Brands

Carson

Carson 1:10 Mega Duster Bundle

Product bundle consisting of: 1:10 Mega Duster 3.0 2.4G 100% RTR / 7,4V/2600mAh LiION batt. FE-Line XHP/TAM   Article number: 500404292 Product: 1:10 Mega Duster 3.0 2.4G 100% RTR Powerful racer for off-road action: The Carson FE Mega Duster 3.0 doesn't stop at any terrain! The independent suspension, full suspension and extremely grippy high-grip off-road tires make the vehicle ideal for unpaved terrain. The Mega Duster is ready to run and equipped with 1x 2.4 GHz remote control system, 2x Li-Ion drive battery (7.4 V/1500 mAh), 1x USB charger, 4x LR06 / AA transmitter batteries and detailed instructions. Fully charged and at full capacity, a full 25 minutes of driving time is possible. The LED lighting, digitally proportional control and waterproof RC components complete the overall package and make the model appear not only high-quality but also easy to handle. Under ideal conditions, the vehicle can reach top speeds of up to 30 km/h. Included: Fully assembled model, 2.4 GHz RC system, LiIon powerpack 7,4 V / 1500 mAh, charger, transmitter batteries, manual.     Article number: 500608307 Product: 7,4V/2600mAh LiION batt. FE-Line XHP/TAM Experience Maximum Power with Our 2600 mAh Li-Ion Tuning Battery! With 7.4 volts of output and a Tamiya connector, it delivers extended run time and is the perfect choice for the FE line. Get the performance boost you’ve been looking for – now!  

RC buggys

1:16 Tenzu, RC car, 4WD 100% RTR

€79.99

The 1:16 Tenzu brings compact off-road running together with 4WD traction and fully proportional control in a 300 mm format built for fast, precise inputs. Front and rear LED lighting adds a clear visual signature while the chassis works across rough ground, loose sections and mixed surfaces. A 390 brushed motor pushes the model to up to 30 km/h, giving the lightweight 825 g layout the pace to feel lively without losing control. Ball bearings support efficient drivetrain operation, and the 2-channel 2.4 GHz radio system reaches up to 75 m for stable command during wider runs. The 110 mm height keeps the body low over the suspension, while the double wishbone layout helps the wheels track uneven terrain with controlled movement. The coarse-tread off-road tires are matched to outdoor running where grip changes from patch to patch. As a 100% RTR model, the set includes the 2.4 GHz remote control system, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA batteries. The age marking is 14 years and up. Open ground, gravel paths and compact dirt sections suit the Tenzu especially well, where its proportional control, 4WD layout and illuminated bodywork come into their own during evening laps.  Warning! Not suitable for children under 14 years.

Models & trailers

1:12 MB Unimog U300 THW, RC truck, 100% RTR

€199.99

The Unimog line became known for compact dimensions, portal-axle capability and utility work across rough terrain, and that character carries into this 1:12 MB Unimog U300 THW RC truck. In blue THW livery, the model combines a 450 mm body length with a powerful electric motor, front LED lighting and a 2.4 GHz control system for controlled driving on paths, gravel and other uneven ground. Its 220 mm width and 260 mm height give the truck a tall, purposeful stance that suits the U300 shape, while the 2052 g weight adds substance in motion. The remote control handles steering and throttle proportionally, so small stick inputs translate into finer changes than simple on or off control. A separate horn function can be triggered from the transmitter, and motor sound control adds another layer to the driving scene. The 7.4 V 850 mAh Li-Ion drive battery is included, and the RTR setup also includes the 2.4 GHz transmitter, a USB charger and transmitter batteries. That combination suits first runs in the hobby as well as relaxed utility-style driving sessions with a scale vehicle theme. On compacted dirt, paving or loose gravel, the THW truck can be guided through tighter turns, short climbs and stop-start route changes while the illuminated front end keeps the model visually defined.

RC truggies & RC monster trucks

1:10 Mega Duster 3.0, RC car, 2.4 GHz RTR

€124.99

The 1:10 Mega Duster 3.0 brings pick-up truck styling, LED lighting and a fully assembled RTR setup into a 430 mm off-road RC car built for rough ground. With independent suspension, coilover shocks and a fully suspended layout, the chassis is set up to absorb uneven surfaces while the multi-coloured printed body keeps the truck's desert-racer look clear in motion. Its 2.4 GHz radio system uses digital proportional control, so steering and throttle inputs can be fed in with fine adjustment rather than simple on-off commands. The included Li-Ion drive battery is rated at 7.4 V and 1500 mAh, and the USB charger is part of the set, along with 4 AA transmitter batteries. At 310 mm wide and 200 mm high, the truck carries a broad monster-truck footprint, while the stated weight of 1364 g supports a planted feel over gravel and dirt. Splash-proof electronics expand the running window when the surface is dusty or damp, and the stated driving time reaches up to 25 minutes. The Mega Duster 3.0 suits open ground, compacted trails and loose stone where the 115 mm all-terrain tires can work for grip and control. Age 14+ is stated for this model, and the fully assembled format gets the focus quickly onto driving lines, throttle control and off-road handling rather than workshop time.  Warning! Not suitable for children under 14 years.

RC speed boats

RC Yacht Hurikan, RC boat, 2.4 GHz RTR

€39.99

The Hurikan brings yacht styling and fast RC handling together in a compact 350 x 95 x 105 mm format built for lively water runs. Sand tones, white surfaces and dark window graphics give the hull a sharp, modern look, while the 2.4 GHz radio system keeps steering input responsive during laps across the lake. At 270 g, the model stays light in the hand for carrying to the shoreline, yet its twin-prop drive gives the boat the thrust needed for brisk acceleration on the water. Full driving functions cover forward, backward, left and right control, making tight turns and quick corrections easy to manage. The set includes a ready-to-run model, a 2.4 GHz remote control system, a USB charger, 2 x LR06 AA transmitter batteries and 2 spare propellers. The included 3.7 V 1200 mAh Li-Ion battery powers sessions of up to 40 minutes, and the drive engages only in water through the integrated shut-off circuit. That combination suits calm-lake outings, pond sessions and repeated practice runs where clean response matters as much as speed. Age 8+ marks the recommended age, and the complete RTR setup keeps the focus on steering lines, throttle control and fast passes across open water.

RC buggys

1:8 Drakuro BL 3S, RC car, 4WD RTR

€299.99

The 1:8 Drakuro BL 3S RTR brings brushless power, long-travel suspension and a wide 370 mm stance into one large-scale RC car built for fast off-road running. At 500 mm long, 330 mm high and 3402 g in weight, the chassis carries real presence on dirt tracks, gravel stretches and open ground, with a top speed of up to 65 km/h. A longitudinal aluminum reinforcement brace adds rigidity through the centre of the chassis, and reinforced steel drive shafts at the front and rear transfer power under load. The waterproof 30 kg steering servo uses metal gears for direct steering input, while splash-proof electronics and housing support running in changing conditions. Height-adjustable body mounts make it easier to set the shell position cleanly over the chassis, and LED lighting at the front, rear and roof keeps the model clearly defined when the light drops. The XT90 high-current connector system is designed for low-loss power transmission within the drive setup. The ready-to-run package includes a 2.4 GHz remote control and instructions, so the focus stays on driving rather than sourcing the core control gear. With 14 Years marked in the data, the Drakuro suits high-speed bashing sessions, repeated acceleration runs and broad off-road lines where suspension travel, steering force and chassis size all come into play.  Warning! Not suitable for children under 14 years.

RC yachts

Bella Luisa 2.4G, RC boat, 100% RTR

€69.99

Classic runabout styling meets radio-controlled action in the Bella Luisa 2.4G 100% RTR. The 455 mm motorboat combines a glossy wood-look finish, a clear curved windshield and chrome-look deck details with full steering control, creating a striking presence on ponds and small lakes. The hull measures 455 x 105 x 140 mm and weighs 648 g, giving the boat a slim, low profile on the water. Inside the set are a 2.4 GHz transmitter, a 7.4 V 1200 mAh Li-Ion drive battery, a USB charger and 4 AA transmitter batteries, so the model is fully assembled and ready for operation. The propeller drive reaches up to 10 km/h, while the water-activated motor start means the propeller engages only when the boat is on the surface. The detailed fairing and driver's cabin shape add to the leisure-boat look, and the cockpit area offers space for a play figure. On a calm garden pond, the responsive left-right and forward-reverse controls support neat manoeuvres along the bank or broad passes across open water. A driving time of up to 25 minutes leaves room for longer sessions before the battery returns to the USB charger.

RC speed boats

RC Fire Boat 2.4G, RC boat, 100% RTR

€119.99

The RC Fire Boat 2.4G 100% RTR brings firefighting action onto the water with a remotely operated water cannon, LED position lights and a sporty rescue-boat look. At 560 mm long, 147 mm wide and 215 mm high, the hull has a strong on-water presence, while the 2.4 GHz radio system keeps control stable across distances up to 100 m. The fully assembled boat is supplied as a ready-to-run set with a 7.2 V 1000 mAh NiMH drive battery, USB charger, 2.4 GHz remote control and 2 x AA transmitter batteries. Full driving functions cover forwards, backwards, left and right, so manoeuvres can be varied between straight sprints, tight turns and controlled repositioning for water-cannon play. A driving time of 45 minutes supports longer sessions before recharging, and the boat weight of 717 g keeps the format easy to handle between shore and water. Whether used on a pond, at the lakeside or on calm stretches of water, the fireboat combines radio-controlled driving with an extra action feature that changes how each run unfolds. Age 8 years+ marks the recommended age, and the included screwdriver supports the setup of the supplied components before the next launch.

RC aircraft

Stinger 2.0 2.4GHz 100% RTF, RC airplane

€49.99

The Stinger 2.0 2.4GHz 100% RTF brings a light 29 g airframe, intelligent gyro electronics and a ready-to-fly setup into one compact RC airplane built for controlled first flights and relaxed repeat sessions. With a length of 315 mm and a width of 385 mm, the model carries a broad wing layout that gives the aircraft a clear presence in the air while keeping the format easy to transport to open flying spaces. The Flexipor construction keeps weight low and supports the light handling that suits this class, while the 2.4 GHz control system allows clean command input without cable setup. A 3.7 V 300 mAh LiPo battery powers the airplane, and charging runs through the included USB charger. Spare rotor blades are included for continued use after routine wear, and the included 2x AA batteries complete the transmitter power supply. The gyro system works with the control inputs to calm the model in flight, which helps maintain a steadier line during climbs, gentle turns and landing approaches. Open ground, a sports field or another suitable flying area gives the 385 mm wingspan room to work through smooth passes and repeated take-offs. The ready-to-fly format keeps preparation focused on charging, switching on and heading into the next 20-minute flying session.

RC cars

1:10 Dustor, RC car, 2.4 GHz 100% RTR

€69.99

The 1:10 Dustor brings full-size RC presence to first runs and casual off-road sessions, with a 540 mm length, 300 mm width and 240 mm height that give the model a broad, planted stance on mixed surfaces. A brushed motor drives the 2WD rear-wheel-drive layout to speeds of up to 20 km/h, while the 2.4 GHz radio system reaches up to 75 m for clear control across open ground. Its fully assembled format keeps the focus on driving, and the included 7.4 V 500 mAh Li-Ion battery works with the USB charger for straightforward turnaround between sessions. At 985 g, the chassis stays light enough for responsive direction changes while still carrying the visual weight expected from a 1:10 off-road model. Front and rear impact protection support everyday running where gravel edges, kerbs and clipped markers are part of the route. The included transmitter is powered by 2 x LR06 AA batteries, so the full set is prepared for use without extra radio equipment. On asphalt, compacted paths or light terrain, the combination of suspension travel, rear-drive handling and off-road tires creates a controlled, approachable driving character. With up to 30 minutes of running time per charge, the Dustor suits park runs, open-yard driving and repeated practice laps where longer sessions matter.

RC cars

1:32 Deemon X, RC buggy, 100% RTR 2WD

€29.99

Compact scale and lively handling give the 1:32 Deemon X the feel of a true off-road RC buggy in a format built for quick runs at home or on small garden tracks. The 2WD layout, 2.4 GHz remote control system and selectable speed levels create a clear, responsive driving setup, while the elaborately printed body shell and switchable LED lighting keep the model visually sharp in motion. At 115 mm long, 86 mm wide and 53 mm high, the buggy fits neatly into tabletop courses, improvised obstacle lines and tighter turns where larger vehicles need more room. The 3.7 V 100 mAh LiPo drive battery supports up to 15 minutes of driving time, and recharging happens via the included USB charger. Included pylons and the jump ramp add concrete course elements for slalom sections, launch points and repeatable stunt practice rather than simple straight-line driving. The 69 g weight keeps the model nimble when changing direction, and the rubber tires give the chassis the grip needed for uneven surfaces. Short sessions on indoor floors, hallway tracks or paved garden paths suit the Deemon X especially well, whether the focus is clean cornering, quick acceleration bursts or ramp jumps. With 2 speed settings and a complete RTR package, the buggy moves easily between first RC laps and fast, compact course driving

RC helicopters

Eagle 280 Crash Stop, RC helicopter, 2.4G RTF

€44.99

The Eagle 280 Crash Stop brings compact RC helicopter flying together with a front crash-stop sensor that reacts to obstacles by stopping and backing the model away. At 200 mm long, 280 mm wide and 125 mm high, this 56 g coaxial helicopter suits controlled flights in tighter spaces as well as calm outdoor use. The 2.4 GHz control system gives the model its dedicated radio link, while the emergency stop button on the transmitter adds a direct way to cut the action when needed. A 3.7 V 250 mAh LiPo flight battery powers flights of up to 7 minutes, and the model reaches speeds of up to 25 km/h. The aluminium chassis gives the structure a firm core, and the coaxial rotor arrangement supports balanced lift for measured handling. Spare rotor blades are included, so the set is equipped for continued running after routine contact or wear. Indoor flights near walls, hallways or furniture benefit from the forward obstacle response, while open areas allow short hovering runs, lift-offs and landings with the same compact airframe. The ready-to-fly package includes the helicopter, remote control system, USB charger and transmitter batteries, so the set is prepared for flight after the first charging process.

RC truggies & RC monster trucks

1:12 NemeSys, RC car, 2.4 GHz 100% RTR

€129.99

The 1:12 NemeSys brings compact dimensions, 4WD traction and a lively off-road setup into one ready-to-run RC car. At 334 mm long, 233 mm wide and 140 mm high, the chassis combines a manageable footprint with the stance needed for rough ground, while the 2.4 GHz radio control keeps handling interference-free during each run. A 7.4 V Li-Ion drive battery with 1300 mAh supplies the Type 390 motor, and the aluminium heat sink supports the drive system when the pace rises. The model reaches up to 35 km/h and weighs 1020 g, giving the suspension and tyre setup a planted feel over changing surfaces. Adjustable aluminium shock absorbers let the running gear respond to ruts, gravel and uneven tracks, and the treaded tyres add bite where smooth rubber would lose grip. Integrated LED lighting on the bumper and roof adds a clear visual reference when the light drops, and the wheelie function brings an extra burst of character under strong acceleration. Splash-proof components support running sessions on dusty paths and damp ground, extending the range of places where the NemeSys can be driven. Driving time reaches 30 minutes. The set includes the fully assembled model, a 2.4 GHz remote control, a drive battery, a USB charger and 3 transmitter batteries, so the first outing can start with the supplied running gear and radio equipment.  Warning! Not suitable for children under 14 years.

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage, RC car

€17.99

The Aston Martin V12 Vantage brings British sports car character into a 1:60 Nano Racer format, combining licensed body styling with compact RC handling. At 79 mm long, 33 mm wide and 22 mm high, the black coupe keeps a low, planted look that suits short sprints across tables, smooth floors and small driving spaces. Its 2.4 GHz radio system gives the model a dependable link to the controller across 15 m, and the layout also allows up to 50 vehicles to run at the same time. That makes the small scale especially lively in group sessions, where several cars can share the same area without constant frequency conflicts. The ready-to-run setup keeps the focus on driving, while the included 1.2 V 80 mAh NiMH drive battery matches the compact chassis and the 25 g weight for quick, light movement. Charging runs directly through the remote control unit, so the car and controller work as one neat driving system. With a maximum driving time of 10 minutes, the Nano Racer suits short races, repeat laps and quick head-to-head runs. Age 4+ is stated in the product data. The included screwdriver supports battery access as part of the set contents, and the compact format makes the model easy to store between sessions.

