RC remote controls

RC remote controls

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio system into a 4-channel transmitter built for fast, exact control on the track. High resolution signal processing and a redesigned electronic layout work together for a notably direct steering response, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. The set includes the KR-242XT receiver with long antenna for telemetry use. Its menu structure goes far beyond basic trim changes. Steering functions cover servo travel limit, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, auto-start, idle-up, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. A display, conversion calculator, VR information, sound settings and adjustable menu speed keep setup work clear at the bench between runs. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V, or a LiPo rechargeable battery 2S 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 2.4 GHz transmitter built for fast, exact control. Its redesigned electronics deliver a highly direct steering feel and, in XT Advanced Mode, transmission speed up to 3 times faster than the EX RR. The included KR-242XT receiver with short antenna completes the core setup for telemetry use. A 4-channel PWM or serial layout gives the system a broad technical base for competition-focused RC driving. Steering functions include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim or balance and servo reverse. Throttle and brake adjustment extends further with 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way switching, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The transmitter measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving a substantial handheld format for longer sessions at the track. Timer functions include lap history, trigger start, lap navigation and alarm mode for structured race practice. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately. Age 14+  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 4-channel 2.4 GHz

€439.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 4-channel transmitter built for fast, exact control. High resolution signal processing and the redesigned electronics work together for a notably direct steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. In the hand, the 240.5 x 163.0 x 107.2 mm format and 551 g weight create a substantial control unit for focused driving sessions. Its menu depth goes well beyond basic steering and throttle adjustment. Steering settings include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake functions add 3-stage forward and reverse speed, acceleration, push control, auto-start, idle-up, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way functions, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. Telemetry features cover RF mode, pairing, Real-Time ICS and battery failsafe, while timer functions include lap history, trigger start, alarm mode and lap navigation for track-focused running. The set comes with 2 KR-242XT receivers with short antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V or a LiPo rechargeable battery 2S 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC RC transmitter, 4-channel 2.4 GHz

€399.99

The EX-NEXT BASIC RC transmitter brings KO Propo control hardware into a focused 4-channel 2.4 GHz format built for fast, accurate driving. XT radio technology and newly developed electronics work together for highly precise response, with XT Advanced Mode reaching up to 3 times the transmission speed of the EX RR. The result is a notably smooth steering feel and direct control input that suits racing, competition and high-performance RC models. Its setup depth goes well beyond basic trim functions. Steering adjustment covers servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake tuning add 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, brake-in, hand brake and override. Timer functions include lap history, trigger start, lap navigation and alarm mode, while system tools add display settings, menu speed, battery information and a conversion calculator. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the unit a substantial hand-held format for track sessions and bench setup alike. The set includes 1 KR-242XT receiver with long antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery 6.6 V or a 2S LiPo rechargeable battery 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT Basic, transmitter set, 4-channel 2.4 GHz

€439.99

Fast response and fine control define the EX-NEXT Basic transmitter set for ambitious RC driving. The 4-channel 2.4 GHz system uses the XT radio standard and combines the EX NEXT master unit with LCD, Xpansion Unit 2 EXP 201, Extension Unit 2.1 Basic and Grip Unit 2 Basic in one configured setup. The electronics platform supports XT Telemetry as the factory RF mode and reaches up to 3x the transmission speed of the EX RR in XT Advanced Mode. Real-Time ICS, pairing functions, battery failsafe and a wide system menu expand the setup range beyond basic driving adjustments. The transmitter measures 240.5 x 163.0 x 107.2 mm, weighs 551 g excluding batteries and has a power consumption of 200 mA. Timer functions include trigger start, lap history, lap navigation, alarm mode and start stop control, adding useful race-day data handling alongside the driving setup. Compatible receivers are listed as KR 420XT and KR 242XT, and this version comes with 2 KR-242XT short antenna receivers. Power is supplied separately via 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery at 6.6 V or a 2S LiPo rechargeable battery at 7.4 V. The broad menu structure suits competition sessions, multi-car pit setups and detailed tuning work on performance-focused RC models.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC, transmitter, 4-channel 2.4 GHz

€419.99

The EX-NEXT BASIC transmitter brings KO Propo control technology into a focused 4-channel 2.4 GHz format built for precise RC driving. XT radio standard and high-resolution signal processing work together for very fast response and a notably smooth steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. On the bench or at the track, that combination supports direct inputs and clean corrections through technical sections. Its control architecture goes well beyond basic steering and throttle adjustment. Steering functions include servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, push control, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3-8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the transmitter a substantial hand feel for longer sessions. Model selection, model copy, model reset and 50 memory slots support fleets with different setups, while the timer menu adds start timer, trigger start, lap button and lap navigation for repeatable practice runs. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz

