Maquette plastique

Maquettes chars

1:72 Ambulance Sd.Kfz.305

bientôtà nouveau disponible

Article number: 510007055 Product: 1/72 Sd.Kfz.305 Ambulance Model Dim.: 8,2 cm Decals for 4 versions The Opel Blitz medium truck was used extensively by the German Army on all fronts during World War Two. Several thousand of them were produced. They were also used as platforms for antiaircraft weaponry and tanker, workshop and ambulance versions were made. Of sturdy construction and easy to maintain, it also featured good off-road performance which made it invaluable in both the Russian and African campaigns.

Maquettes chars

1:72 Char Kpfw. IV

bientôtà nouveau disponible

Article number: 510007007 Product: 1:72 Panzer Kpfw. IV Model Dim.: 8,5 cm Decals for one version The Panzer IV was developed in the first few months of the 2nd World War to provide the German armoured forces with a better protected vehicle carrying a 7.5 CM cannon. This was a reaction to the limits of its predecessor the model III with a 5 CM cannon compared to the threat of the enemys means, in particular the soviet T 34s which were equipped with an arm of that calibre as well as good armour plating. The model IV tank was extensively used on all fronts during the 2nd World War by the German Army. Many different gradually improved versions were produced to face the on-going improvements of the opponents means.

Figurines miniatures

1:72 Château fort avec troupes d'attaque

bientôtà nouveau disponible

Detailed Plastic Kit

Figurines miniatures

1:72 Château médiéval

bientôtà nouveau disponible

Detailed Plastic Kit

Maquettes avions militaires

1:72 F-104 G "Recce

bientôtà nouveau disponible

The model F-104 G Recce in 1/72 scale has a length of about 231 mm. Decals for 3 versions. The Lockheed F-104 Starfighter is one of the most famous fighters in the history of aviation and also one with the longest operational life: its history began at the end of the 50s and ended, for some air forces, in mid 2000s. Its unique airframe, with slender fuselage and very little wing surface, made this aircraft ideal as an interceptor. Thanks to the thrust of its General Electric J79-GE-11A afterburning turbojet engine, it could exceed Mach 2,2 with an excellent rate of climb. But it wasn't very maneuverable and difficult to pilot.The F-104G Starfighter was produced on license by several European aviation industries. From the mid 60s, it became the standard interceptor for many NATO countries including Italy, Germany, Holland, Greece, and Turkey. The armament was basically the same found on previous versions, with a 20mm Vulcan cannon and the option to fit under the wings air-to-air missiles, bombs, or additional fuel tanks to increase the airplane's range.With time, reconnaissance duties were added to the traditional interceptor service. The F-104G was therefore fitted with a dedicated "Orpheus" reconnaissance external pod that gave excellent operational results.

Maquettes avions militaires

1:72 F-15E Strike Eagle

disponible à partir de Juillet

Detailed plastic kit   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes avions militaires

1:72 F-4 C/D/J Phantom Aces

bientôtà nouveau disponible

Article number: 510101371 Product: 1:72 F-4 C/D/J Phantom Aces Model Dim.: 26,7 cm SUPER DECALS FOR 4 VERSIONS The four liveries refer to the following pilots : · Lieutenant-Colonel Jeffrey S.Feinstein · Colonel Charles Barbin « Chuck » DeBellevue · Brigadier General Richard Stephen « Steve » Ritchie · General Officer Robin Olds Detailed Plastic Kit of model F-4 C/D/J Phantom Aces (ASAF/US Navy/Vietnam Aces) in scale 1:72

Maquettes avions militaires

1:72 Fiat CR 32 Freccia

bientôtà nouveau disponible

Conçu par le célèbre ingénieur Rosatelli dans la première moitié des années 30, le Fiat CR 32 fonctionnait avec un moteur à 12 cylindres inversés en V de 600 ch. qui permettait d'atteindre 375 km/h. Parmi les biplans les plus connus de l'Histoire de l'Aviation, il se distinguait par son extraordinaire manœuvrabilité. Il était également robuste et bien armé pour la période historique grâce aux deux mitrailleuses Breda-Safat de 12,7 mm qui tiraient à travers le disque de l'hélice. Le FIAT CR 32 connut son baptême du feu avec l'Aviation Légionnaire, durant la Guerre Civile Espagnole et il prévalut immédiatement sur les monoplans de chasse de fabrication soviétique comme les Polikarpov I-16 qui équipaient les services de la l'Aviation Républicaine. Grâce à son extraordinaire manœuvrabilité et à la formation des pilotes italiens, le CR 32 prévalut aussi sur les avions dont la conception était la plus moderne et la plus actuelle. Rapide aussi pour ces années, le bombardier de fabrication soviétique Tupolev SB-2, choisi justement pour sa vitesse non interceptable, subit de nombreuses pertes durant les batailles aériennes avec les "Chirri" de l'Aviation Légionnaire.

Maquettes avions militaires

1:72 Fiat CR.42 Falco

bientôtà nouveau disponible

Référence article: 510001437 Article: 1:72 Fiat CR.42 Falco Taille du modèle 11,5 cm SUPER DECALQUES POUR 6 VERSIONS - FEUILLE D'INSTRUCTIONS COULEUR À partir du succès de C.R.32 "Freccia" prouvé par une grande fiabilité et efficacité opérationnelle pendant la guerre civile espagnole, le constructeur italien Fiat a développé, à la fin des années 30, le nouveau C.R.42 "Falco". Le nouveau chasseur biplace monoplace avait - comme son prédécesseur - le train d'atterrissage fixe et la cabine ouverte mais était équipé d'innovations importantes telles que le cadre en alliage et en acier recouvert de toile et de panneaux métalliques. Grace à son moteur radial Fiat A.74 suralimenté et refroidi par air, la Fiat C.R.42 a pu atteindre 400 Km / h. Il avait une maniabilité extraordinaire, très appréciée des pilotes italiens, mais souffrait des limites de configuration "biplan". Il a réussi à engager avec succès les Gloster Gladiators mais il a rapidement été surclassé par des monoplans plus rapides et lourdement armés comme le Hawker Hurricane et le Supermarine Spitfire. Plusieurs Fiat C.R.42, avec les chasseurs Fiat G 50 et les bombardiers BR-20 et CANT Z 1007, ils furent également utilisés pendant la Bataille d'Angleterre, encadrés dans l'Armée de l'Air Italienne.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes avions militaires

