Brands

Carson

Carson 1:10 Mega Duster Bundle

Product bundle consisting of: 1:10 Mega Duster 3.0 2.4G 100% RTR / 7,4V/2600mAh LiION batt. FE-Line XHP/TAM   Article number: 500404292 Product: 1:10 Mega Duster 3.0 2.4G 100% RTR Powerful racer for off-road action: The Carson FE Mega Duster 3.0 doesn't stop at any terrain! The independent suspension, full suspension and extremely grippy high-grip off-road tires make the vehicle ideal for unpaved terrain. The Mega Duster is ready to run and equipped with 1x 2.4 GHz remote control system, 2x Li-Ion drive battery (7.4 V/1500 mAh), 1x USB charger, 4x LR06 / AA transmitter batteries and detailed instructions. Fully charged and at full capacity, a full 25 minutes of driving time is possible. The LED lighting, digitally proportional control and waterproof RC components complete the overall package and make the model appear not only high-quality but also easy to handle. Under ideal conditions, the vehicle can reach top speeds of up to 30 km/h. Included: Fully assembled model, 2.4 GHz RC system, LiIon powerpack 7,4 V / 1500 mAh, charger, transmitter batteries, manual.     Article number: 500608307 Product: 7,4V/2600mAh LiION batt. FE-Line XHP/TAM Experience Maximum Power with Our 2600 mAh Li-Ion Tuning Battery! With 7.4 volts of output and a Tamiya connector, it delivers extended run time and is the perfect choice for the FE line. Get the performance boost you’ve been looking for – now!  

RC buggys

1:16 Tenzu, RC car, 4WD 100% RTR

€79.99

The 1:16 Tenzu brings compact off-road running together with 4WD traction and fully proportional control in a 300 mm format built for fast, precise inputs. Front and rear LED lighting adds a clear visual signature while the chassis works across rough ground, loose sections and mixed surfaces. A 390 brushed motor pushes the model to up to 30 km/h, giving the lightweight 825 g layout the pace to feel lively without losing control. Ball bearings support efficient drivetrain operation, and the 2-channel 2.4 GHz radio system reaches up to 75 m for stable command during wider runs. The 110 mm height keeps the body low over the suspension, while the double wishbone layout helps the wheels track uneven terrain with controlled movement. The coarse-tread off-road tires are matched to outdoor running where grip changes from patch to patch. As a 100% RTR model, the set includes the 2.4 GHz remote control system, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA batteries. The age marking is 14 years and up. Open ground, gravel paths and compact dirt sections suit the Tenzu especially well, where its proportional control, 4WD layout and illuminated bodywork come into their own during evening laps.  Warning! Not suitable for children under 14 years.

Models & trailers

1:12 MB Unimog U300 THW, RC truck, 100% RTR

€199.99

The Unimog line became known for compact dimensions, portal-axle capability and utility work across rough terrain, and that character carries into this 1:12 MB Unimog U300 THW RC truck. In blue THW livery, the model combines a 450 mm body length with a powerful electric motor, front LED lighting and a 2.4 GHz control system for controlled driving on paths, gravel and other uneven ground. Its 220 mm width and 260 mm height give the truck a tall, purposeful stance that suits the U300 shape, while the 2052 g weight adds substance in motion. The remote control handles steering and throttle proportionally, so small stick inputs translate into finer changes than simple on or off control. A separate horn function can be triggered from the transmitter, and motor sound control adds another layer to the driving scene. The 7.4 V 850 mAh Li-Ion drive battery is included, and the RTR setup also includes the 2.4 GHz transmitter, a USB charger and transmitter batteries. That combination suits first runs in the hobby as well as relaxed utility-style driving sessions with a scale vehicle theme. On compacted dirt, paving or loose gravel, the THW truck can be guided through tighter turns, short climbs and stop-start route changes while the illuminated front end keeps the model visually defined.

RC truggies & RC monster trucks

1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR

€124.99

The 1:10 Mega Duster 3.0 brings pick-up truck styling, LED lighting and a fully assembled RTR setup into a 430 mm off-road RC car built for rough ground. With independent suspension, coilover shocks and a fully suspended layout, the chassis is set up to absorb uneven surfaces while the multi-coloured printed body keeps the truck's desert-racer look clear in motion. Its 2.4 GHz radio system uses digital proportional control, so steering and throttle inputs can be fed in with fine adjustment rather than simple on-off commands. The included Li-Ion drive battery is rated at 7.4 V and 1500 mAh, and the USB charger is part of the set, along with 4 AA transmitter batteries. At 310 mm wide and 200 mm high, the truck carries a broad monster-truck footprint, while the stated weight of 1364 g supports a planted feel over gravel and dirt. Splash-proof electronics expand the running window when the surface is dusty or damp, and the stated driving time reaches up to 25 minutes. The Mega Duster 3.0 suits open ground, compacted trails and loose stone where the 115 mm all-terrain tires can work for grip and control. Age 14+ is stated for this model, and the fully assembled format gets the focus quickly onto driving lines, throttle control and off-road handling rather than workshop time.  Warning! Not suitable for children under 14 years.

RC speed boats

RC Yacht Hurikan, RC boat, 2.4 GHz RTR

€39.99

The Hurikan brings yacht styling and fast RC handling together in a compact 350 x 95 x 105 mm format built for lively water runs. Sand tones, white surfaces and dark window graphics give the hull a sharp, modern look, while the 2.4 GHz radio system keeps steering input responsive during laps across the lake. At 270 g, the model stays light in the hand for carrying to the shoreline, yet its twin-prop drive gives the boat the thrust needed for brisk acceleration on the water. Full driving functions cover forward, backward, left and right control, making tight turns and quick corrections easy to manage. The set includes a ready-to-run model, a 2.4 GHz remote control system, a USB charger, 2 x LR06 AA transmitter batteries and 2 spare propellers. The included 3.7 V 1200 mAh Li-Ion battery powers sessions of up to 40 minutes, and the drive engages only in water through the integrated shut-off circuit. That combination suits calm-lake outings, pond sessions and repeated practice runs where clean response matters as much as speed. Age 8+ marks the recommended age, and the complete RTR setup keeps the focus on steering lines, throttle control and fast passes across open water.

RC buggys

1:8 Drakuro BL 3S, RC car, 4WD RTR

€299.99

The 1:8 Drakuro BL 3S RTR brings brushless power, long-travel suspension and a wide 370 mm stance into one large-scale RC car built for fast off-road running. At 500 mm long, 330 mm high and 3402 g in weight, the chassis carries real presence on dirt tracks, gravel stretches and open ground, with a top speed of up to 65 km/h. A longitudinal aluminum reinforcement brace adds rigidity through the centre of the chassis, and reinforced steel drive shafts at the front and rear transfer power under load. The waterproof 30 kg steering servo uses metal gears for direct steering input, while splash-proof electronics and housing support running in changing conditions. Height-adjustable body mounts make it easier to set the shell position cleanly over the chassis, and LED lighting at the front, rear and roof keeps the model clearly defined when the light drops. The XT90 high-current connector system is designed for low-loss power transmission within the drive setup. The ready-to-run package includes a 2.4 GHz remote control and instructions, so the focus stays on driving rather than sourcing the core control gear. With 14 Years marked in the data, the Drakuro suits high-speed bashing sessions, repeated acceleration runs and broad off-road lines where suspension travel, steering force and chassis size all come into play.  Warning! Not suitable for children under 14 years.

RC yachts

Bella Luisa 2.4G, RC boat, 100% RTR

€69.99

Classic runabout styling meets radio-controlled action in the Bella Luisa 2.4G 100% RTR. The 455 mm motorboat combines a glossy wood-look finish, a clear curved windshield and chrome-look deck details with full steering control, creating a striking presence on ponds and small lakes. The hull measures 455 x 105 x 140 mm and weighs 648 g, giving the boat a slim, low profile on the water. Inside the set are a 2.4 GHz transmitter, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA transmitter batteries, so the model is fully assembled and ready for operation. The propeller drive reaches up to 10 km/h, while the water-activated motor start means the propeller engages only when the boat is on the surface. The detailed fairing and driver's cabin shape add to the leisure-boat look, and the cockpit area offers space for a play figure. On a calm garden pond, the responsive left-right and forward-reverse controls support neat manoeuvres along the bank or broad passes across open water. A driving time of up to 25 minutes leaves room for longer sessions before the battery returns to the USB charger.

RC speed boats

RC Fire Boat 2.4G, RC boat, 100% RTR

€119.99

The RC Fire Boat 2.4G 100% RTR brings firefighting action onto the water with a remotely operated water cannon, LED position lights and a sporty rescue-boat look. At 560 mm long, 147 mm wide and 215 mm high, the hull has a strong on-water presence, while the 2.4 GHz radio system keeps control stable across distances up to 100 m. The fully assembled boat is supplied as a ready-to-run set with a 7.2 V 1000 mAh NiMH drive battery, USB charger, 2.4 GHz remote control and 2 x AA transmitter batteries. Full driving functions cover forwards, backwards, left and right, so manoeuvres can be varied between straight sprints, tight turns and controlled repositioning for water-cannon play. A driving time of 45 minutes supports longer sessions before recharging, and the boat weight of 717 g keeps the format easy to handle between shore and water. Whether used on a pond, at the lakeside or on calm stretches of water, the fireboat combines radio-controlled driving with an extra action feature that changes how each run unfolds. Age 8 years+ marks the recommended age, and the included screwdriver supports the setup of the supplied components before the next launch.

RC aircraft

Stinger 2.0 2.4GHz 100% RTF, RC airplane

€49.99

The Stinger 2.0 2.4GHz 100% RTF brings a light 29 g airframe, intelligent gyro electronics and a ready-to-fly setup into one compact RC airplane built for controlled first flights and relaxed repeat sessions. With a length of 315 mm and a width of 385 mm, the model carries a broad wing layout that gives the aircraft a clear presence in the air while keeping the format easy to transport to open flying spaces. The Flexipor construction keeps weight low and supports the light handling that suits this class, while the 2.4 GHz control system allows clean command input without cable setup. A 3.7 V 300 mAh LiPo battery powers the airplane, and charging runs through the included USB charger. Spare rotor blades are included for continued use after routine wear, and the included 2x AA batteries complete the transmitter power supply. The gyro system works with the control inputs to calm the model in flight, which helps maintain a steadier line during climbs, gentle turns and landing approaches. Open ground, a sports field or another suitable flying area gives the 385 mm wingspan room to work through smooth passes and repeated take-offs. The ready-to-fly format keeps preparation focused on charging, switching on and heading into the next 20-minute flying session.

RC cars

1:10 Dustor, RC car, 2.4 GHz 100% RTR

€69.99

The 1:10 Dustor brings full-size RC presence to first runs and casual off-road sessions, with a 540 mm length, 300 mm width and 240 mm height that give the model a broad, planted stance on mixed surfaces. A brushed motor drives the 2WD rear-wheel-drive layout to speeds of up to 20 km/h, while the 2.4 GHz radio system reaches up to 75 m for clear control across open ground. Its fully assembled format keeps the focus on driving, and the included 7.4 V 500 mAh Li-Ion battery works with the USB charger for straightforward turnaround between sessions. At 985 g, the chassis stays light enough for responsive direction changes while still carrying the visual weight expected from a 1:10 off-road model. Front and rear impact protection support everyday running where gravel edges, kerbs and clipped markers are part of the route. The included transmitter is powered by 2 x LR06 AA batteries, so the full set is prepared for use without extra radio equipment. On asphalt, compacted paths or light terrain, the combination of suspension travel, rear-drive handling and off-road tires creates a controlled, approachable driving character. With up to 30 minutes of running time per charge, the Dustor suits park runs, open-yard driving and repeated practice laps where longer sessions matter.

RC cars

1:32 Deemon X, RC buggy, 100% RTR 2WD

€29.99

Compact scale and lively handling give the 1:32 Deemon X the feel of a true off-road RC buggy in a format built for quick runs at home or on small garden tracks. The 2WD layout, 2.4 GHz remote control system and selectable speed levels create a clear, responsive driving setup, while the elaborately printed body shell and switchable LED lighting keep the model visually sharp in motion. At 115 mm long, 86 mm wide and 53 mm high, the buggy fits neatly into tabletop courses, improvised obstacle lines and tighter turns where larger vehicles need more room. The 3.7 V 100 mAh LiPo drive battery supports up to 15 minutes of driving time, and recharging happens via the included USB charger. Included pylons and the jump ramp add concrete course elements for slalom sections, launch points and repeatable stunt practice rather than simple straight-line driving. The 69 g weight keeps the model nimble when changing direction, and the rubber tires give the chassis the grip needed for uneven surfaces. Short sessions on indoor floors, hallway tracks or paved garden paths suit the Deemon X especially well, whether the focus is clean cornering, quick acceleration bursts or ramp jumps. With 2 speed settings and a complete RTR package, the buggy moves easily between first RC laps and fast, compact course driving

RC helicopters

Eagle 280 Crash Stop, RC helicopter, 2.4G RTF

€44.99

The Eagle 280 Crash Stop brings compact RC helicopter flying together with a front crash-stop sensor that reacts to obstacles by stopping and backing the model away. At 200 mm long, 280 mm wide and 125 mm high, this 56 g coaxial helicopter suits controlled flights in tighter spaces as well as calm outdoor use. The 2.4 GHz control system gives the model its dedicated radio link, while the emergency stop button on the transmitter adds a direct way to cut the action when needed. A 3.7 V 250 mAh LiPo flight battery powers flights of up to 7 minutes, and the model reaches speeds of up to 25 km/h. The aluminium chassis gives the structure a firm core, and the coaxial rotor arrangement supports balanced lift for measured handling. Spare rotor blades are included, so the set is equipped for continued running after routine contact or wear. Indoor flights near walls, hallways or furniture benefit from the forward obstacle response, while open areas allow short hovering runs, lift-offs and landings with the same compact airframe. The ready-to-fly package includes the helicopter, remote control system, USB charger and transmitter batteries, so the set is prepared for flight after the first charging process.

RC truggies & RC monster trucks

1:12 NemeSys, RC car, 2.4 GHz 100% RTR

€129.99

The 1:12 NemeSys brings compact dimensions, 4WD traction and a lively off-road setup into one ready-to-run RC car. At 334 mm long, 233 mm wide and 140 mm high, the chassis combines a manageable footprint with the stance needed for rough ground, while the 2.4 GHz radio control keeps handling interference-free during each run. A 7.4 V Li-Ion drive battery with 1300 mAh supplies the Type 390 motor, and the aluminium heat sink supports the drive system when the pace rises. The model reaches up to 35 km/h and weighs 1020 g, giving the suspension and tyre setup a planted feel over changing surfaces. Adjustable aluminium shock absorbers let the running gear respond to ruts, gravel and uneven tracks, and the treaded tyres add bite where smooth rubber would lose grip. Integrated LED lighting on the bumper and roof adds a clear visual reference when the light drops, and the wheelie function brings an extra burst of character under strong acceleration. Splash-proof components support running sessions on dusty paths and damp ground, extending the range of places where the NemeSys can be driven. Driving time reaches 30 minutes. The set includes the fully assembled model, a 2.4 GHz remote control, a drive battery, a USB charger and 3 transmitter batteries, so the first outing can start with the supplied running gear and radio equipment.  Warning! Not suitable for children under 14 years.

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage, RC car

€17.99

The Aston Martin V12 Vantage brings British sports car character into a 1:60 Nano Racer format, combining licensed body styling with compact RC handling. At 79 mm long, 33 mm wide and 22 mm high, the black coupe keeps a low, planted look that suits short sprints across tables, smooth floors and small driving spaces. Its 2.4 GHz radio system gives the model a dependable link to the controller across 15 m, and the layout also allows up to 50 vehicles to run at the same time. That makes the small scale especially lively in group sessions, where several cars can share the same area without constant frequency conflicts. The ready-to-run setup keeps the focus on driving, while the included 1.2 V 80 mAh NiMH drive battery matches the compact chassis and the 25 g weight for quick, light movement. Charging runs directly through the remote control unit, so the car and controller work as one neat driving system. With a maximum driving time of 10 minutes, the Nano Racer suits short races, repeat laps and quick head-to-head runs. Age 4+ is stated in the product data. The included screwdriver supports battery access as part of the set contents, and the compact format makes the model easy to store between sessions.

RC models in 1:87 scale

1:87 MB 1620 Tarp Truck, RC truck, 100% RTR

€139.99

The 1:87 MB 1620 Tarp Truck with trailer brings moving road traffic into H0 railway scenes with compact dimensions of 187 x 28 x 38 mm and fully assembled 100% RTR equipment. Official Mercedes-Benz Trucks licensing, fine printwork and the blue finish give this RC truck a recognisable presence beside stations, freight depots and urban track sections. Its 2.4 GHz radio system supports interference-free control and allows several models to run at the same time, which suits busy diorama setups with more than one active vehicle. The very small turning radius helps the truck work through narrow streets, loading areas and switching zones where larger RC formats would look out of scale. The trailer extends the road-train silhouette and the removable tarp changes the look of the load area for different scene concepts. Included in the set are the ready-to-drive model, 2.4 GHz remote control system, Li-Ion drive battery 3.7 V / 75 mAh, 4 transmitter batteries LR03 / AAA, and instructions. On a layout, the truck can roll alongside trains, serve as a delivery vehicle near a goods shed or move through a city section with controlled speed changes and steering inputs. Collectors can also place it as a static display piece, with the integrated driver figure and licensed cab details carrying the scale effect even when the model is parked.

RC helicopters

Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF

€29.99

The Easy Tyrann 200 Boost IR brings compact indoor helicopter flying into a 100% RTF format with a 240 mm body, 200 mm rotor diameter and a 3-channel infrared control system. Its gyro-supported flight stabiliser helps keep the model composed in the air, while the switchable boost function adds an extra burst of power when the pace needs to change. A 3.7 V LiPo flight battery with 250 mAh capacity powers flight times of up to 9 minutes, and charging runs through the included USB charger. The transmitter also controls the color changing LED, so the light effect can be switched during flight rather than staying fixed. With a top speed of 15 km/h and a flight weight of 31 g, the helicopter stays light enough for controlled indoor use while still delivering lively movement. The ready-to-fly set includes the model, IR remote control system, LiPo flight battery, USB charger, 3x LR06/AAA transmitter batteries and spare rotor blades. Short hovering runs in a living room, careful turns along a hallway or repeated take-offs and landings on a smooth floor all suit the compact format. Age 8 Years+

RC tractors

1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer

€99.99

The DEUTZ-FAHR 8280 TTV brings the look of a modern farm tractor into 1:16 scale with a matching trailer, 2.4 GHz radio control and working sound functions. Engine sound, horn and LED front lighting create a more lifelike driving scene, whether the tractor is rolling across loose soil, garden paths or a carefully arranged display setup. At 750 mm long, 180 mm wide and 234 mm high, the model has a substantial footprint that suits towing and transport play. The rigid axle supports off-road running, while the steering is tuned for precise control and a small turning radius, helping the tractor change direction cleanly and guide the trailer through tighter spaces. The officially licensed DEUTZ-FAHR styling carries the 8280 TTV identity into the bodywork, giving the model a recognisable agricultural character. The accessible battery compartment under the hood allows quick battery changes between runs. Included are the ready-to-run tractor with trailer, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR03 AAA transmitter batteries. With a weight of 1731 g and a driving time of 90 minutes, the set is equipped for extended driving sessions focused on towing, positioning and farm-style transport action.

RC truggies & RC monster trucks

1:10 Torque Beast, RC car, 2.4 GHz RTR

€129.99

The 1:10 Torque Beast brings classic monster truck presence to RC driving with a 430 mm length, 310 mm width and 200 mm height that give the chassis a broad, purposeful footprint on rough ground. A solid bumper with integrated LED lighting adds a bright front-end detail, while water-resistant RC components and splash-proof electronics support running when the surface turns damp or dusty. At 1364 g, the model combines its size with a manageable overall weight that suits quick direction changes and repeated runs. The 7.4 V 1500 mAh Li-Ion drive battery is included, and the stated running time reaches 25 minutes before the pack heads back to the USB charger. The fully assembled RTR format keeps the focus on driving rather than setup, and the 2.4 GHz system supports stable control without the frequency crystals older RC systems required. Minimum age: 14 years. On gravel paths, compact dirt sections or uneven yard surfaces, the Torque Beast has the ground clearance and tire format to keep the run lively without losing control. Evening sessions gain extra character from the front LED lighting, and the included battery set means the truck is equipped for the first outing straight away.

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage RC car

€17.99

The Aston Martin V12 Vantage brings a well-known British sports car shape into a compact 1:60 Nano Racer format with radio control and a red body that stands out clearly on small driving layouts. Its officially licensed appearance follows the full-size model closely, while the 79 mm length, 33 mm width and 22 mm height keep the car suited to short straights, table-edge turns and quick direction changes in limited space. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The controller works on 2.4 GHz and reaches up to 15 m, giving the car enough room for indoor laps and compact obstacle courses. The same control system allows up to 50 vehicles to run simultaneously, which opens the door to group sessions without frequency clashes. With a weight of 25 g, the small chassis stays easy to handle between runs, and the battery delivers up to 10 minutes of driving time per charge. On a living room floor, a desk track or a small race setup, the Nano Racer format turns narrow spaces into usable circuits. Short driving sessions, quick charging through the controller and the compact footprint make this RC car a neat choice for spontaneous races, collecting and casual practice runs.

Mini RC cars

1:60 Nano Racer Fo.Must.Shelby GT500, RC car

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle-car presence, and this 1:60 Nano Racer translates that character into a compact RC format. With its licensed Ford design, red bodywork and stripe detailing, the small car brings a recognisable road-car silhouette to quick indoor driving sessions. The 2.4 GHz control system sends steering and throttle inputs over a range of 15 m, and it allows up to 50 vehicles to run simultaneously on the same frequency environment. Charging takes place through the remote control unit, which includes the charging connection for the 1.2 V 80 mAh NiMH drive battery. A full charge delivers up to 10 minutes of driving time. The ready-to-run format means the model, remote control with charging connection, NiMH drive battery, screwdriver and instructions are included. With dimensions of 79 x 33 x 22 mm and a weight of 25 g, the Nano Racer fits naturally into compact race setups where short straights, quick direction changes and close duels matter more than sheer size. The small scale also makes it easy to line up several cars for simultaneous runs, turning a table, hallway or smooth floor into a miniature racing scene with very little space required.

Mini RC cars

1:60 Nano Racer Fo.Must.ShelbyGT500, RC car

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle car presence, and this 1:60 Nano Racer translates that character into a compact RC format. At 79 mm long, 33 mm wide and 22 mm high, the miniature car stays small enough for quick driving sessions on tables, smooth floors or improvised indoor courses while still carrying the licensed Ford look. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The 2.4 GHz radio system gives the car responsive control and allows up to 50 vehicles to run simultaneously, which suits group races without frequency clashes. A 15 m control range leaves room for short sprints, turns and head-to-head runs, while the 25 g weight keeps the handling light and agile. The remote control also serves as the charging point, so the battery can be charged directly through the controller. With up to 10 minutes driving time, the Nano Racer fits quick race breaks, compact home circuits and repeated short sessions where several cars share the same space. The small footprint and simple control layout also make it easy to set up spontaneous races whenever a smooth surface is available.

RC models in 1:87 scale

1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz

€129.99

The Mercedes-Benz O 302 shaped coach travel across Europe for years, and this 1:87 RC bus brings that familiar silhouette into moving H0 scenes with licensed bodywork, raspberry red paintwork and front and rear LED lighting. At 112 mm long, 36 mm wide and 51 g in weight, the model sits naturally among buildings, platforms and road sections without overpowering the layout. Its 2WD rear-wheel drive works with a 2.4 GHz 3-channel radio system for controlled movement at up to 50 m, while the compact format helps the bus thread through tighter streets and station areas. The integrated 3.7 V Li-Ion battery with 75 mAh is built into the model, keeping the setup clean and the proportions true to scale. As a 100% RTR version, the set includes the remote control, the lithium drive battery, 4x AAA batteries, instructions and a storage case. The licensed Mercedes-Benz O 302 DB format gives the bus a recognisable road-going character that suits realistic transport scenes. On a model railway layout, the bus can roll between station forecourts, depot roads and town routes, adding controlled movement where static vehicles would otherwise remain fixed. The compact H0 scale format also suits shelf presentation between driving sessions, with the lighting and paintwork carrying the look of a classic DB bus into close-up display settings.

RC speed boats

Sea Ray 2.4 GHz, RC boat, 100% RTR

€54.99

The Sea Ray 2.4 GHz brings twin 380 brushed motors, a streamlined hull and RTR convenience together in a compact RC boat built for fast action on the water. At 395 mm long, 190 mm wide and 100 mm high, it cuts a neat profile across ponds and calm lakes, with LED lighting adding a clear visual accent as the hull moves through changing light. The fully assembled format keeps the focus on driving rather than setup, and the included 7.4 V 600 mAh Li-Ion battery supports up to 20 minutes of running time per charge. A charging time of 3 hours keeps the routine straightforward between sessions. The 2.4 GHz radio system is designed for 1 player control, while the water-protected receiver and battery box help keep key electronics covered from spray. A built-in shut-off means the motors only run in water, matching the boat's intended use with a clear functional safeguard. Its lightweight 349 g build makes carrying the model from bag to bank easy, and the compact shape sits comfortably in hand at launch and recovery. With 2 AA transmitter batteries included, the set is ready for immediate use in suitable water conditions, whether the plan is short speed runs, repeated passes along the shoreline or relaxed practice with steering and throttle control.

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 100% RTR 4WD

€199.99

The 1:10 XS Tekuro brings a fast off-road setup into a ready-to-run format, combining permanent 4WD, a high-torque 550 brushed motor and up to 40 km/h for lively runs across dirt, gravel and rough ground. At 410 mm long, 300 mm wide and 175 mm high, the chassis carries a broad monster-truck stance that suits uneven terrain and quick direction changes. Completely mounted on ball bearings, the drivetrain is built to reduce drag through the transmission, while metal differentials at the front and rear use steel bevel gears for direct power transfer under load. The XT60 high-voltage battery plug-in system supports a secure connection for the included 7.4 V 2600 mAh Li-Ion battery pack, and the quick-change battery holder keeps swaps straightforward between sessions. Weight comes in at 1741 g, giving the chassis enough mass to stay settled as the suspension works through bumps. The rear bumper integrates a wheelie bar that supports controlled lift when the motor loads up hard from a standing start. The scope of delivery includes the 100% RTR model, 2.4 GHz remote control system, 2600 mAh 7.4 V drive battery, 1 A USB charger, 4 LR06 AA transmitter batteries and a manual. Driving time is about 15 minutes, making the XS Tekuro a strong fit for park runs, compact off-road tracks and loose-surface sessions where quick setup and solid traction matter.  Warning! Not suitable for children under 14 years.

RC diggers

1:16 Volvo EC 160E, RC excavator, 100% RTR

€199.99

The Volvo EC 160E brings excavator handling into 1:16 scale with a ready-to-run RC setup, a true-to-original driver's cab and a working crawler layout built around 2 separately driven chains. With an operating weight of 2354 g and dimensions of 252 x 168 x 180 mm, the model carries a substantial presence while remaining manageable for controlled indoor driving and digging sessions. Its function package focuses on coordinated arm work rather than simple forward travel. The lifting arm and stick are made of plastic, and the spindle drive system moves the lifting arm, stick and bucket through deliberate, mechanical action that suits loading, lifting and placement tasks. The 2.4 GHz radio system supports single-user control, and the maximum operating time of up to 190 minutes allows longer work cycles before recharging. The included sheet metal shovel, scrap grab and excavator chisel shift the machine from earthmoving to gripping and breaking scenarios without changing the core vehicle. On a floor-based building site layout, the excavator can turn the uppercarriage through 360° to pick up, swing and place material within a compact work zone. The RTR package includes the model, remote control system, 7.4 V 1200 mAh Li-Ion drive battery, 3 LR06/AA transmitter batteries and instructions.  Warning! Not suitable for children under 14 years.

RC cars

1:24 Lamborghini Sian, RC car, 2.4GHz RTR

€24.99

The Lamborghini Sian brings super sports car styling into a compact 1:24 RC format, pairing a low, sharply shaped body with radio-controlled handling and a full ready-to-run setup. With a length of 195 mm, a width of 80 mm and a height of 49 mm, the model carries its proportions in a size that suits quick laps across smooth indoor surfaces. The 2.4 GHz remote control system supports stable command input during solo driving, while the 3.7 V Li-Ion drive battery with 500 mAh powers up to 60 minutes of ride time. At 172 g, the car stays light in hand and easy to place on the floor between runs. The included USB charger keeps the charging routine simple, and the set also contains 2 LR03 AAA transmitter batteries. A rear axle differential adds a mechanical detail that supports smoother cornering behaviour, while steering fine adjustment helps tune the driving line to the available space. LED lights at the front and rear keep the bodywork visible when the room gets darker and add extra presence during evening driving sessions. On a hallway course, around furniture legs or across a cleared living-room track, the compact dimensions, quick responses and detailed Lamborghini look create a focused RC session with a clear sports car character.

RC cars

1:24 Lamborghini Veneno, RC car, 100% RTR

€24.99

The Lamborghini Veneno brought extreme supercar styling to the road, and this 1:24 RC version carries that same low, angular character into compact driving sessions. As a fully assembled ready-to-run RC car, it combines a 2.4 GHz control system with a 195 mm body, 80 mm width and 49 mm height for quick laps across smooth indoor surfaces. The included Li-Ion drive battery delivers up to 60 minutes of driving time at full capacity, and the USB charger keeps the setup straightforward between runs. At 172 g, the model stays light in hand and responsive in motion, while the pistol-grip transmitter uses a steering wheel control and trigger throttle for familiar RC handling. Front and rear LED lights sharpen the car's presence when the room gets darker, and the underside trim dial marked for left and right steering correction helps align the tracking when the car pulls off line. The non-slip rubber tires support controlled acceleration and cleaner corner entry on short home circuits. Age 6 years and up is stated for the model. On a hallway course, around furniture or across a start-finish line marked out at home, the compact scale and agile response keep each run focused on timing, steering input and repeatable lines rather than sheer size.

Mini RC cars

1:32 VW Beetle Rally, RC car, 2.4 GHz RTR

The Volkswagen Beetle became one of the most recognisable car shapes ever built, and this 1:32 VW Beetle Rally translates that silhouette into a compact RC car with a rally-inspired stance. At 135 mm long, 85 mm wide and 85 mm high, the ready-to-run model combines agile handling with a size that suits quick driving sessions on smaller courses, tabletops or smooth ground. The 2.4 GHz radio system gives the car its control link, while the 273 g weight keeps the model light enough for nimble direction changes. The included remote control, drive battery and USB charger mean the main running components are already in the set, so the focus stays on driving rather than extra setup. A 3.7 V Li-Ion drive battery powers the car for up to 60 minutes of runtime, supporting longer sessions before the next charge. The Volkswagen licence adds the named vehicle identity from the original subject to the rally-themed body. Red LED underbody lighting stands out especially well in dimmer indoor spaces, where the glow adds movement and presence as the Beetle changes direction. Treaded tires help the car hold its line on mixed surfaces, making short sprints, looping turns and obstacle runs feel active and controlled. Age 6+

RC buggys

1:8 Akuma Buggy, RC car, 4WD RTR pink

€399.99

The 1:8 Akuma Buggy brings 4WD traction, brushless power and a bold pink body shell into a ready-to-run off-road setup built for fast runs on dirt, gravel and uneven ground. With a length of 505 mm, a width of 365 mm, a height of 220 mm and a weight of 3909 g, the chassis carries the broad stance and substantial footprint that suit buggy driving beyond smooth surfaces. A 100A drag-style ESC for 4S operation works with the 2050 Kv 3-pole brushless motor, while the cooling fan and aluminum motor heatsink support the electronics during hard acceleration. Steering input is handled by a 20 kg waterproof servo with metal gears, and the adjustable aluminum steering plate adds another tuning point at the front end. The XT90 high-current connector system and quick-change battery mount with Velcro strap keep battery swaps straightforward between runs. Splash-proof electronics and a 3-position adjustable rear spoiler round out a layout aimed at outdoor use. The included Expert Charger Twin LiPo USB-C charges two 7.4 V LiPo batteries simultaneously at 2A each, matching the supplied 2 x 7.4 V 3800 mAh drive packs. A 10 minute ride time suits short, fast sessions on compact tracks, open gravel areas or backyard jumps, with the color-printed body keeping the Akuma look clear at speed. Age 14+  Warning! Not suitable for children under 14 years.

