Truck & trailer accessories
Outfit your truck with premium accessories! From replacement parts to upgrades for your trailer – our range has everything your RC trucks need. Discover the options and optimize your rig today.
Truck & trailer accessories
Outfit your truck with premium accessories! From replacement parts to upgrades for your trailer – our range has everything your RC trucks need. Discover the options and optimize your rig today.
More
Electronics
1:14 12V LED-PCB Taillight, model accessory
500907388€57.99
A 7-section taillight layout is a defining detail on many scale truck builds, and this 1:14 LED-PCB set brings that look into a compact 12V lighting accessory. The pair is designed as matching left and right boards, each marked L or R, creating a clear basis for symmetrical rear installation on a model vehicle. Each green PCB carries surface-mounted electronic components and preattached wiring, giving the lighting setup a tidy technical character once installed behind the rear light positions. The 5 attached leads on each board are colour coded in blue, black, yellow, red and white, which helps keep the wiring paths distinct during integration into an existing electrical layout. Mounting holes near the lower corners support fixed placement inside the body or light housing where a secure fit is needed. In workshop-style upgrade projects, the mirrored board design suits truck or trailer rear ends that need matching light units on both sides. The 12V specification makes the set suitable for model electrical systems built around that voltage, while the compact board format leaves room for careful routing and clean finishing in detailed 1:14 installations.
Basic accessories
1:14 2-Axle Boxed Trailer, model kit
500907731€589.99
A 2-axle box trailer is a familiar sight in road freight, built to carry cargo in a closed body while keeping the load protected on the move. This 1:14 model kit brings that transport format into a detailed build with a laser-cut steel frame, a box body with CNC-milled aluminum parts, and the long, clean proportions of an enclosed trailer behind a tractor unit. The chassis uses 3 mm and 1 mm steel, while the bogie is formed from sheet steel in a sandwich structure. Wide chromated wheels run on ball bearings and carry wide tyres, and steel underride protection sits on the left and right sides. At the rear, an 8 mm aluminum bumper adds another machined metal detail, and a 1:14 trailer splash guard completes the lower section. The body measures 545 mm in length, 195 mm in width, and 290 mm in height, with a total weight of 4,800 g. Assembly is required, with a stated assembly time of 600 minutes. In use, the rear loading door opens on aluminum hinges through 270°, and magnets handle the door locking. Coupled behind a suitable 1:14 tractor unit, the enclosed body suits scale logistics scenes, articulated truck displays, and workshop builds that focus on metal construction, moving parts, and realistic trailer proportions. The kit includes instructions.
Basic accessories
1:14 2-Speed Shift Gearbox Compact, gearbox
500907265€199.99
A 2-speed transmission changes the character of a scale truck build, and this 1:14 Compact gearbox brings that function into a neatly machined aluminium unit. The compact housing gives the drivetrain a technical focal point while keeping the installation footprint suited to tighter chassis layouts. The assembly data points to use with the original Tamiya motor, so the gearbox is built around a clearly defined motor fitment rather than a vague universal claim. The housing uses a front circular mounting face with multiple screw points, creating a structured base for fastening into the model. A shaft coupling is secured with a 3 x 3 mm set screw, and the instructions specify gel-type thread lock on the marked fastening point for a firm mechanical connection. The motor plate is attached with 3 x 8 mm screws, and an assembly dimension of 11 is shown in the motor fitting step. An optional servo mount for the 2-speed function is referenced in the documentation. In a 1:14 road truck or working vehicle project, this gearbox suits builders who want the drivetrain to feel more like a scaled mechanical system rather than a simple direct drive layout. It also fits detailed upgrade builds where aluminium parts, visible fastening points and a dedicated shifting mechanism add workshop character to the chassis.
Basic accessories
1:14 3+1-section Trailer Taillight, model part
500907261€15.99
A 3+1-section taillight layout is a familiar detail on working trailers, and this 1:14 scale set brings that look into model form with compact rear light components for truck and trailer builds. The combination of shaped housings and separate coloured inserts gives the rear end more structure than a printed or plain surface alone. Silver-grey moulded parts form the taillight bodies, while the transparent inserts add the distinct colour zones that define each section. The set includes paired components for a balanced rear installation, making it suitable for left and right placement on a trailer model. The small parts format suits careful detailing work, especially where scale realism depends on visible separation between housing and lens areas. On display, the layered construction creates a more technical finish; on a running model, it strengthens the road-vehicle character of the rear section. This accessory fits naturally into workshop sessions focused on upgrading a trailer body, refining a custom build, or replacing simplified rear details with a more defined light arrangement. The 14 years marking is stated for the set, matching its small-scale hobby character and detail-focused handling.
Basic accessories
1:14 4-section Trailer Taillight, model accessory
500907262€15.99
A 4-section taillight layout is a small detail with a strong effect on the look of a scale trailer, and this 1:14 set focuses exactly on that rear-end finish. The set is built around 2 taillight units and matching coloured inserts, giving model builders a clear route to a more defined lighting arrangement on compatible trailer projects. The parts shown for this accessory include red, orange and clear lens elements, allowing the different sections of the taillight to be represented with the right colour separation instead of a single uniform piece. The rectangular format and segmented front face suit the visual language commonly used on trailer rear assemblies in scale form. Because the set is dedicated to 1:14 use, it fits naturally into model scenes where proportions matter and small exterior details shape the overall impression. Age marking: 14 Years. On workshop builds, restoration tasks or visual upgrades, these taillights can be used to refresh an older trailer body or complete a new rear frame with a more convincing scale finish. They also suit hobby benches where body details, marker layouts and rear-end styling are handled with the same care as the main chassis and running gear.
Truck & trailer accessories
1:14 7.2V SMD-LED Orange, model accessory
500907397€10.29
Compact lighting details can change the whole character of a scale build, and this 1:14 SMD-LED set brings that effect into model-making with 2 orange light units rated for 7.2 V. The small-format layout suits hobby projects where visible lighting is wanted without taking up much installation space. The set is built around SMD-LED components and is intended for model electronics work in 1:14 applications. Twisted connection wires support orderly cable routing through tighter body sections or chassis areas, while the included resistor parts provide the electrical components shown for installation. The orange light colour works well for marker-style accents, signal-style detailing or replacement tasks on existing builds. As a model accessory rather than a complete vehicle system, the focus stays on adding or restoring a specific lighting function within a custom setup. This format suits workshop benches, conversion projects and repair jobs where compact light components are needed for scale-focused finishing. It also fits builders refining trucks, trailers or other compatible 1:14 models with a more defined illuminated detail.
Basic accessories
1:14 Air Horn-Set MB Actros, model accessory
500907161€39.99
Air horns are a defining detail on many show trucks, and this 1:14 Air Horn-Set MB Actros brings that familiar look to a scale build with 2 trumpet-style horn units in chrome brass. The long tubes, flared bell openings and compact bracket mounts create a clean visual match for truck-focused detailing work. Each horn is shaped as a separate component, making the set suitable for adding roof-mounted or exterior trim accents to an MB Actros model in 1:14 scale. The chrome brass finish gives the parts a reflective metallic appearance that stands out against painted cab surfaces and other exterior fittings. Visible screw-mounted brackets beneath the horns provide defined attachment points, which helps keep placement precise during a custom build or restoration project. As a model accessory rather than a complete vehicle, the set focuses on visual realism through scale-correct form and material presence. On a shelf display, in a workshop scene or as part of a truck conversion, the horn pair adds a recognisable finishing touch to the upper bodywork. The set also suits replacement use when an existing build needs fresh exterior detailing for a more complete Actros look.
Basic accessories
1:14 Air Horn-Set, model accessory, brass
500907096€29.49
Air horns are a defining visual cue on classic truck builds, and this 1:14 Air Horn-Set adds that detail with 2 clarions in different lengths. The set uses brass with a nickel-plated finish, creating a bright metallic look that suits scale cabs, roof bars and custom bodywork. The combination of 1 long and 1 short clarion opens up more authentic detailing than a matched pair alone, especially on builds that follow full-size truck styling. Brass gives the parts a precise formed shape, while the nickel-plated surface adds the chrome-style appearance often used for exterior trim. Mounting parts are included for fitting, and the drill template provides a practical guide for positioning the holes before installation. That makes the set useful both for fresh projects and for upgrading an existing 1:14 truck with a more finished exterior layout. On a shelf, the horn set sharpens the silhouette of the cab with a recognisable heavy-truck detail. In a workshop build, it adds a focused finishing step that complements paint, lighting and other scale accessories without changing the base character of the model.
Basic accessories
1:14 Air Suspension Bellow, spare part, hard
500907358€6.99
In 1:14 scale model work, the smallest suspension parts often decide how cleanly a repair or rebuild comes together. This Air Suspension Bellow set provides 2 hard bellows with dimensions of 20 x 18 mm for model applications that call for this exact format. The stated hard specification makes this pair suitable where a firmer component is needed within the suspension area, while the 20 x 18 mm size gives a concrete reference for fit planning before installation. As a dedicated spare part rather than a general accessory, the set is aimed at targeted maintenance, replacement work and parts matching in existing 1:14 model assemblies. The 2-piece format also supports jobs that require a matched pair instead of a single replacement. Whether the task is restoring a used chassis, replacing worn suspension elements or keeping key workshop spares on hand for future service, this set stays focused on one clearly defined function. For model-building enthusiasts, that kind of exact component choice helps keep repair work organised and scale-specific.
Basic accessories
1:14 Air-suspen. bellow, model accessory
500907357€6.99
Air suspension details play a defining role in the look of a scale truck chassis, and this 1:14 air-suspen. bellow set adds that compact technical touch with 2 soft bellows sized at 20 x 18 mm. The pair is suited to model-building work where suspension areas need a matching replacement part or a scale-focused finishing element. The soft construction supports fitting on compatible assemblies where a more flexible part is required. With 2 matching bellows in the set, the format works well for axle or chassis detailing on 1:14 builds that use air suspension styling cues. The stated 20 x 18 mm size gives a concrete reference when comparing existing installed parts or planning a new layout around available mounting space. As a model supplies component, the set fits naturally into repair work, parts organisation and custom project preparation without taking up much room in the workshop. On an in-progress truck build, the bellows can be used to refine visible chassis sections with a more technical scale appearance. For maintenance or replacement work, the pair offers a straightforward way to swap worn compatible parts while keeping dimensions aligned with the rest of the assembly.
Basic accessories
1:14 Alu Stow Case, storage rack for wood plank
500907449€55.99
The 1:14 Alu Stow Case brings workshop-style order to a model setting with an aluminium support frame, light wood elements, and a compact wall-mount layout. Its H-shaped metal bracket with side tabs and pre-drilled holes gives the structure a clear backbone while the wood sections create distinct storage levels for matching plank parts. The set is supplied as unassembled components, with several rectangular wood slats or panels, 4 black cylindrical spacers, and 4 screws shown among the included hardware. That combination makes the build itself part of the appeal for model-building enthusiasts, as the frame, spacers, and wood pieces come together in a scaled storage feature rather than a generic shelf. The 1:14 scale suits detailed diorama work, garage scenes, and truck workshop displays where accessories need a defined place instead of being scattered across the layout. The contrast between the silver-coloured frame, black hardware, and pale wood also gives the finished rack a technical workshop look. Mounted in a model garage, loading area, or service scene, the stow case adds a practical structure that supports tidier placement of wood planks and related accessories. It also works as a small organiser beside a hobby bench, where the separate sections help keep display parts and scale workshop details together. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Alum. Cylinder mount GH, model part
500907476€46.99
This 1:14 aluminium cylinder mount GH set brings machined metal hardware into detailed model work with a compact 2-piece mounting solution for compatible assemblies. The silver finish and precisely cut shapes give the parts a technical look that fits naturally into workshop-style rebuilds, upgrades and maintenance on scale vehicles. Each mount is formed as a fork-style bracket with several circular mounting holes, creating different attachment positions within the assembly. That layout supports careful placement of pins, pivots or linked components where alignment matters. The set is intended for model supplies use rather than as a standalone vehicle component, making it a practical choice when an existing build calls for replacement hardware or a metal alternative to standard fittings. The aluminium construction adds a crisp machined appearance, while the GH designation keeps the part identifiable within a parts-based setup. On the bench, the set suits hobby tasks such as refreshing worn mounting points, adapting a custom mechanical layout or preparing a scale model for further detailing. Age marking: 14 Years. Batteries are not included. Warning! Not suitable for children under 14 years.
Tyres & rims
1:14 Alum. Fr. wide wheel, wheel rims
500907412€74.99
These 1:14 aluminium front wide wheel rims are built for model-building enthusiasts who want a more defined wheel setup on compatible RC vehicles. The 2-piece set uses a hex mount and is intended for the front axle, combining a technical fit with a machined metal look that suits detailed scale builds. The rim design shown here pairs a silver finish with oval ventilation-style cutouts, a black centre section and visible bolt detailing around the hub area. That combination gives the wheel face a purposeful appearance often sought for truck, crawler or workshop-style conversions. As replacement or upgrade parts, the rims can refresh a worn front end or shift the visual character of a build toward a more mechanical, scale-focused look. The 1:14 scale keeps the proportions in line with matching model platforms, while the wide format changes the visual presence at the front axle. On the bench, these rims suit rebuilds, parts swaps and detail-led custom projects where the wheel design matters as much as the body style. Age marking: 14 Years. No batteries required.
Tyres & rims
1:14 Alum. Low Loader, wheel set, twin-wheel
500907136€50.99
Low loader trailers rely on their wheel setup for much of their character, and this 1:14 aluminium twin-wheel set brings that scale detail into focus with a distinctly technical look. The machined metal rims, grooved outer profile and separate hub caps create the kind of hardware-led finish that suits detailed trailer builds and replacement work alike. Each rim shows a deep recessed centre with circular bolt holes, giving the assembly a realistic mounting pattern and a purposeful visual depth. The twin-wheel configuration is shaped for low loader applications, where paired wheels are part of the recognisable trailer layout. The silver metal finish and grey centre caps create a clear contrast across the wheel face, so the hub area stands out cleanly once fitted. With 2 hub caps included, the set provides the centre-cover detail needed for a more complete axle appearance. In workshop use, the set suits fresh trailer projects, visual upgrades, or replacing worn wheel hardware on compatible 1:14 models. Age marking: 14 Years. The compact component format also makes it a practical choice when a build calls for scale-correct wheel detailing without changing the overall trailer concept.
Basic accessories
1:14 Alum. Ramp hinge GH, model spare part
500907475€30.99
In 1:14 scale builds, small hardware parts shape how moving sections sit and operate. The Alum. Ramp hinge GH supplies a compact metal hinge component for model assemblies that need a clean, defined pivot point on a ramp, flap or linked section. The part uses a long flat bar layout with 2 countersunk outer holes for screw mounting and a central double-lug section with circular through-holes for the mechanical connection. That geometry supports a flush fit at the mounting surface while leaving space for a pin, bolt or axle through the lower tabs. The silver aluminium construction and machined finish give the component a technical appearance that suits exposed installation on detailed truck or trailer builds. With 2 pieces included, matching left and right mounting positions or a direct replacement pair can be equipped in one pack. This spare part fits hobby work where worn hardware needs replacement or a custom model section calls for a compact hinge layout. On workshop benches and during rebuilds, the defined hole positions and simple bracket form support accurate integration into compatible 1:14 model projects. Warning! Not suitable for children under 14 years.
