RC spares
Whether buggy, sports car, ship or helicopter: Carson provides you with high-quality spare parts for your RC model. Curious? Click here to learn more about RC spares.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, model accessory, 55 mm
500405863€28.49
A 1:10 chassis gains a clear suspension upgrade with this aluminium oil damper set in 55 mm format. The set contains 4 matching dampers, each built with a silver shock body, blue top cap, threaded adjustment collar, white coil spring and black eyelet mounts at both ends. The oil-filled design works through the damper body and shaft to control suspension travel more precisely than a spring alone. The threaded collar allows preload changes directly on each unit, making ride height and spring tension tuning part of the setup process on compatible model vehicles. With 4 dampers in one set, front and rear suspension can be equipped with the same component style for a more uniform chassis response. The aluminium construction adds a technical finish that suits performance-focused builds and replacement projects alike. This accessory fits naturally into workshop sessions built around suspension tuning, chassis refreshes and running gear upgrades on 1:10 RC models. Whether the goal is replacing worn shocks or refining the setup for different surfaces, the 55 mm damper format gives hobbyists a concrete component to work with. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, model part, 62 mm
500405864€28.99
Suspension tuning is one of the clearest ways to change how a 1:10 model behaves on the ground, and this Alu Oil Damper Set brings that adjustment into a compact 62 mm format. The set includes 4 matching dampers, combining threaded metal bodies, white coil springs and blue adjustment collars in a layout aimed at hobby-grade chassis setup. Each damper uses an oil-filled design to manage wheel movement with more control than a spring alone can provide. The threaded body gives room to alter preload, which changes how the suspension sits and reacts under load. That makes the set useful when a chassis needs a more even stance, a refreshed suspension feel or a setup better matched to the running surface. The aluminium construction adds a precise mechanical look, while the eyelet mounts follow the familiar format used on many RC suspension assemblies. On a touring chassis, buggy or truck platform in the 1:10 class, a matched 4-piece damper set helps keep front and rear suspension behaviour balanced during acceleration, braking and corner entry. The included adapter parts expand the installation options for compatible layouts, whether the goal is replacing worn dampers or refining a custom setup for regular running sessions. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, RC accessory, 100 mm
500405758€19.49
Suspension tuning shapes how a 1:10 RC chassis settles into corners, absorbs bumps and transfers weight under braking. This aluminium oil damper set brings that adjustment into a compact 100 mm format, with 2 coilover units that combine spring support and oil damping for a more controlled mechanical response. The threaded damper bodies and blue adjustment collars give the setup a clear tuning point for spring preload, so ride height and chassis balance can be matched more closely to the build. Each damper uses black mounting eyelets at both ends for straightforward attachment within compatible suspension layouts. The silver bodies, exposed springs and blue anodised details also make the hardware easy to identify during maintenance or rebuild work. As a replacement or upgrade part, the set suits hobby projects where suspension behaviour matters as much as drive power or tyre choice. On workshop benches, during rebuild sessions or as part of a fresh chassis setup, these 2 dampers add a concrete tuning option to compatible 1:10 model vehicles. They fit naturally into projects focused on handling refinement, service work or a more adjustable suspension layout. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, RC accessory, 85 mm
500405757€19.49
At 1:10 scale, this Alu Oil Damper Set brings metal suspension hardware and tuning potential into RC workshop builds. The 85 mm format and 2-piece set suit model builders looking to replace worn dampers or refine a compatible chassis with oil-filled suspension components. The aluminium bodies pair with coil springs, polished shafts and mounting eyelets in a compact coilover layout. The threaded construction allows spring preload changes directly at the damper, so ride setup can be adjusted to match surface conditions and chassis balance. Oil damping adds a controlled mechanical action between compression and rebound, which helps the suspension settle more cleanly after bumps and direction changes. The included small hardware parts support mounting and setup on compatible model vehicles. Whether the goal is a rebuild, a suspension refresh or a more precise base for further tuning, these dampers fit naturally into hands-on RC maintenance. In a bench setup, the 85 mm length gives a clear reference when matching replacement parts, and on a running model the paired design supports even installation across one axle. Warning! Not suitable for children under 14 years.
Additional spares
1:10 Bokusa BL 2S, RC car accessory set
500405994€10.49
The Bokusa BL 2S uses a 1:10 XL chassis format, and this accessory set gathers 3 named components for that platform: a battery holder, covers and a wheelie bar. For model-building enthusiasts, that makes it a focused parts set for repair work, rebuilds or keeping a running chassis complete with the pieces stated in the data. The battery holder addresses the power area of the chassis, while the covers serve the matching body or chassis sections named for this set. The wheelie bar adds a separate rear-end component that suits setups where hard launches can put extra demand on the back of the car. The data also links the set to the Bokusa BL 2S orange and Bokusa BL 2S yellow versions, giving a clear reference to the variants named for this range. With a minimum age marking of 14 years, the set sits in the hobby-focused RC field rather than entry-level toy use. On the bench, these parts support a straightforward way to replace worn or missing chassis pieces on a compatible model. In a rebuild, the combination of holder, covers and wheelie bar helps return the 1:10 platform to a more complete running condition without guessing at unrelated parts.
Additional spares
1:10 Bokusa Wheel Set, model wheels, XL chassis
500900207€23.49
This 1:10 wheel set is made for the Bokusa BL 2S on the 1:10 XL chassis and brings the large-format look of the model back into a complete 4-wheel setup. With a diameter of 125 mm, a width of 60 mm and a 12 mm wheel hub, the dimensions are clearly defined for workshop planning, replacement work and chassis-specific preparation. The 4-piece layout covers the full running set in one pack, which is useful when a matched wheel format is needed across the whole vehicle rather than on a single corner. The stated Bokusa BL 2S variants in orange and yellow place this set within that model line, while the XL chassis reference keeps the application precise. For hobby workbench use, the combination of 125 mm diameter and 60 mm width gives a clear basis for checking clearance, stance and fit before installation. The 12 mm hub size also matters when selecting the correct mounting hardware for the chassis configuration. In the workshop, this set suits routine replacement, rebuilds after heavy running sessions or preparation of a Bokusa BL 2S kept as a ready spare. The defined dimensions make it easier to match an existing setup on the 1:10 XL platform without guesswork.
RC chassis & attachments
1:10 Bokusa, body set, XL chassis orange
500800121€34.49
The Bokusa look brings a bold competition-style presence to the bench and track, and this body set is shaped for the 1:10 XL chassis in a vivid orange finish. With the bodyshell, spoiler and mount grouped in one set, it provides the core exterior parts needed for a focused rebuild or a visual refresh. The 1:10 scale keeps the set aligned with common RC model dimensions, while the XL chassis fit gives the shell a clear application within an existing vehicle platform. The spoiler adds the rear body detail that completes the Bokusa silhouette, and the matching mount supports a consistent installation with the included shell parts. This set is aimed at model-building enthusiasts aged 14 Years and up who enjoy tuning the look of a running car with dedicated replacement parts rather than generic bodywork. The orange colour stands out clearly on the chassis and gives the finished model a strong visual identity during workshop preparation and driving sessions. On the workbench, the set suits shell replacement after wear, crash damage or a full style change on a 1:10 XL chassis. It also fits hobby sessions centred on rebuilding an existing RC car with a coordinated bodyshell, rear spoiler and mount instead of mixing separate exterior parts.
RC chassis & attachments
1:10 Bokusa, body set, XL chassis yellow
500800122€34.49
The Bokusa body set brings a bold yellow finish to 1:10 XL chassis builds and focuses on the parts that define the model's outer shape. The set includes a body shell, a spoiler and a mount, giving hobbyists the core exterior components named for this version. With the 1:10 scale stated directly in the designation, the set is aimed at model-building enthusiasts working within a familiar RC size class. The spoiler adds the rear styling element that completes the Bokusa look, while the mount is listed alongside the shell so the body setup is built around the specified chassis format rather than a generic replacement part. The yellow colour keeps the appearance easy to spot during workshop handling and running sessions. Age marking: 14 Years. Batteries are not included. This body set suits rebuilds, visual refreshes and replacement work on compatible 1:10 XL chassis projects. On the workbench, the named shell components help shape a consistent exterior; once fitted, the Bokusa design gives the model a clear, track-ready presence in yellow.
RC chassis & attachments
1:10 Offroad Fighter Cage, body set, red
500800112€28.99
The Offroad Fighter Cage body set brings the red race look of the 1:10 XS-Chassis back into view with replacement exterior parts made for the matching Carson platform. Designed for chassis numbers 500404252, 500404253, 500404254 and 500404255, the set focuses on the visible upper structure of the buggy and restores the model's distinctive cage-style appearance. Included in the set are red body parts, a rear wing, stickers and pins. The shell sections carry the Offroad Fighter Cage styling, while the separate wing extends the rear profile with the same competition-inspired character seen on off-road buggies. Sticker elements add the final graphic accents to the bodywork, and the pins provide the fastening hardware needed for mounting the parts on the compatible XS-Chassis. This makes the set useful both for replacing worn exterior pieces and for rebuilding a model with the correct visual identity. On the bench, the set supports a clean refresh of the buggy's outer structure without changing the underlying chassis layout. Once fitted, the body panels, wing and graphic details give the model a finished track-ready presence that suits shelf display just as well as regular RC running sessions. Age 14 years and up
RC chassis & attachments
1:10 Ryken blue, body set, for XS chassis
500800117€28.99
The 1:10 Ryken blue body set brings a fresh exterior for Carson XS models with a black and blue painted bodyshell, a matching rear spoiler, decals and body clips. Designed for 1:10 XS chassis, the set focuses on the visible character of the model and gathers the key shell components in one package. The painted shell saves the step of starting from an uncoloured body and gives the Ryken design its finished look from the outset. Decals handle the graphic details, while the included clips cover the mounting points needed to secure the shell to the chassis. The rear spoiler completes the body layout and carries the line of the shell through to the back of the car. Minimum age: 14 years. This set suits rebuilds, shell replacements and visual refresh projects on compatible XS models such as 500404362 and 500404363. On the bench, it supports a clean change of appearance; once fitted, it gives the chassis a complete outer form ready for running or display between sessions.
RC chassis & attachments
1:10 Ryken green, body set, XS chassis
500800118€28.99
The Ryken green body set brings a black and green painted exterior to 1:10 XS models and gives the chassis a defined on-road character straight from the first fitting. Designed for Carson XS references 500404362 and 500404363, the set focuses on the visible parts that shape the finished model's look. Alongside the painted bodyshell, the set contains a rear spoiler, decals and body clips. That combination covers the main exterior elements needed to dress the chassis and complete the bodywork with matching details. The painted finish reduces preparation compared with an unpainted shell, while the decals add the intended markings for the Ryken design. Minimum age is 14 years. This set suits rebuilds, shell replacement after heavy use, or a visual refresh for an existing XS model. It also works well when a compatible chassis is being prepared for a new body style and the required mounting clips and matching spoiler need to be in the same set.
RC chassis & attachments
1:10 Tekuro Body Parts Set, body shell
500800119€22.99
The 1:10 Tekuro Body Parts Set brings the XS model line a complete outer refresh with a grey and green painted body shell, matched rear spoiler, decals, and body clips. Built as a replacement set for Carson XS models 500404360 and 500404361, it restores the Tekuro look with the key exterior parts grouped in one pack. The painted shell saves the extra step of applying the main colour finish, while the included decals handle the model-specific markings that give the body its final identity. The rear spoiler carries the styling through to the back of the shell and keeps the set visually consistent across the full body layout. Body clips are part of the contents as well, so the shell can be mounted with the fastening parts intended for this changeover. The product data states an assembly time in minutes, but no exact figure is given. This set suits rebuilds after wear, a damaged shell replacement, or a visual update between running sessions. For hobby benches focused on maintenance and model care, the Tekuro body set provides the exterior parts needed for a clean return to the road-ready appearance.
Additional spares
1:10 XL Chassis, model chassis, Bokusa BL 2S
500406000€21.99
The 1:10 XL Chassis brings a large-format base layout into the Carson Modelsport range, centred on a plastic chassis tray and the Bokusa BL 2S designation. With its XL format and clearly defined platform structure, this chassis suits hobby builds that start from the core frame and grow through individually chosen running components. The plastic chassis tray forms the main structural element and gives the build a dedicated base for further setup. Two colour versions are listed for the Bokusa BL 2S concept, orange and yellow, each carrying the same chassis identity with a different visual finish. The age marking is 14 years, which places this chassis in a hobby-oriented context rather than an entry-level toy range. Because the available data identifies this as a chassis rather than a complete ready-to-run vehicle, the focus stays on the base platform itself and on the scope it offers for a more individual build. On the bench, the 1:10 format gives model-building enthusiasts a familiar scale for planning a project around the chassis structure. In a collection or workshop setting, the XL layout and Bokusa BL 2S naming create a clear starting point for a custom RC model with a strong visual presence.
Ball bearings
1:10 XS Bearing Set, RC accessory
500405935€18.29
This 1:10 XS Bearing Set is made for Carson XS-Chassis vehicles and brings 15 bearing components together for maintenance, repair or replacement work on key rotating points. The set is listed for the XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363, covering Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants named in the data. Ball bearings are used where axles, wheels or drivetrain parts need clean, low-friction movement, and this set supports that function with matching components sized for the chassis family above. The product image shows a mix of larger sealed bearings and smaller metal bearing parts, giving the set the range needed for different mounting points within the model. That makes it a practical choice when a running chassis needs fresh rolling hardware rather than a full rebuild of unrelated parts. In workshop use, the set fits naturally into routine servicing after repeated driving sessions, or into a focused chassis refresh before the next run. It also suits hobby benches where a compatible spare set is kept ready for the XS platform, so repair work can stay centred on the drivetrain and rotating assemblies named for this bearing layout.
Additional spares
1:10 XS Chassis with Shaft Cover, spare part
500405930€20.99
Built around the 1:10 XS platform, this chassis with shaft cover serves as a dedicated spare part for selected CARSON models and restores the vehicle's core lower structure with the matching driveline cover in place. The black molded section combines the main tub and the cover layout in a form that matches the XS-Chassis design used across several off-road variants. Inside the chassis, the ribbed reinforcement pattern adds structural definition across the floor, while multiple screw posts and mounting holes provide the fixed points needed for compatible components from the original layout. Partition walls and integrated supports divide the interior into clear mounting zones, which helps keep the installation of matching assemblies consistent with the intended platform geometry. At both ends, the raised mounting sections and cylindrical connection areas are formed to accept the corresponding compatible assemblies used on the listed XS-Chassis vehicles. Compatibility is stated for CARSON XS-Chassis references 500404252, 500404253, 500404254 and 500404255, covering Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red. The 14 years marking is stated in the product data. As a replacement component for an existing RC model, this part suits repair work, rebuilds and the return of a worn chassis base to its original platform layout.
Axles & drive shafts
1:10 XS Dog Bone Rear, spare part drivetrain
500405937€17.79
The dog bone shaft is a core link in many RC drivetrains, carrying power from the differential to the wheel side while allowing the suspension to move. This 1:10 XS Dog bone rear set includes 2 rear drivetrain shafts for compatible Carson XS-Chassis vehicles and is intended as a dedicated spare part for maintenance or repair. The set is specified for the Carson XS-Chassis platform and matches the listed models 500404252, 500404253, 500404254 and 500404255, as well as 500404360, 500404361, 500404362 and 500404363. In the range, these references cover Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken versions. The dogbone layout uses rounded ends with cross pins to sit in the drive cups and transmit rotational force even as the rear suspension geometry changes during running. The black metal parts shown are shaped for drivetrain duty and suit workshop stock for regular wear replacement. As a rear axle spare part, this set fits hobby use where a compatible chassis is already in service and the drivetrain needs a fresh mechanical link after heavy off-road sessions or routine upkeep. Age marking: 14 years.