RC buggys

1:8 Drakuro BL 3S 4WD RTR, RC car

€299.99

The 1:8 Drakuro BL 3S 4WD RTR brings brushless power, long-travel suspension, and a wide off-road stance into a ready-to-run RC car built for fast runs across mixed terrain. With a length of 500 mm, width of 370 mm, height of 330 mm, and weight of 3402 g, the chassis carries the planted footprint needed for high-speed driving and rough-surface control. A waterproof 30 kg steering servo with metal gears gives the front axle the force needed for direct steering inputs, while splash-proof electronics and housing support running where dust, spray, and loose dirt are part of the session. Steel differentials at the front and rear distribute drive through the drivetrain, and height-adjustable body mounts allow the shell position to be matched to the setup. The XT90 high-current connector system is designed for low-loss power transmission, supporting the demands of the brushless drive package under load. LED lighting at the front, rear, and roof keeps the body easy to track as conditions darken, and the rear bumper integrates a wheelie bar for hard launches under strong acceleration. The ready-to-run set includes a 2.4 GHz remote control and instructions. 14 Years marks the recommended age.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B 200/8, RC car, 100% RTR trailer

€114.99

The Mercedes-Benz /8 series shaped everyday road traffic in the late 1960s and 1970s, and this 1:87 M-B 200/8 captures that classic saloon presence in a compact RC format. The green body and matching trailer combine a recognisable road-car silhouette with radio-controlled movement, creating a small-scale setup that carries both collector appeal and active driving use. Its 1:87 scale makes the model easy to place on a desk, shelf, or layout, while the trailer adds a second element that changes the overall scene and gives the combination a more complete towing look. The 100% RTR specification means the driving package is prepared for immediate use, and 5 included batteries cover the initial power requirement stated in the data. With a minimum age marking of 14 years, the model sits in a hobby-focused range rather than a preschool toy segment. The compact format also suits short driving sessions where a larger RC vehicle would need more floor space. Whether used for careful indoor manoeuvres, as a small addition to a model collection, or as a road-car counterpart within a miniature vehicle lineup, the M-B 200/8 with trailer brings motion into a classic passenger-car theme. The combination of saloon and trailer gives the setup a distinct identity both at rest and in operation.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B Unimog U406, RC fire engine, RTR

€109.99

The Mercedes-Benz Unimog U406 has long been known for compact utility and all-terrain presence, and this 1:87 RC fire engine translates that character into a format built for close-quarters driving. Fine printing, high-quality paintwork and front and rear LED lighting give the body a convincing emergency-service appearance, while the very small turning circle suits narrow routes between scenery, tools or display pieces. The chassis uses 2WD rear-wheel drive and a brushed motor for controlled running, with fully proportional steering and acceleration allowing measured inputs instead of simple on-off commands. That control layout makes a visible difference on a desk, in a diorama or anywhere space is limited, because the model can be guided through tighter lines with cleaner corrections. The 2.4 GHz system supports stable operation, and the permanently installed 3.7 V 75 mAh Li-ion drive battery keeps the compact body free from bulky battery changes. Charging takes place via the transmitter and takes around 30 minutes. As a 100% RTR version, the set arrives with the remote control, the drive battery and the batteries required for the transmitter. Up to 60 minutes of driving time supports longer indoor sessions, whether the model is weaving through a small layout, tracing service routes across a tabletop or adding movement to a scale scene.

Military figures & accessories

Italeri Walls and Ruins Model Kit 1:72 Scale

€9.49

Italeri Walls and Ruins brings damaged architecture into a 1:72 model scene with ruined wall sections, rubble details and accessory parts that shape a convincing World War II setting. The assembly kit uses polystyrene components with moulded masonry surfaces, broken edges and openings that give the finished structure a worn, battle-marked look. Large wall pieces, lower broken panels and separate debris sections allow different layouts across a base, so the same set can frame a street corner, a shattered defensive line or the remains of a larger building. Sandbag elements introduce another layer of scene building, adding cover positions and visual contrast beside the stonework. Exposed brick textures and damaged contours create depth that stands out once painted and weathered. The 1:72 scale fits naturally with military miniatures, vehicles and historical displays built to the same proportion. On the workbench, the 600-minute assembly time supports a slower build with room for test fitting, painting stages and final placement of rubble and barricade details. In a finished diorama, the ruined sections can anchor a battlefield vignette, surround an armoured vehicle, or define the backdrop for infantry figures in a compact World War II display.

RC cars

Magic Machine 2.0, RC car, 2.4 GHz RTR

€49.99

The Magic Machine 2.0 brings a striking twist to RC driving with a body that changes function at the touch of a button. In one moment it runs as a flat racer, and in the next it shifts into an off-road configuration with more ground clearance, creating a fast change of character on asphalt, ramps and rougher sections. Its layout combines separately steered front and rear units with all-wheel drive, so both axles work together as the vehicle changes direction. That unusual steering concept gives the model its own driving feel and supports quick reactions when obstacles appear in the path. The body design also allows the machine to flip backward over obstacles, continue driving on its back and right itself again to keep moving. LED lighting adds another visible detail during use, while the contrasting top and bottom styling makes each rollover part of the visual effect rather than a stop in the action. With a length of 340 mm, a width of 215 mm and a height of 123 mm, the model has a compact footprint matched by a weight of 570 g. The included Li-Ion drive battery delivers up to 25 minutes of driving time and is paired with a USB charger. A 2.4 GHz remote control in a game controller style is included, along with 2 AA transmitter batteries, so the ready-to-run set is equipped for immediate use after charging.

RC yachts

Nano Racer Yacht 2.4G

€19.99

RC action on the water! With the Nano Racer Yacht, luxury RC fun on the water is realized. The ready-to-run yacht model delivers full driving fun right after unpacking and brief charging. It is controlled with a 2.4 GHz radio remote control and offers a range of up to 40 meters. Thanks to the safety shutdown, the propellers only work when the model is in contact with water. All RC components are water-resistant, making the yacht ideal for exciting action on the water. The set includes a LiPo battery and clear instructions for quick start-up. Compact, fast, and easy to control, the Nano Racer Yacht is a fun watercraft for hobby and play.

RC speed boats

XS Deep Sea Dragon, RC submarine, 100%RTR

€39.99

Compact RC submarines bring a different kind of model action, and the XS Deep Sea Dragon shifts that action below the surface. This 100%RTR RC submarine combines a compact orange hull, 3-channel 40 MHz control and blue LED illumination for visible manoeuvres in baths, pools and aquaria. The set includes the mini submarine with RC system, a 3.7 V 90 mAh Li-Ion drive battery, a USB charger, 2 transmitter batteries and instructions. Forward, backward, left and right steering are joined by dive and surface functions, so movement is not limited to a flat path across the water. The blue LEDs stay visible during operation and help keep the model in view while it changes depth. With up to 6 minutes of runtime, each charge suits short underwater runs with a clear start and finish. The USB charging cable can be stowed in the transmitter, so the charging lead stays with the control set between sessions. In use, the compact format suits smaller water spaces where tight turns and depth changes stay easy to follow. Age 8+ marks the recommended age. The submarine is intended for fresh water use in swimming pools, baths and aquaria; do not use in salt water.

RC truggies & RC monster trucks

1:10 Bokusa BL 2S 4WD RTR, RC car, yellow

€219.99

The 1:10 Bokusa BL 2S 4WD RTR brings brushless power and monster truck stance into a ready-to-run RC car built for fast off-road sessions. Its 455 x 312 x 180 mm format and 2165 g weight give the chassis a planted footprint, while the yellow body adds a bold trackside look. A 30 kg waterproof steering servo with metal gears handles steering input with firm control, and the fully ball bearing mounted transmission supports efficient running across the drivetrain. Metal differentials at the front and rear use steel bevel gears, adding a solid mechanical base for repeated acceleration and braking. The 2.4 GHz remote control system is included, and the radio system is water-protected for running in changing ground conditions. An XT90 high-voltage battery connector system and a quick-change battery mount keep battery swaps straightforward between sessions. With a stated runtime of up to 15 minutes, the model suits short, fast runs on dirt, gravel and uneven surfaces where suspension travel and tyre grip can be used fully. Age 14 Years. A battery is required separately.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 Bokusa BL 2S, RC car, 4WD RTR

€219.99

The 1:10 Bokusa BL 2S brings brushless power, 4WD traction and RTR convenience into a 455 mm off-road machine built for fast, dirt-focused running. With a width of 312 mm, a height of 180 mm and a weight of 2165 g, the chassis carries a broad, planted stance that suits rough ground and quick direction changes. Metal differentials at the front and rear use steel bevel gears to distribute drive across the axle line, while the fully ball bearing mounted transmission supports efficient running through the drivetrain. A 30 kg waterproof steering servo with metal gears gives the front end firm steering authority in wet or dusty conditions, and the water-protected 2.4 GHz remote control system keeps control input stable during outdoor sessions. The XT90 high-voltage battery connector system is paired with a quick-change battery mount, so battery swaps stay straightforward between runs. Age recommendation: 14 years and over. As an RTR model, the Bokusa BL 2S is set up for immediate driving once the required power source is added. Gravel tracks, compacted dirt and uneven open ground suit the suspension layout and tyre format especially well, while repeated acceleration runs benefit from the wheelie bar at the rear. Batteries are required separately.  Warning! Not suitable for children under 14 years.

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

€74.99

The 1:10 Cage Fighter brings desert buggy styling, radio-controlled handling and ready-to-run convenience into one fast-moving off-road setup. As a fully assembled RC buggy with 2.4 GHz control, it heads straight into dirt tracks, packed gravel and open ground with a low barrier to entry and a focused motorsport feel. Its full suspension supports precise steering response when the surface turns uneven, while the grippy off-road tyres help the buggy hold traction across changing terrain. Solid bumpers at the front and rear add protection in the zones that take the hardest knocks during close running. At 436 mm long, 234 mm wide and 147 mm high, the chassis has a planted footprint that suits outdoor driving, and the 806 g weight keeps the model agile in direction changes. The included Li-Ion drive battery runs at 7.4 V with 500 mAh capacity, and the set also includes a USB charger, a 2.4 GHz remote control and 2 x LR06/AA transmitter batteries. Top speeds of up to 18 km/h add a brisk pace without pushing the model beyond approachable control. Whether the route runs over compacted soil, short grass or rougher backyard ground, the Cage Fighter is built for active RC sessions rather than shelf display. Age 8+ marks the recommended age, and the 100% RTR format keeps the focus on charging the battery, taking the controller in hand and getting the buggy moving.

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

€74.99

The 1:10 Cage Fighter brings fast off-road RC action into a ready-to-run format with a fully assembled chassis, 2.4 GHz radio control and a 7.4 V 500 mAh Li-Ion drive battery. At 436 mm long, 234 mm wide and 147 mm high, the buggy cuts a planted stance as it charges over dirt, gravel and uneven ground. Its full suspension helps the wheels stay in contact with the surface, so steering inputs translate into cleaner direction changes instead of skittish bouncing. The 806 g vehicle weight supports an agile feel without losing presence on the track. Front and rear bumpers frame the chassis with added protection in the zones that meet obstacles first, which suits repeated running in tighter spaces and rougher outdoor sections. The included USB charger keeps the battery routine straightforward, and the supplied 2 x LR06 AA transmitter batteries complete the set. With a driving time of 25 minutes and speeds of up to 19 km/h, the Cage Fighter suits short backyard sessions, improvised dirt courses and casual head-to-head runs with other 2.4 GHz models. Age 8+ is stated for this RC buggy, making it a strong entry point into radio-controlled driving while still offering enough pace and control to stay engaging beyond the first outings.

RC truggies & RC monster trucks

1:10 Rodstar, RC car, 2.4 GHz 100% RTR

€129.99

The 1:10 Rodstar brings hot rod pick-up styling into an off-road RC format, pairing a multi-coloured printed body with a fully assembled ready-to-run layout. At 430 mm long, 310 mm wide and 200 mm high, the truck carries a broad, planted stance that suits gravel paths, compacted dirt and mixed ground. Its 1364 g weight works with the suspended chassis to give the model a settled feel as the wheels move over ruts and small impacts. A heavy-duty front bumper adds a solid visual edge and houses LED lighting that keeps the front end clearly defined in lower light. Splash-proof electronics support driving where damp patches, loose grit and changing ground conditions are part of the route. The included 2.4 GHz RC system gives radio control straight from the set, while the 7.4 V 1500 mAh Li-Ion power pack supplies up to 25 minutes running time per charge. The Rodstar suits quick sessions on open ground, repeated passes over rough surfaces and scale-style cruising with a custom hot rod look. USB charging keeps the drive battery easy to top up between runs, and the included transmitter batteries complete the package for immediate use.

RC cars

1:12 RaceRival Combo, RC car, 2.4G RTR

€59.99

The 1:12 RaceRival Combo brings 2 fully assembled RC cars into one set, creating instant side-by-side racing with matching 2.4 GHz radio control. Each model measures 304 mm in length and uses a 3.7 V Li-Ion drive battery with 500 mAh capacity, giving the pair a compact racing format with rechargeable power for repeated sessions. The set includes 2 remote controls, 2 Li-Ion drive batteries, 2 USB chargers and 4 AA transmitter batteries, so both vehicles are equipped for running from the start. A maximum driving time of 40 minutes keeps races going beyond a quick sprint and leaves room for repeated heats, overtaking attempts and back-to-back comparisons between the 2 cars. The pistol-grip transmitters use a trigger for throttle input and a side steering wheel layout familiar from hobby-grade RC driving. Steering fine adjustment on the vehicles helps correct the running direction when the track or surface calls for a more precise setup. Front LED lighting remains clearly visible as the cars move through indoor floors or paved outdoor sections, while the printed body shells give each model its own strong race-day presence. With an age marking of 8 years and up, the set suits shared racing sessions at home, quick duel formats in the driveway and casual practice laps where both cars can be charged, lined up and sent off again.

RC lorries & RC trucks

1:14 3-axle Material trailer, RC trailer

€699.99

At 1:14 scale, this 3-axle Material trailer brings the look and handling of a working cargo hauler into a detailed RC setup. The 981 mm long body combines a laser-cut steel frame in 3 mm and 1 mm sections with a real wooden floor application, creating a technical build with strong visual contrast between metal structure and load bed. The front wall is made from aluminium, while the rear bumper uses 8 mm aluminium for a solid, sharply defined finish. Left and right steel underride protection adds another authentic construction detail to the lower sides. The CNC-milled aluminium dropsides carry engraved surfaces and are built for active use rather than fixed display, with 9 functional panels, removable dropside posts, and 4 hinges on each dropside made from 1 mm steel. Neodymium magnets handle the locking, giving the side sections a tidy closing action without bulky external catches. Wide chromated wheels with ball bearings and wide tyres support smooth trailer movement, and the included suspension offers an optional 8 mm elevation for a different ride height. A steel spare wheel holder with spare wheel is fitted, and the finished trailer measures 981 x 195 x 210 mm with a weight of 6,900 g. Age 14+

RC cars

1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR

€54.99

The Lamborghini Murcielago SV translates the dramatic lines of the full-sized supercar into a 1:14 RC model with compact road presence and strong visual detail. At 330 mm long, 145 mm wide and 80 mm high, the body carries opening doors and a lifting hood that add hands-on interaction beyond pure driving. The detailed interior gives the cabin more depth when the body is viewed up close, while the front and rear LED system keeps the silhouette readable in lower light. A differential gear manages the drive effect between the wheels during turns, which helps the model hold a cleaner line through changing corners. Fully sprung suspension adds another mechanical layer, allowing the chassis to settle more evenly as the surface changes. The model weighs 631 g, giving it a planted feel in motion without losing the agile character expected from this scale. The fully assembled 100% RTR format keeps the focus on driving rather than setup, with a 2.4 GHz remote control unit included in the set. Also included are the 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR06 batteries. Driving time reaches up to 25 minutes, making the model well suited to repeated laps, short handling sessions and display breaks between runs.

RC lorries & RC trucks

1:20 MB Arocs Goldhofer, RC truck, 100% RTR

Heavy-haul transport is a defining part of construction logistics, and the 1:20 MB Arocs Goldhofer brings that role into RC form with a 1000 mm long truck and low loader combination. The fully assembled RTR set combines remote-controlled driving with functional trailer handling, creating a model that looks at home moving machinery between workshop shelf and jobsite scene. At 155 mm wide and 185 mm high, the model carries the long, low stance of a transporter, while the 1350 g weight gives the combination a substantial feel in hand. The installed reversing light works automatically together with the tractor unit, adding a realistic response during manoeuvres without needing a separate command. Included in the set are the ready-to-run model, a 2.4 GHz RC system, 2 x 4.8 V NiMH batteries, a USB charger and 2 x AA transmitter batteries. The 30 minute driving time supports extended loading runs, repositioning moves and repeated coupling sequences. Minimum age: 8 years. The low-bed layout suits transport scenes with construction machinery or other scale loads, and the remote-controlled ramp and support add movement beyond simple forward driving. On a floor layout, workshop setup or construction-themed display, the MB Arocs Goldhofer turns loading, uncoupling and trailer positioning into the central part of the action.

RC cars

1:24 Ford GT, RC car, 2.4 GHz RTR

€24.99

The Ford GT became one of the defining super sports car shapes of its era, and this 1:24 RC car brings that low, wide silhouette into a compact format built for quick laps and precise control. With a fully assembled ready-to-run setup, the model goes straight from charging to driving with the included 2.4 GHz remote control, Li-Ion drive battery, USB charger and transmitter batteries. At 195 mm long, 80 mm wide and 49 mm high, the body keeps the proportions of the road car clear while staying easy to handle on smaller indoor routes. The 172 g weight gives the chassis a light, agile feel in motion, and the fine-tuned steering supports accurate line changes through short straights and tighter bends. Front and rear LED lighting extends the visual effect beyond daylight conditions, while the licensed Ford design and realistic sports car look keep the model closely tied to its full-size inspiration. The 3.7 V drive system uses a 500 mAh Li-Ion battery and reaches up to 60 minutes of driving time at full capacity, making longer sessions possible without frequent charging breaks. Non-slip rubber tires work with the rear differential to maintain traction and stable handling as the car accelerates, turns and settles into repeated circuit runs. Age 6+ marks the recommended age, and the complete RTR format suits first RC laps as well as relaxed driving sessions for motorsport fans.

RC cars

1:24 Lamborghini Murcielago SV, RC car, 2.4GHz

€24.99

The Lamborghini Murcielago SV brought sharp-edged supercar drama to the road, and this 1:24 RC version translates that character into a compact model with full driving control. At 195 mm long, 80 mm wide and 49 mm high, the ready-to-run car combines a detailed sports car silhouette with a 2.4 GHz remote control system for responsive runs around living rooms, hallways and home tracks. A 3.7 V 500 mAh Li-Ion drive battery powers up to 60 minutes of driving time, and the included USB charger keeps the setup straightforward between sessions. The fully assembled format gets the focus onto driving rather than setup, while the 172 g weight keeps the model light in hand when moving from shelf to floor. Front and rear LED lighting extends the visual effect into dimmer conditions, giving the body lines and rear spoiler extra presence once the room lights drop. The remote control system is designed for interference-free operation, which helps when several 2.4 GHz vehicles are in use nearby. Short sprints down a corridor, tighter turns around chair legs or repeated laps on a small practice layout all suit the compact footprint. Age 6+ is stated in the product data, and the complete set includes the car, remote control, drive battery, USB charger and transmitter batteries for a quick start to the next run.

Mini RC cars

1:50 Nano City Dump Truck, RC truck, 2.4 GHz

€18.99

Construction trucks have long shaped city streets and building sites with their compact strength and unmistakable working profile. The 1:50 Nano City Dump Truck brings that familiar form into a small RC format with a true-to-original design, a detailed driver's cab and a ready-to-run setup for immediate use. Its fully assembled layout keeps the focus on driving, while the 146 g weight and 135 mm length create a handy format for controlled manoeuvres on tables, floors or improvised indoor routes. The open dump body gives the model its recognisable utility-truck silhouette, and the non-slip rubber tires provide the grip needed for cleaner starts, tighter turns and steadier movement on smooth surfaces. The 2-channel 2.4 GHz radio system supports interference-free control, which is especially useful when several radio-controlled models are active nearby. LED lighting adds another working-vehicle detail and makes the truck easier to track when the route runs through dimmer corners. Included in the set are the ready-to-run model, a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery, a USB charger and instructions. With up to 40 minutes of travel time, the compact dump truck suits quick driving sessions, small construction-themed layouts and repeated laps through indoor obstacle courses.

RC buggys

1:8 Akuma Buggy, RC car, 4WD 100% RTR

€399.99

The 1:8 Akuma Buggy brings large-scale off-road driving into a 505 x 365 x 220 mm format with a 4WD layout, a 2050 Kv 3-pole brushless motor and a 100A 4S drag-style ESC with cooling fan. The colour-printed body, 3-position adjustable rear spoiler and 17 mm aluminium wheel hexes give the buggy a focused racing stance before the first full-throttle pass. A 3 mm aluminium chassis plate forms the base for the drivetrain, while the aluminium motor heatsink supports cooling during hard acceleration. The steering system uses an adjustable aluminium steering plate, and the 20 kg metal-gear servo translates radio input into direct front-wheel response. Aggressive off-road tyres with foam inserts are glued in place for consistent running, and the hardened steel drive shafts connect the powertrain under load. The included 2.4 GHz RC system, 2 x 7.4 V 3800 mAh LiPo drive batteries, charger and 4 x LR06 AA transmitter batteries make the set ready to drive straight after charging. Driving time reaches 10 minutes, and the buggy weighs 3909 g. Forest tracks, compacted dirt and rough open ground suit the Akuma Buggy especially well, where the suspension travel and 4WD drivetrain can be used to carry speed through loose sections. The large 1:8 format also gives the chassis and electronics layout clear presence on the bench between charging sessions and setup checks.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B Unimog U406, RC truck, 100% RTR

€114.99

The Mercedes-Benz Unimog U406 has long stood for compact utility vehicle engineering, and this 1:87 RC version carries that character into a small-format driving model with a matching trailer. In bright orange with detailed paintwork and precise printing, the Unimog combines a true-to-original look with compact radio-control technology for controlled runs across a desk layout, a diorama road or a small indoor course. The 2.4 GHz remote control is part of the 100% RTR setup, so the model arrives with the core driving equipment already matched to the vehicle. Front and rear LEDs work alongside the switchable warning light to sharpen the service-vehicle appearance during operation. Steering trim on the transmitter helps fine-tune straight running, which is especially useful at 1:87 scale where small corrections show clearly. The permanently installed Li-Ion battery is rated at 3.7 V and 75 mAh, and the set also includes the required transmitter batteries plus a storage case for transport and tidy shelf keeping. The trailer broadens the operating scene beyond simple laps, with a tilting bed and removable tarpaulin that suit loading and unloading setups in miniature worksite or farm-style layouts. With age recommendation 14 years and up, the model fits hobby sessions focused on compact manoeuvres, display layouts and detailed vehicle handling in limited space.

RC models in 1:87 scale

1:87 MB 1620 flatbed truck, RC model, RTR

€129.99

The 1:87 MB 1620 flatbed truck with trailer brings compact RC control into H0 railway scenes with a fully assembled 100% RTR setup and finely scaled proportions. At 187 mm in length, the model is sized for dioramas and model railroad layouts where precise movement, lighting and sound add life to streets, depots and loading areas. A 2.4 GHz remote control system handles steering, speed and the switchable engine sound, while the integrated 3.7 V 75 mAh Li-Ion drive battery recharges through the transmitter in about 45 minutes. Front and rear LED lighting supports realistic operation in dimmer layout settings, and the very small turning circle helps the truck work through narrow routes and confined manoeuvring zones. The detailed body uses high-quality plastic construction with fine printing, and the removable tarpaulin changes the look of the trailer for different scene setups. A driver figure adds another scale detail for display, and the included trailer extends the vehicle's presence in transport scenes. With up to 60 minutes of operating time, the model suits longer running sessions on H0 layouts, from careful reversing at a loading bay to steady road movement between buildings and trackside structures.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Mercedes Benz 200/8 Taxi, RC car, RTR

€109.99

The Mercedes Benz 200/8 shaped the look of everyday saloons in the late 1960s and 1970s, and this 1:87 RC car brings that familiar taxi silhouette into a compact radio-controlled format. The small scale and RTR layout combine classic road-car character with immediate driving action on desks, display areas, or smooth indoor surfaces. Its 100% RTR specification means the key running setup is already part of the set, keeping the focus on steering inputs and controlled movement rather than sourcing core equipment first. The included 5 batteries support a ready-to-start configuration straight from the pack. With a recommended age of 14 years, the handling and scale suit enthusiasts who enjoy compact vehicle models with a recognisable real-world subject. The taxi styling gives the body a distinct period look that stands apart from modern racing or off-road themes. Between short driving sessions, the 1:87 format also makes the model easy to place in a collection of miniature road vehicles. It works well as a small RC model for indoor runs, as a conversation piece on a shelf, or as a classic Mercedes Benz subject in a compact hobby lineup.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Mercedes Benz 200/8, RC car, 100% RTR

€109.99

The Mercedes-Benz /8 series shaped everyday motoring in the late 1960s and 1970s, and this 1:87 Carson model captures that familiar saloon silhouette in a compact radio-controlled format. Finished in blue and supplied as a 100% RTR version, the miniature is set up for immediate use with 5 batteries included. Its 1:87 scale gives the model a notably small footprint, making controlled runs possible in spaces where larger RC cars would feel oversized. The classic 200/8 body shape brings a recognisable road-car character to each manoeuvre, while the compact format invites careful steering, short direction changes and neat placement on smooth indoor surfaces. With batteries already part of the set, the focus stays on the driving session itself rather than on sourcing the basic power supply first. Between runs, the blue finish and saloon proportions also make the model easy to place on a desk or shelf as part of a collection of compact vehicles. The combination of RTR convenience, included batteries and 1:87 scale makes this Mercedes Benz 200/8 a concise entry into small-format RC driving for hobbyists aged 14 years and up.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Bus Van, RC car, car trailer

€114.99

The VW T1 became one of the most recognisable light commercial vehicles of the 1950s, and this 1:87 RC version brings that silhouette into a compact driving format with a matching car trailer. At 115 mm long, 28 mm wide and 21 mm high, the ready-to-run model fits neatly into small layouts while still carrying the bus profile, printed finish and illuminated front and rear lighting. The 2.4 GHz radio system gives stable control for 1-player operation, and the fully proportional setup allows measured inputs instead of simple on-off movement. With a weight of 18 g, the model stays light in hand and easy to place on shelves or in model scenes between runs. The included Li-Ion drive battery is rated at 3.7 V and 75 mAh, while 4 LR03 AAA transmitter batteries are also included in the set. Steering trim supports precise correction when the bus tracks slightly left or right, which is especially useful on narrow routes where the small turning circle can be used to full effect. The display case adds a clean way to store the bus and trailer between sessions or present them as part of a collection. On a desk, shelf layout or compact indoor course, the combination of trailer detail, proportional control and long 50-minute runtime creates a focused micro RC driving session with a strong model-railway scale presence.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Pritsche, RC car, green trailer

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 RC version captures that familiar silhouette in a compact format with a green car trailer behind it. The radio-controlled layout turns the classic VW T1 Pritsche into a moving scale model that combines display character with active handling on a small footprint. Its 1:87 scale makes the model easy to place on layouts, shelves, or desks where larger vehicles would need far more room, while the trailer adds a second visual element that extends the transporter theme beyond the cab itself. The green finish gives the combination a clear, period-inspired presence, and the Pritsche body style keeps the utility look of the original vehicle at the centre of the design. As a powered ground vehicle, it brings motion to a format often chosen for static collecting, which changes how the model can be used between display moments and controlled runs. 5 batteries are included. The age marking is 14 Years. The compact dimensions implied by 1:87 scale suit short driving sessions on smooth indoor surfaces, model layouts, or table-based scenes where precise movement matters more than outright speed. It also fits neatly into collections built around classic transport themes, especially where a trailer combination adds extra visual interest without taking over the whole scene.

RC models in 1:87 scale

1:87 VW T1 SambaBus, RC car, 2.4GHz RTR

€114.99

The VW T1 SambaBus with trailer brings classic touring style into compact RC form at 1:87 scale. The ready-assembled set pairs the iconic bus silhouette with a matching caravan, while front and rear LED lights add visible presence during each run. A 2.4 GHz remote control system handles the model with fully proportional inputs, so throttle and steering respond in fine steps rather than simple on or off commands. Steering trim helps keep the vehicle tracking cleanly, especially on narrow routes and detailed miniature layouts. The 3.7 V 75 mAh Li-Ion drive battery supplies the power, and the transmitter also serves as the charging connection with a 60 minute charge time. The compact format and very small turning radius suit controlled driving in limited space where broader models would need more room. The combination of SambaBus and caravan creates a distinctive road-trip scene for shelf display, diorama use or active driving sessions. Included in the set are the ready-to-run model, the 2.4 GHz remote control system, the Li-Ion drive battery and 4 AAA transmitter batteries, so the model is equipped for use straight from the set.  Warning! Not suitable for children under 14 years.

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a nimble 125 mm x 135 mm format with a 150 mm diameter and a 45 mm rotor diameter. A button-triggered 360° flip function adds fast aerial action, while the Coming Home function returns the quadcopter to its home point at the touch of a button, creating a clear, easy rhythm between short flights and recovery. Its 3.7 V/600 mAh LiPo flight battery supports up to 8 minutes of flight time, and the 50 g ascent weight keeps the model light in the air. The IR control concept is paired with 3 speed settings, so the handling can stay measured for early practice or become more lively for tighter reactions. Blue LED lighting adds clear visual orientation once the quadcopter lifts off, especially when the frame is moving quickly through flips, turns and short climbs. The green finish gives the model a bright, high-contrast look in motion. Short sessions in the living room, open indoor areas or calm practice runs with repeated take-offs and landings all suit this ready-to-fly setup. Included contents are the ready-to-fly model, IR remote control, LiPo flight battery 3.7 V/600 mAh, USB charger and instruction manual.

RC quadcopters

Cyber Drone Polizei, quadcopter, 2.4G RTF

€34.99

The Cyber Drone Polizei 2.4G 100% RTF brings compact quadcopter flying into a ready-to-fly format with a 2.4 GHz remote control, a 3.7 V 600 mAh LiPo battery and a USB charger. With a length of 125 mm, a width of 135 mm, a diameter of 150 mm and a rotor diameter of 45 mm, the layout stays light at 50 g ascent weight and suits quick take-offs in smaller open spaces. Its control setup combines several functions that shape how the model behaves in the air. The 8 minute flight time supports short, focused rounds, while the included transmitter power uses 3 AAA batteries. The headless mode changes orientation handling by referencing the control direction rather than the nose position, which helps keep steering inputs easier to read during turns. Trim adjustment for left and right flight allows finer correction when the quadcopter drifts off line. Blue and red flashing LEDs remain easy to spot once the model lifts away from the launch point. Ready-to-fly equipment keeps the set focused on getting airborne with minimal preparation, whether the session starts on a driveway, in a yard or across a calm section of park ground. The compact dimensions, return function and selectable speed levels make it easy to alternate between steady hovering, directional practice and quick stunt passes in the same outing.

