RC truck accessories
Level up your drive with Carson RC truck accessories: Lights, wheels and more to customize your RC rig the way you want it.
Tyres & rims
14: Fulda EcoControl Tire (2)drive axles
500907014€26.49
500907014 - the 1:14 Fulda EcoControl drive tires (2) give your truck the realistic appearance of original Fulda road tires. Hollow chamber tires, Ø 82 mm, width 20 mm, inner diameter 44 mm. Especially for drive axles: low rolling resistance and high traction, also suitable for steering axles. Suitable for TAMIYA tractors and TAMIYA/CARSON trailers. Suitable inserts: 500907516.
Electronics
15x10mm Orange Flashing Light w/ E.(2)
500907125€79.99
The Carson rotating beacon 15×10 mm (500907125) in a set of two gives models an authentic warning light: two orange lights, base Ø 14.5 mm, height 15 mm, swivels up to 5°. Four bulbs flashing in series create the all-round effect; SMD flashing electronics via a free receiver channel. Ready-to-connect circuit board with heat-shrink tubing and Graupner J/RF cable; ideal for roof mounting on cabs and trailers.
Electronics
1:14 12V LED-PCB 7-Section taillight
500907388€57.99
500907388 1:14 12V 7-chamber LED board offers model building enthusiasts a precise, paired rear light upgrade (left and right) for 1:14 models. With SMD LEDs, common positive pole and approx. 250 mm cable length, it implements four functions: Blinker, tail light, brake light and reversing light. Suitable for item 500907037; rear light not included; not compatible with TAMIYA MFC.
Electronics
1:14 12V Roof lamp (2) SMD LED PCB
500907399€14.49
Carson 1:14 SMD LED roof light boards Art. 500907399 bring authentic lighting accents to your 1:14 scale model. The set contains two 12-volt circuit boards, each with a white SMD LED and integrated series resistor. Compact Ø 8 mm circuit boards with 200 mm connection cable, suitable for roof and front lamp brackets and ideal for upgrading details or as a spare part.
Basic accessories
1:14 3+1-section (2) Trailer Taillight
500907261€15.99
Carson 1:14 3+1-chamber tail lights (item no. 500907261) are universally applicable, true-to-scale tail lights in 1:14 format, supplied as a set of 2 for universal trailers. They offer model builders a practical solution for enhancing the appearance of trailers and achieving authentic attention to detail.
Electronics
1:14 7,2-14V Trailer side-marker oran.
500907382€34.99
The Carson 500907382 1:14 marker light orange (7.2-12V) offers model builders compact, reliable side markers for trailers. Made of plastic with glued-in SMD LED, dimensions 8×4×1.2 mm and collar Ø3.2×2 mm, cable length approx. 200 mm. In the set: 2 lights and 2 resistors - ideal for detailed retrofitting.
Electronics
1:14 7,2/12V Angle Eyes blue Hella bl(2)
500907571€52.99
Carson 1:14 7.2/12V Angle Eyes Hella (item no. 500907571) provide authentic lighting for your model: black auxiliary headlights with Angel Eyes and two light functions; parking light ring blue, high beam white. 5 mm mounting. Two sets are supplied with housings, blue and clear lenses, reflectors, circuit boards, diode, mounting material and instructions. Licensed Hella quality for detail-loving model builders.
Electronics
1:14 7,2/12V Angle Eyes blue SMD LED PCB
500907554€34.49
Carson 500907554 1:14 Angel Eyes blue SMD LED board brings show lighting to the model and appeals to model building enthusiasts. The circuit board for 7.2 and 12 V offers two light functions: blue parking light ring and white high beam. Fits roof light brackets and auxiliary headlights. Included in delivery: 2 circuit boards (200 mm cable), 2 reflectors, diode for 12 V and instructions.
Electronics
1:14 7,2/12V Angle Eyes white Hella bl(2
500907573€52.99
The Carson 500907573, 1:14 7.2/12V Angle Eyes White from Hella, offers authentic additional lighting for your model. Two light functions with white parking light ring and high beam, suitable for 7.2 and 12 V, 5 mm mounting bracket. Two sets each with two black housings, blue and clear lenses, reflectors, circuit boards, diode, mounting material and instructions.
Electronics
1:14 7,2/12V Angle Eyes white Hella ch(2
500907574€52.99
Carson 500907574 - 1:14 7.2/12V Angle Eyes in chrome combines original Hella design with two light functions: white parking light ring and white high beam, ideal for authentic retrofitting and show look on the model. Complete set with two sets (2 housings each, blue and clear lenses, reflectors, circuit boards, 1 diode), mounting material, instructions and 5 mm mounting point; licensed by Hella.
RC truck accessories
1:14 7,2/12V Day Run. Light Actros 2/3A
500907677€65.99
Carson daytime running light MB Actros 2/3A (500907677) in 1:14 scale gives your model truck authentic daytime running light and appeals to demanding model makers. It operates at 7.2-12 V DC and matches the electrical system of corresponding 1:14 vehicles. A must for detailed retrofits. Important note: not compatible with TAMIYA MFC-01/03.
Electronics
1:14 7,2/12V LED Front-Winker VolvoFH16
500907506€65.99
The LED front turn signal set 500907506 for Volvo FH16 on a scale of 1:14 is aimed at ambitious model builders with Tamiya vehicles. Operating voltage 7.2-12 V DC. The scope of delivery includes a set of indicators, mounting material and instructions. Note: not compatible with the TAMIYA MFC. Warning! Not suitable for children under 14 years.
Electronics
1:14 7,2/12V LED-PCB Taillight Arocs Tip
500907616€40.99
The Carson 500907616, 1:14 Arocs tipper tail light circuit board, is the LED PCB for true-to-original Arocs tippers in 1:14 scale and is supplied as a twin pack. The PCB operates at 7.2-12 V and offers indicators, driving lights, brake lights and reversing lights - perfect for detail-loving model builders who want realistic lighting functions.
Electronics
1:14 7,2/12V MB Side-marker LED Set (2)
500907560€17.99
Carson 500907560 - 1:14 7.2/12V MB marker light set for model builders: Four LEDs (2 white roof lights, 2 orange side marker lights) with ~300 mm cable each, instructions included. Specially designed for TAMIYA MB Actros; not compatible with TAMIYA MFC. Ideal for realistic lighting and detail optimization on the 1:14 scale model.
