Model building & model vehicles
Model motorcycles
1:9 Triumph
510007402€41.99
Article number: 510007402 Product: 1/9 Triumph Model Dim.: 23,1 cm Decals for 4 versions. At the start of the 2nd WW, Great Britain did not have all the technical equipment needed for such a conflict, therefore a lot of vehicles were ordered urgently. Motorcycles, mainly used by the well known DR "Dispatch Riders" for communication between different units, were converted from civilian bikes with small changes, like military color and the addition of frames for the canvas bags. Triumph proposed in short time the model 3HW, based on the civilian "Tiger 80", with an overhead valve engine and parallel forks. This model served on all fronts where the British Armed Forces fought, such as Africa, Europe and Asia. After 2nd WW these motorcycles were delivered to many other nations, such as Italy and Greece, where the Triumphs served for a long time thanks to their reliability and robustness. Deatailed plastic kit of model Triumph in scale 1:9
Model tanks
1:35 BMW R 75 with Side Car
510000315€11.99
Article number: 510000315 Product: 1:35 BMW R 75 with Side Car Model Dim.: 6,6 cm Contains 3 figures. Decal for one version. The new German army made use of the experiences collected in World War I to realize their modern reconstruction based on motorization. In spite of the limitations of the Treaty of Versailles able commanders introduced civilian vehicles into the army, thus creating a motorized mentality. In 1940 already, a battalion consisting of 3 to 4 companies each equipped with 52 motorcycles with sidecars and 4 motorcy-cles (single), was integrated into the motorized infantry and the armored divisions. Moreover, motorcycles were present in nearly all other Wehrmacht units, especially with the reconaissance units and the command, as well as the pioneer and the supply units. Produced in 16.500 units, the BMW R 75 together with the Zijndapp KS 750 formed the nucleus of the motorized units on all theatres of operations, especially in Africa and in Russia. The motorcycle was armored with an MG 34 mounted on the sidecar. On the road, it reached a maximum speed of 92 Km/h.
Model tanks
1:35 Ger. Sd.Kfz.167 Sturmgeschütz IV
510000223€30.99
Article number: 510000223 Product: 1:35 GER. Sd.Kfz.167 Sturmgeschütz IV The Sturmgeschütz IV was developed on the chassis of the Panzer IV medium tank to provide the German army with an assault gun capable of effectively serving as a tank destroyer in the later stages of World War II. The Stug IV was equipped with a Stuk40 75mm L/48 high-velocity gun installed in a casemate, protected by armored mantlet, capable of penetrating the armor of major enemy armored vehicles. Distributed to units in the early months of 1944, it supplemented and often replaced the Stug III assault gun, which had experienced a sudden decrease in production in 1943 due to increasingly frequent Allied bomber raids on German industrial areas. Widely deployed on the Eastern Front, the Stug IV was also utilized by armored units and anti-tank detachments of the Wehrmacht in Normandy, where its low profile proved to be particularly difficult to identify in the hedgerows of the French countryside. Warning! Not suitable for children under 14 years.
Model tanks
1:35 German Truck 3to. TYPE S
510000216€26.99
Article number: 510000216 Product: 1/35 German Truck 3to. TYPE S Model Dim.: 17,1 cm Registered by the Wehrmacht under the designation LKW 3,6-36 S 3t Blitz, this truck was the typical example of that practice of unification adopted in 1938 for the construction of civil transport means convertible into military vehicles. Actually, this truck - OPEL without BLITZ - was manufactured for commercial use featuring more or less the same characteristics.
Model tanks
1:35 Kfz. 69 Schwimmwagen
510000313€12.99
Article number: 510000313 Product: 1/35 Kfz. 69 Schwimmwagen Model Dim.: 10,9 cm including 3 figures Decals for one version As the Volkswagen 82 (Kubelwagen) proved very successful during the campaign in Poland, it was necessary to produce everincreasing numbers of this vehicle. Later, Ferdinand Porsche developed an amphibian version of this car, called the Schwimmwagen. The light weight of this vehicle (about 1/2 ton) permitted crossing of muddy areas, since only two men were sufficient to keep this vehicle moving. For reconnaissance and liaison missions, water had to be crossed frequently, which was impossible with other vehicles.
Model tanks
1:35 M-113 APC
510006753€29.49
The M113 can be considered one of the most famous APCs (Armoured Personnel Carriers) in history. It was developed in the late 1950s and early 1960s with the specific purpose of transporting a fully armed and equipped infantry squad with a good level of protection as close as possible to the combat zone. In addition to the tactical transport of the infantry squad, the M113 could provide close support to the troops through its onboard weapons, which, in the early versions, were limited to a 12.7 mm Browning M2 machine gun. First deployed in Vietnam, it became one of the most widely used armored vehicles in the world, with over 80,000 units produced. Reliable and robust, with good performance across all types of terrain, it was employed in various versions by numerous armed forces. Detailed plastic kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 Motorcycle side car Zündapp KS750
510000317€11.99
Article number: 510000317 Product: 1:35 Motorcycle side car Zündapp KS750 Model Dim.: 6,6 cm CONTAINS 3 FIGURES The Treaty of Versailles forbade the reconstruction of the German army. Nevertheless, its commanders evaded the obstacle by introducing vehicles of the civil production, which was not subject to any limitations. Thus they set up entire companies equipped with motorvehicles, developing in this way a "motorized mentality" among the crews. The Zündapp. with a production total of 18.000 units due to its structure which guaranteed easy and economical handling - was considered one of the most modern accomplishments of the age in the field of motorcycle construction. Because of its extraordinary qualities, the Zündapp could follow and escort the tank units of the Wehrmacht and the Waffen-SS to all theatres of operations, especially in Russia, since the side car was even furnished with heating for hands and feet of the man. Zündapps were distributed to all units of the armed forces, Only after 1943, they were replaced by 4-wheel vehicles. Detailed plastic kit of model Motorrad-Gespann Zündapp KS750 in scale 1:35
Model tanks
1:35 Sd. Anhänger 51
510006450€12.49
Article number: 510006450 Product: 1:35 Sd. Anhänger 51 Model Dim.: 7,6 cm CONTAINS 2 MODELS The Sd Anhänger 51 trailer could easily be used by a large number of Wehrmacht vehicles. The trailers have been developed to be used as ammo carriers and they were typically associated to anti-aircraft half-tracks armed with 20 mm Flak guns. During the Military campaigns the trailers were often fully loaded with any kind of materials. The lower "U" frame was extremely robust and suitable to be used on road and off road. Detailed Plastic Kit of model Sd. Anhänger 51 in scale 1:35
Military aeroplane models
1:48 FIAT CR.42 Falco Assa./Nig. Fighter
510002842€30.99
Starting from the great success of the C.R. 32 "Freccia" biplane, which proved its reliability and operational efficiency during the Spanish Civil War, Fiat developed the new C.R. 42 "Falco" at the end of the 1930s. The new single-seat biplane fighter retained the fixed landing gear and open cockpit of its predecessor but introduced several innovations, such as an entirely aluminum and steel structure covered with metal and fabric. Its air-cooled radial engine, the Fiat A.74, allowed the C.R. 42 to reach a top speed of 400 km/h. The aircraft was characterized by exceptional maneuverability, highly appreciated by pilots, but suffered from the inherent limitations of the biplane configuration, which hindered its operational performance compared to more modern and powerful monoplane fighters. Detailed plastic kit Warning! Not suitable for children under 14 years.
