Maquette militaires
Maquettes chars
1:35 Attelage de moto Zündapp KS750
510000317€11.99
Article number: 510000317 Product: 1:35 Motorcycle side car Zündapp KS750 Model Dim.: 6,6 cm CONTAINS 3 FIGURES The Treaty of Versailles forbade the reconstruction of the German army. Nevertheless, its commanders evaded the obstacle by introducing vehicles of the civil production, which was not subject to any limitations. Thus they set up entire companies equipped with motorvehicles, developing in this way a "motorized mentality" among the crews. The Zündapp. with a production total of 18.000 units due to its structure which guaranteed easy and economical handling - was considered one of the most modern accomplishments of the age in the field of motorcycle construction. Because of its extraordinary qualities, the Zündapp could follow and escort the tank units of the Wehrmacht and the Waffen-SS to all theatres of operations, especially in Russia, since the side car was even furnished with heating for hands and feet of the man. Zündapps were distributed to all units of the armed forces, Only after 1943, they were replaced by 4-wheel vehicles. Detailed plastic kit of model Motorrad-Gespann Zündapp KS750 in scale 1:35
Maquettes chars
1:35 BMW R 75 avec side-car
510000315€11.99
Article number: 510000315 Product: 1:35 BMW R 75 with Side Car Model Dim.: 6,6 cm Contains 3 figures. Decal for one version. The new German army made use of the experiences collected in World War I to realize their modern reconstruction based on motorization. In spite of the limitations of the Treaty of Versailles able commanders introduced civilian vehicles into the army, thus creating a motorized mentality. In 1940 already, a battalion consisting of 3 to 4 companies each equipped with 52 motorcycles with sidecars and 4 motorcy-cles (single), was integrated into the motorized infantry and the armored divisions. Moreover, motorcycles were present in nearly all other Wehrmacht units, especially with the reconaissance units and the command, as well as the pioneer and the supply units. Produced in 16.500 units, the BMW R 75 together with the Zijndapp KS 750 formed the nucleus of the motorized units on all theatres of operations, especially in Africa and in Russia. The motorcycle was armored with an MG 34 mounted on the sidecar. On the road, it reached a maximum speed of 92 Km/h.
Maquettes chars
1:35 Camion allemand 3to. Type S
510000216€26.99
Article number: 510000216 Product: 1/35 German Truck 3to. TYPE S Model Dim.: 17,1 cm Registered by the Wehrmacht under the designation LKW 3,6-36 S 3t Blitz, this truck was the typical example of that practice of unification adopted in 1938 for the construction of civil transport means convertible into military vehicles. Actually, this truck - OPEL without BLITZ - was manufactured for commercial use featuring more or less the same characteristics.
Maquettes chars
1:35 Ger. Sd.Kfz.167 Sturmgeschütz IV
510000223€30.99
Référence article: 510000223 Produit: 1:35 GER. Sd.Kfz.167 Sturmgeschütz IV Le Sturmgeschütz IV a été construit sur le châssis du char moyen Panzer IV pour fournir, dans les phases avancées de la Seconde Guerre mondiale, à l'armée allemande un canon d'assaut capable d'être efficace également en tant que chasseur de chars. Le Stug IV était armé d'un canon Stuk40 de 75 mm L/48 à haute vélocité initiale installé dans une casemate, protégé par un mantelet blindé, capable de perforer les blindages des principaux véhicules blindés ennemis. Distribué aux unités dans les premiers mois de 1944, il a complété et souvent remplacé le canon d'assaut Stug III qui avait subi en 1943 une baisse soudaine de la production en raison des raids de bombardiers alliés de plus en plus fréquents sur les zones industrielles allemandes. Largement déployé sur le front de l'Est, le Stug IV a également été utilisé par les unités blindées et les détachements antichars de la Wehrmacht en Normandie, où, grâce à son faible profil, il s'est avéré particulièrement difficile à identifier dans les haies de la campagne française. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Kfz. 69 Schwimmwagen
510000313€12.99
Article number: 510000313 Product: 1/35 Kfz. 69 Schwimmwagen Model Dim.: 10,9 cm including 3 figures Decals for one version As the Volkswagen 82 (Kubelwagen) proved very successful during the campaign in Poland, it was necessary to produce everincreasing numbers of this vehicle. Later, Ferdinand Porsche developed an amphibian version of this car, called the Schwimmwagen. The light weight of this vehicle (about 1/2 ton) permitted crossing of muddy areas, since only two men were sufficient to keep this vehicle moving. For reconnaissance and liaison missions, water had to be crossed frequently, which was impossible with other vehicles.
Maquettes chars
1:35 M-113 APC
510006753€29.49
L'M113 peut être considéré comme l'un des APC (Armoured Personnel Carrier) les plus célèbres de l'histoire. Il a été développé à la fin des années 1950 et au début des années 1960 dans le but précis de transporter une escouade d'infanterie entièrement armée et équipée avec un bon niveau de protection aussi près que possible de la zone d'opérations. En plus du transport tactique de l'escouade d'infanterie, l'M113 pouvait offrir un soutien rapproché aux troupes grâce aux armes embarquées, qui, dans les premières versions, se limitaient à une mitrailleuse Browning M2 de 12,7 mm. Utilisé pour la première fois au Vietnam, il est devenu l'un des véhicules blindés les plus répandus dans le monde, avec plus de 80 000 exemplaires produits. Fiable et robuste, avec de bonnes performances sur tous types de terrains, il a été utilisé, dans ses différentes variantes, par de nombreuses forces armées. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd. Remorque 51
510006450€12.49
Article number: 510006450 Product: 1:35 Sd. Anhänger 51 Model Dim.: 7,6 cm CONTAINS 2 MODELS The Sd Anhänger 51 trailer could easily be used by a large number of Wehrmacht vehicles. The trailers have been developed to be used as ammo carriers and they were typically associated to anti-aircraft half-tracks armed with 20 mm Flak guns. During the Military campaigns the trailers were often fully loaded with any kind of materials. The lower "U" frame was extremely robust and suitable to be used on road and off road. Detailed Plastic Kit of model Sd. Anhänger 51 in scale 1:35
Maquettes avions militaires
1:48 FIAT CR.42 Falco Assa./Nig. Fighter
510002842€30.99
En partant du grand succès du biplan C.R. 32 « Freccia », qui fit preuve de fiabilité et d’efficacité opérationnelle pendant la Guerre civile espagnole, Fiat développa, à la fin des années 1930, le nouveau C.R. 42 « Falco ». Ce nouveau chasseur monoplace biplan conservait, comme son prédécesseur, un train d’atterrissage fixe et un cockpit ouvert, mais il intégrait certaines innovations, telles qu’une structure entièrement en aluminium et en acier recouverte de métal et de toile. Son moteur radial Fiat A.74 refroidi par air permettait au C.R. 42 d’atteindre une vitesse de 400 km/h. Il se distinguait par une manœuvrabilité exceptionnelle, très appréciée des pilotes, mais souffrait des limitations inhérentes à la configuration « biplan », qui affectaient ses performances opérationnelles par rapport aux chasseurs monoplans plus modernes et puissants. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1/35 Sd.Kfz.251/1 Ausf.D w/Vision de nuit
540006984€85.05
Article number: 540006984 Product: 1:35 Sd.Kfz.251/1 Ausf.D w/Night Vision The Sd.Kfz.251 Ausf.D with Night Vision Falke was a special variant which was equipped with specialized night vision equipment, the vehicle was designed for reconnaissance and other missions at night and in low-light conditions. The key feature of it was its night vision equipment, which included a range of infrared and ultraviolet lights, as well as a specialized periscope that allowed the crew to see in the dark. Despite its advanced technology, this special variant was produced in limited numbers due to the high cost of the specialized equipment and the difficult production conditions in Germany during the war. The kit includes Magic tracks and a set of early version tracks. Additionally, a figure set of four Nachtjager soldiers is offered for free. Valuable metal width indicators and an array of photo-etched parts are also available to enhance the level of detail in the model. Detailed Plastic Kit
Maquettes chars
1/72e Ensemble de maquettes M-1 Abrams
510072004€30.99
Le char d’assaut de troisième génération M1 Abrams constitue l'épine dorsale des divisions blindées de l'armée Américaine et du Corps des Marines. L'Abrams se caractérise par son blindage lourd (il compte parmi les véhicules de combat les plus lourds au monde) et l'adoption du puissant moteur à turbine multi-carburant. Une grande attention a été portée à la protection de l'équipage grâce au dépôt de munitions séparé et fortement protégé. Le M1 Abrams, qui est entré en service opérationnel au début des années 80 pour remplacer les anciens M-60, offre un système sophistiqué de conduite de tir et un blindage moderne. D'abord armé d'un canon de 105 mm, il a ensuite été équipé du canon de 120 mm le plus moderne et le plus puissant avec un tube lisse capable d'utiliser une variété différente de projectiles. L'Abrams a été largement utilisé, avec une efficacité létale, sur tous les grands théâtres opérationnels, du Moyen-Orient à l'Afghanistan, s'avérant être supérieur à tout autre char adverse.
Maquettes chars
1:24 Jeep Willys MB 80th Anniversary
510003635€37.99
Article number: 510003635 Product: 1:24 Willys Jeep MB "80th Anniversary" In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multipurpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II. Even after 80 years, the "Willys" is still considered today, to be the four-wheeled vehicle which is most symbolic of the American army during the Second World War, and thanks to its enthusiasts and collectors, there are many examples of the jeep, still in perfect working order. Detailed plastic kit
Maquettes avions militaires
1:32 Lockheed F-35A Lighting II
510002506€109.99
Article number: 510002506 Product: 1:32 Lockheed F-35A Lighting II Model Dim.: 49,0 cm 100% NEW MOULD - SUPER DECALS SHEET FOR 6 VERSIONS - PHOTO ETCHED PARTS - COLOURED INSTRUCTION SHEET AND NEW STICKERS MASKS SHEET The JSF Joint Strike Fighter program was set up to develop a new fifth-generation all-weather multirole combat aircraft a ble to replace the existing United States and NATO strike-fighters. The aerospace industry team led by Lockheed Martin generated the single-seat, single-engine, F-35 Lightning II. It adopts stealth technology and it is characterized by the trapezoidal wings and by the use of the most advanced hi-tech materials and avionic systems. Developed to perform air superiority, close air support and ground attack missions, it has been design in different configurations. The F-35A is the conventional takeoff and landing variant, the F-35B is the short takeoff and vertical landing variant and the F-35C, with foldable-wings, has been developed to be used from conventional deck carriers. Thanks to its operational flexibility, the advanced on-board technology and the impressive project innovation, the F-35 lightning II will be a reference aircraft in the twenty-first century military aviation. Deatailed plastic kit of model Lockheed F-35A Lighting II in scale 1:32
Maquettes avions militaires
1:32 Macchi MC. 202
510002518€104.99
Référence article: 510002518 Produit: 1:32 Macchi MC. 202 Le Macchi MC 202 Folgore a constitué une nette innovation pour les détachements des avions de chasse de la Régie Aéronautique. Extraordinairement beau d'un point de vue aérodynamique, il était équipé des puissants moteurs en ligne allemands DB 601, produits sur licence par l'industrie aéronautique italienne. Les nouvelles motorisations et la solidité du projet aéronautique ont équipé la Régie Aéronautique d’avions de chasse en mesure de combattre « à égal » avec ceux des alliées. Les performances de vol, comparées aux avions de chasse de la génération précédente équipés de moteurs radiaux tels que le Fiat G-50 et le Macchi Mc-200, étaient en effet bien meilleures. Manœuvrable et rapide (il pouvait atteindre 600 km/h), il était armé dans les premières versions de deux mitrailleuses Breda-SAFAT calibre 12,7 mm installées sur le nez. Ce n'est que dans les versions ultérieures que l'armement a été renforcé pour le rendre plus apte au combat aérien contre les avions de chasse Américains et Britanniques.
Maquettes avions militaires
1:32 Macchi MC.205 Veltro
510002519€104.99
Le Macchi M.C. 205 Veltro est considéré par beaucoup comme le meilleur chasseur italien de la Seconde Guerre mondiale. L'évolution du "Folgore" a conservé le design aéronautique excellent de son prédécesseur et a été équipée, comme les autres chasseurs de la "série 5", du moteur allemand Daimler-Benz DB605. Le puissant moteur à 12 cylindres en V, également produit sous licence par Fiat, permettait au Veltro d'atteindre une vitesse maximale de 640 km/h. Rapide, maniable et bien armé, avec l'adoption de 2 mitrailleuses de 12,7 mm dans le nez et de 2 canons de 20 mm dans les ailes, il était capable de combattre à égalité avec les meilleurs chasseurs alliés de l'époque comme le P-51 Mustang américain. Il entra en service dans les premiers mois de 1943 avec la Regia Aeronautica. Après l'armistice du 8 septembre, il fut utilisé, jusqu'à la fin du conflit, à la fois par les unités de vol de la République Sociale Italienne et par celles de l'Aeronautica Cobelligerante. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes avions militaires
1:32 Tornado GR.4
510002513€144.99
Article number: 510002513 Product: 1:32 Tornado GR.4 Model Dim.: 52,1 cm 100% New Moulds PE Sheet – Rubber tyres & fuselage covers Super Decals Sheet Size of the model 52,1 cm The "Tornado" arose from a collaborative project between Italy, Germany, and the United Kingdom to produce a multi-role high-performance combat aircraft. The primary requirement however was to develop a ‘state of the art’ modern aircraft able to perform low-altitude penetrating strike missions. This need was met by the development of a twin-engine combat aircraft with a variable-sweep wing. The Tornado GR.1 (Ground Attack/Reconnaissance) was the initial version adopted by Royal Air Force in early ‘80s. In 1996 the Tornado was upgraded to the Gr.4 standard which was characterized by improved operational capabilities, new avionics systems for navigation and the adoption of new ‘on-board’ technologies. These systems enabled the effective identification and tracking of targets and the weapons management of the newer generation of weapons such as Paveway IV bombs and Storm Shadow cruise missiles. Detailed plastic kit in scale 1:32
Maquettes chars
1:35 Sd.Kfz.251/21 Ausf.D Drilling
540006862€88.99
Article number: 540006862 Product: 1:35 Sd.Kfz.251/21 Ausf.D Drilling The SdKfz 251/21, also known as the Mittlerer Schutzenpanzerwagen – Drilling MG 151, was a very effective production anti-aircraft version of the SdKfz 251 halftrack. Mounted with three excellent 15mm MG 151/15 or 20mm MG 151/20 machine guns on a compact pedestal behind a small armored shield, having a rate of 700 rounds per minute per gun, these modified SdKfz251 halftracks could provide very effective defensive fire against the Allied aircraft. Special Features: - Conical pedestal mount w/accurate detail - MG151 with detailed cradle - "ez-Track" specially for Sd.Kfz.251 - Early type individual track link included - Metal width indicator poles - Bonus aluminum barrel heads - Bonus crew uniform and boots - Various decal markings provided Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 1/4 Ton 4x4 Ambulance Jeep
510000326€11.99
Article number: 510000326 Product: 1:35 1/4 Ton 4x4 US Ambulance Vehicle Model Dim.: 11,8 cm Decals for 2 versions The ubiquitous jeep is perhaps the most all-round vehicle ever constructed. Because it xas ruggedly built and thus able to traverse most types of terrain without suffering structural damage, one of the task assigned to the jeep was that of ambulance service.