RC models in 1:87 scale

1:87 MB 1620 Tarp Truck, RC truck, 100% RTR

€139.99

The 1:87 MB 1620 Tarp Truck with trailer brings moving road traffic into H0 railway scenes with compact dimensions of 187 x 28 x 38 mm and fully assembled 100% RTR equipment. Official Mercedes-Benz Trucks licensing, fine printwork and the blue finish give this RC truck a recognisable presence beside stations, freight depots and urban track sections. Its 2.4 GHz radio system supports interference-free control and allows several models to run at the same time, which suits busy diorama setups with more than one active vehicle. The very small turning radius helps the truck work through narrow streets, loading areas and switching zones where larger RC formats would look out of scale. The trailer extends the road-train silhouette and the removable tarp changes the look of the load area for different scene concepts. Included in the set are the ready-to-drive model, 2.4 GHz remote control system, Li-Ion drive battery 3.7 V / 75 mAh, 4 transmitter batteries LR03 / AAA, and instructions. On a layout, the truck can roll alongside trains, serve as a delivery vehicle near a goods shed or move through a city section with controlled speed changes and steering inputs. Collectors can also place it as a static display piece, with the integrated driver figure and licensed cab details carrying the scale effect even when the model is parked.

RC helicopters

Easy Tyrann 200 Boost IR, RC helicopter, 100% RTF

€29.99

The Easy Tyrann 200 Boost IR brings compact indoor helicopter flying into a 100% RTF format with a 240 mm body, 200 mm rotor diameter and a 3-channel infrared control system. Its gyro-supported flight stabiliser helps keep the model composed in the air, while the switchable boost function adds an extra burst of power when the pace needs to change. A 3.7 V LiPo flight battery with 250 mAh capacity powers flight times of up to 9 minutes, and charging runs through the included USB charger. The transmitter also controls the color changing LED, so the light effect can be switched during flight rather than staying fixed. With a top speed of 15 km/h and a flight weight of 31 g, the helicopter stays light enough for controlled indoor use while still delivering lively movement. The ready-to-fly set includes the model, IR remote control system, LiPo flight battery, USB charger, 3x LR06/AAA transmitter batteries and spare rotor blades. Short hovering runs in a living room, careful turns along a hallway or repeated take-offs and landings on a smooth floor all suit the compact format. Age 8 Years+

RC tractors

1:16 Deutz-Fahr 8280 TTV, RC tractor, trailer

€99.99

The DEUTZ-FAHR 8280 TTV brings the look of a modern farm tractor into 1:16 scale with a matching trailer, 2.4 GHz radio control and working sound functions. Engine sound, horn and LED front lighting create a more lifelike driving scene, whether the tractor is rolling across loose soil, garden paths or a carefully arranged display setup. At 750 mm long, 180 mm wide and 234 mm high, the model has a substantial footprint that suits towing and transport play. The rigid axle supports off-road running, while the steering is tuned for precise control and a small turning radius, helping the tractor change direction cleanly and guide the trailer through tighter spaces. The officially licensed DEUTZ-FAHR styling carries the 8280 TTV identity into the bodywork, giving the model a recognisable agricultural character. The accessible battery compartment under the hood allows quick battery changes between runs. Included are the ready-to-run tractor with trailer, a 2.4 GHz remote control system, a 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR03 AAA transmitter batteries. With a weight of 1731 g and a driving time of 90 minutes, the set is equipped for extended driving sessions focused on towing, positioning and farm-style transport action.

RC truggies & RC monster trucks

1:10 Torque Beast, RC car, 2.4 GHz RTR

€129.99

The 1:10 Torque Beast brings classic monster truck presence to RC driving with a 430 mm length, 310 mm width and 200 mm height that give the chassis a broad, purposeful footprint on rough ground. A solid bumper with integrated LED lighting adds a bright front-end detail, while water-resistant RC components and splash-proof electronics support running when the surface turns damp or dusty. At 1364 g, the model combines its size with a manageable overall weight that suits quick direction changes and repeated runs. The 7.4 V 1500 mAh Li-Ion drive battery is included, and the stated running time reaches 25 minutes before the pack heads back to the USB charger. The fully assembled RTR format keeps the focus on driving rather than setup, and the 2.4 GHz system supports stable control without the frequency crystals older RC systems required. Minimum age: 14 years. On gravel paths, compact dirt sections or uneven yard surfaces, the Torque Beast has the ground clearance and tire format to keep the run lively without losing control. Evening sessions gain extra character from the front LED lighting, and the included battery set means the truck is equipped for the first outing straight away.

Mini RC cars

1:60 Nano Racer Aston Martin V12 Vantage RC car

€17.99

The Aston Martin V12 Vantage brings a well-known British sports car shape into a compact 1:60 Nano Racer format with radio control and a red body that stands out clearly on small driving layouts. Its officially licensed appearance follows the full-size model closely, while the 79 mm length, 33 mm width and 22 mm height keep the car suited to short straights, table-edge turns and quick direction changes in limited space. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The controller works on 2.4 GHz and reaches up to 15 m, giving the car enough room for indoor laps and compact obstacle courses. The same control system allows up to 50 vehicles to run simultaneously, which opens the door to group sessions without frequency clashes. With a weight of 25 g, the small chassis stays easy to handle between runs, and the battery delivers up to 10 minutes of driving time per charge. On a living room floor, a desk track or a small race setup, the Nano Racer format turns narrow spaces into usable circuits. Short driving sessions, quick charging through the controller and the compact footprint make this RC car a neat choice for spontaneous races, collecting and casual practice runs.

Mini RC cars

1:60 Nano Racer Fo.Must.Shelby GT500, RC car

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle-car presence, and this 1:60 Nano Racer translates that character into a compact RC format. With its licensed Ford design, red bodywork and stripe detailing, the small car brings a recognisable road-car silhouette to quick indoor driving sessions. The 2.4 GHz control system sends steering and throttle inputs over a range of 15 m, and it allows up to 50 vehicles to run simultaneously on the same frequency environment. Charging takes place through the remote control unit, which includes the charging connection for the 1.2 V 80 mAh NiMH drive battery. A full charge delivers up to 10 minutes of driving time. The ready-to-run format means the model, remote control with charging connection, NiMH drive battery, screwdriver and instructions are included. With dimensions of 79 x 33 x 22 mm and a weight of 25 g, the Nano Racer fits naturally into compact race setups where short straights, quick direction changes and close duels matter more than sheer size. The small scale also makes it easy to line up several cars for simultaneous runs, turning a table, hallway or smooth floor into a miniature racing scene with very little space required.

Mini RC cars

1:60 Nano Racer Fo.Must.ShelbyGT500, RC car

€17.99

The Ford Mustang Shelby GT500 has long stood for big-engine muscle car presence, and this 1:60 Nano Racer translates that character into a compact RC format. At 79 mm long, 33 mm wide and 22 mm high, the miniature car stays small enough for quick driving sessions on tables, smooth floors or improvised indoor courses while still carrying the licensed Ford look. The ready-to-run set includes the model, a remote control with charging connection, a 1.2 V 80 mAh NiMH drive battery, a screwdriver and instructions. The 2.4 GHz radio system gives the car responsive control and allows up to 50 vehicles to run simultaneously, which suits group races without frequency clashes. A 15 m control range leaves room for short sprints, turns and head-to-head runs, while the 25 g weight keeps the handling light and agile. The remote control also serves as the charging point, so the battery can be charged directly through the controller. With up to 10 minutes driving time, the Nano Racer fits quick race breaks, compact home circuits and repeated short sessions where several cars share the same space. The small footprint and simple control layout also make it easy to set up spontaneous races whenever a smooth surface is available.

RC models in 1:87 scale

1:87 Mercedes-Benz O 302 DB, RC bus, 2.4GHz

€129.99

The Mercedes-Benz O 302 shaped coach travel across Europe for years, and this 1:87 RC bus brings that familiar silhouette into moving H0 scenes with licensed bodywork, raspberry red paintwork and front and rear LED lighting. At 112 mm long, 36 mm wide and 51 g in weight, the model sits naturally among buildings, platforms and road sections without overpowering the layout. Its 2WD rear-wheel drive works with a 2.4 GHz 3-channel radio system for controlled movement at up to 50 m, while the compact format helps the bus thread through tighter streets and station areas. The integrated 3.7 V Li-Ion battery with 75 mAh is built into the model, keeping the setup clean and the proportions true to scale. As a 100% RTR version, the set includes the remote control, the lithium drive battery, 4x AAA batteries, instructions and a storage case. The licensed Mercedes-Benz O 302 DB format gives the bus a recognisable road-going character that suits realistic transport scenes. On a model railway layout, the bus can roll between station forecourts, depot roads and town routes, adding controlled movement where static vehicles would otherwise remain fixed. The compact H0 scale format also suits shelf presentation between driving sessions, with the lighting and paintwork carrying the look of a classic DB bus into close-up display settings.

RC speed boats

Sea Ray 2.4 GHz, RC boat, 100% RTR

€54.99

The Sea Ray 2.4 GHz brings twin 380 brushed motors, a streamlined hull and RTR convenience together in a compact RC boat built for fast action on the water. At 395 mm long, 190 mm wide and 100 mm high, it cuts a neat profile across ponds and calm lakes, with LED lighting adding a clear visual accent as the hull moves through changing light. The fully assembled format keeps the focus on driving rather than setup, and the included 7.4 V 600 mAh Li-Ion battery supports up to 20 minutes of running time per charge. A charging time of 3 hours keeps the routine straightforward between sessions. The 2.4 GHz radio system is designed for 1 player control, while the water-protected receiver and battery box help keep key electronics covered from spray. A built-in shut-off means the motors only run in water, matching the boat's intended use with a clear functional safeguard. Its lightweight 349 g build makes carrying the model from bag to bank easy, and the compact shape sits comfortably in hand at launch and recovery. With 2 AA transmitter batteries included, the set is ready for immediate use in suitable water conditions, whether the plan is short speed runs, repeated passes along the shoreline or relaxed practice with steering and throttle control.

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 100% RTR 4WD

€199.99

The 1:10 XS Tekuro brings a fast off-road setup into a ready-to-run format, combining permanent 4WD, a high-torque 550 brushed motor and up to 40 km/h for lively runs across dirt, gravel and rough ground. At 410 mm long, 300 mm wide and 175 mm high, the chassis carries a broad monster-truck stance that suits uneven terrain and quick direction changes. Completely mounted on ball bearings, the drivetrain is built to reduce drag through the transmission, while metal differentials at the front and rear use steel bevel gears for direct power transfer under load. The XT60 high-voltage battery plug-in system supports a secure connection for the included 7.4 V 2600 mAh Li-Ion battery pack, and the quick-change battery holder keeps swaps straightforward between sessions. Weight comes in at 1741 g, giving the chassis enough mass to stay settled as the suspension works through bumps. The rear bumper integrates a wheelie bar that supports controlled lift when the motor loads up hard from a standing start. The scope of delivery includes the 100% RTR model, 2.4 GHz remote control system, 2600 mAh 7.4 V drive battery, 1 A USB charger, 4 LR06 AA transmitter batteries and a manual. Driving time is about 15 minutes, making the XS Tekuro a strong fit for park runs, compact off-road tracks and loose-surface sessions where quick setup and solid traction matter.  Warning! Not suitable for children under 14 years.

RC diggers

1:16 Volvo EC 160E, RC excavator, 100% RTR

€199.99

The Volvo EC 160E brings excavator handling into 1:16 scale with a ready-to-run RC setup, a true-to-original driver's cab and a working crawler layout built around 2 separately driven chains. With an operating weight of 2354 g and dimensions of 252 x 168 x 180 mm, the model carries a substantial presence while remaining manageable for controlled indoor driving and digging sessions. Its function package focuses on coordinated arm work rather than simple forward travel. The lifting arm and stick are made of plastic, and the spindle drive system moves the lifting arm, stick and bucket through deliberate, mechanical action that suits loading, lifting and placement tasks. The 2.4 GHz radio system supports single-user control, and the maximum operating time of up to 190 minutes allows longer work cycles before recharging. The included sheet metal shovel, scrap grab and excavator chisel shift the machine from earthmoving to gripping and breaking scenarios without changing the core vehicle. On a floor-based building site layout, the excavator can turn the uppercarriage through 360° to pick up, swing and place material within a compact work zone. The RTR package includes the model, remote control system, 7.4 V 1200 mAh Li-Ion drive battery, 3 LR06/AA transmitter batteries and instructions.  Warning! Not suitable for children under 14 years.

RC cars

1:24 Lamborghini Sian, RC car, 2.4GHz RTR

€24.99

The Lamborghini Sian brings super sports car styling into a compact 1:24 RC format, pairing a low, sharply shaped body with radio-controlled handling and a full ready-to-run setup. With a length of 195 mm, a width of 80 mm and a height of 49 mm, the model carries its proportions in a size that suits quick laps across smooth indoor surfaces. The 2.4 GHz remote control system supports stable command input during solo driving, while the 3.7 V Li-Ion drive battery with 500 mAh powers up to 60 minutes of ride time. At 172 g, the car stays light in hand and easy to place on the floor between runs. The included USB charger keeps the charging routine simple, and the set also contains 2 LR03 AAA transmitter batteries. A rear axle differential adds a mechanical detail that supports smoother cornering behaviour, while steering fine adjustment helps tune the driving line to the available space. LED lights at the front and rear keep the bodywork visible when the room gets darker and add extra presence during evening driving sessions. On a hallway course, around furniture legs or across a cleared living-room track, the compact dimensions, quick responses and detailed Lamborghini look create a focused RC session with a clear sports car character.

RC cars

1:24 Lamborghini Veneno, RC car, 100% RTR

€24.99

The Lamborghini Veneno brought extreme supercar styling to the road, and this 1:24 RC version carries that same low, angular character into compact driving sessions. As a fully assembled ready-to-run RC car, it combines a 2.4 GHz control system with a 195 mm body, 80 mm width and 49 mm height for quick laps across smooth indoor surfaces. The included Li-Ion drive battery delivers up to 60 minutes of driving time at full capacity, and the USB charger keeps the setup straightforward between runs. At 172 g, the model stays light in hand and responsive in motion, while the pistol-grip transmitter uses a steering wheel control and trigger throttle for familiar RC handling. Front and rear LED lights sharpen the car's presence when the room gets darker, and the underside trim dial marked for left and right steering correction helps align the tracking when the car pulls off line. The non-slip rubber tires support controlled acceleration and cleaner corner entry on short home circuits. Age 6 years and up is stated for the model. On a hallway course, around furniture or across a start-finish line marked out at home, the compact scale and agile response keep each run focused on timing, steering input and repeatable lines rather than sheer size.

Mini RC cars

1:32 VW Beetle Rally, RC car, 2.4 GHz RTR

The Volkswagen Beetle became one of the most recognisable car shapes ever built, and this 1:32 VW Beetle Rally translates that silhouette into a compact RC car with a rally-inspired stance. At 135 mm long, 85 mm wide and 85 mm high, the ready-to-run model combines agile handling with a size that suits quick driving sessions on smaller courses, tabletops or smooth ground. The 2.4 GHz radio system gives the car its control link, while the 273 g weight keeps the model light enough for nimble direction changes. The included remote control, drive battery and USB charger mean the main running components are already in the set, so the focus stays on driving rather than extra setup. A 3.7 V Li-Ion drive battery powers the car for up to 60 minutes of runtime, supporting longer sessions before the next charge. The Volkswagen licence adds the named vehicle identity from the original subject to the rally-themed body. Red LED underbody lighting stands out especially well in dimmer indoor spaces, where the glow adds movement and presence as the Beetle changes direction. Treaded tires help the car hold its line on mixed surfaces, making short sprints, looping turns and obstacle runs feel active and controlled. Age 6+

RC buggys

1:8 Akuma Buggy, RC car, 4WD RTR pink

€399.99

The 1:8 Akuma Buggy brings 4WD traction, brushless power and a bold pink body shell into a ready-to-run off-road setup built for fast runs on dirt, gravel and uneven ground. With a length of 505 mm, a width of 365 mm, a height of 220 mm and a weight of 3909 g, the chassis carries the broad stance and substantial footprint that suit buggy driving beyond smooth surfaces. A 100A drag-style ESC for 4S operation works with the 2050 Kv 3-pole brushless motor, while the cooling fan and aluminum motor heatsink support the electronics during hard acceleration. Steering input is handled by a 20 kg waterproof servo with metal gears, and the adjustable aluminum steering plate adds another tuning point at the front end. The XT90 high-current connector system and quick-change battery mount with Velcro strap keep battery swaps straightforward between runs. Splash-proof electronics and a 3-position adjustable rear spoiler round out a layout aimed at outdoor use. The included Expert Charger Twin LiPo USB-C charges two 7.4 V LiPo batteries simultaneously at 2A each, matching the supplied 2 x 7.4 V 3800 mAh drive packs. A 10 minute ride time suits short, fast sessions on compact tracks, open gravel areas or backyard jumps, with the color-printed body keeping the Akuma look clear at speed. Age 14+  Warning! Not suitable for children under 14 years.

