Tyres & rims

14: Fulda EcoControl Tire (2)drive axles

€26.49

500907014 - the 1:14 Fulda EcoControl drive tires (2) give your truck the realistic appearance of original Fulda road tires. Hollow chamber tires, Ø 82 mm, width 20 mm, inner diameter 44 mm. Especially for drive axles: low rolling resistance and high traction, also suitable for steering axles. Suitable for TAMIYA tractors and TAMIYA/CARSON trailers. Suitable inserts: 500907516.

Electronics

15x10mm Orange Flashing Light w/ E.(2)

€79.99

The Carson rotating beacon 15×10 mm (500907125) in a set of two gives models an authentic warning light: two orange lights, base Ø 14.5 mm, height 15 mm, swivels up to 5°. Four bulbs flashing in series create the all-round effect; SMD flashing electronics via a free receiver channel. Ready-to-connect circuit board with heat-shrink tubing and Graupner J/RF cable; ideal for roof mounting on cabs and trailers.

Electronics

1:14 12V LED-PCB 7-Section taillight

€57.99

500907388 1:14 12V 7-chamber LED board offers model building enthusiasts a precise, paired rear light upgrade (left and right) for 1:14 models. With SMD LEDs, common positive pole and approx. 250 mm cable length, it implements four functions: Blinker, tail light, brake light and reversing light. Suitable for item 500907037; rear light not included; not compatible with TAMIYA MFC.

Electronics

1:14 12V Roof lamp (2) SMD LED PCB

€14.49

Carson 1:14 SMD LED roof light boards Art. 500907399 bring authentic lighting accents to your 1:14 scale model. The set contains two 12-volt circuit boards, each with a white SMD LED and integrated series resistor. Compact Ø 8 mm circuit boards with 200 mm connection cable, suitable for roof and front lamp brackets and ideal for upgrading details or as a spare part.

Basic accessories

1:14 2-Axle Boxed Trailer

€589.99

The Carson 500907731 1:14 2-axle box trailer is a kit for model builders, supplied as a complete set with instructions. At 1:14 scale, the model offers authentic proportions; assembly is required and takes around 600 minutes, making the project particularly suitable for patient hobbyists who appreciate construction and detail work.

Basic accessories

1:14 3+1-section (2) Trailer Taillight

€15.99

Carson 1:14 3+1-chamber tail lights (item no. 500907261) are universally applicable, true-to-scale tail lights in 1:14 format, supplied as a set of 2 for universal trailers. They offer model builders a practical solution for enhancing the appearance of trailers and achieving authentic attention to detail.

Basic accessories

1:14 4-section (2) Trailer Taillight

€15.99

1:14 4-chamber trailer tail lights (item no. 500907262) from Carson are a set of two universal tail lights for 1:14 scale models and trailers. The four chambers create a realistic appearance and make the parts the ideal choice for retrofitting, repair and visual enhancement in model making.

Electronics

1:14 7,2-14V Trailer side-marker oran.

€34.99

The Carson 500907382 1:14 marker light orange (7.2-12V) offers model builders compact, reliable side markers for trailers. Made of plastic with glued-in SMD LED, dimensions 8×4×1.2 mm and collar Ø3.2×2 mm, cable length approx. 200 mm. In the set: 2 lights and 2 resistors - ideal for detailed retrofitting.

Electronics

1:14 7,2/12V Angle Eyes blue Hella bl(2)

€52.99

Carson 1:14 7.2/12V Angle Eyes Hella (item no. 500907571) provide authentic lighting for your model: black auxiliary headlights with Angel Eyes and two light functions; parking light ring blue, high beam white. 5 mm mounting. Two sets are supplied with housings, blue and clear lenses, reflectors, circuit boards, diode, mounting material and instructions. Licensed Hella quality for detail-loving model builders.

Electronics

1:14 7,2/12V Angle Eyes blue Hella ch(2)

€52.99

Carson 1:14 Hella Angle Eyes 500907572 are shiny chrome auxiliary headlights for 7.2/12 V - perfect for detail-loving model builders. The Angel Eyes offer two light functions: blue parking light ring and white high beam; 5 mm mounting bracket. The package contains two sets with housings, blue and clear lenses, reflectors, circuit boards, diode, mounting material and instructions. Licensed by Hella.

Electronics

1:14 7,2/12V Angle Eyes blue SMD LED PCB

€34.49

Carson 500907554 1:14 Angel Eyes blue SMD LED board brings show lighting to the model and appeals to model building enthusiasts. The circuit board for 7.2 and 12 V offers two light functions: blue parking light ring and white high beam. Fits roof light brackets and auxiliary headlights. Included in delivery: 2 circuit boards (200 mm cable), 2 reflectors, diode for 12 V and instructions.

Electronics

1:14 7,2/12V Angle Eyes whi. SMD LED PCB

€34.49

The Carson 500907555 - 1:14 LED board Angel Eyes white (7.2/12V) brings realistic lighting to your 1:14 scale model: Ideal for model building enthusiasts, SMD LEDs offer two functions, white parking light ring and white high beam, compatible with roof light brackets and additional headlights. Scope of delivery: 2 circuit boards with 200 mm cable, 2 reflectors, 1 diode for 12V and instructions.

Electronics

1:14 7,2/12V Angle Eyes white Hella bl(2

€52.99

The Carson 500907573, 1:14 7.2/12V Angle Eyes White from Hella, offers authentic additional lighting for your model. Two light functions with white parking light ring and high beam, suitable for 7.2 and 12 V, 5 mm mounting bracket. Two sets each with two black housings, blue and clear lenses, reflectors, circuit boards, diode, mounting material and instructions.

Electronics

1:14 7,2/12V Angle Eyes white Hella ch(2

€52.99

Carson 500907574 - 1:14 7.2/12V Angle Eyes in chrome combines original Hella design with two light functions: white parking light ring and white high beam, ideal for authentic retrofitting and show look on the model. Complete set with two sets (2 housings each, blue and clear lenses, reflectors, circuit boards, 1 diode), mounting material, instructions and 5 mm mounting point; licensed by Hella.

Electronics

1:14 7,2/12V LED Front-Winker VolvoFH16

€65.99

The LED front turn signal set 500907506 for Volvo FH16 on a scale of 1:14 is aimed at ambitious model builders with Tamiya vehicles. Operating voltage 7.2-12 V DC. The scope of delivery includes a set of indicators, mounting material and instructions. Note: not compatible with the TAMIYA MFC.   Warning! Not suitable for children under 14 years.

Electronics

1:14 7,2/12V LED-PCB Taillight Arocs Tip

€40.99

The Carson 500907616, 1:14 Arocs tipper tail light circuit board, is the LED PCB for true-to-original Arocs tippers in 1:14 scale and is supplied as a twin pack. The PCB operates at 7.2-12 V and offers indicators, driving lights, brake lights and reversing lights - perfect for detail-loving model builders who want realistic lighting functions.

Electronics

1:14 7,2/12V MB Side-marker LED Set (2)

€17.99

Carson 500907560 - 1:14 7.2/12V MB marker light set for model builders: Four LEDs (2 white roof lights, 2 orange side marker lights) with ~300 mm cable each, instructions included. Specially designed for TAMIYA MB Actros; not compatible with TAMIYA MFC. Ideal for realistic lighting and detail optimization on the 1:14 scale model.

Electronics

1:14 7,2/14V Volvo Headlight

€109.99

Carson 500907507 - 1:14 Volvo FH16 headlight circuit board (7.2-12 V) provides model builders with the striking V daytime running lights as well as indicators, parking lights, low beam and high beam. When switched off, the V-light shines at 100% and dims to 25% when dipped. Set left/right with housings, mounting material and colored wires (~250 mm). Not compatible with TAMIYA MFC-01/MFC-03; suitable for TAMIYA 300056360.

Electronics

1:14 7,2V LED-PCB 6-Section taillight

€57.99

The 1:14 7.2V 6-chamber LED board Carson 500907385 provides five light functions as a pair (left + right) with SMD LEDs and a common positive pole: Blinker, brake light, driving light + position light, reversing light and fog light. Cable length approx. 500 mm; suitable for item no. 500907038. Rear light not included. Not compatible with TAMIYA MFC.

Electronics

1:14 7,2V LED-PCB Arocs Headlight

€70.99

500907596 - 1:14 7.2V Arocs LED headlight board brings six realistic light functions for model building enthusiasts: indicators, side marker light with blinker effect, parking light, driving light, high beam and fog light. Suitable for TAMIYA MB Arocs. One set (left/right) with colored wires ~200 mm, mounting material and instructions; not compatible with TAMIYA MFC.

Electronics

1:14 7,2V LED-PCB MAN Headlight

€70.99

The Carson 1:14 7.2V MAN LED headlight circuit board (500907391) brings realistic lighting to the model: A set with one right and left circuit board each provides indicators, parking lights, fog lights, high beam, driving lights and cornering lights at 7.2 V. Perfectly matched to the TAMIYA MAN TGX; not compatible with the TAMIYA MFC.

Electronics

1:14 7,2V LED-PCB MAN Taillight

€35.99

The Carson 1:14 MAN LED tail light circuit board (500907389) with 7.2 V and 250 mm cable length provides realistic lighting for your model: four functions - indicators, brake light, tail light and reversing light - ensure authentic effects. One set contains one right and one left circuit board; suitable for TAMIYA MAN TGX. Not compatible with TAMIYA MFC.

Electronics

1:14 7,2V LED-PCB MB Headlight

€70.99

The 500907558 - 1:14 7.2V MB LED headlight board for Carson offers six light functions: front turn signal, side marker light with turn signal effect (the turn signal lights up brighter than the marker light), parking light, driving light, high beam and fog light. Colored wires approx. 200 mm, set left/right with mounting and instructions. Suitable for TAMIYA MB Actros, not compatible with TAMIYA MFC.

Truck & trailer accessories

1:14 7,2V SMD-LED orange (2)

€10.29

Carson 1:14 7.2V SMD LED orange (2), material number 500907397, is a set of two orange SMD LEDs for 1:14 scale models with a rated voltage of 7.2 V. This set is aimed at model builders who are looking for matching, color-coordinated lighting components for their 1:14 scale models. The set contains two orange SMD LEDs with 7.2 V.

Electronics

1:14 7,2V SMD-LED white (2)

€9.99

Carson 1:14 SMD LED 7.2V white (2) (500907396) provides model building enthusiasts with brilliant, realistic lighting for 1:14 models and enables precise retrofitting. The tiny SMD chips (1.4×1.4 mm) are equipped with approx. 250 mm cables, 220 Ω resistors and instructions. Two LEDs with cables and two resistors offer universal, easy-to-install replacements for detailed conversions.

