Pinions & gears

1:10 XS Pinion Gear 21T, spare gear

€5.99

A 21T pinion gear in module 0.5 brings the drivetrain back into service on Carson XS-Chassis 1:10 vehicles. The compact drive part uses straight teeth and comes with an M3 screw, so the gear and its matching fastening hardware are supplied together for a direct replacement task. This spare gear is listed for Carson XS-Chassis references 500404252, 500404253, 500404254 and 500404255. The fitment list also names 500404360, 500404361, 500404362 and 500404363, covering Stadium Fighter, Offroad Fighter Cage, Tekuro and Ryken variants within the XS-Chassis range. The side hub fixing point shown on the gear works with the included screw to lock the part onto the shaft. That makes the component useful when drivetrain wear, damage or routine servicing calls for a fresh pinion. In workshop use, the small format suits the parts tray, pit box or spares case for quick maintenance between running sessions. Age marking: 14 years.

Pinions & gears

1:8 BL 13T Steel Pinion Gear, model accessory

€10.79

In 1:8 model racing, small drivetrain parts shape how power reaches the wheels. This BL 13T Steel Pinion Gear hard is a compact transmission component for brushless 1:8 setups, built to sit on the motor shaft and pass rotation into the geartrain through its 13-tooth profile. The gear combines a central bore with a side fastening point, a layout that supports fixed mounting in the drive assembly. That construction matters during servicing, because a pinion must sit in the correct position to engage the matching gear evenly. The steel specification given in the data places the focus on the working surface that handles direct tooth contact. As a dedicated replacement or workshop spare, this part belongs in rebuilds, routine maintenance and gearing updates where worn drivetrain hardware needs to be exchanged with the correct tooth count. On the bench, the pinion fits naturally into motor and transmission work on 1:8 brushless models. In running setups, it serves as the small but essential link between motor output and the rest of the drivetrain, making it a useful component to keep ready for repairs and setup changes.  Warning! Not suitable for children under 14 years.

Pinions & gears

1:8 BL 14T Steel Pinion Gear, RC accessory

€10.79

In 1:8 brushless model driving, small transmission parts have a direct effect on how power reaches the wheels. This 14T steel pinion gear is made as a compact RC accessory for compatible 1:8 BL setups, where the tooth count becomes part of the gearing choice. The steel construction places the focus on a core drivetrain component rather than a cosmetic add-on. As a pinion gear, it sits at the motor side of the transmission and works with a matching spur gear to pass rotation into the rest of the drive system. The 14-tooth layout is a concrete specification for repair work, replacement of a worn gear, or a deliberate gearing change within an existing setup. The product image also shows a central threaded opening and a perpendicular threaded side hole, indicating a fastening arrangement designed for mounting on a shaft with a set screw. This kind of workshop part suits bench maintenance, rebuilds after heavy running, and targeted tuning of compatible RC vehicles. The age marking is 14 years+, matching its role as a technical hobby component within model-building and RC maintenance.  Warning! Not suitable for children under 14 years.

Pinions & gears

1:8 BL 15T Steel Pinion Gear, RC spare part

€10.79

In 1:8 brushless RC setups, the pinion is the small part that sets the first link in the drivetrain. This BL 15T Steel Pinion Gear uses 15 teeth and a steel body to mesh with the main drive gear in compatible model vehicles, giving hobby work a concrete, mechanical focus right at the motor shaft. The gear form shown in the data is built as a compact cylindrical pinion with straight outer teeth, a central bore and a side threaded hole for fastening. That layout allows the pinion to sit on the shaft and be fixed in place with a grub screw, an important detail when the motor's rotation has to transfer cleanly into the transmission. The 15T specification also matters in workshop planning, since tooth count is one of the key figures used when replacing a worn pinion or matching a drivetrain setup to an existing spur gear. As a steel spare part, it fits naturally into maintenance, repair and tuning work on 1:8 brushless RC models. On the bench, this kind of component is used during drivetrain service, rebuilds or gearing swaps where a fresh pinion restores proper meshing between motor and transmission. Age marking: 14 Years.  Warning! Not suitable for children under 14 years.

Pinions & gears

1:8 BL 16T Steel Pinion Gear, model accessory

€10.79

A small drivetrain part can make a clear difference in how a 1:8 brushless model puts power down. This BL 16T steel pinion gear is built as a dedicated model accessory for RC vehicle transmissions, with 16 teeth forming the drive interface between motor and spur gear. The gear uses steel for the toothed section, giving this heavily loaded contact point a material suited to repeated meshing in fast-running setups. Its compact cylindrical form keeps the part focused on the job of power transfer rather than adding bulk to the motor mount area. The central bore fits over the motor shaft, while the side fixing point is designed for a fastening screw that locks the pinion in place. That combination supports accurate positioning on the shaft and a direct mechanical link from the motor into the rest of the drivetrain. The 1:8 scale reference places it in the class of larger RC models where gearing choice plays a practical role in setup and maintenance. Whether used as a replacement for a worn gear or as part of a drivetrain change, this 16T pinion belongs in the workshop stock for compatible brushless RC vehicles. It suits rebuilds, routine servicing and gearing adjustments where a specific tooth count is needed to match the transmission layout.  Warning! Not suitable for children under 14 years.

Pinions & gears

Akuma Pinion Gear 14T Model Accessory

€6.89

The Akuma Pinion Gear 14T is a drivetrain accessory for compatible Akuma model vehicles, built around a clear 14-tooth specification that helps identify the correct replacement or maintenance part within an RC setup. In workshop use, that concrete tooth count gives hobbyists a direct reference when checking an existing transmission configuration or preparing a repair. As part of the model supplies range, this gear suits routine servicing, parts organisation and planned spares stocking for RC vehicles in the Akuma line. The product data identifies it as a separate accessory rather than a complete vehicle, which makes it relevant for ongoing upkeep of a running model. The designation Motor Pinion 14T points to its role in the drive system, where a pinion gear forms part of the connection between motor output and the rest of the drivetrain. The listed references 500409082 and 500409083 link the gear to the Akuma context named in the data. On the hobby bench, a dedicated replacement gear helps keep maintenance focused and parts selection straightforward when an existing drivetrain needs attention. The 14 Years age marking is stated in the product data, placing this accessory in the model-building and RC hobby segment.  Warning! Not suitable for children under 14 years.

Pinions & gears

Drakuro Bevel Gears, drivetrain spare part

€12.99

This spare part set is built around a clear drivetrain task: bevel gears for the center, front and rear drive shafts of the Drakuro 1:8 4WD chassis. With 2 pieces in the set, it covers a defined transmission area for maintenance work on the named vehicle platform and keeps the replacement focused on the parts that matter for this section of the drive layout. The fitment information is specific to the Carson Drakuro BL 3S variants 500409096 in Anthracite/Red and 500409097 in Blue. That makes the set a precise choice for model-building enthusiasts working on those versions rather than a generic gear listing with unclear application. In a 4WD layout, the center and axle drive sections depend on correctly matched drivetrain parts, so a dedicated bevel gear set helps keep servicing work aligned with the original chassis design. The short format also suits workshop storage, where model-specific replacement parts are easier to sort and identify during rebuilds. Whether the task is routine maintenance, replacing worn transmission parts, or preparing spares for future running sessions, this set supports focused repair work on the Drakuro platform. It fits naturally into a bench setup for RC maintenance, where chassis-specific parts save time when the drivetrain needs attention.  Warning! Not suitable for children under 14 years.

Pinions & gears

Drakuro Center Differential, RC spare part

€41.99

The center differential with spur gear is a dedicated drivetrain spare part for the Drakuro platform from Carson Modelsport. Listed for the 1:8 4WD chassis and described as a center differential with main gear, it targets the transmission area where power is managed within the named vehicle layout. As a models supplies component, this part is intended for repair, servicing, or replacement work on the specified chassis rather than as a universal fitment. The data links it directly to the Drakuro BL 3S series, including the Anthracite/Red version 500409096 and the Blue version 500409097, which helps place the part within the correct vehicle family. The combination of center differential and spur gear identifies a core drivetrain assembly used in the middle section of the chassis. In workshop use, this kind of replacement part supports planned maintenance after regular running sessions or the renewal of worn transmission components on the matching Drakuro model. For hobby benches focused on keeping a 1:8 4WD vehicle ready for the next outing, the named chassis reference gives a clear platform match.

Pinions & gears

Drakuro Differentials Front and Rear Set

€49.99

The Drakuro differential set covers both key drivetrain positions with 2 units for the front and rear of the chassis. Named in the data as Drakuro Differentials front and rear, this spare part set is aimed at 1:8 4WD running gear where the transmission layout depends on a differential at each axle. Within a 4WD chassis, the differential is the component that distributes drive across the axle while the model is under power. Replacing worn transmission parts can restore the mechanical basis the chassis was designed around, especially when both axle positions are serviced together rather than one side at a time. The set format keeps the front and rear assignment clear and suits maintenance work focused on the drivetrain rather than body or electronics parts. The product data identifies the pair specifically for the Drakuro platform, making the application more precise than a generic RC spare. This kind of replacement set fits naturally into workshop stock for repair, scheduled servicing, or rebuilding a used chassis. For hobbyists working on a Drakuro 1:8 4WD model, the 2-piece layout provides the core differential parts needed for the front and rear transmission positions in one purchase.