Model tanks

DUKW Amphibious Truck Model Kit 1:72 Scale

€15.99

The Italeri 1:72 DUKW Amphibious truck model kit brings a historic military transport into a compact build with the unmistakable shape of its amphibious hull and 6x6 layout. At about 117 mm in length, the finished model fits neatly into display cabinets, convoy scenes or beach landing dioramas while still leaving room for painted detail across the cab, cargo area and hull sides. The full-size DUKW was developed from the General Motor CCKW-353 2 1/2 t tactical transport truck to move loads quickly from ships to beaches during landing operations. Its 4,400 cm3 6-cylinder engine, three differentials and six driving wheels formed the mechanical basis, while the welded hull with horizontal rib reinforcement gave the vehicle its amphibious role. This kit translates that distinctive combination into a detailed plastic build that invites careful assembly, painting and finishing. Decals for 1 version are included to add markings once construction is complete. The subject suits historically focused model collections and WWII scene building, especially where transport vehicles add context beyond tanks and artillery. Assembly is required and the stated assembly time is 600 minutes. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

RC helicopters

Easy Tyrann 280, RC helicopter, 2.4 GHz RTF

€39.99

The Easy Tyrann 280 brings coaxial helicopter flying into a compact 280 x 200 x 125 mm format with a ready-to-fly setup, a 2.4 GHz control system and a top speed of 25 km/h. Its blue and black body, landing skids and illuminated nose give the model a clear presence as it lifts off for first hovering attempts in the living room or on a calm patio. Integrated gyro electronics support steadier flight characteristics, while the aluminium tail boom adds structure to the rear section during directional control. Left and right trim can be adjusted from the transmitter to correct the flight path in the air rather than interrupting a session. The switchable LED position indicators help keep orientation visible when the helicopter turns or moves further from the starting point. A 3.7 V 250 mAh LiPo flight battery powers runs of up to 8 minutes, and the included USB charger handles recharging between flights. The set also includes 3 x AAA transmitter batteries, so the model arrives with the key operating components in the box. This RC helicopter fits short practice sessions, from learning stable hovering indoors to controlled passes in light outdoor conditions. With 12 Years as the stated age marking and 1-player operation, the Easy Tyrann 280 suits focused solo flying where control inputs, trim changes and throttle feel can be learned step by step.

Model figures

French Warriors Model Kit 1:72 Hundred Years War

€10.99

Italeri French Warriors brings the Hundred Years War into 1:72 scale with a historical figure assembly kit built around cavalry and infantry. The set contains 28 unpainted figures in total, made up of 20 soldiers, 8 knights and 8 horses, creating a strong base for medieval battle lines, mounted charges or courtly escort scenes. The unpainted finish keeps every shield, surcoat and horse covering ready for individual colour work, whether the aim is a restrained campaign palette or bold heraldic contrast. Mounted and foot figures allow different scene structures within the same set, so a display can shift from a compact knight formation to a wider battlefield arrangement. The 600-minute assembly time points to a substantial modelling project with room for careful preparation, painting and placement. As an assembly kit, it suits builders who enjoy shaping a historical scene figure by figure rather than placing a finished cast straight onto a base. On a shelf, in a diorama or across tabletop terrain, the 1:72 scale makes the group easy to combine with other period miniatures and scenery. Cavalry can be positioned at the front of a charge while soldiers fill out the background, giving medieval layouts more depth and a clearer sense of movement.

Military figures & accessories

Italeri 1:72 WWII American Infantry Model Kit

€10.99

Italeri 1:72 WWII American Infantry is an assembly kit that brings the look of the 1st Infantry Division into a compact scale suited to military dioramas and historical displays. The set contains 50 figures, giving enough miniatures to build a broad infantry presence with movement, spacing, and unit variety across a scene. The figures are represented with the typical equipment of American infantry during World War II, including the M1 Garand rifle, the B.A.R. automatic rifle, the M3 'Grease Gun' submachinegun, and the Bazooka. That mix supports different battlefield roles within the same set, from riflemen and automatic fire support to close-range submachine gun poses and anti-tank coverage. The 1:72 scale works well for combining the figures with vehicles, terrain pieces, and structures in the same scale. Assembly is required and takes 600 minutes. The kit comes as an assembly kit and the parts are supplied unpainted, leaving the finish open for historically inspired uniform colours and scene-specific detailing. The campaign background reaches from Operation Torch in November 1942 to Sicily, Normandy on June 6th 1944, the Ardennes, and the final advance into German territory in 1945. That span makes the set suitable for beach landings, winter battle layouts, road marches, or urban combat scenes where varied infantry poses help shape a more convincing composition.

Military figures & accessories

Italeri 1:72 WWII American Infantry Model Kit

€12.49

Italeri 1:72 WWII American Infantry brings a large formation of U.S. Army soldiers into a compact military model kit, with 48 unpainted figures arranged for historical scenes inspired by Operation Overlord. The 1:72 scale suits dioramas where troop movement, spacing, and battlefield structure matter, whether the layout focuses on a shoreline assault, an inland advance, or a defensive firing line. The set draws on the 1st and 29th Infantry Division, part of the Fifth Corps, and connects directly to the June 6th, 1944 landing at Omaha Beach between Vierville sur Mer and Sainte Honorine des Pertes. Across 3 sprues, the figures appear in varied action stances that help shape a more convincing unit composition instead of a repeated row of identical soldiers. Uniform gear and weapon handling reflect typical U.S. infantry equipment from the period, while the mix of rifles, automatic weapons, and support gun positions gives the group a clear battlefield character. The parts arrive unpainted, leaving full control over colour scheme, weathering, insignia style, and terrain matching. With a stated assembly time of 600 minutes, this kit suits longer bench sessions focused on trimming, painting, and arranging figures into a coherent scene. It can anchor a Normandy landing display, reinforce a larger World War II terrain build, or expand an existing 1:72 military collection with a substantial infantry presence.  Warning! Not suitable for children under 14 years.

Military figures & accessories

Italeri Alpini Figure Set 1:72 WWII Model Kit

€10.99

The Italeri Alpini figure set in 1:72 brings WWII Italian mountain troops into compact scale for dioramas, war game tables and historical displays. With 48 unpainted figures in the box, the set gives a scene the visual mass needed for defensive lines, marching groups or retreat formations shaped around the Russian front campaign of 1942 to January 1943. The subject draws on the Alpini Julia, Tridentina and Cuneense divisions, which fought on the Don front and later retreated across the Russian steppe under severe winter conditions. That background gives the figures a clear historical setting for snowbound layouts, battlefield vignettes and campaign-based collections. The sprues show multiple infantry poses, including advancing, prone and weapon-handling stances, along with mountain troop details such as skis, poles and field gear. Horse and mounted parts also appear on the frames, adding further options for scene composition. Assembly time is stated as 600 minutes, which suits a build focused on preparation, painting and placement. On a display base, the mix of repeated figures and varied actions helps shape larger formations with a consistent uniform look. In a diorama, the winter equipment and 1:72 scale make the set easy to combine with vehicles, terrain pieces and structures from the same period. Assembly kit. Minimum age: 14 years.

Model car kit

Italeri B.M.W. 320 Gr. 5 Model Kit 1:24

€36.99

The Italeri B.M.W. 320 Gr. 5 model kit in 1:24 scale brings a landmark touring car racer onto the workbench with the broad-shouldered Group 5 silhouette, race number 57 and the vivid 1978 DRM Norisring livery. As the build takes shape, the E21-based body, large fenders and rear wing give the car its unmistakable circuit stance. This assembly kit draws on the competition version developed after the FIA introduced the Group 5 rules in 1976 for special production cars. The real car used a new aerodynamic profile and a 300 hp engine, and that racing character carries through the model's proportions and surface details. Separate parts on black sprues form the chassis tub, suspension elements, cockpit fittings and exterior sections, so the structure develops in clear stages. The decal sheet goes beyond body graphics with driver identification, instrument faces and mechanical markings that sharpen the finished presentation. Assembly is required, with a stated build time of 600 minutes. On a hobby desk, the 1:24 scale supports careful painting, decal placement and final body fitment without crowding fine details. Once completed, the B.M.W. 320 Gr. 5 suits shelf display, diorama use or a line-up with other classic circuit racers from the same era.

Military figures & accessories

Italeri Battlefield Buildings Model Kit 1:72

€9.49

Italeri Battlefield Buildings is a 1:72 model kit for building WWII scenery that gives military layouts a defined checkpoint, lookout and field support area. The set combines a tall watchtower, a sentry hut with boom barrier and a covered shelter, creating a compact group of structures that can frame roads, camp entrances or defensive positions with a more complete battlefield setting. The watchtower stands on a narrow 4-leg structure with cross-bracing and a ladder leading to the roofed platform, while the hut and barrier form a clear access point for convoy or perimeter scenes. Textured parts on the sprues reproduce plank surfaces, ground sections and structural panels that respond well to careful painting and weathering. Additional accessories such as sandbags, crates, rocks and stretcher-style pieces help break up open ground and support more layered placement around vehicles and figures. A decal sheet is included for the shelter and checkpoint markings, including a red cross emblem and striped graphics. With 600 minutes assembly time, the build suits modelmakers who want scenery that adds narrative around 1:72 vehicles and figures rather than another standalone machine. The finished structures can anchor a border post, aid station, depot entrance or observation point, giving static displays and tabletop scenes more context at the edges of the action.

Military figures & accessories

Italeri British Paratroopers Model Kit 1:72

€10.99

Italeri 1:72 British Paratroopers brings a WWII airborne unit into miniature form with 50 unpainted figures designed for assembly and finishing. The set draws on the British 1st Airborne Division, known as the Red Devils, and places the scene in Operation Market Garden in September 1944, where airborne troops were tasked with securing key bridges over the Rhine and the Meuse. On the bench, the tan sprues show repeated figures and equipment laid out for a full unit build rather than a single display piece. The 1:72 scale makes the figures suitable for military dioramas, battlefield layouts and integration with other scenery of the same scale. Poses visible across the set include standing riflemen, advancing soldiers, kneeling shooters and prone figures, which helps create movement across rubble, streets or bridge sections. Sculpted uniform features include camouflage smocks, netted helmets, chest pouches, belts, straps, boots and rifles, giving painters defined edges for colour separation and weathering work. The stated assembly time is 600 minutes, which reflects a project with room for careful preparation, painting and scene planning. Placed across a bridge approach, ruined street or defensive line, the figures can form a compact airborne section with a shared historical identity. The set also works as a source of 1:72 infantry for expanding larger WWII layouts where repeated troop types and coordinated poses matter.

Military figures & accessories

Italeri French Infantry WW II Model Kit 1:72

€10.99

Italeri French Infantry WW II brings Free French Forces into 1:72 scale with 49 unpainted figures shaped for historical scenes from the Second World War. The assembly kit draws on the return of French units to Allied action in 1944, making it a strong base for dioramas that place infantry, support weapons and casualty evacuation into one coherent battlefield setting. The figure selection reaches beyond standard marching poses. Riflemen, stretcher bearers, a light machine gun position, a bazooka operator, a mortar team and observation roles with binoculars create a broader tactical spread across the set. That mix helps a builder stage movement, covering fire, reconnaissance and medical support rather than repeating a single stance across the whole display. Because the figures are supplied unpainted, the finish can follow campaign-specific uniforms, field gear tones and weathering effects chosen for Normandy or the Italian front. The 600 minute assembly time also points to a hobby build with room for careful cleanup, painting and placement. On a shelf, the set can form a compact historical vignette with layered action and clear role definition between the figures. On a wargaming table, the 1:72 format works smoothly alongside period vehicles, scenery and other military miniatures, helping larger World War II layouts keep a consistent visual scale while adding Free French infantry to the scene.

Military aeroplane models

Italeri Junkers JU-87B Stuka 1:48 Model Kit

€39.99

The Italeri Junkers JU-87B Stuka 1:48 model kit brings a defining Battle of Britain aircraft into a build that combines historical character with a clearly recognisable airframe. At 22.9 cm long, the finished model shows the inverted gull wings and fixed landing gear that made the Ju 87 silhouette so distinctive in period photographs and reference collections. This assembly kit is built around a detailed plastic format and includes a super decals sheet for 4 versions, opening several marking paths for the same aircraft type. The set also contains photo-etched parts, which add finer definition to selected details and support a more intricate finish than standard moulded sections alone. The subject itself reflects the Ju 87B as a two-seat dive-bomber and ground-attack aircraft first flown in 1935, with combat use beginning in 1936. Italeri frames this edition around the Battle of Britain 80th Anniversary, linking the model directly to a specific wartime chapter. A stated assembly time of 600 minutes gives the project a measured pace suited to careful painting, decaling, and staged construction. The completed aircraft sits well in a display line with other 1:48 aviation subjects, and the 4 marking versions create room to build a distinct variant within that scale collection. Recommended age: 14 years and up.

Model tanks

Italeri M4A2 U.S. Marine Corps Tank Kit 1:35

€35.99

Italeri M4A2 U.S. Marine Corps is a detailed 1:35 scale assembly kit that brings the Sherman medium tank into a focused build with a finished model length of 16.8 cm. The subject represents the diesel-powered M4A2 variant used by the United States Marine Corps in Pacific operations, giving the model a clear historical setting as the hull, turret and suspension come together piece by piece. The kit uses new gluable T54E1 tracks, a feature that adds extra definition to the running gear and changes how the lower hull reads once the tracks are fitted around the wheels and sprockets. A decal sheet for 4 versions opens up different marking choices, including named vehicles and alternate tactical codes, so the final finish can follow different U.S. Marine Corps examples from Iwo Jima in February 1945. The build is marked 14 Years+ and the stated assembly time is 600 minutes, which suits a project with multiple construction and finishing stages. Assembly kit contents are included. On the bench, the 1:35 format gives enough room to work through camouflage, turret markings and smaller exterior details with control. Once completed, the Sherman shape, Marine Corps markings and tracked stance give the model a strong presence in a WWII collection, diorama scene or display lineup centered on Pacific theatre vehicles.

Trailers & accessories

Italeri Reefer Trailer Model Kit 1:24 Scale

€62.99

The Italeri Reefer Trailer model kit brings a latest-generation refrigerated semitrailer into 1:24 scale with a finished length of 58.7 cm and a distinctly European freight profile. The long box body, front-mounted refrigeration unit and triple-axle rear section create the look of a temperature-controlled trailer waiting at a loading dock or lined up with a tractor unit in a road transport display. This assembly kit is built around the detailing that gives a reefer its working identity. The chassis construction, underbody equipment and support-leg structure shape the trailer from the frame upward, while the new wheels update the running gear for a more current appearance. Large side graphics for NORD CARGO, route names including Barcelona, Castellon, Madrid, Malaga and Moerdijk, plus rear-door markings and registration options add a commercial fleet character drawn from European cold-chain transport. The finishing stage also includes paintwork and decal application, which gives the long side panels and rear doors their full visual impact. With 600 minutes assembly time, the build suits a slower bench session focused on alignment, painting and final decoration. Paints, cement and tools are required separately. Once completed, the 1:24 trailer works well as a standalone display subject or as part of a larger truck modelling scene with depot, warehouse or highway freight context.

Model tanks

Italeri VW Typ 82 Kübelwagen Model Kit 1:35

€12.99

The Italeri 1:35 VW Typ 82 Kübelwagen brings a compact World War II military vehicle into a scale model format with a finished length of 10.6 cm. Its small footprint suits display in a cabinet, on a desk, or as part of a larger historical layout, while the open utility-car design gives the build a recognisable silhouette with clear body lines and period character. The kit is supplied as an assembly kit and is recommended for ages 14 years and up. A stated assembly time of 600 minutes points to a build that rewards steady, detailed work across the vehicle and the 2 included figures. The scale of 1:35 places the Kübelwagen in a format widely used for military modelling, making it easy to stage with terrain elements and scene accessories from the same scale. The subject draws on the vehicle's wartime use across demanding terrain, a background that gives the finished model a strong historical identity. On the workbench, the combination of vehicle, figures, and markings supports a complete scene rather than a standalone build. The decal sheet for 1 version helps define the final look, whether the model is placed in a desert setting, a field command scene, or a transport display focused on military vehicles of the period.

Military figures & accessories

Italeri Walls and Ruins II Diorama Kit 1:72

€9.49

Italeri Walls and Ruins II is a 1:72 assembly kit built around ruined architectural scenery for World War II dioramas. Broken walls, a large arch, smaller fragments and sandbag positions create the look of a shelled urban setting, giving military scenes a clear sense of place instead of leaving figures and vehicles on an empty base. The gray molded parts arrive on sprues and show engraved stone blocks, exposed brick, cracked plaster, wood details and rubble textures. One section carries an arched door, another a window opening, and the varied wall heights help shape sightlines, cover and depth across a compact display. Because the scenery is assembled from separate components, the layout can be planned around narrow streets, defensive corners or partially collapsed structures. The stated assembly time is 600 minutes, which suits a more involved build with painting and weathering stages. Placed beside 1:72 soldiers, artillery or vehicles, the ruin sections frame convoy routes, barricaded approaches and damaged strongpoints with a more convincing backdrop. The set also works as a focused terrain build on its own, where brick edges, masonry surfaces and sandbag details reward careful finishing and turn a plain base into a wartime street scene.

Military figures & accessories

Italeri WWII Accessories and Bunkers Model Kit

€22.99

Italeri WWII Accessories and Bunkers is a 1:72 model kit built around a fortified World War II bunker scene with terrain and defensive details. The finished layout brings together a bunker structure, a shaped ground base and a spread of scenic parts that give military displays a clear historical setting rather than a bare stand-alone structure. The kit uses unassembled moulded parts and a vacuum base measuring 262 x 156 mm to form the scene. Curved wall sections, textured terrain elements and smaller structural pieces shape the bunker itself, while separate scenic details build out the position around it. Sandbags, barrels, crates, barricade-style frames and anti-tank obstacles add layers that suit diorama composition, static military displays and other 1:72 layouts. The bunker design shown in the assembled scene features a grass-covered roof, firing slits and an entrance opening, giving the fortification a recognisable defensive profile. With a stated assembly time of 600 minutes, the build suits model makers who enjoy arranging scenery as well as structure. The completed scene works as a focal point in a WWII display, as a terrain feature alongside other 1:72 military subjects, or as a compact standalone diorama with battlefield character.

Model car kit

Mercedes 500 SLC Model Kit 1:24 Scale Coupe

€36.99

The Italeri Mercedes 500 SLC brings a classic 1970s coupe into 1:24 scale as a detailed assembly kit with crisp body lines, chromed parts and rubber tyres. The long bonnet, pillarless side profile and broad front grille give the finished model the unmistakable stance of the full-size grand touring car, whether it is built as a shelf display or as part of a classic road-car collection. This kit draws on the Mercedes-Benz 500 SLC, a coupe derived from the C107 series and powered in the original car by a 4973 cc engine with 237 HP. That background shapes the model's character: a large 2-door coupe with a strong road presence rather than a stripped competition machine. The exterior details visible in the source design include dual round headlights, a prominent star emblem, black lower body trim, chrome-style wheel covers and bumper-integrated lighting elements. The body finish shown for the model combines a light green main colour with contrasting metallic and dark trim areas, giving painters a clear route to a period-correct look. With a stated assembly time of 600 minutes and a 14 Years age marking, the build suits modellers who want time for careful preparation, painting and final detailing. On a workbench, the separate finishing stages let the chrome, body colour and tyre textures develop their own visual roles. Once completed, the coupe shape and classic Mercedes proportions give the model a composed display presence among road cars from the same era.

Model car kit

MiniArt D8511 Tractor Model Kit 1:24 Scale

€48.99

MiniArt D8511 brings a 1936 German industrial tractor into 1:24 scale as a detailed plastic model kit with a strong mechanical look and a clear vintage silhouette. The larger scale gives the finished tractor room to show its tall exhaust stack, exposed controls, broad wheels and body panels with more visual presence on the shelf. The assembly kit is built around multiple molded parts that represent the tractor's structure and working hardware rather than a simplified toy-like form. Sprue details shown for the kit include cylindrical tank elements, pipe sections, bracket parts, platform surfaces and engine-area components that help shape a more technical build. A separate decal sheet adds period markings such as LANZ graphics, identification numbers and small warning labels, supporting a finish that matches the industrial character of the original machine. The stated assembly time is 600 minutes. Paints are required separately. On the workbench, the 1:24 format leaves enough space for careful painting, decal placement and weathered finishing effects across the tractor's body and mechanical areas. Once completed, the D8511 suits display in a vehicle collection, a historic machinery lineup or a diorama scene centered on 1930s industrial transport.  Warning! Not suitable for children under 14 years.

RC helicopters

Nano Tyrann 230 Gyro, RC helicopter, 2CH IR

€24.99

Compact dimensions and a coaxial rotor layout give the Nano Tyrann 230 Gyro a light, agile presence in indoor flight, while intelligent gyro electronics keep the model composed during lift-off, hovering and direction changes. At 225 mm long, 97 mm high and only 31 g in weight, this 2-channel RC helicopter brings controlled handling into a format that is easy to store and quick to prepare. The infrared control system focuses the flying experience on the core inputs, with left and right trim on the transmitter to correct the track when needed. A 3.7 V 130 mAh LiPo flight battery powers up to 8 minutes of flying time, and charging runs through the included USB cable. The rotor diameter of 180 mm gives the helicopter a balanced footprint for indoor rooms, where short climbs, hovering practice and careful turns can be repeated in a manageable space. The switchable LED adds a visible point at the nose during flight and can be controlled directly from the transmitter. The ready-to-fly set suits spontaneous sessions in living rooms, hobby spaces or other indoor areas where compact RC aircraft can be flown with precision. Age 12 years and up. Only suitable for indoor use.

Military figures & accessories

Pz.Kpfw. V Panther Ausf. A 1:72 Model Kit

€15.99

The Italeri Pz.Kpfw. V Panther Ausf. A in 1:72 scale brings one of the most recognisable WWII tank designs into a compact model format with a strong historical identity. The finished subject combines the Panther's angled front armour, turret silhouette and long-barrelled main gun in a size that suits shelf display, collection cabinets and tabletop military layouts. This detailed plastic kit is built from multiple sprues that cover the hull, turret, road wheels, drive sprockets and exterior fittings. The turret assembly uses separate parts for the gun barrel, mantlet and roof details, while the hull construction adds deck features, side components and smaller mounted elements for a more layered finish. The instructions also show optional Zimmerit surface texturing for builders who want to recreate anti-magnetic coating effects on the vertical and sloped armour plates. Historical finishing is a major part of the build, with 5 marking versions and camouflage references spanning April 1944 to April 1945. During the build, the compact 1:72 format still leaves room for distinct details such as the running gear, side skirts and turret fittings, making painting and weathering especially rewarding. The included figure can be placed with the completed tank to strengthen scale presence in a display or diorama scene. Assembly kit contents are included, while cement, paints and tools are required separately.  Warning! Not suitable for children under 14 years.

Cars

Scalextric Brabham BT26 Monaco GP '69 Slot Car

€79.99

Scalextric Brabham BT26 brings the Monaco GP '69 car into 1:32 scale with the slim nose, open cockpit and exposed-wheel Formula layout that defined late-1960s grand prix racing. The dark blue body, white aero elements and period number panels give the model a clear race-day identity as it threads through bends on a slot circuit. Close inspection reveals silver suspension parts, side exhaust pipes, rear wing supports and an exposed engine area with visible intake detail. Sponsor markings such as Dunlop, Autolite and Castrol deepen the historic racing character, while the seated driver figure with helmet adds another layer of realism to the cockpit view. The guide beneath the front section keeps the car aligned in the slot, turning the detailed body into a working racing model rather than a static replica. On a home layout, the compact 1:32 format suits head-to-head running, pit-lane scenes and display between races. Age 14 Years. Whether circling a straight, diving into a curve or parked trackside, the Brabham BT26 carries the look of a classic Formula machine in a format made for slot racing.

Cars

Scalextric Lotus 79 #5 Andretti 1978 Slot Car

€75.99

Scalextric Lotus 79 #5 Andretti 1978 brings the shape of a World Champion Formula 1 car into 1:32 slot racing with a black and gold livery, open cockpit and the low, winged profile that defined its era. Set on the rails, the car combines historic motorsport character with the focused feel of a single-seater built for fast circuit running. The bodywork carries period markings such as John Player Special, OLYMPUS CAMERAS and Valvoline, with the number 5 placed into the race layout seen across the nose, side and rear sections. A silver driver helmet with red striping sits in the cockpit, adding a clear focal point when the car is viewed from above or from the side of the track. The front wing, rear wing, sidepods and exposed wheel layout give the model the unmistakable proportions of a late 1970s Grand Prix machine. Close-up views also reveal details around the rear section, where the wing, engine area and upper body surfaces add extra visual depth. On a home circuit, the 1:32 scale suits close racing, lane changes and repeated laps where the long, low silhouette stays easy to read through bends and straights. The same detailing also gives the car a strong shelf presence between sessions, especially when the black finish, gold pinstriping and race graphics are seen from a side or top angle.  Warning! Not suitable for children under 14 years.

Cars

Scalextric Porsche 963 Daytona 25 1:32 Car

€59.99

Scalextric Porsche 963 Daytona 25 captures a current endurance racing shape in a 1:32 slot car format, pairing the low, wide prototype profile with the JDC Miller MotorSports livery for a focused circuit presence. The Porsche 963 name and Daytona 25 race theme give the car a recognisable motorsport identity that reads clearly on the track as it moves through bends, chicanes and straights. The 1:32 scale keeps the car aligned with a widely used slot racing format, making it a natural fit within existing race line-ups and garage displays. Its modern prototype silhouette brings a different visual character from GT and touring entries, with a body shape defined by endurance-racing proportions rather than road-car cues. The named JDC Miller MotorSports decoration adds team-specific detail instead of a generic race finish, which helps each lane assignment and race order stay easy to follow during head-to-head sessions. Batteries are not included. With an age marking of 14 Years, this car sits in the older hobby category and suits collectors as well as regular home circuit use. It works well as a single addition to a current grid, as a themed Daytona entry for endurance-style running, or as part of a broader modern prototype line-up built around real race names and liveries.  Warning! Not suitable for children under 14 years.

Cars

Scalextric Puma Rally Hot Laps Race Set

€189.99

Scalextric Puma Rally Hot Laps brings 1:32 slot racing into a rally themed layout with 2 Ford Puma Rally1 cars, a 532 cm circuit and a raised flyover that breaks the lap into fast straights, tight turns and a clear overhead crossing. The finish gantry and lane markings frame each run with a race day look that suits repeated head to head sessions. The set uses wired hand controllers with red and blue trigger sections, making lane identity easy to read at a glance while the speed limiter supports steadier throttle control. The Hot Laps app extends the racing format with single player championship and 2 player head to head modes shown on the mobile interface. Course selection in the app includes Desert Stage, Forest Stage and Mountain Stage, each presented with its own difficulty level. The track footprint measures 210 x 140 cm, giving the figure 8 style layout enough width for the bridge supports, long sweepers and the start area. On a table, playroom floor or hobby setup, the circuit creates a compact rally scene with visible elevation change and a strong sense of competition between both lanes. The Ford Puma Rally1 pair suits quick rematches, timed laps and side by side duels where the crossover, finish line and controller input stay in constant view. Age 14 Years  Warning! Not suitable for children under 14 years.

Cars

Scalextric Williams FW11B 1987 Slot Car 1:32

€75.99

Scalextric Williams FW11B 1987 brings a classic Grand Prix silhouette to 1:32 slot racing with its low single-seater body, open cockpit and prominent front and rear wings. The number 5 livery and Honda-powered Williams styling give this model a strong late-1980s Formula 1 identity that reads clearly on the circuit and in a display line-up. The bodywork carries period-style sponsor graphics across the nose, side sections and rear wing, while the exposed suspension styling and driver helmet detail add depth to the racing replica. Beneath the car, the guide blade sits in the slot and the pickup braids draw power from the rails, the core mechanism that lets the car follow the groove through straights and bends. Black wheels and wide slick tyres complete the era-correct look, matching the visual language of Grand Prix cars from the 1987 season. On a home circuit, the compact 1:32 scale fits naturally into established slot layouts and makes close wheel-to-wheel sessions easy to stage. Between races, the bold yellow, blue and white colour scheme, tall rear wing and crisp markings give the Williams FW11B 1987 a strong shelf presence for motorsport collections. Age 14 Years

Model trucks

Scania T143 M500 Top Line 1:24 Model Kit

€62.99

The Italeri Scania T143 M500 Top Line captures a landmark heavy truck in 1:24 scale, translating the presence of the 1990s road icon into a detailed assembly kit. Its subject is the Scania 143 M500 Topline, a tractor unit known for combining long-distance capability with a high cab format that gave the vehicle its unmistakable road profile. The original truck was defined by a 500-horsepower V8 engine and a 16-speed transmission, and those specifications give this model much of its appeal as a technical replica. The Topline configuration is central to the look, with a high, spacious cabin that set this version apart within commercial transport. The source vehicle was also associated with an advanced braking system, air suspension, strong efficiency and substantial load capacity, placing it firmly in the world of heavy logistics. Assembly is required, and the stated build time is 600 minutes. The box contents list an assembly kit. On the workbench, the 1:24 format gives the truck a scale large enough to reward careful painting and finishing while keeping the build focused on a single classic tractor unit. Once completed, the model suits display settings that highlight cab shape, grille details and the character of a well-known European long-haul design. Minimum age: 14 years.  Warning! Not suitable for children under 14 years.

Model tanks

Sd.Kfz. 171 Panther Ausf. A 1:35 model kit

€36.99

The Italeri Sd.Kfz. 171 Panther Ausf. A in 1:35 scale brings one of the most recognized WWII tank designs into a build focused on shape, surface detail and historical finishing. The assembly kit centers on the Panther Ausf. A configuration, with the angled front armour, turret form and long 75 mm KwK 42 gun giving the model its unmistakable stance on the shelf or in a diorama scene. The full-size vehicle was developed in response to the Soviet T-34 and KV-1 and combined mobility, armour layout and firepower in a design that served on several major fronts. That background gives the model a strong historical identity while the kit format leaves room for careful painting and weathering work. Assembly time is stated as 600 minutes. The box contents are listed as an assembly kit. Paints, cement and tools are required separately. Marking choices support several wartime versions, including vehicles used in Normandy, Northern Italy and Ukraine during 1944, which opens the door to different camouflage treatments and unit presentations. On a workbench, the build suits methodical step-by-step construction; once finished, the 1:35 scale format sits naturally in a military display alongside other armour subjects and scenery elements. Age 14 Years+

RC helicopters

Toxic Spider 340, RC helicopter, 100% RTF

€39.99

The Toxic Spider 340 100% RTF combines a coaxial rotor system, intelligent gyro electronics and a compact indoor format in one ready-to-fly RC helicopter. Black and green styling, illuminated LED headlights and a top speed of 10 km/h give each flight a crisp, technical presence as the model lifts from its landing skids and settles into stable hovering. Its 2.4 GHz remote control system works with 3.5 channels, allowing coordinated inputs for ascent, descent, turning and directional correction. The aluminium tail boom adds a light, rigid rear structure that supports balanced handling in the air. A 3.7 V 400 mAh LiPo flight battery powers the helicopter for up to 8 minutes, giving enough time for repeated take-offs, short circuits and hover practice. Included in the set are the ready-to-fly model, the remote control system, the LiPo flight battery, a USB charger, 3 transmitter batteries and instructions. The age marking is 12 years and up. Indoor sessions suit the Toxic Spider 340 especially well, whether the focus is on learning steady hover control in a living room or linking smooth turns through open space in a hallway. With the charging gear and transmitter batteries already included, the set brings the key flying components together in one box for immediate RC action after charging.

RC tires & rims

1:10 2WD Wheel Set XL, RC tire set

€37.99

Large-diameter tires can transform the look and running character of a 2WD model, and this 1:10 2WD Wheel Set XL is built exactly for that step. The set combines 4 XL wheels in a black and white finish with front-axle steering levers, creating a coordinated upgrade for buggy and truck chassis that move toward a monster-style setup. The technical layout is split clearly between front and rear fitment. Front rims are prepared for ball bearings, while the rear rims use Tamiya 12 mm hex mounts, matching a common 2WD drivetrain arrangement. Each tire measures 105 mm in diameter and 65 mm in width, dimensions that change both ground presence and the tire footprint on uneven surfaces. The included steering levers are not an afterthought; they are supplied specifically for the front axle because the larger wheel size can alter conventional steering angles. That added hardware keeps the conversion focused on usable steering response rather than appearance alone. On gravel, dirt and rougher off-road sections, the broader tire format gives 1:10 2WD builds a more planted contact area. The set suits rebuilds, visual conversions and chassis updates where standard wheels look undersized against a taller off-road stance. Age 14+

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD

€31.49

Built for 1:10 2WD buggies and trucks, this 4-piece all-terrain wheel set brings a track-ready combination of steering precision and drive traction to mixed surfaces. The black and white wheel design pairs 2 front tyres and 2 rear tyres in different widths, creating a layout that suits the demands of a 2-wheel-drive setup on road, gravel, sand and grass. At the front, the 26 mm tyre width supports a more exact steering response, while the 43 mm rear tyres give the driven axle a broader footprint for stronger acceleration grip on loose ground. Each wheel has a 90 mm diameter, giving the chassis a useful balance of agility and clearance over uneven terrain. Foam inserts inside the tyres help the contact patch stay consistent as the model changes direction or loads up under power. The front rims are designed for ball bearings, and the rear rims use Tamiya hex mounts, matching the different mounting needs across the vehicle. Because the tyres are professionally pre-glued, the set goes straight into the workshop plan without a separate bonding step. That makes it a practical choice for replacing worn running gear, preparing a buggy for mixed-surface driving, or setting up a truck for more dependable traction away from smooth tarmac.