Tyres & rims
1:14 Alum. Rear wheel, model accessory, hex
500907352€114.99
A 1:14 scale wheel upgrade changes the whole stance of a model, and this aluminium rear wheel set brings that effect straight to the axle area with a bright metal finish and a distinctly technical look. The long-hole design and hex layout give custom truck or trailer projects a more defined rear wheel section with visible machined detail. The set is built around 2 rear wheels and is intended as a model accessory rather than a complete vehicle. The aluminium construction adds a solid metal appearance that suits workshop builds, display-focused projects, and scale conversions where the wheel area needs more visual depth. The rear wheel format concentrates the detailing where twin or dedicated rear axle setups draw the eye most strongly. The shaped openings create a purposeful rim face, while the separate hex components support installation on compatible model axles. Age marking: 14 Years. On a shelf, in a diorama, or as part of an RC truck rebuild, these wheel parts shift the look from standard running gear toward a more customised scale finish. They also suit enthusiasts refining an existing 1:14 chassis with more prominent metal wheel detail at the rear.
Basic accessories
1:14 Alum. Trailer Bumper Rear, trailer part
500907361€24.99
A rear bumper is one of the details that gives a scale trailer its finished outline, and this 1:14 aluminium version brings that technical look to the back end of the model. The set is designed as a trailer accessory and uses 2 metal components with a long, straight form for a clean, purposeful rear section. The assembly combines a flat mounting plate with a shaped channel piece, creating a structured layout rather than a single strip. Several pre-drilled fixing points are worked into the aluminium parts, including round holes and elongated slots. That hole pattern supports aligned mounting and leaves room for positional adjustment during fitting. The silver-coloured metal surface suits workshop-style trailer builds and blends naturally with other scale hardware on 1:14 assemblies. In a detailed truck and trailer project, the rear section often defines the final visual impression as strongly as the side rails or chassis details. This accessory fits that stage of the build with a compact, model-focused part that adds a crisp mechanical finish to the trailer end. The 14 Years age marking is stated in the product data.
Basic accessories
1:14 Alum. Trailer Coupling SAF, model accessory
500907155€99.99
Commercial trailers rely on a secure fifth-wheel connection, and this 1:14 Alum. Trailer Coupling SAF brings that characteristic detail into a truck model with a compact metal assembly and a distinctly technical layout. The aluminium construction, twin mounting rails and central coupling section create the look of a working rear chassis area that stands out on a workshop bench or in a finished road-haulage display. The assembly is shaped for installation on a compatible 1:14 model frame, with elongated mounting sections and fixing holes that support careful positioning within the chassis. Black contact pads on the upper section add visual contrast to the silver metal finish, while the central locking area gives the part the appearance of a realistic trailer interface. In detailed truck projects, components like the coupling help define the character of the rear platform, especially when the frame, mudguards and running gear are already in place. The SAF styling adds a recognisable commercial-vehicle reference without overwhelming the rest of the build. On a shelf, in a diorama or as part of a working truck conversion, the coupling adds a focused scale detail that strengthens the overall impression of the model. Age 14 Years. For model-building enthusiasts, it brings an authentic truck element into the chassis and supports a more complete heavy-haul scene.
Tyres & rims
1:14 Alum. Trailer Wheel, model wheel set
500907350€63.99
With its 1:14 scale format and long-hole rim pattern, this wheel set adds a crisp trailer detail that suits scale-focused model projects. The set contains 2 matching trailer wheels, making it suitable for paired axle positions where a uniform rim style matters. The silver metallic appearance shown in the design gives the wheels a machined, workshop-inspired character, while the deep rim profile creates a stronger visual presence on the trailer. Oval cutout slots around the outer face and the ring of small bolt details build up the multi-piece look that many model builders look for when refining a running vehicle or display build. The dark centre cap adds contrast to the bright rim surface, helping the wheel face read clearly even at smaller scale. As a spare or upgrade part in the Models & Accessories range, this set fits naturally into restoration work, visual customising, or replacing existing trailer rims with the same style on both sides. The 14 Years age marking is stated in the product data. For hobby benches, shelf displays, or detailed RC transport combinations, the 2-piece wheel set brings a focused scale accent without changing the overall character of the trailer.
Basic accessories
1:14 Alum. Transfer-gearbox Tipper 6x6, gearbox
500907610€169.99
A 6x6 truck layout depends on a drivetrain that can pass power cleanly through more than one axle line, and this 1:14 Alum. Transfer-gearbox Tipper 6x6 is built around exactly that task. The aluminium construction and transfer-gearbox format place it firmly in the technical side of scale model building, where mechanical function shapes the whole vehicle concept. The unit is intended for 1:14 scale use and belongs to the models supplies category, making it a focused choice for builders working on truck driveline systems rather than body accessories or decorative parts. Its transfer-gearbox design indicates a central role between the incoming drive and the connected axle shafts. The compact casing combines a formed housing with mounting points for installation into a chassis layout. The visible shaft connections support integration with rotating driveline parts in a multi-axle configuration. In workshop use, this component fits projects that need a replacement gearbox, a custom 6x6 conversion, or a more detailed truck transmission layout. Age 14 Years. It suits hobby builds where the mechanical structure remains visible in the planning stage and where each drivetrain part contributes to a realistic scale engineering setup.
Basic accessories
1:14 Alum. Underrun Protection, truck accessory
500907181€34.49
On full-size trucks, underrun protection is part of the functional rear structure, and in 1:14 scale it adds the same purposeful finish to a detailed model. This aluminium underrun protection is made for 1:14 truck projects and brings a clear commercial-vehicle character to the rear section. The assembly combines a long metal crossbar with 2 angled bracket sections, creating a defined structural part rather than a loose collection of fittings. The mirrored bracket plates feature several drilled holes for fastening, which supports accurate positioning during installation on a compatible model. The aluminium construction gives the part a crisp technical appearance that suits scale truck builds with exposed chassis details and visible rear equipment. As a dedicated accessory in the Models & Accessories range, it also fits naturally into restoration work where worn or missing rear hardware needs replacement. In workshop-style build sessions, the part can be used to refine a custom truck layout or restore a model to a more complete rear-end setup. It also adds a more convincing finish in display settings where the frame, rear cross area and underbody details remain visible from low viewing angles.
Tyres & rims
1:14 Alum. Wheels, trailer wheels, 2-piece
500907040€67.99
A trailer build gains a more technical scale finish with these 1:14 aluminium wheels, shaped for the CARSON-MODEL SPORT trailer and supplied as a 2-rim set. The polished metal look, deep-dish form and multi-hole face give the wheel area a clean workshop style that suits detailed truck and trailer projects. The rims are made of aluminium and are intended as wheel components for trailer running gear rather than as decorative parts alone. Each wheel is designed to work with 5 x 11 x 4 mm ball bearings, so the hub can be set up around that specified bearing size where the axle layout calls for it. The set format with 2 wheels suits trailer maintenance, part replacement or a coordinated visual update on an existing 1:14 setup. Age marking: 14 Years. Mounted on a matching trailer chassis, the metal rims sharpen the overall scale impression and bring a more defined finish to the axle area. They also fit naturally into workshop sessions focused on restoring a used trailer, refining a display build or preparing a model rig for regular driving use.
Tyres & rims
1:14 Aluminium Front Wheel Hubs, Model Part
500907278€74.99
Built for 1:14 model applications, these aluminium front wheel hubs bring a focused replacement part into the running gear where fit and connection matter most. The set contains 2 round hubs with a hex design, intended for the front wheel area and shaped for wide wheel layouts. The aluminium construction gives this component a clear mechanical role within the axle assembly, while the round hub form and hex interface define how the wheel mount connects into the drivetrain area. As a pair, the hubs suit maintenance work when existing parts show wear or when a front axle setup is being refreshed with matching replacement components. The wide wheel specification points to a broader hub profile, which matters where the chassis layout depends on the correct wheel seating and axle geometry. In workshop use, these hubs fit naturally into repair benches, parts boxes and ongoing rebuild projects for 1:14 vehicles. They also suit routine servicing where the front axle hardware needs a like-for-like exchange rather than a general universal part.
Tyres & rims
1:14 Aluminum Narrow Wheels, model rims
500907272€74.99
Commercial-style narrow wheels are a defining detail on many scale truck builds, and this 1:14 wheel set brings that look into a compact aluminum upgrade. The machined rims use a round-hole design that gives the wheel face a purposeful, realistic character, while the metal finish adds crisp contours that stand out on a display model or a running vehicle. The set contains 2 rims and uses a 2-piece construction with separate ring and hardware elements for the hub area. That layout creates more visual depth than a plain molded wheel face and gives model-building enthusiasts extra scope when refining a truck, trailer, or custom axle setup. The hex mounting is designed for compatible 1:14 applications, keeping the wheel connection defined at the axle while preserving the narrow format named in the designation. With a minimum age marking of 14 years, the set sits in the hobby segment rather than the toy shelf. Mounted on a scale truck chassis, the aluminum rims sharpen the side view and bring more structure to the wheel area. They also suit workshop-style conversion projects where a different rim profile helps complete a specific commercial-vehicle look.
Basic accessories
1:14 Aluminum Warning Sign, model accessory
500907448€29.99
High-visibility warning panels are a familiar sight on transport and service vehicles, and this 1:14 accessory brings that look into model form with a compact aluminum warning sign and matching striped decal. The red and white diagonal marking gives scale builds a recognisable rear detail that fits utility, haulage, and work-focused scenes. The aluminum parts shown for the set include 2 mirrored mounting brackets, each with a long slotted arm and a plate section for fastening. That slot shape allows the position to be adjusted during fitting, which helps when lining the sign up with bodywork or another mounting point on the model. The decal carries the classic diagonal stripe pattern used for warning visibility, adding a crisp graphic finish once applied. Together, the metal brackets and decal create a small but distinctive scale detail that changes the character of a build from plain bodywork to a more purpose-led vehicle setup. On a shelf, in a workshop scene, or as part of a running model with service-vehicle styling, the sign adds a clear finishing touch without dominating the rest of the build. The 1:14 scale keeps it in proportion for matching model projects, and the separate bracket pieces support a neat left and right installation layout.
Electronics
1:14 Angle Eyes Hella, model lights, white
500907574€52.99
Auxiliary lamps are a small detail with a big effect on a scale truck, and this 1:14 Angle Eyes Hella set brings that workshop-style finishing touch in a compact 2-piece format. The round lamps combine a white light look with chrome-look housings and separate mounting brackets, creating a front-end accent that fits naturally into detailed vehicle builds. The set is specified for 7.2 V and 12 V systems, with long black cables attached to each lamp for wired installation. That layout supports clean routing through the body or chassis area and leaves room for custom placement where the lighting concept of the model needs it. The round shape, reflective finish and bracketed base suit classic auxiliary-light positions such as bumpers, roof sections or other scale mounting points supported by the build. As a matched pair, the lamps help maintain a consistent left and right layout instead of mixing different light styles across the vehicle. In a workshop build, show truck project or detailed shelf model, these lamps add a recognisable Hella-style visual cue without changing the overall character of the vehicle. The 1:14 scale focus keeps the proportions aligned with larger truck models, while the wired format gives hobbyists scope to integrate lighting as part of a more individual setup.
Electronics
1:14 Angle Eyes LED PCB, model accessory
500907555€34.49
Angle Eyes lighting is a familiar styling cue in full-size vehicle culture, and this 1:14 LED set translates that look into a compact model-building format. The white SMD LED PCB is designed for 7.2 V and 12 V systems and brings a defined illuminated ring effect to compatible scale vehicle front ends. The set is built around compact light modules, fine connection cables and mounting parts shown in the included contents. That layout supports installation in tight body sections where larger lighting components would take up too much space. In a 1:14 build, the small-format PCB helps add lighting detail without overwhelming the proportions of the model. The white LED output suits headlamp styling with a clear, technical look, while the wiring layout supports connection into an existing compatible electrical setup. Mounted behind the front light area, the LEDs add a more defined visual signature when the model is on display, on a shelf, or integrated into a running vehicle project. Age marking: 14 years and up. A compatible model and a suitable power connection are required separately.
Electronics
1:14 Angle Eyes, LED set, blue SMD PCB
500907554€34.49
Blue Angle Eyes lighting brings a sharper custom look to 1:14 scale vehicle builds, with SMD LED PCB technology designed for operation on 7.2 V or 12 V systems. The set is aimed at model-building enthusiasts who want to add a clear lighting accent to a compatible project and extend the visual detail of the front end beyond the standard body finish. The compact electronic layout suits installations where space is limited around the body shell or light area, and the wired modules support placement within a scale build without dominating the visible structure. Blue illumination creates a defined styling effect that stands out in workshop displays, shelf presentation, or running sessions under lower ambient light. As a dedicated accessory from the models and accessories range, the set fits naturally into hobby projects that combine body detailing, electronics, and scale-focused finishing work. Age 14 Years. In a truck or other 1:14 model project, the lighting can be used to refine a custom road setup, add a more technical visual signature, or support a display-focused build with extra electronic detail. The set also works well for enthusiasts planning a fresh rebuild or updating an existing compatible model with a new lighting element.
Electronics
1:14 Angle Eyes, model light set, 7.2/12V
500907573€52.99
Angle Eyes lighting brings a sharper front-end signature to 1:14 model builds, with 2 round lamps designed for 7.2 V and 12 V operation. The white light effect suits scale truck projects that need a clear visual accent at the front, while the Hella-style form gives the setup a recognisable workshop and road-going look. Each lamp is connected by cable, which supports custom installation on bumpers, roof bars or other mounting points where extra lighting detail is wanted. The round housings keep the appearance consistent across both sides of the model, and the 2-piece format helps create a balanced layout rather than a single offset light source. On display shelves, in workshop scenes or during driving sessions, the lighting set adds a more technical finish to the bodywork without changing the core character of the build. The set suits hobby projects for ages 14 years and up and works well where scale detailing matters as much as driving action. Whether fitted to a road truck, a show build or a custom conversion, these lamps add a compact lighting element that strengthens the model's presence through shape, wiring and light effect.
Electronics
1:14 Angle Eyes, model lights, blue 7.2/12V
500907571€52.99
Blue Angle Eyes bring a striking Hella-style lighting accent to 1:14 scale model builds, combining a compact round lamp shape with 7.2/12V operation for compatible electrical setups. The 2-light configuration creates a matched front-end look that suits detailed truck and vehicle customisation. Each lamp is shown with its own cable, giving the set the core hardware needed for integration into a model's lighting layout. The round housings keep the visual effect focused and clean, while the blue light colour adds a tuning-inspired detail that stands out in display settings and scale scenes. As a model accessory rather than a complete vehicle, this set is aimed at hobby work where small visual changes shape the finished character of the build. Batteries are not included. Mounted on a compatible 1:14 project, the pair can frame the front section with a more technical, customised appearance. The set also suits workshop-style rebuilds, replacement work on existing models, or fresh scale projects where lighting details are part of the overall concept.
