Plastic Models

Article number: 510003845
Product: 1:24 Dumper Trailer

Mod.Dim.: 37,0 cm

This great three axis trailer has been developed for earth and building debris transportation within construction sights. Equipped with high resistant steel chasse, it is capable to support stress on unpaved working areas. Characterized by a large tipping bucket capable of several tons payload. This trailer has installed with an efficient braking system enabling to guarantee maximum safety during transportation. It is further has a bucket covering system to eliminate loss of material risks while moving.

Warning! Not suitable for children under 14 years.

Article number: 510003825
Product: 1:24 US Wrecker Truck

Mod.Dim.: 34,5 cm

Every year, more and more goods trucks roll onto the roads of the United States: inevitably, this has led to an increase in the number of vehicles designed to handle truck breakdowns. These breakdown vehicles – nothing less than true mobile workshops – are a common sight along the roads of this immense country. Numerous compartments on the flanks of the vehicle contain all the materials and tools needed for the fast repair of damaged trucks; moreover, the heavy-duty towing gear at the rear of the vehicle allows trucks to be taken to the nearest full-scale workshop when repairs cannot be completed at the roadside.

Warning! Not suitable for children under 14 years.

Article number: 510003824
Product: 1:24 Mercedes-Benz Actros 2003

Mod.Dim.: 24,2 cm

This latest generation of Mercedes Benz Actros trucks was launched on the market in Spring 2003. Used to transport heavy loads over long distances, these models differ from their predecessors mainly as regards safety, running costs and driver comfort. The most significant developments are to be found in the drive cab interior (designed to satisfy even the most demanding truckers), the ever-more powerful engines and the technical improvements made to the drive axle. Externally, the new Actros trucks are characterised by the radiator grill, which have the fins set more widely apart to increase air flow and the new lights with super-clear casings and variable-focus reflectors. All Actros engines are of the new V-type Series 500: the V8 engine installed on the 1854 LS version provides from 503 to 578 HP.

Warning! Not suitable for children under 14 years.

The model Volvo FH16 GLOBETROTTER XL in 1/24 scale has a length of about 244 mm.

With the new Volvo FH16, Volvo once again offers a truck in the heaviest segment. It is based on the FH Series that was launched in autumn 2001, but it also features new technology that is unique to the Volvo FH16. The new Volvo FH16 is the most powerful, comfortable and safe model ever built by Volvo Trucks. Among the highlights of the new model are an all-new 16-litre engine with a power output of 610 horsepower, an exclusive interior and body features, and an advanced active safety system. The Volvo FH16 Series is built to tackle the toughest transport assignments with high gross vehicle weights and high average speeds in hilly terrain.

Warning! Not suitable for children under 14 years.

Article number: 510003820
Product: 1/24 U.S. Superliner Power Truck

Model Dim.: 35,22 cm

This large tractor is representative of many trucks used in the USA. Equipped with powerful engines and very large fuel tanks, these vehicles travel hundreds of miles at a time from one State to another. Characterised by large drive cabs with in-built sleeping facilities and every other possible comfort, they are, for their American drivers, a true home from home. Numerous on the road movies have succeeded in making this category even more popular.

Warning! Not suitable for children under 14 years.

Article number: 510003784
Product: 1:24 Iveco-Magirus DLK 23-12 Fire Ladder

Model Dim.: 36.9 cm

SUPER DECALS SHEET FOR 5 VERSIONS - WORKING AND EXTENDIBLE LADDER

Due to ever increasing safety requirements at modern buildings to-days fire engines require extremely high standards. The ladder (DLK 23-12) enables the fire fighters to reach a max. height of 23 m. at a distance of 12 m. These ladders are being mounted on different truck Chassis according to customers specifications, where by the assembly is carried out by specialized companies, in our case by Magirus-IVECO. The ladder contains 4 units made out of steel profiles with a basket at the end which can take up to 3 persons. Thus the vehicle is usable for firefighting as well as rescue missions. To increase the stability those turntable ladders have lateral supports Our model consists of a detailed truck with turntable ladder which can be mounted in firefighting or moving positon.

Detailed Plastic Kit of model
veco-Magirus DLK 23-12 Fire Ladder
in scale 1:24

Warning! Not suitable for children under 14 years.

The model HEAVY TANK TRAILER ''TOPAS'' in 1/24 scale has a length of about 430 mm.

This modern tank trailer was built according to the latest findings in regards to safety measures. "TOPAS" stands for "Tank vehicle with optimal passive and active safety installations". These include: ABS, low gravity-center, high-positioned break lights and chassis protection built in aerodynamic shape. The tank has elliptic double wedge shape and for weight reasons is built of light metals. In the future, because of their highly inflammable payload, most tank trailers will be built in similar shape.

Warning! Not suitable for children under 14 years.

Article number: 510003703
Product: 1/24 Rolls Royce Phantom II

The model Rolls Royce Phantom II in 1/24 scale has a length of about 235 mm.

The Rolls-Royce Phantom II was introduced in 1929. With this new model the tradition of the manufacturer was continued: To build beautiful and expensive cars. Each body was made to order of each customer. Our model belongs to the P-2 series, which was built in 1934. The original, from which this model, was copied, can still be found in the famous Stratford Motor Museum in England.

Article number: 510003701
Product: 1/24 Mercedes Benz 540K

The model Mercedes Benz 540K in 1/24 scale has a length of about 243 mm.

One of the most beautiful automobiles of its time, the Mercedes Benz 540K was built from 1936-39. One unit is still shown in various parts of the world by Mercedes for promotion purposes. The car had a 8-cylinder 5.4 l engine and weighed no less than 2300 kg. Maximum speed was a stunning 170 km/h. Its fuel consumption was 28 to 30 liter for 100 km.

Article number: 510003662
Product: 1:24 Fiat 131 Abarth Rally

Model Dim.: 17,4 cm

SUPER DECAL SHEET
EXTRA CATALOGUE

The Fiat 131 Abarth was built on the frame of the two-door Fiat sedan. The development made by Abarth considered several modifications and improvements starting from the reduction of the body weight using lighter materials. Then some new fenders, to permit the adoption of larger wheels, were installed and new air-intakes on the hood and on the sides to optimize the cooling of the mechanics were designed. The engine was a 4-cylinder longitudinal engine characterised by the use light alloy head and 4 valves per cylinder. The Fiat 131 Abarth was built from 1976 and it was used in the World Rally Championship where achieved important results as three manufacturers’ championship, one pilots’ championship and one FIA trophy. It took part in international competitions until 1982 when it was replaced by the Lancia brand cars.

Detailed Plastic Kit of model
Fiat 131 Abarth Rally
in scale 1:24

Article number: 510003661
Product: 1:24 Range Rover Police

Model Dim.: 24,1 cm

The Range Rover Classic can be considered a milestone in the history of off-road vehicles. It was produced in numerous variants and versions from 1970 to 1996. It was the first vehicle produced under the "Range Rover" brand and from 1981 it was available in the two- or four-door version. Thanks to its 4x4 traction and its sturdy structure, simple for construction but very reliable, the Range Rover was able to achieve very good off-road performances. The vehicle was able to obtain, very soon, good commercial success all over the World. The Range Rover, furthermore, was widely used by bodybuilders to create numerous special versions able to satisfy satisfy all types of needs. It has also been used by Police Departmets, Security Services and a lot of Public Services Fleet.

Detailed Plastic Kit of model
Range Rover Police
in scale 1:24

Article number: 510003660
Product: 1/24 Land Rover Fire Truck

Length of the model 185 mm

New Parts

The "Land Rover" was certainly one of the most famous symbols of "Made in England" automobile production and is a real milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes realized on 1947. It has been characterized by the 4x4 traction system and by a robust and reliable design able to tackle the most difficult and challenging trails. The aluminum body provide lightness but, at the same time, more resistance against corrosions and more durable in time. In 1971, when the III Series was introduced, more than 1,000,000 of Land Rovers has been produced. Available in two versions: the "standard " one and the "long wheel base". Thanks to its extraordinary versatility was used in both military and civilian duties. Interesting the versions realized for the Fire Departments and made with the firefighting equipment.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510003658
Product: 1:24 Lancia HF Integrale

Model Dim.: 16,0 cm

COLOR INSTRUCTION SHEET

The Lancia Delta HF four wheels-drive is considered an Icon of the Rally Competitions History. The Delta HF was produced in the second half of the 80s and participated in the World Rally Championship from 1987 to 1988 winning two world titles and achieving important results in a lot of competition as the Rallye de Monte-Carlo and the Rallye San Remo. The Lancia Delta Integrale was the evolution of the Delta HF. It was introduced in 1988 and dominated the World Rally Championship winning several constructors’ championship and an impressive number of
competitions up to 1993. Updated in many aesthetic details that made it more muscular and aggressive, as the enlarged fenders and the new designed air intake on the engine bonnet, the Lancia HF Integrale was also improved in driving and engine performance. The 1995 cm3 turbocharged engine increased its power up to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and early 90s, bringing many famous pilots as Miki Biasion or Juha Kankkunen to victory.

Detailed Plastic Kit of model
Lancia HF Integrale
in scale 1:24

Article number: 510003657
Product: 1:24 Ford Transit UK Police

Model Dim.: 18,5 cm

The Ford Transit is a light commercial vehicle range which first entered production in 1965 as a Joint venture between Ford Germany and Ford Great Britain. Prior to 1965 there had been a Ford Taunus Transit which was built by Ford of Germany in 1953. The Ford Transit Mk.2 was produced from 1978 – 1986. This Van was produced in both Fords Genk factory in Belgium as well as in Fords UK factories, initially in Langley before moving to Southampton due to higher demand than originally expected. This version depicts a Police Control Vehicle as used by the Metropolitan Police Force in the 1980’s. They were usually used during major traffic incidents, and during major public events, such as football matches, concerts, New Year celebrations etc. This 1:24 scale kit contains five separate sprues and can be built up both as a LHD or RHD version.