Model figures
1:72 Union Artillery
510006038€10.99
Article number: 510006038 Product: 1:72 Union Artillerie In the summer of 1863, the Confederate army led by Lee played for keeps by sending a large contingent to the North, up to Pennsylvania. It clashed with the Union army at Gettysburg, where the biggest battle ever to be fought on American soil took place. After three days of desperate struggle, the Confederates had to admit their defeat. At Gettysburg, the Potomac army Union artillery contributed to contain the Confederate advance, affecting the outcome of the battle. Contains: 3 riders 10 figures 8 horses 1 covered wagon cannon
Model figures
1:72 Union Infantry (Amer. Civil War)
510006177€10.99
Article number: 510006177 Product: 1/72 Union Infantry (Amer. Civil War) THE BOX INCLUDES 50 FIGURES. The Union infantry has held, during the Civil War period, the weight of the most famous battles (Bull Run, Antietam, Gettysburg) suffering a very high number of losses. The uniform was characterized by the typical blue jacket. The officers often wore a tailor-made longer coat (redingote). Detailed Plastic Kit of model Union Infantry (Amer. Civil War) in scale 1:72
Model railways
1:87 Locomotive BR41
510008701€19.99
Article number: 510008701 Product: 1:87 Locomotive BR41 Model Dim.: 27,5 cm From 1936, within the building programme for the German National Raiways (DRG), the BR 41 class of "standard" locomotives was developed for fast good trains. During the trial period the BR 41 received the nickname "Ox loco" because it was used for hauling fast cattle trains. Subsequntly, a total of 366 of the BR 41 locomotives were built, split among almost all the German locomotive builders. The BR 41 was designed as a so-called multi-purpose locomotive. In addition to its proper application – hauling express goods trains – its maximum speed of 90km/h enabled it to be used for fast and even express passenger trains. HO/1:87 Scale
Model railways
1:87 Locomotive BR50
510008702€19.99
Article number: 510008702 Product: 1:87 Locomotive BR50 Model Dim.: 26,6 cm The BR50 was developed from 1937 onwards as a powerful goods hauling "standard" locomotive for use on branch lines. With a total of 3164 locomotives, produced by almost all German builders beetween 1938 and 1945, the BR50 was one of the most widely used steam locomotive classes in Germany. Due to the war, the last series was technically simplified and designated BR50 UK (Umbau Kriegslokomotive). The BR50 was developed to replace obsolete steam locomotives on branch lines. At 16t, the low axle load of the BR50 made it suitable for universal use. HO/1:87 Scale
Model motorcycles
1:9 WLA 750 US Military Motorcycles
510007401€51.99
Article number: 510007401 Product: 1/9 WLA 750 US Military Motorcycles Mod.Dim.: 27,7 cm This impressive motorcycle, built in the late 30s to the requirements of the American Police forces, and, in limited quantities, for the civil market, was used during the 2nd World War also by the American armed forces. Very sturdy and reliable, this motorbike was used by the military Police for surveillance, and by couriers for rapid delivery of messages between front line units, thanks to its good road-holding and the performance of its powerful engine. Detailed Plastic Kit of model WLA 750 US Military Motorcycles in scale 1:9
Model tanks
1/35 Sd.Kfz.251/1 Ausf.D w/Night Vision
540006984€85.05
Article number: 540006984 Product: 1:35 Sd.Kfz.251/1 Ausf.D w/Night Vision The Sd.Kfz.251 Ausf.D with Night Vision Falke was a special variant which was equipped with specialized night vision equipment, the vehicle was designed for reconnaissance and other missions at night and in low-light conditions. The key feature of it was its night vision equipment, which included a range of infrared and ultraviolet lights, as well as a specialized periscope that allowed the crew to see in the dark. Despite its advanced technology, this special variant was produced in limited numbers due to the high cost of the specialized equipment and the difficult production conditions in Germany during the war. The kit includes Magic tracks and a set of early version tracks. Additionally, a figure set of four Nachtjager soldiers is offered for free. Valuable metal width indicators and an array of photo-etched parts are also available to enhance the level of detail in the model. Detailed Plastic Kit
Model car kit
1:12 Alfa Romeo 8C 2300 Monza Nuvolari
510004706€169.99
Article number: 510004706 Product: 1:12 Alfa Romeo 8C 2300 Monza Nuvolari Model Dim.: 32,0 cm 100% NEW MOULDS - Colors Instructions Sheet - Steering wheels - Realistic suspension - Highly detailed engine - Rubber tires - 300 plastic parts - 30 Chromed parts - Photoetched parts - Opening cowling - Screws, tubes, rope and nylon net
Model car kit
1:12 Alfa Romeo 8C/2300 1931-33
510104708€169.99
Article number: 510104708 Product: 1:12 Alfa Romeo 8C/2300 1931-33 Model Dim.: 32,0 cm Colors Instructions Sheet - Steering wheels - Realistic suspension - Highly detailed engine - Rubber tires - 320 plastic parts - 30 Chromed parts - Photoetched parts - Opening cowling - Screws, tubes and nylon net The Alfa Romeo 8C can be considered as one of the most famous sports cars of the 1930s. The car's name derives from the engine adopted: an 8-cylinder in-line supercharged engine with a displacement of 2,336 cc. The Alfa Romeo could be considered the "state of art" for technology, innovative solutions and performances. Characterized by an impressive reliability and driveability the "8C" achieved significant victories in international car racing competitions. It linked its name to the famous Italian driver Tazio Nuvolari that won, among the others, the Targa Florio race in Sicily and the prestigious Italian Grand Prix at Monza. This last victory gave the "Monza" name to the twin seater GP car. From the racing version, a production batch of almost 200 vehicles was produced for the private markets and to be used on the normal road.To celebrate the 110th anniversary of the famous Italian manufacturer we are releasing the two-seater Sport version of the 1930’s. The car was distributed at that time via the Alfa Romeo sales network to those customers wealthy enough to purchase the most successful sports car of the period. Detailed plastic kit in scale 1:72
Model car kit
1:12 Bugatti 35B Roadster
510004713€169.99
Article number: 510004713 Product: 1:12 Bugatti 35B Roadster The Bugatti Type 35 is one of the most iconic and revered racing cars in motor racing history, both technically and competitively. Ettore Bugatti's masterpiece was a unique mix of engineering skill, design, elegance, speed and its relatively light weight. Produced during the 1920s, it won an incredible number of races in both "road" and "on track" competitions. The Bugatti was in fact specifically designed for the world of racing, which included the introduction of technical and mechanical solutions for the car that made it ideal for the racing circuits of the period. Aesthetically, it was universally known and recognisable by the unmistakable shape of the horseshoe-shaped radiator which was a key design feature of Bugatti as a car manufacturer. Due to its 2,263 cm3 8-cylinder engine with a four-speed mechanical gearbox and equipped with a volumetric compressor, the Bugatti Type35B was able to attain a top speed of 210 km / h. In particular, the Bugatti 35C, due to its perfect balance between performance and handling, can be considered among the best "Type35" ever made. Detailed plastic kit Warning! Not suitable for children under 14 years.
