Model tanks
Model tanks
1:35 BMW R 75 with Side Car
510000315€11.99
Article number: 510000315 Product: 1:35 BMW R 75 with Side Car Model Dim.: 6,6 cm Contains 3 figures. Decal for one version. The new German army made use of the experiences collected in World War I to realize their modern reconstruction based on motorization. In spite of the limitations of the Treaty of Versailles able commanders introduced civilian vehicles into the army, thus creating a motorized mentality. In 1940 already, a battalion consisting of 3 to 4 companies each equipped with 52 motorcycles with sidecars and 4 motorcy-cles (single), was integrated into the motorized infantry and the armored divisions. Moreover, motorcycles were present in nearly all other Wehrmacht units, especially with the reconaissance units and the command, as well as the pioneer and the supply units. Produced in 16.500 units, the BMW R 75 together with the Zijndapp KS 750 formed the nucleus of the motorized units on all theatres of operations, especially in Africa and in Russia. The motorcycle was armored with an MG 34 mounted on the sidecar. On the road, it reached a maximum speed of 92 Km/h.
Model tanks
1:35 German Truck 3to. TYPE S
510000216€26.99
Article number: 510000216 Product: 1/35 German Truck 3to. TYPE S Model Dim.: 17,1 cm Registered by the Wehrmacht under the designation LKW 3,6-36 S 3t Blitz, this truck was the typical example of that practice of unification adopted in 1938 for the construction of civil transport means convertible into military vehicles. Actually, this truck - OPEL without BLITZ - was manufactured for commercial use featuring more or less the same characteristics.
Model tanks
1:35 Kfz. 69 Schwimmwagen
510000313€12.99
Article number: 510000313 Product: 1/35 Kfz. 69 Schwimmwagen Model Dim.: 10,9 cm including 3 figures Decals for one version As the Volkswagen 82 (Kubelwagen) proved very successful during the campaign in Poland, it was necessary to produce everincreasing numbers of this vehicle. Later, Ferdinand Porsche developed an amphibian version of this car, called the Schwimmwagen. The light weight of this vehicle (about 1/2 ton) permitted crossing of muddy areas, since only two men were sufficient to keep this vehicle moving. For reconnaissance and liaison missions, water had to be crossed frequently, which was impossible with other vehicles.
Model tanks
1:35 Motorcycle side car Zündapp KS750
510000317€11.99
Article number: 510000317 Product: 1:35 Motorcycle side car Zündapp KS750 Model Dim.: 6,6 cm CONTAINS 3 FIGURES The Treaty of Versailles forbade the reconstruction of the German army. Nevertheless, its commanders evaded the obstacle by introducing vehicles of the civil production, which was not subject to any limitations. Thus they set up entire companies equipped with motorvehicles, developing in this way a "motorized mentality" among the crews. The Zündapp. with a production total of 18.000 units due to its structure which guaranteed easy and economical handling - was considered one of the most modern accomplishments of the age in the field of motorcycle construction. Because of its extraordinary qualities, the Zündapp could follow and escort the tank units of the Wehrmacht and the Waffen-SS to all theatres of operations, especially in Russia, since the side car was even furnished with heating for hands and feet of the man. Zündapps were distributed to all units of the armed forces, Only after 1943, they were replaced by 4-wheel vehicles. Detailed plastic kit of model Motorrad-Gespann Zündapp KS750 in scale 1:35
Model tanks
1:35 U.S. Motorcycles WWII
510000322€11.99
Article number: 510000322 Product: 1:35 U.S. Motorräder WWII Model Dim.: 6,4 cm D-DAY SERIES - NORMANDY 1944/2014 D-DAY SERIES - NORMANDY 1944/2014 THE BOX CONTAINS 2 MODELS & 2 FIGURES - The United States and many of her Allies used HARLEY DAVIDSON motor-cycles as liaison and staff vehicles. Front line troops also employed for their Military Police these motorcycles to direct traffic and control troop movements.
Model tanks
1:35 VW Typ 82 Kübelwagen
510000312€12.99
Article number: 510000312 Product: 1:35 VW Typ 82 Kübelwagen Model Dim.: 10,6 cm additionally 2 figures are included Decals for one version Rommel was in the first general to use the Volkswagen during the military operation in France. He was so impressed by it that he, afterwards, when he was in charge of the Afrika Korps, reordered an ever increasing number of the vehicles. The K?belwagen distinguished itself immediatley by its enormous efficiency on all kinds of terrain, in spite of its small horse power (hardly 24 HP) and the driver on the rearwheels only.
Model tanks
1/35 Sd.Kfz.251/1 Ausf.D w/Night Vision
540006984€85.05
Article number: 540006984 Product: 1:35 Sd.Kfz.251/1 Ausf.D w/Night Vision The Sd.Kfz.251 Ausf.D with Night Vision Falke was a special variant which was equipped with specialized night vision equipment, the vehicle was designed for reconnaissance and other missions at night and in low-light conditions. The key feature of it was its night vision equipment, which included a range of infrared and ultraviolet lights, as well as a specialized periscope that allowed the crew to see in the dark. Despite its advanced technology, this special variant was produced in limited numbers due to the high cost of the specialized equipment and the difficult production conditions in Germany during the war. The kit includes Magic tracks and a set of early version tracks. Additionally, a figure set of four Nachtjager soldiers is offered for free. Valuable metal width indicators and an array of photo-etched parts are also available to enhance the level of detail in the model. Detailed Plastic Kit
Model tanks
1:35 1/4 Ton 4x4 US Ambulance Vehicle
510000326€11.99
Article number: 510000326 Product: 1:35 1/4 Ton 4x4 US Ambulance Vehicle Model Dim.: 11,8 cm Decals for 2 versions The ubiquitous jeep is perhaps the most all-round vehicle ever constructed. Because it xas ruggedly built and thus able to traverse most types of terrain without suffering structural damage, one of the task assigned to the jeep was that of ambulance service.
