17 mm de hauteur. Avec un poids minimal de seulement 13 grammes, ce composant technique s’intègre sans effort et de manière peu encombrante dans pratiquement n’importe quel châssis, sans nuire au comportement routier. Conçu comme un récepteur de remplacement sur mesure, ce module s'harmonise parfaitement avec les télécommandes Carson FS 6K Reflex Stick Pro 4 et leur version LCD. Profitez d’une portée maximale, d’une précision optimale et d’une liaison radio stable à chaque sortie. Faites confiance à une technologie sans compromis pour votre modèle réduit télécommandé.

Servos RC

Servo CS-9 Waterproof MG/ 9kg / JR

€22.99

Le servo Carson CS-9 (500502042) est un servo standard résistant à l'eau pour les modélistes, qui mise sur une longue durée de vie avec son engrenage et ses paliers métalliques. Avec un couple de 98 Ncm à 6 V, un temps de réglage de 0,1 s/60° et une tension de service de 4,8-6 V, il apporte une direction puissante et précise aux modèles 1:10-1:8. Kit de corne de servo et prise JR inclus.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

Servo de direction XS CS-3,5 3,5kg

€14.99

Le servo de direction Carson XS CS-3,5 500502054 apporte une force de réglage de 3,5 kg et un raccordement à 5 pôles pour des tâches de commande précises. Le servo convient aux modèles XS 500404252, 500404253, 500404254 et 500404255 et est également compatible avec les modèles FE-Line. Les passionnés de modélisme bénéficient ainsi de pièces de rechange parfaitement adaptées.

Servos RC

Servo numérique CS-17 - 17kg/roulement à billes/JR

€34.99

500502052 Le servo numérique CS-17 de Carson est un servo standard puissant et rapide, résistant à l'eau, avec un axe sur roulement à billes et un engrenage métallique robuste pour une longue durée de vie. Il fournit un couple de 170 N-cm pour un temps de réglage de 0,19 s, fonctionne avec 4,8-6 V, mesure 40×20×38 mm, pèse 50 g, est idéal pour les modèles 1:10 et 1:8 et est livré avec un set de servo corne.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

Servo numérique CS-7 - 7kg/roulement à billes/JR

€29.99

500502050 Le servo numérique CS-7 de Carson est un servo numérique standard résistant à l'eau avec un couple de réglage puissant de 70 N/cm (≈7 kg-cm), monté sur roulements à billes et avec un engrenage métallique robuste. À 4,8-6 V, il atteint un temps de réglage de 0,17 s, mesure 40×20×38 mm et pèse 50 g. Kit de corne de servo inclus, idéal pour les modèles 1:10 et 1:8.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

Servomoteur numérique CS-10 - 10kg/roulement à billes/JR

€31.99

500502051 Le servo numérique CS-10 de Carson est un servo standard puissant, numérique et étanche, idéal comme servo de direction ou de réglage puissant pour les modèles 1:10 et 1:8. Le réducteur métallique à roulement à billes garantit une longue durée de vie ; 100 N-cm à 4,8-6 V et 0,17 s de temps de réglage fournissent un contrôle précis et rapide. Avec 40×20×38 mm, 50 g et un set de servocorne, il résiste aux utilisations humides en automne/hiver.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

UK REFLEX STICK PRO 3.1 ELEKTRO SET

€84.99

REFLEX STICK PRO 3.1 (500707132) Le kit électrique allie précision et facilité d'utilisation pour les débutants : radiocommande à 2 canaux 2,4 GHz avec deux canaux entièrement proportionnels, servo CS3, accu 7,2 V/2500 mAh, chargeur USB 250 mA et 4×AA piles. L'émetteur 4,8-6 V, l'inversion du servo, les fonctions de trim, le dual rate et la LED de l'état de l'accu en font un set complet prêt à l'emploi. Ne convient pas aux enfants de moins de 14 ans.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

FS 3K Reflex Wheel Pro 4 Electric-Set

€109.99

RA 3Ch R.Wh. Pro 4 2.4GHz Electric Set (500500112) fournit aux modélistes un ensemble complet de commandes comprenant un émetteur 3 voies, un mini-récepteur 4 voies, un servo CS6 de 6 kg avec réducteur métallique, un accu NiMH 7,2 V/3000 mAh et un chargeur. Les deux canaux réglables en continu, l'inversion du servo, le trim, le double taux, l'affichage LED de la batterie et le failsafe assurent un contrôle précis et fiable.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Récepteurs RC et accessoires

