CARSON Product Range

Dive into the world of Carson: Discover everything about RC models, accessories, electronics, and plastic model kits – from entry-level sets to pro-grade vehicles. Your model-building journey starts here at the Carson RC model shop!

More

Sort by:

Top sellers
  • Top sellers
  • New
  • Price ascending
  • Price descending
Filter

Filter
Price
Category
Brand
Brands & licenses
Scale
1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR

- 20 %

RC truggies & RC monster trucks

1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR

500404292
€99.99

€124.99

The 1:10 Mega Duster 3.0 brings pick-up truck styling, LED lighting and a fully assembled RTR setup into a 430 mm off-road RC car built for rough ground. With independent suspension, coilover shocks and a fully suspended layout, the chassis is set up to absorb uneven surfaces while the multi-coloured printed body keeps the truck's desert-racer look clear in motion. Its 2.4 GHz radio system uses digital proportional control, so steering and throttle inputs can be fed in with fine adjustment rather than simple on-off commands. The included Li-Ion drive battery is rated at 7.4 V and 1500 mAh, and the USB charger is part of the set, along with 4 AA transmitter batteries. At 310 mm wide and 200 mm high, the truck carries a broad monster-truck footprint, while the stated weight of 1364 g supports a planted feel over gravel and dirt. Splash-proof electronics expand the running window when the surface is dusty or damp, and the stated driving time reaches up to 25 minutes. The Mega Duster 3.0 suits open ground, compacted trails and loose stone where the 115 mm all-terrain tires can work for grip and control. Age 14+ is stated for this model, and the fully assembled format gets the focus quickly onto driving lines, throttle control and off-road handling rather than workshop time.  Warning! Not suitable for children under 14 years.

1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR
1:32 Deemon X, RC buggy, 100% RTR 2WD

RC cars

1:32 Deemon X, RC buggy, 100% RTR 2WD

500404322

€29.99

Compact scale and lively handling give the 1:32 Deemon X the feel of a true off-road RC buggy in a format built for quick runs at home or on small garden tracks. The 2WD layout, 2.4 GHz remote control system and selectable speed levels create a clear, responsive driving setup, while the elaborately printed body shell and switchable LED lighting keep the model visually sharp in motion. At 115 mm long, 86 mm wide and 53 mm high, the buggy fits neatly into tabletop courses, improvised obstacle lines and tighter turns where larger vehicles need more room. The 3.7 V 100 mAh LiPo drive battery supports up to 15 minutes of driving time, and recharging happens via the included USB charger. Included pylons and the jump ramp add concrete course elements for slalom sections, launch points and repeatable stunt practice rather than simple straight-line driving. The 69 g weight keeps the model nimble when changing direction, and the rubber tires give the chassis the grip needed for uneven surfaces. Short sessions on indoor floors, hallway tracks or paved garden paths suit the Deemon X especially well, whether the focus is clean cornering, quick acceleration bursts or ramp jumps. With 2 speed settings and a complete RTR package, the buggy moves easily between first RC laps and fast, compact course driving

1:32 Deemon X, RC buggy, 100% RTR 2WD
1:12 MB Unimog U300 THW, RC truck, 100% RTR

- 53 %

Models & trailers

1:12 MB Unimog U300 THW, RC truck, 100% RTR

500907722
€94.99

€200.00

The Unimog line became known for compact dimensions, portal-axle capability and utility work across rough terrain, and that character carries into this 1:12 MB Unimog U300 THW RC truck. In blue THW livery, the model combines a 450 mm body length with a powerful electric motor, front LED lighting and a 2.4 GHz control system for controlled driving on paths, gravel and other uneven ground. Its 220 mm width and 260 mm height give the truck a tall, purposeful stance that suits the U300 shape, while the 2052 g weight adds substance in motion. The remote control handles steering and throttle proportionally, so small stick inputs translate into finer changes than simple on or off control. A separate horn function can be triggered from the transmitter, and motor sound control adds another layer to the driving scene. The 7.4 V 850 mAh Li-Ion drive battery is included, and the RTR setup also includes the 2.4 GHz transmitter, a USB charger and transmitter batteries. That combination suits first runs in the hobby as well as relaxed utility-style driving sessions with a scale vehicle theme. On compacted dirt, paving or loose gravel, the THW truck can be guided through tighter turns, short climbs and stop-start route changes while the illuminated front end keeps the model visually defined.

1:12 MB Unimog U300 THW, RC truck, 100% RTR
1:20 MB Arocs Goldhofer, RC truck, 100% RTR

RC lorries & RC trucks

1:20 MB Arocs Goldhofer, RC truck, 100% RTR

500907307

€109.99

Heavy-haul transport is a defining part of construction logistics, and the 1:20 MB Arocs Goldhofer brings that role into RC form with a 1000 mm long truck and low loader combination. The fully assembled RTR set combines remote-controlled driving with functional trailer handling, creating a model that looks at home moving machinery between workshop shelf and jobsite scene. At 155 mm wide and 185 mm high, the model carries the long, low stance of a transporter, while the 1350 g weight gives the combination a substantial feel in hand. The installed reversing light works automatically together with the tractor unit, adding a realistic response during manoeuvres without needing a separate command. Included in the set are the ready-to-run model, a 2.4 GHz RC system, 2 x 4.8 V NiMH batteries, a USB charger and 2 x AA transmitter batteries. The 30 minute driving time supports extended loading runs, repositioning moves and repeated coupling sequences. Minimum age: 8 years. The low-bed layout suits transport scenes with construction machinery or other scale loads, and the remote-controlled ramp and support add movement beyond simple forward driving. On a floor layout, workshop setup or construction-themed display, the MB Arocs Goldhofer turns loading, uncoupling and trailer positioning into the central part of the action.

1:20 MB Arocs Goldhofer, RC truck, 100% RTR
1:10 Dustor, RC car, 2.4 GHz 100% RTR

RC cars

1:10 Dustor, RC car, 2.4 GHz 100% RTR

500404352

€69.99

The 1:10 Dustor brings full-size RC presence to first runs and casual off-road sessions, with a 540 mm length, 300 mm width and 240 mm height that give the model a broad, planted stance on mixed surfaces. A brushed motor drives the 2WD rear-wheel-drive layout to speeds of up to 20 km/h, while the 2.4 GHz radio system reaches up to 75 m for clear control across open ground. Its fully assembled format keeps the focus on driving, and the included 7.4 V 500 mAh Li-Ion battery works with the USB charger for straightforward turnaround between sessions. At 985 g, the chassis stays light enough for responsive direction changes while still carrying the visual weight expected from a 1:10 off-road model. Front and rear impact protection support everyday running where gravel edges, kerbs and clipped markers are part of the route. The included transmitter is powered by 2 x LR06 AA batteries, so the full set is prepared for use without extra radio equipment. On asphalt, compacted paths or light terrain, the combination of suspension travel, rear-drive handling and off-road tires creates a controlled, approachable driving character. With up to 30 minutes of running time per charge, the Dustor suits park runs, open-yard driving and repeated practice laps where longer sessions matter.

1:10 Dustor, RC car, 2.4 GHz 100% RTR
1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer

RC tractors

1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer

500907705

€99.99

The DEUTZ-FAHR 8280 TTV brings the look of a modern farm tractor into 1:16 scale with a matching trailer, 2.4 GHz radio control and working sound functions. Engine sound, horn and LED front lighting create a more lifelike driving scene, whether the tractor is rolling across loose soil, garden paths or a carefully arranged display setup. At 750 mm long, 180 mm wide and 234 mm high, the model has a substantial footprint that suits towing and transport play. The rigid axle supports off-road running, while the steering is tuned for precise control and a small turning radius, helping the tractor change direction cleanly and guide the trailer through tighter spaces. The officially licensed DEUTZ-FAHR styling carries the 8280 TTV identity into the bodywork, giving the model a recognisable agricultural character. The accessible battery compartment under the hood allows quick battery changes between runs. Included are the ready-to-run tractor with trailer, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR03 AAA transmitter batteries. With a weight of 1731 g and a driving time of 90 minutes, the set is equipped for extended driving sessions focused on towing, positioning and farm-style transport action.

1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer
1:8 Drakuro BL 3S, RC car, 4WD RTR

RC buggys

1:8 Drakuro BL 3S, RC car, 4WD RTR

500409097

€299.99

The 1:8 Drakuro BL 3S RTR brings brushless power, long-travel suspension and a wide 370 mm stance into one large-scale RC car built for fast off-road running. At 500 mm long, 330 mm high and 3402 g in weight, the chassis carries real presence on dirt tracks, gravel stretches and open ground, with a top speed of up to 65 km/h. A longitudinal aluminum reinforcement brace adds rigidity through the centre of the chassis, and reinforced steel drive shafts at the front and rear transfer power under load. The waterproof 30 kg steering servo uses metal gears for direct steering input, while splash-proof electronics and housing support running in changing conditions. Height-adjustable body mounts make it easier to set the shell position cleanly over the chassis, and LED lighting at the front, rear and roof keeps the model clearly defined when the light drops. The XT90 high-current connector system is designed for low-loss power transmission within the drive setup. The ready-to-run package includes a 2.4 GHz remote control and instructions, so the focus stays on driving rather than sourcing the core control gear. With 14 Years marked in the data, the Drakuro suits high-speed bashing sessions, repeated acceleration runs and broad off-road lines where suspension travel, steering force and chassis size all come into play.  Warning! Not suitable for children under 14 years.

1:8 Drakuro BL 3S, RC car, 4WD RTR
1:87 M-B 200/8, RC car, 100% RTR trailer

RC models in 1:87 scale

1:87 M-B 200/8, RC car, 100% RTR trailer

500504169

€114.99

The Mercedes-Benz /8 series shaped everyday road traffic in the late 1960s and 1970s, and this 1:87 M-B 200/8 captures that classic saloon presence in a compact RC format. The green body and matching trailer combine a recognisable road-car silhouette with radio-controlled movement, creating a small-scale setup that carries both collector appeal and active driving use. Its 1:87 scale makes the model easy to place on a desk, shelf, or layout, while the trailer adds a second element that changes the overall scene and gives the combination a more complete towing look. The 100% RTR specification means the driving package is prepared for immediate use, and 5 included batteries cover the initial power requirement stated in the data. With a minimum age marking of 14 years, the model sits in a hobby-focused range rather than a preschool toy segment. The compact format also suits short driving sessions where a larger RC vehicle would need more floor space. Whether used for careful indoor manoeuvres, as a small addition to a model collection, or as a road-car counterpart within a miniature vehicle lineup, the M-B 200/8 with trailer brings motion into a classic passenger-car theme. The combination of saloon and trailer gives the setup a distinct identity both at rest and in operation.  Warning! Not suitable for children under 14 years.

1:87 M-B 200/8, RC car, 100% RTR trailer
1:87 MB 1620 Tarp Truck, RC truck, 100% RTR

RC models in 1:87 scale

1:87 MB 1620 Tarp Truck, RC truck, 100% RTR

500504157

€139.99

The 1:87 MB 1620 Tarp Truck with trailer brings moving road traffic into H0 railway scenes with compact dimensions of 187 x 28 x 38 mm and fully assembled 100% RTR equipment. Official Mercedes-Benz Trucks licensing, fine printwork and the blue finish give this RC truck a recognisable presence beside stations, freight depots and urban track sections. Its 2.4 GHz radio system supports interference-free control and allows several models to run at the same time, which suits busy diorama setups with more than one active vehicle. The very small turning radius helps the truck work through narrow streets, loading areas and switching zones where larger RC formats would look out of scale. The trailer extends the road-train silhouette and the removable tarp changes the look of the load area for different scene concepts. Included in the set are the ready-to-drive model, 2.4 GHz remote control system, Li-Ion drive battery 3.7 V / 75 mAh, 4 transmitter batteries LR03 / AAA, and instructions. On a layout, the truck can roll alongside trains, serve as a delivery vehicle near a goods shed or move through a city section with controlled speed changes and steering inputs. Collectors can also place it as a static display piece, with the integrated driver figure and licensed cab details carrying the scale effect even when the model is parked.

1:87 MB 1620 Tarp Truck, RC truck, 100% RTR
1:60 Nano Racer Aston Martin V12 Vantage RC car

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage RC car

500404338

€17.99

The Aston Martin V12 Vantage brings a well-known British sports car shape into a compact 1:60 Nano Racer format with radio control and a red body that stands out clearly on small driving layouts. Its officially licensed appearance follows the full-size model closely, while the 79 mm length, 33 mm width and 22 mm height keep the car suited to short straights, table-edge turns and quick direction changes in limited space. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The controller works on 2.4 GHz and reaches up to 15 m, giving the car enough room for indoor laps and compact obstacle courses. The same control system allows up to 50 vehicles to run simultaneously, which opens the door to group sessions without frequency clashes. With a weight of 25 g, the small chassis stays easy to handle between runs, and the battery delivers up to 10 minutes of driving time per charge. On a living room floor, a desk track or a small race setup, the Nano Racer format turns narrow spaces into usable circuits. Short driving sessions, quick charging through the controller and the compact footprint make this RC car a neat choice for spontaneous races, collecting and casual practice runs.

1:60 Nano Racer Aston Martin V12 Vantage RC car
1:60 Nano Racer Fo.Must.ShelbyGT500, RC car

Mini RC cars

1:60 Nano Racer Fo.Must.ShelbyGT500, RC car

500404334

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle car presence, and this 1:60 Nano Racer translates that character into a compact RC format. At 79 mm long, 33 mm wide and 22 mm high, the miniature car stays small enough for quick driving sessions on tables, smooth floors or improvised indoor courses while still carrying the licensed Ford look. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The 2.4 GHz radio system gives the car responsive control and allows up to 50 vehicles to run simultaneously, which suits group races without frequency clashes. A 15 m control range leaves room for short sprints, turns and head-to-head runs, while the 25 g weight keeps the handling light and agile. The remote control also serves as the charging point, so the battery can be charged directly through the controller. With up to 10 minutes driving time, the Nano Racer fits quick race breaks, compact home circuits and repeated short sessions where several cars share the same space. The small footprint and simple control layout also make it easy to set up spontaneous races whenever a smooth surface is available.

1:60 Nano Racer Fo.Must.ShelbyGT500, RC car
1:87 M-B Unimog U406, RC fire engine, RTR

RC models in 1:87 scale

1:87 M-B Unimog U406, RC fire engine, RTR

500504178

€109.99

The Mercedes-Benz Unimog U406 has long been known for compact utility and all-terrain presence, and this 1:87 RC fire engine translates that character into a format built for close-quarters driving. Fine printing, high-quality paintwork and front and rear LED lighting give the body a convincing emergency-service appearance, while the very small turning circle suits narrow routes between scenery, tools or display pieces. The chassis uses 2WD rear-wheel drive and a brushed motor for controlled running, with fully proportional steering and acceleration allowing measured inputs instead of simple on-off commands. That control layout makes a visible difference on a desk, in a diorama or anywhere space is limited, because the model can be guided through tighter lines with cleaner corrections. The 2.4 GHz system supports stable operation, and the permanently installed 3.7 V 75 mAh Li-ion drive battery keeps the compact body free from bulky battery changes. Charging takes place via the transmitter and takes around 30 minutes. As a 100% RTR version, the set arrives with the remote control, the drive battery and the batteries required for the transmitter. Up to 60 minutes of driving time supports longer indoor sessions, whether the model is weaving through a small layout, tracing service routes across a tabletop or adding movement to a scale scene.

1:87 M-B Unimog U406, RC fire engine, RTR
Eagle 280 Crash Stop, RC helicopter, 2.4G RTF

- 31 %

RC helicopters

Eagle 280 Crash Stop, RC helicopter, 2.4G RTF

500507169
€37.99

€54.99

The Eagle 280 Crash Stop brings compact RC helicopter flying together with a front crash-stop sensor that reacts to obstacles by stopping and backing the model away. At 200 mm long, 280 mm wide and 125 mm high, this 56 g coaxial helicopter suits controlled flights in tighter spaces as well as calm outdoor use. The 2.4 GHz control system gives the model its dedicated radio link, while the emergency stop button on the transmitter adds a direct way to cut the action when needed. A 3.7 V 250 mAh LiPo flight battery powers flights of up to 7 minutes, and the model reaches speeds of up to 25 km/h. The aluminium chassis gives the structure a firm core, and the coaxial rotor arrangement supports balanced lift for measured handling. Spare rotor blades are included, so the set is equipped for continued running after routine contact or wear. Indoor flights near walls, hallways or furniture benefit from the forward obstacle response, while open areas allow short hovering runs, lift-offs and landings with the same compact airframe. The ready-to-fly package includes the helicopter, remote control system, USB charger and transmitter batteries, so the set is prepared for flight after the first charging process.

Eagle 280 Crash Stop, RC helicopter, 2.4G RTF
RC Fire Boat 2.4G, RC boat, 100% RTR

- 21 %

RC speed boats

RC Fire Boat 2.4G, RC boat, 100% RTR

500108051
€94.99

€119.99

The RC Fire Boat 2.4G 100% RTR brings firefighting action onto the water with a remotely operated water cannon, LED position lights and a sporty rescue-boat look. At 560 mm long, 147 mm wide and 215 mm high, the hull has a strong on-water presence, while the 2.4 GHz radio system keeps control stable across distances up to 100 m. The fully assembled boat is supplied as a ready-to-run set with a 7.2 V 1000 mAh NiMH drive battery, USB charger, 2.4 GHz remote control and 2 x AA transmitter batteries. Full driving functions cover forwards, backwards, left and right, so manoeuvres can be varied between straight sprints, tight turns and controlled repositioning for water-cannon play. A driving time of 45 minutes supports longer sessions before recharging, and the boat weight of 717 g keeps the format easy to handle between shore and water. Whether used on a pond, at the lakeside or on calm stretches of water, the fireboat combines radio-controlled driving with an extra action feature that changes how each run unfolds. Age 8 years+ marks the recommended age, and the included screwdriver supports the setup of the supplied components before the next launch.

RC Fire Boat 2.4G, RC boat, 100% RTR
1:60 Nano Racer Aston Martin V12 Vantage, RC car

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage, RC car

500404339

€17.99

The Aston Martin V12 Vantage brings British sports car character into a 1:60 Nano Racer format, combining licensed body styling with compact RC handling. At 79 mm long, 33 mm wide and 22 mm high, the black coupe keeps a low, planted look that suits short sprints across tables, smooth floors and small driving spaces. Its 2.4 GHz radio system gives the model a dependable link to the controller across 15 m, and the layout also allows up to 50 vehicles to run at the same time. That makes the small scale especially lively in group sessions, where several cars can share the same area without constant frequency conflicts. The ready-to-run setup keeps the focus on driving, while the included 1.2 V 80 mAh NiMH drive battery matches the compact chassis and the 25 g weight for quick, light movement. Charging runs directly through the remote control unit, so the car and controller work as one neat driving system. With a maximum driving time of 10 minutes, the Nano Racer suits short races, repeat laps and quick head-to-head runs. Age 4+ is stated in the product data. The included screwdriver supports battery access as part of the set contents, and the compact format makes the model easy to store between sessions.

1:60 Nano Racer Aston Martin V12 Vantage, RC car
RC Yacht Hurikan, RC boat, 2.4 GHz RTR

RC speed boats

RC Yacht Hurikan, RC boat, 2.4 GHz RTR

500108059

€39.99

The Hurikan brings yacht styling and fast RC handling together in a compact 350 x 95 x 105 mm format built for lively water runs. Sand tones, white surfaces and dark window graphics give the hull a sharp, modern look, while the 2.4 GHz radio system keeps steering input responsive during laps across the lake. At 270 g, the model stays light in the hand for carrying to the shoreline, yet its twin-prop drive gives the boat the thrust needed for brisk acceleration on the water. Full driving functions cover forward, backward, left and right control, making tight turns and quick corrections easy to manage. The set includes a ready-to-run model, a 2.4 GHz remote control system, a USB charger, 2 x LR06 AA transmitter batteries and 2 spare propellers. The included 3.7 V 1200 mAh Li-Ion battery powers sessions of up to 40 minutes, and the drive engages only in water through the integrated shut-off circuit. That combination suits calm-lake outings, pond sessions and repeated practice runs where clean response matters as much as speed. Age 8+ marks the recommended age, and the complete RTR setup keeps the focus on steering lines, throttle control and fast passes across open water.

RC Yacht Hurikan, RC boat, 2.4 GHz RTR
1:24 Lamborghini Sian, RC car, 2.4GHz RTR

RC cars

1:24 Lamborghini Sian, RC car, 2.4GHz RTR

500404332

€24.99

The Lamborghini Sian brings super sports car styling into a compact 1:24 RC format, pairing a low, sharply shaped body with radio-controlled handling and a full ready-to-run setup. With a length of 195 mm, a width of 80 mm and a height of 49 mm, the model carries its proportions in a size that suits quick laps across smooth indoor surfaces. The 2.4 GHz remote control system supports stable command input during solo driving, while the 3.7 V Li-Ion drive battery with 500 mAh powers up to 60 minutes of ride time. At 172 g, the car stays light in hand and easy to place on the floor between runs. The included USB charger keeps the charging routine simple, and the set also contains 2 LR03 AAA transmitter batteries. A rear axle differential adds a mechanical detail that supports smoother cornering behaviour, while steering fine adjustment helps tune the driving line to the available space. LED lights at the front and rear keep the bodywork visible when the room gets darker and add extra presence during evening driving sessions. On a hallway course, around furniture legs or across a cleared living-room track, the compact dimensions, quick responses and detailed Lamborghini look create a focused RC session with a clear sports car character.

1:24 Lamborghini Sian, RC car, 2.4GHz RTR
1:60 Nano Racer Fo.Must.Shelby GT500, RC car

Mini RC cars

1:60 Nano Racer Fo.Must.Shelby GT500, RC car

500404335

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle-car presence, and this 1:60 Nano Racer translates that character into a compact RC format. With its licensed Ford design, red bodywork and stripe detailing, the small car brings a recognisable road-car silhouette to quick indoor driving sessions. The 2.4 GHz control system sends steering and throttle inputs over a range of 15 m, and it allows up to 50 vehicles to run simultaneously on the same frequency environment. Charging takes place through the remote control unit, which includes the charging connection for the 1.2 V 80 mAh NiMH drive battery. A full charge delivers up to 10 minutes of driving time. The ready-to-run format means the model, remote control with charging connection, NiMH drive battery, screwdriver and instructions are included. With dimensions of 79 x 33 x 22 mm and a weight of 25 g, the Nano Racer fits naturally into compact race setups where short straights, quick direction changes and close duels matter more than sheer size. The small scale also makes it easy to line up several cars for simultaneous runs, turning a table, hallway or smooth floor into a miniature racing scene with very little space required.

1:60 Nano Racer Fo.Must.Shelby GT500, RC car
1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz

RC models in 1:87 scale

1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz

500504175

€129.99

The Mercedes-Benz O 302 shaped coach travel across Europe for years, and this 1:87 RC bus brings that familiar silhouette into moving H0 scenes with licensed bodywork, raspberry red paintwork and front and rear LED lighting. At 112 mm long, 36 mm wide and 51 g in weight, the model sits naturally among buildings, platforms and road sections without overpowering the layout. Its 2WD rear-wheel drive works with a 2.4 GHz 3-channel radio system for controlled movement at up to 50 m, while the compact format helps the bus thread through tighter streets and station areas. The integrated 3.7 V Li-Ion battery with 75 mAh is built into the model, keeping the setup clean and the proportions true to scale. As a 100% RTR version, the set includes the remote control, the lithium drive battery, 4x AAA batteries, instructions and a storage case. The licensed Mercedes-Benz O 302 DB format gives the bus a recognisable road-going character that suits realistic transport scenes. On a model railway layout, the bus can roll between station forecourts, depot roads and town routes, adding controlled movement where static vehicles would otherwise remain fixed. The compact H0 scale format also suits shelf presentation between driving sessions, with the lighting and paintwork carrying the look of a classic DB bus into close-up display settings.

1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz
Easy Skydreamer, RC aircraft, 2.4 GHz RTF

RC aircraft

Easy Skydreamer, RC aircraft, 2.4 GHz RTF

500505035

€29.99

The Easy Skydreamer brings a compact flying-wing layout, twin propellers and 2.4 GHz control into a light RC aircraft that is built for straightforward handling in open-air flying sessions. At 240 mm long, 240 mm wide and just 20 g in weight, the airframe combines a small footprint with a notably light feel that suits quick launches and controlled passes. Its 6-axis gyroscope works continuously in the background to steady the model in flight, giving steering inputs a calmer, more predictable response than an unstabilised layout. The Flexipor airframe adds another concrete advantage: the material keeps the structure light while coping well with the bumps that can come with early practice flights. Twin rear-mounted propellers support the aircraft's powered flight concept, and the included 3.7 V 150 mAh LiPo flight battery supplies up to 15 minutes of runtime per charge. The set is configured as 100% Ready to Run, so the core flying hardware is already matched for use. Included in the set are the flight-ready model, the remote control, the LiPo flight battery, a USB charger, 2 x LR06 transmitter batteries and 2 spare propellers. With its stabilised control concept and low 20 g weight, the Easy Skydreamer suits park flights, first RC take-offs and short practice sessions focused on smooth turns, level passes and repeatable landings.

Easy Skydreamer, RC aircraft, 2.4 GHz RTF
Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF

RC helicopters

Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF

500507132

€29.99

The Easy Tyrann 200 Boost IR brings compact indoor helicopter flying into a 100% RTF format with a 240 mm body, 200 mm rotor diameter and a 3-channel infrared control system. Its gyro-supported flight stabiliser helps keep the model composed in the air, while the switchable boost function adds an extra burst of power when the pace needs to change. A 3.7 V LiPo flight battery with 250 mAh capacity powers flight times of up to 9 minutes, and charging runs through the included USB charger. The transmitter also controls the color changing LED, so the light effect can be switched during flight rather than staying fixed. With a top speed of 15 km/h and a flight weight of 31 g, the helicopter stays light enough for controlled indoor use while still delivering lively movement. The ready-to-fly set includes the model, IR remote control system, LiPo flight battery, USB charger, 3x LR06/AAA transmitter batteries and spare rotor blades. Short hovering runs in a living room, careful turns along a hallway or repeated take-offs and landings on a smooth floor all suit the compact format. Age 8 Years+

Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF
Sea Ray 2.4 GHz, RC boat, 100% RTR

RC speed boats

Sea Ray 2.4 GHz, RC boat, 100% RTR

500108063

€54.99

The Sea Ray 2.4 GHz brings twin 380 brushed motors, a streamlined hull and RTR convenience together in a compact RC boat built for fast action on the water. At 395 mm long, 190 mm wide and 100 mm high, it cuts a neat profile across ponds and calm lakes, with LED lighting adding a clear visual accent as the hull moves through changing light. The fully assembled format keeps the focus on driving rather than setup, and the included 7.4 V 600 mAh Li-Ion battery supports up to 20 minutes of running time per charge. A charging time of 3 hours keeps the routine straightforward between sessions. The 2.4 GHz radio system is designed for 1 player control, while the water-protected receiver and battery box help keep key electronics covered from spray. A built-in shut-off means the motors only run in water, matching the boat's intended use with a clear functional safeguard. Its lightweight 349 g build makes carrying the model from bag to bank easy, and the compact shape sits comfortably in hand at launch and recovery. With 2 AA transmitter batteries included, the set is ready for immediate use in suitable water conditions, whether the plan is short speed runs, repeated passes along the shoreline or relaxed practice with steering and throttle control.

Sea Ray 2.4 GHz, RC boat, 100% RTR
1:12 MB Unimog U300, RC truck, 100% RTR

- 50 %

Models & trailers

1:12 MB Unimog U300, RC truck, 100% RTR

500907721
€99.99

€199.99

The MB Unimog U300 has long been known as a compact utility truck with strong off-road credentials, and this 1:12 RC version carries that working character into a fire brigade layout with covered rear bed, roof beacons and front LED lighting. At 450 mm long, 220 mm wide and 260 mm high, the model brings a substantial road presence while staying manageable for regular driving sessions. The fully assembled chassis is ready to run with a powerful electric motor, digital proportional control and a 2.4 GHz remote control unit. Steering and throttle inputs can be adjusted progressively, which gives the truck a more controlled feel than simple on or off commands when lining up turns or easing over rougher ground. The included 7.4 V 850 mAh Li-Ion drive battery supplies up to 60 minutes of driving time, and a USB charger is part of the set. Horn and motor sound can be triggered from the transmitter, adding another layer of interaction during runs. With a vehicle weight of 2052 g, the model has enough substance to suit its utility-truck character. Fire brigade markings, the covered cargo area and the upright Unimog proportions make this RC truck fit naturally into rescue-themed driving scenes, yard layouts or obstacle courses with gravel, paving and mixed surfaces. The included transmitter batteries complete the 100% RTR setup, so the model can head straight into its first run after charging.

1:12 MB Unimog U300, RC truck, 100% RTR
1:50 Nano City Dump Truck, RC truck, 2.4 GHz

Mini RC cars

1:50 Nano City Dump Truck, RC truck, 2.4 GHz

500907684

€18.99

Construction trucks have long shaped city streets and building sites with their compact strength and unmistakable working profile. The 1:50 Nano City Dump Truck brings that familiar form into a small RC format with a true-to-original design, a detailed driver's cab and a ready-to-run setup for immediate use. Its fully assembled layout keeps the focus on driving, while the 146 g weight and 135 mm length create a handy format for controlled manoeuvres on tables, floors or improvised indoor routes. The open dump body gives the model its recognisable utility-truck silhouette, and the non-slip rubber tires provide the grip needed for cleaner starts, tighter turns and steadier movement on smooth surfaces. The 2-channel 2.4 GHz radio system supports interference-free control, which is especially useful when several radio-controlled models are active nearby. LED lighting adds another working-vehicle detail and makes the truck easier to track when the route runs through dimmer corners. Included in the set are the ready-to-run model, a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery, a USB charger and instructions. With up to 40 minutes of travel time, the compact dump truck suits quick driving sessions, small construction-themed layouts and repeated laps through indoor obstacle courses.

1:50 Nano City Dump Truck, RC truck, 2.4 GHz
1:87 M-B Unimog U406, RC truck, 100% RTR

RC models in 1:87 scale

1:87 M-B Unimog U406, RC truck, 100% RTR

500504177

€114.99

The Mercedes-Benz Unimog U406 has long stood for compact utility vehicle engineering, and this 1:87 RC version carries that character into a small-format driving model with a matching trailer. In bright orange with detailed paintwork and precise printing, the Unimog combines a true-to-original look with compact radio-control technology for controlled runs across a desk layout, a diorama road or a small indoor course. The 2.4 GHz remote control is part of the 100% RTR setup, so the model arrives with the core driving equipment already matched to the vehicle. Front and rear LEDs work alongside the switchable warning light to sharpen the service-vehicle appearance during operation. Steering trim on the transmitter helps fine-tune straight running, which is especially useful at 1:87 scale where small corrections show clearly. The permanently installed Li-Ion battery is rated at 3.7 V and 75 mAh, and the set also includes the required transmitter batteries plus a storage case for transport and tidy shelf keeping. The trailer broadens the operating scene beyond simple laps, with a tilting bed and removable tarpaulin that suit loading and unloading setups in miniature worksite or farm-style layouts. With age recommendation 14 years and up, the model fits hobby sessions focused on compact manoeuvres, display layouts and detailed vehicle handling in limited space.

1:87 M-B Unimog U406, RC truck, 100% RTR
1:87 VW T1 SambaBus, RC car, 2.4GHz RTR

- 25 %

RC models in 1:87 scale

1:87 VW T1 SambaBus, RC car, 2.4GHz RTR

500504164
€89.99

€119.99

The VW T1 SambaBus with trailer brings classic touring style into compact RC form at 1:87 scale. The ready-assembled set pairs the iconic bus silhouette with a matching caravan, while front and rear LED lights add visible presence during each run. A 2.4 GHz remote control system handles the model with fully proportional inputs, so throttle and steering respond in fine steps rather than simple on or off commands. Steering trim helps keep the vehicle tracking cleanly, especially on narrow routes and detailed miniature layouts. The 3.7 V 75 mAh Li-Ion drive battery supplies the power, and the transmitter also serves as the charging connection with a 60 minute charge time. The compact format and very small turning radius suit controlled driving in limited space where broader models would need more room. The combination of SambaBus and caravan creates a distinctive road-trip scene for shelf display, diorama use or active driving sessions. Included in the set are the ready-to-run model, the 2.4 GHz remote control system, the Li-Ion drive battery and 4 AAA transmitter batteries, so the model is equipped for use straight from the set.  Warning! Not suitable for children under 14 years.

1:87 VW T1 SambaBus, RC car, 2.4GHz RTR
Bella Luisa 2.4G, RC boat, 100% RTR

RC yachts

Bella Luisa 2.4G, RC boat, 100% RTR

500108055

€69.99

Classic runabout styling meets radio-controlled action in the Bella Luisa 2.4G 100% RTR. The 455 mm motorboat combines a glossy wood-look finish, a clear curved windshield and chrome-look deck details with full steering control, creating a striking presence on ponds and small lakes. The hull measures 455 x 105 x 140 mm and weighs 648 g, giving the boat a slim, low profile on the water. Inside the set are a 2.4 GHz transmitter, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA transmitter batteries, so the model is fully assembled and ready for operation. The propeller drive reaches up to 10 km/h, while the water-activated motor start means the propeller engages only when the boat is on the surface. The detailed fairing and driver's cabin shape add to the leisure-boat look, and the cockpit area offers space for a play figure. On a calm garden pond, the responsive left-right and forward-reverse controls support neat manoeuvres along the bank or broad passes across open water. A driving time of up to 25 minutes leaves room for longer sessions before the battery returns to the USB charger.

Bella Luisa 2.4G, RC boat, 100% RTR
1:10 Bokusa BL 2S 4WD RTR, RC car, yellow

RC truggies & RC monster trucks

1:10 Bokusa BL 2S 4WD RTR, RC car, yellow

500404321

€219.99

The 1:10 Bokusa BL 2S 4WD RTR brings brushless power and monster truck stance into a ready-to-run RC car built for fast off-road sessions. Its 455 x 312 x 180 mm format and 2165 g weight give the chassis a planted footprint, while the yellow body adds a bold trackside look. A 30 kg waterproof steering servo with metal gears handles steering input with firm control, and the fully ball bearing mounted transmission supports efficient running across the drivetrain. Metal differentials at the front and rear use steel bevel gears, adding a solid mechanical base for repeated acceleration and braking. The 2.4 GHz remote control system is included, and the radio system is water-protected for running in changing ground conditions. An XT90 high-voltage battery connector system and a quick-change battery mount keep battery swaps straightforward between sessions. With a stated runtime of up to 15 minutes, the model suits short, fast runs on dirt, gravel and uneven surfaces where suspension travel and tyre grip can be used fully. Age 14 Years. A battery is required separately.  Warning! Not suitable for children under 14 years.

1:10 Bokusa BL 2S 4WD RTR, RC car, yellow
1:10 XS Tekuro, RC car, 100% RTR 4WD

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 100% RTR 4WD

500404361

€199.99

The 1:10 XS Tekuro brings a fast off-road setup into a ready-to-run format, combining permanent 4WD, a high-torque 550 brushed motor and up to 40 km/h for lively runs across dirt, gravel and rough ground. At 410 mm long, 300 mm wide and 175 mm high, the chassis carries a broad monster-truck stance that suits uneven terrain and quick direction changes. Completely mounted on ball bearings, the drivetrain is built to reduce drag through the transmission, while metal differentials at the front and rear use steel bevel gears for direct power transfer under load. The XT60 high-voltage battery plug-in system supports a secure connection for the included 7.4 V 2600 mAh Li-Ion battery pack, and the quick-change battery holder keeps swaps straightforward between sessions. Weight comes in at 1741 g, giving the chassis enough mass to stay settled as the suspension works through bumps. The rear bumper integrates a wheelie bar that supports controlled lift when the motor loads up hard from a standing start. The scope of delivery includes the 100% RTR model, 2.4 GHz remote control system, 2600 mAh 7.4 V drive battery, 1 A USB charger, 4 LR06 AA transmitter batteries and a manual. Driving time is about 15 minutes, making the XS Tekuro a strong fit for park runs, compact off-road tracks and loose-surface sessions where quick setup and solid traction matter.  Warning! Not suitable for children under 14 years.

1:10 XS Tekuro, RC car, 100% RTR 4WD
1:12 Glow Rider, RC buggy, 2.4 GHz RTR

RC cars

1:12 Glow Rider, RC buggy, 2.4 GHz RTR

500404299

€54.99

The Glow Rider brings 1:12 RC buggy action together with vivid LED lighting, creating a strong visual presence when the track gets darker and the body starts to glow in motion. At 340 x 215 x 123 mm and 570 g, the model combines a compact footprint with a planted off-road stance that suits quick direction changes and fast evening runs. The 2.4 GHz control system supports multiplayer driving without the close-range interference common to older frequency setups, which helps keep each buggy responsive during shared sessions. Full suspension works beneath the low body shell to absorb uneven ground and keep steering inputs more consistent over rougher surfaces. Grippy off-road tyres add traction where loose dirt, gravel or short grass would unsettle a road-focused setup. The ready-to-run package includes the assembled model, a Li-Ion drive battery, a USB charger and 2 AA transmitter batteries, so the full driving setup is in the box from the start. Age recommendation: 8 years and up. A paved yard at dusk, a compact dirt section in the park or a smooth evening track all suit the Glow Rider well, especially when the illuminated body can stand out against lower light. Up to 25 minutes of driving time at full capacity gives each session enough length for repeated laps, quick races and steady practice with throttle and steering control.

1:12 Glow Rider, RC buggy, 2.4 GHz RTR
1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR

RC cars

1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR

500404351

€54.99

The Lamborghini Murcielago SV translates the dramatic lines of the full-sized supercar into a 1:14 RC model with compact road presence and strong visual detail. At 330 mm long, 145 mm wide and 80 mm high, the body carries opening doors and a lifting hood that add hands-on interaction beyond pure driving. The detailed interior gives the cabin more depth when the body is viewed up close, while the front and rear LED system keeps the silhouette readable in lower light. A differential gear manages the drive effect between the wheels during turns, which helps the model hold a cleaner line through changing corners. Fully sprung suspension adds another mechanical layer, allowing the chassis to settle more evenly as the surface changes. The model weighs 631 g, giving it a planted feel in motion without losing the agile character expected from this scale. The fully assembled 100% RTR format keeps the focus on driving rather than setup, with a 2.4 GHz remote control unit included in the set. Also included are the 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR06 batteries. Driving time reaches up to 25 minutes, making the model well suited to repeated laps, short handling sessions and display breaks between runs.

1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR
1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor

RC tractors

1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor

500907704

€84.99

The DEUTZ-FAHR 8280 TTV is recreated here as a 1:16 RC tractor with a detailed body, realistic driving functions and a strong farm vehicle presence. At 400 mm long, 180 mm wide and 234 mm high, the model carries the proportions of the original into a format that suits both active driving and shelf display. The ready-to-run set includes the tractor, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 transmitter batteries. Engine sound and horn add direct control inputs beyond steering and throttle, giving each run a more lifelike operating feel. The licensed DEUTZ-FAHR design is supported by cab details, body shaping and the characteristic tractor layout. With 5 frequency channels, the radio system provides stable control for solo driving sessions. Driving time reaches up to 90 minutes, allowing longer runs before recharging. On the floor at home, along a garden path or across lightly uneven ground, the compact dimensions and rigid axle help the tractor stay composed as it changes direction and tracks through tighter sections. Age 8 years+ marks the recommended age for use.

1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor
1:16 Volvo EC 160E, RC excavator, 100% RTR

RC diggers

1:16 Volvo EC 160E, RC excavator, 100% RTR

500907694

€199.99

The Volvo EC 160E brings excavator handling into 1:16 scale with a ready-to-run RC setup, a true-to-original driver's cab and a working crawler layout built around 2 separately driven chains. With an operating weight of 2354 g and dimensions of 252 x 168 x 180 mm, the model carries a substantial presence while remaining manageable for controlled indoor driving and digging sessions. Its function package focuses on coordinated arm work rather than simple forward travel. The lifting arm and stick are made of plastic, and the spindle drive system moves the lifting arm, stick and bucket through deliberate, mechanical action that suits loading, lifting and placement tasks. The 2.4 GHz radio system supports single-user control, and the maximum operating time of up to 190 minutes allows longer work cycles before recharging. The included sheet metal shovel, scrap grab and excavator chisel shift the machine from earthmoving to gripping and breaking scenarios without changing the core vehicle. On a floor-based building site layout, the excavator can turn the uppercarriage through 360° to pick up, swing and place material within a compact work zone. The RTR package includes the model, remote control system, 7.4 V 1200 mAh Li-Ion drive battery, 3 LR06/AA transmitter batteries and instructions.  Warning! Not suitable for children under 14 years.

1:16 Volvo EC 160E, RC excavator, 100% RTR
1:8 Drakuro BL 3S 4WD RTR, RC car

RC buggys

1:8 Drakuro BL 3S 4WD RTR, RC car

500409096

€299.99

The 1:8 Drakuro BL 3S 4WD RTR brings brushless power, long-travel suspension, and a wide off-road stance into a ready-to-run RC car built for fast runs across mixed terrain. With a length of 500 mm, width of 370 mm, height of 330 mm, and weight of 3402 g, the chassis carries the planted footprint needed for high-speed driving and rough-surface control. A waterproof 30 kg steering servo with metal gears gives the front axle the force needed for direct steering inputs, while splash-proof electronics and housing support running where dust, spray, and loose dirt are part of the session. Steel differentials at the front and rear distribute drive through the drivetrain, and height-adjustable body mounts allow the shell position to be matched to the setup. The XT90 high-current connector system is designed for low-loss power transmission, supporting the demands of the brushless drive package under load. LED lighting at the front, rear, and roof keeps the body easy to track as conditions darken, and the rear bumper integrates a wheelie bar for hard launches under strong acceleration. The ready-to-run set includes a 2.4 GHz remote control and instructions. 14 Years marks the recommended age.  Warning! Not suitable for children under 14 years.

1:8 Drakuro BL 3S 4WD RTR, RC car
1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR

- 24 %

RC models in 1:87 scale

1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR

500504147
€79.99

€104.99

Few cars carry the visual identity of the Volkswagen Beetle as clearly as this 1:87 RC version in red. The rounded body shape, detailed paintwork and decoration, and illuminated front and rear LED lights bring the classic silhouette into motion on a compact scale. The ready-to-run set includes the assembled model, a 2.4 GHz remote control system, a 3.7 V 40 mAh Li-Ion drive battery and 4 AAA transmitter batteries. Fully proportional control allows measured throttle and steering inputs instead of simple on-off commands, which gives the small chassis a more precise feel in confined spaces. Steering trim on the transmitter supports straight tracking when fine corrections are needed. The transmitter also handles charging, with a 45-minute quick-charge time matched by a driving time of up to 45 minutes. A storage showcase is included for keeping the model protected between runs. With its very small turning radius, the miniature Beetle suits short indoor routes, desk-side driving and detailed diorama settings where tighter corners matter. The 1:87 scale also makes it a strong fit for collectors and model-layout enthusiasts who want a drivable classic car with compact dimensions and a finished RTR setup.

1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR
1:87 VW T1 Pritsche, RC car, green trailer

RC models in 1:87 scale

1:87 VW T1 Pritsche, RC car, green trailer

500504179

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 RC version captures that familiar silhouette in a compact format with a green car trailer behind it. The radio-controlled layout turns the classic VW T1 Pritsche into a moving scale model that combines display character with active handling on a small footprint. Its 1:87 scale makes the model easy to place on layouts, shelves, or desks where larger vehicles would need far more room, while the trailer adds a second visual element that extends the transporter theme beyond the cab itself. The green finish gives the combination a clear, period-inspired presence, and the Pritsche body style keeps the utility look of the original vehicle at the centre of the design. As a powered ground vehicle, it brings motion to a format often chosen for static collecting, which changes how the model can be used between display moments and controlled runs. 5 batteries are included. The age marking is 14 Years. The compact dimensions implied by 1:87 scale suit short driving sessions on smooth indoor surfaces, model layouts, or table-based scenes where precise movement matters more than outright speed. It also fits neatly into collections built around classic transport themes, especially where a trailer combination adds extra visual interest without taking over the whole scene.

1:87 VW T1 Pritsche, RC car, green trailer
Cyber Drone Polizei, quadcopter, 2.4G RTF

RC quadcopters

Cyber Drone Polizei, quadcopter, 2.4G RTF

500507186

€34.99

The Cyber Drone Polizei 2.4G 100% RTF brings compact quadcopter flying into a ready-to-fly format with a 2.4 GHz remote control, a 3.7 V 600 mAh LiPo battery and a USB charger. With a length of 125 mm, a width of 135 mm, a diameter of 150 mm and a rotor diameter of 45 mm, the layout stays light at 50 g ascent weight and suits quick take-offs in smaller open spaces. Its control setup combines several functions that shape how the model behaves in the air. The 8 minute flight time supports short, focused rounds, while the included transmitter power uses 3 AAA batteries. The headless mode changes orientation handling by referencing the control direction rather than the nose position, which helps keep steering inputs easier to read during turns. Trim adjustment for left and right flight allows finer correction when the quadcopter drifts off line. Blue and red flashing LEDs remain easy to spot once the model lifts away from the launch point. Ready-to-fly equipment keeps the set focused on getting airborne with minimal preparation, whether the session starts on a driveway, in a yard or across a calm section of park ground. The compact dimensions, return function and selectable speed levels make it easy to alternate between steady hovering, directional practice and quick stunt passes in the same outing.

Cyber Drone Polizei, quadcopter, 2.4G RTF
Magic Machine 2.0, RC car, 2.4 GHz RTR

RC cars

Magic Machine 2.0, RC car, 2.4 GHz RTR

500404325

€49.99

The Magic Machine 2.0 brings a striking twist to RC driving with a body that changes function at the touch of a button. In one moment it runs as a flat racer, and in the next it shifts into an off-road configuration with more ground clearance, creating a fast change of character on asphalt, ramps and rougher sections. Its layout combines separately steered front and rear units with all-wheel drive, so both axles work together as the vehicle changes direction. That unusual steering concept gives the model its own driving feel and supports quick reactions when obstacles appear in the path. The body design also allows the machine to flip backward over obstacles, continue driving on its back and right itself again to keep moving. LED lighting adds another visible detail during use, while the contrasting top and bottom styling makes each rollover part of the visual effect rather than a stop in the action. With a length of 340 mm, a width of 215 mm and a height of 123 mm, the model has a compact footprint matched by a weight of 570 g. The included Li-Ion drive battery delivers up to 25 minutes of driving time and is paired with a USB charger. A 2.4 GHz remote control in a game controller style is included, along with 2 AA transmitter batteries, so the ready-to-run set is equipped for immediate use after charging.

Magic Machine 2.0, RC car, 2.4 GHz RTR
Stinger 2.0 2.4GHz 100% RTF, RC airplane

RC aircraft

Stinger 2.0 2.4GHz 100% RTF, RC airplane

500505038

€49.99

The Stinger 2.0 2.4GHz 100% RTF brings a light 29 g airframe, intelligent gyro electronics and a ready-to-fly setup into one compact RC airplane built for controlled first flights and relaxed repeat sessions. With a length of 315 mm and a width of 385 mm, the model carries a broad wing layout that gives the aircraft a clear presence in the air while keeping the format easy to transport to open flying spaces. The Flexipor construction keeps weight low and supports the light handling that suits this class, while the 2.4 GHz control system allows clean command input without cable setup. A 3.7 V 300 mAh LiPo battery powers the airplane, and charging runs through the included USB charger. Spare rotor blades are included for continued use after routine wear, and the included 2x AA batteries complete the transmitter power supply. The gyro system works with the control inputs to calm the model in flight, which helps maintain a steadier line during climbs, gentle turns and landing approaches. Open ground, a sports field or another suitable flying area gives the 385 mm wingspan room to work through smooth passes and repeated take-offs. The ready-to-fly format keeps preparation focused on charging, switching on and heading into the next 20-minute flying session.

Stinger 2.0 2.4GHz 100% RTF, RC airplane
1:10 Bokusa BL 2S, RC car, 4WD RTR

RC truggies & RC monster trucks

1:10 Bokusa BL 2S, RC car, 4WD RTR

500404320

€219.99

The 1:10 Bokusa BL 2S brings brushless power, 4WD traction and RTR convenience into a 455 mm off-road machine built for fast, dirt-focused running. With a width of 312 mm, a height of 180 mm and a weight of 2165 g, the chassis carries a broad, planted stance that suits rough ground and quick direction changes. Metal differentials at the front and rear use steel bevel gears to distribute drive across the axle line, while the fully ball bearing mounted transmission supports efficient running through the drivetrain. A 30 kg waterproof steering servo with metal gears gives the front end firm steering authority in wet or dusty conditions, and the water-protected 2.4 GHz remote control system keeps control input stable during outdoor sessions. The XT90 high-voltage battery connector system is paired with a quick-change battery mount, so battery swaps stay straightforward between runs. Age recommendation: 14 years and over. As an RTR model, the Bokusa BL 2S is set up for immediate driving once the required power source is added. Gravel tracks, compacted dirt and uneven open ground suit the suspension layout and tyre format especially well, while repeated acceleration runs benefit from the wheelie bar at the rear. Batteries are required separately.  Warning! Not suitable for children under 14 years.

1:10 Bokusa BL 2S, RC car, 4WD RTR
1:10 XS Ryken, RC buggy, 100% RTR 4WD

RC truggies & RC monster trucks

1:10 XS Ryken, RC buggy, 100% RTR 4WD

500404363

€199.99

The 1:10 XS Ryken brings fast off-road running into a compact RTR format, pairing a 550 brushed motor with permanent 4WD for direct launches and steady pull across mixed terrain. At 410 x 300 x 175 mm and 1741 g, the buggy carries a broad, planted stance that suits dirt tracks, gravel paths and uneven ground. Power reaches the wheels through hardened steel drive shafts and a central steel cardan shaft, while front and rear metal differentials with sealed steel bevel gears keep the drivetrain precise under load. A chassis mounted on ball bearings supports efficient running, and the splashproof housing and electronics keep light rain and wet ground from stopping the session. The rear wheelie function uses targeted torque and traction control to lift the front end under acceleration, adding a distinct driving character beyond straight-line speed. A rear spoiler and rollover cage complete the body with added protection for the shell and electronics during tip-overs. The 100% RTR setup arrives pre-assembled with a 2.4 GHz remote control system, a 7.4 V 2600 mAh drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. That makes the XS Ryken ready for immediate running on open ground, from compact backyard courses to rougher off-road stretches where grip, suspension travel and drivetrain control all come into play.  Warning! Not suitable for children under 14 years.

1:10 XS Ryken, RC buggy, 100% RTR 4WD
1:10 XS Ryken, RC car, 100% RTR 4WD blue

RC truggies & RC monster trucks

1:10 XS Ryken, RC car, 100% RTR 4WD blue

500404362

€199.99

The 1:10 XS Ryken brings off-road action into a 410 mm long RC car with a wide 300 mm stance, 175 mm height and a ready-to-run setup built for immediate driving. Its blue body sits over a layout tuned for rough ground, where the combination of 4WD and generous clearance gives the chassis the grip needed for loose tracks, uneven paths and dusty sections. Power comes from a 550 brushed motor paired with a 7.4 V 2600 mAh Li-Ion drive battery, delivering up to 40 km/h and around 12 minutes of driving time. The hardened steel drive shafts transfer power with minimal play, while the sealed steel differential gears support clean, direct drivetrain response when dirt and vibration build up. The integrated wheelie function adds a distinct handling character by managing torque and traction so the front end can rise under acceleration. Oil-damped suspension helps the car settle after bumps and keeps the tyres working across broken surfaces. As a 100% RTR model, the set includes the ready-to-run vehicle, a 2.4 GHz remote control system, the drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. With a weight of 1741 g, the chassis carries enough presence for stable running on open ground, gravel stretches and wet outdoor surfaces where splashproof electronics matter.  Warning! Not suitable for children under 14 years.

1:10 XS Ryken, RC car, 100% RTR 4WD blue
1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR

RC models in 1:87 scale

1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR

500504148

€114.99

The Volkswagen Beetle became one of the most recognisable car shapes of the 20th century, and this 1:87 RC version pairs that silhouette with a matching trailer for a compact driving set with strong period character. Detailed paintwork and decoration, front and rear LED lights, and the rounded body lines give the miniature a clear display presence even when parked between runs. Its 2.4 GHz radio system uses fully proportional control, so steering and throttle inputs can be adjusted smoothly instead of switching only between stop and full power. Steering trim helps fine-tune straight running, and the very small turning radius suits narrow routes on desks, shelves or indoor floors where larger RC models need more space. The included 3.7 V 40 mAh Li-Ion drive battery keeps the format compact, and the transmitter handles charging in 45 minutes. A storage showcase is included for presentation between driving sessions, and the set is marked 14+. The trailer adds a second moving element to the setup, changing the handling feel as the Beetle pulls a compact load through bends and turnarounds. Short evening runs, shelf display, or a small tabletop course all suit the 1:87 format, with the illuminated front and rear sections staying easy to spot as the model moves through tighter spaces.  Warning! Not suitable for children under 14 years.

1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR
Cyber Drone IR RTF, quadcopter, 360° flips

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

500507188

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a nimble 125 mm x 135 mm format with a 150 mm diameter and a 45 mm rotor diameter. A button-triggered 360° flip function adds fast aerial action, while the Coming Home function returns the quadcopter to its home point at the touch of a button, creating a clear, easy rhythm between short flights and recovery. Its 3.7 V/600 mAh LiPo flight battery supports up to 8 minutes of flight time, and the 50 g ascent weight keeps the model light in the air. The IR control concept is paired with 3 speed settings, so the handling can stay measured for early practice or become more lively for tighter reactions. Blue LED lighting adds clear visual orientation once the quadcopter lifts off, especially when the frame is moving quickly through flips, turns and short climbs. The green finish gives the model a bright, high-contrast look in motion. Short sessions in the living room, open indoor areas or calm practice runs with repeated take-offs and landings all suit this ready-to-fly setup. Included contents are the ready-to-fly model, IR remote control, LiPo flight battery 3.7 V/600 mAh, USB charger and instruction manual.

Cyber Drone IR RTF, quadcopter, 360° flips
Italeri B.M.W. 320 Gr. 5 Model Kit 1:24

Model car kit

Italeri B.M.W. 320 Gr. 5 Model Kit 1:24

510003626

€36.99

The Italeri B.M.W. 320 Gr. 5 model kit in 1:24 scale brings a landmark touring car racer onto the workbench with the broad-shouldered Group 5 silhouette, race number 57 and the vivid 1978 DRM Norisring livery. As the build takes shape, the E21-based body, large fenders and rear wing give the car its unmistakable circuit stance. This assembly kit draws on the competition version developed after the FIA introduced the Group 5 rules in 1976 for special production cars. The real car used a new aerodynamic profile and a 300 hp engine, and that racing character carries through the model's proportions and surface details. Separate parts on black sprues form the chassis tub, suspension elements, cockpit fittings and exterior sections, so the structure develops in clear stages. The decal sheet goes beyond body graphics with driver identification, instrument faces and mechanical markings that sharpen the finished presentation. Assembly is required, with a stated build time of 600 minutes. On a hobby desk, the 1:24 scale supports careful painting, decal placement and final body fitment without crowding fine details. Once completed, the B.M.W. 320 Gr. 5 suits shelf display, diorama use or a line-up with other classic circuit racers from the same era.

Italeri B.M.W. 320 Gr. 5 Model Kit 1:24
RC Boot Rescue 2.4G, RC boat, ready to run

RC speed boats

RC Boot Rescue 2.4G, RC boat, ready to run

500108058

€39.99

The RC Boot Rescue 2.4G brings rescue-boat styling and quick radio-controlled handling together in a compact 350 mm format. The red and yellow hull, raised cabin and roof light details create a clear emergency-service look on the water, while the 2.4 GHz control system keeps commands responsive during fast passes and tighter steering inputs. At 95 mm wide and 105 mm high, the boat combines a slim profile with a stable stance for controlled manoeuvres. Forward, backward, left and right control allows precise handling around pool edges, small obstacles and turning points. The fully assembled model comes as a ready-to-run set with remote control, a 3.7 V 1200 mAh Li-Ion battery, a USB charger and 2 x LR06 AA transmitter batteries. With a weight of 270 g, the hull stays easy to carry to the water and simple to set down for the next run. The water-activated circuit keeps the drive inactive on land and switches operation on only in water. Up to 40 minutes of running time supports longer sessions at the pond or in a larger pool, and the 2 spare propellers add a practical replacement set for regular use. Age recommendation: 8 years+

RC Boot Rescue 2.4G, RC boat, ready to run
1:10 Cage Fighter, RC buggy, 2.4GHz RTR

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

500404302

€74.99

The 1:10 Cage Fighter brings desert buggy styling, radio-controlled handling and ready-to-run convenience into one fast-moving off-road setup. As a fully assembled RC buggy with 2.4 GHz control, it heads straight into dirt tracks, packed gravel and open ground with a low barrier to entry and a focused motorsport feel. Its full suspension supports precise steering response when the surface turns uneven, while the grippy off-road tyres help the buggy hold traction across changing terrain. Solid bumpers at the front and rear add protection in the zones that take the hardest knocks during close running. At 436 mm long, 234 mm wide and 147 mm high, the chassis has a planted footprint that suits outdoor driving, and the 806 g weight keeps the model agile in direction changes. The included Li-Ion drive battery runs at 7.4 V with 500 mAh capacity, and the set also includes a USB charger, a 2.4 GHz remote control and 2 x LR06/AA transmitter batteries. Top speeds of up to 18 km/h add a brisk pace without pushing the model beyond approachable control. Whether the route runs over compacted soil, short grass or rougher backyard ground, the Cage Fighter is built for active RC sessions rather than shelf display. Age 8+ marks the recommended age, and the 100% RTR format keeps the focus on charging the battery, taking the controller in hand and getting the buggy moving.

1:10 Cage Fighter, RC buggy, 2.4GHz RTR
1:10 Cage Fighter, RC buggy, 2.4GHz RTR

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

500404303

€74.99

The 1:10 Cage Fighter brings fast off-road RC action into a ready-to-run format with a fully assembled chassis, 2.4 GHz radio control and a 7.4 V 500 mAh Li-Ion drive battery. At 436 mm long, 234 mm wide and 147 mm high, the buggy cuts a planted stance as it charges over dirt, gravel and uneven ground. Its full suspension helps the wheels stay in contact with the surface, so steering inputs translate into cleaner direction changes instead of skittish bouncing. The 806 g vehicle weight supports an agile feel without losing presence on the track. Front and rear bumpers frame the chassis with added protection in the zones that meet obstacles first, which suits repeated running in tighter spaces and rougher outdoor sections. The included USB charger keeps the battery routine straightforward, and the supplied 2 x LR06 AA transmitter batteries complete the set. With a driving time of 25 minutes and speeds of up to 19 km/h, the Cage Fighter suits short backyard sessions, improvised dirt courses and casual head-to-head runs with other 2.4 GHz models. Age 8+ is stated for this RC buggy, making it a strong entry point into radio-controlled driving while still offering enough pace and control to stay engaging beyond the first outings.

1:10 Cage Fighter, RC buggy, 2.4GHz RTR
1:10 Night Racer 2.0, RC car, 2.4GHz RTR

- 33 %

RC cars

1:10 Night Racer 2.0, RC car, 2.4GHz RTR

500404249
€49.99

€74.99

The Night Racer 2.0 brings low-slung on-road styling and ready-to-run RC action into one focused 1:10 setup, with a 2.4 GHz control system and a top speed of 20 km/h shaping fast laps on smooth ground. At 485 mm long, 200 mm wide and 125 mm high, the body cuts a sharp racing silhouette that stands out in motion and under evening light. A 260 mm wheelbase and a weight of 737 g give the chassis a balanced footprint for quick steering inputs and stable tracking through linked corners. The differential transmission helps the driven axle work cleanly when the car changes direction, while the suspension layout keeps the wheels in contact over uneven patches and transitions. The included 7.4 V 1200 mAh Li-Ion drive battery supports up to 40 minutes of driving time, and the USB charger keeps the running gear simple to prepare between sessions. Detailed paintwork adds a finished motorsport look, and the blue illuminated rim design sharpens the visual effect once the light drops. On a driveway, in a car park or across a smooth indoor surface, the RTR setup gets the car moving with the supplied remote control system and included transmitter batteries. The compact racing profile, quick response and illuminated wheel styling suit short speed runs, repeated corner practice and evening cruising alike.

1:10 Night Racer 2.0, RC car, 2.4GHz RTR
1:12 RaceRival Combo, RC car, 2.4G RTR

RC cars

1:12 RaceRival Combo, RC car, 2.4G RTR

500404297

€59.99

The 1:12 RaceRival Combo brings 2 fully assembled RC cars into one set, creating instant side-by-side racing with matching 2.4 GHz radio control. Each model measures 304 mm in length and uses a 3.7 V Li-Ion drive battery with 500 mAh capacity, giving the pair a compact racing format with rechargeable power for repeated sessions. The set includes 2 remote controls, 2 Li-Ion drive batteries, 2 USB chargers and 4 AA transmitter batteries, so both vehicles are equipped for running from the start. A maximum driving time of 40 minutes keeps races going beyond a quick sprint and leaves room for repeated heats, overtaking attempts and back-to-back comparisons between the 2 cars. The pistol-grip transmitters use a trigger for throttle input and a side steering wheel layout familiar from hobby-grade RC driving. Steering fine adjustment on the vehicles helps correct the running direction when the track or surface calls for a more precise setup. Front LED lighting remains clearly visible as the cars move through indoor floors or paved outdoor sections, while the printed body shells give each model its own strong race-day presence. With an age marking of 8 years and up, the set suits shared racing sessions at home, quick duel formats in the driveway and casual practice laps where both cars can be charged, lined up and sent off again.

