RC tires & rims

1:10 2WD Wheel Set XL, RC tire set

€37.99

Large-diameter tires can transform the look and running character of a 2WD model, and this 1:10 2WD Wheel Set XL is built exactly for that step. The set combines 4 XL wheels in a black and white finish with front-axle steering levers, creating a coordinated upgrade for buggy and truck chassis that move toward a monster-style setup. The technical layout is split clearly between front and rear fitment. Front rims are prepared for ball bearings, while the rear rims use Tamiya 12 mm hex mounts, matching a common 2WD drivetrain arrangement. Each tire measures 105 mm in diameter and 65 mm in width, dimensions that change both ground presence and the tire footprint on uneven surfaces. The included steering levers are not an afterthought; they are supplied specifically for the front axle because the larger wheel size can alter conventional steering angles. That added hardware keeps the conversion focused on usable steering response rather than appearance alone. On gravel, dirt and rougher off-road sections, the broader tire format gives 1:10 2WD builds a more planted contact area. The set suits rebuilds, visual conversions and chassis updates where standard wheels look undersized against a taller off-road stance. Age 14+

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD

€31.49

Built for 1:10 2WD buggies and trucks, this 4-piece all-terrain wheel set brings a track-ready combination of steering precision and drive traction to mixed surfaces. The black and white wheel design pairs 2 front tyres and 2 rear tyres in different widths, creating a layout that suits the demands of a 2-wheel-drive setup on road, gravel, sand and grass. At the front, the 26 mm tyre width supports a more exact steering response, while the 43 mm rear tyres give the driven axle a broader footprint for stronger acceleration grip on loose ground. Each wheel has a 90 mm diameter, giving the chassis a useful balance of agility and clearance over uneven terrain. Foam inserts inside the tyres help the contact patch stay consistent as the model changes direction or loads up under power. The front rims are designed for ball bearings, and the rear rims use Tamiya hex mounts, matching the different mounting needs across the vehicle. Because the tyres are professionally pre-glued, the set goes straight into the workshop plan without a separate bonding step. That makes it a practical choice for replacing worn running gear, preparing a buggy for mixed-surface driving, or setting up a truck for more dependable traction away from smooth tarmac.

RC tires & rims

1:10 All-Terrain Wheel Set, RC tyres, 2WD/4WD

€31.49

Built for mixed-surface running, this 1:10 all-terrain wheel set combines a 90 mm diameter with a 2WD/4WD layout that suits a wide range of RC setups. The 4-piece configuration uses 2 front tyres and 2 rear tyres, creating a purposeful combination for models that need clear steering response at the front and stronger drive support at the rear when the surface changes from asphalt to loose ground. The front tyres measure 26 mm in width, while the rear tyres measure 43 mm, giving the set a staggered format that supports balanced handling under acceleration. Black and white rims add a clear competition-inspired look, and the tyres are professionally pre-glued to the rims for a clean fit straight from the pack. Integrated foam inserts help the tyres hold their shape during intensive driving manoeuvres, so the tread can work consistently as the model loads up in turns and over uneven sections. The wheel set is designed for 4 x 12 mm Tamiya hex mounts, making it a practical replacement set or a fresh running option for compatible chassis. On road, gravel, sand or grass, the all-round tread is aimed at drivers who switch between surfaces instead of tuning for only one. The set suits routine replacement after wear, but also works as a handling-focused update when a model needs broader traction coverage for everyday RC running.

RC tires & rims

1:10 Wheel Set XL, RC wheels, 4WD 12 mm hex

€34.49

Large-diameter wheels can change both the look and the handling of an RC build, and this 1:10 4WD wheel set XL does exactly that with 4 complete wheels in black and white. The 105 mm diameter and 65 mm width create a noticeably larger footprint that suits rougher ground and gives the chassis a more assertive visual presence. Inside each tyre, foam inserts are matched to the construction so the rubber is supported under load instead of folding over or rolling at speed. That internal support helps the tread stay more stable through acceleration, direction changes and uneven sections, which can make the model feel calmer and more predictable in motion. The set is built around 12 mm hex mounting, a widely used format that allows straightforward installation on matching wheel hubs. Compatibility is stated for Tamiya hex mounts, making the set a practical option for many established 1:10 4WD platforms. On loose surfaces such as sand or grass, the XL dimensions can help the model carry momentum with a broader contact area. On firmer ground, the same wheel size gives the chassis a fuller, more aggressive stance that changes the overall character of the build without altering the core layout.

RC tires & rims

1:10 XS-Line, wheel set, 4 wheels for XS-Chassis

€18.79

Built for 1:10 XS-Chassis vehicles, this XS-Line wheel set brings together 4 mounted wheels in a 115 x 60 mm format with a 12 mm hex hub fitment. The black rims and pronounced off-road tread give compatible RC models a purposeful stance while keeping the setup aligned across all 4 corners. The dimensions suit the Carson XS-Chassis platform named in the data, covering references 500404252, 500404253, 500404254, 500404255, 500404360, 500404361, 500404362 and 500404363. The wide tyre shape and knobby tread pattern are designed for rougher ground where a smoother road tyre would struggle to bite. As a complete 4-wheel set, it supports an even swap across the chassis instead of mixing old and new running gear. The mounted design also keeps the focus on getting a compatible model back into action with matching wheels and rims rather than sourcing separate parts. In running sessions on dirt tracks, gravel paths or compacted outdoor terrain, the tread pattern gives the chassis the mechanical contact needed for acceleration and direction changes. For workshop use, the set also serves as a practical spare for 1:10 XS-Chassis owners who want the correct 115 x 60 mm wheel format and 12 mm hex connection kept on hand.

RC tires & rims

1:8 Climb/Dessert Warrior 3.0, wheel set

€40.99

The 1:8 Climb/Dessert Warrior 3.0 wheel set brings a fresh running setup to off-road RC sessions with 4 mounted wheels that combine black rims and knobby rubber tyres in one ready-to-fit package. The tread pattern is shaped for rough terrain, giving the model a more planted feel on dirt sections, gravel paths and broken ground where clean traction matters. Each wheel uses a black multi-spoke rim with a deep inner dish and reinforcing spoke structure visible from the rear. On the outer face, the beadlock-style look with small moulded bolt details gives the set a purposeful desert and off-road character that suits the Climb/Dessert Warrior 3.0 designation. The central hex-style hub opening supports a direct mechanical connection at the axle, so the wheel set is built around practical replacement use rather than display-only styling. As a 4-piece set, the wheels suit a full vehicle refresh after heavy running or a matched swap before the next session on loose surfaces. The mounted design keeps the focus on getting a 1:8 model back onto the track with a consistent look and tread pattern across all 4 corners.