RC buggys

1:8 Drakuro BL 3S 4WD RTR, RC car

€299.99

The 1:8 Drakuro BL 3S 4WD RTR brings brushless power, long-travel suspension, and a wide off-road stance into a ready-to-run RC car built for fast runs across mixed terrain. With a length of 500 mm, width of 370 mm, height of 330 mm, and weight of 3402 g, the chassis carries the planted footprint needed for high-speed driving and rough-surface control. A waterproof 30 kg steering servo with metal gears gives the front axle the force needed for direct steering inputs, while splash-proof electronics and housing support running where dust, spray, and loose dirt are part of the session. Steel differentials at the front and rear distribute drive through the drivetrain, and height-adjustable body mounts allow the shell position to be matched to the setup. The XT90 high-current connector system is designed for low-loss power transmission, supporting the demands of the brushless drive package under load. LED lighting at the front, rear, and roof keeps the body easy to track as conditions darken, and the rear bumper integrates a wheelie bar for hard launches under strong acceleration. The ready-to-run set includes a 2.4 GHz remote control and instructions. 14 Years marks the recommended age.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B 200/8, RC car, 100% RTR trailer

€114.99

The Mercedes-Benz /8 series shaped everyday road traffic in the late 1960s and 1970s, and this 1:87 M-B 200/8 captures that classic saloon presence in a compact RC format. The green body and matching trailer combine a recognisable road-car silhouette with radio-controlled movement, creating a small-scale setup that carries both collector appeal and active driving use. Its 1:87 scale makes the model easy to place on a desk, shelf, or layout, while the trailer adds a second element that changes the overall scene and gives the combination a more complete towing look. The 100% RTR specification means the driving package is prepared for immediate use, and 5 included batteries cover the initial power requirement stated in the data. With a minimum age marking of 14 years, the model sits in a hobby-focused range rather than a preschool toy segment. The compact format also suits short driving sessions where a larger RC vehicle would need more floor space. Whether used for careful indoor manoeuvres, as a small addition to a model collection, or as a road-car counterpart within a miniature vehicle lineup, the M-B 200/8 with trailer brings motion into a classic passenger-car theme. The combination of saloon and trailer gives the setup a distinct identity both at rest and in operation.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B Unimog U406, RC fire engine, RTR

€109.99

The Mercedes-Benz Unimog U406 has long been known for compact utility and all-terrain presence, and this 1:87 RC fire engine translates that character into a format built for close-quarters driving. Fine printing, high-quality paintwork and front and rear LED lighting give the body a convincing emergency-service appearance, while the very small turning circle suits narrow routes between scenery, tools or display pieces. The chassis uses 2WD rear-wheel drive and a brushed motor for controlled running, with fully proportional steering and acceleration allowing measured inputs instead of simple on-off commands. That control layout makes a visible difference on a desk, in a diorama or anywhere space is limited, because the model can be guided through tighter lines with cleaner corrections. The 2.4 GHz system supports stable operation, and the permanently installed 3.7 V 75 mAh Li-ion drive battery keeps the compact body free from bulky battery changes. Charging takes place via the transmitter and takes around 30 minutes. As a 100% RTR version, the set arrives with the remote control, the drive battery and the batteries required for the transmitter. Up to 60 minutes of driving time supports longer indoor sessions, whether the model is weaving through a small layout, tracing service routes across a tabletop or adding movement to a scale scene.

Military figures & accessories

Italeri Walls and Ruins Model Kit 1:72 Scale

€9.49

Italeri Walls and Ruins brings damaged architecture into a 1:72 model scene with ruined wall sections, rubble details and accessory parts that shape a convincing World War II setting. The assembly kit uses polystyrene components with moulded masonry surfaces, broken edges and openings that give the finished structure a worn, battle-marked look. Large wall pieces, lower broken panels and separate debris sections allow different layouts across a base, so the same set can frame a street corner, a shattered defensive line or the remains of a larger building. Sandbag elements introduce another layer of scene building, adding cover positions and visual contrast beside the stonework. Exposed brick textures and damaged contours create depth that stands out once painted and weathered. The 1:72 scale fits naturally with military miniatures, vehicles and historical displays built to the same proportion. On the workbench, the 600-minute assembly time supports a slower build with room for test fitting, painting stages and final placement of rubble and barricade details. In a finished diorama, the ruined sections can anchor a battlefield vignette, surround an armoured vehicle, or define the backdrop for infantry figures in a compact World War II display.

RC cars

Magic Machine 2.0, RC car, 2.4 GHz RTR

€49.99

The Magic Machine 2.0 brings a striking twist to RC driving with a body that changes function at the touch of a button. In one moment it runs as a flat racer, and in the next it shifts into an off-road configuration with more ground clearance, creating a fast change of character on asphalt, ramps and rougher sections. Its layout combines separately steered front and rear units with all-wheel drive, so both axles work together as the vehicle changes direction. That unusual steering concept gives the model its own driving feel and supports quick reactions when obstacles appear in the path. The body design also allows the machine to flip backward over obstacles, continue driving on its back and right itself again to keep moving. LED lighting adds another visible detail during use, while the contrasting top and bottom styling makes each rollover part of the visual effect rather than a stop in the action. With a length of 340 mm, a width of 215 mm and a height of 123 mm, the model has a compact footprint matched by a weight of 570 g. The included Li-Ion drive battery delivers up to 25 minutes of driving time and is paired with a USB charger. A 2.4 GHz remote control in a game controller style is included, along with 2 AA transmitter batteries, so the ready-to-run set is equipped for immediate use after charging.

RC yachts

Nano Racer Yacht 2.4G

€19.99

RC action on the water! With the Nano Racer Yacht, luxury RC fun on the water is realized. The ready-to-run yacht model delivers full driving fun right after unpacking and brief charging. It is controlled with a 2.4 GHz radio remote control and offers a range of up to 40 meters. Thanks to the safety shutdown, the propellers only work when the model is in contact with water. All RC components are water-resistant, making the yacht ideal for exciting action on the water. The set includes a LiPo battery and clear instructions for quick start-up. Compact, fast, and easy to control, the Nano Racer Yacht is a fun watercraft for hobby and play.

RC speed boats

XS Deep Sea Dragon, RC submarine, 100%RTR

€39.99

Compact RC submarines bring a different kind of model action, and the XS Deep Sea Dragon shifts that action below the surface. This 100%RTR RC submarine combines a compact orange hull, 3-channel 40 MHz control and blue LED illumination for visible manoeuvres in baths, pools and aquaria. The set includes the mini submarine with RC system, a 3.7 V 90 mAh Li-Ion drive battery, a USB charger, 2 transmitter batteries and instructions. Forward, backward, left and right steering are joined by dive and surface functions, so movement is not limited to a flat path across the water. The blue LEDs stay visible during operation and help keep the model in view while it changes depth. With up to 6 minutes of runtime, each charge suits short underwater runs with a clear start and finish. The USB charging cable can be stowed in the transmitter, so the charging lead stays with the control set between sessions. In use, the compact format suits smaller water spaces where tight turns and depth changes stay easy to follow. Age 8+ marks the recommended age. The submarine is intended for fresh water use in swimming pools, baths and aquaria; do not use in salt water.

RC truggies & RC monster trucks

1:10 Bokusa BL 2S 4WD RTR, RC car, yellow

€219.99

The 1:10 Bokusa BL 2S 4WD RTR brings brushless power and monster truck stance into a ready-to-run RC car built for fast off-road sessions. Its 455 x 312 x 180 mm format and 2165 g weight give the chassis a planted footprint, while the yellow body adds a bold trackside look. A 30 kg waterproof steering servo with metal gears handles steering input with firm control, and the fully ball bearing mounted transmission supports efficient running across the drivetrain. Metal differentials at the front and rear use steel bevel gears, adding a solid mechanical base for repeated acceleration and braking. The 2.4 GHz remote control system is included, and the radio system is water-protected for running in changing ground conditions. An XT90 high-voltage battery connector system and a quick-change battery mount keep battery swaps straightforward between sessions. With a stated runtime of up to 15 minutes, the model suits short, fast runs on dirt, gravel and uneven surfaces where suspension travel and tyre grip can be used fully. Age 14 Years. A battery is required separately.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 Bokusa BL 2S, RC car, 4WD RTR

€219.99

The 1:10 Bokusa BL 2S brings brushless power, 4WD traction and RTR convenience into a 455 mm off-road machine built for fast, dirt-focused running. With a width of 312 mm, a height of 180 mm and a weight of 2165 g, the chassis carries a broad, planted stance that suits rough ground and quick direction changes. Metal differentials at the front and rear use steel bevel gears to distribute drive across the axle line, while the fully ball bearing mounted transmission supports efficient running through the drivetrain. A 30 kg waterproof steering servo with metal gears gives the front end firm steering authority in wet or dusty conditions, and the water-protected 2.4 GHz remote control system keeps control input stable during outdoor sessions. The XT90 high-voltage battery connector system is paired with a quick-change battery mount, so battery swaps stay straightforward between runs. Age recommendation: 14 years and over. As an RTR model, the Bokusa BL 2S is set up for immediate driving once the required power source is added. Gravel tracks, compacted dirt and uneven open ground suit the suspension layout and tyre format especially well, while repeated acceleration runs benefit from the wheelie bar at the rear. Batteries are required separately.  Warning! Not suitable for children under 14 years.

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

€74.99

The 1:10 Cage Fighter brings desert buggy styling, radio-controlled handling and ready-to-run convenience into one fast-moving off-road setup. As a fully assembled RC buggy with 2.4 GHz control, it heads straight into dirt tracks, packed gravel and open ground with a low barrier to entry and a focused motorsport feel. Its full suspension supports precise steering response when the surface turns uneven, while the grippy off-road tyres help the buggy hold traction across changing terrain. Solid bumpers at the front and rear add protection in the zones that take the hardest knocks during close running. At 436 mm long, 234 mm wide and 147 mm high, the chassis has a planted footprint that suits outdoor driving, and the 806 g weight keeps the model agile in direction changes. The included Li-Ion drive battery runs at 7.4 V with 500 mAh capacity, and the set also includes a USB charger, a 2.4 GHz remote control and 2 x LR06/AA transmitter batteries. Top speeds of up to 18 km/h add a brisk pace without pushing the model beyond approachable control. Whether the route runs over compacted soil, short grass or rougher backyard ground, the Cage Fighter is built for active RC sessions rather than shelf display. Age 8+ marks the recommended age, and the 100% RTR format keeps the focus on charging the battery, taking the controller in hand and getting the buggy moving.

RC cars

1:10 Cage Fighter, RC buggy, 2.4GHz RTR

€74.99

The 1:10 Cage Fighter brings fast off-road RC action into a ready-to-run format with a fully assembled chassis, 2.4 GHz radio control and a 7.4 V 500 mAh Li-Ion drive battery. At 436 mm long, 234 mm wide and 147 mm high, the buggy cuts a planted stance as it charges over dirt, gravel and uneven ground. Its full suspension helps the wheels stay in contact with the surface, so steering inputs translate into cleaner direction changes instead of skittish bouncing. The 806 g vehicle weight supports an agile feel without losing presence on the track. Front and rear bumpers frame the chassis with added protection in the zones that meet obstacles first, which suits repeated running in tighter spaces and rougher outdoor sections. The included USB charger keeps the battery routine straightforward, and the supplied 2 x LR06 AA transmitter batteries complete the set. With a driving time of 25 minutes and speeds of up to 19 km/h, the Cage Fighter suits short backyard sessions, improvised dirt courses and casual head-to-head runs with other 2.4 GHz models. Age 8+ is stated for this RC buggy, making it a strong entry point into radio-controlled driving while still offering enough pace and control to stay engaging beyond the first outings.

RC truggies & RC monster trucks

1:10 Rodstar, RC car, 2.4 GHz 100% RTR

€129.99

The 1:10 Rodstar brings hot rod pick-up styling into an off-road RC format, pairing a multi-coloured printed body with a fully assembled ready-to-run layout. At 430 mm long, 310 mm wide and 200 mm high, the truck carries a broad, planted stance that suits gravel paths, compacted dirt and mixed ground. Its 1364 g weight works with the suspended chassis to give the model a settled feel as the wheels move over ruts and small impacts. A heavy-duty front bumper adds a solid visual edge and houses LED lighting that keeps the front end clearly defined in lower light. Splash-proof electronics support driving where damp patches, loose grit and changing ground conditions are part of the route. The included 2.4 GHz RC system gives radio control straight from the set, while the 7.4 V 1500 mAh Li-Ion power pack supplies up to 25 minutes running time per charge. The Rodstar suits quick sessions on open ground, repeated passes over rough surfaces and scale-style cruising with a custom hot rod look. USB charging keeps the drive battery easy to top up between runs, and the included transmitter batteries complete the package for immediate use.

RC cars

1:12 RaceRival Combo, RC car, 2.4G RTR

€59.99

The 1:12 RaceRival Combo brings 2 fully assembled RC cars into one set, creating instant side-by-side racing with matching 2.4 GHz radio control. Each model measures 304 mm in length and uses a 3.7 V Li-Ion drive battery with 500 mAh capacity, giving the pair a compact racing format with rechargeable power for repeated sessions. The set includes 2 remote controls, 2 Li-Ion drive batteries, 2 USB chargers and 4 AA transmitter batteries, so both vehicles are equipped for running from the start. A maximum driving time of 40 minutes keeps races going beyond a quick sprint and leaves room for repeated heats, overtaking attempts and back-to-back comparisons between the 2 cars. The pistol-grip transmitters use a trigger for throttle input and a side steering wheel layout familiar from hobby-grade RC driving. Steering fine adjustment on the vehicles helps correct the running direction when the track or surface calls for a more precise setup. Front LED lighting remains clearly visible as the cars move through indoor floors or paved outdoor sections, while the printed body shells give each model its own strong race-day presence. With an age marking of 8 years and up, the set suits shared racing sessions at home, quick duel formats in the driveway and casual practice laps where both cars can be charged, lined up and sent off again.

RC lorries & RC trucks

1:14 3-axle Material trailer, RC trailer

€699.99

At 1:14 scale, this 3-axle Material trailer brings the look and handling of a working cargo hauler into a detailed RC setup. The 981 mm long body combines a laser-cut steel frame in 3 mm and 1 mm sections with a real wooden floor application, creating a technical build with strong visual contrast between metal structure and load bed. The front wall is made from aluminium, while the rear bumper uses 8 mm aluminium for a solid, sharply defined finish. Left and right steel underride protection adds another authentic construction detail to the lower sides. The CNC-milled aluminium dropsides carry engraved surfaces and are built for active use rather than fixed display, with 9 functional panels, removable dropside posts, and 4 hinges on each dropside made from 1 mm steel. Neodymium magnets handle the locking, giving the side sections a tidy closing action without bulky external catches. Wide chromated wheels with ball bearings and wide tyres support smooth trailer movement, and the included suspension offers an optional 8 mm elevation for a different ride height. A steel spare wheel holder with spare wheel is fitted, and the finished trailer measures 981 x 195 x 210 mm with a weight of 6,900 g. Age 14+

RC cars

1:14 Lam.Murcielago SV2.4G, RC car, 100% RTR

€54.99

The Lamborghini Murcielago SV translates the dramatic lines of the full-sized supercar into a 1:14 RC model with compact road presence and strong visual detail. At 330 mm long, 145 mm wide and 80 mm high, the body carries opening doors and a lifting hood that add hands-on interaction beyond pure driving. The detailed interior gives the cabin more depth when the body is viewed up close, while the front and rear LED system keeps the silhouette readable in lower light. A differential gear manages the drive effect between the wheels during turns, which helps the model hold a cleaner line through changing corners. Fully sprung suspension adds another mechanical layer, allowing the chassis to settle more evenly as the surface changes. The model weighs 631 g, giving it a planted feel in motion without losing the agile character expected from this scale. The fully assembled 100% RTR format keeps the focus on driving rather than setup, with a 2.4 GHz remote control unit included in the set. Also included are the 7.4 V 500 mAh Li-Ion drive battery, a USB charger and 2 x LR06 batteries. Driving time reaches up to 25 minutes, making the model well suited to repeated laps, short handling sessions and display breaks between runs.

RC lorries & RC trucks

1:20 MB Arocs Goldhofer, RC truck, 100% RTR

Heavy-haul transport is a defining part of construction logistics, and the 1:20 MB Arocs Goldhofer brings that role into RC form with a 1000 mm long truck and low loader combination. The fully assembled RTR set combines remote-controlled driving with functional trailer handling, creating a model that looks at home moving machinery between workshop shelf and jobsite scene. At 155 mm wide and 185 mm high, the model carries the long, low stance of a transporter, while the 1350 g weight gives the combination a substantial feel in hand. The installed reversing light works automatically together with the tractor unit, adding a realistic response during manoeuvres without needing a separate command. Included in the set are the ready-to-run model, a 2.4 GHz RC system, 2 x 4.8 V NiMH batteries, a USB charger and 2 x AA transmitter batteries. The 30 minute driving time supports extended loading runs, repositioning moves and repeated coupling sequences. Minimum age: 8 years. The low-bed layout suits transport scenes with construction machinery or other scale loads, and the remote-controlled ramp and support add movement beyond simple forward driving. On a floor layout, workshop setup or construction-themed display, the MB Arocs Goldhofer turns loading, uncoupling and trailer positioning into the central part of the action.