1:12 RaceRival Combo, RC car, 2.4G RTR
1:14 3-axle Material trailer, RC trailer

RC lorries & RC trucks

1:14 3-axle Material trailer, RC trailer

500907740

€699.99

At 1:14 scale, this 3-axle Material trailer brings the look and handling of a working cargo hauler into a detailed RC setup. The 981 mm long body combines a laser-cut steel frame in 3 mm and 1 mm sections with a real wooden floor application, creating a technical build with strong visual contrast between metal structure and load bed. The front wall is made from aluminium, while the rear bumper uses 8 mm aluminium for a solid, sharply defined finish. Left and right steel underride protection adds another authentic construction detail to the lower sides. The CNC-milled aluminium dropsides carry engraved surfaces and are built for active use rather than fixed display, with 9 functional panels, removable dropside posts, and 4 hinges on each dropside made from 1 mm steel. Neodymium magnets handle the locking, giving the side sections a tidy closing action without bulky external catches. Wide chromated wheels with ball bearings and wide tyres support smooth trailer movement, and the included suspension offers an optional 8 mm elevation for a different ride height. A steel spare wheel holder with spare wheel is fitted, and the finished trailer measures 981 x 195 x 210 mm with a weight of 6,900 g. Age 14+

1:14 3-axle Material trailer, RC trailer
1:14 Goldhofer BAU STN-L3, low loader kit

Models & trailers

1:14 Goldhofer BAU STN-L3, low loader kit

500907060

€584.99

Heavy-haul transport has a distinct presence in scale form, and the Goldhofer BAU STN-L3 brings that character into a 1:14 low loader kit with a long 1000 mm body, a width of about 200 mm, and a height of 270 mm. The laser-cut, hard-soldered steel profile construction gives the trailer its technical look, while the plateau with tailgate extends the transport layout for detailed truck scenes. The build centres on mechanical functions that suit model-building enthusiasts. The split folding loading ramps are arranged in 3/4 and 1/2 sections and can be folded down by hand for driving operation. A ramp length of 290 mm in the raised configuration is stated in the data. Three rear axles carry twin tyres, and the axle area is detailed with dummy air springs for a scale heavy-duty appearance. Ball bearing mounting supports the running gear, and the 7-chamber taillights can be retrofitted electrically. All columns are mechanically adjustable, and the front support area can be expanded with optional E-support legs. The trailer fits all Tamiya trucks, making it a strong match for detailed tractor units in 1:14 truck layouts. On a workshop bench, in a transport diorama, or coupled for slow manoeuvres with scale cargo, the low deck, upright ramp geometry, and multi-axle layout create the look of a working heavy equipment hauler. Age 14 Years  Warning! Not suitable for children under 14 years.

1:14 Goldhofer BAU STN-L3, low loader kit
1:16 Deutz-Traktor 8280TTV, RC tractor

RC tractors

1:16 Deutz-Traktor 8280TTV, RC tractor

500907706

€109.99

The Deutz-Traktor 8280TTV in 1:16 scale brings agricultural RC driving into a compact format with a matching trailer and a fully equipped ready-to-run setup. The model uses a 2.4 GHz remote control system and arrives with the drive battery, USB charger and 2 x LR03 AAA transmitter batteries, so all core components for operation are already in the box. Its 7.4 V system pairs with a 500 mAh Li-Ion battery to deliver up to 90 minutes of operating time, giving the tractor enough endurance for repeated hauling runs, careful reversing and steady trailer work. The trailer adds a second handling element to each session, since turns, alignment and positioning need more control than a single vehicle on its own. With 5 frequency channels available, the radio setup supports controlled input during forward runs, direction changes and tighter manoeuvres. The ready-to-run format keeps the focus on driving rather than sourcing the basic operating equipment separately. On the floor, the tractor and trailer combination suits routes with bends, loading-play setups and repeated parking tasks where the longer overall shape changes how each turn is approached. The 8+ age marking fits a model that combines vehicle control, trailer guidance and battery-powered runtime in one clearly structured RC format.

1:16 Deutz-Traktor 8280TTV, RC tractor
1:24 Ford GT, RC car, 2.4 GHz RTR

RC cars

1:24 Ford GT, RC car, 2.4 GHz RTR

500404330

€24.99

The Ford GT became one of the defining super sports car shapes of its era, and this 1:24 RC car brings that low, wide silhouette into a compact format built for quick laps and precise control. With a fully assembled ready-to-run setup, the model goes straight from charging to driving with the included 2.4 GHz remote control, Li-Ion drive battery, USB charger and transmitter batteries. At 195 mm long, 80 mm wide and 49 mm high, the body keeps the proportions of the road car clear while staying easy to handle on smaller indoor routes. The 172 g weight gives the chassis a light, agile feel in motion, and the fine-tuned steering supports accurate line changes through short straights and tighter bends. Front and rear LED lighting extends the visual effect beyond daylight conditions, while the licensed Ford design and realistic sports car look keep the model closely tied to its full-size inspiration. The 3.7 V drive system uses a 500 mAh Li-Ion battery and reaches up to 60 minutes of driving time at full capacity, making longer sessions possible without frequent charging breaks. Non-slip rubber tires work with the rear differential to maintain traction and stable handling as the car accelerates, turns and settles into repeated circuit runs. Age 6+ marks the recommended age, and the complete RTR format suits first RC laps as well as relaxed driving sessions for motorsport fans.

1:24 Ford GT, RC car, 2.4 GHz RTR
1:8 Rock Wilder, RC car, 100% RTR

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

500404257

€174.99

The 1:8 Rock Wilder brings large-scale off-road presence to every run with a 530 mm long chassis, full suspension and digital proportional control. In black and red trim, the ready-to-run setup pairs a type 550 brushed motor with water-resistant RC components for driving on mixed terrain where dust, loose gravel and uneven ground are part of the appeal. Its 355 mm width and 220 mm height give the model a broad, stable stance, while the 2552 g weight adds substance as the suspension works through ruts and bumps. Reinforced suspension arms support the independent layout at each corner, and the quick-change battery mount keeps battery swaps straightforward between sessions. The included 7.4 V 3000 mAh Li-Ion drive battery, USB charger, 2.4 GHz remote control and 4× LR06 transmitter batteries cover the core running equipment in one box. Age recommendation: 14 years+ The Rock Wilder suits trackside bashing, open gravel areas and compact dirt routes where the proportional steering and throttle inputs can be used with precision. Water-resistant electronics help the model stay focused on the route when conditions turn messy, and the RTR format keeps the emphasis on charging up and heading out for the next run.  Warning! Not suitable for children under 14 years.

1:8 Rock Wilder, RC car, 100% RTR
1:87 MB 1620 flatbed truck, RC model, RTR

RC models in 1:87 scale

1:87 MB 1620 flatbed truck, RC model, RTR

500504159

€129.99

The 1:87 MB 1620 flatbed truck with trailer brings compact RC control into H0 railway scenes with a fully assembled 100% RTR setup and finely scaled proportions. At 187 mm in length, the model is sized for dioramas and model railroad layouts where precise movement, lighting and sound add life to streets, depots and loading areas. A 2.4 GHz remote control system handles steering, speed and the switchable engine sound, while the integrated 3.7 V 75 mAh Li-Ion drive battery recharges through the transmitter in about 45 minutes. Front and rear LED lighting supports realistic operation in dimmer layout settings, and the very small turning circle helps the truck work through narrow routes and confined manoeuvring zones. The detailed body uses high-quality plastic construction with fine printing, and the removable tarpaulin changes the look of the trailer for different scene setups. A driver figure adds another scale detail for display, and the included trailer extends the vehicle's presence in transport scenes. With up to 60 minutes of operating time, the model suits longer running sessions on H0 layouts, from careful reversing at a loading bay to steady road movement between buildings and trackside structures.  Warning! Not suitable for children under 14 years.

1:87 MB 1620 flatbed truck, RC model, RTR
1:87 Mercedes Benz 200/8 Taxi, RC car, RTR

RC models in 1:87 scale

1:87 Mercedes Benz 200/8 Taxi, RC car, RTR

500504171

€109.99

The Mercedes Benz 200/8 shaped the look of everyday saloons in the late 1960s and 1970s, and this 1:87 RC car brings that familiar taxi silhouette into a compact radio-controlled format. The small scale and RTR layout combine classic road-car character with immediate driving action on desks, display areas, or smooth indoor surfaces. Its 100% RTR specification means the key running setup is already part of the set, keeping the focus on steering inputs and controlled movement rather than sourcing core equipment first. The included 5 batteries support a ready-to-start configuration straight from the pack. With a recommended age of 14 years, the handling and scale suit enthusiasts who enjoy compact vehicle models with a recognisable real-world subject. The taxi styling gives the body a distinct period look that stands apart from modern racing or off-road themes. Between short driving sessions, the 1:87 format also makes the model easy to place in a collection of miniature road vehicles. It works well as a small RC model for indoor runs, as a conversation piece on a shelf, or as a classic Mercedes Benz subject in a compact hobby lineup.  Warning! Not suitable for children under 14 years.

1:87 Mercedes Benz 200/8 Taxi, RC car, RTR
1:87 Mercedes Benz 200/8, RC car, 100% RTR

RC models in 1:87 scale

1:87 Mercedes Benz 200/8, RC car, 100% RTR

500504170

€109.99

The Mercedes-Benz /8 series shaped everyday motoring in the late 1960s and 1970s, and this 1:87 Carson model captures that familiar saloon silhouette in a compact radio-controlled format. Finished in blue and supplied as a 100% RTR version, the miniature is set up for immediate use with 5 batteries included. Its 1:87 scale gives the model a notably small footprint, making controlled runs possible in spaces where larger RC cars would feel oversized. The classic 200/8 body shape brings a recognisable road-car character to each manoeuvre, while the compact format invites careful steering, short direction changes and neat placement on smooth indoor surfaces. With batteries already part of the set, the focus stays on the driving session itself rather than on sourcing the basic power supply first. Between runs, the blue finish and saloon proportions also make the model easy to place on a desk or shelf as part of a collection of compact vehicles. The combination of RTR convenience, included batteries and 1:87 scale makes this Mercedes Benz 200/8 a concise entry into small-format RC driving for hobbyists aged 14 years and up.  Warning! Not suitable for children under 14 years.

1:87 Mercedes Benz 200/8, RC car, 100% RTR
1:87 VW Beetle, RC car, 2.4 GHz RTR

RC models in 1:87 scale

1:87 VW Beetle, RC car, 2.4 GHz RTR

500504182

€104.99

The Volkswagen Beetle remains one of the most recognisable car shapes of the 20th century, and this 1:87 RC version translates that silhouette into a compact model built for active driving. At 50 mm long, 20 mm wide and 18 mm high, the Bahama blue Beetle combines miniature scale with fully controllable handling and a detailed body that carries the character of the original into H0 format. Its 2WD RWD layout works with a brushed motor to deliver balanced running behaviour, while the 10 g weight keeps the model light on the surface. The officially licensed Volkswagen design is matched with front and rear LEDs that define the car clearly as it moves through table layouts, floor circuits or display-style street scenes. The 100% RTR set includes a permanently installed 3.7 V 40 mAh Li-Ion battery, 4x AAA transmitter batteries and a storage case, so the driving setup is complete straight away. The 2-channel radio system supports controlled runs with a range of up to 50 m, making the Beetle suitable for compact slalom routes, desk-side driving and small indoor courses where accurate line changes matter. Age marking: 14 years. Charging takes place through the transmitter and keeps the model ready for regular sessions between laps.

1:87 VW Beetle, RC car, 2.4 GHz RTR
1:87 VW T1 Bus Van, RC car, car trailer

RC models in 1:87 scale

1:87 VW T1 Bus Van, RC car, car trailer

500504166

€114.99

The VW T1 became one of the most recognisable light commercial vehicles of the 1950s, and this 1:87 RC version brings that silhouette into a compact driving format with a matching car trailer. At 115 mm long, 28 mm wide and 21 mm high, the ready-to-run model fits neatly into small layouts while still carrying the bus profile, printed finish and illuminated front and rear lighting. The 2.4 GHz radio system gives stable control for 1-player operation, and the fully proportional setup allows measured inputs instead of simple on-off movement. With a weight of 18 g, the model stays light in hand and easy to place on shelves or in model scenes between runs. The included Li-Ion drive battery is rated at 3.7 V and 75 mAh, while 4 LR03 AAA transmitter batteries are also included in the set. Steering trim supports precise correction when the bus tracks slightly left or right, which is especially useful on narrow routes where the small turning circle can be used to full effect. The display case adds a clean way to store the bus and trailer between sessions or present them as part of a collection. On a desk, shelf layout or compact indoor course, the combination of trailer detail, proportional control and long 50-minute runtime creates a focused micro RC driving session with a strong model-railway scale presence.  Warning! Not suitable for children under 14 years.

1:87 VW T1 Bus Van, RC car, car trailer
1:87 VW T1 Kastenwagen Jägermeister, RC car

RC models in 1:87 scale

1:87 VW T1 Kastenwagen Jägermeister, RC car

500504180

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 Carson version translates that familiar panel van shape into a compact RC format with Jägermeister livery. At 50 mm long and 20 mm wide, the model brings authentic proportions, detailed printing and front and rear LED lighting to desks, shelves and small indoor driving spaces. Its fully proportional control system gives measured steering and speed response instead of simple on-off inputs. A steering trim function helps fine-tune straight running, while the very small turning radius suits narrow table courses and close obstacles. The 2.4 GHz radio system supports stable control, and the sensitive forward and reverse function makes low-speed corrections easier in confined spaces. A brushed motor and 2WD RWD layout shape the driving character, while the permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time. With a height of 19 mm and a weight of 16 g, the van stays easy to place and store between runs. The set includes a display case for storage, which also keeps the miniature body protected when the model is off the course. 4x AAA transmitter batteries are included, so the RTR format covers the essentials for immediate indoor driving.

1:87 VW T1 Kastenwagen Jägermeister, RC car
2.4GHz KR-242XT Receiver, 4-channel radio unit

RC receivers and accessories

2.4GHz KR-242XT Receiver, 4-channel radio unit

505021021

€74.99

The KR-242XT is a compact 2.4GHz 4-channel receiver made for hobby-grade RC installations where clean electronics packaging and dependable channel allocation matter. Its short-format design suits model layouts with limited installation space, while the 4-channel configuration leaves room for more than the core driving functions in compatible radio-controlled builds. Within an RC setup, the receiver acts as the link between transmitter commands and the vehicle's onboard electronics, making channel management a central part of the build. The KR-242XT is positioned for enthusiasts who work with detailed model configurations and need a receiver that fits neatly into tighter chassis sections. The 2.4GHz specification places it in the current standard for modern radio control systems, and the compact housing supports tidy cable runs around surrounding components. With an age marking of 14 Years, it sits clearly in the hobby segment rather than entry-level toy use. This format suits workshop upgrades, replacement installations, and fresh RC builds where the electronics package needs to stay compact. In a carefully planned chassis layout, a short receiver can make the difference between a crowded interior and a cleaner, more accessible arrangement.  Warning! Not suitable for children under 14 years.

2.4GHz KR-242XT Receiver, 4-channel radio unit
Cyber Copter IR 2Ch, RC helicopter, RTF

RC helicopters

Cyber Copter IR 2Ch, RC helicopter, RTF

500507191

€21.99

The Cyber Copter IR 2Ch brings compact helicopter flying into a ready-to-fly format with a modern grey fuselage and a focused control layout. At 230 mm long, 95 mm high and with a 190 mm rotor diameter, this RC helicopter stays compact enough for indoor sessions while reaching speeds of up to 10 km/h. Its flight system combines infrared control with 2 channels for clear directional input, and the integrated gyroscope helps keep movement steady once airborne. Fine tuning comes from individually adjustable left and right trim, allowing the flight path to be corrected to suit the room and the handling style. The switchable LED position lights are activated from the transmitter, making the model easier to track visually when the light drops at dusk. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime per charge, and the USB charger keeps charging straightforward between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8 Years

Cyber Copter IR 2Ch, RC helicopter, RTF
Italeri JAS-39D Gripen Twin Seater Model Kit

Military aeroplane models

Italeri JAS-39D Gripen Twin Seater Model Kit

510002664

€26.79

The Italeri JAS-39D Gripen Twin Seater model kit brings a modern Swedish fighter into 1:48 scale, combining the compact canard-delta silhouette with the extended 2-seat cockpit layout of the training variant. The subject entered service in the second half of the 1990s, and the finished aircraft carries the sharp lines, single engine exhaust and multirole character that define the Gripen family. This JAS-39D version was developed to meet advanced pilot training requirements while keeping essentially the same performance as the single-seat fighter. That background gives the build a clear technical identity, with a configuration linked not only to training duties but also to reconnaissance and ground-attack missions. The aircraft's aerodynamic design is noted for excellent maneuverability, and the full-size jet reached a maximum speed of Mach 2.0. The box image also identifies this release as a New Decals Edition, with a Super Decals sheet for 4 versions. Figures are not included. On the workbench, the 1:48 scale gives room to focus on painting, markings and the distinct proportions of the twin-seat canopy. Once completed, the model fits naturally into modern military aircraft collections, whether displayed as a Swedish air power subject or alongside other late 20th century combat aircraft. 14 years is the recommended age.  Warning! Not suitable for children under 14 years.

Italeri JAS-39D Gripen Twin Seater Model Kit
Italeri Mercedes-Benz Wrecker Truck Model 1:24

Model trucks

Italeri Mercedes-Benz Wrecker Truck Model 1:24

510093808

€76.99

The Italeri Mercedes-Benz Wrecker Truck Model 1:24 captures the distinctive recovery configuration developed from the Mercedes-Benz MB 2238 6x4 heavy-duty road truck. Instead of a standard haulage layout, this scale build focuses on the specialist wrecker conversion, with its rear-mounted crane and service body shaping the silhouette of a vehicle built to recover broken-down or accident-damaged heavy trucks. The full-size MB 2238 combined engine power with a solid chassis and suspension layout, and that mechanical foundation defines the character of this model. The recovery body adds numerous storage compartments for tools and towing equipment, giving the finished truck the purposeful look of a roadside support vehicle rather than a conventional transporter. In 1:24 scale, those details create a build with strong workshop presence and a clear link to long-distance heavy vehicle operations. The subject also stands out through its 6x4 configuration, a key part of the truck's weight distribution when handling demanding towing work. On the bench or in a collection of commercial vehicle subjects, the wrecker format brings a different visual rhythm from standard tractor units and cargo trucks. The crane, compartment layout and recovery role give the finished model a focused industrial identity that suits display alongside other classic heavy transport builds.  Warning! Not suitable for children under 14 years.

Italeri Mercedes-Benz Wrecker Truck Model 1:24
Italeri Reefer Trailer Model Kit 1:24 Scale

Trailers & accessories

Italeri Reefer Trailer Model Kit 1:24 Scale

510103904

€62.99

The Italeri Reefer Trailer model kit brings a latest-generation refrigerated semitrailer into 1:24 scale with a finished length of 58.7 cm and a distinctly European freight profile. The long box body, front-mounted refrigeration unit and triple-axle rear section create the look of a temperature-controlled trailer waiting at a loading dock or lined up with a tractor unit in a road transport display. This assembly kit is built around the detailing that gives a reefer its working identity. The chassis construction, underbody equipment and support-leg structure shape the trailer from the frame upward, while the new wheels update the running gear for a more current appearance. Large side graphics for NORD CARGO, route names including Barcelona, Castellon, Madrid, Malaga and Moerdijk, plus rear-door markings and registration options add a commercial fleet character drawn from European cold-chain transport. The finishing stage also includes paintwork and decal application, which gives the long side panels and rear doors their full visual impact. With 600 minutes assembly time, the build suits a slower bench session focused on alignment, painting and final decoration. Paints, cement and tools are required separately. Once completed, the 1:24 trailer works well as a standalone display subject or as part of a larger truck modelling scene with depot, warehouse or highway freight context.

Italeri Reefer Trailer Model Kit 1:24 Scale
MC-8 2.4GHz MX-F TR set, RC radio system

RC remote controls

MC-8 2.4GHz MX-F TR set, RC radio system

500501040

€104.99

The MC-8 2.4GHz MX-F TR set brings game-controller handling to an 8-channel RC radio system, combining the transmitter with the MR-8 micro receiver for compact installation in demanding model layouts. With the receiver measuring 27 x 28 x 15 mm, the set suits builds where available space matters as much as dependable multi-channel control. Its control layout goes beyond basic steering and throttle. The left and right 3D joysticks each include a push-button function, opening extra input options for assigned model functions. A Uni/Fut. connector system supports integration with compatible equipment, and the set is specified for use with TAMIYA MFC-01, MFC-02 and MFC-03 as well as DMD/MF units. The 2.4 GHz transmission standard supports modern radio operation for hobby models that need several functions managed from one handset. In workshop setups, scale trucks and function-rich RC builds can benefit from the extra channels for lighting, sound or special movements where the connected system supports them. 4 AAA batteries are required separately for operation, making the set ready to slot into existing hobby equipment with a straightforward power requirement.

MC-8 2.4GHz MX-F TR set, RC radio system
Others Mercedes 300 SL Model Car 1:8 Red Replica

Diecast model kits

Mercedes 300 SL Model Car 1:8 Red Replica

520010114

€1,049.99

The iXO Premium Collectables Mercedes 300 SL captures one of the most recognisable coupe silhouettes in motoring history as a 1:8 scale model in red. The long bonnet, rounded roofline and low body create a strong display presence, while the glossy finish and bright trim bring out the flowing shape seen on the original car. Across the body, the model reproduces hallmark Mercedes-Benz details such as the front grille star, chrome bumpers, side mouldings and the vent section behind the front wheel with its horizontal bars. Round headlamps, windscreen wipers, mirrors, window frames and period-style wheel covers add further definition to the exterior. Through the clear glazing, the beige interior remains visible and gives the cabin more depth than a closed, darkened shell. With 602 parts, the construction centres on recreating the car's proportions and trim rather than reducing the shape to a simplified toy-like form. Assembly is required, and the stated build time is 2100 minutes. That extended format suits a display-focused project in which the bodywork, cabin details and brightwork can be appreciated step by step. Once completed, the model works as a striking centrepiece on a shelf, in a study or alongside other classic vehicle replicas.  Warning! Not suitable for children under 14 years.

Mercedes 300 SL Model Car 1:8 Red Replica
Nano Racer Yacht 2.4G

RC yachts

Nano Racer Yacht 2.4G

500108057

€19.99

RC action on the water! With the Nano Racer Yacht, luxury RC fun on the water is realized. The ready-to-run yacht model delivers full driving fun right after unpacking and brief charging. It is controlled with a 2.4 GHz radio remote control and offers a range of up to 40 meters. Thanks to the safety shutdown, the propellers only work when the model is in contact with water. All RC components are water-resistant, making the yacht ideal for exciting action on the water. The set includes a LiPo battery and clear instructions for quick start-up. Compact, fast, and easy to control, the Nano Racer Yacht is a fun watercraft for hobby and play.

Nano Racer Yacht 2.4G
Nano Tyrann 230 Gyro, RC helicopter, 2CH IR

RC helicopters

Nano Tyrann 230 Gyro, RC helicopter, 2CH IR

500507155

€24.99

Compact dimensions and a coaxial rotor layout give the Nano Tyrann 230 Gyro a light, agile presence in indoor flight, while intelligent gyro electronics keep the model composed during lift-off, hovering and direction changes. At 225 mm long, 97 mm high and only 31 g in weight, this 2-channel RC helicopter brings controlled handling into a format that is easy to store and quick to prepare. The infrared control system focuses the flying experience on the core inputs, with left and right trim on the transmitter to correct the track when needed. A 3.7 V 130 mAh LiPo flight battery powers up to 8 minutes of flying time, and charging runs through the included USB cable. The rotor diameter of 180 mm gives the helicopter a balanced footprint for indoor rooms, where short climbs, hovering practice and careful turns can be repeated in a manageable space. The switchable LED adds a visible point at the nose during flight and can be controlled directly from the transmitter. The ready-to-fly set suits spontaneous sessions in living rooms, hobby spaces or other indoor areas where compact RC aircraft can be flown with precision. Age 12 years and up. Only suitable for indoor use.

Nano Tyrann 230 Gyro, RC helicopter, 2CH IR
Scalextric 1:32 TFATF Dodge Charger Dom Toretto

Cars

Scalextric 1:32 TFATF Dodge Charger Dom Toretto

560004573

€67.99

The Scalextric 1:32 TFATF Dodge Charger - Dom Toretto brings a recognisable Fast and Furious machine into slot racing with a compact scale that suits repeat laps, close duels and character-led grid lineups. The Dodge Charger body gives the car a strong screen-linked presence on the circuit, while the guided slot format keeps the action focused on throttle control, lane discipline and clean corner exits. As a 1:32 slot car, it fits naturally into layouts built around the same scale and supports side-by-side racing with other compatible models in the range. The TFATF designation ties the car directly to the Fast and Furious world named in the data, giving collectors and racers a specific vehicle identity rather than a generic muscle car shape. The Dom Toretto version adds a named character connection that strengthens themed race setups and display shelves. 14 Years is the stated age marking. On home circuits, the car suits short sprint sessions, repeated lap practice and head-to-head runs where the Dodge Charger silhouette stays easy to pick out through bends and on straights. Between races, the same 1:32 format also makes it a strong addition to a shelf lineup built around film cars and slot racing favourites.

Scalextric 1:32 TFATF Dodge Charger Dom Toretto
Scalextric Jaguar MK2 G. Williams Racing 1:32

Cars

Scalextric Jaguar MK2 G. Williams Racing 1:32

560004596

€59.99

Scalextric Jaguar MK2 G. Williams Racing brings a classic competition saloon into 1:32 scale, combining the long roofline, upright proportions, and period racing character that make the MK2 such a recognisable name on a slot layout. The compact scale suits home circuits where close racing, lane changes, and repeated lap running keep the car in constant view. The G. Williams Racing decoration gives this version a specific track identity rather than a generic road-car finish, which adds extra appeal for collectors who enjoy named racing subjects. At 1:32 scale, the car sits naturally alongside other vehicles in the same format, helping create a consistent field for display or race-day line-ups. The model is marked for ages 14 years and up, matching hobby use where handling, placement on the slot, and layout setup are part of the routine. On a shelf, the Jaguar MK2 shape brings a strong vintage racing presence through its saloon silhouette and competition livery. On the circuit, the same body style adds variety to mixed grids, whether the session focuses on classic touring themes or simply on running a distinctive car through repeated laps at home.

Scalextric Jaguar MK2 G. Williams Racing 1:32
Scalextric Nissan R34 Skyline 1:32 Car

Cars

Scalextric Nissan R34 Skyline 1:32 Car

560004674

€67.99

Scalextric Nissan R34 Skyline brings the 2Fast 2Furious theme into a 1:32 slot car format that suits both racing layouts and display shelves. The compact scale gives the car a familiar presence on track while keeping it easy to line up with other 1:32 vehicles in the same collection. The Nissan R34 Skyline name carries strong recognition among performance car fans, and that identity translates neatly into a model made for powered racing systems. As part of the powered vehicles and electric car accessories category, this car is intended to extend an existing setup rather than stand alone. The 14 Years age marking places it in a hobby-focused range, making it a fitting choice for older fans who build themed grids, compare liveries and rotate cars through regular sessions. The 1:32 format also helps when organising storage, planning race pairings and keeping a collection consistent across a slot layout. On the track, the film-linked styling gives each run a clear visual character, whether the car is joining a head-to-head race, filling a franchise-themed line-up or taking a place in a display cabinet between sessions. It also works well as an additional car for expanding a current Scalextric collection around recognisable road and screen icons.  Warning! Not suitable for children under 14 years.

Scalextric Nissan R34 Skyline 1:32 Car
Scalextric Porsche 963 Daytona 25 1:32 Car

Cars

Scalextric Porsche 963 Daytona 25 1:32 Car

560004653

€59.99

Scalextric Porsche 963 Daytona 25 captures a current endurance racing shape in a 1:32 slot car format, pairing the low, wide prototype profile with the JDC Miller MotorSports livery for a focused circuit presence. The Porsche 963 name and Daytona 25 race theme give the car a recognisable motorsport identity that reads clearly on the track as it moves through bends, chicanes and straights. The 1:32 scale keeps the car aligned with a widely used slot racing format, making it a natural fit within existing race line-ups and garage displays. Its modern prototype silhouette brings a different visual character from GT and touring entries, with a body shape defined by endurance-racing proportions rather than road-car cues. The named JDC Miller MotorSports decoration adds team-specific detail instead of a generic race finish, which helps each lane assignment and race order stay easy to follow during head-to-head sessions. Batteries are not included. With an age marking of 14 Years, this car sits in the older hobby category and suits collectors as well as regular home circuit use. It works well as a single addition to a current grid, as a themed Daytona entry for endurance-style running, or as part of a broader modern prototype line-up built around real race names and liveries.  Warning! Not suitable for children under 14 years.

Scalextric Porsche 963 Daytona 25 1:32 Car
Scalextric VW Golf MK1 1:32 Racing Car

Cars

Scalextric VW Golf MK1 1:32 Racing Car

560004625

€59.99

Scalextric VW Golf MK1 1:32 Racing Car brings Malcolm Jeffs Racing style into a compact slot car format that reads clearly on the track and on display. The 1:32 scale gives the body a balanced footprint for home racing layouts, while the VW Golf MK1 shape carries the crisp hatchback profile that made this model a familiar sight in touring-car circles. The product data states an age marking of 14 Years, placing this model within a hobby-led range rather than early-years play. Its named Malcolm Jeffs Racing livery gives the car a specific motorsport identity instead of a generic road-car finish, which helps it sit naturally alongside other competition-themed vehicles in a collection. As part of the powered vehicles category, it is designed for electric or battery car set use, and the compact scale makes it easy to combine with existing 1:32 slot racing scenes. The short designation focuses on a single real-world model and racing name, giving the car a clear collector angle as well as track appeal. Set on a home circuit, the VW Golf MK1 shape adds a recognisable silhouette through bends, straights and grid line-ups. Away from racing sessions, the Malcolm Jeffs Racing decoration and 1:32 proportions also suit shelf display with other classic motorsport subjects from the Scalextric range.  Warning! Not suitable for children under 14 years.

Scalextric VW Golf MK1 1:32 Racing Car
Scania T143 M500 Top Line 1:24 Model Kit

Model trucks

Scania T143 M500 Top Line 1:24 Model Kit

510000736

€62.99

The Italeri Scania T143 M500 Top Line captures a landmark heavy truck in 1:24 scale, translating the presence of the 1990s road icon into a detailed assembly kit. Its subject is the Scania 143 M500 Topline, a tractor unit known for combining long-distance capability with a high cab format that gave the vehicle its unmistakable road profile. The original truck was defined by a 500-horsepower V8 engine and a 16-speed transmission, and those specifications give this model much of its appeal as a technical replica. The Topline configuration is central to the look, with a high, spacious cabin that set this version apart within commercial transport. The source vehicle was also associated with an advanced braking system, air suspension, strong efficiency and substantial load capacity, placing it firmly in the world of heavy logistics. Assembly is required, and the stated build time is 600 minutes. The box contents list an assembly kit. On the workbench, the 1:24 format gives the truck a scale large enough to reward careful painting and finishing while keeping the build focused on a single classic tractor unit. Once completed, the model suits display settings that highlight cab shape, grille details and the character of a well-known European long-haul design. Minimum age: 14 years.  Warning! Not suitable for children under 14 years.

Scania T143 M500 Top Line 1:24 Model Kit
X4 Quadcopter Yairo, RC aircraft, 2.4 GHz RTF

- 16 %

RC quadcopters

X4 Quadcopter Yairo, RC aircraft, 2.4 GHz RTF

500507201
€35.99

€42.99

The X4 Quadcopter Yairo brings compact quadcopter flying together with illuminated detail and straightforward control in a ready-to-fly format. With a ring diameter of 150 mm, a height of 37 mm and a weight of 52 g, the model stays light and agile in the air while the three-colour LED setup gives each flight a vivid visual presence. Its electronically rotatable LED ring is controlled by the remote control, adding a moving light element that changes the look of the quadcopter during flight. The 3.7 V 500 mAh LiPo flight battery supplies up to 8 minutes of runtime, and the included USB charger keeps the setup simple between sessions. 4 frequency channels support responsive handling, while the compact dimensions make the model easy to carry to open indoor spaces or calm outdoor areas. The included LR06/AAA transmitter batteries mean the full set is ready for use straight from the contents provided. Short practice flights, evening hovering sessions and quick manoeuvre runs all suit this RC aircraft well. The 8+ age marking and 1-player format make it a focused flying model for learning control inputs, refining reactions and enjoying illuminated flights with a compact quadcopter layout.

X4 Quadcopter Yairo, RC aircraft, 2.4 GHz RTF
XS Deep Sea Dragon, RC submarine, 100%RTR

RC speed boats

XS Deep Sea Dragon, RC submarine, 100%RTR

500707117

€39.99

Compact RC submarines bring a different kind of model action, and the XS Deep Sea Dragon shifts that action below the surface. This 100%RTR RC submarine combines a compact orange hull, 3-channel 40 MHz control and blue LED illumination for visible manoeuvres in baths, pools and aquaria. The set includes the mini submarine with RC system, a 3.7 V 90 mAh Li-Ion drive battery, a USB charger, 2 transmitter batteries and instructions. Forward, backward, left and right steering are joined by dive and surface functions, so movement is not limited to a flat path across the water. The blue LEDs stay visible during operation and help keep the model in view while it changes depth. With up to 6 minutes of runtime, each charge suits short underwater runs with a clear start and finish. The USB charging cable can be stowed in the transmitter, so the charging lead stays with the control set between sessions. In use, the compact format suits smaller water spaces where tight turns and depth changes stay easy to follow. Age 8+ marks the recommended age. The submarine is intended for fresh water use in swimming pools, baths and aquaria; do not use in salt water.

XS Deep Sea Dragon, RC submarine, 100%RTR
1:10 KO RSx4S-one10X, servo, low profile

RC servos

1:10 KO RSx4S-one10X, servo, low profile

505030137

€124.99

The KO RSx4S-one10X is a 1:10 low-profile servo shaped for compact RC chassis where installation height and steering packaging need careful control. Its metal gear layout and the stated 11.8 V specification place it firmly in performance-focused electronics setups, giving model-building enthusiasts a concrete steering component for advanced builds. The low-profile housing suits layouts where body clearance, linkage position and surrounding electronics leave little spare room. In that context, the 0.10-second speed figure supports fast steering response when direction changes need to happen with little delay. The servo format also makes it relevant for 1:10 on-road and competition-style configurations that rely on tidy component placement rather than oversized hardware. As an electronic control component, it belongs in a build where the steering system, power supply and chassis geometry are chosen as a matched package. On the bench, the compact form helps when planning a clean electronics layout around the steering area. Once installed in a compatible 1:10 model, the combination of low-profile dimensions, metal gears and high-voltage operation supports focused tuning for precise handling response.  Warning! Not suitable for children under 14 years.

1:10 KO RSx4S-one10X, servo, low profile
1:10 Torque Beast, RC car, 2.4 GHz RTR

RC truggies & RC monster trucks

1:10 Torque Beast, RC car, 2.4 GHz RTR

500404358

€129.99

The 1:10 Torque Beast brings classic monster truck presence to RC driving with a 430 mm length, 310 mm width and 200 mm height that give the chassis a broad, purposeful footprint on rough ground. A solid bumper with integrated LED lighting adds a bright front-end detail, while water-resistant RC components and splash-proof electronics support running when the surface turns damp or dusty. At 1364 g, the model combines its size with a manageable overall weight that suits quick direction changes and repeated runs. The 7.4 V 1500 mAh Li-Ion drive battery is included, and the stated running time reaches 25 minutes before the pack heads back to the USB charger. The fully assembled RTR format keeps the focus on driving rather than setup, and the 2.4 GHz system supports stable control without the frequency crystals older RC systems required. Minimum age: 14 years. On gravel paths, compact dirt sections or uneven yard surfaces, the Torque Beast has the ground clearance and tire format to keep the run lively without losing control. Evening sessions gain extra character from the front LED lighting, and the included battery set means the truck is equipped for the first outing straight away.

1:10 Torque Beast, RC car, 2.4 GHz RTR
1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR

RC Crawler

1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR

500404315

€249.99

The 1:10 X-Crawlee Pro 3.0 brings crawler driving into a 43.5 cm format built for rough ground, with a 270 mm width, 235 mm height and a weight of 2280 g that gives the model a planted stance on the trail. Its 100% RTR setup puts the focus on driving from the first session, while the 2.4 GHz remote control system keeps control inputs clear and direct. Power comes from the included 7.2 V NiMH drive battery with 1800 mAh, charged via the included 7.2 V / 1 A USB charger. At full capacity, driving time reaches up to 70 minutes, giving longer runs across stones, dirt tracks and uneven paths without frequent charging breaks. The controller is compatible with NiMH and LiPo batteries, which broadens battery choice for later setup changes. Full ball bearings support efficient running through the drivetrain, while the suspended rigid axles give the crawler the axle movement needed for slow, technical sections. The ready-to-run set includes the model, the radio system, the drive battery, the USB charger, 4 AA transmitter batteries and the manual. With a 14 years+ age marking and a single-vehicle setup, the X-Crawlee Pro 3.0 suits focused crawling sessions where line choice, throttle control and steering precision shape every climb.  Warning! Not suitable for children under 14 years.

1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR
1:10 XS Tekuro, RC car, 4WD 100% RTR

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 4WD 100% RTR

500404360

€199.99

The 1:10 XS Tekuro brings fast off-road driving into a 410 x 300 x 175 mm format with permanent 4WD, a high-torque 550 brushed motor and a top speed of up to 40 km/h. Grey and green bodywork, 110 mm monster tyres and a raised stance give the model a strong trail-ready presence before the first run even starts. Its drivetrain is built around a central steel cardan shaft, reinforced steel drive shafts at the front and rear, and metal differentials with steel bevel gears on both axles. Ball-bearing mounting throughout supports efficient running, while the XT60 high-voltage plug system and quick-change battery holder simplify battery swaps between sessions. The 8 kg steering servo uses a metal gearbox and water-protected construction, matched with splash-protected electronics and a water-protected 2.4 GHz radio system. The included 2600 mAh 7.4 V Li-Ion battery supports about 15 minutes of driving time, and the complete RTR setup keeps preparation focused on charging and heading out. At 1741 g, the chassis has the planted feel needed for dirt paths, gravel sections and uneven ground. Tight turns, short bursts of acceleration and repeated launch attempts all suit the Tekuro's mix of traction, suspension travel and wheelie-ready rear setup.  Warning! Not suitable for children under 14 years.

1:10 XS Tekuro, RC car, 4WD 100% RTR
1:14 12V LED-PCB Taillight, model accessory

Electronics

1:14 12V LED-PCB Taillight, model accessory

500907388

€57.99

A 7-section taillight layout is a defining detail on many scale truck builds, and this 1:14 LED-PCB set brings that look into a compact 12V lighting accessory. The pair is designed as matching left and right boards, each marked L or R, creating a clear basis for symmetrical rear installation on a model vehicle. Each green PCB carries surface-mounted electronic components and preattached wiring, giving the lighting setup a tidy technical character once installed behind the rear light positions. The 5 attached leads on each board are colour coded in blue, black, yellow, red and white, which helps keep the wiring paths distinct during integration into an existing electrical layout. Mounting holes near the lower corners support fixed placement inside the body or light housing where a secure fit is needed. In workshop-style upgrade projects, the mirrored board design suits truck or trailer rear ends that need matching light units on both sides. The 12V specification makes the set suitable for model electrical systems built around that voltage, while the compact board format leaves room for careful routing and clean finishing in detailed 1:14 installations.

1:14 12V LED-PCB Taillight, model accessory
1:14 2-Axle Dump Semi-Trailer, trailer

Models & trailers

1:14 2-Axle Dump Semi-Trailer, trailer

500907312

€589.99

Built in 1:14 scale, this 2-axle dump semi-trailer brings the look of a full-size tipper into a model-building format with a rigid PVC body, a CNC-milled aluminum frame and a 4-wheel layout. The silver dump body, black chassis and raised front platform create the working profile of a road-going bulk trailer, whether coupled to a tractor unit or parked on its support legs. The assembly kit focuses on mechanical detail rather than simplified styling. Vertical body panel lines, mudguards, rear underrun protection and ladder elements give the trailer a technical finish, while the king pin can be adjusted to suit the setup. The chassis uses new axles with 8 mm lift, and the rear section is shaped around a mechanically unlocking tailgate for realistic unloading action when a tipping function is installed separately. 7-chamber taillights and dummy air spring details extend the scale appearance across the rear and underside, and the ball-bearing wheel setup supports smooth movement during handling. On a workshop shelf, in a truck yard scene or behind a matching 1:14 tractor, the semi-trailer adds a strong construction-transport theme with visible engineering throughout the frame and body. Assembly kit and manual are included. A spindle drive, motor, battery, switch, radio gear, a charger and paints are required separately for expanded functions and finishing.  Warning! Not suitable for children under 14 years.

1:14 2-Axle Dump Semi-Trailer, trailer
1:14 2-Axle Dump Trailer, trailer kit

Models & trailers

1:14 2-Axle Dump Trailer, trailer kit

500907425

€519.99

The 1:14 2-Axle Dump Trailer brings working tipper style into a scale truck setup with a tandem-axle layout, a gray rigid PVC dump body and a steel profile frame with laser-cut, laser-welded construction. Built as an assembly kit, it focuses on the mechanical character of a real dump trailer, from the drawbar and support leg to the rear gate area and underbody linkage. The chassis uses 8 ball bearings across the wheel setup, giving the running gear a more precise feel as the trailer rolls behind a compatible tractor unit. Fulda Variotonn wide offroad tyres and the trailer axle with air ride dummy push the model further toward commercial-vehicle realism, while the 7-section tail lights add a recognisable rear-end detail. The automatic back wall locking with 2-hook design gives the rear section a functional finish that matches the tipper concept. The support leg keeps the trailer upright when detached, and the drawbar with hitch eyelet completes the classic central-axle trailer layout seen in heavy haulage scenes. On the bench, the kit offers a focused build around frame, axle and body assembly. Once finished, the trailer suits construction, transport and unloading scenes in 1:14 scale layouts, whether parked as a standalone model or coupled into a larger truck combination. Age 14 Years. Spindle drive, gear box motor, a control switch and paints are required separately.  Warning! Not suitable for children under 14 years.

1:14 2-Axle Dump Trailer, trailer kit
1:14 2-Axle Material Trailer, trailer kit

Models & trailers

1:14 2-Axle Material Trailer, trailer kit

500907624

€574.99

Built for 1:14 truck scenes, the 2-Axle Material Trailer brings a long loading bed, twin-axle layout and working drop-side bodywork into a scale transport build with a clear commercial look. The grey panel sides, dark front bulkhead and wood-look floor give the trailer the character of a real material hauler, whether it is coupled behind a road tractor or parked at a loading point. The kit structure goes beyond a simple rolling chassis. The assembly sequence includes 2 axle units, a pivoted bogie, a main frame with crossmembers, mudguards, underride protection, rear bumper parts and upright posts around the bed. Ball bearings are fitted into each wheel hub, and the axle geometry offers normal height or a +8 mm position during assembly. Rear light housings are part of the build, and the manual also shows optional LED taillight boards as separate accessories. A spare wheel holder and additional fittings are listed as optional accessories rather than included contents. Once assembled, the trailer suits realistic loading and transport layouts in 1:14 scale, from building-material scenes to depot and yard setups. The opening side panels and rear section support a more active display style, while the detailed underframe, mudflaps and side protection parts give the finished trailer convincing presence from low viewing angles.  Warning! Not suitable for children under 14 years.

1:14 2-Axle Material Trailer, trailer kit
1:14 2-axle Riedler, stanchion trailer

Models & trailers

1:14 2-axle Riedler, stanchion trailer

500907622

€509.99

The 1:14 2-axle Riedler stanchion trailer brings timber-haul detail into a scale transport setup with a steel sandwich frame, solid aluminium stanchions and a long, purposeful silhouette. At 620 x 190 x 305 mm and 2,600 g, the trailer adds real presence to a model road train while reflecting the look of the full-size Riedler vehicle named in the licence. Its mainframe uses 3 mm and 1 mm sheet steel parts that are laser cut and CNC bent, and the bogie follows the same sandwich construction for a consistent mechanical layout. The mounted bogie is adjustable and uses sliding pads to support manoeuvring through tighter course sections. A one-piece drawbar in fibre-reinforced plastic carries a chequer plate application and is held at a coupling height of 75 mm by 2 springs. The semitrailer axle includes dummy pneumatic springs, while the left and right underride guards and the CNC-milled rear bumper add further metal detail. The stanchion holders can be loosened with 2 grub screws, then repositioned or removed to suit different loading arrangements for logs or other long cargo. Ball-bearing mounted chromium wheels with wide tyres, mudguard splash protection, bumper mud flaps, a licence plate holder and 7-compartment rear lights build up the finished transport character. A decoration set is included. Age 14 Years. The Carson towing coupling 500907182 is required separately for use on the TAMIYA Volvo FH16 tractor unit.  Warning! Not suitable for children under 14 years.

1:14 2-axle Riedler, stanchion trailer
1:14 2-Speed Shift Gearbox Compact, gearbox

Basic accessories

1:14 2-Speed Shift Gearbox Compact, gearbox

500907265

€199.99

A 2-speed transmission changes the character of a scale truck build, and this 1:14 Compact gearbox brings that function into a neatly machined aluminium unit. The compact housing gives the drivetrain a technical focal point while keeping the installation footprint suited to tighter chassis layouts. The assembly data points to use with the original Tamiya motor, so the gearbox is built around a clearly defined motor fitment rather than a vague universal claim. The housing uses a front circular mounting face with multiple screw points, creating a structured base for fastening into the model. A shaft coupling is secured with a 3 x 3 mm set screw, and the instructions specify gel-type thread lock on the marked fastening point for a firm mechanical connection. The motor plate is attached with 3 x 8 mm screws, and an assembly dimension of 11 is shown in the motor fitting step. An optional servo mount for the 2-speed function is referenced in the documentation. In a 1:14 road truck or working vehicle project, this gearbox suits builders who want the drivetrain to feel more like a scaled mechanical system rather than a simple direct drive layout. It also fits detailed upgrade builds where aluminium parts, visible fastening points and a dedicated shifting mechanism add workshop character to the chassis.

1:14 2-Speed Shift Gearbox Compact, gearbox
1:14 20Ft. Sea-Container, kit, trailer load

Models & trailers

1:14 20Ft. Sea-Container, kit, trailer load

500907335

€199.99

Freight containers shaped modern transport with a standardised form built for road, rail and port handling. This 1:14 20Ft. Sea-Container Kit brings that familiar cargo silhouette into a scale truck setup with a 432 mm length, 180 mm width and 185 mm height. The structure combines an anodised silver aluminium frame with plastic sheet body sections that reproduce the look of a traditional container. Corrugated surfaces, corner details and the separate frame layout give the model the character of a working freight load rather than a plain box shape. The plastic panels are paintable, which supports custom liveries, fleet styling or a weathered finish that matches a chosen tractor unit and trailer combination. At the rear, the doors are movable and fitted with a locking mechanism, so the handling detail is part of the build rather than only a visual effect. The container is designed for the 2 axle container semi-trailer 500907334 and locks to the chassis via twist-locks. That mounting method reflects the technical logic of full-size container transport and helps the model sit naturally in logistics, harbour or long-haul display scenes. 14 Years marks the recommended age.

1:14 20Ft. Sea-Container, kit, trailer load
1:14 20Ft. Semitrailer, trailer kit, tandem axle

Models & trailers

1:14 20Ft. Semitrailer, trailer kit, tandem axle

500907334

€274.99

Built around a 1:14 scale layout, the 20Ft. Semitrailer kit brings container transport style into a detailed truck setup with a black anodised aluminium frame and a compact tandem-axle format. The 475 mm long chassis creates a clear, purposeful silhouette behind a tractor unit, while the 180 mm width and 135 mm height keep the proportions aligned with scale road-haulage scenes. The running gear combines swing axle suspension with flat springs, giving the underframe a more technical, model-engineered character than a plain static trailer base. Tyres with foam inserts add substance to the wheel setup and support a fuller tyre shape on the rims. Mechanical seat posts strengthen the parked semitrailer look at the front section and add another visible chassis detail for display or workshop scenes. The open kit format also leaves room for a container-focused build concept rather than fixing the trailer to a single body style from the outset. Coupled to a matching truck, the semitrailer suits freight yard layouts, road transport displays and scale driving sessions built around container handling themes. A suitable lamp set, 300056502, is available for builders who want to extend the trailer with matching light equipment. Age 14 Years

1:14 20Ft. Semitrailer, trailer kit, tandem axle
1:14 3+1-section Trailer Taillight, model part

Basic accessories

1:14 3+1-section Trailer Taillight, model part

500907261

€15.99

A 3+1-section taillight layout is a familiar detail on working trailers, and this 1:14 scale set brings that look into model form with compact rear light components for truck and trailer builds. The combination of shaped housings and separate coloured inserts gives the rear end more structure than a printed or plain surface alone. Silver-grey moulded parts form the taillight bodies, while the transparent inserts add the distinct colour zones that define each section. The set includes paired components for a balanced rear installation, making it suitable for left and right placement on a trailer model. The small parts format suits careful detailing work, especially where scale realism depends on visible separation between housing and lens areas. On display, the layered construction creates a more technical finish; on a running model, it strengthens the road-vehicle character of the rear section. This accessory fits naturally into workshop sessions focused on upgrading a trailer body, refining a custom build, or replacing simplified rear details with a more defined light arrangement. The 14 years marking is stated for the set, matching its small-scale hobby character and detail-focused handling.

1:14 3+1-section Trailer Taillight, model part
1:14 3-Axle Flatbed Trailer III, trailer

Models & trailers

1:14 3-Axle Flatbed Trailer III, trailer

500907650

€539.99

Heavy transport takes shape in 1:14 scale with the 3-Axle Flatbed Trailer III, a detailed kit built to pair with TAMIYA tractors. The long platform, solid front wall and multi-axle layout give the model the look of a working road trailer ready for oversized loads, machinery or palletised cargo. The chassis uses a laser-cut steel frame in 3 mm and 1 mm material, supported by a massive aluminium front wall and steel underride protection on the left and right sides. A bumper made from 8 mm aluminium adds another strong visual and structural element at the rear. The loading area measures 981 mm in length, with an overall width of 195 mm and height of 210 mm, giving the trailer a notably long deck in this scale. At 4,400 g, the assembled model carries a substantial presence on display and in convoy scenes. The new trailer suspension can be built at normal height or with the included +8 mm elevation, adding flexibility to the finished stance. The real wood deck surface and recessed fastening points suit scale freight setups, from construction loads to industrial transport scenes. Ball-bearing wheels support smooth rolling movement, while the spare wheel mounted in its steel holder strengthens the authentic commercial-trailer look. Age 14+ marks the recommended age. The trailer can also be expanded with separately available accessories, including a conversion kit with functional aluminium side walls for building-material transport.

1:14 3-Axle Flatbed Trailer III, trailer
1:14 3-Axle Fliegl Megarunner, trailer kit

Models & trailers

1:14 3-Axle Fliegl Megarunner, trailer kit

500907235

€634.99

Curtain-side trailers shape the look of modern road freight, and the 1:14 3-Axle Fliegl Megarunner brings that transport character into a detailed model-building project. The assembly kit captures the long, low stance of a European semi-trailer with a 995 mm length, a 195 mm height and a red curtain body that stands out clearly beside the white front and rear sections. The build centres on a laser-cut steel frame, steel front wall and 3-axle layout, creating a technical structure with the layered detail that model-building enthusiasts look for in workshop sessions. Along the sides, the curtain body is tensioned with multiple fasteners, while the rear section uses opening doors with a 270° hinge layout for a more authentic trailer finish. Half-round mudguards, a single-arm steel spare wheel carrier and aluminium underride protection add the kind of hardware normally seen underneath full-size transport equipment. The rear bumper carries a laser-cut Fliegl logo, and the wide tyres with chromed rims complete the road-going stance with a bright contrast against the darker chassis parts. On a shelf, in a depot scene or coupled to a 1:14 tractor unit, the trailer adds a strong logistics presence through its triple-axle proportions and curtain-side bodywork. The kit format makes the construction itself part of the appeal, with the manual included for step-by-step assembly.  Warning! Not suitable for children under 14 years.

1:14 3-Axle Fliegl Megarunner, trailer kit
1:14 3-Axle Low Loader, trailer, gooseneck

Models & trailers

1:14 3-Axle Low Loader, trailer, gooseneck

500907700

€849.99

Heavy-haul trailers are defined by their proportions, and this 1:14 3-axle low loader captures that look with a long low-bed platform, a stepped gooseneck front section and a rear triple-axle group. The red frame, wood-look centre deck and black running strips create the technical contrast seen on full-size transport equipment, whether the trailer is coupled to a matching tractor unit or shown as a standalone workshop build. The construction goes beyond a simple shell. The manual shows 6 wheel assemblies with ball bearings, a multi-part frame with cross members in 74 mm and 81 mm lengths, and deck sections that lock into place across the chassis. Rear details such as warning boards, mudflaps, lights, hazard markings and LONG VEHICLE graphics build the road-going character of the model. The trailer also supports optional upgrades including a spindle drive gearbox motor, a control switch for the lifting mechanism, LED tail light boards, rectangular lights and an orange flashing beacon. On a finished 1:14 truck combination, the low central bed suits scale transport scenes with construction machines, agricultural vehicles or other oversized loads. The long deck and realistic rear section also make the model a strong centrepiece for shelf display, depot layouts and heavy-transport dioramas. Required separately are a gearbox motor for the lifting device and a control switch for manual lifting.  Warning! Not suitable for children under 14 years.

1:14 3-Axle Low Loader, trailer, gooseneck
1:14 3-Axle Semi-Trailer Ver.III, trailer

Models & trailers

1:14 3-Axle Semi-Trailer Ver.III, trailer

500907792

€689.99

The 1:14 3-Axle Semi-Trailer Ver.III recreates the long, enclosed form of a box trailer with a white body, red chassis and a detailed 3-axle layout that gives a truck combination a convincing road-going presence. Extended support legs at the front let the trailer stand detached, while the wide rear opening sets up loading scenes with the doors swung fully outward. Details across the chassis and body focus on the hardware that defines a working trailer. The side panels use a screwed sandwich-look construction, and the semi-circular mudguards frame the rear wheel area with a clean commercial-vehicle profile. At the back, an aluminum rear bumper carries 7-section taillights for a technical finish that matches the transport theme. A steel spare wheel holder with spare wheel adds another workshop-style detail to the underframe, and the manually adjustable aluminum trailer support legs underline the functional character of the model. Combined with a compatible 1:14 tractor unit, the trailer suits realistic freight setups, depot scenes and road-train display builds. Open rear doors, visible cargo space and the multi-axle chassis also make it a strong centrepiece for transport layouts focused on loading bays, yard parking and long-haul combinations. Age 14 years+  Warning! Not suitable for children under 14 years.

1:14 3-Axle Semi-Trailer Ver.III, trailer
1:14 3-Axle Stanchion Trailer, logging trailer

Models & trailers

1:14 3-Axle Stanchion Trailer, logging trailer

500907629

€599.99

Built around a 1:14 scale and a 3-axle layout, this stanchion trailer brings the look of a dedicated timber hauler into a detailed model format. The red chassis, silver stanchions and black fenders create the unmistakable profile of a forestry transport trailer, with the long frame set up to carry elongated loads such as logs or poles in a convincing road-going arrangement. The structure develops through a multi-stage build with 6 wheel assemblies, ball bearings in the wheel hubs and 3 axle units mounted beneath the frame. The suspension uses a new design, and the axle build includes a choice between normal height and a raised +8 mm position. Dummy air suspension details add another layer of scale realism around the running gear. Side underrun guards, a rear bumper, rear light details and a front holder with front plate shape the trailer into a complete heavy-transport subject rather than a simple rolling chassis. On the bench or coupled into a 1:14 truck setup, the trailer suits display scenes centered on forestry, construction or long-load transport. Support legs hold the trailer upright when parked, while the front bulkhead and paired stanchions define the loading zones clearly for a purposeful finished look.

1:14 3-Axle Stanchion Trailer, logging trailer
1:14 3-Chamber Taillight PCB, RC lighting set

RC truck accessories

1:14 3-Chamber Taillight PCB, RC lighting set

500907679

€80.99

Compact rear lighting adds a sharper scale finish to 1:14 vehicle builds, and this 3-chamber taillight PCB set brings that detail into a small round format. With dimensions of 11 x 7.5 mm, the units suit model bodies and rear sections where lighting needs to stay visually balanced instead of overpowering the build. The PCB layout combines 3 light functions in each taillight: rear light, indicator and brake light. That function mix supports more lifelike signalling on trucks, trailers and custom conversions, while the round housing shape fits classic rear-end styling on many commercial vehicle projects. The set is designed for an input voltage of 7.2-12 V DC, making it suitable for RC electrical systems within that range. For model-building enthusiasts, this adds a focused electronics upgrade that contributes visible function as well as scale character. Installed on a 1:14 rig, the taillights help complete the rear view during workshop builds, restoration-style projects or detailed road-going truck scenes. The set is not compatible with TAMIYA MFC-01/03, so it is best matched with other suitable lighting layouts and custom electronics setups.

1:14 3-Chamber Taillight PCB, RC lighting set
1:14 3Axle Trailer Chassis Ver.III, trailer

Models & trailers

1:14 3Axle Trailer Chassis Ver.III, trailer

500907730

€389.99

The 1:14 3Axle Trailer Chassis Ver.III captures the look of a heavy road trailer in a format shaped for model-building enthusiasts. Its laser-cut steel construction uses 3 mm and 1 mm sections, creating a rigid base chassis that suits custom builds and gives larger trailer bodies a defined structural foundation. The 3-axle layout brings the long proportions of a transport trailer into a scale setup that looks convincing behind a truck tractor. A new trailer suspension system is part of the chassis design, and the included +8 mm elevation option allows the running height to be adapted to the planned structure above. Wide chromed wheels with ball bearings and wide tyres underline the technical look while supporting smooth rolling movement. At the rear, an aluminium bumper with 7-section taillights adds another recognisable truck detail. The steel spare wheel holder with spare wheel extends the workshop-style equipment, while the semi-circular mudguards shape the wheel area with a clean trailer silhouette. As a basic trailer chassis for individual structures, this version leaves room for flatbed, transport or specialist body concepts built around the frame. On a shelf, in a workshop setting or coupled to a matching 1:14 tractor unit, the long red chassis and detailed under-run protection create a strong heavy-haul presence.

1:14 3Axle Trailer Chassis Ver.III, trailer
1:14 4-in-1 LED Distrib.Board, model accessory

RC truck accessories

1:14 4-in-1 LED Distrib.Board, model accessory

500907805

€9.99

Lighting details often define the final character of a scale build, and this 1:14 4-in-1 LED Distrib.Board is made to bring order to that stage of the setup. With 10 outputs on one board, it creates a central connection point for several LED positions within a 1:14 model and supports a tidier internal layout than separate loose branches. The board is designed as a model accessory in the Carson Modelsport range and focuses on the practical side of adding electronics to a build. Its 4-in-1 distribution concept helps separate and organise multiple light connections when a cab, body or chassis carries more than one lighting point. That makes it useful for projects where front, rear or additional marker lights need a defined place in the wiring plan. The compact board format also suits hobby work where available installation space inside a scale model is limited and every connection needs a clear route. In workshop use, the board fits naturally into the finishing phase of a 1:14 build or an upgrade of an existing model. Minimum age 14 years is stated for this accessory, matching hobby projects that combine scale detailing with electronic equipment.

1:14 4-in-1 LED Distrib.Board, model accessory
1:14 4-section Trailer Taillight, model accessory

Basic accessories

1:14 4-section Trailer Taillight, model accessory

500907262

€15.99

A 4-section taillight layout is a small detail with a strong effect on the look of a scale trailer, and this 1:14 set focuses exactly on that rear-end finish. The set is built around 2 taillight units and matching coloured inserts, giving model builders a clear route to a more defined lighting arrangement on compatible trailer projects. The parts shown for this accessory include red, orange and clear lens elements, allowing the different sections of the taillight to be represented with the right colour separation instead of a single uniform piece. The rectangular format and segmented front face suit the visual language commonly used on trailer rear assemblies in scale form. Because the set is dedicated to 1:14 use, it fits naturally into model scenes where proportions matter and small exterior details shape the overall impression. Age marking: 14 Years. On workshop builds, restoration tasks or visual upgrades, these taillights can be used to refresh an older trailer body or complete a new rear frame with a more convincing scale finish. They also suit hobby benches where body details, marker layouts and rear-end styling are handled with the same care as the main chassis and running gear.

1:14 4-section Trailer Taillight, model accessory
1:14 Air Horn-Set MB Actros, model accessory

Basic accessories

1:14 Air Horn-Set MB Actros, model accessory

500907161

€39.99

Air horns are a defining detail on many show trucks, and this 1:14 Air Horn-Set MB Actros brings that familiar look to a scale build with 2 trumpet-style horn units in chrome brass. The long tubes, flared bell openings and compact bracket mounts create a clean visual match for truck-focused detailing work. Each horn is shaped as a separate component, making the set suitable for adding roof-mounted or exterior trim accents to an MB Actros model in 1:14 scale. The chrome brass finish gives the parts a reflective metallic appearance that stands out against painted cab surfaces and other exterior fittings. Visible screw-mounted brackets beneath the horns provide defined attachment points, which helps keep placement precise during a custom build or restoration project. As a model accessory rather than a complete vehicle, the set focuses on visual realism through scale-correct form and material presence. On a shelf display, in a workshop scene or as part of a truck conversion, the horn pair adds a recognisable finishing touch to the upper bodywork. The set also suits replacement use when an existing build needs fresh exterior detailing for a more complete Actros look.

1:14 Air Horn-Set MB Actros, model accessory
1:14 Air Horn-Set, model accessory, brass

Basic accessories

1:14 Air Horn-Set, model accessory, brass

500907096

€29.49

Air horns are a defining visual cue on classic truck builds, and this 1:14 Air Horn-Set adds that detail with 2 clarions in different lengths. The set uses brass with a nickel-plated finish, creating a bright metallic look that suits scale cabs, roof bars and custom bodywork. The combination of 1 long and 1 short clarion opens up more authentic detailing than a matched pair alone, especially on builds that follow full-size truck styling. Brass gives the parts a precise formed shape, while the nickel-plated surface adds the chrome-style appearance often used for exterior trim. Mounting parts are included for fitting, and the drill template provides a practical guide for positioning the holes before installation. That makes the set useful both for fresh projects and for upgrading an existing 1:14 truck with a more finished exterior layout. On a shelf, the horn set sharpens the silhouette of the cab with a recognisable heavy-truck detail. In a workshop build, it adds a focused finishing step that complements paint, lighting and other scale accessories without changing the base character of the model.