Maquettes chars
1:35 3.7cm FlaK 43 Flakpanzer IV Ostwind
540006550€88.99
Article number: 540006550 Product: 1:35 3.7cm FlaK 43 Flakpanzer IV Ostwind The long-awaited 1/35 Ostwind, one of Dragon's classic AFVs, is receiving a facelift with the new premium edition. When Dragon's 1/35 Ostwind first debuted a decade ago, it garnered significant attention. The new 2024 premium edition takes it a step further, sparing no expense. In addition to the familiar Magic Tracks, the road wheels showcase the latest design. Furthermore, numerous 3D printed parts have been incorporated, including the meticulously reproduced muzzle brake of the 3.7cm Flak gun and the inclusion of spent bullet casings (x 15). With the addition of an aluminum gun barrel, this 2024 premium version is a must-have collectible for all 1/35 AFV modelers. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 7.5cm Leichtgeschuetz 40 w/Crew
540006147€31.99
Article number: 540006147 Product: 1:35 7.5cm Leichtgeschütz 40 w/Crew Operation Marita. This is the name Germany gave its plan to invade Greece in April 1941. In fact, Germany stepped in after Italy’s failed invasion kicked off the preceding October. Greece had repelled that initial invasion and had even counterattacked by March 1941. Consequently, on 6 April, 680,000 German troops with 1,200 tanks and 700 aircraft launched their invasion of Greece from Bulgarian territory, bypassing the bulk of Greek troops near the Albanian border. The Metaxas defensive line was overrun, and small numbers of Australian, British and New Zealand troops could not stem the flow. By the end of the month, the Greek mainland was in German hands, and then German troops also landed on and captured Crete in May 1941. Of interest, next year will mark the 80th anniversary of Operation Marita, so Dragon has brought together a number of 1/35 scale figure sets that feature participants in that decisive campaign. This Dragon assortment features no fewer than six 1/35 scale figure sets depicting the Greek invasion, a campaign that has not received the publicity or attention that it perhaps deserves. All the figure sets represent German troops, including paratroopers, mountain troops, combat engineers and elite infantrymen. These realistic-looking figure sets depict different units, various uniforms and a range of weapons, giving lots of flexibility for model-makers to create a diorama. Few eyewitnesses of that military campaign in Greece remain alive, but modelers can recreate it through this prized figure collection. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 7.5cm RSO with PAK40
510000355€33.49
Pour mieux répondre aux exigences logistiques et de transport dans les conditions environnementales difficiles du front de l'Est, des tracteurs chenillés furent développés pour la Wehrmacht. Ces véhicules étaient capables de remorquer plusieurs types de véhicules et de transporter divers chargements, notamment des munitions et des vivres. La désignation officielle de cette série de véhicules, extrêmement polyvalents dans leur utilisation opérationnelle, était "Raupenschlepper-Ost" (tracteur à chenilles de l'Est). L'RSO fut principalement fabriqué par l'entreprise autrichienne Steyr, qui développa également une version antichar, simple et économique à produire, armée du redoutable et fiable canon PaK40 de 75 mm. Le véhicule conservait essentiellement la même structure technique que le tracteur, mais était doté d'une protection avant renforcée, compte tenu de son utilisation opérationnelle en contact avec l'ennemi. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 8.8 cm Panzerschreck Infanterkarren
540006104€35.99
Article number: 540006104 Product: 1:35 8.8 cm Panzerschreck Infanterkarren We have carefully chosen a few items for production that share a common theme. With just these kits, modelers can create vignettes that vividly depict various scenarios on the battlefield: a marching grenadier team accompanied by a Jutland horse and Panzerschreck carts, a gun crew taking a break and enjoying a meal, a busy frontline communication center, and a Kettenkrad with a PaK 36/37 struggling forward with assistance from the crew. With this selection of carefully chosen items, modelers have the opportunity to bring the battlefield to life through intricate vignettes. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 Allied Force Eto 1944
540006653€16.79
Article number: 540006653 Product: 1:35 Allied Force Eto 1944 After the successful Allied invasion of Normandy in June 1944, the Allied forces moved to liberate the rest of occupied Western Europe. Over the following months, they fought a series of bloody battles to push the Germans back. The Allies faced fierce German resistance and got some setbacks before crossing the Rhine and advancing into Germany. To represent the soldiers involved in these battles, we have selected the following symbolic figure sets for a reproduction. Don’t miss out! Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes bateaux militaires
1:35 Bateau rapide S-26 / S-38
510005625€189.99
Référence article: 510005625 Produit: 1:35 Speedboat S-26 / S-38 Entre les deux guerres, de nombreuses marines réalisèrent des programmes visant à développer des flottilles de torpilleurs capables d'effectuer des missions de patrouille et d'attaque. Le nouvelles technologies des moteurs assuraient, par rapport à la Première Guerre Mondiale, de meilleures performances et une plus grande efficacité opérationnelle. Au cours des années 1930, la Kriegsmarine allemande développa les célèbres vedettes lance-torpilles de la classe S. Entre 1939 et 1940, la série S-26 fut construite, reconnaissable à son gaillard d’avant intégré avec deux tubes lance-torpilles de 533 mm. La solution esthétique de l'arc sera également maintenue et améliorée pour les versions ultérieures. Parmi les Schnellboote les plus célèbres, on trouve ceux qui appartiennent à la version S-38. Près de 100 unités produites, elles mesuraient 35 mètres de long et elles déplaçaient plus de 100 tonnes à pleine charge. Les moteurs Daimler Benz à 12 cylindres permettaient d’attendre une vitesse maximale de 39,5 nœuds.
Maquettes chars
1:35 Bedford QL Truck
510000241€36.99
Référence article: 510000241 Produit: 1:35 Bedford QL Truck La gamme de camions militaires Bedford QL a été créée à la fin des années 1930, à la demande de l'armée britannique, afin de disposer d'un véhicule de transport plus moderne et plus flexible. Les tests ont été achevés en 1940 et c’est au début de l’année 1941 que les Bedford QL ont été distribués aux services opérationnels. Pendant toute la durée de la guerre, il fut utilisé sur les différents fronts et s'avéra être un support valable pour satisfaire les besoins de logistique et de transport grâce à ses quatre roues motrices et son poids relativement faible qui augmentait sa capacité de charge. En raison de sa flexibilité et de sa robustesse, il a également été utilisé pour remorquer et transporter des pièces d'artillerie telles que le canon antichar 6 Pdr ou le canon antiaérien Bofors de 40 mm. Équipé d'un moteur à essence 6 cylindres de 72 chevaux, il se caractérise également par sa facilité d'entretien et de réparation, un élément important sur les champs de bataille.
Figurines militaires et accessoires
1:35 Borgward IV Ausf.A Heavy Demolition
540006101€35.99
Article number: 540006101 Product: 1:35 Borgward IV Ausf.A Heavy Demolition Here comes a reproduction of three small German transports for specific purpose during the WWII. First, we have the horse drawn Infanteriekarren, a compact cart capable of carrying infantry equipment, weapons, and munitions, while the Borgward IV Ausf.A is a specialized demolition charger vehicle. The last one Kettenkrad mounted with cable reels is a unique vehicle ensuring communication lines. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Brit. Crusader Mk.III avec. Équipage
510006592€36.99
Article number: 510006592 Product: 1:35 Brit. Crusader Mk.III m. Besatzung Designed at the beginning of the Second World War, the Crusader was one of the most important British "Cruiser" tanks reaching a production of over 5,000 units. Equipped with Christie suspension with large diameter rolling wheels, the Crusader possessed remarkable driving skills on rough terrain. The first versions of Mk. I and Mk. II were armed with a 2 pdr cannon. later replaced by the more powerful 6 pdr cannon. in the Mk.III version. Lacking adequate armor against enemy fire, it was also very vulnerable to enemy mines and anti-tank guns, and its armament was often inadequate in front of similar German vehicles. However, when used in a coordinated way, they managed to achieve good results. Detailed plastic kit
Figurines militaires et accessoires
1:35 British SBS w/Kayak
540003023€14.29
Article number: 540003023 Product: 1:35 British SBS w/Kayak We've chosen a number of items from our 1/35 World's Elite Forces series to produce. These kits showcase well-known elite forces from the USA, Britain, France, and Germany, and are designed to fit into conflicts that have occurred around the world. The poses are realistic and highly suited to the battlefield, and these unique subjects cannot be found anywhere else on the market. Detailed Plastic Kit
Maquettes chars
1:35 Camion GMC 2 1/2 tons "D-Day 80th Ann.
510006271€25.99
Référence article: 510006271 Produit: 1:35 GMC 2 1/2Ton.Truck"D-Day 80th Ann." Le camion GMC de 2 ½ tonnes a été construit en très grand nombre et peut être considéré comme l'épine dorsale de la logistique de l'armée américaine pendant la Seconde Guerre mondiale. Caractérisé par une structure très robuste et fiable, dont la force réside dans ses bonnes performances « tout-terrain » grâce à ses six roues motrices et au design efficace des suspensions, il a été produit dans de nombreuses variantes. Outre les versions « cargo » les plus courantes, avec cabine ouverte ou fermée, à « pas long » et à « pas court », des configurations ont également été développées, dont certaines fabriquées directement « sur le terrain », pour des utilisations plus spécifiques et ponctuelles. Son rôle a été crucial pour répondre aux besoins logistiques exigeants qui ont suivi les premières étapes du débarquement en Normandie, avec le transport et la manutention de quantités impressionnantes de troupes et de matériaux. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Chasseur de chars. VI Tiger I version E production tardive
510006754€30.99
Référence article: 510006754 Produit: 1:35 Pz.Kpfw. VI Ausf. E late production Le Panzerkampfwagen VI Ausf. Tiger I est certainement l'un des chars de combat les plus célèbres de la Seconde Guerre mondiale. Il fut développé pour équiper les divisions blindées de la Wehrmacht d'un char de combat lourdement blindé et lourdement armé pour accompagner les chars moyens Panzer III et Panzer IV qui étaient les plus répandus mais qui n’étaient plus en mesure de combattre efficacement les chars adversaires. L'armement principal était constitué du célèbre et létal canon antichar longue portée KwK 36 L / 56 de 88 mm. Installé dans la tourelle et protégé par un lourd bouclier de 120 mm, il était capable de perforer, même à une longue distance, le blindage de n’importe quel engin ennemi de l'époque. Il a été déployé sur tous les principaux théâtres d'opérations et a participé activement aux opérations militaires allemandes en Normandie et sur le front occidental. Bien que conditionné par des problèmes de fiabilité et d’emploi, le char lourd, aux mains d'équipages expérimentés, a toujours été extrêmement redouté par les forces alliées. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 Conteneur militaire 20
510006516€21.99
Article number: 510006516 Product: 1:35 20' Military Container Model Dim.: 17,4 cm 100% NEW MOULD Decals for 3 versions The 20-feet freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container – in terms of size, volumes and loading capacity – makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has became more effective and faster. Even the warehouses and stocking areas management became easier and more flexible.Thanks to its features and flexibility the 20-feet container has been adopted by several Armies to optimize the logistic and the ground support activities.
Maquettes chars
1:35 Dt. Sd.Kfz.138 Marder III Ausf. H
510006566€31.99
Article number: 510006566 Product: 1:35 Dt. Sd.Kfz.138 Marder III Ausf. H The tank destroyer Marder III Sd.Kfz. 138 was developed for the Wehrmacht on the basis of the now obsolete Czechoslovak-made Panzerkampfwagen 38(t). It went into production in 1942 for the needs of the eastern operation area and was used on all fronts until the end of the war. A major improvement was the installation of an effective 75 mm anti-tank gun protected by a slanted steel shield. In order to better protect the soldiers, the engine was placed in the rear part of the vehicle and the weapon system in the middle. With the Marder III, the Wehrmacht had an easy-to-manufacture tank destroyer with high firepower that was capable of fighting the most important tanks of the time. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35 Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Dt.Panzerjäger I 4,7cm PaK(t) Early
540006259€84.99
Article number: 540006259 Product: 1:35 Dt.Panzerjäger I 4,7cm PaK(t) Early The Panzer I was most definitely a product of the 1930s. Therefore, even as WWII kicked off in September 1939 with the invasion of Poland, the Pz.Kpfw.I was obsolete as a tank with its thin armor and light armament of only two machine guns. Nonetheless, it still saw combat early in the war. Instead, perhaps its greatest contribution to Germany’s war effort was its basis for a whole plethora of special vehicle conversions. Now we are gathering an assortment of several plastic kits in 1/35 scale of these interesting Panzer I-based armored vehicles. Three exciting models represent the little Panzer I in quite different guises. They all share the same intricate Panzer I-family chassis, but from there onwards they diverge into an array of interesting vehicle types. Their superstructures and weapons are distinctly unique, and this makes each vehicle an attractive modeling subject in its own right. They may be small, but they are crammed with stunning detail and they’ll be a treat to assemble and paint. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 Georgian Legion (Normandy 1944)
540006277€16.79
Article number: 540006277 Product: 1:35 Georgian Legion (Normandy 1944) We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Maquettes chars
1:35 Ger. Chasseur de chars I
510006577€31.99
Article number: 510006577 Product: 1:35 Ger. Panzerjäger I Model Dim.: 12,6 cm NEW GLUEABLE RUBBER TRACKS - DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET - PHOTO-ETCHED FRET CONTAINS 1 FIGURE The self-propelled Panzerjager I tank destroyer was built on the hull of the Panzer I light tank and armed with an effective weapon of the period, the 47mm Czechoslovakian anti-tank gun. The Panzer I tank had in fact a protection and armament capability no longer in keeping with the operational needs of the German armoured divisions. However, it had good mobility and a robust chassis which was ideal for the positioning of the anti-tank gun, which was sited behind an open steel shield. The Panzerjager I was deployed by the Wehrmacht during the invasion of France, in North Africa and in the early stages of Operation Barbarossa in 1941. It held a goodammunition supply, with over 70 rounds available for gunners. It was systematically replaced during the war bymore heavily armored tank destroyers, better equipped to deal with modern tank armor against which the 47 mm gun proved to be ineffective. Detailed Plastic Kit
Maquettes chars
1:35 Ger. Sd.Kfz.140 Flakpanzer 38 Gep.