Pinions & gears

Drakuro Main Gear, RC spare part, 57T steel

€12.99

The Drakuro main gear is a dedicated RC spare part for the Drakuro platform, specified here as a steel spur gear with 57 teeth. That exact tooth count matters in drivetrain service, because it preserves the stated gearing layout instead of substituting a different ratio. For model-building enthusiasts, this is a focused workshop part with a clear role inside the transmission. The data links the gear to a 1:8 4WD chassis, which gives the part a concrete platform reference for maintenance and replacement work. Rather than a mixed bag of hardware, this spare centres on one drivetrain component, making it easier to identify during repairs or scheduled upkeep. The steel material gives the part a precise technical identity in the copy and helps separate it from generic gear listings that omit the actual construction. The naming in the data also connects it to the Drakuro range, supporting a more exact search when the original main gear needs to be replaced. In practical use, this gear suits bench work on a Drakuro chassis when the transmission is being refreshed or a worn spur gear is being exchanged. It also fits parts stocking for hobby workshops that keep key drivetrain components ready for the next service interval.  Warning! Not suitable for children under 14 years.

Pinions & gears

Drakuro Motor Pinion Gear, accessory, 12T

€8.49

The Drakuro Motor pinion gear is a steel drivetrain spare part built around a clear specification: 12 teeth, a 5 mm bore and a grub screw for fastening on the motor shaft. For compatible 1:8 4WD chassis layouts, that combination gives model-building enthusiasts a defined replacement choice when the original pinion needs to be exchanged. The steel construction focuses this part on the drive system, where tooth count and bore size need to match the installed setup. The grub screw secures the pinion on the shaft, while the 12T format provides the stated gearing reference for maintenance or repair. The product data also links this part to Drakuro BL 3S vehicle versions in anthracite/red and blue, which helps place it within the Drakuro range without overstating compatibility beyond the stated information. In workshop use, this kind of spare part belongs in routine drivetrain servicing, rebuilds after wear, or a direct replacement during ongoing running sessions. For hobby benches that stay organised by exact dimensions and tooth counts, the 5 mm bore and 12T layout make this gear easy to identify within a parts stock.  Warning! Not suitable for children under 14 years.

Pinions & gears

KoD Bevelgear Joint Cup, spare part set

€15.89

Small drivetrain parts make a decisive difference when a model's transmission needs accurate mechanical engagement, and this KoD Bevelgear Joint Cup set focuses exactly on that task. The set contains 2 compact metal components: a bevel gear with angled teeth and a matching joint cup, both intended as replacement parts for Carson Modelsport KoD applications. The bevel gear is shaped to transfer rotational force through a meshing drivetrain layout, where the angled tooth form supports the change of direction typical of this gear type. Alongside it, the joint cup adds the matching connection element for the relevant assembly point. The cylindrical cup form, central opening and side detail shown in the product data indicate a part designed to seat and connect within a compact drive system rather than serve as a decorative add-on. For maintenance work, that means a focused replacement set built around the actual moving interface. This kind of spare part suits workshop tasks such as repairing worn transmission sections, refreshing a used drive assembly, or keeping a KoD model ready for further running sessions. The metal construction matches the technical role of both parts, where tooth contact, fit and connection points matter more than cosmetic detail.

Pinions & gears

KoD Center Differential 46T Drivetrain Part

€41.99

The KoD Center differential 46T brings a core transmission element into the workshop for model-building enthusiasts working on drivetrain maintenance. Its 46T gear sits around a central differential housing with a shaft running through the assembly, creating the mechanical basis for rotational transfer within a compatible model system. The technical drawing shows a large spur gear combined with a cylindrical centre section, plus upper and lower slotted shaft ends for coupling into matching parts. A circular flange with 3 evenly spaced holes adds a defined mounting point, while the shaped cutouts on both shaft ends indicate a keyed connection rather than a plain round axle. This makes the assembly relevant for repairs where a worn or damaged centre drivetrain unit needs to be exchanged for a like-for-like component. The compact one-piece layout also keeps the gear, housing and shaft interface together in a single assembly. In a rebuild, service, or replacement context, this differential fits naturally into the parts bench alongside other transmission components. The age marking is 14 Years. Batteries are not included.

Pinions & gears

KoD Differential Front Rear Drivetrain Part

€41.99

The KoD Differential front/rear is a dedicated drivetrain component for compatible Carson Modelsport assemblies, designed for use at the front or rear position where rotational force needs to be transferred through the running gear. Its enclosed cylindrical form combines the central mechanism with a clearly defined outer gear ring, creating the interface needed for meshing with the surrounding transmission layout. A broad top flange with evenly spaced mounting holes provides the basis for installation in the matching assembly, while the slotted shaft ends define the connection points for adjoining drive parts. This layout suits repair work, maintenance, or the replacement of a worn drivetrain element in an existing model. The compact mechanical format keeps the function focused on transmission and fit rather than cosmetic detail. In workshop use, the part supports the restoration of a front or rear drive section where a compatible differential is required. For model-building enthusiasts working on Carson Modelsport vehicles, it adds a specific drivetrain component that can be integrated into the existing mechanical setup. Age marking: 14 years+

Pinions & gears

Pinion Gear 10T, RC spare part, module 0.8

€5.79

A small change in the drivetrain can alter how an RC model puts power down, and this steel pinion gear brings that adjustment into a compact 10T format. With module 0.8 teeth, it is built for compatible drive systems that require this exact gear size and tooth profile. The gear is designed as a technical spare part for model maintenance, repair, or setup changes. Its steel construction focuses on the working surface that matters most: the toothed outer ring that meshes with the matching gear in the transmission. A central threaded bore and a side hole are provided for mounting, and the included set screw fixes the gear onto the shaft. That fastening method supports quick replacement when a drivetrain is being serviced or reconfigured around a different ratio. In use, the key requirement is compatibility: module 0.8 and 10 teeth must match the existing drivetrain layout. This makes the gear a practical choice for workshop stock, routine wear replacement, or targeted tuning on RC vehicles that use this specification. Age 14+  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 12T, RC spare part, module 0.8

€5.89

A small pinion gear plays a central role in how an RC drivetrain delivers power, and this 12T version is built for that exact task. With module 0.8 teeth and a steel body, it is made for model setups that rely on clean gear engagement and a defined transmission ratio. The gear uses a threaded centre bore and comes with a separate black set screw, so the pinion can be fixed onto the shaft with a direct mechanical connection. That fastening method supports accurate placement during assembly or replacement work and helps keep the gear aligned in the drive system. As a dedicated spare part, it suits repairs where a worn pinion needs to be exchanged for the same tooth count, and it also fits tuning work that depends on specific drivetrain components rather than general-purpose hardware. The compact metal construction matches the technical character expected from RC workshop parts. On the bench, this kind of component matters when rebuilding a transmission, refreshing a used model or sorting parts for a fresh drivetrain setup. The 14 Years age marking places it clearly in the hobby category, where exact specifications such as 12T and module 0.8 are part of choosing the right gear for the job.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 12T, steel gear for model drive

€5.49

A pinion gear is one of the small parts that has a direct effect on how a model drive feels in use, and this steel version combines module 0.6 gearing with 12 teeth for compatible RC and model drivetrain setups. The silver-coloured gear body is paired with a separate black grub screw, creating a compact replacement part for service, repair or drivetrain maintenance. The cylindrical gear form carries straight external teeth, a central bore and a side threaded hole for fastening. Once fitted to the motor shaft with the grub screw, the pinion works as the driving gear that meshes with the matching spur gear in the transmission. That interaction is what passes motor output into the rest of the drivetrain, so the tooth count and module matter when replacing a worn part or matching an existing setup. The steel construction makes it a focused choice for hobby work where fit and clean engagement are the priority. In workshop use, this part suits routine maintenance, drivetrain refreshes and rebuilds on compatible models. The 14 years marking is stated in the product data. For model-building enthusiasts, a small transmission part like this can be the detail that brings a drive system back into proper running order after wear or a gearing change.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 13T, model accessory, steel 0.8

