Italeri

Military aeroplane models

1:48 JAS 39 A GRIPEN

€28.99

Article number: 510002638 Product: 1/48 JAS 39 A GRIPEN Model Dim.: 30 cm Decals for 2 versions The Gripen is the standard fighter-bomber of the modern-day Swedish Air Force, where it came into service just a few years ago. Extremely manoeuvrable and compact, its sophisticated electronics provide it with all-weather, night-time flight capabilities. The aircraft can be fitted with an array of the latest air-air and air-surface weapons.

Model car kit

1:12 FIAT Abarth 695 SS/ Assetto Corsa

Article number: 510004705 Product: 1:12 FIAT Abarth 695 SS/ Assetto Corsa Model Dim.: 25,0 cm New moulds - Highly detailed model - Openable hood and trunk - Open or closed top - Opening car doors - Steerable wheels - Working suspension - Rubber tires - Photoetched and chromed parts One Model in two versions: - Fiat Abarth 695SS - Fiat Abarth 695SS Assetto Corse The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. In addition to the classic Fiat 500, that obtained an impressive commercial success all over the World, the Italian car manufacturer Abarth produced several special versions characterized by unmistakable sporting and racing attitude. In 1964 Abarth, originally founded as racing team, presented two interesting versions developed on the Fiat Nuova 500 chassis and body : the 695 and the 695 SS. Both versions were equipped with a 689 cm3 engine and were able to reach the max speed of 140 Km/h. In 1965 Abarth developed the Fiat 695 SS Assetto Corsa with improved performances and feature Detailed plastic kit of model FIAT Abarth 695 SS/ Assetto Corsa In scale 1:12

Model car kit

1:24 Mercedes-Benz 190E

€37.99

Article number: 510003624 Product: 1:24 Mercedes-Benz 190E Introduced in 1982, it marked a turning point in the production of the prestigious Stuttgart car manufacturer. The "190" was in fact the entry version of the Mercedes product range but nevertheless contained important stylistic and technical innovations. The design, with an excellent mix of style and elegance, will later also influence the cars of the higher segments of future Mercedes production. From a technical point of view, the car adopted a longitudinal front engine, rear-wheel drive and disc brakes on all four wheels. MacPherson front end and "multilink" rear suspension. The first versions produced were equipped with two petrol engines of 1,998 cm3 with carburetor or, in the 190E version, with injection. Shortly after, the 2.3 16V sports version was presented which was also used in single-make sports competitions such as the 1984 "Nurburgring Champions Race Cup", which was attended by famous drivers of the period and some "old glories" of Formula 1. Detailed plastic kit in scale 1:32

Model trucks

1:24 Mercedes-Benz SK1844 LS V8

€59.99

Article number: 510003956 Product: 1:24 Mercedes-Benz SK1844 LS V8 The trucks of the Mercedes-Benz SK series ("Heavy Class" or "Schwere Klasse" in German) were manufactured from the late 1980s. The series is a direct development of the earlier NG models. Among other things, the cabin has been improved to offer more comfort on long journeys. Reliability has also been sustainably increased through the introduction of new technical and electronic solutions. Compared to the previous series, the design has also been significantly modernized. The market appreciated the vehicles of the SK series for their reliability, robustness and operational flexibility in all types of applications. The series' great commercial success led to exceptional longevity. At the end of the 1990s, the SK models were replaced by the first versions of the new Mercedes-Benz Actros. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35   Warning! Not suitable for children under 14 years.

Model trucks

1:24 Opel Blitz Truck

€45.99

Article number: 510003960 Product: 1:24 Opel Blitz Truck The Opel Blitz project was set up with the aim of mass producing a robust and reliable commercial vehicle that could be used for different applications and tasks. Opel began production of the early trucks, based on a typically US "layout", in its Russelsheim plant in the early 1930s. This was a success story that evolved over time and continued until the mid-1970s. The Opel Blitz’s sturdy structural characteristics were noted by the Wehrmacht and subsequently deployed by them during the Second World War, in both the 4x2 and 4x4 versions. However, its wartime role was later to be eclipsed by its the great commercial success as a civilian vehicle. During the post-war reconstruction period the Opel Blitz was indispensable to Germany’s recovery, being used by merchants, craftsmen, industrialists and many others to rebuild the country. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Model car kit

1:24 VW Golf GTI Rabbit

€37.99

Article number: 510003622 Product: 1:24 VW Golf GTI Rabbit The Volkswagen Golf is an iconic vehicle designed and produced by the Wolfsburg car manufacturer. It was first introduced in Spring 1974 and immediately became a highly successful commercial product. The first series (1974-1983), offered leading edge technical capabilities to a very receptive consumer market of that period, including a water-cooled front engine, front-wheel drive, solid and robust bodywork with a functional but equally attractive design. The high quality to price ratio was the real "competitive edge" that made the Golf so successful however. At the Frankfurt Motor Show in 1975, the sporty version Golf GTI was introduced which incorporated the high performance 110 HP 1,600 cc engine. The following year saw the mass production of the Golf GTI and in just two months it achieved notable commercial successes in many European and non-European countries Detailed plastic kit

Model tanks

1:35 BMW R 75 with Side Car

€11.99

Article number: 510000315 Product: 1:35 BMW R 75 with Side Car Model Dim.: 6,6 cm Contains 3 figures. Decal for one version. The new German army made use of the experiences collected in World War I to realize their modern reconstruction based on motorization. In spite of the limitations of the Treaty of Versailles able commanders introduced civilian vehicles into the army, thus creating a motorized mentality. In 1940 already, a battalion consisting of 3 to 4 companies each equipped with 52 motorcycles with sidecars and 4 motorcy-cles (single), was integrated into the motorized infantry and the armored divisions. Moreover, motorcycles were present in nearly all other Wehrmacht units, especially with the reconaissance units and the command, as well as the pioneer and the supply units. Produced in 16.500 units, the BMW R 75 together with the Zijndapp KS 750 formed the nucleus of the motorized units on all theatres of operations, especially in Africa and in Russia. The motorcycle was armored with an MG 34 mounted on the sidecar. On the road, it reached a maximum speed of 92 Km/h.

Model tanks

1:35 German Truck 3to. TYPE S

€26.99

Article number: 510000216 Product: 1/35 German Truck 3to. TYPE S Model Dim.: 17,1 cm Registered by the Wehrmacht under the designation LKW 3,6-36 S 3t Blitz, this truck was the typical example of that practice of unification adopted in 1938 for the construction of civil transport means convertible into military vehicles. Actually, this truck - OPEL without BLITZ - was manufactured for commercial use featuring more or less the same characteristics.

Model tanks

1:35 Kfz. 69 Schwimmwagen

€12.99

Article number: 510000313 Product: 1/35 Kfz. 69 Schwimmwagen Model Dim.: 10,9 cm including 3 figures Decals for one version As the Volkswagen 82 (Kubelwagen) proved very successful during the campaign in Poland, it was necessary to produce everincreasing numbers of this vehicle. Later, Ferdinand Porsche developed an amphibian version of this car, called the Schwimmwagen. The light weight of this vehicle (about 1/2 ton) permitted crossing of muddy areas, since only two men were sufficient to keep this vehicle moving. For reconnaissance and liaison missions, water had to be crossed frequently, which was impossible with other vehicles.

Model tanks

1:35 Motorcycle side car Zündapp KS750

€11.99

Article number: 510000317 Product: 1:35 Motorcycle side car Zündapp KS750 Model Dim.: 6,6 cm CONTAINS 3 FIGURES The Treaty of Versailles forbade the reconstruction of the German army. Nevertheless, its commanders evaded the obstacle by introducing vehicles of the civil production, which was not subject to any limitations. Thus they set up entire companies equipped with motorvehicles, developing in this way a "motorized mentality" among the crews. The Zündapp. with a production total of 18.000 units due to its structure which guaranteed easy and economical handling - was considered one of the most modern accomplishments of the age in the field of motorcycle construction. Because of its extraordinary qualities, the Zündapp could follow and escort the tank units of the Wehrmacht and the Waffen-SS to all theatres of operations, especially in Russia, since the side car was even furnished with heating for hands and feet of the man. Zündapps were distributed to all units of the armed forces, Only after 1943, they were replaced by 4-wheel vehicles. Detailed plastic kit of model Motorrad-Gespann Zündapp KS750 in scale 1:35

Model tanks

1:35 U.S. Motorcycles WWII

€11.99

Article number: 510000322 Product: 1:35 U.S. Motorräder WWII Model Dim.: 6,4 cm D-DAY SERIES - NORMANDY 1944/2014 D-DAY SERIES - NORMANDY 1944/2014 THE BOX CONTAINS 2 MODELS & 2 FIGURES - The United States and many of her Allies used HARLEY DAVIDSON motor-cycles as liaison and staff vehicles. Front line troops also employed for their Military Police these motorcycles to direct traffic and control troop movements.

Model tanks

1:35 VW Typ 82 Kübelwagen

€12.99

Article number: 510000312 Product: 1:35 VW Typ 82 Kübelwagen Model Dim.: 10,6 cm additionally 2 figures are included Decals for one version Rommel was in the first general to use the Volkswagen during the military operation in France. He was so impressed by it that he, afterwards, when he was in charge of the Afrika Korps, reordered an ever increasing number of the vehicles. The K?belwagen distinguished itself immediatley by its enormous efficiency on all kinds of terrain, in spite of its small horse power (hardly 24 HP) and the driver on the rearwheels only.

Military figures & accessories

1:72 2nd WW German Paratroopers

€10.99

Article number: 510006045 Product: 1:72 2nd WW German Paratroopers The "Fallschirmjäger" were, during the war, merged in the fighting bodies of the Luftwaffe for a better coordination with the air forces. The conquest of Crete during operation Merkur, in May 1941, was one of the biggest successes of German paratroopers. But the casualties were so high that their use was often limited to an elite infantry role more than as airborne troops. In March 1944, General Kurt Student's 1st Division Fallschirmjäger, holding their ground among the ruins of the Monastery of Montecassino, strenuously resisted the advancing Allies. Their resistance was so fierce that they were nicknamed the "Green Devils". Contains 50 figures.

Military figures & accessories

1:72 Battlefield Buildings

€9.49

Military figures & accessories

1:72 German Infantry

€10.99

Article number: 510006033 Product: 1:72 German Infantry Wehrmacht was the name used by the German army during the war on all European and North African fronts for almost 6 years, from 1939 to 1945. On September 1st, 1939, two Wehrmacht army groups invaded Poland, thus starting World War II. The models in this kit represent Wehrmacht infantry units with the typical feldgrau-colored uniforms and with individual equipment composed of a Mauser K-98 rifle and a MP40 submachinegun. Contains 50 figures.

Military figures & accessories

1:72 WWII - German Paratr.Tropical Unif.

€13.99

Model railways

1:87 Locomotive BR41

€19.99

Article number: 510008701 Product: 1:87 Locomotive BR41 Model Dim.: 27,5 cm From 1936, within the building programme for the German National Raiways (DRG), the BR 41 class of "standard" locomotives was developed for fast good trains. During the trial period the BR 41 received the nickname "Ox loco" because it was used for hauling fast cattle trains. Subsequntly, a total of 366 of the BR 41 locomotives were built, split among almost all the German locomotive builders. The BR 41 was designed as a so-called multi-purpose locomotive. In addition to its proper application – hauling express goods trains – its maximum speed of 90km/h enabled it to be used for fast and even express passenger trains. HO/1:87 Scale

Model tools

Workstation for modelling

€48.49

Model brushes

00 Brush Synthetic Flat - SINGLE PACK

€1.59

Model brushes

000 Brush Synthetic Flat - SINGLE PACK

€1.49

Model brushes

1 Brush Synthetic Round - SINGLE PACK

€1.79

Model car kit

1:12 Alfa Romeo 8C 2300 Monza Nuvolari

€169.99

Article number: 510004706 Product: 1:12 Alfa Romeo 8C 2300 Monza Nuvolari Model Dim.: 32,0 cm 100% NEW MOULDS - Colors Instructions Sheet - Steering wheels - Realistic suspension - Highly detailed engine - Rubber tires - 300 plastic parts - 30 Chromed parts - Photoetched parts - Opening cowling - Screws, tubes, rope and nylon net

Model car kit

1:12 Alfa Romeo 8C/2300 1931-33

€169.99

Article number: 510104708 Product: 1:12 Alfa Romeo 8C/2300 1931-33 Model Dim.: 32,0 cm Colors Instructions Sheet - Steering wheels - Realistic suspension - Highly detailed engine - Rubber tires - 320 plastic parts - 30 Chromed parts - Photoetched parts - Opening cowling - Screws, tubes and nylon net The Alfa Romeo 8C can be considered as one of the most famous sports cars of the 1930s. The car's name derives from the engine adopted: an 8-cylinder in-line supercharged engine with a displacement of 2,336 cc. The Alfa Romeo could be considered the "state of art" for technology, innovative solutions and performances. Characterized by an impressive reliability and driveability the "8C" achieved significant victories in international car racing competitions. It linked its name to the famous Italian driver Tazio Nuvolari that won, among the others, the Targa Florio race in Sicily and the prestigious Italian Grand Prix at Monza. This last victory gave the "Monza" name to the twin seater GP car. From the racing version, a production batch of almost 200 vehicles was produced for the private markets and to be used on the normal road.To celebrate the 110th anniversary of the famous Italian manufacturer we are releasing the two-seater Sport version of the 1930’s. The car was distributed at that time via the Alfa Romeo sales network to those customers wealthy enough to purchase the most successful sports car of the period. Detailed plastic kit in scale 1:72

Model car kit

1:12 Bugatti 35B Roadster

€169.99

Article number: 510004713 Product: 1:12 Bugatti 35B Roadster The Bugatti Type 35 is one of the most iconic and revered racing cars in motor racing history, both technically and competitively. Ettore Bugatti's masterpiece was a unique mix of engineering skill, design, elegance, speed and its relatively light weight. Produced during the 1920s, it won an incredible number of races in both "road" and "on track" competitions. The Bugatti was in fact specifically designed for the world of racing, which included the introduction of technical and mechanical solutions for the car that made it ideal for the racing circuits of the period. Aesthetically, it was universally known and recognisable by the unmistakable shape of the horseshoe-shaped radiator which was a key design feature of Bugatti as a car manufacturer. Due to its 2,263 cm3 8-cylinder engine with a four-speed mechanical gearbox and equipped with a volumetric compressor, the Bugatti Type35B was able to attain a top speed of 210 km / h. In particular, the Bugatti 35C, due to its perfect balance between performance and handling, can be considered among the best "Type35" ever made. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Model car kit

1:12 Bugatti Type 35B

€169.99

Article number: 510004710 Product: 1:12 Bugatti Type 35B The Bugatti Type 35 is one of the most iconic and revered racing cars in motor racing history, both technically and competitively. Ettore Bugatti's masterpiece was a unique mix of engineering skill, design, elegance, speed and its relatively light weight. Produced during the 1920s, it won an incredible number of races in both "road" and "on track" competitions. The Bugatti was in fact specifically designed for the world of racing, which included the introduction of technical and mechanical solutions for the car that made it ideal for the racing circuits of the period. Aesthetically, it was universally known and recognisable by the unmistakable shape of the horseshoe-shaped radiator which was a key design feature of Bugatti as a car manufacturer. Due to its 2,263 cm3 8-cylinder engine with a four-speed mechanical gearbox and equipped with a volumetric compressor, the Bugatti Type35B was able to attain a top speed of 210 km / h. It was produced in limited numbers until 1930. Detailed plastic kit

Military aeroplane models

1:12 F-104G Cockpit

€34.99

Article number: 510002991 Product: 1:12 F-104G Cockpit Model Dim.: 14,7cm/9,0 cm 124 parts - Fully detailed real F-104 cockpit controls - Fully detailed Martin Baker Mk.I Q ejection seat - Complete cockpit dials decals - Adhesive acetate silk seat belts - Pilot’s helmet and oxygen mask - Pilot’s visor, gunsight and radar scope clear parts The Lockheed F-104 Starfighter is one of the most renowned fighters in aviation history and also the one with the longest operational service. Its history began at the end of the ‘50s and ended with some air forces in the mid-2000s. Its unique airframe, with slender fuselage and very little wing surface, made this aircraft ideal in an interceptor role. Due to the thrust of its General Electric J79-GE-11A afterburning turbojet engine it could exceed Mach 2,2 with a first class rate of climb. This scale model kit allows modelers to recreate the famous "Starfighter" cockpit with the typical internal layout of the ‘50s and ‘60s fighters, which was ‘home’ to many former NATO pilots. The fine detail of the instrument panel typical of the period, is matched by the highly accurate reproduction of the Martin-Baker ejection seat. Detailed plastic kit in scale 1:12

Model car kit

1:12 Fiat 500 Upgraded Edition

€124.99

Article number: 510004715 Product: 1:12 Fiat 500 F Upgraded Edition The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. Furthermore the new car should be easy to drive, even in the city traffic, and provide very low running costs. The "Fiat 500" was released on the market in July 1957 and it was immediately a success. In 1965 was introduced the 500F, the version with the largest number of units produced. Easily recognizable for the front-hinged doors, in line with the new laws, the Fiat 500F adopted several technical and aesthetic improved solutions as the new frame and the wider windscreen. The Fiat 500F is, still today, the most "classic" version of the whole 500 production and it remains in the heart of a huge number of car fans.   Warning! Not suitable for children under 14 years.

Model car kit

1:12 Fiat 500F (1968 version)

€129.99

Article number: 510004703 Product: 1:12 Fiat 500F (1968 version) Model Dim.: 25 cm 100% new moulds - Highly detailed model - Opened or closed top - Opening car doors - Front and rear opening bonnets - Steering wheels - Working suspensions - Rubber tires - Photoetched and chromed parts The model can be realized in the Anglo-Saxon version with right drive. The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. Furthermore the new car should be easy to drive, even in the city traffic, and provide very low running costs. The "Fiat 500" was released on the market in July 1957 and it was immediately a success. In 1965 was introduced the 500F, the version with the largest number of units produced. Easily recognizable for the front-hinged doors, in line with the new laws, the Fiat 500F adopted several technical and aesthetic improved solutions as the new frame and the wider windscreen. The Fiat 500F is, still today, the most "classic" version of the whole 500 production and it remains in the heart of a huge number of car fans. Detailed plastic kit of model Fiat 500F (1968 version) In scale 1:12

Model car kit

1:12 FIAT 806 Grand Prix

€169.99

The model "Fiat 806 Grand Prix" in scale 1/12 has a length of about 303 mm. UPGRADE PROTAR MOULDS The Fiat 806 Grand Prix adopted significant innovations for its time. In fact, the Fiat 806 was the "progenitor" of the modern Formula One racing cars. Developed and produced by FIAT, the Italian automobiles manufacturer, in 1927, it could be considered the first Grand Prix car ever built before. Thanks to its 180 HP 12 cylinders engine, the Fiat 806 was able to reach and even exceed the speed of 240 Km/h. However, the most important innovations were made in the development of the chassis, mechanics and bodywork. In fact, the engine and gearbox unit was located between the two chassis bars in order to optimize the performance and the drivability. The Italeri model is unique and very detailed (over 400 pieces to be assembled). The bonnet can be open to view the highly detailed engine. It has working steering, soft rubber tires, photo etched parts and little metallic accessories (screws, nuts, springs, etc).

Model car kit

1:12 FIAT Mefistofele 21706c.c. 1923-25

€189.99

Article number: 510104701 Product: 1:12 FIAT Mefistofele 21706c.c. 1923-25 Model Dim.: 45 cm Upgrade Protar Moulds Fiat Mefistofele, the Queen of World Land Speed The one-off racing car "Eldridge", derived from the old Fiat SB4 chassis, became known as Mephistofele for the infernal noise emitted by its powerful aircraft 6-cylinders in-line engine, giving a capacity over 20,000 cm3, not attenuated by exhaust mufflers kept "free" to provide the most significant performance. On 12th July 1924 in Arpajon, the Mefistofele, was able to reach, driven by its pilot and designer Ernest Eldrige, the amazing speed, for the time, of 146,01 miles per hour (over 230 Km/h) and broke the World Land Speed Record achieving an impressive result. The Mefistofele, was characterized by the high back bodywork able to contain the powerful Fiat A-12 liquid-cooled engine and for its structure especially made to achieve the speed record.

Model car kit

1:12 Lancia DELTA 16VHF integ Sanremo'89

€189.99

Article number: 510004712 Product: 1:12 Lancia DELTA 16VHF integ Sanremo'89 The sporty version of the Lancia Delta road model - the "HF" 4WD - is an icon of rally cars. The Delta HF was produced in the second half of the 1980s and took part in the World Rally Championship from 1987 to 1988, won two world championship titles and took first place in numerous races such as the prestigious Monte Carlo Rally and that of San Remo. Its development, the Lancia Delta Integrale, took part in races until 1993, won another 5 world championship titles and consolidated the "Palmares" in the Italian company's off-road competitions. in many aesthetic details that made it more muscular, such as the enlarged fenders and new air inlets on the bonnet, the technology and engine of the HF Integrale have also been improved. The performance of the 1995 cc turbo engine, for example, has been increased to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and the early 90s and brought many famous drivers such as Miki Biasion, Didier Auriol or Juha Kankkunen to victory. Detailed Plastic Kit

Model car kit

1:12 Lancia Delta HF Integrale 16V

€189.99

Article number: 510104709 Product: 1:12 Lancia Delta HF Integrale 16v The sporty version of the Lancia Delta road model - the "HF" 4WD - is an icon of rally cars. The Delta HF was produced in the second half of the 1980s and took part in the World Rally Championship from 1987 to 1988, won two world championship titles and took first place in numerous races such as the prestigious Monte Carlo Rally and that of San Remo. Its development, the Lancia Delta Integrale, took part in races until 1993, won another 5 world championship titles and consolidated the "Palmares" in the Italian company's off-road competitions. in many aesthetic details that made it more muscular, such as the enlarged fenders and new air inlets on the bonnet, the technology and engine of the HF Integrale have also been improved. The performance of the 1995 cc turbo engine, for example, has been increased to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and the early 90s and brought many famous drivers such as Miki Biasion, Didier Auriol or Juha Kankkunen to victory. Detailed plastic kit in scale 1:72

Model vehicles

1:12 Lancia Stratos HF Gr.4

€209.99

The Lancia Stratos is one of the most iconic cars in motorsport history, designed with the specific purpose of dominating rally competitions of its era. Intended to replace the equally renowned Lancia Fulvia HF, it made its debut in the early 1970s. Featuring a modern and highly attractive design, with a low and aggressively styled bodywork crafted by Bertone, the Lancia Stratos was equipped with a 2,400 cc V6 engine, derived from the Ferrari Dino, producing 250 horsepower. The combination of the powerful six-cylinder engine and the innovative lightweight, compact chassis laid the foundation for a vehicle that would revolutionize the history of off-road competitions. The first successes came shortly after its debut in 1973 and were solidified, thanks in part to legendary drivers, with three consecutive World Constructors' Championship titles during the 1970s. Detailed plastic kit

Model car kit

1:12 Mc Laren MP4/2C Prost / Rosberg

€134.99

Article number: 510104711 Product: 1:12 Mc Laren MP4/2C Prost / Rosberg The McLaren MP4/2 was one of the most successful racing cars, securing the most victories in the history of Formula 1. In 1985, the MP4/2B made its debut equipped with a TAG Porsche engine, enhanced by two superchargers capable of attaining 850 hp and displaying aerodynamic designs less showy than the previous cars, and which were also compliant with the evolving new regulations of the period. The project’s engineering and design achievements were ratified by victory in the constructors’ and drivers’ world championships, due in equal measure to the extraordinary talent of driver Alain Prost. In 1986, the project was further enhanced by the MP4/2C version and Alain Prost was again confirmed as world champion. During this new season he was joined by another great Formula 1 talent, the Finn Keke Rosberg. The McLaren MP4/2 has a special place in the hearts and minds of Formula 1 enthusiasts and fans, winning three drivers' championships and two constructors' championships. Detailed plastic kit

Model trucks

1:24 20' Container Trailer

€55.99

Article number: 510003887 Product: 1:24 20' Container Trailer Length of the model 300 mm 100% NEW TRAILER MOULDS Designed to optimize the logistics of road transport, our trailer for 20" containers or swap bodies is inspired by the FCT model (fixed container transportation) produced by Tecnokar, leader company in high-Quality semi-trailer production and distribution since 1986. With its carefully built structure which offers the right balance between stability, sturdiness and durability, the fixed container transportation chassis is a steel Hbeam chassis with a 2′ fifth wheel coupling kingpin, Jost double-speed retractile oscillating rails and Twist arms with zinc-coated twists. It is also provided with the basic ADR standard equipment. Detailed Plastic Kit of model 20' Container Trailer in scale 1:24

Model car kit

1:24 Alfa Romeo Giulietta Spider 1300

€37.99

Article number: 510003653 Product: 1:24 Alfa Romeo Giulietta Spider 1300 Model Dim.: 16,2 cm COLORS INSTRUCTIONS SHEET - DETAILED ENGINE - CHROME PARTS AND CAPOTE FOR CLOSED VERSION In 1962 the Alfa Romeo Giulietta Spider evolved with the adoption of some aesthetic improvements on the bodywork, some interior details and, the new 1.570 cm3 four cylinder engine able to release 92 Hp. Thanks to the new engine the Italian car was able to reach the max speed of 172 Km/h. The mechanical lay-out was based on the rear-wheel drive and four independent wheel suspension. The "Veloce" sport version was able to offer to the customers a powerful engine (112 Hp) with two carburetors and the adoption of the disk brakes on the frontal wheels. Detailed Plastic Kit of model

Model car kit

1:24 Alfa Romeo Guilia 1600 Spider

€37.99

Article number: 510003668 Product: 1:24 Alfa Romeo Guilia 1600 Spider Built by Alfa Romeo, the Giulia Spider was produced from 1962 to 1965 and can be considered the evolution of the Giulietta Spider, from which it takes the main aesthetic lines of the highly successful design. The Giulia was equipped with a longitudinally-mounted inline four-cylinder engine with a displacement of 1,570 cc, more powerful than the previous 1,300 cc engine used in the Giulietta. The adoption of the new engine required modifications to the front hood, which also became a distinctive and characterizing element. Aesthetic improvements were also made to the interior, steering wheel, and instrumentation. The transmission was based on a synchronized five-speed gearbox. It was produced in two versions: the "normale" with 92 HP and the "veloce" with twin carburetors providing 112 HP. It achieved good commercial success and was particularly appreciated for its unmistakable "made in Italy" design. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Model car kit

1:24 Audi Quattro Rally

€36.99

Article number: 510003642 Product: 1/24 Audi Quattro Rally SUPER DECALS SHEET In 1980, during the Geneva Motor Show, the German car manufacturer presented to the public its new twodoor coupé called Audi Quattro. Produced for all the '80s the Italian name choosed by Audi (Quattro is the Italian word for "four") ine was pointed out the main feature and the most important selling point : the fourwheel drive. It was the first time that the 4x4 solution was adopted on a coupé with the goal to achieve high numbers in terms of production and sales on the market. The Audi Quattro was able to release good driving performance, thanks to its frontal longitudinal engine, and very good reliability on all type of road conditions. From the mass production a dedicated car for competitions was developed on 1981 and it debuted in the World Rally Championship, achieving good results. The success of "Quattro" cars is still existing today in fact the name has become a real "brand" that identifies all the range of Audi’s four wheel drive production. Detailed Plastic Kit

Model trucks

1:24 Australian Truck

€61.99

Article number: 510000719 Product: 1:24 Australian Truck Mod.Dim.: 33,2 cm Australian outback truckers covering enormous distances on rugged and unsealed roads needs to equip their rigs with special modifications. They include a huge bull-bar (roo-bar), a sheet of wire mesh for windscreen protection, special dust filters, additional long range fuel tanks, heavy duty wheels, airconditioning and an array of different driving lights. Bulk goods are normally transported in Road Trains, which can have up to 3 trailers with a total length of over 31 metres.

Model car kit

1:24 B.M.W. 320 Gr. 5

€36.99

Article number: 510003626 Product: 1:24 B.M.W. 320 Gr. 5 In 1976 the FIA, within the scope of motor racing competition, introduced a new Group 5 section reserved for "special" production cars. The new rules imposed a body width similar to that of normal series production, upon which however, it was possible to apply dimensionally larger mudguards in order to benefit from wider track widths and larger tires. BMW participated in Group 5 competitions with a dedicated version of its new flagship model, the E21 "320". A new aerodynamic profile was created that integrated the large fenders and it was also fitted with a powerful 300 hp engine. The car was successfully used by the official BMW team and also as a developmental platform for young, emerging drivers.

Model trucks

1:24 Cargo Trailer

€61.99

Article number: 510003885 Product: 1:24 Cargo Trailer Model Dim.: 58,0 cm SUPER DECALS SHEET FOR 2 VERSIONS This latest-generation semitrailer is representative of much of Europe’s on-road haulage vehicles. Featuring an efficient braking system, side impact protection, a considerable load capacity, these trailers are used extensively and are produced by at least ten or so specialised companies, which provide a comprehensive range of variants to meet the specific needs of individual customers.

Model trucks

1:24 Container Auflieger 40Ft

€58.99

Article number: 510003951 Product: 1:24 Container Auflieger 40Ft Model Dim.: 50,5 cm SUPER DECALS SHEET - COLOR INSTRUCTIONS SHEET The freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container in terms of size, volumes and loading capacity makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has become more effective and faster. Even the warehouses and stocking areas management became easier and more flexible. Detailed plastic kit in scale 1:24   Warning! Not suitable for children under 14 years.

Trailers & accessories

1:24 Curtainside Trailer

€59.99

Article number: 510003918 Product: 1:24 Curtainside Trailer Model Dim.: 58,0 cm TRACTOR NOT INCLUDED IN THE BOX SUPER DELAS SHEET with tractor decals included NEW WHEELS During the last few years the Curtainside became more and more the standard trailer for various freight transport. Due Due to the possibility to slide the canvas sides, it is easy to load and unload merchandise. Our model represent a 3-axle trailer with frame protection and solid tail gates, as it is generally used all over Europe.

Model trucks

1:24 DAF 95 Master Truck Tractor Tr.

€59.99

Article number: 510000788 Product: 1:24 DAF 95 Master Truck ZgM The 'Concept 95/380' has been, for some time, the flagship product in the renowned DAF manufacturer's lineup, representing a further development of the Space Cab series. It was recognized by the market as a significant evolution compared to its predecessors. Indeed, numerous technical and aesthetic improvements were developed and adopted, greatly appreciated by users of road industrial vehicles, especially for long-haul journeys. The soundproof cabin and advanced shock absorbers for the time provided top-of-the-market onboard comfort, and the powerful 6-cylinder ATI (Advanced Turbo Intercooling) engine ensured good performance with a particular focus on operating costs.   Warning! Not suitable for children under 14 years.

Model trucks

1:24 DAF XF105

€74.99

Article number: 510003917 Product: 1/24 DAF XF105 Model Dim.: 24,5 cm SUPER DECALS SHEET - ADHESIVE STENCIL - NEW CHROMED WHEELS - NEW TYRES This road haulage tractor by DAF is a restyled version of the successful previous series. Offering excellent reliability and a good standard of comfort on long-haul routes, the XF105 also features very good mechanical reliability and outstanding tengine performance under a wide range of conditions, in full compliance with the strictest environmental standards. Also, in the event of an accident, the cab provides the driver with an extremely high level of protection. The name "Smoky" comes from the race horse owned by the driver father (from here "Junior") which, used to winning, during the race was disappearing like a puff of smoke in front of his opponents. In a Wild West atmosphere, the horses are the protagonists in the airbrushed sides of his DAF XF 105 too.

Trailers & accessories

1:24 Dumper Trailer

€57.99

Article number: 510003845 Product: 1:24 Dumper Trailer Mod.Dim.: 37,0 cm This great three axis trailer has been developed for earth and building debris transportation within construction sights. Equipped with high resistant steel chasse, it is capable to support stress on unpaved working areas. Characterized by a large tipping bucket capable of several tons payload. This trailer has installed with an efficient braking system enabling to guarantee maximum safety during transportation. It is further has a bucket covering system to eliminate loss of material risks while moving.

