Nouveautés

Camions RC et trucks RC
1:14 3-axle Material trailer
500907740€699.99
500907740 1:14 3-axle Material trailer Optionales Accessories: - 500907071 1:14 Carson SemiTrailer LightUnit 7section (MFC) - 500907651 1:14 Steel Trailer palette case w. Paletts (6) - 500907646 1:14 Trailer Splash guard - 500907155 1:14 Alum. Trailer Coupling SAF (MFC) - 500907159 1:14 Alum. Front wheel wide/round h. (2) - 500907387* 1:14 7,2V LED-PCB 7-Section taillight - 500907381* 1:14 7,2/14V PCB License plate illumination *Not compatible with TAMIYA MFC-03/01

Accessoires supplémentaire
1:14 Conv. Box Body for Tractor Vol.FH16
500907732€399.99
500907732 1:14 Conversion Kit Box Body for Tractor Volvo FH16 Timber Truck With this conversion kit, you can convert the TAMIYA® Volvo FH16 timber transporter into an articulated truck with a box body. The conversion kit consists of an aluminum frame with plastic side panels. A steel subframe is included for mounting on the chassis. The loading doors are suspended on aluminum hinges with a 270° opening angle. Strong magnets ensure locking. A matching box trailer is available as an option under 500907731. Optional accessories: - 500907515 1:14 Volvo Underride guard w/Tailight mount - 500907182 1:14 Trailer hitch with Pole RC/Mech. Model kit, 1:14 scale, box body conversion kit, steel subframe, manual. Suitable for the TAMIYA Volvo FH16 timber truck 300056360.

Accessoires élémentaire
1:14 2-Axle Boxed Trailer
500907731€589.99
500907731 1:14 2-Axle Boxed Trailer The 2-axle box trailer reflects its attractive craftsmanship and appearance, both in the original and in the model, making it a distinctive companion on real roads and, in the model, on the track. Combined with the TAMIYA Volvo FH16 timber transporter and the box body conversion kit (500907732), this articulated truck becomes a workhorse and is in no way inferior to the original. The solid sheet steel frame allows a payload of approximately 5,000g. To further enhance the 2-axle box trailer, an optional accessory kit (item no. 500907623, including a spare wheel and bracket, two compressed air tanks, and a tie-down kit) is available. For use on the TAMIYA Volvo FH16 tractor unit, the CARSON drawbar (item no. 500907182) is required; it is mounted on the existing frame end cross member. Optional Accessories: - 500907623 1:14 accessory set for 2-axle trailer - 500907159 1:14 Alum. Front wheel wide/round h. (2) - 500907387* 1:14 7,2V LED-PCB 7-Section taillight - 500907381* 1:14 7,2/14V PCB License plate illumination *Not compatible with TAMIYA MFC-03/01 Model kit, 1:14 scale, box body, 2 axles, ball bearings, aluminum bumper, underride protection, tires, wheels, manual.

Maquettes chars
1:35 M1A1 Abrams War Thunder
510035108€37.99
Le char d’assaut de troisième génération M1 Abrams constitue l'épine dorsale des divisions blindées de l'armée Américaine et du Corps des Marines. L'Abrams se caractérise par son blindage lourd (il compte parmi les véhicules de combat les plus lourds au monde) et l'adoption du puissant moteur à turbine multi-carburant. Une grande attention a été portée à la protection de l'équipage grâce au dépôt de munitions séparé et fortement protégé. Le M1 Abrams, qui est entré en service opérationnel au début des années 80 pour remplacer les anciens M-60, offre un système sophistiqué de conduite de tir et un blindage moderne. D'abord armé d'un canon de 105 mm, il a ensuite été équipé du canon de 120 mm le plus moderne et le plus puissant avec un tube lisse capable d'utiliser une variété différente de projectiles. L'Abrams a été largement utilisé, avec une efficacité létale, sur tous les grands théâtres opérationnels, du Moyen-Orient à l'Afghanistan, s'avérant être supérieur à tout autre char adverse. Attention ! Ne convient pas aux enfants de moins de 14 ans.