Récepteur Reflex Wheel PRO 3 2.4 GHz

€22.99

500501533 - le récepteur Reflex Wheel PRO 3 2,4 GHz de Carson rend ton émetteur flexible et s'adapte à de nombreux modèles de voitures et de bateaux grâce à ses dimensions compactes (env. 35x25x10 mm, ~10 g). Le récepteur 4 canaux avec failsafe fonctionne jusqu'à 11,1 V et est compatible avec Reflex Wheel Pro3, Reflex Wheel Pro3LCD ainsi que Reflex Stick 2 et Reflex Stick Multi.

Radiocommandes RC

FS 3K Reflex Wheel Pro 4 2.4GHz + 5Kg S.

Carson RA 3Ch Reflex Wheel Pro 4 2.4GHz + CS-5 (500500111) est une solution de radiocommande compacte pour les passionnés de modélisme : émetteur 3 voies 2,4GHz, nano-récepteur 4 voies et servo CS5 5 kg plus notice. Deux voies proportionnelles en continu, inversion du servo, trim, double taux, indicateur de batterie LED et failsafe offrent un maniement précis et sûr ; émetteur 3,6-4,5 V, récepteur jusqu'à 6 V, waterproof.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

Servo CS-3 - fiche 3 kg/JR

€11.99

Le servo CS-3 (500502015) est un servo standard à prix avantageux pour les passionnés de modélisme, livré avec un set de cornes de servo. Avec une force de réglage de 3 kg sur la prise JR, une tension de fonctionnement de 4,8-6 V, un couple de 31 Ncm, un temps de réglage de 0,17 s/60°, des dimensions de 38,5×19×32 mm et un poids de 39 g, il offre des performances fiables et compactes pour de nombreuses applications.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

FS 4K Reflex Wheel Pro 4 2.4GHz LCD

€59.99

La Carson RA 4Ch Reflex Wheel Pro 4 2.4GHz (500500119) est une radiocommande compacte à 4 voies pour les modélistes, qui combine deux voies entièrement proportionnelles et deux voies commutables. Le nano-récepteur (waterproof), le double débit, l'inversion du servo, le trim, le failsafe et l'affichage LED de la batterie assurent un contrôle précis. Tension de fonctionnement émetteur 3,6-4,5V ; récepteur 3,5-10V. Incl. émetteur, mini-récepteur, instructions.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Récepteurs RC et accessoires

Récepteur 4K Reflex Wheel Pro 4 WP – Récepteur RC, 2,4 GHz, 4 canaux

€29.99

Le récepteur Carson 4K Reflex Wheel Pro 4 WP est le complément idéal pour les passionnés de voitures RC exigeants et les modélistes chevronnés. Ce récepteur compact à 4 canaux utilise la technologie moderne de fréquence 2,4 GHz et garantit une transmission du signal ultraprécise et sans interférences pour des commandes de direction et de pilotage précises. Grâce à sa conception résistante à l'eau (WP), les composants électroniques sensibles restent parfaitement protégés, même lors de sorties sur sol humide ou en cas de légères projections d'eau. Avec ses dimensions minimales de 35 x 30 x 13 mm et son poids extrêmement faible de seulement 11 grammes, ce récepteur s'intègre sans effort et de manière peu encombrante dans les châssis les plus divers. La tension de fonctionnement flexible, comprise entre 4,8 V et 8,4 V, permet en outre une utilisation sans problème dans les systèmes de télécommande modernes et garantit des performances constantes dans la durée. Ce récepteur haut de gamme allie une fiabilité technique maximale, une installation simple et un plaisir de conduite durable sur tous les terrains.

Récepteurs RC et accessoires

récepteur Reflex Stick Multi Pro LCD 2.4

€54.99

Récepteur Carson 500501544 - Reflex Stick Multi PRO LCD, 14 voies, 2.4 GHz. Ce récepteur est conçu pour le Reflex Stick Multi PRO LCD et offre 14 canaux à 2.4 GHz pour le pilotage de modèles réduits. Spécialement adapté à l'installation Multi PRO LCD, il s'adresse aux passionnés de modélisme qui ont besoin de diversité de canaux.

