CARSON Product Range

Dive into the world of Carson: Discover everything about RC models, accessories, electronics, and plastic model kits – from entry-level sets to pro-grade vehicles. Your model-building journey starts here at the Carson RC model shop!

More

Sort by:

Top sellers
  • Top sellers
  • New
  • Price ascending
  • Price descending
Filter

Filter
Price
Category
Brand
Brands & licenses
Scale
1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR

- 20 %

RC truggies & RC monster trucks

1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR

500404292
€99.99

€124.99

The 1:10 Mega Duster 3.0 brings pick-up truck styling, LED lighting and a fully assembled RTR setup into a 430 mm off-road RC car built for rough ground. With independent suspension, coilover shocks and a fully suspended layout, the chassis is set up to absorb uneven surfaces while the multi-coloured printed body keeps the truck's desert-racer look clear in motion. Its 2.4 GHz radio system uses digital proportional control, so steering and throttle inputs can be fed in with fine adjustment rather than simple on-off commands. The included Li-Ion drive battery is rated at 7.4 V and 1500 mAh, and the USB charger is part of the set, along with 4 AA transmitter batteries. At 310 mm wide and 200 mm high, the truck carries a broad monster-truck footprint, while the stated weight of 1364 g supports a planted feel over gravel and dirt. Splash-proof electronics expand the running window when the surface is dusty or damp, and the stated driving time reaches up to 25 minutes. The Mega Duster 3.0 suits open ground, compacted trails and loose stone where the 115 mm all-terrain tires can work for grip and control. Age 14+ is stated for this model, and the fully assembled format gets the focus quickly onto driving lines, throttle control and off-road handling rather than workshop time.  Warning! Not suitable for children under 14 years.

1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR
1:32 Deemon X, RC buggy, 100% RTR 2WD

RC cars

1:32 Deemon X, RC buggy, 100% RTR 2WD

500404322

€29.99

Compact scale and lively handling give the 1:32 Deemon X the feel of a true off-road RC buggy in a format built for quick runs at home or on small garden tracks. The 2WD layout, 2.4 GHz remote control system and selectable speed levels create a clear, responsive driving setup, while the elaborately printed body shell and switchable LED lighting keep the model visually sharp in motion. At 115 mm long, 86 mm wide and 53 mm high, the buggy fits neatly into tabletop courses, improvised obstacle lines and tighter turns where larger vehicles need more room. The 3.7 V 100 mAh LiPo drive battery supports up to 15 minutes of driving time, and recharging happens via the included USB charger. Included pylons and the jump ramp add concrete course elements for slalom sections, launch points and repeatable stunt practice rather than simple straight-line driving. The 69 g weight keeps the model nimble when changing direction, and the rubber tires give the chassis the grip needed for uneven surfaces. Short sessions on indoor floors, hallway tracks or paved garden paths suit the Deemon X especially well, whether the focus is clean cornering, quick acceleration bursts or ramp jumps. With 2 speed settings and a complete RTR package, the buggy moves easily between first RC laps and fast, compact course driving

1:32 Deemon X, RC buggy, 100% RTR 2WD
1:12 MB Unimog U300 THW, RC truck, 100% RTR

- 53 %

Models & trailers

1:12 MB Unimog U300 THW, RC truck, 100% RTR

500907722
€94.99

€200.00

The Unimog line became known for compact dimensions, portal-axle capability and utility work across rough terrain, and that character carries into this 1:12 MB Unimog U300 THW RC truck. In blue THW livery, the model combines a 450 mm body length with a powerful electric motor, front LED lighting and a 2.4 GHz control system for controlled driving on paths, gravel and other uneven ground. Its 220 mm width and 260 mm height give the truck a tall, purposeful stance that suits the U300 shape, while the 2052 g weight adds substance in motion. The remote control handles steering and throttle proportionally, so small stick inputs translate into finer changes than simple on or off control. A separate horn function can be triggered from the transmitter, and motor sound control adds another layer to the driving scene. The 7.4 V 850 mAh Li-Ion drive battery is included, and the RTR setup also includes the 2.4 GHz transmitter, a USB charger and transmitter batteries. That combination suits first runs in the hobby as well as relaxed utility-style driving sessions with a scale vehicle theme. On compacted dirt, paving or loose gravel, the THW truck can be guided through tighter turns, short climbs and stop-start route changes while the illuminated front end keeps the model visually defined.

1:12 MB Unimog U300 THW, RC truck, 100% RTR
1:20 MB Arocs Goldhofer, RC truck, 100% RTR

RC lorries & RC trucks

1:20 MB Arocs Goldhofer, RC truck, 100% RTR

500907307

€109.99

Heavy-haul transport is a defining part of construction logistics, and the 1:20 MB Arocs Goldhofer brings that role into RC form with a 1000 mm long truck and low loader combination. The fully assembled RTR set combines remote-controlled driving with functional trailer handling, creating a model that looks at home moving machinery between workshop shelf and jobsite scene. At 155 mm wide and 185 mm high, the model carries the long, low stance of a transporter, while the 1350 g weight gives the combination a substantial feel in hand. The installed reversing light works automatically together with the tractor unit, adding a realistic response during manoeuvres without needing a separate command. Included in the set are the ready-to-run model, a 2.4 GHz RC system, 2 x 4.8 V NiMH batteries, a USB charger and 2 x AA transmitter batteries. The 30 minute driving time supports extended loading runs, repositioning moves and repeated coupling sequences. Minimum age: 8 years. The low-bed layout suits transport scenes with construction machinery or other scale loads, and the remote-controlled ramp and support add movement beyond simple forward driving. On a floor layout, workshop setup or construction-themed display, the MB Arocs Goldhofer turns loading, uncoupling and trailer positioning into the central part of the action.

1:20 MB Arocs Goldhofer, RC truck, 100% RTR
1:10 Dustor, RC car, 2.4 GHz 100% RTR

RC cars

1:10 Dustor, RC car, 2.4 GHz 100% RTR

500404352

€69.99

The 1:10 Dustor brings full-size RC presence to first runs and casual off-road sessions, with a 540 mm length, 300 mm width and 240 mm height that give the model a broad, planted stance on mixed surfaces. A brushed motor drives the 2WD rear-wheel-drive layout to speeds of up to 20 km/h, while the 2.4 GHz radio system reaches up to 75 m for clear control across open ground. Its fully assembled format keeps the focus on driving, and the included 7.4 V 500 mAh Li-Ion battery works with the USB charger for straightforward turnaround between sessions. At 985 g, the chassis stays light enough for responsive direction changes while still carrying the visual weight expected from a 1:10 off-road model. Front and rear impact protection support everyday running where gravel edges, kerbs and clipped markers are part of the route. The included transmitter is powered by 2 x LR06 AA batteries, so the full set is prepared for use without extra radio equipment. On asphalt, compacted paths or light terrain, the combination of suspension travel, rear-drive handling and off-road tires creates a controlled, approachable driving character. With up to 30 minutes of running time per charge, the Dustor suits park runs, open-yard driving and repeated practice laps where longer sessions matter.

1:10 Dustor, RC car, 2.4 GHz 100% RTR
1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer

RC tractors

1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer

500907705

€99.99

The DEUTZ-FAHR 8280 TTV brings the look of a modern farm tractor into 1:16 scale with a matching trailer, 2.4 GHz radio control and working sound functions. Engine sound, horn and LED front lighting create a more lifelike driving scene, whether the tractor is rolling across loose soil, garden paths or a carefully arranged display setup. At 750 mm long, 180 mm wide and 234 mm high, the model has a substantial footprint that suits towing and transport play. The rigid axle supports off-road running, while the steering is tuned for precise control and a small turning radius, helping the tractor change direction cleanly and guide the trailer through tighter spaces. The officially licensed DEUTZ-FAHR styling carries the 8280 TTV identity into the bodywork, giving the model a recognisable agricultural character. The accessible battery compartment under the hood allows quick battery changes between runs. Included are the ready-to-run tractor with trailer, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR03 AAA transmitter batteries. With a weight of 1731 g and a driving time of 90 minutes, the set is equipped for extended driving sessions focused on towing, positioning and farm-style transport action.

1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer
1:8 Drakuro BL 3S, RC car, 4WD RTR

RC buggys

1:8 Drakuro BL 3S, RC car, 4WD RTR

500409097

€299.99

The 1:8 Drakuro BL 3S RTR brings brushless power, long-travel suspension and a wide 370 mm stance into one large-scale RC car built for fast off-road running. At 500 mm long, 330 mm high and 3402 g in weight, the chassis carries real presence on dirt tracks, gravel stretches and open ground, with a top speed of up to 65 km/h. A longitudinal aluminum reinforcement brace adds rigidity through the centre of the chassis, and reinforced steel drive shafts at the front and rear transfer power under load. The waterproof 30 kg steering servo uses metal gears for direct steering input, while splash-proof electronics and housing support running in changing conditions. Height-adjustable body mounts make it easier to set the shell position cleanly over the chassis, and LED lighting at the front, rear and roof keeps the model clearly defined when the light drops. The XT90 high-current connector system is designed for low-loss power transmission within the drive setup. The ready-to-run package includes a 2.4 GHz remote control and instructions, so the focus stays on driving rather than sourcing the core control gear. With 14 Years marked in the data, the Drakuro suits high-speed bashing sessions, repeated acceleration runs and broad off-road lines where suspension travel, steering force and chassis size all come into play.  Warning! Not suitable for children under 14 years.

1:8 Drakuro BL 3S, RC car, 4WD RTR
1:87 M-B 200/8, RC car, 100% RTR trailer

RC models in 1:87 scale

1:87 M-B 200/8, RC car, 100% RTR trailer

500504169

€114.99

The Mercedes-Benz /8 series shaped everyday road traffic in the late 1960s and 1970s, and this 1:87 M-B 200/8 captures that classic saloon presence in a compact RC format. The green body and matching trailer combine a recognisable road-car silhouette with radio-controlled movement, creating a small-scale setup that carries both collector appeal and active driving use. Its 1:87 scale makes the model easy to place on a desk, shelf, or layout, while the trailer adds a second element that changes the overall scene and gives the combination a more complete towing look. The 100% RTR specification means the driving package is prepared for immediate use, and 5 included batteries cover the initial power requirement stated in the data. With a minimum age marking of 14 years, the model sits in a hobby-focused range rather than a preschool toy segment. The compact format also suits short driving sessions where a larger RC vehicle would need more floor space. Whether used for careful indoor manoeuvres, as a small addition to a model collection, or as a road-car counterpart within a miniature vehicle lineup, the M-B 200/8 with trailer brings motion into a classic passenger-car theme. The combination of saloon and trailer gives the setup a distinct identity both at rest and in operation.  Warning! Not suitable for children under 14 years.

1:87 M-B 200/8, RC car, 100% RTR trailer
1:87 MB 1620 Tarp Truck, RC truck, 100% RTR

RC models in 1:87 scale

1:87 MB 1620 Tarp Truck, RC truck, 100% RTR

500504157

€139.99

The 1:87 MB 1620 Tarp Truck with trailer brings moving road traffic into H0 railway scenes with compact dimensions of 187 x 28 x 38 mm and fully assembled 100% RTR equipment. Official Mercedes-Benz Trucks licensing, fine printwork and the blue finish give this RC truck a recognisable presence beside stations, freight depots and urban track sections. Its 2.4 GHz radio system supports interference-free control and allows several models to run at the same time, which suits busy diorama setups with more than one active vehicle. The very small turning radius helps the truck work through narrow streets, loading areas and switching zones where larger RC formats would look out of scale. The trailer extends the road-train silhouette and the removable tarp changes the look of the load area for different scene concepts. Included in the set are the ready-to-drive model, 2.4 GHz remote control system, Li-Ion drive battery 3.7 V / 75 mAh, 4 transmitter batteries LR03 / AAA, and instructions. On a layout, the truck can roll alongside trains, serve as a delivery vehicle near a goods shed or move through a city section with controlled speed changes and steering inputs. Collectors can also place it as a static display piece, with the integrated driver figure and licensed cab details carrying the scale effect even when the model is parked.

1:87 MB 1620 Tarp Truck, RC truck, 100% RTR
1:60 Nano Racer Aston Martin V12 Vantage RC car

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage RC car

500404338

€17.99

The Aston Martin V12 Vantage brings a well-known British sports car shape into a compact 1:60 Nano Racer format with radio control and a red body that stands out clearly on small driving layouts. Its officially licensed appearance follows the full-size model closely, while the 79 mm length, 33 mm width and 22 mm height keep the car suited to short straights, table-edge turns and quick direction changes in limited space. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The controller works on 2.4 GHz and reaches up to 15 m, giving the car enough room for indoor laps and compact obstacle courses. The same control system allows up to 50 vehicles to run simultaneously, which opens the door to group sessions without frequency clashes. With a weight of 25 g, the small chassis stays easy to handle between runs, and the battery delivers up to 10 minutes of driving time per charge. On a living room floor, a desk track or a small race setup, the Nano Racer format turns narrow spaces into usable circuits. Short driving sessions, quick charging through the controller and the compact footprint make this RC car a neat choice for spontaneous races, collecting and casual practice runs.

1:60 Nano Racer Aston Martin V12 Vantage RC car
1:60 Nano Racer Fo.Must.ShelbyGT500, RC car

Mini RC cars

1:60 Nano Racer Fo.Must.ShelbyGT500, RC car

500404334

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle car presence, and this 1:60 Nano Racer translates that character into a compact RC format. At 79 mm long, 33 mm wide and 22 mm high, the miniature car stays small enough for quick driving sessions on tables, smooth floors or improvised indoor courses while still carrying the licensed Ford look. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The 2.4 GHz radio system gives the car responsive control and allows up to 50 vehicles to run simultaneously, which suits group races without frequency clashes. A 15 m control range leaves room for short sprints, turns and head-to-head runs, while the 25 g weight keeps the handling light and agile. The remote control also serves as the charging point, so the battery can be charged directly through the controller. With up to 10 minutes driving time, the Nano Racer fits quick race breaks, compact home circuits and repeated short sessions where several cars share the same space. The small footprint and simple control layout also make it easy to set up spontaneous races whenever a smooth surface is available.

1:60 Nano Racer Fo.Must.ShelbyGT500, RC car
1:87 M-B Unimog U406, RC fire engine, RTR

RC models in 1:87 scale

1:87 M-B Unimog U406, RC fire engine, RTR

500504178

€109.99

The Mercedes-Benz Unimog U406 has long been known for compact utility and all-terrain presence, and this 1:87 RC fire engine translates that character into a format built for close-quarters driving. Fine printing, high-quality paintwork and front and rear LED lighting give the body a convincing emergency-service appearance, while the very small turning circle suits narrow routes between scenery, tools or display pieces. The chassis uses 2WD rear-wheel drive and a brushed motor for controlled running, with fully proportional steering and acceleration allowing measured inputs instead of simple on-off commands. That control layout makes a visible difference on a desk, in a diorama or anywhere space is limited, because the model can be guided through tighter lines with cleaner corrections. The 2.4 GHz system supports stable operation, and the permanently installed 3.7 V 75 mAh Li-ion drive battery keeps the compact body free from bulky battery changes. Charging takes place via the transmitter and takes around 30 minutes. As a 100% RTR version, the set arrives with the remote control, the drive battery and the batteries required for the transmitter. Up to 60 minutes of driving time supports longer indoor sessions, whether the model is weaving through a small layout, tracing service routes across a tabletop or adding movement to a scale scene.

1:87 M-B Unimog U406, RC fire engine, RTR
Eagle 280 Crash Stop, RC helicopter, 2.4G RTF

- 31 %

RC helicopters

Eagle 280 Crash Stop, RC helicopter, 2.4G RTF

500507169
€37.99

€54.99

The Eagle 280 Crash Stop brings compact RC helicopter flying together with a front crash-stop sensor that reacts to obstacles by stopping and backing the model away. At 200 mm long, 280 mm wide and 125 mm high, this 56 g coaxial helicopter suits controlled flights in tighter spaces as well as calm outdoor use. The 2.4 GHz control system gives the model its dedicated radio link, while the emergency stop button on the transmitter adds a direct way to cut the action when needed. A 3.7 V 250 mAh LiPo flight battery powers flights of up to 7 minutes, and the model reaches speeds of up to 25 km/h. The aluminium chassis gives the structure a firm core, and the coaxial rotor arrangement supports balanced lift for measured handling. Spare rotor blades are included, so the set is equipped for continued running after routine contact or wear. Indoor flights near walls, hallways or furniture benefit from the forward obstacle response, while open areas allow short hovering runs, lift-offs and landings with the same compact airframe. The ready-to-fly package includes the helicopter, remote control system, USB charger and transmitter batteries, so the set is prepared for flight after the first charging process.

Eagle 280 Crash Stop, RC helicopter, 2.4G RTF
RC Fire Boat 2.4G, RC boat, 100% RTR

- 21 %

RC speed boats

RC Fire Boat 2.4G, RC boat, 100% RTR

500108051
€94.99

€119.99

The RC Fire Boat 2.4G 100% RTR brings firefighting action onto the water with a remotely operated water cannon, LED position lights and a sporty rescue-boat look. At 560 mm long, 147 mm wide and 215 mm high, the hull has a strong on-water presence, while the 2.4 GHz radio system keeps control stable across distances up to 100 m. The fully assembled boat is supplied as a ready-to-run set with a 7.2 V 1000 mAh NiMH drive battery, USB charger, 2.4 GHz remote control and 2 x AA transmitter batteries. Full driving functions cover forwards, backwards, left and right, so manoeuvres can be varied between straight sprints, tight turns and controlled repositioning for water-cannon play. A driving time of 45 minutes supports longer sessions before recharging, and the boat weight of 717 g keeps the format easy to handle between shore and water. Whether used on a pond, at the lakeside or on calm stretches of water, the fireboat combines radio-controlled driving with an extra action feature that changes how each run unfolds. Age 8 years+ marks the recommended age, and the included screwdriver supports the setup of the supplied components before the next launch.