RC truck accessories
1:14 7,2/12V Pos.-lamp 21LED Scania 770S
500907676€85.99
Position light set Scania 770S (500907676) from Carson on a scale of 1:14 offers 21 LEDs at 7.2/12V and realistic light functions. Roof high beam and five roof lights on the light bar, additional bumper and radiator lights, indicators on the mudguards and side position lights provide an authentic presence. Not compatible with TAMIYA MFC-01/03.
RC truck accessories
1:14 7,2/12V Taillight PCB Scania 770S
500907675€124.99
The faithfully reproduced 1:14 Carson Scania 770S (500907675) tail light circuit board brings segmented tail lights with fine glass inserts to your model and works with an input voltage of 7.2-12 V DC. Specifically designed to fit TAMIYA Scania 770 S, not compatible with TAMIYA MFC-01/03, it is the perfect solution for detail-oriented modelers looking for authentic lighting and precise retrofitting.
Electronics
1:14 7,2/14V Volvo Headlight
500907507€109.99
Carson 500907507 - 1:14 Volvo FH16 headlight circuit board (7.2-12 V) provides model builders with the striking V daytime running lights as well as indicators, parking lights, low beam and high beam. When switched off, the V-light shines at 100% and dims to 25% when dipped. Set left/right with housings, mounting material and colored wires (~250 mm). Not compatible with TAMIYA MFC-01/MFC-03; suitable for TAMIYA 300056360.
Electronics
1:14 7,2V LED-PCB 6-Section taillight
500907385€57.99
The 1:14 7.2V 6-chamber LED board Carson 500907385 provides five light functions as a pair (left + right) with SMD LEDs and a common positive pole: Blinker, brake light, driving light + position light, reversing light and fog light. Cable length approx. 500 mm; suitable for item no. 500907038. Rear light not included. Not compatible with TAMIYA MFC.
Electronics
1:14 7,2V LED-PCB Arocs Headlight
500907596€70.99
500907596 - 1:14 7.2V Arocs LED headlight board brings six realistic light functions for model building enthusiasts: indicators, side marker light with blinker effect, parking light, driving light, high beam and fog light. Suitable for TAMIYA MB Arocs. One set (left/right) with colored wires ~200 mm, mounting material and instructions; not compatible with TAMIYA MFC.
Electronics
1:14 7,2V LED-PCB MAN Headlight
500907391€70.99
The Carson 1:14 7.2V MAN LED headlight circuit board (500907391) brings realistic lighting to the model: A set with one right and left circuit board each provides indicators, parking lights, fog lights, high beam, driving lights and cornering lights at 7.2 V. Perfectly matched to the TAMIYA MAN TGX; not compatible with the TAMIYA MFC.
Electronics
1:14 7,2V LED-PCB MAN Taillight
500907389€35.99
The Carson 1:14 MAN LED tail light circuit board (500907389) with 7.2 V and 250 mm cable length provides realistic lighting for your model: four functions - indicators, brake light, tail light and reversing light - ensure authentic effects. One set contains one right and one left circuit board; suitable for TAMIYA MAN TGX. Not compatible with TAMIYA MFC.
Electronics
1:14 7,2V LED-PCB MB Headlight
500907558€70.99
The 500907558 - 1:14 7.2V MB LED headlight board for Carson offers six light functions: front turn signal, side marker light with turn signal effect (the turn signal lights up brighter than the marker light), parking light, driving light, high beam and fog light. Colored wires approx. 200 mm, set left/right with mounting and instructions. Suitable for TAMIYA MB Actros, not compatible with TAMIYA MFC.
Electronics
1:14 7,2V LED-PCB MB Taillight
500907556€35.99
The Carson 500907556 - 1:14 7.2V MB LED tail light board enhances TAMIYA MB Actros models. The set with one left and one right circuit board, approx. 500 mm colored wires and instructions offers four functions: Blinker, driving light, brake light and reversing light for realistic lighting. Not compatible with TAMIYA MFC.
Electronics
1:14 7,2V SMD-LED white (2)
500907396€9.99
Carson 1:14 SMD LED 7.2V white (2) (500907396) provides model building enthusiasts with brilliant, realistic lighting for 1:14 models and enables precise retrofitting. The tiny SMD chips (1.4×1.4 mm) are equipped with approx. 250 mm cables, 220 Ω resistors and instructions. Two LEDs with cables and two resistors offer universal, easy-to-install replacements for detailed conversions.
Basic accessories
1:14 Air Horn-Set long/short chr.brass
500907096€29.49
The 1:14 truck fanfare set 500907096 from Carson combines a long and a short fanfare made of nickel-plated brass and appeals to model builders who value fine features. The set contains all the necessary mounting parts as well as a drilling template for precise, clean installation on the model.
Basic accessories
1:14 Air-suspen. bellow soft (2) 20x18mm
500907357€6.99
The 1:14 soft air suspension bellows 20×18 mm (500907357) from Carson provide gentle damping for model builders who love detail. Made from injection-molded rubber, the bellows measure 20 mm in diameter and 18 mm in height; two pieces are supplied. Ideal for lightweight models up to 5 kg, easy to fit and durable.
Basic accessories
1:14 Alloy Front Knuckel Arms (2)
500530913€37.99
Carson 1:14 front axle aluminum wheel axles, item 500530913 (2 pieces), are high-quality 1:14 scale aluminum front axle components. Designed as an original replacement or upgrade for your 1:14 scale models, they offer precise geometry and an accurate fit for exact wheel alignment - ideal for model building enthusiasts.
Basic accessories
1:14 Alu stow case f. wood plank GH TU4
500907449€55.99
500907449 - 1:14 aluminum storage compartment with wooden planks for the Goldhofer TU4 low-loader combines a true-to-scale look with sophisticated functionality for model builders who love detail. The aluminum storage compartment is suitable for the low loader (500907400); the wooden planks can be attached on the outside to accommodate extra-wide vehicles. The storage compartment and wooden planks are supplied. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Alum. 2-Speed shift gearbox Compact
500907265€199.99
500907265 - 1:14 aluminum 2-speed gearbox Compact from Carson is a compact, CNC-milled aluminum gearbox (without motor) for TAMIYA 1:14 2- and 3-axle chassis. Hardened steel gears, five-fold ball bearings, 5 mm output shaft, gear ratios 1:11.3 and 1:5.666 as well as aluminum motor mounts for 540 motors ensure robust performance; shifting via micro servo, shift servo and motor not included.