1:14 Air Horn-Set, model accessory, brass
1:14 Air Suspension Bellow, spare part, hard

Basic accessories

1:14 Air Suspension Bellow, spare part, hard

500907358

€6.99

In 1:14 scale model work, the smallest suspension parts often decide how cleanly a repair or rebuild comes together. This Air Suspension Bellow set provides 2 hard bellows with dimensions of 20 x 18 mm for model applications that call for this exact format. The stated hard specification makes this pair suitable where a firmer component is needed within the suspension area, while the 20 x 18 mm size gives a concrete reference for fit planning before installation. As a dedicated spare part rather than a general accessory, the set is aimed at targeted maintenance, replacement work and parts matching in existing 1:14 model assemblies. The 2-piece format also supports jobs that require a matched pair instead of a single replacement. Whether the task is restoring a used chassis, replacing worn suspension elements or keeping key workshop spares on hand for future service, this set stays focused on one clearly defined function. For model-building enthusiasts, that kind of exact component choice helps keep repair work organised and scale-specific.

1:14 Air Suspension Bellow, spare part, hard
1:14 Air-suspen. bellow, model accessory

Basic accessories

1:14 Air-suspen. bellow, model accessory

500907357

€6.99

Air suspension details play a defining role in the look of a scale truck chassis, and this 1:14 air-suspen. bellow set adds that compact technical touch with 2 soft bellows sized at 20 x 18 mm. The pair is suited to model-building work where suspension areas need a matching replacement part or a scale-focused finishing element. The soft construction supports fitting on compatible assemblies where a more flexible part is required. With 2 matching bellows in the set, the format works well for axle or chassis detailing on 1:14 builds that use air suspension styling cues. The stated 20 x 18 mm size gives a concrete reference when comparing existing installed parts or planning a new layout around available mounting space. As a model supplies component, the set fits naturally into repair work, parts organisation and custom project preparation without taking up much room in the workshop. On an in-progress truck build, the bellows can be used to refine visible chassis sections with a more technical scale appearance. For maintenance or replacement work, the pair offers a straightforward way to swap worn compatible parts while keeping dimensions aligned with the rest of the assembly.

1:14 Air-suspen. bellow, model accessory
1:14 Alum. 2-Speed Transfer-gearbox, gearbox

Basic accessories

1:14 Alum. 2-Speed Transfer-gearbox, gearbox

500907266

€249.99

A 2-speed transfer gearbox is one of the defining mechanical elements in a scale truck drivetrain, and this 1:14 version brings that function into a compact aluminium assembly. The silver housing, black output couplers and visible hex fasteners create a technical look that fits naturally into detailed workshop-style builds. The gearbox uses a central housing with mounting flanges for installation into a matching chassis, while the shaft outputs connect rotational force onward through the drivetrain. The product data also identifies an automatic diff lock and self-locking function, adding a distinct mechanical characteristic to the unit. Separate hardware is supplied for fitting, including screws, a hex nut and coupling parts shown alongside the main assembly. An optional servo mount for 2-speed transfer gearbox is referenced in the documentation, indicating compatibility with a shifting setup where the wider build calls for it. In a 1:14 model project, this assembly suits builders working on scale commercial vehicles or other detailed RC driveline layouts. It works as a focused upgrade or replacement component where the drivetrain needs a dedicated transfer stage with compact metal construction and clearly defined mounting points.

1:14 Alum. 2-Speed Transfer-gearbox, gearbox
1:14 Alum. Cylinder mount GH, model part

Basic accessories

1:14 Alum. Cylinder mount GH, model part

500907476

€46.99

This 1:14 aluminium cylinder mount GH set brings machined metal hardware into detailed model work with a compact 2-piece mounting solution for compatible assemblies. The silver finish and precisely cut shapes give the parts a technical look that fits naturally into workshop-style rebuilds, upgrades and maintenance on scale vehicles. Each mount is formed as a fork-style bracket with several circular mounting holes, creating different attachment positions within the assembly. That layout supports careful placement of pins, pivots or linked components where alignment matters. The set is intended for model supplies use rather than as a standalone vehicle component, making it a practical choice when an existing build calls for replacement hardware or a metal alternative to standard fittings. The aluminium construction adds a crisp machined appearance, while the GH designation keeps the part identifiable within a parts-based setup. On the bench, the set suits hobby tasks such as refreshing worn mounting points, adapting a custom mechanical layout or preparing a scale model for further detailing. Age marking: 14 Years. Batteries are not included.  Warning! Not suitable for children under 14 years.

1:14 Alum. Cylinder mount GH, model part
1:14 Alum. Fr. wide wheel, wheel rims

Tyres & rims

1:14 Alum. Fr. wide wheel, wheel rims

500907412

€74.99

These 1:14 aluminium front wide wheel rims are built for model-building enthusiasts who want a more defined wheel setup on compatible RC vehicles. The 2-piece set uses a hex mount and is intended for the front axle, combining a technical fit with a machined metal look that suits detailed scale builds. The rim design shown here pairs a silver finish with oval ventilation-style cutouts, a black centre section and visible bolt detailing around the hub area. That combination gives the wheel face a purposeful appearance often sought for truck, crawler or workshop-style conversions. As replacement or upgrade parts, the rims can refresh a worn front end or shift the visual character of a build toward a more mechanical, scale-focused look. The 1:14 scale keeps the proportions in line with matching model platforms, while the wide format changes the visual presence at the front axle. On the bench, these rims suit rebuilds, parts swaps and detail-led custom projects where the wheel design matters as much as the body style. Age marking: 14 Years. No batteries required.

1:14 Alum. Fr. wide wheel, wheel rims
1:14 Alum. Low Loader, wheel set, twin-wheel

Tyres & rims

1:14 Alum. Low Loader, wheel set, twin-wheel

500907136

€50.99

Low loader trailers rely on their wheel setup for much of their character, and this 1:14 aluminium twin-wheel set brings that scale detail into focus with a distinctly technical look. The machined metal rims, grooved outer profile and separate hub caps create the kind of hardware-led finish that suits detailed trailer builds and replacement work alike. Each rim shows a deep recessed centre with circular bolt holes, giving the assembly a realistic mounting pattern and a purposeful visual depth. The twin-wheel configuration is shaped for low loader applications, where paired wheels are part of the recognisable trailer layout. The silver metal finish and grey centre caps create a clear contrast across the wheel face, so the hub area stands out cleanly once fitted. With 2 hub caps included, the set provides the centre-cover detail needed for a more complete axle appearance. In workshop use, the set suits fresh trailer projects, visual upgrades, or replacing worn wheel hardware on compatible 1:14 models. Age marking: 14 Years. The compact component format also makes it a practical choice when a build calls for scale-correct wheel detailing without changing the overall trailer concept.

1:14 Alum. Low Loader, wheel set, twin-wheel
1:14 Alum. Ramp hinge GH, model spare part

Basic accessories

1:14 Alum. Ramp hinge GH, model spare part

500907475

€30.99

In 1:14 scale builds, small hardware parts shape how moving sections sit and operate. The Alum. Ramp hinge GH supplies a compact metal hinge component for model assemblies that need a clean, defined pivot point on a ramp, flap or linked section. The part uses a long flat bar layout with 2 countersunk outer holes for screw mounting and a central double-lug section with circular through-holes for the mechanical connection. That geometry supports a flush fit at the mounting surface while leaving space for a pin, bolt or axle through the lower tabs. The silver aluminium construction and machined finish give the component a technical appearance that suits exposed installation on detailed truck or trailer builds. With 2 pieces included, matching left and right mounting positions or a direct replacement pair can be equipped in one pack. This spare part fits hobby work where worn hardware needs replacement or a custom model section calls for a compact hinge layout. On workshop benches and during rebuilds, the defined hole positions and simple bracket form support accurate integration into compatible 1:14 model projects.  Warning! Not suitable for children under 14 years.

1:14 Alum. Ramp hinge GH, model spare part
1:14 Alum. Rear wheel, model accessory, hex

Tyres & rims

1:14 Alum. Rear wheel, model accessory, hex

500907352

€114.99

A 1:14 scale wheel upgrade changes the whole stance of a model, and this aluminium rear wheel set brings that effect straight to the axle area with a bright metal finish and a distinctly technical look. The long-hole design and hex layout give custom truck or trailer projects a more defined rear wheel section with visible machined detail. The set is built around 2 rear wheels and is intended as a model accessory rather than a complete vehicle. The aluminium construction adds a solid metal appearance that suits workshop builds, display-focused projects, and scale conversions where the wheel area needs more visual depth. The rear wheel format concentrates the detailing where twin or dedicated rear axle setups draw the eye most strongly. The shaped openings create a purposeful rim face, while the separate hex components support installation on compatible model axles. Age marking: 14 Years. On a shelf, in a diorama, or as part of an RC truck rebuild, these wheel parts shift the look from standard running gear toward a more customised scale finish. They also suit enthusiasts refining an existing 1:14 chassis with more prominent metal wheel detail at the rear.

1:14 Alum. Rear wheel, model accessory, hex
1:14 Alum. Trailer Bumper Rear, trailer part

Basic accessories

1:14 Alum. Trailer Bumper Rear, trailer part

500907361

€24.99

A rear bumper is one of the details that gives a scale trailer its finished outline, and this 1:14 aluminium version brings that technical look to the back end of the model. The set is designed as a trailer accessory and uses 2 metal components with a long, straight form for a clean, purposeful rear section. The assembly combines a flat mounting plate with a shaped channel piece, creating a structured layout rather than a single strip. Several pre-drilled fixing points are worked into the aluminium parts, including round holes and elongated slots. That hole pattern supports aligned mounting and leaves room for positional adjustment during fitting. The silver-coloured metal surface suits workshop-style trailer builds and blends naturally with other scale hardware on 1:14 assemblies. In a detailed truck and trailer project, the rear section often defines the final visual impression as strongly as the side rails or chassis details. This accessory fits that stage of the build with a compact, model-focused part that adds a crisp mechanical finish to the trailer end. The 14 Years age marking is stated in the product data.

1:14 Alum. Trailer Bumper Rear, trailer part
1:14 Alum. Trailer Coupling SAF, model accessory

Basic accessories

1:14 Alum. Trailer Coupling SAF, model accessory

500907155

€99.99

Commercial trailers rely on a secure fifth-wheel connection, and this 1:14 Alum. Trailer Coupling SAF brings that characteristic detail into a truck model with a compact metal assembly and a distinctly technical layout. The aluminium construction, twin mounting rails and central coupling section create the look of a working rear chassis area that stands out on a workshop bench or in a finished road-haulage display. The assembly is shaped for installation on a compatible 1:14 model frame, with elongated mounting sections and fixing holes that support careful positioning within the chassis. Black contact pads on the upper section add visual contrast to the silver metal finish, while the central locking area gives the part the appearance of a realistic trailer interface. In detailed truck projects, components like the coupling help define the character of the rear platform, especially when the frame, mudguards and running gear are already in place. The SAF styling adds a recognisable commercial-vehicle reference without overwhelming the rest of the build. On a shelf, in a diorama or as part of a working truck conversion, the coupling adds a focused scale detail that strengthens the overall impression of the model. Age 14 Years. For model-building enthusiasts, it brings an authentic truck element into the chassis and supports a more complete heavy-haul scene.

1:14 Alum. Trailer Coupling SAF, model accessory
1:14 Alum. Transfer-gearbox Tipper 6x6, gearbox

Basic accessories

1:14 Alum. Transfer-gearbox Tipper 6x6, gearbox

500907610

€169.99

A 6x6 truck layout depends on a drivetrain that can pass power cleanly through more than one axle line, and this 1:14 Alum. Transfer-gearbox Tipper 6x6 is built around exactly that task. The aluminium construction and transfer-gearbox format place it firmly in the technical side of scale model building, where mechanical function shapes the whole vehicle concept. The unit is intended for 1:14 scale use and belongs to the models supplies category, making it a focused choice for builders working on truck driveline systems rather than body accessories or decorative parts. Its transfer-gearbox design indicates a central role between the incoming drive and the connected axle shafts. The compact casing combines a formed housing with mounting points for installation into a chassis layout. The visible shaft connections support integration with rotating driveline parts in a multi-axle configuration. In workshop use, this component fits projects that need a replacement gearbox, a custom 6x6 conversion, or a more detailed truck transmission layout. Age 14 Years. It suits hobby builds where the mechanical structure remains visible in the planning stage and where each drivetrain part contributes to a realistic scale engineering setup.

1:14 Alum. Transfer-gearbox Tipper 6x6, gearbox
1:14 Alum. Underrun Protection, truck accessory

Basic accessories

1:14 Alum. Underrun Protection, truck accessory

500907181

€34.49

On full-size trucks, underrun protection is part of the functional rear structure, and in 1:14 scale it adds the same purposeful finish to a detailed model. This aluminium underrun protection is made for 1:14 truck projects and brings a clear commercial-vehicle character to the rear section. The assembly combines a long metal crossbar with 2 angled bracket sections, creating a defined structural part rather than a loose collection of fittings. The mirrored bracket plates feature several drilled holes for fastening, which supports accurate positioning during installation on a compatible model. The aluminium construction gives the part a crisp technical appearance that suits scale truck builds with exposed chassis details and visible rear equipment. As a dedicated accessory in the Models & Accessories range, it also fits naturally into restoration work where worn or missing rear hardware needs replacement. In workshop-style build sessions, the part can be used to refine a custom truck layout or restore a model to a more complete rear-end setup. It also adds a more convincing finish in display settings where the frame, rear cross area and underbody details remain visible from low viewing angles.

1:14 Alum. Underrun Protection, truck accessory
1:14 Aluminium Front Wheel Hubs, Model Part

Tyres & rims

1:14 Aluminium Front Wheel Hubs, Model Part

500907278

€74.99

Built for 1:14 model applications, these aluminium front wheel hubs bring a focused replacement part into the running gear where fit and connection matter most. The set contains 2 round hubs with a hex design, intended for the front wheel area and shaped for wide wheel layouts. The aluminium construction gives this component a clear mechanical role within the axle assembly, while the round hub form and hex interface define how the wheel mount connects into the drivetrain area. As a pair, the hubs suit maintenance work when existing parts show wear or when a front axle setup is being refreshed with matching replacement components. The wide wheel specification points to a broader hub profile, which matters where the chassis layout depends on the correct wheel seating and axle geometry. In workshop use, these hubs fit naturally into repair benches, parts boxes and ongoing rebuild projects for 1:14 vehicles. They also suit routine servicing where the front axle hardware needs a like-for-like exchange rather than a general universal part.

1:14 Aluminium Front Wheel Hubs, Model Part
1:14 Aluminum Warning Sign, model accessory

Basic accessories

1:14 Aluminum Warning Sign, model accessory

500907448

€29.99

High-visibility warning panels are a familiar sight on transport and service vehicles, and this 1:14 accessory brings that look into model form with a compact aluminum warning sign and matching striped decal. The red and white diagonal marking gives scale builds a recognisable rear detail that fits utility, haulage, and work-focused scenes. The aluminum parts shown for the set include 2 mirrored mounting brackets, each with a long slotted arm and a plate section for fastening. That slot shape allows the position to be adjusted during fitting, which helps when lining the sign up with bodywork or another mounting point on the model. The decal carries the classic diagonal stripe pattern used for warning visibility, adding a crisp graphic finish once applied. Together, the metal brackets and decal create a small but distinctive scale detail that changes the character of a build from plain bodywork to a more purpose-led vehicle setup. On a shelf, in a workshop scene, or as part of a running model with service-vehicle styling, the sign adds a clear finishing touch without dominating the rest of the build. The 1:14 scale keeps it in proportion for matching model projects, and the separate bracket pieces support a neat left and right installation layout.

1:14 Aluminum Warning Sign, model accessory
1:14 Angle Eyes Hella, model lights, white

Electronics

1:14 Angle Eyes Hella, model lights, white

500907574

€52.99

Auxiliary lamps are a small detail with a big effect on a scale truck, and this 1:14 Angle Eyes Hella set brings that workshop-style finishing touch in a compact 2-piece format. The round lamps combine a white light look with chrome-look housings and separate mounting brackets, creating a front-end accent that fits naturally into detailed vehicle builds. The set is specified for 7.2 V and 12 V systems, with long black cables attached to each lamp for wired installation. That layout supports clean routing through the body or chassis area and leaves room for custom placement where the lighting concept of the model needs it. The round shape, reflective finish and bracketed base suit classic auxiliary-light positions such as bumpers, roof sections or other scale mounting points supported by the build. As a matched pair, the lamps help maintain a consistent left and right layout instead of mixing different light styles across the vehicle. In a workshop build, show truck project or detailed shelf model, these lamps add a recognisable Hella-style visual cue without changing the overall character of the vehicle. The 1:14 scale focus keeps the proportions aligned with larger truck models, while the wired format gives hobbyists scope to integrate lighting as part of a more individual setup.

1:14 Angle Eyes Hella, model lights, white
1:14 Angle Eyes LED PCB, model accessory

Electronics

1:14 Angle Eyes LED PCB, model accessory

500907555

€34.49

Angle Eyes lighting is a familiar styling cue in full-size vehicle culture, and this 1:14 LED set translates that look into a compact model-building format. The white SMD LED PCB is designed for 7.2 V and 12 V systems and brings a defined illuminated ring effect to compatible scale vehicle front ends. The set is built around compact light modules, fine connection cables and mounting parts shown in the included contents. That layout supports installation in tight body sections where larger lighting components would take up too much space. In a 1:14 build, the small-format PCB helps add lighting detail without overwhelming the proportions of the model. The white LED output suits headlamp styling with a clear, technical look, while the wiring layout supports connection into an existing compatible electrical setup. Mounted behind the front light area, the LEDs add a more defined visual signature when the model is on display, on a shelf, or integrated into a running vehicle project. Age marking: 14 years and up. A compatible model and a suitable power connection are required separately.

1:14 Angle Eyes LED PCB, model accessory
1:14 Angle Eyes, LED set, blue SMD PCB

Electronics

1:14 Angle Eyes, LED set, blue SMD PCB

500907554

€34.49

Blue Angle Eyes lighting brings a sharper custom look to 1:14 scale vehicle builds, with SMD LED PCB technology designed for operation on 7.2 V or 12 V systems. The set is aimed at model-building enthusiasts who want to add a clear lighting accent to a compatible project and extend the visual detail of the front end beyond the standard body finish. The compact electronic layout suits installations where space is limited around the body shell or light area, and the wired modules support placement within a scale build without dominating the visible structure. Blue illumination creates a defined styling effect that stands out in workshop displays, shelf presentation, or running sessions under lower ambient light. As a dedicated accessory from the models and accessories range, the set fits naturally into hobby projects that combine body detailing, electronics, and scale-focused finishing work. Age 14 Years. In a truck or other 1:14 model project, the lighting can be used to refine a custom road setup, add a more technical visual signature, or support a display-focused build with extra electronic detail. The set also works well for enthusiasts planning a fresh rebuild or updating an existing compatible model with a new lighting element.

1:14 Angle Eyes, LED set, blue SMD PCB
1:14 Angle Eyes, model light set, 7.2/12V

Electronics

1:14 Angle Eyes, model light set, 7.2/12V

500907573

€52.99

Angle Eyes lighting brings a sharper front-end signature to 1:14 model builds, with 2 round lamps designed for 7.2 V and 12 V operation. The white light effect suits scale truck projects that need a clear visual accent at the front, while the Hella-style form gives the setup a recognisable workshop and road-going look. Each lamp is connected by cable, which supports custom installation on bumpers, roof bars or other mounting points where extra lighting detail is wanted. The round housings keep the appearance consistent across both sides of the model, and the 2-piece format helps create a balanced layout rather than a single offset light source. On display shelves, in workshop scenes or during driving sessions, the lighting set adds a more technical finish to the bodywork without changing the core character of the build. The set suits hobby projects for ages 14 years and up and works well where scale detailing matters as much as driving action. Whether fitted to a road truck, a show build or a custom conversion, these lamps add a compact lighting element that strengthens the model's presence through shape, wiring and light effect.

1:14 Angle Eyes, model light set, 7.2/12V
1:14 Angle Eyes, model lights, blue Hella

Electronics

1:14 Angle Eyes, model lights, blue Hella

500907572

€52.99

Blue Angle Eyes bring a distinctive Hella-style lighting look to 1:14 model vehicles, combining round lamp bodies, chrome-look housings and blue accents in a compact 2-piece set. Designed for 7.2 V and 12 V systems, the wired layout supports installation on compatible builds where added front lighting is part of the visual setup. Each lamp is fitted with a mounting bracket and attached cable, giving the set the hardware needed for fixed placement on the model. The round format suits classic auxiliary-light styling, while the reflective housing adds a crisp technical finish that stands out on truck fronts, bumpers or roof bars where scale detailing matters. With 2 matching lamps in the set, the lighting arrangement stays visually balanced across the vehicle. On workshop-style custom builds, the pair adds a clear styling accent before the model heads onto the shelf or into driving sessions. On detailed road trucks and show builds, the blue Angle Eyes effect works as a focused visual upgrade that strengthens the scale character of the finished vehicle.

1:14 Angle Eyes, model lights, blue Hella
1:14 Arocs Cab Locking Device, model accessory

Basic accessories

1:14 Arocs Cab Locking Device, model accessory

500907590

€37.49

Truck models in 1:14 scale gain extra workshop character with this aluminium Arocs Cab locking device. The component is designed as a dedicated model accessory and adds a defined locking element to the cab area, giving scale truck builds a more technical rear-chassis appearance. Its aluminium construction brings a crisp metal finish that stands out against painted body sections and darker chassis parts. In detailed truck assemblies, a visible locking mechanism helps the cab section read more like a working vehicle layout rather than a simplified shell. The Arocs designation keeps the part tied to a specific model theme, while the compact accessory format leaves room for individual build planning and custom installation choices within a 1:14 setup. As a model supplies part within the Carson range, it fits naturally into projects that focus on realistic hardware details rather than broad cosmetic changes. On a shelf, in a workshop-style display, or as part of an active truck build, this cab locking device adds a small but noticeable engineering accent. The 14+ age marking places it within hobby-oriented model projects where scale detail and component choice shape the finished result.

1:14 Arocs Cab Locking Device, model accessory
1:14 Arocs Headlight, LED PCB, model accessory

Electronics

1:14 Arocs Headlight, LED PCB, model accessory

500907596

€70.99

The Mercedes-Benz Arocs is known on full-size roads and construction routes for its strong, purposeful front-end design, and that character carries neatly into this 1:14 lighting upgrade. The 1:14 7.2 V LED-PCB Arocs Headlight set adds a model-specific light arrangement with 2 mirrored electronic modules shaped for the left and right sides. Each module uses a compact PCB with visible mounting points, integrated light positions and attached wiring, creating a structured solution for fitting illumination into the front section of a compatible Arocs model. In addition to the main board-mounted LEDs, each side includes a separate wired LED element, expanding the lighting layout beyond a single light point. The mirrored construction helps keep the installation aligned with the vehicle's front geometry rather than relying on a universal board shape. The 7.2 V specification matches common model truck electrical setups and gives hobby builders a clear voltage reference for planning the installation. On a workshop bench, the paired boards suit careful detailing work around the cab front and headlight area. Once fitted, the left and right arrangement supports a more complete scale appearance for display, diorama scenes or running sessions with a compatible 1:14 truck model.

1:14 Arocs Headlight, LED PCB, model accessory
1:14 Arocs Mainplate Batt Hold, model accessory

Basic accessories

1:14 Arocs Mainplate Batt Hold, model accessory

500907591

€69.99

This 1:14 Arocs accessory brings 2 central chassis elements together in one aluminium set: a mainplate and a battery holder shaped for scale truck building work. In a model workshop setting, that combination supports a tidy foundation for rebuilds, replacements and ongoing project maintenance around the battery area. The designation names the Arocs platform and the 1:14 scale directly, making this part relevant for scale truck assemblies that need a matching structural component rather than a generic hardware substitute. Aluminium gives the set a metal construction that suits technical model layouts where the mainplate forms part of the core structure and the battery holder sits as a dedicated support element. As a model accessory within the Models & Accessories and Models Supplies range, it fits naturally into repair stock, upgrade planning and parts-led rebuild work. On the bench, this set suits damaged-part replacement, fresh chassis builds and detailed restoration tasks where a correct main section and battery mount are needed together. The 14 years and up marking places it in the hobby segment, where scale truck enthusiasts often work through fitting, alignment and component changes as part of the build process.

1:14 Arocs Mainplate Batt Hold, model accessory
1:14 Arocs Tip LED-PCB Taillight, model accessory

Electronics

1:14 Arocs Tip LED-PCB Taillight, model accessory

500907616

€40.99

The Mercedes-Benz Arocs is a familiar sight in modern construction transport, and this 1:14 LED-PCB taillight set brings that working-truck character into a scale model with functional rear lighting. Designed as an Arocs Tip taillight accessory, the set includes 2 PCB units arranged as a left and right pair for a balanced rear-end layout. Each board works within an operating voltage range of 7.2 V to 12 V, which suits compatible model truck electrical systems used in hobby builds and upgrades. The lighting functions cover indicator left-right, driving light, brake light and reversing light, so the rear section can reflect several typical road-going signals through dedicated light points. The black carrier plates provide a compact base for the light elements, while the attached wiring looms are already fixed to each unit for connection into the model's electronics. Age 14 Years. Installed on a 1:14 tipper truck, the pair adds technical detail that stands out both on the workbench and during driving sessions. The mirrored arrangement suits rear body mounting on opposite sides, helping the finished model present a more complete truck look in motion and at rest.

1:14 Arocs Tip LED-PCB Taillight, model accessory
1:14 Auxiliary Head Lamp, accessory, 5 mm mount

Basic accessories

1:14 Auxiliary Head Lamp, accessory, 5 mm mount

500907052

€15.79

Auxiliary lamps are a classic detail on working trucks and construction machines, where extra lighting shapes the vehicle's character as much as its function. This 1:14 accessory set brings that look into scale form with 2 round auxiliary head lamps designed for model customising. Each lamp is built for mounting on a lamp frame and uses a 5 mm mount, giving the set a clear fitting reference for compatible scale projects. The round form and chrome-finished housing create a bright metallic contrast that reads cleanly against painted bodywork, bars and front assemblies. Alongside the 2 lamps, the set provides 2 blue and 2 white glasses, so the final appearance can be matched to the chosen build theme or visual setup. The paired layout also supports symmetrical placement across a front bar or roof-mounted frame. In workshop-style truck builds, construction models or other 1:14 vehicle projects, the set adds a compact styling detail that helps complete the front section with a more purposeful scale look. The parts suit hobbyists who refine body details, update lamp frames or add visual accents during a custom build.

1:14 Auxiliary Head Lamp, accessory, 5 mm mount
1:14 Auxiliary Head Lamp, model accessory

Basic accessories

1:14 Auxiliary Head Lamp, model accessory

500907575

€14.99

Auxiliary lamps are a small detail with a strong visual effect, and this 1:14 scale set brings that effect to model trucks and other compatible vehicle builds. The set contains 2 auxiliary head lamps with a 4 mm mount, giving hobbyists a compact lighting detail for front-end customisation on scale projects marked 14 Years and up. The round housings and clear lenses create the look of classic add-on driving lamps, making them a natural match for bumpers, roof bars, or other exposed mounting points where extra front detail matters. The 4 mm mount gives a defined fixing size for planning placement on a build or replacing existing lamps on a model already in use. As a dedicated accessory in the Models & Accessories range, this set focuses on exterior detailing rather than a full conversion, which keeps the upgrade targeted and easy to integrate into an existing 1:14 project. On display models, the pair helps complete the front view with symmetrical lamp placement and a more purposeful scale appearance. On working builds, the compact format suits hobbyists refining a truck, service vehicle, or custom body with period-style auxiliary equipment.

1:14 Auxiliary Head Lamp, model accessory
1:14 Ceresit CM90 Easy Pallet, scale model

Basic accessories

1:14 Ceresit CM90 Easy Pallet, scale model

500907617

€21.99

This 1:14 scale pallet with Ceresit CM90 Easy brings the look of transport-ready building supplies into model scenes with a clearly branded cargo format and a compact freight presence. The stacked load and wrapped finish create the visual image of a delivery that has just reached a depot, warehouse bay or construction site. The miniature load is based on a EUR pallet format and carries repeated Ceresit CM90 markings across the visible faces, which helps the accessory read clearly from different viewing angles. Transparent wrap around the stacked boxes gives the cargo a secured storage and handling appearance rather than a loose display stack. That distinction matters in dioramas built around logistics, site supply or commercial transport, where the state of the load shapes the whole scene. The pallet form also pairs naturally with 1:14 trucks, trailers, forklifts and loading zones in model layouts. Placed beside a loading ramp, inside a warehouse setting or on the bed of a scale transport vehicle, the pallet adds a specific construction-material reference instead of a generic cargo block. The compact format suits static displays as well as scene building, where a single freight unit can sharpen the industrial character of the overall layout. The 14 Years age marking identifies it as a hobby accessory for model-focused setups.

1:14 Ceresit CM90 Easy Pallet, scale model
1:14 Chrome Bumper MB 1838/1850, truck part

RC truck accessories

1:14 Chrome Bumper MB 1838/1850, truck part

500013511

€12.49

Classic truck styling often comes down to the front details, and this 1:14 Chrome Bumper MB 1838/1850 adds a bright plated accent to compatible model builds. Designed as an accessory for Mercedes Benz truck models 56305 and 56307 from Tamiya, it brings the specified MB 1838/1850 look to the front section in a format matched to 1:14 scale projects. The bumper is made from chromed material and focuses on exterior appearance rather than a generic replacement look. Its shaped front profile and integrated mounting points are intended for the named compatible truck models, which keeps the fitment use clearly defined in the product data. The included fixing hardware consists of 2 black screws, giving the set the essential parts needed for installation. As a model accessory in the Models Supplies range, it suits detail-focused truck projects where the front end finish plays a visible role in the overall build. On a workshop bench, the plated surface adds contrast against painted cab parts and darker chassis components. In a display setting or as part of an active RC truck build, the bumper helps complete the characteristic road-truck appearance associated with the MB 1838/1850 designation.

1:14 Chrome Bumper MB 1838/1850, truck part
1:14 Clearance Lights, model accessory, 2pcs

RC truck accessories

1:14 Clearance Lights, model accessory, 2pcs

500907806

€11.49

Marker lights are a small detail with a strong effect on the finished look of a scale vehicle, and this 1:14 clearance light set brings that effect into model builds with a red and white 2-piece layout. The compact format suits focused detailing work on truck and trailer bodies where visible light points help define the lines of the model. The set is listed as a model accessory and is aimed at hobbyists from 14 years. Red and white light elements open up classic placement options on body edges, upper sections or rearward areas, depending on the build concept and the styling of the vehicle. Because the pack contains 2 pieces, the set works well for selective upgrades rather than broad full-body outfitting. That makes it a useful choice for custom projects, replacement work or finishing touches on a scale body that still needs clearly placed marker-light details. On the workbench, the accessory can be integrated into truck, trailer or other 1:14 modelling projects where small exterior parts shape the overall impression. In display use or during driving sessions, the added light housings help the bodywork read with more scale definition and a more complete road-going look.

1:14 Clearance Lights, model accessory, 2pcs
1:14 Control platform, accessory

Basic accessories

1:14 Control platform, accessory

500907365

€63.99

The 1:14 Control platform adds a functional industrial element to compatible model vehicle and construction layouts. Guard rails run around all sides of the rectangular deck, while a small front ladder defines the access point and gives the platform the look of a real working attachment. Across the floor, evenly spaced round holes create a perforated deck pattern that sharpens the technical character of the platform. Upright corner posts and horizontal rails shape a clearly enclosed standing area, while the underside carries triangular support brackets and circular cutouts that bring extra depth to the construction. The metallic silver finish underlines the workshop and site-equipment style, so the platform holds its visual presence both mounted on a model and placed within a display scene. In construction, maintenance or service-themed arrangements, the platform expands the range of realistic setup options around 1:14 vehicles and machinery. It also adds convincing structure for close viewing, where the ladder, rail geometry and underbody detailing become part of the overall scale impression.

1:14 Control platform, accessory
1:14 Day Running Light Actros 2/3 Axle

RC truck accessories

1:14 Day Running Light Actros 2/3 Axle

500907677

€65.99

The MB Actros remains one of the defining shapes in modern long-haul trucking, and this 1:14 daytime running light set brings that road-going character into a scale build with a model-specific front lighting detail. Made for MB Actros 2/3 Axle models, the set focuses on the visual signature at the front end and adds a cleaner, more technical look to the truck body. The accessory is designed as a paired lighting set with wired left and right units, matching the mirrored layout needed for the vehicle front. Its 7.2 to 12 V/DC input range gives clear electrical guidance for integration into compatible RC truck systems. The compact housings are shaped for installation as dedicated light components rather than as generic decoration, which makes the set especially relevant for builders refining the appearance of an existing model or replacing front lighting parts with the correct format. On a workshop bench, during a rebuild, or as part of a scale detailing session, this lighting set adds a focused upgrade to the MB Actros 2/3 Axle platform. It suits display-oriented finishing as well as active RC truck projects where the front-end layout matters as much as the driving setup.

1:14 Day Running Light Actros 2/3 Axle
1:14 Draw Tube Pole Trailer, model accessory

RC truck accessories

1:14 Draw Tube Pole Trailer, model accessory

500907733

€89.99

This 1:14 Draw Tube Pole Trailer accessory set brings a functional trailer detail into model-building projects with a long cylindrical draw tube, a rectangular silver housing section and an angled mounting plate with 4 round holes and 2 elongated slots. The layout reads as a dedicated add-on for scale truck or trailer work, with each part focused on mounting, alignment and visible structure rather than decoration alone. Alongside the main tube section, the set includes 2 small silver detail parts, a black bracket and a bag of black and silver screws for the fitting work. The combination of slotted and round mounting points supports careful positioning during assembly, while the separate hardware keeps the installation tied to the mechanical character of the build. A red transparent 2-part light piece and a clear lens frame extend the set beyond the structural section, adding a realistic rear-end detail that complements the metallic-looking components. 14 Years is the stated age marking. On a workshop bench, the parts suit upgrade, replacement or custom trailer projects where a scale-correct extension section matters as much as the finished look. Assembly time is stated in minutes, and batteries are not included.

1:14 Draw Tube Pole Trailer, model accessory
1:14 Driven Front Axle, RC truck axle, diff lock

Basic accessories

1:14 Driven Front Axle, RC truck axle, diff lock

500907267

€234.99

Heavy truck drivetrains rely on the front axle to turn steering input into controlled movement, and this 1:14 Driven Front Axle brings that mechanical character into a scale RC truck build. Designed for TAMIYA trucks or vehicles with a 62 mm frame width, the assembly adds a driven front end with auto differential lock and a clearly defined fit reference for compatible chassis. The axle unit combines a central differential housing, steering linkage and wheel-end assemblies in one detailed mechanical module. Instruction data names ball bearings in 5x11x4 mm and 5x9x3 mm sizes, along with washers, pins, O-rings and mounting hardware that support the internal rotating parts and axle-end setup. The documentation also shows configuration options for versions with or without through-drive, allowing the axle layout to match the intended drivetrain arrangement. A front mounting set is referenced for installation, and the ZF mark shown in the assembly material adds a real-world engineering cue to the finished truck. In a workshop-style build, the axle becomes a focal point where steering hardware, drivetrain parts and chassis mounting come together in visible mechanical detail. Once installed beneath a 1:14 truck frame, it suits scale road tractors, construction trucks and other heavy vehicle projects that call for a driven front axle layout.

1:14 Driven Front Axle, RC truck axle, diff lock
1:14 Driver Cab Locking Device, model accessory

Basic accessories

1:14 Driver Cab Locking Device, model accessory

500907156

€38.99

A driver cab locking device adds a functional mechanical detail to 1:14 scale truck projects, with an aluminium assembly that brings a realistic latch-style action into the model. The compact unit combines a shaped lever arm, angled support frame, pivot hardware and a horizontal tension spring, creating a technical look that suits exposed chassis and cab areas. The mechanism is built around guided movement: the lever arm actuates the linkage, while the spring returns the assembly to its resting position. Machined cutouts in the frame reduce visual bulk and underline the engineered character of the part. Black hex socket screws and multiple mounting points reinforce the workshop-style appearance that model-building enthusiasts often look for in functional upgrades. As a dedicated accessory rather than a decorative add-on, the assembly supports cab sections that need a defined locking or release action within a scale build. In a detailed 1:14 truck workshop scene, the metal linkage adds visible function alongside the bodywork and interior structure. It also suits conversion projects where a plain fixed cab is being reworked with a more mechanical opening and closing setup for display or hobby use.

1:14 Driver Cab Locking Device, model accessory
1:14 Dump Trailer 2/3 Axle, model kit

Models & trailers

1:14 Dump Trailer 2/3 Axle, model kit

500907050

€619.99

Built for model truck scenes with real working character, this 1:14 dump trailer model kit brings the look of a construction-site semi-trailer into a detailed three-axle format. The combination of a CNC-milled aluminium chassis, reinforced PVC basin and back wall, and a lightened licence plate mount gives the trailer a technical, workshop-style finish that suits display builds and active driving alike. The running gear uses GFK suspension with horizontal rods, 12 ball-bearings, 6 wide rims and 6 wide tyres with a width of 25 mm and an outer diameter of 82 mm. Air-spring dummies with screw springs add another layer of scale detail to the undercarriage, while plastic fenders with mounts frame the wheel setup cleanly. The aluminium underbody protection and the CNC-milled support construction continue the metal-focused build, and the mechanically adjustable trailer supports add a functional detail at standstill. With a length of 700 mm, width of 185 mm, height of 235 mm and a weight of 4,600 g, the trailer has substantial presence in a 1:14 truck setup. For unloading scenes, the basin can be equipped with a separately available dump mechanism. A spindle drive, motor, battery and switch are required separately. Once fitted, the raised basin and automatic rear locking create a convincing loading and unloading sequence for sand, gravel or stone in construction layouts, quarry scenes or truck meeting displays.

1:14 Dump Trailer 2/3 Axle, model kit
1:14 Euro-Pallet-Set, model accessory, 4 pieces

Basic accessories

1:14 Euro-Pallet-Set, model accessory, 4 pieces

500907094

€8.99

The Euro pallet is one of the defining elements of modern freight handling, and this 1:14 set brings that familiar format into model scenes with a compact, workshop-ready scale presence. Each pallet is shaped to echo the classic full-size design, adding a recognisable logistics detail to trucks, depots and loading areas. The set contains 4 pallets, each measuring 93 x 62 x 14 mm. The formed structure recreates the look of a wooden Euro pallet while using a moulded construction with a wood-like surface appearance. Open side entry spaces and the slatted top layout reflect the handling pattern associated with the original pallet format, which helps the accessory sit naturally in transport, warehouse or industrial dioramas. The matching dimensions across all 4 pieces also support a consistent scene layout when several loading points are arranged together. Placed on a trailer bed, beside a loading ramp or in a storage area, the pallets add scale reference and visual structure to freight-focused model setups. They also suit construction, farming and workshop scenes where cargo handling details help complete the overall setting. Age marking: 14 years+

1:14 Euro-Pallet-Set, model accessory, 4 pieces
1:14 Euro-Pallet-Set, model accessory, 5 pcs

Basic accessories

1:14 Euro-Pallet-Set, model accessory, 5 pcs

500907049

€7.79

Freight details often define whether a 1:14 transport layout looks staged or convincingly in service. This Euro-Pallet-Set brings that warehouse and loading-yard character into model scenes with 5 beige pallets sized for 1:14 use and shaped in the familiar Euro pallet format. The set is suitable for Tamiya trucks and Carson trailers, making it a straightforward addition to existing transport combinations, depot layouts and cargo displays. The pallet form supports classic loading arrangements on trailer beds, at ramps or in storage areas, and the repeated 5-piece format helps build a more complete freight scene than a single cargo part can achieve. The beige finish gives the pallets a natural, workmanlike appearance that blends well into logistics, warehouse and industrial model settings without overpowering the vehicle itself. Whether arranged as stacked freight, placed individually on a trailer, or used to structure a loading zone, the pallets add scale reference and scene depth to transport models. Age 14 Years. The scope of delivery includes 5 items.

1:14 Euro-Pallet-Set, model accessory, 5 pcs
1:14 Flatbed Underride Guard, accessory, 190 mm

Basic accessories

1:14 Flatbed Underride Guard, accessory, 190 mm

500907078

€39.99

Scale truck builds gain a sharper technical finish with this 1:14 flatbed underride guard in aluminium. The 190 mm part is made for model builders who want to extend the rear underbody detail of a trailer with a component that matches the look of metal chassis hardware and flatbed structures. As a dedicated accessory for 1:14 flatbed projects, the guard suits custom builds, visual upgrades and restoration work on existing trailer layouts. The aluminium construction brings a distinct metallic surface that works naturally with silver frame sections, crossmembers and other exposed undercarriage elements often seen on scale transport models. Its narrow, linear form gives the rear section a more defined outline and supports a tidier transition across the underside of the trailer. For hobby workbench planning, the stated 190 mm width provides a clear reference when matching the part to the proportions of a chosen build. The part fits especially well into workshop sessions focused on scale realism, where underbody components matter as much as the deck or side panels. On a finished flatbed model, it adds visible structure to the rear area and strengthens the overall impression of a carefully specified transport trailer.

1:14 Flatbed Underride Guard, accessory, 190 mm
1:14 Fliegl Stone Master, tipper trailer

Models & trailers

1:14 Fliegl Stone Master, tipper trailer

500907216

€749.99

Current half-pipe tippers are defined by fast unloading and a hard-working silhouette, and the 1:14 Fliegl Stone Master brings that character into a detailed 3-axle trailer kit. The licensed model combines a steel chassis frame with a steel tipper body and rear wall, creating a substantial build with the long, purposeful proportions of a site trailer. The chassis uses laser-cut and laser-welded 1 mm and 3 mm steel parts, while the tipper and hatch door are formed from 2 mm steel with a CNC-bent profile. Across the running gear, 12 ball bearings sit inside the 6 wheel assemblies for smooth rolling action. The trailer suspension is detailed with air spring dummies, and the rear section carries a 7-section taillight layout, a licence plate bracket and a square steel rear underride guard. Semi-circular mudguards, a king pin, an ABS operating platform and a hydraulic cylinder dummy add further scale detail without crowding the lines of the body. The 7-section rear light cluster can be electrically retrofitted. With dimensions of 700 x 185 x 250 mm and a load figure of up to 10 kg, the trailer has the size and carrying capacity to suit construction layouts, transport scenes and scale hauling setups. The body can be tipped and unloaded with the separately required tipping mechanism. A spindle drive, motor, battery and switch are required separately.  Warning! Not suitable for children under 14 years.

1:14 Fliegl Stone Master, tipper trailer
1:14 Frame Cover Panels 2-Axle Accessory

Basic accessories

1:14 Frame Cover Panels 2-Axle Accessory

500907180

€84.99

Frame cover panels bring a more complete scale look to the rear section of a 1:14 truck build. This 2-axle accessory is shaped for the chassis area behind the cab, where the frame, deck and coupling zone meet and remain clearly visible on many model truck layouts. Used in this exposed section, the panels help define the transition between the rear fenders, the fifth-wheel area and the surrounding chassis structure. That makes them a focused upgrade for model-building enthusiasts who want the mechanical layout to read with more visual order in parked display scenes and during driving sessions. The 1:14 scale keeps the detailing aligned with truck builds in this format, while the 2-axle specification keeps the application tied to the correct chassis configuration. The set works especially well on projects where the rear platform and coupling section are part of the visual character of the model. Combined with a tractor unit and trailer setup, the covered frame area supports a more finished appearance around the back end without changing the core layout of the truck. Age 14 years+

1:14 Frame Cover Panels 2-Axle Accessory
1:14 Frame Cover Panels 3-Axle, model accessory

Basic accessories

1:14 Frame Cover Panels 3-Axle, model accessory

500907255

€92.99

A 3-axle truck chassis gains a more finished scale look with these 1:14 Frame Cover Panels, shaped to dress the rear platform area with a metal checker-plate surface. The silver panel form brings the visual language of full-size truck catwalks into a model build, adding a technical detail that stands out around the fifth-wheel section and mudguard area. The panel is formed as a flat metal part with an irregular stepped outline, multiple round fixing holes and several cut sections that indicate its mounting role within a larger chassis assembly. That layout supports integration into detailed truck projects where the frame area is part of the overall visual impact, not just a structural base. The checker-plate pattern adds texture across the surface, giving the rear section a more authentic workshop and transport-truck character. In display builds, the metallic finish catches light differently from painted cab parts and helps break up large chassis surfaces with a functional, mechanical accent. This accessory suits hobby bench upgrades, custom 3-axle conversions and scale truck projects that focus on realistic rear-deck detailing. Combined with a tractor unit body, wheel arches and coupling area, the panel helps create a more complete heavy-haul look for static presentation or RC truck builds. Suitable for ages 14 years and up.

1:14 Frame Cover Panels 3-Axle, model accessory
1:14 Front Knuckle Arms, model accessory

Basic accessories

1:14 Front Knuckle Arms, model accessory

500530913

€37.99

In 1:14 truck building, the front end hardware shapes how the axle assembly comes together. These alloy front knuckle arms are made for Tamiya 1:14 models and supply 2 matched components for the left and right side of the steering layout. Each arm uses a machined metal construction with a silver finish and a mirrored form, so the pair corresponds to both sides of the front assembly. The cross-shaped body carries threaded mounting holes that support screw-based installation, while the protruding axle section provides the mounting point for the wheel hardware. This makes the set relevant both for repair work on worn front end parts and for planned rebuilds where the steering area is being refreshed with metal components. The compact format also suits parts storage in a workshop drawer or field box. During a rebuild, the pair can be fitted as part of a front axle service, or kept ready as replacement hardware for maintenance between driving sessions. The 2-piece set gives model-building enthusiasts a focused chassis component for keeping a 1:14 Tamiya truck ready for the next run.

1:14 Front Knuckle Arms, model accessory
1:14 Fulda Crossforce, off-road tires, 2-pack

Tyres & rims

1:14 Fulda Crossforce, off-road tires, 2-pack

500907011

€26.49

Loose dirt, uneven ground and rutted tracks call for a tire that can keep a model connected to the surface. The 1:14 Fulda Crossforce off-road tires are built for that role, with a terrain-focused design and flexible pneumatic construction that supports strong traction where hard-packed road rubber reaches its limit. This 2-piece set is intended for 1:14 models and is compatible with original Tamiya rims, so it fits naturally into repair work, rebuilds and running setup changes on matching vehicles. The flexible structure allows the tire to work with the ground rather than skimming across it, which helps the contact patch stay active over irregular terrain. That makes this set a useful choice when a model spends most of its time away from smooth surfaces and needs a tire shape aimed at off-road running rather than general road use. Whether the goal is replacing worn rubber before the next session or preparing a compatible chassis for rougher terrain, this pair adds a focused wheel setup for dirt routes and mixed ground. Age 14+

1:14 Fulda Crossforce, off-road tires, 2-pack
1:14 Fulda EcoControl Tire, truck tyre set

Tyres & rims

1:14 Fulda EcoControl Tire, truck tyre set

500907014

€26.49

The Fulda EcoControl Tire set brings full-size road-haulage character into 1:14 truck modelling with 2 drive-axle tyres shaped after the original Fulda road pattern. Sidewall lettering and the road-style tread give tractor units a more authentic EU look, whether the build is being refreshed or finished from scratch. Each tyre measures 80 mm in outer diameter, 40 mm in inner diameter and 19 mm in width, creating proportions that suit scale truck running gear without guesswork. The 1 mm profile depth keeps the road-tread look crisp and restrained, matching the appearance expected from highway-focused tractor units rather than off-road machinery. As a dedicated drive-axle version, this set is aimed at the rear axle area where matching tyre style has a strong effect on the finished truck's overall stance. Compatibility with all TAMIYA tractor units and TAMYIA and CARSON trailers opens up several workshop uses, from replacing worn tyres to aligning a tractor and trailer combination with the same road-going visual theme. In a parked display, the Fulda markings sharpen the scale impression; on a running model, the tyre dimensions support a clean, realistic look across the axle set.

1:14 Fulda EcoControl Tire, truck tyre set
1:14 Fulda Multitonn, tire set, wide 2-pack

Tyres & rims

1:14 Fulda Multitonn, tire set, wide 2-pack

500907012

€26.49

Heavy road transport styling carries straight into this 1:14 Fulda Multitonn tire set, built as a wide 2-piece replacement for model truck running gear. The flexible rubber construction combines a realistic road pattern with a contact surface shaped for traction and extended running life, giving workshop projects a functional spare for regular use. The set is intended for specific Carson-compatible wheel positions rather than as a universal fit. It suits the front axle rim 907013 and also fits the trailer rim 907026, which makes the pair useful when a truck build needs a direct replacement on the steering axle or a matching change on trailer wheels. The tread uses narrow longitudinal grooves and ribbed sections that visually suit road-going commercial vehicle models while supporting controlled rolling on smooth hobby surfaces. With 2 tires in the pack, the set covers one axle pair and keeps maintenance planning straightforward for larger articulated combinations. In the workshop, the pair suits rebuilds, wear replacement and detail-focused upgrades on 1:14 truck projects. Age marking: 14 years. For hobbyists maintaining a hauler, trailer or display-ready road rig, this set adds a scale-correct running component with defined fitment for compatible rims.

1:14 Fulda Multitonn, tire set, wide 2-pack
1:14 Goldhofer TU4, lowloader trailer, 4-axle

Models & trailers

1:14 Goldhofer TU4, lowloader trailer, 4-axle

500907400

€694.99

Heavy-haul lowloaders are built to move machinery that sits too tall or too heavy for a standard trailer, and the Goldhofer TU4 captures that purpose in a long 1:14 scale platform with a distinctly low deck and 4-axle layout. This kit uses laser-cut steel sheet parts to create the frame and structure, giving the model a technical build with the look of a real transport trailer. The deck is finished with wood supports that break up the steel construction with a realistic loading surface, while 16 ball-bearing wheels add a dense multi-axle stance under the chassis. At the rear, the support can be adjusted manually, and the one-piece ramps connect through a hinged mechanism that allows different loading positions. The underframe includes spacers, semicircular fenders and a pivoting bogie arrangement, adding more mechanical detail during assembly than a simple display trailer. Decals are included for markings and finishing touches, so the completed model carries the visual character of a working lowloader rather than a plain platform. Coupled behind a matching 1:14 tractor unit, the trailer suits workshop display, transport dioramas and scale loading scenes with construction or agricultural vehicles. Age 14 Years. Assembly instructions are included.  Warning! Not suitable for children under 14 years.

1:14 Goldhofer TU4, lowloader trailer, 4-axle
1:14 Goldhofer/SAF Low Loader Axle, trailer axle

Basic accessories

1:14 Goldhofer/SAF Low Loader Axle, trailer axle

500907140

€76.99

Heavy haul trailers depend on a convincing undercarriage, and this 1:14 Low Loader Axle Goldhofer/SAF brings that technical character into a scale build. The set is designed as a model assembly for trailer projects and centres on the axle and suspension area that defines the stance and mechanical look of a low loader. The layout shown in the set includes a straight axle, suspension bellows, trailing arms and multiple mounting parts that shape the underbody structure in a way that reads clearly on a finished model. Silver-toned metal elements sit alongside black moulded components, creating the visual contrast typical of working trailer hardware. Additional brackets, clamps, bushings and threaded pins expand the assembly beyond a single cross member and give the build more depth around the wheel and mounting zone. The included fasteners support a clean mechanical fit and suit hobby work that values visible construction detail. On a completed 1:14 transport trailer, the axle section adds substance to workshop scenes, display setups and road-going truck combinations. Age 14 Years. The set also suits enthusiasts who want to refine a trailer project with a component group that is usually seen close up, where suspension parts and mounting geometry make a clear difference to the final impression.

1:14 Goldhofer/SAF Low Loader Axle, trailer axle
1:14 John, driver figure, painted model

Basic accessories

1:14 John, driver figure, painted model

500907426

€24.99

A seated driver figure can change the whole impression of a scale scene, and John brings that effect into 1:14 layouts with a painted finish and a relaxed, ready-to-place pose. Bent arms, open hands and a natural seated posture give the figure a convincing presence in cabins, workshop corners or diorama settings where an empty seat would otherwise break the illusion. The 1:14 scale makes John a useful addition for model builders working on trucks, construction vehicles or display scenes that need a human reference point. The blue long-sleeve work shirt with light cuffs, dark trousers and black shoes create a practical everyday look rather than a costume-like appearance, which helps the figure sit comfortably across many different scene styles. Short black hair and a neutral facial expression keep the character flexible for varied settings. The painted surface also saves finishing work and allows the figure to move straight into a build or display. Placed in a cab, on a bench or beside a workshop setup, John helps a model scene feel inhabited and proportionally grounded. For enthusiasts refining a vehicle interior or building a full diorama, this figure adds a clear visual link between machine, setting and scale.  Warning! Not suitable for children under 14 years.

1:14 John, driver figure, painted model
1:14 King Pin Steel, model accessory, Tamiya

Basic accessories

1:14 King Pin Steel, model accessory, Tamiya

500907362

€7.99

In 1:14 scale truck building, the small fastening points often decide how cleanly a front-end assembly comes together. The King Pin Steel set is made for Tamiya-fit 1:14 applications and brings together the metal hardware needed for one king pin mounting point in a compact replacement or workshop part. The visible components are a long countersunk threaded screw, a flanged spacer with recessed centre and a matching hex nut. That combination supports a flush screw seat at the mounting surface while the spacer sets the part position and the nut secures the connection. Steel construction gives this hardware the material character expected for mechanical model assemblies, especially where steering or axle-related parts rely on accurate fit between fasteners and mounting holes. As a model accessory rather than a complete vehicle, it adds a focused solution for repair benches, spare-parts storage and ongoing scale truck projects. Whether used to replace worn hardware or to complete a fresh 1:14 build, this set fits naturally into detail-oriented assembly work. The compact format also makes it practical to keep on hand with workshop supplies for regular maintenance on Tamiya-fit truck models.

1:14 King Pin Steel, model accessory, Tamiya
1:14 LED Flashing Light, accessory, orange

Electronics

1:14 LED Flashing Light, accessory, orange

500907580

€58.99

A rotating beacon is one of the details that gives a 1:14 scale working vehicle its finished road-going character, and this orange LED Flashing Light brings that look into a compact accessory format. The light unit is designed for 1:14 models and combines a swivelling effect with programmable operation, making it a strong visual addition on truck cabs, municipal builds or service conversions. The programming options go beyond a single light pattern. Programs 1 to 6 cover rotation to the left or right at 40 ms, 70 ms and 200 ms, while programs 7 to 13 provide different flash modes. The polarity is defined in the leaflet with orange as positive and black as negative, giving a clear basis for installation. The mounting diagram specifies a 4.5 mm hole, and the included fitting parts are shown compensating for roof pitch so the beacon can be aligned on sloped roof sections. For operation above 9.6 V, the leaflet states that a resistor must be soldered into the positive cable. On a scale truck, recovery vehicle or site support build, the beacon adds a functional light signature that changes the whole roofline once fitted. Age 14 years+ is stated in the product data, making this accessory suitable for hobby-focused model setups and detailed custom projects.

1:14 LED Flashing Light, accessory, orange
1:14 LED Flashing Light, model accessory

Electronics

1:14 LED Flashing Light, model accessory

500907579

€53.99

This 1:14 LED flashing light set brings a compact lighting detail to compatible scale model projects with an orange upright design and wired connection parts. The assembly combines a small plug element with metal contact pins and attached leads, giving model builders a clear electrical component for installation into a larger vehicle setup. The included parts are arranged as a dedicated accessory for fitting, replacement or restoration work rather than as a standalone model. A yellow sprue frame holds the molded upright components, while the separate connector section provides the contact point for integration into the existing electronics of a compatible 1:14 build. The orange warning-light style makes the fitted result stand out clearly on service, utility or transport-themed model scenes where visible signal details shape the overall look. On the workbench, this accessory suits projects that need a defined upright beacon element or a fresh replacement for worn lighting parts. In a finished scale vehicle, the compact format supports neat installation without overwhelming the proportions of a 1:14 model. Age 14 Years.

1:14 LED Flashing Light, model accessory
1:14 LED Light-Set TRUCK, light kit

Light & sound

1:14 LED Light-Set TRUCK, light kit

500906166

€25.99

The 1:14 LED Light-Set TRUCK brings working vehicle-style lighting to model truck builds with a compact control unit and multiple LED outputs. Front indicators, rear indicators, front lights, rear lights, brake lights and reverse lights can be simulated through the module, so the model shows different light functions instead of a single constant glow. The unit operates on 4-6 V DC and draws a maximum of 210 mA. Its FUTABA plug system is compatible with TAMIYA models, and the connection layout links the module with receiver channels CH1 and CH2 as well as the steering servo and speed controller. The lighting setup uses 3 mm LEDs for the front and rear indicators plus the reverse lights, while the front lights, rear lights and brake lights use 5 mm LEDs. A demo mode starts when the transmitter is switched off, allowing the lighting functions to be shown without active driving input. With dimensions of 42 x 32 x 13 mm and a weight of 44 g, the module fits neatly into many 1:14 truck installations where electronics space is limited. The set suits hobby builds that aim for more detailed road-truck behaviour, whether the model is being wired for workshop installation, display preparation or running sessions on the course.  Warning! Not suitable for children under 14 years.

1:14 LED Light-Set TRUCK, light kit
1:14 LED-PCB MAN Headlight, model accessory

Electronics

1:14 LED-PCB MAN Headlight, model accessory

500907391

€70.99

Truck lighting is one of the details that gives a 1:14 scale build its finished road-going character, and this 7.2 V LED-PCB MAN Headlight set focuses that effect on the front end. The set consists of 2 mirrored circuit boards with mounted LEDs, long twisted wire harnesses and separate outer lamp leads, forming a matched left and right arrangement for compatible MAN model projects. The PCB layout carries several light components in different sizes, with copper traces and pre-mounted electronics that concentrate the headlight functions on compact boards. The wired design supports installation within a model body while keeping the light points positioned at the front where the headlight units belong. As an accessory in the Models & Accessories range, it fits naturally into detail work, repairs or lighting upgrades where electronic components are part of the visible build substance. In a workshop setting, the paired boards suit a truck build that needs a defined front lighting layout rather than a generic light source. On a finished shelf model or a running RC truck, the left-right board set and separate lamp leads help create a more complete MAN front-end appearance.

1:14 LED-PCB MAN Headlight, model accessory
1:14 LED-PCB Taillight, model accessory, 7.2V

Electronics

1:14 LED-PCB Taillight, model accessory, 7.2V

500907385

€57.99

Rear lighting is one of the details that gives a scale truck build its finished road-going character, and this 1:14 LED-PCB taillight brings that function into a compact electronic module. The board is specified for 7.2V systems and uses a 6-section taillight layout that suits model projects where the rear end needs a defined light signature rather than a plain single-lamp look. The set shown in the product data consists of 2 green printed circuit boards, each fitted with attached multicolour cables for connection work inside the model. Visible solder pads and printed traces point to a purpose-built lighting component rather than a decorative shell part, making it relevant for repair benches, replacement jobs and detailed custom builds. The rectangular PCB format with mounting holes near the ends supports practical installation on compatible model applications where a fixed rear light board is needed. In a workshop context, this kind of part fits ongoing maintenance just as well as a fresh scale project. It can be used when an existing rear light module needs replacement or when a 1:14 vehicle is being equipped with a more defined taillight arrangement based on a 7.2V electrical setup.

1:14 LED-PCB Taillight, model accessory, 7.2V
1:14 Lift Axle, conversion kit, trailer upgrade

RC truck accessories

1:14 Lift Axle, conversion kit, trailer upgrade

500907734

€99.99

A lift axle is a defining detail on many full-size trailers, and this 1:14 conversion kit brings that function into a scale workshop project for CARSON 3-axle trailers of the II and III generation. Built for one trailer axle with dummy air suspension, the set converts it into a working lift system with a clearly visible axle movement of about 6 mm. The mechanism is driven by a digital servo and uses an aluminum servo mount, an aluminum servo horn, new mounting brackets, air bellows and mounts, plus a steel lift mechanism to create the lifting action. Mounting hardware is included for the installation. A suitable servo with at least 10 kg torque is required separately; comparable dimensions are 40 x 20 x 38 mm. The kit is compatible with Fliegl Megarunner, Stake trailer III, Flatbed trailer III, Trailer chassis III, Building materials trailer III, Box trailer III, and all 2nd generation trailers. Installation in tipper models is not possible. On a finished trailer, the raised axle changes the stance in a way that looks closer to a working road-going combination. In the workshop phase, the conversion adds a focused mechanical upgrade that suits model-building enthusiasts who enjoy functional trailer details as much as the final appearance.

1:14 Lift Axle, conversion kit, trailer upgrade
1:14 Lifted-Suspension Kit, model accessory

Basic accessories

1:14 Lifted-Suspension Kit, model accessory

500907618

€42.99

The 1:14 Lifted-Suspension Kit +8 mm 3A.T.T adds a clear chassis conversion to a 1:14 model setup, shifting the vehicle profile upward with a measured +8 mm lift. Silver metal plates, connector straps and spacers give the assembly a technical workshop look that suits scale truck projects with visible hardware details. The set is built around 2 large trapezoid side plates with multiple drilled holes, 4 narrow connector straps, 2 square reinforcement plates, 4 cylindrical threaded spacers, 4 black screws and 4 hex nuts. This combination creates a defined mounting structure rather than a cosmetic add-on, with each hardware group serving the suspension conversion itself. The drilled hole pattern supports attachment at fixed points, while the spacers establish the added height within the assembly. The metal parts also bring a crisp mechanical finish that matches the functional character of a lift modification. On a display shelf or within an active 3A.T.T build, the +8 mm conversion changes the visual stance and opens up new scope for detail-focused custom work. The age marking of 14 years and up places the kit in the hobby field, where model builders can combine scale presence and hands-on mechanical assembly in one focused upgrade.