RC Fire Boat 2.4G, RC boat, 100% RTR
1:60 Nano Racer Aston Martin V12 Vantage, RC car

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage, RC car

500404339

€17.99

The Aston Martin V12 Vantage brings British sports car character into a 1:60 Nano Racer format, combining licensed body styling with compact RC handling. At 79 mm long, 33 mm wide and 22 mm high, the black coupe keeps a low, planted look that suits short sprints across tables, smooth floors and small driving spaces. Its 2.4 GHz radio system gives the model a dependable link to the controller across 15 m, and the layout also allows up to 50 vehicles to run at the same time. That makes the small scale especially lively in group sessions, where several cars can share the same area without constant frequency conflicts. The ready-to-run setup keeps the focus on driving, while the included 1.2 V 80 mAh NiMH drive battery matches the compact chassis and the 25 g weight for quick, light movement. Charging runs directly through the remote control unit, so the car and controller work as one neat driving system. With a maximum driving time of 10 minutes, the Nano Racer suits short races, repeat laps and quick head-to-head runs. Age 4+ is stated in the product data. The included screwdriver supports battery access as part of the set contents, and the compact format makes the model easy to store between sessions.

1:60 Nano Racer Aston Martin V12 Vantage, RC car
RC Yacht Hurikan, RC boat, 2.4 GHz RTR

RC speed boats

RC Yacht Hurikan, RC boat, 2.4 GHz RTR

500108059

€39.99

The Hurikan brings yacht styling and fast RC handling together in a compact 350 x 95 x 105 mm format built for lively water runs. Sand tones, white surfaces and dark window graphics give the hull a sharp, modern look, while the 2.4 GHz radio system keeps steering input responsive during laps across the lake. At 270 g, the model stays light in the hand for carrying to the shoreline, yet its twin-prop drive gives the boat the thrust needed for brisk acceleration on the water. Full driving functions cover forward, backward, left and right control, making tight turns and quick corrections easy to manage. The set includes a ready-to-run model, a 2.4 GHz remote control system, a USB charger, 2 x LR06 AA transmitter batteries and 2 spare propellers. The included 3.7 V 1200 mAh Li-Ion battery powers sessions of up to 40 minutes, and the drive engages only in water through the integrated shut-off circuit. That combination suits calm-lake outings, pond sessions and repeated practice runs where clean response matters as much as speed. Age 8+ marks the recommended age, and the complete RTR setup keeps the focus on steering lines, throttle control and fast passes across open water.

RC Yacht Hurikan, RC boat, 2.4 GHz RTR
1:24 Lamborghini Sian, RC car, 2.4GHz RTR

RC cars

1:24 Lamborghini Sian, RC car, 2.4GHz RTR

500404332

€24.99

The Lamborghini Sian brings super sports car styling into a compact 1:24 RC format, pairing a low, sharply shaped body with radio-controlled handling and a full ready-to-run setup. With a length of 195 mm, a width of 80 mm and a height of 49 mm, the model carries its proportions in a size that suits quick laps across smooth indoor surfaces. The 2.4 GHz remote control system supports stable command input during solo driving, while the 3.7 V Li-Ion drive battery with 500 mAh powers up to 60 minutes of ride time. At 172 g, the car stays light in hand and easy to place on the floor between runs. The included USB charger keeps the charging routine simple, and the set also contains 2 LR03 AAA transmitter batteries. A rear axle differential adds a mechanical detail that supports smoother cornering behaviour, while steering fine adjustment helps tune the driving line to the available space. LED lights at the front and rear keep the bodywork visible when the room gets darker and add extra presence during evening driving sessions. On a hallway course, around furniture legs or across a cleared living-room track, the compact dimensions, quick responses and detailed Lamborghini look create a focused RC session with a clear sports car character.

1:24 Lamborghini Sian, RC car, 2.4GHz RTR
1:60 Nano Racer Fo.Must.Shelby GT500, RC car

Mini RC cars

1:60 Nano Racer Fo.Must.Shelby GT500, RC car

500404335

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle-car presence, and this 1:60 Nano Racer translates that character into a compact RC format. With its licensed Ford design, red bodywork and stripe detailing, the small car brings a recognisable road-car silhouette to quick indoor driving sessions. The 2.4 GHz control system sends steering and throttle inputs over a range of 15 m, and it allows up to 50 vehicles to run simultaneously on the same frequency environment. Charging takes place through the remote control unit, which includes the charging connection for the 1.2 V 80 mAh NiMH drive battery. A full charge delivers up to 10 minutes of driving time. The ready-to-run format means the model, remote control with charging connection, NiMH drive battery, screwdriver and instructions are included. With dimensions of 79 x 33 x 22 mm and a weight of 25 g, the Nano Racer fits naturally into compact race setups where short straights, quick direction changes and close duels matter more than sheer size. The small scale also makes it easy to line up several cars for simultaneous runs, turning a table, hallway or smooth floor into a miniature racing scene with very little space required.

1:60 Nano Racer Fo.Must.Shelby GT500, RC car
1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz

RC models in 1:87 scale

1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz

500504175

€129.99

The Mercedes-Benz O 302 shaped coach travel across Europe for years, and this 1:87 RC bus brings that familiar silhouette into moving H0 scenes with licensed bodywork, raspberry red paintwork and front and rear LED lighting. At 112 mm long, 36 mm wide and 51 g in weight, the model sits naturally among buildings, platforms and road sections without overpowering the layout. Its 2WD rear-wheel drive works with a 2.4 GHz 3-channel radio system for controlled movement at up to 50 m, while the compact format helps the bus thread through tighter streets and station areas. The integrated 3.7 V Li-Ion battery with 75 mAh is built into the model, keeping the setup clean and the proportions true to scale. As a 100% RTR version, the set includes the remote control, the lithium drive battery, 4x AAA batteries, instructions and a storage case. The licensed Mercedes-Benz O 302 DB format gives the bus a recognisable road-going character that suits realistic transport scenes. On a model railway layout, the bus can roll between station forecourts, depot roads and town routes, adding controlled movement where static vehicles would otherwise remain fixed. The compact H0 scale format also suits shelf presentation between driving sessions, with the lighting and paintwork carrying the look of a classic DB bus into close-up display settings.

1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz
Easy Skydreamer, RC aircraft, 2.4 GHz RTF

RC aircraft

Easy Skydreamer, RC aircraft, 2.4 GHz RTF

500505035

€29.99

The Easy Skydreamer brings a compact flying-wing layout, twin propellers and 2.4 GHz control into a light RC aircraft that is built for straightforward handling in open-air flying sessions. At 240 mm long, 240 mm wide and just 20 g in weight, the airframe combines a small footprint with a notably light feel that suits quick launches and controlled passes. Its 6-axis gyroscope works continuously in the background to steady the model in flight, giving steering inputs a calmer, more predictable response than an unstabilised layout. The Flexipor airframe adds another concrete advantage: the material keeps the structure light while coping well with the bumps that can come with early practice flights. Twin rear-mounted propellers support the aircraft's powered flight concept, and the included 3.7 V 150 mAh LiPo flight battery supplies up to 15 minutes of runtime per charge. The set is configured as 100% Ready to Run, so the core flying hardware is already matched for use. Included in the set are the flight-ready model, the remote control, the LiPo flight battery, a USB charger, 2 x LR06 transmitter batteries and 2 spare propellers. With its stabilised control concept and low 20 g weight, the Easy Skydreamer suits park flights, first RC take-offs and short practice sessions focused on smooth turns, level passes and repeatable landings.

Easy Skydreamer, RC aircraft, 2.4 GHz RTF
Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF

RC helicopters

Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF

500507132

€29.99

The Easy Tyrann 200 Boost IR brings compact indoor helicopter flying into a 100% RTF format with a 240 mm body, 200 mm rotor diameter and a 3-channel infrared control system. Its gyro-supported flight stabiliser helps keep the model composed in the air, while the switchable boost function adds an extra burst of power when the pace needs to change. A 3.7 V LiPo flight battery with 250 mAh capacity powers flight times of up to 9 minutes, and charging runs through the included USB charger. The transmitter also controls the color changing LED, so the light effect can be switched during flight rather than staying fixed. With a top speed of 15 km/h and a flight weight of 31 g, the helicopter stays light enough for controlled indoor use while still delivering lively movement. The ready-to-fly set includes the model, IR remote control system, LiPo flight battery, USB charger, 3x LR06/AAA transmitter batteries and spare rotor blades. Short hovering runs in a living room, careful turns along a hallway or repeated take-offs and landings on a smooth floor all suit the compact format. Age 8 Years+

Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF
Sea Ray 2.4 GHz, RC boat, 100% RTR

RC speed boats

Sea Ray 2.4 GHz, RC boat, 100% RTR

500108063

€54.99

The Sea Ray 2.4 GHz brings twin 380 brushed motors, a streamlined hull and RTR convenience together in a compact RC boat built for fast action on the water. At 395 mm long, 190 mm wide and 100 mm high, it cuts a neat profile across ponds and calm lakes, with LED lighting adding a clear visual accent as the hull moves through changing light. The fully assembled format keeps the focus on driving rather than setup, and the included 7.4 V 600 mAh Li-Ion battery supports up to 20 minutes of running time per charge. A charging time of 3 hours keeps the routine straightforward between sessions. The 2.4 GHz radio system is designed for 1 player control, while the water-protected receiver and battery box help keep key electronics covered from spray. A built-in shut-off means the motors only run in water, matching the boat's intended use with a clear functional safeguard. Its lightweight 349 g build makes carrying the model from bag to bank easy, and the compact shape sits comfortably in hand at launch and recovery. With 2 AA transmitter batteries included, the set is ready for immediate use in suitable water conditions, whether the plan is short speed runs, repeated passes along the shoreline or relaxed practice with steering and throttle control.

Sea Ray 2.4 GHz, RC boat, 100% RTR
1:12 MB Unimog U300, RC truck, 100% RTR

- 50 %

Models & trailers

1:12 MB Unimog U300, RC truck, 100% RTR

500907721
€99.99

€199.99

The MB Unimog U300 has long been known as a compact utility truck with strong off-road credentials, and this 1:12 RC version carries that working character into a fire brigade layout with covered rear bed, roof beacons and front LED lighting. At 450 mm long, 220 mm wide and 260 mm high, the model brings a substantial road presence while staying manageable for regular driving sessions. The fully assembled chassis is ready to run with a powerful electric motor, digital proportional control and a 2.4 GHz remote control unit. Steering and throttle inputs can be adjusted progressively, which gives the truck a more controlled feel than simple on or off commands when lining up turns or easing over rougher ground. The included 7.4 V 850 mAh Li-Ion drive battery supplies up to 60 minutes of driving time, and a USB charger is part of the set. Horn and motor sound can be triggered from the transmitter, adding another layer of interaction during runs. With a vehicle weight of 2052 g, the model has enough substance to suit its utility-truck character. Fire brigade markings, the covered cargo area and the upright Unimog proportions make this RC truck fit naturally into rescue-themed driving scenes, yard layouts or obstacle courses with gravel, paving and mixed surfaces. The included transmitter batteries complete the 100% RTR setup, so the model can head straight into its first run after charging.

1:12 MB Unimog U300, RC truck, 100% RTR
1:50 Nano City Dump Truck, RC truck, 2.4 GHz

Mini RC cars

1:50 Nano City Dump Truck, RC truck, 2.4 GHz

500907684

€18.99

Construction trucks have long shaped city streets and building sites with their compact strength and unmistakable working profile. The 1:50 Nano City Dump Truck brings that familiar form into a small RC format with a true-to-original design, a detailed driver's cab and a ready-to-run setup for immediate use. Its fully assembled layout keeps the focus on driving, while the 146 g weight and 135 mm length create a handy format for controlled manoeuvres on tables, floors or improvised indoor routes. The open dump body gives the model its recognisable utility-truck silhouette, and the non-slip rubber tires provide the grip needed for cleaner starts, tighter turns and steadier movement on smooth surfaces. The 2-channel 2.4 GHz radio system supports interference-free control, which is especially useful when several radio-controlled models are active nearby. LED lighting adds another working-vehicle detail and makes the truck easier to track when the route runs through dimmer corners. Included in the set are the ready-to-run model, a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery, a USB charger and instructions. With up to 40 minutes of travel time, the compact dump truck suits quick driving sessions, small construction-themed layouts and repeated laps through indoor obstacle courses.

1:50 Nano City Dump Truck, RC truck, 2.4 GHz
1:87 M-B Unimog U406, RC truck, 100% RTR

RC models in 1:87 scale

1:87 M-B Unimog U406, RC truck, 100% RTR

500504177

€114.99

The Mercedes-Benz Unimog U406 has long stood for compact utility vehicle engineering, and this 1:87 RC version carries that character into a small-format driving model with a matching trailer. In bright orange with detailed paintwork and precise printing, the Unimog combines a true-to-original look with compact radio-control technology for controlled runs across a desk layout, a diorama road or a small indoor course. The 2.4 GHz remote control is part of the 100% RTR setup, so the model arrives with the core driving equipment already matched to the vehicle. Front and rear LEDs work alongside the switchable warning light to sharpen the service-vehicle appearance during operation. Steering trim on the transmitter helps fine-tune straight running, which is especially useful at 1:87 scale where small corrections show clearly. The permanently installed Li-Ion battery is rated at 3.7 V and 75 mAh, and the set also includes the required transmitter batteries plus a storage case for transport and tidy shelf keeping. The trailer broadens the operating scene beyond simple laps, with a tilting bed and removable tarpaulin that suit loading and unloading setups in miniature worksite or farm-style layouts. With age recommendation 14 years and up, the model fits hobby sessions focused on compact manoeuvres, display layouts and detailed vehicle handling in limited space.

1:87 M-B Unimog U406, RC truck, 100% RTR
1:87 VW T1 SambaBus, RC car, 2.4GHz RTR

- 25 %

RC models in 1:87 scale

1:87 VW T1 SambaBus, RC car, 2.4GHz RTR

500504164
€89.99

€119.99

The VW T1 SambaBus with trailer brings classic touring style into compact RC form at 1:87 scale. The ready-assembled set pairs the iconic bus silhouette with a matching caravan, while front and rear LED lights add visible presence during each run. A 2.4 GHz remote control system handles the model with fully proportional inputs, so throttle and steering respond in fine steps rather than simple on or off commands. Steering trim helps keep the vehicle tracking cleanly, especially on narrow routes and detailed miniature layouts. The 3.7 V 75 mAh Li-Ion drive battery supplies the power, and the transmitter also serves as the charging connection with a 60 minute charge time. The compact format and very small turning radius suit controlled driving in limited space where broader models would need more room. The combination of SambaBus and caravan creates a distinctive road-trip scene for shelf display, diorama use or active driving sessions. Included in the set are the ready-to-run model, the 2.4 GHz remote control system, the Li-Ion drive battery and 4 AAA transmitter batteries, so the model is equipped for use straight from the set.  Warning! Not suitable for children under 14 years.

1:87 VW T1 SambaBus, RC car, 2.4GHz RTR
Bella Luisa 2.4G, RC boat, 100% RTR

RC yachts

Bella Luisa 2.4G, RC boat, 100% RTR

500108055

€69.99

Classic runabout styling meets radio-controlled action in the Bella Luisa 2.4G 100% RTR. The 455 mm motorboat combines a glossy wood-look finish, a clear curved windshield and chrome-look deck details with full steering control, creating a striking presence on ponds and small lakes. The hull measures 455 x 105 x 140 mm and weighs 648 g, giving the boat a slim, low profile on the water. Inside the set are a 2.4 GHz transmitter, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA transmitter batteries, so the model is fully assembled and ready for operation. The propeller drive reaches up to 10 km/h, while the water-activated motor start means the propeller engages only when the boat is on the surface. The detailed fairing and driver's cabin shape add to the leisure-boat look, and the cockpit area offers space for a play figure. On a calm garden pond, the responsive left-right and forward-reverse controls support neat manoeuvres along the bank or broad passes across open water. A driving time of up to 25 minutes leaves room for longer sessions before the battery returns to the USB charger.

Bella Luisa 2.4G, RC boat, 100% RTR
1:10 Bokusa BL 2S 4WD RTR, RC car, yellow

RC truggies & RC monster trucks

1:10 Bokusa BL 2S 4WD RTR, RC car, yellow

500404321

€219.99

The 1:10 Bokusa BL 2S 4WD RTR brings brushless power and monster truck stance into a ready-to-run RC car built for fast off-road sessions. Its 455 x 312 x 180 mm format and 2165 g weight give the chassis a planted footprint, while the yellow body adds a bold trackside look. A 30 kg waterproof steering servo with metal gears handles steering input with firm control, and the fully ball bearing mounted transmission supports efficient running across the drivetrain. Metal differentials at the front and rear use steel bevel gears, adding a solid mechanical base for repeated acceleration and braking. The 2.4 GHz remote control system is included, and the radio system is water-protected for running in changing ground conditions. An XT90 high-voltage battery connector system and a quick-change battery mount keep battery swaps straightforward between sessions. With a stated runtime of up to 15 minutes, the model suits short, fast runs on dirt, gravel and uneven surfaces where suspension travel and tyre grip can be used fully. Age 14 Years. A battery is required separately.  Warning! Not suitable for children under 14 years.

1:10 Bokusa BL 2S 4WD RTR, RC car, yellow
1:10 XS Tekuro, RC car, 100% RTR 4WD

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 100% RTR 4WD

500404361

€199.99

The 1:10 XS Tekuro brings a fast off-road setup into a ready-to-run format, combining permanent 4WD, a high-torque 550 brushed motor and up to 40 km/h for lively runs across dirt, gravel and rough ground. At 410 mm long, 300 mm wide and 175 mm high, the chassis carries a broad monster-truck stance that suits uneven terrain and quick direction changes. Completely mounted on ball bearings, the drivetrain is built to reduce drag through the transmission, while metal differentials at the front and rear use steel bevel gears for direct power transfer under load. The XT60 high-voltage battery plug-in system supports a secure connection for the included 7.4 V 2600 mAh Li-Ion battery pack, and the quick-change battery holder keeps swaps straightforward between sessions. Weight comes in at 1741 g, giving the chassis enough mass to stay settled as the suspension works through bumps. The rear bumper integrates a wheelie bar that supports controlled lift when the motor loads up hard from a standing start. The scope of delivery includes the 100% RTR model, 2.4 GHz remote control system, 2600 mAh 7.4 V drive battery, 1 A USB charger, 4 LR06 AA transmitter batteries and a manual. Driving time is about 15 minutes, making the XS Tekuro a strong fit for park runs, compact off-road tracks and loose-surface sessions where quick setup and solid traction matter.  Warning! Not suitable for children under 14 years.

