RC spares
Whether buggy, sports car, ship or helicopter: Carson provides you with high-quality spare parts for your RC model. Curious? Click here to learn more about RC spares.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, model accessory, 55 mm
500405863€28.49
A 1:10 chassis gains a clear suspension upgrade with this aluminium oil damper set in 55 mm format. The set contains 4 matching dampers, each built with a silver shock body, blue top cap, threaded adjustment collar, white coil spring and black eyelet mounts at both ends. The oil-filled design works through the damper body and shaft to control suspension travel more precisely than a spring alone. The threaded collar allows preload changes directly on each unit, making ride height and spring tension tuning part of the setup process on compatible model vehicles. With 4 dampers in one set, front and rear suspension can be equipped with the same component style for a more uniform chassis response. The aluminium construction adds a technical finish that suits performance-focused builds and replacement projects alike. This accessory fits naturally into workshop sessions built around suspension tuning, chassis refreshes and running gear upgrades on 1:10 RC models. Whether the goal is replacing worn shocks or refining the setup for different surfaces, the 55 mm damper format gives hobbyists a concrete component to work with. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, model part, 62 mm
500405864€28.99
Suspension tuning is one of the clearest ways to change how a 1:10 model behaves on the ground, and this Alu Oil Damper Set brings that adjustment into a compact 62 mm format. The set includes 4 matching dampers, combining threaded metal bodies, white coil springs and blue adjustment collars in a layout aimed at hobby-grade chassis setup. Each damper uses an oil-filled design to manage wheel movement with more control than a spring alone can provide. The threaded body gives room to alter preload, which changes how the suspension sits and reacts under load. That makes the set useful when a chassis needs a more even stance, a refreshed suspension feel or a setup better matched to the running surface. The aluminium construction adds a precise mechanical look, while the eyelet mounts follow the familiar format used on many RC suspension assemblies. On a touring chassis, buggy or truck platform in the 1:10 class, a matched 4-piece damper set helps keep front and rear suspension behaviour balanced during acceleration, braking and corner entry. The included adapter parts expand the installation options for compatible layouts, whether the goal is replacing worn dampers or refining a custom setup for regular running sessions. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, RC accessory, 100 mm
500405758€19.49
Suspension tuning shapes how a 1:10 RC chassis settles into corners, absorbs bumps and transfers weight under braking. This aluminium oil damper set brings that adjustment into a compact 100 mm format, with 2 coilover units that combine spring support and oil damping for a more controlled mechanical response. The threaded damper bodies and blue adjustment collars give the setup a clear tuning point for spring preload, so ride height and chassis balance can be matched more closely to the build. Each damper uses black mounting eyelets at both ends for straightforward attachment within compatible suspension layouts. The silver bodies, exposed springs and blue anodised details also make the hardware easy to identify during maintenance or rebuild work. As a replacement or upgrade part, the set suits hobby projects where suspension behaviour matters as much as drive power or tyre choice. On workshop benches, during rebuild sessions or as part of a fresh chassis setup, these 2 dampers add a concrete tuning option to compatible 1:10 model vehicles. They fit naturally into projects focused on handling refinement, service work or a more adjustable suspension layout. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
1:10 Alu Oil Damper Set, RC accessory, 85 mm
500405757€19.49
At 1:10 scale, this Alu Oil Damper Set brings metal suspension hardware and tuning potential into RC workshop builds. The 85 mm format and 2-piece set suit model builders looking to replace worn dampers or refine a compatible chassis with oil-filled suspension components. The aluminium bodies pair with coil springs, polished shafts and mounting eyelets in a compact coilover layout. The threaded construction allows spring preload changes directly at the damper, so ride setup can be adjusted to match surface conditions and chassis balance. Oil damping adds a controlled mechanical action between compression and rebound, which helps the suspension settle more cleanly after bumps and direction changes. The included small hardware parts support mounting and setup on compatible model vehicles. Whether the goal is a rebuild, a suspension refresh or a more precise base for further tuning, these dampers fit naturally into hands-on RC maintenance. In a bench setup, the 85 mm length gives a clear reference when matching replacement parts, and on a running model the paired design supports even installation across one axle. Warning! Not suitable for children under 14 years.
Additional spares
1:10 Bokusa BL 2S, RC car accessory set
500405994€10.49
The Bokusa BL 2S uses a 1:10 XL chassis format, and this accessory set gathers 3 named components for that platform: a battery holder, covers and a wheelie bar. For model-building enthusiasts, that makes it a focused parts set for repair work, rebuilds or keeping a running chassis complete with the pieces stated in the data. The battery holder addresses the power area of the chassis, while the covers serve the matching body or chassis sections named for this set. The wheelie bar adds a separate rear-end component that suits setups where hard launches can put extra demand on the back of the car. The data also links the set to the Bokusa BL 2S orange and Bokusa BL 2S yellow versions, giving a clear reference to the variants named for this range. With a minimum age marking of 14 years, the set sits in the hobby-focused RC field rather than entry-level toy use. On the bench, these parts support a straightforward way to replace worn or missing chassis pieces on a compatible model. In a rebuild, the combination of holder, covers and wheelie bar helps return the 1:10 platform to a more complete running condition without guessing at unrelated parts.
Additional spares
1:10 Bokusa Wheel Set, model wheels, XL chassis
500900207€23.49
This 1:10 wheel set is made for the Bokusa BL 2S on the 1:10 XL chassis and brings the large-format look of the model back into a complete 4-wheel setup. With a diameter of 125 mm, a width of 60 mm and a 12 mm wheel hub, the dimensions are clearly defined for workshop planning, replacement work and chassis-specific preparation. The 4-piece layout covers the full running set in one pack, which is useful when a matched wheel format is needed across the whole vehicle rather than on a single corner. The stated Bokusa BL 2S variants in orange and yellow place this set within that model line, while the XL chassis reference keeps the application precise. For hobby workbench use, the combination of 125 mm diameter and 60 mm width gives a clear basis for checking clearance, stance and fit before installation. The 12 mm hub size also matters when selecting the correct mounting hardware for the chassis configuration. In the workshop, this set suits routine replacement, rebuilds after heavy running sessions or preparation of a Bokusa BL 2S kept as a ready spare. The defined dimensions make it easier to match an existing setup on the 1:10 XL platform without guesswork.
RC chassis & attachments
1:10 Bokusa, body set, XL chassis orange
500800121€34.49
The Bokusa look brings a bold competition-style presence to the bench and track, and this body set is shaped for the 1:10 XL chassis in a vivid orange finish. With the bodyshell, spoiler and mount grouped in one set, it provides the core exterior parts needed for a focused rebuild or a visual refresh. The 1:10 scale keeps the set aligned with common RC model dimensions, while the XL chassis fit gives the shell a clear application within an existing vehicle platform. The spoiler adds the rear body detail that completes the Bokusa silhouette, and the matching mount supports a consistent installation with the included shell parts. This set is aimed at model-building enthusiasts aged 14 Years and up who enjoy tuning the look of a running car with dedicated replacement parts rather than generic bodywork. The orange colour stands out clearly on the chassis and gives the finished model a strong visual identity during workshop preparation and driving sessions. On the workbench, the set suits shell replacement after wear, crash damage or a full style change on a 1:10 XL chassis. It also fits hobby sessions centred on rebuilding an existing RC car with a coordinated bodyshell, rear spoiler and mount instead of mixing separate exterior parts.
RC chassis & attachments
1:10 Bokusa, body set, XL chassis yellow
500800122€34.49
The Bokusa body set brings a bold yellow finish to 1:10 XL chassis builds and focuses on the parts that define the model's outer shape. The set includes a body shell, a spoiler and a mount, giving hobbyists the core exterior components named for this version. With the 1:10 scale stated directly in the designation, the set is aimed at model-building enthusiasts working within a familiar RC size class. The spoiler adds the rear styling element that completes the Bokusa look, while the mount is listed alongside the shell so the body setup is built around the specified chassis format rather than a generic replacement part. The yellow colour keeps the appearance easy to spot during workshop handling and running sessions. Age marking: 14 Years. Batteries are not included. This body set suits rebuilds, visual refreshes and replacement work on compatible 1:10 XL chassis projects. On the workbench, the named shell components help shape a consistent exterior; once fitted, the Bokusa design gives the model a clear, track-ready presence in yellow.