RC tires & rims

1:8 Virus Extreme, wheel set, 2 mounted wheels

€33.99

The Virus Extreme name points straight to rough-surface running, and this 1:8 wheel set supports that role with 2 mounted wheels built as complete assemblies. The black finish, multi-spoke rim design and pronounced off-road tread give the pair a focused look that suits a hard-driven RC setup on dirt and gravel. Because the rims and tyres are already combined, the set works as a straightforward replacement when existing running gear is worn or damaged. The deep block pattern is shaped for loose terrain, where the tread can key into the surface during acceleration and direction changes. The ready-built format also helps when keeping matching spares in the workshop, since both wheels share the same visual style and tread pattern. As a model supply for the Virus Extreme, the set concentrates on one practical job: restoring a consistent wheel and tyre setup with parts made for this series. On a buggy prepared for outdoor sessions, a fresh pair can be fitted before the next run on compacted earth, gravel paths or rough track sections. The set also suits routine maintenance between driving days, when a matching 2-wheel replacement keeps the model prepared for the next outing.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:8 Wheel-Set KOD, wheel set, 17 mm hex

€40.99

Chunky tread blocks and a 1:8 format give this KOD wheel set a focused off-road setup for compatible RC vehicles. Designed for models with a 17 mm hex wheel hub, the 4-wheel set brings a direct way to refresh the running gear with a tread pattern built for loose and uneven ground. The mounted wheels combine black rims with rubber tyres shaped around an extreme stud profile. That profile gives the contact patch a more aggressive bite on dirt and rough tracks, while the rubber compound is specified for a very long service life. As a replacement set, the 4 matching wheels keep the vehicle on a consistent tread pattern at every corner, which matters when the chassis is working across mixed off-road surfaces. The 1:8 scale fit also makes the set relevant for a broad range of larger RC off-road platforms that use the stated hub format. In use, the wheel set suits track days on dusty ground, rough bashing areas and uneven outdoor terrain where a deeper tread pattern can make a clear difference. For model-building enthusiasts, it is a straightforward upgrade or spare set that keeps a compatible vehicle ready for the next run.

RC tires & rims

Alu Hex Hub 17 mm, RC wheel hub set

€13.49

Small drivetrain parts can make a decisive difference in an RC build, and this Alu Hex Hub set brings a clear mechanical upgrade point with 17 mm wheel mounting hardware. The set includes 2 blue anodized aluminium hub adapters with a hexagonal base and threaded body, giving model builders a defined interface for wheel fitment and axle connection. Each adapter is paired with a matching hex nut, while the included silver pins and black set screws complete the fastening hardware for installation. The hollow cylindrical opening and side hole shown on the hub design indicate a locking layout built around pin retention and screw fixing rather than a simple push fit. That construction supports controlled assembly work when worn parts need replacing or a compatible setup is being refreshed. With 2 hubs in the pack, the set is suited to targeted repair work on one axle position. On the workbench, the compact format keeps the focus on accurate fitting, clean fastening, and dependable mechanical engagement between axle and wheel mount. The 14 years+ age marking places the set in the hobby segment, where tuning, maintenance, and parts changes are part of the hands-on appeal of RC model ownership.

RC tires & rims

Desert W.4x Tyre Wheel Set, RC wheels

€33.99

The Desert W.4x Tyre Wheel Set brings a rugged off-road look to RC vehicle builds with black tyres, black multi-spoke rims and a tread pattern cut for rough terrain. In the workshop or at the track, the set gives scale-focused off-road models a more purposeful wheel setup with a strong visual link to crawler and desert-style machines. The tyre surface shows deep, widely spaced tread blocks that are shaped to work across loose ground, gravel and uneven sections. Beadlock-style rim detailing adds a technical appearance around the outer edge, while the central mounting hole marks the set out as a running component rather than a display part. The sidewall styling visible on the tyres reinforces the off-road character and gives the wheels a more realistic scale presence once fitted. With tyre and rim already combined, the set concentrates on one of the most visible areas of an RC build and changes both stance and terrain focus in a single swap. On shelf-built crawlers, trucks or other off-road RC models, the wheel set suits projects that aim for a tougher terrain profile and a more planted visual finish. It also works well as a replacement set when an existing build needs fresh wheels with a deeper tread layout for rougher running conditions.

RC tires & rims

Drakuro Wheels, RC wheel set, 140 x 75 mm

€37.49

This Drakuro wheel set brings the stated 140 x 75 mm format to the running gear of the 1:8 4WD chassis, with 2 wheels supplied alongside wheel nuts and covers. The 12 mm wheel spindle size gives the key mounting detail up front, so the set can be matched against the required hub specification without guesswork. The dimensions in the data point to a clearly defined replacement part rather than a generic wheel. A 140 mm diameter and 75 mm width establish the wheel size directly, while the included nuts and covers complete the parts named for installation. The set is linked in the data to the 500409096 Drakuro BL 3S anthracite/red and the 500409097 Drakuro BL 3S blue, which gives model builders and RC drivers a concrete reference when selecting spares for maintenance or repair. As a 2-piece wheel set, it suits axle-based replacement where the matching size and spindle format matter. In workshop use, this set supports routine upkeep after wear on the original running gear or damage during driving. It also fits neatly into a spares box for the named Drakuro variants, where the wheel dimensions, 12 mm spindle detail and included mounting hardware can be checked at a glance before the next rebuild or track session.  Warning! Not suitable for children under 14 years.

RC tires & rims

TT02B Alum. Hex Adapter 12x9mm, model spare part

€9.99

The TT02B Alum. Hex Adapter 12x9mm brings a compact aluminium spare part set to model-building work where accurate fit and clean replacement parts matter. With 2 adapter blocks, matching screws and cylindrical pins, the set supports compatible TT02B assemblies with clearly defined hardware for rebuilds, maintenance, or parts changes. The parts are marked 12 mm and 9 mm, making the adapter sizes visible at a glance during workshop use. A clamp-style form with side and top slots allows the screws to tighten the blocks into position, while the metal construction adds a precise, technical feel suited to hobby-grade model work. The set is aimed at 14 Years+ and fits naturally into bench tasks where worn or missing drivetrain or wheel-mount hardware needs a direct replacement. As a model spare part rather than a complete vehicle, the focus stays on exact dimensions, fastening points, and compatibility within the intended setup. On the workbench, the 2 adapters and included hardware support straightforward parts swaps without guesswork over size. They also make a practical addition to spares storage for ongoing TT02B servicing, rebuild sessions, and planned upgrades across compatible model assemblies.

RC tires & rims

Virus Race/Beat Warrior Wheels, model wheels

€36.99

Virus Race/Beat Warrior Wheels brings a focused replacement set to the workshop with 4 matching wheels made for the named Carson models. The set is aimed at model-building enthusiasts who keep running gear in working order and want a direct component match instead of trial-and-error parts selection. Because the product data identifies these wheels specifically for Virus Race and Beat Warrior, the set fits naturally into routine maintenance, repair after wear, or a rebuild that needs the correct wheel group on hand. The 4-piece format covers a full vehicle wheel change in one pack, which keeps the swap straightforward when all corners need the same component. With the age marking of 14 Years, the set sits in the hobby-focused side of the range rather than general toy use. The concise designation also makes this a practical shelf spare for existing compatible models. In a workshop setting, the wheel set supports quick replacement before the next driving session or during a larger overhaul of a used chassis. It also suits parts storage for hobby collections where compatible running components are kept ready for service work.

