Carson RC

Carson

Carson 1:10 Mega Duster Bundle

Product bundle consisting of: 1:10 Mega Duster 3.0 2.4G 100% RTR / 7,4V/2600mAh LiION batt. FE-Line XHP/TAM   Article number: 500404292 Product: 1:10 Mega Duster 3.0 2.4G 100% RTR Powerful racer for off-road action: The Carson FE Mega Duster 3.0 doesn't stop at any terrain! The independent suspension, full suspension and extremely grippy high-grip off-road tires make the vehicle ideal for unpaved terrain. The Mega Duster is ready to run and equipped with 1x 2.4 GHz remote control system, 2x Li-Ion drive battery (7.4 V/1500 mAh), 1x USB charger, 4x LR06 / AA transmitter batteries and detailed instructions. Fully charged and at full capacity, a full 25 minutes of driving time is possible. The LED lighting, digitally proportional control and waterproof RC components complete the overall package and make the model appear not only high-quality but also easy to handle. Under ideal conditions, the vehicle can reach top speeds of up to 30 km/h. Included: Fully assembled model, 2.4 GHz RC system, LiIon powerpack 7,4 V / 1500 mAh, charger, transmitter batteries, manual.     Article number: 500608307 Product: 7,4V/2600mAh LiION batt. FE-Line XHP/TAM Experience Maximum Power with Our 2600 mAh Li-Ion Tuning Battery! With 7.4 volts of output and a Tamiya connector, it delivers extended run time and is the perfect choice for the FE line. Get the performance boost you’ve been looking for – now!  

RC truggies & RC monster trucks

1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR

The 1:10 Mega Duster 3.0 brings pick-up truck styling, LED lighting and a fully assembled RTR setup into a 430 mm off-road RC car built for rough ground. With independent suspension, coilover shocks and a fully suspended layout, the chassis is set up to absorb uneven surfaces while the multi-coloured printed body keeps the truck's desert-racer look clear in motion. Its 2.4 GHz radio system uses digital proportional control, so steering and throttle inputs can be fed in with fine adjustment rather than simple on-off commands. The included Li-Ion drive battery is rated at 7.4 V and 1500 mAh, and the USB charger is part of the set, along with 4 AA transmitter batteries. At 310 mm wide and 200 mm high, the truck carries a broad monster-truck footprint, while the stated weight of 1364 g supports a planted feel over gravel and dirt. Splash-proof electronics expand the running window when the surface is dusty or damp, and the stated driving time reaches up to 25 minutes. The Mega Duster 3.0 suits open ground, compacted trails and loose stone where the 115 mm all-terrain tires can work for grip and control. Age 14+ is stated for this model, and the fully assembled format gets the focus quickly onto driving lines, throttle control and off-road handling rather than workshop time.  Warning! Not suitable for children under 14 years.

RC cars

1:32 Deemon X, RC buggy, 100% RTR 2WD

€29.99

Compact scale and lively handling give the 1:32 Deemon X the feel of a true off-road RC buggy in a format built for quick runs at home or on small garden tracks. The 2WD layout, 2.4 GHz remote control system and selectable speed levels create a clear, responsive driving setup, while the elaborately printed body shell and switchable LED lighting keep the model visually sharp in motion. At 115 mm long, 86 mm wide and 53 mm high, the buggy fits neatly into tabletop courses, improvised obstacle lines and tighter turns where larger vehicles need more room. The 3.7 V 100 mAh LiPo drive battery supports up to 15 minutes of driving time, and recharging happens via the included USB charger. Included pylons and the jump ramp add concrete course elements for slalom sections, launch points and repeatable stunt practice rather than simple straight-line driving. The 69 g weight keeps the model nimble when changing direction, and the rubber tires give the chassis the grip needed for uneven surfaces. Short sessions on indoor floors, hallway tracks or paved garden paths suit the Deemon X especially well, whether the focus is clean cornering, quick acceleration bursts or ramp jumps. With 2 speed settings and a complete RTR package, the buggy moves easily between first RC laps and fast, compact course driving

Models & trailers

1:12 MB Unimog U300 THW, RC truck, 100% RTR

The Unimog line became known for compact dimensions, portal-axle capability and utility work across rough terrain, and that character carries into this 1:12 MB Unimog U300 THW RC truck. In blue THW livery, the model combines a 450 mm body length with a powerful electric motor, front LED lighting and a 2.4 GHz control system for controlled driving on paths, gravel and other uneven ground. Its 220 mm width and 260 mm height give the truck a tall, purposeful stance that suits the U300 shape, while the 2052 g weight adds substance in motion. The remote control handles steering and throttle proportionally, so small stick inputs translate into finer changes than simple on or off control. A separate horn function can be triggered from the transmitter, and motor sound control adds another layer to the driving scene. The 7.4 V 850 mAh Li-Ion drive battery is included, and the RTR setup also includes the 2.4 GHz transmitter, a USB charger and transmitter batteries. That combination suits first runs in the hobby as well as relaxed utility-style driving sessions with a scale vehicle theme. On compacted dirt, paving or loose gravel, the THW truck can be guided through tighter turns, short climbs and stop-start route changes while the illuminated front end keeps the model visually defined.

RC cars

1:10 Dustor, RC car, 2.4 GHz 100% RTR

€69.99

The 1:10 Dustor brings full-size RC presence to first runs and casual off-road sessions, with a 540 mm length, 300 mm width and 240 mm height that give the model a broad, planted stance on mixed surfaces. A brushed motor drives the 2WD rear-wheel-drive layout to speeds of up to 20 km/h, while the 2.4 GHz radio system reaches up to 75 m for clear control across open ground. Its fully assembled format keeps the focus on driving, and the included 7.4 V 500 mAh Li-Ion battery works with the USB charger for straightforward turnaround between sessions. At 985 g, the chassis stays light enough for responsive direction changes while still carrying the visual weight expected from a 1:10 off-road model. Front and rear impact protection support everyday running where gravel edges, kerbs and clipped markers are part of the route. The included transmitter is powered by 2 x LR06 AA batteries, so the full set is prepared for use without extra radio equipment. On asphalt, compacted paths or light terrain, the combination of suspension travel, rear-drive handling and off-road tires creates a controlled, approachable driving character. With up to 30 minutes of running time per charge, the Dustor suits park runs, open-yard driving and repeated practice laps where longer sessions matter.

RC tractors

1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer

€99.99

The DEUTZ-FAHR 8280 TTV brings the look of a modern farm tractor into 1:16 scale with a matching trailer, 2.4 GHz radio control and working sound functions. Engine sound, horn and LED front lighting create a more lifelike driving scene, whether the tractor is rolling across loose soil, garden paths or a carefully arranged display setup. At 750 mm long, 180 mm wide and 234 mm high, the model has a substantial footprint that suits towing and transport play. The rigid axle supports off-road running, while the steering is tuned for precise control and a small turning radius, helping the tractor change direction cleanly and guide the trailer through tighter spaces. The officially licensed DEUTZ-FAHR styling carries the 8280 TTV identity into the bodywork, giving the model a recognisable agricultural character. The accessible battery compartment under the hood allows quick battery changes between runs. Included are the ready-to-run tractor with trailer, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR03 AAA transmitter batteries. With a weight of 1731 g and a driving time of 90 minutes, the set is equipped for extended driving sessions focused on towing, positioning and farm-style transport action.

RC lorries & RC trucks

1:20 MB Arocs Goldhofer, RC truck, 100% RTR

€109.99

Heavy-haul transport is a defining part of construction logistics, and the 1:20 MB Arocs Goldhofer brings that role into RC form with a 1000 mm long truck and low loader combination. The fully assembled RTR set combines remote-controlled driving with functional trailer handling, creating a model that looks at home moving machinery between workshop shelf and jobsite scene. At 155 mm wide and 185 mm high, the model carries the long, low stance of a transporter, while the 1350 g weight gives the combination a substantial feel in hand. The installed reversing light works automatically together with the tractor unit, adding a realistic response during manoeuvres without needing a separate command. Included in the set are the ready-to-run model, a 2.4 GHz RC system, 2 x 4.8 V NiMH batteries, a USB charger and 2 x AA transmitter batteries. The 30 minute driving time supports extended loading runs, repositioning moves and repeated coupling sequences. Minimum age: 8 years. The low-bed layout suits transport scenes with construction machinery or other scale loads, and the remote-controlled ramp and support add movement beyond simple forward driving. On a floor layout, workshop setup or construction-themed display, the MB Arocs Goldhofer turns loading, uncoupling and trailer positioning into the central part of the action.

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage RC car

€17.99

The Aston Martin V12 Vantage brings a well-known British sports car shape into a compact 1:60 Nano Racer format with radio control and a red body that stands out clearly on small driving layouts. Its officially licensed appearance follows the full-size model closely, while the 79 mm length, 33 mm width and 22 mm height keep the car suited to short straights, table-edge turns and quick direction changes in limited space. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The controller works on 2.4 GHz and reaches up to 15 m, giving the car enough room for indoor laps and compact obstacle courses. The same control system allows up to 50 vehicles to run simultaneously, which opens the door to group sessions without frequency clashes. With a weight of 25 g, the small chassis stays easy to handle between runs, and the battery delivers up to 10 minutes of driving time per charge. On a living room floor, a desk track or a small race setup, the Nano Racer format turns narrow spaces into usable circuits. Short driving sessions, quick charging through the controller and the compact footprint make this RC car a neat choice for spontaneous races, collecting and casual practice runs.

Mini RC cars

1:60 Nano Racer Fo.Must.ShelbyGT500, RC car

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle car presence, and this 1:60 Nano Racer translates that character into a compact RC format. At 79 mm long, 33 mm wide and 22 mm high, the miniature car stays small enough for quick driving sessions on tables, smooth floors or improvised indoor courses while still carrying the licensed Ford look. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The 2.4 GHz radio system gives the car responsive control and allows up to 50 vehicles to run simultaneously, which suits group races without frequency clashes. A 15 m control range leaves room for short sprints, turns and head-to-head runs, while the 25 g weight keeps the handling light and agile. The remote control also serves as the charging point, so the battery can be charged directly through the controller. With up to 10 minutes driving time, the Nano Racer fits quick race breaks, compact home circuits and repeated short sessions where several cars share the same space. The small footprint and simple control layout also make it easy to set up spontaneous races whenever a smooth surface is available.

RC buggys

1:8 Drakuro BL 3S, RC car, 4WD RTR

€299.99

The 1:8 Drakuro BL 3S RTR brings brushless power, long-travel suspension and a wide 370 mm stance into one large-scale RC car built for fast off-road running. At 500 mm long, 330 mm high and 3402 g in weight, the chassis carries real presence on dirt tracks, gravel stretches and open ground, with a top speed of up to 65 km/h. A longitudinal aluminum reinforcement brace adds rigidity through the centre of the chassis, and reinforced steel drive shafts at the front and rear transfer power under load. The waterproof 30 kg steering servo uses metal gears for direct steering input, while splash-proof electronics and housing support running in changing conditions. Height-adjustable body mounts make it easier to set the shell position cleanly over the chassis, and LED lighting at the front, rear and roof keeps the model clearly defined when the light drops. The XT90 high-current connector system is designed for low-loss power transmission within the drive setup. The ready-to-run package includes a 2.4 GHz remote control and instructions, so the focus stays on driving rather than sourcing the core control gear. With 14 Years marked in the data, the Drakuro suits high-speed bashing sessions, repeated acceleration runs and broad off-road lines where suspension travel, steering force and chassis size all come into play.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B 200/8, RC car, 100% RTR trailer

€114.99

The Mercedes-Benz /8 series shaped everyday road traffic in the late 1960s and 1970s, and this 1:87 M-B 200/8 captures that classic saloon presence in a compact RC format. The green body and matching trailer combine a recognisable road-car silhouette with radio-controlled movement, creating a small-scale setup that carries both collector appeal and active driving use. Its 1:87 scale makes the model easy to place on a desk, shelf, or layout, while the trailer adds a second element that changes the overall scene and gives the combination a more complete towing look. The 100% RTR specification means the driving package is prepared for immediate use, and 5 included batteries cover the initial power requirement stated in the data. With a minimum age marking of 14 years, the model sits in a hobby-focused range rather than a preschool toy segment. The compact format also suits short driving sessions where a larger RC vehicle would need more floor space. Whether used for careful indoor manoeuvres, as a small addition to a model collection, or as a road-car counterpart within a miniature vehicle lineup, the M-B 200/8 with trailer brings motion into a classic passenger-car theme. The combination of saloon and trailer gives the setup a distinct identity both at rest and in operation.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B Unimog U406, RC fire engine, RTR

€109.99

The Mercedes-Benz Unimog U406 has long been known for compact utility and all-terrain presence, and this 1:87 RC fire engine translates that character into a format built for close-quarters driving. Fine printing, high-quality paintwork and front and rear LED lighting give the body a convincing emergency-service appearance, while the very small turning circle suits narrow routes between scenery, tools or display pieces. The chassis uses 2WD rear-wheel drive and a brushed motor for controlled running, with fully proportional steering and acceleration allowing measured inputs instead of simple on-off commands. That control layout makes a visible difference on a desk, in a diorama or anywhere space is limited, because the model can be guided through tighter lines with cleaner corrections. The 2.4 GHz system supports stable operation, and the permanently installed 3.7 V 75 mAh Li-ion drive battery keeps the compact body free from bulky battery changes. Charging takes place via the transmitter and takes around 30 minutes. As a 100% RTR version, the set arrives with the remote control, the drive battery and the batteries required for the transmitter. Up to 60 minutes of driving time supports longer indoor sessions, whether the model is weaving through a small layout, tracing service routes across a tabletop or adding movement to a scale scene.

RC models in 1:87 scale

1:87 MB 1620 Tarp Truck, RC truck, 100% RTR

€139.99

The 1:87 MB 1620 Tarp Truck with trailer brings moving road traffic into H0 railway scenes with compact dimensions of 187 x 28 x 38 mm and fully assembled 100% RTR equipment. Official Mercedes-Benz Trucks licensing, fine printwork and the blue finish give this RC truck a recognisable presence beside stations, freight depots and urban track sections. Its 2.4 GHz radio system supports interference-free control and allows several models to run at the same time, which suits busy diorama setups with more than one active vehicle. The very small turning radius helps the truck work through narrow streets, loading areas and switching zones where larger RC formats would look out of scale. The trailer extends the road-train silhouette and the removable tarp changes the look of the load area for different scene concepts. Included in the set are the ready-to-drive model, 2.4 GHz remote control system, Li-Ion drive battery 3.7 V / 75 mAh, 4 transmitter batteries LR03 / AAA, and instructions. On a layout, the truck can roll alongside trains, serve as a delivery vehicle near a goods shed or move through a city section with controlled speed changes and steering inputs. Collectors can also place it as a static display piece, with the integrated driver figure and licensed cab details carrying the scale effect even when the model is parked.

RC helicopters

Eagle 280 Crash Stop, RC helicopter, 2.4G RTF

The Eagle 280 Crash Stop brings compact RC helicopter flying together with a front crash-stop sensor that reacts to obstacles by stopping and backing the model away. At 200 mm long, 280 mm wide and 125 mm high, this 56 g coaxial helicopter suits controlled flights in tighter spaces as well as calm outdoor use. The 2.4 GHz control system gives the model its dedicated radio link, while the emergency stop button on the transmitter adds a direct way to cut the action when needed. A 3.7 V 250 mAh LiPo flight battery powers flights of up to 7 minutes, and the model reaches speeds of up to 25 km/h. The aluminium chassis gives the structure a firm core, and the coaxial rotor arrangement supports balanced lift for measured handling. Spare rotor blades are included, so the set is equipped for continued running after routine contact or wear. Indoor flights near walls, hallways or furniture benefit from the forward obstacle response, while open areas allow short hovering runs, lift-offs and landings with the same compact airframe. The ready-to-fly package includes the helicopter, remote control system, USB charger and transmitter batteries, so the set is prepared for flight after the first charging process.

RC speed boats

RC Fire Boat 2.4G, RC boat, 100% RTR

The RC Fire Boat 2.4G 100% RTR brings firefighting action onto the water with a remotely operated water cannon, LED position lights and a sporty rescue-boat look. At 560 mm long, 147 mm wide and 215 mm high, the hull has a strong on-water presence, while the 2.4 GHz radio system keeps control stable across distances up to 100 m. The fully assembled boat is supplied as a ready-to-run set with a 7.2 V 1000 mAh NiMH drive battery, USB charger, 2.4 GHz remote control and 2 x AA transmitter batteries. Full driving functions cover forwards, backwards, left and right, so manoeuvres can be varied between straight sprints, tight turns and controlled repositioning for water-cannon play. A driving time of 45 minutes supports longer sessions before recharging, and the boat weight of 717 g keeps the format easy to handle between shore and water. Whether used on a pond, at the lakeside or on calm stretches of water, the fireboat combines radio-controlled driving with an extra action feature that changes how each run unfolds. Age 8 years+ marks the recommended age, and the included screwdriver supports the setup of the supplied components before the next launch.

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage, RC car

€17.99

The Aston Martin V12 Vantage brings British sports car character into a 1:60 Nano Racer format, combining licensed body styling with compact RC handling. At 79 mm long, 33 mm wide and 22 mm high, the black coupe keeps a low, planted look that suits short sprints across tables, smooth floors and small driving spaces. Its 2.4 GHz radio system gives the model a dependable link to the controller across 15 m, and the layout also allows up to 50 vehicles to run at the same time. That makes the small scale especially lively in group sessions, where several cars can share the same area without constant frequency conflicts. The ready-to-run setup keeps the focus on driving, while the included 1.2 V 80 mAh NiMH drive battery matches the compact chassis and the 25 g weight for quick, light movement. Charging runs directly through the remote control unit, so the car and controller work as one neat driving system. With a maximum driving time of 10 minutes, the Nano Racer suits short races, repeat laps and quick head-to-head runs. Age 4+ is stated in the product data. The included screwdriver supports battery access as part of the set contents, and the compact format makes the model easy to store between sessions.

RC speed boats

RC Yacht Hurikan, RC boat, 2.4 GHz RTR

€39.99

The Hurikan brings yacht styling and fast RC handling together in a compact 350 x 95 x 105 mm format built for lively water runs. Sand tones, white surfaces and dark window graphics give the hull a sharp, modern look, while the 2.4 GHz radio system keeps steering input responsive during laps across the lake. At 270 g, the model stays light in the hand for carrying to the shoreline, yet its twin-prop drive gives the boat the thrust needed for brisk acceleration on the water. Full driving functions cover forward, backward, left and right control, making tight turns and quick corrections easy to manage. The set includes a ready-to-run model, a 2.4 GHz remote control system, a USB charger, 2 x LR06 AA transmitter batteries and 2 spare propellers. The included 3.7 V 1200 mAh Li-Ion battery powers sessions of up to 40 minutes, and the drive engages only in water through the integrated shut-off circuit. That combination suits calm-lake outings, pond sessions and repeated practice runs where clean response matters as much as speed. Age 8+ marks the recommended age, and the complete RTR setup keeps the focus on steering lines, throttle control and fast passes across open water.

RC cars

1:24 Lamborghini Sian, RC car, 2.4GHz RTR

€24.99

The Lamborghini Sian brings super sports car styling into a compact 1:24 RC format, pairing a low, sharply shaped body with radio-controlled handling and a full ready-to-run setup. With a length of 195 mm, a width of 80 mm and a height of 49 mm, the model carries its proportions in a size that suits quick laps across smooth indoor surfaces. The 2.4 GHz remote control system supports stable command input during solo driving, while the 3.7 V Li-Ion drive battery with 500 mAh powers up to 60 minutes of ride time. At 172 g, the car stays light in hand and easy to place on the floor between runs. The included USB charger keeps the charging routine simple, and the set also contains 2 LR03 AAA transmitter batteries. A rear axle differential adds a mechanical detail that supports smoother cornering behaviour, while steering fine adjustment helps tune the driving line to the available space. LED lights at the front and rear keep the bodywork visible when the room gets darker and add extra presence during evening driving sessions. On a hallway course, around furniture legs or across a cleared living-room track, the compact dimensions, quick responses and detailed Lamborghini look create a focused RC session with a clear sports car character.

Mini RC cars

1:60 Nano Racer Fo.Must.Shelby GT500, RC car

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle-car presence, and this 1:60 Nano Racer translates that character into a compact RC format. With its licensed Ford design, red bodywork and stripe detailing, the small car brings a recognisable road-car silhouette to quick indoor driving sessions. The 2.4 GHz control system sends steering and throttle inputs over a range of 15 m, and it allows up to 50 vehicles to run simultaneously on the same frequency environment. Charging takes place through the remote control unit, which includes the charging connection for the 1.2 V 80 mAh NiMH drive battery. A full charge delivers up to 10 minutes of driving time. The ready-to-run format means the model, remote control with charging connection, NiMH drive battery, screwdriver and instructions are included. With dimensions of 79 x 33 x 22 mm and a weight of 25 g, the Nano Racer fits naturally into compact race setups where short straights, quick direction changes and close duels matter more than sheer size. The small scale also makes it easy to line up several cars for simultaneous runs, turning a table, hallway or smooth floor into a miniature racing scene with very little space required.

RC models in 1:87 scale

1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz

€129.99

The Mercedes-Benz O 302 shaped coach travel across Europe for years, and this 1:87 RC bus brings that familiar silhouette into moving H0 scenes with licensed bodywork, raspberry red paintwork and front and rear LED lighting. At 112 mm long, 36 mm wide and 51 g in weight, the model sits naturally among buildings, platforms and road sections without overpowering the layout. Its 2WD rear-wheel drive works with a 2.4 GHz 3-channel radio system for controlled movement at up to 50 m, while the compact format helps the bus thread through tighter streets and station areas. The integrated 3.7 V Li-Ion battery with 75 mAh is built into the model, keeping the setup clean and the proportions true to scale. As a 100% RTR version, the set includes the remote control, the lithium drive battery, 4x AAA batteries, instructions and a storage case. The licensed Mercedes-Benz O 302 DB format gives the bus a recognisable road-going character that suits realistic transport scenes. On a model railway layout, the bus can roll between station forecourts, depot roads and town routes, adding controlled movement where static vehicles would otherwise remain fixed. The compact H0 scale format also suits shelf presentation between driving sessions, with the lighting and paintwork carrying the look of a classic DB bus into close-up display settings.

RC models in 1:87 scale

1:87 VW T1 SambaBus, RC car, 2.4GHz RTR

The VW T1 SambaBus with trailer brings classic touring style into compact RC form at 1:87 scale. The ready-assembled set pairs the iconic bus silhouette with a matching caravan, while front and rear LED lights add visible presence during each run. A 2.4 GHz remote control system handles the model with fully proportional inputs, so throttle and steering respond in fine steps rather than simple on or off commands. Steering trim helps keep the vehicle tracking cleanly, especially on narrow routes and detailed miniature layouts. The 3.7 V 75 mAh Li-Ion drive battery supplies the power, and the transmitter also serves as the charging connection with a 60 minute charge time. The compact format and very small turning radius suit controlled driving in limited space where broader models would need more room. The combination of SambaBus and caravan creates a distinctive road-trip scene for shelf display, diorama use or active driving sessions. Included in the set are the ready-to-run model, the 2.4 GHz remote control system, the Li-Ion drive battery and 4 AAA transmitter batteries, so the model is equipped for use straight from the set.  Warning! Not suitable for children under 14 years.

RC aircraft

Easy Skydreamer, RC aircraft, 2.4 GHz RTF

€29.99

The Easy Skydreamer brings a compact flying-wing layout, twin propellers and 2.4 GHz control into a light RC aircraft that is built for straightforward handling in open-air flying sessions. At 240 mm long, 240 mm wide and just 20 g in weight, the airframe combines a small footprint with a notably light feel that suits quick launches and controlled passes. Its 6-axis gyroscope works continuously in the background to steady the model in flight, giving steering inputs a calmer, more predictable response than an unstabilised layout. The Flexipor airframe adds another concrete advantage: the material keeps the structure light while coping well with the bumps that can come with early practice flights. Twin rear-mounted propellers support the aircraft's powered flight concept, and the included 3.7 V 150 mAh LiPo flight battery supplies up to 15 minutes of runtime per charge. The set is configured as 100% Ready to Run, so the core flying hardware is already matched for use. Included in the set are the flight-ready model, the remote control, the LiPo flight battery, a USB charger, 2 x LR06 transmitter batteries and 2 spare propellers. With its stabilised control concept and low 20 g weight, the Easy Skydreamer suits park flights, first RC take-offs and short practice sessions focused on smooth turns, level passes and repeatable landings.

RC helicopters

Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF

€29.99

The Easy Tyrann 200 Boost IR brings compact indoor helicopter flying into a 100% RTF format with a 240 mm body, 200 mm rotor diameter and a 3-channel infrared control system. Its gyro-supported flight stabiliser helps keep the model composed in the air, while the switchable boost function adds an extra burst of power when the pace needs to change. A 3.7 V LiPo flight battery with 250 mAh capacity powers flight times of up to 9 minutes, and charging runs through the included USB charger. The transmitter also controls the color changing LED, so the light effect can be switched during flight rather than staying fixed. With a top speed of 15 km/h and a flight weight of 31 g, the helicopter stays light enough for controlled indoor use while still delivering lively movement. The ready-to-fly set includes the model, IR remote control system, LiPo flight battery, USB charger, 3x LR06/AAA transmitter batteries and spare rotor blades. Short hovering runs in a living room, careful turns along a hallway or repeated take-offs and landings on a smooth floor all suit the compact format. Age 8 Years+

Models & trailers

1:12 MB Unimog U300, RC truck, 100% RTR

The MB Unimog U300 has long been known as a compact utility truck with strong off-road credentials, and this 1:12 RC version carries that working character into a fire brigade layout with covered rear bed, roof beacons and front LED lighting. At 450 mm long, 220 mm wide and 260 mm high, the model brings a substantial road presence while staying manageable for regular driving sessions. The fully assembled chassis is ready to run with a powerful electric motor, digital proportional control and a 2.4 GHz remote control unit. Steering and throttle inputs can be adjusted progressively, which gives the truck a more controlled feel than simple on or off commands when lining up turns or easing over rougher ground. The included 7.4 V 850 mAh Li-Ion drive battery supplies up to 60 minutes of driving time, and a USB charger is part of the set. Horn and motor sound can be triggered from the transmitter, adding another layer of interaction during runs. With a vehicle weight of 2052 g, the model has enough substance to suit its utility-truck character. Fire brigade markings, the covered cargo area and the upright Unimog proportions make this RC truck fit naturally into rescue-themed driving scenes, yard layouts or obstacle courses with gravel, paving and mixed surfaces. The included transmitter batteries complete the 100% RTR setup, so the model can head straight into its first run after charging.

Mini RC cars

1:50 Nano City Dump Truck, RC truck, 2.4 GHz

€18.99

Construction trucks have long shaped city streets and building sites with their compact strength and unmistakable working profile. The 1:50 Nano City Dump Truck brings that familiar form into a small RC format with a true-to-original design, a detailed driver's cab and a ready-to-run setup for immediate use. Its fully assembled layout keeps the focus on driving, while the 146 g weight and 135 mm length create a handy format for controlled manoeuvres on tables, floors or improvised indoor routes. The open dump body gives the model its recognisable utility-truck silhouette, and the non-slip rubber tires provide the grip needed for cleaner starts, tighter turns and steadier movement on smooth surfaces. The 2-channel 2.4 GHz radio system supports interference-free control, which is especially useful when several radio-controlled models are active nearby. LED lighting adds another working-vehicle detail and makes the truck easier to track when the route runs through dimmer corners. Included in the set are the ready-to-run model, a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery, a USB charger and instructions. With up to 40 minutes of travel time, the compact dump truck suits quick driving sessions, small construction-themed layouts and repeated laps through indoor obstacle courses.

RC models in 1:87 scale

1:87 M-B Unimog U406, RC truck, 100% RTR

€114.99

The Mercedes-Benz Unimog U406 has long stood for compact utility vehicle engineering, and this 1:87 RC version carries that character into a small-format driving model with a matching trailer. In bright orange with detailed paintwork and precise printing, the Unimog combines a true-to-original look with compact radio-control technology for controlled runs across a desk layout, a diorama road or a small indoor course. The 2.4 GHz remote control is part of the 100% RTR setup, so the model arrives with the core driving equipment already matched to the vehicle. Front and rear LEDs work alongside the switchable warning light to sharpen the service-vehicle appearance during operation. Steering trim on the transmitter helps fine-tune straight running, which is especially useful at 1:87 scale where small corrections show clearly. The permanently installed Li-Ion battery is rated at 3.7 V and 75 mAh, and the set also includes the required transmitter batteries plus a storage case for transport and tidy shelf keeping. The trailer broadens the operating scene beyond simple laps, with a tilting bed and removable tarpaulin that suit loading and unloading setups in miniature worksite or farm-style layouts. With age recommendation 14 years and up, the model fits hobby sessions focused on compact manoeuvres, display layouts and detailed vehicle handling in limited space.

RC yachts

Bella Luisa 2.4G, RC boat, 100% RTR

€69.99

Classic runabout styling meets radio-controlled action in the Bella Luisa 2.4G 100% RTR. The 455 mm motorboat combines a glossy wood-look finish, a clear curved windshield and chrome-look deck details with full steering control, creating a striking presence on ponds and small lakes. The hull measures 455 x 105 x 140 mm and weighs 648 g, giving the boat a slim, low profile on the water. Inside the set are a 2.4 GHz transmitter, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA transmitter batteries, so the model is fully assembled and ready for operation. The propeller drive reaches up to 10 km/h, while the water-activated motor start means the propeller engages only when the boat is on the surface. The detailed fairing and driver's cabin shape add to the leisure-boat look, and the cockpit area offers space for a play figure. On a calm garden pond, the responsive left-right and forward-reverse controls support neat manoeuvres along the bank or broad passes across open water. A driving time of up to 25 minutes leaves room for longer sessions before the battery returns to the USB charger.

RC speed boats

Sea Ray 2.4 GHz, RC boat, 100% RTR

€54.99

The Sea Ray 2.4 GHz brings twin 380 brushed motors, a streamlined hull and RTR convenience together in a compact RC boat built for fast action on the water. At 395 mm long, 190 mm wide and 100 mm high, it cuts a neat profile across ponds and calm lakes, with LED lighting adding a clear visual accent as the hull moves through changing light. The fully assembled format keeps the focus on driving rather than setup, and the included 7.4 V 600 mAh Li-Ion battery supports up to 20 minutes of running time per charge. A charging time of 3 hours keeps the routine straightforward between sessions. The 2.4 GHz radio system is designed for 1 player control, while the water-protected receiver and battery box help keep key electronics covered from spray. A built-in shut-off means the motors only run in water, matching the boat's intended use with a clear functional safeguard. Its lightweight 349 g build makes carrying the model from bag to bank easy, and the compact shape sits comfortably in hand at launch and recovery. With 2 AA transmitter batteries included, the set is ready for immediate use in suitable water conditions, whether the plan is short speed runs, repeated passes along the shoreline or relaxed practice with steering and throttle control.