Detailed Plastic Kit of model
Ford Transit UK Police
in scale 1:24

Article number: 510003653
Product: 1:24 Alfa Romeo Giulietta Spider 1300

Model Dim.: 16,2 cm

COLORS INSTRUCTIONS SHEET - DETAILED ENGINE - CHROME PARTS AND CAPOTE FOR CLOSED VERSION

In 1962 the Alfa Romeo Giulietta Spider evolved with the adoption of some aesthetic improvements on the bodywork, some interior details and, the new 1.570 cm3 four cylinder engine able to release 92 Hp. Thanks to the new engine the Italian car was able to reach the max speed of 172 Km/h. The mechanical lay-out was based on the rear-wheel drive and four independent wheel suspension. The "Veloce" sport version was able to offer to the customers a powerful engine (112 Hp) with two carburetors and the adoption of the disk brakes on the frontal wheels.

Detailed Plastic Kit of model

Article number: 510003651
Product: 1:24 Renault 5 Alpine

Model Dim.: 14,7 cm

EXTRA CATALOGUE
Decal sheet for black or blue body color

The Renault 5 is a real icon of the French automotive World. The small car, developed by Renault, was produced from the beginning of the ‘70s to the first half of the ‘80s and it rapidly achieved an extraordinary commercial success in several Countries. The most relevant success factor was a very good mix between functionality, appealing design, reliability and smartness. From the chassis of the Renault 5 was developed the sport version Alpine that was characterized by high standard in terms of performance for a small urban car. It adopted the air-cooled 1397 cc 4-cylinder engine capable of delivering 93 Hp. Furthermore several new solutions were used on the Alpine as the braking system with front discs and rear drums or the use of innovative materials. Small, compact but with a very good performance especially in the acceleration and in the drive-ability.

Detailed Plastic Kit of model
Renault 5 Alpine
in scale 1:24

Article number: 510003650
Product: 1:24 Ford Escort RS 1800 MK.II Lombard

Model Dim.: 16,7 cm

EXTRA CATALOGUE SUPER DECALS SHEET

The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Successful results has been achieved. From 1975 to 1979 the Ford Escort RS 1800 won for five consecutive years the prestigious RAC (Royal Automobile Club) Rally, the most important rally event organized in the United Kingdom and an important milestone of the World Rally Championship. Among the others the team Mikkola Hannu - Hertz Arnee won the "Lombard" on 1978 and 1979

Detailed Plastic Kit of model
Ford Escort RS 1800 MK.II Lombard RAC Rally
in scale 1:24

Article number: 510003649
Product: 1:24 Lamborghini Miura Jota SVJ

Length of the model 187 mm

NEW MOULDS

The Lamborghini Miura was produced by the Italian manufacturer between 1966 and 1973. The Miura, when it was presented on the market, was a real supercar characterized by high performance and innovative design. In 1970, on the layout of the Miura, a specific version dedicated for the competitions was created through improvements on chassis and suspensions. Other significant changes where implemented on engine power and on the braking system. The commercial name of this unique car with a power of 440 Hp and outstanding performances was "Jota". However, due to several requests from customers, Lamborghini modified some Miura SV series with specification similar to Jota. These cars were identified by the acronym SVJ and became soon the dream of car experts and funs all over the World.

Detailed Plastic Kit of model Lamborghini Miura Jota SVJ in scale 1:24

Warning! Not suitable for children under 14 years.

Article number: 510003648
Product: 1:24 Porsche 956

Length of the model 199 mm

SUPER DECALS SHEET

The Porsche 956 was built by the German manufacturer in 1982 to participate in the World Sport-Prototype Championship in the new Group C category. The "956" was a radical revolution compared to the previous Porsche 936 that won several competition between 1976 and 1981. Porsche to be comply with the new championship’s regulations introduced on the new "956" several technical innovations as the aerodynamic solutions and the aluminium monocoque chassis. The engine was the reliable 2,650 cm3 6 cylinders turbocharged engine able to release 635 Hp. Porsche 956 proven to be an effective and successful Sport car winning several Sport-Prototype Championships and four editions of the famous 24 Hours of Le Mans the World’s oldest sport car race in endurance racing.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510003647
Product: 1:24 Fiat "500" (2007)

Length of the Model 148 mm

In 2007, the Fiat Group presented the successor to the most iconic car of Italian automotive production: the Fiat 500. The new model features a distinctive design and interesting retro-style as modern reinterpretation of the "classic" Fiat 500 launched on the market in 1957. Thanks to its unique design, the adoption of the most innovative technological and safety solutions, the Fiat 500 is positioned on the market as a premium city car, accessible but at the same time exclusive. The wide range of versions and accessories enhance the possibility for the customer to personalize the car and make it unique. From its release on the market the car adopted several engines from the twin-cylinder petrol 895cc "Twinair" to the four-cylinder diesel 1,248 cc "Multijet

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510003646
Product: 1:24 Porsche 944 S Cabrio

Model Dim.: 17,5 cm

COLOR INSTRUCTIONS SHEET

The Porsche 944 was produced from 1982 to 1991 and was an evolution of the model 924 maintaining the aesthetic line. The car was originally equipped with a fuel injection engine from 2479 cc capable of delivering power of 163 hp. and made according to the Transaxle concept (rear engine and front shifter). The 944 was produced in different versions with different engines and extensive redesign of the interior in coupe and convertible configurations. In particular, the S variant, introduced in 1987, was equipped with a 16 valve engine generating 189hp and able to achieve speeds from 0 to 100 km / h in 7.2 seconds. 9800 were built. In 1989, Porsche introduced the 944 S Cabriolet, featuring a convertible body style, that obtained a good commercial success even in the U.S. market

Article number: 510003645
Product: 1:24 Mercedes Benz 300 SL Gull Wing

Length of the model 148 mm

The Mercedes-Benz 300 SL was produced in 1954 by the German car manufacturer and it’s a masterpiece on four-wheels for design, elegance and luxury. The 300 SL, where the acronym stands for Sport Leicht, (Sport Light), adopted innovative solutions for the time. The Mercedes 2 door coupe had a tubular frame, a front 2.996 cc longitudinal engine connected to a 4-speed transmission and the rear drive. The maximum speed of 300 SL was 260 Km/h (162 mph). The real strength of the car, however, was in its innovative design and the adoption of the characteristic and eye-catching Gull-wing doors. Even today the Mercedes-Benz 300 SL is an icon of design and style of the period ant it is a real icon for collectors and fans.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510003644
Product: 1:24 Range Rover Classic

Model Dim.: 24,1 cm

The Range Rover Classic can be considered a milestone in the history of off-road vehicles. It was produced in numerous variants and versions from 1970 to 1996. It was the first vehicle produced under the "Range Rover" brand and from 1981 it was available in the two- or four-door version. Thanks to its 4x4 traction and its sturdy structure, simple for construction but very reliable, the Range Rover was able to achieve very good off-road performances. The vehicle was able to obtain, very soon, good commercial success all over the World. The Range Rover, furthermore, was widely used by bodybuilders to create numerous special versions able to satisfy all types of needs. Continuously improved, during its career, in terms of engines, mechanical feature, interiors and details, it has always kept its role of "off-road" and "made in England" icon.

Detailed Plastic Kit

Article number: 510003642
Product: 1/24 Audi Quattro Rally

SUPER DECALS SHEET

In 1980, during the Geneva Motor Show, the German car manufacturer presented to the public its new twodoor coupé called Audi Quattro. Produced for all the '80s the Italian name choosed by Audi (Quattro is the Italian word for "four") ine was pointed out the main feature and the most important selling point : the fourwheel drive. It was the first time that the 4x4 solution was adopted on a coupé with the goal to achieve high numbers in terms of production and sales on the market. The Audi Quattro was able to release good driving performance, thanks to its frontal longitudinal engine, and very good reliability on all type of road conditions. From the mass production a dedicated car for competitions was developed on 1981 and it debuted in the World Rally Championship, achieving good results. The success of "Quattro" cars is still existing today in fact the name has become a real "brand" that identifies all the range of Audi’s four wheel drive production.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510003641
Product: 1:24 Lancia LC2

Model Dim.: 20,0 cm

SUPER DECALS SHEET - COLOR INSTRUCTIONS SHEET

The LC2 was built by the Italian manufacturer Lancia to compete in the World Sport Prototype Championship at the beginning of ‘80s. Characterized by a clean and elegant design able to optimize the aerodynamic performance, the Lancia LC2 adopted a Ferrari V8 twin-turbocharged engine, prepared by Abarth, with a displacement of 2,599 Cm3 (later increased to 3,014 Cm3). The car made its debut in 1983 competitions where it was able to compete in terms of speed and performance to the Porsche cars, reference point in racing competition at those time. However the lower level of reliability affected the results. A lot of Italian drivers raced on the Lancia LC2 before to became famous in Formula 1 racing as Patrese, Alboreto and Nannini.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510003640
Product: 1:24 Mercedes Benz G 230

Length of the model 19,3 cm

The Mercedes-Benz G-Class (G stands for Geländewagen, ie off-road) is a vehicle produced by the German company Mercedes-Benz since 1979 in different series. In some European countries it was marketed as Puch G. By 2017, over 300,000 were built. The history of the G-Class has its roots in 1972, when the leaders of the German company made an agreement with the Austrian Steyr-Daimler-Puch for the production of a modern and elegant off-road vehicle, but also robust and efficient, in short, suitable for any use. The production of the G-Class basically consists of three generations, all of which share the same mechanical architecture and the same basic structure, of the separate-chassis type with all-wheel drive, gearbox with reduced gears and rigid axle suspension (only in the third generation and limited the independent wheel solution was introduced to the front end only). In the first versions put on the market the gearbox was of the manual 4-speed type, although later on the transmission variants would have diversified to a considerable extent. The first generation was also produced under the Peugeot brand under the name of Peugeot P4: the other two series were produced more or less in the same period.