Basic accessories

1:14 Air Horn-Set long/short chr.brass

€29.49

The 1:14 truck fanfare set 500907096 from Carson combines a long and a short fanfare made of nickel-plated brass and appeals to model builders who value fine features. The set contains all the necessary mounting parts as well as a drilling template for precise, clean installation on the model.

Basic accessories

1:14 Air Horn-Set MB Actros chrom.brass

€39.99

500907161 - 1:14 Air Horn Set MB Actros chrome.brass: Two chrome-plated aluminum truck fanfares in 1:14 scale, which can be installed 1:1 instead of the plastic fanfares included in the kit. For model builders who rely on the original look and metal parts, it offers a precise replacement, authentic appearance and robust workmanship.

Basic accessories

1:14 Air-suspen. bellow hard (2) 20x18mm

€6.99

500907358 - Carson 1:14 air bellows hard (2) 20×18mm is the robust solution for demanding model builders. Molded from hard rubber, the bellows are particularly suitable for heavy models; diameter 20 mm, height 18 mm. The two parts supplied can be easily replaced and improve stability and resilience.

Basic accessories

1:14 Air-suspen. bellow soft (2) 20x18mm

€6.99

The 1:14 soft air suspension bellows 20×18 mm (500907357) from Carson provide gentle damping for model builders who love detail. Made from injection-molded rubber, the bellows measure 20 mm in diameter and 18 mm in height; two pieces are supplied. Ideal for lightweight models up to 5 kg, easy to fit and durable.

Basic accessories

1:14 Alloy Front Knuckel Arms (2)

€37.99

Carson 1:14 front axle aluminum wheel axles, item 500530913 (2 pieces), are high-quality 1:14 scale aluminum front axle components. Designed as an original replacement or upgrade for your 1:14 scale models, they offer precise geometry and an accurate fit for exact wheel alignment - ideal for model building enthusiasts.

Basic accessories

1:14 Alu stow case f. wood plank GH TU4

€55.99

500907449 - 1:14 aluminum storage compartment with wooden planks for the Goldhofer TU4 low-loader combines a true-to-scale look with sophisticated functionality for model builders who love detail. The aluminum storage compartment is suitable for the low loader (500907400); the wooden planks can be attached on the outside to accommodate extra-wide vehicles. The storage compartment and wooden planks are supplied.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Alum. 2-Speed shift gearbox Compact

€199.99

500907265 - 1:14 aluminum 2-speed gearbox Compact from Carson is a compact, CNC-milled aluminum gearbox (without motor) for TAMIYA 1:14 2- and 3-axle chassis. Hardened steel gears, five-fold ball bearings, 5 mm output shaft, gear ratios 1:11.3 and 1:5.666 as well as aluminum motor mounts for 540 motors ensure robust performance; shifting via micro servo, shift servo and motor not included.

Basic accessories

1:14 Alum. 2-Speed Transfer-gearbox

€249.99

500907266: The 1:14 aluminum 2-speed transfer case from Carson turns TAMIYA 2- and 3-axle models into real all-wheel drive models. CNC housing, hardened steel gears, 7x ball bearings, 5 mm output shaft and self-locking longitudinal differential ensure traction. Two gears, micro servo, simple assembly. Note: Remove battery holder, 7.2 V drive battery in the cab.

Basic accessories

1:14 Alum. 2/3Axle Mainplate/Batt.Hold.

€69.99

Carson 500907593 - 1:14 aluminum base plate for 2/3 axles with integrated battery holder, developed for demanding model builders. It replaces the standard battery holder and relocates the battery into the driver's cab, which remains tiltable after the conversion. Suitable for all Tamiya 2/3-axle Euro tractor units (except Mercedes-Benz Arocs 300056352). The bracket 500907584 is required to mount the tanks.

Basic accessories

1:14 Alum. Arocs Cab locking device

€37.49

1:14 scale aluminum cab lock MB Arocs (500907590) from Carson combines a detailed look with a robust aluminum design and reliably replaces the split pin of the TAMIYA Mercedes-Benz Arocs cab. This scale replacement part increases the authenticity and functionality of your model and is aimed at demanding RC model builders.

Basic accessories

1:14 Alum. Arocs Mainplate/Batt.Hold.

€69.99

The Carson 500907591 1:14 aluminum Arocs base plate with battery holder enhances your model emotionally and offers clear technical advantages. Suitable only for Mercedes-Benz Arocs 300056352, it replaces the kit holder and relocates the battery into the cab, which remains tiltable after the conversion. The 500907584 holder is required for tanks.

Basic accessories

1:14 Alum. Cylinder mount GH (2)

€46.99

Carson 1:14 scale aluminum cylinder brackets 500907476 (GH 907060) are reinforced aluminum brackets that replace the standard plastic brackets in the kit. Tailor-made for precise mounting in 1:14 scale, they provide increased stability and durability. Two brackets are supplied for easy retrofitting.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Alum. Driver Cab locking device

€38.99

1:14 aluminum cab lock (500907156) is the true-to-original, aluminum solution for the detailed locking of TAMIYA trucks in 1:14 scale. The robust unit replaces the split pin, is supplied with bracket and small parts and can be mounted on European, tiltable tractors via existing frame holes. Not suitable for MB Arocs (300056352).

Tyres & rims

1:14 Alum. Fr. narrow wheel (2)dri.axle

€74.99

The 1:14 aluminum rim narrow 500907272 from Carson is a high-quality round hole set for the driven front axle. Aluminum in 10-hole Euro design, 12 mm hexagonal driver, dimensions Ø49×21 mm, approx. 57 g/each. Includes 2 rims, 20 decorative bolts, 2 hub caps and fitting instructions; suitable for the front axle 500907267. For easy fitting of the stud bolts we recommend socket wrenches 500907595.

Tyres & rims

1:14 Alum. Fr. wide wheel (2)driv. axle

€74.99

500907278 1:14 aluminum rims set wide for driven front axle combines 10-hole Euro design with 12 mm hexagon. Dimensions 49×28 mm, approx. 65 g per rim. Included in delivery: 2 rims, 20 decorative screws, 2 hub caps and fitting instructions. Fits the driven front axle 500907267; compatible with TAMIYA 300056528/309808176 and CARSON 500907012/500907612; socket wrench 500907595 recommended.

Tyres & rims

1:14 Alum. Fr. wide wheel Longh. (2) Hex

€74.99

Carson 1:14 aluminum rim long hole wide (500907412) combines an elegant finish with robust precision for demanding model builders. The wide aluminum rim has a 12 mm hexagon socket and is designed for the driven front axle 500907267. The set includes two rims, two hub covers, 20 chrome nuts, 20 stud bolts and instructions.

Basic accessories

1:14 Alum. Frame Tamiya 2x1m (undrilled)

€24.49

The 1:14 Tamiya aluminum frame profile 2×1 m (500907063) is an undrilled, two-piece set made of drawn, bright aluminum with rounded edges - ideal for precise chassis conversions in 1:14 scale. Height 21 mm, width 7 mm, material thickness 1.5 mm, length 1 m each. Robust, precise fit and flexible use for demanding model builders.

Tyres & rims

1:14 Alum. Front wheel wide/round h. (2)

€75.99

500907159 1:14 aluminum front wheel rim wide in round hole design from Carson combines an authentic look with robust aluminum quality for model building enthusiasts. The set includes two rims and two hub caps that cover the fixing stop nut. Mounting for two ball bearings 5×11×4 mm; can also be used as a trailer rim with wheel bolt set 500907158.

Basic accessories

1:14 Alum. Fuel Tank mount (2)

€18.99

Carson 500907584 - 1:14 tank holder set (2) for MB Arocs combines precise function with robust design: Two aluminum holders (left/right) including all mounting material enable the secure attachment of tanks and exhaust system to the frame. Note for TAMIYA models: The battery holder must be removed when using the 2-speed transfer case.

Tyres & rims

1:14 Alum. Low Loader Twin-Wheel Set (2)

€50.99

The 1:14 aluminum twin wheels 500907136 from Carson are a twin-wheel set (2) made of aluminum for 1:14 scale models. Suitable for the Goldhofer 500907060 low-loader, they offer a true-to-scale addition or replacement solution for your low-loader and appeal specifically to model making enthusiasts. Ideal for repairs and completing details.

Basic accessories

1:14 Alum. Ramp hinge GH (2)

€30.99

500907475 - 1:14 aluminum ramp hinge GH (2) from Carson is the reinforced aluminum version that replaces the plastic hinges included in the kit. For model builders, it offers increased stability, precise fit and long durability; two ramp hinges are supplied, suitable for 1:14 scale models.   Warning! Not suitable for children under 14 years.

Tyres & rims

1:14 Alum. Rear wheel long hole (2) hex

€114.99

Carson 500907352 - 1:14 aluminum wheel set rear axle slotted hole (2) combines precision and appearance for demanding model builders. Includes: two double rims, aluminum hubs with 12 mm hexagon socket, two hub covers, 20 chrome nuts, 20 stud bolts and instructions. Assembly aid: socket wrench 500907595. Suitable for Tamiya 300056527/309805456 and Carson 500907014/500907011.

Tyres & rims

1:14 Alum. Rear wheel round hole (2)

€114.99

The 1:14 scale aluminum rear wheel rims round hole 500907160 from Carson combine 10-hole Euro design with aluminum construction and 12 mm hexagonal drivers. 49×21 mm, approx. 68 g per double rim. Set with double rims, adapter, decorative screws, hub caps and instructions. Suitable for rear axle 500907268; installation with socket wrench 500907595 recommended; compatible with tires such as 300056527 and 500907011.

Basic accessories

1:14 Alum. Trailer bumper rear

€24.99

The Carson 1:14 aluminum bumper for semi-trailers (item no. 500907361) is a milled aluminum Euro semi-trailer bumper that gives your model an authentic look and precise fit. Designed for a frame width of 96 mm, it can be combined with the 7-chamber rear lights (500907037) and the license plate holder (500907034). Scope of delivery: 1 piece.

Basic accessories

1:14 Alum. Trailer Coupling SAF (MFC)

€99.99

500907155 1:14 aluminum fifth wheel SAF (MFC) from Carson gives your Tamiya truck extra detail: officially licensed by SAF Holland, made of aluminum, fits as a 1:1 replacement on all TAMIYA trucks in 1:14 scale. Easy assembly, prepared for MFC-01/MFC-03 microswitch for coupling sound; incl. subframe, sliding pad, spring and small parts.

Basic accessories

1:14 Alum. Trailer support legs (2) 73mm

€40.99

The 500907375 1:14 aluminum trailer supports (set, 2 pieces, 73 mm) offer model builders robust, precise supports for detailed trailers. Housing (15×15×73 mm) made of aluminum with two M3 fastening holes, steel plunger (Ø8×62 mm) with clamping screw and aluminum base (Ø19×3.5 mm). Retracted 76.5 mm, extended 114 mm.