RC tires & rims

Virus-Ex Alu-hex-hub 17mm spare part

€12.59

The Virus-Ex Alu-hex-hub 17mm is a dedicated spare part for the Virus Extrem platform and is matched to the Carson references 500409074 and 500409084. Its aluminium construction and 17 mm hex design place it in the wheel mounting area, where exact fit and secure mechanical connection matter during maintenance of an RC vehicle. The set shown consists of 2 red aluminium hub parts, 2 matching nuts, 2 metal pins and 2 black set screws. The threaded hub bodies, hex bases and side holes indicate a fastening layout that uses the included hardware to position and secure each part on the intended assembly point. This makes the set suitable as a direct replacement when original hub components are worn, damaged or missing. The red anodised finish also gives the mounted assembly a clear technical appearance that stands out against the surrounding chassis hardware. In workshop use, this spare part suits routine servicing, targeted repairs and the refresh of heavily used running gear on a Virus Extrem model. The 14 years marking is stated in the product data. Batteries are not included.  Warning! Not suitable for children under 14 years.

RC tires & rims

Wheel Nut Set, RC accessory, 4-piece hardware

€13.99

A complete wheel hardware refresh can make a clear difference during RC maintenance, and this Wheel Nut Set brings together 4 matching assemblies for that task. The set is presented as a compact RC accessory for model use, with each assembly combining a blue anodized metal part, a silver flanged lock nut, a black O-ring and a short cylindrical metal pin. That combination points to the wheel mounting area, where small fastening parts need to work together cleanly across all 4 corners. The blue metal components add a distinct machined element to the setup, while the flanged nuts handle the fastening role within each assembly. The included pins serve as locating or drive-related hardware at the axle connection, and the O-rings complete the set with the small retention parts often needed during service work. Instead of replacing one missing piece with a mismatched spare, the 4 coordinated assemblies keep the hardware consistent across the vehicle. On the bench, the set suits routine maintenance, rebuilds and parts replacement on RC models that use this style of wheel hardware. It also fits tuning projects where matching mounting parts across all wheel positions matter for a neat, uniform finish. Age 14 Years  Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 Buggy-Tire/Wheel Set, RC wheels, all terrain

€20.99

A 1:10 buggy gains a clear off-road focus with this Buggy-Tire/Wheel Set in an all-terrain layout, combining black tyres, chrome rims and a 2+2 wheel arrangement for front and rear fitment. The mounted wheel format brings the running gear together in one ready-prepared set and gives hobby benches a quick route to a fresh buggy setup. The tread pattern uses pronounced blocks that suit loose and uneven ground, where a buggy needs defined contact points rather than a smooth on-road surface. The rim design shown in chrome adds a technical contrast against the black tyre finish, giving the vehicle a sharper race-style appearance once fitted. As a wheel and tyre combination rather than separate loose parts, the set also reduces preparation steps when replacing worn running gear or keeping an extra set ready for changing conditions. The 1:10 format makes it a relevant choice for model-building enthusiasts working within that scale class. On gravel tracks, compacted dirt or rough hobby terrain, a fresh wheel set can change how a buggy presents itself and how quickly it is prepared for the next outing. Age 14 Years. This set suits workshop stock, replacement use and visual upgrades for compatible 1:10 buggy builds.

RC tires & rims

1:10 Design 10 wheel set, model wheels, red

€22.99

A 1:10 wheel set can change the whole stance of a model car, and this Design 10 version does it with 4 matching wheels in metallic red. The multi-spoke layout and black tyres create a clear motorsport look that suits track-focused builds, replacement work and visual tuning projects. The set is specified at 26 mm width, giving a concrete reference for model builders matching wheels to an existing chassis or bodyshell. Each wheel follows the same Design 10 spoke pattern, so the finished car keeps a uniform appearance from front axle to rear axle. The red finish adds contrast on darker paint schemes, while the mounted black tyres make the set useful for direct wheel changes instead of sourcing rims and tyres separately. As an accessory in the Models Supplies range, this wheel set fits naturally into workshop stock for rebuilds, refreshes and style updates on 1:10 RC car projects. On a touring car, drift build or display-focused shelf model, the red rims shift the visual balance immediately and give the chassis a sharper custom look. Age 14 Years is stated in the product data, placing this accessory in the hobby segment rather than as a general toy part.

RC tires & rims

1:8 Tire Set Off-Road XL, wheels

€22.99

Loose dirt, gravel and broken ground call for a tread that can dig in, and this 1:8 Tire Set Off-Road XL brings that focus to RC buggy running with 2 complete wheels. Each wheel arrives glued and fitted with a foam insert, combining tyre, insert and rim in one ready-to-mount unit for 1:8 applications. The set is built around an off-road XL tread pattern with pronounced outer blocks and a knobby contact surface shaped for uneven terrain. Inside the tyre, the foam insert supports the carcass under load and helps the wheel keep its form as the buggy accelerates, brakes and changes direction on rough surfaces. The black multi-spoke rims use a 17 mm hex wheel hub standard, giving the set a clear fitment reference instead of a vague universal claim. The data names compatibility with CARSON 1:8 buggies in the Virus XL and Akuma lines. As replacement running gear, these complete wheels suit maintenance after tread wear, damage from hard terrain, or a setup change toward looser ground. Age marking: 14 Years. The pair format keeps front or rear axle changes straightforward when a buggy needs matching wheels for the next dirt session.

RC tires & rims

Buggy Tire/Wheel Set, RC accessory, 1:10

€22.49

A 1:10 buggy gains a clear off-road character with this tyre and wheel set, built around 4 mounted units in a 2+2 layout and finished with chrome-look rims. The combination of black all-terrain tyres and silver 5-spoke styling gives the running gear a purposeful buggy stance while keeping the scale fit aligned with 1:10 models. The tread uses pronounced knobby blocks rather than a smooth road pattern, making this set suited to loose and uneven ground where a buggy needs more mechanical bite. As a wheel and rim replacement set, it covers both practical maintenance and visual refresh work on compatible RC buggy platforms. The mounted format means the tyres and rims already come together as complete running units, so the focus stays on fitting the set to the vehicle. The black tyre finish and bright rim surface create strong contrast, which stands out on off-road bodies and race-inspired builds. In workshop use, the set suits routine wheel changes before dirt-track sessions, gravel running or general terrain driving. It also fits shelf-to-track projects where a buggy needs a fresh wheel setup that matches its off-road role and 1:10 scale proportions.

RC tires & rims

1/10 Super Gripp, wheel set, 4WD RC wheels

€25.79

The 1/10 Super Gripp 4WD wheel set brings a ready-matched running setup to RC off-road models, combining 4 wheels with an assertive square-pin tread pattern and white dish rims. The mounted design gives 1/10 4WD chassis a direct route to fresh rolling gear, with the black tyres and bright rims creating the classic buggy look seen at dirt tracks and loose-surface runs. Across the tread face, the closely packed pin blocks create many contact points that can dig into softer ground and support controlled acceleration and braking on changing terrain. The 4WD layout note makes the set relevant for models that need equal wheel equipment at all 4 corners, rather than a mixed front and rear arrangement. In use, a full 4-piece set also helps keep wear, grip response and visual finish aligned across the chassis. The white dish wheel style adds a familiar competition-inspired appearance while keeping the focus on the tyre profile and contact patch. Whether the task is replacing worn running gear before the next session or keeping a spare set ready in the workshop, this wheel set covers the complete vehicle in one pack. On compacted dirt, loose track sections or general off-road running areas, the tread pattern is built around traction-focused RC driving rather than smooth on-road rolling.