Article number: 510003639
Product: 1:24 Porsche 935 Baby

Model Dim.: 19,6 cm

SUPER DECALS SHEET

To compete in the FIA-Group 5 car competitions, Porsche developed a special car line characterized by dedicated engine and chassis solutions, beginning with the production of the famous 911 Turbo. Several versions of this model were made, but one of the most famous was the Porsche 935J. The "Baby" as it was known, was built to compete in the 2.0-liter German national championship. The car used a 1.425 air-cooled engine with a power performance of 261Kw. The Porsche 935J achieved an important victory in the 1977 German Grand Prix held in Hockenheim, that proved its excellent engine performance and design features.

Detailed plastic kit in scale 1:24

Article number: 510003638
Product: 1:24 Mercedes Benz 600S

Model Dim.: 20,5 cm

CHROMED PARTS - COLOR INSTRUCTIONS SHEET

From the second half of the 1950s, the famous German automotive manufacturer developed ist most prestigious car line in terms of features, engines, fittings, and details, identifying it with the initial’s "S" (where S stands for Sonderklasse). The S-class cars produced over the years have always been a reference point for elegance and style in the World automotive production. The size was also important to point out the "flagship" role of the of these recognizable German automotive productions. The S-class price has always been high, not only for the choice of luxury materials but also to support the "premium" positioning on the market.
Among the versions that have had great commercial success we can mention the "third generation", produced from 1991 to 1998 and the "fourth generation" produced from 1998 to 2005.

Detailed plastic kit in scale 1:24

Warning! Not suitable for children under 14 years.

Article number: 510003612
Product: 1:16 Mercedes-Benz 300 SL Gullwing

Length of the model: 286 mm

BACK AGAIN!

The Mercedes-Benz 300 SL was produced in 1954 by the German car manufacturer and it’s a masterpiece on four-wheels for design, elegance and luxury. The 300 SL, where the acronym stands for Sport Leicht, (Sport Light), adopted innovative solutions for the time. The Mercedes 2 door coupe had a tubular frame, a front 2.996 cc longitudinal engine connected to a 4-speed transmission and the rear drive. The maximum speed of 300 SL was 260 Km/h (162 mph). The real strength of the car, however, was in its innovative design and the adoption of the characteristic and eye-catching Gull-wing doors. Even today the Mercedes-Benz 300 SL is an icon of design and style of the period ant it is a real icon for collectors and fans.

Deatailed plastic kit

Warning! Not suitable for children under 14 years.

Article number: 510002991
Product: 1:12 F-104G Cockpit

Model Dim.: 14,7cm/9,0 cm

124 parts - Fully detailed real F-104 cockpit controls - Fully detailed Martin Baker Mk.I Q ejection seat - Complete cockpit dials decals - Adhesive acetate silk seat belts - Pilot’s helmet and oxygen mask - Pilot’s visor, gunsight and radar scope clear parts

The Lockheed F-104 Starfighter is one of the most renowned fighters in aviation history and also the one with the longest operational service. Its history began at the end of the ‘50s and ended with some air forces in the mid-2000s. Its unique airframe, with slender fuselage and very little wing surface, made this aircraft ideal in an interceptor role. Due to the thrust of its General Electric J79-GE-11A afterburning turbojet engine it could exceed Mach 2,2 with a first class rate of climb. This scale model kit allows modelers to recreate the famous "Starfighter" cockpit with the typical internal layout of the ‘50s and ‘60s fighters, which was ‘home’ to many former NATO pilots. The fine detail of the instrument panel typical of the period, is matched by the highly accurate reproduction of the Martin-Baker ejection seat.

Detailed plastic kit in scale 1:12

Article number: 510002802
Product: 1:48 HURRICANE Mk.I

Size: 20,5 cm

SUPER DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET

The Hawker Hurricane has been the most widely used fighter by the British Royal Air Force at the beginning of World War II. The Hurricane was powered by a Rolls-Royce Merlin 12-cylinders, liquid-cooled, with more than 1,000 HP that could lead to a speed above 500 km/h. The eight 7.7 mm Browning machine guns, which equipped it , guaranteed a good firepower. Although it was slower and more antiquated, for aerodynamic design, then the famous "colleague" with whom it shared the operational engagement during the Battle of Britain, however, was more robust, cheaper and easier to maintain and repair. He has contributed significantly to the victory of the RAF during the Battle of Britain, but during the war, it has gradually given the role of front-line fighter to the more modern Spitfire.

Detailed plastic kit

Article number: 510002799
Product: 1:48 F-86E Sabre

Model Dim.: 23,8 cm

SUPER DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET

The single-engine jet fighter F-86 Sabre was developed by the American aircraft company North American Aviation in the late 1940s and became a key aircraft in terms of post-war military aviation. The F-86 adopted a swept-wing design, incorporated a large front air intake and used the General-Electric J47 jet engine. It was widely used by the U.S.A.F. and played a key role during the Korean War where it could effectively ounter the Soviet fighter Mikoyan-Gurevich Mig-15, in the first jet dogfights in history.

Detailed plastic kit in scale 1:48

Article number: 510002798
Product: 1:48 MiG-23 MF/BN "Flogger"

Model Dim.: 35,2 cm

EXTRA CATALOGUE - ONE MODEL – 2 VERSIONS
SUPER DECALS SHEET

The Mikoyan-Gurevich MiG-23 had its maiden flight on 10th June 1967, and on 9th July it was unveiled to the public at the Domodedovo airshow, receiving the name "Flogger" in NATO code. The particular new feature of this aircraft were the variable-geometry wings, unprecedented in the history of Soviet aeronautic construction; nonetheless, the development time was relatively brief for such an innovative project, and the first pre-production variant went into service as early as 1971.A ground attack variant, the MiG-23BN, was also developed and was the backbone for a more specialized assault version named MiG-27. The last MiG-23s in front line service were retired from Russia and Warsaw Pact front-line aviation regiments around 1999-2000.There are some small numbers of these aircraft still servicing in Middle East recent wars, as recent Libya and Syria conflicts.

Detailed plastic kit

Article number: 510002797
Product: 1:48 A-7E Corsair II

Model Dim.: 29,0 cm

From ESCI moulds
SUPER DECALS SHEET

The LTV A-7 Corsair II was designed and implemented in the first half of the 1960s to satisfy the specific United States Navy request to have a new carrier-capable light attack aircraft able to replace the Douglas A-4 Skyhawk and the piston-powered Douglas A-1 Skyraider. It was directly developed by the fighter Vought F-8 Crusade airframe. The A-7 was characterized by the large frontal air intake under the cabin, by the 35° foldable swept wing to optimize the use and the storage on the aircraft carriers flight decks and by the adoption of a modern Head-up-Display to enhance the operational effectiveness. Thanks to its underwing hardpoints the A-7 was able to carry an impressive offensive load based on conventional bombs, guided bombs as the Paveway and air-to-surface missiles. The A-7E was the last version produced for the U.S Navy with an improved operational capability and the possibility to use the Harpoon anti-ship missiles and the AGM-88 HARM anti-radiation missiles.

Detailed plastic kit

Article number: 510002796
Product: 1:48 Alpha Jet A/E

Model Dim.: 24,5 cm

ORIGINAL MOULDS FROM ESCI - SUPER DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET

The Alpha Jet advanced trainer is the result of a collaboration project between the French and German aviation industry. Developed by Dassault Aviation and Dornier Flugzeug-Werke, the most relevant features were the swept wing layout, the twin-engine solution with the adoption of SNECMA turbofans able to provide a max speed of 1,000 Km/h. and the tandem two-seats cabin. It was a compact and highly manoeuvrable plane ideal to perform its main role of advanced trainer. However it was also used as light ground attack plane. The Alpha Jet could be armed with a 27 mm. (or 30 mm.) gun in a centreline pod and thanks to its four hard points it could load and use air-to-air and air-to-surface weapons. It entered in service at the end of the 1970s and is still used by numerous military air forces. The French Armée de l’Air is using the Alpha Jet to equip the official display team Patrouille de France.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510002795
Product: 1:48 P-40E/K Kittyhawk

Length of the model 197 mm

EXTRA CATALOGUE - NEW DECALS SHEET
Based on the design of the previous single-seat radial engine fighter Curtiss P-36, the Curtiss P-40 has become one of the most famous and used aircraft of the Second World War. Between 1941 and 1944 he also played a key role in many operational theaters from North Africa to Italy, from China to the South Pacific. Characterized by a very robust and reliable aerodynamic structure, the Curtiss P-40 was equipped with an Allison V-12 engine, capable of delivering more than 1,150 HP. Thanks to it, the Curtiss P-40 was able to reach the speed of 580 Km / h. It served as air superiority fighter and fighter bomber. One of the most successful version was the
P-40E. Used by U.S. fighter squadrons and, as Kittyhawk , by Commonwealth Air Forces, the P- 40E was heavily armed with six 12.7 mm. M2 Browning machine guns installed in the wings.
Furthermore, thanks to its under wings hard-points, able to carry nearly 900 Kg. of bombs, it was also able to satisfy close air support duties.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510002794 Product: 1:48 Messerschmitt BF 110 C-D

Length of the model 251 mm
SUPER DECALS SHEET

Together with the fighter Messerschmitt Bf 109 and the dive bomber Junkers Ju-87 Stuka the Messerschmitt Bf 110 Zerstörer is considered one of the symbols of the Luftwaffe during the Second World War. The Bf 110 was a twin-engine heavy fighter and fighter-bomber and was widely used by the German Air Force during the war in various versions to perform different operative tasks : fighter-bomber, interceptor, night-fighter, reconnaissance and anti-ship aircraft. Thanks to its two Daimler-Benz DB 601 engines, the Messerschmitt Bf 110 was able to reach the max speed of 560 Km/h. In detail the C and D versions were used on all fronts since the early stages of the war. They were heavily armed with two 20 mm cannons, four 7.92 MG 17 machine guns and one MG 15 as rear defensive armament. Furthermore under the wings the Bf 110 could carry bombs or additional fuel tanks to increase the operating range.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510002791
Product: 1:72 F/A-18E Super Hornet

Model Dim.: 37,5 cm

SUPER DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET

The Boeing F / A-18E Super Hornet is a modern twin-engine, carrier-capable, single-seat fighter directly derived from the original design of the McDonnell Douglas F / A-18 Hornet. Larger and heavier than its predecessor, it is characterized by significantly improved in flight and combat performances. The easiest to recognize features are the new shape of the wings, able to guarantee the highest standard in terms of maneuverability, the intake ramps for the engines and the tail. It entered in service with the United States Navy in the early 2000s to replace the F-14 Tomcats to perform the fleet air defense tasks. With and increased mission range and the adoption of improved avionic systems it is one of the most effective carrier-based fighter. It has a 20 mm M61 internal gun and can carry air-to-air missiles in its hard points. To perform its secondary role of attack plane it can also carry an impressive variety of air-to-surface weapons.