Replacement & spares for combustion models
1:10 CV10 Masterfix, tuned pipe set
500905070€37.99
A tuned exhaust layout is a classic upgrade path in nitro RC, and the CV10 Masterfix tuned pipe set brings that focus into a 1:10 format with a chrome finish and a complete group of matching exhaust parts. The set is built around a large polished muffler with a side outlet and a separate curved metal header, creating the basis for a clean engine-to-pipe connection on compatible nitro models. Alongside the two main metal sections, the set includes a coupler, a black rubber exhaust adapter, a green gasket, 2 long screws, 2 nuts, 3 tension springs and a small set screw. That combination supports both replacement work and a fresh exhaust installation where the joining points and mounting hardware need to match the pipe layout shown. The mounting flange on the header gives a defined engine connection point, while the spring-secured sections reflect the typical construction used on model nitro exhaust systems. The chrome finish adds a bright mechanical look that stands out clearly on a chassis. In workshop use, the set suits hobby builds that need a complete exhaust assembly rather than a single spare part. On a finished 1:10 nitro model, the separate header, coupler and muffler arrangement creates a purposeful technical appearance around the engine area. 14 Years marks the recommended age. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:10 Offroad Fighter Cage, body set, red
500800112€28.99
The Offroad Fighter Cage body set brings the red race look of the 1:10 XS-Chassis back into view with replacement exterior parts made for the matching Carson platform. Designed for chassis numbers 500404252, 500404253, 500404254 and 500404255, the set focuses on the visible upper structure of the buggy and restores the model's distinctive cage-style appearance. Included in the set are red body parts, a rear wing, stickers and pins. The shell sections carry the Offroad Fighter Cage styling, while the separate wing extends the rear profile with the same competition-inspired character seen on off-road buggies. Sticker elements add the final graphic accents to the bodywork, and the pins provide the fastening hardware needed for mounting the parts on the compatible XS-Chassis. This makes the set useful both for replacing worn exterior pieces and for rebuilding a model with the correct visual identity. On the bench, the set supports a clean refresh of the buggy's outer structure without changing the underlying chassis layout. Once fitted, the body panels, wing and graphic details give the model a finished track-ready presence that suits shelf display just as well as regular RC running sessions. Age 14 years and up
RC chassis & attachments
1:10 Ryken blue, body set, for XS chassis
500800117€28.99
The 1:10 Ryken blue body set brings a fresh exterior for Carson XS models with a black and blue painted bodyshell, a matching rear spoiler, decals and body clips. Designed for 1:10 XS chassis, the set focuses on the visible character of the model and gathers the key shell components in one package. The painted shell saves the step of starting from an uncoloured body and gives the Ryken design its finished look from the outset. Decals handle the graphic details, while the included clips cover the mounting points needed to secure the shell to the chassis. The rear spoiler completes the body layout and carries the line of the shell through to the back of the car. Minimum age: 14 years. This set suits rebuilds, shell replacements and visual refresh projects on compatible XS models such as 500404362 and 500404363. On the bench, it supports a clean change of appearance; once fitted, it gives the chassis a complete outer form ready for running or display between sessions.
RC chassis & attachments
1:10 Ryken green, body set, XS chassis
500800118€28.99
The Ryken green body set brings a black and green painted exterior to 1:10 XS models and gives the chassis a defined on-road character straight from the first fitting. Designed for Carson XS references 500404362 and 500404363, the set focuses on the visible parts that shape the finished model's look. Alongside the painted bodyshell, the set contains a rear spoiler, decals and body clips. That combination covers the main exterior elements needed to dress the chassis and complete the bodywork with matching details. The painted finish reduces preparation compared with an unpainted shell, while the decals add the intended markings for the Ryken design. Minimum age is 14 years. This set suits rebuilds, shell replacement after heavy use, or a visual refresh for an existing XS model. It also works well when a compatible chassis is being prepared for a new body style and the required mounting clips and matching spoiler need to be in the same set.
RC chassis & attachments
1:10 Tekuro Body Parts Set, body shell
500800119€22.99
The 1:10 Tekuro Body Parts Set brings the XS model line a complete outer refresh with a grey and green painted body shell, matched rear spoiler, decals, and body clips. Built as a replacement set for Carson XS models 500404360 and 500404361, it restores the Tekuro look with the key exterior parts grouped in one pack. The painted shell saves the extra step of applying the main colour finish, while the included decals handle the model-specific markings that give the body its final identity. The rear spoiler carries the styling through to the back of the shell and keeps the set visually consistent across the full body layout. Body clips are part of the contents as well, so the shell can be mounted with the fastening parts intended for this changeover. The product data states an assembly time in minutes, but no exact figure is given. This set suits rebuilds after wear, a damaged shell replacement, or a visual update between running sessions. For hobby benches focused on maintenance and model care, the Tekuro body set provides the exterior parts needed for a clean return to the road-ready appearance.
Additional spares
1:10 XL Chassis, model chassis, Bokusa BL 2S
500406000€21.99
The 1:10 XL Chassis brings a large-format base layout into the Carson Modelsport range, centred on a plastic chassis tray and the Bokusa BL 2S designation. With its XL format and clearly defined platform structure, this chassis suits hobby builds that start from the core frame and grow through individually chosen running components. The plastic chassis tray forms the main structural element and gives the build a dedicated base for further setup. Two colour versions are listed for the Bokusa BL 2S concept, orange and yellow, each carrying the same chassis identity with a different visual finish. The age marking is 14 years, which places this chassis in a hobby-oriented context rather than an entry-level toy range. Because the available data identifies this as a chassis rather than a complete ready-to-run vehicle, the focus stays on the base platform itself and on the scope it offers for a more individual build. On the bench, the 1:10 format gives model-building enthusiasts a familiar scale for planning a project around the chassis structure. In a collection or workshop setting, the XL layout and Bokusa BL 2S naming create a clear starting point for a custom RC model with a strong visual presence.
Ball bearings
1:10 XS Bearing Set, RC accessory
500405935€18.29
This 1:10 XS Bearing Set is made for Carson XS-Chassis vehicles and brings 15 bearing components together for maintenance, repair or replacement work on key rotating points. The set is listed for the XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363, covering Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants named in the data. Ball bearings are used where axles, wheels or drivetrain parts need clean, low-friction movement, and this set supports that function with matching components sized for the chassis family above. The product image shows a mix of larger sealed bearings and smaller metal bearing parts, giving the set the range needed for different mounting points within the model. That makes it a practical choice when a running chassis needs fresh rolling hardware rather than a full rebuild of unrelated parts. In workshop use, the set fits naturally into routine servicing after repeated driving sessions, or into a focused chassis refresh before the next run. It also suits hobby benches where a compatible spare set is kept ready for the XS platform, so repair work can stay centred on the drivetrain and rotating assemblies named for this bearing layout.
Additional spares
1:10 XS Chassis with Shaft Cover, spare part
500405930€20.99
Built around the 1:10 XS platform, this chassis with shaft cover serves as a dedicated spare part for selected CARSON models and restores the vehicle's core lower structure with the matching driveline cover in place. The black molded section combines the main tub and the cover layout in a form that matches the XS-Chassis design used across several off-road variants. Inside the chassis, the ribbed reinforcement pattern adds structural definition across the floor, while multiple screw posts and mounting holes provide the fixed points needed for compatible components from the original layout. Partition walls and integrated supports divide the interior into clear mounting zones, which helps keep the installation of matching assemblies consistent with the intended platform geometry. At both ends, the raised mounting sections and cylindrical connection areas are formed to accept the corresponding compatible assemblies used on the listed XS-Chassis vehicles. Compatibility is stated for CARSON XS-Chassis references 500404252, 500404253, 500404254 and 500404255, covering Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red. The 14 years marking is stated in the product data. As a replacement component for an existing RC model, this part suits repair work, rebuilds and the return of a worn chassis base to its original platform layout.