RC tires & rims

1:10 All Terrain Wheel-Set, model wheels

€26.99

A 1:10 wheel set can change both the stance and the running character of a model, and this all terrain 2WD set brings that effect through 4 matching wheels with deep off-road tread and black rims. The combination suits replacement work on used running gear as well as fresh builds that need a complete rolling set in one pack. The tyres show a directional zigzag pattern with a wide profile that gives the contact surface a defined shape on mixed ground. The black rims use a multi-spoke layout with narrow rectangular openings around the outer ring, adding a technical look that fits many RC vehicle styles. A large centre hub opening is built into each wheel for mounting on compatible 2WD models. The set is supplied as 4 coordinated wheel units, which keeps tread pattern and rim style aligned across the chassis instead of mixing different wheel types. On a workshop bench, the set suits routine replacement after heavy running sessions or a visual update during a rebuild. Once mounted, the all terrain layout supports RC driving on loose and uneven surfaces where a more pronounced tread pattern is part of the setup. Age 14+

RC tires & rims

1:10 Off-Road Cross Country, wheel set

€27.99

A fresh wheel and tyre setup can change both the stance and the running character of an RC build, and this 1:10 Off-Road Cross Country wheel set brings that change in a matched 4-piece format. The combination of off-road tyres and chrome-look rims gives 1:10 models a clear cross-country style while keeping the running gear consistent across all 4 corners. The tyre profile uses pronounced tread blocks that suit loose terrain and uneven ground, making the set a practical choice when a road-biased pattern no longer fits the route. The rim design adds circular cutouts and beadlock-style detailing for a more rugged visual finish. As a dedicated wheel set, it also works well for rebuilds, maintenance jobs or planned setup changes between different driving surfaces. The 1:10 scale format keeps the application focused on models in that class, which helps when preparing spare running gear for the workshop. Whether the goal is replacing worn wheels after repeated outdoor runs or preparing a second set for dirt tracks and rougher paths, this 4-wheel package adds a straightforward way to keep a model ready for the next session. Age 14 years+

RC tires & rims

1:10 Y-Design2 Wheel Set, RC wheels, gold chrome

€22.49

A 1:10 on-road chassis gains a sharper road look and a ready-to-run wheel package with the Y-Design2 wheel set in gold and chrome. The set includes 4 fully bonded wheels built for RC vehicles that use a 12 mm standard hex wheel hub, combining straightforward fitment with a striking multi-spoke finish. The tyre construction is tuned for paved running, with foam inserts working behind the road tread to support the casing as the car loads up through acceleration, braking and direction changes. That combination helps the tread hold its shape more consistently on the surface instead of feeling vague when conditions are less than favourable. The partly chrome-plated rim edge adds contrast to the gold centre, while the airy Y-design keeps the wheel face visually open and gives touring, street and drift-style bodies a more technical appearance. Age marking: 14 Years. Mounted on a road car shell, the set shifts the whole visual balance of the chassis, especially on race, tuner and performance-inspired builds. It also suits refresh work on a used runner where worn tyres or dated rims have taken the edge off the car's look and road manners.

RC tires & rims

Beach tyre set CV-10B, wheel set for 1:10 models

€33.99

Loose sand calls for a different contact patch than packed dirt, and this Beach tyre set brings that terrain focus to compatible 1:10 RC vehicles on the CV-10B chassis. The set contains 4 matching wheels with chrome rims and a 90 mm diameter, creating a consistent setup for replacement work or a dedicated sand-running configuration. The tread pattern is shaped for soft ground, where paddle-style lugs can dig in and support drive on surfaces that quickly overwhelm a road-biased tyre. The chrome wheel finish adds a bright visual contrast against the dark rubber and gives the running gear a more customised look. As a complete 4-piece set, the wheels can be fitted across the full vehicle rather than mixed with older tyres of a different wear level. The stated CV-10B fit keeps compatibility clear for builders working around that chassis platform. This wheel set suits maintenance sessions, seasonal terrain changes and fresh project builds that need a sand-ready setup kept separate from everyday running gear. It also works well as a spare set on the shelf, ready for the next outing on loose ground where tread choice matters most.

RC tires & rims

Virus 4.0 6S Wheelset, model accessory

soon available again

Fresh running gear can change how a model looks and feels on the ground, and this 2-piece wheelset is made for the Virus 4.0 6S and Specter 6S. The pair combines black rubber tyres with silver-look rims, giving these Carson Modelsport vehicles a replacement set that matches their off-road character. The tread pattern is cut deep across the tyre surface, which helps the wheels bite into loose terrain instead of relying on a smooth contact patch. Each wheel uses a central hub opening for axle mounting, so the set serves as a practical spare when the original parts are worn, damaged or no longer match the rest of the running gear. The matching rim design keeps both sides visually aligned, which matters on models where wheel appearance is part of the overall build. As a dedicated wheelset rather than a mixed assortment of parts, the pair is straightforward to keep in the workshop as a ready replacement. In use, the set suits routine maintenance after hard bashing sessions, a visual refresh before the next run, or a direct swap when a damaged wheel interrupts driving. For model-building enthusiasts, spare wheels like these are a useful part of keeping a Virus 4.0 6S or Specter 6S prepared for regular off-road action.  Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 All Terrain Wheel-Set, wheels, 4WD

soon available again

A fresh wheel and tyre setup can change how a 1:10 off-road model meets the ground, and this 1:10 All Terrain 4WD Wheel-Set brings that focus to the running gear with 4 matching mounted units. Each wheel combines a black tyre with a white disc rim, creating a clean contrast that stands out on the bench and on the track while keeping the full set visually consistent across the vehicle. The tread uses deep block sections with directional-style grooves, a layout aimed at loose and mixed terrain where the contact patch needs defined edges to work into the surface. Because the tyres are already mounted on the rims, the set suits quick workshop swaps when an existing setup is worn or when a second tread option belongs in the pit box. The 4-piece format covers the full vehicle rather than a partial axle change, which keeps handling balance more even from front to rear. As an accessory in the Models & Accessories range, the set fits naturally into regular maintenance and setup planning for 4WD RC platforms. On gravel paths, packed dirt or changing off-road ground, a dedicated wheel set makes it easier to keep one configuration ready for the next run. The age marking is 14 Years, and the set works well as a practical spare or replacement for hobby sessions centered on tuning, upkeep and outdoor driving.

RC tires & rims

1:10 BigWheel-Set 02, wheel set, on-road

soon available again

The 1:10 BigWheel-Set 02 brings a bold on-road wheel package to RC car builds, combining 10-spoke rims in black and chrome with low-profile tyres for a sharp tuning look. The 4-piece set gives 1:10 models a matched wheel layout that changes the stance and visual character in one swap. Each wheel arrives as a mounted unit, so the set focuses on the finished combination of rim and tyre rather than separate parts. The black centre and chrome outer section create a strong contrast that suits touring-style bodies, street conversions and other road-focused shells. The spoke layout keeps the design clean and technical, while the low tyre sidewall reinforces the custom on-road appearance. Directional groove detailing across the tread adds another layer of visual definition and gives the set a purposeful motorsport style. On display shelves, workshop benches or active RC projects, the wheel set adds a clear styling change without altering the overall 1:10 format. Age marking: 14 years and up.