1:10 XS Tekuro, RC car, 100% RTR 4WD
1:12 Glow Rider, RC buggy, 2.4 GHz RTR

RC cars

1:12 Glow Rider, RC buggy, 2.4 GHz RTR

500404299

€54.99

The Glow Rider brings 1:12 RC buggy action together with vivid LED lighting, creating a strong visual presence when the track gets darker and the body starts to glow in motion. At 340 x 215 x 123 mm and 570 g, the model combines a compact footprint with a planted off-road stance that suits quick direction changes and fast evening runs. The 2.4 GHz control system supports multiplayer driving without the close-range interference common to older frequency setups, which helps keep each buggy responsive during shared sessions. Full suspension works beneath the low body shell to absorb uneven ground and keep steering inputs more consistent over rougher surfaces. Grippy off-road tyres add traction where loose dirt, gravel or short grass would unsettle a road-focused setup. The ready-to-run package includes the assembled model, a Li-Ion drive battery, a USB charger and 2 AA transmitter batteries, so the full driving setup is in the box from the start. Age recommendation: 8 years and up. A paved yard at dusk, a compact dirt section in the park or a smooth evening track all suit the Glow Rider well, especially when the illuminated body can stand out against lower light. Up to 25 minutes of driving time at full capacity gives each session enough length for repeated laps, quick races and steady practice with throttle and steering control.

1:12 Glow Rider, RC buggy, 2.4 GHz RTR
1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR

RC cars

1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR

500404351

€54.99

The Lamborghini Murcielago SV translates the dramatic lines of the full-sized supercar into a 1:14 RC model with compact road presence and strong visual detail. At 330 mm long, 145 mm wide and 80 mm high, the body carries opening doors and a lifting hood that add hands-on interaction beyond pure driving. The detailed interior gives the cabin more depth when the body is viewed up close, while the front and rear LED system keeps the silhouette readable in lower light. A differential gear manages the drive effect between the wheels during turns, which helps the model hold a cleaner line through changing corners. Fully sprung suspension adds another mechanical layer, allowing the chassis to settle more evenly as the surface changes. The model weighs 631 g, giving it a planted feel in motion without losing the agile character expected from this scale. The fully assembled 100% RTR format keeps the focus on driving rather than setup, with a 2.4 GHz remote control unit included in the set. Also included are the 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR06 batteries. Driving time reaches up to 25 minutes, making the model well suited to repeated laps, short handling sessions and display breaks between runs.

1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR
1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor

RC tractors

1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor

500907704

€84.99

The DEUTZ-FAHR 8280 TTV is recreated here as a 1:16 RC tractor with a detailed body, realistic driving functions and a strong farm vehicle presence. At 400 mm long, 180 mm wide and 234 mm high, the model carries the proportions of the original into a format that suits both active driving and shelf display. The ready-to-run set includes the tractor, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 transmitter batteries. Engine sound and horn add direct control inputs beyond steering and throttle, giving each run a more lifelike operating feel. The licensed DEUTZ-FAHR design is supported by cab details, body shaping and the characteristic tractor layout. With 5 frequency channels, the radio system provides stable control for solo driving sessions. Driving time reaches up to 90 minutes, allowing longer runs before recharging. On the floor at home, along a garden path or across lightly uneven ground, the compact dimensions and rigid axle help the tractor stay composed as it changes direction and tracks through tighter sections. Age 8 years+ marks the recommended age for use.

1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor
1:16 Volvo EC 160E, RC excavator, 100% RTR

RC diggers

1:16 Volvo EC 160E, RC excavator, 100% RTR

500907694

€199.99

The Volvo EC 160E brings excavator handling into 1:16 scale with a ready-to-run RC setup, a true-to-original driver's cab and a working crawler layout built around 2 separately driven chains. With an operating weight of 2354 g and dimensions of 252 x 168 x 180 mm, the model carries a substantial presence while remaining manageable for controlled indoor driving and digging sessions. Its function package focuses on coordinated arm work rather than simple forward travel. The lifting arm and stick are made of plastic, and the spindle drive system moves the lifting arm, stick and bucket through deliberate, mechanical action that suits loading, lifting and placement tasks. The 2.4 GHz radio system supports single-user control, and the maximum operating time of up to 190 minutes allows longer work cycles before recharging. The included sheet metal shovel, scrap grab and excavator chisel shift the machine from earthmoving to gripping and breaking scenarios without changing the core vehicle. On a floor-based building site layout, the excavator can turn the uppercarriage through 360° to pick up, swing and place material within a compact work zone. The RTR package includes the model, remote control system, 7.4 V 1200 mAh Li-Ion drive battery, 3 LR06/AA transmitter batteries and instructions.  Warning! Not suitable for children under 14 years.

1:16 Volvo EC 160E, RC excavator, 100% RTR
1:8 Drakuro BL 3S 4WD RTR, RC car

RC buggys

1:8 Drakuro BL 3S 4WD RTR, RC car

500409096

€299.99

The 1:8 Drakuro BL 3S 4WD RTR brings brushless power, long-travel suspension, and a wide off-road stance into a ready-to-run RC car built for fast runs across mixed terrain. With a length of 500 mm, width of 370 mm, height of 330 mm, and weight of 3402 g, the chassis carries the planted footprint needed for high-speed driving and rough-surface control. A waterproof 30 kg steering servo with metal gears gives the front axle the force needed for direct steering inputs, while splash-proof electronics and housing support running where dust, spray, and loose dirt are part of the session. Steel differentials at the front and rear distribute drive through the drivetrain, and height-adjustable body mounts allow the shell position to be matched to the setup. The XT90 high-current connector system is designed for low-loss power transmission, supporting the demands of the brushless drive package under load. LED lighting at the front, rear, and roof keeps the body easy to track as conditions darken, and the rear bumper integrates a wheelie bar for hard launches under strong acceleration. The ready-to-run set includes a 2.4 GHz remote control and instructions. 14 Years marks the recommended age.  Warning! Not suitable for children under 14 years.

1:8 Drakuro BL 3S 4WD RTR, RC car
1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR

- 24 %

RC models in 1:87 scale

1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR

500504147
€79.99

€104.99

Few cars carry the visual identity of the Volkswagen Beetle as clearly as this 1:87 RC version in red. The rounded body shape, detailed paintwork and decoration, and illuminated front and rear LED lights bring the classic silhouette into motion on a compact scale. The ready-to-run set includes the assembled model, a 2.4 GHz remote control system, a 3.7 V 40 mAh Li-Ion drive battery and 4 AAA transmitter batteries. Fully proportional control allows measured throttle and steering inputs instead of simple on-off commands, which gives the small chassis a more precise feel in confined spaces. Steering trim on the transmitter supports straight tracking when fine corrections are needed. The transmitter also handles charging, with a 45-minute quick-charge time matched by a driving time of up to 45 minutes. A storage showcase is included for keeping the model protected between runs. With its very small turning radius, the miniature Beetle suits short indoor routes, desk-side driving and detailed diorama settings where tighter corners matter. The 1:87 scale also makes it a strong fit for collectors and model-layout enthusiasts who want a drivable classic car with compact dimensions and a finished RTR setup.

1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR
1:87 VW T1 Pritsche, RC car, green trailer

RC models in 1:87 scale

1:87 VW T1 Pritsche, RC car, green trailer

500504179

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 RC version captures that familiar silhouette in a compact format with a green car trailer behind it. The radio-controlled layout turns the classic VW T1 Pritsche into a moving scale model that combines display character with active handling on a small footprint. Its 1:87 scale makes the model easy to place on layouts, shelves, or desks where larger vehicles would need far more room, while the trailer adds a second visual element that extends the transporter theme beyond the cab itself. The green finish gives the combination a clear, period-inspired presence, and the Pritsche body style keeps the utility look of the original vehicle at the centre of the design. As a powered ground vehicle, it brings motion to a format often chosen for static collecting, which changes how the model can be used between display moments and controlled runs. 5 batteries are included. The age marking is 14 Years. The compact dimensions implied by 1:87 scale suit short driving sessions on smooth indoor surfaces, model layouts, or table-based scenes where precise movement matters more than outright speed. It also fits neatly into collections built around classic transport themes, especially where a trailer combination adds extra visual interest without taking over the whole scene.

1:87 VW T1 Pritsche, RC car, green trailer
Cyber Drone Polizei, quadcopter, 2.4G RTF

RC quadcopters

Cyber Drone Polizei, quadcopter, 2.4G RTF

500507186

€34.99

The Cyber Drone Polizei 2.4G 100% RTF brings compact quadcopter flying into a ready-to-fly format with a 2.4 GHz remote control, a 3.7 V 600 mAh LiPo battery and a USB charger. With a length of 125 mm, a width of 135 mm, a diameter of 150 mm and a rotor diameter of 45 mm, the layout stays light at 50 g ascent weight and suits quick take-offs in smaller open spaces. Its control setup combines several functions that shape how the model behaves in the air. The 8 minute flight time supports short, focused rounds, while the included transmitter power uses 3 AAA batteries. The headless mode changes orientation handling by referencing the control direction rather than the nose position, which helps keep steering inputs easier to read during turns. Trim adjustment for left and right flight allows finer correction when the quadcopter drifts off line. Blue and red flashing LEDs remain easy to spot once the model lifts away from the launch point. Ready-to-fly equipment keeps the set focused on getting airborne with minimal preparation, whether the session starts on a driveway, in a yard or across a calm section of park ground. The compact dimensions, return function and selectable speed levels make it easy to alternate between steady hovering, directional practice and quick stunt passes in the same outing.

Cyber Drone Polizei, quadcopter, 2.4G RTF
Magic Machine 2.0, RC car, 2.4 GHz RTR

RC cars

Magic Machine 2.0, RC car, 2.4 GHz RTR

500404325

€49.99

The Magic Machine 2.0 brings a striking twist to RC driving with a body that changes function at the touch of a button. In one moment it runs as a flat racer, and in the next it shifts into an off-road configuration with more ground clearance, creating a fast change of character on asphalt, ramps and rougher sections. Its layout combines separately steered front and rear units with all-wheel drive, so both axles work together as the vehicle changes direction. That unusual steering concept gives the model its own driving feel and supports quick reactions when obstacles appear in the path. The body design also allows the machine to flip backward over obstacles, continue driving on its back and right itself again to keep moving. LED lighting adds another visible detail during use, while the contrasting top and bottom styling makes each rollover part of the visual effect rather than a stop in the action. With a length of 340 mm, a width of 215 mm and a height of 123 mm, the model has a compact footprint matched by a weight of 570 g. The included Li-Ion drive battery delivers up to 25 minutes of driving time and is paired with a USB charger. A 2.4 GHz remote control in a game controller style is included, along with 2 AA transmitter batteries, so the ready-to-run set is equipped for immediate use after charging.

Magic Machine 2.0, RC car, 2.4 GHz RTR
Stinger 2.0 2.4GHz 100% RTF, RC airplane

RC aircraft

Stinger 2.0 2.4GHz 100% RTF, RC airplane

500505038

€49.99

The Stinger 2.0 2.4GHz 100% RTF brings a light 29 g airframe, intelligent gyro electronics and a ready-to-fly setup into one compact RC airplane built for controlled first flights and relaxed repeat sessions. With a length of 315 mm and a width of 385 mm, the model carries a broad wing layout that gives the aircraft a clear presence in the air while keeping the format easy to transport to open flying spaces. The Flexipor construction keeps weight low and supports the light handling that suits this class, while the 2.4 GHz control system allows clean command input without cable setup. A 3.7 V 300 mAh LiPo battery powers the airplane, and charging runs through the included USB charger. Spare rotor blades are included for continued use after routine wear, and the included 2x AA batteries complete the transmitter power supply. The gyro system works with the control inputs to calm the model in flight, which helps maintain a steadier line during climbs, gentle turns and landing approaches. Open ground, a sports field or another suitable flying area gives the 385 mm wingspan room to work through smooth passes and repeated take-offs. The ready-to-fly format keeps preparation focused on charging, switching on and heading into the next 20-minute flying session.

Stinger 2.0 2.4GHz 100% RTF, RC airplane
1:10 Bokusa BL 2S, RC car, 4WD RTR

RC truggies & RC monster trucks

1:10 Bokusa BL 2S, RC car, 4WD RTR

500404320

€219.99

The 1:10 Bokusa BL 2S brings brushless power, 4WD traction and RTR convenience into a 455 mm off-road machine built for fast, dirt-focused running. With a width of 312 mm, a height of 180 mm and a weight of 2165 g, the chassis carries a broad, planted stance that suits rough ground and quick direction changes. Metal differentials at the front and rear use steel bevel gears to distribute drive across the axle line, while the fully ball bearing mounted transmission supports efficient running through the drivetrain. A 30 kg waterproof steering servo with metal gears gives the front end firm steering authority in wet or dusty conditions, and the water-protected 2.4 GHz remote control system keeps control input stable during outdoor sessions. The XT90 high-voltage battery connector system is paired with a quick-change battery mount, so battery swaps stay straightforward between runs. Age recommendation: 14 years and over. As an RTR model, the Bokusa BL 2S is set up for immediate driving once the required power source is added. Gravel tracks, compacted dirt and uneven open ground suit the suspension layout and tyre format especially well, while repeated acceleration runs benefit from the wheelie bar at the rear. Batteries are required separately.  Warning! Not suitable for children under 14 years.

1:10 Bokusa BL 2S, RC car, 4WD RTR
1:10 XS Ryken, RC buggy, 100% RTR 4WD

RC truggies & RC monster trucks

1:10 XS Ryken, RC buggy, 100% RTR 4WD

500404363

€199.99

The 1:10 XS Ryken brings fast off-road running into a compact RTR format, pairing a 550 brushed motor with permanent 4WD for direct launches and steady pull across mixed terrain. At 410 x 300 x 175 mm and 1741 g, the buggy carries a broad, planted stance that suits dirt tracks, gravel paths and uneven ground. Power reaches the wheels through hardened steel drive shafts and a central steel cardan shaft, while front and rear metal differentials with sealed steel bevel gears keep the drivetrain precise under load. A chassis mounted on ball bearings supports efficient running, and the splashproof housing and electronics keep light rain and wet ground from stopping the session. The rear wheelie function uses targeted torque and traction control to lift the front end under acceleration, adding a distinct driving character beyond straight-line speed. A rear spoiler and rollover cage complete the body with added protection for the shell and electronics during tip-overs. The 100% RTR setup arrives pre-assembled with a 2.4 GHz remote control system, a 7.4 V 2600 mAh drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. That makes the XS Ryken ready for immediate running on open ground, from compact backyard courses to rougher off-road stretches where grip, suspension travel and drivetrain control all come into play.  Warning! Not suitable for children under 14 years.

1:10 XS Ryken, RC buggy, 100% RTR 4WD
1:10 XS Ryken, RC car, 100% RTR 4WD blue

RC truggies & RC monster trucks

1:10 XS Ryken, RC car, 100% RTR 4WD blue

500404362

€199.99

The 1:10 XS Ryken brings off-road action into a 410 mm long RC car with a wide 300 mm stance, 175 mm height and a ready-to-run setup built for immediate driving. Its blue body sits over a layout tuned for rough ground, where the combination of 4WD and generous clearance gives the chassis the grip needed for loose tracks, uneven paths and dusty sections. Power comes from a 550 brushed motor paired with a 7.4 V 2600 mAh Li-Ion drive battery, delivering up to 40 km/h and around 12 minutes of driving time. The hardened steel drive shafts transfer power with minimal play, while the sealed steel differential gears support clean, direct drivetrain response when dirt and vibration build up. The integrated wheelie function adds a distinct handling character by managing torque and traction so the front end can rise under acceleration. Oil-damped suspension helps the car settle after bumps and keeps the tyres working across broken surfaces. As a 100% RTR model, the set includes the ready-to-run vehicle, a 2.4 GHz remote control system, the drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. With a weight of 1741 g, the chassis carries enough presence for stable running on open ground, gravel stretches and wet outdoor surfaces where splashproof electronics matter.  Warning! Not suitable for children under 14 years.

1:10 XS Ryken, RC car, 100% RTR 4WD blue
1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR

RC models in 1:87 scale

1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR

500504148

€114.99

The Volkswagen Beetle became one of the most recognisable car shapes of the 20th century, and this 1:87 RC version pairs that silhouette with a matching trailer for a compact driving set with strong period character. Detailed paintwork and decoration, front and rear LED lights, and the rounded body lines give the miniature a clear display presence even when parked between runs. Its 2.4 GHz radio system uses fully proportional control, so steering and throttle inputs can be adjusted smoothly instead of switching only between stop and full power. Steering trim helps fine-tune straight running, and the very small turning radius suits narrow routes on desks, shelves or indoor floors where larger RC models need more space. The included 3.7 V 40 mAh Li-Ion drive battery keeps the format compact, and the transmitter handles charging in 45 minutes. A storage showcase is included for presentation between driving sessions, and the set is marked 14+. The trailer adds a second moving element to the setup, changing the handling feel as the Beetle pulls a compact load through bends and turnarounds. Short evening runs, shelf display, or a small tabletop course all suit the 1:87 format, with the illuminated front and rear sections staying easy to spot as the model moves through tighter spaces.  Warning! Not suitable for children under 14 years.

1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR
Cyber Drone IR RTF, quadcopter, 360° flips

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

500507188

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a nimble 125 mm x 135 mm format with a 150 mm diameter and a 45 mm rotor diameter. A button-triggered 360° flip function adds fast aerial action, while the Coming Home function returns the quadcopter to its home point at the touch of a button, creating a clear, easy rhythm between short flights and recovery. Its 3.7 V/600 mAh LiPo flight battery supports up to 8 minutes of flight time, and the 50 g ascent weight keeps the model light in the air. The IR control concept is paired with 3 speed settings, so the handling can stay measured for early practice or become more lively for tighter reactions. Blue LED lighting adds clear visual orientation once the quadcopter lifts off, especially when the frame is moving quickly through flips, turns and short climbs. The green finish gives the model a bright, high-contrast look in motion. Short sessions in the living room, open indoor areas or calm practice runs with repeated take-offs and landings all suit this ready-to-fly setup. Included contents are the ready-to-fly model, IR remote control, LiPo flight battery 3.7 V/600 mAh, USB charger and instruction manual.

