Italeri tools
The right tool makes all the difference: Italeri provides a selection of modeling tools that ensure precision and ease during your builds. Great for advanced projects and delicate tasks.
Model tools
IT Plastic Modelling Beginner Tool-Set by Italeri
510050830€13.99
The IT Plastic Modelling Beginner Tool-Set from Italeri gathers 4 essential workshop tools into one focused starter set for plastic kit building. A brush, cutter, file and angled tweezer support the key hands-on steps that shape a cleaner build, from separating parts and refining edges to placing small components and handling detail work at the bench. The metal tweezer is suited to controlled pickup and placement where fingertips can block access to narrow contact points. The cutter helps remove parts during preparation, while the file works on edge cleanup and small surface corrections before joining sections. The brush adds a finer tool for detail painting and careful application on smaller areas. Together, these tools cover several of the routine actions that appear again and again during model assembly, making the set a practical entry point for builders who are starting with plastic kits. Assembly is required, with a stated assembly time of 600 minutes. The set fits naturally into work on scale models, miniatures and other detailed assembly projects where trimming, smoothing, positioning and fine brushwork all play a part in the finished result.
Model tools
Italeri Craft Knife Set with 6 Blades
510050822€16.99
The Italeri Professional Craft Knife with 6 blades brings precise cutting control to model making, paper work and other detailed bench tasks. A metal handle with a knurled silver grip, blue upper section and gold collar gives the knife a balanced, tool-like feel in hand while guiding careful cuts along edges, markings and small components. The included blade set supports repeated use across longer projects, with replacement blades ready when a fresh edge is needed for clean trimming. This format suits builders who work through assembly stages over time, especially where accurate scoring, shaping and material removal help parts fit neatly. The 600 minute assembly time in the product data points to projects with a longer build rhythm, where a dedicated cutting tool stays in regular use rather than appearing for a single step. On a modelling bench, the knife can be kept close for opening cut lines, refining small sections and preparing surfaces before the next stage of a build. Used alongside an assembly kit, it supports focused, controlled work on fine details and helps keep intricate hobby tasks precise from the first cut to the final adjustment.
Model tools
Italeri Craft Knife with 5 Blades No. 11
510050818€8.29
The Italeri Craft Knife with 5 blades No. 11 brings a precise cutting tool to model benches and craft tables, combining a slim metal handle with the narrow pointed blade shape used for close, accurate work on small parts and marked lines. The No. 11 format is suited to trimming, scoring and careful carving where a broader blade would block the view of the cut. The handle features a textured knurled section that helps keep finger placement steady during short controlled movements. Alongside the fitted blade, 4 spare blades are supplied, so fresh cutting edges are ready when a task calls for a cleaner pass through paper, masking material or thin modelling stock. Protective caps are also included for covered storage between work stages. Assembly is required. Assembly time: 600 minutes. On a model bench, the knife supports clean preparation before painting, fitting or finishing, and it also suits paper crafts that rely on narrow cuts and sharp corners. The compact format works well for keeping one blade in use while the remaining No. 11 inserts stay ready as replacements for later sessions.
Model tools
Italeri Cutting Mat A 230 x 160 mm Hobby Mat
510050829€9.99
The Italeri Cutting Mat A brings a defined cutting surface to model benches with a self-healing mat body, a printed measurement grid and diagonal angle guides. Its compact format supports trimming, marking and alignment work in a controlled area, whether sheet material, decals or small model parts are being prepared for the next build step. The mat is shown with a rectangular shape, rounded corners and visible number markings around the edges, giving clear reference points for measuring and positioning. The stated size is 230 x 160 mm, while the mat print shown in the image reads 220 x 180 x 3 mm, so the usable format is presented here only as provided by the product data. The 3 mm thickness shown on the mat adds a defined working layer between the bench and the blade path. Grid intersections and diagonal guides help when checking spacing, repeating cuts or setting angles before a knife touches the surface. On a modelling table, this format suits focused tasks such as trimming decals, cutting masking material or squaring small parts before assembly. Assembly kit for ages 14+; assembly required, assembly time 600 minutes.