RC tires & rims

1:8 Tires Set On-Road 4S, wheel set

soon available again

This 1:8 wheel set brings together 2 black on-road tyres and rims in a glued, ready-mounted format for RC model use. With a 100 mm overall diameter, 43 mm width and a 17 mm rim driver, the set gives model-building enthusiasts concrete fit data for matching an existing chassis and hub setup before installation. The on-road tyre type suits paved running surfaces and street-style RC setups where a low-profile road pattern is required. The mounted construction means tyre and rim arrive already paired, avoiding separate gluing work and keeping both wheels consistent in size and type. The black finish and multi-spoke rim look shown by the set support a clean competition-inspired appearance on 1:8 models. Age marking: 14 Years. As a replacement set, the 2-piece format fits routine maintenance, a worn rear or front axle refresh, or a visual update on an RC car already built around 17 mm wheel mounting. The dimensions make it easier to compare existing running gear directly when planning the next track-day or car park session.

RC tires & rims

1:10 Design 6 Spoke Wheel Set, model wheels

available in stores

A 1:10 touring model gains a sharper roadgoing stance with this Design 6 Spoke wheel set in silver. The set contains 4 complete wheel assemblies at 26 mm width, combining rims and tyres in one matching package for a clean, uniform update across the chassis. The silver 6 spoke layout gives each wheel a distinct alloy-style look that suits racing, street and tuned body styles. Because the assemblies are already mounted, the changeover stays focused on fitment and setup rather than matching separate rims and tyres. The 4-piece format supports a full vehicle refresh in one step, whether the goal is replacing used running gear or changing the visual direction of a build. On a 1:10 model, wheel design has a strong effect on the finished stance, and the broad 26 mm format helps fill the arches with a purposeful on-road look. In workshop use, the set suits rebuilds, seasonal refreshes and body changes where a consistent wheel style matters as much as the chassis itself. On the shelf or on the track, the silver finish and spoke pattern give a model car a crisp competition-inspired appearance. Age recommendation: 14 years.

RC tires & rims

1:10 M-Design wheel set, RC wheels, white gold

available in stores

A 1:10 wheel set can change the whole stance of a model, and this M-Design version does it with a sharp white and gold rim layout paired with black low-profile tyres. The 4 matching wheels bring a motorsport-inspired look to touring and drift builds, with the multi-spoke pattern giving the wheel face a clear, technical character. The tyre surface shows a directional tread design with moulded grooves that shape the visual style as much as the running feel. A central hub opening in each rim supports axle mounting on compatible RC vehicles, so the set suits both replacement work and visual updates on an existing chassis. The deep-look rim profile adds extra presence around the wheel arch, while the contrast between the white base and metallic gold spoke inserts gives darker bodyshell colours a stronger outline. The set is supplied as 4 wheels, keeping the appearance consistent across the full vehicle. Mounted on a touring car, drift shell or other 1:10 road-focused model, the wheel design brings out race-inspired body lines and sponsor-style graphics with a more defined finish. For workshop refreshes, rebuilds or custom projects, the M-Design layout adds a distinct tuning accent without altering the core setup of the model.

RC tires & rims

1:10 Rim Hub 12mm

only available from customer service

Carson 1:10 wheel hub 12 mm (500405799) is aimed at model builders and collectors who need specific spare parts for their 1:10 models. The 12 mm specification facilitates the selection of suitable wheel components and makes it possible to assign the hub to a specific wheel mount, thus completing your spare parts collection.

RC tires & rims

1:10 Spike Tyres vo./Fl. Yellow 3-sp.(4)

only available from customer service

Carson 500900074 - 1:10 Tire/Rim Set Buggy neon yellow (4) provides precise off-road traction for demanding model builders. The set contains four spike profiles with a total Ø of 85 mm, 40 mm width and 12 mm rim hub, suitable for all 1:10 models with 12 mm hub; ideal for off-road and soft surfaces.

RC tires & rims

1:10 Wheel Set (2)

only available from customer service

Carson 1:10 Wheel Set (2) - 500405804 offers two 1:10 scale wheels and is specially designed for model builders who want to supplement, replace or individualize their projects. The compact set facilitates the replacement within 1:10 vehicles and supports targeted modifications so that your model fleet remains complete and ready for use, whether in competition or in everyday use.   Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 wheel set Rally Design2 (4) gold

available in stores

The Carson wheel set 500900198 "1:10 Rally Des.2" in gold (4 wheels, 26 mm) enhances the look and driving dynamics of your model vehicle. Specially designed for all 1:10 scale models with 12 mm rim drivers, the special rubber compound combines strong grip with excellent handling, while the striking rim design makes your vehicle an eye-catcher for model building enthusiasts.

RC tires & rims

1:10 Y-Design5 Wheel Set, model accessory

available in stores

A 1:10 wheel set can change the whole character of a model car, and this Y-Design5 set does it with a clean grey and black finish, a 26 mm width and a distinctly road-focused look. The 4 matching wheels create a uniform appearance around the chassis, with the multi-spoke rim pattern giving the running gear a sharper, more technical presence. The low-profile tyre shape and curved tread pattern suit on-road and street-style builds visually, while the pre-mounted wheel format keeps the parts ready for direct fitting within a compatible setup. The dark rim colour works well with race shells, tuner bodies and modern touring car styles without overpowering body graphics or livery details. As a wheel set in the Models Supplies category, it also fits naturally into rebuilds, visual refreshes and spare-parts planning for regularly driven RC cars. The Y-Design5 design adds depth through its spoke cutouts and central mounting area, giving the side view of the model a more finished, competition-inspired look. Whether the goal is replacing worn running gear, refining a body-and-wheel combination or preparing a fresh chassis build, this 4-piece set brings a coordinated wheel solution in one pack. The 1:10 format makes it a practical choice for hobby benches where appearance, fit and a consistent road-car style all matter.

RC tires & rims

1:5 Wheel Set Desert Master XXL

only available from customer service

Carson 1:5 Wheel Set Desert Master XXL (500900100) is a wheel set consisting of two black wheels with M6 mounting for the Desert Master XXL in 1:5 scale. Model builders receive a suitable replacement or exchange option that can be mounted directly and consistently completes the appearance of the vehicle.

RC tires & rims

1:8 Hex Wheel nut (4) M12x1,00 V4/FY

only available from customer service

Carson 500908182 1:8 wheel nuts M12x1.00 (4) made of aluminum, 17 mm wrench size, 6 mm width and ribbed inside for a secure fit on the wheel. The four nuts fit Virus 4.0/4.1/4.2/Race/Truggy Brushless, Virus 4.0 Nitro as well as FY8, FY8 2.0, FY10 and FY10 2.0 and facilitate precise mounting.

RC tires & rims

1:8 Tyre Set Dish black 2pcs

only available from customer service

Carson 500405288 - 1:8 Dish tire/rim set, black: Two-piece wheel set for 1:8 scale models, consisting of two tires with Dish rims. Each wheel has a diameter of 115 mm. Ideal for replacing or customizing the look of your model; scope of delivery: 2 pieces. The set is suitable as a direct replacement for damaged wheels and for the specific visual adaptation of 1:8 models.

RC tires & rims

FE-Line wheels (4) f/h Mega Duster

only available from customer service

Wheels 2x front and 2x rear axle, for Mega Duster

RC tires & rims

FE-Line wheels (4) front & rear

only available from customer service

Wheels 2x front and 2x rear axle

RC tires & rims

FY10 Truggy Rim Hub w/Pin (4 pcs)

only available from customer service

Carson 500405435 FY10 Truggy wheel hub with bolts (4 pieces) is an original spare parts kit for DESTROYER and FY 1/10T models. The set of four contains wheel hubs with locking bolts and completes the wheel system of your truggy. Ideal for model builders who are looking for precisely fitting components for maintenance or repair.