RC cars

1:24 Ford GT, RC car, 2.4 GHz RTR

€24.99

The Ford GT became one of the defining super sports car shapes of its era, and this 1:24 RC car brings that low, wide silhouette into a compact format built for quick laps and precise control. With a fully assembled ready-to-run setup, the model goes straight from charging to driving with the included 2.4 GHz remote control, Li-Ion drive battery, USB charger and transmitter batteries. At 195 mm long, 80 mm wide and 49 mm high, the body keeps the proportions of the road car clear while staying easy to handle on smaller indoor routes. The 172 g weight gives the chassis a light, agile feel in motion, and the fine-tuned steering supports accurate line changes through short straights and tighter bends. Front and rear LED lighting extends the visual effect beyond daylight conditions, while the licensed Ford design and realistic sports car look keep the model closely tied to its full-size inspiration. The 3.7 V drive system uses a 500 mAh Li-Ion battery and reaches up to 60 minutes of driving time at full capacity, making longer sessions possible without frequent charging breaks. Non-slip rubber tires work with the rear differential to maintain traction and stable handling as the car accelerates, turns and settles into repeated circuit runs. Age 6+ marks the recommended age, and the complete RTR format suits first RC laps as well as relaxed driving sessions for motorsport fans.

RC cars

1:24 Lamborghini Murcielago SV, RC car, 2.4GHz

€24.99

The Lamborghini Murcielago SV brought sharp-edged supercar drama to the road, and this 1:24 RC version translates that character into a compact model with full driving control. At 195 mm long, 80 mm wide and 49 mm high, the ready-to-run car combines a detailed sports car silhouette with a 2.4 GHz remote control system for responsive runs around living rooms, hallways and home tracks. A 3.7 V 500 mAh Li-Ion drive battery powers up to 60 minutes of driving time, and the included USB charger keeps the setup straightforward between sessions. The fully assembled format gets the focus onto driving rather than setup, while the 172 g weight keeps the model light in hand when moving from shelf to floor. Front and rear LED lighting extends the visual effect into dimmer conditions, giving the body lines and rear spoiler extra presence once the room lights drop. The remote control system is designed for interference-free operation, which helps when several 2.4 GHz vehicles are in use nearby. Short sprints down a corridor, tighter turns around chair legs or repeated laps on a small practice layout all suit the compact footprint. Age 6+ is stated in the product data, and the complete set includes the car, remote control, drive battery, USB charger and transmitter batteries for a quick start to the next run.

Mini RC cars

1:50 Nano City Dump Truck, RC truck, 2.4 GHz

€18.99

Construction trucks have long shaped city streets and building sites with their compact strength and unmistakable working profile. The 1:50 Nano City Dump Truck brings that familiar form into a small RC format with a true-to-original design, a detailed driver's cab and a ready-to-run setup for immediate use. Its fully assembled layout keeps the focus on driving, while the 146 g weight and 135 mm length create a handy format for controlled manoeuvres on tables, floors or improvised indoor routes. The open dump body gives the model its recognisable utility-truck silhouette, and the non-slip rubber tires provide the grip needed for cleaner starts, tighter turns and steadier movement on smooth surfaces. The 2-channel 2.4 GHz radio system supports interference-free control, which is especially useful when several radio-controlled models are active nearby. LED lighting adds another working-vehicle detail and makes the truck easier to track when the route runs through dimmer corners. Included in the set are the ready-to-run model, a 2.4 GHz remote control, a 3.7 V 500 mAh Li-Ion drive battery, a USB charger and instructions. With up to 40 minutes of travel time, the compact dump truck suits quick driving sessions, small construction-themed layouts and repeated laps through indoor obstacle courses.

RC buggys

1:8 Akuma Buggy, RC car, 4WD 100% RTR

€399.99

The 1:8 Akuma Buggy brings large-scale off-road driving into a 505 x 365 x 220 mm format with a 4WD layout, a 2050 Kv 3-pole brushless motor and a 100A 4S drag-style ESC with cooling fan. The colour-printed body, 3-position adjustable rear spoiler and 17 mm aluminium wheel hexes give the buggy a focused racing stance before the first full-throttle pass. A 3 mm aluminium chassis plate forms the base for the drivetrain, while the aluminium motor heatsink supports cooling during hard acceleration. The steering system uses an adjustable aluminium steering plate, and the 20 kg metal-gear servo translates radio input into direct front-wheel response. Aggressive off-road tyres with foam inserts are glued in place for consistent running, and the hardened steel drive shafts connect the powertrain under load. The included 2.4 GHz RC system, 2 x 7.4 V 3800 mAh LiPo drive batteries, charger and 4 x LR06 AA transmitter batteries make the set ready to drive straight after charging. Driving time reaches 10 minutes, and the buggy weighs 3909 g. Forest tracks, compacted dirt and rough open ground suit the Akuma Buggy especially well, where the suspension travel and 4WD drivetrain can be used to carry speed through loose sections. The large 1:8 format also gives the chassis and electronics layout clear presence on the bench between charging sessions and setup checks.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 M-B Unimog U406, RC truck, 100% RTR

€114.99

The Mercedes-Benz Unimog U406 has long stood for compact utility vehicle engineering, and this 1:87 RC version carries that character into a small-format driving model with a matching trailer. In bright orange with detailed paintwork and precise printing, the Unimog combines a true-to-original look with compact radio-control technology for controlled runs across a desk layout, a diorama road or a small indoor course. The 2.4 GHz remote control is part of the 100% RTR setup, so the model arrives with the core driving equipment already matched to the vehicle. Front and rear LEDs work alongside the switchable warning light to sharpen the service-vehicle appearance during operation. Steering trim on the transmitter helps fine-tune straight running, which is especially useful at 1:87 scale where small corrections show clearly. The permanently installed Li-Ion battery is rated at 3.7 V and 75 mAh, and the set also includes the required transmitter batteries plus a storage case for transport and tidy shelf keeping. The trailer broadens the operating scene beyond simple laps, with a tilting bed and removable tarpaulin that suit loading and unloading setups in miniature worksite or farm-style layouts. With age recommendation 14 years and up, the model fits hobby sessions focused on compact manoeuvres, display layouts and detailed vehicle handling in limited space.

RC models in 1:87 scale

1:87 MB 1620 flatbed truck, RC model, RTR

€129.99

The 1:87 MB 1620 flatbed truck with trailer brings compact RC control into H0 railway scenes with a fully assembled 100% RTR setup and finely scaled proportions. At 187 mm in length, the model is sized for dioramas and model railroad layouts where precise movement, lighting and sound add life to streets, depots and loading areas. A 2.4 GHz remote control system handles steering, speed and the switchable engine sound, while the integrated 3.7 V 75 mAh Li-Ion drive battery recharges through the transmitter in about 45 minutes. Front and rear LED lighting supports realistic operation in dimmer layout settings, and the very small turning circle helps the truck work through narrow routes and confined manoeuvring zones. The detailed body uses high-quality plastic construction with fine printing, and the removable tarpaulin changes the look of the trailer for different scene setups. A driver figure adds another scale detail for display, and the included trailer extends the vehicle's presence in transport scenes. With up to 60 minutes of operating time, the model suits longer running sessions on H0 layouts, from careful reversing at a loading bay to steady road movement between buildings and trackside structures.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Mercedes Benz 200/8 Taxi, RC car, RTR

€109.99

The Mercedes Benz 200/8 shaped the look of everyday saloons in the late 1960s and 1970s, and this 1:87 RC car brings that familiar taxi silhouette into a compact radio-controlled format. The small scale and RTR layout combine classic road-car character with immediate driving action on desks, display areas, or smooth indoor surfaces. Its 100% RTR specification means the key running setup is already part of the set, keeping the focus on steering inputs and controlled movement rather than sourcing core equipment first. The included 5 batteries support a ready-to-start configuration straight from the pack. With a recommended age of 14 years, the handling and scale suit enthusiasts who enjoy compact vehicle models with a recognisable real-world subject. The taxi styling gives the body a distinct period look that stands apart from modern racing or off-road themes. Between short driving sessions, the 1:87 format also makes the model easy to place in a collection of miniature road vehicles. It works well as a small RC model for indoor runs, as a conversation piece on a shelf, or as a classic Mercedes Benz subject in a compact hobby lineup.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 Mercedes Benz 200/8, RC car, 100% RTR

€109.99

The Mercedes-Benz /8 series shaped everyday motoring in the late 1960s and 1970s, and this 1:87 Carson model captures that familiar saloon silhouette in a compact radio-controlled format. Finished in blue and supplied as a 100% RTR version, the miniature is set up for immediate use with 5 batteries included. Its 1:87 scale gives the model a notably small footprint, making controlled runs possible in spaces where larger RC cars would feel oversized. The classic 200/8 body shape brings a recognisable road-car character to each manoeuvre, while the compact format invites careful steering, short direction changes and neat placement on smooth indoor surfaces. With batteries already part of the set, the focus stays on the driving session itself rather than on sourcing the basic power supply first. Between runs, the blue finish and saloon proportions also make the model easy to place on a desk or shelf as part of a collection of compact vehicles. The combination of RTR convenience, included batteries and 1:87 scale makes this Mercedes Benz 200/8 a concise entry into small-format RC driving for hobbyists aged 14 years and up.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Bus Van, RC car, car trailer

€114.99

The VW T1 became one of the most recognisable light commercial vehicles of the 1950s, and this 1:87 RC version brings that silhouette into a compact driving format with a matching car trailer. At 115 mm long, 28 mm wide and 21 mm high, the ready-to-run model fits neatly into small layouts while still carrying the bus profile, printed finish and illuminated front and rear lighting. The 2.4 GHz radio system gives stable control for 1-player operation, and the fully proportional setup allows measured inputs instead of simple on-off movement. With a weight of 18 g, the model stays light in hand and easy to place on shelves or in model scenes between runs. The included Li-Ion drive battery is rated at 3.7 V and 75 mAh, while 4 LR03 AAA transmitter batteries are also included in the set. Steering trim supports precise correction when the bus tracks slightly left or right, which is especially useful on narrow routes where the small turning circle can be used to full effect. The display case adds a clean way to store the bus and trailer between sessions or present them as part of a collection. On a desk, shelf layout or compact indoor course, the combination of trailer detail, proportional control and long 50-minute runtime creates a focused micro RC driving session with a strong model-railway scale presence.  Warning! Not suitable for children under 14 years.

RC models in 1:87 scale

1:87 VW T1 Pritsche, RC car, green trailer

€104.99

The VW T1 became one of the defining light commercial vehicles of the post-war era, and this 1:87 RC version captures that familiar silhouette in a compact format with a green car trailer behind it. The radio-controlled layout turns the classic VW T1 Pritsche into a moving scale model that combines display character with active handling on a small footprint. Its 1:87 scale makes the model easy to place on layouts, shelves, or desks where larger vehicles would need far more room, while the trailer adds a second visual element that extends the transporter theme beyond the cab itself. The green finish gives the combination a clear, period-inspired presence, and the Pritsche body style keeps the utility look of the original vehicle at the centre of the design. As a powered ground vehicle, it brings motion to a format often chosen for static collecting, which changes how the model can be used between display moments and controlled runs. 5 batteries are included. The age marking is 14 Years. The compact dimensions implied by 1:87 scale suit short driving sessions on smooth indoor surfaces, model layouts, or table-based scenes where precise movement matters more than outright speed. It also fits neatly into collections built around classic transport themes, especially where a trailer combination adds extra visual interest without taking over the whole scene.

RC models in 1:87 scale

1:87 VW T1 SambaBus, RC car, 2.4GHz RTR

€114.99

The VW T1 SambaBus with trailer brings classic touring style into compact RC form at 1:87 scale. The ready-assembled set pairs the iconic bus silhouette with a matching caravan, while front and rear LED lights add visible presence during each run. A 2.4 GHz remote control system handles the model with fully proportional inputs, so throttle and steering respond in fine steps rather than simple on or off commands. Steering trim helps keep the vehicle tracking cleanly, especially on narrow routes and detailed miniature layouts. The 3.7 V 75 mAh Li-Ion drive battery supplies the power, and the transmitter also serves as the charging connection with a 60 minute charge time. The compact format and very small turning radius suit controlled driving in limited space where broader models would need more room. The combination of SambaBus and caravan creates a distinctive road-trip scene for shelf display, diorama use or active driving sessions. Included in the set are the ready-to-run model, the 2.4 GHz remote control system, the Li-Ion drive battery and 4 AAA transmitter batteries, so the model is equipped for use straight from the set.  Warning! Not suitable for children under 14 years.

RC quadcopters

Cyber Drone IR RTF, quadcopter, 360° flips

€25.99

The Cyber Drone IR RTF brings compact quadcopter flying into a nimble 125 mm x 135 mm format with a 150 mm diameter and a 45 mm rotor diameter. A button-triggered 360° flip function adds fast aerial action, while the Coming Home function returns the quadcopter to its home point at the touch of a button, creating a clear, easy rhythm between short flights and recovery. Its 3.7 V/600 mAh LiPo flight battery supports up to 8 minutes of flight time, and the 50 g ascent weight keeps the model light in the air. The IR control concept is paired with 3 speed settings, so the handling can stay measured for early practice or become more lively for tighter reactions. Blue LED lighting adds clear visual orientation once the quadcopter lifts off, especially when the frame is moving quickly through flips, turns and short climbs. The green finish gives the model a bright, high-contrast look in motion. Short sessions in the living room, open indoor areas or calm practice runs with repeated take-offs and landings all suit this ready-to-fly setup. Included contents are the ready-to-fly model, IR remote control, LiPo flight battery 3.7 V/600 mAh, USB charger and instruction manual.

RC quadcopters

Cyber Drone Polizei, quadcopter, 2.4G RTF

€34.99

The Cyber Drone Polizei 2.4G 100% RTF brings compact quadcopter flying into a ready-to-fly format with a 2.4 GHz remote control, a 3.7 V 600 mAh LiPo battery and a USB charger. With a length of 125 mm, a width of 135 mm, a diameter of 150 mm and a rotor diameter of 45 mm, the layout stays light at 50 g ascent weight and suits quick take-offs in smaller open spaces. Its control setup combines several functions that shape how the model behaves in the air. The 8 minute flight time supports short, focused rounds, while the included transmitter power uses 3 AAA batteries. The headless mode changes orientation handling by referencing the control direction rather than the nose position, which helps keep steering inputs easier to read during turns. Trim adjustment for left and right flight allows finer correction when the quadcopter drifts off line. Blue and red flashing LEDs remain easy to spot once the model lifts away from the launch point. Ready-to-fly equipment keeps the set focused on getting airborne with minimal preparation, whether the session starts on a driveway, in a yard or across a calm section of park ground. The compact dimensions, return function and selectable speed levels make it easy to alternate between steady hovering, directional practice and quick stunt passes in the same outing.

Model tanks

DUKW Amphibious Truck Model Kit 1:72 Scale

€15.99

The Italeri 1:72 DUKW Amphibious truck model kit brings a historic military transport into a compact build with the unmistakable shape of its amphibious hull and 6x6 layout. At about 117 mm in length, the finished model fits neatly into display cabinets, convoy scenes or beach landing dioramas while still leaving room for painted detail across the cab, cargo area and hull sides. The full-size DUKW was developed from the General Motor CCKW-353 2 1/2 t tactical transport truck to move loads quickly from ships to beaches during landing operations. Its 4,400 cm3 6-cylinder engine, three differentials and six driving wheels formed the mechanical basis, while the welded hull with horizontal rib reinforcement gave the vehicle its amphibious role. This kit translates that distinctive combination into a detailed plastic build that invites careful assembly, painting and finishing. Decals for 1 version are included to add markings once construction is complete. The subject suits historically focused model collections and WWII scene building, especially where transport vehicles add context beyond tanks and artillery. Assembly is required and the stated assembly time is 600 minutes. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

RC helicopters

Easy Tyrann 280, RC helicopter, 2.4 GHz RTF

€39.99

The Easy Tyrann 280 brings coaxial helicopter flying into a compact 280 x 200 x 125 mm format with a ready-to-fly setup, a 2.4 GHz control system and a top speed of 25 km/h. Its blue and black body, landing skids and illuminated nose give the model a clear presence as it lifts off for first hovering attempts in the living room or on a calm patio. Integrated gyro electronics support steadier flight characteristics, while the aluminium tail boom adds structure to the rear section during directional control. Left and right trim can be adjusted from the transmitter to correct the flight path in the air rather than interrupting a session. The switchable LED position indicators help keep orientation visible when the helicopter turns or moves further from the starting point. A 3.7 V 250 mAh LiPo flight battery powers runs of up to 8 minutes, and the included USB charger handles recharging between flights. The set also includes 3 x AAA transmitter batteries, so the model arrives with the key operating components in the box. This RC helicopter fits short practice sessions, from learning stable hovering indoors to controlled passes in light outdoor conditions. With 12 Years as the stated age marking and 1-player operation, the Easy Tyrann 280 suits focused solo flying where control inputs, trim changes and throttle feel can be learned step by step.