Trailers & accessories

1:24 European Tractors TYRES and RIMS

€26.49

Article number: 510003909 Product: 1:24 European Tractors TYRES and RIMS 100% NEW MOULDS - DECALS SHEET INCLUDED Accessories suitable for European tractors only. THE BOX CONTAINS 7 TYRES + 7 RIMS : 2 front rims and tyres size 385/65 R22.5 - 5 rear rims and tyres size 315/80 R22.5 Deatailed plastic kit of European Tractors TYRES and RIMS in scale 1:24

Model car kit

1:24 Fiat 131 Abarth Rally OLIO FIAT

€39.99

Article number: 510003667 Product: 1:24 Fiat 131 Abarth Rally OLIO FIAT The Fiat 131 Abarth evolved from the initial two-door sedan model. The Abarth development involved many interventions such as the adoption of a lighter chassis, larger wheel mudguards, air intakes on the bonnet and on the sides to optimize the mechanical cooling system. The Fiat 131 Abarth used an in-line front longitudinal 4-cylinder engine with a light alloy head and 4 valves per cylinder. Initial manufacturing began in 1976 leading to participation in the World Rally Championship where it won three constructors' championships, a FIA Drivers' Cup and a drivers' championship. It took part in international competitions until 1982 when it was replaced by Lancia brand cars. Some of its body liveries, associated with the sponsors of the period, have become iconic in the history of "off road" motor racing competitions. Detailed plastic kit in scale 1:32

Model car kit

1:24 Ford Escort Mk.II

€36.99

Article number: 510103655 Product: 1:24 Ford Escort Mk.II Model Dim.: 16,7 cm The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. The product range was wide, declined in three Body styles (2 doors, 4 doors and 3 doors station wagon), five type of engines and a significant variety of settings and configurations. The Escort Mk 2 was mainly produced in the Ford Group German plants and achieved a good commercial success. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive Sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Detailed Plastic Kit of model Ford Escort Mk.II in scale 1:24

Model car kit

1:24 Ford Escort RS 1800 MK.II Lombard

€36.99

Article number: 510003650 Product: 1:24 Ford Escort RS 1800 MK.II Lombard Model Dim.: 16,7 cm EXTRA CATALOGUE SUPER DECALS SHEET The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Successful results has been achieved. From 1975 to 1979 the Ford Escort RS 1800 won for five consecutive years the prestigious RAC (Royal Automobile Club) Rally, the most important rally event organized in the United Kingdom and an important milestone of the World Rally Championship. Among the others the team Mikkola Hannu - Hertz Arnee won the "Lombard" on 1978 and 1979 Detailed Plastic Kit of model Ford Escort RS 1800 MK.II Lombard RAC Rally in scale 1:24

Model car kit

1:24 Ford Escort Zakspeed Gr.2 D&W

€37.99

Article number: 510003664 Product: 1:24 Ford Escort Zakspeed Gr.2 D&W The Ford Escort Mk 2 was launched on the market in 1975. It was a decisive evolution compared to the Escort Mk 1 presented at the 1968 Brussels Motor Show. The previous version retained the high quality mechanics but was completely revised in the design that he interpreted the aesthetic and stylistic taste of the 70s. In addition to the more functional versions, there was also an Escort Sport version characterized by a more aggressive look and a markedly sporty interior. Finally, the RS 1800 version with 115 HP twin-shaft engine was also presented, which formed the basis for the special version used in the Rally world championship and which achieved significant results. The iconic Zakspeed Team built and used a dedicated version of the Escort Mk 2 between 1977 and 1978. Detailed plastic kit in scale 1:24

Model trucks

1:24 Freightliner FLC

€59.99

Article number: 510003859 Product: 1/24 Freightliner FLC Mod.Dim.: 32,5 cm This more than 50 year old US-truck manufacturing company has an excellent reputation for quality and beautiful design of their products. In 1981 Daimler-Benz AG, the parent company of Mercedes-Benz, one of the worlds biggest truck manufacturers, purchases the Freightliner Corporation. The company will continue all activities under the original Freightliner name. Daimler-Benz has also imported several models to Europe for demonstration purposes and truck shows. All Freightliner trucks have a common basic technical design, many are custom-built to the customers needs. The model is a Conventional FLC 12064T Tractor with a 475 HP Cummins-Diesel engine and a 13 speed Fuller-Roadranger Transmission.

Model trucks

1:24 Freightliner Heavy Dumper Truck

€67.99

The renowned US Portland based company "Freightliner Trucks", which operates in the industrial vehicle sector and is owned by the automotive giant Daimler, is mainly known for being one of the key manufacturers of trucks used for "on road" transportation roles. However, it is also important to recognise the versatility and success over time, of those Freightliners that were dedicated to "heavy duties" jobs. In fact, market demand for "quarry and construction" vehicles saw strong growth in the late 1970s and early 1980s, subsequently impacting the production volumes of the main truck and heavy vehicle manufacturers. Freightliner designers have worked on the most suitable technical solutions to meet the needs of the construction market, namely, reinforced chassis and rear axles for greater payload, tough and sturdy tipping rear decks, optimized engines and transmissions for demanding loads and steep slopes.

Model trucks

1:24 Iveco HI-WY E5 "Abarth"

€69.99

Article number: 510003934 Product: 1:24 Iveco HI-WY E5 "Abarth" Model Dim.: 25,4 cm SUPER DECALS SHEET FOR 2 VERSIONS - CHROMED ADHESIVE - CHROMED WHEEL RIMS - NEW TYRES - COLOR INSTRUCTION SHEET The Stralis Hi-Way is the latest evolution of the famous heavy duties truck produced by Iveco. The Stralis Hi-Way is characterized by several technological and aesthetic improvements compared to previous versions. The cabin offers a completely new design and is equipped with integrated electronic systems able to optimize the on-board comfort and to provide the highest safety standard. The evolution of the Stralis is also characterized by a completely new "powertrain" able to minimize the fuel consumption and the maintenance costs. The new engine strength is in fact to stay in line with the new Euro 5 anti-pollution regulation and to keep a very high operation effectiveness in terms of cost of ownership. In 2013 Iveco Stralis Hi-Way won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines. On 2017 Iveco announced that has supplied a Stralis Hi-Way, characterized by a dedicated livery, to Abarth Racing Team to support the logistic of the famous Italian sport brand. Detailed Plastic Kit of model Iveco HI-WY E5 "Abarth" in scale 1:24

Model trucks

1:24 IVECO Turbostar 190.48 Special

€59.99

Article number.: 510003926 Product: 1:24 IVECO Turbostar 190.48 Special The Iveco Turbostar was an important commercial success for Italian manufacturer. Thanks to its characteristics of strength, reliability and performance, it achieved a significant position on the European truck market and it was the most widespread industrial vehicle in Italy in the late 80s.It was declined in numerous versions and adopted several outfitting to satisfy the specific transportation needs of the users. The version with the canvas deck was one of the most common version able to guarantee a great flexibility of transport of all types of goods. Another great advantage of the Iveco 190.42 was the loading capacity compared to the overall dimension. The payload / size ratio provided by 190.42 was an important factor to perform transportation duties outside of the motorways and even in the smaller urban area. Often an hydraulic rear platform to make easier the loading and unloading activities was added to the canvas version. The Turbostar enjoyed considerable commercial success thanks to the two-axle "road tractor" version, a feature which became a reference point for road transport in the 1980s. The wide range of engines available also ensured that the vehicle performed it’s industry tasks exceptionally well over all distances. Among the many versions produced, the famous 190.48 was equipped with a powerful 480 HP engine which delivered impressive performance levels. Detailed plastic kit in scale 1:24

Model tanks

1:24 Jeep Willys MB 80th Anniversary

€37.99

Article number: 510003635 Product: 1:24 Willys Jeep MB "80th Anniversary" In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multipurpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II. Even after 80 years, the "Willys" is still considered today, to be the four-wheeled vehicle which is most symbolic of the American army during the Second World War, and thanks to its enthusiasts and collectors, there are many examples of the jeep, still in perfect working order. Detailed plastic kit

Model car kit

1:24 Lamborghini Diabolo

€34.99

Article number: 510103685 Product: 1:24 Lamborghini Diabolo Model Dim.: 18,6 cm The Diablo was produced between 1990 and 2001. During this period, Lamborghini introduced several variations of the Diablo concept, the first being the Diablo VT (Visco Traction), which featured an all-wheel drive. The Diablo was destined to become the worthy heir of the renowned Miura and Countach. This newsupercar was wide, low and futuristic. And just like its predecessors, the Diablo soon became a favorite among car enthusiasts across the world. The Diablo models helped build the legend of Lamborghini and sold well. Almost 3,000 units across all series and variations found their buyers in those eleven years of evolution. The Lamborghini bosses had wished for a maximum speed of at least 320 kph, and the engineers made this wish come true: With a top speed of 325 kph and an acceleration from 0-100 in 4.5 seconds the Diablo claimed the pole position in the super sports cars segment. It delivered its power via a rear-wheel drive and came with a newly developed V12 engine. Four valves per cylinder, a computer controlled multi-point fuel injection and a displacement of 5.7 liters helped produce a maximum of 492 HP. Detailed plastic kit

Model car kit

1:24 Lancia HF Integrale

€36.99

Article number: 510003658 Product: 1:24 Lancia HF Integrale Model Dim.: 16,0 cm COLOR INSTRUCTION SHEET The Lancia Delta HF four wheels-drive is considered an Icon of the Rally Competitions History. The Delta HF was produced in the second half of the 80s and participated in the World Rally Championship from 1987 to 1988 winning two world titles and achieving important results in a lot of competition as the Rallye de Monte-Carlo and the Rallye San Remo. The Lancia Delta Integrale was the evolution of the Delta HF. It was introduced in 1988 and dominated the World Rally Championship winning several constructors’ championship and an impressive number of competitions up to 1993. Updated in many aesthetic details that made it more muscular and aggressive, as the enlarged fenders and the new designed air intake on the engine bonnet, the Lancia HF Integrale was also improved in driving and engine performance. The 1995 cm3 turbocharged engine increased its power up to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and early 90s, bringing many famous pilots as Miki Biasion or Juha Kankkunen to victory. Detailed Plastic Kit of model Lancia HF Integrale in scale 1:24

Model car kit

1:24 Land Rover Fire Truck

€37.99

Article number: 510003660 Product: 1/24 Land Rover Fire Truck Length of the model 185 mm New Parts The "Land Rover" was certainly one of the most famous symbols of "Made in England" automobile production and is a real milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes realized on 1947. It has been characterized by the 4x4 traction system and by a robust and reliable design able to tackle the most difficult and challenging trails. The aluminum body provide lightness but, at the same time, more resistance against corrosions and more durable in time. In 1971, when the III Series was introduced, more than 1,000,000 of Land Rovers has been produced. Available in two versions: the "standard " one and the "long wheel base". Thanks to its extraordinary versatility was used in both military and civilian duties. Interesting the versions realized for the Fire Departments and made with the firefighting equipment. Detailed Plastic Kit

Model trucks

1:24 M-B Actros MP4 Show GigaSpace

€74.99

Article number: 510003935 Product: 1/24 M-B Actros MP4 Show GigaSpace Length of the model 269 mm NEW CHROMED PARTS SUPER DECALS SHEET Actros is the commercial name for Mercedes-Benz heavy truck range. The Actros range has been introduced in 1995 and quickly achieved a significant commercial success as a suitable solution to perform long-distance haulage and heavy-duties haulage. The New Actros, introduced on the market in 2012, is the most update and innovative expression of the heavy truck Mercedes family. It is characterised by an advanced and modern design and the adoption of new Euro 5 and Euro 6 engines. The vehicle configuration has been designed and developed to guarantee the highest operational efficiency minimising the running costs. Among the several configurations available it is particularly interesting the long-haul high-roof cabin version, design to offer the highest standard of comfort on board for two drivers. The Actros is also a good starting base to create fantastic ShowTrucks with liveries and graphics characterized by a high visual impact that are real masterpieces on wheels. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Model trucks

1:24 MAN F8 19.321 2Achs

€61.99

Article number: 510003946 Product: 1:24 MAN F8 19.321 2Achs Model Dim.: 25,5 cm COLOR INSTRUCTIONS SHEET The F8, produced by the famous German manufacturer MAN, achieved important commercial results on the truck market. It was characterized by the successful union of the reliable "made in Germany" powertrain with the cabin designed and produced in France by Saviem. Generally it was equipped with a longitudinal 6-cylinders frontal engine and it was produced from the late sixties until the mid-eighties and can be considered a real icon of commercial and industrial vehicles of those years. Its great diffusion and flexibility generated the development of numerous chassis configurations and a lot of dedicated outfits. The 19.321 two-axle road tractor can be considered one of the most versatile models and has been used in various logistics and goods handling and transportation activities. Detailed plastic kit in scale 1:24

Model trucks

1:24 MAN TGX XXL D38

€59.99

Article number: 510003959 Product: 1:24 MAN TGX XXL D38 The MAN TGX XXL has been acclaimed by the commercial and industrial vehicle sector for both its stylishness and also for its "character", which provides a combination of driving comfort, reliability and profitability. An aerodynamic profile reduces fuel consumption and optimizes vehicle efficiency. The XXL cabin features maximum on-board comfort and has been designed to be an integral feature of long-haul international transport activities. The range of engines available was developed to minimize consumption, reduce running costs and guarantee a longer operating life. An additional step forward was taken by MAN with the introduction of the new line of reliable 6-cylinder D38 diesel engines, which delivered up to 640 HP and released a maximum torque of 3,000 Nm, improving the engine's performance in all weather conditions.

Model trucks

1:24 MAN TGX XXL D38 E6 Edition

€62.99

Article number: 510003916 Product: 1:24 MAN TGX XXL D38 E6 Edition Model Dim.: 25,7 cm UPGRADED MOULDS An interesting version of the famous German heavy truck characterized by an impressive, in perfect synergy with the design of the cabin, Arctic livery. The MAN TGX XXL is recognized by the commercial and industrial vehicles market as a reference point for its style and its personality. The development of the truck has been done taking in consideration the effectiveness and the performance in long range duties. The aerodynamic design of the truck is able to minimize the fuel consumption. Furthermore The XXL cabin offers maximum comfort on board and it can be considered an ideal solution for international long haul commercial activities. The range of engines has been developed to minimize the running and operating costs and ensure a longer working life. Detailed Plastic Kit of model MAN TGX XXL D38 E6 Edition in scale 1:24

Model car kit

1:24 Mercedes 450 SLC Rally d Bandama'79

€37.99

Article number: 510003632 Product: 1:24 Mercedes 450 SLC Rally d Bandama'79 Model Dim.: 19,8 cm Super Decals Sheet The Mercedes SLC is a luxury coupe produced by the German car manufacturer between 1971 and the early 1980’s. Its development was based upon the earlier launched Roadster model and was characterized by a harmonious and elegant design. The 450 SLC was equipped with a 4520 cm3 V8 engine capable of 225 HP. This high performance was successfully combined with refined styling and the ‘Premium’ quality furnishings selected for the vehicle interior that reinforced the SLC luxury branding in the marketplace. The vehicle was further adapted from the mainstream consumer model to the production of a sports version for car rallying competitions. The chassis was the same, but the rally version introduced a roll-bar, competition rims and aluminium parts and components to reduce the overall weight. All of these factors contributed to increased performance and rallying successes such as the Mintex Rally victory in 1978. Detailed Plastic Kit

Model car kit

1:24 Mercedes Benz 300 SL Gull Wing

€35.99

Article number: 510003645 Product: 1:24 Mercedes Benz 300 SL Gull Wing Length of the model 148 mm The Mercedes-Benz 300 SL was produced in 1954 by the German car manufacturer and it’s a masterpiece on four-wheels for design, elegance and luxury. The 300 SL, where the acronym stands for Sport Leicht, (Sport Light), adopted innovative solutions for the time. The Mercedes 2 door coupe had a tubular frame, a front 2.996 cc longitudinal engine connected to a 4-speed transmission and the rear drive. The maximum speed of 300 SL was 260 Km/h (162 mph). The real strength of the car, however, was in its innovative design and the adoption of the characteristic and eye-catching Gull-wing doors. Even today the Mercedes-Benz 300 SL is an icon of design and style of the period ant it is a real icon for collectors and fans. Detailed Plastic Kit

Model car kit

1:24 Mercedes Benz 540K

€29.99

Article number: 510003701 Product: 1/24 Mercedes Benz 540K The model Mercedes Benz 540K in 1/24 scale has a length of about 243 mm. One of the most beautiful automobiles of its time, the Mercedes Benz 540K was built from 1936-39. One unit is still shown in various parts of the world by Mercedes for promotion purposes. The car had a 8-cylinder 5.4 l engine and weighed no less than 2300 kg. Maximum speed was a stunning 170 km/h. Its fuel consumption was 28 to 30 liter for 100 km.

Model trucks

1:24 Mercedes Benz Actros MP4 Gigaspace

€69.99

Article number: 510003905 Product: 1:24 Mercedes Benz Actros MP4 Gigaspace Model Dim.: 25,5 cm 100% NEW MOULDS - TWO VERSIONS DECALS - NEW WHEELS - NEW RUBBER TYRES Actros is the commercial name for Mercedes-Benz heavy truck range. The Actros range has been introduced in 1995 and quickly achieved a significant commercial success as a suitable solution to perform longdistance haulage and heavy-duties haulage. The New Actros, introduced on the market in 2012, is the most update and innovative expression of the heavy truck Mercedes family. It is characterized by an advanced and modern design and the adoption of new Euro 5 and Euro 6 engines. The vehicle configuration has been designed and developed to guarantee the highest operational efficiency minimizing the running costs. Among the several configurations available it is particularly interesting the "GigaSpace", long-haul high-roof cabin version, design to offer the highest standard of comfort on board for two drivers. Thanks to its features, Actros Gigaspace can be considered one the best solution for international long-distance transport activities. Detailed Plastic Kit of model Mercedes Benz Actros MP4 Gigaspace in scale 1:24   Warning! Not suitable for children under 14 years.

Model trucks

1:24 Mercedes Benz SK Eurocab 6x4

€59.99

Article number: 510003924 Product: 1:24 Mercedes Benz SK Eurocab 6x4 Length of the model 270 mm The Mercedes-Benz SK (Schwere Klasse) was produced by the renowned German automotive company from the late 1980s to the early 1990s. Available in various configurations, including the esteemed 6x4 chassis, which was enhanced by the introduction of the "Eurocab" cabin, featuring innovative and functional design elements. This cabin was characterized by a raised roof, improving onboard amenities, visibility, and driving comfort. Initially introduced on the 500 HP engine version, the new cabin was progressively extended to the rest of the lineup. Despite its increased height, fuel consumption costs were mitigated through meticulous aerodynamic research. It found extensive use in numerous commercial and industrial applications, enjoying significant commercial success. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Model trucks

1:24 Mercedes-Benz 2238 6x4

€56.99

Article number: 510003943 Product: 1/24 Mercedes-Benz 2238 6x4 NEW DECAL SHEET The truck 2238 S 6 x 4 has been, for long time, the reference point for heavy duties on long range of Mercedes. The truck had both rear axles driven and a total of 375 horsepower. It was one of the heaviest Mercedes long distance truck and it had established new dimensions in international long distance traffic. The features of the engine OM422 allowed a particularly economic driving. The gear changes was reduced to a minimum, thus guaranteeing very smooth driving. It achieved a good commercial success all over the world. It’s reliable chassis was a platform to develop customization and dedicated versions for specific needs. It can be considered a starting point for the development of the next generations of road vehicles. Detailed Plastic Kit

Model trucks

1:24 Peterbilt 378 "Long Hauler"

€62.99

Article number: 510003857 Product: 1:24 Peterbilt 378 "Long Hauler" Mod.Dim.: 32,2 cm The Peterbilt model 378 represents one of the classic style US Trucks. Inside the 378 cab are highback seats and an ergonomically designed dashboard. The 378 could be ordered in many configurations from over the road tractor to a heavy hauler. Our model 378 features a 420HP Detroit Diesel engine. The sloped fiberglass hood tilts 90 degrees for full access to the engine. Our model features dual exhaust, twin chromed air cleaners, deep taper bumper and Peterbilt style wheels.

Model car kit

1:24 Porsche 935 Baby

€37.99

Article number: 510003639 Product: 1:24 Porsche 935 Baby Model Dim.: 19,6 cm SUPER DECALS SHEET To compete in the FIA-Group 5 car competitions, Porsche developed a special car line characterized by dedicated engine and chassis solutions, beginning with the production of the famous 911 Turbo. Several versions of this model were made, but one of the most famous was the Porsche 935J. The "Baby" as it was known, was built to compete in the 2.0-liter German national championship. The car used a 1.425 air-cooled engine with a power performance of 261Kw. The Porsche 935J achieved an important victory in the 1977 German Grand Prix held in Hockenheim, that proved its excellent engine performance and design features. Detailed plastic kit in scale 1:24

Trailers & accessories

1:24 Reefer Trailer

€62.99

Article number: 510103904 Product: 1:24 Reefer Trailer Model Dim.: 58,7 cm NEW WHEELS This latest-generation semitrailer is representative of much of Europe’s on-road haulage vehicles. Featuring an efficient braking system, side impact protection, a considerable load capacity, these trailers are used extensively and are produced by at least ten or so specialised companies, which provide a comprehensive range of variants to meet the specific needs of individual customers. Detailed Plastic Kit of model Reefer Trailer in scale 1:24

Model car kit

1:24 Renault R5 Rally

€36.99

Article number: 510103652 Product: 1:24 Renault R5 Rally Model Dim.: 16,7 cm For the 1977 Rally season the French company Renault developed a racing version of the popular small R5. In spite of the fact that this car was designed for very different scopes, after adequate preparation, the French technicians managed to obtain notable power from the engine: 150CV, and a noteworthy drive ration, which thanks to the contained weight of only 800 Kg. made the R5 a very manoeuvrable and fast car. The R5 obtained great results in the Sanremo and Montecarlo Rallies in 1978 and successively gratifying results in the Acropolis Rally and in Africa. Detailed Plastic Kit of model Renauls R5 Rally in scale 1:24

Model car kit

1:24 Rolls Royce Phantom II

€32.99

Article number: 510003703 Product: 1/24 Rolls Royce Phantom II The model Rolls Royce Phantom II in 1/24 scale has a length of about 235 mm. The Rolls-Royce Phantom II was introduced in 1929. With this new model the tradition of the manufacturer was continued: To build beautiful and expensive cars. Each body was made to order of each customer. Our model belongs to the P-2 series, which was built in 1934. The original, from which this model, was copied, can still be found in the famous Stratford Motor Museum in England.

Model trucks

1:24 Scania 143M 500 Streamline 4x2

€59.99

Article number: 510003950 Product: 1:24 Scania 143M 500 Streamline 4x2 The Scania R143 M Streamline was an iconic benchmark in the production lines of the famous Scandinavian manufacturer, which achieved considerable commercial success in various European and non-European markets between the end of the 1980s and the mid-1990s. The Scania R143M was assembled at the Södertälje production site in Sweden and was one of the most successful models of the "series 3", first introduced by Scania in 1987 and following on from the innovative "series 2" of the 1980s. Powerful and reliable thanks to its 500 horsepower V-8 engine, it was designed with the most advanced technologies of the time. Great attention was paid to its design to reduce aerodynamic resistance and minimize fuel consumption, an important factor for success in using heavy transport over long distances. Scania's tractor unit, with its two-wheel drive configuration, was also acclaimed for its ease of maintenance and low operating and management costs.

Model trucks

1:24 Scania 164L Topclass

€70.99

Article number: 510003922 Product: 1:24 Scania 164L Topclass Model Dim.: 24,2 cm SUPER DECALS SHEET FOR 2 VERSIONS - ADHESIVE STENCIL - NEW TYRES - ADDITIONAL CHROMED PARTS AND WHEEL RIMS The Scania 164 has been a reference point of heavy commercial vehicles from the latest part of ‘90s to the first half of the following decade. It was the spearhead of the "Series 4" and it achieved a significant commercial success in a lot of Countries all over the World. The 16-litre engine was able to guarantee power and reliability minimizing, at the same time, the running costs. The 164L "Top Class" was characterized by the highest level of comfort on board either in running conditions or during the rest and parking. The design and the development of the vehicle was able to enhance the active and passive safety. Not least the aerodynamic restyling allowed to have an optimization in fuel consumption even at the high speed. Detailed Plastic Kit of model Scania 164L Topclass in scale 1:24

Model trucks

1:24 Scania 770 S V8 "White Cab"

€71.99

Article number: 510003965 Product: 1:24 Scania 770 S V8 "White Cab" Scania S series – a key player in the industrial and heavy commercial vehicles market – has been designed to meet long-range logistics and transportation needs. The new S series was introduced by the famous Scandinavian manufacturer to the market in 2016, and included new innovative design solutions. Key design features were incorporated to optimize the use of the space inside the cabin to enhance driver comfort, and greater attention was afforded to more modern ‘active and passive’ safety systems to aid driver control and overall vehicle management. The attractive and contemporary new design also reflected the modern aerodynamics of the vehicle and its reduced fuel consumption targets. The Scania S770 4x2 with compact cab and the "Highline" version with the oversized cab, are the industry ‘road tractors’ produced by the famous Scandanavian manufacturer of heavy commercial vehicles, with both versions offering excellent options for differing professional and operational requirements.   Warning! Not suitable for children under 14 years.

Model trucks

1:24 Scania R400 Streamline (Flat Roof)

€61.99

Article number: 510003947 Product: 1:24 Scania R400 Streamline (Flat Roof) Length of the model 247 mm DECALS SHEET FOR 2 VERSIONS The Scania R-series Streamline is designed to meet the highest demands in terms of fuel economy, driver comfort and reliability. The unique style of the exterior is combined with new exceptional interiors offer exceptional driver comfort and a wide range of choices of colors and materials. Available with both V8 engines and online. Robust, responsive and efficient, the Scania V8 engines are built to carry out the toughest jobs. Our model is also completed by a decals sheet and an accurate sheet of metallic adhesive, already ready for the application, for a correct finishing of the tractor vehicle, exactly as in the real. Detailed Plastic Kit of model

Model trucks

1:24 SCANIA R730 Streamline "Chimera"

€70.99

Article number: 510003930 Product: 1:24 SCANIA R730 Streamline "Chimera" Model Dim.: 24,7 cm SUPER DECALS SHEET FOR 2 VERSIONS - ADHESIVE STENCIL - NEW TYRES - CHROMED WHEEL RIMS The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the current world market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series Streamline version, produced in 2013, is designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road and is considered the number one for "SHOW TRUCKS", the famous decorated tractors. The extraordinary exterior style is matched with exclusive new interiors which provide exceptional comfort for the driver and a wide range of color and material options. Our model reproduce in 1:24 scale the tractor created by the well-known Swedish company SVEMPAS AB, for the technical assistance of the tractor in the racing version called SCANIA "CHIMERA". Detailed Plastic Kit of model SCANIA R730 Streamline "Chimera" in scale 1:24

Model trucks

1:24 Scania R730 Streamline 4x2

€71.99

Article number: 510003906 Product: 1/24 SCANIA R730 STREAMLINE 4x2 Model Dim.: 24,7 cm UPGRADE MOULDS - SUPER DECALS FOR 2 VERSIONS - SUPER CROMED ADHESIVE - ADDITIONAL CROMED PARTS The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the current world market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series is designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road and is considered the number one for "SHOW TRUCKS", the famous decorated tractors. The extraordinary exterior style is matched with exclusive new interiors which provide exceptional comfort for the driver and a wide range of colour and material options. In addition, our tractor model is finished with fantastic decals and metallised stickers ready to be applied. The packaging also contains new chromed plastic parts that give the model a realistic appearance. Detailed Plastic Kit of model "Scania R730 Streamline 4x2" in scale 1:24

Model trucks

1:24 SCANIA R730 Streamline Highline Cab

€58.99

Article number: 510003932 Product: 1:24 SCANIA R730 Streamline Highline Cab Model Dim.: 24,7 cm SUPER DECALS SHEET The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the recent World market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series Streamline version, produced in 2013, was designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road The continuous evolution of the cabin allowed to reach the highest levels of driving comfort and habitability even in the most demanding long-haul commercial Transport activities. Detailed Plastic Kit of model SCANIA R730 Streamline - Highline Cab in scale 1:24

Model trucks

1:24 Scania R730 V8 Black Amber

€69.99

Article number: 510003897 Product: 1:24 Scania R730 V8 Black Amber Model Dim.: 24,7 cm With special Amber Metallic acrylic paint 30ml included. In 2011, a new link was added to the prestigious chain of limited editions launched by Scania (TOP CLASS in 2002, THE KING in 2003, THE GRIFFIN in 2006, BLUE SHARK in 2008 and DARK DIAMOND in 2009) and created in partnership with "SVEMPAS AB", the famous Swedish truck manufacturer Sven Erik "Svempa" Bergendahl. The top of the range, or the road tractor R 730 LA4x2MNA Euro 5 V8 engine, the dream of many drivers and transport operators, is equipped with the most exclusive technical features and further enhanced with an exclusive range of accessories and special finishes. The most characteristic feature is the CR19 TOPLINE cabin in the TITANIUM version. Exclusive "Black Amber" metallic paint for the cab and plastic parts. Black Amber silkscreen with elegant flame pattern in carbon black with clear amber outline, ESP, LED brake lights on spoiler, xenon headlights in the sun visor and side lights integrated with the running boards, unique decorations outside cabin and side skirts, front instrument panel and steering wheel covered with leather, 22" TV/DVD and much more.

Model trucks

1:24 SCANIA S730 Highline 4x2

€84.99

Article number: 510003927 Product: 1:24 SCANIA S730 Highline 4x2 Scania's S series is a benchmark on the market for heavy commercial and industrial vehicles designed to meet the needs of long-haul logistics and transport. The new S series was introduced by the famous Scandinavian manufacturer on the market in the second half of the last decade by adopting innovative design solutions. The new project was in fact created to optimize the use of the spaces inside the cabin and enhance the driver's comfort. Great attention to active and passive safety through the adoption of the most modern control and driver assistance systems. The new design, attractive and modern, was also created to take into account the aerodynamics of the vehicle and the reduction in fuel consumption. An important "success factor" of the Scania tractor is in fact operating efficiency, minimization of consumption and attention to emissions. The "Highline" version with the larger cabin further amplifies the vocation of the "S" line to fulfill long-distance transport and logistics commitments. Detailed plastic kit in scale 1:32

Trailers & accessories

1:24 Tecnokar Trailer w/ 20ft Tank

€62.99

Article number: 510003929 Product: 1:24 Tecnokar Trailer w/ 20ft Tank Model Dim.: 28,8 cm NEW MOULDS - CONTAINS PHOTO-ETCHED FRET The 20" Tecnokar Tank trailer is designed to ensure the highest level of efficiency in the liquid and fluid transport. The sturdy steel frame, on a three-axle system, made by the Italian Company, is able to load a 20" tank ideal to be used in the container intermodal logistic. It can well satisfy the need of complex and integrated logistic companies that adopting intermodal transport solution of liquid goods. That’s more and more important taking in consideration that, in the recent years, the intermodal transport solution of liquids, especially the liquids destined to the food industry, is a "must have" to guarantee reliability and respect of the delivery time. Detailed Plastic Kit of model Tecnokar Trailer w/ 20ft Tank in scale 1:24

Trailers & accessories

1:24 Timber Trailer

€57.99

Article number: 510003868 Product: 1:24 Timber Trailer Mod.Dim.: 56 cm This trailer is especially designed for the transportation of logs and timber. It has a sturdy frame with wheels equipped with a complex three-axle shock absorber reinforced to accommodate heavy loads. Along the loading platform a series of extensible structures are in place to hold trunks of various sizes. These trailers are very popular in Europe and are combined with heavy tractors with two or three axes.

Trailers & accessories

1:24 Truck Accessories II

€32.99

Trailers & accessories

1:24 Truck Accessories Set

€35.99

Detailed plastic kit

Trailers & accessories

1:24 Truck Shop Accessories

€29.99

OVER 40 DIFFERENT ACCESSORIES FOR TRUCK MODELS SUPER DECALS SHEET & CHROMED PARTS INCLUDED Our accessory set 764 gives you the possibility of beefing up your truck kits with additional exhaust pipes, chrome-plated parts, with bull bars, spoilers, name plates, additional head lights and puppets as well as tools and other items. Our kit also includes two figures to make your truck complete. A big decal with many symbols and colour stripes enables you to decorate your trucks in the way you see them on the road today.

Model trucks

1:24 U.S. Superliner Power Truck

€62.99

Article number: 510003820 Product: 1/24 U.S. Superliner Power Truck Model Dim.: 35,22 cm This large tractor is representative of many trucks used in the USA. Equipped with powerful engines and very large fuel tanks, these vehicles travel hundreds of miles at a time from one State to another. Characterised by large drive cabs with in-built sleeping facilities and every other possible comfort, they are, for their American drivers, a true home from home. Numerous on the road movies have succeeded in making this category even more popular.

Model trucks

1:24 US CLASSIC WESTERN STAR

€59.99

Article number: 510003915 Product: 1:24 US CLASSIC WESTERN STAR Model Dim.: 34,0 cm SUPER DECALS SHEET The Western Star started to design and to build industrial vehicles in 1967. Since the beginning the Western Star product line up was a good synthesis, for its features, of the "ideal" American heavy truck. In particular the trucks dedicate to perform the highway transportation duties are still the reference point in the Western Star range. The American manufacturer is specialised in "tailor made", in terms of engines, gearboxes and frames, and customised trucks in order to meet the specific customers needs. However the customisation doesn’t stop to the technical configuration made by the factory. Most of time the passionate drivers used to equip their trucks with a wide adoption of accessories and chromed parts that make them unique and authentic "masterpieces" on wheels. Deatailed plastic kit of model US CLASSIC WESTERN STAR in scale 1:24

Model trucks

1:24 US Wrecker Truck

€69.99

Article number: 510003825 Product: 1:24 US Wrecker Truck Mod.Dim.: 34,5 cm Every year, more and more goods trucks roll onto the roads of the United States: inevitably, this has led to an increase in the number of vehicles designed to handle truck breakdowns. These breakdown vehicles – nothing less than true mobile workshops – are a common sight along the roads of this immense country. Numerous compartments on the flanks of the vehicle contain all the materials and tools needed for the fast repair of damaged trucks; moreover, the heavy-duty towing gear at the rear of the vehicle allows trucks to be taken to the nearest full-scale workshop when repairs cannot be completed at the roadside.