€5.99

A pinion gear is one of the small parts that shapes how power moves through a model drivetrain, and this version combines a steel build with module 0.8 gearing and 13 teeth for a clearly specified replacement or workshop component. The compact form, silver-coloured machined finish and separate grub screw point to a part made for precise mechanical installation in RC model assemblies. The gear uses straight teeth around the lower section and a central bore through the body, so it can sit on a motor shaft or similar drive point and mesh with the corresponding transmission gear. A threaded side hole takes the black grub screw, which locks the gear onto the shaft once the position is set. That fastening method supports accurate placement during servicing, ratio changes or worn-part replacement. For hobby benches that keep common drivetrain spares ready, a 13T pinion fills a specific gearing slot rather than acting as a generic substitute. In use, this kind of component suits rebuilds, maintenance sessions and drivetrain tuning where the existing module must be matched correctly. It also works as a straightforward spare for models already set up around module 0.8 gearing, keeping repair work focused on fit, tooth count and secure fastening.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 13T, model accessory, steel M0.6

€5.59

A small change in gearing can alter how a model drive system comes together, and this pinion gear is built around that exact task. The steel gear uses module 0.6 teeth and a 13T layout, giving hobby setups a clearly defined replacement or tuning part for compatible drivetrains. The gear is shown with straight teeth, a central bore and a threaded side hole. That construction points to shaft mounting, with the included grub screw fastening the gear onto the matching shaft position inside a motor or transmission assembly. For maintenance work, worn drivetrain parts can be swapped without changing to a different module, and for setup changes the 13-tooth format provides a specific gearing option rather than a generic spare. The compact metal construction also suits parts storage alongside other workshop essentials for RC and model servicing. On the bench, this kind of component fits naturally into rebuilds, repairs and routine drivetrain checks where exact fit matters more than broad compatibility claims. The age marking in the data is 14 years, matching its role as a technical model accessory for hobby use.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 14T, RC spare part, module 0.8

€6.39

Small drivetrain parts decide how cleanly power reaches the wheels, and this steel pinion gear brings that focus down to a clearly specified 14T format with module 0.8. The machined metal form, central mounting bore and separate grub screw create a compact RC spare part built for shaft mounting in geared model systems. The 14-tooth layout defines the gearing at the motor side and makes this component a targeted choice when maintaining or replacing a worn drive part. Its toothed lower section is designed to mesh with a matching gear, transmitting rotational force from the shaft into the next stage of the drivetrain. The hub section provides the mounting point, while the black screw secures the gear on the shaft as part of the assembly. The steel construction suits the mechanical role of a pinion in RC model transmissions where fit, tooth form and secure fastening all matter. In workshop use, this spare part supports routine servicing, drivetrain repairs and ratio-specific replacement jobs on RC models. It also fits neatly into a parts stock for hobby benches where commonly used transmission components need to be ready for the next rebuild or repair.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 14T, RC spare part, steel M0.6

€5.99

A small change in gearing can noticeably alter how an RC model puts power to the ground, and this steel pinion gear brings that adjustment into a compact drivetrain part. With module 0.6 and 14 teeth, it is built for compatible gear trains where the motor shaft drives the spur gear through a defined tooth profile. The steel construction makes this a dedicated mechanical component for repair, maintenance or drivetrain setup work, while the side bore and included set screw provide the fixing point on the shaft. In use, the pinion sits directly at the motor output and transfers rotational force into the transmission, so the tooth count becomes a practical setup detail rather than just a number. A 14T pinion can be used when an existing gear needs replacement with the same specification or when a compatible model calls for this exact module and tooth count. On the workbench, it fits naturally into rebuilds, routine servicing and parts-box preparation for RC running gear. In a workshop setup for hobby projects, the separate screw and compact format keep the focus on one essential task: mounting the gear correctly and restoring a compatible drivetrain to working order.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 15T, RC accessory, steel module 0.8

€6.79

A pinion gear is one of the small parts that directly shapes how power reaches the drivetrain, and this 15T version is built for that exact task in RC model setups. The steel gear uses module 0.8 teeth, giving model-building enthusiasts a clearly defined replacement part for transmission work, repairs, and rebuilds. The compact gear body combines a toothed lower section with a central mounting bore and a side threaded hole for fastening. A set screw is included and secures the gear on the shaft, so the part can be fitted where a worn or damaged pinion needs to be replaced. The machined tooth form is designed for meshing with a matching gear standard, which matters when maintaining smooth power transfer in hobby drivetrains. Instead of a general hardware part, this is a dedicated RC transmission component with a specific 15-tooth count and module 0.8 format. On the workbench, that makes it useful for routine maintenance, drivetrain refreshes, and keeping compatible models in running order. Age 14+ is stated in the product data. Whether the task is replacing a used gear or preparing parts for the next rebuild, this steel pinion belongs in the core stock of RC workshop spares.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 15T, RC spare part, steel module 0.6

€6.09

A 15T pinion gear with module 0.6 adds a core drivetrain part to RC model work, pairing a steel body with a compact format made for precise mechanical engagement. The straight tooth profile, centred bore and threaded side hole show a layout built to mount on a shaft and transfer motor output into the transmission. The separate grub screw is included for fastening, so the gear can be fixed directly through the side thread instead of relying on a press fit alone. That construction supports controlled installation in compatible assemblies where the tooth count and module need to match the existing gear train. As a replacement part, the 15-tooth format can restore a worn drive connection; as a tuning part, it provides a defined gearing option for model builders working on drivetrain setup. The steel construction also makes it a clear choice where a metal pinion is specified in the build. On the workbench, this gear fits naturally into maintenance, rebuild and upgrade tasks around RC transmissions and motor mounts. It suits hobby projects that call for a compact pinion with module 0.6, a secure screw fixing and a clearly defined 15T configuration.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 16T, RC spare part, Module 0.6

€6.19

A small drivetrain part can make a clear difference in how an RC model is set up, and this pinion gear brings that focus down to the essentials with a 16-tooth layout, module 0.6 sizing and steel construction. The separate black set screw is included for mounting the gear on a shaft, matching the compact, workshop-oriented character of a true replacement component. The toothed lower section and central bore show its mechanical role at a glance: this gear is made to sit in the drive system and transmit motor force into the rest of the transmission. For model-building enthusiasts, that makes it useful both in routine maintenance and in gearing changes where a specific tooth count is required. Steel gives the part a clear technical profile for repeated use in compatible RC assemblies, while the defined module 0.6 format helps match it to the intended drivetrain standard. On the bench, it fits naturally into repair sessions, rebuilds and tuning work on RC vehicles and other compatible model drive systems. The 14 Years age marking is stated in the product data, and the compact format keeps the focus on one exact task within the transmission: secure fitment and controlled gear engagement.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 16T, RC spare part, Module 0.8

€6.89

A 16-tooth pinion gear in module 0.8 brings a key drivetrain detail into RC workshop maintenance. The steel construction suits use as a replacement transmission part where clean tooth engagement and a defined gear size matter in a compatible setup. The gear is designed for shaft mounting, with a central bore and a threaded side hole that takes the included set screw. This fastening method allows the pinion to be fixed on a compatible motor shaft so torque can be passed into the gearbox. The straight-tooth profile and compact hub shape make the part easy to identify when matching an existing drive layout or replacing a worn gear in a model already in service. Age 14+ is stated in the product data. In hobby use, this kind of spare part belongs on the bench alongside routine drivetrain servicing, rebuilds and ratio adjustments on RC models. It suits enthusiasts who keep compatible vehicles running with the correct mechanical parts and want a clearly specified 16T steel pinion for module 0.8 applications.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 17T, RC spare part, module 0.6

€6.69

A 17T pinion gear with module 0.6 brings a concrete tuning and maintenance part to the drivetrain of compatible RC models. The steel gear is built for the job of transferring motor output into the transmission, while the compact form and straight-tooth layout suit precise engagement with the matching gear size and module. The central bore is paired with a side threaded hole, and the included grub screw fixes the gear onto the motor shaft for a defined mechanical connection. That makes this spare part useful both when replacing a worn gear and when changing the tooth count within a compatible setup. In workshop use, a pinion like this directly affects how the motor feeds power into the rest of the drivetrain, so the 17-tooth specification is a meaningful detail for setup planning. The steel material keeps the focus on a classic transmission component used in many hobby-grade drive systems. On the bench, the gear fits naturally into routine service work, rebuilds and drivetrain adjustments for RC vehicles and model applications that use module 0.6 gearing. Age marking: 14 years. The included grub screw completes the mounting hardware needed for installation on a compatible shaft.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 18T, model accessory, steel 0.6

€6.79

A compact drivetrain part can change how a model puts power to the ground, and this steel pinion gear does exactly that with module 0.6 teeth and an 18T layout. The machined metal form and cylindrical hub create a focused, technical look that suits workshop benches, maintenance sessions and fresh gearing setups alike. As a model accessory, the gear is built for use in compatible drivetrain assemblies where tooth count and module need to match the rest of the transmission. The 18-tooth configuration offers a concrete gearing choice for tuning or replacement work. Steel construction gives this component the material specification stated in the data, while the separate grub screw forms part of the mounting system shown for the hub. The central bore and side fixing point indicate a shaft-mounted design that is secured mechanically rather than clipped into place. That makes the part relevant for repair jobs, routine servicing and planned drivetrain changes on hobby models. On the bench, the small format is easy to handle alongside other transmission parts during fitting and adjustment. In running setups, a correctly matched pinion like this becomes one of the key links between motor output and the rest of the gear train. Age marking: 14 years and up.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 18T, RC drivetrain gear, module 0.8