Article number: 510002790
Product: 1:48 Bye-Bye MIRAGE F.1

Length of the model 319 mm

NEW PARTS
SUPER DECALS SHEET

The Mirage F1 was developed by the French aircraft manufacturer Dassault to equip the French Air Force (Armée de l'air) squadrons with a modern multi-role fighter. The Mirage F1 entered service at the beginning of the seventies and was characterized by a shoulder-mounted swept wing and the adoption of the Snecma Atar turbojet engine giving the aircraft a max speed of Mach 2,2. During the years, several versions of the F1 were produced and most of them dedicated to export. For instance the Mirage F1 CR was set to perform aerial reconnaissance tasks adopting internal equipment and external pods. The Mirage F1 CT was the ground attack version and was developed to replace the old Mirage IIIE. It was improved with more modern avionics and ground targets identification and tracking systems.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510002788
Product: 1:48 A-1H Skyraider

Length of the model 246 mm

SUPER DECAL SHEET

The Douglas Skyraider was manufactured immediately after War World II. Despite its traditional piston motor, in an age when jets were spreading, the Skyraider had an extraordinary long career. It made its first flight in 1945 and it was retired from service only in 1975. It has participated to several conflicts, demonstrating its value in Korea and in Vietnam. Characterized by low speed maneuverability, it was able to transport impressive war cargos of over 3,500Kg. Perfect for ground attack missions, it was provided with robust armor to minimize fire damages from the enemy. The Skyraider A-1H, thanks to its powerful 2,700 HP radial engine, was able to reach the max speed of 322 mph and it was able to load an impressive variety of armaments. Furthermore it was equipped with four 20 mm. gun

Detailed Plastic Kit of model A-1H Skyraider in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002787
Product: 1:48 B-25G Mitchell

Model Dim.: 33,6 cm

COLORED INSTRUCTION SHEET
EXTRA CATALOGUE
SUPER DECAL SHEET FOR 4 VERSION

The North American B-25 Mitchell was probably one of the best medium bombers of World War II. The first flight of the twin-engine North American plane was done in 1939. Powered by two 1750 HP Wright R-2600 Cyclone engines, the B-25 was characterized by an extraordinary operational flexibility. It took its nickname in honor of General Billy Mitchell considered, in effect, the father and the founder of United States Air Force. From the first versions, used for the main task of medium bomber in level flight, were progressively develop and implement further variations. In particular, following the specific need for a ground attack and close support aircraft, was made the B-25G. It was equipped with a closed nose, instead of the transparent one, with two .50 machine-guns and an heavy 75mm cannon inside which made it a real "piece of flying artillery".

Detailed Plastic Kit of model
B-25G Mitchell
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002786
Product: 1:48 F-16A Fighting Falcon

Model Dim.: 31,5 cm

SUPER DECALS SHEET FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET

The F-16 Fighting Falcon, produced by the American company General Dynamics since the late '70s, is a real icon of the military aviation history. It was originally developed, according the United States Air Force need, to provide a modern and effective single-seat air superiority day fighter. However the project has progressively evolved and created an all-weather multirole aircraft able to have an extraordinary operational flexibility The F-16 is characterized by an original design easily recognizable by the frameless bubble canopy, which guarantees great visibility to the pilot. The F-16 adopted innovative solutions such as the side-mounted control stick, the "fly-by-wire" control system and modern avionics to enhance flight and combat performances. Appreciated by the pilots for its great manoeuvrability and reliability, the "Fighting Falcon" is armed with a 20mm M61 Vulcan internal cannon. Thanks to its hard points and location, it can mount a huge range of offensive weapons as missiles and bombs. The F-16 has been adopted by a lot of air forces around
the World and used, often with great effectiveness, in several operational theatres.

Detailed Plastic Kit of model
F-4J Phantom IIF-16A Fighting Falcon
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002784
Product: 1:48 Arado Ar 196 A-5

Model Dim.: 22,9 cm

SUPER DECALS SHEET FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET

The Arado Ar 196 was the main embarked recognisance seaplane used by the Kriegsmarine during Second World War. Single engine with low wing monoplane had in the cockpit a two crew members seated in tandem: pilot and observatory – gunner. For its period, the Arado Ar 196 was an advanced modern aircraft. The radial 9 cylinders BMW 132 engine was capable to arrogate 960 HP. The airframe structure of the Arado was optimized for the embarked purposes on main Germans vessels and cruisers. It can be catapulted directly from the vessel and with its fuselage-wing hinges backwards folding wings system, it can be better stowed on board. The fame for the Arado Ar 196 if for being an embarked recognisance (the battle cruisers Scharnhost and Gneisenau had three of them on board while the more famous ship of the Kriegsmarine, the Bismark, had four Arado Ar 196) was used also in the role of cost shore reconnisance.

Detailed Plastic Kit of model
Arado Ar 196 A-5
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002783
Product: 1:48 Tornado GR.1/IDS - Gulf War

Model Dim.: 38,1 cm

SUPER DECAL SHEET

The multirole Tornado is a twin-engine combat aircraft with a variable-sweep wing. This kind of aircraft is the result of a joint development project carried out by British, German and Italian companies. Although during its lifetime it has been used for several purposes (ground attack, electronic combat/reconnaissance, interceptor), its main role has always been to perform low-altitude penetrating strike missions. Tornado can load and use a powerful and varied set of offensive weapons. Thanks to its two powerful afterburning turbofans, the Tornado can reach the max speed of Mach 2.2. The Tornado baptism of fire took place in 1991 during the Gulf War. More in detail, the air campaign of the Gulf War, in which the Italian Tornados IDS took part, began on 17th January. The goal of the aerial bombing campaign was the suppression of military targets and infrastructures.

Warning! Not suitable for children under 14 years.

Article number: 510002781
Product: 1:48 F-4J Phantom II

Model Dim.: 37,0 cm

SUPER DECALS SHEET
COLORED INSTRUCTION SHEET

Developed by the American aircraft company McDonnell Douglas, the F-4 Phantom II is a Tandem two-seat, all-weather, supersonic fighter-bomber. It entered service during the sixties and it is one of the most famous airplanes of the military aviation history. In the original project, it was specifically designed for U.S. Navy but it has been used by all U.S. forces and it obtained a significant commercial success around the World. The original version designed for the US Navy was further improved in 1966 with the production start-up of the Phantom F-4J, characterized by the adoption of new systems able to enhance the air-to-air and ground-attack combat capabilities.
The avionic was significantly improved and the innovative fire control system for look-down / shoot-down capability was adopted. Thanks to its two upgraded General Electric J-79-10 powerful jet-engines the Phantom was able to reach the top speed of 1,240 Knots. Speed, thrust and reliability were the Phantom II strengths able to successfully counterbalance the reduced maneuverability due to its big dimension.

Detailed Plastic Kit of model
F-4J Phantom II
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002779
Product: 1:48 Chinook HC.1 / CH-47D

Model Dim.: 34,0 cm

SUPER DECALS SHEET
COLORED INSTRUCTION SHEET
UPGRADED MOULD

The Boeing CH-47 Chinook is one of the most famous heavy-lift helicopters in Military Aviation History. Characteristic for its two engine tandem rotor configuration, one over the cabin and one in the tail section. It was specifically developed to meet the U.S. Army’s transportation needs and to replace the obsolete H-21. The CH-47 Chinook has been produced in several versions and it has been adopted by a lot of Countries all over the World. The British Royal Air Force has the largest Chinook fleet outside U.S.A. The Chinook has

Detailed Plastic Kit of model
Chinook HC.1 / CH-47D
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002776
Product: 1:48 HUS-1 Sea Horse / UH-34D

Model Dim.: 36,0 cm

SUPER DECALS FOR 5 VERSIONS - PHOTO-ETCHED FRET - COLOR INSTRUCTIONS SHEET

Derived from the illustrious anti-submarine helicopter HSS-1 "Seabat" which was produced by the American Company Sikorsky from the mid-1950s, came the HUS-1 Seahorse. Developed to perform a tactical transportation role, the helicopter, robust and reliable, was widely used from 1957 by the United States Marine Corps. It was able to transport 16 fully equipped soldiers or 1,300 kg of supplies and other materials. Due to ist Wright R-1820 Cyclone piston engine the Seahorse was able to attain a maximum speed of 200 Km / h. It was also deployed by the U.S. Army (designated H-34) in South East Asia in an armed close support role equipped with 7.62 M60 machine guns. The French Army developed another version during the Algerian War with heavier armaments that included three 12.7 mm Browning machine guns and a 20 mm MG151 gun.

Detailed plastic kit in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002770
Product: 1:48 F-4E Phantom II

Model Dim.: 40,0 cm

SUPER DECALS SHEET FOR 4 VERSIONS

Developed by the American aircraft company McDonnell Douglas the F-4 Phantom II is a tandem two-seat, all-weather, supersonic fighter-bomber. It entered service during the sixties and it is one of the most famous airplanes of the military aviation history. In the original project, it was specifically designed for U.S. Navy but it has been used by all U.S. forces and it obtained a significant commercial success around the World. The F-4E version, specifically developed for the U.S. Air Force, adopted a M61 Vulcan cannon in the nose and it could be armed, to perform air-superiority missions, with AIM-9 Sidewinder and AIM-9 Sparrow airto-air missiles. Thanks to its two General Electric J-79 powerful jet-engines, the F-4E was able to reach the top speed of 1,240 Knots. Speed, thrust and reliability were the Phantom II strengths able to successfully counterbalance the reduced maneuverability due to its big dimensions.

