Wishbones

1:10 XS Lower Arms Kit Front, spare part

€13.49

This 1:10 XS Lower Arms Kit Front is a dedicated spare part set for Carson XS-Chassis vehicles and focuses on the front suspension area where accurate fit matters during repair work. The set combines 2 lower arms, 2 holders and 4 pins, giving model-building enthusiasts the named components needed for a targeted replacement on the front end. Compatibility is stated for the XS-Chassis references 500404252, 500404253, 500404254 and 500404255. These correspond to the Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red variants listed in the data, which keeps the application of the set tied to clearly identified chassis versions. As a front-specific spare parts pack, the kit is suited to maintenance after wear, impact or disassembly in the suspension area. The grouped parts selection also keeps matching holders and pins together with the lower arms, which helps streamline workshop preparation for the repair. On the bench, the set fits naturally into routine chassis servicing, rebuilds after running sessions or the replacement of damaged front-end parts on compatible models. The 14 Years marking is stated in the product data.

Wishbones

1:10 XS Upper Arms Kit, chassis spare part

€15.49

This 1:10 XS Upper Arms Kit is a chassis spare part for compatible CARSON XS-Chassis vehicles and brings together key linkage pieces for suspension and steering work in one set. The package contents named in the data include 4 upper arms for front and rear use and 2 steering linkage parts, making it a focused replacement set for mechanical connection points on the model. The kit is specified for CARSON XS-Chassis references 500404252, 500404253, 500404254 and 500404255. Those model numbers cover Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red. The parts shown use eyelet-style ends and matching small hardware for pivoting connections within the chassis layout, which suits routine maintenance when worn or damaged links need to be exchanged. For hobby workbench use, this kind of set helps restore the intended geometry of the front or rear assembly without replacing unrelated components. With age marking 14 Years, the set fits the hobby-focused character of RC model upkeep and rebuild work. It suits repair sessions, spare-parts storage and planned chassis servicing on compatible XS models, especially when steering response or suspension articulation depends on fresh linkage parts.

Wishbones

Akuma Tie-Rods Kit, RC spare part, 4 pcs

€12.79

The Akuma tie-rods kit supplies 4 replacement parts for front and rear linkage work on compatible RC vehicle setups. As a dedicated spare part set, it gives model-building enthusiasts the core pieces needed when worn linkage components need to be exchanged and the chassis brought back into running condition. The set is identified in the data as a front and rear tie-rods kit and is intended for Akuma models. That makes it a focused choice for maintenance, repair, or parts stock in an RC workshop rather than a general accessory with unclear fit. The included 4-piece format suits jobs where several connection points need attention at once, reducing the need to source individual rods separately. The product image shows black moulded linkage components with mounting holes and small metal posts, indicating a mechanical connection role within the steering or suspension layout. Such parts are central wherever wheel guidance and chassis articulation depend on clean, correctly aligned link points. In practice, this kind of spare set fits naturally into routine rebuilds after heavy running sessions, collision damage, or scheduled chassis servicing. It also works well as a shelf-ready replacement set for hobby benches where compatible Akuma parts are kept available for fast turnaround between repair and the next drive.  Warning! Not suitable for children under 14 years.

Wishbones

Drakuro Lower Suspension Arms, chassis spare part

€12.99

The Drakuro lower suspension arms are a dedicated spare part set for the 1:8 4WD chassis and provide a direct replacement option for compatible Drakuro models. Supplied as 2 pieces, this set is intended for the lower suspension position, where the arms connect key running gear components and support the chassis layout during maintenance work. For model-building enthusiasts, a correct-fit replacement part keeps a repair focused and avoids unnecessary guesswork during servicing. The Drakuro designation in the part name links the set clearly to the matching vehicle platform named in the data, including 500409096 Drakuro BL 3S anthracite/red and 500409097 Drakuro BL 3S blue. That makes the pair a practical choice when worn or damaged suspension parts need to be exchanged while keeping the original component arrangement of the 1:8 4WD chassis. Whether the workshop task is routine upkeep after running sessions or a targeted repair on the suspension assembly, this 2-piece set covers the lower arm position with the exact component group stated in the data. As a chassis spare part, it suits bench work where fit, platform match and clear parts identification matter.  Warning! Not suitable for children under 14 years.

Wishbones

Drakuro Upper Arm Mount Set, chassis spare part

€10.49

This front and rear upper control arm mount set is a dedicated spare part for the 1:8 4WD chassis used by the Carson Drakuro BL 3S range. The data names compatibility with version 500409096 in Anthracite/Red and version 500409097 in Blue, making the set a precise match for those listed models rather than a generic suspension part. As an upper suspension arm holder for front and rear fitment, the set serves a defined role in the chassis layout by providing the mounting position for the upper control arms. That makes it relevant when maintenance work calls for a direct replacement in the suspension area. The naming in the data keeps the application clear: Drakuro upper suspension arm holder front and rear. For hobby work on a 1:8 4WD platform, that clarity helps when selecting the correct chassis component for an existing vehicle. In the workshop or at the bench, a model-specific spare part keeps repair planning focused on the exact platform named in the data. This set fits the listed Drakuro BL 3S variants and supports continued use of the chassis with the correct front and rear upper arm mounting component.  Warning! Not suitable for children under 14 years.

Wishbones

Drakuro Upper Outer Arm Hinge Pins, RC spare part

€4.49

The Drakuro Upper outer arm hinge pins are a dedicated spare part for the Drakuro 1:8 4WD chassis, built around a precise suspension mounting task rather than a universal fit. With a specified length of 30 mm and a pack of 2 pieces, this set addresses the upper outer arm position named in the parts data and keeps replacement work tied to the correct location on the vehicle. On a 4WD chassis, hinge pins sit at the heart of the suspension linkage, connecting moving arm sections while allowing controlled travel through bumps, landings and steering inputs. Using the stated Drakuro-specific part helps maintain the intended relationship between the arm and its mounting point, which matters when worn hardware starts to introduce play into the suspension. The 1:8 scale platform reference also makes this spare part easy to place within an existing workshop stock for the correct vehicle family. In regular RC maintenance, parts like these are typically fitted during suspension service after heavy running or when rebuilding a damaged corner of the chassis. For hobbyists keeping a Drakuro BL 3S ready for the next outing, a correctly assigned hinge pin set helps keep repairs direct, organised and matched to the named model platform.  Warning! Not suitable for children under 14 years.