Axles & drive shafts
1:10 XS Dog Bone Rear, spare part drivetrain
500405937€17.79
The dog bone shaft is a core link in many RC drivetrains, carrying power from the differential to the wheel side while allowing the suspension to move. This 1:10 XS Dog bone rear set includes 2 rear drivetrain shafts for compatible Carson XS-Chassis vehicles and is intended as a dedicated spare part for maintenance or repair. The set is specified for the Carson XS-Chassis platform and matches the listed models 500404252, 500404253, 500404254 and 500404255, as well as 500404360, 500404361, 500404362 and 500404363. In the range, these references cover Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken versions. The dogbone layout uses rounded ends with cross pins to sit in the drive cups and transmit rotational force even as the rear suspension geometry changes during running. The black metal parts shown are shaped for drivetrain duty and suit workshop stock for regular wear replacement. As a rear axle spare part, this set fits hobby use where a compatible chassis is already in service and the drivetrain needs a fresh mechanical link after heavy off-road sessions or routine upkeep. Age marking: 14 years.
Wishbones
1:10 XS Lower Arms Kit Front, spare part
500405924€13.49
This 1:10 XS Lower Arms Kit Front is a dedicated spare part set for Carson XS-Chassis vehicles and focuses on the front suspension area where accurate fit matters during repair work. The set combines 2 lower arms, 2 holders and 4 pins, giving model-building enthusiasts the named components needed for a targeted replacement on the front end. Compatibility is stated for the XS-Chassis references 500404252, 500404253, 500404254 and 500404255. These correspond to the Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red variants listed in the data, which keeps the application of the set tied to clearly identified chassis versions. As a front-specific spare parts pack, the kit is suited to maintenance after wear, impact or disassembly in the suspension area. The grouped parts selection also keeps matching holders and pins together with the lower arms, which helps streamline workshop preparation for the repair. On the bench, the set fits naturally into routine chassis servicing, rebuilds after running sessions or the replacement of damaged front-end parts on compatible models. The 14 Years marking is stated in the product data.
RC shock absorbers & damper bridges
1:10 XS Oidamper Set, model accessory, 82 mm
500405966€18.99
The 1:10 XS Oidamper Set brings a dedicated suspension component to the Carson XS-Chassis platform with 4 oil shocks in an 82 mm format. Built as a model accessory rather than a universal part, the set is specified for a defined group of XS vehicles, making it a focused choice for maintenance or chassis tuning on compatible models. Compatibility is stated for the Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The listed vehicles include Stadium Fighter in blue and orange, Offroad Fighter Cage in turquoise and red, Tekuro in grey green and grey blue, and Ryken in blue and green. With 4 matching dampers in one set, the suspension layout can be equipped with the same damper type at all corners. The oil shock design works through fluid damping inside each unit, where the piston movement through oil helps moderate compression and rebound. That makes the set useful in workshop servicing after wear, in a rebuild of a compatible XS model, or when replacing existing suspension units with the same 82 mm specification. The age marking in the data is 14 years. Batteries are not included.
Pinions & gears
1:10 XS Pinion Gear 21T, spare gear
500405934€5.99
A 21T pinion gear in module 0.5 brings the drivetrain back into service on Carson XS-Chassis 1:10 vehicles. The compact drive part uses straight teeth and comes with an M3 screw, so the gear and its matching fastening hardware are supplied together for a direct replacement task. This spare gear is listed for Carson XS-Chassis references 500404252, 500404253, 500404254 and 500404255. The fitment list also names 500404360, 500404361, 500404362 and 500404363, covering Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants within the XS-Chassis range. The side hub fixing point shown on the gear works with the included screw to lock the part onto the shaft. That makes the component useful when drivetrain wear, damage or routine servicing calls for a fresh pinion. In workshop use, the small format suits the parts tray, pit box or spares case for quick maintenance between running sessions. Age marking: 14 years.
Wishbones
1:10 XS Upper Arms Kit, chassis spare part
500405929€15.49
This 1:10 XS Upper Arms Kit is a chassis spare part for compatible CARSON XS-Chassis vehicles and brings together key linkage pieces for suspension and steering work in one set. The package contents named in the data include 4 upper arms for front and rear use and 2 steering linkage parts, making it a focused replacement set for mechanical connection points on the model. The kit is specified for CARSON XS-Chassis references 500404252, 500404253, 500404254 and 500404255. Those model numbers cover Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red. The parts shown use eyelet-style ends and matching small hardware for pivoting connections within the chassis layout, which suits routine maintenance when worn or damaged links need to be exchanged. For hobby workbench use, this kind of set helps restore the intended geometry of the front or rear assembly without replacing unrelated components. With age marking 14 Years, the set fits the hobby-focused character of RC model upkeep and rebuild work. It suits repair sessions, spare-parts storage and planned chassis servicing on compatible XS models, especially when steering response or suspension articulation depends on fresh linkage parts.
Additional spares
1:10 XS Wheel Hex Nut Pin Kit, chassis spare
500405928€5.99
Built for the Carson XS-Chassis platform, this 1:10 wheel hardware set brings the key mounting parts for a complete wheel connection into one pack. The set contains 4 wheel hexes in 12 mm format, 4 M4 nuts and 4 pins, giving model-building enthusiasts the exact component group used between axle and wheel on the listed chassis versions. The wheel hexes sit at the centre of the mounting system, where the pin fixes the hex on the axle and the nut secures the wheel once fitted. That makes the set useful when original hardware is worn, misplaced during maintenance, or being replaced as a matched group across the vehicle. The 12 mm hex size is a common RC wheel interface, while the M4 nuts match the fastening point named in the data. Compatibility is stated for Carson XS-Chassis references 500404252, 500404253, 500404254 and 500404255. In workshop use, this set supports straightforward servicing on the Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red variants named for the platform. It suits bench stock for rebuilds, wheel changes and routine running repairs on the compatible XS-Chassis models.
RC chassis & attachments
1:10 XS-Chassis spare parts set
500405931€13.49
Built for the 1:10 XS-Chassis platform, this spare parts set brings together several key replacement components in one pack for a focused repair or rebuild. The set covers the Carson XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363, linking it directly to Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants. The contents combine structural and mounting parts rather than decorative add-ons. A motor and chassis cover sits alongside the battery holder, while 4 body holders restore the shell mounting points on the vehicle. The wheelie bar completes the set with a rear chassis component used on this platform. This grouping helps keep a repair centred on the exact areas that often need replacement after heavy running, rollovers or repeated body removal. The black moulded parts are laid out as separate components for clear identification during workshop preparation. In hobby use, this set suits maintenance of an existing XS-Chassis vehicle, whether the goal is replacing worn mounts, rebuilding a damaged rear section or returning a stored model to running condition. The age marking is 14 years and up.
RC chassis & attachments
1:14 Clearance Lights, model accessory, 2 pcs
500907807€11.49
Marker lights are a small detail with a big visual role on scale trucks, and this 1:14 clearance light set brings that road-going look into a model build with red and amber lenses. The set contains 2 pieces and is listed as a model accessory for hobby use. Its compact format suits detailing work where edge markers help define the outline of a cab, body or trailer in scale form. The red and amber colour combination follows the stated design and creates a clearer visual break between body panels and fitted trim. As a separate accessory, the set can support a fresh build, a repair, or the replacement of existing marker parts where the original look needs to be restored. The 1:14 scale keeps the proportions aligned with matching model projects rather than forcing an oversized lighting detail into the build. On the bench, the set fits naturally into finishing stages where small exterior parts shape the final appearance. In display use, the coloured markers add another layer of realism to trucks and trailers that rely on visible body details rather than large mechanical changes alone.