1:14 Lifted-Suspension Kit, model accessory
1:14 Lifted-Suspension Kit, model accessory

Basic accessories

1:14 Lifted-Suspension Kit, model accessory

500907452

€34.99

A raised chassis setup can change how a scale truck sits and moves on the course, and this 1:14 Lifted-Suspension Kit brings that change into a compact tuning upgrade. The conversion is made for compatible 2A.T.T model applications and adds 8 mm of lift, giving the suspension geometry a visibly taller stance. The set includes a large slotted metal plate, 2 square metal plates, 2 curved connector plates, 4 long screws, 4 threaded fittings, 4 short screws and matching hex nuts. The elongated cutouts in the main plate allow the mounting position to be aligned during installation, while the threaded fittings and paired hardware create the connection points needed for the lifted setup. As a model accessory, this is a workshop-focused add-on rather than a ready-to-run vehicle. Batteries are not included. On shelf tracks, diorama builds or running areas with uneven transitions, the extra 8 mm can help a compatible 1:14 chassis clear edges and surface changes with a taller suspension layout. The hardware-based conversion also suits rebuilds, maintenance sessions and tuning projects where ride height is part of the setup.  Warning! Not suitable for children under 14 years.

1:14 Lifted-Suspension Kit, model accessory
1:14 Light Case Clear, model accessory, universal

Electronics

1:14 Light Case Clear, model accessory, universal

500907256

€26.49

Lighting details shape the character of a scale vehicle, and this 1:14 Light Case Clear set adds that crisp lamp finish with 2 transparent lens units in a universal format. The clear design suits model-building enthusiasts who want to refine a body shell, replace worn light parts or prepare a custom lighting layout on a 1:14 project. The set is intended for models and accessories work rather than as a complete vehicle system, making it a practical choice for workshop stock, rebuilds and visual upgrades. The universal specification supports use across different 1:14 applications where the chosen build calls for clear lamp covers. In body conversion work, transparent light cases help preserve the defined shape of the lamp area while leaving the final installation concept open to the builder. That makes the set useful both for fresh custom projects and for restoring scale details on an existing model. On a truck build, a service vehicle conversion or another 1:14 scale scene, the 2 matching light cases create a consistent look across the front or rear lamp positions. The compact accessory format fits naturally into hobby bench routines where replacement parts, finishing details and scale accuracy all matter.

1:14 Light Case Clear, model accessory, universal
1:14 Lowloader Tire-set, model accessory, 4 pcs

Tyres & rims

1:14 Lowloader Tire-set, model accessory, 4 pcs

500907583

€26.49

A lowloader only looks complete when the running gear matches the rest of the build, and this 1:14 tyre set supplies 4 replacement tyres for that exact task. The black rubber finish and fine block-pattern tread give the wheel area a technical, road-going character that suits detailed transport and trailer models. Each tyre is shaped as a dedicated accessory for 1:14 lowloader applications, making the set a practical choice for maintenance, restoration or visual refresh work on an existing model. The tread blocks create a defined outer surface rather than a plain slick look, which helps preserve the scale impression around the axles and mudguard area. With 4 tyres in the pack, the set covers a complete grouped wheel change where matching appearance matters across the vehicle. The smooth sidewalls keep the profile clean and focused on the tread pattern. On the workbench, the set fits naturally into spare-parts storage for ongoing model upkeep. During a rebuild or detail update, the 1:14 format keeps the tyre choice aligned with the scale of the lowloader, while the rubber material supports the realistic look expected in a transport model setup.  Warning! Not suitable for children under 14 years.

1:14 Lowloader Tire-set, model accessory, 4 pcs
1:14 M-B Arcos, top light holder accessory

Basic accessories

1:14 M-B Arcos, top light holder accessory

500907599

€71.99

Truck styling details often define the whole character of a scale build, and this 1:14 top light holder is shaped for an M-B Arcos project where roof lighting needs a dedicated mounting point. As a model supplies accessory, it adds a specific fitting instead of relying on a universal improvised bracket. The 1:14 scale keeps the part aligned with matching truck dimensions, while the M-B Arcos designation makes its intended application clear for builders working on that subject. Used on the upper cab area, the holder supports a more resolved lighting layout and a cleaner visual transition between the roof section and added lamps. That makes it useful in builds where the finishing stage matters as much as the running gear. The part can also help keep the light position consistent across a detailed truck body where symmetry and placement affect the final appearance. In a workshop setting, this accessory fits naturally into a body detailing session focused on truck customisation. It also suits display-oriented builds where roof lighting is part of the chosen look, giving the cab a more purposeful scale-truck presence. Age 14 years+  Warning! Not suitable for children under 14 years.

1:14 M-B Arcos, top light holder accessory
1:14 Mainplate Batt Hold, RC accessory, aluminum

Basic accessories

1:14 Mainplate Batt Hold, RC accessory, aluminum

500907593

€69.99

This 1:14 aluminum mainplate and battery holder is made for 2 axle and 3 axle RC truck builds, adding a defined chassis section for battery installation in detailed scale projects. The aluminum construction brings a precise, technical look that fits naturally into workshop-focused model building and truck conversions. As an 8-part accessory set, it supports a structured fitting process around the frame area rather than acting as a generic add-on. The mainplate forms the base for the battery holder, creating a dedicated position within the chassis where the drive battery can be mounted as part of the build layout. That makes it useful for model builders working on scale truck configurations where component placement, access and overall frame organisation matter during setup. The 1:14 scale format keeps the set aligned with matching truck dimensions, while the 2 axle and 3 axle compatibility broadens its use across different chassis concepts in the same scale class. On the bench, this accessory suits rebuilds, upgrades and fresh assemblies where the battery area needs a more defined structure. In running models, a clearly integrated battery position supports a neater overall chassis arrangement and a more purposeful technical finish.

1:14 Mainplate Batt Hold, RC accessory, aluminum
1:14 MAN TGX XLX, light holder, brass accessory

Basic accessories

1:14 MAN TGX XLX, light holder, brass accessory

500907095

€89.99

The MAN TGX series is a familiar sight in modern long-haul transport, and this 1:14 top light holder brings that road-truck character into a scale build with a compact metal detail. Designed for the MAN TGX XLX, the accessory combines a shaped bar with 4 polished lamps to create a more defined front-end look on a truck model. The part is made from brass and finished with nickel plating, giving the surface a bright metallic appearance that suits display-focused builds as well as running models. Each lamp can be illuminated, so the holder adds more than a visual accent when integrated into a lighting setup. The bar mounts individually on the frame, which keeps the placement clear and preserves the clean outline of the truck body. In a 1:14 project, details such as auxiliary lighting and metal trim help separate a standard build from a more personalised rig. On a workshop bench, the holder adds a focused upgrade during a custom build or refresh. In a finished truck scene, the polished lamp bar strengthens the scale look of the MAN TGX XLX whether the model is parked for display or prepared for the next driving session.

1:14 MAN TGX XLX, light holder, brass accessory
1:14 MAN TGX XLX, light holder, rear frame

Basic accessories

1:14 MAN TGX XLX, light holder, rear frame

500907124

€46.99

The MAN TGX series is a familiar sight in modern long-haul transport, and this 1:14 light holder brings that working-truck character onto the rear section of a scale cab. Designed for the MAN TGX XLX, the set adds a dedicated rear mounting point for auxiliary lighting and sharpens the technical look behind the driver's cab. The holder is made from brass with a nickel-plated surface, combining a precise metal frame with a bright finish that suits detailed truck builds. It can also be used as a holding frame on the cab rear panel, where the 2 chromium worklights create a clear, workshop-style lighting arrangement. Each lamp includes 2 clear lenses and 2 blue lenses, opening different styling directions for the rear section without changing the basic mounting concept. The lamp units are prepared for refitting with bulbs or LEDs, which makes the set suitable for builders planning a functional lighting conversion as part of a larger 1:14 truck project. On a shelf, in a workshop-themed diorama, or as part of an RC truck build, the frame adds visible structure to the rear wall of the cab. Age 14+

1:14 MAN TGX XLX, light holder, rear frame
1:14 MB Actros Gigasp. Top Light Holder

Basic accessories

1:14 MB Actros Gigasp. Top Light Holder

500907134

€96.99

The Mercedes-Benz Actros is one of the defining long-haul truck families on European roads, and the Gigaspace cab is known for its tall roof profile and distinctive upper section. This 1:14 MB Actros Gigasp. Top Light Holder translates that roofline detail into a dedicated scale accessory for truck modelling projects. Named as a top light holder and matched to the 1:14 scale, this part is shaped for MB Actros Gigasp. builds where the cab silhouette and roof equipment matter to the finished appearance. Rather than using a generic fitting, the model-specific designation keeps the accessory tied to the Actros Gigasp. form named in the data. Within a truck build, the upper cab area draws the eye quickly, so a dedicated holder helps define that section with a clearer, more intentional layout. The compact accessory format also makes it a focused addition for builders refining an existing model or planning a more detailed new project. On the bench, this kind of scale part suits cab customisation, restoration of a truck model, or completion of a subject-specific exterior setup. In a display line-up or during running sessions, the roof section gains a more resolved look that fits the 1:14 truck format and the MB Actros Gigasp. designation.

1:14 MB Actros Gigasp. Top Light Holder
1:14 MB Arocs Fuel Tank Mount, model accessory

Basic accessories

1:14 MB Arocs Fuel Tank Mount, model accessory

500907584

€18.99

The Mercedes-Benz Arocs is a familiar sight in heavy-duty transport, known for its angular cab design and work-focused road presence. This 1:14 aluminium fuel tank mount set brings that truck-specific detail into a model build with 2 dedicated mounting parts for the MB Arocs. The set is designed as a model accessory rather than a universal bracket pack, focusing on the fuel tank area of a 1:14 truck project. Aluminium construction gives the parts the crisp, technical look that suits scale commercial vehicle detailing, while the shaped brackets and fastening hardware support a clean integration with the matching layout. The 2-piece mount format concentrates on one defined installation point, which helps keep the build visually consistent with the Arocs theme. As an add-on for model supplies, it fits naturally into detail work where vehicle-specific hardware matters as much as the larger body components. On the bench, this set supports focused assembly sessions that add another layer of realism to a truck chassis. In a finished display or running model, the fuel tank mounting area gains the kind of functional-looking structure that strengthens the overall scale impression. Recommended age: 14 years +

1:14 MB Arocs Fuel Tank Mount, model accessory
1:14 MB Arocs/Actros 3A, frame cover, accessory

Basic accessories

1:14 MB Arocs/Actros 3A, frame cover, accessory

500907598

€63.99

Heavy-duty road trucks such as the Mercedes-Benz Arocs and Actros are defined by their exposed chassis sections as much as by the cab itself. This 1:14 frame cover is made for MB Arocs and Actros 3A model builds and adds a dedicated detail to that visible structural area. Used on the frame section, the cover helps complete the look of the truck around the rear chassis and supports a tidier transition between surrounding components. The 1:14 scale keeps the part in step with truck modelling projects built to that format, which matters when visible proportions and fitted details shape the overall impression. As a model accessory rather than a full vehicle, it focuses on one specific area of the build and gives that section a more resolved appearance. The designation names MB Arocs and Actros 3A directly, so the part is aimed at those corresponding model applications. The frame cover fits naturally into upgrade work, restoration of an existing truck model or a fresh custom build where the chassis area is meant to carry more visual depth. Age marking: 14 years.

1:14 MB Arocs/Actros 3A, frame cover, accessory
1:14 MB Headlight, LED PCB, model accessory

Electronics

1:14 MB Headlight, LED PCB, model accessory

500907558

€70.99

A 1:14 scale model gains a more defined front end with the MB Headlight LED-PCB set, built around 2 mirrored circuit board modules for 7.2 V lighting. The paired layout, compact green boards and attached LED elements give hobby projects a dedicated electronic headlight solution rather than a cosmetic body detail. Each side uses its own PCB module, creating a left-right arrangement that suits scale vehicle builds with separate front light positions. The boards carry mounted electronic components and pre-fitted wire leads in several colours, which helps keep polarity and routing distinguishable during installation. The 7.2 V specification anchors the set to model electrics that match this voltage, while the compact format leaves room for integration inside a detailed body or chassis area. As an accessory rather than a complete vehicle, the focus stays on functional lighting hardware for upgrades, repairs or project-specific conversions. In workshop use, the set fits naturally into custom 1:14 builds where front lighting is part of the finished look and electrical layout. It also suits replacement work on existing models that need matched headlight electronics on both sides.

1:14 MB Headlight, LED PCB, model accessory
1:14 MB Side-marker LED Set, model accessory

Electronics

1:14 MB Side-marker LED Set, model accessory

500907560

€17.99

Side-marker lights are a small detail with a big effect on a finished truck build, and this 1:14 MB Side-marker LED Set brings that scale look into compatible model projects with 2 light units for 7.2 V and 12 V setups. The compact lighting format and ready-made wiring make it a focused addition for builders refining exterior details on a model rather than changing its core mechanics. The set belongs to the models and accessories range and is intended as a lighting add-on for 1:14 scale applications. Long red and black leads are already attached, with small plugs and connector ends that support integration with existing model electronics. Black heat-shrink sections cover the wire junctions, helping keep the cable runs neat inside the bodywork or along the chassis. Because the set is built around side-marker lighting, it adds a realistic visual accent at the flanks of a truck body where illuminated details shape the finished appearance. On a workshop bench, the wiring can be planned as part of a custom truck build or a lighting upgrade on an existing 1:14 model. In a display setting, the illuminated side markers strengthen the road-going character of the vehicle, while on running models they extend the visual detail beyond the main headlight and rear light areas.

1:14 MB Side-marker LED Set, model accessory
1:14 MB Taillight, LED PCB, model accessory

Electronics

1:14 MB Taillight, LED PCB, model accessory

500907556

€35.99

This 1:14 LED PCB taillight assembly is built for model projects that call for a clear rear lighting setup and a compact electronic format. With a 7.2 V specification and MB taillight designation, the unit suits enthusiasts looking to refine a compatible build with dedicated illuminated detail. The set uses 2 small circuit boards rather than a single large light bar, which helps distribute the lighting elements across the rear section of a model. Attached multicolour wire leads support connection within the vehicle layout and give the assembly the character of a purpose-made lighting component rather than a decorative add-on. The PCB construction keeps the electronic paths defined on each board, while the pre-mounted light elements concentrate the function into a small installation footprint. In workshop use, the taillight assembly fits naturally into restoration jobs, spare-part replacement, or scale-focused customisation where rear light detail shapes the finished look. Age marking: 14 years and up. For model builders, it adds an electronic lighting element that can help a compatible vehicle body read more convincingly once installed.

1:14 MB Taillight, LED PCB, model accessory
1:14 Metal Front Axle, model part, steering

RC truck accessories

1:14 Metal Front Axle, model part, steering

500907801

€19.99

A front axle defines both the stance and the steering layout of a scale truck build, and this 1:14 metal front axle with steering linkage brings those two core elements together in one dedicated model part. The metal construction gives the assembly a clearly specified material base for workshop use, while the included linkage ties the axle directly to the steering function named in the designation. Within a 1:14 build, a front axle is more than a visual detail: it is the component group that shapes how the front end is assembled and how the steering hardware is organised. This version is supplied as a front axle with steering linkage rather than as an isolated single piece, which helps keep the relevant steering section together for replacement or planned parts work. The designation identifies it as a model supply within the models and accessories range, making it a focused choice for maintenance benches, rebuild projects or scale-oriented truck assemblies. The age marking is 14 Years. Whether the task is replacing a worn front-end assembly, preparing a fresh chassis project or refining a detailed 1:14 vehicle, this axle fits naturally into hands-on hobby work. It suits model-building enthusiasts who value clearly defined components and a steering assembly that is named upfront in the specification.

1:14 Metal Front Axle, model part, steering
1:14 MFC-TLS IR Low Loader, control unit

RC truck accessories

1:14 MFC-TLS IR Low Loader, control unit

500907710

€84.99

Built for 1:14 truck modelling, the MFC-TLS IR Low Loader control unit extends TAMIYA MFC-03/01 with infrared signal transfer to a matching trailer setup. The module sends lighting and auxiliary commands from the tractor unit to the trailer, creating a clean functional link for low loader combinations with steerable axles. Power is supplied via the receiver at 5-7.4 V/DC, so the module integrates into an existing radio-controlled electronics layout without a separate power source stated in the data. Rear light circuit boards for 3-chamber or 6-chamber taillights connect through screw terminals, and each of the 7 outputs supports loads of up to 500 mA. That layout also leaves room for additional lamps such as marker lights, roof lights or wind deflector lights, which are switched through the parking light function. The package contents include the MFC IR transmitter module, an IR transmitting diode and a 5-pin cable set. In a detailed truck and trailer build, the unit supports coordinated light behaviour and extra driven functions across the combination. The control paths also cover steering-related trailer functions, making it suitable for low loader setups where steerable axles add a more involved operating sequence. Recommended age: 14 years. The TLS low loader control unit 500907712 is optionally required for the trailer.

1:14 MFC-TLS IR Low Loader, control unit
1:14 Mounting Set Front Drive Axle, model part

Basic accessories

1:14 Mounting Set Front Drive Axle, model part

500907280

€75.99

A driven front axle changes both the look and the mechanical character of a 1:14 model, and this mounting set is made to support that conversion with dedicated installation parts. The set is specified for a 1:14 front drive axle and centres on the hardware needed to mount the axle assembly into the chassis layout. Visible components include 2 assembled leaf spring units, 2 angled metal brackets with slotted and round mounting holes, 2 cylindrical pins or spacers, 1 ball stud or post, 1 hex nut and 1 threaded rod. The instruction material also references 3 x 30 mm screws with 3 mm nuts and 3 x 8 mm screws with 3.2 mm washers and 3 mm nuts for the fastening steps around the axle and bracket structure. Slotted bracket holes allow the mounting points to be positioned during installation, while the spring packs create the suspension-style connection between axle and frame parts. The assembly drawings show the bars fixed across the axle housing and the mounted unit secured to the chassis base. In a workshop-style build, these parts support a front axle installation that looks mechanically convincing and matches the detailed character expected in 1:14 truck and construction models. The set suits hobbyists from 14 years who enjoy working through axle, bracket and linkage assembly with scale-focused hardware.

1:14 Mounting Set Front Drive Axle, model part
1:14 Mud Guard-Set, trailer accessory

Basic accessories

1:14 Mud Guard-Set, trailer accessory

500907068

€21.49

Built for semitrailer projects in 1:14 and 1:16 scale, the Mud Guard-Set brings a clear bodywork detail to dump trailer layouts. The 4-piece set is intended for wheel-area coverage and gives compatible trailer builds a more complete outer line around the axle section. Each mud guard measures 76 x 35 mm, which helps when checking the available space on a trailer chassis before installation. The parts are suited to dump trailer applications, where the wheel arch area benefits from defined coverage that matches the rest of the body structure. As an accessory for model-building enthusiasts, the set supports repair work, replacement of existing guards, or the finishing of a fresh semitrailer build with matching parts across several wheel positions. In workshop use, the set fits naturally into scale trailer projects that need consistent detailing around the running gear. It also suits rebuilds where worn or missing guards would interrupt the overall line of the semitrailer, restoring a cleaner and more coherent appearance.

1:14 Mud Guard-Set, trailer accessory
1:14 Pallet with Wuerth-Packings Accessory

Basic accessories

1:14 Pallet with Wuerth-Packings Accessory

500907620

€23.99

This 1:14 pallet with Wuerth-Packings brings the look of a prepared freight shipment into model logistics scenes. Stacked cartons, a euro pallet base, clear wrap and red straps combine into a compact accessory that reads instantly as warehouse cargo, whether placed beside a truck, on a loading dock or in a depot display. The printed Wuerth markings on the boxes give the load a distinct commercial character, while the visible EUR and DB pallet details echo the appearance of real transport units. The layered carton arrangement creates height and structure without needing extra loose parts, making the accessory easy to position in workshop, storage or delivery settings. At 1:14 scale, it fits naturally into layouts built around model trucks and freight environments, where cargo details help define the scene rather than leaving open space around the vehicle. Used on a trailer bed, next to a forklift area or as part of a warehouse corner, the pallet load adds a clear transport context to static displays and driving layouts alike. Age 14 Years

1:14 Pallet with Wuerth-Packings Accessory
1:14 Rear Bumper, trailer accessory, Euro

Basic accessories

1:14 Rear Bumper, trailer accessory, Euro

500907075

€89.99

Refrigerated road trailers are defined by the details at the rear, where doors, locking bars and bumper hardware create the unmistakable working-truck look. This 1:14 Rear Bumper for the Euro T-Reefer Semi-Tr. adds that characteristic finishing section to the back of the model with a metal construction and a clearly technical layout. The assembly is designed as a dedicated trailer accessory for 1:14 scale use and focuses on the lower rear area of the refrigerated semi-trailer. Red rear light units sit at the outer ends of the horizontal bar, while a central bracket and an upright mounting frame shape the structure in the middle. The visible fasteners and clamp-style mounting blocks reinforce the workshop-style appearance that suits detailed truck modelling. In combination with the rear door area, hinge detailing and locking hardware of the trailer body, the bumper section helps complete the proportions and visual balance of the model's tail. On a built semi-trailer, this accessory strengthens the realism of loading-bay scenes, road-train displays and scale transport line-ups. Age marking: 14 Years.

1:14 Rear Bumper, trailer accessory, Euro
1:14 Reduction Gear Unit 4:1, truck accessory

Basic accessories

1:14 Reduction Gear Unit 4:1, truck accessory

500013517

€48.99

A 4:1 intermediate gearbox brings a different character to a 1:14 truck drivetrain by shifting the balance toward higher torque. This Reduction Gear Unit is built for model truck projects where stronger pulling power matters more than outright output speed, and the compact layout suits detailed chassis installations. The housing is described as light, while the internal drive uses ball-raced metal pinion gears. That combination focuses on controlled power transfer through the gearbox itself rather than on cosmetic add-ons. The unit is specified for all Tamiya trucks except Globe Liner 56304, which gives experienced builders a clear compatibility frame for workshop planning. As an accessory part rather than a complete running set, it is intended to work within an existing truck build and changes the drive behaviour through its stated reduction ratio. A corresponding universal shaft kit is required separately for use, so the gearbox belongs in planned conversion work or a fresh 1:14 truck setup with matching drivetrain parts. Age marking: 14 Years.

1:14 Reduction Gear Unit 4:1, truck accessory
1:14 Robert, driver figure, painted accessory

Basic accessories

1:14 Robert, driver figure, painted accessory

500907186

€9.99

Robert brings a clear driver role into 1:14 model scenes with a seated pose that suits cabins, cockpits and other interior setups. The painted figure combines a black cap, white long-sleeve shirt, dark bib overalls and black boots, creating a workshop and transport look that reads cleanly inside utility vehicles and layout displays. The bent legs allow placement in seated positions, while the closed hands support convincing operator staging at steering wheels, control levers or dashboard areas where a standing figure would not fit. Painted face and hands complete the character without further finishing work, so the figure can move straight into a diorama, a truck cab or a machine interior. The male worker styling fits naturally into industrial, agricultural and transport themes where a visible driver helps define the function of the vehicle in the scene. In a model workshop display, Robert can occupy a parked cab and give the build a ready-for-duty look. In a moving vehicle scene or a static diorama, the 1:14 scale helps the figure sit in proportion with matching models and adds a more believable sense of operation.

1:14 Robert, driver figure, painted accessory
1:14 Roof Lamp PCB, model accessory, 7.2V

Electronics

1:14 Roof Lamp PCB, model accessory, 7.2V

500907184

€14.49

Roof lighting is a defining detail on many scale truck builds, and this 1:14 roof lamp set adds that electronic accent in a compact 7.2V format. The set includes 2 matching round PCBs, each fitted with an SMD LED and attached wires, making it a dedicated lighting accessory for model projects rather than a complete vehicle unit. The small board layout keeps the focus on the lighting function itself, with each module combining the LED element and PCB structure in one compact part. That format suits hobby builds where visible scale details matter and where wired components need to sit neatly within the model. The 1:14 scale reference makes this set relevant for matching scale projects, while the 7.2V specification defines the electrical setup the boards are designed for. With 2 lamp boards in the set, the lighting can be arranged as a balanced roof pair on a compatible build. In a workshop setting, the boards suit model upgrades, replacements, or fresh custom projects that call for roof-mounted lighting detail. The wired design also supports integration into existing electronic layouts where a separate lighting component is needed.

1:14 Roof Lamp PCB, model accessory, 7.2V
1:14 Roof Lamp, model accessory, 12V SMD LED

Electronics

1:14 Roof Lamp, model accessory, 12V SMD LED

500907399

€14.49

Roof-mounted auxiliary lights are a familiar detail on working trucks, and this 1:14 roof lamp set brings that look into a scale build with a compact electronic format. The set includes 2 round lamp units, each built on an SMD LED PCB and designed for 12V operation, making it a focused addition for model builders refining a vehicle's upper bodywork. The small PCB-based construction keeps each light unit compact, while the wired layout supports direct integration into a custom lighting setup. In a 1:14 project, details placed high on the cab have a strong visual effect, and this pair gives that area a more technical, road-ready character. The 2-lamp format also suits symmetrical placement across the roof line, which helps preserve the balanced proportions expected in scale truck modelling. Minimum age: 14 years. Whether used in a fresh conversion or as part of an upgrade on an existing model, the lamp pair fits naturally into workshop-style builds where lighting details matter. Combined with other scale body features, the 12V SMD LED units add a precise finishing touch that reads clearly in close-up display views and during running sessions alike.

1:14 Roof Lamp, model accessory, 12V SMD LED
1:14 SAF Coupler Plate, model accessory

Basic accessories

1:14 SAF Coupler Plate, model accessory

500907378

€46.99

In full-size trucking, the coupler plate is the working link between tractor and trailer. This 1:14 SAF Coupler Plate brings that technical detail into a scale build with a reinforced plastic main body and a mechanical layout shaped around mounted, moving parts. The assembly includes a central coupler housing, a rectangular frame, metal brackets, rods, springs, screws, nuts, washers and small fittings. Together these parts form a functional subassembly rather than a decorative surface detail, making it a strong choice for model truck projects that benefit from visible hardware and realistic chassis equipment. The reinforced plastic construction keeps the main component clearly defined, while the additional metal parts support the mounted structure and the linked movement of the mechanism. The spring elements and pivot points give the build a more technical character during assembly and once fitted to the model. On the bench, the set suits focused workshop sessions where mechanical details matter as much as the finished look. Installed on a compatible 1:14 truck model, the coupler plate adds an authentic commercial-vehicle feature that strengthens the scale impression of the chassis area.

1:14 SAF Coupler Plate, model accessory
1:14 Scania 770 Roof Lights, model accessory

RC truck accessories

1:14 Scania 770 Roof Lights, model accessory

500907804

€16.49

The Scania 770 stands out on the road with its tall cab format and strong front-end presence, and this 1:14 roof light board brings that character into a scale truck build with a focused lighting detail. Designed as a model accessory, it places 5 LED roof lights across the upper cab area to create a more defined silhouette on the finished Scania 770. The one-piece board format groups the 5 lights into a single roof-mounted assembly, which helps keep the layout consistent across the cab line. As a 1:14 accessory, it is shaped for scale modelling work where body styling and truck-specific detailing matter as much as the main chassis. The LED configuration adds a technical accent to the upper section of the model and gives the roof area a clearer visual structure than an unadorned cab top. The Scania 770 reference keeps the styling tied to a named truck subject rather than a generic lighting add-on. On the bench, the light board fits naturally into a detailed truck project alongside cab finishing and exterior upgrades. In display use or during scale driving sessions, the 5-light arrangement gives the model a more distinctive roofline and a stronger long-haul truck character.

1:14 Scania 770 Roof Lights, model accessory
1:14 Scania 770S Front PCB, truck lighting

RC truck accessories

1:14 Scania 770S Front PCB, truck lighting

500907674

€189.99

Modern long-haul trucks rely on their front light signature as much as on grille shape, and the Scania 770S is one of the clearest examples of that design language. This 1:14 front PCB lighting set translates that look into a dedicated lamp assembly for the TAMIYA Scania 770S, combining reflector detailing with functional illumination for a more authentic scale finish. The set is built around 2 matching front light modules with integrated wiring and PCB-based electronics. Each housing contains 16 LEDs, arranged to reproduce the reflector structure with a more realistic visual depth than a plain lamp insert. The lighting functions include daytime running light and side position light, adding separate illuminated zones that sharpen the truck's front profile. The specified input range of 7.2 to 12 V DC suits RC truck electrical systems in this class and gives clear compatibility guidance for installation planning. Mounted on the model, the lamp units bring more definition to the front corners, whether the truck is standing in a workshop-style display or running on an indoor course. For 14 Years and up, this accessory adds a technical finishing step that suits hobby builds focused on scale detail and working light functions.

1:14 Scania 770S Front PCB, truck lighting
1:14 Scania 770S LED Board Side, model part

RC truck accessories

1:14 Scania 770S LED Board Side, model part

500907803

€31.99

This 1:14 side LED board set is made for Scania 770S model builds and brings a defined lighting component to the truck's side sections. With 2 matching boards in the set, the layout suits symmetrical installation and gives the model a more complete illuminated appearance. The designation names a 3A specification, adding a concrete electrical reference for integration into a compatible lighting setup. As a dedicated model accessory rather than a complete vehicle, the set focuses on one specific area of the build and supports more detailed finishing work on a Scania 770S project. The side board format helps separate this component from front or rear lighting elements and makes it easier to plan placement within a larger 1:14 truck configuration. In a workshop setting, the pair can be fitted during a fresh build or used to refine an existing Scania 770S model with added side illumination. The clearly defined scale and vehicle reference also make the set a focused choice for hobbyists working on truck detailing with matching 1:14 components.

1:14 Scania 770S LED Board Side, model part
1:14 Scania 770s LED Board, model accessory

RC truck accessories

1:14 Scania 770s LED Board, model accessory

500907802

€32.49

The Scania 770 S belongs to the latest generation of long-haul trucks, known for its bold front design and strong road presence. This 1:14 LED board is made for that look in model form, adding a defined lighting element to the front area of a Scania 770s build. The accessory is specified as a 4+3 front LED board, giving model-building enthusiasts a clear layout for cab detailing rather than a generic light part. In a 1:14 truck project, details at the grille and roofline shape the whole character of the finished replica, and this board focuses attention on that upper front section. The Scania 770s designation keeps the part tied to a specific subject, which matters when a build is planned around the lines and proportions of one truck model. As a model accessory rather than a complete vehicle, it suits hobby benches where selected parts are added step by step to develop a more individual finish. Whether the goal is a shelf display, a show-style truck replica, or a running 1:14 build with extra visual definition at the front, this LED board adds a distinct custom element. The compact format also makes it a useful choice for targeted upgrades where one visible detail can change the overall impression of the cab.

1:14 Scania 770s LED Board, model accessory
1:14 Scania 770S Positionlight Set, LED kit

RC truck accessories

1:14 Scania 770S Positionlight Set, LED kit

500907676

€85.99

The Scania 770S is known for its bold front-end presence, and this 1:14 position light set translates that character into a dedicated LED upgrade for scale truck builds. With 21 LEDs and support for 7.2 V and 12 V systems, the set is aimed at model-building enthusiasts who want to add a more intricate lighting layout to a Scania 770S project. The wiring harnesses are arranged for several mounting points around the truck body, with light outputs assigned to roof lamps, side skirt position lights and multiple front lighting locations. Alongside the roof position lamps with high beam function, the set also covers 5 lightbar pods, a bumper lightbar and an auxiliary light in the radiator grille. This spreads the illumination across upper, central and lower sections of the cab, giving the model a more structured and realistic light distribution once installed. The prewired LED lines also support neat routing through a detailed truck build where cable placement matters as much as the finished effect. On a display shelf, in a workshop build, or during powered running sessions, the set adds visible definition to the Scania 770S bodywork and helps separate the truck's key styling zones through light placement. The set is not compatible with TAMIYA MFC-01/03.

1:14 Scania 770S Positionlight Set, LED kit
1:14 Scania R470/R620 Top Light Holder

Basic accessories

1:14 Scania R470/R620 Top Light Holder

500907064

€82.99

Classic Scania cab styling gains an extra scale detail with this 1:14 top light holder for the Scania R470 and R620. The accessory is made for model truck builds that benefit from a defined roof-mounted lighting position and a more finished cab line above the windscreen. The holder is made of brass and finished with nickel plating and a high-gloss polished surface, giving the assembly a bright metallic appearance that stands out cleanly against the cab. Its model-specific designation for the Scania R470/R620 keeps the look aligned with those named truck versions rather than using a generic roof bar. The lamp units are injection-molded, adding a distinct material contrast between the metal holder and the shaped light elements. Because the lamps can be lighted, the accessory also supports functional detailing as part of a broader truck lighting setup. On a workshop bench, this accessory suits detail-led upgrade projects where the roof area needs a sharper visual focal point. In a finished 1:14 display truck, the polished holder and lamp arrangement help complete the upper cab section with a scale look that fits road truck styling. Age 14+

1:14 Scania R470/R620 Top Light Holder
1:14 Seat with Mounting Bracket Accessory

Basic accessories

1:14 Seat with Mounting Bracket Accessory

500907359

€8.49

A fitted seat can change the whole impression of a scale cabin, and this 1:14 Seat with mounting bracket brings that interior detail into model vehicle projects with a single combined assembly. The black component pairs the seat and bracket in one unit, giving 1:14 builds a defined driver position and a practical mounting base at the same time. The assembly is supplied as a seat with its bracket rather than as separate loose interior parts, which helps keep installation planning focused on one matching component. The product image shows a central round joint linking the connected sections, suggesting a pivoting or articulated connection within the assembly. That layout supports model projects where positioning, alignment or replacement of a cabin component matters as much as the visual finish. As an accessory in the Models Supplies range, it fits naturally into repair work, restoration tasks and custom model conversions. In workshop use, the component can serve as a replacement for a worn or missing cabin part or as an added interior element in a 1:14 conversion. The compact assembly also suits hobby benches where compatible scale details are selected piece by piece to complete a more convincing vehicle interior.

1:14 Seat with Mounting Bracket Accessory
1:14 Servo Mount, gearbox accessory

Basic accessories

1:14 Servo Mount, gearbox accessory

500907287

€32.49

A 2-speed gearbox adds a distinct mechanical layer to a scale truck build, and this 1:14 servo mount is made to support that shifting setup with dedicated hardware. The set combines a mounting plate, linkage rod and fastening parts for integrating the servo connection into a compatible 1:14 chassis layout. The rectangular bracket uses screw mounting points and a central cutout to align the assembly on the vehicle frame, while the linkage rod connects the servo movement to the gearbox shift action. Assembly drawings in the supplied documentation show the bracket fixed to the chassis with washers and screws, with the linkage routed through the centre of the mounted section. That layout helps keep the shifting mechanism organised within the upper chassis area instead of relying on improvised mounting solutions. In workshop sessions, this accessory suits scale truck projects that use a 2-speed transmission and need the matching servo support parts. It fits naturally into drivetrain-focused builds where clean linkage routing and a defined mounting position matter as much as the finished driving function.

1:14 Servo Mount, gearbox accessory
1:14 SMD-LED White 7.2V, lighting set

Electronics

1:14 SMD-LED White 7.2V, lighting set

500907396

€9.99

This 1:14 lighting set brings white SMD-LED illumination to scale model projects that use a 7.2 V electrical setup. With 2 light units in the pack, it adds a compact lighting solution for builders working on vehicle detailing, replacement work, or custom electronics integration. The set is based around small SMD-LED components, making it suitable where a discreet light source is needed inside a model body or behind existing light positions. The product image shows a red-and-black two-wire cable prepared for connection and 2 blue axial resistors with metal leads, pointing to a layout intended for wiring into a model's electrical system. This makes the set relevant for hobby tasks that involve soldering, cable routing, and adapting lighting to a 1:14 build. In use, the 2 white LEDs can be installed as a pair for symmetrical lighting on the same vehicle or used to restore an existing light function on a scale model. The 1:14 format keeps the set aligned with matching model dimensions, while the 7.2 V specification gives a clear electrical reference for planning the installation within a workshop or hobby bench setup.

1:14 SMD-LED White 7.2V, lighting set
1:14 Speed-up spindle drive shaft, spare part

Basic accessories

1:14 Speed-up spindle drive shaft, spare part

500907611

€40.99

A slim metal linkage part can make the difference between a model that sits idle and one that returns to its intended mechanical action. This 1:14 Speed-up spindle drive shaft is specified for reference 56545 and is shaped for use as a matching spare part within that setup. The component combines a smooth cylindrical shaft body with a threaded stud on one end and a rounded eyelet on the other. That layout points to a connection between fixed mounting hardware and an adjustable or screwed-in assembly point, while the brass-coloured collar at the transition adds another defined construction detail visible on the part itself. As a replacement component, it is aimed at keeping an existing model mechanically complete rather than changing its character or adding unrelated functions. The 1:14 scale note keeps the part tied to the intended model size, and the 56545 reference gives a concrete match point when selecting the correct spare. In workshop use, the shaft fits naturally into repair, maintenance or restoration tasks where a worn, bent or missing linkage needs to be exchanged for the proper part. The clearly formed eye mount and threaded end support straightforward identification during parts sorting and model servicing. Age marking: 14 years

1:14 Speed-up spindle drive shaft, spare part
1:14 Steel Drive Shaft 47-57 mm, model part

RC truck accessories

1:14 Steel Drive Shaft 47-57 mm, model part

500907795

€17.49

A steel drive shaft in 1:14 scale format brings a core drivetrain component to compatible model vehicle builds. The stated 47-57 mm length range defines the working span clearly, making this part relevant wherever that exact distance is needed between connected drivetrain points. As a model accessory in the Models & Accessories range, this shaft is aimed at repair, replacement, or planned drivetrain setup work rather than decorative use. The steel construction places the focus on a metal transmission part for hobby applications, and the compact 47 mm to 57 mm specification gives a concrete reference when matching an existing assembly. With a minimum age marking of 14 years, the part sits in a hobby context shaped by model-building and technical maintenance. The designation itself keeps the function straightforward: drive shaft, steel construction, 1:14 scale reference, and a defined length window. On the workbench, this kind of spare part supports routine servicing of compatible RC models, whether an existing shaft is being replaced or a drivetrain layout is being completed with the required size. It also fits neatly into a stocked parts assortment for ongoing maintenance of 1:14 vehicle projects.

1:14 Steel Drive Shaft 47-57 mm, model part
1:14 Steel Drive Shaft, model part, 40-45 mm

RC truck accessories

1:14 Steel Drive Shaft, model part, 40-45 mm

500907793

€17.49

This 1:14 steel drive shaft is a compact model part for driveline setups that need a stated length range of 40-45 mm. The steel construction and scale-specific designation give model-building enthusiasts a clear starting point for matching the part to an existing build or replacement task. Within a model workshop, a drive shaft sits at the heart of mechanical power transfer, linking rotating components in the drivetrain. Here, the key data stays focused and usable: 1:14 scale reference, steel material, and a 40-45 mm size range. That makes the part easy to place in projects where a short shaft section is required and where the dimensions need to be checked against the installed layout. The concise specification also suits spare-parts planning, because the material and size can be identified quickly without sorting through broader vehicle claims that the data does not state. Whether the task is replacing a worn shaft in a running model or selecting parts for a fresh chassis setup, this component brings the essential information into one straightforward format. The 40-45 mm range supports comparison against existing hardware, while the steel build keeps the focus on a concrete, named material for hobby use.

1:14 Steel Drive Shaft, model part, 40-45 mm
1:14 Steel Drive Shaft, model part, 75-100 mm

RC truck accessories

1:14 Steel Drive Shaft, model part, 75-100 mm

500907800

€17.49

This 1:14 steel drive shaft is a dedicated drivetrain part for model assemblies that need an adjustable connection length from 75 to 100 mm. The steel shaft brings a clear mechanical role into the build, linking compatible drivetrain points within that stated span and supporting a precise, component-led setup. In a 1:14 model context, the 75 to 100 mm format gives room for installations where the distance between connected parts is not fixed to a single length. That makes the shaft relevant for replacement work as well as for fresh assemblies built around matching dimensions. The steel construction keeps the focus on the part's intended function as a drivetrain link rather than a decorative add-on. With the age marking of 14 Years, the part sits in a hobby-focused model range shaped around detailed builds and technical component choices. Whether used to replace a worn drivetrain link or to complete a compatible 1:14 project, the shaft fits naturally into workshop-style model building sessions. It suits hobby benches where measured component selection, matching dimensions and drivetrain layout all matter to the finished assembly.

1:14 Steel Drive Shaft, model part, 75-100 mm
1:14 Steel Grab Handle, model accessory, 2-pack

Basic accessories

1:14 Steel Grab Handle, model accessory, 2-pack

500907374

€14.49

On a low loader, the small fittings around the ramp do much of the visual work. This 1:14 Steel Grab Handle set supplies 2 matching parts for that area, giving model builders a dedicated accessory for low loader ramp detailing rather than a generic hardware substitute. Each piece follows a long, narrow form with a loop opening at one end and an eyelet at the other, a layout suited to linking points on the ramp assembly. The paired format supports left and right side installation where mirrored or matching components are needed. In a scale build, details of this size help keep the proportions of the trailer consistent, especially around moving or fixed ramp sections where attachment points stay visible. The set is aimed at model hobby work and fits naturally into repair, restoration or parts replacement tasks. Used during a rebuild or while refreshing an existing trailer, the 2 handles help return the low loader ramp to a complete, scale-focused appearance. The 1:14 format makes the set relevant for enthusiasts working on matching transport models and looking for the correct dedicated ramp component.

1:14 Steel Grab Handle, model accessory, 2-pack
1:14 Steering Axle, truck accessory, steel

RC truck accessories

1:14 Steering Axle, truck accessory, steel

500907735

€99.99

In 1:14 truck building, the steering axle shapes how the whole front end responds on the road. This pre-assembled front axle combines a hardened steel center section, hardened steel steering knuckles and aluminum linkages into a ready-to-install unit for TAMIYA truck models. The axle body forms the core of the assembly, while double plain-bearing-mounted steering knuckles support precise steering movement at each side. A steel tie rod with left- and right-hand threads allows fine tracking adjustment directly at the linkage, which helps dial in the front end with more control during setup. Backlash-free M3 ball joints transfer the steering motion through the system with accurate, direct action. The combination of steel load-bearing parts and aluminum linkages gives the assembly a focused mechanical layout built around steering precision. Installed on compatible TAMIYA truck chassis, the axle suits fresh builds, rebuilds and targeted front-end upgrades where exact steering response matters. The ready-for-installation format also keeps workshop time focused on fitting and setup rather than on assembling the axle itself.

1:14 Steering Axle, truck accessory, steel
1:14 Sticker Truck Ornamental Strip Decals

Basic accessories

1:14 Sticker Truck Ornamental Strip Decals

500907085

€22.49

The 1:14 Sticker Truck Ornamental Strip decal sheet adds bold truck styling to model builds with translucent A4 decal foil and a broad mix of ornamental graphics. Long stripe elements, lettering and themed emblems give 1:14 truck bodies extra visual detail, whether the focus is a clean side profile, a decorated cab roof or a trailer panel with road-inspired markings. The sheet brings together several graphic directions in one format. Visible motifs include flame and stripe designs in black, grey, blue and red, plus stars, paw prints, eagle graphics, pirate-style faces, Route 66 shields and vertical LONG VEHICLE markings. Text decals such as ROADKING, HIGHWAY BANDIT and TRUCKER-style slogans widen the choice for custom layouts. Because the elements are pre-cut, individual sections can be arranged across doors, bumpers, side skirts or rear panels with more control than a single large graphic. This decal sheet suits workshop sessions focused on finishing and personalising a truck model after body assembly and paintwork. It also works for refreshing an existing 1:14 rig with new markings, adding contrast lines, themed badges or humorous message decals where a plain surface needs more presence.

1:14 Sticker Truck Ornamental Strip Decals
1:14 Sticker-Sheet Truck Caution-Signs

Basic accessories

1:14 Sticker-Sheet Truck Caution-Signs

500907086

€22.49

This 1:14 sticker sheet brings the visual language of European road freight to model trucks, trailers and tankers in a format made for detailed finishing work. The A4 sheet uses translucent self-adhesive foil, giving builders a broad selection of markings that can be placed across cab panels, trailer sides, rear doors or underride sections to sharpen the overall look of a scale build. Beyond general warning graphics, the sheet includes TIR plates, circular speed signs and oval country codes that suit international haulage themes. Orange hazard boards, dangerous goods placards and long reflective chevron strips open up more specific layouts for tanker, hazardous cargo or service vehicle subjects. Letter and number sets also support custom registration markings, fleet numbering and other small identification details that help a model look less generic and more like a working commercial vehicle. On a finished 1:14 truck, these decals can define the character of a long-distance tractor unit, an articulated trailer or a specialist transport rig. During a fresh build or a later refresh, the sheet adds another layer of scale realism through markings that full-size commercial vehicles carry every day.

1:14 Sticker-Sheet Truck Caution-Signs
1:14 Strobe Light orange, model accessory, 2 pcs

RC truck accessories

1:14 Strobe Light orange, model accessory, 2 pcs

500907678

€45.99

Amber warning lights are a familiar detail on working trucks, and this 1:14 strobe light set brings that look into a model build with 2 compact light units. Each housing measures 11.5 x 4.5 x 2.5 mm, giving the set a small footprint that suits scale installations where lighting needs to stay in proportion to the bodywork. The lights are designed for 7.2-12 V DC input and come as orange strobe units for model electrics in that voltage range. The image shows slim silver housings with attached wires, a layout that supports installation on body sections, roof areas or accessory bars where a separate warning-light detail is needed. Compatibility with the 500907633 beacon light bar set makes this set a focused extension for existing 1:14 truck lighting projects rather than a generic decoration. Used on a show truck, service vehicle or detailed working rig, the 2 strobe lights add a distinct visual accent that sharpens the scale appearance. In custom builds, restorations or lighting upgrades, the compact format leaves room for precise placement while the amber colour reinforces the look of real commercial vehicle warning equipment.

1:14 Strobe Light orange, model accessory, 2 pcs
1:14 Susi Driver Figure, model accessory

Basic accessories

1:14 Susi Driver Figure, model accessory

500907427

€24.99

A seated driver figure brings scale and character into a model scene, and Susi does it in a clear 1:14 format that fits neatly into miniature vehicle interiors. The painted finish, smiling expression and casual outfit create a recognisable cockpit presence that turns an empty seat into part of the display. Susi is shown with brown shoulder-length hair, a red long-sleeve top with light cuffs, blue trousers and dark red shoes. The bent knees and slightly forward arms are shaped for a sitting position, which makes the figure especially useful for cabs, driver compartments and other enclosed layouts where standing figures do not fit naturally. As a named character figure, this accessory adds more than scale reference alone; it gives a vehicle or diorama a defined occupant and a more readable scene composition. In truck models, construction layouts or miniature display builds, Susi can be placed to complete the interior view and strengthen the sense of activity around the vehicle. The 14 Years marking is stated in the product data. Batteries are not included.

1:14 Susi Driver Figure, model accessory
1:14 TAM 3-Speed-Gear Hi-Torque Upgrade Kit

Basic accessories

1:14 TAM 3-Speed-Gear Hi-Torque Upgrade Kit

500907115

€23.99

A 3-speed truck transmission changes character noticeably when the gearing shifts toward torque, and this 1:14 TAM 3-Speed-Gear Hi-Torque Upgrade Kit is built exactly for that kind of drivetrain tuning. The conversion uses a smaller motor pinion to deliver 20% more torque while reducing the truck's speed, creating a setup that puts more emphasis on pulling power than outright pace. At the centre of the kit is an 8T pinion paired with a front gear plate for the stated 1:14 application. Rather than changing the whole transmission, the upgrade targets the gearing itself, making it a focused modification for model builders who enjoy refining how a truck responds under load. The altered ratio changes how power is transferred through the 3-speed gearbox, so the effect comes from the mechanical setup rather than from electronics or software. With age marking 14 Years, the kit sits in the hobby segment where drivetrain parts and fitment details matter. This kind of conversion suits workshop sessions built around tuning, rebuilding or adapting an existing 1:14 truck for a different driving feel. It also fits display and running models where lower speed and stronger torque better match the intended use of the transmission.

1:14 TAM 3-Speed-Gear Hi-Torque Upgrade Kit
1:14 Tamiya Alum. Frame, model accessory

Basic accessories

1:14 Tamiya Alum. Frame, model accessory

500907063

€24.49

Custom fabrication is part of the appeal in 1:14 truck building, and this undrilled aluminium frame stock opens that route with a clean, workshop-ready starting point. The bright-drawn surface and rounded edges give the material a neat finish while keeping the profile comfortable to handle during measuring, marking and cutting. The channel section is defined by 21 mm height, 7 mm width and 1.5 mm thickness, giving model builders a clear basis for planning structural work around scale proportions. Each length measures 1 m, and the 2 x 1 m format provides matching stock for paired frame rails or other symmetrical construction tasks. Because the material is undrilled, mounting points and cut lengths can be set to the needs of the specific build rather than following a fixed hole pattern. That makes it suitable for replacement sections, scratch-built chassis work or adapted layouts within 1:14 Tamiya projects. On the bench, the long lengths support careful alignment before drilling and fastening, especially where a build calls for matched sides and clean spacing between cross members. Age 14 years+ is stated for this model accessory.

1:14 Tamiya Alum. Frame, model accessory
1:14 Tension Belt Dummy, model accessory, 10x

Basic accessories

1:14 Tension Belt Dummy, model accessory, 10x

500907143

€11.29

Curtainside trailers are defined by the hardware that runs along their flanks, and this 1:14 Tension Belt Dummy set brings that visual cue into a scale build with 10 matching detailing parts. The format suits model-building enthusiasts who want a transport trailer to carry the look of real side-fastening equipment across the body. The set is intended for 1:14 model projects and focuses on exterior detailing rather than mechanical function. The supplied parts are arranged as moulded components for placement on a curtainside trailer, where they add structure and a more technical finish to the side area. The designation Tension Belt Dummy makes the decorative role clear, so the set can be used to sharpen the scale impression of a build without suggesting a working strap mechanism. In workshop scenes, depot layouts or road transport dioramas, these details help a trailer body read more convincingly at model scale. Used during a fresh build or as part of a later upgrade, the 10-piece set gives builders a straightforward way to add repeated side detail across a trailer. Age marking: 14 Years. The compact accessory format also suits spare-parts storage and planned custom projects centred on 1:14 curtainside vehicles.

1:14 Tension Belt Dummy, model accessory, 10x
1:14 Tire Insert 20 mm, model accessory

Tyres & rims

1:14 Tire Insert 20 mm, model accessory

500907517

€11.79

This 1:14 tire insert in 20 mm format is a dedicated model accessory for Carson references 907012 and 907612. The foam ring sits inside the tyre and provides the internal support that helps the casing hold its shape more evenly while the wheel is in use. Its circular form with a large centre opening is made for placement as an inner support element rather than as an external wheel part. That makes it a useful choice when an existing insert has worn down, when a wheel and tyre set is being rebuilt, or when compatible running gear is being prepared as a spare setup. The stated 20 mm size gives a clear fit reference, while the 1:14 scale keeps the application focused on matching model vehicles. As a replacement component, it serves a precise workshop role in maintenance and setup work. In practice, inserts like this are fitted during tyre assembly to support the tyre from within before the wheel is run again. That makes them relevant for bench work, parts sorting and routine upkeep of compatible 1:14 models, especially where a direct fit for 907012 or 907612 is required.

1:14 Tire Insert 20 mm, model accessory
1:14 Tire/Wheel-Set LowLoad Fulda/SAF

Tyres & rims

1:14 Tire/Wheel-Set LowLoad Fulda/SAF

500907141

€47.99

In 1:14 scale, the Tire/Wheel-Set LowLoad Fulda/SAF adds a distinctly commercial vehicle character to compatible model builds. The combination of black treaded tires and silver-grey wheel parts creates the look of a working truck or trailer axle setup, while the LowLoad, Fulda and SAF designation gives the set a clear enthusiast focus. The set is shown with separate tire and rim elements, along with small metal ball bearings and screws for assembly. That layout supports a more involved workshop-style build, where the wheel units are fitted together step by step rather than supplied as a single molded piece. The tread texture gives each wheel a defined surface look, and the included bearings support the rotating function once installed. For model builders, this makes the set suitable both for replacement work and for adding more specific wheel detail to an existing 1:14 vehicle project. On the bench, the individual components suit careful fitting and setup work. Once mounted on a compatible model, the assembled wheels contribute to the overall scale impression of the chassis and help complete a truck or trailer build with matching running gear detail.

1:14 Tire/Wheel-Set LowLoad Fulda/SAF
1:14 Towing bar Low loader, model accessory

Basic accessories

1:14 Towing bar Low loader, model accessory

500907627

€26.99

This 1:14 towing bar for the Low loader adds a defined structural part to scale model work, with a black moulded form that follows an A-shaped layout and integrates reinforcing ribs across the frame. The geometry shown in the part itself points to a mechanical connection role, with 1 circular mounting eye on one end and 2 cylindrical mounting points on the other for placement in the intended assembly. As a dedicated model accessory in the Models & Accessories range, the part suits replacement work, maintenance tasks or the completion of an existing 1:14 Low loader setup. The ribbed structure gives the component its formed profile, while the open triangular shape keeps the connection points clearly accessible during fitting. For hobby projects where the correct shape matters, a scale-specific part like this helps keep the model configuration consistent with the intended layout. The 14 Years age marking places the towing bar in the hobby segment rather than in early-play ranges. It fits naturally into bench work focused on repair, parts management and scale vehicle upkeep, whether the aim is to replace a worn component or keep a matching spare ready for later use.

1:14 Towing bar Low loader, model accessory
1:14 Towing Bar Trailer, model accessory

Basic accessories

1:14 Towing Bar Trailer, model accessory

500907626

€26.99

The 1:14 Towing Bar Trailer is a model accessory with a clear utility-focused shape for scale vehicle and trailer projects. Its black moulded form combines a long drawbar arm, a circular eyelet and a broad triangular centre panel, creating a part that reads immediately as a towing or linkage component within a larger assembly. The centre section carries a raised diamond-plate texture that gives the surface an industrial look suited to working vehicle scenes and technical model layouts. Along one side, small mounting tabs with holes add further fastening points, while the two extending arms end in compact connector joints for attachment within a compatible structure. This combination of eyelet, tabs and connector ends supports use as a linking, hinging or stabilising element, depending on the model setup described by the builder's own project. The 1:14 scale keeps the part aligned with matching scale builds where proportion matters. In workshop-style rebuilds, replacement jobs or custom trailer configurations, this accessory brings a distinct mechanical detail to the assembly. It suits hobby benches where individual components are selected for fit, function and scale appearance rather than as stand-alone display pieces.

1:14 Towing Bar Trailer, model accessory
1:14 Tractor Truck Taillights, accessory

Basic accessories

1:14 Tractor Truck Taillights, accessory

500907038

€19.49

Heavy road tractors are defined by the details at the rear, and this 1:14 taillight set brings that scale character into a truck build with a 6-section layout and a matched pair of rear lights. The compact housings suit model projects where the back end needs the same visual attention as the cab and chassis. Each set contains 2 taillights, making it suitable for left and right mounting on compatible 1:14 tractor truck models. The 6-section design gives the rear lighting area a more structured look than a plain single-piece lamp and helps complete the visual language of a scale truck body. The parts are intended for trucks and can be illuminated, which opens the door to more advanced finishing work when a build calls for functional light detailing. As an accessory in the models and supplies category, the set fits naturally into custom builds, replacements, or visual upgrades. On a workshop bench, the pair works well for refreshing an existing rear section or adding a more defined light arrangement to a new truck project. In a display setting, the segmented layout supports the realistic look that model-building enthusiasts often want from a 1:14 road vehicle.

1:14 Tractor Truck Taillights, accessory
1:14 Trailer Chassis 20/40ft.Cont., trailer

Models & trailers

1:14 Trailer Chassis 20/40ft.Cont., trailer

500907348

€399.99

Built around a CNC-milled aluminium frame with a black anodised finish, this 1:14 Trailer Chassis 20/40ft.Cont. brings container transport into a detailed scale format with a long 915 mm silhouette and a purposeful commercial-vehicle look. The 190 mm width and 140 mm height give the chassis a low, stretched profile that sits naturally behind a matching tractor unit in workshop, display or driving scenes. The 3-axle layout is paired with swing axle suspension and flat springs, so the undercarriage carries visible mechanical depth as well as articulated movement. Wide-base tyres with foam inserts add body to the running gear, while chrome-plated rims sharpen the road-going finish. Mechanical seat posts extend the functional trailer character beyond surface styling, and the changeable container fastening allows the chassis to be set up for 20 ft or 40 ft container formats. Age marking: 14 years. Behind a tractor unit, the long frame and multi-axle arrangement create the look of a working freight combination with clear transport focus rather than a generic road trailer. The chassis suits model-building enthusiasts who enjoy realistic commercial vehicle themes, detailed underframe construction and scale scenes centred on loading, hauling and depot movement.

1:14 Trailer Chassis 20/40ft.Cont., trailer
1:14 Trailer Door Hinge, accessory, 270° set

Basic accessories

1:14 Trailer Door Hinge, accessory, 270° set

500907142

€16.99

Trailer bodies and transport builds gain a more functional finish with this 1:14 door hinge set for model trailers. The 270° hinge design supports door movement far beyond a simple open-and-close action, making it suitable for builds that aim to show realistic access points and working rear or side doors. The set is supplied as 6 hinges and, according to the pictured contents, also includes matching mounting parts, dark hinge pins and silver countersunk screws for installation. That combination gives model builders the core hardware for fitting articulated doors on a trailer body while keeping the mechanism compact around the mounting point. The countersunk screw format helps the fittings sit neatly against the surface, and the separate pin construction forms the hinge axis during assembly. With a 1:14 scale match, the set suits trailer projects in that scale where door function is part of the visual and mechanical detail. This accessory works well for replacement jobs on existing models and for custom trailer construction where opening panels add realism to the finished vehicle. Age marking: 14 Years. Assembly is required as part of fitting the hinges to the chosen model.

1:14 Trailer Door Hinge, accessory, 270° set
1:14 Trailer Door Locking Set, model accessory

Basic accessories

1:14 Trailer Door Locking Set, model accessory

500907356

€37.99

Trailer hardware is one of the details that gives a scale build its finished character, and this 1:14 Trailer Door Locking Set focuses exactly on that area. Made for 1:14 trailer models, the set adds dedicated door locking parts that bring more structure and realism to the rear section of a trailer build. The set includes several small locking elements on sprue frames, along with rods, linkage-style bars and screws for assembly. These separate parts create a mechanical layout that can be mounted onto trailer doors and connected across the door area, so the locking setup reads as a purposeful piece of model hardware rather than a moulded surface detail. The black finish keeps the appearance clean and technical, which suits utility trailers, transport builds and workshop-focused custom projects. As an accessory set, it also opens up extra scope for refining an existing model with more visible functional detail. On the bench, the parts suit careful fitting and staged assembly; on the finished trailer, they sharpen the look of the rear doors with a more complete scale presentation. Age 14 Years.

1:14 Trailer Door Locking Set, model accessory
1:14 Trailer Fog & Backup Light, model accessory

Basic accessories

1:14 Trailer Fog & Backup Light, model accessory

500907077

€18.99

A rear fog light and backup light are standard visual cues on full-size trailers, and this 1:14 set brings that same workshop detail to a scale build. The accessory is designed as a 1+1 combination, adding 1 fog light and 1 backup light to the rear section of a model trailer with a clean, functional look. The set uses separate clear and red lens parts, metal mounting pieces and screws, so the finished assembly gains both colour contrast and defined hardware detail. That mix of components suits builders who want to refine the rear view of a truck or trailer rather than leave the bodywork plain. The compact parts can be integrated into a new project or used during a conversion, where the extra lighting details help the rear panel look closer to a working road trailer. The 1:14 scale keeps the proportions aligned with matching commercial vehicle models and trailer bodies. Mounted at the back of a trailer, the light units add a realistic finishing touch beside mudguards, rear bars or panel sections. On a display build, they sharpen the technical look of the rear end; on a custom project, they provide a focused upgrade that fits naturally into detailed scale transport scenes. Age marking: 14 Years

1:14 Trailer Fog & Backup Light, model accessory
1:14 Trailer Hitch with Pole, RC accessory

Basic accessories

1:14 Trailer Hitch with Pole, RC accessory

500907182

€59.99

A trailer hitch changes the whole character of a scale truck build, turning the rear section into a working connection point with a more authentic mechanical layout. This 1:14 Trailer Hitch with Pole for RC and mechanical models brings that function into the build with a compact black assembly that focuses on coupling detail and realistic rear-end hardware. The set centres on a hitch mechanism with a pivoting bracket, a long lever arm and a rectangular mounting plate, supported by screws, nuts and a metal washer for installation. The linkage layout creates a clear mechanical connection that suits trailer use and adds visible function to the chassis area. In close view, the assembly gives the rear section a more technical appearance through its articulated parts, mounting points and drawbar-style structure. The black finish keeps the look consistent with underbody components and commercial vehicle hardware often seen on scale truck models. Age marking: 14 years+ Mounted at the rear of a truck or trailer build, the hitch supports scenes with coupled transport setups, workshop detailing or display arrangements that focus on utility vehicles. It also suits hobby projects where the rear mechanism matters as much as the bodywork, giving the model a more complete working layout in 1:14 scale.