Wishbones

Drakuro Upper Suspension Arms, RC spare part

€8.49

The Drakuro Upper suspension arms set is a dedicated spare part for the 1:8 4WD chassis used on Carson Drakuro BL 3S models. With 2 upper control arms included, the set addresses one clearly defined area of the suspension system and gives model-building enthusiasts the correct replacement parts for service work on anthracite/red and blue Drakuro BL 3S versions. In the suspension layout, upper control arms guide the wheel assembly through its movement and work as part of the geometry that keeps the chassis operating as intended. Replacing worn or damaged arms can be an important step when restoring a vehicle after heavy running, contact damage or general workshop wear. The designation in the data identifies these parts specifically as upper suspension arms rather than a universal linkage set, which matters when matching spares to the correct position on a 1:8 platform. The set quantity of 2 pieces suits direct replacement of the named component group without introducing unrelated hardware into the job. This spare part fits maintenance benches, race-day pit boxes and home workshop stock alike. For hobbyists keeping a Drakuro BL 3S ready for the next run, a model-specific suspension replacement like this helps keep servicing focused on the exact chassis parts that need attention.  Warning! Not suitable for children under 14 years.

Wishbones

Front Suspension Arm Set, RC spare part, 2 pcs

€10.79

A fresh front end starts with the parts that locate the wheel assembly, and this front suspension arm set supplies 2 lower arms for that job on selected Carson models. The black molded components use a reinforced wishbone-style shape with cutouts, pivot mounts and defined mounting points that suit front axle repair when worn or damaged arms need replacement. The set is specified for Virus 4.0, 4.1, 4.2, 4.3 and Race variants, and it also fits Akuma models named in the product data. Each arm is formed as a mirrored chassis part, so the pair covers the front lower arm position as a matched replacement set rather than a mixed hardware bundle. The geometry includes a circular recessed mounting area, a long slot and additional holes that support the intended connection points within the suspension layout. The matte black finish keeps the look consistent with technical RC chassis parts. In workshop use, a dedicated spare part like this helps bring a model back into service after front suspension wear, impact damage or routine maintenance. The 2-piece format suits targeted repairs on the front axle and keeps the rebuild centered on the exact area named by the set.  Warning! Not suitable for children under 14 years.

Wishbones

KoD Hinge Pins for Arms, spare parts set

€10.49

KoD Hinge Pins for Arms is a spare parts set for model maintenance, centered on the arm connection points that rely on correctly fitted pins to keep moving sections aligned. The set is presented as 4 hinge pins for arms, making it a focused replacement option for repairs where the original hardware needs to be renewed. The product image shows multiple metal rods with grooves near the ends and matching retaining clips, indicating a fastening system in which the clips lock the pins into place on the relevant assembly points. This kind of hardware is used where articulated sections need a defined pivot and secure retention rather than a loose push fit. The metal construction suits the mechanical role of the parts, while the grooved ends provide the detail needed for clip-based fixing. As a model supplies entry within Models & Accessories, the set fits naturally into routine servicing, rebuilds and parts replacement work. With the age marking of 14 Years in the product data, the set sits in a hobby context rather than an early-play category. It can be kept on hand for workshop stock, used during a repair session, or fitted when an arm assembly is being refreshed as part of ongoing model upkeep.

Wishbones

KoD Lower Arms Kit Front, RC spare parts

€10.79

The KoD Lower Arms Kit Front brings the front suspension layout of the KoD platform back into service with a matched 2-piece replacement set. Each arm is shaped for its side of the chassis and marked L or R, so the left and right positions stay clearly defined when the front end is rebuilt. The moulded arms combine circular pivot areas, hinge barrel ends and integrated mounting holes in one structural part. That geometry matters at the front axle, where the lower arm helps connect the wheel assembly to the chassis while allowing the movement needed through steering and suspension travel. The cutout design reduces excess material in the arm shape while keeping the key connection points clearly formed. For hobby workbench use, that means the replacement focuses on the actual wear part rather than a broader front-end overhaul. This set suits maintenance after impact damage, wear at the original arm, or a planned refresh of the front suspension assembly on a KoD model. As a dedicated spare part rather than a universal fitting, it is aimed at model-building enthusiasts who keep an RC vehicle running with the correct chassis-specific components. Age 14+

Wishbones

KoD Lower Suspension Mount Rear RC Spare Part

€15.49

The KoD Lower suspension mount rear is a dedicated RC spare part for suspension maintenance and chassis setup work on compatible model vehicles. Its blue anodized metal construction and elongated mount shape bring a technical workshop look while providing a defined base for rear suspension attachment. The set contains 2 mounting parts, marked RF and RR for clear orientation during installation and service. Each mount features 2 large circular end holes with dark inserts and 2 smaller centered screw holes, creating fixed attachment points for the surrounding suspension hardware. The different center profiles of the 2 parts indicate position-specific fitment within the assembly, so the rear setup can be rebuilt with the correct component layout. This makes the part useful when replacing worn mounts or restoring a damaged chassis connection in the suspension area. On the bench, the mounts support careful rebuilds, maintenance routines and tuning work where exact part placement matters. Combined with compatible RC running gear, they help return the rear section to a defined mounting condition for further setup changes and track use.

Wishbones

KoD Lower Suspension Mount, RC spare part

€15.49

The KoD Lower suspension mount front is a position-specific RC spare part set for the front section of the KoD platform. The set contains 2 separate machined metal parts, marked FF and FR, so each mount can be assigned to its intended front position during chassis work. The blue anodized finish gives the parts a distinct visual identity, while the black inserts define the larger mounting points clearly. Each mount is built with 2 large outer holes and 2 smaller inner screw holes, creating a structured fixing pattern for the front assembly. The 2 shapes are not identical: one part uses a central semicircular section, while the other has a deeper centre recess. This difference reflects the specific front mounting locations and helps keep the geometry of the assembly matched to the layout. As a replacement part, this set suits repair, maintenance, or parts refresh work on a KoD RC vehicle. The clearly marked FF and FR positions support straightforward identification when the front end is dismantled and rebuilt, and the metal construction makes the set a focused choice for chassis-related service tasks.

