Brands

Carson

Carson 1:10 Mega Duster Bundle

Product bundle consisting of: 1:10 Mega Duster 3.0 2.4G 100% RTR / 7,4V/2600mAh LiION batt. FE-Line XHP/TAM   Article number: 500404292 Product: 1:10 Mega Duster 3.0 2.4G 100% RTR Powerful racer for off-road action: The Carson FE Mega Duster 3.0 doesn't stop at any terrain! The independent suspension, full suspension and extremely grippy high-grip off-road tires make the vehicle ideal for unpaved terrain. The Mega Duster is ready to run and equipped with 1x 2.4 GHz remote control system, 2x Li-Ion drive battery (7.4 V/1500 mAh), 1x USB charger, 4x LR06 / AA transmitter batteries and detailed instructions. Fully charged and at full capacity, a full 25 minutes of driving time is possible. The LED lighting, digitally proportional control and waterproof RC components complete the overall package and make the model appear not only high-quality but also easy to handle. Under ideal conditions, the vehicle can reach top speeds of up to 30 km/h. Included: Fully assembled model, 2.4 GHz RC system, LiIon powerpack 7,4 V / 1500 mAh, charger, transmitter batteries, manual.     Article number: 500608307 Product: 7,4V/2600mAh LiION batt. FE-Line XHP/TAM Experience Maximum Power with Our 2600 mAh Li-Ion Tuning Battery! With 7.4 volts of output and a Tamiya connector, it delivers extended run time and is the perfect choice for the FE line. Get the performance boost you’ve been looking for – now!  

RC buggys

1:16 Tenzu, RC car, 4WD 100% RTR

€79.99

The 1:16 Tenzu brings compact off-road running together with 4WD traction and fully proportional control in a 300 mm format built for fast, precise inputs. Front and rear LED lighting adds a clear visual signature while the chassis works across rough ground, loose sections and mixed surfaces. A 390 brushed motor pushes the model to up to 30 km/h, giving the lightweight 825 g layout the pace to feel lively without losing control. Ball bearings support efficient drivetrain operation, and the 2-channel 2.4 GHz radio system reaches up to 75 m for stable command during wider runs. The 110 mm height keeps the body low over the suspension, while the double wishbone layout helps the wheels track uneven terrain with controlled movement. The coarse-tread off-road tires are matched to outdoor running where grip changes from patch to patch. As a 100% RTR model, the set includes the 2.4 GHz remote control system, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA batteries. The age marking is 14 years and up. Open ground, gravel paths and compact dirt sections suit the Tenzu especially well, where its proportional control, 4WD layout and illuminated bodywork come into their own during evening laps.  Warning! Not suitable for children under 14 years.

Models & trailers

1:12 MB Unimog U300 THW, RC truck, 100% RTR

€199.99

The Unimog line became known for compact dimensions, portal-axle capability and utility work across rough terrain, and that character carries into this 1:12 MB Unimog U300 THW RC truck. In blue THW livery, the model combines a 450 mm body length with a powerful electric motor, front LED lighting and a 2.4 GHz control system for controlled driving on paths, gravel and other uneven ground. Its 220 mm width and 260 mm height give the truck a tall, purposeful stance that suits the U300 shape, while the 2052 g weight adds substance in motion. The remote control handles steering and throttle proportionally, so small stick inputs translate into finer changes than simple on or off control. A separate horn function can be triggered from the transmitter, and motor sound control adds another layer to the driving scene. The 7.4 V 850 mAh Li-Ion drive battery is included, and the RTR setup also includes the 2.4 GHz transmitter, a USB charger and transmitter batteries. That combination suits first runs in the hobby as well as relaxed utility-style driving sessions with a scale vehicle theme. On compacted dirt, paving or loose gravel, the THW truck can be guided through tighter turns, short climbs and stop-start route changes while the illuminated front end keeps the model visually defined.

RC truggies & RC monster trucks

1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR

€124.99

The 1:10 Mega Duster 3.0 brings pick-up truck styling, LED lighting and a fully assembled RTR setup into a 430 mm off-road RC car built for rough ground. With independent suspension, coilover shocks and a fully suspended layout, the chassis is set up to absorb uneven surfaces while the multi-coloured printed body keeps the truck's desert-racer look clear in motion. Its 2.4 GHz radio system uses digital proportional control, so steering and throttle inputs can be fed in with fine adjustment rather than simple on-off commands. The included Li-Ion drive battery is rated at 7.4 V and 1500 mAh, and the USB charger is part of the set, along with 4 AA transmitter batteries. At 310 mm wide and 200 mm high, the truck carries a broad monster-truck footprint, while the stated weight of 1364 g supports a planted feel over gravel and dirt. Splash-proof electronics expand the running window when the surface is dusty or damp, and the stated driving time reaches up to 25 minutes. The Mega Duster 3.0 suits open ground, compacted trails and loose stone where the 115 mm all-terrain tires can work for grip and control. Age 14+ is stated for this model, and the fully assembled format gets the focus quickly onto driving lines, throttle control and off-road handling rather than workshop time.  Warning! Not suitable for children under 14 years.

RC speed boats

RC Yacht Hurikan, RC boat, 2.4 GHz RTR

€39.99

The Hurikan brings yacht styling and fast RC handling together in a compact 350 x 95 x 105 mm format built for lively water runs. Sand tones, white surfaces and dark window graphics give the hull a sharp, modern look, while the 2.4 GHz radio system keeps steering input responsive during laps across the lake. At 270 g, the model stays light in the hand for carrying to the shoreline, yet its twin-prop drive gives the boat the thrust needed for brisk acceleration on the water. Full driving functions cover forward, backward, left and right control, making tight turns and quick corrections easy to manage. The set includes a ready-to-run model, a 2.4 GHz remote control system, a USB charger, 2 x LR06 AA transmitter batteries and 2 spare propellers. The included 3.7 V 1200 mAh Li-Ion battery powers sessions of up to 40 minutes, and the drive engages only in water through the integrated shut-off circuit. That combination suits calm-lake outings, pond sessions and repeated practice runs where clean response matters as much as speed. Age 8+ marks the recommended age, and the complete RTR setup keeps the focus on steering lines, throttle control and fast passes across open water.

RC buggys

1:8 Drakuro BL 3S, RC car, 4WD RTR

€299.99

The 1:8 Drakuro BL 3S RTR brings brushless power, long-travel suspension and a wide 370 mm stance into one large-scale RC car built for fast off-road running. At 500 mm long, 330 mm high and 3402 g in weight, the chassis carries real presence on dirt tracks, gravel stretches and open ground, with a top speed of up to 65 km/h. A longitudinal aluminum reinforcement brace adds rigidity through the centre of the chassis, and reinforced steel drive shafts at the front and rear transfer power under load. The waterproof 30 kg steering servo uses metal gears for direct steering input, while splash-proof electronics and housing support running in changing conditions. Height-adjustable body mounts make it easier to set the shell position cleanly over the chassis, and LED lighting at the front, rear and roof keeps the model clearly defined when the light drops. The XT90 high-current connector system is designed for low-loss power transmission within the drive setup. The ready-to-run package includes a 2.4 GHz remote control and instructions, so the focus stays on driving rather than sourcing the core control gear. With 14 Years marked in the data, the Drakuro suits high-speed bashing sessions, repeated acceleration runs and broad off-road lines where suspension travel, steering force and chassis size all come into play.  Warning! Not suitable for children under 14 years.

RC yachts

Bella Luisa 2.4G, RC boat, 100% RTR

€69.99

Classic runabout styling meets radio-controlled action in the Bella Luisa 2.4G 100% RTR. The 455 mm motorboat combines a glossy wood-look finish, a clear curved windshield and chrome-look deck details with full steering control, creating a striking presence on ponds and small lakes. The hull measures 455 x 105 x 140 mm and weighs 648 g, giving the boat a slim, low profile on the water. Inside the set are a 2.4 GHz transmitter, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA transmitter batteries, so the model is fully assembled and ready for operation. The propeller drive reaches up to 10 km/h, while the water-activated motor start means the propeller engages only when the boat is on the surface. The detailed fairing and driver's cabin shape add to the leisure-boat look, and the cockpit area offers space for a play figure. On a calm garden pond, the responsive left-right and forward-reverse controls support neat manoeuvres along the bank or broad passes across open water. A driving time of up to 25 minutes leaves room for longer sessions before the battery returns to the USB charger.

RC speed boats

RC Fire Boat 2.4G, RC boat, 100% RTR

€119.99

The RC Fire Boat 2.4G 100% RTR brings firefighting action onto the water with a remotely operated water cannon, LED position lights and a sporty rescue-boat look. At 560 mm long, 147 mm wide and 215 mm high, the hull has a strong on-water presence, while the 2.4 GHz radio system keeps control stable across distances up to 100 m. The fully assembled boat is supplied as a ready-to-run set with a 7.2 V 1000 mAh NiMH drive battery, USB charger, 2.4 GHz remote control and 2 x AA transmitter batteries. Full driving functions cover forwards, backwards, left and right, so manoeuvres can be varied between straight sprints, tight turns and controlled repositioning for water-cannon play. A driving time of 45 minutes supports longer sessions before recharging, and the boat weight of 717 g keeps the format easy to handle between shore and water. Whether used on a pond, at the lakeside or on calm stretches of water, the fireboat combines radio-controlled driving with an extra action feature that changes how each run unfolds. Age 8 years+ marks the recommended age, and the included screwdriver supports the setup of the supplied components before the next launch.

RC aircraft

Stinger 2.0 2.4GHz 100% RTF, RC airplane

€49.99

The Stinger 2.0 2.4GHz 100% RTF brings a light 29 g airframe, intelligent gyro electronics and a ready-to-fly setup into one compact RC airplane built for controlled first flights and relaxed repeat sessions. With a length of 315 mm and a width of 385 mm, the model carries a broad wing layout that gives the aircraft a clear presence in the air while keeping the format easy to transport to open flying spaces. The Flexipor construction keeps weight low and supports the light handling that suits this class, while the 2.4 GHz control system allows clean command input without cable setup. A 3.7 V 300 mAh LiPo battery powers the airplane, and charging runs through the included USB charger. Spare rotor blades are included for continued use after routine wear, and the included 2x AA batteries complete the transmitter power supply. The gyro system works with the control inputs to calm the model in flight, which helps maintain a steadier line during climbs, gentle turns and landing approaches. Open ground, a sports field or another suitable flying area gives the 385 mm wingspan room to work through smooth passes and repeated take-offs. The ready-to-fly format keeps preparation focused on charging, switching on and heading into the next 20-minute flying session.

RC cars

1:10 Dustor, RC car, 2.4 GHz 100% RTR

€69.99

The 1:10 Dustor brings full-size RC presence to first runs and casual off-road sessions, with a 540 mm length, 300 mm width and 240 mm height that give the model a broad, planted stance on mixed surfaces. A brushed motor drives the 2WD rear-wheel-drive layout to speeds of up to 20 km/h, while the 2.4 GHz radio system reaches up to 75 m for clear control across open ground. Its fully assembled format keeps the focus on driving, and the included 7.4 V 500 mAh Li-Ion battery works with the USB charger for straightforward turnaround between sessions. At 985 g, the chassis stays light enough for responsive direction changes while still carrying the visual weight expected from a 1:10 off-road model. Front and rear impact protection support everyday running where gravel edges, kerbs and clipped markers are part of the route. The included transmitter is powered by 2 x LR06 AA batteries, so the full set is prepared for use without extra radio equipment. On asphalt, compacted paths or light terrain, the combination of suspension travel, rear-drive handling and off-road tires creates a controlled, approachable driving character. With up to 30 minutes of running time per charge, the Dustor suits park runs, open-yard driving and repeated practice laps where longer sessions matter.

RC cars

1:32 Deemon X, RC buggy, 100% RTR 2WD

€29.99

Compact scale and lively handling give the 1:32 Deemon X the feel of a true off-road RC buggy in a format built for quick runs at home or on small garden tracks. The 2WD layout, 2.4 GHz remote control system and selectable speed levels create a clear, responsive driving setup, while the elaborately printed body shell and switchable LED lighting keep the model visually sharp in motion. At 115 mm long, 86 mm wide and 53 mm high, the buggy fits neatly into tabletop courses, improvised obstacle lines and tighter turns where larger vehicles need more room. The 3.7 V 100 mAh LiPo drive battery supports up to 15 minutes of driving time, and recharging happens via the included USB charger. Included pylons and the jump ramp add concrete course elements for slalom sections, launch points and repeatable stunt practice rather than simple straight-line driving. The 69 g weight keeps the model nimble when changing direction, and the rubber tires give the chassis the grip needed for uneven surfaces. Short sessions on indoor floors, hallway tracks or paved garden paths suit the Deemon X especially well, whether the focus is clean cornering, quick acceleration bursts or ramp jumps. With 2 speed settings and a complete RTR package, the buggy moves easily between first RC laps and fast, compact course driving

RC helicopters

Eagle 280 Crash Stop, RC helicopter, 2.4G RTF

€44.99

The Eagle 280 Crash Stop brings compact RC helicopter flying together with a front crash-stop sensor that reacts to obstacles by stopping and backing the model away. At 200 mm long, 280 mm wide and 125 mm high, this 56 g coaxial helicopter suits controlled flights in tighter spaces as well as calm outdoor use. The 2.4 GHz control system gives the model its dedicated radio link, while the emergency stop button on the transmitter adds a direct way to cut the action when needed. A 3.7 V 250 mAh LiPo flight battery powers flights of up to 7 minutes, and the model reaches speeds of up to 25 km/h. The aluminium chassis gives the structure a firm core, and the coaxial rotor arrangement supports balanced lift for measured handling. Spare rotor blades are included, so the set is equipped for continued running after routine contact or wear. Indoor flights near walls, hallways or furniture benefit from the forward obstacle response, while open areas allow short hovering runs, lift-offs and landings with the same compact airframe. The ready-to-fly package includes the helicopter, remote control system, USB charger and transmitter batteries, so the set is prepared for flight after the first charging process.

RC truggies & RC monster trucks

1:12 NemeSys, RC car, 2.4 GHz 100% RTR

€129.99

The 1:12 NemeSys brings compact dimensions, 4WD traction and a lively off-road setup into one ready-to-run RC car. At 334 mm long, 233 mm wide and 140 mm high, the chassis combines a manageable footprint with the stance needed for rough ground, while the 2.4 GHz radio control keeps handling interference-free during each run. A 7.4 V Li-Ion drive battery with 1300 mAh supplies the Type 390 motor, and the aluminium heat sink supports the drive system when the pace rises. The model reaches up to 35 km/h and weighs 1020 g, giving the suspension and tyre setup a planted feel over changing surfaces. Adjustable aluminium shock absorbers let the running gear respond to ruts, gravel and uneven tracks, and the treaded tyres add bite where smooth rubber would lose grip. Integrated LED lighting on the bumper and roof adds a clear visual reference when the light drops, and the wheelie function brings an extra burst of character under strong acceleration. Splash-proof components support running sessions on dusty paths and damp ground, extending the range of places where the NemeSys can be driven. Driving time reaches 30 minutes. The set includes the fully assembled model, a 2.4 GHz remote control, a drive battery, a USB charger and 3 transmitter batteries, so the first outing can start with the supplied running gear and radio equipment.  Warning! Not suitable for children under 14 years.

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage, RC car

€17.99

The Aston Martin V12 Vantage brings British sports car character into a 1:60 Nano Racer format, combining licensed body styling with compact RC handling. At 79 mm long, 33 mm wide and 22 mm high, the black coupe keeps a low, planted look that suits short sprints across tables, smooth floors and small driving spaces. Its 2.4 GHz radio system gives the model a dependable link to the controller across 15 m, and the layout also allows up to 50 vehicles to run at the same time. That makes the small scale especially lively in group sessions, where several cars can share the same area without constant frequency conflicts. The ready-to-run setup keeps the focus on driving, while the included 1.2 V 80 mAh NiMH drive battery matches the compact chassis and the 25 g weight for quick, light movement. Charging runs directly through the remote control unit, so the car and controller work as one neat driving system. With a maximum driving time of 10 minutes, the Nano Racer suits short races, repeat laps and quick head-to-head runs. Age 4+ is stated in the product data. The included screwdriver supports battery access as part of the set contents, and the compact format makes the model easy to store between sessions.

RC models in 1:87 scale

1:87 MB 1620 Tarp Truck, RC truck, 100% RTR

€139.99

The 1:87 MB 1620 Tarp Truck with trailer brings moving road traffic into H0 railway scenes with compact dimensions of 187 x 28 x 38 mm and fully assembled 100% RTR equipment. Official Mercedes-Benz Trucks licensing, fine printwork and the blue finish give this RC truck a recognisable presence beside stations, freight depots and urban track sections. Its 2.4 GHz radio system supports interference-free control and allows several models to run at the same time, which suits busy diorama setups with more than one active vehicle. The very small turning radius helps the truck work through narrow streets, loading areas and switching zones where larger RC formats would look out of scale. The trailer extends the road-train silhouette and the removable tarp changes the look of the load area for different scene concepts. Included in the set are the ready-to-drive model, 2.4 GHz remote control system, Li-Ion drive battery 3.7 V / 75 mAh, 4 transmitter batteries LR03 / AAA, and instructions. On a layout, the truck can roll alongside trains, serve as a delivery vehicle near a goods shed or move through a city section with controlled speed changes and steering inputs. Collectors can also place it as a static display piece, with the integrated driver figure and licensed cab details carrying the scale effect even when the model is parked.

RC helicopters

Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF

€29.99

The Easy Tyrann 200 Boost IR brings compact indoor helicopter flying into a 100% RTF format with a 240 mm body, 200 mm rotor diameter and a 3-channel infrared control system. Its gyro-supported flight stabiliser helps keep the model composed in the air, while the switchable boost function adds an extra burst of power when the pace needs to change. A 3.7 V LiPo flight battery with 250 mAh capacity powers flight times of up to 9 minutes, and charging runs through the included USB charger. The transmitter also controls the color changing LED, so the light effect can be switched during flight rather than staying fixed. With a top speed of 15 km/h and a flight weight of 31 g, the helicopter stays light enough for controlled indoor use while still delivering lively movement. The ready-to-fly set includes the model, IR remote control system, LiPo flight battery, USB charger, 3x LR06/AAA transmitter batteries and spare rotor blades. Short hovering runs in a living room, careful turns along a hallway or repeated take-offs and landings on a smooth floor all suit the compact format. Age 8 Years+

RC tractors

1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer

€99.99

The DEUTZ-FAHR 8280 TTV brings the look of a modern farm tractor into 1:16 scale with a matching trailer, 2.4 GHz radio control and working sound functions. Engine sound, horn and LED front lighting create a more lifelike driving scene, whether the tractor is rolling across loose soil, garden paths or a carefully arranged display setup. At 750 mm long, 180 mm wide and 234 mm high, the model has a substantial footprint that suits towing and transport play. The rigid axle supports off-road running, while the steering is tuned for precise control and a small turning radius, helping the tractor change direction cleanly and guide the trailer through tighter spaces. The officially licensed DEUTZ-FAHR styling carries the 8280 TTV identity into the bodywork, giving the model a recognisable agricultural character. The accessible battery compartment under the hood allows quick battery changes between runs. Included are the ready-to-run tractor with trailer, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR03 AAA transmitter batteries. With a weight of 1731 g and a driving time of 90 minutes, the set is equipped for extended driving sessions focused on towing, positioning and farm-style transport action.

RC truggies & RC monster trucks

1:10 Torque Beast, RC car, 2.4 GHz RTR

€129.99

The 1:10 Torque Beast brings classic monster truck presence to RC driving with a 430 mm length, 310 mm width and 200 mm height that give the chassis a broad, purposeful footprint on rough ground. A solid bumper with integrated LED lighting adds a bright front-end detail, while water-resistant RC components and splash-proof electronics support running when the surface turns damp or dusty. At 1364 g, the model combines its size with a manageable overall weight that suits quick direction changes and repeated runs. The 7.4 V 1500 mAh Li-Ion drive battery is included, and the stated running time reaches 25 minutes before the pack heads back to the USB charger. The fully assembled RTR format keeps the focus on driving rather than setup, and the 2.4 GHz system supports stable control without the frequency crystals older RC systems required. Minimum age: 14 years. On gravel paths, compact dirt sections or uneven yard surfaces, the Torque Beast has the ground clearance and tire format to keep the run lively without losing control. Evening sessions gain extra character from the front LED lighting, and the included battery set means the truck is equipped for the first outing straight away.

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage RC car

€17.99

The Aston Martin V12 Vantage brings a well-known British sports car shape into a compact 1:60 Nano Racer format with radio control and a red body that stands out clearly on small driving layouts. Its officially licensed appearance follows the full-size model closely, while the 79 mm length, 33 mm width and 22 mm height keep the car suited to short straights, table-edge turns and quick direction changes in limited space. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The controller works on 2.4 GHz and reaches up to 15 m, giving the car enough room for indoor laps and compact obstacle courses. The same control system allows up to 50 vehicles to run simultaneously, which opens the door to group sessions without frequency clashes. With a weight of 25 g, the small chassis stays easy to handle between runs, and the battery delivers up to 10 minutes of driving time per charge. On a living room floor, a desk track or a small race setup, the Nano Racer format turns narrow spaces into usable circuits. Short driving sessions, quick charging through the controller and the compact footprint make this RC car a neat choice for spontaneous races, collecting and casual practice runs.

Mini RC cars

1:60 Nano Racer Fo.Must.Shelby GT500, RC car

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle-car presence, and this 1:60 Nano Racer translates that character into a compact RC format. With its licensed Ford design, red bodywork and stripe detailing, the small car brings a recognisable road-car silhouette to quick indoor driving sessions. The 2.4 GHz control system sends steering and throttle inputs over a range of 15 m, and it allows up to 50 vehicles to run simultaneously on the same frequency environment. Charging takes place through the remote control unit, which includes the charging connection for the 1.2 V 80 mAh NiMH drive battery. A full charge delivers up to 10 minutes of driving time. The ready-to-run format means the model, remote control with charging connection, NiMH drive battery, screwdriver and instructions are included. With dimensions of 79 x 33 x 22 mm and a weight of 25 g, the Nano Racer fits naturally into compact race setups where short straights, quick direction changes and close duels matter more than sheer size. The small scale also makes it easy to line up several cars for simultaneous runs, turning a table, hallway or smooth floor into a miniature racing scene with very little space required.

Mini RC cars

1:60 Nano Racer Fo.Must.ShelbyGT500, RC car

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle car presence, and this 1:60 Nano Racer translates that character into a compact RC format. At 79 mm long, 33 mm wide and 22 mm high, the miniature car stays small enough for quick driving sessions on tables, smooth floors or improvised indoor courses while still carrying the licensed Ford look. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The 2.4 GHz radio system gives the car responsive control and allows up to 50 vehicles to run simultaneously, which suits group races without frequency clashes. A 15 m control range leaves room for short sprints, turns and head-to-head runs, while the 25 g weight keeps the handling light and agile. The remote control also serves as the charging point, so the battery can be charged directly through the controller. With up to 10 minutes driving time, the Nano Racer fits quick race breaks, compact home circuits and repeated short sessions where several cars share the same space. The small footprint and simple control layout also make it easy to set up spontaneous races whenever a smooth surface is available.

RC models in 1:87 scale

1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz

€129.99

The Mercedes-Benz O 302 shaped coach travel across Europe for years, and this 1:87 RC bus brings that familiar silhouette into moving H0 scenes with licensed bodywork, raspberry red paintwork and front and rear LED lighting. At 112 mm long, 36 mm wide and 51 g in weight, the model sits naturally among buildings, platforms and road sections without overpowering the layout. Its 2WD rear-wheel drive works with a 2.4 GHz 3-channel radio system for controlled movement at up to 50 m, while the compact format helps the bus thread through tighter streets and station areas. The integrated 3.7 V Li-Ion battery with 75 mAh is built into the model, keeping the setup clean and the proportions true to scale. As a 100% RTR version, the set includes the remote control, the lithium drive battery, 4x AAA batteries, instructions and a storage case. The licensed Mercedes-Benz O 302 DB format gives the bus a recognisable road-going character that suits realistic transport scenes. On a model railway layout, the bus can roll between station forecourts, depot roads and town routes, adding controlled movement where static vehicles would otherwise remain fixed. The compact H0 scale format also suits shelf presentation between driving sessions, with the lighting and paintwork carrying the look of a classic DB bus into close-up display settings.

RC speed boats

Sea Ray 2.4 GHz, RC boat, 100% RTR

€54.99

The Sea Ray 2.4 GHz brings twin 380 brushed motors, a streamlined hull and RTR convenience together in a compact RC boat built for fast action on the water. At 395 mm long, 190 mm wide and 100 mm high, it cuts a neat profile across ponds and calm lakes, with LED lighting adding a clear visual accent as the hull moves through changing light. The fully assembled format keeps the focus on driving rather than setup, and the included 7.4 V 600 mAh Li-Ion battery supports up to 20 minutes of running time per charge. A charging time of 3 hours keeps the routine straightforward between sessions. The 2.4 GHz radio system is designed for 1 player control, while the water-protected receiver and battery box help keep key electronics covered from spray. A built-in shut-off means the motors only run in water, matching the boat's intended use with a clear functional safeguard. Its lightweight 349 g build makes carrying the model from bag to bank easy, and the compact shape sits comfortably in hand at launch and recovery. With 2 AA transmitter batteries included, the set is ready for immediate use in suitable water conditions, whether the plan is short speed runs, repeated passes along the shoreline or relaxed practice with steering and throttle control.

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 100% RTR 4WD

€199.99

The 1:10 XS Tekuro brings a fast off-road setup into a ready-to-run format, combining permanent 4WD, a high-torque 550 brushed motor and up to 40 km/h for lively runs across dirt, gravel and rough ground. At 410 mm long, 300 mm wide and 175 mm high, the chassis carries a broad monster-truck stance that suits uneven terrain and quick direction changes. Completely mounted on ball bearings, the drivetrain is built to reduce drag through the transmission, while metal differentials at the front and rear use steel bevel gears for direct power transfer under load. The XT60 high-voltage battery plug-in system supports a secure connection for the included 7.4 V 2600 mAh Li-Ion battery pack, and the quick-change battery holder keeps swaps straightforward between sessions. Weight comes in at 1741 g, giving the chassis enough mass to stay settled as the suspension works through bumps. The rear bumper integrates a wheelie bar that supports controlled lift when the motor loads up hard from a standing start. The scope of delivery includes the 100% RTR model, 2.4 GHz remote control system, 2600 mAh 7.4 V drive battery, 1 A USB charger, 4 LR06 AA transmitter batteries and a manual. Driving time is about 15 minutes, making the XS Tekuro a strong fit for park runs, compact off-road tracks and loose-surface sessions where quick setup and solid traction matter.  Warning! Not suitable for children under 14 years.

RC diggers

1:16 Volvo EC 160E, RC excavator, 100% RTR

€199.99

The Volvo EC 160E brings excavator handling into 1:16 scale with a ready-to-run RC setup, a true-to-original driver's cab and a working crawler layout built around 2 separately driven chains. With an operating weight of 2354 g and dimensions of 252 x 168 x 180 mm, the model carries a substantial presence while remaining manageable for controlled indoor driving and digging sessions. Its function package focuses on coordinated arm work rather than simple forward travel. The lifting arm and stick are made of plastic, and the spindle drive system moves the lifting arm, stick and bucket through deliberate, mechanical action that suits loading, lifting and placement tasks. The 2.4 GHz radio system supports single-user control, and the maximum operating time of up to 190 minutes allows longer work cycles before recharging. The included sheet metal shovel, scrap grab and excavator chisel shift the machine from earthmoving to gripping and breaking scenarios without changing the core vehicle. On a floor-based building site layout, the excavator can turn the uppercarriage through 360° to pick up, swing and place material within a compact work zone. The RTR package includes the model, remote control system, 7.4 V 1200 mAh Li-Ion drive battery, 3 LR06/AA transmitter batteries and instructions.  Warning! Not suitable for children under 14 years.

RC cars

1:24 Lamborghini Sian, RC car, 2.4GHz RTR

€24.99

The Lamborghini Sian brings super sports car styling into a compact 1:24 RC format, pairing a low, sharply shaped body with radio-controlled handling and a full ready-to-run setup. With a length of 195 mm, a width of 80 mm and a height of 49 mm, the model carries its proportions in a size that suits quick laps across smooth indoor surfaces. The 2.4 GHz remote control system supports stable command input during solo driving, while the 3.7 V Li-Ion drive battery with 500 mAh powers up to 60 minutes of ride time. At 172 g, the car stays light in hand and easy to place on the floor between runs. The included USB charger keeps the charging routine simple, and the set also contains 2 LR03 AAA transmitter batteries. A rear axle differential adds a mechanical detail that supports smoother cornering behaviour, while steering fine adjustment helps tune the driving line to the available space. LED lights at the front and rear keep the bodywork visible when the room gets darker and add extra presence during evening driving sessions. On a hallway course, around furniture legs or across a cleared living-room track, the compact dimensions, quick responses and detailed Lamborghini look create a focused RC session with a clear sports car character.

RC cars

1:24 Lamborghini Veneno, RC car, 100% RTR

€24.99

The Lamborghini Veneno brought extreme supercar styling to the road, and this 1:24 RC version carries that same low, angular character into compact driving sessions. As a fully assembled ready-to-run RC car, it combines a 2.4 GHz control system with a 195 mm body, 80 mm width and 49 mm height for quick laps across smooth indoor surfaces. The included Li-Ion drive battery delivers up to 60 minutes of driving time at full capacity, and the USB charger keeps the setup straightforward between runs. At 172 g, the model stays light in hand and responsive in motion, while the pistol-grip transmitter uses a steering wheel control and trigger throttle for familiar RC handling. Front and rear LED lights sharpen the car's presence when the room gets darker, and the underside trim dial marked for left and right steering correction helps align the tracking when the car pulls off line. The non-slip rubber tires support controlled acceleration and cleaner corner entry on short home circuits. Age 6 years and up is stated for the model. On a hallway course, around furniture or across a start-finish line marked out at home, the compact scale and agile response keep each run focused on timing, steering input and repeatable lines rather than sheer size.

Mini RC cars

1:32 VW Beetle Rally, RC car, 2.4 GHz RTR

The Volkswagen Beetle became one of the most recognisable car shapes ever built, and this 1:32 VW Beetle Rally translates that silhouette into a compact RC car with a rally-inspired stance. At 135 mm long, 85 mm wide and 85 mm high, the ready-to-run model combines agile handling with a size that suits quick driving sessions on smaller courses, tabletops or smooth ground. The 2.4 GHz radio system gives the car its control link, while the 273 g weight keeps the model light enough for nimble direction changes. The included remote control, drive battery and USB charger mean the main running components are already in the set, so the focus stays on driving rather than extra setup. A 3.7 V Li-Ion drive battery powers the car for up to 60 minutes of runtime, supporting longer sessions before the next charge. The Volkswagen licence adds the named vehicle identity from the original subject to the rally-themed body. Red LED underbody lighting stands out especially well in dimmer indoor spaces, where the glow adds movement and presence as the Beetle changes direction. Treaded tires help the car hold its line on mixed surfaces, making short sprints, looping turns and obstacle runs feel active and controlled. Age 6+

RC buggys

1:8 Akuma Buggy, RC car, 4WD RTR pink

€399.99

The 1:8 Akuma Buggy brings 4WD traction, brushless power and a bold pink body shell into a ready-to-run off-road setup built for fast runs on dirt, gravel and uneven ground. With a length of 505 mm, a width of 365 mm, a height of 220 mm and a weight of 3909 g, the chassis carries the broad stance and substantial footprint that suit buggy driving beyond smooth surfaces. A 100A drag-style ESC for 4S operation works with the 2050 Kv 3-pole brushless motor, while the cooling fan and aluminum motor heatsink support the electronics during hard acceleration. Steering input is handled by a 20 kg waterproof servo with metal gears, and the adjustable aluminum steering plate adds another tuning point at the front end. The XT90 high-current connector system and quick-change battery mount with Velcro strap keep battery swaps straightforward between runs. Splash-proof electronics and a 3-position adjustable rear spoiler round out a layout aimed at outdoor use. The included Expert Charger Twin LiPo USB-C charges two 7.4 V LiPo batteries simultaneously at 2A each, matching the supplied 2 x 7.4 V 3800 mAh drive packs. A 10 minute ride time suits short, fast sessions on compact tracks, open gravel areas or backyard jumps, with the color-printed body keeping the Akuma look clear at speed. Age 14+  Warning! Not suitable for children under 14 years.

RC buggys

1:8 Drakuro BL 3S 4WD RTR, RC car

€299.99

The 1:8 Drakuro BL 3S 4WD RTR brings brushless power, long-travel suspension, and a wide off-road stance into a ready-to-run RC car built for fast runs across mixed terrain. With a length of 500 mm, width of 370 mm, height of 330 mm, and weight of 3402 g, the chassis carries the planted footprint needed for high-speed driving and rough-surface control. A waterproof 30 kg steering servo with metal gears gives the front axle the force needed for direct steering inputs, while splash-proof electronics and housing support running where dust, spray, and loose dirt are part of the session. Steel differentials at the front and rear distribute drive through the drivetrain, and height-adjustable body mounts allow the shell position to be matched to the setup. The XT90 high-current connector system is designed for low-loss power transmission, supporting the demands of the brushless drive package under load. LED lighting at the front, rear, and roof keeps the body easy to track as conditions darken, and the rear bumper integrates a wheelie bar for hard launches under strong acceleration. The ready-to-run set includes a 2.4 GHz remote control and instructions. 14 Years marks the recommended age.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B 200/8, RC car, 100% RTR trailer

€114.99

The Mercedes-Benz /8 series shaped everyday road traffic in the late 1960s and 1970s, and this 1:87 M-B 200/8 captures that classic saloon presence in a compact RC format. The green body and matching trailer combine a recognisable road-car silhouette with radio-controlled movement, creating a small-scale setup that carries both collector appeal and active driving use. Its 1:87 scale makes the model easy to place on a desk, shelf, or layout, while the trailer adds a second element that changes the overall scene and gives the combination a more complete towing look. The 100% RTR specification means the driving package is prepared for immediate use, and 5 included batteries cover the initial power requirement stated in the data. With a minimum age marking of 14 years, the model sits in a hobby-focused range rather than a preschool toy segment. The compact format also suits short driving sessions where a larger RC vehicle would need more floor space. Whether used for careful indoor manoeuvres, as a small addition to a model collection, or as a road-car counterpart within a miniature vehicle lineup, the M-B 200/8 with trailer brings motion into a classic passenger-car theme. The combination of saloon and trailer gives the setup a distinct identity both at rest and in operation.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B Unimog U406, RC fire engine, RTR

€109.99

The Mercedes-Benz Unimog U406 has long been known for compact utility and all-terrain presence, and this 1:87 RC fire engine translates that character into a format built for close-quarters driving. Fine printing, high-quality paintwork and front and rear LED lighting give the body a convincing emergency-service appearance, while the very small turning circle suits narrow routes between scenery, tools or display pieces. The chassis uses 2WD rear-wheel drive and a brushed motor for controlled running, with fully proportional steering and acceleration allowing measured inputs instead of simple on-off commands. That control layout makes a visible difference on a desk, in a diorama or anywhere space is limited, because the model can be guided through tighter lines with cleaner corrections. The 2.4 GHz system supports stable operation, and the permanently installed 3.7 V 75 mAh Li-ion drive battery keeps the compact body free from bulky battery changes. Charging takes place via the transmitter and takes around 30 minutes. As a 100% RTR version, the set arrives with the remote control, the drive battery and the batteries required for the transmitter. Up to 60 minutes of driving time supports longer indoor sessions, whether the model is weaving through a small layout, tracing service routes across a tabletop or adding movement to a scale scene.

Military figures & accessories

Italeri Walls and Ruins Model Kit 1:72 Scale

€9.49

Italeri Walls and Ruins brings damaged architecture into a 1:72 model scene with ruined wall sections, rubble details and accessory parts that shape a convincing World War II setting. The assembly kit uses polystyrene components with moulded masonry surfaces, broken edges and openings that give the finished structure a worn, battle-marked look. Large wall pieces, lower broken panels and separate debris sections allow different layouts across a base, so the same set can frame a street corner, a shattered defensive line or the remains of a larger building. Sandbag elements introduce another layer of scene building, adding cover positions and visual contrast beside the stonework. Exposed brick textures and damaged contours create depth that stands out once painted and weathered. The 1:72 scale fits naturally with military miniatures, vehicles and historical displays built to the same proportion. On the workbench, the 600-minute assembly time supports a slower build with room for test fitting, painting stages and final placement of rubble and barricade details. In a finished diorama, the ruined sections can anchor a battlefield vignette, surround an armoured vehicle, or define the backdrop for infantry figures in a compact World War II display.

RC cars

Magic Machine 2.0, RC car, 2.4 GHz RTR

€49.99

The Magic Machine 2.0 brings a striking twist to RC driving with a body that changes function at the touch of a button. In one moment it runs as a flat racer, and in the next it shifts into an off-road configuration with more ground clearance, creating a fast change of character on asphalt, ramps and rougher sections. Its layout combines separately steered front and rear units with all-wheel drive, so both axles work together as the vehicle changes direction. That unusual steering concept gives the model its own driving feel and supports quick reactions when obstacles appear in the path. The body design also allows the machine to flip backward over obstacles, continue driving on its back and right itself again to keep moving. LED lighting adds another visible detail during use, while the contrasting top and bottom styling makes each rollover part of the visual effect rather than a stop in the action. With a length of 340 mm, a width of 215 mm and a height of 123 mm, the model has a compact footprint matched by a weight of 570 g. The included Li-Ion drive battery delivers up to 25 minutes of driving time and is paired with a USB charger. A 2.4 GHz remote control in a game controller style is included, along with 2 AA transmitter batteries, so the ready-to-run set is equipped for immediate use after charging.

RC yachts

Nano Racer Yacht 2.4G

€19.99

RC action on the water! With the Nano Racer Yacht, luxury RC fun on the water is realized. The ready-to-run yacht model delivers full driving fun right after unpacking and brief charging. It is controlled with a 2.4 GHz radio remote control and offers a range of up to 40 meters. Thanks to the safety shutdown, the propellers only work when the model is in contact with water. All RC components are water-resistant, making the yacht ideal for exciting action on the water. The set includes a LiPo battery and clear instructions for quick start-up. Compact, fast, and easy to control, the Nano Racer Yacht is a fun watercraft for hobby and play.

RC speed boats

XS Deep Sea Dragon, RC submarine, 100%RTR

€39.99

Compact RC submarines bring a different kind of model action, and the XS Deep Sea Dragon shifts that action below the surface. This 100%RTR RC submarine combines a compact orange hull, 3-channel 40 MHz control and blue LED illumination for visible manoeuvres in baths, pools and aquaria. The set includes the mini submarine with RC system, a 3.7 V 90 mAh Li-Ion drive battery, a USB charger, 2 transmitter batteries and instructions. Forward, backward, left and right steering are joined by dive and surface functions, so movement is not limited to a flat path across the water. The blue LEDs stay visible during operation and help keep the model in view while it changes depth. With up to 6 minutes of runtime, each charge suits short underwater runs with a clear start and finish. The USB charging cable can be stowed in the transmitter, so the charging lead stays with the control set between sessions. In use, the compact format suits smaller water spaces where tight turns and depth changes stay easy to follow. Age 8+ marks the recommended age. The submarine is intended for fresh water use in swimming pools, baths and aquaria; do not use in salt water.

RC truggies & RC monster trucks

1:10 Bokusa BL 2S 4WD RTR, RC car, yellow

€219.99

The 1:10 Bokusa BL 2S 4WD RTR brings brushless power and monster truck stance into a ready-to-run RC car built for fast off-road sessions. Its 455 x 312 x 180 mm format and 2165 g weight give the chassis a planted footprint, while the yellow body adds a bold trackside look. A 30 kg waterproof steering servo with metal gears handles steering input with firm control, and the fully ball bearing mounted transmission supports efficient running across the drivetrain. Metal differentials at the front and rear use steel bevel gears, adding a solid mechanical base for repeated acceleration and braking. The 2.4 GHz remote control system is included, and the radio system is water-protected for running in changing ground conditions. An XT90 high-voltage battery connector system and a quick-change battery mount keep battery swaps straightforward between sessions. With a stated runtime of up to 15 minutes, the model suits short, fast runs on dirt, gravel and uneven surfaces where suspension travel and tyre grip can be used fully. Age 14 Years. A battery is required separately.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 Bokusa BL 2S, RC car, 4WD RTR

€219.99

The 1:10 Bokusa BL 2S brings brushless power, 4WD traction and RTR convenience into a 455 mm off-road machine built for fast, dirt-focused running. With a width of 312 mm, a height of 180 mm and a weight of 2165 g, the chassis carries a broad, planted stance that suits rough ground and quick direction changes. Metal differentials at the front and rear use steel bevel gears to distribute drive across the axle line, while the fully ball bearing mounted transmission supports efficient running through the drivetrain. A 30 kg waterproof steering servo with metal gears gives the front end firm steering authority in wet or dusty conditions, and the water-protected 2.4 GHz remote control system keeps control input stable during outdoor sessions. The XT90 high-voltage battery connector system is paired with a quick-change battery mount, so battery swaps stay straightforward between runs. Age recommendation: 14 years and over. As an RTR model, the Bokusa BL 2S is set up for immediate driving once the required power source is added. Gravel tracks, compacted dirt and uneven open ground suit the suspension layout and tyre format especially well, while repeated acceleration runs benefit from the wheelie bar at the rear. Batteries are required separately.  Warning! Not suitable for children under 14 years.

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

€74.99

The 1:10 Cage Fighter brings desert buggy styling, radio-controlled handling and ready-to-run convenience into one fast-moving off-road setup. As a fully assembled RC buggy with 2.4 GHz control, it heads straight into dirt tracks, packed gravel and open ground with a low barrier to entry and a focused motorsport feel. Its full suspension supports precise steering response when the surface turns uneven, while the grippy off-road tyres help the buggy hold traction across changing terrain. Solid bumpers at the front and rear add protection in the zones that take the hardest knocks during close running. At 436 mm long, 234 mm wide and 147 mm high, the chassis has a planted footprint that suits outdoor driving, and the 806 g weight keeps the model agile in direction changes. The included Li-Ion drive battery runs at 7.4 V with 500 mAh capacity, and the set also includes a USB charger, a 2.4 GHz remote control and 2 x LR06/AA transmitter batteries. Top speeds of up to 18 km/h add a brisk pace without pushing the model beyond approachable control. Whether the route runs over compacted soil, short grass or rougher backyard ground, the Cage Fighter is built for active RC sessions rather than shelf display. Age 8+ marks the recommended age, and the 100% RTR format keeps the focus on charging the battery, taking the controller in hand and getting the buggy moving.

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

€74.99

The 1:10 Cage Fighter brings fast off-road RC action into a ready-to-run format with a fully assembled chassis, 2.4 GHz radio control and a 7.4 V 500 mAh Li-Ion drive battery. At 436 mm long, 234 mm wide and 147 mm high, the buggy cuts a planted stance as it charges over dirt, gravel and uneven ground. Its full suspension helps the wheels stay in contact with the surface, so steering inputs translate into cleaner direction changes instead of skittish bouncing. The 806 g vehicle weight supports an agile feel without losing presence on the track. Front and rear bumpers frame the chassis with added protection in the zones that meet obstacles first, which suits repeated running in tighter spaces and rougher outdoor sections. The included USB charger keeps the battery routine straightforward, and the supplied 2 x LR06 AA transmitter batteries complete the set. With a driving time of 25 minutes and speeds of up to 19 km/h, the Cage Fighter suits short backyard sessions, improvised dirt courses and casual head-to-head runs with other 2.4 GHz models. Age 8+ is stated for this RC buggy, making it a strong entry point into radio-controlled driving while still offering enough pace and control to stay engaging beyond the first outings.

RC truggies & RC monster trucks

1:10 Rodstar, RC car, 2.4 GHz 100% RTR

€129.99

The 1:10 Rodstar brings hot rod pick-up styling into an off-road RC format, pairing a multi-coloured printed body with a fully assembled ready-to-run layout. At 430 mm long, 310 mm wide and 200 mm high, the truck carries a broad, planted stance that suits gravel paths, compacted dirt and mixed ground. Its 1364 g weight works with the suspended chassis to give the model a settled feel as the wheels move over ruts and small impacts. A heavy-duty front bumper adds a solid visual edge and houses LED lighting that keeps the front end clearly defined in lower light. Splash-proof electronics support driving where damp patches, loose grit and changing ground conditions are part of the route. The included 2.4 GHz RC system gives radio control straight from the set, while the 7.4 V 1500 mAh Li-Ion power pack supplies up to 25 minutes running time per charge. The Rodstar suits quick sessions on open ground, repeated passes over rough surfaces and scale-style cruising with a custom hot rod look. USB charging keeps the drive battery easy to top up between runs, and the included transmitter batteries complete the package for immediate use.

RC cars

1:12 RaceRival Combo, RC car, 2.4G RTR

€59.99

The 1:12 RaceRival Combo brings 2 fully assembled RC cars into one set, creating instant side-by-side racing with matching 2.4 GHz radio control. Each model measures 304 mm in length and uses a 3.7 V Li-Ion drive battery with 500 mAh capacity, giving the pair a compact racing format with rechargeable power for repeated sessions. The set includes 2 remote controls, 2 Li-Ion drive batteries, 2 USB chargers and 4 AA transmitter batteries, so both vehicles are equipped for running from the start. A maximum driving time of 40 minutes keeps races going beyond a quick sprint and leaves room for repeated heats, overtaking attempts and back-to-back comparisons between the 2 cars. The pistol-grip transmitters use a trigger for throttle input and a side steering wheel layout familiar from hobby-grade RC driving. Steering fine adjustment on the vehicles helps correct the running direction when the track or surface calls for a more precise setup. Front LED lighting remains clearly visible as the cars move through indoor floors or paved outdoor sections, while the printed body shells give each model its own strong race-day presence. With an age marking of 8 years and up, the set suits shared racing sessions at home, quick duel formats in the driveway and casual practice laps where both cars can be charged, lined up and sent off again.

RC lorries & RC trucks

1:14 3-axle Material trailer, RC trailer

€699.99

At 1:14 scale, this 3-axle Material trailer brings the look and handling of a working cargo hauler into a detailed RC setup. The 981 mm long body combines a laser-cut steel frame in 3 mm and 1 mm sections with a real wooden floor application, creating a technical build with strong visual contrast between metal structure and load bed. The front wall is made from aluminium, while the rear bumper uses 8 mm aluminium for a solid, sharply defined finish. Left and right steel underride protection adds another authentic construction detail to the lower sides. The CNC-milled aluminium dropsides carry engraved surfaces and are built for active use rather than fixed display, with 9 functional panels, removable dropside posts, and 4 hinges on each dropside made from 1 mm steel. Neodymium magnets handle the locking, giving the side sections a tidy closing action without bulky external catches. Wide chromated wheels with ball bearings and wide tyres support smooth trailer movement, and the included suspension offers an optional 8 mm elevation for a different ride height. A steel spare wheel holder with spare wheel is fitted, and the finished trailer measures 981 x 195 x 210 mm with a weight of 6,900 g. Age 14+

RC cars

1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR

€54.99

The Lamborghini Murcielago SV translates the dramatic lines of the full-sized supercar into a 1:14 RC model with compact road presence and strong visual detail. At 330 mm long, 145 mm wide and 80 mm high, the body carries opening doors and a lifting hood that add hands-on interaction beyond pure driving. The detailed interior gives the cabin more depth when the body is viewed up close, while the front and rear LED system keeps the silhouette readable in lower light. A differential gear manages the drive effect between the wheels during turns, which helps the model hold a cleaner line through changing corners. Fully sprung suspension adds another mechanical layer, allowing the chassis to settle more evenly as the surface changes. The model weighs 631 g, giving it a planted feel in motion without losing the agile character expected from this scale. The fully assembled 100% RTR format keeps the focus on driving rather than setup, with a 2.4 GHz remote control unit included in the set. Also included are the 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR06 batteries. Driving time reaches up to 25 minutes, making the model well suited to repeated laps, short handling sessions and display breaks between runs.

RC lorries & RC trucks

1:20 MB Arocs Goldhofer, RC truck, 100% RTR

Heavy-haul transport is a defining part of construction logistics, and the 1:20 MB Arocs Goldhofer brings that role into RC form with a 1000 mm long truck and low loader combination. The fully assembled RTR set combines remote-controlled driving with functional trailer handling, creating a model that looks at home moving machinery between workshop shelf and jobsite scene. At 155 mm wide and 185 mm high, the model carries the long, low stance of a transporter, while the 1350 g weight gives the combination a substantial feel in hand. The installed reversing light works automatically together with the tractor unit, adding a realistic response during manoeuvres without needing a separate command. Included in the set are the ready-to-run model, a 2.4 GHz RC system, 2 x 4.8 V NiMH batteries, a USB charger and 2 x AA transmitter batteries. The 30 minute driving time supports extended loading runs, repositioning moves and repeated coupling sequences. Minimum age: 8 years. The low-bed layout suits transport scenes with construction machinery or other scale loads, and the remote-controlled ramp and support add movement beyond simple forward driving. On a floor layout, workshop setup or construction-themed display, the MB Arocs Goldhofer turns loading, uncoupling and trailer positioning into the central part of the action.

RC cars

1:24 Ford GT, RC car, 2.4 GHz RTR

€24.99

The Ford GT became one of the defining super sports car shapes of its era, and this 1:24 RC car brings that low, wide silhouette into a compact format built for quick laps and precise control. With a fully assembled ready-to-run setup, the model goes straight from charging to driving with the included 2.4 GHz remote control, Li-Ion drive battery, USB charger and transmitter batteries. At 195 mm long, 80 mm wide and 49 mm high, the body keeps the proportions of the road car clear while staying easy to handle on smaller indoor routes. The 172 g weight gives the chassis a light, agile feel in motion, and the fine-tuned steering supports accurate line changes through short straights and tighter bends. Front and rear LED lighting extends the visual effect beyond daylight conditions, while the licensed Ford design and realistic sports car look keep the model closely tied to its full-size inspiration. The 3.7 V drive system uses a 500 mAh Li-Ion battery and reaches up to 60 minutes of driving time at full capacity, making longer sessions possible without frequent charging breaks. Non-slip rubber tires work with the rear differential to maintain traction and stable handling as the car accelerates, turns and settles into repeated circuit runs. Age 6+ marks the recommended age, and the complete RTR format suits first RC laps as well as relaxed driving sessions for motorsport fans.

RC cars

1:24 Lamborghini Murcielago SV, RC car, 2.4GHz

€24.99

The Lamborghini Murcielago SV brought sharp-edged supercar drama to the road, and this 1:24 RC version translates that character into a compact model with full driving control. At 195 mm long, 80 mm wide and 49 mm high, the ready-to-run car combines a detailed sports car silhouette with a 2.4 GHz remote control system for responsive runs around living rooms, hallways and home tracks. A 3.7 V 500 mAh Li-Ion drive battery powers up to 60 minutes of driving time, and the included USB charger keeps the setup straightforward between sessions. The fully assembled format gets the focus onto driving rather than setup, while the 172 g weight keeps the model light in hand when moving from shelf to floor. Front and rear LED lighting extends the visual effect into dimmer conditions, giving the body lines and rear spoiler extra presence once the room lights drop. The remote control system is designed for interference-free operation, which helps when several 2.4 GHz vehicles are in use nearby. Short sprints down a corridor, tighter turns around chair legs or repeated laps on a small practice layout all suit the compact footprint. Age 6+ is stated in the product data, and the complete set includes the car, remote control, drive battery, USB charger and transmitter batteries for a quick start to the next run.

Mini RC cars

1:50 Nano City Dump Truck, RC truck, 2.4 GHz

€18.99

Construction trucks have long shaped city streets and building sites with their compact strength and unmistakable working profile. The 1:50 Nano City Dump Truck brings that familiar form into a small RC format with a true-to-original design, a detailed driver's cab and a ready-to-run setup for immediate use. Its fully assembled layout keeps the focus on driving, while the 146 g weight and 135 mm length create a handy format for controlled manoeuvres on tables, floors or improvised indoor routes. The open dump body gives the model its recognisable utility-truck silhouette, and the non-slip rubber tires provide the grip needed for cleaner starts, tighter turns and steadier movement on smooth surfaces. The 2-channel 2.4 GHz radio system supports interference-free control, which is especially useful when several radio-controlled models are active nearby. LED lighting adds another working-vehicle detail and makes the truck easier to track when the route runs through dimmer corners. Included in the set are the ready-to-run model, a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery, a USB charger and instructions. With up to 40 minutes of travel time, the compact dump truck suits quick driving sessions, small construction-themed layouts and repeated laps through indoor obstacle courses.

RC buggys

1:8 Akuma Buggy, RC car, 4WD 100% RTR

€399.99

The 1:8 Akuma Buggy brings large-scale off-road driving into a 505 x 365 x 220 mm format with a 4WD layout, a 2050 Kv 3-pole brushless motor and a 100A 4S drag-style ESC with cooling fan. The colour-printed body, 3-position adjustable rear spoiler and 17 mm aluminium wheel hexes give the buggy a focused racing stance before the first full-throttle pass. A 3 mm aluminium chassis plate forms the base for the drivetrain, while the aluminium motor heatsink supports cooling during hard acceleration. The steering system uses an adjustable aluminium steering plate, and the 20 kg metal-gear servo translates radio input into direct front-wheel response. Aggressive off-road tyres with foam inserts are glued in place for consistent running, and the hardened steel drive shafts connect the powertrain under load. The included 2.4 GHz RC system, 2 x 7.4 V 3800 mAh LiPo drive batteries, charger and 4 x LR06 AA transmitter batteries make the set ready to drive straight after charging. Driving time reaches 10 minutes, and the buggy weighs 3909 g. Forest tracks, compacted dirt and rough open ground suit the Akuma Buggy especially well, where the suspension travel and 4WD drivetrain can be used to carry speed through loose sections. The large 1:8 format also gives the chassis and electronics layout clear presence on the bench between charging sessions and setup checks.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B Unimog U406, RC truck, 100% RTR

€114.99

The Mercedes-Benz Unimog U406 has long stood for compact utility vehicle engineering, and this 1:87 RC version carries that character into a small-format driving model with a matching trailer. In bright orange with detailed paintwork and precise printing, the Unimog combines a true-to-original look with compact radio-control technology for controlled runs across a desk layout, a diorama road or a small indoor course. The 2.4 GHz remote control is part of the 100% RTR setup, so the model arrives with the core driving equipment already matched to the vehicle. Front and rear LEDs work alongside the switchable warning light to sharpen the service-vehicle appearance during operation. Steering trim on the transmitter helps fine-tune straight running, which is especially useful at 1:87 scale where small corrections show clearly. The permanently installed Li-Ion battery is rated at 3.7 V and 75 mAh, and the set also includes the required transmitter batteries plus a storage case for transport and tidy shelf keeping. The trailer broadens the operating scene beyond simple laps, with a tilting bed and removable tarpaulin that suit loading and unloading setups in miniature worksite or farm-style layouts. With age recommendation 14 years and up, the model fits hobby sessions focused on compact manoeuvres, display layouts and detailed vehicle handling in limited space.

