Accessories

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 560008046
Product: 1:64 Micro Track Stunt Loop Extension

Extend your Micro Scalextric racing world with this track extenstion pack, featuring a complete loop-the-loop, plus the connecting straight and half straight track pieces, extending your layout by 1.12m.

Article number: 560008045
product: 1:64 Micro Track Extension Set Straight/Curve

Extend your Micro Scalextric racing world with this track extenstion pack, featuring 5 x straights and 4 x 45 degree curves, to extend your layout by 1.48metres.

Article number: 560008515
Product: Scalextric Digital Plug Quer/Touring DPR

Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!

EasyFit Digital Plug

Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.
The conversion only requires a small screw-driver and takes less than sixty seconds to perform.

To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the EasyFit Digital Plug to the chassis.

Digital Easy Fit Plug

Article number: 560008329
Product: DIGITAL Round Guide Blade Set (4) Braid

Contents
Round Guide Blade
4 Braid Plates
1 Screw

Digital Guide Blade+Screws

Article number: 560008320
Product: Scalextric Grand Stand (Diorama)

A Grandstand to accessorise you track layout. Made of sturdy plastic, this building is robust and takes just minutes to assemble. Full assembly instructions and a sheet of decals are included.
The Grandstand is exactly one half-straight wide (500008207).
The Scalextric range of buildings have interchangeable modules. First floor sections can be moved from one ground floor base to another.

Special Features
Decal Sheet

Article number: 560008296
Product: SPORT Banked Curve 10° R2/45° (2)

Contents:
Radius 2 10 degree Banked Curve 45 degree x 2
Stage 1 Supports x 6


Create Indianapolis IRL and NASCAR style circuits or recreate 1930s banked circuit features such as Brooklands and other famous banked tracks.


Push-fit Scalextric track for quick and easy circuit building.
Connect modern Scalextric track to original track (which has ring-shaped connectors) using the 500008222 Converter Straight.

Rad 1 outer borders & barriers (for C8202)

Article number: 560008236
Product: SPORT Straight 78mm (2)

Contents
2 x 78mm Short Straights
Push-fit Scalextric track for quick and easy circuit building.
Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.

Straight 7,8CM SPORT 2X

Article number: 560008235
Product: SPORT Curve R4/22,5° (2)

Contents
Radius 4 Curve 22.5 degree x 2.


Push-fit Scalextric track for quick and easy circuit building.


Connect modern Scalextric track to original track (which has ring-shaped connectors) using the 500008222 Converter Straight.
Shown with 500008282 Radius 4 Inner Borders 22.5° and C8238 Radius 4 Outer Borders 22.5° (not included).

Article number: 560008233
Product: SPORT Lead in/Out Border Straight (2+2)

Use on straights ahead of corners to give an smooth lead in and lead out of corner borders sections.

Contents
2 x 350mm Lead In/Lead Out Borders
Shown with C8205 Standard Straight (not included).

Borders & Barriers - Lead-in/out (for C8205)

Article number: 560008228
Product: SPORT Outer Border Curve R2/45° (4)

Contents
Radius 2 Curve Outer Borders 45 degree x 4.

Shown with C8206 Radius 2 Curve 45° and C8225 Radius 2 Curve Inner Borders 45° (not included).

Rad 2 outer borders & barriers
(for C8206)

Article number: 560008225
Product: SPORT Inner Border Curve R2/45° (4)

Contents:
Radius 2 Curve Inner Borders 45 degree x 4.

Article number: 560008224
Product: SPORT Outer Border Curve R3/22,5° (4)

Contents
Radius 3 Curve Outer Borders 22.5 degree x 4.

Shown with Shown with C8204 Radius 3 Curve 22.5° and C8281 Radius 3 Curve Inner Borders 22.5° (not included).

Rad 3 outer borders & barriers (for C8204)

Article number: 560008223
Product: SPORT Border 175mm (4)

Contents
4 x 175mm Half-straight Borders

Shown with C8207 Half Straight (not included).

Borders & Barriers - Half Straight (for C8207)

Article number: 560008207
Product: SPORT Half Straight 175mm (2)

Contents
2 x 175mm Half-straight

Push-fit Scalextric track for quick and easy circuit building.

Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.
Shown with C8223 Half Straight Borders (not included).

Straight 17,5CM SPORT 2X

Article number: 560008206
Product: SPORT Std.-Curve R2/45° (2)

Contents
Radius 2 Curve 45 degree x 2.

Push-fit Scalextric track for quick and easy circuit building.

Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.