510096461€36.99
Le canon automoteur antiaérien Sd. Kfz. 140 Flakpanzer 38 "Gepard" fut développé pendant la Seconde Guerre mondiale sur le châssis du char léger tchécoslovaque Panzer 38(t). Son objectif était de fournir à la Wehrmacht un outil efficace pour protéger les unités blindées et les colonnes en mouvement contre les attaques aériennes.La fiabilité mécanique et la maniabilité offertes par le châssis du 38(t) constituaient la base technique sur laquelle était monté un canon antiaérien Flak 38 de 20 mm, installé sur une plateforme rotative blindée pour protéger l’équipage. L’arme principale fut également utilisée contre des positions fixes et en soutien des troupes au sol lors de combats rapprochés. Progressivement, le Flakpanzer 38 fut complété dans son rôle antiaérien par d’autres véhicules automoteurs dotés d’une puissance de feu supérieure, tels que le Wirbelwind et l'Ostwind. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Ger. Sd.Kfz.234/1 (2cm)
510006757€36.99
Les automitrailleuses de la série Schwerer Panzerspähwagen Sd.Kfz. 234 furent produites par l'industrie de guerre allemande durant la phase finale de la Seconde Guerre mondiale. Elles se distinguaient par un niveau élevé de qualité de fabrication, alliant mobilité, flexibilité opérationnelle et capacité offensive. Le projet représentait un excellent compromis entre vitesse sur tout type de terrain, protection et puissance de feu, incarnant la synthèse de l’expérience opérationnelle acquise par la Wehrmacht au cours des premières années du conflit. Elles pouvaient atteindre une vitesse maximale de 85 km/h sur route. Parmi les différentes variantes produites, le Sd.Kfz. 234/1 jouait fréquemment le rôle de véhicule de commandement. Également utilisé pour des missions de reconnaissance avancée, il était équipé d’un canon de 20 mm KwK 30 monté sur une tourelle ouverte, capable de fournir un appui-feu à l’infanterie contre des cibles faiblement blindées. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 German Combat Unit (Normandy 1944)
540006003€16.79
Article number: 540006003 Product: 1:35 German Combat Unit (Normandy 1944) We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Figurines militaires et accessoires
1:35 German MG42 Heavy Machine Gun Team
540006064€18.99
Article number: 540006064 Product: 1:35 German MG42 Heavy Machine Gun Team We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Maquettes bateaux militaires
1:35 German Sturmboat w/Pioniere
540006108€21.49
Article number: 540006108 Product: 1:35 German Sturmboat w/Pioniere German Pioniere, also known as combat engineers, were involved in a wide range of operations during WWII. They carried out their duties with specialized tools and equipment. We have carefully chosen a few items that showcase the equipment used by these Pioniere for reproduction. Among them are the raft and sturmboat, which are particularly valuable and inspiring for modelers to create their own dioramas.
Figurines militaires et accessoires
1:35 German Tank Crew 1944/45
540006014€14.29
Article number: 540006014 Product: 1:35 German Tank Crew 1944/45 We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Maquettes chars
1:35 German3t 4x2CargoTruck w/2cm FlaK38
540006828€71.99
Article number: 540006828 Product: 1:35 German3t 4x2CargoTruck w/2cm FlaK38 We will be reissuing our popular 1/35 scale German 3t 4x2 truck (2-in-1 kit) once again. This cargo truck was widely used during World War II, it provides an exciting opportunity for modelers to create imaginative dioramas. The 2024 reissue will include a figure set featuring a driver and riders. Additionally, the kit will come with metal width indicator poles. Being a 2-in-1 kit, modelers will have the option to assemble the truck with a 2cm FlaK 38 anti-aircraft gun mounted in the rear cargo bed. For maximum authenticity of the anti-aircraft gun, a 3D-printed muzzle-brake will also be available. This allows modelers to further detail and upgrade the FlaK 38. Overall, this reissue of the German 3t 4x2 truck promises to be an exciting release that will cater to a wide range of modelers, from those interested in creating realistic transportation vehicles to those seeking to build engaging diorama scenes. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 Gren.,Pz.Gren.Rgt.25,HJ Div.(1944)
540006110€16.79
Article number: 540006110 Product: 1:35 Gren.,Pz.Gren.Rgt.25,HJ Div.(1944) We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Figurines militaires et accessoires
1:35 Grenadiers allemands Prusse orientale 1945
540006057€16.79
Article number: 540006057 Product: 1:35 German Grenadiers East Prussia 1945 When Germany invaded Russia on 22 June 1941, the Eastern Front (from Germany’s geographical perspective) was opened and it was to become the greatest conflagration in human history. Fighting on the Ostfront was a brutal affair, and it eventually became the main cause of Germany’s defeat. Now Dragon has brought together a collection of eight 1/35 scale figure sets that portray German soldiers fighting on the deadly Eastern Front in the late-war period from 1944 through to mid-1945. There are some favorite classics among these kits, plus half of them are finely detailed Gen2 figure sets. The plastic figures depict German soldiers in different parts of the Ostfront in different weather conditions, defending vigorously as they make the long retreat back towards Germany. All figures are sharply molded and authentically sculpted, and this assortment allows modelers to restock these versatile subjects. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 HEMTT Gun Truck
510106510€41.99
Article number: 510106510 Product: 1:35 HEMTT Gun Truck Model Dim.: 28,0 cm FULLY UPGRADE MOULDS Decals for one version The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. In a lot of conflicts, as in Iraq and Afghanistan, it has been often modified by the field workshops, on the specific requirements of the crews, in order to be more and more effective in the hard operating environments, Furthermore some HEMTT versions have been modified to be used in escort and convoys protection duties. Some additional protections and defensive weapons have been add on.
Maquettes chars
1:35 HMMWV M966 TOW Carrier
510006598€24.99
Référence article: 510006598 Produit: 1:35 HMMWV M966 TOW Carrier Le véhicule à roues développé pour l'armée américaine HMMWV, acronyme de High Mobility Multipurpose Wheeled Vehicle, et plus connu sous le nom de « Humvee », constitue l'évolution technologique du « savoir-faire » américain en matière de construction de véhicules tout-terrain extrêmement flexibles dont le « Willys » est encore aujourd'hui l'icône. Le véhicule « Humvee » est entré en production dans les années 1980 et se caractérise par sa grande taille et sa flexibilité opérationnelle grâce à ses quatre roues motrices et à sa construction robuste en mesure de résister à un environnement et à des conditions d'utilisation difficiles. Plusieurs versions ont été produites et utilisées pour le transport de troupes, la logistique militaire, la reconnaissance avancée et l'acquisition de cibles. La version M966 Tow Carrier était équipée d'un système de missiles Tow monté sur le toit du véhicule afin d'augmenter le potentiel offensif de l’Humvee contre les véhicules blindés.
Figurines militaires et accessoires
1:35 Horse-Drawn 2,8cm sPzB41 AT Gun&JFB
540006079€30.99
Article number: 540006079 Product: 1:35 Horse-Drawn 2,8cm sPzB41 AT Gun&JFB Here comes a reproduction of three small German transports for specific purpose during the WWII. First, we have the horse drawn Infanteriekarren, a compact cart capable of carrying infantry equipment, weapons, and munitions, while the Borgward IV Ausf.A is a specialized demolition charger vehicle. The last one Kettenkrad mounted with cable reels is a unique vehicle ensuring communication lines. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Howitzer M1 155mm avec équipage
510006581€28.49
Article number: 510006581 Product: 1:35 M1 155mm Howitzer with crew Model Dim.: 20,9 cm With Artillery Crew - 6 figures included In the years leading up to World War II, the United States undertook a complete modernization of the army's artillery capabilities to increase their efficiency and effectiveness. Whilst great attention was paid to ammunition and artillery trailers, one outcome of this modernization project was the development of the 155/23 howitzer. It was first produced in 1942 as a medium artillery piece and served the US Army throughout the Second World War. It could use different types of ammunition and had a maximum range of 14,600 meters. Very robust and reliable, it also proved to have good operational longevity. It was in fact used by the U.S. Army post WW2 during the Korean War, and indeed during the Vietnam War before eventually being replaced by the more modern M198. Detailed plastic kit in scale 1:35
Maquettes chars
1:35 IT WW2 PzKpfw.VI Tiger I Ausf.E mP.
510006507€39.99
Article number: 510006507 Product: 1:35 IT PzKpfw.VI Tiger I Ausf.E mP. Model Dim.: 24,1 cm - UPGRADED MOULDS - - Figure not included - Parts for two variants - Photo-etched fret and link by link tracks included - Decals for 4 versions The Tiger I tank, which has been produced in the second half of 1943, was based on the hull of the firstoperational version used in North Africa and Russia. At the beginning this tank had wheels with rubber rim,which will be replaced in the following productions starting from February 1944, but it was equipped withthe new turret with increased protection and better cupola for the commander. Besides some of thesevehicles maintained the characteristic system of dust filters Feifel, and the smoke grenade launchers. On thetanks produced since August 1943 was also applied a magnetic mine paste that will become standard on alltanks of the German Army.
Maquettes chars
1:35 Kfz.12 Horch 901 typ 40 Frühe Ausf.
510006597€25.99
Un ambitieux projet de mécanisation des forces armées allemandes fut lancé dès le milieu des années 30. En effet, il était considéré comme stratégique d'équiper la Wehrmacht d'un véhicule militaire standard à même d'optimiser la mobilité des troupes sur routes et terrains accidentés. Parmi les différentes versions proposées la voiture moyenne à quatre roues motrices, fabriquée par Opelwerke et par Auto Union, eut une importante diffusion. Le châssis moyen fut équipé dans différentes configurations pour l'adapter au transport des troupes, à la traction de remorques, pour la reconnaissance et, notamment pour répondre aux besoins des départements spécialisés dans les transmissions. Le Kfz. 12, construit par la société Horch (Horch faisait partie du groupe Auto Union avec Wanderer, Audi et DKW), s'est avéré, grâce à sa conception simple mais efficace, très fiable et robuste dans n'importe quel environnement d'exploitation. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 KPz Leopard 1A5 WA
510006481€34.99
Le char d’assaut Leopard 1, entré en service autour de la moitié des années 60, a représenté la clé de voûte des cuirassés de l'Allemagne fédérale et de différentes forces armées et est né pendant la période de la « Guerre froide ». Le rôle du Leopard était essentiel, car il avait pour tâche d'affronter les immenses masses de chars d'assaut éventuellement déployés par les armées du Pacte de Varsovie. Il était armé du canon testé L7 de 105 mm, pouvant utiliser différents types de munitions. La version A5 est une nette amélioration avec l'adoption d'une tourelle modifiée capable d'accueillir les nouveaux systèmes informatisés d'identification des cibles et de conduite de tir. Un blindage supplémentaire en polycarbonate composite a également été adopté, augmentant considérablement la protection et la résistance aux coups.