Wishbones

KoD Upper Front/Rear Tie-Rod Kit, RC spare part

€14.79

The KoD Upper front/rear tie-rod kit adds an adjustable linkage set to RC vehicle maintenance with 4 metal turnbuckles, 8 rod ends, 4 ball studs and 4 matching inserts. The silver turnbuckles use a hex centre section, so the rod length can be altered directly on the linkage during setup work, making the kit useful when front or rear geometry needs correction after wear, repair or a parts change. The 8 black ends thread onto the turnbuckles to create 4 complete rods, while the ball studs and inserts provide the pivoting connection points that let the linkage articulate through steering or suspension travel. This combination suits upper front and rear tie-rod positions where clean movement and accurate adjustment matter. As a dedicated spare part set, the kit supports replacement of worn linkage hardware without mixing unmatched components from different assemblies. On the bench, the separate hardware layout keeps each element easy to identify during fitting and rebuild work. In an RC workshop setup, the kit serves as a practical stock part for routine servicing, damage repair or geometry tuning on compatible KoD model assemblies. The product data marks the set for 14 Years and up.

Wishbones

Suspension Arm Mount Set for Virus Akuma RC

€4.29

This suspension arm mount set is made for compatible Virus and Akuma RC vehicle platforms and focuses on the lower arms support area named in the product data. The 6 moulded parts shown in the set provide replacement hardware for maintenance tasks where small mounting elements in the suspension assembly need to be exchanged. Compatibility covers Virus 4.0, 4.1, 4.2, 4.3 and Race, alongside Akuma references listed for the set, which helps keep workshop planning clear when matching spares to an existing chassis. The parts are supplied as black moulded components in paired shapes, including oval and hook-like forms with circular locating sections. That geometry indicates their role as support and mounting pieces within the lower arm area rather than as decorative accessories. For hobbyists working on wear-prone running gear, a dedicated set like this keeps the repair focused on the exact section named by the spare designation. In workshop use, the set suits routine servicing, replacement of worn supports, or preparation of spare parts for compatible RC models. The age marking in the data is 14 years, and the compact format makes the set easy to store alongside other chassis spares for later maintenance sessions.  Warning! Not suitable for children under 14 years.

Wishbones

Suspension Arm Pins Set, RC spare part, 6 pcs

€10.99

Suspension arm hinge pins are small parts with a central role in RC chassis maintenance, linking the arm mount to the moving suspension point. This set provides 6 pins and 8 rings for compatible Carson models, giving model-building enthusiasts the exact hardware group needed for this repair task. The set is specified for the Virus 4.0, 4.1, 4.2 and 4.3 series, for Virus Race variants, and for Akuma. As a dedicated spare part, it focuses on one concrete service area instead of a broad mixed assortment, which helps keep maintenance work on the listed platforms clear and parts selection straightforward. The smooth metal pin format matches the function of a hinge pin at the arm pivot, where clean alignment and secure placement matter during chassis upkeep. The included rings complete the set for the stated application. In workshop use, this kind of hardware is suited to replacing lost, bent or worn originals during routine servicing or after intensive running. Stored with other model spares, the set supports quick turnaround when a compatible vehicle needs fresh suspension mounting hardware before the next session.  Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Front Toe In Plate Spare Part

€20.99

The VIRUS 4.0 EP/GP front toe in plate is a platform-specific spare part for the Virus and Akuma range, intended for the front end of the chassis where alignment parts and mounting points need to match the model exactly. Its elongated form, symmetrical layout and drilled fixing points suit precise installation within the front assembly. The metal part features large outer holes, recessed countersunk holes and milled center pockets, details that point to a fastening role in the steering or suspension area rather than a decorative add-on. Those shaped sections help define how the plate sits in the assembly and how adjoining hardware is positioned. As a replacement component, it is suited to maintenance, repair or the restoration of worn front-end hardware on compatible models. In a workshop setup, this kind of chassis part is used when a model needs its front geometry returned to the intended configuration after running sessions or part damage. The dedicated VIRUS 4.0 EP/GP and Akuma fit makes it relevant for hobbyists who keep existing vehicles in service with matching spare parts.  Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Lower Suspension Mount Kit, RC part

€15.99

The Virus 4.0 and Akuma platform uses the lower suspension mount as a key fixing point between chassis hardware and the suspension assembly, and this 2-piece kit focuses on exactly that area. The set is made for model-building enthusiasts who want a defined replacement part for the mounting section rather than a generic workshop workaround. The designation Lower Suspension Mount-Kit points to a dedicated chassis component group, with each piece shaped for the corresponding fixing position and drilled for the required mounting hardware. The product image shows red anodized metal parts alongside black moulded comparison parts, indicating a component style aimed at precise installation on the named platform. That makes the set relevant both for maintenance after heavy running sessions and for rebuilds where worn mounting points can affect the position of connected suspension parts. With the minimum age marking of 14 years, the kit sits clearly in the hobby and model workshop segment. In practice, this kind of replacement part belongs on the bench during a chassis refresh, a repair after track contact, or a planned parts update on a Virus 4.0 build. It also fits neatly into a spares setup for regular RC use, where model-specific mounting parts help keep a project ready for the next rebuild or running session.  Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Real Toe In Plate RC Spare Part

