RC tires & rims

1:10 2WD Wheel Set XL, RC tire set

€37.99

Give your 2WD RC buggy or truck a massive performance upgrade with the Carson 1:10 XL Wheel Set. This specially designed set is the ideal solution for model builders who want to give their vehicle an impressive “monster” look and improved off-road capability. What makes this set special is its precise tuning: Since XL tires can affect conventional steering angles, Carson includes the matching steering levers right in the package. These are engineered exactly to perfectly compensate for the larger wheel diameter of 105 mm and ensure full maneuverability. The technical details are specifically designed for the Tamiya DT-02 and DT-03 chassis —while the front rims are designed to directly accommodate ball bearings, the rear rims use the proven 12mm hex drive, which is standard on Tamiya and many other brands. The black-and-white color scheme also provides a modern, sporty look. Whether on loose gravel or rough terrain, the wide 65-mm contact patch guarantees optimal traction and stable handling.

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD

€31.49

Built for 1:10 2WD buggies and trucks, this 4-piece all-terrain wheel set brings a track-ready combination of steering precision and drive traction to mixed surfaces. The black and white wheel design pairs 2 front tyres and 2 rear tyres in different widths, creating a layout that suits the demands of a 2-wheel-drive setup on road, gravel, sand and grass. At the front, the 26 mm tyre width supports a more exact steering response, while the 43 mm rear tyres give the driven axle a broader footprint for stronger acceleration grip on loose ground. Each wheel has a 90 mm diameter, giving the chassis a useful balance of agility and clearance over uneven terrain. Foam inserts inside the tyres help the contact patch stay consistent as the model changes direction or loads up under power. The front rims are designed for ball bearings, and the rear rims use Tamiya hex mounts, matching the different mounting needs across the vehicle. Because the tyres are professionally pre-glued, the set goes straight into the workshop plan without a separate bonding step. That makes it a practical choice for replacing worn running gear, preparing a buggy for mixed-surface driving, or setting up a truck for more dependable traction away from smooth tarmac.

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD/4WD

€31.49

Built for mixed-surface running, this 1:10 all-terrain wheel set combines a 90 mm diameter with a 2WD/4WD layout that suits a wide range of RC setups. The 4-piece configuration uses 2 front tyres and 2 rear tyres, creating a purposeful combination for models that need clear steering response at the front and stronger drive support at the rear when the surface changes from asphalt to loose ground. The front tyres measure 26 mm in width, while the rear tyres measure 43 mm, giving the set a staggered format that supports balanced handling under acceleration. Black and white rims add a clear competition-inspired look, and the tyres are professionally pre-glued to the rims for a clean fit straight from the pack. Integrated foam inserts help the tyres hold their shape during intensive driving manoeuvres, so the tread can work consistently as the model loads up in turns and over uneven sections. The wheel set is designed for 4 x 12 mm Tamiya hex mounts, making it a practical replacement set or a fresh running option for compatible chassis. On road, gravel, sand or grass, the all-round tread is aimed at drivers who switch between surfaces instead of tuning for only one. The set suits routine replacement after wear, but also works as a handling-focused update when a model needs broader traction coverage for everyday RC running.

RC combustion engines & glow plugs

1:10 BL Motor Dragster Turbo 2.0, motor

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 3200KV is a brushless drive unit created for electric RC vehicle projects with a clear focus on dragster-style power delivery. Its 3200KV specification points to a fast-revving motor character that suits straight-line acceleration setups and gives model-building enthusiasts a concrete tuning component for 1:10 platforms. As a standalone motor, this unit fits into workshop-based RC builds where the drive system is chosen part by part. The brushless layout makes it a relevant option for hobbyists comparing replacement motors or planning a fresh electric configuration around a defined KV value. The Turbo 2.0 naming gives the motor a distinct place within the range, while the 1:10 scale reference keeps the application tied to model car use rather than full-size electronics. No batteries are included. The age marking is 14 Years. On the bench, this motor suits rebuilds, performance-focused maintenance and targeted drivetrain changes in electric model cars. It also works well as a search-friendly option for enthusiasts narrowing a setup by scale, motor type and 3200KV specification before matching the rest of the electronics separately.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a matched drive upgrade to electric RC models with a 2000 kV sensorless motor and a 60 A electronic speed controller. This 2-part combination is built for hobby setups that need clear throttle delivery, compact installation and a defined power package in one box. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, making it a concrete fit option for many 1:10 chassis layouts where motor space and shaft size matter during planning. Its no-load speed reaches 15,170 RPM, while short-term output is rated at approx. 236 W for lively response when the drivetrain comes under load. The ESC adds 80 g, handles 60 A continuously and up to 360 A peak, and manages forward, brake and reverse functions through a sensorless brushless system. Power supply compatibility covers 2S LiPo and 6-cell NiMH packs, with a T-Plug connector already specified. This set suits rebuilds, replacement projects and performance-focused electronics swaps in 1:10 electric vehicles. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions, giving model-building enthusiasts a clearly defined basis for a fresh drive configuration.  Warning! Not suitable for children under 14 years.

RC brushless motors

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a compact power package to RC vehicle builds with a sensorless 3200 kV motor and an electronic speed controller matched to hobby-grade running. In the chassis, the black finned motor layout and separate controller create a clean drive setup for fast acceleration and direct throttle response. The motor delivers a no-load speed of 24,420 RPM and approx. 390 W short-term output, with 53 A continuous current for sustained running. Its dimensions of 35.8 x 50 mm and a shaft diameter of 3.175 mm provide concrete fitting data for compatible installations, while the motor weight of 148 g and ESC weight of 80 g help when planning the balance of a 1:10 model. The controller is designed for 7.4 V operation and works with 2S LiPo or 6-cell NiMH battery packs. Forward, brake and reverse functions are built into the ESC, and the T-Plug connector forms part of the power connection. This set suits RC car projects that need a coordinated motor and controller combination rather than separate component sourcing. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, motor, 2600KV

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 2600KV is a brushless drive component for electric model vehicle setups, centered on a 2600KV motor specification and a format matched to 1:10 applications. As a dedicated replacement or upgrade part, it brings the drive system back into service with a clearly defined motor unit for workshop benches, rebuilds and running repairs. Within a powered vehicle setup, the motor sits at the heart of the drivetrain, making the KV rating a key reference point when matching the unit to the existing electronics and the intended running character. The product data identifies this version specifically as the Dragster Turbo 2.0 motor, which keeps the designation clear when replacing a worn unit or sourcing the correct spare for an existing model. Because this is a component rather than a complete vehicle, the focus stays on fit within an electric model system and on the practical value of having the correct motor type ready for maintenance. The 14 Years age marking is stated in the product data. On the workbench, this kind of motor suits planned repairs, drive refreshes and parts-led tuning sessions where a named 1:10 brushless unit is the required starting point for getting a model back on track.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 Wheel Set XL, RC wheels, 4WD 12 mm hex

€34.49

Large-diameter wheels can change both the look and the handling of an RC build, and this 1:10 4WD wheel set XL does exactly that with 4 complete wheels in black and white. The 105 mm diameter and 65 mm width create a noticeably larger footprint that suits rougher ground and gives the chassis a more assertive visual presence. Inside each tyre, foam inserts are matched to the construction so the rubber is supported under load instead of folding over or rolling at speed. That internal support helps the tread stay more stable through acceleration, direction changes and uneven sections, which can make the model feel calmer and more predictable in motion. The set is built around 12 mm hex mounting, a widely used format that allows straightforward installation on matching wheel hubs. Compatibility is stated for Tamiya hex mounts, making the set a practical option for many established 1:10 4WD platforms. On loose surfaces such as sand or grass, the XL dimensions can help the model carry momentum with a broader contact area. On firmer ground, the same wheel size gives the chassis a fuller, more aggressive stance that changes the overall character of the build without altering the core layout.

RC tires & rims

1:10 XS-Line, wheel set, 4 wheels for XS-Chassis

€18.79

Built for 1:10 XS-Chassis vehicles, this XS-Line wheel set brings together 4 mounted wheels in a 115 x 60 mm format with a 12 mm hex hub fitment. The black rims and pronounced off-road tread give compatible RC models a purposeful stance while keeping the setup aligned across all 4 corners. The dimensions suit the Carson XS-Chassis platform named in the data, covering references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The wide tyre shape and knobby tread pattern are designed for rougher ground where a smoother road tyre would struggle to bite. As a complete 4-wheel set, it supports an even swap across the chassis instead of mixing old and new running gear. The mounted design also keeps the focus on getting a compatible model back into action with matching wheels and rims rather than sourcing separate parts. In running sessions on dirt tracks, gravel paths or compacted outdoor terrain, the tread pattern gives the chassis the mechanical contact needed for acceleration and direction changes. For workshop use, the set also serves as a practical spare for 1:10 XS-Chassis owners who want the correct 115 x 60 mm wheel format and 12 mm hex connection kept on hand.

Additional accessories

1:14 Box Body Conversion Kit, model kit

€399.99

This 1:14 box body conversion kit reshapes the TAMIYA Volvo FH16 timber truck 300056360 into an articulated truck with a closed cargo body. CNC-milled aluminium parts form the main box structure, while the combination of metal sections and panelled surfaces gives the finished build a purposeful commercial-truck character. A sheet steel subframe, laser cut and CNC bent, is included for mounting on the chassis and creates the structural link between the conversion and the base vehicle. The side sections use screwed plastic panels in a sandwich layout, which adds visible layering to the bodywork instead of a plain flat-sided shell. At the rear, the loading doors are carried on aluminium hinges with a 270° opening angle, allowing the opening mechanism to be shown clearly on the completed model. Magnetic locking keeps the doors closed when the body is in running or display condition. The assembled body measures 545 x 195 x 195 mm and weighs 3,200 g. As a model kit, this conversion suits hobby builds that focus on reworking an existing truck into a different transport configuration. The box body changes the visual character of the Volvo FH16 from timber hauler to enclosed freight carrier and adds a substantial new body section for workshop assembly and finishing.

Light & sound

1:14 LED Light-Set TRUCK, light kit

€25.99

The 1:14 LED Light-Set TRUCK brings working vehicle-style lighting to model truck builds with a compact control unit and multiple LED outputs. Front indicators, rear indicators, front lights, rear lights, brake lights and reverse lights can be simulated through the module, so the model shows different light functions instead of a single constant glow. The unit operates on 4-6 V DC and draws a maximum of 210 mA. Its FUTABA plug system is compatible with TAMIYA models, and the connection layout links the module with receiver channels CH1 and CH2 as well as the steering servo and speed controller. The lighting setup uses 3 mm LEDs for the front and rear indicators plus the reverse lights, while the front lights, rear lights and brake lights use 5 mm LEDs. A demo mode starts when the transmitter is switched off, allowing the lighting functions to be shown without active driving input. With dimensions of 42 x 32 x 13 mm and a weight of 44 g, the module fits neatly into many 1:14 truck installations where electronics space is limited. The set suits hobby builds that aim for more detailed road-truck behaviour, whether the model is being wired for workshop installation, display preparation or running sessions on the course.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Climb/Dessert Warrior 3.0, wheel set

€40.99

The 1:8 Climb/Dessert Warrior 3.0 wheel set brings a fresh running setup to off-road RC sessions with 4 mounted wheels that combine black rims and knobby rubber tyres in one ready-to-fit package. The tread pattern is shaped for rough terrain, giving the model a more planted feel on dirt sections, gravel paths and broken ground where clean traction matters. Each wheel uses a black multi-spoke rim with a deep inner dish and reinforcing spoke structure visible from the rear. On the outer face, the beadlock-style look with small moulded bolt details gives the set a purposeful desert and off-road character that suits the Climb/Dessert Warrior 3.0 designation. The central hex-style hub opening supports a direct mechanical connection at the axle, so the wheel set is built around practical replacement use rather than display-only styling. As a 4-piece set, the wheels suit a full vehicle refresh after heavy running or a matched swap before the next session on loose surfaces. The mounted design keeps the focus on getting a 1:8 model back onto the track with a consistent look and tread pattern across all 4 corners.

RC tires & rims

1:8 Virus Extreme, wheel set, 2 mounted wheels

€33.99

The Virus Extreme name points straight to rough-surface running, and this 1:8 wheel set supports that role with 2 mounted wheels built as complete assemblies. The black finish, multi-spoke rim design and pronounced off-road tread give the pair a focused look that suits a hard-driven RC setup on dirt and gravel. Because the rims and tyres are already combined, the set works as a straightforward replacement when existing running gear is worn or damaged. The deep block pattern is shaped for loose terrain, where the tread can key into the surface during acceleration and direction changes. The ready-built format also helps when keeping matching spares in the workshop, since both wheels share the same visual style and tread pattern. As a model supply for the Virus Extreme, the set concentrates on one practical job: restoring a consistent wheel and tyre setup with parts made for this series. On a buggy prepared for outdoor sessions, a fresh pair can be fitted before the next run on compacted earth, gravel paths or rough track sections. The set also suits routine maintenance between driving days, when a matching 2-wheel replacement keeps the model prepared for the next outing.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Wheel-Set KOD, wheel set, 17 mm hex

€40.99

Chunky tread blocks and a 1:8 format give this KOD wheel set a focused off-road setup for compatible RC vehicles. Designed for models with a 17 mm hex wheel hub, the 4-wheel set brings a direct way to refresh the running gear with a tread pattern built for loose and uneven ground. The mounted wheels combine black rims with rubber tyres shaped around an extreme stud profile. That profile gives the contact patch a more aggressive bite on dirt and rough tracks, while the rubber compound is specified for a very long service life. As a replacement set, the 4 matching wheels keep the vehicle on a consistent tread pattern at every corner, which matters when the chassis is working across mixed off-road surfaces. The 1:8 scale fit also makes the set relevant for a broad range of larger RC off-road platforms that use the stated hub format. In use, the wheel set suits track days on dusty ground, rough bashing areas and uneven outdoor terrain where a deeper tread pattern can make a clear difference. For model-building enthusiasts, it is a straightforward upgrade or spare set that keeps a compatible vehicle ready for the next run.

RC electric motors & controllers

540 Pro 13T-BB, electric motor, 6 V RC drive

€18.99

The 540 Pro 13T-BB electric motor is a brushed RC drive unit built for model vehicle projects that need a clearly defined performance setup. With 13 turns, a nominal voltage of 6 V and an operating range from 4.8 to 8.4 V, it fits tuning, replacement and workshop builds where the electrical data matters as much as the fit. The attached cable adds a practical connection detail straight from the pack. Its technical profile centres on 32,000 rpm, 35 N mm torque, 99 W output and 5.3 amps current consumption. That combination suits hobbyists comparing drive characteristics across compatible RC electronics rather than choosing by size alone. The 540 can format is a familiar reference point in many model vehicle platforms, and the BB designation marks this version as a ball bearing motor. For workshop planning, the stated voltage window helps match the motor to an existing setup without guesswork. In use, this motor suits replacement jobs on worn brushed drives, fresh tuning builds and spare-parts boxes for regular track or car park sessions. The compact 540 format and included cable keep the focus on fitting the motor into a compatible RC chassis and getting the drivetrain back into action.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 17T-BB, electric motor, 6 V brushed

€18.99

The 540 Pro 17T-BB electric motor brings classic brushed drive character to RC vehicle builds with a 540 size format, 17 turns and a measured output of 69 W. At 24,500 rpm, the motor delivers a lively power curve that suits hobby setups looking for a defined balance of speed and control rather than an undefined all-round unit. Its nominal voltage is 6 V, while the stated operating range of 4.8 to 8.4 V leaves room for different electronics configurations within the same build plan. Current consumption is listed at 3.5 amps, and the 32 N mm torque figure gives a concrete reference for how the motor translates electrical input into rotational force at the shaft. The BB designation points to ball bearing support, a detail valued in model-building circles for smooth running in a compact drive component. Included cable simplifies the connection step and keeps the motor ready for fitting into a compatible RC chassis. With an age marking of 14 years, this motor fits enthusiast-oriented RC projects where component choice shapes the final driving character. It works well in workshop-style upgrade sessions, replacement builds or fresh vehicle assemblies where a 540 brushed motor with 17 turns is the required drive unit.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 21T-BB, electric motor, 6 V 60 W

€18.99

The 540 Pro 21T-BB electric motor brings classic brushed drive technology to RC model builds in a compact 540 size format. With 21 turns, a 6 V nominal voltage and a stated output of 60 W, it gives hobby projects a clearly defined motor option for drivetrain installations where size, power and electrical data all need to line up. Its operating range spans 4.8 to 8.4 V, making the motor suitable for different compatible power configurations within that window. The stated speed of 19,000 rpm and current consumption of 2.7 amps provide concrete figures for planning the drive package around the motor's characteristics. A torque rating of 30 N mm adds another useful reference point when matching the motor to gearing, transmission parts and the intended running style of the model. The included cable supports straightforward integration into the vehicle's electrical layout. In workshop use, this motor suits enthusiasts comparing voltage, rpm, torque and turns before choosing a brushed setup for a compatible RC vehicle. It also works well as a replacement or upgrade path when an existing 540 format installation calls for a motor with clearly specified electrical and performance values.  Warning! Not suitable for children under 14 years.

LiPo batteries

7.4V 4500mAh LiPo Classic-Size, RC battery

€36.99

Built for classic RC layouts, this 2S LiPo battery brings 7.4V output, 4500mAh capacity and a 60C discharge rate into a Classic-Size format that matches the footprint of conventional NiCd and NiMH packs. In a 1:10 chassis with a standard battery slot, the 134 x 45 x 24 mm housing drops into the familiar space while delivering the response and consistency expected from modern LiPo power. The pack uses a Deans plug connector for the main connection and an XHP balancer connection for cell balancing during charging. Its 223 g weight places a substantial energy reserve into a format that remains suitable for common vintage RC cars. The 2-cell configuration supplies 7.4 volts, making it a direct fit for setups designed around this voltage class. The 4500mAh rating extends running potential beyond smaller packs, while the 60C specification supports current demand when acceleration loads rise. Age marking: 14 years and over. This battery suits restoration projects, regular track sessions and classic touring car builds that use a standard battery compartment. It also works well where older chassis dimensions matter, but modern LiPo chemistry is preferred over legacy pack formats.  Warning! Not suitable for children under 14 years.

Li-ion batteries

7.4V 600mAh LiION Battery, replacement battery

€13.99

This replacement battery is specified as a 7.4 V, 600 mAh LiION pack with a Sea Ray JST-3 connector, making it a clearly defined power component for compatible Carson RC Sport vehicle setups. The stated voltage, capacity and plug format give model-building enthusiasts concrete matching points when replacing a worn pack or adding another battery for continued use. As a spare power pack, it focuses on the essentials that matter in an electric RC setup: the 7.4 V rating for the intended system, 600 mAh capacity, and the named Sea Ray JST-3 connection standard. That combination helps narrow compatibility within the relevant vehicle range and keeps the choice grounded in actual technical data rather than approximation. Because the battery is sold as a replacement battery, the role is straightforward: it substitutes for an existing pack with the same specification in suitable models. In practice, this suits workshop shelves, pit boxes and home charging routines where a correctly matched battery is kept ready for the next run. For compatible RC vehicles that use a 7.4 V LiION pack with Sea Ray JST-3 connection, it adds a direct replacement option built around the exact figures given in the product data.

RC tires & rims

Alu Hex Hub 17 mm, RC wheel hub set

€13.49

Small drivetrain parts can make a decisive difference in an RC build, and this Alu Hex Hub set brings a clear mechanical upgrade point with 17 mm wheel mounting hardware. The set includes 2 blue anodized aluminium hub adapters with a hexagonal base and threaded body, giving model builders a defined interface for wheel fitment and axle connection. Each adapter is paired with a matching hex nut, while the included silver pins and black set screws complete the fastening hardware for installation. The hollow cylindrical opening and side hole shown on the hub design indicate a locking layout built around pin retention and screw fixing rather than a simple push fit. That construction supports controlled assembly work when worn parts need replacing or a compatible setup is being refreshed. With 2 hubs in the pack, the set is suited to targeted repair work on one axle position. On the workbench, the compact format keeps the focus on accurate fitting, clean fastening, and dependable mechanical engagement between axle and wheel mount. The 14 years+ age marking places the set in the hobby segment, where tuning, maintenance, and parts changes are part of the hands-on appeal of RC model ownership.

RC tires & rims

Desert W.4x Tyre Wheel Set, RC wheels

€33.99

The Desert W.4x Tyre Wheel Set brings a rugged off-road look to RC vehicle builds with black tyres, black multi-spoke rims and a tread pattern cut for rough terrain. In the workshop or at the track, the set gives scale-focused off-road models a more purposeful wheel setup with a strong visual link to crawler and desert-style machines. The tyre surface shows deep, widely spaced tread blocks that are shaped to work across loose ground, gravel and uneven sections. Beadlock-style rim detailing adds a technical appearance around the outer edge, while the central mounting hole marks the set out as a running component rather than a display part. The sidewall styling visible on the tyres reinforces the off-road character and gives the wheels a more realistic scale presence once fitted. With tyre and rim already combined, the set concentrates on one of the most visible areas of an RC build and changes both stance and terrain focus in a single swap. On shelf-built crawlers, trucks or other off-road RC models, the wheel set suits projects that aim for a tougher terrain profile and a more planted visual finish. It also works well as a replacement set when an existing build needs fresh wheels with a deeper tread layout for rougher running conditions.

RC brushless motors

Dragster Turbo 2.0, brushless set, 1:10

€59.99

The Dragster Turbo 2.0 brushless set brings a matched drive upgrade to 1:10 RC models with a 2600 kV sensorless brushless motor and a 60 A waterproof ESC. With a no-load speed of 20,720 RPM and short-term output of about 310 W, the set is built for hobby setups that call for stronger acceleration and a more direct throttle feel. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, giving clear reference points for installation planning in suitable chassis. Its continuous current is 42 A. The ESC adds 80 g and is designed for 2S LiPo or 6-cell NiMH batteries at 7.4 V. A forward, brake and reverse function is integrated, and the controller handles 60 A continuous current with 360 A peak current. The T-Plug connector defines the battery-side connection, while the included switch module and receiver lead support standard RC wiring layouts. This set suits rebuilds, performance-focused replacements and fresh 1:10 projects where motor and controller need to work as a coordinated pair. A brushless motor, speed controller and instructions are included. A battery pack, charger and radio gear are required separately.  Warning! Not suitable for children under 14 years.