Basic accessories
1:14 Alum. 2-Speed Transfer-gearbox
500907266€249.99
500907266: The 1:14 aluminum 2-speed transfer case from Carson turns TAMIYA 2- and 3-axle models into real all-wheel drive models. CNC housing, hardened steel gears, 7x ball bearings, 5 mm output shaft and self-locking longitudinal differential ensure traction. Two gears, micro servo, simple assembly. Note: Remove battery holder, 7.2 V drive battery in the cab.
Basic accessories
1:14 Alum. 2/3Axle Mainplate/Batt.Hold.
500907593€69.99
Carson 500907593 - 1:14 aluminum base plate for 2/3 axles with integrated battery holder, developed for demanding model builders. It replaces the standard battery holder and relocates the battery into the driver's cab, which remains tiltable after the conversion. Suitable for all Tamiya 2/3-axle Euro tractor units (except Mercedes-Benz Arocs 300056352). The bracket 500907584 is required to mount the tanks.
Basic accessories
1:14 Alum. Arocs Cab locking device
500907590€37.49
1:14 scale aluminum cab lock MB Arocs (500907590) from Carson combines a detailed look with a robust aluminum design and reliably replaces the split pin of the TAMIYA Mercedes-Benz Arocs cab. This scale replacement part increases the authenticity and functionality of your model and is aimed at demanding RC model builders.
Basic accessories
1:14 Alum. Arocs Mainplate/Batt.Hold.
500907591€69.99
The Carson 500907591 1:14 aluminum Arocs base plate with battery holder enhances your model emotionally and offers clear technical advantages. Suitable only for Mercedes-Benz Arocs 300056352, it replaces the kit holder and relocates the battery into the cab, which remains tiltable after the conversion. The 500907584 holder is required for tanks.
Basic accessories
1:14 Alum. Cylinder mount GH (2)
500907476€46.99
Carson 1:14 scale aluminum cylinder brackets 500907476 (GH 907060) are reinforced aluminum brackets that replace the standard plastic brackets in the kit. Tailor-made for precise mounting in 1:14 scale, they provide increased stability and durability. Two brackets are supplied for easy retrofitting. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Alum. Driver Cab locking device
500907156€38.99
1:14 aluminum cab lock (500907156) is the true-to-original, aluminum solution for the detailed locking of TAMIYA trucks in 1:14 scale. The robust unit replaces the split pin, is supplied with bracket and small parts and can be mounted on European, tiltable tractors via existing frame holes. Not suitable for MB Arocs (300056352).
Tyres & rims
1:14 Alum. Fr. wide wheel (2)driv. axle
500907278€74.99
500907278 1:14 aluminum rims set wide for driven front axle combines 10-hole Euro design with 12 mm hexagon. Dimensions 49×28 mm, approx. 65 g per rim. Included in delivery: 2 rims, 20 decorative screws, 2 hub caps and fitting instructions. Fits the driven front axle 500907267; compatible with TAMIYA 300056528/309808176 and CARSON 500907012/500907612; socket wrench 500907595 recommended.
Tyres & rims
1:14 Alum. Fr. wide wheel Longh. (2) Hex
500907412€74.99
Carson 1:14 aluminum rim long hole wide (500907412) combines an elegant finish with robust precision for demanding model builders. The wide aluminum rim has a 12 mm hexagon socket and is designed for the driven front axle 500907267. The set includes two rims, two hub covers, 20 chrome nuts, 20 stud bolts and instructions.
Basic accessories
1:14 Alum. Frame Tamiya 2x1m (undrilled)
500907063€24.49
The 1:14 Tamiya aluminum frame profile 2×1 m (500907063) is an undrilled, two-piece set made of drawn, bright aluminum with rounded edges - ideal for precise chassis conversions in 1:14 scale. Height 21 mm, width 7 mm, material thickness 1.5 mm, length 1 m each. Robust, precise fit and flexible use for demanding model builders.
Tyres & rims
1:14 Alum. Front wheel wide/round h. (2)
500907159€75.99
500907159 1:14 aluminum front wheel rim wide in round hole design from Carson combines an authentic look with robust aluminum quality for model building enthusiasts. The set includes two rims and two hub caps that cover the fixing stop nut. Mounting for two ball bearings 5×11×4 mm; can also be used as a trailer rim with wheel bolt set 500907158.
Basic accessories
1:14 Alum. Fuel Tank mount (2)
500907584€18.99
Carson 500907584 - 1:14 tank holder set (2) for MB Arocs combines precise function with robust design: Two aluminum holders (left/right) including all mounting material enable the secure attachment of tanks and exhaust system to the frame. Note for TAMIYA models: The battery holder must be removed when using the 2-speed transfer case.
Tyres & rims
1:14 Alum. Low Loader Twin-Wheel Set (2)
500907136€50.99
The 1:14 aluminum twin wheels 500907136 from Carson are a twin-wheel set (2) made of aluminum for 1:14 scale models. Suitable for the Goldhofer 500907060 low-loader, they offer a true-to-scale addition or replacement solution for your low-loader and appeal specifically to model making enthusiasts. Ideal for repairs and completing details.
Tyres & rims
1:14 Alum. Rear wheel long hole (2) hex
500907352€114.99
Carson 500907352 - 1:14 aluminum wheel set rear axle slotted hole (2) combines precision and appearance for demanding model builders. Includes: two double rims, aluminum hubs with 12 mm hexagon socket, two hub covers, 20 chrome nuts, 20 stud bolts and instructions. Assembly aid: socket wrench 500907595. Suitable for Tamiya 300056527/309805456 and Carson 500907014/500907011.
Basic accessories
1:14 Alum. Trailer bumper rear
500907361€24.99
The Carson 1:14 aluminum bumper for semi-trailers (item no. 500907361) is a milled aluminum Euro semi-trailer bumper that gives your model an authentic look and precise fit. Designed for a frame width of 96 mm, it can be combined with the 7-chamber rear lights (500907037) and the license plate holder (500907034). Scope of delivery: 1 piece.
Basic accessories
1:14 Alum. Trailer Coupling SAF (MFC)
500907155€99.99
500907155 1:14 aluminum fifth wheel SAF (MFC) from Carson gives your Tamiya truck extra detail: officially licensed by SAF Holland, made of aluminum, fits as a 1:1 replacement on all TAMIYA trucks in 1:14 scale. Easy assembly, prepared for MFC-01/MFC-03 microswitch for coupling sound; incl. subframe, sliding pad, spring and small parts.