Tyres & rims

1:14 Alum. Trailer Wheel (2) long hole

€63.99

500907350 - 1:14 aluminum trailer rims in slotted hole design for detail-loving model builders: two wide turned aluminum rims with decorative screws, plastic cover caps and two ball bearing seats each (5x11x4 mm). Suitable for all Carson trailers. Scope of delivery: 2 rims, 2 covers, 20 chrome nuts, 20 stud bolts, instructions. We recommend socket wrenches 500907595 for assembly.

Basic accessories

1:14 Alum. Transfer-gearbox Tipper 6x6

€169.99

500907610 - 1:14 aluminum transfer case for tipper 6x6 combines solid construction with a precise 3:1 transmission ratio and a self-locking longitudinal differential. Specially designed for the 300056357 rear tipper, it offers model builders a durable, precision-fit solution for powerful torque distribution on a 1:14 scale.

Basic accessories

1:14 Alum. Underrun protection Trac.

€34.49

500907181 - 1:14 scale aluminum underride guard construction site for 2-/3-axle trucks: Solid aluminum guard protects the rear lights and mudguards of the tractor unit during tough off-road use. The bracket is attached to the rear cross member with four screws, the three-part cover is screwed together; paintable and suitable for all TAMIYA 2- and 3-axle EU tractor units, supplied with two aluminum brackets and three-part protection.

Basic accessories

1:14 Alum. Warning sign w/decal

€29.99

Carson 500907448 - 1:14 aluminum warning signs with decoration offer detail-loving model builders high-quality aluminum signs for low loaders and trailers. The set contains two aluminum plates with integrated holder, warning decal and fastening screws, impresses with its robust material and simple installation for precise retrofitting.

Tyres & rims

1:14 Alum. Wheels f. Carson Trailer (2)

€67.99

500907040 1:14 aluminum rims for CARSON trailers give your model a real motorsport look and robust running smoothness. The wide rims (Ø49 mm, width 27.5 mm) are designed for two 5x11x4 ball bearings and are supplied as a set of two with 20 decorative screws, 2 wheel hub caps and assembly instructions. Suitable for trailer axle with air suspension dummies 500907069 as well as for wide Tamiya and CARSON tires.

Basic accessories

1:14 Alum./Steel Univer.Drive Shaft Set

€33.99

500907004 1:14 aluminum/steel universal drive shaft kit - robust drive shaft solution for model builders who demand performance and precision. The 112 mm long shaft can be cut to length and used flexibly; two drive bones and two drivers are supplied, ideal for individual adjustments and long-lasting use.

Basic accessories

1:14 Auxiliary head lamp (2)

€15.79

1:14 auxiliary headlights 500907052 - Two precision-manufactured headlights for mounting on a 5 mm lamp bracket, supplied with a total of two blue and two white lenses (transparent and blue glass inserts). For 1:14 scale model builders, they offer a detailed look and easy mounting on the lamp bracket.

Basic accessories

1:14 Auxiliary head lamp (2) 4mm mount

€14.99

The Carson 1:14 roof light set (500907575) for 4 mm brackets in a set of 2 is the ideal upgrade for detail-loving model builders. The chrome-plated plastic housings each contain a white and a blue glass plus mounting material and can be illuminated with bulbs/LEDs or the LED boards 500907184 (7.2V) or 500907399 (12V).

Basic accessories

1:14 Control platform Dump trailer

€63.99

500907365 1:14 Dump truck control stand set from Carson is a precise 1:14 scale accessory for model builders. The kit made of milled hard PVC plate (gray) contains parts to be cut out, sanded, glued and painted. Dimensions W153 × H135 × D≈70 mm, suitable for frame width 96 mm. Complete set with fixing material and assembly instructions.

Basic accessories

1:14 Driven Front axle w/Auto-Diff.-Lock

€234.99

The Carson 500907267 1:14 driven front axle with Auto-Diff-Lock transforms Tamiya tractors into all-wheel drive models and locks automatically in the event of loss of traction without additional shift servos. Reinforced plastic housing, CNC aluminum steering knuckle, hardened steel bevel gears, 16-way ball joint, 1:2.66 gear ratio, 44×160×33 mm, ~175 g. Installation kit 500907280 required.

Basic accessories

1:14 Driver Figure "John"

€24.99

500907426 - 1:14 scale driver figure "John" from Carson is a pre-painted truck figure that can be placed in any sitting or driving position thanks to its movable limbs and can sit in the driver's seat or as a passenger. Supplied true to scale for 1:14 models, John is ready for immediate use. Other figures: 500907427, 500907186.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Euro-Pallet-Set (4) Plastic

€8.99

Carson 1:14 plastic Euro pallets (500907094) in a set of 4 combine a detailed look with practical size. Each 1:14 scale pallet measures 93 × 62 × 14 mm; the visually outstanding plastic parts provide reliable accessories for demanding model builders and add lasting value to your scenes.

Basic accessories

1:14 Euro-Pallet-Set (5) Plastic/Beige

€7.79

The 1:14 plastic Euro pallet set 500907049 in beige comprises five finely detailed pallets and is aimed at model builders looking for authentic loading equipment in 1:14 scale. The pallets match TAMIYA trucks, CARSON trailers and other model trucks in this scale, can be seamlessly integrated and visually enhance any loading area.

Basic accessories

1:14 Fahrerfigur "Robert"

€9.99

Carson 500907186 - the 1:14 scale driver figure "Robert" is a ready-to-use, pre-painted and immobile detail figure, ideal as a driver or co-driver in truck models. True-to-scale proportions and high-quality paintwork bring authenticity to the cockpit, ensure a realistic look and uncomplicated installation.

Electronics

1:14 Flashing Light Set (2) LED 13 Prog.

€119.99

The Carson rotating beacon set 500907214 on a scale of 1:14 provides realistic signals: two ready-to-install rotating beacons, each with seven super-bright SMD LEDs, 13 programs (6 rotation modes, 7 strobe modes) and memory function for two settings. Control via 3-pos switching channel, swivel ±5°, operation 4.5-6.0 V; incl. mounting material, set of lenses, instructions; licensed by HELLA.

Electronics

1:14 Flashing Light Set (2) MB Arocs

€119.99

The 1:14 MB Arocs rotating beacon set, item 500907604, provides realistic light signals for model makers: Two HELLA-licensed lights (height 22 mm, aluminum base Ø17 mm, glass Ø11 mm) with approx. 350 mm 3-pin cable and uni-plug. 13 programs (6 all-round/7 strobe) at original speed, memory for 2 settings, operation 4.5-6.0 V, control via 3-pos. plug.

Basic accessories

1:14 Flatbed Alum. Underride Guard 190mm

€39.99

Carson 500907078 - 1:14 aluminum underride guard 190 mm for flatbed trailer is a true-to-scale replacement and detail part for demanding model builders. Made of aluminum and exactly 190 mm long, it complements the appearance of your 1:14 trailer and is compatible with the TAMIYA flatbed trailer (item no. 56306).

Basic accessories

1:14 Frame cover MB Arocs/Actros 3A

€63.99

The 1:14 MB Arocs/Actros 3A frame cover (Carson 500907598) is a targeted solution for model builders: designed for TAMIYA 3-axle Mercedes-Benz Actros and Arocs, it enables detailed retrofitting or repair in 1:14 scale. A high-quality spare part for authentic bodywork on the model.

Basic accessories

1:14 Frame Cover Panels 2-Axle

€84.99

The 500907180 1:14 2-axle frame cover from Carson enhances 1:14 scale chassis and appeals to detail-oriented model builders. Made from 0.8 mm VA tear plate, cut-outs for saddle plate control and MFC-01 are indicated and can be removed if required. All edges are already pre-bent.

Basic accessories

1:14 Frame Cover Panels 3-Axle

€92.99

Carson 1:14 3-axle frame cover (500907255) is a perfectly fitting addition for TAMIYA 3-axle Euro trucks from MAN and SCANIA. The detailed covers maintain the 1:14 scale, enhance the appearance of your model and are ideal as spare parts or for sophisticated tuning in model making.

Tyres & rims

1:14 Fulda Crossforce Off-Road Tires (2)

€26.49

Carson 1:14 Fulda Crossforce off-road tires - item 500907011 (2 pieces) deliver superior off-road performance for your 1:14 model as heavy-duty high-performance tires. The flexible hollow-chamber design ensures optimum traction; suitable for original Tamiya rims. Dimensions: Ø83 mm, width 21 mm, inner diameter 44 mm. Tire insert 15 mm (500907516) separate.

Tyres & rims

1:14 Fulda Multitonn 2 Tire wide (2)

€26.49

500907012: 1:14 Fulda Multitonn 2 wide tires (2) offer flexible high-performance hollow-chamber tires for optimum traction and long service life on a 1:14 model scale. With Ø83 mm, width 27 mm and inner diameter 44 mm, they provide robust grip; content 2 pieces. Compatible with front axle rim 500907013, trailer rim 500907026; matching tire inserts 500907517.

Tyres & rims

1:14 Fulda Variotonn Off-Road Tires (2)

€26.99

The Carson 500907612 1:14 Fulda Variotonn off-road tires (2) are heavy-duty high-performance tires for predominantly off-road use and therefore the first choice for demanding model builders. The hollow-chamber design provides optimum traction; dimensions ø81×29 mm, inner diameter 44 mm. Suitable for original Tamiya rims. Tire insert 20 mm (500907517) compatible. Suitable rear tire: 500907011.

Basic accessories

1:14 King Pin Steel fit. Tamiya

€7.99

Carson 1:14 kingpin 500907362 made of oxidized steel for Tamiya is aimed at model building enthusiasts who demand precise, durable spare parts. With enclosed fixing screw and compatible with all Tamiya trucks, the dimensions Ø11 mm, collar Ø6.5 mm, height 10 mm guarantee reliable fitting accuracy and robust axle function.

Electronics

1:14 LED Flashing Light (1) oran. Swiv.

€58.99

The Carson 500907580 1:14 SMD rotating beacon in orange brings a professional look to the model roof. It offers 7 orange SMD LEDs, 13 selectable programs (6 all-round, 7 flash functions) at 4.5-13.5 V and can be swiveled ±5° for roof mounting. Aluminum housing, four interchangeable lenses, total height approx. 22 mm, cable 250 mm. Incl. mounting and instructions. Licensed by Hella.

Electronics

1:14 LED Flashing Light (1) oran. Uprig.

€53.99

Carson 500907579 - 1:14 SMD rotating beacon in orange for vertical mounting brings a realistic flashing effect to the model. Hella-licensed, with 7 orange SMD LEDs, 13 selectable programs (6 rotating, 7 flashing), aluminum housing and four interchangeable lenses. Height approx. 28mm, Ø12mm, cable 250mm. Scope of delivery: light, 4 lenses, mounting and instructions.