RC aircraft

Stinger 2.0 2.4GHz 100% RTF, RC airplane

€49.99

The Stinger 2.0 2.4GHz 100% RTF brings a light 29 g airframe, intelligent gyro electronics and a ready-to-fly setup into one compact RC airplane built for controlled first flights and relaxed repeat sessions. With a length of 315 mm and a width of 385 mm, the model carries a broad wing layout that gives the aircraft a clear presence in the air while keeping the format easy to transport to open flying spaces. The Flexipor construction keeps weight low and supports the light handling that suits this class, while the 2.4 GHz control system allows clean command input without cable setup. A 3.7 V 300 mAh LiPo battery powers the airplane, and charging runs through the included USB charger. Spare rotor blades are included for continued use after routine wear, and the included 2x AA batteries complete the transmitter power supply. The gyro system works with the control inputs to calm the model in flight, which helps maintain a steadier line during climbs, gentle turns and landing approaches. Open ground, a sports field or another suitable flying area gives the 385 mm wingspan room to work through smooth passes and repeated take-offs. The ready-to-fly format keeps preparation focused on charging, switching on and heading into the next 20-minute flying session.

RC truggies & RC monster trucks

1:10 Bokusa BL 2S 4WD RTR, RC car, yellow

€219.99

The 1:10 Bokusa BL 2S 4WD RTR brings brushless power and monster truck stance into a ready-to-run RC car built for fast off-road sessions. Its 455 x 312 x 180 mm format and 2165 g weight give the chassis a planted footprint, while the yellow body adds a bold trackside look. A 30 kg waterproof steering servo with metal gears handles steering input with firm control, and the fully ball bearing mounted transmission supports efficient running across the drivetrain. Metal differentials at the front and rear use steel bevel gears, adding a solid mechanical base for repeated acceleration and braking. The 2.4 GHz remote control system is included, and the radio system is water-protected for running in changing ground conditions. An XT90 high-voltage battery connector system and a quick-change battery mount keep battery swaps straightforward between sessions. With a stated runtime of up to 15 minutes, the model suits short, fast runs on dirt, gravel and uneven surfaces where suspension travel and tyre grip can be used fully. Age 14 Years. A battery is required separately.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 100% RTR 4WD

€199.99

The 1:10 XS Tekuro brings a fast off-road setup into a ready-to-run format, combining permanent 4WD, a high-torque 550 brushed motor and up to 40 km/h for lively runs across dirt, gravel and rough ground. At 410 mm long, 300 mm wide and 175 mm high, the chassis carries a broad monster-truck stance that suits uneven terrain and quick direction changes. Completely mounted on ball bearings, the drivetrain is built to reduce drag through the transmission, while metal differentials at the front and rear use steel bevel gears for direct power transfer under load. The XT60 high-voltage battery plug-in system supports a secure connection for the included 7.4 V 2600 mAh Li-Ion battery pack, and the quick-change battery holder keeps swaps straightforward between sessions. Weight comes in at 1741 g, giving the chassis enough mass to stay settled as the suspension works through bumps. The rear bumper integrates a wheelie bar that supports controlled lift when the motor loads up hard from a standing start. The scope of delivery includes the 100% RTR model, 2.4 GHz remote control system, 2600 mAh 7.4 V drive battery, 1 A USB charger, 4 LR06 AA transmitter batteries and a manual. Driving time is about 15 minutes, making the XS Tekuro a strong fit for park runs, compact off-road tracks and loose-surface sessions where quick setup and solid traction matter.  Warning! Not suitable for children under 14 years.

RC cars

1:12 Glow Rider, RC buggy, 2.4 GHz RTR

€54.99

The Glow Rider brings 1:12 RC buggy action together with vivid LED lighting, creating a strong visual presence when the track gets darker and the body starts to glow in motion. At 340 x 215 x 123 mm and 570 g, the model combines a compact footprint with a planted off-road stance that suits quick direction changes and fast evening runs. The 2.4 GHz control system supports multiplayer driving without the close-range interference common to older frequency setups, which helps keep each buggy responsive during shared sessions. Full suspension works beneath the low body shell to absorb uneven ground and keep steering inputs more consistent over rougher surfaces. Grippy off-road tyres add traction where loose dirt, gravel or short grass would unsettle a road-focused setup. The ready-to-run package includes the assembled model, a Li-Ion drive battery, a USB charger and 2 AA transmitter batteries, so the full driving setup is in the box from the start. Age recommendation: 8 years and up. A paved yard at dusk, a compact dirt section in the park or a smooth evening track all suit the Glow Rider well, especially when the illuminated body can stand out against lower light. Up to 25 minutes of driving time at full capacity gives each session enough length for repeated laps, quick races and steady practice with throttle and steering control.

RC tractors

1:16 Deutz-Fahr Tractor 8280 TTV, RC tractor

€84.99

The DEUTZ-FAHR 8280 TTV is recreated here as a 1:16 RC tractor with a detailed body, realistic driving functions and a strong farm vehicle presence. At 400 mm long, 180 mm wide and 234 mm high, the model carries the proportions of the original into a format that suits both active driving and shelf display. The ready-to-run set includes the tractor, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 transmitter batteries. Engine sound and horn add direct control inputs beyond steering and throttle, giving each run a more lifelike operating feel. The licensed DEUTZ-FAHR design is supported by cab details, body shaping and the characteristic tractor layout. With 5 frequency channels, the radio system provides stable control for solo driving sessions. Driving time reaches up to 90 minutes, allowing longer runs before recharging. On the floor at home, along a garden path or across lightly uneven ground, the compact dimensions and rigid axle help the tractor stay composed as it changes direction and tracks through tighter sections. Age 8 years+ marks the recommended age for use.

RC diggers

1:16 Volvo EC 160E, RC excavator, 100% RTR

€199.99

The Volvo EC 160E brings excavator handling into 1:16 scale with a ready-to-run RC setup, a true-to-original driver's cab and a working crawler layout built around 2 separately driven chains. With an operating weight of 2354 g and dimensions of 252 x 168 x 180 mm, the model carries a substantial presence while remaining manageable for controlled indoor driving and digging sessions. Its function package focuses on coordinated arm work rather than simple forward travel. The lifting arm and stick are made of plastic, and the spindle drive system moves the lifting arm, stick and bucket through deliberate, mechanical action that suits loading, lifting and placement tasks. The 2.4 GHz radio system supports single-user control, and the maximum operating time of up to 190 minutes allows longer work cycles before recharging. The included sheet metal shovel, scrap grab and excavator chisel shift the machine from earthmoving to gripping and breaking scenarios without changing the core vehicle. On a floor-based building site layout, the excavator can turn the uppercarriage through 360° to pick up, swing and place material within a compact work zone. The RTR package includes the model, remote control system, 7.4 V 1200 mAh Li-Ion drive battery, 3 LR06/AA transmitter batteries and instructions.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Pritsche, RC car, green trailer

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 RC version captures that familiar silhouette in a compact format with a green car trailer behind it. The radio-controlled layout turns the classic VW T1 Pritsche into a moving scale model that combines display character with active handling on a small footprint. Its 1:87 scale makes the model easy to place on layouts, shelves, or desks where larger vehicles would need far more room, while the trailer adds a second visual element that extends the transporter theme beyond the cab itself. The green finish gives the combination a clear, period-inspired presence, and the Pritsche body style keeps the utility look of the original vehicle at the centre of the design. As a powered ground vehicle, it brings motion to a format often chosen for static collecting, which changes how the model can be used between display moments and controlled runs. 5 batteries are included. The age marking is 14 Years. The compact dimensions implied by 1:87 scale suit short driving sessions on smooth indoor surfaces, model layouts, or table-based scenes where precise movement matters more than outright speed. It also fits neatly into collections built around classic transport themes, especially where a trailer combination adds extra visual interest without taking over the whole scene.

RC quadcopters

Cyber Drone Polizei, quadcopter, 2.4G RTF

€34.99

The Cyber Drone Polizei 2.4G 100% RTF brings compact quadcopter flying into a ready-to-fly format with a 2.4 GHz remote control, a 3.7 V 600 mAh LiPo battery and a USB charger. With a length of 125 mm, a width of 135 mm, a diameter of 150 mm and a rotor diameter of 45 mm, the layout stays light at 50 g ascent weight and suits quick take-offs in smaller open spaces. Its control setup combines several functions that shape how the model behaves in the air. The 8 minute flight time supports short, focused rounds, while the included transmitter power uses 3 AAA batteries. The headless mode changes orientation handling by referencing the control direction rather than the nose position, which helps keep steering inputs easier to read during turns. Trim adjustment for left and right flight allows finer correction when the quadcopter drifts off line. Blue and red flashing LEDs remain easy to spot once the model lifts away from the launch point. Ready-to-fly equipment keeps the set focused on getting airborne with minimal preparation, whether the session starts on a driveway, in a yard or across a calm section of park ground. The compact dimensions, return function and selectable speed levels make it easy to alternate between steady hovering, directional practice and quick stunt passes in the same outing.

RC cars

Magic Machine 2.0, RC car, 2.4 GHz RTR

€49.99

The Magic Machine 2.0 brings a striking twist to RC driving with a body that changes function at the touch of a button. In one moment it runs as a flat racer, and in the next it shifts into an off-road configuration with more ground clearance, creating a fast change of character on asphalt, ramps and rougher sections. Its layout combines separately steered front and rear units with all-wheel drive, so both axles work together as the vehicle changes direction. That unusual steering concept gives the model its own driving feel and supports quick reactions when obstacles appear in the path. The body design also allows the machine to flip backward over obstacles, continue driving on its back and right itself again to keep moving. LED lighting adds another visible detail during use, while the contrasting top and bottom styling makes each rollover part of the visual effect rather than a stop in the action. With a length of 340 mm, a width of 215 mm and a height of 123 mm, the model has a compact footprint matched by a weight of 570 g. The included Li-Ion drive battery delivers up to 25 minutes of driving time and is paired with a USB charger. A 2.4 GHz remote control in a game controller style is included, along with 2 AA transmitter batteries, so the ready-to-run set is equipped for immediate use after charging.

RC truggies & RC monster trucks

1:10 Bokusa BL 2S, RC car, 4WD RTR

€219.99

The 1:10 Bokusa BL 2S brings brushless power, 4WD traction and RTR convenience into a 455 mm off-road machine built for fast, dirt-focused running. With a width of 312 mm, a height of 180 mm and a weight of 2165 g, the chassis carries a broad, planted stance that suits rough ground and quick direction changes. Metal differentials at the front and rear use steel bevel gears to distribute drive across the axle line, while the fully ball bearing mounted transmission supports efficient running through the drivetrain. A 30 kg waterproof steering servo with metal gears gives the front end firm steering authority in wet or dusty conditions, and the water-protected 2.4 GHz remote control system keeps control input stable during outdoor sessions. The XT90 high-voltage battery connector system is paired with a quick-change battery mount, so battery swaps stay straightforward between runs. Age recommendation: 14 years and over. As an RTR model, the Bokusa BL 2S is set up for immediate driving once the required power source is added. Gravel tracks, compacted dirt and uneven open ground suit the suspension layout and tyre format especially well, while repeated acceleration runs benefit from the wheelie bar at the rear. Batteries are required separately.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Ryken, RC buggy, 100% RTR 4WD

€199.99

The 1:10 XS Ryken brings fast off-road running into a compact RTR format, pairing a 550 brushed motor with permanent 4WD for direct launches and steady pull across mixed terrain. At 410 x 300 x 175 mm and 1741 g, the buggy carries a broad, planted stance that suits dirt tracks, gravel paths and uneven ground. Power reaches the wheels through hardened steel drive shafts and a central steel cardan shaft, while front and rear metal differentials with sealed steel bevel gears keep the drivetrain precise under load. A chassis mounted on ball bearings supports efficient running, and the splashproof housing and electronics keep light rain and wet ground from stopping the session. The rear wheelie function uses targeted torque and traction control to lift the front end under acceleration, adding a distinct driving character beyond straight-line speed. A rear spoiler and rollover cage complete the body with added protection for the shell and electronics during tip-overs. The 100% RTR setup arrives pre-assembled with a 2.4 GHz remote control system, a 7.4 V 2600 mAh drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. That makes the XS Ryken ready for immediate running on open ground, from compact backyard courses to rougher off-road stretches where grip, suspension travel and drivetrain control all come into play.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Ryken, RC car, 100% RTR 4WD blue

€199.99

The 1:10 XS Ryken brings off-road action into a 410 mm long RC car with a wide 300 mm stance, 175 mm height and a ready-to-run setup built for immediate driving. Its blue body sits over a layout tuned for rough ground, where the combination of 4WD and generous clearance gives the chassis the grip needed for loose tracks, uneven paths and dusty sections. Power comes from a 550 brushed motor paired with a 7.4 V 2600 mAh Li-Ion drive battery, delivering up to 40 km/h and around 12 minutes of driving time. The hardened steel drive shafts transfer power with minimal play, while the sealed steel differential gears support clean, direct drivetrain response when dirt and vibration build up. The integrated wheelie function adds a distinct handling character by managing torque and traction so the front end can rise under acceleration. Oil-damped suspension helps the car settle after bumps and keeps the tyres working across broken surfaces. As a 100% RTR model, the set includes the ready-to-run vehicle, a 2.4 GHz remote control system, the drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. With a weight of 1741 g, the chassis carries enough presence for stable running on open ground, gravel stretches and wet outdoor surfaces where splashproof electronics matter.  Warning! Not suitable for children under 14 years.

RC cars

1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR

€54.99

The Lamborghini Murcielago SV translates the dramatic lines of the full-sized supercar into a 1:14 RC model with compact road presence and strong visual detail. At 330 mm long, 145 mm wide and 80 mm high, the body carries opening doors and a lifting hood that add hands-on interaction beyond pure driving. The detailed interior gives the cabin more depth when the body is viewed up close, while the front and rear LED system keeps the silhouette readable in lower light. A differential gear manages the drive effect between the wheels during turns, which helps the model hold a cleaner line through changing corners. Fully sprung suspension adds another mechanical layer, allowing the chassis to settle more evenly as the surface changes. The model weighs 631 g, giving it a planted feel in motion without losing the agile character expected from this scale. The fully assembled 100% RTR format keeps the focus on driving rather than setup, with a 2.4 GHz remote control unit included in the set. Also included are the 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR06 batteries. Driving time reaches up to 25 minutes, making the model well suited to repeated laps, short handling sessions and display breaks between runs.

RC buggys

1:8 Drakuro BL 3S 4WD RTR, RC car

€299.99

The 1:8 Drakuro BL 3S 4WD RTR brings brushless power, long-travel suspension, and a wide off-road stance into a ready-to-run RC car built for fast runs across mixed terrain. With a length of 500 mm, width of 370 mm, height of 330 mm, and weight of 3402 g, the chassis carries the planted footprint needed for high-speed driving and rough-surface control. A waterproof 30 kg steering servo with metal gears gives the front axle the force needed for direct steering inputs, while splash-proof electronics and housing support running where dust, spray, and loose dirt are part of the session. Steel differentials at the front and rear distribute drive through the drivetrain, and height-adjustable body mounts allow the shell position to be matched to the setup. The XT90 high-current connector system is designed for low-loss power transmission, supporting the demands of the brushless drive package under load. LED lighting at the front, rear, and roof keeps the body easy to track as conditions darken, and the rear bumper integrates a wheelie bar for hard launches under strong acceleration. The ready-to-run set includes a 2.4 GHz remote control and instructions. 14 Years marks the recommended age.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Volkswagen Beetle, RC car, 2.4 GHz RTR

Few cars carry the visual identity of the Volkswagen Beetle as clearly as this 1:87 RC version in red. The rounded body shape, detailed paintwork and decoration, and illuminated front and rear LED lights bring the classic silhouette into motion on a compact scale. The ready-to-run set includes the assembled model, a 2.4 GHz remote control system, a 3.7 V 40 mAh Li-Ion drive battery and 4 AAA transmitter batteries. Fully proportional control allows measured throttle and steering inputs instead of simple on-off commands, which gives the small chassis a more precise feel in confined spaces. Steering trim on the transmitter supports straight tracking when fine corrections are needed. The transmitter also handles charging, with a 45-minute quick-charge time matched by a driving time of up to 45 minutes. A storage showcase is included for keeping the model protected between runs. With its very small turning radius, the miniature Beetle suits short indoor routes, desk-side driving and detailed diorama settings where tighter corners matter. The 1:87 scale also makes it a strong fit for collectors and model-layout enthusiasts who want a drivable classic car with compact dimensions and a finished RTR setup.

RC models in 1:87 scale

1:87 VW Beetle, RC car, trailer, 2.4 GHz RTR

€114.99

The Volkswagen Beetle became one of the most recognisable car shapes of the 20th century, and this 1:87 RC version pairs that silhouette with a matching trailer for a compact driving set with strong period character. Detailed paintwork and decoration, front and rear LED lights, and the rounded body lines give the miniature a clear display presence even when parked between runs. Its 2.4 GHz radio system uses fully proportional control, so steering and throttle inputs can be adjusted smoothly instead of switching only between stop and full power. Steering trim helps fine-tune straight running, and the very small turning radius suits narrow routes on desks, shelves or indoor floors where larger RC models need more space. The included 3.7 V 40 mAh Li-Ion drive battery keeps the format compact, and the transmitter handles charging in 45 minutes. A storage showcase is included for presentation between driving sessions, and the set is marked 14+. The trailer adds a second moving element to the setup, changing the handling feel as the Beetle pulls a compact load through bends and turnarounds. Short evening runs, shelf display, or a small tabletop course all suit the 1:87 format, with the illuminated front and rear sections staying easy to spot as the model moves through tighter spaces.  Warning! Not suitable for children under 14 years.

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a nimble 125 mm x 135 mm format with a 150 mm diameter and a 45 mm rotor diameter. A button-triggered 360° flip function adds fast aerial action, while the Coming Home function returns the quadcopter to its home point at the touch of a button, creating a clear, easy rhythm between short flights and recovery. Its 3.7 V/600 mAh LiPo flight battery supports up to 8 minutes of flight time, and the 50 g ascent weight keeps the model light in the air. The IR control concept is paired with 3 speed settings, so the handling can stay measured for early practice or become more lively for tighter reactions. Blue LED lighting adds clear visual orientation once the quadcopter lifts off, especially when the frame is moving quickly through flips, turns and short climbs. The green finish gives the model a bright, high-contrast look in motion. Short sessions in the living room, open indoor areas or calm practice runs with repeated take-offs and landings all suit this ready-to-fly setup. Included contents are the ready-to-fly model, IR remote control, LiPo flight battery 3.7 V/600 mAh, USB charger and instruction manual.

RC speed boats

RC Boot Rescue 2.4G, RC boat, ready to run

€39.99

The RC Boot Rescue 2.4G brings rescue-boat styling and quick radio-controlled handling together in a compact 350 mm format. The red and yellow hull, raised cabin and roof light details create a clear emergency-service look on the water, while the 2.4 GHz control system keeps commands responsive during fast passes and tighter steering inputs. At 95 mm wide and 105 mm high, the boat combines a slim profile with a stable stance for controlled manoeuvres. Forward, backward, left and right control allows precise handling around pool edges, small obstacles and turning points. The fully assembled model comes as a ready-to-run set with remote control, a 3.7 V 1200 mAh Li-Ion battery, a USB charger and 2 x LR06 AA transmitter batteries. With a weight of 270 g, the hull stays easy to carry to the water and simple to set down for the next run. The water-activated circuit keeps the drive inactive on land and switches operation on only in water. Up to 40 minutes of running time supports longer sessions at the pond or in a larger pool, and the 2 spare propellers add a practical replacement set for regular use. Age recommendation: 8 years+

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

€74.99

The 1:10 Cage Fighter brings desert buggy styling, radio-controlled handling and ready-to-run convenience into one fast-moving off-road setup. As a fully assembled RC buggy with 2.4 GHz control, it heads straight into dirt tracks, packed gravel and open ground with a low barrier to entry and a focused motorsport feel. Its full suspension supports precise steering response when the surface turns uneven, while the grippy off-road tyres help the buggy hold traction across changing terrain. Solid bumpers at the front and rear add protection in the zones that take the hardest knocks during close running. At 436 mm long, 234 mm wide and 147 mm high, the chassis has a planted footprint that suits outdoor driving, and the 806 g weight keeps the model agile in direction changes. The included Li-Ion drive battery runs at 7.4 V with 500 mAh capacity, and the set also includes a USB charger, a 2.4 GHz remote control and 2 x LR06/AA transmitter batteries. Top speeds of up to 18 km/h add a brisk pace without pushing the model beyond approachable control. Whether the route runs over compacted soil, short grass or rougher backyard ground, the Cage Fighter is built for active RC sessions rather than shelf display. Age 8+ marks the recommended age, and the 100% RTR format keeps the focus on charging the battery, taking the controller in hand and getting the buggy moving.

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

€74.99

The 1:10 Cage Fighter brings fast off-road RC action into a ready-to-run format with a fully assembled chassis, 2.4 GHz radio control and a 7.4 V 500 mAh Li-Ion drive battery. At 436 mm long, 234 mm wide and 147 mm high, the buggy cuts a planted stance as it charges over dirt, gravel and uneven ground. Its full suspension helps the wheels stay in contact with the surface, so steering inputs translate into cleaner direction changes instead of skittish bouncing. The 806 g vehicle weight supports an agile feel without losing presence on the track. Front and rear bumpers frame the chassis with added protection in the zones that meet obstacles first, which suits repeated running in tighter spaces and rougher outdoor sections. The included USB charger keeps the battery routine straightforward, and the supplied 2 x LR06 AA transmitter batteries complete the set. With a driving time of 25 minutes and speeds of up to 19 km/h, the Cage Fighter suits short backyard sessions, improvised dirt courses and casual head-to-head runs with other 2.4 GHz models. Age 8+ is stated for this RC buggy, making it a strong entry point into radio-controlled driving while still offering enough pace and control to stay engaging beyond the first outings.

RC cars

1:10 Night Racer 2.0, RC car, 2.4GHz RTR

The Night Racer 2.0 brings low-slung on-road styling and ready-to-run RC action into one focused 1:10 setup, with a 2.4 GHz control system and a top speed of 20 km/h shaping fast laps on smooth ground. At 485 mm long, 200 mm wide and 125 mm high, the body cuts a sharp racing silhouette that stands out in motion and under evening light. A 260 mm wheelbase and a weight of 737 g give the chassis a balanced footprint for quick steering inputs and stable tracking through linked corners. The differential transmission helps the driven axle work cleanly when the car changes direction, while the suspension layout keeps the wheels in contact over uneven patches and transitions. The included 7.4 V 1200 mAh Li-Ion drive battery supports up to 40 minutes of driving time, and the USB charger keeps the running gear simple to prepare between sessions. Detailed paintwork adds a finished motorsport look, and the blue illuminated rim design sharpens the visual effect once the light drops. On a driveway, in a car park or across a smooth indoor surface, the RTR setup gets the car moving with the supplied remote control system and included transmitter batteries. The compact racing profile, quick response and illuminated wheel styling suit short speed runs, repeated corner practice and evening cruising alike.

RC cars

1:12 RaceRival Combo, RC car, 2.4G RTR

€59.99

The 1:12 RaceRival Combo brings 2 fully assembled RC cars into one set, creating instant side-by-side racing with matching 2.4 GHz radio control. Each model measures 304 mm in length and uses a 3.7 V Li-Ion drive battery with 500 mAh capacity, giving the pair a compact racing format with rechargeable power for repeated sessions. The set includes 2 remote controls, 2 Li-Ion drive batteries, 2 USB chargers and 4 AA transmitter batteries, so both vehicles are equipped for running from the start. A maximum driving time of 40 minutes keeps races going beyond a quick sprint and leaves room for repeated heats, overtaking attempts and back-to-back comparisons between the 2 cars. The pistol-grip transmitters use a trigger for throttle input and a side steering wheel layout familiar from hobby-grade RC driving. Steering fine adjustment on the vehicles helps correct the running direction when the track or surface calls for a more precise setup. Front LED lighting remains clearly visible as the cars move through indoor floors or paved outdoor sections, while the printed body shells give each model its own strong race-day presence. With an age marking of 8 years and up, the set suits shared racing sessions at home, quick duel formats in the driveway and casual practice laps where both cars can be charged, lined up and sent off again.

RC lorries & RC trucks

1:14 3-axle Material trailer, RC trailer

€699.99

At 1:14 scale, this 3-axle Material trailer brings the look and handling of a working cargo hauler into a detailed RC setup. The 981 mm long body combines a laser-cut steel frame in 3 mm and 1 mm sections with a real wooden floor application, creating a technical build with strong visual contrast between metal structure and load bed. The front wall is made from aluminium, while the rear bumper uses 8 mm aluminium for a solid, sharply defined finish. Left and right steel underride protection adds another authentic construction detail to the lower sides. The CNC-milled aluminium dropsides carry engraved surfaces and are built for active use rather than fixed display, with 9 functional panels, removable dropside posts, and 4 hinges on each dropside made from 1 mm steel. Neodymium magnets handle the locking, giving the side sections a tidy closing action without bulky external catches. Wide chromated wheels with ball bearings and wide tyres support smooth trailer movement, and the included suspension offers an optional 8 mm elevation for a different ride height. A steel spare wheel holder with spare wheel is fitted, and the finished trailer measures 981 x 195 x 210 mm with a weight of 6,900 g. Age 14+

Models & trailers

1:14 Goldhofer BAU STN-L3, low loader kit

€584.99

Heavy-haul transport has a distinct presence in scale form, and the Goldhofer BAU STN-L3 brings that character into a 1:14 low loader kit with a long 1000 mm body, a width of about 200 mm, and a height of 270 mm. The laser-cut, hard-soldered steel profile construction gives the trailer its technical look, while the plateau with tailgate extends the transport layout for detailed truck scenes. The build centres on mechanical functions that suit model-building enthusiasts. The split folding loading ramps are arranged in 3/4 and 1/2 sections and can be folded down by hand for driving operation. A ramp length of 290 mm in the raised configuration is stated in the data. Three rear axles carry twin tyres, and the axle area is detailed with dummy air springs for a scale heavy-duty appearance. Ball bearing mounting supports the running gear, and the 7-chamber taillights can be retrofitted electrically. All columns are mechanically adjustable, and the front support area can be expanded with optional E-support legs. The trailer fits all Tamiya trucks, making it a strong match for detailed tractor units in 1:14 truck layouts. On a workshop bench, in a transport diorama, or coupled for slow manoeuvres with scale cargo, the low deck, upright ramp geometry, and multi-axle layout create the look of a working heavy equipment hauler. Age 14 Years  Warning! Not suitable for children under 14 years.

RC tractors

1:16 Deutz-Traktor 8280TTV, RC tractor

€109.99

The Deutz-Traktor 8280TTV in 1:16 scale brings agricultural RC driving into a compact format with a matching trailer and a fully equipped ready-to-run setup. The model uses a 2.4 GHz remote control system and arrives with the drive battery, USB charger and 2 x LR03 AAA transmitter batteries, so all core components for operation are already in the box. Its 7.4 V system pairs with a 500 mAh Li-Ion battery to deliver up to 90 minutes of operating time, giving the tractor enough endurance for repeated hauling runs, careful reversing and steady trailer work. The trailer adds a second handling element to each session, since turns, alignment and positioning need more control than a single vehicle on its own. With 5 frequency channels available, the radio setup supports controlled input during forward runs, direction changes and tighter manoeuvres. The ready-to-run format keeps the focus on driving rather than sourcing the basic operating equipment separately. On the floor, the tractor and trailer combination suits routes with bends, loading-play setups and repeated parking tasks where the longer overall shape changes how each turn is approached. The 8+ age marking fits a model that combines vehicle control, trailer guidance and battery-powered runtime in one clearly structured RC format.

RC cars

1:24 Ford GT, RC car, 2.4 GHz RTR

€24.99

The Ford GT became one of the defining super sports car shapes of its era, and this 1:24 RC car brings that low, wide silhouette into a compact format built for quick laps and precise control. With a fully assembled ready-to-run setup, the model goes straight from charging to driving with the included 2.4 GHz remote control, Li-Ion drive battery, USB charger and transmitter batteries. At 195 mm long, 80 mm wide and 49 mm high, the body keeps the proportions of the road car clear while staying easy to handle on smaller indoor routes. The 172 g weight gives the chassis a light, agile feel in motion, and the fine-tuned steering supports accurate line changes through short straights and tighter bends. Front and rear LED lighting extends the visual effect beyond daylight conditions, while the licensed Ford design and realistic sports car look keep the model closely tied to its full-size inspiration. The 3.7 V drive system uses a 500 mAh Li-Ion battery and reaches up to 60 minutes of driving time at full capacity, making longer sessions possible without frequent charging breaks. Non-slip rubber tires work with the rear differential to maintain traction and stable handling as the car accelerates, turns and settles into repeated circuit runs. Age 6+ marks the recommended age, and the complete RTR format suits first RC laps as well as relaxed driving sessions for motorsport fans.

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

€174.99

The 1:8 Rock Wilder brings large-scale off-road presence to every run with a 530 mm long chassis, full suspension and digital proportional control. In black and red trim, the ready-to-run setup pairs a type 550 brushed motor with water-resistant RC components for driving on mixed terrain where dust, loose gravel and uneven ground are part of the appeal. Its 355 mm width and 220 mm height give the model a broad, stable stance, while the 2552 g weight adds substance as the suspension works through ruts and bumps. Reinforced suspension arms support the independent layout at each corner, and the quick-change battery mount keeps battery swaps straightforward between sessions. The included 7.4 V 3000 mAh Li-Ion drive battery, USB charger, 2.4 GHz remote control and 4× LR06 transmitter batteries cover the core running equipment in one box. Age recommendation: 14 years+ The Rock Wilder suits trackside bashing, open gravel areas and compact dirt routes where the proportional steering and throttle inputs can be used with precision. Water-resistant electronics help the model stay focused on the route when conditions turn messy, and the RTR format keeps the emphasis on charging up and heading out for the next run.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 MB 1620 flatbed truck, RC model, RTR

€129.99

The 1:87 MB 1620 flatbed truck with trailer brings compact RC control into H0 railway scenes with a fully assembled 100% RTR setup and finely scaled proportions. At 187 mm in length, the model is sized for dioramas and model railroad layouts where precise movement, lighting and sound add life to streets, depots and loading areas. A 2.4 GHz remote control system handles steering, speed and the switchable engine sound, while the integrated 3.7 V 75 mAh Li-Ion drive battery recharges through the transmitter in about 45 minutes. Front and rear LED lighting supports realistic operation in dimmer layout settings, and the very small turning circle helps the truck work through narrow routes and confined manoeuvring zones. The detailed body uses high-quality plastic construction with fine printing, and the removable tarpaulin changes the look of the trailer for different scene setups. A driver figure adds another scale detail for display, and the included trailer extends the vehicle's presence in transport scenes. With up to 60 minutes of operating time, the model suits longer running sessions on H0 layouts, from careful reversing at a loading bay to steady road movement between buildings and trackside structures.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Mercedes Benz 200/8 Taxi, RC car, RTR

€109.99

The Mercedes Benz 200/8 shaped the look of everyday saloons in the late 1960s and 1970s, and this 1:87 RC car brings that familiar taxi silhouette into a compact radio-controlled format. The small scale and RTR layout combine classic road-car character with immediate driving action on desks, display areas, or smooth indoor surfaces. Its 100% RTR specification means the key running setup is already part of the set, keeping the focus on steering inputs and controlled movement rather than sourcing core equipment first. The included 5 batteries support a ready-to-start configuration straight from the pack. With a recommended age of 14 years, the handling and scale suit enthusiasts who enjoy compact vehicle models with a recognisable real-world subject. The taxi styling gives the body a distinct period look that stands apart from modern racing or off-road themes. Between short driving sessions, the 1:87 format also makes the model easy to place in a collection of miniature road vehicles. It works well as a small RC model for indoor runs, as a conversation piece on a shelf, or as a classic Mercedes Benz subject in a compact hobby lineup.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Mercedes Benz 200/8, RC car, 100% RTR

€109.99

The Mercedes-Benz /8 series shaped everyday motoring in the late 1960s and 1970s, and this 1:87 Carson model captures that familiar saloon silhouette in a compact radio-controlled format. Finished in blue and supplied as a 100% RTR version, the miniature is set up for immediate use with 5 batteries included. Its 1:87 scale gives the model a notably small footprint, making controlled runs possible in spaces where larger RC cars would feel oversized. The classic 200/8 body shape brings a recognisable road-car character to each manoeuvre, while the compact format invites careful steering, short direction changes and neat placement on smooth indoor surfaces. With batteries already part of the set, the focus stays on the driving session itself rather than on sourcing the basic power supply first. Between runs, the blue finish and saloon proportions also make the model easy to place on a desk or shelf as part of a collection of compact vehicles. The combination of RTR convenience, included batteries and 1:87 scale makes this Mercedes Benz 200/8 a concise entry into small-format RC driving for hobbyists aged 14 years and up.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW Beetle, RC car, 2.4 GHz RTR

€104.99

The Volkswagen Beetle remains one of the most recognisable car shapes of the 20th century, and this 1:87 RC version translates that silhouette into a compact model built for active driving. At 50 mm long, 20 mm wide and 18 mm high, the Bahama blue Beetle combines miniature scale with fully controllable handling and a detailed body that carries the character of the original into H0 format. Its 2WD RWD layout works with a brushed motor to deliver balanced running behaviour, while the 10 g weight keeps the model light on the surface. The officially licensed Volkswagen design is matched with front and rear LEDs that define the car clearly as it moves through table layouts, floor circuits or display-style street scenes. The 100% RTR set includes a permanently installed 3.7 V 40 mAh Li-Ion battery, 4x AAA transmitter batteries and a storage case, so the driving setup is complete straight away. The 2-channel radio system supports controlled runs with a range of up to 50 m, making the Beetle suitable for compact slalom routes, desk-side driving and small indoor courses where accurate line changes matter. Age marking: 14 years. Charging takes place through the transmitter and keeps the model ready for regular sessions between laps.