Basic accessories
1:14 Alum. Trailer support legs (2) 73mm
500907375€40.99
The 500907375 1:14 aluminum trailer supports (set, 2 pieces, 73 mm) offer model builders robust, precise supports for detailed trailers. Housing (15×15×73 mm) made of aluminum with two M3 fastening holes, steel plunger (Ø8×62 mm) with clamping screw and aluminum base (Ø19×3.5 mm). Retracted 76.5 mm, extended 114 mm.
Tyres & rims
1:14 Alum. Trailer Wheel (2) long hole
500907350€63.99
500907350 - 1:14 aluminum trailer rims in slotted hole design for detail-loving model builders: two wide turned aluminum rims with decorative screws, plastic cover caps and two ball bearing seats each (5x11x4 mm). Suitable for all Carson trailers. Scope of delivery: 2 rims, 2 covers, 20 chrome nuts, 20 stud bolts, instructions. We recommend socket wrenches 500907595 for assembly.
Basic accessories
1:14 Alum. Underrun protection Trac.
500907181€34.49
500907181 - 1:14 scale aluminum underride guard construction site for 2-/3-axle trucks: Solid aluminum guard protects the rear lights and mudguards of the tractor unit during tough off-road use. The bracket is attached to the rear cross member with four screws, the three-part cover is screwed together; paintable and suitable for all TAMIYA 2- and 3-axle EU tractor units, supplied with two aluminum brackets and three-part protection.
Basic accessories
1:14 Alum. Warning sign w/decal
500907448€29.99
Carson 500907448 - 1:14 aluminum warning signs with decoration offer detail-loving model builders high-quality aluminum signs for low loaders and trailers. The set contains two aluminum plates with integrated holder, warning decal and fastening screws, impresses with its robust material and simple installation for precise retrofitting.
Tyres & rims
1:14 Alum. Wheels f. Carson Trailer (2)
500907040€67.99
500907040 1:14 aluminum rims for CARSON trailers give your model a real motorsport look and robust running smoothness. The wide rims (Ø49 mm, width 27.5 mm) are designed for two 5x11x4 ball bearings and are supplied as a set of two with 20 decorative screws, 2 wheel hub caps and assembly instructions. Suitable for trailer axle with air suspension dummies 500907069 as well as for wide Tamiya and CARSON tires.
Basic accessories
1:14 Alum./Steel Univer.Drive Shaft Set
500907004€33.99
500907004 1:14 aluminum/steel universal drive shaft kit - robust drive shaft solution for model builders who demand performance and precision. The 112 mm long shaft can be cut to length and used flexibly; two drive bones and two drivers are supplied, ideal for individual adjustments and long-lasting use.
Basic accessories
1:14 Auxiliary head lamp (2)
500907052€15.79
1:14 auxiliary headlights 500907052 - Two precision-manufactured headlights for mounting on a 5 mm lamp bracket, supplied with a total of two blue and two white lenses (transparent and blue glass inserts). For 1:14 scale model builders, they offer a detailed look and easy mounting on the lamp bracket.
RC truck accessories
1:14 Chrome Bumper MB 1838/1850 Chrome
500013511€12.49
1:14 MB 1838/1850 chrome bull bar (500013511) gives your model an authentic, shiny finish. Made from chrome-plated plastic, the high-quality detail in 1:14 scale offers a true-to-original look and is a perfect fit for the Mercedes-Benz tractor units from TAMIYA (56305 and 56307). A must for discerning model builders.
Basic accessories
1:14 Control platform Dump trailer
500907365€63.99
500907365 1:14 Dump truck control stand set from Carson is a precise 1:14 scale accessory for model builders. The kit made of milled hard PVC plate (gray) contains parts to be cut out, sanded, glued and painted. Dimensions W153 × H135 × D≈70 mm, suitable for frame width 96 mm. Complete set with fixing material and assembly instructions.
RC truck accessories
1:14 Draw Tube extens. Pole Trailer
500907733€89.99
Carson 500907733 - 1:14 Draw Tube extens. Pole Trailer is an original replacement and upgrade part for 1:14 scale trailers, providing model building enthusiasts with a true-to-scale, function-oriented component to supplement or modify their vehicles, ideal for detailed conversions, dioramas and sophisticated collections.
Basic accessories
1:14 Driven Front axle w/Auto-Diff.-Lock
500907267€234.99
The Carson 500907267 1:14 driven front axle with Auto-Diff-Lock transforms Tamiya tractors into all-wheel drive models and locks automatically in the event of loss of traction without additional shift servos. Reinforced plastic housing, CNC aluminum steering knuckle, hardened steel bevel gears, 16-way ball joint, 1:2.66 gear ratio, 44×160×33 mm, ~175 g. Installation kit 500907280 required.
Basic accessories
1:14 Driver Figure "John"
500907426€24.99
500907426 - 1:14 scale driver figure "John" from Carson is a pre-painted truck figure that can be placed in any sitting or driving position thanks to its movable limbs and can sit in the driver's seat or as a passenger. Supplied true to scale for 1:14 models, John is ready for immediate use. Other figures: 500907427, 500907186. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Driver Figure "Susi"
500907427€24.99
The 1:14 scale driver figure "Susi" (500907427) from Carson brings vivid details to your truck models and is already painted. With movable limbs, she can be placed in any driving position or sat on the passenger seat so that she is ready for immediate use. Ideal for local and long-distance transport dioramas; other 1:14 scale figures: John (500907426), Robert (500907186).
Basic accessories
1:14 Euro-Pallet-Set (4) Plastic
500907094€8.99
Carson 1:14 plastic Euro pallets (500907094) in a set of 4 combine a detailed look with practical size. Each 1:14 scale pallet measures 93 × 62 × 14 mm; the visually outstanding plastic parts provide reliable accessories for demanding model builders and add lasting value to your scenes.
Basic accessories
1:14 Euro-Pallet-Set (5) Plastic/Beige
500907049€7.79
The 1:14 plastic Euro pallet set 500907049 in beige comprises five finely detailed pallets and is aimed at model builders looking for authentic loading equipment in 1:14 scale. The pallets match TAMIYA trucks, CARSON trailers and other model trucks in this scale, can be seamlessly integrated and visually enhance any loading area.
Basic accessories
1:14 Fahrerfigur "Robert"
500907186€9.99
Carson 500907186 - the 1:14 scale driver figure "Robert" is a ready-to-use, pre-painted and immobile detail figure, ideal as a driver or co-driver in truck models. True-to-scale proportions and high-quality paintwork bring authenticity to the cockpit, ensure a realistic look and uncomplicated installation.
Electronics
1:14 Flashing Light Set (2) LED 13 Prog.
