Carson RC

Carson

Carson 1:10 Mega Duster Bundle

Product bundle consisting of: 1:10 Mega Duster 3.0 2.4G 100% RTR / 7,4V/2600mAh LiION batt. FE-Line XHP/TAM   Article number: 500404292 Product: 1:10 Mega Duster 3.0 2.4G 100% RTR Powerful racer for off-road action: The Carson FE Mega Duster 3.0 doesn't stop at any terrain! The independent suspension, full suspension and extremely grippy high-grip off-road tires make the vehicle ideal for unpaved terrain. The Mega Duster is ready to run and equipped with 1x 2.4 GHz remote control system, 2x Li-Ion drive battery (7.4 V/1500 mAh), 1x USB charger, 4x LR06 / AA transmitter batteries and detailed instructions. Fully charged and at full capacity, a full 25 minutes of driving time is possible. The LED lighting, digitally proportional control and waterproof RC components complete the overall package and make the model appear not only high-quality but also easy to handle. Under ideal conditions, the vehicle can reach top speeds of up to 30 km/h. Included: Fully assembled model, 2.4 GHz RC system, LiIon powerpack 7,4 V / 1500 mAh, charger, transmitter batteries, manual.     Article number: 500608307 Product: 7,4V/2600mAh LiION batt. FE-Line XHP/TAM Experience Maximum Power with Our 2600 mAh Li-Ion Tuning Battery! With 7.4 volts of output and a Tamiya connector, it delivers extended run time and is the perfect choice for the FE line. Get the performance boost you’ve been looking for – now!  

RC truggies & RC monster trucks

1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR

The 1:10 Mega Duster 3.0 brings pick-up truck styling, LED lighting and a fully assembled RTR setup into a 430 mm off-road RC car built for rough ground. With independent suspension, coilover shocks and a fully suspended layout, the chassis is set up to absorb uneven surfaces while the multi-coloured printed body keeps the truck's desert-racer look clear in motion. Its 2.4 GHz radio system uses digital proportional control, so steering and throttle inputs can be fed in with fine adjustment rather than simple on-off commands. The included Li-Ion drive battery is rated at 7.4 V and 1500 mAh, and the USB charger is part of the set, along with 4 AA transmitter batteries. At 310 mm wide and 200 mm high, the truck carries a broad monster-truck footprint, while the stated weight of 1364 g supports a planted feel over gravel and dirt. Splash-proof electronics expand the running window when the surface is dusty or damp, and the stated driving time reaches up to 25 minutes. The Mega Duster 3.0 suits open ground, compacted trails and loose stone where the 115 mm all-terrain tires can work for grip and control. Age 14+ is stated for this model, and the fully assembled format gets the focus quickly onto driving lines, throttle control and off-road handling rather than workshop time.  Warning! Not suitable for children under 14 years.

RC cars

1:32 Deemon X, RC buggy, 100% RTR 2WD

€29.99

Compact scale and lively handling give the 1:32 Deemon X the feel of a true off-road RC buggy in a format built for quick runs at home or on small garden tracks. The 2WD layout, 2.4 GHz remote control system and selectable speed levels create a clear, responsive driving setup, while the elaborately printed body shell and switchable LED lighting keep the model visually sharp in motion. At 115 mm long, 86 mm wide and 53 mm high, the buggy fits neatly into tabletop courses, improvised obstacle lines and tighter turns where larger vehicles need more room. The 3.7 V 100 mAh LiPo drive battery supports up to 15 minutes of driving time, and recharging happens via the included USB charger. Included pylons and the jump ramp add concrete course elements for slalom sections, launch points and repeatable stunt practice rather than simple straight-line driving. The 69 g weight keeps the model nimble when changing direction, and the rubber tires give the chassis the grip needed for uneven surfaces. Short sessions on indoor floors, hallway tracks or paved garden paths suit the Deemon X especially well, whether the focus is clean cornering, quick acceleration bursts or ramp jumps. With 2 speed settings and a complete RTR package, the buggy moves easily between first RC laps and fast, compact course driving

Models & trailers

1:12 MB Unimog U300 THW, RC truck, 100% RTR

The Unimog line became known for compact dimensions, portal-axle capability and utility work across rough terrain, and that character carries into this 1:12 MB Unimog U300 THW RC truck. In blue THW livery, the model combines a 450 mm body length with a powerful electric motor, front LED lighting and a 2.4 GHz control system for controlled driving on paths, gravel and other uneven ground. Its 220 mm width and 260 mm height give the truck a tall, purposeful stance that suits the U300 shape, while the 2052 g weight adds substance in motion. The remote control handles steering and throttle proportionally, so small stick inputs translate into finer changes than simple on or off control. A separate horn function can be triggered from the transmitter, and motor sound control adds another layer to the driving scene. The 7.4 V 850 mAh Li-Ion drive battery is included, and the RTR setup also includes the 2.4 GHz transmitter, a USB charger and transmitter batteries. That combination suits first runs in the hobby as well as relaxed utility-style driving sessions with a scale vehicle theme. On compacted dirt, paving or loose gravel, the THW truck can be guided through tighter turns, short climbs and stop-start route changes while the illuminated front end keeps the model visually defined.

RC cars

1:10 Dustor, RC car, 2.4 GHz 100% RTR

€69.99

The 1:10 Dustor brings full-size RC presence to first runs and casual off-road sessions, with a 540 mm length, 300 mm width and 240 mm height that give the model a broad, planted stance on mixed surfaces. A brushed motor drives the 2WD rear-wheel-drive layout to speeds of up to 20 km/h, while the 2.4 GHz radio system reaches up to 75 m for clear control across open ground. Its fully assembled format keeps the focus on driving, and the included 7.4 V 500 mAh Li-Ion battery works with the USB charger for straightforward turnaround between sessions. At 985 g, the chassis stays light enough for responsive direction changes while still carrying the visual weight expected from a 1:10 off-road model. Front and rear impact protection support everyday running where gravel edges, kerbs and clipped markers are part of the route. The included transmitter is powered by 2 x LR06 AA batteries, so the full set is prepared for use without extra radio equipment. On asphalt, compacted paths or light terrain, the combination of suspension travel, rear-drive handling and off-road tires creates a controlled, approachable driving character. With up to 30 minutes of running time per charge, the Dustor suits park runs, open-yard driving and repeated practice laps where longer sessions matter.

RC tractors

1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer

€99.99

The DEUTZ-FAHR 8280 TTV brings the look of a modern farm tractor into 1:16 scale with a matching trailer, 2.4 GHz radio control and working sound functions. Engine sound, horn and LED front lighting create a more lifelike driving scene, whether the tractor is rolling across loose soil, garden paths or a carefully arranged display setup. At 750 mm long, 180 mm wide and 234 mm high, the model has a substantial footprint that suits towing and transport play. The rigid axle supports off-road running, while the steering is tuned for precise control and a small turning radius, helping the tractor change direction cleanly and guide the trailer through tighter spaces. The officially licensed DEUTZ-FAHR styling carries the 8280 TTV identity into the bodywork, giving the model a recognisable agricultural character. The accessible battery compartment under the hood allows quick battery changes between runs. Included are the ready-to-run tractor with trailer, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR03 AAA transmitter batteries. With a weight of 1731 g and a driving time of 90 minutes, the set is equipped for extended driving sessions focused on towing, positioning and farm-style transport action.

RC lorries & RC trucks

1:20 MB Arocs Goldhofer, RC truck, 100% RTR

€109.99

Heavy-haul transport is a defining part of construction logistics, and the 1:20 MB Arocs Goldhofer brings that role into RC form with a 1000 mm long truck and low loader combination. The fully assembled RTR set combines remote-controlled driving with functional trailer handling, creating a model that looks at home moving machinery between workshop shelf and jobsite scene. At 155 mm wide and 185 mm high, the model carries the long, low stance of a transporter, while the 1350 g weight gives the combination a substantial feel in hand. The installed reversing light works automatically together with the tractor unit, adding a realistic response during manoeuvres without needing a separate command. Included in the set are the ready-to-run model, a 2.4 GHz RC system, 2 x 4.8 V NiMH batteries, a USB charger and 2 x AA transmitter batteries. The 30 minute driving time supports extended loading runs, repositioning moves and repeated coupling sequences. Minimum age: 8 years. The low-bed layout suits transport scenes with construction machinery or other scale loads, and the remote-controlled ramp and support add movement beyond simple forward driving. On a floor layout, workshop setup or construction-themed display, the MB Arocs Goldhofer turns loading, uncoupling and trailer positioning into the central part of the action.

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage RC car

€17.99

The Aston Martin V12 Vantage brings a well-known British sports car shape into a compact 1:60 Nano Racer format with radio control and a red body that stands out clearly on small driving layouts. Its officially licensed appearance follows the full-size model closely, while the 79 mm length, 33 mm width and 22 mm height keep the car suited to short straights, table-edge turns and quick direction changes in limited space. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The controller works on 2.4 GHz and reaches up to 15 m, giving the car enough room for indoor laps and compact obstacle courses. The same control system allows up to 50 vehicles to run simultaneously, which opens the door to group sessions without frequency clashes. With a weight of 25 g, the small chassis stays easy to handle between runs, and the battery delivers up to 10 minutes of driving time per charge. On a living room floor, a desk track or a small race setup, the Nano Racer format turns narrow spaces into usable circuits. Short driving sessions, quick charging through the controller and the compact footprint make this RC car a neat choice for spontaneous races, collecting and casual practice runs.

Mini RC cars

1:60 Nano Racer Fo.Must.ShelbyGT500, RC car

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle car presence, and this 1:60 Nano Racer translates that character into a compact RC format. At 79 mm long, 33 mm wide and 22 mm high, the miniature car stays small enough for quick driving sessions on tables, smooth floors or improvised indoor courses while still carrying the licensed Ford look. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The 2.4 GHz radio system gives the car responsive control and allows up to 50 vehicles to run simultaneously, which suits group races without frequency clashes. A 15 m control range leaves room for short sprints, turns and head-to-head runs, while the 25 g weight keeps the handling light and agile. The remote control also serves as the charging point, so the battery can be charged directly through the controller. With up to 10 minutes driving time, the Nano Racer fits quick race breaks, compact home circuits and repeated short sessions where several cars share the same space. The small footprint and simple control layout also make it easy to set up spontaneous races whenever a smooth surface is available.

RC buggys

1:8 Drakuro BL 3S, RC car, 4WD RTR

€299.99

The 1:8 Drakuro BL 3S RTR brings brushless power, long-travel suspension and a wide 370 mm stance into one large-scale RC car built for fast off-road running. At 500 mm long, 330 mm high and 3402 g in weight, the chassis carries real presence on dirt tracks, gravel stretches and open ground, with a top speed of up to 65 km/h. A longitudinal aluminum reinforcement brace adds rigidity through the centre of the chassis, and reinforced steel drive shafts at the front and rear transfer power under load. The waterproof 30 kg steering servo uses metal gears for direct steering input, while splash-proof electronics and housing support running in changing conditions. Height-adjustable body mounts make it easier to set the shell position cleanly over the chassis, and LED lighting at the front, rear and roof keeps the model clearly defined when the light drops. The XT90 high-current connector system is designed for low-loss power transmission within the drive setup. The ready-to-run package includes a 2.4 GHz remote control and instructions, so the focus stays on driving rather than sourcing the core control gear. With 14 Years marked in the data, the Drakuro suits high-speed bashing sessions, repeated acceleration runs and broad off-road lines where suspension travel, steering force and chassis size all come into play.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B 200/8, RC car, 100% RTR trailer

€114.99

The Mercedes-Benz /8 series shaped everyday road traffic in the late 1960s and 1970s, and this 1:87 M-B 200/8 captures that classic saloon presence in a compact RC format. The green body and matching trailer combine a recognisable road-car silhouette with radio-controlled movement, creating a small-scale setup that carries both collector appeal and active driving use. Its 1:87 scale makes the model easy to place on a desk, shelf, or layout, while the trailer adds a second element that changes the overall scene and gives the combination a more complete towing look. The 100% RTR specification means the driving package is prepared for immediate use, and 5 included batteries cover the initial power requirement stated in the data. With a minimum age marking of 14 years, the model sits in a hobby-focused range rather than a preschool toy segment. The compact format also suits short driving sessions where a larger RC vehicle would need more floor space. Whether used for careful indoor manoeuvres, as a small addition to a model collection, or as a road-car counterpart within a miniature vehicle lineup, the M-B 200/8 with trailer brings motion into a classic passenger-car theme. The combination of saloon and trailer gives the setup a distinct identity both at rest and in operation.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B Unimog U406, RC fire engine, RTR

€109.99

The Mercedes-Benz Unimog U406 has long been known for compact utility and all-terrain presence, and this 1:87 RC fire engine translates that character into a format built for close-quarters driving. Fine printing, high-quality paintwork and front and rear LED lighting give the body a convincing emergency-service appearance, while the very small turning circle suits narrow routes between scenery, tools or display pieces. The chassis uses 2WD rear-wheel drive and a brushed motor for controlled running, with fully proportional steering and acceleration allowing measured inputs instead of simple on-off commands. That control layout makes a visible difference on a desk, in a diorama or anywhere space is limited, because the model can be guided through tighter lines with cleaner corrections. The 2.4 GHz system supports stable operation, and the permanently installed 3.7 V 75 mAh Li-ion drive battery keeps the compact body free from bulky battery changes. Charging takes place via the transmitter and takes around 30 minutes. As a 100% RTR version, the set arrives with the remote control, the drive battery and the batteries required for the transmitter. Up to 60 minutes of driving time supports longer indoor sessions, whether the model is weaving through a small layout, tracing service routes across a tabletop or adding movement to a scale scene.

RC models in 1:87 scale

1:87 MB 1620 Tarp Truck, RC truck, 100% RTR

€139.99

The 1:87 MB 1620 Tarp Truck with trailer brings moving road traffic into H0 railway scenes with compact dimensions of 187 x 28 x 38 mm and fully assembled 100% RTR equipment. Official Mercedes-Benz Trucks licensing, fine printwork and the blue finish give this RC truck a recognisable presence beside stations, freight depots and urban track sections. Its 2.4 GHz radio system supports interference-free control and allows several models to run at the same time, which suits busy diorama setups with more than one active vehicle. The very small turning radius helps the truck work through narrow streets, loading areas and switching zones where larger RC formats would look out of scale. The trailer extends the road-train silhouette and the removable tarp changes the look of the load area for different scene concepts. Included in the set are the ready-to-drive model, 2.4 GHz remote control system, Li-Ion drive battery 3.7 V / 75 mAh, 4 transmitter batteries LR03 / AAA, and instructions. On a layout, the truck can roll alongside trains, serve as a delivery vehicle near a goods shed or move through a city section with controlled speed changes and steering inputs. Collectors can also place it as a static display piece, with the integrated driver figure and licensed cab details carrying the scale effect even when the model is parked.

RC helicopters

Eagle 280 Crash Stop, RC helicopter, 2.4G RTF

The Eagle 280 Crash Stop brings compact RC helicopter flying together with a front crash-stop sensor that reacts to obstacles by stopping and backing the model away. At 200 mm long, 280 mm wide and 125 mm high, this 56 g coaxial helicopter suits controlled flights in tighter spaces as well as calm outdoor use. The 2.4 GHz control system gives the model its dedicated radio link, while the emergency stop button on the transmitter adds a direct way to cut the action when needed. A 3.7 V 250 mAh LiPo flight battery powers flights of up to 7 minutes, and the model reaches speeds of up to 25 km/h. The aluminium chassis gives the structure a firm core, and the coaxial rotor arrangement supports balanced lift for measured handling. Spare rotor blades are included, so the set is equipped for continued running after routine contact or wear. Indoor flights near walls, hallways or furniture benefit from the forward obstacle response, while open areas allow short hovering runs, lift-offs and landings with the same compact airframe. The ready-to-fly package includes the helicopter, remote control system, USB charger and transmitter batteries, so the set is prepared for flight after the first charging process.

RC speed boats

RC Fire Boat 2.4G, RC boat, 100% RTR

The RC Fire Boat 2.4G 100% RTR brings firefighting action onto the water with a remotely operated water cannon, LED position lights and a sporty rescue-boat look. At 560 mm long, 147 mm wide and 215 mm high, the hull has a strong on-water presence, while the 2.4 GHz radio system keeps control stable across distances up to 100 m. The fully assembled boat is supplied as a ready-to-run set with a 7.2 V 1000 mAh NiMH drive battery, USB charger, 2.4 GHz remote control and 2 x AA transmitter batteries. Full driving functions cover forwards, backwards, left and right, so manoeuvres can be varied between straight sprints, tight turns and controlled repositioning for water-cannon play. A driving time of 45 minutes supports longer sessions before recharging, and the boat weight of 717 g keeps the format easy to handle between shore and water. Whether used on a pond, at the lakeside or on calm stretches of water, the fireboat combines radio-controlled driving with an extra action feature that changes how each run unfolds. Age 8 years+ marks the recommended age, and the included screwdriver supports the setup of the supplied components before the next launch.

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage, RC car

€17.99

The Aston Martin V12 Vantage brings British sports car character into a 1:60 Nano Racer format, combining licensed body styling with compact RC handling. At 79 mm long, 33 mm wide and 22 mm high, the black coupe keeps a low, planted look that suits short sprints across tables, smooth floors and small driving spaces. Its 2.4 GHz radio system gives the model a dependable link to the controller across 15 m, and the layout also allows up to 50 vehicles to run at the same time. That makes the small scale especially lively in group sessions, where several cars can share the same area without constant frequency conflicts. The ready-to-run setup keeps the focus on driving, while the included 1.2 V 80 mAh NiMH drive battery matches the compact chassis and the 25 g weight for quick, light movement. Charging runs directly through the remote control unit, so the car and controller work as one neat driving system. With a maximum driving time of 10 minutes, the Nano Racer suits short races, repeat laps and quick head-to-head runs. Age 4+ is stated in the product data. The included screwdriver supports battery access as part of the set contents, and the compact format makes the model easy to store between sessions.

RC speed boats

RC Yacht Hurikan, RC boat, 2.4 GHz RTR

€39.99

The Hurikan brings yacht styling and fast RC handling together in a compact 350 x 95 x 105 mm format built for lively water runs. Sand tones, white surfaces and dark window graphics give the hull a sharp, modern look, while the 2.4 GHz radio system keeps steering input responsive during laps across the lake. At 270 g, the model stays light in the hand for carrying to the shoreline, yet its twin-prop drive gives the boat the thrust needed for brisk acceleration on the water. Full driving functions cover forward, backward, left and right control, making tight turns and quick corrections easy to manage. The set includes a ready-to-run model, a 2.4 GHz remote control system, a USB charger, 2 x LR06 AA transmitter batteries and 2 spare propellers. The included 3.7 V 1200 mAh Li-Ion battery powers sessions of up to 40 minutes, and the drive engages only in water through the integrated shut-off circuit. That combination suits calm-lake outings, pond sessions and repeated practice runs where clean response matters as much as speed. Age 8+ marks the recommended age, and the complete RTR setup keeps the focus on steering lines, throttle control and fast passes across open water.

RC cars

1:24 Lamborghini Sian, RC car, 2.4GHz RTR

€24.99

The Lamborghini Sian brings super sports car styling into a compact 1:24 RC format, pairing a low, sharply shaped body with radio-controlled handling and a full ready-to-run setup. With a length of 195 mm, a width of 80 mm and a height of 49 mm, the model carries its proportions in a size that suits quick laps across smooth indoor surfaces. The 2.4 GHz remote control system supports stable command input during solo driving, while the 3.7 V Li-Ion drive battery with 500 mAh powers up to 60 minutes of ride time. At 172 g, the car stays light in hand and easy to place on the floor between runs. The included USB charger keeps the charging routine simple, and the set also contains 2 LR03 AAA transmitter batteries. A rear axle differential adds a mechanical detail that supports smoother cornering behaviour, while steering fine adjustment helps tune the driving line to the available space. LED lights at the front and rear keep the bodywork visible when the room gets darker and add extra presence during evening driving sessions. On a hallway course, around furniture legs or across a cleared living-room track, the compact dimensions, quick responses and detailed Lamborghini look create a focused RC session with a clear sports car character.

Mini RC cars

1:60 Nano Racer Fo.Must.Shelby GT500, RC car

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle-car presence, and this 1:60 Nano Racer translates that character into a compact RC format. With its licensed Ford design, red bodywork and stripe detailing, the small car brings a recognisable road-car silhouette to quick indoor driving sessions. The 2.4 GHz control system sends steering and throttle inputs over a range of 15 m, and it allows up to 50 vehicles to run simultaneously on the same frequency environment. Charging takes place through the remote control unit, which includes the charging connection for the 1.2 V 80 mAh NiMH drive battery. A full charge delivers up to 10 minutes of driving time. The ready-to-run format means the model, remote control with charging connection, NiMH drive battery, screwdriver and instructions are included. With dimensions of 79 x 33 x 22 mm and a weight of 25 g, the Nano Racer fits naturally into compact race setups where short straights, quick direction changes and close duels matter more than sheer size. The small scale also makes it easy to line up several cars for simultaneous runs, turning a table, hallway or smooth floor into a miniature racing scene with very little space required.

RC models in 1:87 scale

1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz

€129.99

The Mercedes-Benz O 302 shaped coach travel across Europe for years, and this 1:87 RC bus brings that familiar silhouette into moving H0 scenes with licensed bodywork, raspberry red paintwork and front and rear LED lighting. At 112 mm long, 36 mm wide and 51 g in weight, the model sits naturally among buildings, platforms and road sections without overpowering the layout. Its 2WD rear-wheel drive works with a 2.4 GHz 3-channel radio system for controlled movement at up to 50 m, while the compact format helps the bus thread through tighter streets and station areas. The integrated 3.7 V Li-Ion battery with 75 mAh is built into the model, keeping the setup clean and the proportions true to scale. As a 100% RTR version, the set includes the remote control, the lithium drive battery, 4x AAA batteries, instructions and a storage case. The licensed Mercedes-Benz O 302 DB format gives the bus a recognisable road-going character that suits realistic transport scenes. On a model railway layout, the bus can roll between station forecourts, depot roads and town routes, adding controlled movement where static vehicles would otherwise remain fixed. The compact H0 scale format also suits shelf presentation between driving sessions, with the lighting and paintwork carrying the look of a classic DB bus into close-up display settings.

RC models in 1:87 scale

1:87 VW T1 SambaBus, RC car, 2.4GHz RTR

The VW T1 SambaBus with trailer brings classic touring style into compact RC form at 1:87 scale. The ready-assembled set pairs the iconic bus silhouette with a matching caravan, while front and rear LED lights add visible presence during each run. A 2.4 GHz remote control system handles the model with fully proportional inputs, so throttle and steering respond in fine steps rather than simple on or off commands. Steering trim helps keep the vehicle tracking cleanly, especially on narrow routes and detailed miniature layouts. The 3.7 V 75 mAh Li-Ion drive battery supplies the power, and the transmitter also serves as the charging connection with a 60 minute charge time. The compact format and very small turning radius suit controlled driving in limited space where broader models would need more room. The combination of SambaBus and caravan creates a distinctive road-trip scene for shelf display, diorama use or active driving sessions. Included in the set are the ready-to-run model, the 2.4 GHz remote control system, the Li-Ion drive battery and 4 AAA transmitter batteries, so the model is equipped for use straight from the set.  Warning! Not suitable for children under 14 years.

RC aircraft

Easy Skydreamer, RC aircraft, 2.4 GHz RTF

€29.99

The Easy Skydreamer brings a compact flying-wing layout, twin propellers and 2.4 GHz control into a light RC aircraft that is built for straightforward handling in open-air flying sessions. At 240 mm long, 240 mm wide and just 20 g in weight, the airframe combines a small footprint with a notably light feel that suits quick launches and controlled passes. Its 6-axis gyroscope works continuously in the background to steady the model in flight, giving steering inputs a calmer, more predictable response than an unstabilised layout. The Flexipor airframe adds another concrete advantage: the material keeps the structure light while coping well with the bumps that can come with early practice flights. Twin rear-mounted propellers support the aircraft's powered flight concept, and the included 3.7 V 150 mAh LiPo flight battery supplies up to 15 minutes of runtime per charge. The set is configured as 100% Ready to Run, so the core flying hardware is already matched for use. Included in the set are the flight-ready model, the remote control, the LiPo flight battery, a USB charger, 2 x LR06 transmitter batteries and 2 spare propellers. With its stabilised control concept and low 20 g weight, the Easy Skydreamer suits park flights, first RC take-offs and short practice sessions focused on smooth turns, level passes and repeatable landings.

RC helicopters

Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF

€29.99

The Easy Tyrann 200 Boost IR brings compact indoor helicopter flying into a 100% RTF format with a 240 mm body, 200 mm rotor diameter and a 3-channel infrared control system. Its gyro-supported flight stabiliser helps keep the model composed in the air, while the switchable boost function adds an extra burst of power when the pace needs to change. A 3.7 V LiPo flight battery with 250 mAh capacity powers flight times of up to 9 minutes, and charging runs through the included USB charger. The transmitter also controls the color changing LED, so the light effect can be switched during flight rather than staying fixed. With a top speed of 15 km/h and a flight weight of 31 g, the helicopter stays light enough for controlled indoor use while still delivering lively movement. The ready-to-fly set includes the model, IR remote control system, LiPo flight battery, USB charger, 3x LR06/AAA transmitter batteries and spare rotor blades. Short hovering runs in a living room, careful turns along a hallway or repeated take-offs and landings on a smooth floor all suit the compact format. Age 8 Years+

Models & trailers

1:12 MB Unimog U300, RC truck, 100% RTR

The MB Unimog U300 has long been known as a compact utility truck with strong off-road credentials, and this 1:12 RC version carries that working character into a fire brigade layout with covered rear bed, roof beacons and front LED lighting. At 450 mm long, 220 mm wide and 260 mm high, the model brings a substantial road presence while staying manageable for regular driving sessions. The fully assembled chassis is ready to run with a powerful electric motor, digital proportional control and a 2.4 GHz remote control unit. Steering and throttle inputs can be adjusted progressively, which gives the truck a more controlled feel than simple on or off commands when lining up turns or easing over rougher ground. The included 7.4 V 850 mAh Li-Ion drive battery supplies up to 60 minutes of driving time, and a USB charger is part of the set. Horn and motor sound can be triggered from the transmitter, adding another layer of interaction during runs. With a vehicle weight of 2052 g, the model has enough substance to suit its utility-truck character. Fire brigade markings, the covered cargo area and the upright Unimog proportions make this RC truck fit naturally into rescue-themed driving scenes, yard layouts or obstacle courses with gravel, paving and mixed surfaces. The included transmitter batteries complete the 100% RTR setup, so the model can head straight into its first run after charging.

Mini RC cars

1:50 Nano City Dump Truck, RC truck, 2.4 GHz

€18.99

Construction trucks have long shaped city streets and building sites with their compact strength and unmistakable working profile. The 1:50 Nano City Dump Truck brings that familiar form into a small RC format with a true-to-original design, a detailed driver's cab and a ready-to-run setup for immediate use. Its fully assembled layout keeps the focus on driving, while the 146 g weight and 135 mm length create a handy format for controlled manoeuvres on tables, floors or improvised indoor routes. The open dump body gives the model its recognisable utility-truck silhouette, and the non-slip rubber tires provide the grip needed for cleaner starts, tighter turns and steadier movement on smooth surfaces. The 2-channel 2.4 GHz radio system supports interference-free control, which is especially useful when several radio-controlled models are active nearby. LED lighting adds another working-vehicle detail and makes the truck easier to track when the route runs through dimmer corners. Included in the set are the ready-to-run model, a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery, a USB charger and instructions. With up to 40 minutes of travel time, the compact dump truck suits quick driving sessions, small construction-themed layouts and repeated laps through indoor obstacle courses.

RC models in 1:87 scale

1:87 M-B Unimog U406, RC truck, 100% RTR

€114.99

The Mercedes-Benz Unimog U406 has long stood for compact utility vehicle engineering, and this 1:87 RC version carries that character into a small-format driving model with a matching trailer. In bright orange with detailed paintwork and precise printing, the Unimog combines a true-to-original look with compact radio-control technology for controlled runs across a desk layout, a diorama road or a small indoor course. The 2.4 GHz remote control is part of the 100% RTR setup, so the model arrives with the core driving equipment already matched to the vehicle. Front and rear LEDs work alongside the switchable warning light to sharpen the service-vehicle appearance during operation. Steering trim on the transmitter helps fine-tune straight running, which is especially useful at 1:87 scale where small corrections show clearly. The permanently installed Li-Ion battery is rated at 3.7 V and 75 mAh, and the set also includes the required transmitter batteries plus a storage case for transport and tidy shelf keeping. The trailer broadens the operating scene beyond simple laps, with a tilting bed and removable tarpaulin that suit loading and unloading setups in miniature worksite or farm-style layouts. With age recommendation 14 years and up, the model fits hobby sessions focused on compact manoeuvres, display layouts and detailed vehicle handling in limited space.

RC yachts

Bella Luisa 2.4G, RC boat, 100% RTR

€69.99

Classic runabout styling meets radio-controlled action in the Bella Luisa 2.4G 100% RTR. The 455 mm motorboat combines a glossy wood-look finish, a clear curved windshield and chrome-look deck details with full steering control, creating a striking presence on ponds and small lakes. The hull measures 455 x 105 x 140 mm and weighs 648 g, giving the boat a slim, low profile on the water. Inside the set are a 2.4 GHz transmitter, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA transmitter batteries, so the model is fully assembled and ready for operation. The propeller drive reaches up to 10 km/h, while the water-activated motor start means the propeller engages only when the boat is on the surface. The detailed fairing and driver's cabin shape add to the leisure-boat look, and the cockpit area offers space for a play figure. On a calm garden pond, the responsive left-right and forward-reverse controls support neat manoeuvres along the bank or broad passes across open water. A driving time of up to 25 minutes leaves room for longer sessions before the battery returns to the USB charger.

RC speed boats

Sea Ray 2.4 GHz, RC boat, 100% RTR

€54.99

The Sea Ray 2.4 GHz brings twin 380 brushed motors, a streamlined hull and RTR convenience together in a compact RC boat built for fast action on the water. At 395 mm long, 190 mm wide and 100 mm high, it cuts a neat profile across ponds and calm lakes, with LED lighting adding a clear visual accent as the hull moves through changing light. The fully assembled format keeps the focus on driving rather than setup, and the included 7.4 V 600 mAh Li-Ion battery supports up to 20 minutes of running time per charge. A charging time of 3 hours keeps the routine straightforward between sessions. The 2.4 GHz radio system is designed for 1 player control, while the water-protected receiver and battery box help keep key electronics covered from spray. A built-in shut-off means the motors only run in water, matching the boat's intended use with a clear functional safeguard. Its lightweight 349 g build makes carrying the model from bag to bank easy, and the compact shape sits comfortably in hand at launch and recovery. With 2 AA transmitter batteries included, the set is ready for immediate use in suitable water conditions, whether the plan is short speed runs, repeated passes along the shoreline or relaxed practice with steering and throttle control.

RC aircraft

Stinger 2.0 2.4GHz 100% RTF, RC airplane

€49.99

The Stinger 2.0 2.4GHz 100% RTF brings a light 29 g airframe, intelligent gyro electronics and a ready-to-fly setup into one compact RC airplane built for controlled first flights and relaxed repeat sessions. With a length of 315 mm and a width of 385 mm, the model carries a broad wing layout that gives the aircraft a clear presence in the air while keeping the format easy to transport to open flying spaces. The Flexipor construction keeps weight low and supports the light handling that suits this class, while the 2.4 GHz control system allows clean command input without cable setup. A 3.7 V 300 mAh LiPo battery powers the airplane, and charging runs through the included USB charger. Spare rotor blades are included for continued use after routine wear, and the included 2x AA batteries complete the transmitter power supply. The gyro system works with the control inputs to calm the model in flight, which helps maintain a steadier line during climbs, gentle turns and landing approaches. Open ground, a sports field or another suitable flying area gives the 385 mm wingspan room to work through smooth passes and repeated take-offs. The ready-to-fly format keeps preparation focused on charging, switching on and heading into the next 20-minute flying session.

RC truggies & RC monster trucks

1:10 Bokusa BL 2S 4WD RTR, RC car, yellow

€219.99

The 1:10 Bokusa BL 2S 4WD RTR brings brushless power and monster truck stance into a ready-to-run RC car built for fast off-road sessions. Its 455 x 312 x 180 mm format and 2165 g weight give the chassis a planted footprint, while the yellow body adds a bold trackside look. A 30 kg waterproof steering servo with metal gears handles steering input with firm control, and the fully ball bearing mounted transmission supports efficient running across the drivetrain. Metal differentials at the front and rear use steel bevel gears, adding a solid mechanical base for repeated acceleration and braking. The 2.4 GHz remote control system is included, and the radio system is water-protected for running in changing ground conditions. An XT90 high-voltage battery connector system and a quick-change battery mount keep battery swaps straightforward between sessions. With a stated runtime of up to 15 minutes, the model suits short, fast runs on dirt, gravel and uneven surfaces where suspension travel and tyre grip can be used fully. Age 14 Years. A battery is required separately.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 100% RTR 4WD

€199.99

The 1:10 XS Tekuro brings a fast off-road setup into a ready-to-run format, combining permanent 4WD, a high-torque 550 brushed motor and up to 40 km/h for lively runs across dirt, gravel and rough ground. At 410 mm long, 300 mm wide and 175 mm high, the chassis carries a broad monster-truck stance that suits uneven terrain and quick direction changes. Completely mounted on ball bearings, the drivetrain is built to reduce drag through the transmission, while metal differentials at the front and rear use steel bevel gears for direct power transfer under load. The XT60 high-voltage battery plug-in system supports a secure connection for the included 7.4 V 2600 mAh Li-Ion battery pack, and the quick-change battery holder keeps swaps straightforward between sessions. Weight comes in at 1741 g, giving the chassis enough mass to stay settled as the suspension works through bumps. The rear bumper integrates a wheelie bar that supports controlled lift when the motor loads up hard from a standing start. The scope of delivery includes the 100% RTR model, 2.4 GHz remote control system, 2600 mAh 7.4 V drive battery, 1 A USB charger, 4 LR06 AA transmitter batteries and a manual. Driving time is about 15 minutes, making the XS Tekuro a strong fit for park runs, compact off-road tracks and loose-surface sessions where quick setup and solid traction matter.  Warning! Not suitable for children under 14 years.

RC cars

1:12 Glow Rider, RC buggy, 2.4 GHz RTR

€54.99

The Glow Rider brings 1:12 RC buggy action together with vivid LED lighting, creating a strong visual presence when the track gets darker and the body starts to glow in motion. At 340 x 215 x 123 mm and 570 g, the model combines a compact footprint with a planted off-road stance that suits quick direction changes and fast evening runs. The 2.4 GHz control system supports multiplayer driving without the close-range interference common to older frequency setups, which helps keep each buggy responsive during shared sessions. Full suspension works beneath the low body shell to absorb uneven ground and keep steering inputs more consistent over rougher surfaces. Grippy off-road tyres add traction where loose dirt, gravel or short grass would unsettle a road-focused setup. The ready-to-run package includes the assembled model, a Li-Ion drive battery, a USB charger and 2 AA transmitter batteries, so the full driving setup is in the box from the start. Age recommendation: 8 years and up. A paved yard at dusk, a compact dirt section in the park or a smooth evening track all suit the Glow Rider well, especially when the illuminated body can stand out against lower light. Up to 25 minutes of driving time at full capacity gives each session enough length for repeated laps, quick races and steady practice with throttle and steering control.

RC tractors

1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor

€84.99

The DEUTZ-FAHR 8280 TTV is recreated here as a 1:16 RC tractor with a detailed body, realistic driving functions and a strong farm vehicle presence. At 400 mm long, 180 mm wide and 234 mm high, the model carries the proportions of the original into a format that suits both active driving and shelf display. The ready-to-run set includes the tractor, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 transmitter batteries. Engine sound and horn add direct control inputs beyond steering and throttle, giving each run a more lifelike operating feel. The licensed DEUTZ-FAHR design is supported by cab details, body shaping and the characteristic tractor layout. With 5 frequency channels, the radio system provides stable control for solo driving sessions. Driving time reaches up to 90 minutes, allowing longer runs before recharging. On the floor at home, along a garden path or across lightly uneven ground, the compact dimensions and rigid axle help the tractor stay composed as it changes direction and tracks through tighter sections. Age 8 years+ marks the recommended age for use.

RC diggers

1:16 Volvo EC 160E, RC excavator, 100% RTR

€199.99

The Volvo EC 160E brings excavator handling into 1:16 scale with a ready-to-run RC setup, a true-to-original driver's cab and a working crawler layout built around 2 separately driven chains. With an operating weight of 2354 g and dimensions of 252 x 168 x 180 mm, the model carries a substantial presence while remaining manageable for controlled indoor driving and digging sessions. Its function package focuses on coordinated arm work rather than simple forward travel. The lifting arm and stick are made of plastic, and the spindle drive system moves the lifting arm, stick and bucket through deliberate, mechanical action that suits loading, lifting and placement tasks. The 2.4 GHz radio system supports single-user control, and the maximum operating time of up to 190 minutes allows longer work cycles before recharging. The included sheet metal shovel, scrap grab and excavator chisel shift the machine from earthmoving to gripping and breaking scenarios without changing the core vehicle. On a floor-based building site layout, the excavator can turn the uppercarriage through 360° to pick up, swing and place material within a compact work zone. The RTR package includes the model, remote control system, 7.4 V 1200 mAh Li-Ion drive battery, 3 LR06/AA transmitter batteries and instructions.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Pritsche, RC car, green trailer

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 RC version captures that familiar silhouette in a compact format with a green car trailer behind it. The radio-controlled layout turns the classic VW T1 Pritsche into a moving scale model that combines display character with active handling on a small footprint. Its 1:87 scale makes the model easy to place on layouts, shelves, or desks where larger vehicles would need far more room, while the trailer adds a second visual element that extends the transporter theme beyond the cab itself. The green finish gives the combination a clear, period-inspired presence, and the Pritsche body style keeps the utility look of the original vehicle at the centre of the design. As a powered ground vehicle, it brings motion to a format often chosen for static collecting, which changes how the model can be used between display moments and controlled runs. 5 batteries are included. The age marking is 14 Years. The compact dimensions implied by 1:87 scale suit short driving sessions on smooth indoor surfaces, model layouts, or table-based scenes where precise movement matters more than outright speed. It also fits neatly into collections built around classic transport themes, especially where a trailer combination adds extra visual interest without taking over the whole scene.

RC quadcopters

Cyber Drone Polizei, quadcopter, 2.4G RTF

€34.99

The Cyber Drone Polizei 2.4G 100% RTF brings compact quadcopter flying into a ready-to-fly format with a 2.4 GHz remote control, a 3.7 V 600 mAh LiPo battery and a USB charger. With a length of 125 mm, a width of 135 mm, a diameter of 150 mm and a rotor diameter of 45 mm, the layout stays light at 50 g ascent weight and suits quick take-offs in smaller open spaces. Its control setup combines several functions that shape how the model behaves in the air. The 8 minute flight time supports short, focused rounds, while the included transmitter power uses 3 AAA batteries. The headless mode changes orientation handling by referencing the control direction rather than the nose position, which helps keep steering inputs easier to read during turns. Trim adjustment for left and right flight allows finer correction when the quadcopter drifts off line. Blue and red flashing LEDs remain easy to spot once the model lifts away from the launch point. Ready-to-fly equipment keeps the set focused on getting airborne with minimal preparation, whether the session starts on a driveway, in a yard or across a calm section of park ground. The compact dimensions, return function and selectable speed levels make it easy to alternate between steady hovering, directional practice and quick stunt passes in the same outing.

RC cars

Magic Machine 2.0, RC car, 2.4 GHz RTR

€49.99

The Magic Machine 2.0 brings a striking twist to RC driving with a body that changes function at the touch of a button. In one moment it runs as a flat racer, and in the next it shifts into an off-road configuration with more ground clearance, creating a fast change of character on asphalt, ramps and rougher sections. Its layout combines separately steered front and rear units with all-wheel drive, so both axles work together as the vehicle changes direction. That unusual steering concept gives the model its own driving feel and supports quick reactions when obstacles appear in the path. The body design also allows the machine to flip backward over obstacles, continue driving on its back and right itself again to keep moving. LED lighting adds another visible detail during use, while the contrasting top and bottom styling makes each rollover part of the visual effect rather than a stop in the action. With a length of 340 mm, a width of 215 mm and a height of 123 mm, the model has a compact footprint matched by a weight of 570 g. The included Li-Ion drive battery delivers up to 25 minutes of driving time and is paired with a USB charger. A 2.4 GHz remote control in a game controller style is included, along with 2 AA transmitter batteries, so the ready-to-run set is equipped for immediate use after charging.

RC truggies & RC monster trucks

1:10 Bokusa BL 2S, RC car, 4WD RTR

€219.99

The 1:10 Bokusa BL 2S brings brushless power, 4WD traction and RTR convenience into a 455 mm off-road machine built for fast, dirt-focused running. With a width of 312 mm, a height of 180 mm and a weight of 2165 g, the chassis carries a broad, planted stance that suits rough ground and quick direction changes. Metal differentials at the front and rear use steel bevel gears to distribute drive across the axle line, while the fully ball bearing mounted transmission supports efficient running through the drivetrain. A 30 kg waterproof steering servo with metal gears gives the front end firm steering authority in wet or dusty conditions, and the water-protected 2.4 GHz remote control system keeps control input stable during outdoor sessions. The XT90 high-voltage battery connector system is paired with a quick-change battery mount, so battery swaps stay straightforward between runs. Age recommendation: 14 years and over. As an RTR model, the Bokusa BL 2S is set up for immediate driving once the required power source is added. Gravel tracks, compacted dirt and uneven open ground suit the suspension layout and tyre format especially well, while repeated acceleration runs benefit from the wheelie bar at the rear. Batteries are required separately.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Ryken, RC buggy, 100% RTR 4WD

€199.99

The 1:10 XS Ryken brings fast off-road running into a compact RTR format, pairing a 550 brushed motor with permanent 4WD for direct launches and steady pull across mixed terrain. At 410 x 300 x 175 mm and 1741 g, the buggy carries a broad, planted stance that suits dirt tracks, gravel paths and uneven ground. Power reaches the wheels through hardened steel drive shafts and a central steel cardan shaft, while front and rear metal differentials with sealed steel bevel gears keep the drivetrain precise under load. A chassis mounted on ball bearings supports efficient running, and the splashproof housing and electronics keep light rain and wet ground from stopping the session. The rear wheelie function uses targeted torque and traction control to lift the front end under acceleration, adding a distinct driving character beyond straight-line speed. A rear spoiler and rollover cage complete the body with added protection for the shell and electronics during tip-overs. The 100% RTR setup arrives pre-assembled with a 2.4 GHz remote control system, a 7.4 V 2600 mAh drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. That makes the XS Ryken ready for immediate running on open ground, from compact backyard courses to rougher off-road stretches where grip, suspension travel and drivetrain control all come into play.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Ryken, RC car, 100% RTR 4WD blue

€199.99

The 1:10 XS Ryken brings off-road action into a 410 mm long RC car with a wide 300 mm stance, 175 mm height and a ready-to-run setup built for immediate driving. Its blue body sits over a layout tuned for rough ground, where the combination of 4WD and generous clearance gives the chassis the grip needed for loose tracks, uneven paths and dusty sections. Power comes from a 550 brushed motor paired with a 7.4 V 2600 mAh Li-Ion drive battery, delivering up to 40 km/h and around 12 minutes of driving time. The hardened steel drive shafts transfer power with minimal play, while the sealed steel differential gears support clean, direct drivetrain response when dirt and vibration build up. The integrated wheelie function adds a distinct handling character by managing torque and traction so the front end can rise under acceleration. Oil-damped suspension helps the car settle after bumps and keeps the tyres working across broken surfaces. As a 100% RTR model, the set includes the ready-to-run vehicle, a 2.4 GHz remote control system, the drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. With a weight of 1741 g, the chassis carries enough presence for stable running on open ground, gravel stretches and wet outdoor surfaces where splashproof electronics matter.  Warning! Not suitable for children under 14 years.

RC cars

1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR

€54.99

The Lamborghini Murcielago SV translates the dramatic lines of the full-sized supercar into a 1:14 RC model with compact road presence and strong visual detail. At 330 mm long, 145 mm wide and 80 mm high, the body carries opening doors and a lifting hood that add hands-on interaction beyond pure driving. The detailed interior gives the cabin more depth when the body is viewed up close, while the front and rear LED system keeps the silhouette readable in lower light. A differential gear manages the drive effect between the wheels during turns, which helps the model hold a cleaner line through changing corners. Fully sprung suspension adds another mechanical layer, allowing the chassis to settle more evenly as the surface changes. The model weighs 631 g, giving it a planted feel in motion without losing the agile character expected from this scale. The fully assembled 100% RTR format keeps the focus on driving rather than setup, with a 2.4 GHz remote control unit included in the set. Also included are the 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR06 batteries. Driving time reaches up to 25 minutes, making the model well suited to repeated laps, short handling sessions and display breaks between runs.

RC buggys

1:8 Drakuro BL 3S 4WD RTR, RC car

€299.99

The 1:8 Drakuro BL 3S 4WD RTR brings brushless power, long-travel suspension, and a wide off-road stance into a ready-to-run RC car built for fast runs across mixed terrain. With a length of 500 mm, width of 370 mm, height of 330 mm, and weight of 3402 g, the chassis carries the planted footprint needed for high-speed driving and rough-surface control. A waterproof 30 kg steering servo with metal gears gives the front axle the force needed for direct steering inputs, while splash-proof electronics and housing support running where dust, spray, and loose dirt are part of the session. Steel differentials at the front and rear distribute drive through the drivetrain, and height-adjustable body mounts allow the shell position to be matched to the setup. The XT90 high-current connector system is designed for low-loss power transmission, supporting the demands of the brushless drive package under load. LED lighting at the front, rear, and roof keeps the body easy to track as conditions darken, and the rear bumper integrates a wheelie bar for hard launches under strong acceleration. The ready-to-run set includes a 2.4 GHz remote control and instructions. 14 Years marks the recommended age.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR

Few cars carry the visual identity of the Volkswagen Beetle as clearly as this 1:87 RC version in red. The rounded body shape, detailed paintwork and decoration, and illuminated front and rear LED lights bring the classic silhouette into motion on a compact scale. The ready-to-run set includes the assembled model, a 2.4 GHz remote control system, a 3.7 V 40 mAh Li-Ion drive battery and 4 AAA transmitter batteries. Fully proportional control allows measured throttle and steering inputs instead of simple on-off commands, which gives the small chassis a more precise feel in confined spaces. Steering trim on the transmitter supports straight tracking when fine corrections are needed. The transmitter also handles charging, with a 45-minute quick-charge time matched by a driving time of up to 45 minutes. A storage showcase is included for keeping the model protected between runs. With its very small turning radius, the miniature Beetle suits short indoor routes, desk-side driving and detailed diorama settings where tighter corners matter. The 1:87 scale also makes it a strong fit for collectors and model-layout enthusiasts who want a drivable classic car with compact dimensions and a finished RTR setup.

RC models in 1:87 scale

1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR

€114.99

The Volkswagen Beetle became one of the most recognisable car shapes of the 20th century, and this 1:87 RC version pairs that silhouette with a matching trailer for a compact driving set with strong period character. Detailed paintwork and decoration, front and rear LED lights, and the rounded body lines give the miniature a clear display presence even when parked between runs. Its 2.4 GHz radio system uses fully proportional control, so steering and throttle inputs can be adjusted smoothly instead of switching only between stop and full power. Steering trim helps fine-tune straight running, and the very small turning radius suits narrow routes on desks, shelves or indoor floors where larger RC models need more space. The included 3.7 V 40 mAh Li-Ion drive battery keeps the format compact, and the transmitter handles charging in 45 minutes. A storage showcase is included for presentation between driving sessions, and the set is marked 14+. The trailer adds a second moving element to the setup, changing the handling feel as the Beetle pulls a compact load through bends and turnarounds. Short evening runs, shelf display, or a small tabletop course all suit the 1:87 format, with the illuminated front and rear sections staying easy to spot as the model moves through tighter spaces.  Warning! Not suitable for children under 14 years.

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a nimble 125 mm x 135 mm format with a 150 mm diameter and a 45 mm rotor diameter. A button-triggered 360° flip function adds fast aerial action, while the Coming Home function returns the quadcopter to its home point at the touch of a button, creating a clear, easy rhythm between short flights and recovery. Its 3.7 V/600 mAh LiPo flight battery supports up to 8 minutes of flight time, and the 50 g ascent weight keeps the model light in the air. The IR control concept is paired with 3 speed settings, so the handling can stay measured for early practice or become more lively for tighter reactions. Blue LED lighting adds clear visual orientation once the quadcopter lifts off, especially when the frame is moving quickly through flips, turns and short climbs. The green finish gives the model a bright, high-contrast look in motion. Short sessions in the living room, open indoor areas or calm practice runs with repeated take-offs and landings all suit this ready-to-fly setup. Included contents are the ready-to-fly model, IR remote control, LiPo flight battery 3.7 V/600 mAh, USB charger and instruction manual.

RC speed boats

RC Boot Rescue 2.4G, RC boat, ready to run

€39.99

The RC Boot Rescue 2.4G brings rescue-boat styling and quick radio-controlled handling together in a compact 350 mm format. The red and yellow hull, raised cabin and roof light details create a clear emergency-service look on the water, while the 2.4 GHz control system keeps commands responsive during fast passes and tighter steering inputs. At 95 mm wide and 105 mm high, the boat combines a slim profile with a stable stance for controlled manoeuvres. Forward, backward, left and right control allows precise handling around pool edges, small obstacles and turning points. The fully assembled model comes as a ready-to-run set with remote control, a 3.7 V 1200 mAh Li-Ion battery, a USB charger and 2 x LR06 AA transmitter batteries. With a weight of 270 g, the hull stays easy to carry to the water and simple to set down for the next run. The water-activated circuit keeps the drive inactive on land and switches operation on only in water. Up to 40 minutes of running time supports longer sessions at the pond or in a larger pool, and the 2 spare propellers add a practical replacement set for regular use. Age recommendation: 8 years+

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

€74.99

The 1:10 Cage Fighter brings desert buggy styling, radio-controlled handling and ready-to-run convenience into one fast-moving off-road setup. As a fully assembled RC buggy with 2.4 GHz control, it heads straight into dirt tracks, packed gravel and open ground with a low barrier to entry and a focused motorsport feel. Its full suspension supports precise steering response when the surface turns uneven, while the grippy off-road tyres help the buggy hold traction across changing terrain. Solid bumpers at the front and rear add protection in the zones that take the hardest knocks during close running. At 436 mm long, 234 mm wide and 147 mm high, the chassis has a planted footprint that suits outdoor driving, and the 806 g weight keeps the model agile in direction changes. The included Li-Ion drive battery runs at 7.4 V with 500 mAh capacity, and the set also includes a USB charger, a 2.4 GHz remote control and 2 x LR06/AA transmitter batteries. Top speeds of up to 18 km/h add a brisk pace without pushing the model beyond approachable control. Whether the route runs over compacted soil, short grass or rougher backyard ground, the Cage Fighter is built for active RC sessions rather than shelf display. Age 8+ marks the recommended age, and the 100% RTR format keeps the focus on charging the battery, taking the controller in hand and getting the buggy moving.

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

€74.99

The 1:10 Cage Fighter brings fast off-road RC action into a ready-to-run format with a fully assembled chassis, 2.4 GHz radio control and a 7.4 V 500 mAh Li-Ion drive battery. At 436 mm long, 234 mm wide and 147 mm high, the buggy cuts a planted stance as it charges over dirt, gravel and uneven ground. Its full suspension helps the wheels stay in contact with the surface, so steering inputs translate into cleaner direction changes instead of skittish bouncing. The 806 g vehicle weight supports an agile feel without losing presence on the track. Front and rear bumpers frame the chassis with added protection in the zones that meet obstacles first, which suits repeated running in tighter spaces and rougher outdoor sections. The included USB charger keeps the battery routine straightforward, and the supplied 2 x LR06 AA transmitter batteries complete the set. With a driving time of 25 minutes and speeds of up to 19 km/h, the Cage Fighter suits short backyard sessions, improvised dirt courses and casual head-to-head runs with other 2.4 GHz models. Age 8+ is stated for this RC buggy, making it a strong entry point into radio-controlled driving while still offering enough pace and control to stay engaging beyond the first outings.

RC cars

1:10 Night Racer 2.0, RC car, 2.4GHz RTR

The Night Racer 2.0 brings low-slung on-road styling and ready-to-run RC action into one focused 1:10 setup, with a 2.4 GHz control system and a top speed of 20 km/h shaping fast laps on smooth ground. At 485 mm long, 200 mm wide and 125 mm high, the body cuts a sharp racing silhouette that stands out in motion and under evening light. A 260 mm wheelbase and a weight of 737 g give the chassis a balanced footprint for quick steering inputs and stable tracking through linked corners. The differential transmission helps the driven axle work cleanly when the car changes direction, while the suspension layout keeps the wheels in contact over uneven patches and transitions. The included 7.4 V 1200 mAh Li-Ion drive battery supports up to 40 minutes of driving time, and the USB charger keeps the running gear simple to prepare between sessions. Detailed paintwork adds a finished motorsport look, and the blue illuminated rim design sharpens the visual effect once the light drops. On a driveway, in a car park or across a smooth indoor surface, the RTR setup gets the car moving with the supplied remote control system and included transmitter batteries. The compact racing profile, quick response and illuminated wheel styling suit short speed runs, repeated corner practice and evening cruising alike.

RC cars

1:12 RaceRival Combo, RC car, 2.4G RTR

€59.99

The 1:12 RaceRival Combo brings 2 fully assembled RC cars into one set, creating instant side-by-side racing with matching 2.4 GHz radio control. Each model measures 304 mm in length and uses a 3.7 V Li-Ion drive battery with 500 mAh capacity, giving the pair a compact racing format with rechargeable power for repeated sessions. The set includes 2 remote controls, 2 Li-Ion drive batteries, 2 USB chargers and 4 AA transmitter batteries, so both vehicles are equipped for running from the start. A maximum driving time of 40 minutes keeps races going beyond a quick sprint and leaves room for repeated heats, overtaking attempts and back-to-back comparisons between the 2 cars. The pistol-grip transmitters use a trigger for throttle input and a side steering wheel layout familiar from hobby-grade RC driving. Steering fine adjustment on the vehicles helps correct the running direction when the track or surface calls for a more precise setup. Front LED lighting remains clearly visible as the cars move through indoor floors or paved outdoor sections, while the printed body shells give each model its own strong race-day presence. With an age marking of 8 years and up, the set suits shared racing sessions at home, quick duel formats in the driveway and casual practice laps where both cars can be charged, lined up and sent off again.

RC lorries & RC trucks

1:14 3-axle Material trailer, RC trailer

€699.99

At 1:14 scale, this 3-axle Material trailer brings the look and handling of a working cargo hauler into a detailed RC setup. The 981 mm long body combines a laser-cut steel frame in 3 mm and 1 mm sections with a real wooden floor application, creating a technical build with strong visual contrast between metal structure and load bed. The front wall is made from aluminium, while the rear bumper uses 8 mm aluminium for a solid, sharply defined finish. Left and right steel underride protection adds another authentic construction detail to the lower sides. The CNC-milled aluminium dropsides carry engraved surfaces and are built for active use rather than fixed display, with 9 functional panels, removable dropside posts, and 4 hinges on each dropside made from 1 mm steel. Neodymium magnets handle the locking, giving the side sections a tidy closing action without bulky external catches. Wide chromated wheels with ball bearings and wide tyres support smooth trailer movement, and the included suspension offers an optional 8 mm elevation for a different ride height. A steel spare wheel holder with spare wheel is fitted, and the finished trailer measures 981 x 195 x 210 mm with a weight of 6,900 g. Age 14+

Models & trailers

1:14 Goldhofer BAU STN-L3, low loader kit

€584.99

Heavy-haul transport has a distinct presence in scale form, and the Goldhofer BAU STN-L3 brings that character into a 1:14 low loader kit with a long 1000 mm body, a width of about 200 mm, and a height of 270 mm. The laser-cut, hard-soldered steel profile construction gives the trailer its technical look, while the plateau with tailgate extends the transport layout for detailed truck scenes. The build centres on mechanical functions that suit model-building enthusiasts. The split folding loading ramps are arranged in 3/4 and 1/2 sections and can be folded down by hand for driving operation. A ramp length of 290 mm in the raised configuration is stated in the data. Three rear axles carry twin tyres, and the axle area is detailed with dummy air springs for a scale heavy-duty appearance. Ball bearing mounting supports the running gear, and the 7-chamber taillights can be retrofitted electrically. All columns are mechanically adjustable, and the front support area can be expanded with optional E-support legs. The trailer fits all Tamiya trucks, making it a strong match for detailed tractor units in 1:14 truck layouts. On a workshop bench, in a transport diorama, or coupled for slow manoeuvres with scale cargo, the low deck, upright ramp geometry, and multi-axle layout create the look of a working heavy equipment hauler. Age 14 Years  Warning! Not suitable for children under 14 years.

RC tractors

1:16 Deutz-Traktor 8280TTV, RC tractor

€109.99

The Deutz-Traktor 8280TTV in 1:16 scale brings agricultural RC driving into a compact format with a matching trailer and a fully equipped ready-to-run setup. The model uses a 2.4 GHz remote control system and arrives with the drive battery, USB charger and 2 x LR03 AAA transmitter batteries, so all core components for operation are already in the box. Its 7.4 V system pairs with a 500 mAh Li-Ion battery to deliver up to 90 minutes of operating time, giving the tractor enough endurance for repeated hauling runs, careful reversing and steady trailer work. The trailer adds a second handling element to each session, since turns, alignment and positioning need more control than a single vehicle on its own. With 5 frequency channels available, the radio setup supports controlled input during forward runs, direction changes and tighter manoeuvres. The ready-to-run format keeps the focus on driving rather than sourcing the basic operating equipment separately. On the floor, the tractor and trailer combination suits routes with bends, loading-play setups and repeated parking tasks where the longer overall shape changes how each turn is approached. The 8+ age marking fits a model that combines vehicle control, trailer guidance and battery-powered runtime in one clearly structured RC format.

RC cars

1:24 Ford GT, RC car, 2.4 GHz RTR

€24.99

The Ford GT became one of the defining super sports car shapes of its era, and this 1:24 RC car brings that low, wide silhouette into a compact format built for quick laps and precise control. With a fully assembled ready-to-run setup, the model goes straight from charging to driving with the included 2.4 GHz remote control, Li-Ion drive battery, USB charger and transmitter batteries. At 195 mm long, 80 mm wide and 49 mm high, the body keeps the proportions of the road car clear while staying easy to handle on smaller indoor routes. The 172 g weight gives the chassis a light, agile feel in motion, and the fine-tuned steering supports accurate line changes through short straights and tighter bends. Front and rear LED lighting extends the visual effect beyond daylight conditions, while the licensed Ford design and realistic sports car look keep the model closely tied to its full-size inspiration. The 3.7 V drive system uses a 500 mAh Li-Ion battery and reaches up to 60 minutes of driving time at full capacity, making longer sessions possible without frequent charging breaks. Non-slip rubber tires work with the rear differential to maintain traction and stable handling as the car accelerates, turns and settles into repeated circuit runs. Age 6+ marks the recommended age, and the complete RTR format suits first RC laps as well as relaxed driving sessions for motorsport fans.

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

€174.99

The 1:8 Rock Wilder brings large-scale off-road presence to every run with a 530 mm long chassis, full suspension and digital proportional control. In black and red trim, the ready-to-run setup pairs a type 550 brushed motor with water-resistant RC components for driving on mixed terrain where dust, loose gravel and uneven ground are part of the appeal. Its 355 mm width and 220 mm height give the model a broad, stable stance, while the 2552 g weight adds substance as the suspension works through ruts and bumps. Reinforced suspension arms support the independent layout at each corner, and the quick-change battery mount keeps battery swaps straightforward between sessions. The included 7.4 V 3000 mAh Li-Ion drive battery, USB charger, 2.4 GHz remote control and 4× LR06 transmitter batteries cover the core running equipment in one box. Age recommendation: 14 years+ The Rock Wilder suits trackside bashing, open gravel areas and compact dirt routes where the proportional steering and throttle inputs can be used with precision. Water-resistant electronics help the model stay focused on the route when conditions turn messy, and the RTR format keeps the emphasis on charging up and heading out for the next run.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 MB 1620 flatbed truck, RC model, RTR

€129.99

The 1:87 MB 1620 flatbed truck with trailer brings compact RC control into H0 railway scenes with a fully assembled 100% RTR setup and finely scaled proportions. At 187 mm in length, the model is sized for dioramas and model railroad layouts where precise movement, lighting and sound add life to streets, depots and loading areas. A 2.4 GHz remote control system handles steering, speed and the switchable engine sound, while the integrated 3.7 V 75 mAh Li-Ion drive battery recharges through the transmitter in about 45 minutes. Front and rear LED lighting supports realistic operation in dimmer layout settings, and the very small turning circle helps the truck work through narrow routes and confined manoeuvring zones. The detailed body uses high-quality plastic construction with fine printing, and the removable tarpaulin changes the look of the trailer for different scene setups. A driver figure adds another scale detail for display, and the included trailer extends the vehicle's presence in transport scenes. With up to 60 minutes of operating time, the model suits longer running sessions on H0 layouts, from careful reversing at a loading bay to steady road movement between buildings and trackside structures.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Mercedes Benz 200/8 Taxi, RC car, RTR

€109.99

The Mercedes Benz 200/8 shaped the look of everyday saloons in the late 1960s and 1970s, and this 1:87 RC car brings that familiar taxi silhouette into a compact radio-controlled format. The small scale and RTR layout combine classic road-car character with immediate driving action on desks, display areas, or smooth indoor surfaces. Its 100% RTR specification means the key running setup is already part of the set, keeping the focus on steering inputs and controlled movement rather than sourcing core equipment first. The included 5 batteries support a ready-to-start configuration straight from the pack. With a recommended age of 14 years, the handling and scale suit enthusiasts who enjoy compact vehicle models with a recognisable real-world subject. The taxi styling gives the body a distinct period look that stands apart from modern racing or off-road themes. Between short driving sessions, the 1:87 format also makes the model easy to place in a collection of miniature road vehicles. It works well as a small RC model for indoor runs, as a conversation piece on a shelf, or as a classic Mercedes Benz subject in a compact hobby lineup.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Mercedes Benz 200/8, RC car, 100% RTR

€109.99

The Mercedes-Benz /8 series shaped everyday motoring in the late 1960s and 1970s, and this 1:87 Carson model captures that familiar saloon silhouette in a compact radio-controlled format. Finished in blue and supplied as a 100% RTR version, the miniature is set up for immediate use with 5 batteries included. Its 1:87 scale gives the model a notably small footprint, making controlled runs possible in spaces where larger RC cars would feel oversized. The classic 200/8 body shape brings a recognisable road-car character to each manoeuvre, while the compact format invites careful steering, short direction changes and neat placement on smooth indoor surfaces. With batteries already part of the set, the focus stays on the driving session itself rather than on sourcing the basic power supply first. Between runs, the blue finish and saloon proportions also make the model easy to place on a desk or shelf as part of a collection of compact vehicles. The combination of RTR convenience, included batteries and 1:87 scale makes this Mercedes Benz 200/8 a concise entry into small-format RC driving for hobbyists aged 14 years and up.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW Beetle, RC car, 2.4 GHz RTR

€104.99

The Volkswagen Beetle remains one of the most recognisable car shapes of the 20th century, and this 1:87 RC version translates that silhouette into a compact model built for active driving. At 50 mm long, 20 mm wide and 18 mm high, the Bahama blue Beetle combines miniature scale with fully controllable handling and a detailed body that carries the character of the original into H0 format. Its 2WD RWD layout works with a brushed motor to deliver balanced running behaviour, while the 10 g weight keeps the model light on the surface. The officially licensed Volkswagen design is matched with front and rear LEDs that define the car clearly as it moves through table layouts, floor circuits or display-style street scenes. The 100% RTR set includes a permanently installed 3.7 V 40 mAh Li-Ion battery, 4x AAA transmitter batteries and a storage case, so the driving setup is complete straight away. The 2-channel radio system supports controlled runs with a range of up to 50 m, making the Beetle suitable for compact slalom routes, desk-side driving and small indoor courses where accurate line changes matter. Age marking: 14 years. Charging takes place through the transmitter and keeps the model ready for regular sessions between laps.

RC models in 1:87 scale

1:87 VW T1 Bus Van, RC car, car trailer

€114.99

The VW T1 became one of the most recognisable light commercial vehicles of the 1950s, and this 1:87 RC version brings that silhouette into a compact driving format with a matching car trailer. At 115 mm long, 28 mm wide and 21 mm high, the ready-to-run model fits neatly into small layouts while still carrying the bus profile, printed finish and illuminated front and rear lighting. The 2.4 GHz radio system gives stable control for 1-player operation, and the fully proportional setup allows measured inputs instead of simple on-off movement. With a weight of 18 g, the model stays light in hand and easy to place on shelves or in model scenes between runs. The included Li-Ion drive battery is rated at 3.7 V and 75 mAh, while 4 LR03 AAA transmitter batteries are also included in the set. Steering trim supports precise correction when the bus tracks slightly left or right, which is especially useful on narrow routes where the small turning circle can be used to full effect. The display case adds a clean way to store the bus and trailer between sessions or present them as part of a collection. On a desk, shelf layout or compact indoor course, the combination of trailer detail, proportional control and long 50-minute runtime creates a focused micro RC driving session with a strong model-railway scale presence.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Kastenwagen Jägermeister, RC car

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 Carson version translates that familiar panel van shape into a compact RC format with Jägermeister livery. At 50 mm long and 20 mm wide, the model brings authentic proportions, detailed printing and front and rear LED lighting to desks, shelves and small indoor driving spaces. Its fully proportional control system gives measured steering and speed response instead of simple on-off inputs. A steering trim function helps fine-tune straight running, while the very small turning radius suits narrow table courses and close obstacles. The 2.4 GHz radio system supports stable control, and the sensitive forward and reverse function makes low-speed corrections easier in confined spaces. A brushed motor and 2WD RWD layout shape the driving character, while the permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time. With a height of 19 mm and a weight of 16 g, the van stays easy to place and store between runs. The set includes a display case for storage, which also keeps the miniature body protected when the model is off the course. 4x AAA transmitter batteries are included, so the RTR format covers the essentials for immediate indoor driving.

RC helicopters

Cyber Copter IR 2Ch, RC helicopter, RTF

€21.99

The Cyber Copter IR 2Ch brings compact helicopter flying into a ready-to-fly format with a modern grey fuselage and a focused control layout. At 230 mm long, 95 mm high and with a 190 mm rotor diameter, this RC helicopter stays compact enough for indoor sessions while reaching speeds of up to 10 km/h. Its flight system combines infrared control with 2 channels for clear directional input, and the integrated gyroscope helps keep movement steady once airborne. Fine tuning comes from individually adjustable left and right trim, allowing the flight path to be corrected to suit the room and the handling style. The switchable LED position lights are activated from the transmitter, making the model easier to track visually when the light drops at dusk. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime per charge, and the USB charger keeps charging straightforward between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8 Years

RC yachts

Nano Racer Yacht 2.4G

€19.99

RC action on the water! With the Nano Racer Yacht, luxury RC fun on the water is realized. The ready-to-run yacht model delivers full driving fun right after unpacking and brief charging. It is controlled with a 2.4 GHz radio remote control and offers a range of up to 40 meters. Thanks to the safety shutdown, the propellers only work when the model is in contact with water. All RC components are water-resistant, making the yacht ideal for exciting action on the water. The set includes a LiPo battery and clear instructions for quick start-up. Compact, fast, and easy to control, the Nano Racer Yacht is a fun watercraft for hobby and play.