RC tires & rims

FY10 Truggy wheel set (2 pcs)

only available from customer service

The Carson FY10 truggy tire/rim set 500900107 (2 pieces) offers model building enthusiasts targeted off-road performance for use on soft surfaces and off-road. The black set is designed for 1:10 scale models with 12 mm rim drivers and measures 100 mm in diameter with a width of 50 mm, ideal for authentic driving behavior.   Warning! Not suitable for children under 14 years.

RC tires & rims

MB X-Class wheels (2) (MC-10)

only available from customer service

Wheels, 2 pieces, offroad crawler to body Mercedes Benz X-Class diameter 100mm, width 45mm, incl. wheel nut M4  Warning! Not suitable for children under 14 years.

RC tires & rims

Wheels (2) NemeSys

only available from customer service

Wheels (2) diameter 85mm and width 40mm for the NemeSys 500404314

RC tires & rims

X-Crawlee pro Locknut Set

only available from customer service

RC tires & rims

X-Crawlee pro Wheelset (2)

only available from customer service

The 500900126 X-Crawlee pro tire set (2) offers hobby drivers perfect off-road performance: coarse tread and very soft rubber compound ensure outstanding grip. Specially developed for 1:10 Crawlee models with 12 mm rim carrier, Ø 130 mm, width 50 mm, black/blue - robust and easy to fit.

RC tires & rims

X10EB Wheelnut Set (4)

only available from customer service

Carson X10EB Wheelnut Set (2) 500405674 is an original nut set for model wheels, designed as a two-pack and suitable for the Stunt Warrior. Modelers will find this an easy way to restore wheel attachments: precise compatibility with the vehicle ensures fast, accurate repairs.   Warning! Not suitable for children under 14 years.

RC tires & rims

1:10 14 Sp. Design Wheel Set, RC wheels, black

available in stores

A 1:10 wheel set can change both the look and the running character of an RC car in one step, and this 14 Sp. Design version does it with 4 matching black wheels in a 26 mm format. The multi-spoke layout gives touring and street-style builds a clean, motorsport-led finish while keeping the set visually consistent across all 4 corners. Each wheel arrives as a mounted wheel-and-tyre unit, so the set is aimed at straightforward replacement work, freshening a worn setup, or preparing a second configuration for different running sessions. The black rim finish suits a wide range of bodyshell colours and race-inspired liveries without adding visual clutter. The 1:10 size places the set in the core class for many RC on-road models, making it a useful choice for hobby benches that keep spare running gear ready. The 26 mm width matches the proportions commonly used on touring-style chassis and keeps the wheel package focused on road use rather than oversized off-road styling. In use, the set supports quick changes before practice laps, tuning sessions, or a bodyshell refresh where the wheel design needs to match the car's overall theme. It also works well as a replacement set kept in the pit box, ready when an existing wheel package has reached the end of its running life.

RC tires & rims

1:10 14 Spoke Smoke Wheel Set, RC wheels

available in stores

A 1:10 wheel set can change the whole stance of an RC car, and this 4-piece Carson Modelsport set does it with a 14-spoke smoke design and a 26 mm format aimed at model-building enthusiasts. The darker rim finish gives on-road builds a focused motorsport look while keeping all 4 corners visually matched. The set is described as a wheel set rather than a complete running package, making it a practical choice for maintenance, rebuilds and visual updates within a 1:10 model setup. The 14-spoke layout adds a defined pattern around the centre mounting point, which gives the wheel face more structure than a plain disc style. In workshop use, a full 4-wheel pack helps keep replacements consistent instead of mixing different rim styles on the same chassis. The 26 mm width is a concrete reference point for planning fit within a compatible on-road build. On a shelf, the smoke finish suits darker race bodies and modern touring car styling; on a running chassis, the matching set supports a uniform appearance from front axle to rear axle. For hobby benches that keep spare rolling gear ready between rebuild stages, this set adds a clear, model-specific wheel option without drifting into generic hardware.

RC tires & rims

1:10 6S Style Wheel Set, RC wheels, silver

available in stores

Short course racing style comes through clearly in this 1:10 wheel set with 4 matching wheels in Carson's 6S design. The silver rim finish and 26 mm width give model builders a concrete option for replacing worn running gear or changing the look of an existing chassis with a full matching set. The set is described as 1:10 SC wheels, placing it in the short course category rather than a general road or drift format. The 6S style rim design adds a defined multi-spoke appearance that suits competition-inspired bodies and track-focused builds. With 4 wheels in the pack, front and rear can be equipped in one go instead of mixing old and new parts. The visible centre mounting hole supports straightforward installation on compatible hubs, while the matching dimensions across all 4 wheels keep the vehicle's visual balance intact. Mounted on a short course model, the silver wheels stand out against darker body colours and racing liveries. They also suit workshop stock for routine maintenance, rebuild projects or a fresh visual setup when a 1:10 SC chassis needs a complete wheel change.

RC tires & rims

1:10 Classic Design Wheel Set, model wheels

available in stores

Classic mesh rims and low-profile rubber tyres give this 1:10 wheel set a clear road-car character with a tuning-inspired finish. The 4 assembled wheel units combine glossy black centres with a chrome-look outer lip, creating a strong scale effect that suits model vehicles built around street, drift, or racing themes. The multi-spoke rim design adds visual depth around the central mounting hole, while the tyre profile keeps the overall look close to full-size performance wheels. Curved grooves and small cut-out details in the tread pattern shape the on-road style of the set rather than an off-road appearance. Because the tyres are already mounted on the rims, the set is ready for direct use on compatible 1:10 applications without spending time on tyre fitting. The black and chrome-look finish also works well when an existing chassis needs a more defined custom stance. On a touring-style build, the wheel design supports a clean motorsport look; on a drift-focused shell, the mesh pattern and polished lip lean further into classic tuner styling. Age 14 Years. This set suits replacement use, visual upgrades, and fresh project builds where wheel choice plays a major role in the final character of the model.

RC tires & rims

1:10 CV-10B, on-road tyre set, chrome rims

available in stores

Built for the CV-10B platform, this 1:10 on-road tyre set brings together 4 matching wheel units with chrome-look rims and a road-focused tread pattern. The 83 mm tyre diameter and 37 mm width give a clear fit reference for models that use this format, including the Stormracer Extreme named in the product data. The set is aimed at replacing or updating the running gear on compatible chassis without mixing rim styles across the car. Each wheel combines an on-road tyre with a bright multi-spoke rim, creating a cleaner street-style appearance than a plain spare wheel. The directional tread pattern adds the visual character expected from an on-road setup, while the full set of 4 keeps the front and rear matched in size and finish. For hobby benches where fit matters, the stated diameter and width make it easier to compare the set with existing wheels before mounting. Used on a compatible 1:10 chassis, the set suits rebuilds after track use, visual refreshes between running sessions, or keeping spare wheels ready in the workshop. Age marking: 14 years

RC tires & rims

1:10 Design 10Sp., wheel set, silver 26 mm

available in stores

A silver 10-spoke wheel set can change the whole character of a 1:10 model car, giving the chassis a sharper road-going stance and a more defined motorsport finish. This set includes 4 complete wheels in a 26 mm format, pairing silver multi-spoke rims with mounted low-profile tyres for a clean, ready-to-fit upgrade. The spoke pattern creates an alloy-style look that suits touring, street and drift bodies, while the dark tyre profile frames the silver rim face with strong contrast. Because the tyres are already mounted, the set moves straight to axle installation on compatible 1:10 models instead of adding separate tyre fitting to the bench work. The 4 matching wheels keep the appearance consistent across the full chassis, which matters when body lines, ride height and wheel design need to work together. The 26 mm width also fits the visual proportions commonly used on on-road model cars. In workshop use, this set works well as a replacement for worn running gear or as a styling change during a rebuild. On a finished chassis, the silver 10-spoke design gives shells with racing, street or drift styling a more detailed and purposeful finish.