1:72 JAS 39 GRIPEN

bientôtà nouveau disponible

Article number: 510001306 Product: 1/72 JAS 39 GRIPEN The model JAS 39 GRIPEN in scale 1/72 has a length of about 200 mm. Decals for 4 versions. The JAS-39 is the new Swedish multi-role fighter presently being delivered to the Air Force. It is under serious consideration by former East-bloc countries, South American countries and others. The Gripen is one of the most recent European fighters. It is competing against the Rafale, the Eurofighter Typhoon and the American F-16s and F-18s of the most recent design. This quite elegant and extremely manoeuvrable aircraft is able to use a vast air-to-air missile arsenal as well as air-to-ground missiles in different roles: interceptor, attack fighter and navy interceptor.

Maquettes avions militaires

1:72 JUNKERS JU-52 3/m "TANTE JU" LH

bientôtà nouveau disponible

Référence article: 510100150 Article: 1:72 JUNKERS JU-52 3/m "TANTE JU" LH Taille du modèle: 26,2 cm SUPER DECALS SHEET Autocollants pour 4 versions Surnommé «Tante Ju» ou «Anne de fer», en raison de sa robustesse, le JU 52 a connu une lungue et glorieuse carrière en Allemagne à l’étranger. Avion de trasport standard de la Lufwaffe durant toute la Seconde Guerre Mondiale, il a considèrablement seve dans sa version hydravion et prèta un prècieux consours pendat la Campagne de Norvège et en Mèditerannée. Mais l’épisode le plus marquant de sa carrière en guerre est certainemento le débarquement aérien en Crète.

Maquettes chars

1:72 Kit de maquettes F-16 C/D Night Falcon

bientôtà nouveau disponible

Référence article: 510072009 Produit: 1:72 Model-Set F-16 C/D Night Falcon Le F-16 Fighting Falcon, produit par la société américaine General Dynamics à partir de la fin des années 70, est une véritable icône de l’aviation militaire. Au début, développé pour répondre aux besoins de l’U.S. Air Force d’avoir un avion de chasse monoplace diurne de supériorité aérienne, le projet a progressivement évolué et un avion de combat multi-rôle tous-temps a été créé, caractérisé par une flexibilité opérationnelle extraordinaire. Le F-16 se caractérise par un design original, facilement reconnaissable par le « canopy » (verrière) à bulle. qui garantit une grande visibilité au pilote. De plus, le F-16 adopta des solutions innovantes telles que la cloche latérale, le « fly-by-wire » et de modernes systèmes avioniques pour le vol et le combat. Apprécié par les pilotes pour sa grande manœuvrabilité et fiabilité, il est armé d’un canon M61 Vulcan de 20mm. Grâce à ses nombreux points d’attaque, il peut utiliser un arsenal offensif varié de missiles et de bombes. Le F-16 a été employé par de nombreuses forces aériennes du monde entier et il a effectué, souvent avec une grande efficacité, un nombre important de missions opérationnelles.

Maquettes chars

1:72 Le Sd. Kfz 250/3

bientôtà nouveau disponible

Référence article: 510007034 Produit: 1:72 Sd. Kfz 250/3 Le semi-chenillé Sd.Kfz. 250 a été largement utilisé par les troupes mécanisées allemandes pendant la Seconde Guerre mondiale. Développé sur la « disposition » technique du tracteur d'artillerie Sd.Kfz.10, il devait fournir une solution flexible et fiable pour intégrer les mouvements d'infanterie avec les troupes blindées. Le véhicule Sd.Kfz. 250 était armé d'une ou deux mitrailleuses MG34 de 7,92 mm et pouvait emporter, avec un bon niveau de protection, une escouade d'infanterie de 4 hommes sur le champ de bataille. L'appréciation du véhicule a été à la base du développement de nombreuses variantes dont la version 250/3 Leichter Funkpanzerwagen (véhicule blindé léger de liaison radio), utilisé comme centre névralgique de la liaison radio entre les troupes avancées, l'artillerie et l'armée de l'air. Le célèbre « Greif », utilisé par Erwin Rommel en Afrique du Nord, est un véritable poste de commandement avancé en contact étroit avec les troupes de première ligne.

Maquettes chars

1:72 M4A3E2 "JUMBO", 2 pcs

bientôtà nouveau disponible

Article number: 510107520 Product: 1:72 M4A3E2 "JUMBO", 2 pcs Model Dim.: 8,3 cm 2 FAST ASSEMBLY MODELS & SPECIAL WARGAME DECALS INCLUDED!

Maquettes avions militaires

1:72 Messerschmitt BF-109 G-6

bientôtà nouveau disponible

Article number: 510000063 Product: 1/72 Messerschmitt BF-109 G-6 Model Dim.: 12 cm Decals for 3 versions The BF-109 G represents the logical evolution of the earlier F version of the well-known German fighter plane, which dominated the skies during the early stages of World War II. The aircraft was equipped with a more powerful engine in order to increase speed and flying altitude. Some planes were also equipped with increased fire power to combat big Allied bombers. By the end of 1943 the BF-109 G was the backbone of the Luftwaffe and saw action on all theaters, where it was successful in matching Allied air power until the very end of the conflict.