Wishbones
1:10 XS Lower Arms Kit Front, spare part
500405924€13.49
This 1:10 XS Lower Arms Kit Front is a dedicated spare part set for Carson XS-Chassis vehicles and focuses on the front suspension area where accurate fit matters during repair work. The set combines 2 lower arms, 2 holders and 4 pins, giving model-building enthusiasts the named components needed for a targeted replacement on the front end. Compatibility is stated for the XS-Chassis references 500404252, 500404253, 500404254 and 500404255. These correspond to the Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red variants listed in the data, which keeps the application of the set tied to clearly identified chassis versions. As a front-specific spare parts pack, the kit is suited to maintenance after wear, impact or disassembly in the suspension area. The grouped parts selection also keeps matching holders and pins together with the lower arms, which helps streamline workshop preparation for the repair. On the bench, the set fits naturally into routine chassis servicing, rebuilds after running sessions or the replacement of damaged front-end parts on compatible models. The 14 Years marking is stated in the product data.
RC shock absorbers & damper bridges
1:10 XS Oidamper Set, model accessory, 82 mm
500405966€18.99
The 1:10 XS Oidamper Set brings a dedicated suspension component to the Carson XS-Chassis platform with 4 oil shocks in an 82 mm format. Built as a model accessory rather than a universal part, the set is specified for a defined group of XS vehicles, making it a focused choice for maintenance or chassis tuning on compatible models. Compatibility is stated for the Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The listed vehicles include Stadium Fighter in blue and orange, Offroad Fighter Cage in turquoise and red, Tekuro in grey green and grey blue, and Ryken in blue and green. With 4 matching dampers in one set, the suspension layout can be equipped with the same damper type at all corners. The oil shock design works through fluid damping inside each unit, where the piston movement through oil helps moderate compression and rebound. That makes the set useful in workshop servicing after wear, in a rebuild of a compatible XS model, or when replacing existing suspension units with the same 82 mm specification. The age marking in the data is 14 years. Batteries are not included.
Pinions & gears
1:10 XS Pinion Gear 21T, spare gear
500405934€5.99
A 21T pinion gear in module 0.5 brings the drivetrain back into service on Carson XS-Chassis 1:10 vehicles. The compact drive part uses straight teeth and comes with an M3 screw, so the gear and its matching fastening hardware are supplied together for a direct replacement task. This spare gear is listed for Carson XS-Chassis references 500404252, 500404253, 500404254 and 500404255. The fitment list also names 500404360, 500404361, 500404362 and 500404363, covering Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants within the XS-Chassis range. The side hub fixing point shown on the gear works with the included screw to lock the part onto the shaft. That makes the component useful when drivetrain wear, damage or routine servicing calls for a fresh pinion. In workshop use, the small format suits the parts tray, pit box or spares case for quick maintenance between running sessions. Age marking: 14 years.
Wishbones
1:10 XS Upper Arms Kit, chassis spare part
500405929€15.49
This 1:10 XS Upper Arms Kit is a chassis spare part for compatible CARSON XS-Chassis vehicles and brings together key linkage pieces for suspension and steering work in one set. The package contents named in the data include 4 upper arms for front and rear use and 2 steering linkage parts, making it a focused replacement set for mechanical connection points on the model. The kit is specified for CARSON XS-Chassis references 500404252, 500404253, 500404254 and 500404255. Those model numbers cover Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red. The parts shown use eyelet-style ends and matching small hardware for pivoting connections within the chassis layout, which suits routine maintenance when worn or damaged links need to be exchanged. For hobby workbench use, this kind of set helps restore the intended geometry of the front or rear assembly without replacing unrelated components. With age marking 14 Years, the set fits the hobby-focused character of RC model upkeep and rebuild work. It suits repair sessions, spare-parts storage and planned chassis servicing on compatible XS models, especially when steering response or suspension articulation depends on fresh linkage parts.
Additional spares
1:10 XS Wheel Hex Nut Pin Kit, chassis spare
500405928€5.99
Built for the Carson XS-Chassis platform, this 1:10 wheel hardware set brings the key mounting parts for a complete wheel connection into one pack. The set contains 4 wheel hexes in 12 mm format, 4 M4 nuts and 4 pins, giving model-building enthusiasts the exact component group used between axle and wheel on the listed chassis versions. The wheel hexes sit at the centre of the mounting system, where the pin fixes the hex on the axle and the nut secures the wheel once fitted. That makes the set useful when original hardware is worn, misplaced during maintenance, or being replaced as a matched group across the vehicle. The 12 mm hex size is a common RC wheel interface, while the M4 nuts match the fastening point named in the data. Compatibility is stated for Carson XS-Chassis references 500404252, 500404253, 500404254 and 500404255. In workshop use, this set supports straightforward servicing on the Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red variants named for the platform. It suits bench stock for rebuilds, wheel changes and routine running repairs on the compatible XS-Chassis models.
RC chassis & attachments
1:10 XS-Chassis spare parts set
500405931€13.49
Built for the 1:10 XS-Chassis platform, this spare parts set brings together several key replacement components in one pack for a focused repair or rebuild. The set covers the Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363, linking it directly to Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants. The contents combine structural and mounting parts rather than decorative add-ons. A motor and chassis cover sits alongside the battery holder, while 4 body holders restore the shell mounting points on the vehicle. The wheelie bar completes the set with a rear chassis component used on this platform. This grouping helps keep a repair centred on the exact areas that often need replacement after heavy running, rollovers or repeated body removal. The black moulded parts are laid out as separate components for clear identification during workshop preparation. In hobby use, this set suits maintenance of an existing XS-Chassis vehicle, whether the goal is replacing worn mounts, rebuilding a damaged rear section or returning a stored model to running condition. The age marking is 14 years and up.
RC chassis & attachments
1:14 Clearance Lights, model accessory, 2 pcs
500907807€11.49
Marker lights are a small detail with a big visual role on scale trucks, and this 1:14 clearance light set brings that road-going look into a model build with red and amber lenses. The set contains 2 pieces and is listed as a model accessory for hobby use. Its compact format suits detailing work where edge markers help define the outline of a cab, body or trailer in scale form. The red and amber colour combination follows the stated design and creates a clearer visual break between body panels and fitted trim. As a separate accessory, the set can support a fresh build, a repair, or the replacement of existing marker parts where the original look needs to be restored. The 1:14 scale keeps the proportions aligned with matching model projects rather than forcing an oversized lighting detail into the build. On the bench, the set fits naturally into finishing stages where small exterior parts shape the final appearance. In display use, the coloured markers add another layer of realism to trucks and trailers that rely on visible body details rather than large mechanical changes alone.
Replacement & spares for combustion models
1:8 Airfilter Foam, model accessory, 2-pack
500905118€3.59
In 1:8 model running, the air filter is one of the small parts that has a direct effect on how cleanly the engine can breathe. This set provides 2 cylindrical foam airfilter inserts with a central opening, made to fit the matching filter layout used on 1:8 models and to restore the intake with fresh filter material. The foam structure is porous, so incoming air can pass through while dirt and dust are held back before they reach the engine's internal components. The hollow centre supports mounting onto the corresponding filter core, and the rounded cylindrical form matches the compact shape commonly used around model engine intake systems. As a replacement accessory, the set is aimed at routine upkeep rather than conversion work, making it a practical addition to workshop supplies for nitro model maintenance. The pack contains 2 inserts, which is useful when one filter is already in service and another fresh element is needed for the next change. On dusty off-road tracks, practice areas, or race-day pit tables, fresh foam inserts help keep maintenance intervals organised and the intake system properly equipped. The 14 years and up marking is stated for the accessory, and the compact format stores easily alongside other service parts for regular model care.
RC chassis & attachments
1:8 Akuma, body set, pink grey shell
500801040€33.99
The Akuma name suits the sharp, competition-style shape of this 1:8 body set. Pink and grey graphics spread across the moulded shell and separate rear wing, giving the buggy a striking race-ready look while keeping the outer panels visually matched. The shell shows pronounced aerodynamic contours, vent-style moulded detailing and prepared mounting points that guide installation on the vehicle. Alongside the main body and wing, the set includes fastening parts shown for the assembly: body clips, screws, nuts and spacers. That combination makes this set a practical choice when an existing shell needs replacement or when a fresh exterior is planned for an Akuma build. The separate wing adds another defined element to the silhouette and carries the same visual language as the shell itself. In workshop use, the set supports a straightforward body refresh with coordinated parts instead of piecing together individual exterior components. Once mounted, the bold contrast of bright pink, grey, black and white stands out clearly during running sessions and gives the model a focused off-road racing character. Warning! Not suitable for children under 14 years.
Pinions & gears
1:8 BL 13T Steel Pinion Gear, model accessory
500906202€10.79
In 1:8 model racing, small drivetrain parts shape how power reaches the wheels. This BL 13T Steel Pinion Gear hard is a compact transmission component for brushless 1:8 setups, built to sit on the motor shaft and pass rotation into the geartrain through its 13-tooth profile. The gear combines a central bore with a side fastening point, a layout that supports fixed mounting in the drive assembly. That construction matters during servicing, because a pinion must sit in the correct position to engage the matching gear evenly. The steel specification given in the data places the focus on the working surface that handles direct tooth contact. As a dedicated replacement or workshop spare, this part belongs in rebuilds, routine maintenance and gearing updates where worn drivetrain hardware needs to be exchanged with the correct tooth count. On the bench, the pinion fits naturally into motor and transmission work on 1:8 brushless models. In running setups, it serves as the small but essential link between motor output and the rest of the drivetrain, making it a useful component to keep ready for repairs and setup changes. Warning! Not suitable for children under 14 years.
Pinions & gears
1:8 BL 14T Steel Pinion Gear, RC accessory
500906203€10.79
In 1:8 brushless model driving, small transmission parts have a direct effect on how power reaches the wheels. This 14T steel pinion gear is made as a compact RC accessory for compatible 1:8 BL setups, where the tooth count becomes part of the gearing choice. The steel construction places the focus on a core drivetrain component rather than a cosmetic add-on. As a pinion gear, it sits at the motor side of the transmission and works with a matching spur gear to pass rotation into the rest of the drive system. The 14-tooth layout is a concrete specification for repair work, replacement of a worn gear, or a deliberate gearing change within an existing setup. The product image also shows a central threaded opening and a perpendicular threaded side hole, indicating a fastening arrangement designed for mounting on a shaft with a set screw. This kind of workshop part suits bench maintenance, rebuilds after heavy running, and targeted tuning of compatible RC vehicles. The age marking is 14 years+, matching its role as a technical hobby component within model-building and RC maintenance. Warning! Not suitable for children under 14 years.
Pinions & gears
1:8 BL 15T Steel Pinion Gear, RC spare part
500906204€10.79
In 1:8 brushless RC setups, the pinion is the small part that sets the first link in the drivetrain. This BL 15T Steel Pinion Gear uses 15 teeth and a steel body to mesh with the main drive gear in compatible model vehicles, giving hobby work a concrete, mechanical focus right at the motor shaft. The gear form shown in the data is built as a compact cylindrical pinion with straight outer teeth, a central bore and a side threaded hole for fastening. That layout allows the pinion to sit on the shaft and be fixed in place with a grub screw, an important detail when the motor's rotation has to transfer cleanly into the transmission. The 15T specification also matters in workshop planning, since tooth count is one of the key figures used when replacing a worn pinion or matching a drivetrain setup to an existing spur gear. As a steel spare part, it fits naturally into maintenance, repair and tuning work on 1:8 brushless RC models. On the bench, this kind of component is used during drivetrain service, rebuilds or gearing swaps where a fresh pinion restores proper meshing between motor and transmission. Age marking: 14 Years. Warning! Not suitable for children under 14 years.
Pinions & gears
1:8 BL 16T Steel Pinion Gear, model accessory
500906205€10.79
A small drivetrain part can make a clear difference in how a 1:8 brushless model puts power down. This BL 16T steel pinion gear is built as a dedicated model accessory for RC vehicle transmissions, with 16 teeth forming the drive interface between motor and spur gear. The gear uses steel for the toothed section, giving this heavily loaded contact point a material suited to repeated meshing in fast-running setups. Its compact cylindrical form keeps the part focused on the job of power transfer rather than adding bulk to the motor mount area. The central bore fits over the motor shaft, while the side fixing point is designed for a fastening screw that locks the pinion in place. That combination supports accurate positioning on the shaft and a direct mechanical link from the motor into the rest of the drivetrain. The 1:8 scale reference places it in the class of larger RC models where gearing choice plays a practical role in setup and maintenance. Whether used as a replacement for a worn gear or as part of a drivetrain change, this 16T pinion belongs in the workshop stock for compatible brushless RC vehicles. It suits rebuilds, routine servicing and gearing adjustments where a specific tooth count is needed to match the transmission layout. Warning! Not suitable for children under 14 years.
Additional spares
1:8 Drakuro Chassis, RC chassis, 4WD
500406050€41.99
The 1:8 Drakuro chassis brings a 4WD layout into a dedicated RC platform built around the fundamentals that matter to model enthusiasts. As a chassis-only format, it centres the project on the rolling base itself, creating a clear starting point for a build shaped by component choice, body selection and individual setup decisions. Within the Models & Accessories range, this Drakuro version stands as a focused foundation rather than a finished vehicle, which gives the chassis a different appeal from ready-to-run formats. The 4-wheel-drive arrangement distributes drive across all 4 wheels, supporting a composed feel when the model is set up for varied running conditions. The chassis designation also signals room for a more personal configuration, where electronics, bodywork and finishing direction can be chosen to match the intended use. Assembly time is stated in minutes in the product data, underlining its place in the hands-on side of the hobby. A battery is required separately. On the bench, the Drakuro chassis suits projects that begin with the platform and grow through careful parts selection. Once equipped, the 1:8 format and 4WD concept make it a strong base for builders who enjoy shaping how an RC model looks, responds and runs through their own setup choices. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 KoD 2.0 Body-Set, car body, green
500801037€33.99
The KoD 2.0 Brushless body set in 1:8 scale brings the race-buggy look of the model back into view with a green replacement shell and a separate matching rear wing. As a spare part for 500409095, this set is intended for the corresponding Carson model and focuses on the visible outer bodywork rather than the running gear underneath. The shell is shown with a bold green and black layout, honeycomb graphics and tinted window styling that give the body a sharp off-road character. Markings such as King of Dirt 2.0, KOD 2.0, Brushless and the number 1 are already part of the displayed design, so the replacement keeps the model line recognisable after a body change. The rear wing carries matching graphics and mounts as its own component above the back section. Small fastening parts shown with the set include 2 screws, 2 clips and 2 black fixing pieces for the body assembly. This kind of spare bodyshell suits workshop swaps after heavy running sessions, visual refreshes between outings, or a rebuild of a worn shell on the matching chassis. For hobbyists working on a KoD 2.0 Brushless, the set restores the model's signature appearance with the body elements grouped together in one replacement package. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 KOD 2.0 Body-Set, car body, orange
500801036€33.99
The 1:8 KOD 2.0 Body-Set brings the KingofDirt look back onto the buggy with an orange finish, bold white and black graphics, and a body shape made for the KOD 2.0 Brushless designation in the data. As a spare part, this set focuses on the visible outer structure of the vehicle and gives the model a fresh, track-ready appearance. The shell uses a competition-style layout with marked window areas, angular surfaces, and a matching rear wing that continues the graphic theme across the back of the buggy. The image shows hexagon pattern details, KO 2.0 markings, and number graphics on the wing side plates, adding a clear racing character to the body package. Mounting hardware is also shown with the set, including small fastening parts for fitting the shell and wing to the vehicle. This keeps the replacement focused on the body assembly rather than the chassis or drive components. In the workshop, the set suits a worn shell swap or a visual refresh between running sessions. On the track, the orange body and rear wing give the buggy a strong competition look that fits the KOD 2.0 Brushless style while keeping the model's exterior consistent. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 KoD Brushless, body kit, RC bodyshell
500801025€31.49
The KoD Brushless body kit brings the 1:8 buggy back to its sharp, race-bred silhouette with a polycarbonate shell shaped for the model's off-road stance. Digital camouflage graphics in black, grey, white and blue give the surface a striking competition look, while the dark tinted windscreen area adds contrast across the upper section. The shell is formed with pronounced contours and side vent details that define the buggy profile from nose to rear deck. Pre-cut mounting holes save workshop time when replacing a worn cover, and 2 metal body clips are included for fastening the shell to the body posts. As a dedicated body kit, this part focuses on the outer structure and visual finish of the model rather than the chassis hardware underneath. In the workshop, it suits a damaged shell swap before the next run or a visual refresh between driving sessions. On the buggy, the finished cover restores the complete look of the KoD Brushless and gives the model a clean, track-ready presence on dirt sections and off-road layouts.