Cyber Drone IR RTF, quadcopter, 360° flips
Italeri B.M.W. 320 Gr. 5 Model Kit 1:24

Model car kit

Italeri B.M.W. 320 Gr. 5 Model Kit 1:24

510003626

€36.99

The Italeri B.M.W. 320 Gr. 5 model kit in 1:24 scale brings a landmark touring car racer onto the workbench with the broad-shouldered Group 5 silhouette, race number 57 and the vivid 1978 DRM Norisring livery. As the build takes shape, the E21-based body, large fenders and rear wing give the car its unmistakable circuit stance. This assembly kit draws on the competition version developed after the FIA introduced the Group 5 rules in 1976 for special production cars. The real car used a new aerodynamic profile and a 300 hp engine, and that racing character carries through the model's proportions and surface details. Separate parts on black sprues form the chassis tub, suspension elements, cockpit fittings and exterior sections, so the structure develops in clear stages. The decal sheet goes beyond body graphics with driver identification, instrument faces and mechanical markings that sharpen the finished presentation. Assembly is required, with a stated build time of 600 minutes. On a hobby desk, the 1:24 scale supports careful painting, decal placement and final body fitment without crowding fine details. Once completed, the B.M.W. 320 Gr. 5 suits shelf display, diorama use or a line-up with other classic circuit racers from the same era.

Italeri B.M.W. 320 Gr. 5 Model Kit 1:24
RC Boot Rescue 2.4G, RC boat, ready to run

RC speed boats

RC Boot Rescue 2.4G, RC boat, ready to run

500108058

€39.99

The RC Boot Rescue 2.4G brings rescue-boat styling and quick radio-controlled handling together in a compact 350 mm format. The red and yellow hull, raised cabin and roof light details create a clear emergency-service look on the water, while the 2.4 GHz control system keeps commands responsive during fast passes and tighter steering inputs. At 95 mm wide and 105 mm high, the boat combines a slim profile with a stable stance for controlled manoeuvres. Forward, backward, left and right control allows precise handling around pool edges, small obstacles and turning points. The fully assembled model comes as a ready-to-run set with remote control, a 3.7 V 1200 mAh Li-Ion battery, a USB charger and 2 x LR06 AA transmitter batteries. With a weight of 270 g, the hull stays easy to carry to the water and simple to set down for the next run. The water-activated circuit keeps the drive inactive on land and switches operation on only in water. Up to 40 minutes of running time supports longer sessions at the pond or in a larger pool, and the 2 spare propellers add a practical replacement set for regular use. Age recommendation: 8 years+

RC Boot Rescue 2.4G, RC boat, ready to run
1:10 Cage Fighter, RC buggy, 2.4GHz RTR

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

500404302

€74.99

The 1:10 Cage Fighter brings desert buggy styling, radio-controlled handling and ready-to-run convenience into one fast-moving off-road setup. As a fully assembled RC buggy with 2.4 GHz control, it heads straight into dirt tracks, packed gravel and open ground with a low barrier to entry and a focused motorsport feel. Its full suspension supports precise steering response when the surface turns uneven, while the grippy off-road tyres help the buggy hold traction across changing terrain. Solid bumpers at the front and rear add protection in the zones that take the hardest knocks during close running. At 436 mm long, 234 mm wide and 147 mm high, the chassis has a planted footprint that suits outdoor driving, and the 806 g weight keeps the model agile in direction changes. The included Li-Ion drive battery runs at 7.4 V with 500 mAh capacity, and the set also includes a USB charger, a 2.4 GHz remote control and 2 x LR06/AA transmitter batteries. Top speeds of up to 18 km/h add a brisk pace without pushing the model beyond approachable control. Whether the route runs over compacted soil, short grass or rougher backyard ground, the Cage Fighter is built for active RC sessions rather than shelf display. Age 8+ marks the recommended age, and the 100% RTR format keeps the focus on charging the battery, taking the controller in hand and getting the buggy moving.

1:10 Cage Fighter, RC buggy, 2.4GHz RTR
1:10 Cage Fighter, RC buggy, 2.4GHz RTR

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

500404303

€74.99

The 1:10 Cage Fighter brings fast off-road RC action into a ready-to-run format with a fully assembled chassis, 2.4 GHz radio control and a 7.4 V 500 mAh Li-Ion drive battery. At 436 mm long, 234 mm wide and 147 mm high, the buggy cuts a planted stance as it charges over dirt, gravel and uneven ground. Its full suspension helps the wheels stay in contact with the surface, so steering inputs translate into cleaner direction changes instead of skittish bouncing. The 806 g vehicle weight supports an agile feel without losing presence on the track. Front and rear bumpers frame the chassis with added protection in the zones that meet obstacles first, which suits repeated running in tighter spaces and rougher outdoor sections. The included USB charger keeps the battery routine straightforward, and the supplied 2 x LR06 AA transmitter batteries complete the set. With a driving time of 25 minutes and speeds of up to 19 km/h, the Cage Fighter suits short backyard sessions, improvised dirt courses and casual head-to-head runs with other 2.4 GHz models. Age 8+ is stated for this RC buggy, making it a strong entry point into radio-controlled driving while still offering enough pace and control to stay engaging beyond the first outings.

1:10 Cage Fighter, RC buggy, 2.4GHz RTR
1:10 Night Racer 2.0, RC car, 2.4GHz RTR

- 33 %

RC cars

1:10 Night Racer 2.0, RC car, 2.4GHz RTR

500404249
€49.99

€74.99

The Night Racer 2.0 brings low-slung on-road styling and ready-to-run RC action into one focused 1:10 setup, with a 2.4 GHz control system and a top speed of 20 km/h shaping fast laps on smooth ground. At 485 mm long, 200 mm wide and 125 mm high, the body cuts a sharp racing silhouette that stands out in motion and under evening light. A 260 mm wheelbase and a weight of 737 g give the chassis a balanced footprint for quick steering inputs and stable tracking through linked corners. The differential transmission helps the driven axle work cleanly when the car changes direction, while the suspension layout keeps the wheels in contact over uneven patches and transitions. The included 7.4 V 1200 mAh Li-Ion drive battery supports up to 40 minutes of driving time, and the USB charger keeps the running gear simple to prepare between sessions. Detailed paintwork adds a finished motorsport look, and the blue illuminated rim design sharpens the visual effect once the light drops. On a driveway, in a car park or across a smooth indoor surface, the RTR setup gets the car moving with the supplied remote control system and included transmitter batteries. The compact racing profile, quick response and illuminated wheel styling suit short speed runs, repeated corner practice and evening cruising alike.

1:10 Night Racer 2.0, RC car, 2.4GHz RTR
1:12 RaceRival Combo, RC car, 2.4G RTR

RC cars

1:12 RaceRival Combo, RC car, 2.4G RTR

500404297

€59.99

The 1:12 RaceRival Combo brings 2 fully assembled RC cars into one set, creating instant side-by-side racing with matching 2.4 GHz radio control. Each model measures 304 mm in length and uses a 3.7 V Li-Ion drive battery with 500 mAh capacity, giving the pair a compact racing format with rechargeable power for repeated sessions. The set includes 2 remote controls, 2 Li-Ion drive batteries, 2 USB chargers and 4 AA transmitter batteries, so both vehicles are equipped for running from the start. A maximum driving time of 40 minutes keeps races going beyond a quick sprint and leaves room for repeated heats, overtaking attempts and back-to-back comparisons between the 2 cars. The pistol-grip transmitters use a trigger for throttle input and a side steering wheel layout familiar from hobby-grade RC driving. Steering fine adjustment on the vehicles helps correct the running direction when the track or surface calls for a more precise setup. Front LED lighting remains clearly visible as the cars move through indoor floors or paved outdoor sections, while the printed body shells give each model its own strong race-day presence. With an age marking of 8 years and up, the set suits shared racing sessions at home, quick duel formats in the driveway and casual practice laps where both cars can be charged, lined up and sent off again.

1:12 RaceRival Combo, RC car, 2.4G RTR
1:14 3-axle Material trailer, RC trailer

RC lorries & RC trucks

1:14 3-axle Material trailer, RC trailer

500907740

€699.99

At 1:14 scale, this 3-axle Material trailer brings the look and handling of a working cargo hauler into a detailed RC setup. The 981 mm long body combines a laser-cut steel frame in 3 mm and 1 mm sections with a real wooden floor application, creating a technical build with strong visual contrast between metal structure and load bed. The front wall is made from aluminium, while the rear bumper uses 8 mm aluminium for a solid, sharply defined finish. Left and right steel underride protection adds another authentic construction detail to the lower sides. The CNC-milled aluminium dropsides carry engraved surfaces and are built for active use rather than fixed display, with 9 functional panels, removable dropside posts, and 4 hinges on each dropside made from 1 mm steel. Neodymium magnets handle the locking, giving the side sections a tidy closing action without bulky external catches. Wide chromated wheels with ball bearings and wide tyres support smooth trailer movement, and the included suspension offers an optional 8 mm elevation for a different ride height. A steel spare wheel holder with spare wheel is fitted, and the finished trailer measures 981 x 195 x 210 mm with a weight of 6,900 g. Age 14+

1:14 3-axle Material trailer, RC trailer
1:14 Goldhofer BAU STN-L3, low loader kit

Models & trailers

1:14 Goldhofer BAU STN-L3, low loader kit

500907060

€584.99

Heavy-haul transport has a distinct presence in scale form, and the Goldhofer BAU STN-L3 brings that character into a 1:14 low loader kit with a long 1000 mm body, a width of about 200 mm, and a height of 270 mm. The laser-cut, hard-soldered steel profile construction gives the trailer its technical look, while the plateau with tailgate extends the transport layout for detailed truck scenes. The build centres on mechanical functions that suit model-building enthusiasts. The split folding loading ramps are arranged in 3/4 and 1/2 sections and can be folded down by hand for driving operation. A ramp length of 290 mm in the raised configuration is stated in the data. Three rear axles carry twin tyres, and the axle area is detailed with dummy air springs for a scale heavy-duty appearance. Ball bearing mounting supports the running gear, and the 7-chamber taillights can be retrofitted electrically. All columns are mechanically adjustable, and the front support area can be expanded with optional E-support legs. The trailer fits all Tamiya trucks, making it a strong match for detailed tractor units in 1:14 truck layouts. On a workshop bench, in a transport diorama, or coupled for slow manoeuvres with scale cargo, the low deck, upright ramp geometry, and multi-axle layout create the look of a working heavy equipment hauler. Age 14 Years  Warning! Not suitable for children under 14 years.

1:14 Goldhofer BAU STN-L3, low loader kit
1:16 Deutz-Traktor 8280TTV, RC tractor

RC tractors

1:16 Deutz-Traktor 8280TTV, RC tractor

500907706

€109.99

The Deutz-Traktor 8280TTV in 1:16 scale brings agricultural RC driving into a compact format with a matching trailer and a fully equipped ready-to-run setup. The model uses a 2.4 GHz remote control system and arrives with the drive battery, USB charger and 2 x LR03 AAA transmitter batteries, so all core components for operation are already in the box. Its 7.4 V system pairs with a 500 mAh Li-Ion battery to deliver up to 90 minutes of operating time, giving the tractor enough endurance for repeated hauling runs, careful reversing and steady trailer work. The trailer adds a second handling element to each session, since turns, alignment and positioning need more control than a single vehicle on its own. With 5 frequency channels available, the radio setup supports controlled input during forward runs, direction changes and tighter manoeuvres. The ready-to-run format keeps the focus on driving rather than sourcing the basic operating equipment separately. On the floor, the tractor and trailer combination suits routes with bends, loading-play setups and repeated parking tasks where the longer overall shape changes how each turn is approached. The 8+ age marking fits a model that combines vehicle control, trailer guidance and battery-powered runtime in one clearly structured RC format.

1:16 Deutz-Traktor 8280TTV, RC tractor
1:24 Ford GT, RC car, 2.4 GHz RTR

RC cars

1:24 Ford GT, RC car, 2.4 GHz RTR

500404330

€24.99

The Ford GT became one of the defining super sports car shapes of its era, and this 1:24 RC car brings that low, wide silhouette into a compact format built for quick laps and precise control. With a fully assembled ready-to-run setup, the model goes straight from charging to driving with the included 2.4 GHz remote control, Li-Ion drive battery, USB charger and transmitter batteries. At 195 mm long, 80 mm wide and 49 mm high, the body keeps the proportions of the road car clear while staying easy to handle on smaller indoor routes. The 172 g weight gives the chassis a light, agile feel in motion, and the fine-tuned steering supports accurate line changes through short straights and tighter bends. Front and rear LED lighting extends the visual effect beyond daylight conditions, while the licensed Ford design and realistic sports car look keep the model closely tied to its full-size inspiration. The 3.7 V drive system uses a 500 mAh Li-Ion battery and reaches up to 60 minutes of driving time at full capacity, making longer sessions possible without frequent charging breaks. Non-slip rubber tires work with the rear differential to maintain traction and stable handling as the car accelerates, turns and settles into repeated circuit runs. Age 6+ marks the recommended age, and the complete RTR format suits first RC laps as well as relaxed driving sessions for motorsport fans.

1:24 Ford GT, RC car, 2.4 GHz RTR
1:8 Rock Wilder, RC car, 100% RTR

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

500404257

€174.99

The 1:8 Rock Wilder brings large-scale off-road presence to every run with a 530 mm long chassis, full suspension and digital proportional control. In black and red trim, the ready-to-run setup pairs a type 550 brushed motor with water-resistant RC components for driving on mixed terrain where dust, loose gravel and uneven ground are part of the appeal. Its 355 mm width and 220 mm height give the model a broad, stable stance, while the 2552 g weight adds substance as the suspension works through ruts and bumps. Reinforced suspension arms support the independent layout at each corner, and the quick-change battery mount keeps battery swaps straightforward between sessions. The included 7.4 V 3000 mAh Li-Ion drive battery, USB charger, 2.4 GHz remote control and 4× LR06 transmitter batteries cover the core running equipment in one box. Age recommendation: 14 years+ The Rock Wilder suits trackside bashing, open gravel areas and compact dirt routes where the proportional steering and throttle inputs can be used with precision. Water-resistant electronics help the model stay focused on the route when conditions turn messy, and the RTR format keeps the emphasis on charging up and heading out for the next run.  Warning! Not suitable for children under 14 years.

1:8 Rock Wilder, RC car, 100% RTR
1:87 MB 1620 flatbed truck, RC model, RTR

RC models in 1:87 scale

1:87 MB 1620 flatbed truck, RC model, RTR

500504159

€129.99

The 1:87 MB 1620 flatbed truck with trailer brings compact RC control into H0 railway scenes with a fully assembled 100% RTR setup and finely scaled proportions. At 187 mm in length, the model is sized for dioramas and model railroad layouts where precise movement, lighting and sound add life to streets, depots and loading areas. A 2.4 GHz remote control system handles steering, speed and the switchable engine sound, while the integrated 3.7 V 75 mAh Li-Ion drive battery recharges through the transmitter in about 45 minutes. Front and rear LED lighting supports realistic operation in dimmer layout settings, and the very small turning circle helps the truck work through narrow routes and confined manoeuvring zones. The detailed body uses high-quality plastic construction with fine printing, and the removable tarpaulin changes the look of the trailer for different scene setups. A driver figure adds another scale detail for display, and the included trailer extends the vehicle's presence in transport scenes. With up to 60 minutes of operating time, the model suits longer running sessions on H0 layouts, from careful reversing at a loading bay to steady road movement between buildings and trackside structures.  Warning! Not suitable for children under 14 years.

1:87 MB 1620 flatbed truck, RC model, RTR
1:87 Mercedes Benz 200/8 Taxi, RC car, RTR

RC models in 1:87 scale

1:87 Mercedes Benz 200/8 Taxi, RC car, RTR

500504171

€109.99

The Mercedes Benz 200/8 shaped the look of everyday saloons in the late 1960s and 1970s, and this 1:87 RC car brings that familiar taxi silhouette into a compact radio-controlled format. The small scale and RTR layout combine classic road-car character with immediate driving action on desks, display areas, or smooth indoor surfaces. Its 100% RTR specification means the key running setup is already part of the set, keeping the focus on steering inputs and controlled movement rather than sourcing core equipment first. The included 5 batteries support a ready-to-start configuration straight from the pack. With a recommended age of 14 years, the handling and scale suit enthusiasts who enjoy compact vehicle models with a recognisable real-world subject. The taxi styling gives the body a distinct period look that stands apart from modern racing or off-road themes. Between short driving sessions, the 1:87 format also makes the model easy to place in a collection of miniature road vehicles. It works well as a small RC model for indoor runs, as a conversation piece on a shelf, or as a classic Mercedes Benz subject in a compact hobby lineup.  Warning! Not suitable for children under 14 years.

1:87 Mercedes Benz 200/8 Taxi, RC car, RTR
1:87 Mercedes Benz 200/8, RC car, 100% RTR

RC models in 1:87 scale

1:87 Mercedes Benz 200/8, RC car, 100% RTR

500504170

€109.99

The Mercedes-Benz /8 series shaped everyday motoring in the late 1960s and 1970s, and this 1:87 Carson model captures that familiar saloon silhouette in a compact radio-controlled format. Finished in blue and supplied as a 100% RTR version, the miniature is set up for immediate use with 5 batteries included. Its 1:87 scale gives the model a notably small footprint, making controlled runs possible in spaces where larger RC cars would feel oversized. The classic 200/8 body shape brings a recognisable road-car character to each manoeuvre, while the compact format invites careful steering, short direction changes and neat placement on smooth indoor surfaces. With batteries already part of the set, the focus stays on the driving session itself rather than on sourcing the basic power supply first. Between runs, the blue finish and saloon proportions also make the model easy to place on a desk or shelf as part of a collection of compact vehicles. The combination of RTR convenience, included batteries and 1:87 scale makes this Mercedes Benz 200/8 a concise entry into small-format RC driving for hobbyists aged 14 years and up.  Warning! Not suitable for children under 14 years.