RC chassis & attachments
1:14 LED Board Side Volvo FH16, model accessory
500907808€18.99
The Volvo FH16 is one of the defining names in modern long-haul truck design, and this 1:14 LED Board Side brings that road-truck character into a scale model build through a dedicated lighting accessory. As a model supply rather than a complete vehicle, it focuses on one specific visual area of the truck and adds a more defined illuminated presence to the side section. The product data identifies this part as a 1:14 LED Board Side Volvo FH16 2A, placing it in the models and accessories range and specifically in model supplies. That makes it a fitting choice for hobby projects built around scale truck detailing, where separate lighting components help shape the final appearance. The 2A designation is part of the stated name and helps distinguish this version within the range. Batteries are not included. The age marking is 14 Years. In a workshop setting, this accessory supports focused upgrade work on a Volvo FH16 scale truck, especially where lighting details are part of the planned finish. On a display shelf or during model operation, an LED side element can strengthen the visual definition of the body layout while keeping the build aligned with the stated 1:14 scale.
RC chassis & attachments
1:8 Akuma, body set, green cyan
500801039€33.99
The Akuma body parts set brings a fresh racing look to a 1:8 RC model with a green and cyan finish and a matching rear wing. Designed as a body set, it gives hobby builds a defined outer shape for repair work, replacement use or a visual change on an existing chassis. The set is presented as body parts for the Akuma and includes the main shell, the separate wing and visible mounting hardware for installation. Tinted window graphics, black and silver areas and 4X4 markings shape the competition-inspired appearance shown in the imagery. Because this is a body parts set rather than a complete vehicle, the focus stays on the exterior components that change the model's look after wear, damage or a new build direction. The separate wing adds the finishing detail that completes the body line at the rear. On the hobby bench, this set fits naturally into rebuild sessions, shell swaps and trackside refresh work for a 1:8 platform. The included hardware supports mounting tasks, while the Akuma styling gives the finished model a bold off-road racing character once the shell and wing are in place. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 Akuma, body set, pink grey shell
500801040€33.99
The Akuma name suits the sharp, competition-style shape of this 1:8 body set. Pink and grey graphics spread across the moulded shell and separate rear wing, giving the buggy a striking race-ready look while keeping the outer panels visually matched. The shell shows pronounced aerodynamic contours, vent-style moulded detailing and prepared mounting points that guide installation on the vehicle. Alongside the main body and wing, the set includes fastening parts shown for the assembly: body clips, screws, nuts and spacers. That combination makes this set a practical choice when an existing shell needs replacement or when a fresh exterior is planned for an Akuma build. The separate wing adds another defined element to the silhouette and carries the same visual language as the shell itself. In workshop use, the set supports a straightforward body refresh with coordinated parts instead of piecing together individual exterior components. Once mounted, the bold contrast of bright pink, grey, black and white stands out clearly during running sessions and gives the model a focused off-road racing character. Warning! Not suitable for children under 14 years.
Pinions & gears
1:8 BL 13T Steel Pinion Gear, model accessory
500906202€10.79
In 1:8 model racing, small drivetrain parts shape how power reaches the wheels. This BL 13T Steel Pinion Gear hard is a compact transmission component for brushless 1:8 setups, built to sit on the motor shaft and pass rotation into the geartrain through its 13-tooth profile. The gear combines a central bore with a side fastening point, a layout that supports fixed mounting in the drive assembly. That construction matters during servicing, because a pinion must sit in the correct position to engage the matching gear evenly. The steel specification given in the data places the focus on the working surface that handles direct tooth contact. As a dedicated replacement or workshop spare, this part belongs in rebuilds, routine maintenance and gearing updates where worn drivetrain hardware needs to be exchanged with the correct tooth count. On the bench, the pinion fits naturally into motor and transmission work on 1:8 brushless models. In running setups, it serves as the small but essential link between motor output and the rest of the drivetrain, making it a useful component to keep ready for repairs and setup changes. Warning! Not suitable for children under 14 years.
Pinions & gears
1:8 BL 14T Steel Pinion Gear, RC accessory
500906203€10.79
In 1:8 brushless model driving, small transmission parts have a direct effect on how power reaches the wheels. This 14T steel pinion gear is made as a compact RC accessory for compatible 1:8 BL setups, where the tooth count becomes part of the gearing choice. The steel construction places the focus on a core drivetrain component rather than a cosmetic add-on. As a pinion gear, it sits at the motor side of the transmission and works with a matching spur gear to pass rotation into the rest of the drive system. The 14-tooth layout is a concrete specification for repair work, replacement of a worn gear, or a deliberate gearing change within an existing setup. The product image also shows a central threaded opening and a perpendicular threaded side hole, indicating a fastening arrangement designed for mounting on a shaft with a set screw. This kind of workshop part suits bench maintenance, rebuilds after heavy running, and targeted tuning of compatible RC vehicles. The age marking is 14 years+, matching its role as a technical hobby component within model-building and RC maintenance. Warning! Not suitable for children under 14 years.
Pinions & gears
1:8 BL 15T Steel Pinion Gear, RC spare part
500906204€10.79
In 1:8 brushless RC setups, the pinion is the small part that sets the first link in the drivetrain. This BL 15T Steel Pinion Gear uses 15 teeth and a steel body to mesh with the main drive gear in compatible model vehicles, giving hobby work a concrete, mechanical focus right at the motor shaft. The gear form shown in the data is built as a compact cylindrical pinion with straight outer teeth, a central bore and a side threaded hole for fastening. That layout allows the pinion to sit on the shaft and be fixed in place with a grub screw, an important detail when the motor's rotation has to transfer cleanly into the transmission. The 15T specification also matters in workshop planning, since tooth count is one of the key figures used when replacing a worn pinion or matching a drivetrain setup to an existing spur gear. As a steel spare part, it fits naturally into maintenance, repair and tuning work on 1:8 brushless RC models. On the bench, this kind of component is used during drivetrain service, rebuilds or gearing swaps where a fresh pinion restores proper meshing between motor and transmission. Age marking: 14 Years. Warning! Not suitable for children under 14 years.
Pinions & gears
1:8 BL 16T Steel Pinion Gear, model accessory
500906205€10.79
A small drivetrain part can make a clear difference in how a 1:8 brushless model puts power down. This BL 16T steel pinion gear is built as a dedicated model accessory for RC vehicle transmissions, with 16 teeth forming the drive interface between motor and spur gear. The gear uses steel for the toothed section, giving this heavily loaded contact point a material suited to repeated meshing in fast-running setups. Its compact cylindrical form keeps the part focused on the job of power transfer rather than adding bulk to the motor mount area. The central bore fits over the motor shaft, while the side fixing point is designed for a fastening screw that locks the pinion in place. That combination supports accurate positioning on the shaft and a direct mechanical link from the motor into the rest of the drivetrain. The 1:8 scale reference places it in the class of larger RC models where gearing choice plays a practical role in setup and maintenance. Whether used as a replacement for a worn gear or as part of a drivetrain change, this 16T pinion belongs in the workshop stock for compatible brushless RC vehicles. It suits rebuilds, routine servicing and gearing adjustments where a specific tooth count is needed to match the transmission layout. Warning! Not suitable for children under 14 years.