Replacement & spares for combustion models
1:8 Masterfix tuned pipe set, exhaust system
500905071€39.99
Built around the classic layout of a tuned nitro exhaust, the 1:8 Masterfix tuned pipe set brings a chrome-finish exhaust system to RC car builds that use a separate header and resonator chamber. The polished metal surfaces, bulb-shaped pipe body and angled rear outlet give the assembly a purposeful competition look on the chassis. The set is configured as a 2-piece exhaust arrangement with a curved header pipe and a main muffler section joined by a spring-retained coupling. A sealing ring sits at the connection point, and a pressure nipple is mounted on top of the chamber for the fuel-pressure line used on nitro layouts. These details make the assembly easy to place and route within a 1:8 vehicle build while keeping the pipe geometry clear and compact. The chrome finish also makes the exhaust stand out against anodised alloy parts, dark chassis plates and body cut-outs. Mounted on a 1:8 nitro RC car, the exhaust adds the visual character associated with tuned engine setups, whether the build is being refreshed with replacement parts or assembled with a more focused racing style. Age marking: 14 Years. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 Virus 4.1 Body Set, bodyshell
500801020€39.99
The Virus series brings competition-inspired RC styling into 1:8 scale, and this Virus 4.1 Body Set carries that look in a ready-finished replacement shell. The set is made for the Virus 4.1 Brushless and combines the bodyshell with a matching rear wing, so the outer appearance can be renewed with parts that suit the model line. The shell comes pre-painted in black, red and neon green and uses a honeycomb graphic with tinted window details for a sharp race layout. Visible Virus 4.1 Brushless markings on the body connect the design directly to the series, while the wing adds the low, wide finishing touch at the rear. Small fitting parts are included in the set as body clips, screws and washers, supporting a straightforward refit with the matching hardware kept together. This makes the set useful when a worn shell needs replacing or when an existing chassis is being refreshed with the same visual identity. On the bench, the set suits rebuilds, repairs and visual overhauls of a Virus 4.1 Brushless model. Once fitted, the shell and wing restore the familiar track-ready appearance that defines the series in motion and at rest. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 Virus V21, body set, blue bodyshell
500801038€33.99
The 1:8 Virus V21 body set brings a fresh outer shell to the buggy with a blue finish, angular racing graphics and a separate rear wing that carries the same visual theme. Designed as a spare part for 500204036, the set focuses on the visible upper body assembly rather than the chassis underneath, making it a direct replacement when the original shell needs renewing. The main shell shows a low, streamlined profile with pronounced wheel arch cutouts, roof ridges and a dark windscreen area that reinforce the competition-inspired look. Blue, white, black and silver graphics run across both body pieces, while VIRUS markings on the shell and wing keep the model identity consistent. The included fixing parts cover the essential mounting points with 2 body clips, 2 screws and black wing hardware for the rear section. On a workshop bench, during a rebuild between running sessions or as part of a visual refresh before the next outing, this set restores the Virus V21 with the correct 1:8 body shape and matching wing layout. 14 Years is the stated age marking. Warning! Not suitable for children under 14 years.
Axles & drive shafts
Akuma Alu-hex Hub 17 mm RC Wheel Adapter
500405988€12.79
The Akuma Alu-hex hub 17 mm is a compact RC spare part set for wheel mounting and running gear service on compatible Akuma model vehicles. With 2 machined aluminium hub pieces, 2 matching nuts, 2 metal pins and 2 black set screws, the set brings together the fastening hardware needed for a complete hub replacement at the wheel end. The 17 mm hex format defines the wheel interface, while the threaded hub design and separate locking hardware point to a mechanical assembly that is secured in several steps rather than a simple push fit. The metal pins and set screws support alignment and retention within the hub setup, helping restore the intended connection between axle area and wheel mount when original parts are worn, lost or damaged. The silver finish keeps the parts easy to identify during bench work, and the compact format suits parts storage in an RC workshop or field box. This kind of hardware fits naturally into rebuilds, maintenance sessions and spare-parts stock for regular RC driving. Whether a model is being refreshed after heavy use or prepared with replacement wheel-end hardware before the next run, this set supplies the core mounting parts in one pack. Warning! Not suitable for children under 14 years.
RC chassis & attachments
Akuma Battery Holder Set, model accessory
500405984€27.99
The Akuma Battery Holder Set adds a dedicated battery mounting solution to the model layout with a long tray, matching cover plate and support brackets. Black moulded parts and a screw-fastened structure create a clean, component-based setup that suits hobby work on 14 Years+ models and keeps the battery area clearly organised. Alongside the main tray, the set includes a rectangular frame bracket with upright arms, a clamp-style bracket with mounting tabs and a side loop, a small spacer block, 6 black screws and 2 wide hook-and-loop straps. This combination supports a more tailored installation around the chassis area, with the straps wrapping the battery pack while the rigid parts define its position. The separate brackets also help adapt the holder to the available mounting points rather than relying on a loose battery placement. In workshop sessions, the set supports battery installation, refit work and replacement of worn holder parts on the Akuma. It also suits rebuilds where a clear, screw-mounted battery position is needed for a neat internal layout and repeatable pack changes between driving sessions. Warning! Not suitable for children under 14 years.
RC chassis & attachments
Akuma Bodyholder Kit, RC spare part set
500405983€6.59
The Akuma bodyholder kit is a dedicated RC spare part set for front and rear body mounting points, built to return the correct connection between chassis and bodyshell on the matching Akuma model. With a minimum age marking of 14 Years, it sits in the hobby and model-building range rather than general toy use. The set includes a structural holder piece, a mounting plate, 2 matching inserts and 2 screws. The black moulded parts are formed for mechanical fastening, with the plate using multiple mounting holes and the main holder section shaped to seat the inserts and secure the assembly. This layout supports a direct replacement of worn, damaged or missing bodyholder components without introducing unrelated parts. As a model supply in the Carson Modelsport range, the kit is aimed at maintenance work that keeps an RC vehicle ready for continued running. In workshop use, the parts suit routine repairs after body mount wear, impact damage or lost hardware. The front and rear application makes the set useful when restoring the shell position and attachment points so the vehicle can return to its intended fit and appearance. Warning! Not suitable for children under 14 years.
Additional spares
Akuma Chassis Stiffener, model spare part
500405987€6.49
Akuma and Virus model vehicles rely on accurately shaped chassis parts to keep a rebuild on track, and this 2-piece chassis stiffener set is made for the front and rear reinforcement positions named in the product data. The dark gray parts shown for this set use a long, narrow form with circular mounting holes at both ends and molded ribbing along the surface, giving the reinforcement area the correct component shape for replacement work. As spare parts for the chassis structure, these stiffeners are aimed at maintenance, repair and planned parts stocking rather than visual upgrades. The paired layout suits the stated front and rear use, while the molded channels and reinforcement ribs reflect the technical role of the parts within the chassis assembly. For model-building enthusiasts, that means a focused replacement set that addresses a specific structural section on compatible Akuma and Virus vehicles. In a workshop setting, the set fits naturally into rebuilds after wear, damage or routine inspection of the chassis area. The 14 Years marking is stated in the product data. For bench repairs or parts storage between running sessions, the 2 included stiffeners provide the named front and rear chassis reinforcement components. Warning! Not suitable for children under 14 years.
Wishbones
Akuma Lower Suspension Mount Kit, RC spare part
500405989€15.79
The lower suspension mount sits at a critical point in an RC chassis, where the wishbone holder and mounting geometry need to stay cleanly positioned for consistent assembly. This Akuma Lower suspension mount kit is made for the Carson Akuma and Virus platform and supplies 4 parts for that area, giving model-building enthusiasts the correct replacement set for service work or a rebuild. The set is described as a lower suspension mount kit and in the image shows multiple machined components with drilled holes, recessed fixing points and shaped cutouts that match chassis mounting tasks. These details matter during workshop use because the hole layout and part shape guide the components into their intended position within the suspension section. As a dedicated spare part rather than a general accessory, the kit focuses on one defined chassis function and keeps maintenance work specific to the compatible vehicle family. The visible mix of black and silver finished parts underlines the technical character of the set without adding unnecessary bulk to the assembly. In practice, this kind of replacement set fits naturally into routine RC ownership: worn or damaged suspension hardware can be exchanged during a repair session, and a chassis under rebuild can be brought back with matching lower mount components. The 14 years marking places the set in the hobby segment, where tuning, upkeep and precise parts changes belong to the driving experience as much as time on the track. Warning! Not suitable for children under 14 years.
RC chassis & attachments
Akuma Motorholder, model accessory mount
500405986€8.49
The Akuma Motorholder is a dedicated mounting part for the Akuma platform, built to secure the motor area with a precisely shaped metal bracket. Its rectangular form combines recessed fixing points with a large central opening and a U-shaped cutout, creating the clearances needed around the drive section while keeping the mount closely integrated with the surrounding assembly. The top face uses countersunk holes so the 5 included hex screws sit flush once fitted. Elongated slots add adjustment range during installation, which supports accurate motor positioning when replacing worn parts or rebuilding the drivetrain section. Three threaded side holes extend the mounting options for adjoining chassis elements, while the darker side walls and machined edges underline the technical character of this spare part. As a focused workshop component rather than a decorative add-on, the mount is shaped around fit, fastening and alignment inside the Akuma layout. This accessory suits bench repairs, routine maintenance and parts replacement on an Akuma model marked 14 Years and up. In a rebuild setup, the bracket forms a defined connection point for the motor section, helping keep the chassis assembly orderly and correctly aligned. Warning! Not suitable for children under 14 years.
Pinions & gears
Akuma Pinion Gear 14T Model Accessory
500405985€6.89
The Akuma Pinion Gear 14T is a drivetrain accessory for compatible Akuma model vehicles, built around a clear 14-tooth specification that helps identify the correct replacement or maintenance part within an RC setup. In workshop use, that concrete tooth count gives hobbyists a direct reference when checking an existing transmission configuration or preparing a repair. As part of the model supplies range, this gear suits routine servicing, parts organisation and planned spares stocking for RC vehicles in the Akuma line. The product data identifies it as a separate accessory rather than a complete vehicle, which makes it relevant for ongoing upkeep of a running model. The designation Motor Pinion 14T points to its role in the drive system, where a pinion gear forms part of the connection between motor output and the rest of the drivetrain. The listed references 500409082 and 500409083 link the gear to the Akuma context named in the data. On the hobby bench, a dedicated replacement gear helps keep maintenance focused and parts selection straightforward when an existing drivetrain needs attention. The 14 Years age marking is stated in the product data, placing this accessory in the model-building and RC hobby segment. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Akuma Steering Linkage, RC spare part, 2-piece
500405979€6.49
The Akuma steering linkage set supplies 2 grey linkage arms for RC vehicle steering assemblies, paired with 2 metal ball studs and 2 white bushings. Each arm has mounting holes at both ends, creating the connection points needed between moving steering components where a pivoting joint is required. The included ball hardware supports the linkage mechanism by allowing the arms to articulate at their mounting points instead of sitting in a fixed position. That movement is essential in steering systems where connected parts need to change angle during operation. The rectangular arm profile with rounded ends matches the technical layout shown for this spare part set, while the paired format provides matching left and right replacement pieces for the same assembly area. With assembly measured in minutes, the set suits routine workshop maintenance, parts replacement, or the refresh of a used RC chassis. In practical use, the linkage set fits repair work after wear, damage, or lost hardware in the steering area. It also serves as a useful stock spare for hobby benches where RC running sessions and regular mechanical upkeep go hand in hand. Warning! Not suitable for children under 14 years.
Additional spares
Akuma Steering Rack, model accessory, aluminum
500405990€8.49
The Akuma steering rack brings a key front-end control component into the workshop as an aluminum replacement part for Carson Akuma models. Its role sits directly in the steering assembly, where the rack forms the connection point for the linkage and supports the intended movement of the front wheels through the chassis layout. The part is described as an Alu steering rack and is intended as a model accessory within the Models & Accessories range. As a dedicated spare part rather than a universal fitting, it matches the Akuma designation named in the data and gives repair and maintenance work a clearly defined replacement for the steering area. The aluminum construction adds a specific material choice to this component, making it a relevant search term for hobbyists who maintain, rebuild, or refresh running gear parts. With the steering plate named in the source data, the part also speaks to focused servicing of the control hardware rather than a general upgrade bundle. In practical use, this kind of replacement belongs on the bench during routine maintenance, after wear in the steering mechanism, or when a build needs the correct Akuma-specific part to return the front end to working order. The 14 Years age marking is stated in the product data. Warning! Not suitable for children under 14 years.
RC tires & rims
Alu Hex Hub 17 mm, RC wheel hub set
500405896€13.49
Small drivetrain parts can make a decisive difference in an RC build, and this Alu Hex Hub set brings a clear mechanical upgrade point with 17 mm wheel mounting hardware. The set includes 2 blue anodized aluminium hub adapters with a hexagonal base and threaded body, giving model builders a defined interface for wheel fitment and axle connection. Each adapter is paired with a matching hex nut, while the included silver pins and black set screws complete the fastening hardware for installation. The hollow cylindrical opening and side hole shown on the hub design indicate a locking layout built around pin retention and screw fixing rather than a simple push fit. That construction supports controlled assembly work when worn parts need replacing or a compatible setup is being refreshed. With 2 hubs in the pack, the set is suited to targeted repair work on one axle position. On the workbench, the compact format keeps the focus on accurate fitting, clean fastening, and dependable mechanical engagement between axle and wheel mount. The 14 years+ age marking places the set in the hobby segment, where tuning, maintenance, and parts changes are part of the hands-on appeal of RC model ownership.