Figurines militaires et accessoires

1:72 Murs et ruines avec accessoires

bientôtà nouveau disponible

Figurines militaires et accessoires

1:72 Operation Market Garden Hartenstein

bientôtà nouveau disponible

Detailed plastic kit   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes avions militaires

1:72 RAF EF-2000 Eurofighter Typhoon

bientôtà nouveau disponible

Article number: 510001457 Product: 1:72 RAF EF-2000 Eurofighter Typhoon The Eurofighter project, developed from the second half of the 80s by a consortium of European companies, had the aim of realizing an advanced multi-role combat aircraft strongly specialized in interception. The result of the project is the "Typhoon" that is one of the best air superiority fighters in the world. Its aerodynamic design is characterized by canard-delta wings. Thanks to its two EuroJet EJ200 turbofan engines, the Typhoon can reach a maximum speed of Mach 2. The on-board technology, enhanced by fly-by-wire control system, allows to obtain a great maneuverability in air combat duties. The British Royal Air Force together with the air forces of Germany and Italy, is the main user of the Eurofighter, with 160 units deployed in the fighter squadrons. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35

Maquettes avions militaires

1:72 RAFALE M Opérations extérieures 2011

bientôtà nouveau disponible

Article number: 510001319 Product: 1:72 RAFALE M Operations Exterieures '11 Model Dim.: 21,2 cm Decals for 2 versions - UPGRADED MOULDS - The Rafale is a fourth generation fighter aircraft manufactured by Dassault Aviation for French Air Force. Featuring a large delta wing and canard wing, and two powerful engines mounted in the tail section and a single, large rudder. It is designed to be used by the Air Force, where it replaced the Mirage F1 and 2000 and the naval aviation were replaced the Etandard F-8 Crusader. The French Navy Rafale M were extensively used in the operations conducted on Libya in the first half of 2012 alongside the variants used by air force.

Maquettes chars

1:72 Sd.Kfz. 251/1 "Stuka Zu Fuss" (Stuka à pied)

bientôtà nouveau disponible

Article number: 510007080 Product: 1:72 Sd.Kfz. 251/1 "Stuka Zu Fuss" Model Dim.: 8,1 cm The Sd.Kfz.251 half-track was an armored fighting vehicle (AFV), which was deployed by the Wehrmacht on all operational fronts during the Second World War. Powered by a Maybach 6-cylinder petrol engine it was able to reach a speed of 55 km / h even on ‘off road’ terrain. Produced in huge numbers, it was mainly used to transport ‘Panzergrenadiers’, but during the war several versions were developed to meet differing operational requirements. The Wurfrahmen rocket launcher version was built on the Sd.Kfz.251. Equipped with 6 compartments, 3 on each side, intended for the launch of rockets of different sizes, it was nicknamed "Stuka zu Fuss". Although not precise, it could have an important psychological effect on enemy troops and still proved to be a valid support for ground troops especially in urban fighting. Detailed plastic kit

Maquettes chars

1:72 Sd.Kfz.181 Véhicule de combat blindé VI(P)

bientôtà nouveau disponible

SD.Kfz.181 Pz.kampfwagen VI

Figurines miniatures

1/72e Set de figurines de l'infanterie écossaise

disponible dans le commerce

Maquettes voitures

1:12 Renault RE 20 Turbo

disponible dans le commerce

Article number: 510104707 Product: 1:12 Renault RE 20 Turbo Length of the model 383 mm In 1977 the French car manufacturer Renault made its debut in the Formula 1 world championship with a dedicated racing team that introduced important innovations in the world of competition. The F1 Renault team took part in the world championship in the 1980 season with the Renault RE20 powered by a turbocharged V6 Renault Gordini EF1 engine capable of delivering 520 HP. The team was completely French as the team of pilots composed by Jean-Pierre Jabouille, with the racing number 15 and René Arnoux with the racing number 16. During the season the team obtained three victories in the Brazil, South Africa and Austria GP. The Renault 20 series was modified and improved but in 1981 season, after the first five races, it was replaced by the 30 series with a redesigned chassis. Detailed plastic kit

Maquettes chars

1:144 Loc.arm.ger.w/Railw.Veh.Uni.&Pz.IV

disponible dans le commerce

Article number: 540014152 Product: 1:144 Ger.Arm.Loc.w/Railw.Veh.Uni.&Pz.IV The rail network played a critical logistics role in WWII, moving troops, equipment and supplies to and from widely separated frontlines. The German military used all sorts of carriages to fortify its trains against enemy attack, including sabotage by partisans or resistance forces. It was thus not uncommon to see armored locomotives and armed, protected wagons in train convoys. Dragon is releasing a scintillating set that depict distinct German trains. This set includes stunning kits of a locomotive completely covered in armor, a Flatbed Typ Ommr, a Platform wagon w/Pz.Kpfw.IV Ausf.H , a Gondola Typ Ommr and a Box Wagen. The newly tooled armored locomotives and all wagons are accurately proportioned and detailed. With such 1/144 scale out-of-the-box rolling stock now available, modelers can easily get creative and combine them with railway modeling accessories such as trees, buildings and sidings to form fantastic dioramas.

Figurines miniatures

1:16 Fig. Herm. Goering WWI As de l'aviation

disponible dans le commerce

Detailed Plastic Kit

Figurines miniatures

1:16 Fig. Preatorian Guardsman 2ème siècle AD

disponible dans le commerce

Detailed Plastic Kit

Maquettes voitures

1:16 Mercedes-Benz 300 SL Gullwing

disponible dans le commerce

Article number: 510003612 Product: 1:16 Mercedes-Benz 300 SL Gullwing Length of the model: 286 mm BACK AGAIN! The Mercedes-Benz 300 SL was produced in 1954 by the German car manufacturer and it’s a masterpiece on four-wheels for design, elegance and luxury. The 300 SL, where the acronym stands for Sport Leicht, (Sport Light), adopted innovative solutions for the time. The Mercedes 2 door coupe had a tubular frame, a front 2.996 cc longitudinal engine connected to a 4-speed transmission and the rear drive. The maximum speed of 300 SL was 260 Km/h (162 mph). The real strength of the car, however, was in its innovative design and the adoption of the characteristic and eye-catching Gull-wing doors. Even today the Mercedes-Benz 300 SL is an icon of design and style of the period ant it is a real icon for collectors and fans. Deatailed plastic kit

Camions miniatures

1:24 "The Familiy "Swissmilk Tank Trailer

disponible dans le commerce

Référence article: 510003911 Article: 1:24 "The Familiy"Swissmilk Tank Trailer répandus en Europe pour le transport de toutes sortes de liquides allant du lait aux carburants ou aux fluides chimiques. La plupart des remorques modernes sont pourvues de châssis supportés par 3 essieus à roues simples et contiennent jusqu’à 40,000 Lt. Ces remorques sont pourvues de systèmes de freinages sophistiqués ainsi que d’autres dispositifs de sécurité comme des protections contre les impacts latéraux.