Model car kit
1:12 Bugatti Type 35B
510004710€169.99
Article number: 510004710 Product: 1:12 Bugatti Type 35B The Bugatti Type 35 is one of the most iconic and revered racing cars in motor racing history, both technically and competitively. Ettore Bugatti's masterpiece was a unique mix of engineering skill, design, elegance, speed and its relatively light weight. Produced during the 1920s, it won an incredible number of races in both "road" and "on track" competitions. The Bugatti was in fact specifically designed for the world of racing, which included the introduction of technical and mechanical solutions for the car that made it ideal for the racing circuits of the period. Aesthetically, it was universally known and recognisable by the unmistakable shape of the horseshoe-shaped radiator which was a key design feature of Bugatti as a car manufacturer. Due to its 2,263 cm3 8-cylinder engine with a four-speed mechanical gearbox and equipped with a volumetric compressor, the Bugatti Type35B was able to attain a top speed of 210 km / h. It was produced in limited numbers until 1930. Detailed plastic kit
Model car kit
1:12 Bugatti Type 35B T.F1929/Mon.1930
510004716€169.99
The Bugatti Type 35 is among the most iconic and significant cars in the history of motorsport. A masterpiece by Ettore Bugatti, it represents an outstanding blend of engineering expertise, design, elegance, lightness, and speed. Produced during the 1920s, it achieved an extraordinary number of victories in both road and track competitions. Specifically designed for the racing world, it featured technical and mechanical solutions that made it ideal for the circuits of its era. Among its notable triumphs are the 1928 Targa Florio and the 1930 Monaco Grand Prix. From an aesthetic perspective, it was distinguished by the unmistakable horseshoe-shaped radiator grille, a signature of the Bugatti brand. Powered by an 8-cylinder 2,263 cc engine paired with a four-speed manual gearbox and equipped with a supercharger, the Bugatti Type 35 was capable of reaching a top speed of 210 km/h.
Military aeroplane models
1:12 F-104G Cockpit
510002991€34.99
Article number: 510002991 Product: 1:12 F-104G Cockpit Model Dim.: 14,7cm/9,0 cm 124 parts - Fully detailed real F-104 cockpit controls - Fully detailed Martin Baker Mk.I Q ejection seat - Complete cockpit dials decals - Adhesive acetate silk seat belts - Pilot’s helmet and oxygen mask - Pilot’s visor, gunsight and radar scope clear parts The Lockheed F-104 Starfighter is one of the most renowned fighters in aviation history and also the one with the longest operational service. Its history began at the end of the ‘50s and ended with some air forces in the mid-2000s. Its unique airframe, with slender fuselage and very little wing surface, made this aircraft ideal in an interceptor role. Due to the thrust of its General Electric J79-GE-11A afterburning turbojet engine it could exceed Mach 2,2 with a first class rate of climb. This scale model kit allows modelers to recreate the famous "Starfighter" cockpit with the typical internal layout of the ‘50s and ‘60s fighters, which was ‘home’ to many former NATO pilots. The fine detail of the instrument panel typical of the period, is matched by the highly accurate reproduction of the Martin-Baker ejection seat. Detailed plastic kit in scale 1:12
Model car kit
1:12 Fiat 500 Upgraded Edition
510004715€124.99
Article number: 510004715 Product: 1:12 Fiat 500 F Upgraded Edition The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. Furthermore the new car should be easy to drive, even in the city traffic, and provide very low running costs. The "Fiat 500" was released on the market in July 1957 and it was immediately a success. In 1965 was introduced the 500F, the version with the largest number of units produced. Easily recognizable for the front-hinged doors, in line with the new laws, the Fiat 500F adopted several technical and aesthetic improved solutions as the new frame and the wider windscreen. The Fiat 500F is, still today, the most "classic" version of the whole 500 production and it remains in the heart of a huge number of car fans. Warning! Not suitable for children under 14 years.
Model car kit
1:12 Fiat 500F (1968 version)
510004703€129.99
Article number: 510004703 Product: 1:12 Fiat 500F (1968 version) Model Dim.: 25 cm 100% new moulds - Highly detailed model - Opened or closed top - Opening car doors - Front and rear opening bonnets - Steering wheels - Working suspensions - Rubber tires - Photoetched and chromed parts The model can be realized in the Anglo-Saxon version with right drive. The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. Furthermore the new car should be easy to drive, even in the city traffic, and provide very low running costs. The "Fiat 500" was released on the market in July 1957 and it was immediately a success. In 1965 was introduced the 500F, the version with the largest number of units produced. Easily recognizable for the front-hinged doors, in line with the new laws, the Fiat 500F adopted several technical and aesthetic improved solutions as the new frame and the wider windscreen. The Fiat 500F is, still today, the most "classic" version of the whole 500 production and it remains in the heart of a huge number of car fans. Detailed plastic kit of model Fiat 500F (1968 version) In scale 1:12
Model car kit
1:12 FIAT 806 Grand Prix
510004702€169.99
The model "Fiat 806 Grand Prix" in scale 1/12 has a length of about 303 mm. UPGRADE PROTAR MOULDS The Fiat 806 Grand Prix adopted significant innovations for its time. In fact, the Fiat 806 was the "progenitor" of the modern Formula One racing cars. Developed and produced by FIAT, the Italian automobiles manufacturer, in 1927, it could be considered the first Grand Prix car ever built before. Thanks to its 180 HP 12 cylinders engine, the Fiat 806 was able to reach and even exceed the speed of 240 Km/h. However, the most important innovations were made in the development of the chassis, mechanics and bodywork. In fact, the engine and gearbox unit was located between the two chassis bars in order to optimize the performance and the drivability. The Italeri model is unique and very detailed (over 400 pieces to be assembled). The bonnet can be open to view the highly detailed engine. It has working steering, soft rubber tires, photo etched parts and little metallic accessories (screws, nuts, springs, etc).
Model car kit
1:12 FIAT Mefistofele 21706c.c. 1923-25
510104701€189.99
Article number: 510104701 Product: 1:12 FIAT Mefistofele 21706c.c. 1923-25 Model Dim.: 45 cm Upgrade Protar Moulds Fiat Mefistofele, the Queen of World Land Speed The one-off racing car "Eldridge", derived from the old Fiat SB4 chassis, became known as Mephistofele for the infernal noise emitted by its powerful aircraft 6-cylinders in-line engine, giving a capacity over 20,000 cm3, not attenuated by exhaust mufflers kept "free" to provide the most significant performance. On 12th July 1924 in Arpajon, the Mefistofele, was able to reach, driven by its pilot and designer Ernest Eldrige, the amazing speed, for the time, of 146,01 miles per hour (over 230 Km/h) and broke the World Land Speed Record achieving an impressive result. The Mefistofele, was characterized by the high back bodywork able to contain the powerful Fiat A-12 liquid-cooled engine and for its structure especially made to achieve the speed record.