RC models in 1:87 scale

1:87 MB 1620 flatbed truck, RC model, RTR

€129.99

The 1:87 MB 1620 flatbed truck with trailer brings compact RC control into H0 railway scenes with a fully assembled 100% RTR setup and finely scaled proportions. At 187 mm in length, the model is sized for dioramas and model railroad layouts where precise movement, lighting and sound add life to streets, depots and loading areas. A 2.4 GHz remote control system handles steering, speed and the switchable engine sound, while the integrated 3.7 V 75 mAh Li-Ion drive battery recharges through the transmitter in about 45 minutes. Front and rear LED lighting supports realistic operation in dimmer layout settings, and the very small turning circle helps the truck work through narrow routes and confined manoeuvring zones. The detailed body uses high-quality plastic construction with fine printing, and the removable tarpaulin changes the look of the trailer for different scene setups. A driver figure adds another scale detail for display, and the included trailer extends the vehicle's presence in transport scenes. With up to 60 minutes of operating time, the model suits longer running sessions on H0 layouts, from careful reversing at a loading bay to steady road movement between buildings and trackside structures.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Mercedes Benz 200/8 Taxi, RC car, RTR

€109.99

The Mercedes Benz 200/8 shaped the look of everyday saloons in the late 1960s and 1970s, and this 1:87 RC car brings that familiar taxi silhouette into a compact radio-controlled format. The small scale and RTR layout combine classic road-car character with immediate driving action on desks, display areas, or smooth indoor surfaces. Its 100% RTR specification means the key running setup is already part of the set, keeping the focus on steering inputs and controlled movement rather than sourcing core equipment first. The included 5 batteries support a ready-to-start configuration straight from the pack. With a recommended age of 14 years, the handling and scale suit enthusiasts who enjoy compact vehicle models with a recognisable real-world subject. The taxi styling gives the body a distinct period look that stands apart from modern racing or off-road themes. Between short driving sessions, the 1:87 format also makes the model easy to place in a collection of miniature road vehicles. It works well as a small RC model for indoor runs, as a conversation piece on a shelf, or as a classic Mercedes Benz subject in a compact hobby lineup.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Mercedes Benz 200/8, RC car, 100% RTR

€109.99

The Mercedes-Benz /8 series shaped everyday motoring in the late 1960s and 1970s, and this 1:87 Carson model captures that familiar saloon silhouette in a compact radio-controlled format. Finished in blue and supplied as a 100% RTR version, the miniature is set up for immediate use with 5 batteries included. Its 1:87 scale gives the model a notably small footprint, making controlled runs possible in spaces where larger RC cars would feel oversized. The classic 200/8 body shape brings a recognisable road-car character to each manoeuvre, while the compact format invites careful steering, short direction changes and neat placement on smooth indoor surfaces. With batteries already part of the set, the focus stays on the driving session itself rather than on sourcing the basic power supply first. Between runs, the blue finish and saloon proportions also make the model easy to place on a desk or shelf as part of a collection of compact vehicles. The combination of RTR convenience, included batteries and 1:87 scale makes this Mercedes Benz 200/8 a concise entry into small-format RC driving for hobbyists aged 14 years and up.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Bus Van, RC car, car trailer

€114.99

The VW T1 became one of the most recognisable light commercial vehicles of the 1950s, and this 1:87 RC version brings that silhouette into a compact driving format with a matching car trailer. At 115 mm long, 28 mm wide and 21 mm high, the ready-to-run model fits neatly into small layouts while still carrying the bus profile, printed finish and illuminated front and rear lighting. The 2.4 GHz radio system gives stable control for 1-player operation, and the fully proportional setup allows measured inputs instead of simple on-off movement. With a weight of 18 g, the model stays light in hand and easy to place on shelves or in model scenes between runs. The included Li-Ion drive battery is rated at 3.7 V and 75 mAh, while 4 LR03 AAA transmitter batteries are also included in the set. Steering trim supports precise correction when the bus tracks slightly left or right, which is especially useful on narrow routes where the small turning circle can be used to full effect. The display case adds a clean way to store the bus and trailer between sessions or present them as part of a collection. On a desk, shelf layout or compact indoor course, the combination of trailer detail, proportional control and long 50-minute runtime creates a focused micro RC driving session with a strong model-railway scale presence.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Pritsche, RC car, green trailer

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 RC version captures that familiar silhouette in a compact format with a green car trailer behind it. The radio-controlled layout turns the classic VW T1 Pritsche into a moving scale model that combines display character with active handling on a small footprint. Its 1:87 scale makes the model easy to place on layouts, shelves, or desks where larger vehicles would need far more room, while the trailer adds a second visual element that extends the transporter theme beyond the cab itself. The green finish gives the combination a clear, period-inspired presence, and the Pritsche body style keeps the utility look of the original vehicle at the centre of the design. As a powered ground vehicle, it brings motion to a format often chosen for static collecting, which changes how the model can be used between display moments and controlled runs. 5 batteries are included. The age marking is 14 Years. The compact dimensions implied by 1:87 scale suit short driving sessions on smooth indoor surfaces, model layouts, or table-based scenes where precise movement matters more than outright speed. It also fits neatly into collections built around classic transport themes, especially where a trailer combination adds extra visual interest without taking over the whole scene.

RC models in 1:87 scale

1:87 VW T1 SambaBus, RC car, 2.4GHz RTR

€114.99

The VW T1 SambaBus with trailer brings classic touring style into compact RC form at 1:87 scale. The ready-assembled set pairs the iconic bus silhouette with a matching caravan, while front and rear LED lights add visible presence during each run. A 2.4 GHz remote control system handles the model with fully proportional inputs, so throttle and steering respond in fine steps rather than simple on or off commands. Steering trim helps keep the vehicle tracking cleanly, especially on narrow routes and detailed miniature layouts. The 3.7 V 75 mAh Li-Ion drive battery supplies the power, and the transmitter also serves as the charging connection with a 60 minute charge time. The compact format and very small turning radius suit controlled driving in limited space where broader models would need more room. The combination of SambaBus and caravan creates a distinctive road-trip scene for shelf display, diorama use or active driving sessions. Included in the set are the ready-to-run model, the 2.4 GHz remote control system, the Li-Ion drive battery and 4 AAA transmitter batteries, so the model is equipped for use straight from the set.  Warning! Not suitable for children under 14 years.

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a nimble 125 mm x 135 mm format with a 150 mm diameter and a 45 mm rotor diameter. A button-triggered 360° flip function adds fast aerial action, while the Coming Home function returns the quadcopter to its home point at the touch of a button, creating a clear, easy rhythm between short flights and recovery. Its 3.7 V/600 mAh LiPo flight battery supports up to 8 minutes of flight time, and the 50 g ascent weight keeps the model light in the air. The IR control concept is paired with 3 speed settings, so the handling can stay measured for early practice or become more lively for tighter reactions. Blue LED lighting adds clear visual orientation once the quadcopter lifts off, especially when the frame is moving quickly through flips, turns and short climbs. The green finish gives the model a bright, high-contrast look in motion. Short sessions in the living room, open indoor areas or calm practice runs with repeated take-offs and landings all suit this ready-to-fly setup. Included contents are the ready-to-fly model, IR remote control, LiPo flight battery 3.7 V/600 mAh, USB charger and instruction manual.

RC quadcopters

Cyber Drone Polizei, quadcopter, 2.4G RTF

€34.99

The Cyber Drone Polizei 2.4G 100% RTF brings compact quadcopter flying into a ready-to-fly format with a 2.4 GHz remote control, a 3.7 V 600 mAh LiPo battery and a USB charger. With a length of 125 mm, a width of 135 mm, a diameter of 150 mm and a rotor diameter of 45 mm, the layout stays light at 50 g ascent weight and suits quick take-offs in smaller open spaces. Its control setup combines several functions that shape how the model behaves in the air. The 8 minute flight time supports short, focused rounds, while the included transmitter power uses 3 AAA batteries. The headless mode changes orientation handling by referencing the control direction rather than the nose position, which helps keep steering inputs easier to read during turns. Trim adjustment for left and right flight allows finer correction when the quadcopter drifts off line. Blue and red flashing LEDs remain easy to spot once the model lifts away from the launch point. Ready-to-fly equipment keeps the set focused on getting airborne with minimal preparation, whether the session starts on a driveway, in a yard or across a calm section of park ground. The compact dimensions, return function and selectable speed levels make it easy to alternate between steady hovering, directional practice and quick stunt passes in the same outing.

Model tanks

DUKW Amphibious Truck Model Kit 1:72 Scale

€15.99

The Italeri 1:72 DUKW Amphibious truck model kit brings a historic military transport into a compact build with the unmistakable shape of its amphibious hull and 6x6 layout. At about 117 mm in length, the finished model fits neatly into display cabinets, convoy scenes or beach landing dioramas while still leaving room for painted detail across the cab, cargo area and hull sides. The full-size DUKW was developed from the General Motor CCKW-353 2 1/2 t tactical transport truck to move loads quickly from ships to beaches during landing operations. Its 4,400 cm3 6-cylinder engine, three differentials and six driving wheels formed the mechanical basis, while the welded hull with horizontal rib reinforcement gave the vehicle its amphibious role. This kit translates that distinctive combination into a detailed plastic build that invites careful assembly, painting and finishing. Decals for 1 version are included to add markings once construction is complete. The subject suits historically focused model collections and WWII scene building, especially where transport vehicles add context beyond tanks and artillery. Assembly is required and the stated assembly time is 600 minutes. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

RC helicopters

Easy Tyrann 280, RC helicopter, 2.4 GHz RTF

€39.99

The Easy Tyrann 280 brings coaxial helicopter flying into a compact 280 x 200 x 125 mm format with a ready-to-fly setup, a 2.4 GHz control system and a top speed of 25 km/h. Its blue and black body, landing skids and illuminated nose give the model a clear presence as it lifts off for first hovering attempts in the living room or on a calm patio. Integrated gyro electronics support steadier flight characteristics, while the aluminium tail boom adds structure to the rear section during directional control. Left and right trim can be adjusted from the transmitter to correct the flight path in the air rather than interrupting a session. The switchable LED position indicators help keep orientation visible when the helicopter turns or moves further from the starting point. A 3.7 V 250 mAh LiPo flight battery powers runs of up to 8 minutes, and the included USB charger handles recharging between flights. The set also includes 3 x AAA transmitter batteries, so the model arrives with the key operating components in the box. This RC helicopter fits short practice sessions, from learning stable hovering indoors to controlled passes in light outdoor conditions. With 12 Years as the stated age marking and 1-player operation, the Easy Tyrann 280 suits focused solo flying where control inputs, trim changes and throttle feel can be learned step by step.

Model figures

French Warriors Model Kit 1:72 Hundred Years War

€10.99

Italeri French Warriors brings the Hundred Years War into 1:72 scale with a historical figure assembly kit built around cavalry and infantry. The set contains 28 unpainted figures in total, made up of 20 soldiers, 8 knights and 8 horses, creating a strong base for medieval battle lines, mounted charges or courtly escort scenes. The unpainted finish keeps every shield, surcoat and horse covering ready for individual colour work, whether the aim is a restrained campaign palette or bold heraldic contrast. Mounted and foot figures allow different scene structures within the same set, so a display can shift from a compact knight formation to a wider battlefield arrangement. The 600-minute assembly time points to a substantial modelling project with room for careful preparation, painting and placement. As an assembly kit, it suits builders who enjoy shaping a historical scene figure by figure rather than placing a finished cast straight onto a base. On a shelf, in a diorama or across tabletop terrain, the 1:72 scale makes the group easy to combine with other period miniatures and scenery. Cavalry can be positioned at the front of a charge while soldiers fill out the background, giving medieval layouts more depth and a clearer sense of movement.

Military figures & accessories

Italeri 1:72 WWII American Infantry Model Kit

€10.99

Italeri 1:72 WWII American Infantry is an assembly kit that brings the look of the 1st Infantry Division into a compact scale suited to military dioramas and historical displays. The set contains 50 figures, giving enough miniatures to build a broad infantry presence with movement, spacing, and unit variety across a scene. The figures are represented with the typical equipment of American infantry during World War II, including the M1 Garand rifle, the B.A.R. automatic rifle, the M3 'Grease Gun' submachinegun, and the Bazooka. That mix supports different battlefield roles within the same set, from riflemen and automatic fire support to close-range submachine gun poses and anti-tank coverage. The 1:72 scale works well for combining the figures with vehicles, terrain pieces, and structures in the same scale. Assembly is required and takes 600 minutes. The kit comes as an assembly kit and the parts are supplied unpainted, leaving the finish open for historically inspired uniform colours and scene-specific detailing. The campaign background reaches from Operation Torch in November 1942 to Sicily, Normandy on June 6th 1944, the Ardennes, and the final advance into German territory in 1945. That span makes the set suitable for beach landings, winter battle layouts, road marches, or urban combat scenes where varied infantry poses help shape a more convincing composition.

Military figures & accessories

Italeri 1:72 WWII American Infantry Model Kit

€12.49

Italeri 1:72 WWII American Infantry brings a large formation of U.S. Army soldiers into a compact military model kit, with 48 unpainted figures arranged for historical scenes inspired by Operation Overlord. The 1:72 scale suits dioramas where troop movement, spacing, and battlefield structure matter, whether the layout focuses on a shoreline assault, an inland advance, or a defensive firing line. The set draws on the 1st and 29th Infantry Division, part of the Fifth Corps, and connects directly to the June 6th, 1944 landing at Omaha Beach between Vierville sur Mer and Sainte Honorine des Pertes. Across 3 sprues, the figures appear in varied action stances that help shape a more convincing unit composition instead of a repeated row of identical soldiers. Uniform gear and weapon handling reflect typical U.S. infantry equipment from the period, while the mix of rifles, automatic weapons, and support gun positions gives the group a clear battlefield character. The parts arrive unpainted, leaving full control over colour scheme, weathering, insignia style, and terrain matching. With a stated assembly time of 600 minutes, this kit suits longer bench sessions focused on trimming, painting, and arranging figures into a coherent scene. It can anchor a Normandy landing display, reinforce a larger World War II terrain build, or expand an existing 1:72 military collection with a substantial infantry presence.  Warning! Not suitable for children under 14 years.

Military figures & accessories

Italeri Alpini Figure Set 1:72 WWII Model Kit

€10.99

The Italeri Alpini figure set in 1:72 brings WWII Italian mountain troops into compact scale for dioramas, war game tables and historical displays. With 48 unpainted figures in the box, the set gives a scene the visual mass needed for defensive lines, marching groups or retreat formations shaped around the Russian front campaign of 1942 to January 1943. The subject draws on the Alpini Julia, Tridentina and Cuneense divisions, which fought on the Don front and later retreated across the Russian steppe under severe winter conditions. That background gives the figures a clear historical setting for snowbound layouts, battlefield vignettes and campaign-based collections. The sprues show multiple infantry poses, including advancing, prone and weapon-handling stances, along with mountain troop details such as skis, poles and field gear. Horse and mounted parts also appear on the frames, adding further options for scene composition. Assembly time is stated as 600 minutes, which suits a build focused on preparation, painting and placement. On a display base, the mix of repeated figures and varied actions helps shape larger formations with a consistent uniform look. In a diorama, the winter equipment and 1:72 scale make the set easy to combine with vehicles, terrain pieces and structures from the same period. Assembly kit. Minimum age: 14 years.

Model car kit

Italeri B.M.W. 320 Gr. 5 Model Kit 1:24

€36.99

The Italeri B.M.W. 320 Gr. 5 model kit in 1:24 scale brings a landmark touring car racer onto the workbench with the broad-shouldered Group 5 silhouette, race number 57 and the vivid 1978 DRM Norisring livery. As the build takes shape, the E21-based body, large fenders and rear wing give the car its unmistakable circuit stance. This assembly kit draws on the competition version developed after the FIA introduced the Group 5 rules in 1976 for special production cars. The real car used a new aerodynamic profile and a 300 hp engine, and that racing character carries through the model's proportions and surface details. Separate parts on black sprues form the chassis tub, suspension elements, cockpit fittings and exterior sections, so the structure develops in clear stages. The decal sheet goes beyond body graphics with driver identification, instrument faces and mechanical markings that sharpen the finished presentation. Assembly is required, with a stated build time of 600 minutes. On a hobby desk, the 1:24 scale supports careful painting, decal placement and final body fitment without crowding fine details. Once completed, the B.M.W. 320 Gr. 5 suits shelf display, diorama use or a line-up with other classic circuit racers from the same era.

Military figures & accessories

Italeri Battlefield Buildings Model Kit 1:72

€9.49

Italeri Battlefield Buildings is a 1:72 model kit for building WWII scenery that gives military layouts a defined checkpoint, lookout and field support area. The set combines a tall watchtower, a sentry hut with boom barrier and a covered shelter, creating a compact group of structures that can frame roads, camp entrances or defensive positions with a more complete battlefield setting. The watchtower stands on a narrow 4-leg structure with cross-bracing and a ladder leading to the roofed platform, while the hut and barrier form a clear access point for convoy or perimeter scenes. Textured parts on the sprues reproduce plank surfaces, ground sections and structural panels that respond well to careful painting and weathering. Additional accessories such as sandbags, crates, rocks and stretcher-style pieces help break up open ground and support more layered placement around vehicles and figures. A decal sheet is included for the shelter and checkpoint markings, including a red cross emblem and striped graphics. With 600 minutes assembly time, the build suits modelmakers who want scenery that adds narrative around 1:72 vehicles and figures rather than another standalone machine. The finished structures can anchor a border post, aid station, depot entrance or observation point, giving static displays and tabletop scenes more context at the edges of the action.

Military figures & accessories

Italeri British Paratroopers Model Kit 1:72

€10.99

Italeri 1:72 British Paratroopers brings a WWII airborne unit into miniature form with 50 unpainted figures designed for assembly and finishing. The set draws on the British 1st Airborne Division, known as the Red Devils, and places the scene in Operation Market Garden in September 1944, where airborne troops were tasked with securing key bridges over the Rhine and the Meuse. On the bench, the tan sprues show repeated figures and equipment laid out for a full unit build rather than a single display piece. The 1:72 scale makes the figures suitable for military dioramas, battlefield layouts and integration with other scenery of the same scale. Poses visible across the set include standing riflemen, advancing soldiers, kneeling shooters and prone figures, which helps create movement across rubble, streets or bridge sections. Sculpted uniform features include camouflage smocks, netted helmets, chest pouches, belts, straps, boots and rifles, giving painters defined edges for colour separation and weathering work. The stated assembly time is 600 minutes, which reflects a project with room for careful preparation, painting and scene planning. Placed across a bridge approach, ruined street or defensive line, the figures can form a compact airborne section with a shared historical identity. The set also works as a source of 1:72 infantry for expanding larger WWII layouts where repeated troop types and coordinated poses matter.

Military figures & accessories

Italeri French Infantry WW II Model Kit 1:72

€10.99

Italeri French Infantry WW II brings Free French Forces into 1:72 scale with 49 unpainted figures shaped for historical scenes from the Second World War. The assembly kit draws on the return of French units to Allied action in 1944, making it a strong base for dioramas that place infantry, support weapons and casualty evacuation into one coherent battlefield setting. The figure selection reaches beyond standard marching poses. Riflemen, stretcher bearers, a light machine gun position, a bazooka operator, a mortar team and observation roles with binoculars create a broader tactical spread across the set. That mix helps a builder stage movement, covering fire, reconnaissance and medical support rather than repeating a single stance across the whole display. Because the figures are supplied unpainted, the finish can follow campaign-specific uniforms, field gear tones and weathering effects chosen for Normandy or the Italian front. The 600 minute assembly time also points to a hobby build with room for careful cleanup, painting and placement. On a shelf, the set can form a compact historical vignette with layered action and clear role definition between the figures. On a wargaming table, the 1:72 format works smoothly alongside period vehicles, scenery and other military miniatures, helping larger World War II layouts keep a consistent visual scale while adding Free French infantry to the scene.

Military aeroplane models

Italeri Junkers JU-87B Stuka 1:48 Model Kit

€39.99

The Italeri Junkers JU-87B Stuka 1:48 model kit brings a defining Battle of Britain aircraft into a build that combines historical character with a clearly recognisable airframe. At 22.9 cm long, the finished model shows the inverted gull wings and fixed landing gear that made the Ju 87 silhouette so distinctive in period photographs and reference collections. This assembly kit is built around a detailed plastic format and includes a super decals sheet for 4 versions, opening several marking paths for the same aircraft type. The set also contains photo-etched parts, which add finer definition to selected details and support a more intricate finish than standard moulded sections alone. The subject itself reflects the Ju 87B as a two-seat dive-bomber and ground-attack aircraft first flown in 1935, with combat use beginning in 1936. Italeri frames this edition around the Battle of Britain 80th Anniversary, linking the model directly to a specific wartime chapter. A stated assembly time of 600 minutes gives the project a measured pace suited to careful painting, decaling, and staged construction. The completed aircraft sits well in a display line with other 1:48 aviation subjects, and the 4 marking versions create room to build a distinct variant within that scale collection. Recommended age: 14 years and up.

Model tanks

Italeri M4A2 U.S. Marine Corps Tank Kit 1:35

€35.99

Italeri M4A2 U.S. Marine Corps is a detailed 1:35 scale assembly kit that brings the Sherman medium tank into a focused build with a finished model length of 16.8 cm. The subject represents the diesel-powered M4A2 variant used by the United States Marine Corps in Pacific operations, giving the model a clear historical setting as the hull, turret and suspension come together piece by piece. The kit uses new gluable T54E1 tracks, a feature that adds extra definition to the running gear and changes how the lower hull reads once the tracks are fitted around the wheels and sprockets. A decal sheet for 4 versions opens up different marking choices, including named vehicles and alternate tactical codes, so the final finish can follow different U.S. Marine Corps examples from Iwo Jima in February 1945. The build is marked 14 Years+ and the stated assembly time is 600 minutes, which suits a project with multiple construction and finishing stages. Assembly kit contents are included. On the bench, the 1:35 format gives enough room to work through camouflage, turret markings and smaller exterior details with control. Once completed, the Sherman shape, Marine Corps markings and tracked stance give the model a strong presence in a WWII collection, diorama scene or display lineup centered on Pacific theatre vehicles.

Trailers & accessories

Italeri Reefer Trailer Model Kit 1:24 Scale

€62.99

The Italeri Reefer Trailer model kit brings a latest-generation refrigerated semitrailer into 1:24 scale with a finished length of 58.7 cm and a distinctly European freight profile. The long box body, front-mounted refrigeration unit and triple-axle rear section create the look of a temperature-controlled trailer waiting at a loading dock or lined up with a tractor unit in a road transport display. This assembly kit is built around the detailing that gives a reefer its working identity. The chassis construction, underbody equipment and support-leg structure shape the trailer from the frame upward, while the new wheels update the running gear for a more current appearance. Large side graphics for NORD CARGO, route names including Barcelona, Castellon, Madrid, Malaga and Moerdijk, plus rear-door markings and registration options add a commercial fleet character drawn from European cold-chain transport. The finishing stage also includes paintwork and decal application, which gives the long side panels and rear doors their full visual impact. With 600 minutes assembly time, the build suits a slower bench session focused on alignment, painting and final decoration. Paints, cement and tools are required separately. Once completed, the 1:24 trailer works well as a standalone display subject or as part of a larger truck modelling scene with depot, warehouse or highway freight context.

Model tanks

Italeri VW Typ 82 Kübelwagen Model Kit 1:35

€12.99

The Italeri 1:35 VW Typ 82 Kübelwagen brings a compact World War II military vehicle into a scale model format with a finished length of 10.6 cm. Its small footprint suits display in a cabinet, on a desk, or as part of a larger historical layout, while the open utility-car design gives the build a recognisable silhouette with clear body lines and period character. The kit is supplied as an assembly kit and is recommended for ages 14 years and up. A stated assembly time of 600 minutes points to a build that rewards steady, detailed work across the vehicle and the 2 included figures. The scale of 1:35 places the Kübelwagen in a format widely used for military modelling, making it easy to stage with terrain elements and scene accessories from the same scale. The subject draws on the vehicle's wartime use across demanding terrain, a background that gives the finished model a strong historical identity. On the workbench, the combination of vehicle, figures, and markings supports a complete scene rather than a standalone build. The decal sheet for 1 version helps define the final look, whether the model is placed in a desert setting, a field command scene, or a transport display focused on military vehicles of the period.

Military figures & accessories

Italeri Walls and Ruins II Diorama Kit 1:72

€9.49

Italeri Walls and Ruins II is a 1:72 assembly kit built around ruined architectural scenery for World War II dioramas. Broken walls, a large arch, smaller fragments and sandbag positions create the look of a shelled urban setting, giving military scenes a clear sense of place instead of leaving figures and vehicles on an empty base. The gray molded parts arrive on sprues and show engraved stone blocks, exposed brick, cracked plaster, wood details and rubble textures. One section carries an arched door, another a window opening, and the varied wall heights help shape sightlines, cover and depth across a compact display. Because the scenery is assembled from separate components, the layout can be planned around narrow streets, defensive corners or partially collapsed structures. The stated assembly time is 600 minutes, which suits a more involved build with painting and weathering stages. Placed beside 1:72 soldiers, artillery or vehicles, the ruin sections frame convoy routes, barricaded approaches and damaged strongpoints with a more convincing backdrop. The set also works as a focused terrain build on its own, where brick edges, masonry surfaces and sandbag details reward careful finishing and turn a plain base into a wartime street scene.

Military figures & accessories

Italeri WWII Accessories and Bunkers Model Kit

€22.99

Italeri WWII Accessories and Bunkers is a 1:72 model kit built around a fortified World War II bunker scene with terrain and defensive details. The finished layout brings together a bunker structure, a shaped ground base and a spread of scenic parts that give military displays a clear historical setting rather than a bare stand-alone structure. The kit uses unassembled moulded parts and a vacuum base measuring 262 x 156 mm to form the scene. Curved wall sections, textured terrain elements and smaller structural pieces shape the bunker itself, while separate scenic details build out the position around it. Sandbags, barrels, crates, barricade-style frames and anti-tank obstacles add layers that suit diorama composition, static military displays and other 1:72 layouts. The bunker design shown in the assembled scene features a grass-covered roof, firing slits and an entrance opening, giving the fortification a recognisable defensive profile. With a stated assembly time of 600 minutes, the build suits model makers who enjoy arranging scenery as well as structure. The completed scene works as a focal point in a WWII display, as a terrain feature alongside other 1:72 military subjects, or as a compact standalone diorama with battlefield character.

Model car kit

Mercedes 500 SLC Model Kit 1:24 Scale Coupe

€36.99

The Italeri Mercedes 500 SLC brings a classic 1970s coupe into 1:24 scale as a detailed assembly kit with crisp body lines, chromed parts and rubber tyres. The long bonnet, pillarless side profile and broad front grille give the finished model the unmistakable stance of the full-size grand touring car, whether it is built as a shelf display or as part of a classic road-car collection. This kit draws on the Mercedes-Benz 500 SLC, a coupe derived from the C107 series and powered in the original car by a 4973 cc engine with 237 HP. That background shapes the model's character: a large 2-door coupe with a strong road presence rather than a stripped competition machine. The exterior details visible in the source design include dual round headlights, a prominent star emblem, black lower body trim, chrome-style wheel covers and bumper-integrated lighting elements. The body finish shown for the model combines a light green main colour with contrasting metallic and dark trim areas, giving painters a clear route to a period-correct look. With a stated assembly time of 600 minutes and a 14 Years age marking, the build suits modellers who want time for careful preparation, painting and final detailing. On a workbench, the separate finishing stages let the chrome, body colour and tyre textures develop their own visual roles. Once completed, the coupe shape and classic Mercedes proportions give the model a composed display presence among road cars from the same era.

Model car kit

MiniArt D8511 Tractor Model Kit 1:24 Scale

€48.99

MiniArt D8511 brings a 1936 German industrial tractor into 1:24 scale as a detailed plastic model kit with a strong mechanical look and a clear vintage silhouette. The larger scale gives the finished tractor room to show its tall exhaust stack, exposed controls, broad wheels and body panels with more visual presence on the shelf. The assembly kit is built around multiple molded parts that represent the tractor's structure and working hardware rather than a simplified toy-like form. Sprue details shown for the kit include cylindrical tank elements, pipe sections, bracket parts, platform surfaces and engine-area components that help shape a more technical build. A separate decal sheet adds period markings such as LANZ graphics, identification numbers and small warning labels, supporting a finish that matches the industrial character of the original machine. The stated assembly time is 600 minutes. Paints are required separately. On the workbench, the 1:24 format leaves enough space for careful painting, decal placement and weathered finishing effects across the tractor's body and mechanical areas. Once completed, the D8511 suits display in a vehicle collection, a historic machinery lineup or a diorama scene centered on 1930s industrial transport.  Warning! Not suitable for children under 14 years.

RC helicopters

Nano Tyrann 230 Gyro, RC helicopter, 2CH IR

€24.99

Compact dimensions and a coaxial rotor layout give the Nano Tyrann 230 Gyro a light, agile presence in indoor flight, while intelligent gyro electronics keep the model composed during lift-off, hovering and direction changes. At 225 mm long, 97 mm high and only 31 g in weight, this 2-channel RC helicopter brings controlled handling into a format that is easy to store and quick to prepare. The infrared control system focuses the flying experience on the core inputs, with left and right trim on the transmitter to correct the track when needed. A 3.7 V 130 mAh LiPo flight battery powers up to 8 minutes of flying time, and charging runs through the included USB cable. The rotor diameter of 180 mm gives the helicopter a balanced footprint for indoor rooms, where short climbs, hovering practice and careful turns can be repeated in a manageable space. The switchable LED adds a visible point at the nose during flight and can be controlled directly from the transmitter. The ready-to-fly set suits spontaneous sessions in living rooms, hobby spaces or other indoor areas where compact RC aircraft can be flown with precision. Age 12 years and up. Only suitable for indoor use.

Military figures & accessories

Pz.Kpfw. V Panther Ausf. A 1:72 Model Kit

€15.99

The Italeri Pz.Kpfw. V Panther Ausf. A in 1:72 scale brings one of the most recognisable WWII tank designs into a compact model format with a strong historical identity. The finished subject combines the Panther's angled front armour, turret silhouette and long-barrelled main gun in a size that suits shelf display, collection cabinets and tabletop military layouts. This detailed plastic kit is built from multiple sprues that cover the hull, turret, road wheels, drive sprockets and exterior fittings. The turret assembly uses separate parts for the gun barrel, mantlet and roof details, while the hull construction adds deck features, side components and smaller mounted elements for a more layered finish. The instructions also show optional Zimmerit surface texturing for builders who want to recreate anti-magnetic coating effects on the vertical and sloped armour plates. Historical finishing is a major part of the build, with 5 marking versions and camouflage references spanning April 1944 to April 1945. During the build, the compact 1:72 format still leaves room for distinct details such as the running gear, side skirts and turret fittings, making painting and weathering especially rewarding. The included figure can be placed with the completed tank to strengthen scale presence in a display or diorama scene. Assembly kit contents are included, while cement, paints and tools are required separately.  Warning! Not suitable for children under 14 years.

Cars

Scalextric Brabham BT26 Monaco GP '69 Slot Car

€79.99

Scalextric Brabham BT26 brings the Monaco GP '69 car into 1:32 scale with the slim nose, open cockpit and exposed-wheel Formula layout that defined late-1960s grand prix racing. The dark blue body, white aero elements and period number panels give the model a clear race-day identity as it threads through bends on a slot circuit. Close inspection reveals silver suspension parts, side exhaust pipes, rear wing supports and an exposed engine area with visible intake detail. Sponsor markings such as Dunlop, Autolite and Castrol deepen the historic racing character, while the seated driver figure with helmet adds another layer of realism to the cockpit view. The guide beneath the front section keeps the car aligned in the slot, turning the detailed body into a working racing model rather than a static replica. On a home layout, the compact 1:32 format suits head-to-head running, pit-lane scenes and display between races. Age 14 Years. Whether circling a straight, diving into a curve or parked trackside, the Brabham BT26 carries the look of a classic Formula machine in a format made for slot racing.

Cars

Scalextric Lotus 79 #5 Andretti 1978 Slot Car

€75.99

Scalextric Lotus 79 #5 Andretti 1978 brings the shape of a World Champion Formula 1 car into 1:32 slot racing with a black and gold livery, open cockpit and the low, winged profile that defined its era. Set on the rails, the car combines historic motorsport character with the focused feel of a single-seater built for fast circuit running. The bodywork carries period markings such as John Player Special, OLYMPUS CAMERAS and Valvoline, with the number 5 placed into the race layout seen across the nose, side and rear sections. A silver driver helmet with red striping sits in the cockpit, adding a clear focal point when the car is viewed from above or from the side of the track. The front wing, rear wing, sidepods and exposed wheel layout give the model the unmistakable proportions of a late 1970s Grand Prix machine. Close-up views also reveal details around the rear section, where the wing, engine area and upper body surfaces add extra visual depth. On a home circuit, the 1:32 scale suits close racing, lane changes and repeated laps where the long, low silhouette stays easy to read through bends and straights. The same detailing also gives the car a strong shelf presence between sessions, especially when the black finish, gold pinstriping and race graphics are seen from a side or top angle.  Warning! Not suitable for children under 14 years.

Cars

Scalextric Porsche 963 Daytona 25 1:32 Car

€59.99

Scalextric Porsche 963 Daytona 25 captures a current endurance racing shape in a 1:32 slot car format, pairing the low, wide prototype profile with the JDC Miller MotorSports livery for a focused circuit presence. The Porsche 963 name and Daytona 25 race theme give the car a recognisable motorsport identity that reads clearly on the track as it moves through bends, chicanes and straights. The 1:32 scale keeps the car aligned with a widely used slot racing format, making it a natural fit within existing race line-ups and garage displays. Its modern prototype silhouette brings a different visual character from GT and touring entries, with a body shape defined by endurance-racing proportions rather than road-car cues. The named JDC Miller MotorSports decoration adds team-specific detail instead of a generic race finish, which helps each lane assignment and race order stay easy to follow during head-to-head sessions. Batteries are not included. With an age marking of 14 Years, this car sits in the older hobby category and suits collectors as well as regular home circuit use. It works well as a single addition to a current grid, as a themed Daytona entry for endurance-style running, or as part of a broader modern prototype line-up built around real race names and liveries.  Warning! Not suitable for children under 14 years.

Cars

Scalextric Puma Rally Hot Laps Race Set

€189.99

Scalextric Puma Rally Hot Laps brings 1:32 slot racing into a rally themed layout with 2 Ford Puma Rally1 cars, a 532 cm circuit and a raised flyover that breaks the lap into fast straights, tight turns and a clear overhead crossing. The finish gantry and lane markings frame each run with a race day look that suits repeated head to head sessions. The set uses wired hand controllers with red and blue trigger sections, making lane identity easy to read at a glance while the speed limiter supports steadier throttle control. The Hot Laps app extends the racing format with single player championship and 2 player head to head modes shown on the mobile interface. Course selection in the app includes Desert Stage, Forest Stage and Mountain Stage, each presented with its own difficulty level. The track footprint measures 210 x 140 cm, giving the figure 8 style layout enough width for the bridge supports, long sweepers and the start area. On a table, playroom floor or hobby setup, the circuit creates a compact rally scene with visible elevation change and a strong sense of competition between both lanes. The Ford Puma Rally1 pair suits quick rematches, timed laps and side by side duels where the crossover, finish line and controller input stay in constant view. Age 14 Years  Warning! Not suitable for children under 14 years.

Cars

Scalextric Williams FW11B 1987 Slot Car 1:32

€75.99

Scalextric Williams FW11B 1987 brings a classic Grand Prix silhouette to 1:32 slot racing with its low single-seater body, open cockpit and prominent front and rear wings. The number 5 livery and Honda-powered Williams styling give this model a strong late-1980s Formula 1 identity that reads clearly on the circuit and in a display line-up. The bodywork carries period-style sponsor graphics across the nose, side sections and rear wing, while the exposed suspension styling and driver helmet detail add depth to the racing replica. Beneath the car, the guide blade sits in the slot and the pickup braids draw power from the rails, the core mechanism that lets the car follow the groove through straights and bends. Black wheels and wide slick tyres complete the era-correct look, matching the visual language of Grand Prix cars from the 1987 season. On a home circuit, the compact 1:32 scale fits naturally into established slot layouts and makes close wheel-to-wheel sessions easy to stage. Between races, the bold yellow, blue and white colour scheme, tall rear wing and crisp markings give the Williams FW11B 1987 a strong shelf presence for motorsport collections. Age 14 Years

Model trucks

Scania T143 M500 Top Line 1:24 Model Kit

€62.99

The Italeri Scania T143 M500 Top Line captures a landmark heavy truck in 1:24 scale, translating the presence of the 1990s road icon into a detailed assembly kit. Its subject is the Scania 143 M500 Topline, a tractor unit known for combining long-distance capability with a high cab format that gave the vehicle its unmistakable road profile. The original truck was defined by a 500-horsepower V8 engine and a 16-speed transmission, and those specifications give this model much of its appeal as a technical replica. The Topline configuration is central to the look, with a high, spacious cabin that set this version apart within commercial transport. The source vehicle was also associated with an advanced braking system, air suspension, strong efficiency and substantial load capacity, placing it firmly in the world of heavy logistics. Assembly is required, and the stated build time is 600 minutes. The box contents list an assembly kit. On the workbench, the 1:24 format gives the truck a scale large enough to reward careful painting and finishing while keeping the build focused on a single classic tractor unit. Once completed, the model suits display settings that highlight cab shape, grille details and the character of a well-known European long-haul design. Minimum age: 14 years.  Warning! Not suitable for children under 14 years.

Model tanks

Sd.Kfz. 171 Panther Ausf. A 1:35 model kit

€36.99

The Italeri Sd.Kfz. 171 Panther Ausf. A in 1:35 scale brings one of the most recognized WWII tank designs into a build focused on shape, surface detail and historical finishing. The assembly kit centers on the Panther Ausf. A configuration, with the angled front armour, turret form and long 75 mm KwK 42 gun giving the model its unmistakable stance on the shelf or in a diorama scene. The full-size vehicle was developed in response to the Soviet T-34 and KV-1 and combined mobility, armour layout and firepower in a design that served on several major fronts. That background gives the model a strong historical identity while the kit format leaves room for careful painting and weathering work. Assembly time is stated as 600 minutes. The box contents are listed as an assembly kit. Paints, cement and tools are required separately. Marking choices support several wartime versions, including vehicles used in Normandy, Northern Italy and Ukraine during 1944, which opens the door to different camouflage treatments and unit presentations. On a workbench, the build suits methodical step-by-step construction; once finished, the 1:35 scale format sits naturally in a military display alongside other armour subjects and scenery elements. Age 14 Years+

RC helicopters

Toxic Spider 340, RC helicopter, 100% RTF

€39.99

The Toxic Spider 340 100% RTF combines a coaxial rotor system, intelligent gyro electronics and a compact indoor format in one ready-to-fly RC helicopter. Black and green styling, illuminated LED headlights and a top speed of 10 km/h give each flight a crisp, technical presence as the model lifts from its landing skids and settles into stable hovering. Its 2.4 GHz remote control system works with 3.5 channels, allowing coordinated inputs for ascent, descent, turning and directional correction. The aluminium tail boom adds a light, rigid rear structure that supports balanced handling in the air. A 3.7 V 400 mAh LiPo flight battery powers the helicopter for up to 8 minutes, giving enough time for repeated take-offs, short circuits and hover practice. Included in the set are the ready-to-fly model, the remote control system, the LiPo flight battery, a USB charger, 3 transmitter batteries and instructions. The age marking is 12 years and up. Indoor sessions suit the Toxic Spider 340 especially well, whether the focus is on learning steady hover control in a living room or linking smooth turns through open space in a hallway. With the charging gear and transmitter batteries already included, the set brings the key flying components together in one box for immediate RC action after charging.

RC tires & rims

1:10 2WD Wheel Set XL, RC tire set

€37.99

Large-diameter tires can transform the look and running character of a 2WD model, and this 1:10 2WD Wheel Set XL is built exactly for that step. The set combines 4 XL wheels in a black and white finish with front-axle steering levers, creating a coordinated upgrade for buggy and truck chassis that move toward a monster-style setup. The technical layout is split clearly between front and rear fitment. Front rims are prepared for ball bearings, while the rear rims use Tamiya 12 mm hex mounts, matching a common 2WD drivetrain arrangement. Each tire measures 105 mm in diameter and 65 mm in width, dimensions that change both ground presence and the tire footprint on uneven surfaces. The included steering levers are not an afterthought; they are supplied specifically for the front axle because the larger wheel size can alter conventional steering angles. That added hardware keeps the conversion focused on usable steering response rather than appearance alone. On gravel, dirt and rougher off-road sections, the broader tire format gives 1:10 2WD builds a more planted contact area. The set suits rebuilds, visual conversions and chassis updates where standard wheels look undersized against a taller off-road stance. Age 14+

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD

€31.49

Built for 1:10 2WD buggies and trucks, this 4-piece all-terrain wheel set brings a track-ready combination of steering precision and drive traction to mixed surfaces. The black and white wheel design pairs 2 front tyres and 2 rear tyres in different widths, creating a layout that suits the demands of a 2-wheel-drive setup on road, gravel, sand and grass. At the front, the 26 mm tyre width supports a more exact steering response, while the 43 mm rear tyres give the driven axle a broader footprint for stronger acceleration grip on loose ground. Each wheel has a 90 mm diameter, giving the chassis a useful balance of agility and clearance over uneven terrain. Foam inserts inside the tyres help the contact patch stay consistent as the model changes direction or loads up under power. The front rims are designed for ball bearings, and the rear rims use Tamiya hex mounts, matching the different mounting needs across the vehicle. Because the tyres are professionally pre-glued, the set goes straight into the workshop plan without a separate bonding step. That makes it a practical choice for replacing worn running gear, preparing a buggy for mixed-surface driving, or setting up a truck for more dependable traction away from smooth tarmac.

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD/4WD

€31.49

Built for mixed-surface running, this 1:10 all-terrain wheel set combines a 90 mm diameter with a 2WD/4WD layout that suits a wide range of RC setups. The 4-piece configuration uses 2 front tyres and 2 rear tyres, creating a purposeful combination for models that need clear steering response at the front and stronger drive support at the rear when the surface changes from asphalt to loose ground. The front tyres measure 26 mm in width, while the rear tyres measure 43 mm, giving the set a staggered format that supports balanced handling under acceleration. Black and white rims add a clear competition-inspired look, and the tyres are professionally pre-glued to the rims for a clean fit straight from the pack. Integrated foam inserts help the tyres hold their shape during intensive driving manoeuvres, so the tread can work consistently as the model loads up in turns and over uneven sections. The wheel set is designed for 4 x 12 mm Tamiya hex mounts, making it a practical replacement set or a fresh running option for compatible chassis. On road, gravel, sand or grass, the all-round tread is aimed at drivers who switch between surfaces instead of tuning for only one. The set suits routine replacement after wear, but also works as a handling-focused update when a model needs broader traction coverage for everyday RC running.

RC combustion engines & glow plugs

1:10 BL Motor Dragster Turbo 2.0, motor

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 3200KV is a brushless drive unit created for electric RC vehicle projects with a clear focus on dragster-style power delivery. Its 3200KV specification points to a fast-revving motor character that suits straight-line acceleration setups and gives model-building enthusiasts a concrete tuning component for 1:10 platforms. As a standalone motor, this unit fits into workshop-based RC builds where the drive system is chosen part by part. The brushless layout makes it a relevant option for hobbyists comparing replacement motors or planning a fresh electric configuration around a defined KV value. The Turbo 2.0 naming gives the motor a distinct place within the range, while the 1:10 scale reference keeps the application tied to model car use rather than full-size electronics. No batteries are included. The age marking is 14 Years. On the bench, this motor suits rebuilds, performance-focused maintenance and targeted drivetrain changes in electric model cars. It also works well as a search-friendly option for enthusiasts narrowing a setup by scale, motor type and 3200KV specification before matching the rest of the electronics separately.  Warning! Not suitable for children under 14 years.

RC brushless motors

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a compact power package to RC vehicle builds with a sensorless 3200 kV motor and an electronic speed controller matched to hobby-grade running. In the chassis, the black finned motor layout and separate controller create a clean drive setup for fast acceleration and direct throttle response. The motor delivers a no-load speed of 24,420 RPM and approx. 390 W short-term output, with 53 A continuous current for sustained running. Its dimensions of 35.8 x 50 mm and a shaft diameter of 3.175 mm provide concrete fitting data for compatible installations, while the motor weight of 148 g and ESC weight of 80 g help when planning the balance of a 1:10 model. The controller is designed for 7.4 V operation and works with 2S LiPo or 6-cell NiMH battery packs. Forward, brake and reverse functions are built into the ESC, and the T-Plug connector forms part of the power connection. This set suits RC car projects that need a coordinated motor and controller combination rather than separate component sourcing. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a matched drive upgrade to electric RC models with a 2000 kV sensorless motor and a 60 A electronic speed controller. This 2-part combination is built for hobby setups that need clear throttle delivery, compact installation and a defined power package in one box. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, making it a concrete fit option for many 1:10 chassis layouts where motor space and shaft size matter during planning. Its no-load speed reaches 15,170 RPM, while short-term output is rated at approx. 236 W for lively response when the drivetrain comes under load. The ESC adds 80 g, handles 60 A continuously and up to 360 A peak, and manages forward, brake and reverse functions through a sensorless brushless system. Power supply compatibility covers 2S LiPo and 6-cell NiMH packs, with a T-Plug connector already specified. This set suits rebuilds, replacement projects and performance-focused electronics swaps in 1:10 electric vehicles. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions, giving model-building enthusiasts a clearly defined basis for a fresh drive configuration.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, motor, 2600KV

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 2600KV is a brushless drive component for electric model vehicle setups, centered on a 2600KV motor specification and a format matched to 1:10 applications. As a dedicated replacement or upgrade part, it brings the drive system back into service with a clearly defined motor unit for workshop benches, rebuilds and running repairs. Within a powered vehicle setup, the motor sits at the heart of the drivetrain, making the KV rating a key reference point when matching the unit to the existing electronics and the intended running character. The product data identifies this version specifically as the Dragster Turbo 2.0 motor, which keeps the designation clear when replacing a worn unit or sourcing the correct spare for an existing model. Because this is a component rather than a complete vehicle, the focus stays on fit within an electric model system and on the practical value of having the correct motor type ready for maintenance. The 14 Years age marking is stated in the product data. On the workbench, this kind of motor suits planned repairs, drive refreshes and parts-led tuning sessions where a named 1:10 brushless unit is the required starting point for getting a model back on track.  Warning! Not suitable for children under 14 years.

RC servos

1:10 KO RSx4S-one10X, servo, low profile

€124.99

The KO RSx4S-one10X is a 1:10 low-profile servo shaped for compact RC chassis where installation height and steering packaging need careful control. Its metal gear layout and the stated 11.8 V specification place it firmly in performance-focused electronics setups, giving model-building enthusiasts a concrete steering component for advanced builds. The low-profile housing suits layouts where body clearance, linkage position and surrounding electronics leave little spare room. In that context, the 0.10-second speed figure supports fast steering response when direction changes need to happen with little delay. The servo format also makes it relevant for 1:10 on-road and competition-style configurations that rely on tidy component placement rather than oversized hardware. As an electronic control component, it belongs in a build where the steering system, power supply and chassis geometry are chosen as a matched package. On the bench, the compact form helps when planning a clean electronics layout around the steering area. Once installed in a compatible 1:10 model, the combination of low-profile dimensions, metal gears and high-voltage operation supports focused tuning for precise handling response.  Warning! Not suitable for children under 14 years.

RC cars

1:10 Night Racer 2.0, RC car, 2.4GHz RTR

€74.99

The Night Racer 2.0 brings low-slung on-road styling and ready-to-run RC action into one focused 1:10 setup, with a 2.4 GHz control system and a top speed of 20 km/h shaping fast laps on smooth ground. At 485 mm long, 200 mm wide and 125 mm high, the body cuts a sharp racing silhouette that stands out in motion and under evening light. A 260 mm wheelbase and a weight of 737 g give the chassis a balanced footprint for quick steering inputs and stable tracking through linked corners. The differential transmission helps the driven axle work cleanly when the car changes direction, while the suspension layout keeps the wheels in contact over uneven patches and transitions. The included 7.4 V 1200 mAh Li-Ion drive battery supports up to 40 minutes of driving time, and the USB charger keeps the running gear simple to prepare between sessions. Detailed paintwork adds a finished motorsport look, and the blue illuminated rim design sharpens the visual effect once the light drops. On a driveway, in a car park or across a smooth indoor surface, the RTR setup gets the car moving with the supplied remote control system and included transmitter batteries. The compact racing profile, quick response and illuminated wheel styling suit short speed runs, repeated corner practice and evening cruising alike.

RC tires & rims

1:10 Wheel Set XL, RC wheels, 4WD 12 mm hex

€34.49

Large-diameter wheels can change both the look and the handling of an RC build, and this 1:10 4WD wheel set XL does exactly that with 4 complete wheels in black and white. The 105 mm diameter and 65 mm width create a noticeably larger footprint that suits rougher ground and gives the chassis a more assertive visual presence. Inside each tyre, foam inserts are matched to the construction so the rubber is supported under load instead of folding over or rolling at speed. That internal support helps the tread stay more stable through acceleration, direction changes and uneven sections, which can make the model feel calmer and more predictable in motion. The set is built around 12 mm hex mounting, a widely used format that allows straightforward installation on matching wheel hubs. Compatibility is stated for Tamiya hex mounts, making the set a practical option for many established 1:10 4WD platforms. On loose surfaces such as sand or grass, the XL dimensions can help the model carry momentum with a broader contact area. On firmer ground, the same wheel size gives the chassis a fuller, more aggressive stance that changes the overall character of the build without altering the core layout.

RC Crawler

1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR

€249.99

The 1:10 X-Crawlee Pro 3.0 brings crawler driving into a 43.5 cm format built for rough ground, with a 270 mm width, 235 mm height and a weight of 2280 g that gives the model a planted stance on the trail. Its 100% RTR setup puts the focus on driving from the first session, while the 2.4 GHz remote control system keeps control inputs clear and direct. Power comes from the included 7.2 V NiMH drive battery with 1800 mAh, charged via the included 7.2 V / 1 A USB charger. At full capacity, driving time reaches up to 70 minutes, giving longer runs across stones, dirt tracks and uneven paths without frequent charging breaks. The controller is compatible with NiMH and LiPo batteries, which broadens battery choice for later setup changes. Full ball bearings support efficient running through the drivetrain, while the suspended rigid axles give the crawler the axle movement needed for slow, technical sections. The ready-to-run set includes the model, the radio system, the drive battery, the USB charger, 4 AA transmitter batteries and the manual. With a 14 years+ age marking and a single-vehicle setup, the X-Crawlee Pro 3.0 suits focused crawling sessions where line choice, throttle control and steering precision shape every climb.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Ryken, RC buggy, 100% RTR 4WD

€199.99

The 1:10 XS Ryken brings fast off-road running into a compact RTR format, pairing a 550 brushed motor with permanent 4WD for direct launches and steady pull across mixed terrain. At 410 x 300 x 175 mm and 1741 g, the buggy carries a broad, planted stance that suits dirt tracks, gravel paths and uneven ground. Power reaches the wheels through hardened steel drive shafts and a central steel cardan shaft, while front and rear metal differentials with sealed steel bevel gears keep the drivetrain precise under load. A chassis mounted on ball bearings supports efficient running, and the splashproof housing and electronics keep light rain and wet ground from stopping the session. The rear wheelie function uses targeted torque and traction control to lift the front end under acceleration, adding a distinct driving character beyond straight-line speed. A rear spoiler and rollover cage complete the body with added protection for the shell and electronics during tip-overs. The 100% RTR setup arrives pre-assembled with a 2.4 GHz remote control system, a 7.4 V 2600 mAh drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. That makes the XS Ryken ready for immediate running on open ground, from compact backyard courses to rougher off-road stretches where grip, suspension travel and drivetrain control all come into play.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Ryken, RC car, 100% RTR 4WD blue

€199.99

The 1:10 XS Ryken brings off-road action into a 410 mm long RC car with a wide 300 mm stance, 175 mm height and a ready-to-run setup built for immediate driving. Its blue body sits over a layout tuned for rough ground, where the combination of 4WD and generous clearance gives the chassis the grip needed for loose tracks, uneven paths and dusty sections. Power comes from a 550 brushed motor paired with a 7.4 V 2600 mAh Li-Ion drive battery, delivering up to 40 km/h and around 12 minutes of driving time. The hardened steel drive shafts transfer power with minimal play, while the sealed steel differential gears support clean, direct drivetrain response when dirt and vibration build up. The integrated wheelie function adds a distinct handling character by managing torque and traction so the front end can rise under acceleration. Oil-damped suspension helps the car settle after bumps and keeps the tyres working across broken surfaces. As a 100% RTR model, the set includes the ready-to-run vehicle, a 2.4 GHz remote control system, the drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. With a weight of 1741 g, the chassis carries enough presence for stable running on open ground, gravel stretches and wet outdoor surfaces where splashproof electronics matter.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 4WD 100% RTR

€199.99

The 1:10 XS Tekuro brings fast off-road driving into a 410 x 300 x 175 mm format with permanent 4WD, a high-torque 550 brushed motor and a top speed of up to 40 km/h. Grey and green bodywork, 110 mm monster tyres and a raised stance give the model a strong trail-ready presence before the first run even starts. Its drivetrain is built around a central steel cardan shaft, reinforced steel drive shafts at the front and rear, and metal differentials with steel bevel gears on both axles. Ball-bearing mounting throughout supports efficient running, while the XT60 high-voltage plug system and quick-change battery holder simplify battery swaps between sessions. The 8 kg steering servo uses a metal gearbox and water-protected construction, matched with splash-protected electronics and a water-protected 2.4 GHz radio system. The included 2600 mAh 7.4 V Li-Ion battery supports about 15 minutes of driving time, and the complete RTR setup keeps preparation focused on charging and heading out. At 1741 g, the chassis has the planted feel needed for dirt paths, gravel sections and uneven ground. Tight turns, short bursts of acceleration and repeated launch attempts all suit the Tekuro's mix of traction, suspension travel and wheelie-ready rear setup.  Warning! Not suitable for children under 14 years.

Models & trailers

1:12 MB Unimog U300, RC truck, 100% RTR

€199.99

The MB Unimog U300 has long been known as a compact utility truck with strong off-road credentials, and this 1:12 RC version carries that working character into a fire brigade layout with covered rear bed, roof beacons and front LED lighting. At 450 mm long, 220 mm wide and 260 mm high, the model brings a substantial road presence while staying manageable for regular driving sessions. The fully assembled chassis is ready to run with a powerful electric motor, digital proportional control and a 2.4 GHz remote control unit. Steering and throttle inputs can be adjusted progressively, which gives the truck a more controlled feel than simple on or off commands when lining up turns or easing over rougher ground. The included 7.4 V 850 mAh Li-Ion drive battery supplies up to 60 minutes of driving time, and a USB charger is part of the set. Horn and motor sound can be triggered from the transmitter, adding another layer of interaction during runs. With a vehicle weight of 2052 g, the model has enough substance to suit its utility-truck character. Fire brigade markings, the covered cargo area and the upright Unimog proportions make this RC truck fit naturally into rescue-themed driving scenes, yard layouts or obstacle courses with gravel, paving and mixed surfaces. The included transmitter batteries complete the 100% RTR setup, so the model can head straight into its first run after charging.

Basic accessories

1:14 2-Axle Boxed Trailer, model kit

€589.99

A 2-axle box trailer is a familiar sight in road freight, built to carry cargo in a closed body while keeping the load protected on the move. This 1:14 model kit brings that transport format into a detailed build with a laser-cut steel frame, a box body with CNC-milled aluminum parts, and the long, clean proportions of an enclosed trailer behind a tractor unit. The chassis uses 3 mm and 1 mm steel, while the bogie is formed from sheet steel in a sandwich structure. Wide chromated wheels run on ball bearings and carry wide tyres, and steel underride protection sits on the left and right sides. At the rear, an 8 mm aluminum bumper adds another machined metal detail, and a 1:14 trailer splash guard completes the lower section. The body measures 545 mm in length, 195 mm in width, and 290 mm in height, with a total weight of 4,800 g. Assembly is required, with a stated assembly time of 600 minutes. In use, the rear loading door opens on aluminum hinges through 270°, and magnets handle the door locking. Coupled behind a suitable 1:14 tractor unit, the enclosed body suits scale logistics scenes, articulated truck displays, and workshop builds that focus on metal construction, moving parts, and realistic trailer proportions. The kit includes instructions.