Maquettes chars
1:35 Lance-roquettes 15cm 42 sur SWS
510006562€31.99
Article number: 510006562 Product: 1:35 15cm Panzerwerfer 42 auf SWS Length of the model 198 mm NEW DECAL SHEET The Schwerer Wehrmachtschlepper (SWS) was developed as a medium half-track and used to transport supplies to front-line troops or as a towing vehicle for the light artillery. However, on the large rear flat load compartment some other applications have been developed. One modification was the Panzerwerfer 42 auf SWS, a 10 barreled 15 cm Nebelwerfer 42 rocket launched placed over an armored ammunition storage compartment. The rocket launcher, developed as device to create smoke screens, was soon used as real artillery able to launch high-explosive ammunitions. It could shoot the rocktes with impressive and deadly. Detailed Plastic Kit of model 15cm Panzerwerfer 42 auf SWS in scale 1:35
Maquettes bateaux militaires
1:35 LCM 3 (Landing craft mechanized)
510006755€51.99
Référence article: 510006755 Produit: 1:35 LCM 3 (Landing craft mechanized) Les Landing Craft Mechanized (LCM) sont probablement les engins de débarquement les plus célèbres de l'histoire, leur profil étant étroitement lié aux opérations amphibies des Alliés pendant la Seconde Guerre mondiale, d'Anzio aux plages de Normandie. La version LCM-3 est certainement parmi les plus réussies et efficacement utilisées. La conception était simple et linéaire mais extrêmement rationnelle. La grande rampe de chargement avant permettait le débarquement rapide d'une équipe d'infanterie entièrement armée ainsi que d'un char moyen Sherman de 30 tonnes. L'armure était très légère, protégeant le moteur diesel, ce qui permettait à l'LCM d'atteindre une vitesse maximale de 8 nœuds, et l'équipage nécessaire pour la navigation et la défense rapprochée, composé de quatre hommes. Cependant, sa capacité de chargement et sa flexibilité opérationnelle étaient significatives, permettant à l'LCM-3 de se tailler une place importante dans l'histoire militaire du XXe siècle. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes bateaux militaires
1:35 LCVP avec infanterie américaine
510006524€62.99
Article number: 510006524 Product: 1:35 LCVP with US Infantry Model Dim.: 31,4 cm NEW SOLDIERS MOULDS D-DAY SERIES THE BOX CONTAINS 30 FIGURES Decals for 8 versions Developed by Higgins Industries of New Orleans on the basis of a flat-bottomed boat used in the Louisiana marshlands, the LCVP (Landing Craft, Vehicle and Personnel) took part in all the major amphibious operations of Second World War, in Europe and the Pacific. Its task was to shuttle back and forth between the big ships and the beaches, carrying up to thirty men, light vehicles and anything else that was needed. Generally armed with two rear-mounted machine guns, it was powered by a 250 HP Hall Scott petrol engine or a 225 HP Gray diesel engine. After the end of the Second World War the LCVP stayed in service, occupying a number of roles. It saw action in Korea and Indochina and has also been adapted for civilian use all over the world. D-Days Series Box contains 30 figures
Maquettes chars
1:35 Leopard 2 A4 War Thunder
510035106€37.99
Le Leopard 2 a été développé dans les années 1970 afin de fournir aux forces blindées de l’Allemagne de l’Ouest un char de combat moderne et performant, capable de remplacer le Leopard 1. Armé d’un canon de 120 mm, il est propulsé par un moteur turbo-diesel 12 cylindres, lui permettant d’atteindre une vitesse maximale de 68 km/h. Entré en service en 1979, il reste aujourd’hui, grâce à ses nombreuses évolutions intégrant des améliorations constantes en matière de technologie, d’armement et de protection, l’un des meilleurs chars de combat principaux (MBT) au monde. Le Leopard 2A4, en particulier, représente une amélioration significative par rapport aux premières versions. Il est équipé d’un canon Rheinmetall L/55 de 120 mm et d’une protection en matériaux composites. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Leopard 2A4
510006559€34.99
Article number: 510006559 Product: 1:35 Leopard 2A4 Model Dim.: 27,6 cm SUPER DECALS SHEET FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET - NEW GLUABLE RUBBER TRACKS Entered into service between the late '70s and early' 80s the Leopard 2 is considered one of the best armored vehicles in the world. It has been developed to offer the German "Bundeswehr" a powerful and modern Main Battle Tank able to replace the Leopards 1. The main armament is the 120mm. Rheinmetall L/55 smoothbore gun. Despite is heavy armor, the Leopard 2 is able to reach a significant speed of 65 km/h and it has a good performance on every kind of terrains. From the first versions, the MBT has been constantly improved and updated. The Leopard 2 A4, one of the most widespread version, is adopting an advance fire control system and modern hi-tech materials able to increase the protection capability. A part Germany, the Leopard 2 was able to achieve a good commercial success in many countries as Holland, Turkey, Austria, Greece and many others. Detailed Plastic Kit of model Leopard 2A4 in scale 1:35
Maquettes chars
1:35 LVT-4 Wasserbüffel
510006752€36.99
Les véhicules chenillés L.V.T. (acronyme de Landing Vehicle Tracked) ont été développés pour équiper les forces armées américaines, l'armée et le corps des Marines, d'un engin adapté aux opérations amphibies capable d'offrir un bon niveau de protection. Souvent connus sous le nom de "Amtrac", ils ont été largement utilisés dans le théâtre d'opérations du Pacifique, contre les forces japonaises, mais aussi au cours de la dernière année de guerre sur le théâtre européen. L'LVT-4 constituait, en particulier, une nette amélioration par rapport aux versions précédentes. Avec la redéfinition du projet, le moteur a été déplacé en position centrale, libérant ainsi l'arrière du véhicule pour l'adoption d'une rampe permettant de charger et décharger rapidement des véhicules légers ou des pièces d'artillerie de petit calibre à l'appui des troupes de débarquement. Ce fut la version la plus réussie avec le plus grand nombre de véhicules produits. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 M-47 Patton
510006763€30.99
Le char moyen M-47 Patton a été développé et déployé auprès des unités blindées américaines dans la première moitié des années 1950. Par rapport à ses prédécesseurs, comme le M-46, il offrait des performances nettement supérieures, avec une meilleure protection et une puissance de feu accrue, assurée par le canon M3 de 90 mm monté sur la tourelle. Le char pesait environ 46 tonnes en ordre de combat et était équipé d'un puissant moteur Continental V12 refroidi par air, développant 810 chevaux, ce qui lui permettait d’atteindre une vitesse de 45 km/h. En plus des États-Unis, il a été utilisé par de nombreuses armées de l’OTAN pendant la guerre froide. Fiable et robuste, il a servi pendant de nombreuses années au sein des unités blindées de plusieurs armées européennes jusqu’aux années 1980. Il a également été engagé dans divers conflits, du Moyen-Orient à la guerre indo-pakistanaise. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes bateaux militaires
1:35 M.A.S. 568 4a Torpedoboat avec équipage
510005626€114.99
Article number: 510005626 Product: 1:35 M.A.S. 568 4a Torpedoboot m. Crew Since First World War the Italian Regia Marina was deserved great attention to the development of small and rapid vessels generally armed with torpedoes. The moto torpedo boats, more known as MAS, were civilian vessels variants. The results achieved during First World War were remarkable with the sinking, on behalf of Commandant Luigi Rizzo, of the Austro-Hungarian Marine cruiser Wien and Szent István. Neither less were more suitable for confined seas nor shallow water like the Adriatic Sea, the Italian Marine continued working to improve the performance of the small but fast moto torpedoes. The MAS 500, equipped gasoline engines Isotta-Fraschini, build during Second World War and more powerful and reliable, were deployed both as moto torpedoes and anti-submarine platforms for depth charges dropping. Capable of reaching a top speed of 40 notches and armed with two 450mm torpedoes. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35
Maquettes chars
1:35 M110 Self Propelled Howitzer (pistolet à propulsion autonome)
510006574€31.99
Article number: 510006574 Product: 1:35 M110 Self Propelled Howitzer Model Dim.: 25,8 cm Decal for 1 versions The self-propelled guns of the M-110 series have represented, for many years, the backbone of the field artillery of the United States Army. They were also largely used by the American Allied Countries. It entered service in the ‘60s but thanks to the improvements made in 1977 on the M-110 A1 version, it acquired improved operational efficiency. The M-110 A1 was armed with the new 203 mm long range M201 gun able to use a wide range of ammunitions. The project was characterized by an excellent mix in terms of firepower and mobility thanks to its reliable chassis (the same of the M-107). The M-110 A1 was deployed in the division artillery to perform tasks as general support, counter-battery fire and suppression of enemy positions. It was widely used during the conflict in Lebanon and during the first Gulf war. Detailed Plastic Kit
Maquettes chars
1:35 M1A1 Abrams War Thunder
510035108€37.99
Le char d’assaut de troisième génération M1 Abrams constitue l'épine dorsale des divisions blindées de l'armée Américaine et du Corps des Marines. L'Abrams se caractérise par son blindage lourd (il compte parmi les véhicules de combat les plus lourds au monde) et l'adoption du puissant moteur à turbine multi-carburant. Une grande attention a été portée à la protection de l'équipage grâce au dépôt de munitions séparé et fortement protégé. Le M1 Abrams, qui est entré en service opérationnel au début des années 80 pour remplacer les anciens M-60, offre un système sophistiqué de conduite de tir et un blindage moderne. D'abord armé d'un canon de 105 mm, il a ensuite été équipé du canon de 120 mm le plus moderne et le plus puissant avec un tube lisse capable d'utiliser une variété différente de projectiles. L'Abrams a été largement utilisé, avec une efficacité létale, sur tous les grands théâtres opérationnels, du Moyen-Orient à l'Afghanistan, s'avérant être supérieur à tout autre char adverse. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 M24 Chaffee
510006761€30.99
Le char M24 Chaffee a été distribué aux unités de l'armée américaine à partir de 1944 pour fournir sur le champ de bataille un char léger capable de remplacer l'ancien M3/M5 Stuart. La configuration du M-24 était en effet très différente de celle de son prédécesseur, et son design s'est avéré extrêmement efficace, au point qu'il peut être considéré comme l'un des meilleurs chars légers jamais construits. Agile, robuste et fiable, il était, pour un "Light Tank", bien armé, étant équipé d'un canon M6 de 75 mm avec 48 obus à disposition. L'armement du char était complété par deux mitrailleuses Browning de 12,7 mm. Il a également été utilisé avec succès dans des missions de soutien rapproché à l'infanterie et pour effectuer des tâches de reconnaissance avancée. Au cours du conflit, une coopération efficace a été développée entre les unités de M-24 et des véhicules blindés plus lourdement armés, comme le Sherman dans ses différentes versions. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 M3A1Half-Track (3 in 1) ass.M3/M3A1
540006332€84.99
Article number: 540006332 Product: 1:35 M3A1Half-Track (3 in 1) ass.M3/M3A1 The armored M2 and M3 halftracks series were widely used in WWII. This small collection comprises four individual plastic kits built accurately in 1/35 scale: M2A1, M3A1, M16 and M3 75mm GMC. These well-known vehicle types saw combat in nearly every theater of WWII, including the jungles of Asia-Pacific, the hot deserts of North Africa, and the forests and cities of Europe. Fortunately, that means there will be no shortage of imaginative ideas for diorama makers. This quartet contains classic and popular kits from Dragon, some of which are very difficult to get hold of nowadays. Consequently, modelers should certainly be making tracks to their nearest hobby store as soon as this fine assortment of American halftracks hits the shelves! Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 M4A1 Early Version
540006701€84.99
Article number: 540006701 Product: 1:35 M4A1 Early Version It marks 80th anniversary of the Normandy Campaign in June this year. To commemorate this historic event, Dragon has planned to produce items that are related to the campaign. After several production runs of 1/35 scale figure sets, we are now introducing the Allied tanks. The first release will be a M4A1 Early Version. This new M4A1 not only boasts promising details, but also includes several new features that make it the perfect representation of the M4A1 tank that saw combat in Normandy. Main Features: - Magic Track - Aluminum gun barrel w/rifling inside - 3D printed applique armor plates - 3D printed headlight and horn guards - Copper cable Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 M4A1 Sherman avec l'infanterie américaine
510006568€37.99
Article number: 510006568 Product: 1:35 M4A1 Sherman with U.S. Infantry Length of the model 167 mm CONTAINS 10 FIGURES - NEW GLUEABLE RUBBER TRUCKS - SUPER DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units and it formed the backbone of United Stated armoured forces during at those time. It has been produced in several variants and versions. The first version to be produced on wide scale was the Sherman M4A1 characterised by the rounded edges of the fully casted upper hull. Even the turret had a rounded appearance. The Sherman would entered combat in armoured corps of United States Army in 1942 during the first months of the war. It was armed with the 75 mm gun that was replaced in the latest A1 version with the high-speed 76 mm gun. Thanks to its Continental R975 gasoline engine the tank was able to obtain good performances on all type of terrains. However the most important strength of the tank was its project. The Sherman was reliable, cheap and easy to produce in great numbers. Detailed Plastic Kit
Figurines militaires et accessoires
1:35 M4A1(76)W "Operation Cobra"
540006083€84.99
Article number: 540006083 Product: 1:35 M4A1(76)W "Operation Cobra" After the production of Allied force figure sets for the Normandy Campaign, we are now focusing on the prominent tank of the Allied Force, the Sherman. We have selected items 6511 M4 75mm and 6803 M4A1(76)W for a production. Both tanks have undergone upgrades, including the addition of Magic Track, 3D-printing headlight and horn guards, copper cable and aluminum gun barrel w/rifling inside. The 6083 M4A1 even showcases 3D-printing duckbill end connectors. These two upgraded Shermans are now fully prepared for any Normandy campaign dioramas envisioned by modelers. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 M4A3E8 Sherman "Fury" (Fureur)
510006529€41.99
Article number: 510006529 Product: 1:35 "M4A3E8 Sherman Fury" Model Dim.: 16,8 cm Fully upgraded moulds The box contains 2 track versions made by a new raw material which can be glued and painted. The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units ant it formed the backbone of United Stated armoured forces during at those time. it has been produced in several variants and versions The production of the M4A3E8 versions started at the end of 1944. The M4A3E8, adopting the nickname Easy Eight, took several technical improvements enhancing the Sherman operational effectiveness. The 76mm M1 high velocity gun had been flanked by a new horizontal volute spring suspension (HVSS) system able to ensure a better driving condition and to guarantee a higher speed. The "Easy Eight" participated to the final stages of World War II and took active part in the Korean War. Detailed Plastic Kit of model M4A3E8 Sherman "Fury" in scale 1:35
Maquettes chars
1:35 M6 Dodge Anti-Tank
510106555€20.99
Article number: 510106555 Product: 1:35 M6 Dodge Anti-Tank Model Dim.: 12,9 cm COLOR INSTRUCTION SHEET The Gun Motor Carriage M6 was developed on the famous 4x4 Dodge WC52 frame adopting, on the rear deck, a 37 mm. light anti-tank gun. Thanks to its Dodge T-214 6 cylinders engine the M6 was able to reach, on road, the speed of 90 Km/h. The United States Army used GMC M6 from the late 1942 up to the end of World War II on all the operating theaters as the Mediterranean, the European front and the Pacific. The GMC M6 was set up and developed to be anti-tank vehicle but, since the first clashes in Tunisia, its light gun was often ineffective against the most recent German tanks protections. Its main role was partially changed and the M6 started to be used as infantry support vehicles. Detailed Plastic Kit of model M6 Dodge Anti-Tank in scale 1:35
Maquettes chars
1:35 M923 Hillbilly Gun Truck
510006513€31.99
Article number: 510006513 Product: 1:35 M923 Hillbilly Gun Truck Model Dim.: 24,8 cm UPGRADED MOULDS Decals for one version This medium cargo truck of the 5 ton category, is representative of today's generation of logistical vehicles of the U.S. Forces. It entered service in the early eighties. The M-923 has an extremely sturdy structure and excellent off-road features, which are necessary to secure the flow of material to the front line combat units. Based on this chassis many versions have been produced: wrecking trucks, tank trucks, mobile maintenance and communication trucks. The A-1 version is characteristic because of its large off-road tires which have earned it the nick-name "big-foot". During its operational use, and in particular in the most recent military campaigns in which it was employed as Iraq and Afghanistan, the "Big Foot" has often been modified with the addition of "home made" protections to reduce the damages caused by the fire of light weapons. However, the personalization of the vehicles, made "on field" by the crews, were possible thanks to the excellent platform offered by-M-923 trucks.
Maquettes chars
1:35 Mod. US M978 Fuel Service Truck
510006554€48.99
Article number: 510006554 Product: 1:35 Mod. US M978 Fuel Service Truck Model Dim.: 29,7 cm UPGRADED MOULDS - COLOR INSTRUCTIONS SHEET - NEW RIMS AND RUBBER TYRES The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. The outfitted versions, as the M978 Tanker, has been designed to perform, in a very precise and effective way, the different military logistic needs. Thanks to the loading capacity of over 9,500 liters, the tank installed on the vehicle is able to transport a significant quantity of fuel. The M978 has been effectively used by the U.S. Army in various severe operational areas such as Iraq and Afghanistan. Detailed Plastic Kit of model Mod. US M978 Fuel Service Truck in scale 1:35
Figurines militaires et accessoires
1:35 Panzergrenadiers, Panzer Lehr Div.
540006111€18.99
Article number: 540006111 Product: 1:35 Panzergrenadiers, Panzer Lehr Div. The Normandy invasion marked the beginning of the Allied Forces' counterattack on continental Europe. This year commemorates the 80th anniversary of this monumental seaborne landing, the largest in human history. Dragon have released a wide range of 1/35 figure sets depicting the intense battles that took place in Normandy in 1944. As the first phase of a series of figure set reproductions this year, we have carefully selected some sets focusing on the defensive side. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Partisans
510006556€12.49
Article number: 510006556 Product: 1:35 Partisans From ESCI Original Moulds During the German occupation of European countries in WW2 a key role was played by local ‘partisan’ groups. The partisans often had different ideals and political motivations but were united by the same goal to assist with the effort to secure victory against the German occupying forces. The type of operations conducted by partisan groups were wide-ranging, including both intelligence gathering and support activities to Allied forces, particularly in relation to acts of sabotage against the enemy's logistics and communications infrastructures. Detailed Plastic Kit
Figurines militaires et accessoires
1:35 Pz-Pionier-Bata.37 1.Pz-Div.Leni'41
540006651€18.99
Article number: 540006651 Product: 1:35 Pz-Pionier-Bata.37 1.Pz-Div.Leni'41 German Pioniere, also known as combat engineers, were involved in a wide range of operations during WWII. They carried out their duties with specialized tools and equipment. We have carefully chosen a few items that showcase the equipment used by these Pioniere for reproduction. Among them are the raft and sturmboat, which are particularly valuable and inspiring for modelers to create their own dioramas.
