Brands

RC lorries & RC trucks
1:26 MB Arocs Watertruck 100% RTR
500907665€69.99
Article number: 500907665 Product: 1:26 MB Arocs Watertruck 100% RTR Discover the 1:26 MB Arocs Water Transporter 100% RTR - the ultimate model for hours of fun outdoors! With LED front lighting, two speed settings and controllable sound via the radio, this transporter is a real highlight. The tank holds 120 ml of water, which can be dispensed manually via the pump. With a driving time of 60 minutes, a length of 407 mm, a width of 120 mm and a height of 145 mm as well as a weight of 671 g, the Transporter is an impressive model. Order now and experience the fun and joy that this water transporter brings! Included: Fully assembled model, 2.4GHz remote control unit, Li-Ion drive battery 3.7V / 600 mAh, USB charger, 2 x AA transmitter batteries, fuel bottle. WARNING! Please keep this information for any possible correspondence. Subject to technical change and change of color. Not suitable for children under three years. Choking hazard! Small parts may be swallowed! To be used under the direct supervision of an adult. Adult help is required to remove the securing devices.

Military aeroplane models
1:32 Lockheed F-35A Lighting II
510002506€109.99
Article number: 510002506 Product: 1:32 Lockheed F-35A Lighting II Model Dim.: 49,0 cm 100% NEW MOULD - SUPER DECALS SHEET FOR 6 VERSIONS - PHOTO ETCHED PARTS - COLOURED INSTRUCTION SHEET AND NEW STICKERS MASKS SHEET The JSF Joint Strike Fighter program was set up to develop a new fifth-generation all-weather multirole combat aircraft a ble to replace the existing United States and NATO strike-fighters. The aerospace industry team led by Lockheed Martin generated the single-seat, single-engine, F-35 Lightning II. It adopts stealth technology and it is characterized by the trapezoidal wings and by the use of the most advanced hi-tech materials and avionic systems. Developed to perform air superiority, close air support and ground attack missions, it has been design in different configurations. The F-35A is the conventional takeoff and landing variant, the F-35B is the short takeoff and vertical landing variant and the F-35C, with foldable-wings, has been developed to be used from conventional deck carriers. Thanks to its operational flexibility, the advanced on-board technology and the impressive project innovation, the F-35 lightning II will be a reference aircraft in the twenty-first century military aviation. Deatailed plastic kit of model Lockheed F-35A Lighting II in scale 1:32

Military aeroplane models
1:32 Macchi MC. 202
510002518€104.99
Article number: 510002518 Product: 1:32 Macchi MC. 202 The introduction of the Macchi MC 202 Folgore was a significant development for the fighter squadrons of the Italian Regia Aeronautica. Stylishly designed from an aerodynamical perspective, it was fitted with the powerful German DB 601 engine produced under license by the Italian aeronautical industry. The engine and overall aeronautical performance of the aircraft provided the Regia Aeronautica with a fighter capable of actively engaging Allied fighters. The flight performance compared to the previous generation of fighters equipped with radial engines, such as the Fiat G-50 and the Macchi Mc-200, was in fact much better. Manoeuvrable and fast (it was able to reach 600 km h), it was armed, in the early versions, with two 12.7 mm Breda-SAFAT machine guns installed in the nose. Only in later versions were the armaments improved with additional machine-guns installed in the wings. Detailed plastic kit in scale 1:32

Military aeroplane models
1:32 Macchi MC.205 Veltro
510002519€104.99
The Macchi M.C. 205 Veltro is considered the best Italian fighter of World War II. The evolution of the "Folgore" retained the excellent aeronautical design of its predecessor and was equipped, like other fighters of the "Series 5", with the German Daimler-Benz DB605 engine. The powerful V12 engine, also produced under license by Fiat, allowed the Veltro to reach a maximum speed of 640 km/h. Fast, maneuverable, and well-armed, with 2 × 12.7 mm machine guns in the nose and 2 × 20 mm cannons in the wings, it was capable of fighting on par with the best Allied fighters of the period, such as the American P-51 Mustang. It entered service with the Regia Aeronautica in the early months of 1943. After the armistice of September 8, it was used, until the end of the conflict, by both the flight units of the Italian Social Republic and those of the Co-Belligerent Air Force. Detailed Plastic Kit Warning! Not suitable for children under 14 years.