RC helicopters

Nano Tyrann 230 Gyro, RC helicopter, 2CH IR

€24.99

Compact dimensions and a coaxial rotor layout give the Nano Tyrann 230 Gyro a light, agile presence in indoor flight, while intelligent gyro electronics keep the model composed during lift-off, hovering and direction changes. At 225 mm long, 97 mm high and only 31 g in weight, this 2-channel RC helicopter brings controlled handling into a format that is easy to store and quick to prepare. The infrared control system focuses the flying experience on the core inputs, with left and right trim on the transmitter to correct the track when needed. A 3.7 V 130 mAh LiPo flight battery powers up to 8 minutes of flying time, and charging runs through the included USB cable. The rotor diameter of 180 mm gives the helicopter a balanced footprint for indoor rooms, where short climbs, hovering practice and careful turns can be repeated in a manageable space. The switchable LED adds a visible point at the nose during flight and can be controlled directly from the transmitter. The ready-to-fly set suits spontaneous sessions in living rooms, hobby spaces or other indoor areas where compact RC aircraft can be flown with precision. Age 12 years and up. Only suitable for indoor use.

RC quadcopters

X4 Quadcopter Yairo, RC aircraft, 2.4 GHz RTF

The X4 Quadcopter Yairo brings compact quadcopter flying together with illuminated detail and straightforward control in a ready-to-fly format. With a ring diameter of 150 mm, a height of 37 mm and a weight of 52 g, the model stays light and agile in the air while the three-colour LED setup gives each flight a vivid visual presence. Its electronically rotatable LED ring is controlled by the remote control, adding a moving light element that changes the look of the quadcopter during flight. The 3.7 V 500 mAh LiPo flight battery supplies up to 8 minutes of runtime, and the included USB charger keeps the setup simple between sessions. 4 frequency channels support responsive handling, while the compact dimensions make the model easy to carry to open indoor spaces or calm outdoor areas. The included LR06/AAA transmitter batteries mean the full set is ready for use straight from the contents provided. Short practice flights, evening hovering sessions and quick manoeuvre runs all suit this RC aircraft well. The 8+ age marking and 1-player format make it a focused flying model for learning control inputs, refining reactions and enjoying illuminated flights with a compact quadcopter layout.

RC speed boats

XS Deep Sea Dragon, RC submarine, 100%RTR

€39.99

Compact RC submarines bring a different kind of model action, and the XS Deep Sea Dragon shifts that action below the surface. This 100%RTR RC submarine combines a compact orange hull, 3-channel 40 MHz control and blue LED illumination for visible manoeuvres in baths, pools and aquaria. The set includes the mini submarine with RC system, a 3.7 V 90 mAh Li-Ion drive battery, a USB charger, 2 transmitter batteries and instructions. Forward, backward, left and right steering are joined by dive and surface functions, so movement is not limited to a flat path across the water. The blue LEDs stay visible during operation and help keep the model in view while it changes depth. With up to 6 minutes of runtime, each charge suits short underwater runs with a clear start and finish. The USB charging cable can be stowed in the transmitter, so the charging lead stays with the control set between sessions. In use, the compact format suits smaller water spaces where tight turns and depth changes stay easy to follow. Age 8+ marks the recommended age. The submarine is intended for fresh water use in swimming pools, baths and aquaria; do not use in salt water.

RC tires & rims

1:10 2WD Wheel Set XL, RC tire set

€37.99

Give your 2WD RC buggy or truck a massive performance upgrade with the Carson 1:10 XL Wheel Set. This specially designed set is the ideal solution for model builders who want to give their vehicle an impressive “monster” look and improved off-road capability. What makes this set special is its precise tuning: Since XL tires can affect conventional steering angles, Carson includes the matching steering levers right in the package. These are engineered exactly to perfectly compensate for the larger wheel diameter of 105 mm and ensure full maneuverability. The technical details are specifically designed for the Tamiya DT-02 and DT-03 chassis —while the front rims are designed to directly accommodate ball bearings, the rear rims use the proven 12mm hex drive, which is standard on Tamiya and many other brands. The black-and-white color scheme also provides a modern, sporty look. Whether on loose gravel or rough terrain, the wide 65-mm contact patch guarantees optimal traction and stable handling.

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD

€31.49

Built for 1:10 2WD buggies and trucks, this 4-piece all-terrain wheel set brings a track-ready combination of steering precision and drive traction to mixed surfaces. The black and white wheel design pairs 2 front tyres and 2 rear tyres in different widths, creating a layout that suits the demands of a 2-wheel-drive setup on road, gravel, sand and grass. At the front, the 26 mm tyre width supports a more exact steering response, while the 43 mm rear tyres give the driven axle a broader footprint for stronger acceleration grip on loose ground. Each wheel has a 90 mm diameter, giving the chassis a useful balance of agility and clearance over uneven terrain. Foam inserts inside the tyres help the contact patch stay consistent as the model changes direction or loads up under power. The front rims are designed for ball bearings, and the rear rims use Tamiya hex mounts, matching the different mounting needs across the vehicle. Because the tyres are professionally pre-glued, the set goes straight into the workshop plan without a separate bonding step. That makes it a practical choice for replacing worn running gear, preparing a buggy for mixed-surface driving, or setting up a truck for more dependable traction away from smooth tarmac.

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD/4WD

€31.49

Built for mixed-surface running, this 1:10 all-terrain wheel set combines a 90 mm diameter with a 2WD/4WD layout that suits a wide range of RC setups. The 4-piece configuration uses 2 front tyres and 2 rear tyres, creating a purposeful combination for models that need clear steering response at the front and stronger drive support at the rear when the surface changes from asphalt to loose ground. The front tyres measure 26 mm in width, while the rear tyres measure 43 mm, giving the set a staggered format that supports balanced handling under acceleration. Black and white rims add a clear competition-inspired look, and the tyres are professionally pre-glued to the rims for a clean fit straight from the pack. Integrated foam inserts help the tyres hold their shape during intensive driving manoeuvres, so the tread can work consistently as the model loads up in turns and over uneven sections. The wheel set is designed for 4 x 12 mm Tamiya hex mounts, making it a practical replacement set or a fresh running option for compatible chassis. On road, gravel, sand or grass, the all-round tread is aimed at drivers who switch between surfaces instead of tuning for only one. The set suits routine replacement after wear, but also works as a handling-focused update when a model needs broader traction coverage for everyday RC running.

RC combustion engines & glow plugs

1:10 BL Motor Dragster Turbo 2.0, motor

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 3200KV is a brushless drive unit created for electric RC vehicle projects with a clear focus on dragster-style power delivery. Its 3200KV specification points to a fast-revving motor character that suits straight-line acceleration setups and gives model-building enthusiasts a concrete tuning component for 1:10 platforms. As a standalone motor, this unit fits into workshop-based RC builds where the drive system is chosen part by part. The brushless layout makes it a relevant option for hobbyists comparing replacement motors or planning a fresh electric configuration around a defined KV value. The Turbo 2.0 naming gives the motor a distinct place within the range, while the 1:10 scale reference keeps the application tied to model car use rather than full-size electronics. No batteries are included. The age marking is 14 Years. On the bench, this motor suits rebuilds, performance-focused maintenance and targeted drivetrain changes in electric model cars. It also works well as a search-friendly option for enthusiasts narrowing a setup by scale, motor type and 3200KV specification before matching the rest of the electronics separately.  Warning! Not suitable for children under 14 years.

RC brushless motors

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a compact power package to RC vehicle builds with a sensorless 3200 kV motor and an electronic speed controller matched to hobby-grade running. In the chassis, the black finned motor layout and separate controller create a clean drive setup for fast acceleration and direct throttle response. The motor delivers a no-load speed of 24,420 RPM and approx. 390 W short-term output, with 53 A continuous current for sustained running. Its dimensions of 35.8 x 50 mm and a shaft diameter of 3.175 mm provide concrete fitting data for compatible installations, while the motor weight of 148 g and ESC weight of 80 g help when planning the balance of a 1:10 model. The controller is designed for 7.4 V operation and works with 2S LiPo or 6-cell NiMH battery packs. Forward, brake and reverse functions are built into the ESC, and the T-Plug connector forms part of the power connection. This set suits RC car projects that need a coordinated motor and controller combination rather than separate component sourcing. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a matched drive upgrade to electric RC models with a 2000 kV sensorless motor and a 60 A electronic speed controller. This 2-part combination is built for hobby setups that need clear throttle delivery, compact installation and a defined power package in one box. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, making it a concrete fit option for many 1:10 chassis layouts where motor space and shaft size matter during planning. Its no-load speed reaches 15,170 RPM, while short-term output is rated at approx. 236 W for lively response when the drivetrain comes under load. The ESC adds 80 g, handles 60 A continuously and up to 360 A peak, and manages forward, brake and reverse functions through a sensorless brushless system. Power supply compatibility covers 2S LiPo and 6-cell NiMH packs, with a T-Plug connector already specified. This set suits rebuilds, replacement projects and performance-focused electronics swaps in 1:10 electric vehicles. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions, giving model-building enthusiasts a clearly defined basis for a fresh drive configuration.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, motor, 2600KV

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 2600KV is a brushless drive component for electric model vehicle setups, centered on a 2600KV motor specification and a format matched to 1:10 applications. As a dedicated replacement or upgrade part, it brings the drive system back into service with a clearly defined motor unit for workshop benches, rebuilds and running repairs. Within a powered vehicle setup, the motor sits at the heart of the drivetrain, making the KV rating a key reference point when matching the unit to the existing electronics and the intended running character. The product data identifies this version specifically as the Dragster Turbo 2.0 motor, which keeps the designation clear when replacing a worn unit or sourcing the correct spare for an existing model. Because this is a component rather than a complete vehicle, the focus stays on fit within an electric model system and on the practical value of having the correct motor type ready for maintenance. The 14 Years age marking is stated in the product data. On the workbench, this kind of motor suits planned repairs, drive refreshes and parts-led tuning sessions where a named 1:10 brushless unit is the required starting point for getting a model back on track.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 Torque Beast, RC car, 2.4 GHz RTR

€129.99

The 1:10 Torque Beast brings classic monster truck presence to RC driving with a 430 mm length, 310 mm width and 200 mm height that give the chassis a broad, purposeful footprint on rough ground. A solid bumper with integrated LED lighting adds a bright front-end detail, while water-resistant RC components and splash-proof electronics support running when the surface turns damp or dusty. At 1364 g, the model combines its size with a manageable overall weight that suits quick direction changes and repeated runs. The 7.4 V 1500 mAh Li-Ion drive battery is included, and the stated running time reaches 25 minutes before the pack heads back to the USB charger. The fully assembled RTR format keeps the focus on driving rather than setup, and the 2.4 GHz system supports stable control without the frequency crystals older RC systems required. Minimum age: 14 years. On gravel paths, compact dirt sections or uneven yard surfaces, the Torque Beast has the ground clearance and tire format to keep the run lively without losing control. Evening sessions gain extra character from the front LED lighting, and the included battery set means the truck is equipped for the first outing straight away.

RC tires & rims

1:10 Wheel Set XL, RC wheels, 4WD 12 mm hex

€34.49

Large-diameter wheels can change both the look and the handling of an RC build, and this 1:10 4WD wheel set XL does exactly that with 4 complete wheels in black and white. The 105 mm diameter and 65 mm width create a noticeably larger footprint that suits rougher ground and gives the chassis a more assertive visual presence. Inside each tyre, foam inserts are matched to the construction so the rubber is supported under load instead of folding over or rolling at speed. That internal support helps the tread stay more stable through acceleration, direction changes and uneven sections, which can make the model feel calmer and more predictable in motion. The set is built around 12 mm hex mounting, a widely used format that allows straightforward installation on matching wheel hubs. Compatibility is stated for Tamiya hex mounts, making the set a practical option for many established 1:10 4WD platforms. On loose surfaces such as sand or grass, the XL dimensions can help the model carry momentum with a broader contact area. On firmer ground, the same wheel size gives the chassis a fuller, more aggressive stance that changes the overall character of the build without altering the core layout.

RC Crawler

1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR

€249.99

The 1:10 X-Crawlee Pro 3.0 brings crawler driving into a 43.5 cm format built for rough ground, with a 270 mm width, 235 mm height and a weight of 2280 g that gives the model a planted stance on the trail. Its 100% RTR setup puts the focus on driving from the first session, while the 2.4 GHz remote control system keeps control inputs clear and direct. Power comes from the included 7.2 V NiMH drive battery with 1800 mAh, charged via the included 7.2 V / 1 A USB charger. At full capacity, driving time reaches up to 70 minutes, giving longer runs across stones, dirt tracks and uneven paths without frequent charging breaks. The controller is compatible with NiMH and LiPo batteries, which broadens battery choice for later setup changes. Full ball bearings support efficient running through the drivetrain, while the suspended rigid axles give the crawler the axle movement needed for slow, technical sections. The ready-to-run set includes the model, the radio system, the drive battery, the USB charger, 4 AA transmitter batteries and the manual. With a 14 years+ age marking and a single-vehicle setup, the X-Crawlee Pro 3.0 suits focused crawling sessions where line choice, throttle control and steering precision shape every climb.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 4WD 100% RTR

€199.99

The 1:10 XS Tekuro brings fast off-road driving into a 410 x 300 x 175 mm format with permanent 4WD, a high-torque 550 brushed motor and a top speed of up to 40 km/h. Grey and green bodywork, 110 mm monster tyres and a raised stance give the model a strong trail-ready presence before the first run even starts. Its drivetrain is built around a central steel cardan shaft, reinforced steel drive shafts at the front and rear, and metal differentials with steel bevel gears on both axles. Ball-bearing mounting throughout supports efficient running, while the XT60 high-voltage plug system and quick-change battery holder simplify battery swaps between sessions. The 8 kg steering servo uses a metal gearbox and water-protected construction, matched with splash-protected electronics and a water-protected 2.4 GHz radio system. The included 2600 mAh 7.4 V Li-Ion battery supports about 15 minutes of driving time, and the complete RTR setup keeps preparation focused on charging and heading out. At 1741 g, the chassis has the planted feel needed for dirt paths, gravel sections and uneven ground. Tight turns, short bursts of acceleration and repeated launch attempts all suit the Tekuro's mix of traction, suspension travel and wheelie-ready rear setup.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 2-Axle Boxed Trailer, model kit

€589.99

A 2-axle box trailer is a familiar sight in road freight, built to carry cargo in a closed body while keeping the load protected on the move. This 1:14 model kit brings that transport format into a detailed build with a laser-cut steel frame, a box body with CNC-milled aluminum parts, and the long, clean proportions of an enclosed trailer behind a tractor unit. The chassis uses 3 mm and 1 mm steel, while the bogie is formed from sheet steel in a sandwich structure. Wide chromated wheels run on ball bearings and carry wide tyres, and steel underride protection sits on the left and right sides. At the rear, an 8 mm aluminum bumper adds another machined metal detail, and a 1:14 trailer splash guard completes the lower section. The body measures 545 mm in length, 195 mm in width, and 290 mm in height, with a total weight of 4,800 g. Assembly is required, with a stated assembly time of 600 minutes. In use, the rear loading door opens on aluminum hinges through 270°, and magnets handle the door locking. Coupled behind a suitable 1:14 tractor unit, the enclosed body suits scale logistics scenes, articulated truck displays, and workshop builds that focus on metal construction, moving parts, and realistic trailer proportions. The kit includes instructions.

Models & trailers

1:14 2-Axle Dump Semi-Trailer, trailer

€589.99

Built in 1:14 scale, this 2-axle dump semi-trailer brings the look of a full-size tipper into a model-building format with a rigid PVC body, a CNC-milled aluminum frame and a 4-wheel layout. The silver dump body, black chassis and raised front platform create the working profile of a road-going bulk trailer, whether coupled to a tractor unit or parked on its support legs. The assembly kit focuses on mechanical detail rather than simplified styling. Vertical body panel lines, mudguards, rear underrun protection and ladder elements give the trailer a technical finish, while the king pin can be adjusted to suit the setup. The chassis uses new axles with 8 mm lift, and the rear section is shaped around a mechanically unlocking tailgate for realistic unloading action when a tipping function is installed separately. 7-chamber taillights and dummy air spring details extend the scale appearance across the rear and underside, and the ball-bearing wheel setup supports smooth movement during handling. On a workshop shelf, in a truck yard scene or behind a matching 1:14 tractor, the semi-trailer adds a strong construction-transport theme with visible engineering throughout the frame and body. Assembly kit and manual are included. A spindle drive, motor, battery, switch, radio gear, a charger and paints are required separately for expanded functions and finishing.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-Axle Dump Trailer, trailer kit

€519.99

The 1:14 2-Axle Dump Trailer brings working tipper style into a scale truck setup with a tandem-axle layout, a gray rigid PVC dump body and a steel profile frame with laser-cut, laser-welded construction. Built as an assembly kit, it focuses on the mechanical character of a real dump trailer, from the drawbar and support leg to the rear gate area and underbody linkage. The chassis uses 8 ball bearings across the wheel setup, giving the running gear a more precise feel as the trailer rolls behind a compatible tractor unit. Fulda Variotonn wide offroad tyres and the trailer axle with air ride dummy push the model further toward commercial-vehicle realism, while the 7-section tail lights add a recognisable rear-end detail. The automatic back wall locking with 2-hook design gives the rear section a functional finish that matches the tipper concept. The support leg keeps the trailer upright when detached, and the drawbar with hitch eyelet completes the classic central-axle trailer layout seen in heavy haulage scenes. On the bench, the kit offers a focused build around frame, axle and body assembly. Once finished, the trailer suits construction, transport and unloading scenes in 1:14 scale layouts, whether parked as a standalone model or coupled into a larger truck combination. Age 14 Years. Spindle drive, gear box motor, a control switch and paints are required separately.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-Axle Material Trailer, trailer kit

€574.99

Built for 1:14 truck scenes, the 2-Axle Material Trailer brings a long loading bed, twin-axle layout and working drop-side bodywork into a scale transport build with a clear commercial look. The grey panel sides, dark front bulkhead and wood-look floor give the trailer the character of a real material hauler, whether it is coupled behind a road tractor or parked at a loading point. The kit structure goes beyond a simple rolling chassis. The assembly sequence includes 2 axle units, a pivoted bogie, a main frame with crossmembers, mudguards, underride protection, rear bumper parts and upright posts around the bed. Ball bearings are fitted into each wheel hub, and the axle geometry offers normal height or a +8 mm position during assembly. Rear light housings are part of the build, and the manual also shows optional LED taillight boards as separate accessories. A spare wheel holder and additional fittings are listed as optional accessories rather than included contents. Once assembled, the trailer suits realistic loading and transport layouts in 1:14 scale, from building-material scenes to depot and yard setups. The opening side panels and rear section support a more active display style, while the detailed underframe, mudflaps and side protection parts give the finished trailer convincing presence from low viewing angles.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-axle Riedler, stanchion trailer

€509.99

The 1:14 2-axle Riedler stanchion trailer brings timber-haul detail into a scale transport setup with a steel sandwich frame, solid aluminium stanchions and a long, purposeful silhouette. At 620 x 190 x 305 mm and 2,600 g, the trailer adds real presence to a model road train while reflecting the look of the full-size Riedler vehicle named in the licence. Its mainframe uses 3 mm and 1 mm sheet steel parts that are laser cut and CNC bent, and the bogie follows the same sandwich construction for a consistent mechanical layout. The mounted bogie is adjustable and uses sliding pads to support manoeuvring through tighter course sections. A one-piece drawbar in fibre-reinforced plastic carries a chequer plate application and is held at a coupling height of 75 mm by 2 springs. The semitrailer axle includes dummy pneumatic springs, while the left and right underride guards and the CNC-milled rear bumper add further metal detail. The stanchion holders can be loosened with 2 grub screws, then repositioned or removed to suit different loading arrangements for logs or other long cargo. Ball-bearing mounted chromium wheels with wide tyres, mudguard splash protection, bumper mud flaps, a licence plate holder and 7-compartment rear lights build up the finished transport character. A decoration set is included. Age 14 Years. The Carson towing coupling 500907182 is required separately for use on the TAMIYA Volvo FH16 tractor unit.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 20Ft. Sea-Container, kit, trailer load

€199.99

Freight containers shaped modern transport with a standardised form built for road, rail and port handling. This 1:14 20Ft. Sea-Container Kit brings that familiar cargo silhouette into a scale truck setup with a 432 mm length, 180 mm width and 185 mm height. The structure combines an anodised silver aluminium frame with plastic sheet body sections that reproduce the look of a traditional container. Corrugated surfaces, corner details and the separate frame layout give the model the character of a working freight load rather than a plain box shape. The plastic panels are paintable, which supports custom liveries, fleet styling or a weathered finish that matches a chosen tractor unit and trailer combination. At the rear, the doors are movable and fitted with a locking mechanism, so the handling detail is part of the build rather than only a visual effect. The container is designed for the 2 axle container semi-trailer 500907334 and locks to the chassis via twist-locks. That mounting method reflects the technical logic of full-size container transport and helps the model sit naturally in logistics, harbour or long-haul display scenes. 14 Years marks the recommended age.

Models & trailers

1:14 20Ft. Semitrailer, trailer kit, tandem axle

€274.99

Built around a 1:14 scale layout, the 20Ft. Semitrailer kit brings container transport style into a detailed truck setup with a black anodised aluminium frame and a compact tandem-axle format. The 475 mm long chassis creates a clear, purposeful silhouette behind a tractor unit, while the 180 mm width and 135 mm height keep the proportions aligned with scale road-haulage scenes. The running gear combines swing axle suspension with flat springs, giving the underframe a more technical, model-engineered character than a plain static trailer base. Tyres with foam inserts add substance to the wheel setup and support a fuller tyre shape on the rims. Mechanical seat posts strengthen the parked semitrailer look at the front section and add another visible chassis detail for display or workshop scenes. The open kit format also leaves room for a container-focused build concept rather than fixing the trailer to a single body style from the outset. Coupled to a matching truck, the semitrailer suits freight yard layouts, road transport displays and scale driving sessions built around container handling themes. A suitable lamp set, 300056502, is available for builders who want to extend the trailer with matching light equipment. Age 14 Years

Models & trailers

1:14 3-Axle Flatbed Trailer III, trailer

€539.99

Heavy transport takes shape in 1:14 scale with the 3-Axle Flatbed Trailer III, a detailed kit built to pair with TAMIYA tractors. The long platform, solid front wall and multi-axle layout give the model the look of a working road trailer ready for oversized loads, machinery or palletised cargo. The chassis uses a laser-cut steel frame in 3 mm and 1 mm material, supported by a massive aluminium front wall and steel underride protection on the left and right sides. A bumper made from 8 mm aluminium adds another strong visual and structural element at the rear. The loading area measures 981 mm in length, with an overall width of 195 mm and height of 210 mm, giving the trailer a notably long deck in this scale. At 4,400 g, the assembled model carries a substantial presence on display and in convoy scenes. The new trailer suspension can be built at normal height or with the included +8 mm elevation, adding flexibility to the finished stance. The real wood deck surface and recessed fastening points suit scale freight setups, from construction loads to industrial transport scenes. Ball-bearing wheels support smooth rolling movement, while the spare wheel mounted in its steel holder strengthens the authentic commercial-trailer look. Age 14+ marks the recommended age. The trailer can also be expanded with separately available accessories, including a conversion kit with functional aluminium side walls for building-material transport.

Models & trailers

1:14 3-Axle Fliegl Megarunner, trailer kit

€634.99

Curtain-side trailers shape the look of modern road freight, and the 1:14 3-Axle Fliegl Megarunner brings that transport character into a detailed model-building project. The assembly kit captures the long, low stance of a European semi-trailer with a 995 mm length, a 195 mm height and a red curtain body that stands out clearly beside the white front and rear sections. The build centres on a laser-cut steel frame, steel front wall and 3-axle layout, creating a technical structure with the layered detail that model-building enthusiasts look for in workshop sessions. Along the sides, the curtain body is tensioned with multiple fasteners, while the rear section uses opening doors with a 270° hinge layout for a more authentic trailer finish. Half-round mudguards, a single-arm steel spare wheel carrier and aluminium underride protection add the kind of hardware normally seen underneath full-size transport equipment. The rear bumper carries a laser-cut Fliegl logo, and the wide tyres with chromed rims complete the road-going stance with a bright contrast against the darker chassis parts. On a shelf, in a depot scene or coupled to a 1:14 tractor unit, the trailer adds a strong logistics presence through its triple-axle proportions and curtain-side bodywork. The kit format makes the construction itself part of the appeal, with the manual included for step-by-step assembly.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Low Loader, trailer, gooseneck

€849.99

Heavy-haul trailers are defined by their proportions, and this 1:14 3-axle low loader captures that look with a long low-bed platform, a stepped gooseneck front section and a rear triple-axle group. The red frame, wood-look centre deck and black running strips create the technical contrast seen on full-size transport equipment, whether the trailer is coupled to a matching tractor unit or shown as a standalone workshop build. The construction goes beyond a simple shell. The manual shows 6 wheel assemblies with ball bearings, a multi-part frame with cross members in 74 mm and 81 mm lengths, and deck sections that lock into place across the chassis. Rear details such as warning boards, mudflaps, lights, hazard markings and LONG VEHICLE graphics build the road-going character of the model. The trailer also supports optional upgrades including a spindle drive gearbox motor, a control switch for the lifting mechanism, LED tail light boards, rectangular lights and an orange flashing beacon. On a finished 1:14 truck combination, the low central bed suits scale transport scenes with construction machines, agricultural vehicles or other oversized loads. The long deck and realistic rear section also make the model a strong centrepiece for shelf display, depot layouts and heavy-transport dioramas. Required separately are a gearbox motor for the lifting device and a control switch for manual lifting.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Semi-Trailer Ver.III, trailer

€689.99

The 1:14 3-Axle Semi-Trailer Ver.III recreates the long, enclosed form of a box trailer with a white body, red chassis and a detailed 3-axle layout that gives a truck combination a convincing road-going presence. Extended support legs at the front let the trailer stand detached, while the wide rear opening sets up loading scenes with the doors swung fully outward. Details across the chassis and body focus on the hardware that defines a working trailer. The side panels use a screwed sandwich-look construction, and the semi-circular mudguards frame the rear wheel area with a clean commercial-vehicle profile. At the back, an aluminum rear bumper carries 7-section taillights for a technical finish that matches the transport theme. A steel spare wheel holder with spare wheel adds another workshop-style detail to the underframe, and the manually adjustable aluminum trailer support legs underline the functional character of the model. Combined with a compatible 1:14 tractor unit, the trailer suits realistic freight setups, depot scenes and road-train display builds. Open rear doors, visible cargo space and the multi-axle chassis also make it a strong centrepiece for transport layouts focused on loading bays, yard parking and long-haul combinations. Age 14 years+  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Stanchion Trailer, logging trailer

€599.99

Built around a 1:14 scale and a 3-axle layout, this stanchion trailer brings the look of a dedicated timber hauler into a detailed model format. The red chassis, silver stanchions and black fenders create the unmistakable profile of a forestry transport trailer, with the long frame set up to carry elongated loads such as logs or poles in a convincing road-going arrangement. The structure develops through a multi-stage build with 6 wheel assemblies, ball bearings in the wheel hubs and 3 axle units mounted beneath the frame. The suspension uses a new design, and the axle build includes a choice between normal height and a raised +8 mm position. Dummy air suspension details add another layer of scale realism around the running gear. Side underrun guards, a rear bumper, rear light details and a front holder with front plate shape the trailer into a complete heavy-transport subject rather than a simple rolling chassis. On the bench or coupled into a 1:14 truck setup, the trailer suits display scenes centered on forestry, construction or long-load transport. Support legs hold the trailer upright when parked, while the front bulkhead and paired stanchions define the loading zones clearly for a purposeful finished look.

RC truck accessories

1:14 3-Chamber Taillight PCB, RC lighting set

€80.99

Compact rear lighting adds a sharper scale finish to 1:14 vehicle builds, and this 3-chamber taillight PCB set brings that detail into a small round format. With dimensions of 11 x 7.5 mm, the units suit model bodies and rear sections where lighting needs to stay visually balanced instead of overpowering the build. The PCB layout combines 3 light functions in each taillight: rear light, indicator and brake light. That function mix supports more lifelike signalling on trucks, trailers and custom conversions, while the round housing shape fits classic rear-end styling on many commercial vehicle projects. The set is designed for an input voltage of 7.2-12 V DC, making it suitable for RC electrical systems within that range. For model-building enthusiasts, this adds a focused electronics upgrade that contributes visible function as well as scale character. Installed on a 1:14 rig, the taillights help complete the rear view during workshop builds, restoration-style projects or detailed road-going truck scenes. The set is not compatible with TAMIYA MFC-01/03, so it is best matched with other suitable lighting layouts and custom electronics setups.

Models & trailers

1:14 3Axle Trailer Chassis Ver.III, trailer

€389.99

The 1:14 3Axle Trailer Chassis Ver.III captures the look of a heavy road trailer in a format shaped for model-building enthusiasts. Its laser-cut steel construction uses 3 mm and 1 mm sections, creating a rigid base chassis that suits custom builds and gives larger trailer bodies a defined structural foundation. The 3-axle layout brings the long proportions of a transport trailer into a scale setup that looks convincing behind a truck tractor. A new trailer suspension system is part of the chassis design, and the included +8 mm elevation option allows the running height to be adapted to the planned structure above. Wide chromed wheels with ball bearings and wide tyres underline the technical look while supporting smooth rolling movement. At the rear, an aluminium bumper with 7-section taillights adds another recognisable truck detail. The steel spare wheel holder with spare wheel extends the workshop-style equipment, while the semi-circular mudguards shape the wheel area with a clean trailer silhouette. As a basic trailer chassis for individual structures, this version leaves room for flatbed, transport or specialist body concepts built around the frame. On a shelf, in a workshop setting or coupled to a matching 1:14 tractor unit, the long red chassis and detailed under-run protection create a strong heavy-haul presence.

RC truck accessories

1:14 4-in-1 LED Distrib.Board, model accessory

€9.99

Lighting details often define the final character of a scale build, and this 1:14 4-in-1 LED Distrib.Board is made to bring order to that stage of the setup. With 10 outputs on one board, it creates a central connection point for several LED positions within a 1:14 model and supports a tidier internal layout than separate loose branches. The board is designed as a model accessory in the Carson Modelsport range and focuses on the practical side of adding electronics to a build. Its 4-in-1 distribution concept helps separate and organise multiple light connections when a cab, body or chassis carries more than one lighting point. That makes it useful for projects where front, rear or additional marker lights need a defined place in the wiring plan. The compact board format also suits hobby work where available installation space inside a scale model is limited and every connection needs a clear route. In workshop use, the board fits naturally into the finishing phase of a 1:14 build or an upgrade of an existing model. Minimum age 14 years is stated for this accessory, matching hobby projects that combine scale detailing with electronic equipment.

Additional accessories

1:14 Box Body Conversion Kit, model kit

€399.99

This 1:14 box body conversion kit reshapes the TAMIYA Volvo FH16 timber truck 300056360 into an articulated truck with a closed cargo body. CNC-milled aluminium parts form the main box structure, while the combination of metal sections and panelled surfaces gives the finished build a purposeful commercial-truck character. A sheet steel subframe, laser cut and CNC bent, is included for mounting on the chassis and creates the structural link between the conversion and the base vehicle. The side sections use screwed plastic panels in a sandwich layout, which adds visible layering to the bodywork instead of a plain flat-sided shell. At the rear, the loading doors are carried on aluminium hinges with a 270° opening angle, allowing the opening mechanism to be shown clearly on the completed model. Magnetic locking keeps the doors closed when the body is in running or display condition. The assembled body measures 545 x 195 x 195 mm and weighs 3,200 g. As a model kit, this conversion suits hobby builds that focus on reworking an existing truck into a different transport configuration. The box body changes the visual character of the Volvo FH16 from timber hauler to enclosed freight carrier and adds a substantial new body section for workshop assembly and finishing.

RC truck accessories

1:14 Chrome Bumper MB 1838/1850, truck part

€12.49

Classic truck styling often comes down to the front details, and this 1:14 Chrome Bumper MB 1838/1850 adds a bright plated accent to compatible model builds. Designed as an accessory for Mercedes Benz truck models 56305 and 56307 from Tamiya, it brings the specified MB 1838/1850 look to the front section in a format matched to 1:14 scale projects. The bumper is made from chromed material and focuses on exterior appearance rather than a generic replacement look. Its shaped front profile and integrated mounting points are intended for the named compatible truck models, which keeps the fitment use clearly defined in the product data. The included fixing hardware consists of 2 black screws, giving the set the essential parts needed for installation. As a model accessory in the Models Supplies range, it suits detail-focused truck projects where the front end finish plays a visible role in the overall build. On a workshop bench, the plated surface adds contrast against painted cab parts and darker chassis components. In a display setting or as part of an active RC truck build, the bumper helps complete the characteristic road-truck appearance associated with the MB 1838/1850 designation.

RC chassis & attachments

1:14 Clearance Lights, model accessory, 2 pcs

€11.49

Marker lights are a small detail with a big visual role on scale trucks, and this 1:14 clearance light set brings that road-going look into a model build with red and amber lenses. The set contains 2 pieces and is listed as a model accessory for hobby use. Its compact format suits detailing work where edge markers help define the outline of a cab, body or trailer in scale form. The red and amber colour combination follows the stated design and creates a clearer visual break between body panels and fitted trim. As a separate accessory, the set can support a fresh build, a repair, or the replacement of existing marker parts where the original look needs to be restored. The 1:14 scale keeps the proportions aligned with matching model projects rather than forcing an oversized lighting detail into the build. On the bench, the set fits naturally into finishing stages where small exterior parts shape the final appearance. In display use, the coloured markers add another layer of realism to trucks and trailers that rely on visible body details rather than large mechanical changes alone.

RC truck accessories

1:14 Clearance Lights, model accessory, 2pcs

€11.49

Marker lights are a small detail with a strong effect on the finished look of a scale vehicle, and this 1:14 clearance light set brings that effect into model builds with a red and white 2-piece layout. The compact format suits focused detailing work on truck and trailer bodies where visible light points help define the lines of the model. The set is listed as a model accessory and is aimed at hobbyists from 14 years. Red and white light elements open up classic placement options on body edges, upper sections or rearward areas, depending on the build concept and the styling of the vehicle. Because the pack contains 2 pieces, the set works well for selective upgrades rather than broad full-body outfitting. That makes it a useful choice for custom projects, replacement work or finishing touches on a scale body that still needs clearly placed marker-light details. On the workbench, the accessory can be integrated into truck, trailer or other 1:14 modelling projects where small exterior parts shape the overall impression. In display use or during driving sessions, the added light housings help the bodywork read with more scale definition and a more complete road-going look.

RC truck accessories

1:14 Day Running Light Actros 2/3 Axle

€65.99

The MB Actros remains one of the defining shapes in modern long-haul trucking, and this 1:14 daytime running light set brings that road-going character into a scale build with a model-specific front lighting detail. Made for MB Actros 2/3 Axle models, the set focuses on the visual signature at the front end and adds a cleaner, more technical look to the truck body. The accessory is designed as a paired lighting set with wired left and right units, matching the mirrored layout needed for the vehicle front. Its 7.2 to 12 V/DC input range gives clear electrical guidance for integration into compatible RC truck systems. The compact housings are shaped for installation as dedicated light components rather than as generic decoration, which makes the set especially relevant for builders refining the appearance of an existing model or replacing front lighting parts with the correct format. On a workshop bench, during a rebuild, or as part of a scale detailing session, this lighting set adds a focused upgrade to the MB Actros 2/3 Axle platform. It suits display-oriented finishing as well as active RC truck projects where the front-end layout matters as much as the driving setup.

RC truck accessories

1:14 Draw Tube Pole Trailer, model accessory

€89.99

This 1:14 Draw Tube Pole Trailer accessory set brings a functional trailer detail into model-building projects with a long cylindrical draw tube, a rectangular silver housing section and an angled mounting plate with 4 round holes and 2 elongated slots. The layout reads as a dedicated add-on for scale truck or trailer work, with each part focused on mounting, alignment and visible structure rather than decoration alone. Alongside the main tube section, the set includes 2 small silver detail parts, a black bracket and a bag of black and silver screws for the fitting work. The combination of slotted and round mounting points supports careful positioning during assembly, while the separate hardware keeps the installation tied to the mechanical character of the build. A red transparent 2-part light piece and a clear lens frame extend the set beyond the structural section, adding a realistic rear-end detail that complements the metallic-looking components. 14 Years is the stated age marking. On a workshop bench, the parts suit upgrade, replacement or custom trailer projects where a scale-correct extension section matters as much as the finished look. Assembly time is stated in minutes, and batteries are not included.

Models & trailers

1:14 Dump Trailer 2/3 Axle, model kit

€619.99

Built for model truck scenes with real working character, this 1:14 dump trailer model kit brings the look of a construction-site semi-trailer into a detailed three-axle format. The combination of a CNC-milled aluminium chassis, reinforced PVC basin and back wall, and a lightened licence plate mount gives the trailer a technical, workshop-style finish that suits display builds and active driving alike. The running gear uses GFK suspension with horizontal rods, 12 ball-bearings, 6 wide rims and 6 wide tyres with a width of 25 mm and an outer diameter of 82 mm. Air-spring dummies with screw springs add another layer of scale detail to the undercarriage, while plastic fenders with mounts frame the wheel setup cleanly. The aluminium underbody protection and the CNC-milled support construction continue the metal-focused build, and the mechanically adjustable trailer supports add a functional detail at standstill. With a length of 700 mm, width of 185 mm, height of 235 mm and a weight of 4,600 g, the trailer has substantial presence in a 1:14 truck setup. For unloading scenes, the basin can be equipped with a separately available dump mechanism. A spindle drive, motor, battery and switch are required separately. Once fitted, the raised basin and automatic rear locking create a convincing loading and unloading sequence for sand, gravel or stone in construction layouts, quarry scenes or truck meeting displays.

Models & trailers

1:14 Fliegl Stone Master, tipper trailer

€749.99

Current half-pipe tippers are defined by fast unloading and a hard-working silhouette, and the 1:14 Fliegl Stone Master brings that character into a detailed 3-axle trailer kit. The licensed model combines a steel chassis frame with a steel tipper body and rear wall, creating a substantial build with the long, purposeful proportions of a site trailer. The chassis uses laser-cut and laser-welded 1 mm and 3 mm steel parts, while the tipper and hatch door are formed from 2 mm steel with a CNC-bent profile. Across the running gear, 12 ball bearings sit inside the 6 wheel assemblies for smooth rolling action. The trailer suspension is detailed with air spring dummies, and the rear section carries a 7-section taillight layout, a licence plate bracket and a square steel rear underride guard. Semi-circular mudguards, a king pin, an ABS operating platform and a hydraulic cylinder dummy add further scale detail without crowding the lines of the body. The 7-section rear light cluster can be electrically retrofitted. With dimensions of 700 x 185 x 250 mm and a load figure of up to 10 kg, the trailer has the size and carrying capacity to suit construction layouts, transport scenes and scale hauling setups. The body can be tipped and unloaded with the separately required tipping mechanism. A spindle drive, motor, battery and switch are required separately.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 Goldhofer TU4, lowloader trailer, 4-axle

€694.99

Heavy-haul lowloaders are built to move machinery that sits too tall or too heavy for a standard trailer, and the Goldhofer TU4 captures that purpose in a long 1:14 scale platform with a distinctly low deck and 4-axle layout. This kit uses laser-cut steel sheet parts to create the frame and structure, giving the model a technical build with the look of a real transport trailer. The deck is finished with wood supports that break up the steel construction with a realistic loading surface, while 16 ball-bearing wheels add a dense multi-axle stance under the chassis. At the rear, the support can be adjusted manually, and the one-piece ramps connect through a hinged mechanism that allows different loading positions. The underframe includes spacers, semicircular fenders and a pivoting bogie arrangement, adding more mechanical detail during assembly than a simple display trailer. Decals are included for markings and finishing touches, so the completed model carries the visual character of a working lowloader rather than a plain platform. Coupled behind a matching 1:14 tractor unit, the trailer suits workshop display, transport dioramas and scale loading scenes with construction or agricultural vehicles. Age 14 Years. Assembly instructions are included.  Warning! Not suitable for children under 14 years.

RC truck accessories

1:14 Lift Axle, conversion kit, trailer upgrade

€99.99

A lift axle is a defining detail on many full-size trailers, and this 1:14 conversion kit brings that function into a scale workshop project for CARSON 3-axle trailers of the II and III generation. Built for one trailer axle with dummy air suspension, the set converts it into a working lift system with a clearly visible axle movement of about 6 mm. The mechanism is driven by a digital servo and uses an aluminum servo mount, an aluminum servo horn, new mounting brackets, air bellows and mounts, plus a steel lift mechanism to create the lifting action. Mounting hardware is included for the installation. A suitable servo with at least 10 kg torque is required separately; comparable dimensions are 40 x 20 x 38 mm. The kit is compatible with Fliegl Megarunner, Stake trailer III, Flatbed trailer III, Trailer chassis III, Building materials trailer III, Box trailer III, and all 2nd generation trailers. Installation in tipper models is not possible. On a finished trailer, the raised axle changes the stance in a way that looks closer to a working road-going combination. In the workshop phase, the conversion adds a focused mechanical upgrade that suits model-building enthusiasts who enjoy functional trailer details as much as the final appearance.

RC truck accessories

1:14 Metal Front Axle, model part, steering

€19.99

A front axle defines both the stance and the steering layout of a scale truck build, and this 1:14 metal front axle with steering linkage brings those two core elements together in one dedicated model part. The metal construction gives the assembly a clearly specified material base for workshop use, while the included linkage ties the axle directly to the steering function named in the designation. Within a 1:14 build, a front axle is more than a visual detail: it is the component group that shapes how the front end is assembled and how the steering hardware is organised. This version is supplied as a front axle with steering linkage rather than as an isolated single piece, which helps keep the relevant steering section together for replacement or planned parts work. The designation identifies it as a model supply within the models and accessories range, making it a focused choice for maintenance benches, rebuild projects or scale-oriented truck assemblies. The age marking is 14 Years. Whether the task is replacing a worn front-end assembly, preparing a fresh chassis project or refining a detailed 1:14 vehicle, this axle fits naturally into hands-on hobby work. It suits model-building enthusiasts who value clearly defined components and a steering assembly that is named upfront in the specification.

RC truck accessories

1:14 MFC-TLS IR Low Loader, control unit

€84.99

Built for 1:14 truck modelling, the MFC-TLS IR Low Loader control unit extends TAMIYA MFC-03/01 with infrared signal transfer to a matching trailer setup. The module sends lighting and auxiliary commands from the tractor unit to the trailer, creating a clean functional link for low loader combinations with steerable axles. Power is supplied via the receiver at 5-7.4 V/DC, so the module integrates into an existing radio-controlled electronics layout without a separate power source stated in the data. Rear light circuit boards for 3-chamber or 6-chamber taillights connect through screw terminals, and each of the 7 outputs supports loads of up to 500 mA. That layout also leaves room for additional lamps such as marker lights, roof lights or wind deflector lights, which are switched through the parking light function. The package contents include the MFC IR transmitter module, an IR transmitting diode and a 5-pin cable set. In a detailed truck and trailer build, the unit supports coordinated light behaviour and extra driven functions across the combination. The control paths also cover steering-related trailer functions, making it suitable for low loader setups where steerable axles add a more involved operating sequence. Recommended age: 14 years. The TLS low loader control unit 500907712 is optionally required for the trailer.

RC truck accessories

1:14 Scania 770 Roof Lights, model accessory

€16.49

The Scania 770 stands out on the road with its tall cab format and strong front-end presence, and this 1:14 roof light board brings that character into a scale truck build with a focused lighting detail. Designed as a model accessory, it places 5 LED roof lights across the upper cab area to create a more defined silhouette on the finished Scania 770. The one-piece board format groups the 5 lights into a single roof-mounted assembly, which helps keep the layout consistent across the cab line. As a 1:14 accessory, it is shaped for scale modelling work where body styling and truck-specific detailing matter as much as the main chassis. The LED configuration adds a technical accent to the upper section of the model and gives the roof area a clearer visual structure than an unadorned cab top. The Scania 770 reference keeps the styling tied to a named truck subject rather than a generic lighting add-on. On the bench, the light board fits naturally into a detailed truck project alongside cab finishing and exterior upgrades. In display use or during scale driving sessions, the 5-light arrangement gives the model a more distinctive roofline and a stronger long-haul truck character.

RC truck accessories

1:14 Scania 770S Front PCB, truck lighting

€189.99

Modern long-haul trucks rely on their front light signature as much as on grille shape, and the Scania 770S is one of the clearest examples of that design language. This 1:14 front PCB lighting set translates that look into a dedicated lamp assembly for the TAMIYA Scania 770S, combining reflector detailing with functional illumination for a more authentic scale finish. The set is built around 2 matching front light modules with integrated wiring and PCB-based electronics. Each housing contains 16 LEDs, arranged to reproduce the reflector structure with a more realistic visual depth than a plain lamp insert. The lighting functions include daytime running light and side position light, adding separate illuminated zones that sharpen the truck's front profile. The specified input range of 7.2 to 12 V DC suits RC truck electrical systems in this class and gives clear compatibility guidance for installation planning. Mounted on the model, the lamp units bring more definition to the front corners, whether the truck is standing in a workshop-style display or running on an indoor course. For 14 Years and up, this accessory adds a technical finishing step that suits hobby builds focused on scale detail and working light functions.

RC truck accessories

1:14 Scania 770S LED Board Side, model part

€31.99

This 1:14 side LED board set is made for Scania 770S model builds and brings a defined lighting component to the truck's side sections. With 2 matching boards in the set, the layout suits symmetrical installation and gives the model a more complete illuminated appearance. The designation names a 3A specification, adding a concrete electrical reference for integration into a compatible lighting setup. As a dedicated model accessory rather than a complete vehicle, the set focuses on one specific area of the build and supports more detailed finishing work on a Scania 770S project. The side board format helps separate this component from front or rear lighting elements and makes it easier to plan placement within a larger 1:14 truck configuration. In a workshop setting, the pair can be fitted during a fresh build or used to refine an existing Scania 770S model with added side illumination. The clearly defined scale and vehicle reference also make the set a focused choice for hobbyists working on truck detailing with matching 1:14 components.

RC truck accessories

1:14 Scania 770s LED Board, model accessory

€32.49

The Scania 770 S belongs to the latest generation of long-haul trucks, known for its bold front design and strong road presence. This 1:14 LED board is made for that look in model form, adding a defined lighting element to the front area of a Scania 770s build. The accessory is specified as a 4+3 front LED board, giving model-building enthusiasts a clear layout for cab detailing rather than a generic light part. In a 1:14 truck project, details at the grille and roofline shape the whole character of the finished replica, and this board focuses attention on that upper front section. The Scania 770s designation keeps the part tied to a specific subject, which matters when a build is planned around the lines and proportions of one truck model. As a model accessory rather than a complete vehicle, it suits hobby benches where selected parts are added step by step to develop a more individual finish. Whether the goal is a shelf display, a show-style truck replica, or a running 1:14 build with extra visual definition at the front, this LED board adds a distinct custom element. The compact format also makes it a useful choice for targeted upgrades where one visible detail can change the overall impression of the cab.

RC truck accessories

1:14 Scania 770S Positionlight Set, LED kit

€85.99

The Scania 770S is known for its bold front-end presence, and this 1:14 position light set translates that character into a dedicated LED upgrade for scale truck builds. With 21 LEDs and support for 7.2 V and 12 V systems, the set is aimed at model-building enthusiasts who want to add a more intricate lighting layout to a Scania 770S project. The wiring harnesses are arranged for several mounting points around the truck body, with light outputs assigned to roof lamps, side skirt position lights and multiple front lighting locations. Alongside the roof position lamps with high beam function, the set also covers 5 lightbar pods, a bumper lightbar and an auxiliary light in the radiator grille. This spreads the illumination across upper, central and lower sections of the cab, giving the model a more structured and realistic light distribution once installed. The prewired LED lines also support neat routing through a detailed truck build where cable placement matters as much as the finished effect. On a display shelf, in a workshop build, or during powered running sessions, the set adds visible definition to the Scania 770S bodywork and helps separate the truck's key styling zones through light placement. The set is not compatible with TAMIYA MFC-01/03.

RC truck accessories

1:14 Steel Drive Shaft 47-57 mm, model part

€17.49

A steel drive shaft in 1:14 scale format brings a core drivetrain component to compatible model vehicle builds. The stated 47-57 mm length range defines the working span clearly, making this part relevant wherever that exact distance is needed between connected drivetrain points. As a model accessory in the Models & Accessories range, this shaft is aimed at repair, replacement, or planned drivetrain setup work rather than decorative use. The steel construction places the focus on a metal transmission part for hobby applications, and the compact 47 mm to 57 mm specification gives a concrete reference when matching an existing assembly. With a minimum age marking of 14 years, the part sits in a hobby context shaped by model-building and technical maintenance. The designation itself keeps the function straightforward: drive shaft, steel construction, 1:14 scale reference, and a defined length window. On the workbench, this kind of spare part supports routine servicing of compatible RC models, whether an existing shaft is being replaced or a drivetrain layout is being completed with the required size. It also fits neatly into a stocked parts assortment for ongoing maintenance of 1:14 vehicle projects.

RC truck accessories

1:14 Steel Drive Shaft, model part, 40-45 mm

€17.49

This 1:14 steel drive shaft is a compact model part for driveline setups that need a stated length range of 40-45 mm. The steel construction and scale-specific designation give model-building enthusiasts a clear starting point for matching the part to an existing build or replacement task. Within a model workshop, a drive shaft sits at the heart of mechanical power transfer, linking rotating components in the drivetrain. Here, the key data stays focused and usable: 1:14 scale reference, steel material, and a 40-45 mm size range. That makes the part easy to place in projects where a short shaft section is required and where the dimensions need to be checked against the installed layout. The concise specification also suits spare-parts planning, because the material and size can be identified quickly without sorting through broader vehicle claims that the data does not state. Whether the task is replacing a worn shaft in a running model or selecting parts for a fresh chassis setup, this component brings the essential information into one straightforward format. The 40-45 mm range supports comparison against existing hardware, while the steel build keeps the focus on a concrete, named material for hobby use.

RC truck accessories

1:14 Steel Drive Shaft, model part, 75-100 mm

€17.49

This 1:14 steel drive shaft is a dedicated drivetrain part for model assemblies that need an adjustable connection length from 75 to 100 mm. The steel shaft brings a clear mechanical role into the build, linking compatible drivetrain points within that stated span and supporting a precise, component-led setup. In a 1:14 model context, the 75 to 100 mm format gives room for installations where the distance between connected parts is not fixed to a single length. That makes the shaft relevant for replacement work as well as for fresh assemblies built around matching dimensions. The steel construction keeps the focus on the part's intended function as a drivetrain link rather than a decorative add-on. With the age marking of 14 Years, the part sits in a hobby-focused model range shaped around detailed builds and technical component choices. Whether used to replace a worn drivetrain link or to complete a compatible 1:14 project, the shaft fits naturally into workshop-style model building sessions. It suits hobby benches where measured component selection, matching dimensions and drivetrain layout all matter to the finished assembly.

RC truck accessories

1:14 Steering Axle, truck accessory, steel

€99.99

In 1:14 truck building, the steering axle shapes how the whole front end responds on the road. This pre-assembled front axle combines a hardened steel center section, hardened steel steering knuckles and aluminum linkages into a ready-to-install unit for TAMIYA truck models. The axle body forms the core of the assembly, while double plain-bearing-mounted steering knuckles support precise steering movement at each side. A steel tie rod with left- and right-hand threads allows fine tracking adjustment directly at the linkage, which helps dial in the front end with more control during setup. Backlash-free M3 ball joints transfer the steering motion through the system with accurate, direct action. The combination of steel load-bearing parts and aluminum linkages gives the assembly a focused mechanical layout built around steering precision. Installed on compatible TAMIYA truck chassis, the axle suits fresh builds, rebuilds and targeted front-end upgrades where exact steering response matters. The ready-for-installation format also keeps workshop time focused on fitting and setup rather than on assembling the axle itself.

RC truck accessories

1:14 Strobe Light orange, model accessory, 2 pcs

€45.99

Amber warning lights are a familiar detail on working trucks, and this 1:14 strobe light set brings that look into a model build with 2 compact light units. Each housing measures 11.5 x 4.5 x 2.5 mm, giving the set a small footprint that suits scale installations where lighting needs to stay in proportion to the bodywork. The lights are designed for 7.2-12 V DC input and come as orange strobe units for model electrics in that voltage range. The image shows slim silver housings with attached wires, a layout that supports installation on body sections, roof areas or accessory bars where a separate warning-light detail is needed. Compatibility with the 500907633 beacon light bar set makes this set a focused extension for existing 1:14 truck lighting projects rather than a generic decoration. Used on a show truck, service vehicle or detailed working rig, the 2 strobe lights add a distinct visual accent that sharpens the scale appearance. In custom builds, restorations or lighting upgrades, the compact format leaves room for precise placement while the amber colour reinforces the look of real commercial vehicle warning equipment.

Basic accessories

1:14 Towing bar Low loader, model accessory

€26.99

This 1:14 towing bar for the Low loader adds a defined structural part to scale model work, with a black moulded form that follows an A-shaped layout and integrates reinforcing ribs across the frame. The geometry shown in the part itself points to a mechanical connection role, with 1 circular mounting eye on one end and 2 cylindrical mounting points on the other for placement in the intended assembly. As a dedicated model accessory in the Models & Accessories range, the part suits replacement work, maintenance tasks or the completion of an existing 1:14 Low loader setup. The ribbed structure gives the component its formed profile, while the open triangular shape keeps the connection points clearly accessible during fitting. For hobby projects where the correct shape matters, a scale-specific part like this helps keep the model configuration consistent with the intended layout. The 14 Years age marking places the towing bar in the hobby segment rather than in early-play ranges. It fits naturally into bench work focused on repair, parts management and scale vehicle upkeep, whether the aim is to replace a worn component or keep a matching spare ready for later use.

Basic accessories

1:14 Towing Bar Trailer, model accessory

€26.99

The 1:14 Towing Bar Trailer is a model accessory with a clear utility-focused shape for scale vehicle and trailer projects. Its black moulded form combines a long drawbar arm, a circular eyelet and a broad triangular centre panel, creating a part that reads immediately as a towing or linkage component within a larger assembly. The centre section carries a raised diamond-plate texture that gives the surface an industrial look suited to working vehicle scenes and technical model layouts. Along one side, small mounting tabs with holes add further fastening points, while the two extending arms end in compact connector joints for attachment within a compatible structure. This combination of eyelet, tabs and connector ends supports use as a linking, hinging or stabilising element, depending on the model setup described by the builder's own project. The 1:14 scale keeps the part aligned with matching scale builds where proportion matters. In workshop-style rebuilds, replacement jobs or custom trailer configurations, this accessory brings a distinct mechanical detail to the assembly. It suits hobby benches where individual components are selected for fit, function and scale appearance rather than as stand-alone display pieces.

Models & trailers

1:14 Trailer Chassis 20/40ft.Cont., trailer

€399.99

Built around a CNC-milled aluminium frame with a black anodised finish, this 1:14 Trailer Chassis 20/40ft.Cont. brings container transport into a detailed scale format with a long 915 mm silhouette and a purposeful commercial-vehicle look. The 190 mm width and 140 mm height give the chassis a low, stretched profile that sits naturally behind a matching tractor unit in workshop, display or driving scenes. The 3-axle layout is paired with swing axle suspension and flat springs, so the undercarriage carries visible mechanical depth as well as articulated movement. Wide-base tyres with foam inserts add body to the running gear, while chrome-plated rims sharpen the road-going finish. Mechanical seat posts extend the functional trailer character beyond surface styling, and the changeable container fastening allows the chassis to be set up for 20 ft or 40 ft container formats. Age marking: 14 years. Behind a tractor unit, the long frame and multi-axle arrangement create the look of a working freight combination with clear transport focus rather than a generic road trailer. The chassis suits model-building enthusiasts who enjoy realistic commercial vehicle themes, detailed underframe construction and scale scenes centred on loading, hauling and depot movement.

Basic accessories

1:14 Trailersus. 8mm Lift, trailer axle parts

€29.99

A 1:14 trailer model gains a more technical underbody look with this Trailersus. set and its 8 mm lift layout. Created for retrofitting existing trailer axles with dummy air springs, the set brings the suspension area closer to the visual character often sought in detailed truck and trailer builds. The package contains the necessary moulded parts and 2 air bellows for the conversion. It is intended for use with dummy air springs 500907069, while the metal parts and the assembly material are reused from the existing axle. That setup keeps the focus on the suspension components that change the appearance of the axle assembly, rather than replacing the complete axle hardware. The black moulded parts suit workshop-style builds, restoration projects, and scale trailer customisation where the axle zone is meant to look more complete. One set is required for each trailer axle, which helps when planning a single retrofit or equipping several axles on a longer trailer. The 14 Years marking is stated in the product data. In a display build or a running truck-and-trailer combination, the conversion adds a more model-focused finish to the area beneath the trailer body.

RC truck accessories

1:14 UNI-TLS IR, transmitter unit, low loader

€84.99

Heavy-haul trailer functions become far more precise with the 1:14 UNI-TLS IR transmitter unit, built to connect an existing lighting system to the CARSON TLS low-loader control setup. The module sends both lighting and auxiliary commands to the trailer via infrared, creating a clean control link for complex low-loader operation. Designed for third-party use, the unit expands a 1:14 electronics layout with a focused set of control options for articulated transport models. The infrared transmitting diode forms the signal bridge to the trailer control unit 500907712, which is required separately for trailer control. Alongside standard light commands, the system supports additional switching tasks for functions such as a gooseneck section, electric supports, ramp drive or steerable trailer axles. Operating voltage is 5-7.4 V DC, and power is supplied directly via the receiver. Scope of delivery includes the UNI transmitter module, IR transmitting diode, 10-pin cable set and instructions. In a workshop-style build or an active driving layout, the module suits model hauliers who want trailer lighting and moving low-loader functions to respond through one coordinated infrared link. It fits especially well into detailed truck and trailer combinations where realistic control of transport equipment matters as much as the tractor unit itself.

RC truck accessories

1:14 Warning Signs LED TLS, trailer accessory

€54.99

Heavy haulage details make the difference on a scale build, and these 1:14 warning signs bring that look into the trailer setup with illuminated red and white SMD LEDs. The set contains 4 warning signs ready to connect, adding a functional lighting element that suits low-loader scenes and transport-focused model layouts. The pre-wired power circuit board keeps the electrical side straightforward and is designed for direct connection to the TLS low-loader control unit 500907712. Installation uses the existing mounting points on the CARSON gooseneck low-bed trailer 500907700, which keeps the fit aligned with the intended trailer platform. Each sign measures 21 x 21 mm with a width of 71 mm, giving the assembly a compact scale presence. The extendable construction can be moved in or out by loosening the screws, so the sign position can be adapted to the width of the load. Mounted on a low-bed trailer, the illuminated signs add a convincing finishing touch to heavy transport combinations in workshop builds, display setups, and driving sessions. The 5 V/DC operating voltage matches the stated electrical specification for integration into the TLS system.

Tyres & rims

1:14 Wheel Wide Trailer Wheels, Chrome Rims

€26.49

Chrome truck rims are a classic detail on full-size road trailers, and this 1:14 wheel set brings that look into a scale build with a wide format made for trailer use. The set includes 2 wide trailer wheels with a chrome finish, giving compatible models a brighter, more defined wheel appearance on the axle. The wheel design is intended for CARSON-MODEL SPORT trailers and suits rebuilds, replacements or visual upgrades where the running gear needs a fresh matching look. Each rim is specified for use with 5 x 11 x 4 mm ball bearings, which gives the assembly a clear bearing standard for fitting and maintenance. The wide profile supports the visual character expected from scale transport trailers, while the chrome surface, vent openings and shaped hub area add mechanical detail that stands out on the undercarriage. As an accessory part rather than a complete vehicle, the set focuses on wheel appearance and fit within an existing trailer setup. Mounted on a scale trailer, the 2 matching rims suit workshop-style rebuilds, custom transport combinations and replacement jobs after regular running. In display scenes or on the road behind a truck tractor, the chrome finish gives the trailer axle area a more authentic heavy-duty look.

RC diggers

1:16 Volvo L260H, wheel loader, 100% RTR

€369.99

The Volvo L260H is one of the best-known wheel loaders on large construction sites, and this 1:16 RC version brings that machine character into a fully functional ready-to-run format. At 530 mm long, 204 mm wide and 212 mm high, the model carries the broad stance and working proportions of the original into a format that gives the bucket action real presence. The 4110 g wheel loader combines scale detail with a drivetrain built for active operation. A battery holder sits under the engine hood, keeping the 7.4 V 1500 mAh Li-Ion drive battery neatly integrated into the body. The detailed driver's cabin includes an opening door, adding another layer of realism to the exterior. Sound and light functions extend the machine feel during operation, while the true-to-original wheel loader tyres match the construction styling with a tread pattern suited to the model's working look. The radio system uses 2.4 GHz technology and 10 channels for precise command input across the loader's driving and function controls. Running time reaches 60 minutes, giving the model enough time for longer loading sequences, repeated manoeuvres and display-worthy driving sessions. On a floor, paving or a compacted play surface, the combination of scale dimensions, functional bucket action and machine-style steering creates a focused RC construction experience.  Warning! Not suitable for children under 14 years.

Mini RC cars

1:50 Nano City Crane Truck, RC truck, 2.4 GHz

Construction crane trucks bring compact utility engineering into motion, and this 1:50 Nano City Crane Truck translates that character into a radio-controlled format with a realistic crane truck appearance, a detailed driver's cab and LED lighting. At 135 mm long, 60 mm wide and 90 mm high, the model fits neatly into indoor driving spaces while still carrying the proportions and working look of a mobile crane vehicle. The interference-free 2.4 GHz remote control system supports precise handling across the truck's compact 146 g format, making short direction changes and careful positioning easy to manage. A 3.7 V Li-Ion drive battery with 500 mAh capacity powers travel times of up to 40 minutes, and the included USB charger keeps the rechargeable setup straightforward. The crane tower can be rotated manually through 360°, while the outriggers can be adjusted manually in both height and length to change the truck's stance for different scenes. That combination suits floor-based routes, desk-edge manoeuvres and small construction layouts where the truck can drive into place, extend its supports and turn the crane into position. With the ready-to-run model, remote control, battery, charger and instructions included, the set focuses on compact RC driving with a functional crane feature and a strong city-service look.

Mini RC cars

1:50 Nano City Garbage Truck, RC car, 2.4 GHz

Utility trucks are a familiar part of the city scene, and this 1:50 Nano City Garbage Truck brings that working-vehicle character into a compact radio-controlled format. At 135 mm long, 60 mm wide and 76 mm high, the model combines a small footprint with a clearly defined body shape and a detailed driver's cab. The ready-to-run set includes the model, a 2.4 GHz remote control, a Li-Ion drive battery rated at 3.7 V and 500 mAh, a USB charger and instructions. With a weight of 146 g, the truck stays light in hand and easy to place on the floor between runs. The 40 minute runtime supports longer driving sessions without frequent charging breaks, while the radio system keeps the control link focused on the vehicle during each manoeuvre. LED lighting adds another functional detail to the body, and the rubber tires support controlled movement with their non-slip contact patch. The compact scale suits indoor routes across hallways, living spaces or a cleared play area, where the truck can weave around furniture legs, follow improvised collection rounds or line up with other city-themed vehicles. Between runs, the true-to-original design and utility-truck proportions also give the model a neat display presence on a shelf or desk.

Mini RC cars

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

€17.99

The Lexus LX570 appears here as a compact 1:60 Nano Racer with radio-controlled handling and a body shape that carries the full-size SUV's presence into a format just 79 mm long. At 33 mm wide, 22 mm high and 25 g in weight, the model stays light and easy to place on tables, smooth floors or short indoor courses. The 2.4 GHz control system supports stable command input across a range of 15 m, while the handset combines driving control with a built-in charging connection. A 1.2 V 80 mAh NiMH drive battery is included, and the ready-to-run format means the main components are already in place for immediate use. The official Lexus licence anchors the styling in the real vehicle, giving the front end and overall proportions a recognisable road-going identity. Included contents are the ready-to-run model, remote control with charging connection, NiMH drive battery, screwdriver and instructions. With up to 10 minutes of driving time, the Nano Racer suits quick laps across a desk, short obstacle layouts or side-by-side sessions with other mini RC vehicles. The ability to operate up to 50 vehicles simultaneously also opens the door to compact group racing without the control system getting in each other's way.

Mini RC cars

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

€17.99

The Lexus LX570 appears here as a compact 1:60 Nano Racer with a licensed body shape, combining SUV styling with radio-controlled driving in a format that measures just 79 mm long, 33 mm wide and 22 mm high. At 25 g, the small chassis stays light in hand and easy to place on short indoor routes, from table-edge slaloms to quick floor runs around everyday obstacles. The set comes as a ready-to-run model with a 2.4 GHz remote control unit, a 1.2 V/80 mAh NiMH drive battery, a screwdriver and instructions. The controller includes a charging connection, so the vehicle can be charged directly through the handset rather than through a separate dock. That compact charging setup keeps the driving system together in one place and suits spontaneous sessions when only a small space is available. The 15 m range gives enough distance for controlled manoeuvres across rooms, while the radio system allows up to 50 vehicles to run simultaneously for club-style races or family competitions. Its small scale makes the Nano Racer easy to store between runs and simple to bring out for short RC sessions without a large driving area. On smooth indoor surfaces, the Lexus LX570 shape and mini dimensions create a neat balance of display appeal and active use, whether the focus is solo driving or lining up several cars for close-quarters racing.

RC buggys

1:8 Akuma Buggy, RC car, 4WD RTR pink

€399.99

The 1:8 Akuma Buggy brings 4WD traction, brushless power and a bold pink body shell into a ready-to-run off-road setup built for fast runs on dirt, gravel and uneven ground. With a length of 505 mm, a width of 365 mm, a height of 220 mm and a weight of 3909 g, the chassis carries the broad stance and substantial footprint that suit buggy driving beyond smooth surfaces. A 100A drag-style ESC for 4S operation works with the 2050 Kv 3-pole brushless motor, while the cooling fan and aluminum motor heatsink support the electronics during hard acceleration. Steering input is handled by a 20 kg waterproof servo with metal gears, and the adjustable aluminum steering plate adds another tuning point at the front end. The XT90 high-current connector system and quick-change battery mount with Velcro strap keep battery swaps straightforward between runs. Splash-proof electronics and a 3-position adjustable rear spoiler round out a layout aimed at outdoor use. The included Expert Charger Twin LiPo USB-C charges two 7.4 V LiPo batteries simultaneously at 2A each, matching the supplied 2 x 7.4 V 3800 mAh drive packs. A 10 minute ride time suits short, fast sessions on compact tracks, open gravel areas or backyard jumps, with the color-printed body keeping the Akuma look clear at speed. Age 14+  Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Akuma, body set, pink grey shell

€33.99

The Akuma name suits the sharp, competition-style shape of this 1:8 body set. Pink and grey graphics spread across the moulded shell and separate rear wing, giving the buggy a striking race-ready look while keeping the outer panels visually matched. The shell shows pronounced aerodynamic contours, vent-style moulded detailing and prepared mounting points that guide installation on the vehicle. Alongside the main body and wing, the set includes fastening parts shown for the assembly: body clips, screws, nuts and spacers. That combination makes this set a practical choice when an existing shell needs replacement or when a fresh exterior is planned for an Akuma build. The separate wing adds another defined element to the silhouette and carries the same visual language as the shell itself. In workshop use, the set supports a straightforward body refresh with coordinated parts instead of piecing together individual exterior components. Once mounted, the bold contrast of bright pink, grey, black and white stands out clearly during running sessions and gives the model a focused off-road racing character.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Climb/Dessert Warrior 3.0, wheel set

€40.99

The 1:8 Climb/Dessert Warrior 3.0 wheel set brings a fresh running setup to off-road RC sessions with 4 mounted wheels that combine black rims and knobby rubber tyres in one ready-to-fit package. The tread pattern is shaped for rough terrain, giving the model a more planted feel on dirt sections, gravel paths and broken ground where clean traction matters. Each wheel uses a black multi-spoke rim with a deep inner dish and reinforcing spoke structure visible from the rear. On the outer face, the beadlock-style look with small moulded bolt details gives the set a purposeful desert and off-road character that suits the Climb/Dessert Warrior 3.0 designation. The central hex-style hub opening supports a direct mechanical connection at the axle, so the wheel set is built around practical replacement use rather than display-only styling. As a 4-piece set, the wheels suit a full vehicle refresh after heavy running or a matched swap before the next session on loose surfaces. The mounted design keeps the focus on getting a 1:8 model back onto the track with a consistent look and tread pattern across all 4 corners.