€7.29

A pinion gear is one of the smallest parts in an RC drivetrain, yet it has a direct effect on how motor power reaches the transmission. This steel version uses module 0.8 gearing and 18 teeth, giving model-building enthusiasts a clearly defined spare or replacement part for compatible RC applications. The gear is made as a shaft-mounted drive component with straight teeth, a central bore and a side threaded hole. A separate set screw is included for fastening the gear onto the shaft, so the connection between motor and drivetrain can be secured during repair or setup work. The compact format makes it easy to keep on hand in a spares box for workshop use, whether the task is replacing a worn gear, restoring a transmission, or preparing a planned gearing change. The steel construction suits the mechanical role of a pinion in repeated drive engagement. In practice, this 18T gear fits naturally into bench work around RC vehicles and other compatible model drivetrains where module 0.8 is required. Age marking: 14 Years. As a focused transmission part, it supports maintenance sessions, rebuilds and parts-based tuning with a concrete, easy-to-identify specification.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 19T, RC accessory, Module 0.6

€6.89

A pinion gear is one of the key parts that defines how power reaches the drivetrain, and this steel version brings a clear specification for RC maintenance and setup work. With module 0.6 and 19 teeth, it is intended for model applications that require that exact gear size and tooth profile. The gear is shown as a compact metal drive component with straight teeth, a central bore and a side threaded hole. That layout allows the gear to sit on a motor shaft and be secured with the supplied grub screw, so the drive can transfer rotation into the transmission with the intended mesh. For hobbyists working on repairs, replacements or gearing changes, the exact 19T count is the practical detail that determines compatibility with the matching spur gear and drivetrain layout. The steel construction makes it a focused choice for RC workshop stock where a specific module and tooth count are needed. On the bench, this kind of part is used during drivetrain servicing, when an existing pinion is replaced or a setup is changed to alter the gearing ratio of a model. It also suits spare-parts storage for RC vehicles that use module 0.6 gearing and a screw-fixed motor pinion.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 20T, RC spare part, Module 0.6

€7.29

A compact pinion gear sits at the heart of many RC drivetrains, where tooth count and module determine how power reaches the wheels. This version uses a 20T layout with module 0.6 and a steel build, giving model-building enthusiasts a clearly defined spare part for maintenance, replacement work or gearing changes in compatible setups. The gear is supplied with a separate grub screw that fastens the hub to a shaft through the threaded side hole, a practical detail for secure installation in motor or transmission assemblies. The machined form includes a central bore and side teeth for transmitting rotation between connected drive components. As a models supplies part, it fits naturally into workshop stock for rebuilds, service intervals and targeted drivetrain tuning where the specification must match the existing system exactly. Age marking: 14 Years. On the bench, the 20T steel gear supports careful setup work when a worn or unsuitable pinion needs replacing. In a running model, the correct module and tooth count help maintain the intended gear mesh within a compatible drive assembly, whether the focus is repair, restoration or a fresh mechanical setup.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 21T, RC drivetrain accessory

€7.29

A 21T pinion gear is a small part with a direct effect on how an RC drivetrain comes together. This version uses a module 0.6 tooth profile and steel construction, giving model-building enthusiasts a clearly defined replacement part for compatible drive systems. The gear is designed with a central bore for mounting on a shaft and a side threaded hole for the included grub screw. That fastening method matters in practice, because the screw fixes the gear on the shaft instead of relying on a push fit alone. The evenly cut teeth are made to mesh with a matching module 0.6 gear, which is the key detail when replacing a worn drivetrain part or preparing a fresh setup. In workshop use, the 21T count is also a concrete selection point when an existing transmission calls for the same specification. This accessory fits naturally into repair work, maintenance sessions and parts storage for RC models that use the matching format. On the bench, it supports a clean swap when a drive component needs replacement, and in a tuning collection it serves as a defined steel gear option for compatible assemblies.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 22T, RC spare part, steel module 0.6

€7.79

A 22T pinion gear with module 0.6 brings a defined gearing specification to RC model drivetrain work. The steel construction and machined tooth profile make it a functional choice for maintenance, replacement, or setup changes where this exact gear size is required. The gear is built as a compact drive component with straight teeth around the circumference, a central bore, and a threaded side hole for fastening. A grub screw is included to lock the pinion onto the shaft, so the gear can transmit motor output into the rest of the drivetrain. In workshop use, details such as the 22-tooth count and module 0.6 matter because they determine how the gear meshes with the matching transmission components. The steel finish also suits repeated handling during servicing and rebuilds. This spare part fits naturally into bench sessions focused on repair, upkeep, or gearing adjustments in RC models. Age marking: 14 years. For hobbyists keeping a drivetrain running smoothly, a correctly specified pinion is one of the small parts that makes a setup work as intended.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 23T, RC spare part, steel module 0.6

€7.79

A 23T pinion gear with module 0.6 brings a defined gearing component into RC maintenance and drivetrain setup. The steel construction, central bore and raised hub create a compact part that sits directly in the drive line, while the toothed outer ring engages with the matching gear to pass motor rotation into the transmission. The side threaded hole shows the mounting principle clearly: the included grub screw locks the pinion onto the shaft, keeping the gear positioned where the tooth mesh needs to stay consistent. That makes this part useful for replacing a worn pinion, restoring a damaged drive setup or preparing a model for a gearing change within the same module standard. In workshop use, details such as the 23-tooth count and module 0.6 matter because they define how the gear pairs with the rest of the transmission rather than serving as generic size labels. With its compact format, this gear fits naturally into bench work for RC cars and other model drivetrains that use the same specification. It suits routine servicing, rebuilds after heavy running, or a fresh transmission setup where a steel pinion with grub-screw fixing is required.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear 24T, model accessory, steel

€8.49

A steel pinion gear with module 0.6 and 24 teeth brings a clearly specified drivetrain part into model maintenance and repair work. The machined gear format and central bore are designed for mounting on a shaft, while the raised hub supports the fastening point for the included grub screw. In a drive assembly, the pinion transfers rotational force from the motor shaft into the gear train, making tooth count and module an important match for compatible setups. The 24T layout gives a concrete reference when replacing a worn gear or preparing a drivetrain with the same specification. The separate black fixing screw is included as part of the mounting hardware, so the gear can be locked in place once fitted. The steel construction names the material directly for hobbyists who search by drivetrain component and tooth format rather than by a general spare-part label. This component fits naturally into workshop routines such as servicing a model, replacing a damaged drive part or keeping a matching spare ready in the parts box. The age marking in the data is 14 years and up.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear M0,6 27T, spare part, steel

€9.29

A pinion gear defines how motor power reaches the transmission, and this steel version with M0,6 pitch and 27 teeth is built for that exact drivetrain task in compatible RC models. The compact gear body, central bore and separate grub screw create a straightforward shaft-mounted layout that suits repair benches, replacement work and gearing adjustments. The 27T tooth count sets a specific ratio step, while the M0,6 pitch is the key matching dimension for correct engagement with the corresponding spur gear. Straight teeth run evenly around the outer edge, and the raised hub houses the threaded side fixing point for the grub screw. That fastening method locks the gear onto the motor shaft through the hub rather than relying on a press fit alone. The steel construction adds the material specification many hobbyists look for when selecting drivetrain hardware for regular service work. On the bench, this spare part fits naturally into gearbox maintenance, worn-gear replacement or a planned ratio change on a compatible setup. Age 14 Years. Checking pitch, tooth count and shaft fit before installation keeps the drivetrain matched to the existing transmission components.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear M0,6 29T, RC spare part

€9.29

A pinion gear is one of the small parts that has a direct effect on how an RC drivetrain transfers power, and this Carson Modelsport version is specified as a steel gear with module 0.6 and 29 teeth. The compact format, raised hub and separate grub screw point to a classic motor-shaft mounting setup used in many model drive systems. The 29T tooth count and M0.6 pitch define how the gear meshes with a matching transmission gear, so this spare part is suited to repair work as well as planned gearing changes on compatible models. Steel construction makes it a functional choice for a component that sits at the centre of repeated rotational contact. The centre bore fits onto the shaft, while the grub screw locks the gear in place through the hub. That combination gives hobbyists a concrete replacement part for restoring a worn drive assembly without replacing a larger gearbox section. On the workbench, this kind of component belongs in every well-stocked RC spares box, whether the task is routine maintenance, drivetrain servicing or preparing a compatible model for its next run. Age marking: 14 Years  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear M0.6 28T, RC gear, steel