€24.99

The Virus 4.0 Real Toe In Plate brings a defined 2.5 degree chassis setting to Virus 4.0 EP and GP models, adding a focused spare part for maintenance, repair, or setup work. Its compact metal form, matte grey finish, and machined profile give the assembly a technical look that fits naturally into RC workshop routines. The component is shaped with an elongated base, rounded ends, 2 larger outer mounting holes, 2 smaller central holes, and a raised upright section. That layout points to a part built for exact positioning within the vehicle structure rather than a generic bracket. The recessed lower middle area creates a stepped profile, while the 2 U-shaped cutouts in the raised section add another clear structural detail. Together, these features make the part easy to identify during rebuilds and useful when replacing a worn or damaged chassis element with the correct geometry. In practice, this spare part fits the kind of bench work that keeps a model ready for the next run, whether the task is restoring the original setup on a Virus 4.0 platform or replacing a matching part on an Akuma-based build. The clearly defined mounting pattern supports straightforward integration with the intended assembly points, making it a practical addition to parts storage for regular RC servicing.  Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Tie Rod Set, model spare part

€14.79

The Virus 4.0 Tie Rod Set is a dedicated spare part for the Virus 4.0 platform and covers the upper front and rear tie rod position named in the product data. That defined fitment gives model-building enthusiasts a clear replacement part for maintenance work on the chassis, rather than a generic linkage that needs uncertain matching. As a model supply within the Models & Accessories range, this set supports routine upkeep where steering or suspension linkages have taken wear through repeated running. The upper front and rear assignment helps separate this part from other rods on the vehicle during workshop work. The spare part role also makes it useful for keeping a repair stock for the named platform, especially when a direct replacement is needed to return the model to service with the correct linkage position. In practical use, the set fits naturally into bench maintenance between driving sessions, rebuilds after heavy use, or planned servicing of the Virus 4.0 chassis. Age marking: 14 Years.  Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0/4.1 Front Sway Bar Kit, RC part

€13.79

The front axle has a major influence on how an RC buggy reacts when turn-in begins, and this Virus 4.0/4.1 Front Sway Bar Kit adds a dedicated tuning component for that area. Made for Virus 4.0/4.1 EP and GP platforms, the set brings a bent metal stabilizer bar together with ball-link ends, mounting pieces, a 2-part center holder and screws for installation at the front of the chassis. Instead of changing springs or dampers, a sway bar alters handling through the link between the left and right suspension sides. As the front suspension compresses unevenly in a corner, the bar resists that difference in movement and changes how the chassis settles through the turn. The ball-link ends support the connection to the suspension hardware, while the center clamp fixes the bar in position so the assembly can work as intended. That makes this set a focused option for replacement after wear or for tuning a Virus or Akuma setup around track conditions. On loose surfaces, high-grip sections or mixed layouts, front-end balance can be adjusted with a dedicated anti-roll bar rather than broader chassis changes. The compact hardware format also fits naturally into workshop stock for regular maintenance on compatible 14 Years+ RC models.  Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0/4.1 Rear Sway Bar Kit, RC spare part

€13.79

The Virus 4.0/4.1 Rear Sway Bar Kit adds a dedicated rear anti-roll linkage to compatible EP and GP chassis, bringing a more defined suspension setup to workshop builds and maintenance jobs. The set is arranged around a bent metal bar with black rod ends, silver collars, 2 central mounting blocks and 2 screws, forming the core parts needed for the rear assembly. Its layout is built around pivoting movement at the outer ends, while the centre section is secured by the 2 black clamp-style mounts. That combination gives hobbyists a clear mechanical setup with separate linkage and fixing points rather than a one-piece moulded part. As a model-specific spare part, it suits replacement work on an existing rear suspension assembly and also fits tuning-focused rebuilds where the correct hardware matters. The included collars sit near the outer sections of the bar and help position the assembly within the mounting layout shown for the kit. On the bench, the compact parts set works well for servicing a Virus or Akuma chassis without mixing unrelated hardware. Age marking: 14 Years. For enthusiasts maintaining compatible RC cars, this rear sway bar kit adds a focused suspension component that matches the stated model range.  Warning! Not suitable for children under 14 years.

Wishbones

Virus Akuma Rear Lower Suspension Arms, 2 pcs

€10.79

Rear suspension geometry has a direct effect on how an RC buggy tracks through corners, settles after jumps and keeps the wheel assembly aligned under load. This set provides 2 rear lower suspension arms for compatible Carson Virus and Akuma platforms, giving the exact replacement part for the rear axle area. The pair uses an open-frame structure with multiple cutouts and reinforced sections, as shown by the moulded arm shape. Each arm has a forked upper mounting section and a cylindrical hinge area for pin mounting on the chassis side, matching the connection layout used in these vehicle families. The set is intended for Virus 4.0, 4.1, 4.2, 4.3 and Race models, and also fits Akuma versions named in the data. As a dedicated spare part, it supports accurate maintenance of the suspension assembly without adapting unrelated components. In workshop use, the 2-piece set suits routine repair after wear, impact or drivetrain service work at the rear end. For hobbyists keeping a buggy ready for the next run, the matching pair makes it straightforward to renew both rear lower arm positions in one step.  Warning! Not suitable for children under 14 years.

Wishbones

Virus-Ex Lower Arms Kit Rear, RC spare part

€10.99

The Virus-Ex Lower arms kit rear is a dedicated RC spare part for rear suspension maintenance on the Virus-Ex platform. With 2 lower arms and 2 bushings, the set provides the core chassis parts needed when the rear suspension linkage needs replacement after wear, impact or a full rebuild. Each arm is shaped with reinforced cutout sections, end mounting holes and central fixing points that match the function of a lower suspension arm in the rear assembly. That layout matters during servicing, because the lower arm guides the wheel carrier through its movement and keeps the suspension geometry tied to the chassis mounting positions. As a matched pair, the 2 arms suit left and right installation at the rear rather than mixing universal loose parts into the setup. The included bushings complete the set for the specified mounting area. In workshop use, this kind of replacement set fits naturally into routine RC maintenance, whether a buggy is being repaired after a hard session or refreshed as part of a larger chassis overhaul. The compact parts format also makes the set practical to keep on hand in a spares box for trackside repairs or planned servicing between runs.  Warning! Not suitable for children under 14 years.