Additional spares
1:8 Drakuro Chassis, RC chassis, 4WD
500406050€41.99
The 1:8 Drakuro chassis brings a 4WD layout into a dedicated RC platform built around the fundamentals that matter to model enthusiasts. As a chassis-only format, it centres the project on the rolling base itself, creating a clear starting point for a build shaped by component choice, body selection and individual setup decisions. Within the Models & Accessories range, this Drakuro version stands as a focused foundation rather than a finished vehicle, which gives the chassis a different appeal from ready-to-run formats. The 4-wheel-drive arrangement distributes drive across all 4 wheels, supporting a composed feel when the model is set up for varied running conditions. The chassis designation also signals room for a more personal configuration, where electronics, bodywork and finishing direction can be chosen to match the intended use. Assembly time is stated in minutes in the product data, underlining its place in the hands-on side of the hobby. A battery is required separately. On the bench, the Drakuro chassis suits projects that begin with the platform and grow through careful parts selection. Once equipped, the 1:8 format and 4WD concept make it a strong base for builders who enjoy shaping how an RC model looks, responds and runs through their own setup choices. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 KoD 2.0 Body-Set, car body, green
500801037€33.99
The KoD 2.0 Brushless body set in 1:8 scale brings the race-buggy look of the model back into view with a green replacement shell and a separate matching rear wing. As a spare part for 500409095, this set is intended for the corresponding Carson model and focuses on the visible outer bodywork rather than the running gear underneath. The shell is shown with a bold green and black layout, honeycomb graphics and tinted window styling that give the body a sharp off-road character. Markings such as King of Dirt 2.0, KOD 2.0, Brushless and the number 1 are already part of the displayed design, so the replacement keeps the model line recognisable after a body change. The rear wing carries matching graphics and mounts as its own component above the back section. Small fastening parts shown with the set include 2 screws, 2 clips and 2 black fixing pieces for the body assembly. This kind of spare bodyshell suits workshop swaps after heavy running sessions, visual refreshes between outings, or a rebuild of a worn shell on the matching chassis. For hobbyists working on a KoD 2.0 Brushless, the set restores the model's signature appearance with the body elements grouped together in one replacement package. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 KOD 2.0 Body-Set, car body, orange
500801036€33.99
The 1:8 KOD 2.0 Body-Set brings the KingofDirt look back onto the buggy with an orange finish, bold white and black graphics, and a body shape made for the KOD 2.0 Brushless designation in the data. As a spare part, this set focuses on the visible outer structure of the vehicle and gives the model a fresh, track-ready appearance. The shell uses a competition-style layout with marked window areas, angular surfaces, and a matching rear wing that continues the graphic theme across the back of the buggy. The image shows hexagon pattern details, KO 2.0 markings, and number graphics on the wing side plates, adding a clear racing character to the body package. Mounting hardware is also shown with the set, including small fastening parts for fitting the shell and wing to the vehicle. This keeps the replacement focused on the body assembly rather than the chassis or drive components. In the workshop, the set suits a worn shell swap or a visual refresh between running sessions. On the track, the orange body and rear wing give the buggy a strong competition look that fits the KOD 2.0 Brushless style while keeping the model's exterior consistent. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 KoD Brushless, body kit, RC bodyshell
500801025€31.49
The KoD Brushless body kit brings the 1:8 buggy back to its sharp, race-bred silhouette with a polycarbonate shell shaped for the model's off-road stance. Digital camouflage graphics in black, grey, white and blue give the surface a striking competition look, while the dark tinted windscreen area adds contrast across the upper section. The shell is formed with pronounced contours and side vent details that define the buggy profile from nose to rear deck. Pre-cut mounting holes save workshop time when replacing a worn cover, and 2 metal body clips are included for fastening the shell to the body posts. As a dedicated body kit, this part focuses on the outer structure and visual finish of the model rather than the chassis hardware underneath. In the workshop, it suits a damaged shell swap before the next run or a visual refresh between driving sessions. On the buggy, the finished cover restores the complete look of the KoD Brushless and gives the model a clean, track-ready presence on dirt sections and off-road layouts.
Replacement & spares for combustion models
1:8 Masterfix tuned pipe set, exhaust system
500905071€39.99
Built around the classic layout of a tuned nitro exhaust, the 1:8 Masterfix tuned pipe set brings a chrome-finish exhaust system to RC car builds that use a separate header and resonator chamber. The polished metal surfaces, bulb-shaped pipe body and angled rear outlet give the assembly a purposeful competition look on the chassis. The set is configured as a 2-piece exhaust arrangement with a curved header pipe and a main muffler section joined by a spring-retained coupling. A sealing ring sits at the connection point, and a pressure nipple is mounted on top of the chamber for the fuel-pressure line used on nitro layouts. These details make the assembly easy to place and route within a 1:8 vehicle build while keeping the pipe geometry clear and compact. The chrome finish also makes the exhaust stand out against anodised alloy parts, dark chassis plates and body cut-outs. Mounted on a 1:8 nitro RC car, the exhaust adds the visual character associated with tuned engine setups, whether the build is being refreshed with replacement parts or assembled with a more focused racing style. Age marking: 14 Years. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 Virus 4.1 Body Set, bodyshell
500801020€39.99
The Virus series brings competition-inspired RC styling into 1:8 scale, and this Virus 4.1 Body Set carries that look in a ready-finished replacement shell. The set is made for the Virus 4.1 Brushless and combines the bodyshell with a matching rear wing, so the outer appearance can be renewed with parts that suit the model line. The shell comes pre-painted in black, red and neon green and uses a honeycomb graphic with tinted window details for a sharp race layout. Visible Virus 4.1 Brushless markings on the body connect the design directly to the series, while the wing adds the low, wide finishing touch at the rear. Small fitting parts are included in the set as body clips, screws and washers, supporting a straightforward refit with the matching hardware kept together. This makes the set useful when a worn shell needs replacing or when an existing chassis is being refreshed with the same visual identity. On the bench, the set suits rebuilds, repairs and visual overhauls of a Virus 4.1 Brushless model. Once fitted, the shell and wing restore the familiar track-ready appearance that defines the series in motion and at rest. Warning! Not suitable for children under 14 years.
RC chassis & attachments
1:8 Virus V21, body set, blue bodyshell
500801038€33.99
The 1:8 Virus V21 body set brings a fresh outer shell to the buggy with a blue finish, angular racing graphics and a separate rear wing that carries the same visual theme. Designed as a spare part for 500204036, the set focuses on the visible upper body assembly rather than the chassis underneath, making it a direct replacement when the original shell needs renewing. The main shell shows a low, streamlined profile with pronounced wheel arch cutouts, roof ridges and a dark windscreen area that reinforce the competition-inspired look. Blue, white, black and silver graphics run across both body pieces, while VIRUS markings on the shell and wing keep the model identity consistent. The included fixing parts cover the essential mounting points with 2 body clips, 2 screws and black wing hardware for the rear section. On a workshop bench, during a rebuild between running sessions or as part of a visual refresh before the next outing, this set restores the Virus V21 with the correct 1:8 body shape and matching wing layout. 14 Years is the stated age marking. Warning! Not suitable for children under 14 years.
Axles & drive shafts
Akuma Alu-hex Hub 17 mm RC Wheel Adapter
500405988€12.79
The Akuma Alu-hex hub 17 mm is a compact RC spare part set for wheel mounting and running gear service on compatible Akuma model vehicles. With 2 machined aluminium hub pieces, 2 matching nuts, 2 metal pins and 2 black set screws, the set brings together the fastening hardware needed for a complete hub replacement at the wheel end. The 17 mm hex format defines the wheel interface, while the threaded hub design and separate locking hardware point to a mechanical assembly that is secured in several steps rather than a simple push fit. The metal pins and set screws support alignment and retention within the hub setup, helping restore the intended connection between axle area and wheel mount when original parts are worn, lost or damaged. The silver finish keeps the parts easy to identify during bench work, and the compact format suits parts storage in an RC workshop or field box. This kind of hardware fits naturally into rebuilds, maintenance sessions and spare-parts stock for regular RC driving. Whether a model is being refreshed after heavy use or prepared with replacement wheel-end hardware before the next run, this set supplies the core mounting parts in one pack. Warning! Not suitable for children under 14 years.
