Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie der Verwendung von Cookies zu.
OK
 

Kits 1:35

1:35 Tiger I Mid-Production w/Zimmerit

Art.-Nr.: 500776888

1:35 Sd.Kfz.165 Hummel Early/Late Prod.

Art.-Nr.: 500776935

Art.Nr.: 500776935 Art.bezeichnung: 1:35 Sd.Kfz.165 Hummel Early/Late Prod.

Sd.Kz.165 Hummel's combat debut occurred during the titanic Battle of Kursk. Operated by a crew of six, the SPH carried 18 rounds for the main armament and more than 700 were built by the end of WWII. An easy identifying feature between Early- and Late-Production variants of the Hummel is the driver's/radio operator's compartment. On early vehicles, the driver received a small compartment that jutted out of the glacis plate. On later vehicles, this crew compartment was extended the full width of the hull to also enclose the radio operator.

This 2-in-1 kit, built precisely to 1/35 scale, allows modelers to create either an Early-Production or Late-Production Hummel. To account for the different production runs, there are two complete upper hulls as well as different drive sprockets, for example. Indeed, everything needed to produce an accurate variant is included in the box. The engineering is top notch too, with Razor Edge techniques utilized for the armored superstructure to produce a true-to-scale appearance. This allows interior fittings to be accurately sized and shaped. Furthermore, an aluminum gun barrel is offered for the 15cm gun. To cap it all off and leave modelers buzzing, the Hummel kit box top features one of Ron Volstad’s famous vintage illustrations of this SPH. The flight of the bumble bee has soared to new heights with this 2-in-1 offering!

Detaillierter Plastikmodellbausatz des Modells Sd.Kfz.165 Hummel Early/Late Production im Maßstab 1:35

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:35 Panther Ausf.F w/Night Sight

Art.-Nr.: 500776917

Art.Nr.: 500776917 Artikelbezeichnung: 1:35 Panther Ausf.F w/Night Sight

Some regard the Panther as Germany’s best tank of WWII, and approximately 6,000 Panthers were manufactured from 1943-45. However, the war ended before the planned ultimate Panther Ausf.F variant entered production. The main feature of the Ausf.F was a redesigned Schmaltürm "narrow turret" possessing a narrower frontage and thicker armor. The turret featured a modified 7.5cm gun known as the KwK.44/1 in a bell-shaped mantlet. The turret would also have had a built-in Zeiss stereoscopic rangefinder mounted in armored blisters either side of the turret.

If it had been built, the Panther F would have been a prime candidate to receive the FG1250 infrared sight, which Germany was trying out at the end of the war. German tanks were also very vulnerable to enemy fighters late in the war, so a special set of armored plates could be mounted atop the turret and over parts of the Panther’s engine deck. These steel plates that were 5-8mm thick were double-spaced on the turret top to improve protection against aircraft strafing and shrapnel. Dragon is now offering such a Panther Ausf.F with all the aforementioned accessories such as the night sights and the interesting set of add-on antiaircraft armor. The item utilizes Dragon’s previously released kit of a Panther Ausf.F tank but it comes with new infrared sights. The air defense armor plates are made of photo-etched parts, including the prominent double layer mounted atop the turret. The final result is a unique-looking Panther, this kit being perfect for a "what if" diorama or as a standalone item.

Detaillierter Plastikmodellbausatz des Modells Panther Ausf.F w/Night Sight and Air Defense Armor im Maßstab 1:35

1:35 Germ.Railway Gondola Typ Ommr w/2cm

Art.-Nr.: 500776912

1:35 DAK Pz.Bef.Wg.III Ausf.H (SmartKit)

Art.-Nr.: 500776901

Art.Nr.: 500776901 Artikelbezeichnung: 1:35 DAK Pz.Bef.Wg.III Ausf.H (SmartKit)

Dragon launched a 1/35 kit of a Panzerbefehlswagen III Ausf.H (Item No. 6844) last year, and while it was lapped up by modelers, there was also clamor for a Deutsches Afrikakorps (DAK) version of the same vehicle. Dragon has now obliged by creating a special DAK configuration of the Pz.Bef.Wg.III Ausf.H! This specialized command tank containing long-range radios was created based on a standard Ausf.H gun tank, the first Panzer III version to be fitted with a 5cm KwK L/42 cannon. However, on the Pz.Bef.Wg. version there was no 5cm gun fitted, with just a single MG34 for self-defense and a dummy gun to fool the enemy.

Dragon’s new 1/35 scale DAK kit is different to the preceding Pz.Bef.Wg.III Ausf.H kit in some noticeable ways. For example, it bears a large storage box on the engine deck, plus a smaller storage box on the front left of the fender. Another modification is a spare-track rack on the glacis plate. The sprockets and idler wheels are also different to that on the predecessor. And unchanged, is the characteristic large frame antenna for the long-range radio. Plus the vehicle looks most impressive when the turret-mounted telescopic antenna is shown extended. This Panzerbefehlswagen III H nicely complements lately-reproduced DAK items in Dragon’s line-up, including: Pz.Kpfw.I Ausf.A Early Production (Item No. 6289), Pz.Kpfw.III (5cm) Ausf.H Late Production (6642), Bison II 15cm s.IG.33 (6440), Kübelwagen Workshop w/DAK Troops (6338). With the arrival of this command tank, modelers now have even more options for creating a North African diorama.

Detailierter Plastikmodellbausatz des Modells 1:35 DAK Pz.Bef.Wg.III Ausf.H (Smart Kit) im Maßstab 1:35

1:35 Tiger I Early Production "TiKi"

Art.-Nr.: 500776885

Art.Nr.: 500776885 Artikelbezeichnung: 1:35 Tiger I Early Production "TiKi"

Dragon has already launched a number of impressive 1/35 scale kits depicting variants of the famous and formidable Tiger I tank used by Germany. The latest kit to hit shop shelves is a Tiger I Early-Production version representing the famous "TiKi" fielded by the Das Reich Division. This tank operated with 8./SS-Pz.Rgt.2. It is unclear what the name refers to, whether a girlfriend of a crewmember or a contraction of "Tiger Kind" (i.e. Tiger Child). This company was formed in November 1942 and its first mission was Kharkov. Decals for tank number ‘812’ are included, a number used until April 1943. "TiKi" was destroyed later that year after participating in the Battle of Kursk too.