Model tanks
1:35 15cm Panzerwerfer 42 auf SWS
510006562€31.99
Article number: 510006562 Product: 1:35 15cm Panzerwerfer 42 auf SWS Length of the model 198 mm NEW DECAL SHEET The Schwerer Wehrmachtschlepper (SWS) was developed as a medium half-track and used to transport supplies to front-line troops or as a towing vehicle for the light artillery. However, on the large rear flat load compartment some other applications have been developed. One modification was the Panzerwerfer 42 auf SWS, a 10 barreled 15 cm Nebelwerfer 42 rocket launched placed over an armored ammunition storage compartment. The rocket launcher, developed as device to create smoke screens, was soon used as real artillery able to launch high-explosive ammunitions. It could shoot the rocktes with impressive and deadly. Detailed Plastic Kit of model 15cm Panzerwerfer 42 auf SWS in scale 1:35
Model tanks
1:35 3.7cm FlaK 43 Flakpanzer IV Ostwind
540006550€88.99
Article number: 540006550 Product: 1:35 3.7cm FlaK 43 Flakpanzer IV Ostwind The long-awaited 1/35 Ostwind, one of Dragon's classic AFVs, is receiving a facelift with the new premium edition. When Dragon's 1/35 Ostwind first debuted a decade ago, it garnered significant attention. The new 2024 premium edition takes it a step further, sparing no expense. In addition to the familiar Magic Tracks, the road wheels showcase the latest design. Furthermore, numerous 3D printed parts have been incorporated, including the meticulously reproduced muzzle brake of the 3.7cm Flak gun and the inclusion of spent bullet casings (x 15). With the addition of an aluminum gun barrel, this 2024 premium version is a must-have collectible for all 1/35 AFV modelers. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 Bedford QL Truck
510000241€36.99
Article number: 510000241 Product: 1:35 Bedford QL Truck The Bedford QL line of military trucks was established in the late 1930s for the British Army to have a more modern and flexible transport vehicle. Following the conclusion of testing in 1940 and in early 1941, the Bedford QLs were distributed to Army Corps, Regiments and other Units. For the duration of the war it was deployed on various fronts, proving to be a highly effective support vehicle for meeting both logistical and transportation needs due to its four-wheel drive and relatively low weight which further enhanced its load capacity. With its flexibility and robustness, it was also used for towing and transporting artillery pieces such as the 6 pounder anti-tank gun and the 40mm Bofors anti-aircraft gun. Equipped with a 72 horsepower 6-cylinder petrol engine, it was also notable for its ease of maintenance and repair, an important feature on the battlefield. Detailed Plastic Kit
Model tanks
1:35 Brit. Crusader Mk.III w/ Tank crew
510006592€36.99
Article number: 510006592 Product: 1:35 Brit. Crusader Mk.III m. Besatzung Designed at the beginning of the Second World War, the Crusader was one of the most important British "Cruiser" tanks reaching a production of over 5,000 units. Equipped with Christie suspension with large diameter rolling wheels, the Crusader possessed remarkable driving skills on rough terrain. The first versions of Mk. I and Mk. II were armed with a 2 pdr cannon. later replaced by the more powerful 6 pdr cannon. in the Mk.III version. Lacking adequate armor against enemy fire, it was also very vulnerable to enemy mines and anti-tank guns, and its armament was often inadequate in front of similar German vehicles. However, when used in a coordinated way, they managed to achieve good results. Detailed plastic kit
Model tanks
1:35 Carro Armato P40
510006599€36.99
Article number: 510006599 Product: 1:35 Carro Armato P40 The early years of WW2 highlighted the inadequacies of Italian medium tanks in modern warfare, which was now characterized by clashes between heavily armed and heavily armored tanks, and also by the use of more effective and lethal anti-tank weapons. Following detailed analysis of German and wartime opponents British and Soviet military vehicles, a 26 ton heavy tank was created. This new tank, which underwent several design changes over time, incorporated more modern features such as inclined front plates, a more powerful and better performing 420 HP diesel engine and a more suitable main armament, the 75/34 Ansaldo gun. The P26/40 as it would forever be known, unfortunately retained some obsolescent features that were characteristic of Italian armoured vehicle production from the mid 1930s, namely the armor plate riveting snd the leaf spring suspension system. Detailed plastic kit
Model tanks
1:35 Commando Car
510000320€12.49
Article number: 510000320 Product: 1/35 Gefechtswagen Model Dim.: 9,5 cm 1 FIGURE INCLUDED Much work was carried out in the USA and Britain to design special airborne vehicles to drop behind the enemy lines. Willys MB-Jeeps engaged in helping the Infantry by clearing snipers and other commando tasks. Generally manned by a sergeant and a trooper this vehicle was modified in many respects. It was armed with no fewer than five machine guns and had additional tanks for 135 l. of fuel.