Ball bearings
Ball bearing 10x15x4, model accessory, 10-pack
500904019€13.99
Small precision parts make a visible difference in model mechanics, and this set brings 10 ball bearings in the 10 x 15 x 4 mm size for compact rotating assemblies. The metal bearings suit hobby work from 14 years and up where exact dimensions are needed for replacement, maintenance, or fresh installation in a model setup. Each bearing uses the stated 10 mm inner diameter, 15 mm outer diameter, and 4 mm width format, giving a clear reference for matching existing bearing seats and axle points. The pack count of 10 supports workshop stock as well as multi-point servicing on a single build. In model applications, ball bearings are used where shafts and rotating parts need guided movement inside a tight mechanical layout. The compact format makes them relevant for assemblies where space around the axle or housing is limited. This set works well for planned repair sessions, parts replacement after wear, or keeping matching spares ready alongside other model supplies. The uniform size across all 10 bearings helps maintain consistency when several positions in the same assembly require the same specification. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 3x6x2,5, model accessory
500904001€13.99
This 3x6x2,5 ball bearing set brings a core workshop consumable into model maintenance with 10 matching bearings for repairs, rebuilds and routine parts replacement. The compact format suits assemblies that rely on small rotating hardware, and the metal construction matches the technical character expected in model servicing. The 10-piece count gives a useful reserve for ongoing bench work, whether a single bearing needs changing or several matching points in one assembly are being refreshed together. The supplied storage tubes help keep the bearings grouped by size between jobs, which is especially useful when a work area already holds screws, axles and other small hardware. With one clearly defined bearing size, the set stays focused on compatibility for applications that require 3x6x2,5 dimensions rather than mixing formats in one pack. On an RC or model-building bench, these bearings fit naturally into regular upkeep, from replacing worn running parts to preparing spares before a rebuild starts. The set also suits organised parts storage, where clearly separated small components speed up maintenance and reduce time spent sorting through mixed hardware. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 3x7x3, model accessory, 10-pack
500904002€13.99
Ball bearings are a core detail in model mechanics, and this 10-pack brings the exact 3 x 7 x 3 mm size into the workshop for precise replacement and setup work. The compact format suits small rotating assemblies where clean running and an accurate fit matter, whether the bearing is used in a fresh build or during routine maintenance. Each bearing is a metal component designed for model applications that rely on controlled rotation at compact mounting points. The pack of 10 supports repeated service jobs, keeps matching spares together and helps maintain consistency across assemblies that use the same dimension. The 3 mm inner diameter, 7 mm outer diameter and 3 mm width make the size easy to match against existing parts before installation. This makes the set useful for hobby benches where exact dimensions guide part choice more than broad category labels. In practice, the bearings fit naturally into repair sessions, rebuilds and parts organisation for model projects from 14 years. Stored as a dedicated size set, they are ready when a worn bearing needs replacing or when a mechanical assembly calls for the same format at several rotating points. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 4x8x3, RC spare part, 10-pack
500904004€13.99
Small bearings make a big difference wherever rotating parts need a clean, precise running action. This 10-piece set of ball bearings in 4 x 8 x 3 mm format brings a compact spare-parts solution to model building, workshop upkeep and routine replacement work on hobby machines. Each bearing is sized for fine mechanical assemblies where limited space calls for a compact outer diameter and a slim 3 mm width. The metal construction suits repeated installation in small rotating points such as hubs, shafts or axle-mounted components, where reduced friction supports smoother movement than a plain bushing setup. With 10 matching bearings in one pack, the set also helps keep servicing consistent across multiple positions in the same build instead of mixing different sizes. The format works well for restocking a pit box, organising a parts drawer or preparing a rebuild bench before maintenance starts. Whether the task is replacing worn running gear bearings or keeping fresh spares ready for the next repair session, the 4 x 8 x 3 mm size gives model-building enthusiasts a clear, exact reference for compatible mechanical jobs. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 4x9x4, model accessory, 10-pack
500904005€13.99
Ball bearings are a core part of smooth-running model mechanics, and this 10-pack in 4x9x4 mm format supplies a compact, exact-size solution for hobby builds, servicing tasks, and part replacement. The metal construction suits rotating assemblies where a small bearing is needed to guide shafts or axles with a clean, precise running action. Each bearing measures 4x9x4 mm, making the set useful wherever this specific inner diameter, outer diameter, and width are required in a model setup. With 10 matching bearings in one pack, several mounting points can be equipped in one session, or spare pieces can stay ready for later maintenance. The format shown in the product data focuses on a miniature bearing size often used in detailed mechanical layouts rather than large hardware applications. In the workshop, the set supports routine replacement of worn running parts, careful rebuilding of compact assemblies, or stocking common service components for future projects. The age marking of 14 years and up matches the small-part character of this accessory and the precise handling involved in model-building and repair work. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 5x10x4, RC spare part, set of 10
500904008€13.99
Ball bearings are among the smallest parts in a model, yet they shape how smoothly a drivetrain or rotating assembly works. This set contains 10 shielded ball bearings in 5 x 10 x 4 mm size, giving model builders a precise spare part for compatible RC and mechanical applications. The compact format suits installations where a clean seat and controlled rotation matter. Each bearing uses an inner ring, outer ring and shielded sides to support guided movement at matching mounting points. In model workshops, parts in this size can be used at axles, transmission points or other rotating assemblies where the specified dimensions are required. The pack of 10 also makes the set practical for routine maintenance, since several positions on one model can call for matching bearings. Whether used to replace worn parts or to stock the bench for future service work, the set adds a useful supply of identical running components. For hobbyists working on RC vehicles and model mechanisms, exact dimensions such as 5 x 10 x 4 mm are the key detail for selecting the right bearing for the job. Warning! Not suitable for children under 14 years.
Ball bearings
Ball bearing 5x11x4, model accessory, 10-pack
500904009€13.99
Ball bearings are among the smallest parts in a model build, yet they shape how a drivetrain, axle or transmission feels in motion. This set provides 10 shielded ball bearings in 5 x 11 x 4 mm format for model applications that rely on clean, controlled rotation. The metal bearings are suited to rotating assemblies such as shafts, wheel mounts and gearbox positions where a matching size is required. Their compact dimensions make them useful for replacement work on worn running gear as well as for fresh assembly projects that call for this exact bearing format. In workshop use, a pack of 10 gives a practical quantity for servicing several mounting points within one vehicle or for keeping spares ready between rebuilds. The shielded design supports tidy running in enclosed mechanical areas where dependable movement matters. With age marking 14 years+, the set fits hobby-focused model work rather than entry-level play use. Whether the task is restoring freer movement to a used chassis, refreshing a transmission during maintenance, or stocking the bench with essential wear parts, these 5 x 11 x 4 mm bearings add a precise mechanical component that belongs in regular model service. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 5x8x2.5 mm, Model Spare Part
500904006€13.99
This set of 10 ball bearings in 5 x 8 x 2.5 mm brings a precise spare-part format to model maintenance and compact mechanical assemblies. The small metal bearing size suits applications where a matching inner diameter, outer diameter and width are needed to restore clean rotation in a confined space. Loose bearings are shown alongside clear storage tubes, keeping the matching parts grouped between workshop sessions and making it easier to keep identical replacements on hand. In hobby models and RC running gear, miniature bearings of this size can be used wherever a rotating shaft needs guided support inside a compact housing. The metal construction fits the technical character of repair benches, parts boxes and regular servicing routines. With 10 identical pieces in one pack, the set also supports replacing several wear points with the same dimension rather than mixing sizes. The 5 x 8 x 2.5 mm format suits careful rebuilds, routine maintenance and stocking up on frequently used spares for model work. Age marking: 14 years and up. Whether the task is refreshing a rolling assembly or preparing backup parts for future repairs, this bearing set adds a clear, exact dimension to the workshop drawer. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 5x9x3, model accessory, set of 10
500904007€13.99
Small bearings make a big difference wherever rotating parts need clean, controlled movement. This set contains 10 ball bearings in 5 x 9 x 3 mm format, giving model-building enthusiasts a compact replacement or workshop supply for mechanical assemblies that rely on accurate shaft support. The 5 mm inner diameter, 9 mm outer diameter and 3 mm width suit installations where space is limited and the fit has to match existing hubs, axles or transmission points. As metal rolling bearings, they are intended for positions where fixed bushings are not the right match and a dedicated bearing is required instead. The pack of 10 supports full maintenance jobs, partial rebuilds or keeping matching spares ready for future service work. Their small format also makes them relevant for several rotating points within the same model rather than a single repair location. On the workbench, these bearings suit careful replacement tasks in hobby models and accessories with compact running gear or drivetrain layouts. During servicing, the defined dimensions help when matching worn parts to the correct size, while the 10-piece quantity leaves room for repeated use across ongoing workshop projects. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 6x10x2.5, RC spare part, 10-pack
500904010€13.99
Small running parts make a clear difference in model engineering, and this set of 10 ball bearings brings a precise 6 x 10 x 2.5 mm format to repair, replacement and workshop stock. The open version without seal suits builds and maintenance jobs where the bearing layout itself is part of the required fit. Each bearing is sized with a 6 mm inner diameter, 10 mm outer diameter and 2.5 mm width, giving hobbyists a defined format for mechanical assemblies that rely on closely matched dimensions. The pack of 10 supports work across several mounting points instead of limiting a project to a single replacement. In RC and model applications, bearings like these are typically used where rotating parts need clean, consistent movement within a compact installation space. The metal bearing construction shown in the product presentation underlines the technical character of this spare-parts set. Whether the task is refreshing a used model, replacing worn running hardware or keeping core workshop supplies ready between builds, this bearing set fits naturally into the parts box. The compact size and multi-pack quantity also suit planned servicing where several identical bearings are needed within the same assembly. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 8x12x3.5, spare part, set of 10
500904015€13.99
Ball bearings are core running components in model mechanics, and this set provides 10 matching pieces in an 8 x 12 x 3.5 mm size for repair, maintenance and parts replacement. The compact metal format suits assemblies that rely on controlled rotation and a precise seat inside the surrounding mechanism. Each bearing uses an inner ring, outer ring and ball race construction to support rotating shafts while reducing direct sliding contact between parts. That makes this set a practical choice for hobby benches where wheel carriers, transmission points or axle-mounted components need fresh running hardware. The 10-piece quantity also helps when several positions in one model use the same size, or when spare bearings are kept ready for later service intervals. On a workbench, the set supports rebuilds, routine servicing and targeted replacement of worn bearings in model vehicles and related hobby mechanisms. The 14 Years age marking places it within the hobby and model-building range, where precise small parts belong alongside planned maintenance and careful installation. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 8x16x5, RC spare part, set of 10
500904017€13.99
Ball bearings are among the smallest parts in an RC build, yet they have a direct effect on how cleanly moving assemblies run. This set provides 10 metal ball bearings in 8x16x5 mm size, giving model-building enthusiasts a clearly defined spare part for service work, replacements and workshop stock. The 8 mm inner diameter, 16 mm outer diameter and 5 mm width make the format easy to match to an existing assembly when a worn bearing needs to be exchanged. The circular metal construction is suited to rotating mounting points where low-friction movement matters, and the quantity of 10 supports multiple replacement points within one model or across several hobby projects. The close-up product image shows a compact, silver-coloured miniature format with enclosed bearing faces, consistent with precision parts used in RC drivetrains and rolling assemblies. In regular workshop use, a pack like this fits naturally into rebuild sessions, routine maintenance and parts-box organisation. It can be kept ready for axle carriers, wheel mounts, transmission points or other compatible mechanical locations that require the exact 8x16x5 mm specification. Age marking: 14 years and up Warning! Not suitable for children under 14 years.
RC chassis & attachments
Body Pins 14 mm, RC model fasteners, 10 pcs
500908058€3.79
Small fastening parts make a clear difference in RC model upkeep, and these black body pins are built for exactly that workshop role. The pack contains 10 clips in a 14 mm size, giving model builders a practical stock of matching retainers for body shell mounting and routine replacement. Each pin uses a bent wire clip form with a looped top and crossed prongs, the familiar mechanism that slides through a body post hole and locks the mounted section in place. That simple shape supports quick handling when a shell needs to come off for access to the chassis area or go back on after maintenance. Keeping several identical clips on hand also helps maintain a uniform fit across compatible mounting points instead of mixing different spare parts. In the workshop, at the bench or in the field box, a 10-piece pack covers the small losses that often interrupt running sessions. The black finish keeps the hardware discreet on many body styles, while the compact format suits RC vehicle maintenance where secure, removable fastening is needed. Age 14 Years Warning! Not suitable for children under 14 years.
RC chassis & attachments
Body Pins 20 mm, RC body clips, 10-piece set
500908059€3.79
Body pins are among the smallest parts in an RC setup, yet they handle one of the most repeated tasks at the bench and at the track: keeping the body shell fixed to the chassis posts. This 10-piece set from Carson Modelsport supplies black 20 mm retaining clips for that exact fastening job on model vehicles. Each clip is formed from bent metal wire in the familiar crossed retaining shape that slides through a hole in a body post or mounting pin and holds by spring tension. That simple mechanism keeps the shell attached while still allowing fast removal when access to the chassis is needed. The black finish gives the set a uniform look across matching hardware, and the pack of 10 supports regular replacement when clips go missing in transport, setup, or running sessions. With multiple identical clips in one pack, workshop drawers, field boxes, and spare-parts cases can stay stocked for routine maintenance. These retaining clips suit hobby use wherever removable bodywork is fixed with body posts and clip fasteners. They work well as replacement hardware for worn or misplaced shell clips and as backup stock for race days, tuning sessions, or general RC maintenance at the workbench. Warning! Not suitable for children under 14 years.
RC chassis & attachments
Car Body X-Crawlee 3.0
500800113€45.99
Carson 1:10 Body X-Crawlee 3.0 (material number 500800113) is the body for the X-Crawlee 3.0 in 1:10 scale and is aimed at model building enthusiasts who want to renew their vehicle true to the original or change its appearance. Ideal for collectors and tuners who value attention to detail. Perfect for replacing damaged bodies or for customizing your model. Warning! Not suitable for children under 14 years.
Ball bearings
CC-01 Ball Bearing Set, model accessory, 18pc
500904029€22.49
The CC-01 platform is known among RC enthusiasts for its mix of scale character and mechanical involvement, and this ball bearing set targets that layout with 18 bearings sized for the chassis. As a model accessory rather than a vehicle in its own right, it focuses on one clear task: replacing friction-heavy rotating points with shielded metal bearings that support cleaner, more efficient movement. Within an RC drivetrain, a ball bearing carries the shaft on rolling elements instead of a plain sleeve, which changes how the transmission, axles and wheel assemblies turn under load. On a CC-01 build or rebuild, that means the relevant mounting points can spin with less drag and a more consistent feel across the chassis. The mixed bearing sizes shown in the set reflect the different diameters used around the platform, so the assortment is aimed at the actual bearing seats rather than a generic hardware supply. For workshop routines, the 18-piece count keeps the conversion focused and complete for the intended locations. This set fits naturally into maintenance sessions, fresh chassis builds and running upgrades where smoother rotation and more precise mechanical support matter. Age marking: 14 Years. Warning! Not suitable for children under 14 years.
Ball bearings
CC-02 Chassis Ball Bearing Set, model accessory
500904063€27.99
The CC-02 chassis uses multiple rotating points across its transmission and axle layout, and this ball bearing set is built to replace those wear components with 22 precision-made metal bearings matched to that platform. The mixed sizes shown in the set support the different bearing seats used within the CC-02 chassis, giving model-building enthusiasts a focused upgrade for smoother mechanical operation. Instead of relying on plain bushings, the bearing design supports freer rotation at the points where shafts and driven parts turn inside the chassis. That can help the drivetrain run with less drag during regular use and gives maintenance work a more exact, component-based approach. The set combines 16 bearings of one size with 6 additional bearings in other sizes, reflecting the varied mounting positions found in the chassis layout. For rebuilds, servicing or a fresh parts refresh, that model-specific spread keeps the upgrade aligned with the actual hardware used in the vehicle. In workshop sessions, the set fits naturally into routine maintenance, from replacing worn running parts to preparing a chassis for cleaner, more efficient rotation. It also suits hobby benches where a CC-02 build is being refined with dedicated spare parts chosen for the platform rather than generic hardware.