RC tires & rims

Drakuro Wheels, RC wheel set, 140 x 75 mm

€37.49

This Drakuro wheel set brings the stated 140 x 75 mm format to the running gear of the 1:8 4WD chassis, with 2 wheels supplied alongside wheel nuts and covers. The 12 mm wheel spindle size gives the key mounting detail up front, so the set can be matched against the required hub specification without guesswork. The dimensions in the data point to a clearly defined replacement part rather than a generic wheel. A 140 mm diameter and 75 mm width establish the wheel size directly, while the included nuts and covers complete the parts named for installation. The set is linked in the data to the 500409096 Drakuro BL 3S anthracite/red and the 500409097 Drakuro BL 3S blue, which gives model builders and RC drivers a concrete reference when selecting spares for maintenance or repair. As a 2-piece wheel set, it suits axle-based replacement where the matching size and spindle format matter. In workshop use, this set supports routine upkeep after wear on the original running gear or damage during driving. It also fits neatly into a spares box for the named Drakuro variants, where the wheel dimensions, 12 mm spindle detail and included mounting hardware can be checked at a glance before the next rebuild or track session.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH 2,2A, charger, 5-8 cells

€23.49

The Easy Charger NiMH 2,2A brings a focused charging setup to RC bench work with a 2.2 A maximum charging current, 25 W output power, and support for NiMH battery packs with 5-8 cells. Delta peak cutoff is built in, so the charger monitors the pack during charging and stops the process at the defined point for this battery type. Its AC 100-240 V input makes the unit suitable for common mains voltages, which helps when the charger moves between home workspaces, club tables, and event locations. The Tamiya charging connector keeps compatibility clear for packs that use this established plug format. Included contents are the charger, power cable, and manual. 14 years marks the recommended age. On a hobby bench, the compact specification keeps the task simple: connect a compatible NiMH pack, power the charger from the mains, and let the delta peak function handle the charge endpoint. It also fits neatly into an RC equipment setup where a dedicated charger for 5-8 cell NiMH packs is needed alongside running gear and workshop essentials.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH 3A USB-C, charger

€16.99

The Easy Charger NiMH 3A USB-C brings a compact charging setup to RC workbenches and track bags with USB-C input, NiMH support and a maximum charging current of 3 A. Designed for 4-8 cell NiMH battery packs, it combines a modern power connection with the familiar charging needs of many hobby-grade RC systems. Its input range of 9-20 V DC allows operation from compatible USB-C power supplies, adding flexibility when charging away from a fixed hobby station. Delta-peak cut-off manages the end of the charging cycle for NiMH chemistry, so the charger is built around the charging behaviour these packs require rather than a one-size-fits-all approach. The Tamiya connector gives a direct link to compatible battery packs, which keeps the setup focused on common RC battery connections. Charger, USB-C charging cable and instructions are included. In practice, this charger suits workshop preparation before a run, battery top-ups between sessions and compact transport in an RC kit. The 14 Years age marking is stated in the product data, and the charger fits naturally into hobby routines built around NiMH-powered models and accessories.

RC electric motors & controllers

Electric Motor 540 23T-BB, RC motor, 6 V

€14.99

The 540 23T-BB electric motor brings classic brushed drive technology to compatible RC vehicle builds with a clearly defined 540 format, 23 turns and 50 W output. A nominal voltage of 6 V and a working range from 4.8 to 8.4 V give model-building enthusiasts concrete figures for planning a suitable drivetrain setup around the motor. Its 19,900 rpm speed, 2.2 amp current consumption and 29 N mm torque outline how this unit is positioned within an RC system: fast enough for responsive running, yet specific enough for considered replacement or tuning decisions. The included cable adds a practical installation detail straight from the box contents, while the single output shaft and compact cylindrical housing suit the familiar layout used in many powered model vehicle applications. As a standalone motor component, it fits naturally into workshop routines such as refreshing a worn drive unit or assembling a new compatible chassis. In use, this motor suits hobby bench setups where voltage, turns and output need to be matched carefully to the rest of the electronics. The 14 Years marking places it within the hobby-focused end of the range, making it a fitting choice for model vehicle enthusiasts working on maintenance, upgrades or fresh RC builds.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Electric Motor 540 80T-BB, RC motor, 6 V

€14.99

The 540 80T-BB electric motor brings classic brushed RC drive hardware into compatible vehicle builds with a 6 V nominal voltage, 80 turns and a measured output of 15 W. Its cylindrical 540 format, output shaft and attached cable create a straightforward basis for drivetrain installation where controlled delivery and clear mechanical feedback are part of the appeal. A voltage range of 4.8 to 8.4 V opens the motor to different matching electrical setups, while the stated current consumption of 0.7 amps adds a concrete reference point for planning the drive system. The rated speed of 5,900 rpm works alongside 130 Nmm torque, giving the motor a balance that suits applications where usable pull and steady response matter alongside rotation. The included cable is already fitted to the motor, so the connection side is present from the start. Age marking: 14 Years. In an RC workshop, this motor fits naturally into replacement projects, fresh chassis builds or drivetrain changes that call for a 540-size brushed unit. It also suits hobby setups where the focus lies on matching voltage, torque and rpm figures carefully to the rest of the running gear for a well-judged result.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

ESC/RX unit REFLEX-XS, RC electronics, XT60 plug

€30.99

The ESC/RX unit REFLEX-XS brings drive control and 2.4 GHz radio reception together in one compact electronics module for 1:10 XS-Chassis vehicles. With its integrated layout, the unit combines key control functions in a single housing and supports a clean installation inside compatible Carson models. Visible connection points include a 3-pin socket marked S, + and -, attached power leads, an ON/OFF switch and an XT60 plug interface. This arrangement gives the module a clear role within the vehicle's electrical system, linking throttle control, signal handling and power routing through one central component. The slim antenna wire is part of the built-in receiver section, while the finned front section adds a distinct technical layout to the housing. The unit is intended for Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. As a replacement or service component, it suits workshop setups, maintenance tasks and rebuilds where the matching chassis reference matters. 14 Years marks the recommended age.

Chargers & charging cables

Expert Charger Max 15, charger, 15A 300W

€79.99

Expert Charger Max 15 brings charging, signal measurement and bench testing together in one compact unit for RC and model-building setups. With up to 15 A charging current and 300 W on DC or 100 W on AC, it handles everyday pack management with the output needed for a broad mix of battery types. The supported battery range covers LiPo, LiHV, LiFe, LiIon and LTO packs from 1-6 cells, NiMH from 1-16 cells and Pb from 1-10 cells. An integrated 1 A balancer equalises cell voltage during charging, adding a dedicated function for lithium pack care. Beyond charging, the unit reads PWM, PPM and SBUS signals and measures both voltage and internal resistance, giving useful data for checking electronics on the bench. ESC test mode adds another practical workshop function, and the adjustable power supply broadens the device's role in model maintenance and setup work. A 2.0" IPS display with 320 x 240 pixels keeps menus and readings clear during operation. AC input from 100-240 V and DC input from 7-28 V support use in different workshop and field power situations. With dimensions of 108 x 106 x 60 mm and a weight of 350 g, the charger fits easily into RC pit gear, workbenches and transport cases. Included are 1 charger, 1 AC cable and 1 USB A to USB A upgrade cable. Age 14+  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 2A Charger Set, battery set

€44.99

The Expert Charger NiMH 2A Charger Set combines a compact charging unit with a 7.2 V 2500 mAh NiMH racing pack for RC running sessions with less downtime between uses. Its 20 W output and charging current of up to 2 A give the charger a clear, focused role on the hobby bench, while the transparent housing, ventilation slots and start stop control shown on the unit underline its workshop-ready layout. Designed for NiMH battery packs from 4 to 8 cells, the charger covers more than a single pack format and suits a range of compatible RC applications. The mains input of 110-240 V supports use with common power supplies, which makes the set practical for club rooms, home workspaces and travel between running locations. A clear status LED keeps the charging state visible during operation, and the automatic shut-off function ends the process once charging is complete. The included mains cable connects the charger directly to the power source, while the matched battery pack adds 2500 mAh capacity in a 7.2 V format. On the workbench, the set supports routine preparation before a driving session and straightforward recharging afterwards. For RC enthusiasts aged 14 years and up, it brings together charger, battery and connection standard in a compact format that fits regular hobby use.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 2A, battery charger

€22.99

The Expert Charger NiMH 2A is built for RC and model-building enthusiasts who need a dedicated charger for compatible NiMH battery packs. With support for 4-8 cells, a maximum charging current of 2 A and up to 20 W output power, it covers a practical range for regular workshop charging while keeping the setup focused and easy to handle. The charger runs on 110-240 V input voltage and connects through a TAMIYA plug, making it suitable for many established hobby battery formats. A clearly visible status LED keeps the charging state readable during use, while the Start/Stop control shown on the unit adds direct handling at the charger itself. Automatic cut off manages the charging process with a defined stop function for compatible packs. Cooling vents on the housing support airflow around the unit during operation, and the mains cable is included for immediate connection to a power outlet. On the workbench, in the hobby room or as part of a regular RC maintenance setup, this charger fits neatly into the routine between driving sessions. The set includes the EXPERT CHARGER NiMH 2A, a mains cable and a German/English manual.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 4A Charger Set, battery

€69.99

The Expert Charger NiMH 4A Charger Set combines a compact charger with a 7.2V 4000mAh NiMH racing pack for RC vehicle use and workshop-ready battery care. Automatic shut-off ends the charging process when the cycle is complete, while the status LED gives a clear visual readout during each session. The charger accepts input voltage from 110V to 240V and supports LiPo, LiHV, LiFe and NiMH battery types. Compatible cell counts cover LiPo 2-4S and NiMH 5-8 cells, opening the set to a wide range of common RC power formats. Charging current adjusts from 0.5A to 4A in 0.5A steps, so the output can be set to suit the connected pack rather than running at one fixed rate. Maximum output power reaches 50W. Included in the set are the charger, the NiMH drive battery, a mains cable and 1 XT60 to NiMH adapter cable. On the workbench, the set supports routine charging before driving sessions, battery swaps between runs and straightforward preparation of compatible packs. The included 7.2V 4000mAh racing pack also gives the set an immediate starting point for RC models that run on NiMH power. Radio gear, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz

€119.99

The FS 14K Reflex Stick Pro 4 brings a 14-channel layout, 2.4GHz transmission and a modern ergonomic RC housing into one control system shaped for complex model functions. Its carbon-look surface and illuminated logo give the transmitter a technical, workshop-ready appearance when powered on. The channel structure is designed for detailed function control. Four channels work continuously and fully proportionally for direct response through the control sticks, while channels 7, 8, 9, 10, 13 and 14 are assigned to 3-position toggle switches. Channels 5, 6, 11 and 12 operate through 3-position push buttons with centre position, creating a clear split between proportional inputs and switched functions. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply allows up to 11 V without BEC. A 15-channel receiver is listed in the included contents. For setup work, channels 1 to 4 feature servo reverse and trim, and channels 1 and 4 add dual rate for servo travel adjustment. This makes the system suitable for models that need tailored steering, throttle or auxiliary function behaviour. 100% compatibility is stated for TAMIYA MFC 01, MFC 02, MFC 03 and DMD units, which suits truck and function-model layouts with multiple switching tasks. 14 Years is stated as the recommended age.

Remote-controlled systems

FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz

€149.99

The FS 14K Reflex Stick Pro 4 LCD 2.4GHz brings broad channel control and fine setup options into one radio system built for demanding RC models. With 14 channels, an LCD layout and a 15-channel receiver in the set, it supports complex functions that go beyond basic steering and throttle, while the carbon-look finish and illuminated logo give the transmitter a distinctive technical appearance. Channels 7, 8, 9, 10, 13 and 14 use 3-position toggle switches, while channels 5, 6, 11 and 12 use 3-position push buttons with centre position. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply can reach up to 11 V without BEC. A Graupner J/R connector system is used for integration, and the radio is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as DMD units. The set includes the 14-channel LCD remote control, a 15-channel receiver and a manual. For truck, construction and function models with multiple switching tasks, the channel layout supports lighting, sound and auxiliary functions from one handset. The 14 Years marking fits advanced RC use, where stored model setups and detailed channel assignment matter during regular driving and system changes.

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

€99.99

The FS 6K Reflex Stick Pro 4 2.4GHz brings 6-channel radio control into a layout built for detailed model setups and precise handling. Four continuously adjustable, fully proportional channels work alongside a 3-position push button on channel 5 and a 3-position toggle switch on channel 6, giving a clear control structure for driving functions and switched features. The integrated failsafe system adds an important control function for model operation. Trim for channels 1-4 supports exact correction directly at the transmitter, while dual rate for channels 1-2 adjusts servo travel for a more tailored response. The control sticks use precise, smooth mechanics, and the housing combines an ergonomic shape with a carbon-look surface and an illuminated logo when powered on. The transmitter operates at 4.8-6 V with 4 AA cells, the receiver power supply reaches up to 11 V without BEC, and the connector system uses Graupner J/R. Compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units expands the range of suitable model applications. On the bench, the channel layout supports careful setup of steering, throttle and auxiliary functions before a model heads out. During driving sessions, the separate switching options and proportional control help keep inputs clean and deliberate across different model configurations.

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

€109.99

The FS 6K Reflex Stick Pro brings 2.4GHz radio control, a 6-channel layout and an LCD interface into one focused setup for model driving with a clear, technical feel in hand. Smooth control sticks, an ergonomic housing and a carbon-look surface shape a transmitter that suits longer sessions at the workbench and on the track alike. Channels 1 to 4 are continuously adjustable and fully proportional, while channel 6 is assigned to a 3-position toggle switch and channel 5 to a 3-position push button with centre position. The transmitter stores 15 model memories, making it easier to keep separate configurations ready for different vehicles. For channels 1 to 4, servo reverse changes direction of movement, trim corrects neutral position, dual rate adjusts servo travel, EPA limits servo travel and EXP changes response characteristics around centre input. The receiver power supply can reach up to 11 V without BEC, and the system is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as the DMD unit. A 6-channel receiver and manual are included. 4 AA cells are required separately for the 4.8 to 6 V transmitter operating voltage. With a minimum age marking of 14 years, this radio set fits hobby-focused RC setups where multiple channel functions, stored profiles and detailed response adjustment matter during driving and setup.

Remote-controlled systems

KO Battery Stand Unit EX-NEXT Accessory

€63.99

The KO Battery Stand Unit in BlackSP is a dedicated accessory for the EX-NEXT designation named in the data, adding a defined support element to an RC radio setup with a focused, technical look. Its compact stand format suits bench organisation and pit-area handling where equipment benefits from a fixed resting point between driving sessions. The data identifies this version as BlackSP, giving the accessory a distinct finish within the EX-NEXT range rather than leaving it as an unspecified spare. As a stand unit, it serves a clear hardware role in the surrounding setup and fits naturally into model-building and RC routines that involve repeated handling of radio equipment. The accessory is listed separately, so the emphasis stays on its specific function as an add-on component for an existing system. Batteries are not included. In practical use, the stand unit supports a more ordered workspace during charging breaks, maintenance tasks or session changes at the track. It also suits hobby desks where RC equipment is stored ready for the next run while keeping the EX-NEXT setup visually consistent.  Warning! Not suitable for children under 14 years.

RC remote controls

KO Trigger Pad Set, model accessory

€10.59

The KO Trigger Pad set is a model accessory from the Carson Modelsport range, listed with the exact designation used in the product data. With an assembly time unit in minutes, a voltage unit in volt, a maximum speed unit in km/h and a maximum operating time unit in minutes present in the data structure, the available verified detail for this entry remains focused on the accessory name itself rather than on technical fitment or performance figures. That makes the strongest, most reliable description a precise one: KO Trigger Pad set identifies a specific spare or replacement component for model-related equipment, and it belongs in a parts selection built around exact naming. The data confirms that batteries are not included and gives an age marking of 14 Years. No further verified information is provided here on compatibility, dimensions, material composition, included quantity, or supported systems, so those points are left unstated rather than guessed. Within a hobby bench, workshop drawer or model maintenance setup, an exactly named accessory set helps keep existing equipment in service and supports targeted parts searches when a matching component is needed. The entry is therefore written around the confirmed designation and the clearly stated 14 Years age marking, without inventing fitment details that the data does not supply.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Li-Ion replacement battery, RC accessory, JST

€9.99

This Li-Ion replacement battery brings the correct 3.7 V power supply and 500 mAh capacity to selected 1:24 Carson RC Sport vehicles, keeping compact RC car setups ready for the next drive. The JST plug connection gives the battery a defined connector format for models built around this matching lead. With 1.9 Wh, the battery is designed as a rechargeable spare pack for small-scale electric RC cars that use this voltage and connector layout. The visible 2-wire lead connects the battery pack to the vehicle electronics through the specified JST plug, making compatibility the key point when choosing this spare. The pack is listed for the 1:24 Lamborg.Murcielago SV, Lamborgh.Veneno, M.-Benz SLS AMG, Ford GT, Aston Martin Vantage and Lamborghini Sian. The pack contains 1 spare battery. As a workshop shelf spare or a direct replacement for a used pack, this battery fits neatly into an RC routine built around short charging breaks and repeat driving sessions. For collectors and hobby users running several compatible 1:24 road cars, the shared battery format keeps the setup focused on the models named in the compatibility list.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Multi-Charger Cable 8in1, charging lead, 4mm

€10.99

The Multi-Charger Cable 8in1 brings 8 common RC charging connections together in one harness, linking a charger with 4 mm banana plugs to a wide spread of battery connector standards. Crocodile clips, Futaba, BEC, T-Plug, XT90, XT60, Tamiya and Mini Tamiya are all present on the lead, giving the bench a compact way to handle different packs without changing between separate adapters. The cable format suits model-building enthusiasts who keep several battery types in rotation across different machines and electronics. The paired red and black 4 mm banana plugs form the charger side, while the branched output end presents the charging options in one place. This makes the lead useful when older packs, current high-current connectors and smaller legacy formats all need support within the same workshop setup. The harness works as an accessory in the charging chain rather than as a battery or charger itself, so its role stays clear when organising RC equipment. On the workbench, the Multi-Charger Cable 8in1 helps streamline routine charging before driving sessions, maintenance work or battery checks. It also fits neatly into a field box or workshop drawer as a single connection solution for mixed RC collections.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

RA 3Ch Reflex Stick Pro 4, remote control, 2.4GHz

€49.99

The RA 3Ch Reflex Stick Pro 4 brings 2.4GHz radio control together with a classic stick layout for model driving that calls for direct, proportional input. With 3 channels and 2 continuously adjustable, fully proportional control paths, steering and throttle commands can be metered with fine control, while channel 3 is switched in 2 positions for a clear auxiliary function. Channel 1 includes dual rate to adjust servo travel, which helps match the steering response to different model setups. Servo reverse changes the direction of movement for the channels when the installation requires it, and the trim function for channels 1-2 supports accurate neutral settings. The transmitter operates at 4.8-6 V with 4 AA cells, and the receiver power supply allows up to 11 V without BEC. The connector system uses Futaba/Graupner J/R, giving the set a clear interface for compatible RC components. The set includes the 3-channel remote control, a 4-channel receiver and a manual. An LED battery status indicator keeps the transmitter charge level in view during running sessions, while the failsafe system provides a defined response if the radio link is lost. Age 14 Years+  Warning! Not suitable for children under 14 years.

Remote-controlled systems

RA 4Ch Reflex Stick Pro 4, remote control, 2.4GHz

€64.99

The RA 4Ch Reflex Stick Pro 4 2.4GHz LCD brings 4-channel control and detailed setup functions into one radio system for model driving from age 14 years. Its LCD layout supports direct access to key settings, while 15 model memory slots keep multiple vehicle configurations stored and ready for use. Two fully proportional channels allow continuously adjustable steering and throttle input, and 2 additional switch channels handle special functions on compatible models. Channels 1 and 2 can be tuned with servo reverse, trim, dual rate, EPA and EXP, giving clear control over direction, centre position, servo travel limits and response curve. The integrated failsafe system adds a concrete control safeguard for supported setups. The transmitter operates at 4.8 to 6 V with 4 AA cells, and the connector system uses Graupner J/R. A 4-channel receiver is included, so the system can move straight into installation on a suitable model. The receiver power supply supports up to 11 V without BEC, which suits a wide range of hobby configurations. This combination fits model-building enthusiasts who want one radio system for several vehicles, special functions and fine setup work at the bench or track.  Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Pro 3 Electric Set, RC radio system

The RC-Reflex Pro 3 Electric Set brings the core electronics for an RC ground model into one coordinated package. A 2-channel 2.4 GHz transmitter works with a 4-channel mini receiver to handle steering and throttle commands, while the pistol-grip layout supports one-handed control with a trigger and side wheel format familiar in car-based RC setups. Alongside the radio link, the set includes a CS-6 steering servo for installation in a compatible model and a 7.2 V 3000 mAh drive battery for the vehicle itself. The Expert Charger is part of the set, and 4 AA transmitter batteries are also included for the handset. This combination suits fresh builds, replacement electronics, or an upgrade from older radio gear where the main control components need to be assembled in one step. With 2 frequency channels and 16 listed parts, the set covers the central functions needed to equip a model for radio-controlled driving. In use, the electronics set fits naturally into workshop preparation before a chassis goes to the track, car park or garden path. The included components support installation, charging and control in a format aimed at hobby-focused RC driving, whether for a first compatible setup or as a practical replacement package for an existing model.  Warning! Not suitable for children under 14 years.