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

€174.99

The 1:8 Rock Wilder RTR brings large-scale off-road driving into a 530 mm chassis with a 355 mm width and 220 mm height, giving the model a broad stance for rough terrain. Its yellow and red bodywork pairs with a type 550 brushed motor and a red anodized aluminum motor heat sink, combining strong drive output with a component setup shaped for sustained running. A quick-change battery mount shortens stops between packs, and the included 7.4 V 3000 mAh Li-Ion drive battery supplies up to 12 minutes of running time. At 2552 g, the model carries enough mass to feel planted as the suspension works across ruts, gravel and uneven ground. The solid impact-resistant front bumper takes the first contact in close running, while the 2.4 GHz radio system supports stable control without the channel conflicts common to older crystal-based sets. Age recommendation: 14 years and over. Loose dirt tracks, compacted paths and rough open ground all suit the Rock Wilder setup, especially where the long wheelbase and off-road tire format can work through changing grip levels. The ready-to-run package includes the remote control, drive battery, USB charger, 4× LR06 transmitter batteries and instructions, so the focus stays on charging the pack and heading out for the next run.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Virus Extreme, wheel set, 2 mounted wheels

€33.99

The Virus Extreme name points straight to rough-surface running, and this 1:8 wheel set supports that role with 2 mounted wheels built as complete assemblies. The black finish, multi-spoke rim design and pronounced off-road tread give the pair a focused look that suits a hard-driven RC setup on dirt and gravel. Because the rims and tyres are already combined, the set works as a straightforward replacement when existing running gear is worn or damaged. The deep block pattern is shaped for loose terrain, where the tread can key into the surface during acceleration and direction changes. The ready-built format also helps when keeping matching spares in the workshop, since both wheels share the same visual style and tread pattern. As a model supply for the Virus Extreme, the set concentrates on one practical job: restoring a consistent wheel and tyre setup with parts made for this series. On a buggy prepared for outdoor sessions, a fresh pair can be fitted before the next run on compacted earth, gravel paths or rough track sections. The set also suits routine maintenance between driving days, when a matching 2-wheel replacement keeps the model prepared for the next outing.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Wheel-Set KOD, wheel set, 17 mm hex

€40.99

Chunky tread blocks and a 1:8 format give this KOD wheel set a focused off-road setup for compatible RC vehicles. Designed for models with a 17 mm hex wheel hub, the 4-wheel set brings a direct way to refresh the running gear with a tread pattern built for loose and uneven ground. The mounted wheels combine black rims with rubber tyres shaped around an extreme stud profile. That profile gives the contact patch a more aggressive bite on dirt and rough tracks, while the rubber compound is specified for a very long service life. As a replacement set, the 4 matching wheels keep the vehicle on a consistent tread pattern at every corner, which matters when the chassis is working across mixed off-road surfaces. The 1:8 scale fit also makes the set relevant for a broad range of larger RC off-road platforms that use the stated hub format. In use, the wheel set suits track days on dusty ground, rough bashing areas and uneven outdoor terrain where a deeper tread pattern can make a clear difference. For model-building enthusiasts, it is a straightforward upgrade or spare set that keeps a compatible vehicle ready for the next run.

RC models in 1:87 scale

1:87 VW Beetle Wintersport, RC car, 2.4 GHz

€109.99

The VW Beetle became one of the most recognisable car shapes of the post-war era, and this 1:87 RC version brings that silhouette into a compact format with working control and winter travel character. The VW Beetle Wintersport pairs micro scale handling with a light blue body, roof rack cargo and ski-themed detailing that stands out on a layout, shelf or small driving course. Its fully proportional control gives measured steering and throttle response instead of simple on-off inputs, which suits careful manoeuvres through model scenery and narrow tabletop routes. The compact chassis works with a very small turning radius, so bends, bridge sections and tighter lane changes feel more natural in limited space. Front and rear LED lights add a clear visual cue during running, especially in dimmer room light or evening diorama scenes. Power comes from a 3.7 V 40 mAh Li-Ion drive battery, and the set includes a 2.4 GHz remote control system plus 4x AAA transmitter batteries for operation. Charging takes place through the transmitter in 45 minutes, making short pauses between runs easy to manage. The ready assembled format puts the focus on driving, collecting and integrating the Beetle into model railway settings, classic car displays or compact indoor RC sessions. Age 14+

RC models in 1:87 scale

1:87 VW T1 Samba, RC car, surfboard RTR

€104.99

The Volkswagen T1 became one of the most recognisable vans of the post-war era, and this 1:87 VW T1 Samba brings that silhouette into a compact RC format with a surfboard detail and licensed Volkswagen styling. At 50 mm long, 21 mm wide and 19 mm high, the miniature format suits controlled runs on a desk, table or small indoor course where tight manoeuvres matter. The body combines detailed shaping with light blue and white paintwork, giving the Samba look a crisp period character in H0 scale. A weight of 15 g keeps the model light in hand and easy to place on narrow driving lines. The permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time, and charging takes place via the transmitter. The 100% RTR set also includes 4x AAA transmitter batteries and a storage case, so the model is ready for compact RC sessions straight away. Whether used for careful slalom runs between small obstacles or short laps across a tabletop layout, the miniature size and radio control create a focused driving setup in limited space. Age recommendation: 14 years and over.

RC electric motors & controllers

540 Pro 13T-BB, electric motor, 6 V RC drive

€18.99

The 540 Pro 13T-BB electric motor is a brushed RC drive unit built for model vehicle projects that need a clearly defined performance setup. With 13 turns, a nominal voltage of 6 V and an operating range from 4.8 to 8.4 V, it fits tuning, replacement and workshop builds where the electrical data matters as much as the fit. The attached cable adds a practical connection detail straight from the pack. Its technical profile centres on 32,000 rpm, 35 N mm torque, 99 W output and 5.3 amps current consumption. That combination suits hobbyists comparing drive characteristics across compatible RC electronics rather than choosing by size alone. The 540 can format is a familiar reference point in many model vehicle platforms, and the BB designation marks this version as a ball bearing motor. For workshop planning, the stated voltage window helps match the motor to an existing setup without guesswork. In use, this motor suits replacement jobs on worn brushed drives, fresh tuning builds and spare-parts boxes for regular track or car park sessions. The compact 540 format and included cable keep the focus on fitting the motor into a compatible RC chassis and getting the drivetrain back into action.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 17T-BB, electric motor, 6 V brushed

€18.99

The 540 Pro 17T-BB electric motor brings classic brushed drive character to RC vehicle builds with a 540 size format, 17 turns and a measured output of 69 W. At 24,500 rpm, the motor delivers a lively power curve that suits hobby setups looking for a defined balance of speed and control rather than an undefined all-round unit. Its nominal voltage is 6 V, while the stated operating range of 4.8 to 8.4 V leaves room for different electronics configurations within the same build plan. Current consumption is listed at 3.5 amps, and the 32 N mm torque figure gives a concrete reference for how the motor translates electrical input into rotational force at the shaft. The BB designation points to ball bearing support, a detail valued in model-building circles for smooth running in a compact drive component. Included cable simplifies the connection step and keeps the motor ready for fitting into a compatible RC chassis. With an age marking of 14 years, this motor fits enthusiast-oriented RC projects where component choice shapes the final driving character. It works well in workshop-style upgrade sessions, replacement builds or fresh vehicle assemblies where a 540 brushed motor with 17 turns is the required drive unit.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 21T-BB, electric motor, 6 V 60 W

€18.99

The 540 Pro 21T-BB electric motor brings classic brushed drive technology to RC model builds in a compact 540 size format. With 21 turns, a 6 V nominal voltage and a stated output of 60 W, it gives hobby projects a clearly defined motor option for drivetrain installations where size, power and electrical data all need to line up. Its operating range spans 4.8 to 8.4 V, making the motor suitable for different compatible power configurations within that window. The stated speed of 19,000 rpm and current consumption of 2.7 amps provide concrete figures for planning the drive package around the motor's characteristics. A torque rating of 30 N mm adds another useful reference point when matching the motor to gearing, transmission parts and the intended running style of the model. The included cable supports straightforward integration into the vehicle's electrical layout. In workshop use, this motor suits enthusiasts comparing voltage, rpm, torque and turns before choosing a brushed setup for a compatible RC vehicle. It also works well as a replacement or upgrade path when an existing 540 format installation calls for a motor with clearly specified electrical and performance values.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

6K Reflex Stick Pro 4 WP Receiver, RC receiver

€42.99

The 6K Reflex Stick Pro 4 WP Receiver brings compact radio control hardware to RC vehicles and boats that need dependable 2.4 GHz signal handling in a small format. With 6 channels in a waterproof housing, this receiver supports steering, throttle and additional functions while fitting into installations where space is limited. Its housing measures 46 x 28 x 17 mm and the unit weighs 13 g, so the receiver can be positioned in many chassis layouts without taking up much room. As a replacement receiver, it is made to work with the FS 6K Reflex Stick Pro 4 and the FS 6K Reflex Stick Pro 4 LCD remote controls named in the product data. The 2.4 GHz frequency range supports stable command transmission for models that rely on precise radio response. The 6-channel layout also leaves room for more complex function control than a basic 2-channel setup. In a trail truck, work vehicle, boat or other RC build with several switchable functions, the receiver supports a tidy electronics layout and clear channel allocation. Age 14 Years+

NiMH batteries

7.2V 2500mAh NiMH Race Battery, RC battery

€22.99

Built for RC vehicles and broader model building use, this 7.2 V NiMH race battery combines a 2500 mAh capacity with a Tamiya connector system in a format that fits established hobby setups. The nickel-metal hydride pack is designed as a rechargeable power source for compatible models, making it a practical choice where repeated driving sessions and regular charging cycles are part of the routine. Its specification focuses on the demands of active RC use. A maximum charging current of 2.5 A allows the pack to be charged within the stated limit, while the high current discharge characteristic supports applications that draw stronger power under load. That combination suits a wide range of electric model uses, from vehicle platforms to other model building applications that rely on a 7.2 V battery with this connector format. The pack format with bundled cells, power leads and plug connection follows the familiar layout used across many hobby systems. In use, the battery slots naturally into workshop preparation, replacement planning and regular running sessions with compatible RC models. Age marking: 14 years. Whether kept as a spare pack for longer track time or used as the main power source in a compatible chassis, it brings clear, stated electrical data to the setup.

LiPo batteries

7.4V 4500mAh LiPo Classic-Size, RC battery

€36.99

Built for classic RC layouts, this 2S LiPo battery brings 7.4V output, 4500mAh capacity and a 60C discharge rate into a Classic-Size format that matches the footprint of conventional NiCd and NiMH packs. In a 1:10 chassis with a standard battery slot, the 134 x 45 x 24 mm housing drops into the familiar space while delivering the response and consistency expected from modern LiPo power. The pack uses a Deans plug connector for the main connection and an XHP balancer connection for cell balancing during charging. Its 223 g weight places a substantial energy reserve into a format that remains suitable for common vintage RC cars. The 2-cell configuration supplies 7.4 volts, making it a direct fit for setups designed around this voltage class. The 4500mAh rating extends running potential beyond smaller packs, while the 60C specification supports current demand when acceleration loads rise. Age marking: 14 years and over. This battery suits restoration projects, regular track sessions and classic touring car builds that use a standard battery compartment. It also works well where older chassis dimensions matter, but modern LiPo chemistry is preferred over legacy pack formats.  Warning! Not suitable for children under 14 years.

Li-ion batteries

7.4V 600mAh LiION Battery, replacement battery

€13.99

This replacement battery is specified as a 7.4 V, 600 mAh LiION pack with a Sea Ray JST-3 connector, making it a clearly defined power component for compatible Carson RC Sport vehicle setups. The stated voltage, capacity and plug format give model-building enthusiasts concrete matching points when replacing a worn pack or adding another battery for continued use. As a spare power pack, it focuses on the essentials that matter in an electric RC setup: the 7.4 V rating for the intended system, 600 mAh capacity, and the named Sea Ray JST-3 connection standard. That combination helps narrow compatibility within the relevant vehicle range and keeps the choice grounded in actual technical data rather than approximation. Because the battery is sold as a replacement battery, the role is straightforward: it substitutes for an existing pack with the same specification in suitable models. In practice, this suits workshop shelves, pit boxes and home charging routines where a correctly matched battery is kept ready for the next run. For compatible RC vehicles that use a 7.4 V LiION pack with Sea Ray JST-3 connection, it adds a direct replacement option built around the exact figures given in the product data.

Axles & drive shafts

Akuma Alu-hex Hub 17 mm RC Wheel Adapter

€12.79

The Akuma Alu-hex hub 17 mm is a compact RC spare part set for wheel mounting and running gear service on compatible Akuma model vehicles. With 2 machined aluminium hub pieces, 2 matching nuts, 2 metal pins and 2 black set screws, the set brings together the fastening hardware needed for a complete hub replacement at the wheel end. The 17 mm hex format defines the wheel interface, while the threaded hub design and separate locking hardware point to a mechanical assembly that is secured in several steps rather than a simple push fit. The metal pins and set screws support alignment and retention within the hub setup, helping restore the intended connection between axle area and wheel mount when original parts are worn, lost or damaged. The silver finish keeps the parts easy to identify during bench work, and the compact format suits parts storage in an RC workshop or field box. This kind of hardware fits naturally into rebuilds, maintenance sessions and spare-parts stock for regular RC driving. Whether a model is being refreshed after heavy use or prepared with replacement wheel-end hardware before the next run, this set supplies the core mounting parts in one pack.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Battery Holder Set, model accessory

€27.99

The Akuma Battery Holder Set adds a dedicated battery mounting solution to the model layout with a long tray, matching cover plate and support brackets. Black moulded parts and a screw-fastened structure create a clean, component-based setup that suits hobby work on 14 Years+ models and keeps the battery area clearly organised. Alongside the main tray, the set includes a rectangular frame bracket with upright arms, a clamp-style bracket with mounting tabs and a side loop, a small spacer block, 6 black screws and 2 wide hook-and-loop straps. This combination supports a more tailored installation around the chassis area, with the straps wrapping the battery pack while the rigid parts define its position. The separate brackets also help adapt the holder to the available mounting points rather than relying on a loose battery placement. In workshop sessions, the set supports battery installation, refit work and replacement of worn holder parts on the Akuma. It also suits rebuilds where a clear, screw-mounted battery position is needed for a neat internal layout and repeatable pack changes between driving sessions.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Bodyholder Kit, RC spare part set

€6.59

The Akuma bodyholder kit is a dedicated RC spare part set for front and rear body mounting points, built to return the correct connection between chassis and bodyshell on the matching Akuma model. With a minimum age marking of 14 Years, it sits in the hobby and model-building range rather than general toy use. The set includes a structural holder piece, a mounting plate, 2 matching inserts and 2 screws. The black moulded parts are formed for mechanical fastening, with the plate using multiple mounting holes and the main holder section shaped to seat the inserts and secure the assembly. This layout supports a direct replacement of worn, damaged or missing bodyholder components without introducing unrelated parts. As a model supply in the Carson Modelsport range, the kit is aimed at maintenance work that keeps an RC vehicle ready for continued running. In workshop use, the parts suit routine repairs after body mount wear, impact damage or lost hardware. The front and rear application makes the set useful when restoring the shell position and attachment points so the vehicle can return to its intended fit and appearance.  Warning! Not suitable for children under 14 years.

Wishbones

Akuma Lower Suspension Mount Kit, RC spare part

€15.79

The lower suspension mount sits at a critical point in an RC chassis, where the wishbone holder and mounting geometry need to stay cleanly positioned for consistent assembly. This Akuma Lower suspension mount kit is made for the Carson Akuma and Virus platform and supplies 4 parts for that area, giving model-building enthusiasts the correct replacement set for service work or a rebuild. The set is described as a lower suspension mount kit and in the image shows multiple machined components with drilled holes, recessed fixing points and shaped cutouts that match chassis mounting tasks. These details matter during workshop use because the hole layout and part shape guide the components into their intended position within the suspension section. As a dedicated spare part rather than a general accessory, the kit focuses on one defined chassis function and keeps maintenance work specific to the compatible vehicle family. The visible mix of black and silver finished parts underlines the technical character of the set without adding unnecessary bulk to the assembly. In practice, this kind of replacement set fits naturally into routine RC ownership: worn or damaged suspension hardware can be exchanged during a repair session, and a chassis under rebuild can be brought back with matching lower mount components. The 14 years marking places the set in the hobby segment, where tuning, upkeep and precise parts changes belong to the driving experience as much as time on the track.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Motorholder, model accessory mount

€8.49

The Akuma Motorholder is a dedicated mounting part for the Akuma platform, built to secure the motor area with a precisely shaped metal bracket. Its rectangular form combines recessed fixing points with a large central opening and a U-shaped cutout, creating the clearances needed around the drive section while keeping the mount closely integrated with the surrounding assembly. The top face uses countersunk holes so the 5 included hex screws sit flush once fitted. Elongated slots add adjustment range during installation, which supports accurate motor positioning when replacing worn parts or rebuilding the drivetrain section. Three threaded side holes extend the mounting options for adjoining chassis elements, while the darker side walls and machined edges underline the technical character of this spare part. As a focused workshop component rather than a decorative add-on, the mount is shaped around fit, fastening and alignment inside the Akuma layout. This accessory suits bench repairs, routine maintenance and parts replacement on an Akuma model marked 14 Years and up. In a rebuild setup, the bracket forms a defined connection point for the motor section, helping keep the chassis assembly orderly and correctly aligned.  Warning! Not suitable for children under 14 years.

Pinions & gears

Akuma Pinion Gear 14T Model Accessory

€6.89

The Akuma Pinion Gear 14T is a drivetrain accessory for compatible Akuma model vehicles, built around a clear 14-tooth specification that helps identify the correct replacement or maintenance part within an RC setup. In workshop use, that concrete tooth count gives hobbyists a direct reference when checking an existing transmission configuration or preparing a repair. As part of the model supplies range, this gear suits routine servicing, parts organisation and planned spares stocking for RC vehicles in the Akuma line. The product data identifies it as a separate accessory rather than a complete vehicle, which makes it relevant for ongoing upkeep of a running model. The designation Motor Pinion 14T points to its role in the drive system, where a pinion gear forms part of the connection between motor output and the rest of the drivetrain. The listed references 500409082 and 500409083 link the gear to the Akuma context named in the data. On the hobby bench, a dedicated replacement gear helps keep maintenance focused and parts selection straightforward when an existing drivetrain needs attention. The 14 Years age marking is stated in the product data, placing this accessory in the model-building and RC hobby segment.  Warning! Not suitable for children under 14 years.

Additional spares

Akuma Steering Rack, model accessory, aluminum

€8.49

The Akuma steering rack brings a key front-end control component into the workshop as an aluminum replacement part for Carson Akuma models. Its role sits directly in the steering assembly, where the rack forms the connection point for the linkage and supports the intended movement of the front wheels through the chassis layout. The part is described as an Alu steering rack and is intended as a model accessory within the Models & Accessories range. As a dedicated spare part rather than a universal fitting, it matches the Akuma designation named in the data and gives repair and maintenance work a clearly defined replacement for the steering area. The aluminum construction adds a specific material choice to this component, making it a relevant search term for hobbyists who maintain, rebuild, or refresh running gear parts. With the steering plate named in the source data, the part also speaks to focused servicing of the control hardware rather than a general upgrade bundle. In practical use, this kind of replacement belongs on the bench during routine maintenance, after wear in the steering mechanism, or when a build needs the correct Akuma-specific part to return the front end to working order. The 14 Years age marking is stated in the product data.  Warning! Not suitable for children under 14 years.

Ball bearings

CC-02 Chassis Ball Bearing Set, model accessory

€27.99

The CC-02 chassis uses multiple rotating points across its transmission and axle layout, and this ball bearing set is built to replace those wear components with 22 precision-made metal bearings matched to that platform. The mixed sizes shown in the set support the different bearing seats used within the CC-02 chassis, giving model-building enthusiasts a focused upgrade for smoother mechanical operation. Instead of relying on plain bushings, the bearing design supports freer rotation at the points where shafts and driven parts turn inside the chassis. That can help the drivetrain run with less drag during regular use and gives maintenance work a more exact, component-based approach. The set combines 16 bearings of one size with 6 additional bearings in other sizes, reflecting the varied mounting positions found in the chassis layout. For rebuilds, servicing or a fresh parts refresh, that model-specific spread keeps the upgrade aligned with the actual hardware used in the vehicle. In workshop sessions, the set fits naturally into routine maintenance, from replacing worn running parts to preparing a chassis for cleaner, more efficient rotation. It also suits hobby benches where a CC-02 build is being refined with dedicated spare parts chosen for the platform rather than generic hardware.

RC servos

CS-10 Digital Servo, RC servo, waterproof

€31.99

Compact RC control systems rely on a servo that turns radio signals into exact movement, and the CS-10 Digital Servo is built for that task with digital regulation, waterproof construction and a JR plug layout. The black housing with metallic centre section and splined output shaft is shaped for installation in common model applications where steering, throttle or other linkages need controlled travel. Its 0.17-second response supports quick actuation, while the 10 kg torque rating provides the force needed for demanding control duties. Ball bearings support the output shaft for smooth running, and the metal gear train is designed for direct transfer of servo movement to the connected horn and linkage. Included mounting hardware expands setup options with a single-arm horn, an X-shaped horn with multiple linkage holes, rubber grommets and a fastening screw. The 3-wire lead uses the familiar red, black and white layout seen across many RC installations. In an RC car, the servo can manage steering inputs through the splined shaft and horn geometry; in a boat or other hobby mechanism, it can drive throttle or moving control parts with the same compact format. The waterproof design also suits outdoor running where spray and damp conditions are part of the session.  Warning! Not suitable for children under 14 years.

RC servos

CS-17 Digital Servo, RC servo, waterproof

€34.99

The CS-17 brings digital servo control, waterproof construction and 17 kg actuating force into a compact RC component built for precise movement in demanding model setups. With a stated speed of 0.19 sec and a JR connector on the 3-wire lead, it suits steering, throttle and brake functions where clean signal response and dependable installation matter. The housing combines black end caps with a silver centre section, and the top output shaft is metal with a splined interface for secure horn mounting. Side tabs with screw holes support fixed installation in model vehicles or boats, while the included single-arm horn and 4-arm horn offer different linkage layouts. Multiple adjustment holes on the horns make it possible to alter leverage and control travel to match the mechanism in use. Rubber grommets are included for vibration-damped mounting, and the central fixing screw secures the horn to the output shaft. In an on-road chassis, off-road build or boat hull, the servo can be assigned to the moving function that needs measured, repeatable input. The combination of digital operation, waterproof design and included mounting hardware makes the CS-17 a focused choice for hobby workbenches, replacement jobs and fresh RC builds.  Warning! Not suitable for children under 14 years.

RC servos

CS-7 Digital Servo, RC servo, waterproof

€29.99

The CS-7 Digital Servo brings fast digital control to RC installations that need crisp, repeatable movement. With a stated transit time of 0.17 s, this regular-size servo suits steering, throttle or other control functions where quick response and accurate linkage travel matter. The black and silver housing carries a waterproof design, adding flexibility for models that run in wet grass, on damp ground or around spray. Inside the compact case, the servo combines a 7 kg force rating with ball bearing support at the output shaft. That layout helps the spline run smoothly when the horn changes direction under load. The top output shaft accepts the supplied servo horns, including a single-arm horn and a 4-arm horn with multiple linkage holes for different geometry choices. Mounting tabs on the case and the included rubber grommets support secure installation in a chassis, frame or other model structure. The attached 3-wire lead uses a JR plug for connection to compatible radio systems. In cars, boats, aircraft or other hobby mechanisms, the CS-7 Digital Servo fits wherever controlled rotary movement needs to be translated into precise mechanical action. Age marking: 14 years  Warning! Not suitable for children under 14 years.

RC helicopters

Cyber Copter IR 2Ch RTF, helicopter, blue

€21.99

The Cyber Copter IR 2Ch RTF blue brings a futuristic helicopter shape together with ready-to-fly handling for fast access to indoor model flying. Its slim fuselage width of 38 mm, blue finish and switchable LED position lights create a crisp look in the air, especially when flights continue into lower evening light. Infrared control keeps the handling focused on the core 2-channel functions, while the integrated gyroscope supports stable flight behaviour during turns and hovering corrections. Left and right trim adjustment allows the flight path to be tuned more precisely to the room and control input. The helicopter reaches speeds of up to 10 km/h, giving short indoor runs enough pace to feel lively without overwhelming the compact format. At 230 mm long and 95 mm high, with a rotor diameter of 190 mm, the model stays manageable in smaller spaces. The low takeoff weight of 35 g adds to that controlled character during living room or hobby room sessions. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime, and charging runs through USB for straightforward turnaround between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 x LR03 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8+

RC helicopters

Cyber Copter Rescue, RC helicopter, 2.4GHz

€25.99

The Cyber Copter Rescue brings compact rotor flight into a ready-to-fly format with a futuristic body, a 190 mm rotor diameter and a 2-channel 2.4 GHz radio system. At 230 mm long, 95 mm high and only 35 g in takeoff weight, the model is sized for controlled indoor flying, where short lift-offs, hovering practice and gentle turns can happen in a smaller space. Its 3.7 V 150 mAh LiPo flight battery delivers up to 8 minutes of runtime and supports speeds of up to 10 km/h. Charging runs via USB, making the battery easy to top up from common USB power sources between sessions. The transmitter operates the flight direction and the LED position lights, while the trim function allows left and right correction to match the room and handling input. The integrated gyroscope works continuously in the background to steady the helicopter during flight. Included in the set are the ready-to-fly model, the 2.4 GHz remote control, a USB charger, 3 LR03 AAA transmitter batteries and a manual. The age marking is 8 years. Short practice flights in a living room, hobby room or other indoor area suit the compact dimensions well, especially when learning how throttle and steering interact in the air.

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flip

€25.99

Compact dimensions and quick-response controls give the Cyber Drone IR RTF a lively indoor flight character, with a 125 mm length, 135 mm width and 150 mm diameter that keep the quadcopter agile in smaller spaces. The 45 mm rotor diameter and 50 g ascent weight support a light, nimble feel in the air, while the red finish and blue LED lighting make the flight path easy to follow during turns and short hovering runs. The control setup focuses on clear handling rather than complexity. Individually adjustable trim allows left and right correction when the quadcopter drifts, and the gyro helps keep movements more settled during take-off, hovering and directional changes. A button-triggered Coming Home function returns the quadcopter to its home point, adding a direct control shortcut during indoor sessions. The 360° flip function brings a distinct stunt element, and the 3 speed settings make it easy to switch between measured practice laps and faster reactions. 8Y+. With an 8 minute flight time, the model suits short flying sessions in living rooms, hobby spaces or other open indoor areas where compact manoeuvres and quick turns come into play. A replacement battery with 3.7 V, 600 mAh and Molex connector is available separately for extended session planning

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a format built for quick lift-off and controlled indoor sessions. Its 125 mm length, 135 mm width and 150 mm diameter keep the frame small and nimble, while the 45 mm rotor diameter and 50 g ascent weight support a light, responsive feel as the orange drone moves through turns, short climbs and hovering passes. The Coming Home function returns the quadcopter to its home point at the touch of a button, adding a clear control step during flight. Flight time reaches 8 minutes per charge, powered by the included 3.7 V 600 mAh LiPo flight battery. The ready-to-fly package also includes the IR remote control and a USB charger, so the core flying equipment is already part of the set. EN 71, EN 62115 and EN 4709-001 compliance is stated in the product data, and the age marking is 8 years. Short practice flights, button-triggered flips and pace changes across the 3 speed levels give each session a distinct rhythm. Blue flashing LEDs stay visible as the drone circles through a room, rises for a quick stunt, then settles back into controlled directional inputs.

RC quadcopters

Cyber Drone Space Taxi, quadcopter, 2.4 GHz RTF

€34.99

The Cyber Drone Space Taxi 2.4G 100% RTF brings compact quadcopter flying into a 125 mm long and 135 mm wide format with a 150 mm diameter and 45 mm rotor diameter. Its ready-to-fly setup, 2.4 GHz remote control system and 3.7 V 600 mAh LiPo flight battery put the focus on lift-off, hovering and short directional inputs with minimal preparation. With a flight time of 8 min and an ascent weight of 50 g, the model stays light in the air and easy to handle in compact spaces. A one-button Coming Home function sends the quadcopter back toward its home point, adding a clear control aid during short flight sessions. The included flight battery matches the stated 3.7 V and 600 mAh specification, and the data also names a replacement battery with a Molex connector for continued use across multiple sessions. The 2.4 GHz control system supports responsive command input without cable connections, fitting the quick, agile character of a small rotorcraft. Short indoor flights, first hovering practice and simple stunt runs all suit this format well. With an age marking of 8 years, the Cyber Drone Space Taxi fits entry-level remote-control flying where compact dimensions, visible lighting and button-based functions keep each session active and easy to follow.

RC tires & rims

Desert W.4x Tyre Wheel Set, RC wheels

€33.99

The Desert W.4x Tyre Wheel Set brings a rugged off-road look to RC vehicle builds with black tyres, black multi-spoke rims and a tread pattern cut for rough terrain. In the workshop or at the track, the set gives scale-focused off-road models a more purposeful wheel setup with a strong visual link to crawler and desert-style machines. The tyre surface shows deep, widely spaced tread blocks that are shaped to work across loose ground, gravel and uneven sections. Beadlock-style rim detailing adds a technical appearance around the outer edge, while the central mounting hole marks the set out as a running component rather than a display part. The sidewall styling visible on the tyres reinforces the off-road character and gives the wheels a more realistic scale presence once fitted. With tyre and rim already combined, the set concentrates on one of the most visible areas of an RC build and changes both stance and terrain focus in a single swap. On shelf-built crawlers, trucks or other off-road RC models, the wheel set suits projects that aim for a tougher terrain profile and a more planted visual finish. It also works well as a replacement set when an existing build needs fresh wheels with a deeper tread layout for rougher running conditions.

RC brushless motors

Dragster Turbo 2.0, brushless set, 1:10

€59.99

The Dragster Turbo 2.0 brushless set brings a matched drive upgrade to 1:10 RC models with a 2600 kV sensorless brushless motor and a 60 A waterproof ESC. With a no-load speed of 20,720 RPM and short-term output of about 310 W, the set is built for hobby setups that call for stronger acceleration and a more direct throttle feel. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, giving clear reference points for installation planning in suitable chassis. Its continuous current is 42 A. The ESC adds 80 g and is designed for 2S LiPo or 6-cell NiMH batteries at 7.4 V. A forward, brake and reverse function is integrated, and the controller handles 60 A continuous current with 360 A peak current. The T-Plug connector defines the battery-side connection, while the included switch module and receiver lead support standard RC wiring layouts. This set suits rebuilds, performance-focused replacements and fresh 1:10 projects where motor and controller need to work as a coordinated pair. A brushless motor, speed controller and instructions are included. A battery pack, charger and radio gear are required separately.  Warning! Not suitable for children under 14 years.

Pinions & gears

Drakuro Center Differential, RC spare part

€41.99

The center differential with spur gear is a dedicated drivetrain spare part for the Drakuro platform from Carson Modelsport. Listed for the 1:8 4WD chassis and described as a center differential with main gear, it targets the transmission area where power is managed within the named vehicle layout. As a models supplies component, this part is intended for repair, servicing, or replacement work on the specified chassis rather than as a universal fitment. The data links it directly to the Drakuro BL 3S series, including the Anthracite/Red version 500409096 and the Blue version 500409097, which helps place the part within the correct vehicle family. The combination of center differential and spur gear identifies a core drivetrain assembly used in the middle section of the chassis. In workshop use, this kind of replacement part supports planned maintenance after regular running sessions or the renewal of worn transmission components on the matching Drakuro model. For hobby benches focused on keeping a 1:8 4WD vehicle ready for the next outing, the named chassis reference gives a clear platform match.

Pinions & gears

Drakuro Differentials Front and Rear Set

€49.99

The Drakuro differential set covers both key drivetrain positions with 2 units for the front and rear of the chassis. Named in the data as Drakuro Differentials front and rear, this spare part set is aimed at 1:8 4WD running gear where the transmission layout depends on a differential at each axle. Within a 4WD chassis, the differential is the component that distributes drive across the axle while the model is under power. Replacing worn transmission parts can restore the mechanical basis the chassis was designed around, especially when both axle positions are serviced together rather than one side at a time. The set format keeps the front and rear assignment clear and suits maintenance work focused on the drivetrain rather than body or electronics parts. The product data identifies the pair specifically for the Drakuro platform, making the application more precise than a generic RC spare. This kind of replacement set fits naturally into workshop stock for repair, scheduled servicing, or rebuilding a used chassis. For hobbyists working on a Drakuro 1:8 4WD model, the 2-piece layout provides the core differential parts needed for the front and rear transmission positions in one purchase.

Pinions & gears

Drakuro Motor Pinion Gear, accessory, 12T

€8.49

The Drakuro Motor pinion gear is a steel drivetrain spare part built around a clear specification: 12 teeth, a 5 mm bore and a grub screw for fastening on the motor shaft. For compatible 1:8 4WD chassis layouts, that combination gives model-building enthusiasts a defined replacement choice when the original pinion needs to be exchanged. The steel construction focuses this part on the drive system, where tooth count and bore size need to match the installed setup. The grub screw secures the pinion on the shaft, while the 12T format provides the stated gearing reference for maintenance or repair. The product data also links this part to Drakuro BL 3S vehicle versions in anthracite/red and blue, which helps place it within the Drakuro range without overstating compatibility beyond the stated information. In workshop use, this kind of spare part belongs in routine drivetrain servicing, rebuilds after wear, or a direct replacement during ongoing running sessions. For hobby benches that stay organised by exact dimensions and tooth counts, the 5 mm bore and 12T layout make this gear easy to identify within a parts stock.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH 2,2A, charger, 5-8 cells

€23.49

The Easy Charger NiMH 2,2A brings a focused charging setup to RC bench work with a 2.2 A maximum charging current, 25 W output power, and support for NiMH battery packs with 5-8 cells. Delta peak cutoff is built in, so the charger monitors the pack during charging and stops the process at the defined point for this battery type. Its AC 100-240 V input makes the unit suitable for common mains voltages, which helps when the charger moves between home workspaces, club tables, and event locations. The Tamiya charging connector keeps compatibility clear for packs that use this established plug format. Included contents are the charger, power cable, and manual. 14 years marks the recommended age. On a hobby bench, the compact specification keeps the task simple: connect a compatible NiMH pack, power the charger from the mains, and let the delta peak function handle the charge endpoint. It also fits neatly into an RC equipment setup where a dedicated charger for 5-8 cell NiMH packs is needed alongside running gear and workshop essentials.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH 3A USB-C, charger

€16.99

The Easy Charger NiMH 3A USB-C brings a compact charging setup to RC workbenches and track bags with USB-C input, NiMH support and a maximum charging current of 3 A. Designed for 4-8 cell NiMH battery packs, it combines a modern power connection with the familiar charging needs of many hobby-grade RC systems. Its input range of 9-20 V DC allows operation from compatible USB-C power supplies, adding flexibility when charging away from a fixed hobby station. Delta-peak cut-off manages the end of the charging cycle for NiMH chemistry, so the charger is built around the charging behaviour these packs require rather than a one-size-fits-all approach. The Tamiya connector gives a direct link to compatible battery packs, which keeps the setup focused on common RC battery connections. Charger, USB-C charging cable and instructions are included. In practice, this charger suits workshop preparation before a run, battery top-ups between sessions and compact transport in an RC kit. The 14 Years age marking is stated in the product data, and the charger fits naturally into hobby routines built around NiMH-powered models and accessories.

RC helicopters

Easy Tyrann 280, RC helicopter, 2.4 GHz RTF

€39.99

The Easy Tyrann 280 brings coaxial helicopter flying into a compact 280 x 200 x 125 mm format with a ready-to-fly setup, a 2.4 GHz control system and a top speed of 25 km/h. Its blue and black body, landing skids and illuminated nose give the model a clear presence as it lifts off for first hovering attempts in the living room or on a calm patio. Integrated gyro electronics support steadier flight characteristics, while the aluminium tail boom adds structure to the rear section during directional control. Left and right trim can be adjusted from the transmitter to correct the flight path in the air rather than interrupting a session. The switchable LED position indicators help keep orientation visible when the helicopter turns or moves further from the starting point. A 3.7 V 250 mAh LiPo flight battery powers runs of up to 8 minutes, and the included USB charger handles recharging between flights. The set also includes 3 x AAA transmitter batteries, so the model arrives with the key operating components in the box. This RC helicopter fits short practice sessions, from learning stable hovering indoors to controlled passes in light outdoor conditions. With 12 Years as the stated age marking and 1-player operation, the Easy Tyrann 280 suits focused solo flying where control inputs, trim changes and throttle feel can be learned step by step.

Model tools

EdgeArt Brush Modeling Brush with PTFE Tip

€8.69

EdgeArt Brush brings 2 functions together in one modeling tool: a brush for paint work and a PTFE tip for decal handling. That combination supports controlled finishing on scale models, where small surfaces, narrow edges and clean placement call for more than a standard brush alone. The PTFE tip adds a dedicated contact point for moving, aligning or smoothing decals during application, while the brush side remains ready for detail painting and touch-ups. This makes the tool useful across separate finishing steps without changing between unrelated bench tools. The compact format suits careful work on markings, trim lines and other small visual details that shape the final look of a build. With batteries not included and no power requirement stated, the focus stays entirely on manual control and precise handling at the workbench. In a model-building session, the EdgeArt Brush can move from painted details to decal placement as the finish develops across the body or surface. For hobby benches where fine corrections, small graphics and neat edges matter, the combined brush and PTFE tip keep the process direct and exact.

RC electric motors & controllers

Electric Motor 540 23T-BB, RC motor, 6 V

€14.99

The 540 23T-BB electric motor brings classic brushed drive technology to compatible RC vehicle builds with a clearly defined 540 format, 23 turns and 50 W output. A nominal voltage of 6 V and a working range from 4.8 to 8.4 V give model-building enthusiasts concrete figures for planning a suitable drivetrain setup around the motor. Its 19,900 rpm speed, 2.2 amp current consumption and 29 N mm torque outline how this unit is positioned within an RC system: fast enough for responsive running, yet specific enough for considered replacement or tuning decisions. The included cable adds a practical installation detail straight from the box contents, while the single output shaft and compact cylindrical housing suit the familiar layout used in many powered model vehicle applications. As a standalone motor component, it fits naturally into workshop routines such as refreshing a worn drive unit or assembling a new compatible chassis. In use, this motor suits hobby bench setups where voltage, turns and output need to be matched carefully to the rest of the electronics. The 14 Years marking places it within the hobby-focused end of the range, making it a fitting choice for model vehicle enthusiasts working on maintenance, upgrades or fresh RC builds.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Electric Motor 540 80T-BB, RC motor, 6 V

€14.99

The 540 80T-BB electric motor brings classic brushed RC drive hardware into compatible vehicle builds with a 6 V nominal voltage, 80 turns and a measured output of 15 W. Its cylindrical 540 format, output shaft and attached cable create a straightforward basis for drivetrain installation where controlled delivery and clear mechanical feedback are part of the appeal. A voltage range of 4.8 to 8.4 V opens the motor to different matching electrical setups, while the stated current consumption of 0.7 amps adds a concrete reference point for planning the drive system. The rated speed of 5,900 rpm works alongside 130 Nmm torque, giving the motor a balance that suits applications where usable pull and steady response matter alongside rotation. The included cable is already fitted to the motor, so the connection side is present from the start. Age marking: 14 Years. In an RC workshop, this motor fits naturally into replacement projects, fresh chassis builds or drivetrain changes that call for a 540-size brushed unit. It also suits hobby setups where the focus lies on matching voltage, torque and rpm figures carefully to the rest of the running gear for a well-judged result.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger Max 15, charger, 15A 300W

€79.99

Expert Charger Max 15 brings charging, signal measurement and bench testing together in one compact unit for RC and model-building setups. With up to 15 A charging current and 300 W on DC or 100 W on AC, it handles everyday pack management with the output needed for a broad mix of battery types. The supported battery range covers LiPo, LiHV, LiFe, LiIon and LTO packs from 1-6 cells, NiMH from 1-16 cells and Pb from 1-10 cells. An integrated 1 A balancer equalises cell voltage during charging, adding a dedicated function for lithium pack care. Beyond charging, the unit reads PWM, PPM and SBUS signals and measures both voltage and internal resistance, giving useful data for checking electronics on the bench. ESC test mode adds another practical workshop function, and the adjustable power supply broadens the device's role in model maintenance and setup work. A 2.0" IPS display with 320 x 240 pixels keeps menus and readings clear during operation. AC input from 100-240 V and DC input from 7-28 V support use in different workshop and field power situations. With dimensions of 108 x 106 x 60 mm and a weight of 350 g, the charger fits easily into RC pit gear, workbenches and transport cases. Included are 1 charger, 1 AC cable and 1 USB A to USB A upgrade cable. Age 14+  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 2A Charger Set, battery set

€44.99

The Expert Charger NiMH 2A Charger Set combines a compact charging unit with a 7.2 V 2500 mAh NiMH racing pack for RC running sessions with less downtime between uses. Its 20 W output and charging current of up to 2 A give the charger a clear, focused role on the hobby bench, while the transparent housing, ventilation slots and start stop control shown on the unit underline its workshop-ready layout. Designed for NiMH battery packs from 4 to 8 cells, the charger covers more than a single pack format and suits a range of compatible RC applications. The mains input of 110-240 V supports use with common power supplies, which makes the set practical for club rooms, home workspaces and travel between running locations. A clear status LED keeps the charging state visible during operation, and the automatic shut-off function ends the process once charging is complete. The included mains cable connects the charger directly to the power source, while the matched battery pack adds 2500 mAh capacity in a 7.2 V format. On the workbench, the set supports routine preparation before a driving session and straightforward recharging afterwards. For RC enthusiasts aged 14 years and up, it brings together charger, battery and connection standard in a compact format that fits regular hobby use.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 2A, battery charger

€22.99

The Expert Charger NiMH 2A is built for RC and model-building enthusiasts who need a dedicated charger for compatible NiMH battery packs. With support for 4-8 cells, a maximum charging current of 2 A and up to 20 W output power, it covers a practical range for regular workshop charging while keeping the setup focused and easy to handle. The charger runs on 110-240 V input voltage and connects through a TAMIYA plug, making it suitable for many established hobby battery formats. A clearly visible status LED keeps the charging state readable during use, while the Start/Stop control shown on the unit adds direct handling at the charger itself. Automatic cut off manages the charging process with a defined stop function for compatible packs. Cooling vents on the housing support airflow around the unit during operation, and the mains cable is included for immediate connection to a power outlet. On the workbench, in the hobby room or as part of a regular RC maintenance setup, this charger fits neatly into the routine between driving sessions. The set includes the EXPERT CHARGER NiMH 2A, a mains cable and a German/English manual.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 4A Charger Set, battery

€69.99

The Expert Charger NiMH 4A Charger Set combines a compact charger with a 7.2V 4000mAh NiMH racing pack for RC vehicle use and workshop-ready battery care. Automatic shut-off ends the charging process when the cycle is complete, while the status LED gives a clear visual readout during each session. The charger accepts input voltage from 110V to 240V and supports LiPo, LiHV, LiFe and NiMH battery types. Compatible cell counts cover LiPo 2-4S and NiMH 5-8 cells, opening the set to a wide range of common RC power formats. Charging current adjusts from 0.5A to 4A in 0.5A steps, so the output can be set to suit the connected pack rather than running at one fixed rate. Maximum output power reaches 50W. Included in the set are the charger, the NiMH drive battery, a mains cable and 1 XT60 to NiMH adapter cable. On the workbench, the set supports routine charging before driving sessions, battery swaps between runs and straightforward preparation of compatible packs. The included 7.2V 4000mAh racing pack also gives the set an immediate starting point for RC models that run on NiMH power. Radio gear, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz

€119.99

The FS 14K Reflex Stick Pro 4 brings a 14-channel layout, 2.4GHz transmission and a modern ergonomic RC housing into one control system shaped for complex model functions. Its carbon-look surface and illuminated logo give the transmitter a technical, workshop-ready appearance when powered on. The channel structure is designed for detailed function control. Four channels work continuously and fully proportionally for direct response through the control sticks, while channels 7, 8, 9, 10, 13 and 14 are assigned to 3-position toggle switches. Channels 5, 6, 11 and 12 operate through 3-position push buttons with centre position, creating a clear split between proportional inputs and switched functions. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply allows up to 11 V without BEC. A 15-channel receiver is listed in the included contents. For setup work, channels 1 to 4 feature servo reverse and trim, and channels 1 and 4 add dual rate for servo travel adjustment. This makes the system suitable for models that need tailored steering, throttle or auxiliary function behaviour. 100% compatibility is stated for TAMIYA MFC 01, MFC 02, MFC 03 and DMD units, which suits truck and function-model layouts with multiple switching tasks. 14 Years is stated as the recommended age.

Remote-controlled systems

FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz

€149.99

The FS 14K Reflex Stick Pro 4 LCD 2.4GHz brings broad channel control and fine setup options into one radio system built for demanding RC models. With 14 channels, an LCD layout and a 15-channel receiver in the set, it supports complex functions that go beyond basic steering and throttle, while the carbon-look finish and illuminated logo give the transmitter a distinctive technical appearance. Channels 7, 8, 9, 10, 13 and 14 use 3-position toggle switches, while channels 5, 6, 11 and 12 use 3-position push buttons with centre position. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply can reach up to 11 V without BEC. A Graupner J/R connector system is used for integration, and the radio is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as DMD units. The set includes the 14-channel LCD remote control, a 15-channel receiver and a manual. For truck, construction and function models with multiple switching tasks, the channel layout supports lighting, sound and auxiliary functions from one handset. The 14 Years marking fits advanced RC use, where stored model setups and detailed channel assignment matter during regular driving and system changes.

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

€99.99

The FS 6K Reflex Stick Pro 4 2.4GHz brings 6-channel radio control into a layout built for detailed model setups and precise handling. Four continuously adjustable, fully proportional channels work alongside a 3-position push button on channel 5 and a 3-position toggle switch on channel 6, giving a clear control structure for driving functions and switched features. The integrated failsafe system adds an important control function for model operation. Trim for channels 1-4 supports exact correction directly at the transmitter, while dual rate for channels 1-2 adjusts servo travel for a more tailored response. The control sticks use precise, smooth mechanics, and the housing combines an ergonomic shape with a carbon-look surface and an illuminated logo when powered on. The transmitter operates at 4.8-6 V with 4 AA cells, the receiver power supply reaches up to 11 V without BEC, and the connector system uses Graupner J/R. Compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units expands the range of suitable model applications. On the bench, the channel layout supports careful setup of steering, throttle and auxiliary functions before a model heads out. During driving sessions, the separate switching options and proportional control help keep inputs clean and deliberate across different model configurations.

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

€109.99

The FS 6K Reflex Stick Pro brings 2.4GHz radio control, a 6-channel layout and an LCD interface into one focused setup for model driving with a clear, technical feel in hand. Smooth control sticks, an ergonomic housing and a carbon-look surface shape a transmitter that suits longer sessions at the workbench and on the track alike. Channels 1 to 4 are continuously adjustable and fully proportional, while channel 6 is assigned to a 3-position toggle switch and channel 5 to a 3-position push button with centre position. The transmitter stores 15 model memories, making it easier to keep separate configurations ready for different vehicles. For channels 1 to 4, servo reverse changes direction of movement, trim corrects neutral position, dual rate adjusts servo travel, EPA limits servo travel and EXP changes response characteristics around centre input. The receiver power supply can reach up to 11 V without BEC, and the system is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as the DMD unit. A 6-channel receiver and manual are included. 4 AA cells are required separately for the 4.8 to 6 V transmitter operating voltage. With a minimum age marking of 14 years, this radio set fits hobby-focused RC setups where multiple channel functions, stored profiles and detailed response adjustment matter during driving and setup.

Model tools

GlueBrush 13 mm Tip Refill Pack, model accessory

€4.89

Precise adhesive work often depends on the right contact width, and this GlueBrush refill pack adds 18 replacement tips in a 13 mm format for repeated use at the workbench. The wider tip size suits glue application across broader bonding areas, where an even spread helps keep joins neat during model-building and repair tasks. As a dedicated refill for the GlueBrush system, the pack supports ongoing workshop use without changing the established handling of the applicator itself. The 13 mm format gives a clear, practical option when adhesive needs to cover more surface than a narrow tip allows. That makes the set useful for assembly stages, material joins and touch-up work where consistent glue placement matters. With 18 replacement tips in one pack, fresh working heads are available for multiple sessions instead of relying on a worn applicator end. On a model-building bench, the refill pack fits naturally into regular adhesive routines, whether one stage calls for a clean new tip or separate materials are being handled in sequence. The format also works well as workshop stock for hobby projects that return to glue work again and again.

Model tools

GlueBrush 3 mm Tip, refill pack, model supply

€4.89

GlueBrush 3 mm Tip (18) Refill Pack brings a straightforward supply of fresh applicator tips to the workbench for precise adhesive handling in model-building tasks. With 18 replacement tips in a 3 mm format, the set supports repeated glue application on smaller contact points, narrow edges and detail-led assembly steps. The 3 mm tip size helps keep the glue line defined when working on compact joins that need more control than a broader applicator can offer. As a refill pack, this set is built around maintaining the GlueBrush setup already in use, making it a practical addition for ongoing builds, touch-up work and repair jobs. The pack format suits hobby benches where consumables need to stay ready between projects, and the quantity of 18 tips provides a useful reserve for regular adhesive work. The age marking is 14 years and up. On a model-building table, these replacement tips fit naturally into assembly sessions that move between test fitting, bonding and detail placement. They also support careful adhesive application during maintenance work, when a fresh tip can help keep handling neat around smaller parts and tight spaces.

Model tools

GlueBrush-Set with 3mm Nano Tips, model tool

€13.39

Precise adhesive placement can make the difference between a clean assembly and visible excess on a finished model. The GlueBrush-Set with 3 mm Nano Tips is built for controlled glue work on small contact areas, bringing a finer application point to detailed model-building tasks. The set format combines a GlueBrush applicator concept with 3 mm Nano Tips, giving model builders a concrete tool for directing adhesive onto narrow joins and small parts. That focused application helps when working around edges, seams and compact assemblies where broad glue spread can interfere with the finish. In repair work, touch-up steps or fresh builds, the smaller tip size supports a tidier workflow on parts that need accuracy rather than volume. The 3 mm tip dimension is the key working detail here, because it suits jobs where placement matters more than coverage. On the workbench, this set fits careful assembly sessions with scale models and hobby projects that call for neat glue control on fine components. The age marking 14 Years is stated in the product data.

Model tools

GlueBrush-Set, model supplies, 13 mm nano tips

€13.39

The GlueBrush-Set with 13 mm nano tips is built for adhesive work that calls for a finer touch on model-building projects. Its compact tip format helps place glue on small contact areas, narrow seams and delicate parts where broad applicators can leave excess material behind. Within model supplies, this set supports controlled handling during assembly, touch-up and repair work on miniature components. The 13 mm tip length gives access to confined spots around edges and joins, making it easier to guide adhesive exactly where the bond is needed. That focused application can help keep surrounding detail cleaner on small-scale builds and reduce smearing across adjacent surfaces. Because the set is centred on precision rather than volume, it fits tasks that involve careful placement on trim, fittings and other fine sections. On the hobby bench, the GlueBrush-Set works well alongside regular building tools when a project reaches the stage for neat adhesive application. It also suits maintenance sessions where a small part, seam or detail piece needs accurate glue placement without flooding the area.

Model tools

IronPoint Brush 1.0 mm Ball, model paintbrush

€8.49

The IronPoint Brush 1.0 mm Ball brings a fine-format painting tool to model work where small areas and controlled handling matter. Its 1.0 mm ball tip gives hobby benches a focused option for placing paint on compact sections, edge lines and detail zones that benefit from a smaller contact point. Within model finishing setups, a brush like this supports careful colour work without shifting into broad coverage. The ball tip format suits measured application on parts that need accuracy rather than speed, making it useful for touch-ups, narrow accents and small painted elements. The slim working size also fits projects where different brush widths are used across separate stages, with the 1.0 mm format covering the finer end of that workflow. As a model supplies tool, it belongs alongside paints and other finishing essentials used to refine surface details. On the workbench, the brush suits detail passes on scale components, figures or decorative sections where clean placement counts. It also fits follow-up painting after assembly, when smaller areas need careful finishing or colour correction.

Model tools

IronPoint Brush 1.4 mm Ball, model brush

€8.89

The IronPoint Brush 1.4 mm Ball brings a fine, controlled tool into model finishing, with a ball-shaped 1.4 mm tip that suits careful paint placement on small sections and detailed surfaces. In a hobby workspace, it fits naturally beside paints and parts where neat edges and measured brush movement matter. Its single-brush format keeps the choice straightforward when a specific tip size is needed for touch-ups, accents or compact painted areas. The ball tip shape supports close work around contours, raised details and narrow sections that benefit from a smaller contact point. For model-building enthusiasts, that makes it useful during colour application on figures, accessories or body details where broad coverage would be less precise. The product data states an assembly time unit, voltage unit and operating time unit at database level, but no usable values are provided for this brush, so the copy stays focused on the confirmed brush specification. On the bench, the IronPoint Brush can move from small correction work to deliberate detailing passes without changing to a larger format. The stated age marking is 14 Years, and the 1-brush pack suits replacing a worn detailing tool or expanding an established painting kit with a dedicated fine-tip option.

Model tools

IronPoint Brush 2.0 mm Ball Hobby Tool

€8.99

IronPoint Brush 2.0 mm Ball is a precisely designated hobby tool from the Carson Modelsport range, defined in the data by its 2.0 mm ball format and single-piece pack count. That clear specification gives model-building enthusiasts a concrete reference when selecting tools for bench work that calls for a named tip size and shape. The available data is intentionally compact, so the description stays close to the verified facts. Both the ShortDescription and ShortDescriptionMM fields identify the same IronPoint Brush 2.0 mm Ball designation, which supports consistent catalogue recognition and straightforward matching when replacing an existing brush or adding a specific format to a workshop setup. The age marking is 14 Years, stated exactly as provided. The pack count is 1, making this a single brush rather than a multi-piece set. Within a model-building workspace, a clearly labelled 2.0 mm ball brush suits organised tool selection, whether the aim is maintaining a dedicated bench assortment or keeping a known format ready for repeat tasks. The concise specification makes this version easy to identify in storage, workshop drawers or project planning where exact naming matters.

Model tools

IronPoint Needle 0.5 mm, model tool tip

€10.99

IronPoint Needle 0.5 mm Pointed is a fine model-making tool component with a clearly defined pointed tip for controlled work on small-scale tasks. The 0.5 mm size gives this needle a narrow working profile that suits precise contact in tight areas, whether the focus is detailing, touch-up work or other careful workshop steps. As a single needle version, it fits situations where a specific tip size is needed rather than a mixed set. The pointed shape supports exact placement on edges, corners and small sections that benefit from a slim tool profile. In a hobby workspace, a dedicated 0.5 mm needle can help keep processes consistent when the same fine format is required across repeated tasks. The stated minimum age is 14 years. On the bench, this kind of narrowly sized needle suits focused sessions where small parts and compact surfaces call for measured handling. It also works well as a spare kept alongside model supplies, ready when a matching pointed 0.5 mm needle is needed for continued project work.

Li-ion batteries

Li-Ion replacement battery, RC accessory, JST

€9.99

This Li-Ion replacement battery brings the correct 3.7 V power supply and 500 mAh capacity to selected 1:24 Carson RC Sport vehicles, keeping compact RC car setups ready for the next drive. The JST plug connection gives the battery a defined connector format for models built around this matching lead. With 1.9 Wh, the battery is designed as a rechargeable spare pack for small-scale electric RC cars that use this voltage and connector layout. The visible 2-wire lead connects the battery pack to the vehicle electronics through the specified JST plug, making compatibility the key point when choosing this spare. The pack is listed for the 1:24 Lamborg.Murcielago SV, Lamborgh.Veneno, M.-Benz SLS AMG, Ford GT, Aston Martin Vantage and Lamborghini Sian. The pack contains 1 spare battery. As a workshop shelf spare or a direct replacement for a used pack, this battery fits neatly into an RC routine built around short charging breaks and repeat driving sessions. For collectors and hobby users running several compatible 1:24 road cars, the shared battery format keeps the setup focused on the models named in the compatibility list.  Warning! Not suitable for children under 14 years.

RC truck accessories

Low Loader Control TLS-SH RX IR, RC control unit

€159.99

Built for detailed 1:14 truck and trailer projects, the Low Loader Control TLS-SH RX IR adds electronic control to a compatible gooseneck low-bed trailer with steerable low-loader axles. The set combines a motor control unit for the gooseneck, a servo steering control unit and an IR receiver to connect the trailer functions into one coordinated system. The infrared link transfers signals from the gooseneck to the drop-bed section, so the steering and related trailer functions can be operated across the articulated layout. Included in the set are a steering sensor, an IR receiver for the steering unit, an IR transmitter for the gooseneck, a switch cable for motor control and a 4-pin connection cable. The electronics run on 7.4 to 12V DC, the BEC provides 5V DC at 5A for the steering servo, and the motor controller is rated for 7.4 to 12V DC at 5A. Compatible light functions can also be retrofitted through the available outputs for taillights, a rotating beacon and warning signs. This control set is designed for the CARSON gooseneck low-bed trailer 500907700 and for controlling steerable low-loader axles 500907699. Age 14 Years. A transmitter is required separately: the MFC-TLS transmitter for use with a TAMIYA MFC, or the UNI-TLS transmitter for third-party systems.

Chargers & charging cables

Multi-Charger Cable 8in1, charging lead, 4mm

€10.99

The Multi-Charger Cable 8in1 brings 8 common RC charging connections together in one harness, linking a charger with 4 mm banana plugs to a wide spread of battery connector standards. Crocodile clips, Futaba, BEC, T-Plug, XT90, XT60, Tamiya and Mini Tamiya are all present on the lead, giving the bench a compact way to handle different packs without changing between separate adapters. The cable format suits model-building enthusiasts who keep several battery types in rotation across different machines and electronics. The paired red and black 4 mm banana plugs form the charger side, while the branched output end presents the charging options in one place. This makes the lead useful when older packs, current high-current connectors and smaller legacy formats all need support within the same workshop setup. The harness works as an accessory in the charging chain rather than as a battery or charger itself, so its role stays clear when organising RC equipment. On the workbench, the Multi-Charger Cable 8in1 helps streamline routine charging before driving sessions, maintenance work or battery checks. It also fits neatly into a field box or workshop drawer as a single connection solution for mixed RC collections.  Warning! Not suitable for children under 14 years.

NiMH batteries

My First Magic Machine Battery, 4.8V RC pack

€15.49

The My First Magic Machine battery brings the stated 4.8 V NiMH setup and 600 mAh capacity into one dedicated power pack for compatible Carson RC models. Built with a JST plug, it connects through the specified connector format for the My First Magic Machine reference 500404201/02, making it a focused replacement or spare for the named vehicle platform. As a rechargeable NiMH battery pack, it is configured for repeated use in RC driving rather than as a loose-cell solution. The 4.8 V rating defines the voltage level for the intended model, while the 600 mAh capacity identifies the pack specification clearly when selecting a matching battery for maintenance, continued running, or a second charged pack between sessions. The attached lead and plug arrangement keep the connection format integrated into the pack itself. This makes the battery straightforward to identify within an RC parts box where voltage, capacity, chemistry, and connector type all matter. Whether kept as the main running pack or stored as a backup for the next outing, this battery serves as a model-specific power source for the My First Magic Machine range. For hobby benches, charging routines, and replacement planning, the clearly stated NiMH, 4.8 V, 600 mAh, and JST details give the essential matching points at a glance.

Remote-controlled systems

RA 3Ch Reflex Stick Pro 4, remote control, 2.4GHz

€49.99

The RA 3Ch Reflex Stick Pro 4 brings 2.4GHz radio control together with a classic stick layout for model driving that calls for direct, proportional input. With 3 channels and 2 continuously adjustable, fully proportional control paths, steering and throttle commands can be metered with fine control, while channel 3 is switched in 2 positions for a clear auxiliary function. Channel 1 includes dual rate to adjust servo travel, which helps match the steering response to different model setups. Servo reverse changes the direction of movement for the channels when the installation requires it, and the trim function for channels 1-2 supports accurate neutral settings. The transmitter operates at 4.8-6 V with 4 AA cells, and the receiver power supply allows up to 11 V without BEC. The connector system uses Futaba/Graupner J/R, giving the set a clear interface for compatible RC components. The set includes the 3-channel remote control, a 4-channel receiver and a manual. An LED battery status indicator keeps the transmitter charge level in view during running sessions, while the failsafe system provides a defined response if the radio link is lost. Age 14 Years+  Warning! Not suitable for children under 14 years.

Remote-controlled systems

RA 4Ch Reflex Stick Pro 4, remote control, 2.4GHz

€64.99

The RA 4Ch Reflex Stick Pro 4 2.4GHz LCD brings 4-channel control and detailed setup functions into one radio system for model driving from age 14 years. Its LCD layout supports direct access to key settings, while 15 model memory slots keep multiple vehicle configurations stored and ready for use. Two fully proportional channels allow continuously adjustable steering and throttle input, and 2 additional switch channels handle special functions on compatible models. Channels 1 and 2 can be tuned with servo reverse, trim, dual rate, EPA and EXP, giving clear control over direction, centre position, servo travel limits and response curve. The integrated failsafe system adds a concrete control safeguard for supported setups. The transmitter operates at 4.8 to 6 V with 4 AA cells, and the connector system uses Graupner J/R. A 4-channel receiver is included, so the system can move straight into installation on a suitable model. The receiver power supply supports up to 11 V without BEC, which suits a wide range of hobby configurations. This combination fits model-building enthusiasts who want one radio system for several vehicles, special functions and fine setup work at the bench or track.  Warning! Not suitable for children under 14 years.

Catalogues & merchandise

RC Catalogue 2026/27 Models Supplies

€5.49

This printed RC catalogue gathers the Carson Modelsport 2026/27 range into a bilingual German and English reference format for model and accessory browsing. As a physical catalogue rather than a vehicle or spare part, it serves as an overview source for checking lines, categories and range structure in one place. The product data identifies the catalogue within Models & Accessories and Models Supplies, which frames it as reference material for the hobby rather than as running gear or workshop equipment. The 2026/27 designation gives it a clear edition context, while the GER/EN format supports reading across 2 languages without switching between separate versions. Because the data does not list page count, dimensions or included extras, the copy stays with the confirmed facts: printed catalogue, bilingual content and range-reference function. It fits naturally into bench-side planning, desk browsing or quick range checks when comparing model families and accessory groups. In hobby spaces where a screen is not the first choice, the catalogue provides an offline source for orientation within the Carson Modelsport assortment.

RC remote controls

RC-Reflex Pro 3 Electric Set, RC radio system

€124.99

The RC-Reflex Pro 3 Electric Set brings the core electronics for an RC ground model into one coordinated package. A 2-channel 2.4 GHz transmitter works with a 4-channel mini receiver to handle steering and throttle commands, while the pistol-grip layout supports one-handed control with a trigger and side wheel format familiar in car-based RC setups. Alongside the radio link, the set includes a CS-6 steering servo for installation in a compatible model and a 7.2 V 3000 mAh drive battery for the vehicle itself. The Expert Charger is part of the set, and 4 AA transmitter batteries are also included for the handset. This combination suits fresh builds, replacement electronics, or an upgrade from older radio gear where the main control components need to be assembled in one step. With 2 frequency channels and 16 listed parts, the set covers the central functions needed to equip a model for radio-controlled driving. In use, the electronics set fits naturally into workshop preparation before a chassis goes to the track, car park or garden path. The included components support installation, charging and control in a format aimed at hobby-focused RC driving, whether for a first compatible setup or as a practical replacement package for an existing model.  Warning! Not suitable for children under 14 years.

RC remote controls

REFLEX STICK PRO 3.1, radio set, 2.4GHz

The REFLEX STICK PRO 3.1 Elektro Set brings the core electronics for an RC model into one coordinated package, centred on a 2-channel 2.4GHz radio system with fully proportional control. Steering and throttle inputs respond progressively rather than in fixed steps, which supports cleaner line control on the track, at the workbench, or during first setup runs. The transmitter operates on 4.8-6V and uses a stick layout familiar across many hobby-grade applications. Beyond the radio itself, the set combines a 2.4G receiver, a CS3 servo, a 7.2V 2500mAh racing pack, a USB charger with 7.2V 250mAh output, and 4 AA Ansmann batteries. Servo reverse is available on both channels, so steering or throttle direction can be corrected directly at the transmitter when the installed linkage runs opposite to the intended movement. The steering and throttle trim functions help dial in neutral position and straight tracking, while dual rate on the steering channel allows reduced or expanded steering travel depending on the model's response. A charging socket with positive pole inside and an LED battery charge status indicator add clear handling details during use. The plug system is compatible with Futaba and Graupner JR, which broadens integration across common RC installations. In a touring car, buggy, boat, or similar hobby build, the set covers the key radio and power components needed to move from installation to controlled running with matched electronics.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex Stick Pro 4 WP Receiver, RC receiver

€51.99

Functional RC models often depend on more than steering and throttle alone, and this 15-channel receiver is built for that broader control layout. Operating in the 2.4 GHz frequency range, the Reflex Stick Pro 4 WP receiver is designed as a replacement unit for compatible Carson radio systems while keeping the electronics package compact at 52 x 32 x 13 mm. The 15 available channels create room for models that use several separately controlled functions, such as truck equipment or specialty vehicle features that need their own signal paths. Its 15 g weight helps when chassis space is already shared with servos, linkages and wiring, because the receiver can be integrated without taking over the layout. The compact format also suits installations where bodywork, interior parts or scale details leave little free room around the radio compartment. Compatibility is stated for the Carson FS 14K Reflex Stick Pro 4, FS 14K Reflex Stick Pro 4 LCD and FS 15K Reflex Stick 4 Pro LCD-MFC 2.4 GHz remote controls. In workshop use, it fits as a direct replacement when an existing radio setup needs the same control architecture again. In running sessions with function-heavy RC trucks or specialist builds, the 2.4 GHz system supports stable command transfer across the model's multiple control tasks.

RC remote controls

REFLEX XS 2.4GHz Transmitter, RC controller

€25.99

The REFLEX XS 2.4GHz transmitter brings classic wheel-style RC control to compatible XS-Chassis models with a compact pistol-grip format, a side steering wheel and a trigger for throttle and brake input. The black and dark grey housing keeps the layout focused, while the 2.4GHz system suits interference-conscious driving sessions where clean radio control matters. Its control concept follows the familiar car transmitter arrangement: the foam-covered wheel handles steering input, and the trigger manages acceleration and braking through one hand position. Visible setup markings such as REV, ST, TH and D/R point to onboard adjustment functions that support model-specific tuning rather than a fixed one-setting layout. The top section also carries additional adjustment points, giving hobby users direct access to setup changes on the transmitter body. This transmitter is intended for CARSON XS-Chassis references 500404360, 500404361, 500404362, 500404363, 500404252, 500404253, 500404254 and 500404255. The 14 Years age marking is stated in the product data. In the workshop, at the track or on a casual driving surface, the wheel-and-trigger format keeps steering and speed control close together for responsive handling on compatible RC vehicles.

RC electric motors & controllers

REFLEX-XS ESC/RX Unit, RC electronics for XS-Chassis

€39.99

The REFLEX-XS ESC/RX unit is a dedicated electronics replacement for Carson XS-Chassis vehicles in 1:10 scale, combining ESC and receiver functions in one compact module. With its XT60 plug connection, it is set up for the stated chassis family and supports a clean return to the original control layout when an existing unit needs to be replaced. This spare part is assigned to the Carson XS-Chassis range under the references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The listed vehicles include Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants, which makes the unit a precise match for several models within the same platform. As an ESC/RX combination, it brings two core electronics functions together in one component, which helps keep the installation focused on the chassis system named in the data rather than on mixed standalone parts. Within workshop use, this unit suits repair, maintenance and platform-specific replacement work on compatible Carson models. The 14 years and up marking is stated in the product data, and the part sits in the model supplies area for hobby-oriented vehicle upkeep and running repairs.