Model car kit
1:12 Lancia DELTA 16VHF integ Sanremo'89
510004712€189.99
Article number: 510004712 Product: 1:12 Lancia DELTA 16VHF integ Sanremo'89 The sporty version of the Lancia Delta road model - the "HF" 4WD - is an icon of rally cars. The Delta HF was produced in the second half of the 1980s and took part in the World Rally Championship from 1987 to 1988, won two world championship titles and took first place in numerous races such as the prestigious Monte Carlo Rally and that of San Remo. Its development, the Lancia Delta Integrale, took part in races until 1993, won another 5 world championship titles and consolidated the "Palmares" in the Italian company's off-road competitions. in many aesthetic details that made it more muscular, such as the enlarged fenders and new air inlets on the bonnet, the technology and engine of the HF Integrale have also been improved. The performance of the 1995 cc turbo engine, for example, has been increased to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and the early 90s and brought many famous drivers such as Miki Biasion, Didier Auriol or Juha Kankkunen to victory. Detailed Plastic Kit
Model car kit
1:12 Lancia Delta HF Integrale 16V
510104709€189.99
Article number: 510104709 Product: 1:12 Lancia Delta HF Integrale 16v The sporty version of the Lancia Delta road model - the "HF" 4WD - is an icon of rally cars. The Delta HF was produced in the second half of the 1980s and took part in the World Rally Championship from 1987 to 1988, won two world championship titles and took first place in numerous races such as the prestigious Monte Carlo Rally and that of San Remo. Its development, the Lancia Delta Integrale, took part in races until 1993, won another 5 world championship titles and consolidated the "Palmares" in the Italian company's off-road competitions. in many aesthetic details that made it more muscular, such as the enlarged fenders and new air inlets on the bonnet, the technology and engine of the HF Integrale have also been improved. The performance of the 1995 cc turbo engine, for example, has been increased to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and the early 90s and brought many famous drivers such as Miki Biasion, Didier Auriol or Juha Kankkunen to victory. Detailed plastic kit in scale 1:72
Model car kit
1:12 Mc Laren MP4/2C Prost / Rosberg
510104711€134.99
Article number: 510104711 Product: 1:12 Mc Laren MP4/2C Prost / Rosberg The McLaren MP4/2 was one of the most successful racing cars, securing the most victories in the history of Formula 1. In 1985, the MP4/2B made its debut equipped with a TAG Porsche engine, enhanced by two superchargers capable of attaining 850 hp and displaying aerodynamic designs less showy than the previous cars, and which were also compliant with the evolving new regulations of the period. The project’s engineering and design achievements were ratified by victory in the constructors’ and drivers’ world championships, due in equal measure to the extraordinary talent of driver Alain Prost. In 1986, the project was further enhanced by the MP4/2C version and Alain Prost was again confirmed as world champion. During this new season he was joined by another great Formula 1 talent, the Finn Keke Rosberg. The McLaren MP4/2 has a special place in the hearts and minds of Formula 1 enthusiasts and fans, winning three drivers' championships and two constructors' championships. Detailed plastic kit
Model car kit
1:24 Alfa Romeo Giulietta Spider 1300
510003653€37.99
Article number: 510003653 Product: 1:24 Alfa Romeo Giulietta Spider 1300 Model Dim.: 16,2 cm COLORS INSTRUCTIONS SHEET - DETAILED ENGINE - CHROME PARTS AND CAPOTE FOR CLOSED VERSION In 1962 the Alfa Romeo Giulietta Spider evolved with the adoption of some aesthetic improvements on the bodywork, some interior details and, the new 1.570 cm3 four cylinder engine able to release 92 Hp. Thanks to the new engine the Italian car was able to reach the max speed of 172 Km/h. The mechanical lay-out was based on the rear-wheel drive and four independent wheel suspension. The "Veloce" sport version was able to offer to the customers a powerful engine (112 Hp) with two carburetors and the adoption of the disk brakes on the frontal wheels. Detailed Plastic Kit of model
Model car kit
1:24 Audi Quattro Rally
510003642€36.99
Article number: 510003642 Product: 1/24 Audi Quattro Rally SUPER DECALS SHEET In 1980, during the Geneva Motor Show, the German car manufacturer presented to the public its new twodoor coupé called Audi Quattro. Produced for all the '80s the Italian name choosed by Audi (Quattro is the Italian word for "four") ine was pointed out the main feature and the most important selling point : the fourwheel drive. It was the first time that the 4x4 solution was adopted on a coupé with the goal to achieve high numbers in terms of production and sales on the market. The Audi Quattro was able to release good driving performance, thanks to its frontal longitudinal engine, and very good reliability on all type of road conditions. From the mass production a dedicated car for competitions was developed on 1981 and it debuted in the World Rally Championship, achieving good results. The success of "Quattro" cars is still existing today in fact the name has become a real "brand" that identifies all the range of Audi’s four wheel drive production. Detailed Plastic Kit
Model trucks
1:24 Australian Truck
510000719€61.99
Article number: 510000719 Product: 1:24 Australian Truck Mod.Dim.: 33,2 cm Australian outback truckers covering enormous distances on rugged and unsealed roads needs to equip their rigs with special modifications. They include a huge bull-bar (roo-bar), a sheet of wire mesh for windscreen protection, special dust filters, additional long range fuel tanks, heavy duty wheels, airconditioning and an array of different driving lights. Bulk goods are normally transported in Road Trains, which can have up to 3 trailers with a total length of over 31 metres.
Model car kit
1:24 B.M.W. 320 Gr. 5
510003626€36.99
Article number: 510003626 Product: 1:24 B.M.W. 320 Gr. 5 In 1976 the FIA, within the scope of motor racing competition, introduced a new Group 5 section reserved for "special" production cars. The new rules imposed a body width similar to that of normal series production, upon which however, it was possible to apply dimensionally larger mudguards in order to benefit from wider track widths and larger tires. BMW participated in Group 5 competitions with a dedicated version of its new flagship model, the E21 "320". A new aerodynamic profile was created that integrated the large fenders and it was also fitted with a powerful 300 hp engine. The car was successfully used by the official BMW team and also as a developmental platform for young, emerging drivers.
Model trucks
1:24 Cargo Trailer
510003885€61.99
Article number: 510003885 Product: 1:24 Cargo Trailer Model Dim.: 58,0 cm SUPER DECALS SHEET FOR 2 VERSIONS This latest-generation semitrailer is representative of much of Europe’s on-road haulage vehicles. Featuring an efficient braking system, side impact protection, a considerable load capacity, these trailers are used extensively and are produced by at least ten or so specialised companies, which provide a comprehensive range of variants to meet the specific needs of individual customers.
Model trucks
1:24 Container Auflieger 40Ft
510003951€58.99
Article number: 510003951 Product: 1:24 Container Auflieger 40Ft Model Dim.: 50,5 cm SUPER DECALS SHEET - COLOR INSTRUCTIONS SHEET The freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container in terms of size, volumes and loading capacity makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has become more effective and faster. Even the warehouses and stocking areas management became easier and more flexible. Detailed plastic kit in scale 1:24 Warning! Not suitable for children under 14 years.
Trailers & accessories
1:24 Curtainside Trailer
510003918€59.99
Article number: 510003918 Product: 1:24 Curtainside Trailer Model Dim.: 58,0 cm TRACTOR NOT INCLUDED IN THE BOX SUPER DELAS SHEET with tractor decals included NEW WHEELS During the last few years the Curtainside became more and more the standard trailer for various freight transport. Due Due to the possibility to slide the canvas sides, it is easy to load and unload merchandise. Our model represent a 3-axle trailer with frame protection and solid tail gates, as it is generally used all over Europe.
Model trucks
1:24 DAF 95 Master Truck Tractor Tr.