Model tanks
1:35 Dt. Sd.Kfz.138 Marder III Ausf. H
510006566€31.99
Article number: 510006566 Product: 1:35 Dt. Sd.Kfz.138 Marder III Ausf. H The tank destroyer Marder III Sd.Kfz. 138 was developed for the Wehrmacht on the basis of the now obsolete Czechoslovak-made Panzerkampfwagen 38(t). It went into production in 1942 for the needs of the eastern operation area and was used on all fronts until the end of the war. A major improvement was the installation of an effective 75 mm anti-tank gun protected by a slanted steel shield. In order to better protect the soldiers, the engine was placed in the rear part of the vehicle and the weapon system in the middle. With the Marder III, the Wehrmacht had an easy-to-manufacture tank destroyer with high firepower that was capable of fighting the most important tanks of the time. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35 Warning! Not suitable for children under 14 years.
Model tanks
1:35 Dt. SdKfz. 234/2 Puma 8-Rad
510006572€35.99
Article number: 510006572 Product: 1:35 Dt. SdKfz. 234/2 Puma 8-Rad The German armored car ‘Schwerer Panzerspähwagen Sd.Kfz. 234/2’ known as "Puma", was developed and produced by the German war machine in the closing years of WW2. The vehicle proved to be an excellent mix of mobility, protection and firepower which was built upon the operational experience gained by the Wehrmacht in the early stages of the conflict. From 1939 onwards the German army had used armored vehicles very effectively for advanced reconnaissance tasks, and also in a ground support role for its troops. The "Puma" was initially a reconnaissance vehicle, but due to its KwK 39 L / 60 50 mm gun it could also be used equally effectively in offensive actions against infantry and other armored vehicles. It was deployed in limited numbers on both the Eastern and Western fronts. The highly effective independent suspension system of the eight wheels and the powerful engine, enabled the Puma to reach speeds of up to 90 km/h on all types of battlefield terrain. Detailed plastic kit in scale 1:35
Model tanks
1:35 DUKW Amphibious vehicle
510006392€32.99
Article number: 510006392 Product: 1:35 DUKW Amphibious vehicle To meet the logistical needs of the US Army landing forces in transferring loads quickly and efficiently from ships to beaches, the American General Motor CCKW-353 2½ t 6x6 amphibious version tactical transport truck was designed and built for this purpose. The basic vehicle components were the same as the GMC road truck with its 4,400 cm3 6-cylinder engine, three differentials and six driving wheels. The DUKW was characterized by a welded hull to make it amphibious, which was then reinforced by horizontal ribs. Its key attribute however was its extraordinary versatility and load capacity. It could carry a 2,400 kg payload or 25 fully equipped troops. DUKWs were deployed extensively in all theaters of war by the U.S. Army, U.S. Marines and the armed forces of numerous Allied countries. Notably, they featured in many significant WW11 beach landings including the D-Day Normandy landings at Utah and Omaha and also at Salerno, Anzio and on the beaches of the Pacific campaign. Kit, instructions, decor
Model tanks
1:35 Ger. Sd.Kfz.167 Sturmgeschütz IV
510000223€30.99
Article number: 510000223 Product: 1:35 GER. Sd.Kfz.167 Sturmgeschütz IV The Sturmgeschütz IV was developed on the chassis of the Panzer IV medium tank to provide the German army with an assault gun capable of effectively serving as a tank destroyer in the later stages of World War II. The Stug IV was equipped with a Stuk40 75mm L/48 high-velocity gun installed in a casemate, protected by armored mantlet, capable of penetrating the armor of major enemy armored vehicles. Distributed to units in the early months of 1944, it supplemented and often replaced the Stug III assault gun, which had experienced a sudden decrease in production in 1943 due to increasingly frequent Allied bomber raids on German industrial areas. Widely deployed on the Eastern Front, the Stug IV was also utilized by armored units and anti-tank detachments of the Wehrmacht in Normandy, where its low profile proved to be particularly difficult to identify in the hedgerows of the French countryside. Warning! Not suitable for children under 14 years.
Model tanks
1:35 GMC 2 1/2Ton.Truck"D-Day 80th Ann."
510006271€25.99
Article number: 510006271 Product: 1:35 GMC 2 1/2Ton.Truck"D-Day 80th Ann." The GMC 2 ½ ton truck was built in an exceptionally high number of units and can be considered the backbone of the logistical operations of the U.S. Army during World War II. Characterized by a very robust and reliable structure, its strength lay in its excellent off-road performance, thanks to its six-wheel drive and effective suspension design. It was produced in numerous variations, including the more common "cargo" versions with open or closed cabins, "long wheelbase," and "short wheelbase." Additionally, various configurations, some developed directly in the field, were tailored for more specific and precise purposes. Its role was crucial in meeting the demanding logistical needs following the initial stages of the Normandy landings, involving the transportation and handling of substantial quantities of troops and materials. Detailed plastic kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 HEMTT Gun Truck
510106510€41.99
Article number: 510106510 Product: 1:35 HEMTT Gun Truck Model Dim.: 28,0 cm FULLY UPGRADE MOULDS Decals for one version The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. In a lot of conflicts, as in Iraq and Afghanistan, it has been often modified by the field workshops, on the specific requirements of the crews, in order to be more and more effective in the hard operating environments, Furthermore some HEMTT versions have been modified to be used in escort and convoys protection duties. Some additional protections and defensive weapons have been add on.
