RC systems

RC servos

1:10 KO RSx4S-one10X, servo, low profile

€124.99

The KO RSx4S-one10X is a 1:10 low-profile servo shaped for compact RC chassis where installation height and steering packaging need careful control. Its metal gear layout and the stated 11.8 V specification place it firmly in performance-focused electronics setups, giving model-building enthusiasts a concrete steering component for advanced builds. The low-profile housing suits layouts where body clearance, linkage position and surrounding electronics leave little spare room. In that context, the 0.10-second speed figure supports fast steering response when direction changes need to happen with little delay. The servo format also makes it relevant for 1:10 on-road and competition-style configurations that rely on tidy component placement rather than oversized hardware. As an electronic control component, it belongs in a build where the steering system, power supply and chassis geometry are chosen as a matched package. On the bench, the compact form helps when planning a clean electronics layout around the steering area. Once installed in a compatible 1:10 model, the combination of low-profile dimensions, metal gears and high-voltage operation supports focused tuning for precise handling response.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

2.4GHz KR-242XT Receiver, 4-channel radio unit

€74.99

The KR-242XT is a compact 2.4GHz 4-channel receiver made for hobby-grade RC installations where clean electronics packaging and dependable channel allocation matter. Its short-format design suits model layouts with limited installation space, while the 4-channel configuration leaves room for more than the core driving functions in compatible radio-controlled builds. Within an RC setup, the receiver acts as the link between transmitter commands and the vehicle's onboard electronics, making channel management a central part of the build. The KR-242XT is positioned for enthusiasts who work with detailed model configurations and need a receiver that fits neatly into tighter chassis sections. The 2.4GHz specification places it in the current standard for modern radio control systems, and the compact housing supports tidy cable runs around surrounding components. With an age marking of 14 Years, it sits clearly in the hobby segment rather than entry-level toy use. This format suits workshop upgrades, replacement installations, and fresh RC builds where the electronics package needs to stay compact. In a carefully planned chassis layout, a short receiver can make the difference between a crowded interior and a cleaner, more accessible arrangement.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

6K Reflex Stick Pro 4 WP Receiver, RC receiver

€42.99

The 6K Reflex Stick Pro 4 WP Receiver brings compact radio control hardware to RC vehicles and boats that need dependable 2.4 GHz signal handling in a small format. With 6 channels in a waterproof housing, this receiver supports steering, throttle and additional functions while fitting into installations where space is limited. Its housing measures 46 x 28 x 17 mm and the unit weighs 13 g, so the receiver can be positioned in many chassis layouts without taking up much room. As a replacement receiver, it is made to work with the FS 6K Reflex Stick Pro 4 and the FS 6K Reflex Stick Pro 4 LCD remote controls named in the product data. The 2.4 GHz frequency range supports stable command transmission for models that rely on precise radio response. The 6-channel layout also leaves room for more complex function control than a basic 2-channel setup. In a trail truck, work vehicle, boat or other RC build with several switchable functions, the receiver supports a tidy electronics layout and clear channel allocation. Age 14 Years+

RC servos

CS-10 Digital Servo, RC servo, waterproof

€31.99

Compact RC control systems rely on a servo that turns radio signals into exact movement, and the CS-10 Digital Servo is built for that task with digital regulation, waterproof construction and a JR plug layout. The black housing with metallic centre section and splined output shaft is shaped for installation in common model applications where steering, throttle or other linkages need controlled travel. Its 0.17-second response supports quick actuation, while the 10 kg torque rating provides the force needed for demanding control duties. Ball bearings support the output shaft for smooth running, and the metal gear train is designed for direct transfer of servo movement to the connected horn and linkage. Included mounting hardware expands setup options with a single-arm horn, an X-shaped horn with multiple linkage holes, rubber grommets and a fastening screw. The 3-wire lead uses the familiar red, black and white layout seen across many RC installations. In an RC car, the servo can manage steering inputs through the splined shaft and horn geometry; in a boat or other hobby mechanism, it can drive throttle or moving control parts with the same compact format. The waterproof design also suits outdoor running where spray and damp conditions are part of the session.  Warning! Not suitable for children under 14 years.

RC servos

CS-17 Digital Servo, RC servo, waterproof

€34.99

The CS-17 brings digital servo control, waterproof construction and 17 kg actuating force into a compact RC component built for precise movement in demanding model setups. With a stated speed of 0.19 sec and a JR connector on the 3-wire lead, it suits steering, throttle and brake functions where clean signal response and dependable installation matter. The housing combines black end caps with a silver centre section, and the top output shaft is metal with a splined interface for secure horn mounting. Side tabs with screw holes support fixed installation in model vehicles or boats, while the included single-arm horn and 4-arm horn offer different linkage layouts. Multiple adjustment holes on the horns make it possible to alter leverage and control travel to match the mechanism in use. Rubber grommets are included for vibration-damped mounting, and the central fixing screw secures the horn to the output shaft. In an on-road chassis, off-road build or boat hull, the servo can be assigned to the moving function that needs measured, repeatable input. The combination of digital operation, waterproof design and included mounting hardware makes the CS-17 a focused choice for hobby workbenches, replacement jobs and fresh RC builds.  Warning! Not suitable for children under 14 years.

RC servos

CS-7 Digital Servo, RC servo, waterproof

€29.99

The CS-7 Digital Servo brings fast digital control to RC installations that need crisp, repeatable movement. With a stated transit time of 0.17 s, this regular-size servo suits steering, throttle or other control functions where quick response and accurate linkage travel matter. The black and silver housing carries a waterproof design, adding flexibility for models that run in wet grass, on damp ground or around spray. Inside the compact case, the servo combines a 7 kg force rating with ball bearing support at the output shaft. That layout helps the spline run smoothly when the horn changes direction under load. The top output shaft accepts the supplied servo horns, including a single-arm horn and a 4-arm horn with multiple linkage holes for different geometry choices. Mounting tabs on the case and the included rubber grommets support secure installation in a chassis, frame or other model structure. The attached 3-wire lead uses a JR plug for connection to compatible radio systems. In cars, boats, aircraft or other hobby mechanisms, the CS-7 Digital Servo fits wherever controlled rotary movement needs to be translated into precise mechanical action. Age marking: 14 years  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio system into a 4-channel transmitter built for fast, exact control on the track. High resolution signal processing and a redesigned electronic layout work together for a notably direct steering response, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. The set includes the KR-242XT receiver with long antenna for telemetry use. Its menu structure goes far beyond basic trim changes. Steering functions cover servo travel limit, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, auto-start, idle-up, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. A display, conversion calculator, VR information, sound settings and adjustable menu speed keep setup work clear at the bench between runs. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V, or a LiPo rechargeable battery 2S 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 2.4 GHz transmitter built for fast, exact control. Its redesigned electronics deliver a highly direct steering feel and, in XT Advanced Mode, transmission speed up to 3 times faster than the EX RR. The included KR-242XT receiver with short antenna completes the core setup for telemetry use. A 4-channel PWM or serial layout gives the system a broad technical base for competition-focused RC driving. Steering functions include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim or balance and servo reverse. Throttle and brake adjustment extends further with 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way switching, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The transmitter measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving a substantial handheld format for longer sessions at the track. Timer functions include lap history, trigger start, lap navigation and alarm mode for structured race practice. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately. Age 14+  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 4-channel 2.4 GHz

€439.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 4-channel transmitter built for fast, exact control. High resolution signal processing and the redesigned electronics work together for a notably direct steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. In the hand, the 240.5 x 163.0 x 107.2 mm format and 551 g weight create a substantial control unit for focused driving sessions. Its menu depth goes well beyond basic steering and throttle adjustment. Steering settings include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake functions add 3-stage forward and reverse speed, acceleration, push control, auto-start, idle-up, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way functions, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. Telemetry features cover RF mode, pairing, Real-Time ICS and battery failsafe, while timer functions include lap history, trigger start, alarm mode and lap navigation for track-focused running. The set comes with 2 KR-242XT receivers with short antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V or a LiPo rechargeable battery 2S 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC RC transmitter, 4-channel 2.4 GHz

€399.99

The EX-NEXT BASIC RC transmitter brings KO Propo control hardware into a focused 4-channel 2.4 GHz format built for fast, accurate driving. XT radio technology and newly developed electronics work together for highly precise response, with XT Advanced Mode reaching up to 3 times the transmission speed of the EX RR. The result is a notably smooth steering feel and direct control input that suits racing, competition and high-performance RC models. Its setup depth goes well beyond basic trim functions. Steering adjustment covers servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake tuning add 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, brake-in, hand brake and override. Timer functions include lap history, trigger start, lap navigation and alarm mode, while system tools add display settings, menu speed, battery information and a conversion calculator. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the unit a substantial hand-held format for track sessions and bench setup alike. The set includes 1 KR-242XT receiver with long antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery 6.6 V or a 2S LiPo rechargeable battery 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT Basic, transmitter set, 4-channel 2.4 GHz

€439.99

Fast response and fine control define the EX-NEXT Basic transmitter set for ambitious RC driving. The 4-channel 2.4 GHz system uses the XT radio standard and combines the EX NEXT master unit with LCD, Xpansion Unit 2 EXP 201, Extension Unit 2.1 Basic and Grip Unit 2 Basic in one configured setup. The electronics platform supports XT Telemetry as the factory RF mode and reaches up to 3x the transmission speed of the EX RR in XT Advanced Mode. Real-Time ICS, pairing functions, battery failsafe and a wide system menu expand the setup range beyond basic driving adjustments. The transmitter measures 240.5 x 163.0 x 107.2 mm, weighs 551 g excluding batteries and has a power consumption of 200 mA. Timer functions include trigger start, lap history, lap navigation, alarm mode and start stop control, adding useful race-day data handling alongside the driving setup. Compatible receivers are listed as KR 420XT and KR 242XT, and this version comes with 2 KR-242XT short antenna receivers. Power is supplied separately via 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery at 6.6 V or a 2S LiPo rechargeable battery at 7.4 V. The broad menu structure suits competition sessions, multi-car pit setups and detailed tuning work on performance-focused RC models.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC, transmitter, 4-channel 2.4 GHz

€419.99

The EX-NEXT BASIC transmitter brings KO Propo control technology into a focused 4-channel 2.4 GHz format built for precise RC driving. XT radio standard and high-resolution signal processing work together for very fast response and a notably smooth steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. On the bench or at the track, that combination supports direct inputs and clean corrections through technical sections. Its control architecture goes well beyond basic steering and throttle adjustment. Steering functions include servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, push control, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3-8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the transmitter a substantial hand feel for longer sessions. Model selection, model copy, model reset and 50 memory slots support fleets with different setups, while the timer menu adds start timer, trigger start, lap button and lap navigation for repeatable practice runs. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz

€119.99

The FS 14K Reflex Stick Pro 4 brings a 14-channel layout, 2.4GHz transmission and a modern ergonomic RC housing into one control system shaped for complex model functions. Its carbon-look surface and illuminated logo give the transmitter a technical, workshop-ready appearance when powered on. The channel structure is designed for detailed function control. Four channels work continuously and fully proportionally for direct response through the control sticks, while channels 7, 8, 9, 10, 13 and 14 are assigned to 3-position toggle switches. Channels 5, 6, 11 and 12 operate through 3-position push buttons with centre position, creating a clear split between proportional inputs and switched functions. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply allows up to 11 V without BEC. A 15-channel receiver is listed in the included contents. For setup work, channels 1 to 4 feature servo reverse and trim, and channels 1 and 4 add dual rate for servo travel adjustment. This makes the system suitable for models that need tailored steering, throttle or auxiliary function behaviour. 100% compatibility is stated for TAMIYA MFC 01, MFC 02, MFC 03 and DMD units, which suits truck and function-model layouts with multiple switching tasks. 14 Years is stated as the recommended age.

Remote-controlled systems

FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz

€149.99

The FS 14K Reflex Stick Pro 4 LCD 2.4GHz brings broad channel control and fine setup options into one radio system built for demanding RC models. With 14 channels, an LCD layout and a 15-channel receiver in the set, it supports complex functions that go beyond basic steering and throttle, while the carbon-look finish and illuminated logo give the transmitter a distinctive technical appearance. Channels 7, 8, 9, 10, 13 and 14 use 3-position toggle switches, while channels 5, 6, 11 and 12 use 3-position push buttons with centre position. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply can reach up to 11 V without BEC. A Graupner J/R connector system is used for integration, and the radio is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as DMD units. The set includes the 14-channel LCD remote control, a 15-channel receiver and a manual. For truck, construction and function models with multiple switching tasks, the channel layout supports lighting, sound and auxiliary functions from one handset. The 14 Years marking fits advanced RC use, where stored model setups and detailed channel assignment matter during regular driving and system changes.

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

€99.99

The FS 6K Reflex Stick Pro 4 2.4GHz brings 6-channel radio control into a layout built for detailed model setups and precise handling. Four continuously adjustable, fully proportional channels work alongside a 3-position push button on channel 5 and a 3-position toggle switch on channel 6, giving a clear control structure for driving functions and switched features. The integrated failsafe system adds an important control function for model operation. Trim for channels 1-4 supports exact correction directly at the transmitter, while dual rate for channels 1-2 adjusts servo travel for a more tailored response. The control sticks use precise, smooth mechanics, and the housing combines an ergonomic shape with a carbon-look surface and an illuminated logo when powered on. The transmitter operates at 4.8-6 V with 4 AA cells, the receiver power supply reaches up to 11 V without BEC, and the connector system uses Graupner J/R. Compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units expands the range of suitable model applications. On the bench, the channel layout supports careful setup of steering, throttle and auxiliary functions before a model heads out. During driving sessions, the separate switching options and proportional control help keep inputs clean and deliberate across different model configurations.