The arrival of this 1/35 scale kit at the turn of the New Year is a nice surprise from Dragon, allowing modelers to create "TiKi" straight from the box. It's a long-waited normal Tiger I early production from Dragon."TiKi"from the Das Reich Division is very well known, so it’s convenient to have everything included all in one place. This new kit inherits existing components from other Tigers but, where necessary, new parts have been specifically created too. These include the gun mantlet, the storage bin on the back of the turret and the spare-track bracket. Some parts of its on-vehicle materiel are new too. To ease assembly, the tank includes convenient DS tracks as well. This is truly a masterpiece, with "TiKi" the Tiger ready to foray into the Russian city of Kharkov to do battle straight from the box.

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:35 Pz.Kpfw.III (3.7cm)(T) Ausf.F

Art.-Nr.: 500776877

Art.Nr.: 500776877 Artikelbezeichnung: 1:35 Pz.Kpfw.III (3.7cm)(T) Ausf.F

It was planned that Germany would conduct an amphibious invasion of Great Britain under the codename Operation Sea Lion (Seelöwe), and to this end a number of Panzer IIIs were especially converted into diving tanks. These were known as the Tauchpanzer III, and they had the ability to drive along the seafloor totally submerged thanks to a breathing apparatus. One variant prepared as a Tauchpanzer was the Panzer III Ausf.F, of which German industry produced 435 units between September 1939 and July 1940. They had a 3.7cm KwK L.46.5 main armament fitted in the turret.

Dragon’s newest 1/35 kit portrays just such a Tauchpanzer III Ausf.F made ready for Operation Seelöwe. This new kit comes with special enhancement for the benefit of modelers. There’s an accompanying two-figure combat camera team. These cameramen are in much demand because no other such cameraman figure combination exists in injection-molded plastic. The 1/35 scale tank comes with all necessary parts to make the diving tank, inlcuding waterproofing parts, floating snorkel buoy, depth marker, long rubber hose and etc. If modelers have never built a diving tnak before, now is the perfect time to get their feet wet!

- Floating snorkel buoy & long rubber hose accurately reproduced - Depth markers are reprdouced in full lenght - Commander's cupola with DS waterproof cover - Mantlet waterproof cover by DS materials - Waterproofing parts around turret bottom are truly depicted - Delicate hose racks are finely made - DS track link provided for easy assembly

Detaillierter Plastikmodellbausatz des Modells Pz.Kpfw.III (3.7cm)(T) Ausf.F "OPERATION SEELÖWE" im Maßstab 1:35

1:35 Pz.Kpfw.IV Ausf.D

Art.-Nr.: 500776873

Art.Nr.: 500776873 Artikelbezeichnung: 1:35 Pz.Kpfw.IV Ausf.D

Dragon offers a comprehensive lineup of 1/35 scale kits in the popular Panzer IV family tree, and the quality of kits available just continues to scale new heights! This is obvious with the newest member of the family – a Pz.Kpfw.IV Ausf.D. Production of the Ausf.D commenced in October 1939, with some 229 tanks produced altogether through till May 1941. Like its predecessors, the Ausf.D mounted a short-barreled 7.5cm KwK37 L/24 gun in the turret. Major improvements on this mark were thicker armor on the sides and rear (upgraded from 15mm to 20mm) and the fitting of an external mantlet. A hull machine gun was reintroduced in front of the radio operator. The tank weighed 20 tons and it was operated by a crew of five. This variant was widely used in Germany’s campaigns in France, the Balkans, North Africa and Russia.

Dragon has offered kits of the Ausf.D before, but this latest model is a brand new item that utilizes completely new toolings. Indeed, the only reused components on this 1/35 scale plastic kit are the on-vehicle tools, and the DS tracks that have been used on Dragon’s previous Panzer IVs. This completely refurbished tank thus gives modelers a Panzer IV D built to the very highest Smart Kit levels. Furthermore, the highly experienced design team has sought to minimize the number of parts wherever possible so that model-makers are spared the ardor of repetitive assembly. It goes without saying that they’ve done so without sacrificing any detail either. This kit fits together with ease, and it now offers even more assembly pleasure thanks to the clever engineering. Indeed, the early-war Panzer IV D has been given a new lease of life!

Detailierter Plastikmodellbausatz des Modells Pz.Kpfw.IV Ausf.D (Pz.IV Ausf.D has been given a new lease of life!) im Maßstab 1:35

1:35 IJA Type 97 Medium Tank "Chi-Ha"

Art.-Nr.: 500776870

Art.Nr.: 500776870 Artikelbezeichnung: 1:35 IJA Type 97 Medium Tank "Chi-Ha"

Dragon has previously released superb 1/35 scale plastic kits of Japanese armored and amphibious vehicles from WWII, including the Type 2 Ka-Mi, Type 95 Ha-Go and Type 4 Ke-Nu, but the time has finally come to unveil what was the most important tank type! It is the Type 97 Chi-Ha medium tank as used by the Imperial Japanese Army (IJA). The Type 97 was Japan’s most widely produced medium tank of WWII. Boasting a 57mm main gun and two Type 97 machine guns, this tank was intended to serve as an up-scaled version of the Type 95 for infantry support. A total of 2,123 tanks were produced from 1938-43, most of which had the low-velocity 57mm gun. The Chi-Ha was used in combat in Manchuria and China, as well as in fighting against the Allies.