Model tanks
1:35 HMMWV M966 TOW Carrier
510006598€24.99
Article number: 510006598 Product: 1:35 HMMWV M966 TOW Carrier The military vehicle developed for the US Army with the acronym HMMWV ( High Mobility Multipurpose Wheeled Vehicle ), universally known as the "Humvee", is representative of the technological evolution of US "know-how" applied to the creation of extremely flexible, ‘all-condition’ vehicles of which even the "Willys", is still an icon today. The "Humvee" went into production during the 1980s and is characterized by its large dimensions and operational flexibility, due in part to the four-wheel drive and the robust structure, which can withstand the most challenging operational and environmental conditions. Different versions were made for roles such as troop transport, logistics, advanced reconnaissance and target acquisition. The M966 Tow Carrier version was equipped with a Tow missile system mounted on the roof of the vehicle in order to increase the Humvee's offensive potential against tanks and other armored vehicles. Detailed plastic kit in scale 1:32
Model tanks
1:35 IT WW2 PzKpfw.VI Tiger I Ausf.E mP.
510006507€39.99
Article number: 510006507 Product: 1:35 IT PzKpfw.VI Tiger I Ausf.E mP. Model Dim.: 24,1 cm - UPGRADED MOULDS - - Figure not included - Parts for two variants - Photo-etched fret and link by link tracks included - Decals for 4 versions The Tiger I tank, which has been produced in the second half of 1943, was based on the hull of the firstoperational version used in North Africa and Russia. At the beginning this tank had wheels with rubber rim,which will be replaced in the following productions starting from February 1944, but it was equipped withthe new turret with increased protection and better cupola for the commander. Besides some of thesevehicles maintained the characteristic system of dust filters Feifel, and the smoke grenade launchers. On thetanks produced since August 1943 was also applied a magnetic mine paste that will become standard on alltanks of the German Army.
Model tanks
1:35 Kfz.12 Horch 901 typ 40 Early Vers.
510006597€25.99
Article number: 510006597 Product: 1:35 Kfz.12 Horch 901 typ 40 Frühe Ausf. Beginning in the mid ‘30s Germany sought to improve the mobility and mechanization of its Army. One of the more important requirements of its ambitious development program was the adoption of a standard military chassis which would optimize cross country mobility. Among the different versions that were proposed, the medium off road passenger cars, four wheel drive platform, built by Opelwerk and Auto Union found favour.The Wehrmacht used them in various configurations as troop transports, as tow tractors and in reconnaissance roles. The Kfz. 12, built by Horch (Horch was part of the Auto Union group together with Wanderer, Audi and DKW), proved to be very reliable and robust in any operating environment due to its simple but effective design. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 Land Rover 109 "Guardia Civil"
510006542€21.49
Article number: 510006542 Product: 1:35 Land Rover 109 "Guardia Civil" Model Dim.: 12,5 cm UPGRADED MOULDS Decals for 3 versions The Land Rover was certainly one of the most famous symbols of "Made in England" automobile production and is a real milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes realized on 1947. It has been characterized by the 4x4 traction system and by a robust and reliable design able to tackle the most difficult and challenging trails. The aluminum body provide lightness but, at the same time, more resistance against corrosions and more durable in time. In 1971, when the III Series was introduced, more than 1,000,000 of Land Rovers has been produced. Available in two versions: the "standard" one and the "long wheel base". Thanks to its extraordinary versatility was used in both military and civilian duties, and was also produced under license by the Spanish Motor Company Santana during the 70s. Detailed Plastic Kit of model Land Rover 109 "Guardia Civil" in scale 1:35
Model tanks
1:35 Leopard 1A5 MBT
510006481€34.99
Article number: 510006481 Product: 1:35 KPz Leopard 1A5 WA The Leopard 1 tank which entered into service in the mid1960s, formed the backbone of the Armoured Corps of Federal Germany and of several NATO Countries during the "Cold War" period. The Leopard’s battle role was of paramount importance, as it was at the forefront in engaging the overwhelming number of tanks that could be deployed by the armies of the Warsaw Pact. It was armed with the reliable 105mm L7 gun which was capable of using different types of ammunition. The A5 version was a significant improvement with the adoption of a modified turret capable of housing the new computerized target identification and fire control systems. Composite armour plates made of polycarbonate were also added and which significantly increased the protection and resistance from enemy hits.