Model figures

French Warriors Model Kit 1:72 Hundred Years War

€10.99

Italeri French Warriors brings the Hundred Years War into 1:72 scale with a historical figure assembly kit built around cavalry and infantry. The set contains 28 unpainted figures in total, made up of 20 soldiers, 8 knights and 8 horses, creating a strong base for medieval battle lines, mounted charges or courtly escort scenes. The unpainted finish keeps every shield, surcoat and horse covering ready for individual colour work, whether the aim is a restrained campaign palette or bold heraldic contrast. Mounted and foot figures allow different scene structures within the same set, so a display can shift from a compact knight formation to a wider battlefield arrangement. The 600-minute assembly time points to a substantial modelling project with room for careful preparation, painting and placement. As an assembly kit, it suits builders who enjoy shaping a historical scene figure by figure rather than placing a finished cast straight onto a base. On a shelf, in a diorama or across tabletop terrain, the 1:72 scale makes the group easy to combine with other period miniatures and scenery. Cavalry can be positioned at the front of a charge while soldiers fill out the background, giving medieval layouts more depth and a clearer sense of movement.

Military figures & accessories

Italeri 1:72 WWII American Infantry Model Kit

€10.99

Italeri 1:72 WWII American Infantry is an assembly kit that brings the look of the 1st Infantry Division into a compact scale suited to military dioramas and historical displays. The set contains 50 figures, giving enough miniatures to build a broad infantry presence with movement, spacing, and unit variety across a scene. The figures are represented with the typical equipment of American infantry during World War II, including the M1 Garand rifle, the B.A.R. automatic rifle, the M3 'Grease Gun' submachinegun, and the Bazooka. That mix supports different battlefield roles within the same set, from riflemen and automatic fire support to close-range submachine gun poses and anti-tank coverage. The 1:72 scale works well for combining the figures with vehicles, terrain pieces, and structures in the same scale. Assembly is required and takes 600 minutes. The kit comes as an assembly kit and the parts are supplied unpainted, leaving the finish open for historically inspired uniform colours and scene-specific detailing. The campaign background reaches from Operation Torch in November 1942 to Sicily, Normandy on June 6th 1944, the Ardennes, and the final advance into German territory in 1945. That span makes the set suitable for beach landings, winter battle layouts, road marches, or urban combat scenes where varied infantry poses help shape a more convincing composition.

Military figures & accessories

Italeri 1:72 WWII American Infantry Model Kit

€12.49

Italeri 1:72 WWII American Infantry brings a large formation of U.S. Army soldiers into a compact military model kit, with 48 unpainted figures arranged for historical scenes inspired by Operation Overlord. The 1:72 scale suits dioramas where troop movement, spacing, and battlefield structure matter, whether the layout focuses on a shoreline assault, an inland advance, or a defensive firing line. The set draws on the 1st and 29th Infantry Division, part of the Fifth Corps, and connects directly to the June 6th, 1944 landing at Omaha Beach between Vierville sur Mer and Sainte Honorine des Pertes. Across 3 sprues, the figures appear in varied action stances that help shape a more convincing unit composition instead of a repeated row of identical soldiers. Uniform gear and weapon handling reflect typical U.S. infantry equipment from the period, while the mix of rifles, automatic weapons, and support gun positions gives the group a clear battlefield character. The parts arrive unpainted, leaving full control over colour scheme, weathering, insignia style, and terrain matching. With a stated assembly time of 600 minutes, this kit suits longer bench sessions focused on trimming, painting, and arranging figures into a coherent scene. It can anchor a Normandy landing display, reinforce a larger World War II terrain build, or expand an existing 1:72 military collection with a substantial infantry presence.  Warning! Not suitable for children under 14 years.

Military figures & accessories

Italeri Alpini Figure Set 1:72 WWII Model Kit

€10.99

The Italeri Alpini figure set in 1:72 brings WWII Italian mountain troops into compact scale for dioramas, war game tables and historical displays. With 48 unpainted figures in the box, the set gives a scene the visual mass needed for defensive lines, marching groups or retreat formations shaped around the Russian front campaign of 1942 to January 1943. The subject draws on the Alpini Julia, Tridentina and Cuneense divisions, which fought on the Don front and later retreated across the Russian steppe under severe winter conditions. That background gives the figures a clear historical setting for snowbound layouts, battlefield vignettes and campaign-based collections. The sprues show multiple infantry poses, including advancing, prone and weapon-handling stances, along with mountain troop details such as skis, poles and field gear. Horse and mounted parts also appear on the frames, adding further options for scene composition. Assembly time is stated as 600 minutes, which suits a build focused on preparation, painting and placement. On a display base, the mix of repeated figures and varied actions helps shape larger formations with a consistent uniform look. In a diorama, the winter equipment and 1:72 scale make the set easy to combine with vehicles, terrain pieces and structures from the same period. Assembly kit. Minimum age: 14 years.

Model car kit

Italeri B.M.W. 320 Gr. 5 Model Kit 1:24

€36.99

The Italeri B.M.W. 320 Gr. 5 model kit in 1:24 scale brings a landmark touring car racer onto the workbench with the broad-shouldered Group 5 silhouette, race number 57 and the vivid 1978 DRM Norisring livery. As the build takes shape, the E21-based body, large fenders and rear wing give the car its unmistakable circuit stance. This assembly kit draws on the competition version developed after the FIA introduced the Group 5 rules in 1976 for special production cars. The real car used a new aerodynamic profile and a 300 hp engine, and that racing character carries through the model's proportions and surface details. Separate parts on black sprues form the chassis tub, suspension elements, cockpit fittings and exterior sections, so the structure develops in clear stages. The decal sheet goes beyond body graphics with driver identification, instrument faces and mechanical markings that sharpen the finished presentation. Assembly is required, with a stated build time of 600 minutes. On a hobby desk, the 1:24 scale supports careful painting, decal placement and final body fitment without crowding fine details. Once completed, the B.M.W. 320 Gr. 5 suits shelf display, diorama use or a line-up with other classic circuit racers from the same era.

Military figures & accessories

Italeri Battlefield Buildings Model Kit 1:72

€9.49

Italeri Battlefield Buildings is a 1:72 model kit for building WWII scenery that gives military layouts a defined checkpoint, lookout and field support area. The set combines a tall watchtower, a sentry hut with boom barrier and a covered shelter, creating a compact group of structures that can frame roads, camp entrances or defensive positions with a more complete battlefield setting. The watchtower stands on a narrow 4-leg structure with cross-bracing and a ladder leading to the roofed platform, while the hut and barrier form a clear access point for convoy or perimeter scenes. Textured parts on the sprues reproduce plank surfaces, ground sections and structural panels that respond well to careful painting and weathering. Additional accessories such as sandbags, crates, rocks and stretcher-style pieces help break up open ground and support more layered placement around vehicles and figures. A decal sheet is included for the shelter and checkpoint markings, including a red cross emblem and striped graphics. With 600 minutes assembly time, the build suits modelmakers who want scenery that adds narrative around 1:72 vehicles and figures rather than another standalone machine. The finished structures can anchor a border post, aid station, depot entrance or observation point, giving static displays and tabletop scenes more context at the edges of the action.

Military figures & accessories

Italeri British Paratroopers Model Kit 1:72

€10.99

Italeri 1:72 British Paratroopers brings a WWII airborne unit into miniature form with 50 unpainted figures designed for assembly and finishing. The set draws on the British 1st Airborne Division, known as the Red Devils, and places the scene in Operation Market Garden in September 1944, where airborne troops were tasked with securing key bridges over the Rhine and the Meuse. On the bench, the tan sprues show repeated figures and equipment laid out for a full unit build rather than a single display piece. The 1:72 scale makes the figures suitable for military dioramas, battlefield layouts and integration with other scenery of the same scale. Poses visible across the set include standing riflemen, advancing soldiers, kneeling shooters and prone figures, which helps create movement across rubble, streets or bridge sections. Sculpted uniform features include camouflage smocks, netted helmets, chest pouches, belts, straps, boots and rifles, giving painters defined edges for colour separation and weathering work. The stated assembly time is 600 minutes, which reflects a project with room for careful preparation, painting and scene planning. Placed across a bridge approach, ruined street or defensive line, the figures can form a compact airborne section with a shared historical identity. The set also works as a source of 1:72 infantry for expanding larger WWII layouts where repeated troop types and coordinated poses matter.

Military figures & accessories

Italeri French Infantry WW II Model Kit 1:72

€10.99

Italeri French Infantry WW II brings Free French Forces into 1:72 scale with 49 unpainted figures shaped for historical scenes from the Second World War. The assembly kit draws on the return of French units to Allied action in 1944, making it a strong base for dioramas that place infantry, support weapons and casualty evacuation into one coherent battlefield setting. The figure selection reaches beyond standard marching poses. Riflemen, stretcher bearers, a light machine gun position, a bazooka operator, a mortar team and observation roles with binoculars create a broader tactical spread across the set. That mix helps a builder stage movement, covering fire, reconnaissance and medical support rather than repeating a single stance across the whole display. Because the figures are supplied unpainted, the finish can follow campaign-specific uniforms, field gear tones and weathering effects chosen for Normandy or the Italian front. The 600 minute assembly time also points to a hobby build with room for careful cleanup, painting and placement. On a shelf, the set can form a compact historical vignette with layered action and clear role definition between the figures. On a wargaming table, the 1:72 format works smoothly alongside period vehicles, scenery and other military miniatures, helping larger World War II layouts keep a consistent visual scale while adding Free French infantry to the scene.

Military aeroplane models

Italeri Junkers JU-87B Stuka 1:48 Model Kit

€39.99

The Italeri Junkers JU-87B Stuka 1:48 model kit brings a defining Battle of Britain aircraft into a build that combines historical character with a clearly recognisable airframe. At 22.9 cm long, the finished model shows the inverted gull wings and fixed landing gear that made the Ju 87 silhouette so distinctive in period photographs and reference collections. This assembly kit is built around a detailed plastic format and includes a super decals sheet for 4 versions, opening several marking paths for the same aircraft type. The set also contains photo-etched parts, which add finer definition to selected details and support a more intricate finish than standard moulded sections alone. The subject itself reflects the Ju 87B as a two-seat dive-bomber and ground-attack aircraft first flown in 1935, with combat use beginning in 1936. Italeri frames this edition around the Battle of Britain 80th Anniversary, linking the model directly to a specific wartime chapter. A stated assembly time of 600 minutes gives the project a measured pace suited to careful painting, decaling, and staged construction. The completed aircraft sits well in a display line with other 1:48 aviation subjects, and the 4 marking versions create room to build a distinct variant within that scale collection. Recommended age: 14 years and up.

Model tanks

Italeri M4A2 U.S. Marine Corps Tank Kit 1:35

€35.99

Italeri M4A2 U.S. Marine Corps is a detailed 1:35 scale assembly kit that brings the Sherman medium tank into a focused build with a finished model length of 16.8 cm. The subject represents the diesel-powered M4A2 variant used by the United States Marine Corps in Pacific operations, giving the model a clear historical setting as the hull, turret and suspension come together piece by piece. The kit uses new gluable T54E1 tracks, a feature that adds extra definition to the running gear and changes how the lower hull reads once the tracks are fitted around the wheels and sprockets. A decal sheet for 4 versions opens up different marking choices, including named vehicles and alternate tactical codes, so the final finish can follow different U.S. Marine Corps examples from Iwo Jima in February 1945. The build is marked 14 Years+ and the stated assembly time is 600 minutes, which suits a project with multiple construction and finishing stages. Assembly kit contents are included. On the bench, the 1:35 format gives enough room to work through camouflage, turret markings and smaller exterior details with control. Once completed, the Sherman shape, Marine Corps markings and tracked stance give the model a strong presence in a WWII collection, diorama scene or display lineup centered on Pacific theatre vehicles.

Trailers & accessories

Italeri Reefer Trailer Model Kit 1:24 Scale

€62.99

The Italeri Reefer Trailer model kit brings a latest-generation refrigerated semitrailer into 1:24 scale with a finished length of 58.7 cm and a distinctly European freight profile. The long box body, front-mounted refrigeration unit and triple-axle rear section create the look of a temperature-controlled trailer waiting at a loading dock or lined up with a tractor unit in a road transport display. This assembly kit is built around the detailing that gives a reefer its working identity. The chassis construction, underbody equipment and support-leg structure shape the trailer from the frame upward, while the new wheels update the running gear for a more current appearance. Large side graphics for NORD CARGO, route names including Barcelona, Castellon, Madrid, Malaga and Moerdijk, plus rear-door markings and registration options add a commercial fleet character drawn from European cold-chain transport. The finishing stage also includes paintwork and decal application, which gives the long side panels and rear doors their full visual impact. With 600 minutes assembly time, the build suits a slower bench session focused on alignment, painting and final decoration. Paints, cement and tools are required separately. Once completed, the 1:24 trailer works well as a standalone display subject or as part of a larger truck modelling scene with depot, warehouse or highway freight context.

Model tanks

Italeri VW Typ 82 Kübelwagen Model Kit 1:35

€12.99

The Italeri 1:35 VW Typ 82 Kübelwagen brings a compact World War II military vehicle into a scale model format with a finished length of 10.6 cm. Its small footprint suits display in a cabinet, on a desk, or as part of a larger historical layout, while the open utility-car design gives the build a recognisable silhouette with clear body lines and period character. The kit is supplied as an assembly kit and is recommended for ages 14 years and up. A stated assembly time of 600 minutes points to a build that rewards steady, detailed work across the vehicle and the 2 included figures. The scale of 1:35 places the Kübelwagen in a format widely used for military modelling, making it easy to stage with terrain elements and scene accessories from the same scale. The subject draws on the vehicle's wartime use across demanding terrain, a background that gives the finished model a strong historical identity. On the workbench, the combination of vehicle, figures, and markings supports a complete scene rather than a standalone build. The decal sheet for 1 version helps define the final look, whether the model is placed in a desert setting, a field command scene, or a transport display focused on military vehicles of the period.

Military figures & accessories

Italeri Walls and Ruins II Diorama Kit 1:72

€9.49

Italeri Walls and Ruins II is a 1:72 assembly kit built around ruined architectural scenery for World War II dioramas. Broken walls, a large arch, smaller fragments and sandbag positions create the look of a shelled urban setting, giving military scenes a clear sense of place instead of leaving figures and vehicles on an empty base. The gray molded parts arrive on sprues and show engraved stone blocks, exposed brick, cracked plaster, wood details and rubble textures. One section carries an arched door, another a window opening, and the varied wall heights help shape sightlines, cover and depth across a compact display. Because the scenery is assembled from separate components, the layout can be planned around narrow streets, defensive corners or partially collapsed structures. The stated assembly time is 600 minutes, which suits a more involved build with painting and weathering stages. Placed beside 1:72 soldiers, artillery or vehicles, the ruin sections frame convoy routes, barricaded approaches and damaged strongpoints with a more convincing backdrop. The set also works as a focused terrain build on its own, where brick edges, masonry surfaces and sandbag details reward careful finishing and turn a plain base into a wartime street scene.

Military figures & accessories

Italeri WWII Accessories and Bunkers Model Kit

€22.99

Italeri WWII Accessories and Bunkers is a 1:72 model kit built around a fortified World War II bunker scene with terrain and defensive details. The finished layout brings together a bunker structure, a shaped ground base and a spread of scenic parts that give military displays a clear historical setting rather than a bare stand-alone structure. The kit uses unassembled moulded parts and a vacuum base measuring 262 x 156 mm to form the scene. Curved wall sections, textured terrain elements and smaller structural pieces shape the bunker itself, while separate scenic details build out the position around it. Sandbags, barrels, crates, barricade-style frames and anti-tank obstacles add layers that suit diorama composition, static military displays and other 1:72 layouts. The bunker design shown in the assembled scene features a grass-covered roof, firing slits and an entrance opening, giving the fortification a recognisable defensive profile. With a stated assembly time of 600 minutes, the build suits model makers who enjoy arranging scenery as well as structure. The completed scene works as a focal point in a WWII display, as a terrain feature alongside other 1:72 military subjects, or as a compact standalone diorama with battlefield character.