Electronics
1:14 Angle Eyes, model lights, blue Hella
500907572€52.99
Blue Angle Eyes bring a distinctive Hella-style lighting look to 1:14 model vehicles, combining round lamp bodies, chrome-look housings and blue accents in a compact 2-piece set. Designed for 7.2 V and 12 V systems, the wired layout supports installation on compatible builds where added front lighting is part of the visual setup. Each lamp is fitted with a mounting bracket and attached cable, giving the set the hardware needed for fixed placement on the model. The round format suits classic auxiliary-light styling, while the reflective housing adds a crisp technical finish that stands out on truck fronts, bumpers or roof bars where scale detailing matters. With 2 matching lamps in the set, the lighting arrangement stays visually balanced across the vehicle. On workshop-style custom builds, the pair adds a clear styling accent before the model heads onto the shelf or into driving sessions. On detailed road trucks and show builds, the blue Angle Eyes effect works as a focused visual upgrade that strengthens the scale character of the finished vehicle.
Basic accessories
1:14 Arocs Cab Locking Device, model accessory
500907590€37.49
Truck models in 1:14 scale gain extra workshop character with this aluminium Arocs Cab locking device. The component is designed as a dedicated model accessory and adds a defined locking element to the cab area, giving scale truck builds a more technical rear-chassis appearance. Its aluminium construction brings a crisp metal finish that stands out against painted body sections and darker chassis parts. In detailed truck assemblies, a visible locking mechanism helps the cab section read more like a working vehicle layout rather than a simplified shell. The Arocs designation keeps the part tied to a specific model theme, while the compact accessory format leaves room for individual build planning and custom installation choices within a 1:14 setup. As a model supplies part within the Carson range, it fits naturally into projects that focus on realistic hardware details rather than broad cosmetic changes. On a shelf, in a workshop-style display, or as part of an active truck build, this cab locking device adds a small but noticeable engineering accent. The 14+ age marking places it within hobby-oriented model projects where scale detail and component choice shape the finished result.
Electronics
1:14 Arocs Headlight, LED PCB, model accessory
500907596€70.99
The Mercedes-Benz Arocs is known on full-size roads and construction routes for its strong, purposeful front-end design, and that character carries neatly into this 1:14 lighting upgrade. The 1:14 7.2 V LED-PCB Arocs Headlight set adds a model-specific light arrangement with 2 mirrored electronic modules shaped for the left and right sides. Each module uses a compact PCB with visible mounting points, integrated light positions and attached wiring, creating a structured solution for fitting illumination into the front section of a compatible Arocs model. In addition to the main board-mounted LEDs, each side includes a separate wired LED element, expanding the lighting layout beyond a single light point. The mirrored construction helps keep the installation aligned with the vehicle's front geometry rather than relying on a universal board shape. The 7.2 V specification matches common model truck electrical setups and gives hobby builders a clear voltage reference for planning the installation. On a workshop bench, the paired boards suit careful detailing work around the cab front and headlight area. Once fitted, the left and right arrangement supports a more complete scale appearance for display, diorama scenes or running sessions with a compatible 1:14 truck model.
Basic accessories
1:14 Arocs Mainplate Batt Hold, model accessory
500907591€69.99
This 1:14 Arocs accessory brings 2 central chassis elements together in one aluminium set: a mainplate and a battery holder shaped for scale truck building work. In a model workshop setting, that combination supports a tidy foundation for rebuilds, replacements and ongoing project maintenance around the battery area. The designation names the Arocs platform and the 1:14 scale directly, making this part relevant for scale truck assemblies that need a matching structural component rather than a generic hardware substitute. Aluminium gives the set a metal construction that suits technical model layouts where the mainplate forms part of the core structure and the battery holder sits as a dedicated support element. As a model accessory within the Models & Accessories and Models Supplies range, it fits naturally into repair stock, upgrade planning and parts-led rebuild work. On the bench, this set suits damaged-part replacement, fresh chassis builds and detailed restoration tasks where a correct main section and battery mount are needed together. The 14 years and up marking places it in the hobby segment, where scale truck enthusiasts often work through fitting, alignment and component changes as part of the build process.
Electronics
1:14 Arocs Tip LED-PCB Taillight, model accessory
500907616€40.99
The Mercedes-Benz Arocs is a familiar sight in modern construction transport, and this 1:14 LED-PCB taillight set brings that working-truck character into a scale model with functional rear lighting. Designed as an Arocs Tip taillight accessory, the set includes 2 PCB units arranged as a left and right pair for a balanced rear-end layout. Each board works within an operating voltage range of 7.2 V to 12 V, which suits compatible model truck electrical systems used in hobby builds and upgrades. The lighting functions cover indicator left-right, driving light, brake light and reversing light, so the rear section can reflect several typical road-going signals through dedicated light points. The black carrier plates provide a compact base for the light elements, while the attached wiring looms are already fixed to each unit for connection into the model's electronics. Age 14 Years. Installed on a 1:14 tipper truck, the pair adds technical detail that stands out both on the workbench and during driving sessions. The mirrored arrangement suits rear body mounting on opposite sides, helping the finished model present a more complete truck look in motion and at rest.
Basic accessories
1:14 Auxiliary Head Lamp, accessory, 5 mm mount
500907052€15.79
Auxiliary lamps are a classic detail on working trucks and construction machines, where extra lighting shapes the vehicle's character as much as its function. This 1:14 accessory set brings that look into scale form with 2 round auxiliary head lamps designed for model customising. Each lamp is built for mounting on a lamp frame and uses a 5 mm mount, giving the set a clear fitting reference for compatible scale projects. The round form and chrome-finished housing create a bright metallic contrast that reads cleanly against painted bodywork, bars and front assemblies. Alongside the 2 lamps, the set provides 2 blue and 2 white glasses, so the final appearance can be matched to the chosen build theme or visual setup. The paired layout also supports symmetrical placement across a front bar or roof-mounted frame. In workshop-style truck builds, construction models or other 1:14 vehicle projects, the set adds a compact styling detail that helps complete the front section with a more purposeful scale look. The parts suit hobbyists who refine body details, update lamp frames or add visual accents during a custom build.
Basic accessories
1:14 Auxiliary Head Lamp, model accessory
500907575€14.99
Auxiliary lamps are a small detail with a strong visual effect, and this 1:14 scale set brings that effect to model trucks and other compatible vehicle builds. The set contains 2 auxiliary head lamps with a 4 mm mount, giving hobbyists a compact lighting detail for front-end customisation on scale projects marked 14 Years and up. The round housings and clear lenses create the look of classic add-on driving lamps, making them a natural match for bumpers, roof bars, or other exposed mounting points where extra front detail matters. The 4 mm mount gives a defined fixing size for planning placement on a build or replacing existing lamps on a model already in use. As a dedicated accessory in the Models & Accessories range, this set focuses on exterior detailing rather than a full conversion, which keeps the upgrade targeted and easy to integrate into an existing 1:14 project. On display models, the pair helps complete the front view with symmetrical lamp placement and a more purposeful scale appearance. On working builds, the compact format suits hobbyists refining a truck, service vehicle, or custom body with period-style auxiliary equipment.
Basic accessories
1:14 Ceresit CM90 Easy Pallet, scale model
500907617€21.99
This 1:14 scale pallet with Ceresit CM90 Easy brings the look of transport-ready building supplies into model scenes with a clearly branded cargo format and a compact freight presence. The stacked load and wrapped finish create the visual image of a delivery that has just reached a depot, warehouse bay or construction site. The miniature load is based on a EUR pallet format and carries repeated Ceresit CM90 markings across the visible faces, which helps the accessory read clearly from different viewing angles. Transparent wrap around the stacked boxes gives the cargo a secured storage and handling appearance rather than a loose display stack. That distinction matters in dioramas built around logistics, site supply or commercial transport, where the state of the load shapes the whole scene. The pallet form also pairs naturally with 1:14 trucks, trailers, forklifts and loading zones in model layouts. Placed beside a loading ramp, inside a warehouse setting or on the bed of a scale transport vehicle, the pallet adds a specific construction-material reference instead of a generic cargo block. The compact format suits static displays as well as scene building, where a single freight unit can sharpen the industrial character of the overall layout. The 14 Years age marking identifies it as a hobby accessory for model-focused setups.
Basic accessories
1:14 Control platform, accessory
500907365€63.99
The 1:14 Control platform adds a functional industrial element to compatible model vehicle and construction layouts. Guard rails run around all sides of the rectangular deck, while a small front ladder defines the access point and gives the platform the look of a real working attachment. Across the floor, evenly spaced round holes create a perforated deck pattern that sharpens the technical character of the platform. Upright corner posts and horizontal rails shape a clearly enclosed standing area, while the underside carries triangular support brackets and circular cutouts that bring extra depth to the construction. The metallic silver finish underlines the workshop and site-equipment style, so the platform holds its visual presence both mounted on a model and placed within a display scene. In construction, maintenance or service-themed arrangements, the platform expands the range of realistic setup options around 1:14 vehicles and machinery. It also adds convincing structure for close viewing, where the ladder, rail geometry and underbody detailing become part of the overall scale impression.
Basic accessories
1:14 Driven Front Axle, RC truck axle, diff lock
500907267€234.99
Heavy truck drivetrains rely on the front axle to turn steering input into controlled movement, and this 1:14 Driven Front Axle brings that mechanical character into a scale RC truck build. Designed for TAMIYA trucks or vehicles with a 62 mm frame width, the assembly adds a driven front end with auto differential lock and a clearly defined fit reference for compatible chassis. The axle unit combines a central differential housing, steering linkage and wheel-end assemblies in one detailed mechanical module. Instruction data names ball bearings in 5x11x4 mm and 5x9x3 mm sizes, along with washers, pins, O-rings and mounting hardware that support the internal rotating parts and axle-end setup. The documentation also shows configuration options for versions with or without through-drive, allowing the axle layout to match the intended drivetrain arrangement. A front mounting set is referenced for installation, and the ZF mark shown in the assembly material adds a real-world engineering cue to the finished truck. In a workshop-style build, the axle becomes a focal point where steering hardware, drivetrain parts and chassis mounting come together in visible mechanical detail. Once installed beneath a 1:14 truck frame, it suits scale road tractors, construction trucks and other heavy vehicle projects that call for a driven front axle layout.
Basic accessories
1:14 Driver Cab Locking Device, model accessory
500907156€38.99
A driver cab locking device adds a functional mechanical detail to 1:14 scale truck projects, with an aluminium assembly that brings a realistic latch-style action into the model. The compact unit combines a shaped lever arm, angled support frame, pivot hardware and a horizontal tension spring, creating a technical look that suits exposed chassis and cab areas. The mechanism is built around guided movement: the lever arm actuates the linkage, while the spring returns the assembly to its resting position. Machined cutouts in the frame reduce visual bulk and underline the engineered character of the part. Black hex socket screws and multiple mounting points reinforce the workshop-style appearance that model-building enthusiasts often look for in functional upgrades. As a dedicated accessory rather than a decorative add-on, the assembly supports cab sections that need a defined locking or release action within a scale build. In a detailed 1:14 truck workshop scene, the metal linkage adds visible function alongside the bodywork and interior structure. It also suits conversion projects where a plain fixed cab is being reworked with a more mechanical opening and closing setup for display or hobby use.
Basic accessories
1:14 Euro-Pallet-Set, model accessory, 4 pieces
500907094€8.99
The Euro pallet is one of the defining elements of modern freight handling, and this 1:14 set brings that familiar format into model scenes with a compact, workshop-ready scale presence. Each pallet is shaped to echo the classic full-size design, adding a recognisable logistics detail to trucks, depots and loading areas. The set contains 4 pallets, each measuring 93 x 62 x 14 mm. The formed structure recreates the look of a wooden Euro pallet while using a moulded construction with a wood-like surface appearance. Open side entry spaces and the slatted top layout reflect the handling pattern associated with the original pallet format, which helps the accessory sit naturally in transport, warehouse or industrial dioramas. The matching dimensions across all 4 pieces also support a consistent scene layout when several loading points are arranged together. Placed on a trailer bed, beside a loading ramp or in a storage area, the pallets add scale reference and visual structure to freight-focused model setups. They also suit construction, farming and workshop scenes where cargo handling details help complete the overall setting. Age marking: 14 years+
Basic accessories
1:14 Euro-Pallet-Set, model accessory, 5 pcs
500907049€7.79
Freight details often define whether a 1:14 transport layout looks staged or convincingly in service. This Euro-Pallet-Set brings that warehouse and loading-yard character into model scenes with 5 beige pallets sized for 1:14 use and shaped in the familiar Euro pallet format. The set is suitable for Tamiya trucks and Carson trailers, making it a straightforward addition to existing transport combinations, depot layouts and cargo displays. The pallet form supports classic loading arrangements on trailer beds, at ramps or in storage areas, and the repeated 5-piece format helps build a more complete freight scene than a single cargo part can achieve. The beige finish gives the pallets a natural, workmanlike appearance that blends well into logistics, warehouse and industrial model settings without overpowering the vehicle itself. Whether arranged as stacked freight, placed individually on a trailer, or used to structure a loading zone, the pallets add scale reference and scene depth to transport models. Age 14 Years. The scope of delivery includes 5 items.
Electronics
1:14 Flashing Light Set MB Arocs Accessory
500907604€119.99
Built around the MB Arocs truck theme, this 1:14 flashing light set adds 2 beacon units that bring a recognisable working-vehicle accent to a scale build. The compact accessory format keeps the focus on a specific visual detail while strengthening the character of a model based on the Arocs subject. As a model accessory in the Models & Accessories and Models Supplies segment, the set is aimed at hobby builds where scale consistency matters. The 1:14 designation keeps the proportions aligned with matching truck projects, and the 2-light configuration gives the roof area or chosen mounting point a balanced appearance. Because the product data names the set specifically for MB Arocs, it fits naturally into truck-focused display scenes, workshop dioramas, and construction-themed layouts where the vehicle identity is part of the appeal. On the workbench, the set supports detail-focused finishing of a truck model with a clearly defined add-on rather than a broad rebuild. In display use, the flashing light format helps the model read more like a service or site vehicle, giving the finished build a stronger presence in shelf scenes and scale environments.
Basic accessories
1:14 Flatbed Underride Guard, accessory, 190 mm
500907078€39.99
Scale truck builds gain a sharper technical finish with this 1:14 flatbed underride guard in aluminium. The 190 mm part is made for model builders who want to extend the rear underbody detail of a trailer with a component that matches the look of metal chassis hardware and flatbed structures. As a dedicated accessory for 1:14 flatbed projects, the guard suits custom builds, visual upgrades and restoration work on existing trailer layouts. The aluminium construction brings a distinct metallic surface that works naturally with silver frame sections, crossmembers and other exposed undercarriage elements often seen on scale transport models. Its narrow, linear form gives the rear section a more defined outline and supports a tidier transition across the underside of the trailer. For hobby workbench planning, the stated 190 mm width provides a clear reference when matching the part to the proportions of a chosen build. The part fits especially well into workshop sessions focused on scale realism, where underbody components matter as much as the deck or side panels. On a finished flatbed model, it adds visible structure to the rear area and strengthens the overall impression of a carefully specified transport trailer.