Wishbones

Virus-Ex Lower Arms Kit, model spare part

€10.69

The Virus-Ex Lower Arms Kit front includes 2 mirrored suspension arms for the front end of a Virus-Ex model, giving the chassis the correct left and right lower arm layout in one matched spare-parts set. The black moulded parts show an elongated triangular form with reinforced ribs, hinge barrel ends and shaped cutouts that define the arm structure. Each arm is built around the connection points needed in the suspension assembly, with several mounting holes and clearly formed pivot areas that support installation in the intended front position. The ribbed design adds structure across the arm body, while the cutout sections keep the shape precise around the mounting geometry. As a dedicated replacement set, these parts are suited to maintenance after wear, damage or a full rebuild of the front axle area. In workshop use, the pair can be kept as service parts for routine upkeep or fitted during a repair when the front suspension needs fresh lower arms. The matched left and right format also makes the set practical for restoring the front end with the correct corresponding components rather than mixing individual pieces.  Warning! Not suitable for children under 14 years.

Wishbones

Virus-Ex tie rod set, RC spare part, 4-piece

€14.69

The Virus-Ex tie rod set is a focused RC spare part for keeping a Virus Extrem chassis in running condition. Supplied as 4 upper front and rear tie rods, this set addresses a specific linkage area rather than a general hardware bundle, making it easier to replace the named parts with matching components for the stated platform. The product data names compatibility with Virus Extrem references 500409074 and 500409084. That clear fitment information matters when a repair calls for the correct geometry at the front or rear connection points. The supplied parts shown include black moulded linkage elements, metal rod sections and rod ends with circular mounting holes. This combination points to the kind of adjustable or fixed chassis linkage used around steering or suspension assemblies, where clean mounting and the correct part shape are essential for a tidy rebuild. In workshop use, the set suits routine maintenance after wear, damage or play in the linkage. It also fits parts-bin planning for hobby benches that keep model-specific replacements ready for service work on a Virus Extrem vehicle. The age marking in the data is 14 Years.  Warning! Not suitable for children under 14 years.

Wishbones

X 10 EB DirtWarrior Turnbuckle Holder Set

€11.99

The X 10 EB DirtWarrior Turnbuckle Holder set is a dedicated spare parts pack for the linkage area of the model, supplying 4 holders and 4 matching ball studs for front or rear installation. Its compact format focuses on one mechanical task: giving the turnbuckle assembly a defined mounting point where linkage parts need controlled movement and a clean connection. The black holders are shaped for RC model hardware, while the metal ball studs provide the pivot points needed for the mounted linkage. This combination is useful when an existing setup shows wear, after a hard impact, or during a planned rebuild of the steering or suspension area. Because the set is specific to the X 10 EB DirtWarrior, it supports maintenance with parts matched to the model rather than a generic workaround. The included quantity also covers multiple mounting positions in one repair cycle. On the workbench, the set fits naturally into routine servicing, chassis refreshes and targeted replacement of small but important connection parts. For hobbyists aged 14 years and up, it adds a practical stock component for keeping the model's front or rear linkage system ready for the next running session.  Warning! Not suitable for children under 14 years.

Wishbones

X 10 EB Dirtwarrior, suspension arm set

€16.99

The X 10 EB Dirtwarrior lower suspension arm and holder set is a dedicated spare parts pack for restoring the suspension layout of the matching RC model. With 4 wishbone-style arms, 2 holder parts, 4 bushings and 8 washers, the set covers the core hardware needed where the suspension connects to the chassis and linkage points. The arm shapes show reinforced cut-out sections and integrated hinge areas that support the guided movement of the running gear. Ball stud mounting points on the larger parts provide the connection points used by the linkage, while the included bushings and washers handle spacing and fit at the mounting positions. This makes the set useful for replacing worn parts after regular driving, correcting damage from hard landings, or keeping a rebuild aligned with the original component layout. As a model spare part for a 14 Years marking, this set suits workshop maintenance, race-day repairs and planned overhauls of the X 10 EB Dirtwarrior. The black finish matches typical chassis hardware and keeps the replacement visually consistent with the rest of the vehicle.  Warning! Not suitable for children under 14 years.

Wishbones

X 10 EB ROCK WARRIOR, suspension arm set

€22.49

The X 10 EB ROCK WARRIOR suspension arm set brings key chassis parts together for focused repair and maintenance on the matching RC model. The set combines suspension arms with holder components for the front and rear, supporting work on the wheel linkage area where clean pivot movement and stable mounting matter. The laid-out parts shown in the set include 4 long suspension arms, 2 holders, 4 small bushings or pivot inserts, and 8 washers or spacers. That mix gives a clear basis for replacing worn or damaged suspension hardware with matching components from one pack. The arm shape with geometric cutouts and hinge ends is made for the suspension linkage layout, while the holder parts sit at the mounting points that guide the arm position on the chassis. For hobby workbench sessions, this kind of spare set helps keep repair steps organised around the exact parts needed for the assembly area. Used during maintenance, rebuilds, or after hard running sessions, the set supports restoration of the front and rear suspension section without mixing unmatched hardware. Minimum age: 14 years.  Warning! Not suitable for children under 14 years.

Wishbones

X10EB Front Lower Suspension Holder Spare Part

€12.49

The X10EB Front Lower Suspension Holder is a dedicated spare part for the Carson X10EB and focuses on one of the key mounting areas at the front end of the chassis. As the front lower suspension holder, it provides the defined connection point needed for the matching suspension setup and supports accurate placement of the related front-end components during maintenance or repair. The set shown in the product data includes a black holder, a blue brace plate, 2 screws and 2 bushings. The holder uses a machined form with multiple drilled mounting holes, countersunk openings and a large central cut-out, while the brace plate adds a second metal element with 4 holes for the matching fastening layout. These details matter when worn or damaged parts need to be replaced with a component shaped for the original assembly area rather than a generic workshop part. In workshop use, this spare part suits rebuilds after heavy running, routine servicing or the correction of front-end damage on the X10EB. The dedicated fit keeps the focus on restoring the intended chassis structure, so the model can return to setup work, maintenance cycles and track-ready mechanical condition.  Warning! Not suitable for children under 14 years.