Model car kit

1:24 Volvo 760 GLE

€35.99

Article number: 510003623 Product: 1:48 Aermacchi MB 326 During the 1980s, Volvo’s 700 series was at the forefront of their auto production lines. First introduced in 1982, it was characterized by great attention to detail and a high level of finish, consistent with the "premium" positioning it strived for within both the European and US markets. The first model to be released was the Volvo 760. Available initially in a sedan configuration, it was noteworthy in design terms for its clean, square lines and a vertical rear window. The "powertrain" as it was known, was available with one of two 6-cylinder engines, the petrol injection with a V layout and a displacement of 2,849 cm3, and also a 6-cylinder in-line turbodiesel from 2,383 cm3. In 1985 the range expanded with the introduction of the station wagon version which was a notable commercial success in some European markets, in part due to its balance between comfort and versatility. The series engine range was also later expanded with the introduction of a new petrol-powered, turbocharged engine.

Model trucks

1:24 Volvo F-12 Intercooler Low Roof

€62.99

Detailed plastic kit in scale 1:32

Model trucks

1:24 Volvo F16 Plane m. Hebebühne

€69.99

Article number: 510003945 Product: 1:24 Volvo F16 Plane m. Hebebühne Super Decals Sheet Model Dim.: 37,5 cm Introduced to the market in 1988, the Volvo F16 achieved considerable commercial success largely due to its innovative "powertrain" line which was able to achieve a high level of driving performance, low fuel consumption and low running and maintenance costs. The exceptional features of its 6-cylinder engine were complemented by the innovative "Globetrotter" cab which provided exceptional on board comfort. The sturdy frame served as a developmental platform for the creation of numerous specially outfitted versions to meet a wide range of differing customer requirements. One configuration that was particularly appreciated and used by long and medium-range logistics operators was the canvass rear deck. This feature was characterised by good size/space ratios and further enhanced by the rear hydraulic platform which facilitated easy loading and unloading of goods. Detailed plastic kit in scale 1:24

Model trucks

1:24 VOLVO FH Plat Dak

€79.99

Article number: 510003962 Product: 1:24 VOLVO FH Plat Dak The Volvo FH III series represents the pinnacle of construction technology from the renowned brand of commercial and industrial vehicles. Its modern and appealing design has been crafted to optimize aerodynamics and minimize fuel consumption to ensure the highest standards of operational efficiency. The cabin, available in various configurations including the "Low Roof" version, has been designed to offer the highest standards of active and passive safety. Additionally, the vehicle is equipped with modern driver assistance systems and risk prevention features. There are numerous customization options available to tailor the vehicle precisely to specific transportation needs. The "tractor" configuration has been designed to be lightweight and rational, ensuring maximum versatility for any application.   Warning! Not suitable for children under 14 years.

Model trucks

1:24 VOLVO FH16 "Viking"

€71.99

Article number: 510003931 Product: 1:24 VOLVO FH16 "Viking" Model Dim.: 25,0 cm SUPER DECALS SHEET ADDITIONAL CROMED PARTS - NEW TYRES - CHROMED WHEEL RIMS With the new Volvo FH16, Volvo once again offers a truck in the heaviest segment. It is based on the FH Series that was launched in autumn 2001, but it also features new technology that is unique to the Volvo FH16. The new Volvo FH16 is the most powerful, comfortable and safe model ever built by Volvo Trucks. Among the highlights of the new model are an all-new 16-litre engine with a power output of 610 horsepower, an exclusive interior and body features, and an advanced active safety system. The Volvo FH16 Series is built to tackle the toughest transport assignments with high gross vehicle weights and high average speeds in hilly terrain. Detailed Plastic Kit of model VOLVO FH16 "Viking" in scale 1:24   Warning! Not suitable for children under 14 years.

Model trucks

1:24 Volvo FH16 GLOBETROTTER XL

€57.99

The model Volvo FH16 GLOBETROTTER XL in 1/24 scale has a length of about 244 mm. With the new Volvo FH16, Volvo once again offers a truck in the heaviest segment. It is based on the FH Series that was launched in autumn 2001, but it also features new technology that is unique to the Volvo FH16. The new Volvo FH16 is the most powerful, comfortable and safe model ever built by Volvo Trucks. Among the highlights of the new model are an all-new 16-litre engine with a power output of 610 horsepower, an exclusive interior and body features, and an advanced active safety system. The Volvo FH16 Series is built to tackle the toughest transport assignments with high gross vehicle weights and high average speeds in hilly terrain.

Model trucks

1:24 Volvo FH4 Globetrotter /Medium Roof

€78.99

Article number: 510003942 Product: 1:24 Volvo FH4 Globetrotter /Medium Roof Model Dim.: 24,6 cm Upgraded moulds - New parts - New photo-etched fret - Super decals sheet - Additional chromed decals - Chromed adhesive - Colors Instructions sheet The Volvo FH is the highest expression, in terms of development and technology, of the famous commercial and industrial vehicles brand. Its modern and eye-catching design has been made to optimize aerodynamics, to minimize consumption and to ensure the highest standards of operational efficiency. The cabin has been developed to offer the highest active and passive safety standards. The vehicle is also equipped with modern driving assistance and risk prevention systems. There are several possibilities for customizing the vehicle in order to respond promptly and precisely to any kind of transportation needs. The Globetrotter cab (CAB-HSLP) permits comfortable overnight stays for one or two people. Moreover, its vertical structure ensures a large capacity and capability for extra compartments. The internal height is 205cm. With the benefit of leading-edge software solutions the diesel engine of the VOLVO line has a lower impact on the environment and incorporates some of the best practices of cutting-edge technologies.

Model trucks

1:24 Volvo FH4 Globetrotter XL

€74.99

Article number: 510003940 Product: 1:24 Volvo FH4 Globetrotter XL Model Dim.: 24,6 cm 100% New Moulds Fully detailed interiors - Fully detailed engine and frame - Open or closed driver door - Chromed adhesive - Photo etched parts - The Volvo FH is the highest expression, in terms of development and technology, of the famous commercial and industrial vehicles brand. Its modern and eye-catching design has been made to optimize aerodynamics, to minimize consumption and to ensure the highest standards of operational efficiency. The cabin has been developed to offer the highest active and passive safety standards. The vehicle is also equipped with modern driving assistance and risk prevention systems. There are several possibilities for customizing the vehicle in order to respond promptly and precisely to any kind of transportation needs. The Globetrotter XL cabin is the ideal solution to host two people and, thanks to the increased height it offered a better storage capability. The FH4 version is powered with the powerful 6 cylinders Euro 6 13 liters diesel engine. In 2014 Volvo FH4 won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines. Detailed Plastic Kit of model

Model trucks

1:24 Volvo VN 780 Tractor Truck 3Axle

€70.99

Article number: 510003892 Product: 1/24 Volvo VN 780 Tractor Truck 3Axle Model Dim.: 34,5 cm SUPER DECALS SHEET FOR 2 VERSIONS - CHROMED ADHESIVE - CHROMED WHEEL RIMS The new VOLVO VN 780 tractor, an evolution of the NH 12 series, is specifically aimed at the American market, where the previous version has already proved popular and more than capable of competing with traditional US-built trucks.Characterised by a spacious drive cab, with sleeping facilities and every other comfort needed for the long-haul journeys typical of the US market, the vehicle has been completely restyled and the engine improved to contain fuel consumption and reduce emissions.   Warning! Not suitable for children under 14 years.

Model car kit

1:24 VW Golf “POLIZEI”

€36.99

The version used by the German Police during the 1970s and early 1980s was symbolic of everyday life during that period. Detailed plastic kit

Military aeroplane models

1:32 F-104G/S - RF-104G Starfighter

€104.99

Detailed Plastic Kit of model F-104G/S - RF-104G Starfighter - Upgraded Edition with Pod Orpheus in scale 1:32 <   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:32 Lockheed F-35A Lighting II

€109.99

Article number: 510002506 Product: 1:32 Lockheed F-35A Lighting II Model Dim.: 49,0 cm 100% NEW MOULD - SUPER DECALS SHEET FOR 6 VERSIONS - PHOTO ETCHED PARTS - COLOURED INSTRUCTION SHEET AND NEW STICKERS MASKS SHEET The JSF Joint Strike Fighter program was set up to develop a new fifth-generation all-weather multirole combat aircraft a ble to replace the existing United States and NATO strike-fighters. The aerospace industry team led by Lockheed Martin generated the single-seat, single-engine, F-35 Lightning II. It adopts stealth technology and it is characterized by the trapezoidal wings and by the use of the most advanced hi-tech materials and avionic systems. Developed to perform air superiority, close air support and ground attack missions, it has been design in different configurations. The F-35A is the conventional takeoff and landing variant, the F-35B is the short takeoff and vertical landing variant and the F-35C, with foldable-wings, has been developed to be used from conventional deck carriers. Thanks to its operational flexibility, the advanced on-board technology and the impressive project innovation, the F-35 lightning II will be a reference aircraft in the twenty-first century military aviation. Deatailed plastic kit of model Lockheed F-35A Lighting II in scale 1:32

Military aeroplane models

1:32 Macchi MC. 202

€104.99

Article number: 510002518 Product: 1:32 Macchi MC. 202 The introduction of the Macchi MC 202 Folgore was a significant development for the fighter squadrons of the Italian Regia Aeronautica. Stylishly designed from an aerodynamical perspective, it was fitted with the powerful German DB 601 engine produced under license by the Italian aeronautical industry. The engine and overall aeronautical performance of the aircraft provided the Regia Aeronautica with a fighter capable of actively engaging Allied fighters. The flight performance compared to the previous generation of fighters equipped with radial engines, such as the Fiat G-50 and the Macchi Mc-200, was in fact much better. Manoeuvrable and fast (it was able to reach 600 km h), it was armed, in the early versions, with two 12.7 mm Breda-SAFAT machine guns installed in the nose. Only in later versions were the armaments improved with additional machine-guns installed in the wings. Detailed plastic kit in scale 1:32

Military aeroplane models

1:32 Macchi MC.205 Veltro

€104.99

The Macchi M.C. 205 Veltro is considered the best Italian fighter of World War II. The evolution of the "Folgore" retained the excellent aeronautical design of its predecessor and was equipped, like other fighters of the "Series 5", with the German Daimler-Benz DB605 engine. The powerful V12 engine, also produced under license by Fiat, allowed the Veltro to reach a maximum speed of 640 km/h. Fast, maneuverable, and well-armed, with 2 × 12.7 mm machine guns in the nose and 2 × 20 mm cannons in the wings, it was capable of fighting on par with the best Allied fighters of the period, such as the American P-51 Mustang. It entered service with the Regia Aeronautica in the early months of 1943. After the armistice of September 8, it was used, until the end of the conflict, by both the flight units of the Italian Social Republic and those of the Co-Belligerent Air Force. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:32 Tornado GR.4

€144.99

Article number: 510002513 Product: 1:32 Tornado GR.4 Model Dim.: 52,1 cm 100% New Moulds PE Sheet – Rubber tyres & fuselage covers Super Decals Sheet Size of the model 52,1 cm The "Tornado" arose from a collaborative project between Italy, Germany, and the United Kingdom to produce a multi-role high-performance combat aircraft. The primary requirement however was to develop a ‘state of the art’ modern aircraft able to perform low-altitude penetrating strike missions. This need was met by the development of a twin-engine combat aircraft with a variable-sweep wing. The Tornado GR.1 (Ground Attack/Reconnaissance) was the initial version adopted by Royal Air Force in early ‘80s. In 1996 the Tornado was upgraded to the Gr.4 standard which was characterized by improved operational capabilities, new avionics systems for navigation and the adoption of new ‘on-board’ technologies. These systems enabled the effective identification and tracking of targets and the weapons management of the newer generation of weapons such as Paveway IV bombs and Storm Shadow cruise missiles. Detailed plastic kit in scale 1:32

Model tanks

1:35 1/4 Ton 4x4 US Ambulance Vehicle

€11.99

Article number: 510000326 Product: 1:35 1/4 Ton 4x4 US Ambulance Vehicle Model Dim.: 11,8 cm Decals for 2 versions The ubiquitous jeep is perhaps the most all-round vehicle ever constructed. Because it xas ruggedly built and thus able to traverse most types of terrain without suffering structural damage, one of the task assigned to the jeep was that of ambulance service.

Model tanks

1:35 15cm Panzerwerfer 42 auf SWS

€31.99

Article number: 510006562 Product: 1:35 15cm Panzerwerfer 42 auf SWS Length of the model 198 mm NEW DECAL SHEET The Schwerer Wehrmachtschlepper (SWS) was developed as a medium half-track and used to transport supplies to front-line troops or as a towing vehicle for the light artillery. However, on the large rear flat load compartment some other applications have been developed. One modification was the Panzerwerfer 42 auf SWS, a 10 barreled 15 cm Nebelwerfer 42 rocket launched placed over an armored ammunition storage compartment. The rocket launcher, developed as device to create smoke screens, was soon used as real artillery able to launch high-explosive ammunitions. It could shoot the rocktes with impressive and deadly. Detailed Plastic Kit of model 15cm Panzerwerfer 42 auf SWS in scale 1:35

Model tanks

1:35 Bedford QL Truck

€36.99

Article number: 510000241 Product: 1:35 Bedford QL Truck The Bedford QL line of military trucks was established in the late 1930s for the British Army to have a more modern and flexible transport vehicle. Following the conclusion of testing in 1940 and in early 1941, the Bedford QLs were distributed to Army Corps, Regiments and other Units. For the duration of the war it was deployed on various fronts, proving to be a highly effective support vehicle for meeting both logistical and transportation needs due to its four-wheel drive and relatively low weight which further enhanced its load capacity. With its flexibility and robustness, it was also used for towing and transporting artillery pieces such as the 6 pounder anti-tank gun and the 40mm Bofors anti-aircraft gun. Equipped with a 72 horsepower 6-cylinder petrol engine, it was also notable for its ease of maintenance and repair, an important feature on the battlefield. Detailed Plastic Kit

Military ship models

1:35 Biber Midget Submarine

€30.99

Article number: 510005609 Product: 1:35 Biber Midget Submarine The model U-Boot Biber in scale 1/35 has a length of about 186 mm. Decals for one version. The "Biber" was the most well-known "pocket" submarine used by the Kriegsmarine during the latter part of World War II. The development of the Biber was extremely rapid. Design began in February 1944, and the first units were launched just 6 months later. Measuring just 9 meters long, it had a range of 240 km. It could reach a maximum speed of 6.5 knots surfaced and 5.3 knots submerged. The Biber could be armed with two 530 mm torpedoes, mounted externally to the submarine, or with two mines. Its crew consisted of only one person. The purpose of the Biber within the strategy of the Kriegsmarine was quite simple: to provide a concrete defense along the coasts to protect against a possible, and increasingly likely, Allied invasion. From 1944 until the end of World War II, the Kriegsmarine received and deployed over 300 Bibers.

Model tanks

1:35 Brit. Crusader Mk.III w/ Tank crew

€36.99

Article number: 510006592 Product: 1:35 Brit. Crusader Mk.III m. Besatzung Designed at the beginning of the Second World War, the Crusader was one of the most important British "Cruiser" tanks reaching a production of over 5,000 units. Equipped with Christie suspension with large diameter rolling wheels, the Crusader possessed remarkable driving skills on rough terrain. The first versions of Mk. I and Mk. II were armed with a 2 pdr cannon. later replaced by the more powerful 6 pdr cannon. in the Mk.III version. Lacking adequate armor against enemy fire, it was also very vulnerable to enemy mines and anti-tank guns, and its armament was often inadequate in front of similar German vehicles. However, when used in a coordinated way, they managed to achieve good results. Detailed plastic kit

Model tanks

1:35 Carro Armato P40

€36.99

Article number: 510006599 Product: 1:35 Carro Armato P40 The early years of WW2 highlighted the inadequacies of Italian medium tanks in modern warfare, which was now characterized by clashes between heavily armed and heavily armored tanks, and also by the use of more effective and lethal anti-tank weapons. Following detailed analysis of German and wartime opponents British and Soviet military vehicles, a 26 ton heavy tank was created. This new tank, which underwent several design changes over time, incorporated more modern features such as inclined front plates, a more powerful and better performing 420 HP diesel engine and a more suitable main armament, the 75/34 Ansaldo gun. The P26/40 as it would forever be known, unfortunately retained some obsolescent features that were characteristic of Italian armoured vehicle production from the mid 1930s, namely the armor plate riveting snd the leaf spring suspension system. Detailed plastic kit

Model tanks

1:35 Chevrolet 15 CWT

€30.99

Detailed plastic kit   Warning! Not suitable for children under 14 years.

Model tanks

1:35 Commando Car

€12.49

Article number: 510000320 Product: 1/35 Gefechtswagen Model Dim.: 9,5 cm 1 FIGURE INCLUDED Much work was carried out in the USA and Britain to design special airborne vehicles to drop behind the enemy lines. Willys MB-Jeeps engaged in helping the Infantry by clearing snipers and other commando tasks. Generally manned by a sergeant and a trooper this vehicle was modified in many respects. It was armed with no fewer than five machine guns and had additional tanks for 135 l. of fuel.

Model tanks

1:35 Dt. Sd.Kfz.138 Marder III Ausf. H

€31.99

Article number: 510006566 Product: 1:35 Dt. Sd.Kfz.138 Marder III Ausf. H The tank destroyer Marder III Sd.Kfz. 138 was developed for the Wehrmacht on the basis of the now obsolete Czechoslovak-made Panzerkampfwagen 38(t). It went into production in 1942 for the needs of the eastern operation area and was used on all fronts until the end of the war. A major improvement was the installation of an effective 75 mm anti-tank gun protected by a slanted steel shield. In order to better protect the soldiers, the engine was placed in the rear part of the vehicle and the weapon system in the middle. With the Marder III, the Wehrmacht had an easy-to-manufacture tank destroyer with high firepower that was capable of fighting the most important tanks of the time. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35   Warning! Not suitable for children under 14 years.

Model tanks

1:35 Dt. SdKfz. 234/2 Puma 8-Rad

€35.99

Article number: 510006572 Product: 1:35 Dt. SdKfz. 234/2 Puma 8-Rad The German armored car ‘Schwerer Panzerspähwagen Sd.Kfz. 234/2’ known as "Puma", was developed and produced by the German war machine in the closing years of WW2. The vehicle proved to be an excellent mix of mobility, protection and firepower which was built upon the operational experience gained by the Wehrmacht in the early stages of the conflict. From 1939 onwards the German army had used armored vehicles very effectively for advanced reconnaissance tasks, and also in a ground support role for its troops. The "Puma" was initially a reconnaissance vehicle, but due to its KwK 39 L / 60 50 mm gun it could also be used equally effectively in offensive actions against infantry and other armored vehicles. It was deployed in limited numbers on both the Eastern and Western fronts. The highly effective independent suspension system of the eight wheels and the powerful engine, enabled the Puma to reach speeds of up to 90 km/h on all types of battlefield terrain. Detailed plastic kit in scale 1:35

Model tanks

1:35 DUKW Amphibious vehicle

€32.99

Article number: 510006392 Product: 1:35 DUKW Amphibious vehicle To meet the logistical needs of the US Army landing forces in transferring loads quickly and efficiently from ships to beaches, the American General Motor CCKW-353 2½ t 6x6 amphibious version tactical transport truck was designed and built for this purpose. The basic vehicle components were the same as the GMC road truck with its 4,400 cm3 6-cylinder engine, three differentials and six driving wheels. The DUKW was characterized by a welded hull to make it amphibious, which was then reinforced by horizontal ribs. Its key attribute however was its extraordinary versatility and load capacity. It could carry a 2,400 kg payload or 25 fully equipped troops. DUKWs were deployed extensively in all theaters of war by the U.S. Army, U.S. Marines and the armed forces of numerous Allied countries. Notably, they featured in many significant WW11 beach landings including the D-Day Normandy landings at Utah and Omaha and also at Salerno, Anzio and on the beaches of the Pacific campaign. Kit, instructions, decor

Military figures & accessories

1:35 ELCO 80' PT Boat Crew

€19.99

Article number: 510005606 Product: 1/35 ELCO 80' PT Boat Crew 10 FIGURES INCLUDED Deatailed plastic kit of model Figuren-Set Crew (10) ELCO 80 PT in scale 1:35

Military figures & accessories

1:35 Field Tool Shop

€9.49

Model tanks

1:35 Ger. Sd.Kfz.167 Sturmgeschütz IV

€30.99

Article number: 510000223 Product: 1:35 GER. Sd.Kfz.167 Sturmgeschütz IV The Sturmgeschütz IV was developed on the chassis of the Panzer IV medium tank to provide the German army with an assault gun capable of effectively serving as a tank destroyer in the later stages of World War II. The Stug IV was equipped with a Stuk40 75mm L/48 high-velocity gun installed in a casemate, protected by armored mantlet, capable of penetrating the armor of major enemy armored vehicles. Distributed to units in the early months of 1944, it supplemented and often replaced the Stug III assault gun, which had experienced a sudden decrease in production in 1943 due to increasingly frequent Allied bomber raids on German industrial areas. Widely deployed on the Eastern Front, the Stug IV was also utilized by armored units and anti-tank detachments of the Wehrmacht in Normandy, where its low profile proved to be particularly difficult to identify in the hedgerows of the French countryside.   Warning! Not suitable for children under 14 years.

Model tanks

1:35 GMC 2 1/2Ton.Truck"D-Day 80th Ann."

€25.99

Article number: 510006271 Product: 1:35 GMC 2 1/2Ton.Truck"D-Day 80th Ann." The GMC 2 ½ ton truck was built in an exceptionally high number of units and can be considered the backbone of the logistical operations of the U.S. Army during World War II. Characterized by a very robust and reliable structure, its strength lay in its excellent off-road performance, thanks to its six-wheel drive and effective suspension design. It was produced in numerous variations, including the more common "cargo" versions with open or closed cabins, "long wheelbase," and "short wheelbase." Additionally, various configurations, some developed directly in the field, were tailored for more specific and precise purposes. Its role was crucial in meeting the demanding logistical needs following the initial stages of the Normandy landings, involving the transportation and handling of substantial quantities of troops and materials. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Model tanks

1:35 HEMTT Gun Truck

€41.99

Article number: 510106510 Product: 1:35 HEMTT Gun Truck Model Dim.: 28,0 cm FULLY UPGRADE MOULDS Decals for one version The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. In a lot of conflicts, as in Iraq and Afghanistan, it has been often modified by the field workshops, on the specific requirements of the crews, in order to be more and more effective in the hard operating environments, Furthermore some HEMTT versions have been modified to be used in escort and convoys protection duties. Some additional protections and defensive weapons have been add on.

Model tanks

1:35 HMMWV M966 TOW Carrier

€24.99

Article number: 510006598 Product: 1:35 HMMWV M966 TOW Carrier The military vehicle developed for the US Army with the acronym HMMWV ( High Mobility Multipurpose Wheeled Vehicle ), universally known as the "Humvee", is representative of the technological evolution of US "know-how" applied to the creation of extremely flexible, ‘all-condition’ vehicles of which even the "Willys", is still an icon today. The "Humvee" went into production during the 1980s and is characterized by its large dimensions and operational flexibility, due in part to the four-wheel drive and the robust structure, which can withstand the most challenging operational and environmental conditions. Different versions were made for roles such as troop transport, logistics, advanced reconnaissance and target acquisition. The M966 Tow Carrier version was equipped with a Tow missile system mounted on the roof of the vehicle in order to increase the Humvee's offensive potential against tanks and other armored vehicles. Detailed plastic kit in scale 1:32

Model tanks

1:35 IT WW2 PzKpfw.VI Tiger I Ausf.E mP.

€39.99

Article number: 510006507 Product: 1:35 IT PzKpfw.VI Tiger I Ausf.E mP. Model Dim.: 24,1 cm - UPGRADED MOULDS - - Figure not included - Parts for two variants - Photo-etched fret and link by link tracks included - Decals for 4 versions The Tiger I tank, which has been produced in the second half of 1943, was based on the hull of the firstoperational version used in North Africa and Russia. At the beginning this tank had wheels with rubber rim,which will be replaced in the following productions starting from February 1944, but it was equipped withthe new turret with increased protection and better cupola for the commander. Besides some of thesevehicles maintained the characteristic system of dust filters Feifel, and the smoke grenade launchers. On thetanks produced since August 1943 was also applied a magnetic mine paste that will become standard on alltanks of the German Army.

Model tanks

1:35 Kfz.12 Horch 901 typ 40 Early Vers.

€25.99

Article number: 510006597 Product: 1:35 Kfz.12 Horch 901 typ 40 Frühe Ausf. Beginning in the mid ‘30s Germany sought to improve the mobility and mechanization of its Army. One of the more important requirements of its ambitious development program was the adoption of a standard military chassis which would optimize cross country mobility. Among the different versions that were proposed, the medium off road passenger cars, four wheel drive platform, built by Opelwerk and Auto Union found favour.The Wehrmacht used them in various configurations as troop transports, as tow tractors and in reconnaissance roles. The Kfz. 12, built by Horch (Horch was part of the Auto Union group together with Wanderer, Audi and DKW), proved to be very reliable and robust in any operating environment due to its simple but effective design. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Model tanks

1:35 Land Rover 109 "Guardia Civil"

€21.49

Article number: 510006542 Product: 1:35 Land Rover 109 "Guardia Civil" Model Dim.: 12,5 cm UPGRADED MOULDS Decals for 3 versions The Land Rover was certainly one of the most famous symbols of "Made in England" automobile production and is a real milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes realized on 1947. It has been characterized by the 4x4 traction system and by a robust and reliable design able to tackle the most difficult and challenging trails. The aluminum body provide lightness but, at the same time, more resistance against corrosions and more durable in time. In 1971, when the III Series was introduced, more than 1,000,000 of Land Rovers has been produced. Available in two versions: the "standard" one and the "long wheel base". Thanks to its extraordinary versatility was used in both military and civilian duties, and was also produced under license by the Spanish Motor Company Santana during the 70s. Detailed Plastic Kit of model Land Rover 109 "Guardia Civil" in scale 1:35

Military ship models

1:35 LCM 3 (Landing craft mechanized)

€51.99

Article number: 510006755 Product: 1:35 LCM 3 (Landing craft mechanized) The Landing Craft Mechanized (LCM) is arguably the most famous landing craft in history, its profile intimately linked to Allied amphibious operations in World War II, from Anzio to the beaches of Normandy.The LCM-3 variant is certainly one of the most successful and effectively employed. The design was simple and straightforward yet extremely rational. The large front loading ramp allowed for the rapid disembarkation of a fully armed infantry squad as well as a 30-ton medium Sherman tank. The armor was very light, protecting the diesel engine, which enabled the LCM to reach a maximum speed of 8 knots, and the crew required for navigation and close defense, consisting of four men. However, significant was its loading capacity and operational flexibility, which allowed the LCM-3 to carve out an important place in 20th-century military history.   Warning! Not suitable for children under 14 years.

Military ship models

1:35 LCVP with US Infantry

€62.99

Article number: 510006524 Product: 1:35 LCVP with US Infantry Model Dim.: 31,4 cm NEW SOLDIERS MOULDS D-DAY SERIES THE BOX CONTAINS 30 FIGURES Decals for 8 versions Developed by Higgins Industries of New Orleans on the basis of a flat-bottomed boat used in the Louisiana marshlands, the LCVP (Landing Craft, Vehicle and Personnel) took part in all the major amphibious operations of Second World War, in Europe and the Pacific. Its task was to shuttle back and forth between the big ships and the beaches, carrying up to thirty men, light vehicles and anything else that was needed. Generally armed with two rear-mounted machine guns, it was powered by a 250 HP Hall Scott petrol engine or a 225 HP Gray diesel engine. After the end of the Second World War the LCVP stayed in service, occupying a number of roles. It saw action in Korea and Indochina and has also been adapted for civilian use all over the world. D-Days Series Box contains 30 figures

Model tanks

1:35 Leopard 1A5 MBT

€34.99

Article number: 510006481 Product: 1:35 KPz Leopard 1A5 WA The Leopard 1 tank which entered into service in the mid1960s, formed the backbone of the Armoured Corps of Federal Germany and of several NATO Countries during the "Cold War" period. The Leopard’s battle role was of paramount importance, as it was at the forefront in engaging the overwhelming number of tanks that could be deployed by the armies of the Warsaw Pact. It was armed with the reliable 105mm L7 gun which was capable of using different types of ammunition. The A5 version was a significant improvement with the adoption of a modified turret capable of housing the new computerized target identification and fire control systems. Composite armour plates made of polycarbonate were also added and which significantly increased the protection and resistance from enemy hits.

Model tanks

1:35 Leopard 2A4

€34.99

Article number: 510006559 Product: 1:35 Leopard 2A4 Model Dim.: 27,6 cm SUPER DECALS SHEET FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET - NEW GLUABLE RUBBER TRACKS Entered into service between the late '70s and early' 80s the Leopard 2 is considered one of the best armored vehicles in the world. It has been developed to offer the German "Bundeswehr" a powerful and modern Main Battle Tank able to replace the Leopards 1. The main armament is the 120mm. Rheinmetall L/55 smoothbore gun. Despite is heavy armor, the Leopard 2 is able to reach a significant speed of 65 km/h and it has a good performance on every kind of terrains. From the first versions, the MBT has been constantly improved and updated. The Leopard 2 A4, one of the most widespread version, is adopting an advance fire control system and modern hi-tech materials able to increase the protection capability. A part Germany, the Leopard 2 was able to achieve a good commercial success in many countries as Holland, Turkey, Austria, Greece and many others. Detailed Plastic Kit of model Leopard 2A4 in scale 1:35

Model tanks

1:35 LVT-4 Wasserbüffel

€36.99

The L.V.T. tracked vehicles (an acronym for Landing Vehicle Tracked) were developed to equip the United States armed forces, including the Army and the Marine Corps, with a suitable vehicle for amphibious operations capable of providing a good level of protection. Often known as "Amtrac," they were widely used in the Pacific theater against Japanese forces, as well as in the European theater during the last year of the war. The LVT-4, in particular, represented a significant improvement over previous versions. With the redesign, the engine was relocated to a central position, freeing up the rear of the vehicle for the addition of a ramp that allowed for the rapid loading and unloading of light vehicles or small-caliber artillery pieces to support landing troops. It was the most successful version with the highest number of vehicles produced. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Model tanks

1:35 M-109/A2-A3G Howitzer

€34.99

Detailed plastic kit in scale 1:32

Military ship models

1:35 M.A.S. 568 4a Torpedoboot w. Crew

€114.99

Article number: 510005626 Product: 1:35 M.A.S. 568 4a Torpedoboot m. Crew Since First World War the Italian Regia Marina was deserved great attention to the development of small and rapid vessels generally armed with torpedoes. The moto torpedo boats, more known as MAS, were civilian vessels variants. The results achieved during First World War were remarkable with the sinking, on behalf of Commandant Luigi Rizzo, of the Austro-Hungarian Marine cruiser Wien and Szent István. Neither less were more suitable for confined seas nor shallow water like the Adriatic Sea, the Italian Marine continued working to improve the performance of the small but fast moto torpedoes. The MAS 500, equipped gasoline engines Isotta-Fraschini, build during Second World War and more powerful and reliable, were deployed both as moto torpedoes and anti-submarine platforms for depth charges dropping. Capable of reaching a top speed of 40 notches and armed with two 450mm torpedoes. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35

Model tanks

1:35 M1 155mm Howitzer with crew

€28.49

Article number: 510006581 Product: 1:35 M1 155mm Howitzer with crew Model Dim.: 20,9 cm With Artillery Crew - 6 figures included In the years leading up to World War II, the United States undertook a complete modernization of the army's artillery capabilities to increase their efficiency and effectiveness. Whilst great attention was paid to ammunition and artillery trailers, one outcome of this modernization project was the development of the 155/23 howitzer. It was first produced in 1942 as a medium artillery piece and served the US Army throughout the Second World War. It could use different types of ammunition and had a maximum range of 14,600 meters. Very robust and reliable, it also proved to have good operational longevity. It was in fact used by the U.S. Army post WW2 during the Korean War, and indeed during the Vietnam War before eventually being replaced by the more modern M198. Detailed plastic kit in scale 1:35

Model tanks

1:35 M110 Self Propelled Howitzer

€31.99

Article number: 510006574 Product: 1:35 M110 Self Propelled Howitzer Model Dim.: 25,8 cm Decal for 1 versions The self-propelled guns of the M-110 series have represented, for many years, the backbone of the field artillery of the United States Army. They were also largely used by the American Allied Countries. It entered service in the ‘60s but thanks to the improvements made in 1977 on the M-110 A1 version, it acquired improved operational efficiency. The M-110 A1 was armed with the new 203 mm long range M201 gun able to use a wide range of ammunitions. The project was characterized by an excellent mix in terms of firepower and mobility thanks to its reliable chassis (the same of the M-107). The M-110 A1 was deployed in the division artillery to perform tasks as general support, counter-battery fire and suppression of enemy positions. It was widely used during the conflict in Lebanon and during the first Gulf war. Detailed Plastic Kit

Model tanks

1:35 M32 Recovery Vehicle

€29.99

Article number: 510006547 Product: 1:35 M32 Recovery Vehicle Model Dim.: 16,7 cm NEW GLUABLE TRACKS The Armored Recovery Vehicles (ARV), were introduced during the Second World War. They were built on the hulls of existing armored vehicles, removing the main armament and the turret and installing of specific equipment for the recovery or repair of armoured fighting vehicles damaged in battle. The American M-32 ARV was based on the chassis of the well-known Sherman A-4 medium tank and it was used by U.S. Army in the European Theater of Operations during the Second World War. It was characterized by the superstructure that permitted to lift and to trail the damaged tanks. Furthermore on M-32 a wide set of repairing tools and spare parts were loaded on board emphasizing its role of real "mobile armoured workshop" capable of operating on the front line. The M-32 was even able to perform complex operation as the replacing of the tank engine. The M-32, after the end of WWII, served in the U.S. Army during the Korean War and it was used by many Countries until the ‘90s. Detailed Plastic Kit of model M32 Recovery Vehicle in scale 1:35

Model tanks

1:35 M4A1 Sherman with U.S. Infantry

€37.99

Article number: 510006568 Product: 1:35 M4A1 Sherman with U.S. Infantry Length of the model 167 mm CONTAINS 10 FIGURES - NEW GLUEABLE RUBBER TRUCKS - SUPER DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units and it formed the backbone of United Stated armoured forces during at those time. It has been produced in several variants and versions. The first version to be produced on wide scale was the Sherman M4A1 characterised by the rounded edges of the fully casted upper hull. Even the turret had a rounded appearance. The Sherman would entered combat in armoured corps of United States Army in 1942 during the first months of the war. It was armed with the 75 mm gun that was replaced in the latest A1 version with the high-speed 76 mm gun. Thanks to its Continental R975 gasoline engine the tank was able to obtain good performances on all type of terrains. However the most important strength of the tank was its project. The Sherman was reliable, cheap and easy to produce in great numbers. Detailed Plastic Kit

Model tanks

1:35 M4A3E8 Sherman "Fury"

€41.99

The model "M4A3E8 Sherman Fury" in scale 1/35 has a length of about 168 mm. Fully upgraded moulds The box contains 2 track versions made by a new raw material which can be glued and painted. The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units ant it formed the backbone of United Stated armoured forces during at those time. it has been produced in several variants and versions The production of the M4A3E8 versions started at the end of 1944. The M4A3E8, adopting the nickname Easy Eight, took several technical improvements enhancing the Sherman operational effectiveness. The 76mm M1 high velocity gun had been flanked by a new horizontal volute spring suspension (HVSS) system able to ensure a better driving condition and to guarantee a higher speed. The "Easy Eight" participated to the final stages of World War II and took active part in the Korean War.