Axles & drive shafts
Center Differential 46T, RC spare part
500405592€41.99
A center differential sits at the heart of an RC drivetrain, balancing power flow between the front and rear sections as the model accelerates, brakes and changes direction. This complete 46T assembly is designed as a direct spare part for selected Carson platforms, giving model-building enthusiasts a defined replacement for the center transmission area. The unit combines a differential housing, a 46-tooth ring gear, output cups and collars in one assembled component. That complete format matters when an existing drivetrain part shows wear, because the replacement can focus on the full center diff rather than on separate small parts. The gear assembly is intended for Carson Virus 4.0, 4.1, 4.2, 4.3 and Race models, and it also fits Akuma versions named in the product data. Within those platforms, the center differential helps distribute rotational force through the drivetrain while allowing the front and rear ends to turn at different rates when the running surface changes. In workshop use, this kind of spare part supports maintenance after heavy running sessions, drivetrain servicing or a rebuild of the center transmission section. The 14 Years age marking is stated in the product data. For hobby benches focused on keeping a Virus or Akuma model ready for the next outing, a model-specific center differential like this keeps the replacement process tied to the intended vehicle family. Warning! Not suitable for children under 14 years.
Axles & drive shafts
Center Drive Shafts, RC spare part, 2 pcs
500405767€16.79
Center Drive Shafts, 2 pcs. is a dedicated RC spare part set for compatible Carson Virus and Akuma vehicles. The set contains 2 centre drive shafts and is intended for drivetrain service on models where the original shafts need replacement after regular use. Compatibility is clearly defined for Virus 4.0, 4.1, 4.2, 4.3 and Race versions, covering the model numbers 500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086 and 500409087. It also fits Akuma models 500409082 and 500409083. The image shows 2 black shaft components in different lengths, each with rounded ball ends and metal pins, a layout suited to the connection points used in RC drivetrain assemblies. For hobby workbench maintenance, a model-specific spare part saves guesswork during service and supports a clean replacement process in the centre drivetrain area. Age marking: 14 years. No batteries are included. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
DESERT W. 4X Front Shock Set, RC spare part
500405485€54.99
The DESERT W. 4X Front Shock Set is a dedicated RC spare part for the X10E Desert W. 4x, built around 4 matching coil-over dampers for the front axle. Silver shock bodies, white springs, blue adjustment collars and black lower mounts give the set a clear workshop look while keeping the suspension layout consistent across the vehicle's front end. Each damper combines a spring and shock unit in one assembly, with threaded bodies that support preload adjustment through the collars. That setup gives model-building enthusiasts a practical way to tune the front suspension around the chassis layout and the running surface. Polished shafts and eyelet-style lower mounts point to a conventional RC installation pattern, while the included retainers, screws and lock nuts complete the fastening hardware for the set. In workshop use, the 4-piece layout suits a full front-end refresh on the X10E Desert W. 4x rather than replacing a single worn damper. On loose ground, uneven tracks and jump sections, the assembled shock units support more controlled suspension movement at the front of the vehicle. Age 14 Years Warning! Not suitable for children under 14 years.
Screws
Drakuro Ball Studs, model spare part set
500406066€6.49
The Drakuro Ball Studs set is a dedicated spare part for the 1:8 4WD Drakuro chassis and targets one of the small but essential connection points in the running gear. Ball studs sit at moving linkages where clean articulation matters, so replacing worn hardware can help bring back accurate mechanical response in the chassis layout. The set is listed for the Drakuro BL 3S platform and matches the anthracite/red 500409096 and blue 500409097 versions named in the data. With 4 ball studs plus 2 additional pieces, the pack provides a defined quantity for repair work rather than a generic mixed hardware selection. That makes it useful for planned maintenance, for replacing damaged linkage points after demanding runs, or for keeping the correct small parts on hand in the workshop. As a model spare part, the focus stays on fit within the named platform instead of broad compatibility claims. In practical use, this set suits bench repairs when steering or suspension connections need fresh hardware on the Drakuro chassis. It also fits neatly into a spares collection for 1:8 4WD running sessions, where the right replacement part can keep maintenance work focused and efficient. Warning! Not suitable for children under 14 years.
Additional spares
Drakuro Battery Holder, RC spare part
500406041€8.49
The Drakuro battery holder and centre differential cover are replacement parts for the 1:8 4WD chassis and address 2 core areas of the vehicle layout: battery retention and protection around the centre differential. The set is intended for maintenance work where original chassis parts are worn, damaged, or missing. The battery holder supports the correct placement of the battery within the chassis, while the centre differential cover restores the matching cover section in the drivetrain area. This makes the set useful for repairs after intensive running sessions as well as for planned workshop servicing. The designation in the data links these parts to Drakuro BL 3S variants, including Anthracite/Red and Blue versions, which helps place the spare within the Drakuro range without implying additional contents. In the workshop, these parts fit naturally into routine chassis maintenance, rebuild projects, and the replacement of used hardware on a 1:8 4WD platform. For model-building enthusiasts, a correctly matched spare part keeps the vehicle configuration consistent and supports continued running with the intended chassis structure. Warning! Not suitable for children under 14 years.
Pinions & gears
Drakuro Bevel Gears, drivetrain spare part
500406063€12.99
This spare part set is built around a clear drivetrain task: bevel gears for the center, front and rear drive shafts of the Drakuro 1:8 4WD chassis. With 2 pieces in the set, it covers a defined transmission area for maintenance work on the named vehicle platform and keeps the replacement focused on the parts that matter for this section of the drive layout. The fitment information is specific to the Carson Drakuro BL 3S variants 500409096 in Anthracite/Red and 500409097 in Blue. That makes the set a precise choice for model-building enthusiasts working on those versions rather than a generic gear listing with unclear application. In a 4WD layout, the center and axle drive sections depend on correctly matched drivetrain parts, so a dedicated bevel gear set helps keep servicing work aligned with the original chassis design. The short format also suits workshop storage, where model-specific replacement parts are easier to sort and identify during rebuilds. Whether the task is routine maintenance, replacing worn transmission parts, or preparing spares for future running sessions, this set supports focused repair work on the Drakuro platform. It fits naturally into a bench setup for RC maintenance, where chassis-specific parts save time when the drivetrain needs attention. Warning! Not suitable for children under 14 years.
RC chassis & attachments
Drakuro Body Mount Set, spare part for 1:8 RC
500406045€10.49
The Drakuro body mount set with lower control arm holder is a dedicated spare part package for the 1:8 4WD chassis used by the Drakuro BL 3S range. It addresses 2 concrete mounting areas named in the data: the body mount and the lower control arm mount, both central to keeping the shell position and suspension attachment aligned on the vehicle. The fit reference in the data points to 2 specific versions, the Drakuro BL 3S Anthracite/Red 500409096 and the Drakuro BL 3S Blue 500409097, which keeps compatibility tied to the stated models rather than a broad guess across unrelated platforms. As a replacement set, these parts are suited to repair work after impacts, rollovers or general wear on a hard-driven buggy or truggy chassis. Replacing damaged mounting hardware can help restore the original position of the body posts and the lower arm fixing area, so the surrounding chassis components can be reassembled on the intended points. In workshop use, this kind of spare part set fits naturally into routine maintenance between running sessions or during a larger rebuild of the 1:8 4WD platform. It gives model-building enthusiasts a direct route to replace the named holders and mounts on the Drakuro BL 3S without relying on improvised universal parts.
RC chassis & attachments
Drakuro Body Set, model accessory, anthracite
500406073€55.99
The Drakuro body set in anthracite brings a fresh outer shell to the model with integrated lights and a sharp anthracite and red colour layout. As a dedicated body kit, it changes the vehicle's appearance through the shell itself rather than through drivetrain or chassis parts, making it a focused choice for visual restoration or a new look on an existing build. This set is listed as a body kit with lights and is identified for the Drakuro range. The colour combination pairs a dark anthracite base with red sections that create clear contrast across the body shape. The product data also references a 1:8 4WD chassis, which places the shell in a large-scale RC context with the broad stance and presence associated with that class. Because the set is a body-focused accessory, it suits rebuild work after wear to the original shell and also supports custom projects that need a replacement body with a defined colour scheme already specified. On the workbench, the shell gives a model a clear visual reset before the next running session. Fitted to a compatible setup, the integrated lights and contrasting finish help the Drakuro stand out whether the model is prepared for display, maintenance or time on the track. Warning! Not suitable for children under 14 years.
RC chassis & attachments
Drakuro Body Set, RC bodyshell, blue 1:8
500406074€55.99
The Drakuro body set in blue brings a fresh bodyshell and integrated lighting to a 1:8 RC setup, giving a large-scale 4WD chassis a clear visual update with one matched shell package. The combination of colour and lighting creates a more defined presence on the bench, in the workshop and during running sessions where body details matter as much as the drivetrain underneath. As a body set, this version focuses on the outer shell rather than the rolling platform, making it a useful choice when an existing chassis needs a replacement body or a second look for a different setup. The blue finish provides a ready-made base for hobbyists who prefer a clean factory-style appearance instead of starting from an uncoloured shell. Integrated lighting adds another visible component directly to the body package, so the shell carries more than surface styling alone. The 1:8 format places it in the larger RC class, and the stated 4WD chassis fit keeps the application tied to that drivetrain layout. In a workshop setting, the shell can serve as a rebuild part for a used vehicle or as an alternate body kept ready for the next outing. On a display shelf or at a club meet, the blue bodyshell and lighting give a finished RC model a more complete large-scale presentation. Warning! Not suitable for children under 14 years.
RC chassis & attachments
Drakuro Box Covers, RC Chassis Accessory
500406039€8.49
Drakuro box covers and wheelie wheel add model-specific replacement parts for the Carson Drakuro 1:8 4WD chassis. The set is aimed at RC hobby work where the correct fit for an existing platform matters, bringing together the parts named in the data for maintenance, repair or rebuild tasks on the matching chassis. The BasicText identifies the compatible Drakuro BL 3S chassis variants in Anthracite/Red and Blue, which helps place these parts within the Drakuro range. As model supplies rather than a complete vehicle, the focus stays on keeping an existing RC setup in running condition with the right rear-area components. Box covers and a wheelie wheel serve different functions on the chassis, so having them grouped in one set supports planned replacement work without mixing in unrelated hardware. The 1:8 scale reference belongs to the chassis platform these parts are made for, giving RC enthusiasts a clear compatibility anchor. In workshop use, this set fits routine servicing after heavy running sessions, rebuilds of a used chassis, or preparation of a Drakuro BL 3S for the next outing. It also suits spare-parts storage for hobby benches where model-specific components are kept ready for the matching 4WD platform. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Drakuro Bumper Braces, RC spare part set
500406036€8.49
The Drakuro Front & rear bumper braces are a model-specific spare part set for the Drakuro 1:8 4WD chassis. Designed for the bumper strut positions at the front and rear, they give RC enthusiasts a direct replacement option for the designated mounting areas on the vehicle. The set is linked in the product data to the Drakuro BL 3S versions in anthracite/red and blue, which helps place these braces within the correct model family. As front and rear components are covered together, workshop planning stays straightforward when both ends of the chassis need matching replacement parts. This kind of model-specific hardware matters when maintaining the structure around the bumper assemblies and keeping the chassis configuration aligned with the intended layout. In the workshop, these braces suit repair jobs after impact damage, routine parts replacement, or the refresh of a heavily used RC vehicle. They also fit rebuild projects where worn bumper struts are exchanged during chassis maintenance, helping return the Drakuro platform to running condition with the correct spare parts category for the model. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Drakuro Bumper Lower Parts, spare part set
500406037€6.49
Drakuro Front & rear bumper lower parts are replacement components for the lower bumper sections of the Drakuro 1:8 4WD chassis. The set is aimed at precise maintenance work where the original lower front and rear bumper areas need to be renewed, keeping the vehicle configuration consistent with the matching chassis layout. Because the data identifies these parts specifically as lower sections, the repair can stay focused on the exact area rather than replacing unrelated assemblies. That makes the set useful for rebuilds, routine servicing, or restoring the bumper structure after running wear. The pairing of front and rear pieces also covers both ends of the chassis in one matching spare parts set, which helps keep the vehicle's setup visually and mechanically consistent. In the workshop, these parts suit planned maintenance as well as direct replacement during a chassis refresh. For hobby benches that keep model-specific spares ready, the set adds a clearly defined Drakuro component for the 1:8 4WD platform. Warning! Not suitable for children under 14 years.
Pinions & gears
Drakuro Center Differential, RC spare part
500406067€41.99
The center differential with spur gear is a dedicated drivetrain spare part for the Drakuro platform from Carson Modelsport. Listed for the 1:8 4WD chassis and described as a center differential with main gear, it targets the transmission area where power is managed within the named vehicle layout. As a models supplies component, this part is intended for repair, servicing, or replacement work on the specified chassis rather than as a universal fitment. The data links it directly to the Drakuro BL 3S series, including the Anthracite/Red version 500409096 and the Blue version 500409097, which helps place the part within the correct vehicle family. The combination of center differential and spur gear identifies a core drivetrain assembly used in the middle section of the chassis. In workshop use, this kind of replacement part supports planned maintenance after regular running sessions or the renewal of worn transmission components on the matching Drakuro model. For hobby benches focused on keeping a 1:8 4WD vehicle ready for the next outing, the named chassis reference gives a clear platform match.
Axles & drive shafts
Drakuro Center Driveshaft, RC spare part
500406059€6.49
The Drakuro Center driveshaft short is a dedicated RC spare part for the drivetrain of a 1:8 4WD chassis. With its specified 55 mm length, it is intended for the matching center shaft position in the Carson Drakuro layout, where accurate fit matters for the connection between drivetrain components. In a running model, the center driveshaft links key transmission sections and passes drive through the chassis as the power system works under load. Replacing a worn or damaged shaft with the correct version helps keep the drivetrain layout consistent and avoids guesswork during maintenance. The part is listed in the Drakuro range context alongside the BL 3S vehicle variants, which makes it a useful reference component for repairs within that platform. On the workbench, this spare part suits routine servicing, targeted replacement and rebuild jobs where the exact shaft length is needed. It fits naturally into workshop stock for hobbyists maintaining a 1:8 4WD RC vehicle and looking for the correct Drakuro transmission component. Warning! Not suitable for children under 14 years.
Axles & drive shafts
Drakuro Center Driveshaft, RC spare part
500406060€10.49
The Drakuro Center driveshaft long is a dedicated RC spare part for the drivetrain of the Carson Drakuro BL 3S platform. With a length of 142 mm, it is specified for the long center shaft position in the compatible 1:8 4WD chassis and gives model-building enthusiasts a clearly defined replacement for maintenance and repair. Within a 4WD layout, the center driveshaft forms part of the connection between major drivetrain sections, making correct fit and matching length essential when worn transmission parts are replaced. This version is assigned to Carson model numbers 500409096 Drakuro BL 3S Anthracite/Red and 500409097 Drakuro BL 3S Blue, which keeps compatibility clear when servicing the chassis. The part is intended for model supplies and workshop use rather than as a general universal shaft, so the stated 142 mm dimension is the key reference for selection. It fits routine repair work after drivetrain wear, as well as planned parts stocking for an existing Drakuro BL 3S. In a hobby workshop, a model-specific replacement like this helps return a 1:8 4WD chassis to its intended running condition with the correct shaft format for the designated position. Warning! Not suitable for children under 14 years.