500907214€119.99
The Carson rotating beacon set 500907214 on a scale of 1:14 provides realistic signals: two ready-to-install rotating beacons, each with seven super-bright SMD LEDs, 13 programs (6 rotation modes, 7 strobe modes) and memory function for two settings. Control via 3-pos switching channel, swivel ±5°, operation 4.5-6.0 V; incl. mounting material, set of lenses, instructions; licensed by HELLA.
Electronics
1:14 Flashing Light Set (2) MB Arocs
500907604€119.99
The 1:14 MB Arocs rotating beacon set, item 500907604, provides realistic light signals for model makers: Two HELLA-licensed lights (height 22 mm, aluminum base Ø17 mm, glass Ø11 mm) with approx. 350 mm 3-pin cable and uni-plug. 13 programs (6 all-round/7 strobe) at original speed, memory for 2 settings, operation 4.5-6.0 V, control via 3-pos. plug.
Basic accessories
1:14 Frame cover MB Arocs/Actros 3A
500907598€63.99
The 1:14 MB Arocs/Actros 3A frame cover (Carson 500907598) is a targeted solution for model builders: designed for TAMIYA 3-axle Mercedes-Benz Actros and Arocs, it enables detailed retrofitting or repair in 1:14 scale. A high-quality spare part for authentic bodywork on the model.
Basic accessories
1:14 Frame Cover Panels 3-Axle
500907255€92.99
Carson 1:14 3-axle frame cover (500907255) is a perfectly fitting addition for TAMIYA 3-axle Euro trucks from MAN and SCANIA. The detailed covers maintain the 1:14 scale, enhance the appearance of your model and are ideal as spare parts or for sophisticated tuning in model making.
Tyres & rims
1:14 Fulda Crossforce Off-Road Tires (2)
500907011€26.49
Carson 1:14 Fulda Crossforce off-road tires - item 500907011 (2 pieces) deliver superior off-road performance for your 1:14 model as heavy-duty high-performance tires. The flexible hollow-chamber design ensures optimum traction; suitable for original Tamiya rims. Dimensions: Ø83 mm, width 21 mm, inner diameter 44 mm. Tire insert 15 mm (500907516) separate.
Tyres & rims
1:14 Fulda Multitonn 2 Tire wide (2)
500907012€26.49
500907012: 1:14 Fulda Multitonn 2 wide tires (2) offer flexible high-performance hollow-chamber tires for optimum traction and long service life on a 1:14 model scale. With Ø83 mm, width 27 mm and inner diameter 44 mm, they provide robust grip; content 2 pieces. Compatible with front axle rim 500907013, trailer rim 500907026; matching tire inserts 500907517.
Tyres & rims
1:14 Fulda Variotonn Off-Road Tires (2)
500907612€26.99
The Carson 500907612 1:14 Fulda Variotonn off-road tires (2) are heavy-duty high-performance tires for predominantly off-road use and therefore the first choice for demanding model builders. The hollow-chamber design provides optimum traction; dimensions ø81×29 mm, inner diameter 44 mm. Suitable for original Tamiya rims. Tire insert 20 mm (500907517) compatible. Suitable rear tire: 500907011.
Basic accessories
1:14 King Pin Steel fit. Tamiya
500907362€7.99
Carson 1:14 kingpin 500907362 made of oxidized steel for Tamiya is aimed at model building enthusiasts who demand precise, durable spare parts. With enclosed fixing screw and compatible with all Tamiya trucks, the dimensions Ø11 mm, collar Ø6.5 mm, height 10 mm guarantee reliable fitting accuracy and robust axle function.
Electronics
1:14 LED Flashing Light (1) oran. Swiv.
500907580€58.99
The Carson 500907580 1:14 SMD rotating beacon in orange brings a professional look to the model roof. It offers 7 orange SMD LEDs, 13 selectable programs (6 all-round, 7 flash functions) at 4.5-13.5 V and can be swiveled ±5° for roof mounting. Aluminum housing, four interchangeable lenses, total height approx. 22 mm, cable 250 mm. Incl. mounting and instructions. Licensed by Hella.
Electronics
1:14 LED Flashing Light (1) oran. Uprig.
500907579€53.99
Carson 500907579 - 1:14 SMD rotating beacon in orange for vertical mounting brings a realistic flashing effect to the model. Hella-licensed, with 7 orange SMD LEDs, 13 selectable programs (6 rotating, 7 flashing), aluminum housing and four interchangeable lenses. Height approx. 28mm, Ø12mm, cable 250mm. Scope of delivery: light, 4 lenses, mounting and instructions.
Basic accessories
1:14 Lifted-Suspension Kit +8mm 2A.T.T
500907452€34.99
500907452 1:14 Lifted-Suspension Kit +8mm 2A.T.T immediately gives your model more presence and off-road capability: The vehicle ground clearance of 2-axle Euro tractors increases by 8 mm. The set matches the axles included in the kit and the Carson drive concept with self-locking axles, is easy to install and is supplied as a set. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Lifted-Suspension Kit +8mm 3A.T.T
500907618€42.99
500907618 - 1:14 Carson +8mm (3A.T.T) height adjustment set gives your model noticeably more terrain variability: Compatible with TAMIYA rear tippers and all 3-axle Euro tractors, it increases the ground clearance by 8 mm. Compatible with the axles included in the kit and the Carson drive concept with self-locking axles, for demanding model builders.
Electronics
1:14 Light case clear (2) universal
500907256€26.49
Carson 1:14 clear light housings (500907256) provide model builders with two universal clear glass housings, each with an LED board (operating voltage 7.2V=). With dimensions of 12×7×5 mm, they fit 1:14 models true to scale and are ideal as additional lights, for example for SCANIA radiator grilles; 2 housings and 2 circuit boards are included in the scope of delivery.
Basic accessories
1:14 Low Loader Axle Goldhofer/SAF
500907140€76.99
The 1:14 Goldhofer low-loader axle (500907140) with air suspension dummies is a ready-to-install solution for the Goldhofer BAU STN-L3 low-loader semi-trailer (suitable for 500907060) or your own construction. Glass fiber reinforced plastic parts, aluminum axle and steel wheel bolts offer high robustness. Track width 190 mm, axle Ø 5 mm, frame width 76 mm. Kit with mounting parts and instructions.