Récepteurs RC et accessoires

Récepteur Reflex Wheel Start 2.4 Ghz

€19.99

Le récepteur Carson Reflex Wheel Start 2.4 GHz 500501543 allie une technologie compacte et des performances fiables pour les modélistes exigeants. Ce récepteur léger à 4 canaux avec télémétrie fonctionne à 4,8-8,4 V, mesure environ 35×30×13 mm et pèse environ 10 g. Idéal pour assurer une connexion stable et un contrôle précis.

Servos RC

Servo CS-13 - 13kg/Waterproof MG/JR

€25.99

Le servo Carson CS-13 (Réf. 500502025) est un servo MG waterproof puissant de taille standard. L'engrenage métallique et les roulements assurent une longue durée de vie. À 6 V, il fournit 135 Ncm et 0,12 s/60°. Avec une prise JR, un servo cornet, 41×20×38 mm et 49 g, il est idéal pour les modèles 1:10-1:8. La tension de fonctionnement de 4,8-6 V le rend flexible pour les modèles nécessitant un servo de direction ou de réglage puissant.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

FS 3K Reflex Wheel Pro 4 2,4GHz

€45.99

La Carson RA 3Ch Reflex Wheel Pro 4 2.4GHz (500500110) est une radiocommande ergonomique à 3 voies avec système 2,4 GHz, nano-récepteur et notice. Pour les fans de modélisme, elle offre deux voies proportionnelles continues, la voie 3 programmable, l'inversion du servo, les fonctions trim et dual rate, l'affichage LED des piles, la sécurité anti-fail, la roue directrice à roulement à billes et une tension de fonctionnement de 3,6-4,5 V. Ne convient pas aux enfants de moins de 14 ans.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes

Reciver Reflex Wheel Pro4 Gyro waterres

€32.99

Le Carson Receiver 4Ch Reflex Wheel Pro 4 Gyro WP 500501550 est un récepteur compact pour les passionnés de modélisme. Avec quatre canaux et des fonctions Reflex Wheel et 4 gyros en version WP, il offre un contrôle précis, une stabilité améliorée et une intégration facile dans les installations compatibles - idéal pour des performances contrôlées.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes

4K Reflex Wh.Pro 4 LCD inc.BL-Set+6kg S.

€134.99

Le RA 4Ch R.Wh. Pro 4 (réf. 500500121) est un système radio complet à 4 canaux pour les modélistes : émetteur 2,4 GHz avec écran LCD, nano-récepteur (waterproof), servo à engrenage métallique de 6 kg, kit brushless 3300 kV et instructions. L'émetteur offre deux voies entièrement proportionnelles, deux voies commutables, des fonctions trim, dual rate, expo/ABS, failsafe et 15 mémoires de modèle.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Récepteurs RC et accessoires

Boîte à piles

€3.79

Le boîtier de piles Carson 500503033 est le boîtier de piles compact à 4 compartiments pour l'alimentation en courant du récepteur des véhicules RC à moteur thermique. Il offre de la place pour quatre piles AA mignon et est livré avec un câble de raccordement. Les modélistes apprécient cette solution de remplacement compacte pour l'alimentation du récepteur lors de l'utilisation.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

Reflex Wheel Start 2.4G Radio noir

€34.99

500500102 Reflex Wheel Start 2.4G Radio noir est une radio 3 canaux polyvalente pour les débutants. Elle est livrée avec un émetteur 3 canaux, un mini-récepteur et un mode d'emploi. La commande peut être divisée en continu en deux canaux entièrement proportionnels et offre un trim gaz/direction, une inversion du servo, un double taux, un failsafe et un indicateur de batterie LED. Émetteur 4,8-6 V. Peut être combiné avec d'autres couleurs.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Récepteurs RC et accessoires

ReflexWheel PRO3 2.4GHz Recepteur BEC

€24.99

Le récepteur Carson Reflex Wheel Pro3 2,4 GHz (500501534) est un récepteur étanche à 4 canaux, idéal comme complément pour les modèles de voitures et de bateaux dans des conditions extérieures défavorables. Ses dimensions compactes, sa fonction fail-safe et son système de connecteurs unis (compatibles avec Futaba et Graupner/JR) garantissent un contrôle précis et fiable.