Detailed Plastic Kit of model
F-4E Phantom II
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002769
Product: 1:48 Ju 87 B-2/R-2 Stuka "Picchiatello"

Model Dim.: 22,9 cm

SUPER DECALS SHEET, PHOTO ETCHED PARTS AND
COLORED INSTRUCTION SHEET INCLUDED

The JU-87 dive bomber is certainly one of the most famous airplanes of World War II. This characteristic "inverted gull wing" aircraft became famous at the early stage of the war and it can be considered, together with the Wehrmacht Panzer Division, the symbol of the "Blitzkrieg". The Italian Regia Aeronautica requested to the German ally, before the beginning of the war, a specific supply of one hundred "Stuka" to equip its ground attack and dive bombing Squadrons. The first Ju-87B units arrived in the summer of 1940 and went to equip the 96º Gruppo Bombardamento a Tuffo. The Ju-87, either in the B2 version or in the extender range R2 version, equipped other
"Gruppi di Volo" for a total of 150 planes. The Italian "Stuka", nicknamed "Picchiatello", was used by Regia Aeronautica over Malta, in North Africa, in the Balkans and in the Mediterranean Theatre.

Detailed Plastic Kit of model
Ju 87 B-2/R-2 Stuka "Picchiatello" Regia Aeronautica
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002768
Product: 1:48 Hurricane MK.I

Model Dim.: 20,5 cm

SUPER DECALS SHEET FOR 6 VERSIONS

The Hawker Hurricane has been the most widely used fighter by the British Royal Air Force at the beginning of World War II. The Hurricane was powered by a Rolls-Royce Merlin 12-cylinders, liquid-cooled, with more than 1,000 HP. The eight 7.7 mm Browning machine guns, which equipped it, guaranteed a good firepower. Although it was slower and more antiquated, for aerodynamic design, then the famous "colleague" with whom it shared the operational Engagement during the Battle of Britain, however, was more robust, cheaper and easier to maintain and repair. On June 1940 the first Hurricane Mk I "Tropical" version, characterized by the adoption of theVokes air filter, appeared. Several Hurricanes has been deployed in Malta and in North Africa.

Detailed Plastic Kit of model
Hurricane MK.I
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002766
Product: 1:48 TORNADO IDS 60° Anniv. 311GV RSV

Model Dim.: 38,1 cm

SUPER DECAL SHEET - COLOR INSTRUCTION SHEET

The first November 1956 the Reparto Sperimentale Volo flight group of the Italian Air Force was born. The department was soon identified by the number 311 that is still present nowadays on the planes. To celebrate the sixty years of activities a dedicated commemorative livery has been developed and adopted on a Tornado IDS. It has been used during the commemorative event of' October 2016 ant it has generated a great interest and an impressive success. Today the "311" flight group is one of the most advanced aeronautical testing and experimental centres in the World and it is formed by highly trained and skilled personnel. The Tornado IDS, was developed by a partnership program, during the '70s, between Italy, Britain and Germany to develop a modern multi-role combat aircraft air attack. With almost 1,000 units produced, the Tornado is a milestone of the military aviation.

Detailed Plastic Kit of model
TORNADO IDS 60° Anniv. 311GV RSV Special Colors
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002764
Product: 1/48 CA. 172 Skyhawk II

Model Dim.: 17,2 cm

SUPER DECALS SHEET
Decals for 3 versions

The single-engine fixed-wing Cessna 172 Skyhawk is a real milestone of the civil and commercial aviation history. It has been developed during the ‘50s and it is characterized either for its extraordinary longevity or for the incredible commercial success with more than 43,000 units produced. The "Skyhawk" is a single-engine four-seater high-wing plane and is used both as light commercial aircraft and as training plane. Characterized by its simple design based on the high wing and the frontal tricycle landing gear, it is able to reach the cruiser speed of 230 Km/h and to carry on board one pilot and three passengers A curiosity: on May 1987 the Skyhawk has ben used by a young German pilot to fly an unauthorized flight from Helsinki through Soviet airspace and to land close to Red Square in Moscow.

Detailed Plastic Kit of model
CA. 172 Skyhawk II
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002756
Product: 1/48 F7F-3 Tigercat

Model Dim.: 23,6 cm

SUPER DECALS SHEET FOR 6 VERSIONS

The F7F Tigercat is a heavy fighter developed by Grumman at the End of the Second World War but it was delivered too late to participate to the fighting. The F7F participated, in an active way, to the first stages of Korean War and it served with the United States Navy and with the Unites States Marine Corps. Designed for service on aircraft carriers it has been mainly used as land-based airplane. During the Korean War it had performed night fighter, attack, close support and photo-reconnaissance duties. Characterized by the adoption of two powerful radial Pratt & Whitney engines, the Tigercat was able to reach the speed of 740 Km/h. Furthermore it has been equipped with APS-6 radar system to optimize the effectiveness in night operations.

Warning! Not suitable for children under 14 years.

Article number: 510002746
Product: 1:48 Hercules C-130J C5

Model Dim.: 62,1 cm

SUPER DECALS SHEET FOR 4 VERSIONS

While it maintains the familiar lines of the Hercules, a common sight in the world’s skies for decades now, the C-130J has been extensively re-designed. The most visible change lies in the use of two 4700 HP Rolls-Royce (Allison) AE2100D3 engines, with six-blade composite-material propellers that ensure silent running and low fuel consumption. High performance features include an excellent rate of climb and an extended range of action thanks to the new engines.
An equally important development is the avionics: the cockpit, in fact, is equipped with new digital instruments and a Head-Up Display that provides the pilot with a constant stream of data without him having to look away from the cockpit window. The C-130J is steadily becoming the standard transport aircraft in many NATO countries, Italy included.

Warning! Not suitable for children under 14 years.

Article number: 510002736
Product: 1/48 HARVARD Mk.IIA

Model Dim.: 18,4 cm

SUPER DECALS SHEET

Harvard is the name assigned to the North American T-6 Texan aircraft used by the Air Force in the British Commonwealth. It was also produced under license in Canada. The Harvard was a low-wing single engine advanced trainer aircraft used to train pilots and make them ready for combat. Thanks to its Pratt & Whitney R-1340 Wasp 600 hp radial engine, it was able to reach the speed of 335 km / h. The project was developed in the mid-'30s and it became one of the most popular trainer aircraft in aviation history by contributing to the training of a large number of military pilots. Outside of the United States, the British RAF was the most prominent user.
However, by the end of World War II, the Harvard had an impressive spread and was used by the air forces of several Countries including Canada, Italy, Belgium and Netherlands . In some conflicts it was also used for air strike and close support operations.

Warning! Not suitable for children under 14 years.

Article number: 510002733
Product: 1:48 H-21C Shawnee "Flying Banana"

Model Dim.: 33,3 cm

100% NEW MOULDS - SUPER DECAL SHEET - PHOTO ETCHED PARTS - COLOURED INSTRUCTION SHEET

The H-21 Shawnee is known for its nickname "flying banana" which derives from the particular upward angle of the aft fuselage. The fuselage designed, in this original way, has been developed to permit the adoption of the two powerful tandem rotors and the oversized propellers. Thanks to the two rotors and the strong aerodynamic structure, the H-21 became a real and reliable "workhorse" able to successfully perform the most demanding transport tasks in any kind of environments. Widely used by the United States Army since the first half of the 50s, it was also deployed in the Vietnamese operation theater for use in transporting troops and tactical supplies since 1961. To increase the defensive capability the H-21 was often armed of mobile machine guns to the side doors. It was gradually replaced by the more modern UH-1 and CH-47.

Detailed Plastic Kit of model
H-21C Shawnee "Flying Banana"
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002725
Product: 1:48 A-10C "Blacksnakes"

Model Dim.: 33,8 cm

SUPER DECALS SHEET
Decals for 3 versions

This large twin-engine plane was built for the U.S. Air Force for troop support and anti-tank missions. Despite its extensive amour and armament the A-10 is highly maneuverable which is particularly important to overcome enemy anti-aircraft fire. The Thunderbolt (also called "Warthog") was practically built around its remarkable 30 mm gun GAU-8, which can perforate tank amour with its special high performance ammunition. The aircraft was widely used during the Gulf War, where it successfully destroyed a few hundred Iraqis vehicles with minimum losses despite the heavy enemy defense of conventional and missile fire power. A.10 Around the mid-2000s, the A-10, updated to "C" standard, has been improved to be in line with the changed and evolved operational needs. The A-10C is, in fact, the most modern version of the robust and reliable strike aircraft able to use the most advanced weapon systems and target acquisition pods.

Warning! Not suitable for children under 14 years.

Article number: 510002716
Product: 1/48 EA-18G Growler

Model Dim.: 38,1 cm

UPGRADE MOULDS SUPER DECALS SHEET
Decals for 4 versions

The Boeing E/A-18 G Growler was designed to satisfy a specific U.S. Navy need : have a specialized carrier-based electronic warfare aircraft to replace the not more updated Grumman EA-6B Prowler. The Growler is directly derived from the tandem-seat fighter F/A-18 F Super Hornet which keeps all main aerodynamic characteristics. Thanks to the General Electric engines the Growler is able to reach a maximum speed of mach 1.8, and its flight performance is similar to that of the main carrier-based aircrafts. The crew consists of the pilot and, in tandem, the WSO (Weapon System Officer). Instead of 20 mm cannon of F/A-18, the Growler is mounted dedicated electronic warfare equipment. Furthermore, in its hard points, the Growler is able to carry additional high and low band jamming pods, additional fuel tanks and AIM-120 AMRAAM missiles.

Warning! Not suitable for children under 14 years.

Article number: 510002706
Product: 1/48 UH-60A Black Hawk Night Raid

Model Dim.: 31,7 cm

Decals for 2 versions

The Black Hawk is the Army’s front-line utility helicopter used for air assault, air cavalry and aeromedicals evacuation units. It is designed to carry 11 combat-loaded air assault troops and it is capable of moving a 105 mm. Howitzer and 30 rounds of ammunition. First deployed in 1978, the Black Hawk’s advanced technology makes it easy to maintain in the field. The Black Hawk has performed admirably in a variety of missions, including air assault, air cavalry and aeromedicals evacuations, including Operation Enduring Freedom in Afghanistan and Operation Iraqi Freedom in Iraq. In addition, modified Black Hawks operate as special operations platforms.