Models & trailers

1:14 2-Axle Dump Semi-Trailer, trailer

€589.99

Built in 1:14 scale, this 2-axle dump semi-trailer brings the look of a full-size tipper into a model-building format with a rigid PVC body, a CNC-milled aluminum frame and a 4-wheel layout. The silver dump body, black chassis and raised front platform create the working profile of a road-going bulk trailer, whether coupled to a tractor unit or parked on its support legs. The assembly kit focuses on mechanical detail rather than simplified styling. Vertical body panel lines, mudguards, rear underrun protection and ladder elements give the trailer a technical finish, while the king pin can be adjusted to suit the setup. The chassis uses new axles with 8 mm lift, and the rear section is shaped around a mechanically unlocking tailgate for realistic unloading action when a tipping function is installed separately. 7-chamber taillights and dummy air spring details extend the scale appearance across the rear and underside, and the ball-bearing wheel setup supports smooth movement during handling. On a workshop shelf, in a truck yard scene or behind a matching 1:14 tractor, the semi-trailer adds a strong construction-transport theme with visible engineering throughout the frame and body. Assembly kit and manual are included. A spindle drive, motor, battery, switch, radio gear, a charger and paints are required separately for expanded functions and finishing.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-Axle Dump Trailer, trailer kit

€519.99

The 1:14 2-Axle Dump Trailer brings working tipper style into a scale truck setup with a tandem-axle layout, a gray rigid PVC dump body and a steel profile frame with laser-cut, laser-welded construction. Built as an assembly kit, it focuses on the mechanical character of a real dump trailer, from the drawbar and support leg to the rear gate area and underbody linkage. The chassis uses 8 ball bearings across the wheel setup, giving the running gear a more precise feel as the trailer rolls behind a compatible tractor unit. Fulda Variotonn wide offroad tyres and the trailer axle with air ride dummy push the model further toward commercial-vehicle realism, while the 7-section tail lights add a recognisable rear-end detail. The automatic back wall locking with 2-hook design gives the rear section a functional finish that matches the tipper concept. The support leg keeps the trailer upright when detached, and the drawbar with hitch eyelet completes the classic central-axle trailer layout seen in heavy haulage scenes. On the bench, the kit offers a focused build around frame, axle and body assembly. Once finished, the trailer suits construction, transport and unloading scenes in 1:14 scale layouts, whether parked as a standalone model or coupled into a larger truck combination. Age 14 Years. Spindle drive, gear box motor, a control switch and paints are required separately.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-Axle Material Trailer, trailer kit

€574.99

Built for 1:14 truck scenes, the 2-Axle Material Trailer brings a long loading bed, twin-axle layout and working drop-side bodywork into a scale transport build with a clear commercial look. The grey panel sides, dark front bulkhead and wood-look floor give the trailer the character of a real material hauler, whether it is coupled behind a road tractor or parked at a loading point. The kit structure goes beyond a simple rolling chassis. The assembly sequence includes 2 axle units, a pivoted bogie, a main frame with crossmembers, mudguards, underride protection, rear bumper parts and upright posts around the bed. Ball bearings are fitted into each wheel hub, and the axle geometry offers normal height or a +8 mm position during assembly. Rear light housings are part of the build, and the manual also shows optional LED taillight boards as separate accessories. A spare wheel holder and additional fittings are listed as optional accessories rather than included contents. Once assembled, the trailer suits realistic loading and transport layouts in 1:14 scale, from building-material scenes to depot and yard setups. The opening side panels and rear section support a more active display style, while the detailed underframe, mudflaps and side protection parts give the finished trailer convincing presence from low viewing angles.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-axle Riedler, stanchion trailer

€509.99

The 1:14 2-axle Riedler stanchion trailer brings timber-haul detail into a scale transport setup with a steel sandwich frame, solid aluminium stanchions and a long, purposeful silhouette. At 620 x 190 x 305 mm and 2,600 g, the trailer adds real presence to a model road train while reflecting the look of the full-size Riedler vehicle named in the licence. Its mainframe uses 3 mm and 1 mm sheet steel parts that are laser cut and CNC bent, and the bogie follows the same sandwich construction for a consistent mechanical layout. The mounted bogie is adjustable and uses sliding pads to support manoeuvring through tighter course sections. A one-piece drawbar in fibre-reinforced plastic carries a chequer plate application and is held at a coupling height of 75 mm by 2 springs. The semitrailer axle includes dummy pneumatic springs, while the left and right underride guards and the CNC-milled rear bumper add further metal detail. The stanchion holders can be loosened with 2 grub screws, then repositioned or removed to suit different loading arrangements for logs or other long cargo. Ball-bearing mounted chromium wheels with wide tyres, mudguard splash protection, bumper mud flaps, a licence plate holder and 7-compartment rear lights build up the finished transport character. A decoration set is included. Age 14 Years. The Carson towing coupling 500907182 is required separately for use on the TAMIYA Volvo FH16 tractor unit.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 20Ft. Sea-Container, kit, trailer load

€199.99

Freight containers shaped modern transport with a standardised form built for road, rail and port handling. This 1:14 20Ft. Sea-Container Kit brings that familiar cargo silhouette into a scale truck setup with a 432 mm length, 180 mm width and 185 mm height. The structure combines an anodised silver aluminium frame with plastic sheet body sections that reproduce the look of a traditional container. Corrugated surfaces, corner details and the separate frame layout give the model the character of a working freight load rather than a plain box shape. The plastic panels are paintable, which supports custom liveries, fleet styling or a weathered finish that matches a chosen tractor unit and trailer combination. At the rear, the doors are movable and fitted with a locking mechanism, so the handling detail is part of the build rather than only a visual effect. The container is designed for the 2 axle container semi-trailer 500907334 and locks to the chassis via twist-locks. That mounting method reflects the technical logic of full-size container transport and helps the model sit naturally in logistics, harbour or long-haul display scenes. 14 Years marks the recommended age.

Models & trailers

1:14 20Ft. Semitrailer, trailer kit, tandem axle

€274.99

Built around a 1:14 scale layout, the 20Ft. Semitrailer kit brings container transport style into a detailed truck setup with a black anodised aluminium frame and a compact tandem-axle format. The 475 mm long chassis creates a clear, purposeful silhouette behind a tractor unit, while the 180 mm width and 135 mm height keep the proportions aligned with scale road-haulage scenes. The running gear combines swing axle suspension with flat springs, giving the underframe a more technical, model-engineered character than a plain static trailer base. Tyres with foam inserts add substance to the wheel setup and support a fuller tyre shape on the rims. Mechanical seat posts strengthen the parked semitrailer look at the front section and add another visible chassis detail for display or workshop scenes. The open kit format also leaves room for a container-focused build concept rather than fixing the trailer to a single body style from the outset. Coupled to a matching truck, the semitrailer suits freight yard layouts, road transport displays and scale driving sessions built around container handling themes. A suitable lamp set, 300056502, is available for builders who want to extend the trailer with matching light equipment. Age 14 Years

Models & trailers

1:14 3-Axle Flatbed Trailer III, trailer

€539.99

Heavy transport takes shape in 1:14 scale with the 3-Axle Flatbed Trailer III, a detailed kit built to pair with TAMIYA tractors. The long platform, solid front wall and multi-axle layout give the model the look of a working road trailer ready for oversized loads, machinery or palletised cargo. The chassis uses a laser-cut steel frame in 3 mm and 1 mm material, supported by a massive aluminium front wall and steel underride protection on the left and right sides. A bumper made from 8 mm aluminium adds another strong visual and structural element at the rear. The loading area measures 981 mm in length, with an overall width of 195 mm and height of 210 mm, giving the trailer a notably long deck in this scale. At 4,400 g, the assembled model carries a substantial presence on display and in convoy scenes. The new trailer suspension can be built at normal height or with the included +8 mm elevation, adding flexibility to the finished stance. The real wood deck surface and recessed fastening points suit scale freight setups, from construction loads to industrial transport scenes. Ball-bearing wheels support smooth rolling movement, while the spare wheel mounted in its steel holder strengthens the authentic commercial-trailer look. Age 14+ marks the recommended age. The trailer can also be expanded with separately available accessories, including a conversion kit with functional aluminium side walls for building-material transport.

Models & trailers

1:14 3-Axle Fliegl Megarunner, trailer kit

€634.99

Curtain-side trailers shape the look of modern road freight, and the 1:14 3-Axle Fliegl Megarunner brings that transport character into a detailed model-building project. The assembly kit captures the long, low stance of a European semi-trailer with a 995 mm length, a 195 mm height and a red curtain body that stands out clearly beside the white front and rear sections. The build centres on a laser-cut steel frame, steel front wall and 3-axle layout, creating a technical structure with the layered detail that model-building enthusiasts look for in workshop sessions. Along the sides, the curtain body is tensioned with multiple fasteners, while the rear section uses opening doors with a 270° hinge layout for a more authentic trailer finish. Half-round mudguards, a single-arm steel spare wheel carrier and aluminium underride protection add the kind of hardware normally seen underneath full-size transport equipment. The rear bumper carries a laser-cut Fliegl logo, and the wide tyres with chromed rims complete the road-going stance with a bright contrast against the darker chassis parts. On a shelf, in a depot scene or coupled to a 1:14 tractor unit, the trailer adds a strong logistics presence through its triple-axle proportions and curtain-side bodywork. The kit format makes the construction itself part of the appeal, with the manual included for step-by-step assembly.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Low Loader, trailer, gooseneck

€849.99

Heavy-haul trailers are defined by their proportions, and this 1:14 3-axle low loader captures that look with a long low-bed platform, a stepped gooseneck front section and a rear triple-axle group. The red frame, wood-look centre deck and black running strips create the technical contrast seen on full-size transport equipment, whether the trailer is coupled to a matching tractor unit or shown as a standalone workshop build. The construction goes beyond a simple shell. The manual shows 6 wheel assemblies with ball bearings, a multi-part frame with cross members in 74 mm and 81 mm lengths, and deck sections that lock into place across the chassis. Rear details such as warning boards, mudflaps, lights, hazard markings and LONG VEHICLE graphics build the road-going character of the model. The trailer also supports optional upgrades including a spindle drive gearbox motor, a control switch for the lifting mechanism, LED tail light boards, rectangular lights and an orange flashing beacon. On a finished 1:14 truck combination, the low central bed suits scale transport scenes with construction machines, agricultural vehicles or other oversized loads. The long deck and realistic rear section also make the model a strong centrepiece for shelf display, depot layouts and heavy-transport dioramas. Required separately are a gearbox motor for the lifting device and a control switch for manual lifting.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Semi-Trailer Ver.III, trailer

€689.99

The 1:14 3-Axle Semi-Trailer Ver.III recreates the long, enclosed form of a box trailer with a white body, red chassis and a detailed 3-axle layout that gives a truck combination a convincing road-going presence. Extended support legs at the front let the trailer stand detached, while the wide rear opening sets up loading scenes with the doors swung fully outward. Details across the chassis and body focus on the hardware that defines a working trailer. The side panels use a screwed sandwich-look construction, and the semi-circular mudguards frame the rear wheel area with a clean commercial-vehicle profile. At the back, an aluminum rear bumper carries 7-section taillights for a technical finish that matches the transport theme. A steel spare wheel holder with spare wheel adds another workshop-style detail to the underframe, and the manually adjustable aluminum trailer support legs underline the functional character of the model. Combined with a compatible 1:14 tractor unit, the trailer suits realistic freight setups, depot scenes and road-train display builds. Open rear doors, visible cargo space and the multi-axle chassis also make it a strong centrepiece for transport layouts focused on loading bays, yard parking and long-haul combinations. Age 14 years+  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Stanchion Trailer, logging trailer

€599.99

Built around a 1:14 scale and a 3-axle layout, this stanchion trailer brings the look of a dedicated timber hauler into a detailed model format. The red chassis, silver stanchions and black fenders create the unmistakable profile of a forestry transport trailer, with the long frame set up to carry elongated loads such as logs or poles in a convincing road-going arrangement. The structure develops through a multi-stage build with 6 wheel assemblies, ball bearings in the wheel hubs and 3 axle units mounted beneath the frame. The suspension uses a new design, and the axle build includes a choice between normal height and a raised +8 mm position. Dummy air suspension details add another layer of scale realism around the running gear. Side underrun guards, a rear bumper, rear light details and a front holder with front plate shape the trailer into a complete heavy-transport subject rather than a simple rolling chassis. On the bench or coupled into a 1:14 truck setup, the trailer suits display scenes centered on forestry, construction or long-load transport. Support legs hold the trailer upright when parked, while the front bulkhead and paired stanchions define the loading zones clearly for a purposeful finished look.

RC truck accessories

1:14 3-Chamber Taillight PCB, RC lighting set

€80.99

Compact rear lighting adds a sharper scale finish to 1:14 vehicle builds, and this 3-chamber taillight PCB set brings that detail into a small round format. With dimensions of 11 x 7.5 mm, the units suit model bodies and rear sections where lighting needs to stay visually balanced instead of overpowering the build. The PCB layout combines 3 light functions in each taillight: rear light, indicator and brake light. That function mix supports more lifelike signalling on trucks, trailers and custom conversions, while the round housing shape fits classic rear-end styling on many commercial vehicle projects. The set is designed for an input voltage of 7.2-12 V DC, making it suitable for RC electrical systems within that range. For model-building enthusiasts, this adds a focused electronics upgrade that contributes visible function as well as scale character. Installed on a 1:14 rig, the taillights help complete the rear view during workshop builds, restoration-style projects or detailed road-going truck scenes. The set is not compatible with TAMIYA MFC-01/03, so it is best matched with other suitable lighting layouts and custom electronics setups.

Models & trailers

1:14 3Axle Trailer Chassis Ver.III, trailer

€389.99

The 1:14 3Axle Trailer Chassis Ver.III captures the look of a heavy road trailer in a format shaped for model-building enthusiasts. Its laser-cut steel construction uses 3 mm and 1 mm sections, creating a rigid base chassis that suits custom builds and gives larger trailer bodies a defined structural foundation. The 3-axle layout brings the long proportions of a transport trailer into a scale setup that looks convincing behind a truck tractor. A new trailer suspension system is part of the chassis design, and the included +8 mm elevation option allows the running height to be adapted to the planned structure above. Wide chromed wheels with ball bearings and wide tyres underline the technical look while supporting smooth rolling movement. At the rear, an aluminium bumper with 7-section taillights adds another recognisable truck detail. The steel spare wheel holder with spare wheel extends the workshop-style equipment, while the semi-circular mudguards shape the wheel area with a clean trailer silhouette. As a basic trailer chassis for individual structures, this version leaves room for flatbed, transport or specialist body concepts built around the frame. On a shelf, in a workshop setting or coupled to a matching 1:14 tractor unit, the long red chassis and detailed under-run protection create a strong heavy-haul presence.

Additional accessories

1:14 Box Body Conversion Kit, model kit

€399.99

This 1:14 box body conversion kit reshapes the TAMIYA Volvo FH16 timber truck 300056360 into an articulated truck with a closed cargo body. CNC-milled aluminium parts form the main box structure, while the combination of metal sections and panelled surfaces gives the finished build a purposeful commercial-truck character. A sheet steel subframe, laser cut and CNC bent, is included for mounting on the chassis and creates the structural link between the conversion and the base vehicle. The side sections use screwed plastic panels in a sandwich layout, which adds visible layering to the bodywork instead of a plain flat-sided shell. At the rear, the loading doors are carried on aluminium hinges with a 270° opening angle, allowing the opening mechanism to be shown clearly on the completed model. Magnetic locking keeps the doors closed when the body is in running or display condition. The assembled body measures 545 x 195 x 195 mm and weighs 3,200 g. As a model kit, this conversion suits hobby builds that focus on reworking an existing truck into a different transport configuration. The box body changes the visual character of the Volvo FH16 from timber hauler to enclosed freight carrier and adds a substantial new body section for workshop assembly and finishing.

RC truck accessories

1:14 Chrome Bumper MB 1838/1850, truck part

€12.49

Classic truck styling often comes down to the front details, and this 1:14 Chrome Bumper MB 1838/1850 adds a bright plated accent to compatible model builds. Designed as an accessory for Mercedes Benz truck models 56305 and 56307 from Tamiya, it brings the specified MB 1838/1850 look to the front section in a format matched to 1:14 scale projects. The bumper is made from chromed material and focuses on exterior appearance rather than a generic replacement look. Its shaped front profile and integrated mounting points are intended for the named compatible truck models, which keeps the fitment use clearly defined in the product data. The included fixing hardware consists of 2 black screws, giving the set the essential parts needed for installation. As a model accessory in the Models Supplies range, it suits detail-focused truck projects where the front end finish plays a visible role in the overall build. On a workshop bench, the plated surface adds contrast against painted cab parts and darker chassis components. In a display setting or as part of an active RC truck build, the bumper helps complete the characteristic road-truck appearance associated with the MB 1838/1850 designation.

RC chassis & attachments

1:14 Clearance Lights, model accessory, 2 pcs

€11.49

Marker lights are a small detail with a big visual role on scale trucks, and this 1:14 clearance light set brings that road-going look into a model build with red and amber lenses. The set contains 2 pieces and is listed as a model accessory for hobby use. Its compact format suits detailing work where edge markers help define the outline of a cab, body or trailer in scale form. The red and amber colour combination follows the stated design and creates a clearer visual break between body panels and fitted trim. As a separate accessory, the set can support a fresh build, a repair, or the replacement of existing marker parts where the original look needs to be restored. The 1:14 scale keeps the proportions aligned with matching model projects rather than forcing an oversized lighting detail into the build. On the bench, the set fits naturally into finishing stages where small exterior parts shape the final appearance. In display use, the coloured markers add another layer of realism to trucks and trailers that rely on visible body details rather than large mechanical changes alone.

RC truck accessories

1:14 Clearance Lights, model accessory, 2pcs

€11.49

Marker lights are a small detail with a strong effect on the finished look of a scale vehicle, and this 1:14 clearance light set brings that effect into model builds with a red and white 2-piece layout. The compact format suits focused detailing work on truck and trailer bodies where visible light points help define the lines of the model. The set is listed as a model accessory and is aimed at hobbyists from 14 years. Red and white light elements open up classic placement options on body edges, upper sections or rearward areas, depending on the build concept and the styling of the vehicle. Because the pack contains 2 pieces, the set works well for selective upgrades rather than broad full-body outfitting. That makes it a useful choice for custom projects, replacement work or finishing touches on a scale body that still needs clearly placed marker-light details. On the workbench, the accessory can be integrated into truck, trailer or other 1:14 modelling projects where small exterior parts shape the overall impression. In display use or during driving sessions, the added light housings help the bodywork read with more scale definition and a more complete road-going look.

RC truck accessories

1:14 Day Running Light Actros 2/3 Axle

€65.99

The MB Actros remains one of the defining shapes in modern long-haul trucking, and this 1:14 daytime running light set brings that road-going character into a scale build with a model-specific front lighting detail. Made for MB Actros 2/3 Axle models, the set focuses on the visual signature at the front end and adds a cleaner, more technical look to the truck body. The accessory is designed as a paired lighting set with wired left and right units, matching the mirrored layout needed for the vehicle front. Its 7.2 to 12 V/DC input range gives clear electrical guidance for integration into compatible RC truck systems. The compact housings are shaped for installation as dedicated light components rather than as generic decoration, which makes the set especially relevant for builders refining the appearance of an existing model or replacing front lighting parts with the correct format. On a workshop bench, during a rebuild, or as part of a scale detailing session, this lighting set adds a focused upgrade to the MB Actros 2/3 Axle platform. It suits display-oriented finishing as well as active RC truck projects where the front-end layout matters as much as the driving setup.

RC truck accessories

1:14 Draw Tube Pole Trailer, model accessory

€89.99

This 1:14 Draw Tube Pole Trailer accessory set brings a functional trailer detail into model-building projects with a long cylindrical draw tube, a rectangular silver housing section and an angled mounting plate with 4 round holes and 2 elongated slots. The layout reads as a dedicated add-on for scale truck or trailer work, with each part focused on mounting, alignment and visible structure rather than decoration alone. Alongside the main tube section, the set includes 2 small silver detail parts, a black bracket and a bag of black and silver screws for the fitting work. The combination of slotted and round mounting points supports careful positioning during assembly, while the separate hardware keeps the installation tied to the mechanical character of the build. A red transparent 2-part light piece and a clear lens frame extend the set beyond the structural section, adding a realistic rear-end detail that complements the metallic-looking components. 14 Years is the stated age marking. On a workshop bench, the parts suit upgrade, replacement or custom trailer projects where a scale-correct extension section matters as much as the finished look. Assembly time is stated in minutes, and batteries are not included.

Models & trailers

1:14 Dump Trailer 2/3 Axle, model kit

€619.99

Built for model truck scenes with real working character, this 1:14 dump trailer model kit brings the look of a construction-site semi-trailer into a detailed three-axle format. The combination of a CNC-milled aluminium chassis, reinforced PVC basin and back wall, and a lightened licence plate mount gives the trailer a technical, workshop-style finish that suits display builds and active driving alike. The running gear uses GFK suspension with horizontal rods, 12 ball-bearings, 6 wide rims and 6 wide tyres with a width of 25 mm and an outer diameter of 82 mm. Air-spring dummies with screw springs add another layer of scale detail to the undercarriage, while plastic fenders with mounts frame the wheel setup cleanly. The aluminium underbody protection and the CNC-milled support construction continue the metal-focused build, and the mechanically adjustable trailer supports add a functional detail at standstill. With a length of 700 mm, width of 185 mm, height of 235 mm and a weight of 4,600 g, the trailer has substantial presence in a 1:14 truck setup. For unloading scenes, the basin can be equipped with a separately available dump mechanism. A spindle drive, motor, battery and switch are required separately. Once fitted, the raised basin and automatic rear locking create a convincing loading and unloading sequence for sand, gravel or stone in construction layouts, quarry scenes or truck meeting displays.

Models & trailers

1:14 Fliegl Stone Master, tipper trailer

€749.99

Current half-pipe tippers are defined by fast unloading and a hard-working silhouette, and the 1:14 Fliegl Stone Master brings that character into a detailed 3-axle trailer kit. The licensed model combines a steel chassis frame with a steel tipper body and rear wall, creating a substantial build with the long, purposeful proportions of a site trailer. The chassis uses laser-cut and laser-welded 1 mm and 3 mm steel parts, while the tipper and hatch door are formed from 2 mm steel with a CNC-bent profile. Across the running gear, 12 ball bearings sit inside the 6 wheel assemblies for smooth rolling action. The trailer suspension is detailed with air spring dummies, and the rear section carries a 7-section taillight layout, a licence plate bracket and a square steel rear underride guard. Semi-circular mudguards, a king pin, an ABS operating platform and a hydraulic cylinder dummy add further scale detail without crowding the lines of the body. The 7-section rear light cluster can be electrically retrofitted. With dimensions of 700 x 185 x 250 mm and a load figure of up to 10 kg, the trailer has the size and carrying capacity to suit construction layouts, transport scenes and scale hauling setups. The body can be tipped and unloaded with the separately required tipping mechanism. A spindle drive, motor, battery and switch are required separately.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 Goldhofer BAU STN-L3, low loader kit

€584.99

Heavy-haul transport has a distinct presence in scale form, and the Goldhofer BAU STN-L3 brings that character into a 1:14 low loader kit with a long 1000 mm body, a width of about 200 mm, and a height of 270 mm. The laser-cut, hard-soldered steel profile construction gives the trailer its technical look, while the plateau with tailgate extends the transport layout for detailed truck scenes. The build centres on mechanical functions that suit model-building enthusiasts. The split folding loading ramps are arranged in 3/4 and 1/2 sections and can be folded down by hand for driving operation. A ramp length of 290 mm in the raised configuration is stated in the data. Three rear axles carry twin tyres, and the axle area is detailed with dummy air springs for a scale heavy-duty appearance. Ball bearing mounting supports the running gear, and the 7-chamber taillights can be retrofitted electrically. All columns are mechanically adjustable, and the front support area can be expanded with optional E-support legs. The trailer fits all Tamiya trucks, making it a strong match for detailed tractor units in 1:14 truck layouts. On a workshop bench, in a transport diorama, or coupled for slow manoeuvres with scale cargo, the low deck, upright ramp geometry, and multi-axle layout create the look of a working heavy equipment hauler. Age 14 Years  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 Goldhofer TU4, lowloader trailer, 4-axle

€694.99

Heavy-haul lowloaders are built to move machinery that sits too tall or too heavy for a standard trailer, and the Goldhofer TU4 captures that purpose in a long 1:14 scale platform with a distinctly low deck and 4-axle layout. This kit uses laser-cut steel sheet parts to create the frame and structure, giving the model a technical build with the look of a real transport trailer. The deck is finished with wood supports that break up the steel construction with a realistic loading surface, while 16 ball-bearing wheels add a dense multi-axle stance under the chassis. At the rear, the support can be adjusted manually, and the one-piece ramps connect through a hinged mechanism that allows different loading positions. The underframe includes spacers, semicircular fenders and a pivoting bogie arrangement, adding more mechanical detail during assembly than a simple display trailer. Decals are included for markings and finishing touches, so the completed model carries the visual character of a working lowloader rather than a plain platform. Coupled behind a matching 1:14 tractor unit, the trailer suits workshop display, transport dioramas and scale loading scenes with construction or agricultural vehicles. Age 14 Years. Assembly instructions are included.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:14 LED Board Side Volvo FH16, model accessory

€18.99

The Volvo FH16 is one of the defining names in modern long-haul truck design, and this 1:14 LED Board Side brings that road-truck character into a scale model build through a dedicated lighting accessory. As a model supply rather than a complete vehicle, it focuses on one specific visual area of the truck and adds a more defined illuminated presence to the side section. The product data identifies this part as a 1:14 LED Board Side Volvo FH16 2A, placing it in the models and accessories range and specifically in model supplies. That makes it a fitting choice for hobby projects built around scale truck detailing, where separate lighting components help shape the final appearance. The 2A designation is part of the stated name and helps distinguish this version within the range. Batteries are not included. The age marking is 14 Years. In a workshop setting, this accessory supports focused upgrade work on a Volvo FH16 scale truck, especially where lighting details are part of the planned finish. On a display shelf or during model operation, an LED side element can strengthen the visual definition of the body layout while keeping the build aligned with the stated 1:14 scale.

RC truck accessories

1:14 Lift Axle, conversion kit, trailer upgrade

€99.99

A lift axle is a defining detail on many full-size trailers, and this 1:14 conversion kit brings that function into a scale workshop project for CARSON 3-axle trailers of the II and III generation. Built for one trailer axle with dummy air suspension, the set converts it into a working lift system with a clearly visible axle movement of about 6 mm. The mechanism is driven by a digital servo and uses an aluminum servo mount, an aluminum servo horn, new mounting brackets, air bellows and mounts, plus a steel lift mechanism to create the lifting action. Mounting hardware is included for the installation. A suitable servo with at least 10 kg torque is required separately; comparable dimensions are 40 x 20 x 38 mm. The kit is compatible with Fliegl Megarunner, Stake trailer III, Flatbed trailer III, Trailer chassis III, Building materials trailer III, Box trailer III, and all 2nd generation trailers. Installation in tipper models is not possible. On a finished trailer, the raised axle changes the stance in a way that looks closer to a working road-going combination. In the workshop phase, the conversion adds a focused mechanical upgrade that suits model-building enthusiasts who enjoy functional trailer details as much as the final appearance.

RC truck accessories

1:14 Metal Front Axle, model part, steering

€19.99

A front axle defines both the stance and the steering layout of a scale truck build, and this 1:14 metal front axle with steering linkage brings those two core elements together in one dedicated model part. The metal construction gives the assembly a clearly specified material base for workshop use, while the included linkage ties the axle directly to the steering function named in the designation. Within a 1:14 build, a front axle is more than a visual detail: it is the component group that shapes how the front end is assembled and how the steering hardware is organised. This version is supplied as a front axle with steering linkage rather than as an isolated single piece, which helps keep the relevant steering section together for replacement or planned parts work. The designation identifies it as a model supply within the models and accessories range, making it a focused choice for maintenance benches, rebuild projects or scale-oriented truck assemblies. The age marking is 14 Years. Whether the task is replacing a worn front-end assembly, preparing a fresh chassis project or refining a detailed 1:14 vehicle, this axle fits naturally into hands-on hobby work. It suits model-building enthusiasts who value clearly defined components and a steering assembly that is named upfront in the specification.

RC truck accessories

1:14 MFC-TLS IR Low Loader, control unit

€84.99

Built for 1:14 truck modelling, the MFC-TLS IR Low Loader control unit extends TAMIYA MFC-03/01 with infrared signal transfer to a matching trailer setup. The module sends lighting and auxiliary commands from the tractor unit to the trailer, creating a clean functional link for low loader combinations with steerable axles. Power is supplied via the receiver at 5-7.4 V/DC, so the module integrates into an existing radio-controlled electronics layout without a separate power source stated in the data. Rear light circuit boards for 3-chamber or 6-chamber taillights connect through screw terminals, and each of the 7 outputs supports loads of up to 500 mA. That layout also leaves room for additional lamps such as marker lights, roof lights or wind deflector lights, which are switched through the parking light function. The package contents include the MFC IR transmitter module, an IR transmitting diode and a 5-pin cable set. In a detailed truck and trailer build, the unit supports coordinated light behaviour and extra driven functions across the combination. The control paths also cover steering-related trailer functions, making it suitable for low loader setups where steerable axles add a more involved operating sequence. Recommended age: 14 years. The TLS low loader control unit 500907712 is optionally required for the trailer.

RC truck accessories

1:14 Scania 770 Roof Lights, model accessory

€16.49

The Scania 770 stands out on the road with its tall cab format and strong front-end presence, and this 1:14 roof light board brings that character into a scale truck build with a focused lighting detail. Designed as a model accessory, it places 5 LED roof lights across the upper cab area to create a more defined silhouette on the finished Scania 770. The one-piece board format groups the 5 lights into a single roof-mounted assembly, which helps keep the layout consistent across the cab line. As a 1:14 accessory, it is shaped for scale modelling work where body styling and truck-specific detailing matter as much as the main chassis. The LED configuration adds a technical accent to the upper section of the model and gives the roof area a clearer visual structure than an unadorned cab top. The Scania 770 reference keeps the styling tied to a named truck subject rather than a generic lighting add-on. On the bench, the light board fits naturally into a detailed truck project alongside cab finishing and exterior upgrades. In display use or during scale driving sessions, the 5-light arrangement gives the model a more distinctive roofline and a stronger long-haul truck character.

RC truck accessories

1:14 Scania 770S Front PCB, truck lighting

€189.99

Modern long-haul trucks rely on their front light signature as much as on grille shape, and the Scania 770S is one of the clearest examples of that design language. This 1:14 front PCB lighting set translates that look into a dedicated lamp assembly for the TAMIYA Scania 770S, combining reflector detailing with functional illumination for a more authentic scale finish. The set is built around 2 matching front light modules with integrated wiring and PCB-based electronics. Each housing contains 16 LEDs, arranged to reproduce the reflector structure with a more realistic visual depth than a plain lamp insert. The lighting functions include daytime running light and side position light, adding separate illuminated zones that sharpen the truck's front profile. The specified input range of 7.2 to 12 V DC suits RC truck electrical systems in this class and gives clear compatibility guidance for installation planning. Mounted on the model, the lamp units bring more definition to the front corners, whether the truck is standing in a workshop-style display or running on an indoor course. For 14 Years and up, this accessory adds a technical finishing step that suits hobby builds focused on scale detail and working light functions.

RC truck accessories

1:14 Scania 770S LED Board Side, model part

€31.99

This 1:14 side LED board set is made for Scania 770S model builds and brings a defined lighting component to the truck's side sections. With 2 matching boards in the set, the layout suits symmetrical installation and gives the model a more complete illuminated appearance. The designation names a 3A specification, adding a concrete electrical reference for integration into a compatible lighting setup. As a dedicated model accessory rather than a complete vehicle, the set focuses on one specific area of the build and supports more detailed finishing work on a Scania 770S project. The side board format helps separate this component from front or rear lighting elements and makes it easier to plan placement within a larger 1:14 truck configuration. In a workshop setting, the pair can be fitted during a fresh build or used to refine an existing Scania 770S model with added side illumination. The clearly defined scale and vehicle reference also make the set a focused choice for hobbyists working on truck detailing with matching 1:14 components.

RC truck accessories

1:14 Scania 770s LED Board, model accessory

€32.49

The Scania 770 S belongs to the latest generation of long-haul trucks, known for its bold front design and strong road presence. This 1:14 LED board is made for that look in model form, adding a defined lighting element to the front area of a Scania 770s build. The accessory is specified as a 4+3 front LED board, giving model-building enthusiasts a clear layout for cab detailing rather than a generic light part. In a 1:14 truck project, details at the grille and roofline shape the whole character of the finished replica, and this board focuses attention on that upper front section. The Scania 770s designation keeps the part tied to a specific subject, which matters when a build is planned around the lines and proportions of one truck model. As a model accessory rather than a complete vehicle, it suits hobby benches where selected parts are added step by step to develop a more individual finish. Whether the goal is a shelf display, a show-style truck replica, or a running 1:14 build with extra visual definition at the front, this LED board adds a distinct custom element. The compact format also makes it a useful choice for targeted upgrades where one visible detail can change the overall impression of the cab.

RC truck accessories

1:14 Scania 770S Positionlight Set, LED kit

€85.99

The Scania 770S is known for its bold front-end presence, and this 1:14 position light set translates that character into a dedicated LED upgrade for scale truck builds. With 21 LEDs and support for 7.2 V and 12 V systems, the set is aimed at model-building enthusiasts who want to add a more intricate lighting layout to a Scania 770S project. The wiring harnesses are arranged for several mounting points around the truck body, with light outputs assigned to roof lamps, side skirt position lights and multiple front lighting locations. Alongside the roof position lamps with high beam function, the set also covers 5 lightbar pods, a bumper lightbar and an auxiliary light in the radiator grille. This spreads the illumination across upper, central and lower sections of the cab, giving the model a more structured and realistic light distribution once installed. The prewired LED lines also support neat routing through a detailed truck build where cable placement matters as much as the finished effect. On a display shelf, in a workshop build, or during powered running sessions, the set adds visible definition to the Scania 770S bodywork and helps separate the truck's key styling zones through light placement. The set is not compatible with TAMIYA MFC-01/03.

RC truck accessories

1:14 Steel Drive Shaft 47-57 mm, model part

€17.49

A steel drive shaft in 1:14 scale format brings a core drivetrain component to compatible model vehicle builds. The stated 47-57 mm length range defines the working span clearly, making this part relevant wherever that exact distance is needed between connected drivetrain points. As a model accessory in the Models & Accessories range, this shaft is aimed at repair, replacement, or planned drivetrain setup work rather than decorative use. The steel construction places the focus on a metal transmission part for hobby applications, and the compact 47 mm to 57 mm specification gives a concrete reference when matching an existing assembly. With a minimum age marking of 14 years, the part sits in a hobby context shaped by model-building and technical maintenance. The designation itself keeps the function straightforward: drive shaft, steel construction, 1:14 scale reference, and a defined length window. On the workbench, this kind of spare part supports routine servicing of compatible RC models, whether an existing shaft is being replaced or a drivetrain layout is being completed with the required size. It also fits neatly into a stocked parts assortment for ongoing maintenance of 1:14 vehicle projects.

RC truck accessories

1:14 Steel Drive Shaft 55-67 mm, model part

€17.49

This 1:14 steel drive shaft is a focused drivetrain part for model-building enthusiasts working on compatible vehicle setups. With a stated length range of 55-67 mm, it covers a clearly defined fit window for installations that call for this span between connected drivetrain points. As a models supply component, the shaft belongs in repair, maintenance and parts replacement work where the original drivetrain hardware needs a matching steel spare. The 1:14 designation places it within scale-specific model applications rather than as a general workshop part. Steel construction keeps the material statement precise and relevant for a component that sits within the drive system. The 55-67 mm format gives a concrete reference for checking fit against an existing assembly before installation. Age marking: 14 Years. On the hobby bench, this part suits rebuilds after wear, planned drivetrain servicing or a fresh parts stock for compatible 1:14 models. In running fleets that stay active over repeated sessions, a correctly sized replacement shaft helps keep maintenance work targeted and scale-specific.

RC truck accessories

1:14 Steel Drive Shaft, model part, 75-100 mm

€17.49

This 1:14 steel drive shaft is a dedicated drivetrain part for model assemblies that need an adjustable connection length from 75 to 100 mm. The steel shaft brings a clear mechanical role into the build, linking compatible drivetrain points within that stated span and supporting a precise, component-led setup. In a 1:14 model context, the 75 to 100 mm format gives room for installations where the distance between connected parts is not fixed to a single length. That makes the shaft relevant for replacement work as well as for fresh assemblies built around matching dimensions. The steel construction keeps the focus on the part's intended function as a drivetrain link rather than a decorative add-on. With the age marking of 14 Years, the part sits in a hobby-focused model range shaped around detailed builds and technical component choices. Whether used to replace a worn drivetrain link or to complete a compatible 1:14 project, the shaft fits naturally into workshop-style model building sessions. It suits hobby benches where measured component selection, matching dimensions and drivetrain layout all matter to the finished assembly.

RC truck accessories

1:14 Steering Axle, truck accessory, steel

€99.99

In 1:14 truck building, the steering axle shapes how the whole front end responds on the road. This pre-assembled front axle combines a hardened steel center section, hardened steel steering knuckles and aluminum linkages into a ready-to-install unit for TAMIYA truck models. The axle body forms the core of the assembly, while double plain-bearing-mounted steering knuckles support precise steering movement at each side. A steel tie rod with left- and right-hand threads allows fine tracking adjustment directly at the linkage, which helps dial in the front end with more control during setup. Backlash-free M3 ball joints transfer the steering motion through the system with accurate, direct action. The combination of steel load-bearing parts and aluminum linkages gives the assembly a focused mechanical layout built around steering precision. Installed on compatible TAMIYA truck chassis, the axle suits fresh builds, rebuilds and targeted front-end upgrades where exact steering response matters. The ready-for-installation format also keeps workshop time focused on fitting and setup rather than on assembling the axle itself.

RC truck accessories

1:14 Strobe Light orange, model accessory, 2 pcs

€45.99

Amber warning lights are a familiar detail on working trucks, and this 1:14 strobe light set brings that look into a model build with 2 compact light units. Each housing measures 11.5 x 4.5 x 2.5 mm, giving the set a small footprint that suits scale installations where lighting needs to stay in proportion to the bodywork. The lights are designed for 7.2-12 V DC input and come as orange strobe units for model electrics in that voltage range. The image shows slim silver housings with attached wires, a layout that supports installation on body sections, roof areas or accessory bars where a separate warning-light detail is needed. Compatibility with the 500907633 beacon light bar set makes this set a focused extension for existing 1:14 truck lighting projects rather than a generic decoration. Used on a show truck, service vehicle or detailed working rig, the 2 strobe lights add a distinct visual accent that sharpens the scale appearance. In custom builds, restorations or lighting upgrades, the compact format leaves room for precise placement while the amber colour reinforces the look of real commercial vehicle warning equipment.

Basic accessories

1:14 Towing bar Low loader, model accessory

€26.99

This 1:14 towing bar for the Low loader adds a defined structural part to scale model work, with a black moulded form that follows an A-shaped layout and integrates reinforcing ribs across the frame. The geometry shown in the part itself points to a mechanical connection role, with 1 circular mounting eye on one end and 2 cylindrical mounting points on the other for placement in the intended assembly. As a dedicated model accessory in the Models & Accessories range, the part suits replacement work, maintenance tasks or the completion of an existing 1:14 Low loader setup. The ribbed structure gives the component its formed profile, while the open triangular shape keeps the connection points clearly accessible during fitting. For hobby projects where the correct shape matters, a scale-specific part like this helps keep the model configuration consistent with the intended layout. The 14 Years age marking places the towing bar in the hobby segment rather than in early-play ranges. It fits naturally into bench work focused on repair, parts management and scale vehicle upkeep, whether the aim is to replace a worn component or keep a matching spare ready for later use.

Models & trailers

1:14 Trailer Chassis 20/40ft.Cont., trailer

€399.99

Built around a CNC-milled aluminium frame with a black anodised finish, this 1:14 Trailer Chassis 20/40ft.Cont. brings container transport into a detailed scale format with a long 915 mm silhouette and a purposeful commercial-vehicle look. The 190 mm width and 140 mm height give the chassis a low, stretched profile that sits naturally behind a matching tractor unit in workshop, display or driving scenes. The 3-axle layout is paired with swing axle suspension and flat springs, so the undercarriage carries visible mechanical depth as well as articulated movement. Wide-base tyres with foam inserts add body to the running gear, while chrome-plated rims sharpen the road-going finish. Mechanical seat posts extend the functional trailer character beyond surface styling, and the changeable container fastening allows the chassis to be set up for 20 ft or 40 ft container formats. Age marking: 14 years. Behind a tractor unit, the long frame and multi-axle arrangement create the look of a working freight combination with clear transport focus rather than a generic road trailer. The chassis suits model-building enthusiasts who enjoy realistic commercial vehicle themes, detailed underframe construction and scale scenes centred on loading, hauling and depot movement.

Basic accessories

1:14 Trailersus. 8mm Lift, trailer axle parts

€29.99

A 1:14 trailer model gains a more technical underbody look with this Trailersus. set and its 8 mm lift layout. Created for retrofitting existing trailer axles with dummy air springs, the set brings the suspension area closer to the visual character often sought in detailed truck and trailer builds. The package contains the necessary moulded parts and 2 air bellows for the conversion. It is intended for use with dummy air springs 500907069, while the metal parts and the assembly material are reused from the existing axle. That setup keeps the focus on the suspension components that change the appearance of the axle assembly, rather than replacing the complete axle hardware. The black moulded parts suit workshop-style builds, restoration projects, and scale trailer customisation where the axle zone is meant to look more complete. One set is required for each trailer axle, which helps when planning a single retrofit or equipping several axles on a longer trailer. The 14 Years marking is stated in the product data. In a display build or a running truck-and-trailer combination, the conversion adds a more model-focused finish to the area beneath the trailer body.

RC truck accessories

1:14 UNI-TLS IR, transmitter unit, low loader

€84.99

Heavy-haul trailer functions become far more precise with the 1:14 UNI-TLS IR transmitter unit, built to connect an existing lighting system to the CARSON TLS low-loader control setup. The module sends both lighting and auxiliary commands to the trailer via infrared, creating a clean control link for complex low-loader operation. Designed for third-party use, the unit expands a 1:14 electronics layout with a focused set of control options for articulated transport models. The infrared transmitting diode forms the signal bridge to the trailer control unit 500907712, which is required separately for trailer control. Alongside standard light commands, the system supports additional switching tasks for functions such as a gooseneck section, electric supports, ramp drive or steerable trailer axles. Operating voltage is 5-7.4 V DC, and power is supplied directly via the receiver. Scope of delivery includes the UNI transmitter module, IR transmitting diode, 10-pin cable set and instructions. In a workshop-style build or an active driving layout, the module suits model hauliers who want trailer lighting and moving low-loader functions to respond through one coordinated infrared link. It fits especially well into detailed truck and trailer combinations where realistic control of transport equipment matters as much as the tractor unit itself.

RC truck accessories

1:14 Warning Signs LED TLS, trailer accessory

€54.99

Heavy haulage details make the difference on a scale build, and these 1:14 warning signs bring that look into the trailer setup with illuminated red and white SMD LEDs. The set contains 4 warning signs ready to connect, adding a functional lighting element that suits low-loader scenes and transport-focused model layouts. The pre-wired power circuit board keeps the electrical side straightforward and is designed for direct connection to the TLS low-loader control unit 500907712. Installation uses the existing mounting points on the CARSON gooseneck low-bed trailer 500907700, which keeps the fit aligned with the intended trailer platform. Each sign measures 21 x 21 mm with a width of 71 mm, giving the assembly a compact scale presence. The extendable construction can be moved in or out by loosening the screws, so the sign position can be adapted to the width of the load. Mounted on a low-bed trailer, the illuminated signs add a convincing finishing touch to heavy transport combinations in workshop builds, display setups, and driving sessions. The 5 V/DC operating voltage matches the stated electrical specification for integration into the TLS system.

Tyres & rims

1:14 Wheel Wide Trailer Wheels, Chrome Rims

€26.49

Chrome truck rims are a classic detail on full-size road trailers, and this 1:14 wheel set brings that look into a scale build with a wide format made for trailer use. The set includes 2 wide trailer wheels with a chrome finish, giving compatible models a brighter, more defined wheel appearance on the axle. The wheel design is intended for CARSON-MODEL SPORT trailers and suits rebuilds, replacements or visual upgrades where the running gear needs a fresh matching look. Each rim is specified for use with 5 x 11 x 4 mm ball bearings, which gives the assembly a clear bearing standard for fitting and maintenance. The wide profile supports the visual character expected from scale transport trailers, while the chrome surface, vent openings and shaped hub area add mechanical detail that stands out on the undercarriage. As an accessory part rather than a complete vehicle, the set focuses on wheel appearance and fit within an existing trailer setup. Mounted on a scale trailer, the 2 matching rims suit workshop-style rebuilds, custom transport combinations and replacement jobs after regular running. In display scenes or on the road behind a truck tractor, the chrome finish gives the trailer axle area a more authentic heavy-duty look.

RC tractors

1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor

€84.99

The DEUTZ-FAHR 8280 TTV is recreated here as a 1:16 RC tractor with a detailed body, realistic driving functions and a strong farm vehicle presence. At 400 mm long, 180 mm wide and 234 mm high, the model carries the proportions of the original into a format that suits both active driving and shelf display. The ready-to-run set includes the tractor, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 transmitter batteries. Engine sound and horn add direct control inputs beyond steering and throttle, giving each run a more lifelike operating feel. The licensed DEUTZ-FAHR design is supported by cab details, body shaping and the characteristic tractor layout. With 5 frequency channels, the radio system provides stable control for solo driving sessions. Driving time reaches up to 90 minutes, allowing longer runs before recharging. On the floor at home, along a garden path or across lightly uneven ground, the compact dimensions and rigid axle help the tractor stay composed as it changes direction and tracks through tighter sections. Age 8 years+ marks the recommended age for use.

RC tractors

1:16 Deutz-Traktor 8280TTV, RC tractor

€109.99

The Deutz-Traktor 8280TTV in 1:16 scale brings agricultural RC driving into a compact format with a matching trailer and a fully equipped ready-to-run setup. The model uses a 2.4 GHz remote control system and arrives with the drive battery, USB charger and 2 x LR03 AAA transmitter batteries, so all core components for operation are already in the box. Its 7.4 V system pairs with a 500 mAh Li-Ion battery to deliver up to 90 minutes of operating time, giving the tractor enough endurance for repeated hauling runs, careful reversing and steady trailer work. The trailer adds a second handling element to each session, since turns, alignment and positioning need more control than a single vehicle on its own. With 5 frequency channels available, the radio setup supports controlled input during forward runs, direction changes and tighter manoeuvres. The ready-to-run format keeps the focus on driving rather than sourcing the basic operating equipment separately. On the floor, the tractor and trailer combination suits routes with bends, loading-play setups and repeated parking tasks where the longer overall shape changes how each turn is approached. The 8+ age marking fits a model that combines vehicle control, trailer guidance and battery-powered runtime in one clearly structured RC format.

RC diggers

1:16 Volvo L260H, wheel loader, 100% RTR

€369.99

The Volvo L260H is one of the best-known wheel loaders on large construction sites, and this 1:16 RC version brings that machine character into a fully functional ready-to-run format. At 530 mm long, 204 mm wide and 212 mm high, the model carries the broad stance and working proportions of the original into a format that gives the bucket action real presence. The 4110 g wheel loader combines scale detail with a drivetrain built for active operation. A battery holder sits under the engine hood, keeping the 7.4 V 1500 mAh Li-Ion drive battery neatly integrated into the body. The detailed driver's cabin includes an opening door, adding another layer of realism to the exterior. Sound and light functions extend the machine feel during operation, while the true-to-original wheel loader tyres match the construction styling with a tread pattern suited to the model's working look. The radio system uses 2.4 GHz technology and 10 channels for precise command input across the loader's driving and function controls. Running time reaches 60 minutes, giving the model enough time for longer loading sequences, repeated manoeuvres and display-worthy driving sessions. On a floor, paving or a compacted play surface, the combination of scale dimensions, functional bucket action and machine-style steering creates a focused RC construction experience.  Warning! Not suitable for children under 14 years.

RC cars

1:24 Aston Martin Vantage, RC car, 2.4 GHz RTR

€24.99

British sports car character meets compact radio control in this 1:24 Aston Martin Vantage. The licensed body combines a low coupe profile with front and rear LED lighting, creating a distinctive presence on indoor courses and evening driving sessions. At 195 mm long, 80 mm wide and 49 mm high, the model keeps a small footprint that suits quick direction changes and easy placement on home tracks. The 172 g weight supports agile handling, while the rear differential helps the driven axle work smoothly through bends instead of pushing wide. Fine steering adjustment gives the control system a more exact response, so short corrections and tighter corner entries feel deliberate rather than abrupt. The 2.4 GHz remote control system allows interference-free operation, which is especially useful when several RC models are running in the same area. A 3.7 V 500 mAh Li-Ion drive battery powers the car, and the set includes a USB charger for straightforward charging between runs. As a 100% RTR set, the RC car comes with the model, remote control, drive battery, charger and 2 x LR03 AAA transmitter batteries, so driving can start without extra setup beyond charging. The fast, manoeuvrable layout and realistic sports car look make it equally suited to short sprints across smooth floors, improvised living-room circuits and relaxed display breaks between runs.

Mini RC cars

1:32 Volkswagen Beetle, RC car, 2.4 GHz RTR

€19.99

The Volkswagen Beetle remains one of the most recognisable car shapes ever built, and this 1:32 RC version translates that silhouette into a compact off-road runner with a bold lifted stance. At 135 mm long, 85 mm wide and 85 mm high, the ready-to-run model combines classic Beetle lines, oversized treaded tires and red LED underbody lighting for eye-catching driving sessions at home. The interference-free 2.4 GHz radio system supports precise control, while the 3.7 V 500 mAh Li-Ion drive battery delivers up to 60 minutes of runtime per charge. A weight of 273 g keeps the model easy to handle and quick to redirect through narrow spaces. The included Volkswagen license ties the body design to the named vehicle, and the compact proportions suit tabletops, smooth floors and improvised obstacle routes. The handheld controller and USB charger are included in the set, keeping the focus on driving rather than extra setup. Short bursts across the living room, figure-eight turns around chair legs or evening laps with the red underglow all suit this small-scale RC car. The fully assembled format also makes it easy to move from charging to driving whenever a quick session fits the day.

Mini RC cars

1:50 Nano City Crane Truck, RC truck, 2.4 GHz

€18.99

Construction crane trucks bring compact utility engineering into motion, and this 1:50 Nano City Crane Truck translates that character into a radio-controlled format with a realistic crane truck appearance, a detailed driver's cab and LED lighting. At 135 mm long, 60 mm wide and 90 mm high, the model fits neatly into indoor driving spaces while still carrying the proportions and working look of a mobile crane vehicle. The interference-free 2.4 GHz remote control system supports precise handling across the truck's compact 146 g format, making short direction changes and careful positioning easy to manage. A 3.7 V Li-Ion drive battery with 500 mAh capacity powers travel times of up to 40 minutes, and the included USB charger keeps the rechargeable setup straightforward. The crane tower can be rotated manually through 360°, while the outriggers can be adjusted manually in both height and length to change the truck's stance for different scenes. That combination suits floor-based routes, desk-edge manoeuvres and small construction layouts where the truck can drive into place, extend its supports and turn the crane into position. With the ready-to-run model, remote control, battery, charger and instructions included, the set focuses on compact RC driving with a functional crane feature and a strong city-service look.

Mini RC cars

1:50 Nano City Fire Truck, RC car, 2.4 GHz

€18.99

Fire engines with access platforms bring a distinct presence to any city scene, and this 1:50 Nano City Fire Truck translates that character into a compact RC format. The 135 mm vehicle combines radio-controlled driving with a manually operated crane tower, creating movement on the ground and a second action point above the chassis. The ready-to-run model comes with a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery and a USB charger, so the core driving setup is already matched to the vehicle. At 60 mm wide, 92 mm high and 146 g in weight, the fire truck stays compact enough for desks, floors and small obstacle layouts while still carrying a clearly defined body shape. LED lighting sharpens the emergency-vehicle look in motion, and the detailed driver's cab adds another layer of scale character. The crane tower can be rotated manually through 360°, while the outriggers can be adjusted by hand in both height and length to change the support position for each setup. That mix of RC driving and manual functions suits short rescue-style routes, tabletop layouts and compact city scenes where turning, positioning and staging all matter. With a runtime of up to 40 minutes, the model has the endurance for repeated driving rounds before returning to the USB charger.

Mini RC cars

1:50 Nano City Garbage Truck, RC car, 2.4 GHz

€18.99

Utility trucks are a familiar part of the city scene, and this 1:50 Nano City Garbage Truck brings that working-vehicle character into a compact radio-controlled format. At 135 mm long, 60 mm wide and 76 mm high, the model combines a small footprint with a clearly defined body shape and a detailed driver's cab. The ready-to-run set includes the model, a 2.4 GHz remote control, a Li-Ion drive battery rated at 3.7 V and 500 mAh, a USB charger and instructions. With a weight of 146 g, the truck stays light in hand and easy to place on the floor between runs. The 40 minute runtime supports longer driving sessions without frequent charging breaks, while the radio system keeps the control link focused on the vehicle during each manoeuvre. LED lighting adds another functional detail to the body, and the rubber tires support controlled movement with their non-slip contact patch. The compact scale suits indoor routes across hallways, living spaces or a cleared play area, where the truck can weave around furniture legs, follow improvised collection rounds or line up with other city-themed vehicles. Between runs, the true-to-original design and utility-truck proportions also give the model a neat display presence on a shelf or desk.

Mini RC cars

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

€17.99

The Lexus LX570 appears here as a compact 1:60 Nano Racer with radio-controlled handling and a body shape that carries the full-size SUV's presence into a format just 79 mm long. At 33 mm wide, 22 mm high and 25 g in weight, the model stays light and easy to place on tables, smooth floors or short indoor courses. The 2.4 GHz control system supports stable command input across a range of 15 m, while the handset combines driving control with a built-in charging connection. A 1.2 V 80 mAh NiMH drive battery is included, and the ready-to-run format means the main components are already in place for immediate use. The official Lexus licence anchors the styling in the real vehicle, giving the front end and overall proportions a recognisable road-going identity. Included contents are the ready-to-run model, remote control with charging connection, NiMH drive battery, screwdriver and instructions. With up to 10 minutes of driving time, the Nano Racer suits quick laps across a desk, short obstacle layouts or side-by-side sessions with other mini RC vehicles. The ability to operate up to 50 vehicles simultaneously also opens the door to compact group racing without the control system getting in each other's way.

Mini RC cars

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

€17.99

The Lexus LX570 appears here as a compact 1:60 Nano Racer with a licensed body shape, combining SUV styling with radio-controlled driving in a format that measures just 79 mm long, 33 mm wide and 22 mm high. At 25 g, the small chassis stays light in hand and easy to place on short indoor routes, from table-edge slaloms to quick floor runs around everyday obstacles. The set comes as a ready-to-run model with a 2.4 GHz remote control unit, a 1.2 V/80 mAh NiMH drive battery, a screwdriver and instructions. The controller includes a charging connection, so the vehicle can be charged directly through the handset rather than through a separate dock. That compact charging setup keeps the driving system together in one place and suits spontaneous sessions when only a small space is available. The 15 m range gives enough distance for controlled manoeuvres across rooms, while the radio system allows up to 50 vehicles to run simultaneously for club-style races or family competitions. Its small scale makes the Nano Racer easy to store between runs and simple to bring out for short RC sessions without a large driving area. On smooth indoor surfaces, the Lexus LX570 shape and mini dimensions create a neat balance of display appeal and active use, whether the focus is solo driving or lining up several cars for close-quarters racing.

RC chassis & attachments

1:8 Akuma, body set, green cyan

€33.99

The Akuma body parts set brings a fresh racing look to a 1:8 RC model with a green and cyan finish and a matching rear wing. Designed as a body set, it gives hobby builds a defined outer shape for repair work, replacement use or a visual change on an existing chassis. The set is presented as body parts for the Akuma and includes the main shell, the separate wing and visible mounting hardware for installation. Tinted window graphics, black and silver areas and 4X4 markings shape the competition-inspired appearance shown in the imagery. Because this is a body parts set rather than a complete vehicle, the focus stays on the exterior components that change the model's look after wear, damage or a new build direction. The separate wing adds the finishing detail that completes the body line at the rear. On the hobby bench, this set fits naturally into rebuild sessions, shell swaps and trackside refresh work for a 1:8 platform. The included hardware supports mounting tasks, while the Akuma styling gives the finished model a bold off-road racing character once the shell and wing are in place.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Akuma, body set, pink grey shell

€33.99

The Akuma name suits the sharp, competition-style shape of this 1:8 body set. Pink and grey graphics spread across the moulded shell and separate rear wing, giving the buggy a striking race-ready look while keeping the outer panels visually matched. The shell shows pronounced aerodynamic contours, vent-style moulded detailing and prepared mounting points that guide installation on the vehicle. Alongside the main body and wing, the set includes fastening parts shown for the assembly: body clips, screws, nuts and spacers. That combination makes this set a practical choice when an existing shell needs replacement or when a fresh exterior is planned for an Akuma build. The separate wing adds another defined element to the silhouette and carries the same visual language as the shell itself. In workshop use, the set supports a straightforward body refresh with coordinated parts instead of piecing together individual exterior components. Once mounted, the bold contrast of bright pink, grey, black and white stands out clearly during running sessions and gives the model a focused off-road racing character.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Climb/Dessert Warrior 3.0, wheel set

€40.99

The 1:8 Climb/Dessert Warrior 3.0 wheel set brings a fresh running setup to off-road RC sessions with 4 mounted wheels that combine black rims and knobby rubber tyres in one ready-to-fit package. The tread pattern is shaped for rough terrain, giving the model a more planted feel on dirt sections, gravel paths and broken ground where clean traction matters. Each wheel uses a black multi-spoke rim with a deep inner dish and reinforcing spoke structure visible from the rear. On the outer face, the beadlock-style look with small moulded bolt details gives the set a purposeful desert and off-road character that suits the Climb/Dessert Warrior 3.0 designation. The central hex-style hub opening supports a direct mechanical connection at the axle, so the wheel set is built around practical replacement use rather than display-only styling. As a 4-piece set, the wheels suit a full vehicle refresh after heavy running or a matched swap before the next session on loose surfaces. The mounted design keeps the focus on getting a 1:8 model back onto the track with a consistent look and tread pattern across all 4 corners.