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

€109.99

The FS 6K Reflex Stick Pro brings 2.4GHz radio control, a 6-channel layout and an LCD interface into one focused setup for model driving with a clear, technical feel in hand. Smooth control sticks, an ergonomic housing and a carbon-look surface shape a transmitter that suits longer sessions at the workbench and on the track alike. Channels 1 to 4 are continuously adjustable and fully proportional, while channel 6 is assigned to a 3-position toggle switch and channel 5 to a 3-position push button with centre position. The transmitter stores 15 model memories, making it easier to keep separate configurations ready for different vehicles. For channels 1 to 4, servo reverse changes direction of movement, trim corrects neutral position, dual rate adjusts servo travel, EPA limits servo travel and EXP changes response characteristics around centre input. The receiver power supply can reach up to 11 V without BEC, and the system is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as the DMD unit. A 6-channel receiver and manual are included. 4 AA cells are required separately for the 4.8 to 6 V transmitter operating voltage. With a minimum age marking of 14 years, this radio set fits hobby-focused RC setups where multiple channel functions, stored profiles and detailed response adjustment matter during driving and setup.

RC servos

KO BSx4S-one10 Grasper2, Models Supplies

€174.99

KO BSx4S-one10 Grasper2 appears in the supplied conformity data as an electronic component within models supplies, carrying the exact designation KO BSx4S-one10 Grasper2 LP/MG/12,1/0,11. That precise naming helps place it within a hobby setup where exact component matching matters. The available data is technical rather than promotional, so the description stays close to what is verifiable. The component is listed under Models & Accessories and Models Supplies, with a 14 Years age marking in the source data. Battery inclusion is stated as false, which means no battery is named as part of the included contents here. The documentation also records an EU declaration of conformity issued under the manufacturer's responsibility, with references to 2014/30/EU, 2011/65/EU and 1907/2006. Harmonised standards EN55014-1:2021 and EN55014-2:2021 are named in that declaration. For model-building enthusiasts, this kind of exact designation supports careful parts selection when maintaining, replacing or specifying electronics in a compatible RC build. The source data does not provide further functional specifications, dimensions or included accessories, so the focus remains on the documented identity and compliance references of the component.  Warning! Not suitable for children under 14 years.

RC servos

KO BSx4S-one10 Grasper2, servo, one10

€184.99

The KO BSx4S-one10 Grasper2 brings a focused servo setup to one10 RC builds, combining a 0.12-second transit speed with a 33 torque rating for direct control input in running and tuning sessions. Its STD and MG specification places it in the standard-size class with metal gear construction, a combination that fits the practical demands of hobby-grade model sport use. Within an RC chassis, the servo is the link between radio command and mechanical movement, and that role makes speed and consistency central to the driving feel. This unit is intended for model applications where steering accuracy or throttle actuation needs a compact, dedicated control component rather than a generic replacement. The 4S designation in the name identifies the series variant, while the one10 reference ties the servo to the widely used 1:10 model class. Batteries are not included. In workshop use, the servo suits fresh assemblies, drivetrain updates and targeted replacements where a standard-format control unit is needed. On the track or during car park running, it supports clean directional changes and controlled input transfer through the steering or throttle linkage, giving hobby builds a clearly defined electronic control element.  Warning! Not suitable for children under 14 years.

RC servos

KO ICS-USB Adapter HS Servo/ESC Software

€34.99

The KO ICS-USB Adapter HS Servo/ESC Software adds a direct computer link for supported model electronics setup. Built for use with KO HS servo and ESC software, it connects compatible components to a PC-based software environment where settings can be adjusted with more precision than through on-model controls alone. This accessory belongs in the model workshop where electronic behaviour is tuned to match the chassis, surface and driving style. Servo response, ESC parameters and related software-based adjustments can be handled through the adapter when used with supported systems. Its USB connection makes it a practical bridge between model electronics and screen-based setup work, keeping repeated changes organised during testing or maintenance. Batteries are not included. On the bench before a run, the adapter supports structured setup sessions for supported servo and ESC combinations. It also fits ongoing maintenance work when electronics need reconfiguration after component changes, helping hobbyists return to a known setup with less guesswork.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

KO KR-420XT 2.4GHz, receiver, 4-channel

€119.99

The KO KR-420XT 2.4GHz receiver brings a focused electronics component into RC model setups with 4-channel control and a compact format suited to tight installation spaces. In a vehicle build where every millimetre matters, this short receiver layout helps keep the radio system neatly arranged while maintaining the core link between transmitter input and onboard response. As a dedicated receiver, the KR-420XT sits at the centre of signal transfer inside the model and supports the coordination of steering, throttle and further switched or proportional functions across 4 channels. The 2.4GHz specification points to modern radio operation within compatible systems, while the clearly stated KO KR-420XT designation helps when planning replacements, system updates or workshop organisation. This is a component-led choice for hobby benches that rely on exact matching rather than generic electronics swaps. Installed in an RC vehicle, the receiver becomes the quiet control hub behind each driving command, from first system setup to regular running sessions. The 14 years age marking is stated for this hobby component, fitting model-building environments where radio equipment is selected and integrated as part of a broader technical setup.  Warning! Not suitable for children under 14 years.

RC remote controls

KO MC-8 TR Set, radio set, 8-channel 2.4 GHz

€119.99

The KO MC-8 TR Set brings compact 8-channel radio control to function-rich RC installations, combining the MC-8 transmitter, the MR-8 receiver and the Xpansion keypad in one coordinated setup. With 2 dual thumb sticks, channels A to H and trim controls for channels A to D, the layout supports direct command over steering, drive and additional assigned functions while keeping the controller body easy to handle. The top keypad extends the system with dedicated inputs for functions shown on the panel, including light position, hazards, left and right turn signals, horn, main beam and engine-related commands on compatible vehicle systems. The MR-8 receiver provides 8 channel ports marked A to H plus a battery connection, giving hobby builds a clear structure for wiring multiple functions into one radio system. The set operates at 2.4 GHz and is specified for 4.8-6 Volt, matching common RC electronics layouts. Age 14 Years. This configuration suits scale trucks, special-function vehicles and other hobby builds where more than basic steering and throttle are part of the driving session. Lighting, signal and sound functions can be called up directly from the transmitter, so complex model setups stay manageable during operation.  Warning! Not suitable for children under 14 years.

RC servos

KO Neo Advantage Capacitor+, ESC accessory

€35.99

The KO Neo Advantage Capacitor+ for BL ESC is an RC electronics accessory aimed at hobby-grade model setups, with a clear focus on brushless ESC applications. Its compact add-on role suits enthusiasts who fine-tune existing vehicles and control systems rather than starting with a complete ready-to-run package. Placed in the Models & Accessories and Models Supplies range, this component belongs to the technical side of RC building, where each part is chosen for a specific task in the drivetrain or control layout. The supplied compliance record identifies the KO Neo Advantage Capacitor+ for BL ESC by name and documents EU declaration of conformity references to 2014/30/EU, 2011/65/EU and 1907/2006. Harmonised standards EN55014-1:2021 and EN55014-2:2021 are also listed in that record. Batteries are not included. In practical workshop use, this kind of accessory fits into upgrade, maintenance and replacement routines around brushless speed controller installations. It suits RC benches, pit boxes and parts collections where dedicated electronics components are selected to match an existing model setup. The age marking is 14 Years.  Warning! Not suitable for children under 14 years.

RC servos

KO PDS-2503 SLP, servo, 7.4 V response unit

€43.99

The KO PDS-2503 SLP is a response servo built for RC model setups that call for quick, direct control signals. With a stated response speed of 0.12 at 7.4 V, it brings a technical specification that matters when steering input or throttle actuation needs to register with minimal delay in a 14 Years hobby environment. As a dedicated servo unit, it belongs at the heart of the control system, translating radio commands into mechanical movement inside the model. That makes it a relevant choice for enthusiasts refining handling characteristics, replacing a worn control component, or planning a fresh electronics layout around a defined voltage figure. The supplied data also confirms that batteries are not included, so any wider power setup remains dependent on the surrounding RC installation rather than on this single component alone. In workshop use, the KO PDS-2503 SLP fits projects where response speed and voltage compatibility are key selection points before the first run. It also suits upgrade work on existing RC models, where a clearly specified servo can help shape a more exact control feel during setup and driving sessions.  Warning! Not suitable for children under 14 years.

RC servos

KO PDS-2513 SLP/MG Servo, RC servo unit

€62.99

The KO PDS-2513 SLP/MG servo adds a defined control component to RC model setups, with a stated 9.6 V rating and a response speed of 0.13. In a chassis where steering or throttle inputs need a dedicated electronics unit, that combination gives model-building enthusiasts a clear technical basis for planning a replacement or a fresh installation. As part of the Models & Accessories range, this servo sits in the electronics side of an RC build rather than the body or drivetrain. The KO PDS-2513 SLP/MG designation helps identify the unit accurately when matching parts within an existing setup. The supplied product data also confirms an EU declaration of conformity for this servo, with references to 2014/30/EU, 2011/65/EU and 1907/2006, plus the harmonised standards EN55014-1:2021 and EN55014-2:2021. That gives the component a documented compliance basis alongside its stated electrical specification. On the bench, the servo fits naturally into repair work, electronics upgrades or a planned RC build that needs a named control unit rather than a generic placeholder. It also suits spare-parts storage where exact model identification matters before installation in a compatible RC system.  Warning! Not suitable for children under 14 years.

RC servos

KO PDS-2516 SLP/MG, Power Servo, RC servo

€62.99

The KO PDS-2516 SLP/MG Power Servo is an RC servo component aimed at model-building enthusiasts who want a clearly identified electronics part for a fresh build, a workshop replacement or a tuning project. Its designation combines the KO PDS-2516 SLP/MG name with the technical references 10.8 and 0.16, giving the servo a distinct place in parts searches and component matching. Within an RC setup, a servo converts control signals into mechanical movement, making it a central link between radio commands and the steering or throttle function of the model. That makes the exact designation especially relevant when an existing setup calls for a specific servo format rather than a generic substitute. The data also confirms that batteries are not included. An EU declaration of conformity is documented for this electronic component, with conformity references to 2014/30/EU, 2011/65/EU and 1907/2006, plus EN55014-1:2021 and EN55014-2:2021. This servo fits naturally into workshop benches, rebuild sessions and electronics upgrades where the right named component keeps a project moving without guesswork. For hobbyists comparing replacement parts, the KO PDS-2516 SLP/MG designation provides a concrete reference point when matching an RC model's installed control hardware.  Warning! Not suitable for children under 14 years.

RC servos

KO RSx4S-one10X, servo, low profile metal gear

€124.99

The KO RSx4S-one10X brings a low-profile servo layout and metal-gear construction into a compact steering component for RC model setups. With its stated 11.8 V specification and 0.10-second transit figure, it is positioned for fast, direct response in electronics packages that call for a space-saving servo format. Its low-profile housing suits chassis arrangements where vertical clearance is limited and a compact installation matters for the overall build. The metal gear train gives the steering mechanism a defined mechanical path from servo output to linkage, which supports consistent input transfer under repeated direction changes. The designation in the source data identifies this as a servo rather than a complete vehicle, so the focus stays on steering performance and integration into a compatible RC platform. No batteries are included. In use, this kind of component fits competition-oriented touring car and one10 model projects where quick steering correction and tidy packaging are part of the setup brief. It also suits rebuilds and electronics upgrades that call for a low-profile servo with a high-voltage specification and a fast stated response figure.  Warning! Not suitable for children under 14 years.

RC servos

KO RSx4S-Power H.C, servo, 1:8 RC model

€174.99

The KO RSx4S-Power H.C brings competition-focused servo hardware into 1:8 RC model setups with a stated 26.3 torque figure and 0.13 second speed. In the standard STD/MG format, it is aimed at hobbyists who tune steering response with the same care as chassis balance and drivetrain setup. Its specification points clearly toward demanding RC use: the 4S-ready design suits higher-performance electronics layouts, while the metal gear construction focuses on direct power transfer inside the servo case. The combination of speed and torque supports fast steering corrections through technical sections, tighter line placement in corners, and more consistent response when track grip changes. Because the data identifies this unit as a servo rather than a complete vehicle, it fits naturally into custom builds, race maintenance, and targeted replacement work where a defined control component is needed. Batteries are not included. On the bench, the KO RSx4S-Power H.C suits builders comparing servo characteristics for a 1:8 buggy, truggy, or other RC model in that scale class. At the track, the stated figures support setups where quick input transfer and firm steering authority shape how the model reacts lap after lap.  Warning! Not suitable for children under 14 years.

RC servos

KO Servo Model Selector, servo accessory

€18.59

The KO Servo Model Selector for 4S BS/RSx4S adds a dedicated control accessory to the electronics side of an RC setup, giving model-building enthusiasts a focused way to work with compatible servo configurations. Built around KO 4S BS and RSx4S compatibility, it fits naturally into bench preparation before a chassis heads to the track. Instead of changing hardware across different builds, this selector is made to support model-specific servo selection within the stated KO system. That makes it a useful addition when several RC models share the same electronics platform but call for different setup choices. The compact accessory role also keeps the emphasis on tuning and configuration rather than on major component swaps. Minimum age is 14 Years. Batteries are not included. On the workbench, the selector suits organised setup sessions where electronics are matched to a fresh build or adjusted between running days. It also fits trackside preparation, where a compatible servo system can be configured with a more deliberate, model-led approach before driving begins.  Warning! Not suitable for children under 14 years.