Basic accessories

1:14 Lifted-Suspension Kit +8mm 2A.T.T

€34.99

500907452 1:14 Lifted-Suspension Kit +8mm 2A.T.T immediately gives your model more presence and off-road capability: The vehicle ground clearance of 2-axle Euro tractors increases by 8 mm. The set matches the axles included in the kit and the Carson drive concept with self-locking axles, is easy to install and is supplied as a set.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Lifted-Suspension Kit +8mm 3A.T.T

€42.99

500907618 - 1:14 Carson +8mm (3A.T.T) height adjustment set gives your model noticeably more terrain variability: Compatible with TAMIYA rear tippers and all 3-axle Euro tractors, it increases the ground clearance by 8 mm. Compatible with the axles included in the kit and the Carson drive concept with self-locking axles, for demanding model builders.

Electronics

1:14 Light case clear (2) universal

€26.49

Carson 1:14 clear light housings (500907256) provide model builders with two universal clear glass housings, each with an LED board (operating voltage 7.2V=). With dimensions of 12×7×5 mm, they fit 1:14 models true to scale and are ideal as additional lights, for example for SCANIA radiator grilles; 2 housings and 2 circuit boards are included in the scope of delivery.

Basic accessories

1:14 Low Loader Axle Goldhofer/SAF

€76.99

The 1:14 Goldhofer low-loader axle (500907140) with air suspension dummies is a ready-to-install solution for the Goldhofer BAU STN-L3 low-loader semi-trailer (suitable for 500907060) or your own construction. Glass fiber reinforced plastic parts, aluminum axle and steel wheel bolts offer high robustness. Track width 190 mm, axle Ø 5 mm, frame width 76 mm. Kit with mounting parts and instructions.

Tyres & rims

1:14 Lowloader Tire-set (4)

€26.49

Carson 1:14 low-loader tires Fulda Ecotonn (item no. 500907583) offer an authentic profile and precise fit for your Goldhofer® model or self-build in a set of four. With outer Ø 58 mm, inner Ø 28 mm and 15 mm width, they fit Goldhofer Bau STN-L3 (500907060), TU-4 and the tire/rim set 500907141; ideal with aluminum double rim 500907136.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 MAN TGX XLX Fro.Bumper Light Holder

€46.99

Carson 500907124 - 1:14 bumper lamp bracket for MAN TGX XLX combines a classy look with robust function. As a front bracket on the Tamiya MAN TGX or as a rear wall bracket for two work lights (for Tamiya trucks), the set includes a nickel-plated brass bracket, two chrome headlights with clear and blue lenses, mounting parts, instructions and a self-adhesive drilling template; can be illuminated with bulbs or LEDs.

Basic accessories

1:14 MAN TGX XLX Top Light Holder

€89.99

500907095 - the 1:14 scale roof lamp bracket for the MAN TGX XLX enhances your TAMIYA truck with an individual look. Made of brass, nickel-plated and highly polished, the long version is a real gem for the cab. The headlights are mounted individually and can be illuminated, ideal for detail-loving model builders.

Basic accessories

1:14 MB Actros Gigasp. Top Light Holder

€96.99

1:14 MB Actros Gigaspace (500907134) roof light bracket enhances your Tamiya Actros: bent solid brass, hard chrome-plated with chrome-plated headlights. Includes bracket, four sets of headlights, two lenses (clear/clear-blue), mounting accessories and instructions. Dimensions 100×130 mm, expandable to six lights; compatible with 300056335,300056342,300056348,300056354; matching LED boards available.

Basic accessories

1:14 MB Arcos Top Light Holder

€71.99

1:14 MB Arocs roof lamp bracket 500907599: This precisely fitting plastic roof rack enhances the cab of the TAMIYA Mercedes-Benz Arocs and gives it a realistic look. The scope of delivery includes a roof bracket, four headlight housings and mounting material; four rear work lights can be retrofitted as an option (500907144 for 7.2V or 500907578 for 12V), ideal for model builders.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Mounting Set Front Drive Axle

€75.99

1:14 installation set for driven front axle (500907280) from Carson provides model builders with all the parts for clean installation on TAMIYA frames: two stainless steel leaf spring packs, mounting material, steel servo holder and steering linkage. Precisely manufactured for stable steering and resilient driving characteristics in 1:14 scale.

Basic accessories

1:14 Mud Guard-Set Dump trai.(quart.)(4)

€21.49

The 500907068 mudguard set from Carson for 1:14 scale bodies is a set of four quarter mudguards, four brackets and mounting material and also fits 1:16 trailers. With dimensions of 76 x 35 mm and a bracket length of 39 mm, the set fits in perfectly and enables a clean look and easy mounting on trailers. Ideal for model builders looking for details true to the original.

Basic accessories

1:14 Pallet with Ceresit CM90 Easy

€21.99

The Carson 500907617 1:14 Euro pallet with Ceresit CM90 Easy presents itself as a detailed building material load for demanding model builders. Licensed stamping, the shrink-wrapped Ceresit CM 90 EasyFlex PLUS and the compact dimensions 83×55×85 mm at 185 g make it a high-quality diorama and replacement load (1 piece).

Basic accessories

1:14 Pallet with Wuerth-Packings

€23.99

1:14 Euro pallet with WÜRTH equipment (500907620) is an original licensed load in 1:14 scale for model builders with a love of detail. The WÜRTH packaging is shrink-wrapped, pallet and load bear licensed stamps. Dimensions 83×55×85 mm, weight 185 g; scope of delivery: 1 piece. Ideal for realistic loading of models.

Basic accessories

1:14 Plast. parts Trailersus. w/8mm lift

€29.99

The Carson 500907644 1:14 plastic parts for trailer axles with 8 mm lift are a carefully designed retrofit set for model builders with the existing air suspension dummy axle 500907069. The set contains all the necessary plastic parts and two air bellows; metal parts and mounting material from the existing axle are reused, one set is required per trailer axle.

Basic accessories

1:14 Rear Axle w/ Diff.-Lock&fixed drive

€199.99

The 1:14 rear axle 500907268 from Carson transforms TAMIYA 2/3-axle cars into powerful all-wheel drive vehicles: self-locking differential that automatically provides traction without the need for a shift servo or Bowden cables. Scope of delivery: pre-assembled diff, both drive shafts and housing cover. Reinforced plastic housing, 12 ball bearings, ratio 1:2.66. Intermediate shaft 500907169 is required for two axles in 3-axle vehicles.

Basic accessories

1:14 Rear Bumper (Euro) TAM-Semi-Trailer

€79.99

Carson Euro bumper 1:14 for TAMIYA semi-trailers (material number 500907074) is milled from solid aluminum and quickly replaces the original bumper. Includes underride guard, 7-chamber rear lights, two bumpers and license plate holder. Fits TAMIYA 300056302/300056306/300056310; retrofit lighting: 500907071 or 500907387/500907388. A must for scale purists.

Basic accessories

1:14 Rear Bumper (Euro) TAM-Tank-Trailer

€89.99

The 1:14 Euro bumper (material number 500907083) for TAMIYA tank trailers is milled from solid aluminum and combines precision with a robust look. Replacement is quick: remove the original and fit the new one. Scope of delivery: Underride guard, 7-chamber rear lights, two bumpers, license plate holder; retrofittable LED boards (7.2V/12V) and splash guard set 500907183.

Basic accessories

1:14 Rear Bumper (Euro)T-Reefer Semi-Tr.

€89.99

Carson 500907075 1:14 Euro rear bumper for Tamiya trailers 300056319, milled from solid aluminum, quickly replaces the original bumper. 7-chamber rear lights can be connected; lighting kit 500907071 required for Tamiya multifunctional unit (or circuit boards 500907387 for 7.2V / 500907388 for 12V). Scope of delivery: aluminum bumper with underride guard, 7-chamber rear lights, 2 buffers, license plate holder.

Basic accessories

1:14 Reduction Gear Unit 4:1

€48.99

500013517 - 1:14 reduction gear set 4:1 provides model building enthusiasts with noticeably more torque for their Tamiya tractors. Lightweight plastic housing with ball-bearing metal gears ensures long-lasting, smooth running. The 4:1 reduction ratio optimizes power transmission; fits all Tamiya tractors except Globe Liner 56304 and requires a suitable universal joint.

Basic accessories

1:14 Scania R470/R620 Bumper Light Hold.

€82.99

Carson 1:14 lamp bracket bumper Scania R470/R620 (500907065) is a highly polished, nickel-plated brass bracket that gives your 1:14 Scania a realistic chrome shine. The molded headlights can be illuminated and provide an authentic look - the ideal choice for model builders who appreciate attention to detail and robustness.

Basic accessories

1:14 Scania R470/R620 Top Light Holder

€82.99

The 1:14 Scania R470/R620 (500907064) roof lamp bracket from Carson adds brilliant accents to your 1:14 scale model: made of nickel-plated brass, highly polished, with molded-on, illuminated headlights. A precise, authentic detail for realistic truck displays and individual upgrades.

Basic accessories

1:14 Seat with mounting bracket

€8.49

Carson 1:14 seat with console (500907359) is aimed at discerning model builders who are looking for interior details that are true to the original. Made from plastic, the three-part seat for the 1:14 scale has a height of 65 mm and a width of 35 mm; one piece is included in the scope of delivery, including a bracket for attachment.

Basic accessories

1:14 Servo Mount 2-Speed Gearbox

€32.49

Carson 1:14 servo mount 2-speed gearbox (500907287) offers model builders the precise mount and linkage for the Compact 2-speed gearbox (item no. 500907265) when installed in TAMIYA trucks with original cab base plate. Made of aluminum, it comes with shift linkages, mounting material and assembly instructions for a precise, durable retrofit.

Electronics

1:14 SMD LED Dachlampenplat. 7,2V (2)

€14.49

Carson 1:14 SMD LED roof light board 500907184 (7.2 V, 2 pieces) gives your model precise, powerful lighting. The board-equipped SMD LEDs are specially designed for 1:14 scale and are compatible with roof light brackets, bumper brackets and auxiliary headlights - including 50907052, 500907064, 500907076, 500907065 and 500907124 - ideal for ambitious model builders.

Basic accessories

1:14 Speed-up spindl.dri. shaft f. 56545

€40.99

500907611: Carson 1:14 tuning spindle shaft for 56545 is a precise tuning part for model builders that has been specially designed for 1:14 models. The spindle increases the lifting speed by approx. 25% and is suitable for 300056545 ACU-01. If you are looking for more speed and direct response when lifting, this is a reliable, targeted increase in performance.

Basic accessories

1:14 Steel Grab handle (2) Low loa. ramp

€14.49

The 500907374 1:14 steel holding bars for low-loader ramps come in a pack of two and are made of black oxidized steel. Specially adapted to the Carson Goldhofer 500907060, they give your model an authentic look and reliable grip points when loading and unloading - a small, high-quality detail for discerning model builders.