RC remote controls

REFLEX STICK PRO 3.1, radio set, 2.4GHz

€84.99

The REFLEX STICK PRO 3.1 Elektro Set brings the core electronics for an RC model into one coordinated package, centred on a 2-channel 2.4GHz radio system with fully proportional control. Steering and throttle inputs respond progressively rather than in fixed steps, which supports cleaner line control on the track, at the workbench, or during first setup runs. The transmitter operates on 4.8-6V and uses a stick layout familiar across many hobby-grade applications. Beyond the radio itself, the set combines a 2.4G receiver, a CS3 servo, a 7.2V 2500mAh racing pack, a USB charger with 7.2V 250mAh output, and 4 AA Ansmann batteries. Servo reverse is available on both channels, so steering or throttle direction can be corrected directly at the transmitter when the installed linkage runs opposite to the intended movement. The steering and throttle trim functions help dial in neutral position and straight tracking, while dual rate on the steering channel allows reduced or expanded steering travel depending on the model's response. A charging socket with positive pole inside and an LED battery charge status indicator add clear handling details during use. The plug system is compatible with Futaba and Graupner JR, which broadens integration across common RC installations. In a touring car, buggy, boat, or similar hobby build, the set covers the key radio and power components needed to move from installation to controlled running with matched electronics.  Warning! Not suitable for children under 14 years.

RC remote controls

REFLEX XS 2.4GHz Transmitter, RC controller

€25.99

The REFLEX XS 2.4GHz transmitter brings classic wheel-style RC control to compatible XS-Chassis models with a compact pistol-grip format, a side steering wheel and a trigger for throttle and brake input. The black and dark grey housing keeps the layout focused, while the 2.4GHz system suits interference-conscious driving sessions where clean radio control matters. Its control concept follows the familiar car transmitter arrangement: the foam-covered wheel handles steering input, and the trigger manages acceleration and braking through one hand position. Visible setup markings such as REV, ST, TH and D/R point to onboard adjustment functions that support model-specific tuning rather than a fixed one-setting layout. The top section also carries additional adjustment points, giving hobby users direct access to setup changes on the transmitter body. This transmitter is intended for CARSON XS-Chassis references 500404360, 500404361, 500404362, 500404363, 500404252, 500404253, 500404254 and 500404255. The 14 Years age marking is stated in the product data. In the workshop, at the track or on a casual driving surface, the wheel-and-trigger format keeps steering and speed control close together for responsive handling on compatible RC vehicles.

RC electric motors & controllers

REFLEX-XS ESC/RX Unit, RC electronics for XS-Chassis

€39.99

The REFLEX-XS ESC/RX unit is a dedicated electronics replacement for Carson XS-Chassis vehicles in 1:10 scale, combining ESC and receiver functions in one compact module. With its XT60 plug connection, it is set up for the stated chassis family and supports a clean return to the original control layout when an existing unit needs to be replaced. This spare part is assigned to the Carson XS-Chassis range under the references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The listed vehicles include Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants, which makes the unit a precise match for several models within the same platform. As an ESC/RX combination, it brings two core electronics functions together in one component, which helps keep the installation focused on the chassis system named in the data rather than on mixed standalone parts. Within workshop use, this unit suits repair, maintenance and platform-specific replacement work on compatible Carson models. The 14 years and up marking is stated in the product data, and the part sits in the model supplies area for hobby-oriented vehicle upkeep and running repairs.

Li-ion batteries

Spare Battery Cage Fighter, battery, 7.4 V JST

€9.99

This spare battery is made for the Cage Fighter platform and adds a defined power option for RC running sessions with a 7.4 V LiIon setup. The rechargeable pack combines a compact format with a fitted JST plug connection, so it matches the stated connection type for the compatible vehicle range. The product data names 600 mAh capacity and identifies the battery as suitable for 2 specific 1:10 models: 500404302 Cage Fighter 2.4GHz 100% RTR green and 500404303 Cage Fighter 2.4GHz 100% RTR orange. That clear model assignment helps avoid guesswork when replacing a used pack or keeping a second battery ready between runs. As a spare battery, it focuses on the core requirement of the vehicle setup: the correct voltage, the correct connector and compatibility with the named Cage Fighter versions. In practical use, the battery can serve as a replacement for an existing pack or as an extra unit kept ready for the next outing with the model. The single included content is 1 spare battery, making it a straightforward choice when the setup calls for the stated 7.4 V LiIon format and JST connection.  Warning! Not suitable for children under 14 years.

RC tires & rims

TT02B Alum. Hex Adapter 12x9mm, model spare part

€9.99

The TT02B Alum. Hex Adapter 12x9mm brings a compact aluminium spare part set to model-building work where accurate fit and clean replacement parts matter. With 2 adapter blocks, matching screws and cylindrical pins, the set supports compatible TT02B assemblies with clearly defined hardware for rebuilds, maintenance, or parts changes. The parts are marked 12 mm and 9 mm, making the adapter sizes visible at a glance during workshop use. A clamp-style form with side and top slots allows the screws to tighten the blocks into position, while the metal construction adds a precise, technical feel suited to hobby-grade model work. The set is aimed at 14 Years+ and fits naturally into bench tasks where worn or missing drivetrain or wheel-mount hardware needs a direct replacement. As a model spare part rather than a complete vehicle, the focus stays on exact dimensions, fastening points, and compatibility within the intended setup. On the workbench, the 2 adapters and included hardware support straightforward parts swaps without guesswork over size. They also make a practical addition to spares storage for ongoing TT02B servicing, rebuild sessions, and planned upgrades across compatible model assemblies.

RC carrying bags

Vehicle Carrying Bag, RC transport bag, 55 x 30 cm

€17.99

This blue vehicle carrying bag brings RC transport and storage into one clear format, with a 55 x 30 x 35 cm footprint sized to hold a model between workshop, car and running location. The nylon outer material is water-repellent and gives the bag a practical layer against splashes and damp conditions during routine handling. The carrying system is built around all-round nylon handles that wrap around the entire bag, rather than relying only on stitched side points. That construction supports the bag more evenly when lifted and helps maintain stability under the weight of the contents. The blue finish is paired with Tamiya and Carson logos, giving the bag a recognisable motorsport look that fits naturally into an RC setup. 14 years marks the recommended age. Used as transport to the track, as a storage place between sessions, or as a way to keep one vehicle separate from other workshop gear, the bag supports a more organised RC routine. Its rectangular shape also makes it straightforward to place in a car boot, on a shelf, or beside a workbench when the model is not in use.

RC tires & rims

Virus Race/Beat Warrior Wheels, model wheels

€36.99

Virus Race/Beat Warrior Wheels brings a focused replacement set to the workshop with 4 matching wheels made for the named Carson models. The set is aimed at model-building enthusiasts who keep running gear in working order and want a direct component match instead of trial-and-error parts selection. Because the product data identifies these wheels specifically for Virus Race and Beat Warrior, the set fits naturally into routine maintenance, repair after wear, or a rebuild that needs the correct wheel group on hand. The 4-piece format covers a full vehicle wheel change in one pack, which keeps the swap straightforward when all corners need the same component. With the age marking of 14 Years, the set sits in the hobby-focused side of the range rather than general toy use. The concise designation also makes this a practical shelf spare for existing compatible models. In a workshop setting, the wheel set supports quick replacement before the next driving session or during a larger overhaul of a used chassis. It also suits parts storage for hobby collections where compatible running components are kept ready for service work.

Additional accessories

Virus XL body shell, 1:8 RC car body

€32.99

The Virus XL body shell brings 1:8 scale buggy styling to the chassis with a black and turquoise finish, a pre-painted surface and a matching rear wing. Tinted window areas, honeycomb graphics and the VIRUS 4.2 XL markings give the shell a sharp racing character that changes the look of the vehicle in a single swap. As a body part for the Virus XL, this set focuses on the outer components that define the model's silhouette. Alongside the shell, the set includes the rear wing, 2 washers, 2 screws and 2 metal body clips for fitting. The wing mounts as a separate aerodynamic element at the rear, extending the competition-style profile and completing the visual line from nose to tail. The black and turquoise layout keeps the finish consistent across shell and wing, while the shaped contours follow the aggressive off-road buggy form shown by the body. On the bench, this shell suits rebuilds, visual refreshes and replacement after hard running sessions. It also works well for hobbyists who want the Virus XL to return to a clean race-ready look with graphics and colour already in place.  Warning! Not suitable for children under 14 years.

RC tires & rims

Virus-Ex Alu-hex-hub 17mm spare part

€12.59

The Virus-Ex Alu-hex-hub 17mm is a dedicated spare part for the Virus Extrem platform and is matched to the Carson references 500409074 and 500409084. Its aluminium construction and 17 mm hex design place it in the wheel mounting area, where exact fit and secure mechanical connection matter during maintenance of an RC vehicle. The set shown consists of 2 red aluminium hub parts, 2 matching nuts, 2 metal pins and 2 black set screws. The threaded hub bodies, hex bases and side holes indicate a fastening layout that uses the included hardware to position and secure each part on the intended assembly point. This makes the set suitable as a direct replacement when original hub components are worn, damaged or missing. The red anodised finish also gives the mounted assembly a clear technical appearance that stands out against the surrounding chassis hardware. In workshop use, this spare part suits routine servicing, targeted repairs and the refresh of heavily used running gear on a Virus Extrem model. The 14 years marking is stated in the product data. Batteries are not included.  Warning! Not suitable for children under 14 years.

RC tires & rims

Wheel Nut Set, RC accessory, 4-piece hardware

€13.99

A complete wheel hardware refresh can make a clear difference during RC maintenance, and this Wheel Nut Set brings together 4 matching assemblies for that task. The set is presented as a compact RC accessory for model use, with each assembly combining a blue anodized metal part, a silver flanged lock nut, a black O-ring and a short cylindrical metal pin. That combination points to the wheel mounting area, where small fastening parts need to work together cleanly across all 4 corners. The blue metal components add a distinct machined element to the setup, while the flanged nuts handle the fastening role within each assembly. The included pins serve as locating or drive-related hardware at the axle connection, and the O-rings complete the set with the small retention parts often needed during service work. Instead of replacing one missing piece with a mismatched spare, the 4 coordinated assemblies keep the hardware consistent across the vehicle. On the bench, the set suits routine maintenance, rebuilds and parts replacement on RC models that use this style of wheel hardware. It also fits tuning projects where matching mounting parts across all wheel positions matter for a neat, uniform finish. Age 14 Years  Warning! Not suitable for children under 14 years.

Li-ion batteries

FE Line Replacement Battery, 7.4V Li-Ion Pack

€19.99

The FE line replacement battery combines 7.4 V output with 2600 mAh capacity in a Li-Ion pack built for compatible electric RC vehicle sets. With 19.24 Wh, it brings a clear energy figure to the setup and supports longer driving sessions when an older pack has lost punch. The battery is equipped with an XHP/TAM connector layout, matching the plug standard stated for the FE line and keeping the connection straightforward for the intended models. As a single replacement pack, it suits maintenance, backup use between runs, or a direct swap when the original battery no longer delivers the same runtime. The Li-Ion format makes this pack a focused choice for hobby users who want a defined voltage and capacity combination rather than a generic spare. In regular RC use, a second battery pack can keep driving sessions moving with less waiting between charges, while a fresh replacement helps bring stored models back into action. The stated 14 years+ age marking places this battery in the hobby segment, where connector type, voltage and capacity matter just as much as fit.  Warning! Not suitable for children under 14 years.

Li-ion batteries

XS Line Tuning Battery, replacement battery, 7.4 V

€19.99

The XS Line Tuning Battery brings a defined 7.4 V Li-Ion power source to compatible Carson Modelsport vehicles and combines 2600 mAh capacity with 19.24 Wh in a compact replacement format. Built as a battery pack with T-Plug and XHP connector, it is matched to the connection layout named for the XS Line. Its stated fitment covers the 1:10 XS Stadium Fighter 100% RTR in blue and orange as well as the 1:10 XS Offroad Fighter Cage 100% RTR in turquoise and rouge. That makes it a focused choice when an existing battery needs replacing or when a second pack is needed for the same compatible platform. The Li-Ion format defines the battery chemistry, while the 19.24 Wh rating adds a clear energy figure alongside the voltage and capacity data. The pack is also marked as fast-charging, with a maximum charging current of 1 C or 2600 mA. In workshop use, the connector combination helps keep the battery matched to the specified XS Line vehicles rather than a broad, uncertain range. For running sessions with the listed 1:10 models, the battery serves as a direct power component built around the exact voltage, capacity and connector details given in the data.  Warning! Not suitable for children under 14 years.

Li-ion batteries

XS-Line XHP/XT60 Li-Ion Battery Pack, 7.4V

€19.99

The XS-Line XHP/XT60 battery pack brings 7.4 Volt Li-Ion power into RC setups that rely on a compact, clearly specified energy source. With 2600 mAh capacity and XHP and XT60 connectors, it is built for compatible model-building electronics where the battery format and plug type need to match the vehicle layout. Li-Ion cell chemistry makes this pack a focused choice for hobby applications that call for rechargeable power in a manageable size. The 7.4V rating suits systems designed for that voltage, while the 2600 mAh capacity gives a concrete reference point when comparing runtime potential within compatible setups. The XHP and XT60 connector combination matters in practice because plug format determines whether the battery integrates cleanly with the existing wiring. Batteries are not included with many RC vehicles, so a separately chosen pack like this becomes a key part of getting a compatible chassis ready for use. On the bench, this battery fits into the preparation stage where voltage, capacity and connector standard have to line up with the electronics already in the model. At the track or on open driving surfaces, it serves as the power source that keeps a compatible RC vehicle running through each session.

LiPo batteries

7.4V 5000mAh LiPo Battery, spare battery, XT90

€47.99

This 7.4 V LiPo spare battery adds a straightforward power option for compatible RC setups that use an XT90 connector. With 5000 mAh capacity, it is built as a replacement pack for models that need a 2S battery in this specification, keeping the focus on matching voltage, connector type and battery format. The pack is stated as suitable for all 2S and 4S models with an XT90 connector, which gives a clear compatibility reference for hobby use across matching Carson model ranges. The 60C rating shown in the product data adds another technical point for enthusiasts comparing replacement packs for current delivery. The battery is supplied as 1 spare battery, so it can step in for an existing pack or expand the rotation for longer sessions with compatible vehicles. As a LiPo battery, it belongs in setups designed for this battery type and the stated 7.4 V specification. In practice, this spare pack suits workshop shelves, race-day kit bags and regular running sessions where a charged replacement keeps a compatible model ready for the next run. A charger is required separately.  Warning! Not suitable for children under 14 years.

Li-ion batteries

7.4V 1300mAh Li-Ion Battery, RC accessory

€17.99

A 7.4 V Li-Ion battery pack with 1300 mAh capacity brings a clear, usable power specification to compatible RC model setups. With an energy rating of 9.62 Wh, this Carson RC Sport accessory is aimed at hobby applications that need a dedicated rechargeable pack rather than a disposable power source. The stated values make battery matching more straightforward when a model is designed for a 7.4 V pack, and the 1300 mAh capacity defines the pack within a compact RC power class. As an accessory in the powered vehicle range, it fits naturally into workshop shelves alongside running gear and charging equipment for electric model use. The rechargeable Li-Ion format supports repeated use across driving sessions, whether the battery serves as a replacement pack or as part of a regular rotation between runs. Product data states that batteries are not included. In practice, this kind of pack suits hobby users who keep compatible RC vehicles ready for the next outing or maintain a second power unit for less downtime between sessions. The clearly stated 7.4 V, 1300 mAh and 9.62 Wh figures give model builders concrete reference points when checking fit within an existing electric RC setup.  Warning! Not suitable for children under 14 years.

LiPo batteries

11.1V 4500mAh 60C LiPo Battery, RC battery

€62.99

This 11.1 V LiPo spare battery brings a focused power upgrade to compatible RC setups, pairing 4500 mAh capacity with a 60C discharge rating for model use. The XT90 plug connection keeps the fit aligned with vehicles that already use this connector, while the hardcase format shown in the product image suits the demands of RC running and transport. Beyond the headline figures, the pack is built around a rechargeable LiPo format with 49.95 Wh stated on the label and a maximum discharge current of 270 A. The product image also shows a white balance connector alongside the main XT90 lead, supporting balanced charging with suitable equipment. Charging data on the label states a maximum charging current of 4.5 A, giving experienced hobby users a clear technical reference for setup and handling. As a replacement battery, it is intended for all 3S and 6S models with XT90 connector as stated in the product data. In practice, this battery fits naturally into workshop shelves, pit bags and regular running sessions where a compatible RC vehicle needs a fresh power pack on hand. Age marking: 14 Years.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow-plug Battery 1.2V 2000mAh Accessory

€14.49

Nitro RC engines rely on a dependable ignition source, and this 1.2 V glow-plug battery is built for exactly that task. With a 2000 mAh capacity, it serves as a dedicated power unit for compatible glow igniters in model workshop and trackside use. As a models supplies accessory, the battery fits naturally into RC maintenance and running equipment where engine starting is part of the routine. The stated 1.2 V output defines the electrical specification clearly, while the 2000 mAh figure gives a concrete reference point for capacity when planning charging cycles and spare equipment. The compact format of this kind of accessory makes it easy to keep alongside other nitro starting gear without taking attention away from the main model itself. No batteries are included. Whether used as a replacement battery for existing glow-plug equipment or kept ready as a spare for longer driving days, this accessory supports the practical side of nitro model operation. The age marking is 14 years, placing it within hobby-focused RC use where technical accessories and engine preparation are a regular part of the session.

RC brushless motors

1:10 Dragster Turbo Program Card, ESC accessory

€14.99

The 1:10 Dragster Turbo Program Card brings direct ESC setup control to the workbench, letting key drive parameters be changed through a compact wired unit instead of relying on menu-heavy programming steps. Its black housing, printed setting layout and BEC-style connection create a clear tuning tool for RC vehicle electronics. The card is designed to configure several core controller functions. Low-voltage shutdown can be set to 3.1 V, 2.9 V, 2.7 V or 0 V, while separate rows on the card cover acceleration, maximum braking force, maximum reverse force and response behaviour. Visible programme markings and status indicators on the face help keep each selected value easy to track during setup. Dedicated Programme and Reset controls support quick changes when testing different controller responses. Batteries are not included. In use, the card suits workshop tuning before a run as well as between sessions when a different brake balance, reverse setting or throttle reaction is needed. Age marking: 14 years. As an RC accessory for 1:10 applications, it adds a practical way to refine how an electric model reacts on the track or during general driving.

Chargers & charging cables

Expert Charger Twin LiPo, charger, USB-C 2A

€27.99

The Expert Charger Twin LiPo USB-C 2A is built for RC setups that run on 7.4V Lithium Polymer 2S packs and need a compact charging station with 2 channels. Powered through USB-C, the charger connects with the included USB-C to USB-C cable and charges 2 batteries simultaneously through its twin layout. Each channel uses the XHP balancer plug system, matching 2S LiPo battery formats used across many RC applications. A maximum charging current of 2 x 2A and output power of 18W give the unit a clear role as a practical bench or travel charger for regular battery rotation. Automatic shut-off adds a defined end point to the charging process once the cycle is complete. The charger, USB-C to USB-C charging cable and instructions are included. With 110-240 Volt input compatibility, the charger fits neatly into hobby spaces where compact equipment and straightforward handling matter. The dual-channel format suits driving days with a spare pack ready, workshop charging between runs, or keeping 2 matching batteries prepared for the next session.  Warning! Not suitable for children under 14 years.

Li-ion batteries

7.4 V Race Battery, RC battery, 3000 mAh

€38.99

A 7.4 V Li-Ion race battery brings dependable rechargeable power to 1:10 RTR model driving, with 3000 mAh on board for sustained running and a compact pack shape that suits hobby vehicle layouts. The hardcase format and attached leads give the battery a clean, workshop-ready setup for regular use in electric RC applications. The pack uses a Tamiya plug as the main connection, making it a practical match for compatible RTR systems that rely on this connector standard. Its Li-Ion cell chemistry combines the stated 7.4 V output with a 3000 mAh capacity in a rechargeable drive pack aimed at model sport use. The rectangular case keeps the battery block contained in a defined footprint, while the cable layout supports clear routing inside a chassis. As a replacement pack or an additional battery for driving sessions, it adds a straightforward power option for compatible 1:10 electric models. In the workshop, the battery suits routine prep before a run, whether a chassis is being readied for casual driving or kept charged as a spare between sessions. On the track or in open driving areas, the combination of Li-Ion chemistry, 7.4 V output and 3000 mAh capacity supports consistent RC use with a connector format already common in RTR setups.

RC chassis & attachments

Antenna Tube Black 4Pcs Model Accessory

€3.29

Antenna Tube Black 4Pcs is a model accessory set for RC vehicle setups that need a simple, clean guide for antenna routing. The pack contains 4 matching black antenna tubes, making it suitable as replacement stock for maintenance, rebuilds or fresh installations on compatible models. The slim tube format supports upright antenna placement and helps keep the wire path clearly defined on the vehicle. The black colour sits unobtrusively against many body shells and chassis layouts, which suits builds where a restrained, technical look matters as much as function. With 4 pieces in one pack, the set also covers repeated workshop use when several vehicles need the same small fitting. In day-to-day hobby use, antenna tubes are often the kind of part needed at short notice after repairs, body changes or general wear. This set fits naturally into spare-parts storage for model benches, pit boxes and maintenance kits where small RC fittings need to be ready when a compatible vehicle is being prepared.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH/LiPo 4A, RC charger, 50W

€45.99

The Easy Charger NiMH/LiPo 4A brings fast, controlled battery charging to RC workbenches and race-day setups with 50 W output power and 4 selectable charging levels. Compact dimensions of 108 x 68 x 38 mm keep the unit easy to place beside tools, spares and running gear while charging sessions stay clearly focused on the battery in use. NiMH packs with 4 to 8 cells and LiPo batteries from 2 to 4S are supported, covering common drive-battery formats used in many radio-controlled models. The charging process can be set to 0.5 A, 1 A, 2 A or 4 A, which helps match the charger to different pack capacities instead of relying on a single fixed rate. Delta Peak cut-off is integrated for NiMH batteries, adding a defined stop point during charging. AC 100-240 V input allows connection to standard mains power across a wide voltage range. Included contents are the charger, power cable, XT60 to Tamiya adapter cable, XT60 to XT90 adapter cable and manual. At 231 g, the unit stays easy to carry between shelf, pit table and home setup, where compact size and broad battery support help keep RC sessions moving with less downtime between runs.  Warning! Not suitable for children under 14 years.