RC remote controls

KO Trigger Pad Set, model accessory

€10.59

The KO Trigger Pad set is a model accessory from the Carson Modelsport range, listed with the exact designation used in the product data. With an assembly time unit in minutes, a voltage unit in volt, a maximum speed unit in km/h and a maximum operating time unit in minutes present in the data structure, the available verified detail for this entry remains focused on the accessory name itself rather than on technical fitment or performance figures. That makes the strongest, most reliable description a precise one: KO Trigger Pad set identifies a specific spare or replacement component for model-related equipment, and it belongs in a parts selection built around exact naming. The data confirms that batteries are not included and gives an age marking of 14 Years. No further verified information is provided here on compatibility, dimensions, material composition, included quantity, or supported systems, so those points are left unstated rather than guessed. Within a hobby bench, workshop drawer or model maintenance setup, an exactly named accessory set helps keep existing equipment in service and supports targeted parts searches when a matching component is needed. The entry is therefore written around the confirmed designation and the clearly stated 14 Years age marking, without inventing fitment details that the data does not supply.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

KR-242XT 2.4GHz, receiver, 4-channel

€74.99

The KR-242XT 2.4GHz receiver brings a compact 4-channel control unit into RC model setups where clean signal transmission and dependable channel allocation matter. With 4 channels available, the receiver supports core driving functions such as steering and throttle while leaving room for additional switching tasks in more detailed electronics layouts. Its KO 4CH Receiver KR-242XT 2.4GHz designation places it clearly as a dedicated radio component rather than a general accessory, which helps when planning a compatible control system around separate onboard electronics. The 2.4GHz frequency is the standard basis for modern RC operation, suited to model installations that need stable wireless communication in a compact format. The data states that batteries are not included. Minimum age 14 years is specified for this receiver. An EU declaration of conformity is provided for the unit, with cited standards including EN 301 489-1 V2.2.3, EN 301 489-3 V2.3.2, EN 300 440 V2.2.1, EN 55014-1:2021, EN 55014-2:2021 and EN 62479:2010. This receiver fits naturally into hobby workbench sessions focused on configuring RC electronics and refining a vehicle's control layout. It also suits replacement or upgrade use in model projects where a 4-channel 2.4GHz unit is the required basis for the radio system.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

KR-420XT 2.4GHz, receiver, 4-channel unit

€119.99

The KR-420XT 2.4GHz receiver brings 4-channel control into RC model setups with a compact electronics unit built for organised signal handling. In a chassis, boat hull or other hobby installation, the receiver forms the link between transmitter commands and the connected control functions, keeping the layout focused on the essentials of steering, throttle and added channel tasks. As an RC electronics component rather than a ready-to-run vehicle, this unit suits projects where the radio system is chosen part by part. The 2.4GHz specification places it in the current standard for model control, while the 4-channel format opens room for more than the basic drive inputs alone. That can support switching functions, auxiliary movements or other channel-based actions when the wider setup is matched accordingly. The product data also states a minimum age of 14 years and confirms EU declaration of conformity documentation for the receiver. In practical use, the KR-420XT fits workshop builds, replacement installs and electronics upgrades where an existing RC model needs a compatible receiving unit. It also suits fresh hobby projects that start with the radio layout first and are then completed around the selected control system.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

RA 3Ch Reflex Stick Pro 4, remote control, 2.4GHz

€49.99

The RA 3Ch Reflex Stick Pro 4 brings 2.4GHz radio control together with a classic stick layout for model driving that calls for direct, proportional input. With 3 channels and 2 continuously adjustable, fully proportional control paths, steering and throttle commands can be metered with fine control, while channel 3 is switched in 2 positions for a clear auxiliary function. Channel 1 includes dual rate to adjust servo travel, which helps match the steering response to different model setups. Servo reverse changes the direction of movement for the channels when the installation requires it, and the trim function for channels 1-2 supports accurate neutral settings. The transmitter operates at 4.8-6 V with 4 AA cells, and the receiver power supply allows up to 11 V without BEC. The connector system uses Futaba/Graupner J/R, giving the set a clear interface for compatible RC components. The set includes the 3-channel remote control, a 4-channel receiver and a manual. An LED battery status indicator keeps the transmitter charge level in view during running sessions, while the failsafe system provides a defined response if the radio link is lost. Age 14 Years+  Warning! Not suitable for children under 14 years.

Remote-controlled systems

RA 4Ch Reflex Stick Pro 4, remote control, 2.4GHz

€64.99

The RA 4Ch Reflex Stick Pro 4 2.4GHz LCD brings 4-channel control and detailed setup functions into one radio system for model driving from age 14 years. Its LCD layout supports direct access to key settings, while 15 model memory slots keep multiple vehicle configurations stored and ready for use. Two fully proportional channels allow continuously adjustable steering and throttle input, and 2 additional switch channels handle special functions on compatible models. Channels 1 and 2 can be tuned with servo reverse, trim, dual rate, EPA and EXP, giving clear control over direction, centre position, servo travel limits and response curve. The integrated failsafe system adds a concrete control safeguard for supported setups. The transmitter operates at 4.8 to 6 V with 4 AA cells, and the connector system uses Graupner J/R. A 4-channel receiver is included, so the system can move straight into installation on a suitable model. The receiver power supply supports up to 11 V without BEC, which suits a wide range of hobby configurations. This combination fits model-building enthusiasts who want one radio system for several vehicles, special functions and fine setup work at the bench or track.  Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Pro 3 Electric Set, RC radio system

€124.99

The RC-Reflex Pro 3 Electric Set brings the core electronics for an RC ground model into one coordinated package. A 2-channel 2.4 GHz transmitter works with a 4-channel mini receiver to handle steering and throttle commands, while the pistol-grip layout supports one-handed control with a trigger and side wheel format familiar in car-based RC setups. Alongside the radio link, the set includes a CS-6 steering servo for installation in a compatible model and a 7.2 V 3000 mAh drive battery for the vehicle itself. The Expert Charger is part of the set, and 4 AA transmitter batteries are also included for the handset. This combination suits fresh builds, replacement electronics, or an upgrade from older radio gear where the main control components need to be assembled in one step. With 2 frequency channels and 16 listed parts, the set covers the central functions needed to equip a model for radio-controlled driving. In use, the electronics set fits naturally into workshop preparation before a chassis goes to the track, car park or garden path. The included components support installation, charging and control in a format aimed at hobby-focused RC driving, whether for a first compatible setup or as a practical replacement package for an existing model.  Warning! Not suitable for children under 14 years.

RC remote controls

REFLEX STICK PRO 3.1, radio set, 2.4GHz

The REFLEX STICK PRO 3.1 Elektro Set brings the core electronics for an RC model into one coordinated package, centred on a 2-channel 2.4GHz radio system with fully proportional control. Steering and throttle inputs respond progressively rather than in fixed steps, which supports cleaner line control on the track, at the workbench, or during first setup runs. The transmitter operates on 4.8-6V and uses a stick layout familiar across many hobby-grade applications. Beyond the radio itself, the set combines a 2.4G receiver, a CS3 servo, a 7.2V 2500mAh racing pack, a USB charger with 7.2V 250mAh output, and 4 AA Ansmann batteries. Servo reverse is available on both channels, so steering or throttle direction can be corrected directly at the transmitter when the installed linkage runs opposite to the intended movement. The steering and throttle trim functions help dial in neutral position and straight tracking, while dual rate on the steering channel allows reduced or expanded steering travel depending on the model's response. A charging socket with positive pole inside and an LED battery charge status indicator add clear handling details during use. The plug system is compatible with Futaba and Graupner JR, which broadens integration across common RC installations. In a touring car, buggy, boat, or similar hobby build, the set covers the key radio and power components needed to move from installation to controlled running with matched electronics.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex Stick Pro 4 WP Receiver, RC receiver

€51.99

Functional RC models often depend on more than steering and throttle alone, and this 15-channel receiver is built for that broader control layout. Operating in the 2.4 GHz frequency range, the Reflex Stick Pro 4 WP receiver is designed as a replacement unit for compatible Carson radio systems while keeping the electronics package compact at 52 x 32 x 13 mm. The 15 available channels create room for models that use several separately controlled functions, such as truck equipment or specialty vehicle features that need their own signal paths. Its 15 g weight helps when chassis space is already shared with servos, linkages and wiring, because the receiver can be integrated without taking over the layout. The compact format also suits installations where bodywork, interior parts or scale details leave little free room around the radio compartment. Compatibility is stated for the Carson FS 14K Reflex Stick Pro 4, FS 14K Reflex Stick Pro 4 LCD and FS 15K Reflex Stick 4 Pro LCD-MFC 2.4 GHz remote controls. In workshop use, it fits as a direct replacement when an existing radio setup needs the same control architecture again. In running sessions with function-heavy RC trucks or specialist builds, the 2.4 GHz system supports stable command transfer across the model's multiple control tasks.

RC remote controls

REFLEX XS 2.4GHz Transmitter, RC controller

€25.99

The REFLEX XS 2.4GHz transmitter brings classic wheel-style RC control to compatible XS-Chassis models with a compact pistol-grip format, a side steering wheel and a trigger for throttle and brake input. The black and dark grey housing keeps the layout focused, while the 2.4GHz system suits interference-conscious driving sessions where clean radio control matters. Its control concept follows the familiar car transmitter arrangement: the foam-covered wheel handles steering input, and the trigger manages acceleration and braking through one hand position. Visible setup markings such as REV, ST, TH and D/R point to onboard adjustment functions that support model-specific tuning rather than a fixed one-setting layout. The top section also carries additional adjustment points, giving hobby users direct access to setup changes on the transmitter body. This transmitter is intended for CARSON XS-Chassis references 500404360, 500404361, 500404362, 500404363, 500404252, 500404253, 500404254 and 500404255. The 14 Years age marking is stated in the product data. In the workshop, at the track or on a casual driving surface, the wheel-and-trigger format keeps steering and speed control close together for responsive handling on compatible RC vehicles.

RC servos

Servo CS-9, RC servo, waterproof metal gear

€22.99

The CS-9 brings regular-size servo control to model builds that need quick response, a waterproof housing and a straightforward JR connection. Its black and blue case, top output shaft and 3-wire lead suit a wide range of RC installations where compact control hardware needs to translate radio commands into clean mechanical movement. Inside the housing, the metal gear transmission is built for repeated steering or control inputs, while the 9 kg rating and 0.1 speed support fast actuation in demanding hobby setups. The included servo horns expand the mounting options at the spline: a single-arm horn and a 4-arm cross horn provide different linkage positions, and the set also includes rubber grommets and a mounting screw for installation. The regular-size format makes the servo a useful choice across different model categories where a standard servo bay is part of the layout. Age 14 Years is stated for this servo. In RC cars, the CS-9 can handle steering duties where quick centring and firm linkage control matter through corners and surface changes. In boats, aircraft or robotics projects, the same servo format supports control surfaces or moving functions that rely on compact dimensions, a JR plug and waterproof construction.  Warning! Not suitable for children under 14 years.

RC servos

XS Chassis Servo for RC Models 15 kg

€21.99

The XS Chassis 15 kg servo brings a defined control component to RC model builds where compact installation and solid actuating force matter. With its XS chassis designation and 15 kg rating, it suits layouts that need a servo sized for tighter chassis architecture while still delivering clear mechanical input through the steering or control linkage. Within an RC setup, the servo converts radio commands into physical movement at the chassis, making it a central part of how steering or other linked functions respond in use. The data identifies it as a servo for the XS chassis range, placing it in the core hardware area of model maintenance, replacement and tuning rather than in decorative accessories. This makes it relevant for rebuilds, repairs and planned upgrades where a defined force rating is part of the selection process. Batteries are not included. On the bench, the servo suits projects that call for a compact control unit matched to model hardware in the Models & Accessories field. It also fits routine spare-parts planning for RC collections where a dedicated chassis servo keeps running models ready for the next session.

RC servos

XS Steering Servo CS-3.5, RC servo, 3.5 kg

€14.99

The XS Steering Servo CS-3.5 is a dedicated steering component for CARSON 1:10 XS-Chassis vehicles, built to bring controlled front-wheel movement to the Stadium Fighter and Offroad Fighter Cage models listed for compatibility. Its compact servo format, black housing and top output shaft suit the tight installation space typical of hobby-grade RC chassis. The unit is specified as a 5-pin steering servo with 3.5 kg actuation force, giving the steering linkage the mechanical input needed to turn the wheels through the radio system. Side mounting tabs support fixed installation in the chassis, while the pre-attached lead and connector simplify integration with the matching electronics layout. Compatibility is stated for CARSON XS-Chassis 500404252 Stadium Fighter blue, 500404253 Stadium Fighter orange, 500404254 Offroad Fighter Cage turquoise and 500404255 Offroad Fighter Cage red. Age marking: 14 years+ In the workshop, the servo fits naturally into repair jobs, routine maintenance and spare-parts storage for running fleets based on the XS-Chassis platform. It suits hobby benches focused on keeping 1:10 RC vehicles ready for steering service with the correct dedicated replacement part.