Model tanks

1:35 M6 Dodge Anti-Tank

€20.99

Article number: 510106555 Product: 1:35 M6 Dodge Anti-Tank Model Dim.: 12,9 cm COLOR INSTRUCTION SHEET The Gun Motor Carriage M6 was developed on the famous 4x4 Dodge WC52 frame adopting, on the rear deck, a 37 mm. light anti-tank gun. Thanks to its Dodge T-214 6 cylinders engine the M6 was able to reach, on road, the speed of 90 Km/h. The United States Army used GMC M6 from the late 1942 up to the end of World War II on all the operating theaters as the Mediterranean, the European front and the Pacific. The GMC M6 was set up and developed to be anti-tank vehicle but, since the first clashes in Tunisia, its light gun was often ineffective against the most recent German tanks protections. Its main role was partially changed and the M6 started to be used as infantry support vehicles. Detailed Plastic Kit of model M6 Dodge Anti-Tank in scale 1:35

Model tanks

1:35 Mod. US M978 Fuel Service Truck

€48.99

Article number: 510006554 Product: 1:35 Mod. US M978 Fuel Service Truck Model Dim.: 29,7 cm UPGRADED MOULDS - COLOR INSTRUCTIONS SHEET - NEW RIMS AND RUBBER TYRES The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. The outfitted versions, as the M978 Tanker, has been designed to perform, in a very precise and effective way, the different military logistic needs. Thanks to the loading capacity of over 9,500 liters, the tank installed on the vehicle is able to transport a significant quantity of fuel. The M978 has been effectively used by the U.S. Army in various severe operational areas such as Iraq and Afghanistan. Detailed Plastic Kit of model Mod. US M978 Fuel Service Truck in scale 1:35

Model tanks

1:35 Panzerwerfer 42 Maultier Halftrack

€32.99

Article number: 510006546 Product: 1/35 Panzerwerfer 42 Maultier Halftrack Model Dim.: 17,1 cm Decals for 3 versions 2 TRACKS TIPES: GLUABLE RUBBER TRUCKS and HARD PLASTIC LINK and LENGTH TRACKS - COLOR INSTRUCTION SHEET The use of multiple rocket launchers by the German Armed Forces during World War II was quite extensive due to low cost and high efficiency of these arms systems. The main inconvenience of these vehicles was scarce mobility which made them vulnerable to enemy counter attacks. Thus, this mobile version of a 150 mm rocket-launcher type 42 was mounted on a half-truck Sd.Kfz. 4 Maultier, which guaranteed high mobility in off-road conditions. The vehicle was equipped with armour to protect its crew. Detailed Plastic Kit of model Panzerwerfer 42 Maultier Halftrack in scale 1:72

Model tanks

1:35 Partisans

€12.49

Article number: 510006556 Product: 1:35 Partisans From ESCI Original Moulds During the German occupation of European countries in WW2 a key role was played by local ‘partisan’ groups. The partisans often had different ideals and political motivations but were united by the same goal to assist with the effort to secure victory against the German occupying forces. The type of operations conducted by partisan groups were wide-ranging, including both intelligence gathering and support activities to Allied forces, particularly in relation to acts of sabotage against the enemy's logistics and communications infrastructures. Detailed Plastic Kit

Military ship models

1:35 S.L.C. Maiale 200 with crew

€28.99

Article number: 510005621 Product: 1:35 S.L.C. Maiale 200 m. Besatzung (2) Based upon the experiences and successes of the Italian Regia Marina in the First World War. In 1935 Teseo Tesei and Elios Toschi developed and perfected the Siluro a Lenta Corsa (S.L.C.), which was more informally known as "Maiale" (Pig). This was a torpedo modified to allow it to be guided underwater by two operators equipped with respirators. It was intended to carry a high explosive warhead under the keel of enemy ships. The modified torpedoes had limited speed, were fitted with a guidance system and held batteries that powered the electric motor which guaranteed a range of 12-15 miles. The most notable action of these Italian Navy raiders took place on 19th December 1941. Transported by the submarine "Scirè" to the strongly defended Alexandria harbour, the S.L.C.’s were able to attack and disable for several months, Royal Navy battleships H.M.S: Valiant and the H.M.S. Queen Elizabeth. Detailed plastic kit in scale 1:35

Military figures & accessories

1:35 Sandbags

€9.49

Military ship models

1:35 Schnellboot Typ S-100 PRM Edition

€194.99

Article number: 510005603 Product: 1:35 Schnellboot Typ S-100 PRM Edition Model Dim.: 99,9 cm Decals for one version Among the various stipulations of the Treaty of Versailles in 1919 was a severe limitation of German naval construction. Small craft were not covered by these stipulations and resulted in the development of motor torpedo boats starting in the late 1920s. ?The design was based on a civil yacht which was, however, modified to be able to transport two torpedoes: the S-1. ?The evolution of the design continued until it reached, in its most advanced models, 35 meters in length weighing in at 100 metric tons. Even room for secondary armaments was progressively increased. The construction was composite, with aluminium beams and wooden planking. The characteristic ironclad deckhouse appeared with the S-100 model and was a necessary response to increased Allied air superiority and to the intensified low flying air attacks being flown. The boats were primarily used to attack allied ships in the coastal areas of the British Isles, but were also used for operations in the Mediterranean and Black seas, usually under cover of dark. Starting in 1943, after great part of the Kriegsmarine had been either destroyed or immobilised, these motor torpedo boats were among the few vessels still in the water and able to perform military operations, exposing them to a progressively increasing number of battles and the consequent grave losses.

Model tanks

1:35 Sd. Anhänger 51

€12.49

Article number: 510006450 Product: 1:35 Sd. Anhänger 51 Model Dim.: 7,6 cm CONTAINS 2 MODELS The Sd Anhänger 51 trailer could easily be used by a large number of Wehrmacht vehicles. The trailers have been developed to be used as ammo carriers and they were typically associated to anti-aircraft half-tracks armed with 20 mm Flak guns. During the Military campaigns the trailers were often fully loaded with any kind of materials. The lower "U" frame was extremely robust and suitable to be used on road and off road. Detailed Plastic Kit of model Sd. Anhänger 51 in scale 1:35

Model tanks

1:35 Sd.Kfz. 171 Panther Ausf. A

€36.99

Article number: 510000270 Product: 1:35 Sd.Kfz. 171 Panther Ausf. A WA The Panzerkampfwagen V "Panther" is widely recognized as one of the best tanks that was produced during World War 11. It was deployed as a direct response to the Soviet T-34 and KV-1 tanks on the Eastern Front, which were superior to both the Panzer III and Panzer IV in terms of performance and armaments. Powered by a 700 horsepower V-12 Maybach engine, it was armed with the 75 mm KwK 42 high speed gun which was a very effective anti-tank weapon. The Panther was designed with optimal armor protection, including inclined front armor. Its overall mobility, speed and armaments made the Panther one of the leading tanks of the period, and ensured its deployment on all of the main operational fronts, from the East through Italy and France.

Model tanks

1:35 Sd.Kfz. 234/3 Heavy Recon. Veh.

€35.99

Article number: 510006756 Product: 1:35 Sd.Kfz. 234/3 Sw. Panzerspähwagen The armored cars of the Schwerer Panzerspähwagen Sd.Kfz. 234 series were produced by the German war industry in the final phase of the Second World War. They were characterized by a high level of construction quality that combined mobility, operational flexibility, and offensive capability. The design represented an excellent blend of speed on all types of terrain, protection, and firepower, synthesizing the operational experience that the Wehrmacht had gathered in the early years of the Second World War. They could achieve a maximum road speed of 85 km/h. Among the various versions produced, the Sd.Kfz. 234/3 was armed with the short-barreled 75mm KwK37 cannon mounted in a fixed position in an open-topped fighting compartment, which could be effectively used to support infantry against lightly protected targets as well as against light armored vehicles. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Model tanks

1:35 Sd.Kfz. 305/22 Funkwagen

€29.99

Article number: 510006575 Product: 1:35 Sd.Kfz. 305/22 Funkwagen Model Dim.: 17,1 cm COLOR INSTRUCTION SHEET - RUBBER TYRES The Opel Blitz was the main truck used by German forces during the Second World War. It was deployed extensively on all fronts in huge numbers, and was consequently considered to be the "working mule" of the Wehrmacht. Thanks to the sturdy frame, the robust system of rigid axles with leaf springs and the twin-wheels on the back, the Opel Blitz was able to carry a payload of over 3 tons. The 3,600 cc. engine was easy to maintain and provided 75 hp. The most popular version was the 4x2 with rear wheel drive. However, there was also a 4x4 version that operated both in Russia and the North African desert. Thanks to its flexibility and its wide rear cargo area, the Opel Blitz was also deployed in additional roles including as a mobile command post equipped with radio communications for battlefield management of ground troops. Detailed plastic kit in scale 1:35

Model tanks

1:35 Semovente L 40 da 47/32

€30.99

Article number: 510006477 Product: 1:35 Semovente L 40 47/32 The Semovente L40 was developed and further improvised using the hull of the L6/40 light tank to equip the Italian Regio Esercito with a fast armored vehicle, which was capable of providing artillery support and could also be deployed as a tank destroyer. In the construction phase of the L40, the original L6/40 tank turret was removed and the 47/32 Mod.1935 anti-tank cannon, similar to the one used on the "M" series tanks, was installed in the open casemate. The Semovente was notable for its small size, the plate and rivet armor used being typical of Italian production of the period and by a crew of only two men. Despite its battlefield performance being clearly inadequate in the face of enemy armor, it continued to be used during the Second World War by Italian Forces in Libya, Tunisia and also in the homeland campaign. Following the Armistice some units were deployed on secondary military tasks with the Wehrmacht and Luftwaffe support troops.

Model tanks

1:35 Sherman M4A1

€28.99

Article number: 510000225 Product: 1:35 Sherman M4A1 Model Dim.: 16,5 cm "V-DAY" Special Edition NEW DECAL VERSIONS: FRANCE & SOUTH AFRICA (in addition to the existing US version) In 1941, after the German attack on Russia, it became clear to the UNITED STATES that possibility of an American involvement in the war was becoming more and more inevitable. For this reason, President Roosevelt ordered substantial production increases of the medium tank M4. The tank was not a completely new model, since it derived from the previous model M3 "Grant". The Sherman had some major improvements on the superstructure and on the armament as well as on the welded or cast hull. The "General Sherman", under which name the new tank was soon to be known, was equipped with a 75 mm gun, which was, however, insufficient against the German Tanks. This necessitated a series of changes, including a completely new turret as well as a 76 mm gun, which would be more efficient than the previous one. The new prototype was given the designation M4 A1. In January 1944, the new type was introduced. Until the end of the war, about 3400 pieces were produced. Notwithstanding the improvements, there were still many defects, one of them being the lack of protection. Frequently the crew was forced to protect the tank sides and the front with sandbags. In some instances the most exposed track sections were covered and sometimes even cement or steel blocks were attached. Tanks to its numerical superiority, the tank was able to match the German tanks, using its great maneouverability and its excellent 76 mm gun. M4 A1 took part in the invasion of Normandy and in all European theatres. Detaillierter Plastikmodellbausatz des Modells Sherman M4A1 im Maßstab 1:35 VE-DAY SPECIAL EDITION NEW DECAL VERSIONS: FRANCE & SOUTH AFRICA (in addition to the existing US version)

Military ship models

1:35 Speedboat S-26 / S-38

€189.99

Article number: 510005625 Product: 1:35 Speedboat S-26 / S-38 Between the two wars several Navies undertook development programs to implement flotillas of motor torpedo boats capable of carrying out patrol and attack missions. The new engine technologies, compared to First World War versions, provided greater performance and operational efficiency. During the 1930s the German Kriegsmarine developed the famous S-class motor torpedo boats. Between 1939 and 1940 the S-26 series was built and characterised by a forecastle integrated with two 533 mm torpedo tubes. The aesthetic features of the bow were maintained and further improved in subsequent versions. The S38 was one of the most celebrated Schnellboot versions, with almost 100 units produced. They were 35 meters long with a full load displacement of over 100 tons. With its Daimler Benz 12-cylinder engines it was able to reach a maximum speed of 39.5 knots. Kit, instructions, decor

Model tanks

1:35 US M-7 Priest Howitzer Self-Prop

€31.99

Article number: 510006580 Product: 1:35 US M-7 Priest Howitzer Self-Prop Model Dim.: 17,2 cm NEW GLUABLE RUBBER TRACKS - DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET CONTAINS 1 FIGURE The deployment of self-propelled artillery during the Second World War was very quickly adopted by all of the combatants. Following the innovative use of mobile artillery by the German army at the outset of the conflict, the need for artillery pieces to be as mobile as tank battalions was universally recognised. The Allies initially mounted their first self-propelled artillery units on half-track vehicles, but the most effective solution manifested itself with the introduction of the M7 Priest. Using the hull of the M3 Lee medium tank the M7 was armed with a 105mm M2A1 howitzer. It was deployed operationally for the first time in 1942 by British troops who gave it the nickname "Priest", due to the position of the machine gun in the front of the vehicle which resembled a Church pulpit. Robust and reliable, it had a plentiful supply of ammunition and provided effective indirect support fire. It was used by both the American army and the U.S. Marines on all fronts throughout the course of the war. Detailed plastic kit

Model tanks

1:35 US M8 Greyhound

€25.99

Article number: 510006364 Product: 1:35 US M8 Greyhound At the beginning of World War II, the U.S. Army had lightweight and lightly armed vehicles, called "scout cars," for advanced reconnaissance activities. Developed during the war, the M-8 Greyhound armored car, characterized by increased protection and heavier armament, represented a turning point for the American army. The vehicle provided greater operational flexibility and could be more effectively used to support ground troops thanks to the 37mm cannon installed in the turret. First used on the Italian front, from Monte Cassino to Anzio, it later participated in the D-Day operations in June 1944. Although the terrain in Normandy proved difficult and challenging during the initial stages of the operation, the M-8 was highly appreciated for its speed and versatility. It was utilized not only by the U.S. Army but also by numerous Allied countries. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military ship models

1:35 Vosper 72''6' MTB 77

€114.99

Article number: 510005610 Product: 1:35 Vosper 72''6' MTB 77 Model Dim.: 63,1 cm 100% NEW MOULDS - Decals for 3 versions Vosper company became famous, during the Second World War, for the production of small and fast Motor Torpedo Boats (MTB) and Motor Gun Boats (MGB) for the Royal Navy. Among the various boats in production, the Vosper MTB 72’6" were characterized by a significant life cycle with different mission profiles as the coastal patrol and the anti-submarine support in the North Sea and English Channel. Moves from 3 engines with and impressive power of 4,200 hp, Vosper MTB was able to reach a speed close to 40 knots (70 km/h). The first versions were introduced at the beginning of the war but were gradually introduced new variants, type I and type II, which were characterized by a different combination of offensive and defensive weaponry. They were usually armed with 457 mm torpedo tubes., depth charges, and 0.303" Vickers machine guns or, more rarely, from 0.5" Vickers machine guns , for air defence. The crew consisted of 10 to 13 men.

Military figures & accessories

1:35 WWII Ger./US Jerry Cans

€9.49

Model tanks

1:35 WWII US Off-Road Support Vehicle

€15.99

Article number: 510000314 Product: 1/35 WWII US Off-Road Support Vehicle Model Dim.: 14 cm Decals for one version. In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multi-purpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of 1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II.

Military aeroplane models

1:48 RF-4E Phantom II

€38.99

Article number: 510002818 Product: 1:48 RF-4E Phantom II The RF-4E was the unarmed reconnaissance version of the famous McDonnell Douglas two-seats fighter F-4 Phantom II. It was designed and developed for export, and it was the combination of reconnaissance system of the RF-4C with the airframe and the powerful engines of the F-4E. The German Luftwaffe received the first samples in the early 70s and became one of the main users along with Japan, Iran, Israel and Greece. Furthermore, many components and reconnaissance systems were also manufactured in Germany. The RF-4E was able to carry out reconnaissance missions "all-weather" in a very effective way thanks to the cameras installed in the bays, the infrared sensors, and the target looking radar system. Some Countries developed specific versions more in line with the specific operational use. Detailed plastic kit

Model tanks

1:48 RF-4E Phantom II

€36.99

Article number: 510006584 Product: 1:35 Semovente M42 da 75/34 At the end of the 1930’s the Italian Regio Esercito (Royal Italian Army) began to deploy self-propelled artillery guns to provide support for tanks and infantry units. The ‘Semovente’ 75/18 was developed on the back of the ‘M’ series medium tank hull and soon became the most feared Italian armored vehicle. In addition to its primary artillery role, the 75mm howitzer installed in the casemate proved to be a highly effective anti-tank weapon, capable of destroying even the most powerful and heavily armored British and American tanks. During the war however, the Italian Regio Esercito requested the development of a version with increased offensive capability. The 75/34 cannon which was originally designed for an anti-tank role, was fitted to the hull of the M42 self-propelled tank. The initial units of which, were distributed to the Italian Army in the spring of 1943. As a result of its effective operational performance, it was also used by German anti-tank battalions after the armistice in September 1943.

Military aeroplane models

1:48 A-20B / Boston III

€45.99

  Warning! Not suitable for children under 14 years.

Military aeroplane models

1:48 A-4E/F/G Skyhawk

€35.99

Article number: 510002826 Product: 1:48 A-4E/F/G Skyhawk The Douglas A-4 Skyhawk was developed in the 1950s and was one of the most famous light attack aircraft in the aviation history. Its small and compact dimensions made it extremely maneuverable and ideal for use on the aircraft carriers. It was characterized by the low-mounted delta wing solution, the two small air intakes on the fuselage sides, and the adoption of the single Pratt & Whitney J52 turbojet engine. It was armed with two 20 mm. guns and, thanks to its hard points under the wings and under the fuselage the Skyhawk was able to support a wide variety of air-to-air missiles, air-to-surface missiles, rockets and bombs. Thanks to its operational capabilities, the A-4 scored a good commercial success and has been adopted by several air forces around the world. In addition to United States, it was used, among others, by Australia, New Zealand, Kuwait and Israel. Scope of delivery: Kit, Instructions, Decor

Military aeroplane models

1:48 A-7 E Corsair II

€39.99

Article number: 510002797 Product: 1:48 A-7E Corsair II Model Dim.: 29,0 cm From ESCI moulds SUPER DECALS SHEET The LTV A-7 Corsair II was designed and implemented in the first half of the 1960s to satisfy the specific United States Navy request to have a new carrier-capable light attack aircraft able to replace the Douglas A-4 Skyhawk and the piston-powered Douglas A-1 Skyraider. It was directly developed by the fighter Vought F-8 Crusade airframe. The A-7 was characterized by the large frontal air intake under the cabin, by the 35° foldable swept wing to optimize the use and the storage on the aircraft carriers flight decks and by the adoption of a modern Head-up-Display to enhance the operational effectiveness. Thanks to its underwing hardpoints the A-7 was able to carry an impressive offensive load based on conventional bombs, guided bombs as the Paveway and air-to-surface missiles. The A-7E was the last version produced for the U.S Navy with an improved operational capability and the possibility to use the Harpoon anti-ship missiles and the AGM-88 HARM anti-radiation missiles. Detailed plastic kit

Military helicopters

1:48 AB 212 /UH 1N

€25.99

Article number: 510002692 Product: 1:48 AB 212 /UH 1N Model Dim.: 36 cm Decals for 3 versions The UH-1N was developed from a project of the US based Bell Helicopter company at the end of the 60s. In Italy, a similar version is produced on license by Agusta Westland under the designation AB-212. The AB-212 is a medium, two-blade rotor powered by two Pratt & Whitney PT6T turbo shaft power turbines providing 1.342 Kw. It is a development of model 205, the main difference being an elongated fuselage. In the first half of the 2000s, the AB 212 was massively updated to enhance its operational capacity. It has been fitted with two 7,62mm swivelling machine guns on the tailgates, and the defensive equipment has been upgraded with antimissile flare launchers and additional ceramic and kevlar armour to protect the crew. Italian AB 212s with this upgraded configuration are employed since 2006 in Afghanistan, in the International Security Assistance Force mission.   Warning! Not suitable for children under 14 years.

Military helicopters

1:48 Chinook HC.1 / CH-47D

€57.99

Article number: 510002779 Product: 1:48 Chinook HC.1 / CH-47D Model Dim.: 34,0 cm SUPER DECALS SHEET COLORED INSTRUCTION SHEET UPGRADED MOULD The Boeing CH-47 Chinook is one of the most famous heavy-lift helicopters in Military Aviation History. Characteristic for its two engine tandem rotor configuration, one over the cabin and one in the tail section. It was specifically developed to meet the U.S. Army’s transportation needs and to replace the obsolete H-21. The CH-47 Chinook has been produced in several versions and it has been adopted by a lot of Countries all over the World. The British Royal Air Force has the largest Chinook fleet outside U.S.A. The Chinook has

Military aeroplane models

1:48 EA-18G Growler

€43.99

Article number: 510002824 Product: 1:48 EA-18G Growler The Boeing E/A-18 G Growler was designed to fulfill a specific U.S. Navy requirement. The aim was to commission a specialized carrier-based electronic warfare aircraft to replace the outdated Grumman EA-6B Prowler. The Growler is directly derived from the tandem-seat fighter F/A-18 F Super Hornet and retains all of its main aerodynamic features and characteristics. Its General Electric engines enable the Growler to attain a maximum speed of mach 1.8 and its flight performance is similar to that of the main carrier-based aircraft. The 2-man crew consists of the pilot and a WSO (Weapon System Officer). In place of the F/A-18’s 20 mm cannon the Growler has a dedicated electronic warfare system mounted. Additionally, on its hard points, the Growler can carry high and low band jamming pods, additional fuel tanks and AIM-120 AMRAAM missiles. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:48 F-14A TOMCAT

€29.99

Article number: 510002667 Product: 1/48 F-14A TOMCAT Model Dim.: 39 cm Decals for one version The U.S. Navys first super-fighter, the F-14, was developed partially on the basis of experience gained with the F-111, a multi-role plane designed by General Dynamics, the Navy version of which, the F111B, was built by Grumman. The F-14A first flew on 21st December 1970, and production-line models started reaching squadrons in 1973. Squadrons VF-1 and VF-2 accompanied the last voyage of the aircraft carrier Enterprise in Vietnam, yet never saw combat. The Tomcat would not see action until 1981, when it shot down two Libyan Su-22s during an encounter over the Gulf of Sirte. Since then the F-14 has been updated several times and has taken parts in various conflicts in the Middle East (Iran-Iraq war, 1st and 2nd Gulf War), as well as in operations over the former Yugoslavia and minor skirmishes over the Mediterranean.

Military aeroplane models

1:48 F-16A Fighting Falcon

€35.99

Article number: 510002786 Product: 1:48 F-16A Fighting Falcon Model Dim.: 31,5 cm SUPER DECALS SHEET FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET The F-16 Fighting Falcon, produced by the American company General Dynamics since the late '70s, is a real icon of the military aviation history. It was originally developed, according the United States Air Force need, to provide a modern and effective single-seat air superiority day fighter. However the project has progressively evolved and created an all-weather multirole aircraft able to have an extraordinary operational flexibility The F-16 is characterized by an original design easily recognizable by the frameless bubble canopy, which guarantees great visibility to the pilot. The F-16 adopted innovative solutions such as the side-mounted control stick, the "fly-by-wire" control system and modern avionics to enhance flight and combat performances. Appreciated by the pilots for its great manoeuvrability and reliability, the "Fighting Falcon" is armed with a 20mm M61 Vulcan internal cannon. Thanks to its hard points and location, it can mount a huge range of offensive weapons as missiles and bombs. The F-16 has been adopted by a lot of air forces around the World and used, often with great effectiveness, in several operational theatres. Detailed Plastic Kit of model F-4J Phantom IIF-16A Fighting Falcon in scale 1:48

Military aeroplane models

1:48 F-35B Lightning II

€76.99

Article number: 510002810 Product: 1:48 F-35B Lightning II The JSF Joint Strike Fighter program was a developmental project to create a new 5th generation all-weather multirole combat aircraft to replace the existing American and NATO strike-fighter force. The aerospace industry team led by aircraft manufacturer Lockheed Martin, created the single-seat, single-engine F-35 Lightning II. This fighter employs stealth technology and is characterized by its trapezoidal wings and application of the most advanced hi-tech systems, materials and avionics. Designed to attain air superiority, provide close air support and undertake ground attack missions, it has been developed in differing configurations for its varying roles. The F-35B with its STOVL (Short Take Off and Vertical Landing) capability has been specifically designed to operate from modern aircraft carriers such as the British H.M.S. Queen Elizabeth or the Cavour, the flagship of the Italian Navy. The U.S Marines Corps plan to deploy the F-35B in both attack and ground support roles. The STOVL version is powered by the Pratt & Whitney afterburning turbofan and its swivel nozzle, which directs the thrust of the engine. Due in part to its operational flexibility, its advanced on-board technology, innovative design and performance features, the F-35 Lightning II is already a landmark aircraft in the world of 21st century military aviation.

Military aeroplane models

1:48 F-4E Phantom II

€37.99

Article number: 510002770 Product: 1:48 F-4E Phantom II Model Dim.: 40,0 cm SUPER DECALS SHEET FOR 4 VERSIONS Developed by the American aircraft company McDonnell Douglas the F-4 Phantom II is a tandem two-seat, all-weather, supersonic fighter-bomber. It entered service during the sixties and it is one of the most famous airplanes of the military aviation history. In the original project, it was specifically designed for U.S. Navy but it has been used by all U.S. forces and it obtained a significant commercial success around the World. The F-4E version, specifically developed for the U.S. Air Force, adopted a M61 Vulcan cannon in the nose and it could be armed, to perform air-superiority missions, with AIM-9 Sidewinder and AIM-9 Sparrow airto-air missiles. Thanks to its two General Electric J-79 powerful jet-engines, the F-4E was able to reach the top speed of 1,240 Knots. Speed, thrust and reliability were the Phantom II strengths able to successfully counterbalance the reduced maneuverability due to its big dimensions. Detailed Plastic Kit of model F-4E Phantom II in scale 1:48

Military aeroplane models

1:48 F-86E Sabre

€31.99

Article number: 510002799 Product: 1:48 F-86E Sabre Model Dim.: 23,8 cm SUPER DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET The single-engine jet fighter F-86 Sabre was developed by the American aircraft company North American Aviation in the late 1940s and became a key aircraft in terms of post-war military aviation. The F-86 adopted a swept-wing design, incorporated a large front air intake and used the General-Electric J47 jet engine. It was widely used by the U.S.A.F. and played a key role during the Korean War where it could effectively ounter the Soviet fighter Mikoyan-Gurevich Mig-15, in the first jet dogfights in history. Detailed plastic kit in scale 1:48

Military aeroplane models

1:48 F/A-18F U.S. Navy Special Colors

€44.99

Article number: 510002823 Product: 1:48 F/A-18F U.S. Navy Special Colors The Boeing F/A-18E Super Hornet is a modern twin-engine, carrier-capable, single-seat fighter directly derived from the original design of the McDonnell Douglas F/A-18 Hornet. Larger and heavier than its predecessor, it is characterized by significantly improved flight and combat performance. Noticeable evolutionary design changes can best be seen in the revised wing-shape which is able to ensure maximum performance, particularly in terms of maneuverability. Additional design improvements can also be seen in the newer intake ramps for the engines, and also in the enhanced tail design. The aircraft originally entered service with the United States Navy in the early 2000’s to replace the F-14 Tomcat, with the primary role of fleet air defense.

Military helicopters

1:48 IT V-22 OSPREY Tilt Rotor

€39.99

The model IT V-22 OSPREY Tilt Rotor in scale 1/48 has a length of about 289 mm. Decals for one version The V-22 Osprey convertoplane is now being distributed to evaluation divisions of the US Navy and Marines to define piloting and use methods for this new, revolutionary aircraft. Thanks to its large, swing-rotors, the Osprey is able to take off and land just like a helicopter. Once off the ground, thanks to the rotation of its engines, it flies like a normal plane, reaching the speed and range hitherto unheard of for a traditional "chopper". The V-22 is set to replace the old CH-46s as a transport and assault aircraft for the Marines, and in future, it will be used for the Special Forces’ aviation too.

Military aeroplane models

1:48 Ju 87 B-2/R-2 Stuka "Picchiatello"

€41.99

Article number: 510002769 Product: 1:48 Ju 87 B-2/R-2 Stuka "Picchiatello" Model Dim.: 22,9 cm SUPER DECALS SHEET, PHOTO ETCHED PARTS AND COLORED INSTRUCTION SHEET INCLUDED The JU-87 dive bomber is certainly one of the most famous airplanes of World War II. This characteristic "inverted gull wing" aircraft became famous at the early stage of the war and it can be considered, together with the Wehrmacht Panzer Division, the symbol of the "Blitzkrieg". The Italian Regia Aeronautica requested to the German ally, before the beginning of the war, a specific supply of one hundred "Stuka" to equip its ground attack and dive bombing Squadrons. The first Ju-87B units arrived in the summer of 1940 and went to equip the 96º Gruppo Bombardamento a Tuffo. The Ju-87, either in the B2 version or in the extender range R2 version, equipped other "Gruppi di Volo" for a total of 150 planes. The Italian "Stuka", nicknamed "Picchiatello", was used by Regia Aeronautica over Malta, in North Africa, in the Balkans and in the Mediterranean Theatre. Detailed Plastic Kit of model Ju 87 B-2/R-2 Stuka "Picchiatello" Regia Aeronautica in scale 1:48

Military aeroplane models

1:48 Junker Ju-87G-1 Stuka Kanonenvogel

€37.99

Article number: 510002830 Product: 1:48 Junker Ju-87G-1 Stuka Kanonenvogel The JU-87 dive bomber is certainly one of the best known aircraft of WW2. The characteristic "gull wing" aircraft gained great notoriety at the beginning of the war, and is considered, together with the Panzer Divisions of the Wehrmacht, as defining symbols of the Blitzkrieg. During the war, new versions with differing operational profiles were introduced. The Ju-87G was developed as an "anti-tank" version of the Stuka, to counter the vast array of enemy armored vehicles deployed on the eastern front post 1943.The Stuka "ace" Hans Ulrich Rudel proposed the addition of two 37 mm Flak 18 cannons housed in underwing pods to better counter this developing threat. With this configuration the Ju-87G "Kanonenvogel" proved extremely effective in the hands of experienced pilots.   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:48 Junkers JU-87B Stuka Bat.o.Brit.