LiPo batteries

Easy Skydreamer LiPo Battery, spare battery 3.7V

€7.99

The Easy Skydreamer uses a compact 1-cell power pack, and this spare battery matches that format with 3.7 V, 150 mAh and a Molex connector. As a replacement part for models 500505035 and 500505036, it is built for the named aircraft rather than as a generic battery across unrelated RC ranges. Its LiPo construction and 0.55 Wh rating place it in the lightweight class used by small radio-controlled flyers, where low mass and the correct connector matter as much as voltage. The red and black leads run to a white 2-pin plug, giving the battery the connection layout shown for the pack itself. The set includes 1 spare battery, so the focus stays on the essential replacement component. Age marking: 12. In regular RC flying sessions, a matching spare pack helps keep the compatible Easy Skydreamer ready for another run after the original battery has been used. It also serves as a like-for-like replacement when the existing pack needs to be exchanged, keeping the electrical specification aligned with the intended model setup.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH/LiPo 4A, charger, 50W

€44.99

The Expert Charger NiMH/LiPo 4A brings compact charging control to RC bench setups with support for LiPo, LiHV, LiFe and NiMH battery types. With selectable current levels from 0.5A to 4A and a maximum output of 50W, it covers everyday charging tasks from smaller packs to higher-demand battery routines. Its cell support spans LiPo 2-4S and NiMH 5-8 cells, giving the charger a useful range for different vehicle classes and battery formats. The front-panel operation is built around clear mode and current selection, while the status LED keeps the charging state visible during use. Automatic shut-off completes the process once charging is finished, adding a practical control feature for regular workshop use. Input voltage from 110V to 240V allows connection to common mains supplies without extra complexity. Included components are the charger, a mains cable, 1 adapter cable XT60 to NiMH, 1 adapter cable XT60 to T-plug, and instructions. On the workbench, in the hobby room or alongside RC running sessions, this charger fits neatly into battery care routines where several pack types and connector formats need one compact charging solution.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger LiPo 2.2A, charger, 25W

The Expert Charger LiPo 2.2A brings a compact charging station to the RC workbench with up to 2.2A charging current, 25W output power and support for Lithium Polymer battery packs. A clear status LED keeps the charging state visible during setup, storage preparation or the gap between driving sessions. Its operating range of 110V to 240V suits common mains connections, so the charger fits easily into home hobby spaces as well as club or event use. Charging support covers 1 x 2S and 1 x 3S packs, giving the unit a defined place in many electric model setups without adding unnecessary complexity. Automatic shut-off ends the process once charging is complete, adding a clear functional safeguard based on the charger's own control cycle. The included contents are the charger, a mains cable and instructions. On a bench beside an RC car, buggy or other electric model, the compact format keeps battery care straightforward and easy to integrate into regular running routines. The focused specification makes it a useful choice where compatible LiPo packs need a dedicated charger with clear status indication and a simple operating concept.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Tenzu, replacement battery, 7.4V Li-Ion pack

€19.99

The Tenzu replacement battery is specified as a 7.4V Li-Ion pack with 1200 mAh capacity, giving compatible RC vehicle setups the exact electrical format named in the product data. As a dedicated spare battery, it fits naturally into hobby use where one pack is in the model while another is prepared for the next session. Its ShortDescription identifies the pack directly as a Tenzu battery, while the replacement designation makes its role clear within an electric RC setup. The 7.4V voltage and 1200 mAh rating provide concrete reference points when matching the battery to the required system, avoiding guesswork around the power format. Because this is a battery-only offering, the focus stays on the core specification rather than bundled extras. The Li-Ion construction places it in the rechargeable battery category used across many modern RC applications. In practice, this battery suits the bench as a ready spare and the field as a quick swap option for compatible models. The 14 Years age marking is stated in the data, aligning this power component with hobby-oriented RC use rather than toy-style entry products.

RC tires & rims

1:8 Tire Set Off-Road XL, wheels

€22.99

Loose dirt, gravel and broken ground call for a tread that can dig in, and this 1:8 Tire Set Off-Road XL brings that focus to RC buggy running with 2 complete wheels. Each wheel arrives glued and fitted with a foam insert, combining tyre, insert and rim in one ready-to-mount unit for 1:8 applications. The set is built around an off-road XL tread pattern with pronounced outer blocks and a knobby contact surface shaped for uneven terrain. Inside the tyre, the foam insert supports the carcass under load and helps the wheel keep its form as the buggy accelerates, brakes and changes direction on rough surfaces. The black multi-spoke rims use a 17 mm hex wheel hub standard, giving the set a clear fitment reference instead of a vague universal claim. The data names compatibility with CARSON 1:8 buggies in the Virus XL and Akuma lines. As replacement running gear, these complete wheels suit maintenance after tread wear, damage from hard terrain, or a setup change toward looser ground. Age marking: 14 Years. The pair format keeps front or rear axle changes straightforward when a buggy needs matching wheels for the next dirt session.

RC brushed motors

Electric Motor 540 23T-CB, RC motor

€12.99

The 540 23T-CB Cup Machine brings classic brushed RC drive hardware into a compact motor format with clearly stated performance data for hobby bench planning and drivetrain matching. With a nominal voltage of 6 V, a usable voltage range from 4.8 V to 8.4 V and a peak rotational speed of 23,000 rpm, this motor suits projects where the drive setup needs to be chosen around known figures rather than guesswork. The cylindrical can design uses a front output shaft for connection to the drivetrain, while the attached red and black leads provide the power connection straight from the motor. At maximum efficiency, current consumption is 1.95 A with 61.1% efficiency. A second operating point is also specified with 16,400 rpm, 1.69 Ncm torque, 8.7 A current consumption and 28.8 W output, giving model-building enthusiasts several concrete values to compare when selecting gearing, electronics and running characteristics. On the workbench, these figures help frame a replacement build, a tuning change or a fresh RC vehicle setup with more confidence. In running use, the 540 format and defined voltage window make the motor a practical choice for hobby applications that need a brushed drive unit with stated electrical and mechanical data.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger Allrounder, charger, 2A LiPo NiMH

€29.99

The Expert Charger Allrounder brings compact charging control to RC hobby setups with support for lithium and NiMH battery packs, 2A maximum charging current and 16W maximum output power. Its 100-240V input voltage allows connection to common mains supplies, while the compact charger format keeps the bench setup focused on the charging task itself. The XHP balancer plug-in system is designed for lithium packs and works with the balancer function to support gentle charging across 2-3S configurations. NiMH packs are also covered, with compatibility for 4-8S battery types, so one unit can serve different power systems used in model driving. A multifunction LED layout and 3 control buttons on the charger provide clear operating feedback during the charging process. The included charging cable with Tamiya plug connects the charger to compatible battery packs, and instructions are included in the contents. Between driving sessions, the charger fits naturally into the regular rhythm of RC use, whether a single pack needs topping up before the next run or several compatible packs are charged in turn. Automatic shutdown ends the process when the battery is fully charged, giving each charging cycle a clear finish for workshop and trackside preparation.  Warning! Not suitable for children under 14 years.

Light & sound

LED Light-Set 2+2 by Radio, light set, 4.4-6V

€12.99

Radio-controlled lighting adds a clear functional upgrade to an RC model, and this LED Light-Set 2+2 by Radio brings that effect with a compact harness built around 2 red and 2 white LEDs. The transmitter-switchable setup works on 4.4-6V and connects through a 3-pin plug, making it suited to model layouts that already use radio-based control functions. The bundled wiring harness groups the cabling in a tidy central sleeve, with red, black and white leads feeding the light modules and connector in one compact arrangement. That layout helps keep the electronics organised inside the body shell while separating front and rear lighting by colour. The 2 white LEDs suit forward lighting positions, while the 2 red LEDs fit rear placements for a more defined running appearance. The set is an accessory for hobby users aged 14 years and up who want to add a controllable lighting function rather than a fixed always-on setup. Installed in a compatible RC vehicle, the harness supports visible light changes directly from the transmitter during driving sessions. It suits builds that need a clean electronic add-on with front and rear light points, whether for finishing a fresh model or updating an existing chassis with radio-switched illumination.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

1:87 USB Four Point Charger Unit, charger

€39.99

The 1:87 USB Four Point Charger Unit brings a tidy charging hub to compact model fleets, with 4 charging outputs rated at 4.2 V / 50 mA each and a single 5 V / 1 A USB input. Set on a shelf, desk, or workbench, the station keeps several compatible miniature vehicles gathered in one clearly organised place instead of spreading chargers and cables across the hobby area. Its four-point layout is built for enthusiasts who rotate multiple 1:87 models between use and display. The charging station is included, along with the instruction manual, and the USB-powered format keeps the setup straightforward when a standard USB source is available. The 1:87 designation makes it a focused accessory for small-scale vehicle collections rather than a general charger for mixed formats. With several charging positions arranged on one base, the station supports a more structured routine for storing, charging, and preparing compatible models. In a collection cabinet, it creates a dedicated service point for miniature vehicles between runs. On a hobby bench, the compact unit helps keep compatible 1:87 models together and ready for the next session, whether the fleet includes a single favourite vehicle or several regularly used models.

Light & sound

LED Light-Set NEO FIGHTER, RC accessory

€14.99

This LED Light-Set brings a Tamiya DT03 or TT02B buggy into low-light action with a front and rear lighting layout made for the NEO FIGHTER and SAND SCORCHER. The set uses 2 white LEDs at the front and 2 red LEDs at the rear, creating a clear visual contrast that stands out on darker indoor tracks and evening running sessions. The connection is straightforward: the black plug goes into a free socket on the receiver, and the inline switch controls the light set directly on the vehicle. At the front, the round headlight mounts are positioned over the bumper bracket after the screws are released and the wishbone mounting bracket is removed. At the rear, the light unit attaches beneath the spoiler either with the supplied screws or with the adhesive pad. For screw mounting at the rear, the required hole spacing is 71 mm. Cable ties are included to route the wiring along the chassis and keep the installation tidy. Once fitted, the illuminated front section throws visible light ahead of the buggy, while the red rear LEDs sharpen the model's outline from behind during driving or static display. Age 14 Years. A receiver with a free socket is required on the compatible model.  Warning! Not suitable for children under 14 years.

Model varnishes/ adhesives

Paint Killer Color Remover, model paint stripper

€10.991 l = €109.90

Paint Killer is a dedicated colour remover for painted models, built for the moments when a finish needs a second chance. The 100 ml liquid removes X and XF paints, AS and TS spray colours, and PC and PS Lexan colours, opening the way for clean corrections on shells, bodies and other model parts. Its range extends beyond those paint lines to other paint systems up to 2-component paints, which makes it useful across different model-building projects on the workbench. The remover is stated for use on plastic, Lexan, resin, metal and model glazing, so the same bottle can support work on body shells, aircraft parts, tank components and clear sections. Trials cited in the product data report that even 10-year-old Tamiya Color acrylic paint can be removed from tanks, planes or similar models. That gives older builds a route back into the paint booth instead of leaving earlier mistakes locked under ageing colour layers. In practice, Paint Killer suits restoration work, spot correction after a paint mishap, and full stripping before a new finish is applied. A model car body with older PC or PS colour, a tank with dried acrylic layers, or a resin detail part with an unwanted coat can all be prepared again for a cleaner next pass.  Warning! Not suitable for children under 14 years.

RC remote controls

RA 4Ch Reflex Wheel Pro 4, RC transmitter

€59.99

The RA 4Ch Reflex Wheel Pro 4 2.4GHz LCD brings a compact pistol-grip layout, 4-channel control and a clear display into one radio system for RC driving with precise steering and throttle input. Its angled 4° steering wheel position, ball-bearing control unit and carbon structure shape a focused handling feel at the transmitter itself while the blue-lit LCD keeps setup values readable at a glance. Two channels work fully proportionally for finely graded control, while channel 3 can be programmed as a switch or button function and channel 4 uses a 3-level switch. The transmitter operates at 3.6-4.5 V, and the receiver accepts 3.5-10 V without a BEC, which broadens the range of compatible model installations. A failsafe function adds a concrete control safeguard if signal is lost. The system also stores settings for up to 15 models, which helps keep separate configurations ready for different vehicles instead of resetting trim and response values each time. Included are the 4-channel 2.4 GHz transmitter, a 4-channel mini receiver and instructions. 4.8-6 V operation and the compact receiver format suit hobby setups where steering, throttle and auxiliary functions need one coordinated radio system for track driving, car park sessions or workshop tuning between runs.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Rossi R3 Glow Plug, engine part

€8.49

The Rossi R3 glow plug is a compact engine part for model-building enthusiasts working with nitro-powered RC setups. Its threaded metal body screws into the engine head, while the included copper sealing washer sits at the seat to help create the required seal during installation. The marked medium heat range identifies the plug as an R3 specification for balanced running conditions in compatible model engines. As a service and replacement part, this glow plug belongs in the regular maintenance cycle of combustion-powered RC vehicles and other model engine applications that use this format. The contact tip and threaded section are shaped for direct fitting into the engine head, giving workshop routines a clearly defined spare for worn or spent plugs. In practical use, the plug supports the ignition process inside the engine, where the heated element works with the fuel mixture during starting and running. Whether the task is routine upkeep, replacing a used plug before the next session or stocking core workshop spares, the Rossi R3 adds a concrete engine consumable to the bench. Age marking: 14 Years. The set includes the glow plug and 1 copper washer.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Viper Micro Marine, speed controller, waterproof

€40.99

The Viper Micro Marine speed controller brings compact electronic control to RC boat setups with a 26 x 25 x 9 mm format, 23 g weight with cable, and a fully waterproof design for marine running conditions. Its layout is built around direct installation, with wires already attached and an external on-off switch included on the harness. This controller is specified for 5 to 10 NiMH cells and an operating voltage of 6 to 12 V, making it suitable for a wide range of compact electric marine configurations. The motor limit of 10 Turn defines the drive range it is designed to handle, while the 1.0 KHz frequency and 1.5 A BEC output round out the technical package. Brake and adjustable braking point are not provided here; the focus stays on forward and reverse control with a simplified operating concept. All adjustments are handled through one setup button, keeping programming concentrated in a single control input. In use, that combination suits hulls where installation space is limited and wiring needs to stay orderly around battery, motor and receiver connections. The waterproof build, integrated control protections and compact dimensions make it a focused choice for electric marine models that need a small controller with clear setup logic.

RC tires & rims

1:10 Buggy-Tire/Wheel Set, RC wheels, all terrain

€20.99

A 1:10 buggy gains a clear off-road focus with this Buggy-Tire/Wheel Set in an all-terrain layout, combining black tyres, chrome rims and a 2+2 wheel arrangement for front and rear fitment. The mounted wheel format brings the running gear together in one ready-prepared set and gives hobby benches a quick route to a fresh buggy setup. The tread pattern uses pronounced blocks that suit loose and uneven ground, where a buggy needs defined contact points rather than a smooth on-road surface. The rim design shown in chrome adds a technical contrast against the black tyre finish, giving the vehicle a sharper race-style appearance once fitted. As a wheel and tyre combination rather than separate loose parts, the set also reduces preparation steps when replacing worn running gear or keeping an extra set ready for changing conditions. The 1:10 format makes it a relevant choice for model-building enthusiasts working within that scale class. On gravel tracks, compacted dirt or rough hobby terrain, a fresh wheel set can change how a buggy presents itself and how quickly it is prepared for the next outing. Age 14 Years. This set suits workshop stock, replacement use and visual upgrades for compatible 1:10 buggy builds.

RC remote controls

FS 3K Reflex Wheel Pro 4 2,4GHz

€45.99

The Carson RA 3Ch Reflex Wheel Pro 4 2.4GHz (500500110) is an ergonomic 3-channel remote control with 2.4 GHz system, nano receiver and instructions. For model building fans, it offers two infinitely variable proportional channels, programmable channel 3, servo reverse, trim and dual rate functions, LED battery indicator, failsafe, ball bearing steering wheel and operating voltage 3.6-4.5 V. Not for children under 14 years.   Warning! Not suitable for children under 14 years.

Light & sound

LED Light Stick Set blue, lighting set, 4.8-6V

€14.99

Blue accent lighting has long been part of the tuning look in RC scenes, and this LED Light Stick Set blue brings that effect into compact model builds with 2 slim light bars and a ready-wired connection. Designed for 4.8-6 V systems, the set adds a clear blue glow that suits body edges, underbody sections or interior areas where visible light changes the whole presence of a model. Each light stick uses a narrow strip format that fits into tight installation points, while the red and black leads and the 2-pin connector give the wiring a direct, workshop-style layout. The illuminated bars show multiple surface LEDs arranged in a row, creating an even line of light rather than a single point source. That makes the set useful for custom car shells, drift bodies, on-road racers or other hobby projects where lighting is part of the finished look. The 2-piece format also supports symmetrical placement across left and right sides. In use, the blue glow can frame wheel arches, highlight side sills or add depth to cabin and chassis areas during evening runs or shelf display. For model builders aged 14 years and up, the set offers a focused way to add electronics-based styling detail without changing the core character of the build.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Multi-Charger Cable 8in1, charger cable, XT-60

€10.99

The Multi-Charger Cable 8in1, XT-60 brings 8 charging connections into one compact harness for RC and model-building setups. An XT-60 connector forms the input, while the split lead layout branches to crocodile clips, Futaba, BEC, T-Plug, XT90, XT60, Tamiya and Mini Tamiya for broad charger-to-battery compatibility across common hobby formats. The harness layout keeps the different connector ends available in one place instead of spreading separate adapters across the workbench. Red and black power leads make polarity routing easy to follow during charging tasks, and the central heat-shrink bundling keeps the cable group together while the required connector is selected for the battery in hand. This makes the cable a practical link between chargers and packs that use different plug standards in the same RC collection. On the bench, the cable suits charging sessions that move between several battery types without swapping a separate adapter each time. The 14 Years age marking places it in hobby-oriented model and RC environments where connector variety is part of regular workshop use.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

Reflex Wheel Pro 4 Gyro Receiver, 4-channel

€32.99

The Reflex Wheel Pro 4 Gyro receiver brings 4-channel radio control and integrated gyro support together in one compact module for RC model setups. Its black housing carries clearly printed CH1, CH2, CH3 and CH4 markings, making the connection layout easy to read during installation and helping keep each assigned function in order inside the vehicle. The unit is part of the Reflex Series Pro 4 range and includes dedicated Pair and FS markings directly above the connector area. That layout keeps binding and failsafe functions tied closely to the receiver body instead of leaving key setup steps to guesswork. Built-in DEC and INC controls add direct access to adjustment changes on the module itself, which is useful when fine-tuning the gyro response in a workshop setting. The compact rectangular form also suits tighter chassis layouts where electronics need to sit neatly alongside steering and drive components. In practical use, this receiver fits hobby builds that need organised channel assignment and onboard adjustment access in one place. The 14 Years marking identifies the recommended age, while the receiver format suits model-building enthusiasts working on compatible RC vehicles and electronics installations.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€75.99

The Reflex Wheel Pro 4 brings 2.4 GHz control, LCD-based setup and a compact 4-channel layout into one radio set for model vehicle builds and upgrades. A wheel-style transmitter, 4-channel mini receiver and 6 kg servo with metal gearbox form the included control package, giving hobby projects the core hardware needed for steering, throttle and auxiliary channel operation. The transmitter runs on 3.6-4.5 V and offers 2 infinitely variable fully proportional channels for precise input, plus 2 switchable channels for added functions. Channel 3 can be programmed as a switch or button function for a servo, while channel 4 uses a 3-level switch. A ball-bearing control unit supports accurate steering input, and the steering wheel sits at a 4° angle for a more natural hand position during longer driving sessions. LED battery status indication keeps the transmitter power level visible at a glance. For setup work, the system adds trim for throttle and steering, servo reverse on channels 1 and 2, and dual rate to limit servo travel or reduce speed response. Expo and ABS functions expand tuning further for different vehicle layouts and track conditions, while 15-model memory helps keep settings organised across multiple RC machines. The waterproof nano receiver broadens installation options in demanding vehicle builds.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Speed Controller Dragster Brushed 70A, ESC

€32.99

The Speed Controller Dragster Brushed 70A brings precise throttle control to brushed RC setups in a compact 34.5 x 30.2 x 18.7 mm format with a weight of 39 g. Its splash-proof design and dust-proof housing broaden installation options beyond land vehicles, including boat applications where moisture resistance matters. This electronic speed controller is built for brushed 540 and 550 motors at 18T or below 30000 rpm at 7.2V, giving model builders a clear technical match for common 1:10 platforms. Forward current is rated at 70A continuous and 360A peak, while reverse reaches 40A continuous and 180A peak. Automatic throttle calibration simplifies setup, and the integrated capacitor supports stable operation. Battery type and drive mode are selected by jumper pin, with settings for LiPo or NiMH and operating profiles for Boat, F/B/R and Crawler. An integrated on/off switch and receiver lead complete the wiring layout between battery, motor and receiver. Included are the Dragster Brushed 70A speed controller and a Tamiya/T-plug adapter. For installation and operation, radio gear, a battery pack and a charger are required separately. In a buggy, crawler or boat, the controller gives brushed power systems a defined, configurable control centre for varied terrain and driving styles.