RC remote controls

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€109.99

The Reflex Wheel Pro 4 electric set brings wheel-style RC control, core onboard electronics and matched power components together in one package for 2.4 GHz model operation. With a 3-channel transmitter, a 4-channel mini receiver, a 6 kg CS6 servo and a 7.2 V 3000 mAh NiMH drive battery, the set covers the central functions needed to equip an electric RC vehicle for hobby use. The transmitter runs on 3.6 to 4.5 V and uses an ergonomically angled 4° steering wheel position for a natural hand layout during longer driving sessions. Channel 3 can be programmed as a switch or button function for a servo, adding another control option beyond steering and throttle. The receiver power supply supports 3.5 to 10 V without a BEC, and the nano receiver is waterproof for installation in models exposed to wet running conditions. A ball-bearing control unit supports precise steering input, while the LED battery status display keeps the charge state visible during setup and use. The included charger is designed for NiMH packs with 4 to 8 cells and delivers up to 2 A output power. Uni connector system compatibility for Futaba and Graupner-J/R broadens integration with existing RC equipment, making the set a strong base for electric model builds, upgrades and replacement radio installations. Age 14+  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex Wheel Pro 4 WP Receiver, RC 4-Channel

€29.99

The Reflex Wheel Pro 4 WP is a compact 2.4 GHz 4-channel receiver built for RC models that need dependable control hardware in a small format. With a 35 x 30 x 13 mm housing and a weight of about 11 g, it suits installations where available chassis space is tight and electronics placement matters. The 4.8-8.4 V power range supports integration into common RC vehicle electrical setups, while the clearly arranged channel ports keep the connection points easy to identify during installation. The receiver layout provides connections for CH1, CH2, CH3 and AUX, giving model builders a practical basis for steering, throttle and added functions within one compact unit. An external antenna wire extends from the housing for radio reception, and the included plug supports binding or setup functions as shown in the supplied configuration hardware. The 2.4 GHz system suits modern RC control environments where clean component organisation and straightforward wiring are part of a well-planned build. In workshop use, the small footprint helps when fitting electronics into narrow radio boxes or compact interior layouts. For replacement, upgrade or fresh model projects, this receiver adds a focused control component that can be integrated without taking over the chassis layout. The age marking is 14 years and over.

RC remote controls

RA 3Ch Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€59.99

The RA 3Ch Reflex Wheel Pro 4 brings 2.4 GHz control, a 4-channel mini receiver and a 5 kg CS5 servo into one radio set built for RC model driving with direct, adjustable command at the wheel. With a pistol-grip transmitter, side steering wheel and trigger throttle, the layout follows the handling style widely used in ground vehicles and keeps key functions close at hand. Channels 1 and 2 work fully proportionally, so steering and throttle inputs can be fed in smoothly rather than only in fixed steps. Servo reverse for both channels changes the direction of travel response when a model needs the opposite movement, and separate trim for throttle and steering helps straighten running behaviour without mechanical changes. Dual rate on both channels limits servo travel and can reduce speed response, which is useful when matching control sensitivity to different chassis layouts. Channel 3 is programmable as a switch or button function, adding another control option for compatible RC installations. The receiver accepts a power supply up to 6 V without a BEC and uses a Uni connector system for Futaba and Graupner-J/R compatibility. A waterproof nano receiver format suits compact installations, while the LED battery status display gives a clear visual check on transmitter power. The set includes the transmitter, 4-channel mini receiver, 5 kg CS5 servo and instructions. 4 AA batteries are required separately.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Receiver Reflex Wheel PRO 3, RC receiver, 2.4 GHz

€22.99

The Receiver Reflex Wheel PRO 3 2.4 GHz is built as a dedicated replacement receiver for the Carson Reflex Wheel PRO 3 RC system, bringing a compact 4-channel layout into compatible model vehicle electronics. Its dark housing measures 35 x 25 x 10 mm, making it easier to place the unit in confined radio boxes or chassis compartments where space is limited. The connector side is arranged with clearly printed CH1, CH2, CH3 and CH4 markings, so steering, throttle and extra control functions can be assigned in a straightforward layout. A 2.4 GHz operating frequency supports modern radio control use, while the 6 to 11 V input voltage range matches common RC system requirements for this class of receiver. The F/S Set function adds a defined failsafe setting, allowing a stored control position when signal is interrupted. As a replacement component, it suits repairs, maintenance work and the return of an existing Reflex Wheel PRO 3 setup to running condition. In workshop use, the compact format helps when replacing a receiver in a crowded chassis with limited installation room. On the bench or at the track, the 4-channel configuration supports model vehicles that need dependable control routing for core driving functions and added features.

RC servos

Servo CS-13, RC servo, 13 kg waterproof

€25.99

The Servo CS-13 brings regular-size dimensions, 13 kg torque and a waterproof design into one compact control component for RC models. Its 4.8-6 V operating range and JR connector suit common hobby electronics layouts, while the output shaft works with the included servo horns to transfer movement into steering, throttle or brake linkages. Inside the housing, metal gears handle the servo's drive path and support consistent motion under load. The set includes a cross horn, a single-arm horn, rubber grommets and a mounting screw, so different linkage positions and installation layouts can be matched to the model's setup. The 3-wire lead connects the servo to the control system, and the regular-size format suits many model applications where a standard servo footprint is required. The waterproof construction expands its use to builds that face wet ground or damp running conditions. In an RC car, the CS-13 can be installed for steering input or throttle and brake control, depending on the model layout. It also fits other hobby applications that use mechanical linkages and a JR plug connection, making it a practical choice for repairs, upgrades or fresh builds from age 14 years.  Warning! Not suitable for children under 14 years.

RC servos

CS-5 Servo 5kg/JR, servo, 50 Ncm control

€11.99

The CS-5 Servo 5kg/JR brings controlled movement to RC installations with 50 Ncm torque, 0.17 sec/60° transit speed and a regular-size format that fits a wide range of model sport layouts. In a steering system, throttle linkage or another actuated function, the servo converts receiver commands into precise shaft movement through its Graupner/JR connector setup and 4.8-6 V operating range. Its housing measures 38.5 x 19 x 32 mm and weighs 39 g, which helps when planning installations in tighter chassis sections or compact equipment bays. The side mounting tabs allow the servo to be fixed into the model structure, while the output shaft accepts servo horns for linkage connection and throw setup. This makes the unit suitable wherever a model needs repeatable control input rather than free-running drive power. The electrical specification also makes it a practical match for common RC receiver-powered systems that work within the stated voltage window. In use, the CS-5 can take on steering duties in an RC car, move a control surface in another model format, or operate a mechanical linkage where measured travel and response time matter. The combination of regular-size dimensions, JR connection standard and clearly stated performance data gives hobby builds a solid basis for selecting the right control component.  Warning! Not suitable for children under 14 years.

RC remote controls

RA 4Ch Reflex Wheel Pro 4, RC transmitter

€59.99

The RA 4Ch Reflex Wheel Pro 4 2.4GHz LCD brings a compact pistol-grip layout, 4-channel control and a clear display into one radio system for RC driving with precise steering and throttle input. Its angled 4° steering wheel position, ball-bearing control unit and carbon structure shape a focused handling feel at the transmitter itself while the blue-lit LCD keeps setup values readable at a glance. Two channels work fully proportionally for finely graded control, while channel 3 can be programmed as a switch or button function and channel 4 uses a 3-level switch. The transmitter operates at 3.6-4.5 V, and the receiver accepts 3.5-10 V without a BEC, which broadens the range of compatible model installations. A failsafe function adds a concrete control safeguard if signal is lost. The system also stores settings for up to 15 models, which helps keep separate configurations ready for different vehicles instead of resetting trim and response values each time. Included are the 4-channel 2.4 GHz transmitter, a 4-channel mini receiver and instructions. 4.8-6 V operation and the compact receiver format suit hobby setups where steering, throttle and auxiliary functions need one coordinated radio system for track driving, car park sessions or workshop tuning between runs.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Receiver Reflex Stick Pro LCD, RC receiver

€54.99

The Receiver Reflex Stick Pro LCD is a compact 2.4 GHz replacement receiver for the Reflex Stick Multi Pro LCD RC system, built to restore full radio control in compatible model setups. With 14 channels in one unit, it provides broad connection capacity for steering, throttle and additional switched or proportional functions in more complex vehicle or model configurations. Its 35 x 26 x 14 mm format helps the receiver fit into installations where electronics space is limited, while the 4.8 to 6 V input range matches common RC system voltages. The housing shown with channel ports from CH1 to CH14, a bind area, an F/S set function and LED status indication points to clear handling during setup and system pairing. As a replacement component, it is intended for the Carson Reflex Stick Multi Pro LCD system rather than as a universal receiver claim across unrelated transmitters. In practical use, this receiver suits hobby workbench repairs, electronics replacement in an existing model, or the restoration of a compatible RC setup after a receiver swap. The 14-channel layout leaves room for models that go beyond basic steering and drive functions and need extra control paths for added onboard features.

RC receivers and accessories

Receiver Reflex Wheel Start, RC receiver, 2.4 GHz

€19.99

The Receiver Reflex Wheel Start 2.4 GHz is a dedicated replacement receiver for the Carson Reflex Wheel Start RC system, bringing the radio link back into service with a compact 35 x 30 x 13 mm format and 3-channel control. Its 2.4 GHz transmission setup and slim antenna wire suit model installations where electronics need to sit cleanly inside a tight chassis layout. The receiver is designed for the matching Reflex Wheel Start system and works as the central connection point for steering, throttle and an additional channel. An input voltage range of 4.8-11 V supports integration into common RC vehicle electronics, while the exposed connector bank keeps servo and control leads clearly arranged during installation. The housing also carries an LED indicator area and a switch point for setup functions on the unit itself. This is an electronic accessory for model use rather than a toy, with the technical focus placed on dependable signal handling inside the vehicle. In the workshop, it serves as the right spare part when an existing Reflex Wheel Start setup needs a fresh receiver. Once installed in a compatible RC model, the compact body and straightforward channel layout help keep the onboard electronics organised for regular driving sessions and maintenance work.

RC remote controls

FS 3K Reflex Wheel Pro 4 2,4GHz

€45.99

The Carson RA 3Ch Reflex Wheel Pro 4 2.4GHz (500500110) is an ergonomic 3-channel remote control with 2.4 GHz system, nano receiver and instructions. For model building fans, it offers two infinitely variable proportional channels, programmable channel 3, servo reverse, trim and dual rate functions, LED battery indicator, failsafe, ball bearing steering wheel and operating voltage 3.6-4.5 V. Not for children under 14 years.   Warning! Not suitable for children under 14 years.

Remote-controlled systems

Reflex Wheel Pro 4 Gyro Receiver, 4-channel

€32.99

The Reflex Wheel Pro 4 Gyro receiver brings 4-channel radio control and integrated gyro support together in one compact module for RC model setups. Its black housing carries clearly printed CH1, CH2, CH3 and CH4 markings, making the connection layout easy to read during installation and helping keep each assigned function in order inside the vehicle. The unit is part of the Reflex Series Pro 4 range and includes dedicated Pair and FS markings directly above the connector area. That layout keeps binding and failsafe functions tied closely to the receiver body instead of leaving key setup steps to guesswork. Built-in DEC and INC controls add direct access to adjustment changes on the module itself, which is useful when fine-tuning the gyro response in a workshop setting. The compact rectangular form also suits tighter chassis layouts where electronics need to sit neatly alongside steering and drive components. In practical use, this receiver fits hobby builds that need organised channel assignment and onboard adjustment access in one place. The 14 Years marking identifies the recommended age, while the receiver format suits model-building enthusiasts working on compatible RC vehicles and electronics installations.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex Wheel PRO3 Receiver, RC receiver, 2.4GHz

€24.99

The Reflex Wheel PRO3 receiver brings 2.4 GHz control, 4 channels and a water-resistant design into a compact RC component built for model installations where space and dependable signal handling both matter. As a replacement receiver for the Carson Reflex Wheel PRO3 radio system, it keeps the layout focused with clearly marked CH1, CH2, CH3 and CH4 connections plus a dedicated F/S Set control on the case. Its 35 x 25 x 10 mm dimensions make it easy to position inside many RC chassis, while the 6 to 11 V input range suits common onboard electronics. The labelled connector side helps keep steering servo, throttle control and further channel functions clearly assigned during installation. A visible antenna lead extends from the housing for radio reception, and the marked switch area adds direct access on the unit itself. The receiver is intended for the Reflex Wheel PRO3 system, making it a straightforward replacement when an existing setup needs a matching 4-channel unit. In use, the compact format suits touring cars, buggies, crawlers and other radio-controlled models where electronics space is limited. The water-resistant build and failsafe setting support controlled running in changing track and outdoor conditions, from workshop rebuilds to regular driving sessions.

RC servos

CS-5 Servo 5kg/JR, servo, regular size

€14.99

The CS-5 Servo 5kg/JR brings regular-size servo control to RC model setups with 50 Ncm torque, a 4.8-6 V operating range and a Graupner/JR connector-system. Its compact 38.5 x 19 x 32 mm format and 39 g weight make it a practical choice for installations where the servo has to fit neatly alongside the rest of the radio equipment. The 0.17 sec/60° transit speed gives the output shaft a quick response when steering geometry or throttle linkage needs direct movement. The regular-size format suits many common model layouts, and the connector-system supports integration with electronics built around the Graupner/JR standard. The servo housing includes mounting tabs for fixed installation in the chassis or radio tray, while the splined output shaft accepts servo horns for linkage connection. Age 14 Years is stated for this model component. In use, the CS-5 fits projects where reliable actuation is needed for steering, throttle or other control functions in model builds. It also suits replacement work when an existing setup calls for a regular-size servo with Graupner/JR connection and clearly defined speed, voltage and torque figures.  Warning! Not suitable for children under 14 years.

RC servos

CS-6 Servo, RC servo, 6 kg metal gear

€18.99

The CS-6 Servo brings controlled movement to RC steering and throttle functions with a regular-size format, 6 kg force and a 0.2-second response. Its blue and black housing, top output spline and JR plug layout make it a focused choice for model sport builds that need a compact actuator with clear, direct linkage control. Inside the housing, metal gears transfer the servo movement to the output shaft, supporting precise actuation where repeated steering corrections or throttle inputs matter. The 3-wire connector lead links the unit to compatible receiver systems, while the side mounting tabs with screw holes allow fixed installation in a chassis or frame. The supplied horn set includes a single-arm horn and a 4-arm cross horn, each with multiple mounting holes for different linkage positions and throw adjustment. Rubber grommets and the mounting screw complete the core fitting hardware shown for installation. In an RC car, boat or other model using linkage-driven motion, the CS-6 can be assigned to steering, throttle or another control task that needs measured rotational travel. Age marking: 14 Years.