Model tanks
1:35 Leopard 2A4
510006559€34.99
Article number: 510006559 Product: 1:35 Leopard 2A4 Model Dim.: 27,6 cm SUPER DECALS SHEET FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET - NEW GLUABLE RUBBER TRACKS Entered into service between the late '70s and early' 80s the Leopard 2 is considered one of the best armored vehicles in the world. It has been developed to offer the German "Bundeswehr" a powerful and modern Main Battle Tank able to replace the Leopards 1. The main armament is the 120mm. Rheinmetall L/55 smoothbore gun. Despite is heavy armor, the Leopard 2 is able to reach a significant speed of 65 km/h and it has a good performance on every kind of terrains. From the first versions, the MBT has been constantly improved and updated. The Leopard 2 A4, one of the most widespread version, is adopting an advance fire control system and modern hi-tech materials able to increase the protection capability. A part Germany, the Leopard 2 was able to achieve a good commercial success in many countries as Holland, Turkey, Austria, Greece and many others. Detailed Plastic Kit of model Leopard 2A4 in scale 1:35
Model tanks
1:35 LVT-4 Wasserbüffel
510006752€36.99
The L.V.T. tracked vehicles (an acronym for Landing Vehicle Tracked) were developed to equip the United States armed forces, including the Army and the Marine Corps, with a suitable vehicle for amphibious operations capable of providing a good level of protection. Often known as "Amtrac," they were widely used in the Pacific theater against Japanese forces, as well as in the European theater during the last year of the war. The LVT-4, in particular, represented a significant improvement over previous versions. With the redesign, the engine was relocated to a central position, freeing up the rear of the vehicle for the addition of a ramp that allowed for the rapid loading and unloading of light vehicles or small-caliber artillery pieces to support landing troops. It was the most successful version with the highest number of vehicles produced. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 M1 155mm Howitzer with crew
510006581€28.49
Article number: 510006581 Product: 1:35 M1 155mm Howitzer with crew Model Dim.: 20,9 cm With Artillery Crew - 6 figures included In the years leading up to World War II, the United States undertook a complete modernization of the army's artillery capabilities to increase their efficiency and effectiveness. Whilst great attention was paid to ammunition and artillery trailers, one outcome of this modernization project was the development of the 155/23 howitzer. It was first produced in 1942 as a medium artillery piece and served the US Army throughout the Second World War. It could use different types of ammunition and had a maximum range of 14,600 meters. Very robust and reliable, it also proved to have good operational longevity. It was in fact used by the U.S. Army post WW2 during the Korean War, and indeed during the Vietnam War before eventually being replaced by the more modern M198. Detailed plastic kit in scale 1:35
Model tanks
1:35 M110 Self Propelled Howitzer
510006574€31.99
Article number: 510006574 Product: 1:35 M110 Self Propelled Howitzer Model Dim.: 25,8 cm Decal for 1 versions The self-propelled guns of the M-110 series have represented, for many years, the backbone of the field artillery of the United States Army. They were also largely used by the American Allied Countries. It entered service in the ‘60s but thanks to the improvements made in 1977 on the M-110 A1 version, it acquired improved operational efficiency. The M-110 A1 was armed with the new 203 mm long range M201 gun able to use a wide range of ammunitions. The project was characterized by an excellent mix in terms of firepower and mobility thanks to its reliable chassis (the same of the M-107). The M-110 A1 was deployed in the division artillery to perform tasks as general support, counter-battery fire and suppression of enemy positions. It was widely used during the conflict in Lebanon and during the first Gulf war. Detailed Plastic Kit
Model tanks
1:35 M32 Recovery Vehicle
510006547€29.99
Article number: 510006547 Product: 1:35 M32 Recovery Vehicle Model Dim.: 16,7 cm NEW GLUABLE TRACKS The Armored Recovery Vehicles (ARV), were introduced during the Second World War. They were built on the hulls of existing armored vehicles, removing the main armament and the turret and installing of specific equipment for the recovery or repair of armoured fighting vehicles damaged in battle. The American M-32 ARV was based on the chassis of the well-known Sherman A-4 medium tank and it was used by U.S. Army in the European Theater of Operations during the Second World War. It was characterized by the superstructure that permitted to lift and to trail the damaged tanks. Furthermore on M-32 a wide set of repairing tools and spare parts were loaded on board emphasizing its role of real "mobile armoured workshop" capable of operating on the front line. The M-32 was even able to perform complex operation as the replacing of the tank engine. The M-32, after the end of WWII, served in the U.S. Army during the Korean War and it was used by many Countries until the ‘90s. Detailed Plastic Kit of model M32 Recovery Vehicle in scale 1:35
Model tanks
1:35 M4A1 Early Version
540006701€84.99
Article number: 540006701 Product: 1:35 M4A1 Early Version It marks 80th anniversary of the Normandy Campaign in June this year. To commemorate this historic event, Dragon has planned to produce items that are related to the campaign. After several production runs of 1/35 scale figure sets, we are now introducing the Allied tanks. The first release will be a M4A1 Early Version. This new M4A1 not only boasts promising details, but also includes several new features that make it the perfect representation of the M4A1 tank that saw combat in Normandy. Main Features: - Magic Track - Aluminum gun barrel w/rifling inside - 3D printed applique armor plates - 3D printed headlight and horn guards - Copper cable Detailed plastic kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 M4A1 Sherman with U.S. Infantry
510006568€37.99
Article number: 510006568 Product: 1:35 M4A1 Sherman with U.S. Infantry Length of the model 167 mm CONTAINS 10 FIGURES - NEW GLUEABLE RUBBER TRUCKS - SUPER DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units and it formed the backbone of United Stated armoured forces during at those time. It has been produced in several variants and versions. The first version to be produced on wide scale was the Sherman M4A1 characterised by the rounded edges of the fully casted upper hull. Even the turret had a rounded appearance. The Sherman would entered combat in armoured corps of United States Army in 1942 during the first months of the war. It was armed with the 75 mm gun that was replaced in the latest A1 version with the high-speed 76 mm gun. Thanks to its Continental R975 gasoline engine the tank was able to obtain good performances on all type of terrains. However the most important strength of the tank was its project. The Sherman was reliable, cheap and easy to produce in great numbers. Detailed Plastic Kit
Model tanks
1:35 M4A3E8 Sherman "Fury"
510006529€41.99
The model "M4A3E8 Sherman Fury" in scale 1/35 has a length of about 168 mm. Fully upgraded moulds The box contains 2 track versions made by a new raw material which can be glued and painted. The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units ant it formed the backbone of United Stated armoured forces during at those time. it has been produced in several variants and versions The production of the M4A3E8 versions started at the end of 1944. The M4A3E8, adopting the nickname Easy Eight, took several technical improvements enhancing the Sherman operational effectiveness. The 76mm M1 high velocity gun had been flanked by a new horizontal volute spring suspension (HVSS) system able to ensure a better driving condition and to guarantee a higher speed. The "Easy Eight" participated to the final stages of World War II and took active part in the Korean War.