510000788€59.99
Article number: 510000788 Product: 1:24 DAF 95 Master Truck ZgM The 'Concept 95/380' has been, for some time, the flagship product in the renowned DAF manufacturer's lineup, representing a further development of the Space Cab series. It was recognized by the market as a significant evolution compared to its predecessors. Indeed, numerous technical and aesthetic improvements were developed and adopted, greatly appreciated by users of road industrial vehicles, especially for long-haul journeys. The soundproof cabin and advanced shock absorbers for the time provided top-of-the-market onboard comfort, and the powerful 6-cylinder ATI (Advanced Turbo Intercooling) engine ensured good performance with a particular focus on operating costs. Warning! Not suitable for children under 14 years.
Model trucks
1:24 DAF XF105
510003917€74.99
Article number: 510003917 Product: 1/24 DAF XF105 Model Dim.: 24,5 cm SUPER DECALS SHEET - ADHESIVE STENCIL - NEW CHROMED WHEELS - NEW TYRES This road haulage tractor by DAF is a restyled version of the successful previous series. Offering excellent reliability and a good standard of comfort on long-haul routes, the XF105 also features very good mechanical reliability and outstanding tengine performance under a wide range of conditions, in full compliance with the strictest environmental standards. Also, in the event of an accident, the cab provides the driver with an extremely high level of protection. The name "Smoky" comes from the race horse owned by the driver father (from here "Junior") which, used to winning, during the race was disappearing like a puff of smoke in front of his opponents. In a Wild West atmosphere, the horses are the protagonists in the airbrushed sides of his DAF XF 105 too.
Trailers & accessories
1:24 Dumper Trailer
510003845€57.99
Article number: 510003845 Product: 1:24 Dumper Trailer Mod.Dim.: 37,0 cm This great three axis trailer has been developed for earth and building debris transportation within construction sights. Equipped with high resistant steel chasse, it is capable to support stress on unpaved working areas. Characterized by a large tipping bucket capable of several tons payload. This trailer has installed with an efficient braking system enabling to guarantee maximum safety during transportation. It is further has a bucket covering system to eliminate loss of material risks while moving.
Trailers & accessories
1:24 European Tractors TYRES and RIMS
510003909€26.49
Article number: 510003909 Product: 1:24 European Tractors TYRES and RIMS 100% NEW MOULDS - DECALS SHEET INCLUDED Accessories suitable for European tractors only. THE BOX CONTAINS 7 TYRES + 7 RIMS : 2 front rims and tyres size 385/65 R22.5 - 5 rear rims and tyres size 315/80 R22.5 Deatailed plastic kit of European Tractors TYRES and RIMS in scale 1:24
Model car kit
1:24 Fiat 131 Abarth Rally OLIO FIAT
510003667€39.99
Article number: 510003667 Product: 1:24 Fiat 131 Abarth Rally OLIO FIAT The Fiat 131 Abarth evolved from the initial two-door sedan model. The Abarth development involved many interventions such as the adoption of a lighter chassis, larger wheel mudguards, air intakes on the bonnet and on the sides to optimize the mechanical cooling system. The Fiat 131 Abarth used an in-line front longitudinal 4-cylinder engine with a light alloy head and 4 valves per cylinder. Initial manufacturing began in 1976 leading to participation in the World Rally Championship where it won three constructors' championships, a FIA Drivers' Cup and a drivers' championship. It took part in international competitions until 1982 when it was replaced by Lancia brand cars. Some of its body liveries, associated with the sponsors of the period, have become iconic in the history of "off road" motor racing competitions. Detailed plastic kit in scale 1:32
Model car kit
1:24 Ford Escort Mk.II
510103655€36.99
Article number: 510103655 Product: 1:24 Ford Escort Mk.II Model Dim.: 16,7 cm The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. The product range was wide, declined in three Body styles (2 doors, 4 doors and 3 doors station wagon), five type of engines and a significant variety of settings and configurations. The Escort Mk 2 was mainly produced in the Ford Group German plants and achieved a good commercial success. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive Sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Detailed Plastic Kit of model Ford Escort Mk.II in scale 1:24
Model car kit
1:24 Ford Escort RS 1800 MK.II Lombard
510003650€36.99
Article number: 510003650 Product: 1:24 Ford Escort RS 1800 MK.II Lombard Model Dim.: 16,7 cm EXTRA CATALOGUE SUPER DECALS SHEET The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Successful results has been achieved. From 1975 to 1979 the Ford Escort RS 1800 won for five consecutive years the prestigious RAC (Royal Automobile Club) Rally, the most important rally event organized in the United Kingdom and an important milestone of the World Rally Championship. Among the others the team Mikkola Hannu - Hertz Arnee won the "Lombard" on 1978 and 1979 Detailed Plastic Kit of model Ford Escort RS 1800 MK.II Lombard RAC Rally in scale 1:24
Model car kit
1:24 Ford Escort Zakspeed Gr.2 D&W
510003664€37.99
Article number: 510003664 Product: 1:24 Ford Escort Zakspeed Gr.2 D&W The Ford Escort Mk 2 was launched on the market in 1975. It was a decisive evolution compared to the Escort Mk 1 presented at the 1968 Brussels Motor Show. The previous version retained the high quality mechanics but was completely revised in the design that he interpreted the aesthetic and stylistic taste of the 70s. In addition to the more functional versions, there was also an Escort Sport version characterized by a more aggressive look and a markedly sporty interior. Finally, the RS 1800 version with 115 HP twin-shaft engine was also presented, which formed the basis for the special version used in the Rally world championship and which achieved significant results. The iconic Zakspeed Team built and used a dedicated version of the Escort Mk 2 between 1977 and 1978. Detailed plastic kit in scale 1:24
Model trucks
1:24 Freightliner FLC
510003859€59.99
Article number: 510003859 Product: 1/24 Freightliner FLC Mod.Dim.: 32,5 cm This more than 50 year old US-truck manufacturing company has an excellent reputation for quality and beautiful design of their products. In 1981 Daimler-Benz AG, the parent company of Mercedes-Benz, one of the worlds biggest truck manufacturers, purchases the Freightliner Corporation. The company will continue all activities under the original Freightliner name. Daimler-Benz has also imported several models to Europe for demonstration purposes and truck shows. All Freightliner trucks have a common basic technical design, many are custom-built to the customers needs. The model is a Conventional FLC 12064T Tractor with a 475 HP Cummins-Diesel engine and a 13 speed Fuller-Roadranger Transmission.
Model trucks
1:24 Freightliner Heavy Dumper Truck
510003783€67.99
The renowned US Portland based company "Freightliner Trucks", which operates in the industrial vehicle sector and is owned by the automotive giant Daimler, is mainly known for being one of the key manufacturers of trucks used for "on road" transportation roles. However, it is also important to recognise the versatility and success over time, of those Freightliners that were dedicated to "heavy duties" jobs. In fact, market demand for "quarry and construction" vehicles saw strong growth in the late 1970s and early 1980s, subsequently impacting the production volumes of the main truck and heavy vehicle manufacturers. Freightliner designers have worked on the most suitable technical solutions to meet the needs of the construction market, namely, reinforced chassis and rear axles for greater payload, tough and sturdy tipping rear decks, optimized engines and transmissions for demanding loads and steep slopes.