€39.99

Article number: 510002807 Product: 1:48 Junkers JU-87B Stuka Bat.o.Brit. Model Dim.: 22,9 cm "Battle of Britain 80th Anniversary" Super Decals Sheet The Junkers Ju 87 Stuka was a two-seat dive-bomber/ground-attack aircraft. It first flew in 1935 and made its combat debut in 1936 as part of the Condor Legion during the Spanish Civil War. The aircraft was easily recognizable by its inverted gull wings and fixed landing gear. The Stuka's design included several innovative features including automatic pull-up dive brakes set under both wings to ensure that the plane recovered from its attack dive, even if the pilot blacked out from the acceleration. It soon became the iconic aircraft of the German ‘Blitzkrieg’ during the first stages of the Second World War, where it provided close air support to the Wehrmacht Panzer Divisions. It was also used by the Luftwaffe during the Battle of Britain, where it’s weaknesses became apparent in comparison to the faster and better armed, more modern fighters, such as the Hurricane and Spitfire. Detailed plastic kit

Military aeroplane models

1:48 Macchi MC. 200 Series XXI-XXIII

€35.99

Article number: 510002767 Product: 1:48 Macchi MC. 200 Series XXI-XXIII Designed by the celebre engineer Mario Castoldi, the Macchi Mc 200 has represented a significant production evolution of the Italian fighter aircrafts. Compared to the biplanes Fiat CR 32 and Fiat CR 42 that were the main Italian fighters squadrons structure at the beginning of the Second World War, the Macchi Mc 200 distinguished itself, together with its contemporary Fiat G50, for its monoplane configuration and for the entire metallic airframe structure. The 14 radial cylinder Fiat A.74 RC 38 double star engine was able to release 840 HP and allowing the Macchi Mc 200 to reach speeds of 500 Km/H. In comparison with the Allied fighters, it resulted to be underpowered and, neither the less, a lower fire capacity. Two 12,7mm Breda-SAFAT machineguns mounted over the characteristic engine bulged nacelle, were the only onboard armament available. In the latest versions, two additional 7,7mm Breda-SAFAT machineguns were incorporated in the wings. It has been deployed by the Regia Aeronautica on the main Second World War fronts: Africa, Mediterranean Sea, Balkans and in Russia. Detailed Plastic Kit

Military aeroplane models

1:48 Mirage III E

€35.99

Article number: 510002816 Product: 1:48 Mirage III E The Dassault Mirage III represents a landmark in French aerospace production. Produced from the early 1960s to equip units of the Armée de l'Air, it proved to be extremely effective right from the start. It quickly became a commercial success and was exported to numerous countries, participating in various conflicts during the 1970s and 1980s. Characterized by its distinctive delta wing, it was capable, thanks to its Snecma Atar engine with afterburner, of exceeding Mach 2 speeds. Following the Mirage IIIC, designed for the interceptor role, a multirole and ground-attack version was developed. This led to the Mirage IIIE, characterized aerodynamically by a lengthening of the fuselage to accommodate improved avionics. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:48 Northrop F-5E Tiger II

€31.49

The Northrop F-5 was developed during the 1960s to meet the requirements of a number of NATO countries that needed a simple, cheap and easy to maintain multi-role fighter. Its airframe inspired the subsequent introduction of the F-5E Tiger II in the early 1970s. Equipped with two new J85-GE-21 jet engines capable of providing much higher power and thrust than the previous version, it was characterized by a longer and enlarged fuselage. The improved flight performance arising from the new aerodynamic lay-out, the greater operational range and the updated avionics, allowed the Tiger II to be used successfully by numerous air forces. The basic armaments were two 20 mm cannons installed in the nose under the cabin, supported by the capability to deploy a wide set of air-to-air missiles. In addition to its primary fighter role it still however retained extensive ground attack capabilities. Detailed plastic kit

Military helicopters

1:48 OH-13 Scout Helicopter Korea War

€24.99

Article number: 510002820 Product: 1:48 OH-13 Scout Helicopter Korea War The American Bell H-13 is one of the most iconic helicopters in aviation history. Developed immediately after the Second World War, it was distributed to the U.S. Army in the late 1940s. The "Sioux" was characterized by its distinctive "soap bubble canopy" which made it unique and easily recognizable along with the tail trellis and its two side tanks. The OH-13 was deployed in large numbers during the Korean War to carry out a wide variety of tasks including observation, advanced reconnaissance, and medical evacuation. The OH-13 had a three-seater cabin configuration and could reach a top speed of170 km / h. It was both robust and exceptionally reliable which contributed to its operational longevity. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35

Military aeroplane models

1:48 P-47D Thunderbolt E.T.O.

€34.99

Article number: 510002835 Product: 1:48 P-47D Thunderbolt (E.T.O.) The Republic P-47D Thunderbolt undoubtedly holds a significant role in the history of military aviation. This single-seat, low-wing American fighter-bomber was notable for its powerful Pratt & Whitney R-2800 radial engine, which produced over 2,000 HP, enabling it to achieve remarkable speeds, particularly at higher altitudes, and to offer extraordinary operational flexibility. The P-47 was effective both as a fighter, providing escort to bombers, and as a lethal aircraft for ground support and attack missions. Its airframe was exceptionally robust, and it was heavily armed with eight 12.7 mm Browning M2 machine guns. Additionally, it could be equipped with bombs and rockets to enhance its offensive capabilities. The P-47 was successfully employed by the United States from 1943 onwards across various operational theaters. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:48 Tornado GR.1/IDS - Gulf War

€35.99

Article number: 510002783 Product: 1:48 Tornado GR.1/IDS - Gulf War Model Dim.: 38,1 cm SUPER DECAL SHEET The multirole Tornado is a twin-engine combat aircraft with a variable-sweep wing. This kind of aircraft is the result of a joint development project carried out by British, German and Italian companies. Although during its lifetime it has been used for several purposes (ground attack, electronic combat/reconnaissance, interceptor), its main role has always been to perform low-altitude penetrating strike missions. Tornado can load and use a powerful and varied set of offensive weapons. Thanks to its two powerful afterburning turbofans, the Tornado can reach the max speed of Mach 2.2. The Tornado baptism of fire took place in 1991 during the Gulf War. More in detail, the air campaign of the Gulf War, in which the Italian Tornados IDS took part, began on 17th January. The goal of the aerial bombing campaign was the suppression of military targets and infrastructures.

Military helicopters

1:48 UH-1D "Slick"

€25.99

Article number: 510000849 Product: 1:48 UH-1D "Slick" Model Dim.: 27,0 cm This robust helicopter was first intoduced during the mid-fifties and may be the known rotor-blade aircraft world-wide. Reliability is its greatest feature. It was designed for the U.S. Army during the Vietnam war. Thousands of UH-ls are in service as transport, ambulance and attack aircraft. Licensed production in Italy, Germany and Japan make it part of the armed and police forces of more than fifty nations. Presently twin-engine versions (Italeri kit no. 847) are being produced. This helicopter may well serve for the next twenty years or more.

Military helicopters

1:48 UH-60A Black Hawk "Night Raid"

€28.99

Article number: 510002706 Product: 1/48 UH-60A Black Hawk Night Raid Model Dim.: 31,7 cm Decals for 2 versions The Black Hawk is the Army’s front-line utility helicopter used for air assault, air cavalry and aeromedicals evacuation units. It is designed to carry 11 combat-loaded air assault troops and it is capable of moving a 105 mm. Howitzer and 30 rounds of ammunition. First deployed in 1978, the Black Hawk’s advanced technology makes it easy to maintain in the field. The Black Hawk has performed admirably in a variety of missions, including air assault, air cavalry and aeromedicals evacuations, including Operation Enduring Freedom in Afghanistan and Operation Iraqi Freedom in Iraq. In addition, modified Black Hawks operate as special operations platforms.

Military aeroplane models

1:48 US F-22A Raptor

€34.99

Article number: 510002822 Product: 1:48 US F-22A Raptor The Lockheed Martin-Boeing F-22 is a 5th generation USAF stealth fighter aircraft. Extremely innovative in concept and design, the "Raptor" is equipped with two Pratt & Whitney F119 turbofan engines, with afterburners capable of generating vector thrust via its exhaust nozzles. The "stealth" capability is provided through the aerodynamic profile and the use of high-tech materials capable of minimizing radar detectability. Evasion capability is further aided by detailed design engineering of the air intakes and exhausts to reduce heat generation from exhaust gases and also noise emission reduction. The air-to-air and air-to-surface armament systems are installed in loading bays within the fuselage in order to further minimize radar detection. The aircraft avionics are extremely advanced and able to detect, track and acquire targets even at long range. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35   Warning! Not suitable for children under 14 years.

Military helicopters

1:48 Wessex UH.5

€48.99

Article number: 510002720 Product: 1:48 Wessex UH.5 Helikopter The Wessex, easily recognizable by its distinctive line characterized the cockpit placed high, was produced by the British Westland under license. It was based on the American helicopter Sikorsky S-58 "Choctaw" project with the adoption of a British turbine-powered 1,200 HP Rolls-Royce engine. The Wessex has proved an extraordinary longevity. It was, for nearly three decades, employed by the British Royal Navy to carry out, in its different versions, many operational tasks. The Wessex UH.5, one of the latest version of Westland helicopter, was used during the period of Falklands War in the South Atlantic on 1982, and it was specialized to satisfy the tactical transportation needs of artillery, ammunitions and missile systems. Thanks to its reliability, Wessex UH.5 has also been used for more though duties: the transportation of Royal Marines Commandos during assault and infiltration operations. Detailed plastic kit

Model tanks

1:56 Char B1 Bis

€21.99

Article number: 510025766 Product: 1:56 Char B1 Bis The "Char de Bataille" B1 was the main battle tank used by the French army during the Second World War. The original design was conceived in the mid-1920s (many technical solutions adopted, such as the large exposed tracks, are indeed typical of that period), but it began to be deployed to units only in the mid-1930s. Sturdy and massive, it was improved in its "bis" version to enhance performance and operational capability. It was armed with a 47mm turret cannon and a 75mm howitzer installed in a casemate at the front of the tank. Although it was generally a good tank for the period, the Char B1 bis was employed to support infantry divisions rather than in autonomous armored groups that would have provided greater operational flexibility against German Panzer divisions during the 1940 Campaign in France. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Model tanks

1:56 Cromwell MK. IV

€21.99

Article number: 510025754 Product: 1:56 Cromwell MK. IV The Cromwell tank was developed during the Second World War by the British Army to replace the outdated Crusader in the role of "Cruiser Tank." The Cromwell was characterized by its very high speed, which could reach over 60 km/h, and great manoeuvrability. While speed was often limited to prevent excessive wear on the tank's mechanics, especially its suspension, it was balanced with decent armor and good armament. The main 75mm gun mounted in the turret was powerful enough in engagements against similar armored vehicles and could use the same ammunition as other Allied tanks like the American Sherman. Additionally, the Cromwell effectively served in the close support role for infantry. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Model tanks

1:56 Italians Tanks & Semoventi

€21.99

Article number: 510025768 Product: 1:56 Italienische Panzer & Semoventi The production of Italian tanks during the Second World War focused on the "M" series. The M-13/40 was the most famous and widely used tank of the Royal Army. Equipped with a 47mm cannon, it was notable for its unique track and suspension structure and for the protective "bolted" armor. On its chassis, the self-propelled gun M-40 was also developed. Armed with a 75mm howitzer mounted in a casemate, it was greatly feared by enemy armored vehicles. The best results were achieved through the combined use of M-13/40 tanks accompanied by self-propelled guns, which compensated for the tank's limited firepower. Throughout the war, both tanks and self-propelled guns saw improvements in technical solutions and armament. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Model tanks

1:56 JS-2 Stalin

€21.99

In February 1943, to replace the now outdated KV tanks, the first prototype models of heavy tanks intended to equip the armored units of the Red Army were produced. The most notable of the tanks developed to counter the new and heavily armored German vehicles, such as the Tiger and the Panther, was the Joseph Stalin JS-2. Armed with the powerful 122 mm cannon installed in a centrally mounted turret, it was characterized by a cast steel hull, heavy armor, and the adoption of a 12-cylinder diesel engine with over 600 HP. The overall weight of the tank was 46 tons. It was employed in the battles that led to the recapture of Ukraine, operational activities in Hungary, and, in the final phase of the conflict, during the Battle of Berlin. It was one of the most powerful tanks used by the Soviet Union during World War II.

Model tanks

1:56 M8/M20 Greyhound

€21.99

Article number: 510025759 Product: 1:56 M8/M20 Greyhound At the beginning of World War II, the U.S. Army had lightweight and lightly armed vehicles, called "scout cars," for advanced reconnaissance activities. Developed during the war, the M-8 Greyhound armored car, characterized by increased protection and heavier armament, represented a turning point for the American army. The vehicle provided greater operational flexibility and could be more effectively used to support ground troops thanks to the 37mm cannon installed in the turret. First used on the Italian front, from Monte Cassino to Anzio, it later participated in the D-Day operations in June 1944. Although the terrain in Normandy proved challenging and demanding during the initial phases of the operation, later on the M-8 was particularly appreciated for its speed of movement and versatility in deployment. The M-20 version was developed from the M8 version for Military Police duties and command vehicle roles. Detailed model kit   Warning! Not suitable for children under 14 years.

Model tanks

1:56 Pz.Kpfw. III Ausf. J/L/M/N

€21.99

Article number: 510025757 Product: 1:56 Pz.Kpfw. III Ausf. J/L/M/N The development of the medium tank Panzerkampfwagen III began in the mid-1930s, with the intention of making it the backbone of the armored units of the Wehrmacht. It was a key player in the Blitzkrieg and the early stages of the Second World War. Over time, in its various produced versions, it adopted a more effective main armament. Starting from the 37mm of the early production series, it was equipped with cannons ranging up to 75mm in caliber, enabling it to counter superior armored vehicles. Throughout the war, it was also upgraded in armor and often fitted with additional protections to increase its battlefield resilience. However, starting from 1943, the technological gap compared to adversary tanks progressively led to the replacement of the Panzer III with more modern and heavily armed vehicles. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Model tanks

1:56 Pz.Kpfw. VI Tiger I Ausf. E

€21.99

The Panzerkampfwagen VI Tiger I is undoubtedly one of the most famous tanks of World War II. It was developed to provide the armored divisions of the Wehrmacht with a heavily armored and heavily armed tank to complement the more common medium tanks, Panzer III and Panzer IV, which were no longer effectively countering enemy tanks. Its primary armament consisted of the renowned and lethal long-barreled 88mm KwK 36 L/56 anti-tank gun. Installed in the turret and protected by a heavy 120mm shielding, it could penetrate the armor of any contemporary enemy vehicle even at long distances. Deployed on all major theatres of operation, it played an active role in German military operations in Normandy and the Western Front. Despite facing issues of reliability and deployment, the heavy tank, when operated by skilled crews, was always greatly feared by the Allied forces. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Model tanks

1:56 Sd.Kfz. 142/1 StuG III

€21.99

Article number: 510025756 Product: 1:56 Sd.Kfz. 142/1 StuG III Born to provide fire support to the German infantry according to the tactical concepts of Blitzkrieg, the SturmGeschütz III evolved during the war into new and more advanced versions with a different mission profile. On the Eastern Front, encounters with the more powerful and innovative Soviet tanks led to an expansion of its role, transitioning from supporting infantry squads to serving as an effective anti-tank armored vehicle. Simple and cost-effective in construction, it was one of the most produced vehicles by German industries until the end of the war. With the introduction of the "G" version specialized in the anti-tank role, the version armed with a 105 mm howitzer (Sturmhaubitze 42) was also introduced.   Warning! Not suitable for children under 14 years.

Model tanks

1:56 Sd.Kfz. 171 Panther Ausf. A

€21.99

Article number: 510025752 Product: 1:56 Sd.Kfz. 171 Panther Ausf. A The Panzerkampfwagen V "Panther" is widely recognised as one of the best tanks that was produced during World War 2. It was deployed as a direct response to the Soviet T-34 and KV-1 tanks on the Eastern Front, which were superior to both the Panzer III and Panzer IV in terms of performance and armaments. Powered by a 700 horsepower V-12 Mayback engine, it was armed with the 75 mm KwK 42 high speed gun which was a very effective anti-tank weapon. The Panther was designed with optimal armor protection, including inclined front armor. Its overall mobility, speed and armaments made the Panther one of the leading tanks of the period, and ensured its deployment on all of the main operational fronts, from the East through Italy and France. Detailed model kit   Warning! Not suitable for children under 14 years.

Model tanks

1:56 Sherman M4A3E8 Fury

€21.99

Article number: 510025772 Product: 1:56 Sherman M4A3E8 Fury The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units ant it formed the backbone of United Stated armoured forces during at those time. it has been produced in several variants and versions The production of the M4A3E8 versions started at the end of 1944. The M4A3E8, adopting the nickname Easy Eight, took several technical improvements enhancing the Sherman operational effectiveness. The 76mm M1 high velocity gun had been flanked by a new horizontal volute spring suspension (HVSS) system able to ensure a better driving condition and to guarantee a higher speed. The "Easy Eight" participated to the final stages of World War II and took active part in the Korean War.   Warning! Not suitable for children under 14 years.

Model tanks

1:56 US M4 Sherman (75 mm)

€21.99

Article number: 510025751 Product: 1:56 US M4 Sherman (75 mm) The M4 Sherman medium tank was undoubtedly the most widespread and utilized armored vehicle during the Second World War. The M4 formed the backbone of the American armored forces and was produced in numerous versions and variants. The first model to enter large-scale production was the Sherman M4A1, characterized by its rounded hull and cast turret. Early Shermans were equipped with a 75mm gun, later replaced by a high-velocity 76mm gun. The Sherman M4A1 entered service in 1942 and equipped the armored units of the United States Army in the early months of the war. However, its true strength lay in its design. The Sherman was economical, reliable, and easy to mass-produce.   Warning! Not suitable for children under 14 years.

Model figures

1:72 100 Years War - British Warriors

€10.99

Article number: 510006027 Product: 1:72 100 Years War - British Warriors On October 25th, near Agincourt, Henry V's English army, largely composed of foot troops and a small contingent of noble knights, defeated the army of the Constable of France Charles d'Albret, a much larger force boasting the best heavy cavalry in Europe. The English success was determined by the use of the Welsh longbow. This weapon was easy to use, even after a short training. It could hit at 200 yards and penetrate the armor of knights.

Model tanks

1:72 15cm FieldHowitzer/ 10,5cm FieldGun

€19.99

Article number: 510007082 Product: 1:72 15cm FieldHowitzer/ 10,5cm FieldGun Model Dim.: 12,0 cm 100% NEW MOULDS - FULLY DETAILED MODEL - DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET CONTAINS ONE MODEL AND 5 FIGURES The 150 mm SFH18 howitzer was widely deployed by the Wehrmacht on all of the key fronts during WW11. It was developed during the ’20s and ‘30s by Rheinmetall and Krupp, one of the main artillery companies in Germany, with a view to optimizing resources and technological capabilities within the parameters imposed by the Treaty of Versailles. From 1933 onwards, Germany's rearmament planning became ever more ambitious, with a particularly significant increase in the production of howitzers and field cannons. The SFH18 had a simple and reliable structure with a maximum range of 13.5 km. It could be divided into two sections and towed by horses, or more often during the war, by half-tracks. The SFH18 had a seven-man crew. A 105 mm calibre version was developed on the same carriage, (sK 10,5 cm)which was characterized by the longer barrel, but was produced in few specimens as much heavier than the standard 105 mm leFH18, which was the field artillery cannon supplied to the Wehrmacht. Detailed plastic kit

Military figures & accessories

1:72 2nd WW American Infantry

€10.99

Article number: 510006046 Product: 1:72 WWII American Infantry The 1st Infantry Division , better known as "the big red one", represents the prototype of U.S. Infantry troops during World War II. It took part in Operation Torch (November 1942), the landing in Sicily, the landing in Normandy (June 6th, 1944), the battle of the Ardennes and the final advance into German territory in 1945. The models in this kit are represented with the typical equipment of American infantry: the M1 Garand rifle, the B.A.R. automatic rifle, the M3 "Grease Gun" submachinegun and the famous Bazooka. Contains 50 figures.

Military aeroplane models

1:72 A-10 GULF WAR

€22.99

Article number: 510101376 Product: 1/72 A-10 Gulf War Model Dim.: 22,6 cm SUPER DECALS SHEET FOR 4 VERSIONS The A-10 Thunderbolt II was developed by Fairchild Republic in the seventies with the purpose to create, accordingly the needs of USAF, a powerful aircraft capable to perform close air support missions including attacking tanks and armoured vehicles. The Thunderbolt II is heavily armoured and exceptionally tough. It is characterised by the two General Electric turbofan engines and the adoption of one of the most powerful aircraft gun ever flown : the 30 mm. GAU-8/A Avenger Gatling. Thanks to its eleven underwing and under fuselage pillars, the A-10 can carry an impressive offensive pay-load. The A-10 was used in combat for the first time during the Gulf War in 1991 and it has showed its operational effectiveness destroying more than 900 enemy tanks.

Military aeroplane models

1:72 A-6E Tram Intruder

€27.99

Article number: 510101392 Product: 1:72 A-6E Tram Intruder Model Dim.: 23 cm SUPER DECALS SHEET FOR 2 VERSIONS - COLOR INSTRUCTION SHEET The A-6 Intruder entered service in the mid-60s as ground attack carrier based aircraft to replace the outdated planes as the propeller-driven A-1 Skyraider and the A-3 Skywarrior. The Grumman Corporation developed and designed the A-6A, based on U.S. Navy specifications, a twin jet-engine all-weather medium attack aircraft able to operate from the American aircraft carriers. The so called "Intruder" was characterized by a sturdy and robust fuselage and for the two seats side by side cabin configuration for the pilot and the weapons officer. The A-6E was the definitive attack version of the "Intruder" improved in avionics and attack systems, in particular in the version named TRAM, from the acronym of the laser target designation system, that allowed to be more effective to perform "all weather" missions and to be more lethal in detection and suppression of enemy targets. Thanks to its hardpoints under the wing the A-6E Intruder was able to load an impressive offensive armament as conventional bombs, Paveway laser-guided bombs, Harpoon anti-ship missiles, HARM anti-radar missiles. It actively participated either from ground bases or from the carriers of the U.S. Navy, to Desert Storm campaign combat missions. Detailed Plastic Kit of model A-6E Tram Intruder in scale 1:700

Military aeroplane models

1:72 A-7E Corsair II

€22.99

Article number: 510001411 Product: 1:72 A-7E Corsair II Length of the model 195 mm COLORS INSTRUCTIONS SHEET - SUPER DECALS SHEET FOR 4 VERSIONS The LTV A-7 Corsair II was designed and implemented in the first half of the 1960s to satisfy the specific United States Navy request to have a new carrier-capable light attack aircraft able to replace the Douglas A-4 Skyhawk and the piston-powered Douglas A-1 Skyraider. It was directly developed by the fighter Vought F-8 Crusade airframe. The A-7 was characterised by the large frontal air intake under the cabin, by the 35° foldable swept wing to optimize the use and the storage on the aircraft carriers flight decks and by the adoption of a modern Head-up-Display to enhance the operational effectiveness. Thanks to its underwing hardpoints the A-7 was able to carry an impressive offensive load based on conventional bombs, guided bombs as the Paveway and air-to-surface missiles. The A-7E was the last version produced for the U.S Navy with an improved operational capabilities and the possibility to use the Harpoon anti-ship missiles and the AGM-88 HARM anti-radiation Missiles. Detailed Plastic Kit of model A-7E Corsair II in scale 1:72

Military aeroplane models

1:72 AMX Ghibli

€29.99

Article number: 510001460 Product: 1:72 AMX Ghibli The AMX "Ghibli" single-engine ground attack aircraft was the result of a collaborative project between the Italian and Brazilian aviation industries. The project was initiated in the 1980s to replace the dated Italian Air Force’s Fiat G-91Y fighter-bomber. The Brazilian Air Force also needed to replace their Italian made MB-326s. The AMX had an aerodynamic lay-out characterized by a high swept wing, and with its Rolls-Royce Spey 807 engine could attain a maximum speed of 1,000 km / h. The Italian version was armed with a 20 mm M61 cannon and could carry an offensive payload of 3,800 kg. The Ghibli was deployed in several operational theaters (eg Afghanistan, Libya) to undertake advanced reconnaissance missions and also to provide close tactical support to ground troops. Detailed plastic kit in scale 1:32   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 AMX-T Twin Seater

€29.99

Article number: 510001471 Product: 1:72 AMX-T Twin Seater The AMX "Ghibli" single-engine ground attack aircraft was the result of a collaborative project between the Italian and Brazilian aviation industries. The project was initiated in the 1980s to replace the dated Italian Air Force’s Fiat G-91Y fighter-bomber. The Brazilian Air Force also needed to replace their Italian made MB-326s. The AMX had an aerodynamic lay-out characterized by a high swept wing, and with its Rolls-Royce Spey 807 engine could attain a maximum speed of 1,000 km / h. The Italian version was armed with a 20 mm M61 cannon and could carry an offensive payload of 3,800 kg. The two-seat AMX-T version was established and developed as an advanced training aircraft, but it could also be deployed on combat missions in a ground attack and close support role. Italy acquired 26 AXM-T’s for the Italian Air Force. Detailed Plastic Kit

Military figures & accessories

1:72 Antitank obstacles

€9.49

Article number: 510006147 Product: 1/72 Antitank obstacles A complete set of antitank obstacles to create dioramas with the highest realistic level.

Military figures & accessories

1:72 AS.51 HORSA Mk.I/II & Brit. Paratr.

€31.49

Article number: 510101356 Product: 1:72 AS.51 HORSA Mk.I/II & Brit. Paratr. Model Dim.: 28,4 cm D-DAY SERIES - NORMANDY 1944/2014 THE BOX CONTAINS 13 HARD PLASTIC MULTIPLEPOSES FIGURES Decals for one version Well-know English glider able to transport more than 25 troops or a large amount of war material and supplies in its long fuselage. It took part in the main airborne landings of World War Two but its name is particularly connected to the two most famous ventures of the Allied airborne troops: the landing in Normandy and the attack to the Arnhem bridge in the Netherlands.

Military aeroplane models

1:72 AV-8A Harrier

€22.49

Article number: 510001410 Product: 1:72 AV-8A Harrier Length of the model: 153 mm SUPER DECALS SHEET The Harrier is probably the most famous aircraft with vertical/short takeoff and landing capabilities of military History. Designed and developed by the British manufacturer Hawker Siddeley in the sixties, it was largely used, in its various versions, by British Royal Air Force and Royal Navy. The United State Marine Corps showed a significant interest in the aircraft that could be the ideal answer the operating needs. The single-seat AV-8A was specifically developed for the USMC and entered service in 1971, in the Marines’ attack squadrons. The AV-8A was able to operate from the ground bases and from the converted amphibious assault ships. The AV-8A could successfully perform close support, ground attack and air defence duties. It was very appreciate by USMC in fact the AV-8A was fully integrated with the other landing vehicles and helicopters during the Amphibious assault operations. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 B-52G Stratofortress

€74.99

Article number: 500771378 Product:1:72 B-52G Stratofortress Model Dim.: 67,4 cm SUPER DECALS SHEETS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET INCLUDED The B-52 Stratofortress is the most famous long range jet-powered strategic bomber in the aviation history. Produced by the American company Boeing since 1955 it has been, for a long time, a symbol of the Cold War. It has been, for several years, the backbone of the United States Air Force Strategic Air Command. The B-52 has been produced in a significant number of versions that has gradually evolved the successful project to better answer to the changing in operational needs. The "G" version is the most produced B-52 variant and it has been delivered to the S.A.C. wings from the early 60s. It has been characterized by a large number of changes implemented as a more strong structure, the adoption of new avionic systems and, important issue for a strategic bomber, the longer operational range thanks to the increased fuel capacity and the possibility to adopt external fuel tanks. The B-52G took also part in Operation Desert Storm in 1991. Detailed Plastic Kit of model B-52G Stratofortress in scale 1:72

Military figures & accessories

1:72 Battle of Normandy St.-Mère-Église

€74.99

Within the overall strategic planning of the acclaimed operation "Overlord", the code name for the Allied landings on the beaches of Normandy, the French village of Sainte-Mère-Église played a key role. On battle plan maps it was rightly identified as an important road junction that the defending Germans could have used to carry out rapid counter attacks directed towards the Utah and Omaha beacheads. It was therefore strategically imortant to attack and quickly occupy the village with American airborne troops to support the landings. In the early hours of June 6, 1944, paratroopers of the famous 82nd and 101st US Airborne Divisions secured the small French town following a period of intense fighting. The contribution made by the American paratroops has been widely recognised and celebrated in numerous movies from "The Longest Day" made in the 1960s, to the most recent "warmovies". Detailed Plastic Kit

Military figures & accessories

1:72 Battle-Set 1945 Fall of the Reich

€92.99

Article number: 510006195 Product: 1:72 Battle-Set 1945 Fall of the Reich Model Dim.: 68 x 30 cm Laser-cut MDF Reichstag - Russian & German infantry T-34/85 russian tank - FlaK 37 8,8 cm gun with crew Size of the model 68 cm The "Battle of Berlin" heralded the end of the Second World War in the European theatre. This major offensive launched by the Soviet Red Army, after passing the German defensive lines on the Oder River, moved directly to the capital of the Third Reich. The city itself was defended by Wehrmacht, Waffen-SS, "Hitlerjugend" and "Volkssturm" soldiers, and was the setting for the final and most fierce clashes of the war. The Soviet forces, led by Marshal Zhukov and Marshal Konev, with an overwhelming superiority of soldiers, vehicles and artillery, forced the surrender and capitulation of the city on May 2, 1945. The Reichstag building, seat of the Reich parliament, had a huge symbolic value and was the stage for the final acts of the conflict in Europe. The Red Army soldier raising the Soviet flag on the ruins of the Reichstag at the end of the battle of Berlin, is one of the most iconic images of the Second World War. Detailed plastic kit in scale 1:72

Military figures & accessories

1:72 Battle-Set Waterloo La Haye Sainte

€74.99

Article number: 510006197 Product: 1:72 Battle-Set Waterloo La Haye Sainte From 16th to 18th June the French troops and the Allied troops clashed on battlefields of Belgium. The battles of Ligny and Quatre Bras were only the proem of the most famous and well-known battle of the military history. A date and a place: 18th June 1815, Waterloo. Wellington considered the farm of La Haie Sainte a strategic point of his defensive line. In the afternoon, Napoleon ordered to Marshal Ney to launch the assault to the farm in order to obtain a significant outpost. The farm was strenuously defended by Allied troops, that had fortified the buildings since the morning. The clash was fierce and the French troops, supported by artillery, were able to conquer La Haie Sainte only in the late afternoon. At 7 p.m., thanks to the strategic value of the farm, the French Imperial Guard can start the assault but it is too late. Prussian troops leaded by Blucher, vainly searched by Marshal Grouchy, break on the battlefield to support British Army. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Military figures & accessories

1:72 Battle-Set-"Pegasus Bridge"

€79.99

Article number: 510006194 Product: 1:72 Battle-Set-"Pegasus Bridge" D-DAY 75th ANNIVERSARY MDF laser cut bridge, english paratroopers, german infantry, Kfz. 305 Opel Blitz, Kdf.1 Kubelwagen,german artillery On the night between 5th and 6th June 1944, during the early stages of the Operation Overlord the 6th British Airborne Division received the goal to capture and control the movable bridge that crossed the Orne River near the city of Ouistreham in Normandy. The control of the bridge, renamed in code "Pegasus" was a key point to make secure the eastern flank of the operational scenario and to prevent German armour troops counterattack that could reach the Allied landing area at Sword beach. The British paratroopers, in Horsa gliders, landed near the bridge and, thanks to a rapid and effective action, defeated the German troops that defended the bridge. Even today the Pegasus Bridge is a point of reference for all those who visit the most significant places of "Overlord” Detailed plastic kit

Model figures

1:72 Battlefield Accessories

€14.99

Military figures & accessories

1:72 Battlefield accessories WWII

€9.49

  Warning! Not suitable for children under 14 years.