Model tools

RubberEdge Brush 0 Cone Model Supply

€9.89

RubberEdge Brush 0 Cone is a model supply shaped for detail-led hobby work, combining a 0 size with a cone tip profile for controlled application on small sections. The single-brush format keeps the contents straightforward when a specific shape is needed for a modelling bench or as a direct replacement within an existing tool set. The product data identifies this brush as 1 piece and states an assembly time unit, voltage unit and operating time unit, but gives no corresponding values, so the usable focus stays on the named brush format itself. Within that format, the cone shape points to narrow contact areas and more exact placement than a wider brush head allows. The 0 designation further anchors it as a fine-detail option within model supplies, suited to tasks where a compact tip matters more than broad coverage. The product data also states that batteries are not included, with no battery-driven function indicated for the brush. On a hobby table, this brush fits neatly into careful finishing sessions, touch-up work and other small-scale application steps where a defined tip shape helps keep the working area tight. The age marking in the data is 14 Years.

Model tools

RubberEdge Brush 0 FlatEdge Model Brush

€9.89

RubberEdge Brush 0 FlatEdge brings a focused tool format to detailed model finishing, with a size 0 profile and a flat edge that supports controlled paint placement on small sections and defined lines. In careful bench work, that shape helps keep strokes deliberate when edges, contours or compact painted areas need a tidier pass than a broader brush can provide. The product data identifies a single brush, so the setup stays centered on one dedicated painting tool rather than a mixed assortment. The FlatEdge form lends itself to measured coverage across short runs, while the size 0 format suits tighter working zones where larger tips can overwhelm the area. For hobby routines that involve touch-ups, trim painting or small visual accents, this brush adds a precise option to the painting kit. Age marking 14 Years is stated in the product data. Paints are required separately. On a model-building table, RubberEdge Brush 0 FlatEdge fits neatly into finishing stages such as edge work, small corrections and compact color application. It also works well as a dedicated brush kept aside for narrow painted details during repeat workshop sessions.

Model tools

RubberEdge Brush 0 TriEdge Model Brush

€9.89

The RubberEdge Brush 0 TriEdge brings a focused painting tool to model finishing, with size 0 shaping aimed at narrow edges, small contours and controlled detail work. Its single-brush format suits hobby benches where careful paint placement matters more than broad coverage. The TriEdge form supports deliberate strokes around borders and tight sections, making it useful for trim lines, touch-ups and small painted accents on model parts. RubberEdge naming points to an edge-oriented brush concept that fits jobs where clean separation between painted areas is needed. With 1 brush included, the set stays simple and easy to slot into an existing painting setup without adding unnecessary bulk. The 14 Years marking places it within a hobby-focused range suited to more precise handling and finishing tasks. On the workbench, this brush fits moments that call for accuracy rather than speed, such as refining corners, following narrow outlines or correcting small areas after the main coat has dried. It also works well as a dedicated detailing brush kept alongside other painting tools for repeated fine-line tasks across different model projects.

Model tools

RubberEdge Brush 0, model brush, BaseCurve

€9.89

RubberEdge Brush 0 BaseCurve brings a specialised shape to model painting, combining a 0 brush size with a BaseCurve profile for controlled work on edges, contours and smaller painted sections. In model finishing, that focused format helps paint follow shaped lines more cleanly than a broader brush intended for larger areas. As part of the model supplies range, this brush suits detail-led tasks where narrow coverage and careful placement matter. The RubberEdge naming and BaseCurve designation point to a brush designed around edge work rather than general broad coverage, making it a useful addition for trim areas, fine borders and touch-up stages within a paint session. The stated age marking is 14 Years. Batteries are not included, and no battery function is indicated for this brush. On the workbench, the compact 0 size supports slower, more deliberate brush control when a model build reaches the painting and finishing stage. It fits projects that call for neat colour placement around curved forms and defined edges, whether refining a single section or completing final painted details.

Model tools

RubberEdge Brush 2 BaseCurve Model Supply

€10.29

RubberEdge Brush 2 BaseCurve is a model supply component named for precise identification within a hobby setup. The single-piece format keeps the focus on one clearly defined part, which matters when a bench stock list depends on exact designations rather than broad category labels. The product data states an assembly time unit in minutes, a maximum operating time unit in Minutes, a voltage unit in Volt and a maximum speed unit in km/h, but no verified figures are provided for this component. That leaves the confirmed substance of the listing in its exact name, its placement in Models & Accessories and Models Supplies, and its quantity of 1. For hobbyists managing repairs, replacements or planned builds, that exact naming helps separate this part from similar workshop supplies and supports cleaner reordering when a project calls for the same component again. Minimum age is stated as 14 Years. Batteries are not included. On a parts shelf, in a repair tray or alongside other model supplies, the single RubberEdge Brush 2 BaseCurve component can be kept ready for maintenance tasks where the exact part name is the key reference.

Model tools

RubberEdge Brush 2 Cone Model Supplies

€10.29

RubberEdge Brush 2 Cone is listed as a model supplies accessory within the Carson Modelsport range, giving RC and scale-model workbenches a clearly named part for maintenance and workshop organisation. The short designation identifies this version as 2 Cone, which helps distinguish it from other supply parts when replacements or matching workshop stock are being selected. The available data supports a focused, factual profile rather than a broad feature list. This accessory belongs to the Models & Accessories area and sits specifically in Models Supplies, placing it in the practical side of hobby work where clearly identified parts matter. The age marking is 14 Years. Batteries are not included in the data, and no separate runtime, speed, voltage, dimensions, or pack contents beyond the stated designation are confirmed here, so the copy stays with the verified information. On the bench, a clearly labelled supplies part helps keep repair, upkeep, and parts sorting straightforward across ongoing RC and model-building sessions. It fits naturally into workshop routines where the exact accessory name matters as much as the part itself when planning replacements or maintaining a consistent stock of supplies.

Model tools

RubberEdge Brush 2 FlatEdge Model Supply

€10.29

RubberEdge Brush 2 FlatEdge is a model supply built around a clearly defined brush format for painting and finishing work. The name points to a flat-edge brush shape, giving hobby benches a focused tool for controlled paint placement on edges, lines, and smaller sections where a broader brush can feel less exact. As a single brush, it suits restocking a specific tool rather than replacing a whole set at once. That makes it easy to keep a dedicated brush ready for touch-ups, detail passes, or careful coverage on parts that call for a flatter contact surface. The 14 Years age marking places it in a hobby context where steady handling and deliberate brush movement are part of the process. No battery is included, and none is needed for use. On the workbench, this brush fits neatly into painting sessions that move between base coverage and more precise finishing steps. It also works well as a spare kept alongside other model supplies, ready when a defined flat edge is the better match for the task at hand.

Model tools

RubberEdge Brush 2 TriEdge Model Supply

€10.29

RubberEdge Brush 2 TriEdge is a clearly designated model supply part for hobby-oriented maintenance work. The product data identifies 1 included piece and states an assembly time unit in minutes, positioning this component within a setup where fitting or replacement is part of regular workshop handling. Within a model bench context, a named replacement part like this helps keep compatible equipment in service when an existing brush reaches the end of its usable life. The designation TriEdge gives this component a distinct identity inside the range, which matters when matching spare parts accurately to an established setup. The product data also states that batteries are not included, confirming that this listing is not a powered ready-to-run vehicle but a supply component in the models and accessories area. The age marking is 14 Years. Used as part of routine upkeep, a replacement brush belongs in the practical side of model ownership alongside fitting, checking and returning compatible equipment to operation. For hobbyists managing wear parts and workshop stock, a single replacement piece keeps the purchase focused on a specific maintenance task rather than a broader bundle.

RC servos

Servo CS-9, RC servo, waterproof metal gear

€22.99

The CS-9 brings regular-size servo control to model builds that need quick response, a waterproof housing and a straightforward JR connection. Its black and blue case, top output shaft and 3-wire lead suit a wide range of RC installations where compact control hardware needs to translate radio commands into clean mechanical movement. Inside the housing, the metal gear transmission is built for repeated steering or control inputs, while the 9 kg rating and 0.1 speed support fast actuation in demanding hobby setups. The included servo horns expand the mounting options at the spline: a single-arm horn and a 4-arm cross horn provide different linkage positions, and the set also includes rubber grommets and a mounting screw for installation. The regular-size format makes the servo a useful choice across different model categories where a standard servo bay is part of the layout. Age 14 Years is stated for this servo. In RC cars, the CS-9 can handle steering duties where quick centring and firm linkage control matter through corners and surface changes. In boats, aircraft or robotics projects, the same servo format supports control surfaces or moving functions that rely on compact dimensions, a JR plug and waterproof construction.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Spare Battery Cage Fighter, battery, 7.4 V JST

€9.99

This spare battery is made for the Cage Fighter platform and adds a defined power option for RC running sessions with a 7.4 V LiIon setup. The rechargeable pack combines a compact format with a fitted JST plug connection, so it matches the stated connection type for the compatible vehicle range. The product data names 600 mAh capacity and identifies the battery as suitable for 2 specific 1:10 models: 500404302 Cage Fighter 2.4GHz 100% RTR green and 500404303 Cage Fighter 2.4GHz 100% RTR orange. That clear model assignment helps avoid guesswork when replacing a used pack or keeping a second battery ready between runs. As a spare battery, it focuses on the core requirement of the vehicle setup: the correct voltage, the correct connector and compatibility with the named Cage Fighter versions. In practical use, the battery can serve as a replacement for an existing pack or as an extra unit kept ready for the next outing with the model. The single included content is 1 spare battery, making it a straightforward choice when the setup calls for the stated 7.4 V LiIon format and JST connection.  Warning! Not suitable for children under 14 years.

RC helicopters

Starter Tyrann 230, RC helicopter, IR 2Ch RTF

€20.99

The Starter Tyrann 230 brings compact helicopter flying into an easy indoor format with a 2-channel infrared control system, a 225 mm length and a low 31 g weight that keeps handling light and approachable. In cyan trim, the ready-to-fly layout creates a clear first step into RC flight while the switchable LED position indicators add visible orientation during movement. Left and right trim adjustment allows the flight path to be fine-tuned directly from the transmitter, which helps maintain cleaner hovering and steadier directional control in smaller rooms. The 180 mm rotor diameter gives the helicopter a balanced rotor footprint for controlled lift, while the 10 km/h speed limit keeps the pace manageable for learning basic manoeuvres. A 3.7 V 150 mAh LiPo flight battery powers the model, and charging runs through the included USB charger rather than a separate charging station. The set includes the ready-to-fly helicopter, the IR remote control system, the flight battery and the charger. 4 AA batteries are required separately. With a height of 97 mm, the helicopter stays compact enough for living rooms, hobby spaces or bedroom flight sessions where short take-offs, hovering practice and gentle turns are the focus. The combination of low weight, onboard lighting and trim control suits repeated indoor runs that build confidence with each battery cycle.

RC helicopters

Toxic Spider 340, RC helicopter, 100% RTF

€39.99

The Toxic Spider 340 100% RTF combines a coaxial rotor system, intelligent gyro electronics and a compact indoor format in one ready-to-fly RC helicopter. Black and green styling, illuminated LED headlights and a top speed of 10 km/h give each flight a crisp, technical presence as the model lifts from its landing skids and settles into stable hovering. Its 2.4 GHz remote control system works with 3.5 channels, allowing coordinated inputs for ascent, descent, turning and directional correction. The aluminium tail boom adds a light, rigid rear structure that supports balanced handling in the air. A 3.7 V 400 mAh LiPo flight battery powers the helicopter for up to 8 minutes, giving enough time for repeated take-offs, short circuits and hover practice. Included in the set are the ready-to-fly model, the remote control system, the LiPo flight battery, a USB charger, 3 transmitter batteries and instructions. The age marking is 12 years and up. Indoor sessions suit the Toxic Spider 340 especially well, whether the focus is on learning steady hover control in a living room or linking smooth turns through open space in a hallway. With the charging gear and transmitter batteries already included, the set brings the key flying components together in one box for immediate RC action after charging.

RC carrying bags

Transport Bag Blue, RC bag, 55 x 30 x 25 cm

€32.99

A transport bag with 55 x 30 x 25 cm dimensions brings practical storage to RC sessions, club evenings and home organisation. The blue bag is sized for standard 1:10 RC cars and creates a tidy way to move a model together with the equipment that belongs with it, instead of splitting everything across separate cases. The nylon fabric is described as hard-wearing and keeps its shape, so the bag stays structured rather than slumping when it is only partly filled. That makes the opening easier to access when packing a chassis after a run or setting out tools before maintenance. Reinforced seams add support where the load pulls most, which matters when heavier RC gear is carried regularly. The format also suits dust-protected storage between driving sessions, with enough room to keep commonly used track equipment close to the model instead of stored separately. Carson blue and the printed Tamiya and Carson logos give the bag a clear workshop character that fits naturally into model-building and RC environments. Whether it travels to the race track, goes along to a model club meeting or stays on a shelf in the hobby room, the bag keeps RC equipment grouped, easier to handle and ready for the next outing.

RC carrying bags

Vehicle Carrying Bag, RC transport bag, 55 x 30 cm

€17.99

This blue vehicle carrying bag brings RC transport and storage into one clear format, with a 55 x 30 x 35 cm footprint sized to hold a model between workshop, car and running location. The nylon outer material is water-repellent and gives the bag a practical layer against splashes and damp conditions during routine handling. The carrying system is built around all-round nylon handles that wrap around the entire bag, rather than relying only on stitched side points. That construction supports the bag more evenly when lifted and helps maintain stability under the weight of the contents. The blue finish is paired with Tamiya and Carson logos, giving the bag a recognisable motorsport look that fits naturally into an RC setup. 14 years marks the recommended age. Used as transport to the track, as a storage place between sessions, or as a way to keep one vehicle separate from other workshop gear, the bag supports a more organised RC routine. Its rectangular shape also makes it straightforward to place in a car boot, on a shelf, or beside a workbench when the model is not in use.

RC tires & rims

Virus Race/Beat Warrior Wheels, model wheels

€36.99

Virus Race/Beat Warrior Wheels brings a focused replacement set to the workshop with 4 matching wheels made for the named Carson models. The set is aimed at model-building enthusiasts who keep running gear in working order and want a direct component match instead of trial-and-error parts selection. Because the product data identifies these wheels specifically for Virus Race and Beat Warrior, the set fits naturally into routine maintenance, repair after wear, or a rebuild that needs the correct wheel group on hand. The 4-piece format covers a full vehicle wheel change in one pack, which keeps the swap straightforward when all corners need the same component. With the age marking of 14 Years, the set sits in the hobby-focused side of the range rather than general toy use. The concise designation also makes this a practical shelf spare for existing compatible models. In a workshop setting, the wheel set supports quick replacement before the next driving session or during a larger overhaul of a used chassis. It also suits parts storage for hobby collections where compatible running components are kept ready for service work.

Pinions & gears

Virus Rocket 120 Diff, RC spare part, front rear

€49.99

The differential is one of the key working parts in an RC drivetrain, balancing torque between the driven sides while the transmission stays under load. This Virus Rocket 120 front and rear diff is built as a dedicated spare part for the model and brings the drivetrain back to a functional mechanical setup with a compact, preassembled unit. At the centre sits a red anodized housing, flanked by black outdrives and metal shaft interfaces that connect the assembly into the drive system. A large toothed gear on one side feeds power into the differential, while the bearing-supported ends are designed for controlled rotation inside the transmission layout. Visible hex socket screws secure the end plate, and the geared construction gives model-building enthusiasts a concrete replacement part for repair benches, rebuilds and routine drivetrain servicing. The 14 Years age marking is stated in the product data. This spare part suits workshop sessions focused on restoring drive function after wear in the front or rear transmission area. It also fits maintenance builds where a complete differential assembly is needed instead of replacing individual internal parts one by one.

Pinions & gears

Virus Rocket 120 middle diff drivetrain part

€53.99

The Virus Rocket 120 middle diff sits at the heart of the drivetrain, linking front and rear drive sections through a compact geared assembly. A large metal spur gear meshes into the transmission system, while the red anodized centre housing contains the differential mechanism and connects to black output shafts on both sides. Visible ball bearings support the rotating shafts and help the assembly run with controlled, even movement inside the drivetrain. The screw-fastened construction gives clear access to the unit for servicing, replacement or rebuild work when a running setup needs fresh transmission parts. The flattened shaft ends are shaped for coupling into the surrounding drive system, so the assembly is ready to slot into the matching vehicle layout. As a model vehicle spare part rather than a complete car, it focuses on one job: distributing rotational force through the centre of the transmission. In workshop use, this component fits naturally into repair benches, rebuild sessions and parts boxes for hobby-grade RC maintenance. It suits enthusiasts keeping a Virus Rocket 120 ready for the next run, whether the goal is restoring drive transfer after wear or replacing a key transmission assembly during a full drivetrain overhaul.

RC speed boats

Waveracer Jet, RC boat, 2.4GHz 100% RTR

€89.99

The Waveracer Jet brings compact RC boat action to calm water with a jet drive, a Type 390 brushed motor and LED lighting on the deck. At 442 mm long, 96 mm wide and 85 mm high, the hull combines a slim profile with a low weight of 599 g, giving the boat a lively, controlled feel across ponds, lakes and sheltered stretches of water. The 100% RTR format arrives pre-assembled with a 2.4 GHz remote control, a 7.4 V 2000 mAh Li-Ion battery, a USB charger, 3 x LR06 batteries and a boat stand. Integrated water cooling supports the electric motor during running, and the waterproof upper deck opens quickly through quick-release fasteners when access is needed. Water-protected electronics keep the key control components shielded during use, while the digital proportional system translates steering and throttle inputs with fine control rather than fixed steps. The boat reaches up to 20 km/h, runs for 12 minutes and charges in 3.5 hours. Ages 14+ marks the recommended age. On shallow water, the jet drive helps the boat stay capable where exposed propeller setups are less practical, and the rubber bow protector adds a plain physical buffer at the front during close approaches and recovery at the bank.

LiPo batteries

X4 Cage Autostart battery, 3.7V LiPo pack

€11.99

The X4 Cage Autostart battery brings the specified 3.7 V LiPo power pack and 220 mAh capacity needed for compact RC use into one small-format unit. Its silver pouch-cell format, red and black connection leads, and white 2-pin plug create a layout that fits neatly into model setups where every millimetre of space counts. With an energy rating of 0.81 Wh, this rechargeable battery is defined by clear electrical data rather than vague compatibility claims. The cable-mounted connector supports straightforward installation in matching systems, and the lightweight pack format suits small vehicle platforms and model electronics that rely on a compact power source. The visible warning tag attached to the lead marks a handling instruction directly on the battery assembly, keeping the operating note close to the connector itself. Batteries are not included beyond this listed battery pack. In use, the pack suits replacement duty for the X4 Cage Autostart and similar compact applications where the required voltage and connector format need to match exactly. For hobby benches, pit boxes, or regular running preparation, it adds a clearly specified LiPo option that keeps compatible RC equipment ready for the next session.

RC quadcopters

X4 Quadcopter 210, quadcopter, 2.4G 100% RTF

€39.99

The X4 Quadcopter 210 brings compact RC flying and quick stunt action into a 210 x 140 x 45 mm format that sits easily in one hand and lifts off with a light 44 g airframe. Its 3 speed settings, automatic altitude control and intelligent 6-axis gyroscope function create a stable base for short practice flights, low hovering passes and tighter turns in open spaces. The 2.4 GHz remote control system uses 4 frequency channels for steering inputs, while headless mode keeps the control logic easier to follow when the nose changes direction in flight. Aerobatic mode adds flips for more dynamic manoeuvres, and the Coming Home function returns the quadcopter toward the take-off point at the press of a button. The included set contains the ready-to-fly model, 2.4 GHz remote control system, 3.7 V 300 mAh LiPo flight battery, USB charger, 3 x AAA transmitter batteries, spare rotor blades and instructions. Flying time reaches 9 minutes, with speeds of up to 25 km/h. Age 8+ marks the recommended age for use. The compact dimensions and complete RTF setup suit quick sessions in the garden, at the park or across larger indoor areas where hovering, turns and flips can be practised in short bursts.

RC servos

XS Chassis Servo for RC Models 15 kg

€21.99

The XS Chassis 15 kg servo brings a defined control component to RC model builds where compact installation and solid actuating force matter. With its XS chassis designation and 15 kg rating, it suits layouts that need a servo sized for tighter chassis architecture while still delivering clear mechanical input through the steering or control linkage. Within an RC setup, the servo converts radio commands into physical movement at the chassis, making it a central part of how steering or other linked functions respond in use. The data identifies it as a servo for the XS chassis range, placing it in the core hardware area of model maintenance, replacement and tuning rather than in decorative accessories. This makes it relevant for rebuilds, repairs and planned upgrades where a defined force rating is part of the selection process. Batteries are not included. On the bench, the servo suits projects that call for a compact control unit matched to model hardware in the Models & Accessories field. It also fits routine spare-parts planning for RC collections where a dedicated chassis servo keeps running models ready for the next session.

Li-ion batteries

FE Line Replacement Battery, 7.4V Li-Ion Pack

€19.99

The FE line replacement battery combines 7.4 V output with 2600 mAh capacity in a Li-Ion pack built for compatible electric RC vehicle sets. With 19.24 Wh, it brings a clear energy figure to the setup and supports longer driving sessions when an older pack has lost punch. The battery is equipped with an XHP/TAM connector layout, matching the plug standard stated for the FE line and keeping the connection straightforward for the intended models. As a single replacement pack, it suits maintenance, backup use between runs, or a direct swap when the original battery no longer delivers the same runtime. The Li-Ion format makes this pack a focused choice for hobby users who want a defined voltage and capacity combination rather than a generic spare. In regular RC use, a second battery pack can keep driving sessions moving with less waiting between charges, while a fresh replacement helps bring stored models back into action. The stated 14 years+ age marking places this battery in the hobby segment, where connector type, voltage and capacity matter just as much as fit.  Warning! Not suitable for children under 14 years.

LiPo batteries

7.4V 5000mAh LiPo Battery, spare battery, XT90

€47.99

This 7.4 V LiPo spare battery adds a straightforward power option for compatible RC setups that use an XT90 connector. With 5000 mAh capacity, it is built as a replacement pack for models that need a 2S battery in this specification, keeping the focus on matching voltage, connector type and battery format. The pack is stated as suitable for all 2S and 4S models with an XT90 connector, which gives a clear compatibility reference for hobby use across matching Carson model ranges. The 60C rating shown in the product data adds another technical point for enthusiasts comparing replacement packs for current delivery. The battery is supplied as 1 spare battery, so it can step in for an existing pack or expand the rotation for longer sessions with compatible vehicles. As a LiPo battery, it belongs in setups designed for this battery type and the stated 7.4 V specification. In practice, this spare pack suits workshop shelves, race-day kit bags and regular running sessions where a charged replacement keeps a compatible model ready for the next run. A charger is required separately.  Warning! Not suitable for children under 14 years.

Li-ion batteries

XS Line Tuning Battery, replacement battery, 7.4 V

€19.99

The XS Line Tuning Battery brings a defined 7.4 V Li-Ion power source to compatible Carson Modelsport vehicles and combines 2600 mAh capacity with 19.24 Wh in a compact replacement format. Built as a battery pack with T-Plug and XHP connector, it is matched to the connection layout named for the XS Line. Its stated fitment covers the 1:10 XS Stadium Fighter 100% RTR in blue and orange as well as the 1:10 XS Offroad Fighter Cage 100% RTR in turquoise and rouge. That makes it a focused choice when an existing battery needs replacing or when a second pack is needed for the same compatible platform. The Li-Ion format defines the battery chemistry, while the 19.24 Wh rating adds a clear energy figure alongside the voltage and capacity data. The pack is also marked as fast-charging, with a maximum charging current of 1 C or 2600 mA. In workshop use, the connector combination helps keep the battery matched to the specified XS Line vehicles rather than a broad, uncertain range. For running sessions with the listed 1:10 models, the battery serves as a direct power component built around the exact voltage, capacity and connector details given in the data.  Warning! Not suitable for children under 14 years.

Li-ion batteries

XS-Line XHP/XT60 Li-Ion Battery Pack, 7.4V

€19.99

The XS-Line XHP/XT60 battery pack brings 7.4 Volt Li-Ion power into RC setups that rely on a compact, clearly specified energy source. With 2600 mAh capacity and XHP and XT60 connectors, it is built for compatible model-building electronics where the battery format and plug type need to match the vehicle layout. Li-Ion cell chemistry makes this pack a focused choice for hobby applications that call for rechargeable power in a manageable size. The 7.4V rating suits systems designed for that voltage, while the 2600 mAh capacity gives a concrete reference point when comparing runtime potential within compatible setups. The XHP and XT60 connector combination matters in practice because plug format determines whether the battery integrates cleanly with the existing wiring. Batteries are not included with many RC vehicles, so a separately chosen pack like this becomes a key part of getting a compatible chassis ready for use. On the bench, this battery fits into the preparation stage where voltage, capacity and connector standard have to line up with the electronics already in the model. At the track or on open driving surfaces, it serves as the power source that keeps a compatible RC vehicle running through each session.

Li-ion batteries

FE-Line Battery, RC battery, 7.4 V 1500 mAh

€21.99

The FE-Line battery brings a dedicated 7.4 V power source to compatible Carson RC setups, with 1500 mAh capacity and a Tamiya plug matched to FE Line use. The black Li-Ion pack with attached cables is built as a ready battery unit, making it a clear choice when an existing pack needs replacement or an extra charged unit is kept on hand for the next run. Its lithium-ion cell format combines the stated voltage and capacity in one compact pack, while the cable set includes the main power lead and an additional small connector integrated into the harness. The label identifies the pack as a high performance Li-Ion battery pack, and the visible charging information states a maximum charge current of 1C or 1500 mA. The pack is intended for Carson RC models in the FE Line, so the electrical specification stays aligned with that series rather than relying on a universal fit. Delivery includes the Accu-pack Li-Ion battery. In workshop use, the pack suits routine battery rotation between driving sessions, whether a model is being prepared for a fresh run or an older battery is being replaced with the same voltage and connector standard. The 14 years marking is stated in the product data, and the battery format fits naturally into hobby-focused RC maintenance and running setups.

Li-ion batteries

7.4V 500mAh LiIon Battery, spare battery, JST

€9.99

A spare battery keeps compatible RC vehicles ready for the next run, and this LiIon pack is built around the exact core figures that matter: 7.4 V, 500 mAh and a fitted JST plug connection. The compact battery format suits Carson RC Sport models that use this specified power source. The pack is listed as suitable for the 1:12 Glow Devil 2.4GHz 100% RTR red and the 1:12 Glow Rider 2.4GHz 100% RTR blue. In addition to the voltage and capacity, the battery carries a 3.7 Wh energy rating and uses rechargeable LiIon chemistry. The attached lead and connector provide the physical link to the vehicle's matching battery socket, which is the key point when replacing a worn or depleted pack. As a dedicated spare battery, it supports quick battery swaps between driving sessions without changing the vehicle setup. Kept charged and stored with the connector unplugged, a second battery pack can simplify preparation before track time or casual RC driving. For hobby benches, pit bags or shelf storage with compatible 1:12 models, this battery adds a straightforward replacement option when the original pack needs backup or renewal.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH/LiPo 4A, RC charger, 50W

€45.99

The Easy Charger NiMH/LiPo 4A brings fast, controlled battery charging to RC workbenches and race-day setups with 50 W output power and 4 selectable charging levels. Compact dimensions of 108 x 68 x 38 mm keep the unit easy to place beside tools, spares and running gear while charging sessions stay clearly focused on the battery in use. NiMH packs with 4 to 8 cells and LiPo batteries from 2 to 4S are supported, covering common drive-battery formats used in many radio-controlled models. The charging process can be set to 0.5 A, 1 A, 2 A or 4 A, which helps match the charger to different pack capacities instead of relying on a single fixed rate. Delta Peak cut-off is integrated for NiMH batteries, adding a defined stop point during charging. AC 100-240 V input allows connection to standard mains power across a wide voltage range. Included contents are the charger, power cable, XT60 to Tamiya adapter cable, XT60 to XT90 adapter cable and manual. At 231 g, the unit stays easy to carry between shelf, pit table and home setup, where compact size and broad battery support help keep RC sessions moving with less downtime between runs.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger Twin LiPo, charger, USB-C 2A

€27.99

The Expert Charger Twin LiPo USB-C 2A is built for RC setups that run on 7.4V Lithium Polymer 2S packs and need a compact charging station with 2 channels. Powered through USB-C, the charger connects with the included USB-C to USB-C cable and charges 2 batteries simultaneously through its twin layout. Each channel uses the XHP balancer plug system, matching 2S LiPo battery formats used across many RC applications. A maximum charging current of 2 x 2A and output power of 18W give the unit a clear role as a practical bench or travel charger for regular battery rotation. Automatic shut-off adds a defined end point to the charging process once the cycle is complete. The charger, USB-C to USB-C charging cable and instructions are included. With 110-240 Volt input compatibility, the charger fits neatly into hobby spaces where compact equipment and straightforward handling matter. The dual-channel format suits driving days with a spare pack ready, workshop charging between runs, or keeping 2 matching batteries prepared for the next session.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€109.99

The Reflex Wheel Pro 4 electric set brings wheel-style RC control, core onboard electronics and matched power components together in one package for 2.4 GHz model operation. With a 3-channel transmitter, a 4-channel mini receiver, a 6 kg CS6 servo and a 7.2 V 3000 mAh NiMH drive battery, the set covers the central functions needed to equip an electric RC vehicle for hobby use. The transmitter runs on 3.6 to 4.5 V and uses an ergonomically angled 4° steering wheel position for a natural hand layout during longer driving sessions. Channel 3 can be programmed as a switch or button function for a servo, adding another control option beyond steering and throttle. The receiver power supply supports 3.5 to 10 V without a BEC, and the nano receiver is waterproof for installation in models exposed to wet running conditions. A ball-bearing control unit supports precise steering input, while the LED battery status display keeps the charge state visible during setup and use. The included charger is designed for NiMH packs with 4 to 8 cells and delivers up to 2 A output power. Uni connector system compatibility for Futaba and Graupner-J/R broadens integration with existing RC equipment, making the set a strong base for electric model builds, upgrades and replacement radio installations. Age 14+  Warning! Not suitable for children under 14 years.

LiPo batteries

11.1V 4500mAh 60C LiPo Battery, RC battery

€62.99

This 11.1 V LiPo spare battery brings a focused power upgrade to compatible RC setups, pairing 4500 mAh capacity with a 60C discharge rating for model use. The XT90 plug connection keeps the fit aligned with vehicles that already use this connector, while the hardcase format shown in the product image suits the demands of RC running and transport. Beyond the headline figures, the pack is built around a rechargeable LiPo format with 49.95 Wh stated on the label and a maximum discharge current of 270 A. The product image also shows a white balance connector alongside the main XT90 lead, supporting balanced charging with suitable equipment. Charging data on the label states a maximum charging current of 4.5 A, giving experienced hobby users a clear technical reference for setup and handling. As a replacement battery, it is intended for all 3S and 6S models with XT90 connector as stated in the product data. In practice, this battery fits naturally into workshop shelves, pit bags and regular running sessions where a compatible RC vehicle needs a fresh power pack on hand. Age marking: 14 Years.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Demolisher JST-4 Li-Ion Battery, RC accessory

€15.99

The Demolisher JST-4 Li-Ion battery brings a focused power upgrade to compatible RC running with 7.4 V output, 500 mAh capacity and a compact rechargeable format built for model use. Its 3.7 Wh energy rating and shrink-wrapped pack layout keep the setup neat inside the vehicle while the red and black lead routes power through a JST-4 connection. This battery is designed as an accessory for the Demolisher and gives hobby users a clearly specified replacement or spare pack rather than a vague universal fit. The technical data names a maximum charging current of 0.5 A, making charger matching more precise during workshop prep. The pack is a Li-Ion type, so it suits RC setups where low pack weight and rechargeable convenience matter during repeated driving sessions. Because the battery is not included with every vehicle configuration, this separate pack can also serve as a practical second unit for rotation between runs. In use, the battery fits naturally into the rhythm of charging, connecting and heading back out with the model once the previous pack is depleted. It also works well as a bench spare for maintenance days, test drives and quick power swaps when a compatible Demolisher setup is already in service.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Tenzu, replacement battery, 7.4V Li-Ion pack

€19.99

The Tenzu replacement battery is specified as a 7.4V Li-Ion pack with 1200 mAh capacity, giving compatible RC vehicle setups the exact electrical format named in the product data. As a dedicated spare battery, it fits naturally into hobby use where one pack is in the model while another is prepared for the next session. Its ShortDescription identifies the pack directly as a Tenzu battery, while the replacement designation makes its role clear within an electric RC setup. The 7.4V voltage and 1200 mAh rating provide concrete reference points when matching the battery to the required system, avoiding guesswork around the power format. Because this is a battery-only offering, the focus stays on the core specification rather than bundled extras. The Li-Ion construction places it in the rechargeable battery category used across many modern RC applications. In practice, this battery suits the bench as a ready spare and the field as a quick swap option for compatible models. The 14 Years age marking is stated in the data, aligning this power component with hobby-oriented RC use rather than toy-style entry products.

LiPo batteries

3.7V 300mAh LiPo Flight Battery, RC accessory

€18.99

This 3.7 V 300 mAh LiPo Flight battery is built for compact RC applications that need a small rechargeable power source with clearly stated output. The 1.11 Wh rating, red and black lead wires, and white 2-pin connector make its electrical layout easy to identify at a glance. As an RC accessory, it focuses on the essentials: a lithium polymer cell, a wired connection, and a plug format suited to compatible small-scale electronics. The slim battery pack shown in silver foil with amber tape is shaped for installations where space is limited and cable routing needs to stay tidy. That makes it a practical replacement when an existing battery has reached the end of its service life, and a useful spare when one charged pack is not enough for the full session. The printed specification label keeps voltage and capacity visible during setup, charging, and storage. In use, the battery fits naturally into flying or driving sessions with compatible Carson RC models that require this format. Kept as a second pack in the workshop or field box, it helps keep compatible models ready for the next run once the first battery is back on charge.

Chargers & charging cables

Expert Charger NiMH/LiPo 4A, charger, 50W

€44.99

The Expert Charger NiMH/LiPo 4A brings compact charging control to RC bench setups with support for LiPo, LiHV, LiFe and NiMH battery types. With selectable current levels from 0.5A to 4A and a maximum output of 50W, it covers everyday charging tasks from smaller packs to higher-demand battery routines. Its cell support spans LiPo 2-4S and NiMH 5-8 cells, giving the charger a useful range for different vehicle classes and battery formats. The front-panel operation is built around clear mode and current selection, while the status LED keeps the charging state visible during use. Automatic shut-off completes the process once charging is finished, adding a practical control feature for regular workshop use. Input voltage from 110V to 240V allows connection to common mains supplies without extra complexity. Included components are the charger, a mains cable, 1 adapter cable XT60 to NiMH, 1 adapter cable XT60 to T-plug, and instructions. On the workbench, in the hobby room or alongside RC running sessions, this charger fits neatly into battery care routines where several pack types and connector formats need one compact charging solution.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow-plug Battery 1.2V 2000mAh Accessory

Nitro RC engines rely on a dependable ignition source, and this 1.2 V glow-plug battery is built for exactly that task. With a 2000 mAh capacity, it serves as a dedicated power unit for compatible glow igniters in model workshop and trackside use. As a models supplies accessory, the battery fits naturally into RC maintenance and running equipment where engine starting is part of the routine. The stated 1.2 V output defines the electrical specification clearly, while the 2000 mAh figure gives a concrete reference point for capacity when planning charging cycles and spare equipment. The compact format of this kind of accessory makes it easy to keep alongside other nitro starting gear without taking attention away from the main model itself. No batteries are included. Whether used as a replacement battery for existing glow-plug equipment or kept ready as a spare for longer driving days, this accessory supports the practical side of nitro model operation. The age marking is 14 years, placing it within hobby-focused RC use where technical accessories and engine preparation are a regular part of the session.

NiMH batteries

7.2V 3000mAh NiMH Race Battery, RC battery

€28.49

Built for RC use, this 7.2 V NiMH race battery combines a 3000 mAh capacity with a format suited to electric model applications. The pack is designed for RC vehicles and can also be used in other model building setups, giving hobby benches a practical power source for regular running and replacement needs. The nickel-metal hydride cell chemistry offers a rechargeable battery option for compatible systems, while the Tamiya connector system provides the matching plug format for suitable models and electronics. A maximum charging current of 3 A supports faster charging when used with an appropriate charger. The pack is also designed for high current discharge, which makes it suitable for applications that call for stronger power delivery under load. Age marking: 14 years. On the track, in the pit area, or as part of a prepared spare setup, the battery pack fits naturally into RC routines where charged packs need to be swapped and returned to service efficiently. For workshop use beyond cars, it also suits model building applications that require a 7.2 V rechargeable power source with Tamiya connection.

Li-ion batteries

7.4V 1300mAh Li-Ion Battery, RC accessory

€17.99

A 7.4 V Li-Ion battery pack with 1300 mAh capacity brings a clear, usable power specification to compatible RC model setups. With an energy rating of 9.62 Wh, this Carson RC Sport accessory is aimed at hobby applications that need a dedicated rechargeable pack rather than a disposable power source. The stated values make battery matching more straightforward when a model is designed for a 7.4 V pack, and the 1300 mAh capacity defines the pack within a compact RC power class. As an accessory in the powered vehicle range, it fits naturally into workshop shelves alongside running gear and charging equipment for electric model use. The rechargeable Li-Ion format supports repeated use across driving sessions, whether the battery serves as a replacement pack or as part of a regular rotation between runs. Product data states that batteries are not included. In practice, this kind of pack suits hobby users who keep compatible RC vehicles ready for the next outing or maintain a second power unit for less downtime between sessions. The clearly stated 7.4 V, 1300 mAh and 9.62 Wh figures give model builders concrete reference points when checking fit within an existing electric RC setup.  Warning! Not suitable for children under 14 years.

LiPo batteries

Easy Skydreamer LiPo Battery, spare battery 3.7V

€7.99

The Easy Skydreamer uses a compact 1-cell power pack, and this spare battery matches that format with 3.7 V, 150 mAh and a Molex connector. As a replacement part for models 500505035 and 500505036, it is built for the named aircraft rather than as a generic battery across unrelated RC ranges. Its LiPo construction and 0.55 Wh rating place it in the lightweight class used by small radio-controlled flyers, where low mass and the correct connector matter as much as voltage. The red and black leads run to a white 2-pin plug, giving the battery the connection layout shown for the pack itself. The set includes 1 spare battery, so the focus stays on the essential replacement component. Age marking: 12. In regular RC flying sessions, a matching spare pack helps keep the compatible Easy Skydreamer ready for another run after the original battery has been used. It also serves as a like-for-like replacement when the existing pack needs to be exchanged, keeping the electrical specification aligned with the intended model setup.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Li-Ion Battery Pack JST-4, RC battery, 7.4V

€17.99

This 7.4 V Li-Ion battery pack brings compact rechargeable power to compatible RC crawler models and adds a practical spare or replacement pack to the bench. With 1200 mAh capacity and 8.88 Wh, it supports electric vehicle setups that need a matched battery format for regular running sessions and planned swaps between charges. The pack uses a JST-4 connection and a 3-wire lead, as shown on the battery harness, for integration with compatible Carson RC Sport crawler systems. Its stated maximum charging current is 1.2 A, which matches the 1 C charging rate printed on the pack. The shrink-wrapped battery format keeps the cells grouped in a tidy rectangular pack that fits the compact layout typical of RC chassis installations. Charge before use is stated on the pack, and the connector should be unplugged for storage. In a hobby setup, this battery works well as the ready-charged pack kept beside the charger for the next run, or as the replacement power source that gets a crawler back on the trail after one pack is spent. The clearly marked voltage, capacity and charging data also make pack matching easier when organising compatible RC vehicle electronics.  Warning! Not suitable for children under 14 years.

RC servos

Servo CS-13, RC servo, 13 kg waterproof

€25.99

The Servo CS-13 brings regular-size dimensions, 13 kg torque and a waterproof design into one compact control component for RC models. Its 4.8-6 V operating range and JR connector suit common hobby electronics layouts, while the output shaft works with the included servo horns to transfer movement into steering, throttle or brake linkages. Inside the housing, metal gears handle the servo's drive path and support consistent motion under load. The set includes a cross horn, a single-arm horn, rubber grommets and a mounting screw, so different linkage positions and installation layouts can be matched to the model's setup. The 3-wire lead connects the servo to the control system, and the regular-size format suits many model applications where a standard servo footprint is required. The waterproof construction expands its use to builds that face wet ground or damp running conditions. In an RC car, the CS-13 can be installed for steering input or throttle and brake control, depending on the model layout. It also fits other hobby applications that use mechanical linkages and a JR plug connection, making it a practical choice for repairs, upgrades or fresh builds from age 14 years.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Tire Set Off-Road XL, wheels

€22.99

Loose dirt, gravel and broken ground call for a tread that can dig in, and this 1:8 Tire Set Off-Road XL brings that focus to RC buggy running with 2 complete wheels. Each wheel arrives glued and fitted with a foam insert, combining tyre, insert and rim in one ready-to-mount unit for 1:8 applications. The set is built around an off-road XL tread pattern with pronounced outer blocks and a knobby contact surface shaped for uneven terrain. Inside the tyre, the foam insert supports the carcass under load and helps the wheel keep its form as the buggy accelerates, brakes and changes direction on rough surfaces. The black multi-spoke rims use a 17 mm hex wheel hub standard, giving the set a clear fitment reference instead of a vague universal claim. The data names compatibility with CARSON 1:8 buggies in the Virus XL and Akuma lines. As replacement running gear, these complete wheels suit maintenance after tread wear, damage from hard terrain, or a setup change toward looser ground. Age marking: 14 Years. The pair format keeps front or rear axle changes straightforward when a buggy needs matching wheels for the next dirt session.

Chargers & charging cables

1:87 USB Four Point Charger Unit, charger

€39.99

The 1:87 USB Four Point Charger Unit brings a tidy charging hub to compact model fleets, with 4 charging outputs rated at 4.2 V / 50 mA each and a single 5 V / 1 A USB input. Set on a shelf, desk, or workbench, the station keeps several compatible miniature vehicles gathered in one clearly organised place instead of spreading chargers and cables across the hobby area. Its four-point layout is built for enthusiasts who rotate multiple 1:87 models between use and display. The charging station is included, along with the instruction manual, and the USB-powered format keeps the setup straightforward when a standard USB source is available. The 1:87 designation makes it a focused accessory for small-scale vehicle collections rather than a general charger for mixed formats. With several charging positions arranged on one base, the station supports a more structured routine for storing, charging, and preparing compatible models. In a collection cabinet, it creates a dedicated service point for miniature vehicles between runs. On a hobby bench, the compact unit helps keep compatible 1:87 models together and ready for the next session, whether the fleet includes a single favourite vehicle or several regularly used models.

RC chassis & attachments

Antenna Tube Black 4Pcs Model Accessory

€3.29

Antenna Tube Black 4Pcs is a model accessory set for RC vehicle setups that need a simple, clean guide for antenna routing. The pack contains 4 matching black antenna tubes, making it suitable as replacement stock for maintenance, rebuilds or fresh installations on compatible models. The slim tube format supports upright antenna placement and helps keep the wire path clearly defined on the vehicle. The black colour sits unobtrusively against many body shells and chassis layouts, which suits builds where a restrained, technical look matters as much as function. With 4 pieces in one pack, the set also covers repeated workshop use when several vehicles need the same small fitting. In day-to-day hobby use, antenna tubes are often the kind of part needed at short notice after repairs, body changes or general wear. This set fits naturally into spare-parts storage for model benches, pit boxes and maintenance kits where small RC fittings need to be ready when a compatible vehicle is being prepared.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger Allrounder, charger, 2A LiPo NiMH

€29.99

The Expert Charger Allrounder brings compact charging control to RC hobby setups with support for lithium and NiMH battery packs, 2A maximum charging current and 16W maximum output power. Its 100-240V input voltage allows connection to common mains supplies, while the compact charger format keeps the bench setup focused on the charging task itself. The XHP balancer plug-in system is designed for lithium packs and works with the balancer function to support gentle charging across 2-3S configurations. NiMH packs are also covered, with compatibility for 4-8S battery types, so one unit can serve different power systems used in model driving. A multifunction LED layout and 3 control buttons on the charger provide clear operating feedback during the charging process. The included charging cable with Tamiya plug connects the charger to compatible battery packs, and instructions are included in the contents. Between driving sessions, the charger fits naturally into the regular rhythm of RC use, whether a single pack needs topping up before the next run or several compatible packs are charged in turn. Automatic shutdown ends the process when the battery is fully charged, giving each charging cycle a clear finish for workshop and trackside preparation.  Warning! Not suitable for children under 14 years.

LiPo batteries

LiPo LiIon Safety-Bag, battery storage pouch

€9.99

LiPo and LiIon battery packs are a fixed part of many RC and model-building setups, and this LiPo/LiION Safety-Bag gives them a dedicated place in the workshop. The compact rectangular format, silver outer surface and flap closure create a clear storage solution for battery handling between charging sessions, transport and shelf storage. The pouch is designed around a simple, practical task: keeping battery packs together in one enclosed bag instead of loose among tools and model parts. Black edging reinforces the shape visually and gives the bag a defined outline that is easy to spot in workshop gear. Its flexible construction suits everyday hobby use, whether battery packs are being moved to the track, stored in a pit box or set aside on a workbench after a run. The closed flap keeps the contents covered, and the compact proportions make the bag easy to place alongside chargers, cables and other RC equipment. In model sport routines, a dedicated battery bag helps keep preparation more organised before driving sessions and tidier once the run is over. The plain silver finish and clearly printed LiPo Safety Bag marking give the pouch a functional workshop character that fits naturally into RC and model-building environments.  Warning! Not suitable for children under 14 years.

RC remote controls

RA 3Ch Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€59.99

The RA 3Ch Reflex Wheel Pro 4 brings 2.4 GHz control, a 4-channel mini receiver and a 5 kg CS5 servo into one radio set built for RC model driving with direct, adjustable command at the wheel. With a pistol-grip transmitter, side steering wheel and trigger throttle, the layout follows the handling style widely used in ground vehicles and keeps key functions close at hand. Channels 1 and 2 work fully proportionally, so steering and throttle inputs can be fed in smoothly rather than only in fixed steps. Servo reverse for both channels changes the direction of travel response when a model needs the opposite movement, and separate trim for throttle and steering helps straighten running behaviour without mechanical changes. Dual rate on both channels limits servo travel and can reduce speed response, which is useful when matching control sensitivity to different chassis layouts. Channel 3 is programmable as a switch or button function, adding another control option for compatible RC installations. The receiver accepts a power supply up to 6 V without a BEC and uses a Uni connector system for Futaba and Graupner-J/R compatibility. A waterproof nano receiver format suits compact installations, while the LED battery status display gives a clear visual check on transmitter power. The set includes the transmitter, 4-channel mini receiver, 5 kg CS5 servo and instructions. 4 AA batteries are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Start Electric Set, RC set, 1:10

€69.99

Built for 1:10 TAMIYA RC kits, the RC-Reflex Start Electric Set brings the key electronics for vehicle operation into one coordinated package. The set combines a compact 3-channel 2.4 GHz transmitter with matching receiver, a CS-3 steering servo, a 7.2 V 2500 mAh NiMH driving battery, a USB charger and 4 x AAA transmitter batteries, creating a clear starting point for hobby builds that still leaves room for precise setup work. The pistol-grip transmitter uses a wheel-style steering control and trigger throttle layout that suits RC car handling, while 2 fully proportional channels respond gradually rather than in fixed steps. Trim functions for accelerator and steering help correct running behaviour, and the servo reverse function allows the steering direction to be switched when the installation calls for it. A fail safe system adds a concrete control safeguard, and an LED battery status display keeps the charge state visible during operation. The included 3-channel receiver provides the matching vehicle-side link for the 2.4 GHz system. For workshop bench setup, club track preparation or the first runs after a fresh kit build, the set covers the central radio and power components in one box. The 14 Years marking fits the hobby-oriented character of the set, especially where model builders want a straightforward electronics package for getting a 1:10 chassis ready for driving.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex Wheel Pro 4 WP Receiver, RC 4-Channel

€29.99

The Reflex Wheel Pro 4 WP is a compact 2.4 GHz 4-channel receiver built for RC models that need dependable control hardware in a small format. With a 35 x 30 x 13 mm housing and a weight of about 11 g, it suits installations where available chassis space is tight and electronics placement matters. The 4.8-8.4 V power range supports integration into common RC vehicle electrical setups, while the clearly arranged channel ports keep the connection points easy to identify during installation. The receiver layout provides connections for CH1, CH2, CH3 and AUX, giving model builders a practical basis for steering, throttle and added functions within one compact unit. An external antenna wire extends from the housing for radio reception, and the included plug supports binding or setup functions as shown in the supplied configuration hardware. The 2.4 GHz system suits modern RC control environments where clean component organisation and straightforward wiring are part of a well-planned build. In workshop use, the small footprint helps when fitting electronics into narrow radio boxes or compact interior layouts. For replacement, upgrade or fresh model projects, this receiver adds a focused control component that can be integrated without taking over the chassis layout. The age marking is 14 years and over.

RC tuning parts

Tuning set TT-02, chassis upgrade set

€55.99

The TT-02 platform has become a familiar base in RC touring builds, and this tuning set targets the areas that shape how the chassis drives on the road. Made for the TAMIYA TT-02 chassis, the set brings together 16 ball bearings, 4 short oil dampers, a 68T high-speed gear set and a 25T steel pinion to sharpen the response of key moving systems. The bearing set replaces friction-heavy rotating points with smoother-running metal bearings, which supports lower consumption and longer running time. The short C.V.A. oil dampers add oil-controlled suspension action, so wheel movement is managed with more precision when the chassis loads up through bends and direction changes. The 68T gear and 25T steel pinion alter the gearing for a faster setup, while the steel pinion adds a hard-wearing drive component at the motor shaft. The product data specifies that the 25T motor pinion is used only with the 68T gear, and the motor is mounted in position H for 23 t. On a TT-02 road build, these changes work together where they matter most: steering inputs feel more controlled, the chassis sits more composed through corners, and tyre abrasion is reduced during regular running. Age marking: 14 Years. The TT-02 chassis is not included.

RC electric motors & controllers

Viper Micro Marine, speed controller, waterproof

€40.99

The Viper Micro Marine speed controller brings compact electronic control to RC boat setups with a 26 x 25 x 9 mm format, 23 g weight with cable, and a fully waterproof design for marine running conditions. Its layout is built around direct installation, with wires already attached and an external on-off switch included on the harness. This controller is specified for 5 to 10 NiMH cells and an operating voltage of 6 to 12 V, making it suitable for a wide range of compact electric marine configurations. The motor limit of 10 Turn defines the drive range it is designed to handle, while the 1.0 KHz frequency and 1.5 A BEC output round out the technical package. Brake and adjustable braking point are not provided here; the focus stays on forward and reverse control with a simplified operating concept. All adjustments are handled through one setup button, keeping programming concentrated in a single control input. In use, that combination suits hulls where installation space is limited and wiring needs to stay orderly around battery, motor and receiver connections. The waterproof build, integrated control protections and compact dimensions make it a focused choice for electric marine models that need a small controller with clear setup logic.

Li-ion batteries

XS-Line Li-Ion Battery, RC battery, 7.4 V

€24.99

Built for compact RC power setups, this XS-Line Li-Ion battery combines 7.4 V output with 1500 mAh capacity in a shrink-wrapped pack sized for compatible 1:10 Carson XS chassis. The T-Plug connection gives the pack a direct link to the vehicle's electronics, while the XHP balancer adds the charging interface needed for Li-Ion battery maintenance. The pack label states 11.1 Wh, adding another clear reference point when matching voltage and capacity to an existing setup. As a rechargeable power source, it suits both replacement use and a second-pack role for longer workshop or track sessions with a compatible model. The Li-Ion format keeps the specification focused and easy to match against vehicle requirements in the XS-Line range. Basic text names compatibility with the 1:10 XS-Chassis and references Stadium Fighter and Offroad Fighter Cage variants within that line. A charger is required separately. In practical use, this battery fits the routine of charging, installing and swapping packs between runs on a compatible RC vehicle. The combination of 7.4 V, 1500 mAh, T-Plug and XHP balancer gives hobby users the key connection and power details at a glance when selecting the right pack for the bench or the field.  Warning! Not suitable for children under 14 years.

RC brushless motors

1:10 Dragster Turbo Program Card, ESC accessory

€14.99

The 1:10 Dragster Turbo Program Card brings direct ESC setup control to the workbench, letting key drive parameters be changed through a compact wired unit instead of relying on menu-heavy programming steps. Its black housing, printed setting layout and BEC-style connection create a clear tuning tool for RC vehicle electronics. The card is designed to configure several core controller functions. Low-voltage shutdown can be set to 3.1 V, 2.9 V, 2.7 V or 0 V, while separate rows on the card cover acceleration, maximum braking force, maximum reverse force and response behaviour. Visible programme markings and status indicators on the face help keep each selected value easy to track during setup. Dedicated Programme and Reset controls support quick changes when testing different controller responses. Batteries are not included. In use, the card suits workshop tuning before a run as well as between sessions when a different brake balance, reverse setting or throttle reaction is needed. Age marking: 14 years. As an RC accessory for 1:10 applications, it adds a practical way to refine how an electric model reacts on the track or during general driving.

Li-ion batteries

7.4 V Race Battery, RC battery, 3000 mAh

€38.99

A 7.4 V Li-Ion race battery brings dependable rechargeable power to 1:10 RTR model driving, with 3000 mAh on board for sustained running and a compact pack shape that suits hobby vehicle layouts. The hardcase format and attached leads give the battery a clean, workshop-ready setup for regular use in electric RC applications. The pack uses a Tamiya plug as the main connection, making it a practical match for compatible RTR systems that rely on this connector standard. Its Li-Ion cell chemistry combines the stated 7.4 V output with a 3000 mAh capacity in a rechargeable drive pack aimed at model sport use. The rectangular case keeps the battery block contained in a defined footprint, while the cable layout supports clear routing inside a chassis. As a replacement pack or an additional battery for driving sessions, it adds a straightforward power option for compatible 1:10 electric models. In the workshop, the battery suits routine prep before a run, whether a chassis is being readied for casual driving or kept charged as a spare between sessions. On the track or in open driving areas, the combination of Li-Ion chemistry, 7.4 V output and 3000 mAh capacity supports consistent RC use with a connector format already common in RTR setups.

RC servos

CS-5 Servo 5kg/JR, servo, 50 Ncm control

€11.99

The CS-5 Servo 5kg/JR brings controlled movement to RC installations with 50 Ncm torque, 0.17 sec/60° transit speed and a regular-size format that fits a wide range of model sport layouts. In a steering system, throttle linkage or another actuated function, the servo converts receiver commands into precise shaft movement through its Graupner/JR connector setup and 4.8-6 V operating range. Its housing measures 38.5 x 19 x 32 mm and weighs 39 g, which helps when planning installations in tighter chassis sections or compact equipment bays. The side mounting tabs allow the servo to be fixed into the model structure, while the output shaft accepts servo horns for linkage connection and throw setup. This makes the unit suitable wherever a model needs repeatable control input rather than free-running drive power. The electrical specification also makes it a practical match for common RC receiver-powered systems that work within the stated voltage window. In use, the CS-5 can take on steering duties in an RC car, move a control surface in another model format, or operate a mechanical linkage where measured travel and response time matter. The combination of regular-size dimensions, JR connection standard and clearly stated performance data gives hobby builds a solid basis for selecting the right control component.  Warning! Not suitable for children under 14 years.

RC remote controls

RA 4Ch Reflex Wheel Pro 4, RC transmitter

€59.99

The RA 4Ch Reflex Wheel Pro 4 2.4GHz LCD brings a compact pistol-grip layout, 4-channel control and a clear display into one radio system for RC driving with precise steering and throttle input. Its angled 4° steering wheel position, ball-bearing control unit and carbon structure shape a focused handling feel at the transmitter itself while the blue-lit LCD keeps setup values readable at a glance. Two channels work fully proportionally for finely graded control, while channel 3 can be programmed as a switch or button function and channel 4 uses a 3-level switch. The transmitter operates at 3.6-4.5 V, and the receiver accepts 3.5-10 V without a BEC, which broadens the range of compatible model installations. A failsafe function adds a concrete control safeguard if signal is lost. The system also stores settings for up to 15 models, which helps keep separate configurations ready for different vehicles instead of resetting trim and response values each time. Included are the 4-channel 2.4 GHz transmitter, a 4-channel mini receiver and instructions. 4.8-6 V operation and the compact receiver format suit hobby setups where steering, throttle and auxiliary functions need one coordinated radio system for track driving, car park sessions or workshop tuning between runs.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Receiver Reflex Wheel PRO 3, RC receiver, 2.4 GHz

€22.99

The Receiver Reflex Wheel PRO 3 2.4 GHz is built as a dedicated replacement receiver for the Carson Reflex Wheel PRO 3 RC system, bringing a compact 4-channel layout into compatible model vehicle electronics. Its dark housing measures 35 x 25 x 10 mm, making it easier to place the unit in confined radio boxes or chassis compartments where space is limited. The connector side is arranged with clearly printed CH1, CH2, CH3 and CH4 markings, so steering, throttle and extra control functions can be assigned in a straightforward layout. A 2.4 GHz operating frequency supports modern radio control use, while the 6 to 11 V input voltage range matches common RC system requirements for this class of receiver. The F/S Set function adds a defined failsafe setting, allowing a stored control position when signal is interrupted. As a replacement component, it suits repairs, maintenance work and the return of an existing Reflex Wheel PRO 3 setup to running condition. In workshop use, the compact format helps when replacing a receiver in a crowded chassis with limited installation room. On the bench or at the track, the 4-channel configuration supports model vehicles that need dependable control routing for core driving functions and added features.

NiMH batteries

4.8V 400mAh RC-Bau Mini-TAM, battery pack

€14.99

This 4.8 V 400 mAh NiMH battery pack brings a compact rechargeable power source to RC-Bau Mini-TAM setups, with a rectangular 4-cell layout, red and black lead wires, and a white plug ready for the matching connection. Its format suits smaller RC construction and hobby vehicle compartments where a neatly sized pack matters as much as the electrical rating. The NiMH chemistry makes it a rechargeable option for repeated running sessions, while the 4.8 V output and 400 mAh capacity define the pack's role clearly within compatible RC systems. The shrink-wrapped cell block keeps the cells grouped in one unit, and the pre-fitted cable lead avoids the need to source a separate wired pack for the same voltage class. As an accessory in the electric and battery car set range, it fits naturally into model-building benches where replacement or spare power packs are part of regular use. In practice, this battery pack suits hobby sessions that rotate between charging, fitting, and driving, especially when a compact RC construction model needs a matching rechargeable pack kept ready between runs. A charger is required separately, and compatibility with the vehicle connection and battery compartment should be checked against the intended model.

LiPo batteries

Cyber Drone LiPo Battery, replacement battery, 3.7V

€9.99

More airtime starts with the right power source, and this 3.7 V lithium-polymer replacement battery is made specifically for the Cyber Drone series. With 600 mAh capacity, compact 49 x 22 x 7 mm dimensions and a weight of 14 g, it fits the flight setup without adding unnecessary bulk during take-off, hovering and directional changes. The battery is designed for several Cyber Drone versions named in the range, including Police, Space Taxi and the green, orange and red variants. Its factory-installed JST connector keeps the connection straightforward when a fresh battery is needed between flights. As an original replacement battery, it serves as a practical spare for keeping one pack on charge while another is ready for use. The lithium-polymer format supplies the voltage required for the drone's regular operating characteristics, supporting consistent power delivery across repeated sessions. In use, a charged spare battery helps keep flying sessions moving with shorter interruptions at the charging station. Age recommendation: 14 years and up. This makes the battery a useful addition to the Cyber Drone setup for longer practice runs, repeated manoeuvres and more time in the air with the same model.

Light & sound

LED Light-Set NEO FIGHTER, RC accessory

€14.99

This LED Light-Set brings a Tamiya DT03 or TT02B buggy into low-light action with a front and rear lighting layout made for the NEO FIGHTER and SAND SCORCHER. The set uses 2 white LEDs at the front and 2 red LEDs at the rear, creating a clear visual contrast that stands out on darker indoor tracks and evening running sessions. The connection is straightforward: the black plug goes into a free socket on the receiver, and the inline switch controls the light set directly on the vehicle. At the front, the round headlight mounts are positioned over the bumper bracket after the screws are released and the wishbone mounting bracket is removed. At the rear, the light unit attaches beneath the spoiler either with the supplied screws or with the adhesive pad. For screw mounting at the rear, the required hole spacing is 71 mm. Cable ties are included to route the wiring along the chassis and keep the installation tidy. Once fitted, the illuminated front section throws visible light ahead of the buggy, while the red rear LEDs sharpen the model's outline from behind during driving or static display. Age 14 Years. A receiver with a free socket is required on the compatible model.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Multi-Charger Cable 8in1, charger cable, XT-60

€10.99

The Multi-Charger Cable 8in1, XT-60 brings 8 charging connections into one compact harness for RC and model-building setups. An XT-60 connector forms the input, while the split lead layout branches to crocodile clips, Futaba, BEC, T-Plug, XT90, XT60, Tamiya and Mini Tamiya for broad charger-to-battery compatibility across common hobby formats. The harness layout keeps the different connector ends available in one place instead of spreading separate adapters across the workbench. Red and black power leads make polarity routing easy to follow during charging tasks, and the central heat-shrink bundling keeps the cable group together while the required connector is selected for the battery in hand. This makes the cable a practical link between chargers and packs that use different plug standards in the same RC collection. On the bench, the cable suits charging sessions that move between several battery types without swapping a separate adapter each time. The 14 Years age marking places it in hobby-oriented model and RC environments where connector variety is part of regular workshop use.  Warning! Not suitable for children under 14 years.

NiMH batteries

RC Sport Race Battery, 4.8V 400mAh, NiMH pack

€14.99

Compact rechargeable power is often the missing link in a well-matched RC setup, and this RC Sport Race Battery brings that role into a small 4.8 V NiMH pack with 400 mAh capacity. The green shrink-wrapped format, attached red and black leads, and JST connector create a clear, practical layout for compatible model electronics. The nickel-metal hydride cell pack is built for RC and model sport use where a rechargeable battery is needed in a compact format. Its 4.8 V output suits electronics designed for that voltage, while the 400 mAh rating supports smaller onboard applications without adding unnecessary bulk. The fixed cable lead is already attached to the pack, so the connection path stays direct between battery and matching system. The JST plug gives the pack a defined connector standard for compatible equipment, which matters when fitting batteries into tighter chassis or electronics spaces. This battery pack fits naturally into hobby benches stocked for maintenance, charging, and regular vehicle preparation. It can serve as a practical replacement pack or as an extra rechargeable unit for compatible RC models and electronics that use a JST connection and a 4.8 V NiMH format. Minimum age: 14 years

Remote-controlled systems

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€75.99

The Reflex Wheel Pro 4 brings 2.4 GHz control, LCD-based setup and a compact 4-channel layout into one radio set for model vehicle builds and upgrades. A wheel-style transmitter, 4-channel mini receiver and 6 kg servo with metal gearbox form the included control package, giving hobby projects the core hardware needed for steering, throttle and auxiliary channel operation. The transmitter runs on 3.6-4.5 V and offers 2 infinitely variable fully proportional channels for precise input, plus 2 switchable channels for added functions. Channel 3 can be programmed as a switch or button function for a servo, while channel 4 uses a 3-level switch. A ball-bearing control unit supports accurate steering input, and the steering wheel sits at a 4° angle for a more natural hand position during longer driving sessions. LED battery status indication keeps the transmitter power level visible at a glance. For setup work, the system adds trim for throttle and steering, servo reverse on channels 1 and 2, and dual rate to limit servo travel or reduce speed response. Expo and ABS functions expand tuning further for different vehicle layouts and track conditions, while 15-model memory helps keep settings organised across multiple RC machines. The waterproof nano receiver broadens installation options in demanding vehicle builds.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel Pro 4, RC transmitter, 2.4 GHz

€69.99

The Reflex Wheel Pro 4 brings 2.4 GHz control, LCD setup access and a wheel-style layout into one radio system built for RC model use. With 4 channels, 2 included mini receivers and a transmitter operating voltage of 3.6-4.5 V, it covers steering, throttle and added switching functions in a compact setup for multiple vehicles. Channels 1 and 2 work as fully proportional controls, giving fine input over steering and throttle instead of fixed steps. Channel 3 can be programmed as a switch or button function for a servo, while channel 4 uses a 3-level switch for added onboard functions. Servo reverse for channels 1 and 2 changes direction of travel when a model layout requires it, and the receiver power supply range of 3.5-10 V supports installation in different RC configurations without a BEC. The ball-bearing control unit supports precise steering input, while trim, dual rate, expo and ABS functions allow response to be adjusted to the model and surface. The LCD screen and LED battery status display keep key settings and charge information visible during setup and running. A failsafe function adds a concrete control feature for signal loss situations, and 15-model memory stores settings for different vehicles. The Uni connector system for Futaba and Graupner-J/R broadens compatibility across existing RC equipment. 4 AA batteries are required separately.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex Wheel PRO3 Receiver, RC receiver, 2.4GHz

€24.99

The Reflex Wheel PRO3 receiver brings 2.4 GHz control, 4 channels and a water-resistant design into a compact RC component built for model installations where space and dependable signal handling both matter. As a replacement receiver for the Carson Reflex Wheel PRO3 radio system, it keeps the layout focused with clearly marked CH1, CH2, CH3 and CH4 connections plus a dedicated F/S Set control on the case. Its 35 x 25 x 10 mm dimensions make it easy to position inside many RC chassis, while the 6 to 11 V input range suits common onboard electronics. The labelled connector side helps keep steering servo, throttle control and further channel functions clearly assigned during installation. A visible antenna lead extends from the housing for radio reception, and the marked switch area adds direct access on the unit itself. The receiver is intended for the Reflex Wheel PRO3 system, making it a straightforward replacement when an existing setup needs a matching 4-channel unit. In use, the compact format suits touring cars, buggies, crawlers and other radio-controlled models where electronics space is limited. The water-resistant build and failsafe setting support controlled running in changing track and outdoor conditions, from workshop rebuilds to regular driving sessions.

RC tires & rims

1/10 Super Gripp, wheel set, 4WD RC wheels

€25.79

The 1/10 Super Gripp 4WD wheel set brings a ready-matched running setup to RC off-road models, combining 4 wheels with an assertive square-pin tread pattern and white dish rims. The mounted design gives 1/10 4WD chassis a direct route to fresh rolling gear, with the black tyres and bright rims creating the classic buggy look seen at dirt tracks and loose-surface runs. Across the tread face, the closely packed pin blocks create many contact points that can dig into softer ground and support controlled acceleration and braking on changing terrain. The 4WD layout note makes the set relevant for models that need equal wheel equipment at all 4 corners, rather than a mixed front and rear arrangement. In use, a full 4-piece set also helps keep wear, grip response and visual finish aligned across the chassis. The white dish wheel style adds a familiar competition-inspired appearance while keeping the focus on the tyre profile and contact patch. Whether the task is replacing worn running gear before the next session or keeping a spare set ready in the workshop, this wheel set covers the complete vehicle in one pack. On compacted dirt, loose track sections or general off-road running areas, the tread pattern is built around traction-focused RC driving rather than smooth on-road rolling.

RC tires & rims

1:10 Buggy-Tire/Wheel Set, RC wheels, all terrain

€20.99

A 1:10 buggy gains a clear off-road focus with this Buggy-Tire/Wheel Set in an all-terrain layout, combining black tyres, chrome rims and a 2+2 wheel arrangement for front and rear fitment. The mounted wheel format brings the running gear together in one ready-prepared set and gives hobby benches a quick route to a fresh buggy setup. The tread pattern uses pronounced blocks that suit loose and uneven ground, where a buggy needs defined contact points rather than a smooth on-road surface. The rim design shown in chrome adds a technical contrast against the black tyre finish, giving the vehicle a sharper race-style appearance once fitted. As a wheel and tyre combination rather than separate loose parts, the set also reduces preparation steps when replacing worn running gear or keeping an extra set ready for changing conditions. The 1:10 format makes it a relevant choice for model-building enthusiasts working within that scale class. On gravel tracks, compacted dirt or rough hobby terrain, a fresh wheel set can change how a buggy presents itself and how quickly it is prepared for the next outing. Age 14 Years. This set suits workshop stock, replacement use and visual upgrades for compatible 1:10 buggy builds.