Model trucks
1:24 Iveco HI-WY E5 "Abarth"
510003934€69.99
Article number: 510003934 Product: 1:24 Iveco HI-WY E5 "Abarth" Model Dim.: 25,4 cm SUPER DECALS SHEET FOR 2 VERSIONS - CHROMED ADHESIVE - CHROMED WHEEL RIMS - NEW TYRES - COLOR INSTRUCTION SHEET The Stralis Hi-Way is the latest evolution of the famous heavy duties truck produced by Iveco. The Stralis Hi-Way is characterized by several technological and aesthetic improvements compared to previous versions. The cabin offers a completely new design and is equipped with integrated electronic systems able to optimize the on-board comfort and to provide the highest safety standard. The evolution of the Stralis is also characterized by a completely new "powertrain" able to minimize the fuel consumption and the maintenance costs. The new engine strength is in fact to stay in line with the new Euro 5 anti-pollution regulation and to keep a very high operation effectiveness in terms of cost of ownership. In 2013 Iveco Stralis Hi-Way won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines. On 2017 Iveco announced that has supplied a Stralis Hi-Way, characterized by a dedicated livery, to Abarth Racing Team to support the logistic of the famous Italian sport brand. Detailed Plastic Kit of model Iveco HI-WY E5 "Abarth" in scale 1:24
Model trucks
1:24 IVECO Turbostar 190.48 Special
510003926€59.99
Article number.: 510003926 Product: 1:24 IVECO Turbostar 190.48 Special The Iveco Turbostar was an important commercial success for Italian manufacturer. Thanks to its characteristics of strength, reliability and performance, it achieved a significant position on the European truck market and it was the most widespread industrial vehicle in Italy in the late 80s.It was declined in numerous versions and adopted several outfitting to satisfy the specific transportation needs of the users. The version with the canvas deck was one of the most common version able to guarantee a great flexibility of transport of all types of goods. Another great advantage of the Iveco 190.42 was the loading capacity compared to the overall dimension. The payload / size ratio provided by 190.42 was an important factor to perform transportation duties outside of the motorways and even in the smaller urban area. Often an hydraulic rear platform to make easier the loading and unloading activities was added to the canvas version. The Turbostar enjoyed considerable commercial success thanks to the two-axle "road tractor" version, a feature which became a reference point for road transport in the 1980s. The wide range of engines available also ensured that the vehicle performed it’s industry tasks exceptionally well over all distances. Among the many versions produced, the famous 190.48 was equipped with a powerful 480 HP engine which delivered impressive performance levels. Detailed plastic kit in scale 1:24
Model car kit
1:24 Jaguar XJ 220 Race Car
510003669€39.99
The Jaguar XJ 220 became famous for its top speed record among production cars, reaching 350 km/h, held from 1992 to 1994. The project's origin is also quite interesting. It began from the ideas and creativity of Jaguar employees who were working on innovative and original projects, not included in commercial demands. From this initiative, the Jaguar XJ 220 was born, with the first production car being manufactured in 1991. Lightweight and extremely powerful, it delivered performance worthy of a true "top sports car" and featured an aerodynamic design with highly modern lines for its time. A version was also developed for the world of motorsports, and it participated in several GT races, including the famous 24 Hours of Le Mans, driven by renowned drivers of the era. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model tanks
1:24 Jeep Willys MB 80th Anniversary
510003635€37.99
Article number: 510003635 Product: 1:24 Willys Jeep MB "80th Anniversary" In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multipurpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II. Even after 80 years, the "Willys" is still considered today, to be the four-wheeled vehicle which is most symbolic of the American army during the Second World War, and thanks to its enthusiasts and collectors, there are many examples of the jeep, still in perfect working order. Detailed plastic kit
Model car kit
1:24 Lamborghini Diabolo
510103685€34.99
Article number: 510103685 Product: 1:24 Lamborghini Diabolo Model Dim.: 18,6 cm The Diablo was produced between 1990 and 2001. During this period, Lamborghini introduced several variations of the Diablo concept, the first being the Diablo VT (Visco Traction), which featured an all-wheel drive. The Diablo was destined to become the worthy heir of the renowned Miura and Countach. This newsupercar was wide, low and futuristic. And just like its predecessors, the Diablo soon became a favorite among car enthusiasts across the world. The Diablo models helped build the legend of Lamborghini and sold well. Almost 3,000 units across all series and variations found their buyers in those eleven years of evolution. The Lamborghini bosses had wished for a maximum speed of at least 320 kph, and the engineers made this wish come true: With a top speed of 325 kph and an acceleration from 0-100 in 4.5 seconds the Diablo claimed the pole position in the super sports cars segment. It delivered its power via a rear-wheel drive and came with a newly developed V12 engine. Four valves per cylinder, a computer controlled multi-point fuel injection and a displacement of 5.7 liters helped produce a maximum of 492 HP. Detailed plastic kit
Model car kit
1:24 Lancia HF Integrale
510003658€36.99
Article number: 510003658 Product: 1:24 Lancia HF Integrale Model Dim.: 16,0 cm COLOR INSTRUCTION SHEET The Lancia Delta HF four wheels-drive is considered an Icon of the Rally Competitions History. The Delta HF was produced in the second half of the 80s and participated in the World Rally Championship from 1987 to 1988 winning two world titles and achieving important results in a lot of competition as the Rallye de Monte-Carlo and the Rallye San Remo. The Lancia Delta Integrale was the evolution of the Delta HF. It was introduced in 1988 and dominated the World Rally Championship winning several constructors’ championship and an impressive number of competitions up to 1993. Updated in many aesthetic details that made it more muscular and aggressive, as the enlarged fenders and the new designed air intake on the engine bonnet, the Lancia HF Integrale was also improved in driving and engine performance. The 1995 cm3 turbocharged engine increased its power up to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and early 90s, bringing many famous pilots as Miki Biasion or Juha Kankkunen to victory. Detailed Plastic Kit of model Lancia HF Integrale in scale 1:24
Model car kit
1:24 Lancia LC2
510003641€37.99
Article number: 510003641 Product: 1:24 Lancia LC2 Model Dim.: 20,0 cm SUPER DECALS SHEET - COLOR INSTRUCTIONS SHEET The LC2 was built by the Italian manufacturer Lancia to compete in the World Sport Prototype Championship at the beginning of ‘80s. Characterized by a clean and elegant design able to optimize the aerodynamic performance, the Lancia LC2 adopted a Ferrari V8 twin-turbocharged engine, prepared by Abarth, with a displacement of 2,599 Cm3 (later increased to 3,014 Cm3). The car made its debut in 1983 competitions where it was able to compete in terms of speed and performance to the Porsche cars, reference point in racing competition at those time. However the lower level of reliability affected the results. A lot of Italian drivers raced on the Lancia LC2 before to became famous in Formula 1 racing as Patrese, Alboreto and Nannini. Detailed Plastic Kit
Model car kit
1:24 Land Rover Fire Truck
510003660€37.99
Article number: 510003660 Product: 1/24 Land Rover Fire Truck Length of the model 185 mm New Parts The "Land Rover" was certainly one of the most famous symbols of "Made in England" automobile production and is a real milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes realized on 1947. It has been characterized by the 4x4 traction system and by a robust and reliable design able to tackle the most difficult and challenging trails. The aluminum body provide lightness but, at the same time, more resistance against corrosions and more durable in time. In 1971, when the III Series was introduced, more than 1,000,000 of Land Rovers has been produced. Available in two versions: the "standard " one and the "long wheel base". Thanks to its extraordinary versatility was used in both military and civilian duties. Interesting the versions realized for the Fire Departments and made with the firefighting equipment. Detailed Plastic Kit
Model trucks
1:24 M-B Actros MP4 Show GigaSpace
510003935€74.99
Article number: 510003935 Product: 1/24 M-B Actros MP4 Show GigaSpace Length of the model 269 mm NEW CHROMED PARTS SUPER DECALS SHEET Actros is the commercial name for Mercedes-Benz heavy truck range. The Actros range has been introduced in 1995 and quickly achieved a significant commercial success as a suitable solution to perform long-distance haulage and heavy-duties haulage. The New Actros, introduced on the market in 2012, is the most update and innovative expression of the heavy truck Mercedes family. It is characterised by an advanced and modern design and the adoption of new Euro 5 and Euro 6 engines. The vehicle configuration has been designed and developed to guarantee the highest operational efficiency minimising the running costs. Among the several configurations available it is particularly interesting the long-haul high-roof cabin version, design to offer the highest standard of comfort on board for two drivers. The Actros is also a good starting base to create fantastic ShowTrucks with liveries and graphics characterized by a high visual impact that are real masterpieces on wheels. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model trucks
1:24 MAN 26.321 Formel 6 6X4
510000756€61.99
Article number: 510000756 Product: 1:24 MAN 26.321 Formel 6 6X4 MAN is one of the most famous and well-known manufacturers of heavy industrial and commercial vehicles in Europe. Throughout its long industrial history it has introduced many technological innovations which have become benchmarks within the heavy transport vehicle sector. The MAN 26.321 was fitted with the 6-cylinder "Formula 6" diesel engine which, at the time, was a forerunner of the adoption of advanced technology capable of optimizing power and minimizing consumption. Even the cab design was studied and developed in order to satisfy the requirements of modern truck drivers who were becoming more aware and attentive to on-board comfort and vehicle ease of use. Equally, design changes also incorporated aesthetic features such as large horns, aerodynamic appendages and the characteristic spoiler on the roof of the cab. In this version the frame was strengthened to allow the adoption and fitting of four rear wheels. Length of the model 270 mm Detailed Plastic Kit of model MAN 26.321 Formel 6 6X4 in scale 1:24 Warning! Not suitable for children under 14 years.