Model tanks

1:72 Brit. Churchill Mk. III

€17.99

Article number: 510007083 Product: 1:72 Brit. Churchill Mk. III The Churchill medium tank came into service with the British Army in 1942 to support and replace the earlier Valentines, Matildas and Crusaders, which, by then, were all outdated and inadequate in terms of both armor and weaponry, easily falling prey to the more advanced German tanks. Equipped with thick armor and a reliable engine, it proved to be tough and dependable, later being produced in ever-more efficient, upgraded versions. Its chassis was also used as a platform for specialized support vehicles such as the mine clearer, the bridge layer and the flame-thrower. Detailed plastic kit

Model figures

1:72 British & Prussian General Staff

€10.99

Article number: 510006065 Product: 1/72 BRITISH & PRUSSIAN GENERAL STAFF After Napoleon's return from his exile on Elba, the Seventh Coalition was hastily gathered. It comprised the main European powers opposing the French Emperor's return. The main proponents were England and Prussia. The kit represents the meeting, on Waterloo battlefield, of the two commanders in chief of the allied armies: the Duke of Wellington and the Prussian Marshal Von Blücher. Detailed Plastic Kit of model British & Prussian General Staff in scale 1:72

Model figures

1:72 British Heavy Cavalry Napol. Wars

€10.99

Article number: 510006001 Product: 1/72 British Heavy Cavalry Napol. Wars During the battle of Waterloo the heavy cavalry Regiments of Ponsonby Union Brigade, under the command of the Earl of Uxbridge, was formed by 3 squadrons : the "Royals", the "Scots Grey" and the "Inniskillings." The very famous Union Brigade cavalry charge against the lines of Napoleon, also represented in numerous prints and paintings of the time, contributed significantly to the result of one of the most famous battles of History. Contents 18 horsemen.

Military figures & accessories

1:72 British Paratroopers

€10.99

Article number: 510006034 Product: 1/72 British Paratroopers The men of the British 1st Airborne Division, nicknamed "Red Devils", took part in Operation Market Garden in September 1944. Planned by General Montgomery, it envisaged the fast conquest of the bridges on the Rhein and the Meuse via airborne British, American and Polish troops to secure the advance of Allied armored units into Germany's industrial heartland. But the operation was unsuccessful and the advance into the Ruhr was possible only four months later. Contents 50 figures.

Military aeroplane models

1:72 British Stirling Mk. III

€49.99

Article number: 510001462 Product: 1:72 British Stirling Mk. III The Short Stirling was the first four-engined British heavy bomber of the Second World War. The design had high wing, four engines and the cabin elevated over the fuselage. The airframe was fully made in metal. Another features that characterised the bomber was the impressive size of the landing gears. The first bombers went to equip the Royal Air Force Bomber Command Squadrons from the end of 1940. The Operational status was reached on January 1941 and the first war mission was dated February 1941 against logistic installation in Rotterdam. Stirling Mk. I was able to carry a significant offensive load of over 6,000 Kg of bombs and was armed with eight 7.7 mm machine guns for defence. The direct successor of the Mk.I version was the Mk.III, fitted with new and improved Bristol Hercules XVI engines and enhanced defensive armaments Detailed plastic kit in scale 1:32

Military aeroplane models

1:72 C-130 E/H Hercules

€51.99

Article number: 510000015 Product: 1:72 C-130 E/H Hercules Model Dim.: 39 cm Decals for 5 versions The C-130 is by far the most widely used tactical cargo plane of the last forty years. Notwithstanding its age no real replacement has been built so far. Therefore the four-engine Loockheed Aircraft continues to serve in many different functions with more than fifty Air Forces around the world. Continuous up- dating of its electronic equipment and in some cases stuctural changes of the fuselage are extending the life span of this most successful military cargo aircraft. Its characteristic sturdiness and reliability have once again been demonstrated during the Gulf War Operations of Desert Shield and Desert Storm.

Military aeroplane models

1:72 Caproni CA.313/314 Vintage

€31.99

Article number: 510000106 Product: 1:72 Caproni CA.313/314 Vintage The twin-engined Ca.313 was developed by Italian aeronautical company Caproni in the late 1930s. Inspired by the Caproni Ca. 310 Libeccio, it was used by the Regia Aeronautica during the Second World War to undertake light bombing, aerial observation and reconnaissance missions. The two 12-cylinder Isotta Fraschini Delta RC 35 engines delivered 730 hp and allowed the Caproni to attain a maximum speed of 430 km / h. The engines powered three-blade metal propellers with variable pitch. The Ca.314 version was modified for use in other roles such as ground attack, maritime reconnaissance, convoy escort and as a torpedo bomber. The "Caproni" were deployed by the Regia Aeronautica on various operational fronts in the Mediterranean and North Africa. They were also used by the Swedish Air Force and the German Luftwaffe.

Military aeroplane models

1:72 Carrier Deck section (4)

€28.99

Article number: 510001326 Product: 1:72 Carrier Deck section (4) Model Dim.: 40,5 x 23,5 cm 100% NEW MOULDS - FIGURES AND AIRCRAFT NOT INCLUDED The kit allows you to make a flight deck section of a modern aircraft carrier. Great care in the details of the atapult and of the Jet Blaster Deflector used to prevent possible damages generated by the aircraft exhausts lasts during the take-off. The Jet blast deflector is raised and lowered by hydraulic cylinders reproduced in the scale model kit. The carrier deck section is the ideal scenario to build up interesting dioramas with carrier-based aircrafts scale models.

Model figures

1:72 Confederate Cavalry

€10.99

Article number: 510006011 Product: 1/72 Confederate Cavalry The cavalry regiments were considered the elite forces of the Confederate armies during the American Civil War. The uniforms were characterized by the yellow gallons. Very varied the individual weapons as well as the customized uniforms. Among the most famous cavalry commanders, James Ewell Braun (J.E.B.) Stuart, who became famous for his bravery during the First Battle of Bull Run. Contents 1 figur and 16 horsemen.

Military figures & accessories

1:72 Confederate Inf. (Amer.Civil War)

€10.99

Article number: 510006178 Product: 1/72 Confederate Infantry (Amer.Civil War) THE BOX INCLUDES 50 FIGURES. The Army of the Southern states was formed in 1861. The largest contingent was formed by men from Virginia, most of whom were volunteers and not professional soldiers. A lot of equipment was not standardized and the uniforms were quite diverse. The Confederate army was led by Robert E. Lee, a great general both on the battlefield and as a strategist. Detailed Plastic Kit of model Confederate Inf. (Amer.Civil War) in scale 1:72

Model figures

1:72 Confederate Troops "The Grays"

€10.99

Article number: 510006014 Product: 1:72 Confederate Troops "The Grays" The Army of the Southern states was formed in 1861. The largest contingent was formed by men from Virginia, most of whom were volunteers and not professional soldiers. A lot of equipment was not standardized and the uniforms were quite diverse. The Confederate army was led by Robert E. Lee, a great general both on the battlefield and as a strategist. Contains 1 rider and 50 figures.

Military aeroplane models

1:72 DAKOTA Mk. III

€34.99

Article number: 510101338 Product: 1:72 DAKOTA Mk. III Model Dim.: 27,2 cm SUPER DECALS SHEET - COLOURED INSTRUCTION SHEET Decals for 4 versions The twin-engine Douglas DC-3 was definitely one of the most famous transport aircraft of aviation history thanks to its reliability, flexibility and service life. During the Second World War it was developed a version dedicated to military duties: the Douglas C-47 Skytrain. Produced in large numbers by American production plants, was used extensively by the Allies on all fronts. In particular, the C-47s received by British Royal Air Force and Commonwealth Air Forces took the name "Dakota" and they were used for logistic, tactical transports, launch of paratroopers and medical evacuation. Thanks to its two Pratt & Whitney 1,200 HP engines the "Dakota" was able to reach a top speed of 360 Km/h. It had a pay-load of 2,500 Kg or a capacity of 28 troops.

Model tanks

1:72 DUKW

€15.99

Article number: 510007022 Product: 1:72 DUKW Amphibious truck The model DUKW in 1/72 scale has a length of about 117 mm. Decals for one version. To meet the logistical needs of the US Army landing forces in transferring loads quickly and efficiently from ships to beaches, the American General Motor CCKW-353 2½ t 6x6 amphibious version tactical transport truck was designed and built for this purpose. The basic vehicle components were the same as the GMC road truck with its 4,400 cm3 6-cylinder engine, three differentials and six driving wheels. The DUKW was characterized by a welded hull to make it amphibious, which was then reinforced by horizontal ribs. Its key attribute however was its extraordinary versatility and load capacity. It could carry a 2,400 kg payload or 25 fully equipped troops. DUKWs were deployed extensively in all theaters of war by the U.S. Army, U.S. Marines and the armed forces of numerous Allied countries. Notably, they featured in many significant WW11 beach landings including the D-Day Normandy landings at Utah and Omaha and also at Salerno, Anzio and on the beaches of the Pacific campaign. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 EF-111 A Raven

€31.99

Article number: 510001235 Product: 1:72 EF-111 A Raven The General Dynamics EF-111 Raven was developed on the aerodynamic platform of the ground-attack aircraft F-111 Aardvark. The supersonic aircraft, featuring variable-geometry wings, was identified as a suitable platform to accommodate the electronic components necessary to effectively perform the new assigned tasks. The EF-111 Raven thus became a benchmark for Electronic Warfare missions, being employed in various operational activities in Libya, Bosnia, and Iraq. Easily recognizable by the prominent protrusion on the rear fin, it was equipped with state-of-the-art electronics for its time, including terrain-mapping radar and the adoption of radar jamming systems and electronic countermeasures. The cockpit was also redesigned with the installation of a control suite specifically configured for the Electronic Warfare Officer (EWO), the officer specializing in electronic warfare.   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 F-117A STEALTH NIGHTHAWK

€14.99

Article number: 510000189 Product: 1:72 F-117A STEALTH NIGHTHAWK Model Dim.: 28 cm Decal for one version The Lockheed F-117A Nighthawk is the result of a long and very secret development program dating back to the early 1970s. Numerous attempts and tests were conducted to see if an aircraft could be designed to hide from radar observation. The Lockheed U-2 had radar absorging paint.

Military aeroplane models

1:72 F-14A Tomcat Recessed Line Panels

€32.99

Article number: 510001414 Product: 1:72 F-14A Tomcat Recessed Line Panels Model Dim.: 26,5 cm From ESCI moulds SUPER DECALS SHEET The American supersonic twin-engine Grumman F-14 Tomcat was the icon of the U.S. Navy fighter squadrons during the ‘80s and ‘90s. it was characterized by the adoption of the variable-sweep wing, the twin-tail and the tandem two-seat cabin. The "Tomcat" provided an impressive operational performance. Thanks to its two General Electric Afterburning turbofans it was able to reach the max speed of Mach 2.34. It was armed with a 20 mm M61 Vulcan rotating gun and it could use, in addition to the more conventional AIM-9 Sidewinder and AIM-7 Sparrow, the AIM-54 Phoenix radar-guided long-range missiles. The F-14 entered in service during the ‘70s, replacing the F-4 Phantom II to perform air superiority duties. During its operational career it participated in a lot of military operations from the Gulf of Sirte crisis to the Iraq War. Detailed Plastic Kit

Military aeroplane models

1:72 F-15C Eagle

€22.99

Article number: 510001415 Product: 1:72 F-15C Eagle Model Dim.: 27,0 cm SUPER DECALS SHEET FOR 4 VERSIONS - COLOR INSTRUCTION SHEET The Mc Donnel Douglas F-15 is an all-weather single seat American fighter, developed with the specific goal to gain and maintain air superiority. The F-15 Eagle has been designed during the ‘70s to provide to U.S. Air Force a modern and extremely high performance advanced fighter. The F-15C is representing the more modern version and it is nowadays largely used by U.S. Air Force, U.S. National Guard, and by the Air Forces of several Countries as Japan, Israel, and Saudi Arabia. The F-15 took part to the Gulf War in 1991 and it was able to guarantee the air superiority to Coalition Forces. It has been the most effective fighters with an impressive high number of enemy planes shot down. Armed with a 20mm. M61 gun it can use a wide variety of air-to-air missiles. Thanks to the two powerful Pratt & Whitney F-100 after-burring turbofans engines, the "Eagle" is able to reach the maximum speed of Mach 2.5. Detailed Plastic Kit of model F-15C Eagle in scale 1:72

Military aeroplane models

1:72 F-16 C/D Night Falcon

€16.99

Article number: 510000188 Product: 1/72 F-16 C/D Night Falcon Model Dim.: 21 cm Decals for 3 versions This multi-role fighter is produced in the United States and in a European multination programme which includes about 500 planes for Denmark, Norway Holland and Belgium. Egypt, Greece, Israel, Turkey, South Korea, Singapore and several other countries are using this best-selling fighter plane. Our version features a special Nightversion.

Military aeroplane models

1:72 F-22 Raptor

€19.99

Article number: 510001207 Product: 1:72 F-22 Raptor Model Dim.: 24 cm Decal for one version. The F-22 Raptor represents the new air superiority fighter presently under construction for the U.S. Air Force. It will eventually substitute the F-15 Eagles which have been in service since the late seventies. The Raptor design uses the most recent engine technologies to reach super-sonic speed without afterburners. Furthermore it will be equipped with highly sophisticated electronic equipment for its weapons control. The weapons are carried inside the fuselage to avoid radar detection and to improve the planes aerodynamic features.   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 F-22 Raptor

€34.99

Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 F-35A (Beast Mode)

€34.99

Article number: 510001464 Artikelbezeichnung: 1:72 F-35A (Beast Mode) The JSF (Joint Strike Fighter) program was established to develop a new fifth-generation all-weather multirole combat aircraft able to replace the United States and NATO strike-fighters. The aerospace industry team led by Lockheed Martin created the single-seat, single-engine, F-35 Lightning II. It utilises stealth technology and is characterized by its trapezoidal wings plus the incorporation of the most advanced hi-tech materials and avionic systems. Designed in several different configurations, its role is to provide air superiority, close air support and engage in ground attack missions. The F-35A is the conventional takeoff and landing variant, the F-35B is the short takeoff and vertical landing variant and the F-35C, with foldable-wings, has been developed to be used from deck carriers. Due to its operational flexibility, the advanced on-board technology and the impressive project innovation, the fighter has been favourably received and deployed by many countries’ air forces. Detailed plastic kit

Military aeroplane models

1:72 F-35A Lightning II

€28.99

Article number: 510001409 Product: 1:72 F-35A Lightning II COLOR INSTRUCTION SHEET - SUPER DECALS SHEET FOR 5 VERSIONS Model Dim.: 21,4 cm The JSF Joint Strike Fighter program was set up to develop a new fifth-generation all-weather multirole combat aircraft able to replace the existing United States and NATO strike-fighters. The aerospace industry team led by Lockheed Martin generated the single-seat, single-engine, F-35 Lightning II. It adopts stealth technology and it is characterized by the trapezoidal wings and by the use of the most advanced hi-tech materials and avionic systems. Developed to perform air superiority, close air support and ground attack missions, it has been design in different configurations. The F-35A is the conventional takeoff and landing variant, the F-35B is the short takeoff and vertical landing variant and the F-35C, with foldable-wings, has been developed to be used from conventional deck carriers. Thanks to its operational flexibility, the advanced on-board technology and the impressive project innovation, the F-35 lightning II will be a reference aircraft in the twenty-first century military aviation. Detailed Plastic Kit of model F-35A Lightning II in scale 1:72

Military aeroplane models

1:72 F-35B Lightning II V/STOL Vers.

€34.99

Article number: 510001425 Product: 1:72 F-35B Lightning II V/STOL Vers. Model Dim.: 21,7 cm 100% NEW MOULDS - SUPER DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET - U.S. VERSION ''Beast mode'' EXTERNAL ARMAMENT SET INCLUDED The JSF Joint Strike Fighter program was a developmental project to create a new 5th generation all-weather multirole combat aircraft to replace the existing American and NATO strike-fighter force. The aerospace industry team led by aircraft manufacturer Lockheed Martin, created the single-seat, single-engine F-35 Lightning II. This fighter employs stealth technology and is characterized by its trapezoidal wings and application of the most advanced hi-tech systems, materials and avionics. Designed to attain air superiority, provide close air support and undertake ground attack missions, it has been developed in differing configurations for its varying roles. The F-35B with its STOVL (Short Take Off and Vertical Landing) capability has been specifically designed to operate from modern aircraft carriers such as the British H.M.S. Queen Elizabeth or the Cavour, the flagship of the Italian Navy. The U.S Marines Corps plan to deploy the F-35B in both attack and ground support roles. The STOVL version is powered by the Pratt & Whitney afterburning turbofan and its swivel nozzle, which directs the thrust of the engine. Due in part to its operational flexibility, its advanced on-board technology, innovative design and performance features, the F-35 Lightning II is already a landmark aircraft in the world of 21st century military aviation. Detailed Plastic Kit

Military aeroplane models

1:72 F-35C Lightning II

€41.99

Article number: 510001469 Product: 1:72 F-35C Lightning II The JSF (Joint Strike Fighter) program was established to develop a new fifth-generation, all-weather, multi-role fighter capable of serving as a viable replacement for ground attack aircraft of the United States and NATO countries. From this project emerged the single-seat Lockheed Martin F-35 Lightning II aircraft. Equipped with extraordinary technology, it is characterized by the adoption of an aerodynamic layout, featuring stealth capabilities and a trapezoidal wing design. Designed to perform missions of air superiority, close air support, and ground attack, its airframe can be configured in various setups. The F-35A operates from conventional runways, the F-35B is designed for vertical take-off and landing, and the F-35C is ideal for deployment from conventional aircraft carriers. More specifically, the F-35C is distinguished by its folding wingtips to optimize onboard storage operations, a rear arrestor hook, and a reinforced frontal gear suitable for catapult launch systems on U.S. Navy aircraft carriers. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 F-8E Crusader

€24.99

Article number: 510001456 Product: 1:72 F-8E Crusader The Vought F-8 Crusader was the first carrier-based fighter designed in the 1950s that attained supersonic flight capability. Due to its Pratt & Whitney turbojet engine with afterburner, it was able to exceed the then maximum speed of Mach 1.8. It entered service in the late 1950s with the U.S. Navy and U.S. Marine Corps fighter squadrons to replace the obsolete Vought F7U Cutlass. The F-8E had good operational longevity and was deployed routinely by the US until the Vietnam War. Armed with four 20mm guns installed on the sides of the large front air intake, it could carry a varied weapons load. This capability provided it with a high degree of operational flexibility on missions, utilising air-to-air missiles, rockets and bombs. Because it was armed with cannons, unlike the more modern and advanced early versions of the missile laden F-4 Phantom II, pilots nicknamed the Crusader “The last of the Gunfighters”. The aircraft was also used by the French Navy’s carrier-based fighter squadron. Detailed plastic kit in scale 1:24

Military figures & accessories

1:72 Fig. NATO Troops

€10.99

Military figures & accessories

1:72 Fig.-Set Ger. Infantry (Winter)

€12.49

Article number: 510006151 Product: 1:72 Figuren-Set Deutsche Infanterie (Winter) 100% NEW MOULDS 36 Unpainted figures 100% new Moulds

Model tanks

1:72 FLAK 37 AA Gun, 8.8cm (1 fast ass.)

€16.99

Article number: 510007512 Product: 1/72 FLAK 37 AA Gun, 8.8cm (1 fast ass.) Model Dim.: 8,6 cm THE BOX CONTAINS 1 FAST ASSEMBLY MODEL + 8 FIGURES

Model figures

1:72 French Artillery Set

€16.99

Article number: 510006031 Product: 1:72 French Artillery Set THE BOX INCLUDES 11 FIGURES, 8 HORSES, GUNS and ACCESSORIES.

Model figures

1:72 French Heavy Cavalry

€10.99

Article number: 10006003 Product: 1/72 French Heavy Cavalry Together with the cuirassiers, Carabiners formed the heavy cavalry of Napoleon's army. The above average height and shining cuirasses of these soldiers were often decisive factors on the battlefield. It is worth remembering how they were used as Murat's cavalry reserve at Borodino, or in Marshal Ney's charge at Waterloo. Content 17 horsemen.

Military figures & accessories

1:72 French Infantry (WW II)

€10.99

Article number: 510006189 Product 1:72 French Infantry (WW II) The French Army was quickly defeated by the German armies in 1940. However, several units managed to escape capture and repaired in the United Kingdom. Under the leadership of General De Gaulle the Free French Forces were quickly established to help Allies in the war against the Third Reich. In 1944, both on the Italian front and on that of Normandy in the aftermath of D-Day, these forces were able to return to action against the german forces and contribute until the final victory against Germany. Detailed Plastic Kit

Model figures

1:72 French Line Infantry (1815)

€10.99

Article number: 510006002 Product: 1:72 French Line Infantry (1815) The line infantry was the backbone of Napoleon's Grande Armée. The "shako" headgear adopted in 1806, replacing bicorn hats, and the Charleville 1777 musket, are the most characteristic elements of French line infantry. The equipment was completed by the briquet, a sort of infantry shortsword. The kit also includes the regiment's drummer and the "eagle-bearer" carrying the regiment's insignia.

Model figures

1:72 French Line/Guard Artillery

€10.99

Article number: 510006018 Product: 1:72 French Line/Guard Artillery Trained as an artillerist in his youth, Napoleon paid special attention to the role of this combat arm on the battlefield. The gunners, serving guns built in accordance with the Gribeuval system, wear horse artillery uniforms with a characteristic skin cap. The uniforms of the artillery drivers are remarkable, too. Content 11 figures 8 horses 1 waggon 2 cannons

Model figures

1:72 French Warriors (100 Years War)

€10.99

Article number: 510006026 Product: 1/72 French Warriors (100 Years War) THE BOX CONTAINS 20 FIGURES + 8 KNIGHTS with HORSES.

Military aeroplane models

1:72 FW 190 D-9

€15.99

Article number: 510001312 Product: 1:72 FW 190 D-9 The Focke-Wulf Fw 190 was one of the best aircraft produced during World War II. Manufactured in more than 20,000 units starting from 1941, it was, alongside the Messerschmitt Bf 109, the most renowned fighter aircraft of the Luftwaffe. In its early versions, such as the Focke-Wulf Fw 190 A-8, the fighter was equipped with a BMW 801 D-2 double-row radial engine with 14 cylinders, delivering 1,700 horsepower, enabling it to reach a top speed of 653 km/h. Over time, designers capitalized on the successful aerodynamic structure of the aircraft, achieving what can be considered its ultimate evolution. The adoption of the powerful liquid-cooled Junkers Jumo 213 12-cylinder engine necessitated a revision of the aircraft's design, resulting in an elongated nose. The D version was aptly nicknamed by Luftwaffe pilots as "Langnasen-Dora" (Long-nose Dora), but once in flight, they immediately appreciated its characteristics and capabilities. The FW-190D was indeed capable of competing on equal terms with the most modern Allied fighters, such as the renowned P-51D Mustang.   Warning! Not suitable for children under 14 years.

Model figures

1:72 Gauls Warriors Ist-cent.

€10.99

Article number: 510006022 Product: 1:72 Gauls Warriors Ist-cent. The Romans dubbed "Gauls" those Celtic tribes, often fighting against each other, living in the areas corresponding to modern France, Switzerland, Belgium and Holland. The Gallic tribes found occasional political unity only under the pressure of the Roman menace during Julius Caesar's military campaign. The Gauls recognized Vercingetorix as their political and military leader. He was defeated by Caesar in the battle of Alesia (52 B.C.). The Gaul warriors were characterized by their longswords and decorated shields. Many of them fought naked. Contains 40 figures.

Military aeroplane models

1:72 Ger. BF-110 C-3/C-4 Zerstörer

€21.99

Article number: 510000049 Product: 1:72 Ger. BF-110 C-3/C-4 Zerstörer Alongside the Messerschmitt Bf 109 fighter and the Junkers Ju-87 Stuka dive bomber, the Messerschmitt Bf 110 Zerstörer is considered one of the symbols of the Luftwaffe during the Second World War. The Messerschmitt's heavy multi-role twin-engine fighter was extensively employed by the German air force during the war and, in its various versions, used to fulfill several operational roles: interceptor, fighter-bomber, reconnaissance, anti-ship aircraft, and night fighter. Its two Daimler-Benz DB 601 engines, capable of delivering 1200 hp, allowed the heavy fighter to reach a maximum speed of 560 km/h. Versions C and D were widely deployed on all fronts from the early stages of the war. Heavily armed with two 20mm cannons, four 7.92mm machine guns, and a rear machine gun for self-defense, it could carry bombs or additional fuel tanks under the wings to increase its operational range.   Warning! Not suitable for children under 14 years.

Model tanks

1:72 Ger. Panzerkampfwagen 35 (t)

€16.99

Article number: 510007084 Product: 1:72 Ger. Panzerkampfwagen 35 (t) Model Dim.: 6,8 cm DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET CONTAINS 1 FIGURE The Czechoslovakian LT vz.35 light tank was designed and manufactured during the 1930s. Armed with two machine guns and a 37mm gun it was, for the period, a reliable and effective tank.It was also fast acrossall types of terrain and had a high degree of self-sufficiency. It was designated with the new name Panzerkampfwagen 35 (t), where the letter "t" indicated Czechoslovakian production. The German Wehrmacht used a large number of Panzerkampfwagen in the Panzerwaffe. It actively participated in both the Polish and French campaigns and in the early stages of "Operation Barbarossa".However, from 1941 onwards the light tank become obsolete, and was subsequently used in support or recon roles, or indeed sold to Axis allies such as Bulgaria and Romania. Detailed Plastic Kit

Model tanks

1:72 German Guns Set: PAK35-PAK40-FLAK38

€12.99

Article number: 510007026 Product: 1/72 German Guns Set: PAK35-PAK40-FLAK38 The model kit German Guns Set PAK 35-PAK40-FLAK 38 in 1/72 scale contains 3 models. Including 8 figures.

Military aeroplane models

1:72 Harrier GR.3 Falklands War

€19.99

Article number: 510001401 Product: 1:72 Harrier GR.3 Falklands War Model Dim.: 15,3 cm FALKLANDS WAR SUPER DECALS SHEET FOR 6 VERSIONS The Harrier is probably the most famous aircraft with vertical/short takeoff and landing capabilities of military History. Designed and developed by the British manufacturer Hawker Siddeley in the sixties, it actively participated to the military operations during the Falklands / Malvinas War in 1982. More in detail the Harrier Gr. 3, characterized by the adoption of new features as the nosemounted laser tracker and the integrated electronic countermeasure systems, it was very effective in close support and ground attack missions performed by British Royal Air Force. Armed with two 30 mm guns installed under the fuselage, it was able to carry a significant load of offensive weapons composed by rockets, conventional bombs and laser-guided bombs. Thanks to the possibility to adopt two drop tanks under the wings, the operative range could be increased. Detailed Plastic Kit of model Harrier GR.3 Falklands War in scale 1:72

Military aeroplane models

1:72 Heinkel HE-111H-6

€34.99

Article number: 510001436 Product: 1:72 Heinkel HE-111H-6 Model Dim.: 22,7 cm SUPER DECALS FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET The medium bomber Heinkel He-111 formed the backbone of the Luftwaffe bomber squadrons during the early stages of the Second World War. It was characterized by the adoption of two engines, like many other aircraft with similar features of the time, but also by the introduction of innovative solutions such as the all-metal frames. Thanks to its two Jumo 211 engines, it was able to reach the maximum speed of 440 km / h and it could load up to 2,000 kg of bombs in the internal loading bay. Easy to identify due to the distinctive fully glazed nose, the wing and rudders profiles, the He-111 was widely used by Luftwaffe during the Battle of Britain in 1940. During the years it was constantly improved and upgraded but became obsolete during the latter part of the war. Detailed plastic kit in scale 1:72

Model figures

1:72 Imperial Guard Artillery

€10.99

Article number: 510006135 Product: 1:72 Imperial Guard Artillery Napoleon's Imperial Guard comprised all the assets of the Grande Armée. Foot Grenadiers, Chasseurs-a-Cheval, the Empress' Dragoons, all fought alongside Guard foot and horse artillery. This kit represents a unit of Regiment d’Artillerie a Pied de la Garde Imperiale. Its members were recognizable by the high bearskin bonnet issued in 1810. The typical Guard artillery crew comprised eight men.

Military figures & accessories

1:72 IT Modern US Soldiers

€10.99

Article number: 510006168 Product: 1/72 Modern US Soldiers Little great men Men in their uniformst hat made the history oft he 20th century. From North Africa, to Russia, Normandy, the Pacific Ocean, the variety of the characters presented allows us to recreate the most renowned conflicts of the Second World War. Unusual and dynamic poses make them an ideal complement for wargames and dioramas. Contains: 50 unpainted figures

Military figures & accessories

1:72 Italian Cannone 149/40 w/crew

€10.99

WWII: Italian Cannone da 149/40 w/crew

Military aeroplane models

1:72 Italian Flying boat CANT Z 501

€30.99

The CANT Z.501 "Gabbiano" was a central-hull seaplane designed for maritime reconnaissance, developed by engineer Filippo Zappata for the Cantieri Riuniti dell'Adriatico (C.R.D.A.) in the 1930s. The aircraft's design featured a large high wing and lateral floats, making it suitable for patrol, search, and rescue operations at sea. It was powered by a 900 HP Isotta Fraschini Asso XI engine, providing good range and a maximum speed of 275 km/h. The CANT Z.501 began its operational service during the Spanish Civil War but was extensively used by the Regia Aeronautica during World War II in the Mediterranean theater. It was armed with three 7.7 mm Breda-SAFAT machine guns for defense against air attacks and could carry a limited offensive payload. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 Jaguar T.2 R.A.F. Trainer

€22.49

Article number: 510001470 Product: 1:72 Jaguar T.2 R.A.F. Trainer The Jaguar ground attack aircraft emerged in the 1960s from a collaborative project between the French and British aviation industries and was operated by the Royal Air Force until the late mid-2000s, thereby demonstrating extraordinary longevity and operational efficiency. Its two turbojet engines were able to attain and also exceed Mach 1.6. It has been deployed on numerous and quite often highly complex missions in operational theatres, including the Balkans and Iraq. The T2 two-seat trainer version was developed for operational conversion of British RAF pilots. It was also capable in its secondary role of ground attack and close support missions but unlike the single-seat version, it was armed with a single 30mm Aden cannon. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 Ju-52/3m

€34.99

Article number: 510000102 Product: 1:72 Ju-52/3m The Junkers Ju-52/3m was produced by the renowned German aviation company from the early 1930s for civilian use with Lufthansa and other major commercial airlines. It was characterized by its three-engine configuration and distinctive corrugated metal fuselage panels. A robust and reliable aircraft, it was quickly adopted for military purposes by the Luftwaffe, primarily as a transport aircraft. The Ju-52, affectionately nicknamed "Tante Ju" (Auntie Ju), was used on all operational fronts throughout the duration of the war and served as the backbone of German military logistics in supplying ground troops. It was also employed for airborne troop missions, notably for paratrooper drops in the Netherlands in 1940 and in Crete in 1941. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 JU-87 B2 STUKA

€15.99

Article number: 510001292 Product: 1:72 JU-87 B2 STUKA Model Dim.: 15,4 cm Decals for 4 versions. The JU-87 Stuka was the standard ground attack plane and dive bomber of the German Air Force at the beginning of WWII. In spite of its mediocre characteristics it achieved considerable fame through the psychological impact it had on the population and on the enemy forces. Never before has such massive employment of aircraft been experienced. The success of the Stukas during the first phase of the war was due to total air supremacy guaranteed by the Luftwaffe fighters which permitted the Stukas to operate without being disturbed by enemy aircraft. During the battle of Britain the myth of the JU-87 was re-dimensioned due to the supremacy of British fighter aircraft. Nevertheless the Stukas operated until the end of the war from the African theater to Russia.

Military aeroplane models

1:72 Ju-87G-2 Kanonenvogel

€15.99

The JU-87 dive bomber is certainly one of the best known aircraft of WW2. The characteristic "gull wing" aircraft gained great notoriety at the beginning of the war, and is considered, together with the Panzer Divisions of the Wehrmacht, as defining symbols of the Blitzkrieg. During the war, new versions with differing operational profiles were introduced. The Ju-87G was developed as an "anti-tank" version of the Stuka, to counter the vast array of enemy armored vehicles deployed on the eastern front post 1943.The Stuka "ace" Hans Ulrich Rudel proposed the addition of two 37 mm Flak 18 cannons housed in underwing pods to better counter this developing threat. With this configuration the Ju-87G "Kanonenvogel" proved extremely effective in the hands of experienced pilots. Even more refined was the G-2 version which was characterized by greater wing surfaces, in turn derived from the previous D-5 version. Detailed plastic kit

Military aeroplane models

1:72 Junker Ju-87B Stuka

€30.99

Article number: 510072010 Product: 1:72 Junker Ju-87B Stuka The Junkers Ju 87 Stuka was a two-seat dive-bomber/ground-attack aircraft. The Stuka first flew in 1935 and made its combat debut in 1936 as part of the Condor Legion during the Spanish Civil War . The aircraft was easily recognizable by its inverted gull wings and fixed landing gears. The Stuka's design included several innovative features, including automatic pull-up dive brakes under both wings to ensure that the plane recovered from its attack dive even if the pilot blacked out from the acceleration. It became soon the icon of the German "Blitzkrieg" during the first stages of the Second World War providing the air support to the Wehrmacht Panzer Divisions. It was used by Luftwaffe during the Battle of Britain where it showed its weaknesses compared to the faster and well-armed modern fighters as Hurricane and Spitfire.