Model tools
Italeri Locking Tweezers Fine Serrated 160 mm
510050821€12.49
Italeri Fine Serrated Locking Tweezers 160 mm bring precise control to detailed modelmaking tasks where small parts need steady handling. The long, slim metal form and pointed working ends make it easier to reach confined areas, align delicate components and hold them in place during careful assembly. The fine serrated gripping surfaces add traction at the tips, which helps when lifting tiny pieces, adjusting narrow parts or positioning decals and other miniature details. A locking mechanism keeps the tweezers closed after pressure is applied, so the grip stays consistent while a part is moved into place. At 160 mm, the tool offers extra reach across larger assemblies while still allowing close, accurate handling at the bench. The central grip section supports controlled finger placement during slow, exact work on kits and hobby builds. Used during model assembly, touch-up placement or detail fitting, these tweezers suit tasks where direct finger contact would block the view or disturb alignment. The 14 Years age marking is stated in the data. Assembly is required, and the data lists an assembly time of 600 minutes.
Model tools
Italeri Long Nose Plier Precision Hobby Tool
510050812€11.49
Italeri Long Nose Plier brings precise control to detailed model and hobby work with long, tapered jaws that reach into narrow spaces and handle small components with a steady grip. The slim plier format suits bench tasks where exact placement, careful bending and clean positioning matter, whether working around tight assemblies or adjusting fine parts before final fitting. The dark metal head and curved handles create a focused hand tool layout that supports controlled pressure during close work. Its needle style jaw shape helps when guiding thin material, holding delicate pieces in place or retrieving parts from confined areas that broader tools cannot reach easily. The single tool format keeps the setup straightforward for targeted workshop use, and the compact profile fits naturally alongside cutters, files and other model making essentials. Assembly kit is listed among the included components. On a hobby bench, Italeri Long Nose Plier suits tasks such as aligning small model parts, bending fine wire and managing detail work around narrow joins. The 14 Years marking is stated in the product data. Assembly time is listed as 600 minutes.
Model tools
Italeri Masking Tape Roll 3 mm x 18 m 2-Pack
510050826€4.891 m = €0.27
Italeri Masking Tape Roll 3 mm x 18 m 2-Pack brings a precise masking format to paint and finishing work on assembly kits. The narrow 3 mm width helps track fine contours, slim borders and small surface sections where broader tape can be harder to place cleanly. Each roll provides 18 m of tape, and the pack contains 2 rolls for ongoing workshop use across multiple stages. The roll format allows short strips, longer runs or layered sections to be cut as needed for the task at hand. On painted parts, the tape can be placed along edges before the next colour is applied, then lifted after the paint stage is complete. This makes it useful for separating adjacent colour areas, protecting selected sections and keeping detail work controlled on smaller components. As an assembly kit accessory, it fits naturally into build routines that involve painting, marking boundaries and refining finishes over extended sessions. On the bench, the 2-roll pack supports repeated use during body painting, detail accents and correction work. The 600-minute assembly time and 14 years marking place it within longer, more involved kit projects where careful preparation and clean paint separation matter.
Model tools
Italeri Masking Tape Roll 6 mm x 18 m 2-Pack
510050827€5.491 m = €0.31
Italeri Masking Tape Roll 6 mm x 18 m 2-Pack brings a precise masking format to model finishing, with 2 narrow rolls that help define paint edges on small parts and tight surface sections. The 6 mm width gives close control where wider tape can cover surrounding detail, making it useful for trim lines, framed areas and other narrow paint boundaries. Each roll provides 18 m of tape, so the pack stays useful through repeated painting sessions and multi-step finishing work. The slim format can be laid along straight runs or guided around smaller sections that need a controlled edge before colour is applied. As an assembly kit accessory within the model supplies range, it fits naturally into bench setups focused on painting, detailing and surface preparation. Assembly time is stated as 600 minutes. Batteries are not included. On a workbench, the 2-roll pack supports ongoing masking tasks across more than one build or across several paint stages on the same model. It also works well as a reserve supply for hobby setups that regularly handle fine-line paint separation and careful finishing on scale subjects.