Military aeroplane models
1:32 Tornado GR.4
510002513€144.99
Article number: 510002513 Product: 1:32 Tornado GR.4 Model Dim.: 52,1 cm 100% New Moulds PE Sheet – Rubber tyres & fuselage covers Super Decals Sheet Size of the model 52,1 cm The "Tornado" arose from a collaborative project between Italy, Germany, and the United Kingdom to produce a multi-role high-performance combat aircraft. The primary requirement however was to develop a ‘state of the art’ modern aircraft able to perform low-altitude penetrating strike missions. This need was met by the development of a twin-engine combat aircraft with a variable-sweep wing. The Tornado GR.1 (Ground Attack/Reconnaissance) was the initial version adopted by Royal Air Force in early ‘80s. In 1996 the Tornado was upgraded to the Gr.4 standard which was characterized by improved operational capabilities, new avionics systems for navigation and the adoption of new ‘on-board’ technologies. These systems enabled the effective identification and tracking of targets and the weapons management of the newer generation of weapons such as Paveway IV bombs and Storm Shadow cruise missiles. Detailed plastic kit in scale 1:32

Military figures & accessories
1:35 "Chow Time"Ger.Anti-Tank Crew + PaK
540006697€30.99
Article number: 540006697 Product: 1:35 "Chow Time"Ger.Anti-Tank Crew + PaK We have carefully chosen a few items for production that share a common theme. With just these kits, modelers can create vignettes that vividly depict various scenarios on the battlefield: a marching grenadier team accompanied by a Jutland horse and Panzerschreck carts, a gun crew taking a break and enjoying a meal, a busy frontline communication center, and a Kettenkrad with a PaK 36/37 struggling forward with assistance from the crew. With this selection of carefully chosen items, modelers have the opportunity to bring the battlefield to life through intricate vignettes. Detailed Plastic Kit Warning! Not suitable for children under 14 years.

Model tanks
1:35 1/4 Ton 4x4 US Ambulance Vehicle
510000326€11.99
Article number: 510000326 Product: 1:35 1/4 Ton 4x4 US Ambulance Vehicle Model Dim.: 11,8 cm Decals for 2 versions The ubiquitous jeep is perhaps the most all-round vehicle ever constructed. Because it xas ruggedly built and thus able to traverse most types of terrain without suffering structural damage, one of the task assigned to the jeep was that of ambulance service.

Model tanks
1:35 15cm Panzerwerfer 42 auf SWS
510006562€31.99
Article number: 510006562 Product: 1:35 15cm Panzerwerfer 42 auf SWS Length of the model 198 mm NEW DECAL SHEET The Schwerer Wehrmachtschlepper (SWS) was developed as a medium half-track and used to transport supplies to front-line troops or as a towing vehicle for the light artillery. However, on the large rear flat load compartment some other applications have been developed. One modification was the Panzerwerfer 42 auf SWS, a 10 barreled 15 cm Nebelwerfer 42 rocket launched placed over an armored ammunition storage compartment. The rocket launcher, developed as device to create smoke screens, was soon used as real artillery able to launch high-explosive ammunitions. It could shoot the rocktes with impressive and deadly. Detailed Plastic Kit of model 15cm Panzerwerfer 42 auf SWS in scale 1:35

Military figures & accessories
1:35 20' Military Container
510006516€21.99
Article number: 510006516 Product: 1:35 20' Military Container Model Dim.: 17,4 cm 100% NEW MOULD Decals for 3 versions The 20-feet freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container – in terms of size, volumes and loading capacity – makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has became more effective and faster. Even the warehouses and stocking areas management became easier and more flexible.Thanks to its features and flexibility the 20-feet container has been adopted by several Armies to optimize the logistic and the ground support activities.