Maquettes chars
1:35 Pz.Bef.Wg.III Ausf.J /Pz.III Ausf.J
540006628€88.99
Article number: 540006628 Product: 1:35 Pz.Bef.Wg.III Ausf.J /Pz.III Ausf.J This is a 2024 upgraded version of the 1/35 scale German Pz.Bel.Wg.III Ausf.J model. This latest version includes a metal gun barrel that boasts realistic rifling inside. Another eye-catching enhancement is the addition of metal smoke grenade racks and dischargers. As an upgraded kit, it also incorporates the well-received Magic Track, renowned for its ease of assembly. The most special feature of this release is that it’s a 2-in-1 kit. Modelers have the freedom to choose between building either a Pz.Bel.Wg.III Ausf.J or a Pz.III Ausf.J (Tp) Early Production variant. Both versions are rendered with an exceptional level of 1/35 scale detailing. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Pz.Bef.Wg.IIIAusf.K (2024Upgr.Vers)
540006853€88.99
Article number: 540006853 Product: 1:35 Pz.Bef.Wg.IIIAusf.K (2024Upgr.Vers) Unlike other Panzer III Command tanks, the Pz.Bef.Wg.III Ausf.K was equipped with a 5cm KwK39 L/60 cannon. Featuring a Panzer IV turret mounted on a Pz.III chassis, it is distinctly set apart from other command tanks in the German Army. The uniqueness of this vehicle makes it popular among modelers. Dragon released a 1/35 scale kit of the Pz.Bef.Wg.III Ausf.K a few years ago, and now it's time for a re-release with an upgraded version. The 2024 edition features newly added Magic Tracks, which will facilitate easier assembly and improved accuracy. An array of photo-etched parts, such as a star antenna, is provided to enhance the level of detail. Additionally, the aluminum gun barrel includes rifling inside. The grenade discharger and its mount are constructed from metal. This upgraded model is sure to be a highly sought-after item, so don't miss your chance - place your order as soon as possible. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Pz.Kpfw.I Ausf.B DAK Version
540006207€77.99
Article number: 540006207 Product: 1:35 Pz.Kpfw.I Ausf.B DAK Version The Pz.Kpfw.I Ausf.B DAK version has received an exciting upgrade! The 2024 version now incorporates the updated parts for its configuration, road wheels and etc. Moreover, it’s upgraded with the highly coveted Magic track, providing modelers with enhanced convenience and user-friendliness. What's more, interior details of the compact fighting compartment and turret are accurately rendered. To further elevate the authenticity, a wide range of photo-etched parts is available for upgrading jerry cans, road wheels, and other components. This light tank has undoubtedly become one of the most sought-after items among modelers, given its absence from the market for over a decade. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Quad Gun Trailer M55
540006421€29.99
Article number: 540006421 Product: 1:35 Quad Gun Trailer M55 The M55 Quad Gun Trailer is a rare anti-aircraft gun from the Allied forces in our product line. With meticulous engineering and design, it has been faithfully reproduced with accurate details. It is another highly anticipated item, considering its last release was a decade ago. Now, it presents a great opportunity for modelers to acquire it and enhance their collections. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes bateaux militaires
1:35 S.L.C. Maiale 200 m. Équipage (2)
510005621€28.99
Article number: 510005621 Product: 1:35 S.L.C. Maiale 200 m. Besatzung (2) Based upon the experiences and successes of the Italian Regia Marina in the First World War. In 1935 Teseo Tesei and Elios Toschi developed and perfected the Siluro a Lenta Corsa (S.L.C.), which was more informally known as "Maiale" (Pig). This was a torpedo modified to allow it to be guided underwater by two operators equipped with respirators. It was intended to carry a high explosive warhead under the keel of enemy ships. The modified torpedoes had limited speed, were fitted with a guidance system and held batteries that powered the electric motor which guaranteed a range of 12-15 miles. The most notable action of these Italian Navy raiders took place on 19th December 1941. Transported by the submarine "Scirè" to the strongly defended Alexandria harbour, the S.L.C.’s were able to attack and disable for several months, Royal Navy battleships H.M.S: Valiant and the H.M.S. Queen Elizabeth. Detailed plastic kit in scale 1:35
Maquettes chars
1:35 Sd. Kfz. 10/4 with FLAK 30 and Crew
510006395€33.49
Pendant la Seconde Guerre mondiale, l'armée allemande utilisa des véhicules semi-chenillés, offrant une grande mobilité dans toutes les conditions environnementales et sur tous types de terrains, pour divers usages grâce à des versions et aménagements spécifiques. Le Sd.Kfz. 10/4 fut conçu pour utiliser le canon antiaérien FlaK 30 de 20 mm, monté sur une plateforme renforcée. Il était employé pour protéger les troupes en mouvement ainsi que les convois de chars et de véhicules contre les attaques aériennes ennemies à basse altitude. Ce véhicule pouvait transporter jusqu'à 8 soldats et constituait une solution efficace pour fournir une protection aérienne rapprochée aux troupes au sol. Il était également fréquemment utilisé en soutien des opérations d'infanterie, son canon de 20 mm étant utilisé contre des installations défensives terrestres. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd.Kfz. 171 Panther Ausf. A WA
510000270€36.99
Numéro d’article: 510000270 Produit: 1:35 Sd.Kfz. 171 Panther Ausf. A WA Le Panzerkampfwagen V « Panther » a certainement été l'un des plus célèbres chars de la Seconde Guerre mondiale. Il voit le jour comme une réponse directe aux chars soviétiques T-34 et KV-1 qui surclassèrent, de par leurs prestations et armement, les Panzer III et Panzer IV désormais datés sur le front Est. Fonctionnant avec un moteur V-12 Mayback de 700 chevaux, il était armé du canon KwK de 42 à 75 mm, à grande vitesse, très efficace surtout pour l'emploi antichar. Grâce au projet valide qui optimisait la protection, avec l’adoption de l’armature avant inclinée, la mobilité, la vitesse et l’armement, le Panther peut être considéré comme l’un des meilleurs chars de la Seconde Guerre Mondiale, et fut utilisé sur tous les principaux fronts de l’Italie à la France, ou encore le front Est.
Maquettes chars
1:35 Sd.Kfz. 234/3 Heavy Recon. Veh.
510006756€35.99
Référence article: 510006756 Produit: 1:35 Sd.Kfz. 234/3 Sw. Panzerspähwagen Les véhicules blindés de la série Schwerer Panzerspähwagen Sd.Kfz. 234 ont été produits par l'industrie de guerre allemande dans la phase finale de la Seconde Guerre mondiale. Ils se caractérisaient par un haut niveau de qualité de construction qui combinait mobilité, flexibilité opérationnelle et capacité offensive. Le projet représentait un excellent compromis entre la vitesse sur tous types de terrains, la protection et la puissance de feu, et il a su synthétiser l'expérience opérationnelle acquise par la Wehrmacht au cours des premières années du conflit. Ils pouvaient atteindre une vitesse maximale de 85 km/h sur route. Parmi les différentes versions produites, le Sd.Kfz. 234/3 était armé d'un canon de 75 mm KwK37 à canon court installé en position fixe dans un compartiment de combat à ciel ouvert, ce qui pouvait être utilisé efficacement en soutien de l'infanterie contre des cibles peu protégées ainsi que contre des véhicules blindés légers.
Maquettes chars
1:35 Sd.Kfz. 305/22 Voiture radio
510006575€29.99
Article number: 510006575 Product: 1:35 Sd.Kfz. 305/22 Funkwagen Model Dim.: 17,1 cm COLOR INSTRUCTION SHEET - RUBBER TYRES The Opel Blitz was the main truck used by German forces during the Second World War. It was deployed extensively on all fronts in huge numbers, and was consequently considered to be the "working mule" of the Wehrmacht. Thanks to the sturdy frame, the robust system of rigid axles with leaf springs and the twin-wheels on the back, the Opel Blitz was able to carry a payload of over 3 tons. The 3,600 cc. engine was easy to maintain and provided 75 hp. The most popular version was the 4x2 with rear wheel drive. However, there was also a 4x4 version that operated both in Russia and the North African desert. Thanks to its flexibility and its wide rear cargo area, the Opel Blitz was also deployed in additional roles including as a mobile command post equipped with radio communications for battlefield management of ground troops. Detailed plastic kit in scale 1:35
Figurines militaires et accessoires
1:35 Sd.Kfz.2/2 kl.Kettenkrad /Feldkable
540006128€37.99
Article number: 540006128 Product: 1:35 Sd.Kfz.2/2 kl.Kettenkrad /Feldkable Here comes a reproduction of three small German transports for specific purpose during the WWII. First, we have the horse drawn Infanteriekarren, a compact cart capable of carrying infantry equipment, weapons, and munitions, while the Borgward IV Ausf.A is a specialized demolition charger vehicle. The last one Kettenkrad mounted with cable reels is a unique vehicle ensuring communication lines. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 Sd.Kfz.234/2 Luchsturm
540006696€84.99
Article number: 540006696 Product: 1:35 Sd.Kfz.234/2 Luchsturm The Sd.Kfz.234/2 Luchsturm is a battlefield-modified variant of the standard Sd.Kfz.234/2 armored vehicle, featuring a "Luchs" turret mounted on top. Dragon’s latest item 6696 features such a unique fighting vehicle in true 1/35 scale. This special 1/35 vehicle is the result of a collaboration between the renowned Japanese manufacturer Asuka and Dragon Models. Main Features: - metal width indicator poles - metal grenade rack - metal grenade dischargers - two different tire options - 3D printed 2cm cannon muzzle brake - commander figure included - photo-etched parts included - turret provided by Asuka As a rare collaborative item, this Sd.Kfz.234/2 Luchsturm model is not to be missed by collectors and modelers. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd.Kfz.234/2 Puma (2024 upgrade ver
540006943€81.99
Article number: 540006943 Product: 1:35 Sd.Kfz.234/2 Puma (2024 upgrade version) Hot on the heels of reproducing two Sd.Kfz.234 items (6772 and 6814), we are now introducing the most popular Sd.Kfz.234/2 Puma for a limited production. This particular item, which is the most sought-after in the entire series, not only boasts impeccable detailing but also incorporates upgrades in this 2024 release. It features a metal barrel, a 3D-printed muzzle brake, a metal smoke-grenade rack and metal greande discharger, metal width-indicator poles, photo-etched parts for side fender hatch lids, and offers modelers a selection of two types of tires with different tread patterns. With its luxurious and irresistible content, this wheeled combat vehicle is bound to be in high demand among modelers once again. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd.Kfz.250 Ausf.A SchützenPzWg. 2/1
540006426€75.99
Article number: 540006426 Product: 1:35 Sd.Kfz.250 Ausf.A SchützenPzWg. 2/1 This new Sd.Kfz.250 kit offers a 2-in-1 option, allowing modelers to build either an Sd.Kfz.250/10 with a 3.7cm PAK or an Sd.Kfz.250/11 with a PANZERBUCHSE 41. Regardless of the variant, the vehicle features a detailed interior. This model incorporates the latest parts from Dragon's Sd.Kfz.250 series, including the upper hull, chassis, interior, road wheels, sprocket, and more. The upgraded Sd.Kfz.250 also features Magic Tracks for easier assembly and improved accuracy. Additionally, the kit includes metal width indicator poles and an array of photo-etched parts for further refinement. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd.Kfz.250/1 le SPW Alte
540006557€75.99
Article number: 540006557 Product: 1:35 Sd.Kfz.250/1 le SPW Alte The initial version of the Sd.Kfz.250 Alte has now been upgraded to the Premium Edition. In comparison to the original one, the premium edition incorporates the latest parts from Dragon's Sd.Kfz.250 series. Additionlly, it features the use of Magic Track for convenient assembly and improved accuracy. The interior of the fighting compartment is equipped with GEN 2 weapons and equipment. Furthermore, metal width indicator poles are included. Given its extensive use during WWII, this enhaanced 1/35 Sd.Kfz.250/1 le SPW Alte is definitely a good choice for modelers to add it into their new diorama plans. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd.Kfz.250/9 NEU 2cm Reconnaissance
540006316€81.99
Article number: 540006316 Product: 1:35 Sd.Kfz.250/9 NEU 2cm Reconnaissance Item No. 6316 accurately depicts the Sd.Kfz.250/9 NEU, which was a reconnaissance halftrack armed with a 2cm KwK38 cannon and an MG34 or MG42 mounted in a small Hängelafette (swing mount) turret. In production from May 1943, this vehicle type replaced the wheeled Sd.Kfz.222. Badged with the Premium Edition name, this upgraded kit features numerous bonus parts such as Magic Tracks, Gen2 soldier equipment and weapons to fill the vehicle interior, as well as metal width indicator poles and a bonus headlight. A photo-etched screen is provided to cover the one-piece slide-molded turret, plus there’s a photo-etched gun shield for the movable weapons. The distinctive stowage box doors on the hull sides are designed as separate parts, allowing modelers to display them either open or closed. This Sd.Kfz.250/9 Neu reconnaissance vehicle is the perfect asset for modelers to explore! Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd.Kfz.251/1 Ausf.D m.7,5cm PaK 40
540006664€84.99
Item 6664 is a new combo set that includes both an Sd.Kfz.251/1 Ausf.D and a 7.5cm PaK 40. Notably, it's also a 2-in-1 kit, allowing customers to assemble either a standard Sd.Kfz.251/1 Ausf.D towing a 7.5cm PaK 40, or an Sd.Kfz.251/22 with the 7.5cm PaK 40 mounted on the fighting vehicle. The interior configurations of both fighting vehicles are faithfully reproduced respectively. This versatile kit meets the latest upgrade standards for the Sd.Kfz.251, featuring Ez-Track, an aluminum gun barrel, a 3D-printed muzzle brake, bonus early-type individual tracks as an option, metal width indicator poles, and three types of tarpaulin as bonus items. The kit provides customers with multiple configuration options to suit their diorama planning needs. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd.Kfz.251/22Ausf.Dw/NightVis.Falke
540006994€84.99
Article number: 540006994 Product: 1/35 Sd.Kfz.251/22 Ausf.D w/Night Vision Falke This new Sd.Kfz.251/22 Ausf.D boasts an impressive level of detail in the open-topped fighting compartment, including the finely-detailed 7.5cm PaK 40 gun. In addition, it is equipped with Night Vision Falke, which helps the crew to easily aim at targets during nighttime combat. The kit includes Ez-Track, photo-etched parts, and metal width indicators. A free figure set of four gun crew is also provided, allowing the modeler to create a realistic diorama straight from the box. Detailed Plastic Kit
Maquettes chars
1:35 Sd.Kfz.251/6 Ausf.C Command Vehicle
540006442€81.99
Article number: 540006442 Product: 1:35 Sd.Kfz.251/6 Ausf.C Command Vehicle The distinctive appearance of the Sd.Kfz.215/6 Ausf.C Command Vehicle has made it one of the popular choices within the Sd.Kfz.251 family. Its frame antenna and collapsible 8-meter rod antenna are iconic features. Our latest 1/35 scale model, the 6442 Sd.Kfz.251/6 Ausf.C, accurately reproduces these characteristic components. This new version also includes Ez Track, which allows for easier assembly without compromising accuracy. Metal width indicator poles are included as well. Additionally, to complement the detailed radio set, the box includes two figures of radio operators. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd.Kfz.251/9 Ausf.D w/7.5cm KwK 37
540006863€84.99
Article number: 540006863 Product: 1:35 Sd.Kfz.251/9 Ausf.D w/7.5cm KwK 37 The Sd.Kfz.251/9 Ausf.D was designed as a support vehicle for mobile armored units and was equipped with a 75mm KwK 37 L/24 howitzer. We are excited to announce the release of a new item for the special variation of the Sd.Kfz.251/9. The characteristic 75mm gun has been accurately rendered with a full breech, and the metal gun barrel has rifling inside. The fighting compartment also features fully detailed interiors. In addition, we have upgraded it with Ez-Track and brass width indicators, and a full set of gun crew is included for free. This is a must-buy for anyone interested in the 251 series. Detailed Plastic Kit
Maquettes chars
1:35 Sd.Kfz.251/9Ausf.C m.7.5cm Kanone37
540006225€87.99