€119.99

The FS 14K Reflex Stick Pro 4 brings a 14-channel layout, 2.4GHz transmission and a modern ergonomic RC housing into one control system shaped for complex model functions. Its carbon-look surface and illuminated logo give the transmitter a technical, workshop-ready appearance when powered on. The channel structure is designed for detailed function control. Four channels work continuously and fully proportionally for direct response through the control sticks, while channels 7, 8, 9, 10, 13 and 14 are assigned to 3-position toggle switches. Channels 5, 6, 11 and 12 operate through 3-position push buttons with centre position, creating a clear split between proportional inputs and switched functions. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply allows up to 11 V without BEC. A 15-channel receiver is listed in the included contents. For setup work, channels 1 to 4 feature servo reverse and trim, and channels 1 and 4 add dual rate for servo travel adjustment. This makes the system suitable for models that need tailored steering, throttle or auxiliary function behaviour. 100% compatibility is stated for TAMIYA MFC 01, MFC 02, MFC 03 and DMD units, which suits truck and function-model layouts with multiple switching tasks. 14 Years is stated as the recommended age.

Remote-controlled systems

FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz

€149.99

The FS 14K Reflex Stick Pro 4 LCD 2.4GHz brings broad channel control and fine setup options into one radio system built for demanding RC models. With 14 channels, an LCD layout and a 15-channel receiver in the set, it supports complex functions that go beyond basic steering and throttle, while the carbon-look finish and illuminated logo give the transmitter a distinctive technical appearance. Channels 7, 8, 9, 10, 13 and 14 use 3-position toggle switches, while channels 5, 6, 11 and 12 use 3-position push buttons with centre position. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply can reach up to 11 V without BEC. A Graupner J/R connector system is used for integration, and the radio is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as DMD units. The set includes the 14-channel LCD remote control, a 15-channel receiver and a manual. For truck, construction and function models with multiple switching tasks, the channel layout supports lighting, sound and auxiliary functions from one handset. The 14 Years marking fits advanced RC use, where stored model setups and detailed channel assignment matter during regular driving and system changes.

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

€99.99

The FS 6K Reflex Stick Pro 4 2.4GHz brings 6-channel radio control into a layout built for detailed model setups and precise handling. Four continuously adjustable, fully proportional channels work alongside a 3-position push button on channel 5 and a 3-position toggle switch on channel 6, giving a clear control structure for driving functions and switched features. The integrated failsafe system adds an important control function for model operation. Trim for channels 1-4 supports exact correction directly at the transmitter, while dual rate for channels 1-2 adjusts servo travel for a more tailored response. The control sticks use precise, smooth mechanics, and the housing combines an ergonomic shape with a carbon-look surface and an illuminated logo when powered on. The transmitter operates at 4.8-6 V with 4 AA cells, the receiver power supply reaches up to 11 V without BEC, and the connector system uses Graupner J/R. Compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units expands the range of suitable model applications. On the bench, the channel layout supports careful setup of steering, throttle and auxiliary functions before a model heads out. During driving sessions, the separate switching options and proportional control help keep inputs clean and deliberate across different model configurations.

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

€109.99

The FS 6K Reflex Stick Pro brings 2.4GHz radio control, a 6-channel layout and an LCD interface into one focused setup for model driving with a clear, technical feel in hand. Smooth control sticks, an ergonomic housing and a carbon-look surface shape a transmitter that suits longer sessions at the workbench and on the track alike. Channels 1 to 4 are continuously adjustable and fully proportional, while channel 6 is assigned to a 3-position toggle switch and channel 5 to a 3-position push button with centre position. The transmitter stores 15 model memories, making it easier to keep separate configurations ready for different vehicles. For channels 1 to 4, servo reverse changes direction of movement, trim corrects neutral position, dual rate adjusts servo travel, EPA limits servo travel and EXP changes response characteristics around centre input. The receiver power supply can reach up to 11 V without BEC, and the system is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as the DMD unit. A 6-channel receiver and manual are included. 4 AA cells are required separately for the 4.8 to 6 V transmitter operating voltage. With a minimum age marking of 14 years, this radio set fits hobby-focused RC setups where multiple channel functions, stored profiles and detailed response adjustment matter during driving and setup.

RC remote controls

KO MC-8 TR Set, radio set, 8-channel 2.4 GHz

€119.99

The KO MC-8 TR Set brings compact 8-channel radio control to function-rich RC installations, combining the MC-8 transmitter, the MR-8 receiver and the Xpansion keypad in one coordinated setup. With 2 dual thumb sticks, channels A to H and trim controls for channels A to D, the layout supports direct command over steering, drive and additional assigned functions while keeping the controller body easy to handle. The top keypad extends the system with dedicated inputs for functions shown on the panel, including light position, hazards, left and right turn signals, horn, main beam and engine-related commands on compatible vehicle systems. The MR-8 receiver provides 8 channel ports marked A to H plus a battery connection, giving hobby builds a clear structure for wiring multiple functions into one radio system. The set operates at 2.4 GHz and is specified for 4.8-6 Volt, matching common RC electronics layouts. Age 14 Years. This configuration suits scale trucks, special-function vehicles and other hobby builds where more than basic steering and throttle are part of the driving session. Lighting, signal and sound functions can be called up directly from the transmitter, so complex model setups stay manageable during operation.  Warning! Not suitable for children under 14 years.