Warning! Not suitable for children under 14 years.

Article number: 510002692
Product: 1:48 AB 212 /UH 1N

Model Dim.: 36 cm

Decals for 3 versions

The UH-1N was developed from a project of the US based Bell Helicopter company at the end of the 60s. In Italy, a similar version is produced on license by Agusta Westland under the designation AB-212. The AB-212 is a medium, two-blade rotor powered by two Pratt & Whitney PT6T turbo shaft power turbines providing 1.342 Kw. It is a development of model 205, the main difference being an elongated fuselage. In the first half of the 2000s, the AB 212 was massively updated to enhance its operational capacity. It has been fitted with two 7,62mm swivelling machine guns on the tailgates, and the defensive equipment has been upgraded with antimissile flare launchers and additional ceramic and kevlar armour to protect the crew. Italian AB 212s with this upgraded configuration are employed since 2006 in Afghanistan, in the International Security Assistance Force mission.

Warning! Not suitable for children under 14 years.

Article number: 510002671
Product: 1:48 A-4E/F SKYHAWK

Model Dim.: 26,5 cm

SUPER DECALS SHEET FOR 4 VERSIONS

The Douglas A-4 Skyhawk was developed in the 1950s and was one of the most famous light attack aircraft in the aviation history. Its small and compact dimensions made it extremely maneuverable and ideal for use on the aircraft carriers. It was characterized by the low-mounted delta wing solution, the two small air intakes on the fuselage sides, and the adoption of the single Pratt & Whitney J52 turbojet engine. It was armed with two 20 mm. guns and, thanks to its hard Points under the wings and under the fuselage the Skyhawk was able to support a wide variety of air-to-air missiles, air-to-surface missiles, rockets and bombs. Thanks to its operational capabilities, the A-4 scored a good commercial success and has been adopted by several air arms around the world. In addition to United States, it was used, among others, by Australia, New Zealand, Kuwait and Israel.

Detailed Plastic Kit of model
A-4E/F SKYHAWK
in scale 1:48

Warning! Not suitable for children under 14 years.

Article number: 510002668
Product: 1/48 TORNADO IDS Black Panthers

Model Dim.: 38,1 cm

Decals for 3 versions

The Tornado was the result of a collaborative project between three countries (the UK, Germany, and Italy) aimed at developing a bomber able to operate in TFR (terrain following radar) mode, flying at low level over uneven terrain. Despite a series of problems that were more political than technical, which delayed its deployment, almost 1000 Tornado IDS planes were built and it turned out to be an excellent machine in action, both during the Gulf War and in the operations in the former Yugoslavia. Today, about 750 Tornado IDSs remain in service with the nations of the consortium that built them and with Saudi Arabia.

Article number: 510002667
Product: 1/48 F-14A TOMCAT

Model Dim.: 39 cm
Decals for one version

The U.S. Navys first super-fighter, the F-14, was developed partially on the basis of experience gained with the F-111, a multi-role plane designed by General Dynamics, the Navy version of which, the F111B, was built by Grumman. The F-14A first flew on 21st December 1970, and production-line models started reaching squadrons in 1973. Squadrons VF-1 and VF-2 accompanied the last voyage of the aircraft carrier Enterprise in Vietnam, yet never saw combat. The Tomcat would not see action until 1981, when it shot down two Libyan Su-22s during an encounter over the Gulf of Sirte. Since then the F-14 has been updated several times and has taken parts in various conflicts in the Middle East (Iran-Iraq war, 1st and 2nd Gulf War), as well as in operations over the former Yugoslavia and minor skirmishes over the Mediterranean.

Article number: 510002666
Product: 1:48 MH-60K Blackhawk SOA

Model Dim.: 32 cm

The Black Hawk is the Armys front-line utility helicopter used for air assault, air cavalry and aeromedicals evacuation units.

Warning! Not suitable for children under 14 years.

Article number: 510002638
Product: 1/48 JAS 39 A GRIPEN

Model Dim.: 30 cm
Decals for 2 versions

The Gripen is the standard fighter-bomber of the modern-day Swedish Air Force, where it came into service just a few years ago. Extremely manoeuvrable and compact, its sophisticated electronics provide it with all-weather, night-time flight capabilities. The aircraft can be fitted with an array of the latest air-air and air-surface weapons.

Warning! Not suitable for children under 14 years.

The model IT V-22 OSPREY Tilt Rotor in scale 1/48 has a length of about 289 mm.

Decals for one version

The V-22 Osprey convertoplane is now being distributed to evaluation divisions of the US Navy and Marines to define piloting and use methods for this new, revolutionary aircraft. Thanks to its large, swing-rotors, the Osprey is able to take off and land just like a helicopter. Once off the ground, thanks to the rotation of its engines, it flies like a normal plane, reaching the speed and range hitherto unheard of for a traditional "chopper". The V-22 is set to replace the old CH-46s as a transport and assault aircraft for the Marines, and in future, it will be used for the Special Forces’ aviation too.

Warning! Not suitable for children under 14 years.

Detailed Plastic Kit of model
F-104G/S - RF-104G Starfighter - Upgraded Edition
with Pod Orpheus
in scale 1:32

Warning! Not suitable for children under 14 years.

Article number: 510002510
Product: 1/32 Mirage III E/R

Model Dim.: 24,5 cm

NEW MOULDS
SUPER DECALS SHEET + PHOTO ETCHED PARTS+ COLOURED INSTRUCTION SHEET INCLUDED

The Dassault Mirage III is a reference point of the French aircraft production. It has been produced from the early sixties to provide to Armée de l’Air, the French Air Force, a reliable and effective fighter aircraft. The Mirage III rapidly became a commercial success and it was widely exported to several Countries taking part to a lot of conflicts between the seventies and the eighties. Characterised by the delta wing design without horizontal tail plane, thanks to its Snecma Atar afterburning turbojet, it was able to exceed the speed of Mach. After the introduction of the single-seat interceptor Mirage IIIC, a new multirole and strike version has been implemented. The Mirage IIIE was born and it has been a successful version produced in a significant number of units. It was characterised by a forward fuselage extension to permit the installation of the new avionic system. From the same airframe, including the fitting of cameras in the nose, Dassault has also been developed the reconnaissance variant designed as Mirage IIIR.

Detailed Plastic Kit of model
Mirage III E/R
in scale 1:32

Warning! Not suitable for children under 14 years.

Article number: 510002509
Product: 1:32 TF-104G

Model Dim.: 52,0 cm

FULLY UPGRADED MOULDS

FINELY ENGRAVED RECESSED PANEL LINES AND RIVETS - FULLY DETAILED ENGINE , COCKPIT , AND AVIONICS BAY - OPEN OR CLOSED AIR BRAKES - 2 HUGE DECALS SHEETS FOR 8 VERSIONS - INSTUCTIONS SHEET WITH COLOR PROFILES (8x4 plates) - 390 PARTS (343 PLASTIC PARTS, 47 PHOTO-ETCHED PARTS)

The Lockheed F-104 Starfighter is one of the most famous fighters in the history of aviation and also one with the longest operational life: its history began at the end of the 50s and ended, for some air forces, in mid 2000s. From its unique aerodynamic design, characterized by slender fuselage and very little wing surface, was developed the combat-capable two-seat advanced trainer version TF-104. Among the most widespread version, the TF-104G, produced by Lockheed was a fundamental training step for all the combat pilots before to seat in the F-104G or F-104S single-seat fighter version cockpits. Compared to the single-seat, the TF-104G didn’t have the 20 mm gun and the centerline pylon but, thanks to the General Electric J79 turbojet engine, the pilot and the Trainer could have the same flight experience and performance of the fighter version. A lot of N.A.T.O. air forces used the TF-104G to perform training duties as Belgium, Holland, Norway, Spain, Turkey, Germany and Italy.

Deatailed plastic kit of model
TF-104G
in scale 1:32

Warning! Not suitable for children under 14 years.

Article number: 510002506
Product: 1:32 Lockheed F-35A Lighting II

Model Dim.: 49,0 cm

100% NEW MOULD - SUPER DECALS SHEET FOR 6 VERSIONS - PHOTO ETCHED PARTS -
COLOURED INSTRUCTION SHEET AND NEW STICKERS MASKS SHEET

The JSF Joint Strike Fighter program was set up to develop a new fifth-generation all-weather multirole combat aircraft a ble to replace the existing United States and NATO strike-fighters. The aerospace industry team led by Lockheed Martin generated the single-seat, single-engine, F-35 Lightning II. It adopts stealth technology and it is characterized by the trapezoidal wings and by the use of the most advanced hi-tech materials and avionic systems. Developed to perform air superiority, close air support and ground attack missions, it has been design in different configurations. The F-35A is the conventional takeoff and landing variant, the F-35B is the short takeoff and vertical landing variant and the F-35C, with foldable-wings, has been developed to be used from conventional deck carriers. Thanks to its operational flexibility, the advanced on-board technology and the impressive project innovation, the F-35 lightning II will be a reference aircraft in the twenty-first century military aviation.

Deatailed plastic kit of model
Lockheed F-35A Lighting II
in scale 1:32

Warning! Not suitable for children under 14 years.

Article number: 510002505
Product: 1/32 Mirage III C

Model Dim.: 43,6 cm

100% NEW MOULDS - SUPER DECALS SHEETS FOR 6 VERSIONS - COLOR INSTRUCTIONS SHEET - PHOTO ETCHED FRET INCLUDED

The Dassault Mirage III is a reference point of the French aircraft production. It has been produced from the early sixties to provide to Armée de l’Air, the French Air Force, a reliable and effective fighter aircraft. The Mirage III rapidly became a commercial success and it was widely exported to several Countries taking part to a lot of conflicts between the seventies and the eighties. Characterised by the delta wing design without horizontal tail plane, thanks to its Snecma Atar afterburning turbojet, it was able to exceed the speed of Mach 2. The Mirage IIIC, in particular, was the single-seat interceptor versions, and it has been configured to perform air-superiority tasks. It was armed with two 30 mm DEFA cannons, under the cabin, and with store pylons able to carry IR air-to-air missiles, as AIM-9 Sidewinder or Matra Magic, and Radar Guided Missiles.