RC buggys

1:8 Monsuta, RC car, 100% RTR orange

€169.99

The 1:8 Monsuta 100% RTR orange brings large-scale off-road action straight to the ground with a 530 mm long chassis, fully suspended layout and 2.4 GHz radio system. Its 355 mm width and 200 mm height give the truck a broad, planted stance that suits rough tracks, loose dirt and uneven terrain. The ready-to-run set includes the remote control, a 7.4 V 3000 mAh Li-Ion drive battery, a USB charger, 4 x LR06 transmitter batteries and instructions, so the full driving package is in the box from the start. Water-resistant RC components support running on demanding surfaces where dust, splashes and changing conditions are part of the session. The quick-change battery mount shortens stops between runs and makes battery swaps more direct at the bench or trackside. At 2384 g, the chassis carries enough mass for a substantial road feel while the suspension works to keep the truck settled as the terrain changes. Whether the route runs across packed earth, gravel or a backyard jump line, the Monsuta is built around clear control response and off-road grip. A compatible spare battery is available separately for longer driving sessions with less downtime between packs.

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

€174.99

The 1:8 Rock Wilder brings large-scale off-road presence to every run with a 530 mm long chassis, full suspension and digital proportional control. In black and red trim, the ready-to-run setup pairs a type 550 brushed motor with water-resistant RC components for driving on mixed terrain where dust, loose gravel and uneven ground are part of the appeal. Its 355 mm width and 220 mm height give the model a broad, stable stance, while the 2552 g weight adds substance as the suspension works through ruts and bumps. Reinforced suspension arms support the independent layout at each corner, and the quick-change battery mount keeps battery swaps straightforward between sessions. The included 7.4 V 3000 mAh Li-Ion drive battery, USB charger, 2.4 GHz remote control and 4× LR06 transmitter batteries cover the core running equipment in one box. Age recommendation: 14 years+ The Rock Wilder suits trackside bashing, open gravel areas and compact dirt routes where the proportional steering and throttle inputs can be used with precision. Water-resistant electronics help the model stay focused on the route when conditions turn messy, and the RTR format keeps the emphasis on charging up and heading out for the next run.  Warning! Not suitable for children under 14 years.

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

€174.99

The 1:8 Rock Wilder RTR brings large-scale off-road driving into a 530 mm chassis with a 355 mm width and 220 mm height, giving the model a broad stance for rough terrain. Its yellow and red bodywork pairs with a type 550 brushed motor and a red anodized aluminum motor heat sink, combining strong drive output with a component setup shaped for sustained running. A quick-change battery mount shortens stops between packs, and the included 7.4 V 3000 mAh Li-Ion drive battery supplies up to 12 minutes of running time. At 2552 g, the model carries enough mass to feel planted as the suspension works across ruts, gravel and uneven ground. The solid impact-resistant front bumper takes the first contact in close running, while the 2.4 GHz radio system supports stable control without the channel conflicts common to older crystal-based sets. Age recommendation: 14 years and over. Loose dirt tracks, compacted paths and rough open ground all suit the Rock Wilder setup, especially where the long wheelbase and off-road tire format can work through changing grip levels. The ready-to-run package includes the remote control, drive battery, USB charger, 4× LR06 transmitter batteries and instructions, so the focus stays on charging the pack and heading out for the next run.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Virus Extreme, wheel set, 2 mounted wheels

€33.99

The Virus Extreme name points straight to rough-surface running, and this 1:8 wheel set supports that role with 2 mounted wheels built as complete assemblies. The black finish, multi-spoke rim design and pronounced off-road tread give the pair a focused look that suits a hard-driven RC setup on dirt and gravel. Because the rims and tyres are already combined, the set works as a straightforward replacement when existing running gear is worn or damaged. The deep block pattern is shaped for loose terrain, where the tread can key into the surface during acceleration and direction changes. The ready-built format also helps when keeping matching spares in the workshop, since both wheels share the same visual style and tread pattern. As a model supply for the Virus Extreme, the set concentrates on one practical job: restoring a consistent wheel and tyre setup with parts made for this series. On a buggy prepared for outdoor sessions, a fresh pair can be fitted before the next run on compacted earth, gravel paths or rough track sections. The set also suits routine maintenance between driving days, when a matching 2-wheel replacement keeps the model prepared for the next outing.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Wheel-Set KOD, wheel set, 17 mm hex

€40.99

Chunky tread blocks and a 1:8 format give this KOD wheel set a focused off-road setup for compatible RC vehicles. Designed for models with a 17 mm hex wheel hub, the 4-wheel set brings a direct way to refresh the running gear with a tread pattern built for loose and uneven ground. The mounted wheels combine black rims with rubber tyres shaped around an extreme stud profile. That profile gives the contact patch a more aggressive bite on dirt and rough tracks, while the rubber compound is specified for a very long service life. As a replacement set, the 4 matching wheels keep the vehicle on a consistent tread pattern at every corner, which matters when the chassis is working across mixed off-road surfaces. The 1:8 scale fit also makes the set relevant for a broad range of larger RC off-road platforms that use the stated hub format. In use, the wheel set suits track days on dusty ground, rough bashing areas and uneven outdoor terrain where a deeper tread pattern can make a clear difference. For model-building enthusiasts, it is a straightforward upgrade or spare set that keeps a compatible vehicle ready for the next run.

RC models in 1:87 scale

1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR

€104.99

Few cars carry the visual identity of the Volkswagen Beetle as clearly as this 1:87 RC version in red. The rounded body shape, detailed paintwork and decoration, and illuminated front and rear LED lights bring the classic silhouette into motion on a compact scale. The ready-to-run set includes the assembled model, a 2.4 GHz remote control system, a 3.7 V 40 mAh Li-Ion drive battery and 4 AAA transmitter batteries. Fully proportional control allows measured throttle and steering inputs instead of simple on-off commands, which gives the small chassis a more precise feel in confined spaces. Steering trim on the transmitter supports straight tracking when fine corrections are needed. The transmitter also handles charging, with a 45-minute quick-charge time matched by a driving time of up to 45 minutes. A storage showcase is included for keeping the model protected between runs. With its very small turning radius, the miniature Beetle suits short indoor routes, desk-side driving and detailed diorama settings where tighter corners matter. The 1:87 scale also makes it a strong fit for collectors and model-layout enthusiasts who want a drivable classic car with compact dimensions and a finished RTR setup.

RC models in 1:87 scale

1:87 VW Beetle Wintersport, RC car, 2.4 GHz

€109.99

The VW Beetle became one of the most recognisable car shapes of the post-war era, and this 1:87 RC version brings that silhouette into a compact format with working control and winter travel character. The VW Beetle Wintersport pairs micro scale handling with a light blue body, roof rack cargo and ski-themed detailing that stands out on a layout, shelf or small driving course. Its fully proportional control gives measured steering and throttle response instead of simple on-off inputs, which suits careful manoeuvres through model scenery and narrow tabletop routes. The compact chassis works with a very small turning radius, so bends, bridge sections and tighter lane changes feel more natural in limited space. Front and rear LED lights add a clear visual cue during running, especially in dimmer room light or evening diorama scenes. Power comes from a 3.7 V 40 mAh Li-Ion drive battery, and the set includes a 2.4 GHz remote control system plus 4x AAA transmitter batteries for operation. Charging takes place through the transmitter in 45 minutes, making short pauses between runs easy to manage. The ready assembled format puts the focus on driving, collecting and integrating the Beetle into model railway settings, classic car displays or compact indoor RC sessions. Age 14+

RC models in 1:87 scale

1:87 VW Beetle, RC car, 2.4 GHz RTR

€104.99

The Volkswagen Beetle remains one of the most recognisable car shapes of the 20th century, and this 1:87 RC version translates that silhouette into a compact model built for active driving. At 50 mm long, 20 mm wide and 18 mm high, the Bahama blue Beetle combines miniature scale with fully controllable handling and a detailed body that carries the character of the original into H0 format. Its 2WD RWD layout works with a brushed motor to deliver balanced running behaviour, while the 10 g weight keeps the model light on the surface. The officially licensed Volkswagen design is matched with front and rear LEDs that define the car clearly as it moves through table layouts, floor circuits or display-style street scenes. The 100% RTR set includes a permanently installed 3.7 V 40 mAh Li-Ion battery, 4x AAA transmitter batteries and a storage case, so the driving setup is complete straight away. The 2-channel radio system supports controlled runs with a range of up to 50 m, making the Beetle suitable for compact slalom routes, desk-side driving and small indoor courses where accurate line changes matter. Age marking: 14 years. Charging takes place through the transmitter and keeps the model ready for regular sessions between laps.

RC models in 1:87 scale

1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR

€114.99

The Volkswagen Beetle became one of the most recognisable car shapes of the 20th century, and this 1:87 RC version pairs that silhouette with a matching trailer for a compact driving set with strong period character. Detailed paintwork and decoration, front and rear LED lights, and the rounded body lines give the miniature a clear display presence even when parked between runs. Its 2.4 GHz radio system uses fully proportional control, so steering and throttle inputs can be adjusted smoothly instead of switching only between stop and full power. Steering trim helps fine-tune straight running, and the very small turning radius suits narrow routes on desks, shelves or indoor floors where larger RC models need more space. The included 3.7 V 40 mAh Li-Ion drive battery keeps the format compact, and the transmitter handles charging in 45 minutes. A storage showcase is included for presentation between driving sessions, and the set is marked 14+. The trailer adds a second moving element to the setup, changing the handling feel as the Beetle pulls a compact load through bends and turnarounds. Short evening runs, shelf display, or a small tabletop course all suit the 1:87 format, with the illuminated front and rear sections staying easy to spot as the model moves through tighter spaces.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Samba, RC car, surfboard RTR

€104.99

The Volkswagen T1 became one of the most recognisable vans of the post-war era, and this 1:87 VW T1 Samba brings that silhouette into a compact RC format with a surfboard detail and licensed Volkswagen styling. At 50 mm long, 21 mm wide and 19 mm high, the miniature format suits controlled runs on a desk, table or small indoor course where tight manoeuvres matter. The body combines detailed shaping with light blue and white paintwork, giving the Samba look a crisp period character in H0 scale. A weight of 15 g keeps the model light in hand and easy to place on narrow driving lines. The permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time, and charging takes place via the transmitter. The 100% RTR set also includes 4x AAA transmitter batteries and a storage case, so the model is ready for compact RC sessions straight away. Whether used for careful slalom runs between small obstacles or short laps across a tabletop layout, the miniature size and radio control create a focused driving setup in limited space. Age recommendation: 14 years and over.

RC receivers and accessories

2.4GHz KR-242XT Receiver, 4-channel radio unit

€74.99

The KR-242XT is a compact 2.4GHz 4-channel receiver made for hobby-grade RC installations where clean electronics packaging and dependable channel allocation matter. Its short-format design suits model layouts with limited installation space, while the 4-channel configuration leaves room for more than the core driving functions in compatible radio-controlled builds. Within an RC setup, the receiver acts as the link between transmitter commands and the vehicle's onboard electronics, making channel management a central part of the build. The KR-242XT is positioned for enthusiasts who work with detailed model configurations and need a receiver that fits neatly into tighter chassis sections. The 2.4GHz specification places it in the current standard for modern radio control systems, and the compact housing supports tidy cable runs around surrounding components. With an age marking of 14 Years, it sits clearly in the hobby segment rather than entry-level toy use. This format suits workshop upgrades, replacement installations, and fresh RC builds where the electronics package needs to stay compact. In a carefully planned chassis layout, a short receiver can make the difference between a crowded interior and a cleaner, more accessible arrangement.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 13T-BB, electric motor, 6 V RC drive

€18.99

The 540 Pro 13T-BB electric motor is a brushed RC drive unit built for model vehicle projects that need a clearly defined performance setup. With 13 turns, a nominal voltage of 6 V and an operating range from 4.8 to 8.4 V, it fits tuning, replacement and workshop builds where the electrical data matters as much as the fit. The attached cable adds a practical connection detail straight from the pack. Its technical profile centres on 32,000 rpm, 35 N mm torque, 99 W output and 5.3 amps current consumption. That combination suits hobbyists comparing drive characteristics across compatible RC electronics rather than choosing by size alone. The 540 can format is a familiar reference point in many model vehicle platforms, and the BB designation marks this version as a ball bearing motor. For workshop planning, the stated voltage window helps match the motor to an existing setup without guesswork. In use, this motor suits replacement jobs on worn brushed drives, fresh tuning builds and spare-parts boxes for regular track or car park sessions. The compact 540 format and included cable keep the focus on fitting the motor into a compatible RC chassis and getting the drivetrain back into action.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 17T-BB, electric motor, 6 V brushed

€18.99

The 540 Pro 17T-BB electric motor brings classic brushed drive character to RC vehicle builds with a 540 size format, 17 turns and a measured output of 69 W. At 24,500 rpm, the motor delivers a lively power curve that suits hobby setups looking for a defined balance of speed and control rather than an undefined all-round unit. Its nominal voltage is 6 V, while the stated operating range of 4.8 to 8.4 V leaves room for different electronics configurations within the same build plan. Current consumption is listed at 3.5 amps, and the 32 N mm torque figure gives a concrete reference for how the motor translates electrical input into rotational force at the shaft. The BB designation points to ball bearing support, a detail valued in model-building circles for smooth running in a compact drive component. Included cable simplifies the connection step and keeps the motor ready for fitting into a compatible RC chassis. With an age marking of 14 years, this motor fits enthusiast-oriented RC projects where component choice shapes the final driving character. It works well in workshop-style upgrade sessions, replacement builds or fresh vehicle assemblies where a 540 brushed motor with 17 turns is the required drive unit.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 21T-BB, electric motor, 6 V 60 W

€18.99

The 540 Pro 21T-BB electric motor brings classic brushed drive technology to RC model builds in a compact 540 size format. With 21 turns, a 6 V nominal voltage and a stated output of 60 W, it gives hobby projects a clearly defined motor option for drivetrain installations where size, power and electrical data all need to line up. Its operating range spans 4.8 to 8.4 V, making the motor suitable for different compatible power configurations within that window. The stated speed of 19,000 rpm and current consumption of 2.7 amps provide concrete figures for planning the drive package around the motor's characteristics. A torque rating of 30 N mm adds another useful reference point when matching the motor to gearing, transmission parts and the intended running style of the model. The included cable supports straightforward integration into the vehicle's electrical layout. In workshop use, this motor suits enthusiasts comparing voltage, rpm, torque and turns before choosing a brushed setup for a compatible RC vehicle. It also works well as a replacement or upgrade path when an existing 540 format installation calls for a motor with clearly specified electrical and performance values.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

6K Reflex Stick Pro 4 WP Receiver, RC receiver

€42.99

The 6K Reflex Stick Pro 4 WP Receiver brings compact radio control hardware to RC vehicles and boats that need dependable 2.4 GHz signal handling in a small format. With 6 channels in a waterproof housing, this receiver supports steering, throttle and additional functions while fitting into installations where space is limited. Its housing measures 46 x 28 x 17 mm and the unit weighs 13 g, so the receiver can be positioned in many chassis layouts without taking up much room. As a replacement receiver, it is made to work with the FS 6K Reflex Stick Pro 4 and the FS 6K Reflex Stick Pro 4 LCD remote controls named in the product data. The 2.4 GHz frequency range supports stable command transmission for models that rely on precise radio response. The 6-channel layout also leaves room for more complex function control than a basic 2-channel setup. In a trail truck, work vehicle, boat or other RC build with several switchable functions, the receiver supports a tidy electronics layout and clear channel allocation. Age 14 Years+

NiMH batteries

7.2V 2500mAh NiMH Race Battery, RC battery

€22.99

Built for RC vehicles and broader model building use, this 7.2 V NiMH race battery combines a 2500 mAh capacity with a Tamiya connector system in a format that fits established hobby setups. The nickel-metal hydride pack is designed as a rechargeable power source for compatible models, making it a practical choice where repeated driving sessions and regular charging cycles are part of the routine. Its specification focuses on the demands of active RC use. A maximum charging current of 2.5 A allows the pack to be charged within the stated limit, while the high current discharge characteristic supports applications that draw stronger power under load. That combination suits a wide range of electric model uses, from vehicle platforms to other model building applications that rely on a 7.2 V battery with this connector format. The pack format with bundled cells, power leads and plug connection follows the familiar layout used across many hobby systems. In use, the battery slots naturally into workshop preparation, replacement planning and regular running sessions with compatible RC models. Age marking: 14 years. Whether kept as a spare pack for longer track time or used as the main power source in a compatible chassis, it brings clear, stated electrical data to the setup.

LiPo batteries

7.4V 4500mAh LiPo Classic-Size, RC battery

€36.99

Built for classic RC layouts, this 2S LiPo battery brings 7.4V output, 4500mAh capacity and a 60C discharge rate into a Classic-Size format that matches the footprint of conventional NiCd and NiMH packs. In a 1:10 chassis with a standard battery slot, the 134 x 45 x 24 mm housing drops into the familiar space while delivering the response and consistency expected from modern LiPo power. The pack uses a Deans plug connector for the main connection and an XHP balancer connection for cell balancing during charging. Its 223 g weight places a substantial energy reserve into a format that remains suitable for common vintage RC cars. The 2-cell configuration supplies 7.4 volts, making it a direct fit for setups designed around this voltage class. The 4500mAh rating extends running potential beyond smaller packs, while the 60C specification supports current demand when acceleration loads rise. Age marking: 14 years and over. This battery suits restoration projects, regular track sessions and classic touring car builds that use a standard battery compartment. It also works well where older chassis dimensions matter, but modern LiPo chemistry is preferred over legacy pack formats.  Warning! Not suitable for children under 14 years.

Model helicopters

AB.205 / UH-1D SAR Helicopter Model Kit 1:48

€27.49

The Italeri AB.205 / UH-1D "SAR" presents the Agusta-Bell AB-205 as a detailed 1:48 scale helicopter build, capturing the form of a multirole aircraft developed in Italy under license from the Bell UH-1 Iroquois, widely known as the "Huey." The search-and-rescue version gives the finished model a clear operational identity, with the familiar utility-helicopter layout translated into a compact display scale. The full-size AB-205 entered service in the 1960s and was developed for rapid transport into areas that were difficult to reach, a role that shaped its broad, functional airframe. The aircraft combined structural simplicity with a configuration that could be adapted for military and civilian duties, including cargo transport, medical evacuation, civil protection and search-and-rescue missions. The original helicopter had a flight range of over 500 km and a maximum speed exceeding 200 km/h, details that underline the capable design behind this replica. That background gives the model extra depth on the workbench and in a finished collection, especially alongside other rotary-wing aircraft from the same era. The AB-205 also served in the aviation units of the Arma dei Carabinieri, adding a further real-world service context to this SAR-focused subject.  Warning! Not suitable for children under 14 years.

Axles & drive shafts

Akuma Alu-hex Hub 17 mm RC Wheel Adapter

€12.79

The Akuma Alu-hex hub 17 mm is a compact RC spare part set for wheel mounting and running gear service on compatible Akuma model vehicles. With 2 machined aluminium hub pieces, 2 matching nuts, 2 metal pins and 2 black set screws, the set brings together the fastening hardware needed for a complete hub replacement at the wheel end. The 17 mm hex format defines the wheel interface, while the threaded hub design and separate locking hardware point to a mechanical assembly that is secured in several steps rather than a simple push fit. The metal pins and set screws support alignment and retention within the hub setup, helping restore the intended connection between axle area and wheel mount when original parts are worn, lost or damaged. The silver finish keeps the parts easy to identify during bench work, and the compact format suits parts storage in an RC workshop or field box. This kind of hardware fits naturally into rebuilds, maintenance sessions and spare-parts stock for regular RC driving. Whether a model is being refreshed after heavy use or prepared with replacement wheel-end hardware before the next run, this set supplies the core mounting parts in one pack.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Battery Holder Set, model accessory

€27.99

The Akuma Battery Holder Set adds a dedicated battery mounting solution to the model layout with a long tray, matching cover plate and support brackets. Black moulded parts and a screw-fastened structure create a clean, component-based setup that suits hobby work on 14 Years+ models and keeps the battery area clearly organised. Alongside the main tray, the set includes a rectangular frame bracket with upright arms, a clamp-style bracket with mounting tabs and a side loop, a small spacer block, 6 black screws and 2 wide hook-and-loop straps. This combination supports a more tailored installation around the chassis area, with the straps wrapping the battery pack while the rigid parts define its position. The separate brackets also help adapt the holder to the available mounting points rather than relying on a loose battery placement. In workshop sessions, the set supports battery installation, refit work and replacement of worn holder parts on the Akuma. It also suits rebuilds where a clear, screw-mounted battery position is needed for a neat internal layout and repeatable pack changes between driving sessions.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Bodyholder Kit, RC spare part set

€6.59

The Akuma bodyholder kit is a dedicated RC spare part set for front and rear body mounting points, built to return the correct connection between chassis and bodyshell on the matching Akuma model. With a minimum age marking of 14 Years, it sits in the hobby and model-building range rather than general toy use. The set includes a structural holder piece, a mounting plate, 2 matching inserts and 2 screws. The black moulded parts are formed for mechanical fastening, with the plate using multiple mounting holes and the main holder section shaped to seat the inserts and secure the assembly. This layout supports a direct replacement of worn, damaged or missing bodyholder components without introducing unrelated parts. As a model supply in the Carson Modelsport range, the kit is aimed at maintenance work that keeps an RC vehicle ready for continued running. In workshop use, the parts suit routine repairs after body mount wear, impact damage or lost hardware. The front and rear application makes the set useful when restoring the shell position and attachment points so the vehicle can return to its intended fit and appearance.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Motorholder, model accessory mount

€8.49

The Akuma Motorholder is a dedicated mounting part for the Akuma platform, built to secure the motor area with a precisely shaped metal bracket. Its rectangular form combines recessed fixing points with a large central opening and a U-shaped cutout, creating the clearances needed around the drive section while keeping the mount closely integrated with the surrounding assembly. The top face uses countersunk holes so the 5 included hex screws sit flush once fitted. Elongated slots add adjustment range during installation, which supports accurate motor positioning when replacing worn parts or rebuilding the drivetrain section. Three threaded side holes extend the mounting options for adjoining chassis elements, while the darker side walls and machined edges underline the technical character of this spare part. As a focused workshop component rather than a decorative add-on, the mount is shaped around fit, fastening and alignment inside the Akuma layout. This accessory suits bench repairs, routine maintenance and parts replacement on an Akuma model marked 14 Years and up. In a rebuild setup, the bracket forms a defined connection point for the motor section, helping keep the chassis assembly orderly and correctly aligned.  Warning! Not suitable for children under 14 years.

Pinions & gears

Akuma Pinion Gear 14T Model Accessory

€6.89

The Akuma Pinion Gear 14T is a drivetrain accessory for compatible Akuma model vehicles, built around a clear 14-tooth specification that helps identify the correct replacement or maintenance part within an RC setup. In workshop use, that concrete tooth count gives hobbyists a direct reference when checking an existing transmission configuration or preparing a repair. As part of the model supplies range, this gear suits routine servicing, parts organisation and planned spares stocking for RC vehicles in the Akuma line. The product data identifies it as a separate accessory rather than a complete vehicle, which makes it relevant for ongoing upkeep of a running model. The designation Motor Pinion 14T points to its role in the drive system, where a pinion gear forms part of the connection between motor output and the rest of the drivetrain. The listed references 500409082 and 500409083 link the gear to the Akuma context named in the data. On the hobby bench, a dedicated replacement gear helps keep maintenance focused and parts selection straightforward when an existing drivetrain needs attention. The 14 Years age marking is stated in the product data, placing this accessory in the model-building and RC hobby segment.  Warning! Not suitable for children under 14 years.

Additional spares

Akuma Steering Rack, model accessory, aluminum

€8.49

The Akuma steering rack brings a key front-end control component into the workshop as an aluminum replacement part for Carson Akuma models. Its role sits directly in the steering assembly, where the rack forms the connection point for the linkage and supports the intended movement of the front wheels through the chassis layout. The part is described as an Alu steering rack and is intended as a model accessory within the Models & Accessories range. As a dedicated spare part rather than a universal fitting, it matches the Akuma designation named in the data and gives repair and maintenance work a clearly defined replacement for the steering area. The aluminum construction adds a specific material choice to this component, making it a relevant search term for hobbyists who maintain, rebuild, or refresh running gear parts. With the steering plate named in the source data, the part also speaks to focused servicing of the control hardware rather than a general upgrade bundle. In practical use, this kind of replacement belongs on the bench during routine maintenance, after wear in the steering mechanism, or when a build needs the correct Akuma-specific part to return the front end to working order. The 14 Years age marking is stated in the product data.  Warning! Not suitable for children under 14 years.

Wishbones

Akuma Tie-Rods Kit, RC spare part, 4 pcs

€12.79

The Akuma tie-rods kit supplies 4 replacement parts for front and rear linkage work on compatible RC vehicle setups. As a dedicated spare part set, it gives model-building enthusiasts the core pieces needed when worn linkage components need to be exchanged and the chassis brought back into running condition. The set is identified in the data as a front and rear tie-rods kit and is intended for Akuma models. That makes it a focused choice for maintenance, repair, or parts stock in an RC workshop rather than a general accessory with unclear fit. The included 4-piece format suits jobs where several connection points need attention at once, reducing the need to source individual rods separately. The product image shows black moulded linkage components with mounting holes and small metal posts, indicating a mechanical connection role within the steering or suspension layout. Such parts are central wherever wheel guidance and chassis articulation depend on clean, correctly aligned link points. In practice, this kind of spare set fits naturally into routine rebuilds after heavy running sessions, collision damage, or scheduled chassis servicing. It also works well as a shelf-ready replacement set for hobby benches where compatible Akuma parts are kept available for fast turnaround between repair and the next drive.  Warning! Not suitable for children under 14 years.

Model car kit

Alfa Romeo 8C 2300 1931-33 Model Kit 1:12

€169.99

The Italeri Alfa Romeo 8C 2300 1931-33 model kit in 1:12 scale brings one of the defining sports cars of the 1930s into a 32.0 cm format with strong visual presence on the bench and on display. Its long bonnet, open 2-seat body and period racing proportions give the finished car the unmistakable character linked to the 8-cylinder supercharged original with 2,336 cc. This assembly kit is built from 320 parts, joined by 30 chromed parts and further refined with photoetched parts, screws, tubes and nylon net. The opening cowling allows the engine area to stay visible after assembly, so the highly detailed engine remains part of the finished presentation rather than disappearing under the bodywork. Steering wheels and realistic suspension add working-style detail to the structure and help the model reflect the mechanical layout of the full-size car. Rubber tires complete the wheel setup with a material and surface finish that suit a classic roadster of this era. The subject draws on the Alfa Romeo 8C line that became closely associated with international racing success and the name of Tazio Nuvolari, while this version focuses on the 2-seat Sport road car from 1931-33. With an assembly time of 600 minutes and an age marking of 14 Years, the kit suits a measured, detail-led build where body, engine and trim come together step by step into a substantial historic display model.

Model car kit

Alfa Romeo 8C 2300 Monza Nuvolari Model Kit

€169.99

The Italeri Alfa Romeo 8C 2300 Monza Nuvolari model kit captures one of the best-known racing cars of the 1930s in a large 1:12 scale with a finished length of 32.0 cm. Its long bonnet, open cockpit and exposed wheel layout give the completed car a strong period racing presence, whether it stands in a cabinet or takes shape step by step on the workbench. This assembly kit is built around 100% new moulds and combines 300 parts with 30 chromed parts, photoetched parts and rubber tires. The opening cowling adds a functional display feature while also framing the highly detailed engine once the build is complete. Steering wheels and realistic suspension add further mechanical character, and the extra detailing materials such as screws, tubes, rope and nylon net widen the finishing options across the body and chassis. The included colour instruction sheet supports the long 600 minute assembly process with a clear visual guide. The full-size Alfa Romeo 8C 2300 Monza took its name from the twin-seater Grand Prix car linked to Tazio Nuvolari and the Italian Grand Prix at Monza. That racing history gives the finished replica a clear motorsport identity, especially when the body markings and trim are applied. Age recommendation: 14 Years.

Model car kit

Alfa Romeo Giulietta Spider 1300 Model Kit 1:24

€37.99

The Italeri Alfa Romeo Giulietta Spider 1300 in 1:24 scale turns a celebrated Italian convertible into a detailed model kit with classic proportions and a compact finished length of 16.2 cm. The body shape, bright trim and open roadster layout give the build a distinctly early 1960s character, while the closed-roof option adds another authentic configuration drawn from the same car. This assembly kit is built around more than exterior form alone. The detailed engine gives the model a mechanical focal point, so the build is not limited to body panels and trim. Chrome parts define key accents across the car and sharpen the contrast between painted surfaces and metallic details. A colors instruction sheet supports accurate finishing choices during the 600-minute assembly process, which suits model builders aged 14 years and up. The subject itself reflects the 1962 evolution of the Giulietta Spider, when Alfa Romeo introduced bodywork updates, interior refinements and a larger 1,570 cm3 four-cylinder engine. On the bench, the 1:24 scale leaves room for careful paintwork, trim placement and engine detailing. Once completed, the 16.2 cm model sits comfortably on a shelf, in a display case or alongside other classic car builds, where the Spider profile, chrome highlights and optional closed capote give it a strong period presence.

RC shock absorbers & damper bridges

Alu damper 75 mm, RC damper set for 1:10

€15.49

Suspension tuning plays a central role in how a 1:10 RC chassis settles, rolls and tracks through corners, and this aluminium damper set brings that adjustment point into a compact 75 mm format. The set contains 2 dampers with coil-over springs and a metal construction that suits replacement work, rebuilds and workshop-led setup changes on compatible models. The dampers use threaded aluminium bodies, allowing the spring preload to be altered directly on the unit rather than through fixed-position parts alone. That layout helps when ride height and suspension response need to be matched more closely to the chassis setup already in use. The eyelet mounting points at the upper and lower ends follow a familiar RC suspension format, giving each damper a clear mechanical role between chassis and suspension arm. The included scale reference of 1:10 places the set within a widely used model category, where exact component length and mounting style are central to fitment. In practice, a pair like this suits maintenance benches, parts boxes and planned suspension updates on RC cars that use compatible 75 mm dampers. Whether replacing worn units or refining a running setup, the 2-piece configuration supports axle-based installation and keeps the focus on controlled suspension movement rather than improvised parts matching.

Military aeroplane models

AMX Ghibli Aircraft Model Kit 1:72 Scale

€29.99

The Italeri AMX Ghibli model kit brings a modern military aircraft into 1:72 scale with newly tooled parts, photo-etched details and markings for 4 versions. The finished build reflects the high swept wing layout of the original AMX "Ghibli", a single-engine ground attack aircraft developed through cooperation between the Italian and Brazilian aviation industries. This assembly kit is made for hands-on construction and finishing, with 600 minutes of assembly time supporting a more involved build. The aircraft represented here was developed in the 1980s to replace the Fiat G-91Y in Italian service, while Brazil also used the programme to replace the MB-326. The original aircraft used a Rolls-Royce Spey 807 engine and could reach 1,000 km/h. Italian service aircraft carried a 20 mm M61 cannon and an offensive payload of 3,800 kg, details that give the subject its distinct operational identity. On the workbench, the 1:72 format suits careful painting, decal placement and display planning without demanding excessive space. Once completed, the AMX Ghibli sits naturally in a modern military aviation collection, whether displayed as a single aircraft or alongside other late Cold War and post-Cold War jet subjects. Paints are required separately.  Warning! Not suitable for children under 14 years.

Model tanks

AS 42 Sahariana Model Kit 1:72 Desert Scout

€13.49

The Italeri AS 42 Sahariana model kit captures a distinctive World War II desert reconnaissance vehicle in 1:72 scale, combining compact dimensions with the purposeful layout developed for long-range operations in North Africa. Based on the chassis and mechanics of the AB 41, the original Camionetta Desertica modello 42 Sahariana was shaped for sand terrain, and that specialised role gives the finished replica its unmistakable profile. The open body, low side sections and external stowage create a build with plenty of visible structure once assembled. Fine parts for the chassis, wheels, interior elements and mounted equipment give the model a layered look that rewards careful painting and detail work. The subject is especially notable for its operational flexibility, as the real vehicle could appear with different armament configurations including a Breda 20/65 mod 1935 machine gun, a 47/32 anti-tank gun or a 20 mm Solothurn anti-tank rifle. Decals for 2 versions extend the historical finish options for the completed replica. On the bench, the 1:72 scale keeps the project manageable while still leaving room for crisp military detailing. Once finished, the AS 42 Sahariana sits naturally in a desert campaign display, a World War II vehicle lineup or a compact wargaming collection with period character and strong visual presence.  Warning! Not suitable for children under 14 years.

Model trucks

Black Thunder Truck Model Kit 1:24 Scale

€69.99

Black Thunder brings the customized Mack Superliner into 1:24 scale as a detailed plastic kit with a bold show-truck presence. The glossy black livery gives the finished truck a striking silhouette, while the Australian styling direction sets it apart from a standard road-going version. The full-size Black Thunder kept the original mechanical base and added tuning modifications that changed both its appearance and its engine and exhaust character. That background gives the model a clear identity during assembly, with each stage centered on a truck built around personalization rather than fleet uniformity. The Mack Superliner name also connects the subject to a vehicle that found commercial success beyond the United States, especially in Australia, where private owners and specialist body shops created highly individual machines. In model form, that context adds depth to the finished build and places the truck within a culture of custom transport design. On a shelf, in a workshop corner or as part of a transport collection, the Black Thunder theme stands out through its dark finish and event-focused character. The 14 Years+ marking and detailed kit format suit builders who want a truck subject shaped by custom aesthetics rather than standard factory trim.  Warning! Not suitable for children under 14 years.

Model motorcycles

BMW R75 Military Motorcycle with Sidecar 1:9

€65.99

The Italeri BMW R75 German Milit.Motor.w/Sidecar brings a distinctive wartime motorcycle to the workbench in 1:9 scale, with a finished model length of 26.7 cm that gives the sidecar layout, exposed engine and military fittings real visual presence. As a detailed assembly kit, it focuses on the characteristic engineering of the original BMW R75 rather than a simplified display piece. The full-size motorcycle entered production in 1941 after a joint BMW and Zundapp development brief aimed at using as many common components as possible for maintenance and spare-parts logistics. Its most unusual feature was the driven sidecar wheel, linked to the motorcycle through an axle system and supported by a locking differential with selectable gear ratios for on-road and off-road use. The original twin-cylinder 750 cc engine delivered 26 HP and a top speed of 95 km/h, giving the model a strong historical and mechanical background. The kit also offers decals for 4 versions, allowing the finished build to reflect different unit markings and service appearances. During assembly and finishing, the large 1:9 scale gives painted details, stencilling and weathering more room to stand out across the motorcycle, sidecar and mounted equipment. The completed model suits shelf display, diorama settings or a military vehicle collection where the combination of motorcycle, sidecar and period markings adds a different silhouette from standard armoured subjects.

Model car kit

Bugatti Coupe Napoleon 1:24 Detailed Plastic Kit

€36.99

The Bugatti Coupe Napoleon arrives as a 1:24 detailed plastic kit based on the Type 41 Royale, a car built by Bugatti between 1929 and 1933 in only 6 units. In scale form, the long silhouette, formal roofline and imposing proportions give the finished build the presence associated with one of the most exclusive cars in automotive history. The source subject stands apart through its extraordinary engineering and coachbuilt identity. The original Type 41 used a shared chassis and engine across the 6 cars, while each version differed in bodywork configuration, and the Coupe Napoleon was the first in chassis order. The historical reference also names an engine displacement of over 12,000 cm3, underlining the exceptional scale of the full-size car behind this kit. Its two-tone black and blue bodywork and velvet interior are central visual cues for the build, shaping a display model that reflects Ettore Bugatti's private car and a recognised icon of world automotive production. On the bench, the 1:24 format gives room to appreciate the car's distinctive length and stately proportions as the body takes shape. Once completed, the model fits naturally into a classic car collection, a period automotive display or a line-up focused on landmark European grand touring design.

Model car kit

Bugatti Type 35B 1:12 racing car model kit

€169.99

The Italeri Bugatti Type 35B 1:12 racing car model kit brings one of motorsport's defining machines into a large display scale with the long body, open cockpit and signature horseshoe-shaped radiator grille clearly expressed in the finished build. Based on the Bugatti Type 35B linked to Targa Florio and Monaco Grand Prix racing history, the model carries the character of a 1920s competition car with exposed details and a focused mechanical layout. The subject itself is rich in engineering detail. The original car used an 8-cylinder 2,263 cc engine, a 4-speed manual gearbox and a supercharger, and that technical identity shapes the model's appeal beyond its bodywork alone. New parts expand the build, while the opening cowling creates direct access to the engine area once assembled. Artificial leather, chromed parts, photoetched parts, screws, tubes and a die-cut masking sheet support a finish with varied textures and sharper detailing across key sections. The large 1:12 scale also gives the spoked wheel design, cockpit area and external race-car proportions more room to stand out. On the bench, the build suits careful painting, masking and detail work across the body, engine bay and cockpit. Once completed, the model carries the visual drama of a pre-war Grand Prix car, whether placed in a collection, photographed close up or displayed to highlight its racing silhouette and exposed mechanical character.  Warning! Not suitable for children under 14 years.

Model motorcycles

Cagiva Elephant 850 Winner 1987 Model Kit 1:9

€64.99

The Italeri Cagiva Elephant 850 Winner 1987 model kit brings a landmark Paris-Dakar rally motorcycle into a large 1:9 scale format, with a finished length of 23.8 cm that gives the fairing, seat profile and off-road layout clear visual impact on display. Based on the 1987 race machine, the build captures the distinctive desert configuration that set the original bike apart in endurance competition. The full-size motorcycle combined a steel tube and light alloy trellis frame with an air-cooled twin-cylinder engine rated at 80 HP at 8500 rpm, and the bodywork was shaped around a large protective fairing. Italeri supports that character with a detailed plastic kit that also includes rubber parts, screws, springs and rubber tubes, adding extra texture and mechanical definition during the build. The decal sheet carries race numbers, sponsor markings, instrument details and body striping used to recreate the period rally livery with precision. With an assembly time of about 600 minutes, this kit suits builders who enjoy a longer bench session centered on painting, fitting and finishing. The completed motorcycle stands out in a display case, on a workshop shelf or as part of a motorsport collection, where the Dakar-inspired silhouette, tall front section and competition graphics remain easy to read from across the room.

Model aircraft

CANT Z.1007 Alcione model kit 1:72 aircraft

€33.49

The CANT Z.1007 Alcione model kit in 1:72 scale recreates an Italian medium bomber that entered service in the late 1930s and saw extensive use with the Regia Aeronautica during the Second World War. Its defining 3-engine configuration gives the aircraft a distinctive silhouette on the workbench and in a finished display, while the historical subject adds clear context for builders drawn to military aviation. Designed by Filippo Zappata, the original CANT Z.1007 Alcione combined a wooden structure with 3 Piaggio P.XI radial engines, each rated at 1,000 hp. That power allowed the bomber to reach a maximum speed of 450 km/h. The aircraft also carried up to 1,200 kg of offensive payload in an internal bomb bay, a detail that underlines its role as a medium bomber rather than a transport or patrol aircraft alone. Crew capacity was typically 5 men, rising to 6 when a photographic operator joined reconnaissance and maritime patrol missions. The subject connects this 1:72 build to the Mediterranean, Balkan and North African theatres where the aircraft was mainly deployed. With an age marking of 14 years and up, the kit suits builders looking for a historically grounded aircraft project with a clearly documented wartime background and a recognisable tri-motor layout.  Warning! Not suitable for children under 14 years.

Military aeroplane models

CANT Z.501 Gabbiano model kit 1:72 seaplane

€30.99

The Italeri CANT Z.501 Gabbiano brings a distinctive Italian flying boat into 1:72 scale, capturing the long central hull, broad high wing and stabilising lateral floats that defined this maritime reconnaissance aircraft. As a detailed assembly kit, it turns the unusual seaplane layout into a focused build with a strong display presence once the airframe is complete. The original CANT Z.501 was developed in the 1930s by engineer Filippo Zappata for Cantieri Riuniti dell'Adriatico and served in patrol, search and rescue, and reconnaissance roles at sea. Its full-size configuration used a 900 HP Isotta Fraschini Asso XI engine and reached a maximum speed of 275 km/h, details that place the model within a clearly documented aviation context. The aircraft entered operational service during the Spanish Civil War and later saw extensive use by the Regia Aeronautica in the Mediterranean theatre during World War II. Defensive armament on the original aircraft consisted of three 7.7 mm Breda-SAFAT machine guns, and it could also carry a limited offensive payload. With about 600 minutes of assembly time, the build suits sessions that reward careful painting, decal placement and attention to the aircraft's float-equipped wing arrangement. The super decals sheet for 4 versions opens different finishing directions for a shelf display centred on interwar and World War II Italian naval aviation. Recommended from 14 years.  Warning! Not suitable for children under 14 years.

Catalogues & merchandise

CARSON Leaflet 2025

€0.69

Ball bearings

CC-02 Chassis Ball Bearing Set, model accessory

€27.99

The CC-02 chassis uses multiple rotating points across its transmission and axle layout, and this ball bearing set is built to replace those wear components with 22 precision-made metal bearings matched to that platform. The mixed sizes shown in the set support the different bearing seats used within the CC-02 chassis, giving model-building enthusiasts a focused upgrade for smoother mechanical operation. Instead of relying on plain bushings, the bearing design supports freer rotation at the points where shafts and driven parts turn inside the chassis. That can help the drivetrain run with less drag during regular use and gives maintenance work a more exact, component-based approach. The set combines 16 bearings of one size with 6 additional bearings in other sizes, reflecting the varied mounting positions found in the chassis layout. For rebuilds, servicing or a fresh parts refresh, that model-specific spread keeps the upgrade aligned with the actual hardware used in the vehicle. In workshop sessions, the set fits naturally into routine maintenance, from replacing worn running parts to preparing a chassis for cleaner, more efficient rotation. It also suits hobby benches where a CC-02 build is being refined with dedicated spare parts chosen for the platform rather than generic hardware.

Model tanks

Commando Car 1:35 Scale Model Kit with Figure

€12.49

The Italeri Commando Car presents a compact 1:35 scale military vehicle kit with a finished length of 9.5 cm and the open layout of a modified airborne jeep. Its proportions, exposed cabin and field equipment create a focused display piece that brings reconnaissance and commando vehicle history onto the workbench in a manageable format. The build is shaped around distinct subassemblies, including the interior tub, radiator and grille section, ladder-style chassis, suspension parts, wheels and exterior fittings. Instruction stages show steering and control details, seat assemblies, stowage pieces, a spare wheel and multiple weapon mounts, giving the model a layered mechanical look rather than a simplified silhouette. The subject is based on a wartime vehicle adapted for infantry support and rapid raids, with 5 machine guns and additional fuel capacity of 135 l in the original configuration. A crew figure is included to add scale contrast and strengthen diorama placement. On a shelf, in a military vehicle lineup or as part of a terrain scene, the Commando Car reads clearly through its low body, exposed seating and heavily equipped profile. Assembly is required, with a stated build time of 600 minutes. Paints, tools and cement are required separately.

Model figures

Confederate Cavalry Model Kit 1:72 Civil War

€10.99

Italeri Confederate Cavalry brings American Civil War mounted troops into 1:72 scale with an assembly kit built for historical displays, painted collections and battlefield dioramas. The set centres on cavalry figures and horses with varied poses, giving the finished scene the movement of a charge, a patrol or a formed mounted unit across terrain, roads or camp edges. The source material for the set points to Confederate cavalry regiments and their distinctive uniform details, including yellow trim, while also noting varied personal weapons and customised dress. That mix gives the finished group a less uniform field appearance than parade troops and suits scenes that aim to show the irregular character of wartime cavalry service. The sprues show riders with sabers and firearms, horse poses in motion, and a fallen horse part that can change the tone of a diorama from formal display to active combat. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a cabinet or across a wargaming table, the 1:72 scale makes the set easy to combine with other American Civil War miniatures, terrain pieces and period artillery. Careful painting can bring out saddle gear, hats, jackets and horse tack, while grouped placement can suggest a fast-moving attack line or a command element within a broader historical scene.

Model tanks

Crusader Mk.III Tank Kit with British Crew 1:35

€36.99

The Italeri Crusader Mk.III with British Crew brings a key British cruiser tank of the Second World War into 1:35 scale, pairing the later Mk.III configuration with a full crew scene for a display that goes beyond the vehicle alone. The build centers on the Crusader's desert-war profile, with its 6 pdr cannon and the distinctive running gear layout that made the type notable in rough terrain operations. This plastic kit is designed as a detailed assembly project and lists an assembly time of 600 minutes, giving the tank and figures room for a more involved finish. The Christie suspension with large diameter rolling wheels is part of the Crusader's defining engineering, and that layout gives the completed model a recognisable stance. Gluable rubber tracks shape the lower hull with flexible track runs, while the marking sheet supplies decals for 3 versions with serial numbers and tactical signs. The set also contains 9 figures, opening up options for command, maintenance and rest-scene arrangements around the tank. On a shelf, in a desert diorama or as part of a wider WWII armour collection, the combination of vehicle and crew creates a fuller historical scene than a tank alone. Paints and tools are required separately.

RC servos

CS-10 Digital Servo, RC servo, waterproof

€31.99

Compact RC control systems rely on a servo that turns radio signals into exact movement, and the CS-10 Digital Servo is built for that task with digital regulation, waterproof construction and a JR plug layout. The black housing with metallic centre section and splined output shaft is shaped for installation in common model applications where steering, throttle or other linkages need controlled travel. Its 0.17-second response supports quick actuation, while the 10 kg torque rating provides the force needed for demanding control duties. Ball bearings support the output shaft for smooth running, and the metal gear train is designed for direct transfer of servo movement to the connected horn and linkage. Included mounting hardware expands setup options with a single-arm horn, an X-shaped horn with multiple linkage holes, rubber grommets and a fastening screw. The 3-wire lead uses the familiar red, black and white layout seen across many RC installations. In an RC car, the servo can manage steering inputs through the splined shaft and horn geometry; in a boat or other hobby mechanism, it can drive throttle or moving control parts with the same compact format. The waterproof design also suits outdoor running where spray and damp conditions are part of the session.  Warning! Not suitable for children under 14 years.

RC servos

CS-17 Digital Servo, RC servo, waterproof

€34.99

The CS-17 brings digital servo control, waterproof construction and 17 kg actuating force into a compact RC component built for precise movement in demanding model setups. With a stated speed of 0.19 sec and a JR connector on the 3-wire lead, it suits steering, throttle and brake functions where clean signal response and dependable installation matter. The housing combines black end caps with a silver centre section, and the top output shaft is metal with a splined interface for secure horn mounting. Side tabs with screw holes support fixed installation in model vehicles or boats, while the included single-arm horn and 4-arm horn offer different linkage layouts. Multiple adjustment holes on the horns make it possible to alter leverage and control travel to match the mechanism in use. Rubber grommets are included for vibration-damped mounting, and the central fixing screw secures the horn to the output shaft. In an on-road chassis, off-road build or boat hull, the servo can be assigned to the moving function that needs measured, repeatable input. The combination of digital operation, waterproof design and included mounting hardware makes the CS-17 a focused choice for hobby workbenches, replacement jobs and fresh RC builds.  Warning! Not suitable for children under 14 years.

RC servos

CS-7 Digital Servo, RC servo, waterproof

€29.99

The CS-7 Digital Servo brings fast digital control to RC installations that need crisp, repeatable movement. With a stated transit time of 0.17 s, this regular-size servo suits steering, throttle or other control functions where quick response and accurate linkage travel matter. The black and silver housing carries a waterproof design, adding flexibility for models that run in wet grass, on damp ground or around spray. Inside the compact case, the servo combines a 7 kg force rating with ball bearing support at the output shaft. That layout helps the spline run smoothly when the horn changes direction under load. The top output shaft accepts the supplied servo horns, including a single-arm horn and a 4-arm horn with multiple linkage holes for different geometry choices. Mounting tabs on the case and the included rubber grommets support secure installation in a chassis, frame or other model structure. The attached 3-wire lead uses a JR plug for connection to compatible radio systems. In cars, boats, aircraft or other hobby mechanisms, the CS-7 Digital Servo fits wherever controlled rotary movement needs to be translated into precise mechanical action. Age marking: 14 years  Warning! Not suitable for children under 14 years.

RC helicopters

Cyber Copter IR 2Ch RTF, helicopter, blue

€21.99

The Cyber Copter IR 2Ch RTF blue brings a futuristic helicopter shape together with ready-to-fly handling for fast access to indoor model flying. Its slim fuselage width of 38 mm, blue finish and switchable LED position lights create a crisp look in the air, especially when flights continue into lower evening light. Infrared control keeps the handling focused on the core 2-channel functions, while the integrated gyroscope supports stable flight behaviour during turns and hovering corrections. Left and right trim adjustment allows the flight path to be tuned more precisely to the room and control input. The helicopter reaches speeds of up to 10 km/h, giving short indoor runs enough pace to feel lively without overwhelming the compact format. At 230 mm long and 95 mm high, with a rotor diameter of 190 mm, the model stays manageable in smaller spaces. The low takeoff weight of 35 g adds to that controlled character during living room or hobby room sessions. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime, and charging runs through USB for straightforward turnaround between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 x LR03 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8+

RC helicopters

Cyber Copter IR 2Ch RTF, RC helicopter, red

€21.99

The Cyber Copter IR 2Ch RTF brings compact helicopter flying into a format that is easy to start and satisfying to control. Its red fuselage, 230 mm length and 190 mm rotor diameter create a nimble indoor model that moves through living rooms, hallways or open office spaces with a light 35 g takeoff weight and a top speed of up to 10 km/h. An integrated gyroscope supports stable flight behaviour, while the infrared control system works with 2 channels for direct command over direction changes. Left and right trim adjustment allows finer correction when the helicopter drifts, helping each flight line stay cleaner across repeated takeoffs and landings. Switchable LED position lights can be activated from the transmitter, which keeps the model clearly visible when room light drops at dusk. The built-in 3.7 V / 150 mAh LiPo flight battery delivers up to 8 minutes of runtime per charge, and USB charging keeps turnaround simple between sessions. The ready-to-fly setup keeps the focus on flying rather than preparation, with the model, remote control, USB charger and 3 x LR03 / AAA transmitter batteries included. Recommended from 8 years. Short practice runs around furniture, controlled hovering in open floor space and evening laps with the LEDs switched on all suit the compact format well.

RC helicopters

Cyber Copter IR 2Ch, RC helicopter, RTF

€21.99

The Cyber Copter IR 2Ch brings compact helicopter flying into a ready-to-fly format with a modern grey fuselage and a focused control layout. At 230 mm long, 95 mm high and with a 190 mm rotor diameter, this RC helicopter stays compact enough for indoor sessions while reaching speeds of up to 10 km/h. Its flight system combines infrared control with 2 channels for clear directional input, and the integrated gyroscope helps keep movement steady once airborne. Fine tuning comes from individually adjustable left and right trim, allowing the flight path to be corrected to suit the room and the handling style. The switchable LED position lights are activated from the transmitter, making the model easier to track visually when the light drops at dusk. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime per charge, and the USB charger keeps charging straightforward between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8 Years

RC helicopters

Cyber Copter Rescue, RC helicopter, 2.4GHz

€25.99

The Cyber Copter Rescue brings compact rotor flight into a ready-to-fly format with a futuristic body, a 190 mm rotor diameter and a 2-channel 2.4 GHz radio system. At 230 mm long, 95 mm high and only 35 g in takeoff weight, the model is sized for controlled indoor flying, where short lift-offs, hovering practice and gentle turns can happen in a smaller space. Its 3.7 V 150 mAh LiPo flight battery delivers up to 8 minutes of runtime and supports speeds of up to 10 km/h. Charging runs via USB, making the battery easy to top up from common USB power sources between sessions. The transmitter operates the flight direction and the LED position lights, while the trim function allows left and right correction to match the room and handling input. The integrated gyroscope works continuously in the background to steady the helicopter during flight. Included in the set are the ready-to-fly model, the 2.4 GHz remote control, a USB charger, 3 LR03 AAA transmitter batteries and a manual. The age marking is 8 years. Short practice flights in a living room, hobby room or other indoor area suit the compact dimensions well, especially when learning how throttle and steering interact in the air.

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flip

€25.99

Compact dimensions and quick-response controls give the Cyber Drone IR RTF a lively indoor flight character, with a 125 mm length, 135 mm width and 150 mm diameter that keep the quadcopter agile in smaller spaces. The 45 mm rotor diameter and 50 g ascent weight support a light, nimble feel in the air, while the red finish and blue LED lighting make the flight path easy to follow during turns and short hovering runs. The control setup focuses on clear handling rather than complexity. Individually adjustable trim allows left and right correction when the quadcopter drifts, and the gyro helps keep movements more settled during take-off, hovering and directional changes. A button-triggered Coming Home function returns the quadcopter to its home point, adding a direct control shortcut during indoor sessions. The 360° flip function brings a distinct stunt element, and the 3 speed settings make it easy to switch between measured practice laps and faster reactions. 8Y+. With an 8 minute flight time, the model suits short flying sessions in living rooms, hobby spaces or other open indoor areas where compact manoeuvres and quick turns come into play. A replacement battery with 3.7 V, 600 mAh and Molex connector is available separately for extended session planning

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a format built for quick lift-off and controlled indoor sessions. Its 125 mm length, 135 mm width and 150 mm diameter keep the frame small and nimble, while the 45 mm rotor diameter and 50 g ascent weight support a light, responsive feel as the orange drone moves through turns, short climbs and hovering passes. The Coming Home function returns the quadcopter to its home point at the touch of a button, adding a clear control step during flight. Flight time reaches 8 minutes per charge, powered by the included 3.7 V 600 mAh LiPo flight battery. The ready-to-fly package also includes the IR remote control and a USB charger, so the core flying equipment is already part of the set. EN 71, EN 62115 and EN 4709-001 compliance is stated in the product data, and the age marking is 8 years. Short practice flights, button-triggered flips and pace changes across the 3 speed levels give each session a distinct rhythm. Blue flashing LEDs stay visible as the drone circles through a room, rises for a quick stunt, then settles back into controlled directional inputs.

Model trucks

DAF 95 Master Truck 1:24 scale model kit

€59.99

The Italeri 1:24 DAF 95 Master Truck ZgM captures the flagship character of the Concept 95/380 in a scale model kit shaped around the high-roof Space Cab tractor unit. The cab-over layout, tall roofline and three-axle rear arrangement give the finished truck the distinctive long-haul stance that made the original DAF 95 stand out on European roads. The full-size vehicle was developed as a further step in the Space Cab series, and this kit reflects that more advanced design through its body lines, grille treatment and marked 95 380 ATI identity. The original truck paired a 6-cylinder ATI Advanced Turbo Intercooling engine with a soundproof cabin and advanced shock absorbers, details that define the character of the subject being built here. Visible truck elements such as the side mirrors, steps, tank sections, rear mudguards and under-run protection help create a more complete tractor-unit silhouette once assembled. The included decal sheet extends that realism with cab stripes, instrument panel details, country plates and small service markings. With a stated assembly time of 600 minutes, the build lends itself to a steady bench session where painting, decal placement and final detailing shape the result. Paints are required separately. Once completed, the model fits naturally into truck collections, workshop shelves or transport dioramas, where the Space Cab profile and fifth-wheel layout give it a clear heavy-haul identity.  Warning! Not suitable for children under 14 years.

RC tires & rims

Desert W.4x Tyre Wheel Set, RC wheels

€33.99

The Desert W.4x Tyre Wheel Set brings a rugged off-road look to RC vehicle builds with black tyres, black multi-spoke rims and a tread pattern cut for rough terrain. In the workshop or at the track, the set gives scale-focused off-road models a more purposeful wheel setup with a strong visual link to crawler and desert-style machines. The tyre surface shows deep, widely spaced tread blocks that are shaped to work across loose ground, gravel and uneven sections. Beadlock-style rim detailing adds a technical appearance around the outer edge, while the central mounting hole marks the set out as a running component rather than a display part. The sidewall styling visible on the tyres reinforces the off-road character and gives the wheels a more realistic scale presence once fitted. With tyre and rim already combined, the set concentrates on one of the most visible areas of an RC build and changes both stance and terrain focus in a single swap. On shelf-built crawlers, trucks or other off-road RC models, the wheel set suits projects that aim for a tougher terrain profile and a more planted visual finish. It also works well as a replacement set when an existing build needs fresh wheels with a deeper tread layout for rougher running conditions.

Model aircraft

Dornier Do 217 K-1/K-2 Aircraft Kit 1:72

€36.99

The Italeri Dornier Do 217 K-1/K-2 with Fritz-X guided bombs captures a distinctive World War II aircraft in 1:72 scale, combining the broad wing layout, twin-engine configuration and glazed nose of the Luftwaffe bomber in a detailed plastic kit. The subject represents the Do 217K variant, developed with a reinforced fuselage, redesigned wing surfaces and upgraded engines, and adapted to carry the Ruhrstahl SD 1400 Fritz X on an underwing pylon. The build is shaped around multiple injection-molded sprues with finely engraved surface detail, separate fuselage halves, wing sections, propellers, landing gear parts and transparent canopy elements. These clear parts help define the cockpit area and nose glazing, while the external stores and pylon components give the finished aircraft its characteristic guided-bomb configuration. The decal sheet, screen printed by Cartograf, is arranged for 6 versions and adds crosses, code letters, serial markings and maintenance stencils for a more complete historical finish. Figures are not included. On the workbench, the combination of structural airframe parts, clear glazing and detailed markings supports a focused aircraft build with plenty of painting and finishing work. Once assembled, the 1:72 scale format suits shelf display, diorama use or a line-up with other historic aircraft subjects from the same era.  Warning! Not suitable for children under 14 years.