Model tanks
1:35 M4A4 w/60lb Rocket
540006405€74.99
Article number: 540006405 Product: 1:35 M4A4 w/60lb Rocket Dragon has released several 1/35 scale Sherman items. The newest addition to this series is the M4A4, which is equipped with twin launchers for 60lb rockets. This variant of the Sherman was field-modified and achieved success against enemy's targets. It also provided a significant morale boost to British troops. This new 1/35 kit of the special Sherman M4A4 not only accurately reproduces the rockets and their brackets but also includes 3D printing parts and a metal gun barrel for maximum detail. Furthermore, a full set of four infantry figures is offered as a free bonus. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 M6 Dodge Anti-Tank
510106555€20.99
Article number: 510106555 Product: 1:35 M6 Dodge Anti-Tank Model Dim.: 12,9 cm COLOR INSTRUCTION SHEET The Gun Motor Carriage M6 was developed on the famous 4x4 Dodge WC52 frame adopting, on the rear deck, a 37 mm. light anti-tank gun. Thanks to its Dodge T-214 6 cylinders engine the M6 was able to reach, on road, the speed of 90 Km/h. The United States Army used GMC M6 from the late 1942 up to the end of World War II on all the operating theaters as the Mediterranean, the European front and the Pacific. The GMC M6 was set up and developed to be anti-tank vehicle but, since the first clashes in Tunisia, its light gun was often ineffective against the most recent German tanks protections. Its main role was partially changed and the M6 started to be used as infantry support vehicles. Detailed Plastic Kit of model M6 Dodge Anti-Tank in scale 1:35
Model tanks
1:35 Mod. US M978 Fuel Service Truck
510006554€48.99
Article number: 510006554 Product: 1:35 Mod. US M978 Fuel Service Truck Model Dim.: 29,7 cm UPGRADED MOULDS - COLOR INSTRUCTIONS SHEET - NEW RIMS AND RUBBER TYRES The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. The outfitted versions, as the M978 Tanker, has been designed to perform, in a very precise and effective way, the different military logistic needs. Thanks to the loading capacity of over 9,500 liters, the tank installed on the vehicle is able to transport a significant quantity of fuel. The M978 has been effectively used by the U.S. Army in various severe operational areas such as Iraq and Afghanistan. Detailed Plastic Kit of model Mod. US M978 Fuel Service Truck in scale 1:35
Model tanks
1:35 Panzerwerfer 42 Maultier Halftrack
510006546€32.99
Article number: 510006546 Product: 1/35 Panzerwerfer 42 Maultier Halftrack Model Dim.: 17,1 cm Decals for 3 versions 2 TRACKS TIPES: GLUABLE RUBBER TRUCKS and HARD PLASTIC LINK and LENGTH TRACKS - COLOR INSTRUCTION SHEET The use of multiple rocket launchers by the German Armed Forces during World War II was quite extensive due to low cost and high efficiency of these arms systems. The main inconvenience of these vehicles was scarce mobility which made them vulnerable to enemy counter attacks. Thus, this mobile version of a 150 mm rocket-launcher type 42 was mounted on a half-truck Sd.Kfz. 4 Maultier, which guaranteed high mobility in off-road conditions. The vehicle was equipped with armour to protect its crew. Detailed Plastic Kit of model Panzerwerfer 42 Maultier Halftrack in scale 1:72
Model tanks
1:35 Partisans
510006556€12.49
Article number: 510006556 Product: 1:35 Partisans From ESCI Original Moulds During the German occupation of European countries in WW2 a key role was played by local ‘partisan’ groups. The partisans often had different ideals and political motivations but were united by the same goal to assist with the effort to secure victory against the German occupying forces. The type of operations conducted by partisan groups were wide-ranging, including both intelligence gathering and support activities to Allied forces, particularly in relation to acts of sabotage against the enemy's logistics and communications infrastructures. Detailed Plastic Kit
Model tanks
1:35 Pz.Beob.Wg,IV Ausf.J (2 in 1)
540006852€95.99
Article number: 540006852 Product: 1:35 Pz.Beob.Wg,IV Ausf.J (2 in 1) Dragon's 1/35 Panzer IV tank series has the largest variety of models in the market and is widely recognized for its superior quality. It is highly regarded by military model enthusiasts. Among them, one model that stands out in terms of appearance is the Ausf.J Last Production, characterized by its mesh side skirts that gives it a unique look. Based on it, we have introduced the Premium Edition to further enhance the model. The Premium Edition includes not only the existing metal mesh side shirts and extensive photo-etched parts but also features a metal gun barrel, 3D-printed muzzle brake, cooper towing cable, upgraded road wheels, and, of course, the well-knwon Magic Track. This new version is a must-have collectible for military model enthusiasts.