Deatailed plastic kit of model
Mirage
in scale 1:32

Article number: 510001437
Product: 1:72 Fiat CR.42 Falco

Model Dim.: 11,5 cm

SUPER DECALS SHEET

Starting from the C.R. 32 "Freccia" success proved by a great reliability and operational efficiency during the Spanish Civil War, the
italian manufacturer Fiat developed, in the late ‘30s, the new C.R. 42 "Falco". The new biplane single-seat fighter had - as its predecessor - the fixed landing gear and the open cabin but was equipped with important innovations such as the alloy and steel frame covered by canvass and metal paneling. Thanks to Its supercharged air-cooled Fiat A.74 radial engine the Fiat C.R. 42 was able to reach 400 Km / h. It had an extraordinary maneuverability, much appreciated by the Italian pilots, but suffered the "biplane " configuration limits. It was able to successful engage the Gloster Gladiators, but it was soon outclassed by faster and heavily armed monoplanes as the Hawker Hurricane and the Supermarine Spitfire. Several Fiat C.R. 42, together with G.50 fighters and BR.20, CANT Z 1007 bombers has been used by the Italian Regia Aeronautica during the Battle of Britain within the "Corpo Aereo Italiano".

Detailed plastic kit in scale 1:72

Warning! Not suitable for children under 14 years.

Article number: 510001436
Product: 1:72 Heinkel HE-111H-6

Model Dim.: 22,7 cm

SUPER DECALS FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET
The medium bomber Heinkel He-111 formed the backbone of the Luftwaffe bomber squadrons during the early stages of the Second World War. It was characterized by the adoption of two engines, like many other aircraft with similar features of the time, but also by the introduction of innovative solutions such as the all-metal frames. Thanks to its two Jumo 211 engines, it was able to reach the maximum speed of 440 km / h and it could load up to 2,000 kg of bombs in the internal loading bay. Easy to identify due to the distinctive fully glazed nose, the wing and rudders profiles, the He-111 was widely used by Luftwaffe during the Battle of Britain in 1940. During the years it was constantly improved and upgraded but became obsolete during the latter part of the war.

Detailed plastic kit in scale 1:72

Article number: 510001435
Product: 1:72 HARRIER GR.1 Transatlantic Air Race

Length of the model 193 mm

SPECIAL EDITION -EXTRA CATALOGUE

The Harrier is probably the most famous aircraft with vertical/short takeoff and landing capabilities of military History. Designed and developed by the British manufacturer Hawker Siddeley in the sixties, it was largely used, in its various versions, by British Royal Air Force and Royal Navy. The United State Marine Corps showed a significant interest in the aircraft that could be the ideal answer the operating needs. The single-seat AV-8A was specifically developed for the USMC and entered service in 1971, in the Marines’ attack squadrons. The AV-8A was able to operate from the ground bases and from the converted amphibious assault ships. The AV-8A could successfully perform close support, ground attack and air defense duties. It was very appreciated by USMC in fact the AV-8A was fully integrated with the other landing vehicles and helicopters during the Amphibious assault operations.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510001434
Product: 1:72 Mc Donnell-Douglas Phantom FG.1

Model Dim.: 26,7 cm

SUPER DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET

Developed by the American aircraft company McDonnell Douglas, the F-4 Phantom II is a tandem two-seat, allweather, supersonic fighter-bomber. It entered service during the sixties and it is one of the most famous airplanes of the military aviation history. From the ‘60s to the ‘80s it was widely used by the United Kingdom and was produced, in numerous dedicated versions, to serve both the Royal Navy and the Royal Air Force performing air defense, close support, ground attack and reconnaissance tasks. The Royal Navy started to use the Phantom in 1964 to replace the obsolete Sea Vixen with the specific duty to guarantee the fleet air defense and with the intention to have the capability to operate from the decks of the British aircraft carriers. Very similar to the versions produced in the United States, the Phantom FG.1 and FGR.2, produced in Great Britain, were characterized by the adoption of Rolls-Royce "Spey" engines instead of the American GE J79.

Article number: 510001433
Product: 1:72 SH-3 Sea King "APOLLO"RECOVERY"

Length of the model 307 mm
SUPER DECALS SHEET

The twin-engine helicopter SH-3 Sea King, developed and produced by the American company Sikorsky Aircraft, entered service in the ‘60s and it was widely used for years by the U.S. Navy to carry out numerous tasks and operational activities. It’s main role of Anti-submariner warfare (ASW) helicopter was flanked by transportation and Search and Rescue (SAR) missions. Thanks to its design based on a sturdy structure, the folding main rotor blades and the tail section, the Sea King was the ideal solution to be used in naval-orientated operations and to be used on-board of the U.S. Navy ships. Furthermore the Sea King was the first helicopter to have amphibious capabilities. It could load a wide variety of armament as torpedoes, depth charges and anti-ship missiles. The SH-3 Sea King was also produced under license in Japan, in United Kingdom and in Italy.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510001430
Product: 1:72 Fokker F-27-400 "Friendship"

Length of the model 356 mm

SUPER DECAL SHEET

The twin-engine Fokker F-27 Friendship was developed during the fifties by the Dutch airplanes manufacturer to provide a valid successor to the old traditional piston engine Douglas DC-3 in service since the World War II. The Fokker F-27 immediately achieved a good commercial success in civil and military uses and it was even produced under licence in the United States. Thanks to its two 2,250 Hp Rolls-Royce turboprop engines the Fokker was able to reach the max speed of 460 Km/h. Since its start of production it was adopted by a lot of airlines that found in it the best solution for short-haul routes. The adoption of two turboprop engines, compared to traditional piston engines, reduced vibrations and provided an improved comfort on board. The plane was very versatile and was widely used for freight transport activities, troop transport duties and maritime patrol.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510001429
Product: 1:72 F/A-18 Hornet Swiss AirForce - RAAF

Length of the model 237 mm

NEW DECALS SHEET

The twin-engine supersonic multirole fighter F/A-18 Hornet has been developed to offer an extraordinary flexibility and versatility. It can perform air superiority, ground attack, close support and reconnaissance duties. Thanks to its flexibility, the F/A-18 has been adopted by several Air Forces becoming a relevant commercial success. It is used, in its various configurations, by US Navy, US Marine Corps, Australian, Canadian, Spanish and Swiss Air Forces. More in detail, 26 single seater F/A-18 and 7 twin seater, equipping 3 squadrons, are currently used by Swiss Air Force.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510001427
Product: 1:72 MiG-21 Bis

SUPER DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET

The Soviet fighter Mikoyan-Gurevich Mig-21 is the most widely produced supersonic jet aircraft in aviation history. Commonly known as ‘Fishbed’, the aircraft was a mid-1950’s aeronautical project which in its design followed the natural evolution of arrowwing fighters. The delta wing, shape, high speed, the tremendous manoeuvrability, the
weapons variety and its load capacity, had been the principal factors of its commercial success. In fact, the Mig-21 routinely equipped the fighter squadrons of the Soviet Union and the then Warsaw Pact countries. Beyond Europe the fighter was also widely acquired and operated by global allies of the Soviet Union over a period of many years. The Mig-21 ‘Bis’ version was one of the most technically advanced of its type. Thanks to its powerful Tumansky jet engine the ‘Fishbed’ was able to attain a maximum speed of 2.100 Km/h. Its principal armament was a 23 mm cannon and four underwing areas to load a wide array of further weaponry. The Mig-21’s operational life has been very extensive covering conflicts from the 1960’s through to the 1990’s.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510001426
Product: 1:72 F-86 F "Sabre"

Model Dim.: 15,9 cm

SUPER DECALS SHEET

The single-engine jet fighter F-86 Sabre was developed by the American aircraft company North American in the late 1940s and became a symbol of post-war military aviation. The F-86 featured the adoption of the typical swept-wing, the large front air intake and the use of the General-Electric J47 jet engine. The fighter flight performance was impressive for the time and very different from the propeller-driven fighters. The Sabre was armed with six M3 12.7 mm. Browning machine guns installed in the nose. It was widely used by the U.S.A.F. and it played a key role during the Korean War where it could counter the Soviet fighter Mikoyan-Gurevich Mig15, in the first high-speed jet planes dogfights in the history.

Detailed Plastic Kit

Warning! Not suitable for children under 14 years.

Article number: 510001425
Product: 1:72 F-35B Lightning II V/STOL Vers.

Model Dim.: 21,7 cm

100% NEW MOULDS - SUPER DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET - U.S. VERSION ''Beast mode'' EXTERNAL ARMAMENT SET INCLUDED

The JSF Joint Strike Fighter program was a developmental project to create a new 5th generation all-weather multirole combat aircraft to replace the existing American and NATO strike-fighter force. The aerospace industry team led by aircraft manufacturer Lockheed Martin, created the single-seat, single-engine F-35 Lightning II. This fighter employs stealth technology and is characterized by its trapezoidal wings and application of the most advanced hi-tech systems, materials and avionics. Designed to attain air superiority, provide close air support and undertake ground attack missions, it has been developed in differing configurations for its varying roles. The F-35B with its STOVL (Short Take Off and Vertical Landing) capability has been specifically designed to operate from modern aircraft carriers such as the British H.M.S. Queen Elizabeth or the Cavour, the flagship of the Italian Navy. The U.S Marines Corps plan to deploy the F-35B in both attack and ground support roles. The STOVL version is powered by the Pratt & Whitney afterburning turbofan and its swivel nozzle, which directs the thrust of the engine. Due in part to its operational flexibility, its advanced on-board technology, innovative design and performance features, the F-35 Lightning II is already a landmark aircraft in the world of 21st century military aviation.