NiMH batteries

1:16 Tractor JST, NiMH battery pack, 4.8V

€15.99

This 1:16 Tractor JST battery pack is built as a direct power unit for compatible RC tractor models using a 4.8 V NiMH setup. The 400 mAh format and JST connector keep the specification aligned with the stated application, making it a straightforward match where the model calls for this exact battery type. As a rechargeable NiMH pack, it fits hobby routines that rely on swap-ready battery sets for repeated driving sessions. The stated maximum charging current is 400 mA, and the pack is supplied as a dedicated battery rather than a universal adapter or mixed accessory set. That makes the key details clear at a glance: 4.8 V voltage, 400 mAh capacity, NiMH chemistry and JST connection. The battery is not included with the vehicle, so it serves as a separate replacement or additional power pack for compatible models. In regular RC use, a matching spare battery helps keep a 1:16 tractor ready for the next run after charging. It also suits workshop shelves where connector type and battery format need to stay consistent across an existing compatible setup.

NiMH batteries

4.8V 500mAh NiMH Battery, replacement battery

€14.99

This 4.8 V 500 mAh NiMH battery pack is built as a replacement power source for compatible Carson RC vehicles and connects through a JST plug. The compact pack format with attached red and black leads suits battery-compartment installation in models that use this exact voltage, capacity and connector layout. NiMH technology makes this battery a practical match for the specified vehicle electronics, while the 500 mAh rating supports the intended power supply setup of the compatible models. The pack is listed for the Carson FlixBus and the Carson 1:14 Fire brigade, so hobby users can keep an existing model in service with the stated battery type instead of searching through unsuitable formats. The included contents are focused and clear: 1 NiMH battery pack. In use, the battery connects inside the vehicle through the JST lead and sits in the battery bay shown for underside access on compatible models. It suits battery replacement when the original pack has reached the end of its service life or when a matching spare is needed for continued RC operation.

NiMH batteries

6V 3000mAh NiMH RX-Battery TAM/BEC Pack

€24.99

This 6V RX-Battery with 3000 mAh capacity is built for RC model setups that need a dedicated receiver power source. The NiMH pack format and TAM/BEC connection make it a focused choice for compatible electronics, with attached leads ready for installation in model sport applications. As a rechargeable battery pack, it supports repeated charge and discharge cycles in regular hobby use. The 6V output suits receiver duties where a separate onboard supply is required, while the 3000 mAh rating provides a substantial reserve for longer sessions. The black shrink-wrapped construction keeps the cell pack bundled in a compact form, and the integrated cable set combines the main connector with an additional small plug visible on the pack. Batteries are not included. In the workshop, the pack fits naturally into maintenance, rebuild and replacement routines for compatible RC vehicles. At the track or during club running sessions, it serves as a dedicated power component for onboard electronics where a 6V NiMH receiver pack with TAM/BEC connection is specified.

NiMH batteries

7.2V 4000mAh Race Battery, RC battery, NiMH

€35.99

Built around a 7.2 V NiMH cell pack and a 4000 mAh capacity, this race battery brings a solid power source to RC vehicles and other model building applications. The Tamiya connector system gives the pack a clear fit for compatible setups, while the compact multi-cell format with attached leads keeps the connection layout straightforward inside hobby chassis. The nickel-metal hydride design suits users who prefer a rechargeable pack for regular workshop and track use. A maximum charging current of 4 A supports quick charging within the stated specification, and the pack is also designed for high current discharge when the application demands stronger output under load. That combination makes it suitable not only for RC cars, but also for other model building uses that rely on a 7.2 V battery format and matching connector type. The wired plug connection and wrapped pack construction keep the electrical layout focused on practical installation in compatible models. In use, the battery fits naturally into driving sessions, maintenance routines and general bench preparation for hobby models. It also works well as a replacement or spare pack for compatible RC setups where 7.2 V output, 4000 mAh capacity and a Tamiya connector are the required battery specifications.

NiMH batteries

7.2V 700mAh NiMH Battery Pack, RC accessory

€17.99

This 7.2 V 700 mAh NiMH battery pack brings a straightforward power solution to compatible RC vehicle setups, with a compact shrink-wrapped format and JST connection that suits hobby use. The rechargeable pack is built for electric and battery-powered car applications, making it a practical choice when a fresh battery is needed for the next driving session. The NiMH cell format offers a familiar power source for many RC models that use this battery type, while the 7.2 V rating and 700 mAh capacity define the pack's electrical specification clearly. Red and black leads run from the pack to the black JST plug, helping keep the connection layout easy to identify during fitting. The pack format shown in the product data is shaped for installation in an RC vehicle battery compartment, where the cable can be routed to the vehicle connector. Batteries are not included with the main vehicle where separately required, and this accessory is supplied as the battery pack itself. In day-to-day hobby use, the pack works well as a replacement battery for a compatible model or as an extra rechargeable unit kept ready between runs. For model-building enthusiasts running electric RC vehicles, that means less downtime at the bench and more time focused on setup, charging rotation, and driving.

Li-ion batteries

7.4V 2200mAh Race Battery, RC battery, 1:10

€36.99

This 7.4 V Li-Ion race battery brings dependable drive power to compatible 1:10 RTR models, with 2200 mAh capacity matched to regular RC running. The hardcase pack, main power lead and compact cable layout create a clean, workshop-ready setup for hobby sessions at the bench and on the track. The battery is equipped with a Tamiya plug for direct use with compatible vehicles that use this connector standard. Alongside the main lead, a separate balance connector is fitted for charging routines designed for Li-Ion packs. The rectangular pack shape suits the battery bays commonly used in 1:10 RTR chassis, where a contained format helps with placement and cable management. As an accessory for powered RC vehicles, it serves as the drive pack rather than a transmitter or receiver power source. In use, the pack suits spare-battery rotation for race days, practice laps and general weekend running with 1:10 RTR cars. The included battery pack gives compatible models a ready power source; a suitable charger is required separately.

Chargers & charging cables

Adapter T-Plug to Tamiya female, adapter cable

€5.99

Different connector standards are a familiar part of RC building, and this adapter cable creates a direct link between a T-plug connection and a Tamiya female connector. The short lead combines 2-pin connectors with red and black wires, giving the setup a clear polarity layout for model and charging tasks. In model use, the adapter makes it possible to connect battery packs with a Tamiya connector system to models that use a T-plug actuator connection. The same cable can also be used between a charging lead with T-plug and battery packs with a Tamiya connector. That dual role adds practical value on the bench, especially where existing packs and charging equipment use different connector formats. As an accessory in the models and supplies category, it focuses on compatibility rather than added electronics or conversion modules. The compact format suits hobby spaces where several RC systems are kept ready for maintenance, battery changes or charging preparation. Age marking: 14 Years. Whether used as part of a running setup or as a charging bridge, the cable adds a simple connection path between 2 established plug types.  Warning! Not suitable for children under 14 years.

RC servos

CS-5 Servo 5kg/JR, servo, regular size

€14.99

The CS-5 Servo 5kg/JR brings regular-size servo control to RC model setups with 50 Ncm torque, a 4.8-6 V operating range and a Graupner/JR connector-system. Its compact 38.5 x 19 x 32 mm format and 39 g weight make it a practical choice for installations where the servo has to fit neatly alongside the rest of the radio equipment. The 0.17 sec/60° transit speed gives the output shaft a quick response when steering geometry or throttle linkage needs direct movement. The regular-size format suits many common model layouts, and the connector-system supports integration with electronics built around the Graupner/JR standard. The servo housing includes mounting tabs for fixed installation in the chassis or radio tray, while the splined output shaft accepts servo horns for linkage connection. Age 14 Years is stated for this model component. In use, the CS-5 fits projects where reliable actuation is needed for steering, throttle or other control functions in model builds. It also suits replacement work when an existing setup calls for a regular-size servo with Graupner/JR connection and clearly defined speed, voltage and torque figures.  Warning! Not suitable for children under 14 years.

RC remote controls

FS 3K Reflex Wheel Pro 4 2,4GHz

€45.99

The Carson RA 3Ch Reflex Wheel Pro 4 2.4GHz (500500110) is an ergonomic 3-channel remote control with 2.4 GHz system, nano receiver and instructions. For model building fans, it offers two infinitely variable proportional channels, programmable channel 3, servo reverse, trim and dual rate functions, LED battery indicator, failsafe, ball bearing steering wheel and operating voltage 3.6-4.5 V. Not for children under 14 years.   Warning! Not suitable for children under 14 years.

Light & sound

LED Light Stick Set blue, lighting set, 4.8-6V

Blue accent lighting has long been part of the tuning look in RC scenes, and this LED Light Stick Set blue brings that effect into compact model builds with 2 slim light bars and a ready-wired connection. Designed for 4.8-6 V systems, the set adds a clear blue glow that suits body edges, underbody sections or interior areas where visible light changes the whole presence of a model. Each light stick uses a narrow strip format that fits into tight installation points, while the red and black leads and the 2-pin connector give the wiring a direct, workshop-style layout. The illuminated bars show multiple surface LEDs arranged in a row, creating an even line of light rather than a single point source. That makes the set useful for custom car shells, drift bodies, on-road racers or other hobby projects where lighting is part of the finished look. The 2-piece format also supports symmetrical placement across left and right sides. In use, the blue glow can frame wheel arches, highlight side sills or add depth to cabin and chassis areas during evening runs or shelf display. For model builders aged 14 years and up, the set offers a focused way to add electronics-based styling detail without changing the core character of the build.  Warning! Not suitable for children under 14 years.

Light & sound

LED Street Light Unit, light set, for 1:10 models

€27.99

The 1:10 LED Street Light Unit brings realistic vehicle lighting functions to compatible scale models with a compact controller, multiple LED outputs and a wiring layout made for RC installation. Front lights, rear lights, brake lights, reverse lights and left-right turn signals can be simulated through dedicated 3 mm and 5 mm LEDs, giving the model a more lifelike look when steering and throttle inputs change. The unit operates on 4-6 V DC and draws a maximum of 210 mA, which keeps the electrical requirements clearly defined for matching electronics. FUTABA plug system compatibility for TAMIYA models supports straightforward integration into suitable setups. The connection layout links the module with receiver, servo and ESC, so the lighting reacts through the vehicle's control system rather than acting as a simple constant-on lamp set. Demo mode starts when the transmitter is switched off, allowing the installed lighting functions to be checked directly on the bench. With dimensions of 42 x 32 x 13 mm and a weight of 44 g, the controller suits scale builds where installation space matters. Age 14 Years. This light unit fits hobby projects that aim for more detailed road-car presentation, whether the focus is a fresh body shell build, an electronics upgrade or a more convincing parked display between driving sessions.

Li-ion batteries

Nano City Replacement Battery, Li-Ion battery

€6.99

Compact RC models rely on a battery that matches both their format and their connector, and this Nano City replacement battery is built exactly for that role. The 3.7 V Li-Ion cell with 500 mAh capacity and 1.9 Wh provides a dedicated power source for selected Carson vehicles, with a JST plug and attached lead for the specified connection type. It is supplied as 1 replacement battery and is intended for compatible models named in the data: 500907681 1:50 Nano City Fire Truck 2.4GHz, 500907682 1:50 Nano City Crane Truck 2.4GHz, 500907683 1:50 Nano City Garbage Truck 2.4GHz, 500907684 1:50 Nano City Tipper Truck 2.4GHz, 500404317 1:32 VW Beetle Rally 2.4GHz RTR white, 500404318 1:32 Volkswagen Beetle 2.4GHz RTR red, and 500404312 1:64 Flixbus 2.4GHz 100% RTR. The Li-Ion format suits repeated charging cycles, making it a practical spare or replacement for regular use. The label states a maximum charging current of 500 mA. As a replacement part, this battery fits especially well in setups where the original power unit needs to be exchanged after frequent driving sessions or kept ready as a charged spare between runs. Age marking: 8 years.

RC receivers and accessories

Receiver Reflex Stick Pro LCD, RC receiver

€54.99

The Receiver Reflex Stick Pro LCD is a compact 2.4 GHz replacement receiver for the Reflex Stick Multi Pro LCD RC system, built to restore full radio control in compatible model setups. With 14 channels in one unit, it provides broad connection capacity for steering, throttle and additional switched or proportional functions in more complex vehicle or model configurations. Its 35 x 26 x 14 mm format helps the receiver fit into installations where electronics space is limited, while the 4.8 to 6 V input range matches common RC system voltages. The housing shown with channel ports from CH1 to CH14, a bind area, an F/S set function and LED status indication points to clear handling during setup and system pairing. As a replacement component, it is intended for the Carson Reflex Stick Multi Pro LCD system rather than as a universal receiver claim across unrelated transmitters. In practical use, this receiver suits hobby workbench repairs, electronics replacement in an existing model, or the restoration of a compatible RC setup after a receiver swap. The 14-channel layout leaves room for models that go beyond basic steering and drive functions and need extra control paths for added onboard features.

RC receivers and accessories

Receiver Reflex Wheel Start, RC receiver, 2.4 GHz

€19.99

The Receiver Reflex Wheel Start 2.4 GHz is a dedicated replacement receiver for the Carson Reflex Wheel Start RC system, bringing the radio link back into service with a compact 35 x 30 x 13 mm format and 3-channel control. Its 2.4 GHz transmission setup and slim antenna wire suit model installations where electronics need to sit cleanly inside a tight chassis layout. The receiver is designed for the matching Reflex Wheel Start system and works as the central connection point for steering, throttle and an additional channel. An input voltage range of 4.8-11 V supports integration into common RC vehicle electronics, while the exposed connector bank keeps servo and control leads clearly arranged during installation. The housing also carries an LED indicator area and a switch point for setup functions on the unit itself. This is an electronic accessory for model use rather than a toy, with the technical focus placed on dependable signal handling inside the vehicle. In the workshop, it serves as the right spare part when an existing Reflex Wheel Start setup needs a fresh receiver. Once installed in a compatible RC model, the compact body and straightforward channel layout help keep the onboard electronics organised for regular driving sessions and maintenance work.

NiMH batteries

6V/1800mAh RX-Battery Hump BEC, battery pack

€13.99

This 6 V NiMH RX-Battery Hump BEC is built for model electronics that need a compact rechargeable power source with a defined receiver-battery format. The 1800 mAh capacity gives the pack a solid energy reserve for compatible RC installations, while the hump-pack shape helps it fit layouts where a flat pack would take up too much room. The BEC connector system is intended mainly for use as a receiver battery, so the pack suits setups that call for a dedicated onboard power supply rather than a general loose cell arrangement. Nickel-metal hydride chemistry makes it a rechargeable option for repeated workshop, pit and running use, and the stated maximum charging current of 1.8 A sets a clear charging parameter for matching equipment. Beyond receiver duty, the compact pack can also serve as an additional battery for many other model building applications when a small 6 V source is required. On the bench, in an RC vehicle or in a custom model installation, the pack adds a straightforward way to supply compatible electronics with rechargeable 6 V power. Age marking: 14 years+

NiMH batteries

7.2V 1800mAh NiMH Race Battery TAM, battery

€18.99

Built for hobby-grade RC use, the 7.2 V 1800 mAh NiMH Race Battery TAM delivers rechargeable power in a compact racing pack format for compatible vehicles and other model building applications. The nickel-metal hydride cell chemistry gives this pack a clear role in electric setups that need a ready-to-run power source with a stated maximum charging current of 1.8 A. Its Tamiya connector system provides the matching plug format for compatible chassis and vehicle layouts, while the pack design suits common RC installations where a wired battery connection is required. Beyond RC cars, the stated use for other model building applications opens the door to further electric hobby setups that run on the same voltage and connector standard. The battery is rechargeable rather than disposable, making it a practical workshop component for repeated driving and testing sessions. Age marking: 14 Years. On the bench, the pack fits naturally into the routine of charging, connecting and heading out for a run with a compatible electric model. In active RC use, the combination of 7.2 V output, 1800 mAh capacity and high-current discharge supports driving sessions that call for dependable power delivery.

LiPo batteries

7.4V 5400mAh LiPo Battery, RC battery, 60C

€54.99

Built for RC car setups that need strong current delivery, this 7.4 V LiPo battery combines a 5400 mAh capacity with a 60C rating in a compact drive pack for compatible model vehicles. The hardcase format shown in the product visuals adds a defined rectangular shape that fits neatly into typical battery trays, while the T-plug connection supports a direct high-current link in matching layouts. With 39.96 Wh marked on the pack, the battery brings a clearly stated energy figure to workshop planning and running preparation. The attached leads include the main power connection and a separate balance connector, giving the pack the connection layout commonly used for charging and cell balancing. The battery is described as suitable for 1:10 and 1:8 brushed and brushless RC cars, which makes it a practical choice for spare-power duties, replacement use, or a second pack for longer track or off-road sessions. The stated maximum charging current is 5.4 A. In the chassis, the pack suits builds where cable routing, tray fit and connector type matter just as much as raw output. On the bench or at the track, it supports compatible RC cars that rely on a 7.4 V drive battery for repeated runs and quick pack changes between sessions.

RC chassis & attachments

Antenna Tube Neon 4Pcs. Model Accessory

€3.29

Antenna Tube Neon 4Pcs. adds a bright finishing detail to RC model setups with 4 coloured antenna tubes designed for visible aerial routing. The set combines blue, green, yellow and black tubes, creating a clear marker above the bodyshell that helps the model remain easy to follow during running sessions. Each tube is shaped as a slim, flexible accessory part for fitting onto a model antenna, with matching black end pieces shown as part of the set. The colour mix supports quick visual differentiation between vehicles on a pit table, club track or storage shelf, while also serving as a straightforward replacement for worn antenna tubing. As a compact model accessory, the set suits routine maintenance, rebuilds and visual updates without changing the core vehicle layout. On home tracks, club circuits or display shelves, the coloured tubes add a sharper visual reference point above the body line. In workshop use, the 4-piece pack keeps spare antenna parts ready for repairs, fresh builds or colour-matched finishing touches across several RC models.

Ball bearings

Ball Bearing Set BT-01/MB-01, model spare part

€19.99

This 18-piece ball bearing set is made for BT-01 and MB-01 models and brings a more precise running surface to the rotating assemblies inside the chassis. Metal bearings support axles and shafts where clean, consistent movement matters, making the set a practical choice for maintenance, repair or tuning work. The assortment shown includes multiple bearing sizes, allowing the set to cover different mounting points rather than a single location. Shielded bearings help keep the running surfaces enclosed, while the ring-shaped and smaller open-centre formats shown in the set extend its use across varied mechanical positions. In RC model drivetrains, bearings are used where wheels, gears or transmission parts rotate under load, so replacing worn bushings or tired bearings can restore smoother mechanical action. The dedicated BT-01 and MB-01 fit keeps the selection focused on compatible chassis instead of a generic mixed hardware pack. On the workbench, the set supports routine servicing before the next run as well as targeted replacement during a rebuild. It also suits enthusiasts refining a fresh chassis setup, where low-friction rotating points contribute to cleaner rolling and drivetrain response.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Battery Box, RC accessory, receiver battery mount

€3.79

Glow-engine RC cars often rely on a separate receiver power supply, and this Battery box is made for exactly that task. As a receiver battery mount with attached connection cable, it creates a direct link between the battery compartment and the onboard electronics in compatible RC setups. The housing shown in the product data is built for 2 cylindrical AA cells and uses internal spring contacts at each end of the compartment. Molded + and - markings inside the tray guide battery orientation, while the red and black leads run out to a compact 2-pin connector for straightforward integration into the vehicle's receiver power circuit. That makes this accessory useful both as a replacement part for an existing model and as a practical spare kept in the workshop for maintenance or rebuilds. Batteries are not included. In use, the battery box fits the kind of setup where a glow-engine model separates receiver power from the engine system, helping keep the radio functions supplied during running sessions. It also works well as a service part when worn battery holders, tired contacts or damaged leads need to be swapped out in a compatible RC car.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Charging Cable Reflex Wheel/Stick II/Pro

€9.29

This charging cable links compatible Carson Reflex transmitters to the matching charging connection with a simple adapter layout. One end uses a DC barrel plug, while the other end carries 2 banana plugs with red and black sleeves, creating a clearly assigned polarity setup for workshop charging routines and RC equipment storage. The cable is specified for Reflex Wheel X, Reflex Wheel Pro, Reflex Wheel Pro II, Reflex Wheel Pro III, Reflex Stick II and Reflex Stick Multi Pro. That model-specific fit makes it a practical replacement lead when an original cable is missing, and a useful spare for keeping radio equipment ready between driving sessions. The molded strain relief at the barrel connector supports the transition from plug to wire, while the short cable format stays easy to pack in a field box, tool case or charging area without adding bulky hardware. On the workbench, in the pit area or alongside stored transmitter gear, this lead adds the exact connection needed for the listed Reflex series. Age marking: 14 Years.  Warning! Not suitable for children under 14 years.

RC servos

CS-6 Servo, RC servo, 6 kg metal gear

€18.99

The CS-6 Servo brings controlled movement to RC steering and throttle functions with a regular-size format, 6 kg force and a 0.2-second response. Its blue and black housing, top output spline and JR plug layout make it a focused choice for model sport builds that need a compact actuator with clear, direct linkage control. Inside the housing, metal gears transfer the servo movement to the output shaft, supporting precise actuation where repeated steering corrections or throttle inputs matter. The 3-wire connector lead links the unit to compatible receiver systems, while the side mounting tabs with screw holes allow fixed installation in a chassis or frame. The supplied horn set includes a single-arm horn and a 4-arm cross horn, each with multiple mounting holes for different linkage positions and throw adjustment. Rubber grommets and the mounting screw complete the core fitting hardware shown for installation. In an RC car, boat or other model using linkage-driven motion, the CS-6 can be assigned to steering, throttle or another control task that needs measured rotational travel. Age marking: 14 Years.

Li-ion batteries

Deutz Tractor Li-ion Battery Pack, RC accessory

€12.50

This 7.4 V Li-ion battery pack adds a compact power source for compatible RC applications and carries a 500 mAh capacity in a small-format pack with attached lead and plug. The JST-4 connection gives the pack a defined interface for matching electronics, making it suitable as a replacement battery or as an extra pack for longer workshop and driving rotation. The label states fast-charging capability with a maximum charging current of 1C, equal to 500 mA, so charger choice can be matched to the pack's specified limit. Product data marks the battery as a rechargeable accessory rather than a complete vehicle set, which makes the format and connector type the key buying details. The visible cable layout with red, blue and black wires leads into a black plug connector, and the pack is identified as a High Performance Li-ion Battery Pack on the label. Batteries are not included with the wider set context in the data, so this rechargeable unit serves as the battery itself. In practical RC use, a spare pack like this helps keep a compatible Deutz tractor setup ready for the next run while another pack is off the model. It also suits bench testing, maintenance sessions or replacing an older battery when the required specification is 7.4 V, 500 mAh and JST-4 connection.

RC electric motors & controllers

ESC tio Marine 30, brushed marine speed controller

€51.99

Built for RC boat use, the tio Marine 30 is a brushed marine speed controller that combines 6 to 12 V operation with a 30 A motor limit for DC brushed motors. Its fully waterproof design suits running conditions where spray, splashes and wet decks are part of the setup, while the compact controller body connects battery and motor through clearly marked positive and negative leads. The control system uses 4 quadrant operation, so the motor stops completely before changing into the opposite direction. That sequence creates balanced response around the neutral position and supports precise manoeuvring at low speed. Reverse can also be switched on or off, allowing either forward and reverse running or a forward-only mode with brake function. Programming and calibration are handled through the set button and LED signals, with separate indications for neutral, forward, reverse, battery selection and failsafe mode. The controller is compatible with LiPo as well as NiCAD, NiMH and lead acid battery packs. In a model boat, that mix of directional control and battery flexibility suits everything from careful harbour-style manoeuvres to steady throttle changes on open water. When signal loss occurs, the built-in failsafe returns the controller to neutral, and the added protection functions help manage motor stall, short circuit and overheating during demanding sessions.

RC electric motors & controllers

ESC Viper Sub 10, speed controller, 6-12V

€49.99

Built for RC submarine setups, the Viper Sub 10 is a brushed speed controller that combines 6-12V operation with a 40A motor limit for DC brushed motors under load. The fully waterproof design suits running conditions where electronics work below the surface and around constant spray, wiring and propulsion demands. A one-touch setup routine calibrates the controller to the radio system through the onboard button and LED sequence, setting neutral, full forward and full reverse positions. The unit also adds programmable reverse functions for more precise control of manoeuvres in confined water spaces. A high-power 3A BEC provides regulated 5.0V output for additional onboard functions that need a stable supply, going beyond the standard Viper Marine specification mentioned in the data. Built-in failsafe, motor short circuit protection and thermal overload protection add concrete electronic safeguards during operation. In a scale submarine build, these features support steady throttle control during launch, submerged cruising and low-speed direction changes near obstacles or weed. The compact controller format with clearly marked battery and motor connections also fits the technical character of dedicated RC boat and submarine installations.

RC combustion engine models

Fuel Bottle 500 ml, filler bottle, measuring scale

€6.99

The Fuel Bottle 500 ml brings a straightforward workshop tool to nitro gasoline RC preparation, combining a 500 ml capacity with a narrow dispensing setup for controlled tank filling. Its translucent bottle body, black screw cap and long blue nozzle create a clear, functional layout that suits bench work before a driving session. Volume markings from 100 to 500 ml are embossed along the side, so the current fill level stays visible while handling fuel. The curved nozzle is shaped for access to tighter tank openings, and the small black angled tip helps place the flow more precisely at the inlet. Hand pressure on the squeeze bottle controls the output directly, which supports measured transfer instead of a broad pour. The cap closes the nozzle when the bottle is not in use, keeping the setup ready between workshop tasks. 1 x tank filler bottle is included. On the workbench, the bottle fits routine filling, topping up and checking quantities before a run. At the track, the marked body and directed nozzle support quick pit preparation when nitro RC models need a clean refill between driving sessions.  Warning! Not suitable for children under 14 years.

RC remote controls

RC-Reflex Pro 3, electric set, 2.4 GHz RC

€124.99

The RC-Reflex Pro 3 Electric Set brings together the core electronics needed to equip ARR and assembly kit models for the track or the water. Built around a 2.4 GHz radio system, the set suits RC cars and boats and combines control hardware, charging equipment and NiMH power components in one coordinated package. The transmitter works with an operating voltage of 4.8 to 6 V and pairs with a 4-channel receiver. Two continuously controllable fully proportional channels handle steering and throttle inputs with direct response. Servo reverse is available on both channels, while trimming functions for accelerator and steering help align the model accurately. Dual rate on both channels limits servo travel when a calmer steering setup is needed. The integrated fail-safe adds a concrete control function for signal loss situations, and the plug system supports Futaba and Graupner-J/R connections. A charging socket with plus terminal inside is built into the system. Power supply is covered by a 7.2 V 3000 mAh NiMH driving battery with TAMIYA plug and 4 NiMH Mignon 1.2 V 2100 mAh transmitter batteries. The included 2-in-1 charger works from 100-240 V, 50-60 Hz AC and provides max. 2 A at 9 V on output 1 and max. 0.5 A at 6 V on output 2. With the CS-6 steering servo, receiver, charger and battery set included, this electric package fits hobby setups that need a complete radio and power foundation for Tamiya-compatible models. Age 14 Years  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex 6/14Ch Switch 4, switch module, 4-channel

€44.99

The Reflex 6/14Ch Switch 4 adds 4 extra switching functions to an RC setup through one receiver channel, turning button, switch or joystick inputs into separate output commands. Its compact 16 x 14 x 4 mm housing and approx. 10 g weight suit installations where space is limited and clean wiring matters. The module connects directly to the RC receiver and evaluates both control position and input duration, so short and long movements in the up and down directions can trigger different outputs. That switching logic gives access to 4 separate NPN outputs, each rated for up to 2.5 A and a maximum switching voltage of 16 V/DC. Every output uses a 200 mm blue silicone cable with 0.25 mm² cross-section and is connected to the negative pole of the load. The black negative cable also measures 200 mm, uses 0.5 mm² cable cross-section, and can be connected directly to the battery or a distribution terminal. Input voltage is 4 to 8 V/DC, with 5.0 to 5.5 V/DC supplied from the receiver, and input current is approx. 18 mA at 5.0 V/DC. A 300 mm servo connection with UNI system supplies the module itself from the receiver, keeping the layout straightforward in model cars, trucks or other RC builds with added electrical functions. For high loads, the black cable is connected to the distribution terminal or drive battery to prevent damage to the receiver. Age marking: 14+  Warning! Not suitable for children under 14 years.

Remote-controlled systems

Reflex Wheel Pro 4 Gyro Receiver, 4-channel

€32.99

The Reflex Wheel Pro 4 Gyro receiver brings 4-channel radio control and integrated gyro support together in one compact module for RC model setups. Its black housing carries clearly printed CH1, CH2, CH3 and CH4 markings, making the connection layout easy to read during installation and helping keep each assigned function in order inside the vehicle. The unit is part of the Reflex Series Pro 4 range and includes dedicated Pair and FS markings directly above the connector area. That layout keeps binding and failsafe functions tied closely to the receiver body instead of leaving key setup steps to guesswork. Built-in DEC and INC controls add direct access to adjustment changes on the module itself, which is useful when fine-tuning the gyro response in a workshop setting. The compact rectangular form also suits tighter chassis layouts where electronics need to sit neatly alongside steering and drive components. In practical use, this receiver fits hobby builds that need organised channel assignment and onboard adjustment access in one place. The 14 Years marking identifies the recommended age, while the receiver format suits model-building enthusiasts working on compatible RC vehicles and electronics installations.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€134.99

The Reflex Wheel Pro 4 set brings core RC electronics together in one 2.4 GHz package built around a 4-channel pistol-grip transmitter, matching mini receiver, 6 kg metal-gear servo and brushless set. The transmitter uses 2 infinitely variable fully proportional channels and 2 additional switchable channels, opening the door to steering, throttle and extra vehicle functions from a single handset. Its LCD interface supports direct setup work for hobby-grade driving, with servo reverse on channels 1 and 2, trim for throttle and steering, dual rate adjustment, Expo and ABS functions, and 15-model memory for running more than one vehicle without rebuilding settings each time. Channel 3 can be programmed as a switch or button function, while channel 4 uses a 3-level switch. An LED battery status display keeps the transmitter power level visible during use. The transmitter operates at 3.6-4.5 V, and the receiver power supply is rated at 3.5-10 V without a BEC. On the vehicle side, the waterproof nano receiver and compact electronics suit tight chassis layouts, while the brushless set adds the drive hardware needed for responsive running. The included instructions complete the set. With 14 Years as the stated age marking, this package fits hobby sessions focused on tuning steering feel, throttle response and auxiliary functions for track, touring or general RC driving.  Warning! Not suitable for children under 14 years.

NiMH batteries

RX Battery Hump BEC, receiver battery pack, 6V

€18.49

A dedicated receiver battery can make all the difference in an RC setup, and this RX Battery Hump BEC brings that role into a compact 6V format with 1600mAh NiMH capacity. The hump configuration suits installations that need a stepped pack shape, while the BEC plug provides the connection for compatible receiver systems in model sport applications. The NiMH cell chemistry makes this pack a rechargeable power source for repeated use, and the 6V rating matches the clear electrical specification given for receiver supply. Red and black leads run from the shrink-wrapped pack to the connector, creating a straightforward layout for integration into suitable RC vehicles and related hobby builds. As a separate battery pack rather than a complete driving set, it is aimed at installations where the receiver power source is chosen as an individual component within the electronics setup. In workshop preparation, race-day spares storage or routine maintenance between runs, the compact pack format fits naturally into the rhythm of RC model use. Minimum age 14 years is stated for this battery pack.  Warning! Not suitable for children under 14 years.

RC servos

Servo CS-6, RC servo, low profile waterproof

€26.99

The Servo CS-6 brings compact low-profile dimensions, waterproof construction and 6 kg control force into one RC servo for space-conscious model layouts. Its metal gear transmission and JR connector suit steering and linkage duties where a clean fit and dependable response matter across changing track conditions. The low-profile housing helps when radio trays, chassis decks or body clearances leave little vertical room, while the stated 4.8-6 Volt operating range supports use across common RC electrical setups. A speed figure of 0.16 adds a concrete reference for the servo's response in steering or control applications. Included components cover the servo itself, a JR connector and a servo horn set, so the mounting and linkage side starts with the core parts already in hand. The horn set adds different connection points for setting linkage position and travel, and the metal output train keeps the transfer from servo shaft to steering system mechanically focused. In touring cars, drift builds, boats or other compact RC models, the CS-6 fits where standard-height servos can become awkward to place. Wet grass, puddles, damp pit areas or splash-prone running sessions make practical use of the waterproof design, while the 14 years marking places it within the hobby-focused end of the range.  Warning! Not suitable for children under 14 years.

LiPo batteries

Single Blade 320 battery, RC accessory, 3.7V

€16.99

The Single Blade 320 uses a compact 3.7 V LiPo battery pack with 300 mAh capacity and 1.11 Wh energy, giving this RC accessory a clearly defined power format for the matching model. Its black housing combines a slim rectangular shape with a vented upper shell and a metallic end cap, creating a neat module that fits the technical look of small-scale RC equipment. Visible contact pins at one end show the docking-style connection concept directly, so the battery is built for straightforward insertion into the compatible device rather than loose wire handling. The lithium polymer cell format keeps the pack compact, which suits applications where space inside the model is limited. As a separate battery unit, it works well as a replacement for a worn pack or as an additional charged module kept ready for the next run. The casing also carries the printed electrical data on the pack itself, so voltage, capacity and energy rating remain easy to identify during workshop prep. On the bench, this battery suits the routine of charging, swapping and returning a model to action with minimal interruption. In regular RC use, a second matched pack can help keep sessions moving while one battery charges and the other is in service.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Speed Controller Dragster Brushed 70A, ESC

€32.99

The Speed Controller Dragster Brushed 70A brings precise throttle control to brushed RC setups in a compact 34.5 x 30.2 x 18.7 mm format with a weight of 39 g. Its splash-proof design and dust-proof housing broaden installation options beyond land vehicles, including boat applications where moisture resistance matters. This electronic speed controller is built for brushed 540 and 550 motors at 18T or below 30000 rpm at 7.2V, giving model builders a clear technical match for common 1:10 platforms. Forward current is rated at 70A continuous and 360A peak, while reverse reaches 40A continuous and 180A peak. Automatic throttle calibration simplifies setup, and the integrated capacitor supports stable operation. Battery type and drive mode are selected by jumper pin, with settings for LiPo or NiMH and operating profiles for Boat, F/B/R and Crawler. An integrated on/off switch and receiver lead complete the wiring layout between battery, motor and receiver. Included are the Dragster Brushed 70A speed controller and a Tamiya/T-plug adapter. For installation and operation, radio gear, a battery pack and a charger are required separately. In a buggy, crawler or boat, the controller gives brushed power systems a defined, configurable control centre for varied terrain and driving styles.

RC tuning parts

TT-01 / TT-01E Tuning Set, RC chassis upgrade

€56.99

The TT-01 and TT-01 Type E remain popular touring car platforms, and this tuning set focuses on the parts that most directly change how the chassis drives. Built for both TAMIYA variants, it combines drivetrain and suspension upgrades in one coordinated package for a more responsive on-road setup. The set contains a 16-piece ball bearing set, 4 C.V.A. oil dampers, a spur gear set with 58T and 55T gears in module 0.6, and a 28T steel pinion gear in module 0.6. The bearing conversion replaces higher-friction running points with rolling elements that help the drivetrain turn more smoothly under power. The oil dampers manage chassis movement more precisely than a basic friction-based setup, which helps the car stay composed through braking zones, lane changes and long bends. The two spur gear options allow gearing changes within the TT-01 system, while the 28T steel pinion completes the speed-oriented transmission setup. On a clean tarmac layout or a home track with repeated corner sequences, the combination shows its value through steadier handling and a freer-running drivetrain. For hobbyists refining a TT-01 build, this set brings together the key upgrade parts needed to tune steering response, traction and final speed without piecing the setup together part by part.  Warning! Not suitable for children under 14 years.

RC tuning parts

Tuning Set MB-01/BT-01, chassis upgrade set

€49.99

The MB-01 and BT-01 platforms are popular bases for compact RC builds, and this tuning set is aimed squarely at extracting more from those chassis layouts. Developed for TAMIYA MB-01 and BT-01 chassis, it focuses on the areas that shape how a model reacts on the road: steering behaviour, traction, efficiency and overall running balance. Rather than changing the character of the chassis at random, the set is intended to refine key driving traits on compatible builds. More controlled manoeuvrability supports cleaner steering inputs, while improved road holding and traction help the chassis stay composed through corners and direction changes. The upgrade concept also targets lower power consumption, which can support longer running time from the same setup. Reduced tyre abrasion adds another practical benefit for regular use on paved surfaces, and the performance brief also includes higher speed on suitable builds. This makes the set a strong match for hobbyists who enjoy tuning a chassis around measurable driving behaviour instead of cosmetic changes alone. MB-01 and BT-01 chassis are not included, so the set is intended as an add-on for existing compatible models and workshop-based upgrade sessions.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 All Terrain Wheel-Set, model wheels

€26.99

A 1:10 wheel set can change both the stance and the running character of a model, and this all terrain 2WD set brings that effect through 4 matching wheels with deep off-road tread and black rims. The combination suits replacement work on used running gear as well as fresh builds that need a complete rolling set in one pack. The tyres show a directional zigzag pattern with a wide profile that gives the contact surface a defined shape on mixed ground. The black rims use a multi-spoke layout with narrow rectangular openings around the outer ring, adding a technical look that fits many RC vehicle styles. A large centre hub opening is built into each wheel for mounting on compatible 2WD models. The set is supplied as 4 coordinated wheel units, which keeps tread pattern and rim style aligned across the chassis instead of mixing different wheel types. On a workshop bench, the set suits routine replacement after heavy running sessions or a visual update during a rebuild. Once mounted, the all terrain layout supports RC driving on loose and uneven surfaces where a more pronounced tread pattern is part of the setup. Age 14+

RC tires & rims

1:10 Design 10 wheel set, model wheels, red

€22.99

A 1:10 wheel set can change the whole stance of a model car, and this Design 10 version does it with 4 matching wheels in metallic red. The multi-spoke layout and black tyres create a clear motorsport look that suits track-focused builds, replacement work and visual tuning projects. The set is specified at 26 mm width, giving a concrete reference for model builders matching wheels to an existing chassis or bodyshell. Each wheel follows the same Design 10 spoke pattern, so the finished car keeps a uniform appearance from front axle to rear axle. The red finish adds contrast on darker paint schemes, while the mounted black tyres make the set useful for direct wheel changes instead of sourcing rims and tyres separately. As an accessory in the Models Supplies range, this wheel set fits naturally into workshop stock for rebuilds, refreshes and style updates on 1:10 RC car projects. On a touring car, drift build or display-focused shelf model, the red rims shift the visual balance immediately and give the chassis a sharper custom look. Age 14 Years is stated in the product data, placing this accessory in the hobby segment rather than as a general toy part.

RC brushless motors

1:10 Dragster Turbo 4370KV, brushless set

€69.99

The 1:10 Dragster Turbo 4370KV brushless set brings a matched sensorless drive package to RC car builds that call for sharp acceleration and high top-end speed. The combination of an 8T brushless motor and a waterproof electronic speed controller is designed for 1:10 applications, with the motor rated at 4370KV and up to 488W for fast-revving on-road setups and hard-charging off-road runs on suitable battery combinations. The controller is specified for 60A continuous current and 360A peak current, with 0.0007 Ohm resistance, 2A/5V BEC output, dimensions of 51 x 36 x 36 mm and a weight of 80 g. Programming is possible via Program-Card 500906303. The motor uses a 4-pole layout, supports up to 12V, draws up to 66A with a minimum current of 3.2A, and measures 35.8 x 50 mm at 148 g. A 3.175 mm motor shaft with 15 mm shaft length and 4 mm gold connectors completes the hardware package for clean installation in compatible chassis. For running setups, 2S LiPo and 6-cell NiMH are specified for on-road and off-road use, while 3S LiPo and 9-cell NiMH are specified for on-road use only. Wet and damp conditions such as rain and puddles are supported, but the vehicle and components must not be submerged under water. The set includes the brushless motor, brushless controller and instructions.

RC brushless motors

1:10 Dragster Turbo, brushless set, 3300KV

€69.99

Built for fast 1:10 RC setups, the Dragster Turbo brushless set pairs an 8T sensorless 3300KV motor with a 60A controller for strong launch force, high efficiency and the kind of top-end pace that suits both on-road and off-road driving. The combination is designed for 2S, 3S and NiMH 6 to 9 cell battery formats, opening up different power layouts within one drive package. The controller measures 51 x 36 x 36 mm, weighs 80 g and is specified for 60A continuous current with 360A peak current, a 2A/5V BEC and 0.0007 Ohm resistance. Programming is possible via Program-Card 500906303. The motor measures 35.8 x 50 mm, weighs 148 g and is rated at max. 350W with up to 17V, max. 47A and min. 2.6A. Its 4-pole layout, 4 mm gold connectors, 3.175 mm shaft diameter and 15 mm shaft length give model-building enthusiasts concrete data for matching the set to an existing chassis and drivetrain. Wet and damp running conditions such as rain and puddles are supported, but the vehicle and components must not be submerged under water. The set includes the brushless motor, brushless controller and instructions, making it a focused upgrade choice for hobbyists tuning acceleration, response and speed in electric RC cars.

RC truck accessories

1:14 Low Loader Axle Steered, trailer axle

€104.99

Low loaders with steered axle groups are a familiar sight in heavy-haul transport, where long trailers need controlled wheel movement to stay manageable in tight turns. This 1:14 Low Loader Axle Steered assembly brings that engineering theme into a scale trailer build with a compact mechanical unit focused on the undercarriage. The set centres on a linkage-driven axle layout with metal arms, mounting brackets, threaded ends, fasteners and cross-members arranged to transmit steering movement across the assembly. Product images show a black main bar combined with silver linkage elements, pivot points and adjustable slotted sections that support careful setup during installation. The construction is aimed at model-building enthusiasts who enjoy technical chassis work and visible mechanical function beneath the trailer deck. Instead of decorative bodywork, the focus here is on the geometry of the running gear and the interaction between rods, joints and mounts. In a 1:14 transport scene, the assembly suits low loader projects with a detailed underside, upright loading ramps and multi-axle trailer layouts. Age marking: 14 Years. Batteries are not included.  Warning! Not suitable for children under 14 years.

Electronics

1:14 LR LED Front/Rear Light PCB, model accessory

€27.99

Lighting details can change the whole presence of a scale truck, and this 1:14 LR LED Front/Rear Light PCB set brings that effect into a compact electronics accessory for compatible model builds. The set is designed for 1:14 LR applications and uses LED technology with 2 printed circuit boards to create front or rear lighting points that suit detailed finishing work. The accessory format focuses on the electrical side of model customisation. Prewired LED units are included, so the lamp elements already carry attached leads for integration into the vehicle layout. The stated 7.2 V specification defines the intended operating voltage, and the included resistors form part of the circuit setup for that voltage. This makes the set suitable for hobbyists who want to add functional light elements while keeping the installation based on clearly defined components. The compact lamp housings and separate mounting parts shown for the set support precise placement on the model. On a workshop bench, during a body upgrade, or as part of a scale truck rebuild, the lighting set adds a more technical finish to the vehicle. Age marking: 14 years and over. This accessory suits projects where visible electronics details and model-specific light positions are part of the overall build concept.

Basic accessories

1:14 Pole for Trailer Hitch, spare part

€12.49

This 1:14 pole is made as the matching spare part for trailer hitch 500907182 and adds a precise replacement option for model setups that need the original connection element restored. The dark grey moulded piece has an elongated, slightly tapered form that gives the assembly a defined mechanical profile while keeping the part easy to identify during maintenance. At one end, the pole features a rounded eyelet hole, while the opposite end is formed with a rectangular blunt finish. Two recessed circular holes sit along the upper surface and create clear fastening points for mounting within the corresponding hitch arrangement. These visible structural details support accurate positioning when an existing part is replaced and help keep the matching assembly consistent with its intended layout. In workshop use, the pole suits repair benches, ongoing maintenance tasks and parts stock for 1:14 model vehicles with the compatible trailer hitch system. Age marking: 14+.

Electronics

1:14 SemiTrailer LightUnit 7sect., trailer lights

€72.99

Rear lighting is one of the details that gives a 1:14 truck build its finished road-going character, and the SemiTrailer LightUnit 7sect. brings that look to the back end of a matching semi-trailer. The set is built around a 7-section rear light arrangement with red and white lens areas and an orange indicator LED positioned on the outer side of the lamp cluster. The electrical side is laid out as a dedicated light-kit with a multi-pin plug, a panel-mount socket, a white 6-position connector and 2 compact LED circuit boards. The installation sequence shown in the supplied data places the LED boards into the rear light housings from the back, then connects both plugs to the harness with the correct polarity. Cable routing runs along the underside of the chassis, where the wiring can be guided neatly toward the rear assembly and the driver's cab connection. The bumper carries the mounted rear lights, so the finished setup concentrates the visual effect in the correct trailer position rather than scattering separate lamps across the frame. In a workshop setting, this kind of upgrade suits builders refining a 1:14 truck and trailer combination with more convincing rear-end detail. Age marking: 14 years. This is a hobby accessory for model builds where wiring, mounting and final function testing are part of the installation process.  Warning! Not suitable for children under 14 years.

RC truck accessories

1:14 Servo Mount Set, steering axle spare part

€31.49

In 1:14 scale transport and heavy-haul models, the steering geometry under the trailer is part of what gives the finished build its convincing technical character. This servo mount set for the steering axle adds the dedicated hardware needed to integrate that mechanism with a clean, model-focused layout. The set centres on a black mounting plate with a large rectangular cut-out and four mounting holes, supported by a long threaded rod, 2 rod-end style eyelet fittings, screws, bolts and hex nuts. Together, these parts create the basis for a mechanical linkage between the servo position and the axle steering assembly. The threaded rod allows the linkage length to be set within the installed arrangement, while the eyelet ends provide defined connection points for the moving parts. The hardware layout suits detailed chassis work where the underbody and axle area remain visible as part of the model's overall realism. Used on a steering axle build or repair, the set supports controlled integration of the steering mechanism into the undercarriage. It fits naturally into workshop sessions focused on trailer chassis detail, linkage setup and functional model engineering for 14 Years+ hobby use.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Trailer palette case, trailer accessory

€71.99

Built around the look of a parked box trailer, this 1:14 trailer palette case brings freight-yard character into a model transport scene while adding 6 pallets for loading layouts and depot setups. The white trailer body, black side retention straps, grey latch details and tandem rear wheels create a recognisable logistics silhouette that sits naturally beside matching truck models. The front section stands on lowered landing legs with round footplates, and an underbody storage box adds another familiar trailer detail beneath the side panel. A separate loading area with side walls and a hinged access section creates space for pallet handling, so the accessory does more than fill the background. The 6 pallets can be arranged in the storage bay, placed on the platform or set out around a warehouse scene to build up loading and unloading situations with a clear transport theme. In a depot layout, workshop display or road-haulage diorama, the trailer palette case works as a focal point for freight movement rather than a static backdrop. The 1:14 scale keeps the proportions aligned with matching model truck environments, and the 14 Years age marking is stated in the product data.

Basic accessories

1:14 Trailer Splash Guard, trailer accessory

€31.99

Rear splash guards are a familiar detail on working trailers, and this 1:14 set brings that look to compatible scale builds with a defined add-on for the rear end. Designed for the Carson Fliegl Megarunner 500907235 and the 3-axle stanchion trailer 500907629, the splash guard mounts at the bumper or rear underrun protection and adds a more complete commercial-vehicle finish. The set includes 1 large splash guard and assembly material for the rear installation. On the named trailers, the required boreholes are already present in the rear bumper, which keeps the fitting process aligned with the existing mounting points. The screw-on construction attaches the parts directly to the trailer bumper or rear underrun protection. Beyond the two specified trailer models, the same parts can also be used for self-construction when a custom 1:14 trailer build calls for a rear flap assembly. In a workshop setting, the splash guard suits upgrades, repairs, or detail-focused finishing on a trailer chassis. Mounted behind the rear section, it strengthens the scale appearance of transport scenes, yard layouts, and road-going truck combinations where the back end deserves the same attention as the sides and load area.

Basic accessories

1:14 Trailersuspension-Set, trailer axle kit

€82.99

Built for scale truck and trailer projects, this 1:14 Trailersuspension-Set adds a more technical undercarriage layout with dummy air springs, a lift option and axle movement shaped for model driving. The kit includes 2 suspension versions, so the trailer can be configured in standard height or with a raised +8 mm setup to align with a higher tractor saddle level. The axle assembly measures 78 x 165 x 50 mm and uses a 5 mm wheel axle. New, softer rubber bellows improve bump cushioning at the suspension points, while the geometry delivers 6 mm spring travel in the standard setup and 14 mm in the off-road setup. Twist values of approx. 6 mm in standard form and approx. 10 mm in off-road form add further articulation across uneven sections. The maximum load per axle is approx. 5,000 g. Included: kit and instructions. On a scale road tractor and trailer combination, the raised suspension option helps create a cleaner visual match at the coupling height, while the standard setup suits a lower running stance. During driving, the added axle movement gives the trailer a more convincing response over bumps, ramps and rougher model terrain.

Basic accessories

1:14 Volvo Underr.guard, model accessory

€51.99

Rear underride guards are a defining detail on European trucks, framing the lower rear section with the functional look seen on full-size road vehicles. This 1:14 Volvo underride guard with taillight mount brings that character into a scale build with a metal hardware set shaped for model-truck assembly. The assembly uses mirrored bracket plates, cylindrical rods and small corner brackets to create the structure. Pre-drilled holes in the angled metal plates provide clear mounting points for fastening and alignment, while the rod elements act as connecting spacers within the rear section. The taillight mount is integrated into the layout, so the build does more than add a bar across the back; it creates a dedicated base for rear detailing in keeping with the truck theme. The silver metal finish gives the parts a technical, workshop-style appearance that suits display builds as well as running models. During a new build or a scale upgrade, this accessory helps shape the rear view of a 1:14 Volvo truck with a more complete and model-specific look. Age marking: 14 years and up. The compact hardware format also suits hobby benches where fitting, aligning and refining truck details are part of the appeal.  Warning! Not suitable for children under 14 years.

Li-ion batteries

3.7V Li-Ion Battery RC-Bau, battery, 600 mAh

€14.99

A compact 3.7 V Li-Ion battery pack with 600 mAh capacity brings the specified power supply back to compatible RC construction models. The green shrink-wrapped pack, attached red and black leads, and JST connector create a straightforward replacement format for hobby users working with matching Carson vehicles. This rechargeable battery is listed for the Carson Tractor with front loader and the Carson Bulldozer, where it serves as the stated replacement power unit rather than a general-purpose pack. Li-Ion technology combines the 3.7 V rating and 600 mAh capacity in a small format that suits model applications with limited installation space. The JST connector defines the connection standard, so the pack is intended for models that use this exact plug type. Included: lithium-ion battery. 14 Years marks the recommended age. In the workshop, the pack fits naturally into the regular routine of charging, swapping and returning a compatible model to operation. For RC enthusiasts maintaining construction vehicles, it adds a clearly specified spare or replacement battery option built around 3.7 V output, 600 mAh capacity and a JST connection.

RC brushed motors

540 80T-CB Truck Machine, electric motor

€13.49

Built for RC truck applications, the 540 80T-CB Truck Machine combines a brushed motor layout with 6500 rpm and 165 Nmm output for a drive character that favours controlled torque delivery over aggressive top-end running. The 4.8 to 8.4 V operating range gives the motor a clear place in many hobby-grade vehicle setups. Inside the can, the 80T configuration shapes the motor for measured response in pulling and load-focused use. Sintered self-lubricating bearings support the shaft and reduce service effort, which matters when a drivetrain sees repeated running sessions and regular workshop attention. The motor is also equipped as standard with a motor cable and anti-interference circuitry, so the electrical side is already prepared for integration into a compatible RC chassis. As a single electric motor component, it suits replacements, upgrades, or fresh builds where the drive system needs a defined brushed setup. In a scale truck project, this motor fits the kind of running that calls for steady launch behaviour, controlled throttle pickup, and dependable power transfer through the drivetrain. It also works well in bench-planned hobby builds where voltage range, winding type, and output figures are chosen with the rest of the transmission in mind.  Warning! Not suitable for children under 14 years.

LiPo batteries

7.4V 3600mAh 60C LiPo Battery, RC battery

€34.99

This 7.4 V LiPo battery pack brings 3600 mAh capacity and a 60C discharge rate into RC driving setups that need compact dimensions with strong current delivery. Built as a hardcase pack with a T-plug socket on the main lead, it suits many 1:10 and 1:8 brushed and brushless RC car applications where a clean fit in the battery tray matters as much as output on the track. The lithium polymer cell format is designed for hobby use where quick throttle inputs and sustained load both matter. The label states 26.64 Wh, adding another concrete reference point for the pack's stored energy. Alongside the main power connector, the pack carries a separate balance lead for charging equipment that supports LiPo balancing. The hardcase construction gives the battery a defined rectangular shape that works well with strap-secured chassis layouts commonly used in RC cars. A maximum charging current of 3.6 A sets a clear limit for charger setup and routine workshop use. In practice, this battery fits driving sessions that call for a compact 2-cell power source in off-road and on-road RC cars. It also suits hobby benches where a spare rechargeable pack keeps one chassis ready while another battery is on charge. 14 years is the stated age marking for this RC accessory.  Warning! Not suitable for children under 14 years.

Li-ion batteries

7.4V 500mAh Li-Ion Battery, RC battery pack

€11.49

This 7.4V Li-Ion battery pack brings a compact energy source to compatible RC and electronic setups, with 500mAh capacity and 3.7Wh printed on the pack itself. The wrapped pack format, cable lead and JST connector create a tidy layout that suits installations where space and clear connections matter. The specification on the battery gives hobby users concrete charging guidance: fast-charging capability is stated, with a maximum charging current of 1C 500mA. The pack is supplied as a rechargeable accessory rather than a complete vehicle set, making it a practical match for powered models that call for this voltage and connector format. The visible label also states that the battery should be charged before use and that correct polarity must be observed during connection. These details help place the pack correctly within an RC setup and support informed charger selection. In use, the 7.4V output suits compact powered applications where a defined rechargeable supply is needed. After a driving session or bench use, the plug should be disconnected for storage, matching the handling note printed on the battery pack.  Warning! Not suitable for children under 14 years.

Batteries

9V Block Alkaline Battery for RC Accessories

€3.49

A 9V block alkaline battery is a straightforward power source for compatible RC accessories and other electronics that use the familiar 6LR61 format. The compact rectangular housing and top snap connectors make handling simple during battery changes, while the alkaline chemistry is ready for use as supplied. This battery is listed as a 9V block alkaline type and corresponds to the common E-block format used across many small electronic applications. The product data also references the 6LR61 designation, a widely recognised size standard when a device calls for a 9V battery. Because this is a primary alkaline battery, it is intended for direct installation in suitable equipment rather than recharging. That makes it a useful spare for hobby storage, maintenance kits and regular replacement cycles where a compatible device needs a fresh power source on hand. In practice, the battery fits naturally into the routine around RC equipment, workshop accessories or portable electronics that rely on a 9V supply. Kept in a field box, tool drawer or parts shelf, it covers those moments when a compatible controller accessory, tester or small device needs a quick battery change to get back into use.

Batteries

AA Alkaline Batteries, 20-Pack Power Cells

€9.99

AA batteries remain one of the most common power formats in RC equipment, and this box brings that standard into a straightforward 20-cell supply. Each battery is specified at 1.5 V and uses the AA size, also identified in the data as Mignon and LR6, so the pack suits devices that label the same format in different ways. The alkaline cell type is supplied ready for immediate use rather than as a rechargeable system, which makes the pack a practical match for equipment that needs fresh replacement batteries on hand. With 20 identical cells in one box, it is easier to keep matching power sources available for transmitters, compact electronic accessories and other battery-operated workshop or household devices. The consistent format also helps when several devices in the same setup draw on the same AA standard. The 14 Years age marking is stated in the product data. In day-to-day use, a 20-pack like this fits well into hobby storage, pit boxes or home drawers where spare LR6 batteries are kept ready for the next battery change. When a controller, accessory or small electronic device calls for 1.5 V AA cells, this multipack provides the required format in a single purchase.

Batteries

AA Alkaline Battery Set, 4-pack cells 1.5V

€2.49

AA batteries remain one of the most widely used power formats in RC equipment, and this set provides 4 alkaline cells in the standard LR6 size with 1.5V output per cell. The familiar AA format suits devices designed for this common battery type and keeps replacement straightforward when matching the specification in the equipment. The designation also appears as MN1500, giving another recognised reference for the same cell category. As alkaline batteries, these cells are intended for direct use rather than recharging, which makes them a practical choice wherever a compatible device calls for non-rechargeable 1.5V AA power. The 4-pack format fits typical battery changes for handheld accessories and other battery-powered equipment. In RC use, that can mean keeping suitable cells ready for transmitters or related accessories that depend on the AA standard. The cylindrical cell shape follows the established format used across a broad range of compatible electronics. This set works well as a straightforward stock of replacement cells for hobby gear, workshop drawers or general battery needs around battery-powered equipment. Where a device specifies AA, LR6 or MN1500 cells with 1.5V output, this pack provides the matching format in a compact 4-cell quantity.

Chargers & charging cables

Adapter Cable Mini Tamiya to Tamiya Charger

€3.99

Mini Tamiya battery packs remain common across RC and model setups, and this adapter cable connects them to chargers with a standard Tamiya plug. The short 2-wire lead combines one Mini Tamiya connector and one Tamiya connector, creating a direct link for charging without changing the existing battery pack connection. The cable is designed for batteries with Mini Tamiya plugs and for use with a standard plug charger or a charging device with Tamiya plug. Its compact format keeps the connection path simple, while the red and black wires provide an easy visual reference across the 2-pin layout. In model workshops, pit boxes and home charging stations, that clear connector-to-connector format helps keep charging equipment organised around established Tamiya plug standards. The small looped lead also takes up little space alongside battery packs, chargers and other RC accessories. With an age marking of 14 years, the adapter fits hobby-focused RC and model environments where battery and charger compatibility matters. It serves as a practical link between existing power components for routine charging before track, trail or bench sessions.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

Akuma Receiver 2.4GHz, RC receiver, 3-channel

€23.49

This 2.4 GHz receiver module is built as a replacement part for compatible Akuma, Bokusa and Drakuro RC models, bringing the radio system back into the electronics layout with a compact housing, a long antenna wire and a 3-channel connection format. The marked ports for BAT, CH1, CH2 and CH3 give the installation a clear structure when the module is fitted into the chassis. As a dedicated receiver, this component is made for hobby-grade radio control setups where the signal path between transmitter and onboard electronics needs the correct matching part. The rectangular case keeps the unit easy to position among the existing electronics, while the plug-in connector block supports direct connection of the relevant control functions. The 2.4 GHz specification suits modern RC operation, and the 3-channel design leaves room for steering, throttle and one additional switched or controlled function, depending on the compatible model's layout. In workshop use, this receiver fits naturally into repair, maintenance or parts replacement when an existing model needs the correct control module again. It also suits enthusiasts keeping compatible Carson platforms running with the intended electronics configuration for driving sessions and technical upkeep.  Warning! Not suitable for children under 14 years.

NiMH batteries

Amphi Power Truck Battery Pack, 9.6V NiMH

€21.49

Built around a clearly stated 9.6 V and 600 mAh specification, this NiMH battery pack adds a dedicated power unit for the Amphi Power Truck. The compact pack uses a mini Tamiya plug and fitted power lead, creating a direct connection format that matches the stated application instead of relying on an unspecified connector. As an optional battery, it suits hobby benches that keep a second rechargeable pack ready while another pack is in use or charging. The NiMH cell format gives model enthusiasts a familiar battery type for RC applications, and the 600 mAh rating provides a concrete reference when comparing runtime planning within a compatible setup. The shrink-wrapped pack format keeps the cells grouped in one ready-to-connect unit, while the attached red and black leads make polarity assignment visually clear during handling. The stated 9.6 V rating also gives a precise basis for checking vehicle compatibility before installation. In practical use, this battery pack fits naturally into driving sessions with the Amphi Power Truck, whether as a replacement for an existing pack or as an extra unit prepared in advance. On the workbench, the mini Tamiya connection and defined voltage and capacity make the pack easy to identify among RC power components.

Chargers & charging cables

Ansmann USB/USB-C Power Supply, charger, 45 W

€39.99

The Ansmann USB/USB-C Power Supply 45 W combines dual-port charging with a compact mains format for hobby gear and everyday electronics. With 1 USB-C socket and 1 USB-A socket on the housing, it connects both newer USB-C cables and established USB charging leads in one unit at the bench, in the workshop or on the road. Its technical setup is built around an input voltage of 110 - 240 V AC, a maximum input current of 1.0 A and mains frequency support for 50 Hz and 60 Hz. On the output side, the charger delivers 5 - 20 V DC with up to 3.0 A and a maximum output power of 45 W. That specification makes it suitable wherever compatible devices need a dependable wall power source, whether for charging handheld electronics or powering USB-based accessories between driving sessions. Integrated temperature monitoring adds another control layer during operation, complementing the electrical protection functions already built into the unit. The compact adapter format with EU plug pins keeps the setup straightforward on a wall socket or power strip, while the 14 Years age marking is stated in the product data. In a hobby room, travel bag or charging station, this 45 W power supply adds a clean, practical connection point for compatible USB and USB-C equipment.  Warning! Not suitable for children under 14 years.

Electronics

Control Switch Dumptrailer-Spindle Drive, switch

€16.29

Built for functional model engineering, the Control Switch Dumptrailer-Spindle Drive adds a dedicated control point to a compatible dump trailer setup. The prewired switch assembly is intended to control the gear motor of the spindle drive with shaft joint 500907056, giving the tipping mechanism a clear electrical interface within the model. The wiring layout combines a BEC connector with 2 free cable ends for connection into the drive circuit. Power is supplied through the BEC connector system and supports 7.2 V NiMH or 7.4 V LiPo accumulator packs, which fits established RC power formats for model-building enthusiasts. With an ampacity of up to 5 A, the switch is specified for the electrical demand of the spindle drive application rather than as a generic on off part. The compact switch format with mounted wiring also suits retrofit work, replacement tasks, or planned installation in a custom trailer build. In use, the switch becomes part of the working dump function, where the spindle drive gear motor can be actuated as the trailer mechanism is operated. Age marking: 14 years and over.

RC tools

Double-Sided Tape, black, model accessory

€6.49

Double-sided tape in black brings a simple, workshop-ready fixing aid to model-building and hobby tasks. The adhesive coating on both sides allows parts to be attached between 2 surfaces, while the peel-off release liner keeps each strip ready for clean handling before placement. The strip format shown in the set supports neat use on small-scale projects where a compact contact layer is needed. It can serve as a mounting aid, a fixing layer or a cushioning interface, depending on the specific build task at hand. The black finish keeps the tape visually discreet on darker assemblies and accessories. In a hobby workspace, this kind of material is useful when positioning lightweight components, adding contact pads or preparing repair and fitting work without changing the visible shape of the assembly. Used alongside model supplies and workshop tools, the tape suits ongoing maintenance, detail work and general bench tasks. The 14 Years marking places it within the hobby and enthusiast segment, where precise accessory materials often support careful assembly, adjustment and finishing.  Warning! Not suitable for children under 14 years.

RC remote controls

FS Reflex Stick II, RC remote control, 6-channel

€109.99

The FS Reflex Stick II brings 2.4 GHz control and a classic dual-stick layout to RC vehicles and boats, with 6 channels operated independently through 2 joysticks, 1 ON/OFF/ON button and 1 ON/OFF/ON switch. Its FHSS system uses Frequency Hopping Spread Spectrum for radio transmission, while the included 6-channel receiver completes the core control package. The radio system runs at 6 V from 4 AA batteries and supplies the BEC receiver with 4.8 - 6 V. Servo reverse on 2.4 GHz changes the direction of assigned channels when a servo reacts opposite to the intended command, and the trim function helps dial in channel response with greater precision. A Graupner J/R plug system supports connection within compatible RC setups. The integrated charging socket adds a direct charging connection within the system. Full compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units makes the set a strong match for expanded truck and function-model installations. On the bench, the 6-channel layout supports coordinated setup of steering, throttle and auxiliary functions before the first run. At the lake or on the track, the dual-stick format and extra switching inputs suit models that need more than basic steering and speed control. 4 AA batteries are required separately.

Replacement & spares for combustion models

Fuel Bottle 300 ml, model supplies applicator

€6.69

A 300 ml fuel bottle brings controlled liquid transfer to model workshop routines, with a squeeze format that supports quick handling and a long angled nozzle that reaches tank openings with less repositioning. The translucent bottle body keeps the fill level visible during preparation, while the narrow metal outlet is shaped for targeted flow where broad pouring would be awkward. The bent dispensing tube is suited to model supplies use in compact areas around a chassis, especially where surrounding parts leave little room for a wider container. A black protective cap closes the tip between sessions, helping keep the outlet covered during transport in a pit bag or storage in a tool case. The bottle itself is a dedicated accessory rather than a general container, built around accurate transfer of liquid through a fine outlet and a hand-operated squeeze body. With the 300 ml capacity, fewer refills interrupt maintenance or trackside preparation. On the bench, in the workshop, or at the circuit, this accessory supports clean, direct filling as part of regular model care. The simple bottle, nozzle and cap layout keeps the handling focused on the task, whether preparing a vehicle before a run or topping up between sessions.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow Plug R1, engine accessory, extra hot

€6.79

The glow plug is the ignition point at the heart of a nitro model engine, and this R1 version is specified as extra hot for setups that call for a very hot heat range. Its ultrashort format keeps the part compact, making it suited to engine heads and surrounding layouts where space is limited. As a replacement engine accessory, the plug is designed to thread into the engine head and ignite the fuel mixture during running. The included sealing washer sits between the plug and the engine head to support correct seating at installation. The metal plug body and compact threaded form place it firmly in the technical side of model maintenance, where the right spare part matters for consistent running and service work. The product data states an age marking of 14 years. This kind of component fits naturally into workshop routines such as replacing a worn plug, refreshing an engine before the next run, or keeping a spare in the pit box for tuning changes. In hobby use, a clearly specified R1 extra hot plug gives model enthusiasts a concrete option when an engine setup calls for this heat rating.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Gold Plug 4mm Set, connector set for RC models

€4.69

Gold Plug 4mm Set brings a classic connector format to RC and model electronics with gold-plated contact parts and colour-coded heat-shrink tubes for clean cable finishing. The 4 mm size suits hobby wiring jobs where a compact plug connection and clear polarity marking matter on the bench and in running setups. The set shown includes male and female connector elements together with red and black sleeves, so matched leads can be prepared with insulated ends and easy visual distinction between positive and negative lines. Gold-plated contact surfaces are widely used for soldered power connections because they support reliable electrical contact across repeated plug-in use. The separate metal sleeves and shrink tubes also allow a neat build sequence: solder the lead, fit the insulation, then finish the connection with clear colour coding around the joint. On RC cars, boats or other model electronics projects, this connector set fits naturally into custom wiring tasks, battery lead repairs or workshop stock for fresh cable builds. The compact parts and bench-style handling make it a practical addition for hobbyists who assemble, maintain and adapt their own electrical setups.  Warning! Not suitable for children under 14 years.