Basic accessories

1:14 Sticker Truck Ornamental Strip

€22.49

The Carson 1:14 truck decal sheet (500907085) offers model builders a self-adhesive solution for realistically enhancing 1:14/1:16 trucks. The A4 sheet on transparent backing film contains decorative strips, various slogans and logos and is suitable for many TAMIYA trucks and trailers. Easy to apply for an authentic look.

Basic accessories

1:14 Sticker-Sheet Truck Caution-Signs

€22.49

500907086 - 1:14 decal sheet truck warning symbols: This DIN A4 decal sheet on transparent backing film gives your 1:14/1:16 model trucks realistic details. The self-adhesive sheet contains numerous warning signs, freely designable license plates with letters and numbers, 16 country codes and other logos - ideal for TAMIYA tractors and trailers, perfect for the finishing touches.

Basic accessories

1:14 SW 3mm Socket Wrench Steel

€8.69

Carson socket wrench 500907595 is a 1:14 SW 3mm tool made of steel that makes it easier for model building enthusiasts to precisely mount aluminum rims and trim and driver screw connections. With wrench size M3 and one piece included in the scope of delivery, it offers secure, precise fastening for your 1:14 scale models.

Basic accessories

1:14 TAM 3-Speed-Gear Hi-Torque Upgr.Kit

€23.99

The 500907115 torque set for 1:14 truck transmissions offers model building enthusiasts noticeably more power: The smaller motor pinion increases the torque by around 20 %, while the top speed is reduced accordingly. The scope of delivery includes an 8-tooth motor pinion and the matching gearbox end plate, ideal for targeted performance upgrades.

Basic accessories

1:14 Tension belt dummy (10) Curtainside

€11.29

Carson 500907143 1:14 Tensioning strap dummies for tarpaulin trailers (10) offer model builders precisely fitting spare parts. Plastic dummy tensioning straps, dimensions 37×8×3 mm; the two-part parts are pressed onto the trailer tarpaulin and then attached to the frame. Contains 10 dummies and 10 fastening washers; suitable for 500907235 Fliegl Megarunner tarpaulin.

Tyres & rims

1:14 Tire insert 15mm 907011/14

€11.49

Carson 1:14 Tire Insert 500907516 is a 15 mm wide set of 2 medium-strength cellular rubber that keeps truck tires in shape and provides additional stability. For model building enthusiasts, it improves walking behavior and traction on the road and off-road depending on the load and fits TAMIYA tractors, trailers and narrow Carson tires 500907011/500907014.

Tyres & rims

1:14 Tire insert 20mm 907012/907612

€11.79

Carson 1:14 tire insert 20 mm (500907517) made of medium-strength cellular rubber keeps truck tires in shape and provides additional stability. The two inserts (20 mm) improve flexing behavior and traction depending on the load and are suitable for TAMIYA tractors, trailers and Carson tires 500907012/500907612 and TAMIYA kit tires 300056528/309808176.

Tyres & rims

1:14 Tire/Wheel-Set LowLoad.Fulda/SAF(2)

€47.99

500907141 1:14 low-loader tire/rim set (2) gives model construction low-loaders a realistic look and reliable function. Suitable as a replacement for Goldhofer® Bau STN-L3 low-loader semitrailer (500907060), Goldhofer® TU-4 or for self-builds. Tires: Ø 58/28 mm, width 15 mm. In the set: 2 double rims with SAF hub caps, 4 Fuld Multitonn tires, 4 ball bearings (5×11×4). Fits the aluminum double rim 500907136.

Basic accessories

1:14 Towing bar Low loader (1) Plastic

€26.99

The drawbar 500907627 for 1:14 low loader TU4 is a one-piece part made of fiber-reinforced plastic (black) - ideal as a spare part or for DIY projects. Suitable for frame widths 50/72 mm, coupling bore 4.2 mm, mounting pin 3 mm, dimensions 130×77×24 mm. Compatible with Goldhofer TU4 (500907400) and towing jaw set 500907182.

Basic accessories

1:14 Towing bar Trailer (1) Plastic

€26.99

The 1:14 drawbar for trailers (500907626) is a one-piece, fiber-reinforced plastic solution for self-builds or as a spare part suitable for the models 500907622 and 500907624. With checker plate application, mounting bolt 3 mm, coupling hole 4.2 mm, for frame widths 72/90 mm and dimensions 180×96×6.5 mm, it offers a precise fit; recommended drawbar set: 500907182.

Basic accessories

1:14 Tr./Trail. Taillights 3-sec.rou.(2)

€19.49

Carson 500907039 1:14 3-chamber rear light (2 pieces) brings realistic lighting to the model: can be illuminated for tractors, trailers and semi-trailers on a scale of 1:14. Included in delivery are two round 3-chamber lights with aluminum housing and plastic lenses in red/yellow; outer Ø 11 mm, height 6 mm.

Basic accessories

1:14 Tractor Truck Taillights 6-sect.(2)

€19.49

Carson 500907038 1:14 scale 6-chamber rear lights for towing vehicles combine detailed design with practical function: As a two-piece set (2 pieces) in 1:14 scale, the lights can be illuminated and are ideal for retrofitting or restoring your model towing vehicle. Precisely manufactured for an authentic look and realistic operation.

Basic accessories

1:14 Trailer door hinge 270°(6)CAR.

€16.99

Carson 500907142 1:14 trailer door hinge 270° (6) provides model builders with six plastic hinges with brackets, 1 mm steel bolts and mounting screws. At 22×7×4 mm, they fit CARSON box and flatbed trailers (including 500907092 Ver.II), but not Fliegl Megarunner 500907235. Assembly: Screw on the holder, place the hinge on the bolts and fix with superglue.

Basic accessories

1:14 Trailer door locking set

€37.99

Locking set for trailers/containers 500907356 on a scale of 1:14 is a precise plastic set for retrofitting or repairing trailer and container doors. For model builders with a love of detail, it offers precisely fitting locks that fit unobtrusively into the model and restore functionality and authenticity.

Basic accessories

1:14 Trailer Fog- & Backup Light (1+1)

€18.99

Carson 1:14 semi-trailer fog & reversing light 500907077 is a compact double set for detail-loving model builders: A round side tail light and a round reversing light in 1:14 scale provide authentic rear optics. The set matches the round 3-chamber rear lights (item no. 907039) and rounds off detailed replicas.

Basic accessories

1:14 Trailer hitch with Pole RC/Mech.

€59.99

500907182 - 1:14 Drawbar with drawbar RC/Mechanical is a compact, robust coupling for all CARSON trailers in 1:14 scale. The locking mechanism can be operated mechanically or by remote control; when used manually, a strong counter spring prevents unintentional opening. The set includes drawbar, drawbar and mounting material. Fits Tamiya MB Arocs and Volvo FH16.

Basic accessories

1:14 Trailer License Plate brack./buffer

€13.49

The 500907034 Carson 1:14 trailer license plate holder with buffer is a high-quality detail part for model building enthusiasts. Two rubber buffers absorb shocks, the preparation for lighting allows realistic rear lights, mounting material is included. Fits vehicles and trailers on a scale of 1:14.5 and 1:16.

Basic accessories

1:14 Trailer Mud Guard (2) Plastic

€28.99

500907137 - 1:14 half-round mudguards (2) made of plastic: elegant, robust spare parts for model makers and tuning fans, also perfect for DIY projects. Dimensions 96 × 35 × 48 mm with 40 mm hole spacing. In the set: 2 mudguards, 4 steel spacer sleeves, mounting kit and mounting instructions. Fitted as standard on trailers 500907312, 500907216, 500907235 and 500907425.

Basic accessories

1:14 Trailer Splash guard Set

€30.99

500907183 1:14 splash guard set for CARSON trailers improves protection and visibility for following traffic and is ideal for retrofitting. All mounting components are included: the large splash guard is screwed to the bumper/rear underride guard, the two small mudguards are glued in the designated places with superglue. Suitable for trailers 500907030, 500907081, 500907082, 500907092 and Euro bumpers 500907074, 500907075 and 500907083.

Basic accessories

1:14 Trailer Taillights 7-sections (2)

€19.49

500907037: 1:14 7-chamber rear lights for trailers (2 pieces) bring realistic details to your models and increase their presence in scale. The latest rear lights fit all 1:14 and 1:16 scale trailers, measure 32×12×7 mm and are prepared for lighting - ideal for easy retrofitting and upgrading.

Basic accessories

1:14 Trailer Underride Guard 240mm Ta/Co

€41.99

The 1:14 scale aluminum underride guard 240 mm (500907079) is specially designed for model builders and fits tank and container trailers in 1:14 scale. Suitable for the Tamiya tank/container trailer, the 240 mm long aluminum part complements the rear view of your model, increases the level of detail and gives it a high-quality, authentic look.

Tyres & rims

1:14 Trailerwheel f. Tire wide Silver(2)

€17.49

The trailer rim 500907026 for 1:14 scale models in silver is a plastic rim that can be used to convert Tamiya trailers to single tires. Specially designed for the CARSON wide tire "Fulda" (500907012), Ø 49 mm, width 27.5 mm. Delivery: 2 pieces. Ideal for detail-loving model builders for conversion or as a spare part; silver look complements common trailer details.

Basic accessories

1:14 Traktor Truck fire drencher (1)

€8.99

Carson 500907123 - 1:14 truck fire extinguisher gives your truck the finishing touch and appeals to model builders who love detail. The 1:14 scale fire extinguisher can be universally mounted on models and trailers. It is supplied as a plastic kit including sticker and is intended for direct mounting on the model; height approx. 40.

Basic accessories

1:14 Truck Alum. Coupler Plate n. MFC

€53.99

Carson 1:14 truck aluminum fifth wheel 500530918 is the aluminum fifth wheel plate for demanding model builders: Suitable for all 1:14 scale TAMIYA trucks, it replaces the plastic fifth wheel plate with manual operation included in the kit. As a stable retrofit solution, it offers precise replacement and a high-quality look - ideal for hobby and ambitious model builders alike.

Tyres & rims

1:14 Truck Front Wheel wide Chrome (2)

€26.49

Carson 500907061 - 1:14 Truck front axle rim wide chrome (2) brings a striking shine and robust precision to your model. The chrome-plated plastic rims (Ø49 mm, width 27.5 mm) fit all Tamiya front axles and are designed for the Fulda wide tires (Art. 500907012). Scope of delivery: 2 pieces.

Tyres & rims

1:14 Truck Front Wheel wide gray (2) ABS

€17.49

Carson 1:14 front axle rim wide gray (500907013) combines high-quality ABS processing with precise shape for a convincing look and robust function. The silver plastic rim (2 pieces) measures 49 mm in diameter with a width of 27.5 mm, fits all front axles of TAMIYA trucks and is designed for the Fulda wide tire 500907012.