1:14 Trailer Hitch with Pole, RC accessory
1:14 Trailer License Plate Bracket Accessory

Basic accessories

1:14 Trailer License Plate Bracket Accessory

500907034

€13.49

A trailer rear section gains a more complete scale look with this 1:14 license plate bracket accessory, shaped for model-building enthusiasts who refine the details of trucks and trailers. The bracket comes with 2 rubber buffers and is prepared for lighting, adding a functional base for rear-end finishing on compatible builds. Its stated compatibility covers vehicles and trailers in 1:14.5 and 1:16 scale, which makes it useful across more than one workshop project. The included mounting material supports straightforward fitting on the rear section, while the bracket format suits builds that need a dedicated place for a license plate assembly rather than a generic improvised mount. The combination of bracket form, rubber buffers and lighting-ready layout gives the rear area a more technical, road-going appearance in scale form. On a detailed tractor unit and trailer combination, the part helps complete the visual line at the back of the model. It also suits restoration work, upgrades, or fresh custom builds where the rear assembly needs a defined finishing component. Age 14+

1:14 Trailer License Plate Bracket Accessory
1:14 Trailer Mud Guard Set, accessory, straight

Basic accessories

1:14 Trailer Mud Guard Set, accessory, straight

500907036

€22.49

Trailer details shape the finished look of a scale truck, and this 1:14 Trailer Mud Guard Set adds that functional bodywork with 4 straight fenders for semitrailer chassis and custom builds. The set is arranged as 2 left-side and 2 right-side parts, creating a balanced layout around the wheel area while keeping the build aligned with common trailer proportions. Each mud guard is supplied with mounts and mounting hardware, and the M3 thread specification gives a clear basis for installation on compatible frames. The straight form suits projects that call for a clean, utility-led line along the trailer section rather than a curved or stepped profile. The black moulded parts shown in the set carry ribbed surface detailing, which helps the wheel area read as a purposeful working component on truck and transport models. Suitability for both 1:14 and 1:16 trailers also makes the set useful across more than one scale workshop setup. On a replacement build, the 4-piece layout restores a complete left and right arrangement in one go. On a scratch-built hauler or modified semitrailer frame, the included hardware supports a direct route to fitting the guards and integrating them into the chassis layout. Age 14+

1:14 Trailer Mud Guard Set, accessory, straight
1:14 Trailer Mud Guard, accessory set, 2-piece

Basic accessories

1:14 Trailer Mud Guard, accessory set, 2-piece

500907137

€28.99

On a 1:14 trailer, the mud guards shape the wheel area and sharpen the finished outline of the build. This 2-piece set provides 2 matching trailer mud guards in black, giving model-building enthusiasts a straightforward way to replace missing parts or complete a trailer with the correct wheel-arch coverage. Each guard uses a curved form that sits over the wheel section, while the moulded tabs create defined mounting points for fastening. The set also includes 4 spacer bushings, 4 screws, 4 washers and 4 hex nuts, matching the visible attachment layout needed for fitting both parts. The black finish keeps the look uniform across the pair, and the identical left-right format supports a balanced appearance once mounted on the trailer. Whether a workshop build needs replacement body parts or a trailer project is being completed from individual components, this accessory set adds the specific hardware and shaped guards needed for the job. The age marking is 14 years, and the set is intended for model and accessory use within the 1:14 scale range.

1:14 Trailer Mud Guard, accessory set, 2-piece
1:14 Trailer Side Marker, model accessory

Electronics

1:14 Trailer Side Marker, model accessory

500907382

€34.99

Side marker lights are part of the visual language that gives a scale trailer its convincing road-going character. This 1:14 set is made for model trailer lighting layouts and runs on 7.2 to 12 V, fitting common electrical setups used in hobby truck builds. The set consists of 2 orange side markers with attached wiring, shown with red and black leads for straightforward polarity recognition during installation. Their compact format suits placement along the trailer sides, where marker lights define the outline more clearly and add a technical finishing touch to the body. As an electronic accessory in the Models & Accessories range, this set is aimed at hobbyists working on custom truck or trailer electrics rather than a complete ready-to-run vehicle. The 14+ age marking is stated in the product data. Used on a workshop build, a display trailer or a running road rig, the lights add a small but noticeable scale cue once connected to a suitable power system. They also work well when an existing trailer setup needs replacement marker units in a matching 1:14 format.

1:14 Trailer Side Marker, model accessory
1:14 Trailer Splash guard Set, model accessory

Basic accessories

1:14 Trailer Splash guard Set, model accessory

500907183

€30.99

In 1:14 scale, the Trailer Splash guard Set adds a purposeful trailer detail that sharpens the look of a compatible model build. The black parts use a long rectangular shape with rounded corners, creating a clean technical line that sits naturally on trailer assemblies. Each guard piece shows 4 evenly spaced circular holes along the upper edge, indicating a defined mounting pattern for attachment on suitable trailer sections. That layout gives model-building enthusiasts a concrete starting point when planning placement and alignment within a custom trailer project. The flat panel form keeps the visual effect restrained and functional, which suits workshop, transport, and utility-style model themes. As a dedicated accessory rather than a complete vehicle, the set is aimed at builds where small exterior details shape the finished overall impression. The splash guards fit especially well into trailer projects that need added body detailing around the wheel area or rear section. Combined with other 1:14 components, the set supports a more resolved scale appearance for display builds, workshop sessions, or careful model upgrades.

1:14 Trailer Splash guard Set, model accessory
1:14 Trailer Support Legs, model accessory, 73 mm

Basic accessories

1:14 Trailer Support Legs, model accessory, 73 mm

500907375

€40.99

Scale truck trailers gain a crisp workshop-style detail with these 1:14 aluminium support legs in a 2-piece set. Each leg measures 73 mm and is shaped as a compact metal assembly, making the pair a focused addition for trailer builds where scale proportion and hardware detail both matter. The aluminium construction gives the parts a precise machined appearance that suits technical model projects. Based on the visible component layout, each support leg combines a rectangular bar, a cylindrical sleeve, a rod and a round end disc, creating a defined mechanical look for installation on a matching trailer setup. The pair format supports symmetrical fitting on both sides of the trailer assembly, which helps maintain a consistent appearance across the underframe. Age marking: 14 years. In a workshop build, these support legs fit naturally into 1:14 trailer detailing, whether replacing existing parts or refining a custom scale rig. The 73 mm size keeps the specification clear for planning around compatible trailer dimensions, while the metal finish adds a purposeful visual accent to the completed model.

1:14 Trailer Support Legs, model accessory, 73 mm
1:14 Trailer Taillights, accessory, 7 sections

Basic accessories

1:14 Trailer Taillights, accessory, 7 sections

500907037

€19.49

Rear lighting is one of the details that gives a scale trailer its finished road-going look, and this 1:14 taillight set brings that detail into compact model dimensions. The set includes 2 trailer taillights with a 7-section design, giving the rear end of a model trailer a more technical and realistic appearance while keeping the layout suited to scale builds. Each light unit measures 32 mm in length, 12 mm in width and 7 mm in height, making the set suitable where rear crossmembers and mounting areas offer limited space. The format works with trailers in 1:14 and 1:16 scale, so the lights can be used on new builds as well as on replacement or upgrade projects. The 7-section arrangement adds a structured rear-light look that suits transport trailers, utility trailers and other detailed model applications. Prepared for lighting, the parts also support builders who want to integrate illuminated rear functions into the trailer setup. Mounted at the rear of a scale trailer, the pair helps complete the visual balance of the chassis and bodywork with a component that belongs exactly where model builders expect it. For workshop upgrades, restoration projects or fresh custom assemblies, these taillights add a precise finishing detail without taking up much installation space.

1:14 Trailer Taillights, accessory, 7 sections
1:14 Trailer Underride Guard, accessory, 240 mm

Basic accessories

1:14 Trailer Underride Guard, accessory, 240 mm

500907079

€41.99

On full-size trailers, underride protection is part of the functional silhouette beneath the bodywork. In 1:14 scale, this Trailer Underride Guard transfers that same lower-frame detail into a dedicated accessory set with a 240 mm format for model trailer projects. The set is built around metal rails and matching brackets, creating a technical add-on that suits transport-themed builds with visible chassis structure. Pre-drilled holes in the parts support measured placement on the trailer frame and help keep the left and right sides consistently aligned during fitting. The silver-coloured finish works naturally with ribbed trailer panels, dark underframes and chrome-look wheel details often seen on road-going trailer models. Included screws, nuts, washers and fastening parts provide the hardware needed for installation, keeping the focus on the fit and final appearance rather than on sourcing matching fixings. Used on a box trailer or semi-trailer model, the assembled guard strengthens the visual transition between body, underframe and running gear. Age marking: 14 years and up. For hobby workbench sessions, detailing upgrades or replacement tasks on a 1:14 trailer, this accessory adds a clear structural element with workshop-style realism.

1:14 Trailer Underride Guard, accessory, 240 mm
1:14 Trailersus. 8mm Lift, trailer axle parts

Basic accessories

1:14 Trailersus. 8mm Lift, trailer axle parts

500907644

€29.99

A 1:14 trailer model gains a more technical underbody look with this Trailersus. set and its 8 mm lift layout. Created for retrofitting existing trailer axles with dummy air springs, the set brings the suspension area closer to the visual character often sought in detailed truck and trailer builds. The package contains the necessary moulded parts and 2 air bellows for the conversion. It is intended for use with dummy air springs 500907069, while the metal parts and the assembly material are reused from the existing axle. That setup keeps the focus on the suspension components that change the appearance of the axle assembly, rather than replacing the complete axle hardware. The black moulded parts suit workshop-style builds, restoration projects, and scale trailer customisation where the axle zone is meant to look more complete. One set is required for each trailer axle, which helps when planning a single retrofit or equipping several axles on a longer trailer. The 14 Years marking is stated in the product data. In a display build or a running truck-and-trailer combination, the conversion adds a more model-focused finish to the area beneath the trailer body.

1:14 Trailersus. 8mm Lift, trailer axle parts
1:14 Trailerwheel, wheel rim, silver wide tire

Tyres & rims

1:14 Trailerwheel, wheel rim, silver wide tire

500907026

€17.49

In 1:14 truck modelling, the right wheel hardware shapes both the stance and the accuracy of a trailer build. This trailer wheel rim is made in silver and is designed for wide tyre applications, giving semi-trailer projects a scale-correct base with a clean commercial vehicle look. The rim is made of plastic and is constructed specifically for Fulda wide tyre 500907012. Its form supports the tyre properly and matches the requirements of wide trailer wheel setups used on detailed model transport combinations. The part is suitable for all axles of Tamiya semi-trailers, which makes it a practical choice for replacement work, ongoing workshop projects or planned trailer configurations within that platform. The silver finish works well on road-going trailer builds where a realistic wheel appearance matters alongside fit. The set contains 2 wheel rims, making it suitable for one trailer axle pair. In a workshop setting, the pair can be used to refresh an existing trailer or complete a new axle assembly with matching wheel width and finish. Age 14+

1:14 Trailerwheel, wheel rim, silver wide tire
1:14 Traktor Truck fire drencher, accessory

Basic accessories

1:14 Traktor Truck fire drencher, accessory

500907123

€8.99

Scaled accessories often decide whether a truck build looks merely assembled or fully equipped. This 1:14 Traktor Truck fire drencher adds that final workshop-style detail, bringing a service-oriented look to model trucks and trailers through a compact exterior attachment. The accessory is supplied as a kit and is designed for universal attachment across 1:14 model trucks and trailers. That makes it useful both for a fresh build and for upgrading an existing rig with an extra equipment point on the body or side area. Decals are included to refine the assembled part with printed detail, helping the finished fitting sit more naturally within a scale vehicle layout. The focus stays on visual realism rather than on a large conversion, so the fire drencher works as a small component with a clear effect on the overall appearance. Mounted on a truck or trailer, the accessory suits workshop, service, utility or emergency-style model scenes where exterior equipment helps define the vehicle's role. The 14 Years marking fits hobby-focused use, and the compact format makes the part easy to integrate into custom detailing plans across different 1:14 setups.

1:14 Traktor Truck fire drencher, accessory
1:14 Truck Alum. Coupler Plate, model accessory

Basic accessories

1:14 Truck Alum. Coupler Plate, model accessory

500530918

€53.99

Truck models in 1:14 scale rely on hardware that fits the chassis layout with accuracy, and this aluminium coupler plate set is built around that need. The set combines a large machined plate, a smaller matching bracket and 5 screws, creating a dedicated mounting solution for detailed truck builds. The main plate has a rounded open centre, several drilled holes and curved slots that allow the mounting position to be set with care during installation. Countersunk holes support a flush screw fit, while the shaped cut-outs keep the assembly compact around the surrounding structure. The second metal part adds a separate fastening point with its central circular opening and additional mounting holes, giving model builders another defined connection element within the same setup. The silver finish and machined surfaces match the technical character of scale truck components without adding unnecessary bulk. On a workshop bench, the set suits rebuilds, upgrades or replacement work where a coupler mounting point needs a clean mechanical layout. In a finished 1:14 truck, the shaped plate and bracket integrate as functional hardware that supports a tidy, purposeful chassis installation.

1:14 Truck Alum. Coupler Plate, model accessory
1:14 Truck Front Wheel, model accessory, chrome

Tyres & rims

1:14 Truck Front Wheel, model accessory, chrome

500907061

€26.49

Heavy truck models gain a more defined front end with these 1:14 Truck Front Wheel rims in a wide format and chrome finish. Designed for TAMIYA trucks, the rims fit the front axle and bring a bright metallic surface together with a deeper wheel profile that stands out clearly on road-going tractor units and custom show builds. The set contains 2 matching rims, making it suitable for the left and right side of the front axle without mixing styles or widths. The wheel face uses a large central hub opening and a ring of small bolt holes, details that echo full-size truck wheel design and give the axle area a more technical appearance. The wide format changes the visual presence at the front of the model, while the reflective finish catches light across the dish shape and hub area. Recommended tyre: Fulda, item 500907012. This accessory suits restoration work on an existing truck, a visual refresh during a rebuild, or a more defined wheel setup on a new 1:14 project. On display shelves and on the running model alike, the chrome rims add a clean truck-specific finish to the front axle.

1:14 Truck Front Wheel, model accessory, chrome
1:14 Truck Front Wheel, rim, wide ABS

Tyres & rims

1:14 Truck Front Wheel, rim, wide ABS

500907013

€17.49

Truck models in 1:14 scale rely on axle-specific parts, and this wheel rim set is made for that exact role. The 2 wide front wheel rims are intended for truck front axles and give compatible builds a dedicated replacement or upgrade part with the correct format for the front end. Each rim is made from ABS and uses a wide profile that is constructed for the Fulda wide tire 500907012 named in the product data. The gray finish suits technical truck builds, while the molded form shown on both rim faces highlights the hub opening, bolt-hole styling and reinforcing spoke structure on the inner side. That combination makes the set useful both for restoring an existing model and for assembling a front axle setup with matching wheel hardware. Compatibility is stated for all front axles of Tamiya trucks, which places the rims clearly within established 1:14 truck model projects. In workshop use, the 2-piece contents support a paired front-wheel installation, whether the goal is replacing worn rims, preparing a rebuild, or completing a truck chassis with axle-correct wheel components.

1:14 Truck Front Wheel, rim, wide ABS
1:14 Truck Lighting Parts and Bulbs Accessory

Basic accessories

1:14 Truck Lighting Parts and Bulbs Accessory

500013512

€8.79

Truck models gain a more complete road-going look with this 1:14 lighting parts and bulbs set, created for detailed commercial vehicle builds and scale-focused workshop updates. Suitable for all Tamiya trucks, it brings together key light components in a format that fits established 1:14 truck projects. The set contains 5 items for lighting work, making it a practical addition when a build needs replacement lamp parts or extra visual detailing. The included parts support careful fitting on truck bodies and help extend the finishing stage beyond the main chassis and cab assembly. For model-building enthusiasts, that added detailing work is part of what gives a truck project its individual character, especially when matching the look of working road vehicles in miniature form. On a fresh build, the set can be used while planning body details and final exterior trim. On an existing model, it supports repair work or a visual refresh when worn or missing light parts need to be replaced. Age 14 Years  Warning! Not suitable for children under 14 years.

1:14 Truck Lighting Parts and Bulbs Accessory
1:14 Truck Mirror & Horn Set, truck accessory

Basic accessories

1:14 Truck Mirror & Horn Set, truck accessory

500013513

€8.79

Chrome-style exterior details are part of the visual language of classic show trucks, and this 1:14 Truck Mirror & Horn Set brings that look into scale model work with parts sized for 1:14 truck projects. The set is suitable for all Tamiya trucks and focuses on visible cab details that change the character of a finished build. The contents include 2 horns and 2 rearview mirrors, giving both sides of the cab matching components rather than a mixed add-on approach. As separate model parts, they suit hobby builds that are assembled and finished by hand, whether the goal is a cleaner stock-style truck or a more individual custom setup. The mirror pieces add a familiar cab outline, while the horn parts extend the roofline detail often seen on road-going trucks. The set is intended for model enthusiasts working at 1:14 scale and the age marking is 14 Years. This accessory set fits naturally into new truck projects, rebuilds and visual updates where exterior details make the difference between a basic shell and a more complete road-truck appearance. It also works well when replacing missing trim parts or when giving an existing Tamiya truck a sharper, more finished cab profile.

1:14 Truck Mirror & Horn Set, truck accessory
1:14 Truck Steering Rod, model accessory, steel

Basic accessories

1:14 Truck Steering Rod, model accessory, steel

500013516

€8.49

A 1:14 truck model gains a focused steering upgrade with this steel steering rod, made for the steering linkage on compatible tractor units. The shaped metal part uses threaded ends for installation into the linkage position, giving model-building enthusiasts a dedicated component for refining the steering setup on an existing build. The rod is intended for the Mercedes Benz 56305 and Volvo FH 12 56307 tractor models from TAMIYA. Its bent profile and elongated centre section match the function of a linkage part that connects within the steering system rather than serving as a decorative add-on. As a single replacement or optimisation component, it suits workshop-style maintenance, parts renewal or selective tuning where the steering assembly is being revised. The included instruction manual supports fitting, while the steel construction keeps the focus on a functional mechanical part for the model. On the bench, this accessory fits naturally into a rebuild, repair or upgrade session centred on the front steering mechanism. In a finished 1:14 truck, the steering linkage remains one of the key areas for model builders who want the mechanical setup of the tractor unit to stay precise and purpose-built.  Warning! Not suitable for children under 14 years.

1:14 Truck Steering Rod, model accessory, steel
1:14 Truck Trailer Taillights, model accessory

Basic accessories

1:14 Truck Trailer Taillights, model accessory

500907039

€19.49

Rear lighting is one of the details that gives a scale truck or trailer its finished character, and this 1:14 taillight set focuses exactly on that visual signature. The round 3-section design brings a recognisable commercial-vehicle look to the rear end of a model and suits builds that aim for a more complete road-going appearance. The set is made for 1:14 truck and trailer applications and contains 2 matching light units. Each lamp uses a round format with a red outer lens area and a central amber section, echoing the layout seen on full-size rear combination lights. That makes the pair a useful choice for body upgrades, replacement work, or fresh custom projects where the rear panel needs scale-correct lamp details. The matching format helps keep the left and right side visually consistent, which matters on trailers and tractor units with exposed rear bodywork. Mounted on a truck chassis project, a trailer rear frame, or a custom body section, these taillights add a small but noticeable finishing touch. They suit workshop-style builds where the final impression depends on realistic components rather than broad styling alone. Age marking: 14+

1:14 Truck Trailer Taillights, model accessory
1:14 Truck Wheel Axle, model accessory, steel

Basic accessories

1:14 Truck Wheel Axle, model accessory, steel

500907091

€18.29

Built for 1:14 truck models, this Hi.Precision wheel axle brings a focused steering upgrade to the front end of the chassis. The steel construction and dedicated axle format place the emphasis on cleaner wheel guidance, with the stated purpose of improving steering on TAMIYA trucks. As a model accessory rather than a complete vehicle, this part fits naturally into workshop-style upgrade projects where the steering system is being refined component by component. The 1:14 scale keeps it aligned with truck model builds in that format, while the steel material adds a clearly defined mechanical element to the setup. The Hi.Precision designation points to a more exact steering response, making the axle relevant for builders who want a more controlled feel in directional inputs. The age marking is 14 years and up. In use, the axle suits detailed truck scenes, driving sessions and chassis tuning where front-wheel accuracy has a visible effect on how the model tracks through turns. It also works as a targeted replacement when a build calls for a steering-focused hardware change instead of a visual add-on.

1:14 Truck Wheel Axle, model accessory, steel
1:14 Underride Guard, trailer accessory, mount

Basic accessories

1:14 Underride Guard, trailer accessory, mount

500907366

€47.99

In 1:14 scale, this underride guard assembly adds a distinct commercial-vehicle detail to a dump trailer build. The metal crossbar with its 2 upright mounting brackets gives the rear section a more technical, model-accurate appearance while fitting the visual language of working trailer equipment. The assembly combines a tubular bar with perforated brackets, rear tabs and an elongated slot for fastening. That layout provides several fixing points for installation and supports more exact alignment on the trailer frame. The visible hole pattern and bracket geometry also make this part stand out as a functional scale component rather than a simple trim piece. For model-building enthusiasts, details like the upright supports and the structured mounting points help carry the look of a dump trailer through to the rear end. Used in a workshop build, during a trailer upgrade or as part of a scale-focused finishing stage, the underride guard adds another layer of hardware detail to 1:14 commercial vehicle projects. Age 14 Years

1:14 Underride Guard, trailer accessory, mount
1:14 UNI-TLS IR, transmitter unit, low loader

RC truck accessories

1:14 UNI-TLS IR, transmitter unit, low loader

500907711

€84.99

Heavy-haul trailer functions become far more precise with the 1:14 UNI-TLS IR transmitter unit, built to connect an existing lighting system to the CARSON TLS low-loader control setup. The module sends both lighting and auxiliary commands to the trailer via infrared, creating a clean control link for complex low-loader operation. Designed for third-party use, the unit expands a 1:14 electronics layout with a focused set of control options for articulated transport models. The infrared transmitting diode forms the signal bridge to the trailer control unit 500907712, which is required separately for trailer control. Alongside standard light commands, the system supports additional switching tasks for functions such as a gooseneck section, electric supports, ramp drive or steerable trailer axles. Operating voltage is 5-7.4 V DC, and power is supplied directly via the receiver. Scope of delivery includes the UNI transmitter module, IR transmitting diode, 10-pin cable set and instructions. In a workshop-style build or an active driving layout, the module suits model hauliers who want trailer lighting and moving low-loader functions to respond through one coordinated infrared link. It fits especially well into detailed truck and trailer combinations where realistic control of transport equipment matters as much as the tractor unit itself.

1:14 UNI-TLS IR, transmitter unit, low loader
1:14 Universal Antenna-Set, model accessory

Basic accessories

1:14 Universal Antenna-Set, model accessory

500907603

€13.99

Antenna details are a small part of a build, yet they strongly shape the finished look of a scale vehicle. This 1:14 Universal Antenna-Set brings together 5 separate antenna parts for model work, each shown in a different length or base form for use on compatible 1:14 bodies. The set covers several mounting styles, including round and tapered bases, a right-angle connector, a forked clip-style end and straight peg fittings. That mix makes the parts useful where an existing body shell, holder or mounting point calls for a specific connection style rather than a single fixed format. The black finish keeps the look neutral across different paint schemes and body designs. Because the parts vary in shape, the set can support both direct replacement work and detail-focused finishing on trucks or other scale vehicles. On the bench, the antenna parts suit restoration jobs, body refresh projects or the final detailing stage of a new build. Age marking: 14 years. The compact set also works well as a practical stock of spare fittings for hobby sessions where small exterior details need to be matched cleanly to the model.

1:14 Universal Antenna-Set, model accessory
1:14 Universal tie-down-set, lowloader accessory

Basic accessories

1:14 Universal tie-down-set, lowloader accessory

500907450

€29.49

Heavy haul transport depends on visible securing points, and this 1:14 Universal tie-down-set lowloader brings that detail into scale form with a 300 mm load-securing chain for model trailer setups. The set is designed as an all-purpose tie-down chain for lowloader use, adding a functional-looking fastening element to cargo scenes and transport layouts. The scope of delivery combines 5 tie-down eyes, 2 cargo hooks and the chain itself, giving several separate fixing components for arranging a more believable securing pattern on a lowloader deck. In a 1:14 model environment, these parts help define how machinery, freight or construction loads are visually anchored without relying on moulded-on detail alone. The metal chain appearance adds weight and texture to the scene, while the individual hardware pieces support more deliberate placement around the trailer structure. Age marking: 14 years. On a workshop shelf, in a transport diorama or as part of a finished truck-and-trailer combination, the set adds the kind of small-scale hardware that changes how a load scene reads at a glance. It suits model-building enthusiasts who want cargo presentation on a lowloader to look more complete and more closely worked through.  Warning! Not suitable for children under 14 years.

1:14 Universal tie-down-set, lowloader accessory
1:14 Volvo FH16 Headlight, model light unit

Electronics

1:14 Volvo FH16 Headlight, model light unit

500907507

€109.99

The Volvo FH16 is known for its distinctive front lighting signature, and this 1:14 headlight unit brings that look into a model build with a chrome-look housing, projector-style centre lens and several integrated light points. The shaped assembly is made for Volvo FH16 model applications and adds a more defined front-end appearance once fitted. Colour-coded wires assign each lighting function directly in the installation guide: yellow for left indicator, orange for right indicator, black for driving light, pink for high beam, green for fog light, grey for daytime running light and white for cornering light. The supplied documentation also shows mirrored left and right connector layouts, which helps place each lamp module correctly on the vehicle front. A rear cover is secured over the internal board with 1 x M2x12 screw and 2 x M2x10 screws. The safety note in the data states that reversing polarity or increasing the supply voltage can damage the SMD components. This light unit suits detailed truck model projects where the front section is being repaired, upgraded or completed with the correct lamp layout. The documentation also notes a front bumper adjustment on part MF6, where 15 mm must be removed before bumper installation in the shown setup, giving model builders a clear reference for fitting work.

1:14 Volvo FH16 Headlight, model light unit
1:14 VolvoFH16 Front Indicator, model spare part

Electronics

1:14 VolvoFH16 Front Indicator, model spare part

500907506

€65.99

The Volvo FH16 has become a familiar sight in long-haul transport, known for its modern cab design and strong road presence. This 1:14 front indicator spare part brings that truck-specific detail into a compact replacement component made for model-building enthusiasts working on compatible VolvoFH16 truck setups. The assembly combines a curved translucent light element with a twisted red and yellow cable and a protected section finished with black heat-shrink tubing. That layout supports clean routing inside a model body where space is limited and wiring needs to stay organised around the front end. The 7.2 V and 12 V specification gives a clear electrical reference for matching the part to an existing lighting system without guessing across incompatible voltage ranges. As a dedicated model spare part rather than a generic wire lead, it suits repair work, restoration projects, or detail-focused rebuilds where the original front lighting arrangement needs a like-for-like replacement. On the workbench, the compact harness format fits naturally into maintenance sessions focused on worn lighting parts or incomplete truck builds. In a finished 1:14 display or running model, the front indicator helps restore the intended look of the VolvoFH16 front section while keeping the electronics layout aligned with the model's original lighting function.  Warning! Not suitable for children under 14 years.

1:14 VolvoFH16 Front Indicator, model spare part
1:14 Warning Signs LED TLS, trailer accessory

RC truck accessories

1:14 Warning Signs LED TLS, trailer accessory

500907713

€54.99

Heavy haulage details make the difference on a scale build, and these 1:14 warning signs bring that look into the trailer setup with illuminated red and white SMD LEDs. The set contains 4 warning signs ready to connect, adding a functional lighting element that suits low-loader scenes and transport-focused model layouts. The pre-wired power circuit board keeps the electrical side straightforward and is designed for direct connection to the TLS low-loader control unit 500907712. Installation uses the existing mounting points on the CARSON gooseneck low-bed trailer 500907700, which keeps the fit aligned with the intended trailer platform. Each sign measures 21 x 21 mm with a width of 71 mm, giving the assembly a compact scale presence. The extendable construction can be moved in or out by loosening the screws, so the sign position can be adapted to the width of the load. Mounted on a low-bed trailer, the illuminated signs add a convincing finishing touch to heavy transport combinations in workshop builds, display setups, and driving sessions. The 5 V/DC operating voltage matches the stated electrical specification for integration into the TLS system.

1:14 Warning Signs LED TLS, trailer accessory
1:14 Wheel & Fulda Ecotonn+ Tire, trailer wheel set

Tyres & rims

1:14 Wheel & Fulda Ecotonn+ Tire, trailer wheel set

500907006

€37.99

Heavy haul trailers rely on the right wheel format, and this 1:14 wheel set brings that look into model building with Fulda Ecotonn+ tyres and double wheel rims for flatbed and low loader applications. The combination of 52 mm outer diameter, 30 mm inner diameter and 14 mm width gives the running gear a clearly defined footprint suited to detailed trailer projects. The set consists of 4 flatbed truck tyres and 2 double wheel rims with hubcaps, creating a coordinated basis for replacement work or a fresh trailer build. The rim design is prepared for retrofitting with 11 x 5 x 4 ball bearings. That layout allows 4 bearings per double rim, which is a useful detail when a model is being rebuilt with smoother wheel support in mind. The separate tyre and rim components also suit hobby work that involves fitting, upgrading and maintaining scale transport models rather than replacing a single worn part. On a workshop bench, the set fits naturally into trailer servicing, visual restoration or a custom low loader project in 1:14 scale. Age marking: 14 years and over. Whether the goal is to refresh a flatbed trailer or complete a heavy transport build with matching running gear, the dimensions and component mix keep the focus on authentic model detail.

1:14 Wheel & Fulda Ecotonn+ Tire, trailer wheel set
1:14 Wheel axle-Set, trailer accessory

Basic accessories

1:14 Wheel axle-Set, trailer accessory

500907158

€29.99

This 1:14 Wheel axle-Set is made for Carson Trailer applications and brings a focused spare-parts solution to model workshop tasks. The set contains 6 identical axle components, each shaped with a threaded shaft and a hexagonal centre section that allows the part to be tightened with a tool during fitting. As a trailer accessory rather than a complete vehicle, the set is aimed at maintenance, replacement and parts supply within a 1:14 model setup. The matching format of all 6 pieces helps keep wheel mounting hardware consistent across the trailer, which matters when worn or missing axle parts need to be exchanged. The threaded design supports secure installation into the intended mounting points, while the central hex section gives a defined grip area for controlled assembly work. Metal construction adds the precise, mechanical character expected in model hardware. On the workbench, the set supports routine servicing, rebuilds and parts replacement on compatible Carson Trailer assemblies. Age marking: 14 Years. No batteries included.

1:14 Wheel axle-Set, trailer accessory
1:14 Wheel Hub Cover, model accessory, 2-pack

Tyres & rims

1:14 Wheel Hub Cover, model accessory, 2-pack

500907353

€8.99

These 1:14 wheel hub covers bring a neat finishing touch to compatible model builds and add a more complete look around the wheel area. Supplied as 2 pieces, the set suits hobby projects that need matching components on both sides of an axle position. As a model accessory, the set fits naturally into repair work, replacement jobs or visual detailing on 1:14 vehicle projects. The compact format makes these parts relevant where missing hub covers interrupt the overall appearance of a build or where an existing setup is being refreshed with like-for-like components. The age marking of 14 years places the set in the hobby category, aligning it with parts-based model work that calls for careful handling and accurate component choice. On the bench, these wheel hub covers can be used during a rebuild, while replacing worn parts, or when completing a scale vehicle with the final exterior details in place. In a display setting or during running sessions, matched hub details help the wheel area read as a coherent part of the finished model.

1:14 Wheel Hub Cover, model accessory, 2-pack
1:14 Wheel Wide Trailer Wheels, Chrome Rims

Tyres & rims

1:14 Wheel Wide Trailer Wheels, Chrome Rims

500907055

€26.49

Chrome truck rims are a classic detail on full-size road trailers, and this 1:14 wheel set brings that look into a scale build with a wide format made for trailer use. The set includes 2 wide trailer wheels with a chrome finish, giving compatible models a brighter, more defined wheel appearance on the axle. The wheel design is intended for CARSON-MODEL SPORT trailers and suits rebuilds, replacements or visual upgrades where the running gear needs a fresh matching look. Each rim is specified for use with 5 x 11 x 4 mm ball bearings, which gives the assembly a clear bearing standard for fitting and maintenance. The wide profile supports the visual character expected from scale transport trailers, while the chrome surface, vent openings and shaped hub area add mechanical detail that stands out on the undercarriage. As an accessory part rather than a complete vehicle, the set focuses on wheel appearance and fit within an existing trailer setup. Mounted on a scale trailer, the 2 matching rims suit workshop-style rebuilds, custom transport combinations and replacement jobs after regular running. In display scenes or on the road behind a truck tractor, the chrome finish gives the trailer axle area a more authentic heavy-duty look.

1:14 Wheel Wide Trailer Wheels, Chrome Rims
1:14 Wheel wide, trailer wheel set, grey

Tyres & rims

1:14 Wheel wide, trailer wheel set, grey

500907154

€17.49

A 1:14 trailer model gains a clean technical update with this wide wheel set in grey. The set contains 2 matching wheels and is shaped for trailer use, making it a useful choice for replacement work, rebuild projects or a visual refresh on an existing scale setup. The wide format gives the wheel face a fuller presence on the model, while the grey finish keeps the look neutral enough to suit many trailer styles. The visible deep rim profile adds scale character, and the inner spoke reinforcement shown on the rear view points to a construction made for model use rather than a flat display piece. Because both wheels match in colour and form, the pair supports a balanced appearance across the axle. The 1:14 scale keeps the proportions aligned with compatible trailer builds, which matters when a model is being restored or updated with consistent running gear. On workshop shelves, during maintenance, or as part of a custom trailer project, this 2-wheel set fits naturally into the parts stock for 1:14 model building. The age marking is 14 years and up.

1:14 Wheel wide, trailer wheel set, grey
1:14 Wide Wheel f.Tamiya Trailer, wheel set

Tyres & rims

1:14 Wide Wheel f.Tamiya Trailer, wheel set

500907053

€26.49

European-style single wheels are a defining detail on many road-going trailers, and this 1:14 Wide Wheel set brings that look to compatible Tamiya trailer builds. The set contains 2 wide wheels with a chrome finish, giving the trailer a brighter rim face and a broader visual stance than a standard setup. The wheel design combines a decorative outer rim with a hex-shaped inner mount for fitting to compatible trailer axles. Circular rim openings and lug-style detailing add to the heavy-duty truck character, while the wide format is intended specifically for trailer use in 1:14 scale. Carson identifies Fulda tyres, item 500907012, as the recommended match for this wheel set when completing the conversion. Age marking: 14 years. Mounted on a show truck, road tractor trailer or custom transport build, the pair shifts the look toward a European single-wheel configuration with a more model-specific finish than plain stock rims. The set suits replacement work, visual upgrades and detail-focused trailer projects where wheel style is part of the overall build concept.

1:14 Wide Wheel f.Tamiya Trailer, wheel set
1:14 Wooden EPAL Euro-Pallet, model accessory

Basic accessories

1:14 Wooden EPAL Euro-Pallet, model accessory

500907608

€4.59

The Euro-pallet is one of the most recognisable load carriers in modern freight handling, and this 1:14 Wooden EPAL Euro-Pallet brings that familiar transport detail into model layouts with a format that immediately reads as warehouse, depot and loading yard equipment. The wooden build and slatted top give the miniature a grounded, realistic presence beside trucks, trailers and industrial scene elements. Its shape follows the classic pallet layout with several top boards and 3 block supports underneath, creating the layered structure associated with full-size Euro pallets. Visible EUR and EPAL style markings on the front blocks strengthen the scale impression and give the accessory a more convincing logistics character in close-up display settings. The light wood finish suits freight scenes, workshop dioramas and loading areas where cargo handling details help define the setting. Placed on a loading dock, in a storage corner or beside a model truck, the pallet works as a simple scene-building element that adds context without pulling focus from the main vehicle. Age marking: 14 Years. No batteries required.

1:14 Wooden EPAL Euro-Pallet, model accessory
1:14 Wooden Pallet-Cage, model accessory

Basic accessories

1:14 Wooden Pallet-Cage, model accessory

500907609

€17.49

A wooden pallet-cage is a familiar sight in freight yards, farm depots and market loading areas, and this 1:14 version brings that same working character into a model scene. The accessory combines a slatted crate body with a Europallet-style base, creating a transport detail that fits naturally into logistics, agricultural or workshop layouts. Light natural wood gives the cage a plain, realistic finish that suits weathered or freshly arranged scenes alike. Four upright corner posts frame the crate, while horizontal side slats and diagonal upper bracing shape the look of a practical storage container rather than a decorative prop. The open top leaves the interior visible and ready for individual scene planning, whether the setting calls for stacked goods, workshop materials or market cargo. The raised pallet feet add another recognisable handling detail drawn from full-size freight equipment. On a shelf, in a diorama or beside a 1:14 truck setup, the pallet-cage works as a compact scenery element that adds structure around loading zones and storage areas. Age 14 Years

1:14 Wooden Pallet-Cage, model accessory
1:14 Wooden Tarp Hoop Set, model accessory

Basic accessories

1:14 Wooden Tarp Hoop Set, model accessory

500907163

€24.99

This 1:14 Wooden Tarp Hoop Set brings a classic transport detail into model-building work with 32 wooden hoop elements shaped for scaled construction and restoration tasks. The light wood surface and visible grain give the parts a convincing material presence, whether they are fitted into a trailer frame, adapted for a custom body section or kept ready for future workshop use. Each strip is supplied as a separate component, making the set useful for replacing worn parts, extending an existing structure or planning a fresh build with matching hoop elements throughout. The long, slim format supports careful trimming and alignment during assembly, while the natural variation in the wood keeps the finished work visually grounded rather than overly uniform. As a dedicated model accessory rather than a complete vehicle, the set focuses on one specific construction detail and leaves room for individual finishing choices. On the bench, the 1:14 scale suits transport models that call for tarp supports, frame detailing or period-style load coverage. Age 14 Years is stated for the set. In workshop scenes, diorama projects or trailer conversions, these 32 wooden parts add a practical supply of material for precise, hands-on model work.

1:14 Wooden Tarp Hoop Set, model accessory
1:14 Working Light, model accessory, swiveling

Basic accessories

1:14 Working Light, model accessory, swiveling

500907576

€6.99

This 1:14 working light brings a focused scale detail to model scenes where technical fittings shape the overall impression. The swiveling design adds movement to the lamp itself, giving the accessory a more mechanical character than a fixed light and supporting a layout that looks closer to workshop, transport or site equipment. As a model accessory, the light is suited to builds that rely on visible equipment details rather than broad body changes. The 1:14 scale makes it relevant for matching scale projects, while the swiveling function introduces a clear handling feature instead of a purely static add-on. That makes the lamp useful for hobby builds that aim to show working hardware, service equipment or utility-focused vehicle setups. The age marking in the product data is 14 Years. Placed on a truck, machine or other scale model, the light can help define the role of the vehicle within a diorama or display setting. It also fits projects where individual accessories are chosen carefully to give the finished build a more specific technical identity.

1:14 Working Light, model accessory, swiveling
1:16 Volvo L260H, wheel loader, 100% RTR

RC diggers

1:16 Volvo L260H, wheel loader, 100% RTR

500907693

€369.99

The Volvo L260H is one of the best-known wheel loaders on large construction sites, and this 1:16 RC version brings that machine character into a fully functional ready-to-run format. At 530 mm long, 204 mm wide and 212 mm high, the model carries the broad stance and working proportions of the original into a format that gives the bucket action real presence. The 4110 g wheel loader combines scale detail with a drivetrain built for active operation. A battery holder sits under the engine hood, keeping the 7.4 V 1500 mAh Li-Ion drive battery neatly integrated into the body. The detailed driver's cabin includes an opening door, adding another layer of realism to the exterior. Sound and light functions extend the machine feel during operation, while the true-to-original wheel loader tyres match the construction styling with a tread pattern suited to the model's working look. The radio system uses 2.4 GHz technology and 10 channels for precise command input across the loader's driving and function controls. Running time reaches 60 minutes, giving the model enough time for longer loading sequences, repeated manoeuvres and display-worthy driving sessions. On a floor, paving or a compacted play surface, the combination of scale dimensions, functional bucket action and machine-style steering creates a focused RC construction experience.  Warning! Not suitable for children under 14 years.

1:16 Volvo L260H, wheel loader, 100% RTR
1:50 Nano City Crane Truck, RC truck, 2.4 GHz

- 21 %

Mini RC cars

1:50 Nano City Crane Truck, RC truck, 2.4 GHz

500907682
€14.99

€18.99

Construction crane trucks bring compact utility engineering into motion, and this 1:50 Nano City Crane Truck translates that character into a radio-controlled format with a realistic crane truck appearance, a detailed driver's cab and LED lighting. At 135 mm long, 60 mm wide and 90 mm high, the model fits neatly into indoor driving spaces while still carrying the proportions and working look of a mobile crane vehicle. The interference-free 2.4 GHz remote control system supports precise handling across the truck's compact 146 g format, making short direction changes and careful positioning easy to manage. A 3.7 V Li-Ion drive battery with 500 mAh capacity powers travel times of up to 40 minutes, and the included USB charger keeps the rechargeable setup straightforward. The crane tower can be rotated manually through 360°, while the outriggers can be adjusted manually in both height and length to change the truck's stance for different scenes. That combination suits floor-based routes, desk-edge manoeuvres and small construction layouts where the truck can drive into place, extend its supports and turn the crane into position. With the ready-to-run model, remote control, battery, charger and instructions included, the set focuses on compact RC driving with a functional crane feature and a strong city-service look.

1:50 Nano City Crane Truck, RC truck, 2.4 GHz
1:50 Nano City Garbage Truck, RC car, 2.4 GHz

- 21 %

Mini RC cars

1:50 Nano City Garbage Truck, RC car, 2.4 GHz

500907683
€14.99

€18.99

Utility trucks are a familiar part of the city scene, and this 1:50 Nano City Garbage Truck brings that working-vehicle character into a compact radio-controlled format. At 135 mm long, 60 mm wide and 76 mm high, the model combines a small footprint with a clearly defined body shape and a detailed driver's cab. The ready-to-run set includes the model, a 2.4 GHz remote control, a Li-Ion drive battery rated at 3.7 V and 500 mAh, a USB charger and instructions. With a weight of 146 g, the truck stays light in hand and easy to place on the floor between runs. The 40 minute runtime supports longer driving sessions without frequent charging breaks, while the radio system keeps the control link focused on the vehicle during each manoeuvre. LED lighting adds another functional detail to the body, and the rubber tires support controlled movement with their non-slip contact patch. The compact scale suits indoor routes across hallways, living spaces or a cleared play area, where the truck can weave around furniture legs, follow improvised collection rounds or line up with other city-themed vehicles. Between runs, the true-to-original design and utility-truck proportions also give the model a neat display presence on a shelf or desk.

1:50 Nano City Garbage Truck, RC car, 2.4 GHz
1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

Mini RC cars

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

500404336

€17.99

The Lexus LX570 appears here as a compact 1:60 Nano Racer with radio-controlled handling and a body shape that carries the full-size SUV's presence into a format just 79 mm long. At 33 mm wide, 22 mm high and 25 g in weight, the model stays light and easy to place on tables, smooth floors or short indoor courses. The 2.4 GHz control system supports stable command input across a range of 15 m, while the handset combines driving control with a built-in charging connection. A 1.2 V 80 mAh NiMH drive battery is included, and the ready-to-run format means the main components are already in place for immediate use. The official Lexus licence anchors the styling in the real vehicle, giving the front end and overall proportions a recognisable road-going identity. Included contents are the ready-to-run model, remote control with charging connection, NiMH drive battery, screwdriver and instructions. With up to 10 minutes of driving time, the Nano Racer suits quick laps across a desk, short obstacle layouts or side-by-side sessions with other mini RC vehicles. The ability to operate up to 50 vehicles simultaneously also opens the door to compact group racing without the control system getting in each other's way.

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz
1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

Mini RC cars

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

500404337

€17.99

The Lexus LX570 appears here as a compact 1:60 Nano Racer with a licensed body shape, combining SUV styling with radio-controlled driving in a format that measures just 79 mm long, 33 mm wide and 22 mm high. At 25 g, the small chassis stays light in hand and easy to place on short indoor routes, from table-edge slaloms to quick floor runs around everyday obstacles. The set comes as a ready-to-run model with a 2.4 GHz remote control unit, a 1.2 V/80 mAh NiMH drive battery, a screwdriver and instructions. The controller includes a charging connection, so the vehicle can be charged directly through the handset rather than through a separate dock. That compact charging setup keeps the driving system together in one place and suits spontaneous sessions when only a small space is available. The 15 m range gives enough distance for controlled manoeuvres across rooms, while the radio system allows up to 50 vehicles to run simultaneously for club-style races or family competitions. Its small scale makes the Nano Racer easy to store between runs and simple to bring out for short RC sessions without a large driving area. On smooth indoor surfaces, the Lexus LX570 shape and mini dimensions create a neat balance of display appeal and active use, whether the focus is solo driving or lining up several cars for close-quarters racing.

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz
1:8 Akuma Buggy, RC car, 4WD RTR pink

RC buggys

1:8 Akuma Buggy, RC car, 4WD RTR pink

500409083

€399.99

The 1:8 Akuma Buggy brings 4WD traction, brushless power and a bold pink body shell into a ready-to-run off-road setup built for fast runs on dirt, gravel and uneven ground. With a length of 505 mm, a width of 365 mm, a height of 220 mm and a weight of 3909 g, the chassis carries the broad stance and substantial footprint that suit buggy driving beyond smooth surfaces. A 100A drag-style ESC for 4S operation works with the 2050 Kv 3-pole brushless motor, while the cooling fan and aluminum motor heatsink support the electronics during hard acceleration. Steering input is handled by a 20 kg waterproof servo with metal gears, and the adjustable aluminum steering plate adds another tuning point at the front end. The XT90 high-current connector system and quick-change battery mount with Velcro strap keep battery swaps straightforward between runs. Splash-proof electronics and a 3-position adjustable rear spoiler round out a layout aimed at outdoor use. The included Expert Charger Twin LiPo USB-C charges two 7.4 V LiPo batteries simultaneously at 2A each, matching the supplied 2 x 7.4 V 3800 mAh drive packs. A 10 minute ride time suits short, fast sessions on compact tracks, open gravel areas or backyard jumps, with the color-printed body keeping the Akuma look clear at speed. Age 14+  Warning! Not suitable for children under 14 years.

1:8 Akuma Buggy, RC car, 4WD RTR pink
1:8 Rock Wilder, RC car, 100% RTR

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

500404258

€174.99

The 1:8 Rock Wilder RTR brings large-scale off-road driving into a 530 mm chassis with a 355 mm width and 220 mm height, giving the model a broad stance for rough terrain. Its yellow and red bodywork pairs with a type 550 brushed motor and a red anodized aluminum motor heat sink, combining strong drive output with a component setup shaped for sustained running. A quick-change battery mount shortens stops between packs, and the included 7.4 V 3000 mAh Li-Ion drive battery supplies up to 12 minutes of running time. At 2552 g, the model carries enough mass to feel planted as the suspension works across ruts, gravel and uneven ground. The solid impact-resistant front bumper takes the first contact in close running, while the 2.4 GHz radio system supports stable control without the channel conflicts common to older crystal-based sets. Age recommendation: 14 years and over. Loose dirt tracks, compacted paths and rough open ground all suit the Rock Wilder setup, especially where the long wheelbase and off-road tire format can work through changing grip levels. The ready-to-run package includes the remote control, drive battery, USB charger, 4× LR06 transmitter batteries and instructions, so the focus stays on charging the pack and heading out for the next run.  Warning! Not suitable for children under 14 years.

1:8 Rock Wilder, RC car, 100% RTR
1:87 VW Beetle Wintersport, RC car, 2.4 GHz

RC models in 1:87 scale

1:87 VW Beetle Wintersport, RC car, 2.4 GHz

500504149

€109.99

The VW Beetle became one of the most recognisable car shapes of the post-war era, and this 1:87 RC version brings that silhouette into a compact format with working control and winter travel character. The VW Beetle Wintersport pairs micro scale handling with a light blue body, roof rack cargo and ski-themed detailing that stands out on a layout, shelf or small driving course. Its fully proportional control gives measured steering and throttle response instead of simple on-off inputs, which suits careful manoeuvres through model scenery and narrow tabletop routes. The compact chassis works with a very small turning radius, so bends, bridge sections and tighter lane changes feel more natural in limited space. Front and rear LED lights add a clear visual cue during running, especially in dimmer room light or evening diorama scenes. Power comes from a 3.7 V 40 mAh Li-Ion drive battery, and the set includes a 2.4 GHz remote control system plus 4x AAA transmitter batteries for operation. Charging takes place through the transmitter in 45 minutes, making short pauses between runs easy to manage. The ready assembled format puts the focus on driving, collecting and integrating the Beetle into model railway settings, classic car displays or compact indoor RC sessions. Age 14+

1:87 VW Beetle Wintersport, RC car, 2.4 GHz
1:87 VW T1 Samba, RC car, surfboard RTR

RC models in 1:87 scale

1:87 VW T1 Samba, RC car, surfboard RTR

500504181

€104.99

The Volkswagen T1 became one of the most recognisable vans of the post-war era, and this 1:87 VW T1 Samba brings that silhouette into a compact RC format with a surfboard detail and licensed Volkswagen styling. At 50 mm long, 21 mm wide and 19 mm high, the miniature format suits controlled runs on a desk, table or small indoor course where tight manoeuvres matter. The body combines detailed shaping with light blue and white paintwork, giving the Samba look a crisp period character in H0 scale. A weight of 15 g keeps the model light in hand and easy to place on narrow driving lines. The permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time, and charging takes place via the transmitter. The 100% RTR set also includes 4x AAA transmitter batteries and a storage case, so the model is ready for compact RC sessions straight away. Whether used for careful slalom runs between small obstacles or short laps across a tabletop layout, the miniature size and radio control create a focused driving setup in limited space. Age recommendation: 14 years and over.

1:87 VW T1 Samba, RC car, surfboard RTR
6K Reflex Stick Pro 4 WP Receiver, RC receiver

RC receivers and accessories

6K Reflex Stick Pro 4 WP Receiver, RC receiver

500501551

€42.99

The 6K Reflex Stick Pro 4 WP Receiver brings compact radio control hardware to RC vehicles and boats that need dependable 2.4 GHz signal handling in a small format. With 6 channels in a waterproof housing, this receiver supports steering, throttle and additional functions while fitting into installations where space is limited. Its housing measures 46 x 28 x 17 mm and the unit weighs 13 g, so the receiver can be positioned in many chassis layouts without taking up much room. As a replacement receiver, it is made to work with the FS 6K Reflex Stick Pro 4 and the FS 6K Reflex Stick Pro 4 LCD remote controls named in the product data. The 2.4 GHz frequency range supports stable command transmission for models that rely on precise radio response. The 6-channel layout also leaves room for more complex function control than a basic 2-channel setup. In a trail truck, work vehicle, boat or other RC build with several switchable functions, the receiver supports a tidy electronics layout and clear channel allocation. Age 14 Years+

6K Reflex Stick Pro 4 WP Receiver, RC receiver
7.2V 2500mAh NiMH Race Battery, RC battery

NiMH batteries

7.2V 2500mAh NiMH Race Battery, RC battery

500608222

€22.99

Built for RC vehicles and broader model building use, this 7.2 V NiMH race battery combines a 2500 mAh capacity with a Tamiya connector system in a format that fits established hobby setups. The nickel-metal hydride pack is designed as a rechargeable power source for compatible models, making it a practical choice where repeated driving sessions and regular charging cycles are part of the routine. Its specification focuses on the demands of active RC use. A maximum charging current of 2.5 A allows the pack to be charged within the stated limit, while the high current discharge characteristic supports applications that draw stronger power under load. That combination suits a wide range of electric model uses, from vehicle platforms to other model building applications that rely on a 7.2 V battery with this connector format. The pack format with bundled cells, power leads and plug connection follows the familiar layout used across many hobby systems. In use, the battery slots naturally into workshop preparation, replacement planning and regular running sessions with compatible RC models. Age marking: 14 years. Whether kept as a spare pack for longer track time or used as the main power source in a compatible chassis, it brings clear, stated electrical data to the setup.

7.2V 2500mAh NiMH Race Battery, RC battery
AB.205 / UH-1D SAR Helicopter Model Kit 1:48

Model helicopters

AB.205 / UH-1D SAR Helicopter Model Kit 1:48

510002845

€27.49

The Italeri AB.205 / UH-1D "SAR" presents the Agusta-Bell AB-205 as a detailed 1:48 scale helicopter build, capturing the form of a multirole aircraft developed in Italy under license from the Bell UH-1 Iroquois, widely known as the "Huey." The search-and-rescue version gives the finished model a clear operational identity, with the familiar utility-helicopter layout translated into a compact display scale. The full-size AB-205 entered service in the 1960s and was developed for rapid transport into areas that were difficult to reach, a role that shaped its broad, functional airframe. The aircraft combined structural simplicity with a configuration that could be adapted for military and civilian duties, including cargo transport, medical evacuation, civil protection and search-and-rescue missions. The original helicopter had a flight range of over 500 km and a maximum speed exceeding 200 km/h, details that underline the capable design behind this replica. That background gives the model extra depth on the workbench and in a finished collection, especially alongside other rotary-wing aircraft from the same era. The AB-205 also served in the aviation units of the Arma dei Carabinieri, adding a further real-world service context to this SAR-focused subject.  Warning! Not suitable for children under 14 years.

AB.205 / UH-1D SAR Helicopter Model Kit 1:48
Alfa Romeo 8C 2300 1931-33 Model Kit 1:12

Model car kit

Alfa Romeo 8C 2300 1931-33 Model Kit 1:12

510104708

€169.99

The Italeri Alfa Romeo 8C 2300 1931-33 model kit in 1:12 scale brings one of the defining sports cars of the 1930s into a 32.0 cm format with strong visual presence on the bench and on display. Its long bonnet, open 2-seat body and period racing proportions give the finished car the unmistakable character linked to the 8-cylinder supercharged original with 2,336 cc. This assembly kit is built from 320 parts, joined by 30 chromed parts and further refined with photoetched parts, screws, tubes and nylon net. The opening cowling allows the engine area to stay visible after assembly, so the highly detailed engine remains part of the finished presentation rather than disappearing under the bodywork. Steering wheels and realistic suspension add working-style detail to the structure and help the model reflect the mechanical layout of the full-size car. Rubber tires complete the wheel setup with a material and surface finish that suit a classic roadster of this era. The subject draws on the Alfa Romeo 8C line that became closely associated with international racing success and the name of Tazio Nuvolari, while this version focuses on the 2-seat Sport road car from 1931-33. With an assembly time of 600 minutes and an age marking of 14 Years, the kit suits a measured, detail-led build where body, engine and trim come together step by step into a substantial historic display model.

Alfa Romeo 8C 2300 1931-33 Model Kit 1:12
Alfa Romeo 8C 2300 Monza Nuvolari Model Kit

Model car kit

Alfa Romeo 8C 2300 Monza Nuvolari Model Kit

510004706

€169.99

The Italeri Alfa Romeo 8C 2300 Monza Nuvolari model kit captures one of the best-known racing cars of the 1930s in a large 1:12 scale with a finished length of 32.0 cm. Its long bonnet, open cockpit and exposed wheel layout give the completed car a strong period racing presence, whether it stands in a cabinet or takes shape step by step on the workbench. This assembly kit is built around 100% new moulds and combines 300 parts with 30 chromed parts, photoetched parts and rubber tires. The opening cowling adds a functional display feature while also framing the highly detailed engine once the build is complete. Steering wheels and realistic suspension add further mechanical character, and the extra detailing materials such as screws, tubes, rope and nylon net widen the finishing options across the body and chassis. The included colour instruction sheet supports the long 600 minute assembly process with a clear visual guide. The full-size Alfa Romeo 8C 2300 Monza took its name from the twin-seater Grand Prix car linked to Tazio Nuvolari and the Italian Grand Prix at Monza. That racing history gives the finished replica a clear motorsport identity, especially when the body markings and trim are applied. Age recommendation: 14 Years.

Alfa Romeo 8C 2300 Monza Nuvolari Model Kit
Alfa Romeo Giulietta Spider 1300 Model Kit 1:24

Model car kit

Alfa Romeo Giulietta Spider 1300 Model Kit 1:24

510003653

€37.99

The Italeri Alfa Romeo Giulietta Spider 1300 in 1:24 scale turns a celebrated Italian convertible into a detailed model kit with classic proportions and a compact finished length of 16.2 cm. The body shape, bright trim and open roadster layout give the build a distinctly early 1960s character, while the closed-roof option adds another authentic configuration drawn from the same car. This assembly kit is built around more than exterior form alone. The detailed engine gives the model a mechanical focal point, so the build is not limited to body panels and trim. Chrome parts define key accents across the car and sharpen the contrast between painted surfaces and metallic details. A colors instruction sheet supports accurate finishing choices during the 600-minute assembly process, which suits model builders aged 14 years and up. The subject itself reflects the 1962 evolution of the Giulietta Spider, when Alfa Romeo introduced bodywork updates, interior refinements and a larger 1,570 cm3 four-cylinder engine. On the bench, the 1:24 scale leaves room for careful paintwork, trim placement and engine detailing. Once completed, the 16.2 cm model sits comfortably on a shelf, in a display case or alongside other classic car builds, where the Spider profile, chrome highlights and optional closed capote give it a strong period presence.

Alfa Romeo Giulietta Spider 1300 Model Kit 1:24
AMX Ghibli Aircraft Model Kit 1:72 Scale

Military aeroplane models

AMX Ghibli Aircraft Model Kit 1:72 Scale

510001460

€29.99

The Italeri AMX Ghibli model kit brings a modern military aircraft into 1:72 scale with newly tooled parts, photo-etched details and markings for 4 versions. The finished build reflects the high swept wing layout of the original AMX "Ghibli", a single-engine ground attack aircraft developed through cooperation between the Italian and Brazilian aviation industries. This assembly kit is made for hands-on construction and finishing, with 600 minutes of assembly time supporting a more involved build. The aircraft represented here was developed in the 1980s to replace the Fiat G-91Y in Italian service, while Brazil also used the programme to replace the MB-326. The original aircraft used a Rolls-Royce Spey 807 engine and could reach 1,000 km/h. Italian service aircraft carried a 20 mm M61 cannon and an offensive payload of 3,800 kg, details that give the subject its distinct operational identity. On the workbench, the 1:72 format suits careful painting, decal placement and display planning without demanding excessive space. Once completed, the AMX Ghibli sits naturally in a modern military aviation collection, whether displayed as a single aircraft or alongside other late Cold War and post-Cold War jet subjects. Paints are required separately.  Warning! Not suitable for children under 14 years.

AMX Ghibli Aircraft Model Kit 1:72 Scale
AS 42 Sahariana Model Kit 1:72 Desert Scout

Model tanks

AS 42 Sahariana Model Kit 1:72 Desert Scout

510097044

€13.49

The Italeri AS 42 Sahariana model kit captures a distinctive World War II desert reconnaissance vehicle in 1:72 scale, combining compact dimensions with the purposeful layout developed for long-range operations in North Africa. Based on the chassis and mechanics of the AB 41, the original Camionetta Desertica modello 42 Sahariana was shaped for sand terrain, and that specialised role gives the finished replica its unmistakable profile. The open body, low side sections and external stowage create a build with plenty of visible structure once assembled. Fine parts for the chassis, wheels, interior elements and mounted equipment give the model a layered look that rewards careful painting and detail work. The subject is especially notable for its operational flexibility, as the real vehicle could appear with different armament configurations including a Breda 20/65 mod 1935 machine gun, a 47/32 anti-tank gun or a 20 mm Solothurn anti-tank rifle. Decals for 2 versions extend the historical finish options for the completed replica. On the bench, the 1:72 scale keeps the project manageable while still leaving room for crisp military detailing. Once finished, the AS 42 Sahariana sits naturally in a desert campaign display, a World War II vehicle lineup or a compact wargaming collection with period character and strong visual presence.  Warning! Not suitable for children under 14 years.

AS 42 Sahariana Model Kit 1:72 Desert Scout
Black Thunder Truck Model Kit 1:24 Scale

Model trucks

Black Thunder Truck Model Kit 1:24 Scale

510090727

€69.99

Black Thunder brings the customized Mack Superliner into 1:24 scale as a detailed plastic kit with a bold show-truck presence. The glossy black livery gives the finished truck a striking silhouette, while the Australian styling direction sets it apart from a standard road-going version. The full-size Black Thunder kept the original mechanical base and added tuning modifications that changed both its appearance and its engine and exhaust character. That background gives the model a clear identity during assembly, with each stage centered on a truck built around personalization rather than fleet uniformity. The Mack Superliner name also connects the subject to a vehicle that found commercial success beyond the United States, especially in Australia, where private owners and specialist body shops created highly individual machines. In model form, that context adds depth to the finished build and places the truck within a culture of custom transport design. On a shelf, in a workshop corner or as part of a transport collection, the Black Thunder theme stands out through its dark finish and event-focused character. The 14 Years+ marking and detailed kit format suit builders who want a truck subject shaped by custom aesthetics rather than standard factory trim.  Warning! Not suitable for children under 14 years.

Black Thunder Truck Model Kit 1:24 Scale
BMW R75 Military Motorcycle with Sidecar 1:9

Model motorcycles

BMW R75 Military Motorcycle with Sidecar 1:9

510007403

€65.99

The Italeri BMW R75 German Milit.Motor.w/Sidecar brings a distinctive wartime motorcycle to the workbench in 1:9 scale, with a finished model length of 26.7 cm that gives the sidecar layout, exposed engine and military fittings real visual presence. As a detailed assembly kit, it focuses on the characteristic engineering of the original BMW R75 rather than a simplified display piece. The full-size motorcycle entered production in 1941 after a joint BMW and Zundapp development brief aimed at using as many common components as possible for maintenance and spare-parts logistics. Its most unusual feature was the driven sidecar wheel, linked to the motorcycle through an axle system and supported by a locking differential with selectable gear ratios for on-road and off-road use. The original twin-cylinder 750 cc engine delivered 26 HP and a top speed of 95 km/h, giving the model a strong historical and mechanical background. The kit also offers decals for 4 versions, allowing the finished build to reflect different unit markings and service appearances. During assembly and finishing, the large 1:9 scale gives painted details, stencilling and weathering more room to stand out across the motorcycle, sidecar and mounted equipment. The completed model suits shelf display, diorama settings or a military vehicle collection where the combination of motorcycle, sidecar and period markings adds a different silhouette from standard armoured subjects.