RC brushless motors

Dragster Turbo 2.0, brushless set, 1:10

€59.99

The Dragster Turbo 2.0 brushless set brings a matched drive upgrade to 1:10 RC models with a 2600 kV sensorless brushless motor and a 60 A waterproof ESC. With a no-load speed of 20,720 RPM and short-term output of about 310 W, the set is built for hobby setups that call for stronger acceleration and a more direct throttle feel. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, giving clear reference points for installation planning in suitable chassis. Its continuous current is 42 A. The ESC adds 80 g and is designed for 2S LiPo or 6-cell NiMH batteries at 7.4 V. A forward, brake and reverse function is integrated, and the controller handles 60 A continuous current with 360 A peak current. The T-Plug connector defines the battery-side connection, while the included switch module and receiver lead support standard RC wiring layouts. This set suits rebuilds, performance-focused replacements and fresh 1:10 projects where motor and controller need to work as a coordinated pair. A brushless motor, speed controller and instructions are included. A battery pack, charger and radio gear are required separately.  Warning! Not suitable for children under 14 years.

Pinions & gears

Drakuro Center Differential, RC spare part

€41.99

The center differential with spur gear is a dedicated drivetrain spare part for the Drakuro platform from Carson Modelsport. Listed for the 1:8 4WD chassis and described as a center differential with main gear, it targets the transmission area where power is managed within the named vehicle layout. As a models supplies component, this part is intended for repair, servicing, or replacement work on the specified chassis rather than as a universal fitment. The data links it directly to the Drakuro BL 3S series, including the Anthracite/Red version 500409096 and the Blue version 500409097, which helps place the part within the correct vehicle family. The combination of center differential and spur gear identifies a core drivetrain assembly used in the middle section of the chassis. In workshop use, this kind of replacement part supports planned maintenance after regular running sessions or the renewal of worn transmission components on the matching Drakuro model. For hobby benches focused on keeping a 1:8 4WD vehicle ready for the next outing, the named chassis reference gives a clear platform match.

Pinions & gears

Drakuro Differentials Front and Rear Set

€49.99

The Drakuro differential set covers both key drivetrain positions with 2 units for the front and rear of the chassis. Named in the data as Drakuro Differentials front and rear, this spare part set is aimed at 1:8 4WD running gear where the transmission layout depends on a differential at each axle. Within a 4WD chassis, the differential is the component that distributes drive across the axle while the model is under power. Replacing worn transmission parts can restore the mechanical basis the chassis was designed around, especially when both axle positions are serviced together rather than one side at a time. The set format keeps the front and rear assignment clear and suits maintenance work focused on the drivetrain rather than body or electronics parts. The product data identifies the pair specifically for the Drakuro platform, making the application more precise than a generic RC spare. This kind of replacement set fits naturally into workshop stock for repair, scheduled servicing, or rebuilding a used chassis. For hobbyists working on a Drakuro 1:8 4WD model, the 2-piece layout provides the core differential parts needed for the front and rear transmission positions in one purchase.

Pinions & gears

Drakuro Motor Pinion Gear, accessory, 12T

€8.49

The Drakuro Motor pinion gear is a steel drivetrain spare part built around a clear specification: 12 teeth, a 5 mm bore and a grub screw for fastening on the motor shaft. For compatible 1:8 4WD chassis layouts, that combination gives model-building enthusiasts a defined replacement choice when the original pinion needs to be exchanged. The steel construction focuses this part on the drive system, where tooth count and bore size need to match the installed setup. The grub screw secures the pinion on the shaft, while the 12T format provides the stated gearing reference for maintenance or repair. The product data also links this part to Drakuro BL 3S vehicle versions in anthracite/red and blue, which helps place it within the Drakuro range without overstating compatibility beyond the stated information. In workshop use, this kind of spare part belongs in routine drivetrain servicing, rebuilds after wear, or a direct replacement during ongoing running sessions. For hobby benches that stay organised by exact dimensions and tooth counts, the 5 mm bore and 12T layout make this gear easy to identify within a parts stock.  Warning! Not suitable for children under 14 years.

Model tanks

DUKW Amphibious Vehicle Model Kit 1:35 Scale

€32.99

The Italeri 1:35 DUKW Amphibious Vehicle model kit brings a landmark military transport into a detailed scale build, combining the long 6x6 layout of the General Motor CCKW-353 with the welded hull that allowed the full-size vehicle to move between ship, surf and shore. In model form, that unusual combination gives the finished subject a striking silhouette, with truck running gear set into a boat-shaped body built for amphibious operations. The original vehicle used a 4,400 cm3 6-cylinder engine, three differentials and 6 driving wheels, and those engineering roots shape the character of this kit. Horizontal rib reinforcement on the hull adds another defining visual feature, setting the DUKW apart from standard transport trucks of the period. The full-size vehicle could carry a 2,400 kg payload or 25 fully equipped troops, which explains its broad use by the U.S. Army, U.S. Marines and Allied forces across multiple theatres of war. This edition also includes a new decal sheet for 4 versions, opening several historically grounded finishing directions for the completed model. The subject suits builders drawn to WWII logistics vehicles, beach landing scenes and transport-focused dioramas. Markings linked to operations such as Normandy, Salerno, Anzio and Pacific landings give the completed build a strong historical setting, whether placed on a display shelf or worked into a larger coastal scene.

Military aeroplane models

EA-18G Growler Aircraft Model Kit 1:48 Scale

€43.99

The Italeri 1:48 EA-18G Growler brings a modern carrier-based electronic warfare aircraft into scale form with the long, twin-seat fuselage and naval jet profile derived from the F/A-18F Super Hornet. As a detailed plastic kit, it focuses on the specific configuration that sets the Growler apart, including the dedicated electronic warfare installation in place of the standard 20 mm cannon and the external stores associated with its mission. The full-size aircraft uses General Electric engines and reaches a maximum speed of Mach 1.8, with flight performance described as similar to the main carrier-based aircraft in U.S. Navy service. The real aircraft operates with a 2-man crew made up of a pilot and a WSO, and that tandem arrangement shapes the cockpit and canopy layout of the model. Marking options shown for the kit cover 3 aircraft versions, including U.S. Navy VAQ-134, U.S. Navy VAQ-137 and Australian 6 Squadron subjects. The decal sheet also extends to instrument panels, external fuel tank markings, AIM-120 details and AN/ALQ99 pod markings, supporting a more complete finishing stage. With a stated assembly time of 600 minutes, this kit suits a slower, detail-led build on the workbench and a display finish once complete. Paints, tools and cement are required separately.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH 2,2A, charger, 5-8 cells

€23.49

The Easy Charger NiMH 2,2A brings a focused charging setup to RC bench work with a 2.2 A maximum charging current, 25 W output power, and support for NiMH battery packs with 5-8 cells. Delta peak cutoff is built in, so the charger monitors the pack during charging and stops the process at the defined point for this battery type. Its AC 100-240 V input makes the unit suitable for common mains voltages, which helps when the charger moves between home workspaces, club tables, and event locations. The Tamiya charging connector keeps compatibility clear for packs that use this established plug format. Included contents are the charger, power cable, and manual. 14 years marks the recommended age. On a hobby bench, the compact specification keeps the task simple: connect a compatible NiMH pack, power the charger from the mains, and let the delta peak function handle the charge endpoint. It also fits neatly into an RC equipment setup where a dedicated charger for 5-8 cell NiMH packs is needed alongside running gear and workshop essentials.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH 3A USB-C, charger

€16.99

The Easy Charger NiMH 3A USB-C brings a compact charging setup to RC workbenches and track bags with USB-C input, NiMH support and a maximum charging current of 3 A. Designed for 4-8 cell NiMH battery packs, it combines a modern power connection with the familiar charging needs of many hobby-grade RC systems. Its input range of 9-20 V DC allows operation from compatible USB-C power supplies, adding flexibility when charging away from a fixed hobby station. Delta-peak cut-off manages the end of the charging cycle for NiMH chemistry, so the charger is built around the charging behaviour these packs require rather than a one-size-fits-all approach. The Tamiya connector gives a direct link to compatible battery packs, which keeps the setup focused on common RC battery connections. Charger, USB-C charging cable and instructions are included. In practice, this charger suits workshop preparation before a run, battery top-ups between sessions and compact transport in an RC kit. The 14 Years age marking is stated in the product data, and the charger fits naturally into hobby routines built around NiMH-powered models and accessories.

RC electric motors & controllers

Electric Motor 540 23T-BB, RC motor, 6 V

€14.99

The 540 23T-BB electric motor brings classic brushed drive technology to compatible RC vehicle builds with a clearly defined 540 format, 23 turns and 50 W output. A nominal voltage of 6 V and a working range from 4.8 to 8.4 V give model-building enthusiasts concrete figures for planning a suitable drivetrain setup around the motor. Its 19,900 rpm speed, 2.2 amp current consumption and 29 N mm torque outline how this unit is positioned within an RC system: fast enough for responsive running, yet specific enough for considered replacement or tuning decisions. The included cable adds a practical installation detail straight from the box contents, while the single output shaft and compact cylindrical housing suit the familiar layout used in many powered model vehicle applications. As a standalone motor component, it fits naturally into workshop routines such as refreshing a worn drive unit or assembling a new compatible chassis. In use, this motor suits hobby bench setups where voltage, turns and output need to be matched carefully to the rest of the electronics. The 14 Years marking places it within the hobby-focused end of the range, making it a fitting choice for model vehicle enthusiasts working on maintenance, upgrades or fresh RC builds.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Electric Motor 540 80T-BB, RC motor, 6 V

€14.99

The 540 80T-BB electric motor brings classic brushed RC drive hardware into compatible vehicle builds with a 6 V nominal voltage, 80 turns and a measured output of 15 W. Its cylindrical 540 format, output shaft and attached cable create a straightforward basis for drivetrain installation where controlled delivery and clear mechanical feedback are part of the appeal. A voltage range of 4.8 to 8.4 V opens the motor to different matching electrical setups, while the stated current consumption of 0.7 amps adds a concrete reference point for planning the drive system. The rated speed of 5,900 rpm works alongside 130 Nmm torque, giving the motor a balance that suits applications where usable pull and steady response matter alongside rotation. The included cable is already fitted to the motor, so the connection side is present from the start. Age marking: 14 Years. In an RC workshop, this motor fits naturally into replacement projects, fresh chassis builds or drivetrain changes that call for a 540-size brushed unit. It also suits hobby setups where the focus lies on matching voltage, torque and rpm figures carefully to the rest of the running gear for a well-judged result.  Warning! Not suitable for children under 14 years.

Trailers & accessories

European Tractors TYRES and RIMS 1:24 kit

€26.49

European Tractors TYRES and RIMS brings 1:24 scale wheel detail to truck model projects with a dedicated accessory kit built for European tractor units. The box contains 7 tyres and 7 rims, giving the build the specific wheel equipment needed to refine a tractor layout with front, rear, and spare wheel positions. The tyre and rim combination is designed as a detailed plastic kit, while the tyres themselves are shown as soft rubber parts for a more realistic finished appearance. The set uses 100% new moulds, supporting crisp rim structure and clearly defined wheel components during assembly. Front wheel equipment is supplied in size 385/65 R22.5, while the rear wheel equipment is supplied in size 315/80 R22.5, matching the different axle roles found on European tractor units. A decals sheet is included to apply sidewall markings and size graphics, adding another layer of scale-specific finish to the completed wheels. With an assembly time of 600 minutes, the kit suits builders who want to spend time on wheel detail rather than treating it as a background part of the model. It can be used to upgrade a tractor unit build, replace kit wheels, or add a more specific tyre setup to a 1:24 display project. Age marking: 14 Years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio system into a 4-channel transmitter built for fast, exact control on the track. High resolution signal processing and a redesigned electronic layout work together for a notably direct steering response, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. The set includes the KR-242XT receiver with long antenna for telemetry use. Its menu structure goes far beyond basic trim changes. Steering functions cover servo travel limit, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, auto-start, idle-up, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. A display, conversion calculator, VR information, sound settings and adjustable menu speed keep setup work clear at the bench between runs. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V, or a LiPo rechargeable battery 2S 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 2.4 GHz transmitter built for fast, exact control. Its redesigned electronics deliver a highly direct steering feel and, in XT Advanced Mode, transmission speed up to 3 times faster than the EX RR. The included KR-242XT receiver with short antenna completes the core setup for telemetry use. A 4-channel PWM or serial layout gives the system a broad technical base for competition-focused RC driving. Steering functions include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim or balance and servo reverse. Throttle and brake adjustment extends further with 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way switching, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The transmitter measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving a substantial handheld format for longer sessions at the track. Timer functions include lap history, trigger start, lap navigation and alarm mode for structured race practice. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately. Age 14+  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 4-channel 2.4 GHz

€439.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 4-channel transmitter built for fast, exact control. High resolution signal processing and the redesigned electronics work together for a notably direct steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. In the hand, the 240.5 x 163.0 x 107.2 mm format and 551 g weight create a substantial control unit for focused driving sessions. Its menu depth goes well beyond basic steering and throttle adjustment. Steering settings include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake functions add 3-stage forward and reverse speed, acceleration, push control, auto-start, idle-up, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way functions, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. Telemetry features cover RF mode, pairing, Real-Time ICS and battery failsafe, while timer functions include lap history, trigger start, alarm mode and lap navigation for track-focused running. The set comes with 2 KR-242XT receivers with short antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V or a LiPo rechargeable battery 2S 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC RC transmitter, 4-channel 2.4 GHz

€399.99

The EX-NEXT BASIC RC transmitter brings KO Propo control hardware into a focused 4-channel 2.4 GHz format built for fast, accurate driving. XT radio technology and newly developed electronics work together for highly precise response, with XT Advanced Mode reaching up to 3 times the transmission speed of the EX RR. The result is a notably smooth steering feel and direct control input that suits racing, competition and high-performance RC models. Its setup depth goes well beyond basic trim functions. Steering adjustment covers servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake tuning add 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, brake-in, hand brake and override. Timer functions include lap history, trigger start, lap navigation and alarm mode, while system tools add display settings, menu speed, battery information and a conversion calculator. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the unit a substantial hand-held format for track sessions and bench setup alike. The set includes 1 KR-242XT receiver with long antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery 6.6 V or a 2S LiPo rechargeable battery 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT Basic, transmitter set, 4-channel 2.4 GHz

€439.99

Fast response and fine control define the EX-NEXT Basic transmitter set for ambitious RC driving. The 4-channel 2.4 GHz system uses the XT radio standard and combines the EX NEXT master unit with LCD, Xpansion Unit 2 EXP 201, Extension Unit 2.1 Basic and Grip Unit 2 Basic in one configured setup. The electronics platform supports XT Telemetry as the factory RF mode and reaches up to 3x the transmission speed of the EX RR in XT Advanced Mode. Real-Time ICS, pairing functions, battery failsafe and a wide system menu expand the setup range beyond basic driving adjustments. The transmitter measures 240.5 x 163.0 x 107.2 mm, weighs 551 g excluding batteries and has a power consumption of 200 mA. Timer functions include trigger start, lap history, lap navigation, alarm mode and start stop control, adding useful race-day data handling alongside the driving setup. Compatible receivers are listed as KR 420XT and KR 242XT, and this version comes with 2 KR-242XT short antenna receivers. Power is supplied separately via 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery at 6.6 V or a 2S LiPo rechargeable battery at 7.4 V. The broad menu structure suits competition sessions, multi-car pit setups and detailed tuning work on performance-focused RC models.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC, transmitter, 4-channel 2.4 GHz

€419.99

The EX-NEXT BASIC transmitter brings KO Propo control technology into a focused 4-channel 2.4 GHz format built for precise RC driving. XT radio standard and high-resolution signal processing work together for very fast response and a notably smooth steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. On the bench or at the track, that combination supports direct inputs and clean corrections through technical sections. Its control architecture goes well beyond basic steering and throttle adjustment. Steering functions include servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, push control, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3-8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the transmitter a substantial hand feel for longer sessions. Model selection, model copy, model reset and 50 memory slots support fleets with different setups, while the timer menu adds start timer, trigger start, lap button and lap navigation for repeatable practice runs. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger Max 15, charger, 15A 300W

€79.99

Expert Charger Max 15 brings charging, signal measurement and bench testing together in one compact unit for RC and model-building setups. With up to 15 A charging current and 300 W on DC or 100 W on AC, it handles everyday pack management with the output needed for a broad mix of battery types. The supported battery range covers LiPo, LiHV, LiFe, LiIon and LTO packs from 1-6 cells, NiMH from 1-16 cells and Pb from 1-10 cells. An integrated 1 A balancer equalises cell voltage during charging, adding a dedicated function for lithium pack care. Beyond charging, the unit reads PWM, PPM and SBUS signals and measures both voltage and internal resistance, giving useful data for checking electronics on the bench. ESC test mode adds another practical workshop function, and the adjustable power supply broadens the device's role in model maintenance and setup work. A 2.0" IPS display with 320 x 240 pixels keeps menus and readings clear during operation. AC input from 100-240 V and DC input from 7-28 V support use in different workshop and field power situations. With dimensions of 108 x 106 x 60 mm and a weight of 350 g, the charger fits easily into RC pit gear, workbenches and transport cases. Included are 1 charger, 1 AC cable and 1 USB A to USB A upgrade cable. Age 14+  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 2A Charger Set, battery set

€44.99

The Expert Charger NiMH 2A Charger Set combines a compact charging unit with a 7.2 V 2500 mAh NiMH racing pack for RC running sessions with less downtime between uses. Its 20 W output and charging current of up to 2 A give the charger a clear, focused role on the hobby bench, while the transparent housing, ventilation slots and start stop control shown on the unit underline its workshop-ready layout. Designed for NiMH battery packs from 4 to 8 cells, the charger covers more than a single pack format and suits a range of compatible RC applications. The mains input of 110-240 V supports use with common power supplies, which makes the set practical for club rooms, home workspaces and travel between running locations. A clear status LED keeps the charging state visible during operation, and the automatic shut-off function ends the process once charging is complete. The included mains cable connects the charger directly to the power source, while the matched battery pack adds 2500 mAh capacity in a 7.2 V format. On the workbench, the set supports routine preparation before a driving session and straightforward recharging afterwards. For RC enthusiasts aged 14 years and up, it brings together charger, battery and connection standard in a compact format that fits regular hobby use.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 2A, battery charger

€22.99

The Expert Charger NiMH 2A is built for RC and model-building enthusiasts who need a dedicated charger for compatible NiMH battery packs. With support for 4-8 cells, a maximum charging current of 2 A and up to 20 W output power, it covers a practical range for regular workshop charging while keeping the setup focused and easy to handle. The charger runs on 110-240 V input voltage and connects through a TAMIYA plug, making it suitable for many established hobby battery formats. A clearly visible status LED keeps the charging state readable during use, while the Start/Stop control shown on the unit adds direct handling at the charger itself. Automatic cut off manages the charging process with a defined stop function for compatible packs. Cooling vents on the housing support airflow around the unit during operation, and the mains cable is included for immediate connection to a power outlet. On the workbench, in the hobby room or as part of a regular RC maintenance setup, this charger fits neatly into the routine between driving sessions. The set includes the EXPERT CHARGER NiMH 2A, a mains cable and a German/English manual.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 4A Charger Set, battery

€69.99

The Expert Charger NiMH 4A Charger Set combines a compact charger with a 7.2V 4000mAh NiMH racing pack for RC vehicle use and workshop-ready battery care. Automatic shut-off ends the charging process when the cycle is complete, while the status LED gives a clear visual readout during each session. The charger accepts input voltage from 110V to 240V and supports LiPo, LiHV, LiFe and NiMH battery types. Compatible cell counts cover LiPo 2-4S and NiMH 5-8 cells, opening the set to a wide range of common RC power formats. Charging current adjusts from 0.5A to 4A in 0.5A steps, so the output can be set to suit the connected pack rather than running at one fixed rate. Maximum output power reaches 50W. Included in the set are the charger, the NiMH drive battery, a mains cable and 1 XT60 to NiMH adapter cable. On the workbench, the set supports routine charging before driving sessions, battery swaps between runs and straightforward preparation of compatible packs. The included 7.2V 4000mAh racing pack also gives the set an immediate starting point for RC models that run on NiMH power. Radio gear, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Military aeroplane models

F-14A Tomcat 1:72 Aircraft Model Kit with Decals

€32.99

The Italeri F-14A Tomcat in 1:72 scale brings one of the defining U.S. Navy fighters of the 1970s through 1990s to the workbench as a detailed aircraft model kit. At 26.5 cm long, the finished jet has the long nose, twin-engine layout, twin-tail profile and tandem 2-seat cabin that made the Tomcat instantly recognizable in carrier operations and interceptor roles. This assembly kit is based on ESCI moulds and uses recessed line panels across the airframe, giving the surface a crisp engraved look that supports careful painting and weathering. The subject itself carries strong technical character: the full-size F-14A used variable-sweep wings and 2 afterburning turbofans, reached Mach 2.34 and served in air superiority duties after replacing the F-4 Phantom II. The included super decals sheet opens 4 finishing versions, with squadron markings, serials, national insignia and stencil data for different aircraft appearances. Assembly is required, with a stated build time of 600 minutes. On the bench, the 1:72 format suits focused cockpit painting, landing gear work and precise decal placement across wings, tails and fuselage panels. Once completed, the F-14A Tomcat fits naturally into naval aviation displays, Cold War aircraft collections or diorama scenes that call for a carrier-based fighter with a strong historical presence.

Military aeroplane models

F-15C Eagle Aircraft Model Kit 1:72 Scale

€22.99

The Italeri F-15C Eagle brings a modern air-superiority aircraft into 1:72 scale with a finished model length of 27.0 cm and the sharp profile that made the Eagle one of the defining fighter designs of its era. As a detailed assembly kit, it focuses on the distinctive twin-engine layout, broad wing planform and single-seat configuration that give the aircraft its unmistakable silhouette in flight and on display. This version draws on the later F-15C standard, the variant used by the U.S. Air Force, U.S. National Guard and several international air arms. The subject itself adds strong historical context, from its 1970s development for air-superiority missions to its combat use during the Gulf War in 1991. The aircraft's real-world specification also shapes the character of the build, with reference points such as the 20 mm M61 gun, a wide range of air-to-air missile options and 2 Pratt & Whitney F-100 after-burning turbofan engines capable of pushing the Eagle to Mach 2.5. A color instruction sheet supports the painting and marking process. On the bench, the kit suits builders who enjoy military aviation subjects with recognizable operational history and multiple finishing paths. The 4-version decal selection opens different marking choices, while the completed aircraft sits naturally in a collection of modern combat jets, Cold War aviation subjects or U.S. fighter types. Minimum age: 14 years

Model car kit

Fiat 131 Abarth Rally OLIO FIAT Model Kit

€39.99

The Fiat 131 Abarth Rally OLIO FIAT model kit brings a landmark competition car into 1:24 scale with the wide-arched body, bonnet and side air intakes, and the bold rally livery that made this version instantly recognisable on gravel stages. Based on the 2-door Fiat 131 sedan and reworked by Abarth, the full-size car is reflected here as a detailed assembly project with a strong motorsport character. The subject itself carries rich rally history, with the Fiat 131 Abarth competing from 1976 and earning 3 World Rally Championship constructors' titles, a FIA Drivers' Cup and a drivers' championship. That background gives the finished build a clear place in competition history rather than a generic road-car look. The kit features rubber tyres for a more convincing wheel finish, a new decals sheet for the OLIO FIAT markings and race graphics, and black acetate splash guards that match the period rally setup. The body livery is tied to one of the iconic sponsor schemes associated with international competition in that era. During the build, the cockpit, exterior trim and competition markings come together into a display piece with the visual tension of a car caught mid-stage, dust trailing behind on a narrow rally road. Assembly is required and takes 600 minutes. Recommended age: 14 years and over.

Model car kit

Fiat 500 F Upgraded Edition Model Kit 1:12

€124.99

The Italeri 1:12 Fiat 500 F Upgraded Edition model kit recreates the most classic version of the Nuova 500, the compact Fiat that became a defining sight on Italian streets. Its rounded bodywork, compact proportions and folded-roof silhouette give the finished car a strong period look, while the 1:12 scale leaves room for visible trim, interior surfaces and body contours to read clearly once assembled. This assembly kit centres on the 500 F introduced in 1965, the version noted for front-hinged doors, a new frame and a wider windscreen. The upgraded moulds support cleaner shaping across the body shell and help bring out the small car's distinctive lines. Build options for the top allow an open or closed roof appearance, so the finished car can be set to match different display preferences. Screenprinted markings add model-specific finishing detail, and the classic Fiat 500 F layout gives the build a recognisable reference point for historic car collections. On a shelf, desk or in a display cabinet, the finished model carries the character of a compact city car that shaped post-war motoring culture. The opening panels invite a closer look at the build, while the steerable wheels and suspension add extra mechanical detail during handling and presentation. Assembly time is 600 minutes.  Warning! Not suitable for children under 14 years.

Model car kit

Fiat 500F 1968 Model Kit 1:12 with Opening Parts

€129.99

The Fiat 500F 1968 model kit captures one of the most recognizable compact car shapes in 1:12 scale, building to a finished length of 25 cm. Its 100% new moulds support a sharply defined body shell, interior and exterior details, giving the classic Nuova 500 silhouette clear proportions on the bench and in a display cabinet. This assembly kit focuses on visible structure as much as outer shape. The build includes opening doors, a front bonnet and a rear bonnet, so the finished car can be shown with key panels raised rather than sealed shut. The roof can be completed in an opened or closed configuration, which changes the character of the model from a neat city-car profile to a folded-top version with more of the cabin on show. The kit also allows an Anglo-Saxon version with right-hand drive, adding a distinct interior layout option. Photoetched parts, chromed parts and rubber tires bring extra material contrast to trim, brightwork and running gear. Working suspension and steering wheels give the chassis a more technical finish, making the underbody and wheel areas as engaging as the exterior lines. During display, the model suits both closed-body presentation and open-panel setups that highlight the cabin, trim and mechanical detailing. Assembly is required, with an assembly time of 600 minutes.

Model car kit

FIAT 806 Grand Prix Model Kit 1:12 Scale

€169.99

The FIAT 806 Grand Prix model kit in 1:12 scale brings a landmark 1927 racing car into a large 30 cm format with the long proportions, exposed suspension layout and open cockpit that define early Grand Prix design. Built from upgraded Protar moulds, this assembly kit focuses on the engineering character that made the original FIAT 806 such a notable machine in motorsport history. The full-size car used a 180 HP 12-cylinder engine and was developed with major innovations in chassis, mechanics and bodywork. On the original vehicle, the engine and gearbox unit sat between the two chassis bars to optimize performance and drivability, and that unusual layout gives the model much of its technical interest during the build. More than 400 parts create a dense construction project with room for careful finishing across the body panels, cockpit and running gear. The bonnet opens on the completed model to expose the engine bay, while photo-etched parts and metallic accessories such as screws, nuts and springs bring extra definition to smaller areas. With 600 minutes assembly time, the kit suits a slower, workshop-style build where each stage can be handled with attention to fit and finish. Paints, tools and cement are required separately. Once completed, the working steering and soft rubber tires give the FIAT 806 Grand Prix a convincing period stance for shelf display, cabinet presentation or a motorsport-focused collection.

Military aeroplane models

Fiat CR 32 Freccia 1:72 Aircraft Model Kit

€17.49

The Italeri Fiat CR 32 Freccia in 1:72 scale turns one of the best-known interwar biplanes into a focused aircraft build with a strong historical profile. The assembly kit captures the compact fighter layout with stacked wings, fixed landing gear, an open cockpit and the distinctive proportions that made the CR 32 such a recognizable shape in aviation history. Designed in the early 1930s, the original aircraft used a 600 hp V-12 engine and reached 375 km/h, while its maneuverability made it a notable presence in air combat of the period. This kit draws on that background with markings for 5 versions, including aircraft from Regia Aeronautica, Aviazione Legionaria and the Hungarian Air Force. The decal sheet adds serials, insignia, crosses, tricolor panels and unit markings that support historically specific finishing rather than a single generic scheme. A display stand is also included, so the completed model can be presented in an in-flight angle once assembly and painting are complete. With assembly required and an indicated build time of 600 minutes, the model suits a slower bench session centered on fitting, painting and decal placement. The 14 Years+ marking matches the detailed format, making this a strong choice for builders drawn to classic military aviation, camouflage work and period squadron markings.

Model car kit

Ford Escort Zakspeed Gr.2 D&W 1:24 Model Kit

€37.99

The Italeri Ford Escort Zakspeed Gr.2 D&W brings a late-1970s touring car icon into 1:24 scale with a build centered on the Escort Mk 2 shape, flared arches and race-prepared bodywork. The model kit draws on the dedicated Zakspeed version used between 1977 and 1978, giving the finished car the compact proportions and aggressive circuit look associated with that period. The assembly kit uses detailed moulded parts to form the body shell, interior, chassis area and exterior details. Visible components in the kit include cockpit parts such as seats, dashboard and steering wheel, along with front grille elements, structural bars and separate tyres for front and rear fitment. The decal sheet adds a strong period finish with D&W Zakspeed graphics, sponsor markings and race numbers 20 and 21. This creates room for careful paintwork and precise decal placement across the body, windows and trim areas. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the 1:24 scale format gives enough surface area for painting details such as the light blue body, dark trim and racing markings while keeping the model manageable in size. Once completed, the Ford Escort Zakspeed Gr.2 D&W sits naturally in a collection of classic motorsport subjects, and it also offers a satisfying project for builders who enjoy historic racing cars with distinctive team livery.

Remote-controlled systems

FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz

€119.99

The FS 14K Reflex Stick Pro 4 brings a 14-channel layout, 2.4GHz transmission and a modern ergonomic RC housing into one control system shaped for complex model functions. Its carbon-look surface and illuminated logo give the transmitter a technical, workshop-ready appearance when powered on. The channel structure is designed for detailed function control. Four channels work continuously and fully proportionally for direct response through the control sticks, while channels 7, 8, 9, 10, 13 and 14 are assigned to 3-position toggle switches. Channels 5, 6, 11 and 12 operate through 3-position push buttons with centre position, creating a clear split between proportional inputs and switched functions. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply allows up to 11 V without BEC. A 15-channel receiver is listed in the included contents. For setup work, channels 1 to 4 feature servo reverse and trim, and channels 1 and 4 add dual rate for servo travel adjustment. This makes the system suitable for models that need tailored steering, throttle or auxiliary function behaviour. 100% compatibility is stated for TAMIYA MFC 01, MFC 02, MFC 03 and DMD units, which suits truck and function-model layouts with multiple switching tasks. 14 Years is stated as the recommended age.

Remote-controlled systems

FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz

€149.99

The FS 14K Reflex Stick Pro 4 LCD 2.4GHz brings broad channel control and fine setup options into one radio system built for demanding RC models. With 14 channels, an LCD layout and a 15-channel receiver in the set, it supports complex functions that go beyond basic steering and throttle, while the carbon-look finish and illuminated logo give the transmitter a distinctive technical appearance. Channels 7, 8, 9, 10, 13 and 14 use 3-position toggle switches, while channels 5, 6, 11 and 12 use 3-position push buttons with centre position. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply can reach up to 11 V without BEC. A Graupner J/R connector system is used for integration, and the radio is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as DMD units. The set includes the 14-channel LCD remote control, a 15-channel receiver and a manual. For truck, construction and function models with multiple switching tasks, the channel layout supports lighting, sound and auxiliary functions from one handset. The 14 Years marking fits advanced RC use, where stored model setups and detailed channel assignment matter during regular driving and system changes.

Remote-controlled systems

FS 6K Reflex Stick Pro, transmitter, 2.4GHz

€99.99

The FS 6K Reflex Stick Pro 4 2.4GHz brings 6-channel radio control into a layout built for detailed model setups and precise handling. Four continuously adjustable, fully proportional channels work alongside a 3-position push button on channel 5 and a 3-position toggle switch on channel 6, giving a clear control structure for driving functions and switched features. The integrated failsafe system adds an important control function for model operation. Trim for channels 1-4 supports exact correction directly at the transmitter, while dual rate for channels 1-2 adjusts servo travel for a more tailored response. The control sticks use precise, smooth mechanics, and the housing combines an ergonomic shape with a carbon-look surface and an illuminated logo when powered on. The transmitter operates at 4.8-6 V with 4 AA cells, the receiver power supply reaches up to 11 V without BEC, and the connector system uses Graupner J/R. Compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units expands the range of suitable model applications. On the bench, the channel layout supports careful setup of steering, throttle and auxiliary functions before a model heads out. During driving sessions, the separate switching options and proportional control help keep inputs clean and deliberate across different model configurations.

Remote-controlled systems

FS 6K Reflex Stick Pro, transmitter, 2.4GHz

€109.99

The FS 6K Reflex Stick Pro brings 2.4GHz radio control, a 6-channel layout and an LCD interface into one focused setup for model driving with a clear, technical feel in hand. Smooth control sticks, an ergonomic housing and a carbon-look surface shape a transmitter that suits longer sessions at the workbench and on the track alike. Channels 1 to 4 are continuously adjustable and fully proportional, while channel 6 is assigned to a 3-position toggle switch and channel 5 to a 3-position push button with centre position. The transmitter stores 15 model memories, making it easier to keep separate configurations ready for different vehicles. For channels 1 to 4, servo reverse changes direction of movement, trim corrects neutral position, dual rate adjusts servo travel, EPA limits servo travel and EXP changes response characteristics around centre input. The receiver power supply can reach up to 11 V without BEC, and the system is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as the DMD unit. A 6-channel receiver and manual are included. 4 AA cells are required separately for the 4.8 to 6 V transmitter operating voltage. With a minimum age marking of 14 years, this radio set fits hobby-focused RC setups where multiple channel functions, stored profiles and detailed response adjustment matter during driving and setup.

Model figures

Gauls Warriors 1st Century Model Figures 1:72

€10.99

Gauls Warriors 1st Century brings 1:72 scale historical modelling into a broad army set with 40 unpainted figures and 98 parts to assemble. The mix of warrior poses, separate shields and period equipment gives battle scenes a dense, active look, whether the figures stand in a charging line, guard a woodland pass or build out a larger ancient campaign display. The set draws on Gallic tribes from the areas of modern France, Switzerland, Belgium and Holland, placing the figures in the period of Caesar's campaigns and the leadership of Vercingetorix. Longswords and decorated shields define the visual identity of the warriors, while the varied stances help break up repetition across the group. The unpainted finish leaves room for custom colour work on clothing, shields and weapons, and the reference artwork shows patterned trousers, shield motifs and contrasting tones that can shape a more individual force. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a cabinet or across a terrain board, the figures can form a tribal war band, oppose Roman units or extend an existing ancient collection with more infantry depth. The 1:72 format also works well for builders who want to stage the Battle of Alesia or create original scenes with clustered shields, advancing spears and scattered command figures.

Model tanks

German Guns Set Model Kit 1:72 with 8 Figures

€12.99

The German Guns Set brings 3 artillery subjects together in 1:72 scale, combining PAK35, PAK40 and FLAK38 builds with 8 figures for a compact military scene that develops step by step on the workbench. Each gun adds a different silhouette to the finished layout, so the set can be arranged as a focused display with crews placed in firing, loading or support positions. As an assembly kit, this set suits builders who enjoy a longer project, with a stated assembly time of 600 minutes. The 1:72 format keeps the proportions tight and manageable while still leaving room for distinct gun shields, carriages, barrels and crew placement across the 3 models. The included figures help break up the composition around each emplacement and give the finished scene more depth than a guns-only build. Paints and cement are required separately. On a shelf, in a cabinet or as part of a wider World War II diorama, the completed set creates a layered arrangement with multiple focal points rather than a single vehicle or weapon. The shared 1:72 scale also makes it easier to combine the finished guns and figures with other military builds in the same collection.

Military figures & accessories

German Infantry Winter Uniform Figure Set 1:72

€12.49

The Italeri German Infantry Winter Uniform Figure Set 1:72 brings World War II winter troops into compact scale with 36 unpainted figures shaped from 100% new moulds. Across a snowy diorama, trench section or battlefield display, the varied stances create the look of movement, cover and coordinated advance rather than a repeated row of matching soldiers. Each figure starts as an assembly kit, leaving room for careful preparation, painting and finishing work across helmets, coats, equipment and weapons. The 1:72 scale makes the set easy to combine with vehicles, artillery pieces and terrain built to the same proportion, so the figures can anchor a wider historical scene. Because the parts are unpainted, camouflage tones, shading and weathering can be matched to a chosen theatre or season. The new mould tooling also supports sharper separation between uniform layers and field gear, which helps brushwork stand out once painted. With a stated assembly time of 600 minutes, this set suits builders who want a longer project rather than a quick tabletop addition. The mix of standing, kneeling and prone positions gives flexibility when arranging snowbound defences, advancing infantry groups or support weapon placements, whether the figures are used as the centre of a display or to complete a larger World War II layout.

Model tools

GlueBrush-Set with 3mm Nano Tips, model tool

€13.39

Precise adhesive placement can make the difference between a clean assembly and visible excess on a finished model. The GlueBrush-Set with 3 mm Nano Tips is built for controlled glue work on small contact areas, bringing a finer application point to detailed model-building tasks. The set format combines a GlueBrush applicator concept with 3 mm Nano Tips, giving model builders a concrete tool for directing adhesive onto narrow joins and small parts. That focused application helps when working around edges, seams and compact assemblies where broad glue spread can interfere with the finish. In repair work, touch-up steps or fresh builds, the smaller tip size supports a tidier workflow on parts that need accuracy rather than volume. The 3 mm tip dimension is the key working detail here, because it suits jobs where placement matters more than coverage. On the workbench, this set fits careful assembly sessions with scale models and hobby projects that call for neat glue control on fine components. The age marking 14 Years is stated in the product data.

Model tools

GlueBrush-Set, model supplies, 13 mm nano tips

€13.39

The GlueBrush-Set with 13 mm nano tips is built for adhesive work that calls for a finer touch on model-building projects. Its compact tip format helps place glue on small contact areas, narrow seams and delicate parts where broad applicators can leave excess material behind. Within model supplies, this set supports controlled handling during assembly, touch-up and repair work on miniature components. The 13 mm tip length gives access to confined spots around edges and joins, making it easier to guide adhesive exactly where the bond is needed. That focused application can help keep surrounding detail cleaner on small-scale builds and reduce smearing across adjacent surfaces. Because the set is centred on precision rather than volume, it fits tasks that involve careful placement on trim, fittings and other fine sections. On the hobby bench, the GlueBrush-Set works well alongside regular building tools when a project reaches the stage for neat adhesive application. It also suits maintenance sessions where a small part, seam or detail piece needs accurate glue placement without flooding the area.

Model tanks

GMC 2 1/2Ton.Truck D-Day 80th Ann. 1:35 Kit

€25.99

The Italeri GMC 2 1/2Ton.Truck D-Day 80th Ann. brings a key World War II transport vehicle into 1:35 scale, centering the build on the truck that formed a major part of U.S. Army logistics after the Normandy landings. The subject combines the familiar cargo configuration with the visual presence of a 6x6 military truck, giving the finished model a strong convoy and field-service character. This detailed assembly kit draws on a vehicle known for its robust structure, reliable service and effective suspension design. The six-wheel-drive layout is part of what made the original truck so useful on rough ground, and that mechanical identity carries through in the model's stance and proportions. The GMC 2 1/2 ton truck appeared in numerous variations, including cargo versions with open or closed cabins as well as long and short wheelbase forms, and this edition focuses on the wartime transport role tied to the D-Day 80th anniversary theme. Assembly is required. Paints, cement and tools are required separately. On the bench, the military markings and olive drab finish open up a classic WWII painting approach, while the completed truck fits naturally into Normandy-themed displays, supply column scenes or broader U.S. Army collections. The 1:35 scale also pairs well with other military vehicle builds from the same era, whether the model is placed as a standalone transport truck or as part of a larger historical diorama.  Warning! Not suitable for children under 14 years.

Military figures & accessories

Hartenstein Hotel Battle Set Model Kit 1:72

€79.99

Hartenstein Hotel is a 1:72 Battle Set from Italeri that recreates a September 1944 Operation Market Garden scene around one of the best-known Arnhem locations. The centrepiece is the Hartenstein Hotel, built from MDF laser-cut parts that form the multi-storey structure with window sections, facade details and architectural panels for a substantial battlefield backdrop. Around the hotel, the set combines 100 figures in total, with 50 British Paratroopers and 50 German Infantry for opposing forces across streets, entrances and defensive positions. A Willys Jeep and a Sturmgeschutz III are included as fast assembly models, adding 2 vehicle types that can anchor patrol, support or assault scenes. Extra battlefield buildings and accessories broaden the layout with a checkpoint, sandbag station, infirmary and watchtower, so the scene can be arranged with clear routes, cover points and elevated positions. Assembly is required, and the stated build time is 600 minutes. Once assembled, the set supports broad diorama layouts with the hotel as the focal structure and the smaller scenery elements spread around it to shape a perimeter or street approach. The 1:72 scale also makes the scene suitable for display shelves, historical tabletop setups or a dedicated WWII arrangement where figures, vehicles and buildings work together in one coherent setting.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Heinkel HE-111H-6 Aircraft Model Kit 1:72

€34.99

The Italeri Heinkel HE-111H-6 brings a well-known twin-engine bomber into 1:72 scale with a detailed plastic kit that highlights the aircraft's fully glazed nose, broad wing planform and unmistakable tail profile. At 22.7 cm long, the finished model has a balanced display size that shows the shape clearly without demanding a large footprint. This assembly kit is built around a historical aircraft subject that formed a major part of Luftwaffe bomber operations in the early years of the Second World War. The original Heinkel He-111 used 2 Jumo 211 engines and reached a maximum speed of 440 km/h, while its internal loading bay could carry up to 2,000 kg of bombs. Those background details give the build context when working through the airframe, glazing, engines and external stores. Super decals for 5 versions expand the finishing possibilities, and the color instruction sheet supports accurate placement of markings and camouflage across different schemes. The 600-minute assembly time suits model builders who enjoy a more involved aircraft project with painting and decal work as part of the process. On the bench, the 1:72 format keeps handling practical during construction, and once completed the Heinkel HE-111H-6 sits naturally alongside other military aircraft in the same scale for display or collection. Age 14+

Model tanks

HEMTT Gun Truck Model Kit 1:35 with Decals

€41.99

The Italeri 1:35 HEMTT Gun Truck model kit brings the heavy military transport platform into a build focused on armour, scale presence and field conversion detail. With a finished length of 28.0 cm, the truck's long 8-wheel layout gives the completed subject a commanding footprint that suits both shelf display and convoy diorama scenes. The HEMTT name stands for Heavy Expanded Mobility Tactical Truck, a vehicle range introduced for the United States Army from the mid-1980s. This version reflects the gun truck conversions developed for escort and convoy protection duties, with added defensive structures around the cab and rear section. The kit is described with fully upgraded moulds, supporting cleaner definition across the body panels and helping painted details stand out once the build is complete. Decals for 1 version add operational markings that reinforce the technical, service-used appearance of the truck. The assembly kit is recommended for ages 14+ and has a stated assembly time of 600 minutes. Figures are not included. On the workbench, the combination of large structural sections and smaller finishing details creates a measured, step-by-step build. Once completed, the HEMTT Gun Truck fits naturally into modern military collections, desert vehicle displays and scenes built around transport, escort or protected movement roles.

Military aeroplane models

Hercules C-130J C5 Aircraft Model Kit 1:48

€79.99

The Hercules C-130J C5 from Italeri brings the familiar shape of the Hercules into a 1:48 aircraft model kit with the updated features of the later transport aircraft. At 62.1 cm long when completed, the finished build gives the high wing, tall fin and broad fuselage the visual weight that suits a large military airlifter on the bench or on display. This assembly kit focuses on the reworked C-130J configuration rather than an earlier Hercules version. The airframe is defined by 4 Rolls-Royce Allison AE2100D3 engines, each rated at 4700 HP, paired with 6-blade composite-material propellers. The cockpit reflects the avionics update with digital instruments and a Head-Up Display, so the model captures both the external and internal changes that marked the C-130J generation. A super decals sheet is supplied for 4 versions, supporting different finishing options with service markings, serials and stencil data. The subject represents the transport aircraft that has become standard in many NATO countries, including Italy. Long building sessions, painting work and decal placement make this kit suited to model makers who enjoy large aircraft subjects with visible structural presence. Paints, cement and tools are required separately.

Model tools

IronPoint Brush 1.0 mm Ball, model paintbrush

€8.49

The IronPoint Brush 1.0 mm Ball brings a fine-format painting tool to model work where small areas and controlled handling matter. Its 1.0 mm ball tip gives hobby benches a focused option for placing paint on compact sections, edge lines and detail zones that benefit from a smaller contact point. Within model finishing setups, a brush like this supports careful colour work without shifting into broad coverage. The ball tip format suits measured application on parts that need accuracy rather than speed, making it useful for touch-ups, narrow accents and small painted elements. The slim working size also fits projects where different brush widths are used across separate stages, with the 1.0 mm format covering the finer end of that workflow. As a model supplies tool, it belongs alongside paints and other finishing essentials used to refine surface details. On the workbench, the brush suits detail passes on scale components, figures or decorative sections where clean placement counts. It also fits follow-up painting after assembly, when smaller areas need careful finishing or colour correction.

Model tools

IronPoint Brush 1.4 mm Ball, model brush

€8.89

The IronPoint Brush 1.4 mm Ball brings a fine, controlled tool into model finishing, with a ball-shaped 1.4 mm tip that suits careful paint placement on small sections and detailed surfaces. In a hobby workspace, it fits naturally beside paints and parts where neat edges and measured brush movement matter. Its single-brush format keeps the choice straightforward when a specific tip size is needed for touch-ups, accents or compact painted areas. The ball tip shape supports close work around contours, raised details and narrow sections that benefit from a smaller contact point. For model-building enthusiasts, that makes it useful during colour application on figures, accessories or body details where broad coverage would be less precise. The product data states an assembly time unit, voltage unit and operating time unit at database level, but no usable values are provided for this brush, so the copy stays focused on the confirmed brush specification. On the bench, the IronPoint Brush can move from small correction work to deliberate detailing passes without changing to a larger format. The stated age marking is 14 Years, and the 1-brush pack suits replacing a worn detailing tool or expanding an established painting kit with a dedicated fine-tip option.

Model tools

IronPoint Brush 2.0 mm Ball Hobby Tool

€8.99

IronPoint Brush 2.0 mm Ball is a precisely designated hobby tool from the Carson Modelsport range, defined in the data by its 2.0 mm ball format and single-piece pack count. That clear specification gives model-building enthusiasts a concrete reference when selecting tools for bench work that calls for a named tip size and shape. The available data is intentionally compact, so the description stays close to the verified facts. Both the ShortDescription and ShortDescriptionMM fields identify the same IronPoint Brush 2.0 mm Ball designation, which supports consistent catalogue recognition and straightforward matching when replacing an existing brush or adding a specific format to a workshop setup. The age marking is 14 Years, stated exactly as provided. The pack count is 1, making this a single brush rather than a multi-piece set. Within a model-building workspace, a clearly labelled 2.0 mm ball brush suits organised tool selection, whether the aim is maintaining a dedicated bench assortment or keeping a known format ready for repeat tasks. The concise specification makes this version easy to identify in storage, workshop drawers or project planning where exact naming matters.

Model tools

IT Plastic Modelling Beginner Tool-Set by Italeri

€13.99

The IT Plastic Modelling Beginner Tool-Set from Italeri gathers 4 essential workshop tools into one focused starter set for plastic kit building. A brush, cutter, file and angled tweezer support the key hands-on steps that shape a cleaner build, from separating parts and refining edges to placing small components and handling detail work at the bench. The metal tweezer is suited to controlled pickup and placement where fingertips can block access to narrow contact points. The cutter helps remove parts during preparation, while the file works on edge cleanup and small surface corrections before joining sections. The brush adds a finer tool for detail painting and careful application on smaller areas. Together, these tools cover several of the routine actions that appear again and again during model assembly, making the set a practical entry point for builders who are starting with plastic kits. Assembly is required, with a stated assembly time of 600 minutes. The set fits naturally into work on scale models, miniatures and other detailed assembly projects where trimming, smoothing, positioning and fine brushwork all play a part in the finished result.

Model brushes

Italeri 00 Brush Synthetic Flat Single Pack

€1.59

The Italeri 00 Brush Synthetic Flat Single Pack brings a narrow flat tip into detailed painting work, with short synthetic bristles that help place colour cleanly on small sections, edges and fine surface areas. The slim brush head and metal ferrule create a precise working end that suits careful coverage where a larger brush would be less exact. Its flat profile is useful for controlled strokes across raised details, trim lines and compact panels, while the short bristle length supports a steady response during close work. The dark blue handle gives the brush a clear, classic workshop look, and the orange bristles make the tip easy to read while loading paint and guiding each stroke. As listed in the product data, assembly is required and the stated assembly time is 600 minutes. The included component is an assembly kit. The age marking is 14 Years. This brush fits naturally into model benches, miniature painting sessions and other craft setups where a defined flat edge is needed for neat colour placement. It also works well as a dedicated shape for touch-up tasks, detail coats and other small-scale finishing steps within a longer painting routine.

Model brushes

Italeri 000 Synthetic Flat Brush Single Pack

€1.49

The Italeri 000 Synthetic Flat Brush Single Pack brings a precise flat tip to model painting, with synthetic bristles shaped for controlled colour application on small sections and fine edges. Its compact brush head suits assembly kit work where narrow parts, raised details and tight corners need a cleaner stroke than a larger brush can deliver. The flat 000 format supports short, deliberate passes rather than broad coverage, making it useful for touch-ups, edge definition and careful blocking of small painted areas. A metal ferrule secures the bristles to the handle and gives the brush a familiar hobby-tool structure for steady handling during close work. The single-pack format adds one specific brush shape to an existing painting setup without duplicating larger sizes or mixed assortments. Assembly is required for the related kit context, with an assembly time of 600 minutes stated in the product data. On model benches, this brush fits moments where a narrow flat edge helps guide paint along panel lines, trim sections or compact surface details. It also suits finishing stages that call for measured coverage on small parts, where a fine synthetic tip can place paint with more control than a wider flat brush.

Model brushes

Italeri 1 Brush Synthetic Round Single Pack

€1.79

Italeri 1 Brush Synthetic Round Single Pack brings a focused tool shape to detailed hobby painting, with synthetic bristles gathered into a fine round point for controlled work on narrow lines, edges and small painted sections. The dark blue handle, silver metal ferrule and orange tip give the brush a clear workshop look while keeping attention on the slim profile that suits close, careful application. The pointed head shown in the product data supports paint placement where broader brush shapes would spread colour too widely across a surface. The ferrule secures the bristle bundle at the transition from handle to tip, helping the brush keep its narrow working shape during detail work. As a single-pack brush, it fits naturally into an existing modelling or craft setup when one precise round profile is needed rather than a larger mixed set. Assembly is required, and the product data states an assembly time of 600 minutes. On model benches, craft tables and painting stations, this brush suits sessions that call for measured strokes on small parts and defined painted accents. The 14 Years age marking is stated in the product data for this assembly kit.

Model tanks

Italeri 15cm Panzerwerfer 42 auf SWS Kit

€31.99

Italeri 15cm Panzerwerfer 42 auf SWS Kit brings a World War II half-track rocket launcher into 1:35 scale with a detailed plastic assembly project and a finished model length of 198 mm. The combination of the Schwerer Wehrmachtschlepper chassis and the elevated 15 cm launcher gives the build a strong mechanical profile, from the front wheel and armored cab to the rear track units and launch platform. The original vehicle was developed from the SWS as a medium half-track used for supply transport and light artillery towing, then adapted for other battlefield roles on its rear load area. In this version, the rear section carries a 10 barreled 15 cm Nebelwerfer 42 mounted above an armored ammunition storage compartment, which sets this subject apart from standard transport variants. The plastic kit format gives close attention to the contrast between the sloped armor, the open running gear layout and the compact launcher assembly. A new decal sheet adds technical markings, crosses, registration numbers and version-specific details for 2 finishing options. Across the workbench, the 600 minute assembly time supports a more involved build with room for careful painting, marking placement and subassembly work. Once completed, the 198 mm model fits naturally into a 1:35 military collection, whether placed alongside other half-tracks, artillery subjects or late-war armored vehicles.

Military aeroplane models

Italeri 1:12 F-104G Cockpit Model Kit

€34.99

Italeri 1:12 F-104G Cockpit Model Kit brings the Starfighter's crew station into close focus with a build centered on the aircraft's distinctive instrument layout and seat arrangement. At 1:12 scale, the cockpit section reaches 14.7 cm in length and 9.0 cm in width, giving the finished assembly enough presence for the analog panels, side consoles and structural forms to read clearly. The kit contains 124 parts and is designed as an assembly project for ages 14 years and up. The subject draws on the Lockheed F-104 Starfighter, an interceptor known for its slender fuselage, compact wing area and service life that stretched from the late 1950s into the mid-2000s with some air forces. Inside the cockpit, the period character comes through in the detailed controls, the instrument panel layout typical of 1950s and 1960s fighters, and the accurately reproduced Martin Baker Mk.I Q ejection seat. Decals supply the cockpit dials, while adhesive acetate silk seat belts and clear parts for the visor, gunsight and radar scope add further finishing detail. Assembly time is listed at 600 minutes, making this a substantial bench project built around painting, fitting and detailing rather than a quick weekend build. The completed cockpit section suits display on a shelf, in a cabinet or alongside other aviation subjects, where the concentrated interior detail can be viewed from multiple angles.

Model trucks

Italeri 1:24 Container Auflieger 40Ft Kit

€58.99

Italeri 1:24 Container Auflieger 40Ft is a detailed plastic kit that brings a standard freight trailer into scale form with a 50.5 cm finished length and the long proportions of a 40 ft container setup. The subject draws on the container format used across ships, trains and trucks, so the completed build carries the look of real intermodal transport into a shelf display or diorama scene. The assembly kit focuses on the structure and finish of a commercial trailer rather than a racing or military vehicle. Molded parts form the chassis, underframe and running gear, while the container body adds the tall corrugated profile seen in modern freight handling. The decal sheet goes beyond large side logos by adding technical capacity markings, caution labels, speed signs and multiple registration details that sharpen the industrial character of the model. A color instructions sheet guides the painting stage, and the stated assembly time of 600 minutes makes this a substantial bench project with room for careful fitting, painting and decal placement. Placed beside a warehouse backdrop, loading bay or road transport scene, the finished trailer suits modern logistics layouts with a clear commercial theme. It also works as a companion build for 1:24 truck subjects, where the container trailer adds scale length and freight context to a complete transport combination.  Warning! Not suitable for children under 14 years.

Model trucks

Italeri 1:24 Volvo FH4 Globetrotter XL Kit

€74.99

The Italeri 1:24 Volvo FH4 Globetrotter XL kit brings a modern long-haul tractor unit into scale form with 100% new moulds, a 24.6 cm finished length and the tall Globetrotter XL cab that defines the full-size truck's road presence. The plastic kit captures the FH4's aerodynamic shape while giving the build a strong visual focus through the high-roof cabin, the chassis layout and the distinctive Volvo front end. Beyond the outer bodywork, the kit develops its detail through several separate areas of the truck. The driver door can be built open or closed, which changes how the interior is presented in the finished model. The cab structure also supports a more technical display of the truck's architecture, while the detailed engine and frame add substance beneath the body. Waterslide decals supply FH Year Edition graphics, dashboard markings, country identifiers and multiple European-style registration options, allowing different finishing directions within the same subject. The box also contains photo etched parts for finer metal-style detail. On the workbench, this 1:24 truck kit suits a measured build with painting, decal placement and detail finishing spread across stages rather than rushed into one session. Once completed, the Volvo FH4 Globetrotter XL sits naturally in a commercial vehicle collection, on a shelf beside other 1:24 transport subjects, or as a standalone display focused on modern European truck design. Paints, cement and tools are required separately.

Model tanks

Italeri 1:35 1/4 Ton 4x4 US Ambulance Vehicle

€11.99

Italeri 1:35 1/4 Ton 4x4 US Ambulance Vehicle captures a field-converted military jeep in a compact 11.8 cm scale model that brings the ambulance role of this well-known 4x4 into clear focus. The assembly kit centers on the distinctive rescue layout, where the familiar open vehicle form is reworked with stretcher-carrying structures and medical insignia for a markedly different silhouette. The 1:35 scale suits detailed finishing work, especially across the body panels, grille, wheels, cabin area, and external ambulance fittings visible in the kit presentation. Decals for 2 versions open two historically themed directions, covering U.S. 2nd Armoured Division Normandy 1944 and British Army Normandy 1944. That choice changes the final look through unit markings and insignia rather than altering the core vehicle, which keeps the build focused while still offering variation. Assembly takes 600 minutes, giving time for careful handling of the construction stages and for a measured paint approach across the military surfaces and medical markings. On a shelf, the completed ambulance jeep reads clearly as a support vehicle rather than a standard utility 4x4, with its stretcher layout setting the scene at a glance. In a 1:35 display, it can anchor a Normandy-themed arrangement, sit beside other military vehicles, or stand alone as a compact historical model with a strong service identity.