Maquettes voitures

1:24 B.M.W. M1 Procar

disponible dans le commerce

Référence article: 510003643 Article: 1:24 B.M.W. M1 Procar Taille du modèle: 18,1 cm La BMW M1 a été produite par le constructeur automobile bavarois entre 1978 et 1981. Caractérisée par un design nettement sportif, elle adop-tait des solutions techniques typiques des voitures de course, telles qu’un moteur central longitudinal, un cadre en treillis et des suspensions in-dépendantes. Ayant été développée et construite pour participer aux com-pétitions du Groupe 5, où elle remporta quelques victoires, BMW décida de réaliser un championnat monomarque ProCar. Les voitures qui ont partic-ipé au championnat étaient équipées d’un puissant moteur de 470 CV et étaient conduites, entre autres, par des noms célèbres de l’univers de la Formule 1 tels que Niki Lauda, Piquet, De Angelis e Pironi. Le championnat Procar était très populaire et avait, pour l’époque, une grande visibilité dans les médias. Il fut disputé pendant deux ans. En 1979, il a été remporté par Niki Lauda et la saison suivante par Nelson Piquet.

Camions miniatures

1:24 Conteneur de transport maritime 20FT

disponible dans le commerce

Article number: 510003888 Product: 1:24 Shipping Container 20FT Model Dim.: 25,4 cm SUPER DECALS SHEET FOR 2 VERSIONS The 20-feet freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container in terms of size, volumes and loading capacity makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has became more effective and faster. Even the warehouses and stocking areas management became easier and more flexible.

Camions miniatures

1:24 DAF XF-105 Space America

disponible dans le commerce

Article number: 510003933 Product: 1:24 DAF XF-105 Space America Model Dim.: 24,5 cm SUPER DECALS SHEET FOR 2 VERSIONS This road haulage tractor by DAF is a restyled version of the successful previous series. Offering excellent reliability and a good standard of comfort on long-haul routes, the XF105 also Features very good mechanical reliability and outstanding engine performance under a wide range of conditions, in full compliance with the strictest environmental standards. Also, in the event of an accident, the cab provides the driver with an extremely high level of protection. The cabin is the ideal solution to create interesting and "eye-catching" graphics that could make the truck unique and really customized. The DAF XF-105 Space America, has been presented, in limited edition, on 2008 with the blue, black and red colors and characterized by the "stars and stripes" livery. Detailed Plastic Kit of model DAF XF-105 Space America in scale 1:24

Maquettes voitures

1:24 Fiat "500" (2007)

disponible dans le commerce

Article number: 510003647 Product: 1:24 Fiat "500" (2007) Length of the Model 148 mm In 2007, the Fiat Group presented the successor to the most iconic car of Italian automotive production: the Fiat 500. The new model features a distinctive design and interesting retro-style as modern reinterpretation of the "classic" Fiat 500 launched on the market in 1957. Thanks to its unique design, the adoption of the most innovative technological and safety solutions, the Fiat 500 is positioned on the market as a premium city car, accessible but at the same time exclusive. The wide range of versions and accessories enhance the possibility for the customer to personalize the car and make it unique. From its release on the market the car adopted several engines from the twin-cylinder petrol 895cc "Twinair" to the four-cylinder diesel 1,248 cc "Multijet Detailed Plastic Kit

Maquettes voitures

1:24 Fiat 131 Abarth Rally

disponible dans le commerce

Article number: 510003662 Product: 1:24 Fiat 131 Abarth Rally Model Dim.: 17,4 cm SUPER DECAL SHEET EXTRA CATALOGUE The Fiat 131 Abarth was built on the frame of the two-door Fiat sedan. The development made by Abarth considered several modifications and improvements starting from the reduction of the body weight using lighter materials. Then some new fenders, to permit the adoption of larger wheels, were installed and new air-intakes on the hood and on the sides to optimize the cooling of the mechanics were designed. The engine was a 4-cylinder longitudinal engine characterised by the use light alloy head and 4 valves per cylinder. The Fiat 131 Abarth was built from 1976 and it was used in the World Rally Championship where achieved important results as three manufacturers’ championship, one pilots’ championship and one FIA trophy. It took part in international competitions until 1982 when it was replaced by the Lancia brand cars. Detailed Plastic Kit of model Fiat 131 Abarth Rally in scale 1:24

Maquettes voitures

1:24 Fiat 131 Abarth'77 SanRemo RallyWin

disponible dans le commerce

Article number: 510003621 Product: 1:24 Fiat 131 Abarth'77 SanRemo RallyWin The Fiat 131 Abarth was built on the frame of the two-door Fiat sedan. The development made by Abarth considered several modifications and improvements starting from the reduction of the body weight using lighter materials. Then some new fenders, to permit the adoption of larger wheels, were installed and new air-intakes on the hood and on the sides to optimize the cooling of the mechanics were designed. The engine was a 4-cylinder longitudinal engine characterised by the use light alloy head and 4 valves per cylinder. The Fiat 131 Abarth was built from 1976 and it was used in the World Rally Championship were achieved important results as three manufacturers’ championship, one pilots’ championship and one FIA trophy. It took part in international competitions until 1982 when it was replaced by the Lancia brand cars. One of the most famous victories was the prestigious 1977 San Remo Rally. The Fiat car achieved its success with notable drivers such as J.C. Andruet and C. Delferrier. Detailed plastic kit in scale 1:32

Maquettes voitures

1:24 Ford Transit Mk. II

disponible dans le commerce

Article number: 510103687 Product: 1/24 Ford Transit Mk. II Model Dim.: 18,5 cm THIS MODEL IS A RIGHT & LEFT-HAND DRIVE Transit is a light commercial vehicles series produced since 1953 by Ford Germany and Ford UK and conceived for European market. The front engine of these vehicles allows to have a lower loading bed, which eases the loading process. Anyway the very first Transit was produced in 1965 by the German and British Ford together, expressly wanted by Henry Ford; this cooperation gave life to what is Ford Europe today and to the well-known vehicle MK I. In 1978 it was further reshaped and the MK II was born. In 1984 an esthetic restyling was made on the front bumper and to the engine, which was a 68 horsepower Diesel York of 2498 cbm. These vehicles have been a commercial success not only in Europe, as still today they are in production also for extra European markets. Detailed Plastic Kit of model Ford Transit Mk. II in scale 1:24