RC remote controls

KO Trigger Pad Set, model accessory

€10.59

The KO Trigger Pad set is a model accessory from the Carson Modelsport range, listed with the exact designation used in the product data. With an assembly time unit in minutes, a voltage unit in volt, a maximum speed unit in km/h and a maximum operating time unit in minutes present in the data structure, the available verified detail for this entry remains focused on the accessory name itself rather than on technical fitment or performance figures. That makes the strongest, most reliable description a precise one: KO Trigger Pad set identifies a specific spare or replacement component for model-related equipment, and it belongs in a parts selection built around exact naming. The data confirms that batteries are not included and gives an age marking of 14 Years. No further verified information is provided here on compatibility, dimensions, material composition, included quantity, or supported systems, so those points are left unstated rather than guessed. Within a hobby bench, workshop drawer or model maintenance setup, an exactly named accessory set helps keep existing equipment in service and supports targeted parts searches when a matching component is needed. The entry is therefore written around the confirmed designation and the clearly stated 14 Years age marking, without inventing fitment details that the data does not supply.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

RA 3Ch Reflex Stick Pro 4, remote control, 2.4GHz

€49.99

The RA 3Ch Reflex Stick Pro 4 brings 2.4GHz radio control together with a classic stick layout for model driving that calls for direct, proportional input. With 3 channels and 2 continuously adjustable, fully proportional control paths, steering and throttle commands can be metered with fine control, while channel 3 is switched in 2 positions for a clear auxiliary function. Channel 1 includes dual rate to adjust servo travel, which helps match the steering response to different model setups. Servo reverse changes the direction of movement for the channels when the installation requires it, and the trim function for channels 1-2 supports accurate neutral settings. The transmitter operates at 4.8-6 V with 4 AA cells, and the receiver power supply allows up to 11 V without BEC. The connector system uses Futaba/Graupner J/R, giving the set a clear interface for compatible RC components. The set includes the 3-channel remote control, a 4-channel receiver and a manual. An LED battery status indicator keeps the transmitter charge level in view during running sessions, while the failsafe system provides a defined response if the radio link is lost. Age 14 Years+  Warning! Not suitable for children under 14 years.

Remote-controlled systems

RA 4Ch Reflex Stick Pro 4, remote control, 2.4GHz

€64.99

The RA 4Ch Reflex Stick Pro 4 2.4GHz LCD brings 4-channel control and detailed setup functions into one radio system for model driving from age 14 years. Its LCD layout supports direct access to key settings, while 15 model memory slots keep multiple vehicle configurations stored and ready for use. Two fully proportional channels allow continuously adjustable steering and throttle input, and 2 additional switch channels handle special functions on compatible models. Channels 1 and 2 can be tuned with servo reverse, trim, dual rate, EPA and EXP, giving clear control over direction, centre position, servo travel limits and response curve. The integrated failsafe system adds a concrete control safeguard for supported setups. The transmitter operates at 4.8 to 6 V with 4 AA cells, and the connector system uses Graupner J/R. A 4-channel receiver is included, so the system can move straight into installation on a suitable model. The receiver power supply supports up to 11 V without BEC, which suits a wide range of hobby configurations. This combination fits model-building enthusiasts who want one radio system for several vehicles, special functions and fine setup work at the bench or track.  Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Pro 3 Electric Set, RC radio system

€124.99

The RC-Reflex Pro 3 Electric Set brings the core electronics for an RC ground model into one coordinated package. A 2-channel 2.4 GHz transmitter works with a 4-channel mini receiver to handle steering and throttle commands, while the pistol-grip layout supports one-handed control with a trigger and side wheel format familiar in car-based RC setups. Alongside the radio link, the set includes a CS-6 steering servo for installation in a compatible model and a 7.2 V 3000 mAh drive battery for the vehicle itself. The Expert Charger is part of the set, and 4 AA transmitter batteries are also included for the handset. This combination suits fresh builds, replacement electronics, or an upgrade from older radio gear where the main control components need to be assembled in one step. With 2 frequency channels and 16 listed parts, the set covers the central functions needed to equip a model for radio-controlled driving. In use, the electronics set fits naturally into workshop preparation before a chassis goes to the track, car park or garden path. The included components support installation, charging and control in a format aimed at hobby-focused RC driving, whether for a first compatible setup or as a practical replacement package for an existing model.  Warning! Not suitable for children under 14 years.