Basic accessories
1:14 Frame Cover Panels 2-Axle Accessory
500907180€84.99
Frame cover panels bring a more complete scale look to the rear section of a 1:14 truck build. This 2-axle accessory is shaped for the chassis area behind the cab, where the frame, deck and coupling zone meet and remain clearly visible on many model truck layouts. Used in this exposed section, the panels help define the transition between the rear fenders, the fifth-wheel area and the surrounding chassis structure. That makes them a focused upgrade for model-building enthusiasts who want the mechanical layout to read with more visual order in parked display scenes and during driving sessions. The 1:14 scale keeps the detailing aligned with truck builds in this format, while the 2-axle specification keeps the application tied to the correct chassis configuration. The set works especially well on projects where the rear platform and coupling section are part of the visual character of the model. Combined with a tractor unit and trailer setup, the covered frame area supports a more finished appearance around the back end without changing the core layout of the truck. Age 14 years+
Basic accessories
1:14 Frame Cover Panels 3-Axle, model accessory
500907255€92.99
A 3-axle truck chassis gains a more finished scale look with these 1:14 Frame Cover Panels, shaped to dress the rear platform area with a metal checker-plate surface. The silver panel form brings the visual language of full-size truck catwalks into a model build, adding a technical detail that stands out around the fifth-wheel section and mudguard area. The panel is formed as a flat metal part with an irregular stepped outline, multiple round fixing holes and several cut sections that indicate its mounting role within a larger chassis assembly. That layout supports integration into detailed truck projects where the frame area is part of the overall visual impact, not just a structural base. The checker-plate pattern adds texture across the surface, giving the rear section a more authentic workshop and transport-truck character. In display builds, the metallic finish catches light differently from painted cab parts and helps break up large chassis surfaces with a functional, mechanical accent. This accessory suits hobby bench upgrades, custom 3-axle conversions and scale truck projects that focus on realistic rear-deck detailing. Combined with a tractor unit body, wheel arches and coupling area, the panel helps create a more complete heavy-haul look for static presentation or RC truck builds. Suitable for ages 14 years and up.
Basic accessories
1:14 Front Knuckle Arms, model accessory
500530913€37.99
In 1:14 truck building, the front end hardware shapes how the axle assembly comes together. These alloy front knuckle arms are made for Tamiya 1:14 models and supply 2 matched components for the left and right side of the steering layout. Each arm uses a machined metal construction with a silver finish and a mirrored form, so the pair corresponds to both sides of the front assembly. The cross-shaped body carries threaded mounting holes that support screw-based installation, while the protruding axle section provides the mounting point for the wheel hardware. This makes the set relevant both for repair work on worn front end parts and for planned rebuilds where the steering area is being refreshed with metal components. The compact format also suits parts storage in a workshop drawer or field box. During a rebuild, the pair can be fitted as part of a front axle service, or kept ready as replacement hardware for maintenance between driving sessions. The 2-piece set gives model-building enthusiasts a focused chassis component for keeping a 1:14 Tamiya truck ready for the next run.
Tyres & rims
1:14 Fulda Crossforce, off-road tires, 2-pack
500907011€26.49
Loose dirt, uneven ground and rutted tracks call for a tire that can keep a model connected to the surface. The 1:14 Fulda Crossforce off-road tires are built for that role, with a terrain-focused design and flexible pneumatic construction that supports strong traction where hard-packed road rubber reaches its limit. This 2-piece set is intended for 1:14 models and is compatible with original Tamiya rims, so it fits naturally into repair work, rebuilds and running setup changes on matching vehicles. The flexible structure allows the tire to work with the ground rather than skimming across it, which helps the contact patch stay active over irregular terrain. That makes this set a useful choice when a model spends most of its time away from smooth surfaces and needs a tire shape aimed at off-road running rather than general road use. Whether the goal is replacing worn rubber before the next session or preparing a compatible chassis for rougher terrain, this pair adds a focused wheel setup for dirt routes and mixed ground. Age 14+
Tyres & rims
1:14 Fulda EcoControl Tire, truck tyre set
500907014€26.49
The Fulda EcoControl Tire set brings full-size road-haulage character into 1:14 truck modelling with 2 drive-axle tyres shaped after the original Fulda road pattern. Sidewall lettering and the road-style tread give tractor units a more authentic EU look, whether the build is being refreshed or finished from scratch. Each tyre measures 80 mm in outer diameter, 40 mm in inner diameter and 19 mm in width, creating proportions that suit scale truck running gear without guesswork. The 1 mm profile depth keeps the road-tread look crisp and restrained, matching the appearance expected from highway-focused tractor units rather than off-road machinery. As a dedicated drive-axle version, this set is aimed at the rear axle area where matching tyre style has a strong effect on the finished truck's overall stance. Compatibility with all TAMIYA tractor units and TAMYIA and CARSON trailers opens up several workshop uses, from replacing worn tyres to aligning a tractor and trailer combination with the same road-going visual theme. In a parked display, the Fulda markings sharpen the scale impression; on a running model, the tyre dimensions support a clean, realistic look across the axle set.
Tyres & rims
1:14 Fulda Multitonn, tire set, wide 2-pack
500907012€26.49
Heavy road transport styling carries straight into this 1:14 Fulda Multitonn tire set, built as a wide 2-piece replacement for model truck running gear. The flexible rubber construction combines a realistic road pattern with a contact surface shaped for traction and extended running life, giving workshop projects a functional spare for regular use. The set is intended for specific Carson-compatible wheel positions rather than as a universal fit. It suits the front axle rim 907013 and also fits the trailer rim 907026, which makes the pair useful when a truck build needs a direct replacement on the steering axle or a matching change on trailer wheels. The tread uses narrow longitudinal grooves and ribbed sections that visually suit road-going commercial vehicle models while supporting controlled rolling on smooth hobby surfaces. With 2 tires in the pack, the set covers one axle pair and keeps maintenance planning straightforward for larger articulated combinations. In the workshop, the pair suits rebuilds, wear replacement and detail-focused upgrades on 1:14 truck projects. Age marking: 14 years. For hobbyists maintaining a hauler, trailer or display-ready road rig, this set adds a scale-correct running component with defined fitment for compatible rims.
Basic accessories
1:14 Goldhofer/SAF Low Loader Axle, trailer axle
500907140€76.99
Heavy haul trailers depend on a convincing undercarriage, and this 1:14 Low Loader Axle Goldhofer/SAF brings that technical character into a scale build. The set is designed as a model assembly for trailer projects and centres on the axle and suspension area that defines the stance and mechanical look of a low loader. The layout shown in the set includes a straight axle, suspension bellows, trailing arms and multiple mounting parts that shape the underbody structure in a way that reads clearly on a finished model. Silver-toned metal elements sit alongside black moulded components, creating the visual contrast typical of working trailer hardware. Additional brackets, clamps, bushings and threaded pins expand the assembly beyond a single cross member and give the build more depth around the wheel and mounting zone. The included fasteners support a clean mechanical fit and suit hobby work that values visible construction detail. On a completed 1:14 transport trailer, the axle section adds substance to workshop scenes, display setups and road-going truck combinations. Age 14 Years. The set also suits enthusiasts who want to refine a trailer project with a component group that is usually seen close up, where suspension parts and mounting geometry make a clear difference to the final impression.
Basic accessories
1:14 John, driver figure, painted model
500907426€24.99
A seated driver figure can change the whole impression of a scale scene, and John brings that effect into 1:14 layouts with a painted finish and a relaxed, ready-to-place pose. Bent arms, open hands and a natural seated posture give the figure a convincing presence in cabins, workshop corners or diorama settings where an empty seat would otherwise break the illusion. The 1:14 scale makes John a useful addition for model builders working on trucks, construction vehicles or display scenes that need a human reference point. The blue long-sleeve work shirt with light cuffs, dark trousers and black shoes create a practical everyday look rather than a costume-like appearance, which helps the figure sit comfortably across many different scene styles. Short black hair and a neutral facial expression keep the character flexible for varied settings. The painted surface also saves finishing work and allows the figure to move straight into a build or display. Placed in a cab, on a bench or beside a workshop setup, John helps a model scene feel inhabited and proportionally grounded. For enthusiasts refining a vehicle interior or building a full diorama, this figure adds a clear visual link between machine, setting and scale. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 King Pin Steel, model accessory, Tamiya
500907362€7.99
In 1:14 scale truck building, the small fastening points often decide how cleanly a front-end assembly comes together. The King Pin Steel set is made for Tamiya-fit 1:14 applications and brings together the metal hardware needed for one king pin mounting point in a compact replacement or workshop part. The visible components are a long countersunk threaded screw, a flanged spacer with recessed centre and a matching hex nut. That combination supports a flush screw seat at the mounting surface while the spacer sets the part position and the nut secures the connection. Steel construction gives this hardware the material character expected for mechanical model assemblies, especially where steering or axle-related parts rely on accurate fit between fasteners and mounting holes. As a model accessory rather than a complete vehicle, it adds a focused solution for repair benches, spare-parts storage and ongoing scale truck projects. Whether used to replace worn hardware or to complete a fresh 1:14 build, this set fits naturally into detail-oriented assembly work. The compact format also makes it practical to keep on hand with workshop supplies for regular maintenance on Tamiya-fit truck models.
Electronics
1:14 LED Flashing Light, accessory, orange
500907580€58.99
A rotating beacon is one of the details that gives a 1:14 scale working vehicle its finished road-going character, and this orange LED Flashing Light brings that look into a compact accessory format. The light unit is designed for 1:14 models and combines a swivelling effect with programmable operation, making it a strong visual addition on truck cabs, municipal builds or service conversions. The programming options go beyond a single light pattern. Programs 1 to 6 cover rotation to the left or right at 40 ms, 70 ms and 200 ms, while programs 7 to 13 provide different flash modes. The polarity is defined in the leaflet with orange as positive and black as negative, giving a clear basis for installation. The mounting diagram specifies a 4.5 mm hole, and the included fitting parts are shown compensating for roof pitch so the beacon can be aligned on sloped roof sections. For operation above 9.6 V, the leaflet states that a resistor must be soldered into the positive cable. On a scale truck, recovery vehicle or site support build, the beacon adds a functional light signature that changes the whole roofline once fitted. Age 14 years+ is stated in the product data, making this accessory suitable for hobby-focused model setups and detailed custom projects.
Electronics
1:14 LED Flashing Light, model accessory
500907579€53.99
This 1:14 LED flashing light set brings a compact lighting detail to compatible scale model projects with an orange upright design and wired connection parts. The assembly combines a small plug element with metal contact pins and attached leads, giving model builders a clear electrical component for installation into a larger vehicle setup. The included parts are arranged as a dedicated accessory for fitting, replacement or restoration work rather than as a standalone model. A yellow sprue frame holds the molded upright components, while the separate connector section provides the contact point for integration into the existing electronics of a compatible 1:14 build. The orange warning-light style makes the fitted result stand out clearly on service, utility or transport-themed model scenes where visible signal details shape the overall look. On the workbench, this accessory suits projects that need a defined upright beacon element or a fresh replacement for worn lighting parts. In a finished scale vehicle, the compact format supports neat installation without overwhelming the proportions of a 1:14 model. Age 14 Years.
Electronics
1:14 LED-PCB MAN Headlight, model accessory
500907391€70.99
Truck lighting is one of the details that gives a 1:14 scale build its finished road-going character, and this 7.2 V LED-PCB MAN Headlight set focuses that effect on the front end. The set consists of 2 mirrored circuit boards with mounted LEDs, long twisted wire harnesses and separate outer lamp leads, forming a matched left and right arrangement for compatible MAN model projects. The PCB layout carries several light components in different sizes, with copper traces and pre-mounted electronics that concentrate the headlight functions on compact boards. The wired design supports installation within a model body while keeping the light points positioned at the front where the headlight units belong. As an accessory in the Models & Accessories range, it fits naturally into detail work, repairs or lighting upgrades where electronic components are part of the visible build substance. In a workshop setting, the paired boards suit a truck build that needs a defined front lighting layout rather than a generic light source. On a finished shelf model or a running RC truck, the left-right board set and separate lamp leads help create a more complete MAN front-end appearance.
Electronics
1:14 LED-PCB Taillight, model accessory, 7.2V
500907385€57.99
Rear lighting is one of the details that gives a scale truck build its finished road-going character, and this 1:14 LED-PCB taillight brings that function into a compact electronic module. The board is specified for 7.2V systems and uses a 6-section taillight layout that suits model projects where the rear end needs a defined light signature rather than a plain single-lamp look. The set shown in the product data consists of 2 green printed circuit boards, each fitted with attached multicolour cables for connection work inside the model. Visible solder pads and printed traces point to a purpose-built lighting component rather than a decorative shell part, making it relevant for repair benches, replacement jobs and detailed custom builds. The rectangular PCB format with mounting holes near the ends supports practical installation on compatible model applications where a fixed rear light board is needed. In a workshop context, this kind of part fits ongoing maintenance just as well as a fresh scale project. It can be used when an existing rear light module needs replacement or when a 1:14 vehicle is being equipped with a more defined taillight arrangement based on a 7.2V electrical setup.
Basic accessories
1:14 Lifted-Suspension Kit, model accessory
500907618€42.99
The 1:14 Lifted-Suspension Kit +8 mm 3A.T.T adds a clear chassis conversion to a 1:14 model setup, shifting the vehicle profile upward with a measured +8 mm lift. Silver metal plates, connector straps and spacers give the assembly a technical workshop look that suits scale truck projects with visible hardware details. The set is built around 2 large trapezoid side plates with multiple drilled holes, 4 narrow connector straps, 2 square reinforcement plates, 4 cylindrical threaded spacers, 4 black screws and 4 hex nuts. This combination creates a defined mounting structure rather than a cosmetic add-on, with each hardware group serving the suspension conversion itself. The drilled hole pattern supports attachment at fixed points, while the spacers establish the added height within the assembly. The metal parts also bring a crisp mechanical finish that matches the functional character of a lift modification. On a display shelf or within an active 3A.T.T build, the +8 mm conversion changes the visual stance and opens up new scope for detail-focused custom work. The age marking of 14 years and up places the kit in the hobby field, where model builders can combine scale presence and hands-on mechanical assembly in one focused upgrade.