Additional spares
Drakuro Chassis Center Brace, chassis part
500406061€8.49
The Drakuro Chassis Center Brace is an aluminum center strut created for chassis stiffening on compatible 1:8 4WD Drakuro models. Its red anodized finish gives the part a crisp workshop look while the brace itself focuses on the middle section of the vehicle, where extra rigidity can support a more defined chassis response during running and tuning. Designed as a dedicated chassis part rather than a general accessory, this brace addresses one specific structural point in the layout. The aluminum construction suits the mechanical role of a center strut, and the anodized red surface makes the upgrade easy to identify during maintenance or rebuild work. Compatibility in the provided data points to the Drakuro BL 3S anthracite/red 500409096 and the Drakuro BL 3S blue 500409097, giving model-building enthusiasts a clear match within the range. Because the part is intended for 1:8 4WD chassis use, it sits naturally within larger off-road RC setups where the center section plays a key role in overall chassis balance. On the bench, the brace suits focused upgrade work on an existing Drakuro platform. At the track or on rough running surfaces, a stiffened center section can help keep the chassis layout more consistent under load, making this part a purposeful addition for hobbyists refining a compatible 1:8 4WD model. Warning! Not suitable for children under 14 years.
Pinions & gears
Drakuro Differentials Front and Rear Set
500406065€49.99
The Drakuro differential set covers both key drivetrain positions with 2 units for the front and rear of the chassis. Named in the data as Drakuro Differentials front and rear, this spare part set is aimed at 1:8 4WD running gear where the transmission layout depends on a differential at each axle. Within a 4WD chassis, the differential is the component that distributes drive across the axle while the model is under power. Replacing worn transmission parts can restore the mechanical basis the chassis was designed around, especially when both axle positions are serviced together rather than one side at a time. The set format keeps the front and rear assignment clear and suits maintenance work focused on the drivetrain rather than body or electronics parts. The product data identifies the pair specifically for the Drakuro platform, making the application more precise than a generic RC spare. This kind of replacement set fits naturally into workshop stock for repair, scheduled servicing, or rebuilding a used chassis. For hobbyists working on a Drakuro 1:8 4WD model, the 2-piece layout provides the core differential parts needed for the front and rear transmission positions in one purchase.
Axles & drive shafts
Drakuro Drive Cups, RC spare part, 1:8 4WD
500406062€12.99
This Drakuro Drive Cups set is a dedicated RC spare part for the centre driveshaft on the 1:8 4WD chassis named in the product data. Supplied as 2 pieces, it is intended for the front and rear positions where the centre driveshaft connects into the drivetrain layout. The set is listed for the Carson Drakuro BL 3S variants 500409096 in anthracite red and 500409097 in blue, which gives model-building enthusiasts a clear chassis reference when selecting replacement parts. Rather than covering a broad range of unrelated fittings, this spare focuses on one defined transmission component group. That makes parts planning more straightforward during routine maintenance, wear replacement, or a targeted drivetrain refresh on the specified platform. In the workshop, dedicated replacement parts help keep servicing organised around the exact chassis architecture already in use. For rebuilds after heavy running sessions or for keeping spares ready between maintenance intervals, these 2 drive cups fit naturally into a parts box built around the Drakuro 1:8 4WD range. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Drakuro Front & Rear Bumper, spare part
500406035€8.49
The Drakuro Front & rear bumper is a dedicated spare part set for the Carson Drakuro model family. Listed for the 1:8 4WD chassis and the Drakuro BL 3S versions in anthracite/red and blue, it provides the matching bumper components for both ends of the vehicle. Because the set covers front and rear positions together, repair work can focus on the impact areas that see regular contact during RC driving. The bumper layout stays aligned with the named Drakuro platform rather than relying on an unspecified universal part. That makes this set a practical choice for maintenance, rebuilds and parts replacement within the correct model range. The reference to the 1:8 4WD chassis also places the part within the larger Drakuro running gear setup without overstating compatibility beyond the data. In the workshop, this spare part set supports routine servicing after collisions, rollovers or general wear. It also fits restoration work on a used Drakuro BL 3S when both vehicle ends need fresh matching components to bring the chassis back into running condition. Warning! Not suitable for children under 14 years.
Axles & drive shafts
Drakuro Front Cardan Shafts, RC spare part
500406053€20.99
The Drakuro Front Cardan Shafts set supplies 2 replacement shafts for the front drivetrain of the Drakuro 1:8 4WD chassis. As a dedicated RC spare part, it focuses on one specific area of the model and supports accurate maintenance when worn or damaged front driveline parts need to be exchanged. The set is named for the front cardan shaft position, making its role within the chassis layout clear. It is intended for the Drakuro platform and links directly to the 1:8 4WD chassis listed in the data, which helps keep parts selection aligned with the correct vehicle family. Because 2 shafts are included, the pack matches the paired layout used at the front end. This makes the set useful for planned servicing as well as targeted repair work after heavy running. In the workshop, the shafts fit naturally into rebuilds, drivetrain refreshes, and spare-parts storage for the Drakuro range. For RC model enthusiasts maintaining a 1:8 4WD setup, a model-specific replacement part like this keeps attention on the exact component group rather than a generic universal fit. Warning! Not suitable for children under 14 years.
Additional spares
Drakuro LED Strip for 1:8 Chassis, Light Set
500406070€8.49
The Drakuro LED strip set adds red and white lighting to the 1:8 4WD chassis named in the data, giving the model a clearer visual signature once fitted. With 2 separate LED strips, the layout can be integrated into the vehicle as a dedicated light upgrade rather than a general decoration. The colour split of red and white supports a front-and-rear lighting arrangement that suits RC vehicle styling and helps define the chassis lines more clearly. The set is identified for the Drakuro platform, including the versions 500409096 Drakuro BL 3S anthracite/red and 500409097 Drakuro BL 3S blue listed in the data. As an accessory in the models supplies category, it expands the visual setup of the vehicle while leaving the core drivetrain and running configuration unchanged. Mounted on a compatible Drakuro chassis, the strips add a stronger light presence for evening sessions, indoor running, or a more finished bench display between drives. The 2-piece format also supports a tidy installation concept across separate areas of the model, depending on the chosen layout. Warning! Not suitable for children under 14 years.
Additional spares
Drakuro Lower Arm Hinge Pins, RC Spare Part
500406056€5.49
The Drakuro Lower outer arm hinge pins set supplies 2 replacement pins for the lower control arm on the Drakuro 1:8 4WD chassis. With a stated length of 45 mm, this spare part is aimed at maintenance work where the correct pin dimension matters for the suspension assembly and for keeping the chassis hardware matched to the original specification. In the parts reference, the hinge pins are listed as lower control arm retaining pins, which identifies their role within the outer arm mounting area rather than as general-purpose hardware. That makes the set useful when wear, loss, or damage calls for a like-for-like replacement on the Drakuro platform. The 2-piece quantity also matches a focused repair task without adding unrelated hardware. The product data links this part to the Drakuro BL 3S variants in anthracite/red and blue, giving model-building enthusiasts a clear reference point within the range. On the workbench, a dedicated chassis spare part like this helps keep servicing organised by function and by model family. For rebuilds, routine checks, or replacing worn suspension hardware after running sessions, the exact 45 mm format gives a concrete specification to work from. Warning! Not suitable for children under 14 years.
Additional spares
Drakuro Lower Inner Arm Hinge Pins, RC spare part
500406052€6.49
These lower inner arm hinge pins are a dedicated spare for the Drakuro platform and address a precise chassis connection point rather than a general hardware need. With a specified length of 70 mm and a pack of 2 pieces, the set is intended for the lower control arm retaining position on the 1:8 4WD chassis used by the named Drakuro BL 3S models. In regular RC maintenance, suspension hardware needs the right dimensions and the right fit at the right mounting point. This set keeps that replacement specific: lower inner arm hinge pins for the chassis area named in the data, sized at 70 mm, and supplied as 2 matching pieces for the same suspension location. The reference to Drakuro BL 3S anthracite/red and Drakuro BL 3S blue ties the spare to the stated vehicle variants, which helps when checking compatibility within the range. Whether the chassis is being serviced after repeated track sessions or refreshed as part of a parts stock for the workshop, these pins support a straightforward replacement at the lower inner arm position. The focused specification makes them a useful choice when the goal is to keep a Drakuro 1:8 4WD chassis running with the correct suspension hardware. Warning! Not suitable for children under 14 years.
Wishbones
Drakuro Lower Suspension Arms, chassis spare part
500406048€12.99
The Drakuro lower suspension arms are a dedicated spare part set for the 1:8 4WD chassis and provide a direct replacement option for compatible Drakuro models. Supplied as 2 pieces, this set is intended for the lower suspension position, where the arms connect key running gear components and support the chassis layout during maintenance work. For model-building enthusiasts, a correct-fit replacement part keeps a repair focused and avoids unnecessary guesswork during servicing. The Drakuro designation in the part name links the set clearly to the matching vehicle platform named in the data, including 500409096 Drakuro BL 3S anthracite/red and 500409097 Drakuro BL 3S blue. That makes the pair a practical choice when worn or damaged suspension parts need to be exchanged while keeping the original component arrangement of the 1:8 4WD chassis. Whether the workshop task is routine upkeep after running sessions or a targeted repair on the suspension assembly, this 2-piece set covers the lower arm position with the exact component group stated in the data. As a chassis spare part, it suits bench work where fit, platform match and clear parts identification matter. Warning! Not suitable for children under 14 years.
Pinions & gears
Drakuro Main Gear, RC spare part, 57T steel
500406071€12.99
The Drakuro main gear is a dedicated RC spare part for the Drakuro platform, specified here as a steel spur gear with 57 teeth. That exact tooth count matters in drivetrain service, because it preserves the stated gearing layout instead of substituting a different ratio. For model-building enthusiasts, this is a focused workshop part with a clear role inside the transmission. The data links the gear to a 1:8 4WD chassis, which gives the part a concrete platform reference for maintenance and replacement work. Rather than a mixed bag of hardware, this spare centres on one drivetrain component, making it easier to identify during repairs or scheduled upkeep. The steel material gives the part a precise technical identity in the copy and helps separate it from generic gear listings that omit the actual construction. The naming in the data also connects it to the Drakuro range, supporting a more exact search when the original main gear needs to be replaced. In practical use, this gear suits bench work on a Drakuro chassis when the transmission is being refreshed or a worn spur gear is being exchanged. It also fits parts stocking for hobby workshops that keep key drivetrain components ready for the next service interval. Warning! Not suitable for children under 14 years.
Additional spares
Drakuro Motor Mount Set, RC spare part
500406069€10.49
The Drakuro Motor mount set is a dedicated spare part set for the Drakuro BL 3S range and focuses on the motor mounting area of the chassis. The data names a plastic motor mount together with an aluminum mounting plate, giving model-building enthusiasts 2 specific replacement components for service work on the stated platform. The set is linked in the data to the 1:8 4WD chassis and to the Drakuro BL 3S versions in anthracite/red and blue. That makes it a targeted choice when the motor mounting section needs the exact parts named for repair, maintenance, or a like-for-like replacement. The material combination is clearly defined: the motor mount is plastic, while the mounting plate is aluminum. This keeps the scope of the set clear and avoids guesswork around unspecified extras or broader conversion parts. In workshop use, the set suits rebuilds after wear in the motor area, replacement during routine servicing, or keeping matching spare components ready for the Drakuro chassis. For hobby benches centered on 1:8 4WD running gear, a model-specific mount set helps keep repairs focused on the exact section named in the product data. Warning! Not suitable for children under 14 years.
Pinions & gears
Drakuro Motor Pinion Gear, accessory, 12T
500406068€8.49
The Drakuro Motor pinion gear is a steel drivetrain spare part built around a clear specification: 12 teeth, a 5 mm bore and a grub screw for fastening on the motor shaft. For compatible 1:8 4WD chassis layouts, that combination gives model-building enthusiasts a defined replacement choice when the original pinion needs to be exchanged. The steel construction focuses this part on the drive system, where tooth count and bore size need to match the installed setup. The grub screw secures the pinion on the shaft, while the 12T format provides the stated gearing reference for maintenance or repair. The product data also links this part to Drakuro BL 3S vehicle versions in anthracite/red and blue, which helps place it within the Drakuro range without overstating compatibility beyond the stated information. In workshop use, this kind of spare part belongs in routine drivetrain servicing, rebuilds after wear, or a direct replacement during ongoing running sessions. For hobby benches that stay organised by exact dimensions and tooth counts, the 5 mm bore and 12T layout make this gear easy to identify within a parts stock. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Drakuro Oildamper, shock absorbers, 95 mm
500406064€24.99
The Drakuro Oildamper set brings 95 mm oil-filled shock absorbers to 1:8 4WD chassis maintenance, with 2 dampers supplied as a matched pair for suspension work on compatible Drakuro setups. In RC running, oil dampers shape how the chassis reacts after compression, helping the suspension return with more control than an undamped spring alone. This set is aimed at the suspension area rather than general drivetrain service, so it fits naturally into rebuilds, wear replacement, or planned setup changes on a 1:8 platform. The 95 mm length is the key workshop reference when checking compatibility against the existing installation. Because 2 pieces are included, the pair suits one axle end in a typical left-right arrangement, which matters when keeping damping hardware even across the chassis. The designation in the data links the set to the Drakuro line, giving model-building enthusiasts a direct spare part option for that series. On the bench, the pair can be used when a damaged damper needs replacing after hard running, or when an existing suspension set is being refreshed to restore a balanced response. For hobbyists maintaining a 1:8 4WD model, a correctly sized damper pair is a practical part to keep alongside other running gear spares between track sessions.
Additional spares
Drakuro Rear Axles, spare part, 2-piece set
500406055€10.49
The Drakuro Rear axles set supplies 2 rear wheel axles for the 1:8 4WD chassis named in the data, giving the rear running gear the exact replacement part type rather than a generic hardware substitute. With the Drakuro designation tied directly to the chassis reference, the set fits naturally into maintenance work focused on the rear axle area. Because the data identifies these parts specifically as rear wheel axles, the set is clearly aimed at the wheel-carrying section at the back of the chassis. The 2-piece quantity corresponds to one rear pair, which helps keep servicing straightforward when a rebuild calls for both sides. In workshop use, a dedicated axle set like this supports cleaner parts planning than mixing unmatched components from general assortments. The 1:8 scale reference and 4WD chassis note also place the set within a defined model platform, which matters when selecting drivetrain and suspension-related replacements. On the hobby bench, this kind of spare part belongs in regular upkeep, damage repair or a more complete chassis refresh. It suits rebuild sessions where the rear end is being stripped, checked and reassembled around the specified axle position. Warning! Not suitable for children under 14 years.
Axles & drive shafts
Drakuro Rear Driveshafts, RC spare part, 85 mm
500406057€12.99
Rear driveshafts take a constant load in a 1:8 4WD chassis, linking the drivetrain to the rear wheels through every acceleration, braking phase and direction change. This set provides 2 replacement rear driveshafts in 85 mm for the Carson Drakuro BL 3S, giving the rear driveline the specified part length for a correct match on the named platform. The set is intended for the Carson Drakuro BL 3S in the anthracite/red version with Material No. 500409096 and the blue version with Material No. 500409097. As dedicated spare parts for the rear axle area, the shafts are suited to maintenance work when worn or damaged driveline parts need to be exchanged. The 85 mm dimension is the key fit detail here, because driveshaft length must match the chassis layout and suspension geometry of the specified model. With 2 pieces in the pack, both rear sides can be equipped in one repair step where the model requires a pair. In workshop use, this kind of replacement part supports routine servicing after repeated running sessions on a Drakuro BL 3S chassis. It also suits a planned rebuild in which the rear drivetrain is being refreshed with model-specific spare parts rather than generic alternatives. Warning! Not suitable for children under 14 years.