RC remote controls

REFLEX STICK PRO 3.1, radio set, 2.4GHz

€84.99

The REFLEX STICK PRO 3.1 Elektro Set brings the core electronics for an RC model into one coordinated package, centred on a 2-channel 2.4GHz radio system with fully proportional control. Steering and throttle inputs respond progressively rather than in fixed steps, which supports cleaner line control on the track, at the workbench, or during first setup runs. The transmitter operates on 4.8-6V and uses a stick layout familiar across many hobby-grade applications. Beyond the radio itself, the set combines a 2.4G receiver, a CS3 servo, a 7.2V 2500mAh racing pack, a USB charger with 7.2V 250mAh output, and 4 AA Ansmann batteries. Servo reverse is available on both channels, so steering or throttle direction can be corrected directly at the transmitter when the installed linkage runs opposite to the intended movement. The steering and throttle trim functions help dial in neutral position and straight tracking, while dual rate on the steering channel allows reduced or expanded steering travel depending on the model's response. A charging socket with positive pole inside and an LED battery charge status indicator add clear handling details during use. The plug system is compatible with Futaba and Graupner JR, which broadens integration across common RC installations. In a touring car, buggy, boat, or similar hobby build, the set covers the key radio and power components needed to move from installation to controlled running with matched electronics.  Warning! Not suitable for children under 14 years.

RC remote controls

REFLEX XS 2.4GHz Transmitter, RC controller

€25.99

The REFLEX XS 2.4GHz transmitter brings classic wheel-style RC control to compatible XS-Chassis models with a compact pistol-grip format, a side steering wheel and a trigger for throttle and brake input. The black and dark grey housing keeps the layout focused, while the 2.4GHz system suits interference-conscious driving sessions where clean radio control matters. Its control concept follows the familiar car transmitter arrangement: the foam-covered wheel handles steering input, and the trigger manages acceleration and braking through one hand position. Visible setup markings such as REV, ST, TH and D/R point to onboard adjustment functions that support model-specific tuning rather than a fixed one-setting layout. The top section also carries additional adjustment points, giving hobby users direct access to setup changes on the transmitter body. This transmitter is intended for CARSON XS-Chassis references 500404360, 500404361, 500404362, 500404363, 500404252, 500404253, 500404254 and 500404255. The 14 Years age marking is stated in the product data. In the workshop, at the track or on a casual driving surface, the wheel-and-trigger format keeps steering and speed control close together for responsive handling on compatible RC vehicles.

RC remote controls

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€109.99

The Reflex Wheel Pro 4 electric set brings wheel-style RC control, core onboard electronics and matched power components together in one package for 2.4 GHz model operation. With a 3-channel transmitter, a 4-channel mini receiver, a 6 kg CS6 servo and a 7.2 V 3000 mAh NiMH drive battery, the set covers the central functions needed to equip an electric RC vehicle for hobby use. The transmitter runs on 3.6 to 4.5 V and uses an ergonomically angled 4° steering wheel position for a natural hand layout during longer driving sessions. Channel 3 can be programmed as a switch or button function for a servo, adding another control option beyond steering and throttle. The receiver power supply supports 3.5 to 10 V without a BEC, and the nano receiver is waterproof for installation in models exposed to wet running conditions. A ball-bearing control unit supports precise steering input, while the LED battery status display keeps the charge state visible during setup and use. The included charger is designed for NiMH packs with 4 to 8 cells and delivers up to 2 A output power. Uni connector system compatibility for Futaba and Graupner-J/R broadens integration with existing RC equipment, making the set a strong base for electric model builds, upgrades and replacement radio installations. Age 14+  Warning! Not suitable for children under 14 years.

RC remote controls

RA 3Ch Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€59.99

The RA 3Ch Reflex Wheel Pro 4 brings 2.4 GHz control, a 4-channel mini receiver and a 5 kg CS5 servo into one radio set built for RC model driving with direct, adjustable command at the wheel. With a pistol-grip transmitter, side steering wheel and trigger throttle, the layout follows the handling style widely used in ground vehicles and keeps key functions close at hand. Channels 1 and 2 work fully proportionally, so steering and throttle inputs can be fed in smoothly rather than only in fixed steps. Servo reverse for both channels changes the direction of travel response when a model needs the opposite movement, and separate trim for throttle and steering helps straighten running behaviour without mechanical changes. Dual rate on both channels limits servo travel and can reduce speed response, which is useful when matching control sensitivity to different chassis layouts. Channel 3 is programmable as a switch or button function, adding another control option for compatible RC installations. The receiver accepts a power supply up to 6 V without a BEC and uses a Uni connector system for Futaba and Graupner-J/R compatibility. A waterproof nano receiver format suits compact installations, while the LED battery status display gives a clear visual check on transmitter power. The set includes the transmitter, 4-channel mini receiver, 5 kg CS5 servo and instructions. 4 AA batteries are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

RA 4Ch Reflex Wheel Pro 4, RC transmitter

€59.99

The RA 4Ch Reflex Wheel Pro 4 2.4GHz LCD brings a compact pistol-grip layout, 4-channel control and a clear display into one radio system for RC driving with precise steering and throttle input. Its angled 4° steering wheel position, ball-bearing control unit and carbon structure shape a focused handling feel at the transmitter itself while the blue-lit LCD keeps setup values readable at a glance. Two channels work fully proportionally for finely graded control, while channel 3 can be programmed as a switch or button function and channel 4 uses a 3-level switch. The transmitter operates at 3.6-4.5 V, and the receiver accepts 3.5-10 V without a BEC, which broadens the range of compatible model installations. A failsafe function adds a concrete control safeguard if signal is lost. The system also stores settings for up to 15 models, which helps keep separate configurations ready for different vehicles instead of resetting trim and response values each time. Included are the 4-channel 2.4 GHz transmitter, a 4-channel mini receiver and instructions. 4.8-6 V operation and the compact receiver format suit hobby setups where steering, throttle and auxiliary functions need one coordinated radio system for track driving, car park sessions or workshop tuning between runs.  Warning! Not suitable for children under 14 years.