RC tires & rims

1/10 Super Gripp, wheel set, 4WD RC wheels

€25.79

The 1/10 Super Gripp 4WD wheel set brings a ready-matched running setup to RC off-road models, combining 4 wheels with an assertive square-pin tread pattern and white dish rims. The mounted design gives 1/10 4WD chassis a direct route to fresh rolling gear, with the black tyres and bright rims creating the classic buggy look seen at dirt tracks and loose-surface runs. Across the tread face, the closely packed pin blocks create many contact points that can dig into softer ground and support controlled acceleration and braking on changing terrain. The 4WD layout note makes the set relevant for models that need equal wheel equipment at all 4 corners, rather than a mixed front and rear arrangement. In use, a full 4-piece set also helps keep wear, grip response and visual finish aligned across the chassis. The white dish wheel style adds a familiar competition-inspired appearance while keeping the focus on the tyre profile and contact patch. Whether the task is replacing worn running gear before the next session or keeping a spare set ready in the workshop, this wheel set covers the complete vehicle in one pack. On compacted dirt, loose track sections or general off-road running areas, the tread pattern is built around traction-focused RC driving rather than smooth on-road rolling.

RC tires & rims

1:10 Design 10 wheel set, model wheels, red

€22.99

A 1:10 wheel set can change the whole stance of a model car, and this Design 10 version does it with 4 matching wheels in metallic red. The multi-spoke layout and black tyres create a clear motorsport look that suits track-focused builds, replacement work and visual tuning projects. The set is specified at 26 mm width, giving a concrete reference for model builders matching wheels to an existing chassis or bodyshell. Each wheel follows the same Design 10 spoke pattern, so the finished car keeps a uniform appearance from front axle to rear axle. The red finish adds contrast on darker paint schemes, while the mounted black tyres make the set useful for direct wheel changes instead of sourcing rims and tyres separately. As an accessory in the Models Supplies range, this wheel set fits naturally into workshop stock for rebuilds, refreshes and style updates on 1:10 RC car projects. On a touring car, drift build or display-focused shelf model, the red rims shift the visual balance immediately and give the chassis a sharper custom look. Age 14 Years is stated in the product data, placing this accessory in the hobby segment rather than as a general toy part.

Chargers & charging cables

Charging Cable Reflex Wheel/Stick II/Pro

€9.29

This charging cable links compatible Carson Reflex transmitters to the matching charging connection with a simple adapter layout. One end uses a DC barrel plug, while the other end carries 2 banana plugs with red and black sleeves, creating a clearly assigned polarity setup for workshop charging routines and RC equipment storage. The cable is specified for Reflex Wheel X, Reflex Wheel Pro, Reflex Wheel Pro II, Reflex Wheel Pro III, Reflex Stick II and Reflex Stick Multi Pro. That model-specific fit makes it a practical replacement lead when an original cable is missing, and a useful spare for keeping radio equipment ready between driving sessions. The molded strain relief at the barrel connector supports the transition from plug to wire, while the short cable format stays easy to pack in a field box, tool case or charging area without adding bulky hardware. On the workbench, in the pit area or alongside stored transmitter gear, this lead adds the exact connection needed for the listed Reflex series. Age marking: 14 Years.  Warning! Not suitable for children under 14 years.

LiPo batteries

Cyber Drone LiPo Battery, replacement battery, 3.7V

€9.99

More airtime starts with the right power source, and this 3.7 V lithium-polymer replacement battery is made specifically for the Cyber Drone series. With 600 mAh capacity, compact 49 x 22 x 7 mm dimensions and a weight of 14 g, it fits the flight setup without adding unnecessary bulk during take-off, hovering and directional changes. The battery is designed for several Cyber Drone versions named in the range, including Police, Space Taxi and the green, orange and red variants. Its factory-installed JST connector keeps the connection straightforward when a fresh battery is needed between flights. As an original replacement battery, it serves as a practical spare for keeping one pack on charge while another is ready for use. The lithium-polymer format supplies the voltage required for the drone's regular operating characteristics, supporting consistent power delivery across repeated sessions. In use, a charged spare battery helps keep flying sessions moving with shorter interruptions at the charging station. Age recommendation: 14 years and up. This makes the battery a useful addition to the Cyber Drone setup for longer practice runs, repeated manoeuvres and more time in the air with the same model.

RC electric motors & controllers

ESC tio Marine 30, brushed marine speed controller

€51.99

Built for RC boat use, the tio Marine 30 is a brushed marine speed controller that combines 6 to 12 V operation with a 30 A motor limit for DC brushed motors. Its fully waterproof design suits running conditions where spray, splashes and wet decks are part of the setup, while the compact controller body connects battery and motor through clearly marked positive and negative leads. The control system uses 4 quadrant operation, so the motor stops completely before changing into the opposite direction. That sequence creates balanced response around the neutral position and supports precise manoeuvring at low speed. Reverse can also be switched on or off, allowing either forward and reverse running or a forward-only mode with brake function. Programming and calibration are handled through the set button and LED signals, with separate indications for neutral, forward, reverse, battery selection and failsafe mode. The controller is compatible with LiPo as well as NiCAD, NiMH and lead acid battery packs. In a model boat, that mix of directional control and battery flexibility suits everything from careful harbour-style manoeuvres to steady throttle changes on open water. When signal loss occurs, the built-in failsafe returns the controller to neutral, and the added protection functions help manage motor stall, short circuit and overheating during demanding sessions.

RC combustion engine models

Fuel Bottle 500 ml, filler bottle, measuring scale

€6.99

The Fuel Bottle 500 ml brings a straightforward workshop tool to nitro gasoline RC preparation, combining a 500 ml capacity with a narrow dispensing setup for controlled tank filling. Its translucent bottle body, black screw cap and long blue nozzle create a clear, functional layout that suits bench work before a driving session. Volume markings from 100 to 500 ml are embossed along the side, so the current fill level stays visible while handling fuel. The curved nozzle is shaped for access to tighter tank openings, and the small black angled tip helps place the flow more precisely at the inlet. Hand pressure on the squeeze bottle controls the output directly, which supports measured transfer instead of a broad pour. The cap closes the nozzle when the bottle is not in use, keeping the setup ready between workshop tasks. 1 x tank filler bottle is included. On the workbench, the bottle fits routine filling, topping up and checking quantities before a run. At the track, the marked body and directed nozzle support quick pit preparation when nitro RC models need a clean refill between driving sessions.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow Plug R1, engine accessory, extra hot

€6.79

The glow plug is the ignition point at the heart of a nitro model engine, and this R1 version is specified as extra hot for setups that call for a very hot heat range. Its ultrashort format keeps the part compact, making it suited to engine heads and surrounding layouts where space is limited. As a replacement engine accessory, the plug is designed to thread into the engine head and ignite the fuel mixture during running. The included sealing washer sits between the plug and the engine head to support correct seating at installation. The metal plug body and compact threaded form place it firmly in the technical side of model maintenance, where the right spare part matters for consistent running and service work. The product data states an age marking of 14 years. This kind of component fits naturally into workshop routines such as replacing a worn plug, refreshing an engine before the next run, or keeping a spare in the pit box for tuning changes. In hobby use, a clearly specified R1 extra hot plug gives model enthusiasts a concrete option when an engine setup calls for this heat rating.  Warning! Not suitable for children under 14 years.

Light & sound

LED Light-Set 4+4 by Radio, light set

€14.99

LED Light-Set 4+4 by Radio brings transmitter-controlled lighting to RC model setups with 4 white LEDs, 4 red LEDs and an operating range of 4.4 - 6 V. The wired layout supports a clear front and rear light arrangement and adds a functional detail that suits hobby builds with radio-based control. The harness connects the 8 LEDs through a compact plug system, making it suitable for integrating lighting into compatible model vehicles and accessory-focused builds. White and red light points allow a distinct separation between front and rear positions, which helps the finished model read more clearly during driving sessions or display placement. The cable routing gathers the individual light leads into one organised layout, which supports cleaner installation across body sections or mounting points. Minimum age: 14 years. In use, the set suits RC cars and similar model projects where lighting is part of the overall electronics package. Combined with a compatible radio setup, the switchable function adds direct control over the light output and gives the model a more complete road or track-style appearance.  Warning! Not suitable for children under 14 years.

Light & sound

LED Street Light Unit, light set, for 1:10 models

€27.99

The 1:10 LED Street Light Unit brings realistic vehicle lighting functions to compatible scale models with a compact controller, multiple LED outputs and a wiring layout made for RC installation. Front lights, rear lights, brake lights, reverse lights and left-right turn signals can be simulated through dedicated 3 mm and 5 mm LEDs, giving the model a more lifelike look when steering and throttle inputs change. The unit operates on 4-6 V DC and draws a maximum of 210 mA, which keeps the electrical requirements clearly defined for matching electronics. FUTABA plug system compatibility for TAMIYA models supports straightforward integration into suitable setups. The connection layout links the module with receiver, servo and ESC, so the lighting reacts through the vehicle's control system rather than acting as a simple constant-on lamp set. Demo mode starts when the transmitter is switched off, allowing the installed lighting functions to be checked directly on the bench. With dimensions of 42 x 32 x 13 mm and a weight of 44 g, the controller suits scale builds where installation space matters. Age 14 Years. This light unit fits hobby projects that aim for more detailed road-car presentation, whether the focus is a fresh body shell build, an electronics upgrade or a more convincing parked display between driving sessions.

Remote-controlled systems

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€134.99

The Reflex Wheel Pro 4 set brings core RC electronics together in one 2.4 GHz package built around a 4-channel pistol-grip transmitter, matching mini receiver, 6 kg metal-gear servo and brushless set. The transmitter uses 2 infinitely variable fully proportional channels and 2 additional switchable channels, opening the door to steering, throttle and extra vehicle functions from a single handset. Its LCD interface supports direct setup work for hobby-grade driving, with servo reverse on channels 1 and 2, trim for throttle and steering, dual rate adjustment, Expo and ABS functions, and 15-model memory for running more than one vehicle without rebuilding settings each time. Channel 3 can be programmed as a switch or button function, while channel 4 uses a 3-level switch. An LED battery status display keeps the transmitter power level visible during use. The transmitter operates at 3.6-4.5 V, and the receiver power supply is rated at 3.5-10 V without a BEC. On the vehicle side, the waterproof nano receiver and compact electronics suit tight chassis layouts, while the brushless set adds the drive hardware needed for responsive running. The included instructions complete the set. With 14 Years as the stated age marking, this package fits hobby sessions focused on tuning steering feel, throttle response and auxiliary functions for track, touring or general RC driving.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel Start, radio control, 2.4 GHz

€34.99

The Reflex Wheel Start brings classic wheel-style RC control into a compact 2.4 GHz system with a black pistol-grip transmitter and matching 3-channel mini-receiver. A large side steering wheel and trigger layout create the familiar handling used in many RC car setups, while the wireless link supports clean installation in compatible models. Two fully proportional channels allow gradual steering and throttle input instead of simple on or off commands. Servo reverse changes the travel direction when a steering or throttle servo moves the wrong way after installation, and the trim functions for both gas and steering help centre the model accurately. Dual rate on both channels makes it possible to limit servo travel, which is useful when a setup needs reduced steering throw or a calmer response. The transmitter operates on 4.8 to 6 V, and receiver powering without BEC is possible up to 11 V. The Uni connector system supports Futaba and Graupner-J/R layouts, adding flexibility for different hobby setups. An LED battery status display keeps the transmitter power level in view during driving sessions or bench setup. The integrated failsafe adds a concrete control feature for RC use, and the included transmitter with mini-receiver forms a practical entry point for 14 years and up.  Warning! Not suitable for children under 14 years.

RC brushless motors

1:10 Dragster Turbo 4370KV, brushless set

€69.99

The 1:10 Dragster Turbo 4370KV brushless set brings a matched sensorless drive package to RC car builds that call for sharp acceleration and high top-end speed. The combination of an 8T brushless motor and a waterproof electronic speed controller is designed for 1:10 applications, with the motor rated at 4370KV and up to 488W for fast-revving on-road setups and hard-charging off-road runs on suitable battery combinations. The controller is specified for 60A continuous current and 360A peak current, with 0.0007 Ohm resistance, 2A/5V BEC output, dimensions of 51 x 36 x 36 mm and a weight of 80 g. Programming is possible via Program-Card 500906303. The motor uses a 4-pole layout, supports up to 12V, draws up to 66A with a minimum current of 3.2A, and measures 35.8 x 50 mm at 148 g. A 3.175 mm motor shaft with 15 mm shaft length and 4 mm gold connectors completes the hardware package for clean installation in compatible chassis. For running setups, 2S LiPo and 6-cell NiMH are specified for on-road and off-road use, while 3S LiPo and 9-cell NiMH are specified for on-road use only. Wet and damp conditions such as rain and puddles are supported, but the vehicle and components must not be submerged under water. The set includes the brushless motor, brushless controller and instructions.

RC brushed motors

540 80T-CB Truck Machine, electric motor

€13.49

Built for RC truck applications, the 540 80T-CB Truck Machine combines a brushed motor layout with 6500 rpm and 165 Nmm output for a drive character that favours controlled torque delivery over aggressive top-end running. The 4.8 to 8.4 V operating range gives the motor a clear place in many hobby-grade vehicle setups. Inside the can, the 80T configuration shapes the motor for measured response in pulling and load-focused use. Sintered self-lubricating bearings support the shaft and reduce service effort, which matters when a drivetrain sees repeated running sessions and regular workshop attention. The motor is also equipped as standard with a motor cable and anti-interference circuitry, so the electrical side is already prepared for integration into a compatible RC chassis. As a single electric motor component, it suits replacements, upgrades, or fresh builds where the drive system needs a defined brushed setup. In a scale truck project, this motor fits the kind of running that calls for steady launch behaviour, controlled throttle pickup, and dependable power transfer through the drivetrain. It also works well in bench-planned hobby builds where voltage range, winding type, and output figures are chosen with the rest of the transmission in mind.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Adapter Cable Mini Tamiya to Tamiya Charger

€3.99

Mini Tamiya battery packs remain common across RC and model setups, and this adapter cable connects them to chargers with a standard Tamiya plug. The short 2-wire lead combines one Mini Tamiya connector and one Tamiya connector, creating a direct link for charging without changing the existing battery pack connection. The cable is designed for batteries with Mini Tamiya plugs and for use with a standard plug charger or a charging device with Tamiya plug. Its compact format keeps the connection path simple, while the red and black wires provide an easy visual reference across the 2-pin layout. In model workshops, pit boxes and home charging stations, that clear connector-to-connector format helps keep charging equipment organised around established Tamiya plug standards. The small looped lead also takes up little space alongside battery packs, chargers and other RC accessories. With an age marking of 14 years, the adapter fits hobby-focused RC and model environments where battery and charger compatibility matters. It serves as a practical link between existing power components for routine charging before track, trail or bench sessions.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Adapter T-Plug to Tamiya female, adapter cable

€5.99

Different connector standards are a familiar part of RC building, and this adapter cable creates a direct link between a T-plug connection and a Tamiya female connector. The short lead combines 2-pin connectors with red and black wires, giving the setup a clear polarity layout for model and charging tasks. In model use, the adapter makes it possible to connect battery packs with a Tamiya connector system to models that use a T-plug actuator connection. The same cable can also be used between a charging lead with T-plug and battery packs with a Tamiya connector. That dual role adds practical value on the bench, especially where existing packs and charging equipment use different connector formats. As an accessory in the models and supplies category, it focuses on compatibility rather than added electronics or conversion modules. The compact format suits hobby spaces where several RC systems are kept ready for maintenance, battery changes or charging preparation. Age marking: 14 Years. Whether used as part of a running setup or as a charging bridge, the cable adds a simple connection path between 2 established plug types.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Antenna Tube Neon 4Pcs. Model Accessory

€3.29

Antenna Tube Neon 4Pcs. adds a bright finishing detail to RC model setups with 4 coloured antenna tubes designed for visible aerial routing. The set combines blue, green, yellow and black tubes, creating a clear marker above the bodyshell that helps the model remain easy to follow during running sessions. Each tube is shaped as a slim, flexible accessory part for fitting onto a model antenna, with matching black end pieces shown as part of the set. The colour mix supports quick visual differentiation between vehicles on a pit table, club track or storage shelf, while also serving as a straightforward replacement for worn antenna tubing. As a compact model accessory, the set suits routine maintenance, rebuilds and visual updates without changing the core vehicle layout. On home tracks, club circuits or display shelves, the coloured tubes add a sharper visual reference point above the body line. In workshop use, the 4-piece pack keeps spare antenna parts ready for repairs, fresh builds or colour-matched finishing touches across several RC models.

RC tires & rims

Buggy Tire/Wheel Set, RC accessory, 1:10

€22.49

A 1:10 buggy gains a clear off-road character with this tyre and wheel set, built around 4 mounted units in a 2+2 layout and finished with chrome-look rims. The combination of black all-terrain tyres and silver 5-spoke styling gives the running gear a purposeful buggy stance while keeping the scale fit aligned with 1:10 models. The tread uses pronounced knobby blocks rather than a smooth road pattern, making this set suited to loose and uneven ground where a buggy needs more mechanical bite. As a wheel and rim replacement set, it covers both practical maintenance and visual refresh work on compatible RC buggy platforms. The mounted format means the tyres and rims already come together as complete running units, so the focus stays on fitting the set to the vehicle. The black tyre finish and bright rim surface create strong contrast, which stands out on off-road bodies and race-inspired builds. In workshop use, the set suits routine wheel changes before dirt-track sessions, gravel running or general terrain driving. It also fits shelf-to-track projects where a buggy needs a fresh wheel setup that matches its off-road role and 1:10 scale proportions.

Li-ion batteries

Deutz Tractor Li-ion Battery Pack, RC accessory

€12.50

This 7.4 V Li-ion battery pack adds a compact power source for compatible RC applications and carries a 500 mAh capacity in a small-format pack with attached lead and plug. The JST-4 connection gives the pack a defined interface for matching electronics, making it suitable as a replacement battery or as an extra pack for longer workshop and driving rotation. The label states fast-charging capability with a maximum charging current of 1C, equal to 500 mA, so charger choice can be matched to the pack's specified limit. Product data marks the battery as a rechargeable accessory rather than a complete vehicle set, which makes the format and connector type the key buying details. The visible cable layout with red, blue and black wires leads into a black plug connector, and the pack is identified as a High Performance Li-ion Battery Pack on the label. Batteries are not included with the wider set context in the data, so this rechargeable unit serves as the battery itself. In practical RC use, a spare pack like this helps keep a compatible Deutz tractor setup ready for the next run while another pack is off the model. It also suits bench testing, maintenance sessions or replacing an older battery when the required specification is 7.4 V, 500 mAh and JST-4 connection.

RC tools

Double-Sided Tape, black, model accessory

€6.49

Double-sided tape in black brings a simple, workshop-ready fixing aid to model-building and hobby tasks. The adhesive coating on both sides allows parts to be attached between 2 surfaces, while the peel-off release liner keeps each strip ready for clean handling before placement. The strip format shown in the set supports neat use on small-scale projects where a compact contact layer is needed. It can serve as a mounting aid, a fixing layer or a cushioning interface, depending on the specific build task at hand. The black finish keeps the tape visually discreet on darker assemblies and accessories. In a hobby workspace, this kind of material is useful when positioning lightweight components, adding contact pads or preparing repair and fitting work without changing the visible shape of the assembly. Used alongside model supplies and workshop tools, the tape suits ongoing maintenance, detail work and general bench tasks. The 14 Years marking places it within the hobby and enthusiast segment, where precise accessory materials often support careful assembly, adjustment and finishing.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

ESC Viper Sub 10, speed controller, 6-12V

€49.99

Built for RC submarine setups, the Viper Sub 10 is a brushed speed controller that combines 6-12V operation with a 40A motor limit for DC brushed motors under load. The fully waterproof design suits running conditions where electronics work below the surface and around constant spray, wiring and propulsion demands. A one-touch setup routine calibrates the controller to the radio system through the onboard button and LED sequence, setting neutral, full forward and full reverse positions. The unit also adds programmable reverse functions for more precise control of manoeuvres in confined water spaces. A high-power 3A BEC provides regulated 5.0V output for additional onboard functions that need a stable supply, going beyond the standard Viper Marine specification mentioned in the data. Built-in failsafe, motor short circuit protection and thermal overload protection add concrete electronic safeguards during operation. In a scale submarine build, these features support steady throttle control during launch, submerged cruising and low-speed direction changes near obstacles or weed. The compact controller format with clearly marked battery and motor connections also fits the technical character of dedicated RC boat and submarine installations.

Chargers & charging cables

Expert Charger LiPo Compact, charger, 900mAh

€21.99

The Expert Charger LiPo Compact brings a focused charging setup to the workbench with support for lithium batteries, an XHP balancer plug-in system and automatic shutdown after the pack is full. Its compact housing, side ventilation slots and clearly marked CELL1, CELL2 and CELL3 indicators keep the charging function easy to read during hobby use. Designed for 2-3S lithium packs, the charger works with an input voltage range of 110-240V and reaches a maximum charging current of 0.9A with 10W maximum output power. The balancer function promotes gentle charging by tracking the cells through the XHP connection rather than treating the pack as a single undifferentiated unit. This makes it a practical match for model-building enthusiasts who run compatible battery-powered vehicles and want a straightforward charger for regular bench sessions. The included charger and instructions keep the contents clear and focused. On the hobby table, the compact format fits easily beside a vehicle, battery pack and tools without taking over the workspace. Between driving sessions, it covers the routine task of recharging compatible lithium packs with a simple mains-powered setup and a clear end point once charging is complete.  Warning! Not suitable for children under 14 years.