The new 1/35 scale model specifically depicts an Early-Production variant of the Type 97 medium tank, possibly the most well-known Japanese tank of WWII. The kit was thoroughly researched by a Japanese design team, based on investigations and measurements of several surviving tanks. This level of research ensures that it will be undeniably the most accurate and precise Chi-Ha available on the market. The engine deck layout, toolbox, shovel, rear-plate brackets and distinctive flaps on the engine deck are all correctly depicted for an early-production tank. The kit resorts widely to slide molds so that fewer parts are needed. Naturally, this leads to a perfect balance of easy assembly and accuracy, which is what Smart Kits are all about! This Japanese tank kit allows modelers of 1/35 scale AFVs to field a tank widely used by the Japanese throughout the Asia-Pacific theater.

Detailierter Plastikmodellbausatz des Modells IJA Type 97 Medium Tank "Chi-Ha" Early Production im Maßstab 1:35

1:35 Pz.Kpfw.VI Ausf.E Tiger I Mid Prod.

Art.-Nr.: 500776866

Art.Nr.: 500776866 Artikelbezeichnung: 1:35 Pz.Kpfw.VI Ausf.E Tiger I Mid Prod.

Dragon has come up with extremely exciting combination for Item No. 6866. It features a Tiger I Mid-Production tank, a famous vehicle that needs no introduction. What makes the kit special is the accompanying Borgward IV Ausf.A heavy demolition vehicle, which could drop off a 500kg explosive charge. Operated via radio by its German crew, the remotely controlled Borgward IV was the heaviest type of Germany’s demolition vehicles used in WWII, with the Goliath and Springer representing the light and medium segments. It was introduced in 1942, with 616 of the 3.65m-long Ausf.A variant produced. This reusable demolition charge carrier wasn’t a great success, however, as it was unreliable and expensive. The Tiger I was introduced as the control vehicle for the Borgward IV in 1943-44. There were three companies that operated the Borgward IV. One of these, Panzer Kompanie (Fkl) 313, was subordinated to s.Pz.Abt.508 in December 1943. It had 14 Tiger Is, and its first combat was at Anzio in early 1944.

The Tiger I has Zimmerit, in keeping with that period of the war and for s.Pz.Abt.508, and it has suitable modifications for its control vehicle role. This includes a new antenna and base on the right side of the turret, with this antenna being used to communicate with the demolition charge-carrying vehicle. The well-detailed Borgward IV has not been on the market for a considerable period of time, so its release is much anticipated. Of course, its inclusion with the Tiger I to represent a combination used by C Company of s.Pz.Abt.508 makes it all the more explosively appealing!

Detailierter Plastikbausatz des Modells Pz.Kpfw.VI Ausf.E Tiger I Mid Production Remote Controller mit Borgward Ausf.A Heavy Demolition Vehicle s.Pz.Abt. 508, C Company im Maßstab 1:35

1:35 Sd.Kfz.250/7 Atle 8cm MortarCarrier

Art.-Nr.: 500776858

1:35 IJA Type 4 Light Tank "Ke-Nu"

Art.-Nr.: 500776854

Art.Nr.: 500776854 Artikelbezeichnung: 1:35 IJA Type 4 Light Tank "Ke-Nu" (Smart Kit)

The Type 4 Ke-Nu was a light tank used by the Imperial Japanese Army (IJA) in WWII. It was essentially a hybrid combining the hull of a Type 95 Ha-Go light tank with a turret from the Type 97 Chi-Ha medium tank. When the Type 97 was up-gunned with a higher-velocity 47mm gun, turrets with the original low-velocity 57mm tank gun became surplus and were installed onto the obsolete Type 95. The IJA received approximately 100 examples of the Type 4 Ke-Nu from 1944. While the type’s firepower improved, the heavier weight of the turret added a ton of weight and thus reduced its maximum speed to 40km/h. The 8.4-ton tank’s thin armor could be easily penetrated by Allied anti-tank weapons too. It was operated by a crew of three. Most tanks were retained on the Japanese mainland in anticipation of an Allied invasion, but some saw combat against the Soviets in Korea and Manchuria.

Dragon has produced a fine 1/35 scale plastic kit of the Type 4 Ke-Nu. Indeed, this model is another masterpiece from Dragon’s team of Japanese experts. The team conducted research on the real tank, produced highly accurate technical drawings, created the stunning box art and supervised the whole project to a successful conclusion. There are numerous new kit parts such as the turret with the characteristic ring antenna. Although the Type 4’s hull may look similar to that of Dragon’s Type 95 Ha-Go kit, the glacis plate has been completely redone. This will be one of the most eye-catching 1/35 releases of the year from Dragon, and it just proves the adage that good things do indeed come in small packages!

Detailierter Plastikmodellbausatz des Modells IJA Type 4 Light Tank "Ke-Nu" im Maßstab 1:35

1:35 Pz.Bef.Wg.III Ausf.K

Art.-Nr.: 500776853

Art.Nr.: 500776853 Artikelbezeichnung: 1:35 Pz.Bef.Wg.III Ausf.K

The Panzerbefehlswagen Ausf.K was designed to serve as a command tank for the German Army but, unlike preceding Panzer III command vehicles, it retained a main armament in the form of a 5cm KwK39 L/60 cannon. A total of 50 of these armed command tanks were produced between December 1942 and February 1943. It was based on a standard Panzer III Ausf.M chassis, and a star antenna was used instead of the previously favored frame antenna. The turret, adopted from a Panzer IV Ausf.F, featured a shorter mantlet, while the coaxial machine gun was deleted and an extra visor was added to the turret front.

Dragon previously released a Pz.Bef.Wg.III Ausf.K (Item No. 9118 in the Orange Box range), but this latest 1/35 scale kit has nothing in common with that release. Thus, the new command tank takes the most updated components from the latest Panzer III and IV kits in Dragon’s Smart Kit range to ensure that this fine new kit is of the highest quality. Besides, the horizontal upper-hull plate is new to fit the larger Panzer IV turret that was installed, plus the turret frontal armor, truncated gun mantlet and visor are new. Also new is the superstructure frontal armor plate plus three spare antennas stowed on the right-hand fender. Modelers seeking something a little different from a run-of-the-mill Panzer III need look no farther than this well-armed command tank.