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD/4WD

€31.49

Built for mixed-surface running, this 1:10 all-terrain wheel set combines a 90 mm diameter with a 2WD/4WD layout that suits a wide range of RC setups. The 4-piece configuration uses 2 front tyres and 2 rear tyres, creating a purposeful combination for models that need clear steering response at the front and stronger drive support at the rear when the surface changes from asphalt to loose ground. The front tyres measure 26 mm in width, while the rear tyres measure 43 mm, giving the set a staggered format that supports balanced handling under acceleration. Black and white rims add a clear competition-inspired look, and the tyres are professionally pre-glued to the rims for a clean fit straight from the pack. Integrated foam inserts help the tyres hold their shape during intensive driving manoeuvres, so the tread can work consistently as the model loads up in turns and over uneven sections. The wheel set is designed for 4 x 12 mm Tamiya hex mounts, making it a practical replacement set or a fresh running option for compatible chassis. On road, gravel, sand or grass, the all-round tread is aimed at drivers who switch between surfaces instead of tuning for only one. The set suits routine replacement after wear, but also works as a handling-focused update when a model needs broader traction coverage for everyday RC running.

RC combustion engines & glow plugs

1:10 BL Motor Dragster Turbo 2.0, motor

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 3200KV is a brushless drive unit created for electric RC vehicle projects with a clear focus on dragster-style power delivery. Its 3200KV specification points to a fast-revving motor character that suits straight-line acceleration setups and gives model-building enthusiasts a concrete tuning component for 1:10 platforms. As a standalone motor, this unit fits into workshop-based RC builds where the drive system is chosen part by part. The brushless layout makes it a relevant option for hobbyists comparing replacement motors or planning a fresh electric configuration around a defined KV value. The Turbo 2.0 naming gives the motor a distinct place within the range, while the 1:10 scale reference keeps the application tied to model car use rather than full-size electronics. No batteries are included. The age marking is 14 Years. On the bench, this motor suits rebuilds, performance-focused maintenance and targeted drivetrain changes in electric model cars. It also works well as a search-friendly option for enthusiasts narrowing a setup by scale, motor type and 3200KV specification before matching the rest of the electronics separately.  Warning! Not suitable for children under 14 years.

RC brushless motors

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a compact power package to RC vehicle builds with a sensorless 3200 kV motor and an electronic speed controller matched to hobby-grade running. In the chassis, the black finned motor layout and separate controller create a clean drive setup for fast acceleration and direct throttle response. The motor delivers a no-load speed of 24,420 RPM and approx. 390 W short-term output, with 53 A continuous current for sustained running. Its dimensions of 35.8 x 50 mm and a shaft diameter of 3.175 mm provide concrete fitting data for compatible installations, while the motor weight of 148 g and ESC weight of 80 g help when planning the balance of a 1:10 model. The controller is designed for 7.4 V operation and works with 2S LiPo or 6-cell NiMH battery packs. Forward, brake and reverse functions are built into the ESC, and the T-Plug connector forms part of the power connection. This set suits RC car projects that need a coordinated motor and controller combination rather than separate component sourcing. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a matched drive upgrade to electric RC models with a 2000 kV sensorless motor and a 60 A electronic speed controller. This 2-part combination is built for hobby setups that need clear throttle delivery, compact installation and a defined power package in one box. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, making it a concrete fit option for many 1:10 chassis layouts where motor space and shaft size matter during planning. Its no-load speed reaches 15,170 RPM, while short-term output is rated at approx. 236 W for lively response when the drivetrain comes under load. The ESC adds 80 g, handles 60 A continuously and up to 360 A peak, and manages forward, brake and reverse functions through a sensorless brushless system. Power supply compatibility covers 2S LiPo and 6-cell NiMH packs, with a T-Plug connector already specified. This set suits rebuilds, replacement projects and performance-focused electronics swaps in 1:10 electric vehicles. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions, giving model-building enthusiasts a clearly defined basis for a fresh drive configuration.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, motor, 2600KV

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 2600KV is a brushless drive component for electric model vehicle setups, centered on a 2600KV motor specification and a format matched to 1:10 applications. As a dedicated replacement or upgrade part, it brings the drive system back into service with a clearly defined motor unit for workshop benches, rebuilds and running repairs. Within a powered vehicle setup, the motor sits at the heart of the drivetrain, making the KV rating a key reference point when matching the unit to the existing electronics and the intended running character. The product data identifies this version specifically as the Dragster Turbo 2.0 motor, which keeps the designation clear when replacing a worn unit or sourcing the correct spare for an existing model. Because this is a component rather than a complete vehicle, the focus stays on fit within an electric model system and on the practical value of having the correct motor type ready for maintenance. The 14 Years age marking is stated in the product data. On the workbench, this kind of motor suits planned repairs, drive refreshes and parts-led tuning sessions where a named 1:10 brushless unit is the required starting point for getting a model back on track.  Warning! Not suitable for children under 14 years.

RC servos

1:10 KO RSx4S-one10X, servo, low profile

€124.99

The KO RSx4S-one10X is a 1:10 low-profile servo shaped for compact RC chassis where installation height and steering packaging need careful control. Its metal gear layout and the stated 11.8 V specification place it firmly in performance-focused electronics setups, giving model-building enthusiasts a concrete steering component for advanced builds. The low-profile housing suits layouts where body clearance, linkage position and surrounding electronics leave little spare room. In that context, the 0.10-second speed figure supports fast steering response when direction changes need to happen with little delay. The servo format also makes it relevant for 1:10 on-road and competition-style configurations that rely on tidy component placement rather than oversized hardware. As an electronic control component, it belongs in a build where the steering system, power supply and chassis geometry are chosen as a matched package. On the bench, the compact form helps when planning a clean electronics layout around the steering area. Once installed in a compatible 1:10 model, the combination of low-profile dimensions, metal gears and high-voltage operation supports focused tuning for precise handling response.  Warning! Not suitable for children under 14 years.

RC cars

1:10 Night Racer 2.0, RC car, 2.4GHz RTR

€74.99

The Night Racer 2.0 brings low-slung on-road styling and ready-to-run RC action into one focused 1:10 setup, with a 2.4 GHz control system and a top speed of 20 km/h shaping fast laps on smooth ground. At 485 mm long, 200 mm wide and 125 mm high, the body cuts a sharp racing silhouette that stands out in motion and under evening light. A 260 mm wheelbase and a weight of 737 g give the chassis a balanced footprint for quick steering inputs and stable tracking through linked corners. The differential transmission helps the driven axle work cleanly when the car changes direction, while the suspension layout keeps the wheels in contact over uneven patches and transitions. The included 7.4 V 1200 mAh Li-Ion drive battery supports up to 40 minutes of driving time, and the USB charger keeps the running gear simple to prepare between sessions. Detailed paintwork adds a finished motorsport look, and the blue illuminated rim design sharpens the visual effect once the light drops. On a driveway, in a car park or across a smooth indoor surface, the RTR setup gets the car moving with the supplied remote control system and included transmitter batteries. The compact racing profile, quick response and illuminated wheel styling suit short speed runs, repeated corner practice and evening cruising alike.

RC tires & rims

1:10 Wheel Set XL, RC wheels, 4WD 12 mm hex

€34.49

Large-diameter wheels can change both the look and the handling of an RC build, and this 1:10 4WD wheel set XL does exactly that with 4 complete wheels in black and white. The 105 mm diameter and 65 mm width create a noticeably larger footprint that suits rougher ground and gives the chassis a more assertive visual presence. Inside each tyre, foam inserts are matched to the construction so the rubber is supported under load instead of folding over or rolling at speed. That internal support helps the tread stay more stable through acceleration, direction changes and uneven sections, which can make the model feel calmer and more predictable in motion. The set is built around 12 mm hex mounting, a widely used format that allows straightforward installation on matching wheel hubs. Compatibility is stated for Tamiya hex mounts, making the set a practical option for many established 1:10 4WD platforms. On loose surfaces such as sand or grass, the XL dimensions can help the model carry momentum with a broader contact area. On firmer ground, the same wheel size gives the chassis a fuller, more aggressive stance that changes the overall character of the build without altering the core layout.

RC Crawler

1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR

€249.99

The 1:10 X-Crawlee Pro 3.0 brings crawler driving into a 43.5 cm format built for rough ground, with a 270 mm width, 235 mm height and a weight of 2280 g that gives the model a planted stance on the trail. Its 100% RTR setup puts the focus on driving from the first session, while the 2.4 GHz remote control system keeps control inputs clear and direct. Power comes from the included 7.2 V NiMH drive battery with 1800 mAh, charged via the included 7.2 V / 1 A USB charger. At full capacity, driving time reaches up to 70 minutes, giving longer runs across stones, dirt tracks and uneven paths without frequent charging breaks. The controller is compatible with NiMH and LiPo batteries, which broadens battery choice for later setup changes. Full ball bearings support efficient running through the drivetrain, while the suspended rigid axles give the crawler the axle movement needed for slow, technical sections. The ready-to-run set includes the model, the radio system, the drive battery, the USB charger, 4 AA transmitter batteries and the manual. With a 14 years+ age marking and a single-vehicle setup, the X-Crawlee Pro 3.0 suits focused crawling sessions where line choice, throttle control and steering precision shape every climb.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Ryken, RC buggy, 100% RTR 4WD

€199.99

The 1:10 XS Ryken brings fast off-road running into a compact RTR format, pairing a 550 brushed motor with permanent 4WD for direct launches and steady pull across mixed terrain. At 410 x 300 x 175 mm and 1741 g, the buggy carries a broad, planted stance that suits dirt tracks, gravel paths and uneven ground. Power reaches the wheels through hardened steel drive shafts and a central steel cardan shaft, while front and rear metal differentials with sealed steel bevel gears keep the drivetrain precise under load. A chassis mounted on ball bearings supports efficient running, and the splashproof housing and electronics keep light rain and wet ground from stopping the session. The rear wheelie function uses targeted torque and traction control to lift the front end under acceleration, adding a distinct driving character beyond straight-line speed. A rear spoiler and rollover cage complete the body with added protection for the shell and electronics during tip-overs. The 100% RTR setup arrives pre-assembled with a 2.4 GHz remote control system, a 7.4 V 2600 mAh drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. That makes the XS Ryken ready for immediate running on open ground, from compact backyard courses to rougher off-road stretches where grip, suspension travel and drivetrain control all come into play.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Ryken, RC car, 100% RTR 4WD blue

€199.99

The 1:10 XS Ryken brings off-road action into a 410 mm long RC car with a wide 300 mm stance, 175 mm height and a ready-to-run setup built for immediate driving. Its blue body sits over a layout tuned for rough ground, where the combination of 4WD and generous clearance gives the chassis the grip needed for loose tracks, uneven paths and dusty sections. Power comes from a 550 brushed motor paired with a 7.4 V 2600 mAh Li-Ion drive battery, delivering up to 40 km/h and around 12 minutes of driving time. The hardened steel drive shafts transfer power with minimal play, while the sealed steel differential gears support clean, direct drivetrain response when dirt and vibration build up. The integrated wheelie function adds a distinct handling character by managing torque and traction so the front end can rise under acceleration. Oil-damped suspension helps the car settle after bumps and keeps the tyres working across broken surfaces. As a 100% RTR model, the set includes the ready-to-run vehicle, a 2.4 GHz remote control system, the drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. With a weight of 1741 g, the chassis carries enough presence for stable running on open ground, gravel stretches and wet outdoor surfaces where splashproof electronics matter.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 4WD 100% RTR

€199.99

The 1:10 XS Tekuro brings fast off-road driving into a 410 x 300 x 175 mm format with permanent 4WD, a high-torque 550 brushed motor and a top speed of up to 40 km/h. Grey and green bodywork, 110 mm monster tyres and a raised stance give the model a strong trail-ready presence before the first run even starts. Its drivetrain is built around a central steel cardan shaft, reinforced steel drive shafts at the front and rear, and metal differentials with steel bevel gears on both axles. Ball-bearing mounting throughout supports efficient running, while the XT60 high-voltage plug system and quick-change battery holder simplify battery swaps between sessions. The 8 kg steering servo uses a metal gearbox and water-protected construction, matched with splash-protected electronics and a water-protected 2.4 GHz radio system. The included 2600 mAh 7.4 V Li-Ion battery supports about 15 minutes of driving time, and the complete RTR setup keeps preparation focused on charging and heading out. At 1741 g, the chassis has the planted feel needed for dirt paths, gravel sections and uneven ground. Tight turns, short bursts of acceleration and repeated launch attempts all suit the Tekuro's mix of traction, suspension travel and wheelie-ready rear setup.  Warning! Not suitable for children under 14 years.

Models & trailers

1:12 MB Unimog U300, RC truck, 100% RTR

€199.99

The MB Unimog U300 has long been known as a compact utility truck with strong off-road credentials, and this 1:12 RC version carries that working character into a fire brigade layout with covered rear bed, roof beacons and front LED lighting. At 450 mm long, 220 mm wide and 260 mm high, the model brings a substantial road presence while staying manageable for regular driving sessions. The fully assembled chassis is ready to run with a powerful electric motor, digital proportional control and a 2.4 GHz remote control unit. Steering and throttle inputs can be adjusted progressively, which gives the truck a more controlled feel than simple on or off commands when lining up turns or easing over rougher ground. The included 7.4 V 850 mAh Li-Ion drive battery supplies up to 60 minutes of driving time, and a USB charger is part of the set. Horn and motor sound can be triggered from the transmitter, adding another layer of interaction during runs. With a vehicle weight of 2052 g, the model has enough substance to suit its utility-truck character. Fire brigade markings, the covered cargo area and the upright Unimog proportions make this RC truck fit naturally into rescue-themed driving scenes, yard layouts or obstacle courses with gravel, paving and mixed surfaces. The included transmitter batteries complete the 100% RTR setup, so the model can head straight into its first run after charging.

Basic accessories

1:14 2-Axle Boxed Trailer, model kit

€589.99

A 2-axle box trailer is a familiar sight in road freight, built to carry cargo in a closed body while keeping the load protected on the move. This 1:14 model kit brings that transport format into a detailed build with a laser-cut steel frame, a box body with CNC-milled aluminum parts, and the long, clean proportions of an enclosed trailer behind a tractor unit. The chassis uses 3 mm and 1 mm steel, while the bogie is formed from sheet steel in a sandwich structure. Wide chromated wheels run on ball bearings and carry wide tyres, and steel underride protection sits on the left and right sides. At the rear, an 8 mm aluminum bumper adds another machined metal detail, and a 1:14 trailer splash guard completes the lower section. The body measures 545 mm in length, 195 mm in width, and 290 mm in height, with a total weight of 4,800 g. Assembly is required, with a stated assembly time of 600 minutes. In use, the rear loading door opens on aluminum hinges through 270°, and magnets handle the door locking. Coupled behind a suitable 1:14 tractor unit, the enclosed body suits scale logistics scenes, articulated truck displays, and workshop builds that focus on metal construction, moving parts, and realistic trailer proportions. The kit includes instructions.

Models & trailers

1:14 2-Axle Dump Semi-Trailer, trailer

€589.99

Built in 1:14 scale, this 2-axle dump semi-trailer brings the look of a full-size tipper into a model-building format with a rigid PVC body, a CNC-milled aluminum frame and a 4-wheel layout. The silver dump body, black chassis and raised front platform create the working profile of a road-going bulk trailer, whether coupled to a tractor unit or parked on its support legs. The assembly kit focuses on mechanical detail rather than simplified styling. Vertical body panel lines, mudguards, rear underrun protection and ladder elements give the trailer a technical finish, while the king pin can be adjusted to suit the setup. The chassis uses new axles with 8 mm lift, and the rear section is shaped around a mechanically unlocking tailgate for realistic unloading action when a tipping function is installed separately. 7-chamber taillights and dummy air spring details extend the scale appearance across the rear and underside, and the ball-bearing wheel setup supports smooth movement during handling. On a workshop shelf, in a truck yard scene or behind a matching 1:14 tractor, the semi-trailer adds a strong construction-transport theme with visible engineering throughout the frame and body. Assembly kit and manual are included. A spindle drive, motor, battery, switch, radio gear, a charger and paints are required separately for expanded functions and finishing.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-Axle Dump Trailer, trailer kit

€519.99

The 1:14 2-Axle Dump Trailer brings working tipper style into a scale truck setup with a tandem-axle layout, a gray rigid PVC dump body and a steel profile frame with laser-cut, laser-welded construction. Built as an assembly kit, it focuses on the mechanical character of a real dump trailer, from the drawbar and support leg to the rear gate area and underbody linkage. The chassis uses 8 ball bearings across the wheel setup, giving the running gear a more precise feel as the trailer rolls behind a compatible tractor unit. Fulda Variotonn wide offroad tyres and the trailer axle with air ride dummy push the model further toward commercial-vehicle realism, while the 7-section tail lights add a recognisable rear-end detail. The automatic back wall locking with 2-hook design gives the rear section a functional finish that matches the tipper concept. The support leg keeps the trailer upright when detached, and the drawbar with hitch eyelet completes the classic central-axle trailer layout seen in heavy haulage scenes. On the bench, the kit offers a focused build around frame, axle and body assembly. Once finished, the trailer suits construction, transport and unloading scenes in 1:14 scale layouts, whether parked as a standalone model or coupled into a larger truck combination. Age 14 Years. Spindle drive, gear box motor, a control switch and paints are required separately.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-Axle Material Trailer, trailer kit

€574.99

Built for 1:14 truck scenes, the 2-Axle Material Trailer brings a long loading bed, twin-axle layout and working drop-side bodywork into a scale transport build with a clear commercial look. The grey panel sides, dark front bulkhead and wood-look floor give the trailer the character of a real material hauler, whether it is coupled behind a road tractor or parked at a loading point. The kit structure goes beyond a simple rolling chassis. The assembly sequence includes 2 axle units, a pivoted bogie, a main frame with crossmembers, mudguards, underride protection, rear bumper parts and upright posts around the bed. Ball bearings are fitted into each wheel hub, and the axle geometry offers normal height or a +8 mm position during assembly. Rear light housings are part of the build, and the manual also shows optional LED taillight boards as separate accessories. A spare wheel holder and additional fittings are listed as optional accessories rather than included contents. Once assembled, the trailer suits realistic loading and transport layouts in 1:14 scale, from building-material scenes to depot and yard setups. The opening side panels and rear section support a more active display style, while the detailed underframe, mudflaps and side protection parts give the finished trailer convincing presence from low viewing angles.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-axle Riedler, stanchion trailer

€509.99

The 1:14 2-axle Riedler stanchion trailer brings timber-haul detail into a scale transport setup with a steel sandwich frame, solid aluminium stanchions and a long, purposeful silhouette. At 620 x 190 x 305 mm and 2,600 g, the trailer adds real presence to a model road train while reflecting the look of the full-size Riedler vehicle named in the licence. Its mainframe uses 3 mm and 1 mm sheet steel parts that are laser cut and CNC bent, and the bogie follows the same sandwich construction for a consistent mechanical layout. The mounted bogie is adjustable and uses sliding pads to support manoeuvring through tighter course sections. A one-piece drawbar in fibre-reinforced plastic carries a chequer plate application and is held at a coupling height of 75 mm by 2 springs. The semitrailer axle includes dummy pneumatic springs, while the left and right underride guards and the CNC-milled rear bumper add further metal detail. The stanchion holders can be loosened with 2 grub screws, then repositioned or removed to suit different loading arrangements for logs or other long cargo. Ball-bearing mounted chromium wheels with wide tyres, mudguard splash protection, bumper mud flaps, a licence plate holder and 7-compartment rear lights build up the finished transport character. A decoration set is included. Age 14 Years. The Carson towing coupling 500907182 is required separately for use on the TAMIYA Volvo FH16 tractor unit.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 20Ft. Sea-Container, kit, trailer load

€199.99

Freight containers shaped modern transport with a standardised form built for road, rail and port handling. This 1:14 20Ft. Sea-Container Kit brings that familiar cargo silhouette into a scale truck setup with a 432 mm length, 180 mm width and 185 mm height. The structure combines an anodised silver aluminium frame with plastic sheet body sections that reproduce the look of a traditional container. Corrugated surfaces, corner details and the separate frame layout give the model the character of a working freight load rather than a plain box shape. The plastic panels are paintable, which supports custom liveries, fleet styling or a weathered finish that matches a chosen tractor unit and trailer combination. At the rear, the doors are movable and fitted with a locking mechanism, so the handling detail is part of the build rather than only a visual effect. The container is designed for the 2 axle container semi-trailer 500907334 and locks to the chassis via twist-locks. That mounting method reflects the technical logic of full-size container transport and helps the model sit naturally in logistics, harbour or long-haul display scenes. 14 Years marks the recommended age.

Models & trailers

1:14 20Ft. Semitrailer, trailer kit, tandem axle

€274.99

Built around a 1:14 scale layout, the 20Ft. Semitrailer kit brings container transport style into a detailed truck setup with a black anodised aluminium frame and a compact tandem-axle format. The 475 mm long chassis creates a clear, purposeful silhouette behind a tractor unit, while the 180 mm width and 135 mm height keep the proportions aligned with scale road-haulage scenes. The running gear combines swing axle suspension with flat springs, giving the underframe a more technical, model-engineered character than a plain static trailer base. Tyres with foam inserts add substance to the wheel setup and support a fuller tyre shape on the rims. Mechanical seat posts strengthen the parked semitrailer look at the front section and add another visible chassis detail for display or workshop scenes. The open kit format also leaves room for a container-focused build concept rather than fixing the trailer to a single body style from the outset. Coupled to a matching truck, the semitrailer suits freight yard layouts, road transport displays and scale driving sessions built around container handling themes. A suitable lamp set, 300056502, is available for builders who want to extend the trailer with matching light equipment. Age 14 Years

Models & trailers

1:14 3-Axle Flatbed Trailer III, trailer

€539.99

Heavy transport takes shape in 1:14 scale with the 3-Axle Flatbed Trailer III, a detailed kit built to pair with TAMIYA tractors. The long platform, solid front wall and multi-axle layout give the model the look of a working road trailer ready for oversized loads, machinery or palletised cargo. The chassis uses a laser-cut steel frame in 3 mm and 1 mm material, supported by a massive aluminium front wall and steel underride protection on the left and right sides. A bumper made from 8 mm aluminium adds another strong visual and structural element at the rear. The loading area measures 981 mm in length, with an overall width of 195 mm and height of 210 mm, giving the trailer a notably long deck in this scale. At 4,400 g, the assembled model carries a substantial presence on display and in convoy scenes. The new trailer suspension can be built at normal height or with the included +8 mm elevation, adding flexibility to the finished stance. The real wood deck surface and recessed fastening points suit scale freight setups, from construction loads to industrial transport scenes. Ball-bearing wheels support smooth rolling movement, while the spare wheel mounted in its steel holder strengthens the authentic commercial-trailer look. Age 14+ marks the recommended age. The trailer can also be expanded with separately available accessories, including a conversion kit with functional aluminium side walls for building-material transport.

Models & trailers

1:14 3-Axle Fliegl Megarunner, trailer kit

€634.99

Curtain-side trailers shape the look of modern road freight, and the 1:14 3-Axle Fliegl Megarunner brings that transport character into a detailed model-building project. The assembly kit captures the long, low stance of a European semi-trailer with a 995 mm length, a 195 mm height and a red curtain body that stands out clearly beside the white front and rear sections. The build centres on a laser-cut steel frame, steel front wall and 3-axle layout, creating a technical structure with the layered detail that model-building enthusiasts look for in workshop sessions. Along the sides, the curtain body is tensioned with multiple fasteners, while the rear section uses opening doors with a 270° hinge layout for a more authentic trailer finish. Half-round mudguards, a single-arm steel spare wheel carrier and aluminium underride protection add the kind of hardware normally seen underneath full-size transport equipment. The rear bumper carries a laser-cut Fliegl logo, and the wide tyres with chromed rims complete the road-going stance with a bright contrast against the darker chassis parts. On a shelf, in a depot scene or coupled to a 1:14 tractor unit, the trailer adds a strong logistics presence through its triple-axle proportions and curtain-side bodywork. The kit format makes the construction itself part of the appeal, with the manual included for step-by-step assembly.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Low Loader, trailer, gooseneck

€849.99

Heavy-haul trailers are defined by their proportions, and this 1:14 3-axle low loader captures that look with a long low-bed platform, a stepped gooseneck front section and a rear triple-axle group. The red frame, wood-look centre deck and black running strips create the technical contrast seen on full-size transport equipment, whether the trailer is coupled to a matching tractor unit or shown as a standalone workshop build. The construction goes beyond a simple shell. The manual shows 6 wheel assemblies with ball bearings, a multi-part frame with cross members in 74 mm and 81 mm lengths, and deck sections that lock into place across the chassis. Rear details such as warning boards, mudflaps, lights, hazard markings and LONG VEHICLE graphics build the road-going character of the model. The trailer also supports optional upgrades including a spindle drive gearbox motor, a control switch for the lifting mechanism, LED tail light boards, rectangular lights and an orange flashing beacon. On a finished 1:14 truck combination, the low central bed suits scale transport scenes with construction machines, agricultural vehicles or other oversized loads. The long deck and realistic rear section also make the model a strong centrepiece for shelf display, depot layouts and heavy-transport dioramas. Required separately are a gearbox motor for the lifting device and a control switch for manual lifting.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Semi-Trailer Ver.III, trailer

€689.99

The 1:14 3-Axle Semi-Trailer Ver.III recreates the long, enclosed form of a box trailer with a white body, red chassis and a detailed 3-axle layout that gives a truck combination a convincing road-going presence. Extended support legs at the front let the trailer stand detached, while the wide rear opening sets up loading scenes with the doors swung fully outward. Details across the chassis and body focus on the hardware that defines a working trailer. The side panels use a screwed sandwich-look construction, and the semi-circular mudguards frame the rear wheel area with a clean commercial-vehicle profile. At the back, an aluminum rear bumper carries 7-section taillights for a technical finish that matches the transport theme. A steel spare wheel holder with spare wheel adds another workshop-style detail to the underframe, and the manually adjustable aluminum trailer support legs underline the functional character of the model. Combined with a compatible 1:14 tractor unit, the trailer suits realistic freight setups, depot scenes and road-train display builds. Open rear doors, visible cargo space and the multi-axle chassis also make it a strong centrepiece for transport layouts focused on loading bays, yard parking and long-haul combinations. Age 14 years+  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Stanchion Trailer, logging trailer

€599.99

Built around a 1:14 scale and a 3-axle layout, this stanchion trailer brings the look of a dedicated timber hauler into a detailed model format. The red chassis, silver stanchions and black fenders create the unmistakable profile of a forestry transport trailer, with the long frame set up to carry elongated loads such as logs or poles in a convincing road-going arrangement. The structure develops through a multi-stage build with 6 wheel assemblies, ball bearings in the wheel hubs and 3 axle units mounted beneath the frame. The suspension uses a new design, and the axle build includes a choice between normal height and a raised +8 mm position. Dummy air suspension details add another layer of scale realism around the running gear. Side underrun guards, a rear bumper, rear light details and a front holder with front plate shape the trailer into a complete heavy-transport subject rather than a simple rolling chassis. On the bench or coupled into a 1:14 truck setup, the trailer suits display scenes centered on forestry, construction or long-load transport. Support legs hold the trailer upright when parked, while the front bulkhead and paired stanchions define the loading zones clearly for a purposeful finished look.

RC truck accessories

1:14 3-Chamber Taillight PCB, RC lighting set

€80.99

Compact rear lighting adds a sharper scale finish to 1:14 vehicle builds, and this 3-chamber taillight PCB set brings that detail into a small round format. With dimensions of 11 x 7.5 mm, the units suit model bodies and rear sections where lighting needs to stay visually balanced instead of overpowering the build. The PCB layout combines 3 light functions in each taillight: rear light, indicator and brake light. That function mix supports more lifelike signalling on trucks, trailers and custom conversions, while the round housing shape fits classic rear-end styling on many commercial vehicle projects. The set is designed for an input voltage of 7.2-12 V DC, making it suitable for RC electrical systems within that range. For model-building enthusiasts, this adds a focused electronics upgrade that contributes visible function as well as scale character. Installed on a 1:14 rig, the taillights help complete the rear view during workshop builds, restoration-style projects or detailed road-going truck scenes. The set is not compatible with TAMIYA MFC-01/03, so it is best matched with other suitable lighting layouts and custom electronics setups.

Models & trailers

1:14 3Axle Trailer Chassis Ver.III, trailer

€389.99

The 1:14 3Axle Trailer Chassis Ver.III captures the look of a heavy road trailer in a format shaped for model-building enthusiasts. Its laser-cut steel construction uses 3 mm and 1 mm sections, creating a rigid base chassis that suits custom builds and gives larger trailer bodies a defined structural foundation. The 3-axle layout brings the long proportions of a transport trailer into a scale setup that looks convincing behind a truck tractor. A new trailer suspension system is part of the chassis design, and the included +8 mm elevation option allows the running height to be adapted to the planned structure above. Wide chromed wheels with ball bearings and wide tyres underline the technical look while supporting smooth rolling movement. At the rear, an aluminium bumper with 7-section taillights adds another recognisable truck detail. The steel spare wheel holder with spare wheel extends the workshop-style equipment, while the semi-circular mudguards shape the wheel area with a clean trailer silhouette. As a basic trailer chassis for individual structures, this version leaves room for flatbed, transport or specialist body concepts built around the frame. On a shelf, in a workshop setting or coupled to a matching 1:14 tractor unit, the long red chassis and detailed under-run protection create a strong heavy-haul presence.

Additional accessories

1:14 Box Body Conversion Kit, model kit

€399.99

This 1:14 box body conversion kit reshapes the TAMIYA Volvo FH16 timber truck 300056360 into an articulated truck with a closed cargo body. CNC-milled aluminium parts form the main box structure, while the combination of metal sections and panelled surfaces gives the finished build a purposeful commercial-truck character. A sheet steel subframe, laser cut and CNC bent, is included for mounting on the chassis and creates the structural link between the conversion and the base vehicle. The side sections use screwed plastic panels in a sandwich layout, which adds visible layering to the bodywork instead of a plain flat-sided shell. At the rear, the loading doors are carried on aluminium hinges with a 270° opening angle, allowing the opening mechanism to be shown clearly on the completed model. Magnetic locking keeps the doors closed when the body is in running or display condition. The assembled body measures 545 x 195 x 195 mm and weighs 3,200 g. As a model kit, this conversion suits hobby builds that focus on reworking an existing truck into a different transport configuration. The box body changes the visual character of the Volvo FH16 from timber hauler to enclosed freight carrier and adds a substantial new body section for workshop assembly and finishing.

RC truck accessories

1:14 Chrome Bumper MB 1838/1850, truck part

€12.49

Classic truck styling often comes down to the front details, and this 1:14 Chrome Bumper MB 1838/1850 adds a bright plated accent to compatible model builds. Designed as an accessory for Mercedes Benz truck models 56305 and 56307 from Tamiya, it brings the specified MB 1838/1850 look to the front section in a format matched to 1:14 scale projects. The bumper is made from chromed material and focuses on exterior appearance rather than a generic replacement look. Its shaped front profile and integrated mounting points are intended for the named compatible truck models, which keeps the fitment use clearly defined in the product data. The included fixing hardware consists of 2 black screws, giving the set the essential parts needed for installation. As a model accessory in the Models Supplies range, it suits detail-focused truck projects where the front end finish plays a visible role in the overall build. On a workshop bench, the plated surface adds contrast against painted cab parts and darker chassis components. In a display setting or as part of an active RC truck build, the bumper helps complete the characteristic road-truck appearance associated with the MB 1838/1850 designation.