Military figures & accessories

Italeri 1:35 20' Military Container Model Kit

€21.99

The Italeri 1:35 20' Military Container model kit brings a standard military logistics element into scale scenes with a completed length of 17.4 cm, corrugated wall panels and detailed end-door hardware that gives the container a convincing industrial look. One end door can be shown opened, adding visible access to the interior and giving loading bays, transport yards and support areas a more active layout. This assembly kit is based on a 100% new mould and centers on the structure of a real 20-foot freight container, a format used across ship, rail and truck transport because its standardized dimensions support intermodal handling. The model translates that familiar full-size form into 1:35 scale for military dioramas and vehicle displays. Decals for 3 versions provide specific marking paths for U.S. Army, U.S. Marine Corps and Italian Air Force finishes, including ownership markings, serial codes and load data panels. Assembly time is listed as 600 minutes. Paints, cement and tools are required separately. Placed beside military vehicles, stacked in a depot scene or used as a standalone cargo detail, the container adds context that connects transport, storage and ground support activity. The open-door option also suits loading or maintenance setups where the interior needs to remain visible during display.

Military figures & accessories

Italeri 1:35 Observation Post Model Kit

€9.49

The Italeri 1:35 Observation Post model kit brings vertical structure and field detail into a scale scene with an elevated lookout design, a ladder, an upper platform and a roofed top section. As an assembly kit, it focuses on the build itself, with unassembled parts arranged on sprues and a finished form that reads clearly as a raised post for dioramas and display settings. The 1:35 scale makes the Observation Post easy to combine with military vehicles, figures and terrain elements in the same proportion. Cross-braced side frames define the support structure, while horizontal beams connect the main body and create the base for the upper level. Wood-textured panels shape the enclosed section and give painted finishes more depth across planks, edges and weathered effects. The roof panel sits above slim supports, adding another distinct layer to the silhouette and helping the structure stand out in open layouts. With 600 minutes of assembly time, this kit suits model builders who want a focused construction project rather than a quick accessory add-on. The finished tower can anchor a checkpoint scene, overlook a camp perimeter or add height variation beside vehicles, figures and ground cover. On a shelf or in a diorama, the ladder access, raised stance and sheltered top platform create a clear visual focal point within a 1:35 setting.

Model tanks

Italeri 1:35 WWII US Off-Road Support Vehicle

€15.99

Italeri 1:35 WWII US Off-Road Support Vehicle brings a classic light military vehicle into a compact scale build with a finished model length of 14 cm. The assembly kit combines the jeep with a trailer, creating a small convoy-style subject that carries the look of wartime transport and support equipment in one display piece. The 1:35 scale gives the body, wheels, trailer structure, and exterior fittings enough presence for careful painting and weathering work. The kit is designed for assembly and lists a build time of 600 minutes, making it suited to a longer bench session with steady progress across chassis, body sections, and smaller details. Decals for 1 version are included for the finishing stage, adding the markings that complete the chosen scheme. The source material behind the vehicle reflects the wartime development of a light multi-purpose 4x4 and the broad service history that made this type one of the most widely produced military light vehicles of the period. On a shelf, in a cabinet, or as part of a 1:35 diorama, the combination of vehicle and trailer creates a focused historical scene with more visual depth than a standalone jeep. The compact footprint also leaves room to place terrain, figures, or other period accessories around the completed build. Minimum age: 14 years

Military aeroplane models

Italeri 1:48 HURRICANE Mk.I Plastic Kit

€41.99

The Italeri 1:48 HURRICANE Mk.I is a detailed plastic kit built around one of the Royal Air Force's defining fighters from the opening phase of World War II. At 20.5 cm long, the finished aircraft brings the compact proportions of the Hawker Hurricane into a scale format that suits both focused bench work and display once complete. The subject reflects the Hurricane Mk.I configuration with a Rolls-Royce Merlin 12-cylinder liquid-cooled engine rated at more than 1,000 HP and an armament layout of eight 7.7 mm Browning machine guns. In service, this fighter exceeded 500 km/h and played a major role during the Battle of Britain alongside the Spitfire. The kit also comes with super decals for 4 versions, opening different marking paths for the same airframe and giving the finishing stage a stronger historical angle. A color instruction sheet supports paint placement and decal application with visual guidance across the build. On the workbench, the 1:48 scale gives enough room to develop paintwork, markings, and small details without demanding the footprint of a larger aircraft model. Once assembled, the Hurricane's wing shape, cockpit area, and wartime profile make it a natural centrepiece for a World War II aircraft lineup, whether displayed on its own or alongside other RAF subjects.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri 1:48 US F-22A Raptor model kit

€34.99

Italeri 1:48 US F-22A Raptor captures the distinctive form of the Lockheed Martin-Boeing stealth fighter in a detailed plastic model build. The sharply angled surfaces, twin vertical stabilizers and compact fuselage layout give the finished aircraft the unmistakable silhouette of a 5th generation USAF jet, creating a striking presence on the workbench and in a display cabinet. The full-size F-22 is powered by 2 Pratt & Whitney F119 turbofan engines with afterburners and vector thrust through the exhaust nozzles, and this kit draws on that advanced aircraft design for its overall shape and technical character. The original aircraft combines aerodynamic profiling with high-tech materials to reduce radar detectability, while the intake and exhaust design also supports lower heat and noise signatures. Internal loading bays for air-to-air and air-to-surface armament are another defining feature of the aircraft concept, and the advanced avionics are built for long-range target detection, tracking and acquisition. In the model, these design cues translate into a build centered on modern combat-aircraft geometry rather than exposed external stores. With an assembly time of 600 minutes, the kit offers a substantial project for model builders aged 14 years and up. The included assembly kit is supported by a decals sheet for 3 marking versions, adding unit insignia, serials, rescue markings and weapons stencils that sharpen the final finish. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Model tanks

Italeri 1:56 US M4 Sherman 75 mm Model Kit

€21.99

The Italeri 1:56 US M4 Sherman 75 mm model kit brings one of the most widely used American medium tanks of the Second World War into a compact 10.2 cm format. This 43-part assembly kit captures the early Sherman M4A1 configuration with its rounded hull, cast turret and 75 mm gun, giving the finished tank the distinctive profile seen on wartime vehicles from 1942. The build centers on core armored vehicle elements such as the upper and lower hull, turret assembly, running gear and track sections. Instruction imagery shows hatch position options and turret installation into the circular hull opening, adding mechanical interest during construction. Decals for 2 versions allow the finished model to be completed with U.S. Army markings or an alternative Russian Army WWII scheme. The included assembly kit is intended for model builders aged 14 years and over. On the workbench, the 1:56 scale keeps the project manageable while still leaving room for painted details across the hull, turret and tracks. Once completed, the Sherman sits well in military model displays, diorama scenes or focused World War II collections, where the compact footprint and recognizable silhouette make it easy to place alongside other armored vehicles. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Model figures

Italeri 1:72 100 Years War British Warriors

€10.99

Italeri 1:72 100 Years War - British Warriors brings a key medieval force into miniature form with an assembly kit centred on the British side at Agincourt. The 1:72 scale gives the set a compact footprint for display shelves, historical layouts and battle dioramas while still leaving room for visible armour, weapons, shields and horse tack once the parts are finished. The subject draws on the battle of 25 October, when Henry V's army faced the forces of Charles d'Albret, and the set reflects that mix of foot troops and noble mounted fighters. Archers, infantry figures, rider poses, horses and a banner create a broader battlefield composition than a single troop type alone. The longbow is a defining element of the historical theme, linking the figures directly to the English tactic described in the source material. Unpainted components arrive on sprues and are intended for clipping, assembly and painting as part of the modelling process. Assembly is required and takes 600 minutes. Once completed, the figures can be arranged into defensive lines, marching groups or cavalry-supported scenes with sharpened stakes, shields and heraldic details added through finishing work. The set suits medieval collections, wargame-style table scenes and diorama builds that focus on the 100 Years War. Age 14+

Military figures & accessories

Italeri 1:72 2nd WW German Paratroopers Kit

€10.99

Italeri 1:72 2nd WW German Paratroopers is an assembly kit built around 50 scale figures for World War II scene building. The 1:72 format gives dioramas, battlefield layouts, and historical displays a compact troop presence, while the unpainted parts leave room for individual finishing choices across uniforms, equipment, and weapons. The set draws on the history of German Fallschirmjager, whose operations included the conquest of Crete during Operation Merkur in May 1941 and the fighting at Montecassino in March 1944 under General Kurt Student's 1st Division Fallschirmjager. That background gives the figures a defined military setting for recreating airborne actions, elite infantry positions, or defensive scenes among damaged buildings and rubble. The assembly time is stated as 600 minutes, so the build can be approached as a longer modelling project with separate stages for removing parts from the sprues, preparing joins, and painting the finished figures. Placed across fortifications, ruined monasteries, or urban combat layouts, the 50-figure count helps larger 1:72 scenes feel populated rather than sparse. The mix of poses supports movement, cover, and firing positions, which adds rhythm and direction to historical displays on shelves, in cabinets, or as part of a wider military collection.

Military aeroplane models

Italeri 1:72 F-22 Raptor Aircraft Model Kit

€19.99

The Italeri 1:72 F-22 Raptor assembly kit captures the angular form of the U.S. Air Force air superiority fighter in a compact aircraft model with a finished length of 24 cm. Its stealth-style layout, swept surfaces and twin tail fins give the build a crisp modern profile that stands out during assembly and once placed on display. The subject is presented as a 1:72 scale model, a format that brings the aircraft's proportions into a manageable size for bench work while still leaving room for surface finishing and markings. The F-22 design is described with internal weapons carriage inside the fuselage, a detail tied to reduced radar detection and cleaner aerodynamic lines. Source information for the aircraft also points to advanced engine technology that enables supersonic speed without afterburners, along with sophisticated electronic equipment for weapons control, giving the finished build a strong connection to the real aircraft's role and engineering. With assembly required and a stated build time of 600 minutes, this kit suits focused sessions of cutting, fitting, painting and applying the included decal sheet for 1 version. On the bench, the compact 24 cm size keeps the project easy to handle, while the finished aircraft shape gives shelves, desks and display cabinets a clear modern aviation focal point.  Warning! Not suitable for children under 14 years.

Model figures

Italeri 1:72 French Heavy Cavalry Model Kit

€10.99

Italeri 1:72 French Heavy Cavalry brings Napoleonic mounted troops into a compact model kit that combines historical subject matter with hands-on building. The set builds 17 horsemen, creating the look of a heavy cavalry formation with riders, horses and battlefield movement captured at 1:72 scale. The subject draws on the French heavy cavalry arm in which carabiners served alongside cuirassiers, troops known for their shining cuirasses and imposing battlefield presence. Mounted poses with sabres, lances and a trumpet figure give the formation visual variety while keeping the unit coherent for display. The unassembled parts are arranged on sprues, which helps separate preparation, painting and final fitting into clear stages across the build. Assembly is required, and the stated build time is 600 minutes. The kit is marked 14 Years, matching its scale-model focus and detailed construction format. On a shelf, in a historical diorama or as part of a larger Napoleonic scene, the completed cavalry unit adds motion and structure to the setting. The troop formation works well beside infantry, artillery and terrain pieces, whether the aim is a Borodino-inspired reserve line or a Waterloo-era charge composition.

Military figures & accessories

Italeri 1:72 German Infantry Figure Set

€10.99

Italeri 1:72 German Infantry brings a full formation of 50 figures into World War II model scenes, with feldgrau uniforms and period infantry equipment that give the set a clear historical identity on the workbench and in the finished display. The 1:72 scale fits naturally into compact battlefield layouts, convoy scenes, and wider diorama compositions where troop density matters. The figures are supplied as an assembly kit and require about 600 minutes for assembly, making this set suited to builders who want a substantial figure project rather than a quick single-session task. The subject represents Wehrmacht infantry units used on European and North African fronts from 1939 to 1945, which opens up a broad range of historically grounded scene planning. Different poses visible on the sprues support marching, advancing, kneeling, aiming, and support-position arrangements. Uniform gear shown across the figures includes combat loadout details such as pouches, packs, and helmets that add depth once painted. Mauser K-98 rifles and MP40 submachine guns give the set recognizable small arms for period-specific staging. The figures can be arranged around vehicles, buildings, terrain sections, or defensive positions to create movement, scale, and narrative across a military display. Age marking: 14 Years.

Military aeroplane models

Italeri 1:72 Ju-52/3m Aircraft Model Kit

€34.99

Italeri 1:72 Ju-52/3m is a detailed aircraft model kit built around one of the most recognizable transport aircraft designs of the 1930s and 1940s. The tri-motor configuration, broad wing layout, and corrugated metal fuselage panels give the finished model a strong period character, whether placed in a collection cabinet or worked into a historical diorama. The assembly kit uses plastic parts and clear molded sections for the glazed areas, with the build progressing through fuselage, wing, tail, and upper detail stages shown across the instruction sequence. Version-specific parts support different historical finishes, and the decal guide covers 3 schemes: a Luftwaffe medical evacuation aircraft from fall 1939, a KG 500 aircraft from the Stalingrad pocket airlift in winter 1942/43, and a transport used during Unternehmen MERKUR on Crete on 20 May 1941. The box data also states that 6 figures are included, adding extra context for display scenes around the completed aircraft. With 1:72 scale proportions, the model suits shelves, aviation collections, and compact diorama layouts while still leaving room for camouflage work, insignia placement, and weathering detail. Assembly is required, with a stated assembly time of 600 minutes, and the age marking is 14 Years. Paints, cement, and tools are required separately.  Warning! Not suitable for children under 14 years.

Model figures

Italeri 1:72 Napoleonic Wars French Infantry

€11.99

Italeri 1:72 Napoleonic Wars - French Infantry brings a full historical troop set into miniature form with 48 figures designed for assembly. The 1:72 scale gives enough presence for battlefield layouts while keeping the footprint compact for shelf displays, campaign scenes or wargaming tables. The set draws on French line infantry from the Napoleonic Wars, a formation style defined by close-order advance and support from light units. The source theme names Chasseur, Tirailleurs and Voltigers as part of that wider battlefield context, opening the door to scenes that show pressure on enemy lines, command disruption and shifting formations. On the sprues, the figures appear in a range of action poses including marching, aiming, kneeling and advancing, with a drummer and a standard bearer adding command and signal detail to the group. The unpainted parts leave room for regiment colours, weathering and basing choices to shape a specific campaign look. Assembly is required, and the stated assembly time is 600 minutes. Once built, the figures suit dioramas, historical displays and tabletop battle setups where ranked infantry, skirmish elements and command figures need to read clearly at a glance.

Military aeroplane models

Italeri 1:72 US P-51A Mustang Model Kit

€16.99

The Italeri 1:72 US P-51A Mustang model kit brings one of the best-known piston engine fighters of World War II into a compact aircraft build with strong historical character. This assembly kit focuses on the early P-51A variant, the version that entered service in 1942 with the Allison V-1710 engine and a top speed of 650 km/h, giving the finished model a clear place in the Mustang story. The subject itself adds depth to the build. The real aircraft carried 4 wing-fitted 12.7 mm Browning machine guns and could be equipped with 2 underwing fuel tanks for extended range, details that shape the look and role of the model. The kit also opens up 6 finishing versions, spanning U.S. Air Force and RAF service, including the Mustang Mk.II designation. Decal choices cover serial numbers, national insignia, squadron markings, invasion stripes and nose art, so each scheme can take on a distinct wartime identity. At 1:72 scale, the model fits easily into a display cabinet, on a shelf or into a wider World War II aviation lineup. The 600-minute assembly time gives space for careful work on the cockpit, airframe and final paint finish, whether the goal is a clean historical presentation or a more weathered combat look. Recommended age: 14+  Warning! Not suitable for children under 14 years.

Military figures & accessories

Italeri 1:72 WW2 British Infantry Figure Set

€10.99

Italeri 1:72 WW2 British Infantry brings a D-Day themed figure set into a compact scale that suits detailed military scenes and historically focused collections. The set contains 42 figures and centres on British Expeditionary Force troops linked in the source material to the Normandy landings at Sword, Juno, and Gold, giving the build a defined World War II setting rather than a generic infantry theme. The figures arrive as an assembly kit on sprues, so the build involves removing the parts, assembling the miniatures, and preparing them for painting and placement. An assembly time of 600 minutes points to a substantial hobby project with room for careful finishing across the full group. The 1:72 scale works well for combining infantry with vehicles, terrain pieces, and beach assault layouts from the same period. Different body positions visible across the set help create movement in a scene, with figures posed for advancing, kneeling, aiming, and supporting battlefield actions. On a shelf, in a cabinet, or across a larger diorama base, the 42-figure count gives enough material to shape a landing sequence, defensive line, or marching formation with more visual variation. The historical framing around Caen and the Normandy beaches also supports period-specific painting choices and display planning for collectors and model builders aged 14 years and up.

Military figures & accessories

Italeri 1:72 WW2 German Elite Troops Model Kit

€13.99

Italeri 1:72 WW2 - German Elite Troops (SS) is an assembly kit built around a specific late-war setting, placing 48 figures into the Ardennes offensive in Belgium on 16 December 1944. The 1:72 scale suits compact battle layouts while still leaving room to stage infantry movement, firing lines, and support positions across a diorama base. The historical reference in the kit points to the Wacht am Rhein offensive under General Von Rundstedt and to the siege of Bastogne on 21 December 1944, where the 101st Airborne Division defended the town. That context gives the set a clear place within Western Front collections rather than a generic infantry role. Uniform and equipment details support that focused theme, and the figure group is shaped for varied scene building instead of a repeated row of matching poses. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the set supports painting, basing, and terrain work for winter combat scenes, fortified positions, and small-scale historical displays. Once assembled, the figures can be arranged as a concentrated combat unit, spread through woodland cover, or combined with vehicles and structures in 1:72 scale collections.

Military aeroplane models

Italeri A-10 Gulf War Aircraft Model Kit 1:72

€22.99

Italeri A-10 Gulf War brings the unmistakable lines of the A-10 Thunderbolt II into a 1:72 scale aircraft model kit with a finished length of 22.6 cm. The twin-engine ground-attack aircraft layout, straight wing planform and compact display size give the completed build a strong presence on a shelf, desk or in a wider military aviation collection. The subject draws on the A-10 developed by Fairchild Republic for close air support missions, with the type's heavily armoured design, 30 mm GAU-8/A Avenger cannon and broad external stores capacity forming the historical basis of the model. Eleven underwing and under-fuselage pylons defined the real aircraft's offensive load potential, and that combat-focused configuration shapes the character of this kit. The included super decals sheet covers 4 versions, with marking choices spanning Gulf War-era A-10A aircraft and later A-10C schemes shown in the reference material. Assembly is required, and the stated build time is 600 minutes. That combination of scale, subject and marking choice suits builders who enjoy military aircraft with a clear operational identity. During painting and finishing, the 4-version decal selection opens different visual directions, from desert-war context to later service appearances, while the 22.6 cm format keeps the completed aircraft easy to place in a cabinet or alongside other 1:72 aviation builds.

Military aeroplane models

Italeri A-20B / Boston III Aircraft Model Kit 1:48

€45.99

The Italeri A-20B / Boston III assembly kit captures the lines of the twin-engine Douglas aircraft in 1:48 scale, combining a glazed bomber nose, tricycle landing gear layout and period camouflage options in one detailed aircraft build. Fine exterior molding and transparent sections give the fuselage, cockpit and nose area the layered look that defines this WWII design. The kit is built around multiple sprues with dedicated clear parts, separate tail components, engine nacelles, propellers, landing gear elements and external stores. Version-specific parts support several historical finishes, and the decal sheet covers 5 liveries including RAF, Free French and USAAF aircraft. The instructions also call for 30 g of nose weight to support the model's stance after assembly. Bomb bay configuration can be handled in different ways, with an open or closed layout shown in the build sequence, and the underside can also carry the optional long range tank. Figures are not included. On the bench, the 600 minute assembly time leaves room for careful trimming, painting and decal placement across the framed canopy, engine fronts and wing surfaces. Once completed, the 1:48 scale format gives the Boston III / A-20B enough presence for a display shelf while still leaving space to appreciate details such as squadron markings, invasion stripes or the Lady Jean nose art from the included options.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri A-26B Invader Aircraft Kit 1:72

€36.99

The Italeri A-26B Invader in 1:72 scale brings the lines of Douglas' twin-engine attack aircraft into a compact model kit with a strong historical identity. This detailed aircraft build focuses on the B variant, the most widely produced version of the Invader, known for its heavily armed closed nose and its long operational career across several major conflicts. The original aircraft entered frontline service in 1944 and remained in use well beyond World War II, appearing later in the Korean, Indochina and Vietnam wars. That long service life gives the A-26B Invader a broad historical context that stands out in a collection of military aircraft. The source aircraft was powered by 2 Pratt & Whitney R-2800 Double Wasp radial engines, each rated at 2000 horsepower. At full operational load, the Invader could reach 570 km/h, a figure that underlines the performance behind its purposeful airframe. Marking options add another layer of detail to the finished model, with a super decal sheet for 4 versions included in this new decals edition. The 1:72 scale keeps the aircraft manageable on the workbench and easy to place in a display cabinet alongside other aviation subjects. Recommended age: 14 years.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri A-4E/F/G Skyhawk Aircraft Model Kit 1:48

€35.99

The Italeri A-4E/F/G Skyhawk in 1:48 scale recreates one of the best-known light attack aircraft of the 1950s in a format that suits detailed bench building and display. Its compact Douglas airframe, low-mounted delta wing configuration and side-mounted air intakes give the finished model the lean, agile look that made the original Skyhawk a familiar sight on aircraft carriers. This assembly kit covers A-4E, A-4F and A-4G versions and draws on service histories that reached beyond the United States to operators including Australia, New Zealand, Kuwait and Israel. The real aircraft used a single Pratt & Whitney J52 turbojet engine and carried 2 20 mm guns, with hard points under the wings and fuselage for missiles, rockets and bombs; those operational traits shape the character of the model and its external stores. Paint and marking references in the set show multiple liveries, including naval and air force schemes with unit insignia, serials and warning stencils. Kit, instructions and decor are included. With a stated assembly time of 600 minutes, the build lends itself to steady work sessions focused on airframe alignment, surface finishing and decal application. On a shelf, desk or in a larger aviation collection, the completed Skyhawk brings carrier-era jet history into a clear 1:48 display presence.

Military aeroplane models

Italeri A-6E TRAM Intruder Aircraft Model Kit 1:72

€27.99

Italeri A-6E TRAM Intruder captures the look of the U.S. Navy attack aircraft in 1:72 scale, translating the broad fuselage, side-by-side cockpit layout and carrier-based profile into a 23 cm display build. The subject represents the A-6E TRAM version, the variant fitted with the laser target designation system that defined the later Intruder's all-weather strike role. The assembly kit uses molded parts on multiple sprues and includes a clear sprue for canopy elements, plus a super decals sheet for 2 marking options. The airframe can be finished as a U.S. Marines aircraft from Shaikh Isa Air Base, Bahrain, 1992 or as a U.S. Navy aircraft from USS America, 1976. Instruction diagrams also indicate 20 g of ballast in the nose during assembly, a practical detail that helps the completed aircraft sit correctly on its landing gear. Underwing pylons, tanks and weapon stores add configuration depth, while the decal sheet extends the finish with walkway markings, serials, insignia, cockpit instruments and weapon stencils. With an assembly time stated as 600 minutes, the build suits a slower, step-by-step approach at the workbench. The finished model works equally well as a Gulf War themed display aircraft, a U.S. naval aviation subject, or a painting project focused on camouflage, panel detail and squadron markings.

Military aeroplane models

Italeri A-7E Corsair II Model Kit 1:48 Scale

€39.99

The Italeri 1:48 A-7E Corsair II model kit captures the distinctive lines of the U.S. Navy light attack aircraft in a 29.0 cm format that gives the finished build a strong shelf presence. Built from ESCI moulds, the assembly kit focuses on the final A-7E version, known for its carrier-based role, its large frontal air intake under the cockpit and its 35° swept wing with foldable outer sections on the full-size aircraft. The subject matter adds historical depth as well as visual character. The real A-7E was developed to replace the Douglas A-4 Skyhawk and A-1 Skyraider, and its operational configuration expanded to carry conventional bombs, guided Paveway bombs and air-to-surface missiles. On the full-size aircraft, a Head-up-Display formed part of the updated combat equipment, while underwing hardpoints defined its attack role. The included super decals sheet opens 4 finishing versions, with markings shown for U.S. Navy squadrons including VA-72 Blue Hawks, VA-22 Fighting Redcocks and VA-83 Rampagers. With a stated assembly time of 600 minutes, the build suits modelmakers who enjoy a project with room for careful painting and decal work. The 1:48 scale gives enough surface area for squadron markings, service stencils and camouflage contrasts to stand out across wings, fuselage and tail. Paints, tools and cement are required separately.

Military aeroplane models

Italeri A-7E Corsair II Model Kit 1:72 Scale

€22.99

Italeri A-7E Corsair II brings a classic U.S. Navy light attack aircraft into 1:72 scale with a finished length of 195 mm and the compact proportions that suit shelf display, cabinet presentation or a focused aircraft lineup. The assembly kit captures the A-7E, the final U.S. Navy production version of the Corsair II, with the broad intake under the cockpit and the swept wing layout that defined the aircraft on carrier decks. The original aircraft was developed in the first half of the 1960s to answer a U.S. Navy requirement for a new carrier-capable light attack aircraft, replacing the Douglas A-4 Skyhawk and the piston-powered Douglas A-1 Skyraider. It was derived from the Vought F-8 Crusade airframe and combined a 35° foldable swept wing with underwing hardpoints for conventional bombs, guided bombs such as Paveway, and air-to-surface missiles. On the A-7E version, improved operational capability also included compatibility with Harpoon anti-ship missiles and AGM-88 HARM anti-radiation missiles. The color instruction sheet supports the painting stage, while the decal sheet covers 4 versions with squadron and stencil detail. The 600-minute assembly time suits a build approached in stages, from cockpit and fuselage work to wing assembly and final markings. Once completed, the model fits naturally into Cold War naval aviation collections, U.S. Navy aircraft displays, or dioramas centered on carrier air wing subjects.

Military helicopters

Italeri AB 212/UH-1N Helicopter Model Kit 1:48

€25.99

Italeri AB 212/UH-1N is a 1:48 assembly kit that recreates a medium utility helicopter with a finished model length of 36 cm. The subject traces back to the twin-turbine UH-1N family developed by Bell Helicopter at the end of the 1960s, while the AB-212 designation identifies the licensed Italian-built version produced by Agusta Westland. The airframe is defined by a 2-blade rotor and a fuselage extended beyond model 205, giving this helicopter its distinctive profile. Power in the full-size aircraft comes from 2 Pratt & Whitney PT6T turboshaft turbines rated at 1.342 kW, a technical detail that helps place the type within the utility and military transport class. The kit also draws on the later operational update applied in the first half of the 2000s, when the AB 212 received equipment to expand mission capability. That configuration introduced 2 swivelling 7.62 mm machine guns on the tailgates, antimissile flare launchers, and additional ceramic and kevlar armour for crew protection. These details connect the build to real service use, including Italian AB 212 helicopters employed in Afghanistan from 2006 within the International Security Assistance Force mission. On the bench, that background gives extra meaning to the painting and decal stages, whether the focus is historical context, technical shape, or military aviation display. Paints are required separately.  Warning! Not suitable for children under 14 years.

Military figures & accessories

Italeri Accessories model kit 1:35 scale set

€9.49

Italeri 1:35 Accessories is a model kit built to add field equipment and combat detail to military dioramas. The set combines miniature weapons, storage pieces and personal gear in one scale, so vehicle displays, infantry positions and terrain sections can be arranged with more visual structure and period character. Among the included parts are an 81 mm mortar with ammunition boxes, Browning M1919 A4 machine guns, BREN Mk. II guns, Thompson M1928 A1 submachine guns, Sten Mk. II guns, Garand M1 rifles, Lee-Enfield Mk. I rifles, Winchester M1 rifles and a 60.3 mm bazooka. The set also adds helmets, grenades, binoculars, pouches, sacks, satchels, a jerry can and several wooden and metal crates. This mix supports different scene layouts, from a dug-in firing point to a supply area beside a parked vehicle. Because the parts are all scaled to 1:35, they can be distributed across terrain, figures and vehicle surroundings without breaking the visual proportion of the build. The 600-minute assembly time points to a project with room for careful preparation, painting and placement. On a shelf, the accessories can frame a tank, truck or artillery piece with extra context. On a diorama base, the same parts can mark out ammunition storage, infantry equipment drops or a support weapon position, giving the finished scene more depth than a vehicle-only display.

Model paints

Italeri Acrylic Paint Flat Dark Earth 20 ml

€3.69

Italeri Acrylic Paint Flat Dark Earth 20 ml brings a muted matte tone to model finishing work, giving builders a focused colour choice for surfaces that call for an earthy, non-gloss appearance. The 20 ml bottle size suits careful paint use across detail stages, touch-ups and broader colour blocking on an assembly kit. The acrylic paint format supports measured application, which helps when working around panel lines, edges and smaller shaped sections. Flat Dark Earth fits naturally into military subjects, terrain sections and weathered scene elements where a subdued brown tone is needed. The matte character keeps the finish visually restrained rather than reflective, which can help painted sections sit more convincingly alongside dust effects, field equipment tones or ground textures. With assembly required and a stated assembly time of 600 minutes, the paint aligns well with longer model projects that move through construction, surface preparation and final colour work. During bench sessions, the 20 ml volume is practical for repeated use across separate stages instead of a single pass. The 14 Years marking is stated in the product data, making the listed age information clear while the colour itself supports steady, detail-led finishing on scale builds.

Model paints

Italeri AcrylicPaint Flat Ex.dr.SeaGrey 20ml

€3.69

Italeri AcrylicPaint Flat Ex.dr.SeaGrey 20ml brings a specific finishing colour into model work with a 20 ml paint volume and a flat Ex.dr.SeaGrey shade. The defined colour name supports matching across a build where a muted surface tone is needed on selected sections, touch-ups, or broader painted areas. This entry sits in Models & Accessories under Models Supplies, which places it clearly within a model-making context rather than general craft use. The data states assembly is required and gives an assembly time of 600 minutes, pointing to longer-form projects where painting is one stage within a more extensive construction process. The included component is listed as an assembly kit. Minimum age is stated as 14 Years. Together, these details frame the paint around structured hobby builds that call for controlled application and a planned finishing stage. On the bench, the 20 ml size is easy to place alongside other modelling supplies while keeping the selected Flat Ex.dr.SeaGrey tone ready for repeat use across the same project. It also fits builds where colour consistency matters between separate sessions, whether the work focuses on detail correction, section painting, or the final visual balance of the assembled model.

Model paints

Italeri AcrylicPaint Flat Intense Blue 20 ml

€3.69

Italeri AcrylicPaint Flat Intense Blue 20 ml brings a clearly specified paint format and colour designation into model-building supplies. The supplied data names AcrylicPaint as the medium, Flat Intense Blue as the shade, and 20 ml as the stated volume, giving a concise reference point when selecting paint for finishing work. The colour wording in the source data points to a flat blue tone with an intense character, which helps separate this entry from gloss, metallic, or effect-based finishes in a paint collection. The 20 ml size supports measured use across detail sections, smaller painted areas, and follow-up touch-up work where a full-size container may be unnecessary. Assembly is marked as required in the data, with 600 minutes listed as assembly time, and the included components field states assembly kit. The age marking is given as 14 Years. Within a bench setup for model painting, colour sorting, or supply planning, the exact combination of AcrylicPaint, Flat Intense Blue, and 20 ml keeps selection straightforward. It suits cataloguing alongside other model supplies where paint type, shade name, and container volume need to be identified quickly and consistently.

Model paints

Italeri AcrylicPaint Flat Ital. Interior Green

€3.69

Italeri AcrylicPaint Flat Ital.Interior Green brings a specific flat interior shade into model finishing work, giving compatible builds a muted green tone suited to cockpit, cabin or other internal painted areas. The colour name in the product data points to interior use, so it fits projects where a non-gloss surface helps painted sections read with a more scale-appropriate look. This entry sits in the Models Supplies range and is listed as an assembly kit accessory rather than a standalone toy, placing it within a build process that includes surface preparation, painting and final detailing. The stated assembly requirement and assembly time of 600 minutes indicate a longer-form hobby project context rather than quick application alone. Batteries are not included in the product data. The minimum age is 14 Years, matching the focused handling and finishing work typically involved in scale model painting. Used during interior painting stages, this AcrylicPaint can be applied where a build calls for a dedicated Ital.Interior Green shade instead of a general-purpose green. It suits model sessions that move from construction into colour finishing, especially when interior areas need their own distinct tone separate from the outer bodywork.  Warning! Not suitable for children under 14 years.

Model helicopters

Italeri AH-1W Super Cobra Model Kit 1:72

€14.49

The Italeri AH-1W Super Cobra model kit in 1:72 scale brings a well-known Bell Helicopter attack helicopter to the bench with the lean fuselage, tandem cockpit layout and mission-focused profile that defined this aircraft in service from the 1980s onward. As an evolution of the Cobra, the AH-1W combined compact attack-helicopter proportions with a layout built around a 2-person crew, placing the pilot and weapons operator in tandem to support visibility during combat operations. In full scale, the AH-1W used 2 General Electric turboshaft engines and could exceed 280 km/h, details that help explain the aircraft's fast-response battlefield role. The type served in several operational theaters, including the Gulf and Iraq, and was used by the United States Marine Corps in support of ground troops during amphibious assault operations. Its weapons fit could include TOW anti-tank missiles, AGM-114 Hellfire guided missiles and unguided rockets, giving the subject a distinctly armed late-20th-century configuration. On a shelf or within a modern military diorama, the AH-1W Super Cobra stands out through its narrow body, stepped crew arrangement and attack loadout. The 1:72 scale keeps the build manageable while still leaving room for the aircraft's defining shapes and equipment to read clearly in the finished model.  Warning! Not suitable for children under 14 years.

Model car kit

Italeri Alfa Romeo Guilia 1600 Spider 1:24 Kit

€37.99

The Italeri Alfa Romeo Guilia 1600 Spider 1:24 kit turns a celebrated Italian roadster into a detailed scale build with the long, low lines of the original open-top car clearly carried into the finished model. Based on the Giulia Spider produced from 1962 to 1965, this assembly kit focuses on the shape changes that distinguished it from the earlier Giulietta, including the revised front hood linked to the 1,570 cc inline 4-cylinder engine. The full-size car used a synchronized 5-speed gearbox, and the model reflects that period specification through its carefully detailed cockpit and exterior layout. Interior elements such as the seats, steering wheel and instrumentation help recreate the updated cabin, while separate body components, front lighting parts, grille details and chrome-look trim areas give the build more definition as each stage comes together. The decal sheet extends that finish with badges, wheel markings and alternative European registration plates for Italy, France, Germany, the Netherlands and Spain. With a stated assembly time of 600 minutes, the kit suits a measured build pace centered on painting, fitting and final detailing. On the bench, the 1:24 scale gives enough presence for trim accents and body contours to stand out, whether the completed Spider is placed in a display cabinet or alongside other classic automotive subjects. The assembly kit is intended for ages 14 years and over.  Warning! Not suitable for children under 14 years.

Model trucks

Italeri American Superliner Truck Model Kit 1:24

€62.99

The 1:24 American Superliner from Italeri captures the look of a classic U.S. long-haul tractor with a stretched hood, a large sleeper section and the visual weight that defines this truck category. At 35.22 cm long, the finished model brings that road-going presence onto the workbench and into the display cabinet, with the Lady Butterfly livery adding a custom show-truck character across the cab and hood. The build centers on a multi-part truck structure rather than a simple outer shell. Instruction stages show a ladder-style frame, axle modules, underbody tanks, radiator and engine-area components, followed by a separate cab interior with seats, dashboard and steering wheel. Clear glazing parts close the cab, while mirrors, roof details, bumper elements and a front guard complete the exterior. Decal placement guides cover the portrait artwork, butterfly motifs, script markings and license plate details, so the finished truck carries the same bold identity shown in the kit artwork. This assembly kit suits model builders who enjoy vehicle subjects with visible mechanical content as well as custom graphics. Assembly takes about 600 minutes. Paints, cement and tools are required separately. Once completed, the American Superliner fits naturally into truck model collections, workshop display shelves or themed dioramas built around highway transport.

Military aeroplane models

Italeri AMX-T Twin Seater Model Kit 1:72

€29.99

The Italeri 1:72 AMX-T Twin Seater brings the lines of the Italian and Brazilian AMX programme into a detailed aircraft build with a two-seat cockpit layout, swept wings and the compact proportions of the original ground attack jet. As a plastic assembly kit, it focuses on the shape, markings and finishing work that give this aircraft its distinct presence on the shelf. The subject is the AMX-T, the twin-seat version developed as an advanced training aircraft with the ability to serve in ground attack and close support roles. The real aircraft used a Rolls-Royce Spey 807 engine, reached a maximum speed of 1,000 km/h and, in Italian service, carried a 20 mm M61 cannon with an offensive payload of 3,800 kg. Those background details give the finished model a clear operational identity. New parts in this release are joined by photo-etched parts for finer detail, and the super decals sheet covers 4 versions with Aeronautica Militare markings. Figures are not included. The different marking options open up several display directions, from the TA-11 MM55037 of 132° Gruppo, 3° Stormo at Kleine-Brogel AB in 1998 to MM55051 of 101° Gruppo O.C.U. 32° Stormo at Amendola AB in June 2006 and ACOL MM55049 of 132° Gruppo, 51° Stormo at Istrana AB in February 2020. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately.

Military figures & accessories

Italeri Antitank Obstacles Model Kit 1:72

€9.49

Italeri Antitank Obstacles is a 1:72 assembly kit created for static military dioramas, with 61 parts that build a varied group of defensive barriers for detailed scene composition. The set focuses on obstacle elements rather than vehicles or figures, making it a useful addition when a layout needs roadblocks, perimeter markers or fortified ground sections that read clearly at small scale. The parts assortment supports several obstacle shapes, including block forms, pyramid-style barriers and frame constructions associated with battlefield defences. That mix helps break up flat terrain and gives a scene more structure across roads, open ground or checkpoint areas. Because the kit is static, placement can be planned precisely around armour, infantry positions or damaged terrain already present in a 1:72 display. Assembly time is stated as 600 minutes, which suits a slower build with room for cleanup, painting and weathering between stages. On a shelf, in a display case or as part of a larger historical layout, the finished barriers add clear visual reference points that guide how the scene is read. Rows of obstacles can mark restricted access, shape the edge of a defended zone or create stronger depth in compact diorama footprints. Age 14 Years+

Military figures & accessories

Italeri AS.51 HORSA Mk.I/II 1:72 Glider Kit

€31.49

Italeri AS.51 HORSA Mk.I/II & Brit. Paratr. brings a key Allied airborne aircraft into 1:72 scale with a finished length of 28.4 cm. The long-fuselage glider format gives the model a distinctive silhouette on the bench and in a display lineup, while the D-Day Series framing connects it directly to Normandy 1944 and the wider story of airborne operations. The subject represents the well-known British Horsa, a transport glider used to carry more than 25 troops or substantial war material and supplies. Its service history links it to the main airborne landings of World War Two, with especially strong ties to Normandy and the Arnhem bridge operation in the Netherlands. The set combines the aircraft with British paratrooper figures, so the finished scene can show the glider at rest after landing rather than as a standalone airframe. Decals are provided for 1 version, and the source material also references Operation Tonga and Pegasus Bridge markings for historically specific finishing. This assembly kit suits model builders who enjoy military aviation subjects with a clear operational setting. On a shelf, in a diorama, or as part of a D-Day collection, the Horsa and paratrooper combination creates a focused World War Two display with aircraft scale, troop context and campaign identity working together.

Military aeroplane models

Italeri AS332 Super Puma Model Kit 1:72 Scale

€24.99

The Italeri AS332 Super Puma model kit in 1:72 scale brings a widely used medium twin-engine helicopter to the workbench with a detailed build centered on a recognizable 4-blade rotor layout and the aircraft's clean, purposeful lines. The AS332 Super Puma was designed by Aerospatiale, now Airbus Helicopters, and the finished model captures the form of a helicopter developed for demanding military and civilian missions. On the full-size aircraft, 2 Turbomeca engines support a cruising speed of 260 km/h, while retractable landing gear improves aerodynamics during flight. That technical background gives the build a strong real-world foundation and makes the subject especially appealing for collections focused on utility aircraft, transport helicopters, and modern rotary-wing aviation. The AS332 Super Puma also stands out for a range of 800 km and for continuous upgrades to avionics and electronic navigation support systems across its service life. Set on a shelf, in a display cabinet, or alongside other 1:72 aircraft, the completed helicopter adds a clear operational character drawn from a machine built for long-range missions. The kit suits builders aged 14 years and up who want a helicopter subject with authentic engineering context and a strong presence in modern aviation history.  Warning! Not suitable for children under 14 years.

Model car kit

Italeri Audi Quattro Model Kit in 1:24 Scale

€32.99

The Italeri Audi Quattro model kit brings the classic road car into a detailed 1:24 scale format that places the build itself at the center of the experience. The plastic assembly kit translates the coupe silhouette, front-end character and compact proportions of the Audi Quattro into a display model that grows piece by piece across a longer bench session. With 600 minutes of assembly time stated in the data, this kit supports a measured approach to fitting, painting and final presentation. The 1:24 scale gives the finished car a balanced footprint for shelves, desks or display cabinets while still leaving room for visible body shaping and exterior detail. The assembly-kit format suits hobby sessions that can be spread across several stages, with each completed section adding more definition to the recognizable Audi Quattro form. The included component is the assembly kit itself. On a worktable, the model offers a focused car-building project with a clear subject and a well-known automotive profile. Once completed, the finished replica sits naturally among other 1:24 scale vehicles, whether arranged as a standalone display piece or as part of a broader model car collection. The age marking in the data is 14 Years.  Warning! Not suitable for children under 14 years.

Model car kit

Italeri Audi Quattro Rally Model Kit 1:24

€36.99

Italeri Audi Quattro Rally Model Kit 1:24 captures one of the defining rally cars of the early 1980s in a build centered on competition detail and period-correct finishing. The model is based on the Audi Quattro rally car that debuted in the World Rally Championship in 1981, bringing the shape of the 2-door coupe together with the visual character of its Monte Carlo-style racing livery. The kit uses an unpainted body shell and a multi-stage assembly layout that moves through the rolling chassis, cockpit, exterior trim and final body fit. Interior details shown in the build include racing seats, a dashboard with instrument markings, a steering wheel, a center console and a roll-cage structure. The front end can be finished with optional auxiliary rally lamps, while the rear section adds spoiler and bumper details that sharpen the competition stance. The super decals sheet covers body graphics, sponsor logos, number panels, license plates, gauges and seat markings, giving the finished model a dense layer of event-specific detail. During assembly, selected front wheel and steering connections are left unglued so movement remains in the completed chassis. That makes the build feel more mechanical while the model takes shape across the 600-minute assembly time. Paints, cement and tools are required separately. On a shelf, desk or hobby bench, the completed Audi Quattro Rally brings together classic 4-wheel-drive rally history, crisp 1:24 scale proportions and a finish that rewards careful painting and decal work.

Military figures & accessories

Italeri Austerlitz 1805 Battle Set 1:72 Model

€74.99

Italeri Battle Set Austerlitz 1805 Sokol. brings the Battle of Austerlitz into a 1:72 scale model scene built around the fighting near Sokolnitz. As a detailed plastic kit marked 14 Years+, it focuses on the build itself while giving the finished layout a clear historical setting tied to one of the defining clashes of the Napoleonic Wars. The source material places the action on 2 December 1805 near Austerlitz, in the battle also known as the Battle of the Three Emperors. It sets Napoleon's Grande Armee against the allied forces of Tsar Alexander I of Russia and Emperor Francis II of Austria, and highlights the confrontation as the decisive moment of the War of the Third Coalition. The historical account also points to key locations such as Tellnitz, Sokolnitz, the granary, the castle and the Pratzen Heights, which gives the scene a specific military context rather than a generic battlefield theme. On the worktable, the 1:72 format keeps the composition manageable while still allowing a broad battle setting to take shape. Once assembled, the set suits display alongside other Napoleonic models or use as part of a larger historical collection centred on the 1805 campaign.

Model trucks

Italeri Australian Truck Model Kit 1:24 Scale

€61.99

The Australian Truck from Italeri brings the road train style of long-distance outback transport into a 1:24 scale assembly kit with a finished model length of 33.2 cm. Its layout is based on the special equipment used on rugged, unsealed routes, so the build carries the visual weight of a truck prepared for extreme mileage and demanding terrain. The subject draws on the modifications named for Australian rigs, including a large bull-bar, wire mesh ahead of the windscreen, special dust filters, additional fuel tanks, heavy duty wheels, airconditioning and multiple driving lights. That combination gives the model a clear working identity rather than a generic highway truck silhouette. The kit also represents a right-hand steering configuration for this Western Star version, a detail that changes the cab layout and adds authenticity to the finished build. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the larger 1:24 format supports a measured, detail-focused build with visible progress across the cab, chassis and exterior equipment. Once completed, the 33.2 cm model suits shelf display alongside other truck subjects, while the road train theme connects it to the bulk-haul combinations that can run with up to 3 trailers over more than 31 metres in full-scale service.

Model figures

Italeri Austrian & Russian General Staff 1:72

€12.69

Italeri Austrian & Russian General Staff 1:72 brings a defined command scene into Napoleonic model building with 5 riders and 34 figures arranged around the allied leadership of Austria and Russia. The combination of mounted and standing poses gives a diorama base the structure of a parade, briefing, or pre-battle assembly rather than a generic troop grouping. The historical reference in the source material points to a moment before the Battle of Austerlitz in December 1805, when the Third Coalition faced Napoleon's Grande Armée. That setting gives the figures a precise place within early 19th century military displays and helps connect them with campaign-based layouts, staff scenes, and larger battlefield compositions. In 1:72 scale, the set fits naturally alongside other period troops, artillery, and cavalry used in the same modelling range. Painting sessions can focus on contrasting uniforms, mounted details, and the visual hierarchy between officers, rulers, and attendants. Once placed on a terrain base, the 39-piece group can anchor a headquarters vignette, a ceremonial review, or a wider historical arrangement built around the events of 1805. Age marking: 14 years  Warning! Not suitable for children under 14 years.

Model figures

Italeri Austrian Infantry 1798-1805 Model Kit

€10.49

The Italeri 1:72 Austrian Infantry 1798-1805 model kit brings a defined Napoleonic formation into scale form, centred on the troops that faced Napoleon's forces during the Marengo campaign of 14 June 1800. Its historical setting gives diorama builders and military model collectors a clear reference point for arranging battle scenes with period accuracy. The figures are presented with uniform elements taken from the era, including the typical short leather cap and a brass front plate bearing the imperial eagle. Some soldiers are also depicted with the 1798 helmet marked with Francis II's initials, a distinction associated here with Frei-Corps or Jager light infantry battalions. These variations help create a more nuanced formation instead of a single repeated look across the whole set. The 1:72 scale fits naturally into established military modelling layouts and allows the figures to combine with other scenery, artillery, and battlefield builds in the same scale. On the workbench, the detailed plastic parts invite careful trimming, assembly, and painting. Once finished, the figures suit regimented line-ups, campaign vignettes, and larger Napoleonic battle recreations where uniform differences and historical context shape the final scene. Age marking: 14 years and up.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri AV-8B Harrier II 1:72 Plastic Kit

€22.99

The Italeri AV-8B Harrier II 1:72 Plastic Kit brings a modern multirole aircraft into a compact build scale, combining the distinctive Harrier layout with a subject shaped by British and American aeronautical collaboration. As a detailed plastic kit, it focuses attention on the form and configuration of an aircraft developed for short takeoff and vertical landing operations. The AV-8B Harrier II marked a significant step beyond the first Harrier family aircraft. It was developed to operate from aircraft carriers without catapults, from amphibious assault ships, and from improvised landing strips, giving the original aircraft an unusually broad operating profile. That background gives the finished 1:72 model a strong real-world context rooted in naval and expeditionary aviation. The aircraft was widely employed by the United States Marine Corps, and its mission profile covered multirole attack and close air support duties across varied operational settings. On the bench, this aircraft subject suits builders who enjoy military aviation with a clear technical identity rather than a generic jet outline. Once assembled, the model fits naturally into displays focused on modern combat aircraft, carrier aviation, or Harrier family development. Minimum age: 14 years.  Warning! Not suitable for children under 14 years.

Model aircraft

Italeri B-17F Flying Fortress Model Kit 1:72

€39.99

The Italeri B-17F Flying Fortress model kit brings a landmark World War II aircraft into 1:72 scale, combining the unmistakable 4-engine heavy bomber layout with the long wing plan and fuselage form that defined the Boeing B-17 family. The B-17F variant represented a major step forward within the series and gives this build a strong historical identity on the workbench and in a finished display. In service with the United States Army Air Forces, the B-17 Flying Fortress was used extensively during World War II and became closely associated with daytime strategic bombing missions over the European front. The B-17F is described as offering extended operational range, a substantial offensive payload and defensive armament of 10 .50 caliber machine guns. Another defining characteristic of the full-size aircraft was its ability to return to base even after heavy structural damage, a trait that made the type especially respected among flight crews and helped secure its lasting place in aviation history. This 1:72 aircraft build suits focused assembly sessions, careful painting and historically minded presentation once completed. On a shelf, in a display cabinet or alongside other military aircraft in the same scale, the B-17F Flying Fortress stands out through its wartime role, recognisable silhouette and strong connection to the air campaign over Europe.

Military aeroplane models

Italeri B-52G Stratofortress Model Kit 1:72

€74.99

Italeri B-52G Stratofortress brings one of the best-known long-range strategic bombers in aviation history into a detailed 1:72 assembly kit. With a finished length of 67.4 cm, the model has the physical presence to show the aircraft's long fuselage, swept wing layout and multi-engine configuration clearly on the workbench and in a display setting. This version represents the B-52G, the most produced variant of the Stratofortress family. The subject reflects the changes that defined the G version, including a strengthened structure, updated avionic systems, increased fuel capacity and the option to carry external fuel tanks for longer operational range. Super decal sheets provide 4 version choices, opening the way to different USAF serials, insignia and unit markings during the finishing stage. The included color instruction sheet helps guide camouflage placement and decal positioning across those alternative schemes. Assembly is specified at 600 minutes. The historical setting adds extra depth to the build, with markings linked to aircraft used in the early 1990s and a version that took part in Operation Desert Storm in 1991. That combination of large scale, variant-specific markings and Cold War to Gulf War context gives the finished aircraft a strong presence whether the focus is careful painting, decal work or a collection centered on military aviation history.

Military figures & accessories

Italeri Bastogne Siege Battle Set Model Kit 1:72

€70.99

Italeri Bastogne Siege is a 1:72 battle set model kit built around one of the defining winter engagements of December 1944. The set brings infantry, armor and scenery into a single layout, making it possible to shape a snowbound battlefield with opposing forces, a damaged structure and route markers that echo the road-junction fighting around Bastogne. The kit contains 151 parts and centers the scene on 50 U.S. infantry figures, 36 German infantry figures, an M4A3E2 Jumbo and a Panther Ausf. G. A ruined house corner in laser-cut MDF introduces vertical structure and cover, while battlefield accessories such as obstacles, sandbags, crates, barrels, poles and signposts help break the ground plan into defensive positions and movement routes. The 2 armored vehicles are marked as Fast Assembly models, which keeps the focus on arranging the wider combat scene rather than on a vehicle-only build. Assembly is required, with a stated build time of 600 minutes. On a shelf, workbench or diorama base, the set supports a compact but layered recreation of the Bastogne siege, from street-edge fighting near damaged walls to armored movement past barricades and signs. The mixed contents also suit builders who want to paint winter uniforms, weathered armor and battlefield details within one coordinated WWII scene.  Warning! Not suitable for children under 14 years.

Military figures & accessories

Italeri Battle Set Sainte-Mere-Eglise 1:72

€74.99

Italeri Battle Set Sainte-Mere-Eglise 1:72 centers on the June 6, 1944 air assault in Normandy and turns that moment into a detailed WWII diorama build. The combination of the Sainte-Mere-Eglise Church, opposing troop groups and an Sd.Kfz. 251/1 Ausf. C gives the scene a strong focal point, with the road junction and church square shaping how the layout reads once assembled. The church is made from laser-cut MDF, which sets it apart from the figure frames and gives the town setting a distinct architectural core. Around it, 48 U.S. Paratroopers and 50 German Infantry allow broader scene composition than a small skirmish setup, with enough figures to spread action across entrances, walls and street edges. The 16 urban accessories add town details such as barriers, posts and street fixtures that help break up open ground and define positions. Decals add road signs, clock details and vehicle markings that sharpen the period look of the finished display. Assembly is required, and the stated assembly time is 600 minutes. Paints, tools and cement are required separately. Once completed, the set suits shelf display, historical scene building and tabletop layouts that focus on the Battle of Normandy through one specific location rather than a generic battlefield.

Military figures & accessories

Italeri Battlefield Accessories Model Kit 1:72

€9.49

Italeri Battlefield Accessories brings WWII diorama building into 1:72 scale with a scenery-focused assembly kit shaped around defensive field details and environmental structures. The set is built for model scenes that need more than a vehicle or figure alone, adding the visual language of barriers, trenches, poles, signs and storage pieces to a battlefield layout. The unassembled parts are arranged on sprues and include a mix of molded shapes suited to fortification and roadside scenery. Visible elements from the set include anti-tank obstacles, wooden barricade forms, a sandbagged defensive position, signposts, barrels, a crate and stacked stakes. This combination helps define routes, block passages and frame positions within a static display. The 600-minute assembly time points to a project with room for careful cutting, placement and finishing. At 1:72 scale, the accessories can be integrated into compact scenes while still giving enough variety to build layered terrain around military subjects. On a shelf, in a display case or as part of a larger historical setup, the kit supports scenes such as a defended roadside, a trench line or a fortified approach. Minimum age is 14 Years. Paints and further modelling equipment are required separately.  Warning! Not suitable for children under 14 years.

Model figures

Italeri Battlefield Accessories Model Kit 1:72

€14.99

Italeri Battlefield Accessories is a 1:72 assembly kit built to add structure, cover and terrain detail to historical military scenes. The set brings together fortification elements such as a wooden bridge, palisade sections, trench parts and defensive obstacles, so a diorama can move beyond open ground into a more defined battlefield layout. The 109-piece format gives room for different arrangements, with watchtower parts, gate sections, ramps, gabion-style baskets, barrels, shelters and wall details available for varied placement. These components support scenes around guarded crossings, defended camp edges and improvised front lines, while the mix of timber-style and brick-style surfaces gives painted finishes more contrast. Assembly is required, with a stated build time of 600 minutes. Paints, cement and tools are required separately. Once built, the accessories can frame troop positions, shape movement routes and break up larger terrain boards with vertical and low-profile cover. A bridge over a stream, a tower above palisades or trench sections linked by barriers can change how a 1:72 display reads from every angle. The kit is marked 14 Years+.

Model tanks

Italeri Bedford QL Truck 1:35 Scale Model Kit

€36.99

Italeri Bedford QL Truck 1:35 Scale Model Kit brings a late-1930s British military transport vehicle into a detailed build with a clear wartime identity. The Bedford QL line was developed for the British Army as a more modern and flexible transport vehicle, and this kit focuses on that medium truck format in 1:35 scale for a display piece with strong historical character. Following testing in 1940 and distribution in early 1941, Bedford QL trucks served with Army Corps, Regiments and other units across multiple fronts. Their relatively low weight and 4-wheel-drive configuration supported logistical and transportation duties in demanding conditions, while the same platform was also used for towing artillery such as the 6 pounder anti-tank gun and the 40 mm Bofors anti-aircraft gun. The subject therefore offers more than a vehicle shape alone; it connects the build to transport, field support and towing roles within British wartime operations. The assembly kit is intended for ages 14+ and has a stated assembly time of 600 minutes, making it a substantial project with room for careful finishing work. Marking options for 3 versions add variety to the final result, with reference schemes linked to British units in Egypt and El Alamein in 1942. Figures are not included. Paints are required separately.