RC tires & rims

1:10 Design 5sp Wheel Set, wheels, black

available in stores

A 1:10 touring or street chassis gains a clear visual change with this Design 5sp wheel set in black. The set includes 4 matching wheels in a 26 mm format, giving RC car builds a cohesive look that suits road-focused shells and low-slung body styles. The 5-spoke layout keeps the face of each rim clean and defined, so brake details, body lines and ride height changes remain easy to read at a glance. The black finish works across many colour schemes, from race-inspired liveries to understated street builds, without pulling attention away from the shell design. As a dedicated wheel set rather than a mixed assortment, all 4 pieces arrive in the same style for a consistent appearance around the full chassis. The 1:10 designation places the set in a familiar hobby scale for tuning, maintenance and visual refresh projects. This format suits rebuilds after wear, planned styling changes, or a fresh rolling setup for a new shell. In workshop use or on a finished display build, the matching 26 mm wheels give the chassis a tidy, unified base that supports a purposeful road-car look.

RC tires & rims

1:10 M-Design Wheel Set, model wheels, white black

available in stores

A 1:10 touring setup changes character quickly when the wheel package matches the body lines, and this M-Design wheel set brings that effect with 4 matching wheels in a white and black finish. The low-profile format and sporty rim pattern give RC cars a focused road-going look that suits on-road builds and display shelves alike. Each wheel arrives as an assembled unit, combining tyre and rim in one fitted part for straightforward installation on a compatible 1:10 model. The M-Design spoke layout creates a crisp contrast against darker bodyshell colours, while the black tyre profile keeps the overall look close to full-scale touring and racing cars. As a replacement set, the 4-wheel format restores a complete running setup in one step instead of mixing old and new wheel styles. The compact profile also suits chassis that rely on a lower, more planted visual stance. In workshop use, the set fits naturally into rebuilds, body refresh projects, or routine parts changes after regular running sessions. On a shelf, the white and black rim design frames the car with a clear motorsport accent; on the track, the matched set keeps the visual package uniform from front axle to rear axle.

RC tires & rims

1:10 M-Design Wheel Set, RC wheels, silver black

available in stores

The 1:10 M-Design wheel set brings a sharp motorsport look to compatible RC cars with 4 matching wheels in a silver and black finish. The 26 mm format gives model-building enthusiasts a concrete reference point for planning a replacement set or a visual refresh around an existing chassis. The multi-spoke rim design creates a defined alloy-style appearance, while the low-profile tyres keep the overall look close to on-road racing setups. A directional groove pattern is moulded into each tyre, adding visible detail across the tread surface instead of leaving the running area plain. The central mounting hole is integrated into each rim for axle fitting on compatible models. Because the set includes 4 matching wheels, front and rear can be equipped in one consistent style rather than mixing different rim designs. This set suits workshop updates, rebuilds and body-matched styling projects where the wheel area shapes the whole impression of the car. Paired with a touring body shell or a race-inspired build, the silver spoke accents and dark tyre profile give the model a clean, track-focused finish.

RC tires & rims

1:10 Rally Design3, wheel set, chrome black

available in stores

A 1:10 wheel set can change the whole character of a model car, and Rally Design3 does it with a black and chrome look that leans into tuned street and rally styling. The set includes 4 matching wheels with mounted rubber tyres, giving a complete visual update in one coordinated format. The rims use a multi-spoke mesh design with glossy black centres and chrome-look outer lips, creating a strong contrast that stands out against plain body colours as well as more detailed paint schemes. The rubber tyres add visible sidewall texture and a defined tread pattern, so the set brings both shape and surface detail to the chassis. Because the tyres are already mounted on the rims, the wheel set suits replacement work, refresh projects, or a styling change on an existing 1:10 vehicle. The 4-piece format also keeps the look consistent across the full model rather than mixing different wheel styles. On a shelf, the black and chrome finish gives a model a sharper, more technical stance. On a running build, the treaded rubber surface and matched rim design carry the same visual theme from front axle to rear axle, whether the goal is a rally-inspired setup or a road-focused custom look.

RC tires & rims

1:10 SC-Wheel Classic Style ch/gold (4)

available in stores

The 500900551: 1:10 SC wheels Classic Style chrome/gold (4) combine authentic design with technical precision for 1:10 scale on-road models. With 12 mm wheel hub, foamed ring insert and V-Groove low-profile tires (Ø62 mm, rimØ52 mm, width 26 mm, tire height 5 mm), they offer excellent grip and easy installation.

RC tires & rims

1:10 wheel set 10 Sp.Design (4) silver

available in stores

Carson 1/10th scale wheel set 500900185 Design 10-spoke in silver (26 mm) provides model building enthusiasts with four (4) perfectly fitting wheels, compatible with all 1/10th scale models with 12 mm wheel hub. The special rubber compound guarantees good grip and excellent handling; the eye-catching rim look gives your vehicle real style - ideal as a replacement or visual upgrade.

RC tires & rims

1:10 wheel set 10 Sp.Design (4) smoke

available in stores

The Carson wheel set 500900172 Design 10Sp.smoke26mm with four wheels enhances your 1:10 scale model both technically and visually. The rims with 12 mm driver fit all suitable models, the special rubber compound ensures strong grip and excellent handling, while the striking rim design makes your vehicle an eye-catcher.

RC tires & rims

1:10 Wheel Set 10-spoke, RC wheels, smoke

available in stores

On-road RC tuning often comes down to the parts that meet the surface, and this 1:10 wheel set brings both function and visual impact to that contact point. Designed for 1:10 on-road RC vehicles, the set uses a 12 mm standard hex wheel hub, so it suits a wide range of street-focused chassis where a clean wheel swap can change both stance and response. The 4 mounted wheels combine a grippy road profile with high-quality foamed ring inserts. That insert supports the tyre from inside, which helps the tread stay more stable when the chassis loads up in braking zones, quick transitions and longer bends. The result is a more controlled feel when the surface is less than ideal, with handling that stays fine and readable instead of becoming vague. The low, sporty look also suits touring cars, drift-inspired builds and other paved-surface RC setups that benefit from a sharper on-road appearance. Visually, the smoke-finished rims bring a strong custom touch through their 10-spoke design and chrome-plated surface. Fitted to a body shell with race styling, dark paintwork or bright graphics, the wheel design adds contrast and depth without overpowering the lines of the car. For hobbyists refining a running chassis or updating the look of a shelf display between sessions, this set adds a focused on-road character in one straightforward change.