RC models in 1:87 scale

1:87 VW T1 Bus Van, RC car, car trailer

€114.99

The VW T1 became one of the most recognisable light commercial vehicles of the 1950s, and this 1:87 RC version brings that silhouette into a compact driving format with a matching car trailer. At 115 mm long, 28 mm wide and 21 mm high, the ready-to-run model fits neatly into small layouts while still carrying the bus profile, printed finish and illuminated front and rear lighting. The 2.4 GHz radio system gives stable control for 1-player operation, and the fully proportional setup allows measured inputs instead of simple on-off movement. With a weight of 18 g, the model stays light in hand and easy to place on shelves or in model scenes between runs. The included Li-Ion drive battery is rated at 3.7 V and 75 mAh, while 4 LR03 AAA transmitter batteries are also included in the set. Steering trim supports precise correction when the bus tracks slightly left or right, which is especially useful on narrow routes where the small turning circle can be used to full effect. The display case adds a clean way to store the bus and trailer between sessions or present them as part of a collection. On a desk, shelf layout or compact indoor course, the combination of trailer detail, proportional control and long 50-minute runtime creates a focused micro RC driving session with a strong model-railway scale presence.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Kastenwagen Jägermeister, RC car

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 Carson version translates that familiar panel van shape into a compact RC format with Jägermeister livery. At 50 mm long and 20 mm wide, the model brings authentic proportions, detailed printing and front and rear LED lighting to desks, shelves and small indoor driving spaces. Its fully proportional control system gives measured steering and speed response instead of simple on-off inputs. A steering trim function helps fine-tune straight running, while the very small turning radius suits narrow table courses and close obstacles. The 2.4 GHz radio system supports stable control, and the sensitive forward and reverse function makes low-speed corrections easier in confined spaces. A brushed motor and 2WD RWD layout shape the driving character, while the permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time. With a height of 19 mm and a weight of 16 g, the van stays easy to place and store between runs. The set includes a display case for storage, which also keeps the miniature body protected when the model is off the course. 4x AAA transmitter batteries are included, so the RTR format covers the essentials for immediate indoor driving.

RC helicopters

Cyber Copter IR 2Ch, RC helicopter, RTF

€21.99

The Cyber Copter IR 2Ch brings compact helicopter flying into a ready-to-fly format with a modern grey fuselage and a focused control layout. At 230 mm long, 95 mm high and with a 190 mm rotor diameter, this RC helicopter stays compact enough for indoor sessions while reaching speeds of up to 10 km/h. Its flight system combines infrared control with 2 channels for clear directional input, and the integrated gyroscope helps keep movement steady once airborne. Fine tuning comes from individually adjustable left and right trim, allowing the flight path to be corrected to suit the room and the handling style. The switchable LED position lights are activated from the transmitter, making the model easier to track visually when the light drops at dusk. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime per charge, and the USB charger keeps charging straightforward between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8 Years

RC yachts

Nano Racer Yacht 2.4G

€19.99

RC action on the water! With the Nano Racer Yacht, luxury RC fun on the water is realized. The ready-to-run yacht model delivers full driving fun right after unpacking and brief charging. It is controlled with a 2.4 GHz radio remote control and offers a range of up to 40 meters. Thanks to the safety shutdown, the propellers only work when the model is in contact with water. All RC components are water-resistant, making the yacht ideal for exciting action on the water. The set includes a LiPo battery and clear instructions for quick start-up. Compact, fast, and easy to control, the Nano Racer Yacht is a fun watercraft for hobby and play.

RC helicopters

Nano Tyrann 230 Gyro, RC helicopter, 2CH IR

€24.99

Compact dimensions and a coaxial rotor layout give the Nano Tyrann 230 Gyro a light, agile presence in indoor flight, while intelligent gyro electronics keep the model composed during lift-off, hovering and direction changes. At 225 mm long, 97 mm high and only 31 g in weight, this 2-channel RC helicopter brings controlled handling into a format that is easy to store and quick to prepare. The infrared control system focuses the flying experience on the core inputs, with left and right trim on the transmitter to correct the track when needed. A 3.7 V 130 mAh LiPo flight battery powers up to 8 minutes of flying time, and charging runs through the included USB cable. The rotor diameter of 180 mm gives the helicopter a balanced footprint for indoor rooms, where short climbs, hovering practice and careful turns can be repeated in a manageable space. The switchable LED adds a visible point at the nose during flight and can be controlled directly from the transmitter. The ready-to-fly set suits spontaneous sessions in living rooms, hobby spaces or other indoor areas where compact RC aircraft can be flown with precision. Age 12 years and up. Only suitable for indoor use.

RC quadcopters

X4 Quadcopter Yairo, RC aircraft, 2.4 GHz RTF

The X4 Quadcopter Yairo brings compact quadcopter flying together with illuminated detail and straightforward control in a ready-to-fly format. With a ring diameter of 150 mm, a height of 37 mm and a weight of 52 g, the model stays light and agile in the air while the three-colour LED setup gives each flight a vivid visual presence. Its electronically rotatable LED ring is controlled by the remote control, adding a moving light element that changes the look of the quadcopter during flight. The 3.7 V 500 mAh LiPo flight battery supplies up to 8 minutes of runtime, and the included USB charger keeps the setup simple between sessions. 4 frequency channels support responsive handling, while the compact dimensions make the model easy to carry to open indoor spaces or calm outdoor areas. The included LR06/AAA transmitter batteries mean the full set is ready for use straight from the contents provided. Short practice flights, evening hovering sessions and quick manoeuvre runs all suit this RC aircraft well. The 8+ age marking and 1-player format make it a focused flying model for learning control inputs, refining reactions and enjoying illuminated flights with a compact quadcopter layout.

RC speed boats

XS Deep Sea Dragon, RC submarine, 100%RTR

€39.99

Compact RC submarines bring a different kind of model action, and the XS Deep Sea Dragon shifts that action below the surface. This 100%RTR RC submarine combines a compact orange hull, 3-channel 40 MHz control and blue LED illumination for visible manoeuvres in baths, pools and aquaria. The set includes the mini submarine with RC system, a 3.7 V 90 mAh Li-Ion drive battery, a USB charger, 2 transmitter batteries and instructions. Forward, backward, left and right steering are joined by dive and surface functions, so movement is not limited to a flat path across the water. The blue LEDs stay visible during operation and help keep the model in view while it changes depth. With up to 6 minutes of runtime, each charge suits short underwater runs with a clear start and finish. The USB charging cable can be stowed in the transmitter, so the charging lead stays with the control set between sessions. In use, the compact format suits smaller water spaces where tight turns and depth changes stay easy to follow. Age 8+ marks the recommended age. The submarine is intended for fresh water use in swimming pools, baths and aquaria; do not use in salt water.

RC tires & rims

1:10 2WD Wheel Set XL, RC tire set

€37.99

Give your 2WD RC buggy or truck a massive performance upgrade with the Carson 1:10 XL Wheel Set. This specially designed set is the ideal solution for model builders who want to give their vehicle an impressive “monster” look and improved off-road capability. What makes this set special is its precise tuning: Since XL tires can affect conventional steering angles, Carson includes the matching steering levers right in the package. These are engineered exactly to perfectly compensate for the larger wheel diameter of 105 mm and ensure full maneuverability. The technical details are specifically designed for the Tamiya DT-02 and DT-03 chassis —while the front rims are designed to directly accommodate ball bearings, the rear rims use the proven 12mm hex drive, which is standard on Tamiya and many other brands. The black-and-white color scheme also provides a modern, sporty look. Whether on loose gravel or rough terrain, the wide 65-mm contact patch guarantees optimal traction and stable handling.

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD

€31.49

Built for 1:10 2WD buggies and trucks, this 4-piece all-terrain wheel set brings a track-ready combination of steering precision and drive traction to mixed surfaces. The black and white wheel design pairs 2 front tyres and 2 rear tyres in different widths, creating a layout that suits the demands of a 2-wheel-drive setup on road, gravel, sand and grass. At the front, the 26 mm tyre width supports a more exact steering response, while the 43 mm rear tyres give the driven axle a broader footprint for stronger acceleration grip on loose ground. Each wheel has a 90 mm diameter, giving the chassis a useful balance of agility and clearance over uneven terrain. Foam inserts inside the tyres help the contact patch stay consistent as the model changes direction or loads up under power. The front rims are designed for ball bearings, and the rear rims use Tamiya hex mounts, matching the different mounting needs across the vehicle. Because the tyres are professionally pre-glued, the set goes straight into the workshop plan without a separate bonding step. That makes it a practical choice for replacing worn running gear, preparing a buggy for mixed-surface driving, or setting up a truck for more dependable traction away from smooth tarmac.

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD/4WD

€31.49

Built for mixed-surface running, this 1:10 all-terrain wheel set combines a 90 mm diameter with a 2WD/4WD layout that suits a wide range of RC setups. The 4-piece configuration uses 2 front tyres and 2 rear tyres, creating a purposeful combination for models that need clear steering response at the front and stronger drive support at the rear when the surface changes from asphalt to loose ground. The front tyres measure 26 mm in width, while the rear tyres measure 43 mm, giving the set a staggered format that supports balanced handling under acceleration. Black and white rims add a clear competition-inspired look, and the tyres are professionally pre-glued to the rims for a clean fit straight from the pack. Integrated foam inserts help the tyres hold their shape during intensive driving manoeuvres, so the tread can work consistently as the model loads up in turns and over uneven sections. The wheel set is designed for 4 x 12 mm Tamiya hex mounts, making it a practical replacement set or a fresh running option for compatible chassis. On road, gravel, sand or grass, the all-round tread is aimed at drivers who switch between surfaces instead of tuning for only one. The set suits routine replacement after wear, but also works as a handling-focused update when a model needs broader traction coverage for everyday RC running.

RC combustion engines & glow plugs

1:10 BL Motor Dragster Turbo 2.0, motor

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 3200KV is a brushless drive unit created for electric RC vehicle projects with a clear focus on dragster-style power delivery. Its 3200KV specification points to a fast-revving motor character that suits straight-line acceleration setups and gives model-building enthusiasts a concrete tuning component for 1:10 platforms. As a standalone motor, this unit fits into workshop-based RC builds where the drive system is chosen part by part. The brushless layout makes it a relevant option for hobbyists comparing replacement motors or planning a fresh electric configuration around a defined KV value. The Turbo 2.0 naming gives the motor a distinct place within the range, while the 1:10 scale reference keeps the application tied to model car use rather than full-size electronics. No batteries are included. The age marking is 14 Years. On the bench, this motor suits rebuilds, performance-focused maintenance and targeted drivetrain changes in electric model cars. It also works well as a search-friendly option for enthusiasts narrowing a setup by scale, motor type and 3200KV specification before matching the rest of the electronics separately.  Warning! Not suitable for children under 14 years.

RC brushless motors

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a compact power package to RC vehicle builds with a sensorless 3200 kV motor and an electronic speed controller matched to hobby-grade running. In the chassis, the black finned motor layout and separate controller create a clean drive setup for fast acceleration and direct throttle response. The motor delivers a no-load speed of 24,420 RPM and approx. 390 W short-term output, with 53 A continuous current for sustained running. Its dimensions of 35.8 x 50 mm and a shaft diameter of 3.175 mm provide concrete fitting data for compatible installations, while the motor weight of 148 g and ESC weight of 80 g help when planning the balance of a 1:10 model. The controller is designed for 7.4 V operation and works with 2S LiPo or 6-cell NiMH battery packs. Forward, brake and reverse functions are built into the ESC, and the T-Plug connector forms part of the power connection. This set suits RC car projects that need a coordinated motor and controller combination rather than separate component sourcing. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a matched drive upgrade to electric RC models with a 2000 kV sensorless motor and a 60 A electronic speed controller. This 2-part combination is built for hobby setups that need clear throttle delivery, compact installation and a defined power package in one box. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, making it a concrete fit option for many 1:10 chassis layouts where motor space and shaft size matter during planning. Its no-load speed reaches 15,170 RPM, while short-term output is rated at approx. 236 W for lively response when the drivetrain comes under load. The ESC adds 80 g, handles 60 A continuously and up to 360 A peak, and manages forward, brake and reverse functions through a sensorless brushless system. Power supply compatibility covers 2S LiPo and 6-cell NiMH packs, with a T-Plug connector already specified. This set suits rebuilds, replacement projects and performance-focused electronics swaps in 1:10 electric vehicles. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions, giving model-building enthusiasts a clearly defined basis for a fresh drive configuration.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, motor, 2600KV

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 2600KV is a brushless drive component for electric model vehicle setups, centered on a 2600KV motor specification and a format matched to 1:10 applications. As a dedicated replacement or upgrade part, it brings the drive system back into service with a clearly defined motor unit for workshop benches, rebuilds and running repairs. Within a powered vehicle setup, the motor sits at the heart of the drivetrain, making the KV rating a key reference point when matching the unit to the existing electronics and the intended running character. The product data identifies this version specifically as the Dragster Turbo 2.0 motor, which keeps the designation clear when replacing a worn unit or sourcing the correct spare for an existing model. Because this is a component rather than a complete vehicle, the focus stays on fit within an electric model system and on the practical value of having the correct motor type ready for maintenance. The 14 Years age marking is stated in the product data. On the workbench, this kind of motor suits planned repairs, drive refreshes and parts-led tuning sessions where a named 1:10 brushless unit is the required starting point for getting a model back on track.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 Torque Beast, RC car, 2.4 GHz RTR

€129.99

The 1:10 Torque Beast brings classic monster truck presence to RC driving with a 430 mm length, 310 mm width and 200 mm height that give the chassis a broad, purposeful footprint on rough ground. A solid bumper with integrated LED lighting adds a bright front-end detail, while water-resistant RC components and splash-proof electronics support running when the surface turns damp or dusty. At 1364 g, the model combines its size with a manageable overall weight that suits quick direction changes and repeated runs. The 7.4 V 1500 mAh Li-Ion drive battery is included, and the stated running time reaches 25 minutes before the pack heads back to the USB charger. The fully assembled RTR format keeps the focus on driving rather than setup, and the 2.4 GHz system supports stable control without the frequency crystals older RC systems required. Minimum age: 14 years. On gravel paths, compact dirt sections or uneven yard surfaces, the Torque Beast has the ground clearance and tire format to keep the run lively without losing control. Evening sessions gain extra character from the front LED lighting, and the included battery set means the truck is equipped for the first outing straight away.

RC tires & rims

1:10 Wheel Set XL, RC wheels, 4WD 12 mm hex

€34.49

Large-diameter wheels can change both the look and the handling of an RC build, and this 1:10 4WD wheel set XL does exactly that with 4 complete wheels in black and white. The 105 mm diameter and 65 mm width create a noticeably larger footprint that suits rougher ground and gives the chassis a more assertive visual presence. Inside each tyre, foam inserts are matched to the construction so the rubber is supported under load instead of folding over or rolling at speed. That internal support helps the tread stay more stable through acceleration, direction changes and uneven sections, which can make the model feel calmer and more predictable in motion. The set is built around 12 mm hex mounting, a widely used format that allows straightforward installation on matching wheel hubs. Compatibility is stated for Tamiya hex mounts, making the set a practical option for many established 1:10 4WD platforms. On loose surfaces such as sand or grass, the XL dimensions can help the model carry momentum with a broader contact area. On firmer ground, the same wheel size gives the chassis a fuller, more aggressive stance that changes the overall character of the build without altering the core layout.

RC Crawler

1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR

€249.99

The 1:10 X-Crawlee Pro 3.0 brings crawler driving into a 43.5 cm format built for rough ground, with a 270 mm width, 235 mm height and a weight of 2280 g that gives the model a planted stance on the trail. Its 100% RTR setup puts the focus on driving from the first session, while the 2.4 GHz remote control system keeps control inputs clear and direct. Power comes from the included 7.2 V NiMH drive battery with 1800 mAh, charged via the included 7.2 V / 1 A USB charger. At full capacity, driving time reaches up to 70 minutes, giving longer runs across stones, dirt tracks and uneven paths without frequent charging breaks. The controller is compatible with NiMH and LiPo batteries, which broadens battery choice for later setup changes. Full ball bearings support efficient running through the drivetrain, while the suspended rigid axles give the crawler the axle movement needed for slow, technical sections. The ready-to-run set includes the model, the radio system, the drive battery, the USB charger, 4 AA transmitter batteries and the manual. With a 14 years+ age marking and a single-vehicle setup, the X-Crawlee Pro 3.0 suits focused crawling sessions where line choice, throttle control and steering precision shape every climb.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 4WD 100% RTR

€199.99

The 1:10 XS Tekuro brings fast off-road driving into a 410 x 300 x 175 mm format with permanent 4WD, a high-torque 550 brushed motor and a top speed of up to 40 km/h. Grey and green bodywork, 110 mm monster tyres and a raised stance give the model a strong trail-ready presence before the first run even starts. Its drivetrain is built around a central steel cardan shaft, reinforced steel drive shafts at the front and rear, and metal differentials with steel bevel gears on both axles. Ball-bearing mounting throughout supports efficient running, while the XT60 high-voltage plug system and quick-change battery holder simplify battery swaps between sessions. The 8 kg steering servo uses a metal gearbox and water-protected construction, matched with splash-protected electronics and a water-protected 2.4 GHz radio system. The included 2600 mAh 7.4 V Li-Ion battery supports about 15 minutes of driving time, and the complete RTR setup keeps preparation focused on charging and heading out. At 1741 g, the chassis has the planted feel needed for dirt paths, gravel sections and uneven ground. Tight turns, short bursts of acceleration and repeated launch attempts all suit the Tekuro's mix of traction, suspension travel and wheelie-ready rear setup.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 2-Axle Boxed Trailer, model kit

€589.99

A 2-axle box trailer is a familiar sight in road freight, built to carry cargo in a closed body while keeping the load protected on the move. This 1:14 model kit brings that transport format into a detailed build with a laser-cut steel frame, a box body with CNC-milled aluminum parts, and the long, clean proportions of an enclosed trailer behind a tractor unit. The chassis uses 3 mm and 1 mm steel, while the bogie is formed from sheet steel in a sandwich structure. Wide chromated wheels run on ball bearings and carry wide tyres, and steel underride protection sits on the left and right sides. At the rear, an 8 mm aluminum bumper adds another machined metal detail, and a 1:14 trailer splash guard completes the lower section. The body measures 545 mm in length, 195 mm in width, and 290 mm in height, with a total weight of 4,800 g. Assembly is required, with a stated assembly time of 600 minutes. In use, the rear loading door opens on aluminum hinges through 270°, and magnets handle the door locking. Coupled behind a suitable 1:14 tractor unit, the enclosed body suits scale logistics scenes, articulated truck displays, and workshop builds that focus on metal construction, moving parts, and realistic trailer proportions. The kit includes instructions.

Models & trailers

1:14 2-Axle Dump Semi-Trailer, trailer

€589.99

Built in 1:14 scale, this 2-axle dump semi-trailer brings the look of a full-size tipper into a model-building format with a rigid PVC body, a CNC-milled aluminum frame and a 4-wheel layout. The silver dump body, black chassis and raised front platform create the working profile of a road-going bulk trailer, whether coupled to a tractor unit or parked on its support legs. The assembly kit focuses on mechanical detail rather than simplified styling. Vertical body panel lines, mudguards, rear underrun protection and ladder elements give the trailer a technical finish, while the king pin can be adjusted to suit the setup. The chassis uses new axles with 8 mm lift, and the rear section is shaped around a mechanically unlocking tailgate for realistic unloading action when a tipping function is installed separately. 7-chamber taillights and dummy air spring details extend the scale appearance across the rear and underside, and the ball-bearing wheel setup supports smooth movement during handling. On a workshop shelf, in a truck yard scene or behind a matching 1:14 tractor, the semi-trailer adds a strong construction-transport theme with visible engineering throughout the frame and body. Assembly kit and manual are included. A spindle drive, motor, battery, switch, radio gear, a charger and paints are required separately for expanded functions and finishing.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-Axle Dump Trailer, trailer kit

€519.99

The 1:14 2-Axle Dump Trailer brings working tipper style into a scale truck setup with a tandem-axle layout, a gray rigid PVC dump body and a steel profile frame with laser-cut, laser-welded construction. Built as an assembly kit, it focuses on the mechanical character of a real dump trailer, from the drawbar and support leg to the rear gate area and underbody linkage. The chassis uses 8 ball bearings across the wheel setup, giving the running gear a more precise feel as the trailer rolls behind a compatible tractor unit. Fulda Variotonn wide offroad tyres and the trailer axle with air ride dummy push the model further toward commercial-vehicle realism, while the 7-section tail lights add a recognisable rear-end detail. The automatic back wall locking with 2-hook design gives the rear section a functional finish that matches the tipper concept. The support leg keeps the trailer upright when detached, and the drawbar with hitch eyelet completes the classic central-axle trailer layout seen in heavy haulage scenes. On the bench, the kit offers a focused build around frame, axle and body assembly. Once finished, the trailer suits construction, transport and unloading scenes in 1:14 scale layouts, whether parked as a standalone model or coupled into a larger truck combination. Age 14 Years. Spindle drive, gear box motor, a control switch and paints are required separately.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-Axle Material Trailer, trailer kit

€574.99

Built for 1:14 truck scenes, the 2-Axle Material Trailer brings a long loading bed, twin-axle layout and working drop-side bodywork into a scale transport build with a clear commercial look. The grey panel sides, dark front bulkhead and wood-look floor give the trailer the character of a real material hauler, whether it is coupled behind a road tractor or parked at a loading point. The kit structure goes beyond a simple rolling chassis. The assembly sequence includes 2 axle units, a pivoted bogie, a main frame with crossmembers, mudguards, underride protection, rear bumper parts and upright posts around the bed. Ball bearings are fitted into each wheel hub, and the axle geometry offers normal height or a +8 mm position during assembly. Rear light housings are part of the build, and the manual also shows optional LED taillight boards as separate accessories. A spare wheel holder and additional fittings are listed as optional accessories rather than included contents. Once assembled, the trailer suits realistic loading and transport layouts in 1:14 scale, from building-material scenes to depot and yard setups. The opening side panels and rear section support a more active display style, while the detailed underframe, mudflaps and side protection parts give the finished trailer convincing presence from low viewing angles.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-axle Riedler, stanchion trailer

€509.99

The 1:14 2-axle Riedler stanchion trailer brings timber-haul detail into a scale transport setup with a steel sandwich frame, solid aluminium stanchions and a long, purposeful silhouette. At 620 x 190 x 305 mm and 2,600 g, the trailer adds real presence to a model road train while reflecting the look of the full-size Riedler vehicle named in the licence. Its mainframe uses 3 mm and 1 mm sheet steel parts that are laser cut and CNC bent, and the bogie follows the same sandwich construction for a consistent mechanical layout. The mounted bogie is adjustable and uses sliding pads to support manoeuvring through tighter course sections. A one-piece drawbar in fibre-reinforced plastic carries a chequer plate application and is held at a coupling height of 75 mm by 2 springs. The semitrailer axle includes dummy pneumatic springs, while the left and right underride guards and the CNC-milled rear bumper add further metal detail. The stanchion holders can be loosened with 2 grub screws, then repositioned or removed to suit different loading arrangements for logs or other long cargo. Ball-bearing mounted chromium wheels with wide tyres, mudguard splash protection, bumper mud flaps, a licence plate holder and 7-compartment rear lights build up the finished transport character. A decoration set is included. Age 14 Years. The Carson towing coupling 500907182 is required separately for use on the TAMIYA Volvo FH16 tractor unit.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 20Ft. Sea-Container, kit, trailer load

€199.99

Freight containers shaped modern transport with a standardised form built for road, rail and port handling. This 1:14 20Ft. Sea-Container Kit brings that familiar cargo silhouette into a scale truck setup with a 432 mm length, 180 mm width and 185 mm height. The structure combines an anodised silver aluminium frame with plastic sheet body sections that reproduce the look of a traditional container. Corrugated surfaces, corner details and the separate frame layout give the model the character of a working freight load rather than a plain box shape. The plastic panels are paintable, which supports custom liveries, fleet styling or a weathered finish that matches a chosen tractor unit and trailer combination. At the rear, the doors are movable and fitted with a locking mechanism, so the handling detail is part of the build rather than only a visual effect. The container is designed for the 2 axle container semi-trailer 500907334 and locks to the chassis via twist-locks. That mounting method reflects the technical logic of full-size container transport and helps the model sit naturally in logistics, harbour or long-haul display scenes. 14 Years marks the recommended age.

Models & trailers

1:14 20Ft. Semitrailer, trailer kit, tandem axle

€274.99

Built around a 1:14 scale layout, the 20Ft. Semitrailer kit brings container transport style into a detailed truck setup with a black anodised aluminium frame and a compact tandem-axle format. The 475 mm long chassis creates a clear, purposeful silhouette behind a tractor unit, while the 180 mm width and 135 mm height keep the proportions aligned with scale road-haulage scenes. The running gear combines swing axle suspension with flat springs, giving the underframe a more technical, model-engineered character than a plain static trailer base. Tyres with foam inserts add substance to the wheel setup and support a fuller tyre shape on the rims. Mechanical seat posts strengthen the parked semitrailer look at the front section and add another visible chassis detail for display or workshop scenes. The open kit format also leaves room for a container-focused build concept rather than fixing the trailer to a single body style from the outset. Coupled to a matching truck, the semitrailer suits freight yard layouts, road transport displays and scale driving sessions built around container handling themes. A suitable lamp set, 300056502, is available for builders who want to extend the trailer with matching light equipment. Age 14 Years

Models & trailers

1:14 3-Axle Flatbed Trailer III, trailer

€539.99

Heavy transport takes shape in 1:14 scale with the 3-Axle Flatbed Trailer III, a detailed kit built to pair with TAMIYA tractors. The long platform, solid front wall and multi-axle layout give the model the look of a working road trailer ready for oversized loads, machinery or palletised cargo. The chassis uses a laser-cut steel frame in 3 mm and 1 mm material, supported by a massive aluminium front wall and steel underride protection on the left and right sides. A bumper made from 8 mm aluminium adds another strong visual and structural element at the rear. The loading area measures 981 mm in length, with an overall width of 195 mm and height of 210 mm, giving the trailer a notably long deck in this scale. At 4,400 g, the assembled model carries a substantial presence on display and in convoy scenes. The new trailer suspension can be built at normal height or with the included +8 mm elevation, adding flexibility to the finished stance. The real wood deck surface and recessed fastening points suit scale freight setups, from construction loads to industrial transport scenes. Ball-bearing wheels support smooth rolling movement, while the spare wheel mounted in its steel holder strengthens the authentic commercial-trailer look. Age 14+ marks the recommended age. The trailer can also be expanded with separately available accessories, including a conversion kit with functional aluminium side walls for building-material transport.

Models & trailers

1:14 3-Axle Fliegl Megarunner, trailer kit

€634.99

Curtain-side trailers shape the look of modern road freight, and the 1:14 3-Axle Fliegl Megarunner brings that transport character into a detailed model-building project. The assembly kit captures the long, low stance of a European semi-trailer with a 995 mm length, a 195 mm height and a red curtain body that stands out clearly beside the white front and rear sections. The build centres on a laser-cut steel frame, steel front wall and 3-axle layout, creating a technical structure with the layered detail that model-building enthusiasts look for in workshop sessions. Along the sides, the curtain body is tensioned with multiple fasteners, while the rear section uses opening doors with a 270° hinge layout for a more authentic trailer finish. Half-round mudguards, a single-arm steel spare wheel carrier and aluminium underride protection add the kind of hardware normally seen underneath full-size transport equipment. The rear bumper carries a laser-cut Fliegl logo, and the wide tyres with chromed rims complete the road-going stance with a bright contrast against the darker chassis parts. On a shelf, in a depot scene or coupled to a 1:14 tractor unit, the trailer adds a strong logistics presence through its triple-axle proportions and curtain-side bodywork. The kit format makes the construction itself part of the appeal, with the manual included for step-by-step assembly.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Low Loader, trailer, gooseneck

€849.99

Heavy-haul trailers are defined by their proportions, and this 1:14 3-axle low loader captures that look with a long low-bed platform, a stepped gooseneck front section and a rear triple-axle group. The red frame, wood-look centre deck and black running strips create the technical contrast seen on full-size transport equipment, whether the trailer is coupled to a matching tractor unit or shown as a standalone workshop build. The construction goes beyond a simple shell. The manual shows 6 wheel assemblies with ball bearings, a multi-part frame with cross members in 74 mm and 81 mm lengths, and deck sections that lock into place across the chassis. Rear details such as warning boards, mudflaps, lights, hazard markings and LONG VEHICLE graphics build the road-going character of the model. The trailer also supports optional upgrades including a spindle drive gearbox motor, a control switch for the lifting mechanism, LED tail light boards, rectangular lights and an orange flashing beacon. On a finished 1:14 truck combination, the low central bed suits scale transport scenes with construction machines, agricultural vehicles or other oversized loads. The long deck and realistic rear section also make the model a strong centrepiece for shelf display, depot layouts and heavy-transport dioramas. Required separately are a gearbox motor for the lifting device and a control switch for manual lifting.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Semi-Trailer Ver.III, trailer

€689.99

The 1:14 3-Axle Semi-Trailer Ver.III recreates the long, enclosed form of a box trailer with a white body, red chassis and a detailed 3-axle layout that gives a truck combination a convincing road-going presence. Extended support legs at the front let the trailer stand detached, while the wide rear opening sets up loading scenes with the doors swung fully outward. Details across the chassis and body focus on the hardware that defines a working trailer. The side panels use a screwed sandwich-look construction, and the semi-circular mudguards frame the rear wheel area with a clean commercial-vehicle profile. At the back, an aluminum rear bumper carries 7-section taillights for a technical finish that matches the transport theme. A steel spare wheel holder with spare wheel adds another workshop-style detail to the underframe, and the manually adjustable aluminum trailer support legs underline the functional character of the model. Combined with a compatible 1:14 tractor unit, the trailer suits realistic freight setups, depot scenes and road-train display builds. Open rear doors, visible cargo space and the multi-axle chassis also make it a strong centrepiece for transport layouts focused on loading bays, yard parking and long-haul combinations. Age 14 years+  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Stanchion Trailer, logging trailer

€599.99

Built around a 1:14 scale and a 3-axle layout, this stanchion trailer brings the look of a dedicated timber hauler into a detailed model format. The red chassis, silver stanchions and black fenders create the unmistakable profile of a forestry transport trailer, with the long frame set up to carry elongated loads such as logs or poles in a convincing road-going arrangement. The structure develops through a multi-stage build with 6 wheel assemblies, ball bearings in the wheel hubs and 3 axle units mounted beneath the frame. The suspension uses a new design, and the axle build includes a choice between normal height and a raised +8 mm position. Dummy air suspension details add another layer of scale realism around the running gear. Side underrun guards, a rear bumper, rear light details and a front holder with front plate shape the trailer into a complete heavy-transport subject rather than a simple rolling chassis. On the bench or coupled into a 1:14 truck setup, the trailer suits display scenes centered on forestry, construction or long-load transport. Support legs hold the trailer upright when parked, while the front bulkhead and paired stanchions define the loading zones clearly for a purposeful finished look.