Shown with C8225 Radius 2 Inner Borders 45° and C8228 Radius 2 Curve Outer Borders 45° (not included).

Article number: 560008205
Product: SPORT Straight 350mm (2)

Contents
2 x 350mm Standard Straight

Push-fit Scalextric track for quick and easy circuit building.

Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.

Shown with C8233 Lead In and Lead Out Borders (not included).

Straight 35CM SPORT 2X

--> Alternativer Ersatz für Artikel:
500008526 / C8526
Erweiterungs-Pack 4 Gerade á 350mm

Article number: 560008202
Product: SPORT R1/45° Curve (2)

Contents
Radius 1 Curve 45 degree x 2

Push-fit Scalextric track for quick and easy circuit building.

Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.

Shown with C8240 Radius 1 Curve Outer Borders 45° (not included).

High quality color catalog
Content coated paper
Pages: 84 in landscape mode
Language: English
Assortment: 2020

Article number: 560008075
Product: Scalextric Braid (6)

Contents
Replacement Braids x 6

NB - this pack does not include any guide blades

Article number: 560007016
Product: SPORT Digital Single Lane 175mm (4)

The single lane half-straight can be used in conjunction with C7014 and C7015 Pit lane sections to build exciting track features.
Use with 560007017 Single Lane Curve to design single lane rally stages or pit roads, etc.
This sections is compatible with both Digital and standard Scalextric layouts.

Contents
4 x 175mm Single Lane Half-straight

Article number: 560007005
Product: Scalextric Digital Plug Retro/Univ.long

The in-car microprocessor module allows the conversion of a standard Scalextric car to work on Scalextric Digital layouts.

Most Scalextric cars, from 1957 to current date, can be converted to digital operation. The conversion requires hobbyist skills and some tools including a soldering iron.

For Digital Plug Ready Cars (DPR) use C8515 EasyFit Digital Plug or C8516 F1 EasyFit Digital Plug.

Article number: 500707130 Product: CARSON Dig.Plug. Quer Scalextric-Cxxxxxx

Decoder suitable for Scalextric Slot Cars/Touring (square), for use on Carrera® 132 digital tracks. Unscrew, install and get started!
Only suitable for Scalextric Easyfit Digital Plug Ready (DPR) slot cars.
 

Warning! Not suitable for children under 14 years.

TRACK EXTENSION PACKS - ANALOGUE & DIGITAL

Scope of delivery:

• 8 x C8205 straights

Article number: 500008515
Product: Scalextric Digital Plug Quer/Touring DPR

Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!

EasyFit Digital Plug

Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.
The conversion only requires a small screw-driver and takes less than sixty seconds to perform.

To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the EasyFit Digital Plug to the chassis.

Features
The EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds.
Each 500008515 EasyFit Digital Plug can be transferred easily from one car to another.
There is no need for a soldering iron or modelling expertise.

Note
500008515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.
To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use 500008516 F1 EasyFit Digital Plug.
Many non-DPR Scalextric cars can be converted to Digital using Digital Chips 500007005 and 500007006.

Digital Easy Fit Plug

Article number: 500008434
Product: Scalextric ARC Air Set Wireless Contr.

RCS Air
Analogue f. 2 drivers, 10 race modes, 11 In-Race-Gameplay (race start, jump start, weather conditions…)
Contains: 35 cm standard straight transformer, 2 wireless hand controllers 2.4 GHz

RCS™ Race Control System
Scalextric RCS™ is the first slot car Race Control System that allows users to wirelessly create and manage races through the use of a handheld Bluetooth SMART device.

RCS™ uses the latest Bluetooth technology (BLE) to communicate between a Bluetooth SMART device and one of the three new RCS™ Powerbases. The app will run on the top Apple and Android devices with BLE v 4.0. Apple – post iPhone 4S and iPad 4 (Retina). Android – Top 10 devices. A full list of compatible devices will be available at www.scalextric.com/RCS . The Scalextric RCS™ app will be free to download from the Apple iTunes store and Google Play store.

RCS One™ and RCS Air™ are both Scalextric analogue, allowing you to run two cars simultaneously. RCS Pro™ is Scalextric Digital, allowing up to six car racing and lane changing. RCS Air™ and RCS Pro™ both have a new style wireless hand throttle. However, these differ as RCS Pro™ is Scalextric Digital and requires lane change and break buttons.

All three RCS™ powerbases are on a standard Scalextric full straight. Simply replace it with another full straight or two half straights. You can only have one powerbase powered at any one time.