Servos RC

Servo CS-5 - connecteur 5 kg/JR

€14.99

Le servo CS-5 500502016 est un servo standard à prix avantageux avec une force de réglage de 5 kg et une prise Graupner J/R, pour toutes les applications en modélisme. Contenu de la livraison : servo avec kit de corne de servo. Caractéristiques techniques : Tension de service 4,8-6 V ; couple de réglage 50 Ncm ; temps de réglage 0,17 s/60° ; dimensions 38,5×19×32 mm ; poids 39 g.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Servos RC

Servo CS-6 - 6kg/Low-Prof./WP/MG/JR

€26.99

Carson Servo CS-6 Low-Profile 500502047 allie une forme compacte à un entraînement puissant : le servo étanche Low-Profile fournit un couple de réglage de 6 kg à 4,8-6 V, fonctionne rapidement et de manière fiable. L'engrenage métallique et la prise JR assurent la longévité ; avec un poids de 43 g et 40×20×19 mm, il s'adapte aux espaces restreints. Contenu de la livraison : servo avec fiche JR et set de cornes de servo.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Pièces détachées supplémentaire

Alu Servo Corne 27mm Carson/FUT 25Z

€7.29

500503051 - Corne de servo en aluminium 27mm Carson/FUT 25T/25Z : Ce bras de servo en aluminium a été développé pour les passionnés de modélisme et offre, avec une longueur de 27 mm exactement, une solution adaptée aux splines Carson/FUT 25. Il simplifie le remplacement et la mise à niveau des servos et assure une articulation précise ainsi qu'un montage sûr.

Radiocommandes RC

FS 4K Reflex Wheel Pro 4 2.4GHz LCD 2xRX

€69.99

La radiocommande Carson RA 4Ch R.Wh. Pro 4 2.4GHz LCD (500500113) est une radiocommande à 4 canaux pour les modélistes et est livrée avec deux mini-récepteurs à 4 canaux et des instructions. Deux voies entièrement proportionnelles, deux commutables ; inversion du servo, trim, double taux, 15 mémoires de modèle et nano-récepteur assurent un contrôle précis. Émetteur 3,6-4,5 V. Ne convient pas aux enfants de moins de 14 ans.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Radiocommandes RC

FS Reflex Stick Multi Pro LCD 2.4G 14-K.

€159.99

500501004 - FS Reflex Stick Multi Pro LCD 14Ch de Carson est un ensemble de radiocommande professionnel à 14 voies avec 15 mémoires de modèles, compatible avec TAMIYA MFC 01/03 et DMD, pour véhicules et bateaux RC. Deux manches, 10 interrupteurs (4 boutons, 4 niveaux, 2 potentiomètres rotatifs), 2.4 GHz FHSS, servo-reverse, LCD bleu, prise de charge ; émetteur, récepteur et manuel inclus. Fonctionne avec 4 piles AA (4,8-6 V).

Radiocommandes RC

Ko 8 canaux MC-8 MX-F TR Set 2

€104.99

The MC-8 2.4GHz MX-F TR set brings game-controller handling to an 8-channel RC radio system, combining the transmitter with the MR-8 micro receiver for compact installation in demanding model layouts. With the receiver measuring 27 x 28 x 15 mm, the set suits builds where available space matters as much as dependable multi-channel control. Its control layout goes beyond basic steering and throttle. The left and right 3D joysticks each include a push-button function, opening extra input options for assigned model functions. A Uni/Fut. connector system supports integration with compatible equipment, and the set is specified for use with TAMIYA MFC-01, MFC-02 and MFC-03 as well as DMD/MF units. The 2.4 GHz transmission standard supports modern radio operation for hobby models that need several functions managed from one handset. In workshop setups, scale trucks and function-rich RC builds can benefit from the extra channels for lighting, sound or special movements where the connected system supports them. 4 AAA batteries are required separately for operation, making the set ready to slot into existing hobby equipment with a straightforward power requirement.