Additional spares
Drakuro Servo Horn, RC spare part for 1:8 chassis
500406046€4.49
The Drakuro Servo horn is a dedicated replacement part for the 1:8 4WD chassis in the Drakuro range. As the link between the steering servo and the chassis steering mechanism, this small component plays a direct role in transferring servo movement into wheel input, making it a relevant part for repair and routine maintenance. The available data identifies the servo horn specifically with the Drakuro platform and places it in the RC models and accessories segment. That clear platform reference matters on the hobby bench, where matching a spare part to the correct chassis helps avoid unnecessary trial and error during servicing. The part is listed as a servo lever, which points to its mechanical role in the steering linkage rather than to electronics or body hardware. This replacement suits workshop stock for keeping a Drakuro 1:8 4WD chassis ready for continued use after wear, damage, or a missing original part. In a maintenance session, the servo horn belongs among the key linkage components checked when steering response needs to be restored with the correct platform-specific spare. Warning! Not suitable for children under 14 years.
Additional spares
Drakuro Servo Saver Set, steering chassis part
500406040€16.99
The Drakuro Servo saver/steering arm set is a dedicated spare part set for the 1:8 4WD chassis used in the Drakuro BL 3S range. Named components include the servo saver and steering lever set, giving model-building enthusiasts the exact steering-area parts identified for this platform rather than a generic fit solution. Compatibility is stated for the Carson references 500409096 Drakuro BL 3S Anthracite/Red and 500409097 Drakuro BL 3S Blue. That makes the set relevant when the steering linkage on one of these versions needs replacement with the specified parts. Within the front steering layout, the servo saver works with the steering arm section as part of the control path between the steering servo and the wheels, so replacing worn or damaged parts in this area helps return the chassis to its intended mechanical setup. The set is focused on these named steering components, which keeps part selection straightforward for workshop use. On the bench, this kind of chassis-specific spare part suits routine maintenance, repair after running damage, or keeping a compatible Drakuro model ready for the next session. For hobby shelves with active RC vehicles, a clearly assigned steering replacement set saves time when the correct parts are needed. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Drakuro Shock Towers, front and rear chassis parts
500406038€16.99
The Drakuro BL 3S uses a 1:8 4WD chassis layout, and these front and rear shock towers are the matching chassis parts for that platform. They provide the mounting points for the dampers at both ends, making them a focused choice for repair work, scheduled maintenance, or a rebuild based on the named Drakuro setup. Because the set covers both front and rear positions, the suspension mounting structure can be renewed as a pair rather than sourced piece by piece. That keeps workshop planning straightforward when the goal is to restore the chassis hardware around the damper installation points. The product data identifies the parts specifically as shock towers for the Drakuro range, with fitment tied to the 1:8 4WD chassis and the Drakuro BL 3S references listed there. For hobby benches that stay organised by platform, that clear model link matters when selecting replacement hardware. These parts fit naturally into service scenarios such as replacing worn mounting components, preparing spares before track use, or refreshing a chassis during a larger maintenance session. In each case, the role stays precise: front and rear damper mounting points for the Drakuro platform, supplied as dedicated chassis parts rather than general accessories. Warning! Not suitable for children under 14 years.
Screws
Drakuro Spring Retainers, chassis parts
500406072€6.99
The Drakuro Spring retainers & ball studs set supplies the exact shock absorber hardware named for the 1:8 4WD chassis. With 4 spring plates and 4 ball joints, the pack focuses on the suspension connection points that link the dampers to the chassis layout and keep the mounting arrangement complete. The set is assigned to the Drakuro BL 3S platform and matches the anthracite/red 500409096 and blue 500409097 versions listed in the data. That makes it a clear maintenance choice when worn or missing shock absorber fittings need to be replaced with the stated component type. Spring plates and ball joints sit at a functional point in the suspension system, where accurate seating and free movement matter for clean installation. As a dedicated spare-parts set rather than a mixed hardware bundle, it keeps the repair focused on the exact area named in the specification. In workshop use, the parts suit routine servicing after heavy running, inspection of the damper mounts, or a targeted refresh during chassis upkeep. For model-building enthusiasts, this kind of model-specific hardware helps keep a Drakuro 1:8 4WD setup aligned with its intended suspension layout. Warning! Not suitable for children under 14 years.
Axles & drive shafts
Drakuro Stabilizer Set, chassis accessory, 1:8
500406051€10.49
Built for the Drakuro platform, this front and rear stabilizer set adds a targeted chassis upgrade for the 1:8 4WD layout. The set is assigned to the Drakuro BL 3S versions 500409096 in Anthracite/Red and 500409097 in Blue, giving model-building enthusiasts a model-specific route when refining the running gear. Stabilizers work through the suspension movement across each axle, linking left and right sides to influence how the chassis reacts when cornering forces build. With front and rear parts supplied for the same vehicle family, setup changes can be approached as a balanced package rather than as a single-end modification. That makes the set relevant for rebuilds after wear, for planned tuning sessions, or for restoring the intended hardware on an existing Drakuro chassis. As an accessory in the Models & Accessories range, it focuses on the mechanical side of RC handling rather than cosmetic changes. The set fits naturally into bench work before the next run, especially when a 1:8 4WD model is being refreshed or adjusted for a different handling feel. It also suits spare-parts storage for the named Drakuro BL 3S versions, keeping the correct stabilizer hardware ready for future chassis work. Warning! Not suitable for children under 14 years.
Axles & drive shafts
Drakuro Steering Knuckle Set, chassis spare part
500406043€12.99
The steering knuckle set is made for the Drakuro 1:8 4WD chassis and covers both the front and rear positions named in the data. That gives model-building enthusiasts a dedicated spare part for targeted maintenance on a platform built for RC running rather than a generic workshop substitute. The set is linked directly to the vehicle references 500409096 Drakuro BL 3S anthrazit/rot and 500409097 Drakuro BL 3S blau, which helps when matching replacement parts to the correct chassis family. In practical workshop use, steering knuckles sit at a critical point in the wheel assembly, where suspension movement and steering input meet. Replacing worn or damaged parts in this area can be an important step during a rebuild after repeated high-load sessions. Because the set is specified for front and rear use, it supports a more complete refresh of the running gear than a single-position replacement. This kind of spare part fits naturally into routine RC maintenance, whether the chassis is being repaired after contact, stripped for inspection, or prepared as a rolling base for the next outing. In a hobby workspace, a model-specific set like this helps keep service work focused on fit and function within the Drakuro platform. Warning! Not suitable for children under 14 years.
Axles & drive shafts
Drakuro Steering Link Set, model accessory
500406044€6.49
A steering system only feels right when the linkage matches the chassis it was made for. This Drakuro Steering link set is specified for the 1:8 4WD chassis and gives model-building enthusiasts a dedicated replacement option for the steering setup on compatible Drakuro vehicles. The set is listed as a model accessory in the Models & Accessories range and is assigned to the Drakuro BL 3S platform. Compatibility is stated for 500409096 Drakuro BL 3S Anthracite/Red and 500409097 Drakuro BL 3S Blue, which makes the intended fit easy to identify when planning maintenance or keeping workshop spares ready. As a steering link set, it belongs to the front-end control hardware that connects steering movement through the chassis layout, making it a relevant part for repair work after wear or damage. The focus here is not on a generic spare, but on a named set for a defined vehicle platform. In workshop use, this kind of chassis-specific linkage helps keep servicing organised and avoids guesswork when replacing worn steering parts on a compatible 1:8 4WD model. It suits routine upkeep, targeted repairs, and parts storage alongside other Drakuro running gear components. Warning! Not suitable for children under 14 years.
Additional spares
Drakuro Upper Arm Hinge Pins, RC spare part
500406054€6.49
The Drakuro Upper Arm Hinge Pins set supplies a focused replacement for the upper control arm retaining position on the Drakuro 1:8 4WD chassis. With 2 pins at 40 mm length, the set addresses a specific suspension mounting point rather than a general hardware assortment, which keeps repair planning clear at the bench. In the chassis layout, hinge pins form the connection point that holds the arm in its intended position while allowing the suspension assembly to articulate as designed. Replacing a worn, bent, or missing pin in this area helps return the upper inner arm mounting to its stated configuration. The part reference in the data links this set to the Drakuro BL 3S variants listed for the 1:8 4WD platform, including anthracite/red and blue versions. This kind of spare part suits routine maintenance, targeted repairs after running sessions, or keeping key suspension hardware on hand between rebuilds. In a workshop setup, the 2-piece pack gives the exact quantity stated for this replacement task without shifting attention to unrelated fittings or general-purpose fasteners. Warning! Not suitable for children under 14 years.
Wishbones
Drakuro Upper Arm Mount Set, chassis spare part
500406042€10.49
This front and rear upper control arm mount set is a dedicated spare part for the 1:8 4WD chassis used by the Carson Drakuro BL 3S range. The data names compatibility with version 500409096 in Anthracite/Red and version 500409097 in Blue, making the set a precise match for those listed models rather than a generic suspension part. As an upper suspension arm holder for front and rear fitment, the set serves a defined role in the chassis layout by providing the mounting position for the upper control arms. That makes it relevant when maintenance work calls for a direct replacement in the suspension area. The naming in the data keeps the application clear: Drakuro upper suspension arm holder front and rear. For hobby work on a 1:8 4WD platform, that clarity helps when selecting the correct chassis component for an existing vehicle. In the workshop or at the bench, a model-specific spare part keeps repair planning focused on the exact platform named in the data. This set fits the listed Drakuro BL 3S variants and supports continued use of the chassis with the correct front and rear upper arm mounting component. Warning! Not suitable for children under 14 years.
Wishbones
Drakuro Upper Outer Arm Hinge Pins, RC spare part
500406058€4.49
The Drakuro Upper outer arm hinge pins are a dedicated spare part for the Drakuro 1:8 4WD chassis, built around a precise suspension mounting task rather than a universal fit. With a specified length of 30 mm and a pack of 2 pieces, this set addresses the upper outer arm position named in the parts data and keeps replacement work tied to the correct location on the vehicle. On a 4WD chassis, hinge pins sit at the heart of the suspension linkage, connecting moving arm sections while allowing controlled travel through bumps, landings and steering inputs. Using the stated Drakuro-specific part helps maintain the intended relationship between the arm and its mounting point, which matters when worn hardware starts to introduce play into the suspension. The 1:8 scale platform reference also makes this spare part easy to place within an existing workshop stock for the correct vehicle family. In regular RC maintenance, parts like these are typically fitted during suspension service after heavy running or when rebuilding a damaged corner of the chassis. For hobbyists keeping a Drakuro BL 3S ready for the next outing, a correctly assigned hinge pin set helps keep repairs direct, organised and matched to the named model platform. Warning! Not suitable for children under 14 years.
Wishbones
Drakuro Upper Suspension Arms, RC spare part
500406047€8.49
The Drakuro Upper suspension arms set is a dedicated spare part for the 1:8 4WD chassis used on Carson Drakuro BL 3S models. With 2 upper control arms included, the set addresses one clearly defined area of the suspension system and gives model-building enthusiasts the correct replacement parts for service work on anthracite/red and blue Drakuro BL 3S versions. In the suspension layout, upper control arms guide the wheel assembly through its movement and work as part of the geometry that keeps the chassis operating as intended. Replacing worn or damaged arms can be an important step when restoring a vehicle after heavy running, contact damage or general workshop wear. The designation in the data identifies these parts specifically as upper suspension arms rather than a universal linkage set, which matters when matching spares to the correct position on a 1:8 platform. The set quantity of 2 pieces suits direct replacement of the named component group without introducing unrelated hardware into the job. This spare part fits maintenance benches, race-day pit boxes and home workshop stock alike. For hobbyists keeping a Drakuro BL 3S ready for the next run, a model-specific suspension replacement like this helps keep servicing focused on the exact chassis parts that need attention. Warning! Not suitable for children under 14 years.
Additional spares
Drakuro Wheel Hex-Hub, RC spare part, 1:8
500406049€6.49
Built for the Drakuro platform, this wheel hex-hub set supplies the small but essential mounting parts that sit at the wheel connection points of the 1:8 4WD chassis. The pack contains 4 wheel hex-hubs and 4 spacer pieces, giving the specified vehicle layout the matching parts needed for replacement work. The set is assigned to the Carson Drakuro BL 3S versions 500409096 in anthracite red and 500409097 in blue, which keeps compatibility tied to clearly named models rather than broad guesswork. In RC maintenance, these parts belong to the hardware that supports the wheel mounting interface, making them relevant when worn or missing components need to be exchanged on the stated chassis. The combination of hex-hub and spacer piece keeps the replacement focused on the exact area named in the data instead of a generic mixed hardware pack. On the bench, the 4-piece wheel hex-hub set suits planned servicing, targeted repairs and keeping matching replacement parts ready for the next rebuild session. For hobby workshop use on the Drakuro 1:8 4WD chassis, the clearly assigned fit helps keep parts selection straightforward. Warning! Not suitable for children under 14 years.
Ball bearings
DT-01 Grasshopper Ball Bearing Set, RC spare part
500904025€12.29
This DT-01 Grasshopper 1/2 ball bearing set brings a focused upgrade to the running hardware of compatible RC models. The pack contains 10 metal bearings, giving model-building enthusiasts a dedicated spare-parts set for maintenance, replacement work or a planned chassis refresh. Ball bearings sit at the heart of rotating assemblies, where the inner and outer rings support cleaner movement than worn stock parts. In RC vehicle use, that matters at axle points, gearbox locations and other driven sections that rely on consistent rotation. The shielded metal design shown for this set suits hobby workshop use where precise fit and dependable rolling action are essential. As a model supply in the Models & Accessories category, this set is aimed at technical upkeep rather than decoration, making it a practical addition to parts storage for regular servicing. Whether the task is rebuilding a used chassis, replacing tired bearings after repeated runs or preparing compatible DT-01 and Grasshopper 1/2 models for smoother operation, this 10-piece set covers a core mechanical need. Age marking: 14 Years Warning! Not suitable for children under 14 years.
Ball bearings
DT03/DT02 Ball Bearing Set, RC spare parts
500904031€15.99
A compact bearing upgrade can change how an RC chassis feels on the bench and on the track. This DT03/DT02 Ball Bearing Set includes 14 shielded metal bearings made for the rotating assemblies of compatible buggy platforms, bringing a more precise, lower-friction running characteristic to key moving points. The set is intended for TAMIYA DT02 Super Fighter G and DT03 Neo Fighter Buggy. In these chassis, ball bearings take over tasks at points where shafts, axles or transmission parts need clean, consistent rotation. The shielded design helps keep the bearing mechanism enclosed while the metal construction matches the mechanical role of a hard-working spare part. With 14 bearings in the pack, the set is configured as a model-specific upgrade rather than a generic workshop assortment, which makes it a practical choice for repair work, scheduled maintenance or a fresh chassis build based on the named platforms. On a rebuild, the bearings support a tidier drivetrain feel and freer-running rotating parts. During regular use, they suit workshop stock for servicing a DT02 Super Fighter G or DT03 Neo Fighter Buggy after wear, cleaning or part replacement. Age 14+ Warning! Not suitable for children under 14 years.