RC tires & rims

1:10 wheel set 5 sp.design (4) black/chr

available in stores

Carson 500900190 1:10 wheel set Design 5 (4 pieces) black/chrome combines striking wheel design with targeted performance for model building enthusiasts. The set fits all 1:10 scale models with 12 mm wheel hub. The special rubber compound of the tires ensures good grip and excellent handling, while the rims make the vehicle an eye-catcher.

RC tires & rims

1:10 wheel set 5 sp.design (4) chro./gol

available in stores

Carson 500900189 - 1:10 scale wheel set (4) Design 5 spokes chrome/gold: Four detailed rims with precisely fitting driver for 12 mm, ideal for all 1:10 scale models. The special rubber compound ensures very good grip and excellent handling, while the striking rim design visually enhances your model.

RC tires & rims

1:10 Wheel Set Design 6, model wheels, chrome

available in stores

A 1:10 wheel set can change both the look and the road presence of a model in one step, and this Carson Modelsport set combines chrome 6-spoke styling with mounted black rubber tyres for a clean street and racing-inspired finish. The set contains 4 matching wheel units, giving a full-car solution instead of mixing separate rims and tyres. The 26 mm width provides a concrete reference point for fitting and tuning on compatible 1:10 builds. The mounted construction keeps the focus on the finished running gear, with each wheel combining rim and tyre as one ready assembly. The chrome finish on the rims creates a bright contrast against darker bodyshell colours, while the black rubber tyres add the visual depth and tread texture expected from performance-themed model cars. Small rim detailing around the outer edge strengthens the scale look and gives the set a more technical appearance than a plain wheel design. This set suits refresh work on a used chassis, visual upgrades on a custom build, or a coordinated wheel change during a body conversion. On-road, drift-style and street-focused model projects all benefit from a matching 4-wheel layout that keeps the car visually balanced from front axle to rear axle.

RC tires & rims

1:10 Wheel Set Drift (4) black/red

available in stores

500900157 - 1:10 Drift wheel set (4) black/red combines performance and style for demanding 1:10 scale on-road models. The ready-to-run complete wheels made of hard plastic with 12 mm rim drivers are designed for long drifts on smooth tracks; black Y-rims and red rubber coating add visual accents.

RC tires & rims

1:10 wheel set Rally Design1 (4) white

available in stores

The Carson wheel set 500900197, 1:10 (4 pieces) in rally design, combines style and performance for ambitious model builders: 26 mm wheels with 12 mm rim drivers, suitable for all 1:10 scale models. The special rubber compound offers very good grip and excellent handling, while the striking rim is an eye-catcher.

RC tires & rims

1:10 wheel set Y-Design1 (4) gold/chrome

available in stores

Carson 1:10 wheel set Y-Design1 gold (material number 500900181) offers four stylish rims with a striking Y-design and attracts all eyes to your model. The wheels fit all 1:10 vehicles with a 12 mm rim center; the special rubber compound ensures high grip and excellent handling.

RC tires & rims

1:10 Wheel Set, model accessory, green 10-spoke

available in stores

A 1:10 wheel set can change both the stance and the character of an RC build in one step, and this 4-piece Carson Modelsport set does exactly that with bright green 10-spoke rims, mounted tyres and a 26 mm wheel width. The +3 mm offset adds a concrete fit detail for hobbyists planning a replacement, a rebuild or a more assertive track-style look. The mounted construction keeps the focus on chassis setup and body matching rather than separate wheel and tyre pairing. Each wheel combines a vivid spoke design with a low-profile tyre, creating a clean, performance-led appearance that suits touring, drift or street-style model projects where wheel choice shapes the whole impression. The directional tread pattern adds another visible detail to the set and gives the tyres a purposeful finish when the model is viewed from low angles or in motion. With 4 matching wheels in the pack, front and rear keep the same width, offset and rim style. This set fits naturally into workshop routines such as replacing worn running gear, refining the look of a shell, or preparing a chassis for a new body style. On a display shelf, at the bench or during driving sessions, the green rims stand out clearly against darker bodyshell colours and racing liveries.

RC tires & rims

1:10 Y-Design2 Wheel Set, RC wheels, black

available in stores

A 1:10 RC car gains an immediate visual change with the Y-Design2 wheel set in black, shaped around a clean multi-spoke layout and a 26 mm width that suits on-road model setups. The set includes 4 matching wheels, creating a uniform stance for complete refits rather than a mixed replacement across the chassis. The dark finish works especially well with racing, touring and drift body shells, where the spoke pattern stays visible without overpowering the livery. As a wheel set rather than a single spare, it supports balanced fitment at the front and rear and keeps the overall build visually consistent. The 1:10 format gives model builders a direct scale reference when matching running gear to an existing car. The Y-Design2 designation also helps distinguish this version from simpler rim styles when a more technical, track-focused look is the goal. In the workshop, the set fits naturally into maintenance, tuning and rebuild sessions, whether an older chassis needs fresh rolling hardware or a newer build calls for a darker wheel style. On display shelves, pit-table setups or running sessions, the black finish and spoke geometry give the car a crisp, competition-inspired presence. Age 14 Years

RC tires & rims

1:10 Y-Design3, wheel set, red 4-piece rims

available in stores

A 1:10 wheel set can change the whole character of an RC car, and this Y-Design3 version does it with a strong visual focus on the wheel area. The set includes 4 mounted wheels with glossy red multi-spoke rims and low-profile black tyres, creating a clean on-road look that suits tuning projects, replacement work and fresh body combinations. The 26 mm wheel width and +3 mm offset give this set concrete setup relevance for compatible 1:10 chassis, especially where track width and wheel position shape the final appearance. The central hub opening and surrounding mounting holes match the technical look of performance-style rims, while the directional tyre profile adds a purposeful finish to the tread surface. The metallic red rim colour stands out against darker bodyshell colours and works equally well with race, drift and street-inspired builds. As a 4-piece set, all corners can be matched in one change rather than mixing old and new wheel designs. In workshop sessions, the set suits rebuilds after wear, visual updates between body styles, or a more defined rim colour accent for display and running. On the track or on smooth driving surfaces, the mounted format keeps wheel swaps straightforward and leaves the focus on setup, styling and the overall line of the car.

RC tires & rims

1:10 Y-Design4 wheel set, model wheels, chrome

available in stores

A 1:10 model can change its whole character through the wheels, and this Y-Design4 wheel set brings that effect into a compact tuning upgrade. The set contains 4 matching model wheels with a chrome finish and a 26 mm width, creating a bright, road-focused look that suits on-road builds with a clean, sporty stance. The Y-Design4 rim pattern gives each wheel a defined multi-spoke appearance that reads clearly even when the car is in motion. Mounted low-profile tyres complete each wheel unit, so the set is ready for use as a coordinated replacement or styling change rather than a mix of separate parts. The chrome surface adds contrast against darker bodyshell colours, race liveries and tinted window designs, while the matching 4-piece layout keeps the front and rear axle visually consistent. As a wheel set for the 1:10 class, it fits naturally into hobby work centred on tuning, refreshing worn running gear or changing the visual theme of a chassis. In workshop use, the set suits rebuilds, body swaps and visual updates where the wheel design needs to match the rest of the model. On display shelves or during driving sessions, the chrome rims and low-profile tyre shape give 1:10 on-road cars a sharper, more detailed finish.