RC remote controls

RC-Reflex Pro 3, electric set, 2.4 GHz RC

€124.99

The RC-Reflex Pro 3 Electric Set brings together the core electronics needed to equip ARR and assembly kit models for the track or the water. Built around a 2.4 GHz radio system, the set suits RC cars and boats and combines control hardware, charging equipment and NiMH power components in one coordinated package. The transmitter works with an operating voltage of 4.8 to 6 V and pairs with a 4-channel receiver. Two continuously controllable fully proportional channels handle steering and throttle inputs with direct response. Servo reverse is available on both channels, while trimming functions for accelerator and steering help align the model accurately. Dual rate on both channels limits servo travel when a calmer steering setup is needed. The integrated fail-safe adds a concrete control function for signal loss situations, and the plug system supports Futaba and Graupner-J/R connections. A charging socket with plus terminal inside is built into the system. Power supply is covered by a 7.2 V 3000 mAh NiMH driving battery with TAMIYA plug and 4 NiMH Mignon 1.2 V 2100 mAh transmitter batteries. The included 2-in-1 charger works from 100-240 V, 50-60 Hz AC and provides max. 2 A at 9 V on output 1 and max. 0.5 A at 6 V on output 2. With the CS-6 steering servo, receiver, charger and battery set included, this electric package fits hobby setups that need a complete radio and power foundation for Tamiya-compatible models. Age 14 Years  Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Start Electric Set, RC set, 1:10

€69.99

Built for 1:10 TAMIYA RC kits, the RC-Reflex Start Electric Set brings the key electronics for vehicle operation into one coordinated package. The set combines a compact 3-channel 2.4 GHz transmitter with matching receiver, a CS-3 steering servo, a 7.2 V 2500 mAh NiMH driving battery, a USB charger and 4 x AAA transmitter batteries, creating a clear starting point for hobby builds that still leaves room for precise setup work. The pistol-grip transmitter uses a wheel-style steering control and trigger throttle layout that suits RC car handling, while 2 fully proportional channels respond gradually rather than in fixed steps. Trim functions for accelerator and steering help correct running behaviour, and the servo reverse function allows the steering direction to be switched when the installation calls for it. A fail safe system adds a concrete control safeguard, and an LED battery status display keeps the charge state visible during operation. The included 3-channel receiver provides the matching vehicle-side link for the 2.4 GHz system. For workshop bench setup, club track preparation or the first runs after a fresh kit build, the set covers the central radio and power components in one box. The 14 Years marking fits the hobby-oriented character of the set, especially where model builders want a straightforward electronics package for getting a 1:10 chassis ready for driving.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel Start, radio control, 2.4 GHz

€34.99

The Reflex Wheel Start brings classic wheel-style RC control into a compact 2.4 GHz system with a black pistol-grip transmitter and matching 3-channel mini-receiver. A large side steering wheel and trigger layout create the familiar handling used in many RC car setups, while the wireless link supports clean installation in compatible models. Two fully proportional channels allow gradual steering and throttle input instead of simple on or off commands. Servo reverse changes the travel direction when a steering or throttle servo moves the wrong way after installation, and the trim functions for both gas and steering help centre the model accurately. Dual rate on both channels makes it possible to limit servo travel, which is useful when a setup needs reduced steering throw or a calmer response. The transmitter operates on 4.8 to 6 V, and receiver powering without BEC is possible up to 11 V. The Uni connector system supports Futaba and Graupner-J/R layouts, adding flexibility for different hobby setups. An LED battery status display keeps the transmitter power level in view during driving sessions or bench setup. The integrated failsafe adds a concrete control feature for RC use, and the included transmitter with mini-receiver forms a practical entry point for 14 years and up.  Warning! Not suitable for children under 14 years.

RC servos

Servo CS-6, RC servo, low profile waterproof

€26.99

The Servo CS-6 brings compact low-profile dimensions, waterproof construction and 6 kg control force into one RC servo for space-conscious model layouts. Its metal gear transmission and JR connector suit steering and linkage duties where a clean fit and dependable response matter across changing track conditions. The low-profile housing helps when radio trays, chassis decks or body clearances leave little vertical room, while the stated 4.8-6 Volt operating range supports use across common RC electrical setups. A speed figure of 0.16 adds a concrete reference for the servo's response in steering or control applications. Included components cover the servo itself, a JR connector and a servo horn set, so the mounting and linkage side starts with the core parts already in hand. The horn set adds different connection points for setting linkage position and travel, and the metal output train keeps the transfer from servo shaft to steering system mechanically focused. In touring cars, drift builds, boats or other compact RC models, the CS-6 fits where standard-height servos can become awkward to place. Wet grass, puddles, damp pit areas or splash-prone running sessions make practical use of the waterproof design, while the 14 years marking places it within the hobby-focused end of the range.  Warning! Not suitable for children under 14 years.

Additional spares

Alu Servo Horn 27mm, servo accessory, 25T

€7.29

A servo horn is one of the small parts that defines how accurately a model responds, and this aluminium version combines a 27 mm lever length with a 25T spline profile for compatible Carson and FUT servo setups. The dark grey metal finish and compact one-arm layout give the part a clean technical look on the bench and in the chassis. The cylindrical hub uses internal splines to seat on the servo output shaft, where it transfers movement directly into the linkage. Along the arm, 4 evenly spaced holes provide different attachment points, allowing the linkage position to be matched to the required steering or throttle geometry. That hole spacing supports fine setup work during maintenance, replacement or tuning, especially when a worn standard arm is being swapped for a metal alternative. The single-arm format also keeps the function clear in compact RC assemblies where linkage routing matters. In workshop use, this servo accessory fits naturally into rebuilds, repairs and parts storage for model enthusiasts aged 14 years and up. It suits projects that call for a 25T connection and a defined 27 mm reach, whether the goal is restoring a running model or refining the response of an existing linkage layout.

RC receivers and accessories

Battery Box, RC accessory, receiver battery mount

€3.79

Glow-engine RC cars often rely on a separate receiver power supply, and this Battery box is made for exactly that task. As a receiver battery mount with attached connection cable, it creates a direct link between the battery compartment and the onboard electronics in compatible RC setups. The housing shown in the product data is built for 2 cylindrical AA cells and uses internal spring contacts at each end of the compartment. Molded + and - markings inside the tray guide battery orientation, while the red and black leads run out to a compact 2-pin connector for straightforward integration into the vehicle's receiver power circuit. That makes this accessory useful both as a replacement part for an existing model and as a practical spare kept in the workshop for maintenance or rebuilds. Batteries are not included. In use, the battery box fits the kind of setup where a glow-engine model separates receiver power from the engine system, helping keep the radio functions supplied during running sessions. It also works well as a service part when worn battery holders, tired contacts or damaged leads need to be swapped out in a compatible RC car.  Warning! Not suitable for children under 14 years.

RC servos

CS-9 Servo 9kg/JR, RC servo, regular size

€22.99

The CS-9 Servo 9kg/JR brings regular-size servo control to RC builds that need a compact drive unit with direct mechanical output. With 9 kg torque, a JR connector and a 3-wire lead, it fits into many model setups where steering, throttle or other moving functions are controlled through a servo arm and linkage. The rectangular housing carries mounting tabs for screw fixing, and the splined output shaft accepts different horn layouts for varied linkage geometry. A single-arm horn and a 4-arm cross horn are shown, each with multiple mounting holes that allow different attachment points for rods and control linkages. Rubber grommets sit in the mounting points to isolate the servo during installation, and the central fixing screw secures the horn on the output shaft. The short description states a 0.2 s speed rating and MG specification, adding a concrete performance figure and metal gear construction for hobby applications. In an RC car, the servo can translate steering input into wheel movement through the horn and linkage. In boats, aircraft or other model mechanisms, the same output layout supports controlled motion wherever a compact rotary actuator is needed. The 14 Years age marking places the CS-9 in the hobby category for model-building enthusiasts and RC setups.  Warning! Not suitable for children under 14 years.

RC remote controls

MC-8 2.4GHz MX-F TR set, RC radio system

€104.99

The MC-8 2.4GHz MX-F TR set brings game-controller handling to an 8-channel RC radio system, combining the transmitter with the MR-8 micro receiver for compact installation in demanding model layouts. With the receiver measuring 27 x 28 x 15 mm, the set suits builds where available space matters as much as dependable multi-channel control. Its control layout goes beyond basic steering and throttle. The left and right 3D joysticks each include a push-button function, opening extra input options for assigned model functions. A Uni/Fut. connector system supports integration with compatible equipment, and the set is specified for use with TAMIYA MFC-01, MFC-02 and MFC-03 as well as DMD/MF units. The 2.4 GHz transmission standard supports modern radio operation for hobby models that need several functions managed from one handset. In workshop setups, scale trucks and function-rich RC builds can benefit from the extra channels for lighting, sound or special movements where the connected system supports them. 4 AAA batteries are required separately for operation, making the set ready to slot into existing hobby equipment with a straightforward power requirement.

RC receivers and accessories

Receiver Reflex Stick 2, RC receiver, 2.4 GHz

€42.99

The Reflex Stick 2 receiver brings the core control link of the matching Carson RC system into a compact 45 x 28 x 13 mm format. Designed as a replacement receiver for the Reflex Stick 2 radio system, it combines 6 channels, 2.4 GHz transmission and a clearly arranged connector layout for RC vehicle electronics. The housing carries labelled connections for battery input and channels CH1 through CH6, so the installation points are easy to identify when fitting the unit into a model. An input voltage range of 4.8 to 6 V matches the specified operating window for the receiver and supports integration into the intended radio setup. A setup button is placed directly on the unit, while the LED indicator provides visible status feedback during binding and configuration. This keeps the handling focused on the receiver itself rather than on external programming hardware. In workshop use, the receiver suits repairs, replacement of a damaged unit or the restoration of a Reflex Stick 2 control system to working order. Inside an RC vehicle, the compact footprint helps when space is limited and several connected functions need a clean channel layout. Age marking: 14 years.

RC receivers and accessories

Receiver Reflex Wheel LCD, 7-channel receiver

€35.99

Built as a replacement receiver for the Reflex Wheel LCD 2.4 GHz radio system, this 7-channel unit brings the control link back into compatible RC setups in a compact 35 x 25 x 13 mm format. The small housing, short antenna wire and channel-marked socket strip create a clean technical layout that suits model installations where space and clear wiring matter. The receiver is specified for 2.4 GHz operation and an input voltage of 6 to 11 V. CH1 to CH7 are labelled directly on the unit, making each connection point easy to identify when assigning steering, throttle or auxiliary functions. The visible Analog and Digital selector marking adds another practical hardware detail for matching the receiver to the intended configuration. As a dedicated spare receiver, it is intended for the FS Reflex Wheel LCD 2.4G 7 channel system referenced in the product data rather than as a universal radio component. In workshop use, the compact dimensions help when placing the receiver into tighter chassis layouts, while the marked ports support orderly routing of servo and control leads. Age marking: 14 years. This product conforms to Directive 2014/53/EU.

RC receivers and accessories

Receiver Reflex Wheel PRO 3, RC receiver, 2.4GHz

€29.99

The Receiver Reflex Wheel PRO 3 2.4GHz BEC is a dedicated replacement receiver for the Carson Reflex Wheel PRO 3 BEC RC system. With 5 channels in a compact 45 x 27 x 14 mm format, it brings the core control functions of a model vehicle into a small electronics unit that fits neatly into tight chassis layouts. The black receiver case carries clearly marked ports from CH1 to CH5, making the channel layout easy to follow during installation in compatible RC models. A 2.4 GHz frequency forms the radio link, while the 6 to 8.4 V input range defines the electrical setup for the unit. The housing also shows SET and SW markings, supporting the handling steps needed when integrating the receiver into the matching radio system. As a replacement part, it is intended specifically for the Carson Reflex Wheel PRO 3 BEC system. In workshop use, the compact dimensions help when routing cables through narrow radio boxes or electronics trays in model vehicles. The 5-channel layout also leaves room for functions beyond basic steering and throttle where the compatible setup supports them. Age marking: 14 years.

RC receivers and accessories

Reflex 6/14Ch Switch 4, switch module, 4-channel

€44.99

The Reflex 6/14Ch Switch 4 adds 4 extra switching functions to an RC setup through one receiver channel, turning button, switch or joystick inputs into separate output commands. Its compact 16 x 14 x 4 mm housing and approx. 10 g weight suit installations where space is limited and clean wiring matters. The module connects directly to the RC receiver and evaluates both control position and input duration, so short and long movements in the up and down directions can trigger different outputs. That switching logic gives access to 4 separate NPN outputs, each rated for up to 2.5 A and a maximum switching voltage of 16 V/DC. Every output uses a 200 mm blue silicone cable with 0.25 mm² cross-section and is connected to the negative pole of the load. The black negative cable also measures 200 mm, uses 0.5 mm² cable cross-section, and can be connected directly to the battery or a distribution terminal. Input voltage is 4 to 8 V/DC, with 5.0 to 5.5 V/DC supplied from the receiver, and input current is approx. 18 mA at 5.0 V/DC. A 300 mm servo connection with UNI system supplies the module itself from the receiver, keeping the layout straightforward in model cars, trucks or other RC builds with added electrical functions. For high loads, the black cable is connected to the distribution terminal or drive battery to prevent damage to the receiver. Age marking: 14+  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex Stick Multi Pro Receiver, RC receiver

€51.99

The Reflex Stick Multi Pro receiver brings 2.4 GHz control technology into a compact replacement unit for the matching RC system. With 14 channels and a housing size of 35 x 26 x 14 mm, it adds extensive connection capacity without taking much room inside a model layout. This spare receiver is specified for 4.8 to 6 V input voltage and is built for the Reflex Stick Multi Pro RC system. The front edge carries clearly marked channel outputs from CH1 to CH14, making the connection layout easy to follow during installation. A dedicated bind button is placed on the receiver for pairing with the compatible transmitter, and the F/S Set function allows fail-safe positions to be stored directly on the unit. The visible Batt. connection marks the receiver power input, while the antenna lead is routed from the housing for signal reception. In workshop use, the receiver suits repairs, system refreshes or the replacement of an existing matched unit in a compatible RC setup. Age marking: 14 Years. Batteries are not included.