Basic accessories

1:14 Truck Lighting Parts and Bulbs

€8.79

500013512 - 1:14 truck additional light set specifically complements your scale models: The set for 1:14 trucks contains five additional lights and is suitable for all TAMIYA trucks. Specially designed for model builders, it provides authentic lighting accents and expands the equipment options for your 1:14 scale truck.

Basic accessories

1:14 Truck Mirror & Horn Set

€8.79

Carson 1:14 Truck Horn and Mirror Set (500013513) is a well thought-out accessory package for dedicated model builders who want to give their 1:14 truck additional character and fine details. Suitable for all TAMIYA trucks, the set includes two horns and two exterior mirrors and opens up numerous options for customizing your model and adding striking accents.

Basic accessories

1:14 Truck Steering Rod, steel (1)optim.

€8.49

500013516 1:14 truck tie rod made of steel - optimized for increased steering angle and precise steering. This robust spare part improves the handling of your 1:14 tractor unit and fits TAMIYA Mercedes-Benz models (300056305, 300056307) and the Volvo FH 12 (300056312). Scope of delivery: 1 piece including installation instructions.

Basic accessories

1:14 Truck Wheel axle steel Hi.Precision

€18.29

The Carson 1:14 precision wheel axles (item no. 500907091) made of steel are a high-quality tuning part for the steering of all TAMIYA trucks. Installation makes the steering virtually play-free and the driving feel more direct and precise. Two wheel axles, two spacers and two play-free ball joints are supplied as standard.

Basic accessories

1:14 Underride guard Dump trail. w/mount

€47.99

The 1:14 underride guard for tippers (500907366) is made of aluminum and has a rear light holder, ideal for model builders who want to equip their 1:14 tipper in detail. At 175 mm wide and approx. 50 mm high, it fits a frame width of 96 mm. Robust workmanship ensures an authentic look on the model. Scope of delivery: 1 set.

Basic accessories

1:14 Universal Antenna-Set (5)

€13.99

Carson 1:14 Universal Antenna Set 500907603 is the little extra for every truck fan: The universal antenna set in 1:14 scale contains five antennas and is used for further detailing your model. Model building enthusiasts appreciate the opportunity to add the finishing touches to their trucks.

Basic accessories

1:14 Universal tie-down-set lowloader

€29.49

Carson 1:14 Universal Lashing Set Low Loader (500907450) appeals to model building enthusiasts who want to lovingly equip their 1:14 low loaders. The universally applicable set includes five lashing eyes, two lashing hooks and a 300 mm long lashing chain. The perfect addition for detailed transportation and presentations. Not suitable for children under 14 years of age.   Warning! Not suitable for children under 14 years.

Tyres & rims

1:14 Wheel & Fulda Ecotonn+ Tire HLL (2)

€37.99

Carson 500907006 - 1:14 Fulda Ecotonn+ low-loader tire and rim set: For model builders who value looks and reliable performance. The set contains four low-loader tires (outer diameter 52 mm, inner diameter 30 mm, width 14 mm) and two twin rims with hubcaps; the rims are designed for retrofitting with 11×5×4 ball bearings (4 each).

Basic accessories

1:14 Wheel axle-Set for Carson Trailer

€29.99

500907158 1:14 wheel bolt set for Carson trailers enables conversion to wide rims to achieve the look of trailers with disc brake systems and to adjust the track width. The set contains six wheel studs. Suitable rims: 500907013 (front wheel rim wide, grey), 500907061 (front wheel rim wide, chrome), 500907159 (aluminum).

Tyres & rims

1:14 Wheel Hub Cover (2)

€8.99

1:14 wheel hub caps (500907353) are two black plastic caps with Ø 18 mm that fit perfectly on wide front rims. Compatible with the wide rims 500907013 and 500907061, they offer a clean finish, easy installation and a stable look - ideal for repairing or upgrading your 1:14 models.

Tyres & rims

1:14 Wheel wide Carson Trailer Chrome(2)

€26.49

The 1:14 Carson chrome trailer rim (500907055) offers the chrome-plated version of the plastic rim originally used on CARSON-MODEL SPORT trailers and appeals to model-making enthusiasts who value an authentic appearance. Ø 49 mm, width 27.5 mm, designed for two ball bearings 5x11x4; content: 2 pieces.

Tyres & rims

1:14 Wheel wide Carson Trailer grey (2)

€17.49

The 1:14 Carson trailer rim (item no. 500907154) in gray is a robust ABS rim, suitable for all CARSON trailers; scope of delivery: 2 rims and 2 hub caps. Mounting for two ball bearings 5×11×4 mm; matching Fulda Multitonn tires (item no. 500907012) are available separately. With TAMIYA-TS spray and primer, it can be color-matched to your model.

Tyres & rims

1:14 Wide Wheel f.Tamiya Trailer (2) Hex

€26.49

Carson 1:14 rim wide (500907053) for Tamiya trailers: chrome-plated plastic rims in hexagonal design, 2 pieces, Ø 49 mm, width 27.5 mm. Developed for converting from US dual tires to Euro singles and designed for the Fulda wide tire item no. 500907012. Gives your model an authentic look.

Basic accessories

1:14 Windshield wiper Set

€7.99

The 1:14 windshield wiper set (material number 500907369) from Carson enhances construction machinery, buses and snow groomers in model scale and appeals directly to model making enthusiasts. Made from plastic, the set contains a large double-arm wiper (wiper blade 60 mm, arm length 53 mm) and a small wiper (total length 42 mm, blade 31 mm) with a 2 mm mounting hole.

Basic accessories

1:14 Wooden EPAL Euro-Pallet

€4.59

500907608 - 1:14 wooden EPAL Euro pallet: Model-making enthusiasts will find a true-to-original Euro pallet made of real wood in 1:14 scale here. The type of wood, board thickness, finish and licensed stamping correspond to the original. Dimensions 83×55×10 mm, weight 7 g. Scope of delivery: 1 piece. Precisely crafted.

Basic accessories

1:14 Wooden Pallet-Cage with Europallet

€17.49

Carson 500907609 - 1:14 wooden lattice box on Euro pallet combines attention to detail and useful purpose in every model load. On a scale of 1:14, the transportable wooden lattice box brings realistic logistics to the miniature format: 85×57×60 mm, 22 g, delivery: 1 piece. Ideal for dioramas and authentic construction projects.

Basic accessories

1:14 Wooden Tarp hoop set (32)

€24.99

The 1:14 wooden bow set 500907163 (32-piece) is a true-to-scale wooden accessory that provides model builders with precise components for the construction and replacement of tarpaulin trailers in 1:14 scale. The 32-piece set is suitable for tarpaulin trailers 500907080 and for the 50090xxxx Fliegl MegaRunner models and enables an authentic detailed representation.

Basic accessories

1:14 Working light swiveling (1)

€6.99

500907576 - 1:14 Pivoting work light brings authentic detail and reliable function to your model. The small housing (Ø approx. 12 mm, length approx. 22 mm) can be swiveled and can be illuminated with LEDs or bulbs. A complete set is supplied: housing, joint, diffusing disk and fastening nut. Perfect.

Electronics

24x15mm Orange Flashing Light w/Elec.(2)

€82.99

The 500907010 rotating beacon 24x15mm orange with electronics provides a realistic warning effect on construction site and heavy transport models. Two tiltable lights (Ø14.5 mm, H25 mm) with four bulbs flashing in series are controlled by SMD flashing electronics via a ready-to-connect cable to the receiver. Set with circuit board (37×30×5 mm) and Graupner J/R connector.

Electronics

Gear shift.gate Carson Reflex2 14Ch. VA

€5.79

Gearshift gate 500907167 for Carson Reflex 2 (14 channels) combines robust stainless steel with precise gearshift guidance and is particularly suitable for shifting the gearboxes of Tamiya trucks. Specially adapted to the Reflex 2 with 14 channels, it appeals to model builders who value reliable function; scope of delivery: one shift gate.

Electronics

Gear shift.gate Carson Reflex2 6Ch. VA

€5.79

The shift gate 500907165 for the Carson Reflex2 6-channel is made of stainless steel and offers a robust solution for operating gearboxes. It is particularly suitable for shifting the gears of a Tamiya truck and is supplied individually (1x shift gate). Only suitable for Reflex2 6-channel.

Electronics

Gearboxmotor Support Legs Ca.Trailer (1)

€37.49

Gear motor supports Carson Trailer (500907199) is a ready-to-connect drive element for motorized trailer supports and drives the electric supports of the 3-axle dump truck Fliegl Stone Master (500907216). One motor is required per support (suitable for 500907218). Precise, robust and ideal for model builders who want to electrify functionality.

Basic accessories

Pylon-Set (10) 56mm

€9.29

Carson pylon set 500907197 - ten bright red plastic pylons, 56 mm each, perfectly sized for model building enthusiasts. The set secures courses and construction sites, ideal for skill driving and maneuvering exercises and fits 1:14 scale models and similar. Robust, highly visible and ready for immediate use.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Pole for Trailer hitch 500907182

€12.49

Carson 1:14 drawbar 500907377 combines precise form and function for the 1:14 scale: The drawbar made of reinforced plastic is compatible with the towing muzzle item no. 500907182 and is supplied including fastening material. Model builders appreciate the precisely fitting retrofit and replacement solution for trailers.

Electronics

1:14 7,2V LED-PCB 7-Section taillight

€57.99

500907387 - Carson 1:14 7.2V Uni7-chamber LED board comes as a pair (1× left, 1× right) and is fitted with SMD LEDs. The board works with a common positive pole and provides four light functions: Blinker, tail light, brake light and reversing light. Cable length approx. 250 mm; fits 500907037; rear lights not included. Not compatible with TAMIYA MFC.

Basic accessories

1:14 Trailer Splash guard 907235/907629

€31.99

1:14 Splash guard for trailers 500907646 improves visibility for the traffic behind. The set contains a large splash guard including mounting material and can be easily retrofitted to Fliegl Megarunner (500907235) and 3-axle stake trailers (500907629). Holes in the rear bumper are already provided; also suitable for self-construction.

Electronics

Control Switch Dumptrailer-Spindle Drive

€16.29

500907070 Dump truck spindle drive switch from Carson is the compact control switch that can be used to reliably control the gear motor of the 500907056 spindle drive from the 500907050 dump truck. Designed for 7.2 V NiMH or 7.4 V LiPo with BEC plug, it offers a BEC socket, two free cables and a maximum load capacity of 5 A. We get things moving!

Electronics

1:14 12V Spotlight recatular (2)

€26.99

Carson 1:14 rectangular headlights 12V, item no. 500907578, provide model builders with two precise headlights with circuit board. Plastic housing with ribbed glass, housing 8.5×8.5×7 mm, total height 14 mm, mounting Ø 2 mm (L 2.5 mm), circuit board 4.8×4 mm, cable approx. 200 mm. Incl. 2 sets and instructions - for detailed retrofitting.