BMW R75 Military Motorcycle with Sidecar 1:9
Bugatti Coupe Napoleon 1:24 Detailed Plastic Kit

Model car kit

Bugatti Coupe Napoleon 1:24 Detailed Plastic Kit

510013705

€36.99

The Bugatti Coupe Napoleon arrives as a 1:24 detailed plastic kit based on the Type 41 Royale, a car built by Bugatti between 1929 and 1933 in only 6 units. In scale form, the long silhouette, formal roofline and imposing proportions give the finished build the presence associated with one of the most exclusive cars in automotive history. The source subject stands apart through its extraordinary engineering and coachbuilt identity. The original Type 41 used a shared chassis and engine across the 6 cars, while each version differed in bodywork configuration, and the Coupe Napoleon was the first in chassis order. The historical reference also names an engine displacement of over 12,000 cm3, underlining the exceptional scale of the full-size car behind this kit. Its two-tone black and blue bodywork and velvet interior are central visual cues for the build, shaping a display model that reflects Ettore Bugatti's private car and a recognised icon of world automotive production. On the bench, the 1:24 format gives room to appreciate the car's distinctive length and stately proportions as the body takes shape. Once completed, the model fits naturally into a classic car collection, a period automotive display or a line-up focused on landmark European grand touring design.

Bugatti Coupe Napoleon 1:24 Detailed Plastic Kit
Bugatti Type 35B 1:12 racing car model kit

Model car kit

Bugatti Type 35B 1:12 racing car model kit

510004716

€169.99

The Italeri Bugatti Type 35B 1:12 racing car model kit brings one of motorsport's defining machines into a large display scale with the long body, open cockpit and signature horseshoe-shaped radiator grille clearly expressed in the finished build. Based on the Bugatti Type 35B linked to Targa Florio and Monaco Grand Prix racing history, the model carries the character of a 1920s competition car with exposed details and a focused mechanical layout. The subject itself is rich in engineering detail. The original car used an 8-cylinder 2,263 cc engine, a 4-speed manual gearbox and a supercharger, and that technical identity shapes the model's appeal beyond its bodywork alone. New parts expand the build, while the opening cowling creates direct access to the engine area once assembled. Artificial leather, chromed parts, photoetched parts, screws, tubes and a die-cut masking sheet support a finish with varied textures and sharper detailing across key sections. The large 1:12 scale also gives the spoked wheel design, cockpit area and external race-car proportions more room to stand out. On the bench, the build suits careful painting, masking and detail work across the body, engine bay and cockpit. Once completed, the model carries the visual drama of a pre-war Grand Prix car, whether placed in a collection, photographed close up or displayed to highlight its racing silhouette and exposed mechanical character.  Warning! Not suitable for children under 14 years.

Bugatti Type 35B 1:12 racing car model kit
Cagiva Elephant 850 Winner 1987 Model Kit 1:9

Model motorcycles

Cagiva Elephant 850 Winner 1987 Model Kit 1:9

510104643

€64.99

The Italeri Cagiva Elephant 850 Winner 1987 model kit brings a landmark Paris-Dakar rally motorcycle into a large 1:9 scale format, with a finished length of 23.8 cm that gives the fairing, seat profile and off-road layout clear visual impact on display. Based on the 1987 race machine, the build captures the distinctive desert configuration that set the original bike apart in endurance competition. The full-size motorcycle combined a steel tube and light alloy trellis frame with an air-cooled twin-cylinder engine rated at 80 HP at 8500 rpm, and the bodywork was shaped around a large protective fairing. Italeri supports that character with a detailed plastic kit that also includes rubber parts, screws, springs and rubber tubes, adding extra texture and mechanical definition during the build. The decal sheet carries race numbers, sponsor markings, instrument details and body striping used to recreate the period rally livery with precision. With an assembly time of about 600 minutes, this kit suits builders who enjoy a longer bench session centered on painting, fitting and finishing. The completed motorcycle stands out in a display case, on a workshop shelf or as part of a motorsport collection, where the Dakar-inspired silhouette, tall front section and competition graphics remain easy to read from across the room.

Cagiva Elephant 850 Winner 1987 Model Kit 1:9
CANT Z.1007 Alcione model kit 1:72 aircraft

Model aircraft

CANT Z.1007 Alcione model kit 1:72 aircraft

510001479

€33.49

The CANT Z.1007 Alcione model kit in 1:72 scale recreates an Italian medium bomber that entered service in the late 1930s and saw extensive use with the Regia Aeronautica during the Second World War. Its defining 3-engine configuration gives the aircraft a distinctive silhouette on the workbench and in a finished display, while the historical subject adds clear context for builders drawn to military aviation. Designed by Filippo Zappata, the original CANT Z.1007 Alcione combined a wooden structure with 3 Piaggio P.XI radial engines, each rated at 1,000 hp. That power allowed the bomber to reach a maximum speed of 450 km/h. The aircraft also carried up to 1,200 kg of offensive payload in an internal bomb bay, a detail that underlines its role as a medium bomber rather than a transport or patrol aircraft alone. Crew capacity was typically 5 men, rising to 6 when a photographic operator joined reconnaissance and maritime patrol missions. The subject connects this 1:72 build to the Mediterranean, Balkan and North African theatres where the aircraft was mainly deployed. With an age marking of 14 years and up, the kit suits builders looking for a historically grounded aircraft project with a clearly documented wartime background and a recognisable tri-motor layout.  Warning! Not suitable for children under 14 years.

CANT Z.1007 Alcione model kit 1:72 aircraft
CANT Z.501 Gabbiano model kit 1:72 seaplane

Military aeroplane models

CANT Z.501 Gabbiano model kit 1:72 seaplane

510000112

€30.99

The Italeri CANT Z.501 Gabbiano brings a distinctive Italian flying boat into 1:72 scale, capturing the long central hull, broad high wing and stabilising lateral floats that defined this maritime reconnaissance aircraft. As a detailed assembly kit, it turns the unusual seaplane layout into a focused build with a strong display presence once the airframe is complete. The original CANT Z.501 was developed in the 1930s by engineer Filippo Zappata for Cantieri Riuniti dell'Adriatico and served in patrol, search and rescue, and reconnaissance roles at sea. Its full-size configuration used a 900 HP Isotta Fraschini Asso XI engine and reached a maximum speed of 275 km/h, details that place the model within a clearly documented aviation context. The aircraft entered operational service during the Spanish Civil War and later saw extensive use by the Regia Aeronautica in the Mediterranean theatre during World War II. Defensive armament on the original aircraft consisted of three 7.7 mm Breda-SAFAT machine guns, and it could also carry a limited offensive payload. With about 600 minutes of assembly time, the build suits sessions that reward careful painting, decal placement and attention to the aircraft's float-equipped wing arrangement. The super decals sheet for 4 versions opens different finishing directions for a shelf display centred on interwar and World War II Italian naval aviation. Recommended from 14 years.  Warning! Not suitable for children under 14 years.

CANT Z.501 Gabbiano model kit 1:72 seaplane
Commando Car 1:35 Scale Model Kit with Figure

Model tanks

Commando Car 1:35 Scale Model Kit with Figure

510000320

€12.49

The Italeri Commando Car presents a compact 1:35 scale military vehicle kit with a finished length of 9.5 cm and the open layout of a modified airborne jeep. Its proportions, exposed cabin and field equipment create a focused display piece that brings reconnaissance and commando vehicle history onto the workbench in a manageable format. The build is shaped around distinct subassemblies, including the interior tub, radiator and grille section, ladder-style chassis, suspension parts, wheels and exterior fittings. Instruction stages show steering and control details, seat assemblies, stowage pieces, a spare wheel and multiple weapon mounts, giving the model a layered mechanical look rather than a simplified silhouette. The subject is based on a wartime vehicle adapted for infantry support and rapid raids, with 5 machine guns and additional fuel capacity of 135 l in the original configuration. A crew figure is included to add scale contrast and strengthen diorama placement. On a shelf, in a military vehicle lineup or as part of a terrain scene, the Commando Car reads clearly through its low body, exposed seating and heavily equipped profile. Assembly is required, with a stated build time of 600 minutes. Paints, tools and cement are required separately.

Commando Car 1:35 Scale Model Kit with Figure
Confederate Cavalry Model Kit 1:72 Civil War

Model figures

Confederate Cavalry Model Kit 1:72 Civil War

510006011

€10.99

Italeri Confederate Cavalry brings American Civil War mounted troops into 1:72 scale with an assembly kit built for historical displays, painted collections and battlefield dioramas. The set centres on cavalry figures and horses with varied poses, giving the finished scene the movement of a charge, a patrol or a formed mounted unit across terrain, roads or camp edges. The source material for the set points to Confederate cavalry regiments and their distinctive uniform details, including yellow trim, while also noting varied personal weapons and customised dress. That mix gives the finished group a less uniform field appearance than parade troops and suits scenes that aim to show the irregular character of wartime cavalry service. The sprues show riders with sabers and firearms, horse poses in motion, and a fallen horse part that can change the tone of a diorama from formal display to active combat. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a cabinet or across a wargaming table, the 1:72 scale makes the set easy to combine with other American Civil War miniatures, terrain pieces and period artillery. Careful painting can bring out saddle gear, hats, jackets and horse tack, while grouped placement can suggest a fast-moving attack line or a command element within a broader historical scene.

Confederate Cavalry Model Kit 1:72 Civil War
Crusader Mk.III Tank Kit with British Crew 1:35

Model tanks

Crusader Mk.III Tank Kit with British Crew 1:35

510006592

€36.99

The Italeri Crusader Mk.III with British Crew brings a key British cruiser tank of the Second World War into 1:35 scale, pairing the later Mk.III configuration with a full crew scene for a display that goes beyond the vehicle alone. The build centers on the Crusader's desert-war profile, with its 6 pdr cannon and the distinctive running gear layout that made the type notable in rough terrain operations. This plastic kit is designed as a detailed assembly project and lists an assembly time of 600 minutes, giving the tank and figures room for a more involved finish. The Christie suspension with large diameter rolling wheels is part of the Crusader's defining engineering, and that layout gives the completed model a recognisable stance. Gluable rubber tracks shape the lower hull with flexible track runs, while the marking sheet supplies decals for 3 versions with serial numbers and tactical signs. The set also contains 9 figures, opening up options for command, maintenance and rest-scene arrangements around the tank. On a shelf, in a desert diorama or as part of a wider WWII armour collection, the combination of vehicle and crew creates a fuller historical scene than a tank alone. Paints and tools are required separately.

Crusader Mk.III Tank Kit with British Crew 1:35
CS-10 Digital Servo, RC servo, waterproof

RC servos

CS-10 Digital Servo, RC servo, waterproof

500502051

€31.99

Compact RC control systems rely on a servo that turns radio signals into exact movement, and the CS-10 Digital Servo is built for that task with digital regulation, waterproof construction and a JR plug layout. The black housing with metallic centre section and splined output shaft is shaped for installation in common model applications where steering, throttle or other linkages need controlled travel. Its 0.17-second response supports quick actuation, while the 10 kg torque rating provides the force needed for demanding control duties. Ball bearings support the output shaft for smooth running, and the metal gear train is designed for direct transfer of servo movement to the connected horn and linkage. Included mounting hardware expands setup options with a single-arm horn, an X-shaped horn with multiple linkage holes, rubber grommets and a fastening screw. The 3-wire lead uses the familiar red, black and white layout seen across many RC installations. In an RC car, the servo can manage steering inputs through the splined shaft and horn geometry; in a boat or other hobby mechanism, it can drive throttle or moving control parts with the same compact format. The waterproof design also suits outdoor running where spray and damp conditions are part of the session.  Warning! Not suitable for children under 14 years.

CS-10 Digital Servo, RC servo, waterproof
CS-17 Digital Servo, RC servo, waterproof

RC servos

CS-17 Digital Servo, RC servo, waterproof

500502052

€34.99

The CS-17 brings digital servo control, waterproof construction and 17 kg actuating force into a compact RC component built for precise movement in demanding model setups. With a stated speed of 0.19 sec and a JR connector on the 3-wire lead, it suits steering, throttle and brake functions where clean signal response and dependable installation matter. The housing combines black end caps with a silver centre section, and the top output shaft is metal with a splined interface for secure horn mounting. Side tabs with screw holes support fixed installation in model vehicles or boats, while the included single-arm horn and 4-arm horn offer different linkage layouts. Multiple adjustment holes on the horns make it possible to alter leverage and control travel to match the mechanism in use. Rubber grommets are included for vibration-damped mounting, and the central fixing screw secures the horn to the output shaft. In an on-road chassis, off-road build or boat hull, the servo can be assigned to the moving function that needs measured, repeatable input. The combination of digital operation, waterproof design and included mounting hardware makes the CS-17 a focused choice for hobby workbenches, replacement jobs and fresh RC builds.  Warning! Not suitable for children under 14 years.

CS-17 Digital Servo, RC servo, waterproof
CS-7 Digital Servo, RC servo, waterproof

RC servos

CS-7 Digital Servo, RC servo, waterproof

500502050

€29.99

The CS-7 Digital Servo brings fast digital control to RC installations that need crisp, repeatable movement. With a stated transit time of 0.17 s, this regular-size servo suits steering, throttle or other control functions where quick response and accurate linkage travel matter. The black and silver housing carries a waterproof design, adding flexibility for models that run in wet grass, on damp ground or around spray. Inside the compact case, the servo combines a 7 kg force rating with ball bearing support at the output shaft. That layout helps the spline run smoothly when the horn changes direction under load. The top output shaft accepts the supplied servo horns, including a single-arm horn and a 4-arm horn with multiple linkage holes for different geometry choices. Mounting tabs on the case and the included rubber grommets support secure installation in a chassis, frame or other model structure. The attached 3-wire lead uses a JR plug for connection to compatible radio systems. In cars, boats, aircraft or other hobby mechanisms, the CS-7 Digital Servo fits wherever controlled rotary movement needs to be translated into precise mechanical action. Age marking: 14 years  Warning! Not suitable for children under 14 years.

CS-7 Digital Servo, RC servo, waterproof
Cyber Copter IR 2Ch RTF, helicopter, blue

RC helicopters

Cyber Copter IR 2Ch RTF, helicopter, blue

500507193

€21.99

The Cyber Copter IR 2Ch RTF blue brings a futuristic helicopter shape together with ready-to-fly handling for fast access to indoor model flying. Its slim fuselage width of 38 mm, blue finish and switchable LED position lights create a crisp look in the air, especially when flights continue into lower evening light. Infrared control keeps the handling focused on the core 2-channel functions, while the integrated gyroscope supports stable flight behaviour during turns and hovering corrections. Left and right trim adjustment allows the flight path to be tuned more precisely to the room and control input. The helicopter reaches speeds of up to 10 km/h, giving short indoor runs enough pace to feel lively without overwhelming the compact format. At 230 mm long and 95 mm high, with a rotor diameter of 190 mm, the model stays manageable in smaller spaces. The low takeoff weight of 35 g adds to that controlled character during living room or hobby room sessions. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime, and charging runs through USB for straightforward turnaround between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 x LR03 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8+

Cyber Copter IR 2Ch RTF, helicopter, blue
Cyber Copter Rescue, RC helicopter, 2.4GHz

RC helicopters

Cyber Copter Rescue, RC helicopter, 2.4GHz

500507195

€25.99

The Cyber Copter Rescue brings compact rotor flight into a ready-to-fly format with a futuristic body, a 190 mm rotor diameter and a 2-channel 2.4 GHz radio system. At 230 mm long, 95 mm high and only 35 g in takeoff weight, the model is sized for controlled indoor flying, where short lift-offs, hovering practice and gentle turns can happen in a smaller space. Its 3.7 V 150 mAh LiPo flight battery delivers up to 8 minutes of runtime and supports speeds of up to 10 km/h. Charging runs via USB, making the battery easy to top up from common USB power sources between sessions. The transmitter operates the flight direction and the LED position lights, while the trim function allows left and right correction to match the room and handling input. The integrated gyroscope works continuously in the background to steady the helicopter during flight. Included in the set are the ready-to-fly model, the 2.4 GHz remote control, a USB charger, 3 LR03 AAA transmitter batteries and a manual. The age marking is 8 years. Short practice flights in a living room, hobby room or other indoor area suit the compact dimensions well, especially when learning how throttle and steering interact in the air.

Cyber Copter Rescue, RC helicopter, 2.4GHz
Cyber Drone IR RTF, quadcopter, 360° flip

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flip

500507190

€25.99

Compact dimensions and quick-response controls give the Cyber Drone IR RTF a lively indoor flight character, with a 125 mm length, 135 mm width and 150 mm diameter that keep the quadcopter agile in smaller spaces. The 45 mm rotor diameter and 50 g ascent weight support a light, nimble feel in the air, while the red finish and blue LED lighting make the flight path easy to follow during turns and short hovering runs. The control setup focuses on clear handling rather than complexity. Individually adjustable trim allows left and right correction when the quadcopter drifts, and the gyro helps keep movements more settled during take-off, hovering and directional changes. A button-triggered Coming Home function returns the quadcopter to its home point, adding a direct control shortcut during indoor sessions. The 360° flip function brings a distinct stunt element, and the 3 speed settings make it easy to switch between measured practice laps and faster reactions. 8Y+. With an 8 minute flight time, the model suits short flying sessions in living rooms, hobby spaces or other open indoor areas where compact manoeuvres and quick turns come into play. A replacement battery with 3.7 V, 600 mAh and Molex connector is available separately for extended session planning

Cyber Drone IR RTF, quadcopter, 360° flip
Cyber Drone IR RTF, quadcopter, 360° flips

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

500507189

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a format built for quick lift-off and controlled indoor sessions. Its 125 mm length, 135 mm width and 150 mm diameter keep the frame small and nimble, while the 45 mm rotor diameter and 50 g ascent weight support a light, responsive feel as the orange drone moves through turns, short climbs and hovering passes. The Coming Home function returns the quadcopter to its home point at the touch of a button, adding a clear control step during flight. Flight time reaches 8 minutes per charge, powered by the included 3.7 V 600 mAh LiPo flight battery. The ready-to-fly package also includes the IR remote control and a USB charger, so the core flying equipment is already part of the set. EN 71, EN 62115 and EN 4709-001 compliance is stated in the product data, and the age marking is 8 years. Short practice flights, button-triggered flips and pace changes across the 3 speed levels give each session a distinct rhythm. Blue flashing LEDs stay visible as the drone circles through a room, rises for a quick stunt, then settles back into controlled directional inputs.

Cyber Drone IR RTF, quadcopter, 360° flips
Cyber Drone Space Taxi, quadcopter, 2.4 GHz RTF

RC quadcopters

Cyber Drone Space Taxi, quadcopter, 2.4 GHz RTF

500507187

€34.99

The Cyber Drone Space Taxi 2.4G 100% RTF brings compact quadcopter flying into a 125 mm long and 135 mm wide format with a 150 mm diameter and 45 mm rotor diameter. Its ready-to-fly setup, 2.4 GHz remote control system and 3.7 V 600 mAh LiPo flight battery put the focus on lift-off, hovering and short directional inputs with minimal preparation. With a flight time of 8 min and an ascent weight of 50 g, the model stays light in the air and easy to handle in compact spaces. A one-button Coming Home function sends the quadcopter back toward its home point, adding a clear control aid during short flight sessions. The included flight battery matches the stated 3.7 V and 600 mAh specification, and the data also names a replacement battery with a Molex connector for continued use across multiple sessions. The 2.4 GHz control system supports responsive command input without cable connections, fitting the quick, agile character of a small rotorcraft. Short indoor flights, first hovering practice and simple stunt runs all suit this format well. With an age marking of 8 years, the Cyber Drone Space Taxi fits entry-level remote-control flying where compact dimensions, visible lighting and button-based functions keep each session active and easy to follow.

Cyber Drone Space Taxi, quadcopter, 2.4 GHz RTF
DAF 95 Master Truck 1:24 scale model kit

Model trucks

DAF 95 Master Truck 1:24 scale model kit

510000788

€59.99

The Italeri 1:24 DAF 95 Master Truck ZgM captures the flagship character of the Concept 95/380 in a scale model kit shaped around the high-roof Space Cab tractor unit. The cab-over layout, tall roofline and three-axle rear arrangement give the finished truck the distinctive long-haul stance that made the original DAF 95 stand out on European roads. The full-size vehicle was developed as a further step in the Space Cab series, and this kit reflects that more advanced design through its body lines, grille treatment and marked 95 380 ATI identity. The original truck paired a 6-cylinder ATI Advanced Turbo Intercooling engine with a soundproof cabin and advanced shock absorbers, details that define the character of the subject being built here. Visible truck elements such as the side mirrors, steps, tank sections, rear mudguards and under-run protection help create a more complete tractor-unit silhouette once assembled. The included decal sheet extends that realism with cab stripes, instrument panel details, country plates and small service markings. With a stated assembly time of 600 minutes, the build lends itself to a steady bench session where painting, decal placement and final detailing shape the result. Paints are required separately. Once completed, the model fits naturally into truck collections, workshop shelves or transport dioramas, where the Space Cab profile and fifth-wheel layout give it a clear heavy-haul identity.  Warning! Not suitable for children under 14 years.

DAF 95 Master Truck 1:24 scale model kit
Dornier Do 217 K-1/K-2 Aircraft Kit 1:72

Model aircraft

Dornier Do 217 K-1/K-2 Aircraft Kit 1:72

510001488

€36.99

The Italeri Dornier Do 217 K-1/K-2 with Fritz-X guided bombs captures a distinctive World War II aircraft in 1:72 scale, combining the broad wing layout, twin-engine configuration and glazed nose of the Luftwaffe bomber in a detailed plastic kit. The subject represents the Do 217K variant, developed with a reinforced fuselage, redesigned wing surfaces and upgraded engines, and adapted to carry the Ruhrstahl SD 1400 Fritz X on an underwing pylon. The build is shaped around multiple injection-molded sprues with finely engraved surface detail, separate fuselage halves, wing sections, propellers, landing gear parts and transparent canopy elements. These clear parts help define the cockpit area and nose glazing, while the external stores and pylon components give the finished aircraft its characteristic guided-bomb configuration. The decal sheet, screen printed by Cartograf, is arranged for 6 versions and adds crosses, code letters, serial markings and maintenance stencils for a more complete historical finish. Figures are not included. On the workbench, the combination of structural airframe parts, clear glazing and detailed markings supports a focused aircraft build with plenty of painting and finishing work. Once assembled, the 1:72 scale format suits shelf display, diorama use or a line-up with other historic aircraft subjects from the same era.  Warning! Not suitable for children under 14 years.

Dornier Do 217 K-1/K-2 Aircraft Kit 1:72
Drive Shaft Set, RC accessory, 1:14 universal

Basic accessories

Drive Shaft Set, RC accessory, 1:14 universal

500907004

€33.99

A universal drive shaft is one of the key links in an RC drivetrain, and this 1:14 set is built to adapt that link to the chassis at hand. The 112 mm shaft can be cut to length, making it suitable for model-building projects where the driveline needs a more exact fit than a fixed-length part can offer. The set uses aluminium and steel, combining a lightweight shaft material with metal connection parts for the rotating assembly. Alongside the main shaft, the contents include 2 dog bones and 2 adapters, so the core coupling parts are already part of the set. That makes this accessory useful for replacement work on an existing model as well as for custom builds that need a universal driveline connection. The 1:14 scale note keeps the application focused on compatible model sizes rather than full-size hardware. On the workbench, the cut-to-length format supports cleaner adaptation to different chassis layouts and wheelbase requirements. In running models, the assembled shaft serves the practical task it is built for: transferring rotation through the driveline between connected components in a compact metal setup.

Drive Shaft Set, RC accessory, 1:14 universal
DUKW Amphibious Truck Model Kit 1:72 Scale

Model tanks

DUKW Amphibious Truck Model Kit 1:72 Scale

510007022

€15.99

The Italeri 1:72 DUKW Amphibious truck model kit brings a historic military transport into a compact build with the unmistakable shape of its amphibious hull and 6x6 layout. At about 117 mm in length, the finished model fits neatly into display cabinets, convoy scenes or beach landing dioramas while still leaving room for painted detail across the cab, cargo area and hull sides. The full-size DUKW was developed from the General Motor CCKW-353 2 1/2 t tactical transport truck to move loads quickly from ships to beaches during landing operations. Its 4,400 cm3 6-cylinder engine, three differentials and six driving wheels formed the mechanical basis, while the welded hull with horizontal rib reinforcement gave the vehicle its amphibious role. This kit translates that distinctive combination into a detailed plastic build that invites careful assembly, painting and finishing. Decals for 1 version are included to add markings once construction is complete. The subject suits historically focused model collections and WWII scene building, especially where transport vehicles add context beyond tanks and artillery. Assembly is required and the stated assembly time is 600 minutes. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

DUKW Amphibious Truck Model Kit 1:72 Scale
DUKW Amphibious Vehicle Model Kit 1:35 Scale

Model tanks

DUKW Amphibious Vehicle Model Kit 1:35 Scale

510006392

€32.99

The Italeri 1:35 DUKW Amphibious Vehicle model kit brings a landmark military transport into a detailed scale build, combining the long 6x6 layout of the General Motor CCKW-353 with the welded hull that allowed the full-size vehicle to move between ship, surf and shore. In model form, that unusual combination gives the finished subject a striking silhouette, with truck running gear set into a boat-shaped body built for amphibious operations. The original vehicle used a 4,400 cm3 6-cylinder engine, three differentials and 6 driving wheels, and those engineering roots shape the character of this kit. Horizontal rib reinforcement on the hull adds another defining visual feature, setting the DUKW apart from standard transport trucks of the period. The full-size vehicle could carry a 2,400 kg payload or 25 fully equipped troops, which explains its broad use by the U.S. Army, U.S. Marines and Allied forces across multiple theatres of war. This edition also includes a new decal sheet for 4 versions, opening several historically grounded finishing directions for the completed model. The subject suits builders drawn to WWII logistics vehicles, beach landing scenes and transport-focused dioramas. Markings linked to operations such as Normandy, Salerno, Anzio and Pacific landings give the completed build a strong historical setting, whether placed on a display shelf or worked into a larger coastal scene.

DUKW Amphibious Vehicle Model Kit 1:35 Scale
EA-18G Growler Aircraft Model Kit 1:48 Scale

Military aeroplane models

EA-18G Growler Aircraft Model Kit 1:48 Scale

510002824

€43.99

The Italeri 1:48 EA-18G Growler brings a modern carrier-based electronic warfare aircraft into scale form with the long, twin-seat fuselage and naval jet profile derived from the F/A-18F Super Hornet. As a detailed plastic kit, it focuses on the specific configuration that sets the Growler apart, including the dedicated electronic warfare installation in place of the standard 20 mm cannon and the external stores associated with its mission. The full-size aircraft uses General Electric engines and reaches a maximum speed of Mach 1.8, with flight performance described as similar to the main carrier-based aircraft in U.S. Navy service. The real aircraft operates with a 2-man crew made up of a pilot and a WSO, and that tandem arrangement shapes the cockpit and canopy layout of the model. Marking options shown for the kit cover 3 aircraft versions, including U.S. Navy VAQ-134, U.S. Navy VAQ-137 and Australian 6 Squadron subjects. The decal sheet also extends to instrument panels, external fuel tank markings, AIM-120 details and AN/ALQ99 pod markings, supporting a more complete finishing stage. With a stated assembly time of 600 minutes, this kit suits a slower, detail-led build on the workbench and a display finish once complete. Paints, tools and cement are required separately.  Warning! Not suitable for children under 14 years.

EA-18G Growler Aircraft Model Kit 1:48 Scale
Easy Tyrann 280, RC helicopter, 2.4 GHz RTF

RC helicopters

Easy Tyrann 280, RC helicopter, 2.4 GHz RTF

500507173

€39.99

The Easy Tyrann 280 brings coaxial helicopter flying into a compact 280 x 200 x 125 mm format with a ready-to-fly setup, a 2.4 GHz control system and a top speed of 25 km/h. Its blue and black body, landing skids and illuminated nose give the model a clear presence as it lifts off for first hovering attempts in the living room or on a calm patio. Integrated gyro electronics support steadier flight characteristics, while the aluminium tail boom adds structure to the rear section during directional control. Left and right trim can be adjusted from the transmitter to correct the flight path in the air rather than interrupting a session. The switchable LED position indicators help keep orientation visible when the helicopter turns or moves further from the starting point. A 3.7 V 250 mAh LiPo flight battery powers runs of up to 8 minutes, and the included USB charger handles recharging between flights. The set also includes 3 x AAA transmitter batteries, so the model arrives with the key operating components in the box. This RC helicopter fits short practice sessions, from learning stable hovering indoors to controlled passes in light outdoor conditions. With 12 Years as the stated age marking and 1-player operation, the Easy Tyrann 280 suits focused solo flying where control inputs, trim changes and throttle feel can be learned step by step.

Easy Tyrann 280, RC helicopter, 2.4 GHz RTF
EdgeArt Brush Modeling Brush with PTFE Tip

Model tools

EdgeArt Brush Modeling Brush with PTFE Tip

500908252

€8.69

EdgeArt Brush brings 2 functions together in one modeling tool: a brush for paint work and a PTFE tip for decal handling. That combination supports controlled finishing on scale models, where small surfaces, narrow edges and clean placement call for more than a standard brush alone. The PTFE tip adds a dedicated contact point for moving, aligning or smoothing decals during application, while the brush side remains ready for detail painting and touch-ups. This makes the tool useful across separate finishing steps without changing between unrelated bench tools. The compact format suits careful work on markings, trim lines and other small visual details that shape the final look of a build. With batteries not included and no power requirement stated, the focus stays entirely on manual control and precise handling at the workbench. In a model-building session, the EdgeArt Brush can move from painted details to decal placement as the finish develops across the body or surface. For hobby benches where fine corrections, small graphics and neat edges matter, the combined brush and PTFE tip keep the process direct and exact.

New
EdgeArt Brush Modeling Brush with PTFE Tip
European Tractors TYRES and RIMS 1:24 kit

Trailers & accessories

European Tractors TYRES and RIMS 1:24 kit

510003909

€26.49

European Tractors TYRES and RIMS brings 1:24 scale wheel detail to truck model projects with a dedicated accessory kit built for European tractor units. The box contains 7 tyres and 7 rims, giving the build the specific wheel equipment needed to refine a tractor layout with front, rear, and spare wheel positions. The tyre and rim combination is designed as a detailed plastic kit, while the tyres themselves are shown as soft rubber parts for a more realistic finished appearance. The set uses 100% new moulds, supporting crisp rim structure and clearly defined wheel components during assembly. Front wheel equipment is supplied in size 385/65 R22.5, while the rear wheel equipment is supplied in size 315/80 R22.5, matching the different axle roles found on European tractor units. A decals sheet is included to apply sidewall markings and size graphics, adding another layer of scale-specific finish to the completed wheels. With an assembly time of 600 minutes, the kit suits builders who want to spend time on wheel detail rather than treating it as a background part of the model. It can be used to upgrade a tractor unit build, replace kit wheels, or add a more specific tyre setup to a 1:24 display project. Age marking: 14 Years.

European Tractors TYRES and RIMS 1:24 kit
EX-NEXT BASIC LDT, transmitter, 2.4 GHz

RC remote controls

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

505010784

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio system into a 4-channel transmitter built for fast, exact control on the track. High resolution signal processing and a redesigned electronic layout work together for a notably direct steering response, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. The set includes the KR-242XT receiver with long antenna for telemetry use. Its menu structure goes far beyond basic trim changes. Steering functions cover servo travel limit, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, auto-start, idle-up, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. A display, conversion calculator, VR information, sound settings and adjustable menu speed keep setup work clear at the bench between runs. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V, or a LiPo rechargeable battery 2S 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

New
EX-NEXT BASIC LDT, transmitter, 2.4 GHz
EX-NEXT BASIC LDT, transmitter, 2.4 GHz

RC remote controls

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

505010786

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 2.4 GHz transmitter built for fast, exact control. Its redesigned electronics deliver a highly direct steering feel and, in XT Advanced Mode, transmission speed up to 3 times faster than the EX RR. The included KR-242XT receiver with short antenna completes the core setup for telemetry use. A 4-channel PWM or serial layout gives the system a broad technical base for competition-focused RC driving. Steering functions include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim or balance and servo reverse. Throttle and brake adjustment extends further with 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way switching, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The transmitter measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving a substantial handheld format for longer sessions at the track. Timer functions include lap history, trigger start, lap navigation and alarm mode for structured race practice. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately. Age 14+  Warning! Not suitable for children under 14 years.

New
EX-NEXT BASIC LDT, transmitter, 2.4 GHz
EX-NEXT BASIC LDT, transmitter, 4-channel 2.4 GHz

RC remote controls

EX-NEXT BASIC LDT, transmitter, 4-channel 2.4 GHz

505010787

€439.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 4-channel transmitter built for fast, exact control. High resolution signal processing and the redesigned electronics work together for a notably direct steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. In the hand, the 240.5 x 163.0 x 107.2 mm format and 551 g weight create a substantial control unit for focused driving sessions. Its menu depth goes well beyond basic steering and throttle adjustment. Steering settings include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake functions add 3-stage forward and reverse speed, acceleration, push control, auto-start, idle-up, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way functions, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. Telemetry features cover RF mode, pairing, Real-Time ICS and battery failsafe, while timer functions include lap history, trigger start, alarm mode and lap navigation for track-focused running. The set comes with 2 KR-242XT receivers with short antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V or a LiPo rechargeable battery 2S 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

EX-NEXT BASIC LDT, transmitter, 4-channel 2.4 GHz
EX-NEXT BASIC RC transmitter, 4-channel 2.4 GHz

RC remote controls

EX-NEXT BASIC RC transmitter, 4-channel 2.4 GHz

505010778

€399.99

The EX-NEXT BASIC RC transmitter brings KO Propo control hardware into a focused 4-channel 2.4 GHz format built for fast, accurate driving. XT radio technology and newly developed electronics work together for highly precise response, with XT Advanced Mode reaching up to 3 times the transmission speed of the EX RR. The result is a notably smooth steering feel and direct control input that suits racing, competition and high-performance RC models. Its setup depth goes well beyond basic trim functions. Steering adjustment covers servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake tuning add 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, brake-in, hand brake and override. Timer functions include lap history, trigger start, lap navigation and alarm mode, while system tools add display settings, menu speed, battery information and a conversion calculator. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the unit a substantial hand-held format for track sessions and bench setup alike. The set includes 1 KR-242XT receiver with long antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery 6.6 V or a 2S LiPo rechargeable battery 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

EX-NEXT BASIC RC transmitter, 4-channel 2.4 GHz
EX-NEXT Basic, transmitter set, 4-channel 2.4 GHz

RC remote controls

EX-NEXT Basic, transmitter set, 4-channel 2.4 GHz

505010781

€439.99

Fast response and fine control define the EX-NEXT Basic transmitter set for ambitious RC driving. The 4-channel 2.4 GHz system uses the XT radio standard and combines the EX NEXT master unit with LCD, Xpansion Unit 2 EXP 201, Extension Unit 2.1 Basic and Grip Unit 2 Basic in one configured setup. The electronics platform supports XT Telemetry as the factory RF mode and reaches up to 3x the transmission speed of the EX RR in XT Advanced Mode. Real-Time ICS, pairing functions, battery failsafe and a wide system menu expand the setup range beyond basic driving adjustments. The transmitter measures 240.5 x 163.0 x 107.2 mm, weighs 551 g excluding batteries and has a power consumption of 200 mA. Timer functions include trigger start, lap history, lap navigation, alarm mode and start stop control, adding useful race-day data handling alongside the driving setup. Compatible receivers are listed as KR 420XT and KR 242XT, and this version comes with 2 KR-242XT short antenna receivers. Power is supplied separately via 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery at 6.6 V or a 2S LiPo rechargeable battery at 7.4 V. The broad menu structure suits competition sessions, multi-car pit setups and detailed tuning work on performance-focused RC models.  Warning! Not suitable for children under 14 years.

New
EX-NEXT Basic, transmitter set, 4-channel 2.4 GHz
EX-NEXT BASIC, transmitter, 4-channel 2.4 GHz

RC remote controls

EX-NEXT BASIC, transmitter, 4-channel 2.4 GHz

505010783

€419.99

The EX-NEXT BASIC transmitter brings KO Propo control technology into a focused 4-channel 2.4 GHz format built for precise RC driving. XT radio standard and high-resolution signal processing work together for very fast response and a notably smooth steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. On the bench or at the track, that combination supports direct inputs and clean corrections through technical sections. Its control architecture goes well beyond basic steering and throttle adjustment. Steering functions include servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, push control, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3-8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the transmitter a substantial hand feel for longer sessions. Model selection, model copy, model reset and 50 memory slots support fleets with different setups, while the timer menu adds start timer, trigger start, lap button and lap navigation for repeatable practice runs. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately.  Warning! Not suitable for children under 14 years.

EX-NEXT BASIC, transmitter, 4-channel 2.4 GHz
F-14A Tomcat 1:72 Aircraft Model Kit with Decals

Military aeroplane models

F-14A Tomcat 1:72 Aircraft Model Kit with Decals

510001414

€32.99

The Italeri F-14A Tomcat in 1:72 scale brings one of the defining U.S. Navy fighters of the 1970s through 1990s to the workbench as a detailed aircraft model kit. At 26.5 cm long, the finished jet has the long nose, twin-engine layout, twin-tail profile and tandem 2-seat cabin that made the Tomcat instantly recognizable in carrier operations and interceptor roles. This assembly kit is based on ESCI moulds and uses recessed line panels across the airframe, giving the surface a crisp engraved look that supports careful painting and weathering. The subject itself carries strong technical character: the full-size F-14A used variable-sweep wings and 2 afterburning turbofans, reached Mach 2.34 and served in air superiority duties after replacing the F-4 Phantom II. The included super decals sheet opens 4 finishing versions, with squadron markings, serials, national insignia and stencil data for different aircraft appearances. Assembly is required, with a stated build time of 600 minutes. On the bench, the 1:72 format suits focused cockpit painting, landing gear work and precise decal placement across wings, tails and fuselage panels. Once completed, the F-14A Tomcat fits naturally into naval aviation displays, Cold War aircraft collections or diorama scenes that call for a carrier-based fighter with a strong historical presence.

F-14A Tomcat 1:72 Aircraft Model Kit with Decals
F-15C Eagle Aircraft Model Kit 1:72 Scale

Military aeroplane models

F-15C Eagle Aircraft Model Kit 1:72 Scale

510001415

€22.99

The Italeri F-15C Eagle brings a modern air-superiority aircraft into 1:72 scale with a finished model length of 27.0 cm and the sharp profile that made the Eagle one of the defining fighter designs of its era. As a detailed assembly kit, it focuses on the distinctive twin-engine layout, broad wing planform and single-seat configuration that give the aircraft its unmistakable silhouette in flight and on display. This version draws on the later F-15C standard, the variant used by the U.S. Air Force, U.S. National Guard and several international air arms. The subject itself adds strong historical context, from its 1970s development for air-superiority missions to its combat use during the Gulf War in 1991. The aircraft's real-world specification also shapes the character of the build, with reference points such as the 20 mm M61 gun, a wide range of air-to-air missile options and 2 Pratt & Whitney F-100 after-burning turbofan engines capable of pushing the Eagle to Mach 2.5. A color instruction sheet supports the painting and marking process. On the bench, the kit suits builders who enjoy military aviation subjects with recognizable operational history and multiple finishing paths. The 4-version decal selection opens different marking choices, while the completed aircraft sits naturally in a collection of modern combat jets, Cold War aviation subjects or U.S. fighter types. Minimum age: 14 years

F-15C Eagle Aircraft Model Kit 1:72 Scale
Fiat 131 Abarth Rally OLIO FIAT Model Kit

Model car kit

Fiat 131 Abarth Rally OLIO FIAT Model Kit

510003667

€39.99

The Fiat 131 Abarth Rally OLIO FIAT model kit brings a landmark competition car into 1:24 scale with the wide-arched body, bonnet and side air intakes, and the bold rally livery that made this version instantly recognisable on gravel stages. Based on the 2-door Fiat 131 sedan and reworked by Abarth, the full-size car is reflected here as a detailed assembly project with a strong motorsport character. The subject itself carries rich rally history, with the Fiat 131 Abarth competing from 1976 and earning 3 World Rally Championship constructors' titles, a FIA Drivers' Cup and a drivers' championship. That background gives the finished build a clear place in competition history rather than a generic road-car look. The kit features rubber tyres for a more convincing wheel finish, a new decals sheet for the OLIO FIAT markings and race graphics, and black acetate splash guards that match the period rally setup. The body livery is tied to one of the iconic sponsor schemes associated with international competition in that era. During the build, the cockpit, exterior trim and competition markings come together into a display piece with the visual tension of a car caught mid-stage, dust trailing behind on a narrow rally road. Assembly is required and takes 600 minutes. Recommended age: 14 years and over.

Fiat 131 Abarth Rally OLIO FIAT Model Kit
Fiat 500 F Upgraded Edition Model Kit 1:12

Model car kit

Fiat 500 F Upgraded Edition Model Kit 1:12

510004715

€124.99

The Italeri 1:12 Fiat 500 F Upgraded Edition model kit recreates the most classic version of the Nuova 500, the compact Fiat that became a defining sight on Italian streets. Its rounded bodywork, compact proportions and folded-roof silhouette give the finished car a strong period look, while the 1:12 scale leaves room for visible trim, interior surfaces and body contours to read clearly once assembled. This assembly kit centres on the 500 F introduced in 1965, the version noted for front-hinged doors, a new frame and a wider windscreen. The upgraded moulds support cleaner shaping across the body shell and help bring out the small car's distinctive lines. Build options for the top allow an open or closed roof appearance, so the finished car can be set to match different display preferences. Screenprinted markings add model-specific finishing detail, and the classic Fiat 500 F layout gives the build a recognisable reference point for historic car collections. On a shelf, desk or in a display cabinet, the finished model carries the character of a compact city car that shaped post-war motoring culture. The opening panels invite a closer look at the build, while the steerable wheels and suspension add extra mechanical detail during handling and presentation. Assembly time is 600 minutes.  Warning! Not suitable for children under 14 years.

Fiat 500 F Upgraded Edition Model Kit 1:12
Fiat 500F 1968 Model Kit 1:12 with Opening Parts

Model car kit

Fiat 500F 1968 Model Kit 1:12 with Opening Parts

510004703

€129.99

The Fiat 500F 1968 model kit captures one of the most recognizable compact car shapes in 1:12 scale, building to a finished length of 25 cm. Its 100% new moulds support a sharply defined body shell, interior and exterior details, giving the classic Nuova 500 silhouette clear proportions on the bench and in a display cabinet. This assembly kit focuses on visible structure as much as outer shape. The build includes opening doors, a front bonnet and a rear bonnet, so the finished car can be shown with key panels raised rather than sealed shut. The roof can be completed in an opened or closed configuration, which changes the character of the model from a neat city-car profile to a folded-top version with more of the cabin on show. The kit also allows an Anglo-Saxon version with right-hand drive, adding a distinct interior layout option. Photoetched parts, chromed parts and rubber tires bring extra material contrast to trim, brightwork and running gear. Working suspension and steering wheels give the chassis a more technical finish, making the underbody and wheel areas as engaging as the exterior lines. During display, the model suits both closed-body presentation and open-panel setups that highlight the cabin, trim and mechanical detailing. Assembly is required, with an assembly time of 600 minutes.

Fiat 500F 1968 Model Kit 1:12 with Opening Parts
FIAT 806 Grand Prix Model Kit 1:12 Scale

Model car kit

FIAT 806 Grand Prix Model Kit 1:12 Scale

510004702

€169.99

The FIAT 806 Grand Prix model kit in 1:12 scale brings a landmark 1927 racing car into a large 30 cm format with the long proportions, exposed suspension layout and open cockpit that define early Grand Prix design. Built from upgraded Protar moulds, this assembly kit focuses on the engineering character that made the original FIAT 806 such a notable machine in motorsport history. The full-size car used a 180 HP 12-cylinder engine and was developed with major innovations in chassis, mechanics and bodywork. On the original vehicle, the engine and gearbox unit sat between the two chassis bars to optimize performance and drivability, and that unusual layout gives the model much of its technical interest during the build. More than 400 parts create a dense construction project with room for careful finishing across the body panels, cockpit and running gear. The bonnet opens on the completed model to expose the engine bay, while photo-etched parts and metallic accessories such as screws, nuts and springs bring extra definition to smaller areas. With 600 minutes assembly time, the kit suits a slower, workshop-style build where each stage can be handled with attention to fit and finish. Paints, tools and cement are required separately. Once completed, the working steering and soft rubber tires give the FIAT 806 Grand Prix a convincing period stance for shelf display, cabinet presentation or a motorsport-focused collection.

FIAT 806 Grand Prix Model Kit 1:12 Scale
Fiat CR 32 Freccia 1:72 Aircraft Model Kit

Military aeroplane models

Fiat CR 32 Freccia 1:72 Aircraft Model Kit

510001438

€17.49

The Italeri Fiat CR 32 Freccia in 1:72 scale turns one of the best-known interwar biplanes into a focused aircraft build with a strong historical profile. The assembly kit captures the compact fighter layout with stacked wings, fixed landing gear, an open cockpit and the distinctive proportions that made the CR 32 such a recognizable shape in aviation history. Designed in the early 1930s, the original aircraft used a 600 hp V-12 engine and reached 375 km/h, while its maneuverability made it a notable presence in air combat of the period. This kit draws on that background with markings for 5 versions, including aircraft from Regia Aeronautica, Aviazione Legionaria and the Hungarian Air Force. The decal sheet adds serials, insignia, crosses, tricolor panels and unit markings that support historically specific finishing rather than a single generic scheme. A display stand is also included, so the completed model can be presented in an in-flight angle once assembly and painting are complete. With assembly required and an indicated build time of 600 minutes, the model suits a slower bench session centered on fitting, painting and decal placement. The 14 Years+ marking matches the detailed format, making this a strong choice for builders drawn to classic military aviation, camouflage work and period squadron markings.

Fiat CR 32 Freccia 1:72 Aircraft Model Kit
Flashing Light Set, RC accessory, 2 orange beacons

Electronics

Flashing Light Set, RC accessory, 2 orange beacons

500907010

€82.99

Orange warning beacons are a familiar sight on construction machines, heavy-duty transporters and service vehicles, and this RC lighting set brings that visual cue into scale form with 2 compact flashing lights. Each beacon measures 14.5 mm in diameter and 25 mm in height with support, giving cabs, trailers and work-focused builds a clearly defined roof-mounted signal detail. The lighting effect comes from SMD flashing electronics that control 4 bulbs in sequence for a rotating beacon look rather than a static glow. The movable light can be mounted on a support with up to 5° slope, which helps when a cab roof or body panel is not completely level. The set is designed for broad use across construction site vehicles, heavy-duty vehicles, mockups and trailers. Connection-ready circuitry with shrinking tube is included, and the electronics module measures 37 x 30 x 5 mm for compact installation inside the model. Activation runs through a free switch cable on the receiver, so the beacons can be switched as part of the RC setup instead of being wired as a constant light. A Graupner-J/R connection cable is fitted for direct integration into compatible systems. The set suits scale builds that rely on functional lighting details to complete the look of working vehicles on the move or at a standstill.

Flashing Light Set, RC accessory, 2 orange beacons
Ford Escort Zakspeed Gr.2 D&W 1:24 Model Kit

Model car kit

Ford Escort Zakspeed Gr.2 D&W 1:24 Model Kit

510003664

€37.99

The Italeri Ford Escort Zakspeed Gr.2 D&W brings a late-1970s touring car icon into 1:24 scale with a build centered on the Escort Mk 2 shape, flared arches and race-prepared bodywork. The model kit draws on the dedicated Zakspeed version used between 1977 and 1978, giving the finished car the compact proportions and aggressive circuit look associated with that period. The assembly kit uses detailed moulded parts to form the body shell, interior, chassis area and exterior details. Visible components in the kit include cockpit parts such as seats, dashboard and steering wheel, along with front grille elements, structural bars and separate tyres for front and rear fitment. The decal sheet adds a strong period finish with D&W Zakspeed graphics, sponsor markings and race numbers 20 and 21. This creates room for careful paintwork and precise decal placement across the body, windows and trim areas. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the 1:24 scale format gives enough surface area for painting details such as the light blue body, dark trim and racing markings while keeping the model manageable in size. Once completed, the Ford Escort Zakspeed Gr.2 D&W sits naturally in a collection of classic motorsport subjects, and it also offers a satisfying project for builders who enjoy historic racing cars with distinctive team livery.

Ford Escort Zakspeed Gr.2 D&W 1:24 Model Kit
French Warriors Model Kit 1:72 Hundred Years War

Model figures

French Warriors Model Kit 1:72 Hundred Years War

510006026

€10.99

Italeri French Warriors brings the Hundred Years War into 1:72 scale with a historical figure assembly kit built around cavalry and infantry. The set contains 28 unpainted figures in total, made up of 20 soldiers, 8 knights and 8 horses, creating a strong base for medieval battle lines, mounted charges or courtly escort scenes. The unpainted finish keeps every shield, surcoat and horse covering ready for individual colour work, whether the aim is a restrained campaign palette or bold heraldic contrast. Mounted and foot figures allow different scene structures within the same set, so a display can shift from a compact knight formation to a wider battlefield arrangement. The 600-minute assembly time points to a substantial modelling project with room for careful preparation, painting and placement. As an assembly kit, it suits builders who enjoy shaping a historical scene figure by figure rather than placing a finished cast straight onto a base. On a shelf, in a diorama or across tabletop terrain, the 1:72 scale makes the group easy to combine with other period miniatures and scenery. Cavalry can be positioned at the front of a charge while soldiers fill out the background, giving medieval layouts more depth and a clearer sense of movement.

French Warriors Model Kit 1:72 Hundred Years War
FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz

Remote-controlled systems

FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz

500501022

€119.99

The FS 14K Reflex Stick Pro 4 brings a 14-channel layout, 2.4GHz transmission and a modern ergonomic RC housing into one control system shaped for complex model functions. Its carbon-look surface and illuminated logo give the transmitter a technical, workshop-ready appearance when powered on. The channel structure is designed for detailed function control. Four channels work continuously and fully proportionally for direct response through the control sticks, while channels 7, 8, 9, 10, 13 and 14 are assigned to 3-position toggle switches. Channels 5, 6, 11 and 12 operate through 3-position push buttons with centre position, creating a clear split between proportional inputs and switched functions. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply allows up to 11 V without BEC. A 15-channel receiver is listed in the included contents. For setup work, channels 1 to 4 feature servo reverse and trim, and channels 1 and 4 add dual rate for servo travel adjustment. This makes the system suitable for models that need tailored steering, throttle or auxiliary function behaviour. 100% compatibility is stated for TAMIYA MFC 01, MFC 02, MFC 03 and DMD units, which suits truck and function-model layouts with multiple switching tasks. 14 Years is stated as the recommended age.

FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz
FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz

Remote-controlled systems

FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz

500501023

€149.99

The FS 14K Reflex Stick Pro 4 LCD 2.4GHz brings broad channel control and fine setup options into one radio system built for demanding RC models. With 14 channels, an LCD layout and a 15-channel receiver in the set, it supports complex functions that go beyond basic steering and throttle, while the carbon-look finish and illuminated logo give the transmitter a distinctive technical appearance. Channels 7, 8, 9, 10, 13 and 14 use 3-position toggle switches, while channels 5, 6, 11 and 12 use 3-position push buttons with centre position. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply can reach up to 11 V without BEC. A Graupner J/R connector system is used for integration, and the radio is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as DMD units. The set includes the 14-channel LCD remote control, a 15-channel receiver and a manual. For truck, construction and function models with multiple switching tasks, the channel layout supports lighting, sound and auxiliary functions from one handset. The 14 Years marking fits advanced RC use, where stored model setups and detailed channel assignment matter during regular driving and system changes.

FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz
FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

500501020

€99.99

The FS 6K Reflex Stick Pro 4 2.4GHz brings 6-channel radio control into a layout built for detailed model setups and precise handling. Four continuously adjustable, fully proportional channels work alongside a 3-position push button on channel 5 and a 3-position toggle switch on channel 6, giving a clear control structure for driving functions and switched features. The integrated failsafe system adds an important control function for model operation. Trim for channels 1-4 supports exact correction directly at the transmitter, while dual rate for channels 1-2 adjusts servo travel for a more tailored response. The control sticks use precise, smooth mechanics, and the housing combines an ergonomic shape with a carbon-look surface and an illuminated logo when powered on. The transmitter operates at 4.8-6 V with 4 AA cells, the receiver power supply reaches up to 11 V without BEC, and the connector system uses Graupner J/R. Compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units expands the range of suitable model applications. On the bench, the channel layout supports careful setup of steering, throttle and auxiliary functions before a model heads out. During driving sessions, the separate switching options and proportional control help keep inputs clean and deliberate across different model configurations.

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz
FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

500501021

€109.99

The FS 6K Reflex Stick Pro brings 2.4GHz radio control, a 6-channel layout and an LCD interface into one focused setup for model driving with a clear, technical feel in hand. Smooth control sticks, an ergonomic housing and a carbon-look surface shape a transmitter that suits longer sessions at the workbench and on the track alike. Channels 1 to 4 are continuously adjustable and fully proportional, while channel 6 is assigned to a 3-position toggle switch and channel 5 to a 3-position push button with centre position. The transmitter stores 15 model memories, making it easier to keep separate configurations ready for different vehicles. For channels 1 to 4, servo reverse changes direction of movement, trim corrects neutral position, dual rate adjusts servo travel, EPA limits servo travel and EXP changes response characteristics around centre input. The receiver power supply can reach up to 11 V without BEC, and the system is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as the DMD unit. A 6-channel receiver and manual are included. 4 AA cells are required separately for the 4.8 to 6 V transmitter operating voltage. With a minimum age marking of 14 years, this radio set fits hobby-focused RC setups where multiple channel functions, stored profiles and detailed response adjustment matter during driving and setup.

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz
Fulda Variotonn Off-Road Tires, 1:14 accessory

Tyres & rims

Fulda Variotonn Off-Road Tires, 1:14 accessory

500907612

€26.99

The Fulda Variotonn off-road tires bring a scale-focused wheel upgrade to 1:14 model vehicles with a tread pattern shaped for rough ground and a look that suits truck and off-road builds. Supplied as a set of 2, they add a defined off-road profile with large outer tread blocks and a zigzag centre section that stands out clearly on the vehicle. Their flexible pneumatic construction is the key working feature here. As the tire deforms against the surface, it can maintain more usable contact on dirt tracks, gravel sections and uneven terrain, which supports traction during acceleration and directional changes. Compatibility with original Tamiya rims makes the set useful for replacing worn tires or adapting an existing wheel setup without changing the rim system. The 1:14 scale keeps the fit aligned with model layouts in this size class. On workshop benches, during maintenance sessions or as part of a fresh build, these tires add a functional off-road option where tread choice matters. The black finish and molded sidewall detailing also suit display models that benefit from a more rugged wheel appearance alongside practical running use.

Fulda Variotonn Off-Road Tires, 1:14 accessory
Gauls Warriors 1st Century Model Figures 1:72

Model figures

Gauls Warriors 1st Century Model Figures 1:72

510006022

€10.99

Gauls Warriors 1st Century brings 1:72 scale historical modelling into a broad army set with 40 unpainted figures and 98 parts to assemble. The mix of warrior poses, separate shields and period equipment gives battle scenes a dense, active look, whether the figures stand in a charging line, guard a woodland pass or build out a larger ancient campaign display. The set draws on Gallic tribes from the areas of modern France, Switzerland, Belgium and Holland, placing the figures in the period of Caesar's campaigns and the leadership of Vercingetorix. Longswords and decorated shields define the visual identity of the warriors, while the varied stances help break up repetition across the group. The unpainted finish leaves room for custom colour work on clothing, shields and weapons, and the reference artwork shows patterned trousers, shield motifs and contrasting tones that can shape a more individual force. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a cabinet or across a terrain board, the figures can form a tribal war band, oppose Roman units or extend an existing ancient collection with more infantry depth. The 1:72 format also works well for builders who want to stage the Battle of Alesia or create original scenes with clustered shields, advancing spears and scattered command figures.

Gauls Warriors 1st Century Model Figures 1:72
Gearboxmotor Support Legs, trailer spare part

Electronics

Gearboxmotor Support Legs, trailer spare part

500907199

€37.49

This geared motor is the dedicated drive component for Carson trailer support legs and is specified in the product data as the required accessory for 500907218 electrical support legs. Its compact format combines a cylindrical motor body, a gearbox section and an output shaft for installation in the matching trailer mechanism. The gearbox layout is designed to transmit the motor's rotation through the support leg drive, while the attached red and black wires provide the electrical connection points for integration into the intended setup. The product data identifies this version as 1 piece, making it suitable as a replacement part or as one unit toward a complete support leg drive arrangement. The same data also states that 2 pieces are required for the full electrical support leg configuration on compatible Carson trailers. Within a workshop, service bench or model trailer rebuild, this component fits the kind of task where a worn or missing drive unit needs to be exchanged with the correct matching motor. The stated age marking is 14 Years. As a model-building accessory, it focuses on the functional side of trailer equipment by supplying the motorised basis for the electrical support leg system.

Gearboxmotor Support Legs, trailer spare part
German Guns Set Model Kit 1:72 with 8 Figures

Model tanks

German Guns Set Model Kit 1:72 with 8 Figures

510007026

€12.99

The German Guns Set brings 3 artillery subjects together in 1:72 scale, combining PAK35, PAK40 and FLAK38 builds with 8 figures for a compact military scene that develops step by step on the workbench. Each gun adds a different silhouette to the finished layout, so the set can be arranged as a focused display with crews placed in firing, loading or support positions. As an assembly kit, this set suits builders who enjoy a longer project, with a stated assembly time of 600 minutes. The 1:72 format keeps the proportions tight and manageable while still leaving room for distinct gun shields, carriages, barrels and crew placement across the 3 models. The included figures help break up the composition around each emplacement and give the finished scene more depth than a guns-only build. Paints and cement are required separately. On a shelf, in a cabinet or as part of a wider World War II diorama, the completed set creates a layered arrangement with multiple focal points rather than a single vehicle or weapon. The shared 1:72 scale also makes it easier to combine the finished guns and figures with other military builds in the same collection.

German Guns Set Model Kit 1:72 with 8 Figures
German Infantry Winter Uniform Figure Set 1:72

Military figures & accessories

German Infantry Winter Uniform Figure Set 1:72

510006151

€12.49

The Italeri German Infantry Winter Uniform Figure Set 1:72 brings World War II winter troops into compact scale with 36 unpainted figures shaped from 100% new moulds. Across a snowy diorama, trench section or battlefield display, the varied stances create the look of movement, cover and coordinated advance rather than a repeated row of matching soldiers. Each figure starts as an assembly kit, leaving room for careful preparation, painting and finishing work across helmets, coats, equipment and weapons. The 1:72 scale makes the set easy to combine with vehicles, artillery pieces and terrain built to the same proportion, so the figures can anchor a wider historical scene. Because the parts are unpainted, camouflage tones, shading and weathering can be matched to a chosen theatre or season. The new mould tooling also supports sharper separation between uniform layers and field gear, which helps brushwork stand out once painted. With a stated assembly time of 600 minutes, this set suits builders who want a longer project rather than a quick tabletop addition. The mix of standing, kneeling and prone positions gives flexibility when arranging snowbound defences, advancing infantry groups or support weapon placements, whether the figures are used as the centre of a display or to complete a larger World War II layout.

German Infantry Winter Uniform Figure Set 1:72
GlueBrush 13 mm Tip Refill Pack, model accessory

Model tools

GlueBrush 13 mm Tip Refill Pack, model accessory

500908256

€4.89

Precise adhesive work often depends on the right contact width, and this GlueBrush refill pack adds 18 replacement tips in a 13 mm format for repeated use at the workbench. The wider tip size suits glue application across broader bonding areas, where an even spread helps keep joins neat during model-building and repair tasks. As a dedicated refill for the GlueBrush system, the pack supports ongoing workshop use without changing the established handling of the applicator itself. The 13 mm format gives a clear, practical option when adhesive needs to cover more surface than a narrow tip allows. That makes the set useful for assembly stages, material joins and touch-up work where consistent glue placement matters. With 18 replacement tips in one pack, fresh working heads are available for multiple sessions instead of relying on a worn applicator end. On a model-building bench, the refill pack fits naturally into regular adhesive routines, whether one stage calls for a clean new tip or separate materials are being handled in sequence. The format also works well as workshop stock for hobby projects that return to glue work again and again.

New
GlueBrush 13 mm Tip Refill Pack, model accessory
GlueBrush 3 mm Tip, refill pack, model supply

Model tools

GlueBrush 3 mm Tip, refill pack, model supply

500908255

€4.89

GlueBrush 3 mm Tip (18) Refill Pack brings a straightforward supply of fresh applicator tips to the workbench for precise adhesive handling in model-building tasks. With 18 replacement tips in a 3 mm format, the set supports repeated glue application on smaller contact points, narrow edges and detail-led assembly steps. The 3 mm tip size helps keep the glue line defined when working on compact joins that need more control than a broader applicator can offer. As a refill pack, this set is built around maintaining the GlueBrush setup already in use, making it a practical addition for ongoing builds, touch-up work and repair jobs. The pack format suits hobby benches where consumables need to stay ready between projects, and the quantity of 18 tips provides a useful reserve for regular adhesive work. The age marking is 14 years and up. On a model-building table, these replacement tips fit naturally into assembly sessions that move between test fitting, bonding and detail placement. They also support careful adhesive application during maintenance work, when a fresh tip can help keep handling neat around smaller parts and tight spaces.