RC truck accessories

1:14 3-Chamber Taillight PCB, RC lighting set

€80.99

Compact rear lighting adds a sharper scale finish to 1:14 vehicle builds, and this 3-chamber taillight PCB set brings that detail into a small round format. With dimensions of 11 x 7.5 mm, the units suit model bodies and rear sections where lighting needs to stay visually balanced instead of overpowering the build. The PCB layout combines 3 light functions in each taillight: rear light, indicator and brake light. That function mix supports more lifelike signalling on trucks, trailers and custom conversions, while the round housing shape fits classic rear-end styling on many commercial vehicle projects. The set is designed for an input voltage of 7.2-12 V DC, making it suitable for RC electrical systems within that range. For model-building enthusiasts, this adds a focused electronics upgrade that contributes visible function as well as scale character. Installed on a 1:14 rig, the taillights help complete the rear view during workshop builds, restoration-style projects or detailed road-going truck scenes. The set is not compatible with TAMIYA MFC-01/03, so it is best matched with other suitable lighting layouts and custom electronics setups.

Models & trailers

1:14 3Axle Trailer Chassis Ver.III, trailer

€389.99

The 1:14 3Axle Trailer Chassis Ver.III captures the look of a heavy road trailer in a format shaped for model-building enthusiasts. Its laser-cut steel construction uses 3 mm and 1 mm sections, creating a rigid base chassis that suits custom builds and gives larger trailer bodies a defined structural foundation. The 3-axle layout brings the long proportions of a transport trailer into a scale setup that looks convincing behind a truck tractor. A new trailer suspension system is part of the chassis design, and the included +8 mm elevation option allows the running height to be adapted to the planned structure above. Wide chromed wheels with ball bearings and wide tyres underline the technical look while supporting smooth rolling movement. At the rear, an aluminium bumper with 7-section taillights adds another recognisable truck detail. The steel spare wheel holder with spare wheel extends the workshop-style equipment, while the semi-circular mudguards shape the wheel area with a clean trailer silhouette. As a basic trailer chassis for individual structures, this version leaves room for flatbed, transport or specialist body concepts built around the frame. On a shelf, in a workshop setting or coupled to a matching 1:14 tractor unit, the long red chassis and detailed under-run protection create a strong heavy-haul presence.

RC truck accessories

1:14 4-in-1 LED Distrib.Board, model accessory

€9.99

Lighting details often define the final character of a scale build, and this 1:14 4-in-1 LED Distrib.Board is made to bring order to that stage of the setup. With 10 outputs on one board, it creates a central connection point for several LED positions within a 1:14 model and supports a tidier internal layout than separate loose branches. The board is designed as a model accessory in the Carson Modelsport range and focuses on the practical side of adding electronics to a build. Its 4-in-1 distribution concept helps separate and organise multiple light connections when a cab, body or chassis carries more than one lighting point. That makes it useful for projects where front, rear or additional marker lights need a defined place in the wiring plan. The compact board format also suits hobby work where available installation space inside a scale model is limited and every connection needs a clear route. In workshop use, the board fits naturally into the finishing phase of a 1:14 build or an upgrade of an existing model. Minimum age 14 years is stated for this accessory, matching hobby projects that combine scale detailing with electronic equipment.

Additional accessories

1:14 Box Body Conversion Kit, model kit

€399.99

This 1:14 box body conversion kit reshapes the TAMIYA Volvo FH16 timber truck 300056360 into an articulated truck with a closed cargo body. CNC-milled aluminium parts form the main box structure, while the combination of metal sections and panelled surfaces gives the finished build a purposeful commercial-truck character. A sheet steel subframe, laser cut and CNC bent, is included for mounting on the chassis and creates the structural link between the conversion and the base vehicle. The side sections use screwed plastic panels in a sandwich layout, which adds visible layering to the bodywork instead of a plain flat-sided shell. At the rear, the loading doors are carried on aluminium hinges with a 270° opening angle, allowing the opening mechanism to be shown clearly on the completed model. Magnetic locking keeps the doors closed when the body is in running or display condition. The assembled body measures 545 x 195 x 195 mm and weighs 3,200 g. As a model kit, this conversion suits hobby builds that focus on reworking an existing truck into a different transport configuration. The box body changes the visual character of the Volvo FH16 from timber hauler to enclosed freight carrier and adds a substantial new body section for workshop assembly and finishing.

RC truck accessories

1:14 Chrome Bumper MB 1838/1850, truck part

€12.49

Classic truck styling often comes down to the front details, and this 1:14 Chrome Bumper MB 1838/1850 adds a bright plated accent to compatible model builds. Designed as an accessory for Mercedes Benz truck models 56305 and 56307 from Tamiya, it brings the specified MB 1838/1850 look to the front section in a format matched to 1:14 scale projects. The bumper is made from chromed material and focuses on exterior appearance rather than a generic replacement look. Its shaped front profile and integrated mounting points are intended for the named compatible truck models, which keeps the fitment use clearly defined in the product data. The included fixing hardware consists of 2 black screws, giving the set the essential parts needed for installation. As a model accessory in the Models Supplies range, it suits detail-focused truck projects where the front end finish plays a visible role in the overall build. On a workshop bench, the plated surface adds contrast against painted cab parts and darker chassis components. In a display setting or as part of an active RC truck build, the bumper helps complete the characteristic road-truck appearance associated with the MB 1838/1850 designation.

RC chassis & attachments

1:14 Clearance Lights, model accessory, 2 pcs

€11.49

Marker lights are a small detail with a big visual role on scale trucks, and this 1:14 clearance light set brings that road-going look into a model build with red and amber lenses. The set contains 2 pieces and is listed as a model accessory for hobby use. Its compact format suits detailing work where edge markers help define the outline of a cab, body or trailer in scale form. The red and amber colour combination follows the stated design and creates a clearer visual break between body panels and fitted trim. As a separate accessory, the set can support a fresh build, a repair, or the replacement of existing marker parts where the original look needs to be restored. The 1:14 scale keeps the proportions aligned with matching model projects rather than forcing an oversized lighting detail into the build. On the bench, the set fits naturally into finishing stages where small exterior parts shape the final appearance. In display use, the coloured markers add another layer of realism to trucks and trailers that rely on visible body details rather than large mechanical changes alone.

RC truck accessories

1:14 Clearance Lights, model accessory, 2pcs

€11.49

Marker lights are a small detail with a strong effect on the finished look of a scale vehicle, and this 1:14 clearance light set brings that effect into model builds with a red and white 2-piece layout. The compact format suits focused detailing work on truck and trailer bodies where visible light points help define the lines of the model. The set is listed as a model accessory and is aimed at hobbyists from 14 years. Red and white light elements open up classic placement options on body edges, upper sections or rearward areas, depending on the build concept and the styling of the vehicle. Because the pack contains 2 pieces, the set works well for selective upgrades rather than broad full-body outfitting. That makes it a useful choice for custom projects, replacement work or finishing touches on a scale body that still needs clearly placed marker-light details. On the workbench, the accessory can be integrated into truck, trailer or other 1:14 modelling projects where small exterior parts shape the overall impression. In display use or during driving sessions, the added light housings help the bodywork read with more scale definition and a more complete road-going look.

RC truck accessories

1:14 Day Running Light Actros 2/3 Axle

€65.99

The MB Actros remains one of the defining shapes in modern long-haul trucking, and this 1:14 daytime running light set brings that road-going character into a scale build with a model-specific front lighting detail. Made for MB Actros 2/3 Axle models, the set focuses on the visual signature at the front end and adds a cleaner, more technical look to the truck body. The accessory is designed as a paired lighting set with wired left and right units, matching the mirrored layout needed for the vehicle front. Its 7.2 to 12 V/DC input range gives clear electrical guidance for integration into compatible RC truck systems. The compact housings are shaped for installation as dedicated light components rather than as generic decoration, which makes the set especially relevant for builders refining the appearance of an existing model or replacing front lighting parts with the correct format. On a workshop bench, during a rebuild, or as part of a scale detailing session, this lighting set adds a focused upgrade to the MB Actros 2/3 Axle platform. It suits display-oriented finishing as well as active RC truck projects where the front-end layout matters as much as the driving setup.

RC truck accessories

1:14 Draw Tube Pole Trailer, model accessory

€89.99

This 1:14 Draw Tube Pole Trailer accessory set brings a functional trailer detail into model-building projects with a long cylindrical draw tube, a rectangular silver housing section and an angled mounting plate with 4 round holes and 2 elongated slots. The layout reads as a dedicated add-on for scale truck or trailer work, with each part focused on mounting, alignment and visible structure rather than decoration alone. Alongside the main tube section, the set includes 2 small silver detail parts, a black bracket and a bag of black and silver screws for the fitting work. The combination of slotted and round mounting points supports careful positioning during assembly, while the separate hardware keeps the installation tied to the mechanical character of the build. A red transparent 2-part light piece and a clear lens frame extend the set beyond the structural section, adding a realistic rear-end detail that complements the metallic-looking components. 14 Years is the stated age marking. On a workshop bench, the parts suit upgrade, replacement or custom trailer projects where a scale-correct extension section matters as much as the finished look. Assembly time is stated in minutes, and batteries are not included.

Models & trailers

1:14 Dump Trailer 2/3 Axle, model kit

€619.99

Built for model truck scenes with real working character, this 1:14 dump trailer model kit brings the look of a construction-site semi-trailer into a detailed three-axle format. The combination of a CNC-milled aluminium chassis, reinforced PVC basin and back wall, and a lightened licence plate mount gives the trailer a technical, workshop-style finish that suits display builds and active driving alike. The running gear uses GFK suspension with horizontal rods, 12 ball-bearings, 6 wide rims and 6 wide tyres with a width of 25 mm and an outer diameter of 82 mm. Air-spring dummies with screw springs add another layer of scale detail to the undercarriage, while plastic fenders with mounts frame the wheel setup cleanly. The aluminium underbody protection and the CNC-milled support construction continue the metal-focused build, and the mechanically adjustable trailer supports add a functional detail at standstill. With a length of 700 mm, width of 185 mm, height of 235 mm and a weight of 4,600 g, the trailer has substantial presence in a 1:14 truck setup. For unloading scenes, the basin can be equipped with a separately available dump mechanism. A spindle drive, motor, battery and switch are required separately. Once fitted, the raised basin and automatic rear locking create a convincing loading and unloading sequence for sand, gravel or stone in construction layouts, quarry scenes or truck meeting displays.

Models & trailers

1:14 Fliegl Stone Master, tipper trailer

€749.99

Current half-pipe tippers are defined by fast unloading and a hard-working silhouette, and the 1:14 Fliegl Stone Master brings that character into a detailed 3-axle trailer kit. The licensed model combines a steel chassis frame with a steel tipper body and rear wall, creating a substantial build with the long, purposeful proportions of a site trailer. The chassis uses laser-cut and laser-welded 1 mm and 3 mm steel parts, while the tipper and hatch door are formed from 2 mm steel with a CNC-bent profile. Across the running gear, 12 ball bearings sit inside the 6 wheel assemblies for smooth rolling action. The trailer suspension is detailed with air spring dummies, and the rear section carries a 7-section taillight layout, a licence plate bracket and a square steel rear underride guard. Semi-circular mudguards, a king pin, an ABS operating platform and a hydraulic cylinder dummy add further scale detail without crowding the lines of the body. The 7-section rear light cluster can be electrically retrofitted. With dimensions of 700 x 185 x 250 mm and a load figure of up to 10 kg, the trailer has the size and carrying capacity to suit construction layouts, transport scenes and scale hauling setups. The body can be tipped and unloaded with the separately required tipping mechanism. A spindle drive, motor, battery and switch are required separately.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 Goldhofer TU4, lowloader trailer, 4-axle

€694.99

Heavy-haul lowloaders are built to move machinery that sits too tall or too heavy for a standard trailer, and the Goldhofer TU4 captures that purpose in a long 1:14 scale platform with a distinctly low deck and 4-axle layout. This kit uses laser-cut steel sheet parts to create the frame and structure, giving the model a technical build with the look of a real transport trailer. The deck is finished with wood supports that break up the steel construction with a realistic loading surface, while 16 ball-bearing wheels add a dense multi-axle stance under the chassis. At the rear, the support can be adjusted manually, and the one-piece ramps connect through a hinged mechanism that allows different loading positions. The underframe includes spacers, semicircular fenders and a pivoting bogie arrangement, adding more mechanical detail during assembly than a simple display trailer. Decals are included for markings and finishing touches, so the completed model carries the visual character of a working lowloader rather than a plain platform. Coupled behind a matching 1:14 tractor unit, the trailer suits workshop display, transport dioramas and scale loading scenes with construction or agricultural vehicles. Age 14 Years. Assembly instructions are included.  Warning! Not suitable for children under 14 years.

RC truck accessories

1:14 Lift Axle, conversion kit, trailer upgrade

€99.99

A lift axle is a defining detail on many full-size trailers, and this 1:14 conversion kit brings that function into a scale workshop project for CARSON 3-axle trailers of the II and III generation. Built for one trailer axle with dummy air suspension, the set converts it into a working lift system with a clearly visible axle movement of about 6 mm. The mechanism is driven by a digital servo and uses an aluminum servo mount, an aluminum servo horn, new mounting brackets, air bellows and mounts, plus a steel lift mechanism to create the lifting action. Mounting hardware is included for the installation. A suitable servo with at least 10 kg torque is required separately; comparable dimensions are 40 x 20 x 38 mm. The kit is compatible with Fliegl Megarunner, Stake trailer III, Flatbed trailer III, Trailer chassis III, Building materials trailer III, Box trailer III, and all 2nd generation trailers. Installation in tipper models is not possible. On a finished trailer, the raised axle changes the stance in a way that looks closer to a working road-going combination. In the workshop phase, the conversion adds a focused mechanical upgrade that suits model-building enthusiasts who enjoy functional trailer details as much as the final appearance.

RC truck accessories

1:14 Metal Front Axle, model part, steering

€19.99

A front axle defines both the stance and the steering layout of a scale truck build, and this 1:14 metal front axle with steering linkage brings those two core elements together in one dedicated model part. The metal construction gives the assembly a clearly specified material base for workshop use, while the included linkage ties the axle directly to the steering function named in the designation. Within a 1:14 build, a front axle is more than a visual detail: it is the component group that shapes how the front end is assembled and how the steering hardware is organised. This version is supplied as a front axle with steering linkage rather than as an isolated single piece, which helps keep the relevant steering section together for replacement or planned parts work. The designation identifies it as a model supply within the models and accessories range, making it a focused choice for maintenance benches, rebuild projects or scale-oriented truck assemblies. The age marking is 14 Years. Whether the task is replacing a worn front-end assembly, preparing a fresh chassis project or refining a detailed 1:14 vehicle, this axle fits naturally into hands-on hobby work. It suits model-building enthusiasts who value clearly defined components and a steering assembly that is named upfront in the specification.

RC truck accessories

1:14 MFC-TLS IR Low Loader, control unit

€84.99

Built for 1:14 truck modelling, the MFC-TLS IR Low Loader control unit extends TAMIYA MFC-03/01 with infrared signal transfer to a matching trailer setup. The module sends lighting and auxiliary commands from the tractor unit to the trailer, creating a clean functional link for low loader combinations with steerable axles. Power is supplied via the receiver at 5-7.4 V/DC, so the module integrates into an existing radio-controlled electronics layout without a separate power source stated in the data. Rear light circuit boards for 3-chamber or 6-chamber taillights connect through screw terminals, and each of the 7 outputs supports loads of up to 500 mA. That layout also leaves room for additional lamps such as marker lights, roof lights or wind deflector lights, which are switched through the parking light function. The package contents include the MFC IR transmitter module, an IR transmitting diode and a 5-pin cable set. In a detailed truck and trailer build, the unit supports coordinated light behaviour and extra driven functions across the combination. The control paths also cover steering-related trailer functions, making it suitable for low loader setups where steerable axles add a more involved operating sequence. Recommended age: 14 years. The TLS low loader control unit 500907712 is optionally required for the trailer.

RC truck accessories

1:14 Scania 770 Roof Lights, model accessory

€16.49

The Scania 770 stands out on the road with its tall cab format and strong front-end presence, and this 1:14 roof light board brings that character into a scale truck build with a focused lighting detail. Designed as a model accessory, it places 5 LED roof lights across the upper cab area to create a more defined silhouette on the finished Scania 770. The one-piece board format groups the 5 lights into a single roof-mounted assembly, which helps keep the layout consistent across the cab line. As a 1:14 accessory, it is shaped for scale modelling work where body styling and truck-specific detailing matter as much as the main chassis. The LED configuration adds a technical accent to the upper section of the model and gives the roof area a clearer visual structure than an unadorned cab top. The Scania 770 reference keeps the styling tied to a named truck subject rather than a generic lighting add-on. On the bench, the light board fits naturally into a detailed truck project alongside cab finishing and exterior upgrades. In display use or during scale driving sessions, the 5-light arrangement gives the model a more distinctive roofline and a stronger long-haul truck character.

RC truck accessories

1:14 Scania 770S Front PCB, truck lighting

€189.99

Modern long-haul trucks rely on their front light signature as much as on grille shape, and the Scania 770S is one of the clearest examples of that design language. This 1:14 front PCB lighting set translates that look into a dedicated lamp assembly for the TAMIYA Scania 770S, combining reflector detailing with functional illumination for a more authentic scale finish. The set is built around 2 matching front light modules with integrated wiring and PCB-based electronics. Each housing contains 16 LEDs, arranged to reproduce the reflector structure with a more realistic visual depth than a plain lamp insert. The lighting functions include daytime running light and side position light, adding separate illuminated zones that sharpen the truck's front profile. The specified input range of 7.2 to 12 V DC suits RC truck electrical systems in this class and gives clear compatibility guidance for installation planning. Mounted on the model, the lamp units bring more definition to the front corners, whether the truck is standing in a workshop-style display or running on an indoor course. For 14 Years and up, this accessory adds a technical finishing step that suits hobby builds focused on scale detail and working light functions.

RC truck accessories

1:14 Scania 770S LED Board Side, model part

€31.99

This 1:14 side LED board set is made for Scania 770S model builds and brings a defined lighting component to the truck's side sections. With 2 matching boards in the set, the layout suits symmetrical installation and gives the model a more complete illuminated appearance. The designation names a 3A specification, adding a concrete electrical reference for integration into a compatible lighting setup. As a dedicated model accessory rather than a complete vehicle, the set focuses on one specific area of the build and supports more detailed finishing work on a Scania 770S project. The side board format helps separate this component from front or rear lighting elements and makes it easier to plan placement within a larger 1:14 truck configuration. In a workshop setting, the pair can be fitted during a fresh build or used to refine an existing Scania 770S model with added side illumination. The clearly defined scale and vehicle reference also make the set a focused choice for hobbyists working on truck detailing with matching 1:14 components.

RC truck accessories

1:14 Scania 770s LED Board, model accessory

€32.49

The Scania 770 S belongs to the latest generation of long-haul trucks, known for its bold front design and strong road presence. This 1:14 LED board is made for that look in model form, adding a defined lighting element to the front area of a Scania 770s build. The accessory is specified as a 4+3 front LED board, giving model-building enthusiasts a clear layout for cab detailing rather than a generic light part. In a 1:14 truck project, details at the grille and roofline shape the whole character of the finished replica, and this board focuses attention on that upper front section. The Scania 770s designation keeps the part tied to a specific subject, which matters when a build is planned around the lines and proportions of one truck model. As a model accessory rather than a complete vehicle, it suits hobby benches where selected parts are added step by step to develop a more individual finish. Whether the goal is a shelf display, a show-style truck replica, or a running 1:14 build with extra visual definition at the front, this LED board adds a distinct custom element. The compact format also makes it a useful choice for targeted upgrades where one visible detail can change the overall impression of the cab.

RC truck accessories

1:14 Scania 770S Positionlight Set, LED kit

€85.99

The Scania 770S is known for its bold front-end presence, and this 1:14 position light set translates that character into a dedicated LED upgrade for scale truck builds. With 21 LEDs and support for 7.2 V and 12 V systems, the set is aimed at model-building enthusiasts who want to add a more intricate lighting layout to a Scania 770S project. The wiring harnesses are arranged for several mounting points around the truck body, with light outputs assigned to roof lamps, side skirt position lights and multiple front lighting locations. Alongside the roof position lamps with high beam function, the set also covers 5 lightbar pods, a bumper lightbar and an auxiliary light in the radiator grille. This spreads the illumination across upper, central and lower sections of the cab, giving the model a more structured and realistic light distribution once installed. The prewired LED lines also support neat routing through a detailed truck build where cable placement matters as much as the finished effect. On a display shelf, in a workshop build, or during powered running sessions, the set adds visible definition to the Scania 770S bodywork and helps separate the truck's key styling zones through light placement. The set is not compatible with TAMIYA MFC-01/03.

RC truck accessories

1:14 Steel Drive Shaft 47-57 mm, model part

€17.49

A steel drive shaft in 1:14 scale format brings a core drivetrain component to compatible model vehicle builds. The stated 47-57 mm length range defines the working span clearly, making this part relevant wherever that exact distance is needed between connected drivetrain points. As a model accessory in the Models & Accessories range, this shaft is aimed at repair, replacement, or planned drivetrain setup work rather than decorative use. The steel construction places the focus on a metal transmission part for hobby applications, and the compact 47 mm to 57 mm specification gives a concrete reference when matching an existing assembly. With a minimum age marking of 14 years, the part sits in a hobby context shaped by model-building and technical maintenance. The designation itself keeps the function straightforward: drive shaft, steel construction, 1:14 scale reference, and a defined length window. On the workbench, this kind of spare part supports routine servicing of compatible RC models, whether an existing shaft is being replaced or a drivetrain layout is being completed with the required size. It also fits neatly into a stocked parts assortment for ongoing maintenance of 1:14 vehicle projects.

RC truck accessories

1:14 Steel Drive Shaft, model part, 40-45 mm

€17.49

This 1:14 steel drive shaft is a compact model part for driveline setups that need a stated length range of 40-45 mm. The steel construction and scale-specific designation give model-building enthusiasts a clear starting point for matching the part to an existing build or replacement task. Within a model workshop, a drive shaft sits at the heart of mechanical power transfer, linking rotating components in the drivetrain. Here, the key data stays focused and usable: 1:14 scale reference, steel material, and a 40-45 mm size range. That makes the part easy to place in projects where a short shaft section is required and where the dimensions need to be checked against the installed layout. The concise specification also suits spare-parts planning, because the material and size can be identified quickly without sorting through broader vehicle claims that the data does not state. Whether the task is replacing a worn shaft in a running model or selecting parts for a fresh chassis setup, this component brings the essential information into one straightforward format. The 40-45 mm range supports comparison against existing hardware, while the steel build keeps the focus on a concrete, named material for hobby use.

RC truck accessories

1:14 Steel Drive Shaft, model part, 75-100 mm

€17.49

This 1:14 steel drive shaft is a dedicated drivetrain part for model assemblies that need an adjustable connection length from 75 to 100 mm. The steel shaft brings a clear mechanical role into the build, linking compatible drivetrain points within that stated span and supporting a precise, component-led setup. In a 1:14 model context, the 75 to 100 mm format gives room for installations where the distance between connected parts is not fixed to a single length. That makes the shaft relevant for replacement work as well as for fresh assemblies built around matching dimensions. The steel construction keeps the focus on the part's intended function as a drivetrain link rather than a decorative add-on. With the age marking of 14 Years, the part sits in a hobby-focused model range shaped around detailed builds and technical component choices. Whether used to replace a worn drivetrain link or to complete a compatible 1:14 project, the shaft fits naturally into workshop-style model building sessions. It suits hobby benches where measured component selection, matching dimensions and drivetrain layout all matter to the finished assembly.

RC truck accessories

1:14 Steering Axle, truck accessory, steel

€99.99

In 1:14 truck building, the steering axle shapes how the whole front end responds on the road. This pre-assembled front axle combines a hardened steel center section, hardened steel steering knuckles and aluminum linkages into a ready-to-install unit for TAMIYA truck models. The axle body forms the core of the assembly, while double plain-bearing-mounted steering knuckles support precise steering movement at each side. A steel tie rod with left- and right-hand threads allows fine tracking adjustment directly at the linkage, which helps dial in the front end with more control during setup. Backlash-free M3 ball joints transfer the steering motion through the system with accurate, direct action. The combination of steel load-bearing parts and aluminum linkages gives the assembly a focused mechanical layout built around steering precision. Installed on compatible TAMIYA truck chassis, the axle suits fresh builds, rebuilds and targeted front-end upgrades where exact steering response matters. The ready-for-installation format also keeps workshop time focused on fitting and setup rather than on assembling the axle itself.

RC truck accessories

1:14 Strobe Light orange, model accessory, 2 pcs

€45.99

Amber warning lights are a familiar detail on working trucks, and this 1:14 strobe light set brings that look into a model build with 2 compact light units. Each housing measures 11.5 x 4.5 x 2.5 mm, giving the set a small footprint that suits scale installations where lighting needs to stay in proportion to the bodywork. The lights are designed for 7.2-12 V DC input and come as orange strobe units for model electrics in that voltage range. The image shows slim silver housings with attached wires, a layout that supports installation on body sections, roof areas or accessory bars where a separate warning-light detail is needed. Compatibility with the 500907633 beacon light bar set makes this set a focused extension for existing 1:14 truck lighting projects rather than a generic decoration. Used on a show truck, service vehicle or detailed working rig, the 2 strobe lights add a distinct visual accent that sharpens the scale appearance. In custom builds, restorations or lighting upgrades, the compact format leaves room for precise placement while the amber colour reinforces the look of real commercial vehicle warning equipment.

Basic accessories

1:14 Towing bar Low loader, model accessory

€26.99

This 1:14 towing bar for the Low loader adds a defined structural part to scale model work, with a black moulded form that follows an A-shaped layout and integrates reinforcing ribs across the frame. The geometry shown in the part itself points to a mechanical connection role, with 1 circular mounting eye on one end and 2 cylindrical mounting points on the other for placement in the intended assembly. As a dedicated model accessory in the Models & Accessories range, the part suits replacement work, maintenance tasks or the completion of an existing 1:14 Low loader setup. The ribbed structure gives the component its formed profile, while the open triangular shape keeps the connection points clearly accessible during fitting. For hobby projects where the correct shape matters, a scale-specific part like this helps keep the model configuration consistent with the intended layout. The 14 Years age marking places the towing bar in the hobby segment rather than in early-play ranges. It fits naturally into bench work focused on repair, parts management and scale vehicle upkeep, whether the aim is to replace a worn component or keep a matching spare ready for later use.

Basic accessories

1:14 Towing Bar Trailer, model accessory

€26.99

The 1:14 Towing Bar Trailer is a model accessory with a clear utility-focused shape for scale vehicle and trailer projects. Its black moulded form combines a long drawbar arm, a circular eyelet and a broad triangular centre panel, creating a part that reads immediately as a towing or linkage component within a larger assembly. The centre section carries a raised diamond-plate texture that gives the surface an industrial look suited to working vehicle scenes and technical model layouts. Along one side, small mounting tabs with holes add further fastening points, while the two extending arms end in compact connector joints for attachment within a compatible structure. This combination of eyelet, tabs and connector ends supports use as a linking, hinging or stabilising element, depending on the model setup described by the builder's own project. The 1:14 scale keeps the part aligned with matching scale builds where proportion matters. In workshop-style rebuilds, replacement jobs or custom trailer configurations, this accessory brings a distinct mechanical detail to the assembly. It suits hobby benches where individual components are selected for fit, function and scale appearance rather than as stand-alone display pieces.

Models & trailers

1:14 Trailer Chassis 20/40ft.Cont., trailer

€399.99

Built around a CNC-milled aluminium frame with a black anodised finish, this 1:14 Trailer Chassis 20/40ft.Cont. brings container transport into a detailed scale format with a long 915 mm silhouette and a purposeful commercial-vehicle look. The 190 mm width and 140 mm height give the chassis a low, stretched profile that sits naturally behind a matching tractor unit in workshop, display or driving scenes. The 3-axle layout is paired with swing axle suspension and flat springs, so the undercarriage carries visible mechanical depth as well as articulated movement. Wide-base tyres with foam inserts add body to the running gear, while chrome-plated rims sharpen the road-going finish. Mechanical seat posts extend the functional trailer character beyond surface styling, and the changeable container fastening allows the chassis to be set up for 20 ft or 40 ft container formats. Age marking: 14 years. Behind a tractor unit, the long frame and multi-axle arrangement create the look of a working freight combination with clear transport focus rather than a generic road trailer. The chassis suits model-building enthusiasts who enjoy realistic commercial vehicle themes, detailed underframe construction and scale scenes centred on loading, hauling and depot movement.

Basic accessories

1:14 Trailersus. 8mm Lift, trailer axle parts

€29.99

A 1:14 trailer model gains a more technical underbody look with this Trailersus. set and its 8 mm lift layout. Created for retrofitting existing trailer axles with dummy air springs, the set brings the suspension area closer to the visual character often sought in detailed truck and trailer builds. The package contains the necessary moulded parts and 2 air bellows for the conversion. It is intended for use with dummy air springs 500907069, while the metal parts and the assembly material are reused from the existing axle. That setup keeps the focus on the suspension components that change the appearance of the axle assembly, rather than replacing the complete axle hardware. The black moulded parts suit workshop-style builds, restoration projects, and scale trailer customisation where the axle zone is meant to look more complete. One set is required for each trailer axle, which helps when planning a single retrofit or equipping several axles on a longer trailer. The 14 Years marking is stated in the product data. In a display build or a running truck-and-trailer combination, the conversion adds a more model-focused finish to the area beneath the trailer body.