Article number: 540006225 Product: 1:35 Sd.Kfz.251/9Ausf.C m.7.5cm Kanone37 This highly anticipated new item, 1/35 Sd.Kfz.251/9 Ausf.C goes beyond simply bolstering the Dragon’s Sd.Kfz.251 series, it is also a dream come true for modelers. With the inclusion of new injection parts, an abundance of 3D-printed parts, and metal parts, this kit authentically reproduces a Sd.Kfz.251/9 Ausf.C, a formidable fire support vehicle, in a true 1/35 scale model kit. Main features: - New tooled front armor w/3D printing parts - 3D printing gun part - New-tooled gun base - Aluminum gun barrel w/rifling inside - Metal width indicator poles - Ez-track for convenient assembly - Bonus early-type individual track link - 3D printing storage rack Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd.Kfz.253 le.Beob.Pz.Wg.(Smart Kit
540006482€76.55
Article number: 540006482 Product: 1:35 Sd.Kfz.253 le.Beob.Pz.Wg.(Smart Kit) The Dragon’s 1/35 Sd.Kfz.253 has been the only choice available in the market for years, and now the new Smart Kit version of the same vehicle (item 6482) incorporates a range of the most updated parts from the Dragon’s Sd.Kfz.250 series. The new version becomes more accurate and more detailed, surpassing the previous version a lot in every aspect. In addition to the improved parts, this new item also includes Magic Track, Metal Width Indicator Poles and Photo-Etched parts. The box also includes a bonus figure set, which not only adds value to the product but also makes it easier for modelers to envision their diorama. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sd.Kfz.3aMaultierHalfTrack3,7cmFlaK
540006788€77.99
Article number: 540006788 Product: 1:35 Sd.Kfz.3aMaultierHalfTrack3,7cmFlaK Dragon has released different variants of the German Sd.Kfz.3 Maultier, such as cargo truck and ambulance. Each kit has been well received by modelers as they can be used wisely in the modelers dioramas of various battlefields. Now, Dragon is going to offer a special version of the "Mule", which features a lethal 3.7cm FlaK 37 anti-aircraft gun mounted on the rear cargo bed. Both the 3.7cm gun and the battlefield-modified truck has been authentically rendered with exquisite attention to detail. Besides, the magic track, a 3D-printing muzzel brake, photo-etched parts, metal width indicator poles and a bonus ammunition box are also offered for accurate details. The versatility of this vehicle, which can engage both air and ground targets, means it will fit well into a wide range of dioramas that modelers might create. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 SdKfz. 234/2 Puma à 8 roues
510006572€35.99
Article number: 510006572 Product: 1:35 Dt. SdKfz. 234/2 Puma 8-Rad The German armored car ‘Schwerer Panzerspähwagen Sd.Kfz. 234/2’ known as "Puma", was developed and produced by the German war machine in the closing years of WW2. The vehicle proved to be an excellent mix of mobility, protection and firepower which was built upon the operational experience gained by the Wehrmacht in the early stages of the conflict. From 1939 onwards the German army had used armored vehicles very effectively for advanced reconnaissance tasks, and also in a ground support role for its troops. The "Puma" was initially a reconnaissance vehicle, but due to its KwK 39 L / 60 50 mm gun it could also be used equally effectively in offensive actions against infantry and other armored vehicles. It was deployed in limited numbers on both the Eastern and Western fronts. The highly effective independent suspension system of the eight wheels and the powerful engine, enabled the Puma to reach speeds of up to 90 km/h on all types of battlefield terrain. Detailed plastic kit in scale 1:35
Maquettes chars
1:35 Semovente L 40 47/32
510006477€30.99
Référence article: 510006477 Produit: 1:35 Semovente L 40 47/32 L’engin automoteur L40 a été développé sur la base de la coque du char léger L6/40 afin de fournir aux formations rapides de l’Armée Royale un véhicule blindé capable de fournir l'appui d'artillerie nécessaire et d'être utilisé comme char d’assaut. Sur la base du projet du char L6/40, la tourelle rotative fut supprimée et le canon antichar 47/32 mod. 1935, similaire à celui utilisé sur les chars de la série « M », installé dans une casemate ouverte. L’engin automoteur se caractérisait par sa petite taille, son blindage par plaques et rivets typique de la production italienne, et un équipage de seulement deux hommes. Bien que conditionné par des performances ne permettant plus de contrer les véhicules blindés ennemis, il a été utilisé pendant la Seconde Guerre mondiale par l'Armée Royale en Libye, en Tunisie et lors de la campagne d'Italie. Après l'armistice, certains exemplaires ont été utilisés, en deuxième ligne, par la Wehrmacht et par les troupes terrestres de Luftwaffe.
Maquettes chars
1:35 Semovente M42 da 75/34
510006584€36.99
Numéro d’article: 510006584 Produit: 1:35 Semovente M42 da 75/34 Au cours des années précédant la Seconde Guerre mondiale, l'Armée royale a manifesté le besoin de disposer d'unités d'artillerie mécanisée en mesure de soutenir l'infanterie et les blindés. Le véhicule automoteur 75/18, qui a été développé sur la coque du char moyen «M», s'est avéré être le véhicule blindé italien le plus redouté par les alliés pendant le conflit. Grâce à son obusier de 75 mm installé dans la casemate, il s'est en effet avéré être une arme antichar efficace en mesure de détruire même les chars britanniques et américains les plus puissants et lourdement blindés. Toutefois, au cours de la guerre, le Regio Esercito demanda que soit développée une version de majeure capacité offensive. La coque du char automoteur M42 fut alors équipée du canon 75/34 conçu pour les tirs antichars. Les premiers exemplaires ont été distribués aux unités italiennes au printemps 1943. En raison de ses bonnes performances opérationnelles, le modèle a également été utilisé par les unités allemandes après l'armistice en septembre 1943.
Maquettes chars
1:35 Semovente M43 Basotto
510006751€39.99
Le canon automoteur M43 de 105/25, surnommé "Bassotto", a été développé par l'industrie italienne pour augmenter la capacité offensive des véhicules blindés et des canons automoteurs de l'armée royale italienne. Le M43 a été conçu sur un châssis modifié, élargi et abaissé, dérivé du char M15/42, et équipé d'un obusier Ansaldo de 105/25 monté en casemate. Sa protection, ainsi que le blindage avant, ont également été améliorés. Il est entré en service en 1943 en un nombre limité d'exemplaires et a participé aux opérations sur le front italien. On peut considérer ce véhicule blindé comme le plus puissant utilisé par l'Italie pendant la Seconde Guerre mondiale, efficace à la fois dans des actions offensives et défensives grâce à un bon compromis entre mobilité et armement. Après l'armistice de l'Italie, plusieurs exemplaires ont été capturés et utilisés avec succès par les troupes allemandes, qui l'ont rebaptisé "StuG M43 mit 105/25". Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Sgt. d'observateurs de chars, IV Exécution J (2 en 1)
540006852€95.99
Article number: 540006852 Product: 1:35 Pz.Beob.Wg,IV Ausf.J (2 in 1) Dragon's 1/35 Panzer IV tank series has the largest variety of models in the market and is widely recognized for its superior quality. It is highly regarded by military model enthusiasts. Among them, one model that stands out in terms of appearance is the Ausf.J Last Production, characterized by its mesh side skirts that gives it a unique look. Based on it, we have introduced the Premium Edition to further enhance the model. The Premium Edition includes not only the existing metal mesh side shirts and extensive photo-etched parts but also features a metal gun barrel, 3D-printed muzzle brake, cooper towing cable, upgraded road wheels, and, of course, the well-knwon Magic Track. This new version is a must-have collectible for military model enthusiasts.
Figurines militaires et accessoires
1:35 Sturmpionier (Eastern Front 1942)
540006146€18.99
Article number: 540006146 Product: 1:35 Sturmpionier (Eastern Front 1942) Dragon has chosen several sets featuring German soldiers from WWII. The exciting items feature German soldiers fighting in the Eastern Front in 1942. These figures exhibit a range of different uniforms and weapons suitable to their particular theater and time period, plus they are realistically posed and sharply molded. Thanks to this inspired collection of Dragon figure sets, modelers have all the ingredients they need to create a diorama from the Eastern front theater 80 years ago. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 Tiger Aces (Normandy 1944)
540006028€14.29
Article number: 540006028 Product: 1:35 Tiger Aces (Normandy 1944) We have planned the second wave of Normandy Defenders figure sets for reproduction. This time, we're including an additional six 1/35 scale German soldiers. Each figure accurately depicts the uniforms and equipment worn by the German army during that period. These figures can be used effectively in dioramas that portray the events of the Normandy campaign. Of particular note are the two sets of tank crew figures, which are the ideal complement to German tanks in Normandy.
Figurines militaires et accessoires
1:35 Tiger I Initial Prod.Pz.Abt.502 '43
540006252€95.99
Article number: 540006252 Product: 1:35 Tiger I Initial Prod.Pz.Abt.502 '43 The most shocking release in the past of our various Tiger I in the past was the debut of the Tiger I Initial production. The meticulous research and innovative engineering/design left a lasting impression on all 1/35 AFV modelers. To this day, its exceptional quality remains unrivaled. We are pleased to announce the re-release of these two Initial Tiger I tanks, packed with more features. The usual components such as the Magic Track, aluminum gun barrel, photo-etched parts are all included. As added features, the 2024 version has been upgraded with 3D-printed muzzle brakes and 3D-printed one-piece engine deck grills, copper cables, as well as metal smoke grenade racks with accompanying metal smoke grenades. Moreover, a set of bonus crew uniform is offered free. AFV Modelers can’t afford to miss out! Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 U.S. Army Airborne (Normandy 1944)
540006010€16.79
Article number: 540006010 Product: 1:35 U.S. Army Airborne (Normandy 1944) This year commemorates the 80th anniversary of the Allied Forces' invasion into continental Europe. As a complement to the recently announced reproduction of the Defenders (German soldiers), we are now introducing the attackers (Allied Forces). We are pleased to offer a collection of 1/35 figure sets representing the Allied Forces. These figures will allow modelers to recreate the scenarios, showcasing the Allied soldiers who saw combat in Normandy. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Figurines militaires et accessoires
1:35 U.S.1st Infantry Divis. Big Red One
540003015€16.79
Article number: 540003015 Product: 1:35 U.S.1st Infantry Divis. Big Red One We've chosen a number of items from our 1/35 World's Elite Forces series to produce. These kits showcase well-known elite forces from the USA, Britain, France, and Germany, and are designed to fit into conflicts that have occurred around the world. The poses are realistic and highly suited to the battlefield, and these unique subjects cannot be found anywhere else on the market. Detailed Plastic Kit
Figurines militaires et accessoires
1:35 US Army Support Weapon Teams
540006198€23.79
Article number: 540006198 Product: 1:35 US Army Support Weapon Teams This year commemorates the 80th anniversary of the Allied Forces' invasion into continental Europe. As a complement to the recently announced reproduction of the Defenders (German soldiers), we are now introducing the attackers (Allied Forces). We are pleased to offer a collection of 1/35 figure sets representing the Allied Forces. These figures will allow modelers to recreate the scenarios, showcasing the Allied soldiers who saw combat in Normandy. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 US M-7 Priest Howitzer Self-Prop
510006580€31.99
Article number: 510006580 Product: 1:35 US M-7 Priest Howitzer Self-Prop Model Dim.: 17,2 cm NEW GLUABLE RUBBER TRACKS - DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET CONTAINS 1 FIGURE The deployment of self-propelled artillery during the Second World War was very quickly adopted by all of the combatants. Following the innovative use of mobile artillery by the German army at the outset of the conflict, the need for artillery pieces to be as mobile as tank battalions was universally recognised. The Allies initially mounted their first self-propelled artillery units on half-track vehicles, but the most effective solution manifested itself with the introduction of the M7 Priest. Using the hull of the M3 Lee medium tank the M7 was armed with a 105mm M2A1 howitzer. It was deployed operationally for the first time in 1942 by British troops who gave it the nickname "Priest", due to the position of the machine gun in the front of the vehicle which resembled a Church pulpit. Robust and reliable, it had a plentiful supply of ammunition and provided effective indirect support fire. It was used by both the American army and the U.S. Marines on all fronts throughout the course of the war. Detailed plastic kit
Maquettes chars
1:35 US M8 Greyhound
510006364€25.99
Référence article: 510006364 Produit: 1:35 US M8 Greyhound Au début de la Seconde Guerre mondiale, l'armée américaine disposait de « scout cars » légers et peu armés pour les activités de reconnaissance avancée. Développé au cours de la guerre, le véhicule blindé M-8 Greyhoud, qui offrait une meilleure protection et un armement plus lourd, a représenté un tournant pour l'armée américaine. Le véhicule offre une plus grande flexibilité opérationnelle et peut être utilisé plus efficacement pour soutenir les troupes au sol grâce au canon de 37 mm installé dans la tourelle. D'abord utilisé sur le front italien, de Montecassino à Anzio, il a ensuite participé aux opérations du jour J en juin 1944. Bien que le terrain de Normandie se soit révélé difficile et exigeant au début de l'opération, le M-8 a ensuite été apprécié pour sa rapidité de déplacement et sa polyvalence d'utilisation. Il a été utilisé non seulement par l'armée américaine, mais aussi par de nombreux pays alliés. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 US Sherman M4A3 Wet
510096440€28.49
Le char moyen M4 Sherman a été sans aucun doute le blindé le plus répandu et le plus utilisé durant la Seconde Guerre mondiale. Le M4 a constitué l’épine dorsale des forces blindées américaines et a été produit en de nombreuses versions et variantes. Le Sherman "Wet" a été développé au cours de la vie opérationnelle du char afin de réduire le risque d'incendie en combat, un problème fréquent sur les premières versions produites. Introduit en 1944, il utilisait des réservoirs de carburant positionnés et conçus pour minimiser les risques d’explosion et d’incendie. La solution des réservoirs immergés dans une solution de propylène glycol, d'où le nom "Wet", s’est révélée efficace, et les équipages ont apprécié l’amélioration de la fiabilité et des capacités de survie en combat. Il a été largement utilisé sur le front européen lors des phases finales du conflit. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 Véhicule amphibie DUKW
510006392€32.99
Référence article: 510006392 Produit: 1:35 DUKW Amphibious vehicle C’est à partir du camion de transport tactique américain General Motor CCKW-353 de 2½ tonnes 6x6 qu’une version amphibie spéciale a été conçue et construite pour répondre aux besoins logistiques des équipes de débarquement de l'armée américaine afin de transférer les marchandises directement et rapidement des navires à la plage. Les composants de base étaient en effet les mêmes que ceux du camion routier GMC avec son moteur 6 cylindres de 4 400 cm3 et ses trois différentiels à six roues motrices. Le DUKW se caractérisait par sa coque soudée, pour la rendre amphibie, renforcée par des nervures horizontales. Sa force résidait dans son extraordinaire polyvalence et sa capacité de charge. En effet, il pouvait transporter 2 400 kg de charge utile soit 25 hommes entièrement équipés. Les DUKW ont été largement utilisés sur tous les théâtres de guerre par l'armée américaine, les Marines et les forces armées de nombreux pays alliés. Ils ont contribué efficacement aux débarquements de Salerne et d'Anzio, en Normandie lors du jour J, à Utah et à Omaha, ainsi que sur les plages du Pacifique.