Model tools
Italeri Mini Diamond File Set 3 Pieces 100 mm
510050820€13.99
The Italeri Mini diamond file set brings precise hand finishing to small parts, with 3 compact files in a 100 mm size that suit close, controlled work at the bench. The set is built for detail-focused tasks where edges, openings and contact points need careful adjustment rather than heavy material removal. The 3 included profiles cover different shaping needs across model and craft work. A flat file works along straight sections and flat faces, a round taper reaches curved channels and drilled openings, and a pointed profile gets into corners where broader tools cannot follow. The diamond-coated surfaces support steady abrasion on fine areas, making the set useful for smoothing, deburring and refining joins on small components. Assembly is required, and the stated assembly time is 600 minutes. On model parts, the files can be used to clean cut points, tune mating surfaces and sharpen small contours before final finishing. They also suit careful workshop use on detailed components where short strokes and close control matter more than tool size. The compact format stores easily with other bench tools and stays ready for repeated touch-up work during longer building sessions.
Model tools
Italeri Mini snips straight for photo-etched
510050817€16.99
Italeri Mini snips straight for photo-etched bring a focused cutting tool to detailed model work, where small metal parts need a clean separation before fitting and finishing. The straight cutting form suits close access on fine components, helping maintain control during trimming steps that can shape the final look of a build. The tool sits within the Italeri Professional tools and brushes range, a line centered on detail and precision for scale modelling tasks. Its compact format supports careful hand positioning around narrow attachment points and small etched sections. The product data states metal construction, which matches the precise, workshop-oriented character of the tool. Assembly is required, and the stated assembly time is 600 minutes. The included components are listed as an assembly kit. On the bench, these mini snips fit naturally into stages such as preparing photo-etched details, refining small parts before placement, and cleaning up pieces ahead of gluing or painting. The 14 Years age marking is stated in the product data, making this a clearly specified hobby tool for older builders working through longer, detail-led model sessions.
Model tools
Italeri Modelling Workstation MDF DIN A3
510050833€48.49
The Italeri modelling workstation brings a dedicated bench format to scale model work with an MDF structure and a DIN A3 footprint that frames assembly, painting and detailing in one organised space. On the main surface, a gridded cutting mat supports measured trimming and part placement, while the upright rear section keeps frequently used tools visible instead of scattered across the table. Multiple hole sizes and horizontal slots accommodate different hand tools, including brushes, tweezers, files and cutters, so each type can be stored in a fixed position. The stepped rear layout also creates separate zones for paint jars, glue bottles and small accessories, which helps keep the central work area open for body shells, subassemblies and loose components. This layout suits careful tasks such as dry fitting, masking, touch-up painting and decal preparation, where quick access to the next tool matters as much as the tool itself. Assembly is required, and the stated assembly time is 600 minutes. During longer bench sessions, the workstation supports a tidier rhythm: tools return to the same holder, paints stay grouped at the back, and the DIN A3 surface remains available for the current stage of the build. It fits naturally into model making routines that move between trimming parts, checking alignment, painting details and setting assemblies aside between steps.
Catalogues & merchandise
Italeri Paper Shopper Medium 32 x 40 x 13 cm
510009078€1.29
The Italeri Paper shopper medium combines a clean white paper finish, bold front printing, and a practical 32 x 40 x 13 cm format for carrying modelling purchases with a clear branded look. Twisted paper handles sit neatly at the top and give the bag a straightforward hand-carry grip for shop collections, events, or gift presentation. The front design centers on the Italeri logo, including the stylized red and green emblem, black aircraft silhouette, and the line modellismo in scala dal 1962 as printed on the bag. Beneath it, a 3 x 3 grid adds visual detail with illustrated references to different modelling subjects, including aircraft, helicopters, trucks, soldier figures, motorcycles, military vehicles, ships, and classic cars. That printed layout gives the shopper a strong connection to the wider scale modelling world rather than a plain unmarked carrier. Used at a hobby event, in a retail setting, or for handing over a model-related gift, the medium format offers a tidy way to carry supplies while keeping the Italeri identity visible. The rectangular shape fits naturally into counter, shelf, and takeaway use where a branded paper bag suits the occasion.