RC truck accessories

1:14 UNI-TLS IR, transmitter unit, low loader

€84.99

Heavy-haul trailer functions become far more precise with the 1:14 UNI-TLS IR transmitter unit, built to connect an existing lighting system to the CARSON TLS low-loader control setup. The module sends both lighting and auxiliary commands to the trailer via infrared, creating a clean control link for complex low-loader operation. Designed for third-party use, the unit expands a 1:14 electronics layout with a focused set of control options for articulated transport models. The infrared transmitting diode forms the signal bridge to the trailer control unit 500907712, which is required separately for trailer control. Alongside standard light commands, the system supports additional switching tasks for functions such as a gooseneck section, electric supports, ramp drive or steerable trailer axles. Operating voltage is 5-7.4 V DC, and power is supplied directly via the receiver. Scope of delivery includes the UNI transmitter module, IR transmitting diode, 10-pin cable set and instructions. In a workshop-style build or an active driving layout, the module suits model hauliers who want trailer lighting and moving low-loader functions to respond through one coordinated infrared link. It fits especially well into detailed truck and trailer combinations where realistic control of transport equipment matters as much as the tractor unit itself.

RC truck accessories

1:14 Warning Signs LED TLS, trailer accessory

€54.99

Heavy haulage details make the difference on a scale build, and these 1:14 warning signs bring that look into the trailer setup with illuminated red and white SMD LEDs. The set contains 4 warning signs ready to connect, adding a functional lighting element that suits low-loader scenes and transport-focused model layouts. The pre-wired power circuit board keeps the electrical side straightforward and is designed for direct connection to the TLS low-loader control unit 500907712. Installation uses the existing mounting points on the CARSON gooseneck low-bed trailer 500907700, which keeps the fit aligned with the intended trailer platform. Each sign measures 21 x 21 mm with a width of 71 mm, giving the assembly a compact scale presence. The extendable construction can be moved in or out by loosening the screws, so the sign position can be adapted to the width of the load. Mounted on a low-bed trailer, the illuminated signs add a convincing finishing touch to heavy transport combinations in workshop builds, display setups, and driving sessions. The 5 V/DC operating voltage matches the stated electrical specification for integration into the TLS system.

Tyres & rims

1:14 Wheel Wide Trailer Wheels, Chrome Rims

€26.49

Chrome truck rims are a classic detail on full-size road trailers, and this 1:14 wheel set brings that look into a scale build with a wide format made for trailer use. The set includes 2 wide trailer wheels with a chrome finish, giving compatible models a brighter, more defined wheel appearance on the axle. The wheel design is intended for CARSON-MODEL SPORT trailers and suits rebuilds, replacements or visual upgrades where the running gear needs a fresh matching look. Each rim is specified for use with 5 x 11 x 4 mm ball bearings, which gives the assembly a clear bearing standard for fitting and maintenance. The wide profile supports the visual character expected from scale transport trailers, while the chrome surface, vent openings and shaped hub area add mechanical detail that stands out on the undercarriage. As an accessory part rather than a complete vehicle, the set focuses on wheel appearance and fit within an existing trailer setup. Mounted on a scale trailer, the 2 matching rims suit workshop-style rebuilds, custom transport combinations and replacement jobs after regular running. In display scenes or on the road behind a truck tractor, the chrome finish gives the trailer axle area a more authentic heavy-duty look.

RC diggers

1:16 Volvo L260H, wheel loader, 100% RTR

€369.99

The Volvo L260H is one of the best-known wheel loaders on large construction sites, and this 1:16 RC version brings that machine character into a fully functional ready-to-run format. At 530 mm long, 204 mm wide and 212 mm high, the model carries the broad stance and working proportions of the original into a format that gives the bucket action real presence. The 4110 g wheel loader combines scale detail with a drivetrain built for active operation. A battery holder sits under the engine hood, keeping the 7.4 V 1500 mAh Li-Ion drive battery neatly integrated into the body. The detailed driver's cabin includes an opening door, adding another layer of realism to the exterior. Sound and light functions extend the machine feel during operation, while the true-to-original wheel loader tyres match the construction styling with a tread pattern suited to the model's working look. The radio system uses 2.4 GHz technology and 10 channels for precise command input across the loader's driving and function controls. Running time reaches 60 minutes, giving the model enough time for longer loading sequences, repeated manoeuvres and display-worthy driving sessions. On a floor, paving or a compacted play surface, the combination of scale dimensions, functional bucket action and machine-style steering creates a focused RC construction experience.  Warning! Not suitable for children under 14 years.

Mini RC cars

1:50 Nano City Crane Truck, RC truck, 2.4 GHz

Construction crane trucks bring compact utility engineering into motion, and this 1:50 Nano City Crane Truck translates that character into a radio-controlled format with a realistic crane truck appearance, a detailed driver's cab and LED lighting. At 135 mm long, 60 mm wide and 90 mm high, the model fits neatly into indoor driving spaces while still carrying the proportions and working look of a mobile crane vehicle. The interference-free 2.4 GHz remote control system supports precise handling across the truck's compact 146 g format, making short direction changes and careful positioning easy to manage. A 3.7 V Li-Ion drive battery with 500 mAh capacity powers travel times of up to 40 minutes, and the included USB charger keeps the rechargeable setup straightforward. The crane tower can be rotated manually through 360°, while the outriggers can be adjusted manually in both height and length to change the truck's stance for different scenes. That combination suits floor-based routes, desk-edge manoeuvres and small construction layouts where the truck can drive into place, extend its supports and turn the crane into position. With the ready-to-run model, remote control, battery, charger and instructions included, the set focuses on compact RC driving with a functional crane feature and a strong city-service look.

Mini RC cars

1:50 Nano City Garbage Truck, RC car, 2.4 GHz

Utility trucks are a familiar part of the city scene, and this 1:50 Nano City Garbage Truck brings that working-vehicle character into a compact radio-controlled format. At 135 mm long, 60 mm wide and 76 mm high, the model combines a small footprint with a clearly defined body shape and a detailed driver's cab. The ready-to-run set includes the model, a 2.4 GHz remote control, a Li-Ion drive battery rated at 3.7 V and 500 mAh, a USB charger and instructions. With a weight of 146 g, the truck stays light in hand and easy to place on the floor between runs. The 40 minute runtime supports longer driving sessions without frequent charging breaks, while the radio system keeps the control link focused on the vehicle during each manoeuvre. LED lighting adds another functional detail to the body, and the rubber tires support controlled movement with their non-slip contact patch. The compact scale suits indoor routes across hallways, living spaces or a cleared play area, where the truck can weave around furniture legs, follow improvised collection rounds or line up with other city-themed vehicles. Between runs, the true-to-original design and utility-truck proportions also give the model a neat display presence on a shelf or desk.

Mini RC cars

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

€17.99

The Lexus LX570 appears here as a compact 1:60 Nano Racer with radio-controlled handling and a body shape that carries the full-size SUV's presence into a format just 79 mm long. At 33 mm wide, 22 mm high and 25 g in weight, the model stays light and easy to place on tables, smooth floors or short indoor courses. The 2.4 GHz control system supports stable command input across a range of 15 m, while the handset combines driving control with a built-in charging connection. A 1.2 V 80 mAh NiMH drive battery is included, and the ready-to-run format means the main components are already in place for immediate use. The official Lexus licence anchors the styling in the real vehicle, giving the front end and overall proportions a recognisable road-going identity. Included contents are the ready-to-run model, remote control with charging connection, NiMH drive battery, screwdriver and instructions. With up to 10 minutes of driving time, the Nano Racer suits quick laps across a desk, short obstacle layouts or side-by-side sessions with other mini RC vehicles. The ability to operate up to 50 vehicles simultaneously also opens the door to compact group racing without the control system getting in each other's way.

Mini RC cars

1:60 Nano Racer Lexus LX570, RC car, 2.4 GHz

€17.99

The Lexus LX570 appears here as a compact 1:60 Nano Racer with a licensed body shape, combining SUV styling with radio-controlled driving in a format that measures just 79 mm long, 33 mm wide and 22 mm high. At 25 g, the small chassis stays light in hand and easy to place on short indoor routes, from table-edge slaloms to quick floor runs around everyday obstacles. The set comes as a ready-to-run model with a 2.4 GHz remote control unit, a 1.2 V/80 mAh NiMH drive battery, a screwdriver and instructions. The controller includes a charging connection, so the vehicle can be charged directly through the handset rather than through a separate dock. That compact charging setup keeps the driving system together in one place and suits spontaneous sessions when only a small space is available. The 15 m range gives enough distance for controlled manoeuvres across rooms, while the radio system allows up to 50 vehicles to run simultaneously for club-style races or family competitions. Its small scale makes the Nano Racer easy to store between runs and simple to bring out for short RC sessions without a large driving area. On smooth indoor surfaces, the Lexus LX570 shape and mini dimensions create a neat balance of display appeal and active use, whether the focus is solo driving or lining up several cars for close-quarters racing.

RC buggys

1:8 Akuma Buggy, RC car, 4WD RTR pink

€399.99

The 1:8 Akuma Buggy brings 4WD traction, brushless power and a bold pink body shell into a ready-to-run off-road setup built for fast runs on dirt, gravel and uneven ground. With a length of 505 mm, a width of 365 mm, a height of 220 mm and a weight of 3909 g, the chassis carries the broad stance and substantial footprint that suit buggy driving beyond smooth surfaces. A 100A drag-style ESC for 4S operation works with the 2050 Kv 3-pole brushless motor, while the cooling fan and aluminum motor heatsink support the electronics during hard acceleration. Steering input is handled by a 20 kg waterproof servo with metal gears, and the adjustable aluminum steering plate adds another tuning point at the front end. The XT90 high-current connector system and quick-change battery mount with Velcro strap keep battery swaps straightforward between runs. Splash-proof electronics and a 3-position adjustable rear spoiler round out a layout aimed at outdoor use. The included Expert Charger Twin LiPo USB-C charges two 7.4 V LiPo batteries simultaneously at 2A each, matching the supplied 2 x 7.4 V 3800 mAh drive packs. A 10 minute ride time suits short, fast sessions on compact tracks, open gravel areas or backyard jumps, with the color-printed body keeping the Akuma look clear at speed. Age 14+  Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Akuma, body set, pink grey shell

€33.99

The Akuma name suits the sharp, competition-style shape of this 1:8 body set. Pink and grey graphics spread across the moulded shell and separate rear wing, giving the buggy a striking race-ready look while keeping the outer panels visually matched. The shell shows pronounced aerodynamic contours, vent-style moulded detailing and prepared mounting points that guide installation on the vehicle. Alongside the main body and wing, the set includes fastening parts shown for the assembly: body clips, screws, nuts and spacers. That combination makes this set a practical choice when an existing shell needs replacement or when a fresh exterior is planned for an Akuma build. The separate wing adds another defined element to the silhouette and carries the same visual language as the shell itself. In workshop use, the set supports a straightforward body refresh with coordinated parts instead of piecing together individual exterior components. Once mounted, the bold contrast of bright pink, grey, black and white stands out clearly during running sessions and gives the model a focused off-road racing character.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Climb/Dessert Warrior 3.0, wheel set

€40.99

The 1:8 Climb/Dessert Warrior 3.0 wheel set brings a fresh running setup to off-road RC sessions with 4 mounted wheels that combine black rims and knobby rubber tyres in one ready-to-fit package. The tread pattern is shaped for rough terrain, giving the model a more planted feel on dirt sections, gravel paths and broken ground where clean traction matters. Each wheel uses a black multi-spoke rim with a deep inner dish and reinforcing spoke structure visible from the rear. On the outer face, the beadlock-style look with small moulded bolt details gives the set a purposeful desert and off-road character that suits the Climb/Dessert Warrior 3.0 designation. The central hex-style hub opening supports a direct mechanical connection at the axle, so the wheel set is built around practical replacement use rather than display-only styling. As a 4-piece set, the wheels suit a full vehicle refresh after heavy running or a matched swap before the next session on loose surfaces. The mounted design keeps the focus on getting a 1:8 model back onto the track with a consistent look and tread pattern across all 4 corners.

RC buggys

1:8 Rock Wilder, RC car, 100% RTR

€174.99

The 1:8 Rock Wilder RTR brings large-scale off-road driving into a 530 mm chassis with a 355 mm width and 220 mm height, giving the model a broad stance for rough terrain. Its yellow and red bodywork pairs with a type 550 brushed motor and a red anodized aluminum motor heat sink, combining strong drive output with a component setup shaped for sustained running. A quick-change battery mount shortens stops between packs, and the included 7.4 V 3000 mAh Li-Ion drive battery supplies up to 12 minutes of running time. At 2552 g, the model carries enough mass to feel planted as the suspension works across ruts, gravel and uneven ground. The solid impact-resistant front bumper takes the first contact in close running, while the 2.4 GHz radio system supports stable control without the channel conflicts common to older crystal-based sets. Age recommendation: 14 years and over. Loose dirt tracks, compacted paths and rough open ground all suit the Rock Wilder setup, especially where the long wheelbase and off-road tire format can work through changing grip levels. The ready-to-run package includes the remote control, drive battery, USB charger, 4× LR06 transmitter batteries and instructions, so the focus stays on charging the pack and heading out for the next run.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Virus Extreme, wheel set, 2 mounted wheels

€33.99

The Virus Extreme name points straight to rough-surface running, and this 1:8 wheel set supports that role with 2 mounted wheels built as complete assemblies. The black finish, multi-spoke rim design and pronounced off-road tread give the pair a focused look that suits a hard-driven RC setup on dirt and gravel. Because the rims and tyres are already combined, the set works as a straightforward replacement when existing running gear is worn or damaged. The deep block pattern is shaped for loose terrain, where the tread can key into the surface during acceleration and direction changes. The ready-built format also helps when keeping matching spares in the workshop, since both wheels share the same visual style and tread pattern. As a model supply for the Virus Extreme, the set concentrates on one practical job: restoring a consistent wheel and tyre setup with parts made for this series. On a buggy prepared for outdoor sessions, a fresh pair can be fitted before the next run on compacted earth, gravel paths or rough track sections. The set also suits routine maintenance between driving days, when a matching 2-wheel replacement keeps the model prepared for the next outing.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Wheel-Set KOD, wheel set, 17 mm hex

€40.99

Chunky tread blocks and a 1:8 format give this KOD wheel set a focused off-road setup for compatible RC vehicles. Designed for models with a 17 mm hex wheel hub, the 4-wheel set brings a direct way to refresh the running gear with a tread pattern built for loose and uneven ground. The mounted wheels combine black rims with rubber tyres shaped around an extreme stud profile. That profile gives the contact patch a more aggressive bite on dirt and rough tracks, while the rubber compound is specified for a very long service life. As a replacement set, the 4 matching wheels keep the vehicle on a consistent tread pattern at every corner, which matters when the chassis is working across mixed off-road surfaces. The 1:8 scale fit also makes the set relevant for a broad range of larger RC off-road platforms that use the stated hub format. In use, the wheel set suits track days on dusty ground, rough bashing areas and uneven outdoor terrain where a deeper tread pattern can make a clear difference. For model-building enthusiasts, it is a straightforward upgrade or spare set that keeps a compatible vehicle ready for the next run.

RC models in 1:87 scale

1:87 VW Beetle Wintersport, RC car, 2.4 GHz

€109.99

The VW Beetle became one of the most recognisable car shapes of the post-war era, and this 1:87 RC version brings that silhouette into a compact format with working control and winter travel character. The VW Beetle Wintersport pairs micro scale handling with a light blue body, roof rack cargo and ski-themed detailing that stands out on a layout, shelf or small driving course. Its fully proportional control gives measured steering and throttle response instead of simple on-off inputs, which suits careful manoeuvres through model scenery and narrow tabletop routes. The compact chassis works with a very small turning radius, so bends, bridge sections and tighter lane changes feel more natural in limited space. Front and rear LED lights add a clear visual cue during running, especially in dimmer room light or evening diorama scenes. Power comes from a 3.7 V 40 mAh Li-Ion drive battery, and the set includes a 2.4 GHz remote control system plus 4x AAA transmitter batteries for operation. Charging takes place through the transmitter in 45 minutes, making short pauses between runs easy to manage. The ready assembled format puts the focus on driving, collecting and integrating the Beetle into model railway settings, classic car displays or compact indoor RC sessions. Age 14+

RC models in 1:87 scale

1:87 VW T1 Samba, RC car, surfboard RTR

€104.99

The Volkswagen T1 became one of the most recognisable vans of the post-war era, and this 1:87 VW T1 Samba brings that silhouette into a compact RC format with a surfboard detail and licensed Volkswagen styling. At 50 mm long, 21 mm wide and 19 mm high, the miniature format suits controlled runs on a desk, table or small indoor course where tight manoeuvres matter. The body combines detailed shaping with light blue and white paintwork, giving the Samba look a crisp period character in H0 scale. A weight of 15 g keeps the model light in hand and easy to place on narrow driving lines. The permanently installed 3.7 Volt 75 mAh Li-Ion battery supports up to 50 minutes of travel time, and charging takes place via the transmitter. The 100% RTR set also includes 4x AAA transmitter batteries and a storage case, so the model is ready for compact RC sessions straight away. Whether used for careful slalom runs between small obstacles or short laps across a tabletop layout, the miniature size and radio control create a focused driving setup in limited space. Age recommendation: 14 years and over.

RC electric motors & controllers

540 Pro 13T-BB, electric motor, 6 V RC drive

€18.99

The 540 Pro 13T-BB electric motor is a brushed RC drive unit built for model vehicle projects that need a clearly defined performance setup. With 13 turns, a nominal voltage of 6 V and an operating range from 4.8 to 8.4 V, it fits tuning, replacement and workshop builds where the electrical data matters as much as the fit. The attached cable adds a practical connection detail straight from the pack. Its technical profile centres on 32,000 rpm, 35 N mm torque, 99 W output and 5.3 amps current consumption. That combination suits hobbyists comparing drive characteristics across compatible RC electronics rather than choosing by size alone. The 540 can format is a familiar reference point in many model vehicle platforms, and the BB designation marks this version as a ball bearing motor. For workshop planning, the stated voltage window helps match the motor to an existing setup without guesswork. In use, this motor suits replacement jobs on worn brushed drives, fresh tuning builds and spare-parts boxes for regular track or car park sessions. The compact 540 format and included cable keep the focus on fitting the motor into a compatible RC chassis and getting the drivetrain back into action.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 17T-BB, electric motor, 6 V brushed

€18.99

The 540 Pro 17T-BB electric motor brings classic brushed drive character to RC vehicle builds with a 540 size format, 17 turns and a measured output of 69 W. At 24,500 rpm, the motor delivers a lively power curve that suits hobby setups looking for a defined balance of speed and control rather than an undefined all-round unit. Its nominal voltage is 6 V, while the stated operating range of 4.8 to 8.4 V leaves room for different electronics configurations within the same build plan. Current consumption is listed at 3.5 amps, and the 32 N mm torque figure gives a concrete reference for how the motor translates electrical input into rotational force at the shaft. The BB designation points to ball bearing support, a detail valued in model-building circles for smooth running in a compact drive component. Included cable simplifies the connection step and keeps the motor ready for fitting into a compatible RC chassis. With an age marking of 14 years, this motor fits enthusiast-oriented RC projects where component choice shapes the final driving character. It works well in workshop-style upgrade sessions, replacement builds or fresh vehicle assemblies where a 540 brushed motor with 17 turns is the required drive unit.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

540 Pro 21T-BB, electric motor, 6 V 60 W

€18.99

The 540 Pro 21T-BB electric motor brings classic brushed drive technology to RC model builds in a compact 540 size format. With 21 turns, a 6 V nominal voltage and a stated output of 60 W, it gives hobby projects a clearly defined motor option for drivetrain installations where size, power and electrical data all need to line up. Its operating range spans 4.8 to 8.4 V, making the motor suitable for different compatible power configurations within that window. The stated speed of 19,000 rpm and current consumption of 2.7 amps provide concrete figures for planning the drive package around the motor's characteristics. A torque rating of 30 N mm adds another useful reference point when matching the motor to gearing, transmission parts and the intended running style of the model. The included cable supports straightforward integration into the vehicle's electrical layout. In workshop use, this motor suits enthusiasts comparing voltage, rpm, torque and turns before choosing a brushed setup for a compatible RC vehicle. It also works well as a replacement or upgrade path when an existing 540 format installation calls for a motor with clearly specified electrical and performance values.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

6K Reflex Stick Pro 4 WP Receiver, RC receiver

€42.99

The 6K Reflex Stick Pro 4 WP Receiver brings compact radio control hardware to RC vehicles and boats that need dependable 2.4 GHz signal handling in a small format. With 6 channels in a waterproof housing, this receiver supports steering, throttle and additional functions while fitting into installations where space is limited. Its housing measures 46 x 28 x 17 mm and the unit weighs 13 g, so the receiver can be positioned in many chassis layouts without taking up much room. As a replacement receiver, it is made to work with the FS 6K Reflex Stick Pro 4 and the FS 6K Reflex Stick Pro 4 LCD remote controls named in the product data. The 2.4 GHz frequency range supports stable command transmission for models that rely on precise radio response. The 6-channel layout also leaves room for more complex function control than a basic 2-channel setup. In a trail truck, work vehicle, boat or other RC build with several switchable functions, the receiver supports a tidy electronics layout and clear channel allocation. Age 14 Years+

NiMH batteries

7.2V 2500mAh NiMH Race Battery, RC battery

€22.99

Built for RC vehicles and broader model building use, this 7.2 V NiMH race battery combines a 2500 mAh capacity with a Tamiya connector system in a format that fits established hobby setups. The nickel-metal hydride pack is designed as a rechargeable power source for compatible models, making it a practical choice where repeated driving sessions and regular charging cycles are part of the routine. Its specification focuses on the demands of active RC use. A maximum charging current of 2.5 A allows the pack to be charged within the stated limit, while the high current discharge characteristic supports applications that draw stronger power under load. That combination suits a wide range of electric model uses, from vehicle platforms to other model building applications that rely on a 7.2 V battery with this connector format. The pack format with bundled cells, power leads and plug connection follows the familiar layout used across many hobby systems. In use, the battery slots naturally into workshop preparation, replacement planning and regular running sessions with compatible RC models. Age marking: 14 years. Whether kept as a spare pack for longer track time or used as the main power source in a compatible chassis, it brings clear, stated electrical data to the setup.

LiPo batteries

7.4V 4500mAh LiPo Classic-Size, RC battery

€36.99

Built for classic RC layouts, this 2S LiPo battery brings 7.4V output, 4500mAh capacity and a 60C discharge rate into a Classic-Size format that matches the footprint of conventional NiCd and NiMH packs. In a 1:10 chassis with a standard battery slot, the 134 x 45 x 24 mm housing drops into the familiar space while delivering the response and consistency expected from modern LiPo power. The pack uses a Deans plug connector for the main connection and an XHP balancer connection for cell balancing during charging. Its 223 g weight places a substantial energy reserve into a format that remains suitable for common vintage RC cars. The 2-cell configuration supplies 7.4 volts, making it a direct fit for setups designed around this voltage class. The 4500mAh rating extends running potential beyond smaller packs, while the 60C specification supports current demand when acceleration loads rise. Age marking: 14 years and over. This battery suits restoration projects, regular track sessions and classic touring car builds that use a standard battery compartment. It also works well where older chassis dimensions matter, but modern LiPo chemistry is preferred over legacy pack formats.  Warning! Not suitable for children under 14 years.

Li-ion batteries

7.4V 600mAh LiION Battery, replacement battery

€13.99

This replacement battery is specified as a 7.4 V, 600 mAh LiION pack with a Sea Ray JST-3 connector, making it a clearly defined power component for compatible Carson RC Sport vehicle setups. The stated voltage, capacity and plug format give model-building enthusiasts concrete matching points when replacing a worn pack or adding another battery for continued use. As a spare power pack, it focuses on the essentials that matter in an electric RC setup: the 7.4 V rating for the intended system, 600 mAh capacity, and the named Sea Ray JST-3 connection standard. That combination helps narrow compatibility within the relevant vehicle range and keeps the choice grounded in actual technical data rather than approximation. Because the battery is sold as a replacement battery, the role is straightforward: it substitutes for an existing pack with the same specification in suitable models. In practice, this suits workshop shelves, pit boxes and home charging routines where a correctly matched battery is kept ready for the next run. For compatible RC vehicles that use a 7.4 V LiION pack with Sea Ray JST-3 connection, it adds a direct replacement option built around the exact figures given in the product data.

Axles & drive shafts

Akuma Alu-hex Hub 17 mm RC Wheel Adapter

€12.79

The Akuma Alu-hex hub 17 mm is a compact RC spare part set for wheel mounting and running gear service on compatible Akuma model vehicles. With 2 machined aluminium hub pieces, 2 matching nuts, 2 metal pins and 2 black set screws, the set brings together the fastening hardware needed for a complete hub replacement at the wheel end. The 17 mm hex format defines the wheel interface, while the threaded hub design and separate locking hardware point to a mechanical assembly that is secured in several steps rather than a simple push fit. The metal pins and set screws support alignment and retention within the hub setup, helping restore the intended connection between axle area and wheel mount when original parts are worn, lost or damaged. The silver finish keeps the parts easy to identify during bench work, and the compact format suits parts storage in an RC workshop or field box. This kind of hardware fits naturally into rebuilds, maintenance sessions and spare-parts stock for regular RC driving. Whether a model is being refreshed after heavy use or prepared with replacement wheel-end hardware before the next run, this set supplies the core mounting parts in one pack.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Battery Holder Set, model accessory

€27.99

The Akuma Battery Holder Set adds a dedicated battery mounting solution to the model layout with a long tray, matching cover plate and support brackets. Black moulded parts and a screw-fastened structure create a clean, component-based setup that suits hobby work on 14 Years+ models and keeps the battery area clearly organised. Alongside the main tray, the set includes a rectangular frame bracket with upright arms, a clamp-style bracket with mounting tabs and a side loop, a small spacer block, 6 black screws and 2 wide hook-and-loop straps. This combination supports a more tailored installation around the chassis area, with the straps wrapping the battery pack while the rigid parts define its position. The separate brackets also help adapt the holder to the available mounting points rather than relying on a loose battery placement. In workshop sessions, the set supports battery installation, refit work and replacement of worn holder parts on the Akuma. It also suits rebuilds where a clear, screw-mounted battery position is needed for a neat internal layout and repeatable pack changes between driving sessions.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Bodyholder Kit, RC spare part set

€6.59

The Akuma bodyholder kit is a dedicated RC spare part set for front and rear body mounting points, built to return the correct connection between chassis and bodyshell on the matching Akuma model. With a minimum age marking of 14 Years, it sits in the hobby and model-building range rather than general toy use. The set includes a structural holder piece, a mounting plate, 2 matching inserts and 2 screws. The black moulded parts are formed for mechanical fastening, with the plate using multiple mounting holes and the main holder section shaped to seat the inserts and secure the assembly. This layout supports a direct replacement of worn, damaged or missing bodyholder components without introducing unrelated parts. As a model supply in the Carson Modelsport range, the kit is aimed at maintenance work that keeps an RC vehicle ready for continued running. In workshop use, the parts suit routine repairs after body mount wear, impact damage or lost hardware. The front and rear application makes the set useful when restoring the shell position and attachment points so the vehicle can return to its intended fit and appearance.  Warning! Not suitable for children under 14 years.

Wishbones

Akuma Lower Suspension Mount Kit, RC spare part

€15.79

The lower suspension mount sits at a critical point in an RC chassis, where the wishbone holder and mounting geometry need to stay cleanly positioned for consistent assembly. This Akuma Lower suspension mount kit is made for the Carson Akuma and Virus platform and supplies 4 parts for that area, giving model-building enthusiasts the correct replacement set for service work or a rebuild. The set is described as a lower suspension mount kit and in the image shows multiple machined components with drilled holes, recessed fixing points and shaped cutouts that match chassis mounting tasks. These details matter during workshop use because the hole layout and part shape guide the components into their intended position within the suspension section. As a dedicated spare part rather than a general accessory, the kit focuses on one defined chassis function and keeps maintenance work specific to the compatible vehicle family. The visible mix of black and silver finished parts underlines the technical character of the set without adding unnecessary bulk to the assembly. In practice, this kind of replacement set fits naturally into routine RC ownership: worn or damaged suspension hardware can be exchanged during a repair session, and a chassis under rebuild can be brought back with matching lower mount components. The 14 years marking places the set in the hobby segment, where tuning, upkeep and precise parts changes belong to the driving experience as much as time on the track.  Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Motorholder, model accessory mount

€8.49

The Akuma Motorholder is a dedicated mounting part for the Akuma platform, built to secure the motor area with a precisely shaped metal bracket. Its rectangular form combines recessed fixing points with a large central opening and a U-shaped cutout, creating the clearances needed around the drive section while keeping the mount closely integrated with the surrounding assembly. The top face uses countersunk holes so the 5 included hex screws sit flush once fitted. Elongated slots add adjustment range during installation, which supports accurate motor positioning when replacing worn parts or rebuilding the drivetrain section. Three threaded side holes extend the mounting options for adjoining chassis elements, while the darker side walls and machined edges underline the technical character of this spare part. As a focused workshop component rather than a decorative add-on, the mount is shaped around fit, fastening and alignment inside the Akuma layout. This accessory suits bench repairs, routine maintenance and parts replacement on an Akuma model marked 14 Years and up. In a rebuild setup, the bracket forms a defined connection point for the motor section, helping keep the chassis assembly orderly and correctly aligned.  Warning! Not suitable for children under 14 years.

Pinions & gears

Akuma Pinion Gear 14T Model Accessory

€6.89

The Akuma Pinion Gear 14T is a drivetrain accessory for compatible Akuma model vehicles, built around a clear 14-tooth specification that helps identify the correct replacement or maintenance part within an RC setup. In workshop use, that concrete tooth count gives hobbyists a direct reference when checking an existing transmission configuration or preparing a repair. As part of the model supplies range, this gear suits routine servicing, parts organisation and planned spares stocking for RC vehicles in the Akuma line. The product data identifies it as a separate accessory rather than a complete vehicle, which makes it relevant for ongoing upkeep of a running model. The designation Motor Pinion 14T points to its role in the drive system, where a pinion gear forms part of the connection between motor output and the rest of the drivetrain. The listed references 500409082 and 500409083 link the gear to the Akuma context named in the data. On the hobby bench, a dedicated replacement gear helps keep maintenance focused and parts selection straightforward when an existing drivetrain needs attention. The 14 Years age marking is stated in the product data, placing this accessory in the model-building and RC hobby segment.  Warning! Not suitable for children under 14 years.

Additional spares

Akuma Steering Rack, model accessory, aluminum

€8.49

The Akuma steering rack brings a key front-end control component into the workshop as an aluminum replacement part for Carson Akuma models. Its role sits directly in the steering assembly, where the rack forms the connection point for the linkage and supports the intended movement of the front wheels through the chassis layout. The part is described as an Alu steering rack and is intended as a model accessory within the Models & Accessories range. As a dedicated spare part rather than a universal fitting, it matches the Akuma designation named in the data and gives repair and maintenance work a clearly defined replacement for the steering area. The aluminum construction adds a specific material choice to this component, making it a relevant search term for hobbyists who maintain, rebuild, or refresh running gear parts. With the steering plate named in the source data, the part also speaks to focused servicing of the control hardware rather than a general upgrade bundle. In practical use, this kind of replacement belongs on the bench during routine maintenance, after wear in the steering mechanism, or when a build needs the correct Akuma-specific part to return the front end to working order. The 14 Years age marking is stated in the product data.  Warning! Not suitable for children under 14 years.