Electronics

1:14 7,2-14V PCB License plate illumin.

€18.99

The 1:14 7.2-14V license plate light 500907381 is a compact circuit board with two LEDs for precise illumination of model license plates. It works with 7.2-14 V, has approx. 500 mm long cables and is supplied with a circuit board and assembly instructions. Specially designed for 1:14 scale models; suitable for license plate holder 500907034, not compatible with trailer lighting 500907071.

Basic accessories

1:14 Alum. Trailer palette case w/6 Pal.

€109.99

The 500907379 1:14 aluminum pallet box with six pallets gives your trailer realistic character. The kit with pre-milled parts includes box, six plastic pallets and instructions. Dimensions 180×190×70 mm, suitable for 96 mm frame width; flaps open true to the original. Suitable for Carson trailers 500907030/082/081/235/092. Assembly with high-viscosity superglue.

Electronics

1:14 LR Scheinwerfer LED (2)

€27.99

The Carson 500907144 1:14 LR/working headlights LED (2) 7.2V are high-quality replacement lights for model builders. Compatible with Liebherr LR634 (500907111) and TAMIYA Arocs roof lamp bracket (500907599). Housing 8.5×8.5×14 mm, pin Ø2×2.5 mm, circuit board 4.8×4.0 mm, cable 200 mm. Scope of delivery: 2 housings, 2 circuit boards, 2 resistors, instructions.

Basic accessories

1:14 Plateau Goldhofer

€46.99

Carson Goldhofer Plateau 1:14 (500907621) is a scale plateau made of plastic, suitable for the Goldhofer semi-trailer kit 500907569 in 1:14 scale. Model builders thus receive a direct, precisely fitting addition for their superstructure, which can be neatly integrated and completes the model.

Basic accessories

1:14 Volvo Underr.guard w/Tailight mount

€51.99

500907515 1:14 aluminum underride guard with tail light holder for the Volvo FH16 from Tamiya (300056360). The robust underride guard made of aluminum is required when converting to the building material plateau (500907509), allows the kit or universal rear lights (500907508, not MFC-compatible) to be fitted precisely and is supplied with two brackets and assembly instructions.   Warning! Not suitable for children under 14 years.

Electronics

Gearboxed Motor Low loader/Goosneck 22mm

€99.99

The 500907703 Gearboxed Motor Low loader/Goosneck 22mm is a 1:14 lifting spindle geared motor for model building enthusiasts that enables precise lifting and lowering movements. At 7.2 V/DC it achieves 157 rpm idle speed, continuous torque 198 mNm (continuous current 1.35 A) and peak torque 688 mNm. Suitable for 3-axle gooseneck low-loaders 500907700.   Warning! Not suitable for children under 14 years.

Electronics

1:14 7,2/12V Beacon Light bar Set FH16

€144.99

The 1:14 FH16 warning light set (item 500907633) is suitable for the TAMIYA Volvo FH16 tow truck (300056362) and includes a warning light board with base and electronics, equipped with 32 SMD LEDs and a light module with 15 programs. The connection for additional LEDs (up to max. 4×350 mA) enables a wide range of light variants; suitable position lights: 500907631.

Electronics

1:14 7,2/12V Pos.-lamp LED Vol.FH16XL750

€64.99

The Carson 500907709 is the 1:14 position lamp (LED) Vol.FH16XL750 for operation with 7.2/12V. Designed in 1:14 scale, it appears as the Vol.FH16XL750 LED position lamp and is aimed at model builders and collectors who are looking for a scale-oriented lighting option for suitable models.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Alum. LR634 Bucket protective grid

€68.49

Carson 500907380: 1:14 LR634 Aluminum top grille for the Liebherr LR634 crawler loader, milled from aluminum, offers an authentic look and durable protection for the bucket. The precisely manufactured grille fits perfectly, including fastening material and assembly instructions, can be installed quickly and appeals to model builders who value attention to detail and function.

Basic accessories

1:14 Alum. Rear Underride protec. Tipper

€53.99

Carson 500907619: 1:14 aluminum rear underride guard for tipper - a sturdy frame crossbar with underride guard and mount for rear lights. Suitable for TAMIYA rear tippers (300056357), including modified end cross member for mounting the drawbar (500907182), necessary when using the lifting kit (500907618) to maintain the coupling level. Perfect choice for demanding model builders.

Electronics

1:14 Carson SemiTrailer LightUnit 7sect.

€72.99

500907071 - 1:14 Carson SemiTrailer LightUnit 7-chamber is a ready-to-use lighting kit for 1:14 semi-trailers. Two equipped circuit boards with five SMD LEDs each click into the 7-chamber rear lights, an adapter cable for TAMIYA MFC-01/MFC-03 as well as trailer cable and instructions are included. Simply assembled, the set provides realistic lighting functions.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Carson Trailer E-Sup.Legs w/o Motor

€129.99

1:14 Carson Trailer E-supports (500907218) without motor give your model realistic functionality and stable support. Made of aluminum and steel, they require two geared motors (2×500907199), battery 500608107 and switch 500907070 for automatic operation. Suitable for 500907216, 500907030 and 500907050, among others; supplied with instructions.

Basic accessories

1:14 Construction platform long

€299.99

The 1:14 building material plateau long 500907509 from Carson transforms the TAMIYA Volvo FH16 timber transporter into a detailed building material transporter. Steel frame with integrated subframe, CNC-milled aluminum side panels with engravings, real wood floor and neodymium magnets lock five functional side panels. Dimensions 550×195×130 mm, height 75 mm, weight 2400 g.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Conversion Kit Materialtrailer

€299.99

The Carson 1:14 conversion kit for building material trailers Art. 500907649 converts the 1:14 3-axle flatbed trailer III steel (500907650) into a detailed building material trailer. CNC-milled aluminum drop sides with surface engravings, neodymium magnet locking, all 9 drop sides functional, 4 hinges each made of 1 mm sheet steel, removable posts; weight 2,500 g; all parts included.

Basic accessories

1:14 cross brace trailer hitch TAM Frame

€26.49

500907185 - 1:14 scale drawbar for TAMIYA frame: This robust crossbar made of 2 mm sheet steel is intended for model builders who want to attach the drawbar (no. 500907182) to the TAMIYA truck (no. 300056307). Recommended with the CARSON dolly (No. 500907210) for a Gigaliner articulated train, it ensures a precise fit and reliable tractive force.

Basic accessories

1:14 Fittingset f. 2-axle stanch.-trail.

€71.99

The 1:14 fitting set item no. 500907623 enhances the 2-axle Riedler stake trailer and serves to refine your model. The set includes a spare wheel on a wide chrome rim with wide tires, an aluminium spare wheel holder, two compressed air tanks turned from solid aluminium and a lashing set. Model builders appreciate the fine details; additional lashing kits are available at 500907450.   Warning! Not suitable for children under 14 years.

Electronics

1:14 LR634 Electronic Control Unit

€509.99

Carson 1:14 LR634 electronic unit 500907103 combines driving and lighting functions in a compact module for 1:14 scale models. It comes with five speed controllers, reversing beeper, LED set (4 front, 2 rear), cable set for 2 drive motors, tilt and lift spindle and rear ripper, limit switch circuit boards and operating instructions. Suitable battery: Li-Po 7.4 V/1300 mAh (T-Plug) item no. 500 608107.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 LR634 Gear train drive compon. Set

€209.99

Carson 500907105 - 1:14 LR634 Gearbox Drive Set is the gearbox drive set for the Liebherr LR 634 crawler loader (item no. 500907111) in 1:14 scale. Model builders and collectors who are specifically looking for the designated spare part will find the right solution for repairing and maintaining their LR634 model with this part number.

Electronics

1:14 LR634 Gearboxmotor shovel/ripper SD

€83.99

Carson 500907108 - Gear motor 1:14 LR634 for bucket and rear ripper. Specially designed for the spindle drive of the Liebherr LR 634 crawler loader, the motor delivers powerful performance at a rated voltage of 7.2 V (operating range 5-8 V): idle 560 rpm (360 mA), continuous 440 rpm (1.4 A), 105 mNm torque, 63:1 gear ratio, 26 g weight; precision manufactured for realistic model function.

Basic accessories

1:14 LR634 Lift & Shovel Spindle Drive

€689.99

500907102 - 1:14 LR634 spindle drive lift & bucket from Carson offers model builders the right spare part for the Liebherr LR 634 crawler loader (item no. 500907111) in 1:14 scale. The lift and tilt spindle restores the original movement function of the model and is aimed at enthusiasts who value attention to detail.

Electronics

1:14 Position-Light Unit FH16 Tow-Truck

€189.99

The Carson Position-Light Unit FH16 Tow-Truck (500907631) in 1:14 scale is a complete LED set for Tamiya Volvo FH16 tow trucks (300056362). It includes 34 LEDs: 2 high beams, 2 tail lights, 4 working LEDs, 2 turn signals, 2 position lights and 18 orange marker boards with 300 mm cable; plus lamp brackets, 2 Z-diodes and a resistor. Compatible with warning beams 500907633 and light module 500907586.

Basic accessories

1:14 Spindle drive Fliegl Stone Master

€209.99

The 1:14 tipping spindle Fliegl Stone Master (item no. 500907217) from Carson enhances the 3-axle tipper Fliegl Stone Master (no. 500907216) with realistic Z-kinematics for the motorized skip drive. Made of aluminum with steel screws and shafts, it requires the gear motor no. 500907166 for operation and provides a true-to-life lifting function.

Basic accessories

1:14 Spindle drive for Dump Trailer

€184.99

500907056 1:14 Spindle drive for dump trucks brings realistic function to model building projects. We get things moving! With the drive and the optional 500907066 geared motor, the body of the 500907050 dump truck can be tilted electrically; operated by remote switch or CARSON switch 500907070. Dimensions L700×W185×H235 mm. Scope of delivery: Drive with installation instructions.

Basic accessories

1:14 Trailer palette case w. Paletts (6)

€139.99

The Carson pallet box 500907651 in 1:14 scale is a high-end extension that adds more realism to your trailer. Made of laser-cut and CNC-bent sheet steel, it offers a true-to-original opening mechanism with neodymium magnet locking, space for 24 pallets and 6 plastic Euro pallets; there is also space for electronics. Compatible with 500907629 and 500907650.

Basic accessories

1:14 Trailer palette case w/ 6 paletts

€71.99

The Carson 500907153 1:14 pallet box (plastic) with six pallets gives your trailer a true-to-original character. Pre-milled parts in the frame enable easy assembly (polystyrene adhesive or superglue recommended). Dimensions 180×190×70 mm, suitable for 96 mm frames; flaps open realistically, up to 12 pallets per side. Ideal as load or storage space; incl. instructions. Aluminum version 500907379.