Camions miniatures

1:24 Freightliner FLD 120 (Classic)

disponible dans le commerce

Article number: 510003925 Product: 1:24 Freightliner FLD 120 (Classic) Model Dim.: 32,5 cm CONTAINS 2 CHROMED SPRUE - SUPER DECALS SHEET FOR 2 VERSIONS - COLOR INSTRUCTIONS SHEET Founded in 1942, with more than 70 years of activity in the commercial and industrial vehicles industry, the Freightliner Trucks company, is a piece of the road transportation history in the United States. Since 1981 the owner is the multinational corporation Daimler AG that reinforced the role of Freightliner to be a reference point on the market. One of its icons is the Freightliner FLD that was introduced on the market in 1987. It is characterized by an aerodynamic design, applied to the "conventional tractor", that was very innovative for the time. The Freightliner FLD remained in production for many years until the beginning of the 2000. A lot of versions were produced with special configurations and outfittings able to satisfy every kind of transport need. The FLD was an excellent platform for the customization and for the creativity of the American "truck drivers". Detailed Plastic Kit of model Freightliner FLD 120 (Classic) in scale 1:24   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Camions miniatures

1:24 IVECO Hi-Way 480 E5 (Low Roof)

disponible dans le commerce

Référence article: 510003928 Article: 1:24 IVECO Hi-Way 480 E5 (Low Roof) Taille du modèle: 25,4 cm Le Stralis Hi-Way est caractérisé par une série importante d’innovations technologiques et esthé-tiques qui le différencient des versions précédentes. Le design de la cabine a été revu et amél-ioré par rapport aux versions initiales : celle-ci est équipée de systèmes électroniques intégrés en mesure d’optimiser le confort à bord et la sécurité. L’évolution du Stralis a également affecté les moteurs et la boîte de vitesses. Les « powertrain » adoptés permettent de réduire la consom-mation de carburant et de minimiser les frais d’entretien. L’appareil moteur permet en effet de respecter les nouveaux paramètres antipollution imposés par la norme Euro 5 et d’assurer de bonnes performances opérationnelles. Une combinaison appréciée entre dimensions de la cabine, puissance fournie par le moteur (480 HP) et de faibles coûts de fonctionnement, a fait en sorte que Stralis obtienne un bon succès commercial sur les principaux marchés européens.

Maquettes voitures

1:24 Lamborghini Countach 25th Anniv.

disponible dans le commerce

Article number: 510103684 Product: 1:24 Lamborghini Countach 25th Anniv. Model Dim.: 18,0 cm Final version of the glorious Countach, dedicated to the 25th anniversary of Lamborghini, boasts numerous improvements, were in fact changed about 3,000 of the 8,000 pieces that make up the car. Much of the aesthetic innovations derived from the prototype Countach Evoluzione in 1986, the first supercar in the world made of carbon fiber. The air box and the air intakes were redesigned and enlarged and were mounted of miniskirts , the geometry of the suspension was modified. The improved aerodynamics allowed a maximum speed of 300 km / h. This was the last version made the Countach, which remained in production until 1990 when it was replaced by the Diablo. Detailed plastic kit

Maquettes voitures

1:24 Lamborghini Miura Jota SVJ

disponible dans le commerce

Article number: 510003649 Product: 1:24 Lamborghini Miura Jota SVJ Length of the model 187 mm NEW MOULDS The Lamborghini Miura was produced by the Italian manufacturer between 1966 and 1973. The Miura, when it was presented on the market, was a real supercar characterized by high performance and innovative design. In 1970, on the layout of the Miura, a specific version dedicated for the competitions was created through improvements on chassis and suspensions. Other significant changes where implemented on engine power and on the braking system. The commercial name of this unique car with a power of 440 Hp and outstanding performances was "Jota". However, due to several requests from customers, Lamborghini modified some Miura SV series with specification similar to Jota. These cars were identified by the acronym SVJ and became soon the dream of car experts and funs all over the World. Detailed Plastic Kit of model Lamborghini Miura Jota SVJ in scale 1:24

Maquettes voitures

1:24 Lamborghini Miura Model Set

disponible dans le commerce

Article number: 510172002 Product: 1:24 Lamborghini Miura Model Set Model Dim.: 18 cm STARTER KIT - MODEL SET SPECIAL EDITION SPRUE CUTTER AND VIDEO TUTORIAL INCLUDED Very few cars manage to change the automobile world like the Miura. With its posterior longitudinal engine V12 and fascinating body, designed by Marcello Gandini for Bertone, the two-seater redefined the concept of a sports car. At its debut the Miura was the fastest production car in the world: With a speed over 280 kph and an acceleration from 0-100 kph in 5,1 seconds the Lamborghini Miura set new standards in the sports car segment. The original Miura P400 was produced between 1966 and 1968, but the success story did not end there: The Miura was first developed further into the Miura S (1968-1971) with 370 HP and later into the Miura SV (1971-1973), which had wider mud guards and a greatly revamped 385 HP engine with separate lubricating systems for engine and gearbox. Deatailed plastic kit

Maquettes voitures

1:24 Lancia Stratos

disponible dans le commerce

Article number: 510103654 Product: 1:24 Lancia Stratos Model Dim.: 18,6 cm The Lancia Stratos HF is, without any doubts, a reference icon of Italian automotive production during the ‘70s. The Italian sport car, produced for a short period of time, has become famous for ist innovative design, its technical solutions and, above all, for the success achieved in Rally competitions. Lancia Stratos won, for the 1974, 1975 and 1976 the World Rally Championship and a lot of Italian and European titles. In terms of mechanical lay out, it adopted the 6 cylinders V engine characterized by a displacement of 2,418 cc, and the rear-wheel drive transmission. Ist unique and nice design is, even today, an attractive dream for all fans of the automotive history. Detailed Plastic Kit of model Lancia Stratos in scale 1:24