Remote-controlled systems

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€134.99

The Reflex Wheel Pro 4 set brings core RC electronics together in one 2.4 GHz package built around a 4-channel pistol-grip transmitter, matching mini receiver, 6 kg metal-gear servo and brushless set. The transmitter uses 2 infinitely variable fully proportional channels and 2 additional switchable channels, opening the door to steering, throttle and extra vehicle functions from a single handset. Its LCD interface supports direct setup work for hobby-grade driving, with servo reverse on channels 1 and 2, trim for throttle and steering, dual rate adjustment, Expo and ABS functions, and 15-model memory for running more than one vehicle without rebuilding settings each time. Channel 3 can be programmed as a switch or button function, while channel 4 uses a 3-level switch. An LED battery status display keeps the transmitter power level visible during use. The transmitter operates at 3.6-4.5 V, and the receiver power supply is rated at 3.5-10 V without a BEC. On the vehicle side, the waterproof nano receiver and compact electronics suit tight chassis layouts, while the brushless set adds the drive hardware needed for responsive running. The included instructions complete the set. With 14 Years as the stated age marking, this package fits hobby sessions focused on tuning steering feel, throttle response and auxiliary functions for track, touring or general RC driving.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel Pro 4, RC transmitter, 2.4 GHz

€69.99

The Reflex Wheel Pro 4 brings 2.4 GHz control, LCD setup access and a wheel-style layout into one radio system built for RC model use. With 4 channels, 2 included mini receivers and a transmitter operating voltage of 3.6-4.5 V, it covers steering, throttle and added switching functions in a compact setup for multiple vehicles. Channels 1 and 2 work as fully proportional controls, giving fine input over steering and throttle instead of fixed steps. Channel 3 can be programmed as a switch or button function for a servo, while channel 4 uses a 3-level switch for added onboard functions. Servo reverse for channels 1 and 2 changes direction of travel when a model layout requires it, and the receiver power supply range of 3.5-10 V supports installation in different RC configurations without a BEC. The ball-bearing control unit supports precise steering input, while trim, dual rate, expo and ABS functions allow response to be adjusted to the model and surface. The LCD screen and LED battery status display keep key settings and charge information visible during setup and running. A failsafe function adds a concrete control feature for signal loss situations, and 15-model memory stores settings for different vehicles. The Uni connector system for Futaba and Graupner-J/R broadens compatibility across existing RC equipment. 4 AA batteries are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel X1, RC transmitter, 2.4GHz 2-channel

€47.99

The Reflex Wheel X1 brings 2.4GHz radio control and a classic pistol-grip layout into one focused setup for RC driving. A side steering wheel, trigger throttle and 2 fully proportional channels give fine control over steering and speed, whether the model is lining up for a clean straight or working through tighter corners. At the technical level, the transmitter runs on 4.8 to 6V and pairs with a compact 4-channel mini-receiver measuring 36 x 25 x 15 mm. The receiver power supply supports up to 11V without a BEC, and the Uni connector system J/R broadens compatibility across common hobby installations. A charging socket with positive pole inside is built into the transmitter, and an LED battery status display keeps the power level visible during use. The set is also Tamiya kit compatible, which makes it a practical radio option for many workshop and upgrade projects. Included are a 2-channel 2.4GHz transmitter and a 4-channel 2.4GHz receiver. 14 years marks the recommended age. 4 AA batteries are required separately, so the radio can move straight into bench setup, model installation and the first tuning session once the power supply is in place.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

ReflexWheel PRO3 Receiver, RC receiver, 2.4GHz

€31.99

The ReflexWheel PRO3 receiver brings 2.4 GHz control, 5-channel connectivity and a compact 45 x 27 x 14 mm format into one electronics upgrade for compatible RC vehicle setups. Designed as a replacement receiver for the ReflexWheelPro3 BEC waterresistant radio system, it fits the focused, technical character that model-building enthusiasts expect from workshop-ready running gear. Its channel bank is clearly marked from CH1 to CH5, with a separate BEC connection area that helps keep wiring assignments readable during installation. That layout supports the typical control path in model vehicles, from steering and throttle to added switching functions on extra channels. The stated input voltage of 6 to 8.4 V gives a concrete operating range for integration with matching onboard electronics. A dark translucent case keeps the receiver body compact while the attached antenna lead exits cleanly from the housing for straightforward placement inside the chassis. In practice, this receiver suits repair work, system replacement and the refresh of an existing RC setup built around the ReflexWheel PRO3 platform. Whether a workshop bench is set up for maintenance or a vehicle is being returned to running condition after an electronics swap, the compact footprint and labeled ports keep the installation process focused and easy to follow.

RC remote controls

FS Reflex Stick II, RC remote control, 6-channel

€109.99

The FS Reflex Stick II brings 2.4 GHz control and a classic dual-stick layout to RC vehicles and boats, with 6 channels operated independently through 2 joysticks, 1 ON/OFF/ON button and 1 ON/OFF/ON switch. Its FHSS system uses Frequency Hopping Spread Spectrum for radio transmission, while the included 6-channel receiver completes the core control package. The radio system runs at 6 V from 4 AA batteries and supplies the BEC receiver with 4.8 - 6 V. Servo reverse on 2.4 GHz changes the direction of assigned channels when a servo reacts opposite to the intended command, and the trim function helps dial in channel response with greater precision. A Graupner J/R plug system supports connection within compatible RC setups. The integrated charging socket adds a direct charging connection within the system. Full compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units makes the set a strong match for expanded truck and function-model installations. On the bench, the 6-channel layout supports coordinated setup of steering, throttle and auxiliary functions before the first run. At the lake or on the track, the dual-stick format and extra switching inputs suit models that need more than basic steering and speed control. 4 AA batteries are required separately.

RC remote controls

FS Reflex Stick Multi Pro, RC radio, 14CH LCD

€159.99

The FS Reflex Stick Multi Pro LCD is a 14-channel 2.4 GHz RC radio system built for complex model setups that need more than basic steering and throttle control. With 2 control sticks, 4 pushbuttons, 4 ON/OFF/ON switches and 2 rotary potentiometers, it gives hobby users direct access to multiple functions on vehicles and vessels, from light and sound to winch, support legs, water pump and water monitor control. Its 15 model memories keep different configurations ready for repeated use across several RC builds. The blue backlit LCD supports menu-based setup and status checks, while the 2.4 GHz FHSS system provides stable signal handling in the 4.8 - 6 V operating range. Servo reverse and trim functions are available for channels, and steering setup can be refined further with Dual Rate for servo path limitation, EPA for servo travel limiting and EXP for response adjustment. The system is also fully compatible with TAMIYA MFC 01/03 and DMD units. A failsafe function adds a defined response if signal transmission is interrupted. Included are a 14-channel 2.4 GHz transmitter, a 14-channel 2.4 GHz receiver and a multilingual handbook. 4 AA batteries are required separately for the transmitter. The Graupner-J/R plug system supports integration into compatible RC electronics, making this radio a strong choice for multi-function trucks, working models and other feature-rich RC machines.

RC remote controls

FS Reflex X1, 2.4 GHz radio system, 2-channel

€46.99

The FS Reflex X1 brings classic wheel-style RC control to cars and kits that need precise 2.4 GHz radio handling. Its 2 fully proportional channels work through a side steering wheel and trigger layout, so steering and throttle inputs can be adjusted smoothly across the full control range instead of switching between fixed positions. At the transmitter, servo reverse is available on both channels to invert steering or throttle direction when a model setup requires it. Separate trim functions for steering and throttle help correct the neutral position, and dual rate for both channels limits servo travel for a more measured response. The transmitter operates on 4.8 to 6 V and includes a charging socket with the positive pole inside. An LED battery display shows the transmitter status at a glance during use. The included 4-channel mini receiver measures 36 x 25 x 15 mm, uses the J/R Uni connector system, and supports receiver power up to 11 V without a BEC. This radio system suits Tamiya kit compatible setups and other RC vehicle builds that need compact receiver dimensions and adjustable control behaviour. A 2-channel 2.4 GHz transmitter, a 4-channel 2.4 GHz receiver and a handbook are included. 4 AA batteries are required separately.

RC receivers and accessories

Micro Fail Safe, RC accessory, waterproof

€21.99

Signal loss can end a run in seconds, especially in fast RC cars or on the water. The Micro Fail Safe waterproof adds a defined response to that moment with a compact 26 x 17 x 6 mm housing and an in-line layout built for model installations where every millimetre counts. The unit is designed for RC cars and boat models and activates a pre-programmed servo position when the transmitter fails or the model moves out of range. That mechanism gives the connected servo a fixed fallback action instead of leaving its behaviour undefined. The waterproof housing supports use in environments where spray, splashes or damp conditions are part of the setup. Operating voltage from 4.8 to 6 V fits common receiver systems in this class. Low voltage detection is integrated and can be disabled when the chosen configuration calls for a different response. The J/R servo connection cable keeps installation straightforward within existing receiver and servo layouts. In a chassis, the module can be placed where space is limited; in a boat hull, the sealed case suits confined electronics compartments. Age 14+  Warning! Not suitable for children under 14 years.

Remote-controlled systems

MR-8 2.4GHz MX-F RX, receiver, 8-channel

€49.99

The MR-8 2.4GHz MX-F RX brings multi-channel control into RC builds that need more than a basic steering and throttle layout. Its 8-channel format, marked A through H, opens room for servos and additional switched or proportional functions, while the separate BAT. connection gives the power input its own clearly identified position. The black receiver housing keeps the connector side easy to read during installation, with each channel printed directly on the case beside the pin rows. Visible gold contacts support clean plug-in wiring, and the compact module format suits model layouts where electronics need to stay organised. A recessed SET UP point is integrated into the case for binding or configuration access without adding external parts to the housing. The designation KO Receiver 8Ch MR-8 MX-F RX and the 2.4GHz specification place this unit in the radio electronics side of the hobby, where dependable channel assignment and neat cable routing matter as much as the drive system itself. In workshop use, the labelled port layout helps when assigning steering, speed control and extra functions across larger RC configurations. For 14 Years and up, the receiver fits enthusiast projects where installation, setup and system matching are part of the hands-on model-building process.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Receiver Reflex Pro 3 Nano 2.4G, RC receiver

€28.99

The Receiver Reflex Pro 3 Nano 2.4G brings full RC control into installations where every millimetre counts. Its compact housing measures 35 x 20 x 13 mm and weighs 6 g, making it a practical choice for model vehicles and boats with limited internal space. The receiver works on 2.4 GHz and is designed for Carson Reflex PRO 3, Reflex Stick 2 and Multi PRO radio systems, excluding 500501004. A short antenna wire extends from the unit, while the connector side is clearly marked for CH1, CH2, CH3 and AUX to keep wiring straightforward during installation. The documented input voltage is 6 V. Binding is carried out through the pair pins, and the LED indicates the process status during setup. The fail-safe function is configured only on channel 2 with the binding cable sequence described for the unit. In compact chassis, narrow hulls or tightly packaged electronics trays, the small format helps integrate radio control hardware without crowding the layout. That makes this receiver a strong fit for hobby builds that need Carson system compatibility in a light, space-saving format.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex 6/14Ch Switch 2, switch module, 2 outputs

€39.99

The Reflex 6/14Ch Switch 2 adds 2 switchable functions to an RC setup through a compact switch module measuring 16 x 14 x 4 mm and weighing about 10 g. Connected directly to the receiver, it responds to a button, switch or joystick and turns a single channel into a practical control point for added electrical loads. The 2-way module evaluates switch position rather than long or short duration, making the switching logic straightforward for installations that need 2 clearly assigned outputs. Each separate NPN output uses a 200 mm blue silicone cable and switches up to 2.5 A, with a maximum switching voltage of 16 V/DC. The module draws its own power through the 300 mm servo cable with UNI connection system, while the 200 mm black negative cable can be connected directly to the battery or a distribution terminal. Input voltage is 4 to 8 V/DC, with 5.0 to 5.5 V/DC supplied from the receiver, and input current is about 18 mA at 5.0 V/DC. In RC trucks, crawlers, work vehicles or scale builds, the module suits added lighting or other electrical functions that need reliable on-off control from the transmitter. At higher loads, the black negative cable is connected to the distribution terminal or drive battery to help protect the receiver during operation.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Stick Multi Pro, RC radio system, 14-channel

€129.99

The Reflex Stick Multi Pro brings 14-channel control to demanding RC setups with an interference-free 2.4 GHz FHSS radio system and a layout built for models that need more than basic steering and throttle. In model trucks, boats or construction machines, the combination of 4 proportional channels and 10 switching channels supports detailed command over driving and auxiliary functions from one handset. The transmitter operates on 4.8-6 V from 4 AA batteries, and the receiver uses a 4.8-6 V power supply. Trim is handled by sliders, which supports compatibility with TAMIYA MFC 01, 02 and 03 units as well as the DMD unit. The Graupner J/R plug system supports straightforward receiver connection within many hobby-grade installations. A charging socket with positive pole inside is built into the transmitter, and the LED battery status display keeps the power level visible during running sessions. This RC radio system suits multi-function models where separate switching and proportional control need to work side by side, such as scale trucks with light and sound modules or boats with added onboard functions. The included 14-channel receiver completes the core radio set, while 4 AA batteries are required separately.