Detailed Plastic Kit

Article number: 510001422
Product: 1:72 US NF F-14A vs A-4F

Model Dim.: 26,52cm - 16,97 cm

CONTAINS 2 MODELS - COLORS INSTRUCTIONS SHEET


The American supersonic twin-engine Grumman F-14 Tomcat was the icon of the U.S. Navy fighter squadrons during the ‘80s and ‘90s. it was characterized by the adoption of the variable-sweep wing, the twin-tail and the tandem two-seat cabin. The "Tomcat" provided an impressive operational performance. Thanks to its two General Electric Afterburning turbofans it was able to reach the max speed of Mach 2.34. It was armed with a 20 mm M61 Vulcan rotating gun and it could use, in addition to the more conventional AIM-9 Sidewinder and AIM-7 Sparrow, the AIM-54 Phoenix radar-guided long-range missiles. The best pilots of the U.S. Navy Fighter Squadrons took part in combat training courses at the famous Fighter Weapon School better known as "Top Gun". The F-14 pilots could improve their combat skills and capability on the F-14 confronting against A-4 Skyhawk and F-5 Tiger II used by the school to simulate the flying characteristics of the Soviet Mig.

Detailed Plastic Kit of model
US NF F-14A vs A-4F
in scale 1:72

Warning! Not suitable for children under 14 years.

Article number: 510001421
Product: 1:72 X-47B

Model Dim.: 26,2 cm - 16,1 cm

COLORS INSTRUCTIONS SHEET

The Northrop Grumman X-47B is an demonstration unmanned combat air vehicle (UCAV) expressly designed and developed to operate from the flight decks of the US Navy aircraft carriers. The X-47B flew for the first time in 2011 and has performed, in the following years, several operational tests completed in 2015. The X-47B was used in the test cycles on board the U.S.S aircraft carrier George H.W. Bush (CVN-77) and it performed take-off, landing, air-refueling duties. To optimize the on board capability the X-47B is equipped with folding wings in order to minimize the space on the over crowded flight decks of the aircraft carriers. It is equipped with a Pratt & Whitney turbofan engine that guarantees subsonic performance and in its two loading bays it can provide an offensive load of over 2,000 kg.

Warning! Not suitable for children under 14 years.

Article number: 510001420
Product: 1:72 F-5E Swiss Air Force

Model Dim.: 20,0 cm

EXTRA CATALOGUE
COLORS INSTRUCTIONS SHEET - SUPER DECALS SHEET FOR 3 VERSIONS

Developed in the early seventies from the American company Northrop, as direct evolution of its predecessor, the F-5E Tiger II was characterized by an increased power, a better maneuverability and better air-to-air performance. Its real strength, however, was represented by the low production and maintenance costs compared to a good combat effectiveness. Thanks to its cost / performance ratio the F-5E was chosen to equip the fighter squadrons of several air forces. Among these countries, the Swiss Air Force considered the F-5E suitable to meet the real unique features of which the Alpine Country needed. It was also produced under license by the Helvetic country. The F-5 Tiger II is armed with two 20 mm. guns installed in the nose and it can use a wide variety of offensive load on its hardpoints.

Detailed Plastic Kit of model
F-5E Swiss Air Force
in scale 1:72

Warning! Not suitable for children under 14 years.

Article number: 510001419
Product: 1:72 Joint Strike Fighter (JSF) Programm

TWO MODELS INCLUDED


Length of the model 167 mm > X-32; < 196 mm > X-35B

During the ‘90s the United States Department of Defense launched the JSF (Joint Strike Fighter) contest to assign the production of a new 5th generation Multi-role combat aircraft. Boeing participated to the contest with the concept demonstrator aircraft X-32 while Lockheed Martin presented its XF-35 prototype. The Boeing X-32 was developed and realized around a large one piece carbon fiber composite delta wing and characterized by the big size air intake placed under the cockpit. The Lockheed Martin reply was based on the XF-35, using a lot of technology and aerodynamic solutions already successfully adopted on the fighter F-22 Raptor. For both concept
demonstrator aircrafts were developed several applications as the conventional take-off / landing version and the STOVL (short take-off and vertical landing) version. On 2001 the Department of Defense announced that the Lockheed Martin X-35 won the JSF competition and from it the new F-35 Lightning II was born.

Detailed Plastic Kit of model
Joint Strike Fighter (JSF) Programm X-32 and X-35B
in scale 1:72

Warning! Not suitable for children under 14 years.

Article number: 510001418
Product: 1:72 MB 339A P.A.N 2018 Livery A.M.I.

Model Dim.: 15,3 cm

SUPER DECALS SHEET FOR ALL TEAM PLANES

The 313th Gruppo Addestramento Acrobatico of the Italian Air Force, better known as Pattuglia Acrobatica Nazionale "Frecce Tricolori", is based at the airport of Rivolto, in the northern part of Italy. The "313th" was officially born in 1961 as a very professional and highly specialized aerobatic unit with the purpose to represent, all over the World, the Italian Air Force. At the beginning the team has been equipped with the Canadair CL-13 "Sabre" and, after few years it has been replaced by the glorious Fiat G-91 PAN. Today the "Frecce Tricolori" flies the two-seat fighter-trainer Aermacchi MB 339A/PAN and it is the biggest aerobatic display team in the World, using 10 airplanes. The MB 339 is an advanced single-engine trainer characterized by the low unswept wing, the two small side air intakes and the tandem two-seats cabin. In the PAN configuration, it is equipped with the characteristic smoke generators to perform aerobatic shows.

Detailed Plastic Kit of model
MB 339A P.A.N 2018 Livery A.M.I.
in scale 1:72

Article number: 510001415
Product: 1:72 F-15C Eagle

Model Dim.: 27,0 cm

SUPER DECALS SHEET FOR 4 VERSIONS - COLOR INSTRUCTION SHEET

The Mc Donnel Douglas F-15 is an all-weather single seat American fighter, developed with the specific goal to gain and maintain air superiority. The F-15 Eagle has been designed during the ‘70s to provide to U.S. Air Force a modern and extremely high performance advanced fighter. The F-15C is representing the more modern version and it is nowadays largely used by U.S. Air Force, U.S. National Guard, and by the Air Forces of several Countries as Japan, Israel, and Saudi Arabia. The F-15 took part to the Gulf War in 1991 and it was able to guarantee the air superiority to Coalition Forces. It has been the most effective fighters with an impressive high number of enemy planes shot down. Armed with a 20mm. M61 gun it can use a wide variety of air-to-air missiles. Thanks to the two powerful Pratt & Whitney F-100 after-burring turbofans engines, the "Eagle" is able to reach the maximum speed of Mach 2.5.

Detailed Plastic Kit of model
F-15C Eagle
in scale 1:72

Warning! Not suitable for children under 14 years.

Article number: 510001414
Product: 1:72 F-14A Tomcat Recessed Line Panels

Model Dim.: 26,5 cm

From ESCI moulds
SUPER DECALS SHEET

The American supersonic twin-engine Grumman F-14 Tomcat was the icon of the U.S. Navy fighter squadrons during the ‘80s and ‘90s. it was characterized by the adoption of the variable-sweep wing, the twin-tail and the tandem two-seat cabin. The "Tomcat" provided an impressive operational performance. Thanks to its two General Electric Afterburning turbofans it was able to reach the max speed of Mach 2.34. It was armed with a 20 mm M61 Vulcan rotating gun and it could use, in addition to the more conventional AIM-9 Sidewinder and AIM-7 Sparrow, the AIM-54 Phoenix radar-guided long-range missiles. The F-14 entered in service during the ‘70s, replacing the F-4 Phantom II to perform air superiority duties. During its operational career it participated in a lot of military operations from the Gulf of Sirte crisis to the Iraq War.

Detailed Plastic Kit

Article number: 510001413
Product: 1:72 Sukhoi SU-27A Flanker

Model Dim.: 30,4 cm

SUPER DECALS SHEET FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET

The Sukhoi Su-27 is a twin-engine air superiority fighter aircraft entered in service in the second half of the ‘80s. It was developed during the '70s with a precise goal: to create a fighter able to successfully compete against the American F-14 and F-15 fighters. Furthermore the new fighter was set up to perform the important long range air defense role against the American B-1 and B-52 strategic bombers. It has been considered, since the beginning, one of the best fighters of the period. The Su-27 is characterized by a harmonious aerodynamic line and, despite its large size, the "Flanker" is extremely agile and maneuverable. Thanks to the two powerful NPO Saturn AL-31 turbofans, the Su-27 is able to reach the maximum speed of Mach 2.35. It is armed with a 30 mm gun and it can use a wide range of air-to-air weapons, such as R-27 and R-73 missiles, and air-to-surface bombs and rockets.

Detailed Plastic Kit of model
Sukhoi SU-27A Flanker
in scale 1:72

Warning! Not suitable for children under 14 years.

Article number: 510001411
Product: 1:72 A-7E Corsair II

Length of the model 195 mm

COLORS INSTRUCTIONS SHEET - SUPER DECALS SHEET FOR 4 VERSIONS

The LTV A-7 Corsair II was designed and implemented in the first half of the 1960s to satisfy the specific United States Navy request to have a new carrier-capable light attack aircraft able to replace the Douglas A-4 Skyhawk and the piston-powered Douglas A-1 Skyraider. It was directly developed by the fighter Vought F-8 Crusade airframe. The A-7 was characterised by the large frontal air intake under the cabin, by the 35° foldable swept wing to optimize the use and the storage on the aircraft carriers flight decks and by the adoption of a modern Head-up-Display to enhance the operational effectiveness. Thanks to its underwing hardpoints the A-7 was able to carry an impressive offensive load based on conventional bombs, guided bombs as the Paveway and air-to-surface missiles. The A-7E was the last version produced for the U.S Navy with an improved operational capabilities and the possibility to use the Harpoon anti-ship missiles and the AGM-88 HARM anti-radiation Missiles.

Detailed Plastic Kit of model
A-7E Corsair II
in scale 1:72

Warning! Not suitable for children under 14 years.