Additional spares
Front Bumper for Virus and Akuma RC Models
500205942€4.39
A front bumper takes the first contact at the nose of an RC vehicle, and this replacement part is shaped for that exact role on compatible Carson models. The black component combines a rounded horizontal bar with a flat top mounting bracket, creating the front-end guard layout shown for the Virus and Akuma range. The part is specified as a front bumper for Virus 4.0, 4.1, 4.2, 4.3 and Race models, and it is also listed for Akuma. The mounting section uses 2 round screw holes, a concrete fixing layout that helps match the part to the correct front attachment points on the compatible chassis. As a dedicated spare part, it suits repair work after front-end wear or impact damage and supports a tidy rebuild with the intended shape rather than an improvised substitute. The cylindrical bumper form and textured finish keep the look close to the original style of the vehicle line. In workshop use, this bumper fits naturally into routine maintenance, collision repair or a full refresh of a well-used RC model. It also serves as a practical stock spare for hobby benches where Virus or Akuma vehicles are kept running across repeated driving sessions. Warning! Not suitable for children under 14 years.
Wishbones
Front Suspension Arm Set, RC spare part, 2 pcs
500205949€10.79
A fresh front end starts with the parts that locate the wheel assembly, and this front suspension arm set supplies 2 lower arms for that job on selected Carson models. The black molded components use a reinforced wishbone-style shape with cutouts, pivot mounts and defined mounting points that suit front axle repair when worn or damaged arms need replacement. The set is specified for Virus 4.0, 4.1, 4.2, 4.3 and Race variants, and it also fits Akuma models named in the product data. Each arm is formed as a mirrored chassis part, so the pair covers the front lower arm position as a matched replacement set rather than a mixed hardware bundle. The geometry includes a circular recessed mounting area, a long slot and additional holes that support the intended connection points within the suspension layout. The matte black finish keeps the look consistent with technical RC chassis parts. In workshop use, a dedicated spare part like this helps bring a model back into service after front suspension wear, impact damage or routine maintenance. The 2-piece format suits targeted repairs on the front axle and keeps the rebuild centered on the exact area named by the set. Warning! Not suitable for children under 14 years.
Axles & drive shafts
Front Universal Drive Shafts, RC spare part
500205946€29.99
Front universal drive shafts are a focused drivetrain replacement for Carson Virus and Akuma model platforms, supplied as 2 matching parts for the front axle assembly. The black metal construction and universal-joint style ends suit the mechanical demands of rotational power transfer where steering angle and suspension movement both need to be accommodated within the same front drivetrain area. The shaft design shown in the set combines a long rod section with a cylindrical housing, external threads near one end and a cross-drilled connector section for installation in the relevant drivetrain assembly. At the opposite end, the rounded joint section with 2 perpendicular pins forms the coupling point that allows the shaft to transmit drive while the front end geometry continues to move through use. Compatibility is stated for Virus 4.0, 4.1, 4.2, 4.3 and Race, as well as Akuma, making the set a clear match for maintenance, repair or parts replacement on those series. In workshop use, a matched 2-piece shaft set helps restore the front drive path on models that show wear, impact damage or drivetrain play at the axle end. Age marking: 14 years. Warning! Not suitable for children under 14 years.
Ball bearings
GF-01/WR-02/TL-01 Ball Bearing Set, RC accessory
500904026€26.49
A full ball bearing conversion is a classic step in RC model maintenance, and this GF-01/WR-02/TL-01 set brings together 24 matching bearings for those three chassis families in one technical parts pack. The compact metal bearings are made for rotating assemblies where clean, controlled movement matters during running and servicing. Each bearing uses an inner ring, outer ring and shielded side faces to support shafts and axles while reducing friction at the contact point. That mechanical change can help a compatible chassis turn more freely than with worn bushings or tired bearings, especially in areas that see repeated rotation. The set format also keeps the quantity clear for planned rebuild work, so workshop preparation stays focused on the actual chassis requirement rather than mixed loose spares. As a dedicated RC accessory, the bearings suit replacement after wear as well as careful upgrades during a fresh build or strip-down. On the bench, the set fits naturally into drivetrain service, axle maintenance and general chassis overhauls on GF-01, WR-02 and TL-01 models. The small, uniform format also makes the bearings useful to keep on hand for routine hobby maintenance when a smooth-running rotating assembly is the goal. Warning! Not suitable for children under 14 years.
Ball bearings
KoD Ball Bearing Set, model accessory, 14 pcs
500405916€21.99
The KoD Ball bearing Set brings 14 replacement bearings together in one technical maintenance pack for RC model work. Metal construction and black rubber seals give each bearing a defined role in rotating assemblies, where clean support and reduced friction matter for consistent running. The set image shows multiple sizes, with 8 larger bearings and 6 smaller bearings arranged as a mixed pack rather than a single-size refill. That layout suits models that use different bearing dimensions across hubs, axles or other mechanical mounting points. In workshop use, ball bearings support shafts and rotating parts while helping assemblies turn with less resistance than worn plain mounts. The rubber-sealed design adds a practical barrier around the bearing race, which is especially useful where dust and fine debris can work into moving parts during regular running sessions. As a spare parts accessory, the KoD Ball bearing Set fits naturally into routine servicing, rebuilds and replacement work on compatible model vehicles or mechanical model assemblies. The 14-piece count provides a ready stock for partial overhauls or for renewing several wear points in one session. Age marking: 14 Years.
Pinions & gears
KoD Bevelgear Joint Cup, spare part set
500405884€15.89
Small drivetrain parts make a decisive difference when a model's transmission needs accurate mechanical engagement, and this KoD Bevelgear Joint Cup set focuses exactly on that task. The set contains 2 compact metal components: a bevel gear with angled teeth and a matching joint cup, both intended as replacement parts for Carson Modelsport KoD applications. The bevel gear is shaped to transfer rotational force through a meshing drivetrain layout, where the angled tooth form supports the change of direction typical of this gear type. Alongside it, the joint cup adds the matching connection element for the relevant assembly point. The cylindrical cup form, central opening and side detail shown in the product data indicate a part designed to seat and connect within a compact drive system rather than serve as a decorative add-on. For maintenance work, that means a focused replacement set built around the actual moving interface. This kind of spare part suits workshop tasks such as repairing worn transmission sections, refreshing a used drive assembly, or keeping a KoD model ready for further running sessions. The metal construction matches the technical role of both parts, where tooth contact, fit and connection points matter more than cosmetic detail.
Pinions & gears
KoD Center Differential 46T Drivetrain Part
500405882€41.99
The KoD Center differential 46T brings a core transmission element into the workshop for model-building enthusiasts working on drivetrain maintenance. Its 46T gear sits around a central differential housing with a shaft running through the assembly, creating the mechanical basis for rotational transfer within a compatible model system. The technical drawing shows a large spur gear combined with a cylindrical centre section, plus upper and lower slotted shaft ends for coupling into matching parts. A circular flange with 3 evenly spaced holes adds a defined mounting point, while the shaped cutouts on both shaft ends indicate a keyed connection rather than a plain round axle. This makes the assembly relevant for repairs where a worn or damaged centre drivetrain unit needs to be exchanged for a like-for-like component. The compact one-piece layout also keeps the gear, housing and shaft interface together in a single assembly. In a rebuild, service, or replacement context, this differential fits naturally into the parts bench alongside other transmission components. The age marking is 14 Years. Batteries are not included.
Pinions & gears
KoD Differential Front Rear Drivetrain Part
500405881€41.99
The KoD Differential front/rear is a dedicated drivetrain component for compatible Carson Modelsport assemblies, designed for use at the front or rear position where rotational force needs to be transferred through the running gear. Its enclosed cylindrical form combines the central mechanism with a clearly defined outer gear ring, creating the interface needed for meshing with the surrounding transmission layout. A broad top flange with evenly spaced mounting holes provides the basis for installation in the matching assembly, while the slotted shaft ends define the connection points for adjoining drive parts. This layout suits repair work, maintenance, or the replacement of a worn drivetrain element in an existing model. The compact mechanical format keeps the function focused on transmission and fit rather than cosmetic detail. In workshop use, the part supports the restoration of a front or rear drive section where a compatible differential is required. For model-building enthusiasts working on Carson Modelsport vehicles, it adds a specific drivetrain component that can be integrated into the existing mechanical setup. Age marking: 14 years+
RC chassis & attachments
KoD Front Bumper RC Spare Part Mount
500405909€4.49
A front bumper shapes the look of a model's nose and provides the mounting point that keeps the front section correctly positioned. This KoD Front bumper is designed as a replacement part with a curved lower base, a raised central tab and a compact bracket-style layout that suits precise model maintenance. The black moulded part features 2 circular mounting holes at the top of the upright tab, giving a defined screw position for attachment. Across the front, 3 rounded support channels are separated by vertical ribs, creating a structured contact area that helps guide the fitted section into place. The combination of the broad lower section and the upright centre mount gives the part a clear front-end geometry, which is useful when restoring a worn or damaged bumper area on an RC model. Its formed shape is focused on mounting, supporting and securing the connected section rather than adding decorative detail. This kind of spare part suits workshop tasks such as repair, maintenance or replacing a missing front-end component after heavy running sessions. It also fits rebuild projects where the front assembly needs the correct shaped mount to return the model to a complete and functional condition.
Axles & drive shafts
KoD Front Drive Shafts, RC spare part
500405893€28.99
KoD Front drive shafts are a dedicated 2-piece spare set for the front drivetrain of a compatible KoD model. Each shaft is shown in black metal and uses a jointed layout with visible cross pins at the upper end, giving the assembly the articulated connection needed in a driven front axle. The shape of each component combines a long slim shaft section, a rounded joint head and a wider cup-style lower housing. That geometry suits the changing angles that occur at the front end of an RC vehicle while drive is being transmitted to the axle. As replacement parts, the pair provides matching components for the left and right side rather than a mixed assortment. The metal build adds a precise mechanical character that fits the role of drivetrain hardware. In workshop use, these shafts suit maintenance, repair or the refresh of a worn front drive assembly on a 14 Years+ model. The set is focused on one clear task: replacing the front axle shafts with the correct 2 matching components so the drivetrain can be reassembled with the intended part type.
Additional spares
KoD Gear Housing, RC spare part, front rear
500405883€12.79
The KoD Gear housing front/rear is a dedicated RC spare part for Carson Modelsport vehicles, supplied as a 2-piece housing set with a larger main section and a matching cover. The black moulded parts are shaped for the drivetrain area, where a compact enclosure helps organise mechanical components and supports clean integration into the chassis layout. The larger housing features a circular opening at the front, upright mounting ears with through-holes, cylindrical posts for fasteners, side mounting points and a rectangular lower cutout. The smaller cover adds matching screw locations, recessed surface detailing and reinforced rib sections that follow the form of the main casing. Together, these details indicate a housing designed to enclose and support connected transmission or gear components while leaving the required access points for mounting and assembly. For hobbyists maintaining a KoD model, this kind of replacement part helps restore the original fit of the front or rear mechanical housing area. It suits workshop use during repair, parts replacement or a full rebuild, especially when worn or damaged casing sections need to be exchanged for fresh components. The 2 matching pieces can be kept ready in the spares box for routine servicing or used to complete a drivetrain housing section during a more extensive chassis refresh.
Wishbones
KoD Hinge Pins for Arms, spare parts set
500405889€10.49
KoD Hinge Pins for Arms is a spare parts set for model maintenance, centered on the arm connection points that rely on correctly fitted pins to keep moving sections aligned. The set is presented as 4 hinge pins for arms, making it a focused replacement option for repairs where the original hardware needs to be renewed. The product image shows multiple metal rods with grooves near the ends and matching retaining clips, indicating a fastening system in which the clips lock the pins into place on the relevant assembly points. This kind of hardware is used where articulated sections need a defined pivot and secure retention rather than a loose push fit. The metal construction suits the mechanical role of the parts, while the grooved ends provide the detail needed for clip-based fixing. As a model supplies entry within Models & Accessories, the set fits naturally into routine servicing, rebuilds and parts replacement work. With the age marking of 14 Years in the product data, the set sits in a hobby context rather than an early-play category. It can be kept on hand for workshop stock, used during a repair session, or fitted when an arm assembly is being refreshed as part of ongoing model upkeep.
Wishbones
KoD Lower Arms Kit Front, RC spare parts
500405900€10.79
The KoD Lower Arms Kit Front brings the front suspension layout of the KoD platform back into service with a matched 2-piece replacement set. Each arm is shaped for its side of the chassis and marked L or R, so the left and right positions stay clearly defined when the front end is rebuilt. The moulded arms combine circular pivot areas, hinge barrel ends and integrated mounting holes in one structural part. That geometry matters at the front axle, where the lower arm helps connect the wheel assembly to the chassis while allowing the movement needed through steering and suspension travel. The cutout design reduces excess material in the arm shape while keeping the key connection points clearly formed. For hobby workbench use, that means the replacement focuses on the actual wear part rather than a broader front-end overhaul. This set suits maintenance after impact damage, wear at the original arm, or a planned refresh of the front suspension assembly on a KoD model. As a dedicated spare part rather than a universal fitting, it is aimed at model-building enthusiasts who keep an RC vehicle running with the correct chassis-specific components. Age 14+
RC Spare Parts
Wherever driving fun, top speed and daring maneuvers are involved, wear and the occasional “accident” are inevitable. In RC model sports, RC spare parts therefore play a major role. With the right replacement parts, remote-controlled vehicles can be repaired, improved and prepared for their next run.
What are RC spare parts?
RC spare parts are – just as the name suggests – replacement parts for RC models such as remote-controlled cars, motorcycles, boats, aircraft and more. These parts are used when a model has taken damage or when a worn component needs to be replaced. In addition, the wide range of RC spare parts can be used for tuning and optimizing the vehicles.
What should you consider when choosing RC spare parts?
RC spare parts have to do one thing above all: fit the respective model. As a builder, you should make sure that the RC model you are working on is compatible with the spare part of your choice, because only then will installation be successful. In addition to compatibility and correct sizing, quality should also be a key factor when purchasing RC spare parts.
Carson RC spare parts – a product overview
To help you get the best performance out of your models, we offer RC spare parts in the following categories:
Replacement & spares for combustion models
If you need spare parts for your nitro model – whether engines, gearboxes or drive shafts – Carson has you covered. Choose, install and get back on the road!
RC shock absorbers & damper bridges
Your RC car no longer absorbs bumps properly? Then it’s time for new shock absorbers or shock towers. Simply replace them and regain full control!
Screws
Small parts with big impact: whether replacing a lost screw or reassembling your model entirely – we offer every screw you need.
Ball bearings
For a smoothly running drivetrain: ball bearings reduce friction and improve efficiency. Your model will thank you!
Pinions & gears
The drivetrain doesn’t run as smoothly anymore? New pinions or gears will get you back on track – precise, powerful and reliable.
Axles & drive shafts
Cracks or wear in the driveshaft? No problem – Carson offers fitting axles and shafts for many models.
Wishbones
If steering becomes stiff or a crash has left its mark: with new suspension arms your RC vehicle is quickly ready for use again.
RC chassis & attachments
Ready for a new look? Replace damaged bodies or upgrade with spoilers and accessories – for fresh style and full performance!
Additional spares
In addition to the categories above, we also offer a large variety of other spare parts for many different models. Browse the category and find exactly what you need.
RC spare parts: always well prepared with Carson
Thanks to the wide assortment and extensive selection of spare parts, Carson is the top destination for anyone looking to repair or upgrade their RC model. Take a look in our shop and discover high-quality RC spare parts that will prepare your model for its next driving adventure.