Detailierter Plastikmodellbausatz des Modells Pz.Bef.Wg.III Ausf.K im Maßstab 1:35

1:35 Pz.Bef.Wg.V Panther Ausf.G

Art.-Nr.: 500776847

Art.Nr.: 500776847 Artikelbezeichnung: 1:35 Pz.Bef.Wg.V Panther Ausf.G

The 45-tonne Panther was one of the most important tanks used by Germany during WWII. A number of Panther Ausf. A and Ausf.G vehicles, 329 in fact, were converted into command tanks from May 1943 to February 1945. These were known in German as the Panzerbefehlswagen, and they were used as battalion and regimental command vehicles, as well as for ground-to-air liaison. One important design criteria was to make sure they looked inconspicuous compared to regular gun tanks so that they wouldn't be targeted by the enemy. These command tanks still retained the 7.5cm KwK42 L/70 main gun, but did not have the usual coaxial machine gun. The Befehls-Panther added an additional radio, which caused a corresponding reduction in ammunition stowage. A FuG5 radio was installed in the turret and a FuG7 or FuG8 in the hull.

We are now offering a 1/35 scale kit of a Befehls-Panther Ausf.G. As the name indicates, this command tank is based on a Panther Ausf.G hull. The kit thus inherits the best aspects of Dragon’s phenomenal Panther G kit family, with all the necessary additions typical of a Befehls-Panther. For example, there is a star antenna on the engine deck and the correct mantlet for a command Panther is present. DS tracks are included for easy assembly. this Befehls-Panther kit will command a lot of respect thanks to its accurate, even easier-to-build characteristics.

Detailierter Plastikmodellbausatz des Modells Pz.Bef.Wg.V Panther Ausf.G im Maßstab 1:35

1:35 T95 Super Heavy Tank

Art.-Nr.: 500776825

Art.Nr.: 500776825 Artikelbezeichnung: 1:35 T95 Super Heavy Tank

The T28 Super Heavy Tank (#6750) is one of the most astonishing kits to emerge from Dragon in recent times! The T28 was designed to breach the defenses of the Siegfried Line during the latter part of WWII, but the 95-ton monstrosity arrived too late to participate in the war. Its name was altered to 105mm Gun Motor Carriage T95 in March 1945 since the armament was hull-mounted rather than in a turret. Dragon has overhauled its T28 kit and assigned it a new 155mm T7 main gun of the type used on the developmental T30 Heavy Tank. Of course, such a vehicle did not exist in reality, but this hull/gun combination is very popular in the online gaming world. Thankfully for these many fans, Dragon now allows them to produce and own such a mighty armored vehicle!

The size of the model is simply overwhelming – the lower hull is more than 300mm long! The double track runs are made from DS tracks, and the outer tracks can be detached just like the real ones should a modeler decide to opt for this configuration. The impressive 155mm gun barrel is newly produced. This was a monster of a tank in its day, and Dragon has made it even more monstrous for contemporary warriors with the addition of a more powerful 155mm gun that better befits the vehicle’s size! As a special bonus, modelers can either choice to build the T28 with parts provided in the box as well.

Detailierter Plastikmodellbausatz des Modells T95 Super Heavy Tank im Maßstab 1:35

1:35 Panther Ausf. D V2

Art.-Nr.: 500776822

Art.Nr.: 500776822 Art.bezeichnung: 1/35 Panther Ausf.D V2

The German Panther was one of the best tanks to see service in WWII, representing an ideal balance of firepower, mobility and protection. Two companies – Daimler-Benz and MAN – submitted design proposals for the new tank type, with the latter’s platform eventually being selected. Two final pre-production prototypes were delivered in November 1942 (V1 and V2), and series production of the sleek-looking Panther tank soon commenced. These had a number of differences compared to the first series production Panther Ausf.D variant, including a 650hp engine (instead of the later 700hp), a 60mm-thick glacis and a ball-shaped muzzle brake.

Dragon is proud to launch its first 1/35 scale kit of the prototypical Panther V2 created by MAN in the autumn of 1942. The kit is logically based on Dragon’s existing Panther family kits, but there are many new parts incorporated into it to reflect the characteristics of this early prototype. These differences include the turret (with curved sides), upper hull, engine deck and road wheels (with 18 rim bolts instead of the later 16). Another example of its differences was that there were no interlocking armor plates on the hull. This Versuchs-Serie FgSt.Nr.2. tank has been intricately replicated in 1/35 scale, drawing upon Dragon’s technical and technological expertise. This Panther V2 kit is thus a welcome addition to the lineage of the Panther family.

Detaillierter Plastikmodellbausatz

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:35 Sturmpanzer Ausf.I als Befehlspanz.

Art.-Nr.: 500776819

Art.Nr.: 500776819 Art.bezeichnung: 1:35 Sturmpanzer Ausf.I als Befehlspanz.

Dragon has already released 1/35 scale Early-Production and Mid-Production variants of the German Brummbär, an assault infantry vehicle armed with a 15cm StuH.43 L/12 gun. Sixty vehicles rolled off the production line in November-December 1943, and they are easily identified by the lack of a machinegun in the glacis plate. Most of these were based on Panzer IV Ausf.G chassis, and were crewed by four men rather than the five of later vehicles. Dragon has now expanded the family by adding a Command version based on the same Pz.Kpfw.IV Ausf.G chassis.

This special version fitted with extra communications equipment is called the Sturmpanzer Ausf.I als Befehlspanzer. This kit features the zimmerit coating that appeared on all Brummbär vehicles built up till September 1944.

Dragon’s 1/35 scale kit features all the typical characteristics of an Early-Production Brummbär based on the Panzer IV G chassis. Of course, it includes the distinctive star antenna that identifies it as a Befehlspanzer too. The kit also features an extremely realistic-looking zimmerit coating straight from the hands of a master craftsman. The accurate, one-piece fighting compartment is made from a 4-directional slide mold in order to ease construction and save assembly time, as well as ensuring Dragon’s patented zimmerit technique is sharply represented. This is a finely detailed kit, and with the zimmerit already molded on, it amounts to a command performance!