Ball bearings

CC-02 Chassis Ball Bearing Set, model accessory

€27.99

The CC-02 chassis uses multiple rotating points across its transmission and axle layout, and this ball bearing set is built to replace those wear components with 22 precision-made metal bearings matched to that platform. The mixed sizes shown in the set support the different bearing seats used within the CC-02 chassis, giving model-building enthusiasts a focused upgrade for smoother mechanical operation. Instead of relying on plain bushings, the bearing design supports freer rotation at the points where shafts and driven parts turn inside the chassis. That can help the drivetrain run with less drag during regular use and gives maintenance work a more exact, component-based approach. The set combines 16 bearings of one size with 6 additional bearings in other sizes, reflecting the varied mounting positions found in the chassis layout. For rebuilds, servicing or a fresh parts refresh, that model-specific spread keeps the upgrade aligned with the actual hardware used in the vehicle. In workshop sessions, the set fits naturally into routine maintenance, from replacing worn running parts to preparing a chassis for cleaner, more efficient rotation. It also suits hobby benches where a CC-02 build is being refined with dedicated spare parts chosen for the platform rather than generic hardware.

RC servos

CS-10 Digital Servo, RC servo, waterproof

€31.99

Compact RC control systems rely on a servo that turns radio signals into exact movement, and the CS-10 Digital Servo is built for that task with digital regulation, waterproof construction and a JR plug layout. The black housing with metallic centre section and splined output shaft is shaped for installation in common model applications where steering, throttle or other linkages need controlled travel. Its 0.17-second response supports quick actuation, while the 10 kg torque rating provides the force needed for demanding control duties. Ball bearings support the output shaft for smooth running, and the metal gear train is designed for direct transfer of servo movement to the connected horn and linkage. Included mounting hardware expands setup options with a single-arm horn, an X-shaped horn with multiple linkage holes, rubber grommets and a fastening screw. The 3-wire lead uses the familiar red, black and white layout seen across many RC installations. In an RC car, the servo can manage steering inputs through the splined shaft and horn geometry; in a boat or other hobby mechanism, it can drive throttle or moving control parts with the same compact format. The waterproof design also suits outdoor running where spray and damp conditions are part of the session.  Warning! Not suitable for children under 14 years.

RC servos

CS-17 Digital Servo, RC servo, waterproof

€34.99

The CS-17 brings digital servo control, waterproof construction and 17 kg actuating force into a compact RC component built for precise movement in demanding model setups. With a stated speed of 0.19 sec and a JR connector on the 3-wire lead, it suits steering, throttle and brake functions where clean signal response and dependable installation matter. The housing combines black end caps with a silver centre section, and the top output shaft is metal with a splined interface for secure horn mounting. Side tabs with screw holes support fixed installation in model vehicles or boats, while the included single-arm horn and 4-arm horn offer different linkage layouts. Multiple adjustment holes on the horns make it possible to alter leverage and control travel to match the mechanism in use. Rubber grommets are included for vibration-damped mounting, and the central fixing screw secures the horn to the output shaft. In an on-road chassis, off-road build or boat hull, the servo can be assigned to the moving function that needs measured, repeatable input. The combination of digital operation, waterproof design and included mounting hardware makes the CS-17 a focused choice for hobby workbenches, replacement jobs and fresh RC builds.  Warning! Not suitable for children under 14 years.

RC servos

CS-7 Digital Servo, RC servo, waterproof

€29.99

The CS-7 Digital Servo brings fast digital control to RC installations that need crisp, repeatable movement. With a stated transit time of 0.17 s, this regular-size servo suits steering, throttle or other control functions where quick response and accurate linkage travel matter. The black and silver housing carries a waterproof design, adding flexibility for models that run in wet grass, on damp ground or around spray. Inside the compact case, the servo combines a 7 kg force rating with ball bearing support at the output shaft. That layout helps the spline run smoothly when the horn changes direction under load. The top output shaft accepts the supplied servo horns, including a single-arm horn and a 4-arm horn with multiple linkage holes for different geometry choices. Mounting tabs on the case and the included rubber grommets support secure installation in a chassis, frame or other model structure. The attached 3-wire lead uses a JR plug for connection to compatible radio systems. In cars, boats, aircraft or other hobby mechanisms, the CS-7 Digital Servo fits wherever controlled rotary movement needs to be translated into precise mechanical action. Age marking: 14 years  Warning! Not suitable for children under 14 years.

RC helicopters

Cyber Copter IR 2Ch RTF, helicopter, blue

€21.99

The Cyber Copter IR 2Ch RTF blue brings a futuristic helicopter shape together with ready-to-fly handling for fast access to indoor model flying. Its slim fuselage width of 38 mm, blue finish and switchable LED position lights create a crisp look in the air, especially when flights continue into lower evening light. Infrared control keeps the handling focused on the core 2-channel functions, while the integrated gyroscope supports stable flight behaviour during turns and hovering corrections. Left and right trim adjustment allows the flight path to be tuned more precisely to the room and control input. The helicopter reaches speeds of up to 10 km/h, giving short indoor runs enough pace to feel lively without overwhelming the compact format. At 230 mm long and 95 mm high, with a rotor diameter of 190 mm, the model stays manageable in smaller spaces. The low takeoff weight of 35 g adds to that controlled character during living room or hobby room sessions. A 3.7 V 150 mAh LiPo flight battery powers up to 8 minutes of runtime, and charging runs through USB for straightforward turnaround between flights. The set includes the ready-to-fly model, remote control, USB charger and 3 x LR03 AAA transmitter batteries, so the first takeoff can follow soon after charging. Age 8+

RC helicopters

Cyber Copter Rescue, RC helicopter, 2.4GHz

€25.99

The Cyber Copter Rescue brings compact rotor flight into a ready-to-fly format with a futuristic body, a 190 mm rotor diameter and a 2-channel 2.4 GHz radio system. At 230 mm long, 95 mm high and only 35 g in takeoff weight, the model is sized for controlled indoor flying, where short lift-offs, hovering practice and gentle turns can happen in a smaller space. Its 3.7 V 150 mAh LiPo flight battery delivers up to 8 minutes of runtime and supports speeds of up to 10 km/h. Charging runs via USB, making the battery easy to top up from common USB power sources between sessions. The transmitter operates the flight direction and the LED position lights, while the trim function allows left and right correction to match the room and handling input. The integrated gyroscope works continuously in the background to steady the helicopter during flight. Included in the set are the ready-to-fly model, the 2.4 GHz remote control, a USB charger, 3 LR03 AAA transmitter batteries and a manual. The age marking is 8 years. Short practice flights in a living room, hobby room or other indoor area suit the compact dimensions well, especially when learning how throttle and steering interact in the air.

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flip

€25.99

Compact dimensions and quick-response controls give the Cyber Drone IR RTF a lively indoor flight character, with a 125 mm length, 135 mm width and 150 mm diameter that keep the quadcopter agile in smaller spaces. The 45 mm rotor diameter and 50 g ascent weight support a light, nimble feel in the air, while the red finish and blue LED lighting make the flight path easy to follow during turns and short hovering runs. The control setup focuses on clear handling rather than complexity. Individually adjustable trim allows left and right correction when the quadcopter drifts, and the gyro helps keep movements more settled during take-off, hovering and directional changes. A button-triggered Coming Home function returns the quadcopter to its home point, adding a direct control shortcut during indoor sessions. The 360° flip function brings a distinct stunt element, and the 3 speed settings make it easy to switch between measured practice laps and faster reactions. 8Y+. With an 8 minute flight time, the model suits short flying sessions in living rooms, hobby spaces or other open indoor areas where compact manoeuvres and quick turns come into play. A replacement battery with 3.7 V, 600 mAh and Molex connector is available separately for extended session planning

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a format built for quick lift-off and controlled indoor sessions. Its 125 mm length, 135 mm width and 150 mm diameter keep the frame small and nimble, while the 45 mm rotor diameter and 50 g ascent weight support a light, responsive feel as the orange drone moves through turns, short climbs and hovering passes. The Coming Home function returns the quadcopter to its home point at the touch of a button, adding a clear control step during flight. Flight time reaches 8 minutes per charge, powered by the included 3.7 V 600 mAh LiPo flight battery. The ready-to-fly package also includes the IR remote control and a USB charger, so the core flying equipment is already part of the set. EN 71, EN 62115 and EN 4709-001 compliance is stated in the product data, and the age marking is 8 years. Short practice flights, button-triggered flips and pace changes across the 3 speed levels give each session a distinct rhythm. Blue flashing LEDs stay visible as the drone circles through a room, rises for a quick stunt, then settles back into controlled directional inputs.

RC quadcopters

Cyber Drone Space Taxi, quadcopter, 2.4 GHz RTF

€34.99

The Cyber Drone Space Taxi 2.4G 100% RTF brings compact quadcopter flying into a 125 mm long and 135 mm wide format with a 150 mm diameter and 45 mm rotor diameter. Its ready-to-fly setup, 2.4 GHz remote control system and 3.7 V 600 mAh LiPo flight battery put the focus on lift-off, hovering and short directional inputs with minimal preparation. With a flight time of 8 min and an ascent weight of 50 g, the model stays light in the air and easy to handle in compact spaces. A one-button Coming Home function sends the quadcopter back toward its home point, adding a clear control aid during short flight sessions. The included flight battery matches the stated 3.7 V and 600 mAh specification, and the data also names a replacement battery with a Molex connector for continued use across multiple sessions. The 2.4 GHz control system supports responsive command input without cable connections, fitting the quick, agile character of a small rotorcraft. Short indoor flights, first hovering practice and simple stunt runs all suit this format well. With an age marking of 8 years, the Cyber Drone Space Taxi fits entry-level remote-control flying where compact dimensions, visible lighting and button-based functions keep each session active and easy to follow.

RC tires & rims

Desert W.4x Tyre Wheel Set, RC wheels

€33.99

The Desert W.4x Tyre Wheel Set brings a rugged off-road look to RC vehicle builds with black tyres, black multi-spoke rims and a tread pattern cut for rough terrain. In the workshop or at the track, the set gives scale-focused off-road models a more purposeful wheel setup with a strong visual link to crawler and desert-style machines. The tyre surface shows deep, widely spaced tread blocks that are shaped to work across loose ground, gravel and uneven sections. Beadlock-style rim detailing adds a technical appearance around the outer edge, while the central mounting hole marks the set out as a running component rather than a display part. The sidewall styling visible on the tyres reinforces the off-road character and gives the wheels a more realistic scale presence once fitted. With tyre and rim already combined, the set concentrates on one of the most visible areas of an RC build and changes both stance and terrain focus in a single swap. On shelf-built crawlers, trucks or other off-road RC models, the wheel set suits projects that aim for a tougher terrain profile and a more planted visual finish. It also works well as a replacement set when an existing build needs fresh wheels with a deeper tread layout for rougher running conditions.

RC brushless motors

Dragster Turbo 2.0, brushless set, 1:10

€59.99

The Dragster Turbo 2.0 brushless set brings a matched drive upgrade to 1:10 RC models with a 2600 kV sensorless brushless motor and a 60 A waterproof ESC. With a no-load speed of 20,720 RPM and short-term output of about 310 W, the set is built for hobby setups that call for stronger acceleration and a more direct throttle feel. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, giving clear reference points for installation planning in suitable chassis. Its continuous current is 42 A. The ESC adds 80 g and is designed for 2S LiPo or 6-cell NiMH batteries at 7.4 V. A forward, brake and reverse function is integrated, and the controller handles 60 A continuous current with 360 A peak current. The T-Plug connector defines the battery-side connection, while the included switch module and receiver lead support standard RC wiring layouts. This set suits rebuilds, performance-focused replacements and fresh 1:10 projects where motor and controller need to work as a coordinated pair. A brushless motor, speed controller and instructions are included. A battery pack, charger and radio gear are required separately.  Warning! Not suitable for children under 14 years.

Pinions & gears

Drakuro Center Differential, RC spare part

€41.99

The center differential with spur gear is a dedicated drivetrain spare part for the Drakuro platform from Carson Modelsport. Listed for the 1:8 4WD chassis and described as a center differential with main gear, it targets the transmission area where power is managed within the named vehicle layout. As a models supplies component, this part is intended for repair, servicing, or replacement work on the specified chassis rather than as a universal fitment. The data links it directly to the Drakuro BL 3S series, including the Anthracite/Red version 500409096 and the Blue version 500409097, which helps place the part within the correct vehicle family. The combination of center differential and spur gear identifies a core drivetrain assembly used in the middle section of the chassis. In workshop use, this kind of replacement part supports planned maintenance after regular running sessions or the renewal of worn transmission components on the matching Drakuro model. For hobby benches focused on keeping a 1:8 4WD vehicle ready for the next outing, the named chassis reference gives a clear platform match.

Pinions & gears

Drakuro Differentials Front and Rear Set

€49.99

The Drakuro differential set covers both key drivetrain positions with 2 units for the front and rear of the chassis. Named in the data as Drakuro Differentials front and rear, this spare part set is aimed at 1:8 4WD running gear where the transmission layout depends on a differential at each axle. Within a 4WD chassis, the differential is the component that distributes drive across the axle while the model is under power. Replacing worn transmission parts can restore the mechanical basis the chassis was designed around, especially when both axle positions are serviced together rather than one side at a time. The set format keeps the front and rear assignment clear and suits maintenance work focused on the drivetrain rather than body or electronics parts. The product data identifies the pair specifically for the Drakuro platform, making the application more precise than a generic RC spare. This kind of replacement set fits naturally into workshop stock for repair, scheduled servicing, or rebuilding a used chassis. For hobbyists working on a Drakuro 1:8 4WD model, the 2-piece layout provides the core differential parts needed for the front and rear transmission positions in one purchase.

Pinions & gears

Drakuro Motor Pinion Gear, accessory, 12T

€8.49

The Drakuro Motor pinion gear is a steel drivetrain spare part built around a clear specification: 12 teeth, a 5 mm bore and a grub screw for fastening on the motor shaft. For compatible 1:8 4WD chassis layouts, that combination gives model-building enthusiasts a defined replacement choice when the original pinion needs to be exchanged. The steel construction focuses this part on the drive system, where tooth count and bore size need to match the installed setup. The grub screw secures the pinion on the shaft, while the 12T format provides the stated gearing reference for maintenance or repair. The product data also links this part to Drakuro BL 3S vehicle versions in anthracite/red and blue, which helps place it within the Drakuro range without overstating compatibility beyond the stated information. In workshop use, this kind of spare part belongs in routine drivetrain servicing, rebuilds after wear, or a direct replacement during ongoing running sessions. For hobby benches that stay organised by exact dimensions and tooth counts, the 5 mm bore and 12T layout make this gear easy to identify within a parts stock.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH 2,2A, charger, 5-8 cells

€23.49

The Easy Charger NiMH 2,2A brings a focused charging setup to RC bench work with a 2.2 A maximum charging current, 25 W output power, and support for NiMH battery packs with 5-8 cells. Delta peak cutoff is built in, so the charger monitors the pack during charging and stops the process at the defined point for this battery type. Its AC 100-240 V input makes the unit suitable for common mains voltages, which helps when the charger moves between home workspaces, club tables, and event locations. The Tamiya charging connector keeps compatibility clear for packs that use this established plug format. Included contents are the charger, power cable, and manual. 14 years marks the recommended age. On a hobby bench, the compact specification keeps the task simple: connect a compatible NiMH pack, power the charger from the mains, and let the delta peak function handle the charge endpoint. It also fits neatly into an RC equipment setup where a dedicated charger for 5-8 cell NiMH packs is needed alongside running gear and workshop essentials.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH 3A USB-C, charger

€16.99

The Easy Charger NiMH 3A USB-C brings a compact charging setup to RC workbenches and track bags with USB-C input, NiMH support and a maximum charging current of 3 A. Designed for 4-8 cell NiMH battery packs, it combines a modern power connection with the familiar charging needs of many hobby-grade RC systems. Its input range of 9-20 V DC allows operation from compatible USB-C power supplies, adding flexibility when charging away from a fixed hobby station. Delta-peak cut-off manages the end of the charging cycle for NiMH chemistry, so the charger is built around the charging behaviour these packs require rather than a one-size-fits-all approach. The Tamiya connector gives a direct link to compatible battery packs, which keeps the setup focused on common RC battery connections. Charger, USB-C charging cable and instructions are included. In practice, this charger suits workshop preparation before a run, battery top-ups between sessions and compact transport in an RC kit. The 14 Years age marking is stated in the product data, and the charger fits naturally into hobby routines built around NiMH-powered models and accessories.

RC helicopters

Easy Tyrann 280, RC helicopter, 2.4 GHz RTF

€39.99

The Easy Tyrann 280 brings coaxial helicopter flying into a compact 280 x 200 x 125 mm format with a ready-to-fly setup, a 2.4 GHz control system and a top speed of 25 km/h. Its blue and black body, landing skids and illuminated nose give the model a clear presence as it lifts off for first hovering attempts in the living room or on a calm patio. Integrated gyro electronics support steadier flight characteristics, while the aluminium tail boom adds structure to the rear section during directional control. Left and right trim can be adjusted from the transmitter to correct the flight path in the air rather than interrupting a session. The switchable LED position indicators help keep orientation visible when the helicopter turns or moves further from the starting point. A 3.7 V 250 mAh LiPo flight battery powers runs of up to 8 minutes, and the included USB charger handles recharging between flights. The set also includes 3 x AAA transmitter batteries, so the model arrives with the key operating components in the box. This RC helicopter fits short practice sessions, from learning stable hovering indoors to controlled passes in light outdoor conditions. With 12 Years as the stated age marking and 1-player operation, the Easy Tyrann 280 suits focused solo flying where control inputs, trim changes and throttle feel can be learned step by step.

Model tools

EdgeArt Brush Modeling Brush with PTFE Tip

€8.69

EdgeArt Brush brings 2 functions together in one modeling tool: a brush for paint work and a PTFE tip for decal handling. That combination supports controlled finishing on scale models, where small surfaces, narrow edges and clean placement call for more than a standard brush alone. The PTFE tip adds a dedicated contact point for moving, aligning or smoothing decals during application, while the brush side remains ready for detail painting and touch-ups. This makes the tool useful across separate finishing steps without changing between unrelated bench tools. The compact format suits careful work on markings, trim lines and other small visual details that shape the final look of a build. With batteries not included and no power requirement stated, the focus stays entirely on manual control and precise handling at the workbench. In a model-building session, the EdgeArt Brush can move from painted details to decal placement as the finish develops across the body or surface. For hobby benches where fine corrections, small graphics and neat edges matter, the combined brush and PTFE tip keep the process direct and exact.

RC electric motors & controllers

Electric Motor 540 23T-BB, RC motor, 6 V

€14.99

The 540 23T-BB electric motor brings classic brushed drive technology to compatible RC vehicle builds with a clearly defined 540 format, 23 turns and 50 W output. A nominal voltage of 6 V and a working range from 4.8 to 8.4 V give model-building enthusiasts concrete figures for planning a suitable drivetrain setup around the motor. Its 19,900 rpm speed, 2.2 amp current consumption and 29 N mm torque outline how this unit is positioned within an RC system: fast enough for responsive running, yet specific enough for considered replacement or tuning decisions. The included cable adds a practical installation detail straight from the box contents, while the single output shaft and compact cylindrical housing suit the familiar layout used in many powered model vehicle applications. As a standalone motor component, it fits naturally into workshop routines such as refreshing a worn drive unit or assembling a new compatible chassis. In use, this motor suits hobby bench setups where voltage, turns and output need to be matched carefully to the rest of the electronics. The 14 Years marking places it within the hobby-focused end of the range, making it a fitting choice for model vehicle enthusiasts working on maintenance, upgrades or fresh RC builds.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

Electric Motor 540 80T-BB, RC motor, 6 V

€14.99

The 540 80T-BB electric motor brings classic brushed RC drive hardware into compatible vehicle builds with a 6 V nominal voltage, 80 turns and a measured output of 15 W. Its cylindrical 540 format, output shaft and attached cable create a straightforward basis for drivetrain installation where controlled delivery and clear mechanical feedback are part of the appeal. A voltage range of 4.8 to 8.4 V opens the motor to different matching electrical setups, while the stated current consumption of 0.7 amps adds a concrete reference point for planning the drive system. The rated speed of 5,900 rpm works alongside 130 Nmm torque, giving the motor a balance that suits applications where usable pull and steady response matter alongside rotation. The included cable is already fitted to the motor, so the connection side is present from the start. Age marking: 14 Years. In an RC workshop, this motor fits naturally into replacement projects, fresh chassis builds or drivetrain changes that call for a 540-size brushed unit. It also suits hobby setups where the focus lies on matching voltage, torque and rpm figures carefully to the rest of the running gear for a well-judged result.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger Max 15, charger, 15A 300W

€79.99

Expert Charger Max 15 brings charging, signal measurement and bench testing together in one compact unit for RC and model-building setups. With up to 15 A charging current and 300 W on DC or 100 W on AC, it handles everyday pack management with the output needed for a broad mix of battery types. The supported battery range covers LiPo, LiHV, LiFe, LiIon and LTO packs from 1-6 cells, NiMH from 1-16 cells and Pb from 1-10 cells. An integrated 1 A balancer equalises cell voltage during charging, adding a dedicated function for lithium pack care. Beyond charging, the unit reads PWM, PPM and SBUS signals and measures both voltage and internal resistance, giving useful data for checking electronics on the bench. ESC test mode adds another practical workshop function, and the adjustable power supply broadens the device's role in model maintenance and setup work. A 2.0" IPS display with 320 x 240 pixels keeps menus and readings clear during operation. AC input from 100-240 V and DC input from 7-28 V support use in different workshop and field power situations. With dimensions of 108 x 106 x 60 mm and a weight of 350 g, the charger fits easily into RC pit gear, workbenches and transport cases. Included are 1 charger, 1 AC cable and 1 USB A to USB A upgrade cable. Age 14+  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 2A Charger Set, battery set

€44.99

The Expert Charger NiMH 2A Charger Set combines a compact charging unit with a 7.2 V 2500 mAh NiMH racing pack for RC running sessions with less downtime between uses. Its 20 W output and charging current of up to 2 A give the charger a clear, focused role on the hobby bench, while the transparent housing, ventilation slots and start stop control shown on the unit underline its workshop-ready layout. Designed for NiMH battery packs from 4 to 8 cells, the charger covers more than a single pack format and suits a range of compatible RC applications. The mains input of 110-240 V supports use with common power supplies, which makes the set practical for club rooms, home workspaces and travel between running locations. A clear status LED keeps the charging state visible during operation, and the automatic shut-off function ends the process once charging is complete. The included mains cable connects the charger directly to the power source, while the matched battery pack adds 2500 mAh capacity in a 7.2 V format. On the workbench, the set supports routine preparation before a driving session and straightforward recharging afterwards. For RC enthusiasts aged 14 years and up, it brings together charger, battery and connection standard in a compact format that fits regular hobby use.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 2A, battery charger

€22.99

The Expert Charger NiMH 2A is built for RC and model-building enthusiasts who need a dedicated charger for compatible NiMH battery packs. With support for 4-8 cells, a maximum charging current of 2 A and up to 20 W output power, it covers a practical range for regular workshop charging while keeping the setup focused and easy to handle. The charger runs on 110-240 V input voltage and connects through a TAMIYA plug, making it suitable for many established hobby battery formats. A clearly visible status LED keeps the charging state readable during use, while the Start/Stop control shown on the unit adds direct handling at the charger itself. Automatic cut off manages the charging process with a defined stop function for compatible packs. Cooling vents on the housing support airflow around the unit during operation, and the mains cable is included for immediate connection to a power outlet. On the workbench, in the hobby room or as part of a regular RC maintenance setup, this charger fits neatly into the routine between driving sessions. The set includes the EXPERT CHARGER NiMH 2A, a mains cable and a German/English manual.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger NiMH 4A Charger Set, battery

€69.99

The Expert Charger NiMH 4A Charger Set combines a compact charger with a 7.2V 4000mAh NiMH racing pack for RC vehicle use and workshop-ready battery care. Automatic shut-off ends the charging process when the cycle is complete, while the status LED gives a clear visual readout during each session. The charger accepts input voltage from 110V to 240V and supports LiPo, LiHV, LiFe and NiMH battery types. Compatible cell counts cover LiPo 2-4S and NiMH 5-8 cells, opening the set to a wide range of common RC power formats. Charging current adjusts from 0.5A to 4A in 0.5A steps, so the output can be set to suit the connected pack rather than running at one fixed rate. Maximum output power reaches 50W. Included in the set are the charger, the NiMH drive battery, a mains cable and 1 XT60 to NiMH adapter cable. On the workbench, the set supports routine charging before driving sessions, battery swaps between runs and straightforward preparation of compatible packs. The included 7.2V 4000mAh racing pack also gives the set an immediate starting point for RC models that run on NiMH power. Radio gear, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Remote-controlled systems

FS 14K Reflex Stick Pro 4, transmitter, 2.4GHz

€119.99

The FS 14K Reflex Stick Pro 4 brings a 14-channel layout, 2.4GHz transmission and a modern ergonomic RC housing into one control system shaped for complex model functions. Its carbon-look surface and illuminated logo give the transmitter a technical, workshop-ready appearance when powered on. The channel structure is designed for detailed function control. Four channels work continuously and fully proportionally for direct response through the control sticks, while channels 7, 8, 9, 10, 13 and 14 are assigned to 3-position toggle switches. Channels 5, 6, 11 and 12 operate through 3-position push buttons with centre position, creating a clear split between proportional inputs and switched functions. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply allows up to 11 V without BEC. A 15-channel receiver is listed in the included contents. For setup work, channels 1 to 4 feature servo reverse and trim, and channels 1 and 4 add dual rate for servo travel adjustment. This makes the system suitable for models that need tailored steering, throttle or auxiliary function behaviour. 100% compatibility is stated for TAMIYA MFC 01, MFC 02, MFC 03 and DMD units, which suits truck and function-model layouts with multiple switching tasks. 14 Years is stated as the recommended age.

Remote-controlled systems

FS 14K Reflex Stick Pro, RC transmitter, 2.4GHz

€149.99

The FS 14K Reflex Stick Pro 4 LCD 2.4GHz brings broad channel control and fine setup options into one radio system built for demanding RC models. With 14 channels, an LCD layout and a 15-channel receiver in the set, it supports complex functions that go beyond basic steering and throttle, while the carbon-look finish and illuminated logo give the transmitter a distinctive technical appearance. Channels 7, 8, 9, 10, 13 and 14 use 3-position toggle switches, while channels 5, 6, 11 and 12 use 3-position push buttons with centre position. The transmitter runs on 4.8 to 6 V from 4 AA cells, and the receiver power supply can reach up to 11 V without BEC. A Graupner J/R connector system is used for integration, and the radio is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as DMD units. The set includes the 14-channel LCD remote control, a 15-channel receiver and a manual. For truck, construction and function models with multiple switching tasks, the channel layout supports lighting, sound and auxiliary functions from one handset. The 14 Years marking fits advanced RC use, where stored model setups and detailed channel assignment matter during regular driving and system changes.

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

€99.99

The FS 6K Reflex Stick Pro 4 2.4GHz brings 6-channel radio control into a layout built for detailed model setups and precise handling. Four continuously adjustable, fully proportional channels work alongside a 3-position push button on channel 5 and a 3-position toggle switch on channel 6, giving a clear control structure for driving functions and switched features. The integrated failsafe system adds an important control function for model operation. Trim for channels 1-4 supports exact correction directly at the transmitter, while dual rate for channels 1-2 adjusts servo travel for a more tailored response. The control sticks use precise, smooth mechanics, and the housing combines an ergonomic shape with a carbon-look surface and an illuminated logo when powered on. The transmitter operates at 4.8-6 V with 4 AA cells, the receiver power supply reaches up to 11 V without BEC, and the connector system uses Graupner J/R. Compatibility with TAMIYA MFC 01, MFC 02, MFC 03 and DMD units expands the range of suitable model applications. On the bench, the channel layout supports careful setup of steering, throttle and auxiliary functions before a model heads out. During driving sessions, the separate switching options and proportional control help keep inputs clean and deliberate across different model configurations.

Remote-controlled systems

FS 6K Reflex Stick Pro 4, transmitter, 2.4GHz

€109.99

The FS 6K Reflex Stick Pro brings 2.4GHz radio control, a 6-channel layout and an LCD interface into one focused setup for model driving with a clear, technical feel in hand. Smooth control sticks, an ergonomic housing and a carbon-look surface shape a transmitter that suits longer sessions at the workbench and on the track alike. Channels 1 to 4 are continuously adjustable and fully proportional, while channel 6 is assigned to a 3-position toggle switch and channel 5 to a 3-position push button with centre position. The transmitter stores 15 model memories, making it easier to keep separate configurations ready for different vehicles. For channels 1 to 4, servo reverse changes direction of movement, trim corrects neutral position, dual rate adjusts servo travel, EPA limits servo travel and EXP changes response characteristics around centre input. The receiver power supply can reach up to 11 V without BEC, and the system is 100% compatible with TAMIYA MFC 01, 02 and 03 as well as the DMD unit. A 6-channel receiver and manual are included. 4 AA cells are required separately for the 4.8 to 6 V transmitter operating voltage. With a minimum age marking of 14 years, this radio set fits hobby-focused RC setups where multiple channel functions, stored profiles and detailed response adjustment matter during driving and setup.

Model tools

GlueBrush 13 mm Tip Refill Pack, model accessory

€4.89

Precise adhesive work often depends on the right contact width, and this GlueBrush refill pack adds 18 replacement tips in a 13 mm format for repeated use at the workbench. The wider tip size suits glue application across broader bonding areas, where an even spread helps keep joins neat during model-building and repair tasks. As a dedicated refill for the GlueBrush system, the pack supports ongoing workshop use without changing the established handling of the applicator itself. The 13 mm format gives a clear, practical option when adhesive needs to cover more surface than a narrow tip allows. That makes the set useful for assembly stages, material joins and touch-up work where consistent glue placement matters. With 18 replacement tips in one pack, fresh working heads are available for multiple sessions instead of relying on a worn applicator end. On a model-building bench, the refill pack fits naturally into regular adhesive routines, whether one stage calls for a clean new tip or separate materials are being handled in sequence. The format also works well as workshop stock for hobby projects that return to glue work again and again.

Model tools

GlueBrush 3 mm Tip, refill pack, model supply

€4.89

GlueBrush 3 mm Tip (18) Refill Pack brings a straightforward supply of fresh applicator tips to the workbench for precise adhesive handling in model-building tasks. With 18 replacement tips in a 3 mm format, the set supports repeated glue application on smaller contact points, narrow edges and detail-led assembly steps. The 3 mm tip size helps keep the glue line defined when working on compact joins that need more control than a broader applicator can offer. As a refill pack, this set is built around maintaining the GlueBrush setup already in use, making it a practical addition for ongoing builds, touch-up work and repair jobs. The pack format suits hobby benches where consumables need to stay ready between projects, and the quantity of 18 tips provides a useful reserve for regular adhesive work. The age marking is 14 years and up. On a model-building table, these replacement tips fit naturally into assembly sessions that move between test fitting, bonding and detail placement. They also support careful adhesive application during maintenance work, when a fresh tip can help keep handling neat around smaller parts and tight spaces.