Tyres & rims
1:14 Lowloader Tire-set (4)
500907583€26.49
Carson 1:14 low-loader tires Fulda Ecotonn (item no. 500907583) offer an authentic profile and precise fit for your Goldhofer® model or self-build in a set of four. With outer Ø 58 mm, inner Ø 28 mm and 15 mm width, they fit Goldhofer Bau STN-L3 (500907060), TU-4 and the tire/rim set 500907141; ideal with aluminum double rim 500907136. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 MAN TGX XLX Fro.Bumper Light Holder
500907124€46.99
Carson 500907124 - 1:14 bumper lamp bracket for MAN TGX XLX combines a classy look with robust function. As a front bracket on the Tamiya MAN TGX or as a rear wall bracket for two work lights (for Tamiya trucks), the set includes a nickel-plated brass bracket, two chrome headlights with clear and blue lenses, mounting parts, instructions and a self-adhesive drilling template; can be illuminated with bulbs or LEDs.
Basic accessories
1:14 MAN TGX XLX Top Light Holder
500907095€89.99
500907095 - the 1:14 scale roof lamp bracket for the MAN TGX XLX enhances your TAMIYA truck with an individual look. Made of brass, nickel-plated and highly polished, the long version is a real gem for the cab. The headlights are mounted individually and can be illuminated, ideal for detail-loving model builders.
Basic accessories
1:14 MB Actros Gigasp. Top Light Holder
500907134€96.99
1:14 MB Actros Gigaspace (500907134) roof light bracket enhances your Tamiya Actros: bent solid brass, hard chrome-plated with chrome-plated headlights. Includes bracket, four sets of headlights, two lenses (clear/clear-blue), mounting accessories and instructions. Dimensions 100×130 mm, expandable to six lights; compatible with 300056335,300056342,300056348,300056354; matching LED boards available.
Basic accessories
1:14 MB Arcos Top Light Holder
500907599€71.99
1:14 MB Arocs roof lamp bracket 500907599: This precisely fitting plastic roof rack enhances the cab of the TAMIYA Mercedes-Benz Arocs and gives it a realistic look. The scope of delivery includes a roof bracket, four headlight housings and mounting material; four rear work lights can be retrofitted as an option (500907144 for 7.2V or 500907578 for 12V), ideal for model builders. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Mounting Set Front Drive Axle
500907280€75.99
1:14 installation set for driven front axle (500907280) from Carson provides model builders with all the parts for clean installation on TAMIYA frames: two stainless steel leaf spring packs, mounting material, steel servo holder and steering linkage. Precisely manufactured for stable steering and resilient driving characteristics in 1:14 scale.
Basic accessories
1:14 Mud Guard-Set Dump trai.(quart.)(4)
500907068€21.49
The 500907068 mudguard set from Carson for 1:14 scale bodies is a set of four quarter mudguards, four brackets and mounting material and also fits 1:16 trailers. With dimensions of 76 x 35 mm and a bracket length of 39 mm, the set fits in perfectly and enables a clean look and easy mounting on trailers. Ideal for model builders looking for details true to the original.
Basic accessories
1:14 Pallet with Ceresit CM90 Easy
500907617€21.99
The Carson 500907617 1:14 Euro pallet with Ceresit CM90 Easy presents itself as a detailed building material load for demanding model builders. Licensed stamping, the shrink-wrapped Ceresit CM 90 EasyFlex PLUS and the compact dimensions 83×55×85 mm at 185 g make it a high-quality diorama and replacement load (1 piece).
Basic accessories
1:14 Pallet with Wuerth-Packings
500907620€23.99
1:14 Euro pallet with WÜRTH equipment (500907620) is an original licensed load in 1:14 scale for model builders with a love of detail. The WÜRTH packaging is shrink-wrapped, pallet and load bear licensed stamps. Dimensions 83×55×85 mm, weight 185 g; scope of delivery: 1 piece. Ideal for realistic loading of models.
Basic accessories
1:14 Plast. parts Trailersus. w/8mm lift
500907644€29.99
The Carson 500907644 1:14 plastic parts for trailer axles with 8 mm lift are a carefully designed retrofit set for model builders with the existing air suspension dummy axle 500907069. The set contains all the necessary plastic parts and two air bellows; metal parts and mounting material from the existing axle are reused, one set is required per trailer axle.
Basic accessories
1:14 Rear Axle w/ Diff.-Lock&fixed drive
500907268€199.99
The 1:14 rear axle 500907268 from Carson transforms TAMIYA 2/3-axle cars into powerful all-wheel drive vehicles: self-locking differential that automatically provides traction without the need for a shift servo or Bowden cables. Scope of delivery: pre-assembled diff, both drive shafts and housing cover. Reinforced plastic housing, 12 ball bearings, ratio 1:2.66. Intermediate shaft 500907169 is required for two axles in 3-axle vehicles.
Basic accessories
1:14 Rear Bumper (Euro) TAM-Semi-Trailer
500907074€79.99
Carson Euro bumper 1:14 for TAMIYA semi-trailers (material number 500907074) is milled from solid aluminum and quickly replaces the original bumper. Includes underride guard, 7-chamber rear lights, two bumpers and license plate holder. Fits TAMIYA 300056302/300056306/300056310; retrofit lighting: 500907071 or 500907387/500907388. A must for scale purists.
Basic accessories
1:14 Rear Bumper (Euro)T-Reefer Semi-Tr.
500907075€89.99
Carson 500907075 1:14 Euro rear bumper for Tamiya trailers 300056319, milled from solid aluminum, quickly replaces the original bumper. 7-chamber rear lights can be connected; lighting kit 500907071 required for Tamiya multifunctional unit (or circuit boards 500907387 for 7.2V / 500907388 for 12V). Scope of delivery: aluminum bumper with underride guard, 7-chamber rear lights, 2 buffers, license plate holder.
Basic accessories
1:14 Reduction Gear Unit 4:1
500013517€48.99
500013517 - 1:14 reduction gear set 4:1 provides model building enthusiasts with noticeably more torque for their Tamiya tractors. Lightweight plastic housing with ball-bearing metal gears ensures long-lasting, smooth running. The 4:1 reduction ratio optimizes power transmission; fits all Tamiya tractors except Globe Liner 56304 and requires a suitable universal joint.
Basic accessories
1:14 SAF Coupler plate (reinfor.plastic)
500907378€46.99
Carson 1:14 SAF plastic saddle plate (500907378) is the replacement plate for 1:14 scale models. Designed as an SAF saddle plate, it offers the right solution for replacement or retrofitting. Model building enthusiasts appreciate the authentic option for detailed construction and repair tasks.
Basic accessories
1:14 Scania R470/R620 Bumper Light Hold.