Maquettes voitures

1:24 Land Rover 109 LWB

disponible dans le commerce

Article number: 510003665 Product: 1:24 Land Rover 109 LWB The "Land Rover" was certainly one of the best known symbols of "made in England" on 4 wheels and is in fact a milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes made in 1947, to satisfy both civil and military tasks. Inspired, even if not directly, by the American Jeep, it was characterized by 4x4 all-wheel drive and a sturdy and reliable structure capable of tackling the most difficult and demanding routes. The aluminum body made it lighter but, at the same time, more resistant to corrosion and a long service life. In 1971, when the Series III was introduced, more than a million units had already been produced and built for both civil and military use, both in the 88-inch "standard wheelbase" version or in the 109 "long wheel base" version inches, the latter reproduced in the kit. Detailed plastic kit

Maquettes chars

1:24 M-24 "Chaffe" Guerre de Corée

disponible dans le commerce

Article number: 510006587 Product: 1:24 M-24 "Chaffe" Korean War The M24 Chaffee was deployed to US Army armoured battalions from 1944 onwards to provide a light battlefield tank that could effectively replace the older M3 / M5 Stuart. The configuration of the M-24 was superior to its predecessor in so many ways that it can be considered one of the foremost light tanks that were ever produced. Agile, robust and reliable, it had as its main armament a 75mm M6 cannon with 48 rounds available, a very powerful version indeed of a "light tank". The tank’s armament was complete with its two 12.7 mm Browning machine guns. Following the conclusion of the Second World War, where it’s capabilities had been fully demonstrated, it participated in the Korean War providing support to M4 Sherman tanks and the heavier M26 Pershing. It was also effectively utilised in advanced reconnaissance roles or providing close infantry support. Detailed plastic kit in scale 1:24

Maquettes voitures

1:24 Mercedes Benz 600S

disponible dans le commerce

Référence article: 510003638 Article: 1:24 Mercedes Benz 600S Taille du modèle 20,5 cm PIÈCES CHROMÉES - FICHE D'INSTRUCTIONS COULEUR La nouvelle Classe S comporte plus de 30 différentes innovations technologiques dont quelques systèmes «intelligents» rendant la conduite plus agéable et plus sûre. Le dispositif «CoMand» (Cockpit Management and Datasystem) visualise sue en écran logé dans la console centrale les informations relatives au véhicules et au trafic routier. Il affiche également toutes les informations provenant du système de navigation GPS. La Classe S est également dotée d’un équipement audio complet radio-cassette-CD, d’un téléphone et d’une télévision.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes voitures

1:24 Mercedes Benz G 230

disponible dans le commerce

Article number: 510003640 Product: 1:24 Mercedes Benz G 230 Length of the model 19,3 cm The Mercedes-Benz G-Class (G stands for Geländewagen, ie off-road) is a vehicle produced by the German company Mercedes-Benz since 1979 in different series. In some European countries it was marketed as Puch G. By 2017, over 300,000 were built. The history of the G-Class has its roots in 1972, when the leaders of the German company made an agreement with the Austrian Steyr-Daimler-Puch for the production of a modern and elegant off-road vehicle, but also robust and efficient, in short, suitable for any use. The production of the G-Class basically consists of three generations, all of which share the same mechanical architecture and the same basic structure, of the separate-chassis type with all-wheel drive, gearbox with reduced gears and rigid axle suspension (only in the third generation and limited the independent wheel solution was introduced to the front end only). In the first versions put on the market the gearbox was of the manual 4-speed type, although later on the transmission variants would have diversified to a considerable extent. The first generation was also produced under the Peugeot brand under the name of Peugeot P4: the other two series were produced more or less in the same period.

Maquettes voitures

1:24 Mercedes-Benz G230 Pompiers

disponible dans le commerce

Article number: 510003663 Product: 1:24 Mercedes-Benz G230 Feuerwehr Following its operational successes during WW1, the Italian "Regia Marina" continued with further post- war developments into various underwater and surface assault vehicles. The Motoscafo da Turismo Modificato (M.T.M.) for example, was designed to ensure a covert and rapid approach to targets with a low risk of detection from enemy forces. Closing in on the target, the pilot then adjusted the rudder to maintain direction and propelled the fast small boat on a collision course to the target. The pilot, positioned at the stern, jumped from the craft at a safe distance before the collision. The high explosive charge positioned in the bow of the Barchino detonated upon impact against the target. The most successful deployment of the ‘Barchino’ by the Italian Regio Marina, was the assault led by Luigi Faggioni on the Royal Navy heavy cruiser HMS York at Suda Bay, Crete in 1941. Detailed plastic kit in scale 1:35

Camions miniatures

1:24 Mercedes-Benz MP4 Big Space

disponible dans le commerce

Article number: 510003948 Product: 1:24 Mercedes-Benz MP4 Big Space Model Dim.: 26,9 cm NEW PARTS CHROMED ADESIVES The SdKfz.251 half-track was an armoured fighting vehicle and was used by the Wehrmacht on all fronts, during the Second World War. Powered by a Maybach 6-cylinder petrol engine was able to achieve, even in off-road terrain, the speed of 55 km / h. Produced in huge numbers, it was mainly used to transport the "Panzergrenadiers" but, during the war, several versions has been developed to meet various operational needs. The half-track SdKfz.251/8 Krankenpanzerwagen was outfitted and used as armored ambulance to operate close to the frontline. Capable of carrying up to eight seated casualties or four seated casualties and two stretcher cases, the vehicle was equipped with first aid tools.