Model tanks
1:35 Quad Gun Trailer M55
540006421€29.99
Article number: 540006421 Product: 1:35 Quad Gun Trailer M55 The M55 Quad Gun Trailer is a rare anti-aircraft gun from the Allied forces in our product line. With meticulous engineering and design, it has been faithfully reproduced with accurate details. It is another highly anticipated item, considering its last release was a decade ago. Now, it presents a great opportunity for modelers to acquire it and enhance their collections. Detailed Plastic Kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 Sd. Anhänger 51
510006450€12.49
Article number: 510006450 Product: 1:35 Sd. Anhänger 51 Model Dim.: 7,6 cm CONTAINS 2 MODELS The Sd Anhänger 51 trailer could easily be used by a large number of Wehrmacht vehicles. The trailers have been developed to be used as ammo carriers and they were typically associated to anti-aircraft half-tracks armed with 20 mm Flak guns. During the Military campaigns the trailers were often fully loaded with any kind of materials. The lower "U" frame was extremely robust and suitable to be used on road and off road. Detailed Plastic Kit of model Sd. Anhänger 51 in scale 1:35
Model tanks
1:35 Sd.Kfz. 171 Panther Ausf. A
510000270€36.99
Article number: 510000270 Product: 1:35 Sd.Kfz. 171 Panther Ausf. A WA The Panzerkampfwagen V "Panther" is widely recognized as one of the best tanks that was produced during World War 11. It was deployed as a direct response to the Soviet T-34 and KV-1 tanks on the Eastern Front, which were superior to both the Panzer III and Panzer IV in terms of performance and armaments. Powered by a 700 horsepower V-12 Maybach engine, it was armed with the 75 mm KwK 42 high speed gun which was a very effective anti-tank weapon. The Panther was designed with optimal armor protection, including inclined front armor. Its overall mobility, speed and armaments made the Panther one of the leading tanks of the period, and ensured its deployment on all of the main operational fronts, from the East through Italy and France.
Model tanks
1:35 Sd.Kfz. 234/3 Heavy Recon. Veh.
510006756€35.99
Article number: 510006756 Product: 1:35 Sd.Kfz. 234/3 Sw. Panzerspähwagen The armored cars of the Schwerer Panzerspähwagen Sd.Kfz. 234 series were produced by the German war industry in the final phase of the Second World War. They were characterized by a high level of construction quality that combined mobility, operational flexibility, and offensive capability. The design represented an excellent blend of speed on all types of terrain, protection, and firepower, synthesizing the operational experience that the Wehrmacht had gathered in the early years of the Second World War. They could achieve a maximum road speed of 85 km/h. Among the various versions produced, the Sd.Kfz. 234/3 was armed with the short-barreled 75mm KwK37 cannon mounted in a fixed position in an open-topped fighting compartment, which could be effectively used to support infantry against lightly protected targets as well as against light armored vehicles. Detailed plastic kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 Sd.Kfz. 305/22 Funkwagen
510006575€29.99
Article number: 510006575 Product: 1:35 Sd.Kfz. 305/22 Funkwagen Model Dim.: 17,1 cm COLOR INSTRUCTION SHEET - RUBBER TYRES The Opel Blitz was the main truck used by German forces during the Second World War. It was deployed extensively on all fronts in huge numbers, and was consequently considered to be the "working mule" of the Wehrmacht. Thanks to the sturdy frame, the robust system of rigid axles with leaf springs and the twin-wheels on the back, the Opel Blitz was able to carry a payload of over 3 tons. The 3,600 cc. engine was easy to maintain and provided 75 hp. The most popular version was the 4x2 with rear wheel drive. However, there was also a 4x4 version that operated both in Russia and the North African desert. Thanks to its flexibility and its wide rear cargo area, the Opel Blitz was also deployed in additional roles including as a mobile command post equipped with radio communications for battlefield management of ground troops. Detailed plastic kit in scale 1:35
Model tanks
1:35 Sd.Kfz.250 NEU mit 5cm PaK 38
540006884€78.99
Article number: 540006884 Product: 1:35 Sd.Kfz.250 NEU mit 5cm PaK 38 There were a great many variants amongst Sd.Kfz.250 halftrack family. As well as the catalogued official factory-produced variants, sometimes field modifications were also made to the halftrack, and one such type is featured in Dragon’s latest item: Sd.Kfz.250 NEU mit 5cm PaK 38. This field conversion had the rear compartment stretched to accommodate the 5cm cannon, and this change is accurately reflected. The interior has received a makeover as well, including a new layout for ammunition stowage cases, for example. Furthermore, Magic Tracks are included in the box for the sake of modelers’ convenience and accuracy. A 3D-printing muzzle brake is offered as bonus. Metal width indicator poles are included free as well. This variant of the Sd.Kfz.250 has a completely new appearance and, therefore, for those modelers seeking a halftrack with enhanced impact, this kit is the perfect choice. Detailed Plastic Kit
Model tanks
1:35 Sd.Kfz.250/1 le SPW Alte
540006557€75.99
Article number: 540006557 Product: 1:35 Sd.Kfz.250/1 le SPW Alte The initial version of the Sd.Kfz.250 Alte has now been upgraded to the Premium Edition. In comparison to the original one, the premium edition incorporates the latest parts from Dragon's Sd.Kfz.250 series. Additionlly, it features the use of Magic Track for convenient assembly and improved accuracy. The interior of the fighting compartment is equipped with GEN 2 weapons and equipment. Furthermore, metal width indicator poles are included. Given its extensive use during WWII, this enhaanced 1/35 Sd.Kfz.250/1 le SPW Alte is definitely a good choice for modelers to add it into their new diorama plans. Detailed plastic kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 Sd.Kfz.251/22Ausf.Dw/NightVis.Falke