Wishbones

X10EB Suspension Arm Set, RC spare parts

€17.79

The X10EB Suspension Arm Set + Holder is a dedicated spare-parts set for RC model maintenance, built around the suspension area that guides wheel movement and supports controlled chassis action. With 4 suspension arms, matching holders, spacers and 2 screws, the set brings together the core parts needed when worn or damaged arm assemblies need replacing on the X10EB. The black arms are shaped as side-specific components and carry molded L and R markings, which helps keep front or rear installation aligned to the intended side. The layout combines larger arm sections with smaller retaining and mounting pieces, so the suspension assembly can be rebuilt with matching parts from one set. Two of the arms are shown with metal hinge pins already installed, adding a pre-positioned pivot element within the assembly. As a spare-parts set rather than a complete vehicle, it suits bench repairs, routine maintenance and the replacement of stressed running gear components after regular RC use. In workshop use, this set supports the kind of upkeep that keeps an RC chassis mechanically consistent through repeated driving sessions. Age marking: 14 Years. Batteries are not included.  Warning! Not suitable for children under 14 years.

Wishbones

XS Lower Arms Kit Rear, spare part for 1:10

€13.49

This rear lower arms kit is made for the Carson XS-Chassis in 1:10 scale and covers the rear suspension area with the parts named for the job. The set contains 2 lower arms, 2 holders and 4 pins for a direct match with the specified chassis platform. Compatibility is defined for Carson model numbers 500404252 Stadium Fighter blau, 500404253 Stadium Fighter orange, 500404254 Offroad Fighter Cage türkis and 500404255 Offroad Fighter Cage rot. That clear model allocation helps when planning maintenance, replacing worn rear-end parts or preparing a rebuild around the correct chassis family. As a spare part rather than a general accessory, the kit focuses on the connection points and support pieces used at the rear of the vehicle. In workshop use, a dedicated rear suspension set like this keeps repairs straightforward because the required lower arms, holders and pins are grouped in one package. It fits hobby benches that keep compatible XS-Chassis vehicles running, whether the job is routine servicing or replacing rear hardware after demanding off-road sessions.

Wishbones

Akuma Lower Suspension Mount Kit, RC spare part

soon available again

The lower suspension mount sits at a critical point in an RC chassis, where the wishbone holder and mounting geometry need to stay cleanly positioned for consistent assembly. This Akuma Lower suspension mount kit is made for the Carson Akuma and Virus platform and supplies 4 parts for that area, giving model-building enthusiasts the correct replacement set for service work or a rebuild. The set is described as a lower suspension mount kit and in the image shows multiple machined components with drilled holes, recessed fixing points and shaped cutouts that match chassis mounting tasks. These details matter during workshop use because the hole layout and part shape guide the components into their intended position within the suspension section. As a dedicated spare part rather than a general accessory, the kit focuses on one defined chassis function and keeps maintenance work specific to the compatible vehicle family. The visible mix of black and silver finished parts underlines the technical character of the set without adding unnecessary bulk to the assembly. In practice, this kind of replacement set fits naturally into routine RC ownership: worn or damaged suspension hardware can be exchanged during a repair session, and a chassis under rebuild can be brought back with matching lower mount components. The 14 years marking places the set in the hobby segment, where tuning, upkeep and precise parts changes belong to the driving experience as much as time on the track.  Warning! Not suitable for children under 14 years.

Wishbones

KoD Lower Arms Kit Rear, RC spare parts

soon available again

The KoD Lower arms kit rear brings the rear suspension area back into service with 2 moulded lower arms shaped as a left and right pair. Each arm carries its own L or R marking, so the orientation is clear during installation, and the mirrored layout matches the rear chassis position the set is made for. The black suspension arms use a braced lattice design with elongated openings across the main body. That structure reduces unnecessary mass in the part itself while keeping the full arm profile, the pivot ends and the mounting points intact. Smooth rounded edges and the formed hinge locations support a direct replacement role when worn or damaged rear arms need to be exchanged. As a rear-specific set, the kit focuses on the lower suspension link area rather than mixing positions from elsewhere on the chassis. In workshop use, the 2-piece layout covers both rear sides in one step, which suits routine maintenance, rebuilds after heavy running sessions or keeping matching spare parts ready in the pit box. Age 14+

Wishbones

1:10 Suspension Arms

only available from customer service

Carson 1:10 Suspension Arms (material number 500405797) are intended as spare parts for 1:10 scale models and are aimed specifically at model building enthusiasts. The suspension arms enable the targeted replacement of damaged components, facilitate maintenance and repair and are a useful addition for ambitious hobbyists.

Wishbones

1:10 Suspension Holder

only available from customer service

The Carson 1:10 Suspension Holder (item no. 500405798) is a component designed for 1:10 scale models for mounting the suspension. Model building enthusiasts will find it a functional spare part for repair and restoration that impresses with its clear practicality and supports the mounting of the suspension assembly.

Wishbones

BAD BUSTER 2.0 wishbone bracket set

only available from customer service

Wishbones

BAD BUSTER wishbone set f/h

only available from customer service

Wishbones

Control arm pins (4) NemeSys

only available from customer service

Control arm pins (4) for control arm set 404314-14 for the NemeSys 500404314

Wishbones

CY5 Control arm bracket

only available from customer service

Wishbones

CY5 Linkage set tie rods control arm

only available from customer service

Wishbones

FE-Line control arm/knuckle (2) rear

only available from customer service

Upper wishbone (2), lower wishbone (2), steering knuckle (2), retaining pins (4) rear axle

Wishbones

FE-Line lower wishbone (4)

only available from customer service

Lower wishbones 2x front and 2x rear axle

Wishbones

FE-Line upper wishbone (4) Off Road

only available from customer service

Upper wishbone 2x front and 2x rear axle

Wishbones

Front Upper/Lower Arms (2) CY-2

only available from customer service

Carson 500205646 Front Upper/Lower Arms (2) CY-2 are the front upper and lower wishbones for the Street Breaker CY-2. This set of two is an original spare part for the front axle and is aimed at model building enthusiasts who want to repair or maintain their CY-2 model. Original from Carson.   Warning! Not suitable for children under 14 years.