New
GlueBrush 3 mm Tip, refill pack, model supply
GlueBrush-Set with 3mm Nano Tips, model tool

Model tools

GlueBrush-Set with 3mm Nano Tips, model tool

500908253

€13.39

Precise adhesive placement can make the difference between a clean assembly and visible excess on a finished model. The GlueBrush-Set with 3 mm Nano Tips is built for controlled glue work on small contact areas, bringing a finer application point to detailed model-building tasks. The set format combines a GlueBrush applicator concept with 3 mm Nano Tips, giving model builders a concrete tool for directing adhesive onto narrow joins and small parts. That focused application helps when working around edges, seams and compact assemblies where broad glue spread can interfere with the finish. In repair work, touch-up steps or fresh builds, the smaller tip size supports a tidier workflow on parts that need accuracy rather than volume. The 3 mm tip dimension is the key working detail here, because it suits jobs where placement matters more than coverage. On the workbench, this set fits careful assembly sessions with scale models and hobby projects that call for neat glue control on fine components. The age marking 14 Years is stated in the product data.

GlueBrush-Set with 3mm Nano Tips, model tool
GlueBrush-Set, model supplies, 13 mm nano tips

Model tools

GlueBrush-Set, model supplies, 13 mm nano tips

500908254

€13.39

The GlueBrush-Set with 13 mm nano tips is built for adhesive work that calls for a finer touch on model-building projects. Its compact tip format helps place glue on small contact areas, narrow seams and delicate parts where broad applicators can leave excess material behind. Within model supplies, this set supports controlled handling during assembly, touch-up and repair work on miniature components. The 13 mm tip length gives access to confined spots around edges and joins, making it easier to guide adhesive exactly where the bond is needed. That focused application can help keep surrounding detail cleaner on small-scale builds and reduce smearing across adjacent surfaces. Because the set is centred on precision rather than volume, it fits tasks that involve careful placement on trim, fittings and other fine sections. On the hobby bench, the GlueBrush-Set works well alongside regular building tools when a project reaches the stage for neat adhesive application. It also suits maintenance sessions where a small part, seam or detail piece needs accurate glue placement without flooding the area.

GlueBrush-Set, model supplies, 13 mm nano tips
GMC 2 1/2Ton.Truck D-Day 80th Ann. 1:35 Kit

Model tanks

GMC 2 1/2Ton.Truck D-Day 80th Ann. 1:35 Kit

510006271

€25.99

The Italeri GMC 2 1/2Ton.Truck D-Day 80th Ann. brings a key World War II transport vehicle into 1:35 scale, centering the build on the truck that formed a major part of U.S. Army logistics after the Normandy landings. The subject combines the familiar cargo configuration with the visual presence of a 6x6 military truck, giving the finished model a strong convoy and field-service character. This detailed assembly kit draws on a vehicle known for its robust structure, reliable service and effective suspension design. The six-wheel-drive layout is part of what made the original truck so useful on rough ground, and that mechanical identity carries through in the model's stance and proportions. The GMC 2 1/2 ton truck appeared in numerous variations, including cargo versions with open or closed cabins as well as long and short wheelbase forms, and this edition focuses on the wartime transport role tied to the D-Day 80th anniversary theme. Assembly is required. Paints, cement and tools are required separately. On the bench, the military markings and olive drab finish open up a classic WWII painting approach, while the completed truck fits naturally into Normandy-themed displays, supply column scenes or broader U.S. Army collections. The 1:35 scale also pairs well with other military vehicle builds from the same era, whether the model is placed as a standalone transport truck or as part of a larger historical diorama.  Warning! Not suitable for children under 14 years.

GMC 2 1/2Ton.Truck D-Day 80th Ann. 1:35 Kit
Hartenstein Hotel Battle Set Model Kit 1:72

Military figures & accessories

Hartenstein Hotel Battle Set Model Kit 1:72

510006107

€79.99

Hartenstein Hotel is a 1:72 Battle Set from Italeri that recreates a September 1944 Operation Market Garden scene around one of the best-known Arnhem locations. The centrepiece is the Hartenstein Hotel, built from MDF laser-cut parts that form the multi-storey structure with window sections, facade details and architectural panels for a substantial battlefield backdrop. Around the hotel, the set combines 100 figures in total, with 50 British Paratroopers and 50 German Infantry for opposing forces across streets, entrances and defensive positions. A Willys Jeep and a Sturmgeschutz III are included as fast assembly models, adding 2 vehicle types that can anchor patrol, support or assault scenes. Extra battlefield buildings and accessories broaden the layout with a checkpoint, sandbag station, infirmary and watchtower, so the scene can be arranged with clear routes, cover points and elevated positions. Assembly is required, and the stated build time is 600 minutes. Once assembled, the set supports broad diorama layouts with the hotel as the focal structure and the smaller scenery elements spread around it to shape a perimeter or street approach. The 1:72 scale also makes the scene suitable for display shelves, historical tabletop setups or a dedicated WWII arrangement where figures, vehicles and buildings work together in one coherent setting.  Warning! Not suitable for children under 14 years.

Hartenstein Hotel Battle Set Model Kit 1:72
Heinkel HE-111H-6 Aircraft Model Kit 1:72

Military aeroplane models

Heinkel HE-111H-6 Aircraft Model Kit 1:72

510001436

€34.99

The Italeri Heinkel HE-111H-6 brings a well-known twin-engine bomber into 1:72 scale with a detailed plastic kit that highlights the aircraft's fully glazed nose, broad wing planform and unmistakable tail profile. At 22.7 cm long, the finished model has a balanced display size that shows the shape clearly without demanding a large footprint. This assembly kit is built around a historical aircraft subject that formed a major part of Luftwaffe bomber operations in the early years of the Second World War. The original Heinkel He-111 used 2 Jumo 211 engines and reached a maximum speed of 440 km/h, while its internal loading bay could carry up to 2,000 kg of bombs. Those background details give the build context when working through the airframe, glazing, engines and external stores. Super decals for 5 versions expand the finishing possibilities, and the color instruction sheet supports accurate placement of markings and camouflage across different schemes. The 600-minute assembly time suits model builders who enjoy a more involved aircraft project with painting and decal work as part of the process. On the bench, the 1:72 format keeps handling practical during construction, and once completed the Heinkel HE-111H-6 sits naturally alongside other military aircraft in the same scale for display or collection. Age 14+

Heinkel HE-111H-6 Aircraft Model Kit 1:72
HEMTT Gun Truck Model Kit 1:35 with Decals

Model tanks

HEMTT Gun Truck Model Kit 1:35 with Decals

510106510

€41.99

The Italeri 1:35 HEMTT Gun Truck model kit brings the heavy military transport platform into a build focused on armour, scale presence and field conversion detail. With a finished length of 28.0 cm, the truck's long 8-wheel layout gives the completed subject a commanding footprint that suits both shelf display and convoy diorama scenes. The HEMTT name stands for Heavy Expanded Mobility Tactical Truck, a vehicle range introduced for the United States Army from the mid-1980s. This version reflects the gun truck conversions developed for escort and convoy protection duties, with added defensive structures around the cab and rear section. The kit is described with fully upgraded moulds, supporting cleaner definition across the body panels and helping painted details stand out once the build is complete. Decals for 1 version add operational markings that reinforce the technical, service-used appearance of the truck. The assembly kit is recommended for ages 14+ and has a stated assembly time of 600 minutes. Figures are not included. On the workbench, the combination of large structural sections and smaller finishing details creates a measured, step-by-step build. Once completed, the HEMTT Gun Truck fits naturally into modern military collections, desert vehicle displays and scenes built around transport, escort or protected movement roles.

HEMTT Gun Truck Model Kit 1:35 with Decals
Hercules C-130J C5 Aircraft Model Kit 1:48

Military aeroplane models

Hercules C-130J C5 Aircraft Model Kit 1:48

510002746

€79.99

The Hercules C-130J C5 from Italeri brings the familiar shape of the Hercules into a 1:48 aircraft model kit with the updated features of the later transport aircraft. At 62.1 cm long when completed, the finished build gives the high wing, tall fin and broad fuselage the visual weight that suits a large military airlifter on the bench or on display. This assembly kit focuses on the reworked C-130J configuration rather than an earlier Hercules version. The airframe is defined by 4 Rolls-Royce Allison AE2100D3 engines, each rated at 4700 HP, paired with 6-blade composite-material propellers. The cockpit reflects the avionics update with digital instruments and a Head-Up Display, so the model captures both the external and internal changes that marked the C-130J generation. A super decals sheet is supplied for 4 versions, supporting different finishing options with service markings, serials and stencil data. The subject represents the transport aircraft that has become standard in many NATO countries, including Italy. Long building sessions, painting work and decal placement make this kit suited to model makers who enjoy large aircraft subjects with visible structural presence. Paints, cement and tools are required separately.

Hercules C-130J C5 Aircraft Model Kit 1:48
IronPoint Brush 1.0 mm Ball, model paintbrush

Model tools

IronPoint Brush 1.0 mm Ball, model paintbrush

500908240

€8.49

The IronPoint Brush 1.0 mm Ball brings a fine-format painting tool to model work where small areas and controlled handling matter. Its 1.0 mm ball tip gives hobby benches a focused option for placing paint on compact sections, edge lines and detail zones that benefit from a smaller contact point. Within model finishing setups, a brush like this supports careful colour work without shifting into broad coverage. The ball tip format suits measured application on parts that need accuracy rather than speed, making it useful for touch-ups, narrow accents and small painted elements. The slim working size also fits projects where different brush widths are used across separate stages, with the 1.0 mm format covering the finer end of that workflow. As a model supplies tool, it belongs alongside paints and other finishing essentials used to refine surface details. On the workbench, the brush suits detail passes on scale components, figures or decorative sections where clean placement counts. It also fits follow-up painting after assembly, when smaller areas need careful finishing or colour correction.

IronPoint Brush 1.0 mm Ball, model paintbrush
IronPoint Brush 1.4 mm Ball, model brush

Model tools

IronPoint Brush 1.4 mm Ball, model brush

500908241

€8.89

The IronPoint Brush 1.4 mm Ball brings a fine, controlled tool into model finishing, with a ball-shaped 1.4 mm tip that suits careful paint placement on small sections and detailed surfaces. In a hobby workspace, it fits naturally beside paints and parts where neat edges and measured brush movement matter. Its single-brush format keeps the choice straightforward when a specific tip size is needed for touch-ups, accents or compact painted areas. The ball tip shape supports close work around contours, raised details and narrow sections that benefit from a smaller contact point. For model-building enthusiasts, that makes it useful during colour application on figures, accessories or body details where broad coverage would be less precise. The product data states an assembly time unit, voltage unit and operating time unit at database level, but no usable values are provided for this brush, so the copy stays focused on the confirmed brush specification. On the bench, the IronPoint Brush can move from small correction work to deliberate detailing passes without changing to a larger format. The stated age marking is 14 Years, and the 1-brush pack suits replacing a worn detailing tool or expanding an established painting kit with a dedicated fine-tip option.

IronPoint Brush 1.4 mm Ball, model brush
IronPoint Brush 2.0 mm Ball Hobby Tool

Model tools

IronPoint Brush 2.0 mm Ball Hobby Tool

500908242

€8.99

IronPoint Brush 2.0 mm Ball is a precisely designated hobby tool from the Carson Modelsport range, defined in the data by its 2.0 mm ball format and single-piece pack count. That clear specification gives model-building enthusiasts a concrete reference when selecting tools for bench work that calls for a named tip size and shape. The available data is intentionally compact, so the description stays close to the verified facts. Both the ShortDescription and ShortDescriptionMM fields identify the same IronPoint Brush 2.0 mm Ball designation, which supports consistent catalogue recognition and straightforward matching when replacing an existing brush or adding a specific format to a workshop setup. The age marking is 14 Years, stated exactly as provided. The pack count is 1, making this a single brush rather than a multi-piece set. Within a model-building workspace, a clearly labelled 2.0 mm ball brush suits organised tool selection, whether the aim is maintaining a dedicated bench assortment or keeping a known format ready for repeat tasks. The concise specification makes this version easy to identify in storage, workshop drawers or project planning where exact naming matters.

IronPoint Brush 2.0 mm Ball Hobby Tool
IronPoint Needle 0.5 mm, model tool tip

Model tools

IronPoint Needle 0.5 mm, model tool tip

500908243

€10.99

IronPoint Needle 0.5 mm Pointed is a fine model-making tool component with a clearly defined pointed tip for controlled work on small-scale tasks. The 0.5 mm size gives this needle a narrow working profile that suits precise contact in tight areas, whether the focus is detailing, touch-up work or other careful workshop steps. As a single needle version, it fits situations where a specific tip size is needed rather than a mixed set. The pointed shape supports exact placement on edges, corners and small sections that benefit from a slim tool profile. In a hobby workspace, a dedicated 0.5 mm needle can help keep processes consistent when the same fine format is required across repeated tasks. The stated minimum age is 14 years. On the bench, this kind of narrowly sized needle suits focused sessions where small parts and compact surfaces call for measured handling. It also works well as a spare kept alongside model supplies, ready when a matching pointed 0.5 mm needle is needed for continued project work.

New
IronPoint Needle 0.5 mm, model tool tip
Carson IT Plastic Modelling Beginner Tool-Set by Italeri

Model tools

IT Plastic Modelling Beginner Tool-Set by Italeri

510050830

€13.99

The IT Plastic Modelling Beginner Tool-Set from Italeri gathers 4 essential workshop tools into one focused starter set for plastic kit building. A brush, cutter, file and angled tweezer support the key hands-on steps that shape a cleaner build, from separating parts and refining edges to placing small components and handling detail work at the bench. The metal tweezer is suited to controlled pickup and placement where fingertips can block access to narrow contact points. The cutter helps remove parts during preparation, while the file works on edge cleanup and small surface corrections before joining sections. The brush adds a finer tool for detail painting and careful application on smaller areas. Together, these tools cover several of the routine actions that appear again and again during model assembly, making the set a practical entry point for builders who are starting with plastic kits. Assembly is required, with a stated assembly time of 600 minutes. The set fits naturally into work on scale models, miniatures and other detailed assembly projects where trimming, smoothing, positioning and fine brushwork all play a part in the finished result.

IT Plastic Modelling Beginner Tool-Set by Italeri
Carson Italeri 00 Brush Synthetic Flat Single Pack

Model brushes

Italeri 00 Brush Synthetic Flat Single Pack

510052222

€1.59

The Italeri 00 Brush Synthetic Flat Single Pack brings a narrow flat tip into detailed painting work, with short synthetic bristles that help place colour cleanly on small sections, edges and fine surface areas. The slim brush head and metal ferrule create a precise working end that suits careful coverage where a larger brush would be less exact. Its flat profile is useful for controlled strokes across raised details, trim lines and compact panels, while the short bristle length supports a steady response during close work. The dark blue handle gives the brush a clear, classic workshop look, and the orange bristles make the tip easy to read while loading paint and guiding each stroke. As listed in the product data, assembly is required and the stated assembly time is 600 minutes. The included component is an assembly kit. The age marking is 14 Years. This brush fits naturally into model benches, miniature painting sessions and other craft setups where a defined flat edge is needed for neat colour placement. It also works well as a dedicated shape for touch-up tasks, detail coats and other small-scale finishing steps within a longer painting routine.

Italeri 00 Brush Synthetic Flat Single Pack
Carson Italeri 000 Synthetic Flat Brush Single Pack

Model brushes

Italeri 000 Synthetic Flat Brush Single Pack

510052221

€1.49

The Italeri 000 Synthetic Flat Brush Single Pack brings a precise flat tip to model painting, with synthetic bristles shaped for controlled colour application on small sections and fine edges. Its compact brush head suits assembly kit work where narrow parts, raised details and tight corners need a cleaner stroke than a larger brush can deliver. The flat 000 format supports short, deliberate passes rather than broad coverage, making it useful for touch-ups, edge definition and careful blocking of small painted areas. A metal ferrule secures the bristles to the handle and gives the brush a familiar hobby-tool structure for steady handling during close work. The single-pack format adds one specific brush shape to an existing painting setup without duplicating larger sizes or mixed assortments. Assembly is required for the related kit context, with an assembly time of 600 minutes stated in the product data. On model benches, this brush fits moments where a narrow flat edge helps guide paint along panel lines, trim sections or compact surface details. It also suits finishing stages that call for measured coverage on small parts, where a fine synthetic tip can place paint with more control than a wider flat brush.

Italeri 000 Synthetic Flat Brush Single Pack
Carson Italeri 1 Brush Synthetic Round Single Pack

Model brushes

Italeri 1 Brush Synthetic Round Single Pack

510052204

€1.79

Italeri 1 Brush Synthetic Round Single Pack brings a focused tool shape to detailed hobby painting, with synthetic bristles gathered into a fine round point for controlled work on narrow lines, edges and small painted sections. The dark blue handle, silver metal ferrule and orange tip give the brush a clear workshop look while keeping attention on the slim profile that suits close, careful application. The pointed head shown in the product data supports paint placement where broader brush shapes would spread colour too widely across a surface. The ferrule secures the bristle bundle at the transition from handle to tip, helping the brush keep its narrow working shape during detail work. As a single-pack brush, it fits naturally into an existing modelling or craft setup when one precise round profile is needed rather than a larger mixed set. Assembly is required, and the product data states an assembly time of 600 minutes. On model benches, craft tables and painting stations, this brush suits sessions that call for measured strokes on small parts and defined painted accents. The 14 Years age marking is stated in the product data for this assembly kit.

Italeri 1 Brush Synthetic Round Single Pack
Italeri 15cm Panzerwerfer 42 auf SWS Kit

Model tanks

Italeri 15cm Panzerwerfer 42 auf SWS Kit

510006562

€31.99

Italeri 15cm Panzerwerfer 42 auf SWS Kit brings a World War II half-track rocket launcher into 1:35 scale with a detailed plastic assembly project and a finished model length of 198 mm. The combination of the Schwerer Wehrmachtschlepper chassis and the elevated 15 cm launcher gives the build a strong mechanical profile, from the front wheel and armored cab to the rear track units and launch platform. The original vehicle was developed from the SWS as a medium half-track used for supply transport and light artillery towing, then adapted for other battlefield roles on its rear load area. In this version, the rear section carries a 10 barreled 15 cm Nebelwerfer 42 mounted above an armored ammunition storage compartment, which sets this subject apart from standard transport variants. The plastic kit format gives close attention to the contrast between the sloped armor, the open running gear layout and the compact launcher assembly. A new decal sheet adds technical markings, crosses, registration numbers and version-specific details for 2 finishing options. Across the workbench, the 600 minute assembly time supports a more involved build with room for careful painting, marking placement and subassembly work. Once completed, the 198 mm model fits naturally into a 1:35 military collection, whether placed alongside other half-tracks, artillery subjects or late-war armored vehicles.

Italeri 15cm Panzerwerfer 42 auf SWS Kit
Italeri 1:12 F-104G Cockpit Model Kit

Military aeroplane models

Italeri 1:12 F-104G Cockpit Model Kit

510002991

€34.99

Italeri 1:12 F-104G Cockpit Model Kit brings the Starfighter's crew station into close focus with a build centered on the aircraft's distinctive instrument layout and seat arrangement. At 1:12 scale, the cockpit section reaches 14.7 cm in length and 9.0 cm in width, giving the finished assembly enough presence for the analog panels, side consoles and structural forms to read clearly. The kit contains 124 parts and is designed as an assembly project for ages 14 years and up. The subject draws on the Lockheed F-104 Starfighter, an interceptor known for its slender fuselage, compact wing area and service life that stretched from the late 1950s into the mid-2000s with some air forces. Inside the cockpit, the period character comes through in the detailed controls, the instrument panel layout typical of 1950s and 1960s fighters, and the accurately reproduced Martin Baker Mk.I Q ejection seat. Decals supply the cockpit dials, while adhesive acetate silk seat belts and clear parts for the visor, gunsight and radar scope add further finishing detail. Assembly time is listed at 600 minutes, making this a substantial bench project built around painting, fitting and detailing rather than a quick weekend build. The completed cockpit section suits display on a shelf, in a cabinet or alongside other aviation subjects, where the concentrated interior detail can be viewed from multiple angles.

Italeri 1:12 F-104G Cockpit Model Kit
Italeri 1:24 Container Auflieger 40Ft Kit

Model trucks

Italeri 1:24 Container Auflieger 40Ft Kit

510003951

€58.99

Italeri 1:24 Container Auflieger 40Ft is a detailed plastic kit that brings a standard freight trailer into scale form with a 50.5 cm finished length and the long proportions of a 40 ft container setup. The subject draws on the container format used across ships, trains and trucks, so the completed build carries the look of real intermodal transport into a shelf display or diorama scene. The assembly kit focuses on the structure and finish of a commercial trailer rather than a racing or military vehicle. Molded parts form the chassis, underframe and running gear, while the container body adds the tall corrugated profile seen in modern freight handling. The decal sheet goes beyond large side logos by adding technical capacity markings, caution labels, speed signs and multiple registration details that sharpen the industrial character of the model. A color instructions sheet guides the painting stage, and the stated assembly time of 600 minutes makes this a substantial bench project with room for careful fitting, painting and decal placement. Placed beside a warehouse backdrop, loading bay or road transport scene, the finished trailer suits modern logistics layouts with a clear commercial theme. It also works as a companion build for 1:24 truck subjects, where the container trailer adds scale length and freight context to a complete transport combination.  Warning! Not suitable for children under 14 years.

Italeri 1:24 Container Auflieger 40Ft Kit
Italeri 1:24 US Wrecker Truck Model Kit

Model trucks

Italeri 1:24 US Wrecker Truck Model Kit

510003825

€69.99

Italeri 1:24 US Wrecker Truck is a scale model kit that brings a classic American heavy recovery vehicle into a detailed build format. At 34.5 cm long in finished form, the model has the size to show the proportions of the cab, the multi-axle rear section and the prominent recovery structure in a clear, workshop-style silhouette. The subject draws on the truck types used on US roads to handle breakdowns and transport damaged vehicles when roadside repairs are not enough. Numerous side compartments are represented as part of the body design, echoing the storage areas used for tools and repair materials on full-size wreckers. The rear section is shaped around heavy-duty towing equipment, giving the model its defining working character. The kit format also leaves room for painting and finishing work, with separate colours and weathering materials recommended in the source data for builders who want to develop surface detail further. With a recommended age of 14 Years and a stated assembly time of 600 minutes, this build suits a slower bench session with attention on fit, paintwork and final presentation. On a shelf, in a garage-themed diorama or alongside other 1:24 commercial vehicle subjects, the completed wrecker carries the visual weight of a dedicated recovery truck rather than a standard road hauler.

Italeri 1:24 US Wrecker Truck Model Kit
Italeri 1:24 Volvo FH4 Globetrotter XL Kit

Model trucks

Italeri 1:24 Volvo FH4 Globetrotter XL Kit

510003940

€74.99

The Italeri 1:24 Volvo FH4 Globetrotter XL kit brings a modern long-haul tractor unit into scale form with 100% new moulds, a 24.6 cm finished length and the tall Globetrotter XL cab that defines the full-size truck's road presence. The plastic kit captures the FH4's aerodynamic shape while giving the build a strong visual focus through the high-roof cabin, the chassis layout and the distinctive Volvo front end. Beyond the outer bodywork, the kit develops its detail through several separate areas of the truck. The driver door can be built open or closed, which changes how the interior is presented in the finished model. The cab structure also supports a more technical display of the truck's architecture, while the detailed engine and frame add substance beneath the body. Waterslide decals supply FH Year Edition graphics, dashboard markings, country identifiers and multiple European-style registration options, allowing different finishing directions within the same subject. The box also contains photo etched parts for finer metal-style detail. On the workbench, this 1:24 truck kit suits a measured build with painting, decal placement and detail finishing spread across stages rather than rushed into one session. Once completed, the Volvo FH4 Globetrotter XL sits naturally in a commercial vehicle collection, on a shelf beside other 1:24 transport subjects, or as a standalone display focused on modern European truck design. Paints, cement and tools are required separately.

Italeri 1:24 Volvo FH4 Globetrotter XL Kit
Italeri 1:35 1/4 Ton 4x4 US Ambulance Vehicle

Model tanks

Italeri 1:35 1/4 Ton 4x4 US Ambulance Vehicle

510000326

€11.99

Italeri 1:35 1/4 Ton 4x4 US Ambulance Vehicle captures a field-converted military jeep in a compact 11.8 cm scale model that brings the ambulance role of this well-known 4x4 into clear focus. The assembly kit centers on the distinctive rescue layout, where the familiar open vehicle form is reworked with stretcher-carrying structures and medical insignia for a markedly different silhouette. The 1:35 scale suits detailed finishing work, especially across the body panels, grille, wheels, cabin area, and external ambulance fittings visible in the kit presentation. Decals for 2 versions open two historically themed directions, covering U.S. 2nd Armoured Division Normandy 1944 and British Army Normandy 1944. That choice changes the final look through unit markings and insignia rather than altering the core vehicle, which keeps the build focused while still offering variation. Assembly takes 600 minutes, giving time for careful handling of the construction stages and for a measured paint approach across the military surfaces and medical markings. On a shelf, the completed ambulance jeep reads clearly as a support vehicle rather than a standard utility 4x4, with its stretcher layout setting the scene at a glance. In a 1:35 display, it can anchor a Normandy-themed arrangement, sit beside other military vehicles, or stand alone as a compact historical model with a strong service identity.

Italeri 1:35 1/4 Ton 4x4 US Ambulance Vehicle
Italeri 1:35 20' Military Container Model Kit

Military figures & accessories

Italeri 1:35 20' Military Container Model Kit

510006516

€21.99

The Italeri 1:35 20' Military Container model kit brings a standard military logistics element into scale scenes with a completed length of 17.4 cm, corrugated wall panels and detailed end-door hardware that gives the container a convincing industrial look. One end door can be shown opened, adding visible access to the interior and giving loading bays, transport yards and support areas a more active layout. This assembly kit is based on a 100% new mould and centers on the structure of a real 20-foot freight container, a format used across ship, rail and truck transport because its standardized dimensions support intermodal handling. The model translates that familiar full-size form into 1:35 scale for military dioramas and vehicle displays. Decals for 3 versions provide specific marking paths for U.S. Army, U.S. Marine Corps and Italian Air Force finishes, including ownership markings, serial codes and load data panels. Assembly time is listed as 600 minutes. Paints, cement and tools are required separately. Placed beside military vehicles, stacked in a depot scene or used as a standalone cargo detail, the container adds context that connects transport, storage and ground support activity. The open-door option also suits loading or maintenance setups where the interior needs to remain visible during display.

Italeri 1:35 20' Military Container Model Kit
Italeri 1:35 Observation Post Model Kit

Military figures & accessories

Italeri 1:35 Observation Post Model Kit

510000418

€9.49

The Italeri 1:35 Observation Post model kit brings vertical structure and field detail into a scale scene with an elevated lookout design, a ladder, an upper platform and a roofed top section. As an assembly kit, it focuses on the build itself, with unassembled parts arranged on sprues and a finished form that reads clearly as a raised post for dioramas and display settings. The 1:35 scale makes the Observation Post easy to combine with military vehicles, figures and terrain elements in the same proportion. Cross-braced side frames define the support structure, while horizontal beams connect the main body and create the base for the upper level. Wood-textured panels shape the enclosed section and give painted finishes more depth across planks, edges and weathered effects. The roof panel sits above slim supports, adding another distinct layer to the silhouette and helping the structure stand out in open layouts. With 600 minutes of assembly time, this kit suits model builders who want a focused construction project rather than a quick accessory add-on. The finished tower can anchor a checkpoint scene, overlook a camp perimeter or add height variation beside vehicles, figures and ground cover. On a shelf or in a diorama, the ladder access, raised stance and sheltered top platform create a clear visual focal point within a 1:35 setting.

Italeri 1:35 Observation Post Model Kit
Italeri 1:35 WWII US Off-Road Support Vehicle

Model tanks

Italeri 1:35 WWII US Off-Road Support Vehicle

510000314

€15.99

Italeri 1:35 WWII US Off-Road Support Vehicle brings a classic light military vehicle into a compact scale build with a finished model length of 14 cm. The assembly kit combines the jeep with a trailer, creating a small convoy-style subject that carries the look of wartime transport and support equipment in one display piece. The 1:35 scale gives the body, wheels, trailer structure, and exterior fittings enough presence for careful painting and weathering work. The kit is designed for assembly and lists a build time of 600 minutes, making it suited to a longer bench session with steady progress across chassis, body sections, and smaller details. Decals for 1 version are included for the finishing stage, adding the markings that complete the chosen scheme. The source material behind the vehicle reflects the wartime development of a light multi-purpose 4x4 and the broad service history that made this type one of the most widely produced military light vehicles of the period. On a shelf, in a cabinet, or as part of a 1:35 diorama, the combination of vehicle and trailer creates a focused historical scene with more visual depth than a standalone jeep. The compact footprint also leaves room to place terrain, figures, or other period accessories around the completed build. Minimum age: 14 years

Italeri 1:35 WWII US Off-Road Support Vehicle
Italeri 1:48 HURRICANE Mk.I Plastic Kit

Military aeroplane models

Italeri 1:48 HURRICANE Mk.I Plastic Kit

510002802

€41.99

The Italeri 1:48 HURRICANE Mk.I is a detailed plastic kit built around one of the Royal Air Force's defining fighters from the opening phase of World War II. At 20.5 cm long, the finished aircraft brings the compact proportions of the Hawker Hurricane into a scale format that suits both focused bench work and display once complete. The subject reflects the Hurricane Mk.I configuration with a Rolls-Royce Merlin 12-cylinder liquid-cooled engine rated at more than 1,000 HP and an armament layout of eight 7.7 mm Browning machine guns. In service, this fighter exceeded 500 km/h and played a major role during the Battle of Britain alongside the Spitfire. The kit also comes with super decals for 4 versions, opening different marking paths for the same airframe and giving the finishing stage a stronger historical angle. A color instruction sheet supports paint placement and decal application with visual guidance across the build. On the workbench, the 1:48 scale gives enough room to develop paintwork, markings, and small details without demanding the footprint of a larger aircraft model. Once assembled, the Hurricane's wing shape, cockpit area, and wartime profile make it a natural centrepiece for a World War II aircraft lineup, whether displayed on its own or alongside other RAF subjects.  Warning! Not suitable for children under 14 years.

Italeri 1:48 HURRICANE Mk.I Plastic Kit
Italeri 1:48 US F-22A Raptor model kit

Military aeroplane models

Italeri 1:48 US F-22A Raptor model kit

510002822

€34.99

Italeri 1:48 US F-22A Raptor captures the distinctive form of the Lockheed Martin-Boeing stealth fighter in a detailed plastic model build. The sharply angled surfaces, twin vertical stabilizers and compact fuselage layout give the finished aircraft the unmistakable silhouette of a 5th generation USAF jet, creating a striking presence on the workbench and in a display cabinet. The full-size F-22 is powered by 2 Pratt & Whitney F119 turbofan engines with afterburners and vector thrust through the exhaust nozzles, and this kit draws on that advanced aircraft design for its overall shape and technical character. The original aircraft combines aerodynamic profiling with high-tech materials to reduce radar detectability, while the intake and exhaust design also supports lower heat and noise signatures. Internal loading bays for air-to-air and air-to-surface armament are another defining feature of the aircraft concept, and the advanced avionics are built for long-range target detection, tracking and acquisition. In the model, these design cues translate into a build centered on modern combat-aircraft geometry rather than exposed external stores. With an assembly time of 600 minutes, the kit offers a substantial project for model builders aged 14 years and up. The included assembly kit is supported by a decals sheet for 3 marking versions, adding unit insignia, serials, rescue markings and weapons stencils that sharpen the final finish. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Italeri 1:48 US F-22A Raptor model kit
Italeri 1:56 US M4 Sherman 75 mm Model Kit

Model tanks

Italeri 1:56 US M4 Sherman 75 mm Model Kit

510025751

€21.99

The Italeri 1:56 US M4 Sherman 75 mm model kit brings one of the most widely used American medium tanks of the Second World War into a compact 10.2 cm format. This 43-part assembly kit captures the early Sherman M4A1 configuration with its rounded hull, cast turret and 75 mm gun, giving the finished tank the distinctive profile seen on wartime vehicles from 1942. The build centers on core armored vehicle elements such as the upper and lower hull, turret assembly, running gear and track sections. Instruction imagery shows hatch position options and turret installation into the circular hull opening, adding mechanical interest during construction. Decals for 2 versions allow the finished model to be completed with U.S. Army markings or an alternative Russian Army WWII scheme. The included assembly kit is intended for model builders aged 14 years and over. On the workbench, the 1:56 scale keeps the project manageable while still leaving room for painted details across the hull, turret and tracks. Once completed, the Sherman sits well in military model displays, diorama scenes or focused World War II collections, where the compact footprint and recognizable silhouette make it easy to place alongside other armored vehicles. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Italeri 1:56 US M4 Sherman 75 mm Model Kit
Italeri 1:72 100 Years War British Warriors

Model figures

Italeri 1:72 100 Years War British Warriors

510006027

€10.99

Italeri 1:72 100 Years War - British Warriors brings a key medieval force into miniature form with an assembly kit centred on the British side at Agincourt. The 1:72 scale gives the set a compact footprint for display shelves, historical layouts and battle dioramas while still leaving room for visible armour, weapons, shields and horse tack once the parts are finished. The subject draws on the battle of 25 October, when Henry V's army faced the forces of Charles d'Albret, and the set reflects that mix of foot troops and noble mounted fighters. Archers, infantry figures, rider poses, horses and a banner create a broader battlefield composition than a single troop type alone. The longbow is a defining element of the historical theme, linking the figures directly to the English tactic described in the source material. Unpainted components arrive on sprues and are intended for clipping, assembly and painting as part of the modelling process. Assembly is required and takes 600 minutes. Once completed, the figures can be arranged into defensive lines, marching groups or cavalry-supported scenes with sharpened stakes, shields and heraldic details added through finishing work. The set suits medieval collections, wargame-style table scenes and diorama builds that focus on the 100 Years War. Age 14+

Italeri 1:72 100 Years War British Warriors
Italeri 1:72 2nd WW German Paratroopers Kit

Military figures & accessories

Italeri 1:72 2nd WW German Paratroopers Kit

510006045

€10.99

Italeri 1:72 2nd WW German Paratroopers is an assembly kit built around 50 scale figures for World War II scene building. The 1:72 format gives dioramas, battlefield layouts, and historical displays a compact troop presence, while the unpainted parts leave room for individual finishing choices across uniforms, equipment, and weapons. The set draws on the history of German Fallschirmjager, whose operations included the conquest of Crete during Operation Merkur in May 1941 and the fighting at Montecassino in March 1944 under General Kurt Student's 1st Division Fallschirmjager. That background gives the figures a defined military setting for recreating airborne actions, elite infantry positions, or defensive scenes among damaged buildings and rubble. The assembly time is stated as 600 minutes, so the build can be approached as a longer modelling project with separate stages for removing parts from the sprues, preparing joins, and painting the finished figures. Placed across fortifications, ruined monasteries, or urban combat layouts, the 50-figure count helps larger 1:72 scenes feel populated rather than sparse. The mix of poses supports movement, cover, and firing positions, which adds rhythm and direction to historical displays on shelves, in cabinets, or as part of a wider military collection.

Italeri 1:72 2nd WW German Paratroopers Kit
Italeri 1:72 F-22 Raptor Aircraft Model Kit

Military aeroplane models

Italeri 1:72 F-22 Raptor Aircraft Model Kit

510001207

€19.99

The Italeri 1:72 F-22 Raptor assembly kit captures the angular form of the U.S. Air Force air superiority fighter in a compact aircraft model with a finished length of 24 cm. Its stealth-style layout, swept surfaces and twin tail fins give the build a crisp modern profile that stands out during assembly and once placed on display. The subject is presented as a 1:72 scale model, a format that brings the aircraft's proportions into a manageable size for bench work while still leaving room for surface finishing and markings. The F-22 design is described with internal weapons carriage inside the fuselage, a detail tied to reduced radar detection and cleaner aerodynamic lines. Source information for the aircraft also points to advanced engine technology that enables supersonic speed without afterburners, along with sophisticated electronic equipment for weapons control, giving the finished build a strong connection to the real aircraft's role and engineering. With assembly required and a stated build time of 600 minutes, this kit suits focused sessions of cutting, fitting, painting and applying the included decal sheet for 1 version. On the bench, the compact 24 cm size keeps the project easy to handle, while the finished aircraft shape gives shelves, desks and display cabinets a clear modern aviation focal point.  Warning! Not suitable for children under 14 years.

Italeri 1:72 F-22 Raptor Aircraft Model Kit
Italeri 1:72 French Heavy Cavalry Model Kit

Model figures

Italeri 1:72 French Heavy Cavalry Model Kit

510006003

€10.99

Italeri 1:72 French Heavy Cavalry brings Napoleonic mounted troops into a compact model kit that combines historical subject matter with hands-on building. The set builds 17 horsemen, creating the look of a heavy cavalry formation with riders, horses and battlefield movement captured at 1:72 scale. The subject draws on the French heavy cavalry arm in which carabiners served alongside cuirassiers, troops known for their shining cuirasses and imposing battlefield presence. Mounted poses with sabres, lances and a trumpet figure give the formation visual variety while keeping the unit coherent for display. The unassembled parts are arranged on sprues, which helps separate preparation, painting and final fitting into clear stages across the build. Assembly is required, and the stated build time is 600 minutes. The kit is marked 14 Years, matching its scale-model focus and detailed construction format. On a shelf, in a historical diorama or as part of a larger Napoleonic scene, the completed cavalry unit adds motion and structure to the setting. The troop formation works well beside infantry, artillery and terrain pieces, whether the aim is a Borodino-inspired reserve line or a Waterloo-era charge composition.

Italeri 1:72 French Heavy Cavalry Model Kit
Italeri 1:72 German Infantry Figure Set

Military figures & accessories

Italeri 1:72 German Infantry Figure Set

510006033

€10.99

Italeri 1:72 German Infantry brings a full formation of 50 figures into World War II model scenes, with feldgrau uniforms and period infantry equipment that give the set a clear historical identity on the workbench and in the finished display. The 1:72 scale fits naturally into compact battlefield layouts, convoy scenes, and wider diorama compositions where troop density matters. The figures are supplied as an assembly kit and require about 600 minutes for assembly, making this set suited to builders who want a substantial figure project rather than a quick single-session task. The subject represents Wehrmacht infantry units used on European and North African fronts from 1939 to 1945, which opens up a broad range of historically grounded scene planning. Different poses visible on the sprues support marching, advancing, kneeling, aiming, and support-position arrangements. Uniform gear shown across the figures includes combat loadout details such as pouches, packs, and helmets that add depth once painted. Mauser K-98 rifles and MP40 submachine guns give the set recognizable small arms for period-specific staging. The figures can be arranged around vehicles, buildings, terrain sections, or defensive positions to create movement, scale, and narrative across a military display. Age marking: 14 Years.

Italeri 1:72 German Infantry Figure Set
Italeri 1:72 Ju-52/3m Aircraft Model Kit

Military aeroplane models

Italeri 1:72 Ju-52/3m Aircraft Model Kit

510000102

€34.99

Italeri 1:72 Ju-52/3m is a detailed aircraft model kit built around one of the most recognizable transport aircraft designs of the 1930s and 1940s. The tri-motor configuration, broad wing layout, and corrugated metal fuselage panels give the finished model a strong period character, whether placed in a collection cabinet or worked into a historical diorama. The assembly kit uses plastic parts and clear molded sections for the glazed areas, with the build progressing through fuselage, wing, tail, and upper detail stages shown across the instruction sequence. Version-specific parts support different historical finishes, and the decal guide covers 3 schemes: a Luftwaffe medical evacuation aircraft from fall 1939, a KG 500 aircraft from the Stalingrad pocket airlift in winter 1942/43, and a transport used during Unternehmen MERKUR on Crete on 20 May 1941. The box data also states that 6 figures are included, adding extra context for display scenes around the completed aircraft. With 1:72 scale proportions, the model suits shelves, aviation collections, and compact diorama layouts while still leaving room for camouflage work, insignia placement, and weathering detail. Assembly is required, with a stated assembly time of 600 minutes, and the age marking is 14 Years. Paints, cement, and tools are required separately.  Warning! Not suitable for children under 14 years.

Italeri 1:72 Ju-52/3m Aircraft Model Kit
Italeri 1:72 Napoleonic Wars French Infantry

Model figures

Italeri 1:72 Napoleonic Wars French Infantry

510006066

€11.99

Italeri 1:72 Napoleonic Wars - French Infantry brings a full historical troop set into miniature form with 48 figures designed for assembly. The 1:72 scale gives enough presence for battlefield layouts while keeping the footprint compact for shelf displays, campaign scenes or wargaming tables. The set draws on French line infantry from the Napoleonic Wars, a formation style defined by close-order advance and support from light units. The source theme names Chasseur, Tirailleurs and Voltigers as part of that wider battlefield context, opening the door to scenes that show pressure on enemy lines, command disruption and shifting formations. On the sprues, the figures appear in a range of action poses including marching, aiming, kneeling and advancing, with a drummer and a standard bearer adding command and signal detail to the group. The unpainted parts leave room for regiment colours, weathering and basing choices to shape a specific campaign look. Assembly is required, and the stated assembly time is 600 minutes. Once built, the figures suit dioramas, historical displays and tabletop battle setups where ranked infantry, skirmish elements and command figures need to read clearly at a glance.

Italeri 1:72 Napoleonic Wars French Infantry
Italeri 1:72 US P-51A Mustang Model Kit

Military aeroplane models

Italeri 1:72 US P-51A Mustang Model Kit

510001423

€16.99

The Italeri 1:72 US P-51A Mustang model kit brings one of the best-known piston engine fighters of World War II into a compact aircraft build with strong historical character. This assembly kit focuses on the early P-51A variant, the version that entered service in 1942 with the Allison V-1710 engine and a top speed of 650 km/h, giving the finished model a clear place in the Mustang story. The subject itself adds depth to the build. The real aircraft carried 4 wing-fitted 12.7 mm Browning machine guns and could be equipped with 2 underwing fuel tanks for extended range, details that shape the look and role of the model. The kit also opens up 6 finishing versions, spanning U.S. Air Force and RAF service, including the Mustang Mk.II designation. Decal choices cover serial numbers, national insignia, squadron markings, invasion stripes and nose art, so each scheme can take on a distinct wartime identity. At 1:72 scale, the model fits easily into a display cabinet, on a shelf or into a wider World War II aviation lineup. The 600-minute assembly time gives space for careful work on the cockpit, airframe and final paint finish, whether the goal is a clean historical presentation or a more weathered combat look. Recommended age: 14+  Warning! Not suitable for children under 14 years.

Italeri 1:72 US P-51A Mustang Model Kit
Italeri 1:72 WW2 British Infantry Figure Set

Military figures & accessories

Italeri 1:72 WW2 British Infantry Figure Set

510006056

€10.99

Italeri 1:72 WW2 British Infantry brings a D-Day themed figure set into a compact scale that suits detailed military scenes and historically focused collections. The set contains 42 figures and centres on British Expeditionary Force troops linked in the source material to the Normandy landings at Sword, Juno, and Gold, giving the build a defined World War II setting rather than a generic infantry theme. The figures arrive as an assembly kit on sprues, so the build involves removing the parts, assembling the miniatures, and preparing them for painting and placement. An assembly time of 600 minutes points to a substantial hobby project with room for careful finishing across the full group. The 1:72 scale works well for combining infantry with vehicles, terrain pieces, and beach assault layouts from the same period. Different body positions visible across the set help create movement in a scene, with figures posed for advancing, kneeling, aiming, and supporting battlefield actions. On a shelf, in a cabinet, or across a larger diorama base, the 42-figure count gives enough material to shape a landing sequence, defensive line, or marching formation with more visual variation. The historical framing around Caen and the Normandy beaches also supports period-specific painting choices and display planning for collectors and model builders aged 14 years and up.

Italeri 1:72 WW2 British Infantry Figure Set
Italeri 1:72 WW2 German Elite Troops Model Kit

Military figures & accessories

Italeri 1:72 WW2 German Elite Troops Model Kit

510006068

€13.99

Italeri 1:72 WW2 - German Elite Troops (SS) is an assembly kit built around a specific late-war setting, placing 48 figures into the Ardennes offensive in Belgium on 16 December 1944. The 1:72 scale suits compact battle layouts while still leaving room to stage infantry movement, firing lines, and support positions across a diorama base. The historical reference in the kit points to the Wacht am Rhein offensive under General Von Rundstedt and to the siege of Bastogne on 21 December 1944, where the 101st Airborne Division defended the town. That context gives the set a clear place within Western Front collections rather than a generic infantry role. Uniform and equipment details support that focused theme, and the figure group is shaped for varied scene building instead of a repeated row of matching poses. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the set supports painting, basing, and terrain work for winter combat scenes, fortified positions, and small-scale historical displays. Once assembled, the figures can be arranged as a concentrated combat unit, spread through woodland cover, or combined with vehicles and structures in 1:72 scale collections.

Italeri 1:72 WW2 German Elite Troops Model Kit
Italeri 1:72 WWII American Infantry Model Kit

Military figures & accessories

Italeri 1:72 WWII American Infantry Model Kit

510006046

€10.99

Italeri 1:72 WWII American Infantry is an assembly kit that brings the look of the 1st Infantry Division into a compact scale suited to military dioramas and historical displays. The set contains 50 figures, giving enough miniatures to build a broad infantry presence with movement, spacing, and unit variety across a scene. The figures are represented with the typical equipment of American infantry during World War II, including the M1 Garand rifle, the B.A.R. automatic rifle, the M3 'Grease Gun' submachinegun, and the Bazooka. That mix supports different battlefield roles within the same set, from riflemen and automatic fire support to close-range submachine gun poses and anti-tank coverage. The 1:72 scale works well for combining the figures with vehicles, terrain pieces, and structures in the same scale. Assembly is required and takes 600 minutes. The kit comes as an assembly kit and the parts are supplied unpainted, leaving the finish open for historically inspired uniform colours and scene-specific detailing. The campaign background reaches from Operation Torch in November 1942 to Sicily, Normandy on June 6th 1944, the Ardennes, and the final advance into German territory in 1945. That span makes the set suitable for beach landings, winter battle layouts, road marches, or urban combat scenes where varied infantry poses help shape a more convincing composition.

Italeri 1:72 WWII American Infantry Model Kit
Italeri 1:72 WWII American Infantry Model Kit

Military figures & accessories

Italeri 1:72 WWII American Infantry Model Kit

510006120

€12.49

Italeri 1:72 WWII American Infantry brings a large formation of U.S. Army soldiers into a compact military model kit, with 48 unpainted figures arranged for historical scenes inspired by Operation Overlord. The 1:72 scale suits dioramas where troop movement, spacing, and battlefield structure matter, whether the layout focuses on a shoreline assault, an inland advance, or a defensive firing line. The set draws on the 1st and 29th Infantry Division, part of the Fifth Corps, and connects directly to the June 6th, 1944 landing at Omaha Beach between Vierville sur Mer and Sainte Honorine des Pertes. Across 3 sprues, the figures appear in varied action stances that help shape a more convincing unit composition instead of a repeated row of identical soldiers. Uniform gear and weapon handling reflect typical U.S. infantry equipment from the period, while the mix of rifles, automatic weapons, and support gun positions gives the group a clear battlefield character. The parts arrive unpainted, leaving full control over colour scheme, weathering, insignia style, and terrain matching. With a stated assembly time of 600 minutes, this kit suits longer bench sessions focused on trimming, painting, and arranging figures into a coherent scene. It can anchor a Normandy landing display, reinforce a larger World War II terrain build, or expand an existing 1:72 military collection with a substantial infantry presence.  Warning! Not suitable for children under 14 years.

Italeri 1:72 WWII American Infantry Model Kit
Italeri A-10 Gulf War Aircraft Model Kit 1:72

Military aeroplane models

Italeri A-10 Gulf War Aircraft Model Kit 1:72

510101376

€22.99

Italeri A-10 Gulf War brings the unmistakable lines of the A-10 Thunderbolt II into a 1:72 scale aircraft model kit with a finished length of 22.6 cm. The twin-engine ground-attack aircraft layout, straight wing planform and compact display size give the completed build a strong presence on a shelf, desk or in a wider military aviation collection. The subject draws on the A-10 developed by Fairchild Republic for close air support missions, with the type's heavily armoured design, 30 mm GAU-8/A Avenger cannon and broad external stores capacity forming the historical basis of the model. Eleven underwing and under-fuselage pylons defined the real aircraft's offensive load potential, and that combat-focused configuration shapes the character of this kit. The included super decals sheet covers 4 versions, with marking choices spanning Gulf War-era A-10A aircraft and later A-10C schemes shown in the reference material. Assembly is required, and the stated build time is 600 minutes. That combination of scale, subject and marking choice suits builders who enjoy military aircraft with a clear operational identity. During painting and finishing, the 4-version decal selection opens different visual directions, from desert-war context to later service appearances, while the 22.6 cm format keeps the completed aircraft easy to place in a cabinet or alongside other 1:72 aviation builds.

Italeri A-10 Gulf War Aircraft Model Kit 1:72
Italeri A-20B / Boston III Aircraft Model Kit 1:48

Military aeroplane models

Italeri A-20B / Boston III Aircraft Model Kit 1:48

510002656

€45.99

The Italeri A-20B / Boston III assembly kit captures the lines of the twin-engine Douglas aircraft in 1:48 scale, combining a glazed bomber nose, tricycle landing gear layout and period camouflage options in one detailed aircraft build. Fine exterior molding and transparent sections give the fuselage, cockpit and nose area the layered look that defines this WWII design. The kit is built around multiple sprues with dedicated clear parts, separate tail components, engine nacelles, propellers, landing gear elements and external stores. Version-specific parts support several historical finishes, and the decal sheet covers 5 liveries including RAF, Free French and USAAF aircraft. The instructions also call for 30 g of nose weight to support the model's stance after assembly. Bomb bay configuration can be handled in different ways, with an open or closed layout shown in the build sequence, and the underside can also carry the optional long range tank. Figures are not included. On the bench, the 600 minute assembly time leaves room for careful trimming, painting and decal placement across the framed canopy, engine fronts and wing surfaces. Once completed, the 1:48 scale format gives the Boston III / A-20B enough presence for a display shelf while still leaving space to appreciate details such as squadron markings, invasion stripes or the Lady Jean nose art from the included options.  Warning! Not suitable for children under 14 years.

Italeri A-20B / Boston III Aircraft Model Kit 1:48
Italeri A-26B Invader Aircraft Kit 1:72

Military aeroplane models

Italeri A-26B Invader Aircraft Kit 1:72

510001274

€36.99

The Italeri A-26B Invader in 1:72 scale brings the lines of Douglas' twin-engine attack aircraft into a compact model kit with a strong historical identity. This detailed aircraft build focuses on the B variant, the most widely produced version of the Invader, known for its heavily armed closed nose and its long operational career across several major conflicts. The original aircraft entered frontline service in 1944 and remained in use well beyond World War II, appearing later in the Korean, Indochina and Vietnam wars. That long service life gives the A-26B Invader a broad historical context that stands out in a collection of military aircraft. The source aircraft was powered by 2 Pratt & Whitney R-2800 Double Wasp radial engines, each rated at 2000 horsepower. At full operational load, the Invader could reach 570 km/h, a figure that underlines the performance behind its purposeful airframe. Marking options add another layer of detail to the finished model, with a super decal sheet for 4 versions included in this new decals edition. The 1:72 scale keeps the aircraft manageable on the workbench and easy to place in a display cabinet alongside other aviation subjects. Recommended age: 14 years.  Warning! Not suitable for children under 14 years.

Italeri A-26B Invader Aircraft Kit 1:72
Italeri A-4E/F/G Skyhawk Aircraft Model Kit 1:48

Military aeroplane models

Italeri A-4E/F/G Skyhawk Aircraft Model Kit 1:48

510002826

€35.99

The Italeri A-4E/F/G Skyhawk in 1:48 scale recreates one of the best-known light attack aircraft of the 1950s in a format that suits detailed bench building and display. Its compact Douglas airframe, low-mounted delta wing configuration and side-mounted air intakes give the finished model the lean, agile look that made the original Skyhawk a familiar sight on aircraft carriers. This assembly kit covers A-4E, A-4F and A-4G versions and draws on service histories that reached beyond the United States to operators including Australia, New Zealand, Kuwait and Israel. The real aircraft used a single Pratt & Whitney J52 turbojet engine and carried 2 20 mm guns, with hard points under the wings and fuselage for missiles, rockets and bombs; those operational traits shape the character of the model and its external stores. Paint and marking references in the set show multiple liveries, including naval and air force schemes with unit insignia, serials and warning stencils. Kit, instructions and decor are included. With a stated assembly time of 600 minutes, the build lends itself to steady work sessions focused on airframe alignment, surface finishing and decal application. On a shelf, desk or in a larger aviation collection, the completed Skyhawk brings carrier-era jet history into a clear 1:48 display presence.

Italeri A-4E/F/G Skyhawk Aircraft Model Kit 1:48
Italeri A-6E TRAM Intruder Aircraft Model Kit 1:72

Military aeroplane models

Italeri A-6E TRAM Intruder Aircraft Model Kit 1:72

510101392

€27.99

Italeri A-6E TRAM Intruder captures the look of the U.S. Navy attack aircraft in 1:72 scale, translating the broad fuselage, side-by-side cockpit layout and carrier-based profile into a 23 cm display build. The subject represents the A-6E TRAM version, the variant fitted with the laser target designation system that defined the later Intruder's all-weather strike role. The assembly kit uses molded parts on multiple sprues and includes a clear sprue for canopy elements, plus a super decals sheet for 2 marking options. The airframe can be finished as a U.S. Marines aircraft from Shaikh Isa Air Base, Bahrain, 1992 or as a U.S. Navy aircraft from USS America, 1976. Instruction diagrams also indicate 20 g of ballast in the nose during assembly, a practical detail that helps the completed aircraft sit correctly on its landing gear. Underwing pylons, tanks and weapon stores add configuration depth, while the decal sheet extends the finish with walkway markings, serials, insignia, cockpit instruments and weapon stencils. With an assembly time stated as 600 minutes, the build suits a slower, step-by-step approach at the workbench. The finished model works equally well as a Gulf War themed display aircraft, a U.S. naval aviation subject, or a painting project focused on camouflage, panel detail and squadron markings.

Italeri A-6E TRAM Intruder Aircraft Model Kit 1:72
Italeri A-7E Corsair II Model Kit 1:48 Scale

Military aeroplane models

Italeri A-7E Corsair II Model Kit 1:48 Scale

510002797

€39.99

The Italeri 1:48 A-7E Corsair II model kit captures the distinctive lines of the U.S. Navy light attack aircraft in a 29.0 cm format that gives the finished build a strong shelf presence. Built from ESCI moulds, the assembly kit focuses on the final A-7E version, known for its carrier-based role, its large frontal air intake under the cockpit and its 35° swept wing with foldable outer sections on the full-size aircraft. The subject matter adds historical depth as well as visual character. The real A-7E was developed to replace the Douglas A-4 Skyhawk and A-1 Skyraider, and its operational configuration expanded to carry conventional bombs, guided Paveway bombs and air-to-surface missiles. On the full-size aircraft, a Head-up-Display formed part of the updated combat equipment, while underwing hardpoints defined its attack role. The included super decals sheet opens 4 finishing versions, with markings shown for U.S. Navy squadrons including VA-72 Blue Hawks, VA-22 Fighting Redcocks and VA-83 Rampagers. With a stated assembly time of 600 minutes, the build suits modelmakers who enjoy a project with room for careful painting and decal work. The 1:48 scale gives enough surface area for squadron markings, service stencils and camouflage contrasts to stand out across wings, fuselage and tail. Paints, tools and cement are required separately.

Italeri A-7E Corsair II Model Kit 1:48 Scale
Italeri A-7E Corsair II Model Kit 1:72 Scale

Military aeroplane models

Italeri A-7E Corsair II Model Kit 1:72 Scale

510001411

€22.99

Italeri A-7E Corsair II brings a classic U.S. Navy light attack aircraft into 1:72 scale with a finished length of 195 mm and the compact proportions that suit shelf display, cabinet presentation or a focused aircraft lineup. The assembly kit captures the A-7E, the final U.S. Navy production version of the Corsair II, with the broad intake under the cockpit and the swept wing layout that defined the aircraft on carrier decks. The original aircraft was developed in the first half of the 1960s to answer a U.S. Navy requirement for a new carrier-capable light attack aircraft, replacing the Douglas A-4 Skyhawk and the piston-powered Douglas A-1 Skyraider. It was derived from the Vought F-8 Crusade airframe and combined a 35° foldable swept wing with underwing hardpoints for conventional bombs, guided bombs such as Paveway, and air-to-surface missiles. On the A-7E version, improved operational capability also included compatibility with Harpoon anti-ship missiles and AGM-88 HARM anti-radiation missiles. The color instruction sheet supports the painting stage, while the decal sheet covers 4 versions with squadron and stencil detail. The 600-minute assembly time suits a build approached in stages, from cockpit and fuselage work to wing assembly and final markings. Once completed, the model fits naturally into Cold War naval aviation collections, U.S. Navy aircraft displays, or dioramas centered on carrier air wing subjects.

Italeri A-7E Corsair II Model Kit 1:72 Scale
Italeri AB 212/UH-1N Helicopter Model Kit 1:48

Military helicopters

Italeri AB 212/UH-1N Helicopter Model Kit 1:48

510002692

€25.99

Italeri AB 212/UH-1N is a 1:48 assembly kit that recreates a medium utility helicopter with a finished model length of 36 cm. The subject traces back to the twin-turbine UH-1N family developed by Bell Helicopter at the end of the 1960s, while the AB-212 designation identifies the licensed Italian-built version produced by Agusta Westland. The airframe is defined by a 2-blade rotor and a fuselage extended beyond model 205, giving this helicopter its distinctive profile. Power in the full-size aircraft comes from 2 Pratt & Whitney PT6T turboshaft turbines rated at 1.342 kW, a technical detail that helps place the type within the utility and military transport class. The kit also draws on the later operational update applied in the first half of the 2000s, when the AB 212 received equipment to expand mission capability. That configuration introduced 2 swivelling 7.62 mm machine guns on the tailgates, antimissile flare launchers, and additional ceramic and kevlar armour for crew protection. These details connect the build to real service use, including Italian AB 212 helicopters employed in Afghanistan from 2006 within the International Security Assistance Force mission. On the bench, that background gives extra meaning to the painting and decal stages, whether the focus is historical context, technical shape, or military aviation display. Paints are required separately.  Warning! Not suitable for children under 14 years.

Italeri AB 212/UH-1N Helicopter Model Kit 1:48
Italeri Accessories model kit 1:35 scale set

Military figures & accessories

Italeri Accessories model kit 1:35 scale set

510000407

€9.49

Italeri 1:35 Accessories is a model kit built to add field equipment and combat detail to military dioramas. The set combines miniature weapons, storage pieces and personal gear in one scale, so vehicle displays, infantry positions and terrain sections can be arranged with more visual structure and period character. Among the included parts are an 81 mm mortar with ammunition boxes, Browning M1919 A4 machine guns, BREN Mk. II guns, Thompson M1928 A1 submachine guns, Sten Mk. II guns, Garand M1 rifles, Lee-Enfield Mk. I rifles, Winchester M1 rifles and a 60.3 mm bazooka. The set also adds helmets, grenades, binoculars, pouches, sacks, satchels, a jerry can and several wooden and metal crates. This mix supports different scene layouts, from a dug-in firing point to a supply area beside a parked vehicle. Because the parts are all scaled to 1:35, they can be distributed across terrain, figures and vehicle surroundings without breaking the visual proportion of the build. The 600-minute assembly time points to a project with room for careful preparation, painting and placement. On a shelf, the accessories can frame a tank, truck or artillery piece with extra context. On a diorama base, the same parts can mark out ammunition storage, infantry equipment drops or a support weapon position, giving the finished scene more depth than a vehicle-only display.

Italeri Accessories model kit 1:35 scale set
Italeri Acrylic Paint Flat Dark Earth 20 ml

Model paints

Italeri Acrylic Paint Flat Dark Earth 20 ml

510004303

€3.69

Italeri Acrylic Paint Flat Dark Earth 20 ml brings a muted matte tone to model finishing work, giving builders a focused colour choice for surfaces that call for an earthy, non-gloss appearance. The 20 ml bottle size suits careful paint use across detail stages, touch-ups and broader colour blocking on an assembly kit. The acrylic paint format supports measured application, which helps when working around panel lines, edges and smaller shaped sections. Flat Dark Earth fits naturally into military subjects, terrain sections and weathered scene elements where a subdued brown tone is needed. The matte character keeps the finish visually restrained rather than reflective, which can help painted sections sit more convincingly alongside dust effects, field equipment tones or ground textures. With assembly required and a stated assembly time of 600 minutes, the paint aligns well with longer model projects that move through construction, surface preparation and final colour work. During bench sessions, the 20 ml volume is practical for repeated use across separate stages instead of a single pass. The 14 Years marking is stated in the product data, making the listed age information clear while the colour itself supports steady, detail-led finishing on scale builds.

Italeri Acrylic Paint Flat Dark Earth 20 ml
Italeri AcrylicPaint Flat Ex.dr.SeaGrey 20ml

Model paints

Italeri AcrylicPaint Flat Ex.dr.SeaGrey 20ml

510004312

€3.69

Italeri AcrylicPaint Flat Ex.dr.SeaGrey 20ml brings a specific finishing colour into model work with a 20 ml paint volume and a flat Ex.dr.SeaGrey shade. The defined colour name supports matching across a build where a muted surface tone is needed on selected sections, touch-ups, or broader painted areas. This entry sits in Models & Accessories under Models Supplies, which places it clearly within a model-making context rather than general craft use. The data states assembly is required and gives an assembly time of 600 minutes, pointing to longer-form projects where painting is one stage within a more extensive construction process. The included component is listed as an assembly kit. Minimum age is stated as 14 Years. Together, these details frame the paint around structured hobby builds that call for controlled application and a planned finishing stage. On the bench, the 20 ml size is easy to place alongside other modelling supplies while keeping the selected Flat Ex.dr.SeaGrey tone ready for repeat use across the same project. It also fits builds where colour consistency matters between separate sessions, whether the work focuses on detail correction, section painting, or the final visual balance of the assembled model.