Model tanks

Italeri Bergetiger 1:35 Support Vehicle Kit

€33.49

Italeri Bergetiger brings a rare armored recovery subject into 1:35 scale with a detailed plastic kit based on the modified Tiger I support vehicle. The model centers on the distinctive battlefield conversion in which the original tank lost its main gun and took on a crane for technical and logistical work around front-line armored units. The historical reference behind this version gives the build a very specific identity. Allied forces used the name Bergetiger for captured examples, following the same naming pattern seen on recovery vehicles derived from Panther and Panzer IV tanks. Contemporary accounts describe a machine that kept the Tiger I hull, tracks, and heavy armor while adding equipment intended for towing disabled tanks, lifting heavy components, carrying spare parts, and supporting repairs on other armored vehicles. No official production statistics are known, and the type is generally believed to have been assembled in small numbers by Wehrmacht field workshops at the front. That background gives the finished model a strong presence in military dioramas, workshop scenes, and vehicle lineups focused on support and recovery roles rather than direct combat. The 14 years age marking fits a build that rewards careful handling of a less common World War II vehicle subject and adds a distinctive variant to a 1:35 armor collection.

Military aeroplane models

Italeri Bf 109 G-2/G-6 Aces Model Kit 1:72

€16.79

Italeri Bf 109 G-2/G-6 Aces brings one of the most famous fighter aircraft of the Second World War into a compact 1:72 scale model kit. The Messerschmitt Bf 109 monoplane fighter became a defining aircraft of the Luftwaffe, and this edition centres on the G-2 and G-6 versions associated with well-known aces. The subject carries strong historical weight beyond its outline alone. Throughout the war, the Bf 109 was repeatedly upgraded in engines and armament to remain competitive against newer aircraft with higher flight performance. Together with the Focke-Wulf Fw 190, it formed the backbone of German fighter units, giving this build a clear place within the wider story of wartime aviation. The Aces designation connects the model to pilots from Jagdgeschwader 52 and to Erich Hartmann, the highest-scoring ace of the Second World War named in the source data. On the bench, the 1:72 format keeps the project compact while still leaving room for careful painting and finishing. Once assembled, the aircraft sits naturally in a display cabinet, on a shelf, or alongside other historic aviation models, where the familiar Bf 109 silhouette and ace-focused presentation stand out clearly. Age 14+

Military aeroplane models

Italeri Bf 110 C-3/C-4 Zerstorer Model Kit 1:72

€21.99

Italeri Bf 110 C-3/C-4 Zerstorer brings a well-known World War II twin-engine aircraft into 1:72 scale as an assembly kit shaped around the heavy fighter's long fuselage, twin tail layout and engine nacelles. The subject is based on the Messerschmitt Bf 110 in the C and C-4 variants, an aircraft used in roles that ranged from interceptor and fighter-bomber to reconnaissance, anti-ship missions and night fighting. The full-size aircraft was powered by 2 Daimler-Benz DB 601 engines rated at 1200 hp each and reached a maximum speed of 560 km/h, details that help define the proportions and mission profile of the model. Underwing external stores are part of the aircraft configuration, with bombs or additional fuel tanks used to extend operational range on the original machine. The kit is presented as a New Decals Edition and contains one model with a super decals sheet for 5 versions, giving the finishing stage a wider choice of codes, insignia and markings. Figures are not included. Assembly time is stated as 600 minutes. During the build, the 1:72 format keeps the project compact while still leaving room for painting, decal placement and careful finishing of the canopy, armament and undercarriage. On a shelf, desk or display cabinet, the completed Bf 110 C-3/C-4 stands out through its twin-engine silhouette and historically grounded configuration. Paints and tools are required separately.  Warning! Not suitable for children under 14 years.

Military ship models

Italeri Biber Midget Submarine Model Kit 1:35

€30.99

Italeri Biber Midget Submarine is a 1:35 assembly kit that recreates one of the most recognizable compact submarines used by the Kriegsmarine in the later years of World War II. With a finished length of about 186 mm, the model gives the narrow hull, raised conning tower and external weapon mounting layout enough room to stand out clearly on a shelf or in a naval diorama. The original Biber measured 9 m and was designed for a crew of 1, a combination that shaped its unusually small profile and focused mission role. Italeri carries that character into the build with the submarine's lean body, mast structures and the externally mounted torpedo arrangement that defined the type. Historical context adds depth to the finished model: development began in February 1944, the first units were launched 6 months later, and more than 300 Bibers were deployed before the end of the war. The real craft had a range of 240 km, a surfaced speed of 6.5 knots and a submerged speed of 5.3 knots. On the workbench, the kit suits builders who enjoy military naval subjects with a compact footprint and distinctive wartime markings. The included crew figures support dockside or underway presentation, while the alternate version options open up different paint and marking directions for a more individual result. Paints are required separately.

Model tanks

Italeri BMW R 75 with Side Car Model Kit 1:35

€11.99

The Italeri 1:35 BMW R 75 with Side Car assembly kit brings a historic military motorcycle into a compact display format, combining the distinctive sidecar layout with a finished model length of 6.6 cm. The subject represents the BMW R 75, a machine used in motorized units, and the sidecar-mounted MG 34 adds a clear mechanical focal point to the build. Beyond the motorcycle itself, the kit contains 3 figures that help shape a fuller scene around the vehicle. Their presence supports diorama planning with a stronger sense of movement, command or field transport rather than leaving the finished model as a standalone machine. The source subject also carries a recorded road speed of 92 km/h, a detail that underlines the fast dispatch role associated with this type of motorcycle. A decal for 1 version gives the finishing stage a defined marking option for the completed build. With a stated assembly time of 600 minutes, this model suits a slower, more deliberate build rhythm that leaves space for painting, fitting and display planning. On a shelf, in a cabinet or as part of a 1:35 military scene, the motorcycle, sidecar and figures create a compact composition with clear historical character. Age 14 Years+

Military figures & accessories

Italeri Brick Walls Model Kit 1:35 Scale

€9.49

Italeri Brick Walls brings a ruined masonry scene into 1:35 scale with an assembly kit built around miniature brick construction. The layout forms connected wall sections with uneven broken tops and a front opening, creating the look of a damaged building corner that gives a diorama immediate architectural structure. Instead of relying on one-piece cast scenery, the build uses small brick elements that are placed individually, so the wall texture develops course by course across corners, edges and openings. Loose bricks can be arranged at the base to extend the damaged setting into rubble and broken ground detail. This approach gives model makers control over how clean, collapsed or battle-worn the finished structure appears. The 600-minute assembly time points to a slower, detail-led project with room for careful alignment and surface finishing. The set is supplied as an assembly kit, and batteries are not included. On a display base, Brick Walls can frame military subjects, street scenes or standalone ruin studies with a more convincing sense of scale than a flat backdrop. The open wall sections leave sightlines through the structure, which helps when positioning vehicles, figures or debris around the finished build. Recommended age: 14 Years.

Model figures

Italeri British & Prussian General Staff 1:72

€10.99

Italeri British & Prussian General Staff 1:72 brings a key Waterloo moment into model form with a scene centred on the meeting of the Duke of Wellington and the Prussian Marshal Von Blucher. The assembly kit focuses on allied command rather than front-line combat, making it a distinctive choice for Napoleonic collections and battlefield displays. Set within the Seventh Coalition formed after Napoleon's return from exile on Elba, the subject gives the finished build a precise historical frame. British and Prussian staff figures can anchor a command post, map briefing or battlefield overview in a 1:72 layout. The emphasis on officers and leadership figures adds variety beside infantry, cavalry and artillery units already arranged in the same scale. Assembly is required, and the stated assembly time is 600 minutes. The included component is the assembly kit. On a shelf, in a display case or as part of a wider Waterloo diorama, the scene adds a recognisable command narrative through period uniforms, mounted officers and the meeting of two allied commanders. It also suits painters and builders looking to expand a Napoleonic setup with figures that mark decision-making and coordination at the centre of the battlefield.

Model figures

Italeri British Artillery Model Kit 1:72 Scale

€10.99

Italeri British Artillery in 1:72 scale brings a Waterloo era gun crew into a compact model kit built around field artillery, uniformed soldiers and scene-based display potential. The assembly kit combines 4 guns, 48 parts and unpainted figures, creating a focused historical subject that suits shelf presentation, diorama work and careful finishing at the workbench. The Napoleonic Wars theme gives the set a clear setting, while the British artillery designation narrows the scene to a specific battlefield role rather than a general troop mix. Unpainted surfaces leave room for period colour schemes, shaded uniforms, gun carriage detailing and weathered ground effects chosen by the builder. The 1:72 scale also makes the set easy to place with other historical miniatures, terrain sections and military scenery from the same scale range. With assembly required and a stated build time of 600 minutes, the project offers time for test fitting, painting stages and deliberate arrangement of the finished crew around the artillery pieces. On a display base, the figures and cannons can be arranged to suggest loading, aiming or firing positions drawn from British field operations of the Waterloo period. The set also works as a compact addition to a wider Napoleonic collection, where artillery teams add structure, movement and historical context to infantry or battlefield layouts.

Model figures

Italeri British Heavy Cavalry Model Kit 1:72

€10.99

Italeri British Heavy Cavalry Model Kit 1:72 brings a Napoleonic mounted unit into miniature form with 18 horsemen as an assembly kit. The scale gives battle scenes, display bases and historical arrangements a compact footprint while still leaving room for painted uniform detail, horse colours and formation spacing. The subject draws on British heavy cavalry from the Napoleonic Wars and connects the set to the charge of the Union Brigade at Waterloo under the Earl of Uxbridge. Regiments named in the source material include the Royals, the Scots Grey and the Inniskillings, giving the set a clear historical frame for painters and diorama builders. The unassembled parts format supports a step-by-step modelling process, from removing components from the sprue to fitting riders to horses and preparing surfaces for paint. The stated assembly time of 600 minutes marks this as a substantial bench project rather than a quick build. On a shelf, in a battle vignette or across a wargaming layout, the mounted figures can be arranged to suggest movement, charge formation and line-breaking action. The 14 Years marking fits the detailed handling that miniature assembly, painting and scene composition call for in a historical modelling set.

Model figures

Italeri British Infantry 1815 Model Set 1:72

€12.49

Italeri British Infantry 1815 brings a key Waterloo formation into 1:72 scale with 48 unassembled figures shaped for historical model scenes. The set draws on the British squares that resisted repeated cavalry attacks during the Napoleonic Wars, giving the finished formation a clear battlefield identity when arranged in ranks on a display base or diorama. The sculpted figures depict British infantry with period uniforms, tall shakos, Brown Bess flintlock muskets and fixed bayonets. Different poses visible on the sprues, including standing and kneeling riflemen, help break up repeated lines and support more natural unit placement across a scene. The reference to the 2nd Regiment Coldstream Guards ties the set to one of the best-known units at Waterloo and to the defense of Hougoumont farm. As an assembly kit, the figures arrive ready for removal from the sprue, cleanup, painting and placement, with an assembly time of 600 minutes. On a wargame table, the formation suits British line positions, defensive squares and farmstead actions from 1815. In a display cabinet, the 1:72 scale works well alongside other Napoleonic figures, artillery and terrain pieces to build a broader Waterloo setting with consistent proportions.

Military aeroplane models

Italeri C-130 E/H Hercules Aircraft Kit 1:72

€51.99

The Italeri C-130 E/H Hercules assembly kit recreates a landmark military transport aircraft in 1:72 scale, with a finished model length of 39 cm that gives the four-engine airframe real presence on the shelf. High-mounted wings, a tall tail and the broad fuselage shape capture the unmistakable outline of the Hercules in a format built for hands-on model making. The subject itself carries a long operational history, with the C-130 serving in many roles across more than 50 air forces. That background gives the build extra depth when working through the aircraft's structural layout, from the transport fuselage to the 4 propeller-driven engine positions. Decals for 5 versions add further finishing choice, supporting different markings and operator identities rather than a single fixed scheme. The kit is designed as an assembly project and the stated build time of 600 minutes reflects a more involved construction process. During the build, the large airframe gradually takes shape as fuselage sections, wing assemblies and tail components come together into a recognisable cargo plane silhouette. Once completed, the 39 cm format and 1:72 scale make the model well suited to display alongside other military aircraft builds. Cement, paints and tools are required separately.

Military aeroplane models

Italeri C-130 J Hercules PRM 1:72 Model Kit

€52.99

The Italeri 1:72 C-130 J Hercules PRM Edition model kit brings the modernized Hercules transport aircraft into a detailed build with a finished model length of 41 cm. Its high-wing layout, broad fuselage and 4-engine configuration give the aircraft its unmistakable cargo-plane presence, whether placed on a shelf or worked through as a long-form assembly project. This version focuses on the extensively redesigned C-130J. The real aircraft uses 2 4700 HP Rolls-Royce Allison AE2100D3 engine systems driving 6-blade composite-material propellers, and that updated configuration shapes the character of the model. The subject also reflects the aircraft's revised avionics, with digital cockpit instruments and a Head-Up Display noted as part of the full-scale design. Decals for 3 versions allow different service markings and liveries to be applied to the same airframe, which changes the visual finish without changing the core structure. Assembly is required, and the stated assembly time is 600 minutes. The 1:72 scale suits builders who enjoy aircraft subjects with enough surface area for careful painting, weathering and decal work. On the bench, the transport fuselage, wing structure and engine arrangement create a build with clear stages; once completed, the long silhouette and military markings give the aircraft a distinct display presence.

Military figures & accessories

Italeri Cannone da 149/40 with Crew Model Kit

€10.99

The Italeri Cannone da 149/40 with Crew model kit brings a World War II artillery subject into 1:72 scale with a long-barrel field gun and a full team of figures that give the scene immediate structure. The combination of cannon, crew and small battlefield accessories creates a compact display subject that reads clearly on a shelf or as part of a wider military layout. The gun is based on the Cannone da 149/40 mod. 1935 and uses the distinctive features of this artillery type, including the long barrel, large spoked wheels and split trail carriage. Alongside the cannon, the set provides 9 unpainted figures in different poses, allowing the finished scene to suggest loading, observation, command and gun handling rather than a static single-figure display. Small accessories such as ammunition pieces and crates add extra context around the emplacement. The parts are moulded for assembly as a classic scale kit, and the stated assembly time is 600 minutes. Paints are required separately. Once built, the set suits historical dioramas, cabinet display and focused painting sessions where figure uniforms, equipment and gun details can be finished with individual attention. The 1:72 scale also makes the completed cannon easy to place with other military miniatures, vehicles or terrain from the same period.

Model trucks

Italeri Cargo Trailer Model Kit 1:24 Scale

€61.99

The Italeri Cargo Trailer brings a latest-generation European semitrailer into 1:24 scale, with a finished model length of 58.0 cm that gives the build real presence on a shelf or in a road-haulage scene. Its long cargo body, rear door layout and tri-axle undercarriage capture the look of a full-size on-road trailer used in modern freight transport. The assembly kit is built around a detailed chassis and body structure, with separate panels, underbody parts, mudguards and wheel assemblies that shape the trailer step by step. New wheels add updated visual detail to the running gear, and the 8-tyre layout reinforces the heavy commercial character of the finished model. The included super decals sheet covers 2 versions, with DUSSOL Pere & Fils and MONJEAN Transporte liveries shown in the kit material, plus smaller markings such as plates, speed signs and technical labels that sharpen the scale finish. Assembly is required and the stated build time is 600 minutes. Paints are required separately. Marked for ages 14 years+, this model suits focused bench sessions where chassis work, body assembly and final finishing each have their own pace. Once completed, the 1:24 Cargo Trailer fits naturally into truck collections, transport dioramas and display lineups centered on European commercial vehicles.

Military aeroplane models

Italeri Carrier Deck Section 1:72 Model Kit

€28.99

Italeri Carrier Deck Section 1:72 Model Kit builds a modern aircraft carrier flight deck section with the visual tension of launch preparation built into the surface itself. The 40.5 x 23.5 cm format gives 1:72 naval aircraft a defined base for display, while the catapult area and deck layout create a clear operational setting instead of a plain stand. The moulded structure focuses on carrier-specific equipment. The catapult section can be positioned after checking the length of the selected aircraft, so the layout can be matched to different 1:72 carrier-based models. A Jet Blaster Deflector sits behind the launch position and is reproduced with hydraulic cylinders that show how the panel is raised and lowered on the real deck. The included decal sheet adds runway-style lines, warning striping, and deck markings that sharpen the finished look and help separate launch, handling, and edge areas across the surface. Figures and aircraft are not included. On a shelf, in a display case, or as the base for a photographed build, the deck section gives parked jets, launch-ready aircraft, and maintenance scenes a more convincing context. Assembly is required, with an indicated build time of 600 minutes. This kit is marked for ages 14+.

Model tanks

Italeri Carro Armato L6/40 Tank Model Kit 1:35

€34.99

The Carro Armato L6/40 from Italeri brings a compact Italian Second World War light tank into 1:35 scale, combining a focused build with the distinct proportions of a vehicle developed for reconnaissance and infantry support. Its small turret, low profile, and 2-man layout give the model a clear historical character on the bench and in a finished military display. The original Fiat L6/40 entered service in 1941 and was designed in the late 1930s, which places this subject in an early-war armored context with a very specific battlefield role. The commander also operated the cannon, a layout that shaped the real vehicle's internal arrangement and helps explain its compact form. Main armament on the full-size tank consisted of a 20 mm Breda 20/65 Mod. 1935 cannon mounted in the turret, paired with an 8 mm Breda 38 coaxial machine gun. That combination made the L6/40 suitable against light vehicles and lightly protected targets, while heavier armored opponents lay outside its strengths. The subject also opens several historically grounded display directions, since the L6/40 served in North Africa, the Balkans, and on the Eastern Front. A finished 1:35 build can therefore sit naturally in desert, urban, or winter diorama settings, or stand alone as a compact study of Italian wartime vehicle design. The age marking is 14 Years.  Warning! Not suitable for children under 14 years.

Model tanks

Italeri Carro Armato P40 Model Kit 1:35 Scale

€36.99

Italeri Carro Armato P40 is a 1:35 scale military vehicle model kit that brings the late-war Italian heavy tank into a focused build with strong historical character. The finished subject combines inclined front armour, riveted construction and the long 75/34 Ansaldo gun, creating a silhouette that stands out in a display cabinet or diorama scene. The design reflects the P26/40 development path described in the source material, where Italian armoured vehicle engineering moved toward heavier protection and stronger firepower. A 420 HP diesel engine formed part of that full-size tank concept, and the model captures the external features tied to that shift, including the more modern hull geometry. At the same time, the build preserves period details such as riveted armour plates and the leaf spring suspension system, giving the subject its distinctive mid-war mechanical character. The kit also supports careful finishing work through alternate markings, with decals for 2 versions that allow different historical presentations of the same vehicle. With 600 minutes assembly time, this kit suits a slower bench session built around fitting, painting and final detailing. Paints, glue and tools are required separately. Once completed, the Carro Armato P40 fits naturally into WWII armour collections, historical dioramas and shelf displays where the angular turret, side skirts and tracked stance can be fully appreciated.

Model tanks

Italeri Char B1 Bis 1:56 Tank Model Kit

€21.99

Italeri Char B1 Bis in 1:56 scale brings the distinctive shape of the French Char de Bataille to the workbench as a detailed military vehicle model kit. The 12.1 cm finished length gives the tank a compact display size, while 85 parts provide enough structure for a rewarding build with visible track runs, turret detail and the front casemate layout that defined the original vehicle. The kit is designed with version choice in mind. Builders can assemble either a standard tank or a flamethrower version, and the marking sheet extends that flexibility with 6 finishing options. Cartograf decals supply names, numbers, crosses, roundels and unit insignia for French and German service variants, including Vercingetorix, Maginot and Gaston de Foix. The subject itself reflects the Char B1 bis configuration, known for its 47 mm turret cannon and 75 mm howitzer mounted in the front hull. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a diorama or alongside 1:56 gaming forces, the model carries the broad tracks, riveted surfaces and heavy silhouette associated with early Second World War armour. The included 3 figures add extra scene-building potential around the turret and hull, while the different version paths invite a finish that leans toward French 1940 service or later German conversions. Paints, glue and tools are required separately.  Warning! Not suitable for children under 14 years.

Model tanks

Italeri Chevrolet 15 CWT 1:35 Plastic Kit

€30.99

The Italeri Chevrolet 15 CWT is a 1:35 scale plastic kit that captures the compact proportions and working character of a Commonwealth military truck. The finished subject combines a boxy cab, rugged running gear and a covered or open rear transport body, giving the build a strong period silhouette suited to historical vehicle collections. The kit is designed as a detailed assembly project and is marked 14 Years+. Sprue layouts shown in the set include separate chassis parts, body panels, cargo-bed components, clear parts and wheel elements, so the build develops through distinct structural stages rather than a single-piece shell. The subject is based on the Chevrolet 15 CWT, a four-wheel-drive vehicle used in military logistics and towing roles during World War II. A driver figure is not included. Paint guidance in the set references colours such as Flat Black, Flat Field Drab, Gloss Silver, Sand, Dark Green, Flat Rust and Rubber Black, supporting finishes that match the chosen scheme. The new decal sheet allows 3 historical versions: a Canadian Army vehicle in Normandy, July 1944, a British Army vehicle in Southern Italy, summer 1944, and an Australian Army vehicle at El Alamein, November 1942. Assembly kit contents are included. Assembly is required, with a stated assembly time of 600 minutes.  Warning! Not suitable for children under 14 years.

Military helicopters

Italeri Chinook HC.1 / CH-47D Model Kit 1:48

€57.99

Italeri Chinook HC.1 / CH-47D brings the distinctive tandem-rotor silhouette of Boeing's heavy-lift helicopter into a 1:48 scale assembly kit with a finished length of 34.0 cm. The long fuselage, raised front cockpit, tail rotor pylon and transport-helicopter layout give the completed aircraft a commanding presence in a military aviation collection. The subject draws on a helicopter family developed for transport duties and adopted in several versions by operators around the world. This kit focuses on the HC.1 / CH-47D configuration and uses upgraded moulds to reproduce the airframe with sharper structural detail across the fuselage and exterior surfaces. The decal content opens up 3 marking options, including service titles, serials, warning stencils and cockpit details that add scale depth beyond the main airframe parts. A 600-minute assembly time suits builders who enjoy a longer project with painting, marking placement and careful sub-assembly work across the cabin, undercarriage and rotor sections. On the bench, the model offers a steady sequence of cutting, fitting, cementing and finishing steps that reward patient work. Once completed, the 34.0 cm helicopter suits display alongside other 1:48 military aircraft or as a standalone centrepiece that highlights the Chinook's unmistakable twin-rotor form.

Military figures & accessories

Italeri Confederate Infantry Model Kit 1:72

€10.99

Italeri 1/72 Confederate Infantry (Amer.Civil War) is a historical figure model kit built around 50 unpainted figures for American Civil War scenes. The 1:72 scale gives the set a compact footprint while still leaving room for rifles, field gear and varied uniform details to stand out once painted and arranged across a diorama or display base. The subject reflects the Confederate army formed in 1861, with uniforms described in the source material as diverse rather than standardized. That variation gives the painting stage more visual range across coats, trousers and equipment, instead of locking the whole set into one repeated finish. The figures appear on sprues as an assembly kit, so each stage can be handled in sequence: removing parts, preparing surfaces, painting details and placing the finished soldiers into formation. Command and action poses support scenes with movement and direction, while the larger group size helps create depth across front and rear ranks. A 600 minute assembly time suits a project that can be spread across several sessions at the workbench. Once completed, the set can anchor a battlefield vignette, expand a wider American Civil War collection or add infantry presence beside matching 1:72 historical models and scenery.

Model tools

Italeri Craft Knife Set with 6 Blades

€16.99

The Italeri Professional Craft Knife with 6 blades brings precise cutting control to model making, paper work and other detailed bench tasks. A metal handle with a knurled silver grip, blue upper section and gold collar gives the knife a balanced, tool-like feel in hand while guiding careful cuts along edges, markings and small components. The included blade set supports repeated use across longer projects, with replacement blades ready when a fresh edge is needed for clean trimming. This format suits builders who work through assembly stages over time, especially where accurate scoring, shaping and material removal help parts fit neatly. The 600 minute assembly time in the product data points to projects with a longer build rhythm, where a dedicated cutting tool stays in regular use rather than appearing for a single step. On a modelling bench, the knife can be kept close for opening cut lines, refining small sections and preparing surfaces before the next stage of a build. Used alongside an assembly kit, it supports focused, controlled work on fine details and helps keep intricate hobby tasks precise from the first cut to the final adjustment.

Model tools

Italeri Craft Knife with 5 Blades No. 11

€8.29

The Italeri Craft Knife with 5 blades No. 11 brings a precise cutting tool to model benches and craft tables, combining a slim metal handle with the narrow pointed blade shape used for close, accurate work on small parts and marked lines. The No. 11 format is suited to trimming, scoring and careful carving where a broader blade would block the view of the cut. The handle features a textured knurled section that helps keep finger placement steady during short controlled movements. Alongside the fitted blade, 4 spare blades are supplied, so fresh cutting edges are ready when a task calls for a cleaner pass through paper, masking material or thin modelling stock. Protective caps are also included for covered storage between work stages. Assembly is required. Assembly time: 600 minutes. On a model bench, the knife supports clean preparation before painting, fitting or finishing, and it also suits paper crafts that rely on narrow cuts and sharp corners. The compact format works well for keeping one blade in use while the remaining No. 11 inserts stay ready as replacements for later sessions.

Model tanks

Italeri Cromwell MK. IV Tank Model Kit 1:56

€21.99

Italeri Cromwell MK. IV brings a key British WWII tank into 1:56 scale as a detailed plastic model kit with a compact 11.3 cm finished length. The build centers on the Cromwell's low, purposeful silhouette, tracked layout and turret-mounted 75 mm gun, creating a military model that reads clearly on a shelf and sits naturally alongside tabletop forces. The real Cromwell was developed to replace the Crusader in the Cruiser Tank role, and that background gives the model its distinct character. Its full-size counterpart was known for speed of more than 60 km/h and strong manoeuvrability, balanced with decent armour and armament for engagements against similar armoured vehicles. Italeri translates that identity into a 55-part build that focuses on the hull, turret and suspension-driven running gear rather than oversized complexity. Decals for 2 versions support different finishing choices, and the included markings help place the tank in a more specific historical setting once paint and weathering are applied. On a wargaming table, the 1:56 scale suits formation-based displays and vehicle line-ups; on a shelf, the compact footprint keeps the shape and markings easy to read at a glance. Assembly kit contents are included. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Model tanks

Italeri Cromwell Mk.IV Model Set Tank 1:56

€24.99

The Italeri Cromwell Mk.IV Model Set brings a fast British Cruiser Tank of the Second World War into 1:56 scale, combining a compact footprint with the distinct proportions of the Cromwell family. Its subject is the Cromwell Mk.IV, a vehicle developed by the British Army to replace the Crusader, with a layout shaped around speed, manoeuvrability and a turret-mounted 75 mm gun. That historical background gives the build a clear identity beyond a generic armoured vehicle. The real Cromwell could reach over 60 km/h, a notable figure for a tank of its period, and its suspension played a central role in balancing pace with control. Armour and armament were matched for engagements against similar armoured vehicles, while the 75 mm gun could use the same ammunition as Allied tanks such as the Sherman. The same vehicle also served in close support for infantry, which adds another authentic context for painting and presentation. On a shelf, in a diorama or alongside other 1:56 military subjects, the finished Cromwell Mk.IV carries a recognisable British wartime profile. The 14 years age marking places the set in a range suited to builders who want a historically grounded tank subject with a defined role, a named variant and a scale that fits broader military collections.  Warning! Not suitable for children under 14 years.

Trailers & accessories

Italeri Curtainside Trailer Model Kit 1:24

€59.99

The Italeri 1:24 Curtainside Trailer model kit brings a modern European freight trailer into scale form with a 58.0 cm finished length, a 3-axle layout and sliding canvas sides that define this widely used transport design. The moving side-curtain concept is central to the real trailer type, allowing merchandise loading and unloading from the side rather than only through the rear. This assembly kit represents the trailer with solid tail gates and frame protection, matching the road-going structure seen across general freight transport in Europe. The Schoeni CH livery adds a distinctive logistics look, and the included super decal sheet carries company graphics, regulatory markings, speed signs and trailer details that give the finished model a more complete commercial identity. New wheel rims refine the undercarriage appearance, while the long trailer body creates a strong presence beside a compatible 1:24 tractor unit. The tractor is not included in the box. Paints and tools are required separately. With 600 minutes of assembly time, the build suits model-making sessions that focus on painting, decal application and careful trailer detailing. Once completed, the 58.0 cm trailer works well as a display centrepiece in a truck collection or as part of a 1:24 road transport scene with a separately matched tractor unit.

Model tools

Italeri Cutting Mat A 230 x 160 mm Hobby Mat

€9.99

The Italeri Cutting Mat A brings a defined cutting surface to model benches with a self-healing mat body, a printed measurement grid and diagonal angle guides. Its compact format supports trimming, marking and alignment work in a controlled area, whether sheet material, decals or small model parts are being prepared for the next build step. The mat is shown with a rectangular shape, rounded corners and visible number markings around the edges, giving clear reference points for measuring and positioning. The stated size is 230 x 160 mm, while the mat print shown in the image reads 220 x 180 x 3 mm, so the usable format is presented here only as provided by the product data. The 3 mm thickness shown on the mat adds a defined working layer between the bench and the blade path. Grid intersections and diagonal guides help when checking spacing, repeating cuts or setting angles before a knife touches the surface. On a modelling table, this format suits focused tasks such as trimming decals, cutting masking material or squaring small parts before assembly. Assembly kit for ages 14+; assembly required, assembly time 600 minutes.

Model car kit

Italeri DAF XF 95 Super Space Cab Truck Kit

€61.99

The Italeri DAF XF 95 Super Space Cab arrives as a detailed 1:24 truck kit that recreates one of the most recognisable DAF long-haul vehicles of the 1990s and early 2000s. Its Super Space Cab layout gives the model a commanding road-going look, with the tall cab shape setting the tone for a build that carries the character of a working European tractor unit. This subject draws on a full-size truck known for combining period technology with high operational efficiency on long-haul routes. The spacious cab was regarded among the roomiest on the market, and that distinctive proportion shapes the finished replica from every angle. At the same time, the original vehicle balanced the large cab within a cohesive overall design, so the model presents broad surfaces, a defined front section and a clear commercial-vehicle stance. The detailed kit format leaves room for careful painting and finishing choices that can underline the truck's era and road transport identity. On a worktable, in a display cabinet or alongside other 1:24 commercial vehicle builds, the DAF XF 95 Super Space Cab brings a strong fleet-truck presence. It suits builders who enjoy tractor units with real transport history and a cab design that became a signature part of the vehicle's appeal.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri Dakota Mk. III Aircraft Model Kit 1:72

€34.99

Italeri Dakota Mk. III brings one of the best-known military transport aircraft of the 20th century into a 1:72 aircraft model kit with a finished length of 27.2 cm. The twin-engine Douglas C-47 variant served in logistic transport, tactical transport, paratrooper drops and medical evacuation, giving the subject a strong historical identity before the first parts are even removed from the sprue. The build centers on the Dakota configuration used by the British Royal Air Force and Commonwealth forces, while the marking options widen the scope to 4 different service versions. The airframe is powered in full scale by 2 Pratt & Whitney 1,200 HP engines and reached a top speed of 360 km/h, with a pay-load of 2,500 kg or capacity for 28 troops. Those full-size figures shape the model's broad fuselage, twin-prop layout and transport stance. The kit also allows optional open or closed wing panels, adding a specific display decision during assembly rather than limiting the finished aircraft to a single look. On the bench, the combination of sprue-based construction, painting work and waterslide markings creates a focused aircraft build with visible progress across fuselage, undercarriage and propeller assemblies. Radio gear, a battery pack, a charger and paints are not part of this kit; cement and standard model-building tools are required separately. Once completed, the Dakota Mk. III suits shelf display, diorama scenes or a line-up with other 1:72 military aircraft.

Model tanks

Italeri Dodge WC62 1:35 6x6 Truck Model Kit

€26.99

The Italeri Dodge WC62 1:35 6x6 Truck Model Kit recreates a military transport vehicle introduced in 1943 for United States Army service. As a detailed scale build, it captures the long wheelbase layout, the extra rear axle, and the unmistakable profile of the 1.5-ton truck in a format suited to careful assembly, painting, and display. The original Dodge WC62 was developed to carry equipment or up to 12 fully equipped soldiers, and that heavy-duty role shapes the model's character throughout. Its 6-wheel-drive configuration, sturdy chassis, and leaf-spring suspension define the mechanical layout, while the open cab with fold-down windshield adds a field-use detail that changes the whole look of the vehicle. The full-size truck used a 92 HP Dodge inline 6-cylinder engine, a key part of the design behind its broad wartime use across difficult terrain and changing operational conditions. On the bench, these features give the build a strong historical identity and plenty of scope for military finishes, convoy scenes, and World War II dioramas. The 1:35 scale works well alongside other vehicles, figures, and scenery in the same scale, allowing the completed Dodge WC62 to take its place in a wider period setting. 14 Years marks the recommended age for this model kit.  Warning! Not suitable for children under 14 years.

Model aircraft

Italeri Dornier Do 217 J1/J2 Nachtjager 1:72

€35.99

The Italeri Dornier Do 217 J1/J2 Nachtjager in 1:72 turns a notable Second World War night fighter into a detailed plastic kit with a strong technical identity. The twin-engine high-wing layout gives the aircraft its unmistakable silhouette, while the J1/J2 configuration places the build in the role of a dedicated night interceptor. This version of the Do 217 was developed for missions against Allied bombers and carried the Lichtenstein radar for target identification in low-visibility conditions. The forward nose section was heavily armed with 20 mm cannons and 7.92 mm machine guns, giving the aircraft a concentrated frontal weapons layout that stands out on the finished model. Historical source data for this aircraft also notes a maximum speed of 500 km/h, adding another concrete point of reference for the type represented here. On the shelf, the combination of radar equipment, twin-engine structure and high-wing design gives the completed aircraft a distinct presence among military aviation builds. The subject suits builders interested in Luftwaffe night fighter development and in aircraft variants shaped by a specific operational role rather than by general bomber use alone.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri Douglas SBD-3 Dauntless Model Kit 1:48

€30.99

The Douglas SBD-3 Dauntless from Italeri captures a 1:48 scale version of the U.S. Navy carrier-based dive bomber that entered active service in 1941. Its single-engine, low-wing configuration gives the aircraft its unmistakable silhouette, while the SBD-3 variant connects the build directly to one of the most decisive air campaigns of the Pacific War. This aircraft served in both reconnaissance and dive bombing missions, which gives the model a clear operational identity beyond its outline alone. The full-size SBD-3 was powered by a Wright R-1820 Cyclone radial engine and reached 410 km/h, details that anchor the subject in the engineering of the period. Its wartime configuration also included two forward-firing 12.7 mm machine guns and two rear-facing 7.62 mm machine guns, along with a bomb load of nearly 2,000 kg. The Battle of Midway in June 1942 made the SBD-3 especially notable, as this version played a key role in the sinking of Japanese aircraft carriers. On the bench or in a display cabinet, the Dauntless brings together naval aviation history, recognisable aircraft architecture and a clearly documented combat role. Recommended age: 14 years.

Trailers & accessories

Italeri Dumper Trailer 1:24 Scale Model Kit

€57.99

Italeri Dumper Trailer brings a 1:24 scale construction transport subject into model form with the long proportions of a 3-axle semi-trailer, a large tipping bucket and Schmitz Cargobull markings. The finished replica captures the look of a bulk-haul trailer standing ready on rough site access roads or beside a loading area. The trailer concept in the source data is built around earth and building debris transport, and that working role shapes the details throughout the kit. A steel chassis is specified for the original trailer design, while the model adds visible underframe structure, triple wheel stations, mudguards, landing legs, a ladder and a front platform with railings. The tipping body is a central feature, and the instructions show the raised dump position as well as body mounting points and lift-cylinder detail. Open and closed version parts are included for the cover arrangement, adding another distinct configuration to the build. The decal sheet extends the finish with large Schmitz Cargobull graphics, reflective markings, speed decals, technical labels and several European-style registration choices. With a model length of 37.0 cm, the completed trailer has the presence to stand on its own or alongside a matching 1:24 truck tractor. Assembly is required, with a stated assembly time of 600 minutes. Paints are required separately.

Military aeroplane models

Italeri EF-111 A Raven Aircraft Model Kit 1:72

€31.99

Italeri EF-111 A Raven brings a distinctive electronic warfare aircraft into 1:72 scale, combining the swept lines of the F-111 platform with the prominent rear-fin fairing that set the Raven apart in service. The grey injection-moulded parts frame the aircraft as a detailed bench build, where the variable-geometry wing layout, twin-engine fuselage form and military markings come together in a compact display model. The subject draws on the General Dynamics EF-111 Raven, an aircraft developed from the F-111 Aardvark for electronic warfare missions. Source details for this kit highlight terrain-mapping radar, radar jamming systems, electronic countermeasures and a redesigned cockpit configured for the Electronic Warfare Officer, giving the finished model a strong technical identity beyond its airframe shape alone. The kit also provides external stores, landing gear components, canopy parts and finely moulded surface sections that support careful painting and finishing work. A new super decals sheet covers 2 versions, including serial 67-0052 from the 42nd ECS, 66th ECW at RAF Upper Heyford in July 1987, and serial 66-0019 from the 429nd ECS, 27th ECW at Cannon AFB, New Mexico, in 1995. With an assembly time of 600 minutes, this aircraft model suits an extended build paced across several sessions at the workbench. Once painted and marked, the EF-111 A Raven sits naturally in an aviation collection, on a shelf with other 1:72 military aircraft, or as a standalone display focused on Cold War and modern air power subjects. Model for adult modellers age 14 and over.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri F-104G/S Starfighter Model Kit 1:32

€104.99

Italeri F-104G/S - RF-104G Starfighter - Upgraded Edition brings the sharp lines of the Lockheed Martin aircraft into a 1:32 scale plastic kit with Pod Orpheus parts for an RF configuration. The long fuselage, pointed nose and external stores create a striking bench presence while the larger scale leaves room for a more involved finish across panels, markings and equipment. The assembly kit is designed for builders aged 14+ and develops over 600 minutes, giving time to work through subassemblies, alignment and paint stages with care. Photo-etched parts add finer metal detail where thinner components matter visually, especially when the model is viewed up close. The marking set goes beyond basic insignia: the decal sheets carry serials, rescue arrows, no-step stencils, squadron badges and national symbols that help define different service appearances. Markings for equipment such as Pod Orpheus and other airframe details support a more technical finish across pylons, tanks and reconnaissance fittings. On the workbench, the larger 1:32 format suits careful painting, decal placement and weathering, whether the focus is a cleaner operational look or a more used airframe. Once completed, the Starfighter's slim silhouette, metallic surfaces and variant-specific markings give the aircraft a strong display character in a collection of modern military aviation subjects.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri F-111A Aardvark Model Kit 1:72

€31.99

The Italeri F-111A Aardvark model kit in 1:72 scale brings a landmark military aircraft into a compact build with a strong technical identity. The General Dynamics F-111 Aardvark combined twin-engine power, supersonic performance and variable-sweep wings, creating a silhouette that still stands apart in aviation history. Produced from the late 1960s and used until the late 1990s, the original aircraft marked a major step in combat aircraft design. It was capable of reaching Mach 2.5 and carrying a substantial offensive payload, while a pressurized cockpit placed its 2 crew members side by side rather than in tandem. An escape module formed part of the emergency ejection system, adding another distinctive engineering feature to the aircraft itself. Sophisticated radar and terrain-following systems allowed low-level flight in poor visibility conditions, a capability that shaped its role in nighttime bombing missions and low-altitude attack profiles. That combination of swing-wing engineering, 2-seat cockpit layout and long service history gives the finished 1:72 aircraft a strong presence in military aviation displays. The subject suits builders aged 14 years and up who want a model linked to Vietnam War operations and late Cold War aircraft development.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri F-117A Stealth Nighthawk Model Kit 1:72

€14.99

The Italeri 1:72 F-117A Stealth Nighthawk model kit brings the unmistakable lines of Lockheed's stealth aircraft into a 28 cm display format. Its sharply faceted fuselage, canted tail fins and low-profile planform give the finished aircraft the same angular presence that made the original design instantly recognizable on the flight line. This assembly kit is built around the F-117A's signature geometry rather than rounded conventional jet shapes, which gives each stage of the build a precise, technical character. The parts layout shown for the kit covers the main airframe, clear canopy elements, landing gear components, bay doors and smaller detail pieces that shape the underside and cockpit area. A decal sheet for 1 version supports the finishing stage with aircraft markings tied to the featured scheme. The source material for this subject points to the 4450th Test Group, USAF, Tonopah, 1989, giving the completed aircraft a defined historical setting. Assembly is required, with a stated build time of 600 minutes. On the bench, the 1:72 scale suits careful painting, decal placement and detail work without demanding the footprint of a larger aircraft build. Once completed, the 28 cm model sits comfortably in a display cabinet, on a shelf or alongside other military aircraft in the same scale, where the black finish, angular wing surfaces and twin fins create a striking silhouette from every angle.

Military aeroplane models

Italeri F-14A TOMCAT Aircraft Model Kit 1:48

€29.99

The Italeri F-14A TOMCAT brings the lines of the U.S. Navy's carrier-based fighter into a 1:48 aircraft model kit with a finished length of 39 cm. Its shape is defined by the Tomcat's twin-engine layout, broad fuselage and swing-wing configuration, giving the completed build the unmistakable stance of this long-serving naval aircraft. The assembly kit uses molded parts to form the cockpit, fuselage, tail surfaces and undercarriage, while the internal wing linkage lets both variable-sweep wings move in sync. The build sequence also calls for 30 g of ballast in the nose, a practical detail that supports correct balance once the landing gear is fitted. Clear canopy parts frame the cockpit area, and the external stores layout adds further substance with missiles, pylons and drop tanks mounted under the airframe. Decals for 1 version provide the markings needed to finish the aircraft in a specific service scheme. Assembly is required and takes 600 minutes. On the workbench, the mix of structural assembly, painting and decal placement creates a project with distinct stages rather than a single quick session. Once completed, the 39 cm model suits display on a shelf, in a cabinet or alongside other 1:48 military aircraft, where the swept planform, twin tails and carrier-jet loadout stand out clearly.

Military aeroplane models

Italeri F-15C Eagle Model Kit 1:48 Scale

€41.99

The Italeri F-15C Eagle model kit in 1:48 scale captures one of the best-known modern fighter aircraft in a format that suits a detailed bench build and a striking finished display. As a single-seat all-weather jet developed to secure air superiority, the F-15C brings a clear operational identity to the project, with sharp lines and a purposeful twin-engine layout that stand out once assembled. This plastic kit draws on the C version of the McDonnell Douglas F-15, the evolution that remained in wide service with the U.S. Air Force and U.S. National Guard and also flew with the air forces of Israel, Japan, and Saudi Arabia. The type played an active role in the first Gulf War, where it achieved the highest number of enemy aircraft shootdowns for Coalition forces. That background gives the finished aircraft a strong historical setting beyond its technical form. The full-size jet combines a 20 mm M61 cannon with a broad air-to-air weapons capability, while the twin Pratt & Whitney F100 afterburning engines pushed performance to Mach 2.5. On the workbench, those defining features translate into a military aircraft subject with a clear late-Cold-War and Gulf War presence. The 1:48 scale gives the F-15C enough visual presence for shelf display while still fitting comfortably into a focused build session. Recommended age: 14 years and up.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri F-15E Strike Eagle Model Kit 1:72

€21.99

The Italeri F-15E Strike Eagle model kit brings a late-Cold War and post-Cold War combat aircraft into 1:72 scale with the compact footprint and visual presence that suit aircraft displays. As a detailed plastic kit, it focuses on the two-seat strike version of the Eagle, a jet shaped for all-weather fighter-bomber duties and recognised by its broad stance, twin tail fins and mid-wing layout. The subject traces back to a McDonnell Douglas design programme begun in the 1970s for United States Air Force fighter squadrons, with the F-15E entering service in the late 1980s as a replacement for the F-111. Its operational profile covered ground attack, bombing and interdiction missions, and the tandem cockpit placed a Weapon Systems Officer in the rear seat for route management, target tracking and electronic countermeasures. Those role-specific details give the finished model more than a familiar outline, connecting the airframe to a defined mission type within modern military aviation. On the bench, the 1:72 format keeps the build manageable while still presenting the distinctive proportions of the Strike Eagle. Once assembled, the model sits naturally among modern jet subjects and brings clear historical reference to collections centred on USAF aircraft and late-20th-century air operations.

Military aeroplane models

Italeri F-16 C/D Night Falcon Model Kit 1:72

€16.99

Italeri F-16 C/D Night Falcon is a 1:72 aircraft model kit that captures the sharp lines of this multi-role fighter in a special night version. The finished model measures 21 cm in length, giving the swept wings, single-engine fuselage and tail surfaces enough scale presence to read clearly once assembled. The assembly kit is built around detailed airframe parts, including fuselage sections, cockpit components, landing gear and external stores mounted under the wings and fuselage. The instruction material shows alternative version choices for F-16 A/C and F-16 B/D layouts, with different cockpit arrangements and version-specific parts used during the build. Decals for 3 versions add serials, warning markings, insignia and squadron identifiers, so the final finish can move beyond a plain airframe into a more complete service look. The subject itself is presented as a Night Falcon variant, which gives the model a distinct identity within the wider F-16 family. With 600 minutes stated for assembly, this kit suits a slower, step-by-step build rhythm where painting, decal placement and final fitting each have room for attention. The 14 Years marking places it in the hobby model category, and the 1:72 scale works well for display alongside other military aircraft in the same scale.

Model tanks

Italeri F-16 C/D Night Falcon Model Set 1:72

€30.99

The Italeri F-16 C/D Night Falcon Model Set 1:72 brings a modern military jet into a compact scale build with a detailed assembly kit and a clearly defined aircraft subject. The F-16 design stands out through its frameless bubble canopy, side-mounted control stick and fly-by-wire concept, features that made the original aircraft one of the most recognisable multirole fighters of its era. Developed from a day fighter into an all-weather multirole aircraft, the F-16 combined manoeuvrability with broad operational flexibility, and that background gives this model a strong technical identity on the workbench. The full-size aircraft is equipped with a 20 mm M61 Vulcan internal cannon and can carry missiles and bombs on its hard points, details that shape the character of the finished replica. Reference markings shown for the Night Falcon schemes add another layer of realism, with unit codes, insignia and camouflage placement guiding the final look. Assembly is required, and the stated build time is 600 minutes. During the build, the 1:72 scale keeps the model manageable on a desk while still leaving room for careful finishing work on the fuselage, wings and tail. Once completed, the Night Falcon theme and military paint scheme give the aircraft a crisp display presence, whether placed in a collection cabinet or used as the centrepiece of an aircraft model lineup.

Military aeroplane models

Italeri F-16A Fighting Falcon Model Kit 1:48

€35.99

The Italeri 1:48 F-16A Fighting Falcon assembly kit captures one of the most recognizable modern fighter aircraft in a scale format that gives the finished model a length of 31.5 cm. The subject is the F-16A, a single-seat aircraft known for its frameless bubble canopy, side-mounted control stick and fly-by-wire control system, features that shaped its role as a highly agile multirole jet. This kit centers on the aircraft's distinctive layout and mission equipment. The F-16A airframe combines a compact fuselage, swept wings and underwing hard points that can carry a wide range of external stores, reflected here through the included assembly parts for the build. The original aircraft also carries a 20 mm M61 Vulcan internal cannon and modern avionics, details that place the model firmly in the context of late 20th century military aviation. A super decals sheet for 5 versions expands the finishing options with different unit markings and commemorative graphics, while the color instruction sheet supports accurate paint placement during the final stages. Across the workbench, the project moves through assembly, painting and decal application over 600 minutes, making it a substantial aircraft build for ages 14 years and up. On a shelf or in a display cabinet, the completed F-16A stands out through its familiar canopy line, slim nose and combat-ready wing layout.

Military aeroplane models

Italeri F-16C Fighting Falcon 1:48 Model Kit

€39.49

Italeri F-16C Fighting Falcon War Thunder brings one of the most recognizable modern combat aircraft into a 1:48 scale model kit with the sharp proportions, single-seat layout and clean fighter profile that define the original jet. The F-16 shape stands out through its frameless bubble canopy, a feature developed to give the pilot broad visibility, and that distinctive silhouette carries straight into the finished display model. The real aircraft was developed in the late 1970s as a day fighter for the United States Air Force before evolving into an all-weather multirole platform, and that background gives this subject a wide operational character. The F-16 is known for a side-mounted control stick, fly-by-wire control system and modern avionics, details that make it a landmark design in military aviation history. Armament on the full-size aircraft includes a 20 mm M61 Vulcan internal cannon, while hard points allow a broad weapons fit with missiles and bombs. This edition also adds new parts and a super decals sheet for 6 versions, opening up different liveries, unit markings and finishing choices during the build. On the bench, the decal options support aircraft from operators and units such as Ohio ANG, 64th AGRS and Pakistan Air Force, each with its own camouflage layout, tail markings and stencil pattern. The result is a build that rewards careful painting, decal placement and weathering, then settles into a display piece with a strong military aviation presence. Radio gear, a battery pack, a charger and paints are not part of this kit.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri F-35A Beast Mode Aircraft Kit 1:72

€34.99

Italeri F-35A Beast Mode brings the look of a fifth-generation multirole combat aircraft into a 1:72 aircraft kit with a strong focus on the CTOL version and its heavily armed configuration. The single-seat, single-engine jet is presented with trapezoidal wings, angular stealth shaping and the open internal weapons bay that defines the Beast Mode appearance in combination with external stores. This detailed assembly kit is built over 600 minutes and centers on the F-35A Lightning II in its conventional take off and landing form. The subject comes from the Joint Strike Fighter program and represents an aircraft developed for air superiority, close air support and ground attack missions. New parts are included for this configuration, and the super decals sheet covers 6 versions for varied finishing work. The airframe's advanced layout, from the canted tail fins to the compact fuselage lines, gives the completed model a crisp modern silhouette that stands apart in a military aviation collection. On the workbench, the 1:72 scale supports precise painting and measured decal application without demanding a large display footprint. Once completed, the model suits shelf display alongside other modern aircraft builds or a focused contemporary air power lineup, with the open bay and external weapons load giving the finished jet a more mission-configured stance.

Military aeroplane models

Italeri F-35A Lightning II 1:48 Aircraft Kit

€72.99

Italeri F-35A Lightning II (Beast Mode) presents the conventional takeoff and landing version of the Joint Strike Fighter as a 1:48 scale aircraft kit, translating the jet's angular silhouette into a detailed plastic build. The single-seat, single-engine layout and trapezoidal wing plan give the model the unmistakable outline associated with the F-35 family. The subject draws on a fifth-generation all-weather multirole combat aircraft developed to replace United States and NATO strike-fighters. In this version, the F-35A represents the CTOL configuration, distinct from the F-35B short takeoff and vertical landing variant and the F-35C carrier-based version with foldable wings. Stealth technology, advanced hi-tech materials and modern avionic systems define the full-scale aircraft and shape the character of the model. The Beast Mode designation adds another layer of interest by focusing attention on a heavily armed mission profile within the F-35A concept. On the workbench, the 1:48 scale gives the aircraft enough presence for the wing shape, fuselage lines and overall proportions to read clearly during assembly and once complete. Recommended from 14 years, the kit suits builders drawn to current military aviation subjects, whether the finished aircraft joins a modern air power collection or stands alone as a focused JSF build.

Military aeroplane models

Italeri F-35A Lightning II Model Kit 1:72

€28.99

Italeri F-35A Lightning II is a 1:72 scale assembly kit that brings the conventional takeoff and landing variant of this fifth-generation combat aircraft to the workbench. The finished model measures 21.4 cm and recreates the jet's low-profile silhouette, trapezoidal wings and single-engine configuration in a compact display format. The subject is drawn from the Joint Strike Fighter program, developed to create a multirole aircraft for air superiority, close air support and ground attack missions. This F-35A version represents the CTOL configuration, distinct from the short takeoff and vertical landing F-35B and the carrier-based F-35C with foldable wings. The kit uses detailed molded parts for the airframe and is paired with a color instruction sheet to support painting and marking placement. A super decals sheet provides markings for 5 versions, including airframe stencils, insignia and ordnance details that add a more technical finished look. Across a build time of 600 minutes, the project moves through assembly, painting and decal application into a finished aircraft suited to shelf display, diorama use or a modern military aviation collection. The compact 1:72 format also makes it practical for builders who enjoy comparing different aircraft types and variants within the same scale.

Model aircraft

Italeri F-35B Lightning II 1:48 Model Kit

€72.99

The Italeri F-35B Lightning II 1:48 model kit brings one of the defining combat aircraft concepts of 21st century military aviation into a detailed scale build. Its subject is the single-seat, single-engine F-35B, the STOVL variant developed within the Joint Strike Fighter program and shaped for multirole use in all-weather operations. The airframe is marked by trapezoidal wings, stealth-led lines and the compact proportions associated with the F-35 Lightning II. The real aircraft combines air superiority, close air support and ground attack roles, and this version focuses on the configuration created for short take off and vertical landing. That operating concept is tied to the Pratt & Whitney afterburning turbofan and the swivel nozzle that directs engine thrust, giving the F-35B its distinctive technical character. In 1:48 scale, those defining features translate into a build that centres on form, structure and the recognisable profile of the jet. The carrier-based context adds further depth, with the F-35B designed to operate from ships such as H.M.S. Queen Elizabeth and the Italian Navy flagship Cavour. The 14 years marking suits a project built around careful assembly, painting and display, whether the finished aircraft joins a modern aviation collection or stands alone as a contemporary military subject.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri F-35B Lightning II 1:72 Model Kit

€34.99

Italeri F-35B Lightning II 1:72 Model Kit brings the STOVL version of the Joint Strike Fighter into a compact aircraft build with a finished length of 21.7 cm. The single-seat, single-engine jet is shaped around the distinctive features of the F-35B configuration, including the lift-system layout and the surfaces associated with short take-off and vertical landing operations, giving the completed aircraft a recognisable modern carrier-borne silhouette. This detailed plastic kit is based on 100% new moulds and focuses on the angular fuselage, trapezoidal wings and stealth-driven form of the original aircraft. The decal sheet supports 3 versions, covering Royal Navy Lightning Force, U.S. Marine Corps VMFA-121 and Marina Militare markings, so the same airframe can be finished in different service identities. The included U.S. 'Beast mode' external armament set adds another display direction by fitting the aircraft with a heavier external weapons configuration. Assembly time is stated as 600 minutes. On the workbench, the combination of new mould tooling, multiple marking choices and the external stores set supports a build that can be approached as a clean flight deck aircraft or a more heavily armed operational machine. Once completed, the 1:72 scale makes the model easy to place in a display cabinet, on a desk or alongside other modern military aircraft in the same scale.

Military aeroplane models

Italeri F-35B Lightning II Model Kit 1:48

€76.99

Italeri F-35B Lightning II is a 1:48 aircraft model kit based on the STOVL version of the Joint Strike Fighter, the configuration developed for short take-off and vertical landing operations. The single-seat, single-engine layout and the aircraft's distinctive stealth shaping give the finished build a crisp modern silhouette suited to carrier-deck display scenes. This assembly kit focuses on the details that define the F-35B configuration. The airframe reflects the trapezoidal wing design and the advanced multirole fighter concept behind the original aircraft. A photo-etched fret is included for finer metal parts, adding extra definition where thinner scale components matter. The decal sheet supports 6 versions with a wide range of maintenance stencils, warning markings, insignia and unit graphics, allowing the surface finish to carry the dense visual language seen on operational aircraft. Included external stores broaden the display options, and the set also contains the U.S. version 'Beast mode' loadout as well as 2 weapons trolleys to extend the scene beyond the aircraft itself. With 600 minutes assembly time, the build suits model makers who enjoy a longer bench session with painting, marking and final presentation as distinct stages. Paints, cement and tools are required separately. Once completed, the model fits naturally into modern military aviation collections, carrier-deck dioramas or shelf displays centered on 21st century combat aircraft.

Military aeroplane models

Italeri F-35C Lightning II Aircraft Kit 1:72

€41.99

Italeri 1:72 F-35C Lightning II brings the carrier-based Joint Strike Fighter into a detailed aircraft build shaped around the naval CATOBAR variant. The single-seat airframe combines stealth-driven lines with a trapezoidal wing plan, creating the distinctive silhouette of the F-35 family in a compact display scale. This plastic assembly kit focuses on the features that set the F-35C apart from the F-35A and F-35B. Folded wingtips reflect shipboard storage needs, while the rear arrestor hook and reinforced frontal gear match carrier launch and recovery equipment used on U.S. Navy aircraft carriers. The airframe can be built in different setups, and the kit adds parts for a 'beast mode' configuration with external stores. A super decals sheet provides markings for 4 versions, and the included mask stickers support sharper work on clear sections during painting. Assembly kit contents are included. Paints, cement and tools are required separately. Across the workbench, the 1:72 scale keeps the project manageable while still leaving room for naval aircraft details and loadout choices. Once completed, the model suits shelf display, aviation collections or a carrier-deck themed lineup with other modern military aircraft. The 14 Years marking and 600-minute assembly time place the focus on a more involved model-building session with finishing, marking and configuration decisions along the way.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri F-4 C/D/J Phantom Aces Model Kit 1:72

€27.99

Italeri F-4 C/D/J Phantom Aces brings the shape of the Phantom II into a 1:72 scale model kit with a finished length of 26.7 cm and markings drawn from Vietnam-era U.S.A.F. and U.S. Navy aircraft. The assembly kit centers on the aircraft's long fuselage, swept wings and external stores, creating a build that carries the unmistakable profile of one of the period's best-known jets. The detailed plastic kit is supplied unassembled and is intended for a full model-building process with an indicated assembly time of 600 minutes. That longer build window suits careful work on alignment, surface preparation and paint application across the different F-4 C, D and J configurations named in the set. Decal and livery references connect the model to ace pilots including Jeffrey S. Feinstein, Charles Barbin 'Chuck' DeBellevue, Richard Stephen 'Steve' Ritchie and Robin Olds. The subject matter adds historical depth beyond a single airframe by linking the finished aircraft to specific combat-marked versions. On the bench, the kit lends itself to measured assembly sessions, detail painting and decal placement across the airframe and external tanks. Once completed, the 1:72 format fits naturally into aircraft collections, display cabinets and Vietnam War aviation lineups while still offering enough surface area for markings to stand out clearly.