Detaillierter Plastikmodellbausatz

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:35 PzKpfw.IV Ausf.A Up-Armored Version

Art.-Nr.: 500776816

Art.Nr.: 500776816 Art.bezeichnung: 1:35 PzKpfw.IV Ausf.A Up-Armored Version

Dragon earlier completed its Panzer IV grand slam in 1/35 scale with the release of the Ausf.A several years ago. That meant Dragon is able to offer a modern and accurate kit of every member of the Panzer IV family – the A, B, C, D, E, F, G, H and J! The Ausf.A was obviously the grandfather, with 35 tanks produced from October 1937 to March 1938. It stemmed from a development contract issued to Krupp in 1935. The design featured a short-barreled 7.5cm KwK37 L/24 main gun and two MG34 machine guns. As befitting what was essentially a pre-series design, the maximum armor thickness on the 18.4-ton design was just 14.5mm on the hull and 20mm on the turret. With the Panzer IV Ausf.A slated to see service in the 1939-40 campaigns in Poland, Norway and France, there was obviously a need to improve the thickness of its armor. Thus, a number of Panzer IV Ausf.A tanks were up-armored by adding extra armor plates on the front hull and glacis. Dragon’s newest Panzer IV kit allows modelers to reproduce these tanks with applique armor that were slightly better suited to combat.

This1/35 scale plastic kit is based on Dragon’s leading kit of the Panzer IV Ausf.A (item No.6747). This particular variant has been created by supplying the relevant additional armor plates that fit onto the front end of the tank. Indeed, the kit has been up-armored in precisely the same way as the original was! Additionally, the front inspection hatches have been newly made by photo-etched parts with different details compared to the previously provided ones. The tank comes with early-style 38cm DS Tracks to make sure they’re easy to assemble. This kit offers greater protection to the crew…and more variety for the modeler!

1:35 Wittmann's Last Tiger

Art.-Nr.: 500776800

1:35 Battle of Smolensk & Roslavl 1941

Art.-Nr.: 500776791

Art.Nr.: 500776791 Art.bezeichnung: 1:35 Battle of Smolensk & Roslavl 1941

Dragon already utilizes high-tech engineering processes to create its kits, but now the newest-generation technology is influencing – and improving – its 1/35 scale range of figures. So just what is this newest technological leap forward? It’s figure sets that are wholly designed using computers. In other words, no master figure is produced or needed. From initial design through to final tooling using advanced computer programs, 100% of the detail is retained in the computer files. Indeed, the results are evident in Dragon’s newest set of 1/35 scale German infantry. There are three figures in this new set depicting soldiers fighting in the Battle of Smolensk and Roslavl in 1941. After enormous success during the invasion of Russia, German forces were delayed at Smolensk from 10 July to 10 September 1941. Although a Russian counterattack there failed, this defensive battle was critical to Russia as it slowed the German advance and made reaching Moscow that much more difficult.

The poses of these three soldiers are designed to be universally versatile. The trio is standing in relatively relaxed poses. A close examination of these molded plastic figures reveals how impeccable all the computer-generated detail is. Whether it’s their faces, hands, uniforms or belts, these figures are truly full of intricate detail. To make this first such figure set even more appealing, the box includes a number of BONUS accessories made of DS materials. These are all bonus items in addition to the hi-tech figures themselves. While these German soldiers might be just standing around, the technology that Dragon used to create them has leapt forward by a generation!
 

1:35 Pz.Kpfw.IV L/70(A) Final Production

Art.-Nr.: 500776784

Art.Nr.: 500776784 Artikelbezeichnung: 1:35 Pz.Kpfw.IV L/70(A) Final Production

Germany produced a number of tank destroyers in an effort to resist the tide of armor pushing against it from all sides. One of these designs was the Panzer IV/70(A). As indicated by its name, this vehicle was based on an unchanged Panzer IV chassis (specifically an Ausf.J) and it was produced by Alkett as an interim design. A total of 278 tank-killer vehicles were produced concurrently with the more common Jagdpanzer IV/70(V) from August 1944 to March 1945. A long-barreled 7.5cm PaK 42 gun was mounted in the superstructure. The nose-heavy attitude of the vehicle dictated that the first four road wheels be steel-rimmed, while the vertical lower sides of the superstructure visually distinguish this type from the Jagdpanzer IV/70(V).

Dragon has created another 1/35 scale version of this important tank destroyer. It’s based on Item No.6689, itself based on Dragon’s Panzer IV Smart Kit family. This newest Pz.Kpfw.IV/70(A) family member is a Late-Production type, and the major difference is that it possesses a modified hull derived from a later-production series of the Panzer IV. The suspension features three return rollers per side, plus there are other detail differences appropriate to a Late-Production vehicle. As a Smart Kit, there’s a one-piece lower hull, convenient Magic Tracks and the fighting compartment is made by slide molds so no multipart assembly is necessary. There are Schurzen side skirts and of special interest is the mounted MP44 Vorsatz "P", a weapon with a curved barrel to protect blind-spots not covered by the mounted MG42 machine gun. The gun breech is fully represented, and it can be viewed through the open roof hatches. Welcome to the new family addition!

Detailierter Plastikmodellbausatz des Modells Pz.Kpfw.IV L/70(A) Final Production (Smart Kit) im Maßstab 1:35

1:35 Operation Marita, Greece 1941

Art.-Nr.: 500776783

Art.Nr.: 500776783 Artikelbezeichnung: 1:35 Operation Marita, Greece 1941

On 6 April 1941, Germany invaded the nation of Greece. It was forced to do so by the failure of the earlier Italian invasion to conquer Greece in October 1940. The Germans codenamed this invasion Operation Marita. When the German assault kicked off, most Greek troops were on the Albanian border fighting the Italians. Therefore, the German second front striking from Bulgaria immediately put Greek forces, as well as a small contingent of British Commonwealth troops, on the back foot. Greek forces on the Albanian border were quickly outflanked, forcing their surrender, while Commonwealth troops performed a tactical retreat with an eye to evacuation. Athens fell on 27 April within three weeks of the campaign beginning. Operation Marita ended three days later with the complete conquest of the Greek mainland.