Model car kit

Mercedes 500 SLC Model Kit 1:24 Scale Coupe

€36.99

The Italeri Mercedes 500 SLC brings a classic 1970s coupe into 1:24 scale as a detailed assembly kit with crisp body lines, chromed parts and rubber tyres. The long bonnet, pillarless side profile and broad front grille give the finished model the unmistakable stance of the full-size grand touring car, whether it is built as a shelf display or as part of a classic road-car collection. This kit draws on the Mercedes-Benz 500 SLC, a coupe derived from the C107 series and powered in the original car by a 4973 cc engine with 237 HP. That background shapes the model's character: a large 2-door coupe with a strong road presence rather than a stripped competition machine. The exterior details visible in the source design include dual round headlights, a prominent star emblem, black lower body trim, chrome-style wheel covers and bumper-integrated lighting elements. The body finish shown for the model combines a light green main colour with contrasting metallic and dark trim areas, giving painters a clear route to a period-correct look. With a stated assembly time of 600 minutes and a 14 Years age marking, the build suits modellers who want time for careful preparation, painting and final detailing. On a workbench, the separate finishing stages let the chrome, body colour and tyre textures develop their own visual roles. Once completed, the coupe shape and classic Mercedes proportions give the model a composed display presence among road cars from the same era.

Model car kit

MiniArt D8511 Tractor Model Kit 1:24 Scale

€48.99

MiniArt D8511 brings a 1936 German industrial tractor into 1:24 scale as a detailed plastic model kit with a strong mechanical look and a clear vintage silhouette. The larger scale gives the finished tractor room to show its tall exhaust stack, exposed controls, broad wheels and body panels with more visual presence on the shelf. The assembly kit is built around multiple molded parts that represent the tractor's structure and working hardware rather than a simplified toy-like form. Sprue details shown for the kit include cylindrical tank elements, pipe sections, bracket parts, platform surfaces and engine-area components that help shape a more technical build. A separate decal sheet adds period markings such as LANZ graphics, identification numbers and small warning labels, supporting a finish that matches the industrial character of the original machine. The stated assembly time is 600 minutes. Paints are required separately. On the workbench, the 1:24 format leaves enough space for careful painting, decal placement and weathered finishing effects across the tractor's body and mechanical areas. Once completed, the D8511 suits display in a vehicle collection, a historic machinery lineup or a diorama scene centered on 1930s industrial transport.  Warning! Not suitable for children under 14 years.

RC helicopters

Nano Tyrann 230 Gyro, RC helicopter, 2CH IR

€24.99

Compact dimensions and a coaxial rotor layout give the Nano Tyrann 230 Gyro a light, agile presence in indoor flight, while intelligent gyro electronics keep the model composed during lift-off, hovering and direction changes. At 225 mm long, 97 mm high and only 31 g in weight, this 2-channel RC helicopter brings controlled handling into a format that is easy to store and quick to prepare. The infrared control system focuses the flying experience on the core inputs, with left and right trim on the transmitter to correct the track when needed. A 3.7 V 130 mAh LiPo flight battery powers up to 8 minutes of flying time, and charging runs through the included USB cable. The rotor diameter of 180 mm gives the helicopter a balanced footprint for indoor rooms, where short climbs, hovering practice and careful turns can be repeated in a manageable space. The switchable LED adds a visible point at the nose during flight and can be controlled directly from the transmitter. The ready-to-fly set suits spontaneous sessions in living rooms, hobby spaces or other indoor areas where compact RC aircraft can be flown with precision. Age 12 years and up. Only suitable for indoor use.

Military figures & accessories

Pz.Kpfw. V Panther Ausf. A 1:72 Model Kit

€15.99

The Italeri Pz.Kpfw. V Panther Ausf. A in 1:72 scale brings one of the most recognisable WWII tank designs into a compact model format with a strong historical identity. The finished subject combines the Panther's angled front armour, turret silhouette and long-barrelled main gun in a size that suits shelf display, collection cabinets and tabletop military layouts. This detailed plastic kit is built from multiple sprues that cover the hull, turret, road wheels, drive sprockets and exterior fittings. The turret assembly uses separate parts for the gun barrel, mantlet and roof details, while the hull construction adds deck features, side components and smaller mounted elements for a more layered finish. The instructions also show optional Zimmerit surface texturing for builders who want to recreate anti-magnetic coating effects on the vertical and sloped armour plates. Historical finishing is a major part of the build, with 5 marking versions and camouflage references spanning April 1944 to April 1945. During the build, the compact 1:72 format still leaves room for distinct details such as the running gear, side skirts and turret fittings, making painting and weathering especially rewarding. The included figure can be placed with the completed tank to strengthen scale presence in a display or diorama scene. Assembly kit contents are included, while cement, paints and tools are required separately.  Warning! Not suitable for children under 14 years.

Cars

Scalextric Brabham BT26 Monaco GP '69 Slot Car

€79.99

Scalextric Brabham BT26 brings the Monaco GP '69 car into 1:32 scale with the slim nose, open cockpit and exposed-wheel Formula layout that defined late-1960s grand prix racing. The dark blue body, white aero elements and period number panels give the model a clear race-day identity as it threads through bends on a slot circuit. Close inspection reveals silver suspension parts, side exhaust pipes, rear wing supports and an exposed engine area with visible intake detail. Sponsor markings such as Dunlop, Autolite and Castrol deepen the historic racing character, while the seated driver figure with helmet adds another layer of realism to the cockpit view. The guide beneath the front section keeps the car aligned in the slot, turning the detailed body into a working racing model rather than a static replica. On a home layout, the compact 1:32 format suits head-to-head running, pit-lane scenes and display between races. Age 14 Years. Whether circling a straight, diving into a curve or parked trackside, the Brabham BT26 carries the look of a classic Formula machine in a format made for slot racing.

Cars

Scalextric Lotus 79 #5 Andretti 1978 Slot Car

€75.99

Scalextric Lotus 79 #5 Andretti 1978 brings the shape of a World Champion Formula 1 car into 1:32 slot racing with a black and gold livery, open cockpit and the low, winged profile that defined its era. Set on the rails, the car combines historic motorsport character with the focused feel of a single-seater built for fast circuit running. The bodywork carries period markings such as John Player Special, OLYMPUS CAMERAS and Valvoline, with the number 5 placed into the race layout seen across the nose, side and rear sections. A silver driver helmet with red striping sits in the cockpit, adding a clear focal point when the car is viewed from above or from the side of the track. The front wing, rear wing, sidepods and exposed wheel layout give the model the unmistakable proportions of a late 1970s Grand Prix machine. Close-up views also reveal details around the rear section, where the wing, engine area and upper body surfaces add extra visual depth. On a home circuit, the 1:32 scale suits close racing, lane changes and repeated laps where the long, low silhouette stays easy to read through bends and straights. The same detailing also gives the car a strong shelf presence between sessions, especially when the black finish, gold pinstriping and race graphics are seen from a side or top angle.  Warning! Not suitable for children under 14 years.

Cars

Scalextric Porsche 963 Daytona 25 1:32 Car

€59.99

Scalextric Porsche 963 Daytona 25 captures a current endurance racing shape in a 1:32 slot car format, pairing the low, wide prototype profile with the JDC Miller MotorSports livery for a focused circuit presence. The Porsche 963 name and Daytona 25 race theme give the car a recognisable motorsport identity that reads clearly on the track as it moves through bends, chicanes and straights. The 1:32 scale keeps the car aligned with a widely used slot racing format, making it a natural fit within existing race line-ups and garage displays. Its modern prototype silhouette brings a different visual character from GT and touring entries, with a body shape defined by endurance-racing proportions rather than road-car cues. The named JDC Miller MotorSports decoration adds team-specific detail instead of a generic race finish, which helps each lane assignment and race order stay easy to follow during head-to-head sessions. Batteries are not included. With an age marking of 14 Years, this car sits in the older hobby category and suits collectors as well as regular home circuit use. It works well as a single addition to a current grid, as a themed Daytona entry for endurance-style running, or as part of a broader modern prototype line-up built around real race names and liveries.  Warning! Not suitable for children under 14 years.

Cars

Scalextric Puma Rally Hot Laps Race Set

€189.99

Scalextric Puma Rally Hot Laps brings 1:32 slot racing into a rally themed layout with 2 Ford Puma Rally1 cars, a 532 cm circuit and a raised flyover that breaks the lap into fast straights, tight turns and a clear overhead crossing. The finish gantry and lane markings frame each run with a race day look that suits repeated head to head sessions. The set uses wired hand controllers with red and blue trigger sections, making lane identity easy to read at a glance while the speed limiter supports steadier throttle control. The Hot Laps app extends the racing format with single player championship and 2 player head to head modes shown on the mobile interface. Course selection in the app includes Desert Stage, Forest Stage and Mountain Stage, each presented with its own difficulty level. The track footprint measures 210 x 140 cm, giving the figure 8 style layout enough width for the bridge supports, long sweepers and the start area. On a table, playroom floor or hobby setup, the circuit creates a compact rally scene with visible elevation change and a strong sense of competition between both lanes. The Ford Puma Rally1 pair suits quick rematches, timed laps and side by side duels where the crossover, finish line and controller input stay in constant view. Age 14 Years  Warning! Not suitable for children under 14 years.

Cars

Scalextric Williams FW11B 1987 Slot Car 1:32

€75.99

Scalextric Williams FW11B 1987 brings a classic Grand Prix silhouette to 1:32 slot racing with its low single-seater body, open cockpit and prominent front and rear wings. The number 5 livery and Honda-powered Williams styling give this model a strong late-1980s Formula 1 identity that reads clearly on the circuit and in a display line-up. The bodywork carries period-style sponsor graphics across the nose, side sections and rear wing, while the exposed suspension styling and driver helmet detail add depth to the racing replica. Beneath the car, the guide blade sits in the slot and the pickup braids draw power from the rails, the core mechanism that lets the car follow the groove through straights and bends. Black wheels and wide slick tyres complete the era-correct look, matching the visual language of Grand Prix cars from the 1987 season. On a home circuit, the compact 1:32 scale fits naturally into established slot layouts and makes close wheel-to-wheel sessions easy to stage. Between races, the bold yellow, blue and white colour scheme, tall rear wing and crisp markings give the Williams FW11B 1987 a strong shelf presence for motorsport collections. Age 14 Years

Model trucks

Scania T143 M500 Top Line 1:24 Model Kit

€62.99

The Italeri Scania T143 M500 Top Line captures a landmark heavy truck in 1:24 scale, translating the presence of the 1990s road icon into a detailed assembly kit. Its subject is the Scania 143 M500 Topline, a tractor unit known for combining long-distance capability with a high cab format that gave the vehicle its unmistakable road profile. The original truck was defined by a 500-horsepower V8 engine and a 16-speed transmission, and those specifications give this model much of its appeal as a technical replica. The Topline configuration is central to the look, with a high, spacious cabin that set this version apart within commercial transport. The source vehicle was also associated with an advanced braking system, air suspension, strong efficiency and substantial load capacity, placing it firmly in the world of heavy logistics. Assembly is required, and the stated build time is 600 minutes. The box contents list an assembly kit. On the workbench, the 1:24 format gives the truck a scale large enough to reward careful painting and finishing while keeping the build focused on a single classic tractor unit. Once completed, the model suits display settings that highlight cab shape, grille details and the character of a well-known European long-haul design. Minimum age: 14 years.  Warning! Not suitable for children under 14 years.

Model tanks

Sd.Kfz. 171 Panther Ausf. A 1:35 model kit

€36.99

The Italeri Sd.Kfz. 171 Panther Ausf. A in 1:35 scale brings one of the most recognized WWII tank designs into a build focused on shape, surface detail and historical finishing. The assembly kit centers on the Panther Ausf. A configuration, with the angled front armour, turret form and long 75 mm KwK 42 gun giving the model its unmistakable stance on the shelf or in a diorama scene. The full-size vehicle was developed in response to the Soviet T-34 and KV-1 and combined mobility, armour layout and firepower in a design that served on several major fronts. That background gives the model a strong historical identity while the kit format leaves room for careful painting and weathering work. Assembly time is stated as 600 minutes. The box contents are listed as an assembly kit. Paints, cement and tools are required separately. Marking choices support several wartime versions, including vehicles used in Normandy, Northern Italy and Ukraine during 1944, which opens the door to different camouflage treatments and unit presentations. On a workbench, the build suits methodical step-by-step construction; once finished, the 1:35 scale format sits naturally in a military display alongside other armour subjects and scenery elements. Age 14 Years+

RC helicopters

Toxic Spider 340, RC helicopter, 100% RTF

€39.99

The Toxic Spider 340 100% RTF combines a coaxial rotor system, intelligent gyro electronics and a compact indoor format in one ready-to-fly RC helicopter. Black and green styling, illuminated LED headlights and a top speed of 10 km/h give each flight a crisp, technical presence as the model lifts from its landing skids and settles into stable hovering. Its 2.4 GHz remote control system works with 3.5 channels, allowing coordinated inputs for ascent, descent, turning and directional correction. The aluminium tail boom adds a light, rigid rear structure that supports balanced handling in the air. A 3.7 V 400 mAh LiPo flight battery powers the helicopter for up to 8 minutes, giving enough time for repeated take-offs, short circuits and hover practice. Included in the set are the ready-to-fly model, the remote control system, the LiPo flight battery, a USB charger, 3 transmitter batteries and instructions. The age marking is 12 years and up. Indoor sessions suit the Toxic Spider 340 especially well, whether the focus is on learning steady hover control in a living room or linking smooth turns through open space in a hallway. With the charging gear and transmitter batteries already included, the set brings the key flying components together in one box for immediate RC action after charging.

RC tires & rims

1:10 2WD Wheel Set XL, RC tire set

€37.99

Large-diameter tires can transform the look and running character of a 2WD model, and this 1:10 2WD Wheel Set XL is built exactly for that step. The set combines 4 XL wheels in a black and white finish with front-axle steering levers, creating a coordinated upgrade for buggy and truck chassis that move toward a monster-style setup. The technical layout is split clearly between front and rear fitment. Front rims are prepared for ball bearings, while the rear rims use Tamiya 12 mm hex mounts, matching a common 2WD drivetrain arrangement. Each tire measures 105 mm in diameter and 65 mm in width, dimensions that change both ground presence and the tire footprint on uneven surfaces. The included steering levers are not an afterthought; they are supplied specifically for the front axle because the larger wheel size can alter conventional steering angles. That added hardware keeps the conversion focused on usable steering response rather than appearance alone. On gravel, dirt and rougher off-road sections, the broader tire format gives 1:10 2WD builds a more planted contact area. The set suits rebuilds, visual conversions and chassis updates where standard wheels look undersized against a taller off-road stance. Age 14+

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD

€31.49

Built for 1:10 2WD buggies and trucks, this 4-piece all-terrain wheel set brings a track-ready combination of steering precision and drive traction to mixed surfaces. The black and white wheel design pairs 2 front tyres and 2 rear tyres in different widths, creating a layout that suits the demands of a 2-wheel-drive setup on road, gravel, sand and grass. At the front, the 26 mm tyre width supports a more exact steering response, while the 43 mm rear tyres give the driven axle a broader footprint for stronger acceleration grip on loose ground. Each wheel has a 90 mm diameter, giving the chassis a useful balance of agility and clearance over uneven terrain. Foam inserts inside the tyres help the contact patch stay consistent as the model changes direction or loads up under power. The front rims are designed for ball bearings, and the rear rims use Tamiya hex mounts, matching the different mounting needs across the vehicle. Because the tyres are professionally pre-glued, the set goes straight into the workshop plan without a separate bonding step. That makes it a practical choice for replacing worn running gear, preparing a buggy for mixed-surface driving, or setting up a truck for more dependable traction away from smooth tarmac.

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD/4WD

€31.49

Built for mixed-surface running, this 1:10 all-terrain wheel set combines a 90 mm diameter with a 2WD/4WD layout that suits a wide range of RC setups. The 4-piece configuration uses 2 front tyres and 2 rear tyres, creating a purposeful combination for models that need clear steering response at the front and stronger drive support at the rear when the surface changes from asphalt to loose ground. The front tyres measure 26 mm in width, while the rear tyres measure 43 mm, giving the set a staggered format that supports balanced handling under acceleration. Black and white rims add a clear competition-inspired look, and the tyres are professionally pre-glued to the rims for a clean fit straight from the pack. Integrated foam inserts help the tyres hold their shape during intensive driving manoeuvres, so the tread can work consistently as the model loads up in turns and over uneven sections. The wheel set is designed for 4 x 12 mm Tamiya hex mounts, making it a practical replacement set or a fresh running option for compatible chassis. On road, gravel, sand or grass, the all-round tread is aimed at drivers who switch between surfaces instead of tuning for only one. The set suits routine replacement after wear, but also works as a handling-focused update when a model needs broader traction coverage for everyday RC running.

RC combustion engines & glow plugs

1:10 BL Motor Dragster Turbo 2.0, motor

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 3200KV is a brushless drive unit created for electric RC vehicle projects with a clear focus on dragster-style power delivery. Its 3200KV specification points to a fast-revving motor character that suits straight-line acceleration setups and gives model-building enthusiasts a concrete tuning component for 1:10 platforms. As a standalone motor, this unit fits into workshop-based RC builds where the drive system is chosen part by part. The brushless layout makes it a relevant option for hobbyists comparing replacement motors or planning a fresh electric configuration around a defined KV value. The Turbo 2.0 naming gives the motor a distinct place within the range, while the 1:10 scale reference keeps the application tied to model car use rather than full-size electronics. No batteries are included. The age marking is 14 Years. On the bench, this motor suits rebuilds, performance-focused maintenance and targeted drivetrain changes in electric model cars. It also works well as a search-friendly option for enthusiasts narrowing a setup by scale, motor type and 3200KV specification before matching the rest of the electronics separately.  Warning! Not suitable for children under 14 years.