RC remote controls

FS 3K Reflex Wheel Pro 4 2,4GHz

€45.99

The Carson RA 3Ch Reflex Wheel Pro 4 2.4GHz (500500110) is an ergonomic 3-channel remote control with 2.4 GHz system, nano receiver and instructions. For model building fans, it offers two infinitely variable proportional channels, programmable channel 3, servo reverse, trim and dual rate functions, LED battery indicator, failsafe, ball bearing steering wheel and operating voltage 3.6-4.5 V. Not for children under 14 years.   Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Pro 3, electric set, 2.4 GHz RC

€124.99

The RC-Reflex Pro 3 Electric Set brings together the core electronics needed to equip ARR and assembly kit models for the track or the water. Built around a 2.4 GHz radio system, the set suits RC cars and boats and combines control hardware, charging equipment and NiMH power components in one coordinated package. The transmitter works with an operating voltage of 4.8 to 6 V and pairs with a 4-channel receiver. Two continuously controllable fully proportional channels handle steering and throttle inputs with direct response. Servo reverse is available on both channels, while trimming functions for accelerator and steering help align the model accurately. Dual rate on both channels limits servo travel when a calmer steering setup is needed. The integrated fail-safe adds a concrete control function for signal loss situations, and the plug system supports Futaba and Graupner-J/R connections. A charging socket with plus terminal inside is built into the system. Power supply is covered by a 7.2 V 3000 mAh NiMH driving battery with TAMIYA plug and 4 NiMH Mignon 1.2 V 2100 mAh transmitter batteries. The included 2-in-1 charger works from 100-240 V, 50-60 Hz AC and provides max. 2 A at 9 V on output 1 and max. 0.5 A at 6 V on output 2. With the CS-6 steering servo, receiver, charger and battery set included, this electric package fits hobby setups that need a complete radio and power foundation for Tamiya-compatible models. Age 14 Years  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel Start, radio control, 2.4 GHz

€34.99

The Reflex Wheel Start brings classic wheel-style RC control into a compact 2.4 GHz system with a black pistol-grip transmitter and matching 3-channel mini-receiver. A large side steering wheel and trigger layout create the familiar handling used in many RC car setups, while the wireless link supports clean installation in compatible models. Two fully proportional channels allow gradual steering and throttle input instead of simple on or off commands. Servo reverse changes the travel direction when a steering or throttle servo moves the wrong way after installation, and the trim functions for both gas and steering help centre the model accurately. Dual rate on both channels makes it possible to limit servo travel, which is useful when a setup needs reduced steering throw or a calmer response. The transmitter operates on 4.8 to 6 V, and receiver powering without BEC is possible up to 11 V. The Uni connector system supports Futaba and Graupner-J/R layouts, adding flexibility for different hobby setups. An LED battery status display keeps the transmitter power level in view during driving sessions or bench setup. The integrated failsafe adds a concrete control feature for RC use, and the included transmitter with mini-receiver forms a practical entry point for 14 years and up.  Warning! Not suitable for children under 14 years.

RC remote controls

MC-8 2.4GHz MX-F TR set, RC radio system

€104.99

The MC-8 2.4GHz MX-F TR set brings game-controller handling to an 8-channel RC radio system, combining the transmitter with the MR-8 micro receiver for compact installation in demanding model layouts. With the receiver measuring 27 x 28 x 15 mm, the set suits builds where available space matters as much as dependable multi-channel control. Its control layout goes beyond basic steering and throttle. The left and right 3D joysticks each include a push-button function, opening extra input options for assigned model functions. A Uni/Fut. connector system supports integration with compatible equipment, and the set is specified for use with TAMIYA MFC-01, MFC-02 and MFC-03 as well as DMD/MF units. The 2.4 GHz transmission standard supports modern radio operation for hobby models that need several functions managed from one handset. In workshop setups, scale trucks and function-rich RC builds can benefit from the extra channels for lighting, sound or special movements where the connected system supports them. 4 AAA batteries are required separately for operation, making the set ready to slot into existing hobby equipment with a straightforward power requirement.