Wishbones

FY10 Front Lower Suspenion Arm l/r

only available from customer service

Carson 500405263 FY10 Front Lower Suspension Arm l/r Kit is the original spare part for the front lower wishbones (left/right) of the 1/10th scale DESTROYER DFFY. The L/R kit is aimed at demanding model builders who want to replace or repair their suspension true to the original; ideal as a spare part for maintenance and repair.   Warning! Not suitable for children under 14 years.

Wishbones

FY10 Rear Lower Suspension Arm l + r

only available from customer service

DESTROYER, DFFY 1/10 REAR LOWER SUSPENSION ARM L/R KIT

Wishbones

FY10 Steering arm front left+right, 2pcs

only available from customer service

500405261 Carson FY10 steering arm set for DESTROYER/DFFY 1:10 combines left and right in a practical two-piece kit and offers model builders precise steering and a robust connection to the front and rear axles. The precisely fitting arms enable uncomplicated replacement and restore exact steering characteristics for ambitious racers.   Warning! Not suitable for children under 14 years.

Wishbones

FY10 Upper Suspension Arm, 2 pcs

only available from customer service

500405255 - FY10 upper suspension arms (2 pieces) from Carson for DESTROYER/DFFY 1:10 offer model building enthusiasts a practical replacement and upgrade kit. The two upper suspension arms enable the targeted replacement of worn parts and ensure that the suspension geometry is restored true to the original; ideal for repair and maintenance.

Wishbones

FY10/8/5 Front Suspension Arm Pin, 8 pcs

only available from customer service

The FY10/8/5 Front Suspension Arm Pin 500405267 is an 8-piece set of front suspension pins, specially designed as a repair and replacement kit for DESTROYER DFFY 1/10. Model builders use the kit to replace defective front suspension pins and to restore the suspension so that your model remains ready for use.   Warning! Not suitable for children under 14 years.

Wishbones

FY10/8/5 Lower Suspension, front/rear

only available from customer service

500405269 - Lower suspension (front/rear), kit for DESTROYER DFFY 1/10. This complete set replaces the lower suspension parts of your Destroyer model and is specifically designed for the front and rear suspension of the 1/10 vehicle mentioned. Model builders benefit from a specially coordinated spare parts package for professional repair and maintenance.   Warning! Not suitable for children under 14 years.

Wishbones

FY10/8/5 Rear Suspension Arm Pin, 4pcs

only available from customer service

Carson FY10/8/5 Rear Suspension Arm Pin Kit 500405275 is a set of four rear suspension pins, especially for DESTROYER and DFFY 1/10 models. The kit serves as a spare part for the rear suspension and enables targeted repairs or replacement on the rear wishbones - a useful part for model building enthusiasts.   Warning! Not suitable for children under 14 years.

Wishbones

FY10/8/5 Suspension Arm Mount, 2 pcs

only available from customer service

Carson FY10/8/5 Suspension Arm Mount 500405257 is a 2-piece suspension mounting kit specially designed for DESTROYER and DFFY 1/10 models. As a spare part or upgrade, the set provides two suspension arm mounts and supports ambitious model builders in repair, maintenance or targeted tuning to restore the suspension function exactly.   Warning! Not suitable for children under 14 years.

Wishbones

FY10/8/5 Upper Suspension Arm Mount f/r

only available from customer service

The Carson 500405258 Upper Suspension Mount - Kit for FY10/8/5 models and DESTROYER DFFY 1/10 is a precision manufactured replacement part for mounting the front and rear upper suspension arms. It provides a snug fit, facilitates assembly and repair, and allows modelers to make safe, precise suspension upgrades.   Warning! Not suitable for children under 14 years.

Wishbones

FY8 Front Suspension Arms l/r (2)

only available from customer service

Carson FY8 Front Suspension Arms 500405313 are a set for the front axle (left/right, 2 parts) and are considered a replacement kit for the DESTROYER DFFY 1/8. Model building enthusiasts thus receive a precisely fitting replacement of damaged suspension parts to repair the vehicle true to the original. Ready for the next mission.   Warning! Not suitable for children under 14 years.

Wishbones

FY8 Rear Suspension Arm l/r (2)

only available from customer service

500405331 Carson FY8 Rear Suspension Arms (L/R) - Kit for DESTROYER DFFY 1:8. This kit contains 2 rear suspension arms (left and right) as replacement or exchange kit for the mentioned 1:8 models. Ideal for model builders who need original compatible components for their DESTROYER DFFY. Suitable for FY8 models.

Wishbones

FY8 Upper Suspension Arm (2)

only available from customer service

500405327 - FY8 Upper Suspension Arm (2) from Carson is a two-piece kit with upper wishbones for DESTROYER DFFY 1/8. For targeted replacement or performance upgrades, it restores the suspension geometry and ensures controlled handling. Model builders appreciate the precise fit and uncomplicated installation.

Wishbones

Lower left & right wishbone with NemeSys bracket

only available from customer service

Lower left and right wishbones with aluminum holder for the NemeSys 500404314

Wishbones

Shaft for suspension arm x8 CV/CE-10

only available from customer service

500405147 - Carson shaft for wishbone X8 CV/CE-10 is the precise spare part for model builders who rely on an exact fit and high load capacity. Robustly manufactured, it guarantees secure fastening and smooth axle movements, facilitates assembly and restores the reliable function of the chassis.   Warning! Not suitable for children under 14 years.

Wishbones

Shaft for wishbone mounting (8) CV-10B/T

only available from customer service

Carson 500105184 - Shafts for wishbone mounting (8) for CV-10B/T offer model builders precisely fitting spare parts for buggies and truggies. Eight identical shafts make it easy to replace the suspension connections and ensure stable function and long-term readiness for use. For enthusiasts who value precision and reliability.