Dragon has released a new 1/35 scale figure set depicting German soldiers during Operation Marita in 1941. The four newly tooled figures are beautifully sculpted in lifelike poses. To illustrate their practicality for a range of settings, their uniforms show interesting variety such as NCO breeches and a tank commander’s jacket. Even the badges on their jackets are sharply molded. These four German soldiers will fit admirably in a figure or vehicle diorama depicting the Greek campaign, and in fact they’re versatile enough to fit any theater of that period of WWII. The Greek campaign is little covered by model figures, so this set is an invaluable addition for the modeler’s repertoire.

Detailierter Plastikmodellbausatz des Modells Operation Marita, Greece 1941 im Maßstab 1:35

1:35 IJA Type 95 HA-GO Light Tank

Art.-Nr.: 500776770

Art.Nr.: 500776770 Artikelbezeichnung: 1:35 IJA Type 95 HA-GO Light Tank

When Dragon introduced its new 1/35 scale gem of a Type 95 "Ha-Go" light tank of the Imperial Japanese Army (IJA), it garnered great excitement in the modeling fraternity in 2012. Based on actual measurements from surviving tanks, that particular kit (Item No.6767) represented an Early-Production variant of this small tank. Now Dragon has released another Type 95 plastic kit, this time depicting one with Late-Production features. The Type 95 tank was used in combat against China and Russia, as well as fully participating in Japanese operations in WWII. Weighing just 7.4 tonnes, it was designed primarily as an infantry support weapon. Indeed, it was the most common light tank used by the IJA in the Pacific, with about 2,300 units manufactured by Mitsubishi Heavy Industries. It had a crew of three, and the main armament was a Type 94 37mm gun. Its maximum speed was 45km/h.

The kit has received many new parts so it can accurately depict a Late-Production "Ha-Go". They include a new cupola on the turret, and rounded front fenders (the Early-Production type’s fenders were flat and squarely cut off). The frontal armor and glacis plate are suitably modified too, plus the towing hook on the front is new. Meanwhile, the turret and one-piece upper hull and lower hull remain unchanged. They’re still brimming with detail thanks to the widespread use of slide molds. In fact, every single sprue in the kit employs slide molds, which is an astounding achievement! The road wheels, idlers, sprockets and return rollers are slide-molded, whilst the DS slide-molded track links are accurately replicated in miniature so as to incorporate side details. The "Ha-Go" was used in diverse battlefield locations, so modelers can really go to town by producing any scenario such as jungle-clad terrain or a Pacific tropical island!

Detailierter Plastikmodellbausatz des Modells IJA Type 95 HA-GO Light Tank Late Prod. (Smart Kit) im Maßstab 1:35

1:35 Armored 1/4TON 4x4Truck mit Bazooka

Art.-Nr.: 500776748

Art.Nr.: 500776748 Artikelbezeichnung: 1:35 Armored 1/4TON 4x4Truck mit Bazooka

The military vehicle known in official US nomenclature as Truck, 1/4 Ton, 4x4, is probably the world’s most famous design in its class. This iconic WWII vehicle was produced from 1941-45, with more than 634,000 rolling off American production lines. They faithfully served not only the US military, but also allies like the UK, France and Russia. These small 4x4 vehicles were employed in numerous battlefield tasks, with one role being that of reconnaissance and scouting. Some vehicles involved in such missions were fitted with steel plates to better protect the occupants, and early efforts soon led to the fitting of specially designed armor kits.

Followed on from a very popular earlier release (Item No.6714), Dragon has produced another exciting 1/35 scale kit of a 1/4-Ton Armored 4x4 Truck. The difference this time around is that it carries two bazookas instead of the original kit’s .50-cal machine gun. The twin bazookas are fitted on a pintle mount that’s newly tooled especially for this release. Such an improvised weapon installation was observed on scout jeeps during the Battle of the Bulge, for example. The vehicle features a solid one-piece body tub for accurate assembly and alignment. Under the hood is an extremely realistic-looking engine that assembles from multiple parts; it can be shown off if the modeler chooses to model the hood up. Atop the hood, the windscreen is depicted wrapped in a canvas cover. The new armor plates are rendered in photo-etched metal to give a true-to-scale appearance, while other metal components provide items such as tool mounting brackets, hood retainers and various straps. All in all, this is one extremely potent little vehicle!

Detailierter Plastikmodellbausatz des Modells Armored 1/4TON 4x4Truck mit Bazooka (Smart Kit) im Maßstab 1:35

1:35 Gebirgsjägers Crete 1941

Art.-Nr.: 500776742

Art.Nr.: 500776742 Artikelbezeichnung: 1:35 Gebirgsjägers Crete 1941

Operation Mercury, the Battle of Crete, was joined on 20 May 1941 when German airborne troops parachuted onto the Mediterranean island. The bloody battle lasted eleven days, but at last it resulted in the German capture of the Allied-controlled island. Crete had offered valuable harbors for the Royal Navy and airfields for RAF bombers, so its loss was keenly felt. What is perhaps not so well known is that German Gebirgsjäger (mountain troops) played a significant part in the operation alongside their airborne brethren. The 5th Gebirgs-Division had a force of 15,000 men in three infantry regiments (85th, 100th and 141st) and an artillery regiment (95th), and it was inserted by air and sea as a follow-up force. This task was made easier by the capture of Maleme airfield on the second day of the battle. The Gebirgsjäger were ideal for the task as they had light weapons, were easily moved by air, and could handle the mountainous terrain of Crete.