Model trucks
1:24 MAN F8 19.321 2Achs
510003946€61.99
Article number: 510003946 Product: 1:24 MAN F8 19.321 2Achs Model Dim.: 25,5 cm COLOR INSTRUCTIONS SHEET The F8, produced by the famous German manufacturer MAN, achieved important commercial results on the truck market. It was characterized by the successful union of the reliable "made in Germany" powertrain with the cabin designed and produced in France by Saviem. Generally it was equipped with a longitudinal 6-cylinders frontal engine and it was produced from the late sixties until the mid-eighties and can be considered a real icon of commercial and industrial vehicles of those years. Its great diffusion and flexibility generated the development of numerous chassis configurations and a lot of dedicated outfits. The 19.321 two-axle road tractor can be considered one of the most versatile models and has been used in various logistics and goods handling and transportation activities. Detailed plastic kit in scale 1:24
Model trucks
1:24 MAN TGX XXL D38
510003959€59.99
Article number: 510003959 Product: 1:24 MAN TGX XXL D38 The MAN TGX XXL has been acclaimed by the commercial and industrial vehicle sector for both its stylishness and also for its "character", which provides a combination of driving comfort, reliability and profitability. An aerodynamic profile reduces fuel consumption and optimizes vehicle efficiency. The XXL cabin features maximum on-board comfort and has been designed to be an integral feature of long-haul international transport activities. The range of engines available was developed to minimize consumption, reduce running costs and guarantee a longer operating life. An additional step forward was taken by MAN with the introduction of the new line of reliable 6-cylinder D38 diesel engines, which delivered up to 640 HP and released a maximum torque of 3,000 Nm, improving the engine's performance in all weather conditions.
Model trucks
1:24 MAN TGX XXL D38 E6 Edition
510003916€62.99
Article number: 510003916 Product: 1:24 MAN TGX XXL D38 E6 Edition Model Dim.: 25,7 cm UPGRADED MOULDS An interesting version of the famous German heavy truck characterized by an impressive, in perfect synergy with the design of the cabin, Arctic livery. The MAN TGX XXL is recognized by the commercial and industrial vehicles market as a reference point for its style and its personality. The development of the truck has been done taking in consideration the effectiveness and the performance in long range duties. The aerodynamic design of the truck is able to minimize the fuel consumption. Furthermore The XXL cabin offers maximum comfort on board and it can be considered an ideal solution for international long haul commercial activities. The range of engines has been developed to minimize the running and operating costs and ensure a longer working life. Detailed Plastic Kit of model MAN TGX XXL D38 E6 Edition in scale 1:24
Model car kit
1:24 Mercedes 450 SLC Rally d Bandama'79
510003632€37.99
Article number: 510003632 Product: 1:24 Mercedes 450 SLC Rally d Bandama'79 Model Dim.: 19,8 cm Super Decals Sheet The Mercedes SLC is a luxury coupe produced by the German car manufacturer between 1971 and the early 1980’s. Its development was based upon the earlier launched Roadster model and was characterized by a harmonious and elegant design. The 450 SLC was equipped with a 4520 cm3 V8 engine capable of 225 HP. This high performance was successfully combined with refined styling and the ‘Premium’ quality furnishings selected for the vehicle interior that reinforced the SLC luxury branding in the marketplace. The vehicle was further adapted from the mainstream consumer model to the production of a sports version for car rallying competitions. The chassis was the same, but the rally version introduced a roll-bar, competition rims and aluminium parts and components to reduce the overall weight. All of these factors contributed to increased performance and rallying successes such as the Mintex Rally victory in 1978. Detailed Plastic Kit
Model car kit
1:24 Mercedes 500 SLC
510003633€36.99
Article number: 510003633 Product: 1:24 Mercedes 500 SLC During the 1960s Mercedes-Benz began development of a line of sports cars which were characterized by high performance and also great attention to aspects of motoring that would meet the requirements of the expanding "luxury" car market sector. The acronym SL (Sport and Leicht), identifies the various models that over the years have evolved and been presented to the market. In the 1970s, the German automotive group launched the R107 and C107 series in the Roadster and Coupé versions, which went on to quickly achieve notable commercial success. Arising from the C107, the "top of the range" coupé SLC 500 evolved, the production of which, lasted for almost a decade. With a 4973cc engine capable of delivering 237 HP the Mercedes SLC 500 became a benchmark for the "premium" market, which in the 1970s, also saw the origin of some iconic models, which even now, capture the imagination and dreams of many collector and classic car enthusiasts. Detailed Plastic Kit
Model car kit
1:24 Mercedes Benz 300 SL Gull Wing
510003645€35.99
Article number: 510003645 Product: 1:24 Mercedes Benz 300 SL Gull Wing Length of the model 148 mm The Mercedes-Benz 300 SL was produced in 1954 by the German car manufacturer and it’s a masterpiece on four-wheels for design, elegance and luxury. The 300 SL, where the acronym stands for Sport Leicht, (Sport Light), adopted innovative solutions for the time. The Mercedes 2 door coupe had a tubular frame, a front 2.996 cc longitudinal engine connected to a 4-speed transmission and the rear drive. The maximum speed of 300 SL was 260 Km/h (162 mph). The real strength of the car, however, was in its innovative design and the adoption of the characteristic and eye-catching Gull-wing doors. Even today the Mercedes-Benz 300 SL is an icon of design and style of the period ant it is a real icon for collectors and fans. Detailed Plastic Kit
Model car kit
1:24 Mercedes Benz 540K
510003701€29.99
Article number: 510003701 Product: 1/24 Mercedes Benz 540K The model Mercedes Benz 540K in 1/24 scale has a length of about 243 mm. One of the most beautiful automobiles of its time, the Mercedes Benz 540K was built from 1936-39. One unit is still shown in various parts of the world by Mercedes for promotion purposes. The car had a 8-cylinder 5.4 l engine and weighed no less than 2300 kg. Maximum speed was a stunning 170 km/h. Its fuel consumption was 28 to 30 liter for 100 km.