Figurines militaires et accessoires
1:35 German Tank Hunters
540006034€16.79
Article number: 540006034 Product: 1:35 German Tank Hunters After the successful Allied invasion of Normandy in June 1944, the Allied forces moved to liberate the rest of occupied Western Europe. Over the following months, they fought a series of bloody battles to push the Germans back. The Allies faced fierce German resistance and got some setbacks before crossing the Rhine and advancing into Germany. To represent the soldiers involved in these battles, we have selected the following symbolic figure sets for a reproduction. Don’t miss out! Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes bateaux militaires
1:700 U.S.S. Albany CG-10 (Smart Kit)
540007097€43.49
Article number: 540007097 Product: 1:700 U.S.S. Albany CG-10 (Smart Kit) We have selected three Cold War-era USS warships, namely Virginia CGN-38, Albany CG-10, and Long Beach CGN-9 from 1980, for production in 1/700 scale. These models have been unavailable in the market for quite some time, and ship modelers are expected to be highly enthusiastic about obtaining them after all these years. These models showcase the intricate details of three distinct classes of warships. Additionally, photo-etched parts are included to enhance the level of detail even further. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes avions militaires
1:72 Me1101
540005013€31.49
Article number: 540005013 Product: 1:72 Me1101 Dragon's Golden Wings series showcases 1/72 scale aircraft from World War II. This series includes several unique and highly sought-after models that have been unavailable for several years. Recognizing the demand from aviation modelers, we have carefully selected a few of these aircraft for production to meet modelers' needs. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes chars
1:35 Sd.Kfz.2 kl. Kettenkrad w/Püppchen
540006114€35.99
Article number: 540006114 Product: 1:35 Sd.Kfz.2 kl. Kettenkrad m. Püppchen We have carefully selected a range of artillery items from the US and German Army during World War II for a limited reproduction. These items have been meticulously engineered to ensure accurate details. One exceptional feature of these items is the inclusion of figure(s). Modelers will be delighted to find that they can create stunning dioramas straight out of the box. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes bateaux militaires
1:350 Destroyer USS Benson DD-421, 1945
540001032€61.29
Article number: 540001032 Product: 1:350 Destroyer USS Benson DD-421, 1945 We are excited to announce the production of the 1/350 U.S.S. Destroyer Collection Part II. Previously, we produced three U.S.S. Destroyers (1021, 1026, and 1029) from different classes, and they sold out quickly due to high demand. As a result, some of you were unable to get the desired quantities. Now, here is an opportunity to obtain the 1/350 scale U.S.S. Destroyers once more. These three other World War II U.S.S. Destroyers, representing three different classes, will set sail soon. Don't miss out on this chance again. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes chars
1:35 Raketenwerf.auf Fahrgest.Pz.Kpfw.IV
540006883€95.99
Article number: 540006883 Product: 1:35 Raketenwerf.auf Fahrgest.Pz.Kpfw.IV The Pz.IV Rocket Launcher variant is a rare modification of the vehicle that removes the turret of the Pz.IV Ausf. C tank and instead mounts a new turret and a box-like four-tube rocket launcher. The launcher can be raised and lowered as needed. The launcher is protected by armored covers and four 28cm rockets can be installed in it. Additionally, a machine gun is mounted on the front of the new turret for self-defense. The 1/35 kit is based on highly regarded Dragon's Pz.IV Ausf. C tank, ensuring a high level of accuracy. The distinctive rocket launcher is faithfully reproduced using plastic parts and photo-etched parts. The kit also includes Magic Tracks easier assembly. This unique vehicle will be available by the end this year. Make sure not to miss out on this opportunity. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes chars
1:35 Sd.Kfz.250/1 NEU (Premium Edition)
540006476€75.99
Article number: 540006476 Product: 1:35 Sd.Kfz.250/1 NEU (Premium Edition) Designed by Demag and based on the D7 chassis, the original halftrack’s complex design of angled plates was considerably simplified in October 1943 in order to ease production. With the original 19 armored plates reduced to just nine, the resultant design is often referred to as the Sd.Kfz.250 NEU. Production of nearly 2,400 vehicles continued till July 1944. Importantly, Dragon is again offering 1/35 scale Premium Edition plastic kits of it. What is particularly notable is that Dragon is the only kit manufacturer to offer the Sd.Kfz.250 NEU in 1/35 scale! Item No. 6476 represents the base version, the Sd.Kfz.250/1 NEU that had two MG34 machine guns. Wearing the Premium Edition label, it’s upgraded with a number of stunning parts such as Magic Tracks, Gen2 soldier equipment and weapons to fill the vehicle interior, as well as metal width indicator poles and a bonus headlight. Assembly is eased by incorporating slide-molded parts, while a realistic tarpaulin over the troop compartment is replicated. The Sd.Kfz.250/1 Neu halftrack might be the base version, but this fantastic kit is anything but basic! Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes avions militaires