RC remote controls

RC-Reflex Start Electric Set, RC set, 1:10

€69.99

Built for 1:10 TAMIYA RC kits, the RC-Reflex Start Electric Set brings the key electronics for vehicle operation into one coordinated package. The set combines a compact 3-channel 2.4 GHz transmitter with matching receiver, a CS-3 steering servo, a 7.2 V 2500 mAh NiMH driving battery, a USB charger and 4 x AAA transmitter batteries, creating a clear starting point for hobby builds that still leaves room for precise setup work. The pistol-grip transmitter uses a wheel-style steering control and trigger throttle layout that suits RC car handling, while 2 fully proportional channels respond gradually rather than in fixed steps. Trim functions for accelerator and steering help correct running behaviour, and the servo reverse function allows the steering direction to be switched when the installation calls for it. A fail safe system adds a concrete control safeguard, and an LED battery status display keeps the charge state visible during operation. The included 3-channel receiver provides the matching vehicle-side link for the 2.4 GHz system. For workshop bench setup, club track preparation or the first runs after a fresh kit build, the set covers the central radio and power components in one box. The 14 Years marking fits the hobby-oriented character of the set, especially where model builders want a straightforward electronics package for getting a 1:10 chassis ready for driving.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel Pro 4, RC transmitter, 2.4 GHz

€69.99

The Reflex Wheel Pro 4 brings 2.4 GHz control, LCD setup access and a wheel-style layout into one radio system built for RC model use. With 4 channels, 2 included mini receivers and a transmitter operating voltage of 3.6-4.5 V, it covers steering, throttle and added switching functions in a compact setup for multiple vehicles. Channels 1 and 2 work as fully proportional controls, giving fine input over steering and throttle instead of fixed steps. Channel 3 can be programmed as a switch or button function for a servo, while channel 4 uses a 3-level switch for added onboard functions. Servo reverse for channels 1 and 2 changes direction of travel when a model layout requires it, and the receiver power supply range of 3.5-10 V supports installation in different RC configurations without a BEC. The ball-bearing control unit supports precise steering input, while trim, dual rate, expo and ABS functions allow response to be adjusted to the model and surface. The LCD screen and LED battery status display keep key settings and charge information visible during setup and running. A failsafe function adds a concrete control feature for signal loss situations, and 15-model memory stores settings for different vehicles. The Uni connector system for Futaba and Graupner-J/R broadens compatibility across existing RC equipment. 4 AA batteries are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel X1, RC transmitter, 2.4GHz 2-channel

€47.99

The Reflex Wheel X1 brings 2.4GHz radio control and a classic pistol-grip layout into one focused setup for RC driving. A side steering wheel, trigger throttle and 2 fully proportional channels give fine control over steering and speed, whether the model is lining up for a clean straight or working through tighter corners. At the technical level, the transmitter runs on 4.8 to 6V and pairs with a compact 4-channel mini-receiver measuring 36 x 25 x 15 mm. The receiver power supply supports up to 11V without a BEC, and the Uni connector system J/R broadens compatibility across common hobby installations. A charging socket with positive pole inside is built into the transmitter, and an LED battery status display keeps the power level visible during use. The set is also Tamiya kit compatible, which makes it a practical radio option for many workshop and upgrade projects. Included are a 2-channel 2.4GHz transmitter and a 4-channel 2.4GHz receiver. 14 years marks the recommended age. 4 AA batteries are required separately, so the radio can move straight into bench setup, model installation and the first tuning session once the power supply is in place.  Warning! Not suitable for children under 14 years.

RC remote controls

FS Reflex Stick II, RC remote control, 6-channel

€109.99

The FS Reflex Stick II brings 2.4 GHz control and a classic dual-stick layout to RC vehicles and boats, with 6 channels operated independently through 2 joysticks, 1 ON/OFF/ON button and 1 ON/OFF/ON switch. Its FHSS system uses Frequency Hopping Spread Spectrum for radio transmission, while the included 6-channel receiver completes the core control package. The radio system runs at 6 V from 4 AA batteries and supplies the BEC receiver with 4.8 - 6 V. Servo reverse on 2.4 GHz changes the direction of assigned channels when a servo reacts opposite to the intended command, and the trim function helps dial in channel response with greater precision. A Graupner J/R plug system supports connection within compatible RC setups. The integrated charging socket adds a direct charging connection within the system. Full compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units makes the set a strong match for expanded truck and function-model installations. On the bench, the 6-channel layout supports coordinated setup of steering, throttle and auxiliary functions before the first run. At the lake or on the track, the dual-stick format and extra switching inputs suit models that need more than basic steering and speed control. 4 AA batteries are required separately.