€9.29

A pinion gear is one of the key tuning points in an RC drivetrain, and this steel version combines module 0.6 with 28 teeth for a clearly defined gearing specification in model workshop setups. The dark metal gear body is paired with a matching set screw, creating a compact drive component that mounts directly to a shaft and takes its place in the transmission layout. The gear features straight teeth, a central bore, and a raised hub with a threaded side hole for fastening. That construction allows the set screw to lock the pinion onto the motor shaft, so rotational force can pass into the gearbox with a firm mechanical connection. As a spare or replacement part, it suits maintenance tasks where worn drivetrain components need to be exchanged with the same tooth count and module. The steel construction adds a precise, technical character that fits hobby-grade RC assemblies. On the workbench, this 28T pinion supports rebuilds, repairs, and gearing changes where the drivetrain specification needs to stay exact. In running models, the gear becomes part of the drive path that links motor output to the rest of the transmission. Age marking: 14 Years.  Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0.6, drivetrain spare part

€8.59

Module 0.6 gearing is a common reference point in RC drivetrain setup, and this pinion gear brings that specification into a compact steel spare part with 25 teeth. The metal gear body, central bore and raised hub form a clear mechanical layout for model maintenance, while the silver finish and straight tooth profile match the functional look of a dedicated transmission component. A threaded side hole in the hub takes the included grub screw, so the gear can be fixed onto a shaft for rotational drive transfer within the drivetrain. That fastening method matters when an existing pinion has worn teeth or needs a like-for-like replacement, because the gear and screw are supplied as the working pair. As a model supplies part, it fits naturally into repair benches, tuning boxes and spare-parts storage for RC vehicle upkeep. The 25T specification gives a defined reference for matching an existing setup rather than guessing at tooth count during service work. In practical use, this component suits rebuilds after drivetrain wear, routine maintenance between running sessions, or a planned gearing change within a compatible module 0.6 system. The compact format also makes it a straightforward spare to keep alongside other transmission parts for workshop use.  Warning! Not suitable for children under 14 years.

Pinions & gears

Steel Pinion Gear 17T, spare part, M0.8

€7.29

A 17T steel pinion gear with M0.8 pitch brings a clearly specified drivetrain component into RC model maintenance and tuning work. The machined gear format and separate set screw create a direct, mechanical connection at the motor shaft, where the teeth mesh with the matching transmission gear to pass power into the drivetrain. The threaded hub allows the set screw to lock the pinion in place on a compatible shaft, which is the key step for controlled power transfer in many model vehicle drive systems. Steel construction makes this part a focused choice for replacing a worn pinion or keeping a matching spare in the workshop. The 17-tooth count and M0.8 module are the decisive fit details for model builders comparing gearing components, because both values need to match the intended drivetrain layout. Age marking: 14 Years. In workshop use, this spare part fits naturally into repair benches, gearbox service and drivetrain refreshes for compatible RC models. It also suits hobby stock for planned gearing changes, where a specific tooth count and module are needed before the next running session.  Warning! Not suitable for children under 14 years.

Pinions & gears

Steel Pinion Gear 19T, spare part, M0.8

€7.59

A 19-tooth pinion gear is a small part with a direct effect on how power reaches the transmission, and this steel version in module M0.8 is built for that exact drivetrain task. The machined gear form, central bore and raised hub create a compact connection point between motor shaft and gear train in compatible RC model setups. The straight-tooth gear profile is designed for meshing with matching transmission components in M0.8 systems, while the separate set screw locks the pinion onto the shaft through the hub. That fastening method supports a defined fit during replacement work and routine drivetrain maintenance. As a spare part, the gear is suited to restoring a worn drive connection or changing the gearing specification on a compatible model. The steel finish and compact dimensions shown by the part itself keep the focus on mechanical function rather than decoration. In workshop use, the pinion can be fitted during a repair, a drivetrain refresh or a gearing adjustment on RC vehicles that use this tooth count and module. Age 14+  Warning! Not suitable for children under 14 years.

Pinions & gears

Virus Rocket 120 middle diff drivetrain part

€53.99

The Virus Rocket 120 middle diff sits at the heart of the drivetrain, linking front and rear drive sections through a compact geared assembly. A large metal spur gear meshes into the transmission system, while the red anodized centre housing contains the differential mechanism and connects to black output shafts on both sides. Visible ball bearings support the rotating shafts and help the assembly run with controlled, even movement inside the drivetrain. The screw-fastened construction gives clear access to the unit for servicing, replacement or rebuild work when a running setup needs fresh transmission parts. The flattened shaft ends are shaped for coupling into the surrounding drive system, so the assembly is ready to slot into the matching vehicle layout. As a model vehicle spare part rather than a complete car, it focuses on one job: distributing rotational force through the centre of the transmission. In workshop use, this component fits naturally into repair benches, rebuild sessions and parts boxes for hobby-grade RC maintenance. It suits enthusiasts keeping a Virus Rocket 120 ready for the next run, whether the goal is restoring drive transfer after wear or replacing a key transmission assembly during a full drivetrain overhaul.

Pinions & gears

Virus-Ex Bevelgear Joint Cup Spare Part

€15.79

The Virus-Ex bevel gear and joint cup are intended as matching spare parts for Virus Extrem models 500409074 and 500409084. The set combines 2 drivetrain components that work in the same mechanical area, making it a focused replacement choice when these exact parts are needed for maintenance. The bevel gear is shown as a metal part with angled teeth and a central opening, a form used where rotational force has to pass through meshing drivetrain elements. Alongside it, the joint cup adds a cylindrical connection piece with an open top, a vertical side slot and a drilled side hole. These concrete shapes matter during repair work because the fit of each part has to match the existing assembly point in the model. As a spare part rather than a general accessory, this set is aimed at keeping the original drivetrain layout consistent with the named Virus Extrem references. In workshop use, the pair suits routine replacement during servicing, rebuilds or wear-related part changes on compatible models. Age marking: 14 Years. Batteries are not included.  Warning! Not suitable for children under 14 years.

Pinions & gears

Virus-Ex Centerdiff Complete, RC drivetrain part

€40.99

The center differential sits at the heart of many RC drivetrains, balancing drive flow between the front and rear ends as the model accelerates, brakes and changes direction. This Virus-Ex Centerdiff. complete brings that core transmission role into one pre-assembled drivetrain component with a large metal spur gear, a red anodized housing, black end caps and black outdrives. The visible gear ring forms the main input point for the drivetrain, while the enclosed differential body manages the transfer of rotational force through the center section. The assembled format keeps the focus on the mechanical unit itself rather than on loose internal parts, which suits maintenance work, replacement jobs and workshop stock for Virus-Ex running gear. A silver collar detail on one side adds another defined interface point within the assembly. The combination of metal gear teeth, anodized housing surfaces and shaped output ends gives the part the technical look expected from performance-focused RC hardware. In a bench setup, the unit fits naturally into drivetrain servicing where a complete center section is needed instead of separate gears and housings. Once installed in a compatible Virus-Ex model, it supports the flow of drive across the chassis through a compact central assembly.  Warning! Not suitable for children under 14 years.

Pinions & gears

Virus-Ex Diff, spare part, complete differential

€40.99

A differential is one of the key working parts in an RC drivetrain, handling the transfer of drive through the axle while the internal gears balance rotational movement between the two sides. This complete Virus-Ex Diff is made as a dedicated spare part for the Virus Extrem and gives model-building enthusiasts a direct replacement for a central mechanical assembly. The unit is supplied as a complete differential rather than as separate loose gears, which keeps repair planning focused on exchanging the full drivetrain component. The assembly shown in the product data includes a geared outer ring, a central housing, end plates and output shafts, forming the core parts needed for this section of the transmission. As a suitable spare part for the Virus Extrem, it is matched to the specified Carson model references 500409074 and 500409084. The mechanical layout suits maintenance work where worn drivetrain parts need to be replaced with the correct fitted assembly. In workshop use, this kind of replacement part supports routine servicing after heavy running sessions, drivetrain wear or a rebuild of the axle drive section. The complete format also suits hobby benches where a damaged differential needs to be swapped without piecing together each internal element individually.  Warning! Not suitable for children under 14 years.

Pinions & gears

Virus/Akuma Bevelgear Joint Cup Spare Part

€15.79

Built for drivetrain maintenance on Carson Modelsport vehicles, this Virus/Akuma Bevelgear Joint Cup set provides the bevel gear and driver used at the differential on the front or rear axle. The pair is intended as a replacement component for supported models where worn internal transmission parts need to be exchanged. Compatibility covers the Virus 4.0, 4.1, 4.2, 4.3 and Race series as well as Akuma variants named in the product data. The two loose metal parts shown are shaped for a direct mechanical role inside the differential assembly, with the bevel gear mounted on a stepped shaft and the joint cup formed as a slotted cylindrical housing with a forked end. This makes the set relevant for repair work that focuses on power transfer between drivetrain components rather than on exterior body parts or electronics. In the workshop, this spare part suits rebuilds, routine servicing and targeted repairs on RC vehicles that need fresh differential hardware after wear or damage. The 14 years+ age marking is stated for the part, and the compact format fits neatly into a parts stock for ongoing maintenance across compatible Virus and Akuma platforms.  Warning! Not suitable for children under 14 years.