Basic accessories
1:14 Lifted-Suspension Kit, model accessory
500907452€34.99
A raised chassis setup can change how a scale truck sits and moves on the course, and this 1:14 Lifted-Suspension Kit brings that change into a compact tuning upgrade. The conversion is made for compatible 2A.T.T model applications and adds 8 mm of lift, giving the suspension geometry a visibly taller stance. The set includes a large slotted metal plate, 2 square metal plates, 2 curved connector plates, 4 long screws, 4 threaded fittings, 4 short screws and matching hex nuts. The elongated cutouts in the main plate allow the mounting position to be aligned during installation, while the threaded fittings and paired hardware create the connection points needed for the lifted setup. As a model accessory, this is a workshop-focused add-on rather than a ready-to-run vehicle. Batteries are not included. On shelf tracks, diorama builds or running areas with uneven transitions, the extra 8 mm can help a compatible 1:14 chassis clear edges and surface changes with a taller suspension layout. The hardware-based conversion also suits rebuilds, maintenance sessions and tuning projects where ride height is part of the setup. Warning! Not suitable for children under 14 years.
Electronics
1:14 Light Case Clear, model accessory, universal
500907256€26.49
Lighting details shape the character of a scale vehicle, and this 1:14 Light Case Clear set adds that crisp lamp finish with 2 transparent lens units in a universal format. The clear design suits model-building enthusiasts who want to refine a body shell, replace worn light parts or prepare a custom lighting layout on a 1:14 project. The set is intended for models and accessories work rather than as a complete vehicle system, making it a practical choice for workshop stock, rebuilds and visual upgrades. The universal specification supports use across different 1:14 applications where the chosen build calls for clear lamp covers. In body conversion work, transparent light cases help preserve the defined shape of the lamp area while leaving the final installation concept open to the builder. That makes the set useful both for fresh custom projects and for restoring scale details on an existing model. On a truck build, a service vehicle conversion or another 1:14 scale scene, the 2 matching light cases create a consistent look across the front or rear lamp positions. The compact accessory format fits naturally into hobby bench routines where replacement parts, finishing details and scale accuracy all matter.
Tyres & rims
1:14 Lowloader Tire-set, model accessory, 4 pcs
500907583€26.49
A lowloader only looks complete when the running gear matches the rest of the build, and this 1:14 tyre set supplies 4 replacement tyres for that exact task. The black rubber finish and fine block-pattern tread give the wheel area a technical, road-going character that suits detailed transport and trailer models. Each tyre is shaped as a dedicated accessory for 1:14 lowloader applications, making the set a practical choice for maintenance, restoration or visual refresh work on an existing model. The tread blocks create a defined outer surface rather than a plain slick look, which helps preserve the scale impression around the axles and mudguard area. With 4 tyres in the pack, the set covers a complete grouped wheel change where matching appearance matters across the vehicle. The smooth sidewalls keep the profile clean and focused on the tread pattern. On the workbench, the set fits naturally into spare-parts storage for ongoing model upkeep. During a rebuild or detail update, the 1:14 format keeps the tyre choice aligned with the scale of the lowloader, while the rubber material supports the realistic look expected in a transport model setup. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 M-B Arcos, top light holder accessory
500907599€71.99
Truck styling details often define the whole character of a scale build, and this 1:14 top light holder is shaped for an M-B Arcos project where roof lighting needs a dedicated mounting point. As a model supplies accessory, it adds a specific fitting instead of relying on a universal improvised bracket. The 1:14 scale keeps the part aligned with matching truck dimensions, while the M-B Arcos designation makes its intended application clear for builders working on that subject. Used on the upper cab area, the holder supports a more resolved lighting layout and a cleaner visual transition between the roof section and added lamps. That makes it useful in builds where the finishing stage matters as much as the running gear. The part can also help keep the light position consistent across a detailed truck body where symmetry and placement affect the final appearance. In a workshop setting, this accessory fits naturally into a body detailing session focused on truck customisation. It also suits display-oriented builds where roof lighting is part of the chosen look, giving the cab a more purposeful scale-truck presence. Age 14 years+ Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Mainplate Batt Hold, RC accessory, aluminum
500907593€69.99
This 1:14 aluminum mainplate and battery holder is made for 2 axle and 3 axle RC truck builds, adding a defined chassis section for battery installation in detailed scale projects. The aluminum construction brings a precise, technical look that fits naturally into workshop-focused model building and truck conversions. As an 8-part accessory set, it supports a structured fitting process around the frame area rather than acting as a generic add-on. The mainplate forms the base for the battery holder, creating a dedicated position within the chassis where the drive battery can be mounted as part of the build layout. That makes it useful for model builders working on scale truck configurations where component placement, access and overall frame organisation matter during setup. The 1:14 scale format keeps the set aligned with matching truck dimensions, while the 2 axle and 3 axle compatibility broadens its use across different chassis concepts in the same scale class. On the bench, this accessory suits rebuilds, upgrades and fresh assemblies where the battery area needs a more defined structure. In running models, a clearly integrated battery position supports a neater overall chassis arrangement and a more purposeful technical finish.
Electronics
1:14 MAN Taillight, LED PCB, model accessory
500907389€35.99
Rear lighting is one of the details that gives a scale truck its finished road-going character, and this 1:14 MAN taillight set brings that detail into the build with a 7.2 V LED-PCB layout. The set is designed as a dedicated model accessory for 1:14 applications and focuses on the rear section where lighting shape and placement matter most. Each taillight unit uses a narrow printed circuit board format with pre-attached wires for electrical connection inside the model. The paired board design suits left and right installation, while visible mounting holes support secure positioning in the rear body area. Contact points and compact board dimensions make the set suitable for integration where space is limited and clean routing matters. As a replacement part or upgrade component, the taillight boards add a more complete technical finish to truck projects based on a MAN subject. The set fits naturally into workshop tasks such as restoring rear lighting, refining a scale build or replacing worn electrical parts in an existing 1:14 truck. In display use, the taillight layout strengthens the realistic rear view; in running use, it completes the model with the lighting detail expected on a road truck build.
Basic accessories
1:14 MAN TGX XLX, light holder, brass accessory
500907095€89.99
The MAN TGX series is a familiar sight in modern long-haul transport, and this 1:14 top light holder brings that road-truck character into a scale build with a compact metal detail. Designed for the MAN TGX XLX, the accessory combines a shaped bar with 4 polished lamps to create a more defined front-end look on a truck model. The part is made from brass and finished with nickel plating, giving the surface a bright metallic appearance that suits display-focused builds as well as running models. Each lamp can be illuminated, so the holder adds more than a visual accent when integrated into a lighting setup. The bar mounts individually on the frame, which keeps the placement clear and preserves the clean outline of the truck body. In a 1:14 project, details such as auxiliary lighting and metal trim help separate a standard build from a more personalised rig. On a workshop bench, the holder adds a focused upgrade during a custom build or refresh. In a finished truck scene, the polished lamp bar strengthens the scale look of the MAN TGX XLX whether the model is parked for display or prepared for the next driving session.
Basic accessories
1:14 MAN TGX XLX, light holder, rear frame
500907124€46.99
The MAN TGX series is a familiar sight in modern long-haul transport, and this 1:14 light holder brings that working-truck character onto the rear section of a scale cab. Designed for the MAN TGX XLX, the set adds a dedicated rear mounting point for auxiliary lighting and sharpens the technical look behind the driver's cab. The holder is made from brass with a nickel-plated surface, combining a precise metal frame with a bright finish that suits detailed truck builds. It can also be used as a holding frame on the cab rear panel, where the 2 chromium worklights create a clear, workshop-style lighting arrangement. Each lamp includes 2 clear lenses and 2 blue lenses, opening different styling directions for the rear section without changing the basic mounting concept. The lamp units are prepared for refitting with bulbs or LEDs, which makes the set suitable for builders planning a functional lighting conversion as part of a larger 1:14 truck project. On a shelf, in a workshop-themed diorama, or as part of an RC truck build, the frame adds visible structure to the rear wall of the cab. Age 14+
Basic accessories
1:14 MB Actros Gigasp. Top Light Holder
500907134€96.99
The Mercedes-Benz Actros is one of the defining long-haul truck families on European roads, and the Gigaspace cab is known for its tall roof profile and distinctive upper section. This 1:14 MB Actros Gigasp. Top Light Holder translates that roofline detail into a dedicated scale accessory for truck modelling projects. Named as a top light holder and matched to the 1:14 scale, this part is shaped for MB Actros Gigasp. builds where the cab silhouette and roof equipment matter to the finished appearance. Rather than using a generic fitting, the model-specific designation keeps the accessory tied to the Actros Gigasp. form named in the data. Within a truck build, the upper cab area draws the eye quickly, so a dedicated holder helps define that section with a clearer, more intentional layout. The compact accessory format also makes it a focused addition for builders refining an existing model or planning a more detailed new project. On the bench, this kind of scale part suits cab customisation, restoration of a truck model, or completion of a subject-specific exterior setup. In a display line-up or during running sessions, the roof section gains a more resolved look that fits the 1:14 truck format and the MB Actros Gigasp. designation.
Basic accessories
1:14 MB Arocs Fuel Tank Mount, model accessory
500907584€18.99
The Mercedes-Benz Arocs is a familiar sight in heavy-duty transport, known for its angular cab design and work-focused road presence. This 1:14 aluminium fuel tank mount set brings that truck-specific detail into a model build with 2 dedicated mounting parts for the MB Arocs. The set is designed as a model accessory rather than a universal bracket pack, focusing on the fuel tank area of a 1:14 truck project. Aluminium construction gives the parts the crisp, technical look that suits scale commercial vehicle detailing, while the shaped brackets and fastening hardware support a clean integration with the matching layout. The 2-piece mount format concentrates on one defined installation point, which helps keep the build visually consistent with the Arocs theme. As an add-on for model supplies, it fits naturally into detail work where vehicle-specific hardware matters as much as the larger body components. On the bench, this set supports focused assembly sessions that add another layer of realism to a truck chassis. In a finished display or running model, the fuel tank mounting area gains the kind of functional-looking structure that strengthens the overall scale impression. Recommended age: 14 years +
Basic accessories
1:14 MB Arocs/Actros 3A, frame cover, accessory
500907598€63.99
Heavy-duty road trucks such as the Mercedes-Benz Arocs and Actros are defined by their exposed chassis sections as much as by the cab itself. This 1:14 frame cover is made for MB Arocs and Actros 3A model builds and adds a dedicated detail to that visible structural area. Used on the frame section, the cover helps complete the look of the truck around the rear chassis and supports a tidier transition between surrounding components. The 1:14 scale keeps the part in step with truck modelling projects built to that format, which matters when visible proportions and fitted details shape the overall impression. As a model accessory rather than a full vehicle, it focuses on one specific area of the build and gives that section a more resolved appearance. The designation names MB Arocs and Actros 3A directly, so the part is aimed at those corresponding model applications. The frame cover fits naturally into upgrade work, restoration of an existing truck model or a fresh custom build where the chassis area is meant to carry more visual depth. Age marking: 14 years.
Electronics
1:14 MB Headlight, LED PCB, model accessory
500907558€70.99
A 1:14 scale model gains a more defined front end with the MB Headlight LED-PCB set, built around 2 mirrored circuit board modules for 7.2 V lighting. The paired layout, compact green boards and attached LED elements give hobby projects a dedicated electronic headlight solution rather than a cosmetic body detail. Each side uses its own PCB module, creating a left-right arrangement that suits scale vehicle builds with separate front light positions. The boards carry mounted electronic components and pre-fitted wire leads in several colours, which helps keep polarity and routing distinguishable during installation. The 7.2 V specification anchors the set to model electrics that match this voltage, while the compact format leaves room for integration inside a detailed body or chassis area. As an accessory rather than a complete vehicle, the focus stays on functional lighting hardware for upgrades, repairs or project-specific conversions. In workshop use, the set fits naturally into custom 1:14 builds where front lighting is part of the finished look and electrical layout. It also suits replacement work on existing models that need matched headlight electronics on both sides.
Electronics
1:14 MB Side-marker LED Set, model accessory
500907560€17.99
Side-marker lights are a small detail with a big effect on a finished truck build, and this 1:14 MB Side-marker LED Set brings that scale look into compatible model projects with 2 light units for 7.2 V and 12 V setups. The compact lighting format and ready-made wiring make it a focused addition for builders refining exterior details on a model rather than changing its core mechanics. The set belongs to the models and accessories range and is intended as a lighting add-on for 1:14 scale applications. Long red and black leads are already attached, with small plugs and connector ends that support integration with existing model electronics. Black heat-shrink sections cover the wire junctions, helping keep the cable runs neat inside the bodywork or along the chassis. Because the set is built around side-marker lighting, it adds a realistic visual accent at the flanks of a truck body where illuminated details shape the finished appearance. On a workshop bench, the wiring can be planned as part of a custom truck build or a lighting upgrade on an existing 1:14 model. In a display setting, the illuminated side markers strengthen the road-going character of the vehicle, while on running models they extend the visual detail beyond the main headlight and rear light areas.
Electronics
1:14 MB Taillight, LED PCB, model accessory
500907556€35.99
This 1:14 LED PCB taillight assembly is built for model projects that call for a clear rear lighting setup and a compact electronic format. With a 7.2 V specification and MB taillight designation, the unit suits enthusiasts looking to refine a compatible build with dedicated illuminated detail. The set uses 2 small circuit boards rather than a single large light bar, which helps distribute the lighting elements across the rear section of a model. Attached multicolour wire leads support connection within the vehicle layout and give the assembly the character of a purpose-made lighting component rather than a decorative add-on. The PCB construction keeps the electronic paths defined on each board, while the pre-mounted light elements concentrate the function into a small installation footprint. In workshop use, the taillight assembly fits naturally into restoration jobs, spare-part replacement, or scale-focused customisation where rear light detail shapes the finished look. Age marking: 14 years and up. For model builders, it adds an electronic lighting element that can help a compatible vehicle body read more convincingly once installed.
Basic accessories
1:14 Mounting Set Front Drive Axle, model part
500907280€75.99
A driven front axle changes both the look and the mechanical character of a 1:14 model, and this mounting set is made to support that conversion with dedicated installation parts. The set is specified for a 1:14 front drive axle and centres on the hardware needed to mount the axle assembly into the chassis layout. Visible components include 2 assembled leaf spring units, 2 angled metal brackets with slotted and round mounting holes, 2 cylindrical pins or spacers, 1 ball stud or post, 1 hex nut and 1 threaded rod. The instruction material also references 3 x 30 mm screws with 3 mm nuts and 3 x 8 mm screws with 3.2 mm washers and 3 mm nuts for the fastening steps around the axle and bracket structure. Slotted bracket holes allow the mounting points to be positioned during installation, while the spring packs create the suspension-style connection between axle and frame parts. The assembly drawings show the bars fixed across the axle housing and the mounted unit secured to the chassis base. In a workshop-style build, these parts support a front axle installation that looks mechanically convincing and matches the detailed character expected in 1:14 truck and construction models. The set suits hobbyists from 14 years who enjoy working through axle, bracket and linkage assembly with scale-focused hardware.