RC chassis & attachments

1:14 Clearance Lights, model accessory, 2 pcs

€11.49

Marker lights are a small detail with a big visual role on scale trucks, and this 1:14 clearance light set brings that road-going look into a model build with red and amber lenses. The set contains 2 pieces and is listed as a model accessory for hobby use. Its compact format suits detailing work where edge markers help define the outline of a cab, body or trailer in scale form. The red and amber colour combination follows the stated design and creates a clearer visual break between body panels and fitted trim. As a separate accessory, the set can support a fresh build, a repair, or the replacement of existing marker parts where the original look needs to be restored. The 1:14 scale keeps the proportions aligned with matching model projects rather than forcing an oversized lighting detail into the build. On the bench, the set fits naturally into finishing stages where small exterior parts shape the final appearance. In display use, the coloured markers add another layer of realism to trucks and trailers that rely on visible body details rather than large mechanical changes alone.

RC truck accessories

1:14 Clearance Lights, model accessory, 2pcs

€11.49

Marker lights are a small detail with a strong effect on the finished look of a scale vehicle, and this 1:14 clearance light set brings that effect into model builds with a red and white 2-piece layout. The compact format suits focused detailing work on truck and trailer bodies where visible light points help define the lines of the model. The set is listed as a model accessory and is aimed at hobbyists from 14 years. Red and white light elements open up classic placement options on body edges, upper sections or rearward areas, depending on the build concept and the styling of the vehicle. Because the pack contains 2 pieces, the set works well for selective upgrades rather than broad full-body outfitting. That makes it a useful choice for custom projects, replacement work or finishing touches on a scale body that still needs clearly placed marker-light details. On the workbench, the accessory can be integrated into truck, trailer or other 1:14 modelling projects where small exterior parts shape the overall impression. In display use or during driving sessions, the added light housings help the bodywork read with more scale definition and a more complete road-going look.

RC truck accessories

1:14 Day Running Light Actros 2/3 Axle

€65.99

The MB Actros remains one of the defining shapes in modern long-haul trucking, and this 1:14 daytime running light set brings that road-going character into a scale build with a model-specific front lighting detail. Made for MB Actros 2/3 Axle models, the set focuses on the visual signature at the front end and adds a cleaner, more technical look to the truck body. The accessory is designed as a paired lighting set with wired left and right units, matching the mirrored layout needed for the vehicle front. Its 7.2 to 12 V/DC input range gives clear electrical guidance for integration into compatible RC truck systems. The compact housings are shaped for installation as dedicated light components rather than as generic decoration, which makes the set especially relevant for builders refining the appearance of an existing model or replacing front lighting parts with the correct format. On a workshop bench, during a rebuild, or as part of a scale detailing session, this lighting set adds a focused upgrade to the MB Actros 2/3 Axle platform. It suits display-oriented finishing as well as active RC truck projects where the front-end layout matters as much as the driving setup.

RC truck accessories

1:14 Draw Tube Pole Trailer, model accessory

€89.99

This 1:14 Draw Tube Pole Trailer accessory set brings a functional trailer detail into model-building projects with a long cylindrical draw tube, a rectangular silver housing section and an angled mounting plate with 4 round holes and 2 elongated slots. The layout reads as a dedicated add-on for scale truck or trailer work, with each part focused on mounting, alignment and visible structure rather than decoration alone. Alongside the main tube section, the set includes 2 small silver detail parts, a black bracket and a bag of black and silver screws for the fitting work. The combination of slotted and round mounting points supports careful positioning during assembly, while the separate hardware keeps the installation tied to the mechanical character of the build. A red transparent 2-part light piece and a clear lens frame extend the set beyond the structural section, adding a realistic rear-end detail that complements the metallic-looking components. 14 Years is the stated age marking. On a workshop bench, the parts suit upgrade, replacement or custom trailer projects where a scale-correct extension section matters as much as the finished look. Assembly time is stated in minutes, and batteries are not included.

Models & trailers

1:14 Dump Trailer 2/3 Axle, model kit

€619.99

Built for model truck scenes with real working character, this 1:14 dump trailer model kit brings the look of a construction-site semi-trailer into a detailed three-axle format. The combination of a CNC-milled aluminium chassis, reinforced PVC basin and back wall, and a lightened licence plate mount gives the trailer a technical, workshop-style finish that suits display builds and active driving alike. The running gear uses GFK suspension with horizontal rods, 12 ball-bearings, 6 wide rims and 6 wide tyres with a width of 25 mm and an outer diameter of 82 mm. Air-spring dummies with screw springs add another layer of scale detail to the undercarriage, while plastic fenders with mounts frame the wheel setup cleanly. The aluminium underbody protection and the CNC-milled support construction continue the metal-focused build, and the mechanically adjustable trailer supports add a functional detail at standstill. With a length of 700 mm, width of 185 mm, height of 235 mm and a weight of 4,600 g, the trailer has substantial presence in a 1:14 truck setup. For unloading scenes, the basin can be equipped with a separately available dump mechanism. A spindle drive, motor, battery and switch are required separately. Once fitted, the raised basin and automatic rear locking create a convincing loading and unloading sequence for sand, gravel or stone in construction layouts, quarry scenes or truck meeting displays.

Models & trailers

1:14 Fliegl Stone Master, tipper trailer

€749.99

Current half-pipe tippers are defined by fast unloading and a hard-working silhouette, and the 1:14 Fliegl Stone Master brings that character into a detailed 3-axle trailer kit. The licensed model combines a steel chassis frame with a steel tipper body and rear wall, creating a substantial build with the long, purposeful proportions of a site trailer. The chassis uses laser-cut and laser-welded 1 mm and 3 mm steel parts, while the tipper and hatch door are formed from 2 mm steel with a CNC-bent profile. Across the running gear, 12 ball bearings sit inside the 6 wheel assemblies for smooth rolling action. The trailer suspension is detailed with air spring dummies, and the rear section carries a 7-section taillight layout, a licence plate bracket and a square steel rear underride guard. Semi-circular mudguards, a king pin, an ABS operating platform and a hydraulic cylinder dummy add further scale detail without crowding the lines of the body. The 7-section rear light cluster can be electrically retrofitted. With dimensions of 700 x 185 x 250 mm and a load figure of up to 10 kg, the trailer has the size and carrying capacity to suit construction layouts, transport scenes and scale hauling setups. The body can be tipped and unloaded with the separately required tipping mechanism. A spindle drive, motor, battery and switch are required separately.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 Goldhofer BAU STN-L3, low loader kit

€584.99

Heavy-haul transport has a distinct presence in scale form, and the Goldhofer BAU STN-L3 brings that character into a 1:14 low loader kit with a long 1000 mm body, a width of about 200 mm, and a height of 270 mm. The laser-cut, hard-soldered steel profile construction gives the trailer its technical look, while the plateau with tailgate extends the transport layout for detailed truck scenes. The build centres on mechanical functions that suit model-building enthusiasts. The split folding loading ramps are arranged in 3/4 and 1/2 sections and can be folded down by hand for driving operation. A ramp length of 290 mm in the raised configuration is stated in the data. Three rear axles carry twin tyres, and the axle area is detailed with dummy air springs for a scale heavy-duty appearance. Ball bearing mounting supports the running gear, and the 7-chamber taillights can be retrofitted electrically. All columns are mechanically adjustable, and the front support area can be expanded with optional E-support legs. The trailer fits all Tamiya trucks, making it a strong match for detailed tractor units in 1:14 truck layouts. On a workshop bench, in a transport diorama, or coupled for slow manoeuvres with scale cargo, the low deck, upright ramp geometry, and multi-axle layout create the look of a working heavy equipment hauler. Age 14 Years  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 Goldhofer TU4, lowloader trailer, 4-axle

€694.99

Heavy-haul lowloaders are built to move machinery that sits too tall or too heavy for a standard trailer, and the Goldhofer TU4 captures that purpose in a long 1:14 scale platform with a distinctly low deck and 4-axle layout. This kit uses laser-cut steel sheet parts to create the frame and structure, giving the model a technical build with the look of a real transport trailer. The deck is finished with wood supports that break up the steel construction with a realistic loading surface, while 16 ball-bearing wheels add a dense multi-axle stance under the chassis. At the rear, the support can be adjusted manually, and the one-piece ramps connect through a hinged mechanism that allows different loading positions. The underframe includes spacers, semicircular fenders and a pivoting bogie arrangement, adding more mechanical detail during assembly than a simple display trailer. Decals are included for markings and finishing touches, so the completed model carries the visual character of a working lowloader rather than a plain platform. Coupled behind a matching 1:14 tractor unit, the trailer suits workshop display, transport dioramas and scale loading scenes with construction or agricultural vehicles. Age 14 Years. Assembly instructions are included.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:14 LED Board Side Volvo FH16, model accessory

€18.99

The Volvo FH16 is one of the defining names in modern long-haul truck design, and this 1:14 LED Board Side brings that road-truck character into a scale model build through a dedicated lighting accessory. As a model supply rather than a complete vehicle, it focuses on one specific visual area of the truck and adds a more defined illuminated presence to the side section. The product data identifies this part as a 1:14 LED Board Side Volvo FH16 2A, placing it in the models and accessories range and specifically in model supplies. That makes it a fitting choice for hobby projects built around scale truck detailing, where separate lighting components help shape the final appearance. The 2A designation is part of the stated name and helps distinguish this version within the range. Batteries are not included. The age marking is 14 Years. In a workshop setting, this accessory supports focused upgrade work on a Volvo FH16 scale truck, especially where lighting details are part of the planned finish. On a display shelf or during model operation, an LED side element can strengthen the visual definition of the body layout while keeping the build aligned with the stated 1:14 scale.

RC truck accessories

1:14 Lift Axle, conversion kit, trailer upgrade

€99.99

A lift axle is a defining detail on many full-size trailers, and this 1:14 conversion kit brings that function into a scale workshop project for CARSON 3-axle trailers of the II and III generation. Built for one trailer axle with dummy air suspension, the set converts it into a working lift system with a clearly visible axle movement of about 6 mm. The mechanism is driven by a digital servo and uses an aluminum servo mount, an aluminum servo horn, new mounting brackets, air bellows and mounts, plus a steel lift mechanism to create the lifting action. Mounting hardware is included for the installation. A suitable servo with at least 10 kg torque is required separately; comparable dimensions are 40 x 20 x 38 mm. The kit is compatible with Fliegl Megarunner, Stake trailer III, Flatbed trailer III, Trailer chassis III, Building materials trailer III, Box trailer III, and all 2nd generation trailers. Installation in tipper models is not possible. On a finished trailer, the raised axle changes the stance in a way that looks closer to a working road-going combination. In the workshop phase, the conversion adds a focused mechanical upgrade that suits model-building enthusiasts who enjoy functional trailer details as much as the final appearance.

RC truck accessories

1:14 Metal Front Axle, model part, steering

€19.99

A front axle defines both the stance and the steering layout of a scale truck build, and this 1:14 metal front axle with steering linkage brings those two core elements together in one dedicated model part. The metal construction gives the assembly a clearly specified material base for workshop use, while the included linkage ties the axle directly to the steering function named in the designation. Within a 1:14 build, a front axle is more than a visual detail: it is the component group that shapes how the front end is assembled and how the steering hardware is organised. This version is supplied as a front axle with steering linkage rather than as an isolated single piece, which helps keep the relevant steering section together for replacement or planned parts work. The designation identifies it as a model supply within the models and accessories range, making it a focused choice for maintenance benches, rebuild projects or scale-oriented truck assemblies. The age marking is 14 Years. Whether the task is replacing a worn front-end assembly, preparing a fresh chassis project or refining a detailed 1:14 vehicle, this axle fits naturally into hands-on hobby work. It suits model-building enthusiasts who value clearly defined components and a steering assembly that is named upfront in the specification.

RC truck accessories

1:14 MFC-TLS IR Low Loader, control unit

€84.99

Built for 1:14 truck modelling, the MFC-TLS IR Low Loader control unit extends TAMIYA MFC-03/01 with infrared signal transfer to a matching trailer setup. The module sends lighting and auxiliary commands from the tractor unit to the trailer, creating a clean functional link for low loader combinations with steerable axles. Power is supplied via the receiver at 5-7.4 V/DC, so the module integrates into an existing radio-controlled electronics layout without a separate power source stated in the data. Rear light circuit boards for 3-chamber or 6-chamber taillights connect through screw terminals, and each of the 7 outputs supports loads of up to 500 mA. That layout also leaves room for additional lamps such as marker lights, roof lights or wind deflector lights, which are switched through the parking light function. The package contents include the MFC IR transmitter module, an IR transmitting diode and a 5-pin cable set. In a detailed truck and trailer build, the unit supports coordinated light behaviour and extra driven functions across the combination. The control paths also cover steering-related trailer functions, making it suitable for low loader setups where steerable axles add a more involved operating sequence. Recommended age: 14 years. The TLS low loader control unit 500907712 is optionally required for the trailer.

RC truck accessories

1:14 Scania 770 Roof Lights, model accessory

€16.49

The Scania 770 stands out on the road with its tall cab format and strong front-end presence, and this 1:14 roof light board brings that character into a scale truck build with a focused lighting detail. Designed as a model accessory, it places 5 LED roof lights across the upper cab area to create a more defined silhouette on the finished Scania 770. The one-piece board format groups the 5 lights into a single roof-mounted assembly, which helps keep the layout consistent across the cab line. As a 1:14 accessory, it is shaped for scale modelling work where body styling and truck-specific detailing matter as much as the main chassis. The LED configuration adds a technical accent to the upper section of the model and gives the roof area a clearer visual structure than an unadorned cab top. The Scania 770 reference keeps the styling tied to a named truck subject rather than a generic lighting add-on. On the bench, the light board fits naturally into a detailed truck project alongside cab finishing and exterior upgrades. In display use or during scale driving sessions, the 5-light arrangement gives the model a more distinctive roofline and a stronger long-haul truck character.

RC truck accessories

1:14 Scania 770S Front PCB, truck lighting

€189.99

Modern long-haul trucks rely on their front light signature as much as on grille shape, and the Scania 770S is one of the clearest examples of that design language. This 1:14 front PCB lighting set translates that look into a dedicated lamp assembly for the TAMIYA Scania 770S, combining reflector detailing with functional illumination for a more authentic scale finish. The set is built around 2 matching front light modules with integrated wiring and PCB-based electronics. Each housing contains 16 LEDs, arranged to reproduce the reflector structure with a more realistic visual depth than a plain lamp insert. The lighting functions include daytime running light and side position light, adding separate illuminated zones that sharpen the truck's front profile. The specified input range of 7.2 to 12 V DC suits RC truck electrical systems in this class and gives clear compatibility guidance for installation planning. Mounted on the model, the lamp units bring more definition to the front corners, whether the truck is standing in a workshop-style display or running on an indoor course. For 14 Years and up, this accessory adds a technical finishing step that suits hobby builds focused on scale detail and working light functions.

RC truck accessories

1:14 Scania 770S LED Board Side, model part

€31.99

This 1:14 side LED board set is made for Scania 770S model builds and brings a defined lighting component to the truck's side sections. With 2 matching boards in the set, the layout suits symmetrical installation and gives the model a more complete illuminated appearance. The designation names a 3A specification, adding a concrete electrical reference for integration into a compatible lighting setup. As a dedicated model accessory rather than a complete vehicle, the set focuses on one specific area of the build and supports more detailed finishing work on a Scania 770S project. The side board format helps separate this component from front or rear lighting elements and makes it easier to plan placement within a larger 1:14 truck configuration. In a workshop setting, the pair can be fitted during a fresh build or used to refine an existing Scania 770S model with added side illumination. The clearly defined scale and vehicle reference also make the set a focused choice for hobbyists working on truck detailing with matching 1:14 components.

RC truck accessories

1:14 Scania 770s LED Board, model accessory

€32.49

The Scania 770 S belongs to the latest generation of long-haul trucks, known for its bold front design and strong road presence. This 1:14 LED board is made for that look in model form, adding a defined lighting element to the front area of a Scania 770s build. The accessory is specified as a 4+3 front LED board, giving model-building enthusiasts a clear layout for cab detailing rather than a generic light part. In a 1:14 truck project, details at the grille and roofline shape the whole character of the finished replica, and this board focuses attention on that upper front section. The Scania 770s designation keeps the part tied to a specific subject, which matters when a build is planned around the lines and proportions of one truck model. As a model accessory rather than a complete vehicle, it suits hobby benches where selected parts are added step by step to develop a more individual finish. Whether the goal is a shelf display, a show-style truck replica, or a running 1:14 build with extra visual definition at the front, this LED board adds a distinct custom element. The compact format also makes it a useful choice for targeted upgrades where one visible detail can change the overall impression of the cab.

RC truck accessories

1:14 Scania 770S Positionlight Set, LED kit

€85.99

The Scania 770S is known for its bold front-end presence, and this 1:14 position light set translates that character into a dedicated LED upgrade for scale truck builds. With 21 LEDs and support for 7.2 V and 12 V systems, the set is aimed at model-building enthusiasts who want to add a more intricate lighting layout to a Scania 770S project. The wiring harnesses are arranged for several mounting points around the truck body, with light outputs assigned to roof lamps, side skirt position lights and multiple front lighting locations. Alongside the roof position lamps with high beam function, the set also covers 5 lightbar pods, a bumper lightbar and an auxiliary light in the radiator grille. This spreads the illumination across upper, central and lower sections of the cab, giving the model a more structured and realistic light distribution once installed. The prewired LED lines also support neat routing through a detailed truck build where cable placement matters as much as the finished effect. On a display shelf, in a workshop build, or during powered running sessions, the set adds visible definition to the Scania 770S bodywork and helps separate the truck's key styling zones through light placement. The set is not compatible with TAMIYA MFC-01/03.

RC truck accessories

1:14 Steel Drive Shaft 47-57 mm, model part

€17.49

A steel drive shaft in 1:14 scale format brings a core drivetrain component to compatible model vehicle builds. The stated 47-57 mm length range defines the working span clearly, making this part relevant wherever that exact distance is needed between connected drivetrain points. As a model accessory in the Models & Accessories range, this shaft is aimed at repair, replacement, or planned drivetrain setup work rather than decorative use. The steel construction places the focus on a metal transmission part for hobby applications, and the compact 47 mm to 57 mm specification gives a concrete reference when matching an existing assembly. With a minimum age marking of 14 years, the part sits in a hobby context shaped by model-building and technical maintenance. The designation itself keeps the function straightforward: drive shaft, steel construction, 1:14 scale reference, and a defined length window. On the workbench, this kind of spare part supports routine servicing of compatible RC models, whether an existing shaft is being replaced or a drivetrain layout is being completed with the required size. It also fits neatly into a stocked parts assortment for ongoing maintenance of 1:14 vehicle projects.

RC truck accessories

1:14 Steel Drive Shaft 55-67 mm, model part

€17.49

This 1:14 steel drive shaft is a focused drivetrain part for model-building enthusiasts working on compatible vehicle setups. With a stated length range of 55-67 mm, it covers a clearly defined fit window for installations that call for this span between connected drivetrain points. As a models supply component, the shaft belongs in repair, maintenance and parts replacement work where the original drivetrain hardware needs a matching steel spare. The 1:14 designation places it within scale-specific model applications rather than as a general workshop part. Steel construction keeps the material statement precise and relevant for a component that sits within the drive system. The 55-67 mm format gives a concrete reference for checking fit against an existing assembly before installation. Age marking: 14 Years. On the hobby bench, this part suits rebuilds after wear, planned drivetrain servicing or a fresh parts stock for compatible 1:14 models. In running fleets that stay active over repeated sessions, a correctly sized replacement shaft helps keep maintenance work targeted and scale-specific.

RC truck accessories

1:14 Steel Drive Shaft, model part, 75-100 mm

€17.49

This 1:14 steel drive shaft is a dedicated drivetrain part for model assemblies that need an adjustable connection length from 75 to 100 mm. The steel shaft brings a clear mechanical role into the build, linking compatible drivetrain points within that stated span and supporting a precise, component-led setup. In a 1:14 model context, the 75 to 100 mm format gives room for installations where the distance between connected parts is not fixed to a single length. That makes the shaft relevant for replacement work as well as for fresh assemblies built around matching dimensions. The steel construction keeps the focus on the part's intended function as a drivetrain link rather than a decorative add-on. With the age marking of 14 Years, the part sits in a hobby-focused model range shaped around detailed builds and technical component choices. Whether used to replace a worn drivetrain link or to complete a compatible 1:14 project, the shaft fits naturally into workshop-style model building sessions. It suits hobby benches where measured component selection, matching dimensions and drivetrain layout all matter to the finished assembly.

RC truck accessories

1:14 Steering Axle, truck accessory, steel

€99.99

In 1:14 truck building, the steering axle shapes how the whole front end responds on the road. This pre-assembled front axle combines a hardened steel center section, hardened steel steering knuckles and aluminum linkages into a ready-to-install unit for TAMIYA truck models. The axle body forms the core of the assembly, while double plain-bearing-mounted steering knuckles support precise steering movement at each side. A steel tie rod with left- and right-hand threads allows fine tracking adjustment directly at the linkage, which helps dial in the front end with more control during setup. Backlash-free M3 ball joints transfer the steering motion through the system with accurate, direct action. The combination of steel load-bearing parts and aluminum linkages gives the assembly a focused mechanical layout built around steering precision. Installed on compatible TAMIYA truck chassis, the axle suits fresh builds, rebuilds and targeted front-end upgrades where exact steering response matters. The ready-for-installation format also keeps workshop time focused on fitting and setup rather than on assembling the axle itself.

RC truck accessories

1:14 Strobe Light orange, model accessory, 2 pcs

€45.99

Amber warning lights are a familiar detail on working trucks, and this 1:14 strobe light set brings that look into a model build with 2 compact light units. Each housing measures 11.5 x 4.5 x 2.5 mm, giving the set a small footprint that suits scale installations where lighting needs to stay in proportion to the bodywork. The lights are designed for 7.2-12 V DC input and come as orange strobe units for model electrics in that voltage range. The image shows slim silver housings with attached wires, a layout that supports installation on body sections, roof areas or accessory bars where a separate warning-light detail is needed. Compatibility with the 500907633 beacon light bar set makes this set a focused extension for existing 1:14 truck lighting projects rather than a generic decoration. Used on a show truck, service vehicle or detailed working rig, the 2 strobe lights add a distinct visual accent that sharpens the scale appearance. In custom builds, restorations or lighting upgrades, the compact format leaves room for precise placement while the amber colour reinforces the look of real commercial vehicle warning equipment.

Basic accessories

1:14 Towing bar Low loader, model accessory

€26.99

This 1:14 towing bar for the Low loader adds a defined structural part to scale model work, with a black moulded form that follows an A-shaped layout and integrates reinforcing ribs across the frame. The geometry shown in the part itself points to a mechanical connection role, with 1 circular mounting eye on one end and 2 cylindrical mounting points on the other for placement in the intended assembly. As a dedicated model accessory in the Models & Accessories range, the part suits replacement work, maintenance tasks or the completion of an existing 1:14 Low loader setup. The ribbed structure gives the component its formed profile, while the open triangular shape keeps the connection points clearly accessible during fitting. For hobby projects where the correct shape matters, a scale-specific part like this helps keep the model configuration consistent with the intended layout. The 14 Years age marking places the towing bar in the hobby segment rather than in early-play ranges. It fits naturally into bench work focused on repair, parts management and scale vehicle upkeep, whether the aim is to replace a worn component or keep a matching spare ready for later use.

Models & trailers

1:14 Trailer Chassis 20/40ft.Cont., trailer

€399.99

Built around a CNC-milled aluminium frame with a black anodised finish, this 1:14 Trailer Chassis 20/40ft.Cont. brings container transport into a detailed scale format with a long 915 mm silhouette and a purposeful commercial-vehicle look. The 190 mm width and 140 mm height give the chassis a low, stretched profile that sits naturally behind a matching tractor unit in workshop, display or driving scenes. The 3-axle layout is paired with swing axle suspension and flat springs, so the undercarriage carries visible mechanical depth as well as articulated movement. Wide-base tyres with foam inserts add body to the running gear, while chrome-plated rims sharpen the road-going finish. Mechanical seat posts extend the functional trailer character beyond surface styling, and the changeable container fastening allows the chassis to be set up for 20 ft or 40 ft container formats. Age marking: 14 years. Behind a tractor unit, the long frame and multi-axle arrangement create the look of a working freight combination with clear transport focus rather than a generic road trailer. The chassis suits model-building enthusiasts who enjoy realistic commercial vehicle themes, detailed underframe construction and scale scenes centred on loading, hauling and depot movement.

Basic accessories

1:14 Trailersus. 8mm Lift, trailer axle parts

€29.99

A 1:14 trailer model gains a more technical underbody look with this Trailersus. set and its 8 mm lift layout. Created for retrofitting existing trailer axles with dummy air springs, the set brings the suspension area closer to the visual character often sought in detailed truck and trailer builds. The package contains the necessary moulded parts and 2 air bellows for the conversion. It is intended for use with dummy air springs 500907069, while the metal parts and the assembly material are reused from the existing axle. That setup keeps the focus on the suspension components that change the appearance of the axle assembly, rather than replacing the complete axle hardware. The black moulded parts suit workshop-style builds, restoration projects, and scale trailer customisation where the axle zone is meant to look more complete. One set is required for each trailer axle, which helps when planning a single retrofit or equipping several axles on a longer trailer. The 14 Years marking is stated in the product data. In a display build or a running truck-and-trailer combination, the conversion adds a more model-focused finish to the area beneath the trailer body.

RC truck accessories

1:14 UNI-TLS IR, transmitter unit, low loader

€84.99

Heavy-haul trailer functions become far more precise with the 1:14 UNI-TLS IR transmitter unit, built to connect an existing lighting system to the CARSON TLS low-loader control setup. The module sends both lighting and auxiliary commands to the trailer via infrared, creating a clean control link for complex low-loader operation. Designed for third-party use, the unit expands a 1:14 electronics layout with a focused set of control options for articulated transport models. The infrared transmitting diode forms the signal bridge to the trailer control unit 500907712, which is required separately for trailer control. Alongside standard light commands, the system supports additional switching tasks for functions such as a gooseneck section, electric supports, ramp drive or steerable trailer axles. Operating voltage is 5-7.4 V DC, and power is supplied directly via the receiver. Scope of delivery includes the UNI transmitter module, IR transmitting diode, 10-pin cable set and instructions. In a workshop-style build or an active driving layout, the module suits model hauliers who want trailer lighting and moving low-loader functions to respond through one coordinated infrared link. It fits especially well into detailed truck and trailer combinations where realistic control of transport equipment matters as much as the tractor unit itself.

RC truck accessories

1:14 Warning Signs LED TLS, trailer accessory

€54.99

Heavy haulage details make the difference on a scale build, and these 1:14 warning signs bring that look into the trailer setup with illuminated red and white SMD LEDs. The set contains 4 warning signs ready to connect, adding a functional lighting element that suits low-loader scenes and transport-focused model layouts. The pre-wired power circuit board keeps the electrical side straightforward and is designed for direct connection to the TLS low-loader control unit 500907712. Installation uses the existing mounting points on the CARSON gooseneck low-bed trailer 500907700, which keeps the fit aligned with the intended trailer platform. Each sign measures 21 x 21 mm with a width of 71 mm, giving the assembly a compact scale presence. The extendable construction can be moved in or out by loosening the screws, so the sign position can be adapted to the width of the load. Mounted on a low-bed trailer, the illuminated signs add a convincing finishing touch to heavy transport combinations in workshop builds, display setups, and driving sessions. The 5 V/DC operating voltage matches the stated electrical specification for integration into the TLS system.

Tyres & rims

1:14 Wheel Wide Trailer Wheels, Chrome Rims

€26.49

Chrome truck rims are a classic detail on full-size road trailers, and this 1:14 wheel set brings that look into a scale build with a wide format made for trailer use. The set includes 2 wide trailer wheels with a chrome finish, giving compatible models a brighter, more defined wheel appearance on the axle. The wheel design is intended for CARSON-MODEL SPORT trailers and suits rebuilds, replacements or visual upgrades where the running gear needs a fresh matching look. Each rim is specified for use with 5 x 11 x 4 mm ball bearings, which gives the assembly a clear bearing standard for fitting and maintenance. The wide profile supports the visual character expected from scale transport trailers, while the chrome surface, vent openings and shaped hub area add mechanical detail that stands out on the undercarriage. As an accessory part rather than a complete vehicle, the set focuses on wheel appearance and fit within an existing trailer setup. Mounted on a scale trailer, the 2 matching rims suit workshop-style rebuilds, custom transport combinations and replacement jobs after regular running. In display scenes or on the road behind a truck tractor, the chrome finish gives the trailer axle area a more authentic heavy-duty look.

RC tractors

1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor

€84.99

The DEUTZ-FAHR 8280 TTV is recreated here as a 1:16 RC tractor with a detailed body, realistic driving functions and a strong farm vehicle presence. At 400 mm long, 180 mm wide and 234 mm high, the model carries the proportions of the original into a format that suits both active driving and shelf display. The ready-to-run set includes the tractor, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 transmitter batteries. Engine sound and horn add direct control inputs beyond steering and throttle, giving each run a more lifelike operating feel. The licensed DEUTZ-FAHR design is supported by cab details, body shaping and the characteristic tractor layout. With 5 frequency channels, the radio system provides stable control for solo driving sessions. Driving time reaches up to 90 minutes, allowing longer runs before recharging. On the floor at home, along a garden path or across lightly uneven ground, the compact dimensions and rigid axle help the tractor stay composed as it changes direction and tracks through tighter sections. Age 8 years+ marks the recommended age for use.

RC tractors

1:16 Deutz-Traktor 8280TTV, RC tractor

€109.99

The Deutz-Traktor 8280TTV in 1:16 scale brings agricultural RC driving into a compact format with a matching trailer and a fully equipped ready-to-run setup. The model uses a 2.4 GHz remote control system and arrives with the drive battery, USB charger and 2 x LR03 AAA transmitter batteries, so all core components for operation are already in the box. Its 7.4 V system pairs with a 500 mAh Li-Ion battery to deliver up to 90 minutes of operating time, giving the tractor enough endurance for repeated hauling runs, careful reversing and steady trailer work. The trailer adds a second handling element to each session, since turns, alignment and positioning need more control than a single vehicle on its own. With 5 frequency channels available, the radio setup supports controlled input during forward runs, direction changes and tighter manoeuvres. The ready-to-run format keeps the focus on driving rather than sourcing the basic operating equipment separately. On the floor, the tractor and trailer combination suits routes with bends, loading-play setups and repeated parking tasks where the longer overall shape changes how each turn is approached. The 8+ age marking fits a model that combines vehicle control, trailer guidance and battery-powered runtime in one clearly structured RC format.

RC diggers

1:16 Volvo L260H, wheel loader, 100% RTR

€369.99

The Volvo L260H is one of the best-known wheel loaders on large construction sites, and this 1:16 RC version brings that machine character into a fully functional ready-to-run format. At 530 mm long, 204 mm wide and 212 mm high, the model carries the broad stance and working proportions of the original into a format that gives the bucket action real presence. The 4110 g wheel loader combines scale detail with a drivetrain built for active operation. A battery holder sits under the engine hood, keeping the 7.4 V 1500 mAh Li-Ion drive battery neatly integrated into the body. The detailed driver's cabin includes an opening door, adding another layer of realism to the exterior. Sound and light functions extend the machine feel during operation, while the true-to-original wheel loader tyres match the construction styling with a tread pattern suited to the model's working look. The radio system uses 2.4 GHz technology and 10 channels for precise command input across the loader's driving and function controls. Running time reaches 60 minutes, giving the model enough time for longer loading sequences, repeated manoeuvres and display-worthy driving sessions. On a floor, paving or a compacted play surface, the combination of scale dimensions, functional bucket action and machine-style steering creates a focused RC construction experience.  Warning! Not suitable for children under 14 years.