Model tanks

1:72 King Tiger

€30.99

Article number: 510072005 Product: 1:72 King Tiger The heavy tank Sd.Kfz 182 Panzer VI Ausf. B "King Tiger" came into service with the German army since mid 1944. Compared to its predecessor, the Tiger I, several differences and improvements have been adopted : a completely new chassis, a stronger armor characterized by the sloped frontal hull (bringing to a total weight of almost 70 tons) and the lethal 8.8 cm KwK 43 L/71 gun as main armament. Thanks to its Mayback V-12 engine the King Tiger was able to reach the maximum speed of 42 Km/h. For the mass production two different turret solutions has been used : the Porsche turret, at the beginning, and the Henschel turret for the most of the units produced. Both ot them were able to load 80 rounds for the main cannon. The first combat use of the King Tiger was by the 503rd Heavy Panzer Battalion during the Battle of Normandy on July 1944.

Model tanks

1:72 M3A1 Half Truck 2 easykit

€17.99

Article number: 510107509 Product: 1:72 M3A1 Half Track Model Dim.: 8,3 cm CONTAINS 2 MODELS

Model tanks

1:72 M4 Sherman

€13.49

Article number: 510007003 Product: 1:72 M4 Sherman Model Dim.: 8,2 cm Decals for one version The Sherman is one of the most famous tanks of World War II, and was also the standard tank of the allied armies. The M4 was fairly well protected with armor but not sufficient enough to confront the 88mm guns of the Germans. It had a valid engine, was reliable and had sufficient range as well as armament.

Military aeroplane models

1:72 ME 410 "HORNISSE"

€19.99

Article number: 510000074 Product: 1:72 ME 410 "HORNISSE" Model Dim.: 17,4 cm Decals for 3 versions The Messerschmitt Me 410 Hornisse was a low-wing twin-engine heavy fighter developed by the famous German aircraft manufacturer as an evolution of the previous Me-210. The heavy fighter was intended to replace the outdated Bf-110s in the Luftwaffe Squadrons. Powered by two 1,750 HP Daimler-Benz DB603 engines, it could be used to carry out several operational roles. Heavily armed with four 20mm Mauser cannons and with two 7.92mm machine guns installed in the front of the aircraft, it also featured two remotely controlled MG 131 machine guns housed in side "barbettes" on the fuselage. The initial versions for tactical support and bombing missions could carry an offensive payload of over 500 kg in the internal bomb bay or underwing pylons. Distribution to Luftwaffe Squadrons was implemented from mid-1943. The Me-410 participated in operational activities on various fronts, from Italy and the Balkans to the Eastern Front.

Military helicopters

1:72 MH-47 E SOA Chinook

€26.99

Article number: 510001218 Product: 1:72 MH-47 E SOA Chinook Model Dim.: 22 cm Decal for one version The medium transport and attack helicopter Chinook, developed for the U.S. Army during the sixties in its most recent versions, is also in service with many other armed forces around the world. This version has been substantially modified and was designed for special missions of the U.S. Armed Forces. It is a long range version with large tanks originally developed for civilian use. The MH-47 is equipped with sophisticated night vision and satellite navigational systems. Furthermore the chopper features efficient defense armament based on various machine guns.

Military helicopters

1:72 MH-53 E Sea Dragon

€26.99

Article number: 510001065 Product: 1/72 MH-53 E Sea Dragon Model Dim.: 32 cm Decals for one version This large mine-sweeping helicopter is in service with various special units of the U.S. Navy and the Japanese self-defense forces.The Sea Dragon is a three-engine version of the twin-engine CH-53 which saw service first during the sixties and was widely used by the Marines and in special rescue versions by the U.S. Air Force. Thanks to the outstanding power of its engines this helicopter has ample capacity to carry the heavy mine-sweeping systems, which are mounted on a special hydrofoil which is dropped int the sea to detect mines.

Military aeroplane models

1:72 MIRAGE 2000C

€16.49

Article number: 510001381 Product: 1/72 MIRAGE 2000C Model Dim.: 19,9 cm Decals for 3 versions The Dassault Mirage 2000C is a single-seat air superiority fighter and it has been a reference point for the French aircraft production. Entered in service in the first part of 80’s, it maintained the typical "delta wing" aerodynamic design but, compared to the previous generation French fighters, the Mirage 2000 has adopted significant technical improvements. Thanks to its SNECMA afterburning turbofan engine, it is able to reach the speed of Mach 2.2. It has a great maneuverability and it can carry a various set of offensive weapons. The Mirage 2000C is often considered the first new generation fighter, produced in Europe, to be entered in operational service. The main user has been the French Armée de l’Air that used the Mirage 2000C during Gulf War on 1991. Detailed Plastic Kit of model MIRAGE 2000C in scale 1:72

Model tanks

1:72 Model-Set M-1 Abrams

€30.99

The 3rd generation American main battle tank the M1 Abrams, is the backbone of the United States Army and United States Marine Corps armored divisions. The Abrams is characterized by its heavy armor (it is one of the heaviest combat vehicles in the world), and also its powerful multifuel turbine engine. The tank first entered service at the beginning of the 1980’s to replace the ageing M-60. It houses a sophisticated computerized fire and control system within its modern armor plated hull. The Abrams offers greater crew protection than many of its predecessors , specifically in the design of the separate and heavily protected ammunition storage area within the main body of the tank. It was initially armed with a 105 mm main gun which is to be up-dated and replaced by a more modern and powerful 120 mm smooth-bore cannon. The Abrams has been extensively and successfully deployed on operational service in several theaters of war, including recent conflicts in the Middle East and Afghanistan. Deatailed plastic kit

Military figures & accessories

1:72 Montecassino'44 GUSTAV Line Battle

€92.99

Article number: 510006198 Product: 1:72 Montecassino'44 GUSTAV Line Battle During the Italian campaign, in the period from January to May 1944, the allied forces under the command of General Mark Clark, advanced upon the German 10th Army commanded by General Heinrich von Vietinghoff, who were entrenched in defensive positions along the Gustav line. The cornerstone of the Gustav line was the small town of Cassino which controlled the river Liri valley. Cassino itself was dominated by the historic Benedictine abbey of Montecassino, which was an important strategic observation and defensive position of the German forces. The determined resistance offered by the German troops, who held their positions for almost four months, was assisted by the difficult weather conditions, which hindered the allied advance. Fierce fighting ensued to try and oust the Germans from their stubbornly held defensive line. It was not until mid-May that the German positions were finally breached, which allowed the allied advance to Rome to ensure its liberation in June 1944. Detailed plastic kit in scale 1:32

Model figures

1:72 Napoleon Imperial General Staff

€10.99

Article number: 510006016 Product: 1:72 Napoleon Imperial General Staff This kit faithfully reproduces the High Command of Napoleon's Grande Armée, the "brain" of the Corps system devised by the Emperor. The kit features the Emperor, the aides-de-camp, Marshal Berthier (Napoleon's Major-General), and also the escort of the inseparable Chasseurs a Cheval of the Imperial Guard and the colorfully dressed Mameluks. Content: 13 riders and 8 figures Detailed Plastic Kit of model Napoleon Imperial General Staff in scale 1:72

Model figures

1:72 Napoleon.Wars - Brit. Infantry 1815

€12.49

Article number: 510106095 Product: 1:72 Napoleon.Wars - Brit. Infantry 1815 The steady "squares" of Wellington's Infantry resisted the countless cavalry charges of Marshal Ney at Waterloo, and dramatically affected the outcome of the most famous battle of the Napoleonic age. The 2nd Regiment Coldstream Guards, one of the most celebrated units, took part in the defense of the Hougoumont farm. They are represented here with their trusty "Brown Bess" flintlock muskets. Contains 48 figures.

Model figures

1:72 Napoleonic Wars - Brit. Artillery

€10.99

Model figures

1:72 Napoleonic Wars - French Infantry

€11.99

Article number: 510006066 Product: 1/72 Napoleonic Wars - French Infantry Line infantry advanced in close order, often preceded by light infantry units like Chasseur, Tirailleurs or Voltigers. These light units harassed the enemy to disrupt their lines, or to interrupt their line of command targeting officers, drummers, and standard bearers. Even the Imperial Guard had light infantry units in its ranks. Content 48 figures.

Model figures

1:72 Napoleonic Wars-French Light Caval.

€12.49

Article number: 510106080 Product: 1:72 Napoleonic Wars-French Light Caval. Hussars and Chasseurs a Cheval represented the backbone of the French light cavalry. Here they are represented wearing the uniforms of elite companies, characterized by skin hats, or by the more traditional shakos of line light horsemen. They can be used in the second half of the Empire. Among the most famous cavalry commanders we remember Lasalle, who fell at Wagram, and Colbert. Contains 17 riders.

Military aeroplane models

1:72 NATO Pilots and Ground Crew

€11.49

Article number: 510101246 Product: 1/72 NATO Pilots and Ground Crew Content 48 unpainted figure.

Military figures & accessories

1:72 Pz.Kpfw. V Panther Ausf. A

€15.99

The Panzerkampfwagen V "Panther" is widely recognised as one of the best tanks that was produced during World War 2. It was deployed as a direct response to the Soviet T-34 and KV-1 tanks on the Eastern Front, which were superior to both the Panzer III and Panzer IV in terms of performance and armaments. Powered by a 700 horsepower V-12 Mayback engine, it was armed with the 75 mm KwK 42 high speed gun which was a very effective anti-tank weapon. The Panther was designed with optimal armor protection, including inclined front armor. Its overall mobility, speed and armaments made the Panther one of the leading tanks of the period, and ensured its deployment on all of the main operational fronts, from the East through Italy and France. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Model tanks

1:72 Pz.Kpfw.V Panther

€17.49

Article number: 510107504 Productg: 1:72 Pz.Kpfw.V Panther Model Dim.: 12,7 cm CONTAINS TWO FAST ASSEMBLY MODELS The Panther was one of the most efficient and famous vehicles of WWII. It was created together with the well-known tank mark VI Tiger. This tank entered service in 1943 supporting the Mark IV tanks, which had difficulties to oppose the onslaught of Soviet T-34 tanks on the Eastern front. During the following two years of the war this powerful tank was present in all war zones: Italy, France as well as during the final battles on german soil. It proved its qualities against its adversaries, from Sherman to Stalin. Deatailed plastic kit of model Pz.Kpfw.V Panther in scale 1:72

Model tanks

1:72 Pz.Kpfw.VI Tiger I Ausf.E 2 easykit

€18.99

Article number: 510107505 Product: 1:72 Pz.Kpfw.VI Tiger I Ausf. E Model Dim.: 12 cm CONTAINS TWO FAST ASSEMBLY MODELS - NEW DECALS SHEET Decals for 2 versions The Tiger was certainly the most famous armored vehicle of World War II. Its fire power and protective armor made it the dominating factor on all battle fields during the years 1943-44. It did, however, present considerable problems, due to its complex mechani?cal construction. The Tiger crews were continuosly engaged in maintenance work, which was aggravated through extreme conditions in the African desert and the Russian Plains. CONTAINS TWO FAST ASSEMBLY MODELS.

Model tanks

1:72 PzKpfw. III Ausf. J Fast Ass. Kit

€16.99

Article number: 510107507 Product: 1:72 PzKpfw. III Ausf. J Fast Ass. Kit Model Dim.: 7,7 cm CONTAINS TWO FAST ASSEMBLY MODELS Decals for 2 versions Development of the Panzer III began in the mid-1930s with the aim to make it the backbone of the armoured battalions of the Wehrmacht, alongside a smaller number of heavier tanks (Panzer IV). Initially armed with a 37mm cannon, the Panzer III moved rapidly to a 50mm cannon and, in the upgraded versions (Ausf M and L), to the 75/24 gun with 64 rounds already used on the Panzer IV. Production ceased in August 1943. Deatailed plastic kit of model PzKpfw. III Ausf. J Fast Ass. Kit in scale 1:72

Military aeroplane models

1:72 Reggiane Re.2002 Ariete

€19.99

The Reggiane Re 2002 "Ariete" was developed to provide the Regia Aeronautica with a more modern and effective ground attack aircraft. Based on the airframe of the Reggiane Re 2000 fighter, the aircraft was equipped with a higher-performance engine than its predecessor and featured enhanced armament. In addition to the two machine guns mounted in the nose, two more machine guns were added in the wings, and the aircraft was capable of carrying an offensive bomb load of up to 500 kg. The flight units equipped with the Re 2002 were deployed by the Regia Aeronautica to counter the Allied invasion of Sicily in 1943 and, following Italy's armistice in September of the same year, were also used by the German Luftwaffe. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Model figures

1:72 Roman Infantry 1st Century

€10.99

Article number: 510006047 Product: 1/72 Roman Infantry 1st Century The equipment of the 1st Century B.C. legionnaire became the stereotype of Roman infantry. Over his tunic he wore the heavy lorica segmentata, the most advanced form of body armor at the time. The characteristic rectangular "scutum" often bears the name or the insignia of the Legion the soldier belongs to. The individual armament comprised gladius and pilum, a heavy throwing javelin. The kit also includes centurions with transverse crest helmets, and the signifer (standard bearers) carrying the Legion's insignia. Content 35 figures.

Model figures

1:72 Roman Infantry Ist-IInd cent.

€10.99

Article number: 510006021 Product: 1:72 Roman Infantry Ist-IInd cent. The legion was the basic unit of the Roman army. Each maniple was commanded by a centurion, that could be recognized by his leg guards, the vine-stick and the helmet with a transverse crest. The Legion's equipment after the Marian reform was standardized and issued by the State. Legionnaires of this period wore a lorica hamata, reinforced on the shoulders, and were equipped with semi-rectangular shields. Two throwing pila, the gladius and the pugio (a short dagger) completed their equipment. Content 1 horseman and 34 figures.

Military aeroplane models

1:72 S. 79 Sparviero

€22.99

Article number: 510001290 Product: 1:72 S. 79 Sparviero Model Dim.: 22,5 cm Decals for one version. This elegant 3-engined aircraft was originally developed by the Italian aeronautical industry in the mid-30s to provide fast postal links with African colonies. Versions of record-breaking speed were soon developed. Its high velocity performance brought it to the World’s attention when it was used in a purely military role as a bomber and when, during World War Two, it was extensively used as a torpedo bomber in the Mediterranean: despite poor defensive weaponry and crew protection, its successes against allied shipping were numerous.

Military aeroplane models

1:72 S.M.79 M Sparviero

€29.99

Article number: 510001412 Product: 1:72 S.M.79 M Sparviero The S.M.79 Sparviero was created and manufactured in the 1930s by Italian company SIAI-Marchetti initially as a civilian aircraft, which then went on to achieve significant world speed records during this period. Featuring a typical three-engine low-wing configuration, it had a wood, canvas and metal frame. Subsequently reconfigured into military variants, it was widely used by the Italian Regia Aeronautica during the Second World War, particularly as a bomber in the Mediterranean theatre and then as an effective torpedo bomber. Recognizable by the "hump" behind the cockpit and due to its three 750 HP Alfa Romeo 126 RC34 radial engines, it was capable of reaching a top speed of 430 km/h. In its basic bomber role it was superseded by many other more modern aircraft, however the "Sparviero" for the entire duration of the conflict achieved significant results in the hands of its skilled crews during torpedo maritime operations in which it attacked enemy shipping. Kit, instructions, decor

Model tanks

1:72 Sd. Kfz. 182 King Tiger

€16.49

Article number: 510007004 Product: 1:72 Sd. Kfz. 182 King Tiger Model Dim.: 11,2 cm Decal for one version This vehicle was one of the most powerful battle tanks in service during World War II. The King Tiger was armed with a formidable 88mm cannon, which enabled the tank to engage any allied tank even at long range. Because of its heavy armor, complex suspension systems and a complicated, maintenance-prone engine, the tank was non very reliable.

Model tanks

1:72 Sd. Kfz. 184 Panzerjäger Elefant

€13.99

Article number: 510007012 Product: 1:72 Sd. Kfz. 184 Panzerjäger Elefant Model Dim.: 11,7 cm Decal for one version These vehicles, which mounted a casemate gun, were used extensively by the German Army throughout the Second World War, providing covering fire for infantry and also being used as tank-busters. Several hundred of this particular self-propelled gun - constructed on a Pz.Kpfw. IV tank chassis - were built in several versions that underwent constant armour and gun upgrades to keep pace with the development of enemy weapons.

Model tanks

1:72 Sd.Kfz 142/1 Sturmgesch.III

€16.99

Article number: 510107522 Product: 1/72 Sd.Kfz 142/1 Sturmgeschütz III Model Dim.: 7,6 cm 100% NEW MOULDS SPECIAL WARGAME DECALS These vehicles, which mounted a casemate gun, were used extensively by the German Army throughout the Second World War, providing covering fire for infantry and also being used as tank-busters. Several hundred of this particular self-propelled gun - constructed on a Pz.Kpfw. III tank chassis - were built in several versions that underwent constant armour and gun upgrades to keep pace with the development of enemy weapons.

Model tanks

1:72 Sd.Kfz 265 Kleine Panzerbefehlswag.

€13.49

Article number: 510007072 Product: 1:72 Sd.Kfz 265 Kleiner Panzerbefehlswagen Model Dim.: 5,6 cm The Sd.Kfz 265 Kleine Panzerbefehlswagen armored command vehicle was born to meet the need of the Wehrmacht Panzer Division Commanders to follow, as close as possible, the tanks and better coordinate them on the battlefield. The armored command vehicle was designed on the Panzer I Ausf. B light tank chassis. To increase the space for the unit commander and his staff, the traditional rotating turret with the main armament was removed and a tall fixed superstructure was installed. The commander’s room was able to host the battle maps, the transmission and the communication systems. An additional radio antenna could be used, on the hull, to increase the range of radio communication. Produced from the second half of ‘30s the "Panzerbefehlswagen" has been used in combat operations in September 1939 during the Poland invasion. Detailed Plastic Kit of model Sd.Kfz 265 Kleine Panzerbefehlswagen in scale 1:72

Model tanks

1:72 Sd.Kfz. 251/1 "Stuka Zu Fuss"

€18.99

Article number: 510007080 Product: 1:72 Sd.Kfz. 251/1 "Stuka Zu Fuss" Model Dim.: 8,1 cm The Sd.Kfz.251 half-track was an armored fighting vehicle (AFV), which was deployed by the Wehrmacht on all operational fronts during the Second World War. Powered by a Maybach 6-cylinder petrol engine it was able to reach a speed of 55 km / h even on ‘off road’ terrain. Produced in huge numbers, it was mainly used to transport ‘Panzergrenadiers’, but during the war several versions were developed to meet differing operational requirements. The Wurfrahmen rocket launcher version was built on the Sd.Kfz.251. Equipped with 6 compartments, 3 on each side, intended for the launch of rockets of different sizes, it was nicknamed "Stuka zu Fuss". Although not precise, it could have an important psychological effect on enemy troops and still proved to be a valid support for ground troops especially in urban fighting. Detailed plastic kit

Model tanks

1:72 Sd.Kfz. 251/8 Ambulance

€15.99

Article number: 510007077 Product: 1:72 Sd.Kfz. 251/8 Ambulance Mod.Dim.: 8,1 cm Actros is the commercial name for Mercedes-Benz heavy truck range. The Actros range has been introduced in 1995 and quickly achieved a significant commercial success as a suitable solution to perform long-distance haulage and heavy-duties haulage. The New Actros, introduced on the market in 2012, is the most update and innovative expression of the heavy truck Mercedes family. It is characterized by an advanced and modern design and the adoption of new Euro 5 and Euro 6 engines. The vehicle configuration has been designed and developed to guarantee the highest operational efficiency minimizing the running costs. Detailed Plastic Kit

Model tanks

1:72 SD.Kfz.251/1 Ausf. C Fast Assm. Kit

€16.99

Article number: 510107516 Product: 1:72 SD.Kfz.251/1 Ausf. C Fast Assm. Kit 100% NEW MOULDS Decals for 3 versions THE BOX INCLUDES 2 KITS

Model tanks

1:72 SdKfz.161 PzKpfw. IV F1 Fast As.Kit

€16.99

Article number: 510107514 Product: 1:72 SdKfz.161 PzKpfw. IV F1 Fast As.Kit Model Dim.: 8,2 cm 100% NEW MOULDS THE BOX INCLUDES 2 KITS Decals for 2 versions

Model tanks

1:72 Semovente M40 da 75/18, 2 pcs

€16.99

Article number: 510107519 Product: 1:72 Semovente M40 da 75/18, 2 pcs Model Dim.: 7 cm Decals for one version The "Semovente" 75/18 M40, developed by Fiat Ansaldo, was employed by Regio Esercito from the end of 1941 in North Africa and was used up to the end of World War II. Although it was developed on the tank M13/40 old frame, was the only Italian armored vehicle, produced in large numbers, to pose a serious threat to Allied tanks. Its 75mm gun had a good fire power and was effective even with the most modern and heavily armored enemy tanks like the Sherman. The good and effective gun was not able to compensate several weaknesses such as a too light armor and a unreliable and weak engine directly derived from the tank M13/40. The Italian Semovente was used, in particular, by Ariete and Littorio Armoured Division in North Africa but also, up to the end of war, by Repubblica Sociale in the North of Italy.

Military aeroplane models

1:72 Spitfire MK.IX

€30.99

Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military aeroplane models

1:72 SR-71 Blackbird

€34.99

Article number: 510000145 Product: 1/72 SR-71 Blackbird Model Dim.: 45 cm Decals for one version THE BOX CONTAINS LOCKHEED D-21 DRONE The SR-71, with its impressive and unorthodox appearance, is the younger sister of the U-2 with the Important difference that it is built to perform its duties at MACH 3.5. U.S. STRATEGIC AIR COMMAND has stated that the BLACKBIRD is still holding the world's speed record. It can cross the United States in less than an.hour. The SR-71s have been used in all the countries of the world, flying over Cuba, China, Vietnam, Middle East etc in times of international tension or of local conflicts, even operating in Okinawa, Thailand and the Philippines. It is today's most sophisticated spy aircraft.

Model figures

1:72 Templar Knights - Medieval Era

€11.99

Article number: 510006125 Product: 1:72 Templar Knights - Medieval Era The birth of the Knights Templar, a monastic and military order, dates back to 1139 as an attempt to protect the pilgrims visiting the Holy Land after its conquest. The knights were characterized by a Cistercian's white robe with a red cross. Most templars were equipped as heavy cavalry and can be considered a kind of elite troop of their times.

Model figures

1:72 Teutonic Knights XIIth-XIIIth cent.

€10.99

Article number: 510006019 Product: 1:72 Teutonic Knights XIIth-XIIIth cent. This military and monastic order appeared in the Holy Land at the times of the third crusade but it focused its activity in the colonization of Eastern Prussia, Poland and Baltic countries, bringing Catholicism in the East. In 1199 Pope Innocent 3rd gave them the white surcoats with a black cross that became the insignia of the order. In 1242, the knights of the Order were defeated in the battle of Lake Peipus by Alexander Nevsky, prince of Novgorod. Content 17 riders

Model figures

1:72 The Knights XIth Century Crusaders

€10.99

Article number: 510006009 Product: 1/72 The Knights XIth Century Crusaders The first Crusade took place at the end of 11th Century and culminated with the siege and conquest of Jerusalem in 1099 by Godfrey of Bouillon, that led to the birth of the Outremer crusader states. The kit represents the diversity of troops that took part in the war. The knights, heavy cavalry wearing chain mail armor and carrying the large almond-shaped shields typical of the age, fought alongside infantry and crossbowmen recruited in various Christian European countries. Content 9 horsemen and 25 figures.

Military aeroplane models

1:72 Tornado GR. 1 RAG

€18.99

Article number: 510101384 Product: 1:72 Tornado GR. 1 RAG Model Dim.: 23,2 cm Decals for 4 versions The multirole Tornado is a twin-engine combat aircraft with a variable-sweep wing. This kind of aircraft is the result of a joint development project carried out by British, German and Italian companies. Although during its lifetime it has been used for several purposes (ground attack, electronic combat/reconnaissance, interceptor), its main role has always been to perform low-altitude penetrating strike missions. Tornado can load and use a powerful and varied set of offensive weapons. The Tornado baptism of fire took place in 1991 during the Gulf War. The British Royal Air Force Tornado Gr. 1s, deployed on Bahrain and Saudi Arabia air bases, were crucial during "Operation Granby". Detailed Plastic Kit of model Tornado GR. 1 RAG in scale 1:72

Military aeroplane models

1:72 Tu-22M2 Backfire B

€62.99

Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military helicopters

1:72 UH-1D Slick

€15.99

Article number: 510101247 Product: 1:72 UH-1D Slick Model Dim.: 14 cm This robust helicopter was first introduced during the mid-fifties and may be the best known rotor-blade aircraft world-wide. Reliability is its greatest feature. It was designed for the U.S. Army during the Vietnam war. Thousands of UH-1s are in service as transport, ambulance and attack aircraft. Licensed production in Italy, Germany and Japan make it part of the armed and police forces of more than fifty nations. Presently twin-engine versions are being produced.

Model figures

1:72 Union Artillery

€10.99

Article number: 510006038 Product: 1:72 Union Artillerie In the summer of 1863, the Confederate army led by Lee played for keeps by sending a large contingent to the North, up to Pennsylvania. It clashed with the Union army at Gettysburg, where the biggest battle ever to be fought on American soil took place. After three days of desperate struggle, the Confederates had to admit their defeat. At Gettysburg, the Potomac army Union artillery contributed to contain the Confederate advance, affecting the outcome of the battle. Contains: 3 riders 10 figures 8 horses 1 covered wagon cannon

Model figures

1:72 Union Cavalry 1863 The blue jackets

€10.99

Article number: 510006013 Product: 1:72 Union Cavalry 1863 The blue jackets The battle of Appomattox Courthouse, during the American Civil War, was the final effort of General Robert E. Lee's Confederate army of North Virginia before his surrender to General Ulysses S. Grant, commander-in-chief of the Union army. General Sheridan's Union cavalry played a decisive role. The soldiers in this kit are represented with the typical cavalry short jacket without epaulettes, the Mc Clellan or chasseur hat, and the typical Sharps & Smith carbines. Contains: 15 riders 2 figures 2 horses

Model figures

1:72 Union Infantry (Amer. Civil War)

€10.99

Article number: 510006177 Product: 1/72 Union Infantry (Amer. Civil War) THE BOX INCLUDES 50 FIGURES. The Union infantry has held, during the Civil War period, the weight of the most famous battles (Bull Run, Antietam, Gettysburg) suffering a very high number of losses. The uniform was characterized by the typical blue jacket. The officers often wore a tailor-made longer coat (redingote). Detailed Plastic Kit of model Union Infantry (Amer. Civil War) in scale 1:72

Model figures

1:72 Union Infantry and Zuaves

€10.99

Article number: 510006012 Product: 1/72 Union Infantry and Zouaves The Union infantry has held, during the Civil War period, the weight of the most famous battles (Bull Run, Antietam, Gettysburg) suffering a very high number of losses. The uniform was characterized by the typical blue jacket. The officers often wore a tailor-made longer coat (redingote). Many infantry units adopted uniforms similar to those of the French Zouaves, who became famous during the campaigns in Crimea and Italy, with dark blue tunics decorated in red, white spats and the typical large red trousers. The uniform was completed with the red fez with tassel. Contents 50 figures.

Military aeroplane models

1:72 US F-5A Freedom Fighter

€22.99

Article number: 510001441 Product: 1:72 US F-5A Freedom Fighter During the 1950s, the American Aircraft Company Northrop began developmental work into a simple and "low cost" fighter that would meet the needs of several NATO member air forces. The F-5 met the precise specification, it being a light single-seat fighter, small in size but extremely maneuverable and effective. It was relatively simple and cheap to produce and was operationally efficient. The initial version produced by Northrop, designated F-5 A "Freedom Fighter", was fitted with two General Electric J85-GE-13 engines and could attain a maximum speed of 1,700 Km / h. Armed with two 20 mm. guns installed in the nose, the F-5 was a credible "multi-role" aircraft due to its weapons load capability, which could offer a wide range of offensive options for both air defense and ground attack missions. This multi-role aspect of the aircraft ensured its rapid take-up by many Air Forces. Detailed plastic kit in scale 1:72

Model tanks

1:72 US M3A1 Spähpanzer

€13.49

Article number: 510007063 Product: 1:72 US M3A1 Spähpanzer The White Motor Company began its study and development of the M3 in 1938 to supply the United States Army with an armored reconnaissance vehicle. Equipped with a 6 cylinder 110 Hp Hercules JXD petrol fueled engine, it could reach a maximum speed of 81 Km/h. Equipped with four-wheel drive, it was used for patrol, reconnaissance and command post. The vehicle could carry up to 8 men and was armed with a 12.7 mm Browning M2 machine gun plus two more Browning 7.7 mm machine guns on the sides. It was first used in the Philippines campaign in 1941. Used in North Africa and in Sicily, it was replaced during the war, for advanced exploration tasks, by the more modern M8 Greyhound. Besides being used by the American Army, it was used as well by the Armed Forces of England, France and by some divisions of the Red Army who used it on the Eastern front to pull 76 mm ZIS-3 cannons.

Model tanks

1:72 US M7 Priest 105mm/Kang. Fa.Ass.Kit

€16.99

Article number: 510107513 Product: 1:72 US M7 Priest 105mm/Kang. Fa.Ass.Kit Model Dim.: 8,3 cm Decals for 5 versions CONTAINS 2 FAT ASSEMBLY MODELS

Military aeroplane models

1:72 US P-38J Lightning

€28.99

Article number: 510001446 Product: 1:72 US P-38J Lightning Model Dim.: 16,0 cm SUPER DECALS SHEET FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET FIGURE NOT INCLUDED The Lockheed P-38 Lightning was certainly one of the foremost aircraft of WW2 in terms of aerodynamic structure and design. It was a revolutionary heavy fighter with a twin-boom fuselage where the two engines were installed. The pilot was accommodated in a leading-edge cockpit at the centre of the aircraft. The P-38 could reach a top speed of over 660 km/h thanks to its two 12 cylinders liquid cooled V-1710 Allison engines, each capable of 1,425hp. It was armed with four Browning 12.7 mm machine guns and one Hispano M2 cannon which ensured highly effective firepower. The P38 was not particularly manoeuvrable compared to other single-engine fighters of the period, but it was very robust and stable. Its huge versatility made it a key aircraft both on operations in the Pacific theatre and on escort missions for long-range bombers over Europe. The P-38 with its characteristic shape and its ‘fear effect’ was nicknamed ‘the fork-tailed devil’ by enemy pilots. Detailed plastic kit in scale 1:72

Military aeroplane models

1:72 US P-51A Mustang

€16.99

Article number: 510001423 Product: 1:72 US P-51A Mustang The North American P-51 Mustang is considered one of the most iconic aircraft in history, and widely credited as perhaps the best single-seat piston engine fighter of World War II. Among the earlier production versions, the P-51A was seeing action as early as 1942. Its new Allison V-1710 engine was very powerful and capable of attaining a maximum speed of 650 km / h. It was armed with four wing-fitted 12.7 mm Browning machine guns, which provided considerable firepower. The aircraft’s operational capabilities would be further enhanced by the fitting of two additional under-wing fuel tanks. It was deployed and designated in the U.S. Air Force and by the British Royal Air Force as the Mustang Mk.II. It achieved very early operational effectiveness in various roles, including air defence, bomber escort duties and tactical support missions. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35   Warning! Not suitable for children under 14 years.

Military helicopters

1:72 V-22 OSPREY Tilt Rotor

€29.99

Article number: 510001463 Product: 1:72 V-22 OSPREY Tilt Rotor The project for the innovative Bell Boeing V-22 Osprey was set up during the 1980s but only after a long and complex development process, which lasted over twenty years, did it begin its distribution to the operational departments of the United States armed forces. The Osprey is a tilt rotor equipped aircraft with large three-blade propellers that allow landing and taking off vertically like a helicopter. Flight and transfer performance is similar to that of a conventional propeller plane. Thanks to its two powerful 6,150 HP Rolls-Royce T406-AD-400 engines, it manages to exceed 500 km/h in horizontal flight. The United States Marine Corps is using the V-22 in particular for landing support operations. The Osprey took part in its first operational missions in an Iraq in 2007. Detailed plastic kit in scale 1:32

Military figures & accessories

1:72 Vietnam War - Vietn. Army/Vietcong

€10.99

Article number: 510006079 Product: 1/72 Vietnam War - Vietn. Army/Vietcong The armed forces of the National Liberation Front (NLF) were composed both by regular units of the North Vietnam army and by irregulars. The term "vietcong" was used as a generic term for NLF soldiers, but in common iconography it represents the irregular guerrillas. The vietcong were armed with Soviet-produced weapons like the ubiquitous AK-47 Kalašnikov assault rifle, or the semi-automatic SKS carbine. In January 1968, they took part in the massive Tet Offensive during the night of the Vietnamese New Year.