RC servos

Servo CS-3, RC servo, low-profile waterproof

€23.99

Compact dimensions matter in tightly packaged RC builds, and the Servo CS-3 brings that advantage with a low-profile housing, metal gears and waterproof construction in one control component. The flat form leaves more space beneath body shells and around steering assemblies, which is especially useful where chassis layouts limit servo height. The CS-3 operates on 4.8-6 Volt and uses a JR plug for connection to compatible RC electronics. Its stated 3 kg rating gives a clear reference point for steering or control tasks in suitable model applications, while the 0.16 specification points to responsive movement for precise input transfer. Metal gearing supports the servo's internal drive path, and the included servo horn set expands the available linkage setup options right from installation. The housing shown with a 3-wire lead and compact top output shaft layout suits the practical demands of model cars, boats and other radio-controlled builds where clean routing and controlled movement matter. In a touring chassis, crawler conversion or other space-conscious project, the low-profile format helps keep the installation neat without giving up key control hardware. Wet running sessions, splash-prone surfaces and mixed-condition track days fit the waterproof design, while the horn options support different connection points during setup.  Warning! Not suitable for children under 14 years.

RC servos

Servo CS-6, RC servo, waterproof metal gear

€20.99

The Servo CS-6 brings regular-size format, waterproof construction and a metal gear train into one RC servo for model applications that need controlled movement under load. With 6 kg output and a JR plug, it suits installations where a standard servo must slot cleanly into existing RC layouts for steering, throttle or other linkage-driven functions. The black housing carries a central output shaft topped with a cross horn, and the included horn set adds both a single-arm option and a 4-arm servo horn with multiple mounting holes. That layout allows different linkage connection points and helps tune the travel to the mechanics of the model. Rubber grommets support the mounting points during installation, and the supplied screw secures the horn to the servo shaft. The short designation also states a speed value of 0.2, adding another concrete reference point for hobby setups that balance force and response. In an RC car, boat or other model with servo-operated controls, the CS-6 fits the role of a compact actuator that converts radio commands into precise mechanical movement. The waterproof build makes it a practical choice for running sessions where spray, wet grass or puddled surfaces are part of the route.  Warning! Not suitable for children under 14 years.

RC servos

X-Crawlee PRO, servo, waterproof metal gear

€25.99

Built for wet sections and technical crawling lines, the X-Crawlee PRO servo combines waterproof construction with a metal gear train and 6 kg steering force in a regular-size format. The CS-6 unit is designed as a dedicated servo for the X-Crawlee PRO, giving RC model setups a compact control component that suits muddy ground, splash zones and mixed outdoor terrain. The housing carries a JR connection lead for integration with compatible RC electronics, while the included servo horns provide the mechanical link for steering or other control tasks. Rubber mounting grommets sit at the fixing points to help decouple vibration from the chassis, and the included mounting hardware supports a tidy fit during installation. The metal gear layout is a key match for applications where steering loads rise on rough surfaces, because the gear train transfers servo movement directly to the linkage with a solid mechanical feel. On rock sections, damp forest tracks or backyard crawler courses, the waterproof build keeps the servo focused on control rather than conditions. Combined with the regular-size format, the set fits naturally into hobby-grade RC builds that need a dedicated steering component for precise input under load.  Warning! Not suitable for children under 14 years.

RC servos

CS-10DS Low-Profile Servo, RC servo, waterproof

available from December

The CS-10DS Low-Profile servo brings a flat 25 mm overall height together with quick steering response, making it a strong fit for RC chassis where installation space is tight and steering inputs need to register fast. In touring cars, drift models and buggies, the compact 40.5 x 20.5 x 25 mm format sits neatly into layouts that leave little room for a taller unit. At 6V, the servo delivers 9.53 kg.cm and moves through 60° in 0.09 sec, combining steering force with sharp reaction speed in one compact assembly. A coreless motor drives the action, while the metal gearbox passes that output on through a more direct mechanical path than a basic gear train. The 2 ball bearings support the shaft under repeated steering movement, and the 25-tooth output gearing gives a defined mounting point for compatible servo arms. The housing is waterproof, which broadens the range of running conditions when a model heads onto damp tarmac, dusty car parks or mixed outdoor surfaces. Weight stays at 44.3 g, helping this servo suit builds where component dimensions and mass both matter. A servo horn set is included for installation. The JR connection supports integration into many RC model layouts, making the CS-10DS a focused upgrade for steering systems that need speed, torque and a low-profile form.

RC servos

CS-15DS Low-Profile Servo, RC servo, waterproof

available from December

The CS-15DS Low-Profile servo brings compact dimensions, high steering speed and strong output into one RC upgrade for 14 Years and up. With a housing size of 40.5 x 20.5 x 27.5 mm and a weight of 52 g, this low-profile unit suits chassis layouts where installation height matters but steering performance still needs to stay sharp. Inside the case, a coreless motor drives a positioning time of 0.07 sec per 60° at 8.4 V, giving fast reaction to steering commands during touring, drift or buggy running. The output reaches 15.6 kg.cm at 8.4 V, and the metal gearbox is built to transmit that force with controlled, accurate movement. Two ball bearings support the drivetrain and contribute to steady servo action through repeated direction changes. The JR plug-in system supports straightforward integration into compatible RC setups, and the included servo horn set provides the mounting hardware needed for installation. The waterproof construction keeps the servo ready for sessions in rain or on damp ground where exposed electronics face harsher conditions. In flat on-road chassis, drift builds or modern buggy platforms, the low 27.5 mm overall height opens up space-sensitive installations without giving away the speed and torque needed for precise steering input.

RC servos

CS-16DS Low-Profile Servo, RC servo, waterproof

available from December

The CS-16DS low-profile servo brings compact dimensions and fast control to RC installations where every millimetre matters. With a housing size of 40.5 x 20.5 x 28 mm and a weight of 47 g, it suits flat chassis layouts that need a shorter servo height without giving away steering performance. Its operating range of 6 to 8.4 V gives flexibility across common RC electronics setups, while the waterproof housing supports running in wet conditions where splashes and damp surfaces are part of the session. The 2 ball bearings support the output shaft through repeated steering movement, and the 25-tooth output gearing provides a defined interface for compatible servo hardware. A servo horn set is included, and the JR plug system supports straightforward connection in many RC model layouts. In touring cars, drift cars and other compact RC builds, the low-profile format leaves more room around the chassis top deck and steering assembly. The combination of 15.6 kg.cm torque at 8.4 V, 0.09 sec per 60° speed and a metal gearbox suits quick direction changes, tight line corrections and controlled input through technical sections.

RC servos

CS-20DS Standard Size Servo, RC servo, waterproof

available from December

The CS-20DS standard size servo brings fast actuation and high control force to RC models that need a serious steering or throttle component. With a voltage range of 6 to 8.4 V, 25 kg/cm torque at 8.4 V and a transit speed of 0.10 sec per 60°, it suits builds where quick response and firm holding power matter on the track or over rough ground. Its internal layout combines a core motor with a metal gear train and 2 ball bearings, a setup aimed at accurate movement under repeated load. The housing measures 40.5 x 20.2 x 38 mm and weighs 62 g, making the servo a regular-size format that fits many common RC installations without oversized packaging around the mechanism. The 25-tooth output gearing provides a defined interface for linkage setup, and the included servo horn set supports installation work straight into the model. Waterproof construction expands the range of running conditions to wet surfaces and rainy sessions where exposed electronics need added protection. In off-road chassis, touring cars and upgrade projects, the CS-20DS can take on steering duties where fast centring and strong torque shape the handling feel. It also suits kit-based model builds that call for a standard size servo with JR connection and clearly stated electrical and mechanical data.

RC servos

CS-46DS Servo, RC servo, standard size, waterproof

available from December

The CS-46DS brings high steering force into a standard size servo format, combining 46.9 kg.cm actuating torque at 7.4 V with a coreless motor for strong, immediate control in demanding RC builds. Its black, blue and silver housing adds a technical look that suits off-road trucks, crawlers and other heavy-duty model setups. Inside the 40.5 x 20.5 x 36 mm case, a metal gearbox and 2 ball bearings support the drive train where steering loads rise under grip, weight transfer and uneven terrain. The 73 g servo format gives builders a clear reference for chassis layout and linkage geometry when planning an upgrade or a fresh installation. The JR plug system supports straightforward connection in compatible RC electronics layouts, and the included servo horn set adds the hardware needed for fitting the servo into the steering assembly. Minimum age: 14 years. In use, the CS-46DS suits models that need firm steering authority when tyres bite into loose ground, climb over obstacles or track through wet sections. Waterproof construction keeps the servo ready for runs in mud, water or snow, where stable steering input matters as much as raw force.

RC servos

CS-46DS-BL servo, RC servo, standard size

available from December

The CS-46DS-BL brings brushless servo power into RC setups that need strong steering authority and fast response. With 47.8 kg.cm torque at 7.4 V, a metal gearbox and a 0.10 sec per 60° transit time, this standard-size servo is built for demanding model applications where control has to stay direct under load. Its 40.5 x 20.5 x 36 mm format follows the common RC standard size, making the servo a practical choice for many existing chassis layouts that use the JR plug system. The brushless motor is paired with 2 ball bearings to support smooth output shaft movement, while the waterproof construction keeps the servo usable when the route includes rain, puddles or mud. At 71 g, the unit combines substantial drive strength with dimensions that fit established installation spaces in many RC vehicles. The specification suits heavy 1:8 off-road trucks, large crawlers and competition-focused builds where steering precision matters on rough ground and during quick corrections. A servo horn set is supplied for installation. For operation, a compatible RC model and power setup are required separately.

RC servos

CS-6DS Standard Servo, RC accessory, waterproof

available from December

The CS-6DS standard-size servo brings compact control hardware to RC model setups with a waterproof housing, metal gears and a core motor in a 40.5 x 20.2 x 40.3 mm format. At 6 V it delivers 7.5 kg/cm torque and a transit speed of 0.11 sec per 60°, giving steering and other control functions clearly stated performance data for hobby builds. Its 55 g weight helps place the unit precisely within the chassis layout, while 2 ball bearings support smooth shaft movement under repeated input changes. The 25-tooth output gearing defines the spline format for matching linkage hardware, and the JR connection identifies the plug standard for compatible radio installations. A servo horn set is included, so the essential mounting interface is already part of the contents. The voltage range of 4.8 to 6 V gives the servo a clear operating window for common RC electronics. In a touring car, buggy, crawler or boat conversion, the CS-6DS suits builds that need a standard-format servo with stated torque, speed and connection details before installation begins. The waterproof design also makes it a practical choice for model applications where moisture resistance matters alongside precise control response.

RC servos

Servo CS-15DS, digital RC servo, standard size

available from December

The CS-15DS brings digital servo control, 15.32 kg/cm actuating torque at 6V and a standard-size 40.5 x 20.2 x 38 mm format into one compact RC component for precise chassis setup. In 1:10 and 1:8 models, that combination suits steering systems that need a strong, fast servo with a clearly defined installation size. Its 4.8-6V voltage range gives flexibility across common RC electronics layouts, while the core motor and 2 ball bearings support controlled movement through repeated steering inputs. The 25-tooth output gearing provides a defined interface for matching servo hardware, and the 62 g weight adds another concrete planning point when balancing the vehicle layout. The black-blue housing keeps the look technical and clean inside the chassis. With age marking 14 Years, the servo sits in the hobby-focused end of the RC range. Waterproof construction makes the servo suitable for running sessions where wet ground, spray or puddles are part of the route. In off-road builds, touring cars or other RC conversions that use a standard-size servo bay, the CS-15DS fits as a focused upgrade or replacement component for direct control input.

RC servos

Servo CS-30DS, RC servo, standard size waterproof

available from December

The CS-30DS brings high steering force into a standard-size servo format, combining 34.6 kg.cm at 8.4 V with a fast 0.13 sec per 60° transit speed for RC models that need both authority and direct response. Its 40.5 x 20.2 x 40.3 mm housing and 62 g weight fit the familiar standard servo class used across many hobby platforms. Inside, a core motor drives a metal gearbox built for high-load operation, and 2 ball bearings support the drivetrain for controlled, low-friction movement. The 25-tooth output gearing provides a defined interface for servo arms and steering linkages, making the unit a strong match for demanding steering tasks rather than light-duty trim functions. Waterproof construction expands the range of running conditions where the servo can stay in service, from damp tracks to off-road terrain with spray and mud. The included servo horn set adds the mounting hardware needed for setup with JR-compatible systems. In a crawler, monster truck or larger off-road chassis, the CS-30DS suits steering assemblies that place real load on the servo saver and linkage. 14 Years marks the recommended age. For hobby work, the combination of standard dimensions, strong torque and quick transit speed makes it a focused upgrade for models that need firmer steering authority.

RC servos

Servo CS-3DS, standard servo, waterproof

available from December

The Servo CS-3DS brings standard-size dimensions, JR connection and waterproof construction into one control component for RC model builds that need a compact, clearly specified servo. With a voltage range of 4.8-6 V, it suits common receiver power setups while keeping the installation focused on a familiar standard format. Its core motor is paired with plastic gears and a 25-tooth output gearing, giving the linkage a defined interface for compatible servo horns and steering assemblies. The listed performance figures of 5.6 kg/cm torque at 6 V and 0.12 sec per 60° at 6 V place the emphasis on quick, controlled movement rather than vague performance claims. Ball bearings are not fitted, and the specification states this plainly for builders comparing component layouts and running requirements. A servo horn set is included, so the control arm hardware is already part of the package. In a touring car, buggy, crawler or boat project, the 40.5 x 20.2 x 37.15 mm housing and 45.5 g weight give concrete reference points for installation planning before the linkage is connected. The waterproof design also suits running sessions where spray, puddles or damp ground are part of the conditions rather than an exception.