Military aeroplane models

Italeri F-5A Freedom Fighter Aircraft Kit 1:72

€22.99

The Italeri 1:72 US F-5A Freedom Fighter brings a classic Cold War jet into a compact aircraft kit with a crisp silhouette, swept wings and the lean proportions that made the original Northrop design so distinctive in service. Fine molded surface detail and the small overall footprint suit a display shelf while still leaving room for careful finishing work across the fuselage, wings and tail. This assembly kit is designed for builders aged 14 years and over and has a stated assembly time of 600 minutes. The subject reflects the early F-5A configuration, a light single-seat fighter powered on the real aircraft by 2 General Electric J85-GE-13 engines and armed with 2 nose-mounted 20 mm guns. The kit also supports multiple finishing paths through a decal sheet with markings for 6 versions, covering aircraft from the Netherlands, Norway, Spain, South Vietnam, Canada and Venezuela. Instruction diagrams shown in the set outline cockpit assembly, rear fuselage construction, external stores placement and an alternative open-canopy display. On the bench, that mix of compact scale, variant choice and detailed markings creates a focused build with plenty of visual contrast between camouflage layouts, anniversary striping and national insignia. Once completed, the model suits display with the canopy closed or open, and the different livery options allow one airframe to be finished as a demonstration jet, operational fighter or commemorative aircraft. Paints, cement and tools are required separately.

Military aeroplane models

Italeri F-84G Thunderjet Model Kit 1:72

€21.99

The Italeri F-84G Thunderjet model kit in 1:72 brings one of the defining early jet fighter-bombers of the postwar era onto the workbench. Developed by Republic for the USAF, the F-84 used a simple yet effective aerodynamic layout with a large circular front air intake, straight wings and tricycle landing gear, creating a silhouette that stands apart from later swept-wing jets. The F-84G entered production in 1951 as one of the final versions of the Thunderjet line. Power in the original aircraft came from a General Electric/Allison J35 engine, enabling speeds of up to 1,000 km/h. Beyond USAF service, the type was operated by many NATO countries through the Mutual Defense Assistance program, and from 1952 it equipped several fighter units of the Italian Air Force. That operational background gives the finished aircraft a strong historical setting, whether the focus is on early NATO aviation, USAF subjects or Italian postwar markings. The full-scale aircraft carried six 12.7 mm machine guns and an offensive load of nearly 900 kg, underlining its role as a jet-powered fighter-bomber rather than a pure interceptor. With age 14+ stated for the kit, the subject suits builders looking for a compact military aircraft with clear historical identity and recognisable engineering features for display after assembly.

Military aeroplane models

Italeri F-86E Sabre Aircraft Model Kit 1:48

€31.99

Italeri F-86E Sabre brings a landmark post-war jet fighter into 1:48 scale with a finished model length of 23.8 cm. The swept-wing layout, large front air intake and single-engine configuration give the aircraft its unmistakable silhouette, whether the completed build is placed in a cabinet or set alongside other military aviation subjects. This assembly kit focuses on the character of the North American-designed Sabre, an aircraft that became closely linked with early jet combat and Korean War history. The General-Electric J47 engine is part of that original aircraft story, and the model reflects the clean fuselage lines and wing form that defined the type. Super decals for 4 versions open up different marking directions, while the colour instruction sheet supports accurate placement and paint planning during the finishing stages. With a stated assembly time of 600 minutes, the project suits builders who enjoy a longer, detail-led process rather than a quick session. On the workbench, the 1:48 scale gives enough surface area for careful painting, decal application and small finishing touches to stand out. Once completed, the F-86E Sabre fits naturally into historic aircraft collections, Cold War displays or line-ups centred on classic jet development.

Military aeroplane models

Italeri F-8E Crusader Aircraft Model Kit 1:72

€24.99

Italeri F-8E Crusader is a 1:72 aircraft model kit that captures the lean profile of the carrier-based fighter known as "The last of the Gunfighters". The finished build reflects the distinctive layout of the original Vought design, including the large front air intake, swept wings and naval jet silhouette that made the Crusader a standout on carrier decks. The full-size F-8 was the first carrier-based fighter from the 1950s to reach supersonic performance, powered by a Pratt & Whitney turbojet engine with afterburner and capable of exceeding Mach 1.8. Italeri builds this historic subject around the F-8E version, the long-serving variant used by U.S. Navy and U.S. Marine Corps squadrons and deployed into the Vietnam War period. The aircraft's armament history also shapes the character of the model, with the real machine carrying four 20 mm guns beside the intake and a varied weapons load of air-to-air missiles, rockets and bombs. A super decals sheet for 6 versions expands the finishing options with squadron markings and service stencils drawn from naval and marine use. Across the workbench, the 600 minute assembly time supports a more involved build with painting and marking stages that bring out the Crusader's operational look. Once completed, the 1:72 scale format suits shelf display, aviation collections or a line-up with other Cold War aircraft while keeping the focus on the jet's sharp nose, intake markings and carrier fighter stance.

Military aeroplane models

Italeri F/A-18F U.S. Navy Special Colors Kit

€44.99

Italeri F/A-18F U.S. Navy Special Colors brings the lines of the carrier-based Boeing fighter into a 1:48 assembly kit with a strong focus on squadron markings and surface detail. The finished model captures the larger Super Hornet airframe with its twin-engine layout, revised wing shape, engine intake ramps and enhanced tail design, giving the aircraft a purposeful presence on the bench and in a display setting. The kit is built from molded parts that form the fuselage, wings, cockpit, landing gear and external stores, with decor elements used to place unit insignia, serials, warning stencils and cockpit details. Marking references in the set cover aircraft such as VFA-41 Black Aces, VFA-94 Mighty Shrikes, the U.S. Navy Strike Tactics Instructor Program aircraft from NAS Fallon, and VFA-11 Red Rippers. An alternative canopy arrangement is shown in the instructions, and the build also allows preparation for a ladder option through an indicated hole-opening step. Assembly time is stated as 600 minutes. Glue, paints and tools are required separately. This model suits long, concentrated building sessions where painting, decal placement and subassembly work shape the final result step by step. Once completed, the 1:48 scale format gives the special color schemes, tail art and underwing loadout details enough space to stand out clearly.

Model car kit

Italeri Fiat 500 Abarth 2008 Model Kit 1:24

€36.99

The Italeri Fiat 500 Abarth 2008 model kit brings a modern small performance car into 1:24 scale, translating the shape of the Fiat Group successor introduced in 2007 into a detailed build. Its design draws directly on the classic Fiat 500 first launched in 1957, then sharpens that familiar outline with the more aggressive character of the Abarth version. The body styling is defined by concrete Abarth cues named in the source design: air intakes, side skirts and larger bumpers. Those elements change the visual balance of the compact car, giving the shell a lower, more purposeful stance than the standard Fiat 500. The full-size car also introduced mechanical changes such as a turbocharged engine, sporty exhausts and lowered suspension, and that background gives the finished model its distinct identity within modern Italian road-car history. With MinimumAge marked at 14 Years, the kit is positioned for builders ready for a more detailed assembly project. On the bench, the 1:24 format offers enough presence to show the proportions clearly while remaining manageable for painting and display. Once completed, the compact dimensions of the original design make the model easy to place in a collection of modern road cars, Italian vehicles or Abarth-themed builds.

Military aeroplane models

Italeri FIAT CR.42 CN Falco Night Fighter 1:72

€16.79

The Italeri FIAT CR.42 CN Falco Night Fighter in 1:72 scale captures one of the last operational biplane fighters of the late 1930s in a compact aircraft model kit with a strong historical profile. The subject combines the familiar fixed landing gear and open cockpit layout of the C.R. 32 lineage with the dedicated CN night fighter configuration, giving the finished aircraft a distinct silhouette on the display shelf. The original C.R. 42 introduced an aluminum and steel structure covered with metal and fabric, and that mixed construction gives this aircraft its characteristic surface contrast. Power came from the Fiat A.74 air-cooled radial engine, which pushed the full-size fighter to 400 km/h and shaped the compact nose profile seen on the model. Italeri also marks this release with new parts, focusing the build on the Night Fighter version with its extended exhausts, a feature developed to reduce visibility during nighttime operations. The set also provides a super decals sheet for 5 versions, opening several marking directions for the same airframe. On the bench, the biplane layout, radial engine front and period undercarriage create a build with plenty of classic aviation character in a manageable 1:72 format. Once finished, the model suits historical aircraft collections, WWII aviation displays and diorama scenes centered on night interception or Regia Aeronautica subjects.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri FIAT CR.42 Falco 1:48 Fighter Kit

€30.99

The Italeri FIAT CR.42 Falco 1:48 Fighter Kit captures one of the last operational biplane fighters in a format that puts its structure and period character at the center of the build. Fixed landing gear, an open cockpit and the compact radial-engine nose give the aircraft its unmistakable outline, while the 1:48 scale leaves room for crisp surface detail across wings, fuselage and tail. This plastic kit is based on the assault and night fighter version of the FIAT CR.42 Falco and reflects the mixed construction of the original aircraft, which combined aluminum and steel structure with metal and fabric covering. The real aircraft used the Fiat A.74 air-cooled radial engine and reached 400 km/h, a figure that helps place the model in the final phase of biplane fighter development. Inside the box, the sprues provide the main airframe components, struts, landing gear parts, engine sections and external stores for a build with clear mechanical character. A super decals sheet for 4 versions adds squadron insignia, codes and stencil markings for different historical finishes. On the workbench, the wing struts, wheel fairings and cockpit area create a build with distinct stages and visible progress. Once painted and marked, the completed aircraft suits a display shelf, a historical aviation collection or a line-up of World War II fighters with contrasting monoplane and biplane forms.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri Fiat CR.42 Falco Aircraft Kit 1:72

€17.99

The Italeri Fiat CR.42 Falco brings a late-1930s Italian fighter into 1:72 scale with the unmistakable layout of a single-seat biplane. Fixed landing gear, an open cockpit and the compact 11.5 cm finished size give the aircraft a clear period character that stands out in a display of historic aviation subjects. The original Fiat C.R. 42 was developed from the earlier C.R. 32 and combined traditional biplane configuration with newer structural solutions, including an alloy and steel frame covered with canvas and metal panelling. Italeri translates that aircraft into a detailed plastic kit that invites careful assembly and finishing. The subject is tied to the Battle of Britain period, when Fiat C.R. 42 aircraft served with the Italian Regia Aeronautica within the Corpo Aereo Italiano. A supercharged air-cooled Fiat A.74 radial engine powered the full-size aircraft to 400 km/h, while its manoeuvrability made it well regarded by Italian pilots. The super decals sheet opens 6 marking versions, so the finished model can be approached as a specific historical aircraft rather than a generic biplane. With a stated assembly time of 600 minutes and an age marking of 14 years and up, the build suits modellers who enjoy painting camouflage, placing unit insignia and refining small details across wings, fuselage and tail.  Warning! Not suitable for children under 14 years.

Model car kit

Italeri FIAT Mefistofele 1:12 Model Kit 1923-25

€189.99

The Italeri FIAT Mefistofele 21706c.c. 1923-25 brings one of motor racing's most extreme machines into 1:12 scale, with a finished model length of 45 cm that gives the car's stretched proportions and towering bodywork real presence on the shelf. Based on upgraded Protar moulds, this assembly kit focuses on the distinctive engineering of the record car known as Mefistofele. Its design reflects the original machine built around the old Fiat SB4 chassis and the huge Fiat A-12 liquid-cooled aircraft engine with over 20,000 cm3 capacity. The bodywork rises high to house that engine, and the model translates those unusual proportions into a build that stands apart from later Grand Prix cars. More than 500 parts create room for mechanical depth across the chassis and engine area, while the opening bonnet lets the internal detail stay visible after assembly. Working steering adds another authentic function to the finished car. The historic background gives the model extra character: on 12 July 1924 at Arpajon, Ernest Eldridge drove the original car to 146.01 mph, over 230 km/h, to set the World Land Speed Record. That story carries into the finished replica, whether displayed with the bonnet raised to show the engine detail or set in a clean side profile that highlights the long red body, spoked wheels and bold FIAT markings. Assembly time is stated as 600 minutes. Paints are required separately.

Military figures & accessories

Italeri Field Tool Shop Model Kit 1:35 Scale

€9.49

Italeri Field Tool Shop brings a 1:35 scale maintenance area into a model scene with a broad selection of workshop accessories and service equipment. The assembly kit is built around the look of a field repair station, where lifting gear, hand tools and storage pieces turn open ground or a vehicle bay into a convincing working environment. The set uses unassembled parts on sprues and covers several distinct equipment types for diorama building. Visible components include a gantry crane marked 2 t with a hanging hoist, an anvil on a stump, a wheeled air compressor, gas cylinders, a twin-cylinder trolley, a workbench, a vise, barrels, crates, a toolbox and a ladder. Smaller accessories such as shovels, pickaxes, hammers, wrenches, hooks and jack-like lifting tools help fill benches, walls and floor space with scale detail. The mix of larger structures and fine workshop pieces supports layered layouts, from compact repair corners to busier maintenance yards. With 600 minutes of assembly time, the build suits model makers who want to spend time arranging and finishing a service scene around vehicles, figures or depot settings. The 1:35 scale format fits naturally into military and industrial dioramas, where compressors, cylinders and lifting frames can be positioned to suggest ongoing repair, loading or mechanical work.

Model brushes

Italeri Flat Brush 0 Synthetic Hobby Brush

€1.39

Italeri Flat Brush 0 Synthetic is a fine hobby brush built for controlled detail painting, with a slim shape, synthetic bristles and a long handle that supports careful movement across small painted areas. The size 0 format suits narrow edges, tight sections and precise touch-up work where measured paint placement matters more than broad coverage. The synthetic bristle head is paired with a metal ferrule and a dark blue handle, creating a clean, workshop-ready layout for model and craft benches. In use, the flat profile can help define straight edges, pick out small surface sections and apply paint in short, deliberate strokes. The narrow brush head also suits tasks that call for restraint, such as adding fine colour accents, refining borders or working around neighbouring painted details. Assembly kit is listed in the included components, and the product data states an assembly time of 600 minutes. On a model painting table, this brush fits naturally beside paints, palettes and small parts when careful finishing work begins. It also suits creative sessions focused on detail layers, edge definition and other close-control brush tasks where a compact size 0 brush earns its place.

Model brushes

Italeri Flat Brush 00 Synthetic Paint Brush

€1.19

Italeri Flat Brush 00 Synthetic is a fine paint brush built for detailed hobby work, with a size 00 flat tip that supports careful colour placement on small model sections and narrow painted areas. The synthetic bristles, silver ferrule and long dark blue handle create a focused tool for steady hand movement at the workbench. The flat profile gives a different painting action from a pointed detail brush, making it useful for edging, short straight strokes and measured coverage across tiny raised or recessed parts. The slim handle helps keep the grip light during slow, deliberate brushwork, while the small head keeps the painted area easy to read as colour is applied. A synthetic bristle tip also suits repeated detail sessions where consistent shape and controlled pickup matter across fine finishing steps. On scale models, miniatures and craft projects, this brush fits the moments where broad coverage is too much and a careful pass is needed instead. It can be used for trim lines, cockpit details, panel accents, touch-up work and other small finishing tasks that benefit from a compact flat brush rather than a wider head.

Model brushes

Italeri Flat Brush 1 Synthetic Hobby Brush

€1.59

Italeri Flat Brush 1 Synthetic is a hobby brush made for controlled painting on small model surfaces. The flat synthetic bristle shape supports measured paint pickup and guided application, which helps when working along edges, corners and narrow sections that call for a steady hand. In the close-up working range typical of scale modelling, that compact profile gives clear control over where the paint goes and how sharply a painted area is defined. The brush combines a slim handle, a metal ferrule and a fine flat tip suited to detail-focused finishing work. Short strokes can be placed with care on trim lines, panel borders and small colour sections, while the flat edge helps keep coverage even across tight areas. Synthetic bristles are a common choice for hobby painting where consistent shape and clean handling matter during repeated sessions at the workbench. Assembly is required, with an assembly time of 600 minutes. This format fits painting stages such as adding small colour blocks, refining borders after a base coat, or working on compact parts where a broader brush would be less exact. It also suits craft and miniature tasks that rely on neat edges and deliberate brush control rather than wide-area coverage.

Model brushes

Italeri Flat Brush 2 Synthetic Paint Brush

€1.69

Italeri Flat Brush 2 Synthetic brings a precise flat brush format to model and hobby painting, combining synthetic bristles, a slim handle and a metal ferrule in a tool shaped for controlled work on small areas. The narrow brush head supports careful paint placement along edges, defined sections and fine surface details where a broader brush would be less exact. The flat profile changes how paint is applied: the bristle edge can guide short, straight strokes, while the wider face can spread colour across compact panels and narrow bands. Synthetic bristles give the brush a consistent working shape for repeated detail sessions, and the long handle supports a steady grip during slow, deliberate finishing steps. The dark blue handle and silver ferrule create a clean workshop look that matches the focused character of scale-model painting. Assembly is required, with a stated assembly time of 600 minutes. On a hobby bench, this brush fits naturally into painting stages such as edging, touch-up work and filling smaller sections after main colours are laid down. It also suits craft use where controlled brush width matters, especially when working on neat borders, compact motifs or carefully separated colour areas.

Model brushes

Italeri Flat Brush 3 Synthetic Hobby Brush

€1.79

Italeri Flat Brush 3 Synthetic is a hobby brush built for controlled painting work on models and other detailed creative projects. The size 3 format combines a narrow flat tip with synthetic bristles, making it suited to smooth coverage on small sections, straight edges and carefully defined painted areas. In the studio image, the slim blue handle, silver ferrule and short yellow bristles point to a brush shaped for measured, accurate strokes rather than broad coverage. The flat profile helps place paint evenly across raised details, trim sections and compact surface areas where a round tip would create a different edge. Synthetic bristles are a practical choice for hobby painting because they hold their shape consistently and support repeatable results across fine finishing steps. The long handle adds reach and control during bench work, while the metal ferrule secures the bristle head at the point where pressure and direction matter most. Assembly kit is listed in the included components. The stated assembly time is 600 minutes. This brush fits naturally into model painting sessions that move between base coverage, edge work and small corrections on visible parts. It also suits craft tables where careful paint placement matters more than wide-area filling, especially on compact shapes, corners and narrow sections. Age marking: 14 Years.

Model brushes

Italeri Flat Brush 4 Synthetic Paintbrush

€1.99

Italeri Flat Brush 4 Synthetic is a slim hobby paintbrush built for controlled brushwork on models and other detailed creative tasks. The size 4 format, flat bristle shape, light-blue handle, silver metal ferrule, and short yellow bristles create a clear setup for measured paint application, crisp edges, and careful coverage on small sections. The synthetic bristles support repeatable strokes where narrow panels, trim lines, and raised details need more definition than a broader brush can give. Its flat tip suits edging, filling small rectangular areas, and guiding paint into tidy bands rather than loose rounded marks. The long handle adds reach between hand and painted surface, which can help when working around fresh paint or confined model sections. The metal ferrule secures the bristle head and gives the brush a clean transition from handle to tip for steady placement. Within model making, this brush fits naturally into painting sessions that focus on detail parts, touch-ups, and finishing passes after main colour areas are complete. The data lists an assembly kit format, a 14 Years age marking, and an assembly time of 600 minutes, placing it in a hobby context shaped by patient, precise work rather than quick craft use.

Model brushes

Italeri Flat Brush 6 Synthetic Hobby Brush

€2.29

Italeri Flat Brush 6 Synthetic is a hobby brush built for controlled paint application on models, crafts and other detailed creative work. The flat bristle profile supports even coverage across small surfaces, while the synthetic bristles and slim handle create a precise, steady painting tool for careful bench sessions. The close, flat tip helps guide paint along edges, trim sections and compact panels where a round brush can place less defined coverage. A silver ferrule secures the bristle head to the long tapered handle, giving the brush a clear transition point that helps with grip and directional control during slower, more exact strokes. The short bristle length suits measured paint placement rather than broad sweeping coverage, which makes this format useful for touch-ups, defined borders and neat layer work on scale builds. On the workbench, the brush fits naturally into model finishing routines, from painting smaller sections to refining straight lines and surface details. Minimum age is 14 Years. Assembly is required, and the stated assembly time is 600 minutes.

Model brushes

Italeri Flat Brush 8 Synthetic Hobby Brush

€2.89

Italeri Flat Brush 8 Synthetic is a hobby brush shaped for controlled paint application in model-making and other careful finishing work. The flat yellow bristle head, silver ferrule and light blue tapered handle create a compact tool that suits both defined edges and broader painted sections, with the flat tip helping guide straight, even coverage across small surfaces. The synthetic bristles support consistent paint pickup and release, which is useful when working through trim, touch-ups or neat colour blocks on detailed builds. Its short brush head keeps the working end close to the surface, making small corrections easier to judge while painting. The metal ferrule holds the bristle shape in place and connects it firmly to the handle, while the slim handle profile supports a steady grip during slower, more deliberate brush movement. Assembly is stated at 600 minutes. The age marking is 14 Years. On a workbench, this brush fits naturally into painting stages that call for crisp edges, filled panels or careful finishing passes. It can move from base coating small sections to refining visible details, giving model builders a straightforward tool for controlled hand painting.

Model car kit

Italeri Ford Escort Mk.II Model Kit 1:24

€36.99

The Italeri Ford Escort Mk.II model kit in 1:24 scale brings a key car of 1970s rally history to the workbench in a finished length of 16.7 cm. Its squared body design reflects the second-generation Escort launched in 1975, giving the build a distinct period character that reads clearly from the first test fit to the final painted shell. This kit focuses on the Ford Escort Mk.II as a detailed plastic build, making the shaping, finishing and painting stages part of the appeal. The source vehicle evolved from the Escort Mk 1 while retaining proven mechanical foundations, and that heritage gives the replica a strong mix of familiar compact proportions and sharper 1970s styling. The Escort line covered 3 body styles and 5 engine types in full-scale production, adding useful context to the model's place in the wider range. Alongside standard road versions, Ford also developed sport-focused variants, including the RS 1800 created for World Rally Championship competition. With an assembly time of 600 minutes, this kit suits builders who enjoy a longer project with room for careful paint application and motorsport-inspired finishing. Paints are required separately. Once completed, the 16.7 cm model fits naturally into a display of classic road and rally cars while also offering a satisfying build centered on one of Ford's best-known compact performance shapes.

Model car kit

Italeri Ford Escort RS 1800 Mk.II 1:24 Kit

€36.99

The Italeri Ford Escort RS 1800 MK.II Lombard brings a landmark rally car into 1:24 scale with the crisp, angular shape that defined the second-generation Escort. At 16.7 cm long when completed, the model gives the compact competition car enough presence for a shelf, cabinet or motorsport-themed display while keeping the proportions of the original RS 1800 clear. This assembly kit is based on the Ford Escort Mk 2 introduced in 1975, a major evolution of the earlier Escort formula with updated squared styling and the proven mechanical foundation carried over from the Mk 1. Within that line-up, the RS 1800 was the dedicated version developed for rally competition, and the Lombard theme connects the build to the RAC Rally years that shaped the car's reputation. The extra catalogue super decals sheet expands the finishing stage with event markings, sponsor graphics and period-specific visual details that help define the competition look. With a stated assembly time of 600 minutes, the build offers room for careful preparation, painting and decal work across the body and trim. The finished replica suits display alongside other 1:24 motorsport subjects, and it also fits naturally into a focused rally collection built around historic championship cars from the 1970s and early 1980s.

Model car kit

Italeri Ford Transit 1:24 Detailed Model Kit

€36.99

The Italeri Ford Transit 1:24 model kit turns a landmark European light commercial vehicle into a detailed scale build with a strong period identity. Based on the Second Series introduced in 1965, the van brings together the proportions and working layout that made the Transit a familiar sight in everyday transport, from urban deliveries to trade use. The full-size vehicle was defined by a front-mounted engine, a wide track and a low loading floor, and those core features shape the character of this kit. In 1:24 scale, the body captures the practical stance of the Transit line while the build process focuses attention on its commercial design rather than on racing or off-road styling. The subject also carries unusual brand history: Italeri used Ford Transit vehicles to deliver its own scale model kits, linking this release to the company's real transport story as well as to the vehicle itself. The detailed plastic construction gives model builders a solid base for painting and finishing work. On the bench, the kit suits careful assembly sessions where body shape, period proportions and van layout matter as much as the finished display. Once completed, the Ford Transit fits naturally into collections centered on classic European utility vehicles, 1960s road scenes or commercial transport subjects. Age recommendation: 14 Years.  Warning! Not suitable for children under 14 years.

Model trucks

Italeri Freightliner FLC 1:24 Truck Model Kit

€59.99

The Italeri Freightliner FLC 1:24 Truck Model Kit brings a classic US long-distance tractor into a detailed scale build, shaped around the Conventional FLC 12064T. At 32.5 cm long when completed, the model has the stretched stance of a highway hauler, with the cab, chassis and sleeper laid out in the proportions that define this Freightliner design. The subject is specified with a 475 HP Cummins diesel engine and a 13 speed Fuller Roadranger transmission, giving the replica a clear technical identity rather than a generic truck outline. The build develops through separate chassis rails, suspension and axle sections, engine and pipework assemblies, interior cab parts, and the sleeper module mounted behind the cab. Interior details such as seats, steering wheel and dashboard are part of the construction, while exterior parts add mirrors, roof lights, bumper elements, vertical side equipment and the conventional front end. The decal sheet contributes grille emblems, stripe graphics, dashboard markings and transport lettering for a more finished road-truck appearance. With 600 minutes assembly time, this kit suits a slower bench session where the frame, cab and sleeper come together step by step. Paints, cement and tools are required separately.

Military figures & accessories

Italeri French Infantry 1798-1805 Model Kit

€10.49

Italeri French Infantry 1798-1805 is a 1:72 scale model kit centred on one of the defining troop types of the Napoleonic Wars. The set draws on the French infantrymen who carried the military operations of the Consulate and the early Empire, bringing post-revolutionary uniform and field equipment into a compact historical build with a strong period identity. The subject matter places the figures in the years when French forces were decisive at Marengo in 1800 and Austerlitz in 1805, giving the finished scene a precise historical frame rather than a generic military theme. The infantry are represented with the Charleville 1777 muzzle-loaded musket, a weapon that helps anchor the set in its era and supports more accurate painting and diorama planning. Young officers with strong confidence in Napoleon are part of the historical context behind the set, which helps shape command scenes, marching formations and battlefield arrangements. On a shelf, in a diorama or across a war gaming layout, the 1:72 scale keeps the set easy to combine with other period miniatures and terrain. The finished figures suit collectors who want a French Napoleonic unit with a clearly defined 1798-1805 timeframe and a visual link to the campaigns that established the early Empire.  Warning! Not suitable for children under 14 years.

Model figures

Italeri French Line/Guard Artillery Model Kit

€10.99

Italeri French Line/Guard Artillery brings a Napoleonic artillery unit into 1:72 scale with a build centered on field guns, mounted transport and a full crew. The set combines 2 cannons, 1 waggon, 8 horses and 11 figures, creating the structure for a battlefield scene that shows both firing action and movement across the field. The subject draws on French Line and Guard artillery, with uniforms that reflect horse artillery dress and the characteristic skin cap noted for the gunners. The artillery drivers are represented separately, adding another visual layer to the formation around the guns and transport. The guns are based on the Gribeuval system, a defining artillery pattern of the period, which gives the set a clear historical anchor beyond generic military styling. With 600 minutes of assembly time, the build suits a slower modelling pace where the arrangement of crew, horses and ordnance becomes part of the finished composition. On a shelf, in a cabinet or as part of a wider Napoleonic diorama, the 1:72 scale makes the set easy to combine with other period scenes. Ages 14 Years and up marks the recommended age, and the finished layout can be staged around a firing position, a moving gun team or a prepared artillery line.

Military aeroplane models

Italeri Fw 190 A-8/F Aces Model Kit 1:72

€17.49

Italeri Fw 190 A-8/F Aces is a 1:72 aircraft model kit centered on one of the most recognized Luftwaffe fighters of the Second World War. The compact scale brings the Focke-Wulf silhouette onto the workbench with a clear historical identity, making the finished aircraft easy to place in a display of wartime aviation subjects. The source aircraft entered production in 1944 as the A-8 version and used a BMW 801 D-2 twin-row 14-cylinder radial engine rated at 1,700 hp. For short periods, the injection system could raise output to over 1,900 hp, while maximum speed reached 653 km/h. The airframe was armed with 2 MG 131 machine guns and 4 20 mm MG 151 cannons, details that define the character of the variant represented here. More than 20,000 Fw 190 aircraft were produced from 1941 onward, placing this version within one of the major fighter families of the war. On the bench, that combination of scale, variant identity and technical specification supports a build that rewards careful painting and period-correct finishing. Once assembled, the model sits naturally alongside other 1:72 aircraft subjects, whether arranged as a single display piece or as part of a broader Second World War lineup.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri FW 190 D-9 Aircraft Model Kit 1:72

€15.99

Italeri FW 190 D-9 brings the final long-nose development of the Focke-Wulf fighter into 1:72 scale as a detailed aircraft model kit. The elongated front section reflects the redesign made for the Junkers Jumo 213 12-cylinder engine, giving the finished build the unmistakable Dora profile on the workbench or in a display lineup. The subject draws on one of the most recognized Luftwaffe fighters of World War II, with the D-9 representing a later evolution of the original Fw 190 airframe. More than 20,000 Focke-Wulf fighters were produced from 1941 onward, and this version shows how the established aerodynamic layout was adapted for a different powerplant. The new decals edition supplies markings for 6 versions, supporting different camouflage and identification finishes from 1945. Figure not included. During assembly, the model invites close attention to paint placement, national insignia and unit markings, especially across the nose, fuselage and tail sections shown in the finishing references. On a shelf, in a cabinet or alongside other 1:72 aircraft, the FW 190 D-9 stands out through its stretched nose, late-war camouflage patterns and historically grounded marking choices.  Warning! Not suitable for children under 14 years.

Military figures & accessories

Italeri German Paratroopers Model Kit 1:72

€13.99

Italeri German Paratroopers brings a WWII figure subject into 1:72 scale with tropical uniform details that suit dry-terrain dioramas, defensive positions, and infantry-focused display scenes. The assembly kit centers on German paratrooper figures and uses unassembled parts to let each pose take shape through building, finishing, and placement. The set is presented on 3 sprues, a format that helps organize the figures and smaller accessories during preparation and painting. Different soldier poses create scope for varied scene composition, whether the layout calls for advancing infantry, observation roles, or dug-in battlefield positions. Uniform and field gear details support a historical look that works well with rocky ground, trench sections, stone walls, and other WWII scenery elements. The stated assembly time is 600 minutes, giving the build a measured pace for trimming parts, refining joins, and planning paintwork across the full group. The included component is an assembly kit, and the age marking is 14 Years. On a workbench, the 1:72 format keeps the figures manageable for batch painting while still leaving room to pick out helmets, packs, weapons, and straps. In a finished display, the tropical uniform theme pairs naturally with desert and Mediterranean settings, where the group can anchor a larger historical scene or add infantry detail to an existing military collection.

Model tanks

Italeri German Truck 3to. TYPE S Model 1:35

€26.99

Italeri German Truck 3to. TYPE S brings a 1938 standardised transport vehicle into 1:35 scale as an assembly kit with a finished length of 17.1 cm. The shape of the cab, the cargo bed with side panels and the covered rear load area give the model the look of a working truck built for practical hauling duties in a military context. The subject is tied to the designation LKW 3,6-36 S 3t Blitz used by the Wehrmacht, reflecting the wider move toward unified civil transport designs that could be converted for military use. That background gives the build a specific historical frame rather than a generic truck theme. The model centres on the vehicle itself, making it suitable for display on its own or as part of a period diorama with roads, depots or field transport scenes. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the 1:35 format supports careful painting, weathering and finishing work across the cab, chassis area and rear body sections. Once completed, the 17.1 cm truck fits naturally into historic vehicle collections and scale scenes where cargo transport, logistics and support vehicles define the atmosphere. Paints and tools are required separately.

Military aeroplane models

Italeri Grumman Hellcat F6 F-3 Model Kit 1:72

€17.49

The Italeri Grumman Hellcat F6 F-3 model kit in 1:72 scale recreates the U.S. Navy carrier-based fighter that entered service in 1943 and became a major force in the Pacific War. Its compact scale and detailed plastic construction give the aircraft's broad-winged fighter shape a clear presence on the workbench and in a finished display. The full-size Hellcat was developed to replace the Grumman F4F Wildcat and to counter the Japanese Zero, and that background gives this subject a strong place in World War II aviation history. Power came from a 2,000-horsepower Pratt & Whitney R-2800 engine, a defining part of the aircraft's high-speed performance and fleet defence role. The wing armament of six 12.7 mm Browning machine guns shaped its use in air superiority sorties as well as close support and ground attack missions. The Hellcat design also became known for an impressive kill-to-loss ratio, adding further historical weight to the finished aircraft. Ages 14 Years and up marks the recommended age for this build. Once assembled and finished, the model suits display in aviation collections, dioramas, or World War II line-ups centered on carrier operations in the Pacific theatre.

Military aeroplane models

Italeri Harrier GR.3 Falklands War Model Kit

€19.99

Italeri Harrier GR.3 Falklands War brings one of military aviation's most recognisable V/STOL aircraft into 1:72 scale, with a finished model length of 15.3 cm and the compact proportions that suit shelf display, diorama scenes or a focused aircraft collection. The subject is the RAF Harrier GR.3 used during the 1982 Falklands conflict, a version known for close support and ground attack missions. The kit is designed as a detailed assembly model and reflects GR.3-specific equipment rather than a generic Harrier outline. The aircraft configuration includes the nose-mounted laser tracker and integrated electronic countermeasure systems noted for this variant. External stores broaden the historical setup, with underwing weapons and 2 drop tanks that match the aircraft's operational role and extended-range loadout. The included decal sheet covers 6 versions, giving scope for different serials, squadron markings and stencil layouts drawn from period RAF schemes. Assembly is required, with a stated build time of 600 minutes. Cockpit, fuselage, wing and landing gear stages create a build that moves through the aircraft section by section, while the finished markings and stores give the model a strong late-Cold War service look. Age marking: 14 years and over. Paints, cement and tools are required separately.

Military helicopters

Italeri HH-53C Jolly Green Giant Kit 1:72

€27.99

The Italeri HH-53C Jolly Green Giant kit in 1:72 brings a combat search and rescue helicopter to the workbench with the long, purposeful lines of a heavy-lift airframe shaped for demanding missions. Based on the Sikorsky HH-53C, this plastic kit recreates a U.S. Air Force aircraft that entered service in the late 1960s and became closely associated with Vietnam War operations. The subject stands apart through the mission equipment developed for CSAR search and rescue work in combat zones. The HH-53C evolved from the CH-53 Sea Stallion with changes that supported longer reach and tougher operating conditions, including an aerial refueling probe, additional fuel tanks, reinforced armor, and the option to mount extra defensive armament. Another defining element was the upgraded radio fit, used to coordinate with supporting aircraft such as tankers, attack helicopters, and other rescue assets during pilot recovery operations. That combination gives the finished model a distinct operational profile rather than a generic transport-helicopter look. On the bench, the 1:72 scale keeps the build manageable while still leaving room for the aircraft's characteristic external equipment and broad fuselage shape to read clearly. The completed helicopter suits military aviation collections, Vietnam-era lineups, and dioramas centered on rescue or support missions, where the HH-53C's specialized role gives it a strong visual presence.

Model tanks

Italeri HMMWV M966 TOW Carrier Model Kit 1:35

€24.99

Italeri HMMWV M966 TOW Carrier is a 1:35 scale assembly kit that captures the broad stance and military layout of this U.S. Army vehicle in a format built for detailed bench work. The finished model reaches 34.0 cm in length, giving the shape, proportions and roof mounted TOW installation clear visual presence once assembled. The build develops through chassis, interior and body stages, with separate seats, control levers, side structures, clear window parts and exterior fittings adding definition across the vehicle. A turret ring and roof opening support the mounted weapon assembly, while the front end is completed with grille and brush guard details that match the reference vehicle's field configuration. The underbody also carries routed mechanical parts such as exhaust sections and hook details, which help the model read convincingly from low viewing angles as well as from the side. Two marking options are provided for U.S. Army vehicles in Saudi Arabia in 1991, including a desert tan version and a camouflage version with Flat Green 383, Flat Brown 383 and Flat NATO Black references. This kit suits display builds that reward careful painting, decal placement and weathering work across doors, roof panels, bumper areas and body sides. Assembly kit only. Recommended age: 14+

Model helicopters

Italeri HO4S-3 HAS.7 H-19 Helicopter Kit 1:72

€16.79

The Italeri HO4S-3 / HAS.7 / H-19 is a 1:72 scale aircraft model kit built around one of the first tactical transport helicopters developed by Sikorsky. Its front-mounted engine configuration gives the H-19 its unmistakable profile and reflects the layout that helped define this early rotary-wing design in service use. The detailed plastic kit draws on an airframe used for troop and material transport and later adapted for roles such as maritime patrol and medical evacuation. That wider service history gives the finished model strong context beyond a single paint scheme. The set covers 4 versions: Sikorsky HO4S-3, U.S. Coast Guard, GCB St. Petersburg, Florida, 1963; Sikorsky HRS-2, U.S. Marine Corps, HMR-161, Korea, 1953; Westland Whirlwind HAS.7, Royal Navy, 1960; and Sikorsky H-19, ALAT, Algeria, 1958. Rotor details, landing wheels, cabin glazing and the side fuselage layout all contribute to the characteristic look of this period helicopter. Figures are not included. On the bench, the different service markings open up distinct display directions, from high-visibility rescue colours to naval and military finishes. Once completed, the model suits aviation collections that focus on Korean War subjects, Coast Guard aircraft, early helicopter development or post-war naval aviation. This 14 Years+ kit offers a focused build centred on a helicopter with broad international service history.  Warning! Not suitable for children under 14 years.

Military figures & accessories

Italeri House Corner Model Kit 1:35 Scale

€9.49

Italeri House Corner is a 1:35 scale assembly kit that brings a ruined urban facade into military and historical dioramas. The structure depicts a damaged house corner with a large open doorway, broken wall sections and exposed brick areas, creating a strong architectural focal point for street scenes, checkpoints or battle settings. The wall treatment combines cracked plaster, red brick texture and decorative stone trim, so painted finishes can shift between worn masonry, dust, soot and age marks with clear surface variation. The multi-story layout adds vertical presence without closing off the scene, while the open sections leave sightlines around figures, vehicles and ground details. A central support structure helps hold the wall halves together and reinforces the cross-section form shown in the build. Assembly is required, and the stated assembly time is 600 minutes. Placed at the edge of a road section, beside a vehicle, or as the backdrop to a figure group, the facade helps frame action without overwhelming the rest of the layout. It also works as a standalone scenery element for display shelves where damaged masonry, broken ledges and open architectural lines add depth to a compact footprint. The set contains the assembly kit.

Military aeroplane models

Italeri Hurricane Mk.I 1:48 Aircraft Model Kit

€33.49

Italeri Hurricane Mk.I 1:48 Aircraft Model Kit brings one of the Royal Air Force's defining early World War II fighters into a focused scale build. The detailed plastic kit centres on the Hawker Hurricane, an aircraft flown extensively during the Battle of Britain, with proportions in 1:48 scale that give the single-engine layout, canopy line and wing shape a strong presence on the bench and on display. The full-size aircraft was powered by a Rolls-Royce Merlin 12-cylinder, liquid-cooled inline engine delivering over 1,000 HP and reaching speeds above 500 km/h. Its armament of 8 Browning machine guns in 7.7 mm calibre made it a heavily armed fighter of its period. This edition also reflects the Hurricane's service with named RAF aces, and the kit provides 6 RAF aces versions for the finished markings: Douglas R.S. Bader, Robert R. Stanford-Tuck, Michael L. Robinson, W.L. Mc Knight, L. John W.C. Simpson and William 'Cherry' Vale. That combination of aircraft history, recognisable wartime form and multiple livery choices gives the build a clear direction at every stage. The finished Hurricane Mk.I fits naturally into WWII aircraft collections, diorama scenes and shelf displays where RAF subjects, Battle of Britain themes and ace-marked variants sit side by side.  Warning! Not suitable for children under 14 years.

Model figures

Italeri Imperial Guard Artillery Model Kit 1:72

€10.99

Italeri Imperial Guard Artillery brings a Napoleonic gun crew into 1:72 scale with a build centered on Guard foot artillery, field guns and the disciplined activity around them. The set represents a unit of Regiment d'Artillerie a Pied de la Garde Imperiale and captures the look of artillerymen working the cannon in coordinated positions across an open battlefield scene. The historical reference reaches beyond a generic artillery team. The crew is identified by the high bearskin bonnet issued in 1810, a distinctive uniform detail that sets this formation apart within Napoleon's Imperial Guard. The typical Guard artillery crew comprised 8 men, and that full team is reflected here for a more complete gun position. Separate parts for the artillery pieces and figures support a staged build that can be painted and arranged with attention to pose, spacing and period character. Assembly is required, with an indicated build time of 600 minutes. On a shelf, in a diorama or as part of a wider Napoleonic lineup, the 1:72 scale helps the finished scene sit naturally with other historical miniatures and terrain elements. Cannon crews in loading, aiming or firing arrangements can give a display a stronger sense of sequence and battlefield structure, whether the focus stays on a single gun emplacement or expands into a larger Grande Armée setting.

Model brushes

Italeri IT Round Brush 0/3 Synthetic Brown

€2.99

The Italeri IT Round Brush 0/3 Synthetic brown is built for detail painting where a fine point and controlled paint flow matter most. Its round 0/3 format and synthetic brown bristles suit careful work on small sections, from narrow panel details to tiny painted accents on assembly kit builds. The pointed tip supports accurate placement in recessed areas, along edges and around shaped surfaces that need a steady hand rather than broad coverage. Synthetic bristles offer a consistent brush shape for repeated use in hobby painting, while the metal ferrule keeps the bristle head neatly secured to the handle. The long handle adds reach and balance during slower finishing work, which helps when paint needs to be guided into tight contours or applied in thin lines. Assembly is required for the kit project this brush can be used with, and the stated assembly time is 600 minutes. On the workbench, this brush fits the stages where small corrections, trim colours and final painted details define the finished look. It also suits miniature and figure painting tasks that call for a narrow round tip and measured brush control rather than wide area coverage.

Model tanks

Italeri Italian Tanks & Semoventi Model Kit

€21.99

Italeri Italian Tanks & Semoventi brings WWII Italian armored vehicle design into 1:56 scale with a plastic assembly kit that can be built as an M13/40, M14/41, M40 or M41. The 103-part layout combines a compact footprint with visible military detail, from the bolted armor style of the M-series tanks to the casemate form used on the Semovente version, creating a finished model with a strong period silhouette. The subject matter draws on the Italian M-series vehicles used during the Second World War, including the M13/40 with its 47 mm cannon and the M40 self-propelled gun with a 75 mm howitzer mounted in a casemate. Track sections, hull panels, turret or upper fighting structure parts, and smaller fittings guide the build through the distinct shapes of tank and assault-gun variants. The kit also contains 2 figures, which can add scale reference and extra scene detail once the vehicle is placed on a base or in a display setting. Marking options extend across 4 versions, with decals covering unit insignia, tactical symbols and registration details. With about 600 minutes of assembly time, the build suits a slower bench session where fitting, painting and decal placement can be handled step by step. The finished model works well as a standalone display piece, as part of a WWII collection, or in a diorama that pairs the vehicle with terrain, structures and the included figures. Radio gear, a battery pack, a charger and paints are not part of this kit.  Warning! Not suitable for children under 14 years.

Model trucks

Italeri Iveco 190.38 Cowboy Model Kit 1:24

€58.99

The Italeri Iveco 190.38 Cowboy model kit in 1:24 scale brings one of the most recognisable Turbostar road tractors into a focused truck-building project. Its subject is the two-axle 190.38 Cowboy, launched by Iveco in 1983 and remembered for the combination of American-style exhaust pipes, a roof spoiler, and comfort-oriented styling details that set it apart within the range. The full-size Turbostar earned a strong place in the European truck market through its broad use in commercial transport, and by the late 1980s it had become the most widespread industrial vehicle in Italy. That background gives this build a clear historical setting: a road tractor from the era when long-haul truck design balanced working function with a more expressive exterior. The Cowboy version is especially notable within that story, as it remains one of the most sought-after Iveco trucks from the period. In model form, the 1:24 scale gives those signature exterior elements room to stand out during assembly and finishing. On the bench or in a display cabinet, the kit suits collections centered on classic European commercial vehicles and 1980s transport history. The subject also fits diorama scenes built around freight depots, service yards, or highway transport settings where a period road tractor gives the scene a clear time frame.

Model paints

Italeri Iveco S-Way model kit 1:24 scale

€70.99

The Italeri Iveco S-Way model kit brings a current long-haul truck into 1:24 scale, translating the full-size vehicle's bold road presence into a detailed build. Based on the successor to the Iveco Stralis and introduced in 2019, the S-Way is defined by a newly designed cab, a more aerodynamic profile, and a distinctive front-end look that gives the finished model a strong commercial vehicle character. As a detailed plastic kit, this build focuses on the shape and identity of a modern transport truck rather than on a simplified toy-like form. The cab architecture is a central part of that identity, reflecting the ergonomics-led redesign of the original vehicle and giving the model a contemporary silhouette. The subject choice also places the build in a recognisably modern trucking context, since the full-size S-Way was developed for maximum efficiency in long-haul transport applications. Advanced driver assistance systems, digitalisation features, and full connectivity solutions are part of the real vehicle's concept and help define the generation this model represents. On the workbench, the 1:24 scale format gives the truck enough presence for display while still supporting a manageable model-building session. The finished build suits a shelf, desk, or display cabinet where the aerodynamic lines and cab proportions can be seen clearly from multiple angles. Age 14 Years+

Model car kit

Italeri Iveco Turbostar Reefer Truck 1:24

€69.99

The Italeri Iveco Turbostar Reefer Truck in 1:24 captures a commercial vehicle that became a familiar sight on European roads at the end of the 1980s. As a plastic kit, it centres the refrigerated transport configuration, combining the Turbostar cab with an insulated cargo body that reflects the demands of food logistics and long-distance freight work. The full-size Iveco Turbostar earned its place through robustness, reliability and performance, and this scale version draws on that established working role rather than a generic truck theme. Its reefer layout sets it apart within the Turbostar family, showing one of the configurations widely used by transport companies with temperature-controlled loads. The model also reflects the sturdy twin-wheel rear axle arrangement seen on the original vehicle, a key part of the truck's balance between overall size and cargo volume. That combination gives the finished build the look of a hard-working fleet vehicle with a clear transport purpose. On the bench or in a display cabinet, the 1:24 format gives the truck enough presence to show the proportions of the cab and refrigerated box body clearly. Recommended from 14 years, it fits builders who want a classic Italian commercial vehicle subject with a strong period identity and a specialised haulage configuration.

Model tanks

Italeri Jagdpanzer 38(t) Hetzer Model Kit 1:35

€34.49

The Italeri Jagdpanzer 38(t) Hetzer model kit brings a compact World War II tank destroyer into 1:35 scale, combining the vehicle's low silhouette with the visual impact of a closed casemate and a forward-mounted 7.5 cm gun. That combination gives the finished build the tense, purposeful look that made the original Hetzer so hard to spot when camouflaged in the field. Its design traces back to the proven mechanical basis of the Panzerkampfwagen 38(t), a foundation chosen for reliable production and efficient manufacture in the second half of 1943. The original vehicle entered service in the second half of 1944, where its low profile, frontal armor and concentrated firepower made it a highly effective tank destroyer. In model form, those same characteristics create a subject defined by tight proportions, angled armor surfaces and a compact fighting compartment. The detailed plastic kit format keeps the focus on the Hetzer's distinctive structure rather than on oversized dimensions or decorative extras. During assembly, the 1:35 scale layout invites close attention to the relationship between hull, casemate and gun, making the vehicle's design logic easy to read in three dimensions. Once completed, the model fits naturally into military collections, dioramas or display shelves where compact armored vehicles and late-war German subjects take center stage.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri JAS 39 A Gripen Model Kit 1:48 Scale

€28.99

The Italeri 1:48 JAS 39 A Gripen brings the compact lines of Sweden's modern fighter-bomber into a build that balances aircraft character with a manageable 30 cm finished length. In this scale, the canard configuration, swept wing planform and lean fuselage shape come through clearly on the bench and in a finished display. The subject reflects the real aircraft's role in the Swedish Air Force, where the JAS 39 A Gripen is known for high manoeuvrability and an electronics suite designed for all-weather and night-time operations. That background gives the model a strong technical identity while painting and finishing move attention to the jet's panel lines, flying surfaces and external stores. Decals for 2 versions open up alternate marking choices, so the final look can follow different service presentations rather than a single fixed scheme. The stated assembly time of 600 minutes also places this kit in a more involved build category, with enough scope for careful preparation, joining, painting and decal placement. On a workbench, the 1:48 format supports a focused aircraft project that can be spread across several sessions. Once completed, the 30 cm model sits comfortably in a cabinet, on a shelf or alongside other modern aviation subjects while keeping the Gripen's distinctive silhouette easy to read at a glance.

Military aeroplane models

Italeri JAS 39 GRIPEN Aircraft Model Kit 1:72

€14.49

Italeri JAS 39 GRIPEN brings the lines of the Swedish multi-role fighter into a 1:72 aircraft model kit with a finished length of about 200 mm. The compact scale keeps the canard layout, swept wing shape and modern jet profile readable on a shelf while still leaving room for detailed finishing work across the airframe. As an assembly kit, this release focuses on the build itself rather than a ready-made display piece. The unassembled parts show the aircraft broken down into fuselage sections, wings, tail elements, landing gear and external stores, so each stage of construction adds another visible layer to the final aircraft. Decals for 4 versions open up different marking directions, including standard service-style finishes and more distinctive commemorative artwork seen on the supplied sheet. That mix gives the same JAS 39 GRIPEN airframe different visual character depending on the chosen scheme. Assembly takes about 600 minutes, which suits a measured build with time for painting, decal application and final detailing. On the workbench, the 1:72 format fits neatly into longer painting and finishing sessions without demanding much space. Once completed, the 200 mm aircraft sits comfortably in a display case, on a desk or alongside other modern military aviation models in the same scale.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri JAS-39D Gripen 1:72 Twin-Seater Kit

€16.99

Italeri JAS-39D Gripen brings the Swedish twin-seat multirole fighter into 1:72 scale as a detailed plastic kit, combining a compact footprint with the sharp lines of a late-1990s combat aircraft. The JAS-39D version was developed from the single-seat Gripen to support advanced pilot training while retaining the strong flight performance associated with the type. The real aircraft paired an innovative aerodynamic design with excellent maneuverability, and that distinctive layout gives the finished model a purposeful modern jet profile. In service, the two-seat variant added operational flexibility beyond training, with roles that also included reconnaissance and ground attack. The full-size aircraft reached a maximum speed of Mach 2.0, a figure that underlines the high-performance character represented by this scale build. The contrast with the earlier Saab 37 Viggen also places the Gripen in a clear generation of newer Swedish combat aviation. On a workbench, the 1:72 format supports a focused aircraft build that does not demand a large display area once complete. In a collection of military aircraft, the twin cockpit and modern canard-delta configuration help the JAS-39D Gripen stand apart from more conventional fighter shapes. The age marking is 14 years and up.

Military aeroplane models

Italeri JAS-39D Gripen Twin Seater Model Kit

€26.79

The Italeri JAS-39D Gripen Twin Seater model kit brings a modern Swedish fighter into 1:48 scale, combining the compact canard-delta silhouette with the extended 2-seat cockpit layout of the training variant. The subject entered service in the second half of the 1990s, and the finished aircraft carries the sharp lines, single engine exhaust and multirole character that define the Gripen family. This JAS-39D version was developed to meet advanced pilot training requirements while keeping essentially the same performance as the single-seat fighter. That background gives the build a clear technical identity, with a configuration linked not only to training duties but also to reconnaissance and ground-attack missions. The aircraft's aerodynamic design is noted for excellent maneuverability, and the full-size jet reached a maximum speed of Mach 2.0. The box image also identifies this release as a New Decals Edition, with a Super Decals sheet for 4 versions. Figures are not included. On the workbench, the 1:48 scale gives room to focus on painting, markings and the distinct proportions of the twin-seat canopy. Once completed, the model fits naturally into modern military aircraft collections, whether displayed as a Swedish air power subject or alongside other late 20th century combat aircraft. 14 years is the recommended age.  Warning! Not suitable for children under 14 years.

Military figures & accessories

Italeri Jerrycans 1:35 WWII Ger./US Kit

€9.49

Italeri Jerrycans 1:35 WWII Ger./US is a small assembly kit built to add focused stowage detail to military models and diorama scenes. The 1:35 scale format fits naturally alongside vehicles, cargo areas and field layouts, while the mix of German and US can styles gives scenes a broader WWII supply character. The set is supplied as an assembly kit with unbuilt parts on sprues, making clipping, cleanup and painting part of the finished result. Visible can details include molded caps, carry handles, embossed X-pattern faces and raised markings such as USA and 20L, all of which help the accessories read clearly once placed on a vehicle, beside equipment or in a depot setting. Image material also shows both loose cans and grouped storage formats, so the finished pieces can be positioned upright, laid flat or arranged in holders to vary the look of a loadout. The stated assembly time is 600 minutes. Minimum age: 14 Years. Placed on a truck bed, beside an armored vehicle or across a supply point in a diorama, the set adds the kind of compact cargo detail that makes a static scene feel more complete. It also works as a finishing layer for builders refining parked vehicles, workshop corners or battlefield resupply layouts with small-scale accessories rather than major structural changes.

Model tanks

Italeri JS-2 Stalin Tank Model Kit 1:56 Scale

€21.99

The Italeri JS-2 Stalin brings one of the Soviet Union's most formidable World War II heavy tanks into a 1:56 scale build with a finished length of 17.7 cm. Its long 122 mm cannon, centrally mounted turret and distinctive heavy-tank profile give the model a strong presence whether it stands in a display line or takes its place in a tabletop force. This assembly kit is based on the vehicle developed in 1943 to replace the KV tanks and to answer heavily armoured German designs such as the Tiger and Panther. The original JS-2 combined a cast steel hull, heavy armour and a 12-cylinder diesel engine with over 600 HP in a 46 ton chassis, and those defining features shape the look of the finished miniature. The kit contains 77 parts and requires assembly, with an indicated assembly time of 600 minutes. Decals for 5 versions open up different historical finishing routes, including Soviet and Polish marking options shown on the sheet. The completed model suits painting, weathering and historical vehicle line-ups, and it also fits naturally into WWII tabletop gaming at 1:56 scale. Assembly kit, paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Military aeroplane models

Italeri JU-87 B2 Stuka Aircraft Model Kit 1:72

€15.99

Italeri JU-87 B2 Stuka is a 1:72 aircraft model kit that recreates one of the most recognizable dive bombers of the Second World War in a compact 15.4 cm format. The assembly kit focuses on the lines of the Ju-87 B2/R2 airframe, with propeller, fixed landing gear, wing assemblies and cockpit sections that come together as a detailed scale build for the workbench and display shelf. The kit supports more than one finishing route through its B2 and R2 configuration options, and the instruction sequence shows alternative parts for selected versions. A canopy-open option changes the final presentation and keeps the cockpit area in view. Decals for 4 versions expand the historical range further, covering aircraft from Libya in January 1942, France in August 1940, Crete in May 1941 and Greece in December 1940. The marking sheet and paint guides help shape each scheme through unit codes, insignia and theatre-specific camouflage references. With a stated assembly time of 600 minutes, this model suits a slower, step-by-step build that moves through construction, painting and decal placement in clear stages. The 14 Years age marking fits the fine parts, version choices and finishing work involved. On a shelf, desk or in a wider 1:72 aircraft lineup, the completed Stuka brings a historically specific military aviation subject into view with multiple documented liveries to choose from.