1:72 Do335B-4 Recon
540005033€33.49
Article number: 540005033 Product: 1:72 Do335B-4 Recon Dragon's Golden Wings series showcases 1/72 scale aircraft from World War II. This series includes several unique and highly sought-after models that have been unavailable for several years. Recognizing the demand from aviation modelers, we have carefully selected a few of these aircraft for production to meet modelers' needs. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes chars
1:35 Sd.Kfz.251/6 Ausf.C Command Vehicle
540006442€81.99
Article number: 540006442 Product: 1:35 Sd.Kfz.251/6 Ausf.C Command Vehicle The distinctive appearance of the Sd.Kfz.215/6 Ausf.C Command Vehicle has made it one of the popular choices within the Sd.Kfz.251 family. Its frame antenna and collapsible 8-meter rod antenna are iconic features. Our latest 1/35 scale model, the 6442 Sd.Kfz.251/6 Ausf.C, accurately reproduces these characteristic components. This new version also includes Ez Track, which allows for easier assembly without compromising accuracy. Metal width indicator poles are included as well. Additionally, to complement the detailed radio set, the box includes two figures of radio operators. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes chars
1:35 Pz.Bef.Wg.IIIAusf.K (2024Upgr.Vers)
540006853€88.99
Article number: 540006853 Product: 1:35 Pz.Bef.Wg.IIIAusf.K (2024Upgr.Vers) Unlike other Panzer III Command tanks, the Pz.Bef.Wg.III Ausf.K was equipped with a 5cm KwK39 L/60 cannon. Featuring a Panzer IV turret mounted on a Pz.III chassis, it is distinctly set apart from other command tanks in the German Army. The uniqueness of this vehicle makes it popular among modelers. Dragon released a 1/35 scale kit of the Pz.Bef.Wg.III Ausf.K a few years ago, and now it's time for a re-release with an upgraded version. The 2024 edition features newly added Magic Tracks, which will facilitate easier assembly and improved accuracy. An array of photo-etched parts, such as a star antenna, is provided to enhance the level of detail. Additionally, the aluminum gun barrel includes rifling inside. The grenade discharger and its mount are constructed from metal. This upgraded model is sure to be a highly sought-after item, so don't miss your chance - place your order as soon as possible. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes chars
1:35 Sd.Kfz.234/2 Puma (2024 upgrade ver
540006943€81.99
Article number: 540006943 Product: 1:35 Sd.Kfz.234/2 Puma (2024 upgrade version) Hot on the heels of reproducing two Sd.Kfz.234 items (6772 and 6814), we are now introducing the most popular Sd.Kfz.234/2 Puma for a limited production. This particular item, which is the most sought-after in the entire series, not only boasts impeccable detailing but also incorporates upgrades in this 2024 release. It features a metal barrel, a 3D-printed muzzle brake, a metal smoke-grenade rack and metal greande discharger, metal width-indicator poles, photo-etched parts for side fender hatch lids, and offers modelers a selection of two types of tires with different tread patterns. With its luxurious and irresistible content, this wheeled combat vehicle is bound to be in high demand among modelers once again. Detailed plastic kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes chars
1:35 Sd.Kfz.250/9 NEU 2cm Reconnaissance
540006316€81.99
Article number: 540006316 Product: 1:35 Sd.Kfz.250/9 NEU 2cm Reconnaissance Item No. 6316 accurately depicts the Sd.Kfz.250/9 NEU, which was a reconnaissance halftrack armed with a 2cm KwK38 cannon and an MG34 or MG42 mounted in a small Hängelafette (swing mount) turret. In production from May 1943, this vehicle type replaced the wheeled Sd.Kfz.222. Badged with the Premium Edition name, this upgraded kit features numerous bonus parts such as Magic Tracks, Gen2 soldier equipment and weapons to fill the vehicle interior, as well as metal width indicator poles and a bonus headlight. A photo-etched screen is provided to cover the one-piece slide-molded turret, plus there’s a photo-etched gun shield for the movable weapons. The distinctive stowage box doors on the hull sides are designed as separate parts, allowing modelers to display them either open or closed. This Sd.Kfz.250/9 Neu reconnaissance vehicle is the perfect asset for modelers to explore! Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.

Maquettes chars
1:35 Sd.Kfz.3aMaultierHalfTrack3,7cmFlaK
540006788€77.99
Article number: 540006788 Product: 1:35 Sd.Kfz.3aMaultierHalfTrack3,7cmFlaK Dragon has released different variants of the German Sd.Kfz.3 Maultier, such as cargo truck and ambulance. Each kit has been well received by modelers as they can be used wisely in the modelers dioramas of various battlefields. Now, Dragon is going to offer a special version of the "Mule", which features a lethal 3.7cm FlaK 37 anti-aircraft gun mounted on the rear cargo bed. Both the 3.7cm gun and the battlefield-modified truck has been authentically rendered with exquisite attention to detail. Besides, the magic track, a 3D-printing muzzel brake, photo-etched parts, metal width indicator poles and a bonus ammunition box are also offered for accurate details. The versatility of this vehicle, which can engage both air and ground targets, means it will fit well into a wide range of dioramas that modelers might create. Detailed Plastic Kit Attention ! Ne convient pas aux enfants de moins de 14 ans.