Dragon’s latest 1/35 scale figure set features four Gebirgsjäger soldiers from the Battle of Crete. The plastic German soldiers are sharply molded and their uniforms and personal equipment are accurately depicted. To suit them for summer combat in the Mediterranean, they are all wearing cotton shorts instead of their usual battledress. These shorts give the soldiers a unique appearance. On their heads are distinctive caps with the edelweiss emblem, while their feet are shod in typical mountain boots. They carry a complement of light weapons such as Kar98k rifles and an MP40 submachine gun. The poses of these Gebirgsjäger are lifelike, with two taking a brief rest from combat, while another two prepare to move further over the rough terrain. These versatile German figures from Dragon are ideal for a Crete scene, or even for some other warm-weather battle elsewhere.

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:35 Operation Typhoon 1941

Art.-Nr.: 500776735

Art.Nr.: 500776735 Artikelbezeichnung: 1:35 Operation Typhoon 1941

Deutschland startete seinen massiven Einmarsch in die Sowjetunion im Juni 1941 mit dem Ziel, den militärischen und politischen Apparat des Landes zu zerstören und sein Territorium zu erobern. Der Angriff konnte einen frühen Erfolg verzeichnen und die Kräfte der Mittellinie drangen weit nach Russland ein. Die Operation Taifun war Deutschlands strategische Offensive zur Eroberung der Hauptstadt Moskau, Russlands politisches Zentrum. Die Operation bestand aus zwei Zangen nördlich und südlich von Moskau in Form von Panzergruppen sowie einer großen Streitmacht, die sich von Westen direkt auf die Stadt zu bewegte. Die deutschen Kräfte kamen schließlich jedoch, nachdem sie sich mit länger werdenden Versorgungslinien, dem lähmenden Wintereinbruch und dem stärker werdenden Widerstand konfrontiert sahen, in den Außenbezirken von Moskau zum Stillstand. Dieser erbitterte Kampf fand zwischen Oktober 1941 und Januar 1942 statt, bevor die sowjetischen Gegenoffensiven das Blatt wendeten. Der Kampf um Moskau forderte rund eine Million Todesopfer und er stellte den ersten Rückzug Deutschlands dar, von welchem es sich nie mehr erholen sollte.

Das neueste Figurenset von Dragon im Maßstab 1 : 35 stellt deutsche Soldaten der Operation Taifun dar. Die Figuren sind gegen das eiskalte Winterwetter, das die Bedingungen noch gefährlicher werden ließ, eingemummt. Typisch für die Zeit sowie für Deutschlands schlechte Vorbereitung auf eine Kriegsführung im Winter, tragen die vier Soldaten ein Sammelsurium an Kleidung. Ein General trägt einen Schafsfellmantel, eine Bekleidung, die selten im Maßstab 1 : 35 produziert wird. Die Posen sind äußerst lebendig und man kann fast spüren, wie die Kälte durch ihre Kleidung kriecht und wie ihnen das Schneegestöber entgegen bläst.

Diese wohl geformten Figuren können einzeln in einer Szene oder in einer Gruppe zusammen gestellt in einer Winterszene verwendet werden. Dies war der erste strenge Winter, dem die deutschen Truppen

Detailierter Plastikmodellbausatz des Modells Operation Typhoon 1941 im Maßstab 1:35

1:35 Ardelt-Rheinmetall 8.8cm PaK 43

Art.-Nr.: 500776728

Art.Nr.: 500776728 Artikelbezeichnung: 1:35 Ardelt-Rheinmetall 8.8cm PaK 43

At the recent Nuremberg Toy Fair, Dragon excited modelers with a tantalizing look at a new 1/35 scale model. The upcoming kit represents a German design that reached only prototype status, but which is a fascinating subject nonetheless. The vehicle is the Ardelt-Rheinmetall 8.8cm PaK 43 Waffenträger. The conceptual idea behind this weapon system was a self-propelled mount for the powerful but heavy 8.8cm antitank gun, as towed versions of this gun were too unwieldy for crews to move readily. Ardelt and Rheinmetall combined to build the first prototype and tests were conducted on this Ardelt I. The vehicle’s engine was fitted at the front of the hull, which permitted the main armament – an 8.8cm L/71 cannon – to be fitted on the rear. It utilized a 38(t) chassis with four road wheels per side. An improved prototype (Ardelt II) was later produced by Ardelt and Krupp, but the end of the war intervened before production got off the ground.

Dragon’s kit represents the original Ardelt-Rheinmetall prototype, and it’s a scintillating subject in 1/35 scale. To suit the prototypical nature of the Waffenträger, the plastic model employs brand new upper-hull and lower-hull components. The open-top fighting compartment is filled with details, and the armor plates surrounding it have been carefully manufactured to achieve the correct scale thickness. Taking center stage, of course, is the massive 8.8cm PaK 43 antitank gun. This weapon is fully reproduced from the tip of its muzzle brake to the breech. All in all, Dragon offers modelers the highest-quality kit of this novel Waffenträger.

Detailierter Plastikmodellbausatz des Modells Ardelt-Rheinmetall 8.8cm PaK 43 Waffenträger (Smart Kit) im Maßstab 1:35

1:35 Sd.Kfz.10/4 f.2cm FlaK 30 1940 Prod

Art.-Nr.: 500776711

Art.Nr.: 500776711 Artikelbezeichnung: 1:35 Sd.Kfz.10/4 f.2cm FlaK 30 1940 Prod.

Germany fielded a wide range of halftracks during WWII. The Sd.Kfz.10, one of the lighter types, was conceived as a prime mover for small towed guns such as the 3.7cm PaK 36. Measuring 4.5m long and weighing 4.9 tonnes, this Demag-designed vehicle had a 1-ton payload capacity. Around 14,000 Sd.Kfz.10 halftracks were built from 1938-45. Several specialist vehicles were based on this halftrack design, among them the Sd.Kfz.10/4. This type had a platform on the rear for carrying an antiaircraft 2cm FlaK 30 cannon. The purpose-built platform had fold-down sides and rear for the seven-man crew to serve and traverse the weapon. The Sd.Kfz.10/4 was used by both the Wehrmacht and Luftwaffe, and it commonly pulled a two-wheel trailer containing ammunition.