Model trucks
1:24 Mercedes Benz Actros MP4 Gigaspace
510003905€69.99
Article number: 510003905 Product: 1:24 Mercedes Benz Actros MP4 Gigaspace Model Dim.: 25,5 cm 100% NEW MOULDS - TWO VERSIONS DECALS - NEW WHEELS - NEW RUBBER TYRES Actros is the commercial name for Mercedes-Benz heavy truck range. The Actros range has been introduced in 1995 and quickly achieved a significant commercial success as a suitable solution to perform longdistance haulage and heavy-duties haulage. The New Actros, introduced on the market in 2012, is the most update and innovative expression of the heavy truck Mercedes family. It is characterized by an advanced and modern design and the adoption of new Euro 5 and Euro 6 engines. The vehicle configuration has been designed and developed to guarantee the highest operational efficiency minimizing the running costs. Among the several configurations available it is particularly interesting the "GigaSpace", long-haul high-roof cabin version, design to offer the highest standard of comfort on board for two drivers. Thanks to its features, Actros Gigaspace can be considered one the best solution for international long-distance transport activities. Detailed Plastic Kit of model Mercedes Benz Actros MP4 Gigaspace in scale 1:24 Warning! Not suitable for children under 14 years.
Model trucks
1:24 Mercedes Benz SK Eurocab 6x4
510003924€59.99
Article number: 510003924 Product: 1:24 Mercedes Benz SK Eurocab 6x4 Length of the model 270 mm The Mercedes-Benz SK (Schwere Klasse) was produced by the renowned German automotive company from the late 1980s to the early 1990s. Available in various configurations, including the esteemed 6x4 chassis, which was enhanced by the introduction of the "Eurocab" cabin, featuring innovative and functional design elements. This cabin was characterized by a raised roof, improving onboard amenities, visibility, and driving comfort. Initially introduced on the 500 HP engine version, the new cabin was progressively extended to the rest of the lineup. Despite its increased height, fuel consumption costs were mitigated through meticulous aerodynamic research. It found extensive use in numerous commercial and industrial applications, enjoying significant commercial success. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model trucks
1:24 Mercedes-Benz 2238 6x4
510003943€56.99
Article number: 510003943 Product: 1/24 Mercedes-Benz 2238 6x4 NEW DECAL SHEET The truck 2238 S 6 x 4 has been, for long time, the reference point for heavy duties on long range of Mercedes. The truck had both rear axles driven and a total of 375 horsepower. It was one of the heaviest Mercedes long distance truck and it had established new dimensions in international long distance traffic. The features of the engine OM422 allowed a particularly economic driving. The gear changes was reduced to a minimum, thus guaranteeing very smooth driving. It achieved a good commercial success all over the world. It’s reliable chassis was a platform to develop customization and dedicated versions for specific needs. It can be considered a starting point for the development of the next generations of road vehicles. Detailed Plastic Kit
Model trucks
1:24 Mercedes-Benz A. MP4 BigSpace GP E.
510003968€71.99
Actros is the commercial name for Mercedes-Benz heavy-duty trucks. The Actros range was introduced in 1995 and quickly achieved significant commercial success, particularly in professional long-distance transport operations. Over time, it has undergone progressive evolution, reaching a high level of quality with the introduction of the "New Actros" to the market in 2012. This model is characterized by an extremely modern and contemporary design and the adoption of Euro 5 and Euro 6 engines, in compliance with the regulations of the period.The vehicle's configuration was designed to optimize operational efficiency, ensuring maximum performance and minimal operating costs. The bold cabin design has provided users, whether small fleet owners or corporate operators, the opportunity to customize their vehicles with highly appealing and innovative aesthetic solutions. Warning! Not suitable for children under 14 years.
Model trucks
1:24 Mercedes-Benz SK1844 LS V8
510003956€59.99
Article number: 510003956 Product: 1:24 Mercedes-Benz SK1844 LS V8 The trucks of the Mercedes-Benz SK series ("Heavy Class" or "Schwere Klasse" in German) were manufactured from the late 1980s. The series is a direct development of the earlier NG models. Among other things, the cabin has been improved to offer more comfort on long journeys. Reliability has also been sustainably increased through the introduction of new technical and electronic solutions. Compared to the previous series, the design has also been significantly modernized. The market appreciated the vehicles of the SK series for their reliability, robustness and operational flexibility in all types of applications. The series' great commercial success led to exceptional longevity. At the end of the 1990s, the SK models were replaced by the first versions of the new Mercedes-Benz Actros. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35 Warning! Not suitable for children under 14 years.
Model trucks
1:24 Opel Blitz Fire Truck
510003966€45.99
The Opel Blitz project was set up with the aim of mass producing a robust and reliable commercial vehicle that could be used for different applications and tasks. Opel began production of the early trucks, based on a typically US "layout", in its Rüsselsheim plant in the early 1930s. This was a success story that evolved over time and continued until the mid-1970s. The Opel Blitz’s sturdy structural characteristics were noted by the Wehrmacht and subsequently deployed by them during the Second World War, in both the 4x2 and 4x4 versions. However, its wartime role was later to be eclipsed by its the great commercial success as a civilian vehicle. During the post-war reconstruction period the Opel Blitz was indispensable to Germany’s recovery, being used by merchants, craftsmen, industrialists and many others to rebuild the country. Numerous outfitted versions were also made, including the fire-fighting one. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model trucks
1:24 Opel Blitz Truck
510003960€45.99
Article number: 510003960 Product: 1:24 Opel Blitz Truck The Opel Blitz project was set up with the aim of mass producing a robust and reliable commercial vehicle that could be used for different applications and tasks. Opel began production of the early trucks, based on a typically US "layout", in its Russelsheim plant in the early 1930s. This was a success story that evolved over time and continued until the mid-1970s. The Opel Blitz’s sturdy structural characteristics were noted by the Wehrmacht and subsequently deployed by them during the Second World War, in both the 4x2 and 4x4 versions. However, its wartime role was later to be eclipsed by its the great commercial success as a civilian vehicle. During the post-war reconstruction period the Opel Blitz was indispensable to Germany’s recovery, being used by merchants, craftsmen, industrialists and many others to rebuild the country. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model trucks
1:24 Peterbilt 378 "Long Hauler"
510003857€62.99
Article number: 510003857 Product: 1:24 Peterbilt 378 "Long Hauler" Mod.Dim.: 32,2 cm The Peterbilt model 378 represents one of the classic style US Trucks. Inside the 378 cab are highback seats and an ergonomically designed dashboard. The 378 could be ordered in many configurations from over the road tractor to a heavy hauler. Our model 378 features a 420HP Detroit Diesel engine. The sloped fiberglass hood tilts 90 degrees for full access to the engine. Our model features dual exhaust, twin chromed air cleaners, deep taper bumper and Peterbilt style wheels.