Model tools

GlueBrush-Set with 3mm Nano Tips, model tool

€13.39

Precise adhesive placement can make the difference between a clean assembly and visible excess on a finished model. The GlueBrush-Set with 3 mm Nano Tips is built for controlled glue work on small contact areas, bringing a finer application point to detailed model-building tasks. The set format combines a GlueBrush applicator concept with 3 mm Nano Tips, giving model builders a concrete tool for directing adhesive onto narrow joins and small parts. That focused application helps when working around edges, seams and compact assemblies where broad glue spread can interfere with the finish. In repair work, touch-up steps or fresh builds, the smaller tip size supports a tidier workflow on parts that need accuracy rather than volume. The 3 mm tip dimension is the key working detail here, because it suits jobs where placement matters more than coverage. On the workbench, this set fits careful assembly sessions with scale models and hobby projects that call for neat glue control on fine components. The age marking 14 Years is stated in the product data.

Model tools

GlueBrush-Set, model supplies, 13 mm nano tips

€13.39

The GlueBrush-Set with 13 mm nano tips is built for adhesive work that calls for a finer touch on model-building projects. Its compact tip format helps place glue on small contact areas, narrow seams and delicate parts where broad applicators can leave excess material behind. Within model supplies, this set supports controlled handling during assembly, touch-up and repair work on miniature components. The 13 mm tip length gives access to confined spots around edges and joins, making it easier to guide adhesive exactly where the bond is needed. That focused application can help keep surrounding detail cleaner on small-scale builds and reduce smearing across adjacent surfaces. Because the set is centred on precision rather than volume, it fits tasks that involve careful placement on trim, fittings and other fine sections. On the hobby bench, the GlueBrush-Set works well alongside regular building tools when a project reaches the stage for neat adhesive application. It also suits maintenance sessions where a small part, seam or detail piece needs accurate glue placement without flooding the area.

Model tools

IronPoint Brush 1.0 mm Ball, model paintbrush

€8.49

The IronPoint Brush 1.0 mm Ball brings a fine-format painting tool to model work where small areas and controlled handling matter. Its 1.0 mm ball tip gives hobby benches a focused option for placing paint on compact sections, edge lines and detail zones that benefit from a smaller contact point. Within model finishing setups, a brush like this supports careful colour work without shifting into broad coverage. The ball tip format suits measured application on parts that need accuracy rather than speed, making it useful for touch-ups, narrow accents and small painted elements. The slim working size also fits projects where different brush widths are used across separate stages, with the 1.0 mm format covering the finer end of that workflow. As a model supplies tool, it belongs alongside paints and other finishing essentials used to refine surface details. On the workbench, the brush suits detail passes on scale components, figures or decorative sections where clean placement counts. It also fits follow-up painting after assembly, when smaller areas need careful finishing or colour correction.

Model tools

IronPoint Brush 1.4 mm Ball, model brush

€8.89

The IronPoint Brush 1.4 mm Ball brings a fine, controlled tool into model finishing, with a ball-shaped 1.4 mm tip that suits careful paint placement on small sections and detailed surfaces. In a hobby workspace, it fits naturally beside paints and parts where neat edges and measured brush movement matter. Its single-brush format keeps the choice straightforward when a specific tip size is needed for touch-ups, accents or compact painted areas. The ball tip shape supports close work around contours, raised details and narrow sections that benefit from a smaller contact point. For model-building enthusiasts, that makes it useful during colour application on figures, accessories or body details where broad coverage would be less precise. The product data states an assembly time unit, voltage unit and operating time unit at database level, but no usable values are provided for this brush, so the copy stays focused on the confirmed brush specification. On the bench, the IronPoint Brush can move from small correction work to deliberate detailing passes without changing to a larger format. The stated age marking is 14 Years, and the 1-brush pack suits replacing a worn detailing tool or expanding an established painting kit with a dedicated fine-tip option.

Model tools

IronPoint Brush 2.0 mm Ball Hobby Tool

€8.99

IronPoint Brush 2.0 mm Ball is a precisely designated hobby tool from the Carson Modelsport range, defined in the data by its 2.0 mm ball format and single-piece pack count. That clear specification gives model-building enthusiasts a concrete reference when selecting tools for bench work that calls for a named tip size and shape. The available data is intentionally compact, so the description stays close to the verified facts. Both the ShortDescription and ShortDescriptionMM fields identify the same IronPoint Brush 2.0 mm Ball designation, which supports consistent catalogue recognition and straightforward matching when replacing an existing brush or adding a specific format to a workshop setup. The age marking is 14 Years, stated exactly as provided. The pack count is 1, making this a single brush rather than a multi-piece set. Within a model-building workspace, a clearly labelled 2.0 mm ball brush suits organised tool selection, whether the aim is maintaining a dedicated bench assortment or keeping a known format ready for repeat tasks. The concise specification makes this version easy to identify in storage, workshop drawers or project planning where exact naming matters.

Model tools

IronPoint Needle 0.5 mm, model tool tip

€10.99

IronPoint Needle 0.5 mm Pointed is a fine model-making tool component with a clearly defined pointed tip for controlled work on small-scale tasks. The 0.5 mm size gives this needle a narrow working profile that suits precise contact in tight areas, whether the focus is detailing, touch-up work or other careful workshop steps. As a single needle version, it fits situations where a specific tip size is needed rather than a mixed set. The pointed shape supports exact placement on edges, corners and small sections that benefit from a slim tool profile. In a hobby workspace, a dedicated 0.5 mm needle can help keep processes consistent when the same fine format is required across repeated tasks. The stated minimum age is 14 years. On the bench, this kind of narrowly sized needle suits focused sessions where small parts and compact surfaces call for measured handling. It also works well as a spare kept alongside model supplies, ready when a matching pointed 0.5 mm needle is needed for continued project work.

Li-ion batteries

Li-Ion replacement battery, RC accessory, JST

€9.99

This Li-Ion replacement battery brings the correct 3.7 V power supply and 500 mAh capacity to selected 1:24 Carson RC Sport vehicles, keeping compact RC car setups ready for the next drive. The JST plug connection gives the battery a defined connector format for models built around this matching lead. With 1.9 Wh, the battery is designed as a rechargeable spare pack for small-scale electric RC cars that use this voltage and connector layout. The visible 2-wire lead connects the battery pack to the vehicle electronics through the specified JST plug, making compatibility the key point when choosing this spare. The pack is listed for the 1:24 Lamborg.Murcielago SV, Lamborgh.Veneno, M.-Benz SLS AMG, Ford GT, Aston Martin Vantage and Lamborghini Sian. The pack contains 1 spare battery. As a workshop shelf spare or a direct replacement for a used pack, this battery fits neatly into an RC routine built around short charging breaks and repeat driving sessions. For collectors and hobby users running several compatible 1:24 road cars, the shared battery format keeps the setup focused on the models named in the compatibility list.  Warning! Not suitable for children under 14 years.

RC truck accessories

Low Loader Control TLS-SH RX IR, RC control unit

€159.99

Built for detailed 1:14 truck and trailer projects, the Low Loader Control TLS-SH RX IR adds electronic control to a compatible gooseneck low-bed trailer with steerable low-loader axles. The set combines a motor control unit for the gooseneck, a servo steering control unit and an IR receiver to connect the trailer functions into one coordinated system. The infrared link transfers signals from the gooseneck to the drop-bed section, so the steering and related trailer functions can be operated across the articulated layout. Included in the set are a steering sensor, an IR receiver for the steering unit, an IR transmitter for the gooseneck, a switch cable for motor control and a 4-pin connection cable. The electronics run on 7.4 to 12V DC, the BEC provides 5V DC at 5A for the steering servo, and the motor controller is rated for 7.4 to 12V DC at 5A. Compatible light functions can also be retrofitted through the available outputs for taillights, a rotating beacon and warning signs. This control set is designed for the CARSON gooseneck low-bed trailer 500907700 and for controlling steerable low-loader axles 500907699. Age 14 Years. A transmitter is required separately: the MFC-TLS transmitter for use with a TAMIYA MFC, or the UNI-TLS transmitter for third-party systems.

Chargers & charging cables

Multi-Charger Cable 8in1, charging lead, 4mm

€10.99

The Multi-Charger Cable 8in1 brings 8 common RC charging connections together in one harness, linking a charger with 4 mm banana plugs to a wide spread of battery connector standards. Crocodile clips, Futaba, BEC, T-Plug, XT90, XT60, Tamiya and Mini Tamiya are all present on the lead, giving the bench a compact way to handle different packs without changing between separate adapters. The cable format suits model-building enthusiasts who keep several battery types in rotation across different machines and electronics. The paired red and black 4 mm banana plugs form the charger side, while the branched output end presents the charging options in one place. This makes the lead useful when older packs, current high-current connectors and smaller legacy formats all need support within the same workshop setup. The harness works as an accessory in the charging chain rather than as a battery or charger itself, so its role stays clear when organising RC equipment. On the workbench, the Multi-Charger Cable 8in1 helps streamline routine charging before driving sessions, maintenance work or battery checks. It also fits neatly into a field box or workshop drawer as a single connection solution for mixed RC collections.  Warning! Not suitable for children under 14 years.

NiMH batteries

My First Magic Machine Battery, 4.8V RC pack

€15.49

The My First Magic Machine battery brings the stated 4.8 V NiMH setup and 600 mAh capacity into one dedicated power pack for compatible Carson RC models. Built with a JST plug, it connects through the specified connector format for the My First Magic Machine reference 500404201/02, making it a focused replacement or spare for the named vehicle platform. As a rechargeable NiMH battery pack, it is configured for repeated use in RC driving rather than as a loose-cell solution. The 4.8 V rating defines the voltage level for the intended model, while the 600 mAh capacity identifies the pack specification clearly when selecting a matching battery for maintenance, continued running, or a second charged pack between sessions. The attached lead and plug arrangement keep the connection format integrated into the pack itself. This makes the battery straightforward to identify within an RC parts box where voltage, capacity, chemistry, and connector type all matter. Whether kept as the main running pack or stored as a backup for the next outing, this battery serves as a model-specific power source for the My First Magic Machine range. For hobby benches, charging routines, and replacement planning, the clearly stated NiMH, 4.8 V, 600 mAh, and JST details give the essential matching points at a glance.

Remote-controlled systems

RA 3Ch Reflex Stick Pro 4, remote control, 2.4GHz

€49.99

The RA 3Ch Reflex Stick Pro 4 brings 2.4GHz radio control together with a classic stick layout for model driving that calls for direct, proportional input. With 3 channels and 2 continuously adjustable, fully proportional control paths, steering and throttle commands can be metered with fine control, while channel 3 is switched in 2 positions for a clear auxiliary function. Channel 1 includes dual rate to adjust servo travel, which helps match the steering response to different model setups. Servo reverse changes the direction of movement for the channels when the installation requires it, and the trim function for channels 1-2 supports accurate neutral settings. The transmitter operates at 4.8-6 V with 4 AA cells, and the receiver power supply allows up to 11 V without BEC. The connector system uses Futaba/Graupner J/R, giving the set a clear interface for compatible RC components. The set includes the 3-channel remote control, a 4-channel receiver and a manual. An LED battery status indicator keeps the transmitter charge level in view during running sessions, while the failsafe system provides a defined response if the radio link is lost. Age 14 Years+  Warning! Not suitable for children under 14 years.

Remote-controlled systems

RA 4Ch Reflex Stick Pro 4, remote control, 2.4GHz

€64.99

The RA 4Ch Reflex Stick Pro 4 2.4GHz LCD brings 4-channel control and detailed setup functions into one radio system for model driving from age 14 years. Its LCD layout supports direct access to key settings, while 15 model memory slots keep multiple vehicle configurations stored and ready for use. Two fully proportional channels allow continuously adjustable steering and throttle input, and 2 additional switch channels handle special functions on compatible models. Channels 1 and 2 can be tuned with servo reverse, trim, dual rate, EPA and EXP, giving clear control over direction, centre position, servo travel limits and response curve. The integrated failsafe system adds a concrete control safeguard for supported setups. The transmitter operates at 4.8 to 6 V with 4 AA cells, and the connector system uses Graupner J/R. A 4-channel receiver is included, so the system can move straight into installation on a suitable model. The receiver power supply supports up to 11 V without BEC, which suits a wide range of hobby configurations. This combination fits model-building enthusiasts who want one radio system for several vehicles, special functions and fine setup work at the bench or track.  Warning! Not suitable for children under 14 years.

Catalogues & merchandise

RC Catalogue 2026/27 Models Supplies

€5.49

This printed RC catalogue gathers the Carson Modelsport 2026/27 range into a bilingual German and English reference format for model and accessory browsing. As a physical catalogue rather than a vehicle or spare part, it serves as an overview source for checking lines, categories and range structure in one place. The product data identifies the catalogue within Models & Accessories and Models Supplies, which frames it as reference material for the hobby rather than as running gear or workshop equipment. The 2026/27 designation gives it a clear edition context, while the GER/EN format supports reading across 2 languages without switching between separate versions. Because the data does not list page count, dimensions or included extras, the copy stays with the confirmed facts: printed catalogue, bilingual content and range-reference function. It fits naturally into bench-side planning, desk browsing or quick range checks when comparing model families and accessory groups. In hobby spaces where a screen is not the first choice, the catalogue provides an offline source for orientation within the Carson Modelsport assortment.

RC remote controls

RC-Reflex Pro 3 Electric Set, RC radio system

€124.99

The RC-Reflex Pro 3 Electric Set brings the core electronics for an RC ground model into one coordinated package. A 2-channel 2.4 GHz transmitter works with a 4-channel mini receiver to handle steering and throttle commands, while the pistol-grip layout supports one-handed control with a trigger and side wheel format familiar in car-based RC setups. Alongside the radio link, the set includes a CS-6 steering servo for installation in a compatible model and a 7.2 V 3000 mAh drive battery for the vehicle itself. The Expert Charger is part of the set, and 4 AA transmitter batteries are also included for the handset. This combination suits fresh builds, replacement electronics, or an upgrade from older radio gear where the main control components need to be assembled in one step. With 2 frequency channels and 16 listed parts, the set covers the central functions needed to equip a model for radio-controlled driving. In use, the electronics set fits naturally into workshop preparation before a chassis goes to the track, car park or garden path. The included components support installation, charging and control in a format aimed at hobby-focused RC driving, whether for a first compatible setup or as a practical replacement package for an existing model.  Warning! Not suitable for children under 14 years.

RC remote controls

REFLEX STICK PRO 3.1, radio set, 2.4GHz

The REFLEX STICK PRO 3.1 Elektro Set brings the core electronics for an RC model into one coordinated package, centred on a 2-channel 2.4GHz radio system with fully proportional control. Steering and throttle inputs respond progressively rather than in fixed steps, which supports cleaner line control on the track, at the workbench, or during first setup runs. The transmitter operates on 4.8-6V and uses a stick layout familiar across many hobby-grade applications. Beyond the radio itself, the set combines a 2.4G receiver, a CS3 servo, a 7.2V 2500mAh racing pack, a USB charger with 7.2V 250mAh output, and 4 AA Ansmann batteries. Servo reverse is available on both channels, so steering or throttle direction can be corrected directly at the transmitter when the installed linkage runs opposite to the intended movement. The steering and throttle trim functions help dial in neutral position and straight tracking, while dual rate on the steering channel allows reduced or expanded steering travel depending on the model's response. A charging socket with positive pole inside and an LED battery charge status indicator add clear handling details during use. The plug system is compatible with Futaba and Graupner JR, which broadens integration across common RC installations. In a touring car, buggy, boat, or similar hobby build, the set covers the key radio and power components needed to move from installation to controlled running with matched electronics.  Warning! Not suitable for children under 14 years.

RC receivers and accessories

Reflex Stick Pro 4 WP Receiver, RC receiver

€51.99

Functional RC models often depend on more than steering and throttle alone, and this 15-channel receiver is built for that broader control layout. Operating in the 2.4 GHz frequency range, the Reflex Stick Pro 4 WP receiver is designed as a replacement unit for compatible Carson radio systems while keeping the electronics package compact at 52 x 32 x 13 mm. The 15 available channels create room for models that use several separately controlled functions, such as truck equipment or specialty vehicle features that need their own signal paths. Its 15 g weight helps when chassis space is already shared with servos, linkages and wiring, because the receiver can be integrated without taking over the layout. The compact format also suits installations where bodywork, interior parts or scale details leave little free room around the radio compartment. Compatibility is stated for the Carson FS 14K Reflex Stick Pro 4, FS 14K Reflex Stick Pro 4 LCD and FS 15K Reflex Stick 4 Pro LCD-MFC 2.4 GHz remote controls. In workshop use, it fits as a direct replacement when an existing radio setup needs the same control architecture again. In running sessions with function-heavy RC trucks or specialist builds, the 2.4 GHz system supports stable command transfer across the model's multiple control tasks.

RC remote controls

REFLEX XS 2.4GHz Transmitter, RC controller

€25.99

The REFLEX XS 2.4GHz transmitter brings classic wheel-style RC control to compatible XS-Chassis models with a compact pistol-grip format, a side steering wheel and a trigger for throttle and brake input. The black and dark grey housing keeps the layout focused, while the 2.4GHz system suits interference-conscious driving sessions where clean radio control matters. Its control concept follows the familiar car transmitter arrangement: the foam-covered wheel handles steering input, and the trigger manages acceleration and braking through one hand position. Visible setup markings such as REV, ST, TH and D/R point to onboard adjustment functions that support model-specific tuning rather than a fixed one-setting layout. The top section also carries additional adjustment points, giving hobby users direct access to setup changes on the transmitter body. This transmitter is intended for CARSON XS-Chassis references 500404360, 500404361, 500404362, 500404363, 500404252, 500404253, 500404254 and 500404255. The 14 Years age marking is stated in the product data. In the workshop, at the track or on a casual driving surface, the wheel-and-trigger format keeps steering and speed control close together for responsive handling on compatible RC vehicles.

RC electric motors & controllers

REFLEX-XS ESC/RX Unit, RC electronics for XS-Chassis

€39.99

The REFLEX-XS ESC/RX unit is a dedicated electronics replacement for Carson XS-Chassis vehicles in 1:10 scale, combining ESC and receiver functions in one compact module. With its XT60 plug connection, it is set up for the stated chassis family and supports a clean return to the original control layout when an existing unit needs to be replaced. This spare part is assigned to the Carson XS-Chassis range under the references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The listed vehicles include Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants, which makes the unit a precise match for several models within the same platform. As an ESC/RX combination, it brings two core electronics functions together in one component, which helps keep the installation focused on the chassis system named in the data rather than on mixed standalone parts. Within workshop use, this unit suits repair, maintenance and platform-specific replacement work on compatible Carson models. The 14 years and up marking is stated in the product data, and the part sits in the model supplies area for hobby-oriented vehicle upkeep and running repairs.

Model tools

RubberEdge Brush 0 Cone Model Supply

€9.89

RubberEdge Brush 0 Cone is a model supply shaped for detail-led hobby work, combining a 0 size with a cone tip profile for controlled application on small sections. The single-brush format keeps the contents straightforward when a specific shape is needed for a modelling bench or as a direct replacement within an existing tool set. The product data identifies this brush as 1 piece and states an assembly time unit, voltage unit and operating time unit, but gives no corresponding values, so the usable focus stays on the named brush format itself. Within that format, the cone shape points to narrow contact areas and more exact placement than a wider brush head allows. The 0 designation further anchors it as a fine-detail option within model supplies, suited to tasks where a compact tip matters more than broad coverage. The product data also states that batteries are not included, with no battery-driven function indicated for the brush. On a hobby table, this brush fits neatly into careful finishing sessions, touch-up work and other small-scale application steps where a defined tip shape helps keep the working area tight. The age marking in the data is 14 Years.

Model tools

RubberEdge Brush 0 FlatEdge Model Brush

€9.89

RubberEdge Brush 0 FlatEdge brings a focused tool format to detailed model finishing, with a size 0 profile and a flat edge that supports controlled paint placement on small sections and defined lines. In careful bench work, that shape helps keep strokes deliberate when edges, contours or compact painted areas need a tidier pass than a broader brush can provide. The product data identifies a single brush, so the setup stays centered on one dedicated painting tool rather than a mixed assortment. The FlatEdge form lends itself to measured coverage across short runs, while the size 0 format suits tighter working zones where larger tips can overwhelm the area. For hobby routines that involve touch-ups, trim painting or small visual accents, this brush adds a precise option to the painting kit. Age marking 14 Years is stated in the product data. Paints are required separately. On a model-building table, RubberEdge Brush 0 FlatEdge fits neatly into finishing stages such as edge work, small corrections and compact color application. It also works well as a dedicated brush kept aside for narrow painted details during repeat workshop sessions.

Model tools

RubberEdge Brush 0 TriEdge Model Brush

€9.89

The RubberEdge Brush 0 TriEdge brings a focused painting tool to model finishing, with size 0 shaping aimed at narrow edges, small contours and controlled detail work. Its single-brush format suits hobby benches where careful paint placement matters more than broad coverage. The TriEdge form supports deliberate strokes around borders and tight sections, making it useful for trim lines, touch-ups and small painted accents on model parts. RubberEdge naming points to an edge-oriented brush concept that fits jobs where clean separation between painted areas is needed. With 1 brush included, the set stays simple and easy to slot into an existing painting setup without adding unnecessary bulk. The 14 Years marking places it within a hobby-focused range suited to more precise handling and finishing tasks. On the workbench, this brush fits moments that call for accuracy rather than speed, such as refining corners, following narrow outlines or correcting small areas after the main coat has dried. It also works well as a dedicated detailing brush kept alongside other painting tools for repeated fine-line tasks across different model projects.

Model tools

RubberEdge Brush 0, model brush, BaseCurve

€9.89

RubberEdge Brush 0 BaseCurve brings a specialised shape to model painting, combining a 0 brush size with a BaseCurve profile for controlled work on edges, contours and smaller painted sections. In model finishing, that focused format helps paint follow shaped lines more cleanly than a broader brush intended for larger areas. As part of the model supplies range, this brush suits detail-led tasks where narrow coverage and careful placement matter. The RubberEdge naming and BaseCurve designation point to a brush designed around edge work rather than general broad coverage, making it a useful addition for trim areas, fine borders and touch-up stages within a paint session. The stated age marking is 14 Years. Batteries are not included, and no battery function is indicated for this brush. On the workbench, the compact 0 size supports slower, more deliberate brush control when a model build reaches the painting and finishing stage. It fits projects that call for neat colour placement around curved forms and defined edges, whether refining a single section or completing final painted details.

Model tools

RubberEdge Brush 2 BaseCurve Model Supply

€10.29

RubberEdge Brush 2 BaseCurve is a model supply component named for precise identification within a hobby setup. The single-piece format keeps the focus on one clearly defined part, which matters when a bench stock list depends on exact designations rather than broad category labels. The product data states an assembly time unit in minutes, a maximum operating time unit in Minutes, a voltage unit in Volt and a maximum speed unit in km/h, but no verified figures are provided for this component. That leaves the confirmed substance of the listing in its exact name, its placement in Models & Accessories and Models Supplies, and its quantity of 1. For hobbyists managing repairs, replacements or planned builds, that exact naming helps separate this part from similar workshop supplies and supports cleaner reordering when a project calls for the same component again. Minimum age is stated as 14 Years. Batteries are not included. On a parts shelf, in a repair tray or alongside other model supplies, the single RubberEdge Brush 2 BaseCurve component can be kept ready for maintenance tasks where the exact part name is the key reference.

Model tools

RubberEdge Brush 2 Cone Model Supplies

€10.29

RubberEdge Brush 2 Cone is listed as a model supplies accessory within the Carson Modelsport range, giving RC and scale-model workbenches a clearly named part for maintenance and workshop organisation. The short designation identifies this version as 2 Cone, which helps distinguish it from other supply parts when replacements or matching workshop stock are being selected. The available data supports a focused, factual profile rather than a broad feature list. This accessory belongs to the Models & Accessories area and sits specifically in Models Supplies, placing it in the practical side of hobby work where clearly identified parts matter. The age marking is 14 Years. Batteries are not included in the data, and no separate runtime, speed, voltage, dimensions, or pack contents beyond the stated designation are confirmed here, so the copy stays with the verified information. On the bench, a clearly labelled supplies part helps keep repair, upkeep, and parts sorting straightforward across ongoing RC and model-building sessions. It fits naturally into workshop routines where the exact accessory name matters as much as the part itself when planning replacements or maintaining a consistent stock of supplies.

Model tools

RubberEdge Brush 2 FlatEdge Model Supply

€10.29

RubberEdge Brush 2 FlatEdge is a model supply built around a clearly defined brush format for painting and finishing work. The name points to a flat-edge brush shape, giving hobby benches a focused tool for controlled paint placement on edges, lines, and smaller sections where a broader brush can feel less exact. As a single brush, it suits restocking a specific tool rather than replacing a whole set at once. That makes it easy to keep a dedicated brush ready for touch-ups, detail passes, or careful coverage on parts that call for a flatter contact surface. The 14 Years age marking places it in a hobby context where steady handling and deliberate brush movement are part of the process. No battery is included, and none is needed for use. On the workbench, this brush fits neatly into painting sessions that move between base coverage and more precise finishing steps. It also works well as a spare kept alongside other model supplies, ready when a defined flat edge is the better match for the task at hand.

Model tools

RubberEdge Brush 2 TriEdge Model Supply

€10.29

RubberEdge Brush 2 TriEdge is a clearly designated model supply part for hobby-oriented maintenance work. The product data identifies 1 included piece and states an assembly time unit in minutes, positioning this component within a setup where fitting or replacement is part of regular workshop handling. Within a model bench context, a named replacement part like this helps keep compatible equipment in service when an existing brush reaches the end of its usable life. The designation TriEdge gives this component a distinct identity inside the range, which matters when matching spare parts accurately to an established setup. The product data also states that batteries are not included, confirming that this listing is not a powered ready-to-run vehicle but a supply component in the models and accessories area. The age marking is 14 Years. Used as part of routine upkeep, a replacement brush belongs in the practical side of model ownership alongside fitting, checking and returning compatible equipment to operation. For hobbyists managing wear parts and workshop stock, a single replacement piece keeps the purchase focused on a specific maintenance task rather than a broader bundle.

RC servos

Servo CS-9, RC servo, waterproof metal gear

€22.99

The CS-9 brings regular-size servo control to model builds that need quick response, a waterproof housing and a straightforward JR connection. Its black and blue case, top output shaft and 3-wire lead suit a wide range of RC installations where compact control hardware needs to translate radio commands into clean mechanical movement. Inside the housing, the metal gear transmission is built for repeated steering or control inputs, while the 9 kg rating and 0.1 speed support fast actuation in demanding hobby setups. The included servo horns expand the mounting options at the spline: a single-arm horn and a 4-arm cross horn provide different linkage positions, and the set also includes rubber grommets and a mounting screw for installation. The regular-size format makes the servo a useful choice across different model categories where a standard servo bay is part of the layout. Age 14 Years is stated for this servo. In RC cars, the CS-9 can handle steering duties where quick centring and firm linkage control matter through corners and surface changes. In boats, aircraft or robotics projects, the same servo format supports control surfaces or moving functions that rely on compact dimensions, a JR plug and waterproof construction.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Spare Battery Cage Fighter, battery, 7.4 V JST

€9.99

This spare battery is made for the Cage Fighter platform and adds a defined power option for RC running sessions with a 7.4 V LiIon setup. The rechargeable pack combines a compact format with a fitted JST plug connection, so it matches the stated connection type for the compatible vehicle range. The product data names 600 mAh capacity and identifies the battery as suitable for 2 specific 1:10 models: 500404302 Cage Fighter 2.4GHz 100% RTR green and 500404303 Cage Fighter 2.4GHz 100% RTR orange. That clear model assignment helps avoid guesswork when replacing a used pack or keeping a second battery ready between runs. As a spare battery, it focuses on the core requirement of the vehicle setup: the correct voltage, the correct connector and compatibility with the named Cage Fighter versions. In practical use, the battery can serve as a replacement for an existing pack or as an extra unit kept ready for the next outing with the model. The single included content is 1 spare battery, making it a straightforward choice when the setup calls for the stated 7.4 V LiIon format and JST connection.  Warning! Not suitable for children under 14 years.

RC helicopters

Starter Tyrann 230, RC helicopter, IR 2Ch RTF

€20.99

The Starter Tyrann 230 brings compact helicopter flying into an easy indoor format with a 2-channel infrared control system, a 225 mm length and a low 31 g weight that keeps handling light and approachable. In cyan trim, the ready-to-fly layout creates a clear first step into RC flight while the switchable LED position indicators add visible orientation during movement. Left and right trim adjustment allows the flight path to be fine-tuned directly from the transmitter, which helps maintain cleaner hovering and steadier directional control in smaller rooms. The 180 mm rotor diameter gives the helicopter a balanced rotor footprint for controlled lift, while the 10 km/h speed limit keeps the pace manageable for learning basic manoeuvres. A 3.7 V 150 mAh LiPo flight battery powers the model, and charging runs through the included USB charger rather than a separate charging station. The set includes the ready-to-fly helicopter, the IR remote control system, the flight battery and the charger. 4 AA batteries are required separately. With a height of 97 mm, the helicopter stays compact enough for living rooms, hobby spaces or bedroom flight sessions where short take-offs, hovering practice and gentle turns are the focus. The combination of low weight, onboard lighting and trim control suits repeated indoor runs that build confidence with each battery cycle.

RC helicopters

Toxic Spider 340, RC helicopter, 100% RTF

€39.99

The Toxic Spider 340 100% RTF combines a coaxial rotor system, intelligent gyro electronics and a compact indoor format in one ready-to-fly RC helicopter. Black and green styling, illuminated LED headlights and a top speed of 10 km/h give each flight a crisp, technical presence as the model lifts from its landing skids and settles into stable hovering. Its 2.4 GHz remote control system works with 3.5 channels, allowing coordinated inputs for ascent, descent, turning and directional correction. The aluminium tail boom adds a light, rigid rear structure that supports balanced handling in the air. A 3.7 V 400 mAh LiPo flight battery powers the helicopter for up to 8 minutes, giving enough time for repeated take-offs, short circuits and hover practice. Included in the set are the ready-to-fly model, the remote control system, the LiPo flight battery, a USB charger, 3 transmitter batteries and instructions. The age marking is 12 years and up. Indoor sessions suit the Toxic Spider 340 especially well, whether the focus is on learning steady hover control in a living room or linking smooth turns through open space in a hallway. With the charging gear and transmitter batteries already included, the set brings the key flying components together in one box for immediate RC action after charging.

RC carrying bags

Transport Bag Blue, RC bag, 55 x 30 x 25 cm

€32.99

A transport bag with 55 x 30 x 25 cm dimensions brings practical storage to RC sessions, club evenings and home organisation. The blue bag is sized for standard 1:10 RC cars and creates a tidy way to move a model together with the equipment that belongs with it, instead of splitting everything across separate cases. The nylon fabric is described as hard-wearing and keeps its shape, so the bag stays structured rather than slumping when it is only partly filled. That makes the opening easier to access when packing a chassis after a run or setting out tools before maintenance. Reinforced seams add support where the load pulls most, which matters when heavier RC gear is carried regularly. The format also suits dust-protected storage between driving sessions, with enough room to keep commonly used track equipment close to the model instead of stored separately. Carson blue and the printed Tamiya and Carson logos give the bag a clear workshop character that fits naturally into model-building and RC environments. Whether it travels to the race track, goes along to a model club meeting or stays on a shelf in the hobby room, the bag keeps RC equipment grouped, easier to handle and ready for the next outing.