Maquettes voitures

1:24 Porsche 934 RSR

disponible dans le commerce

La Porsche 911 Turbo Carrera RSR a été construite en 1974 en quatre exemplaires pour participer à la saison de course du Championnat du Monde des Marques. Cela signifie que l'usine participe avec une et parfois deux voitures sous les couleurs du Martini Racing Team, et confiées aux équipages officiels Muller - van Lennep et Koinigg - Schurti. Bien qu'elles aient presque la même puissance (environ 500 ch) que leurs rivales, les Porsche n'ont ni la légèreté ni la maniabilité de ces dernières, qui courent dans la catégorie Prototype. Cependant, une heureuse combinaison de vitesse et de fiabilité a permis d'obtenir des résultats honorables dans les neuf courses du calendrier, dont deux deuxièmes places : une aux 24 Heures du Mans et une aux 6 Heures de Watkins Glen.

Maquettes voitures

1:24 Porsche 956

disponible dans le commerce

Article number: 510003648 Product: 1:24 Porsche 956 Length of the model 199 mm SUPER DECALS SHEET The Porsche 956 was built by the German manufacturer in 1982 to participate in the World Sport-Prototype Championship in the new Group C category. The "956" was a radical revolution compared to the previous Porsche 936 that won several competition between 1976 and 1981. Porsche to be comply with the new championship’s regulations introduced on the new "956" several technical innovations as the aerodynamic solutions and the aluminium monocoque chassis. The engine was the reliable 2,650 cm3 6 cylinders turbocharged engine able to release 635 Hp. Porsche 956 proven to be an effective and successful Sport car winning several Sport-Prototype Championships and four editions of the famous 24 Hours of Le Mans the World’s oldest sport car race in endurance racing. Detailed Plastic Kit

Camions miniatures

1:24 Scania 143m Topline 4x2

disponible dans le commerce

Référence article: 510003910 Article: 1:72 Scania 143m Topline 4x2 Le Scania 143M a représenté une référence pour le transport de poids lourds à partir de la fin des années 80 jusqu'à la moitié des années 90. Le Scania 143M, assemblé sur le site de production de Södertälje en Suède, a été un des modèles les plus réussis de la « série 3 », introduite par Scania en 1987 et qui a suivi l'innovante « série 2 » des années 80. Le Scania 143M, en particulier dans la version 4x2, s'est rapidement affirmé comme solution idéale pour le transport routier de poids lourds grâce aux qualités de flexibilité et fiabilité de la motrice scandinave. Il a adopté différentes configurations de moteurs, parmi lesquels le V8 de 500 Chevaux, associé à une boite de 16 vitesses. Encore aujourd'hui, après de nombreuses années, depuis la fin de la production, il est rappelé par les routiers pour ses dotes routières et pour son confort de marche.

Camions miniatures

1:24 Scania Streamline 143H 6x2

disponible dans le commerce

Article number: 510003944 Product: 1:24 Scania Streamline 143H 6x2 Model Dim.: 28,0 cm SUPER DECALS SHEET The Scania R143H 6x2 was a powerful and reliable truck used to perform transportation duties on medium and long range. This version was equipped with a V8 engine, characterized by its low fuel consumption and its high efficiency. The cabin, with its rounded shape, was designed to provide the highest level of the safety at those time and tested in the wind tunnel to reduce the airflow impact. Commercial effectiveness and great reliability have immediately made the Scania truck a point of reference on the market, achieving good sales success all over the World. Detailed Plastic Kit of model

Camions miniatures

1:24 Scania T143H 6x2

disponible dans le commerce

Article number: 510003937 Product: 1:24 Scania T143H 6x2 Model Dim.: 31,3 cm COLORS INSTRUCTIONS SHEET - SUPER DECALS SHEET FOR 2 VERSIONS The Scania R143H 6x2 is a strong, reliable truck which is used for hauling heavy loads over long distances. The V8 engine is Europe’s strongest and most reliable truckengine, which makes high speeds possible at a low fuel consumption. The R-type cab with its rounded edges and slanted windscreen has been developed in a windtunnel. It also meets the most stringent safety regulations. Scania trucks are being used in more than 60 countries all over the world, from Lapland to Australia. Detailed Plastic Kit of model Scania T143H 6x2 in scale 1:24

Maquettes voitures

1:24 Toyota BJ-44 LandCruiser So./Ha.Top

disponible dans le commerce

Article number: 510003630 Product: 1:24 Toyota BJ-44 LandCruiser So./Ha.Top Since its launch in the early 1950s, the Toyota Land Cruiser has built a reputation for being a reliable and durable off-roader. Nevertheless, the classic has continued to develop in terms of design, equipment, engine and other technological features. One of the best-known and most popular models is the "J-40" series, which was produced from the 1960s to the 1980s. From 1977 the Land Cruiser was also known in Germany. The J-40 was available in three different wheelbases: short (BJ40), medium (BJ-44) and long (BJ45). Detailed Plastic Kit

Maquettes éditions limitées

1:250 Kit d'assemblage facile PARTHENON

disponible dans le commerce

Article number: 510068001 Product: 1:250 PARTHENON easy assembly kit Model Dim.: 15 x 29 cm 100% NEW MOULDS Easy assembled model kit with an interlocking technique The box includes also the plastic parts for realizing the temple and Reference Leaflet Interior: reproduction of Athena Parthenos, decorations, marble, floor and columns. Inside the Reference Leaflet with historical features, instruction and color indication In ancient times Athens was built around the hill of the Acropolis, on a plain bordered by two small rivers, the Eridanus in the north and the Ilisos in the south. Today the area is only dominated by the Parthenon. The great temple, which Pericles entrusted to the care of the architects Ictinus and Callicrates and to the artistic supervision of Phidias, was built between 447 and 432 B.C. to replace the previous archaic building, called Hekatòmpedon, which literally means "one hundred feet long". Built in pentelic marble in Doric style, the Parthenon was internally divided into two main rooms: the cell, with the statue of Athena Partenos ("the Virgin"), made by Phidias in gold and ivory and high over 12 metres; on the back, the real Parthenon, a colonnaded hall reserved to the young virgins engaged in the worship of the goddess. The decoration of the friezes, which was assigned to Pidias, the greatest sculptor of the time, contributed to make the temple even more beautiful temple, making it a formidable vehicle of complex ideological messages.making it a formidable vehicle of complex ideological messages. Detailed Plastic Kit of model PARTHENON easy assembly kit in scale 1:250