Pinions & gears

X 10 ET Rock Warrior, pinion gear, 21T

€6.49

A fresh pinion gear keeps the drivetrain of the X 10 ET Rock Warrior working with the intended 21T specification. As a dedicated replacement part, this gear gives model-building enthusiasts a concrete option for servicing the transmission when the original component shows wear or when the setup calls for the matching tooth count. Within an RC vehicle drivetrain, the pinion gear transfers drive into the transmission through its defined tooth profile, so the exact 21T format matters for fit and gearing. This part is named specifically for the X 10 ET Rock Warrior, which keeps the application clear during maintenance planning. The compact component suits workshop stock for repair work, scheduled parts replacement and mechanical upkeep on an existing model. Because the data identifies it as a pinion gear rather than a general accessory, the role in the drive system is precise and easy to place. On the bench, the gear fits naturally into routine transmission service, whether a worn drive part is being exchanged or a matching spare is being kept ready for the next rebuild. The stated age marking is 14 Years.  Warning! Not suitable for children under 14 years.

Pinions & gears

X-Crawlee Pro Maingear Slipperclutch 1:10

€15.99

Built around the main gear and slipper clutch assembly, this 1:10 replacement set is made for the X-Crawlee Pro drivetrain where controlled friction and spring tension shape how power is passed through the transmission. The set brings together the wear parts and matching hardware needed for a focused clutch rebuild, with assembly stated at 30 minutes. The 10-part layout includes the large toothed main gear, 2 brown friction discs, 2 black pressure-style discs, 2 cup-shaped clutch parts, a washer, a metal bushing and a coil spring. That combination matters because the slipper clutch works through the contact between the friction faces and the spring-loaded stack, rather than through the gear alone. Replacing the full group helps restore the intended fit between the gear, friction elements and tension hardware inside the drive assembly. For workshop use, the clearly separated components also make wear inspection easier before the clutch is reassembled. In a maintenance session, this set suits a drivetrain refresh after extended crawling, repeated low-speed torque loads or visible wear on the clutch faces. The compact parts group also fits neatly into a spares setup for bench repairs, keeping an X-Crawlee Pro ready for the next run once the clutch stack is rebuilt.  Warning! Not suitable for children under 14 years.

Pinions & gears

X10 Main Gear Buggy 80T Spare Gear Wheel

€4.49

The X10 Main Gear Buggy 80T is a dedicated transmission spare part for model-building enthusiasts working on compatible buggy drivetrains. Its 80-tooth layout and central axle hole define its role clearly as a gear wheel intended for replacement, maintenance, or rebuild work where the original transmission component has worn over time. The black moulded gear wheel uses a recessed inner dish shape with fine outer teeth and several reinforced mounting or support points around the centre. These visible construction details help identify the part during workshop sorting and make it easier to match against an existing drivetrain component during service work. As a focused replacement part rather than a general accessory, it suits parts storage for regular buggy upkeep and planned transmission overhauls. The compact single-part format also makes it practical for keeping a correct 80T option on hand for repair benches and hobby stock. In use, this spare gear fits naturally into rebuild sessions, maintenance intervals, and drivetrain repairs on X10 buggy models. Whether replacing a worn original or preparing parts for future service, the clearly defined tooth count and gear form support accurate parts selection for model workshop routines.  Warning! Not suitable for children under 14 years.

Pinions & gears

X10E Desert W.Main Gear Set Drivetrain Spare

€22.99

The X10E Desert W.Main Gear Set brings a key drivetrain assembly back into service with a model-specific spare for the X10E Desert. A large toothed main gear sits around the central housing, while 2 axle outputs extend from each side to link the assembly into the drive system of the vehicle. The black metal unit shows a differential-style construction with a circular casing secured by multiple hex socket screws. This layout supports repair work where a worn transmission section needs a matching replacement rather than a universal part. The visible output ends are shaped for connection within the drivetrain, and the gear ring is built to mesh into the transmission system where controlled power flow matters. As a dedicated models supplies component, it fits naturally into maintenance benches, rebuild sessions and parts stock for RC running gear. In practical use, the set suits restoration of an existing X10E Desert drive assembly after wear in the gear train or housing area. It also works as a workshop spare kept ready for servicing intervals, helping hobbyists return a compatible model to running condition with the correct drivetrain component. Age marking: 14 Years  Warning! Not suitable for children under 14 years.

Pinions & gears

X10EB Differential Complete Front Spare Part

€28.99

The X10EB Differential Complete Front is a dedicated spare part for the front drivetrain of the X10EB. The assembly combines a differential housing with a large ring gear, a matching pinion gear and 2 bearings, creating the central gear set that transfers drive into the front axle area while allowing differential movement between the two output sides. Inside an RC model, this mechanism handles a key task: the pinion drives the ring gear, and the differential balances wheel speed between the left and right side when the vehicle turns. That makes this assembly a practical replacement when worn gears, rough rotation or drivetrain damage affect running performance. The included bearings support the rotating shafts and contribute to controlled, consistent movement within the transmission layout. As a front complete differential for the X10EB, this spare part suits workshop maintenance, repair jobs and planned drivetrain rebuilds. It fits naturally into hobby bench routines where precise replacement parts keep a model ready for the next session on dirt, jumps and technical track sections. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Pinions & gears

X10EB rear differential, RC spare drivetrain

€28.99

The differential is one of the key working parts in an RC drivetrain, managing how drive reaches the axle while allowing the left and right sides to rotate at different speeds. This X10EB rear differential is supplied as a complete rear assembly, giving the drivetrain a dedicated replacement part for repair, servicing or parts refresh work. The assembly shown includes the differential unit with attached gear, outdrives, 2 bearings and a separate bevel gear. That combination supports the mechanical interface between the rear transmission section and the driven axle, with the bearings handling rotational support and the geared parts transmitting power through the rear end. The compact layout and pre-grouped parts make it suitable for replacing a worn or damaged rear differential section without sourcing each matching component separately. As a model spare, it focuses on the running hardware itself rather than cosmetic parts. In workshop use, this kind of drivetrain component matters most when an RC vehicle needs smooth rear power delivery restored after wear or impact. The complete rear format helps keep maintenance focused on the axle section, whether the goal is routine servicing, a rebuild of the transmission area or getting the X10EB back into running condition.  Warning! Not suitable for children under 14 years.

Pinions & gears

XL Adapter for Drive Shaft, model accessory

€17.99

This XL adapter for the drive shaft is a dedicated model accessory for the 1:10 XL chassis, created for the center drivetrain area where the drive pulley and bevel gear are positioned. Its defined role within that layout makes it a targeted replacement part for hobby builds that need the correct connection at the middle of the transmission system. The product data identifies the adapter specifically for drive shaft use and links it to the center section, rather than to a general exterior fitting or body component. That makes it relevant for maintenance work, parts replacement, or a fresh chassis setup where the drivetrain arrangement needs matching hardware. The 1:10 XL chassis reference gives the key compatibility context for selecting the correct part within a model workshop. The 14 Years age marking is stated in the data. In practical use, this kind of adapter belongs in bench-side rebuilds, drivetrain servicing, and chassis-specific spare parts planning. It suits RC model projects where the center transmission area is being restored, refreshed, or assembled with the correct drive line connection in mind.

Pinions & gears

XL Center Differential Main Gear, RC spare part

€19.99

The center differential and main gear sit at the heart of many RC drivetrain layouts, where power transfer and gear engagement define how a chassis runs. This Carson Modelsport spare part names that core component group directly, covering the XL center differential/main gear for the 1:10 XL chassis. The product data identifies this part as a drivetrain replacement for the XL chassis platform rather than as a complete vehicle, so the focus stays on service, repair and continued use of an existing model. In workshop terms, the center differential manages power distribution within the transmission area, while the main gear forms the matching drive interface in that assembly. That makes this part relevant when worn drivetrain hardware needs replacement or when an existing chassis is being rebuilt around the original component layout. The stated age marking is 14 Years. On the bench, this kind of spare part belongs in routine chassis maintenance, parts sorting and rebuild sessions where exact component naming matters. For hobbyists working on a 1:10 XL chassis, the clear designation helps identify the intended drivetrain area before installation and supports a more direct parts search for ongoing model service.

Pinions & gears

XS Differential Front Rear RC Spare Part

€13.49

This complete XS differential is designed as a front or rear replacement unit for the Carson XS-Chassis and brings the drivetrain back to a ready-to-install mechanical core. The assembly combines a black central housing with a large toothed crown gear and slotted output shafts, creating the transfer point that distributes drive through the axle section. As a spare part for 1:10 XS-Chassis vehicles, it matches model numbers 500404252, 500404253, 500404254 and 500404255. The listed range covers Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise and Offroad Fighter Cage red. The product image also shows 2 matching ball bearings alongside the differential assembly, indicating the support components used around the unit. For hobby work on RC drivetrains, this kind of complete assembly helps replace a worn gear unit without piecing together separate internal parts. The differential suits workshop tasks such as drivetrain servicing, repair after heavy off-road use, or preparing an XS-Chassis vehicle for the next running session. It also works as a practical stock spare for model builders who maintain several compatible Carson chassis in the same range.