500907065€82.99
Carson 1:14 lamp bracket bumper Scania R470/R620 (500907065) is a highly polished, nickel-plated brass bracket that gives your 1:14 Scania a realistic chrome shine. The molded headlights can be illuminated and provide an authentic look - the ideal choice for model builders who appreciate attention to detail and robustness.
Basic accessories
1:14 Scania R470/R620 Top Light Holder
500907064€82.99
The 1:14 Scania R470/R620 (500907064) roof lamp bracket from Carson adds brilliant accents to your 1:14 scale model: made of nickel-plated brass, highly polished, with molded-on, illuminated headlights. A precise, authentic detail for realistic truck displays and individual upgrades.
Basic accessories
1:14 Servo Mount 2-Speed Gearbox
500907287€32.49
Carson 1:14 servo mount 2-speed gearbox (500907287) offers model builders the precise mount and linkage for the Compact 2-speed gearbox (item no. 500907265) when installed in TAMIYA trucks with original cab base plate. Made of aluminum, it comes with shift linkages, mounting material and assembly instructions for a precise, durable retrofit.
Electronics
1:14 SMD LED Dachlampenplat. 7,2V (2)
500907184€14.49
Carson 1:14 SMD LED roof light board 500907184 (7.2 V, 2 pieces) gives your model precise, powerful lighting. The board-equipped SMD LEDs are specially designed for 1:14 scale and are compatible with roof light brackets, bumper brackets and auxiliary headlights - including 50907052, 500907064, 500907076, 500907065 and 500907124 - ideal for ambitious model builders.
Basic accessories
1:14 Speed-up spindl.dri. shaft f. 56545
500907611€40.99
500907611: Carson 1:14 tuning spindle shaft for 56545 is a precise tuning part for model builders that has been specially designed for 1:14 models. The spindle increases the lifting speed by approx. 25% and is suitable for 300056545 ACU-01. If you are looking for more speed and direct response when lifting, this is a reliable, targeted increase in performance.
Basic accessories
1:14 Sticker-Sheet Truck Caution-Signs
500907086€22.49
500907086 - 1:14 decal sheet truck warning symbols: This DIN A4 decal sheet on transparent backing film gives your 1:14/1:16 model trucks realistic details. The self-adhesive sheet contains numerous warning signs, freely designable license plates with letters and numbers, 16 country codes and other logos - ideal for TAMIYA tractors and trailers, perfect for the finishing touches.
Basic accessories
1:14 SW 3mm Socket Wrench Steel
500907595€8.69
Carson socket wrench 500907595 is a 1:14 SW 3mm tool made of steel that makes it easier for model building enthusiasts to precisely mount aluminum rims and trim and driver screw connections. With wrench size M3 and one piece included in the scope of delivery, it offers secure, precise fastening for your 1:14 scale models.
Basic accessories
1:14 TAM 3-Speed-Gear Hi-Torque Upgr.Kit
500907115€23.99
The 500907115 torque set for 1:14 truck transmissions offers model building enthusiasts noticeably more power: The smaller motor pinion increases the torque by around 20 %, while the top speed is reduced accordingly. The scope of delivery includes an 8-tooth motor pinion and the matching gearbox end plate, ideal for targeted performance upgrades.
Basic accessories
1:14 Tension belt dummy (10) Curtainside
500907143€11.29
Carson 500907143 1:14 Tensioning strap dummies for tarpaulin trailers (10) offer model builders precisely fitting spare parts. Plastic dummy tensioning straps, dimensions 37×8×3 mm; the two-part parts are pressed onto the trailer tarpaulin and then attached to the frame. Contains 10 dummies and 10 fastening washers; suitable for 500907235 Fliegl Megarunner tarpaulin.
Tyres & rims
1:14 Tire insert 15mm 907011/14
500907516€11.49
Carson 1:14 Tire Insert 500907516 is a 15 mm wide set of 2 medium-strength cellular rubber that keeps truck tires in shape and provides additional stability. For model building enthusiasts, it improves walking behavior and traction on the road and off-road depending on the load and fits TAMIYA tractors, trailers and narrow Carson tires 500907011/500907014.
Tyres & rims
1:14 Tire insert 20mm 907012/907612
500907517€11.79
Carson 1:14 tire insert 20 mm (500907517) made of medium-strength cellular rubber keeps truck tires in shape and provides additional stability. The two inserts (20 mm) improve flexing behavior and traction depending on the load and are suitable for TAMIYA tractors, trailers and Carson tires 500907012/500907612 and TAMIYA kit tires 300056528/309808176.
Tyres & rims
1:14 Tire/Wheel-Set LowLoad.Fulda/SAF(2)
500907141€47.99
500907141 1:14 low-loader tire/rim set (2) gives model construction low-loaders a realistic look and reliable function. Suitable as a replacement for Goldhofer® Bau STN-L3 low-loader semitrailer (500907060), Goldhofer® TU-4 or for self-builds. Tires: Ø 58/28 mm, width 15 mm. In the set: 2 double rims with SAF hub caps, 4 Fuld Multitonn tires, 4 ball bearings (5×11×4). Fits the aluminum double rim 500907136.
Basic accessories
1:14 Towing bar Low loader (1) Plastic
500907627€26.99
The drawbar 500907627 for 1:14 low loader TU4 is a one-piece part made of fiber-reinforced plastic (black) - ideal as a spare part or for DIY projects. Suitable for frame widths 50/72 mm, coupling bore 4.2 mm, mounting pin 3 mm, dimensions 130×77×24 mm. Compatible with Goldhofer TU4 (500907400) and towing jaw set 500907182.
Basic accessories
1:14 Towing bar Trailer (1) Plastic
500907626€26.99
The 1:14 drawbar for trailers (500907626) is a one-piece, fiber-reinforced plastic solution for self-builds or as a spare part suitable for the models 500907622 and 500907624. With checker plate application, mounting bolt 3 mm, coupling hole 4.2 mm, for frame widths 72/90 mm and dimensions 180×96×6.5 mm, it offers a precise fit; recommended drawbar set: 500907182.
Basic accessories
1:14 Tr./Trail. Taillights 3-sec.rou.(2)
500907039€19.49
Carson 500907039 1:14 3-chamber rear light (2 pieces) brings realistic lighting to the model: can be illuminated for tractors, trailers and semi-trailers on a scale of 1:14. Included in delivery are two round 3-chamber lights with aluminum housing and plastic lenses in red/yellow; outer Ø 11 mm, height 6 mm.