1:87 Mercedes Benz 200/8, RC car, 100% RTR
1:87 VW Beetle, RC car, 2.4 GHz RTR

RC models in 1:87 scale

1:87 VW Beetle, RC car, 2.4 GHz RTR

500504182

€104.99

The Volkswagen Beetle remains one of the most recognisable car shapes of the 20th century, and this 1:87 RC version translates that silhouette into a compact model built for active driving. At 50 mm long, 20 mm wide and 18 mm high, the Bahama blue Beetle combines miniature scale with fully controllable handling and a detailed body that carries the character of the original into H0 format. Its 2WD RWD layout works with a brushed motor to deliver balanced running behaviour, while the 10 g weight keeps the model light on the surface. The officially licensed Volkswagen design is matched with front and rear LEDs that define the car clearly as it moves through table layouts, floor circuits or display-style street scenes. The 100% RTR set includes a permanently installed 3.7 V 40 mAh Li-Ion battery, 4x AAA transmitter batteries and a storage case, so the driving setup is complete straight away. The 2-channel radio system supports controlled runs with a range of up to 50 m, making the Beetle suitable for compact slalom routes, desk-side driving and small indoor courses where accurate line changes matter. Age marking: 14 years. Charging takes place through the transmitter and keeps the model ready for regular sessions between laps.

1:87 VW Beetle, RC car, 2.4 GHz RTR
1:87 VW T1 Bus Van, RC car, car trailer

RC models in 1:87 scale

1:87 VW T1 Bus Van, RC car, car trailer

500504166

€114.99

The VW T1 became one of the most recognisable light commercial vehicles of the 1950s, and this 1:87 RC version brings that silhouette into a compact driving format with a matching car trailer. At 115 mm long, 28 mm wide and 21 mm high, the ready-to-run model fits neatly into small layouts while still carrying the bus profile, printed finish and illuminated front and rear lighting. The 2.4 GHz radio system gives stable control for 1-player operation, and the fully proportional setup allows measured inputs instead of simple on-off movement. With a weight of 18 g, the model stays light in hand and easy to place on shelves or in model scenes between runs. The included Li-Ion drive battery is rated at 3.7 V and 75 mAh, while 4 LR03 AAA transmitter batteries are also included in the set. Steering trim supports precise correction when the bus tracks slightly left or right, which is especially useful on narrow routes where the small turning circle can be used to full effect. The display case adds a clean way to store the bus and trailer between sessions or present them as part of a collection. On a desk, shelf layout or compact indoor course, the combination of trailer detail, proportional control and long 50-minute runtime creates a focused micro RC driving session with a strong model-railway scale presence.  Warning! Not suitable for children under 14 years.

1:87 VW T1 Bus Van, RC car, car trailer
1:87 VW T1 Kastenwagen Jägermeister, RC car

RC models in 1:87 scale

1:87 VW T1 Kastenwagen Jägermeister, RC car

500504180

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 Carson version translates that familiar panel van shape into a compact RC format with Jägermeister livery. At 50 mm long and 20 mm wide, the model brings authentic proportions, detailed printing and front and rear LED lighting to desks, shelves and small indoor driving spaces. Its fully proportional control system gives measured steering and speed response instead of simple on-off inputs. A steering trim function helps fine-tune straight running, while the very small turning radius suits narrow table courses and close obstacles. The 2.4 GHz radio system supports stable control, and the sensitive forward and reverse function makes low-speed corrections easier in confined spaces. A brushed motor and 2WD RWD layout shape the driving character, while the permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time. With a height of 19 mm and a weight of 16 g, the van stays easy to place and store between runs. The set includes a display case for storage, which also keeps the miniature body protected when the model is off the course. 4x AAA transmitter batteries are included, so the RTR format covers the essentials for immediate indoor driving.

1:87 VW T1 Kastenwagen Jägermeister, RC car
2.4GHz KR-242XT Receiver, 4-channel radio unit

RC receivers and accessories

2.4GHz KR-242XT Receiver, 4-channel radio unit

505021021

€74.99

The KR-242XT is a compact 2.4GHz 4-channel receiver made for hobby-grade RC installations where clean electronics packaging and dependable channel allocation matter. Its short-format design suits model layouts with limited installation space, while the 4-channel configuration leaves room for more than the core driving functions in compatible radio-controlled builds. Within an RC setup, the receiver acts as the link between transmitter commands and the vehicle's onboard electronics, making channel management a central part of the build. The KR-242XT is positioned for enthusiasts who work with detailed model configurations and need a receiver that fits neatly into tighter chassis sections. The 2.4GHz specification places it in the current standard for modern radio control systems, and the compact housing supports tidy cable runs around surrounding components. With an age marking of 14 Years, it sits clearly in the hobby segment rather than entry-level toy use. This format suits workshop upgrades, replacement installations, and fresh RC builds where the electronics package needs to stay compact. In a carefully planned chassis layout, a short receiver can make the difference between a crowded interior and a cleaner, more accessible arrangement.  Warning! Not suitable for children under 14 years.

2.4GHz KR-242XT Receiver, 4-channel radio unit
Cyber Copter IR 2Ch, RC helicopter, RTF

RC helicopters

Cyber Copter IR 2Ch, RC helicopter, RTF

500507191

€21.99

The Cyber Copter IR 2Ch brings compact helicopter flying into a ready-to-fly format with a modern grey fuselage and a focused control layout. At 230 mm long, 95 mm high and with a 190 mm rotor diameter, this RC helicopter stays compact enough for indoor sessions while reaching speeds of up to 10 km/h. Its flight system combines infrared control with 2 channels for clear directional input, and the integrated gyroscope helps keep movement steady once airborne. Fine tuning comes from individually adjustable left and right trim, allowing the flight path to be corrected to suit the room and the handling style. The switchable LED position lights are activated from the transmitter, making the model easier to track visually when the light drops at dusk. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime per charge, and the USB charger keeps charging straightforward between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8 Years

Cyber Copter IR 2Ch, RC helicopter, RTF
Italeri JAS-39D Gripen Twin Seater Model Kit

Military aeroplane models

Italeri JAS-39D Gripen Twin Seater Model Kit

510002664

€26.79

The Italeri JAS-39D Gripen Twin Seater model kit brings a modern Swedish fighter into 1:48 scale, combining the compact canard-delta silhouette with the extended 2-seat cockpit layout of the training variant. The subject entered service in the second half of the 1990s, and the finished aircraft carries the sharp lines, single engine exhaust and multirole character that define the Gripen family. This JAS-39D version was developed to meet advanced pilot training requirements while keeping essentially the same performance as the single-seat fighter. That background gives the build a clear technical identity, with a configuration linked not only to training duties but also to reconnaissance and ground-attack missions. The aircraft's aerodynamic design is noted for excellent maneuverability, and the full-size jet reached a maximum speed of Mach 2.0. The box image also identifies this release as a New Decals Edition, with a Super Decals sheet for 4 versions. Figures are not included. On the workbench, the 1:48 scale gives room to focus on painting, markings and the distinct proportions of the twin-seat canopy. Once completed, the model fits naturally into modern military aircraft collections, whether displayed as a Swedish air power subject or alongside other late 20th century combat aircraft. 14 years is the recommended age.  Warning! Not suitable for children under 14 years.

Italeri JAS-39D Gripen Twin Seater Model Kit
Italeri Mercedes-Benz Wrecker Truck Model 1:24

Model trucks

Italeri Mercedes-Benz Wrecker Truck Model 1:24

510093808

€76.99

The Italeri Mercedes-Benz Wrecker Truck Model 1:24 captures the distinctive recovery configuration developed from the Mercedes-Benz MB 2238 6x4 heavy-duty road truck. Instead of a standard haulage layout, this scale build focuses on the specialist wrecker conversion, with its rear-mounted crane and service body shaping the silhouette of a vehicle built to recover broken-down or accident-damaged heavy trucks. The full-size MB 2238 combined engine power with a solid chassis and suspension layout, and that mechanical foundation defines the character of this model. The recovery body adds numerous storage compartments for tools and towing equipment, giving the finished truck the purposeful look of a roadside support vehicle rather than a conventional transporter. In 1:24 scale, those details create a build with strong workshop presence and a clear link to long-distance heavy vehicle operations. The subject also stands out through its 6x4 configuration, a key part of the truck's weight distribution when handling demanding towing work. On the bench or in a collection of commercial vehicle subjects, the wrecker format brings a different visual rhythm from standard tractor units and cargo trucks. The crane, compartment layout and recovery role give the finished model a focused industrial identity that suits display alongside other classic heavy transport builds.  Warning! Not suitable for children under 14 years.

Italeri Mercedes-Benz Wrecker Truck Model 1:24
Italeri Reefer Trailer Model Kit 1:24 Scale

Trailers & accessories

Italeri Reefer Trailer Model Kit 1:24 Scale

510103904

€62.99

The Italeri Reefer Trailer model kit brings a latest-generation refrigerated semitrailer into 1:24 scale with a finished length of 58.7 cm and a distinctly European freight profile. The long box body, front-mounted refrigeration unit and triple-axle rear section create the look of a temperature-controlled trailer waiting at a loading dock or lined up with a tractor unit in a road transport display. This assembly kit is built around the detailing that gives a reefer its working identity. The chassis construction, underbody equipment and support-leg structure shape the trailer from the frame upward, while the new wheels update the running gear for a more current appearance. Large side graphics for NORD CARGO, route names including Barcelona, Castellon, Madrid, Malaga and Moerdijk, plus rear-door markings and registration options add a commercial fleet character drawn from European cold-chain transport. The finishing stage also includes paintwork and decal application, which gives the long side panels and rear doors their full visual impact. With 600 minutes assembly time, the build suits a slower bench session focused on alignment, painting and final decoration. Paints, cement and tools are required separately. Once completed, the 1:24 trailer works well as a standalone display subject or as part of a larger truck modelling scene with depot, warehouse or highway freight context.

Italeri Reefer Trailer Model Kit 1:24 Scale
MC-8 2.4GHz MX-F TR set, RC radio system

RC remote controls

MC-8 2.4GHz MX-F TR set, RC radio system

500501040

€104.99

The MC-8 2.4GHz MX-F TR set brings game-controller handling to an 8-channel RC radio system, combining the transmitter with the MR-8 micro receiver for compact installation in demanding model layouts. With the receiver measuring 27 x 28 x 15 mm, the set suits builds where available space matters as much as dependable multi-channel control. Its control layout goes beyond basic steering and throttle. The left and right 3D joysticks each include a push-button function, opening extra input options for assigned model functions. A Uni/Fut. connector system supports integration with compatible equipment, and the set is specified for use with TAMIYA MFC-01, MFC-02 and MFC-03 as well as DMD/MF units. The 2.4 GHz transmission standard supports modern radio operation for hobby models that need several functions managed from one handset. In workshop setups, scale trucks and function-rich RC builds can benefit from the extra channels for lighting, sound or special movements where the connected system supports them. 4 AAA batteries are required separately for operation, making the set ready to slot into existing hobby equipment with a straightforward power requirement.

MC-8 2.4GHz MX-F TR set, RC radio system
Others Mercedes 300 SL Model Car 1:8 Red Replica

Diecast model kits

Mercedes 300 SL Model Car 1:8 Red Replica

520010114

€1,049.99

The iXO Premium Collectables Mercedes 300 SL captures one of the most recognisable coupe silhouettes in motoring history as a 1:8 scale model in red. The long bonnet, rounded roofline and low body create a strong display presence, while the glossy finish and bright trim bring out the flowing shape seen on the original car. Across the body, the model reproduces hallmark Mercedes-Benz details such as the front grille star, chrome bumpers, side mouldings and the vent section behind the front wheel with its horizontal bars. Round headlamps, windscreen wipers, mirrors, window frames and period-style wheel covers add further definition to the exterior. Through the clear glazing, the beige interior remains visible and gives the cabin more depth than a closed, darkened shell. With 602 parts, the construction centres on recreating the car's proportions and trim rather than reducing the shape to a simplified toy-like form. Assembly is required, and the stated build time is 2100 minutes. That extended format suits a display-focused project in which the bodywork, cabin details and brightwork can be appreciated step by step. Once completed, the model works as a striking centrepiece on a shelf, in a study or alongside other classic vehicle replicas.  Warning! Not suitable for children under 14 years.

Mercedes 300 SL Model Car 1:8 Red Replica
Nano Racer Yacht 2.4G

RC yachts

Nano Racer Yacht 2.4G

500108057

€19.99

RC action on the water! With the Nano Racer Yacht, luxury RC fun on the water is realized. The ready-to-run yacht model delivers full driving fun right after unpacking and brief charging. It is controlled with a 2.4 GHz radio remote control and offers a range of up to 40 meters. Thanks to the safety shutdown, the propellers only work when the model is in contact with water. All RC components are water-resistant, making the yacht ideal for exciting action on the water. The set includes a LiPo battery and clear instructions for quick start-up. Compact, fast, and easy to control, the Nano Racer Yacht is a fun watercraft for hobby and play.

Nano Racer Yacht 2.4G
Nano Tyrann 230 Gyro, RC helicopter, 2CH IR

RC helicopters

Nano Tyrann 230 Gyro, RC helicopter, 2CH IR

500507155

€24.99

Compact dimensions and a coaxial rotor layout give the Nano Tyrann 230 Gyro a light, agile presence in indoor flight, while intelligent gyro electronics keep the model composed during lift-off, hovering and direction changes. At 225 mm long, 97 mm high and only 31 g in weight, this 2-channel RC helicopter brings controlled handling into a format that is easy to store and quick to prepare. The infrared control system focuses the flying experience on the core inputs, with left and right trim on the transmitter to correct the track when needed. A 3.7 V 130 mAh LiPo flight battery powers up to 8 minutes of flying time, and charging runs through the included USB cable. The rotor diameter of 180 mm gives the helicopter a balanced footprint for indoor rooms, where short climbs, hovering practice and careful turns can be repeated in a manageable space. The switchable LED adds a visible point at the nose during flight and can be controlled directly from the transmitter. The ready-to-fly set suits spontaneous sessions in living rooms, hobby spaces or other indoor areas where compact RC aircraft can be flown with precision. Age 12 years and up. Only suitable for indoor use.

Nano Tyrann 230 Gyro, RC helicopter, 2CH IR
Scalextric 1:32 TFATF Dodge Charger Dom Toretto

Cars

Scalextric 1:32 TFATF Dodge Charger Dom Toretto

560004573

€67.99

The Scalextric 1:32 TFATF Dodge Charger - Dom Toretto brings a recognisable Fast and Furious machine into slot racing with a compact scale that suits repeat laps, close duels and character-led grid lineups. The Dodge Charger body gives the car a strong screen-linked presence on the circuit, while the guided slot format keeps the action focused on throttle control, lane discipline and clean corner exits. As a 1:32 slot car, it fits naturally into layouts built around the same scale and supports side-by-side racing with other compatible models in the range. The TFATF designation ties the car directly to the Fast and Furious world named in the data, giving collectors and racers a specific vehicle identity rather than a generic muscle car shape. The Dom Toretto version adds a named character connection that strengthens themed race setups and display shelves. 14 Years is the stated age marking. On home circuits, the car suits short sprint sessions, repeated lap practice and head-to-head runs where the Dodge Charger silhouette stays easy to pick out through bends and on straights. Between races, the same 1:32 format also makes it a strong addition to a shelf lineup built around film cars and slot racing favourites.

Scalextric 1:32 TFATF Dodge Charger Dom Toretto
Scalextric Jaguar MK2 G. Williams Racing 1:32

Cars

Scalextric Jaguar MK2 G. Williams Racing 1:32

560004596

€59.99

Scalextric Jaguar MK2 G. Williams Racing brings a classic competition saloon into 1:32 scale, combining the long roofline, upright proportions, and period racing character that make the MK2 such a recognisable name on a slot layout. The compact scale suits home circuits where close racing, lane changes, and repeated lap running keep the car in constant view. The G. Williams Racing decoration gives this version a specific track identity rather than a generic road-car finish, which adds extra appeal for collectors who enjoy named racing subjects. At 1:32 scale, the car sits naturally alongside other vehicles in the same format, helping create a consistent field for display or race-day line-ups. The model is marked for ages 14 years and up, matching hobby use where handling, placement on the slot, and layout setup are part of the routine. On a shelf, the Jaguar MK2 shape brings a strong vintage racing presence through its saloon silhouette and competition livery. On the circuit, the same body style adds variety to mixed grids, whether the session focuses on classic touring themes or simply on running a distinctive car through repeated laps at home.

Scalextric Jaguar MK2 G. Williams Racing 1:32
Scalextric Nissan R34 Skyline 1:32 Car

Cars

Scalextric Nissan R34 Skyline 1:32 Car

560004674

€67.99

Scalextric Nissan R34 Skyline brings the 2Fast 2Furious theme into a 1:32 slot car format that suits both racing layouts and display shelves. The compact scale gives the car a familiar presence on track while keeping it easy to line up with other 1:32 vehicles in the same collection. The Nissan R34 Skyline name carries strong recognition among performance car fans, and that identity translates neatly into a model made for powered racing systems. As part of the powered vehicles and electric car accessories category, this car is intended to extend an existing setup rather than stand alone. The 14 Years age marking places it in a hobby-focused range, making it a fitting choice for older fans who build themed grids, compare liveries and rotate cars through regular sessions. The 1:32 format also helps when organising storage, planning race pairings and keeping a collection consistent across a slot layout. On the track, the film-linked styling gives each run a clear visual character, whether the car is joining a head-to-head race, filling a franchise-themed line-up or taking a place in a display cabinet between sessions. It also works well as an additional car for expanding a current Scalextric collection around recognisable road and screen icons.  Warning! Not suitable for children under 14 years.

Scalextric Nissan R34 Skyline 1:32 Car
Scalextric Porsche 963 Daytona 25 1:32 Car

Cars

Scalextric Porsche 963 Daytona 25 1:32 Car

560004653

€59.99

Scalextric Porsche 963 Daytona 25 captures a current endurance racing shape in a 1:32 slot car format, pairing the low, wide prototype profile with the JDC Miller MotorSports livery for a focused circuit presence. The Porsche 963 name and Daytona 25 race theme give the car a recognisable motorsport identity that reads clearly on the track as it moves through bends, chicanes and straights. The 1:32 scale keeps the car aligned with a widely used slot racing format, making it a natural fit within existing race line-ups and garage displays. Its modern prototype silhouette brings a different visual character from GT and touring entries, with a body shape defined by endurance-racing proportions rather than road-car cues. The named JDC Miller MotorSports decoration adds team-specific detail instead of a generic race finish, which helps each lane assignment and race order stay easy to follow during head-to-head sessions. Batteries are not included. With an age marking of 14 Years, this car sits in the older hobby category and suits collectors as well as regular home circuit use. It works well as a single addition to a current grid, as a themed Daytona entry for endurance-style running, or as part of a broader modern prototype line-up built around real race names and liveries.  Warning! Not suitable for children under 14 years.