RC chassis & attachments
Akuma Battery Holder Set, model accessory
500405984€27.99
The Akuma Battery Holder Set adds a dedicated battery mounting solution to the model layout with a long tray, matching cover plate and support brackets. Black moulded parts and a screw-fastened structure create a clean, component-based setup that suits hobby work on 14 Years+ models and keeps the battery area clearly organised. Alongside the main tray, the set includes a rectangular frame bracket with upright arms, a clamp-style bracket with mounting tabs and a side loop, a small spacer block, 6 black screws and 2 wide hook-and-loop straps. This combination supports a more tailored installation around the chassis area, with the straps wrapping the battery pack while the rigid parts define its position. The separate brackets also help adapt the holder to the available mounting points rather than relying on a loose battery placement. In workshop sessions, the set supports battery installation, refit work and replacement of worn holder parts on the Akuma. It also suits rebuilds where a clear, screw-mounted battery position is needed for a neat internal layout and repeatable pack changes between driving sessions. Warning! Not suitable for children under 14 years.
RC chassis & attachments
Akuma Bodyholder Kit, RC spare part set
500405983€6.59
The Akuma bodyholder kit is a dedicated RC spare part set for front and rear body mounting points, built to return the correct connection between chassis and bodyshell on the matching Akuma model. With a minimum age marking of 14 Years, it sits in the hobby and model-building range rather than general toy use. The set includes a structural holder piece, a mounting plate, 2 matching inserts and 2 screws. The black moulded parts are formed for mechanical fastening, with the plate using multiple mounting holes and the main holder section shaped to seat the inserts and secure the assembly. This layout supports a direct replacement of worn, damaged or missing bodyholder components without introducing unrelated parts. As a model supply in the Carson Modelsport range, the kit is aimed at maintenance work that keeps an RC vehicle ready for continued running. In workshop use, the parts suit routine repairs after body mount wear, impact damage or lost hardware. The front and rear application makes the set useful when restoring the shell position and attachment points so the vehicle can return to its intended fit and appearance. Warning! Not suitable for children under 14 years.
RC chassis & attachments
Akuma Motorholder, model accessory mount
500405986€8.49
The Akuma Motorholder is a dedicated mounting part for the Akuma platform, built to secure the motor area with a precisely shaped metal bracket. Its rectangular form combines recessed fixing points with a large central opening and a U-shaped cutout, creating the clearances needed around the drive section while keeping the mount closely integrated with the surrounding assembly. The top face uses countersunk holes so the 5 included hex screws sit flush once fitted. Elongated slots add adjustment range during installation, which supports accurate motor positioning when replacing worn parts or rebuilding the drivetrain section. Three threaded side holes extend the mounting options for adjoining chassis elements, while the darker side walls and machined edges underline the technical character of this spare part. As a focused workshop component rather than a decorative add-on, the mount is shaped around fit, fastening and alignment inside the Akuma layout. This accessory suits bench repairs, routine maintenance and parts replacement on an Akuma model marked 14 Years and up. In a rebuild setup, the bracket forms a defined connection point for the motor section, helping keep the chassis assembly orderly and correctly aligned. Warning! Not suitable for children under 14 years.
Pinions & gears
Akuma Pinion Gear 14T Model Accessory
500405985€6.89
The Akuma Pinion Gear 14T is a drivetrain accessory for compatible Akuma model vehicles, built around a clear 14-tooth specification that helps identify the correct replacement or maintenance part within an RC setup. In workshop use, that concrete tooth count gives hobbyists a direct reference when checking an existing transmission configuration or preparing a repair. As part of the model supplies range, this gear suits routine servicing, parts organisation and planned spares stocking for RC vehicles in the Akuma line. The product data identifies it as a separate accessory rather than a complete vehicle, which makes it relevant for ongoing upkeep of a running model. The designation Motor Pinion 14T points to its role in the drive system, where a pinion gear forms part of the connection between motor output and the rest of the drivetrain. The listed references 500409082 and 500409083 link the gear to the Akuma context named in the data. On the hobby bench, a dedicated replacement gear helps keep maintenance focused and parts selection straightforward when an existing drivetrain needs attention. The 14 Years age marking is stated in the product data, placing this accessory in the model-building and RC hobby segment. Warning! Not suitable for children under 14 years.
Additional spares
Akuma Steering Rack, model accessory, aluminum
500405990€8.49
The Akuma steering rack brings a key front-end control component into the workshop as an aluminum replacement part for Carson Akuma models. Its role sits directly in the steering assembly, where the rack forms the connection point for the linkage and supports the intended movement of the front wheels through the chassis layout. The part is described as an Alu steering rack and is intended as a model accessory within the Models & Accessories range. As a dedicated spare part rather than a universal fitting, it matches the Akuma designation named in the data and gives repair and maintenance work a clearly defined replacement for the steering area. The aluminum construction adds a specific material choice to this component, making it a relevant search term for hobbyists who maintain, rebuild, or refresh running gear parts. With the steering plate named in the source data, the part also speaks to focused servicing of the control hardware rather than a general upgrade bundle. In practical use, this kind of replacement belongs on the bench during routine maintenance, after wear in the steering mechanism, or when a build needs the correct Akuma-specific part to return the front end to working order. The 14 Years age marking is stated in the product data. Warning! Not suitable for children under 14 years.
Wishbones
Akuma Tie-Rods Kit, RC spare part, 4 pcs
500405981€12.79
The Akuma tie-rods kit supplies 4 replacement parts for front and rear linkage work on compatible RC vehicle setups. As a dedicated spare part set, it gives model-building enthusiasts the core pieces needed when worn linkage components need to be exchanged and the chassis brought back into running condition. The set is identified in the data as a front and rear tie-rods kit and is intended for Akuma models. That makes it a focused choice for maintenance, repair, or parts stock in an RC workshop rather than a general accessory with unclear fit. The included 4-piece format suits jobs where several connection points need attention at once, reducing the need to source individual rods separately. The product image shows black moulded linkage components with mounting holes and small metal posts, indicating a mechanical connection role within the steering or suspension layout. Such parts are central wherever wheel guidance and chassis articulation depend on clean, correctly aligned link points. In practice, this kind of spare set fits naturally into routine rebuilds after heavy running sessions, collision damage, or scheduled chassis servicing. It also works well as a shelf-ready replacement set for hobby benches where compatible Akuma parts are kept available for fast turnaround between repair and the next drive. Warning! Not suitable for children under 14 years.
RC shock absorbers & damper bridges
Alu damper 75 mm, RC damper set for 1:10
500405755€15.49
Suspension tuning plays a central role in how a 1:10 RC chassis settles, rolls and tracks through corners, and this aluminium damper set brings that adjustment point into a compact 75 mm format. The set contains 2 dampers with coil-over springs and a metal construction that suits replacement work, rebuilds and workshop-led setup changes on compatible models. The dampers use threaded aluminium bodies, allowing the spring preload to be altered directly on the unit rather than through fixed-position parts alone. That layout helps when ride height and suspension response need to be matched more closely to the chassis setup already in use. The eyelet mounting points at the upper and lower ends follow a familiar RC suspension format, giving each damper a clear mechanical role between chassis and suspension arm. The included scale reference of 1:10 places the set within a widely used model category, where exact component length and mounting style are central to fitment. In practice, a pair like this suits maintenance benches, parts boxes and planned suspension updates on RC cars that use compatible 75 mm dampers. Whether replacing worn units or refining a running setup, the 2-piece configuration supports axle-based installation and keeps the focus on controlled suspension movement rather than improvised parts matching.