RC remote controls

FS Reflex Stick Multi Pro, RC radio, 14CH LCD

€159.99

The FS Reflex Stick Multi Pro LCD is a 14-channel 2.4 GHz RC radio system built for complex model setups that need more than basic steering and throttle control. With 2 control sticks, 4 pushbuttons, 4 ON/OFF/ON switches and 2 rotary potentiometers, it gives hobby users direct access to multiple functions on vehicles and vessels, from light and sound to winch, support legs, water pump and water monitor control. Its 15 model memories keep different configurations ready for repeated use across several RC builds. The blue backlit LCD supports menu-based setup and status checks, while the 2.4 GHz FHSS system provides stable signal handling in the 4.8 - 6 V operating range. Servo reverse and trim functions are available for channels, and steering setup can be refined further with Dual Rate for servo path limitation, EPA for servo travel limiting and EXP for response adjustment. The system is also fully compatible with TAMIYA MFC 01/03 and DMD units. A failsafe function adds a defined response if signal transmission is interrupted. Included are a 14-channel 2.4 GHz transmitter, a 14-channel 2.4 GHz receiver and a multilingual handbook. 4 AA batteries are required separately for the transmitter. The Graupner-J/R plug system supports integration into compatible RC electronics, making this radio a strong choice for multi-function trucks, working models and other feature-rich RC machines.

Light & sound

LED Light Set Drift, light set, RC accessory

€22.99

Drift cars stand out through attitude as much as speed, and this LED Light Set Drift adds that visual layer with a controller, 10 LEDs and 4 LED tubes arranged for a dedicated drift lighting layout. Front indicators, rear indicators, headlights, rear lights, brake lights and blue underbody lighting give the model a more defined presence once the wiring is installed. The lighting functions are split into specific positions rather than a generic glow. The set simulates left and right front turn signals with 3 mm LEDs and left and right rear turn signals with 3 mm LEDs, while 5 mm LEDs handle the headlight and rear light or brake light functions. Blue underbody lighting runs left, right, front and rear for a 4-way effect that suits sideways driving scenes and display setups between runs. The controller operates on 4-6 V DC with a maximum current draw of 210 mA. A FUTABA connector system is used, and the data states compatibility with TAMIYA models. The module measures 42 x 32 x 13 mm and weighs 44 g, which helps when planning placement inside an RC car shell. Demo mode activates when the transmitter is switched off and all LEDs flash until the RC connection is active again. The scope of delivery includes the LED controller, 10 LEDs and 4 LED tubes. The age marking is 14 years.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Nano City Replacement Battery, Li-Ion battery

€6.99

Compact RC models rely on a battery that matches both their format and their connector, and this Nano City replacement battery is built exactly for that role. The 3.7 V Li-Ion cell with 500 mAh capacity and 1.9 Wh provides a dedicated power source for selected Carson vehicles, with a JST plug and attached lead for the specified connection type. It is supplied as 1 replacement battery and is intended for compatible models named in the data: 500907681 1:50 Nano City Fire Truck 2.4GHz, 500907682 1:50 Nano City Crane Truck 2.4GHz, 500907683 1:50 Nano City Garbage Truck 2.4GHz, 500907684 1:50 Nano City Tipper Truck 2.4GHz, 500404317 1:32 VW Beetle Rally 2.4GHz RTR white, 500404318 1:32 Volkswagen Beetle 2.4GHz RTR red, and 500404312 1:64 Flixbus 2.4GHz 100% RTR. The Li-Ion format suits repeated charging cycles, making it a practical spare or replacement for regular use. The label states a maximum charging current of 500 mA. As a replacement part, this battery fits especially well in setups where the original power unit needs to be exchanged after frequent driving sessions or kept ready as a charged spare between runs. Age marking: 8 years.

RC remote controls

RC-Reflex Pro 3, electric set, 2.4 GHz RC

€124.99

The RC-Reflex Pro 3 Electric Set brings together the core electronics needed to equip ARR and assembly kit models for the track or the water. Built around a 2.4 GHz radio system, the set suits RC cars and boats and combines control hardware, charging equipment and NiMH power components in one coordinated package. The transmitter works with an operating voltage of 4.8 to 6 V and pairs with a 4-channel receiver. Two continuously controllable fully proportional channels handle steering and throttle inputs with direct response. Servo reverse is available on both channels, while trimming functions for accelerator and steering help align the model accurately. Dual rate on both channels limits servo travel when a calmer steering setup is needed. The integrated fail-safe adds a concrete control function for signal loss situations, and the plug system supports Futaba and Graupner-J/R connections. A charging socket with plus terminal inside is built into the system. Power supply is covered by a 7.2 V 3000 mAh NiMH driving battery with TAMIYA plug and 4 NiMH Mignon 1.2 V 2100 mAh transmitter batteries. The included 2-in-1 charger works from 100-240 V, 50-60 Hz AC and provides max. 2 A at 9 V on output 1 and max. 0.5 A at 6 V on output 2. With the CS-6 steering servo, receiver, charger and battery set included, this electric package fits hobby setups that need a complete radio and power foundation for Tamiya-compatible models. Age 14 Years  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel Pro 4, RC transmitter, 2.4 GHz

€69.99

The Reflex Wheel Pro 4 brings 2.4 GHz control, LCD setup access and a wheel-style layout into one radio system built for RC model use. With 4 channels, 2 included mini receivers and a transmitter operating voltage of 3.6-4.5 V, it covers steering, throttle and added switching functions in a compact setup for multiple vehicles. Channels 1 and 2 work as fully proportional controls, giving fine input over steering and throttle instead of fixed steps. Channel 3 can be programmed as a switch or button function for a servo, while channel 4 uses a 3-level switch for added onboard functions. Servo reverse for channels 1 and 2 changes direction of travel when a model layout requires it, and the receiver power supply range of 3.5-10 V supports installation in different RC configurations without a BEC. The ball-bearing control unit supports precise steering input, while trim, dual rate, expo and ABS functions allow response to be adjusted to the model and surface. The LCD screen and LED battery status display keep key settings and charge information visible during setup and running. A failsafe function adds a concrete control feature for signal loss situations, and 15-model memory stores settings for different vehicles. The Uni connector system for Futaba and Graupner-J/R broadens compatibility across existing RC equipment. 4 AA batteries are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel X1, RC transmitter, 2.4GHz 2-channel

€47.99

The Reflex Wheel X1 brings 2.4GHz radio control and a classic pistol-grip layout into one focused setup for RC driving. A side steering wheel, trigger throttle and 2 fully proportional channels give fine control over steering and speed, whether the model is lining up for a clean straight or working through tighter corners. At the technical level, the transmitter runs on 4.8 to 6V and pairs with a compact 4-channel mini-receiver measuring 36 x 25 x 15 mm. The receiver power supply supports up to 11V without a BEC, and the Uni connector system J/R broadens compatibility across common hobby installations. A charging socket with positive pole inside is built into the transmitter, and an LED battery status display keeps the power level visible during use. The set is also Tamiya kit compatible, which makes it a practical radio option for many workshop and upgrade projects. Included are a 2-channel 2.4GHz transmitter and a 4-channel 2.4GHz receiver. 14 years marks the recommended age. 4 AA batteries are required separately, so the radio can move straight into bench setup, model installation and the first tuning session once the power supply is in place.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Sirius Max 2 ESC, speed controller, digital setup

€54.99

The Sirius Max 2 ESC brings compact speed control and clear setup logic to electric RC vehicle builds. Its digital 1-touch calibration uses the SET button and red, green and blue LEDs to store neutral, full forward and full brake or reverse positions, creating a direct link between transmitter input and motor response. With an input range of 4.8 to 12.0 V, the controller works with 4 to 10 NiCd or NiMH cells and with 2S to 3S LiPo packs from 7.4 to 11.1 V. The integrated battery type selection switches between automatic NiCd or NiMH cutoff and automatic LiPo cutoff before power-up, and the blue LED stays lit in LiPo mode. A 2.0 kHz frequency and 1.5 A BEC current support the electrical layout, while the compact housing measures 40 x 36 x 12 mm and weighs 54 g including wires. Factory-fitted leads connect battery, motor, switch and receiver, with color coding shown as black for battery negative, red for battery positive, blue for motor negative and yellow for motor positive. In use, the controller suits hobby builds that need clear installation feedback and adaptable drive behavior. Failsafe mode signals with a flashing red LED and returns the controller to neutral when receiver signal is lost or incorrect, helping maintain controlled response during running sessions. Age 14 Years.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Viper Marine 25, speed controller, 6-12V ESC

€52.99

The Viper Marine 25 speed controller is designed for RC boat setups that need compact electronic control with marine-focused protection. Its 100% waterproof construction, 25 A current limit and input range of 6.0-12.0 V/DC give this ESC a clear place in electric model boating, where wet running conditions and dependable throttle response matter at the same time. A 1 kHz drive frequency shapes the motor control, while the onboard 1.5 A BEC supports the connected radio system from the controller itself. Forward and reverse are both available, and the reverse function can also be adjusted or disabled to suit the layout and handling style of the model. All adjustments run through a single set up button, keeping configuration direct on the bench before the hull goes back on the water. Integrated fail safe, motor short protection and overload protection add concrete electronic safeguards, and the included wires plus on-off switch support clean installation into the boat. In use, the controller suits electric marine models that need a compact ESC between battery, motor and radio gear. Whether fitted into a sport hull or a scale boat, the 6-12 V/DC operating range and marine-specific protection features support controlled running across repeated sessions on the water.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 All Terrain Wheel-Set, model wheels

€26.99

A 1:10 wheel set can change both the stance and the running character of a model, and this all terrain 2WD set brings that effect through 4 matching wheels with deep off-road tread and black rims. The combination suits replacement work on used running gear as well as fresh builds that need a complete rolling set in one pack. The tyres show a directional zigzag pattern with a wide profile that gives the contact surface a defined shape on mixed ground. The black rims use a multi-spoke layout with narrow rectangular openings around the outer ring, adding a technical look that fits many RC vehicle styles. A large centre hub opening is built into each wheel for mounting on compatible 2WD models. The set is supplied as 4 coordinated wheel units, which keeps tread pattern and rim style aligned across the chassis instead of mixing different wheel types. On a workshop bench, the set suits routine replacement after heavy running sessions or a visual update during a rebuild. Once mounted, the all terrain layout supports RC driving on loose and uneven surfaces where a more pronounced tread pattern is part of the setup. Age 14+

RC tires & rims

1:10 All Terrain Wheel-Set, wheels, 4WD

€26.99

A fresh wheel and tyre setup can change how a 1:10 off-road model meets the ground, and this 1:10 All Terrain 4WD Wheel-Set brings that focus to the running gear with 4 matching mounted units. Each wheel combines a black tyre with a white disc rim, creating a clean contrast that stands out on the bench and on the track while keeping the full set visually consistent across the vehicle. The tread uses deep block sections with directional-style grooves, a layout aimed at loose and mixed terrain where the contact patch needs defined edges to work into the surface. Because the tyres are already mounted on the rims, the set suits quick workshop swaps when an existing setup is worn or when a second tread option belongs in the pit box. The 4-piece format covers the full vehicle rather than a partial axle change, which keeps handling balance more even from front to rear. As an accessory in the Models & Accessories range, the set fits naturally into regular maintenance and setup planning for 4WD RC platforms. On gravel paths, packed dirt or changing off-road ground, a dedicated wheel set makes it easier to keep one configuration ready for the next run. The age marking is 14 Years, and the set works well as a practical spare or replacement for hobby sessions centered on tuning, upkeep and outdoor driving.

RC brushless motors

1:10 Dragster Turbo, brushless set, 3300KV

€69.99

Built for fast 1:10 RC setups, the Dragster Turbo brushless set pairs an 8T sensorless 3300KV motor with a 60A controller for strong launch force, high efficiency and the kind of top-end pace that suits both on-road and off-road driving. The combination is designed for 2S, 3S and NiMH 6 to 9 cell battery formats, opening up different power layouts within one drive package. The controller measures 51 x 36 x 36 mm, weighs 80 g and is specified for 60A continuous current with 360A peak current, a 2A/5V BEC and 0.0007 Ohm resistance. Programming is possible via Program-Card 500906303. The motor measures 35.8 x 50 mm, weighs 148 g and is rated at max. 350W with up to 17V, max. 47A and min. 2.6A. Its 4-pole layout, 4 mm gold connectors, 3.175 mm shaft diameter and 15 mm shaft length give model-building enthusiasts concrete data for matching the set to an existing chassis and drivetrain. Wet and damp running conditions such as rain and puddles are supported, but the vehicle and components must not be submerged under water. The set includes the brushless motor, brushless controller and instructions, making it a focused upgrade choice for hobbyists tuning acceleration, response and speed in electric RC cars.

RC tires & rims

1:10 Off-Road Cross Country, wheel set

€27.99

A fresh wheel and tyre setup can change both the stance and the running character of an RC build, and this 1:10 Off-Road Cross Country wheel set brings that change in a matched 4-piece format. The combination of off-road tyres and chrome-look rims gives 1:10 models a clear cross-country style while keeping the running gear consistent across all 4 corners. The tyre profile uses pronounced tread blocks that suit loose terrain and uneven ground, making the set a practical choice when a road-biased pattern no longer fits the route. The rim design adds circular cutouts and beadlock-style detailing for a more rugged visual finish. As a dedicated wheel set, it also works well for rebuilds, maintenance jobs or planned setup changes between different driving surfaces. The 1:10 scale format keeps the application focused on models in that class, which helps when preparing spare running gear for the workshop. Whether the goal is replacing worn wheels after repeated outdoor runs or preparing a second set for dirt tracks and rougher paths, this 4-wheel package adds a straightforward way to keep a model ready for the next session. Age 14 years+

RC tires & rims

1:10 Y-Design2 Wheel Set, RC wheels, gold chrome

€22.49

A 1:10 on-road chassis gains a sharper road look and a ready-to-run wheel package with the Y-Design2 wheel set in gold and chrome. The set includes 4 fully bonded wheels built for RC vehicles that use a 12 mm standard hex wheel hub, combining straightforward fitment with a striking multi-spoke finish. The tyre construction is tuned for paved running, with foam inserts working behind the road tread to support the casing as the car loads up through acceleration, braking and direction changes. That combination helps the tread hold its shape more consistently on the surface instead of feeling vague when conditions are less than favourable. The partly chrome-plated rim edge adds contrast to the gold centre, while the airy Y-design keeps the wheel face visually open and gives touring, street and drift-style bodies a more technical appearance. Age marking: 14 Years. Mounted on a road car shell, the set shifts the whole visual balance of the chassis, especially on race, tuner and performance-inspired builds. It also suits refresh work on a used runner where worn tyres or dated rims have taken the edge off the car's look and road manners.

LiPo batteries

3.7V 500mAh LiPo Battery, RC accessory pack

€12.99

This RC battery accessory is defined by clear core data: 3.7 V voltage, 500 mAh capacity and LiPo battery chemistry for compatible Yairo applications. As a spare or replacement battery, it gives hobby users a straightforward way to match an existing setup against the stated electrical values instead of relying on broad category labels. The compact specification makes this battery relevant wherever the original setup calls for the same 3.7 V and 500 mAh combination. LiPo chemistry is widely used in RC systems where low weight and compact dimensions matter, and the stated values provide the practical reference point for checking fit within a compatible vehicle or accessory platform. The product data identifies this battery under the Yairo designation and places it within electric and battery car sets and accessories, which helps position it clearly as a power component rather than a complete vehicle. In day-to-day hobby use, a matching spare battery can support planned replacement cycles or extend bench preparation between running sessions when a compatible setup is already in service. The age marking in the data is 14 Years.

Remote-controlled systems

Akuma Radio 2.4GHz, transmitter, 2-channel RC

€26.99

The Akuma Radio 2.4GHz transmitter brings classic pistol-grip RC control to compatible models with a compact hand-held layout, a side steering wheel and a trigger for throttle and brake input. Marked controls for REV, NOR, BIND, SET, CH2 and CH3 place the core functions directly on the housing, keeping the operating sequence clear during setup and driving. The transmitter is listed as a 2-channel unit in the product data, while the housing markings also show CH2 and CH3 functions alongside D/R ST, ST TRIM and TH TRIM controls. That layout gives model-building enthusiasts direct access to steering trim, throttle trim and steering dual-rate adjustment on the transmitter itself, so the response can be matched more closely to the connected RC model. The 2.4 GHz R/C system supports modern wireless operation without a trailing antenna arrangement, and the pistol-grip form keeps steering and speed control separated into distinct hand movements. Used with Akuma, Bokusa or Drakuro RA models, this transmitter suits driving sessions where clean steering inputs and quick throttle control matter. The recommended age is 14 years and up. Batteries are required separately.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

Akuma Receiver 2.4GHz, RC receiver, 3-channel

€23.49

This 2.4 GHz receiver module is built as a replacement part for compatible Akuma, Bokusa and Drakuro RC models, bringing the radio system back into the electronics layout with a compact housing, a long antenna wire and a 3-channel connection format. The marked ports for BAT, CH1, CH2 and CH3 give the installation a clear structure when the module is fitted into the chassis. As a dedicated receiver, this component is made for hobby-grade radio control setups where the signal path between transmitter and onboard electronics needs the correct matching part. The rectangular case keeps the unit easy to position among the existing electronics, while the plug-in connector block supports direct connection of the relevant control functions. The 2.4 GHz specification suits modern RC operation, and the 3-channel design leaves room for steering, throttle and one additional switched or controlled function, depending on the compatible model's layout. In workshop use, this receiver fits naturally into repair, maintenance or parts replacement when an existing model needs the correct control module again. It also suits enthusiasts keeping compatible Carson platforms running with the intended electronics configuration for driving sessions and technical upkeep.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Ansmann USB/USB-C Power Supply, charger, 45 W

€39.99

The Ansmann USB/USB-C Power Supply 45 W combines dual-port charging with a compact mains format for hobby gear and everyday electronics. With 1 USB-C socket and 1 USB-A socket on the housing, it connects both newer USB-C cables and established USB charging leads in one unit at the bench, in the workshop or on the road. Its technical setup is built around an input voltage of 110 - 240 V AC, a maximum input current of 1.0 A and mains frequency support for 50 Hz and 60 Hz. On the output side, the charger delivers 5 - 20 V DC with up to 3.0 A and a maximum output power of 45 W. That specification makes it suitable wherever compatible devices need a dependable wall power source, whether for charging handheld electronics or powering USB-based accessories between driving sessions. Integrated temperature monitoring adds another control layer during operation, complementing the electrical protection functions already built into the unit. The compact adapter format with EU plug pins keeps the setup straightforward on a wall socket or power strip, while the 14 Years age marking is stated in the product data. In a hobby room, travel bag or charging station, this 45 W power supply adds a clean, practical connection point for compatible USB and USB-C equipment.  Warning! Not suitable for children under 14 years.

RC tires & rims

Beach tyre set CV-10B, wheel set for 1:10 models

€33.99

Loose sand calls for a different contact patch than packed dirt, and this Beach tyre set brings that terrain focus to compatible 1:10 RC vehicles on the CV-10B chassis. The set contains 4 matching wheels with chrome rims and a 90 mm diameter, creating a consistent setup for replacement work or a dedicated sand-running configuration. The tread pattern is shaped for soft ground, where paddle-style lugs can dig in and support drive on surfaces that quickly overwhelm a road-biased tyre. The chrome wheel finish adds a bright visual contrast against the dark rubber and gives the running gear a more customised look. As a complete 4-piece set, the wheels can be fitted across the full vehicle rather than mixed with older tyres of a different wear level. The stated CV-10B fit keeps compatibility clear for builders working around that chassis platform. This wheel set suits maintenance sessions, seasonal terrain changes and fresh project builds that need a sand-ready setup kept separate from everyday running gear. It also works well as a spare set on the shelf, ready for the next outing on loose ground where tread choice matters most.

Model tools

Body Driller 1-17 mm, hobby tool, metal tip

€26.49

A body driller is a staple on the model bench when bodyshell work calls for clean, accurately placed openings. This Carson Modelsport tool uses a pointed conical metal tip that widens holes from 1 mm to 17 mm, making it suited to careful preparation of thin model body material for fittings and mounting points. The tapered working end supports gradual enlargement instead of jumping straight to one fixed diameter, which helps when a shell needs a precise opening matched to the part being installed. A knurled metal handle adds control in the hand and gives the grip needed for steady pressure during marking, starting and widening each hole. The protective cap covers the tip when the tool is stored, so the pointed end stays protected between bench sessions and while packed with other workshop gear. On RC and scale model projects, this kind of hand tool fits naturally into body preparation, finishing and adjustment work. It suits hobby tasks where a clean opening and controlled placement matter, whether a fresh bodyshell is being prepared or an existing shell needs a new mounting point. Age recommendation: 14 years and up.

Chargers & charging cables

Charger cable XT90, charging accessory

€6.59

The Charger cable XT90 adds a dedicated charging link to an RC setup, connecting charging equipment and a matching battery interface through a compact lead built for this specific task. In the product image, the cable is shown with 2 banana plug connectors on one side and a yellow connector housing on the other, creating a straightforward layout for polarity-based connection in the workshop. The red and black wire coding helps distinguish positive and negative lines during charging, while the paired banana plugs suit charger outputs that use this common connector format. As an accessory named for XT90 charging use, the cable is intended to extend an existing charging arrangement rather than replace the charger itself. The product data also names it as an accessory for the 500409073 1:8 Virus Rocket 120 6S 2.4G RTR, giving RC enthusiasts a concrete compatibility reference within the Carson range. On the bench, this kind of charging lead supports routine battery care between driving sessions and keeps the connection path focused on the required interfaces. The age marking in the data is 14 Years.