RC brushless motors

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a compact power package to RC vehicle builds with a sensorless 3200 kV motor and an electronic speed controller matched to hobby-grade running. In the chassis, the black finned motor layout and separate controller create a clean drive setup for fast acceleration and direct throttle response. The motor delivers a no-load speed of 24,420 RPM and approx. 390 W short-term output, with 53 A continuous current for sustained running. Its dimensions of 35.8 x 50 mm and a shaft diameter of 3.175 mm provide concrete fitting data for compatible installations, while the motor weight of 148 g and ESC weight of 80 g help when planning the balance of a 1:10 model. The controller is designed for 7.4 V operation and works with 2S LiPo or 6-cell NiMH battery packs. Forward, brake and reverse functions are built into the ESC, and the T-Plug connector forms part of the power connection. This set suits RC car projects that need a coordinated motor and controller combination rather than separate component sourcing. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, brushless set

€59.99

The 1:10 Dragster Turbo 2.0 brushless set brings a matched drive upgrade to electric RC models with a 2000 kV sensorless motor and a 60 A electronic speed controller. This 2-part combination is built for hobby setups that need clear throttle delivery, compact installation and a defined power package in one box. The motor measures 35.8 x 50 mm, uses a 3.175 mm shaft and weighs 148 g, making it a concrete fit option for many 1:10 chassis layouts where motor space and shaft size matter during planning. Its no-load speed reaches 15,170 RPM, while short-term output is rated at approx. 236 W for lively response when the drivetrain comes under load. The ESC adds 80 g, handles 60 A continuously and up to 360 A peak, and manages forward, brake and reverse functions through a sensorless brushless system. Power supply compatibility covers 2S LiPo and 6-cell NiMH packs, with a T-Plug connector already specified. This set suits rebuilds, replacement projects and performance-focused electronics swaps in 1:10 electric vehicles. Included are the Dragster Turbo 60 A speed controller, the brushless motor and instructions, giving model-building enthusiasts a clearly defined basis for a fresh drive configuration.  Warning! Not suitable for children under 14 years.

RC electric motors & controllers

1:10 Dragster Turbo 2.0, motor, 2600KV

€34.99

The 1:10 BL Motor Dragster Turbo 2.0 2600KV is a brushless drive component for electric model vehicle setups, centered on a 2600KV motor specification and a format matched to 1:10 applications. As a dedicated replacement or upgrade part, it brings the drive system back into service with a clearly defined motor unit for workshop benches, rebuilds and running repairs. Within a powered vehicle setup, the motor sits at the heart of the drivetrain, making the KV rating a key reference point when matching the unit to the existing electronics and the intended running character. The product data identifies this version specifically as the Dragster Turbo 2.0 motor, which keeps the designation clear when replacing a worn unit or sourcing the correct spare for an existing model. Because this is a component rather than a complete vehicle, the focus stays on fit within an electric model system and on the practical value of having the correct motor type ready for maintenance. The 14 Years age marking is stated in the product data. On the workbench, this kind of motor suits planned repairs, drive refreshes and parts-led tuning sessions where a named 1:10 brushless unit is the required starting point for getting a model back on track.  Warning! Not suitable for children under 14 years.

RC servos

1:10 KO RSx4S-one10X, servo, low profile

€124.99

The KO RSx4S-one10X is a 1:10 low-profile servo shaped for compact RC chassis where installation height and steering packaging need careful control. Its metal gear layout and the stated 11.8 V specification place it firmly in performance-focused electronics setups, giving model-building enthusiasts a concrete steering component for advanced builds. The low-profile housing suits layouts where body clearance, linkage position and surrounding electronics leave little spare room. In that context, the 0.10-second speed figure supports fast steering response when direction changes need to happen with little delay. The servo format also makes it relevant for 1:10 on-road and competition-style configurations that rely on tidy component placement rather than oversized hardware. As an electronic control component, it belongs in a build where the steering system, power supply and chassis geometry are chosen as a matched package. On the bench, the compact form helps when planning a clean electronics layout around the steering area. Once installed in a compatible 1:10 model, the combination of low-profile dimensions, metal gears and high-voltage operation supports focused tuning for precise handling response.  Warning! Not suitable for children under 14 years.

RC cars

1:10 Night Racer 2.0, RC car, 2.4GHz RTR

€74.99

The Night Racer 2.0 brings low-slung on-road styling and ready-to-run RC action into one focused 1:10 setup, with a 2.4 GHz control system and a top speed of 20 km/h shaping fast laps on smooth ground. At 485 mm long, 200 mm wide and 125 mm high, the body cuts a sharp racing silhouette that stands out in motion and under evening light. A 260 mm wheelbase and a weight of 737 g give the chassis a balanced footprint for quick steering inputs and stable tracking through linked corners. The differential transmission helps the driven axle work cleanly when the car changes direction, while the suspension layout keeps the wheels in contact over uneven patches and transitions. The included 7.4 V 1200 mAh Li-Ion drive battery supports up to 40 minutes of driving time, and the USB charger keeps the running gear simple to prepare between sessions. Detailed paintwork adds a finished motorsport look, and the blue illuminated rim design sharpens the visual effect once the light drops. On a driveway, in a car park or across a smooth indoor surface, the RTR setup gets the car moving with the supplied remote control system and included transmitter batteries. The compact racing profile, quick response and illuminated wheel styling suit short speed runs, repeated corner practice and evening cruising alike.

RC tires & rims

1:10 Wheel Set XL, RC wheels, 4WD 12 mm hex

€34.49

Large-diameter wheels can change both the look and the handling of an RC build, and this 1:10 4WD wheel set XL does exactly that with 4 complete wheels in black and white. The 105 mm diameter and 65 mm width create a noticeably larger footprint that suits rougher ground and gives the chassis a more assertive visual presence. Inside each tyre, foam inserts are matched to the construction so the rubber is supported under load instead of folding over or rolling at speed. That internal support helps the tread stay more stable through acceleration, direction changes and uneven sections, which can make the model feel calmer and more predictable in motion. The set is built around 12 mm hex mounting, a widely used format that allows straightforward installation on matching wheel hubs. Compatibility is stated for Tamiya hex mounts, making the set a practical option for many established 1:10 4WD platforms. On loose surfaces such as sand or grass, the XL dimensions can help the model carry momentum with a broader contact area. On firmer ground, the same wheel size gives the chassis a fuller, more aggressive stance that changes the overall character of the build without altering the core layout.

RC Crawler

1:10 X-Crawlee Pro 3.0, RC crawler, 100% RTR

€249.99

The 1:10 X-Crawlee Pro 3.0 brings crawler driving into a 43.5 cm format built for rough ground, with a 270 mm width, 235 mm height and a weight of 2280 g that gives the model a planted stance on the trail. Its 100% RTR setup puts the focus on driving from the first session, while the 2.4 GHz remote control system keeps control inputs clear and direct. Power comes from the included 7.2 V NiMH drive battery with 1800 mAh, charged via the included 7.2 V / 1 A USB charger. At full capacity, driving time reaches up to 70 minutes, giving longer runs across stones, dirt tracks and uneven paths without frequent charging breaks. The controller is compatible with NiMH and LiPo batteries, which broadens battery choice for later setup changes. Full ball bearings support efficient running through the drivetrain, while the suspended rigid axles give the crawler the axle movement needed for slow, technical sections. The ready-to-run set includes the model, the radio system, the drive battery, the USB charger, 4 AA transmitter batteries and the manual. With a 14 years+ age marking and a single-vehicle setup, the X-Crawlee Pro 3.0 suits focused crawling sessions where line choice, throttle control and steering precision shape every climb.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Ryken, RC buggy, 100% RTR 4WD

€199.99

The 1:10 XS Ryken brings fast off-road running into a compact RTR format, pairing a 550 brushed motor with permanent 4WD for direct launches and steady pull across mixed terrain. At 410 x 300 x 175 mm and 1741 g, the buggy carries a broad, planted stance that suits dirt tracks, gravel paths and uneven ground. Power reaches the wheels through hardened steel drive shafts and a central steel cardan shaft, while front and rear metal differentials with sealed steel bevel gears keep the drivetrain precise under load. A chassis mounted on ball bearings supports efficient running, and the splashproof housing and electronics keep light rain and wet ground from stopping the session. The rear wheelie function uses targeted torque and traction control to lift the front end under acceleration, adding a distinct driving character beyond straight-line speed. A rear spoiler and rollover cage complete the body with added protection for the shell and electronics during tip-overs. The 100% RTR setup arrives pre-assembled with a 2.4 GHz remote control system, a 7.4 V 2600 mAh drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. That makes the XS Ryken ready for immediate running on open ground, from compact backyard courses to rougher off-road stretches where grip, suspension travel and drivetrain control all come into play.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Ryken, RC car, 100% RTR 4WD blue

€199.99

The 1:10 XS Ryken brings off-road action into a 410 mm long RC car with a wide 300 mm stance, 175 mm height and a ready-to-run setup built for immediate driving. Its blue body sits over a layout tuned for rough ground, where the combination of 4WD and generous clearance gives the chassis the grip needed for loose tracks, uneven paths and dusty sections. Power comes from a 550 brushed motor paired with a 7.4 V 2600 mAh Li-Ion drive battery, delivering up to 40 km/h and around 12 minutes of driving time. The hardened steel drive shafts transfer power with minimal play, while the sealed steel differential gears support clean, direct drivetrain response when dirt and vibration build up. The integrated wheelie function adds a distinct handling character by managing torque and traction so the front end can rise under acceleration. Oil-damped suspension helps the car settle after bumps and keeps the tyres working across broken surfaces. As a 100% RTR model, the set includes the ready-to-run vehicle, a 2.4 GHz remote control system, the drive battery, a 1 A USB charger and 4x LR06/AA transmitter batteries. With a weight of 1741 g, the chassis carries enough presence for stable running on open ground, gravel stretches and wet outdoor surfaces where splashproof electronics matter.  Warning! Not suitable for children under 14 years.

RC truggies & RC monster trucks

1:10 XS Tekuro, RC car, 4WD 100% RTR

€199.99

The 1:10 XS Tekuro brings fast off-road driving into a 410 x 300 x 175 mm format with permanent 4WD, a high-torque 550 brushed motor and a top speed of up to 40 km/h. Grey and green bodywork, 110 mm monster tyres and a raised stance give the model a strong trail-ready presence before the first run even starts. Its drivetrain is built around a central steel cardan shaft, reinforced steel drive shafts at the front and rear, and metal differentials with steel bevel gears on both axles. Ball-bearing mounting throughout supports efficient running, while the XT60 high-voltage plug system and quick-change battery holder simplify battery swaps between sessions. The 8 kg steering servo uses a metal gearbox and water-protected construction, matched with splash-protected electronics and a water-protected 2.4 GHz radio system. The included 2600 mAh 7.4 V Li-Ion battery supports about 15 minutes of driving time, and the complete RTR setup keeps preparation focused on charging and heading out. At 1741 g, the chassis has the planted feel needed for dirt paths, gravel sections and uneven ground. Tight turns, short bursts of acceleration and repeated launch attempts all suit the Tekuro's mix of traction, suspension travel and wheelie-ready rear setup.  Warning! Not suitable for children under 14 years.

Models & trailers

1:12 MB Unimog U300, RC truck, 100% RTR

€199.99

The MB Unimog U300 has long been known as a compact utility truck with strong off-road credentials, and this 1:12 RC version carries that working character into a fire brigade layout with covered rear bed, roof beacons and front LED lighting. At 450 mm long, 220 mm wide and 260 mm high, the model brings a substantial road presence while staying manageable for regular driving sessions. The fully assembled chassis is ready to run with a powerful electric motor, digital proportional control and a 2.4 GHz remote control unit. Steering and throttle inputs can be adjusted progressively, which gives the truck a more controlled feel than simple on or off commands when lining up turns or easing over rougher ground. The included 7.4 V 850 mAh Li-Ion drive battery supplies up to 60 minutes of driving time, and a USB charger is part of the set. Horn and motor sound can be triggered from the transmitter, adding another layer of interaction during runs. With a vehicle weight of 2052 g, the model has enough substance to suit its utility-truck character. Fire brigade markings, the covered cargo area and the upright Unimog proportions make this RC truck fit naturally into rescue-themed driving scenes, yard layouts or obstacle courses with gravel, paving and mixed surfaces. The included transmitter batteries complete the 100% RTR setup, so the model can head straight into its first run after charging.

Basic accessories

1:14 2-Axle Boxed Trailer, model kit

€589.99

A 2-axle box trailer is a familiar sight in road freight, built to carry cargo in a closed body while keeping the load protected on the move. This 1:14 model kit brings that transport format into a detailed build with a laser-cut steel frame, a box body with CNC-milled aluminum parts, and the long, clean proportions of an enclosed trailer behind a tractor unit. The chassis uses 3 mm and 1 mm steel, while the bogie is formed from sheet steel in a sandwich structure. Wide chromated wheels run on ball bearings and carry wide tyres, and steel underride protection sits on the left and right sides. At the rear, an 8 mm aluminum bumper adds another machined metal detail, and a 1:14 trailer splash guard completes the lower section. The body measures 545 mm in length, 195 mm in width, and 290 mm in height, with a total weight of 4,800 g. Assembly is required, with a stated assembly time of 600 minutes. In use, the rear loading door opens on aluminum hinges through 270°, and magnets handle the door locking. Coupled behind a suitable 1:14 tractor unit, the enclosed body suits scale logistics scenes, articulated truck displays, and workshop builds that focus on metal construction, moving parts, and realistic trailer proportions. The kit includes instructions.

Models & trailers

1:14 2-Axle Dump Semi-Trailer, trailer

€589.99

Built in 1:14 scale, this 2-axle dump semi-trailer brings the look of a full-size tipper into a model-building format with a rigid PVC body, a CNC-milled aluminum frame and a 4-wheel layout. The silver dump body, black chassis and raised front platform create the working profile of a road-going bulk trailer, whether coupled to a tractor unit or parked on its support legs. The assembly kit focuses on mechanical detail rather than simplified styling. Vertical body panel lines, mudguards, rear underrun protection and ladder elements give the trailer a technical finish, while the king pin can be adjusted to suit the setup. The chassis uses new axles with 8 mm lift, and the rear section is shaped around a mechanically unlocking tailgate for realistic unloading action when a tipping function is installed separately. 7-chamber taillights and dummy air spring details extend the scale appearance across the rear and underside, and the ball-bearing wheel setup supports smooth movement during handling. On a workshop shelf, in a truck yard scene or behind a matching 1:14 tractor, the semi-trailer adds a strong construction-transport theme with visible engineering throughout the frame and body. Assembly kit and manual are included. A spindle drive, motor, battery, switch, radio gear, a charger and paints are required separately for expanded functions and finishing.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-Axle Dump Trailer, trailer kit

€519.99

The 1:14 2-Axle Dump Trailer brings working tipper style into a scale truck setup with a tandem-axle layout, a gray rigid PVC dump body and a steel profile frame with laser-cut, laser-welded construction. Built as an assembly kit, it focuses on the mechanical character of a real dump trailer, from the drawbar and support leg to the rear gate area and underbody linkage. The chassis uses 8 ball bearings across the wheel setup, giving the running gear a more precise feel as the trailer rolls behind a compatible tractor unit. Fulda Variotonn wide offroad tyres and the trailer axle with air ride dummy push the model further toward commercial-vehicle realism, while the 7-section tail lights add a recognisable rear-end detail. The automatic back wall locking with 2-hook design gives the rear section a functional finish that matches the tipper concept. The support leg keeps the trailer upright when detached, and the drawbar with hitch eyelet completes the classic central-axle trailer layout seen in heavy haulage scenes. On the bench, the kit offers a focused build around frame, axle and body assembly. Once finished, the trailer suits construction, transport and unloading scenes in 1:14 scale layouts, whether parked as a standalone model or coupled into a larger truck combination. Age 14 Years. Spindle drive, gear box motor, a control switch and paints are required separately.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-Axle Material Trailer, trailer kit