Italeri AcrylicPaint Flat Ex.dr.SeaGrey 20ml
Italeri AcrylicPaint Flat Intense Blue 20 ml

Model paints

Italeri AcrylicPaint Flat Intense Blue 20 ml

510004639

€3.69

Italeri AcrylicPaint Flat Intense Blue 20 ml brings a clearly specified paint format and colour designation into model-building supplies. The supplied data names AcrylicPaint as the medium, Flat Intense Blue as the shade, and 20 ml as the stated volume, giving a concise reference point when selecting paint for finishing work. The colour wording in the source data points to a flat blue tone with an intense character, which helps separate this entry from gloss, metallic, or effect-based finishes in a paint collection. The 20 ml size supports measured use across detail sections, smaller painted areas, and follow-up touch-up work where a full-size container may be unnecessary. Assembly is marked as required in the data, with 600 minutes listed as assembly time, and the included components field states assembly kit. The age marking is given as 14 Years. Within a bench setup for model painting, colour sorting, or supply planning, the exact combination of AcrylicPaint, Flat Intense Blue, and 20 ml keeps selection straightforward. It suits cataloguing alongside other model supplies where paint type, shade name, and container volume need to be identified quickly and consistently.

Italeri AcrylicPaint Flat Intense Blue 20 ml
Italeri AcrylicPaint Flat Ital. Interior Green

Model paints

Italeri AcrylicPaint Flat Ital. Interior Green

510004855

€3.69

Italeri AcrylicPaint Flat Ital.Interior Green brings a specific flat interior shade into model finishing work, giving compatible builds a muted green tone suited to cockpit, cabin or other internal painted areas. The colour name in the product data points to interior use, so it fits projects where a non-gloss surface helps painted sections read with a more scale-appropriate look. This entry sits in the Models Supplies range and is listed as an assembly kit accessory rather than a standalone toy, placing it within a build process that includes surface preparation, painting and final detailing. The stated assembly requirement and assembly time of 600 minutes indicate a longer-form hobby project context rather than quick application alone. Batteries are not included in the product data. The minimum age is 14 Years, matching the focused handling and finishing work typically involved in scale model painting. Used during interior painting stages, this AcrylicPaint can be applied where a build calls for a dedicated Ital.Interior Green shade instead of a general-purpose green. It suits model sessions that move from construction into colour finishing, especially when interior areas need their own distinct tone separate from the outer bodywork.  Warning! Not suitable for children under 14 years.

Italeri AcrylicPaint Flat Ital. Interior Green
Italeri AH-1W Super Cobra Model Kit 1:72

Model helicopters

Italeri AH-1W Super Cobra Model Kit 1:72

510090160

€14.49

The Italeri AH-1W Super Cobra model kit in 1:72 scale brings a well-known Bell Helicopter attack helicopter to the bench with the lean fuselage, tandem cockpit layout and mission-focused profile that defined this aircraft in service from the 1980s onward. As an evolution of the Cobra, the AH-1W combined compact attack-helicopter proportions with a layout built around a 2-person crew, placing the pilot and weapons operator in tandem to support visibility during combat operations. In full scale, the AH-1W used 2 General Electric turboshaft engines and could exceed 280 km/h, details that help explain the aircraft's fast-response battlefield role. The type served in several operational theaters, including the Gulf and Iraq, and was used by the United States Marine Corps in support of ground troops during amphibious assault operations. Its weapons fit could include TOW anti-tank missiles, AGM-114 Hellfire guided missiles and unguided rockets, giving the subject a distinctly armed late-20th-century configuration. On a shelf or within a modern military diorama, the AH-1W Super Cobra stands out through its narrow body, stepped crew arrangement and attack loadout. The 1:72 scale keeps the build manageable while still leaving room for the aircraft's defining shapes and equipment to read clearly in the finished model.  Warning! Not suitable for children under 14 years.

Italeri AH-1W Super Cobra Model Kit 1:72
Italeri Alfa Romeo Guilia 1600 Spider 1:24 Kit

Model car kit

Italeri Alfa Romeo Guilia 1600 Spider 1:24 Kit

510003668

€37.99

The Italeri Alfa Romeo Guilia 1600 Spider 1:24 kit turns a celebrated Italian roadster into a detailed scale build with the long, low lines of the original open-top car clearly carried into the finished model. Based on the Giulia Spider produced from 1962 to 1965, this assembly kit focuses on the shape changes that distinguished it from the earlier Giulietta, including the revised front hood linked to the 1,570 cc inline 4-cylinder engine. The full-size car used a synchronized 5-speed gearbox, and the model reflects that period specification through its carefully detailed cockpit and exterior layout. Interior elements such as the seats, steering wheel and instrumentation help recreate the updated cabin, while separate body components, front lighting parts, grille details and chrome-look trim areas give the build more definition as each stage comes together. The decal sheet extends that finish with badges, wheel markings and alternative European registration plates for Italy, France, Germany, the Netherlands and Spain. With a stated assembly time of 600 minutes, the kit suits a measured build pace centered on painting, fitting and final detailing. On the bench, the 1:24 scale gives enough presence for trim accents and body contours to stand out, whether the completed Spider is placed in a display cabinet or alongside other classic automotive subjects. The assembly kit is intended for ages 14 years and over.  Warning! Not suitable for children under 14 years.

Italeri Alfa Romeo Guilia 1600 Spider 1:24 Kit
Italeri Alpini Figure Set 1:72 WWII Model Kit

Military figures & accessories

Italeri Alpini Figure Set 1:72 WWII Model Kit

510006059

€10.99

The Italeri Alpini figure set in 1:72 brings WWII Italian mountain troops into compact scale for dioramas, war game tables and historical displays. With 48 unpainted figures in the box, the set gives a scene the visual mass needed for defensive lines, marching groups or retreat formations shaped around the Russian front campaign of 1942 to January 1943. The subject draws on the Alpini Julia, Tridentina and Cuneense divisions, which fought on the Don front and later retreated across the Russian steppe under severe winter conditions. That background gives the figures a clear historical setting for snowbound layouts, battlefield vignettes and campaign-based collections. The sprues show multiple infantry poses, including advancing, prone and weapon-handling stances, along with mountain troop details such as skis, poles and field gear. Horse and mounted parts also appear on the frames, adding further options for scene composition. Assembly time is stated as 600 minutes, which suits a build focused on preparation, painting and placement. On a display base, the mix of repeated figures and varied actions helps shape larger formations with a consistent uniform look. In a diorama, the winter equipment and 1:72 scale make the set easy to combine with vehicles, terrain pieces and structures from the same period. Assembly kit. Minimum age: 14 years.

Italeri Alpini Figure Set 1:72 WWII Model Kit
Italeri American Superliner Truck Model Kit 1:24

Model trucks

Italeri American Superliner Truck Model Kit 1:24

510003820

€62.99

The 1:24 American Superliner from Italeri captures the look of a classic U.S. long-haul tractor with a stretched hood, a large sleeper section and the visual weight that defines this truck category. At 35.22 cm long, the finished model brings that road-going presence onto the workbench and into the display cabinet, with the Lady Butterfly livery adding a custom show-truck character across the cab and hood. The build centers on a multi-part truck structure rather than a simple outer shell. Instruction stages show a ladder-style frame, axle modules, underbody tanks, radiator and engine-area components, followed by a separate cab interior with seats, dashboard and steering wheel. Clear glazing parts close the cab, while mirrors, roof details, bumper elements and a front guard complete the exterior. Decal placement guides cover the portrait artwork, butterfly motifs, script markings and license plate details, so the finished truck carries the same bold identity shown in the kit artwork. This assembly kit suits model builders who enjoy vehicle subjects with visible mechanical content as well as custom graphics. Assembly takes about 600 minutes. Paints, cement and tools are required separately. Once completed, the American Superliner fits naturally into truck model collections, workshop display shelves or themed dioramas built around highway transport.

Italeri American Superliner Truck Model Kit 1:24
Italeri AMX-T Twin Seater Model Kit 1:72

Military aeroplane models

Italeri AMX-T Twin Seater Model Kit 1:72

510001471

€29.99

The Italeri 1:72 AMX-T Twin Seater brings the lines of the Italian and Brazilian AMX programme into a detailed aircraft build with a two-seat cockpit layout, swept wings and the compact proportions of the original ground attack jet. As a plastic assembly kit, it focuses on the shape, markings and finishing work that give this aircraft its distinct presence on the shelf. The subject is the AMX-T, the twin-seat version developed as an advanced training aircraft with the ability to serve in ground attack and close support roles. The real aircraft used a Rolls-Royce Spey 807 engine, reached a maximum speed of 1,000 km/h and, in Italian service, carried a 20 mm M61 cannon with an offensive payload of 3,800 kg. Those background details give the finished model a clear operational identity. New parts in this release are joined by photo-etched parts for finer detail, and the super decals sheet covers 4 versions with Aeronautica Militare markings. Figures are not included. The different marking options open up several display directions, from the TA-11 MM55037 of 132° Gruppo, 3° Stormo at Kleine-Brogel AB in 1998 to MM55051 of 101° Gruppo O.C.U. 32° Stormo at Amendola AB in June 2006 and ACOL MM55049 of 132° Gruppo, 51° Stormo at Istrana AB in February 2020. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately.

Italeri AMX-T Twin Seater Model Kit 1:72
Italeri Antitank Obstacles Model Kit 1:72

Military figures & accessories

Italeri Antitank Obstacles Model Kit 1:72

510006147

€9.49

Italeri Antitank Obstacles is a 1:72 assembly kit created for static military dioramas, with 61 parts that build a varied group of defensive barriers for detailed scene composition. The set focuses on obstacle elements rather than vehicles or figures, making it a useful addition when a layout needs roadblocks, perimeter markers or fortified ground sections that read clearly at small scale. The parts assortment supports several obstacle shapes, including block forms, pyramid-style barriers and frame constructions associated with battlefield defences. That mix helps break up flat terrain and gives a scene more structure across roads, open ground or checkpoint areas. Because the kit is static, placement can be planned precisely around armour, infantry positions or damaged terrain already present in a 1:72 display. Assembly time is stated as 600 minutes, which suits a slower build with room for cleanup, painting and weathering between stages. On a shelf, in a display case or as part of a larger historical layout, the finished barriers add clear visual reference points that guide how the scene is read. Rows of obstacles can mark restricted access, shape the edge of a defended zone or create stronger depth in compact diorama footprints. Age 14 Years+

Italeri Antitank Obstacles Model Kit 1:72
Italeri AS.51 HORSA Mk.I/II 1:72 Glider Kit

Military figures & accessories

Italeri AS.51 HORSA Mk.I/II 1:72 Glider Kit

510101356

€31.49

Italeri AS.51 HORSA Mk.I/II & Brit. Paratr. brings a key Allied airborne aircraft into 1:72 scale with a finished length of 28.4 cm. The long-fuselage glider format gives the model a distinctive silhouette on the bench and in a display lineup, while the D-Day Series framing connects it directly to Normandy 1944 and the wider story of airborne operations. The subject represents the well-known British Horsa, a transport glider used to carry more than 25 troops or substantial war material and supplies. Its service history links it to the main airborne landings of World War Two, with especially strong ties to Normandy and the Arnhem bridge operation in the Netherlands. The set combines the aircraft with British paratrooper figures, so the finished scene can show the glider at rest after landing rather than as a standalone airframe. Decals are provided for 1 version, and the source material also references Operation Tonga and Pegasus Bridge markings for historically specific finishing. This assembly kit suits model builders who enjoy military aviation subjects with a clear operational setting. On a shelf, in a diorama, or as part of a D-Day collection, the Horsa and paratrooper combination creates a focused World War Two display with aircraft scale, troop context and campaign identity working together.

Italeri AS.51 HORSA Mk.I/II 1:72 Glider Kit
Italeri AS332 Super Puma Model Kit 1:72 Scale

Military aeroplane models

Italeri AS332 Super Puma Model Kit 1:72 Scale

510091096

€24.99

The Italeri AS332 Super Puma model kit in 1:72 scale brings a widely used medium twin-engine helicopter to the workbench with a detailed build centered on a recognizable 4-blade rotor layout and the aircraft's clean, purposeful lines. The AS332 Super Puma was designed by Aerospatiale, now Airbus Helicopters, and the finished model captures the form of a helicopter developed for demanding military and civilian missions. On the full-size aircraft, 2 Turbomeca engines support a cruising speed of 260 km/h, while retractable landing gear improves aerodynamics during flight. That technical background gives the build a strong real-world foundation and makes the subject especially appealing for collections focused on utility aircraft, transport helicopters, and modern rotary-wing aviation. The AS332 Super Puma also stands out for a range of 800 km and for continuous upgrades to avionics and electronic navigation support systems across its service life. Set on a shelf, in a display cabinet, or alongside other 1:72 aircraft, the completed helicopter adds a clear operational character drawn from a machine built for long-range missions. The kit suits builders aged 14 years and up who want a helicopter subject with authentic engineering context and a strong presence in modern aviation history.  Warning! Not suitable for children under 14 years.

Italeri AS332 Super Puma Model Kit 1:72 Scale
Italeri Audi Quattro Model Kit in 1:24 Scale

Model car kit

Italeri Audi Quattro Model Kit in 1:24 Scale

510003671

€32.99

The Italeri Audi Quattro model kit brings the classic road car into a detailed 1:24 scale format that places the build itself at the center of the experience. The plastic assembly kit translates the coupe silhouette, front-end character and compact proportions of the Audi Quattro into a display model that grows piece by piece across a longer bench session. With 600 minutes of assembly time stated in the data, this kit supports a measured approach to fitting, painting and final presentation. The 1:24 scale gives the finished car a balanced footprint for shelves, desks or display cabinets while still leaving room for visible body shaping and exterior detail. The assembly-kit format suits hobby sessions that can be spread across several stages, with each completed section adding more definition to the recognizable Audi Quattro form. The included component is the assembly kit itself. On a worktable, the model offers a focused car-building project with a clear subject and a well-known automotive profile. Once completed, the finished replica sits naturally among other 1:24 scale vehicles, whether arranged as a standalone display piece or as part of a broader model car collection. The age marking in the data is 14 Years.  Warning! Not suitable for children under 14 years.

Italeri Audi Quattro Model Kit in 1:24 Scale
Italeri Audi Quattro Rally Model Kit 1:24

Model car kit

Italeri Audi Quattro Rally Model Kit 1:24

510003642

€36.99

Italeri Audi Quattro Rally Model Kit 1:24 captures one of the defining rally cars of the early 1980s in a build centered on competition detail and period-correct finishing. The model is based on the Audi Quattro rally car that debuted in the World Rally Championship in 1981, bringing the shape of the 2-door coupe together with the visual character of its Monte Carlo-style racing livery. The kit uses an unpainted body shell and a multi-stage assembly layout that moves through the rolling chassis, cockpit, exterior trim and final body fit. Interior details shown in the build include racing seats, a dashboard with instrument markings, a steering wheel, a center console and a roll-cage structure. The front end can be finished with optional auxiliary rally lamps, while the rear section adds spoiler and bumper details that sharpen the competition stance. The super decals sheet covers body graphics, sponsor logos, number panels, license plates, gauges and seat markings, giving the finished model a dense layer of event-specific detail. During assembly, selected front wheel and steering connections are left unglued so movement remains in the completed chassis. That makes the build feel more mechanical while the model takes shape across the 600-minute assembly time. Paints, cement and tools are required separately. On a shelf, desk or hobby bench, the completed Audi Quattro Rally brings together classic 4-wheel-drive rally history, crisp 1:24 scale proportions and a finish that rewards careful painting and decal work.

Italeri Audi Quattro Rally Model Kit 1:24
Italeri Austerlitz 1805 Battle Set 1:72 Model

Military figures & accessories

Italeri Austerlitz 1805 Battle Set 1:72 Model

510006071

€74.99

Italeri Battle Set Austerlitz 1805 Sokol. brings the Battle of Austerlitz into a 1:72 scale model scene built around the fighting near Sokolnitz. As a detailed plastic kit marked 14 Years+, it focuses on the build itself while giving the finished layout a clear historical setting tied to one of the defining clashes of the Napoleonic Wars. The source material places the action on 2 December 1805 near Austerlitz, in the battle also known as the Battle of the Three Emperors. It sets Napoleon's Grande Armee against the allied forces of Tsar Alexander I of Russia and Emperor Francis II of Austria, and highlights the confrontation as the decisive moment of the War of the Third Coalition. The historical account also points to key locations such as Tellnitz, Sokolnitz, the granary, the castle and the Pratzen Heights, which gives the scene a specific military context rather than a generic battlefield theme. On the worktable, the 1:72 format keeps the composition manageable while still allowing a broad battle setting to take shape. Once assembled, the set suits display alongside other Napoleonic models or use as part of a larger historical collection centred on the 1805 campaign.

Italeri Austerlitz 1805 Battle Set 1:72 Model
Italeri Australian Truck Model Kit 1:24 Scale

Model trucks

Italeri Australian Truck Model Kit 1:24 Scale

510000719

€61.99

The Australian Truck from Italeri brings the road train style of long-distance outback transport into a 1:24 scale assembly kit with a finished model length of 33.2 cm. Its layout is based on the special equipment used on rugged, unsealed routes, so the build carries the visual weight of a truck prepared for extreme mileage and demanding terrain. The subject draws on the modifications named for Australian rigs, including a large bull-bar, wire mesh ahead of the windscreen, special dust filters, additional fuel tanks, heavy duty wheels, airconditioning and multiple driving lights. That combination gives the model a clear working identity rather than a generic highway truck silhouette. The kit also represents a right-hand steering configuration for this Western Star version, a detail that changes the cab layout and adds authenticity to the finished build. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the larger 1:24 format supports a measured, detail-focused build with visible progress across the cab, chassis and exterior equipment. Once completed, the 33.2 cm model suits shelf display alongside other truck subjects, while the road train theme connects it to the bulk-haul combinations that can run with up to 3 trailers over more than 31 metres in full-scale service.

Italeri Australian Truck Model Kit 1:24 Scale
Italeri Austrian & Russian General Staff 1:72

Model figures

Italeri Austrian & Russian General Staff 1:72

510006037

€12.69

Italeri Austrian & Russian General Staff 1:72 brings a defined command scene into Napoleonic model building with 5 riders and 34 figures arranged around the allied leadership of Austria and Russia. The combination of mounted and standing poses gives a diorama base the structure of a parade, briefing, or pre-battle assembly rather than a generic troop grouping. The historical reference in the source material points to a moment before the Battle of Austerlitz in December 1805, when the Third Coalition faced Napoleon's Grande Armée. That setting gives the figures a precise place within early 19th century military displays and helps connect them with campaign-based layouts, staff scenes, and larger battlefield compositions. In 1:72 scale, the set fits naturally alongside other period troops, artillery, and cavalry used in the same modelling range. Painting sessions can focus on contrasting uniforms, mounted details, and the visual hierarchy between officers, rulers, and attendants. Once placed on a terrain base, the 39-piece group can anchor a headquarters vignette, a ceremonial review, or a wider historical arrangement built around the events of 1805. Age marking: 14 years  Warning! Not suitable for children under 14 years.

Italeri Austrian & Russian General Staff 1:72
Italeri Austrian Infantry 1798-1805 Model Kit

Model figures

Italeri Austrian Infantry 1798-1805 Model Kit

510006093

€10.49

The Italeri 1:72 Austrian Infantry 1798-1805 model kit brings a defined Napoleonic formation into scale form, centred on the troops that faced Napoleon's forces during the Marengo campaign of 14 June 1800. Its historical setting gives diorama builders and military model collectors a clear reference point for arranging battle scenes with period accuracy. The figures are presented with uniform elements taken from the era, including the typical short leather cap and a brass front plate bearing the imperial eagle. Some soldiers are also depicted with the 1798 helmet marked with Francis II's initials, a distinction associated here with Frei-Corps or Jager light infantry battalions. These variations help create a more nuanced formation instead of a single repeated look across the whole set. The 1:72 scale fits naturally into established military modelling layouts and allows the figures to combine with other scenery, artillery, and battlefield builds in the same scale. On the workbench, the detailed plastic parts invite careful trimming, assembly, and painting. Once finished, the figures suit regimented line-ups, campaign vignettes, and larger Napoleonic battle recreations where uniform differences and historical context shape the final scene. Age marking: 14 years and up.  Warning! Not suitable for children under 14 years.

Italeri Austrian Infantry 1798-1805 Model Kit
Italeri AV-8B Harrier II 1:72 Plastic Kit

Military aeroplane models

Italeri AV-8B Harrier II 1:72 Plastic Kit

510090193

€22.99

The Italeri AV-8B Harrier II 1:72 Plastic Kit brings a modern multirole aircraft into a compact build scale, combining the distinctive Harrier layout with a subject shaped by British and American aeronautical collaboration. As a detailed plastic kit, it focuses attention on the form and configuration of an aircraft developed for short takeoff and vertical landing operations. The AV-8B Harrier II marked a significant step beyond the first Harrier family aircraft. It was developed to operate from aircraft carriers without catapults, from amphibious assault ships, and from improvised landing strips, giving the original aircraft an unusually broad operating profile. That background gives the finished 1:72 model a strong real-world context rooted in naval and expeditionary aviation. The aircraft was widely employed by the United States Marine Corps, and its mission profile covered multirole attack and close air support duties across varied operational settings. On the bench, this aircraft subject suits builders who enjoy military aviation with a clear technical identity rather than a generic jet outline. Once assembled, the model fits naturally into displays focused on modern combat aircraft, carrier aviation, or Harrier family development. Minimum age: 14 years.  Warning! Not suitable for children under 14 years.

Italeri AV-8B Harrier II 1:72 Plastic Kit
Italeri AW-101 Merlin HM.1 Model Kit 1:72

Military helicopters

Italeri AW-101 Merlin HM.1 Model Kit 1:72

510001486

€27.99

The Italeri AW-101 Merlin HM.1 model kit in 1:72 scale brings a modern Royal Navy helicopter onto the workbench with a shape defined by its large fuselage, prominent cockpit glazing and distinctive naval equipment fit. The subject represents the AW-101 Merlin, a medium-heavy multirole helicopter developed by AgustaWestland in collaboration with Westland Helicopters for naval service. In full-scale service, the Merlin was introduced in the early 2000s to replace the SH-3D Sea King and took on anti-submarine warfare as its primary embarked role. Its operational profile also extends to troop transport, maritime search and rescue, and combat search and rescue, which gives the finished model a clear place within modern military aviation collections. The aircraft is powered by 3 turbines, reaches a maximum speed of 310 km/h and has an operational range exceeding 1,350 km. A super decals sheet for 3 versions supports different marking finishes on the completed helicopter. Figures are not included. On the bench, the 1:72 format suits careful painting, decal placement and weathering across the Merlin's broad surfaces, sensors and undercarriage details. Once completed, the AW-101 Merlin HM.1 sits naturally in a line-up of contemporary helicopters, naval aircraft or search-and-rescue subjects, with the CROWEST-marked Royal Navy appearance giving the build a strong service character.  Warning! Not suitable for children under 14 years.

Italeri AW-101 Merlin HM.1 Model Kit 1:72
Italeri B-17F Flying Fortress Model Kit 1:72

Model aircraft

Italeri B-17F Flying Fortress Model Kit 1:72

510001487

€39.99

The Italeri B-17F Flying Fortress model kit brings a landmark World War II aircraft into 1:72 scale, combining the unmistakable 4-engine heavy bomber layout with the long wing plan and fuselage form that defined the Boeing B-17 family. The B-17F variant represented a major step forward within the series and gives this build a strong historical identity on the workbench and in a finished display. In service with the United States Army Air Forces, the B-17 Flying Fortress was used extensively during World War II and became closely associated with daytime strategic bombing missions over the European front. The B-17F is described as offering extended operational range, a substantial offensive payload and defensive armament of 10 .50 caliber machine guns. Another defining characteristic of the full-size aircraft was its ability to return to base even after heavy structural damage, a trait that made the type especially respected among flight crews and helped secure its lasting place in aviation history. This 1:72 aircraft build suits focused assembly sessions, careful painting and historically minded presentation once completed. On a shelf, in a display cabinet or alongside other military aircraft in the same scale, the B-17F Flying Fortress stands out through its wartime role, recognisable silhouette and strong connection to the air campaign over Europe.

Italeri B-17F Flying Fortress Model Kit 1:72
Italeri B-52G Stratofortress Model Kit 1:72

Military aeroplane models

Italeri B-52G Stratofortress Model Kit 1:72

510001378

€74.99

Italeri B-52G Stratofortress brings one of the best-known long-range strategic bombers in aviation history into a detailed 1:72 assembly kit. With a finished length of 67.4 cm, the model has the physical presence to show the aircraft's long fuselage, swept wing layout and multi-engine configuration clearly on the workbench and in a display setting. This version represents the B-52G, the most produced variant of the Stratofortress family. The subject reflects the changes that defined the G version, including a strengthened structure, updated avionic systems, increased fuel capacity and the option to carry external fuel tanks for longer operational range. Super decal sheets provide 4 version choices, opening the way to different USAF serials, insignia and unit markings during the finishing stage. The included color instruction sheet helps guide camouflage placement and decal positioning across those alternative schemes. Assembly is specified at 600 minutes. The historical setting adds extra depth to the build, with markings linked to aircraft used in the early 1990s and a version that took part in Operation Desert Storm in 1991. That combination of large scale, variant-specific markings and Cold War to Gulf War context gives the finished aircraft a strong presence whether the focus is careful painting, decal work or a collection centered on military aviation history.

Italeri B-52G Stratofortress Model Kit 1:72
Italeri Bastogne Siege Battle Set Model Kit 1:72

Military figures & accessories

Italeri Bastogne Siege Battle Set Model Kit 1:72

510006186

€70.99

Italeri Bastogne Siege is a 1:72 battle set model kit built around one of the defining winter engagements of December 1944. The set brings infantry, armor and scenery into a single layout, making it possible to shape a snowbound battlefield with opposing forces, a damaged structure and route markers that echo the road-junction fighting around Bastogne. The kit contains 151 parts and centers the scene on 50 U.S. infantry figures, 36 German infantry figures, an M4A3E2 Jumbo and a Panther Ausf. G. A ruined house corner in laser-cut MDF introduces vertical structure and cover, while battlefield accessories such as obstacles, sandbags, crates, barrels, poles and signposts help break the ground plan into defensive positions and movement routes. The 2 armored vehicles are marked as Fast Assembly models, which keeps the focus on arranging the wider combat scene rather than on a vehicle-only build. Assembly is required, with a stated build time of 600 minutes. On a shelf, workbench or diorama base, the set supports a compact but layered recreation of the Bastogne siege, from street-edge fighting near damaged walls to armored movement past barricades and signs. The mixed contents also suit builders who want to paint winter uniforms, weathered armor and battlefield details within one coordinated WWII scene.  Warning! Not suitable for children under 14 years.

Italeri Bastogne Siege Battle Set Model Kit 1:72
Italeri Battle Set Sainte-Mere-Eglise 1:72

Military figures & accessories

Italeri Battle Set Sainte-Mere-Eglise 1:72

510006199

€74.99

Italeri Battle Set Sainte-Mere-Eglise 1:72 centers on the June 6, 1944 air assault in Normandy and turns that moment into a detailed WWII diorama build. The combination of the Sainte-Mere-Eglise Church, opposing troop groups and an Sd.Kfz. 251/1 Ausf. C gives the scene a strong focal point, with the road junction and church square shaping how the layout reads once assembled. The church is made from laser-cut MDF, which sets it apart from the figure frames and gives the town setting a distinct architectural core. Around it, 48 U.S. Paratroopers and 50 German Infantry allow broader scene composition than a small skirmish setup, with enough figures to spread action across entrances, walls and street edges. The 16 urban accessories add town details such as barriers, posts and street fixtures that help break up open ground and define positions. Decals add road signs, clock details and vehicle markings that sharpen the period look of the finished display. Assembly is required, and the stated assembly time is 600 minutes. Paints, tools and cement are required separately. Once completed, the set suits shelf display, historical scene building and tabletop layouts that focus on the Battle of Normandy through one specific location rather than a generic battlefield.

Italeri Battle Set Sainte-Mere-Eglise 1:72
Italeri Battlefield Accessories Model Kit 1:72

Military figures & accessories

Italeri Battlefield Accessories Model Kit 1:72

510006049

€9.49

Italeri Battlefield Accessories brings WWII diorama building into 1:72 scale with a scenery-focused assembly kit shaped around defensive field details and environmental structures. The set is built for model scenes that need more than a vehicle or figure alone, adding the visual language of barriers, trenches, poles, signs and storage pieces to a battlefield layout. The unassembled parts are arranged on sprues and include a mix of molded shapes suited to fortification and roadside scenery. Visible elements from the set include anti-tank obstacles, wooden barricade forms, a sandbagged defensive position, signposts, barrels, a crate and stacked stakes. This combination helps define routes, block passages and frame positions within a static display. The 600-minute assembly time points to a project with room for careful cutting, placement and finishing. At 1:72 scale, the accessories can be integrated into compact scenes while still giving enough variety to build layered terrain around military subjects. On a shelf, in a display case or as part of a larger historical setup, the kit supports scenes such as a defended roadside, a trench line or a fortified approach. Minimum age is 14 Years. Paints and further modelling equipment are required separately.  Warning! Not suitable for children under 14 years.

Italeri Battlefield Accessories Model Kit 1:72
Italeri Battlefield Accessories Model Kit 1:72

Model figures

Italeri Battlefield Accessories Model Kit 1:72

510006030

€14.99

Italeri Battlefield Accessories is a 1:72 assembly kit built to add structure, cover and terrain detail to historical military scenes. The set brings together fortification elements such as a wooden bridge, palisade sections, trench parts and defensive obstacles, so a diorama can move beyond open ground into a more defined battlefield layout. The 109-piece format gives room for different arrangements, with watchtower parts, gate sections, ramps, gabion-style baskets, barrels, shelters and wall details available for varied placement. These components support scenes around guarded crossings, defended camp edges and improvised front lines, while the mix of timber-style and brick-style surfaces gives painted finishes more contrast. Assembly is required, with a stated build time of 600 minutes. Paints, cement and tools are required separately. Once built, the accessories can frame troop positions, shape movement routes and break up larger terrain boards with vertical and low-profile cover. A bridge over a stream, a tower above palisades or trench sections linked by barriers can change how a 1:72 display reads from every angle. The kit is marked 14 Years+.

Italeri Battlefield Accessories Model Kit 1:72
Italeri Battlefield Buildings Model Kit 1:72

Military figures & accessories

Italeri Battlefield Buildings Model Kit 1:72

510006130

€9.49

Italeri Battlefield Buildings is a 1:72 model kit for building WWII scenery that gives military layouts a defined checkpoint, lookout and field support area. The set combines a tall watchtower, a sentry hut with boom barrier and a covered shelter, creating a compact group of structures that can frame roads, camp entrances or defensive positions with a more complete battlefield setting. The watchtower stands on a narrow 4-leg structure with cross-bracing and a ladder leading to the roofed platform, while the hut and barrier form a clear access point for convoy or perimeter scenes. Textured parts on the sprues reproduce plank surfaces, ground sections and structural panels that respond well to careful painting and weathering. Additional accessories such as sandbags, crates, rocks and stretcher-style pieces help break up open ground and support more layered placement around vehicles and figures. A decal sheet is included for the shelter and checkpoint markings, including a red cross emblem and striped graphics. With 600 minutes assembly time, the build suits modelmakers who want scenery that adds narrative around 1:72 vehicles and figures rather than another standalone machine. The finished structures can anchor a border post, aid station, depot entrance or observation point, giving static displays and tabletop scenes more context at the edges of the action.

Italeri Battlefield Buildings Model Kit 1:72
Italeri Bedford QL Truck 1:35 Scale Model Kit

Model tanks

Italeri Bedford QL Truck 1:35 Scale Model Kit

510000241

€36.99

Italeri Bedford QL Truck 1:35 Scale Model Kit brings a late-1930s British military transport vehicle into a detailed build with a clear wartime identity. The Bedford QL line was developed for the British Army as a more modern and flexible transport vehicle, and this kit focuses on that medium truck format in 1:35 scale for a display piece with strong historical character. Following testing in 1940 and distribution in early 1941, Bedford QL trucks served with Army Corps, Regiments and other units across multiple fronts. Their relatively low weight and 4-wheel-drive configuration supported logistical and transportation duties in demanding conditions, while the same platform was also used for towing artillery such as the 6 pounder anti-tank gun and the 40 mm Bofors anti-aircraft gun. The subject therefore offers more than a vehicle shape alone; it connects the build to transport, field support and towing roles within British wartime operations. The assembly kit is intended for ages 14+ and has a stated assembly time of 600 minutes, making it a substantial project with room for careful finishing work. Marking options for 3 versions add variety to the final result, with reference schemes linked to British units in Egypt and El Alamein in 1942. Figures are not included. Paints are required separately.

Italeri Bedford QL Truck 1:35 Scale Model Kit
Italeri Bergetiger 1:35 Support Vehicle Kit

Model tanks

Italeri Bergetiger 1:35 Support Vehicle Kit

510006764

€33.49

Italeri Bergetiger brings a rare armored recovery subject into 1:35 scale with a detailed plastic kit based on the modified Tiger I support vehicle. The model centers on the distinctive battlefield conversion in which the original tank lost its main gun and took on a crane for technical and logistical work around front-line armored units. The historical reference behind this version gives the build a very specific identity. Allied forces used the name Bergetiger for captured examples, following the same naming pattern seen on recovery vehicles derived from Panther and Panzer IV tanks. Contemporary accounts describe a machine that kept the Tiger I hull, tracks, and heavy armor while adding equipment intended for towing disabled tanks, lifting heavy components, carrying spare parts, and supporting repairs on other armored vehicles. No official production statistics are known, and the type is generally believed to have been assembled in small numbers by Wehrmacht field workshops at the front. That background gives the finished model a strong presence in military dioramas, workshop scenes, and vehicle lineups focused on support and recovery roles rather than direct combat. The 14 years age marking fits a build that rewards careful handling of a less common World War II vehicle subject and adds a distinctive variant to a 1:35 armor collection.

Italeri Bergetiger 1:35 Support Vehicle Kit
Italeri Bf 109 G-2/G-6 Aces Model Kit 1:72

Military aeroplane models

Italeri Bf 109 G-2/G-6 Aces Model Kit 1:72

510001483

€16.79

Italeri Bf 109 G-2/G-6 Aces brings one of the most famous fighter aircraft of the Second World War into a compact 1:72 scale model kit. The Messerschmitt Bf 109 monoplane fighter became a defining aircraft of the Luftwaffe, and this edition centres on the G-2 and G-6 versions associated with well-known aces. The subject carries strong historical weight beyond its outline alone. Throughout the war, the Bf 109 was repeatedly upgraded in engines and armament to remain competitive against newer aircraft with higher flight performance. Together with the Focke-Wulf Fw 190, it formed the backbone of German fighter units, giving this build a clear place within the wider story of wartime aviation. The Aces designation connects the model to pilots from Jagdgeschwader 52 and to Erich Hartmann, the highest-scoring ace of the Second World War named in the source data. On the bench, the 1:72 format keeps the project compact while still leaving room for careful painting and finishing. Once assembled, the aircraft sits naturally in a display cabinet, on a shelf, or alongside other historic aviation models, where the familiar Bf 109 silhouette and ace-focused presentation stand out clearly. Age 14+

Italeri Bf 109 G-2/G-6 Aces Model Kit 1:72
Italeri Bf 110 C-3/C-4 Zerstorer Model Kit 1:72

Military aeroplane models

Italeri Bf 110 C-3/C-4 Zerstorer Model Kit 1:72

510000049

€21.99

Italeri Bf 110 C-3/C-4 Zerstorer brings a well-known World War II twin-engine aircraft into 1:72 scale as an assembly kit shaped around the heavy fighter's long fuselage, twin tail layout and engine nacelles. The subject is based on the Messerschmitt Bf 110 in the C and C-4 variants, an aircraft used in roles that ranged from interceptor and fighter-bomber to reconnaissance, anti-ship missions and night fighting. The full-size aircraft was powered by 2 Daimler-Benz DB 601 engines rated at 1200 hp each and reached a maximum speed of 560 km/h, details that help define the proportions and mission profile of the model. Underwing external stores are part of the aircraft configuration, with bombs or additional fuel tanks used to extend operational range on the original machine. The kit is presented as a New Decals Edition and contains one model with a super decals sheet for 5 versions, giving the finishing stage a wider choice of codes, insignia and markings. Figures are not included. Assembly time is stated as 600 minutes. During the build, the 1:72 format keeps the project compact while still leaving room for painting, decal placement and careful finishing of the canopy, armament and undercarriage. On a shelf, desk or display cabinet, the completed Bf 110 C-3/C-4 stands out through its twin-engine silhouette and historically grounded configuration. Paints and tools are required separately.  Warning! Not suitable for children under 14 years.

Italeri Bf 110 C-3/C-4 Zerstorer Model Kit 1:72
Italeri Biber Midget Submarine Model Kit 1:35

Military ship models

Italeri Biber Midget Submarine Model Kit 1:35

510005609

€30.99

Italeri Biber Midget Submarine is a 1:35 assembly kit that recreates one of the most recognizable compact submarines used by the Kriegsmarine in the later years of World War II. With a finished length of about 186 mm, the model gives the narrow hull, raised conning tower and external weapon mounting layout enough room to stand out clearly on a shelf or in a naval diorama. The original Biber measured 9 m and was designed for a crew of 1, a combination that shaped its unusually small profile and focused mission role. Italeri carries that character into the build with the submarine's lean body, mast structures and the externally mounted torpedo arrangement that defined the type. Historical context adds depth to the finished model: development began in February 1944, the first units were launched 6 months later, and more than 300 Bibers were deployed before the end of the war. The real craft had a range of 240 km, a surfaced speed of 6.5 knots and a submerged speed of 5.3 knots. On the workbench, the kit suits builders who enjoy military naval subjects with a compact footprint and distinctive wartime markings. The included crew figures support dockside or underway presentation, while the alternate version options open up different paint and marking directions for a more individual result. Paints are required separately.

Italeri Biber Midget Submarine Model Kit 1:35
Italeri BMW R 75 with Side Car Model Kit 1:35

Model tanks

Italeri BMW R 75 with Side Car Model Kit 1:35

510000315

€11.99

The Italeri 1:35 BMW R 75 with Side Car assembly kit brings a historic military motorcycle into a compact display format, combining the distinctive sidecar layout with a finished model length of 6.6 cm. The subject represents the BMW R 75, a machine used in motorized units, and the sidecar-mounted MG 34 adds a clear mechanical focal point to the build. Beyond the motorcycle itself, the kit contains 3 figures that help shape a fuller scene around the vehicle. Their presence supports diorama planning with a stronger sense of movement, command or field transport rather than leaving the finished model as a standalone machine. The source subject also carries a recorded road speed of 92 km/h, a detail that underlines the fast dispatch role associated with this type of motorcycle. A decal for 1 version gives the finishing stage a defined marking option for the completed build. With a stated assembly time of 600 minutes, this model suits a slower, more deliberate build rhythm that leaves space for painting, fitting and display planning. On a shelf, in a cabinet or as part of a 1:35 military scene, the motorcycle, sidecar and figures create a compact composition with clear historical character. Age 14 Years+

Italeri BMW R 75 with Side Car Model Kit 1:35
Italeri Brick Walls Model Kit 1:35 Scale

Military figures & accessories

Italeri Brick Walls Model Kit 1:35 Scale

510000405

€9.49

Italeri Brick Walls brings a ruined masonry scene into 1:35 scale with an assembly kit built around miniature brick construction. The layout forms connected wall sections with uneven broken tops and a front opening, creating the look of a damaged building corner that gives a diorama immediate architectural structure. Instead of relying on one-piece cast scenery, the build uses small brick elements that are placed individually, so the wall texture develops course by course across corners, edges and openings. Loose bricks can be arranged at the base to extend the damaged setting into rubble and broken ground detail. This approach gives model makers control over how clean, collapsed or battle-worn the finished structure appears. The 600-minute assembly time points to a slower, detail-led project with room for careful alignment and surface finishing. The set is supplied as an assembly kit, and batteries are not included. On a display base, Brick Walls can frame military subjects, street scenes or standalone ruin studies with a more convincing sense of scale than a flat backdrop. The open wall sections leave sightlines through the structure, which helps when positioning vehicles, figures or debris around the finished build. Recommended age: 14 Years.

Italeri Brick Walls Model Kit 1:35 Scale
Italeri British & Prussian General Staff 1:72

Model figures

Italeri British & Prussian General Staff 1:72

510006065

€10.99

Italeri British & Prussian General Staff 1:72 brings a key Waterloo moment into model form with a scene centred on the meeting of the Duke of Wellington and the Prussian Marshal Von Blucher. The assembly kit focuses on allied command rather than front-line combat, making it a distinctive choice for Napoleonic collections and battlefield displays. Set within the Seventh Coalition formed after Napoleon's return from exile on Elba, the subject gives the finished build a precise historical frame. British and Prussian staff figures can anchor a command post, map briefing or battlefield overview in a 1:72 layout. The emphasis on officers and leadership figures adds variety beside infantry, cavalry and artillery units already arranged in the same scale. Assembly is required, and the stated assembly time is 600 minutes. The included component is the assembly kit. On a shelf, in a display case or as part of a wider Waterloo diorama, the scene adds a recognisable command narrative through period uniforms, mounted officers and the meeting of two allied commanders. It also suits painters and builders looking to expand a Napoleonic setup with figures that mark decision-making and coordination at the centre of the battlefield.

Italeri British & Prussian General Staff 1:72
Italeri British Artillery Model Kit 1:72 Scale

Model figures

Italeri British Artillery Model Kit 1:72 Scale

510006041

€10.99

Italeri British Artillery in 1:72 scale brings a Waterloo era gun crew into a compact model kit built around field artillery, uniformed soldiers and scene-based display potential. The assembly kit combines 4 guns, 48 parts and unpainted figures, creating a focused historical subject that suits shelf presentation, diorama work and careful finishing at the workbench. The Napoleonic Wars theme gives the set a clear setting, while the British artillery designation narrows the scene to a specific battlefield role rather than a general troop mix. Unpainted surfaces leave room for period colour schemes, shaded uniforms, gun carriage detailing and weathered ground effects chosen by the builder. The 1:72 scale also makes the set easy to place with other historical miniatures, terrain sections and military scenery from the same scale range. With assembly required and a stated build time of 600 minutes, the project offers time for test fitting, painting stages and deliberate arrangement of the finished crew around the artillery pieces. On a display base, the figures and cannons can be arranged to suggest loading, aiming or firing positions drawn from British field operations of the Waterloo period. The set also works as a compact addition to a wider Napoleonic collection, where artillery teams add structure, movement and historical context to infantry or battlefield layouts.

Italeri British Artillery Model Kit 1:72 Scale
Italeri British Heavy Cavalry Model Kit 1:72

Model figures

Italeri British Heavy Cavalry Model Kit 1:72

510006001

€10.99

Italeri British Heavy Cavalry Model Kit 1:72 brings a Napoleonic mounted unit into miniature form with 18 horsemen as an assembly kit. The scale gives battle scenes, display bases and historical arrangements a compact footprint while still leaving room for painted uniform detail, horse colours and formation spacing. The subject draws on British heavy cavalry from the Napoleonic Wars and connects the set to the charge of the Union Brigade at Waterloo under the Earl of Uxbridge. Regiments named in the source material include the Royals, the Scots Grey and the Inniskillings, giving the set a clear historical frame for painters and diorama builders. The unassembled parts format supports a step-by-step modelling process, from removing components from the sprue to fitting riders to horses and preparing surfaces for paint. The stated assembly time of 600 minutes marks this as a substantial bench project rather than a quick build. On a shelf, in a battle vignette or across a wargaming layout, the mounted figures can be arranged to suggest movement, charge formation and line-breaking action. The 14 Years marking fits the detailed handling that miniature assembly, painting and scene composition call for in a historical modelling set.

Italeri British Heavy Cavalry Model Kit 1:72
Italeri British Infantry 1815 Model Set 1:72

Model figures

Italeri British Infantry 1815 Model Set 1:72

510106095

€12.49

Italeri British Infantry 1815 brings a key Waterloo formation into 1:72 scale with 48 unassembled figures shaped for historical model scenes. The set draws on the British squares that resisted repeated cavalry attacks during the Napoleonic Wars, giving the finished formation a clear battlefield identity when arranged in ranks on a display base or diorama. The sculpted figures depict British infantry with period uniforms, tall shakos, Brown Bess flintlock muskets and fixed bayonets. Different poses visible on the sprues, including standing and kneeling riflemen, help break up repeated lines and support more natural unit placement across a scene. The reference to the 2nd Regiment Coldstream Guards ties the set to one of the best-known units at Waterloo and to the defense of Hougoumont farm. As an assembly kit, the figures arrive ready for removal from the sprue, cleanup, painting and placement, with an assembly time of 600 minutes. On a wargame table, the formation suits British line positions, defensive squares and farmstead actions from 1815. In a display cabinet, the 1:72 scale works well alongside other Napoleonic figures, artillery and terrain pieces to build a broader Waterloo setting with consistent proportions.

Italeri British Infantry 1815 Model Set 1:72
Italeri British Paratroopers Model Kit 1:72

Military figures & accessories

Italeri British Paratroopers Model Kit 1:72

510006034

€10.99

Italeri 1:72 British Paratroopers brings a WWII airborne unit into miniature form with 50 unpainted figures designed for assembly and finishing. The set draws on the British 1st Airborne Division, known as the Red Devils, and places the scene in Operation Market Garden in September 1944, where airborne troops were tasked with securing key bridges over the Rhine and the Meuse. On the bench, the tan sprues show repeated figures and equipment laid out for a full unit build rather than a single display piece. The 1:72 scale makes the figures suitable for military dioramas, battlefield layouts and integration with other scenery of the same scale. Poses visible across the set include standing riflemen, advancing soldiers, kneeling shooters and prone figures, which helps create movement across rubble, streets or bridge sections. Sculpted uniform features include camouflage smocks, netted helmets, chest pouches, belts, straps, boots and rifles, giving painters defined edges for colour separation and weathering work. The stated assembly time is 600 minutes, which reflects a project with room for careful preparation, painting and scene planning. Placed across a bridge approach, ruined street or defensive line, the figures can form a compact airborne section with a shared historical identity. The set also works as a source of 1:72 infantry for expanding larger WWII layouts where repeated troop types and coordinated poses matter.

Italeri British Paratroopers Model Kit 1:72
Italeri C-130 E/H Hercules Aircraft Kit 1:72

Military aeroplane models

Italeri C-130 E/H Hercules Aircraft Kit 1:72

510000015

€51.99

The Italeri C-130 E/H Hercules assembly kit recreates a landmark military transport aircraft in 1:72 scale, with a finished model length of 39 cm that gives the four-engine airframe real presence on the shelf. High-mounted wings, a tall tail and the broad fuselage shape capture the unmistakable outline of the Hercules in a format built for hands-on model making. The subject itself carries a long operational history, with the C-130 serving in many roles across more than 50 air forces. That background gives the build extra depth when working through the aircraft's structural layout, from the transport fuselage to the 4 propeller-driven engine positions. Decals for 5 versions add further finishing choice, supporting different markings and operator identities rather than a single fixed scheme. The kit is designed as an assembly project and the stated build time of 600 minutes reflects a more involved construction process. During the build, the large airframe gradually takes shape as fuselage sections, wing assemblies and tail components come together into a recognisable cargo plane silhouette. Once completed, the 39 cm format and 1:72 scale make the model well suited to display alongside other military aircraft builds. Cement, paints and tools are required separately.

Italeri C-130 E/H Hercules Aircraft Kit 1:72
Italeri C-130 J Hercules PRM 1:72 Model Kit

Military aeroplane models

Italeri C-130 J Hercules PRM 1:72 Model Kit

510001255

€52.99

The Italeri 1:72 C-130 J Hercules PRM Edition model kit brings the modernized Hercules transport aircraft into a detailed build with a finished model length of 41 cm. Its high-wing layout, broad fuselage and 4-engine configuration give the aircraft its unmistakable cargo-plane presence, whether placed on a shelf or worked through as a long-form assembly project. This version focuses on the extensively redesigned C-130J. The real aircraft uses 2 4700 HP Rolls-Royce Allison AE2100D3 engine systems driving 6-blade composite-material propellers, and that updated configuration shapes the character of the model. The subject also reflects the aircraft's revised avionics, with digital cockpit instruments and a Head-Up Display noted as part of the full-scale design. Decals for 3 versions allow different service markings and liveries to be applied to the same airframe, which changes the visual finish without changing the core structure. Assembly is required, and the stated assembly time is 600 minutes. The 1:72 scale suits builders who enjoy aircraft subjects with enough surface area for careful painting, weathering and decal work. On the bench, the transport fuselage, wing structure and engine arrangement create a build with clear stages; once completed, the long silhouette and military markings give the aircraft a distinct display presence.

Italeri C-130 J Hercules PRM 1:72 Model Kit
Italeri Cannone da 149/40 with Crew Model Kit

Military figures & accessories

Italeri Cannone da 149/40 with Crew Model Kit

510006165

€10.99

The Italeri Cannone da 149/40 with Crew model kit brings a World War II artillery subject into 1:72 scale with a long-barrel field gun and a full team of figures that give the scene immediate structure. The combination of cannon, crew and small battlefield accessories creates a compact display subject that reads clearly on a shelf or as part of a wider military layout. The gun is based on the Cannone da 149/40 mod. 1935 and uses the distinctive features of this artillery type, including the long barrel, large spoked wheels and split trail carriage. Alongside the cannon, the set provides 9 unpainted figures in different poses, allowing the finished scene to suggest loading, observation, command and gun handling rather than a static single-figure display. Small accessories such as ammunition pieces and crates add extra context around the emplacement. The parts are moulded for assembly as a classic scale kit, and the stated assembly time is 600 minutes. Paints are required separately. Once built, the set suits historical dioramas, cabinet display and focused painting sessions where figure uniforms, equipment and gun details can be finished with individual attention. The 1:72 scale also makes the completed cannon easy to place with other military miniatures, vehicles or terrain from the same period.

Italeri Cannone da 149/40 with Crew Model Kit
Italeri Cargo Trailer Model Kit 1:24 Scale

Model trucks

Italeri Cargo Trailer Model Kit 1:24 Scale

510003885

€61.99

The Italeri Cargo Trailer brings a latest-generation European semitrailer into 1:24 scale, with a finished model length of 58.0 cm that gives the build real presence on a shelf or in a road-haulage scene. Its long cargo body, rear door layout and tri-axle undercarriage capture the look of a full-size on-road trailer used in modern freight transport. The assembly kit is built around a detailed chassis and body structure, with separate panels, underbody parts, mudguards and wheel assemblies that shape the trailer step by step. New wheels add updated visual detail to the running gear, and the 8-tyre layout reinforces the heavy commercial character of the finished model. The included super decals sheet covers 2 versions, with DUSSOL Pere & Fils and MONJEAN Transporte liveries shown in the kit material, plus smaller markings such as plates, speed signs and technical labels that sharpen the scale finish. Assembly is required and the stated build time is 600 minutes. Paints are required separately. Marked for ages 14 years+, this model suits focused bench sessions where chassis work, body assembly and final finishing each have their own pace. Once completed, the 1:24 Cargo Trailer fits naturally into truck collections, transport dioramas and display lineups centered on European commercial vehicles.

Italeri Cargo Trailer Model Kit 1:24 Scale
Italeri Carrier Deck Section 1:72 Model Kit

Military aeroplane models

Italeri Carrier Deck Section 1:72 Model Kit

510001326

€28.99

Italeri Carrier Deck Section 1:72 Model Kit builds a modern aircraft carrier flight deck section with the visual tension of launch preparation built into the surface itself. The 40.5 x 23.5 cm format gives 1:72 naval aircraft a defined base for display, while the catapult area and deck layout create a clear operational setting instead of a plain stand. The moulded structure focuses on carrier-specific equipment. The catapult section can be positioned after checking the length of the selected aircraft, so the layout can be matched to different 1:72 carrier-based models. A Jet Blaster Deflector sits behind the launch position and is reproduced with hydraulic cylinders that show how the panel is raised and lowered on the real deck. The included decal sheet adds runway-style lines, warning striping, and deck markings that sharpen the finished look and help separate launch, handling, and edge areas across the surface. Figures and aircraft are not included. On a shelf, in a display case, or as the base for a photographed build, the deck section gives parked jets, launch-ready aircraft, and maintenance scenes a more convincing context. Assembly is required, with an indicated build time of 600 minutes. This kit is marked for ages 14+.

Italeri Carrier Deck Section 1:72 Model Kit
Italeri Carro Armato L6/40 Tank Model Kit 1:35

Model tanks

Italeri Carro Armato L6/40 Tank Model Kit 1:35

510096553

€34.99

The Carro Armato L6/40 from Italeri brings a compact Italian Second World War light tank into 1:35 scale, combining a focused build with the distinct proportions of a vehicle developed for reconnaissance and infantry support. Its small turret, low profile, and 2-man layout give the model a clear historical character on the bench and in a finished military display. The original Fiat L6/40 entered service in 1941 and was designed in the late 1930s, which places this subject in an early-war armored context with a very specific battlefield role. The commander also operated the cannon, a layout that shaped the real vehicle's internal arrangement and helps explain its compact form. Main armament on the full-size tank consisted of a 20 mm Breda 20/65 Mod. 1935 cannon mounted in the turret, paired with an 8 mm Breda 38 coaxial machine gun. That combination made the L6/40 suitable against light vehicles and lightly protected targets, while heavier armored opponents lay outside its strengths. The subject also opens several historically grounded display directions, since the L6/40 served in North Africa, the Balkans, and on the Eastern Front. A finished 1:35 build can therefore sit naturally in desert, urban, or winter diorama settings, or stand alone as a compact study of Italian wartime vehicle design. The age marking is 14 Years.  Warning! Not suitable for children under 14 years.

Italeri Carro Armato L6/40 Tank Model Kit 1:35
Italeri Carro Armato P40 Model Kit 1:35 Scale

Model tanks

Italeri Carro Armato P40 Model Kit 1:35 Scale

510006599

€36.99

Italeri Carro Armato P40 is a 1:35 scale military vehicle model kit that brings the late-war Italian heavy tank into a focused build with strong historical character. The finished subject combines inclined front armour, riveted construction and the long 75/34 Ansaldo gun, creating a silhouette that stands out in a display cabinet or diorama scene. The design reflects the P26/40 development path described in the source material, where Italian armoured vehicle engineering moved toward heavier protection and stronger firepower. A 420 HP diesel engine formed part of that full-size tank concept, and the model captures the external features tied to that shift, including the more modern hull geometry. At the same time, the build preserves period details such as riveted armour plates and the leaf spring suspension system, giving the subject its distinctive mid-war mechanical character. The kit also supports careful finishing work through alternate markings, with decals for 2 versions that allow different historical presentations of the same vehicle. With 600 minutes assembly time, this kit suits a slower bench session built around fitting, painting and final detailing. Paints, glue and tools are required separately. Once completed, the Carro Armato P40 fits naturally into WWII armour collections, historical dioramas and shelf displays where the angular turret, side skirts and tracked stance can be fully appreciated.

Italeri Carro Armato P40 Model Kit 1:35 Scale
Italeri Catalogue 2025 EN/IT reference edition

Catalogues & merchandise

Italeri Catalogue 2025 EN/IT reference edition

510009332

€2.99

Italeri Catalogue 2025 EN/IT is a printed reference edition that brings the 2025 Italeri range together in one bilingual catalogue. The EN/IT format combines English and Italian text, making the line-up easier to browse when comparing themes, checking range structure or noting specific releases across the year. As a catalogue rather than a model kit, this edition focuses on overview and orientation. It supports range planning by gathering current assortment information into a single source that can be kept at hand on a desk, beside a build area or with a collection archive. The 2025 designation anchors the content to a specific catalogue year, which helps when sorting line updates against earlier or later editions. The printed format also suits quick page-by-page comparison of categories and series without switching between separate listings. During collection planning, wish-list building or model research, the catalogue gives a straightforward way to review the Italeri assortment in one place. It can be used while comparing kit themes, checking what belongs to the current range or keeping a year-marked reference alongside existing catalogues. Minimum age 14 Years is stated in the product data.

Italeri Catalogue 2025 EN/IT reference edition
Italeri Catalogue 2026 EN/IT Int. Model Guide

Catalogues & merchandise

Italeri Catalogue 2026 EN/IT Int. Model Guide

510009339

€2.99

Italeri Catalogue 2026 EN/IT Int. brings the 2026 Italeri range together in a bilingual English and Italian catalogue that supports clear browsing, quick comparison, and easy reference during model planning. The printed format gives the line a structured overview that can be revisited at a desk, beside a workbench, or while sorting ideas for future builds. The EN/IT layout places 2 languages into one edition, which helps when checking names, ranges, and line details across different reading contexts. As a catalogue rather than a kit, this release focuses on reference use: flipping between pages, comparing entries, and keeping the 2026 assortment visible without switching screens or tabs. The 2026 designation anchors it to that specific annual line, making it useful as a dated overview for collectors who track releases by year. On a shelf in a hobby room, at a club table, or next to an ongoing project, the catalogue works as a compact source for range browsing and collection planning. Minimum age: 14 years. It suits moments when a printed reference is more practical than a digital search, especially for checking the wider Italeri line in one place.  Warning! Not suitable for children under 14 years.

Italeri Catalogue 2026 EN/IT Int. Model Guide
Italeri Catalogue 2026 EN/IT Reference Edition

Catalogues & merchandise

Italeri Catalogue 2026 EN/IT Reference Edition

510009341

€2.99

Italeri Catalogue 2026 EN/IT gathers the 2026 Italeri range into a bilingual printed reference with English and Italian text. The format supports quick browsing across model lines and accessories while keeping names and range structure together in one source. This edition is not a build set or a vehicle model; it is a catalogue created for checking the current line and comparing options before choosing a kit or accessory. The EN/IT layout helps when reading across 2 languages, and the 2026 designation places the contents within that specific catalogue year. For collectors, the catalogue can also work as a shelf reference for tracking releases shown in the range. The 14 Years age marking is stated in the product data. On a workbench, desk or bookshelf, the catalogue gives a straightforward way to scan the Italeri line before starting a new project. It also fits collection planning, range familiarisation and model selection when a printed overview is more practical than switching between separate listings.  Warning! Not suitable for children under 14 years.

Italeri Catalogue 2026 EN/IT Reference Edition
Italeri Char B1 Bis 1:56 Tank Model Kit

Model tanks

Italeri Char B1 Bis 1:56 Tank Model Kit

510025766

€21.99

Italeri Char B1 Bis in 1:56 scale brings the distinctive shape of the French Char de Bataille to the workbench as a detailed military vehicle model kit. The 12.1 cm finished length gives the tank a compact display size, while 85 parts provide enough structure for a rewarding build with visible track runs, turret detail and the front casemate layout that defined the original vehicle. The kit is designed with version choice in mind. Builders can assemble either a standard tank or a flamethrower version, and the marking sheet extends that flexibility with 6 finishing options. Cartograf decals supply names, numbers, crosses, roundels and unit insignia for French and German service variants, including Vercingetorix, Maginot and Gaston de Foix. The subject itself reflects the Char B1 bis configuration, known for its 47 mm turret cannon and 75 mm howitzer mounted in the front hull. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a diorama or alongside 1:56 gaming forces, the model carries the broad tracks, riveted surfaces and heavy silhouette associated with early Second World War armour. The included 3 figures add extra scene-building potential around the turret and hull, while the different version paths invite a finish that leans toward French 1940 service or later German conversions. Paints, glue and tools are required separately.  Warning! Not suitable for children under 14 years.

Italeri Char B1 Bis 1:56 Tank Model Kit
Italeri Chevrolet 15 CWT 1:35 Plastic Kit

Model tanks

Italeri Chevrolet 15 CWT 1:35 Plastic Kit

510000233

€30.99

The Italeri Chevrolet 15 CWT is a 1:35 scale plastic kit that captures the compact proportions and working character of a Commonwealth military truck. The finished subject combines a boxy cab, rugged running gear and a covered or open rear transport body, giving the build a strong period silhouette suited to historical vehicle collections. The kit is designed as a detailed assembly project and is marked 14 Years+. Sprue layouts shown in the set include separate chassis parts, body panels, cargo-bed components, clear parts and wheel elements, so the build develops through distinct structural stages rather than a single-piece shell. The subject is based on the Chevrolet 15 CWT, a four-wheel-drive vehicle used in military logistics and towing roles during World War II. A driver figure is not included. Paint guidance in the set references colours such as Flat Black, Flat Field Drab, Gloss Silver, Sand, Dark Green, Flat Rust and Rubber Black, supporting finishes that match the chosen scheme. The new decal sheet allows 3 historical versions: a Canadian Army vehicle in Normandy, July 1944, a British Army vehicle in Southern Italy, summer 1944, and an Australian Army vehicle at El Alamein, November 1942. Assembly kit contents are included. Assembly is required, with a stated assembly time of 600 minutes.  Warning! Not suitable for children under 14 years.

Italeri Chevrolet 15 CWT 1:35 Plastic Kit
Italeri Chinook HC.1 / CH-47D Model Kit 1:48

Military helicopters

Italeri Chinook HC.1 / CH-47D Model Kit 1:48

510002779

€57.99

Italeri Chinook HC.1 / CH-47D brings the distinctive tandem-rotor silhouette of Boeing's heavy-lift helicopter into a 1:48 scale assembly kit with a finished length of 34.0 cm. The long fuselage, raised front cockpit, tail rotor pylon and transport-helicopter layout give the completed aircraft a commanding presence in a military aviation collection. The subject draws on a helicopter family developed for transport duties and adopted in several versions by operators around the world. This kit focuses on the HC.1 / CH-47D configuration and uses upgraded moulds to reproduce the airframe with sharper structural detail across the fuselage and exterior surfaces. The decal content opens up 3 marking options, including service titles, serials, warning stencils and cockpit details that add scale depth beyond the main airframe parts. A 600-minute assembly time suits builders who enjoy a longer project with painting, marking placement and careful sub-assembly work across the cabin, undercarriage and rotor sections. On the bench, the model offers a steady sequence of cutting, fitting, cementing and finishing steps that reward patient work. Once completed, the 34.0 cm helicopter suits display alongside other 1:48 military aircraft or as a standalone centrepiece that highlights the Chinook's unmistakable twin-rotor form.

Italeri Chinook HC.1 / CH-47D Model Kit 1:48
420 of 1441 Items