Military figures & accessories

1:72 Walls and ruins II

€9.49

Military figures & accessories

1:72 WW2 - British Infantry

€10.99

Article number: 510006056 Product: 1/72 WW2 British Infantry On June 6th,1944, General Dempsey's troops of the British Expeditionary Force, composed by the 3rd and 50th English Division and by the Canadian 3rd Division, landed on the beaches of Normandy codenamed Sword, Juno, and Gold. The D-Day had thus come. The British Expeditionary Force was to land and quickly take over the town of Caen. Americans, landing at Omaha and Utha in the West, were to seize control of the Cotenin peninsula and the Cherbourg port. Contents 42 figures.

Military figures & accessories

1:72 WW2 - German Elite Troops (SS)

€13.99

Article number: 510006068 Product: 1/72 WW2 - German Elite Troops (SS) On 16th December, 1944, the German forces moved through the forests of the Ardennes, in Belgium, to attach the First U.S. Army. This was the Wehrmacht's last offensive on the western front before the final surrender in 1945. The "Wacht am Rhein" plan envisaged, on the part of General Von Rundstedt , the use of many elite units of Wehrmacht and of Waffen SS. The climax of the offensive was the siege of Bastogne, on December 21st, 1944. The town was defended by the 101st Airborne Division. The models in this kit are equipped with the innovative Sturmgewehr 44 which can be considered the precursor of today's assault rifles. Content 48 figures.

Military figures & accessories

1:72 WW2 - Italian Mount.Troops Alpini

€10.99

Article number: 510006059 Product: 1:72 WW2 - Italian Mount.Troops Alpini During World War II, Alpini divisions where used on several fronts. In 1942 the Italian expeditionary force was sent on the Russian front to support the Wehrmacht. It included the Alpini Julia, Tridentina and Cuneense divisions. The Italian Alpini took active part at the defense of the Don front but they were outnumbered and surrounded by the troops of the Red Army. The Alpini divisions were forced to retreat with a long and heroic march, in dire conditions, through the cold wastes of the Russian steppe. During the retreat they were also engaged in tough clashes. The most famous is the battle of Nikolajewka that took place on January1943

Military figures & accessories

1:72 WWII - Accessories and Bunkers

€22.99

Military figures & accessories

1:72 WWII American Infantry

€12.49

THE BOX CONTAINS 48 FIGURES The 1st and 29th Infantry Division of the U.S. Army, part of the fifth Corps led by General Bradlay, landed on June 6th, 1944, on the beach between Vierville sur Mer and Sainte Honorine des Pertes. The beach is historically known with its codename in Operation Overlord: Omaha Beach. The models in this kit are represented with the typical individual equipment of U.S. Infantry: the M1 Garand rifle, the B.A.R. automatic rifle, the Thompson submachinegun and the 7,65mm Browning machinegun.   Warning! Not suitable for children under 14 years.

Military figures & accessories

1:72 WWII German Motorcycles

€10.99

Article number: 510106121 Product: 1:72 WWII German Motorcycles THE BOX CONTAINS 16 FIGURES AND 4 MOTORCYCLES (2 with SIDECARS) Deatailed plastic kit of model WWII Deutsche Motorräder in scale 1:72

Model tanks

1:72 WWII German PAK40 AT Gun w/servants

€10.99

Article number: 510106096 Product: 1/72 WWII German PAK40 AT Gun w/servants The 75mm Panzerabwehrkanone Pak 40 was brought in service at the beginning of 1941 and became the standard anti-tank gun of the German army. Despite being less powerful than the more famous "88", it was employed on all the fronts with excellent results. A light and easy to handle weapon, it weighed only 1500 kg and it was able to penetrate a 70mm plate at a range of 2000 meters. Slightly modified, it was also used on tank destroyers like the Marder, the Stug III and the Hetzer.

Military figures & accessories

1:72 WWII U.S. Infantry Winter Uniform

€12.49

THE BOX CONTAINS 48 FIGURES

Military aeroplane models

1:72 XB-70 Valkyrie

€52.99

Article number: 510001282 Product: 1:72 XB-70 Valkyrie Model Dim.: 79 cm Decal for one version. In the Cold War era the dream of every strategist was to own a bomber with the load capacity and autonomy of the B-52 able to fly faster than the B-58 and so the B-70 programme came into being. After years on the drawing board, and cutthroat competition between Boeing and North American Aviation, the latter’s design won the heated competition in December 1957, with an order for the first 30 aircraft to be in service by 1965. In 1959, however, it became clear that the still untested B-70 would not survive the new aerial combat scene technology and the programme was cut back to a minimum. Two prototypes were finally constructed, the first of which took to the air in September 1964, and the XB-70 Valkyries showed themselves able to fly at speeds exceeding Mach 3. Today they are considered by many scholars and airplane buffs to be the most beautiful aircraft ever constructed.

Military ship models

1:720 U.S.S. George H.W. Bush CVN77

€27.99

Article number: 510105534 Product: 1/720 U.S.S. George H.W. Bush CVN77 Model Dim.: 44,7 cm Decals for one version The U.S.S. George H. W. Bush (CVN-77) is the tenth and final Nimitz class "supercarrier". Entered in service on 2009, is the most updated evolution in terms of technology and weapon systems of its class. One of the world’s largest warships, thanks to its displacement of 100,000 tons, it is powered with two Westinghouse nuclear reactors that permit, despite the impressive size, to reach 30 knots and to have a operating range almost unlimited. More than 80 aircrafts and helicopters are carried on board and are enable to enhance the military effectiveness of the warship. The "Bush" is also used for the development and testing of advanced weapon systems. On the deck of CVN-77, the first tests with unmanned drones, as the Northrop Grumman X-47B developed and designed for carrier-based operations, has been recently done.

Model railways

1:87 Locomotive BR50

€19.99

Article number: 510008702 Product: 1:87 Locomotive BR50 Model Dim.: 26,6 cm The BR50 was developed from 1937 onwards as a powerful goods hauling "standard" locomotive for use on branch lines. With a total of 3164 locomotives, produced by almost all German builders beetween 1938 and 1945, the BR50 was one of the most widely used steam locomotive classes in Germany. Due to the war, the last series was technically simplified and designated BR50 UK (Umbau Kriegslokomotive). The BR50 was developed to replace obsolete steam locomotives on branch lines. At 16t, the low axle load of the BR50 made it suitable for universal use. HO/1:87 Scale

Model motorcycles

1:9 Cagiva Elephant 850 Winner 1987

€64.99

Article number: 510104643 Product: 1:9 Cagiva Elephant 850 Winner 1987 Model Dim.: 23,8 cm COLOR INSTRUCTION SHEET - RUBBER PARTS - SCREWS, SPRINGS AND RUBBER TUBES The Cagiva Elefant was introduced in the early 1980s as an enduro motorcycle characterized by small to medium displacement engines. Following the acquisition of Ducati by Caviga, commercial production gradually evolved to incorporate the more powerful high performance twin-cylinder engine from 1985 onwards. The Cagiva Elefant competed against both German and Japanese motorcycles in the prestigious 1987 Paris-Dakar ‘off-road’ rally. The bike was characterized by its distinctive large fairing which covered the steel tube and light alloy trellis frame. The air-cooled twin-cylinder engine provided 80 HP at 8500 rpm and allowed the Italian bike to reach a maximum off-road speed of 185 km / h. The bike design reflected a "typical" Saharan configuration, with protective fairing, Ohlins off-road shock absorbers and low front fender. Detailed Plastic Kit

Model motorcycles

1:9 German Milit.Motorcycle w/sidecar

€65.99

Article number: 510007403 Produkt: 1:9 BMW R75 German Milit.Motor.w/Sidecar Model Dim.: 26,7 cm In 1938, based on a specific request of the German army, BMW and Zundapp received the brief to start a co-joint development project able to guarantee the highest number of common components to optimize the maintenance activities and the spare parts logistic. The prototypes had been released on 1940 and the production started at the beginning of 1941. Its peculiar feature was to have the side-car wheel that was driven with an axle connected to the rear wheel of the motorcycle. These were fitted with a locking differential and selectable gear ratios to optimize the on-road / off-road performance. The twin-cylinder engine with a displacement of 750 cc was capable of delivering 26 HP. The BMW R75 was able to reach the max speed of 95 Km/h. It was widely used, proving its realiability and sturdiness, on all most important operating theaters and in all environmental conditions (from North Africa to Russia). Deatailed plastic kit of model BMW R75 German Milit. Motor. w/Sidecar in scale 1:9

Model motorcycles

1:9 KDF. 1 Typ 82 Kübelwagen

€104.99

Article number: 510007405 Product: 1:9 KDF. 1 Typ 82 Kübelwagen Mod.Dim.: 41,5 cm Working suspensions - Openable lid - Higly detailed engine - Higly deteiled decals sheet - Canvas roof and windows - Working canvas roof - Steering front axle - Rubber tires - Colors instructions sheet Typ 82 Kubelwagen is one of the most famous military cars of the Second World War. It was designed by the engineer Ferdinand Porsche and produced by the German manufacturer Volkswagen. The project was born to have a simple vehicle, easy to build and easy to maintain and repair. The overall vehicle design is without bends and the bodywork plates are flat. Great simplicity even in the layout of the frame : just a central tube and the back support for the engine and the gearbox. The Kubelwagen, thanks to its petrol engine with a displacement of 998 cm3, was able to reach the max speed of 80 Km/h. The vehicle did not have 4x4 traction but it was extremely reliable on all types of terrain and it was present on all fronts, often in very tough environmental conditions, where the German Army fought during the entire World War II. The Kubelwagen could be armed with a support for a MG34 or MG42 machine gun. Detailed Plastic Kit of model

Model motorcycles

1:9 Norton Manx 500cc 1951

€59.99

Article number: 510004602 Product: 1/9 Norton Manx 500cc 1951 Mod.Dim.: 22 cm This glorious English manufacturer made a comeback after the Second World War. In 1949 this famous single-cylinder 500, ridden by Daniell, won the first world championship race to be held in England, on the torturous Tourist Trophy circuit. In 1950 and 1951 it was ridden to world championship title victory by the fearless Englishman G. Duke. Innovative for its time, it was the first bike to use an upper and lower cradle-type chassis. Deatailed plastic kit of model Norton Manx 500cc 1951 in scale 1:24

Model motorcycles

1:9 NSU HK 101 "Kettenkrad"

€87.99

Article number: 510007404 Product: 1:9 NSU HK 101 "Kettenkrad" Model Dim.: 32,9 cm Working suspensions - Openable lids - Higly detailed engine - Higly deteiled decals sheet - Running tracks - Tool set At the beginning, Sd.Kfz 2 "Kettenkrad" was developed as light means of transport for airborne troops. It was a small vehicle with the front similar to a motorcycle, characterized by its handlebars and its central wheel and by a rear designed to Feature a 6 wheels tracked structure. The Kettenkrad could transport 2 passengers, additionally to the driver, or transport goods and ammunitions. It could reach a top speed of 70 km/h thanks to its OHV inline-four Opel water-cooling, the same featured on Opel Olympia car. Through its tow hook it was able to drag up to 450 kg of goods as antitank cannons of moderate size. The Kettenkrad resulted to be perfect in carrying loads and people on uneven grounds, as those sandy in North Africa or muddy ones is Russian Steppe. Later, since 1944 onwards, it was used on runways for handling of jet fighters Messerschmitt Me 262 and jet bombers Arado A-234. Deatailed plastic kit of model NSU HK 101 "Kettenkrad" in scale 1:9

Model motorcycles

1:9 Suzuki RG500 XR27 Team H.B.S.

€69.99

Article number: 510104644 Product: 1:9 Suzuki RG500 XR27 Team H.B.S. 1978 The Suzuki RG 500 is considered to be an icon of two-wheel racing motorcycles of the 1970s. It was specifically developed by the Japanese manufacturer Suzuki for the racing world, and built around the reliable and powerful 4-cylinder 500cc 2-stroke engine which provided up to 90 HP. With this bike Suzuki participated in the world championships in the 500 class, achieving an incredible series of consecutive victories that led to it retaining the "constructors" title for several years. One of the architects of this successful period was the British rider Barry Sheene, who also won the "pilots" title for two consecutive years, in 1976 and 1977. In addition to international competitions, the Suzuki RG 500 was particularly appreciated by private riders who raced it in both international competitions and in minor leagues. Detailed plastic kit

Model motorcycles

1:9 Triumph

€41.99

Article number: 510007402 Product: 1/9 Triumph Model Dim.: 23,1 cm Decals for 4 versions. At the start of the 2nd WW, Great Britain did not have all the technical equipment needed for such a conflict, therefore a lot of vehicles were ordered urgently. Motorcycles, mainly used by the well known DR "Dispatch Riders" for communication between different units, were converted from civilian bikes with small changes, like military color and the addition of frames for the canvas bags. Triumph proposed in short time the model 3HW, based on the civilian "Tiger 80", with an overhead valve engine and parallel forks. This model served on all fronts where the British Armed Forces fought, such as Africa, Europe and Asia. After 2nd WW these motorcycles were delivered to many other nations, such as Italy and Greece, where the Triumphs served for a long time thanks to their reliability and robustness. Deatailed plastic kit of model Triumph in scale 1:9

Model motorcycles

1:9 Vespa 125 "Primavera"

€49.99

Article number: 510104633 Product: 1:9 Vespa 125 "Primavera" Length of the model 200 mm UPGRADED PARTS Vespa is an icon of design and style of the "made in Italy" and a real myth on two wheels. The first Vespa was born in the second post-war period, in 1946, and was immediately characterized by simple and elegant lines, and by a practical, functional and reliable project developed around the famous steel body-frame. The effective mix of design and functionality was the strength of the Vespa, that became, in a short time, an extraordinary commercial success worldwide. During the years Vespa was able to keep its uniqueness but improved in style and features. One of the most famous versions was the Vespa Primavera 125 launched in 1968. Thanks to an improved engine, a better performance and an easiness of driving, it remained on the market throughout the 1970s. The Primavera 125 is still today one of the most preferred Vespa by collectors and fans of the famous Italian two-wheeler manufacturer Deatiled static model kit

Model motorcycles

1:9 WLA 750 US Military Motorcycles

€51.99

Article number: 510007401 Product: 1/9 WLA 750 US Military Motorcycles Mod.Dim.: 27,7 cm This impressive motorcycle, built in the late 30s to the requirements of the American Police forces, and, in limited quantities, for the civil market, was used during the 2nd World War also by the American armed forces. Very sturdy and reliable, this motorbike was used by the military Police for surveillance, and by couriers for rapid delivery of messages between front line units, thanks to its good road-holding and the performance of its powerful engine. Detailed Plastic Kit of model WLA 750 US Military Motorcycles in scale 1:9

Model tools

Craft Knife with 5 blades

€8.29

Article number: 510050818 Product: Craft knife with 5 blades (n°11) Italeri Professional tools and brushes for a world which holds, in its details and precision, the essence of its nature.

Model tools

Cutting Mat A 230x160mm

€9.99

Model tools

Fine serrated locking tweezers - 160mm

€12.49

Model paints

IT AcrylicPaint Flat Ital.Interior Green

€3.69

  Warning! Not suitable for children under 14 years.

Model tools

IT Plastic Modelling Beginner Tool-Set

€13.99

Article number: 5100050830 Product: IT Plastic Modelling Beginner Tool-Set Set of tools for beginners to facilitate the correct assembly of the kit The set contains: 1 brush, 1 cutter, 1 file, 1 tweezer

Model brushes

IT Round Brush 0 Synthetic brown (1)

€3.29

Model brushes

IT Round Brush 0/10 Synthetic brown (1)

€2.79

Model brushes

IT Round Brush 0/3 Synthetic brown (1)

€2.99

Model brushes

IT Round Brush 0/5 Synthetic brown (1)

€2.99

Model brushes

Italeri Flat Brush 0 Synthetic (1)

€1.39

Model brushes

Italeri Flat Brush 00 Synthetic (1)

€1.19

Model brushes

Italeri Flat Brush 1 Synthetic (1)

€1.59

Model brushes

Italeri Flat Brush 2 Synthetic (1)

€1.69

Model brushes

Italeri Flat Brush 3 Synthetic (1)

€1.79

Model brushes

Italeri Flat Brush 4 Synthetic (1)

€1.99

Model brushes

Italeri Flat Brush 6 Synthetic (1)

€2.29

Model brushes

Italeri Flat Brush 8 Synthetic (1)

€2.89

Model tools

Italeri Long Nose Plier (1)

€11.49

Article number: 510050812 Product: Italeri Long Nose Plier (1) Italeri Professional tools and brushes for a world which holds, in its details and precision, the essence of its nature.

Catalogues & merchandise

ITALERI Paper shopper 32x40x13cm medium

€1.29

Medium paper bag with printing of the brand Italeri

Model tools

Italeri Plastic Modelling Tool-Set

€19.99

Article number: 51000815 Product: Italeri Plastic Modelling Tool-Set Italeri Professional tools and brushes for a world which holds, in its details and precision, the essence of its nature.

Model tools

Italeri Precision Tweezer, curved (1)

€5.99

Article number: 510050813 Product: Italeri Precision Tweezer, curved (1) Italeri Professional tools and brushes for a world which holds, in its details and precision, the essence of its nature.

Model tools

Italeri Precision Tweezer, straight (1)

€5.99

Article number: 510050814 Product: Italeri Precision Tweezer, straight (1) Italeri Professional tools and brushes for a world which holds, in its details and precision, the essence of its nature.

Model brushes

Italeri Round Brush 0 Synthetic (1)

€1.69

Model brushes

Italeri Round Brush 0 Synthetic (1)

€1.39

Model brushes

Italeri Round Brush 00 Synthetic (1)

€1.59

Model brushes

Italeri Round Brush 000 Synthetic (1)

€1.49

Model brushes

Italeri Round Brush 000 Synthetic (1)

€1.09

Model brushes

Italeri Round Brush 1 Synthetic (1)

€1.59

Model brushes

Italeri Round Brush 2 Synthetic (1)

€1.69

Model tools

Italeri Sprue Cutter for Plastic (1)

€9.49

Article number: 510050811 Product: Italeri Sprue Cutter for Plastic (1) Italeri Professional tools and brushes for a world which holds, in its details and precision, the essence of its nature.

Model tools

Masking tape roll 3mm x18m (2)

€4.891 m = €0.27

Model tools

Masking tape roll 6mm x18m (2)

€5.491 m = €0.31

Model tools

Mini diamond file set (3 pcs) - 100 mm

€13.99

Italeri Professional tools and brushes for a world which holds, in its details and precision, the essence of its nature.

Model tools

Mini snips straight (for photo-etched)

€16.99

Article number: 510050817 Product: Mini snips straight (for photo-etched) Italeri Professional tools and brushes for a world which holds, in its details and precision, the essence of its nature.

Model tools

Pin Vice with 5 Drills

€13.99

Model tools

Professional Craft Knife w/6 Blades

€16.99

Model tools

Professional Cutter

€13.99

Model tools

Spare Blades pointed (5) #50822

€4.59

Model paints

IT AcrylicPaint Gloss White 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Gun Metal 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Gloss Orange 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Aluminium 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Black 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Leather 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Steel 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat White 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Gloss Black 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Gloss Silver 20ml

€3.691 l = €184.50

Model paints

IT Acrylic Paint Flat Medium Brown 20 ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Fl. Insignia Yellow 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Dark Gray 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Gull Gray 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Gunship Gray 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Red 20 ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Wood 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Gloss French Blue 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Gloss Yellow 20ml

€3.691 l = €184.50

Model paints

IT Dark Brown (Acrylic Model Wash)

€3.691 l = €184.50

Model paints

IT Grey (Acrylic Model Wash)

€3.691 l = €184.50

Model paints

IT Oiled Earth (Acrylic Model Wash)

€3.691 l = €184.50

Model trucks

Acryl Set International Trucks &Trailers

€22.49

Article number: 510000435 Product: Acryl Set International Trucks &Trailers Each set contains 6 bottles of Italeri Acrylic Paints (20ml each).

Military aeroplane models

Acryl Set Modern USAF/U.S. Navy Aircraft

€22.49

Article number: 510000431 Product: Acryl Set Modern USAF/U.S. Navy Aircraft Each set contains 6 bottles of Italeri Acrylic Paints (20ml each)

Model tanks

Acryl Set WWII Military German Army

€22.49

Article number: 510000433 Product: Acryl-Farbset Military German Army Each set contains 6 bottles of Italeri Acrylic Paints (20ml each)

Military aeroplane models

Acrylic Set WWII Luftwaffe Aircraft

€22.49

Article number: 510000436 Product: Acryl Set WWII Luftwaffe Aircraft Each set contains 6 bottles of Italeri Acrylic Paints (20ml each).

Model tanks

Acrylic Set WWII Military Allied Army

€22.49

Article number: 510000440 Product: Acryl Set WWII Military Allied Army Each set contains 6 bottles of Italeri Acrylic Paints (20ml each).

Model paints

IT Acrylic Paint Flat Azure Blue 20 ml

€3.691 l = €184.50

Model paints

IT Acrylic Paint Flat Light Brown 20 ml

€3.691 l = €184.50

  Warning! Not suitable for children under 14 years.

Model paints

IT Acrylic Paint Flat Light Green 20 ml

€3.691 l = €184.50

Model paints

IT Acrylic Paint Flat Medium Blue 20 ml

€3.691 l = €184.50

Model paints

IT Acrylic Paint Flat Middle Stone 20 ml

€3.691 l = €184.50

Model paints

IT Acrylic Paint Flat Orange 20 ml

€3.691 l = €184.50

Model paints

IT Acrylic Paint Int. Grey Green 20 ml

€3.691 l = €184.50

Model paints

IT Acrylic Thinner 60 ml

€4.591 l = €76.50

Model paints

IT AcrylicPaint Dark Earth Ana 617 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Dark Green RLM71 20ml

€3.691 l = €184.50

  Warning! Not suitable for children under 14 years.

Model paints

IT AcrylicPaint Fl. brown camoufl. 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Fl. Dark Ghost Gray 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Fl. hazel clear 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Fl. Marrone mimet.1 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Fl. Marrone mimet.2 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Fl. Seablue n.Specu.20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Fl. Skin Tone Ligh 20 ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Fl. Skin Tone warm 20 ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Fl.Blue Gray n.Spe. 20ml

€3.69

Model paints

IT AcrylicPaint Fl.Sandgelb RAL1002 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Fl.US Arm.Oliv.Drab 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Armor Sand 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Dark Green 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Dark Gull Gray 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Dark Tan 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Desert Tan 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Earth Red 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Field Drab 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Green 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Guards Red 20 ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Insignia Red 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Light Flesh 20 ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Light Gray 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Med.Sea Grey 20 ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Medium Gray 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Medium Green 20 ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Medium Green 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Military Green 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Olive-Drab 20 ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Pale Green 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Rubber 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Rust 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Sand 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Flat Verde Memi.2 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Gloss Blue/Blu Ang. 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Gloss Brass 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Gloss Clear 35 ml

€4.391 l = €219.50

Model paints

IT AcrylicPaint Gloss Gold 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Gloss Green 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Gloss Light Blue 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Grey-Green RLM74 20ml

€3.69

Model paints

IT AcrylicPaint Grey-Violet RLM75 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Light Blue RLM65 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Light Blue RLM76 20ml

€3.691 l = €184.50

  Warning! Not suitable for children under 14 years.

Model paints

IT AcrylicPaint Pz. OliveGreen 1943 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Pz. Schoko RAL8017 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Pz.Black-Gr.RAL7021 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Pz.Dark Yellow 1943 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Rus.Armor Green 20ml

€3.691 l = €184.50

Model paints

IT AcrylicPaint Semigloss Clear 35 ml

€4.391 l = €219.50

Model paints

IT Black (Acrylic Model Wash)

€3.691 l = €184.50

Model paints

IT Rust (Acrylic Model Wash)

€3.691 l = €184.50

Model varnishes/ adhesives

ITALERI Liquid Cement w/ Brush 15ml

€7.491 l = €499.33

Article number: 510003990 Product: ITALERI Liquid Cement w/ Brush 15ml Liquid cement for plastic designed and recommended for static modelling 15 ml. Thin Synthetic brush with ergonomic handle for precision assembly. Glass bottle with anti evaporisation system.   Warning! Not suitable for children under 14 years.

Model car kit

1:24 Mercedes 500 SLC

soon available again

Article number: 510003633 Product: 1:24 Mercedes 500 SLC During the 1960s Mercedes-Benz began development of a line of sports cars which were characterized by high performance and also great attention to aspects of motoring that would meet the requirements of the expanding "luxury" car market sector. The acronym SL (Sport and Leicht), identifies the various models that over the years have evolved and been presented to the market. In the 1970s, the German automotive group launched the R107 and C107 series in the Roadster and Coupé versions, which went on to quickly achieve notable commercial success. Arising from the C107, the "top of the range" coupé SLC 500 evolved, the production of which, lasted for almost a decade. With a 4973cc engine capable of delivering 237 HP the Mercedes SLC 500 became a benchmark for the "premium" market, which in the 1970s, also saw the origin of some iconic models, which even now, capture the imagination and dreams of many collector and classic car enthusiasts. Detailed Plastic Kit

Model trucks

1:24 SCANIA R730 Streamline Show Truck

soon available again

Article number: 510003952 Product: 1:24 SCANIA R730 Streamline Show Truck Model Dim.: 24,7 cm SUPER DECALS SHEET - SUPER CROMED ADHESIVE - ADDITIONAL CHROMED PARTS - NEW TYRES - NEW CHROMED WHEELS The Scania R series heavy tractor was developed on the current needs of the world market. SCANIA engines are built to carry out the most demanding jobs and highly appreciated as they are robust, reactive and efficient. The Scania R Series is designed to meet the highest demands in terms of fuel economy and reliability. The exterior design gives the vehicles an imposing appearance on the road and is considered the number one for making fantastic "SHOW TRUCKS", the famous decorated tractors. The extraordinary styling of the exterior is combined with exclusive new interiors that offer exceptional comfort for the driver and a wide range of color and material options. Our model is also completed by a fantastic decals sheet and an accurate sheet of metallic adhesives, ready for application, for a correct finish of the tractor. In addition, the package contains new chromed plastic parts to make the model particularly realistic. Detailed plastic kit in scale 1:24

Model trucks

1:24 Scania R730 V8 Topline Imperial

soon available again

Article number: 510003883 Product: 1/24 Scania R730 V8 Topline Imperial Model Dim.: 24,7 cm SUPER STICKERS & DECALS SHEET - ADDITIONAL CHROMED PARTS AND WHEEL RIMS The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the current world market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series is designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road and is considered the number one for "SHOW TRUCKS", the famous decorated tractors. The extraordinary exterior style is matched with exclusive new interiors which provide exceptional comfort for the driver and a wide range of colour and material options. In addition, our tractor model is finished with fantastic decals and metallized stickers ready to be applied. The packaging also contains new chromed plastic parts that give the model a realistic appearance.

Trailers & accessories

1:24 Truck Rubber Tyres (8x)

soon available again

8 RUBBER TYRES IN ONE BOX   Warning! Not suitable for children under 14 years.

Model trucks

1:24 VOLVO F-16 Globetrotter

soon available again

Article number: 510003923 Product: 1:24 VOLVO F-16 Globetrotter Model Dim.: 24,0 cm About ten years after the release of the F-12, and because of its success with it, in 1988 Volvo launched the new F-16 with its state-of the-art features. Equipped with heavy-duty chassis, the truck features extensive hauling capacity, low fuel consumption and high travel comfort combined with a reliable and powerful engine which made it a leader in its category. The characteristics of ist 6 cylinder turbo-compressed 16000cc Intercooler engine are an output of 465 HP at 1200 rpm. The F-16 is thus well equipped to take care of long distance heavy load trucking. Of the various Versions offered by Volvo, our model represents the 2-axle tractor variant with the high (GLOBETROTTER) cabin. Detailed Plastic Kit of model VOLVO F-16 Globetrotter in scale 1:24

Military figures & accessories

1:35 20' Military Container

soon available again

Article number: 510006516 Product: 1:35 20' Military Container Model Dim.: 17,4 cm 100% NEW MOULD Decals for 3 versions The 20-feet freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container – in terms of size, volumes and loading capacity – makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has became more effective and faster. Even the warehouses and stocking areas management became easier and more flexible.Thanks to its features and flexibility the 20-feet container has been adopted by several Armies to optimize the logistic and the ground support activities.

Military figures & accessories

1:35 Accessories

soon available again

Military figures & accessories

1:35 Brick Walls

soon available again

Model tanks

1:35 Ger. Panzerjäger I

soon available again

Article number: 510006577 Product: 1:35 Ger. Panzerjäger I Model Dim.: 12,6 cm NEW GLUEABLE RUBBER TRACKS - DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET - PHOTO-ETCHED FRET CONTAINS 1 FIGURE The self-propelled Panzerjager I tank destroyer was built on the hull of the Panzer I light tank and armed with an effective weapon of the period, the 47mm Czechoslovakian anti-tank gun. The Panzer I tank had in fact a protection and armament capability no longer in keeping with the operational needs of the German armoured divisions. However, it had good mobility and a robust chassis which was ideal for the positioning of the anti-tank gun, which was sited behind an open steel shield. The Panzerjager I was deployed by the Wehrmacht during the invasion of France, in North Africa and in the early stages of Operation Barbarossa in 1941. It held a goodammunition supply, with over 70 rounds available for gunners. It was systematically replaced during the war bymore heavily armored tank destroyers, better equipped to deal with modern tank armor against which the 47 mm gun proved to be ineffective. Detailed Plastic Kit

Military figures & accessories

1:35 House Corner

soon available again

Model tanks

1:35 M4A2 U.S. Panzer Marine Corps

soon available again

Article number: 510006583 Product: 1:35 M4A2 U.S. Panzer Marine Corps Model Dim.: 16,8 cm NEW GLUABLE T54E1 TRACKS - DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units and it formed the backbone of United Stated armored forces during at those time. It has been produced in several variants and versions. The first version to be produced on wide scale was the Sherman M4A1 characterized by the rounded edges of the fully casted upper hull. Even the turret had a rounded appearance. However, the most important strength of the tank was its project. The Sherman was reliable, cheap, and easy to produce in great numbers. The M4A2 version was like the previous one but it was Diesel-powered with General Motors Twin G-41 Engine. At the beginning the M4A2 was dedicated to support the war activities of allied nations as Soviet Union and Great Britain but a lot of tanks were used by the United States Marine Corps. Actively used in the battles for the reconquest of the archipelagos of Pacific Ocean, they played a fundamental role in the destruction of the powerful fortifications built by the Japanese Army. Detailed plastic kit in scale 1:35

Model tanks

1:35 M923 Hillbilly Gun Truck

soon available again

Article number: 510006513 Product: 1:35 M923 Hillbilly Gun Truck Model Dim.: 24,8 cm UPGRADED MOULDS Decals for one version This medium cargo truck of the 5 ton category, is representative of today's generation of logistical vehicles of the U.S. Forces. It entered service in the early eighties. The M-923 has an extremely sturdy structure and excellent off-road features, which are necessary to secure the flow of material to the front line combat units. Based on this chassis many versions have been produced: wrecking trucks, tank trucks, mobile maintenance and communication trucks. The A-1 version is characteristic because of its large off-road tires which have earned it the nick-name "big-foot". During its operational use, and in particular in the most recent military campaigns in which it was employed as Iraq and Afghanistan, the "Big Foot" has often been modified with the addition of "home made" protections to reduce the damages caused by the fire of light weapons. However, the personalization of the vehicles, made "on field" by the crews, were possible thanks to the excellent platform offered by-M-923 trucks.

Military figures & accessories

1:35 Observation Post

soon available again

Model tanks

1:35 Pz.Kpfw. VI Ausf. E late production

soon available again

Article number: 510006754 Product: 1:35 Pz.Kpfw. VI Ausf. E late production The Panzerkampfwagen VI Ausf. Tiger I is undoubtedly one of the most famous tanks of World War II. It was developed to provide the armored divisions of the Wehrmacht with a heavily armored and heavily armed tank to complement the more common medium tanks, Panzer III and Panzer IV, which were no longer effectively countering enemy tanks. Its primary armament consisted of the renowned and lethal long-barreled 88mm KwK 36 L/56 anti-tank gun. Installed in the turret and protected by a heavy 120mm shielding, it could penetrate the armor of any contemporary enemy vehicle even at long distances. Deployed on all major theatres of operation, it played an active role in German military operations in Normandy and the Western Front. Despite facing issues of reliability and deployment, the heavy tank, when operated by skilled crews, was always greatly feared by the Allied forces.   Warning! Not suitable for children under 14 years.

Military figures & accessories

1:35 Telegraph Poles

soon available again