RC remote controls

FS Reflex Stick Multi Pro, RC radio, 14CH LCD

€159.99

The FS Reflex Stick Multi Pro LCD is a 14-channel 2.4 GHz RC radio system built for complex model setups that need more than basic steering and throttle control. With 2 control sticks, 4 pushbuttons, 4 ON/OFF/ON switches and 2 rotary potentiometers, it gives hobby users direct access to multiple functions on vehicles and vessels, from light and sound to winch, support legs, water pump and water monitor control. Its 15 model memories keep different configurations ready for repeated use across several RC builds. The blue backlit LCD supports menu-based setup and status checks, while the 2.4 GHz FHSS system provides stable signal handling in the 4.8 - 6 V operating range. Servo reverse and trim functions are available for channels, and steering setup can be refined further with Dual Rate for servo path limitation, EPA for servo travel limiting and EXP for response adjustment. The system is also fully compatible with TAMIYA MFC 01/03 and DMD units. A failsafe function adds a defined response if signal transmission is interrupted. Included are a 14-channel 2.4 GHz transmitter, a 14-channel 2.4 GHz receiver and a multilingual handbook. 4 AA batteries are required separately for the transmitter. The Graupner-J/R plug system supports integration into compatible RC electronics, making this radio a strong choice for multi-function trucks, working models and other feature-rich RC machines.

RC remote controls

FS Reflex X1, 2.4 GHz radio system, 2-channel

€46.99

The FS Reflex X1 brings classic wheel-style RC control to cars and kits that need precise 2.4 GHz radio handling. Its 2 fully proportional channels work through a side steering wheel and trigger layout, so steering and throttle inputs can be adjusted smoothly across the full control range instead of switching between fixed positions. At the transmitter, servo reverse is available on both channels to invert steering or throttle direction when a model setup requires it. Separate trim functions for steering and throttle help correct the neutral position, and dual rate for both channels limits servo travel for a more measured response. The transmitter operates on 4.8 to 6 V and includes a charging socket with the positive pole inside. An LED battery display shows the transmitter status at a glance during use. The included 4-channel mini receiver measures 36 x 25 x 15 mm, uses the J/R Uni connector system, and supports receiver power up to 11 V without a BEC. This radio system suits Tamiya kit compatible setups and other RC vehicle builds that need compact receiver dimensions and adjustable control behaviour. A 2-channel 2.4 GHz transmitter, a 4-channel 2.4 GHz receiver and a handbook are included. 4 AA batteries are required separately.

RC remote controls

Reflex Stick Multi Pro, RC radio system, 14-channel

€129.99

The Reflex Stick Multi Pro brings 14-channel control to demanding RC setups with an interference-free 2.4 GHz FHSS radio system and a layout built for models that need more than basic steering and throttle. In model trucks, boats or construction machines, the combination of 4 proportional channels and 10 switching channels supports detailed command over driving and auxiliary functions from one handset. The transmitter operates on 4.8-6 V from 4 AA batteries, and the receiver uses a 4.8-6 V power supply. Trim is handled by sliders, which supports compatibility with TAMIYA MFC 01, 02 and 03 units as well as the DMD unit. The Graupner J/R plug system supports straightforward receiver connection within many hobby-grade installations. A charging socket with positive pole inside is built into the transmitter, and the LED battery status display keeps the power level visible during running sessions. This RC radio system suits multi-function models where separate switching and proportional control need to work side by side, such as scale trucks with light and sound modules or boats with added onboard functions. The included 14-channel receiver completes the core radio set, while 4 AA batteries are required separately.

Remote-controlled systems

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€134.99

The Reflex Wheel Pro 4 set brings core RC electronics together in one 2.4 GHz package built around a 4-channel pistol-grip transmitter, matching mini receiver, 6 kg metal-gear servo and brushless set. The transmitter uses 2 infinitely variable fully proportional channels and 2 additional switchable channels, opening the door to steering, throttle and extra vehicle functions from a single handset. Its LCD interface supports direct setup work for hobby-grade driving, with servo reverse on channels 1 and 2, trim for throttle and steering, dual rate adjustment, Expo and ABS functions, and 15-model memory for running more than one vehicle without rebuilding settings each time. Channel 3 can be programmed as a switch or button function, while channel 4 uses a 3-level switch. An LED battery status display keeps the transmitter power level visible during use. The transmitter operates at 3.6-4.5 V, and the receiver power supply is rated at 3.5-10 V without a BEC. On the vehicle side, the waterproof nano receiver and compact electronics suit tight chassis layouts, while the brushless set adds the drive hardware needed for responsive running. The included instructions complete the set. With 14 Years as the stated age marking, this package fits hobby sessions focused on tuning steering feel, throttle response and auxiliary functions for track, touring or general RC driving.  Warning! Not suitable for children under 14 years.

RC remote controls

FS Reflex Stick Pro 3.1, RC transmitter, 2.4 GHz

soon available again

The FS Reflex Stick Pro 3.1 brings classic stick-transmitter handling to 2.4 GHz RC control, pairing 2 fully proportional channels with gradual response for measured steering and throttle inputs. With its 4.8-6 V operating voltage from 4 AA batteries, the radio system is set up for hobby use where clear control and direct adjustment matter at the bench and on the track. Channel 1 features dual rate to limit servo travel when a model needs a narrower steering range, while channels 1-2 add trim and servo reverse for matching direction and neutral position to the installed setup. The included 4-channel receiver expands the system beyond the transmitter name alone and connects through the Futaba/Graupner J/R plug system. A fail-safe function adds a concrete control safeguard if signal transmission is interrupted, and the LED battery status display shows the transmitter power state at a glance. The charging socket with positive pole inside adds a dedicated connection point to the radio unit itself. In use, the layout suits model-building enthusiasts who prefer stick control for boats, vehicles or other compatible RC builds with 2-channel operation. The combination of receiver, adjustment functions and 2.4 GHz radio link supports setup work, fine correction and regular driving sessions without turning the transmitter into a one-setting system.