RC cars

1:24 Aston Martin Vantage, RC car, 2.4 GHz RTR

€24.99

British sports car character meets compact radio control in this 1:24 Aston Martin Vantage. The licensed body combines a low coupe profile with front and rear LED lighting, creating a distinctive presence on indoor courses and evening driving sessions. At 195 mm long, 80 mm wide and 49 mm high, the model keeps a small footprint that suits quick direction changes and easy placement on home tracks. The 172 g weight supports agile handling, while the rear differential helps the driven axle work smoothly through bends instead of pushing wide. Fine steering adjustment gives the control system a more exact response, so short corrections and tighter corner entries feel deliberate rather than abrupt. The 2.4 GHz remote control system allows interference-free operation, which is especially useful when several RC models are running in the same area. A 3.7 V 500 mAh Li-Ion drive battery powers the car, and the set includes a USB charger for straightforward charging between runs. As a 100% RTR set, the RC car comes with the model, remote control, drive battery, charger and 2 x LR03 AAA transmitter batteries, so driving can start without extra setup beyond charging. The fast, manoeuvrable layout and realistic sports car look make it equally suited to short sprints across smooth floors, improvised living-room circuits and relaxed display breaks between runs.

Mini RC cars

1:32 Volkswagen Beetle, RC car, 2.4 GHz RTR

€19.99

The Volkswagen Beetle remains one of the most recognisable car shapes ever built, and this 1:32 RC version translates that silhouette into a compact off-road runner with a bold lifted stance. At 135 mm long, 85 mm wide and 85 mm high, the ready-to-run model combines classic Beetle lines, oversized treaded tires and red LED underbody lighting for eye-catching driving sessions at home. The interference-free 2.4 GHz radio system supports precise control, while the 3.7 V 500 mAh Li-Ion drive battery delivers up to 60 minutes of runtime per charge. A weight of 273 g keeps the model easy to handle and quick to redirect through narrow spaces. The included Volkswagen license ties the body design to the named vehicle, and the compact proportions suit tabletops, smooth floors and improvised obstacle routes. The handheld controller and USB charger are included in the set, keeping the focus on driving rather than extra setup. Short bursts across the living room, figure-eight turns around chair legs or evening laps with the red underglow all suit this small-scale RC car. The fully assembled format also makes it easy to move from charging to driving whenever a quick session fits the day.

Mini RC cars

1:50 Nano City Crane Truck, RC truck, 2.4 GHz

€18.99

Construction crane trucks bring compact utility engineering into motion, and this 1:50 Nano City Crane Truck translates that character into a radio-controlled format with a realistic crane truck appearance, a detailed driver's cab and LED lighting. At 135 mm long, 60 mm wide and 90 mm high, the model fits neatly into indoor driving spaces while still carrying the proportions and working look of a mobile crane vehicle. The interference-free 2.4 GHz remote control system supports precise handling across the truck's compact 146 g format, making short direction changes and careful positioning easy to manage. A 3.7 V Li-Ion drive battery with 500 mAh capacity powers travel times of up to 40 minutes, and the included USB charger keeps the rechargeable setup straightforward. The crane tower can be rotated manually through 360°, while the outriggers can be adjusted manually in both height and length to change the truck's stance for different scenes. That combination suits floor-based routes, desk-edge manoeuvres and small construction layouts where the truck can drive into place, extend its supports and turn the crane into position. With the ready-to-run model, remote control, battery, charger and instructions included, the set focuses on compact RC driving with a functional crane feature and a strong city-service look.

Mini RC cars

1:50 Nano City Fire Truck, RC car, 2.4 GHz

€18.99

Fire engines with access platforms bring a distinct presence to any city scene, and this 1:50 Nano City Fire Truck translates that character into a compact RC format. The 135 mm vehicle combines radio-controlled driving with a manually operated crane tower, creating movement on the ground and a second action point above the chassis. The ready-to-run model comes with a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery and a USB charger, so the core driving setup is already matched to the vehicle. At 60 mm wide, 92 mm high and 146 g in weight, the fire truck stays compact enough for desks, floors and small obstacle layouts while still carrying a clearly defined body shape. LED lighting sharpens the emergency-vehicle look in motion, and the detailed driver's cab adds another layer of scale character. The crane tower can be rotated manually through 360°, while the outriggers can be adjusted by hand in both height and length to change the support position for each setup. That mix of RC driving and manual functions suits short rescue-style routes, tabletop layouts and compact city scenes where turning, positioning and staging all matter. With a runtime of up to 40 minutes, the model has the endurance for repeated driving rounds before returning to the USB charger.

Mini RC cars

1:50 Nano City Garbage Truck, RC car, 2.4 GHz

€18.99

Utility trucks are a familiar part of the city scene, and this 1:50 Nano City Garbage Truck brings that working-vehicle character into a compact radio-controlled format. At 135 mm long, 60 mm wide and 76 mm high, the model combines a small footprint with a clearly defined body shape and a detailed driver's cab. The ready-to-run set includes the model, a 2.4 GHz remote control, a Li-Ion drive battery rated at 3.7 V and 500 mAh, a USB charger and instructions. With a weight of 146 g, the truck stays light in hand and easy to place on the floor between runs. The 40 minute runtime supports longer driving sessions without frequent charging breaks, while the radio system keeps the control link focused on the vehicle during each manoeuvre. LED lighting adds another functional detail to the body, and the rubber tires support controlled movement with their non-slip contact patch. The compact scale suits indoor routes across hallways, living spaces or a cleared play area, where the truck can weave around furniture legs, follow improvised collection rounds or line up with other city-themed vehicles. Between runs, the true-to-original design and utility-truck proportions also give the model a neat display presence on a shelf or desk.

Mini RC cars

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

€17.99

The Lexus LX570 appears here as a compact 1:60 Nano Racer with radio-controlled handling and a body shape that carries the full-size SUV's presence into a format just 79 mm long. At 33 mm wide, 22 mm high and 25 g in weight, the model stays light and easy to place on tables, smooth floors or short indoor courses. The 2.4 GHz control system supports stable command input across a range of 15 m, while the handset combines driving control with a built-in charging connection. A 1.2 V 80 mAh NiMH drive battery is included, and the ready-to-run format means the main components are already in place for immediate use. The official Lexus licence anchors the styling in the real vehicle, giving the front end and overall proportions a recognisable road-going identity. Included contents are the ready-to-run model, remote control with charging connection, NiMH drive battery, screwdriver and instructions. With up to 10 minutes of driving time, the Nano Racer suits quick laps across a desk, short obstacle layouts or side-by-side sessions with other mini RC vehicles. The ability to operate up to 50 vehicles simultaneously also opens the door to compact group racing without the control system getting in each other's way.

Mini RC cars

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

€17.99

The Lexus LX570 appears here as a compact 1:60 Nano Racer with a licensed body shape, combining SUV styling with radio-controlled driving in a format that measures just 79 mm long, 33 mm wide and 22 mm high. At 25 g, the small chassis stays light in hand and easy to place on short indoor routes, from table-edge slaloms to quick floor runs around everyday obstacles. The set comes as a ready-to-run model with a 2.4 GHz remote control unit, a 1.2 V/80 mAh NiMH drive battery, a screwdriver and instructions. The controller includes a charging connection, so the vehicle can be charged directly through the handset rather than through a separate dock. That compact charging setup keeps the driving system together in one place and suits spontaneous sessions when only a small space is available. The 15 m range gives enough distance for controlled manoeuvres across rooms, while the radio system allows up to 50 vehicles to run simultaneously for club-style races or family competitions. Its small scale makes the Nano Racer easy to store between runs and simple to bring out for short RC sessions without a large driving area. On smooth indoor surfaces, the Lexus LX570 shape and mini dimensions create a neat balance of display appeal and active use, whether the focus is solo driving or lining up several cars for close-quarters racing.

RC chassis & attachments

1:8 Akuma, body set, green cyan

€33.99

The Akuma body parts set brings a fresh racing look to a 1:8 RC model with a green and cyan finish and a matching rear wing. Designed as a body set, it gives hobby builds a defined outer shape for repair work, replacement use or a visual change on an existing chassis. The set is presented as body parts for the Akuma and includes the main shell, the separate wing and visible mounting hardware for installation. Tinted window graphics, black and silver areas and 4X4 markings shape the competition-inspired appearance shown in the imagery. Because this is a body parts set rather than a complete vehicle, the focus stays on the exterior components that change the model's look after wear, damage or a new build direction. The separate wing adds the finishing detail that completes the body line at the rear. On the hobby bench, this set fits naturally into rebuild sessions, shell swaps and trackside refresh work for a 1:8 platform. The included hardware supports mounting tasks, while the Akuma styling gives the finished model a bold off-road racing character once the shell and wing are in place.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Akuma, body set, pink grey shell

€33.99

The Akuma name suits the sharp, competition-style shape of this 1:8 body set. Pink and grey graphics spread across the moulded shell and separate rear wing, giving the buggy a striking race-ready look while keeping the outer panels visually matched. The shell shows pronounced aerodynamic contours, vent-style moulded detailing and prepared mounting points that guide installation on the vehicle. Alongside the main body and wing, the set includes fastening parts shown for the assembly: body clips, screws, nuts and spacers. That combination makes this set a practical choice when an existing shell needs replacement or when a fresh exterior is planned for an Akuma build. The separate wing adds another defined element to the silhouette and carries the same visual language as the shell itself. In workshop use, the set supports a straightforward body refresh with coordinated parts instead of piecing together individual exterior components. Once mounted, the bold contrast of bright pink, grey, black and white stands out clearly during running sessions and gives the model a focused off-road racing character.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Climb/Dessert Warrior 3.0, wheel set

€40.99

The 1:8 Climb/Dessert Warrior 3.0 wheel set brings a fresh running setup to off-road RC sessions with 4 mounted wheels that combine black rims and knobby rubber tyres in one ready-to-fit package. The tread pattern is shaped for rough terrain, giving the model a more planted feel on dirt sections, gravel paths and broken ground where clean traction matters. Each wheel uses a black multi-spoke rim with a deep inner dish and reinforcing spoke structure visible from the rear. On the outer face, the beadlock-style look with small moulded bolt details gives the set a purposeful desert and off-road character that suits the Climb/Dessert Warrior 3.0 designation. The central hex-style hub opening supports a direct mechanical connection at the axle, so the wheel set is built around practical replacement use rather than display-only styling. As a 4-piece set, the wheels suit a full vehicle refresh after heavy running or a matched swap before the next session on loose surfaces. The mounted design keeps the focus on getting a 1:8 model back onto the track with a consistent look and tread pattern across all 4 corners.

RC buggys

1:8 Monsuta, RC car, 100% RTR orange

€169.99

The 1:8 Monsuta 100% RTR orange brings large-scale off-road action straight to the ground with a 530 mm long chassis, fully suspended layout and 2.4 GHz radio system. Its 355 mm width and 200 mm height give the truck a broad, planted stance that suits rough tracks, loose dirt and uneven terrain. The ready-to-run set includes the remote control, a 7.4 V 3000 mAh Li-Ion drive battery, a USB charger, 4 x LR06 transmitter batteries and instructions, so the full driving package is in the box from the start. Water-resistant RC components support running on demanding surfaces where dust, splashes and changing conditions are part of the session. The quick-change battery mount shortens stops between runs and makes battery swaps more direct at the bench or trackside. At 2384 g, the chassis carries enough mass for a substantial road feel while the suspension works to keep the truck settled as the terrain changes. Whether the route runs across packed earth, gravel or a backyard jump line, the Monsuta is built around clear control response and off-road grip. A compatible spare battery is available separately for longer driving sessions with less downtime between packs.

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

€174.99

The 1:8 Rock Wilder brings large-scale off-road presence to every run with a 530 mm long chassis, full suspension and digital proportional control. In black and red trim, the ready-to-run setup pairs a type 550 brushed motor with water-resistant RC components for driving on mixed terrain where dust, loose gravel and uneven ground are part of the appeal. Its 355 mm width and 220 mm height give the model a broad, stable stance, while the 2552 g weight adds substance as the suspension works through ruts and bumps. Reinforced suspension arms support the independent layout at each corner, and the quick-change battery mount keeps battery swaps straightforward between sessions. The included 7.4 V 3000 mAh Li-Ion drive battery, USB charger, 2.4 GHz remote control and 4× LR06 transmitter batteries cover the core running equipment in one box. Age recommendation: 14 years+ The Rock Wilder suits trackside bashing, open gravel areas and compact dirt routes where the proportional steering and throttle inputs can be used with precision. Water-resistant electronics help the model stay focused on the route when conditions turn messy, and the RTR format keeps the emphasis on charging up and heading out for the next run.  Warning! Not suitable for children under 14 years.

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

€174.99

The 1:8 Rock Wilder RTR brings large-scale off-road driving into a 530 mm chassis with a 355 mm width and 220 mm height, giving the model a broad stance for rough terrain. Its yellow and red bodywork pairs with a type 550 brushed motor and a red anodized aluminum motor heat sink, combining strong drive output with a component setup shaped for sustained running. A quick-change battery mount shortens stops between packs, and the included 7.4 V 3000 mAh Li-Ion drive battery supplies up to 12 minutes of running time. At 2552 g, the model carries enough mass to feel planted as the suspension works across ruts, gravel and uneven ground. The solid impact-resistant front bumper takes the first contact in close running, while the 2.4 GHz radio system supports stable control without the channel conflicts common to older crystal-based sets. Age recommendation: 14 years and over. Loose dirt tracks, compacted paths and rough open ground all suit the Rock Wilder setup, especially where the long wheelbase and off-road tire format can work through changing grip levels. The ready-to-run package includes the remote control, drive battery, USB charger, 4× LR06 transmitter batteries and instructions, so the focus stays on charging the pack and heading out for the next run.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Virus Extreme, wheel set, 2 mounted wheels

€33.99

The Virus Extreme name points straight to rough-surface running, and this 1:8 wheel set supports that role with 2 mounted wheels built as complete assemblies. The black finish, multi-spoke rim design and pronounced off-road tread give the pair a focused look that suits a hard-driven RC setup on dirt and gravel. Because the rims and tyres are already combined, the set works as a straightforward replacement when existing running gear is worn or damaged. The deep block pattern is shaped for loose terrain, where the tread can key into the surface during acceleration and direction changes. The ready-built format also helps when keeping matching spares in the workshop, since both wheels share the same visual style and tread pattern. As a model supply for the Virus Extreme, the set concentrates on one practical job: restoring a consistent wheel and tyre setup with parts made for this series. On a buggy prepared for outdoor sessions, a fresh pair can be fitted before the next run on compacted earth, gravel paths or rough track sections. The set also suits routine maintenance between driving days, when a matching 2-wheel replacement keeps the model prepared for the next outing.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Wheel-Set KOD, wheel set, 17 mm hex

€40.99

Chunky tread blocks and a 1:8 format give this KOD wheel set a focused off-road setup for compatible RC vehicles. Designed for models with a 17 mm hex wheel hub, the 4-wheel set brings a direct way to refresh the running gear with a tread pattern built for loose and uneven ground. The mounted wheels combine black rims with rubber tyres shaped around an extreme stud profile. That profile gives the contact patch a more aggressive bite on dirt and rough tracks, while the rubber compound is specified for a very long service life. As a replacement set, the 4 matching wheels keep the vehicle on a consistent tread pattern at every corner, which matters when the chassis is working across mixed off-road surfaces. The 1:8 scale fit also makes the set relevant for a broad range of larger RC off-road platforms that use the stated hub format. In use, the wheel set suits track days on dusty ground, rough bashing areas and uneven outdoor terrain where a deeper tread pattern can make a clear difference. For model-building enthusiasts, it is a straightforward upgrade or spare set that keeps a compatible vehicle ready for the next run.

RC models in 1:87 scale

1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR

€104.99

Few cars carry the visual identity of the Volkswagen Beetle as clearly as this 1:87 RC version in red. The rounded body shape, detailed paintwork and decoration, and illuminated front and rear LED lights bring the classic silhouette into motion on a compact scale. The ready-to-run set includes the assembled model, a 2.4 GHz remote control system, a 3.7 V 40 mAh Li-Ion drive battery and 4 AAA transmitter batteries. Fully proportional control allows measured throttle and steering inputs instead of simple on-off commands, which gives the small chassis a more precise feel in confined spaces. Steering trim on the transmitter supports straight tracking when fine corrections are needed. The transmitter also handles charging, with a 45-minute quick-charge time matched by a driving time of up to 45 minutes. A storage showcase is included for keeping the model protected between runs. With its very small turning radius, the miniature Beetle suits short indoor routes, desk-side driving and detailed diorama settings where tighter corners matter. The 1:87 scale also makes it a strong fit for collectors and model-layout enthusiasts who want a drivable classic car with compact dimensions and a finished RTR setup.

RC models in 1:87 scale

1:87 VW Beetle Wintersport, RC car, 2.4 GHz

€109.99

The VW Beetle became one of the most recognisable car shapes of the post-war era, and this 1:87 RC version brings that silhouette into a compact format with working control and winter travel character. The VW Beetle Wintersport pairs micro scale handling with a light blue body, roof rack cargo and ski-themed detailing that stands out on a layout, shelf or small driving course. Its fully proportional control gives measured steering and throttle response instead of simple on-off inputs, which suits careful manoeuvres through model scenery and narrow tabletop routes. The compact chassis works with a very small turning radius, so bends, bridge sections and tighter lane changes feel more natural in limited space. Front and rear LED lights add a clear visual cue during running, especially in dimmer room light or evening diorama scenes. Power comes from a 3.7 V 40 mAh Li-Ion drive battery, and the set includes a 2.4 GHz remote control system plus 4x AAA transmitter batteries for operation. Charging takes place through the transmitter in 45 minutes, making short pauses between runs easy to manage. The ready assembled format puts the focus on driving, collecting and integrating the Beetle into model railway settings, classic car displays or compact indoor RC sessions. Age 14+

RC models in 1:87 scale

1:87 VW Beetle, RC car, 2.4 GHz RTR

€104.99

The Volkswagen Beetle remains one of the most recognisable car shapes of the 20th century, and this 1:87 RC version translates that silhouette into a compact model built for active driving. At 50 mm long, 20 mm wide and 18 mm high, the Bahama blue Beetle combines miniature scale with fully controllable handling and a detailed body that carries the character of the original into H0 format. Its 2WD RWD layout works with a brushed motor to deliver balanced running behaviour, while the 10 g weight keeps the model light on the surface. The officially licensed Volkswagen design is matched with front and rear LEDs that define the car clearly as it moves through table layouts, floor circuits or display-style street scenes. The 100% RTR set includes a permanently installed 3.7 V 40 mAh Li-Ion battery, 4x AAA transmitter batteries and a storage case, so the driving setup is complete straight away. The 2-channel radio system supports controlled runs with a range of up to 50 m, making the Beetle suitable for compact slalom routes, desk-side driving and small indoor courses where accurate line changes matter. Age marking: 14 years. Charging takes place through the transmitter and keeps the model ready for regular sessions between laps.

RC models in 1:87 scale

1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR

€114.99

The Volkswagen Beetle became one of the most recognisable car shapes of the 20th century, and this 1:87 RC version pairs that silhouette with a matching trailer for a compact driving set with strong period character. Detailed paintwork and decoration, front and rear LED lights, and the rounded body lines give the miniature a clear display presence even when parked between runs. Its 2.4 GHz radio system uses fully proportional control, so steering and throttle inputs can be adjusted smoothly instead of switching only between stop and full power. Steering trim helps fine-tune straight running, and the very small turning radius suits narrow routes on desks, shelves or indoor floors where larger RC models need more space. The included 3.7 V 40 mAh Li-Ion drive battery keeps the format compact, and the transmitter handles charging in 45 minutes. A storage showcase is included for presentation between driving sessions, and the set is marked 14+. The trailer adds a second moving element to the setup, changing the handling feel as the Beetle pulls a compact load through bends and turnarounds. Short evening runs, shelf display, or a small tabletop course all suit the 1:87 format, with the illuminated front and rear sections staying easy to spot as the model moves through tighter spaces.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Samba, RC car, surfboard RTR

€104.99

The Volkswagen T1 became one of the most recognisable vans of the post-war era, and this 1:87 VW T1 Samba brings that silhouette into a compact RC format with a surfboard detail and licensed Volkswagen styling. At 50 mm long, 21 mm wide and 19 mm high, the miniature format suits controlled runs on a desk, table or small indoor course where tight manoeuvres matter. The body combines detailed shaping with light blue and white paintwork, giving the Samba look a crisp period character in H0 scale. A weight of 15 g keeps the model light in hand and easy to place on narrow driving lines. The permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time, and charging takes place via the transmitter. The 100% RTR set also includes 4x AAA transmitter batteries and a storage case, so the model is ready for compact RC sessions straight away. Whether used for careful slalom runs between small obstacles or short laps across a tabletop layout, the miniature size and radio control create a focused driving setup in limited space. Age recommendation: 14 years and over.

RC receivers and accessories

2.4GHz KR-242XT Receiver, 4-channel radio unit

€74.99

The KR-242XT is a compact 2.4GHz 4-channel receiver made for hobby-grade RC installations where clean electronics packaging and dependable channel allocation matter. Its short-format design suits model layouts with limited installation space, while the 4-channel configuration leaves room for more than the core driving functions in compatible radio-controlled builds. Within an RC setup, the receiver acts as the link between transmitter commands and the vehicle's onboard electronics, making channel management a central part of the build. The KR-242XT is positioned for enthusiasts who work with detailed model configurations and need a receiver that fits neatly into tighter chassis sections. The 2.4GHz specification places it in the current standard for modern radio control systems, and the compact housing supports tidy cable runs around surrounding components. With an age marking of 14 Years, it sits clearly in the hobby segment rather than entry-level toy use. This format suits workshop upgrades, replacement installations, and fresh RC builds where the electronics package needs to stay compact. In a carefully planned chassis layout, a short receiver can make the difference between a crowded interior and a cleaner, more accessible arrangement.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 13T-BB, electric motor, 6 V RC drive

€18.99

The 540 Pro 13T-BB electric motor is a brushed RC drive unit built for model vehicle projects that need a clearly defined performance setup. With 13 turns, a nominal voltage of 6 V and an operating range from 4.8 to 8.4 V, it fits tuning, replacement and workshop builds where the electrical data matters as much as the fit. The attached cable adds a practical connection detail straight from the pack. Its technical profile centres on 32,000 rpm, 35 N mm torque, 99 W output and 5.3 amps current consumption. That combination suits hobbyists comparing drive characteristics across compatible RC electronics rather than choosing by size alone. The 540 can format is a familiar reference point in many model vehicle platforms, and the BB designation marks this version as a ball bearing motor. For workshop planning, the stated voltage window helps match the motor to an existing setup without guesswork. In use, this motor suits replacement jobs on worn brushed drives, fresh tuning builds and spare-parts boxes for regular track or car park sessions. The compact 540 format and included cable keep the focus on fitting the motor into a compatible RC chassis and getting the drivetrain back into action.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 17T-BB, electric motor, 6 V brushed

€18.99

The 540 Pro 17T-BB electric motor brings classic brushed drive character to RC vehicle builds with a 540 size format, 17 turns and a measured output of 69 W. At 24,500 rpm, the motor delivers a lively power curve that suits hobby setups looking for a defined balance of speed and control rather than an undefined all-round unit. Its nominal voltage is 6 V, while the stated operating range of 4.8 to 8.4 V leaves room for different electronics configurations within the same build plan. Current consumption is listed at 3.5 amps, and the 32 N mm torque figure gives a concrete reference for how the motor translates electrical input into rotational force at the shaft. The BB designation points to ball bearing support, a detail valued in model-building circles for smooth running in a compact drive component. Included cable simplifies the connection step and keeps the motor ready for fitting into a compatible RC chassis. With an age marking of 14 years, this motor fits enthusiast-oriented RC projects where component choice shapes the final driving character. It works well in workshop-style upgrade sessions, replacement builds or fresh vehicle assemblies where a 540 brushed motor with 17 turns is the required drive unit.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 21T-BB, electric motor, 6 V 60 W

€18.99

The 540 Pro 21T-BB electric motor brings classic brushed drive technology to RC model builds in a compact 540 size format. With 21 turns, a 6 V nominal voltage and a stated output of 60 W, it gives hobby projects a clearly defined motor option for drivetrain installations where size, power and electrical data all need to line up. Its operating range spans 4.8 to 8.4 V, making the motor suitable for different compatible power configurations within that window. The stated speed of 19,000 rpm and current consumption of 2.7 amps provide concrete figures for planning the drive package around the motor's characteristics. A torque rating of 30 N mm adds another useful reference point when matching the motor to gearing, transmission parts and the intended running style of the model. The included cable supports straightforward integration into the vehicle's electrical layout. In workshop use, this motor suits enthusiasts comparing voltage, rpm, torque and turns before choosing a brushed setup for a compatible RC vehicle. It also works well as a replacement or upgrade path when an existing 540 format installation calls for a motor with clearly specified electrical and performance values.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

6K Reflex Stick Pro 4 WP Receiver, RC receiver

€42.99

The 6K Reflex Stick Pro 4 WP Receiver brings compact radio control hardware to RC vehicles and boats that need dependable 2.4 GHz signal handling in a small format. With 6 channels in a waterproof housing, this receiver supports steering, throttle and additional functions while fitting into installations where space is limited. Its housing measures 46 x 28 x 17 mm and the unit weighs 13 g, so the receiver can be positioned in many chassis layouts without taking up much room. As a replacement receiver, it is made to work with the FS 6K Reflex Stick Pro 4 and the FS 6K Reflex Stick Pro 4 LCD remote controls named in the product data. The 2.4 GHz frequency range supports stable command transmission for models that rely on precise radio response. The 6-channel layout also leaves room for more complex function control than a basic 2-channel setup. In a trail truck, work vehicle, boat or other RC build with several switchable functions, the receiver supports a tidy electronics layout and clear channel allocation. Age 14 Years+

NiMH batteries

7.2V 2500mAh NiMH Race Battery, RC battery

€22.99

Built for RC vehicles and broader model building use, this 7.2 V NiMH race battery combines a 2500 mAh capacity with a Tamiya connector system in a format that fits established hobby setups. The nickel-metal hydride pack is designed as a rechargeable power source for compatible models, making it a practical choice where repeated driving sessions and regular charging cycles are part of the routine. Its specification focuses on the demands of active RC use. A maximum charging current of 2.5 A allows the pack to be charged within the stated limit, while the high current discharge characteristic supports applications that draw stronger power under load. That combination suits a wide range of electric model uses, from vehicle platforms to other model building applications that rely on a 7.2 V battery with this connector format. The pack format with bundled cells, power leads and plug connection follows the familiar layout used across many hobby systems. In use, the battery slots naturally into workshop preparation, replacement planning and regular running sessions with compatible RC models. Age marking: 14 years. Whether kept as a spare pack for longer track time or used as the main power source in a compatible chassis, it brings clear, stated electrical data to the setup.

LiPo batteries

7.4V 4500mAh LiPo Classic-Size, RC battery

€36.99

Built for classic RC layouts, this 2S LiPo battery brings 7.4V output, 4500mAh capacity and a 60C discharge rate into a Classic-Size format that matches the footprint of conventional NiCd and NiMH packs. In a 1:10 chassis with a standard battery slot, the 134 x 45 x 24 mm housing drops into the familiar space while delivering the response and consistency expected from modern LiPo power. The pack uses a Deans plug connector for the main connection and an XHP balancer connection for cell balancing during charging. Its 223 g weight places a substantial energy reserve into a format that remains suitable for common vintage RC cars. The 2-cell configuration supplies 7.4 volts, making it a direct fit for setups designed around this voltage class. The 4500mAh rating extends running potential beyond smaller packs, while the 60C specification supports current demand when acceleration loads rise. Age marking: 14 years and over. This battery suits restoration projects, regular track sessions and classic touring car builds that use a standard battery compartment. It also works well where older chassis dimensions matter, but modern LiPo chemistry is preferred over legacy pack formats.  Warning! Not suitable for children under 14 years.

Model helicopters

AB.205 / UH-1D SAR Helicopter Model Kit 1:48

€27.49

The Italeri AB.205 / UH-1D "SAR" presents the Agusta-Bell AB-205 as a detailed 1:48 scale helicopter build, capturing the form of a multirole aircraft developed in Italy under license from the Bell UH-1 Iroquois, widely known as the "Huey." The search-and-rescue version gives the finished model a clear operational identity, with the familiar utility-helicopter layout translated into a compact display scale. The full-size AB-205 entered service in the 1960s and was developed for rapid transport into areas that were difficult to reach, a role that shaped its broad, functional airframe. The aircraft combined structural simplicity with a configuration that could be adapted for military and civilian duties, including cargo transport, medical evacuation, civil protection and search-and-rescue missions. The original helicopter had a flight range of over 500 km and a maximum speed exceeding 200 km/h, details that underline the capable design behind this replica. That background gives the model extra depth on the workbench and in a finished collection, especially alongside other rotary-wing aircraft from the same era. The AB-205 also served in the aviation units of the Arma dei Carabinieri, adding a further real-world service context to this SAR-focused subject.  Warning! Not suitable for children under 14 years.

Axles & drive shafts

Akuma Alu-hex Hub 17 mm RC Wheel Adapter

€12.79

The Akuma Alu-hex hub 17 mm is a compact RC spare part set for wheel mounting and running gear service on compatible Akuma model vehicles. With 2 machined aluminium hub pieces, 2 matching nuts, 2 metal pins and 2 black set screws, the set brings together the fastening hardware needed for a complete hub replacement at the wheel end. The 17 mm hex format defines the wheel interface, while the threaded hub design and separate locking hardware point to a mechanical assembly that is secured in several steps rather than a simple push fit. The metal pins and set screws support alignment and retention within the hub setup, helping restore the intended connection between axle area and wheel mount when original parts are worn, lost or damaged. The silver finish keeps the parts easy to identify during bench work, and the compact format suits parts storage in an RC workshop or field box. This kind of hardware fits naturally into rebuilds, maintenance sessions and spare-parts stock for regular RC driving. Whether a model is being refreshed after heavy use or prepared with replacement wheel-end hardware before the next run, this set supplies the core mounting parts in one pack.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Battery Holder Set, model accessory

€27.99

The Akuma Battery Holder Set adds a dedicated battery mounting solution to the model layout with a long tray, matching cover plate and support brackets. Black moulded parts and a screw-fastened structure create a clean, component-based setup that suits hobby work on 14 Years+ models and keeps the battery area clearly organised. Alongside the main tray, the set includes a rectangular frame bracket with upright arms, a clamp-style bracket with mounting tabs and a side loop, a small spacer block, 6 black screws and 2 wide hook-and-loop straps. This combination supports a more tailored installation around the chassis area, with the straps wrapping the battery pack while the rigid parts define its position. The separate brackets also help adapt the holder to the available mounting points rather than relying on a loose battery placement. In workshop sessions, the set supports battery installation, refit work and replacement of worn holder parts on the Akuma. It also suits rebuilds where a clear, screw-mounted battery position is needed for a neat internal layout and repeatable pack changes between driving sessions.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Bodyholder Kit, RC spare part set

€6.59

The Akuma bodyholder kit is a dedicated RC spare part set for front and rear body mounting points, built to return the correct connection between chassis and bodyshell on the matching Akuma model. With a minimum age marking of 14 Years, it sits in the hobby and model-building range rather than general toy use. The set includes a structural holder piece, a mounting plate, 2 matching inserts and 2 screws. The black moulded parts are formed for mechanical fastening, with the plate using multiple mounting holes and the main holder section shaped to seat the inserts and secure the assembly. This layout supports a direct replacement of worn, damaged or missing bodyholder components without introducing unrelated parts. As a model supply in the Carson Modelsport range, the kit is aimed at maintenance work that keeps an RC vehicle ready for continued running. In workshop use, the parts suit routine repairs after body mount wear, impact damage or lost hardware. The front and rear application makes the set useful when restoring the shell position and attachment points so the vehicle can return to its intended fit and appearance.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Motorholder, model accessory mount

€8.49

The Akuma Motorholder is a dedicated mounting part for the Akuma platform, built to secure the motor area with a precisely shaped metal bracket. Its rectangular form combines recessed fixing points with a large central opening and a U-shaped cutout, creating the clearances needed around the drive section while keeping the mount closely integrated with the surrounding assembly. The top face uses countersunk holes so the 5 included hex screws sit flush once fitted. Elongated slots add adjustment range during installation, which supports accurate motor positioning when replacing worn parts or rebuilding the drivetrain section. Three threaded side holes extend the mounting options for adjoining chassis elements, while the darker side walls and machined edges underline the technical character of this spare part. As a focused workshop component rather than a decorative add-on, the mount is shaped around fit, fastening and alignment inside the Akuma layout. This accessory suits bench repairs, routine maintenance and parts replacement on an Akuma model marked 14 Years and up. In a rebuild setup, the bracket forms a defined connection point for the motor section, helping keep the chassis assembly orderly and correctly aligned.  Warning! Not suitable for children under 14 years.