Maquettes chars
1:35 Véhicule de combat
510000320€12.49
Article number: 510000320 Product: 1/35 Gefechtswagen Model Dim.: 9,5 cm 1 FIGURE INCLUDED Much work was carried out in the USA and Britain to design special airborne vehicles to drop behind the enemy lines. Willys MB-Jeeps engaged in helping the Infantry by clearing snipers and other commando tasks. Generally manned by a sergeant and a trooper this vehicle was modified in many respects. It was armed with no fewer than five machine guns and had additional tanks for 135 l. of fuel.
Maquettes chars
1:35 Véhicule de récupération M32
510006547€29.99
Article number: 510006547 Product: 1:35 M32 Recovery Vehicle Model Dim.: 16,7 cm NEW GLUABLE TRACKS The Armored Recovery Vehicles (ARV), were introduced during the Second World War. They were built on the hulls of existing armored vehicles, removing the main armament and the turret and installing of specific equipment for the recovery or repair of armoured fighting vehicles damaged in battle. The American M-32 ARV was based on the chassis of the well-known Sherman A-4 medium tank and it was used by U.S. Army in the European Theater of Operations during the Second World War. It was characterized by the superstructure that permitted to lift and to trail the damaged tanks. Furthermore on M-32 a wide set of repairing tools and spare parts were loaded on board emphasizing its role of real "mobile armoured workshop" capable of operating on the front line. The M-32 was even able to perform complex operation as the replacing of the tank engine. The M-32, after the end of WWII, served in the U.S. Army during the Korean War and it was used by many Countries until the ‘90s. Detailed Plastic Kit of model M32 Recovery Vehicle in scale 1:35
Maquettes bateaux militaires
1:35 Vosper 72''6' MTB 77
510005610€114.99
Article number: 510005610 Product: 1:35 Vosper 72''6' MTB 77 Model Dim.: 63,1 cm 100% NEW MOULDS - Decals for 3 versions Vosper company became famous, during the Second World War, for the production of small and fast Motor Torpedo Boats (MTB) and Motor Gun Boats (MGB) for the Royal Navy. Among the various boats in production, the Vosper MTB 72’6" were characterized by a significant life cycle with different mission profiles as the coastal patrol and the anti-submarine support in the North Sea and English Channel. Moves from 3 engines with and impressive power of 4,200 hp, Vosper MTB was able to reach a speed close to 40 knots (70 km/h). The first versions were introduced at the beginning of the war but were gradually introduced new variants, type I and type II, which were characterized by a different combination of offensive and defensive weaponry. They were usually armed with 457 mm torpedo tubes., depth charges, and 0.303" Vickers machine guns or, more rarely, from 0.5" Vickers machine guns , for air defence. The crew consisted of 10 to 13 men.
Figurines militaires et accessoires
1:35 WWII Fig.-Set Dt.Kampfgr.v. Luck(4)
540006155€18.99
Article number: 540006155 Product: 1:35 WWII Fig.-Set Dt.Kampfgr.v. Luck(4) The Normandy invasion marked the beginning of the Allied Forces' counterattack on continental Europe. This year commemorates the 80th anniversary of this monumental seaborne landing, the largest in human history. Dragon have released a wide range of 1/35 figure sets depicting the intense battles that took place in Normandy in 1944. As the first phase of a series of figure set reproductions this year, we have carefully selected some sets focusing on the defensive side. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35 WWII Véhicule tout-terrain américain
510000314€15.99
Article number: 510000314 Product: 1/35 WWII US Off-Road Support Vehicle Model Dim.: 14 cm Decals for one version. In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multi-purpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of 1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II.
Maquettes bateaux militaires
1:350 Destroyer USS Benson DD-421, 1945
540001032€61.29
Article number: 540001032 Product: 1:350 Destroyer USS Benson DD-421, 1945 We are excited to announce the production of the 1/350 U.S.S. Destroyer Collection Part II. Previously, we produced three U.S.S. Destroyers (1021, 1026, and 1029) from different classes, and they sold out quickly due to high demand. As a result, some of you were unable to get the desired quantities. Now, here is an opportunity to obtain the 1/350 scale U.S.S. Destroyers once more. These three other World War II U.S.S. Destroyers, representing three different classes, will set sail soon. Don't miss out on this chance again. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes chars
1:35Tiger I L.Pr.w/Zim.Villers-Bocage'44
540006947€99.99
Article number: 540006947 Product: 1:35Tiger I L.Pr.w/Zim.Villers-Bocage'44 Michael Wittmann was one of the most famous tank commanders of World War II, destroying over 150 enemy tanks and 130 other armored vehicles during his combat career. In the battle in Normandy, Wittmann was associated with two iconic Tiger I tanks that played a pivotal role in his exploits. The first was Tiger I late production "212", which he employed to devastating effect in the Battle of Villers-Bocage against British and Canadian forces in Normandy. Wittmann's final mount was Tiger I No. 007, the site of his dramatic last stand near the town of St.Aignan de Cramesnil, where his career came to an end on August 8, 1944 when his Tiger was destroyed. Eighty years after his death, these three famous Tigers remain central to Wittmann's legacy as one of history's greatest tank aces. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes hélicoptères militaires
1:48 À PARTIR DE 212 /UH 1N
510002692€25.99
Référence article: 510002692 Article: 1:48 AB 212 /UH 1N Taille du modèle: 36 cm Le UH-1N fut développé par la firme américaine Bell Helicopter à la fin des an-nées 1960. En Italie, une version similaire fut produite par Agusta Westland sous la désignation AB-212. Le AB-212 est un hélicoptère moyen à rotor principal bi-pale équipé de deux turbopropulseurs Pratt & Whitney PT6T délivrant 1.342kW. C’est une évolution du Model 205, la différence principale étant le fuselage ral-longé. Dans la première moitié des années 2000, le AB-212 fut considérablement amélioré pour accroître ses capacités opérationnelles. Il a été équipé de deux mitrailleuses de 7,62mm de sabord et les équipements défensifs ont été accrus avec des lance-leurres anti-missiles et des blindages en matériaux céramiques et Kevlar pour protéger l’équipage. Des AB-212 italiens ainsi modifiés sont utilisés en Afghanistan depuis 2006, au sein de Force Internationale d’Assistance et de Sécurité.
Maquettes avions militaires
1:48 A-4E/F/G Skyhawk
510002826€35.99
Le Douglas A-4 Skyhawk a été développé dans les années 1950 et a été l'un des avions d'attaque légers les plus célèbres et les plus populaires de l'histoire de l'aviation. Sa petite taille et sa compacité le rendaient extrêmement maniable et idéal pour une utilisation sur les porte-avions. Il présentait une conception simple, avec ses ailes basses en forme de delta caractéristiques et ses petites prises d'air latérales, mais extrêmement fonctionnelle pour les utilisations opérationnelles. Avec l'adoption du moteur turboréacteur J52 de Pratt & Whitney, le Skyhawk pouvait atteindre 1 170 km/h. Armé de deux canons de 20 mm, il pouvait transporter une charge offensive létale composée de missiles air-air, de missiles air-surface, de roquettes et de bombes à chute libre. Grâce à ses caractéristiques opérationnelles, l'A-4 a connu un succès commercial considérable. Outre les États-Unis, il a été employé par l'Australie, la Nouvelle-Zélande, le Koweït et Israël, entre autres.
Maquettes avions militaires
1:48 A-7 E Corsair II
510002797€39.99
Article number: 510002797 Product: 1:48 A-7E Corsair II Model Dim.: 29,0 cm From ESCI moulds SUPER DECALS SHEET The LTV A-7 Corsair II was designed and implemented in the first half of the 1960s to satisfy the specific United States Navy request to have a new carrier-capable light attack aircraft able to replace the Douglas A-4 Skyhawk and the piston-powered Douglas A-1 Skyraider. It was directly developed by the fighter Vought F-8 Crusade airframe. The A-7 was characterized by the large frontal air intake under the cabin, by the 35° foldable swept wing to optimize the use and the storage on the aircraft carriers flight decks and by the adoption of a modern Head-up-Display to enhance the operational effectiveness. Thanks to its underwing hardpoints the A-7 was able to carry an impressive offensive load based on conventional bombs, guided bombs as the Paveway and air-to-surface missiles. The A-7E was the last version produced for the U.S Navy with an improved operational capability and the possibility to use the Harpoon anti-ship missiles and the AGM-88 HARM anti-radiation missiles. Detailed plastic kit
Maquettes hélicoptères militaires
1:48 Chinook HC.1 / CH-47D
510002779€57.99
Article number: 510002779 Product: 1:48 Chinook HC.1 / CH-47D Model Dim.: 34,0 cm SUPER DECALS SHEET COLORED INSTRUCTION SHEET UPGRADED MOULD The Boeing CH-47 Chinook is one of the most famous heavy-lift helicopters in Military Aviation History. Characteristic for its two engine tandem rotor configuration, one over the cabin and one in the tail section. It was specifically developed to meet the U.S. Army’s transportation needs and to replace the obsolete H-21. The CH-47 Chinook has been produced in several versions and it has been adopted by a lot of Countries all over the World. The British Royal Air Force has the largest Chinook fleet outside U.S.A. The Chinook has
Maquettes avions militaires
1:48 EA-18G Growler
510002824€43.99
Le Boeing E/A-18 G Growler est né pour répondre à un besoin spécifique de la U.S. Navy : disposer d'un avion spécialisé dans la guerre électronique pour remplacer le Grumman EA-6B Prowler obsolète, tant en termes d'avionique que de performances. Le Growler est directement dérivé de l'avion de chasse biplace F/A-18 F Super Hornet, dont il conserve pratiquement toutes les caractéristiques aérodynamiques. Les deux moteurs General Electric confèrent au Growler une vitesse maximale de Mach 1,8 et des performances en rapport avec les avions qu'il doit soutenir. L'équipage se compose du pilote et, en tandem, du WSO (Weapon System Officer). Contrairement au F/A-18, il n'est pas équipé d'un canon mais peut transporter des pods de brouillage radar et de guerre électronique, des réservoirs supplémentaires, des distributeurs de paillettes et de fusées éclairantes, ainsi que des missiles AIM-120 AMRAAM dans ses pylônes sous les ailes. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes avions militaires
1:48 F-16A Fighting Falcon
510002786€35.99
Article number: 510002786 Product: 1:48 F-16A Fighting Falcon Model Dim.: 31,5 cm SUPER DECALS SHEET FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET The F-16 Fighting Falcon, produced by the American company General Dynamics since the late '70s, is a real icon of the military aviation history. It was originally developed, according the United States Air Force need, to provide a modern and effective single-seat air superiority day fighter. However the project has progressively evolved and created an all-weather multirole aircraft able to have an extraordinary operational flexibility The F-16 is characterized by an original design easily recognizable by the frameless bubble canopy, which guarantees great visibility to the pilot. The F-16 adopted innovative solutions such as the side-mounted control stick, the "fly-by-wire" control system and modern avionics to enhance flight and combat performances. Appreciated by the pilots for its great manoeuvrability and reliability, the "Fighting Falcon" is armed with a 20mm M61 Vulcan internal cannon. Thanks to its hard points and location, it can mount a huge range of offensive weapons as missiles and bombs. The F-16 has been adopted by a lot of air forces around the World and used, often with great effectiveness, in several operational theatres. Detailed Plastic Kit of model F-4J Phantom IIF-16A Fighting Falcon in scale 1:48
Maquettes avions militaires
1:48 F-16C Fighting Falcon War Thunder
510035105€39.49
Le F-16 Fighting Falcon, produit par la société américaine General Dynamics à partir de la fin des années 70, est une véritable icône de l’aviation militaire. Au début, développé pour répondre aux besoins de l’U.S. Air Force d’avoir un avion de chasse monoplace diurne de supériorité aérienne, le projet a progressivement évolué et un avion de combat multi-rôle tous-temps a été créé, caractérisé par une flexibilité opérationnelle extraordinaire. Le F-16 se caractérise par un design original, facilement reconnaissable par le « canopy » (verrière) à bulle. qui garantit une grande visibilité au pilote. De plus, le F-16 adopta des solutions innovantes telles que la cloche latérale, le « fly-by-wire » et de modernes systèmes avioniques pour le vol et le combat. Apprécié par les pilotes pour sa grande manœuvrabilité et fiabilité, il est armé d’un canon M61 Vulcan de 20mm. Grâce à ses nombreux points d’attaque, il peut utiliser un arsenal offensif varié de missiles et de bombes. Le F-16 a été employé par de nombreuses forces aériennes du monde entier et il a effectué, souvent avec une grande efficacité, un nombre important de missions opérationnelles.
Maquettes avions militaires
1:48 F-35B Lightning II
510002810€76.99
Le programme JSF Joint Strike Fighter a été lancé pour développer un nouveau chasseur multirôle « tous temps » de cinquième génération, capable de remplacer efficacement les avions d’attaque au sol actuellement en service aux États-Unis et dans les pays de l’OTAN. De ce projet est né le monoplace Lockheed Martin F-35 Lightning II. Doté d’une technologie extraordinaire, il se caractérise par une conception aérodynamique à aile trapézoïdale avec des caractéristiques furtives (stealth). Conçu pour exécuter des missions de supériorité aérienne, d’appui aérien rapproché et d’attaque au sol, sa cellule peut être adaptée à différentes configurations. Le F-35B, grâce à ses capacités STOVL (décollage et atterrissage courts ou verticaux), a été conçu pour opérer à partir de porte-avions tels que le Queen Elizabeth de la Royal Navy ou le Cavour de la Marine Militaire Italienne. Également utilisé par le Corps des Marines, il se distingue par l’adoption du moteur Pratt & Whitney équipé d’un postcombusteur et d’une tuyère orientable vers le bas. L’extrême flexibilité opérationnelle, la capacité d’emport offensif, la technologie embarquée et l’innovation majeure du projet feront du F-35 Lightning II un acteur incontournable de l’aviation militaire du XXIe siècle.