Chargers & charging cables

Charging Adapter TAMIYA Plug to T-Plug Cable

€5.79

Different connector standards often decide whether an RC setup can run at all, and this charging adapter cable bridges that gap by pairing a T-plug connector with a TAMIYA plug in one compact lead. The short cable format with red and black wires creates a straightforward link for model electronics where matching battery and vehicle connections matter. In use, the adapter allows battery packs with a T-plug connector system to be connected in models that use a TAMIYA actuator connection. That makes existing packs usable across more than one connector standard without changing the installed plug on the model side. The same cable also supports charging tasks by connecting a charging lead with TAMIYA plug to battery packs fitted with a T-plug connector. Heat-shrink insulation near the red plug adds a clean finish around the cable transition, while the 2 different connector ends make the function immediately clear during setup. On the workbench, in a pit box or alongside regular running gear, this cable serves as a practical link between battery, charger and model when plug systems do not match. The 14 years marking is stated for this accessory, fitting its use within hobby-grade model equipment and electrical setups.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Charging Cable T-Plug for RC Battery Charging

€8.99

Charging Cable T-Plug adds a direct link between charger hardware and compatible RC power components, with a black T-Plug connector on one end and 2 banana plugs on the other. The red and black lead layout keeps the polarity path easy to follow on the bench, while the compact cable format suits regular charging routines in model sports setups. The connector arrangement is geared to practical workshop use: the banana plugs slot into suitable charger or power supply terminals, and the T-Plug end connects to matching battery packs or electronics that use this format. The paired wire design keeps both lines together for tidy handling during charging preparation, storage, and transport with other RC accessories. As a models supplies accessory, the cable fits naturally into hobby equipment collections where connection standards matter as much as the charger itself. In use, the lead supports charging stations, maintenance benches, and general RC electronics handling where a T-Plug connection is required. The age marking is 14 Years, matching its place in hobby-oriented model accessories rather than entry-level play ranges.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Charging Cable Tamiya Gold, charger lead

€6.49

A straightforward charging link matters when battery care is part of the model routine. This charging cable combines a Tamiya-style 2-pin connector with 2 banana plugs, creating a clear connection path between compatible battery packs and charging equipment at the workbench. The red and black banana plugs provide visible polarity distinction during setup, and the insulated plug housings support controlled handling while connecting to charger terminals. As a dedicated charging lead, the cable is shaped around connector compatibility rather than extra functions, which keeps its role clear in model workshop use. The compact adapter format also fits neatly into existing charging gear without adding unnecessary bulk to the bench. In regular hobby use, the lead supports charging tasks for compatible model batteries and charger outputs that rely on these connector types. The 14 Years age marking places it within model-building and RC workshop environments where accessories are selected to match established battery and charger systems.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger LiPo 2,2A, charger, 25 W

€21.99

The Easy Charger LiPo 2,2A brings compact charging hardware and dedicated LiPo functions into one bench-ready unit for model-driving sessions. With 25 W maximum output power, 2.2 A maximum charging current and a Balancer XHP connector, it is configured for 1 x 2S and 1 x 3S LiPo packs named in the technical data. Its lithium storage function adds a separate operating mode beyond standard charging, making it useful when packs are not heading straight back into a vehicle after a run. Delta peak cutoff manages the charging endpoint as part of the charging process, while the AC 100-240 V input voltage gives the unit a broad mains range for home workshop use. The set includes the charger, a power cable and a manual. 14 Years marks the recommended age. Between maintenance at the workbench and preparation before the next outing, this charger fits neatly into the routine around RC battery care. It suits hobby setups that use compatible 2S or 3S LiPo packs and need a straightforward charger with clearly stated electrical data.

RC remote controls

FS Reflex Stick II, RC remote control, 6-channel

€109.99

The FS Reflex Stick II brings 2.4 GHz control and a classic dual-stick layout to RC vehicles and boats, with 6 channels operated independently through 2 joysticks, 1 ON/OFF/ON button and 1 ON/OFF/ON switch. Its FHSS system uses Frequency Hopping Spread Spectrum for radio transmission, while the included 6-channel receiver completes the core control package. The radio system runs at 6 V from 4 AA batteries and supplies the BEC receiver with 4.8 - 6 V. Servo reverse on 2.4 GHz changes the direction of assigned channels when a servo reacts opposite to the intended command, and the trim function helps dial in channel response with greater precision. A Graupner J/R plug system supports connection within compatible RC setups. The integrated charging socket adds a direct charging connection within the system. Full compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units makes the set a strong match for expanded truck and function-model installations. On the bench, the 6-channel layout supports coordinated setup of steering, throttle and auxiliary functions before the first run. At the lake or on the track, the dual-stick format and extra switching inputs suit models that need more than basic steering and speed control. 4 AA batteries are required separately.

RC remote controls

FS Reflex Stick Pro 3.1, RC transmitter, 2.4 GHz

€49.99

The FS Reflex Stick Pro 3.1 brings classic stick-transmitter handling to 2.4 GHz RC control, pairing 2 fully proportional channels with gradual response for measured steering and throttle inputs. With its 4.8-6 V operating voltage from 4 AA batteries, the radio system is set up for hobby use where clear control and direct adjustment matter at the bench and on the track. Channel 1 features dual rate to limit servo travel when a model needs a narrower steering range, while channels 1-2 add trim and servo reverse for matching direction and neutral position to the installed setup. The included 4-channel receiver expands the system beyond the transmitter name alone and connects through the Futaba/Graupner J/R plug system. A fail-safe function adds a concrete control safeguard if signal transmission is interrupted, and the LED battery status display shows the transmitter power state at a glance. The charging socket with positive pole inside adds a dedicated connection point to the radio unit itself. In use, the layout suits model-building enthusiasts who prefer stick control for boats, vehicles or other compatible RC builds with 2-channel operation. The combination of receiver, adjustment functions and 2.4 GHz radio link supports setup work, fine correction and regular driving sessions without turning the transmitter into a one-setting system.

RC remote controls

FS Reflex X1, 2.4 GHz radio system, 2-channel

€46.99

The FS Reflex X1 brings classic wheel-style RC control to cars and kits that need precise 2.4 GHz radio handling. Its 2 fully proportional channels work through a side steering wheel and trigger layout, so steering and throttle inputs can be adjusted smoothly across the full control range instead of switching between fixed positions. At the transmitter, servo reverse is available on both channels to invert steering or throttle direction when a model setup requires it. Separate trim functions for steering and throttle help correct the neutral position, and dual rate for both channels limits servo travel for a more measured response. The transmitter operates on 4.8 to 6 V and includes a charging socket with the positive pole inside. An LED battery display shows the transmitter status at a glance during use. The included 4-channel mini receiver measures 36 x 25 x 15 mm, uses the J/R Uni connector system, and supports receiver power up to 11 V without a BEC. This radio system suits Tamiya kit compatible setups and other RC vehicle builds that need compact receiver dimensions and adjustable control behaviour. A 2-channel 2.4 GHz transmitter, a 4-channel 2.4 GHz receiver and a handbook are included. 4 AA batteries are required separately.

RC combustion engines & glow plugs

Glow Plug Rossi R5, model engine spare part

€10.99

Glow-powered model engines rely on a precisely matched ignition component, and the Rossi R5 is built for that role as a dedicated glow plug spare part. The visible R5 designation and very cold heat range point to use in tuned combustion-engine setups where engine temperature, fuel choice and running conditions call for a colder plug characteristic. The metal glow plug uses a threaded body for fitting into the engine head, and the separate copper washer sits beneath the plug at the seat. That combination gives the engine the installed contact point and the sealing ring required for correct fitment at this specific location. As a compact replacement part, it belongs in the maintenance cycle of glow-fuel RC vehicles and other model-engine applications that use this type of ignition system. The rounded contact tip and threaded section identify it clearly as an engine component rather than a general workshop accessory. In practical use, the Rossi R5 suits bench servicing, routine replacement after engine wear, or tuning changes within a glow-engine setup. The 14 years age marking is stated for this spare part category, and the compact format makes it easy to keep alongside other workshop essentials for model-engine running sessions.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow Plug Rossi R6, engine part, cold plug

€13.99

The glow engine remains a defining part of nitro RC driving, and the Rossi R6 brings that workshop detail down to one compact engine component. This cold-rated glow plug uses a threaded metal body, a contact tip for the glow igniter and a separate copper sealing washer for installation in the engine head. As a replacement part, the R6 supports the ignition process in model combustion engines by heating at the plug tip during starting. The copper washer sits beneath the plug to seal the seating surface at the cylinder head. Its compact format makes it easy to keep as a spare in a pit box alongside other engine service parts. The clearly designated R6 version also helps hobbyists match the required plug type during routine maintenance, engine refreshes or tuning-related replacement. In practical use, this kind of engine part belongs in the regular service cycle of nitro-powered RC models, whether the session involves track running, test starts after storage or preparation before the next fuel fill. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow Plug Rossi R7, glow plug, cold range

€14.49

The Glow Plug Rossi R7 brings a core engine service part into model workshop routines with a cold heat range specification and a compact threaded format made for model combustion engines. The metal plug body, hex section and top contact point give this spare part the exact functional shape needed for installation and ignition within a nitro engine setup. During maintenance, the threaded section seats the plug in the engine head while the copper sealing washer closes the joint at the mounting point. This combination supports a clean replacement process when an existing plug is worn or when engine tuning calls for the R7 cold specification. The separate washer is part of the fitted assembly and belongs directly to the plug's sealing function rather than to packaging or storage. The clearly defined component format also makes it easy to identify within a spares box for regular workshop use. In RC and model engine care, a replacement glow plug belongs among the small parts that keep running sessions on schedule. The Rossi R7 suits bench servicing, trackside maintenance and planned engine refresh work where the required cold range is already part of the setup. Age marking: 14 years.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Gold Plug 4mm Set, connector set for RC models

€4.69

Gold Plug 4mm Set brings a classic connector format to RC and model electronics with gold-plated contact parts and colour-coded heat-shrink tubes for clean cable finishing. The 4 mm size suits hobby wiring jobs where a compact plug connection and clear polarity marking matter on the bench and in running setups. The set shown includes male and female connector elements together with red and black sleeves, so matched leads can be prepared with insulated ends and easy visual distinction between positive and negative lines. Gold-plated contact surfaces are widely used for soldered power connections because they support reliable electrical contact across repeated plug-in use. The separate metal sleeves and shrink tubes also allow a neat build sequence: solder the lead, fit the insulation, then finish the connection with clear colour coding around the joint. On RC cars, boats or other model electronics projects, this connector set fits naturally into custom wiring tasks, battery lead repairs or workshop stock for fresh cable builds. The compact parts and bench-style handling make it a practical addition for hobbyists who assemble, maintain and adapt their own electrical setups.  Warning! Not suitable for children under 14 years.

RC brushed motors

Launcher 2.0 Race 12T Motor, RC motor

€25.99

The Launcher 2.0 Race 12T Motor brings high-revving brushed drive power into RC racing builds with 32,500 rpm at 7.2 V and a short-time output of about 160 watts. Its black cylindrical housing, visible brush assembly and pre-fitted red and black wires underline the focused layout of a motor built for direct installation in compatible model drivetrains. With dimensions of 35 x 70 mm, the motor fits a compact performance format that suits many hobby workshop setups where space and component matching matter. The 3.175 mm shaft forms the mechanical connection point for the pinion gear, so rotational force passes straight into the transmission once installed. A weight of 164 g gives a clear planning value when balancing drivetrain components and overall vehicle setup. The brushed construction also makes the motor a relevant choice for enthusiasts working with classic race-oriented electric systems. In running sessions, the fast-revving character suits track-focused RC models that rely on crisp response and strong pull out of corners. The technical figures also make the motor a useful option for rebuilds, replacements or performance-led tuning projects where exact dimensions, shaft size and voltage reference need to match the existing setup.

Light & sound

LED Light Set Race, light set, 1:10 RC accessory

€22.49

The LED Light Set Race brings race-style lighting functions to 1:10 RC model cars with a compact controller and 12 connected LEDs. Front indicators, rear indicators, headlights and rear or brake lights are assigned to dedicated positions, so the body gains a more realistic light pattern when the model is wired into the vehicle electronics. The module runs on 4-6 V DC with a maximum current of 210 mA and uses a FUTABA plug system that works with TAMIYA models. The controller measures 42 x 32 x 13 mm and weighs 44 g, which helps when fitting electronics into tighter touring car or race body shells. The wiring layout links the light module with receiver channels CH1 and CH2 as well as the steering servo and speed controller, so the lighting responds within the model's existing control setup. A cable set is included alongside the LED control module and instructions. When the transmitter is switched off, the integrated demo mode activates and all LEDs flash, making the full setup visible on the bench or during display pauses between runs. Age 14 years. The set is intended for hobby use in model cars and adds a technical finishing touch to race builds, body conversions and detailed RC workshop projects.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Mini Tamiya Plug Socket Kit, connector set

€4.49

Mini Tamiya plug and socket kit brings a compact 2-pin connector format to RC and model electronics work, with 2 Mini Tamiya plugs, 2 Mini Tamiya sockets and contacts supplied as one set. The white connector housings and separate metal terminals suit wiring tasks where a detachable link between two cable runs is needed. Each housing uses a 2-pole layout, creating a clear plug-and-socket connection for low-voltage applications in model setups. The contacts are handled as separate parts, then crimped to the wire and inserted into the shells to complete the connection. That assembly step makes the set useful for repairs, replacement leads or custom cable preparation where an existing connector needs to be renewed. The compact format also suits installations where connector space is limited and a defined mating shape matters. In workshop use, the set can be kept on hand for RC maintenance, battery lead work or general model electronics tasks that call for a matching connector pair. Ages 14 years and up are stated for the set, fitting the small-part handling and wiring focus of this accessory.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

MR-8 2.4GHz MX-F RX, receiver, 8-channel

€49.99

The MR-8 2.4GHz MX-F RX brings multi-channel control into RC builds that need more than a basic steering and throttle layout. Its 8-channel format, marked A through H, opens room for servos and additional switched or proportional functions, while the separate BAT. connection gives the power input its own clearly identified position. The black receiver housing keeps the connector side easy to read during installation, with each channel printed directly on the case beside the pin rows. Visible gold contacts support clean plug-in wiring, and the compact module format suits model layouts where electronics need to stay organised. A recessed SET UP point is integrated into the case for binding or configuration access without adding external parts to the housing. The designation KO Receiver 8Ch MR-8 MX-F RX and the 2.4GHz specification place this unit in the radio electronics side of the hobby, where dependable channel assignment and neat cable routing matter as much as the drive system itself. In workshop use, the labelled port layout helps when assigning steering, speed control and extra functions across larger RC configurations. For 14 Years and up, the receiver fits enthusiast projects where installation, setup and system matching are part of the hands-on model-building process.  Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Start Electric Set, RC set, 1:10

€69.99

Built for 1:10 TAMIYA RC kits, the RC-Reflex Start Electric Set brings the key electronics for vehicle operation into one coordinated package. The set combines a compact 3-channel 2.4 GHz transmitter with matching receiver, a CS-3 steering servo, a 7.2 V 2500 mAh NiMH driving battery, a USB charger and 4 x AAA transmitter batteries, creating a clear starting point for hobby builds that still leaves room for precise setup work. The pistol-grip transmitter uses a wheel-style steering control and trigger throttle layout that suits RC car handling, while 2 fully proportional channels respond gradually rather than in fixed steps. Trim functions for accelerator and steering help correct running behaviour, and the servo reverse function allows the steering direction to be switched when the installation calls for it. A fail safe system adds a concrete control safeguard, and an LED battery status display keeps the charge state visible during operation. The included 3-channel receiver provides the matching vehicle-side link for the 2.4 GHz system. For workshop bench setup, club track preparation or the first runs after a fresh kit build, the set covers the central radio and power components in one box. The 14 Years marking fits the hobby-oriented character of the set, especially where model builders want a straightforward electronics package for getting a 1:10 chassis ready for driving.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Stick Multi Pro, RC radio system, 14-channel

€129.99

The Reflex Stick Multi Pro brings 14-channel control to demanding RC setups with an interference-free 2.4 GHz FHSS radio system and a layout built for models that need more than basic steering and throttle. In model trucks, boats or construction machines, the combination of 4 proportional channels and 10 switching channels supports detailed command over driving and auxiliary functions from one handset. The transmitter operates on 4.8-6 V from 4 AA batteries, and the receiver uses a 4.8-6 V power supply. Trim is handled by sliders, which supports compatibility with TAMIYA MFC 01, 02 and 03 units as well as the DMD unit. The Graupner J/R plug system supports straightforward receiver connection within many hobby-grade installations. A charging socket with positive pole inside is built into the transmitter, and the LED battery status display keeps the power level visible during running sessions. This RC radio system suits multi-function models where separate switching and proportional control need to work side by side, such as scale trucks with light and sound modules or boats with added onboard functions. The included 14-channel receiver completes the core radio set, while 4 AA batteries are required separately.

RC combustion engines & glow plugs

Rossi 4-Stroke Glow Plug for Model Engines

€13.99

The Rossi 4-Stroke glow plug is a dedicated replacement part for model engine setups that use a 4-stroke configuration. Its clearly named application keeps workshop selection straightforward when a compatible engine needs a fresh ignition component for maintenance, servicing or planned spares. Within model supplies, a glow plug is one of the small but essential engine parts that belongs in a well-prepared RC tool kit. This version is identified specifically as a Rossi 4-Stroke type, which helps separate it from other plug variants intended for different heat ranges or engine layouts. The compact threaded metal component is easy to store alongside other workshop essentials and suits hobby benches, pit boxes and field repair kits where quick access to the correct spare matters. The product data places it in Models & Accessories and Models Supplies, aligning it with ongoing engine care rather than a one-time build step. The stated age marking is 14 Years. That fits the hands-on context of model engine maintenance, where replacement parts, tuning work and regular servicing are part of the hobby routine around RC models and their running gear.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Rossi R8 Glow Plug, engine accessory, extra cold

€16.49

High-compression nitro engines place heavy demands on ignition parts, and the Rossi R8 glow plug is specified for exactly that kind of setup. This extra cold glow plug is designed for high-performance motors and for fuel with more than 22% nitro, giving hobbyists a clearly defined heat range for engines that run under demanding conditions. The glow plug uses a high-quality platinum coil, a key component in the ignition process inside a model engine. Its threaded metal body fits as a service and tuning part, while the separate copper washer supports a sealed installation at the cylinder head. Rather than acting as a general-purpose spare, the R8 is aimed at setups where compression, fuel blend and plug temperature need to work together. That makes it a useful choice for planned maintenance, engine refreshes and heat-range changes within a nitro tuning routine. On the bench, the Rossi R8 suits replacement work on RC model engines that need an extra cold specification. In running setups built around high nitro content, it gives enthusiasts a dedicated plug option for keeping the ignition system matched to the engine's demands.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

T-Plug plug kits, connector set, 3 pairs

€8.99

T-Plug plug kits bring a compact high-current connector format to RC and model wiring, with 3 pairs supplied for fresh builds, repairs, or replacement work. The black connector housings use a 2-pin layout with gold-coloured contacts, creating a clear connection point for power leads in hobby electronics. Each pair is designed for soldered cable installation and is accompanied by shrinking tube pieces that cover the finished wire ends after assembly. Reverse polarity protection is integrated into the connector shape, so the plug orientation is defined by the housing itself rather than by loose marking alone. That makes the set useful wherever battery leads, ESC wiring, or general power connections need a matched plug and socket format. The compact form also suits model layouts where cable routing space is limited. On the workbench, the set supports routine maintenance as well as custom wiring jobs across RC vehicles and other model applications. With 3 pairs in one pack, several circuits can be equipped in the same standard, or spare connectors can be kept ready for later service work. Age 14 years.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

tio Marine 15, speed controller, brushed 6-12V

€41.99

The tio Marine 15 brushed speed controller is built for RC boat installations that need compact motor control, waterproof construction and support for 6-12V operation. Designed for brushed DC motors up to a 15A load, it brings measured throttle response to marine setups where steady low-speed input and clean reversing behaviour matter on the water. Its control system uses 4-quadrant operation, so the motor stops fully before changing direction. That sequence creates balanced response around the neutral point and supports careful handling during docking, tight turns or slow approach work. The controller is programmable through the set button, with reverse selectable as on or off to suit either forward and reverse running or forward-only use. Battery compatibility covers LiPo as well as NiCAD, NiMH and lead acid packs, giving broad scope for different boat electrics. LED indications support setup and status checks, including calibration, battery mode and failsafe status. In a typical installation, the controller links battery, receiver and motor through clearly assigned positive and negative leads, making it a focused choice for brushed marine drive systems. Built-in failsafe returns the controller to neutral on signal loss, while motor short circuit protection and thermal overload protection support reliable running when load conditions become demanding.

RC electric motors & controllers

tio Storm X NoLimit speed controller, ESC

€58.99

The tio Storm X NoLimit speed controller brings compact RC power management into a 40 x 35 x 12 mm format with a weight of 55 g including cable. Its waterproof design, integrated fail safe and built-in protection functions make it a focused electronics upgrade for model layouts that need dependable throttle control, braking and reverse handling. Calibration works through a single setup button and an LED-guided sequence rather than a bank of separate adjustments. The controller supports forward, brake and reverse, with reverse able to be switched off when a brake-only setup suits the model better. NiMH and LiPo battery types are supported across 4 to 8 cells and 4.8 to 9.6 V, while the 3.3 kHz drive frequency and 1.5 A BEC round out the technical package. Short-circuit protection and overload protection are built in, and the unit comes complete with wires plus an on off switch. In an RC car or similar electric model, the small footprint leaves more freedom when placing the electronics around the receiver, battery pack and motor. The neutral return in failsafe mode and the option to disable reverse give hobbyists clear control over how the model responds on the bench and out on the track.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Viper Auto Sport 20, speed controller, waterproof

€41.99

The Viper Auto Sport 20 speed controller brings waterproof electronic motor control to brushed RC model setups in a compact 40 x 35 x 12 mm format. With forward, reverse and brake functions, it gives the drivetrain clear throttle response while the 54 g weight with cable keeps the unit easy to place in tighter chassis layouts. Programming is handled through 1 setup button, so the controller can be configured without a complex menu structure. The stated 20 Turn motor limit defines its intended brushed motor range, and NiMH compatibility with 4 to 8 cells at 4.8 to 9.6 V covers common hobby configurations. An integrated fail safe is built in as a concrete control feature, and the electronics also include short-circuit protection, overload protection, an on off switch and complete wiring. The listed 3.3 k frequency and 1.5 A BEC output add further technical detail for model builders comparing drive components. In a touring car, buggy or other electric RC vehicle, the compact case and attached leads support tidy routing between battery, motor and receiver. Wet track sessions, club running and general hobby use all benefit from a controller that combines waterproof construction, direct setup and clearly stated electrical limits.

