Accessories
More track, more accessories, more action: Expand your Scalextric setup with track pieces, barriers, power units and more. Customize your racing experience.
Accessories
Scalextric Spark Plug Wireless Hand Controller
560008336€57.99
Scalextric Spark Plug brings wireless race control to a compatible Scalextric layout through a hand controller and a compact receiver module that plugs into the underside of the track. LED indicators on both the controller and the module show operating status at a glance, while the trigger-style control keeps acceleration input direct during side-by-side racing. The receiver connects at the marked track position, so the circuit surface stays uncluttered while the control link runs through the plug-in unit below. The controller body combines an angular top section with a curved handle that sits naturally in the hand, and the contrasting trigger makes the throttle control point easy to identify during fast laps. The set is sold as 1 wireless hand controller with the Spark Plug connection module. The age marking is 14 Years. On a 2-lane circuit, Spark Plug supports a cleaner driving area around the track because there is no controller cable crossing the table edge or the racing line. It suits home race sessions where quick reactions, repeated throttle changes and clear status indication matter from the first lap to the finish. Warning! Not suitable for children under 14 years.
Accessories
Digital Plug Decoder, Scalextric Slot Car Adapter
500707130€42.99
This digital plug decoder converts compatible Scalextric Easyfit Digital Plug Ready slot cars for use on Carrera 132 digital tracks, bringing digital control functions into an existing chassis with a compact 18 x 28 x 8 mm board. The 3 g unit installs in place of the DPR cover assembly and uses the central Scalextric plug connection for a direct retrofit. The decoder includes an integrated IR diode for track communication and supports programming through the control unit, including coding to a speed controller, base speed adjustment and braking level setup. Entered settings remain stored until reprogrammed, which keeps the chosen setup available for later sessions. Optional lighting connections on the board support front light, tail light and brake light functions through polarity-marked plugs. The included 2 light cables with soldered sockets provide the connection path when the vehicle layout supports this configuration. The operating voltage range is 12.0 to 14.8 volts DC. Installation follows the DPR format: remove the underside cover, disconnect the existing analog board connection, connect the digital board to the vehicle socket and secure the cover again with the screw. The decoder is only suitable for Scalextric Easyfit Digital Plug Ready slot cars and is intended for ages 14 years and up. Warning! Not suitable for children under 14 years.
Accessories
Scalextric Crash Barriers Set 1:32 Trackside
560008191€16.69
Scalextric Crash Barriers Set adds a race-day finish to a 1:32 slot car layout with 12 guardrail sections arranged as 6+6 pieces. Red and silver barriers with printed sponsor-style graphics create the look of a marked circuit edge, bringing more structure to the scene around bends, straights and infield areas. The set is built around trackside detailing rather than track mechanics, making it a simple way to change how a layout reads at a glance. Long and short sections can be placed in different combinations to suit tighter corners, wider curves or longer perimeter runs. Printed panels and logo-style markings give each section a circuit-inspired appearance, while the support feet let the barriers stand as freestanding scenery along the course. The 1:32 scale keeps the proportions aligned with matching slot racing layouts and helps the barriers sit naturally within a motorsport scene. Around a home circuit, the barriers can frame braking zones, define outer edges on turns or add visual depth beside spectator-facing sections of track. Used across a compact setup or a larger layout, the set helps create a more complete racing environment with clearer borders and stronger trackside character. Warning! Not suitable for children under 14 years.
Accessories
Scalextric ADAPTER CLASSIC-SPORT Track Converter
560008222€16.29
The Scalextric ADAPTER CLASSIC-SPORT Track Converter creates a direct link between CLASSIC and SPORT track sections, opening mixed-layout circuit building with a defined 175 mm straight format. Twin lanes and integrated metal rails carry the slot car path across the join, while the molded connector ends match the two track systems at each side. This set contains 2 converter sections, which can be placed as a single transition pair or used at separate points in a larger layout. The straight profile helps when planning lane flow through longer runs, pit approaches, or return sections where older CLASSIC parts meet SPORT track. The black molded surface keeps the visual look consistent within a circuit, and the inline design makes the adapter a functional part of the track rather than a separate attachment. Connector tabs and locking points are formed into each section to join mechanically with the surrounding pieces. In use, the converter supports layouts that combine existing CLASSIC sections with newer SPORT elements instead of keeping both systems apart. It suits circuit updates, replacement planning, and custom track builds where a clean physical and electrical transition between the 2 formats is needed. Age 14+.
Accessories
Scalextric Braid (6) Slot Car Replacement Set
560008075€4.19
Scalextric Braid (6) is a slot car spare set built around one clear task: replacing worn contact braids with 6 fresh pieces. The flat braided strips shown in the pack are intended for routine maintenance, helping restore the electrical pickup area that keeps a slot car running on the track. Each piece has a narrow woven form with a textile braid structure and cut ends prepared as replacement parts rather than decorative accessories. That makes the set useful for keeping maintenance supplies on hand between running sessions, especially when an existing braid has become tired through repeated track use. The contents are clearly defined as replacement braids x 6. Guide blades are not included in this pack, so the set stays focused on the specific wear part named in the title. On a workbench, in a pit box, or alongside a home circuit setup, this spare pack supports straightforward servicing when contact parts need changing. The 14 Years age marking is listed in the product data. For collectors and racers who maintain Scalextric cars, these replacement braids add a focused consumable part to the regular stock of running spares.
Accessories
Scalextric Digital Plug DPR Slot Car Converter
560008515soon available again
Scalextric Digital Plug Quer/Touring DPR brings digital control to compatible slot cars with a compact EasyFit module that connects through the car's existing DPR socket. Once fitted, the car can run on a Scalextric Digital layout, where up to 6 cars can race on one lane and drivers can switch lanes at the press of a button for overtaking and blocking moves. The conversion is built around a direct connection to the braid-to-motor wiring plug, so no complex rewiring is required. Many Scalextric cars produced from 2007 onwards already carry the standard socket needed for this setup. Fitting starts by removing the panel on the base of the car, then connecting the EasyFit Digital Plug and securing it to the chassis with the retaining screw. The process needs only a small screwdriver and takes less than 60 seconds. The compact board and holder sit neatly within the underside space provided by standard DPR Scalextric cars. This accessory suits race nights where analogue-compatible cars are being prepared for digital competition on the same layout system. It also works well as a workshop upgrade part when keeping a favourite Quer or Touring car ready for lane-change racing. Age recommendation: 14 years +
Accessories
Scalextric DIGITAL Round Guide Blade Set Braid
560008329soon available again
Scalextric DIGITAL Round Guide Blade Set (4) Braid brings the key contact parts of a digital slot car guide assembly together in one focused replacement pack. The set contains a round guide blade, 4 braid plates and 1 screw, giving a clear route to refresh a worn or incomplete guide setup on a compatible DIGITAL car. Each braid plate uses silver braid strips across the round black plate, a layout that supports electrical pickup where the guide assembly meets the track rails. The round guide format is shaped for the slot interface, helping the car stay connected through the guide area while digital running depends on clean contact. Because the set supplies 4 braid plates, it also works well as a maintenance reserve for repeated servicing rather than a single one-off swap. The included screw covers the fastening point named in the pack contents, so the guide assembly can be refitted with the matching fixing part listed in the data. On a home circuit or club layout, this set fits naturally into regular slot car upkeep between race sessions. It can be kept with workshop spares for quick replacement when braid contact parts show wear, or used to restore a car that needs fresh guide hardware before returning to the track. Age 14 Years