Pinions & gears

Akuma Pinion Gear 14T Model Accessory

€6.89

The Akuma Pinion Gear 14T is a drivetrain accessory for compatible Akuma model vehicles, built around a clear 14-tooth specification that helps identify the correct replacement or maintenance part within an RC setup. In workshop use, that concrete tooth count gives hobbyists a direct reference when checking an existing transmission configuration or preparing a repair. As part of the model supplies range, this gear suits routine servicing, parts organisation and planned spares stocking for RC vehicles in the Akuma line. The product data identifies it as a separate accessory rather than a complete vehicle, which makes it relevant for ongoing upkeep of a running model. The designation Motor Pinion 14T points to its role in the drive system, where a pinion gear forms part of the connection between motor output and the rest of the drivetrain. The listed references 500409082 and 500409083 link the gear to the Akuma context named in the data. On the hobby bench, a dedicated replacement gear helps keep maintenance focused and parts selection straightforward when an existing drivetrain needs attention. The 14 Years age marking is stated in the product data, placing this accessory in the model-building and RC hobby segment.  Warning! Not suitable for children under 14 years.

Additional spares

Akuma Steering Rack, model accessory, aluminum

€8.49

The Akuma steering rack brings a key front-end control component into the workshop as an aluminum replacement part for Carson Akuma models. Its role sits directly in the steering assembly, where the rack forms the connection point for the linkage and supports the intended movement of the front wheels through the chassis layout. The part is described as an Alu steering rack and is intended as a model accessory within the Models & Accessories range. As a dedicated spare part rather than a universal fitting, it matches the Akuma designation named in the data and gives repair and maintenance work a clearly defined replacement for the steering area. The aluminum construction adds a specific material choice to this component, making it a relevant search term for hobbyists who maintain, rebuild, or refresh running gear parts. With the steering plate named in the source data, the part also speaks to focused servicing of the control hardware rather than a general upgrade bundle. In practical use, this kind of replacement belongs on the bench during routine maintenance, after wear in the steering mechanism, or when a build needs the correct Akuma-specific part to return the front end to working order. The 14 Years age marking is stated in the product data.  Warning! Not suitable for children under 14 years.

Wishbones

Akuma Tie-Rods Kit, RC spare part, 4 pcs

€12.79

The Akuma tie-rods kit supplies 4 replacement parts for front and rear linkage work on compatible RC vehicle setups. As a dedicated spare part set, it gives model-building enthusiasts the core pieces needed when worn linkage components need to be exchanged and the chassis brought back into running condition. The set is identified in the data as a front and rear tie-rods kit and is intended for Akuma models. That makes it a focused choice for maintenance, repair, or parts stock in an RC workshop rather than a general accessory with unclear fit. The included 4-piece format suits jobs where several connection points need attention at once, reducing the need to source individual rods separately. The product image shows black moulded linkage components with mounting holes and small metal posts, indicating a mechanical connection role within the steering or suspension layout. Such parts are central wherever wheel guidance and chassis articulation depend on clean, correctly aligned link points. In practice, this kind of spare set fits naturally into routine rebuilds after heavy running sessions, collision damage, or scheduled chassis servicing. It also works well as a shelf-ready replacement set for hobby benches where compatible Akuma parts are kept available for fast turnaround between repair and the next drive.  Warning! Not suitable for children under 14 years.

Model car kit

Alfa Romeo 8C 2300 1931-33 Model Kit 1:12

€169.99

The Italeri Alfa Romeo 8C 2300 1931-33 model kit in 1:12 scale brings one of the defining sports cars of the 1930s into a 32.0 cm format with strong visual presence on the bench and on display. Its long bonnet, open 2-seat body and period racing proportions give the finished car the unmistakable character linked to the 8-cylinder supercharged original with 2,336 cc. This assembly kit is built from 320 parts, joined by 30 chromed parts and further refined with photoetched parts, screws, tubes and nylon net. The opening cowling allows the engine area to stay visible after assembly, so the highly detailed engine remains part of the finished presentation rather than disappearing under the bodywork. Steering wheels and realistic suspension add working-style detail to the structure and help the model reflect the mechanical layout of the full-size car. Rubber tires complete the wheel setup with a material and surface finish that suit a classic roadster of this era. The subject draws on the Alfa Romeo 8C line that became closely associated with international racing success and the name of Tazio Nuvolari, while this version focuses on the 2-seat Sport road car from 1931-33. With an assembly time of 600 minutes and an age marking of 14 Years, the kit suits a measured, detail-led build where body, engine and trim come together step by step into a substantial historic display model.

Model car kit

Alfa Romeo 8C 2300 Monza Nuvolari Model Kit

€169.99

The Italeri Alfa Romeo 8C 2300 Monza Nuvolari model kit captures one of the best-known racing cars of the 1930s in a large 1:12 scale with a finished length of 32.0 cm. Its long bonnet, open cockpit and exposed wheel layout give the completed car a strong period racing presence, whether it stands in a cabinet or takes shape step by step on the workbench. This assembly kit is built around 100% new moulds and combines 300 parts with 30 chromed parts, photoetched parts and rubber tires. The opening cowling adds a functional display feature while also framing the highly detailed engine once the build is complete. Steering wheels and realistic suspension add further mechanical character, and the extra detailing materials such as screws, tubes, rope and nylon net widen the finishing options across the body and chassis. The included colour instruction sheet supports the long 600 minute assembly process with a clear visual guide. The full-size Alfa Romeo 8C 2300 Monza took its name from the twin-seater Grand Prix car linked to Tazio Nuvolari and the Italian Grand Prix at Monza. That racing history gives the finished replica a clear motorsport identity, especially when the body markings and trim are applied. Age recommendation: 14 Years.

Model car kit

Alfa Romeo Giulietta Spider 1300 Model Kit 1:24

€37.99

The Italeri Alfa Romeo Giulietta Spider 1300 in 1:24 scale turns a celebrated Italian convertible into a detailed model kit with classic proportions and a compact finished length of 16.2 cm. The body shape, bright trim and open roadster layout give the build a distinctly early 1960s character, while the closed-roof option adds another authentic configuration drawn from the same car. This assembly kit is built around more than exterior form alone. The detailed engine gives the model a mechanical focal point, so the build is not limited to body panels and trim. Chrome parts define key accents across the car and sharpen the contrast between painted surfaces and metallic details. A colors instruction sheet supports accurate finishing choices during the 600-minute assembly process, which suits model builders aged 14 years and up. The subject itself reflects the 1962 evolution of the Giulietta Spider, when Alfa Romeo introduced bodywork updates, interior refinements and a larger 1,570 cm3 four-cylinder engine. On the bench, the 1:24 scale leaves room for careful paintwork, trim placement and engine detailing. Once completed, the 16.2 cm model sits comfortably on a shelf, in a display case or alongside other classic car builds, where the Spider profile, chrome highlights and optional closed capote give it a strong period presence.

RC shock absorbers & damper bridges

Alu damper 75 mm, RC damper set for 1:10

€15.49

Suspension tuning plays a central role in how a 1:10 RC chassis settles, rolls and tracks through corners, and this aluminium damper set brings that adjustment point into a compact 75 mm format. The set contains 2 dampers with coil-over springs and a metal construction that suits replacement work, rebuilds and workshop-led setup changes on compatible models. The dampers use threaded aluminium bodies, allowing the spring preload to be altered directly on the unit rather than through fixed-position parts alone. That layout helps when ride height and suspension response need to be matched more closely to the chassis setup already in use. The eyelet mounting points at the upper and lower ends follow a familiar RC suspension format, giving each damper a clear mechanical role between chassis and suspension arm. The included scale reference of 1:10 places the set within a widely used model category, where exact component length and mounting style are central to fitment. In practice, a pair like this suits maintenance benches, parts boxes and planned suspension updates on RC cars that use compatible 75 mm dampers. Whether replacing worn units or refining a running setup, the 2-piece configuration supports axle-based installation and keeps the focus on controlled suspension movement rather than improvised parts matching.

Military aeroplane models

AMX Ghibli Aircraft Model Kit 1:72 Scale

€29.99

The Italeri AMX Ghibli model kit brings a modern military aircraft into 1:72 scale with newly tooled parts, photo-etched details and markings for 4 versions. The finished build reflects the high swept wing layout of the original AMX "Ghibli", a single-engine ground attack aircraft developed through cooperation between the Italian and Brazilian aviation industries. This assembly kit is made for hands-on construction and finishing, with 600 minutes of assembly time supporting a more involved build. The aircraft represented here was developed in the 1980s to replace the Fiat G-91Y in Italian service, while Brazil also used the programme to replace the MB-326. The original aircraft used a Rolls-Royce Spey 807 engine and could reach 1,000 km/h. Italian service aircraft carried a 20 mm M61 cannon and an offensive payload of 3,800 kg, details that give the subject its distinct operational identity. On the workbench, the 1:72 format suits careful painting, decal placement and display planning without demanding excessive space. Once completed, the AMX Ghibli sits naturally in a modern military aviation collection, whether displayed as a single aircraft or alongside other late Cold War and post-Cold War jet subjects. Paints are required separately.  Warning! Not suitable for children under 14 years.

Model tanks

AS 42 Sahariana Model Kit 1:72 Desert Scout

€13.49

The Italeri AS 42 Sahariana model kit captures a distinctive World War II desert reconnaissance vehicle in 1:72 scale, combining compact dimensions with the purposeful layout developed for long-range operations in North Africa. Based on the chassis and mechanics of the AB 41, the original Camionetta Desertica modello 42 Sahariana was shaped for sand terrain, and that specialised role gives the finished replica its unmistakable profile. The open body, low side sections and external stowage create a build with plenty of visible structure once assembled. Fine parts for the chassis, wheels, interior elements and mounted equipment give the model a layered look that rewards careful painting and detail work. The subject is especially notable for its operational flexibility, as the real vehicle could appear with different armament configurations including a Breda 20/65 mod 1935 machine gun, a 47/32 anti-tank gun or a 20 mm Solothurn anti-tank rifle. Decals for 2 versions extend the historical finish options for the completed replica. On the bench, the 1:72 scale keeps the project manageable while still leaving room for crisp military detailing. Once finished, the AS 42 Sahariana sits naturally in a desert campaign display, a World War II vehicle lineup or a compact wargaming collection with period character and strong visual presence.  Warning! Not suitable for children under 14 years.

Model trucks

Black Thunder Truck Model Kit 1:24 Scale

€69.99

Black Thunder brings the customized Mack Superliner into 1:24 scale as a detailed plastic kit with a bold show-truck presence. The glossy black livery gives the finished truck a striking silhouette, while the Australian styling direction sets it apart from a standard road-going version. The full-size Black Thunder kept the original mechanical base and added tuning modifications that changed both its appearance and its engine and exhaust character. That background gives the model a clear identity during assembly, with each stage centered on a truck built around personalization rather than fleet uniformity. The Mack Superliner name also connects the subject to a vehicle that found commercial success beyond the United States, especially in Australia, where private owners and specialist body shops created highly individual machines. In model form, that context adds depth to the finished build and places the truck within a culture of custom transport design. On a shelf, in a workshop corner or as part of a transport collection, the Black Thunder theme stands out through its dark finish and event-focused character. The 14 Years+ marking and detailed kit format suit builders who want a truck subject shaped by custom aesthetics rather than standard factory trim.  Warning! Not suitable for children under 14 years.

Model motorcycles

BMW R75 Military Motorcycle with Sidecar 1:9

€65.99

The Italeri BMW R75 German Milit.Motor.w/Sidecar brings a distinctive wartime motorcycle to the workbench in 1:9 scale, with a finished model length of 26.7 cm that gives the sidecar layout, exposed engine and military fittings real visual presence. As a detailed assembly kit, it focuses on the characteristic engineering of the original BMW R75 rather than a simplified display piece. The full-size motorcycle entered production in 1941 after a joint BMW and Zundapp development brief aimed at using as many common components as possible for maintenance and spare-parts logistics. Its most unusual feature was the driven sidecar wheel, linked to the motorcycle through an axle system and supported by a locking differential with selectable gear ratios for on-road and off-road use. The original twin-cylinder 750 cc engine delivered 26 HP and a top speed of 95 km/h, giving the model a strong historical and mechanical background. The kit also offers decals for 4 versions, allowing the finished build to reflect different unit markings and service appearances. During assembly and finishing, the large 1:9 scale gives painted details, stencilling and weathering more room to stand out across the motorcycle, sidecar and mounted equipment. The completed model suits shelf display, diorama settings or a military vehicle collection where the combination of motorcycle, sidecar and period markings adds a different silhouette from standard armoured subjects.

Model car kit

Bugatti Coupe Napoleon 1:24 Detailed Plastic Kit

€36.99

The Bugatti Coupe Napoleon arrives as a 1:24 detailed plastic kit based on the Type 41 Royale, a car built by Bugatti between 1929 and 1933 in only 6 units. In scale form, the long silhouette, formal roofline and imposing proportions give the finished build the presence associated with one of the most exclusive cars in automotive history. The source subject stands apart through its extraordinary engineering and coachbuilt identity. The original Type 41 used a shared chassis and engine across the 6 cars, while each version differed in bodywork configuration, and the Coupe Napoleon was the first in chassis order. The historical reference also names an engine displacement of over 12,000 cm3, underlining the exceptional scale of the full-size car behind this kit. Its two-tone black and blue bodywork and velvet interior are central visual cues for the build, shaping a display model that reflects Ettore Bugatti's private car and a recognised icon of world automotive production. On the bench, the 1:24 format gives room to appreciate the car's distinctive length and stately proportions as the body takes shape. Once completed, the model fits naturally into a classic car collection, a period automotive display or a line-up focused on landmark European grand touring design.

Model car kit

Bugatti Type 35B 1:12 racing car model kit

€169.99

The Italeri Bugatti Type 35B 1:12 racing car model kit brings one of motorsport's defining machines into a large display scale with the long body, open cockpit and signature horseshoe-shaped radiator grille clearly expressed in the finished build. Based on the Bugatti Type 35B linked to Targa Florio and Monaco Grand Prix racing history, the model carries the character of a 1920s competition car with exposed details and a focused mechanical layout. The subject itself is rich in engineering detail. The original car used an 8-cylinder 2,263 cc engine, a 4-speed manual gearbox and a supercharger, and that technical identity shapes the model's appeal beyond its bodywork alone. New parts expand the build, while the opening cowling creates direct access to the engine area once assembled. Artificial leather, chromed parts, photoetched parts, screws, tubes and a die-cut masking sheet support a finish with varied textures and sharper detailing across key sections. The large 1:12 scale also gives the spoked wheel design, cockpit area and external race-car proportions more room to stand out. On the bench, the build suits careful painting, masking and detail work across the body, engine bay and cockpit. Once completed, the model carries the visual drama of a pre-war Grand Prix car, whether placed in a collection, photographed close up or displayed to highlight its racing silhouette and exposed mechanical character.  Warning! Not suitable for children under 14 years.

Model motorcycles

Cagiva Elephant 850 Winner 1987 Model Kit 1:9

€64.99

The Italeri Cagiva Elephant 850 Winner 1987 model kit brings a landmark Paris-Dakar rally motorcycle into a large 1:9 scale format, with a finished length of 23.8 cm that gives the fairing, seat profile and off-road layout clear visual impact on display. Based on the 1987 race machine, the build captures the distinctive desert configuration that set the original bike apart in endurance competition. The full-size motorcycle combined a steel tube and light alloy trellis frame with an air-cooled twin-cylinder engine rated at 80 HP at 8500 rpm, and the bodywork was shaped around a large protective fairing. Italeri supports that character with a detailed plastic kit that also includes rubber parts, screws, springs and rubber tubes, adding extra texture and mechanical definition during the build. The decal sheet carries race numbers, sponsor markings, instrument details and body striping used to recreate the period rally livery with precision. With an assembly time of about 600 minutes, this kit suits builders who enjoy a longer bench session centered on painting, fitting and finishing. The completed motorcycle stands out in a display case, on a workshop shelf or as part of a motorsport collection, where the Dakar-inspired silhouette, tall front section and competition graphics remain easy to read from across the room.

Model aircraft

CANT Z.1007 Alcione model kit 1:72 aircraft

€33.49

The CANT Z.1007 Alcione model kit in 1:72 scale recreates an Italian medium bomber that entered service in the late 1930s and saw extensive use with the Regia Aeronautica during the Second World War. Its defining 3-engine configuration gives the aircraft a distinctive silhouette on the workbench and in a finished display, while the historical subject adds clear context for builders drawn to military aviation. Designed by Filippo Zappata, the original CANT Z.1007 Alcione combined a wooden structure with 3 Piaggio P.XI radial engines, each rated at 1,000 hp. That power allowed the bomber to reach a maximum speed of 450 km/h. The aircraft also carried up to 1,200 kg of offensive payload in an internal bomb bay, a detail that underlines its role as a medium bomber rather than a transport or patrol aircraft alone. Crew capacity was typically 5 men, rising to 6 when a photographic operator joined reconnaissance and maritime patrol missions. The subject connects this 1:72 build to the Mediterranean, Balkan and North African theatres where the aircraft was mainly deployed. With an age marking of 14 years and up, the kit suits builders looking for a historically grounded aircraft project with a clearly documented wartime background and a recognisable tri-motor layout.  Warning! Not suitable for children under 14 years.

Military aeroplane models

CANT Z.501 Gabbiano model kit 1:72 seaplane

€30.99

The Italeri CANT Z.501 Gabbiano brings a distinctive Italian flying boat into 1:72 scale, capturing the long central hull, broad high wing and stabilising lateral floats that defined this maritime reconnaissance aircraft. As a detailed assembly kit, it turns the unusual seaplane layout into a focused build with a strong display presence once the airframe is complete. The original CANT Z.501 was developed in the 1930s by engineer Filippo Zappata for Cantieri Riuniti dell'Adriatico and served in patrol, search and rescue, and reconnaissance roles at sea. Its full-size configuration used a 900 HP Isotta Fraschini Asso XI engine and reached a maximum speed of 275 km/h, details that place the model within a clearly documented aviation context. The aircraft entered operational service during the Spanish Civil War and later saw extensive use by the Regia Aeronautica in the Mediterranean theatre during World War II. Defensive armament on the original aircraft consisted of three 7.7 mm Breda-SAFAT machine guns, and it could also carry a limited offensive payload. With about 600 minutes of assembly time, the build suits sessions that reward careful painting, decal placement and attention to the aircraft's float-equipped wing arrangement. The super decals sheet for 4 versions opens different finishing directions for a shelf display centred on interwar and World War II Italian naval aviation. Recommended from 14 years.  Warning! Not suitable for children under 14 years.

Catalogues & merchandise

CARSON Leaflet 2025

€0.69

Ball bearings

CC-02 Chassis Ball Bearing Set, model accessory

€27.99

The CC-02 chassis uses multiple rotating points across its transmission and axle layout, and this ball bearing set is built to replace those wear components with 22 precision-made metal bearings matched to that platform. The mixed sizes shown in the set support the different bearing seats used within the CC-02 chassis, giving model-building enthusiasts a focused upgrade for smoother mechanical operation. Instead of relying on plain bushings, the bearing design supports freer rotation at the points where shafts and driven parts turn inside the chassis. That can help the drivetrain run with less drag during regular use and gives maintenance work a more exact, component-based approach. The set combines 16 bearings of one size with 6 additional bearings in other sizes, reflecting the varied mounting positions found in the chassis layout. For rebuilds, servicing or a fresh parts refresh, that model-specific spread keeps the upgrade aligned with the actual hardware used in the vehicle. In workshop sessions, the set fits naturally into routine maintenance, from replacing worn running parts to preparing a chassis for cleaner, more efficient rotation. It also suits hobby benches where a CC-02 build is being refined with dedicated spare parts chosen for the platform rather than generic hardware.

Model tanks

Commando Car 1:35 Scale Model Kit with Figure

€12.49

The Italeri Commando Car presents a compact 1:35 scale military vehicle kit with a finished length of 9.5 cm and the open layout of a modified airborne jeep. Its proportions, exposed cabin and field equipment create a focused display piece that brings reconnaissance and commando vehicle history onto the workbench in a manageable format. The build is shaped around distinct subassemblies, including the interior tub, radiator and grille section, ladder-style chassis, suspension parts, wheels and exterior fittings. Instruction stages show steering and control details, seat assemblies, stowage pieces, a spare wheel and multiple weapon mounts, giving the model a layered mechanical look rather than a simplified silhouette. The subject is based on a wartime vehicle adapted for infantry support and rapid raids, with 5 machine guns and additional fuel capacity of 135 l in the original configuration. A crew figure is included to add scale contrast and strengthen diorama placement. On a shelf, in a military vehicle lineup or as part of a terrain scene, the Commando Car reads clearly through its low body, exposed seating and heavily equipped profile. Assembly is required, with a stated build time of 600 minutes. Paints, tools and cement are required separately.

Model figures

Confederate Cavalry Model Kit 1:72 Civil War

€10.99

Italeri Confederate Cavalry brings American Civil War mounted troops into 1:72 scale with an assembly kit built for historical displays, painted collections and battlefield dioramas. The set centres on cavalry figures and horses with varied poses, giving the finished scene the movement of a charge, a patrol or a formed mounted unit across terrain, roads or camp edges. The source material for the set points to Confederate cavalry regiments and their distinctive uniform details, including yellow trim, while also noting varied personal weapons and customised dress. That mix gives the finished group a less uniform field appearance than parade troops and suits scenes that aim to show the irregular character of wartime cavalry service. The sprues show riders with sabers and firearms, horse poses in motion, and a fallen horse part that can change the tone of a diorama from formal display to active combat. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a cabinet or across a wargaming table, the 1:72 scale makes the set easy to combine with other American Civil War miniatures, terrain pieces and period artillery. Careful painting can bring out saddle gear, hats, jackets and horse tack, while grouped placement can suggest a fast-moving attack line or a command element within a broader historical scene.

Model tanks

Crusader Mk.III Tank Kit with British Crew 1:35

€36.99

The Italeri Crusader Mk.III with British Crew brings a key British cruiser tank of the Second World War into 1:35 scale, pairing the later Mk.III configuration with a full crew scene for a display that goes beyond the vehicle alone. The build centers on the Crusader's desert-war profile, with its 6 pdr cannon and the distinctive running gear layout that made the type notable in rough terrain operations. This plastic kit is designed as a detailed assembly project and lists an assembly time of 600 minutes, giving the tank and figures room for a more involved finish. The Christie suspension with large diameter rolling wheels is part of the Crusader's defining engineering, and that layout gives the completed model a recognisable stance. Gluable rubber tracks shape the lower hull with flexible track runs, while the marking sheet supplies decals for 3 versions with serial numbers and tactical signs. The set also contains 9 figures, opening up options for command, maintenance and rest-scene arrangements around the tank. On a shelf, in a desert diorama or as part of a wider WWII armour collection, the combination of vehicle and crew creates a fuller historical scene than a tank alone. Paints and tools are required separately.

RC servos

CS-10 Digital Servo, RC servo, waterproof

€31.99

Compact RC control systems rely on a servo that turns radio signals into exact movement, and the CS-10 Digital Servo is built for that task with digital regulation, waterproof construction and a JR plug layout. The black housing with metallic centre section and splined output shaft is shaped for installation in common model applications where steering, throttle or other linkages need controlled travel. Its 0.17-second response supports quick actuation, while the 10 kg torque rating provides the force needed for demanding control duties. Ball bearings support the output shaft for smooth running, and the metal gear train is designed for direct transfer of servo movement to the connected horn and linkage. Included mounting hardware expands setup options with a single-arm horn, an X-shaped horn with multiple linkage holes, rubber grommets and a fastening screw. The 3-wire lead uses the familiar red, black and white layout seen across many RC installations. In an RC car, the servo can manage steering inputs through the splined shaft and horn geometry; in a boat or other hobby mechanism, it can drive throttle or moving control parts with the same compact format. The waterproof design also suits outdoor running where spray and damp conditions are part of the session.  Warning! Not suitable for children under 14 years.

RC servos

CS-17 Digital Servo, RC servo, waterproof

€34.99

The CS-17 brings digital servo control, waterproof construction and 17 kg actuating force into a compact RC component built for precise movement in demanding model setups. With a stated speed of 0.19 sec and a JR connector on the 3-wire lead, it suits steering, throttle and brake functions where clean signal response and dependable installation matter. The housing combines black end caps with a silver centre section, and the top output shaft is metal with a splined interface for secure horn mounting. Side tabs with screw holes support fixed installation in model vehicles or boats, while the included single-arm horn and 4-arm horn offer different linkage layouts. Multiple adjustment holes on the horns make it possible to alter leverage and control travel to match the mechanism in use. Rubber grommets are included for vibration-damped mounting, and the central fixing screw secures the horn to the output shaft. In an on-road chassis, off-road build or boat hull, the servo can be assigned to the moving function that needs measured, repeatable input. The combination of digital operation, waterproof design and included mounting hardware makes the CS-17 a focused choice for hobby workbenches, replacement jobs and fresh RC builds.  Warning! Not suitable for children under 14 years.

RC servos

CS-7 Digital Servo, RC servo, waterproof

€29.99

The CS-7 Digital Servo brings fast digital control to RC installations that need crisp, repeatable movement. With a stated transit time of 0.17 s, this regular-size servo suits steering, throttle or other control functions where quick response and accurate linkage travel matter. The black and silver housing carries a waterproof design, adding flexibility for models that run in wet grass, on damp ground or around spray. Inside the compact case, the servo combines a 7 kg force rating with ball bearing support at the output shaft. That layout helps the spline run smoothly when the horn changes direction under load. The top output shaft accepts the supplied servo horns, including a single-arm horn and a 4-arm horn with multiple linkage holes for different geometry choices. Mounting tabs on the case and the included rubber grommets support secure installation in a chassis, frame or other model structure. The attached 3-wire lead uses a JR plug for connection to compatible radio systems. In cars, boats, aircraft or other hobby mechanisms, the CS-7 Digital Servo fits wherever controlled rotary movement needs to be translated into precise mechanical action. Age marking: 14 years  Warning! Not suitable for children under 14 years.

RC helicopters

Cyber Copter IR 2Ch RTF, helicopter, blue

€21.99

The Cyber Copter IR 2Ch RTF blue brings a futuristic helicopter shape together with ready-to-fly handling for fast access to indoor model flying. Its slim fuselage width of 38 mm, blue finish and switchable LED position lights create a crisp look in the air, especially when flights continue into lower evening light. Infrared control keeps the handling focused on the core 2-channel functions, while the integrated gyroscope supports stable flight behaviour during turns and hovering corrections. Left and right trim adjustment allows the flight path to be tuned more precisely to the room and control input. The helicopter reaches speeds of up to 10 km/h, giving short indoor runs enough pace to feel lively without overwhelming the compact format. At 230 mm long and 95 mm high, with a rotor diameter of 190 mm, the model stays manageable in smaller spaces. The low takeoff weight of 35 g adds to that controlled character during living room or hobby room sessions. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime, and charging runs through USB for straightforward turnaround between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 x LR03 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8+

RC helicopters

Cyber Copter IR 2Ch RTF, RC helicopter, red

€21.99

The Cyber Copter IR 2Ch RTF brings compact helicopter flying into a format that is easy to start and satisfying to control. Its red fuselage, 230 mm length and 190 mm rotor diameter create a nimble indoor model that moves through living rooms, hallways or open office spaces with a light 35 g takeoff weight and a top speed of up to 10 km/h. An integrated gyroscope supports stable flight behaviour, while the infrared control system works with 2 channels for direct command over direction changes. Left and right trim adjustment allows finer correction when the helicopter drifts, helping each flight line stay cleaner across repeated takeoffs and landings. Switchable LED position lights can be activated from the transmitter, which keeps the model clearly visible when room light drops at dusk. The built-in 3.7 V / 150 mAh LiPo flight battery delivers up to 8 minutes of runtime per charge, and USB charging keeps turnaround simple between sessions. The ready-to-fly setup keeps the focus on flying rather than preparation, with the model, remote control, USB charger and 3 x LR03 / AAA transmitter batteries included. Recommended from 8 years. Short practice runs around furniture, controlled hovering in open floor space and evening laps with the LEDs switched on all suit the compact format well.

RC helicopters

Cyber Copter IR 2Ch, RC helicopter, RTF

€21.99

The Cyber Copter IR 2Ch brings compact helicopter flying into a ready-to-fly format with a modern grey fuselage and a focused control layout. At 230 mm long, 95 mm high and with a 190 mm rotor diameter, this RC helicopter stays compact enough for indoor sessions while reaching speeds of up to 10 km/h. Its flight system combines infrared control with 2 channels for clear directional input, and the integrated gyroscope helps keep movement steady once airborne. Fine tuning comes from individually adjustable left and right trim, allowing the flight path to be corrected to suit the room and the handling style. The switchable LED position lights are activated from the transmitter, making the model easier to track visually when the light drops at dusk. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime per charge, and the USB charger keeps charging straightforward between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8 Years

RC helicopters

Cyber Copter Rescue, RC helicopter, 2.4GHz

€25.99

The Cyber Copter Rescue brings compact rotor flight into a ready-to-fly format with a futuristic body, a 190 mm rotor diameter and a 2-channel 2.4 GHz radio system. At 230 mm long, 95 mm high and only 35 g in takeoff weight, the model is sized for controlled indoor flying, where short lift-offs, hovering practice and gentle turns can happen in a smaller space. Its 3.7 V 150 mAh LiPo flight battery delivers up to 8 minutes of runtime and supports speeds of up to 10 km/h. Charging runs via USB, making the battery easy to top up from common USB power sources between sessions. The transmitter operates the flight direction and the LED position lights, while the trim function allows left and right correction to match the room and handling input. The integrated gyroscope works continuously in the background to steady the helicopter during flight. Included in the set are the ready-to-fly model, the 2.4 GHz remote control, a USB charger, 3 LR03 AAA transmitter batteries and a manual. The age marking is 8 years. Short practice flights in a living room, hobby room or other indoor area suit the compact dimensions well, especially when learning how throttle and steering interact in the air.

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flip

€25.99

Compact dimensions and quick-response controls give the Cyber Drone IR RTF a lively indoor flight character, with a 125 mm length, 135 mm width and 150 mm diameter that keep the quadcopter agile in smaller spaces. The 45 mm rotor diameter and 50 g ascent weight support a light, nimble feel in the air, while the red finish and blue LED lighting make the flight path easy to follow during turns and short hovering runs. The control setup focuses on clear handling rather than complexity. Individually adjustable trim allows left and right correction when the quadcopter drifts, and the gyro helps keep movements more settled during take-off, hovering and directional changes. A button-triggered Coming Home function returns the quadcopter to its home point, adding a direct control shortcut during indoor sessions. The 360° flip function brings a distinct stunt element, and the 3 speed settings make it easy to switch between measured practice laps and faster reactions. 8Y+. With an 8 minute flight time, the model suits short flying sessions in living rooms, hobby spaces or other open indoor areas where compact manoeuvres and quick turns come into play. A replacement battery with 3.7 V, 600 mAh and Molex connector is available separately for extended session planning

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a format built for quick lift-off and controlled indoor sessions. Its 125 mm length, 135 mm width and 150 mm diameter keep the frame small and nimble, while the 45 mm rotor diameter and 50 g ascent weight support a light, responsive feel as the orange drone moves through turns, short climbs and hovering passes. The Coming Home function returns the quadcopter to its home point at the touch of a button, adding a clear control step during flight. Flight time reaches 8 minutes per charge, powered by the included 3.7 V 600 mAh LiPo flight battery. The ready-to-fly package also includes the IR remote control and a USB charger, so the core flying equipment is already part of the set. EN 71, EN 62115 and EN 4709-001 compliance is stated in the product data, and the age marking is 8 years. Short practice flights, button-triggered flips and pace changes across the 3 speed levels give each session a distinct rhythm. Blue flashing LEDs stay visible as the drone circles through a room, rises for a quick stunt, then settles back into controlled directional inputs.