Basic accessories
1:14 Mud Guard-Set, trailer accessory
500907068€21.49
Built for semitrailer projects in 1:14 and 1:16 scale, the Mud Guard-Set brings a clear bodywork detail to dump trailer layouts. The 4-piece set is intended for wheel-area coverage and gives compatible trailer builds a more complete outer line around the axle section. Each mud guard measures 76 x 35 mm, which helps when checking the available space on a trailer chassis before installation. The parts are suited to dump trailer applications, where the wheel arch area benefits from defined coverage that matches the rest of the body structure. As an accessory for model-building enthusiasts, the set supports repair work, replacement of existing guards, or the finishing of a fresh semitrailer build with matching parts across several wheel positions. In workshop use, the set fits naturally into scale trailer projects that need consistent detailing around the running gear. It also suits rebuilds where worn or missing guards would interrupt the overall line of the semitrailer, restoring a cleaner and more coherent appearance.
Basic accessories
1:14 Pallet with Wuerth-Packings Accessory
500907620€23.99
This 1:14 pallet with Wuerth-Packings brings the look of a prepared freight shipment into model logistics scenes. Stacked cartons, a euro pallet base, clear wrap and red straps combine into a compact accessory that reads instantly as warehouse cargo, whether placed beside a truck, on a loading dock or in a depot display. The printed Wuerth markings on the boxes give the load a distinct commercial character, while the visible EUR and DB pallet details echo the appearance of real transport units. The layered carton arrangement creates height and structure without needing extra loose parts, making the accessory easy to position in workshop, storage or delivery settings. At 1:14 scale, it fits naturally into layouts built around model trucks and freight environments, where cargo details help define the scene rather than leaving open space around the vehicle. Used on a trailer bed, next to a forklift area or as part of a warehouse corner, the pallet load adds a clear transport context to static displays and driving layouts alike. Age 14 Years
Basic accessories
1:14 Rear Axle, axle assembly, diff lock
500907268€199.99
A driven rear axle is one of the defining mechanical elements in a scale truck build, and this 1:14 assembly brings that focus straight to the chassis with a differential lock and fixed drive. The compact axle layout adds a technical, workshop-style presence to model truck projects while supporting a more purposeful drivetrain setup. The axle is designed for TAMIYA trucks or vehicles with 62 mm frame width, giving the build a clearly defined compatibility point. Inside the housing, the assembly uses gears, bearings and shims, with instruction steps showing bearing sizes such as 9 x 5 x 3 mm and 11 x 5 x 4 mm as part of the internal layout. Separate shaft and cover options are provided for axle setups with or without through-drive, so the drivetrain configuration can follow the chosen chassis concept. Set screws, spacers and the enclosed gear housing all contribute to a model component that rewards careful mechanical assembly rather than hiding the engineering. In a scale truck project, the axle suits fresh builds, drivetrain conversions or the replacement of an existing rear unit. Combined with a matching frame layout, it supports a detailed underbody look and a more technical build process that will appeal to hobbyists working on 1:14 commercial vehicle models.
Basic accessories
1:14 Rear Bumper Euro, semi-trailer accessory
500907074€79.99
A rear underrun bar is one of the details that defines the look of a European road trailer, and this 1:14 Rear Bumper Euro brings that character to a semi-trailer build with a compact metal assembly and clearly structured mounting hardware. The layout combines a wide upper bar, a lower beam and a central support section for a realistic rear-end finish on compatible trailer projects. The assembly is intended for Tamiya stanchion telescope, container and flatbed trailers, where the Euro-style form suits scale truck modelling with a more specific regional trailer appearance. The central angled plate carries 4 circular holes, while the top flange adds elongated slots and round fixing points for attachment. A black central bracket sits on the crossbar, with additional fastening blocks visible on the bar itself, giving the part a technical, workshop-style look that matches detailed trailer builds. Red light-style elements at the outer ends complete the rear view and help the bumper read as a full rear assembly rather than a plain cross member. In a workshop setup, the part fits naturally into a trailer detailing project focused on rear structure and scale realism. Combined with a container, flatbed or stanchion trailer body, it adds a more finished road-going appearance to the model's tail section. Age 14 Years
Basic accessories
1:14 Rear Bumper, trailer accessory, Euro
500907075€89.99
Refrigerated road trailers are defined by the details at the rear, where doors, locking bars and bumper hardware create the unmistakable working-truck look. This 1:14 Rear Bumper for the Euro T-Reefer Semi-Tr. adds that characteristic finishing section to the back of the model with a metal construction and a clearly technical layout. The assembly is designed as a dedicated trailer accessory for 1:14 scale use and focuses on the lower rear area of the refrigerated semi-trailer. Red rear light units sit at the outer ends of the horizontal bar, while a central bracket and an upright mounting frame shape the structure in the middle. The visible fasteners and clamp-style mounting blocks reinforce the workshop-style appearance that suits detailed truck modelling. In combination with the rear door area, hinge detailing and locking hardware of the trailer body, the bumper section helps complete the proportions and visual balance of the model's tail. On a built semi-trailer, this accessory strengthens the realism of loading-bay scenes, road-train displays and scale transport line-ups. Age marking: 14 Years.
Basic accessories
1:14 Reduction Gear Unit 4:1, truck accessory
500013517€48.99
A 4:1 intermediate gearbox brings a different character to a 1:14 truck drivetrain by shifting the balance toward higher torque. This Reduction Gear Unit is built for model truck projects where stronger pulling power matters more than outright output speed, and the compact layout suits detailed chassis installations. The housing is described as light, while the internal drive uses ball-raced metal pinion gears. That combination focuses on controlled power transfer through the gearbox itself rather than on cosmetic add-ons. The unit is specified for all Tamiya trucks except Globe Liner 56304, which gives experienced builders a clear compatibility frame for workshop planning. As an accessory part rather than a complete running set, it is intended to work within an existing truck build and changes the drive behaviour through its stated reduction ratio. A corresponding universal shaft kit is required separately for use, so the gearbox belongs in planned conversion work or a fresh 1:14 truck setup with matching drivetrain parts. Age marking: 14 Years.
Basic accessories
1:14 Robert, driver figure, painted accessory
500907186€9.99
Robert brings a clear driver role into 1:14 model scenes with a seated pose that suits cabins, cockpits and other interior setups. The painted figure combines a black cap, white long-sleeve shirt, dark bib overalls and black boots, creating a workshop and transport look that reads cleanly inside utility vehicles and layout displays. The bent legs allow placement in seated positions, while the closed hands support convincing operator staging at steering wheels, control levers or dashboard areas where a standing figure would not fit. Painted face and hands complete the character without further finishing work, so the figure can move straight into a diorama, a truck cab or a machine interior. The male worker styling fits naturally into industrial, agricultural and transport themes where a visible driver helps define the function of the vehicle in the scene. In a model workshop display, Robert can occupy a parked cab and give the build a ready-for-duty look. In a moving vehicle scene or a static diorama, the 1:14 scale helps the figure sit in proportion with matching models and adds a more believable sense of operation.
Electronics
1:14 Roof Lamp PCB, model accessory, 7.2V
500907184€14.49
Roof lighting is a defining detail on many scale truck builds, and this 1:14 roof lamp set adds that electronic accent in a compact 7.2V format. The set includes 2 matching round PCBs, each fitted with an SMD LED and attached wires, making it a dedicated lighting accessory for model projects rather than a complete vehicle unit. The small board layout keeps the focus on the lighting function itself, with each module combining the LED element and PCB structure in one compact part. That format suits hobby builds where visible scale details matter and where wired components need to sit neatly within the model. The 1:14 scale reference makes this set relevant for matching scale projects, while the 7.2V specification defines the electrical setup the boards are designed for. With 2 lamp boards in the set, the lighting can be arranged as a balanced roof pair on a compatible build. In a workshop setting, the boards suit model upgrades, replacements, or fresh custom projects that call for roof-mounted lighting detail. The wired design also supports integration into existing electronic layouts where a separate lighting component is needed.
Electronics
1:14 Roof Lamp, model accessory, 12V SMD LED
500907399€14.49
Roof-mounted auxiliary lights are a familiar detail on working trucks, and this 1:14 roof lamp set brings that look into a scale build with a compact electronic format. The set includes 2 round lamp units, each built on an SMD LED PCB and designed for 12V operation, making it a focused addition for model builders refining a vehicle's upper bodywork. The small PCB-based construction keeps each light unit compact, while the wired layout supports direct integration into a custom lighting setup. In a 1:14 project, details placed high on the cab have a strong visual effect, and this pair gives that area a more technical, road-ready character. The 2-lamp format also suits symmetrical placement across the roof line, which helps preserve the balanced proportions expected in scale truck modelling. Minimum age: 14 years. Whether used in a fresh conversion or as part of an upgrade on an existing model, the lamp pair fits naturally into workshop-style builds where lighting details matter. Combined with other scale body features, the 12V SMD LED units add a precise finishing touch that reads clearly in close-up display views and during running sessions alike.
Basic accessories
1:14 SAF Coupler Plate, model accessory
500907378€46.99
In full-size trucking, the coupler plate is the working link between tractor and trailer. This 1:14 SAF Coupler Plate brings that technical detail into a scale build with a reinforced plastic main body and a mechanical layout shaped around mounted, moving parts. The assembly includes a central coupler housing, a rectangular frame, metal brackets, rods, springs, screws, nuts, washers and small fittings. Together these parts form a functional subassembly rather than a decorative surface detail, making it a strong choice for model truck projects that benefit from visible hardware and realistic chassis equipment. The reinforced plastic construction keeps the main component clearly defined, while the additional metal parts support the mounted structure and the linked movement of the mechanism. The spring elements and pivot points give the build a more technical character during assembly and once fitted to the model. On the bench, the set suits focused workshop sessions where mechanical details matter as much as the finished look. Installed on a compatible 1:14 truck model, the coupler plate adds an authentic commercial-vehicle feature that strengthens the scale impression of the chassis area.
Basic accessories
1:14 Scania R470/R620 Bumper Light Holder
500907065€82.99
The Scania R470 and R620 are known for their broad, upright front end, and this 1:14 bumper light holder brings that character into a scale truck build with a focused exterior detail. Made from brass with a nickel-plated, high-gloss polished finish, the holder adds a crisp metal accent to the front bumper area while matching the visual language of classic truck accessories. The part is designed for the fender and bumper area of 1:14 Scania R470 and R620 models and concentrates on one of the most visible zones of the cab. Its brass construction gives the assembly a defined formed shape, while the polished nickel-plated surface creates a reflective finish that works well with chrome-style trim and other front-end details. The lamp elements are injection-molded, separating the holder from the light units themselves in a way that suits scale detailing. Because the lamps can be lighted, the set also supports functional lighting concepts on custom truck projects where illuminated auxiliary lamps are part of the build. On a shelf, the holder frames the front view with a more purposeful truck look; on a running model, it strengthens the visual presence of the cab from head-on angles. Age 14+ marks the recommended age.
Basic accessories
1:14 Scania R470/R620 Top Light Holder
500907064€82.99
Classic Scania cab styling gains an extra scale detail with this 1:14 top light holder for the Scania R470 and R620. The accessory is made for model truck builds that benefit from a defined roof-mounted lighting position and a more finished cab line above the windscreen. The holder is made of brass and finished with nickel plating and a high-gloss polished surface, giving the assembly a bright metallic appearance that stands out cleanly against the cab. Its model-specific designation for the Scania R470/R620 keeps the look aligned with those named truck versions rather than using a generic roof bar. The lamp units are injection-molded, adding a distinct material contrast between the metal holder and the shaped light elements. Because the lamps can be lighted, the accessory also supports functional detailing as part of a broader truck lighting setup. On a workshop bench, this accessory suits detail-led upgrade projects where the roof area needs a sharper visual focal point. In a finished 1:14 display truck, the polished holder and lamp arrangement help complete the upper cab section with a scale look that fits road truck styling. Age 14+
Basic accessories
1:14 Seat with Mounting Bracket Accessory
500907359€8.49
A fitted seat can change the whole impression of a scale cabin, and this 1:14 Seat with mounting bracket brings that interior detail into model vehicle projects with a single combined assembly. The black component pairs the seat and bracket in one unit, giving 1:14 builds a defined driver position and a practical mounting base at the same time. The assembly is supplied as a seat with its bracket rather than as separate loose interior parts, which helps keep installation planning focused on one matching component. The product image shows a central round joint linking the connected sections, suggesting a pivoting or articulated connection within the assembly. That layout supports model projects where positioning, alignment or replacement of a cabin component matters as much as the visual finish. As an accessory in the Models Supplies range, it fits naturally into repair work, restoration tasks and custom model conversions. In workshop use, the component can serve as a replacement for a worn or missing cabin part or as an added interior element in a 1:14 conversion. The compact assembly also suits hobby benches where compatible scale details are selected piece by piece to complete a more convincing vehicle interior.
Basic accessories
1:14 Servo Mount, gearbox accessory
500907287€32.49
A 2-speed gearbox adds a distinct mechanical layer to a scale truck build, and this 1:14 servo mount is made to support that shifting setup with dedicated hardware. The set combines a mounting plate, linkage rod and fastening parts for integrating the servo connection into a compatible 1:14 chassis layout. The rectangular bracket uses screw mounting points and a central cutout to align the assembly on the vehicle frame, while the linkage rod connects the servo movement to the gearbox shift action. Assembly drawings in the supplied documentation show the bracket fixed to the chassis with washers and screws, with the linkage routed through the centre of the mounted section. That layout helps keep the shifting mechanism organised within the upper chassis area instead of relying on improvised mounting solutions. In workshop sessions, this accessory suits scale truck projects that use a 2-speed transmission and need the matching servo support parts. It fits naturally into drivetrain-focused builds where clean linkage routing and a defined mounting position matter as much as the finished driving function.
Electronics
1:14 SMD-LED White 7.2V, lighting set
500907396€9.99
This 1:14 lighting set brings white SMD-LED illumination to scale model projects that use a 7.2 V electrical setup. With 2 light units in the pack, it adds a compact lighting solution for builders working on vehicle detailing, replacement work, or custom electronics integration. The set is based around small SMD-LED components, making it suitable where a discreet light source is needed inside a model body or behind existing light positions. The product image shows a red-and-black two-wire cable prepared for connection and 2 blue axial resistors with metal leads, pointing to a layout intended for wiring into a model's electrical system. This makes the set relevant for hobby tasks that involve soldering, cable routing, and adapting lighting to a 1:14 build. In use, the 2 white LEDs can be installed as a pair for symmetrical lighting on the same vehicle or used to restore an existing light function on a scale model. The 1:14 format keeps the set aligned with matching model dimensions, while the 7.2 V specification gives a clear electrical reference for planning the installation within a workshop or hobby bench setup.