RC carrying bags

Vehicle Carrying Bag, RC transport bag, 55 x 30 cm

€17.99

This blue vehicle carrying bag brings RC transport and storage into one clear format, with a 55 x 30 x 35 cm footprint sized to hold a model between workshop, car and running location. The nylon outer material is water-repellent and gives the bag a practical layer against splashes and damp conditions during routine handling. The carrying system is built around all-round nylon handles that wrap around the entire bag, rather than relying only on stitched side points. That construction supports the bag more evenly when lifted and helps maintain stability under the weight of the contents. The blue finish is paired with Tamiya and Carson logos, giving the bag a recognisable motorsport look that fits naturally into an RC setup. 14 years marks the recommended age. Used as transport to the track, as a storage place between sessions, or as a way to keep one vehicle separate from other workshop gear, the bag supports a more organised RC routine. Its rectangular shape also makes it straightforward to place in a car boot, on a shelf, or beside a workbench when the model is not in use.

RC tires & rims

Virus Race/Beat Warrior Wheels, model wheels

€36.99

Virus Race/Beat Warrior Wheels brings a focused replacement set to the workshop with 4 matching wheels made for the named Carson models. The set is aimed at model-building enthusiasts who keep running gear in working order and want a direct component match instead of trial-and-error parts selection. Because the product data identifies these wheels specifically for Virus Race and Beat Warrior, the set fits naturally into routine maintenance, repair after wear, or a rebuild that needs the correct wheel group on hand. The 4-piece format covers a full vehicle wheel change in one pack, which keeps the swap straightforward when all corners need the same component. With the age marking of 14 Years, the set sits in the hobby-focused side of the range rather than general toy use. The concise designation also makes this a practical shelf spare for existing compatible models. In a workshop setting, the wheel set supports quick replacement before the next driving session or during a larger overhaul of a used chassis. It also suits parts storage for hobby collections where compatible running components are kept ready for service work.

Pinions & gears

Virus Rocket 120 Diff, RC spare part, front rear

€49.99

The differential is one of the key working parts in an RC drivetrain, balancing torque between the driven sides while the transmission stays under load. This Virus Rocket 120 front and rear diff is built as a dedicated spare part for the model and brings the drivetrain back to a functional mechanical setup with a compact, preassembled unit. At the centre sits a red anodized housing, flanked by black outdrives and metal shaft interfaces that connect the assembly into the drive system. A large toothed gear on one side feeds power into the differential, while the bearing-supported ends are designed for controlled rotation inside the transmission layout. Visible hex socket screws secure the end plate, and the geared construction gives model-building enthusiasts a concrete replacement part for repair benches, rebuilds and routine drivetrain servicing. The 14 Years age marking is stated in the product data. This spare part suits workshop sessions focused on restoring drive function after wear in the front or rear transmission area. It also fits maintenance builds where a complete differential assembly is needed instead of replacing individual internal parts one by one.

Pinions & gears

Virus Rocket 120 middle diff drivetrain part

€53.99

The Virus Rocket 120 middle diff sits at the heart of the drivetrain, linking front and rear drive sections through a compact geared assembly. A large metal spur gear meshes into the transmission system, while the red anodized centre housing contains the differential mechanism and connects to black output shafts on both sides. Visible ball bearings support the rotating shafts and help the assembly run with controlled, even movement inside the drivetrain. The screw-fastened construction gives clear access to the unit for servicing, replacement or rebuild work when a running setup needs fresh transmission parts. The flattened shaft ends are shaped for coupling into the surrounding drive system, so the assembly is ready to slot into the matching vehicle layout. As a model vehicle spare part rather than a complete car, it focuses on one job: distributing rotational force through the centre of the transmission. In workshop use, this component fits naturally into repair benches, rebuild sessions and parts boxes for hobby-grade RC maintenance. It suits enthusiasts keeping a Virus Rocket 120 ready for the next run, whether the goal is restoring drive transfer after wear or replacing a key transmission assembly during a full drivetrain overhaul.

RC speed boats

Waveracer Jet, RC boat, 2.4GHz 100% RTR

€89.99

The Waveracer Jet brings compact RC boat action to calm water with a jet drive, a Type 390 brushed motor and LED lighting on the deck. At 442 mm long, 96 mm wide and 85 mm high, the hull combines a slim profile with a low weight of 599 g, giving the boat a lively, controlled feel across ponds, lakes and sheltered stretches of water. The 100% RTR format arrives pre-assembled with a 2.4 GHz remote control, a 7.4 V 2000 mAh Li-Ion battery, a USB charger, 3 x LR06 batteries and a boat stand. Integrated water cooling supports the electric motor during running, and the waterproof upper deck opens quickly through quick-release fasteners when access is needed. Water-protected electronics keep the key control components shielded during use, while the digital proportional system translates steering and throttle inputs with fine control rather than fixed steps. The boat reaches up to 20 km/h, runs for 12 minutes and charges in 3.5 hours. Ages 14+ marks the recommended age. On shallow water, the jet drive helps the boat stay capable where exposed propeller setups are less practical, and the rubber bow protector adds a plain physical buffer at the front during close approaches and recovery at the bank.

LiPo batteries

X4 Cage Autostart battery, 3.7V LiPo pack

€11.99

The X4 Cage Autostart battery brings the specified 3.7 V LiPo power pack and 220 mAh capacity needed for compact RC use into one small-format unit. Its silver pouch-cell format, red and black connection leads, and white 2-pin plug create a layout that fits neatly into model setups where every millimetre of space counts. With an energy rating of 0.81 Wh, this rechargeable battery is defined by clear electrical data rather than vague compatibility claims. The cable-mounted connector supports straightforward installation in matching systems, and the lightweight pack format suits small vehicle platforms and model electronics that rely on a compact power source. The visible warning tag attached to the lead marks a handling instruction directly on the battery assembly, keeping the operating note close to the connector itself. Batteries are not included beyond this listed battery pack. In use, the pack suits replacement duty for the X4 Cage Autostart and similar compact applications where the required voltage and connector format need to match exactly. For hobby benches, pit boxes, or regular running preparation, it adds a clearly specified LiPo option that keeps compatible RC equipment ready for the next session.

RC quadcopters

X4 Quadcopter 210, quadcopter, 2.4G 100% RTF

€39.99

The X4 Quadcopter 210 brings compact RC flying and quick stunt action into a 210 x 140 x 45 mm format that sits easily in one hand and lifts off with a light 44 g airframe. Its 3 speed settings, automatic altitude control and intelligent 6-axis gyroscope function create a stable base for short practice flights, low hovering passes and tighter turns in open spaces. The 2.4 GHz remote control system uses 4 frequency channels for steering inputs, while headless mode keeps the control logic easier to follow when the nose changes direction in flight. Aerobatic mode adds flips for more dynamic manoeuvres, and the Coming Home function returns the quadcopter toward the take-off point at the press of a button. The included set contains the ready-to-fly model, 2.4 GHz remote control system, 3.7 V 300 mAh LiPo flight battery, USB charger, 3 x AAA transmitter batteries, spare rotor blades and instructions. Flying time reaches 9 minutes, with speeds of up to 25 km/h. Age 8+ marks the recommended age for use. The compact dimensions and complete RTF setup suit quick sessions in the garden, at the park or across larger indoor areas where hovering, turns and flips can be practised in short bursts.

RC servos

XS Chassis Servo for RC Models 15 kg

€21.99

The XS Chassis 15 kg servo brings a defined control component to RC model builds where compact installation and solid actuating force matter. With its XS chassis designation and 15 kg rating, it suits layouts that need a servo sized for tighter chassis architecture while still delivering clear mechanical input through the steering or control linkage. Within an RC setup, the servo converts radio commands into physical movement at the chassis, making it a central part of how steering or other linked functions respond in use. The data identifies it as a servo for the XS chassis range, placing it in the core hardware area of model maintenance, replacement and tuning rather than in decorative accessories. This makes it relevant for rebuilds, repairs and planned upgrades where a defined force rating is part of the selection process. Batteries are not included. On the bench, the servo suits projects that call for a compact control unit matched to model hardware in the Models & Accessories field. It also fits routine spare-parts planning for RC collections where a dedicated chassis servo keeps running models ready for the next session.

Li-ion batteries

FE Line Replacement Battery, 7.4V Li-Ion Pack

€19.99

The FE line replacement battery combines 7.4 V output with 2600 mAh capacity in a Li-Ion pack built for compatible electric RC vehicle sets. With 19.24 Wh, it brings a clear energy figure to the setup and supports longer driving sessions when an older pack has lost punch. The battery is equipped with an XHP/TAM connector layout, matching the plug standard stated for the FE line and keeping the connection straightforward for the intended models. As a single replacement pack, it suits maintenance, backup use between runs, or a direct swap when the original battery no longer delivers the same runtime. The Li-Ion format makes this pack a focused choice for hobby users who want a defined voltage and capacity combination rather than a generic spare. In regular RC use, a second battery pack can keep driving sessions moving with less waiting between charges, while a fresh replacement helps bring stored models back into action. The stated 14 years+ age marking places this battery in the hobby segment, where connector type, voltage and capacity matter just as much as fit.  Warning! Not suitable for children under 14 years.

LiPo batteries

7.4V 5000mAh LiPo Battery, spare battery, XT90

€47.99

This 7.4 V LiPo spare battery adds a straightforward power option for compatible RC setups that use an XT90 connector. With 5000 mAh capacity, it is built as a replacement pack for models that need a 2S battery in this specification, keeping the focus on matching voltage, connector type and battery format. The pack is stated as suitable for all 2S and 4S models with an XT90 connector, which gives a clear compatibility reference for hobby use across matching Carson model ranges. The 60C rating shown in the product data adds another technical point for enthusiasts comparing replacement packs for current delivery. The battery is supplied as 1 spare battery, so it can step in for an existing pack or expand the rotation for longer sessions with compatible vehicles. As a LiPo battery, it belongs in setups designed for this battery type and the stated 7.4 V specification. In practice, this spare pack suits workshop shelves, race-day kit bags and regular running sessions where a charged replacement keeps a compatible model ready for the next run. A charger is required separately.  Warning! Not suitable for children under 14 years.

Li-ion batteries

XS Line Tuning Battery, replacement battery, 7.4 V

€19.99

The XS Line Tuning Battery brings a defined 7.4 V Li-Ion power source to compatible Carson Modelsport vehicles and combines 2600 mAh capacity with 19.24 Wh in a compact replacement format. Built as a battery pack with T-Plug and XHP connector, it is matched to the connection layout named for the XS Line. Its stated fitment covers the 1:10 XS Stadium Fighter 100% RTR in blue and orange as well as the 1:10 XS Offroad Fighter Cage 100% RTR in turquoise and rouge. That makes it a focused choice when an existing battery needs replacing or when a second pack is needed for the same compatible platform. The Li-Ion format defines the battery chemistry, while the 19.24 Wh rating adds a clear energy figure alongside the voltage and capacity data. The pack is also marked as fast-charging, with a maximum charging current of 1 C or 2600 mA. In workshop use, the connector combination helps keep the battery matched to the specified XS Line vehicles rather than a broad, uncertain range. For running sessions with the listed 1:10 models, the battery serves as a direct power component built around the exact voltage, capacity and connector details given in the data.  Warning! Not suitable for children under 14 years.

Li-ion batteries

XS-Line XHP/XT60 Li-Ion Battery Pack, 7.4V

€19.99

The XS-Line XHP/XT60 battery pack brings 7.4 Volt Li-Ion power into RC setups that rely on a compact, clearly specified energy source. With 2600 mAh capacity and XHP and XT60 connectors, it is built for compatible model-building electronics where the battery format and plug type need to match the vehicle layout. Li-Ion cell chemistry makes this pack a focused choice for hobby applications that call for rechargeable power in a manageable size. The 7.4V rating suits systems designed for that voltage, while the 2600 mAh capacity gives a concrete reference point when comparing runtime potential within compatible setups. The XHP and XT60 connector combination matters in practice because plug format determines whether the battery integrates cleanly with the existing wiring. Batteries are not included with many RC vehicles, so a separately chosen pack like this becomes a key part of getting a compatible chassis ready for use. On the bench, this battery fits into the preparation stage where voltage, capacity and connector standard have to line up with the electronics already in the model. At the track or on open driving surfaces, it serves as the power source that keeps a compatible RC vehicle running through each session.

Li-ion batteries

FE-Line Battery, RC battery, 7.4 V 1500 mAh

€21.99

The FE-Line battery brings a dedicated 7.4 V power source to compatible Carson RC setups, with 1500 mAh capacity and a Tamiya plug matched to FE Line use. The black Li-Ion pack with attached cables is built as a ready battery unit, making it a clear choice when an existing pack needs replacement or an extra charged unit is kept on hand for the next run. Its lithium-ion cell format combines the stated voltage and capacity in one compact pack, while the cable set includes the main power lead and an additional small connector integrated into the harness. The label identifies the pack as a high performance Li-Ion battery pack, and the visible charging information states a maximum charge current of 1C or 1500 mA. The pack is intended for Carson RC models in the FE Line, so the electrical specification stays aligned with that series rather than relying on a universal fit. Delivery includes the Accu-pack Li-Ion battery. In workshop use, the pack suits routine battery rotation between driving sessions, whether a model is being prepared for a fresh run or an older battery is being replaced with the same voltage and connector standard. The 14 years marking is stated in the product data, and the battery format fits naturally into hobby-focused RC maintenance and running setups.

Li-ion batteries

7.4V 500mAh LiIon Battery, spare battery, JST

€9.99

A spare battery keeps compatible RC vehicles ready for the next run, and this LiIon pack is built around the exact core figures that matter: 7.4 V, 500 mAh and a fitted JST plug connection. The compact battery format suits Carson RC Sport models that use this specified power source. The pack is listed as suitable for the 1:12 Glow Devil 2.4GHz 100% RTR red and the 1:12 Glow Rider 2.4GHz 100% RTR blue. In addition to the voltage and capacity, the battery carries a 3.7 Wh energy rating and uses rechargeable LiIon chemistry. The attached lead and connector provide the physical link to the vehicle's matching battery socket, which is the key point when replacing a worn or depleted pack. As a dedicated spare battery, it supports quick battery swaps between driving sessions without changing the vehicle setup. Kept charged and stored with the connector unplugged, a second battery pack can simplify preparation before track time or casual RC driving. For hobby benches, pit bags or shelf storage with compatible 1:12 models, this battery adds a straightforward replacement option when the original pack needs backup or renewal.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Easy Charger NiMH/LiPo 4A, RC charger, 50W

€45.99

The Easy Charger NiMH/LiPo 4A brings fast, controlled battery charging to RC workbenches and race-day setups with 50 W output power and 4 selectable charging levels. Compact dimensions of 108 x 68 x 38 mm keep the unit easy to place beside tools, spares and running gear while charging sessions stay clearly focused on the battery in use. NiMH packs with 4 to 8 cells and LiPo batteries from 2 to 4S are supported, covering common drive-battery formats used in many radio-controlled models. The charging process can be set to 0.5 A, 1 A, 2 A or 4 A, which helps match the charger to different pack capacities instead of relying on a single fixed rate. Delta Peak cut-off is integrated for NiMH batteries, adding a defined stop point during charging. AC 100-240 V input allows connection to standard mains power across a wide voltage range. Included contents are the charger, power cable, XT60 to Tamiya adapter cable, XT60 to XT90 adapter cable and manual. At 231 g, the unit stays easy to carry between shelf, pit table and home setup, where compact size and broad battery support help keep RC sessions moving with less downtime between runs.  Warning! Not suitable for children under 14 years.

Chargers & charging cables

Expert Charger Twin LiPo, charger, USB-C 2A

€27.99

The Expert Charger Twin LiPo USB-C 2A is built for RC setups that run on 7.4V Lithium Polymer 2S packs and need a compact charging station with 2 channels. Powered through USB-C, the charger connects with the included USB-C to USB-C cable and charges 2 batteries simultaneously through its twin layout. Each channel uses the XHP balancer plug system, matching 2S LiPo battery formats used across many RC applications. A maximum charging current of 2 x 2A and output power of 18W give the unit a clear role as a practical bench or travel charger for regular battery rotation. Automatic shut-off adds a defined end point to the charging process once the cycle is complete. The charger, USB-C to USB-C charging cable and instructions are included. With 110-240 Volt input compatibility, the charger fits neatly into hobby spaces where compact equipment and straightforward handling matter. The dual-channel format suits driving days with a spare pack ready, workshop charging between runs, or keeping 2 matching batteries prepared for the next session.  Warning! Not suitable for children under 14 years.

RC remote controls

Reflex Wheel Pro 4, RC radio set, 2.4 GHz

€109.99

The Reflex Wheel Pro 4 electric set brings wheel-style RC control, core onboard electronics and matched power components together in one package for 2.4 GHz model operation. With a 3-channel transmitter, a 4-channel mini receiver, a 6 kg CS6 servo and a 7.2 V 3000 mAh NiMH drive battery, the set covers the central functions needed to equip an electric RC vehicle for hobby use. The transmitter runs on 3.6 to 4.5 V and uses an ergonomically angled 4° steering wheel position for a natural hand layout during longer driving sessions. Channel 3 can be programmed as a switch or button function for a servo, adding another control option beyond steering and throttle. The receiver power supply supports 3.5 to 10 V without a BEC, and the nano receiver is waterproof for installation in models exposed to wet running conditions. A ball-bearing control unit supports precise steering input, while the LED battery status display keeps the charge state visible during setup and use. The included charger is designed for NiMH packs with 4 to 8 cells and delivers up to 2 A output power. Uni connector system compatibility for Futaba and Graupner-J/R broadens integration with existing RC equipment, making the set a strong base for electric model builds, upgrades and replacement radio installations. Age 14+  Warning! Not suitable for children under 14 years.

LiPo batteries

11.1V 4500mAh 60C LiPo Battery, RC battery

€62.99

This 11.1 V LiPo spare battery brings a focused power upgrade to compatible RC setups, pairing 4500 mAh capacity with a 60C discharge rating for model use. The XT90 plug connection keeps the fit aligned with vehicles that already use this connector, while the hardcase format shown in the product image suits the demands of RC running and transport. Beyond the headline figures, the pack is built around a rechargeable LiPo format with 49.95 Wh stated on the label and a maximum discharge current of 270 A. The product image also shows a white balance connector alongside the main XT90 lead, supporting balanced charging with suitable equipment. Charging data on the label states a maximum charging current of 4.5 A, giving experienced hobby users a clear technical reference for setup and handling. As a replacement battery, it is intended for all 3S and 6S models with XT90 connector as stated in the product data. In practice, this battery fits naturally into workshop shelves, pit bags and regular running sessions where a compatible RC vehicle needs a fresh power pack on hand. Age marking: 14 Years.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Demolisher JST-4 Li-Ion Battery, RC accessory

€15.99

The Demolisher JST-4 Li-Ion battery brings a focused power upgrade to compatible RC running with 7.4 V output, 500 mAh capacity and a compact rechargeable format built for model use. Its 3.7 Wh energy rating and shrink-wrapped pack layout keep the setup neat inside the vehicle while the red and black lead routes power through a JST-4 connection. This battery is designed as an accessory for the Demolisher and gives hobby users a clearly specified replacement or spare pack rather than a vague universal fit. The technical data names a maximum charging current of 0.5 A, making charger matching more precise during workshop prep. The pack is a Li-Ion type, so it suits RC setups where low pack weight and rechargeable convenience matter during repeated driving sessions. Because the battery is not included with every vehicle configuration, this separate pack can also serve as a practical second unit for rotation between runs. In use, the battery fits naturally into the rhythm of charging, connecting and heading back out with the model once the previous pack is depleted. It also works well as a bench spare for maintenance days, test drives and quick power swaps when a compatible Demolisher setup is already in service.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Tenzu, replacement battery, 7.4V Li-Ion pack

€19.99

The Tenzu replacement battery is specified as a 7.4V Li-Ion pack with 1200 mAh capacity, giving compatible RC vehicle setups the exact electrical format named in the product data. As a dedicated spare battery, it fits naturally into hobby use where one pack is in the model while another is prepared for the next session. Its ShortDescription identifies the pack directly as a Tenzu battery, while the replacement designation makes its role clear within an electric RC setup. The 7.4V voltage and 1200 mAh rating provide concrete reference points when matching the battery to the required system, avoiding guesswork around the power format. Because this is a battery-only offering, the focus stays on the core specification rather than bundled extras. The Li-Ion construction places it in the rechargeable battery category used across many modern RC applications. In practice, this battery suits the bench as a ready spare and the field as a quick swap option for compatible models. The 14 Years age marking is stated in the data, aligning this power component with hobby-oriented RC use rather than toy-style entry products.

LiPo batteries

3.7V 300mAh LiPo Flight Battery, RC accessory

€18.99

This 3.7 V 300 mAh LiPo Flight battery is built for compact RC applications that need a small rechargeable power source with clearly stated output. The 1.11 Wh rating, red and black lead wires, and white 2-pin connector make its electrical layout easy to identify at a glance. As an RC accessory, it focuses on the essentials: a lithium polymer cell, a wired connection, and a plug format suited to compatible small-scale electronics. The slim battery pack shown in silver foil with amber tape is shaped for installations where space is limited and cable routing needs to stay tidy. That makes it a practical replacement when an existing battery has reached the end of its service life, and a useful spare when one charged pack is not enough for the full session. The printed specification label keeps voltage and capacity visible during setup, charging, and storage. In use, the battery fits naturally into flying or driving sessions with compatible Carson RC models that require this format. Kept as a second pack in the workshop or field box, it helps keep compatible models ready for the next run once the first battery is back on charge.

Chargers & charging cables

Expert Charger NiMH/LiPo 4A, charger, 50W

€44.99

The Expert Charger NiMH/LiPo 4A brings compact charging control to RC bench setups with support for LiPo, LiHV, LiFe and NiMH battery types. With selectable current levels from 0.5A to 4A and a maximum output of 50W, it covers everyday charging tasks from smaller packs to higher-demand battery routines. Its cell support spans LiPo 2-4S and NiMH 5-8 cells, giving the charger a useful range for different vehicle classes and battery formats. The front-panel operation is built around clear mode and current selection, while the status LED keeps the charging state visible during use. Automatic shut-off completes the process once charging is finished, adding a practical control feature for regular workshop use. Input voltage from 110V to 240V allows connection to common mains supplies without extra complexity. Included components are the charger, a mains cable, 1 adapter cable XT60 to NiMH, 1 adapter cable XT60 to T-plug, and instructions. On the workbench, in the hobby room or alongside RC running sessions, this charger fits neatly into battery care routines where several pack types and connector formats need one compact charging solution.  Warning! Not suitable for children under 14 years.

RC combustion engines & glow plugs

Glow-plug Battery 1.2V 2000mAh Accessory

Nitro RC engines rely on a dependable ignition source, and this 1.2 V glow-plug battery is built for exactly that task. With a 2000 mAh capacity, it serves as a dedicated power unit for compatible glow igniters in model workshop and trackside use. As a models supplies accessory, the battery fits naturally into RC maintenance and running equipment where engine starting is part of the routine. The stated 1.2 V output defines the electrical specification clearly, while the 2000 mAh figure gives a concrete reference point for capacity when planning charging cycles and spare equipment. The compact format of this kind of accessory makes it easy to keep alongside other nitro starting gear without taking attention away from the main model itself. No batteries are included. Whether used as a replacement battery for existing glow-plug equipment or kept ready as a spare for longer driving days, this accessory supports the practical side of nitro model operation. The age marking is 14 years, placing it within hobby-focused RC use where technical accessories and engine preparation are a regular part of the session.

NiMH batteries

7.2V 3000mAh NiMH Race Battery, RC battery

€28.49

Built for RC use, this 7.2 V NiMH race battery combines a 3000 mAh capacity with a format suited to electric model applications. The pack is designed for RC vehicles and can also be used in other model building setups, giving hobby benches a practical power source for regular running and replacement needs. The nickel-metal hydride cell chemistry offers a rechargeable battery option for compatible systems, while the Tamiya connector system provides the matching plug format for suitable models and electronics. A maximum charging current of 3 A supports faster charging when used with an appropriate charger. The pack is also designed for high current discharge, which makes it suitable for applications that call for stronger power delivery under load. Age marking: 14 years. On the track, in the pit area, or as part of a prepared spare setup, the battery pack fits naturally into RC routines where charged packs need to be swapped and returned to service efficiently. For workshop use beyond cars, it also suits model building applications that require a 7.2 V rechargeable power source with Tamiya connection.

Li-ion batteries

7.4V 1300mAh Li-Ion Battery, RC accessory

€17.99

A 7.4 V Li-Ion battery pack with 1300 mAh capacity brings a clear, usable power specification to compatible RC model setups. With an energy rating of 9.62 Wh, this Carson RC Sport accessory is aimed at hobby applications that need a dedicated rechargeable pack rather than a disposable power source. The stated values make battery matching more straightforward when a model is designed for a 7.4 V pack, and the 1300 mAh capacity defines the pack within a compact RC power class. As an accessory in the powered vehicle range, it fits naturally into workshop shelves alongside running gear and charging equipment for electric model use. The rechargeable Li-Ion format supports repeated use across driving sessions, whether the battery serves as a replacement pack or as part of a regular rotation between runs. Product data states that batteries are not included. In practice, this kind of pack suits hobby users who keep compatible RC vehicles ready for the next outing or maintain a second power unit for less downtime between sessions. The clearly stated 7.4 V, 1300 mAh and 9.62 Wh figures give model builders concrete reference points when checking fit within an existing electric RC setup.  Warning! Not suitable for children under 14 years.

LiPo batteries

Easy Skydreamer LiPo Battery, spare battery 3.7V

€7.99

The Easy Skydreamer uses a compact 1-cell power pack, and this spare battery matches that format with 3.7 V, 150 mAh and a Molex connector. As a replacement part for models 500505035 and 500505036, it is built for the named aircraft rather than as a generic battery across unrelated RC ranges. Its LiPo construction and 0.55 Wh rating place it in the lightweight class used by small radio-controlled flyers, where low mass and the correct connector matter as much as voltage. The red and black leads run to a white 2-pin plug, giving the battery the connection layout shown for the pack itself. The set includes 1 spare battery, so the focus stays on the essential replacement component. Age marking: 12. In regular RC flying sessions, a matching spare pack helps keep the compatible Easy Skydreamer ready for another run after the original battery has been used. It also serves as a like-for-like replacement when the existing pack needs to be exchanged, keeping the electrical specification aligned with the intended model setup.  Warning! Not suitable for children under 14 years.

Li-ion batteries

Li-Ion Battery Pack JST-4, RC battery, 7.4V

€17.99

This 7.4 V Li-Ion battery pack brings compact rechargeable power to compatible RC crawler models and adds a practical spare or replacement pack to the bench. With 1200 mAh capacity and 8.88 Wh, it supports electric vehicle setups that need a matched battery format for regular running sessions and planned swaps between charges. The pack uses a JST-4 connection and a 3-wire lead, as shown on the battery harness, for integration with compatible Carson RC Sport crawler systems. Its stated maximum charging current is 1.2 A, which matches the 1 C charging rate printed on the pack. The shrink-wrapped battery format keeps the cells grouped in a tidy rectangular pack that fits the compact layout typical of RC chassis installations. Charge before use is stated on the pack, and the connector should be unplugged for storage. In a hobby setup, this battery works well as the ready-charged pack kept beside the charger for the next run, or as the replacement power source that gets a crawler back on the trail after one pack is spent. The clearly marked voltage, capacity and charging data also make pack matching easier when organising compatible RC vehicle electronics.  Warning! Not suitable for children under 14 years.

RC servos

Servo CS-13, RC servo, 13 kg waterproof

€25.99

The Servo CS-13 brings regular-size dimensions, 13 kg torque and a waterproof design into one compact control component for RC models. Its 4.8-6 V operating range and JR connector suit common hobby electronics layouts, while the output shaft works with the included servo horns to transfer movement into steering, throttle or brake linkages. Inside the housing, metal gears handle the servo's drive path and support consistent motion under load. The set includes a cross horn, a single-arm horn, rubber grommets and a mounting screw, so different linkage positions and installation layouts can be matched to the model's setup. The 3-wire lead connects the servo to the control system, and the regular-size format suits many model applications where a standard servo footprint is required. The waterproof construction expands its use to builds that face wet ground or damp running conditions. In an RC car, the CS-13 can be installed for steering input or throttle and brake control, depending on the model layout. It also fits other hobby applications that use mechanical linkages and a JR plug connection, making it a practical choice for repairs, upgrades or fresh builds from age 14 years.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Tire Set Off-Road XL, wheels

€22.99

Loose dirt, gravel and broken ground call for a tread that can dig in, and this 1:8 Tire Set Off-Road XL brings that focus to RC buggy running with 2 complete wheels. Each wheel arrives glued and fitted with a foam insert, combining tyre, insert and rim in one ready-to-mount unit for 1:8 applications. The set is built around an off-road XL tread pattern with pronounced outer blocks and a knobby contact surface shaped for uneven terrain. Inside the tyre, the foam insert supports the carcass under load and helps the wheel keep its form as the buggy accelerates, brakes and changes direction on rough surfaces. The black multi-spoke rims use a 17 mm hex wheel hub standard, giving the set a clear fitment reference instead of a vague universal claim. The data names compatibility with CARSON 1:8 buggies in the Virus XL and Akuma lines. As replacement running gear, these complete wheels suit maintenance after tread wear, damage from hard terrain, or a setup change toward looser ground. Age marking: 14 Years. The pair format keeps front or rear axle changes straightforward when a buggy needs matching wheels for the next dirt session.

Chargers & charging cables

1:87 USB Four Point Charger Unit, charger

€39.99

The 1:87 USB Four Point Charger Unit brings a tidy charging hub to compact model fleets, with 4 charging outputs rated at 4.2 V / 50 mA each and a single 5 V / 1 A USB input. Set on a shelf, desk, or workbench, the station keeps several compatible miniature vehicles gathered in one clearly organised place instead of spreading chargers and cables across the hobby area. Its four-point layout is built for enthusiasts who rotate multiple 1:87 models between use and display. The charging station is included, along with the instruction manual, and the USB-powered format keeps the setup straightforward when a standard USB source is available. The 1:87 designation makes it a focused accessory for small-scale vehicle collections rather than a general charger for mixed formats. With several charging positions arranged on one base, the station supports a more structured routine for storing, charging, and preparing compatible models. In a collection cabinet, it creates a dedicated service point for miniature vehicles between runs. On a hobby bench, the compact unit helps keep compatible 1:87 models together and ready for the next session, whether the fleet includes a single favourite vehicle or several regularly used models.

RC chassis & attachments

Antenna Tube Black 4Pcs Model Accessory

€3.29

Antenna Tube Black 4Pcs is a model accessory set for RC vehicle setups that need a simple, clean guide for antenna routing. The pack contains 4 matching black antenna tubes, making it suitable as replacement stock for maintenance, rebuilds or fresh installations on compatible models. The slim tube format supports upright antenna placement and helps keep the wire path clearly defined on the vehicle. The black colour sits unobtrusively against many body shells and chassis layouts, which suits builds where a restrained, technical look matters as much as function. With 4 pieces in one pack, the set also covers repeated workshop use when several vehicles need the same small fitting. In day-to-day hobby use, antenna tubes are often the kind of part needed at short notice after repairs, body changes or general wear. This set fits naturally into spare-parts storage for model benches, pit boxes and maintenance kits where small RC fittings need to be ready when a compatible vehicle is being prepared.  Warning! Not suitable for children under 14 years.