Wishbones

Suspension arm 2x2 CV/CE-10

only available from customer service

500405141 Carson Suspension Arm 2x2 CV/CE-10 is a custom-fit replacement and upgrade part for CV/CE-10 models in TIIGHTEND design. Model building enthusiasts appreciate the precise guidance of the wheel suspension, simple installation and the possibility of restoring the handling and durability of their chassis in a targeted manner.   Warning! Not suitable for children under 14 years.

Wishbones

Suspension arm-set front/rear CV-10

only available from customer service

Carson 500105287 - Suspension arm set for front and rear axle of the CV-10 combines functionality and replacement convenience for model building enthusiasts. As a direct replacement for the part number 500105114, it enables targeted replacement during repair or upgrade and helps to maintain the handling and operational readiness of your model.   Warning! Not suitable for children under 14 years.

Wishbones

Suspension holder set CV Buggy

only available from customer service

Carson Suspension Holder Set CV Buggy (500105290) is aimed at model building enthusiasts who want to work precisely on the suspension of their CV Buggy. The CV Buggy Suspension Holder Set serves as a replacement and equipment component for maintenance, repair or targeted conversion and facilitates plannable, clean interventions on the chassis.

Wishbones

V4 Truggy Lower Suspension Mounts

only available from customer service

Carson V4 Truggy Lower Suspension Mounts (500405808) are the lower mounting points for the wheel suspension of the V4 Truggy. This provides model building enthusiasts with a specific spare part for maintenance or for replacing damaged parts. This allows the suspension to be maintained in a targeted manner and ensures the operational readiness of the V4.

Wishbones

V4 Truggy Suspension Arm Real

only available from customer service

500405817 - Carson V4 Truggy Suspension Arm Real is the original swing arm for V4 Truggy models and appeals to model building enthusiasts who want to precisely repair or upgrade the suspension and handling. As a precisely fitting spare part, it ensures simple installation and reliable function in remote-controlled vehicles.

Wishbones

V4 Truggy Suspension Arms front

only available from customer service

The Carson material number 500405832 designates the V4 Truggy Suspension Arms front, the front wishbones for the V4 Truggy. Model building enthusiasts will find a specific component here for repairing or supplementing the chassis; precise fit and clear alignment to the front axle make repair and maintenance easier.

Wishbones

V4 Truggy Upper suspension Arms front

only available from customer service

500405811 Carson V4 Truggy Upper suspension Arms front - original upper suspension arm set for the V4 Truggy from Carson, specifically for remote-controlled ground vehicles. The spare part enables uncomplicated replacement on the front axle, retains the standard suspension geometry and appeals to model builders who appreciate components that are true to the original.

Wishbones

Wishbone holders f/r CV-10B/ T

only available from customer service

Carson Wishbone holder 500105178 for CV-10B/T: Spare part for model builders looking for a precise replacement or repair. Compatible with the CV-10B and CV-10T models, it serves as a bracket for the wishbones and enables the targeted replacement of damaged brackets - ideal for repairs in model making.

Wishbones

X10E Full Turnbuckle Set

only available from customer service

Wishbones

X10EB Suspension Armholder Set

only available from customer service

Wishbones

X10EB Suspension C-Hub Pin

only available from customer service

Carson X10EB Suspension C-Hub Pin 500405668 is the custom-fit replacement part for the Stunt Warrior that reliably guides suspension movement. Precisely manufactured for easy installation and long-lasting operation, it enables targeted repair or performance optimization and appeals to model builders who value fit and robustness.   Warning! Not suitable for children under 14 years.

Wishbones

X10EB Suspension Pin + C-Hub Pin

only available from customer service

500405350 - X10EB Suspension Pin + C-Hub Pin from Carson: X10EB suspension arm and steering knuckle pins for the X10EB model. Model building enthusiasts appreciate this original spare part for the targeted renewal of wishbones and steering knuckles. Clear designation and specific compatibility support the selection of suitable suspension components for your X10EB.   Warning! Not suitable for children under 14 years.

Wishbones

X10EB Suspernionarmset+Holder

only available from customer service

Carson X10EB Suspension Arm Set + Holder 500405682 is the spare parts set with holder that is specially designed for the Stunt Warrior. This complete arm set enables targeted repairs and upgrades to the chassis. Model builders will find perfectly fitting replacements from Carson that simplify maintenance and adjustments and allow the model to continue to be used quickly.   Warning! Not suitable for children under 14 years.

Wishbones

X10ET-XL Upper Turnbuckle Holder F/R

only available from customer service

Carson X10ET-XL Upper Turnbuckle Holder F/R (500405650) is an original spare part for the X10ET-XL chassis and holds the upper turnbuckles on the front and rear axles. Model building enthusiasts benefit from the targeted interchangeability during repair and maintenance when it comes to a clean chassis connection and precisely fitting spare parts supply.

Wishbones

X5 control arm (2) rear with small parts

only available from customer service

Wishbones

X5 control arm bracket set

only available from customer service

Wishbones

X5 Inst. disk Crossl. / Servoh.

only available from customer service

Wishbones

X5 Lower wishbone bracket pins (4)

only available from customer service

Wishbones

X5 Stabi Set

only available from customer service

Wishbones

X5 upper front wishbone (2)

only available from customer service

Wishbones

X5 upper rear wishbone (2)

only available from customer service

Wishbones

X5 wishbone pin front/rear bottom

only available from customer service

Wishbones

X5ET-B/GT-B Front Suspension Mount (2)

only available from customer service

The 500405226 X5ET-B/GT-B front suspension mount in a set of 2 from Carson is an original spare part for the DIRT ATTACK XXL. Model building enthusiasts receive two matching suspension mounts to replace the front suspension, ideal for restoring the original compatibility and fit.   Warning! Not suitable for children under 14 years.

Wishbones

X5ET-B/GT-B Rear wheel axle (2)

only available from customer service

500405216 X5ET-B/GT-B rear wheel axle (2) from Carson is the genuine M6 wheel axle for DIRT ATTACK XXL. The set of two provides original rear axles for X5ET-B/GT-B models and complements repair or build-up projects with authentic components. Robust and precisely manufactured for true-to-original restoration.