RC tires & rims
Alu Hex Hub 17 mm, RC wheel hub set
500405896€13.49
Small drivetrain parts can make a decisive difference in an RC build, and this Alu Hex Hub set brings a clear mechanical upgrade point with 17 mm wheel mounting hardware. The set includes 2 blue anodized aluminium hub adapters with a hexagonal base and threaded body, giving model builders a defined interface for wheel fitment and axle connection. Each adapter is paired with a matching hex nut, while the included silver pins and black set screws complete the fastening hardware for installation. The hollow cylindrical opening and side hole shown on the hub design indicate a locking layout built around pin retention and screw fixing rather than a simple push fit. That construction supports controlled assembly work when worn parts need replacing or a compatible setup is being refreshed. With 2 hubs in the pack, the set is suited to targeted repair work on one axle position. On the workbench, the compact format keeps the focus on accurate fitting, clean fastening, and dependable mechanical engagement between axle and wheel mount. The 14 years+ age marking places the set in the hobby segment, where tuning, maintenance, and parts changes are part of the hands-on appeal of RC model ownership.
Ball bearings
Ball bearing 10x15x4, model accessory, 10-pack
500904019€13.99
Small precision parts make a visible difference in model mechanics, and this set brings 10 ball bearings in the 10 x 15 x 4 mm size for compact rotating assemblies. The metal bearings suit hobby work from 14 years and up where exact dimensions are needed for replacement, maintenance, or fresh installation in a model setup. Each bearing uses the stated 10 mm inner diameter, 15 mm outer diameter, and 4 mm width format, giving a clear reference for matching existing bearing seats and axle points. The pack count of 10 supports workshop stock as well as multi-point servicing on a single build. In model applications, ball bearings are used where shafts and rotating parts need guided movement inside a tight mechanical layout. The compact format makes them relevant for assemblies where space around the axle or housing is limited. This set works well for planned repair sessions, parts replacement after wear, or keeping matching spares ready alongside other model supplies. The uniform size across all 10 bearings helps maintain consistency when several positions in the same assembly require the same specification. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 3x6x2,5, model accessory
500904001€13.99
This 3x6x2,5 ball bearing set brings a core workshop consumable into model maintenance with 10 matching bearings for repairs, rebuilds and routine parts replacement. The compact format suits assemblies that rely on small rotating hardware, and the metal construction matches the technical character expected in model servicing. The 10-piece count gives a useful reserve for ongoing bench work, whether a single bearing needs changing or several matching points in one assembly are being refreshed together. The supplied storage tubes help keep the bearings grouped by size between jobs, which is especially useful when a work area already holds screws, axles and other small hardware. With one clearly defined bearing size, the set stays focused on compatibility for applications that require 3x6x2,5 dimensions rather than mixing formats in one pack. On an RC or model-building bench, these bearings fit naturally into regular upkeep, from replacing worn running parts to preparing spares before a rebuild starts. The set also suits organised parts storage, where clearly separated small components speed up maintenance and reduce time spent sorting through mixed hardware. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 3x7x3, model accessory, 10-pack
500904002€13.99
Ball bearings are a core detail in model mechanics, and this 10-pack brings the exact 3 x 7 x 3 mm size into the workshop for precise replacement and setup work. The compact format suits small rotating assemblies where clean running and an accurate fit matter, whether the bearing is used in a fresh build or during routine maintenance. Each bearing is a metal component designed for model applications that rely on controlled rotation at compact mounting points. The pack of 10 supports repeated service jobs, keeps matching spares together and helps maintain consistency across assemblies that use the same dimension. The 3 mm inner diameter, 7 mm outer diameter and 3 mm width make the size easy to match against existing parts before installation. This makes the set useful for hobby benches where exact dimensions guide part choice more than broad category labels. In practice, the bearings fit naturally into repair sessions, rebuilds and parts organisation for model projects from 14 years. Stored as a dedicated size set, they are ready when a worn bearing needs replacing or when a mechanical assembly calls for the same format at several rotating points. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 4x8x3, RC spare part, 10-pack
500904004€13.99
Small bearings make a big difference wherever rotating parts need a clean, precise running action. This 10-piece set of ball bearings in 4 x 8 x 3 mm format brings a compact spare-parts solution to model building, workshop upkeep and routine replacement work on hobby machines. Each bearing is sized for fine mechanical assemblies where limited space calls for a compact outer diameter and a slim 3 mm width. The metal construction suits repeated installation in small rotating points such as hubs, shafts or axle-mounted components, where reduced friction supports smoother movement than a plain bushing setup. With 10 matching bearings in one pack, the set also helps keep servicing consistent across multiple positions in the same build instead of mixing different sizes. The format works well for restocking a pit box, organising a parts drawer or preparing a rebuild bench before maintenance starts. Whether the task is replacing worn running gear bearings or keeping fresh spares ready for the next repair session, the 4 x 8 x 3 mm size gives model-building enthusiasts a clear, exact reference for compatible mechanical jobs. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 4x9x4, model accessory, 10-pack
500904005€13.99
Ball bearings are a core part of smooth-running model mechanics, and this 10-pack in 4x9x4 mm format supplies a compact, exact-size solution for hobby builds, servicing tasks, and part replacement. The metal construction suits rotating assemblies where a small bearing is needed to guide shafts or axles with a clean, precise running action. Each bearing measures 4x9x4 mm, making the set useful wherever this specific inner diameter, outer diameter, and width are required in a model setup. With 10 matching bearings in one pack, several mounting points can be equipped in one session, or spare pieces can stay ready for later maintenance. The format shown in the product data focuses on a miniature bearing size often used in detailed mechanical layouts rather than large hardware applications. In the workshop, the set supports routine replacement of worn running parts, careful rebuilding of compact assemblies, or stocking common service components for future projects. The age marking of 14 years and up matches the small-part character of this accessory and the precise handling involved in model-building and repair work. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 5x10x4, RC spare part, set of 10
500904008€13.99
Ball bearings are among the smallest parts in a model, yet they shape how smoothly a drivetrain or rotating assembly works. This set contains 10 shielded ball bearings in 5 x 10 x 4 mm size, giving model builders a precise spare part for compatible RC and mechanical applications. The compact format suits installations where a clean seat and controlled rotation matter. Each bearing uses an inner ring, outer ring and shielded sides to support guided movement at matching mounting points. In model workshops, parts in this size can be used at axles, transmission points or other rotating assemblies where the specified dimensions are required. The pack of 10 also makes the set practical for routine maintenance, since several positions on one model can call for matching bearings. Whether used to replace worn parts or to stock the bench for future service work, the set adds a useful supply of identical running components. For hobbyists working on RC vehicles and model mechanisms, exact dimensions such as 5 x 10 x 4 mm are the key detail for selecting the right bearing for the job. Warning! Not suitable for children under 14 years.