Basic accessories
1:14 Speed-up spindle drive shaft, spare part
500907611€40.99
A slim metal linkage part can make the difference between a model that sits idle and one that returns to its intended mechanical action. This 1:14 Speed-up spindle drive shaft is specified for reference 56545 and is shaped for use as a matching spare part within that setup. The component combines a smooth cylindrical shaft body with a threaded stud on one end and a rounded eyelet on the other. That layout points to a connection between fixed mounting hardware and an adjustable or screwed-in assembly point, while the brass-coloured collar at the transition adds another defined construction detail visible on the part itself. As a replacement component, it is aimed at keeping an existing model mechanically complete rather than changing its character or adding unrelated functions. The 1:14 scale note keeps the part tied to the intended model size, and the 56545 reference gives a concrete match point when selecting the correct spare. In workshop use, the shaft fits naturally into repair, maintenance or restoration tasks where a worn, bent or missing linkage needs to be exchanged for the proper part. The clearly formed eye mount and threaded end support straightforward identification during parts sorting and model servicing. Age marking: 14 years
Basic accessories
1:14 Steel Grab Handle, model accessory, 2-pack
500907374€14.49
On a low loader, the small fittings around the ramp do much of the visual work. This 1:14 Steel Grab Handle set supplies 2 matching parts for that area, giving model builders a dedicated accessory for low loader ramp detailing rather than a generic hardware substitute. Each piece follows a long, narrow form with a loop opening at one end and an eyelet at the other, a layout suited to linking points on the ramp assembly. The paired format supports left and right side installation where mirrored or matching components are needed. In a scale build, details of this size help keep the proportions of the trailer consistent, especially around moving or fixed ramp sections where attachment points stay visible. The set is aimed at model hobby work and fits naturally into repair, restoration or parts replacement tasks. Used during a rebuild or while refreshing an existing trailer, the 2 handles help return the low loader ramp to a complete, scale-focused appearance. The 1:14 format makes the set relevant for enthusiasts working on matching transport models and looking for the correct dedicated ramp component.
Basic accessories
1:14 Sticker Truck Ornamental Strip Decals
500907085€22.49
The 1:14 Sticker Truck Ornamental Strip decal sheet adds bold truck styling to model builds with translucent A4 decal foil and a broad mix of ornamental graphics. Long stripe elements, lettering and themed emblems give 1:14 truck bodies extra visual detail, whether the focus is a clean side profile, a decorated cab roof or a trailer panel with road-inspired markings. The sheet brings together several graphic directions in one format. Visible motifs include flame and stripe designs in black, grey, blue and red, plus stars, paw prints, eagle graphics, pirate-style faces, Route 66 shields and vertical LONG VEHICLE markings. Text decals such as ROADKING, HIGHWAY BANDIT and TRUCKER-style slogans widen the choice for custom layouts. Because the elements are pre-cut, individual sections can be arranged across doors, bumpers, side skirts or rear panels with more control than a single large graphic. This decal sheet suits workshop sessions focused on finishing and personalising a truck model after body assembly and paintwork. It also works for refreshing an existing 1:14 rig with new markings, adding contrast lines, themed badges or humorous message decals where a plain surface needs more presence.
Basic accessories
1:14 Sticker-Sheet Truck Caution-Signs
500907086€22.49
This 1:14 sticker sheet brings the visual language of European road freight to model trucks, trailers and tankers in a format made for detailed finishing work. The A4 sheet uses translucent self-adhesive foil, giving builders a broad selection of markings that can be placed across cab panels, trailer sides, rear doors or underride sections to sharpen the overall look of a scale build. Beyond general warning graphics, the sheet includes TIR plates, circular speed signs and oval country codes that suit international haulage themes. Orange hazard boards, dangerous goods placards and long reflective chevron strips open up more specific layouts for tanker, hazardous cargo or service vehicle subjects. Letter and number sets also support custom registration markings, fleet numbering and other small identification details that help a model look less generic and more like a working commercial vehicle. On a finished 1:14 truck, these decals can define the character of a long-distance tractor unit, an articulated trailer or a specialist transport rig. During a fresh build or a later refresh, the sheet adds another layer of scale realism through markings that full-size commercial vehicles carry every day.
Basic accessories
1:14 Susi Driver Figure, model accessory
500907427€24.99
A seated driver figure brings scale and character into a model scene, and Susi does it in a clear 1:14 format that fits neatly into miniature vehicle interiors. The painted finish, smiling expression and casual outfit create a recognisable cockpit presence that turns an empty seat into part of the display. Susi is shown with brown shoulder-length hair, a red long-sleeve top with light cuffs, blue trousers and dark red shoes. The bent knees and slightly forward arms are shaped for a sitting position, which makes the figure especially useful for cabs, driver compartments and other enclosed layouts where standing figures do not fit naturally. As a named character figure, this accessory adds more than scale reference alone; it gives a vehicle or diorama a defined occupant and a more readable scene composition. In truck models, construction layouts or miniature display builds, Susi can be placed to complete the interior view and strengthen the sense of activity around the vehicle. The 14 Years marking is stated in the product data. Batteries are not included.
Basic accessories
1:14 SW 3mm Socket Wrench, steel tool
500907595€8.69
Small-scale model work depends on the right tool at the right size, and this 1:14 socket wrench is built around that exact need. The SW 3 mm profile and steel construction give model builders a dedicated wrench for matching fasteners on 1:14 vehicles and accessories, with a compact form that suits bench work and fine adjustments. The steel body focuses on direct, mechanical contact with small nuts and fittings, helping transfer turning force cleanly where a loose or oversized tool can slip. A black handle section adds a defined grip area for controlled hand placement during assembly, maintenance, or part changes. Because the wrench is sized specifically for SW 3 mm hardware, it fits naturally into model-building setups where consistent fastener handling matters more than broad, all-purpose use. On the workbench, it supports routine jobs such as tightening matching fittings after a rebuild, loosening hardware during servicing, or making clean adjustments on 1:14 components. Age marking: 14 Years.
Basic accessories
1:14 TAM 3-Speed-Gear Hi-Torque Upgrade Kit
500907115€23.99
A 3-speed truck transmission changes character noticeably when the gearing shifts toward torque, and this 1:14 TAM 3-Speed-Gear Hi-Torque Upgrade Kit is built exactly for that kind of drivetrain tuning. The conversion uses a smaller motor pinion to deliver 20% more torque while reducing the truck's speed, creating a setup that puts more emphasis on pulling power than outright pace. At the centre of the kit is an 8T pinion paired with a front gear plate for the stated 1:14 application. Rather than changing the whole transmission, the upgrade targets the gearing itself, making it a focused modification for model builders who enjoy refining how a truck responds under load. The altered ratio changes how power is transferred through the 3-speed gearbox, so the effect comes from the mechanical setup rather than from electronics or software. With age marking 14 Years, the kit sits in the hobby segment where drivetrain parts and fitment details matter. This kind of conversion suits workshop sessions built around tuning, rebuilding or adapting an existing 1:14 truck for a different driving feel. It also fits display and running models where lower speed and stronger torque better match the intended use of the transmission.
Basic accessories
1:14 Tamiya Alum. Frame, model accessory
500907063€24.49
Custom fabrication is part of the appeal in 1:14 truck building, and this undrilled aluminium frame stock opens that route with a clean, workshop-ready starting point. The bright-drawn surface and rounded edges give the material a neat finish while keeping the profile comfortable to handle during measuring, marking and cutting. The channel section is defined by 21 mm height, 7 mm width and 1.5 mm thickness, giving model builders a clear basis for planning structural work around scale proportions. Each length measures 1 m, and the 2 x 1 m format provides matching stock for paired frame rails or other symmetrical construction tasks. Because the material is undrilled, mounting points and cut lengths can be set to the needs of the specific build rather than following a fixed hole pattern. That makes it suitable for replacement sections, scratch-built chassis work or adapted layouts within 1:14 Tamiya projects. On the bench, the long lengths support careful alignment before drilling and fastening, especially where a build calls for matched sides and clean spacing between cross members. Age 14 years+ is stated for this model accessory.
Basic accessories
1:14 Tension Belt Dummy, model accessory, 10x
500907143€11.29
Curtainside trailers are defined by the hardware that runs along their flanks, and this 1:14 Tension Belt Dummy set brings that visual cue into a scale build with 10 matching detailing parts. The format suits model-building enthusiasts who want a transport trailer to carry the look of real side-fastening equipment across the body. The set is intended for 1:14 model projects and focuses on exterior detailing rather than mechanical function. The supplied parts are arranged as moulded components for placement on a curtainside trailer, where they add structure and a more technical finish to the side area. The designation Tension Belt Dummy makes the decorative role clear, so the set can be used to sharpen the scale impression of a build without suggesting a working strap mechanism. In workshop scenes, depot layouts or road transport dioramas, these details help a trailer body read more convincingly at model scale. Used during a fresh build or as part of a later upgrade, the 10-piece set gives builders a straightforward way to add repeated side detail across a trailer. Age marking: 14 Years. The compact accessory format also suits spare-parts storage and planned custom projects centred on 1:14 curtainside vehicles.
Tyres & rims
1:14 Tire Insert 20 mm, model accessory
500907517€11.79
This 1:14 tire insert in 20 mm format is a dedicated model accessory for Carson references 907012 and 907612. The foam ring sits inside the tyre and provides the internal support that helps the casing hold its shape more evenly while the wheel is in use. Its circular form with a large centre opening is made for placement as an inner support element rather than as an external wheel part. That makes it a useful choice when an existing insert has worn down, when a wheel and tyre set is being rebuilt, or when compatible running gear is being prepared as a spare setup. The stated 20 mm size gives a clear fit reference, while the 1:14 scale keeps the application focused on matching model vehicles. As a replacement component, it serves a precise workshop role in maintenance and setup work. In practice, inserts like this are fitted during tyre assembly to support the tyre from within before the wheel is run again. That makes them relevant for bench work, parts sorting and routine upkeep of compatible 1:14 models, especially where a direct fit for 907012 or 907612 is required.
Tyres & rims
1:14 Tire/Wheel-Set LowLoad Fulda/SAF
500907141€47.99
In 1:14 scale, the Tire/Wheel-Set LowLoad Fulda/SAF adds a distinctly commercial vehicle character to compatible model builds. The combination of black treaded tires and silver-grey wheel parts creates the look of a working truck or trailer axle setup, while the LowLoad, Fulda and SAF designation gives the set a clear enthusiast focus. The set is shown with separate tire and rim elements, along with small metal ball bearings and screws for assembly. That layout supports a more involved workshop-style build, where the wheel units are fitted together step by step rather than supplied as a single molded piece. The tread texture gives each wheel a defined surface look, and the included bearings support the rotating function once installed. For model builders, this makes the set suitable both for replacement work and for adding more specific wheel detail to an existing 1:14 vehicle project. On the bench, the individual components suit careful fitting and setup work. Once mounted on a compatible model, the assembled wheels contribute to the overall scale impression of the chassis and help complete a truck or trailer build with matching running gear detail.
Basic accessories
1:14 Towing bar Low loader, model accessory
500907627€26.99
This 1:14 towing bar for the Low loader adds a defined structural part to scale model work, with a black moulded form that follows an A-shaped layout and integrates reinforcing ribs across the frame. The geometry shown in the part itself points to a mechanical connection role, with 1 circular mounting eye on one end and 2 cylindrical mounting points on the other for placement in the intended assembly. As a dedicated model accessory in the Models & Accessories range, the part suits replacement work, maintenance tasks or the completion of an existing 1:14 Low loader setup. The ribbed structure gives the component its formed profile, while the open triangular shape keeps the connection points clearly accessible during fitting. For hobby projects where the correct shape matters, a scale-specific part like this helps keep the model configuration consistent with the intended layout. The 14 Years age marking places the towing bar in the hobby segment rather than in early-play ranges. It fits naturally into bench work focused on repair, parts management and scale vehicle upkeep, whether the aim is to replace a worn component or keep a matching spare ready for later use.
Basic accessories
1:14 Tractor Truck Taillights, accessory
500907038€19.49
Heavy road tractors are defined by the details at the rear, and this 1:14 taillight set brings that scale character into a truck build with a 6-section layout and a matched pair of rear lights. The compact housings suit model projects where the back end needs the same visual attention as the cab and chassis. Each set contains 2 taillights, making it suitable for left and right mounting on compatible 1:14 tractor truck models. The 6-section design gives the rear lighting area a more structured look than a plain single-piece lamp and helps complete the visual language of a scale truck body. The parts are intended for trucks and can be illuminated, which opens the door to more advanced finishing work when a build calls for functional light detailing. As an accessory in the models and supplies category, the set fits naturally into custom builds, replacements, or visual upgrades. On a workshop bench, the pair works well for refreshing an existing rear section or adding a more defined light arrangement to a new truck project. In a display setting, the segmented layout supports the realistic look that model-building enthusiasts often want from a 1:14 road vehicle.
Basic accessories
1:14 Trailer Door Hinge, accessory, 270° set
500907142€16.99
Trailer bodies and transport builds gain a more functional finish with this 1:14 door hinge set for model trailers. The 270° hinge design supports door movement far beyond a simple open-and-close action, making it suitable for builds that aim to show realistic access points and working rear or side doors. The set is supplied as 6 hinges and, according to the pictured contents, also includes matching mounting parts, dark hinge pins and silver countersunk screws for installation. That combination gives model builders the core hardware for fitting articulated doors on a trailer body while keeping the mechanism compact around the mounting point. The countersunk screw format helps the fittings sit neatly against the surface, and the separate pin construction forms the hinge axis during assembly. With a 1:14 scale match, the set suits trailer projects in that scale where door function is part of the visual and mechanical detail. This accessory works well for replacement jobs on existing models and for custom trailer construction where opening panels add realism to the finished vehicle. Age marking: 14 Years. Assembly is required as part of fitting the hinges to the chosen model.
Basic accessories
1:14 Trailer Door Locking Set, model accessory
500907356€37.99
Trailer hardware is one of the details that gives a scale build its finished character, and this 1:14 Trailer Door Locking Set focuses exactly on that area. Made for 1:14 trailer models, the set adds dedicated door locking parts that bring more structure and realism to the rear section of a trailer build. The set includes several small locking elements on sprue frames, along with rods, linkage-style bars and screws for assembly. These separate parts create a mechanical layout that can be mounted onto trailer doors and connected across the door area, so the locking setup reads as a purposeful piece of model hardware rather than a moulded surface detail. The black finish keeps the appearance clean and technical, which suits utility trailers, transport builds and workshop-focused custom projects. As an accessory set, it also opens up extra scope for refining an existing model with more visible functional detail. On the bench, the parts suit careful fitting and staged assembly; on the finished trailer, they sharpen the look of the rear doors with a more complete scale presentation. Age 14 Years.