Pinions & gears

XS Main Gear Set, spare part for 1:10 XS-Chassis

€19.99

The XS Main Gear Set is a drivetrain spare part for 1:10 XS-Chassis models and brings the transmission back to a working mechanical setup with a main gear, a spur gear and 2 bevel gears. Built for hobby-focused RC maintenance, this set fits selected Carson XS-Chassis vehicles where worn or damaged gears need a like-for-like replacement in the drive system. Compatibility in the product data covers the XS-Chassis references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. These correspond to Stadium Fighter blue, Stadium Fighter orange, Offroad Fighter Cage turquoise, Offroad Fighter Cage red, Tekuro grey green, Tekuro grey blue, Ryken blue and Ryken green. In use, the gears sit at the heart of rotational transfer inside the chassis, where meshing teeth pass drive through the transmission stages and support the vehicle's running function. This kind of replacement set suits workshop stock for regular servicing, rebuilds after drivetrain wear, or repairs following heavy off-road use. The compact parts focus on the core mechanical area of the chassis and fit naturally into maintenance routines for RC models that stay active on dirt, gravel and track-style surfaces.

Pinions & gears

XS Spur Gear, RC spare part for 1:10 chassis

€6.89

A spur gear sits at the heart of power transmission in an RC drivetrain, linking motor force to the next stage of rotation with every tooth engagement. This XS Spur gear is specified with M0.5 pitch and 48 teeth, giving model-building enthusiasts a concrete replacement part for maintenance on the 1:10 XS-Chassis platform. The gear wheel is shaped for mechanical fit as well as drive function. Its circular form carries fine outer teeth for gear-driven transfer, while the raised central hub includes a round mounting hole and 2 opposite notches for keyed installation on the intended shaft. That layout supports correct alignment within the transmission and helps keep the drivetrain working as intended after wear or damage to the original part. As a dedicated RC spare part, it suits workshop tasks such as replacing a worn transmission gear during servicing or rebuilding a used chassis. Compatibility is stated for the Carson XS-Chassis models 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The 14 Years age marking is stated in the product data. In a hobby bench setup, this gear belongs where precise fit and correct tooth specification matter more than broad universality, making it a targeted choice for keeping the named chassis range running.

Pinions & gears

Center Differential Mount Set for Virus Akuma

soon available again

The center differential area is a key structural point in many RC drivetrains, and this Center Differential Mount Set is made to restore that section on selected Carson models. The set is described as a Virus/Akuma center differential cover and is intended for the Virus 4.0 6S center differential area, giving model-building enthusiasts a dedicated spare part for repair, maintenance or rebuild work. The set is compatible with Virus 4.0, 4.1, 4.2, 4.3 and Race variants, as well as Akuma models listed under the matching reference numbers in the product data. The image shows 3 black molded components: a rounded cover, a flanged mount with 4 screw holes, and a fork-style bracket with cylindrical ends and a central opening. That combination points to a defined mounting and support function around the center differential assembly rather than a generic hardware replacement. For hobby benches where worn drivetrain parts need a like-for-like fit, that model-specific form matters. With a minimum age marking of 14 Years, the set fits the workshop side of the RC hobby, where upkeep and parts replacement are part of running a model over time. It works well for restoring the original mounting layout during servicing, keeping a Virus or Akuma chassis ready for the next rebuild or return to action.

Pinions & gears

Pinion Gear M0,6 26T, steel drive gear

soon available again

A pinion gear is one of the small parts that keeps a model drivetrain working with accuracy, and this steel version combines module M0,6 with 26 teeth for a defined fit in compatible geared setups. The compact metal form, raised central hub and side fixing point give the part the mechanical layout needed for installation on a shaft in a transmission or motor assembly. The gear body uses straight teeth around the outer edge, a threaded centre bore and a separate grub screw for fastening. That combination supports a firm connection between gear and shaft, so the drive can transmit rotation through the matching gear train. In workshop use, details such as tooth count and module are the key reference points when replacing a worn component or matching parts during a rebuild. The steel construction makes this part a focused choice for model maintenance where the drivetrain specification needs to stay consistent. Whether the task is a repair, a fresh transmission setup or keeping spare parts ready at the bench, this 26T pinion gear fits naturally into the routine of model building and RC servicing. Age 14 Years  Warning! Not suitable for children under 14 years.

Pinions & gears

Virus Rocket 120 Diff, RC spare part, front rear

soon available again

The differential is one of the key working parts in an RC drivetrain, balancing torque between the driven sides while the transmission stays under load. This Virus Rocket 120 front and rear diff is built as a dedicated spare part for the model and brings the drivetrain back to a functional mechanical setup with a compact, preassembled unit. At the centre sits a red anodized housing, flanked by black outdrives and metal shaft interfaces that connect the assembly into the drive system. A large toothed gear on one side feeds power into the differential, while the bearing-supported ends are designed for controlled rotation inside the transmission layout. Visible hex socket screws secure the end plate, and the geared construction gives model-building enthusiasts a concrete replacement part for repair benches, rebuilds and routine drivetrain servicing. The 14 Years age marking is stated in the product data. This spare part suits workshop sessions focused on restoring drive function after wear in the front or rear transmission area. It also fits maintenance builds where a complete differential assembly is needed instead of replacing individual internal parts one by one.

Pinions & gears

1:10 Driving Diff. Gear Set

only available from customer service

Carson 500405776 - 1:10 Driving Diff. Gear Set is an original spare part for model builders who want to repair, optimize or complete their 1:10 driving differential. The set is aimed specifically at enthusiasts who are looking for precisely fitting components from the Carson parts series for maintenance and replacement.

Pinions & gears

1:10 Main Differential

only available from customer service

The Carson 1:10 main differential (500405783) is designated as a component for 1:10 scale vehicles and is aimed at model building enthusiasts. This main differential designates the central differential element in the drive area and is suitable for targeted installation or replacement in 1:10 scale models if the corresponding components are required.

Pinions & gears

1:10 Pinion Gear

only available from customer service

Carson 500405785 1:10 pinion is the compact spare part for 1:10 scale models from Carson and a must-have for demanding model builders. It allows precise replacement to restore the drive function, impresses with its precise dimensions and ensures reliable power transmission and long-lasting usability in 1:10 scale.

Pinions & gears

BAD BUSTER motor pinion 21Z

only available from customer service

Pinions & gears

Differential (1) complete NemeSys

only available from customer service

Differential incl. ball bearing for the NemeSys 500404314

Pinions & gears

DNA Pinion Gear

only available from customer service

The Carson pinion 500405696 DNA Pinion Gear offers model building enthusiasts a precise spare part for the drive. Careful manufacturing ensures reliable power transmission and long-lasting performance when replacing worn components. Ideal for detail-loving hobbyists who value quality.

Pinions & gears

FE-Line motor with pinion

only available from customer service

Electric motor incl. motor pinion

Pinions & gears

FE-Line rear axle/differential complete

only available from customer service

Rear axle incl. differential completely mounted

Pinions & gears

FY10 Central Drive Shaft Main Gear

only available from customer service

500405298 Carson FY10 Central Drive Shaft Main Gear Kit is the replacement kit for the central drive gear of the 1/10th scale DESTROYER and DFFY models. Model building enthusiasts appreciate the kit for the precise repair or maintenance of their vehicles to restore the original drive function.   Warning! Not suitable for children under 14 years.

Pinions & gears

FY10 Differential Unit

only available from customer service

FY10 Differential Unit 500405283 from Carson is a spare part for model builders and is used to replace defective differentials. As a direct replacement for the parts 500405295 and 500405299, it is the right component for repair work and helps model building enthusiasts to repair their vehicles in a targeted manner.   Warning! Not suitable for children under 14 years.

Pinions & gears

FY10 Motor Gear 13T Modul 0,8

only available from customer service

Carson FY10 Motor Gear 13T Module 0.8, item no. 500405300, is the motor gear kit for DESTROYER and DFFY in 1/10 scale. The 13-tooth gear in module 0.8 fits directly into the 1/10 drive group. Model builders and tuning enthusiasts appreciate this targeted spare part solution for restoring or upgrading their vehicles.

Pinions & gears

FY10/8/5 Diff. Outdrive

only available from customer service

The Carson Diff-Outdrive-Kit 500405279 for Destroyer DFFY 1:10 (FY10/8/5) is a complete Diff-Outdrive replacement kit, precisely matched to the 1:10 model. Model building enthusiasts will appreciate this precisely fitting kit, which allows the diff components to be replaced and restores the vehicle's operational readiness.   Warning! Not suitable for children under 14 years.