Scalextric Porsche 963 Daytona 25 1:32 Car
Scalextric VW Golf MK1 1:32 Racing Car

Cars

Scalextric VW Golf MK1 1:32 Racing Car

560004625

€59.99

Scalextric VW Golf MK1 1:32 Racing Car brings Malcolm Jeffs Racing style into a compact slot car format that reads clearly on the track and on display. The 1:32 scale gives the body a balanced footprint for home racing layouts, while the VW Golf MK1 shape carries the crisp hatchback profile that made this model a familiar sight in touring-car circles. The product data states an age marking of 14 Years, placing this model within a hobby-led range rather than early-years play. Its named Malcolm Jeffs Racing livery gives the car a specific motorsport identity instead of a generic road-car finish, which helps it sit naturally alongside other competition-themed vehicles in a collection. As part of the powered vehicles category, it is designed for electric or battery car set use, and the compact scale makes it easy to combine with existing 1:32 slot racing scenes. The short designation focuses on a single real-world model and racing name, giving the car a clear collector angle as well as track appeal. Set on a home circuit, the VW Golf MK1 shape adds a recognisable silhouette through bends, straights and grid line-ups. Away from racing sessions, the Malcolm Jeffs Racing decoration and 1:32 proportions also suit shelf display with other classic motorsport subjects from the Scalextric range.  Warning! Not suitable for children under 14 years.

Scalextric VW Golf MK1 1:32 Racing Car
Scania T143 M500 Top Line 1:24 Model Kit

Model trucks

Scania T143 M500 Top Line 1:24 Model Kit

510000736

€62.99

The Italeri Scania T143 M500 Top Line captures a landmark heavy truck in 1:24 scale, translating the presence of the 1990s road icon into a detailed assembly kit. Its subject is the Scania 143 M500 Topline, a tractor unit known for combining long-distance capability with a high cab format that gave the vehicle its unmistakable road profile. The original truck was defined by a 500-horsepower V8 engine and a 16-speed transmission, and those specifications give this model much of its appeal as a technical replica. The Topline configuration is central to the look, with a high, spacious cabin that set this version apart within commercial transport. The source vehicle was also associated with an advanced braking system, air suspension, strong efficiency and substantial load capacity, placing it firmly in the world of heavy logistics. Assembly is required, and the stated build time is 600 minutes. The box contents list an assembly kit. On the workbench, the 1:24 format gives the truck a scale large enough to reward careful painting and finishing while keeping the build focused on a single classic tractor unit. Once completed, the model suits display settings that highlight cab shape, grille details and the character of a well-known European long-haul design. Minimum age: 14 years.  Warning! Not suitable for children under 14 years.

Scania T143 M500 Top Line 1:24 Model Kit
X4 Quadcopter Yairo, RC aircraft, 2.4 GHz RTF

- 16 %

RC quadcopters

X4 Quadcopter Yairo, RC aircraft, 2.4 GHz RTF

500507201
€35.99

€42.99

The X4 Quadcopter Yairo brings compact quadcopter flying together with illuminated detail and straightforward control in a ready-to-fly format. With a ring diameter of 150 mm, a height of 37 mm and a weight of 52 g, the model stays light and agile in the air while the three-colour LED setup gives each flight a vivid visual presence. Its electronically rotatable LED ring is controlled by the remote control, adding a moving light element that changes the look of the quadcopter during flight. The 3.7 V 500 mAh LiPo flight battery supplies up to 8 minutes of runtime, and the included USB charger keeps the setup simple between sessions. 4 frequency channels support responsive handling, while the compact dimensions make the model easy to carry to open indoor spaces or calm outdoor areas. The included LR06/AAA transmitter batteries mean the full set is ready for use straight from the contents provided. Short practice flights, evening hovering sessions and quick manoeuvre runs all suit this RC aircraft well. The 8+ age marking and 1-player format make it a focused flying model for learning control inputs, refining reactions and enjoying illuminated flights with a compact quadcopter layout.

X4 Quadcopter Yairo, RC aircraft, 2.4 GHz RTF
XS Deep Sea Dragon, RC submarine, 100%RTR

RC speed boats

XS Deep Sea Dragon, RC submarine, 100%RTR

500707117

€39.99

Compact RC submarines bring a different kind of model action, and the XS Deep Sea Dragon shifts that action below the surface. This 100%RTR RC submarine combines a compact orange hull, 3-channel 40 MHz control and blue LED illumination for visible manoeuvres in baths, pools and aquaria. The set includes the mini submarine with RC system, a 3.7 V 90 mAh Li-Ion drive battery, a USB charger, 2 transmitter batteries and instructions. Forward, backward, left and right steering are joined by dive and surface functions, so movement is not limited to a flat path across the water. The blue LEDs stay visible during operation and help keep the model in view while it changes depth. With up to 6 minutes of runtime, each charge suits short underwater runs with a clear start and finish. The USB charging cable can be stowed in the transmitter, so the charging lead stays with the control set between sessions. In use, the compact format suits smaller water spaces where tight turns and depth changes stay easy to follow. Age 8+ marks the recommended age. The submarine is intended for fresh water use in swimming pools, baths and aquaria; do not use in salt water.

XS Deep Sea Dragon, RC submarine, 100%RTR
1:10 KO RSx4S-one10X, servo, low profile

RC servos

1:10 KO RSx4S-one10X, servo, low profile

505030137

€124.99

The KO RSx4S-one10X is a 1:10 low-profile servo shaped for compact RC chassis where installation height and steering packaging need careful control. Its metal gear layout and the stated 11.8 V specification place it firmly in performance-focused electronics setups, giving model-building enthusiasts a concrete steering component for advanced builds. The low-profile housing suits layouts where body clearance, linkage position and surrounding electronics leave little spare room. In that context, the 0.10-second speed figure supports fast steering response when direction changes need to happen with little delay. The servo format also makes it relevant for 1:10 on-road and competition-style configurations that rely on tidy component placement rather than oversized hardware. As an electronic control component, it belongs in a build where the steering system, power supply and chassis geometry are chosen as a matched package. On the bench, the compact form helps when planning a clean electronics layout around the steering area. Once installed in a compatible 1:10 model, the combination of low-profile dimensions, metal gears and high-voltage operation supports focused tuning for precise handling response.  Warning! Not suitable for children under 14 years.

1:10 KO RSx4S-one10X, servo, low profile
1:10 Torque Beast, RC car, 2.4 GHz RTR

RC truggies & RC monster trucks

1:10 Torque Beast, RC car, 2.4 GHz RTR

500404358

€129.99

The 1:10 Torque Beast brings classic monster truck presence to RC driving with a 430 mm length, 310 mm width and 200 mm height that give the chassis a broad, purposeful footprint on rough ground. A solid bumper with integrated LED lighting adds a bright front-end detail, while water-resistant RC components and splash-proof electronics support running when the surface turns damp or dusty. At 1364 g, the model combines its size with a manageable overall weight that suits quick direction changes and repeated runs. The 7.4 V 1500 mAh Li-Ion drive battery is included, and the stated running time reaches 25 minutes before the pack heads back to the USB charger. The fully assembled RTR format keeps the focus on driving rather than setup, and the 2.4 GHz system supports stable control without the frequency crystals older RC systems required. Minimum age: 14 years. On gravel paths, compact dirt sections or uneven yard surfaces, the Torque Beast has the ground clearance and tire format to keep the run lively without losing control. Evening sessions gain extra character from the front LED lighting, and the included battery set means the truck is equipped for the first outing straight away.

1:10 Torque Beast, RC car, 2.4 GHz RTR
1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR

RC Crawler

1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR

500404315

€249.99

The 1:10 X-Crawlee Pro 3.0 brings crawler driving into a 43.5 cm format built for rough ground, with a 270 mm width, 235 mm height and a weight of 2280 g that gives the model a planted stance on the trail. Its 100% RTR setup puts the focus on driving from the first session, while the 2.4 GHz remote control system keeps control inputs clear and direct. Power comes from the included 7.2 V NiMH drive battery with 1800 mAh, charged via the included 7.2 V / 1 A USB charger. At full capacity, driving time reaches up to 70 minutes, giving longer runs across stones, dirt tracks and uneven paths without frequent charging breaks. The controller is compatible with NiMH and LiPo batteries, which broadens battery choice for later setup changes. Full ball bearings support efficient running through the drivetrain, while the suspended rigid axles give the crawler the axle movement needed for slow, technical sections. The ready-to-run set includes the model, the radio system, the drive battery, the USB charger, 4 AA transmitter batteries and the manual. With a 14 years+ age marking and a single-vehicle setup, the X-Crawlee Pro 3.0 suits focused crawling sessions where line choice, throttle control and steering precision shape every climb.  Warning! Not suitable for children under 14 years.

1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR
1:10 XS Tekuro, RC car, 4WD 100% RTR

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 4WD 100% RTR

500404360

€199.99

The 1:10 XS Tekuro brings fast off-road driving into a 410 x 300 x 175 mm format with permanent 4WD, a high-torque 550 brushed motor and a top speed of up to 40 km/h. Grey and green bodywork, 110 mm monster tyres and a raised stance give the model a strong trail-ready presence before the first run even starts. Its drivetrain is built around a central steel cardan shaft, reinforced steel drive shafts at the front and rear, and metal differentials with steel bevel gears on both axles. Ball-bearing mounting throughout supports efficient running, while the XT60 high-voltage plug system and quick-change battery holder simplify battery swaps between sessions. The 8 kg steering servo uses a metal gearbox and water-protected construction, matched with splash-protected electronics and a water-protected 2.4 GHz radio system. The included 2600 mAh 7.4 V Li-Ion battery supports about 15 minutes of driving time, and the complete RTR setup keeps preparation focused on charging and heading out. At 1741 g, the chassis has the planted feel needed for dirt paths, gravel sections and uneven ground. Tight turns, short bursts of acceleration and repeated launch attempts all suit the Tekuro's mix of traction, suspension travel and wheelie-ready rear setup.  Warning! Not suitable for children under 14 years.

1:10 XS Tekuro, RC car, 4WD 100% RTR
1:14 12V LED-PCB Taillight, model accessory

Electronics

1:14 12V LED-PCB Taillight, model accessory

500907388

€57.99

A 7-section taillight layout is a defining detail on many scale truck builds, and this 1:14 LED-PCB set brings that look into a compact 12V lighting accessory. The pair is designed as matching left and right boards, each marked L or R, creating a clear basis for symmetrical rear installation on a model vehicle. Each green PCB carries surface-mounted electronic components and preattached wiring, giving the lighting setup a tidy technical character once installed behind the rear light positions. The 5 attached leads on each board are colour coded in blue, black, yellow, red and white, which helps keep the wiring paths distinct during integration into an existing electrical layout. Mounting holes near the lower corners support fixed placement inside the body or light housing where a secure fit is needed. In workshop-style upgrade projects, the mirrored board design suits truck or trailer rear ends that need matching light units on both sides. The 12V specification makes the set suitable for model electrical systems built around that voltage, while the compact board format leaves room for careful routing and clean finishing in detailed 1:14 installations.

1:14 12V LED-PCB Taillight, model accessory
1:14 2-Axle Dump Semi-Trailer, trailer

Models & trailers

1:14 2-Axle Dump Semi-Trailer, trailer

500907312

€589.99

Built in 1:14 scale, this 2-axle dump semi-trailer brings the look of a full-size tipper into a model-building format with a rigid PVC body, a CNC-milled aluminum frame and a 4-wheel layout. The silver dump body, black chassis and raised front platform create the working profile of a road-going bulk trailer, whether coupled to a tractor unit or parked on its support legs. The assembly kit focuses on mechanical detail rather than simplified styling. Vertical body panel lines, mudguards, rear underrun protection and ladder elements give the trailer a technical finish, while the king pin can be adjusted to suit the setup. The chassis uses new axles with 8 mm lift, and the rear section is shaped around a mechanically unlocking tailgate for realistic unloading action when a tipping function is installed separately. 7-chamber taillights and dummy air spring details extend the scale appearance across the rear and underside, and the ball-bearing wheel setup supports smooth movement during handling. On a workshop shelf, in a truck yard scene or behind a matching 1:14 tractor, the semi-trailer adds a strong construction-transport theme with visible engineering throughout the frame and body. Assembly kit and manual are included. A spindle drive, motor, battery, switch, radio gear, a charger and paints are required separately for expanded functions and finishing.  Warning! Not suitable for children under 14 years.

1:14 2-Axle Dump Semi-Trailer, trailer
1:14 2-Axle Dump Trailer, trailer kit

Models & trailers

1:14 2-Axle Dump Trailer, trailer kit

500907425

€519.99

The 1:14 2-Axle Dump Trailer brings working tipper style into a scale truck setup with a tandem-axle layout, a gray rigid PVC dump body and a steel profile frame with laser-cut, laser-welded construction. Built as an assembly kit, it focuses on the mechanical character of a real dump trailer, from the drawbar and support leg to the rear gate area and underbody linkage. The chassis uses 8 ball bearings across the wheel setup, giving the running gear a more precise feel as the trailer rolls behind a compatible tractor unit. Fulda Variotonn wide offroad tyres and the trailer axle with air ride dummy push the model further toward commercial-vehicle realism, while the 7-section tail lights add a recognisable rear-end detail. The automatic back wall locking with 2-hook design gives the rear section a functional finish that matches the tipper concept. The support leg keeps the trailer upright when detached, and the drawbar with hitch eyelet completes the classic central-axle trailer layout seen in heavy haulage scenes. On the bench, the kit offers a focused build around frame, axle and body assembly. Once finished, the trailer suits construction, transport and unloading scenes in 1:14 scale layouts, whether parked as a standalone model or coupled into a larger truck combination. Age 14 Years. Spindle drive, gear box motor, a control switch and paints are required separately.  Warning! Not suitable for children under 14 years.

1:14 2-Axle Dump Trailer, trailer kit
1:14 2-Axle Material Trailer, trailer kit

Models & trailers

1:14 2-Axle Material Trailer, trailer kit

500907624

€574.99

Built for 1:14 truck scenes, the 2-Axle Material Trailer brings a long loading bed, twin-axle layout and working drop-side bodywork into a scale transport build with a clear commercial look. The grey panel sides, dark front bulkhead and wood-look floor give the trailer the character of a real material hauler, whether it is coupled behind a road tractor or parked at a loading point. The kit structure goes beyond a simple rolling chassis. The assembly sequence includes 2 axle units, a pivoted bogie, a main frame with crossmembers, mudguards, underride protection, rear bumper parts and upright posts around the bed. Ball bearings are fitted into each wheel hub, and the axle geometry offers normal height or a +8 mm position during assembly. Rear light housings are part of the build, and the manual also shows optional LED taillight boards as separate accessories. A spare wheel holder and additional fittings are listed as optional accessories rather than included contents. Once assembled, the trailer suits realistic loading and transport layouts in 1:14 scale, from building-material scenes to depot and yard setups. The opening side panels and rear section support a more active display style, while the detailed underframe, mudflaps and side protection parts give the finished trailer convincing presence from low viewing angles.  Warning! Not suitable for children under 14 years.

1:14 2-Axle Material Trailer, trailer kit
1:14 2-axle Riedler, stanchion trailer

Models & trailers

1:14 2-axle Riedler, stanchion trailer

500907622

€509.99

The 1:14 2-axle Riedler stanchion trailer brings timber-haul detail into a scale transport setup with a steel sandwich frame, solid aluminium stanchions and a long, purposeful silhouette. At 620 x 190 x 305 mm and 2,600 g, the trailer adds real presence to a model road train while reflecting the look of the full-size Riedler vehicle named in the licence. Its mainframe uses 3 mm and 1 mm sheet steel parts that are laser cut and CNC bent, and the bogie follows the same sandwich construction for a consistent mechanical layout. The mounted bogie is adjustable and uses sliding pads to support manoeuvring through tighter course sections. A one-piece drawbar in fibre-reinforced plastic carries a chequer plate application and is held at a coupling height of 75 mm by 2 springs. The semitrailer axle includes dummy pneumatic springs, while the left and right underride guards and the CNC-milled rear bumper add further metal detail. The stanchion holders can be loosened with 2 grub screws, then repositioned or removed to suit different loading arrangements for logs or other long cargo. Ball-bearing mounted chromium wheels with wide tyres, mudguard splash protection, bumper mud flaps, a licence plate holder and 7-compartment rear lights build up the finished transport character. A decoration set is included. Age 14 Years. The Carson towing coupling 500907182 is required separately for use on the TAMIYA Volvo FH16 tractor unit.  Warning! Not suitable for children under 14 years.

1:14 2-axle Riedler, stanchion trailer
1:14 2-Speed Shift Gearbox Compact, gearbox

Basic accessories

1:14 2-Speed Shift Gearbox Compact, gearbox

500907265

€199.99

A 2-speed transmission changes the character of a scale truck build, and this 1:14 Compact gearbox brings that function into a neatly machined aluminium unit. The compact housing gives the drivetrain a technical focal point while keeping the installation footprint suited to tighter chassis layouts. The assembly data points to use with the original Tamiya motor, so the gearbox is built around a clearly defined motor fitment rather than a vague universal claim. The housing uses a front circular mounting face with multiple screw points, creating a structured base for fastening into the model. A shaft coupling is secured with a 3 x 3 mm set screw, and the instructions specify gel-type thread lock on the marked fastening point for a firm mechanical connection. The motor plate is attached with 3 x 8 mm screws, and an assembly dimension of 11 is shown in the motor fitting step. An optional servo mount for the 2-speed function is referenced in the documentation. In a 1:14 road truck or working vehicle project, this gearbox suits builders who want the drivetrain to feel more like a scaled mechanical system rather than a simple direct drive layout. It also fits detailed upgrade builds where aluminium parts, visible fastening points and a dedicated shifting mechanism add workshop character to the chassis.