RC servos

Servo CS-40DS-BL, RC servo, standard size

available from December

The CS-40DS-BL brings brushless drive, 30 kg.cm actuating torque at 7.4 V and a 0.09 sec per 60° response into one RC servo built for precise control under load. Its black-blue housing, standard JR format and waterproof construction suit demanding running conditions where steering accuracy needs to stay sharp through mud, puddles and rain. Inside, the brushless motor works with a metal gearbox to convert control inputs into strong, direct servo movement. The 2 ball bearings support the output shaft for smoother operation when the linkage is under pressure. With dimensions of 40 x 20 x 29.95 mm and a weight of 66 g, the servo stays within a familiar standard-size format that fits many RC installations. The designation JR/MG/WP/0.11 also points clearly to its standard connection format, metal gear layout and waterproof build. The specification suits RC applications that call for strong steering force and quick correction, including heavier off-road models, crawlers and large trucks where the servo works hard through uneven terrain. In workshop upgrades as well as fresh builds, the CS-40DS-BL adds a focused combination of speed, torque and compact installation dimensions for 14 Years and up.

RC servos

Servo CS-6DS, RC servo, standard size, waterproof

available from December

The CS-6DS brings standard-size servo format, waterproof construction and digital RC control into a compact unit for model setups that need quick, defined movement. With dimensions of 40.5 x 20.2 x 37.15 mm and a weight of 48.5 g, it fits the familiar regular-size class used across many RC applications. Its operating range covers 4.8 to 6 V, giving flexibility for common receiver power systems. At 6 V, the servo reaches 0.12 sec per 60° and 7.0 kg/cm actuating torque, pairing brisk travel with the force needed for linked control tasks. A core motor forms the drive basis, while the plastic gearbox transfers movement through 25-tooth output gearing. The JR connection supports straightforward integration where this plug standard is required. The set also includes a servo horn set for installation. In an RC car, boat or other model using a standard servo bay, the CS-6DS suits roles where clean command transfer and compact dimensions count. Waterproof construction supports use in conditions where moisture is part of the running environment, while the regular-size layout keeps planning around mounting space simple.

RC servos

Servo CS-9DS, RC servo, standard size digital

available from December

The Servo CS-9DS brings digital control, standard-size dimensions and water-protected construction into one compact RC component for 14+ model-building projects. With a 40.5 x 20.2 x 38 mm housing and a weight of 55.6 g, it suits builds that need a clearly specified servo format without adding unnecessary bulk. At 6 V, the unit reaches 9.3 kg/cm actuating torque and a speed of 0.13 sec per 60°, combining firm movement with fast response for steering and other control tasks. The internal layout uses a metal gearbox, a core motor and 2 ball bearings, giving the mechanism a concrete technical basis rather than relying on a simple gear train alone. The 25-tooth output gearing also matters during setup, because it defines compatibility with the servo horn connection used in the linkage. In an RC car, boat or other model that accepts a standard-size servo, these figures support direct, controlled input when the radio command changes direction or position. The water-protected design adds flexibility for running conditions where splashes or wet surfaces are part of the session, while the compact footprint keeps the servo easy to place within a tightly planned chassis layout.

RC servos

CS-17 Servo, RC servo, waterproof metal gear

soon available again

The CS-17 servo brings a waterproof layout, metal gears and a regular-size format into one compact control component for RC models. In steering systems and other linkage-driven functions, the output shaft moves the mounted horn through the receiver signal, turning electronic input into precise mechanical motion at the chassis. The housing uses a JR plug connection and a 3-wire lead for standard RC receiver hookup. The mounted horn fixes to the splined output shaft with a central screw, and the included cross horn and single-arm horn offer different linkage attachment points for setup changes. Rubber grommets support the mounting points during installation, helping isolate the servo where the chassis passes vibration into the mounting tabs. The short description identifies a 0,2 specification, while the data does not define the unit, so that figure is left unstated here. With its waterproof construction, the servo suits model use on damp ground, wet surfaces and outdoor tracks where exposed running conditions are part of the session. The regular-size case fits the common servo class used across many hobby applications, and the metal gear train makes it a practical choice wherever control inputs need to be transmitted reliably through repeated movement.  Warning! Not suitable for children under 14 years.

RC remote controls

FS Reflex Stick Pro 3.1, RC transmitter, 2.4 GHz

soon available again

The FS Reflex Stick Pro 3.1 brings classic stick-transmitter handling to 2.4 GHz RC control, pairing 2 fully proportional channels with gradual response for measured steering and throttle inputs. With its 4.8-6 V operating voltage from 4 AA batteries, the radio system is set up for hobby use where clear control and direct adjustment matter at the bench and on the track. Channel 1 features dual rate to limit servo travel when a model needs a narrower steering range, while channels 1-2 add trim and servo reverse for matching direction and neutral position to the installed setup. The included 4-channel receiver expands the system beyond the transmitter name alone and connects through the Futaba/Graupner J/R plug system. A fail-safe function adds a concrete control safeguard if signal transmission is interrupted, and the LED battery status display shows the transmitter power state at a glance. The charging socket with positive pole inside adds a dedicated connection point to the radio unit itself. In use, the layout suits model-building enthusiasts who prefer stick control for boats, vehicles or other compatible RC builds with 2-channel operation. The combination of receiver, adjustment functions and 2.4 GHz radio link supports setup work, fine correction and regular driving sessions without turning the transmitter into a one-setting system.

RC remote controls

2K remote control NemeSys

only available from customer service

2-channel remote control for the NemeSys 500404314

RC servos

CS-30 DRAKURO Servo

only available from customer service

30 kg steering servo for DRAKURO 500409096 and 500409097

RC servos

Digitalservo CS30- 30kg ballb./JR plug

available in stores

Carson CS-30 digital servo (500502053) is a powerful, digital standard servo specially developed for demanding 1/10th and 1/8th scale models. Waterproof metal gearing and ball bearings ensure durability; it delivers 300 N-cm at 4.8-6 V and responds in 0.19 s. Compact (40×20×38 mm), 50 g, incl. servo horn set - ideal for wet and cold applications.   Warning! Not suitable for children under 14 years.

Remote-controlled systems

FS 15K Reflex Stick Pro 4, RC remote control

available in stores

The FS 15K Reflex Stick Pro 4 LCD-MFC 2.4GHz brings broad channel control and precise radio setup to complex RC builds. With 15 controllable channels, a 2.4 GHz FHSS system and a range of up to 150 m, this RC remote control suits functional models that need more than basic steering and throttle, whether on the workbench or out in operation. The included 15-channel receiver is compact and lightweight, which helps when space inside a model is limited. A blue backlit LCD display keeps key settings visible, while 15 model memories store different vehicle setups in one unit. Channels 1-4 can be adjusted with dual rate, EPA and EXP, and servo reverse with trim function supports accurate channel setup across the system. The transmitter operates at 4.8 - 6 V and uses 4 AA batteries. Graupner J/R connector compatibility adds flexibility when integrating existing RC components. Full compatibility with the Tamiya MFC sound unit allows its functions to be controlled directly via buttons, which is especially useful in detailed truck and functional model layouts. New stick units with sensitive mechanics, 3-position toggle switches, 3-position push buttons with centre position and height-adjustable CNC-milled aluminum sticks give the control layout a more tailored feel during longer driving sessions. A receiver, instruction manual and transmitter are included.

RC receivers and accessories

KO MC-8 Xpansion Unit EXP-801 MFC-03/02

only available from customer service

500501547 KO MC-8 Xpansion Unit EXP-801 MFC-03/02 from Carson extends the KO PROPO MC-8 remote control system and enables direct control of the TAMIYA MFC-03 and MFC-02 at the touch of a button. Up to ten functions can be controlled, installation is simple, ideal for model builders who need more control.

RC servos

PDS-2503Response Servo LP

only available from customer service

Carson KO Servo PDS-2503 Low Profile (500502049) is a compact powerhouse for 1:10 EP On-/Off-Road. With 7.4 kg/cm (72.55 Ncm) torque, 0.12 s/60° response time and 4.8-6.0 V operating voltage, it delivers precise directional stability. Reinforced plastic gearbox and housing, coreless motor, 41×31.8×21 mm, 39.9 g, 220 mm cable, FUT/UNI connector. Scope of delivery: servo, screw for rudder horn, 4 rubber grommets and instructions.   Warning! Not suitable for children under 14 years.

RC remote controls

REFLEX-S transmitter 2023

only available from customer service

RC remote controls

REFLEX-S transmitter with ESC/RX unit 2023 TAM

only available from customer service

RC receivers and accessories

RX Switch Harness w/Dry battery holder

only available from customer service

Carson 500503071 KO switch cable with battery box offers model builders a reliable external power supply for the KO PROPO MC-8 - particularly important for combustion models. The box holds four AA batteries (1.2 V), the 340 mm long, continuously soldered cable is ready for use with UNI/FUT plug. The on/off switch can be mounted using two M2 screws (drilling distance 19 mm), switch dimensions 26×11×20 mm.   Warning! Not suitable for children under 14 years.

RC servos

Steering servo with lever 5-pole NemeSys

only available from customer service

Steering servo 5-pole incl. servo lever for the NemeSys 500404314

RC receivers and accessories

Switch Harness BEC(for MR-8)

only available from customer service

Carson switch cable BEC 500503072 is the ready-to-use connection cable for KO PROPO systems such as the MC-8 (500501040). It has a TAMIYA plug for 7.2V racing pack and a UNI/FUT receiver plug, 350 mm cable length, drilling distance 19 mm; switch 26×11×20 mm (15 without slider). Mounting with two M2 screws or double-sided adhesive tape.   Warning! Not suitable for children under 14 years.

RC servos

XS-Chassis 8kg Servo for 1:10 RC Models

only available from customer service

The XS-Chassis 8 kg servo is a dedicated steering component for selected 1:10 CARSON XS-Chassis vehicles. It is specified for the model references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363, covering Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants named in the data. Used as the steering servo, this part converts control input into the front-wheel movement that guides the vehicle through turns and line corrections. The 8 kg rating gives the steering system a defined force value for compatible chassis maintenance or replacement work. Because the data identifies the servo for the XS-Chassis platform, the fit is tied to that chassis family rather than to a generic 1:10 application. The part is therefore suited to restoring the intended steering function on the listed models without guesswork about compatibility. In workshop use, the servo fits naturally into repair, upkeep or planned parts replacement on an existing RC vehicle from the named XS-Chassis range. The listed model references make it easier to match the part to the correct Stadium Fighter, Offroad Fighter Cage, Tekuro or Ryken version before installation.

RC remote controls

FS Reflex Stick Pro 3.1 2.4G LCD 4 Ch

available in stores

The FS Reflex Stick Pro 3.1 2.4 GHz LCD (500500085) is a compact 4-channel remote control for model builders who demand precise control. Two infinitely variable, fully proportional channels, 15 model memories, servo reverse and trim, two additional switching channels, dual rate, EPA, EXP and failsafe offer variable fine adjustment. Operation 4.8-6 V (4×AA), charging socket, Graupner J/R plug; the 4-channel receiver no. 500501533 is recommended.

RC receivers and accessories

Receiver 10 CH. Reflex Stick Touch

only available from customer service

Receiver Reflex Wheel PRO 3 2.4 GHz   Warning! Not suitable for children under 14 years.

RC receivers and accessories

Receiver Reflex Wheel Ultimate T.2.0

only available from customer service

Receiver Reflex Wheel Ultimate T.2.0

RC remote controls

Reflex Stick Truck-Set 2.4G, RC set, 6-channel

available in stores

The Reflex Stick Truck-Set 2.4G brings the core electronics for an RC truck into one coordinated package, centered on a 6-channel 2.4 GHz stick transmitter and matched receiver. With 2 servos, a truck control unit, truck motor, LED truck light, a 7.2 V 2100 mAh battery pack and an Expert Charger 1 A, the set covers the main control, drive and lighting functions needed for a model truck layout. The radio system uses FHSS transmission, a frequency-hopping signal method that supports a steady connection between transmitter and receiver. Servo reverse and trimming are available on all channels, which helps align steering direction, throttle response and added functions to the truck's installation. The transmitter operates on 4.8 to 6 V from 4 AA batteries, and the receiver power supply is also specified at 4.8 to 6 V. A Graupner-J/R plug system is stated for the connections, giving the set a defined interface for compatible RC components. On the bench, the included electronics suit a fresh truck build as well as a replacement setup for an existing model. Once installed, the combination of radio control, motor drive, steering servos and LED lighting supports realistic truck running with controlled manoeuvres and added light functions during operation.

RC remote controls

Reflex Wheel Start, radio system, 2.4 GHz

available in stores

The Reflex Wheel Start radio system brings 2.4 GHz control, a compact 3-channel layout and a classic wheel transmitter format into one setup for RC vehicle use. The grey handheld transmitter works with a matching 3-channel mini-receiver, creating a focused control package for steering, throttle and an additional channel. Its fully proportional channels allow gradual input instead of simple on-off commands, so steering corrections and throttle changes can be fed in with more precision. Servo reverse changes the direction of the channel output when a steering or throttle function needs to be matched to the installed electronics. Separate trim settings for steering and throttle help centre the response, while dual rate on both channels limits servo travel for a more controlled setup range. The transmitter operates on 4.8 to 6 V, and the receiver can be powered with up to 11 V without BEC. The Uni connector system supports Futaba and Graupner-J/R compatibility. Included are a 3-channel 2.4 GHz transmitter, a 3-channel mini-receiver and instructions. The 14 years marking is stated in the product data. This radio set suits hobby workbench setups, replacement installations and fresh RC vehicle builds where compact receiver dimensions and direct wheel-style control are part of the plan.  Warning! Not suitable for children under 14 years.