Model trucks

DAF 95 Master Truck 1:24 scale model kit

€59.99

The Italeri 1:24 DAF 95 Master Truck ZgM captures the flagship character of the Concept 95/380 in a scale model kit shaped around the high-roof Space Cab tractor unit. The cab-over layout, tall roofline and three-axle rear arrangement give the finished truck the distinctive long-haul stance that made the original DAF 95 stand out on European roads. The full-size vehicle was developed as a further step in the Space Cab series, and this kit reflects that more advanced design through its body lines, grille treatment and marked 95 380 ATI identity. The original truck paired a 6-cylinder ATI Advanced Turbo Intercooling engine with a soundproof cabin and advanced shock absorbers, details that define the character of the subject being built here. Visible truck elements such as the side mirrors, steps, tank sections, rear mudguards and under-run protection help create a more complete tractor-unit silhouette once assembled. The included decal sheet extends that realism with cab stripes, instrument panel details, country plates and small service markings. With a stated assembly time of 600 minutes, the build lends itself to a steady bench session where painting, decal placement and final detailing shape the result. Paints are required separately. Once completed, the model fits naturally into truck collections, workshop shelves or transport dioramas, where the Space Cab profile and fifth-wheel layout give it a clear heavy-haul identity.  Warning! Not suitable for children under 14 years.

RC tires & rims

Desert W.4x Tyre Wheel Set, RC wheels

€33.99

The Desert W.4x Tyre Wheel Set brings a rugged off-road look to RC vehicle builds with black tyres, black multi-spoke rims and a tread pattern cut for rough terrain. In the workshop or at the track, the set gives scale-focused off-road models a more purposeful wheel setup with a strong visual link to crawler and desert-style machines. The tyre surface shows deep, widely spaced tread blocks that are shaped to work across loose ground, gravel and uneven sections. Beadlock-style rim detailing adds a technical appearance around the outer edge, while the central mounting hole marks the set out as a running component rather than a display part. The sidewall styling visible on the tyres reinforces the off-road character and gives the wheels a more realistic scale presence once fitted. With tyre and rim already combined, the set concentrates on one of the most visible areas of an RC build and changes both stance and terrain focus in a single swap. On shelf-built crawlers, trucks or other off-road RC models, the wheel set suits projects that aim for a tougher terrain profile and a more planted visual finish. It also works well as a replacement set when an existing build needs fresh wheels with a deeper tread layout for rougher running conditions.

Model aircraft

Dornier Do 217 K-1/K-2 Aircraft Kit 1:72

€36.99

The Italeri Dornier Do 217 K-1/K-2 with Fritz-X guided bombs captures a distinctive World War II aircraft in 1:72 scale, combining the broad wing layout, twin-engine configuration and glazed nose of the Luftwaffe bomber in a detailed plastic kit. The subject represents the Do 217K variant, developed with a reinforced fuselage, redesigned wing surfaces and upgraded engines, and adapted to carry the Ruhrstahl SD 1400 Fritz X on an underwing pylon. The build is shaped around multiple injection-molded sprues with finely engraved surface detail, separate fuselage halves, wing sections, propellers, landing gear parts and transparent canopy elements. These clear parts help define the cockpit area and nose glazing, while the external stores and pylon components give the finished aircraft its characteristic guided-bomb configuration. The decal sheet, screen printed by Cartograf, is arranged for 6 versions and adds crosses, code letters, serial markings and maintenance stencils for a more complete historical finish. Figures are not included. On the workbench, the combination of structural airframe parts, clear glazing and detailed markings supports a focused aircraft build with plenty of painting and finishing work. Once assembled, the 1:72 scale format suits shelf display, diorama use or a line-up with other historic aircraft subjects from the same era.  Warning! Not suitable for children under 14 years.

RC brushless motors

Dragster Turbo 2.0, brushless set, 1:10

€59.99

The Dragster Turbo 2.0 brushless set brings a matched drive upgrade to 1:10 RC models with a 2600 kV sensorless brushless motor and a 60 A waterproof ESC. With a no-load speed of 20,720 RPM and short-term output of about 310 W, the set is built for hobby setups that call for stronger acceleration and a more direct throttle feel. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, giving clear reference points for installation planning in suitable chassis. Its continuous current is 42 A. The ESC adds 80 g and is designed for 2S LiPo or 6-cell NiMH batteries at 7.4 V. A forward, brake and reverse function is integrated, and the controller handles 60 A continuous current with 360 A peak current. The T-Plug connector defines the battery-side connection, while the included switch module and receiver lead support standard RC wiring layouts. This set suits rebuilds, performance-focused replacements and fresh 1:10 projects where motor and controller need to work as a coordinated pair. A brushless motor, speed controller and instructions are included. A battery pack, charger and radio gear are required separately.  Warning! Not suitable for children under 14 years.

Pinions & gears

Drakuro Center Differential, RC spare part

€41.99

The center differential with spur gear is a dedicated drivetrain spare part for the Drakuro platform from Carson Modelsport. Listed for the 1:8 4WD chassis and described as a center differential with main gear, it targets the transmission area where power is managed within the named vehicle layout. As a models supplies component, this part is intended for repair, servicing, or replacement work on the specified chassis rather than as a universal fitment. The data links it directly to the Drakuro BL 3S series, including the Anthracite/Red version 500409096 and the Blue version 500409097, which helps place the part within the correct vehicle family. The combination of center differential and spur gear identifies a core drivetrain assembly used in the middle section of the chassis. In workshop use, this kind of replacement part supports planned maintenance after regular running sessions or the renewal of worn transmission components on the matching Drakuro model. For hobby benches focused on keeping a 1:8 4WD vehicle ready for the next outing, the named chassis reference gives a clear platform match.

Pinions & gears

Drakuro Differentials Front and Rear Set

€49.99

The Drakuro differential set covers both key drivetrain positions with 2 units for the front and rear of the chassis. Named in the data as Drakuro Differentials front and rear, this spare part set is aimed at 1:8 4WD running gear where the transmission layout depends on a differential at each axle. Within a 4WD chassis, the differential is the component that distributes drive across the axle while the model is under power. Replacing worn transmission parts can restore the mechanical basis the chassis was designed around, especially when both axle positions are serviced together rather than one side at a time. The set format keeps the front and rear assignment clear and suits maintenance work focused on the drivetrain rather than body or electronics parts. The product data identifies the pair specifically for the Drakuro platform, making the application more precise than a generic RC spare. This kind of replacement set fits naturally into workshop stock for repair, scheduled servicing, or rebuilding a used chassis. For hobbyists working on a Drakuro 1:8 4WD model, the 2-piece layout provides the core differential parts needed for the front and rear transmission positions in one purchase.

Pinions & gears

Drakuro Motor Pinion Gear, accessory, 12T

€8.49

The Drakuro Motor pinion gear is a steel drivetrain spare part built around a clear specification: 12 teeth, a 5 mm bore and a grub screw for fastening on the motor shaft. For compatible 1:8 4WD chassis layouts, that combination gives model-building enthusiasts a defined replacement choice when the original pinion needs to be exchanged. The steel construction focuses this part on the drive system, where tooth count and bore size need to match the installed setup. The grub screw secures the pinion on the shaft, while the 12T format provides the stated gearing reference for maintenance or repair. The product data also links this part to Drakuro BL 3S vehicle versions in anthracite/red and blue, which helps place it within the Drakuro range without overstating compatibility beyond the stated information. In workshop use, this kind of spare part belongs in routine drivetrain servicing, rebuilds after wear, or a direct replacement during ongoing running sessions. For hobby benches that stay organised by exact dimensions and tooth counts, the 5 mm bore and 12T layout make this gear easy to identify within a parts stock.  Warning! Not suitable for children under 14 years.

Model tanks

DUKW Amphibious Vehicle Model Kit 1:35 Scale

€32.99

The Italeri 1:35 DUKW Amphibious Vehicle model kit brings a landmark military transport into a detailed scale build, combining the long 6x6 layout of the General Motor CCKW-353 with the welded hull that allowed the full-size vehicle to move between ship, surf and shore. In model form, that unusual combination gives the finished subject a striking silhouette, with truck running gear set into a boat-shaped body built for amphibious operations. The original vehicle used a 4,400 cm3 6-cylinder engine, three differentials and 6 driving wheels, and those engineering roots shape the character of this kit. Horizontal rib reinforcement on the hull adds another defining visual feature, setting the DUKW apart from standard transport trucks of the period. The full-size vehicle could carry a 2,400 kg payload or 25 fully equipped troops, which explains its broad use by the U.S. Army, U.S. Marines and Allied forces across multiple theatres of war. This edition also includes a new decal sheet for 4 versions, opening several historically grounded finishing directions for the completed model. The subject suits builders drawn to WWII logistics vehicles, beach landing scenes and transport-focused dioramas. Markings linked to operations such as Normandy, Salerno, Anzio and Pacific landings give the completed build a strong historical setting, whether placed on a display shelf or worked into a larger coastal scene.

Military aeroplane models

EA-18G Growler Aircraft Model Kit 1:48 Scale

€43.99

The Italeri 1:48 EA-18G Growler brings a modern carrier-based electronic warfare aircraft into scale form with the long, twin-seat fuselage and naval jet profile derived from the F/A-18F Super Hornet. As a detailed plastic kit, it focuses on the specific configuration that sets the Growler apart, including the dedicated electronic warfare installation in place of the standard 20 mm cannon and the external stores associated with its mission. The full-size aircraft uses General Electric engines and reaches a maximum speed of Mach 1.8, with flight performance described as similar to the main carrier-based aircraft in U.S. Navy service. The real aircraft operates with a 2-man crew made up of a pilot and a WSO, and that tandem arrangement shapes the cockpit and canopy layout of the model. Marking options shown for the kit cover 3 aircraft versions, including U.S. Navy VAQ-134, U.S. Navy VAQ-137 and Australian 6 Squadron subjects. The decal sheet also extends to instrument panels, external fuel tank markings, AIM-120 details and AN/ALQ99 pod markings, supporting a more complete finishing stage. With a stated assembly time of 600 minutes, this kit suits a slower, detail-led build on the workbench and a display finish once complete. Paints, tools and cement are required separately.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH 2,2A, charger, 5-8 cells

€23.49

The Easy Charger NiMH 2,2A brings a focused charging setup to RC bench work with a 2.2 A maximum charging current, 25 W output power, and support for NiMH battery packs with 5-8 cells. Delta peak cutoff is built in, so the charger monitors the pack during charging and stops the process at the defined point for this battery type. Its AC 100-240 V input makes the unit suitable for common mains voltages, which helps when the charger moves between home workspaces, club tables, and event locations. The Tamiya charging connector keeps compatibility clear for packs that use this established plug format. Included contents are the charger, power cable, and manual. 14 years marks the recommended age. On a hobby bench, the compact specification keeps the task simple: connect a compatible NiMH pack, power the charger from the mains, and let the delta peak function handle the charge endpoint. It also fits neatly into an RC equipment setup where a dedicated charger for 5-8 cell NiMH packs is needed alongside running gear and workshop essentials.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH 3A USB-C, charger

€16.99

The Easy Charger NiMH 3A USB-C brings a compact charging setup to RC workbenches and track bags with USB-C input, NiMH support and a maximum charging current of 3 A. Designed for 4-8 cell NiMH battery packs, it combines a modern power connection with the familiar charging needs of many hobby-grade RC systems. Its input range of 9-20 V DC allows operation from compatible USB-C power supplies, adding flexibility when charging away from a fixed hobby station. Delta-peak cut-off manages the end of the charging cycle for NiMH chemistry, so the charger is built around the charging behaviour these packs require rather than a one-size-fits-all approach. The Tamiya connector gives a direct link to compatible battery packs, which keeps the setup focused on common RC battery connections. Charger, USB-C charging cable and instructions are included. In practice, this charger suits workshop preparation before a run, battery top-ups between sessions and compact transport in an RC kit. The 14 Years age marking is stated in the product data, and the charger fits naturally into hobby routines built around NiMH-powered models and accessories.

RC electric motors & controllers

Electric Motor 540 23T-BB, RC motor, 6 V

€14.99

The 540 23T-BB electric motor brings classic brushed drive technology to compatible RC vehicle builds with a clearly defined 540 format, 23 turns and 50 W output. A nominal voltage of 6 V and a working range from 4.8 to 8.4 V give model-building enthusiasts concrete figures for planning a suitable drivetrain setup around the motor. Its 19,900 rpm speed, 2.2 amp current consumption and 29 N mm torque outline how this unit is positioned within an RC system: fast enough for responsive running, yet specific enough for considered replacement or tuning decisions. The included cable adds a practical installation detail straight from the box contents, while the single output shaft and compact cylindrical housing suit the familiar layout used in many powered model vehicle applications. As a standalone motor component, it fits naturally into workshop routines such as refreshing a worn drive unit or assembling a new compatible chassis. In use, this motor suits hobby bench setups where voltage, turns and output need to be matched carefully to the rest of the electronics. The 14 Years marking places it within the hobby-focused end of the range, making it a fitting choice for model vehicle enthusiasts working on maintenance, upgrades or fresh RC builds.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Electric Motor 540 80T-BB, RC motor, 6 V

€14.99

The 540 80T-BB electric motor brings classic brushed RC drive hardware into compatible vehicle builds with a 6 V nominal voltage, 80 turns and a measured output of 15 W. Its cylindrical 540 format, output shaft and attached cable create a straightforward basis for drivetrain installation where controlled delivery and clear mechanical feedback are part of the appeal. A voltage range of 4.8 to 8.4 V opens the motor to different matching electrical setups, while the stated current consumption of 0.7 amps adds a concrete reference point for planning the drive system. The rated speed of 5,900 rpm works alongside 130 Nmm torque, giving the motor a balance that suits applications where usable pull and steady response matter alongside rotation. The included cable is already fitted to the motor, so the connection side is present from the start. Age marking: 14 Years. In an RC workshop, this motor fits naturally into replacement projects, fresh chassis builds or drivetrain changes that call for a 540-size brushed unit. It also suits hobby setups where the focus lies on matching voltage, torque and rpm figures carefully to the rest of the running gear for a well-judged result.  Warning! Not suitable for children under 14 years.

Trailers & accessories

European Tractors TYRES and RIMS 1:24 kit

€26.49

European Tractors TYRES and RIMS brings 1:24 scale wheel detail to truck model projects with a dedicated accessory kit built for European tractor units. The box contains 7 tyres and 7 rims, giving the build the specific wheel equipment needed to refine a tractor layout with front, rear, and spare wheel positions. The tyre and rim combination is designed as a detailed plastic kit, while the tyres themselves are shown as soft rubber parts for a more realistic finished appearance. The set uses 100% new moulds, supporting crisp rim structure and clearly defined wheel components during assembly. Front wheel equipment is supplied in size 385/65 R22.5, while the rear wheel equipment is supplied in size 315/80 R22.5, matching the different axle roles found on European tractor units. A decals sheet is included to apply sidewall markings and size graphics, adding another layer of scale-specific finish to the completed wheels. With an assembly time of 600 minutes, the kit suits builders who want to spend time on wheel detail rather than treating it as a background part of the model. It can be used to upgrade a tractor unit build, replace kit wheels, or add a more specific tyre setup to a 1:24 display project. Age marking: 14 Years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio system into a 4-channel transmitter built for fast, exact control on the track. High resolution signal processing and a redesigned electronic layout work together for a notably direct steering response, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. The set includes the KR-242XT receiver with long antenna for telemetry use. Its menu structure goes far beyond basic trim changes. Steering functions cover servo travel limit, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, auto-start, idle-up, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. A display, conversion calculator, VR information, sound settings and adjustable menu speed keep setup work clear at the bench between runs. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V, or a LiPo rechargeable battery 2S 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 2.4 GHz

€399.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 2.4 GHz transmitter built for fast, exact control. Its redesigned electronics deliver a highly direct steering feel and, in XT Advanced Mode, transmission speed up to 3 times faster than the EX RR. The included KR-242XT receiver with short antenna completes the core setup for telemetry use. A 4-channel PWM or serial layout gives the system a broad technical base for competition-focused RC driving. Steering functions include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim or balance and servo reverse. Throttle and brake adjustment extends further with 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way switching, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The transmitter measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving a substantial handheld format for longer sessions at the track. Timer functions include lap history, trigger start, lap navigation and alarm mode for structured race practice. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately. Age 14+  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC LDT, transmitter, 4-channel 2.4 GHz

€439.99

The EX-NEXT BASIC LDT brings KO Propo's current XT radio standard into a 4-channel transmitter built for fast, exact control. High resolution signal processing and the redesigned electronics work together for a notably direct steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. In the hand, the 240.5 x 163.0 x 107.2 mm format and 551 g weight create a substantial control unit for focused driving sessions. Its menu depth goes well beyond basic steering and throttle adjustment. Steering settings include servo travel limit, trim, sub-trim, trim rate, 2-stage forward and reverse speed, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake functions add 3-stage forward and reverse speed, acceleration, push control, auto-start, idle-up, override, reverse, brake-in and hand brake. Channels 3 to 8 can be assigned for 2-way, 3-way and 5-way functions, analog control, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. Telemetry features cover RF mode, pairing, Real-Time ICS and battery failsafe, while timer functions include lap history, trigger start, alarm mode and lap navigation for track-focused running. The set comes with 2 KR-242XT receivers with short antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a LiFe rechargeable battery 2S 6.6 V or a LiPo rechargeable battery 2S 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC RC transmitter, 4-channel 2.4 GHz

€399.99

The EX-NEXT BASIC RC transmitter brings KO Propo control hardware into a focused 4-channel 2.4 GHz format built for fast, accurate driving. XT radio technology and newly developed electronics work together for highly precise response, with XT Advanced Mode reaching up to 3 times the transmission speed of the EX RR. The result is a notably smooth steering feel and direct control input that suits racing, competition and high-performance RC models. Its setup depth goes well beyond basic trim functions. Steering adjustment covers servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim balance and servo reverse. Throttle and brake tuning add 3-stage forward and reverse speed, ABS function, acceleration, neutral brake, brake-in, hand brake and override. Timer functions include lap history, trigger start, lap navigation and alarm mode, while system tools add display settings, menu speed, battery information and a conversion calculator. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the unit a substantial hand-held format for track sessions and bench setup alike. The set includes 1 KR-242XT receiver with long antenna. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery 6.6 V or a 2S LiPo rechargeable battery 7.4 V are required separately.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT Basic, transmitter set, 4-channel 2.4 GHz

€439.99

Fast response and fine control define the EX-NEXT Basic transmitter set for ambitious RC driving. The 4-channel 2.4 GHz system uses the XT radio standard and combines the EX NEXT master unit with LCD, Xpansion Unit 2 EXP 201, Extension Unit 2.1 Basic and Grip Unit 2 Basic in one configured setup. The electronics platform supports XT Telemetry as the factory RF mode and reaches up to 3x the transmission speed of the EX RR in XT Advanced Mode. Real-Time ICS, pairing functions, battery failsafe and a wide system menu expand the setup range beyond basic driving adjustments. The transmitter measures 240.5 x 163.0 x 107.2 mm, weighs 551 g excluding batteries and has a power consumption of 200 mA. Timer functions include trigger start, lap history, lap navigation, alarm mode and start stop control, adding useful race-day data handling alongside the driving setup. Compatible receivers are listed as KR 420XT and KR 242XT, and this version comes with 2 KR-242XT short antenna receivers. Power is supplied separately via 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery at 6.6 V or a 2S LiPo rechargeable battery at 7.4 V. The broad menu structure suits competition sessions, multi-car pit setups and detailed tuning work on performance-focused RC models.  Warning! Not suitable for children under 14 years.

RC remote controls

EX-NEXT BASIC, transmitter, 4-channel 2.4 GHz

€419.99

The EX-NEXT BASIC transmitter brings KO Propo control technology into a focused 4-channel 2.4 GHz format built for precise RC driving. XT radio standard and high-resolution signal processing work together for very fast response and a notably smooth steering feel, while XT Advanced Mode reaches up to 3 times the transmission speed of the EX RR. On the bench or at the track, that combination supports direct inputs and clean corrections through technical sections. Its control architecture goes well beyond basic steering and throttle adjustment. Steering functions include servo travel limit, trim, sub-trim, trim rate, forward and reverse speed in 2 stages, characteristic curve, punch, feel, response rate, auto-steer trim and servo reverse. Throttle and brake settings add 3-stage forward and reverse speed, ABS function, push control, acceleration, neutral brake, override, reverse, brake-in and hand brake. Channels 3-8 can be assigned for 2-way, 3-way and 5-way operation, analog, gyro, twin servo, 4WD steering, AMP mixing, throttle mixer and trim. The housing measures 240.5 x 163.0 x 107.2 mm and weighs 551 g excluding batteries, giving the transmitter a substantial hand feel for longer sessions. Model selection, model copy, model reset and 50 memory slots support fleets with different setups, while the timer menu adds start timer, trigger start, lap button and lap navigation for repeatable practice runs. 4 x AAA batteries, 4 x AAA NiMH rechargeable batteries, a 2S LiFe rechargeable battery or a 2S LiPo rechargeable battery are required separately.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger Max 15, charger, 15A 300W

€79.99

Expert Charger Max 15 brings charging, signal measurement and bench testing together in one compact unit for RC and model-building setups. With up to 15 A charging current and 300 W on DC or 100 W on AC, it handles everyday pack management with the output needed for a broad mix of battery types. The supported battery range covers LiPo, LiHV, LiFe, LiIon and LTO packs from 1-6 cells, NiMH from 1-16 cells and Pb from 1-10 cells. An integrated 1 A balancer equalises cell voltage during charging, adding a dedicated function for lithium pack care. Beyond charging, the unit reads PWM, PPM and SBUS signals and measures both voltage and internal resistance, giving useful data for checking electronics on the bench. ESC test mode adds another practical workshop function, and the adjustable power supply broadens the device's role in model maintenance and setup work. A 2.0" IPS display with 320 x 240 pixels keeps menus and readings clear during operation. AC input from 100-240 V and DC input from 7-28 V support use in different workshop and field power situations. With dimensions of 108 x 106 x 60 mm and a weight of 350 g, the charger fits easily into RC pit gear, workbenches and transport cases. Included are 1 charger, 1 AC cable and 1 USB A to USB A upgrade cable. Age 14+  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 2A Charger Set, battery set

€44.99

The Expert Charger NiMH 2A Charger Set combines a compact charging unit with a 7.2 V 2500 mAh NiMH racing pack for RC running sessions with less downtime between uses. Its 20 W output and charging current of up to 2 A give the charger a clear, focused role on the hobby bench, while the transparent housing, ventilation slots and start stop control shown on the unit underline its workshop-ready layout. Designed for NiMH battery packs from 4 to 8 cells, the charger covers more than a single pack format and suits a range of compatible RC applications. The mains input of 110-240 V supports use with common power supplies, which makes the set practical for club rooms, home workspaces and travel between running locations. A clear status LED keeps the charging state visible during operation, and the automatic shut-off function ends the process once charging is complete. The included mains cable connects the charger directly to the power source, while the matched battery pack adds 2500 mAh capacity in a 7.2 V format. On the workbench, the set supports routine preparation before a driving session and straightforward recharging afterwards. For RC enthusiasts aged 14 years and up, it brings together charger, battery and connection standard in a compact format that fits regular hobby use.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 2A, battery charger

€22.99

The Expert Charger NiMH 2A is built for RC and model-building enthusiasts who need a dedicated charger for compatible NiMH battery packs. With support for 4-8 cells, a maximum charging current of 2 A and up to 20 W output power, it covers a practical range for regular workshop charging while keeping the setup focused and easy to handle. The charger runs on 110-240 V input voltage and connects through a TAMIYA plug, making it suitable for many established hobby battery formats. A clearly visible status LED keeps the charging state readable during use, while the Start/Stop control shown on the unit adds direct handling at the charger itself. Automatic cut off manages the charging process with a defined stop function for compatible packs. Cooling vents on the housing support airflow around the unit during operation, and the mains cable is included for immediate connection to a power outlet. On the workbench, in the hobby room or as part of a regular RC maintenance setup, this charger fits neatly into the routine between driving sessions. The set includes the EXPERT CHARGER NiMH 2A, a mains cable and a German/English manual.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 4A Charger Set, battery

€69.99

The Expert Charger NiMH 4A Charger Set combines a compact charger with a 7.2V 4000mAh NiMH racing pack for RC vehicle use and workshop-ready battery care. Automatic shut-off ends the charging process when the cycle is complete, while the status LED gives a clear visual readout during each session. The charger accepts input voltage from 110V to 240V and supports LiPo, LiHV, LiFe and NiMH battery types. Compatible cell counts cover LiPo 2-4S and NiMH 5-8 cells, opening the set to a wide range of common RC power formats. Charging current adjusts from 0.5A to 4A in 0.5A steps, so the output can be set to suit the connected pack rather than running at one fixed rate. Maximum output power reaches 50W. Included in the set are the charger, the NiMH drive battery, a mains cable and 1 XT60 to NiMH adapter cable. On the workbench, the set supports routine charging before driving sessions, battery swaps between runs and straightforward preparation of compatible packs. The included 7.2V 4000mAh racing pack also gives the set an immediate starting point for RC models that run on NiMH power. Radio gear, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Military aeroplane models

F-14A Tomcat 1:72 Aircraft Model Kit with Decals

€32.99

The Italeri F-14A Tomcat in 1:72 scale brings one of the defining U.S. Navy fighters of the 1970s through 1990s to the workbench as a detailed aircraft model kit. At 26.5 cm long, the finished jet has the long nose, twin-engine layout, twin-tail profile and tandem 2-seat cabin that made the Tomcat instantly recognizable in carrier operations and interceptor roles. This assembly kit is based on ESCI moulds and uses recessed line panels across the airframe, giving the surface a crisp engraved look that supports careful painting and weathering. The subject itself carries strong technical character: the full-size F-14A used variable-sweep wings and 2 afterburning turbofans, reached Mach 2.34 and served in air superiority duties after replacing the F-4 Phantom II. The included super decals sheet opens 4 finishing versions, with squadron markings, serials, national insignia and stencil data for different aircraft appearances. Assembly is required, with a stated build time of 600 minutes. On the bench, the 1:72 format suits focused cockpit painting, landing gear work and precise decal placement across wings, tails and fuselage panels. Once completed, the F-14A Tomcat fits naturally into naval aviation displays, Cold War aircraft collections or diorama scenes that call for a carrier-based fighter with a strong historical presence.

Military aeroplane models

F-15C Eagle Aircraft Model Kit 1:72 Scale

€22.99

The Italeri F-15C Eagle brings a modern air-superiority aircraft into 1:72 scale with a finished model length of 27.0 cm and the sharp profile that made the Eagle one of the defining fighter designs of its era. As a detailed assembly kit, it focuses on the distinctive twin-engine layout, broad wing planform and single-seat configuration that give the aircraft its unmistakable silhouette in flight and on display. This version draws on the later F-15C standard, the variant used by the U.S. Air Force, U.S. National Guard and several international air arms. The subject itself adds strong historical context, from its 1970s development for air-superiority missions to its combat use during the Gulf War in 1991. The aircraft's real-world specification also shapes the character of the build, with reference points such as the 20 mm M61 gun, a wide range of air-to-air missile options and 2 Pratt & Whitney F-100 after-burning turbofan engines capable of pushing the Eagle to Mach 2.5. A color instruction sheet supports the painting and marking process. On the bench, the kit suits builders who enjoy military aviation subjects with recognizable operational history and multiple finishing paths. The 4-version decal selection opens different marking choices, while the completed aircraft sits naturally in a collection of modern combat jets, Cold War aviation subjects or U.S. fighter types. Minimum age: 14 years

Model car kit

Fiat 131 Abarth Rally OLIO FIAT Model Kit

€39.99

The Fiat 131 Abarth Rally OLIO FIAT model kit brings a landmark competition car into 1:24 scale with the wide-arched body, bonnet and side air intakes, and the bold rally livery that made this version instantly recognisable on gravel stages. Based on the 2-door Fiat 131 sedan and reworked by Abarth, the full-size car is reflected here as a detailed assembly project with a strong motorsport character. The subject itself carries rich rally history, with the Fiat 131 Abarth competing from 1976 and earning 3 World Rally Championship constructors' titles, a FIA Drivers' Cup and a drivers' championship. That background gives the finished build a clear place in competition history rather than a generic road-car look. The kit features rubber tyres for a more convincing wheel finish, a new decals sheet for the OLIO FIAT markings and race graphics, and black acetate splash guards that match the period rally setup. The body livery is tied to one of the iconic sponsor schemes associated with international competition in that era. During the build, the cockpit, exterior trim and competition markings come together into a display piece with the visual tension of a car caught mid-stage, dust trailing behind on a narrow rally road. Assembly is required and takes 600 minutes. Recommended age: 14 years and over.

Model car kit

Fiat 500 F Upgraded Edition Model Kit 1:12

€124.99

The Italeri 1:12 Fiat 500 F Upgraded Edition model kit recreates the most classic version of the Nuova 500, the compact Fiat that became a defining sight on Italian streets. Its rounded bodywork, compact proportions and folded-roof silhouette give the finished car a strong period look, while the 1:12 scale leaves room for visible trim, interior surfaces and body contours to read clearly once assembled. This assembly kit centres on the 500 F introduced in 1965, the version noted for front-hinged doors, a new frame and a wider windscreen. The upgraded moulds support cleaner shaping across the body shell and help bring out the small car's distinctive lines. Build options for the top allow an open or closed roof appearance, so the finished car can be set to match different display preferences. Screenprinted markings add model-specific finishing detail, and the classic Fiat 500 F layout gives the build a recognisable reference point for historic car collections. On a shelf, desk or in a display cabinet, the finished model carries the character of a compact city car that shaped post-war motoring culture. The opening panels invite a closer look at the build, while the steerable wheels and suspension add extra mechanical detail during handling and presentation. Assembly time is 600 minutes.  Warning! Not suitable for children under 14 years.

Model car kit

Fiat 500F 1968 Model Kit 1:12 with Opening Parts

€129.99

The Fiat 500F 1968 model kit captures one of the most recognizable compact car shapes in 1:12 scale, building to a finished length of 25 cm. Its 100% new moulds support a sharply defined body shell, interior and exterior details, giving the classic Nuova 500 silhouette clear proportions on the bench and in a display cabinet. This assembly kit focuses on visible structure as much as outer shape. The build includes opening doors, a front bonnet and a rear bonnet, so the finished car can be shown with key panels raised rather than sealed shut. The roof can be completed in an opened or closed configuration, which changes the character of the model from a neat city-car profile to a folded-top version with more of the cabin on show. The kit also allows an Anglo-Saxon version with right-hand drive, adding a distinct interior layout option. Photoetched parts, chromed parts and rubber tires bring extra material contrast to trim, brightwork and running gear. Working suspension and steering wheels give the chassis a more technical finish, making the underbody and wheel areas as engaging as the exterior lines. During display, the model suits both closed-body presentation and open-panel setups that highlight the cabin, trim and mechanical detailing. Assembly is required, with an assembly time of 600 minutes.

Model car kit

FIAT 806 Grand Prix Model Kit 1:12 Scale

€169.99

The FIAT 806 Grand Prix model kit in 1:12 scale brings a landmark 1927 racing car into a large 30 cm format with the long proportions, exposed suspension layout and open cockpit that define early Grand Prix design. Built from upgraded Protar moulds, this assembly kit focuses on the engineering character that made the original FIAT 806 such a notable machine in motorsport history. The full-size car used a 180 HP 12-cylinder engine and was developed with major innovations in chassis, mechanics and bodywork. On the original vehicle, the engine and gearbox unit sat between the two chassis bars to optimize performance and drivability, and that unusual layout gives the model much of its technical interest during the build. More than 400 parts create a dense construction project with room for careful finishing across the body panels, cockpit and running gear. The bonnet opens on the completed model to expose the engine bay, while photo-etched parts and metallic accessories such as screws, nuts and springs bring extra definition to smaller areas. With 600 minutes assembly time, the kit suits a slower, workshop-style build where each stage can be handled with attention to fit and finish. Paints, tools and cement are required separately. Once completed, the working steering and soft rubber tires give the FIAT 806 Grand Prix a convincing period stance for shelf display, cabinet presentation or a motorsport-focused collection.