1:14 2-Speed Shift Gearbox Compact, gearbox
1:14 20Ft. Sea-Container, kit, trailer load

Models & trailers

1:14 20Ft. Sea-Container, kit, trailer load

500907335

€199.99

Freight containers shaped modern transport with a standardised form built for road, rail and port handling. This 1:14 20Ft. Sea-Container Kit brings that familiar cargo silhouette into a scale truck setup with a 432 mm length, 180 mm width and 185 mm height. The structure combines an anodised silver aluminium frame with plastic sheet body sections that reproduce the look of a traditional container. Corrugated surfaces, corner details and the separate frame layout give the model the character of a working freight load rather than a plain box shape. The plastic panels are paintable, which supports custom liveries, fleet styling or a weathered finish that matches a chosen tractor unit and trailer combination. At the rear, the doors are movable and fitted with a locking mechanism, so the handling detail is part of the build rather than only a visual effect. The container is designed for the 2 axle container semi-trailer 500907334 and locks to the chassis via twist-locks. That mounting method reflects the technical logic of full-size container transport and helps the model sit naturally in logistics, harbour or long-haul display scenes. 14 Years marks the recommended age.

1:14 20Ft. Sea-Container, kit, trailer load
1:14 20Ft. Semitrailer, trailer kit, tandem axle

Models & trailers

1:14 20Ft. Semitrailer, trailer kit, tandem axle

500907334

€274.99

Built around a 1:14 scale layout, the 20Ft. Semitrailer kit brings container transport style into a detailed truck setup with a black anodised aluminium frame and a compact tandem-axle format. The 475 mm long chassis creates a clear, purposeful silhouette behind a tractor unit, while the 180 mm width and 135 mm height keep the proportions aligned with scale road-haulage scenes. The running gear combines swing axle suspension with flat springs, giving the underframe a more technical, model-engineered character than a plain static trailer base. Tyres with foam inserts add substance to the wheel setup and support a fuller tyre shape on the rims. Mechanical seat posts strengthen the parked semitrailer look at the front section and add another visible chassis detail for display or workshop scenes. The open kit format also leaves room for a container-focused build concept rather than fixing the trailer to a single body style from the outset. Coupled to a matching truck, the semitrailer suits freight yard layouts, road transport displays and scale driving sessions built around container handling themes. A suitable lamp set, 300056502, is available for builders who want to extend the trailer with matching light equipment. Age 14 Years

1:14 20Ft. Semitrailer, trailer kit, tandem axle
1:14 3+1-section Trailer Taillight, model part

Basic accessories

1:14 3+1-section Trailer Taillight, model part

500907261

€15.99

A 3+1-section taillight layout is a familiar detail on working trailers, and this 1:14 scale set brings that look into model form with compact rear light components for truck and trailer builds. The combination of shaped housings and separate coloured inserts gives the rear end more structure than a printed or plain surface alone. Silver-grey moulded parts form the taillight bodies, while the transparent inserts add the distinct colour zones that define each section. The set includes paired components for a balanced rear installation, making it suitable for left and right placement on a trailer model. The small parts format suits careful detailing work, especially where scale realism depends on visible separation between housing and lens areas. On display, the layered construction creates a more technical finish; on a running model, it strengthens the road-vehicle character of the rear section. This accessory fits naturally into workshop sessions focused on upgrading a trailer body, refining a custom build, or replacing simplified rear details with a more defined light arrangement. The 14 years marking is stated for the set, matching its small-scale hobby character and detail-focused handling.

1:14 3+1-section Trailer Taillight, model part
1:14 3-Axle Flatbed Trailer III, trailer

Models & trailers

1:14 3-Axle Flatbed Trailer III, trailer

500907650

€539.99

Heavy transport takes shape in 1:14 scale with the 3-Axle Flatbed Trailer III, a detailed kit built to pair with TAMIYA tractors. The long platform, solid front wall and multi-axle layout give the model the look of a working road trailer ready for oversized loads, machinery or palletised cargo. The chassis uses a laser-cut steel frame in 3 mm and 1 mm material, supported by a massive aluminium front wall and steel underride protection on the left and right sides. A bumper made from 8 mm aluminium adds another strong visual and structural element at the rear. The loading area measures 981 mm in length, with an overall width of 195 mm and height of 210 mm, giving the trailer a notably long deck in this scale. At 4,400 g, the assembled model carries a substantial presence on display and in convoy scenes. The new trailer suspension can be built at normal height or with the included +8 mm elevation, adding flexibility to the finished stance. The real wood deck surface and recessed fastening points suit scale freight setups, from construction loads to industrial transport scenes. Ball-bearing wheels support smooth rolling movement, while the spare wheel mounted in its steel holder strengthens the authentic commercial-trailer look. Age 14+ marks the recommended age. The trailer can also be expanded with separately available accessories, including a conversion kit with functional aluminium side walls for building-material transport.

1:14 3-Axle Flatbed Trailer III, trailer
1:14 3-Axle Fliegl Megarunner, trailer kit

Models & trailers

1:14 3-Axle Fliegl Megarunner, trailer kit

500907235

€634.99

Curtain-side trailers shape the look of modern road freight, and the 1:14 3-Axle Fliegl Megarunner brings that transport character into a detailed model-building project. The assembly kit captures the long, low stance of a European semi-trailer with a 995 mm length, a 195 mm height and a red curtain body that stands out clearly beside the white front and rear sections. The build centres on a laser-cut steel frame, steel front wall and 3-axle layout, creating a technical structure with the layered detail that model-building enthusiasts look for in workshop sessions. Along the sides, the curtain body is tensioned with multiple fasteners, while the rear section uses opening doors with a 270° hinge layout for a more authentic trailer finish. Half-round mudguards, a single-arm steel spare wheel carrier and aluminium underride protection add the kind of hardware normally seen underneath full-size transport equipment. The rear bumper carries a laser-cut Fliegl logo, and the wide tyres with chromed rims complete the road-going stance with a bright contrast against the darker chassis parts. On a shelf, in a depot scene or coupled to a 1:14 tractor unit, the trailer adds a strong logistics presence through its triple-axle proportions and curtain-side bodywork. The kit format makes the construction itself part of the appeal, with the manual included for step-by-step assembly.  Warning! Not suitable for children under 14 years.

1:14 3-Axle Fliegl Megarunner, trailer kit
1:14 3-Axle Low Loader, trailer, gooseneck

Models & trailers

1:14 3-Axle Low Loader, trailer, gooseneck

500907700

€849.99

Heavy-haul trailers are defined by their proportions, and this 1:14 3-axle low loader captures that look with a long low-bed platform, a stepped gooseneck front section and a rear triple-axle group. The red frame, wood-look centre deck and black running strips create the technical contrast seen on full-size transport equipment, whether the trailer is coupled to a matching tractor unit or shown as a standalone workshop build. The construction goes beyond a simple shell. The manual shows 6 wheel assemblies with ball bearings, a multi-part frame with cross members in 74 mm and 81 mm lengths, and deck sections that lock into place across the chassis. Rear details such as warning boards, mudflaps, lights, hazard markings and LONG VEHICLE graphics build the road-going character of the model. The trailer also supports optional upgrades including a spindle drive gearbox motor, a control switch for the lifting mechanism, LED tail light boards, rectangular lights and an orange flashing beacon. On a finished 1:14 truck combination, the low central bed suits scale transport scenes with construction machines, agricultural vehicles or other oversized loads. The long deck and realistic rear section also make the model a strong centrepiece for shelf display, depot layouts and heavy-transport dioramas. Required separately are a gearbox motor for the lifting device and a control switch for manual lifting.  Warning! Not suitable for children under 14 years.

1:14 3-Axle Low Loader, trailer, gooseneck
1:14 3-Axle Semi-Trailer Ver.III, trailer

Models & trailers

1:14 3-Axle Semi-Trailer Ver.III, trailer

500907792

€689.99

The 1:14 3-Axle Semi-Trailer Ver.III recreates the long, enclosed form of a box trailer with a white body, red chassis and a detailed 3-axle layout that gives a truck combination a convincing road-going presence. Extended support legs at the front let the trailer stand detached, while the wide rear opening sets up loading scenes with the doors swung fully outward. Details across the chassis and body focus on the hardware that defines a working trailer. The side panels use a screwed sandwich-look construction, and the semi-circular mudguards frame the rear wheel area with a clean commercial-vehicle profile. At the back, an aluminum rear bumper carries 7-section taillights for a technical finish that matches the transport theme. A steel spare wheel holder with spare wheel adds another workshop-style detail to the underframe, and the manually adjustable aluminum trailer support legs underline the functional character of the model. Combined with a compatible 1:14 tractor unit, the trailer suits realistic freight setups, depot scenes and road-train display builds. Open rear doors, visible cargo space and the multi-axle chassis also make it a strong centrepiece for transport layouts focused on loading bays, yard parking and long-haul combinations. Age 14 years+  Warning! Not suitable for children under 14 years.

1:14 3-Axle Semi-Trailer Ver.III, trailer
1:14 3-Axle Stanchion Trailer, logging trailer

Models & trailers

1:14 3-Axle Stanchion Trailer, logging trailer

500907629

€599.99

Built around a 1:14 scale and a 3-axle layout, this stanchion trailer brings the look of a dedicated timber hauler into a detailed model format. The red chassis, silver stanchions and black fenders create the unmistakable profile of a forestry transport trailer, with the long frame set up to carry elongated loads such as logs or poles in a convincing road-going arrangement. The structure develops through a multi-stage build with 6 wheel assemblies, ball bearings in the wheel hubs and 3 axle units mounted beneath the frame. The suspension uses a new design, and the axle build includes a choice between normal height and a raised +8 mm position. Dummy air suspension details add another layer of scale realism around the running gear. Side underrun guards, a rear bumper, rear light details and a front holder with front plate shape the trailer into a complete heavy-transport subject rather than a simple rolling chassis. On the bench or coupled into a 1:14 truck setup, the trailer suits display scenes centered on forestry, construction or long-load transport. Support legs hold the trailer upright when parked, while the front bulkhead and paired stanchions define the loading zones clearly for a purposeful finished look.

1:14 3-Axle Stanchion Trailer, logging trailer
1:14 3-Chamber Taillight PCB, RC lighting set

RC truck accessories

1:14 3-Chamber Taillight PCB, RC lighting set

500907679

€80.99

Compact rear lighting adds a sharper scale finish to 1:14 vehicle builds, and this 3-chamber taillight PCB set brings that detail into a small round format. With dimensions of 11 x 7.5 mm, the units suit model bodies and rear sections where lighting needs to stay visually balanced instead of overpowering the build. The PCB layout combines 3 light functions in each taillight: rear light, indicator and brake light. That function mix supports more lifelike signalling on trucks, trailers and custom conversions, while the round housing shape fits classic rear-end styling on many commercial vehicle projects. The set is designed for an input voltage of 7.2-12 V DC, making it suitable for RC electrical systems within that range. For model-building enthusiasts, this adds a focused electronics upgrade that contributes visible function as well as scale character. Installed on a 1:14 rig, the taillights help complete the rear view during workshop builds, restoration-style projects or detailed road-going truck scenes. The set is not compatible with TAMIYA MFC-01/03, so it is best matched with other suitable lighting layouts and custom electronics setups.

1:14 3-Chamber Taillight PCB, RC lighting set
1:14 3Axle Trailer Chassis Ver.III, trailer

Models & trailers

1:14 3Axle Trailer Chassis Ver.III, trailer

500907730

€389.99

The 1:14 3Axle Trailer Chassis Ver.III captures the look of a heavy road trailer in a format shaped for model-building enthusiasts. Its laser-cut steel construction uses 3 mm and 1 mm sections, creating a rigid base chassis that suits custom builds and gives larger trailer bodies a defined structural foundation. The 3-axle layout brings the long proportions of a transport trailer into a scale setup that looks convincing behind a truck tractor. A new trailer suspension system is part of the chassis design, and the included +8 mm elevation option allows the running height to be adapted to the planned structure above. Wide chromed wheels with ball bearings and wide tyres underline the technical look while supporting smooth rolling movement. At the rear, an aluminium bumper with 7-section taillights adds another recognisable truck detail. The steel spare wheel holder with spare wheel extends the workshop-style equipment, while the semi-circular mudguards shape the wheel area with a clean trailer silhouette. As a basic trailer chassis for individual structures, this version leaves room for flatbed, transport or specialist body concepts built around the frame. On a shelf, in a workshop setting or coupled to a matching 1:14 tractor unit, the long red chassis and detailed under-run protection create a strong heavy-haul presence.

1:14 3Axle Trailer Chassis Ver.III, trailer
1:14 4-in-1 LED Distrib.Board, model accessory

RC truck accessories

1:14 4-in-1 LED Distrib.Board, model accessory

500907805

€9.99

Lighting details often define the final character of a scale build, and this 1:14 4-in-1 LED Distrib.Board is made to bring order to that stage of the setup. With 10 outputs on one board, it creates a central connection point for several LED positions within a 1:14 model and supports a tidier internal layout than separate loose branches. The board is designed as a model accessory in the Carson Modelsport range and focuses on the practical side of adding electronics to a build. Its 4-in-1 distribution concept helps separate and organise multiple light connections when a cab, body or chassis carries more than one lighting point. That makes it useful for projects where front, rear or additional marker lights need a defined place in the wiring plan. The compact board format also suits hobby work where available installation space inside a scale model is limited and every connection needs a clear route. In workshop use, the board fits naturally into the finishing phase of a 1:14 build or an upgrade of an existing model. Minimum age 14 years is stated for this accessory, matching hobby projects that combine scale detailing with electronic equipment.

1:14 4-in-1 LED Distrib.Board, model accessory
1:14 4-section Trailer Taillight, model accessory

Basic accessories

1:14 4-section Trailer Taillight, model accessory

500907262

€15.99

A 4-section taillight layout is a small detail with a strong effect on the look of a scale trailer, and this 1:14 set focuses exactly on that rear-end finish. The set is built around 2 taillight units and matching coloured inserts, giving model builders a clear route to a more defined lighting arrangement on compatible trailer projects. The parts shown for this accessory include red, orange and clear lens elements, allowing the different sections of the taillight to be represented with the right colour separation instead of a single uniform piece. The rectangular format and segmented front face suit the visual language commonly used on trailer rear assemblies in scale form. Because the set is dedicated to 1:14 use, it fits naturally into model scenes where proportions matter and small exterior details shape the overall impression. Age marking: 14 Years. On workshop builds, restoration tasks or visual upgrades, these taillights can be used to refresh an older trailer body or complete a new rear frame with a more convincing scale finish. They also suit hobby benches where body details, marker layouts and rear-end styling are handled with the same care as the main chassis and running gear.

1:14 4-section Trailer Taillight, model accessory
1:14 Air Horn-Set MB Actros, model accessory

Basic accessories

1:14 Air Horn-Set MB Actros, model accessory

500907161

€39.99

Air horns are a defining detail on many show trucks, and this 1:14 Air Horn-Set MB Actros brings that familiar look to a scale build with 2 trumpet-style horn units in chrome brass. The long tubes, flared bell openings and compact bracket mounts create a clean visual match for truck-focused detailing work. Each horn is shaped as a separate component, making the set suitable for adding roof-mounted or exterior trim accents to an MB Actros model in 1:14 scale. The chrome brass finish gives the parts a reflective metallic appearance that stands out against painted cab surfaces and other exterior fittings. Visible screw-mounted brackets beneath the horns provide defined attachment points, which helps keep placement precise during a custom build or restoration project. As a model accessory rather than a complete vehicle, the set focuses on visual realism through scale-correct form and material presence. On a shelf display, in a workshop scene or as part of a truck conversion, the horn pair adds a recognisable finishing touch to the upper bodywork. The set also suits replacement use when an existing build needs fresh exterior detailing for a more complete Actros look.

1:14 Air Horn-Set MB Actros, model accessory
1:14 Air Horn-Set, model accessory, brass

Basic accessories

1:14 Air Horn-Set, model accessory, brass

500907096

€29.49

Air horns are a defining visual cue on classic truck builds, and this 1:14 Air Horn-Set adds that detail with 2 clarions in different lengths. The set uses brass with a nickel-plated finish, creating a bright metallic look that suits scale cabs, roof bars and custom bodywork. The combination of 1 long and 1 short clarion opens up more authentic detailing than a matched pair alone, especially on builds that follow full-size truck styling. Brass gives the parts a precise formed shape, while the nickel-plated surface adds the chrome-style appearance often used for exterior trim. Mounting parts are included for fitting, and the drill template provides a practical guide for positioning the holes before installation. That makes the set useful both for fresh projects and for upgrading an existing 1:14 truck with a more finished exterior layout. On a shelf, the horn set sharpens the silhouette of the cab with a recognisable heavy-truck detail. In a workshop build, it adds a focused finishing step that complements paint, lighting and other scale accessories without changing the base character of the model.

1:14 Air Horn-Set, model accessory, brass
1:14 Air Suspension Bellow, spare part, hard

Basic accessories

1:14 Air Suspension Bellow, spare part, hard

500907358

€6.99

In 1:14 scale model work, the smallest suspension parts often decide how cleanly a repair or rebuild comes together. This Air Suspension Bellow set provides 2 hard bellows with dimensions of 20 x 18 mm for model applications that call for this exact format. The stated hard specification makes this pair suitable where a firmer component is needed within the suspension area, while the 20 x 18 mm size gives a concrete reference for fit planning before installation. As a dedicated spare part rather than a general accessory, the set is aimed at targeted maintenance, replacement work and parts matching in existing 1:14 model assemblies. The 2-piece format also supports jobs that require a matched pair instead of a single replacement. Whether the task is restoring a used chassis, replacing worn suspension elements or keeping key workshop spares on hand for future service, this set stays focused on one clearly defined function. For model-building enthusiasts, that kind of exact component choice helps keep repair work organised and scale-specific.

1:14 Air Suspension Bellow, spare part, hard
1:14 Air-suspen. bellow, model accessory

Basic accessories

1:14 Air-suspen. bellow, model accessory

500907357

€6.99

Air suspension details play a defining role in the look of a scale truck chassis, and this 1:14 air-suspen. bellow set adds that compact technical touch with 2 soft bellows sized at 20 x 18 mm. The pair is suited to model-building work where suspension areas need a matching replacement part or a scale-focused finishing element. The soft construction supports fitting on compatible assemblies where a more flexible part is required. With 2 matching bellows in the set, the format works well for axle or chassis detailing on 1:14 builds that use air suspension styling cues. The stated 20 x 18 mm size gives a concrete reference when comparing existing installed parts or planning a new layout around available mounting space. As a model supplies component, the set fits naturally into repair work, parts organisation and custom project preparation without taking up much room in the workshop. On an in-progress truck build, the bellows can be used to refine visible chassis sections with a more technical scale appearance. For maintenance or replacement work, the pair offers a straightforward way to swap worn compatible parts while keeping dimensions aligned with the rest of the assembly.