Basic accessories

1:14 Trailersuspension-Set w/ 8mm lift

€82.99

500907643: 1:14 trailer axle with 8 mm lift. The new CARSON generation with air suspension dummies and softer rubber bellows absorbs unevenness better and provides a true-to-original ride. Kit with two suspensions (standard & +8 mm) and instructions. Dimensions 78×165×50 mm, suspension travel 6/14 mm, articulation ~6/10 mm, load capacity ≈5,000 g, 5 mm axle.

Electronics

Drive Gear Liebherr Track Loader

€59.99

Carson 500907106 Travel geared motor for the Liebherr LR 634 crawler loader brings your stationary model to life: Compact and reliable, it replaces or supplements the drive technology and ensures realistic driving movements. One motor is required per track, ideal for precise repairs, detailed conversions and collectible model maintenance.

Electronics

Getriebemotor Kippspindel Fliegl (1)

€84.99

Carson gear motor tipping spindle Fliegl 500907166 is the gear motor for the tipping spindle of the Z-kinematics. It is required to drive the motorized drive no. 500907217 of the body of the CARSON 3-axle dump truck Fliegl Stone Master (no. 500907216). As an individual part, it offers model builders a suitable spare part option.

Electronics

Spindle Drive Gearbox-Motor Dumpt./LR634

€55.99

Gear motor spindle drive skip/LR634 (500907066) enables electrical tilting and unloading of spindle drive no. 500907056 on skip loader no. 500907050. A remote-controlled switch or CARSON switch no. 500907070 is suitable for operation. Technical dimensions: Length 700 mm, width 185 mm, height 235 mm. For model building enthusiasts.

Electronics

1:14 7,2V LED-PCB MB Taillight

soon available again

The Carson 500907556 - 1:14 7.2V MB LED tail light board enhances TAMIYA MB Actros models. The set with one left and one right circuit board, approx. 500 mm colored wires and instructions offers four functions: Blinker, driving light, brake light and reversing light for realistic lighting. Not compatible with TAMIYA MFC.

Basic accessories

1:14 Driver Figure "Susi"

soon available again

The 1:14 scale driver figure "Susi" (500907427) from Carson brings vivid details to your truck models and is already painted. With movable limbs, she can be placed in any driving position or sat on the passenger seat so that she is ready for immediate use. Ideal for local and long-distance transport dioramas; other 1:14 scale figures: John (500907426), Robert (500907186).

Basic accessories

1:14 SAF Coupler plate (reinfor.plastic)

soon available again

Carson 1:14 SAF plastic saddle plate (500907378) is the replacement plate for 1:14 scale models. Designed as an SAF saddle plate, it offers the right solution for replacement or retrofitting. Model building enthusiasts appreciate the authentic option for detailed construction and repair tasks.

Basic accessories

1:14 Trailer Mud Guard Set straight (4)

soon available again

Carson 1:14 trailer mudguard set 500907036 combines precision and scale accuracy for model builders: Four straight mudguards including brackets and mounting material form a complete set for detailed retrofitting or repair. Suitable for all 1:14 and 1:16 scale trailers and ideal for an authentic, robust look.

Basic accessories

1:14 Alum. stanchions f.500907622/907629

soon available again

500907652 1:14 aluminum stanchions give your model a professional look: made of steel and aluminum, compatible with the stanchion trailer III (500907629) and the stanchion trailer Riedler (500907622) or your own construction. The holders can be loosened and repositioned using two grub screws; includes detailed assembly instructions. Dimensions 205×190×10 mm, 160 g.

Basic accessories

1:14 Construction platform short

soon available again

Carson building material plateau short 500907510 in 1:14 scale quickly transforms the TAMIYA Volvo FH16 timber transporter into a building material transporter. CNC-milled steel frame with subframe uses original attachment points, no drilling required. CNC aluminum side panels with engravings, 3 hinges per side, neodymium magnets, real wood floor, dimensions 440×195×130 mm, 2000 g. Crane assembly possible.

Electronics

15x10mm Blue Flashing Light w/ El.(2)

only available from customer service

Carson rotating beacon 500907126: Two blue rotating roof lights with SMD flashing electronics generate the rotating light effect via four bulbs flashing in series and can be controlled via a free switching channel on the receiver. Roof mounting; swivels ±5°; base Ø 14.5 mm, height 15 mm. Delivery: 2 lights and ready-to-connect circuit board (37×30×5 mm) with heat-shrink tubing and Graupner J/R cable.

Electronics

1:14 12V LED-PCB Cascadia Taillight

only available from customer service

Electronics

1:14 7,2V LED-PCB Grand Haul.Taillight

only available from customer service

Carson 500907393 Grand Hauler tail light circuit board 1:14, 7.2V combines four light functions: right/left indicators in red, three position lights (red) with brightened brake light and reversing light. Perfect for detail-loving model builders. Color-coded strands, length approx. 550 mm, scope of delivery: one lighting circuit board and instructions. Note: not compatible with TAMIYA MFC.

Basic accessories

1:14 Alum. Trailer support legs (2) 67mm

only available from customer service

Electronics

1:14 Bumper Light-Kit Grand Hauler fr/re

only available from customer service

The 1:14 Grand Hauler LED kit 500907254 has been specially developed for the Grand Hauler and allows the front and rear bumper to be retrofitted with LEDs, ideal for detail-loving model builders. Can only be used in conjunction with MFC 01 or MFC 03. Scope of delivery: Connection unit with low-voltage protection, front circuit board (1×4 + 2×2 orange), rear circuit board (1×4 red), connection cable for MFC and battery.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Drive Shaft-Set MB1838LS/Volvo

only available from customer service

Carson 1:14 drive shaft set MB1838LS/Volvo 500013518 offers model building enthusiasts a precisely fitting cardan shaft set for the 1:14 scale. The cardan shafts are designed for the 4:1 intermediate gearbox and are compatible with the 56305 truck, an indispensable spare part for precisely restoring the drive ratio.

Basic accessories

1:14 LR Alu Sprocket wheel univer.(1)8mm

only available from customer service

Carson 500907149 - 1:14 LR Alu Sprocket Wheel (universal, 8 mm). The 1:14 scale aluminum sprocket wheel has a universal 8 mm mount and is therefore intended for various LR drive setups. Model builders will find a compact, metal replacement component for integration into their models here.

Basic accessories

1:14 LR Schaufelzähne KST (5)

only available from customer service

The Carson article number 500907145 stands for the 1:14 LR bucket tooth reinforcement made of plastic in a pack of 5. This Carson original is aimed at model building enthusiasts who are looking for suitable bucket teeth in 1:14 scale; the 5-piece plastic set supplements the spare parts arsenal and enables targeted stockpiling.

Basic accessories

1:14 LR Track with 2 stud link grey (10)

only available from customer service

500907148 - 1:14 LR track links, 2-web caterpillar track gray (10 pieces) are heavy-duty glass fiber reinforced plastic links. Pin and roller bearings with hardened, black oxidized steel pins and rollers ensure excellent running properties and a long service life. Suitable for 500907111 (Liebherr LR634). Dimensions W42×pitch15×L154 mm, 38 g. Contains 10 links including rollers, pins and circlips.

Basic accessories

1:14 LR634 Rear Ripper Spindle Drive

only available from customer service

Carson 500907101 - 1:14 LR634 spindle drive "Rear Ripper" is the specific component for 1:14 scale models and expressly designated for the LR634. Model building enthusiasts will thus find a clear assignment to the rear area; ideal when it comes to replacement, repair or faithful restoration of the function.

Basic accessories

1:14 Prop.shaft Set 6x4 (2) Tipper Steel

only available from customer service

500907613 - 1:14 drive shaft set 6x4 (2) Tipper Steel from Carson is the steel set for the specific conversion of the Tamiya rear tipper (300056357). Specially designed for models with two 6x4 self-locking axles (500907268), it provides the shafts required for precise retrofitting and reliable power transmission for demanding model builders.   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Prop.shaft Set 6x6 (4) FH adj.

only available from customer service

500907639 1:14 drive shaft set for the Volvo FH16 timber transporter makes the conversion to all-wheel drive simple and robust. The four-piece set made of hardened steel connects the 2-speed gearbox with distributor and front/rear axles; shaft lengths: 45 mm; 57 mm (57-62 mm); 38 mm (38-43 mm); 67 mm (67-82 mm). Length compensation guarantees safe guidance during loading, deflection and axle articulation.

Basic accessories

1:14 Prop.shaft Set 6x6 (4) Tipper Steel

only available from customer service

500907614 - 1:14 drive shaft set 6x6 (4) Tipper steel from Carson is the robust centerpiece for converting your Tamiya rear tipper 300056357 to a 6x6. Four precisely fitting cardan shafts ensure reliable power transmission when used with two self-locking rear axles (500907268), driven front axle (500907267), transfer case (500907610) and 2-speed manual gearbox (500907265).   Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Prop.shaft Set 8x8 (4) Tipper adj.

only available from customer service

Carson 500907642 1:14 Prop.shaft Set 8x8 (4) Tipper adj. is a precise spare parts set for true-to-scale 1:14 models and includes four drive shafts for 8x8 drive variants with adjustable tipper function. Model builders appreciate the exact fit, robust design and the option of repairing or upgrading to restore original function.

Basic accessories

1:14 Servo Mount 2-Speed Transfer-Gearb.

only available from customer service

Carson 500907288 - 1:14 servo mount for 2-speed transfer case. The robust aluminum bracket for 1:14 EU tractors (2- and 3-axle) can be mounted on existing frame holes. Scope of delivery: shift linkage, mounting material and installation instructions; compatible with the self-locking 2-speed transfer case (500907266) for precise shifting operations.

Basic accessories

1:14 Servo Mount 2SGB Arocs Plate

only available from customer service

The 1:14 aluminum servo mount 500907592 for the Mercedes-Benz Arocs is a robust, precision-fit mounting plate for model builders that offers continuous movement and precise servo positioning. Required when using the Carson 2-speed gearbox 500907265 and the aluminum base plate/battery holder 500907591. Compatible only with Arocs 300056352.

Basic accessories

1:14 Spare wheel mount (1pieced) Steel

only available from customer service

The 500907162 1:14 spare wheel holder (1-armed) made of steel from Carson is a solid holder that suspends the spare wheel on the trailer or tractor unit frame. Model builders appreciate the solid set with spare wheel attachment and mounting material; 2 mm holes are required before mounting, the wheel is fixed with the enclosed screw and mounting washer.

Basic accessories

1:14,5 Chain link (1) Aluminum

only available from customer service

Carson 500907552 - 1:14.5 scale chain link (1) made of aluminum is a precise single part especially for 1:14.5 scale model builders. This aluminum chain link serves as a direct replacement or addition in chains and is suitable for targeted repairs as well as the detailed construction of your models.