Ball bearings
Ball bearing 5x11x4, model accessory, 10-pack
500904009€13.99
Ball bearings are among the smallest parts in a model build, yet they shape how a drivetrain, axle or transmission feels in motion. This set provides 10 shielded ball bearings in 5 x 11 x 4 mm format for model applications that rely on clean, controlled rotation. The metal bearings are suited to rotating assemblies such as shafts, wheel mounts and gearbox positions where a matching size is required. Their compact dimensions make them useful for replacement work on worn running gear as well as for fresh assembly projects that call for this exact bearing format. In workshop use, a pack of 10 gives a practical quantity for servicing several mounting points within one vehicle or for keeping spares ready between rebuilds. The shielded design supports tidy running in enclosed mechanical areas where dependable movement matters. With age marking 14 years+, the set fits hobby-focused model work rather than entry-level play use. Whether the task is restoring freer movement to a used chassis, refreshing a transmission during maintenance, or stocking the bench with essential wear parts, these 5 x 11 x 4 mm bearings add a precise mechanical component that belongs in regular model service. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 5x8x2.5 mm, Model Spare Part
500904006€13.99
This set of 10 ball bearings in 5 x 8 x 2.5 mm brings a precise spare-part format to model maintenance and compact mechanical assemblies. The small metal bearing size suits applications where a matching inner diameter, outer diameter and width are needed to restore clean rotation in a confined space. Loose bearings are shown alongside clear storage tubes, keeping the matching parts grouped between workshop sessions and making it easier to keep identical replacements on hand. In hobby models and RC running gear, miniature bearings of this size can be used wherever a rotating shaft needs guided support inside a compact housing. The metal construction fits the technical character of repair benches, parts boxes and regular servicing routines. With 10 identical pieces in one pack, the set also supports replacing several wear points with the same dimension rather than mixing sizes. The 5 x 8 x 2.5 mm format suits careful rebuilds, routine maintenance and stocking up on frequently used spares for model work. Age marking: 14 years and up. Whether the task is refreshing a rolling assembly or preparing backup parts for future repairs, this bearing set adds a clear, exact dimension to the workshop drawer. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 5x9x3, model accessory, set of 10
500904007€13.99
Small bearings make a big difference wherever rotating parts need clean, controlled movement. This set contains 10 ball bearings in 5 x 9 x 3 mm format, giving model-building enthusiasts a compact replacement or workshop supply for mechanical assemblies that rely on accurate shaft support. The 5 mm inner diameter, 9 mm outer diameter and 3 mm width suit installations where space is limited and the fit has to match existing hubs, axles or transmission points. As metal rolling bearings, they are intended for positions where fixed bushings are not the right match and a dedicated bearing is required instead. The pack of 10 supports full maintenance jobs, partial rebuilds or keeping matching spares ready for future service work. Their small format also makes them relevant for several rotating points within the same model rather than a single repair location. On the workbench, these bearings suit careful replacement tasks in hobby models and accessories with compact running gear or drivetrain layouts. During servicing, the defined dimensions help when matching worn parts to the correct size, while the 10-piece quantity leaves room for repeated use across ongoing workshop projects. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 6x10x2.5, RC spare part, 10-pack
500904010€13.99
Small running parts make a clear difference in model engineering, and this set of 10 ball bearings brings a precise 6 x 10 x 2.5 mm format to repair, replacement and workshop stock. The open version without seal suits builds and maintenance jobs where the bearing layout itself is part of the required fit. Each bearing is sized with a 6 mm inner diameter, 10 mm outer diameter and 2.5 mm width, giving hobbyists a defined format for mechanical assemblies that rely on closely matched dimensions. The pack of 10 supports work across several mounting points instead of limiting a project to a single replacement. In RC and model applications, bearings like these are typically used where rotating parts need clean, consistent movement within a compact installation space. The metal bearing construction shown in the product presentation underlines the technical character of this spare-parts set. Whether the task is refreshing a used model, replacing worn running hardware or keeping core workshop supplies ready between builds, this bearing set fits naturally into the parts box. The compact size and multi-pack quantity also suit planned servicing where several identical bearings are needed within the same assembly. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 8x12x3.5, spare part, set of 10
500904015€13.99
Ball bearings are core running components in model mechanics, and this set provides 10 matching pieces in an 8 x 12 x 3.5 mm size for repair, maintenance and parts replacement. The compact metal format suits assemblies that rely on controlled rotation and a precise seat inside the surrounding mechanism. Each bearing uses an inner ring, outer ring and ball race construction to support rotating shafts while reducing direct sliding contact between parts. That makes this set a practical choice for hobby benches where wheel carriers, transmission points or axle-mounted components need fresh running hardware. The 10-piece quantity also helps when several positions in one model use the same size, or when spare bearings are kept ready for later service intervals. On a workbench, the set supports rebuilds, routine servicing and targeted replacement of worn bearings in model vehicles and related hobby mechanisms. The 14 Years age marking places it within the hobby and model-building range, where precise small parts belong alongside planned maintenance and careful installation. Warning! Not suitable for children under 14 years.
Ball bearings
Ball Bearing 8x16x5, RC spare part, set of 10
500904017€13.99
Ball bearings are among the smallest parts in an RC build, yet they have a direct effect on how cleanly moving assemblies run. This set provides 10 metal ball bearings in 8x16x5 mm size, giving model-building enthusiasts a clearly defined spare part for service work, replacements and workshop stock. The 8 mm inner diameter, 16 mm outer diameter and 5 mm width make the format easy to match to an existing assembly when a worn bearing needs to be exchanged. The circular metal construction is suited to rotating mounting points where low-friction movement matters, and the quantity of 10 supports multiple replacement points within one model or across several hobby projects. The close-up product image shows a compact, silver-coloured miniature format with enclosed bearing faces, consistent with precision parts used in RC drivetrains and rolling assemblies. In regular workshop use, a pack like this fits naturally into rebuild sessions, routine maintenance and parts-box organisation. It can be kept ready for axle carriers, wheel mounts, transmission points or other compatible mechanical locations that require the exact 8x16x5 mm specification. Age marking: 14 years and up Warning! Not suitable for children under 14 years.
RC chassis & attachments
Body Pins 14 mm, RC model fasteners, 10 pcs
500908058€3.79
Small fastening parts make a clear difference in RC model upkeep, and these black body pins are built for exactly that workshop role. The pack contains 10 clips in a 14 mm size, giving model builders a practical stock of matching retainers for body shell mounting and routine replacement. Each pin uses a bent wire clip form with a looped top and crossed prongs, the familiar mechanism that slides through a body post hole and locks the mounted section in place. That simple shape supports quick handling when a shell needs to come off for access to the chassis area or go back on after maintenance. Keeping several identical clips on hand also helps maintain a uniform fit across compatible mounting points instead of mixing different spare parts. In the workshop, at the bench or in the field box, a 10-piece pack covers the small losses that often interrupt running sessions. The black finish keeps the hardware discreet on many body styles, while the compact format suits RC vehicle maintenance where secure, removable fastening is needed. Age 14 Years Warning! Not suitable for children under 14 years.
RC Spare Parts
Wherever driving fun, top speed and daring maneuvers are involved, wear and the occasional “accident” are inevitable. In RC model sports, RC spare parts therefore play a major role. With the right replacement parts, remote-controlled vehicles can be repaired, improved and prepared for their next run.
What are RC spare parts?
RC spare parts are – just as the name suggests – replacement parts for RC models such as remote-controlled cars, motorcycles, boats, aircraft and more. These parts are used when a model has taken damage or when a worn component needs to be replaced. In addition, the wide range of RC spare parts can be used for tuning and optimizing the vehicles.
What should you consider when choosing RC spare parts?
RC spare parts have to do one thing above all: fit the respective model. As a builder, you should make sure that the RC model you are working on is compatible with the spare part of your choice, because only then will installation be successful. In addition to compatibility and correct sizing, quality should also be a key factor when purchasing RC spare parts.
Carson RC spare parts – a product overview
To help you get the best performance out of your models, we offer RC spare parts in the following categories:
Replacement & spares for combustion models
If you need spare parts for your nitro model – whether engines, gearboxes or drive shafts – Carson has you covered. Choose, install and get back on the road!
RC shock absorbers & damper bridges
Your RC car no longer absorbs bumps properly? Then it’s time for new shock absorbers or shock towers. Simply replace them and regain full control!
Screws
Small parts with big impact: whether replacing a lost screw or reassembling your model entirely – we offer every screw you need.
Ball bearings
For a smoothly running drivetrain: ball bearings reduce friction and improve efficiency. Your model will thank you!
Pinions & gears
The drivetrain doesn’t run as smoothly anymore? New pinions or gears will get you back on track – precise, powerful and reliable.
Axles & drive shafts
Cracks or wear in the driveshaft? No problem – Carson offers fitting axles and shafts for many models.
Wishbones
If steering becomes stiff or a crash has left its mark: with new suspension arms your RC vehicle is quickly ready for use again.
RC chassis & attachments
Ready for a new look? Replace damaged bodies or upgrade with spoilers and accessories – for fresh style and full performance!
Additional spares
In addition to the categories above, we also offer a large variety of other spare parts for many different models. Browse the category and find exactly what you need.
RC spare parts: always well prepared with Carson
Thanks to the wide assortment and extensive selection of spare parts, Carson is the top destination for anyone looking to repair or upgrade their RC model. Take a look in our shop and discover high-quality RC spare parts that will prepare your model for its next driving adventure.