Basic accessories
1:14 Tractor Truck Taillights 6-sect.(2)
500907038€19.49
Carson 500907038 1:14 scale 6-chamber rear lights for towing vehicles combine detailed design with practical function: As a two-piece set (2 pieces) in 1:14 scale, the lights can be illuminated and are ideal for retrofitting or restoring your model towing vehicle. Precisely manufactured for an authentic look and realistic operation.
Basic accessories
1:14 Trailer door hinge 270°(6)CAR.
500907142€16.99
Carson 500907142 1:14 trailer door hinge 270° (6) provides model builders with six plastic hinges with brackets, 1 mm steel bolts and mounting screws. At 22×7×4 mm, they fit CARSON box and flatbed trailers (including 500907092 Ver.II), but not Fliegl Megarunner 500907235. Assembly: Screw on the holder, place the hinge on the bolts and fix with superglue.
Basic accessories
1:14 Trailer door locking set
500907356€37.99
Locking set for trailers/containers 500907356 on a scale of 1:14 is a precise plastic set for retrofitting or repairing trailer and container doors. For model builders with a love of detail, it offers precisely fitting locks that fit unobtrusively into the model and restore functionality and authenticity.
Basic accessories
1:14 Trailer Fog- & Backup Light (1+1)
500907077€18.99
Carson 1:14 semi-trailer fog & reversing light 500907077 is a compact double set for detail-loving model builders: A round side tail light and a round reversing light in 1:14 scale provide authentic rear optics. The set matches the round 3-chamber rear lights (item no. 907039) and rounds off detailed replicas.
Basic accessories
1:14 Trailer hitch with Pole RC/Mech.
500907182€59.99
500907182 - 1:14 Drawbar with drawbar RC/Mechanical is a compact, robust coupling for all CARSON trailers in 1:14 scale. The locking mechanism can be operated mechanically or by remote control; when used manually, a strong counter spring prevents unintentional opening. The set includes drawbar, drawbar and mounting material. Fits Tamiya MB Arocs and Volvo FH16.
Basic accessories
1:14 Trailer License Plate brack./buffer
500907034€13.49
The 500907034 Carson 1:14 trailer license plate holder with buffer is a high-quality detail part for model building enthusiasts. Two rubber buffers absorb shocks, the preparation for lighting allows realistic rear lights, mounting material is included. Fits vehicles and trailers on a scale of 1:14.5 and 1:16.
Basic accessories
1:14 Trailer Mud Guard (2) Plastic
500907137€28.99
500907137 - 1:14 half-round mudguards (2) made of plastic: elegant, robust spare parts for model makers and tuning fans, also perfect for DIY projects. Dimensions 96 × 35 × 48 mm with 40 mm hole spacing. In the set: 2 mudguards, 4 steel spacer sleeves, mounting kit and mounting instructions. Fitted as standard on trailers 500907312, 500907216, 500907235 and 500907425.
Basic accessories
1:14 Trailer Mud Guard Set straight (4)
500907036€22.49
Carson 1:14 trailer mudguard set 500907036 combines precision and scale accuracy for model builders: Four straight mudguards including brackets and mounting material form a complete set for detailed retrofitting or repair. Suitable for all 1:14 and 1:16 scale trailers and ideal for an authentic, robust look.
Basic accessories
1:14 Trailer Splash guard Set
500907183€30.99
500907183 1:14 splash guard set for CARSON trailers improves protection and visibility for following traffic and is ideal for retrofitting. All mounting components are included: the large splash guard is screwed to the bumper/rear underride guard, the two small mudguards are glued in the designated places with superglue. Suitable for trailers 500907030, 500907081, 500907082, 500907092 and Euro bumpers 500907074, 500907075 and 500907083.
Tyres & rims
1:14 Trailerwheel f. Tire wide Silver(2)
500907026€17.49
The trailer rim 500907026 for 1:14 scale models in silver is a plastic rim that can be used to convert Tamiya trailers to single tires. Specially designed for the CARSON wide tire "Fulda" (500907012), Ø 49 mm, width 27.5 mm. Delivery: 2 pieces. Ideal for detail-loving model builders for conversion or as a spare part; silver look complements common trailer details.
Basic accessories
1:14 Traktor Truck fire drencher (1)
500907123€8.99
Carson 500907123 - 1:14 truck fire extinguisher gives your truck the finishing touch and appeals to model builders who love detail. The 1:14 scale fire extinguisher can be universally mounted on models and trailers. It is supplied as a plastic kit including sticker and is intended for direct mounting on the model; height approx. 40.
Basic accessories
1:14 Truck Alum. Coupler Plate n. MFC
500530918€53.99
Carson 1:14 truck aluminum fifth wheel 500530918 is the aluminum fifth wheel plate for demanding model builders: Suitable for all 1:14 scale TAMIYA trucks, it replaces the plastic fifth wheel plate with manual operation included in the kit. As a stable retrofit solution, it offers precise replacement and a high-quality look - ideal for hobby and ambitious model builders alike.
Tyres & rims
1:14 Truck Front Wheel wide Chrome (2)
500907061€26.49
Carson 500907061 - 1:14 Truck front axle rim wide chrome (2) brings a striking shine and robust precision to your model. The chrome-plated plastic rims (Ø49 mm, width 27.5 mm) fit all Tamiya front axles and are designed for the Fulda wide tires (Art. 500907012). Scope of delivery: 2 pieces.
Tyres & rims
1:14 Truck Front Wheel wide gray (2) ABS
500907013€17.49
Carson 1:14 front axle rim wide gray (500907013) combines high-quality ABS processing with precise shape for a convincing look and robust function. The silver plastic rim (2 pieces) measures 49 mm in diameter with a width of 27.5 mm, fits all front axles of TAMIYA trucks and is designed for the Fulda wide tire 500907012.
Basic accessories
1:14 Truck Lighting Parts and Bulbs
500013512€8.79
500013512 - 1:14 truck additional light set specifically complements your scale models: The set for 1:14 trucks contains five additional lights and is suitable for all TAMIYA trucks. Specially designed for model builders, it provides authentic lighting accents and expands the equipment options for your 1:14 scale truck.
Basic accessories
1:14 Truck Mirror & Horn Set
500013513€8.79
Carson 1:14 Truck Horn and Mirror Set (500013513) is a well thought-out accessory package for dedicated model builders who want to give their 1:14 truck additional character and fine details. Suitable for all TAMIYA trucks, the set includes two horns and two exterior mirrors and opens up numerous options for customizing your model and adding striking accents.