1:14 Air-suspen. bellow, model accessory
1:14 Alum. 2-Speed Transfer-gearbox, gearbox

Basic accessories

1:14 Alum. 2-Speed Transfer-gearbox, gearbox

500907266

€249.99

A 2-speed transfer gearbox is one of the defining mechanical elements in a scale truck drivetrain, and this 1:14 version brings that function into a compact aluminium assembly. The silver housing, black output couplers and visible hex fasteners create a technical look that fits naturally into detailed workshop-style builds. The gearbox uses a central housing with mounting flanges for installation into a matching chassis, while the shaft outputs connect rotational force onward through the drivetrain. The product data also identifies an automatic diff lock and self-locking function, adding a distinct mechanical characteristic to the unit. Separate hardware is supplied for fitting, including screws, a hex nut and coupling parts shown alongside the main assembly. An optional servo mount for 2-speed transfer gearbox is referenced in the documentation, indicating compatibility with a shifting setup where the wider build calls for it. In a 1:14 model project, this assembly suits builders working on scale commercial vehicles or other detailed RC driveline layouts. It works as a focused upgrade or replacement component where the drivetrain needs a dedicated transfer stage with compact metal construction and clearly defined mounting points.

1:14 Alum. 2-Speed Transfer-gearbox, gearbox
1:14 Alum. Cylinder mount GH, model part

Basic accessories

1:14 Alum. Cylinder mount GH, model part

500907476

€46.99

This 1:14 aluminium cylinder mount GH set brings machined metal hardware into detailed model work with a compact 2-piece mounting solution for compatible assemblies. The silver finish and precisely cut shapes give the parts a technical look that fits naturally into workshop-style rebuilds, upgrades and maintenance on scale vehicles. Each mount is formed as a fork-style bracket with several circular mounting holes, creating different attachment positions within the assembly. That layout supports careful placement of pins, pivots or linked components where alignment matters. The set is intended for model supplies use rather than as a standalone vehicle component, making it a practical choice when an existing build calls for replacement hardware or a metal alternative to standard fittings. The aluminium construction adds a crisp machined appearance, while the GH designation keeps the part identifiable within a parts-based setup. On the bench, the set suits hobby tasks such as refreshing worn mounting points, adapting a custom mechanical layout or preparing a scale model for further detailing. Age marking: 14 Years. Batteries are not included.  Warning! Not suitable for children under 14 years.

1:14 Alum. Cylinder mount GH, model part
1:14 Alum. Fr. wide wheel, wheel rims

Tyres & rims

1:14 Alum. Fr. wide wheel, wheel rims

500907412

€74.99

These 1:14 aluminium front wide wheel rims are built for model-building enthusiasts who want a more defined wheel setup on compatible RC vehicles. The 2-piece set uses a hex mount and is intended for the front axle, combining a technical fit with a machined metal look that suits detailed scale builds. The rim design shown here pairs a silver finish with oval ventilation-style cutouts, a black centre section and visible bolt detailing around the hub area. That combination gives the wheel face a purposeful appearance often sought for truck, crawler or workshop-style conversions. As replacement or upgrade parts, the rims can refresh a worn front end or shift the visual character of a build toward a more mechanical, scale-focused look. The 1:14 scale keeps the proportions in line with matching model platforms, while the wide format changes the visual presence at the front axle. On the bench, these rims suit rebuilds, parts swaps and detail-led custom projects where the wheel design matters as much as the body style. Age marking: 14 Years. No batteries required.

1:14 Alum. Fr. wide wheel, wheel rims
1:14 Alum. Low Loader, wheel set, twin-wheel

Tyres & rims

1:14 Alum. Low Loader, wheel set, twin-wheel

500907136

€50.99

Low loader trailers rely on their wheel setup for much of their character, and this 1:14 aluminium twin-wheel set brings that scale detail into focus with a distinctly technical look. The machined metal rims, grooved outer profile and separate hub caps create the kind of hardware-led finish that suits detailed trailer builds and replacement work alike. Each rim shows a deep recessed centre with circular bolt holes, giving the assembly a realistic mounting pattern and a purposeful visual depth. The twin-wheel configuration is shaped for low loader applications, where paired wheels are part of the recognisable trailer layout. The silver metal finish and grey centre caps create a clear contrast across the wheel face, so the hub area stands out cleanly once fitted. With 2 hub caps included, the set provides the centre-cover detail needed for a more complete axle appearance. In workshop use, the set suits fresh trailer projects, visual upgrades, or replacing worn wheel hardware on compatible 1:14 models. Age marking: 14 Years. The compact component format also makes it a practical choice when a build calls for scale-correct wheel detailing without changing the overall trailer concept.

1:14 Alum. Low Loader, wheel set, twin-wheel
1:14 Alum. Ramp hinge GH, model spare part

Basic accessories

1:14 Alum. Ramp hinge GH, model spare part

500907475

€30.99

In 1:14 scale builds, small hardware parts shape how moving sections sit and operate. The Alum. Ramp hinge GH supplies a compact metal hinge component for model assemblies that need a clean, defined pivot point on a ramp, flap or linked section. The part uses a long flat bar layout with 2 countersunk outer holes for screw mounting and a central double-lug section with circular through-holes for the mechanical connection. That geometry supports a flush fit at the mounting surface while leaving space for a pin, bolt or axle through the lower tabs. The silver aluminium construction and machined finish give the component a technical appearance that suits exposed installation on detailed truck or trailer builds. With 2 pieces included, matching left and right mounting positions or a direct replacement pair can be equipped in one pack. This spare part fits hobby work where worn hardware needs replacement or a custom model section calls for a compact hinge layout. On workshop benches and during rebuilds, the defined hole positions and simple bracket form support accurate integration into compatible 1:14 model projects.  Warning! Not suitable for children under 14 years.

1:14 Alum. Ramp hinge GH, model spare part
1:14 Alum. Rear wheel, model accessory, hex

Tyres & rims

1:14 Alum. Rear wheel, model accessory, hex

500907352

€114.99

A 1:14 scale wheel upgrade changes the whole stance of a model, and this aluminium rear wheel set brings that effect straight to the axle area with a bright metal finish and a distinctly technical look. The long-hole design and hex layout give custom truck or trailer projects a more defined rear wheel section with visible machined detail. The set is built around 2 rear wheels and is intended as a model accessory rather than a complete vehicle. The aluminium construction adds a solid metal appearance that suits workshop builds, display-focused projects, and scale conversions where the wheel area needs more visual depth. The rear wheel format concentrates the detailing where twin or dedicated rear axle setups draw the eye most strongly. The shaped openings create a purposeful rim face, while the separate hex components support installation on compatible model axles. Age marking: 14 Years. On a shelf, in a diorama, or as part of an RC truck rebuild, these wheel parts shift the look from standard running gear toward a more customised scale finish. They also suit enthusiasts refining an existing 1:14 chassis with more prominent metal wheel detail at the rear.

1:14 Alum. Rear wheel, model accessory, hex
1:14 Alum. Trailer Bumper Rear, trailer part

Basic accessories

1:14 Alum. Trailer Bumper Rear, trailer part

500907361

€24.99

A rear bumper is one of the details that gives a scale trailer its finished outline, and this 1:14 aluminium version brings that technical look to the back end of the model. The set is designed as a trailer accessory and uses 2 metal components with a long, straight form for a clean, purposeful rear section. The assembly combines a flat mounting plate with a shaped channel piece, creating a structured layout rather than a single strip. Several pre-drilled fixing points are worked into the aluminium parts, including round holes and elongated slots. That hole pattern supports aligned mounting and leaves room for positional adjustment during fitting. The silver-coloured metal surface suits workshop-style trailer builds and blends naturally with other scale hardware on 1:14 assemblies. In a detailed truck and trailer project, the rear section often defines the final visual impression as strongly as the side rails or chassis details. This accessory fits that stage of the build with a compact, model-focused part that adds a crisp mechanical finish to the trailer end. The 14 Years age marking is stated in the product data.

1:14 Alum. Trailer Bumper Rear, trailer part
1:14 Alum. Trailer Coupling SAF, model accessory

Basic accessories

1:14 Alum. Trailer Coupling SAF, model accessory

500907155

€99.99

Commercial trailers rely on a secure fifth-wheel connection, and this 1:14 Alum. Trailer Coupling SAF brings that characteristic detail into a truck model with a compact metal assembly and a distinctly technical layout. The aluminium construction, twin mounting rails and central coupling section create the look of a working rear chassis area that stands out on a workshop bench or in a finished road-haulage display. The assembly is shaped for installation on a compatible 1:14 model frame, with elongated mounting sections and fixing holes that support careful positioning within the chassis. Black contact pads on the upper section add visual contrast to the silver metal finish, while the central locking area gives the part the appearance of a realistic trailer interface. In detailed truck projects, components like the coupling help define the character of the rear platform, especially when the frame, mudguards and running gear are already in place. The SAF styling adds a recognisable commercial-vehicle reference without overwhelming the rest of the build. On a shelf, in a diorama or as part of a working truck conversion, the coupling adds a focused scale detail that strengthens the overall impression of the model. Age 14 Years. For model-building enthusiasts, it brings an authentic truck element into the chassis and supports a more complete heavy-haul scene.

1:14 Alum. Trailer Coupling SAF, model accessory
1:14 Alum. Transfer-gearbox Tipper 6x6, gearbox

Basic accessories

1:14 Alum. Transfer-gearbox Tipper 6x6, gearbox

500907610

€169.99

A 6x6 truck layout depends on a drivetrain that can pass power cleanly through more than one axle line, and this 1:14 Alum. Transfer-gearbox Tipper 6x6 is built around exactly that task. The aluminium construction and transfer-gearbox format place it firmly in the technical side of scale model building, where mechanical function shapes the whole vehicle concept. The unit is intended for 1:14 scale use and belongs to the models supplies category, making it a focused choice for builders working on truck driveline systems rather than body accessories or decorative parts. Its transfer-gearbox design indicates a central role between the incoming drive and the connected axle shafts. The compact casing combines a formed housing with mounting points for installation into a chassis layout. The visible shaft connections support integration with rotating driveline parts in a multi-axle configuration. In workshop use, this component fits projects that need a replacement gearbox, a custom 6x6 conversion, or a more detailed truck transmission layout. Age 14 Years. It suits hobby builds where the mechanical structure remains visible in the planning stage and where each drivetrain part contributes to a realistic scale engineering setup.

1:14 Alum. Transfer-gearbox Tipper 6x6, gearbox
1:14 Alum. Underrun Protection, truck accessory

Basic accessories

1:14 Alum. Underrun Protection, truck accessory

500907181

€34.49

On full-size trucks, underrun protection is part of the functional rear structure, and in 1:14 scale it adds the same purposeful finish to a detailed model. This aluminium underrun protection is made for 1:14 truck projects and brings a clear commercial-vehicle character to the rear section. The assembly combines a long metal crossbar with 2 angled bracket sections, creating a defined structural part rather than a loose collection of fittings. The mirrored bracket plates feature several drilled holes for fastening, which supports accurate positioning during installation on a compatible model. The aluminium construction gives the part a crisp technical appearance that suits scale truck builds with exposed chassis details and visible rear equipment. As a dedicated accessory in the Models & Accessories range, it also fits naturally into restoration work where worn or missing rear hardware needs replacement. In workshop-style build sessions, the part can be used to refine a custom truck layout or restore a model to a more complete rear-end setup. It also adds a more convincing finish in display settings where the frame, rear cross area and underbody details remain visible from low viewing angles.

1:14 Alum. Underrun Protection, truck accessory
1:14 Aluminium Front Wheel Hubs, Model Part

Tyres & rims

1:14 Aluminium Front Wheel Hubs, Model Part

500907278

€74.99

Built for 1:14 model applications, these aluminium front wheel hubs bring a focused replacement part into the running gear where fit and connection matter most. The set contains 2 round hubs with a hex design, intended for the front wheel area and shaped for wide wheel layouts. The aluminium construction gives this component a clear mechanical role within the axle assembly, while the round hub form and hex interface define how the wheel mount connects into the drivetrain area. As a pair, the hubs suit maintenance work when existing parts show wear or when a front axle setup is being refreshed with matching replacement components. The wide wheel specification points to a broader hub profile, which matters where the chassis layout depends on the correct wheel seating and axle geometry. In workshop use, these hubs fit naturally into repair benches, parts boxes and ongoing rebuild projects for 1:14 vehicles. They also suit routine servicing where the front axle hardware needs a like-for-like exchange rather than a general universal part.

1:14 Aluminium Front Wheel Hubs, Model Part
1:14 Aluminum Warning Sign, model accessory

Basic accessories

1:14 Aluminum Warning Sign, model accessory

500907448

€29.99

High-visibility warning panels are a familiar sight on transport and service vehicles, and this 1:14 accessory brings that look into model form with a compact aluminum warning sign and matching striped decal. The red and white diagonal marking gives scale builds a recognisable rear detail that fits utility, haulage, and work-focused scenes. The aluminum parts shown for the set include 2 mirrored mounting brackets, each with a long slotted arm and a plate section for fastening. That slot shape allows the position to be adjusted during fitting, which helps when lining the sign up with bodywork or another mounting point on the model. The decal carries the classic diagonal stripe pattern used for warning visibility, adding a crisp graphic finish once applied. Together, the metal brackets and decal create a small but distinctive scale detail that changes the character of a build from plain bodywork to a more purpose-led vehicle setup. On a shelf, in a workshop scene, or as part of a running model with service-vehicle styling, the sign adds a clear finishing touch without dominating the rest of the build. The 1:14 scale keeps it in proportion for matching model projects, and the separate bracket pieces support a neat left and right installation layout.

1:14 Aluminum Warning Sign, model accessory
1:14 Angle Eyes Hella, model lights, white

Electronics

1:14 Angle Eyes Hella, model lights, white

500907574

€52.99

Auxiliary lamps are a small detail with a big effect on a scale truck, and this 1:14 Angle Eyes Hella set brings that workshop-style finishing touch in a compact 2-piece format. The round lamps combine a white light look with chrome-look housings and separate mounting brackets, creating a front-end accent that fits naturally into detailed vehicle builds. The set is specified for 7.2 V and 12 V systems, with long black cables attached to each lamp for wired installation. That layout supports clean routing through the body or chassis area and leaves room for custom placement where the lighting concept of the model needs it. The round shape, reflective finish and bracketed base suit classic auxiliary-light positions such as bumpers, roof sections or other scale mounting points supported by the build. As a matched pair, the lamps help maintain a consistent left and right layout instead of mixing different light styles across the vehicle. In a workshop build, show truck project or detailed shelf model, these lamps add a recognisable Hella-style visual cue without changing the overall character of the vehicle. The 1:14 scale focus keeps the proportions aligned with larger truck models, while the wired format gives hobbyists scope to integrate lighting as part of a more individual setup.

1:14 Angle Eyes Hella, model lights, white
1:14 Angle Eyes LED PCB, model accessory

Electronics

1:14 Angle Eyes LED PCB, model accessory

500907555

€34.49

Angle Eyes lighting is a familiar styling cue in full-size vehicle culture, and this 1:14 LED set translates that look into a compact model-building format. The white SMD LED PCB is designed for 7.2 V and 12 V systems and brings a defined illuminated ring effect to compatible scale vehicle front ends. The set is built around compact light modules, fine connection cables and mounting parts shown in the included contents. That layout supports installation in tight body sections where larger lighting components would take up too much space. In a 1:14 build, the small-format PCB helps add lighting detail without overwhelming the proportions of the model. The white LED output suits headlamp styling with a clear, technical look, while the wiring layout supports connection into an existing compatible electrical setup. Mounted behind the front light area, the LEDs add a more defined visual signature when the model is on display, on a shelf, or integrated into a running vehicle project. Age marking: 14 years and up. A compatible model and a suitable power connection are required separately.

1:14 Angle Eyes LED PCB, model accessory
1:14 Angle Eyes, LED set, blue SMD PCB

Electronics

1:14 Angle Eyes, LED set, blue SMD PCB

500907554

€34.49

Blue Angle Eyes lighting brings a sharper custom look to 1:14 scale vehicle builds, with SMD LED PCB technology designed for operation on 7.2 V or 12 V systems. The set is aimed at model-building enthusiasts who want to add a clear lighting accent to a compatible project and extend the visual detail of the front end beyond the standard body finish. The compact electronic layout suits installations where space is limited around the body shell or light area, and the wired modules support placement within a scale build without dominating the visible structure. Blue illumination creates a defined styling effect that stands out in workshop displays, shelf presentation, or running sessions under lower ambient light. As a dedicated accessory from the models and accessories range, the set fits naturally into hobby projects that combine body detailing, electronics, and scale-focused finishing work. Age 14 Years. In a truck or other 1:14 model project, the lighting can be used to refine a custom road setup, add a more technical visual signature, or support a display-focused build with extra electronic detail. The set also works well for enthusiasts planning a fresh rebuild or updating an existing compatible model with a new lighting element.

1:14 Angle Eyes, LED set, blue SMD PCB
1:14 Angle Eyes, model light set, 7.2/12V

Electronics

1:14 Angle Eyes, model light set, 7.2/12V

500907573

€52.99

Angle Eyes lighting brings a sharper front-end signature to 1:14 model builds, with 2 round lamps designed for 7.2 V and 12 V operation. The white light effect suits scale truck projects that need a clear visual accent at the front, while the Hella-style form gives the setup a recognisable workshop and road-going look. Each lamp is connected by cable, which supports custom installation on bumpers, roof bars or other mounting points where extra lighting detail is wanted. The round housings keep the appearance consistent across both sides of the model, and the 2-piece format helps create a balanced layout rather than a single offset light source. On display shelves, in workshop scenes or during driving sessions, the lighting set adds a more technical finish to the bodywork without changing the core character of the build. The set suits hobby projects for ages 14 years and up and works well where scale detailing matters as much as driving action. Whether fitted to a road truck, a show build or a custom conversion, these lamps add a compact lighting element that strengthens the model's presence through shape, wiring and light effect.

1:14 Angle Eyes, model light set, 7.2/12V
120 of 1441 Items