540006994€84.99
Article number: 540006994 Product: 1/35 Sd.Kfz.251/22 Ausf.D w/Night Vision Falke This new Sd.Kfz.251/22 Ausf.D boasts an impressive level of detail in the open-topped fighting compartment, including the finely-detailed 7.5cm PaK 40 gun. In addition, it is equipped with Night Vision Falke, which helps the crew to easily aim at targets during nighttime combat. The kit includes Ez-Track, photo-etched parts, and metal width indicators. A free figure set of four gun crew is also provided, allowing the modeler to create a realistic diorama straight from the box. Detailed Plastic Kit
Model tanks
1:35 Sd.Kfz.251/9 Ausf.D w/7.5cm KwK 37
540006863€84.99
Article number: 540006863 Product: 1:35 Sd.Kfz.251/9 Ausf.D w/7.5cm KwK 37 The Sd.Kfz.251/9 Ausf.D was designed as a support vehicle for mobile armored units and was equipped with a 75mm KwK 37 L/24 howitzer. We are excited to announce the release of a new item for the special variation of the Sd.Kfz.251/9. The characteristic 75mm gun has been accurately rendered with a full breech, and the metal gun barrel has rifling inside. The fighting compartment also features fully detailed interiors. In addition, we have upgraded it with Ez-Track and brass width indicators, and a full set of gun crew is included for free. This is a must-buy for anyone interested in the 251 series. Detailed Plastic Kit
Model tanks
1:35 Sd.Kfz.252 MKW m.Sd.Ah.32/1Trail
540006718€78.99
Article number: 540006718 Product: 1:35 Sd.Kfz.252 MKW m.Sd.Ah.32/1Trail Stalingrad was the ultimate target of the German 6th Army. This Russian city, bearing the name of Hitler’s Communist nemesis, was the center of vicious house-to-house and hand-to-hand fighting from November 1942 to January 1943. Finally, the Germany 6th Army was forced to make the ultimate sacrifice, with 150,000 German soldiers killed, and widespread losses of equipment. The German were never able to recover from this loss and were eventually forced into a long retreat out of Eastern Europe. To mark the event's 80th anniversary, we has brought together a number of German AFVs that saw combat in this bloody battle 80 years ago. Detailed Plastic Kit
Model tanks
1:35 Sd.Kfz.253 le.Beob.Pz.Wg.(Smart Kit
540006482€76.55
Article number: 540006482 Product: 1:35 Sd.Kfz.253 le.Beob.Pz.Wg.(Smart Kit) The Dragon’s 1/35 Sd.Kfz.253 has been the only choice available in the market for years, and now the new Smart Kit version of the same vehicle (item 6482) incorporates a range of the most updated parts from the Dragon’s Sd.Kfz.250 series. The new version becomes more accurate and more detailed, surpassing the previous version a lot in every aspect. In addition to the improved parts, this new item also includes Magic Track, Metal Width Indicator Poles and Photo-Etched parts. The box also includes a bonus figure set, which not only adds value to the product but also makes it easier for modelers to envision their diorama. Detailed plastic kit Warning! Not suitable for children under 14 years.
Model tanks
1:35 Semovente L 40 da 47/32
510006477€30.99
Article number: 510006477 Product: 1:35 Semovente L 40 47/32 The Semovente L40 was developed and further improvised using the hull of the L6/40 light tank to equip the Italian Regio Esercito with a fast armored vehicle, which was capable of providing artillery support and could also be deployed as a tank destroyer. In the construction phase of the L40, the original L6/40 tank turret was removed and the 47/32 Mod.1935 anti-tank cannon, similar to the one used on the "M" series tanks, was installed in the open casemate. The Semovente was notable for its small size, the plate and rivet armor used being typical of Italian production of the period and by a crew of only two men. Despite its battlefield performance being clearly inadequate in the face of enemy armor, it continued to be used during the Second World War by Italian Forces in Libya, Tunisia and also in the homeland campaign. Following the Armistice some units were deployed on secondary military tasks with the Wehrmacht and Luftwaffe support troops.
Model tanks
1:35 Sherman M4A1
510000225€28.99
Article number: 510000225 Product: 1:35 Sherman M4A1 Model Dim.: 16,5 cm "V-DAY" Special Edition NEW DECAL VERSIONS: FRANCE & SOUTH AFRICA (in addition to the existing US version) In 1941, after the German attack on Russia, it became clear to the UNITED STATES that possibility of an American involvement in the war was becoming more and more inevitable. For this reason, President Roosevelt ordered substantial production increases of the medium tank M4. The tank was not a completely new model, since it derived from the previous model M3 "Grant". The Sherman had some major improvements on the superstructure and on the armament as well as on the welded or cast hull. The "General Sherman", under which name the new tank was soon to be known, was equipped with a 75 mm gun, which was, however, insufficient against the German Tanks. This necessitated a series of changes, including a completely new turret as well as a 76 mm gun, which would be more efficient than the previous one. The new prototype was given the designation M4 A1. In January 1944, the new type was introduced. Until the end of the war, about 3400 pieces were produced. Notwithstanding the improvements, there were still many defects, one of them being the lack of protection. Frequently the crew was forced to protect the tank sides and the front with sandbags. In some instances the most exposed track sections were covered and sometimes even cement or steel blocks were attached. Tanks to its numerical superiority, the tank was able to match the German tanks, using its great maneouverability and its excellent 76 mm gun. M4 A1 took part in the invasion of Normandy and in all European theatres. Detaillierter Plastikmodellbausatz des Modells Sherman M4A1 im Maßstab 1:35 VE-DAY SPECIAL EDITION NEW DECAL VERSIONS: FRANCE & SOUTH AFRICA (in addition to the existing US version)