Maquettes avions militaires
1:48 F-4E Phantom II
510002770€37.99
Article number: 510002770 Product: 1:48 F-4E Phantom II Model Dim.: 40,0 cm SUPER DECALS SHEET FOR 4 VERSIONS Developed by the American aircraft company McDonnell Douglas the F-4 Phantom II is a tandem two-seat, all-weather, supersonic fighter-bomber. It entered service during the sixties and it is one of the most famous airplanes of the military aviation history. In the original project, it was specifically designed for U.S. Navy but it has been used by all U.S. forces and it obtained a significant commercial success around the World. The F-4E version, specifically developed for the U.S. Air Force, adopted a M61 Vulcan cannon in the nose and it could be armed, to perform air-superiority missions, with AIM-9 Sidewinder and AIM-9 Sparrow airto-air missiles. Thanks to its two General Electric J-79 powerful jet-engines, the F-4E was able to reach the top speed of 1,240 Knots. Speed, thrust and reliability were the Phantom II strengths able to successfully counterbalance the reduced maneuverability due to its big dimensions. Detailed Plastic Kit of model F-4E Phantom II in scale 1:48
Maquettes avions militaires
1:48 F/A-18F U.S. Navy couleurs spéciales
510002823€44.99
Article number: 510002823 Product: 1:48 F/A-18F U.S. Navy Special Colors The Boeing F/A-18E Super Hornet is a modern twin-engine, carrier-capable, single-seat fighter directly derived from the original design of the McDonnell Douglas F/A-18 Hornet. Larger and heavier than its predecessor, it is characterized by significantly improved flight and combat performance. Noticeable evolutionary design changes can best be seen in the revised wing-shape which is able to ensure maximum performance, particularly in terms of maneuverability. Additional design improvements can also be seen in the newer intake ramps for the engines, and also in the enhanced tail design. The aircraft originally entered service with the United States Navy in the early 2000’s to replace the F-14 Tomcat, with the primary role of fleet air defense.
Maquettes avions militaires
1:48 G.91 R1/R3 Gina
510092645€36.99
Le chasseur-bombardier monoplace Fiat G-91 a été développé par l'entreprise aéronautique italienne au début des années 1950. Conçu par le célèbre ingénieur Giuseppe Gabrielli, il se distinguait par une configuration aérodynamique avec une aile en flèche et des dimensions compactes qui garantissaient une grande manœuvrabilité en vol. Ses bonnes performances ont permis au G-91 de remporter le concours organisé par l'OTAN pour identifier un avion de soutien tactique facile à produire tout en étant polyvalent et flexible, capable d'équiper les escadrons des pays membres. Le Fiat G-91 a ainsi été utilisé par l'Aéronautique Militaire Italienne, ainsi que par l'Allemagne et le Portugal. Armé, dans sa version "R", de quatre mitrailleuses de 12,7 mm installées dans le nez, il pouvait transporter une charge offensive de 700 kg sur ses points d'emport sous les ailes. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes hélicoptères militaires
1:48 Hélicoptère OH-13 Scout Guerre de Corée
510002820€24.99
Article number: 510002820 Product: 1:48 OH-13 Scout Helicopter Korea War The American Bell H-13 is one of the most iconic helicopters in aviation history. Developed immediately after the Second World War, it was distributed to the U.S. Army in the late 1940s. The "Sioux" was characterized by its distinctive "soap bubble canopy" which made it unique and easily recognizable along with the tail trellis and its two side tanks. The OH-13 was deployed in large numbers during the Korean War to carry out a wide variety of tasks including observation, advanced reconnaissance, and medical evacuation. The OH-13 had a three-seater cabin configuration and could reach a top speed of170 km / h. It was both robust and exceptionally reliable which contributed to its operational longevity. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35
Maquettes avions militaires
1:48 Hercules C-130J C5
510002746€79.99
Article number: 510002746 Product: 1:48 Hercules C-130J C5 Model Dim.: 62,1 cm SUPER DECALS SHEET FOR 4 VERSIONS While it maintains the familiar lines of the Hercules, a common sight in the world’s skies for decades now, the C-130J has been extensively re-designed. The most visible change lies in the use of two 4700 HP Rolls-Royce (Allison) AE2100D3 engines, with six-blade composite-material propellers that ensure silent running and low fuel consumption. High performance features include an excellent rate of climb and an extended range of action thanks to the new engines. An equally important development is the avionics: the cockpit, in fact, is equipped with new digital instruments and a Head-Up Display that provides the pilot with a constant stream of data without him having to look away from the cockpit window. The C-130J is steadily becoming the standard transport aircraft in many NATO countries, Italy included.
Maquettes avions militaires
1:48 Ho229A-1 Flying Wing
540005505€50.99
The Horten Ho 229 was a revolutionary German fighter-bomber design from the final years of World War II and was one of the first jet-powered flying wing aircraft ever built. This sleek, futuristic aircraft held great promise as a high-speed interceptor capable of reaching over 600 mph. The Ho 229 demonstrated impressive performance during test flights, with its flying wing configuration and use of wooden construction as innovative solutions to reduce radar detection. Historians believe the Ho 229 could have become a formidable wonder weapon had the Nazis been able to invest more resources into its development. However, for modelers, this iconic aircraft is now available in 1/48 scale, with not just one but two highly detailed kit versions to choose from. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes avions militaires
1:48 Ho229B Nachtjäger
540005511€50.99
The Horten Ho 229 was a revolutionary German fighter-bomber design from the final years of World War II and was one of the first jet-powered flying wing aircraft ever built. This sleek, futuristic aircraft held great promise as a high-speed interceptor capable of reaching over 600 mph. The Ho 229 demonstrated impressive performance during test flights, with its flying wing configuration and use of wooden construction as innovative solutions to reduce radar detection. Historians believe the Ho 229 could have become a formidable wonder weapon had the Nazis been able to invest more resources into its development. However, for modelers, this iconic aircraft is now available in 1/48 scale, with not just one but two highly detailed kit versions to choose from. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes avions militaires
1:48 Hurricane Mk 1 Aces
510002838€33.49
Le Hawker Hurricane a été le chasseur le plus répandu et utilisé par la Royal Air Force britannique au début de la Seconde Guerre mondiale. L’Hurricane était propulsé par un moteur Rolls-Royce Merlin, un 12 cylindres en ligne refroidi par liquide, développant plus de 1 000 HP, lui permettant d’atteindre une vitesse supérieure à 500 km/h. Son armement, composé de huit mitrailleuses Browning de 7,7 mm, lui conférait une bonne puissance de feu. Bien que plus lent et d’une conception aérodynamique plus obsolète que son célèbre « compagnon » de combat, le Supermarine Spitfire, avec lequel il a partagé l’effort opérationnel lors de la bataille d’Angleterre, il était néanmoins plus robuste, plus économique et plus facile à entretenir et à réparer. Il offrait également une maniabilité plus accessible, réduisant ainsi le temps de formation des pilotes, ce qui a joué un rôle déterminant dans la victoire de la bataille d’Angleterre. Des as célèbres de la RAF, tels que D.Bader, M.Robinson et R. Stanford Tuck, ont volé à bord du Hurricane. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes hélicoptères militaires
1:48 IT V-22 OSPREY Tilt Rotor
510002622€39.99
Référence article: 510002622 Article: 1:48 IT V-22 OSPREY Tilt Rotor Taille du modèle: 28,9 cm Le convertiplane V-22 Osprey est entre en service dans des unites d' elvaluation der I'US Navy et des Marines pour definir les procedures de pilotage et d'utilisation de ce nouvel engin revolutionnaire. Grace á ses grands rotors basculants, le Osprey est capable decoller et atterrir comme un hélicoptére. Une fois en l'aair, grace au pivotement de ses moteurs, il vole comme un avion conventionnel, attignant des vitesses et un rayon d#action impensables pour un hélicoptère traditionnel. Le V-22 doit remplacer les vieux hélicoptères CH-46 dans les unités de transport et d'assaut des Marines. Il sera également utilisè par les forces spéciales.
Maquettes avions militaires
1:48 JAS 39 A GRIPEN
510002638€28.99
Article number: 510002638 Product: 1/48 JAS 39 A GRIPEN Model Dim.: 30 cm Decals for 2 versions The Gripen is the standard fighter-bomber of the modern-day Swedish Air Force, where it came into service just a few years ago. Extremely manoeuvrable and compact, its sophisticated electronics provide it with all-weather, night-time flight capabilities. The aircraft can be fitted with an array of the latest air-air and air-surface weapons.
Maquettes avions militaires
1:48 JAS-39D GRIPEN TWIN SEATER
510002664€26.79
Le Saab JAS 39 Gripen est entré en service dans la seconde moitié des années 1990, marquant une nette amélioration par rapport à ses prédécesseurs comme le longuement utilisé chasseur Saab 37 Viggen. Ce chasseur suédois destiné à la supériorité aérienne et aux missions de combat a rapidement été décliné en version biplace pour répondre aux besoins de formation avancée des pilotes. Il a conservé essentiellement les mêmes excellentes performances que le modèle monoplace, tout en offrant une flexibilité opérationnelle accrue, lui permettant d’accomplir également des missions de reconnaissance et d’attaque au sol. Son design aérodynamique intéressant, garantissant une grande maniabilité, ses excellentes performances de vol, une vitesse maximale de Mach 2.0 et la capacité de transporter une charge offensive flexible et diversifiée, en ont fait un succès commercial au-delà des frontières suédoises. Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes avions militaires
1:48 Ju 87 B-2/R-2 Stuka "Picchiatello
510002769€41.99
Article number: 510002769 Product: 1:48 Ju 87 B-2/R-2 Stuka "Picchiatello" Model Dim.: 22,9 cm SUPER DECALS SHEET, PHOTO ETCHED PARTS AND COLORED INSTRUCTION SHEET INCLUDED The JU-87 dive bomber is certainly one of the most famous airplanes of World War II. This characteristic "inverted gull wing" aircraft became famous at the early stage of the war and it can be considered, together with the Wehrmacht Panzer Division, the symbol of the "Blitzkrieg". The Italian Regia Aeronautica requested to the German ally, before the beginning of the war, a specific supply of one hundred "Stuka" to equip its ground attack and dive bombing Squadrons. The first Ju-87B units arrived in the summer of 1940 and went to equip the 96º Gruppo Bombardamento a Tuffo. The Ju-87, either in the B2 version or in the extender range R2 version, equipped other "Gruppi di Volo" for a total of 150 planes. The Italian "Stuka", nicknamed "Picchiatello", was used by Regia Aeronautica over Malta, in North Africa, in the Balkans and in the Mediterranean Theatre. Detailed Plastic Kit of model Ju 87 B-2/R-2 Stuka "Picchiatello" Regia Aeronautica in scale 1:48
Maquettes avions militaires
1:48 Junker Ju-87G-1 Stuka oiseau-canon
510002830€37.99
Référence article: 510002830 Produit: 1:48 Junker Ju-87G-1 Stuka Kanonenvogel Le bombardier en piqué JU-87 est sûrement l’un des avions les plus connus et célèbres de la seconde guerre mondiale. Cette caractéristique de l’avion à aile en forme de « mouette » acquit une grande notoriété au début de la guerre et fut considérée, avec les Divisions Panzer de la Wehrmacht, symbole de la Blitzkrieg. Au cours de la guerre, de nouvelles versions avec des profils opérationnels différents ont été introduites. Le Ju-87G a été développé comme une version « antichar » du célèbre Stuka pour combattre un nombre impressionnant de véhicules blindés ennemis sur le front oriental après 1943. Le célèbre pilote de Stuka Hans Ulrich Rudel a suggéré d’appliquer deux canons Flak 18 de 37 mm logés dans des pods sous les ailes pour mieux contrer cette nouvelle menace. Dans cette configuration, le Ju-87G « Kanonenvogel » s'est avéré extrêmement efficace aux mains de pilotes expérimentés.
Maquettes avions militaires
1:48 Junkers JU-87B Stuka Bat.o.Brit.
510002807€39.99
Article number: 510002807 Product: 1:48 Junkers JU-87B Stuka Bat.o.Brit. Model Dim.: 22,9 cm "Battle of Britain 80th Anniversary" Super Decals Sheet The Junkers Ju 87 Stuka was a two-seat dive-bomber/ground-attack aircraft. It first flew in 1935 and made its combat debut in 1936 as part of the Condor Legion during the Spanish Civil War. The aircraft was easily recognizable by its inverted gull wings and fixed landing gear. The Stuka's design included several innovative features including automatic pull-up dive brakes set under both wings to ensure that the plane recovered from its attack dive, even if the pilot blacked out from the acceleration. It soon became the iconic aircraft of the German ‘Blitzkrieg’ during the first stages of the Second World War, where it provided close air support to the Wehrmacht Panzer Divisions. It was also used by the Luftwaffe during the Battle of Britain, where it’s weaknesses became apparent in comparison to the faster and better armed, more modern fighters, such as the Hurricane and Spitfire. Detailed plastic kit
Maquettes avions militaires
1:48 Macchi MC. 200 Série XXI-XXIII
510002767€35.99
Référence article: 510002767 Produit: 1:48 Macchi MC. 200 Series XXI-XXIII Conçu par le célèbre ingénieur Mario Castoldi, le Macchi MC200 marquait une évolution radicale des avions de chasse italiens. Comparé aux biplans Fiat CR32 et CR42 qui équipaient en majorité les escadrons de chasse de la force aérienne italienne (Regia Aeronautica) au début de la 2ème G.M., le Macchi MC200 se distinguait, comme le Fiat G50 de l’époque, par sa configuration monoplan et sa structure entièrement métallique. Le moteur 14 cylindres en double étoile Fiat A.74 RC 38 développant 840cv lui permettait d’atteindre 500km/h. Comparé aux chasseurs alliés, il était sous-motorisé et sa puissance de feu insuffisante. Les deux mitrailleuses de capot Breda-SAFAT de 12,7mm constituaient le seul armement interne. Sur les dernières versions produites, deux mitrailleuses supplémentaires - des Breda-SAFAT de 7,7mm, étaient montées dans les ailes. Le MC200 fut utilisé par la Regia Aeronautica sur divers fronts de la 2ème G.M., en Afrique, en Méditerranée, dans les Balkans et en Russie.