Only one device can be paired to an RCS™ powerbase at any one time. However, you can run additional six slave devices from the paired device. This allows up to 6 racers to view their own racing stats on their own device anywhere when racing.

Article number: 500008333
Product: Spark Plug Dongle Wireless Control EU

Spark plug dongle
Control your slot car with your smart device (smartphone or tablet).
The Spark plug is plugged in instead of the controller on the base -
download the app (Android or iOS) from "www.Scalextric.com/sparkplug" and install it on the device. Thus, no tangling is in the way and the "Sloten" can go. For the control a dongle is required per vehicle.

Furthermore, the APP asks for more game modes to choose from:
- Single or Versus (with opponents) Mode
- It also offers the possibility to drive with a standard controller and
smart device at the same base
- Boost function and speed limit (TopSpeed)
- Sound effects

The smart device controller with the APP can be personalized as desired, own controller skins, music recordings from the own playlist, engine sounds, controller layout (right handed / left handed) and further adjustment options.

Digital Guide Blade+Screws

Article number: 500008235
Product: SPORT Curve R4/22,5° (2)

Contents
Radius 4 Curve 22.5 degree x 2.


Push-fit Scalextric track for quick and easy circuit building.


Connect modern Scalextric track to original track (which has ring-shaped connectors) using the 500008222 Converter Straight.
Shown with 500008282 Radius 4 Inner Borders 22.5° and C8238 Radius 4 Outer Borders 22.5° (not included).

R4 CURVE 22,5 GRAD - 2X

Article number: 500008228
Product: SPORT Outer Border Curve R2/45° (4)

Contents
Radius 2 Curve Outer Borders 45 degree x 4.


Shown with 500008206 Radius 2 Curve 45° and 500008225 Radius 2 Curve Inner Borders 45° (not included).

Rad 2 outer borders & barriers
(for C8206)

Article number: 500008225
Product: SPORT Inner Border Curve R2/45° (4)

Contents
Radius 2 Curve Inner Borders 45 degree x 4.


Shown with 500008206 Radius 2 Curve 45° and 500008228 Radius 2 Curve Outer Borders 45° (not included).

Rad 2 inner borders & barriers
(for C8206)

Article number: 500008206
Product: SPORT Std.-Curve R2/45° (2)

Contents
Radius 2 Curve 45 degree x 2.


Push-fit Scalextric track for quick and easy circuit building.


Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.
Shown with C8225 Radius 2 Inner Borders 45° and C8228 Radius 2 Curve Outer Borders 45° (not included).

STANDARDCKURVE 45GR.SPORT 2X

Article number: 500008205
Product: SPORT Straight 35CM

Contents
2 x 350 mm Standard Straight


Push-fit Scalextric track for quick and easy circuit building.


Connect modern Scalextric track to original track (which has ring-shaped connectors) using the 500008222 Converter Straight.
Shown with 500008233 Lead In and Lead Out Borders (not included).

Straight 35CM SPORT 2X

--> Alternativer Ersatz für Artikel:
500008526 / C8526
Erweiterungs-Pack 4 Gerade á 350mm

Article number: 500008202
Product: SPORT R1/45° Curve (2)

Contents: Radius 1 Curve 45 degree x 2


Push-fit Scalextric track for quick and easy circuit building.


Connect modern Scalextric track to original track (which has ring-shaped connectors) using the 500008222 Converter Straight.
Shown with 500008240 Radius 1 Curve Outer Borders 45° (not included).

R1 CURVE 45 GRAD - 2X

BRAID PACK (6)

Article number: 500003942 Product: 1:32 Mercedes AMG GT3 2017 Team ABBA HD

No stranger to the British GT Championship, Martin Short returned to the series in 2016 with a BMW Z4 GT3, but for 2017, along with car owner Richard Neary, he debuted this fantastic chromed Mercedes AMG GT3. Some bad fortune in the opening rounds dented the team’s championship hopes, but there can be no doubt that the car was amongst the most striking on the grid, and probably the best sounding, powered by the mighty V8 engine.

Later in the year the team was augmented by the very successful international racer Adam Christodoulou and the squad saw some good results as the season drew to a close. They go into 2018 looking stronger than ever, with a great line up and a team to propel them towards victory.

Finish: Chrome Number: 88 Race: British GT Team: Team ABBA with Rollcentre Drivers: Martin Short, Richard Neary Year: 2017

Features:

Digital Plug Ready
Easy Change Pick-Ups
High Detail
Magnatraction
Working Headlights
Working Rear Lights

- Scale 1:32
- Scalextric digital decoder 500008515
- Carson digital decoder 500707130