Model tools

Hex RC Tools 1.5 mm, screwdriver

€8.99

Small hex fasteners are common across RC and model-building work, and this 1.5 mm Hex RC Tools screwdriver is shaped for that exact task. The hardened steel tip is precision-made to sit cleanly in matching screw heads, supporting controlled turning during assembly, maintenance and adjustment on detailed hobby builds. The lightweight aluminium handle gives the tool a balanced feel, while the ergonomic grip supports steady finger placement through repeated bench work. Its slim shaft helps reach screws set deeper inside compact assemblies, where broader tools can obstruct access or reduce control. As part of the CARSON Tool range, this screwdriver is intended for fine screwing applications rather than general household jobs, making it a focused addition to model workshop equipment. The marked 1.5 mm size also helps keep the right driver close at hand when several tool sizes are in use. On the workbench, it fits naturally into routine RC upkeep such as tightening fittings, making small corrections and handling delicate hardware on model components. For hobbyists working on detailed assemblies, the combination of low weight, precise fit and narrow reach supports clean, careful tool handling.  Warning! Not suitable for children under 14 years.

Model tools

Hexagon Socket Wrench 2.0 mm RC Tool

€8.79

A 2.0 mm hexagon socket wrench belongs on any model bench where small fasteners need a clean, accurate fit. This Carson Modelsport tool combines a precision-made steel tip with a lightweight aluminium shaft, creating a hand tool shaped for controlled turning during detailed RC maintenance and assembly. The hardened steel tip is made to engage screws securely while helping to protect screw heads in repeated use. Its slim shaft reaches into tighter build areas more easily than bulkier workshop tools, which matters when working around compact chassis layouts and closely spaced components. The aluminium handle keeps the tool light in the hand and adds an easy-grip surface for measured input on delicate fastening jobs. That balance of low weight, grip and tip accuracy makes it suitable for routine servicing, setup changes and careful parts installation. On the hobby bench, the 2.0 mm format suits the kind of fine mechanical work that calls for steady handling rather than excess force. It fits naturally into model-building sessions, repair work and regular upkeep of RC vehicles and other detailed assemblies. Age marking: 14 years+  Warning! Not suitable for children under 14 years.

Model tools

Hexagon Socket Wrench 2.5 mm RC Tool

€8.99

A 2.5 mm hexagon socket wrench belongs on any RC workbench where small fasteners and repeatable control matter. This Carson Modelsport hand tool combines a precision-made hardened steel tip with a long, slim driver format that reaches into tighter assembly points while keeping the turning action direct and clean. The shaft is made from lightweight aluminium and shaped for easy grip, giving the tool a balanced feel during fine mechanical work. Hardened steel at the working end is designed to engage screws accurately and help protect the screw head during regular use. The handle shown with a knurled grip texture and accent rings supports a secure hold when careful adjustment is needed on model components, electronics housings or chassis fittings. The 2.5 mm size makes it a focused addition to an RC tool set rather than a generic workshop driver. On the bench, this wrench fits the rhythm of routine model care, from initial assembly to later maintenance and part changes. It works well for hobby sessions that call for compact reach, clear feedback through the handle and dependable control on smaller hex fittings.  Warning! Not suitable for children under 14 years.

Light & sound

LED Light Set Drift, light set, RC accessory

€22.99

Drift cars stand out through attitude as much as speed, and this LED Light Set Drift adds that visual layer with a controller, 10 LEDs and 4 LED tubes arranged for a dedicated drift lighting layout. Front indicators, rear indicators, headlights, rear lights, brake lights and blue underbody lighting give the model a more defined presence once the wiring is installed. The lighting functions are split into specific positions rather than a generic glow. The set simulates left and right front turn signals with 3 mm LEDs and left and right rear turn signals with 3 mm LEDs, while 5 mm LEDs handle the headlight and rear light or brake light functions. Blue underbody lighting runs left, right, front and rear for a 4-way effect that suits sideways driving scenes and display setups between runs. The controller operates on 4-6 V DC with a maximum current draw of 210 mA. A FUTABA connector system is used, and the data states compatibility with TAMIYA models. The module measures 42 x 32 x 13 mm and weighs 44 g, which helps when planning placement inside an RC car shell. Demo mode activates when the transmitter is switched off and all LEDs flash until the RC connection is active again. The scope of delivery includes the LED controller, 10 LEDs and 4 LED tubes. The age marking is 14 years.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Li-Ion Power Battery Mini-TAM, RC boat battery

€21.99

This 7.4 V Li-Ion battery pack brings the right power format to compatible RC boat sessions, with an 850 mAh capacity and Mini Tamiya connection for a clean replacement setup. The compact pack is intended as a replacement battery for the RC boats 500108031, 500108032 and 500108033, keeping the specification aligned with those named models. The battery is supplied as an Accu-pack Li-Ion and uses a 7.4 V configuration paired with 850 mAh capacity, a combination that suits the stated replacement role for these Carson RC boat references. The visible pack labeling also states a maximum charging current of 1 C at 850 mA. Attached leads and connectors are already fitted to the pack, so the battery can be connected to the matching system without adding separate wiring. As with any model-sport power component, the connector format matters, and the Mini Tamiya plug gives a concrete compatibility point beyond voltage and capacity alone. In practice, this battery fits naturally into the regular rhythm of RC boating, whether an original pack has reached the end of its service life or a matching spare is needed for the named models. The 14 years+ marking is stated in the product data, and the battery's clearly defined voltage, capacity and plug type make it a focused choice for hobby setups built around those exact specifications.

Chargers & charging cables

Mini Tamiya Plug Socket Kit, connector set

€4.49

Mini Tamiya plug and socket kit brings a compact 2-pin connector format to RC and model electronics work, with 2 Mini Tamiya plugs, 2 Mini Tamiya sockets and contacts supplied as one set. The white connector housings and separate metal terminals suit wiring tasks where a detachable link between two cable runs is needed. Each housing uses a 2-pole layout, creating a clear plug-and-socket connection for low-voltage applications in model setups. The contacts are handled as separate parts, then crimped to the wire and inserted into the shells to complete the connection. That assembly step makes the set useful for repairs, replacement leads or custom cable preparation where an existing connector needs to be renewed. The compact format also suits installations where connector space is limited and a defined mating shape matters. In workshop use, the set can be kept on hand for RC maintenance, battery lead work or general model electronics tasks that call for a matching connector pair. Ages 14 years and up are stated for the set, fitting the small-part handling and wiring focus of this accessory.  Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Nitroset incl. USB charger, tool set, 14+

€34.49

Nitroset incl. USB charger gathers the core workshop gear for nitro-powered model driving into one practical set for ages 14+. The combination of a 500 ml fuel bottle, dedicated glow equipment and hand tools supports regular preparation, refuelling and trackside maintenance around combustion engine models. At the centre of the set is a glow plug connector with a 2000 mAh NiMH rechargeable battery, paired with a USB charger for repeated use. The charger data names a 350 mA charging current, 0.4 W output, 1-cell 1.2 V NiMH format and an 8 h charging time for the 2000 mA battery pack. Alongside it, the glow plug spanner covers SW 8, 9, 10, 12 and 17, while the wheel nut spanner handles SW 4, 4.5, 5.5 and 7. A cross-head screwdriver and a slotted screwdriver complete the set for fastening and adjustment work. Whether the task is filling the tank before a run, changing a glow plug after use or tightening wheel hardware between sessions, the set keeps the key tools close at hand. The data states compatibility with combustion vehicles on the market, making it a straightforward equipment set for hobby bench use and race-day support.

RC receivers and accessories

Receiver Reflex Stick 2, RC receiver, 2.4 GHz

€42.99

The Reflex Stick 2 receiver brings the core control link of the matching Carson RC system into a compact 45 x 28 x 13 mm format. Designed as a replacement receiver for the Reflex Stick 2 radio system, it combines 6 channels, 2.4 GHz transmission and a clearly arranged connector layout for RC vehicle electronics. The housing carries labelled connections for battery input and channels CH1 through CH6, so the installation points are easy to identify when fitting the unit into a model. An input voltage range of 4.8 to 6 V matches the specified operating window for the receiver and supports integration into the intended radio setup. A setup button is placed directly on the unit, while the LED indicator provides visible status feedback during binding and configuration. This keeps the handling focused on the receiver itself rather than on external programming hardware. In workshop use, the receiver suits repairs, replacement of a damaged unit or the restoration of a Reflex Stick 2 control system to working order. Inside an RC vehicle, the compact footprint helps when space is limited and several connected functions need a clean channel layout. Age marking: 14 years.

RC receivers and accessories

Receiver Reflex Wheel LCD, 7-channel receiver

€35.99

Built as a replacement receiver for the Reflex Wheel LCD 2.4 GHz radio system, this 7-channel unit brings the control link back into compatible RC setups in a compact 35 x 25 x 13 mm format. The small housing, short antenna wire and channel-marked socket strip create a clean technical layout that suits model installations where space and clear wiring matter. The receiver is specified for 2.4 GHz operation and an input voltage of 6 to 11 V. CH1 to CH7 are labelled directly on the unit, making each connection point easy to identify when assigning steering, throttle or auxiliary functions. The visible Analog and Digital selector marking adds another practical hardware detail for matching the receiver to the intended configuration. As a dedicated spare receiver, it is intended for the FS Reflex Wheel LCD 2.4G 7 channel system referenced in the product data rather than as a universal radio component. In workshop use, the compact dimensions help when placing the receiver into tighter chassis layouts, while the marked ports support orderly routing of servo and control leads. Age marking: 14 years. This product conforms to Directive 2014/53/EU.

RC receivers and accessories

Receiver Reflex Wheel PRO 3, RC receiver, 2.4GHz

€29.99

The Receiver Reflex Wheel PRO 3 2.4GHz BEC is a dedicated replacement receiver for the Carson Reflex Wheel PRO 3 BEC RC system. With 5 channels in a compact 45 x 27 x 14 mm format, it brings the core control functions of a model vehicle into a small electronics unit that fits neatly into tight chassis layouts. The black receiver case carries clearly marked ports from CH1 to CH5, making the channel layout easy to follow during installation in compatible RC models. A 2.4 GHz frequency forms the radio link, while the 6 to 8.4 V input range defines the electrical setup for the unit. The housing also shows SET and SW markings, supporting the handling steps needed when integrating the receiver into the matching radio system. As a replacement part, it is intended specifically for the Carson Reflex Wheel PRO 3 BEC system. In workshop use, the compact dimensions help when routing cables through narrow radio boxes or electronics trays in model vehicles. The 5-channel layout also leaves room for functions beyond basic steering and throttle where the compatible setup supports them. Age marking: 14 years.

RC receivers and accessories

Reflex Stick Multi Pro Receiver, RC receiver

€51.99

The Reflex Stick Multi Pro receiver brings 2.4 GHz control technology into a compact replacement unit for the matching RC system. With 14 channels and a housing size of 35 x 26 x 14 mm, it adds extensive connection capacity without taking much room inside a model layout. This spare receiver is specified for 4.8 to 6 V input voltage and is built for the Reflex Stick Multi Pro RC system. The front edge carries clearly marked channel outputs from CH1 to CH14, making the connection layout easy to follow during installation. A dedicated bind button is placed on the receiver for pairing with the compatible transmitter, and the F/S Set function allows fail-safe positions to be stored directly on the unit. The visible Batt. connection marks the receiver power input, while the antenna lead is routed from the housing for signal reception. In workshop use, the receiver suits repairs, system refreshes or the replacement of an existing matched unit in a compatible RC setup. Age marking: 14 Years. Batteries are not included.

RC remote controls

Reflex Wheel X1, RC transmitter, 2.4GHz 2-channel

€47.99

The Reflex Wheel X1 brings 2.4GHz radio control and a classic pistol-grip layout into one focused setup for RC driving. A side steering wheel, trigger throttle and 2 fully proportional channels give fine control over steering and speed, whether the model is lining up for a clean straight or working through tighter corners. At the technical level, the transmitter runs on 4.8 to 6V and pairs with a compact 4-channel mini-receiver measuring 36 x 25 x 15 mm. The receiver power supply supports up to 11V without a BEC, and the Uni connector system J/R broadens compatibility across common hobby installations. A charging socket with positive pole inside is built into the transmitter, and an LED battery status display keeps the power level visible during use. The set is also Tamiya kit compatible, which makes it a practical radio option for many workshop and upgrade projects. Included are a 2-channel 2.4GHz transmitter and a 4-channel 2.4GHz receiver. 14 years marks the recommended age. 4 AA batteries are required separately, so the radio can move straight into bench setup, model installation and the first tuning session once the power supply is in place.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

ReflexWheel PRO3 Receiver, RC receiver, 2.4GHz

€31.99

The ReflexWheel PRO3 receiver brings 2.4 GHz control, 5-channel connectivity and a compact 45 x 27 x 14 mm format into one electronics upgrade for compatible RC vehicle setups. Designed as a replacement receiver for the ReflexWheelPro3 BEC waterresistant radio system, it fits the focused, technical character that model-building enthusiasts expect from workshop-ready running gear. Its channel bank is clearly marked from CH1 to CH5, with a separate BEC connection area that helps keep wiring assignments readable during installation. That layout supports the typical control path in model vehicles, from steering and throttle to added switching functions on extra channels. The stated input voltage of 6 to 8.4 V gives a concrete operating range for integration with matching onboard electronics. A dark translucent case keeps the receiver body compact while the attached antenna lead exits cleanly from the housing for straightforward placement inside the chassis. In practice, this receiver suits repair work, system replacement and the refresh of an existing RC setup built around the ReflexWheel PRO3 platform. Whether a workshop bench is set up for maintenance or a vehicle is being returned to running condition after an electronics swap, the compact footprint and labeled ports keep the installation process focused and easy to follow.

NiMH batteries

RX Battery 6V 3000mAh, battery pack, NiMH

€24.99

This 6 V RX battery pack brings a dependable power source to compatible RC electronics and model systems, with 3000 mAh capacity in a rechargeable NiMH format. The pack is built as a wrapped multi-cell unit with attached connection leads, giving hobby setups a ready battery option for receiver-based applications where a separate power pack is required. The battery uses a TAM and JR connection layout, which makes it suitable for compatible systems that match these plugs. Its black wrapped casing holds the cylindrical cells together in one compact assembly, while the fixed red and black cables provide the connection path from pack to electronics. As a receiver battery, it suits workshop preparation, replacement planning, or keeping an additional charged pack on hand for longer sessions with compatible models. Batteries are not included. On the bench, the pack works well as a spare power source for maintenance days, setup changes, or quick swaps between runs in compatible RC vehicles and electronics layouts. The 6 V output and 3000 mAh rating make it a clear, easy-to-match choice when the model setup calls for this battery specification.

RC electric motors & controllers

Sirius Max 2 ESC, speed controller, digital setup

€54.99

The Sirius Max 2 ESC brings compact speed control and clear setup logic to electric RC vehicle builds. Its digital 1-touch calibration uses the SET button and red, green and blue LEDs to store neutral, full forward and full brake or reverse positions, creating a direct link between transmitter input and motor response. With an input range of 4.8 to 12.0 V, the controller works with 4 to 10 NiCd or NiMH cells and with 2S to 3S LiPo packs from 7.4 to 11.1 V. The integrated battery type selection switches between automatic NiCd or NiMH cutoff and automatic LiPo cutoff before power-up, and the blue LED stays lit in LiPo mode. A 2.0 kHz frequency and 1.5 A BEC current support the electrical layout, while the compact housing measures 40 x 36 x 12 mm and weighs 54 g including wires. Factory-fitted leads connect battery, motor, switch and receiver, with color coding shown as black for battery negative, red for battery positive, blue for motor negative and yellow for motor positive. In use, the controller suits hobby builds that need clear installation feedback and adaptable drive behavior. Failsafe mode signals with a flashing red LED and returns the controller to neutral when receiver signal is lost or incorrect, helping maintain controlled response during running sessions. Age 14 Years.  Warning! Not suitable for children under 14 years.

Electronics

Spindle Drive Gearbox-Motor, RC accessory

€55.99

Electric spindle actuation adds a clear mechanical function to model dump trailers and crawler loaders, and this Spindle Drive Gearbox-Motor is built for exactly that task. The geared motor drives the spindle system so the body can be tilted electrically or the load can be unloaded through powered movement rather than manual handling. The unit is designed for use with the spindle drive with shaft joint N° 500907056, where the motor output feeds the spindle mechanism through geared rotation. A square metal output shaft forms the connection point for the drive system, while the integrated gearbox and motor housing keep the assembly focused on controlled motion for lifting tasks. Operation is handled through a remote controlled switch or the CARSON switch N° 500907070, making it suitable for model-building layouts that call for a separately triggered dump function. The stated dimensions are 700 mm in length, 185 mm in width and 235 mm in height. In a working model setup, the geared drive supports realistic tipping action on a dump trailer or electric unloading on a crawler loader. Age marking: 14 Years.

Replacement & spares for combustion models

Universal Wrench Tool for Model Workshop Use

€6.79

A universal wrench belongs in any well-organised model workshop, and this cross-shaped tool brings several turning functions together in one compact metal format. The polished finish and 4-way layout create a clear, practical hand tool for adjustment, maintenance and general bench work around model equipment. Each arm provides a different end, while the centre adds a hex opening for another handling option. That combination supports quick changes between fittings without reaching for a separate tool each time. The metal body gives the wrench a direct, controlled feel in the hand, and the compact shape sits neatly in a toolbox, drawer or workshop tray between service sessions. Rather than taking up space with single-purpose tools, this format keeps several common functions grouped in one place. On the model bench, the wrench suits routine setup work, small maintenance tasks and general workshop organisation. It also works well as a handy spare in a field box or service kit, ready for the moments when a simple turning tool keeps work moving without interruption.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Viper Marine 25, speed controller, 6-12V ESC

€52.99

The Viper Marine 25 speed controller is designed for RC boat setups that need compact electronic control with marine-focused protection. Its 100% waterproof construction, 25 A current limit and input range of 6.0-12.0 V/DC give this ESC a clear place in electric model boating, where wet running conditions and dependable throttle response matter at the same time. A 1 kHz drive frequency shapes the motor control, while the onboard 1.5 A BEC supports the connected radio system from the controller itself. Forward and reverse are both available, and the reverse function can also be adjusted or disabled to suit the layout and handling style of the model. All adjustments run through a single set up button, keeping configuration direct on the bench before the hull goes back on the water. Integrated fail safe, motor short protection and overload protection add concrete electronic safeguards, and the included wires plus on-off switch support clean installation into the boat. In use, the controller suits electric marine models that need a compact ESC between battery, motor and radio gear. Whether fitted into a sport hull or a scale boat, the 6-12 V/DC operating range and marine-specific protection features support controlled running across repeated sessions on the water.  Warning! Not suitable for children under 14 years.

Batteries

1.5V Baby C LR14 Alkaline Set, battery pack

€3.99

This 1.5V Baby C LR14 Alkaline Set contains 2 C-size cells for compatible battery-powered equipment in the RC and hobby space. The Baby, LR14 and MN1400 markings identify the same battery format, making the set easy to match with devices that specify one of these standard designations. The alkaline cell chemistry is named directly in the set title, which helps when a device requires disposable 1.5V batteries rather than a rechargeable pack. With 2 cells in the pack, the set covers equipment that runs on a pair of matching C batteries and offers a practical replacement option for existing setups. The cylindrical cell format follows the common C-size standard used across many portable devices. The product data also states that batteries are not included with the main device, so this set can serve as the separately purchased power source where that battery type is required. In use, the clear voltage and size markings simplify battery selection before a driving session, workshop check or accessory setup. For hobby benches, field boxes and household storage alike, this 2-pack keeps the required Baby C LR14 format close at hand when compatible equipment needs fresh cells.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 All Terrain Wheel-Set, wheels, 4WD

€26.99

A fresh wheel and tyre setup can change how a 1:10 off-road model meets the ground, and this 1:10 All Terrain 4WD Wheel-Set brings that focus to the running gear with 4 matching mounted units. Each wheel combines a black tyre with a white disc rim, creating a clean contrast that stands out on the bench and on the track while keeping the full set visually consistent across the vehicle. The tread uses deep block sections with directional-style grooves, a layout aimed at loose and mixed terrain where the contact patch needs defined edges to work into the surface. Because the tyres are already mounted on the rims, the set suits quick workshop swaps when an existing setup is worn or when a second tread option belongs in the pit box. The 4-piece format covers the full vehicle rather than a partial axle change, which keeps handling balance more even from front to rear. As an accessory in the Models & Accessories range, the set fits naturally into regular maintenance and setup planning for 4WD RC platforms. On gravel paths, packed dirt or changing off-road ground, a dedicated wheel set makes it easier to keep one configuration ready for the next run. The age marking is 14 Years, and the set works well as a practical spare or replacement for hobby sessions centered on tuning, upkeep and outdoor driving.

RC tires & rims

1:10 Off-Road Cross Country, wheel set

€27.99

A fresh wheel and tyre setup can change both the stance and the running character of an RC build, and this 1:10 Off-Road Cross Country wheel set brings that change in a matched 4-piece format. The combination of off-road tyres and chrome-look rims gives 1:10 models a clear cross-country style while keeping the running gear consistent across all 4 corners. The tyre profile uses pronounced tread blocks that suit loose terrain and uneven ground, making the set a practical choice when a road-biased pattern no longer fits the route. The rim design adds circular cutouts and beadlock-style detailing for a more rugged visual finish. As a dedicated wheel set, it also works well for rebuilds, maintenance jobs or planned setup changes between different driving surfaces. The 1:10 scale format keeps the application focused on models in that class, which helps when preparing spare running gear for the workshop. Whether the goal is replacing worn wheels after repeated outdoor runs or preparing a second set for dirt tracks and rougher paths, this 4-wheel package adds a straightforward way to keep a model ready for the next session. Age 14 years+

RC tires & rims

1:10 Y-Design2 Wheel Set, RC wheels, gold chrome

€22.49

A 1:10 on-road chassis gains a sharper road look and a ready-to-run wheel package with the Y-Design2 wheel set in gold and chrome. The set includes 4 fully bonded wheels built for RC vehicles that use a 12 mm standard hex wheel hub, combining straightforward fitment with a striking multi-spoke finish. The tyre construction is tuned for paved running, with foam inserts working behind the road tread to support the casing as the car loads up through acceleration, braking and direction changes. That combination helps the tread hold its shape more consistently on the surface instead of feeling vague when conditions are less than favourable. The partly chrome-plated rim edge adds contrast to the gold centre, while the airy Y-design keeps the wheel face visually open and gives touring, street and drift-style bodies a more technical appearance. Age marking: 14 Years. Mounted on a road car shell, the set shifts the whole visual balance of the chassis, especially on race, tuner and performance-inspired builds. It also suits refresh work on a used runner where worn tyres or dated rims have taken the edge off the car's look and road manners.

Electronics

1:14 12V Spotlight, model accessory, rectangular

€26.99

Rectangular auxiliary lamps are a familiar detail on working trucks and utility vehicles, and this 1:14 set brings that look into scale form with 2 matching 12V spotlights for model projects. The black lamp bodies, clear textured fronts and compact stem mounts create a purposeful add-on that suits technical vehicle builds. Each light unit is supplied as a separate wired component, making the pair suitable for custom placement wherever the model design calls for extra lamp detail. The rectangular lens format gives a different visual character from round lamps and fits especially well with truck, construction and service-style subjects. The visible internal light element behind the transparent cover adds depth to the front view, while the long cables support integration into compatible electrical layouts. As a dedicated 1:14 accessory, the set is aimed at hobby builds where scale appearance and added lighting equipment are part of the overall finish. Mounted on a roof bar, fixed to a bumper or positioned as work lights on a body section, the 2 lamps expand the visual equipment of a model without changing its core layout. For display builds and running vehicles alike, the pair adds a crisp technical accent that complements detailed 1:14 scenes and conversions.

Models & trailers

1:14 2-Axle Dolly rigid, trailer dolly

€324.99

Road-train combinations depend on the converter dolly between truck and trailer, and this 1:14 2-Axle Dolly rigid brings that transport link into model form with a compact 365 mm chassis and a width of 185 mm. The tandem-axle layout, front drawbar and upper coupling plate create the unmistakable silhouette of a working dolly in freight and Gigaliner scenes. The frame carries 4 wheels and uses a rigid axle setup, while dummy air springs add extra mechanical detail around the running gear. A support leg is integrated at the front section, so the dolly can be positioned as a standalone unit when not attached in a combination. The upper fifth-wheel style coupling area and the towing eye at the drawbar show clearly how the unit is intended to sit between connected trailer sections. Length and height adjustment provide scope to align the dolly within different 1:14 truck layouts. Assembly is required, which makes the chassis and linkage details part of the hands-on model-building appeal. Placed behind a tractor unit or between trailer sections, the dolly suits freight convoys, logistics displays and workshop-style builds with a commercial transport focus. A trailer hitch and a cross brace trailer hitch for the Mercedes-Benz 1850 Overnight Express are required separately.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Alum. Rear Underride protec., accessory

€53.99

A rear underride protection bar is a familiar detail on full-size tippers, and this 1:14 aluminium version brings that same technical look to a scale truck build. The set is designed as an accessory for a 1:14 tipper and uses metal components to create a defined rear assembly with workshop character. The pictured parts show 2 mirrored hinged brackets, 1 flat mounting plate with a large central cutout, 3 cylindrical spacer posts and fastening hardware with black screws and silver hex nuts. That layout gives the assembly several connection points and a stepped construction rather than a single cast piece. The aluminium finish keeps the mechanical character visible, while the separate spacers and plate help form distance and alignment within the mounted structure. For model-building enthusiasts, that means a rear section with more depth, more visible hardware and a more engineered appearance. On a shelf, in a workshop setting or as part of a completed truck project, the accessory adds a purposeful scale detail to the back end of a tipper model. The 1:14 format keeps it aligned with large-scale truck scenes, and the multi-part metal construction suits hobby builds where the visible structure matters as much as the finished look.

Basic accessories

1:14 Alum. Trailer, model accessory, pallet case

€109.99

In 1:14 scale, this Alum. Trailer palette case brings the look of a working freight setup into model truck scenes with a sheet metal body, a flat upper loading surface and a compact lower pallet store. The silver-coloured finish and the side panels with circular cutouts give the accessory a technical warehouse character that suits trailers, depots and loading areas. The construction is arranged around two clearly separated handling zones. The upper deck forms a loading platform for staging cargo operations, while the lower compartment stores the included 6 pallets in a stacked layout. Guide rails and the open front make the pallet area easy to integrate visually into forklift, trailer and warehouse scenarios, and the pull-out section adds a concrete handling element for loading and unloading sequences. Instead of acting as a loose scenery piece, the case creates a defined station within a logistics layout, with storage, access and presentation combined in one compact accessory. Placed beside a trailer, at a loading bay or inside an industrial yard scene, the pallet case helps turn static vehicle displays into more detailed transport settings. Age recommendation: 14 years and up.

Basic accessories

1:14 Aluminium Stanchions, trailer accessory

€59.99

Long timber, poles and similar cargo call for a trailer setup that looks the part. This 1:14 stanchion set adds steel and aluminium load supports to compatible trailer builds, giving transport scenes a more defined utility character and a clear scale-model finish. The construction combines steel and aluminium parts and is intended as an upgrade for trailer projects rather than a standalone model. The stanchion bracket can be loosened via 2 grub screws, then repositioned or removed as required, which supports different loading layouts on the trailer bed. With dimensions of 205 mm in length, 190 mm in width and 10 mm in thickness, the set brings a compact, clearly specified format to workshop planning and installation. The set is compatible with the 1:14 3-Axle Stanchion Trailer 500907629 with new suspension and the 1:14 2-axle stanchion-trailer Riedler 500907622. A manual is included. Beyond those two trailer references, the stanchions can also be fitted to self-made trailers where the build concept allows it. That opens the door to custom forestry, transport or utility layouts with upright supports placed to suit the chosen cargo and the overall trailer design.

Electronics

1:14 Beacon Light Bar Set FH16, RC light set

€144.99

The FH16 is a familiar sight in long-haul truck styling, and this 1:14 Beacon Light Bar Set brings that look into a model build with a dedicated roof light unit and matching control electronics. Designed for 7.2 V and 12 V systems, the set adds a technical lighting function that suits detailed RC truck projects where visible wiring, voltage handling and installation layout all matter. The elongated light bar sits in a grey housing with rounded ends and carries a central LED board fitted with multiple SMD LEDs. Two mounting holes are built into the housing for screw installation, and the cable lead routes the light unit to the separate module. On the controller, terminals marked 1, 2, 3, 4 and + organise the connections, with 4 outputs rated at 500 mA each. A servo-style plug supports integration into the RC setup, while the DIP switch allows selection between Uout=Urc(BEC) and Uout=6.0-14 V. That combination suits scale truck projects where auxiliary lighting is part of the overall finish rather than an afterthought. The set can be worked into a fresh FH16 build or added during an electronics refit, giving the model a more defined roofline and a functional light signature that matches the technical character of RC truck detailing.

Basic accessories

1:14 Construction Platform Long, truck body

€299.99

Built for the TAMIYA Volvo FH16 wood transporter, this 1:14 Construction Platform Long changes the model from a timber hauler into a flatbed body for building materials. The conversion is based on a CNC-milled steel frame with an integrated auxiliary frame, creating a solid mounting structure with the original attachment points and screw connections. The body combines a steel base carrier with CNC-milled aluminium dropsides, each finished with detailed surface engraving on both sides. Powerful Neodym magnets are embedded almost invisibly into the dropsides, so the side panels close cleanly without exposed latches. The loading area measures 550 x 195 x 130 mm, and the approx. 75 mm dropside height gives the body the tall, purposeful look of a working construction transporter. At 2,400 g, the assembled structure adds substantial presence to the chassis, while the real wooden floor application brings a contrasting deck surface that can be finished to match the chosen build style. On the bench, the conversion offers a detailed body project with functional side access and clearly defined metal components. Mounted on the chassis, the open platform suits scenes with pallets, beams or general site cargo, while the fold-down layout supports realistic loading and unloading displays. Rear lights contained within the construction kit can be installed with the separately available aluminium underride guard with rear light holder.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Construction platform short, truck body

€299.99

Heavy transport bodies define the character of a working truck, and this 1:14 Construction platform short brings that look into a compact model format. The short flatbed body combines silver-toned side panels, an open load area and a utility-focused layout that gives a model truck the appearance of a site or materials carrier. The body section is built around metal panels with horizontal embossing, visible screw points and upright corner posts that echo full-size commercial truck construction. A front bulkhead rises behind the cab area, visually separating the load space and strengthening the industrial profile. The cargo floor is shown with a wood-look finish, adding contrast to the metallic side structure and reinforcing the working-truck style. Fold-down style side walls shape the bed perimeter, while the rear section carries realistic utility details that suit display builds and scale transport setups. The multi-part construction also makes this body an engaging addition for model-building enthusiasts who enjoy assembling and detailing truck components. On a finished chassis, the short platform format suits compact heavy truck conversions, workshop builds and construction-themed layouts where a realistic cargo bed matters as much as the cab. Combined with scale loads or used as a clean flatbed display body, it gives 1:14 truck projects a purposeful commercial look.

Basic accessories

1:14 Conversion Kit Materialtrailer, trailer kit

€299.99

This 1:14 Conversion Kit Materialtrailer turns the 3-axle Flatbed Trailer III Steel into a building materials trailer with a more enclosed transport layout and a distinctly commercial road-haulage look. The conversion centres on CNC-milled aluminium dropsides with detailed surface engraving, giving the bodywork a sharper scale finish than plain panel sections. Each of the 9 dropsides is functional, so the trailer can be opened section by section for loading and unloading. The locking system uses neodymium magnets, which keep the side panels closed without interrupting the clean exterior lines. Each dropside is carried on 4 hinges made from 1 mm steel, adding a clearly defined mechanical structure to the moving sections. The dropside posts are plugged in and can be removed when wider access to the bed is needed. With a weight of 2,500 g, the conversion adds substantial hardware to the trailer body rather than decorative trim alone. The set is made to fit only the Carson 500907650 1:14 3-axle Flatbed Trailer III Steel, making it a focused upgrade for model builders who want a different transport configuration on the same base trailer. All parts required for the conversion are included in the scope of delivery, so the trailer can be rebuilt into a materials-hauling version with matching scale detail and working side sections.

Basic accessories

1:14 Cross Brace Trailer Hitch, model accessory

€26.49

In 1:14 scale truck building, the frame hardware shapes how a model comes together visually and mechanically. This cross brace trailer hitch for TAM frame layouts adds a dedicated coupling and support component that fits naturally into detailed commercial vehicle builds. The assembly combines a black metal bracket with an articulated linkage section and visible screw fastening points. Multiple mounting holes on the main bracket create several attachment positions on the frame, while the cross brace layout helps define the rear chassis area with a more technical, scale-focused look. The central joint and long arm indicate adjustable positioning, which is useful when aligning the hitch within a custom truck configuration. As a separate model accessory, the part is aimed at builders who refine frame details rather than leaving the rear section plain. Mounted on a 1:14 truck chassis, the hitch becomes part of a more complete trailer-ready setup for workshop sessions, display builds or ongoing conversion projects. The component also suits enthusiasts who expand an existing TAM frame with extra coupling hardware and more defined rear-end structure.

Basic accessories

1:14 Fliegl Stone Master, spindle drive

€209.99

The 1:14 Fliegl Stone Master spindle drive brings a working mechanical function to a scale trailer build with a metal linkage assembly, cylindrical spindle body and articulated mounting points. Its silver machined construction and exposed pivot hardware give the mechanism the technical look that model-building enthusiasts expect from a functional upgrade rather than a decorative part. At the core of the assembly, the spindle body connects to a forked linkage and round mounting flange, so movement is transferred through several joints instead of a single fixed arm. The instruction data names hardware sizes including 3x10 mm screws, 3x5 mm screws, a 6x12x0.2 mm washer and 10x6 mm spacers in 13.9 mm, 29.9 mm and 9.8 mm lengths, showing how the mechanism is aligned across its pivot points. This gives the build a more technical character, with each spacer and fastener supporting the geometry of the moving assembly. An optional gearbox motor can be fitted for powered operation. Radio gear, a battery pack, a charger and paints are required separately. Mounted into a 1:14 agricultural or transport model scene, the spindle drive adds visible motion and a more authentic operating sequence to tipping action. The exposed linkage, flange mount and multi-part arm structure also make it a strong choice for builders who enjoy mechanical detail that can be seen while the model is in use.

Basic accessories

1:14 LR634 Bucket Protective Grid, Accessory

€68.49

Built for 1:14 scale model work, the LR634 Bucket Protective Grid adds a distinct construction detail to the bucket area with an aluminium part shaped for this specific application. The grid format introduces the slotted guard look associated with working machinery and gives the front assembly a more technical finish in display views. Within a model-building project, this accessory supports accurate restoration, replacement or visual refinement where the bucket section needs the correct protective element. The dedicated LR634 designation keeps the fit focused on the matching model context rather than a generic universal part. Aluminium adds a crisp surface character that suits painted and unpainted construction scenes alike, while the formed profile and mounting holes point to straightforward integration into the intended assembly position. On workshop shelves, diorama bases or completed construction vehicle displays, the part helps the bucket area read as a complete unit rather than an unfinished section. It also suits ongoing rebuilds where worn or missing details need to be brought back into line with the rest of the 1:14 model.

Electronics

1:14 LR634 Electronic Control Unit, RC module

€509.99

Built for the LR634 at 1:14 scale, this electronic control unit concentrates the model's main wired functions in one compact module. The housing measures 85 x 53 x 21 mm, weighs 82 g and combines 5 electronic speed controllers with lighting control and a reversing beeper, creating a central interface for a complex tracked machine layout. The wiring system is arranged for multiple dedicated tasks inside the model. Receiver inputs cover channel 1 to channel 6, and the connected outputs are assigned to the right track motor, left track motor, lift spindle drive, tip spindle drive and rear ripper spindle drive. A rotary potentiometer trims the track balance by up to +/- 10%, which helps correct straight-line running when one track pulls harder than the other. LED status indicators work with 2 push buttons for transmitter alignment and neutral setting. The light connection supports up to 1 A, and the battery input is designed for 7.2 V to 8.4 V systems. In use, the module suits detailed installation projects where several drive and auxiliary functions need coordinated control in one crawler loader model. A battery pack is required separately. The unit also supports voltage monitoring for 7.4 V 2S Li-Po operation, with optical and acoustic low-voltage warning signals during running.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 LR634 Gear Train Drive Set, model part

€209.99

The Liebherr LR 634 is known as a crawler loader format built around traction and drive transmission, and this 1:14 gear train drive component set is made for that mechanical core. Developed for the Liebherr Laderaupe LR 634 No. 500907111, it brings the drivetrain focus of the full model into a dedicated parts set for model-building enthusiasts working on a matching scale project. As a transmission drive set, it supports the functional side of the build where moving force through the drivetrain matters more than surface detailing. The 1:14 scale keeps the set aligned with the proportions of the intended LR 634 model, while the dedicated component purpose makes it suitable for replacement work, mechanical completion or planned workshop preparation. Within a hobby bench setup, this kind of set belongs to the stage where the model's internal drive layout takes shape through the correct matching parts. In practice, the set suits restoration of a used build, completion of an unfinished model or preparation of spare drivetrain components for later maintenance. Age 14 Years. For enthusiasts working on the Liebherr Laderaupe LR 634 No. 500907111, it adds a focused transmission element to scale-accurate model work.

Electronics

1:14 LR634 Gearboxmotor, model spare part

€83.99

Built for the Liebherr LR 634 in 1:14 scale, this gearbox motor serves the powered shovel and rear ripper functions with a dedicated drive layout for the model's working mechanisms. The compact unit combines an electric motor with a metal gearbox and output shaft, creating the geared motion needed where direct motor speed would be too high for controlled actuation. The technical data gives a clear picture of its operating range: rated voltage is 7.2 V, with a working voltage from 5 to 8 V. No-load speed reaches 560 rpm, while constant speed is specified at 440 rpm. A 63:1 transmission reduces speed at the output and supports the stated constancy torque of 105 mNm for mechanical movement under load. Electrical values include 360 mA no-load current and 1.4 A steady current, which helps when matching the replacement unit to the existing installation and drive setup. At 26 g, the motor remains compact for integration into the LR 634 mechanism without adding unnecessary mass to the moving assembly. As a model spare part, it suits repair work, maintenance, or the restoration of powered shovel and ripper operation on the tracked loader. Age 14+

Basic accessories

1:14 LR634 Lift & Shovel Spindle Drive Set

€689.99

The LR634 Lift & Shovel Spindle Drive Set is a 1:14 accessory created for the Liebherr Laderaupe LR 634 No. 500907111. Its spindle-drive layout is dedicated to the lift and shovel area, bringing a function-led mechanical upgrade to this scale crawler model. Within a model-building project, the set focuses on the front working equipment where lifting and shovel movement define the machine's character. The spindle-drive concept points to controlled actuation for these assemblies and fits the technical theme of construction-machine modelling. Because the set is specified for the Liebherr Laderaupe LR 634, it stays closely tied to the geometry and purpose of that particular model rather than serving as a generic add-on. The 1:14 scale keeps the accessory aligned with the proportions of the compatible crawler and makes it a relevant choice for detailed workshop planning. In a display-oriented build, the drive set adds substance to the functional side of the model. In an active hobby setup, it supports a more equipment-focused configuration of the LR 634 front end, with the lift and shovel area placed at the centre of the build.

Basic accessories

1:14 Plateau Goldhofer, model accessory set

€46.99

Heavy haulage trailers from Goldhofer are closely tied to specialist transport, where low platforms and modular structures are built to carry demanding loads. This 1:14 Plateau Goldhofer set brings that workshop character into model form with separate body components that build up a defined section for a scale transport project. The set is presented as an assembly-based accessory for the 1:14 Plateau Goldhofer and includes a large square panel with 4 mounting holes, a long narrow panel, 4 matching side elements, plus black screws and silver hex nuts. The grey moulded sections show recessed groove detailing, while the white panel surfaces create a clear contrast that makes the structural layout easy to read once assembled. The individual parts are arranged for fastening rather than clipping, so the build develops through aligned placement and fixed connections. Age marking: 14 Years. On a hobby bench, the set suits careful fitting, fastening and finishing as part of a larger scale truck or trailer scene. In a completed display or running model setup, the added section extends the technical look of the Plateau Goldhofer with the measured, mechanical character that makes transport models so appealing.

Basic accessories

1:14 Riedler accessory kit, trailer fittings

€71.99

Heavy transport trailers rely on visible working details, and this 1:14 accessory kit brings that character to the Riedler 2-axle stanchion trailer. Built as an optional upgrade, the set adds functional-looking hardware that gives the trailer a more complete scale presence in workshop scenes, loading layouts and road transport displays. The kit combines a spare wheel assembly, an aluminium spare wheel holder, 2 compressed air tanks and a load securing kit. The compressed air tanks are cut from solid aluminium, giving these parts a distinctly technical finish that suits the mechanical look of a commercial trailer. The spare wheel is specified as a wide chrome wheel with wide tyres, adding a strong visual contrast beside the trailer frame and underbody areas. Together, these components extend the trailer with details that model-building enthusiasts often look for when refining a transport rig beyond the base configuration. Age 14 Years. As part of a 1:14 setup, the accessory kit fits naturally into detailed truck and trailer projects where mounting hardware, air system elements and cargo securing parts help shape a more convincing overall build. The set works especially well in scenes focused on freight handling, parked trailer presentation or a fully equipped road-going combination.  Warning! Not suitable for children under 14 years.

RC truck accessories

1:14 Servo Mount 2SGB Arocs, servo mount set

€31.49

Built for detailed 1:14 truck work, the Servo Mount 2SGB Arocs Plate is a dedicated servo mount set for the steering axle of 907700. The set brings together the core hardware needed for this installation, including 2 metal angle brackets, a long threaded rod and 2 rod-end connectors, creating a defined mechanical basis for steering linkage setup. The two brackets use multiple mounting holes to support positioning within the axle area, while the threaded rod and rod-end style ends allow the linkage connection to be adjusted as the steering geometry is set. Alongside these main parts, the set includes 10 hex nuts, 4 washers and 10 screws for fastening and assembly. This makes the pack useful not only for first installation, but also for replacing worn or missing mounting hardware on an existing build. The compact component mix focuses on the mechanical connection itself rather than decorative parts, which suits workshop-oriented model projects where fit and linkage alignment matter. On the bench, the set supports repair, rebuild and upgrade work on compatible 1:14 truck models. It fits naturally into hobby sessions centered on axle setup, steering correction and chassis maintenance, where the right brackets, connectors and fastening parts keep the installation process focused and precise.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Trailer E-Sup.Legs, trailer support legs

€129.99

Support legs are a defining detail on a scale semi-trailer, and this 1:14 Trailer E-Sup.Legs set brings that parked-trailer function into a model build with a compact machined metal design. The rectangular housings, visible inner guide area and round foot plates create the technical look of trailer landing legs while adding a working support component to compatible Carson trailer projects. The set is intended for 1:14 Carson trailer models and fits the compatible ranges named in the data, including the 3-axle trailer chassis, Fliegl Stone Master dump trailer, Goldhofer BAU STN-L3 low loader, curtain-side semi-trailer, flatbed semi-trailer, log stake semi-trailer and box semi-trailer. The construction is prepared for the optional 500907199 gearbox motor, with 2 motor units required for a powered setup. The motor is sold separately. Assembly includes screw fixing, alignment of the support-leg mechanism and a 3 mm drilled mounting hole where required by the installation guide. Once fitted, the support legs add a realistic uncoupled-trailer stance to workshop scenes, yard layouts and road-transport displays in 1:14 scale. They also suit builders refining an existing trailer with more authentic operating detail, whether the model is set up as a dump trailer, low loader or 3-axle semi-trailer.

Basic accessories

1:14 Trailer Pallet Case, trailer accessory

€139.99

Built around the look and function of a real trailer storage compartment, this 1:14 pallet case adds a convincing logistics detail to scale transport models. The housing is made from laser-cut and CNC-bent sheet steel, giving the accessory a crisp, technical form that suits commercial trailer scenes and underbody mounting positions. The interior offers room for up to 24 pallets, so the case can serve as more than a visual add-on when a trailer setup calls for organised cargo handling. A flap with neodymium magnets closes the compartment and recreates the handling of a working storage box with a clear mechanical action. The set includes 6 Euro pallets, which establish the loading theme immediately and give the compartment a filled, operational appearance. Electronic components can also be accommodated in the box when a model build needs that space. Assembly instructions are included. 14 years+ marks the recommended age. The pallet case is designed as an extension for the Carson 3-Axle Stanchion Trailer and the 3-Axle Flatbed Trailer III. In a depot layout, loading bay scene or road transport display, the metal case and stacked pallets add the kind of small-scale detail that makes a trailer combination look equipped for daily freight work.

RC truck accessories

1:14 Volvo 750 taillight PCB, model accessory

€85.99

Heavy road trucks rely on clear rear light signatures, and this 1:14 taillight PCB set brings that look into model form for the Volvo 750. The set combines 2 electronic boards with matching left and right housing parts, adding a defined rear lighting assembly that suits detailed truck builds and scale-focused upgrades. Each board is wired and fitted with several light positions, including red, white and amber elements, so the rear section can be equipped with distinct light zones rather than a single undifferentiated lamp area. The supplied black housings include separate insert pieces and feature the mounting structure needed to position the electronics within the rear body area. Because the set is specified for 7.2 V and 12 V operation, it can be integrated into compatible model truck electrical layouts that use either voltage standard. The mirrored arrangement of the 2 assemblies also matches the left and right side structure typically required at the rear of a scale truck. This accessory suits 1:14 truck projects where the rear end is being rebuilt, upgraded or finished with more defined lighting hardware. It also fits workshop-style builds that focus on wiring, body detailing and scale presentation as much as driving.  Warning! Not suitable for children under 14 years.

Electronics

1:14 Volvo FH16 XL750 position lamp LED set

€64.99

Position lamps are a defining detail on modern road trucks, and this 1:14 LED set is tailored to bring that look to the Volvo FH16 XL750 in model form. The layout combines compact lighting electronics with cable harnesses and connectors, giving hobby builders a dedicated way to add illuminated marker accents that suit the scale and subject. The set is specified for 7.2 V to 12 V systems, which places it within common hobby electronics setups for scale trucks and related conversions. Twisted wire leads help keep the cable runs organised, while the small green circuit boards provide the base for the lamp functions in a format that fits more easily into confined body sections. Multiple connector ends support integration with existing model electrics where matching connections are used. As an accessory for 1:14 models, the focus stays on lighting detail rather than drive components or body hardware. Installed on a Volvo FH16 XL750 build, the LEDs add visible scale character when the truck is displayed on a shelf, photographed in a workshop setting or run as part of a detailed RC lorry setup. The electronic layout also suits enthusiasts refining a truck project with extra lighting functions that sharpen the overall look of the finished model.  Warning! Not suitable for children under 14 years.

RC truck accessories

1:14 Warning Bar/Strobe Set, model accessory

€114.99

Heavy transport trucks often carry roof-mounted warning lights to mark out their role on demanding road and site work, and this 1:14 Warning Bar/Strobe Set brings that visual language into a scale build. Made for Scania 8x4/4 and Scania SLT8x4 models, the accessory set adds an illuminated light signature that changes the character of the cab with a more purposeful working-truck appearance. The combination of a long warning bar and separate strobe lights creates a multi-part roof layout rather than a single light point. Amber translucent housings shape the signal effect clearly, while the compact format suits the proportions of a 1:14 truck model. As a model supply accessory, the set is aimed at builders who want to refine an existing vehicle with extra lighting detail tied to a specific Scania configuration. The focus stays on the roof area, where warning lights are especially visible in front-facing display angles and during running sessions. On a shelf, in a workshop-style diorama, or out on a driving course, the lighting set gives the truck a more specialised presence. It suits service, haulage, and site-support styling themes and adds a distinct finishing touch to a detailed Scania build.  Warning! Not suitable for children under 14 years.

LiPo batteries

3.7V 500mAh LiPo Battery, RC accessory pack

€12.99

This RC battery accessory is defined by clear core data: 3.7 V voltage, 500 mAh capacity and LiPo battery chemistry for compatible Yairo applications. As a spare or replacement battery, it gives hobby users a straightforward way to match an existing setup against the stated electrical values instead of relying on broad category labels. The compact specification makes this battery relevant wherever the original setup calls for the same 3.7 V and 500 mAh combination. LiPo chemistry is widely used in RC systems where low weight and compact dimensions matter, and the stated values provide the practical reference point for checking fit within a compatible vehicle or accessory platform. The product data identifies this battery under the Yairo designation and places it within electric and battery car sets and accessories, which helps position it clearly as a power component rather than a complete vehicle. In day-to-day hobby use, a matching spare battery can support planned replacement cycles or extend bench preparation between running sessions when a compatible setup is already in service. The age marking in the data is 14 Years.

NiMH batteries

7.2V 2700mAh NiMH Battery Pack, RC accessory

€29.99

This 6-cell sub-C NiMH battery pack brings a defined 7.2 V and 2700 mAh power setup to compatible RC vehicle builds, with a hump version layout shaped for models such as Sand Scorcher and Buggy Champ. The compact pack format, visible wiring and TAMIYA connector system suit hobby setups where the battery must match both the chassis space and the installed plug standard. Its 110 x 48 x 42 mm dimensions give a clear reference when checking battery compartments, while the approximate 335 g weight helps place the pack within the overall vehicle setup. NiMH chemistry makes it a rechargeable option for repeated running sessions, and the 6-cell arrangement forms the stated voltage through a pack shape commonly used in classic buggy layouts. The connector is already attached to the red and black leads, so the pack is prepared for the matching connection type rather than requiring a separate plug change. Age marking: 14 years. As a replacement pack, it suits workshop shelves, spare battery rotation and rebuilds of compatible electric RC models. In running use, the stated voltage, capacity and pack shape support a setup planned around known dimensions, known connector format and a battery layout intended for the specified vehicle types.  Warning! Not suitable for children under 14 years.

NiMH batteries

7.2V 4800mAh NiMH Race Battery, RC battery

€43.99

Built for hobby-grade electric models, this 7.2 V NiMH race battery combines a 4800 mAh capacity with a Tamiya connector system for use in RC vehicles and other model building applications. The bundled cylindrical-cell pack format keeps the power source compact and easy to place in compatible chassis layouts, while the cable lead and plug connection support straightforward installation in suitable battery compartments. Nickel-metal hydride chemistry makes this pack a practical choice for enthusiasts running compatible electric setups that call for a 7.2 V battery format. The stated maximum charging current of 4.8 A supports a quicker return to the bench or track when paired with suitable charging equipment. Its high-current discharge characteristic suits applications that place a stronger demand on the power source, whether in on-road models, buggies or other electric RC platforms that match the connector and voltage requirements. With age marking 14 Years, the pack fits naturally into hobby-focused RC use and workshop setups. It works as a replacement battery for compatible vehicles or as a power option for other model building projects that use the same voltage class and connector style.

NiMH batteries

8.4V 800mAh NiMH Battery, Pickup Crawler spare

€27.99

This 8.4 V NiMH battery pack is specified as a replacement power source for the Pickup Crawler models 500404240 and 500404241. With 800 mAh capacity and a TAMIYA connector, it is built around the connection format and voltage class stated for that crawler application. The NiMH cell setup makes this pack a straightforward spare for RC running sessions where a dedicated second battery helps keep the vehicle in use between charges. The shrink-wrapped pack format groups multiple cells into one compact unit, while the attached lead and plug keep the connection layout ready for the named model range. As a replacement battery, it focuses on the core requirement of the vehicle rather than universal fit, which keeps compatibility clear and specific. The scope of delivery states 1 battery pack. In use, the pack serves as the direct energy source for the compatible Pickup Crawler, whether replacing a worn battery or extending driving time with a charged spare kept on hand. For over 30 years, Carson has specialised in remote-controlled vehicles, building detailed, durable models made for plenty of driving fun

NiMH batteries

9.6V 1500mAh Power Battery TAM, RC battery

€20.49

This 9.6 V NiMH battery pack brings compact rechargeable power to RC vehicles and other model building applications that use a Tamiya connector system. With 1500 mAh capacity, the pack supports running sessions that call for a straightforward power source in a familiar hobby format. The nickel-metal hydride cell format makes this pack a practical match for setups built around 9.6 V battery operation. Its Tamiya connector system links the pack to compatible electronics through the attached lead, keeping installation focused on the connection standard already used in many RC and workshop applications. The stated maximum charging current is 1.5 A, giving a clear specification for charger matching. Product data also states an age marking of 14 years+. Whether used as a replacement pack for an RC vehicle or kept ready for other model building tasks, this battery fits neatly into hobby benches, pit boxes and regular running routines. A suitable charger is required separately.

Batteries

AA Battery Set, 1.2V 2100mAh, 4 rechargeable cells

€19.99

This 4-cell AA battery set brings a straightforward power solution to compatible RC accessories and everyday electronic equipment. Each rechargeable cell delivers 1.2 V and 2100 mAh, giving the pack a clearly defined output for devices designed for the Mignon HR6 standard. The NiMH chemistry makes the set suitable for repeated charging and regular reuse, while the ready-to-use format allows the cells to be fitted into compatible equipment without an initial charging step. The AA size is one of the most widely used battery formats, which helps when matching replacements to battery trays, transmitters or household electronics that specify HR6 or Mignon cells. With 4 cells in the pack, the set also suits devices that run on multiple AA batteries at once. On the workbench, in RC support equipment or in everyday devices such as keyboards, computer mice or cameras, the set covers common battery needs with a consistent cell format. The compact pack size also makes it practical to keep a charged spare set close at hand between driving sessions or general use.

Batteries

AAA Alkaline Battery Set, 4-pack cells

€2.49

Compact electronics often depend on a simple, reliable power source, and this set provides 4 AAA alkaline batteries with 1.5 V per cell in the common micro format. The LR03 and MN2400 designation makes the battery type easy to identify when matching replacements for compatible equipment. Each cell uses alkaline chemistry and comes ready for immediate use, so the set suits devices designed for non-rechargeable batteries. The cylindrical format follows the standard AAA size used across many small electronic applications. In practical use, the 4-cell pack covers both single-battery devices and equipment that needs several matching cells at once. The clear type marking also helps when keeping spare batteries on hand for routine swaps. Typical usage includes remote controls, clocks and radios, where the AAA format is a familiar requirement. The 4-pack also fits general household storage, keeping replacement cells available when compact electronics need fresh power.

Remote-controlled systems

Akuma Radio 2.4GHz, transmitter, 2-channel RC

€26.99

The Akuma Radio 2.4GHz transmitter brings classic pistol-grip RC control to compatible models with a compact hand-held layout, a side steering wheel and a trigger for throttle and brake input. Marked controls for REV, NOR, BIND, SET, CH2 and CH3 place the core functions directly on the housing, keeping the operating sequence clear during setup and driving. The transmitter is listed as a 2-channel unit in the product data, while the housing markings also show CH2 and CH3 functions alongside D/R ST, ST TRIM and TH TRIM controls. That layout gives model-building enthusiasts direct access to steering trim, throttle trim and steering dual-rate adjustment on the transmitter itself, so the response can be matched more closely to the connected RC model. The 2.4 GHz R/C system supports modern wireless operation without a trailing antenna arrangement, and the pistol-grip form keeps steering and speed control separated into distinct hand movements. Used with Akuma, Bokusa or Drakuro RA models, this transmitter suits driving sessions where clean steering inputs and quick throttle control matter. The recommended age is 14 years and up. Batteries are required separately.  Warning! Not suitable for children under 14 years.

RC tires & rims

Beach tyre set CV-10B, wheel set for 1:10 models

€33.99

Loose sand calls for a different contact patch than packed dirt, and this Beach tyre set brings that terrain focus to compatible 1:10 RC vehicles on the CV-10B chassis. The set contains 4 matching wheels with chrome rims and a 90 mm diameter, creating a consistent setup for replacement work or a dedicated sand-running configuration. The tread pattern is shaped for soft ground, where paddle-style lugs can dig in and support drive on surfaces that quickly overwhelm a road-biased tyre. The chrome wheel finish adds a bright visual contrast against the dark rubber and gives the running gear a more customised look. As a complete 4-piece set, the wheels can be fitted across the full vehicle rather than mixed with older tyres of a different wear level. The stated CV-10B fit keeps compatibility clear for builders working around that chassis platform. This wheel set suits maintenance sessions, seasonal terrain changes and fresh project builds that need a sand-ready setup kept separate from everyday running gear. It also works well as a spare set on the shelf, ready for the next outing on loose ground where tread choice matters most.

Model tools

Body Driller 1-17 mm, hobby tool, metal tip

€26.49

A body driller is a staple on the model bench when bodyshell work calls for clean, accurately placed openings. This Carson Modelsport tool uses a pointed conical metal tip that widens holes from 1 mm to 17 mm, making it suited to careful preparation of thin model body material for fittings and mounting points. The tapered working end supports gradual enlargement instead of jumping straight to one fixed diameter, which helps when a shell needs a precise opening matched to the part being installed. A knurled metal handle adds control in the hand and gives the grip needed for steady pressure during marking, starting and widening each hole. The protective cap covers the tip when the tool is stored, so the pointed end stays protected between bench sessions and while packed with other workshop gear. On RC and scale model projects, this kind of hand tool fits naturally into body preparation, finishing and adjustment work. It suits hobby tasks where a clean opening and controlled placement matter, whether a fresh bodyshell is being prepared or an existing shell needs a new mounting point. Age recommendation: 14 years and up.

RC tires & rims

Buggy Tire/Wheel Set, RC accessory, 1:10

€22.49

A 1:10 buggy gains a clear off-road character with this tyre and wheel set, built around 4 mounted units in a 2+2 layout and finished with chrome-look rims. The combination of black all-terrain tyres and silver 5-spoke styling gives the running gear a purposeful buggy stance while keeping the scale fit aligned with 1:10 models. The tread uses pronounced knobby blocks rather than a smooth road pattern, making this set suited to loose and uneven ground where a buggy needs more mechanical bite. As a wheel and rim replacement set, it covers both practical maintenance and visual refresh work on compatible RC buggy platforms. The mounted format means the tyres and rims already come together as complete running units, so the focus stays on fitting the set to the vehicle. The black tyre finish and bright rim surface create strong contrast, which stands out on off-road bodies and race-inspired builds. In workshop use, the set suits routine wheel changes before dirt-track sessions, gravel running or general terrain driving. It also fits shelf-to-track projects where a buggy needs a fresh wheel setup that matches its off-road role and 1:10 scale proportions.

Chargers & charging cables

Charging Adapter TAMIYA Plug to T-Plug Cable

€5.79

Different connector standards often decide whether an RC setup can run at all, and this charging adapter cable bridges that gap by pairing a T-plug connector with a TAMIYA plug in one compact lead. The short cable format with red and black wires creates a straightforward link for model electronics where matching battery and vehicle connections matter. In use, the adapter allows battery packs with a T-plug connector system to be connected in models that use a TAMIYA actuator connection. That makes existing packs usable across more than one connector standard without changing the installed plug on the model side. The same cable also supports charging tasks by connecting a charging lead with TAMIYA plug to battery packs fitted with a T-plug connector. Heat-shrink insulation near the red plug adds a clean finish around the cable transition, while the 2 different connector ends make the function immediately clear during setup. On the workbench, in a pit box or alongside regular running gear, this cable serves as a practical link between battery, charger and model when plug systems do not match. The 14 years marking is stated for this accessory, fitting its use within hobby-grade model equipment and electrical setups.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Charging Cable T-Plug for RC Battery Charging

€8.99

Charging Cable T-Plug adds a direct link between charger hardware and compatible RC power components, with a black T-Plug connector on one end and 2 banana plugs on the other. The red and black lead layout keeps the polarity path easy to follow on the bench, while the compact cable format suits regular charging routines in model sports setups. The connector arrangement is geared to practical workshop use: the banana plugs slot into suitable charger or power supply terminals, and the T-Plug end connects to matching battery packs or electronics that use this format. The paired wire design keeps both lines together for tidy handling during charging preparation, storage, and transport with other RC accessories. As a models supplies accessory, the cable fits naturally into hobby equipment collections where connection standards matter as much as the charger itself. In use, the lead supports charging stations, maintenance benches, and general RC electronics handling where a T-Plug connection is required. The age marking is 14 Years, matching its place in hobby-oriented model accessories rather than entry-level play ranges.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Charging Cable Tamiya Gold, charger lead

€6.49

A straightforward charging link matters when battery care is part of the model routine. This charging cable combines a Tamiya-style 2-pin connector with 2 banana plugs, creating a clear connection path between compatible battery packs and charging equipment at the workbench. The red and black banana plugs provide visible polarity distinction during setup, and the insulated plug housings support controlled handling while connecting to charger terminals. As a dedicated charging lead, the cable is shaped around connector compatibility rather than extra functions, which keeps its role clear in model workshop use. The compact adapter format also fits neatly into existing charging gear without adding unnecessary bulk to the bench. In regular hobby use, the lead supports charging tasks for compatible model batteries and charger outputs that rely on these connector types. The 14 Years age marking places it within model-building and RC workshop environments where accessories are selected to match established battery and charger systems.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Devil Bike JST Battery, RC accessory, 3.7V 500mAh

€9.49

The Devil Bike JST battery brings a compact Li-ion power source to compatible RC use with 3.7 V, 500 mAh and 1.9 Wh in a small wired pack. Its blue-wrapped cell, red and black leads and black JST plug create a clear, purpose-built layout for models that use this connection format. The specified maximum charging current of 0.5 A gives the charging setup a defined technical limit, which helps keep the battery matched to suitable charging equipment. As a rechargeable cell, it is built for repeated use rather than single-use replacement, making it a practical part of regular running sessions. The visible polarity leads support correct connection handling, and the plug can be separated for storage as indicated on the battery label. The battery is intended as an RC accessory rather than a standalone vehicle component, so the key value lies in its fit with compatible Devil Bike JST applications. On the bench, this battery suits routine swaps between charging and driving sessions where compact dimensions and a direct plug connection matter. In compatible RC models, the stated 3.7 V output and 500 mAh capacity provide the core electrical data needed when selecting the right replacement battery.  Warning! Not suitable for children under 14 years.

Electronics

Drive Gear Liebherr Track Loader Spare Part

€59.99

This drive gear is made for the Liebherr LR 634 track loader and serves as a dedicated spare part within the model's drive system. The component works with the gear motor to transmit motion into the loader's running mechanism, giving model-building enthusiasts a precise replacement for maintenance or repair work. The product data states that 2 pieces are needed for the application, and this set contains 2 drive gears. That makes it suitable for replacing the required pair in the Liebherr LR 634 setup without mixing unmatched parts. As a model supplies component in the Models & Accessories range, it fits naturally into workshop stock for ongoing servicing of a working scale model. Whether a worn gear is being exchanged or a drivetrain is being restored to operating condition, this spare part supports focused repair sessions on the Liebherr LR 634. The clearly defined application helps keep parts selection straightforward when the drive system calls for the specified gear pair.

Chargers & charging cables

Easy Charger LiPo 2,2A, charger, 25 W

€21.99

The Easy Charger LiPo 2,2A brings compact charging hardware and dedicated LiPo functions into one bench-ready unit for model-driving sessions. With 25 W maximum output power, 2.2 A maximum charging current and a Balancer XHP connector, it is configured for 1 x 2S and 1 x 3S LiPo packs named in the technical data. Its lithium storage function adds a separate operating mode beyond standard charging, making it useful when packs are not heading straight back into a vehicle after a run. Delta peak cutoff manages the charging endpoint as part of the charging process, while the AC 100-240 V input voltage gives the unit a broad mains range for home workshop use. The set includes the charger, a power cable and a manual. 14 Years marks the recommended age. Between maintenance at the workbench and preparation before the next outing, this charger fits neatly into the routine around RC battery care. It suits hobby setups that use compatible 2S or 3S LiPo packs and need a straightforward charger with clearly stated electrical data.

Chargers & charging cables

Expert Charger LiPo Compact, charger, 900mAh

€21.99

The Expert Charger LiPo Compact brings a focused charging setup to the workbench with support for lithium batteries, an XHP balancer plug-in system and automatic shutdown after the pack is full. Its compact housing, side ventilation slots and clearly marked CELL1, CELL2 and CELL3 indicators keep the charging function easy to read during hobby use. Designed for 2-3S lithium packs, the charger works with an input voltage range of 110-240V and reaches a maximum charging current of 0.9A with 10W maximum output power. The balancer function promotes gentle charging by tracking the cells through the XHP connection rather than treating the pack as a single undifferentiated unit. This makes it a practical match for model-building enthusiasts who run compatible battery-powered vehicles and want a straightforward charger for regular bench sessions. The included charger and instructions keep the contents clear and focused. On the hobby table, the compact format fits easily beside a vehicle, battery pack and tools without taking over the workspace. Between driving sessions, it covers the routine task of recharging compatible lithium packs with a simple mains-powered setup and a clear end point once charging is complete.  Warning! Not suitable for children under 14 years.

RC remote controls

FS Reflex X1, 2.4 GHz radio system, 2-channel

€46.99

The FS Reflex X1 brings classic wheel-style RC control to cars and kits that need precise 2.4 GHz radio handling. Its 2 fully proportional channels work through a side steering wheel and trigger layout, so steering and throttle inputs can be adjusted smoothly across the full control range instead of switching between fixed positions. At the transmitter, servo reverse is available on both channels to invert steering or throttle direction when a model setup requires it. Separate trim functions for steering and throttle help correct the neutral position, and dual rate for both channels limits servo travel for a more measured response. The transmitter operates on 4.8 to 6 V and includes a charging socket with the positive pole inside. An LED battery display shows the transmitter status at a glance during use. The included 4-channel mini receiver measures 36 x 25 x 15 mm, uses the J/R Uni connector system, and supports receiver power up to 11 V without a BEC. This radio system suits Tamiya kit compatible setups and other RC vehicle builds that need compact receiver dimensions and adjustable control behaviour. A 2-channel 2.4 GHz transmitter, a 4-channel 2.4 GHz receiver and a handbook are included. 4 AA batteries are required separately.

Electronics

Gearboxed Motor Low loader/Goosneck 22mm

€99.99

This 1:14 gearbox motor is made for low loader and gooseneck model applications where compact powered movement is part of the build. The 22 mm format combines a black motor housing, a silver gearbox section and a protruding output shaft, creating a clearly defined drive unit for technical model installations. The geared layout converts the motor's rotation into usable torque at the shaft, which makes it suitable for mechanisms that need controlled movement rather than direct high-speed output. Two electrical contact tabs provide the connection point to the model's power system, while the compact cylindrical form helps when space inside a trailer or functional assembly is limited. As a dedicated component for model supplies, this motor fits enthusiast projects that add working functions to transport models or replace an existing drive unit with the same application. In workshop-based RC builds, the motor can be integrated into low loader or gooseneck mechanisms that depend on powered rotation through a gearbox. The age marking is 14 years, and the technical layout suits hobby-focused model construction with a clear emphasis on functional mechanical detail.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow Plug Rossi R6, engine part, cold plug

€13.99

The glow engine remains a defining part of nitro RC driving, and the Rossi R6 brings that workshop detail down to one compact engine component. This cold-rated glow plug uses a threaded metal body, a contact tip for the glow igniter and a separate copper sealing washer for installation in the engine head. As a replacement part, the R6 supports the ignition process in model combustion engines by heating at the plug tip during starting. The copper washer sits beneath the plug to seal the seating surface at the cylinder head. Its compact format makes it easy to keep as a spare in a pit box alongside other engine service parts. The clearly designated R6 version also helps hobbyists match the required plug type during routine maintenance, engine refreshes or tuning-related replacement. In practical use, this kind of engine part belongs in the regular service cycle of nitro-powered RC models, whether the session involves track running, test starts after storage or preparation before the next fuel fill. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow Plug Rossi R7, glow plug, cold range

€14.49

The Glow Plug Rossi R7 brings a core engine service part into model workshop routines with a cold heat range specification and a compact threaded format made for model combustion engines. The metal plug body, hex section and top contact point give this spare part the exact functional shape needed for installation and ignition within a nitro engine setup. During maintenance, the threaded section seats the plug in the engine head while the copper sealing washer closes the joint at the mounting point. This combination supports a clean replacement process when an existing plug is worn or when engine tuning calls for the R7 cold specification. The separate washer is part of the fitted assembly and belongs directly to the plug's sealing function rather than to packaging or storage. The clearly defined component format also makes it easy to identify within a spares box for regular workshop use. In RC and model engine care, a replacement glow plug belongs among the small parts that keep running sessions on schedule. The Rossi R7 suits bench servicing, trackside maintenance and planned engine refresh work where the required cold range is already part of the setup. Age marking: 14 years.  Warning! Not suitable for children under 14 years.