Model tools
Italeri Pin Vice Hand Drill with 5 Bits
510050831€13.99
The Italeri Pin Vice brings controlled hand drilling to fine model and craft work with a double-ended metal body, a swivel top and 5 included drills. In the hand, the compact tool supports slow, deliberate rotation, making it easier to open neat holes in small parts where close control matters more than speed. The double-ended construction keeps 2 drill sizes ready in the same tool, which helps when a build moves between pilot holes and wider openings. Its knurled grip gives the fingers a firmer hold during repeated turns, while the swivel top stays planted against the palm or fingertip to guide pressure as the bit cuts. This manual setup suits delicate materials and small-format components that benefit from measured drilling rather than fast motorised force. Assembly is required and takes 600 minutes. On the workbench, the Italeri Pin Vice fits naturally into scale model preparation, part correction and detail work. It can be used to open mounting points, refine alignment holes or prepare surfaces for added components, making it a useful tool for careful, step-by-step bench sessions.
Model tools
Italeri Plastic Modelling Tool-Set Hobby Kit
510050815€19.99
Italeri Plastic Modelling Tool-Set brings the core bench tools for detailed plastic kit work into one focused set. Side cutters, a precision craft knife, a flat metal file and a blue cutting mat support the careful rhythm of separating parts, refining edges and preparing pieces for assembly at the workbench. The side cutters are suited to removing small components from sprues with controlled snips, while the craft knife handles close trimming, scoring and fine cleanup around edges and attachment points. A spare blade case adds replacement blades for continued use. The flat metal file helps refine cut areas after removal, which is useful when parts need a cleaner contact surface before joining. Printed measurement lines and angle guides on the cutting mat add a practical reference for alignment and repeatable cuts during model preparation. Assembly is required, with a stated assembly time of 600 minutes. The set suits longer build sessions where several tools need to stay within reach, whether parts are being cut from the frame, edges are being cleaned up, or measured trimming is part of the next step. Recommended age: 14 years
Model tools
Italeri Precision Tweezer Curved Hobby Tool
510050813€5.99
The Italeri Precision Tweezer, curved is a hobby tool built for close, exact handling during model work. Its slim metal form and fine curved tip help guide small parts, decals and delicate detail pieces into place with more control than fingertips allow, especially when working around tight edges and narrow gaps. The pointed ends are shaped for careful pickup and repositioning, which is useful when aligning tiny components on scale builds or lifting pieces from sprues and work surfaces. The curved profile changes the approach angle at the tip, making it easier to see the placement area while keeping the hand slightly clear of the part being handled. A clear protective cap covers the tip during storage, helping protect the fine point between sessions. The pack contains 1 curved precision tweezer. 600 minutes assembly time is stated in the product data. On the workbench, the tool suits tasks such as placing decals, adjusting small fittings and moving fine components into exact position during detailed model assembly. It also works well for careful correction when a part needs to be lifted and set again before the build moves on to the next stage.
Model tools
Italeri Precision Tweezer Straight Hobby Tool
510050814€5.99
Italeri Precision Tweezer, straight (1) brings a focused tool shape to detailed model work, with a long straight metal form and pointed tips that help guide small parts into place. In miniature assemblies, decals, fine wire and tiny fittings often need a more exact grip than fingertips can provide, especially when working around narrow joins and closely spaced details. The straight profile keeps the working angle direct, which helps when aligning parts on flat surfaces or reaching into confined sections of a build. Pointed ends support careful pickup and placement of photo-etched parts and other small components that can shift easily during handling. The metal construction adds the firm feel needed for repeated use across longer bench sessions. Assembly time is stated as 600 minutes. That makes precise handling especially relevant when a build moves through many separate fitting, positioning and finishing steps. On the workbench, this tweezer suits tasks such as setting a small detail into adhesive, adjusting a fine piece before it sets, or moving a delicate part into a tight spot without covering the area by hand. Italeri marks this tool for ages 14 Years and up.