RC remote controls

2K remote control NemeSys

only available from customer service

2-channel remote control for the NemeSys 500404314

Remote-controlled systems

FS 15K Reflex Stick Pro 4, RC remote control

available in stores

The FS 15K Reflex Stick Pro 4 LCD-MFC 2.4GHz brings broad channel control and precise radio setup to complex RC builds. With 15 controllable channels, a 2.4 GHz FHSS system and a range of up to 150 m, this RC remote control suits functional models that need more than basic steering and throttle, whether on the workbench or out in operation. The included 15-channel receiver is compact and lightweight, which helps when space inside a model is limited. A blue backlit LCD display keeps key settings visible, while 15 model memories store different vehicle setups in one unit. Channels 1-4 can be adjusted with dual rate, EPA and EXP, and servo reverse with trim function supports accurate channel setup across the system. The transmitter operates at 4.8 - 6 V and uses 4 AA batteries. Graupner J/R connector compatibility adds flexibility when integrating existing RC components. Full compatibility with the Tamiya MFC sound unit allows its functions to be controlled directly via buttons, which is especially useful in detailed truck and functional model layouts. New stick units with sensitive mechanics, 3-position toggle switches, 3-position push buttons with centre position and height-adjustable CNC-milled aluminum sticks give the control layout a more tailored feel during longer driving sessions. A receiver, instruction manual and transmitter are included.

RC remote controls

REFLEX-S transmitter 2023

only available from customer service

RC remote controls

REFLEX-S transmitter with ESC/RX unit 2023 TAM

only available from customer service

RC remote controls

FS Reflex Stick Pro 3.1 2.4G LCD 4 Ch

available in stores

The FS Reflex Stick Pro 3.1 2.4 GHz LCD (500500085) is a compact 4-channel remote control for model builders who demand precise control. Two infinitely variable, fully proportional channels, 15 model memories, servo reverse and trim, two additional switching channels, dual rate, EPA, EXP and failsafe offer variable fine adjustment. Operation 4.8-6 V (4×AA), charging socket, Graupner J/R plug; the 4-channel receiver no. 500501533 is recommended.

RC remote controls

Reflex Stick Truck-Set 2.4G, RC set, 6-channel

available in stores

The Reflex Stick Truck-Set 2.4G brings the core electronics for an RC truck into one coordinated package, centered on a 6-channel 2.4 GHz stick transmitter and matched receiver. With 2 servos, a truck control unit, truck motor, LED truck light, a 7.2 V 2100 mAh battery pack and an Expert Charger 1 A, the set covers the main control, drive and lighting functions needed for a model truck layout. The radio system uses FHSS transmission, a frequency-hopping signal method that supports a steady connection between transmitter and receiver. Servo reverse and trimming are available on all channels, which helps align steering direction, throttle response and added functions to the truck's installation. The transmitter operates on 4.8 to 6 V from 4 AA batteries, and the receiver power supply is also specified at 4.8 to 6 V. A Graupner-J/R plug system is stated for the connections, giving the set a defined interface for compatible RC components. On the bench, the included electronics suit a fresh truck build as well as a replacement setup for an existing model. Once installed, the combination of radio control, motor drive, steering servos and LED lighting supports realistic truck running with controlled manoeuvres and added light functions during operation.

RC remote controls

Reflex Wheel Start, radio system, 2.4 GHz

available in stores

The Reflex Wheel Start radio system brings 2.4 GHz control, a compact 3-channel layout and a classic wheel transmitter format into one setup for RC vehicle use. The grey handheld transmitter works with a matching 3-channel mini-receiver, creating a focused control package for steering, throttle and an additional channel. Its fully proportional channels allow gradual input instead of simple on-off commands, so steering corrections and throttle changes can be fed in with more precision. Servo reverse changes the direction of the channel output when a steering or throttle function needs to be matched to the installed electronics. Separate trim settings for steering and throttle help centre the response, while dual rate on both channels limits servo travel for a more controlled setup range. The transmitter operates on 4.8 to 6 V, and the receiver can be powered with up to 11 V without BEC. The Uni connector system supports Futaba and Graupner-J/R compatibility. Included are a 3-channel 2.4 GHz transmitter, a 3-channel mini-receiver and instructions. The 14 years marking is stated in the product data. This radio set suits hobby workbench setups, replacement installations and fresh RC vehicle builds where compact receiver dimensions and direct wheel-style control are part of the plan.  Warning! Not suitable for children under 14 years.