Light & sound

LED Light Set Race, light set, 1:10 RC accessory

€22.49

The LED Light Set Race brings race-style lighting functions to 1:10 RC model cars with a compact controller and 12 connected LEDs. Front indicators, rear indicators, headlights and rear or brake lights are assigned to dedicated positions, so the body gains a more realistic light pattern when the model is wired into the vehicle electronics. The module runs on 4-6 V DC with a maximum current of 210 mA and uses a FUTABA plug system that works with TAMIYA models. The controller measures 42 x 32 x 13 mm and weighs 44 g, which helps when fitting electronics into tighter touring car or race body shells. The wiring layout links the light module with receiver channels CH1 and CH2 as well as the steering servo and speed controller, so the lighting responds within the model's existing control setup. A cable set is included alongside the LED control module and instructions. When the transmitter is switched off, the integrated demo mode activates and all LEDs flash, making the full setup visible on the bench or during display pauses between runs. Age 14 years. The set is intended for hobby use in model cars and adds a technical finishing touch to race builds, body conversions and detailed RC workshop projects.  Warning! Not suitable for children under 14 years.

NiMH batteries

Magic Machine NiMH Battery Pack, RC accessory

€23.99

The Magic Machine uses a dedicated optional power source, and this NiMH battery pack is specified with 9.6 V, 1000 mAh and a Tamiya plug for that role. Those core figures define the pack clearly for RC hobby use and place the focus on the connection standard and electrical data rather than on generic battery wording. NiMH chemistry gives this pack its stated battery type, while the 9.6 V rating and 1000 mAh capacity identify the output and reserve available from the pack itself. The Tamiya plug is the named connector in the data, which matters when matching the battery to the required socket on the vehicle side. Delivery includes the Accu-pack NiMH, so the included contents stay concise and specific. The product data also marks this battery as an optional battery for the Magic Machine, making its intended application explicit without implying broader compatibility. Within an RC setup, a clearly specified spare or replacement battery helps keep preparation focused on the right voltage, capacity and connector format. For hobby benches, club sessions or home running time with the Magic Machine, this pack adds a direct, model-linked battery option based on the stated technical data.

RC receivers and accessories

Micro Fail Safe, RC accessory, waterproof

€21.99

Signal loss can end a run in seconds, especially in fast RC cars or on the water. The Micro Fail Safe waterproof adds a defined response to that moment with a compact 26 x 17 x 6 mm housing and an in-line layout built for model installations where every millimetre counts. The unit is designed for RC cars and boat models and activates a pre-programmed servo position when the transmitter fails or the model moves out of range. That mechanism gives the connected servo a fixed fallback action instead of leaving its behaviour undefined. The waterproof housing supports use in environments where spray, splashes or damp conditions are part of the setup. Operating voltage from 4.8 to 6 V fits common receiver systems in this class. Low voltage detection is integrated and can be disabled when the chosen configuration calls for a different response. The J/R servo connection cable keeps installation straightforward within existing receiver and servo layouts. In a chassis, the module can be placed where space is limited; in a boat hull, the sealed case suits confined electronics compartments. Age 14+  Warning! Not suitable for children under 14 years.

Batteries

Mono LR20 Alkaline Battery Set, 2-pack

€4.69

Mono D batteries remain a staple power source for many larger handheld and RC-related devices, and this set provides that familiar format in a straightforward 2-pack. Each cell is a 1.5 V alkaline battery in the Mono D LR20 size, also identified by the MN1300 designation, for equipment built around this standard battery class. The cylindrical cells are intended for devices that specify non-rechargeable D batteries, so the key detail is the exact format match rather than an adapter or special connector. Mono, LR20 and MN1300 refer to the same battery size family, which helps when checking compatibility across different device markings. The pack contains 2 matching cells, a practical quantity for equipment that uses a pair at the same time. The alkaline construction is supplied ready for immediate use. Batteries are not included with the main Carson set, making this separate battery pack a direct way to add the required power source where the correct D-cell format is needed. In use, the set suits battery compartments designed around the larger Mono form factor in RC accessories and other compatible equipment. Keeping 2 identical 1.5 V cells together also supports a clean replacement cycle when both batteries in a device are changed as a pair.

Li-ion batteries

Night Racer 2.0, replacement battery, 7.4 V

€19.99

Built as the matching replacement power pack for the Night Racer 2.0, this Li-Ion battery brings the specified 7.4 V output and 1200 mAh capacity back into the running setup of the compatible RC car. The compact pack uses a JST connector and carries an energy rating of 8.88 Wh, giving model-building enthusiasts a clearly defined electrical specification for the stated vehicle range. As a dedicated spare battery, it is intended for the Night Racer 2.0 versions listed in the data: 500404249, 500404250 and 500404251. The Li-Ion format combines the named voltage and capacity in one rechargeable pack, while the connector layout follows the stated JST standard for the matching installation point. This keeps replacement choice focused on concrete compatibility details rather than guesswork. The battery is supplied as a standalone component for the power system and is suited to restoring the original drive setup when the existing pack needs replacing. In workshop prep, between charging cycles, or as part of regular RC maintenance, this battery fits naturally into the routine around a Night Racer 2.0. The clearly stated 7.4 V, 1200 mAh and JST specification makes it easy to match with the compatible model versions before the next run.

Model tools

Polycarbonate Scissors, hobby tool, precision cut

€6.50

Polycarbonate body shells are a defining part of many RC builds, and clean trimming sets the tone for the finished look. These Polycarbonate Scissors are made as a dedicated hobby tool for cutting polycarbonate, pairing stainless steel blades with a compact format that suits detailed shell work. The narrow blade shape helps when following printed cut lines around wheel arches, window sections and body contours. Fine pointed tips reach into tighter corners where broader scissors can feel clumsy, so openings and edge transitions can be refined with more control. The stainless steel construction gives the cutting area the crisp feel needed for repeated trimming passes on Lexan material, while the black handles keep the tool easy to guide during short, careful cuts. Age marking: 14 Years. On the workbench, the scissors suit the stage between removing the shell and preparing it for paint, decals or final mounting. They also fit later adjustment work when arches, posts or openings need a precise correction after test fitting, keeping the focus on neat edges and accurate body preparation.  Warning! Not suitable for children under 14 years.

NiMH batteries

Race Battery TAM, battery pack, 7.2V 2100mAh

€21.49

A rechargeable NiMH battery pack with 7.2 V and 2100 mAh brings dependable energy to compatible RC vehicle setups and keeps the focus on driving time rather than frequent swaps. The blue shrink-wrapped pack, black end caps and wired layout give the battery a clear workshop-ready format that suits the practical character of model sport equipment. The pack uses a white 2-pin TAM connector and attached red and black power leads, so the electrical connection is already integrated into the battery assembly itself. As a race battery, it serves as a direct power source for suitable electric model cars and related hobby vehicles that match this connector standard. The rechargeable design makes it useful both as a replacement pack for an existing setup and as an additional battery for longer track sessions. The declared conformity documentation references Regulation 2023/1542 EU and EN62133-1:2017. In use, the 2100 mAh capacity supports repeated laps, practice runs and general RC driving with fewer interruptions than a depleted pack allows. Kept as a charged spare in the workshop or track bag, this battery pack adds flexibility whenever one run ends and the next starts soon after.

RC receivers and accessories

Receiver Reflex Pro 3 Nano 2.4G, RC receiver

€28.99

The Receiver Reflex Pro 3 Nano 2.4G brings full RC control into installations where every millimetre counts. Its compact housing measures 35 x 20 x 13 mm and weighs 6 g, making it a practical choice for model vehicles and boats with limited internal space. The receiver works on 2.4 GHz and is designed for Carson Reflex PRO 3, Reflex Stick 2 and Multi PRO radio systems, excluding 500501004. A short antenna wire extends from the unit, while the connector side is clearly marked for CH1, CH2, CH3 and AUX to keep wiring straightforward during installation. The documented input voltage is 6 V. Binding is carried out through the pair pins, and the LED indicates the process status during setup. The fail-safe function is configured only on channel 2 with the binding cable sequence described for the unit. In compact chassis, narrow hulls or tightly packaged electronics trays, the small format helps integrate radio control hardware without crowding the layout. That makes this receiver a strong fit for hobby builds that need Carson system compatibility in a light, space-saving format.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex 6/14Ch Switch 2, switch module, 2 outputs

€39.99

The Reflex 6/14Ch Switch 2 adds 2 switchable functions to an RC setup through a compact switch module measuring 16 x 14 x 4 mm and weighing about 10 g. Connected directly to the receiver, it responds to a button, switch or joystick and turns a single channel into a practical control point for added electrical loads. The 2-way module evaluates switch position rather than long or short duration, making the switching logic straightforward for installations that need 2 clearly assigned outputs. Each separate NPN output uses a 200 mm blue silicone cable and switches up to 2.5 A, with a maximum switching voltage of 16 V/DC. The module draws its own power through the 300 mm servo cable with UNI connection system, while the 200 mm black negative cable can be connected directly to the battery or a distribution terminal. Input voltage is 4 to 8 V/DC, with 5.0 to 5.5 V/DC supplied from the receiver, and input current is about 18 mA at 5.0 V/DC. In RC trucks, crawlers, work vehicles or scale builds, the module suits added lighting or other electrical functions that need reliable on-off control from the transmitter. At higher loads, the black negative cable is connected to the distribution terminal or drive battery to help protect the receiver during operation.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Rossi 4-Stroke Glow Plug for Model Engines

€13.99

The Rossi 4-Stroke glow plug is a dedicated replacement part for model engine setups that use a 4-stroke configuration. Its clearly named application keeps workshop selection straightforward when a compatible engine needs a fresh ignition component for maintenance, servicing or planned spares. Within model supplies, a glow plug is one of the small but essential engine parts that belongs in a well-prepared RC tool kit. This version is identified specifically as a Rossi 4-Stroke type, which helps separate it from other plug variants intended for different heat ranges or engine layouts. The compact threaded metal component is easy to store alongside other workshop essentials and suits hobby benches, pit boxes and field repair kits where quick access to the correct spare matters. The product data places it in Models & Accessories and Models Supplies, aligning it with ongoing engine care rather than a one-time build step. The stated age marking is 14 Years. That fits the hands-on context of model engine maintenance, where replacement parts, tuning work and regular servicing are part of the hobby routine around RC models and their running gear.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Rossi R8 Glow Plug, engine accessory, extra cold

€16.49

High-compression nitro engines place heavy demands on ignition parts, and the Rossi R8 glow plug is specified for exactly that kind of setup. This extra cold glow plug is designed for high-performance motors and for fuel with more than 22% nitro, giving hobbyists a clearly defined heat range for engines that run under demanding conditions. The glow plug uses a high-quality platinum coil, a key component in the ignition process inside a model engine. Its threaded metal body fits as a service and tuning part, while the separate copper washer supports a sealed installation at the cylinder head. Rather than acting as a general-purpose spare, the R8 is aimed at setups where compression, fuel blend and plug temperature need to work together. That makes it a useful choice for planned maintenance, engine refreshes and heat-range changes within a nitro tuning routine. On the bench, the Rossi R8 suits replacement work on RC model engines that need an extra cold specification. In running setups built around high nitro content, it gives enthusiasts a dedicated plug option for keeping the ignition system matched to the engine's demands.  Warning! Not suitable for children under 14 years.

RC servos

Servo CS-3, RC servo, low-profile waterproof

€23.99

Compact dimensions matter in tightly packaged RC builds, and the Servo CS-3 brings that advantage with a low-profile housing, metal gears and waterproof construction in one control component. The flat form leaves more space beneath body shells and around steering assemblies, which is especially useful where chassis layouts limit servo height. The CS-3 operates on 4.8-6 Volt and uses a JR plug for connection to compatible RC electronics. Its stated 3 kg rating gives a clear reference point for steering or control tasks in suitable model applications, while the 0.16 specification points to responsive movement for precise input transfer. Metal gearing supports the servo's internal drive path, and the included servo horn set expands the available linkage setup options right from installation. The housing shown with a 3-wire lead and compact top output shaft layout suits the practical demands of model cars, boats and other radio-controlled builds where clean routing and controlled movement matter. In a touring chassis, crawler conversion or other space-conscious project, the low-profile format helps keep the installation neat without giving up key control hardware. Wet running sessions, splash-prone surfaces and mixed-condition track days fit the waterproof design, while the horn options support different connection points during setup.  Warning! Not suitable for children under 14 years.

RC servos

Servo CS-6, RC servo, waterproof metal gear

€20.99

The Servo CS-6 brings regular-size format, waterproof construction and a metal gear train into one RC servo for model applications that need controlled movement under load. With 6 kg output and a JR plug, it suits installations where a standard servo must slot cleanly into existing RC layouts for steering, throttle or other linkage-driven functions. The black housing carries a central output shaft topped with a cross horn, and the included horn set adds both a single-arm option and a 4-arm servo horn with multiple mounting holes. That layout allows different linkage connection points and helps tune the travel to the mechanics of the model. Rubber grommets support the mounting points during installation, and the supplied screw secures the horn to the servo shaft. The short designation also states a speed value of 0.2, adding another concrete reference point for hobby setups that balance force and response. In an RC car, boat or other model with servo-operated controls, the CS-6 fits the role of a compact actuator that converts radio commands into precise mechanical movement. The waterproof build makes it a practical choice for running sessions where spray, wet grass or puddled surfaces are part of the route.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

T-Plug plug kits, connector set, 3 pairs

€8.99

T-Plug plug kits bring a compact high-current connector format to RC and model wiring, with 3 pairs supplied for fresh builds, repairs, or replacement work. The black connector housings use a 2-pin layout with gold-coloured contacts, creating a clear connection point for power leads in hobby electronics. Each pair is designed for soldered cable installation and is accompanied by shrinking tube pieces that cover the finished wire ends after assembly. Reverse polarity protection is integrated into the connector shape, so the plug orientation is defined by the housing itself rather than by loose marking alone. That makes the set useful wherever battery leads, ESC wiring, or general power connections need a matched plug and socket format. The compact form also suits model layouts where cable routing space is limited. On the workbench, the set supports routine maintenance as well as custom wiring jobs across RC vehicles and other model applications. With 3 pairs in one pack, several circuits can be equipped in the same standard, or spare connectors can be kept ready for later service work. Age 14 years.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

tio Marine 15, speed controller, brushed 6-12V

€41.99

The tio Marine 15 brushed speed controller is built for RC boat installations that need compact motor control, waterproof construction and support for 6-12V operation. Designed for brushed DC motors up to a 15A load, it brings measured throttle response to marine setups where steady low-speed input and clean reversing behaviour matter on the water. Its control system uses 4-quadrant operation, so the motor stops fully before changing direction. That sequence creates balanced response around the neutral point and supports careful handling during docking, tight turns or slow approach work. The controller is programmable through the set button, with reverse selectable as on or off to suit either forward and reverse running or forward-only use. Battery compatibility covers LiPo as well as NiCAD, NiMH and lead acid packs, giving broad scope for different boat electrics. LED indications support setup and status checks, including calibration, battery mode and failsafe status. In a typical installation, the controller links battery, receiver and motor through clearly assigned positive and negative leads, making it a focused choice for brushed marine drive systems. Built-in failsafe returns the controller to neutral on signal loss, while motor short circuit protection and thermal overload protection support reliable running when load conditions become demanding.

RC electric motors & controllers

tio Storm X NoLimit speed controller, ESC

€58.99

The tio Storm X NoLimit speed controller brings compact RC power management into a 40 x 35 x 12 mm format with a weight of 55 g including cable. Its waterproof design, integrated fail safe and built-in protection functions make it a focused electronics upgrade for model layouts that need dependable throttle control, braking and reverse handling. Calibration works through a single setup button and an LED-guided sequence rather than a bank of separate adjustments. The controller supports forward, brake and reverse, with reverse able to be switched off when a brake-only setup suits the model better. NiMH and LiPo battery types are supported across 4 to 8 cells and 4.8 to 9.6 V, while the 3.3 kHz drive frequency and 1.5 A BEC round out the technical package. Short-circuit protection and overload protection are built in, and the unit comes complete with wires plus an on off switch. In an RC car or similar electric model, the small footprint leaves more freedom when placing the electronics around the receiver, battery pack and motor. The neutral return in failsafe mode and the option to disable reverse give hobbyists clear control over how the model responds on the bench and out on the track.  Warning! Not suitable for children under 14 years.

Ball bearings

Tipper Truck 8x4 Ball Bearing Set, model spare

€58.99

Built for the Tipper Truck 8x4, this ball bearing set adds a focused mechanical upgrade to a model where many rotating points work under load. The set contains 34 shielded bearings, with 32 in one size and 2 smaller bearings for positions that need a different diameter within the chassis layout. Instead of plain sliding contact, each bearing uses rolling elements to support shafts and other moving parts with lower friction. That can help wheel hubs, transmission points and axle-mounted components turn with a cleaner mechanical feel during operation. The steel construction suits workshop fitting where precise seating matters, and the mixed size count allows the set to match more than one bearing location within the same vehicle. As a dedicated spare and tuning part, it fits naturally into maintenance work, rebuilds or a fresh model setup where the running gear is being equipped component by component. On the bench, the set supports systematic installation across the model's rotating assemblies rather than a one-point repair. In regular use, the bearing layout suits hobbyists who want the Tipper Truck 8x4 to run with more refined mechanical movement at the parts that matter most.

Ball bearings

Tow Truck 8x4 Ball Bearing Set, model accessory

€59.99

The Tow Truck 8x4 Ball Bearing Set brings a focused workshop upgrade to the mechanical core of the model with 36 compact metal bearings made for replacement, servicing, or a full running-gear refresh. The shielded radial design points to use in rotating assemblies where clean movement and precise seating matter during maintenance work. Within a model build, ball bearings sit at the points where motion is transferred through axles, wheel mounts, or gear-driven sections, and this set provides the quantity needed for a broader overhaul rather than a single swap. The uniform metal construction and consistent bearing format suit hobby benches where worn parts are exchanged methodically and matched components matter. As a dedicated set for the Tow Truck 8x4, it supports repair planning with a clearly defined component pack instead of mixed loose replacements. On the bench, the set fits routine servicing after long running sessions, a rebuild of an older model, or the careful preparation of a fresh mechanical setup. The 14 Years age marking is stated in the product data.

RC tuning parts

TT01 Upper Deck Carbon 2 mm, chassis upgrade

€25.99

The TT01 upper deck carbon 2 mm is a tuning part for the TAMIYA TT-01 chassis that adds a carbon upper structure to the model's layout while increasing chassis stability. Its long, slim deck format with mounting points at both ends and a central slotted section gives the conversion a technical, motorsport-style look that suits workshop builds and track-focused setups alike. As an upper deck, this part works as a structural link across the chassis and refines the TT-01 platform with a more focused reinforcement concept than the standard arrangement alone. The carbon construction brings a precise, purpose-built character to the assembly, while the included mounting material covers the hardware needed for fitting the deck in place. Screws and spacers are supplied for the installation, and the deck is suitable for all TT-01 chassis. The shaped plate design, elongated slots, and compact secondary link piece shown in the set point to a clean, model-specific fit rather than a generic brace. In a hobby bench setup, the upper deck becomes a clear next step for enthusiasts refining a TT-01 build for running sessions, rebuilds, or chassis updates. Age 14 Years. Batteries are not included.

RC truck accessories

Universal Light Module LBS15, RC module, 15 functions

€49.99

The Universal Light Module LBS15 adds programmable lighting control to RC models through 4 outputs rated at 500 mA each and a selectable output voltage setup. Terminals 1, 2, 3 and 4 work with a shared positive connection, creating a tidy basis for separate light circuits in body shells, scale trucks or other model builds where multiple effects need clear routing. DIP configuration allows the output to run either at UOUT=URC BEC or across 6.0-14 V, so the module can be matched to different onboard power layouts. The 3-wire servo connection uses orange for signal, red for positive and brown for negative, and the module connects directly to a free receiver channel. The housing markings show polarity and channel assignment at a glance, which helps when integrating the board into tighter chassis spaces. With 15 functions available, the module supports more than a single fixed pattern and gives lighting setups a broader operating range inside one compact control unit. In use, the module suits RC cars, trucks and other model applications that benefit from switched or effect-based lighting. It fits especially well into custom builds where separate front, rear or auxiliary light circuits need organised control through the receiver system.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Viper Auto Sport 20, speed controller, waterproof

€41.99

The Viper Auto Sport 20 speed controller brings waterproof electronic motor control to brushed RC model setups in a compact 40 x 35 x 12 mm format. With forward, reverse and brake functions, it gives the drivetrain clear throttle response while the 54 g weight with cable keeps the unit easy to place in tighter chassis layouts. Programming is handled through 1 setup button, so the controller can be configured without a complex menu structure. The stated 20 Turn motor limit defines its intended brushed motor range, and NiMH compatibility with 4 to 8 cells at 4.8 to 9.6 V covers common hobby configurations. An integrated fail safe is built in as a concrete control feature, and the electronics also include short-circuit protection, overload protection, an on off switch and complete wiring. The listed 3.3 k frequency and 1.5 A BEC output add further technical detail for model builders comparing drive components. In a touring car, buggy or other electric RC vehicle, the compact case and attached leads support tidy routing between battery, motor and receiver. Wet track sessions, club running and general hobby use all benefit from a controller that combines waterproof construction, direct setup and clearly stated electrical limits.

RC electric motors & controllers

Viper Truck Twin 27T/15T, speed controller

€62.99

The Viper Truck Twin 27T/15T speed controller brings compact brushed-motor control to electric RC models with a 40 x 35 x 12 mm housing and a weight of 53 g including cable. Its waterproof construction and integrated wiring suit installations where space is limited and the electronics need a clean, self-contained layout inside the chassis. The controller is designed for NiMH battery packs with 5 to 10 cells and an input range of 6 to 12 V. A 15 Turn motor limit defines the drive range for compatible brushed setups, while a 3.0 A BEC supports receiver power supply. The operating sequence covers forward, brake and reverse, and the reverse function can be switched off when a model is set up for running without it. Setup is handled through a single button on the ESC, keeping the programming process focused on the controller itself rather than a separate programming unit. In use, the Viper Truck Twin 27T/15T fits RC truck and car builds that need compact dimensions, direct setup access and clearly defined drive functions. Complete wiring and an on-off switch support straightforward integration into a model, whether the controller is being installed in a fresh build or replacing an existing ESC in an established chassis.  Warning! Not suitable for children under 14 years.

Li-ion batteries

WaveRacer Jet replacement battery, 7.4V Li-Ion

€19.99

The WaveRacer Jet replacement battery is built around a clear electrical specification: 7.4 V, 2000 mAh and Li-Ion cell chemistry. That combination gives model hobbyists a defined spare power pack for the named WaveRacer Jet setup, with the key figures stated plainly for matching and replacement. As a replacement battery rather than a general accessory bundle, its role is practical and specific. The 7.4 V rating identifies the voltage class, while the 2000 mAh capacity marks the pack's stored energy level for the intended application. Li-Ion chemistry adds another concrete point for hobbyists comparing battery types within an RC fleet or checking an existing setup before ordering a spare. The product data names the WaveRacer Jet directly, so the battery can be described as a dedicated replacement option for that model designation rather than a broad, undefined universal pack. In day-to-day hobby use, a spare battery like this supports quick replacement of an exhausted or ageing pack and helps keep a compatible power source on hand for the matching RC watercraft. It also serves as a clear-spec backup when an original battery needs to be exchanged after repeated running sessions. Batteries are not included.

RC servos

X-Crawlee PRO, servo, waterproof metal gear

€25.99

Built for wet sections and technical crawling lines, the X-Crawlee PRO servo combines waterproof construction with a metal gear train and 6 kg steering force in a regular-size format. The CS-6 unit is designed as a dedicated servo for the X-Crawlee PRO, giving RC model setups a compact control component that suits muddy ground, splash zones and mixed outdoor terrain. The housing carries a JR connection lead for integration with compatible RC electronics, while the included servo horns provide the mechanical link for steering or other control tasks. Rubber mounting grommets sit at the fixing points to help decouple vibration from the chassis, and the included mounting hardware supports a tidy fit during installation. The metal gear layout is a key match for applications where steering loads rise on rough surfaces, because the gear train transfers servo movement directly to the linkage with a solid mechanical feel. On rock sections, damp forest tracks or backyard crawler courses, the waterproof build keeps the servo focused on control rather than conditions. Combined with the regular-size format, the set fits naturally into hobby-grade RC builds that need a dedicated steering component for precise input under load.  Warning! Not suitable for children under 14 years.

RC brushless motors

1:10 BL Motor Dragster Turbo 2.0, RC motor

soon available again

The 1:10 BL Motor Dragster Turbo 2.0 2000KV is an electric RC motor created for model-building enthusiasts working on a focused dragster-style setup. Its 2000KV rating gives the drive system a clearly defined basis for matching motor characteristics to the intended vehicle configuration and running style. As a brushless motor, it belongs in hobby projects where drivetrain choice shapes how the model responds under power. The 1:10 format keeps the motor aligned with a widely used RC vehicle scale, making it relevant for replacement work, planned upgrades or a fresh build around compatible components. The designation Dragster Turbo 2.0 places the motor within a performance-oriented setup, while the electric vehicle category points to battery-powered RC use rather than fuel operation. Minimum age 14 Years is stated for this motor. Battery is not included. On the workbench, this motor suits projects where the drive package is selected component by component and the KV figure matters in the overall setup plan. It also fits rebuilds where an existing RC vehicle needs a fresh motor matched to the rest of the electronics.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:12 NemeSys, RC car, 2.4 GHz 100% RTR

soon available again

The 1:12 NemeSys brings compact dimensions, 4WD traction and a lively off-road setup into one ready-to-run RC car. At 334 mm long, 233 mm wide and 140 mm high, the chassis combines a manageable footprint with the stance needed for rough ground, while the 2.4 GHz radio control keeps handling interference-free during each run. A 7.4 V Li-Ion drive battery with 1300 mAh supplies the Type 390 motor, and the aluminium heat sink supports the drive system when the pace rises. The model reaches up to 35 km/h and weighs 1020 g, giving the suspension and tyre setup a planted feel over changing surfaces. Adjustable aluminium shock absorbers let the running gear respond to ruts, gravel and uneven tracks, and the treaded tyres add bite where smooth rubber would lose grip. Integrated LED lighting on the bumper and roof adds a clear visual reference when the light drops, and the wheelie function brings an extra burst of character under strong acceleration. Splash-proof components support running sessions on dusty paths and damp ground, extending the range of places where the NemeSys can be driven. Driving time reaches 30 minutes. The set includes the fully assembled model, a 2.4 GHz remote control, a drive battery, a USB charger and 3 transmitter batteries, so the first outing can start with the supplied running gear and radio equipment.  Warning! Not suitable for children under 14 years.

RC off-road vehicles

1:12 Sea Racer, RC crawler, 4WD 2.4G RTR

soon available again

The 1:12 Sea Racer brings crawler layout and water-going action into one compact RC model, with 4WD drive, a waterproof chassis and a profile shape that keeps it moving even when there is no ground under the wheels. At 350 mm long, 250 mm wide and 180 mm high, it cuts a striking line on rocky banks, muddy tracks and shallow stream crossings. Its chassis combines a solid axle design with separate drive shafts and long-travel suspension, giving the wheels the articulation needed to stay in contact over broken ground. A wheelbase of 240 mm supports stable progress through tight sections, while the compact format helps the model thread through narrower gaps than larger crawlers. Two motors provide the drive power, and the polycarbonate body adds a light, impact-tolerant shell for rollovers and rough outdoor use. With a weight of 1137 g, the model carries enough presence for planted running without losing its agile character. The included 2.4 GHz radio system suits solo sessions where clean control matters, whether the route leads over stones, along wet banks or across puddled terrain. The ready-to-run package comes with the remote control system, a 7.2 V NiMH drive battery, USB charger and 3 x AA transmitter batteries, so charging and heading out can start straight away. Age 8+

Models & trailers

1:14 3-Axle Box Trailer, model kit, moving floor

soon available again

The 1:14 3-Axle Box Trailer brings working transport detail into a model kit built around a functional moving-floor system. Rigid PVC strips form the floor, and together with the travelling bulkhead they support near-complete unloading, creating a convincing handling sequence for bulk loads and transport scenes. Its frame uses laser-cut steel in 3 mm and 1 mm sections, giving the 1030 x 195 x 295 mm trailer a substantial structure with a total weight of 9600 g. The side and interior panels use a bolted sandwich construction, while the axle setup has been structurally revised and can be raised by +8 mm with the included suspension option. Ball-bearing wheel sets with wide chrome rims and wide tyres shape the running gear, and semi-circular fenders with splash guards complete the profile. Manually adjustable aluminum support legs, an operating platform, metal ladders, and grab handles extend the workshop-style detailing across the chassis. At the rear, sturdy locking bars secure the door, and aluminum hinges allow a 270° opening angle for loading access. A roll-up PVC tarpaulin covers the load area during transport, while a steel spare wheel holder with spare wheel, steel underrun protection on both sides, and a rear bumper with 7-chamber lights add further equipment. 14+ is the recommended age. Three linear motors are required for operation.

RC cars

1:14 Lamborghini Sián, RC car, 2.4GHz RTR

soon available again

Few modern supercars are as visually striking as the Lamborghini Sián, and this 1:14 RC car captures that low, angular silhouette in a compact format built for active running. The officially licensed body pairs the look of the original with 2.4 GHz control, so the model carries strong display character while staying focused on precise driving. The ABS body is shaped with opening doors and a hinged hood, adding mechanical detail that can be explored when the car is off the move. A faithfully reproduced interior gives the cabin more depth at close range, making the 360 mm long model feel considered from outside and within. Front and rear LED lights sharpen the appearance in changing light conditions and keep the contours readable during evening sessions. Under the body, the differential gearbox manages power through corners, while the full suspension helps the chassis stay composed as the surface changes from smooth paving to rougher ground. With dimensions of 360 x 160 x 80 mm and a weight of 677 g, the model combines a substantial road presence with manageable handling. The fully assembled RTR set includes the 2.4 GHz remote control unit, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 3 LR06 batteries, so driving can start without a separate setup phase. A ride time of up to 25 minutes gives each session enough length for repeated laps, careful cornering practice or relaxed cruising across open indoor and outdoor spaces.

RC chassis & attachments

1:14 LED Board Side Volvo FH16, model accessory

soon available again

The Volvo FH16 is one of the defining names in modern long-haul truck design, and this 1:14 LED Board Side brings that road-truck character into a scale model build through a dedicated lighting accessory. As a model supply rather than a complete vehicle, it focuses on one specific visual area of the truck and adds a more defined illuminated presence to the side section. The product data identifies this part as a 1:14 LED Board Side Volvo FH16 2A, placing it in the models and accessories range and specifically in model supplies. That makes it a fitting choice for hobby projects built around scale truck detailing, where separate lighting components help shape the final appearance. The 2A designation is part of the stated name and helps distinguish this version within the range. Batteries are not included. The age marking is 14 Years. In a workshop setting, this accessory supports focused upgrade work on a Volvo FH16 scale truck, especially where lighting details are part of the planned finish. On a display shelf or during model operation, an LED side element can strengthen the visual definition of the body layout while keeping the build aligned with the stated 1:14 scale.

RC truck accessories

1:14 Scania 770S Taillight PCB, model accessory

soon available again

The Scania 770S stands out in modern truck design with its broad, sculpted rear bodywork, and this 1:14 taillight PCB brings that character into a model build with a dedicated lighting component for the TAMIYA Scania 770S. Original reproduced chamber taillights with glass inserts give the rear section a more defined scale appearance while the PCB format supports integration into a working truck project. The set is built around a specified input voltage range of 7.2 to 12 V DC, which gives model-building enthusiasts a clear electrical basis when planning the lighting system. The image material shows matched left and right assemblies with wiring, shaped housings and mounting points, indicating a layout intended for installation on the corresponding rear sections of the truck. This makes the taillight PCB a focused upgrade or replacement part for builders refining the rear end of a 1:14 road truck model rather than a generic lighting board. In a workshop setup, the component suits detailed Scania 770S projects where the rear lighting needs to match the body lines and scale look of the truck. Compatibility is clearly defined: the taillight PCB fits the TAMIYA Scania 770S and is not compatible with TAMIYA MFC-01 or MFC-03 units, which helps keep parts selection aligned with the planned electronics.

RC truck accessories

1:14 Steel Drive Shaft 55-67 mm, model part

soon available again

This 1:14 steel drive shaft is a focused drivetrain part for model-building enthusiasts working on compatible vehicle setups. With a stated length range of 55-67 mm, it covers a clearly defined fit window for installations that call for this span between connected drivetrain points. As a models supply component, the shaft belongs in repair, maintenance and parts replacement work where the original drivetrain hardware needs a matching steel spare. The 1:14 designation places it within scale-specific model applications rather than as a general workshop part. Steel construction keeps the material statement precise and relevant for a component that sits within the drive system. The 55-67 mm format gives a concrete reference for checking fit against an existing assembly before installation. Age marking: 14 Years. On the hobby bench, this part suits rebuilds after wear, planned drivetrain servicing or a fresh parts stock for compatible 1:14 models. In running fleets that stay active over repeated sessions, a correctly sized replacement shaft helps keep maintenance work targeted and scale-specific.

RC truck accessories

1:14 Steel Drive Shaft 60-80 mm, model part

soon available again

This 1:14 steel drive shaft is a focused drivetrain part for model builds and maintenance work where a shaft length of 60-80 mm is required. The steel construction and clearly stated size range give hobby work a concrete starting point when matching a replacement or planning a compatible transmission layout. As a models supply component, the shaft belongs in the mechanical link between connected drivetrain assemblies rather than in decorative bodywork or electronics. The 60-80 mm specification is the central technical detail here, because it defines the installation span this part is intended to cover. In workshop use, that measurement helps narrow down compatibility within 1:14 projects and keeps the selection tied to a real fit requirement instead of a generic spare-parts search. The part is listed for ages 14 Years and up. It suits bench repairs, planned parts replacement, and fresh 1:14 model setups where the drivetrain calls for this exact component type and length range. For hobbyists sorting parts for a running chassis or a mechanical rebuild, the steel drive shaft adds a precise, searchable spare to the workshop stock.

RC truck accessories

1:14 Steel Drive Shaft 70-90 mm, model part

soon available again

This 1:14 steel drive shaft is made for scale model driveline setups that need a defined fit range rather than a one-length-only replacement. With an adjustable span from 70 mm to 90 mm, it covers a clear installation window for compatible chassis layouts and transmission positions. As a dedicated model part, the shaft focuses on one of the key mechanical links in the drivetrain. The steel construction places the emphasis on a concrete component that connects rotating parts within the driveline, while the adjustable length helps accommodate different spacing requirements in 1:14 applications. That makes it useful for repair work, part replacement, or a measured update within an existing build where the installed shaft length must match the layout precisely. In workshop use, the 70-90 mm range gives model-building enthusiasts a straightforward reference when checking compatibility against the required installed length. For scale truck and vehicle projects in 1:14 format, it adds a clearly specified driveline component to the parts selection without relying on guesswork.

RC truck accessories

1:14 Steel Drive Shaft, model part, 45-50 mm

soon available again

This 1:14 steel drive shaft is a dedicated transmission part for model-building enthusiasts working on compatible vehicle setups. The adjustable 45-50 mm length gives the shaft a defined working range for installations where the distance between connected drivetrain points falls within those measurements. As a steel component, it belongs in the mechanical heart of the model, linking rotating parts in the driveline rather than serving as a cosmetic add-on. That makes it relevant for repair benches, spare-parts storage, and planned rebuilds where an existing shaft needs replacement with the same size range. The 1:14 designation places it in the scale context used for matching parts to the rest of a build. With only the shaft named in the data, the focus stays on the core specification: steel construction and a 45-50 mm format. In workshop use, this kind of part suits maintenance sessions where worn transmission hardware is exchanged for a fresh component, or build projects where the measured installation gap determines the required shaft length. It also fits hobby setups that keep scale-specific spares ready for ongoing servicing.

RC truck accessories

1:14 Steel Drive Shaft, model part, 65-85 mm

soon available again

Built for 1:14 model applications, this steel drive shaft covers an adjustable length range of 65 to 85 mm and serves as a focused drivetrain component for compatible builds. The metal construction and defined span make it a practical choice when a model layout calls for this specific connection length between drivetrain elements. As a model supply part in the Models & Accessories range, it suits workshop use where an existing shaft needs replacement or a build requires a matching transmission link. The 65-85 mm adjustment range gives flexibility within that fit window, while the steel design keeps the part aligned with hobby setups that use dedicated metal drivetrain hardware. The age marking is 14 Years. In a build bench setting, this component fits naturally into maintenance, repair, or project completion work on compatible 1:14 models. It also supports parts selection where the required shaft length must be matched clearly to the drivetrain layout before installation.

RC buggys

1:16 Tenzu, RC car, 4WD 100% RTR

soon available again

The 1:16 Tenzu brings compact off-road running together with 4WD traction and fully proportional control in a 300 mm format built for fast, precise inputs. Front and rear LED lighting adds a clear visual signature while the chassis works across rough ground, loose sections and mixed surfaces. A 390 brushed motor pushes the model to up to 30 km/h, giving the lightweight 825 g layout the pace to feel lively without losing control. Ball bearings support efficient drivetrain operation, and the 2-channel 2.4 GHz radio system reaches up to 75 m for stable command during wider runs. The 110 mm height keeps the body low over the suspension, while the double wishbone layout helps the wheels track uneven terrain with controlled movement. The coarse-tread off-road tires are matched to outdoor running where grip changes from patch to patch. As a 100% RTR model, the set includes the 2.4 GHz remote control system, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA batteries. The age marking is 14 years and up. Open ground, gravel paths and compact dirt sections suit the Tenzu especially well, where its proportional control, 4WD layout and illuminated bodywork come into their own during evening laps.  Warning! Not suitable for children under 14 years.

Mini RC cars

1:50 Nano City Fire Truck, RC car, 2.4 GHz

soon available again

Fire engines with access platforms bring a distinct presence to any city scene, and this 1:50 Nano City Fire Truck translates that character into a compact RC format. The 135 mm vehicle combines radio-controlled driving with a manually operated crane tower, creating movement on the ground and a second action point above the chassis. The ready-to-run model comes with a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery and a USB charger, so the core driving setup is already matched to the vehicle. At 60 mm wide, 92 mm high and 146 g in weight, the fire truck stays compact enough for desks, floors and small obstacle layouts while still carrying a clearly defined body shape. LED lighting sharpens the emergency-vehicle look in motion, and the detailed driver's cab adds another layer of scale character. The crane tower can be rotated manually through 360°, while the outriggers can be adjusted by hand in both height and length to change the support position for each setup. That mix of RC driving and manual functions suits short rescue-style routes, tabletop layouts and compact city scenes where turning, positioning and staging all matter. With a runtime of up to 40 minutes, the model has the endurance for repeated driving rounds before returning to the USB charger.

Mini RC cars

1:60 Nano Racer Breaker, RC car, 2.4 GHz

soon available again

The 1:60 Nano Racer Breaker brings compact RC driving into a small-format racer with 2.4 GHz radio control, a 30 m range and up to 20 minutes of driving time per charge. Its green body, black racing stripes, rear spoiler and printed race graphics give the model a clear track-inspired look that stands out on desks, tables and floor layouts. The included 1.2 V 80 mAh NiMH drive battery powers a fast, manoeuvrable setup built for quick steering inputs and short sprints through tight turns. Charging takes place via the remote control, so the car and controller work as one compact driving system with fewer separate parts to manage between runs. The radio system supports operation of up to 50 vehicles at the same time, which suits shared sessions where several racers are on the course together. The ready-to-run format keeps the focus on driving, with the fully assembled model and matching controller supplied in the set. On a tabletop circuit, in a hallway slalom or across a printed race mat, the Nano Racer Breaker fits quick RC sessions into small spaces without losing the feel of active steering control. Age 8+ is stated in the product data, and the compact format makes the model easy to bring out for short indoor races whenever a track is ready.

Mini RC cars

1:60 Nano Racer Breaker, RC car, 2.4 GHz

soon available again

The 1:60 Nano Racer Breaker brings compact RC action to desks, tables and small indoor tracks with a fully assembled race car, a 2.4 GHz remote control system and a rechargeable 1.2 V 80 mAh NiMH drive battery. Its orange body, black stripes, rear spoiler and printed Race Breaker markings create a clear motorsport look while the small scale keeps the handling tight and lively in limited space. The control setup is built for quick sessions: the vehicle charges via the remote control, so the charging connection stays close at hand between runs. A driving time of 20 minutes gives enough time for repeated laps, short duels and steering practice, while the 30 m range leaves room for movement beyond a single tabletop stretch. The interference-free 2.4 GHz system also supports running up to 50 vehicles at the same time, which suits group racing without signal overlap. Direction changes, short sprints and close cornering all benefit from the fast, manoeuvrable setup named in the technical data. On a printed race mat, across a wooden floor section or around improvised obstacles indoors, the Nano Racer Breaker turns small spaces into a compact circuit. Included in the set are the ready-to-run model, the remote control with charging connection, the NiMH drive battery and instructions.

Mini RC cars

1:60 Nano Racer Striker, RC car, 2.4 GHz

soon available again

The 1:60 Nano Racer Striker brings compact RC action to desks, tables and floor tracks with a fully assembled racing car, a 2.4 GHz remote control and a sharp yellow body with black graphics. Its small format and quick reactions create a lively driving scene in tight spaces, whether the course runs around books, across a tabletop or through marked-out corners on the floor. The included remote control uses an interference-free 2.4 GHz system and reaches up to 30 m, giving the car room for short sprints, turns and side-by-side runs. A rechargeable 1.2 V 80 mAh NiMH drive battery powers the model for up to 20 minutes, and the charging plug on the remote control keeps the charging process directly tied to the set. The sporty shell features STRIKER markings, dark window graphics, black wheels and a rear spoiler that underline the racing look. With up to 50 vehicles able to run at the same time, the format also suits group racing where several cars share the same layout. Age 8+ marks the recommended age. On a printed track mat, a wooden tabletop or a smooth section of floor, the Nano Racer Striker turns small spaces into a compact race circuit with quick steering inputs and rapid direction changes. Included are the ready-to-run model, 2.4 GHz remote control, rechargeable drive battery and instructions.

RC cars

1:64 Flixbus, RC bus, 2.4 GHz RTR model

soon available again

The familiar long-distance coach appears here as a compact 1:64 RC bus with official Flix SE license, combining the recognisable Flixbus livery with full driving functions and a route-ready RTR setup. At 171 mm long, 40 mm wide and 55 mm high, the model carries the proportions of a modern coach into a format that suits desks, floors and compact driving spaces. A 3.7 V 500 mAh Li-Ion drive battery powers running sessions of up to 80 minutes, and the included USB charger keeps the turnaround straightforward between outings. Radio control runs on 2.4 GHz with a range of up to 25 m, giving the bus clear command response without interference from nearby models on the same frequency band. The detailed bodywork is paired with bright green printing, dark window areas and roof detailing that strengthen the road-going coach character beyond a simple toy-like finish. The compact wheel layout and low weight of 257 g make the model easy to guide through short straights, gentle curves and tighter indoor manoeuvres. Whether used for first RC sessions from age 4 years or for a fleet with buses, trucks and city traffic scenes, this Flixbus brings a recognisable transport theme into radio-controlled driving with a distinct licensed look.

RC models in 1:87 scale

1:87 VW Beetle Rallye, RC car, 2.4G RTR

soon available again

The VW Beetle became one of the most recognisable shapes in automotive history, and its rally styling gives that familiar silhouette a more purposeful edge. In this 1:87 RC car, the compact format, detailed decoration and front and rear LED lights bring that motorsport character into a fully ready-to-run model. The set includes the assembled vehicle, a 2.4 GHz remote control system, a 3.7 V Li-Ion drive battery with 40 mAh and 4 LR03 AAA transmitter batteries. Fully proportional control allows measured steering and throttle inputs instead of simple on off commands, which suits the small 1:87 scale especially well. Steering trim helps align straight running when fine corrections are needed on the course. The very small turning radius supports tighter manoeuvres around table layouts, smooth direction changes and controlled driving in limited space. A storage display case is also included, giving the model a clean place between driving sessions. With 1 player operation and a ready assembled format, the model moves quickly from shelf to track. Short indoor routes, desk side layouts and compact display scenes all suit the small scale, while the transmitter charging function returns the car to running condition in 45 minutes for the next session.

LiPo batteries

3,7V/300mAh Lipo Akku: 500505038

soon available again

RC brushed motors

550 Brushed Motor, XS-Chassis spare motor

soon available again

The 550 brushed motor brings a direct replacement drive unit to the Carson XS-Chassis 1:10 range, with a can-style DC layout, output shaft and top electrical terminals that suit classic hobby vehicle drivetrain setups. Built as a cable-free spare motor, it leaves the connection points open for the required installation work on the matching chassis. Compatibility is stated for Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. That covers Stadium Fighter in blue and orange, Offroad Fighter Cage in turquoise and red, Tekuro in grey green and grey blue, plus Ryken in blue and green. The 550 size makes this motor a defined replacement choice when an existing drive unit needs to be exchanged within that platform. The brushed setup also suits hobbyists who prefer straightforward maintenance on established RC vehicle systems. In workshop use, this spare motor fits naturally into repair, refresh and running maintenance on compatible 1:10 Carson vehicles. It supports drivetrain restoration after wear, or a like-for-like motor swap when one of the listed XS-Chassis models needs a fresh drive unit.  Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Akuma Shock Tower Set, RC spare part, 2 pcs

soon available again

The Akuma platform relies on accurately mounted suspension hardware, and this shock tower set brings together the front and rear parts needed for that job in one 2-piece spare set. Shaped for the Akuma model line, the set focuses on a core chassis area where mounting geometry and clean fit matter during repair or rebuild work. The included parts cover front and rear shock tower positions rather than only one end of the vehicle, which helps keep replacement planning straightforward when both mounting areas need attention. Product imagery shows black moulded support parts with ribbed sections and multiple fixing points, paired with silver mounting plates with drilled holes and cut-outs. That combination points to a layout built around direct fastening and alignment with the surrounding chassis hardware. As a dedicated spare part rather than a general accessory, the set is aimed at maintaining the original structure of the model. On the workbench, this kind of component set fits naturally into routine maintenance after heavy running, collision damage or a full strip-down of the chassis. The 14 Years marking places it in the hobby segment, where model builders often keep key replacement parts ready for service intervals and rebuild sessions.  Warning! Not suitable for children under 14 years.

Wishbones

Akuma Tie-Rods Kit, RC spare part, 4 pcs

soon available again

The Akuma tie-rods kit supplies 4 replacement parts for front and rear linkage work on compatible RC vehicle setups. As a dedicated spare part set, it gives model-building enthusiasts the core pieces needed when worn linkage components need to be exchanged and the chassis brought back into running condition. The set is identified in the data as a front and rear tie-rods kit and is intended for Akuma models. That makes it a focused choice for maintenance, repair, or parts stock in an RC workshop rather than a general accessory with unclear fit. The included 4-piece format suits jobs where several connection points need attention at once, reducing the need to source individual rods separately. The product image shows black moulded linkage components with mounting holes and small metal posts, indicating a mechanical connection role within the steering or suspension layout. Such parts are central wherever wheel guidance and chassis articulation depend on clean, correctly aligned link points. In practice, this kind of spare set fits naturally into routine rebuilds after heavy running sessions, collision damage, or scheduled chassis servicing. It also works well as a shelf-ready replacement set for hobby benches where compatible Akuma parts are kept available for fast turnaround between repair and the next drive.  Warning! Not suitable for children under 14 years.

RC cars

Carson Magic Machine Bundle

soon available again

Product bundle consisting of: 1:10 MyFirst Mag.Mach.2.4G 100% RTR blue / 4,8V/600mAh NiMH Batt. 500404201/02 JST Article number: 500404230 Product: 1:10 MyFirst Mag.Mach.2.4G 100% RTR blue It’s magic – Just one push of a button, and the ultra-flat racer turns into a fully-fledged four-wheel drive all-terrain vehicle. Almost anything is possible with the "My 1st Magic Machine" from CARSON RC-Sport. The racing car can zip over the Asphalt in race mode and overcome obstacles with a backflip, i.e. the vehicle flips backwards and carries on going on its back. The top and button have different designs, meaning that you are controlling a different-looking vehicle with your 2.4 GHz remote control in an instant. If the terrain then becomes too rough, you can push a button on the Transmitter and revert back to the first position with a backflip, converting your Magic Machine into all-terrain off-road mode with a considerable amount of ground clearance. The large rubber tyres with extremely grippy tread give your Magic Machine sufficient grip on any surface. A Special mechanism steers the front and rear units of your Machine separately, meaning that both axles of the racing car are steered simultaneously. The Magic Machine is rounded off by the 100% scope of delivery consisting of the battery pack, the charger, the transmitter batteries and instructions. Have fun with your Magic Machine from CARSON-RC Sport. Buy, charge and drive! Optional Accessories: N° 500608219, NiMH spare battery 4.8 V / 600 mAh

RC servos

CS-10DS Low-Profile Servo, RC servo, waterproof

available from December

The CS-10DS Low-Profile servo brings a flat 25 mm overall height together with quick steering response, making it a strong fit for RC chassis where installation space is tight and steering inputs need to register fast. In touring cars, drift models and buggies, the compact 40.5 x 20.5 x 25 mm format sits neatly into layouts that leave little room for a taller unit. At 6V, the servo delivers 9.53 kg.cm and moves through 60° in 0.09 sec, combining steering force with sharp reaction speed in one compact assembly. A coreless motor drives the action, while the metal gearbox passes that output on through a more direct mechanical path than a basic gear train. The 2 ball bearings support the shaft under repeated steering movement, and the 25-tooth output gearing gives a defined mounting point for compatible servo arms. The housing is waterproof, which broadens the range of running conditions when a model heads onto damp tarmac, dusty car parks or mixed outdoor surfaces. Weight stays at 44.3 g, helping this servo suit builds where component dimensions and mass both matter. A servo horn set is included for installation. The JR connection supports integration into many RC model layouts, making the CS-10DS a focused upgrade for steering systems that need speed, torque and a low-profile form.

RC servos

CS-15DS Low-Profile Servo, RC servo, waterproof

available from December

The CS-15DS Low-Profile servo brings compact dimensions, high steering speed and strong output into one RC upgrade for 14 Years and up. With a housing size of 40.5 x 20.5 x 27.5 mm and a weight of 52 g, this low-profile unit suits chassis layouts where installation height matters but steering performance still needs to stay sharp. Inside the case, a coreless motor drives a positioning time of 0.07 sec per 60° at 8.4 V, giving fast reaction to steering commands during touring, drift or buggy running. The output reaches 15.6 kg.cm at 8.4 V, and the metal gearbox is built to transmit that force with controlled, accurate movement. Two ball bearings support the drivetrain and contribute to steady servo action through repeated direction changes. The JR plug-in system supports straightforward integration into compatible RC setups, and the included servo horn set provides the mounting hardware needed for installation. The waterproof construction keeps the servo ready for sessions in rain or on damp ground where exposed electronics face harsher conditions. In flat on-road chassis, drift builds or modern buggy platforms, the low 27.5 mm overall height opens up space-sensitive installations without giving away the speed and torque needed for precise steering input.

RC servos

CS-16DS Low-Profile Servo, RC servo, waterproof

available from December

The CS-16DS low-profile servo brings compact dimensions and fast control to RC installations where every millimetre matters. With a housing size of 40.5 x 20.5 x 28 mm and a weight of 47 g, it suits flat chassis layouts that need a shorter servo height without giving away steering performance. Its operating range of 6 to 8.4 V gives flexibility across common RC electronics setups, while the waterproof housing supports running in wet conditions where splashes and damp surfaces are part of the session. The 2 ball bearings support the output shaft through repeated steering movement, and the 25-tooth output gearing provides a defined interface for compatible servo hardware. A servo horn set is included, and the JR plug system supports straightforward connection in many RC model layouts. In touring cars, drift cars and other compact RC builds, the low-profile format leaves more room around the chassis top deck and steering assembly. The combination of 15.6 kg.cm torque at 8.4 V, 0.09 sec per 60° speed and a metal gearbox suits quick direction changes, tight line corrections and controlled input through technical sections.

RC servos

CS-20DS Standard Size Servo, RC servo, waterproof

available from December

The CS-20DS standard size servo brings fast actuation and high control force to RC models that need a serious steering or throttle component. With a voltage range of 6 to 8.4 V, 25 kg/cm torque at 8.4 V and a transit speed of 0.10 sec per 60°, it suits builds where quick response and firm holding power matter on the track or over rough ground. Its internal layout combines a core motor with a metal gear train and 2 ball bearings, a setup aimed at accurate movement under repeated load. The housing measures 40.5 x 20.2 x 38 mm and weighs 62 g, making the servo a regular-size format that fits many common RC installations without oversized packaging around the mechanism. The 25-tooth output gearing provides a defined interface for linkage setup, and the included servo horn set supports installation work straight into the model. Waterproof construction expands the range of running conditions to wet surfaces and rainy sessions where exposed electronics need added protection. In off-road chassis, touring cars and upgrade projects, the CS-20DS can take on steering duties where fast centring and strong torque shape the handling feel. It also suits kit-based model builds that call for a standard size servo with JR connection and clearly stated electrical and mechanical data.

RC servos

CS-46DS Servo, RC servo, standard size, waterproof

available from December

The CS-46DS brings high steering force into a standard size servo format, combining 46.9 kg.cm actuating torque at 7.4 V with a coreless motor for strong, immediate control in demanding RC builds. Its black, blue and silver housing adds a technical look that suits off-road trucks, crawlers and other heavy-duty model setups. Inside the 40.5 x 20.5 x 36 mm case, a metal gearbox and 2 ball bearings support the drive train where steering loads rise under grip, weight transfer and uneven terrain. The 73 g servo format gives builders a clear reference for chassis layout and linkage geometry when planning an upgrade or a fresh installation. The JR plug system supports straightforward connection in compatible RC electronics layouts, and the included servo horn set adds the hardware needed for fitting the servo into the steering assembly. Minimum age: 14 years. In use, the CS-46DS suits models that need firm steering authority when tyres bite into loose ground, climb over obstacles or track through wet sections. Waterproof construction keeps the servo ready for runs in mud, water or snow, where stable steering input matters as much as raw force.

RC servos

CS-46DS-BL servo, RC servo, standard size

available from December

The CS-46DS-BL brings brushless servo power into RC setups that need strong steering authority and fast response. With 47.8 kg.cm torque at 7.4 V, a metal gearbox and a 0.10 sec per 60° transit time, this standard-size servo is built for demanding model applications where control has to stay direct under load. Its 40.5 x 20.5 x 36 mm format follows the common RC standard size, making the servo a practical choice for many existing chassis layouts that use the JR plug system. The brushless motor is paired with 2 ball bearings to support smooth output shaft movement, while the waterproof construction keeps the servo usable when the route includes rain, puddles or mud. At 71 g, the unit combines substantial drive strength with dimensions that fit established installation spaces in many RC vehicles. The specification suits heavy 1:8 off-road trucks, large crawlers and competition-focused builds where steering precision matters on rough ground and during quick corrections. A servo horn set is supplied for installation. For operation, a compatible RC model and power setup are required separately.

RC servos

CS-6DS Standard Servo, RC accessory, waterproof

available from December

The CS-6DS standard-size servo brings compact control hardware to RC model setups with a waterproof housing, metal gears and a core motor in a 40.5 x 20.2 x 40.3 mm format. At 6 V it delivers 7.5 kg/cm torque and a transit speed of 0.11 sec per 60°, giving steering and other control functions clearly stated performance data for hobby builds. Its 55 g weight helps place the unit precisely within the chassis layout, while 2 ball bearings support smooth shaft movement under repeated input changes. The 25-tooth output gearing defines the spline format for matching linkage hardware, and the JR connection identifies the plug standard for compatible radio installations. A servo horn set is included, so the essential mounting interface is already part of the contents. The voltage range of 4.8 to 6 V gives the servo a clear operating window for common RC electronics. In a touring car, buggy, crawler or boat conversion, the CS-6DS suits builds that need a standard-format servo with stated torque, speed and connection details before installation begins. The waterproof design also makes it a practical choice for model applications where moisture resistance matters alongside precise control response.

Catalogues & merchandise

Paper Bag 22 x 10 x 36 cm Carrier Bag

soon available again

This paper carrier bag combines a brown kraft paper finish, integrated flat paper handles and a compact 22 x 10 x 36 cm format in a straightforward branded design. The front carries the CARSON logo print, giving the bag a clear visual identity for retail handover, merchandise presentation or event use. The rectangular shape supports upright filling at the counter, while the narrow 10 cm depth keeps the format compact for smaller contents. Flat paper handles sit close to the bag body and provide a simple hand-carrying option for lightweight purchases or promotional materials. The natural kraft look keeps the appearance clean and functional, with the printed front adding a distinct brand presence without changing the plain, practical structure of the bag. In shop settings, the bag works as a tidy take-away format for compact goods and accessories. It also suits gift presentation, trade fair handouts or branded event distribution where a small paper bag with handles and logo print fits the occasion.

RC servos

Servo CS-15DS, digital RC servo, standard size

available from December

The CS-15DS brings digital servo control, 15.32 kg/cm actuating torque at 6V and a standard-size 40.5 x 20.2 x 38 mm format into one compact RC component for precise chassis setup. In 1:10 and 1:8 models, that combination suits steering systems that need a strong, fast servo with a clearly defined installation size. Its 4.8-6V voltage range gives flexibility across common RC electronics layouts, while the core motor and 2 ball bearings support controlled movement through repeated steering inputs. The 25-tooth output gearing provides a defined interface for matching servo hardware, and the 62 g weight adds another concrete planning point when balancing the vehicle layout. The black-blue housing keeps the look technical and clean inside the chassis. With age marking 14 Years, the servo sits in the hobby-focused end of the RC range. Waterproof construction makes the servo suitable for running sessions where wet ground, spray or puddles are part of the route. In off-road builds, touring cars or other RC conversions that use a standard-size servo bay, the CS-15DS fits as a focused upgrade or replacement component for direct control input.

RC servos

Servo CS-30DS, RC servo, standard size waterproof

available from December

The CS-30DS brings high steering force into a standard-size servo format, combining 34.6 kg.cm at 8.4 V with a fast 0.13 sec per 60° transit speed for RC models that need both authority and direct response. Its 40.5 x 20.2 x 40.3 mm housing and 62 g weight fit the familiar standard servo class used across many hobby platforms. Inside, a core motor drives a metal gearbox built for high-load operation, and 2 ball bearings support the drivetrain for controlled, low-friction movement. The 25-tooth output gearing provides a defined interface for servo arms and steering linkages, making the unit a strong match for demanding steering tasks rather than light-duty trim functions. Waterproof construction expands the range of running conditions where the servo can stay in service, from damp tracks to off-road terrain with spray and mud. The included servo horn set adds the mounting hardware needed for setup with JR-compatible systems. In a crawler, monster truck or larger off-road chassis, the CS-30DS suits steering assemblies that place real load on the servo saver and linkage. 14 Years marks the recommended age. For hobby work, the combination of standard dimensions, strong torque and quick transit speed makes it a focused upgrade for models that need firmer steering authority.

RC servos

Servo CS-3DS, standard servo, waterproof

available from December

The Servo CS-3DS brings standard-size dimensions, JR connection and waterproof construction into one control component for RC model builds that need a compact, clearly specified servo. With a voltage range of 4.8-6 V, it suits common receiver power setups while keeping the installation focused on a familiar standard format. Its core motor is paired with plastic gears and a 25-tooth output gearing, giving the linkage a defined interface for compatible servo horns and steering assemblies. The listed performance figures of 5.6 kg/cm torque at 6 V and 0.12 sec per 60° at 6 V place the emphasis on quick, controlled movement rather than vague performance claims. Ball bearings are not fitted, and the specification states this plainly for builders comparing component layouts and running requirements. A servo horn set is included, so the control arm hardware is already part of the package. In a touring car, buggy, crawler or boat project, the 40.5 x 20.2 x 37.15 mm housing and 45.5 g weight give concrete reference points for installation planning before the linkage is connected. The waterproof design also suits running sessions where spray, puddles or damp ground are part of the conditions rather than an exception.

RC servos

Servo CS-40DS-BL, RC servo, standard size

available from December

The CS-40DS-BL brings brushless drive, 30 kg.cm actuating torque at 7.4 V and a 0.09 sec per 60° response into one RC servo built for precise control under load. Its black-blue housing, standard JR format and waterproof construction suit demanding running conditions where steering accuracy needs to stay sharp through mud, puddles and rain. Inside, the brushless motor works with a metal gearbox to convert control inputs into strong, direct servo movement. The 2 ball bearings support the output shaft for smoother operation when the linkage is under pressure. With dimensions of 40 x 20 x 29.95 mm and a weight of 66 g, the servo stays within a familiar standard-size format that fits many RC installations. The designation JR/MG/WP/0.11 also points clearly to its standard connection format, metal gear layout and waterproof build. The specification suits RC applications that call for strong steering force and quick correction, including heavier off-road models, crawlers and large trucks where the servo works hard through uneven terrain. In workshop upgrades as well as fresh builds, the CS-40DS-BL adds a focused combination of speed, torque and compact installation dimensions for 14 Years and up.

RC servos

Servo CS-6DS, RC servo, standard size, waterproof

available from December

The CS-6DS brings standard-size servo format, waterproof construction and digital RC control into a compact unit for model setups that need quick, defined movement. With dimensions of 40.5 x 20.2 x 37.15 mm and a weight of 48.5 g, it fits the familiar regular-size class used across many RC applications. Its operating range covers 4.8 to 6 V, giving flexibility for common receiver power systems. At 6 V, the servo reaches 0.12 sec per 60° and 7.0 kg/cm actuating torque, pairing brisk travel with the force needed for linked control tasks. A core motor forms the drive basis, while the plastic gearbox transfers movement through 25-tooth output gearing. The JR connection supports straightforward integration where this plug standard is required. The set also includes a servo horn set for installation. In an RC car, boat or other model using a standard servo bay, the CS-6DS suits roles where clean command transfer and compact dimensions count. Waterproof construction supports use in conditions where moisture is part of the running environment, while the regular-size layout keeps planning around mounting space simple.

RC servos

Servo CS-9DS, RC servo, standard size digital

available from December

The Servo CS-9DS brings digital control, standard-size dimensions and water-protected construction into one compact RC component for 14+ model-building projects. With a 40.5 x 20.2 x 38 mm housing and a weight of 55.6 g, it suits builds that need a clearly specified servo format without adding unnecessary bulk. At 6 V, the unit reaches 9.3 kg/cm actuating torque and a speed of 0.13 sec per 60°, combining firm movement with fast response for steering and other control tasks. The internal layout uses a metal gearbox, a core motor and 2 ball bearings, giving the mechanism a concrete technical basis rather than relying on a simple gear train alone. The 25-tooth output gearing also matters during setup, because it defines compatibility with the servo horn connection used in the linkage. In an RC car, boat or other model that accepts a standard-size servo, these figures support direct, controlled input when the radio command changes direction or position. The water-protected design adds flexibility for running conditions where splashes or wet surfaces are part of the session, while the compact footprint keeps the servo easy to place within a tightly planned chassis layout.

Additional spares

VIRUS 4.0 EP/GP Chassis Brace Set

soon available again

The VIRUS 4.0 EP/GP Chassis Brace Set brings the front and rear brace layout back into the model with matching replacement parts shaped for the VIRUS platform. The dark grey metal arms use a long, narrow form with recessed oval cutouts, creating a technical, machined appearance that suits the character of an RC chassis. Each brace features bent ends with rolled mounting eyelets, the points where pins or screws attach the parts into the vehicle structure. That construction matters during maintenance because a brace does more than fill space: it links defined mounting positions within the chassis and restores the intended connection between those points. As a spare part set for Virus/Akuma models, it fits naturally into repair work after wear, impact, or a rebuild that calls for fresh structural hardware. On the bench, this set suits focused servicing of a 14 Years+ RC model where the goal is a clean replacement rather than improvised adaptation. It also works well when an existing VIRUS 4.0 EP/GP build is being refreshed with the correct brace components for front and rear positions.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 BigWheel-Set 02, wheel set, on-road

soon available again

The 1:10 BigWheel-Set 02 brings a bold on-road wheel package to RC car builds, combining 10-spoke rims in black and chrome with low-profile tyres for a sharp tuning look. The 4-piece set gives 1:10 models a matched wheel layout that changes the stance and visual character in one swap. Each wheel arrives as a mounted unit, so the set focuses on the finished combination of rim and tyre rather than separate parts. The black centre and chrome outer section create a strong contrast that suits touring-style bodies, street conversions and other road-focused shells. The spoke layout keeps the design clean and technical, while the low tyre sidewall reinforces the custom on-road appearance. Directional groove detailing across the tread adds another layer of visual definition and gives the set a purposeful motorsport style. On display shelves, workshop benches or active RC projects, the wheel set adds a clear styling change without altering the overall 1:10 format. Age marking: 14 years and up.

RC tuning parts

1:10 XS Alu Oil Damper Set, RC tuning part

soon available again

The 1:10 XS Alu Oil Damper Set brings hobby-grade suspension tuning to CARSON XS chassis models with 4 matched dampers in an 82 mm format. Aluminium bodies, coil springs and threaded preload adjustment create a mechanical setup option that goes beyond a basic replacement part, adding a more exact way to tune chassis response on RC off-road runs. Designed for the CARSON XS-Chassis platform, the set is stated for 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. That covers Stadium Fighter, Offroad Fighter, Tekuro and Ryken variants named in the data. The oil-filled damper design works through controlled compression and rebound, while the threaded body and adjustment collar allow preload changes that alter how the suspension sits and reacts. With 4 matching units in one set, the suspension layout can be equipped consistently across both axles. On loose ground, rutted tracks and uneven jumps, this kind of tuning part helps shape how the chassis settles after impacts and how the wheels follow the surface. For model-building enthusiasts working on an XS platform, the set adds a clear workshop-focused upgrade path with visible mechanical detail and practical setup potential for 14 Years and up.  Warning! Not suitable for children under 14 years.

RC truck accessories

1:14 Position Light Set Scania, model accessory

soon available again

Heavy haulage trucks stand out through their lighting signature as much as their cab shape, and this 1:14 Position Light Set Scania brings that character into a scale build. Made for the Scania SLT 8x4/4 format, the set adds illuminated detail that sharpens the model's road-going presence in workshop, shelf and driving scenes. The lighting components are supplied as a dedicated model accessory for Models & Accessories projects, with several pre-wired LED elements and cable runs that suit installation on a detailed truck body. The 1:14 scale keeps the set aligned with large-format RC and display truck builds, where visible light points play a major role in the finished look. Amber and clear light elements support the characteristic marker-light appearance associated with heavy truck layouts. Because the wiring is already attached to the light elements, the setup starts from a component group that is structured for hobby installation rather than from loose individual lamps. On a finished Scania build, the illuminated accents come into their own around the cab line, roof area and side sections, especially when the truck is viewed from low angles or in dimmer indoor light. The set suits display-focused detailing just as well as running sessions where the model's outline stays readable through its light pattern. Batteries are not included.  Warning! Not suitable for children under 14 years.

Electronics

1:14 Position-Light Unit FH16, model lighting

soon available again

The FH16 tow truck is known for its broad, light-rich road presence, and this 1:14 Position-Light Unit translates that character into a dedicated lighting set for the model. PCB-mounted LEDs, separate wired light points and long twisted leads give the installation a technical, scale-focused look once fitted into the body. Two compact light boards carry upright clear LEDs and use central mounting holes for secure placement. Additional LEDs sit on separate leads, so individual light points can be positioned away from the boards where the body layout requires them. The installation diagram shows 18 lamp positions with a 1.6 mm drilling pattern and assigns the wiring to channels E, F, G and H for an organised layout. The circuit is shown for 6.0-14 V operation, with a separate note for 12 V use and polarity guidance during connection. This set suits detailed truck builds, restoration work and lighting upgrades on an FH16 tow truck in 1:14 scale. During installation, the routed cables, mounted lamp points and grouped connections create a clean electrical layout that supports marker lights and indicator functions across the model body.