Pinions & gears

FY8 Motor Gear 15 T Modul 1

only available from customer service

Carson 500405322 - FY8 motor pinion 15 teeth, module 1 is a motor gear kit for the DESTROYER and DFFY 1/8 models. For passionate model builders, this replacement pinion is a perfect solution for repairing the drive, facilitates maintenance and repair on the 1:8 drive and ensures reliable function.   Warning! Not suitable for children under 14 years.

Pinions & gears

FY8 Spur Gear 49 T

only available from customer service

DESTROYER, DFFY 1/8 SPUR GEAR 46 T KIT   Warning! Not suitable for children under 14 years.

Pinions & gears

FY8/5 Center Differential Unit, complete

only available from customer service

500405319 Carson FY8/5 Center Differential Unit complete: This complete center differential kit is specially designed for the DESTROYER DFFY 1/8 and provides all the necessary components for direct use. Model building enthusiasts appreciate the original spare part quality for precise replacement and long-lasting operational readiness.   Warning! Not suitable for children under 14 years.

Pinions & gears

FY8/5 Driving Diff. Gear Set, complete

only available from customer service

Carson FY8/5 Driving Diff. Gear Set complete (500405326) is a complete gear set kit for the DESTROYER DFFY 1/8. Model builders receive a precisely fitting replacement set for repairs or upgrades, which ensures reliable power transmission and constant performance. This allows driving behavior and operational readiness to be restored.   Warning! Not suitable for children under 14 years.

Pinions & gears

KOD BL Piniongear 16T

only available from customer service

Carson KOD BL motor pinion 16Z (500405908) is the 16-tooth motor pinion for KOD BL models. This specific spare part allows the drive gear to be replaced in order to restore the original transmission ratio and function. This provides model building enthusiasts with a clear component for repair, maintenance and fine-tuning.

Pinions & gears

Main gear CV-10B/ T (2)

only available from customer service

500105173 Carson CV-10B/T 46T main gear (2 pieces) is aimed at model building enthusiasts who are looking for an original spare part. The two-piece main gear ensures correct gearing and reliable power transmission in the drive. A precise, accurately fitting component for quick repair or replacement.   Warning! Not suitable for children under 14 years.

Pinions & gears

Skin gear, driver(2) & central shaft NemeSys

only available from customer service

Skin gear, driver (2) for central shaft and central shaft for the NemeSys 500404314

Pinions & gears

V4 Truggy Center Diff Holder

only available from customer service

Pinions & gears

V4 Truggy Centre Differential

only available from customer service

The Carson 500405806 V4 Truggy Center Differential is a central drive component specially designed for V4 Truggy models and is aimed at model building enthusiasts who carry out targeted maintenance, replacement or modifications to remote-controlled ground vehicles. It enables integration into the drivetrain and supports controlled driving behavior during conversions.

Pinions & gears

V4 Truggy Driving Diff. Gear Set

only available from customer service

The Carson V4 Truggy Driving Diff. Gear Set (500405807) is a gear set as a spare part for V4 Truggy models and is aimed at model building enthusiasts who want to replace specific wearing parts or repair their vehicle. The set contains the gears required to rebuild the drive function and simplifies repairs.

Pinions & gears

V4 Truggy Pinion Gear

only available from customer service

Carson V4 Truggy Pinion Gear (item number 500405823) is the precise replacement and upgrade gear for Truggy enthusiasts and hobby racers. As an original Carson component, it ensures smooth power transmission, maintains the performance of your model and facilitates targeted maintenance. A reliable spare part for ambitious model building.

Pinions & gears

Virus 4.0 6S Piniongear

only available from customer service

Carson Virus 4.0 6S Piniongear 14T (500405764) is the pinion gear for the Virus 4.0 6S and is part of Carson's range of model accessories. The 14-tooth Piniongear is suitable as a spare part for repair or tuning and is aimed at model builders who are looking for compatible components for their vehicle.   Warning! Not suitable for children under 14 years.

Pinions & gears

Virus 4.1 Motor pinion 19Z

only available from customer service

Pinions & gears

Virus 4.1 Race motor pinion 18T

only available from customer service

Pinions & gears

Virus 4.2/4.1/4.0 diff. driver (2) center

only available from customer service

Carrier for all Virus center differentials, 2 pieces

Pinions & gears

Virus 4.2/4.1/4.0 diff. driver (2) f/h

only available from customer service

Carrier for all Virus differentials front or rear, 2 pieces

Pinions & gears

Virus Rocket 120 motor piniongear

only available from customer service

500405871 Virus Rocket 120 motor pinion 19T is precisely manufactured with 19 teeth and specially designed for the Virus Rocket 120. Model building enthusiasts appreciate the precisely fitting teeth for constant power transmission and easy replacement. Ideal for repairing or fine-tuning the drivetrain. Suitable for the Virus Rocket 120 from Carson.

Pinions & gears

X-Crawlee pro Bevelgear /Joint

only available from customer service

500405606 Carson X-Crawlee pro bevel gear/joint is the precise replacement part for the X-Crawlee pro and appeals to model building enthusiasts who value accuracy of fit and uncomplicated replacement. Compact in design, this bevel gear/joint facilitates repair and maintenance, fits seamlessly into the concept of the original and maintains functionality.

Pinions & gears

X-Crawlee pro Center Gear complete

only available from customer service

Carson X-Crawlee pro Center Gear complete (500405612) is the original fully assembled center gear for the X-Crawlee pro and is aimed at model builders who want to precisely maintain or repair their vehicle. As a perfectly fitting replacement from Carson, it makes repair work easier and restores functionality.   Warning! Not suitable for children under 14 years.

Pinions & gears

X-Crawlee pro Piniongear

only available from customer service

Carson X-Crawlee pro Piniongear (500405611) is an original spare part for your X-Crawlee pro and appeals to ambitious model builders who value precisely fitting components. This pinion gear ensures reliable compatibility with the X-Crawlee pro and enables uncomplicated replacement to restore vehicle function.   Warning! Not suitable for children under 14 years.

Pinions & gears

X10 Steel Diff Ring Set

only available from customer service

X10 Steel Diff Ring Set (Carson part no. 500405753) is aimed at model builders who are looking for robust, steel differential rings for their X10 system. The precisely manufactured rings increase the service life of the differential, ensure precise gearing and reliable power transmission and are ideal for professional repair and maintenance.

Pinions & gears

X10E Desert W.PinionGear 12Z

only available from customer service

The Carson X10E Desert W. Pinion Gear 500405489 is an original spare part for your X10E Desert W. model and the perfect solution for replacing damaged drive gears. Model builders will find specific, type-compatible replacements that make it easier to rebuild or repair the drivetrain.   Warning! Not suitable for children under 14 years.

Pinions & gears

X10E Main Gear Clutch Set

only available from customer service

500405473 - Carson X10E Main Gear Clutch Set is the original clutch set for the main gear of the X10E. As an original spare part from Carson, it specifically appeals to model building enthusiasts who value compatible components; it is suitable for precise repairs or targeted replacement in the drive area.   Warning! Not suitable for children under 14 years.

Pinions & gears

X10E Pinion Gear 23T

only available from customer service

Pinions & gears

X10EB Center Slipper Clutch Set

only available from customer service

X 10 EB / DIRTWARRIOR CENTER SLIPPER CLUTCH SET   Warning! Not suitable for children under 14 years.

Pinions & gears

X10EB Dirtwarrior Sport Pinion Gear 17T

only available from customer service

Carson X10EB Dirtwarrior Sport Pinion Gear 17T (material number 500405577) is the original 17-tooth pinion gear for X10EB/Dirtwarrior Sport models. Model builders value it as a reliable replacement or targeted upgrade that ensures fit and compatibility and reliably supports the repair and fine-tuning of their models.   Warning! Not suitable for children under 14 years.

Pinions & gears

X10EB DW BL II Main gear cover

only available from customer service

Pinions & gears

X10EB Motorholder Piniongear 13 T.

only available from customer service

Carson X10EB Motorholder Piniongear 13 T. (500405687) is the precise spare part for your Stunt Warrior and combines precise function with long-lasting suitability for everyday use. The 13-tooth pinion gear enables quick, uncomplicated replacement, restores drive precision and gives ambitious model builders reliable performance and control.

Pinions & gears

X10ET-XL Piniongear

only available from customer service

Carson X10ET-XL Piniongear 500405659 for CLIMB WARRIOR is an original spare part for model builders who value series compatibility. The precisely fitting Piniongear replaces lost or worn components and restores correct drive compatibility with the CLIMB WARRIOR. Ideal for maintenance and stocking spare parts.   Warning! Not suitable for children under 14 years.

Pinions & gears

X5 Central driver (2)

only available from customer service

Pinions & gears

X5 Differential driver (2)

only available from customer service

Pinions & gears

X5 Differential gear (2) 11T

only available from customer service

Pinions & gears

X5 motor pinion (2)

only available from customer service

Pinions & gears

X5 Steel toothed wheel 41T

only available from customer service