Basic accessories
1:14 Trailer Fog & Backup Light, model accessory
500907077€18.99
A rear fog light and backup light are standard visual cues on full-size trailers, and this 1:14 set brings that same workshop detail to a scale build. The accessory is designed as a 1+1 combination, adding 1 fog light and 1 backup light to the rear section of a model trailer with a clean, functional look. The set uses separate clear and red lens parts, metal mounting pieces and screws, so the finished assembly gains both colour contrast and defined hardware detail. That mix of components suits builders who want to refine the rear view of a truck or trailer rather than leave the bodywork plain. The compact parts can be integrated into a new project or used during a conversion, where the extra lighting details help the rear panel look closer to a working road trailer. The 1:14 scale keeps the proportions aligned with matching commercial vehicle models and trailer bodies. Mounted at the back of a trailer, the light units add a realistic finishing touch beside mudguards, rear bars or panel sections. On a display build, they sharpen the technical look of the rear end; on a custom project, they provide a focused upgrade that fits naturally into detailed scale transport scenes. Age marking: 14 Years
Basic accessories
1:14 Trailer Hitch with Pole, RC accessory
500907182€59.99
A trailer hitch changes the whole character of a scale truck build, turning the rear section into a working connection point with a more authentic mechanical layout. This 1:14 Trailer Hitch with Pole for RC and mechanical models brings that function into the build with a compact black assembly that focuses on coupling detail and realistic rear-end hardware. The set centres on a hitch mechanism with a pivoting bracket, a long lever arm and a rectangular mounting plate, supported by screws, nuts and a metal washer for installation. The linkage layout creates a clear mechanical connection that suits trailer use and adds visible function to the chassis area. In close view, the assembly gives the rear section a more technical appearance through its articulated parts, mounting points and drawbar-style structure. The black finish keeps the look consistent with underbody components and commercial vehicle hardware often seen on scale truck models. Age marking: 14 years+ Mounted at the rear of a truck or trailer build, the hitch supports scenes with coupled transport setups, workshop detailing or display arrangements that focus on utility vehicles. It also suits hobby projects where the rear mechanism matters as much as the bodywork, giving the model a more complete working layout in 1:14 scale.
Basic accessories
1:14 Trailer License Plate Bracket Accessory
500907034€13.49
A trailer rear section gains a more complete scale look with this 1:14 license plate bracket accessory, shaped for model-building enthusiasts who refine the details of trucks and trailers. The bracket comes with 2 rubber buffers and is prepared for lighting, adding a functional base for rear-end finishing on compatible builds. Its stated compatibility covers vehicles and trailers in 1:14.5 and 1:16 scale, which makes it useful across more than one workshop project. The included mounting material supports straightforward fitting on the rear section, while the bracket format suits builds that need a dedicated place for a license plate assembly rather than a generic improvised mount. The combination of bracket form, rubber buffers and lighting-ready layout gives the rear area a more technical, road-going appearance in scale form. On a detailed tractor unit and trailer combination, the part helps complete the visual line at the back of the model. It also suits restoration work, upgrades, or fresh custom builds where the rear assembly needs a defined finishing component. Age 14+
Basic accessories
1:14 Trailer Mud Guard Set, accessory, straight
500907036€22.49
Trailer details shape the finished look of a scale truck, and this 1:14 Trailer Mud Guard Set adds that functional bodywork with 4 straight fenders for semitrailer chassis and custom builds. The set is arranged as 2 left-side and 2 right-side parts, creating a balanced layout around the wheel area while keeping the build aligned with common trailer proportions. Each mud guard is supplied with mounts and mounting hardware, and the M3 thread specification gives a clear basis for installation on compatible frames. The straight form suits projects that call for a clean, utility-led line along the trailer section rather than a curved or stepped profile. The black moulded parts shown in the set carry ribbed surface detailing, which helps the wheel area read as a purposeful working component on truck and transport models. Suitability for both 1:14 and 1:16 trailers also makes the set useful across more than one scale workshop setup. On a replacement build, the 4-piece layout restores a complete left and right arrangement in one go. On a scratch-built hauler or modified semitrailer frame, the included hardware supports a direct route to fitting the guards and integrating them into the chassis layout. Age 14+
Basic accessories
1:14 Trailer Mud Guard, accessory set, 2-piece
500907137€28.99
On a 1:14 trailer, the mud guards shape the wheel area and sharpen the finished outline of the build. This 2-piece set provides 2 matching trailer mud guards in black, giving model-building enthusiasts a straightforward way to replace missing parts or complete a trailer with the correct wheel-arch coverage. Each guard uses a curved form that sits over the wheel section, while the moulded tabs create defined mounting points for fastening. The set also includes 4 spacer bushings, 4 screws, 4 washers and 4 hex nuts, matching the visible attachment layout needed for fitting both parts. The black finish keeps the look uniform across the pair, and the identical left-right format supports a balanced appearance once mounted on the trailer. Whether a workshop build needs replacement body parts or a trailer project is being completed from individual components, this accessory set adds the specific hardware and shaped guards needed for the job. The age marking is 14 years, and the set is intended for model and accessory use within the 1:14 scale range.
Electronics
1:14 Trailer Side Marker, model accessory
500907382€34.99
Side marker lights are part of the visual language that gives a scale trailer its convincing road-going character. This 1:14 set is made for model trailer lighting layouts and runs on 7.2 to 12 V, fitting common electrical setups used in hobby truck builds. The set consists of 2 orange side markers with attached wiring, shown with red and black leads for straightforward polarity recognition during installation. Their compact format suits placement along the trailer sides, where marker lights define the outline more clearly and add a technical finishing touch to the body. As an electronic accessory in the Models & Accessories range, this set is aimed at hobbyists working on custom truck or trailer electrics rather than a complete ready-to-run vehicle. The 14+ age marking is stated in the product data. Used on a workshop build, a display trailer or a running road rig, the lights add a small but noticeable scale cue once connected to a suitable power system. They also work well when an existing trailer setup needs replacement marker units in a matching 1:14 format.
Basic accessories
1:14 Trailer Splash guard Set, model accessory
500907183€30.99
In 1:14 scale, the Trailer Splash guard Set adds a purposeful trailer detail that sharpens the look of a compatible model build. The black parts use a long rectangular shape with rounded corners, creating a clean technical line that sits naturally on trailer assemblies. Each guard piece shows 4 evenly spaced circular holes along the upper edge, indicating a defined mounting pattern for attachment on suitable trailer sections. That layout gives model-building enthusiasts a concrete starting point when planning placement and alignment within a custom trailer project. The flat panel form keeps the visual effect restrained and functional, which suits workshop, transport, and utility-style model themes. As a dedicated accessory rather than a complete vehicle, the set is aimed at builds where small exterior details shape the finished overall impression. The splash guards fit especially well into trailer projects that need added body detailing around the wheel area or rear section. Combined with other 1:14 components, the set supports a more resolved scale appearance for display builds, workshop sessions, or careful model upgrades.
Basic accessories
1:14 Trailer Support Legs, model accessory, 73 mm
500907375€40.99
Scale truck trailers gain a crisp workshop-style detail with these 1:14 aluminium support legs in a 2-piece set. Each leg measures 73 mm and is shaped as a compact metal assembly, making the pair a focused addition for trailer builds where scale proportion and hardware detail both matter. The aluminium construction gives the parts a precise machined appearance that suits technical model projects. Based on the visible component layout, each support leg combines a rectangular bar, a cylindrical sleeve, a rod and a round end disc, creating a defined mechanical look for installation on a matching trailer setup. The pair format supports symmetrical fitting on both sides of the trailer assembly, which helps maintain a consistent appearance across the underframe. Age marking: 14 years. In a workshop build, these support legs fit naturally into 1:14 trailer detailing, whether replacing existing parts or refining a custom scale rig. The 73 mm size keeps the specification clear for planning around compatible trailer dimensions, while the metal finish adds a purposeful visual accent to the completed model.
Basic accessories
1:14 Trailer Taillights, accessory, 7 sections
500907037€19.49
Rear lighting is one of the details that gives a scale trailer its finished road-going look, and this 1:14 taillight set brings that detail into compact model dimensions. The set includes 2 trailer taillights with a 7-section design, giving the rear end of a model trailer a more technical and realistic appearance while keeping the layout suited to scale builds. Each light unit measures 32 mm in length, 12 mm in width and 7 mm in height, making the set suitable where rear crossmembers and mounting areas offer limited space. The format works with trailers in 1:14 and 1:16 scale, so the lights can be used on new builds as well as on replacement or upgrade projects. The 7-section arrangement adds a structured rear-light look that suits transport trailers, utility trailers and other detailed model applications. Prepared for lighting, the parts also support builders who want to integrate illuminated rear functions into the trailer setup. Mounted at the rear of a scale trailer, the pair helps complete the visual balance of the chassis and bodywork with a component that belongs exactly where model builders expect it. For workshop upgrades, restoration projects or fresh custom assemblies, these taillights add a precise finishing detail without taking up much installation space.
Basic accessories
1:14 Trailer Underride Guard, accessory, 240 mm
500907079€41.99
On full-size trailers, underride protection is part of the functional silhouette beneath the bodywork. In 1:14 scale, this Trailer Underride Guard transfers that same lower-frame detail into a dedicated accessory set with a 240 mm format for model trailer projects. The set is built around metal rails and matching brackets, creating a technical add-on that suits transport-themed builds with visible chassis structure. Pre-drilled holes in the parts support measured placement on the trailer frame and help keep the left and right sides consistently aligned during fitting. The silver-coloured finish works naturally with ribbed trailer panels, dark underframes and chrome-look wheel details often seen on road-going trailer models. Included screws, nuts, washers and fastening parts provide the hardware needed for installation, keeping the focus on the fit and final appearance rather than on sourcing matching fixings. Used on a box trailer or semi-trailer model, the assembled guard strengthens the visual transition between body, underframe and running gear. Age marking: 14 years and up. For hobby workbench sessions, detailing upgrades or replacement tasks on a 1:14 trailer, this accessory adds a clear structural element with workshop-style realism.
Basic accessories
1:14 Trailersus. 8mm Lift, trailer axle parts
500907644€29.99
A 1:14 trailer model gains a more technical underbody look with this Trailersus. set and its 8 mm lift layout. Created for retrofitting existing trailer axles with dummy air springs, the set brings the suspension area closer to the visual character often sought in detailed truck and trailer builds. The package contains the necessary moulded parts and 2 air bellows for the conversion. It is intended for use with dummy air springs 500907069, while the metal parts and the assembly material are reused from the existing axle. That setup keeps the focus on the suspension components that change the appearance of the axle assembly, rather than replacing the complete axle hardware. The black moulded parts suit workshop-style builds, restoration projects, and scale trailer customisation where the axle zone is meant to look more complete. One set is required for each trailer axle, which helps when planning a single retrofit or equipping several axles on a longer trailer. The 14 Years marking is stated in the product data. In a display build or a running truck-and-trailer combination, the conversion adds a more model-focused finish to the area beneath the trailer body.
Tyres & rims
1:14 Trailerwheel, wheel rim, silver wide tire
500907026€17.49
In 1:14 truck modelling, the right wheel hardware shapes both the stance and the accuracy of a trailer build. This trailer wheel rim is made in silver and is designed for wide tyre applications, giving semi-trailer projects a scale-correct base with a clean commercial vehicle look. The rim is made of plastic and is constructed specifically for Fulda wide tyre 500907012. Its form supports the tyre properly and matches the requirements of wide trailer wheel setups used on detailed model transport combinations. The part is suitable for all axles of Tamiya semi-trailers, which makes it a practical choice for replacement work, ongoing workshop projects or planned trailer configurations within that platform. The silver finish works well on road-going trailer builds where a realistic wheel appearance matters alongside fit. The set contains 2 wheel rims, making it suitable for one trailer axle pair. In a workshop setting, the pair can be used to refresh an existing trailer or complete a new axle assembly with matching wheel width and finish. Age 14+
Basic accessories
1:14 Traktor Truck fire drencher, accessory
500907123€8.99
Scaled accessories often decide whether a truck build looks merely assembled or fully equipped. This 1:14 Traktor Truck fire drencher adds that final workshop-style detail, bringing a service-oriented look to model trucks and trailers through a compact exterior attachment. The accessory is supplied as a kit and is designed for universal attachment across 1:14 model trucks and trailers. That makes it useful both for a fresh build and for upgrading an existing rig with an extra equipment point on the body or side area. Decals are included to refine the assembled part with printed detail, helping the finished fitting sit more naturally within a scale vehicle layout. The focus stays on visual realism rather than on a large conversion, so the fire drencher works as a small component with a clear effect on the overall appearance. Mounted on a truck or trailer, the accessory suits workshop, service, utility or emergency-style model scenes where exterior equipment helps define the vehicle's role. The 14 Years marking fits hobby-focused use, and the compact format makes the part easy to integrate into custom detailing plans across different 1:14 setups.
Basic accessories
1:14 Truck Alum. Coupler Plate, model accessory
500530918€53.99
Truck models in 1:14 scale rely on hardware that fits the chassis layout with accuracy, and this aluminium coupler plate set is built around that need. The set combines a large machined plate, a smaller matching bracket and 5 screws, creating a dedicated mounting solution for detailed truck builds. The main plate has a rounded open centre, several drilled holes and curved slots that allow the mounting position to be set with care during installation. Countersunk holes support a flush screw fit, while the shaped cut-outs keep the assembly compact around the surrounding structure. The second metal part adds a separate fastening point with its central circular opening and additional mounting holes, giving model builders another defined connection element within the same setup. The silver finish and machined surfaces match the technical character of scale truck components without adding unnecessary bulk. On a workshop bench, the set suits rebuilds, upgrades or replacement work where a coupler mounting point needs a clean mechanical layout. In a finished 1:14 truck, the shaped plate and bracket integrate as functional hardware that supports a tidy, purposeful chassis installation.
Tyres & rims
1:14 Truck Front Wheel, model accessory, chrome
500907061€26.49
Heavy truck models gain a more defined front end with these 1:14 Truck Front Wheel rims in a wide format and chrome finish. Designed for TAMIYA trucks, the rims fit the front axle and bring a bright metallic surface together with a deeper wheel profile that stands out clearly on road-going tractor units and custom show builds. The set contains 2 matching rims, making it suitable for the left and right side of the front axle without mixing styles or widths. The wheel face uses a large central hub opening and a ring of small bolt holes, details that echo full-size truck wheel design and give the axle area a more technical appearance. The wide format changes the visual presence at the front of the model, while the reflective finish catches light across the dish shape and hub area. Recommended tyre: Fulda, item 500907012. This accessory suits restoration work on an existing truck, a visual refresh during a rebuild, or a more defined wheel setup on a new 1:14 project. On display shelves and on the running model alike, the chrome rims add a clean truck-specific finish to the front axle.
Tyres & rims
1:14 Truck Front Wheel, rim, wide ABS
500907013€17.49
Truck models in 1:14 scale rely on axle-specific parts, and this wheel rim set is made for that exact role. The 2 wide front wheel rims are intended for truck front axles and give compatible builds a dedicated replacement or upgrade part with the correct format for the front end. Each rim is made from ABS and uses a wide profile that is constructed for the Fulda wide tire 500907012 named in the product data. The gray finish suits technical truck builds, while the molded form shown on both rim faces highlights the hub opening, bolt-hole styling and reinforcing spoke structure on the inner side. That combination makes the set useful both for restoring an existing model and for assembling a front axle setup with matching wheel hardware. Compatibility is stated for all front axles of Tamiya trucks, which places the rims clearly within established 1:14 truck model projects. In workshop use, the 2-piece contents support a paired front-wheel installation, whether the goal is replacing worn rims, preparing a rebuild, or completing a truck chassis with axle-correct wheel components.