RC tires & rims

1:8 Tires Set On-Road 4S, wheel set

soon available again

This 1:8 wheel set brings together 2 black on-road tyres and rims in a glued, ready-mounted format for RC model use. With a 100 mm overall diameter, 43 mm width and a 17 mm rim driver, the set gives model-building enthusiasts concrete fit data for matching an existing chassis and hub setup before installation. The on-road tyre type suits paved running surfaces and street-style RC setups where a low-profile road pattern is required. The mounted construction means tyre and rim arrive already paired, avoiding separate gluing work and keeping both wheels consistent in size and type. The black finish and multi-spoke rim look shown by the set support a clean competition-inspired appearance on 1:8 models. Age marking: 14 Years. As a replacement set, the 2-piece format fits routine maintenance, a worn rear or front axle refresh, or a visual update on an RC car already built around 17 mm wheel mounting. The dimensions make it easier to compare existing running gear directly when planning the next track-day or car park session.

Li-ion batteries

7.4V 1200mAh Li-Ion Battery, RC accessory

available from December

This 7.4 V Li-Ion battery with 1200 mAh is the specified power pack for the Rock Rider, bringing a concrete replacement option into the RC setup and putting the key electrical data in clear view from the first glance. In the workshop or at the track bag, the compact battery format speaks directly to hobbyists who search by voltage, capacity and model reference rather than broad accessory labels. The data names this version as a Li-Ion battery and links it to the Rock Rider, which makes it useful both as a direct replacement and as a spare kept ready between running sessions. The 7.4 V rating defines the battery class within the setup, while the 1200 mAh capacity gives a clear reference point when matching an existing power system. Because the listing identifies a battery rather than a full vehicle set, the copy stays focused on the power component itself and avoids unsupported claims about included charging hardware or extra electronics. The age marking is 14 years, stated exactly as given in the data. As part of an RC equipment lineup, this battery suits bench preparation, replacement planning and keeping a compatible model ready for the next outing. The named Rock Rider reference helps separate it from generic packs when checking an existing setup or selecting a like-for-like spare.

Li-ion batteries

Bella Luisa JST, battery pack, 7.4V 1200mAh

soon available again

The Bella Luisa battery pack brings a dedicated 7.4V Li-Ion power unit to compatible RC vehicle setups, combining 1200mAh capacity with 8.88Wh in a compact format that fits the technical character of hobby-grade running gear. The blue shrink-wrapped pack, red and black leads and JST connection create a straightforward layout for installation in matching models. As a separate rechargeable battery, this pack is aimed at replacement duty or as an additional power source for longer sessions with compatible Bella Luisa vehicles. The label states fast-charging capability and a maximum charging current of 1C 1200mA, giving a clear charging reference when pairing the pack with suitable equipment. The cable carries a disconnect reminder tag for storage, and the printed handling information specifies charging before first use, correct polarity and unplugging for storage. CE marking and Li-Ion identification are printed on the pack itself. In practical use, this battery suits hobby benches, pit boxes and regular running days where a ready spare pack keeps a compatible model prepared for the next outing. For users maintaining an RC vehicle fleet, a dedicated replacement battery with the correct JST connection helps keep the electrical setup consistent across charging and driving routines.

Chargers & charging cables

Charger cable XT90, charging accessory

soon available again

The Charger cable XT90 adds a dedicated charging link to an RC setup, connecting charging equipment and a matching battery interface through a compact lead built for this specific task. In the product image, the cable is shown with 2 banana plug connectors on one side and a yellow connector housing on the other, creating a straightforward layout for polarity-based connection in the workshop. The red and black wire coding helps distinguish positive and negative lines during charging, while the paired banana plugs suit charger outputs that use this common connector format. As an accessory named for XT90 charging use, the cable is intended to extend an existing charging arrangement rather than replace the charger itself. The product data also names it as an accessory for the 500409073 1:8 Virus Rocket 120 6S 2.4G RTR, giving RC enthusiasts a concrete compatibility reference within the Carson range. On the bench, this kind of charging lead supports routine battery care between driving sessions and keeps the connection path focused on the required interfaces. The age marking in the data is 14 Years.

RC servos

CS-17 Servo, RC servo, waterproof metal gear

soon available again

The CS-17 servo brings a waterproof layout, metal gears and a regular-size format into one compact control component for RC models. In steering systems and other linkage-driven functions, the output shaft moves the mounted horn through the receiver signal, turning electronic input into precise mechanical motion at the chassis. The housing uses a JR plug connection and a 3-wire lead for standard RC receiver hookup. The mounted horn fixes to the splined output shaft with a central screw, and the included cross horn and single-arm horn offer different linkage attachment points for setup changes. Rubber grommets support the mounting points during installation, helping isolate the servo where the chassis passes vibration into the mounting tabs. The short description identifies a 0,2 specification, while the data does not define the unit, so that figure is left unstated here. With its waterproof construction, the servo suits model use on damp ground, wet surfaces and outdoor tracks where exposed running conditions are part of the session. The regular-size case fits the common servo class used across many hobby applications, and the metal gear train makes it a practical choice wherever control inputs need to be transmitted reliably through repeated movement.  Warning! Not suitable for children under 14 years.

RC brushed motors

Electric Motor 540 23T-CB, RC motor

soon available again

The 540 23T-CB Cup Machine brings classic brushed RC drive hardware into a compact motor format with clearly stated performance data for hobby bench planning and drivetrain matching. With a nominal voltage of 6 V, a usable voltage range from 4.8 V to 8.4 V and a peak rotational speed of 23,000 rpm, this motor suits projects where the drive setup needs to be chosen around known figures rather than guesswork. The cylindrical can design uses a front output shaft for connection to the drivetrain, while the attached red and black leads provide the power connection straight from the motor. At maximum efficiency, current consumption is 1.95 A with 61.1% efficiency. A second operating point is also specified with 16,400 rpm, 1.69 Ncm torque, 8.7 A current consumption and 28.8 W output, giving model-building enthusiasts several concrete values to compare when selecting gearing, electronics and running characteristics. On the workbench, these figures help frame a replacement build, a tuning change or a fresh RC vehicle setup with more confidence. In running use, the 540 format and defined voltage window make the motor a practical choice for hobby applications that need a brushed drive unit with stated electrical and mechanical data.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger LiPo 2.2A, charger, 25W

soon available again

The Expert Charger LiPo 2.2A brings a compact charging station to the RC workbench with up to 2.2A charging current, 25W output power and support for Lithium Polymer battery packs. A clear status LED keeps the charging state visible during setup, storage preparation or the gap between driving sessions. Its operating range of 110V to 240V suits common mains connections, so the charger fits easily into home hobby spaces as well as club or event use. Charging support covers 1 x 2S and 1 x 3S packs, giving the unit a defined place in many electric model setups without adding unnecessary complexity. Automatic shut-off ends the process once charging is complete, adding a clear functional safeguard based on the charger's own control cycle. The included contents are the charger, a mains cable and instructions. On a bench beside an RC car, buggy or other electric model, the compact format keeps battery care straightforward and easy to integrate into regular running routines. The focused specification makes it a useful choice where compatible LiPo packs need a dedicated charger with clear status indication and a simple operating concept.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow Plug Rossi R2, engine part, hot insert

soon available again

The glow plug is one of the key working parts in a glow fuel model engine, and the Rossi R2 is specified here as a hot-rated version for model combustion setups. Its compact threaded metal form and rounded contact tip are made for fitting into the engine head, where this small component supports the ignition process during running. Alongside the plug, the set includes a copper sealing washer for the matching installation point. That gives the replacement part and its sealing component in one pack, which is useful when an existing plug has reached the end of its service life or when a fresh spare belongs in the pit box. The clearly stated R2 hot designation helps distinguish this version from other plug types when matching parts for maintenance. 14 Years is the stated age marking. In workshop use, this engine part fits naturally into regular servicing for RC combustion models, whether the task is replacing a worn insert, preparing spares before a running session, or keeping maintenance supplies organised with other engine hardware. The small format also makes it easy to store alongside other model engine essentials.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow Plug Rossi R4, engine part, cold grade

soon available again

The Rossi R4 glow plug is a cold-grade engine part made for nitro model engine setups that depend on the right heat range at the cylinder head. Its compact metal construction combines a threaded shaft, a hex body for tightening and a contact tip at the top, creating the functional layout used for installation and engine operation. A copper sealing washer is included and sits between the plug and the engine head to help create the intended seal at the mounting point. The visible thread and hex profile make the part straightforward to position with the correct tool, while the single-plug format suits maintenance, replacement and tuning work on compatible engines. As a dedicated engine component rather than a general accessory, the Rossi R4 belongs in the workshop kit for glow-powered model running where the specified cold rating is required. On the bench, this part fits naturally into routine service before the next driving session or as a direct replacement when an engine needs a fresh plug. The 14 Years age marking is stated in the supplied data for this hobby accessory, placing it in the enthusiast end of model engine maintenance rather than general toy use.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow Plug Rossi R5, model engine spare part

soon available again

Glow-powered model engines rely on a precisely matched ignition component, and the Rossi R5 is built for that role as a dedicated glow plug spare part. The visible R5 designation and very cold heat range point to use in tuned combustion-engine setups where engine temperature, fuel choice and running conditions call for a colder plug characteristic. The metal glow plug uses a threaded body for fitting into the engine head, and the separate copper washer sits beneath the plug at the seat. That combination gives the engine the installed contact point and the sealing ring required for correct fitment at this specific location. As a compact replacement part, it belongs in the maintenance cycle of glow-fuel RC vehicles and other model-engine applications that use this type of ignition system. The rounded contact tip and threaded section identify it clearly as an engine component rather than a general workshop accessory. In practical use, the Rossi R5 suits bench servicing, routine replacement after engine wear, or tuning changes within a glow-engine setup. The 14 years age marking is stated for this spare part category, and the compact format makes it easy to keep alongside other workshop essentials for model-engine running sessions.  Warning! Not suitable for children under 14 years.

RC brushed motors

Launcher 2.0 Race 12T Motor, RC motor

soon available again

The Launcher 2.0 Race 12T Motor brings high-revving brushed drive power into RC racing builds with 32,500 rpm at 7.2 V and a short-time output of about 160 watts. Its black cylindrical housing, visible brush assembly and pre-fitted red and black wires underline the focused layout of a motor built for direct installation in compatible model drivetrains. With dimensions of 35 x 70 mm, the motor fits a compact performance format that suits many hobby workshop setups where space and component matching matter. The 3.175 mm shaft forms the mechanical connection point for the pinion gear, so rotational force passes straight into the transmission once installed. A weight of 164 g gives a clear planning value when balancing drivetrain components and overall vehicle setup. The brushed construction also makes the motor a relevant choice for enthusiasts working with classic race-oriented electric systems. In running sessions, the fast-revving character suits track-focused RC models that rely on crisp response and strong pull out of corners. The technical figures also make the motor a useful option for rebuilds, replacements or performance-led tuning projects where exact dimensions, shaft size and voltage reference need to match the existing setup.

Light & sound

LED Light-Set 2+2 by Radio, light set, 4.4-6V

soon available again

Radio-controlled lighting adds a clear functional upgrade to an RC model, and this LED Light-Set 2+2 by Radio brings that effect with a compact harness built around 2 red and 2 white LEDs. The transmitter-switchable setup works on 4.4-6V and connects through a 3-pin plug, making it suited to model layouts that already use radio-based control functions. The bundled wiring harness groups the cabling in a tidy central sleeve, with red, black and white leads feeding the light modules and connector in one compact arrangement. That layout helps keep the electronics organised inside the body shell while separating front and rear lighting by colour. The 2 white LEDs suit forward lighting positions, while the 2 red LEDs fit rear placements for a more defined running appearance. The set is an accessory for hobby users aged 14 years and up who want to add a controllable lighting function rather than a fixed always-on setup. Installed in a compatible RC vehicle, the harness supports visible light changes directly from the transmitter during driving sessions. It suits builds that need a clean electronic add-on with front and rear light points, whether for finishing a fresh model or updating an existing chassis with radio-switched illumination.  Warning! Not suitable for children under 14 years.

Light & sound

LED Light-Set 4+4 by Radio, light set

soon available again

LED Light-Set 4+4 by Radio brings transmitter-controlled lighting to RC model setups with 4 white LEDs, 4 red LEDs and an operating range of 4.4 - 6 V. The wired layout supports a clear front and rear light arrangement and adds a functional detail that suits hobby builds with radio-based control. The harness connects the 8 LEDs through a compact plug system, making it suitable for integrating lighting into compatible model vehicles and accessory-focused builds. White and red light points allow a distinct separation between front and rear positions, which helps the finished model read more clearly during driving sessions or display placement. The cable routing gathers the individual light leads into one organised layout, which supports cleaner installation across body sections or mounting points. Minimum age: 14 years. In use, the set suits RC cars and similar model projects where lighting is part of the overall electronics package. Combined with a compatible radio setup, the switchable function adds direct control over the light output and gives the model a more complete road or track-style appearance.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Micro X-Warrior Li-Po Battery, spare battery

soon available again

Small-scale RC driving depends on the right power pack, and this 3.7 V Li-Po battery is made as a replacement battery for the Micro X-Warrior range. With 100 mAh capacity and 0.37 Wh, it matches the compact electrical setup shown for these models and brings the focus back to short, lively runs with the correct battery format. The single-cell pack uses Li-Po technology and a Molex connector, giving the battery a clearly defined connection standard for the compatible Micro X-Warrior versions listed in the product data. It is intended for Carson 1:32 Micro X-Warrior 2.0 2.4G 100% RTR, 1:32 Micro X-Warrior 2.0 2.4G RTR green, and 1:32 Micro X-Warrior 2.4G 100% RTR. The battery itself is a compact pack with red and black leads and a 2-pin plug format visible on the unit image. As a spare pack, it replaces an existing battery rather than changing the vehicle's original specification. This format suits hobby users who keep a Micro X-Warrior in regular use and need the stated voltage, capacity, and connector type to match the vehicle setup. Age marking: 14 years. Scope of delivery: battery pack.

NiMH batteries

NiMH Battery Pack, RC accessory, 7.2V 1000mAh

soon available again

This 7.2 V NiMH battery pack brings a compact power source to compatible RC model setups, with 1000 mAh capacity and a JST connector that suit hobby applications where the right voltage and plug type need to line up cleanly. The green shrink-wrapped pack and direct lead layout keep the format focused on practical installation in model use. The technical data gives clear guidance for matching the pack within an existing setup: 7.2 V defines the operating voltage, 1000 mAh states the stored capacity, and the maximum charging current is 1 A. That combination helps model builders compare connector format, charging requirements and runtime expectations against the needs of a specific vehicle or electronics layout. As a rechargeable NiMH pack, it fits the hands-on rhythm of RC use where charging, swapping and returning to the track are part of the routine. In workshop preparation, the stated figures make it easier to pair the pack with suitable charging equipment before installation in a compatible model. During running sessions, the battery serves as the central power component in an RC setup built around the correct voltage, capacity and JST connection.  Warning! Not suitable for children under 14 years.

NiMH batteries

Optional Battery NIMH 7.2V 700mAh, RC battery

soon available again

A 7.2 V NiMH battery pack with 700 mAh capacity adds a straightforward power option for compatible RC models, with the Tamiya plug and wired lead creating a direct connection between the pack and the vehicle electronics. As an optional battery, it suits use as a replacement pack or as an extra rechargeable unit kept ready between charging sessions. The compact pack format shown for the Carson RC Sport Race Shark setup fits the role of an onboard energy source rather than a loose cell arrangement, which helps keep installation tidy inside a battery compartment. NiMH chemistry makes the pack a rechargeable choice for repeated use, and the attached red and black wires link the battery body to the connector without extra adapters named in the data. The 7.2 V rating and 700 mAh capacity define the pack clearly for compatible models that require this specification. Because the data names a Tamiya plug, the connection standard is already set for matching RC systems built around that plug type. In practice, this battery pack works well as a charged spare kept alongside a compatible model, ready to replace the main pack after a running session. It also suits restoring operation when an original battery has reached the end of its service life and a like-for-like 7.2 V NiMH pack with Tamiya plug is needed.

Model varnishes/ adhesives

Paint Killer Color Remover, model paint stripper

soon available again

Paint Killer is a dedicated colour remover for painted models, built for the moments when a finish needs a second chance. The 100 ml liquid removes X and XF paints, AS and TS spray colours, and PC and PS Lexan colours, opening the way for clean corrections on shells, bodies and other model parts. Its range extends beyond those paint lines to other paint systems up to 2-component paints, which makes it useful across different model-building projects on the workbench. The remover is stated for use on plastic, Lexan, resin, metal and model glazing, so the same bottle can support work on body shells, aircraft parts, tank components and clear sections. Trials cited in the product data report that even 10-year-old Tamiya Color acrylic paint can be removed from tanks, planes or similar models. That gives older builds a route back into the paint booth instead of leaving earlier mistakes locked under ageing colour layers. In practice, Paint Killer suits restoration work, spot correction after a paint mishap, and full stripping before a new finish is applied. A model car body with older PC or PS colour, a tank with dried acrylic layers, or a resin detail part with an unwanted coat can all be prepared again for a cleaner next pass.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Rossi R3 Glow Plug, engine part

soon available again

The Rossi R3 glow plug is a compact engine part for model-building enthusiasts working with nitro-powered RC setups. Its threaded metal body screws into the engine head, while the included copper sealing washer sits at the seat to help create the required seal during installation. The marked medium heat range identifies the plug as an R3 specification for balanced running conditions in compatible model engines. As a service and replacement part, this glow plug belongs in the regular maintenance cycle of combustion-powered RC vehicles and other model engine applications that use this format. The contact tip and threaded section are shaped for direct fitting into the engine head, giving workshop routines a clearly defined spare for worn or spent plugs. In practical use, the plug supports the ignition process inside the engine, where the heated element works with the fuel mixture during starting and running. Whether the task is routine upkeep, replacing a used plug before the next session or stocking core workshop spares, the Rossi R3 adds a concrete engine consumable to the bench. Age marking: 14 Years. The set includes the glow plug and 1 copper washer.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

USB-Charger 7.4V, charger, XHP plug

soon available again

This USB charger is built for 7.4 V Li-Ion and LiPo battery packs with an XHP plug, combining a compact cable format with clearly stated charging data for RC use. The inline unit takes DC 5 V / 2 A through a standard USB-A connection and delivers 7.4 V / 1000 mA to compatible packs, making it a practical charging link between a USB power source and the battery. The white 2-pin connector is matched to the stated XHP format, so the connection type is defined from the outset rather than left to guesswork. Its cable-based layout keeps the charger easy to store in a field box, tool case or workbench drawer, while the small inline module keeps the technical values visible on the unit itself. The charger is listed as an included accessory and is intended for compatible 7.4 V battery packs rather than loose cells or unrelated voltages. In day-to-day hobby use, the charger suits charging routines between driving sessions, maintenance charging for compatible packs, or a compact backup kept alongside RC gear. The 14+ age marking is stated plainly, and the focused specification makes this charger a clear match for setups that use a 7.4 V battery with a 2-pin XHP connection.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Wave Racer BL Replacement Battery, 7.4V Li-Ion

soon available again

The Wave Racer BL replacement battery is specified as a 7.4 V Li-Ion pack with 2500 mAh capacity, giving this power unit a clearly defined match for the named model. As a dedicated replacement component, it focuses the choice on the electrical values that matter for compatibility rather than on generic battery searching. The 7.4 V rating identifies the pack voltage, while the 2500 mAh capacity states the stored charge available within the battery. Li-Ion chemistry places those figures in a modern rechargeable format used for compact RC power packs. Because the product data names the Wave Racer BL directly, the battery can be read as a model-specific spare for maintaining an existing setup with the same stated specification. Batteries are not included with the main vehicle set. In practical hobby use, a replacement pack like this supports continued sessions when an original battery needs changing or when a matching spare is kept alongside the vehicle. The clearly stated voltage, capacity and Li-Ion format also make workshop checks and parts matching more straightforward when comparing an existing pack against the required values.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 Design 6 Spoke Wheel Set, model wheels

available in stores

A 1:10 touring model gains a sharper roadgoing stance with this Design 6 Spoke wheel set in silver. The set contains 4 complete wheel assemblies at 26 mm width, combining rims and tyres in one matching package for a clean, uniform update across the chassis. The silver 6 spoke layout gives each wheel a distinct alloy-style look that suits racing, street and tuned body styles. Because the assemblies are already mounted, the changeover stays focused on fitment and setup rather than matching separate rims and tyres. The 4-piece format supports a full vehicle refresh in one step, whether the goal is replacing used running gear or changing the visual direction of a build. On a 1:10 model, wheel design has a strong effect on the finished stance, and the broad 26 mm format helps fill the arches with a purposeful on-road look. In workshop use, the set suits rebuilds, seasonal refreshes and body changes where a consistent wheel style matters as much as the chassis itself. On the shelf or on the track, the silver finish and spoke pattern give a model car a crisp competition-inspired appearance. Age recommendation: 14 years.

RC tires & rims

1:10 M-Design wheel set, RC wheels, white gold

available in stores

A 1:10 wheel set can change the whole stance of a model, and this M-Design version does it with a sharp white and gold rim layout paired with black low-profile tyres. The 4 matching wheels bring a motorsport-inspired look to touring and drift builds, with the multi-spoke pattern giving the wheel face a clear, technical character. The tyre surface shows a directional tread design with moulded grooves that shape the visual style as much as the running feel. A central hub opening in each rim supports axle mounting on compatible RC vehicles, so the set suits both replacement work and visual updates on an existing chassis. The deep-look rim profile adds extra presence around the wheel arch, while the contrast between the white base and metallic gold spoke inserts gives darker bodyshell colours a stronger outline. The set is supplied as 4 wheels, keeping the appearance consistent across the full vehicle. Mounted on a touring car, drift shell or other 1:10 road-focused model, the wheel design brings out race-inspired body lines and sponsor-style graphics with a more defined finish. For workshop refreshes, rebuilds or custom projects, the M-Design layout adds a distinct tuning accent without altering the core setup of the model.

RC cars

1:10 My First Magic Machine, RC car, 100% RTR

available in stores

A single button press changes the 1:10 My First Magic Machine from an ultra-flat racer into a 4WD off-road vehicle, shifting its stance and opening up a very different driving character. With different designs on the top and bottom, the model also changes its look as it flips and keeps moving through the run. The 2.4 GHz remote control system handles the vehicle wirelessly, and the dual-axle steering mechanism guides the front and rear units separately for agile direction changes. In race form, the chassis measures 335 mm in length and 90 mm in height; in off-road form, it shifts to 270 mm in length and 120 mm in height. Ground clearance changes from 10 mm to 57 mm, and the wheelbase changes from 245 mm to 180 mm, showing how strongly the transformation alters the setup. At 600 g, the model stays light enough for quick reactions while the large rubber tyres work with the changed geometry on mixed surfaces. A 25 minute driving time keeps sessions going across asphalt, gravel and obstacle-strewn paths, where the backflip action can carry the run forward instead of ending it. The set includes the ready-to-run model, 2.4 GHz remote control system, NiMH drive battery 4.8 V / 600 mAh, USB charger, 2x transmitter batteries AA (LR6), and manual, so driving can start after charging.

RC truggies & RC monster trucks

1:10 Rodstar, RC car, 2.4 GHz 100% RTR

available in stores

The 1:10 Rodstar brings hot rod pick-up styling into an off-road RC format, pairing a multi-coloured printed body with a fully assembled ready-to-run layout. At 430 mm long, 310 mm wide and 200 mm high, the truck carries a broad, planted stance that suits gravel paths, compacted dirt and mixed ground. Its 1364 g weight works with the suspended chassis to give the model a settled feel as the wheels move over ruts and small impacts. A heavy-duty front bumper adds a solid visual edge and houses LED lighting that keeps the front end clearly defined in lower light. Splash-proof electronics support driving where damp patches, loose grit and changing ground conditions are part of the route. The included 2.4 GHz RC system gives radio control straight from the set, while the 7.4 V 1500 mAh Li-Ion power pack supplies up to 25 minutes running time per charge. The Rodstar suits quick sessions on open ground, repeated passes over rough surfaces and scale-style cruising with a custom hot rod look. USB charging keeps the drive battery easy to top up between runs, and the included transmitter batteries complete the package for immediate use.

RC tires & rims

1:10 wheel set Rally Design2 (4) gold

available in stores

The Carson wheel set 500900198 "1:10 Rally Des.2" in gold (4 wheels, 26 mm) enhances the look and driving dynamics of your model vehicle. Specially designed for all 1:10 scale models with 12 mm rim drivers, the special rubber compound combines strong grip with excellent handling, while the striking rim design makes your vehicle an eye-catcher for model building enthusiasts.

RC tires & rims

1:10 Y-Design5 Wheel Set, model accessory

available in stores

A 1:10 wheel set can change the whole character of a model car, and this Y-Design5 set does it with a clean grey and black finish, a 26 mm width and a distinctly road-focused look. The 4 matching wheels create a uniform appearance around the chassis, with the multi-spoke rim pattern giving the running gear a sharper, more technical presence. The low-profile tyre shape and curved tread pattern suit on-road and street-style builds visually, while the pre-mounted wheel format keeps the parts ready for direct fitting within a compatible setup. The dark rim colour works well with race shells, tuner bodies and modern touring car styles without overpowering body graphics or livery details. As a wheel set in the Models Supplies category, it also fits naturally into rebuilds, visual refreshes and spare-parts planning for regularly driven RC cars. The Y-Design5 design adds depth through its spoke cutouts and central mounting area, giving the side view of the model a more finished, competition-inspired look. Whether the goal is replacing worn running gear, refining a body-and-wheel combination or preparing a fresh chassis build, this 4-piece set brings a coordinated wheel solution in one pack. The 1:10 format makes it a practical choice for hobby benches where appearance, fit and a consistent road-car style all matter.

RC buggys

1:12 Rock Rider, RC car, 2.4GHz 100% RTR

available in stores

The 1:12 Rock Rider brings compact off-road action into a fully assembled RC format, pairing a 2.4 GHz control system with a modular chassis that can be taken apart and put back together. Front LEDs add clear visibility at the nose of the model, and the detailed print design gives the impact-resistant body a bold trail-ready appearance. At 334 mm long, 260 mm wide and 160 mm high, the Rock Rider combines a broad stance with a manageable size for garden paths, packed dirt and uneven ground. The model weighs 973 g, giving the suspension and tire setup a solid base during direction changes and over small obstacles. A Li-Ion battery rated at 7.4 V and 1200 mAh powers driving sessions of up to 50 minutes, and a USB charger is included for straightforward charging between runs. The fully assembled format keeps the focus on driving, while the modular layout also opens the door to closer inspection of the chassis structure. Running sessions suit rougher surfaces where the suspension travel, tread pattern and compact wheelbase can be put to work. With transmitter batteries and manual included alongside the RC system, the set arrives as a complete 100% RTR package for immediate use

Basic accessories

1:14 Prop.shaft Set 6x6 (4) FH adj.

only available from customer service

500907639 1:14 drive shaft set for the Volvo FH16 timber transporter makes the conversion to all-wheel drive simple and robust. The four-piece set made of hardened steel connects the 2-speed gearbox with distributor and front/rear axles; shaft lengths: 45 mm; 57 mm (57-62 mm); 38 mm (38-43 mm); 67 mm (67-82 mm). Length compensation guarantees safe guidance during loading, deflection and axle articulation.

Basic accessories

1:14 Prop.shaft Set 8x8 (4) Tipper adj.

only available from customer service

Carson 500907642 1:14 Prop.shaft Set 8x8 (4) Tipper adj. is a precise spare parts set for true-to-scale 1:14 models and includes four drive shafts for 8x8 drive variants with adjustable tipper function. Model builders appreciate the exact fit, robust design and the option of repairing or upgrading to restore original function.

RC cars

1:16 Peug.Rally 3008 DKR LOEB 19, RC car

available in stores

The Peugeot 3008 DKR became one of the defining machines of modern rally raid, built for long stages, rough terrain and relentless pace. This 1:16 RC Peug.Rally 3008 DKR LOEB 19 brings that desert-racing character into a compact remote-control car with a 280 mm length, 150 mm width and 110 mm height, creating an agile format for fast runs across indoor floors and outdoor ground. At 552 g, the chassis carries enough weight for a settled feel in motion without losing the quick reactions expected from a smaller scale model. The included 2.4 GHz transmitter supports clean control input, and the differential transmission helps the driven wheels manage power more evenly when the route tightens into bends. A Li-Ion drive battery rated at 7.4 V and 500 mAh powers driving sessions of up to 20 minutes, and the USB charger is part of the set. LED lighting extends the visual effect beyond daylight, while the rally bodywork with race-inspired graphics gives the model a strong shelf presence between runs. The ready-to-run set includes the model, remote control, drive battery, USB charger, 2 transmitter batteries and a manual, so the full driving setup is together from the start. Whether running short sprints through a living room course or guiding the car over compact gravel and uneven paths, the combination of suspension travel, tyre grip and compact dimensions keeps the action focused and easy to place.

RC tractors

1:16 RC Tractor w. front loader, RC tractor

available in stores

A tractor with front loader function brings farm vehicle handling and RC control together in a 1:16 format built for active loading runs. The fully assembled model combines an elaborately decorated chassis with grip rubber tyres in a true-to-original profile, creating a strong visual presence while keeping traction on rough terrain. The 2.4 GHz multi-channel system manages driving and function control through one transmitter, so movement, bucket operation, light, horn and engine sound stay within the same control setup. A built-in Li-Ion drive battery rated at 3.7 V and 600 mAh supports driving times of up to 50 minutes, and the included USB charger keeps charging straightforward between sessions. The front loader handles loads of up to 200 g, which suits repeated scooping, lifting and placing tasks with small materials. A demo function is also built in, adding an extra operating mode beyond manual control. With dimensions of 425 mm in length, 170 mm in width and 205 mm in height, the tractor fits indoor driving sessions as well as compact outdoor terrain with loose surfaces and small obstacles. Included in the set are the ready-to-run model, the 2.4 GHz remote control system, the drive battery, 2 AA transmitter batteries, a USB charger and the manual, so the full driving and loader setup is already in place.

RC lorries & RC trucks

1:20 MB Arocs, garbage truck, 100% RTR

available in stores

Municipal refuse trucks are among the most distinctive working vehicles on city streets, combining heavy-duty transport with tightly coordinated loading functions. This 1:20 MB Arocs garbage truck brings that theme into RC form with a fully assembled 415 x 155 x 215 mm model, a 2.4 GHz transmitter and a 100% RTR setup that puts driving and handling functions into one vehicle. The 1379 g chassis gives the truck a substantial road presence, while the 4.8 V system supports up to 30 minutes of driving time per charge. Alongside steering and drive control, the transmitter operates the loading functions directly, so collection scenes can be played out with more than simple forward and reverse movement. A small dumpster is included for themed handling play, and the combination of lighting, sound and function control gives the truck a more convincing service-vehicle rhythm. The included NiMH drive battery, USB charger and 2 x AA transmitter batteries complete the ready-to-run package. On paving, driveways or short outdoor routes, the MB Arocs can roll up to the bin, trigger the loading action and continue the route with light and sound effects active. The compact 1:20 format also suits indoor driving sessions where the truck's working functions can take centre stage between collection stops.

RC lorries & RC trucks

1:20 MB Arocs, RC cement mixer, 100% RTR

available in stores

The MB Arocs cement mixer brings construction-site character into RC driving with a 1:20 scale format, a 380 mm body and a fully assembled 100% RTR setup. At 155 mm wide, 205 mm high and 1305 g in weight, the truck has a substantial presence on the ground while the yellow cab, multi-axle layout and mixer body create a recognisable work-vehicle silhouette. Its radio system works on 2.4 GHz, and the rear axle drive gives the 4x4 layout the push needed for steady movement during site-style runs. A driving time of 30 minutes supports longer sessions with fewer interruptions. The transmitter also handles several action functions beyond basic driving: LED lighting, engine sound, the horn and the rotating drum are all selected directly from the handset. A demo function runs the vehicle's features automatically, making it easy to see the full function set in motion. The set includes the assembled model, a 4.8 V 400 mAh NiMH drive battery, a USB charger, 2 x AA transmitter batteries, and an instruction manual. On gravel, paving or indoor surfaces, the rotating drum and lighting effects give transport and unloading scenes a more convincing rhythm. With age 8 years and up stated in the product data, the model suits early RC sessions as well as shelf display between runs.

RC cars

1:24 Aston Martin Vantage, RC car, 2.4 GHz RTR

available in stores

British sports car character meets compact radio control in this 1:24 Aston Martin Vantage. The licensed body combines a low coupe profile with front and rear LED lighting, creating a distinctive presence on indoor courses and evening driving sessions. At 195 mm long, 80 mm wide and 49 mm high, the model keeps a small footprint that suits quick direction changes and easy placement on home tracks. The 172 g weight supports agile handling, while the rear differential helps the driven axle work smoothly through bends instead of pushing wide. Fine steering adjustment gives the control system a more exact response, so short corrections and tighter corner entries feel deliberate rather than abrupt. The 2.4 GHz remote control system allows interference-free operation, which is especially useful when several RC models are running in the same area. A 3.7 V 500 mAh Li-Ion drive battery powers the car, and the set includes a USB charger for straightforward charging between runs. As a 100% RTR set, the RC car comes with the model, remote control, drive battery, charger and 2 x LR03 AAA transmitter batteries, so driving can start without extra setup beyond charging. The fast, manoeuvrable layout and realistic sports car look make it equally suited to short sprints across smooth floors, improvised living-room circuits and relaxed display breaks between runs.

RC cars

1:24 Lamborghini Murcielago SV, RC car, 2.4GHz

available in stores

The Lamborghini Murcielago SV brought sharp-edged supercar drama to the road, and this 1:24 RC version translates that character into a compact model with full driving control. At 195 mm long, 80 mm wide and 49 mm high, the ready-to-run car combines a detailed sports car silhouette with a 2.4 GHz remote control system for responsive runs around living rooms, hallways and home tracks. A 3.7 V 500 mAh Li-Ion drive battery powers up to 60 minutes of driving time, and the included USB charger keeps the setup straightforward between sessions. The fully assembled format gets the focus onto driving rather than setup, while the 172 g weight keeps the model light in hand when moving from shelf to floor. Front and rear LED lighting extends the visual effect into dimmer conditions, giving the body lines and rear spoiler extra presence once the room lights drop. The remote control system is designed for interference-free operation, which helps when several 2.4 GHz vehicles are in use nearby. Short sprints down a corridor, tighter turns around chair legs or repeated laps on a small practice layout all suit the compact footprint. Age 6+ is stated in the product data, and the complete set includes the car, remote control, drive battery, USB charger and transmitter batteries for a quick start to the next run.

RC cars

1:24 Lamborghini Veneno, RC car, 100% RTR

available in stores

The Lamborghini Veneno brought extreme supercar styling to the road, and this 1:24 RC version carries that same low, angular character into compact driving sessions. As a fully assembled ready-to-run RC car, it combines a 2.4 GHz control system with a 195 mm body, 80 mm width and 49 mm height for quick laps across smooth indoor surfaces. The included Li-Ion drive battery delivers up to 60 minutes of driving time at full capacity, and the USB charger keeps the setup straightforward between runs. At 172 g, the model stays light in hand and responsive in motion, while the pistol-grip transmitter uses a steering wheel control and trigger throttle for familiar RC handling. Front and rear LED lights sharpen the car's presence when the room gets darker, and the underside trim dial marked for left and right steering correction helps align the tracking when the car pulls off line. The non-slip rubber tires support controlled acceleration and cleaner corner entry on short home circuits. Age 6 years and up is stated for the model. On a hallway course, around furniture or across a start-finish line marked out at home, the compact scale and agile response keep each run focused on timing, steering input and repeatable lines rather than sheer size.

RC cars

1:24 Mercedes-Benz SLS AMG, RC car, 100% RTR

available in stores

The Mercedes-Benz SLS AMG brought long-hood sports car proportions and distinctive gullwing-door styling into a modern performance coupe, and this 1:24 RC version carries that character into a compact ready-to-run format. With a fully assembled chassis, 2.4 GHz remote control system and a 3.7 V 500 mAh Li-Ion drive battery, the model moves from charging to driving with very little setup and keeps the focus on the car itself. At 195 mm long, 80 mm wide and 49 mm high, the body has a low, planted stance that suits quick runs across smooth indoor surfaces. The 172 g weight keeps the handling light, while the steering fine adjustment helps dial in straighter tracking and tidier line changes. Front and rear LED lighting adds a clear visual accent once the room gets darker, and the non-slip rubber tires support controlled acceleration and direction changes. The included USB charger covers the drive battery, and 2 x LR03 AAA batteries are supplied for the transmitter. A maximum operating time of 60 minutes gives the compact sports car enough range for repeated laps, short head-to-head sessions or casual driving breaks between other hobby projects. Age 6+ is stated in the product data, and the fully assembled format makes the focus immediate: switch on, steer with the 2.4 GHz system, and guide the SLS AMG through fast, agile runs with detailed road-car styling in view.

Mini RC cars

1:32 Volkswagen Beetle, RC car, 2.4 GHz RTR

available in stores

The Volkswagen Beetle remains one of the most recognisable car shapes ever built, and this 1:32 RC version translates that silhouette into a compact off-road runner with a bold lifted stance. At 135 mm long, 85 mm wide and 85 mm high, the ready-to-run model combines classic Beetle lines, oversized treaded tires and red LED underbody lighting for eye-catching driving sessions at home. The interference-free 2.4 GHz radio system supports precise control, while the 3.7 V 500 mAh Li-Ion drive battery delivers up to 60 minutes of runtime per charge. A weight of 273 g keeps the model easy to handle and quick to redirect through narrow spaces. The included Volkswagen license ties the body design to the named vehicle, and the compact proportions suit tabletops, smooth floors and improvised obstacle routes. The handheld controller and USB charger are included in the set, keeping the focus on driving rather than extra setup. Short bursts across the living room, figure-eight turns around chair legs or evening laps with the red underglow all suit this small-scale RC car. The fully assembled format also makes it easy to move from charging to driving whenever a quick session fits the day.

Mini RC cars

1:32 VW Beetle Rally, RC car, 2.4 GHz RTR

available in stores

The Volkswagen Beetle became one of the most recognisable car shapes ever built, and this 1:32 VW Beetle Rally translates that silhouette into a compact RC car with a rally-inspired stance. At 135 mm long, 85 mm wide and 85 mm high, the ready-to-run model combines agile handling with a size that suits quick driving sessions on smaller courses, tabletops or smooth ground. The 2.4 GHz radio system gives the car its control link, while the 273 g weight keeps the model light enough for nimble direction changes. The included remote control, drive battery and USB charger mean the main running components are already in the set, so the focus stays on driving rather than extra setup. A 3.7 V Li-Ion drive battery powers the car for up to 60 minutes of runtime, supporting longer sessions before the next charge. The Volkswagen licence adds the named vehicle identity from the original subject to the rally-themed body. Red LED underbody lighting stands out especially well in dimmer indoor spaces, where the glow adds movement and presence as the Beetle changes direction. Treaded tires help the car hold its line on mixed surfaces, making short sprints, looping turns and obstacle runs feel active and controlled. Age 6+

Mini RC cars

1:60 Nano Racer Dino Cage 2.0, RC car, RTR

available in stores

Small scale, quick reactions and close racing make the 1:60 Nano Racer Dino Cage 2.0 a lively RC car for compact spaces. Its 2.4 GHz system allows up to 50 vehicles to run at the same time, turning a tabletop circuit, hallway sprint or living-room slalom into a shared race without channel clashes. The RTR format brings together the assembled model, a handheld controller and a 1.2V 80mAh NiMH drive battery in one compact setup. Charging takes place directly via the remote control, which keeps the car ready for repeated runs without a separate charging routine. The rear axle uses full suspension, giving the chassis more compliance when the surface changes and helping the car hold its line through quick steering inputs. Fast, manoeuvrable handling suits short straights, improvised obstacles and rapid turns where a larger vehicle would need more room. Age 8+ marks the recommended range for use. Between races, the display case keeps the Nano Racer stored neatly and ready for the next session. Solo laps work just as well as side-by-side runs, whether the course is built from books, boxes or track markers on the floor.

Mini RC cars

1:60 Nano Racer Dino Race 2.0, RC car, RTR

available in stores

Small scale, quick reactions and a bold Dino Race look give this 1:60 Nano Racer 2.0 its own lively track presence. The ready-to-run RC car comes fully assembled with a remote control, a 1.2V 80mAh NiMH drive battery and a display case, so the compact format moves straight from storage to the next driving session. Its 2.4 GHz control system is built for clean signal handling when several racers share the same space, and the platform supports up to 50 vehicles running at once. That makes the model especially suited to tabletop circuits, hallway sprints and side-by-side races where quick steering inputs matter. The rear axle uses full suspension, adding a more controlled feel when the chassis changes direction rapidly. Charging takes place through the remote control itself, which keeps the routine simple between heats and helps the car return to the track quickly after a run. Up to 20 minutes of driving time per full charge gives enough time for repeated lap battles, short knockout rounds or casual practice runs. With an age marking of 8 years and up, the Nano Racer Dino Race 2.0 fits compact RC play where small space, fast handling and easy race organisation matter most.

Mini RC cars

1:60 Nano Racer Striker, RC car, 2.4 GHz

available in stores

The 1:60 Nano Racer Striker brings compact RC action into a small, fast-moving format, pairing a sporty body shape with 2.4 GHz control for lively indoor racing. In turquoise with black graphics, dark windows and a rear spoiler, the fully assembled car cuts a sharp figure whether it is lining up on a track mat or weaving across a tabletop course. Its interference-free radio system reaches up to 30 m and supports running up to 50 vehicles at the same time, which gives group races a clear technical advantage over single-frequency setups. The included remote control also handles charging, so the 1.2 V rechargeable NiMH drive battery can be topped up without a separate charging routine. With 20 minutes of driving time, the model has enough runtime for repeated sprints, quick direction changes and short head-to-head sessions. The controller layout shown with directional buttons and status lights keeps the driving functions clear and easy to follow. This ready-to-run set includes the fully assembled car, a 2.4 GHz remote control with charging plug, a rechargeable 1.2 V/80 mAh drive battery and instructions. Age 8 years. On smooth home surfaces, racing mats or a cleared table, the Nano Racer Striker suits compact courses where its nimble size and quick reactions come into their own.

RC buggys

1:8 Akuma Buggy, RC car, 4WD 100% RTR

available in stores

The 1:8 Akuma Buggy brings large-scale off-road driving into a 505 x 365 x 220 mm format with a 4WD layout, a 2050 Kv 3-pole brushless motor and a 100A 4S drag-style ESC with cooling fan. The colour-printed body, 3-position adjustable rear spoiler and 17 mm aluminium wheel hexes give the buggy a focused racing stance before the first full-throttle pass. A 3 mm aluminium chassis plate forms the base for the drivetrain, while the aluminium motor heatsink supports cooling during hard acceleration. The steering system uses an adjustable aluminium steering plate, and the 20 kg metal-gear servo translates radio input into direct front-wheel response. Aggressive off-road tyres with foam inserts are glued in place for consistent running, and the hardened steel drive shafts connect the powertrain under load. The included 2.4 GHz RC system, 2 x 7.4 V 3800 mAh LiPo drive batteries, charger and 4 x LR06 AA transmitter batteries make the set ready to drive straight after charging. Driving time reaches 10 minutes, and the buggy weighs 3909 g. Forest tracks, compacted dirt and rough open ground suit the Akuma Buggy especially well, where the suspension travel and 4WD drivetrain can be used to carry speed through loose sections. The large 1:8 format also gives the chassis and electronics layout clear presence on the bench between charging sessions and setup checks.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Hex Wheel nut (4) M12x1,00 V4/FY

only available from customer service

Carson 500908182 1:8 wheel nuts M12x1.00 (4) made of aluminum, 17 mm wrench size, 6 mm width and ribbed inside for a secure fit on the wheel. The four nuts fit Virus 4.0/4.1/4.2/Race/Truggy Brushless, Virus 4.0 Nitro as well as FY8, FY8 2.0, FY10 and FY10 2.0 and facilitate precise mounting.

RC buggys

1:8 Monsuta, RC car, 100% RTR orange

available in stores

The 1:8 Monsuta 100% RTR orange brings large-scale off-road action straight to the ground with a 530 mm long chassis, fully suspended layout and 2.4 GHz radio system. Its 355 mm width and 200 mm height give the truck a broad, planted stance that suits rough tracks, loose dirt and uneven terrain. The ready-to-run set includes the remote control, a 7.4 V 3000 mAh Li-Ion drive battery, a USB charger, 4 x LR06 transmitter batteries and instructions, so the full driving package is in the box from the start. Water-resistant RC components support running on demanding surfaces where dust, splashes and changing conditions are part of the session. The quick-change battery mount shortens stops between runs and makes battery swaps more direct at the bench or trackside. At 2384 g, the chassis carries enough mass for a substantial road feel while the suspension works to keep the truck settled as the terrain changes. Whether the route runs across packed earth, gravel or a backyard jump line, the Monsuta is built around clear control response and off-road grip. A compatible spare battery is available separately for longer driving sessions with less downtime between packs.  Warning! Not suitable for children under 14 years.

RC buggys

1:8 Specter Pro BL 4WD 6S RTR, RC buggy

available in stores

The 1:8 Specter Pro BL 4WD 6S RTR brings brushless buggy performance onto the Type Virus chassis with a setup aimed at fast off-road running and high-speed on-road gearing changes. A 2200kV motor with aluminium heat sink works with a 150A Hobbywing speed controller and integrated fan, while the XT90 connector system is built for low-loss current transfer in 6S LiPo operation. The drivetrain uses steel differentials at the front, centre and rear, reinforced steel drive shafts and full ball bearings to keep power delivery direct through the 4WD layout. Suspension hardware combines 3 mm aluminium shock towers, front and rear stabilizers, adjustable metal steering linkages and oil-filled shock absorbers with 100/130 mm length and long travel. A waterproof 30 kg steering servo with metal gearbox handles steering input with a precise response under demanding running conditions. Rough off-road tyres with foam inserts add grip on loose ground, while the included extra pinion opens an on-road setup with a stated top speed increase up to 115 km/h. The ready-to-run package includes a 2.4 GHz 3-channel remote control with a range of up to 150 m, so the buggy is set up for immediate radio control use. 14 years+ marks the recommended age. 2 x 11.1 V LiPo batteries and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC buggys

1:8 Virus 4.2 XL 100% RTR black/turquois

available in stores

Ready to drive model, 2.4 GHz RC system, 2 x LiPo driving battery 7,4V/3800mAh, plug charger, 4 x transmitter batteries LR06/AA, instructions WARNING! Not for children under 14 years. The packaging has to be kept since it contains important informations. Illustration may vary from actual product in the box. TAMIYA-CARSON reserves the rights to change, update or replace any component at any time.   Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 MB Unimog U406, RC vehicle, 100% RTR

available in stores

The MB Unimog U406 has long been associated with compact utility work, and this 1:87 version brings that character into a radio-controlled format with a road and rail setup in one model. As a 100% RTR vehicle, it arrives ready assembled with a 2.4 GHz remote control system, a Li-Ion drive battery rated at 3.7 V and 75 mAh, and 4 AAA transmitter batteries for immediate operation. The conversion for rail use adds a distinctive function beyond standard micro RC driving. A track guide mounts under the chassis, and the included towing bar allows a wagon to be attached for railway-themed scenes. The Reflex Stick Micro transmitter links compact dimensions with proportional control, so throttle and steering inputs can be adjusted with fine accuracy instead of simple on-off commands. A switchable signalling light extends the municipal service look, while the detailed finish and decoration give the model a strong presence in H0 scale environments. Charging runs through the transmitter, keeping the setup compact between driving sessions. On a model railway, the Unimog can move from a station yard to the rails with the conversion fitted, then return to road use for layout scenes away from the track. In a display cabinet or on a diorama, the painted bodywork, warning markings and utility-truck proportions give the model a clear role within maintenance, service or municipal settings.  Warning! Not suitable for children under 14 years.

LiPo batteries

3,7V/1600mAh LiPO Race Battery

only available from customer service

The replacement battery 500608243 (3.7V/1600mAh) from Carson is the perfect power reserve for the X4 Dragon 330 quadcopter (500507152/59) and provides reliable power via the Molex connector. Model builders appreciate the true-to-original fit and spare part reliability, which enable long-lasting flying fun and uncomplicated replacement.

Li-ion batteries

7,4V/1200mAh Li-ION Race Akku JST. HC

only available from customer service

Carson battery 500608257 (7.4V/1200mAh LiION, JST connector) is the original replacement battery for the SWAT model 500907321. Model building enthusiasts appreciate the precise replacement and the uncomplicated, direct connection via JST to minimize downtimes and make the vehicle ready for use again quickly.

RC shock absorbers & damper bridges

Alu damper 75 mm, RC damper set for 1:10

available in stores

Suspension tuning plays a central role in how a 1:10 RC chassis settles, rolls and tracks through corners, and this aluminium damper set brings that adjustment point into a compact 75 mm format. The set contains 2 dampers with coil-over springs and a metal construction that suits replacement work, rebuilds and workshop-led setup changes on compatible models. The dampers use threaded aluminium bodies, allowing the spring preload to be altered directly on the unit rather than through fixed-position parts alone. That layout helps when ride height and suspension response need to be matched more closely to the chassis setup already in use. The eyelet mounting points at the upper and lower ends follow a familiar RC suspension format, giving each damper a clear mechanical role between chassis and suspension arm. The included scale reference of 1:10 places the set within a widely used model category, where exact component length and mounting style are central to fitment. In practice, a pair like this suits maintenance benches, parts boxes and planned suspension updates on RC cars that use compatible 75 mm dampers. Whether replacing worn units or refining a running setup, the 2-piece configuration supports axle-based installation and keeps the focus on controlled suspension movement rather than improvised parts matching.

Catalogues & merchandise

CARSON Leaflet 2025

available in stores

RC helicopters

Cyber Copter IR 2Ch RTF, RC helicopter, red

available in stores

The Cyber Copter IR 2Ch RTF brings compact helicopter flying into a format that is easy to start and satisfying to control. Its red fuselage, 230 mm length and 190 mm rotor diameter create a nimble indoor model that moves through living rooms, hallways or open office spaces with a light 35 g takeoff weight and a top speed of up to 10 km/h. An integrated gyroscope supports stable flight behaviour, while the infrared control system works with 2 channels for direct command over direction changes. Left and right trim adjustment allows finer correction when the helicopter drifts, helping each flight line stay cleaner across repeated takeoffs and landings. Switchable LED position lights can be activated from the transmitter, which keeps the model clearly visible when room light drops at dusk. The built-in 3.7 V / 150 mAh LiPo flight battery delivers up to 8 minutes of runtime per charge, and USB charging keeps turnaround simple between sessions. The ready-to-fly setup keeps the focus on flying rather than preparation, with the model, remote control, USB charger and 3 x LR03 / AAA transmitter batteries included. Recommended from 8 years. Short practice runs around furniture, controlled hovering in open floor space and evening laps with the LEDs switched on all suit the compact format well.

RC helicopters

Cyber Copter Polizei, RC helicopter, 2.4GHz RTF

available in stores

The Cyber Copter Polizei brings compact rotorcraft action into a ready-to-fly format with a 2-channel 2.4 GHz control system, integrated gyroscope and switchable LED position lights. Its futuristic Polizei styling, 230 mm length and 190 mm rotor diameter create a clear visual presence while keeping the helicopter sized for indoor flying. The 3.7 V 150 mAh LiPo flight battery delivers up to 8 minutes of runtime and charges via USB, making quick turnaround between sessions easy through a laptop, power bank or USB adapter. Left and right trim adjustment helps refine the flight path when small corrections are needed. At 35 g takeoff weight and 95 mm height, the model stays light and manageable in enclosed spaces. The included set covers the ready-to-fly helicopter, remote control, USB charger, 3 x LR03 AAA transmitter batteries and manual. Short practice flights in a living room, hobby room or open indoor area let the gyro support smoother hovering attempts and steady directional changes. As confidence builds, the helicopter can be guided through tighter turns, low passes and illuminated evening laps at speeds of up to 10 km/h.

RC servos

Digitalservo CS30- 30kg ballb./JR plug

available in stores

Carson CS-30 digital servo (500502053) is a powerful, digital standard servo specially developed for demanding 1/10th and 1/8th scale models. Waterproof metal gearing and ball bearings ensure durability; it delivers 300 N-cm at 4.8-6 V and responds in 0.19 s. Compact (40×20×38 mm), 50 g, incl. servo horn set - ideal for wet and cold applications.   Warning! Not suitable for children under 14 years.

RC aircraft

Easy Skydreamer, RC glider, 2.4GHz 100% RTF

available in stores

The Easy Skydreamer brings compact RC flying into a light 240 x 240 mm flying wing with a 20 g airframe and a 2.4 GHz control system. Its 6-axis gyroscope works continuously during flight to steady the model's attitude, so launches, direction changes and short correction inputs feel more controlled in the air. The Flexipor body keeps weight low while giving the glider a resilient structure suited to regular use. Twin propellers mounted on the wing drive the model forward, while the broad wing layout and twin rear fins support a stable flight image that is easy to read from the ground. The included 3.7 V 150 mAh LiPo flight battery powers sessions of up to 15 minutes, and the set also contains a USB charger plus 2 x AA transmitter batteries. 100% RTF status means the main flying equipment is already in the box, so the focus stays on handling, trim and airtime rather than extra setup. Open outdoor spaces such as a garden, park or sports field give the Easy Skydreamer room to show its steady character and compact size. With its low weight, stabilising gyro support and complete RC set, it suits relaxed practice flights, repeated take-offs and short flying sessions with quick charging between runs.

RC helicopters

Easy Tyrann 250, RC helicopter, 2.4 GHz RTF

available in stores

The Easy Tyrann 250 brings coaxial helicopter flight together with a bold shark-look canopy and a fully equipped 100% RTF setup. Its 2 counter-rotating main rotors work with an integrated electronic gyro to create a controlled, steady flight character, while the red, white and grey body stands out clearly in motion. The 2.4 GHz remote control system gives dedicated radio control for single-user flying, and the included 3.7 Volt LiPo flight battery powers the helicopter for up to 8 minutes per charge. Speeds of up to 25 km/h add a lively pace once the controls are mastered. Built-in LED lighting keeps the helicopter visible in lower light, making dusk flights easier to track. The set is marked for ages 12 years and up and is supplied as a ready-to-fly model rather than a partial kit. Flying sessions can start after charging, with the charger and 4x LR06/AA transmitter batteries already included in the set. The compact helicopter suits living room practice, calm garden flights and repeated hover training, where the gyro support and coaxial layout help keep control inputs clear and readable. Tested to EN 71-1, EN 71-2, EN 71-3 and EN 62115

RC busses

FlixBus 2.4GHz 100% RTR, RC bus, LED lighting

available in stores

The FlixBus 2.4GHz 100% RTR brings the look of a modern long-distance coach into RC form with a 395 mm body, front LED lighting and detailed FlixBus printing. Its 2.4 GHz radio system gives the bus clear control input, while the long 60 minute driving time keeps sessions moving across hallways, living spaces or other smooth indoor routes. The coach measures 395 x 80 x 120 mm and weighs 541 g, giving the chassis enough length and presence to make the bus shape read convincingly in motion. Tinted windows, visible seating, mirrors and molded exterior details strengthen the scale effect beyond a simple toy vehicle. The tough body is built to cope with minor contact during everyday use, which suits early practice laps as well as repeated route driving. A 4.8 V 500 mAh NiMH battery pack powers the model, and the set also includes a USB charger, 2 x LR06 AA transmitter batteries and the fully assembled bus. With 8 years as the stated minimum age, the model fits entry-level RC driving without reducing the appeal of its coach styling. It works well for simple stop-and-go runs, careful cornering around furniture and repeated passes that show off the illuminated front end and long bus proportions in motion.

RC combustion engines & glow plugs

Force Engine 32R/5,3ccm with SG Shaft Pu

only available from customer service

Whether it’s for high-performance or hobby runs, this engine is right for you! For many years, Force has produced extremely reliable, robust and above all high-performance internal combustion engines. Very high RPM says it all. Modern, exacting production methods and premium materials are a given. All engines are double ball raced. The carburettors are pretuned at the factory. Easy rope or electric starting, and adjustment behaviour, make handling this engine very simple. With SG Shaft Pull Starter. Technical data: Type 32R/ABC/RS-SG Piston Displacement 5.23 ccm Power 2.2 kW (2.99 PS) RPM 33.000 Weight 467 g

RC combustion engines & glow plugs

Force Motor 15S/2,5 ccm OS pull shaft

only available from customer service

FORCE engine 15S 2.5 ccm OS/cable (500901008) is a powerful all-rounder with side exhaust, equipped with cable starter, slide carburetor and OS shaft. The ABC running gear delivers 0.9 kW (1.2 hp) at 29,000 rpm; displacement 2.49 ccm, bore 15 mm, stroke 13.6 mm, weight 262 g - ideal for ambitious model builders.

Remote-controlled systems

FS 15K Reflex Stick Pro 4, RC remote control

available in stores

The FS 15K Reflex Stick Pro 4 LCD-MFC 2.4GHz brings broad channel control and precise radio setup to complex RC builds. With 15 controllable channels, a 2.4 GHz FHSS system and a range of up to 150 m, this RC remote control suits functional models that need more than basic steering and throttle, whether on the workbench or out in operation. The included 15-channel receiver is compact and lightweight, which helps when space inside a model is limited. A blue backlit LCD display keeps key settings visible, while 15 model memories store different vehicle setups in one unit. Channels 1-4 can be adjusted with dual rate, EPA and EXP, and servo reverse with trim function supports accurate channel setup across the system. The transmitter operates at 4.8 - 6 V and uses 4 AA batteries. Graupner J/R connector compatibility adds flexibility when integrating existing RC components. Full compatibility with the Tamiya MFC sound unit allows its functions to be controlled directly via buttons, which is especially useful in detailed truck and functional model layouts. New stick units with sensitive mechanics, 3-position toggle switches, 3-position push buttons with centre position and height-adjustable CNC-milled aluminum sticks give the control layout a more tailored feel during longer driving sessions. A receiver, instruction manual and transmitter are included.

RC shock absorbers & damper bridges

FY8 Shock Absorber Unit (2)

only available from customer service

Carson FY8 shock absorber unit 500405312 in a kit of 2 is an original spare part for the 1:8 scale models DESTROYER and DFFY. The two units supplied are specially designed for these vehicles and enable uncomplicated replacement to repair the chassis - ideal for model building enthusiasts.   Warning! Not suitable for children under 14 years.

RC receivers and accessories

KO MC-8 Xpansion Unit EXP-801 MFC-03/02

only available from customer service

500501547 KO MC-8 Xpansion Unit EXP-801 MFC-03/02 from Carson extends the KO PROPO MC-8 remote control system and enables direct control of the TAMIYA MFC-03 and MFC-02 at the touch of a button. Up to ten functions can be controlled, installation is simple, ideal for model builders who need more control.

Replacement & spares for combustion models

KOD GP Motor Mounts

only available from customer service

The Carson 500205992 KOD GP engine mounts made of aluminum are a perfect fit for the 500202020 model and provide the necessary mounting base for the engine. For model building enthusiasts who value original spare parts, they ensure simple installation and reliable integration into the chassis. A high-quality original part from Carson that delivers confidence in function and fit.

RC speed boats

Nano Racer Jetski 2.4G

available in stores

Article number: 500108056 Product: Nano Racer Jetski 2.4G Action on the water! With the Nano Racer Jetski, RC fun on the water becomes a reality! The ready-to-drive jet ski model is fully functional for a full 15 minutes immediately after unpacking and briefly charging for around 30 min. and guarantees pure action! It is controlled with a 2.4 GHz radio remote control with a range of up to 40 meters. The set also includes a LiPo battery 3.7 V/100 mAh, and clear instructions. Thanks to sophisticated safety training, the ship's propellers only work when they come into contact with water. All RC components are 100% waterproof! Fully assembled model, 2.4GHz remote control unit, LiPo drive battery 3,7V/100 mAh, instruction manual.

RC helicopters

Nano Tyrann 230 IR, RC helicopter, 2-channel

available in stores

The Nano Tyrann 230 IR brings compact RC flight into a 225 mm format with a 180 mm rotor diameter and a flying weight of only 29 g. Its infrared control and 2-channel layout keep the handling focused and approachable, while the red and black helicopter shape, landing skids and illuminated nose give it a clear presence during indoor hovering. A 3.7 V LiPo flight battery powers the model, and the set includes a USB charger plus 3 AA transmitter batteries for the handset. The maximum speed reaches 10 km/h, which fits short indoor runs with controlled climbs, gentle turns and small corrections around furniture or open floor space. The low weight helps the model react quickly to steering inputs, and the compact dimensions make it easier to manage in rooms where larger aircraft would need more clearance. Ready-to-fly equipment means the helicopter, control system and power components are matched as a complete set. Indoor sessions suit living rooms, hobby rooms and other enclosed spaces where the helicopter can lift off from its skids, hover at low height and circle back for repeated take-offs and landings. Age 8 years+ is stated for the model, making it a compact RC aircraft for early flight practice and short, repeatable flying sessions indoors.

RC speed boats

Nano Wave Tiger 2.4G

available in stores

Fully assembled model, 2.4GHz remote control unit, LiPo drive battery 3,7V/90mAh, instruction manual. Required batteries: 3x AA

RC speed boats

RC Coastguard Boat 2.4G, RC boat, 100% RTR

available in stores

The RC Coastguard Boat 2.4G brings patrol-boat styling, transmitter-controlled functions and a 560 mm hull together in one ready-to-run watercraft. With 2 high-torque brushed motors, a 2.4 GHz remote control system and a driving time of 45 minutes, it creates lively action across ponds, lakes and calm inshore water while the roof lights and spray function sharpen the rescue-boat look. The fully assembled model measures 560 x 147 x 215 mm and weighs 717 g, giving the hull a substantial presence on the water without adding setup work before the first run. A 7.2 V 1000 mAh NiMH drive battery powers the boat, and charging runs through the included USB charger. Full driving functions cover forward, reverse, left and right, so tight turns, straight passes and quick direction changes stay under direct control. The propeller shut-off is active only in water, matching the boat's intended operating environment. Ready-to-run contents include the 2.4 GHz remote control, the NiMH drive battery, USB charger, 2× transmitter batteries and a screwdriver. On the water, the coastguard theme comes through in more than the hull shape alone. The controllable water cannon and switchable lighting suit harbour patrol scenes, rescue-style chases and spray action near the shoreline, while the 100 m radio range leaves room for wider runs and longer passes.

RC speed boats

RC Jet Ski 2.4GHz, watercraft, Ready to Run

available in stores

The RC Jet Ski brings compact 2.4 GHz water action to ponds and basins with a fully assembled 220 mm hull and full steering control. Forward, reverse, left and right functions make it easy to guide the model across calm water, while the 179 g weight keeps handling light and responsive during quick direction changes. A 3.7 V 500 mAh LiPo drive battery powers running sessions of up to 30 minutes, and the included USB charger keeps charging straightforward between outings. The water-only safety shutdown means the drive system activates only on or in water, which prevents dry running when the model is being carried or set down at the edge. Waterproof RC components suit repeated use in splash-heavy conditions, and the Ready to Run setup includes the 2.4 GHz remote control system plus 2 x LR06 AA transmitter batteries. A seated rider figure adds a sporty jet ski look without changing the compact footprint. The set suits short sessions at the garden pond, local lake edge or a larger water basin where tight turns and stop-start manoeuvres can be enjoyed in a small area. With the model, drive battery, charger, transmitter and batteries included, the focus stays on getting onto the water and making the most of each 30-minute run.

RC speed boats

RC Police Boat 2.4G, RC boat, 100% RTR

available in stores

The RC Police Boat 2.4G 100% RTR brings fast water action together with full radio control and a detailed police-boat look. At 560 mm long, 147 mm wide and 215 mm high, the hull cuts a striking profile on the water, while the 2.4 GHz system keeps handling precise across forward, reverse, left and right commands. Two high-torque brushed motors provide the drive, and the 7.2 V 1000 mAh NiMH battery supports up to 45 minutes of running time under full load. Charging takes place via the included USB charger, so the battery pack is easy to top up between outings. A propeller shut-off function works only in water, matching the boat's intended use. With a weight of 717 g, the model combines a substantial presence with a format that stays easy to carry to the shoreline or pond. The ready-to-run setup includes the fully assembled model, a 2.4 GHz remote control, the NiMH drive battery, USB charger, 2x AA transmitter batteries and a screwdriver. The transmitter also controls the rotating water cannon, LED position lights and the searchlight, adding extra functions beyond steering alone. On lakes, ponds or calm coastal water, the police styling, light functions and active spray feature create lively patrol and pursuit scenes from the first launch.

Additional spares

Rudder St. Tropez/ Sunset

only available from customer service

Carson rudder 500109016 for St. Tropez/Sunset made of metal is the perfect solution for demanding model builders, combining robustness and precise steerability. Specially adapted to the models mentioned, it guarantees an exact fit, long-lasting function and facilitates the professional restoration or upgrading of your model.   Warning! Not suitable for children under 14 years.

RC receivers and accessories

RX Switch Harness w/Dry battery holder

only available from customer service

Carson 500503071 KO switch cable with battery box offers model builders a reliable external power supply for the KO PROPO MC-8 - particularly important for combustion models. The box holds four AA batteries (1.2 V), the 340 mm long, continuously soldered cable is ready for use with UNI/FUT plug. The on/off switch can be mounted using two M2 screws (drilling distance 19 mm), switch dimensions 26×11×20 mm.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Speed Warrior orange body : 500404237

only available from customer service

Body incl. Speed Warrior orange sticker  Warning! Not suitable for children under 14 years.

RC helicopters

Starter Tyrann 230 IR 2Ch 100% RTF red

available in stores

The perfect beginner: The Carson Starter Tyrann 230 IR is the ideal helicopter for entering the world of remote-controlled flying machines! Sophisticated steering trim makes it easy to control the indoor helicopter, even for beginners. The Starter Tyrann is ready to fly and equipped with 1x IR remote control system, 1x LiPo flight battery (3.7 V/150 mAh), 1x USB charger, 3x LR06 / AA transmitter batteries and detailed instructions. Fully charged and at full capacity, up to 11 minutes of exciting flight time are guaranteed. Speeds of up to 10 km/h are possible. The LED position lights on the helicopter can be switched via the transmitter. Ready for take-off?! Flight-ready model, remote control unit, LiPo flight battery 3,7V/150mAh, 3x AA transmitter batteries, USB charger, instruction manual. WARNING! Subject to technical change and change of color. Not suitable for children under 8 years. Only use under the supervision of adults who have read the enclosed instructions. Before operation read through the instructions with your child. For domestic use only (house and garden).   Warning! Not suitable for children under 14 years.

RC helicopters

Starter Tyrann 230 IR 2Ch, RC helicopter, RTF

available in stores

Compact dimensions, simple control and a flight-ready setup make the Starter Tyrann 230 IR 2Ch a focused entry point into indoor helicopter flying. At 225 mm long, 97 mm high and only 31 g in weight, the model stays light in the air and easy to handle around open space in a room. The coaxial rotor layout with a 180 mm rotor diameter gives the helicopter the stable lift needed for early hovering practice, while the small tail rotor supports directional control. Infrared control keeps operation tailored to indoor use, where short distances and clear line of sight suit the system well. The included ready-to-fly model comes with an IR remote control system, a 3.7 V 150 mAh LiPo flight battery and a USB charger, so the core flying setup is already in place. An age marking of 8 years and up is stated in the product data. 4 AA batteries are required separately. LED position indicators can be switched on or off from the remote, which helps keep the model visible against indoor backgrounds during evening flights or in dimmer corners of a room. Short practice sessions, hovering drills above a clear floor area and careful turns through open living spaces all suit the compact format and the stated top speed of 10 km/h.

RC receivers and accessories

Switch Harness BEC(for MR-8)

only available from customer service

Carson switch cable BEC 500503072 is the ready-to-use connection cable for KO PROPO systems such as the MC-8 (500501040). It has a TAMIYA plug for 7.2V racing pack and a UNI/FUT receiver plug, 350 mm cable length, drilling distance 19 mm; switch 26×11×20 mm (15 without slider). Mounting with two M2 screws or double-sided adhesive tape.   Warning! Not suitable for children under 14 years.