Maquettes avions militaires

1:32 Mirage III C

disponible dans le commerce

Article number: 510002505 Product: 1/32 Mirage III C Model Dim.: 43,6 cm 100% NEW MOULDS - SUPER DECALS SHEETS FOR 6 VERSIONS - COLOR INSTRUCTIONS SHEET - PHOTO ETCHED FRET INCLUDED The Dassault Mirage III is a reference point of the French aircraft production. It has been produced from the early sixties to provide to Armée de l’Air, the French Air Force, a reliable and effective fighter aircraft. The Mirage III rapidly became a commercial success and it was widely exported to several Countries taking part to a lot of conflicts between the seventies and the eighties. Characterised by the delta wing design without horizontal tail plane, thanks to its Snecma Atar afterburning turbojet, it was able to exceed the speed of Mach 2. The Mirage IIIC, in particular, was the single-seat interceptor versions, and it has been configured to perform air-superiority tasks. It was armed with two 30 mm DEFA cannons, under the cabin, and with store pylons able to carry IR air-to-air missiles, as AIM-9 Sidewinder or Matra Magic, and Radar Guided Missiles. Deatailed plastic kit of model Mirage in scale 1:32

Maquettes avions militaires

1:32 Mirage III E/R

disponible dans le commerce

Article number: 510002510 Product: 1/32 Mirage III E/R Model Dim.: 24,5 cm NEW MOULDS SUPER DECALS SHEET + PHOTO ETCHED PARTS+ COLOURED INSTRUCTION SHEET INCLUDED The Dassault Mirage III is a reference point of the French aircraft production. It has been produced from the early sixties to provide to Armée de l’Air, the French Air Force, a reliable and effective fighter aircraft. The Mirage III rapidly became a commercial success and it was widely exported to several Countries taking part to a lot of conflicts between the seventies and the eighties. Characterised by the delta wing design without horizontal tail plane, thanks to its Snecma Atar afterburning turbojet, it was able to exceed the speed of Mach. After the introduction of the single-seat interceptor Mirage IIIC, a new multirole and strike version has been implemented. The Mirage IIIE was born and it has been a successful version produced in a significant number of units. It was characterised by a forward fuselage extension to permit the installation of the new avionic system. From the same airframe, including the fitting of cameras in the nose, Dassault has also been developed the reconnaissance variant designed as Mirage IIIR. Detailed Plastic Kit of model Mirage III E/R in scale 1:32   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes chars

1:32 Moteur Dt. SdKfz.181 Tiger (fr.Pr.)

disponible dans le commerce

Maquettes avions militaires

1:32 Panavia "TORNADO" ECR

disponible dans le commerce

Article number: 510002517 Product: 1:32 Panavia "TORNADO" ECR The Tornado arose from a collaborative project between Italy, Germany, and the United Kingdom to produce a multi-role high-performance combat aircraft. The primary requirement however was to develop a ‘state of the art’ modern aircraft able to perform low-altitude penetrating strike missions. This need was met by the development of a twin-engine combat aircraft with a variable-sweep wing. The Tornado IDS (Interdictor / strike) was the first version to be released by the British Royal Air Force and designated GR.1 Tornado IDS (Interdictor / strike), an aircraft ideally suited to attack roles, was the initial version used by the Flight Squadrons of the three countries that developed the plane, the Italian Aeronautica Militare , the German Luftwaffe and the UK RAF. The Tornado ECR (Electronic Combat / Reconnaissance) was developed by Italy and Germany and was equipped to carry out missions that suppressed enemy air defences (SEAD), and to conduct electronic warfare and advanced reconnaissance Detailed plastic kit in scale 1:32

Maquettes avions militaires

1:32 TF-104G

disponible dans le commerce

Article number: 510002509 Product: 1:32 TF-104G Model Dim.: 52,0 cm FULLY UPGRADED MOULDS FINELY ENGRAVED RECESSED PANEL LINES AND RIVETS - FULLY DETAILED ENGINE , COCKPIT , AND AVIONICS BAY - OPEN OR CLOSED AIR BRAKES - 2 HUGE DECALS SHEETS FOR 8 VERSIONS - INSTUCTIONS SHEET WITH COLOR PROFILES (8x4 plates) - 390 PARTS (343 PLASTIC PARTS, 47 PHOTO-ETCHED PARTS) The Lockheed F-104 Starfighter is one of the most famous fighters in the history of aviation and also one with the longest operational life: its history began at the end of the 50s and ended, for some air forces, in mid 2000s. From its unique aerodynamic design, characterized by slender fuselage and very little wing surface, was developed the combat-capable two-seat advanced trainer version TF-104. Among the most widespread version, the TF-104G, produced by Lockheed was a fundamental training step for all the combat pilots before to seat in the F-104G or F-104S single-seat fighter version cockpits. Compared to the single-seat, the TF-104G didn’t have the 20 mm gun and the centerline pylon but, thanks to the General Electric J79 turbojet engine, the pilot and the Trainer could have the same flight experience and performance of the fighter version. A lot of N.A.T.O. air forces used the TF-104G to perform training duties as Belgium, Holland, Norway, Spain, Turkey, Germany and Italy. Deatailed plastic kit of model TF-104G in scale 1:32

Maquettes avions militaires

1:32 Tornado IDS 40e anniversaire

disponible dans le commerce

Numéro d’article: 510002520 Produit: 1:32 Tornado IDS 40th Anniversary Le projet du Tornado est né de la collaboration entre l'Italie, l'Allemagne et le Royaume-Uni pour réaliser un avion de combat multifonction avec des performances de vol élevées. C’est ainsi qu’a été développé un avion bimoteur, avec une configuration biplace et des ailes à géométrie variable pour mieux répondre à son rôle principal : un chasseur-bombardier supersonique de basse altitude en mesure de « suivre » le profil du terrain Le Tornado IDS (Interdictor/Strike), idéal pour les missions d’attaque, a été le premier à être utilisé par les services opérationnels de vol des trois pays qui ont développé le projet. À partir du projet initial, la version ECR (Electronic Combat/Reconnaissance). Le Tornado IDS a été utilisé dans différents scénarios où il a pu démontrer son efficacité opérationnelle.