Model tools
Italeri Professional Cutter Flush Cutter Tool
510050828€13.99
The Italeri Professional Cutter is a flush cutter tool built for close, accurate trimming in model and craft work. Black metal cutting jaws meet at the edge for neat separation of photo-etched parts, thin wire and plastic, giving small components a cleaner start before test fitting, gluing or painting. Its spring action reopens the cutter after every squeeze, which keeps repeated cuts moving smoothly during long assembly sessions. The blue insulated grips add a secure hand position for controlled pressure when working on narrow sprue gates or fine attachment points. The product data states assembly is required, with an assembly time of 600 minutes, and the 14 Years age marking places it with more detailed hobby tasks rather than quick casual use. On the workbench, the Italeri Professional Cutter suits the stage where parts need to come free cleanly and edges need less follow-up trimming. It can be used while preparing plastic kit components, shortening thin wire to length, or separating small etched details before placement, helping keep the build process precise and orderly.
Model tools
Italeri Spare Blades Pointed 5-Pack for #50822
510050825€4.59
Italeri Spare Blades pointed 5 offers a focused refill set for precise model-building work, with 5 pointed replacement blades made for tool #50822. The fine point shape suits careful trimming, scoring and detail cutting where narrow access and a sharp tip matter during assembly and finishing. As an assembly kit, this set supports ongoing bench work by keeping matching replacement blades ready for the correct handle format. The 14 Years marking is stated for the set, and the data lists assembly required with an assembly time of 600 minutes. The compact refill format makes sense for repeated workshop use, especially when clean cuts on small parts, edges or thin material call for a fresh blade rather than continued use of a worn one. The pointed profile is the defining feature here, giving the cutting edge a shape suited to controlled, exact work rather than broad slicing. On the workbench, the blades fit naturally into model-kit routines such as separating parts, refining edges and making small corrective cuts during longer builds. Kept alongside handle #50822, the 5-blade set provides a ready stock of matching replacements for steady, detail-led hobby sessions.
Model tools
Italeri Spare Blades Pointed for 50815/50818
510050824€2.79
Italeri Spare Blades pointed for 50815/50818 adds a focused refill set to the Professional Tools range, with 5 classic fine point blades supplied for detailed model making tasks. The pointed profile suits careful trimming, scoring and close work where a narrow tip helps follow small edges, openings and shaped sections with more control than a broader blade form. The pack is listed as an assembly kit and is intended as a replacement blade set for Italeri tool numbers 50815 and 50818. That direct tool reference matters at the workbench, because the blade shape is matched to those handles rather than presented as a generic craft refill. With 5 blades in the set, a fresh edge is available when repeated cutting on sprues, sheet material or masking media starts to reduce precision. The fine point format also supports detail-oriented tasks that need a clear view of the cut line while working in tight spaces. A 600-minute assembly time is stated in the data, and assembly is required. Suitable from 14 years, this refill set fits naturally into model building sessions that move between part cleanup, careful shaping and exact finishing cuts on small components.
Model tools
Italeri Sprue Cutter for Plastic Hobby Tool
510050811€9.49
The Italeri Sprue Cutter for Plastic brings a focused cutting tool to model building, with angled jaws, blue coated handles and a compact format that sits neatly at the workbench while separating plastic parts from sprues. Its plier-style layout supports controlled hand movement when small components need to be released cleanly before the next assembly step. A spring between the handles helps the cutter reopen after each cut, which keeps the motion consistent during longer building sessions. The central metal pivot guides the jaws through repeated opening and closing, while the short cutter head helps reach tight connection points on crowded frames. This makes the tool useful when working around narrow gates, fine edges and closely spaced parts that need careful removal before trimming or fitting. Assembly is required, with a stated assembly time of 600 minutes. On the bench, the cutter fits naturally into the early stages of a scale model project, where parts are removed, grouped and prepared before sanding or joining. It also suits later detail work when a fresh section of the sprue still holds smaller pieces that need accurate separation for the next stage of the build.