€574.99

Built for 1:14 truck scenes, the 2-Axle Material Trailer brings a long loading bed, twin-axle layout and working drop-side bodywork into a scale transport build with a clear commercial look. The grey panel sides, dark front bulkhead and wood-look floor give the trailer the character of a real material hauler, whether it is coupled behind a road tractor or parked at a loading point. The kit structure goes beyond a simple rolling chassis. The assembly sequence includes 2 axle units, a pivoted bogie, a main frame with crossmembers, mudguards, underride protection, rear bumper parts and upright posts around the bed. Ball bearings are fitted into each wheel hub, and the axle geometry offers normal height or a +8 mm position during assembly. Rear light housings are part of the build, and the manual also shows optional LED taillight boards as separate accessories. A spare wheel holder and additional fittings are listed as optional accessories rather than included contents. Once assembled, the trailer suits realistic loading and transport layouts in 1:14 scale, from building-material scenes to depot and yard setups. The opening side panels and rear section support a more active display style, while the detailed underframe, mudflaps and side protection parts give the finished trailer convincing presence from low viewing angles.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 2-axle Riedler, stanchion trailer

€509.99

The 1:14 2-axle Riedler stanchion trailer brings timber-haul detail into a scale transport setup with a steel sandwich frame, solid aluminium stanchions and a long, purposeful silhouette. At 620 x 190 x 305 mm and 2,600 g, the trailer adds real presence to a model road train while reflecting the look of the full-size Riedler vehicle named in the licence. Its mainframe uses 3 mm and 1 mm sheet steel parts that are laser cut and CNC bent, and the bogie follows the same sandwich construction for a consistent mechanical layout. The mounted bogie is adjustable and uses sliding pads to support manoeuvring through tighter course sections. A one-piece drawbar in fibre-reinforced plastic carries a chequer plate application and is held at a coupling height of 75 mm by 2 springs. The semitrailer axle includes dummy pneumatic springs, while the left and right underride guards and the CNC-milled rear bumper add further metal detail. The stanchion holders can be loosened with 2 grub screws, then repositioned or removed to suit different loading arrangements for logs or other long cargo. Ball-bearing mounted chromium wheels with wide tyres, mudguard splash protection, bumper mud flaps, a licence plate holder and 7-compartment rear lights build up the finished transport character. A decoration set is included. Age 14 Years. The Carson towing coupling 500907182 is required separately for use on the TAMIYA Volvo FH16 tractor unit.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 20Ft. Sea-Container, kit, trailer load

€199.99

Freight containers shaped modern transport with a standardised form built for road, rail and port handling. This 1:14 20Ft. Sea-Container Kit brings that familiar cargo silhouette into a scale truck setup with a 432 mm length, 180 mm width and 185 mm height. The structure combines an anodised silver aluminium frame with plastic sheet body sections that reproduce the look of a traditional container. Corrugated surfaces, corner details and the separate frame layout give the model the character of a working freight load rather than a plain box shape. The plastic panels are paintable, which supports custom liveries, fleet styling or a weathered finish that matches a chosen tractor unit and trailer combination. At the rear, the doors are movable and fitted with a locking mechanism, so the handling detail is part of the build rather than only a visual effect. The container is designed for the 2 axle container semi-trailer 500907334 and locks to the chassis via twist-locks. That mounting method reflects the technical logic of full-size container transport and helps the model sit naturally in logistics, harbour or long-haul display scenes. 14 Years marks the recommended age.

Models & trailers

1:14 20Ft. Semitrailer, trailer kit, tandem axle

€274.99

Built around a 1:14 scale layout, the 20Ft. Semitrailer kit brings container transport style into a detailed truck setup with a black anodised aluminium frame and a compact tandem-axle format. The 475 mm long chassis creates a clear, purposeful silhouette behind a tractor unit, while the 180 mm width and 135 mm height keep the proportions aligned with scale road-haulage scenes. The running gear combines swing axle suspension with flat springs, giving the underframe a more technical, model-engineered character than a plain static trailer base. Tyres with foam inserts add substance to the wheel setup and support a fuller tyre shape on the rims. Mechanical seat posts strengthen the parked semitrailer look at the front section and add another visible chassis detail for display or workshop scenes. The open kit format also leaves room for a container-focused build concept rather than fixing the trailer to a single body style from the outset. Coupled to a matching truck, the semitrailer suits freight yard layouts, road transport displays and scale driving sessions built around container handling themes. A suitable lamp set, 300056502, is available for builders who want to extend the trailer with matching light equipment. Age 14 Years

Models & trailers

1:14 3-Axle Flatbed Trailer III, trailer

€539.99

Heavy transport takes shape in 1:14 scale with the 3-Axle Flatbed Trailer III, a detailed kit built to pair with TAMIYA tractors. The long platform, solid front wall and multi-axle layout give the model the look of a working road trailer ready for oversized loads, machinery or palletised cargo. The chassis uses a laser-cut steel frame in 3 mm and 1 mm material, supported by a massive aluminium front wall and steel underride protection on the left and right sides. A bumper made from 8 mm aluminium adds another strong visual and structural element at the rear. The loading area measures 981 mm in length, with an overall width of 195 mm and height of 210 mm, giving the trailer a notably long deck in this scale. At 4,400 g, the assembled model carries a substantial presence on display and in convoy scenes. The new trailer suspension can be built at normal height or with the included +8 mm elevation, adding flexibility to the finished stance. The real wood deck surface and recessed fastening points suit scale freight setups, from construction loads to industrial transport scenes. Ball-bearing wheels support smooth rolling movement, while the spare wheel mounted in its steel holder strengthens the authentic commercial-trailer look. Age 14+ marks the recommended age. The trailer can also be expanded with separately available accessories, including a conversion kit with functional aluminium side walls for building-material transport.

Models & trailers

1:14 3-Axle Fliegl Megarunner, trailer kit

€634.99

Curtain-side trailers shape the look of modern road freight, and the 1:14 3-Axle Fliegl Megarunner brings that transport character into a detailed model-building project. The assembly kit captures the long, low stance of a European semi-trailer with a 995 mm length, a 195 mm height and a red curtain body that stands out clearly beside the white front and rear sections. The build centres on a laser-cut steel frame, steel front wall and 3-axle layout, creating a technical structure with the layered detail that model-building enthusiasts look for in workshop sessions. Along the sides, the curtain body is tensioned with multiple fasteners, while the rear section uses opening doors with a 270° hinge layout for a more authentic trailer finish. Half-round mudguards, a single-arm steel spare wheel carrier and aluminium underride protection add the kind of hardware normally seen underneath full-size transport equipment. The rear bumper carries a laser-cut Fliegl logo, and the wide tyres with chromed rims complete the road-going stance with a bright contrast against the darker chassis parts. On a shelf, in a depot scene or coupled to a 1:14 tractor unit, the trailer adds a strong logistics presence through its triple-axle proportions and curtain-side bodywork. The kit format makes the construction itself part of the appeal, with the manual included for step-by-step assembly.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Low Loader, trailer, gooseneck

€849.99

Heavy-haul trailers are defined by their proportions, and this 1:14 3-axle low loader captures that look with a long low-bed platform, a stepped gooseneck front section and a rear triple-axle group. The red frame, wood-look centre deck and black running strips create the technical contrast seen on full-size transport equipment, whether the trailer is coupled to a matching tractor unit or shown as a standalone workshop build. The construction goes beyond a simple shell. The manual shows 6 wheel assemblies with ball bearings, a multi-part frame with cross members in 74 mm and 81 mm lengths, and deck sections that lock into place across the chassis. Rear details such as warning boards, mudflaps, lights, hazard markings and LONG VEHICLE graphics build the road-going character of the model. The trailer also supports optional upgrades including a spindle drive gearbox motor, a control switch for the lifting mechanism, LED tail light boards, rectangular lights and an orange flashing beacon. On a finished 1:14 truck combination, the low central bed suits scale transport scenes with construction machines, agricultural vehicles or other oversized loads. The long deck and realistic rear section also make the model a strong centrepiece for shelf display, depot layouts and heavy-transport dioramas. Required separately are a gearbox motor for the lifting device and a control switch for manual lifting.  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Semi-Trailer Ver.III, trailer

€689.99

The 1:14 3-Axle Semi-Trailer Ver.III recreates the long, enclosed form of a box trailer with a white body, red chassis and a detailed 3-axle layout that gives a truck combination a convincing road-going presence. Extended support legs at the front let the trailer stand detached, while the wide rear opening sets up loading scenes with the doors swung fully outward. Details across the chassis and body focus on the hardware that defines a working trailer. The side panels use a screwed sandwich-look construction, and the semi-circular mudguards frame the rear wheel area with a clean commercial-vehicle profile. At the back, an aluminum rear bumper carries 7-section taillights for a technical finish that matches the transport theme. A steel spare wheel holder with spare wheel adds another workshop-style detail to the underframe, and the manually adjustable aluminum trailer support legs underline the functional character of the model. Combined with a compatible 1:14 tractor unit, the trailer suits realistic freight setups, depot scenes and road-train display builds. Open rear doors, visible cargo space and the multi-axle chassis also make it a strong centrepiece for transport layouts focused on loading bays, yard parking and long-haul combinations. Age 14 years+  Warning! Not suitable for children under 14 years.

Models & trailers

1:14 3-Axle Stanchion Trailer, logging trailer

€599.99

Built around a 1:14 scale and a 3-axle layout, this stanchion trailer brings the look of a dedicated timber hauler into a detailed model format. The red chassis, silver stanchions and black fenders create the unmistakable profile of a forestry transport trailer, with the long frame set up to carry elongated loads such as logs or poles in a convincing road-going arrangement. The structure develops through a multi-stage build with 6 wheel assemblies, ball bearings in the wheel hubs and 3 axle units mounted beneath the frame. The suspension uses a new design, and the axle build includes a choice between normal height and a raised +8 mm position. Dummy air suspension details add another layer of scale realism around the running gear. Side underrun guards, a rear bumper, rear light details and a front holder with front plate shape the trailer into a complete heavy-transport subject rather than a simple rolling chassis. On the bench or coupled into a 1:14 truck setup, the trailer suits display scenes centered on forestry, construction or long-load transport. Support legs hold the trailer upright when parked, while the front bulkhead and paired stanchions define the loading zones clearly for a purposeful finished look.

RC truck accessories

1:14 3-Chamber Taillight PCB, RC lighting set

€80.99

Compact rear lighting adds a sharper scale finish to 1:14 vehicle builds, and this 3-chamber taillight PCB set brings that detail into a small round format. With dimensions of 11 x 7.5 mm, the units suit model bodies and rear sections where lighting needs to stay visually balanced instead of overpowering the build. The PCB layout combines 3 light functions in each taillight: rear light, indicator and brake light. That function mix supports more lifelike signalling on trucks, trailers and custom conversions, while the round housing shape fits classic rear-end styling on many commercial vehicle projects. The set is designed for an input voltage of 7.2-12 V DC, making it suitable for RC electrical systems within that range. For model-building enthusiasts, this adds a focused electronics upgrade that contributes visible function as well as scale character. Installed on a 1:14 rig, the taillights help complete the rear view during workshop builds, restoration-style projects or detailed road-going truck scenes. The set is not compatible with TAMIYA MFC-01/03, so it is best matched with other suitable lighting layouts and custom electronics setups.

Models & trailers

1:14 3Axle Trailer Chassis Ver.III, trailer

€389.99

The 1:14 3Axle Trailer Chassis Ver.III captures the look of a heavy road trailer in a format shaped for model-building enthusiasts. Its laser-cut steel construction uses 3 mm and 1 mm sections, creating a rigid base chassis that suits custom builds and gives larger trailer bodies a defined structural foundation. The 3-axle layout brings the long proportions of a transport trailer into a scale setup that looks convincing behind a truck tractor. A new trailer suspension system is part of the chassis design, and the included +8 mm elevation option allows the running height to be adapted to the planned structure above. Wide chromed wheels with ball bearings and wide tyres underline the technical look while supporting smooth rolling movement. At the rear, an aluminium bumper with 7-section taillights adds another recognisable truck detail. The steel spare wheel holder with spare wheel extends the workshop-style equipment, while the semi-circular mudguards shape the wheel area with a clean trailer silhouette. As a basic trailer chassis for individual structures, this version leaves room for flatbed, transport or specialist body concepts built around the frame. On a shelf, in a workshop setting or coupled to a matching 1:14 tractor unit, the long red chassis and detailed under-run protection create a strong heavy-haul presence.

Additional accessories

1:14 Box Body Conversion Kit, model kit

€399.99

This 1:14 box body conversion kit reshapes the TAMIYA Volvo FH16 timber truck 300056360 into an articulated truck with a closed cargo body. CNC-milled aluminium parts form the main box structure, while the combination of metal sections and panelled surfaces gives the finished build a purposeful commercial-truck character. A sheet steel subframe, laser cut and CNC bent, is included for mounting on the chassis and creates the structural link between the conversion and the base vehicle. The side sections use screwed plastic panels in a sandwich layout, which adds visible layering to the bodywork instead of a plain flat-sided shell. At the rear, the loading doors are carried on aluminium hinges with a 270° opening angle, allowing the opening mechanism to be shown clearly on the completed model. Magnetic locking keeps the doors closed when the body is in running or display condition. The assembled body measures 545 x 195 x 195 mm and weighs 3,200 g. As a model kit, this conversion suits hobby builds that focus on reworking an existing truck into a different transport configuration. The box body changes the visual character of the Volvo FH16 from timber hauler to enclosed freight carrier and adds a substantial new body section for workshop assembly and finishing.

RC truck accessories

1:14 Chrome Bumper MB 1838/1850, truck part

€12.49

Classic truck styling often comes down to the front details, and this 1:14 Chrome Bumper MB 1838/1850 adds a bright plated accent to compatible model builds. Designed as an accessory for Mercedes Benz truck models 56305 and 56307 from Tamiya, it brings the specified MB 1838/1850 look to the front section in a format matched to 1:14 scale projects. The bumper is made from chromed material and focuses on exterior appearance rather than a generic replacement look. Its shaped front profile and integrated mounting points are intended for the named compatible truck models, which keeps the fitment use clearly defined in the product data. The included fixing hardware consists of 2 black screws, giving the set the essential parts needed for installation. As a model accessory in the Models Supplies range, it suits detail-focused truck projects where the front end finish plays a visible role in the overall build. On a workshop bench, the plated surface adds contrast against painted cab parts and darker chassis components. In a display setting or as part of an active RC truck build, the bumper helps complete the characteristic road-truck appearance associated with the MB 1838/1850 designation.

RC chassis & attachments

1:14 Clearance Lights, model accessory, 2 pcs

€11.49

Marker lights are a small detail with a big visual role on scale trucks, and this 1:14 clearance light set brings that road-going look into a model build with red and amber lenses. The set contains 2 pieces and is listed as a model accessory for hobby use. Its compact format suits detailing work where edge markers help define the outline of a cab, body or trailer in scale form. The red and amber colour combination follows the stated design and creates a clearer visual break between body panels and fitted trim. As a separate accessory, the set can support a fresh build, a repair, or the replacement of existing marker parts where the original look needs to be restored. The 1:14 scale keeps the proportions aligned with matching model projects rather than forcing an oversized lighting detail into the build. On the bench, the set fits naturally into finishing stages where small exterior parts shape the final appearance. In display use, the coloured markers add another layer of realism to trucks and trailers that rely on visible body details rather than large mechanical changes alone.

RC truck accessories

1:14 Clearance Lights, model accessory, 2pcs

€11.49

Marker lights are a small detail with a strong effect on the finished look of a scale vehicle, and this 1:14 clearance light set brings that effect into model builds with a red and white 2-piece layout. The compact format suits focused detailing work on truck and trailer bodies where visible light points help define the lines of the model. The set is listed as a model accessory and is aimed at hobbyists from 14 years. Red and white light elements open up classic placement options on body edges, upper sections or rearward areas, depending on the build concept and the styling of the vehicle. Because the pack contains 2 pieces, the set works well for selective upgrades rather than broad full-body outfitting. That makes it a useful choice for custom projects, replacement work or finishing touches on a scale body that still needs clearly placed marker-light details. On the workbench, the accessory can be integrated into truck, trailer or other 1:14 modelling projects where small exterior parts shape the overall impression. In display use or during driving sessions, the added light housings help the bodywork read with more scale definition and a more complete road-going look.

RC truck accessories

1:14 Day Running Light Actros 2/3 Axle

€65.99

The MB Actros remains one of the defining shapes in modern long-haul trucking, and this 1:14 daytime running light set brings that road-going character into a scale build with a model-specific front lighting detail. Made for MB Actros 2/3 Axle models, the set focuses on the visual signature at the front end and adds a cleaner, more technical look to the truck body. The accessory is designed as a paired lighting set with wired left and right units, matching the mirrored layout needed for the vehicle front. Its 7.2 to 12 V/DC input range gives clear electrical guidance for integration into compatible RC truck systems. The compact housings are shaped for installation as dedicated light components rather than as generic decoration, which makes the set especially relevant for builders refining the appearance of an existing model or replacing front lighting parts with the correct format. On a workshop bench, during a rebuild, or as part of a scale detailing session, this lighting set adds a focused upgrade to the MB Actros 2/3 Axle platform. It suits display-oriented finishing as well as active RC truck projects where the front-end layout matters as much as the driving setup.