RC electric motors & controllers

Viper Truck Twin 27T/15T, speed controller

€62.99

The Viper Truck Twin 27T/15T speed controller brings compact brushed-motor control to electric RC models with a 40 x 35 x 12 mm housing and a weight of 53 g including cable. Its waterproof construction and integrated wiring suit installations where space is limited and the electronics need a clean, self-contained layout inside the chassis. The controller is designed for NiMH battery packs with 5 to 10 cells and an input range of 6 to 12 V. A 15 Turn motor limit defines the drive range for compatible brushed setups, while a 3.0 A BEC supports receiver power supply. The operating sequence covers forward, brake and reverse, and the reverse function can be switched off when a model is set up for running without it. Setup is handled through a single button on the ESC, keeping the programming process focused on the controller itself rather than a separate programming unit. In use, the Viper Truck Twin 27T/15T fits RC truck and car builds that need compact dimensions, direct setup access and clearly defined drive functions. Complete wiring and an on-off switch support straightforward integration into a model, whether the controller is being installed in a fresh build or replacing an existing ESC in an established chassis.  Warning! Not suitable for children under 14 years.

Li-ion batteries

WaveRacer Jet replacement battery, 7.4V Li-Ion

€19.99

The WaveRacer Jet replacement battery is built around a clear electrical specification: 7.4 V, 2000 mAh and Li-Ion cell chemistry. That combination gives model hobbyists a defined spare power pack for the named WaveRacer Jet setup, with the key figures stated plainly for matching and replacement. As a replacement battery rather than a general accessory bundle, its role is practical and specific. The 7.4 V rating identifies the voltage class, while the 2000 mAh capacity marks the pack's stored energy level for the intended application. Li-Ion chemistry adds another concrete point for hobbyists comparing battery types within an RC fleet or checking an existing setup before ordering a spare. The product data names the WaveRacer Jet directly, so the battery can be described as a dedicated replacement option for that model designation rather than a broad, undefined universal pack. In day-to-day hobby use, a spare battery like this supports quick replacement of an exhausted or ageing pack and helps keep a compatible power source on hand for the matching RC watercraft. It also serves as a clear-spec backup when an original battery needs to be exchanged after repeated running sessions. Batteries are not included.

RC brushless motors

1:10 BL Motor Dragster Turbo 2.0, RC motor

soon available again

The 1:10 BL Motor Dragster Turbo 2.0 2000KV is an electric RC motor created for model-building enthusiasts working on a focused dragster-style setup. Its 2000KV rating gives the drive system a clearly defined basis for matching motor characteristics to the intended vehicle configuration and running style. As a brushless motor, it belongs in hobby projects where drivetrain choice shapes how the model responds under power. The 1:10 format keeps the motor aligned with a widely used RC vehicle scale, making it relevant for replacement work, planned upgrades or a fresh build around compatible components. The designation Dragster Turbo 2.0 places the motor within a performance-oriented setup, while the electric vehicle category points to battery-powered RC use rather than fuel operation. Minimum age 14 Years is stated for this motor. Battery is not included. On the workbench, this motor suits projects where the drive package is selected component by component and the KV figure matters in the overall setup plan. It also fits rebuilds where an existing RC vehicle needs a fresh motor matched to the rest of the electronics.  Warning! Not suitable for children under 14 years.

LiPo batteries

3,7V/300mAh Lipo Akku: 500505038

soon available again

LiPo batteries

3.7V 500mAh LiPo Battery, spare battery, JST

soon available again

This 3.7 V LiPo spare battery brings the specified power format for the 500108052 RC Jetski into one compact replacement unit. With 500 mAh capacity, a JST plug connection and a flat rechargeable cell layout, it is built to match the stated model and restore the required onboard power setup for RC running sessions on the water. The battery is supplied as 1 spare battery and is intended as a replacement rather than a universal pack. The product data states a 3.7 V rating, 500 mAh capacity and LiPo chemistry, which are the key figures to match when an existing battery needs to be exchanged for the same format. The visible battery marking also shows 1.9 Wh, adding another concrete reference point for the cell specification. A wired lead with plug connection links the battery to the compatible model, and the compact pouch-cell construction keeps the pack suited to smaller RC layouts where space and connector fit matter. For model-building enthusiasts and RC users, a correctly matched replacement battery helps keep a compatible watercraft ready for the next outing without changing the original power concept. Used with an appropriate charger, this spare pack supports the continued use of the 500108052 RC Jetski with the connector type and electrical values stated for that model.  Warning! Not suitable for children under 14 years.

RC brushed motors

550 Brushed Motor, XS-Chassis spare motor

soon available again

The 550 brushed motor brings a direct replacement drive unit to the Carson XS-Chassis 1:10 range, with a can-style DC layout, output shaft and top electrical terminals that suit classic hobby vehicle drivetrain setups. Built as a cable-free spare motor, it leaves the connection points open for the required installation work on the matching chassis. Compatibility is stated for Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. That covers Stadium Fighter in blue and orange, Offroad Fighter Cage in turquoise and red, Tekuro in grey green and grey blue, plus Ryken in blue and green. The 550 size makes this motor a defined replacement choice when an existing drive unit needs to be exchanged within that platform. The brushed setup also suits hobbyists who prefer straightforward maintenance on established RC vehicle systems. In workshop use, this spare motor fits naturally into repair, refresh and running maintenance on compatible 1:10 Carson vehicles. It supports drivetrain restoration after wear, or a like-for-like motor swap when one of the listed XS-Chassis models needs a fresh drive unit.  Warning! Not suitable for children under 14 years.

Li-ion batteries

7.4V 1200mAh Li-Ion Battery, RC accessory

available from November

This 7.4 V Li-Ion battery with 1200 mAh is the specified power pack for the Rock Rider, bringing a concrete replacement option into the RC setup and putting the key electrical data in clear view from the first glance. In the workshop or at the track bag, the compact battery format speaks directly to hobbyists who search by voltage, capacity and model reference rather than broad accessory labels. The data names this version as a Li-Ion battery and links it to the Rock Rider, which makes it useful both as a direct replacement and as a spare kept ready between running sessions. The 7.4 V rating defines the battery class within the setup, while the 1200 mAh capacity gives a clear reference point when matching an existing power system. Because the listing identifies a battery rather than a full vehicle set, the copy stays focused on the power component itself and avoids unsupported claims about included charging hardware or extra electronics. The age marking is 14 years, stated exactly as given in the data. As part of an RC equipment lineup, this battery suits bench preparation, replacement planning and keeping a compatible model ready for the next outing. The named Rock Rider reference helps separate it from generic packs when checking an existing setup or selecting a like-for-like spare.

RC carrying bags

Transport Bag Blue, RC bag, 55 x 30 x 25 cm

soon available again

A transport bag with 55 x 30 x 25 cm dimensions brings practical storage to RC sessions, club evenings and home organisation. The blue bag is sized for standard 1:10 RC cars and creates a tidy way to move a model together with the equipment that belongs with it, instead of splitting everything across separate cases. The nylon fabric is described as hard-wearing and keeps its shape, so the bag stays structured rather than slumping when it is only partly filled. That makes the opening easier to access when packing a chassis after a run or setting out tools before maintenance. Reinforced seams add support where the load pulls most, which matters when heavier RC gear is carried regularly. The format also suits dust-protected storage between driving sessions, with enough room to keep commonly used track equipment close to the model instead of stored separately. Carson blue and the printed Tamiya and Carson logos give the bag a clear workshop character that fits naturally into model-building and RC environments. Whether it travels to the race track, goes along to a model club meeting or stays on a shelf in the hobby room, the bag keeps RC equipment grouped, easier to handle and ready for the next outing.

RC tires & rims

Virus 4.0 6S Wheelset, model accessory

soon available again

Fresh running gear can change how a model looks and feels on the ground, and this 2-piece wheelset is made for the Virus 4.0 6S and Specter 6S. The pair combines black rubber tyres with silver-look rims, giving these Carson Modelsport vehicles a replacement set that matches their off-road character. The tread pattern is cut deep across the tyre surface, which helps the wheels bite into loose terrain instead of relying on a smooth contact patch. Each wheel uses a central hub opening for axle mounting, so the set serves as a practical spare when the original parts are worn, damaged or no longer match the rest of the running gear. The matching rim design keeps both sides visually aligned, which matters on models where wheel appearance is part of the overall build. As a dedicated wheelset rather than a mixed assortment of parts, the pair is straightforward to keep in the workshop as a ready replacement. In use, the set suits routine maintenance after hard bashing sessions, a visual refresh before the next run, or a direct swap when a damaged wheel interrupts driving. For model-building enthusiasts, spare wheels like these are a useful part of keeping a Virus 4.0 6S or Specter 6S prepared for regular off-road action.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 BigWheel-Set 02, wheel set, on-road

soon available again

The 1:10 BigWheel-Set 02 brings a bold on-road wheel package to RC car builds, combining 10-spoke rims in black and chrome with low-profile tyres for a sharp tuning look. The 4-piece set gives 1:10 models a matched wheel layout that changes the stance and visual character in one swap. Each wheel arrives as a mounted unit, so the set focuses on the finished combination of rim and tyre rather than separate parts. The black centre and chrome outer section create a strong contrast that suits touring-style bodies, street conversions and other road-focused shells. The spoke layout keeps the design clean and technical, while the low tyre sidewall reinforces the custom on-road appearance. Directional groove detailing across the tread adds another layer of visual definition and gives the set a purposeful motorsport style. On display shelves, workshop benches or active RC projects, the wheel set adds a clear styling change without altering the overall 1:10 format. Age marking: 14 years and up.

RC tires & rims

1:8 Tires Set On-Road 4S, wheel set

soon available again

This 1:8 wheel set brings together 2 black on-road tyres and rims in a glued, ready-mounted format for RC model use. With a 100 mm overall diameter, 43 mm width and a 17 mm rim driver, the set gives model-building enthusiasts concrete fit data for matching an existing chassis and hub setup before installation. The on-road tyre type suits paved running surfaces and street-style RC setups where a low-profile road pattern is required. The mounted construction means tyre and rim arrive already paired, avoiding separate gluing work and keeping both wheels consistent in size and type. The black finish and multi-spoke rim look shown by the set support a clean competition-inspired appearance on 1:8 models. Age marking: 14 Years. As a replacement set, the 2-piece format fits routine maintenance, a worn rear or front axle refresh, or a visual update on an RC car already built around 17 mm wheel mounting. The dimensions make it easier to compare existing running gear directly when planning the next track-day or car park session.

RC combustion engines & glow plugs

Glow Plug Rossi R2, engine part, hot insert

soon available again

The glow plug is one of the key working parts in a glow fuel model engine, and the Rossi R2 is specified here as a hot-rated version for model combustion setups. Its compact threaded metal form and rounded contact tip are made for fitting into the engine head, where this small component supports the ignition process during running. Alongside the plug, the set includes a copper sealing washer for the matching installation point. That gives the replacement part and its sealing component in one pack, which is useful when an existing plug has reached the end of its service life or when a fresh spare belongs in the pit box. The clearly stated R2 hot designation helps distinguish this version from other plug types when matching parts for maintenance. 14 Years is the stated age marking. In workshop use, this engine part fits naturally into regular servicing for RC combustion models, whether the task is replacing a worn insert, preparing spares before a running session, or keeping maintenance supplies organised with other engine hardware. The small format also makes it easy to store alongside other model engine essentials.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow Plug Rossi R4, engine part, cold grade

soon available again

The Rossi R4 glow plug is a cold-grade engine part made for nitro model engine setups that depend on the right heat range at the cylinder head. Its compact metal construction combines a threaded shaft, a hex body for tightening and a contact tip at the top, creating the functional layout used for installation and engine operation. A copper sealing washer is included and sits between the plug and the engine head to help create the intended seal at the mounting point. The visible thread and hex profile make the part straightforward to position with the correct tool, while the single-plug format suits maintenance, replacement and tuning work on compatible engines. As a dedicated engine component rather than a general accessory, the Rossi R4 belongs in the workshop kit for glow-powered model running where the specified cold rating is required. On the bench, this part fits naturally into routine service before the next driving session or as a direct replacement when an engine needs a fresh plug. The 14 Years age marking is stated in the supplied data for this hobby accessory, placing it in the enthusiast end of model engine maintenance rather than general toy use.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

USB-Charger 7.4V, charger, XHP plug

soon available again

This USB charger is built for 7.4 V Li-Ion and LiPo battery packs with an XHP plug, combining a compact cable format with clearly stated charging data for RC use. The inline unit takes DC 5 V / 2 A through a standard USB-A connection and delivers 7.4 V / 1000 mA to compatible packs, making it a practical charging link between a USB power source and the battery. The white 2-pin connector is matched to the stated XHP format, so the connection type is defined from the outset rather than left to guesswork. Its cable-based layout keeps the charger easy to store in a field box, tool case or workbench drawer, while the small inline module keeps the technical values visible on the unit itself. The charger is listed as an included accessory and is intended for compatible 7.4 V battery packs rather than loose cells or unrelated voltages. In day-to-day hobby use, the charger suits charging routines between driving sessions, maintenance charging for compatible packs, or a compact backup kept alongside RC gear. The 14+ age marking is stated plainly, and the focused specification makes this charger a clear match for setups that use a 7.4 V battery with a 2-pin XHP connection.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Wave Racer BL Replacement Battery, 7.4V Li-Ion

soon available again

The Wave Racer BL replacement battery is specified as a 7.4 V Li-Ion pack with 2500 mAh capacity, giving this power unit a clearly defined match for the named model. As a dedicated replacement component, it focuses the choice on the electrical values that matter for compatibility rather than on generic battery searching. The 7.4 V rating identifies the pack voltage, while the 2500 mAh capacity states the stored charge available within the battery. Li-Ion chemistry places those figures in a modern rechargeable format used for compact RC power packs. Because the product data names the Wave Racer BL directly, the battery can be read as a model-specific spare for maintaining an existing setup with the same stated specification. Batteries are not included with the main vehicle set. In practical hobby use, a replacement pack like this supports continued sessions when an original battery needs changing or when a matching spare is kept alongside the vehicle. The clearly stated voltage, capacity and Li-Ion format also make workshop checks and parts matching more straightforward when comparing an existing pack against the required values.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 Design 6 Spoke Wheel Set, model wheels

available in stores

A 1:10 touring model gains a sharper roadgoing stance with this Design 6 Spoke wheel set in silver. The set contains 4 complete wheel assemblies at 26 mm width, combining rims and tyres in one matching package for a clean, uniform update across the chassis. The silver 6 spoke layout gives each wheel a distinct alloy-style look that suits racing, street and tuned body styles. Because the assemblies are already mounted, the changeover stays focused on fitment and setup rather than matching separate rims and tyres. The 4-piece format supports a full vehicle refresh in one step, whether the goal is replacing used running gear or changing the visual direction of a build. On a 1:10 model, wheel design has a strong effect on the finished stance, and the broad 26 mm format helps fill the arches with a purposeful on-road look. In workshop use, the set suits rebuilds, seasonal refreshes and body changes where a consistent wheel style matters as much as the chassis itself. On the shelf or on the track, the silver finish and spoke pattern give a model car a crisp competition-inspired appearance. Age recommendation: 14 years.

RC tires & rims

1:10 M-Design wheel set, RC wheels, white gold

available in stores

A 1:10 wheel set can change the whole stance of a model, and this M-Design version does it with a sharp white and gold rim layout paired with black low-profile tyres. The 4 matching wheels bring a motorsport-inspired look to touring and drift builds, with the multi-spoke pattern giving the wheel face a clear, technical character. The tyre surface shows a directional tread design with moulded grooves that shape the visual style as much as the running feel. A central hub opening in each rim supports axle mounting on compatible RC vehicles, so the set suits both replacement work and visual updates on an existing chassis. The deep-look rim profile adds extra presence around the wheel arch, while the contrast between the white base and metallic gold spoke inserts gives darker bodyshell colours a stronger outline. The set is supplied as 4 wheels, keeping the appearance consistent across the full vehicle. Mounted on a touring car, drift shell or other 1:10 road-focused model, the wheel design brings out race-inspired body lines and sponsor-style graphics with a more defined finish. For workshop refreshes, rebuilds or custom projects, the M-Design layout adds a distinct tuning accent without altering the core setup of the model.

RC tires & rims

1:10 Rim Hub 12mm

only available from customer service

Carson 1:10 wheel hub 12 mm (500405799) is aimed at model builders and collectors who need specific spare parts for their 1:10 models. The 12 mm specification facilitates the selection of suitable wheel components and makes it possible to assign the hub to a specific wheel mount, thus completing your spare parts collection.

RC tires & rims

1:10 Spike Tyres vo./Fl. Yellow 3-sp.(4)

only available from customer service

Carson 500900074 - 1:10 Tire/Rim Set Buggy neon yellow (4) provides precise off-road traction for demanding model builders. The set contains four spike profiles with a total Ø of 85 mm, 40 mm width and 12 mm rim hub, suitable for all 1:10 models with 12 mm hub; ideal for off-road and soft surfaces.

RC tires & rims

1:10 Wheel Set (2)

only available from customer service

Carson 1:10 Wheel Set (2) - 500405804 offers two 1:10 scale wheels and is specially designed for model builders who want to supplement, replace or individualize their projects. The compact set facilitates the replacement within 1:10 vehicles and supports targeted modifications so that your model fleet remains complete and ready for use, whether in competition or in everyday use.   Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 wheel set Rally Design2 (4) gold

available in stores

The Carson wheel set 500900198 "1:10 Rally Des.2" in gold (4 wheels, 26 mm) enhances the look and driving dynamics of your model vehicle. Specially designed for all 1:10 scale models with 12 mm rim drivers, the special rubber compound combines strong grip with excellent handling, while the striking rim design makes your vehicle an eye-catcher for model building enthusiasts.

RC tires & rims

1:10 Y-Design5 Wheel Set, model accessory

available in stores

A 1:10 wheel set can change the whole character of a model car, and this Y-Design5 set does it with a clean grey and black finish, a 26 mm width and a distinctly road-focused look. The 4 matching wheels create a uniform appearance around the chassis, with the multi-spoke rim pattern giving the running gear a sharper, more technical presence. The low-profile tyre shape and curved tread pattern suit on-road and street-style builds visually, while the pre-mounted wheel format keeps the parts ready for direct fitting within a compatible setup. The dark rim colour works well with race shells, tuner bodies and modern touring car styles without overpowering body graphics or livery details. As a wheel set in the Models Supplies category, it also fits naturally into rebuilds, visual refreshes and spare-parts planning for regularly driven RC cars. The Y-Design5 design adds depth through its spoke cutouts and central mounting area, giving the side view of the model a more finished, competition-inspired look. Whether the goal is replacing worn running gear, refining a body-and-wheel combination or preparing a fresh chassis build, this 4-piece set brings a coordinated wheel solution in one pack. The 1:10 format makes it a practical choice for hobby benches where appearance, fit and a consistent road-car style all matter.

RC tires & rims

1:5 Wheel Set Desert Master XXL

only available from customer service

Carson 1:5 Wheel Set Desert Master XXL (500900100) is a wheel set consisting of two black wheels with M6 mounting for the Desert Master XXL in 1:5 scale. Model builders receive a suitable replacement or exchange option that can be mounted directly and consistently completes the appearance of the vehicle.

RC tires & rims

1:8 Hex Wheel nut (4) M12x1,00 V4/FY

only available from customer service

Carson 500908182 1:8 wheel nuts M12x1.00 (4) made of aluminum, 17 mm wrench size, 6 mm width and ribbed inside for a secure fit on the wheel. The four nuts fit Virus 4.0/4.1/4.2/Race/Truggy Brushless, Virus 4.0 Nitro as well as FY8, FY8 2.0, FY10 and FY10 2.0 and facilitate precise mounting.

RC tires & rims

1:8 Tyre Set Dish black 2pcs

only available from customer service

Carson 500405288 - 1:8 Dish tire/rim set, black: Two-piece wheel set for 1:8 scale models, consisting of two tires with Dish rims. Each wheel has a diameter of 115 mm. Ideal for replacing or customizing the look of your model; scope of delivery: 2 pieces. The set is suitable as a direct replacement for damaged wheels and for the specific visual adaptation of 1:8 models.

Additional accessories

1:8 Virus XL, body shell, black/red

available in stores

The 1:8 Virus XL body shell in black/red brings fresh race styling back to the buggy with a replacement shell set made for chassis reference 500409080. The black base, red accents and printed graphics give the outer body a sharp competition look that matches the Virus XL designation in the product data. As a body parts set, this version focuses on the buggy's visible upper bodywork rather than the running gear underneath. That makes it a practical choice when the original shell shows heavy wear, crash damage or a tired finish after repeated track sessions. The shell format also suits rebuild projects where the existing chassis remains in use and only the exterior needs replacing. Age marking: 14 Years. In workshop use, the shell can return a worn model to a cleaner, more finished appearance before the next run or display session. It also fits naturally into a spares setup for 1:8 RC buggy maintenance, where keeping the correct bodywork on hand helps shorten downtime between driving sessions.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

2500KV DRAKURO Motor

only available from customer service

2500KV Brushless Motor for DRAKURO 500409096 and 500409097

RC electric motors & controllers

60A 3S XT90 DRAKURO Controller

only available from customer service

60A brushless controller for DRAKURO 500409096 and 500409097 with XT90 connector

RC brushless motors

BL Motor Dragster-3 14T

only available from customer service

RC electric motors & controllers

Controller 4S XT90 Akuma

only available from customer service

Brushless controller for AKUMA 500409082 and 500409083 with XT90 plug  Warning! Not suitable for children under 14 years.