Dragon has now expanded the family with an Sd.Kfz.10/4 towing the standard ammo trailer. The kit’s fully detailed, and even hidden internal components like the engine and gearbox are provided. Upgraded road wheels and Magic Tracks have resulted in a spectacular halftrack/trailer combination. Moreover the kit comes with an array of NEW parts like the loading ramps which can be either assembled for dismounting the gun in the rear or put in front of the vehicle. Besides, it receives new handle on both sides. Designed to hit low-flying Allied aircraft, and with plenty of spare ammo available in the trailer, this vehicle will also be a hit with modelers!

Detailierter Plastikmodellbausatz des Modells Sd.Kfz.10/4 für 2cm FlaK 30 1940 Production w/Ammo Trailer (Smart Kit) im Maßstab 1:35

1:35 LeFH18/40/2(Sfl)a.G.W.PzKpfw.III/IV

Art.-Nr.: 500776710

Art.Nr.: 500776710 Artikelbezeichnung: 1:35 LeFH18/40/2(Sfl)a.G.W.PzKpfw.III/IV

Deutschland entwickelte während des Zweiten Weltkriegs eine Vielzahl unterschiedlicher selbstangetriebener Haubitzen, doch nicht alle erreichten die Produktionsreife. Zu den interessantesten Typen gehörte die le.FH.18/40/2 auf.Pz.III/IV Sfl. Angesichts ihres komplizierten Namens ist es nicht verwunderlich, dass dieses Fahrzeug so wenig bekannt ist! Dragon verleiht diesem Waffenträger einen enormen Popularitätsschub und bringt nun als erster Hersteller einen Plastikbausatz im Maßstab 1:35 dieses Waffensystems heraus! Das 25-Tonnen-Fahrzeug war mit einer 10,5 cm le.FH.18/40/2 in einem Kampfraum bewaffnet, führte auf dem Heck der Wanne aber auch Schleppstangen und Räder mit, damit die Haubitze bei Bedarf abmontiert und als gezogenes Geschütz verwendet werden konnte.

Im März 1944 wurde von Alkett / Rheinmetall-Borsig ein Prototyp fertiggestellt, der in direkter Konkurrenz zur Heuschrecke 10 von Krupp stand. Man entschied sich schließlich, das Fahrgestell des Geschützwagens IV (Hummel) als Basis zu nehmen und die Konstruktion auf 80 Schuss Munition und Bedienung durch eine fünfköpfige Besatzung auszulegen. Die Produktion sollte im Februar 1945 beginnen, doch hat nie ein fertiges Fahrzeug das Werk verlassen.

Die Konstruktion war absolut außergewöhnlich und Dragon hat ihr eine Sonderbehandlung zuteil werden lassen. Die einzigen Teile, die von anderen aktuellen Bausätzen stammen, sind die Laufrollen, die Magic Tracks und einige OVM-Artikel – alle anderen Teile sind absolut neu! Dragon spielt hier ganz sicher die Vorhut, denn es bietet als erstes Unternehmen überhaupt die le.FH.18/40/2 auf Pz.III/IV Sfl. als Plastikbausatz an. Die in einem Kampfraum mit offenem Dach montierte Haubitze des Typs le.FH.18 ist eine brandneue Kreation. Falls der Modellbauer es wünscht, hat er auch die Option, dieses Infanteriegeschütz als gezogene Haubitze mit montierten Rädern und Schleppstangen zusammenzubauen. Der Kampfraum weist eine Fülle von De

1:35 Deutsche Waffen Grenadiere 1944-45

Art.-Nr.: 500776704

Art.Nr.: 500776704 Artikelbezeichnung: 1:35 Deutsche Waffen Grenadiere 1944-45

Deutsche Figuren im Maßstab 1:35 sind bei Modellbauern immer gefragt – das neuestes Set von Dragon wird sicher ebenfalls gefallen. Enthalten sind vier Soldaten aus der Endkriegszeit. Dieses Set ist deshalb so vielseitig, weil die Figuren entweder einzeln oder auch gemeinsam aufgestellt werden können, um eine zusammenhängende Vignette zu erhalten. Die Posen sind so gewählt, dass sie zu jedem Fahrzeug im Zeitrahmen 1944-45 passen, haben jedoch immer noch ein individuelles Flair. Die Soldaten stellen Mitglieder der Waffen-SS dar. Zum Höhepunkt ihrer Macht bestand die Einheit aus 38 Divisionen. Es handelt sich hierbei um den bewaffneten Flügel der Schutzstaffel aus dem Dritten Reich und stand nie unter dem Kommando des regulären Heers.

Diese vier Waffengrenadiere im Maßstabe 1:35 sind sorgfältig in Kunststoff modelliert. Die Posen sind besonders lebensecht; die genaue Faltenlegung der Tarnkleidung wurde sorgfältig bedacht. Besonders ist hier vor allem der Unteroffizier mit einem Kapuzenparka, der über seinen Helm gezogen ist. Die Kapuze wurde im kleinen Maßstab authentisch gefertigt. Jeder Soldat hat seine eigenen Gen2 Waffen und zusätzliche Ausrüstung. Damit passen sie zum Beispiel an die West- oder auch die Ostfront. Im Set enthalten sind Waffen wie K98k-Gewehre, eine MP 40 Maschinenpistole, Panzerfaust und ein StG 44 Sturmgewehr. Als Panzergrenadiere begleiten diese Figuren gepanzerte Fahrzeuge und werden sicherlich eine wahre Freude für den Diorama-Macher sein.

Detailierter Plastikmodellbausatz des Modells Deutsche Waffen Grenadiere 1944-45 im Maßstab 1:35

1:35 "Chow Time"Ger.Anti-Tank Crew + PaK

Art.-Nr.: 500776697

Art.Nr.: 500776697 Artikelbezeichnung: 1:35 "Chow Time"Ger.Anti-Tank Crew + PaK

War is characterized by long periods of boredom punctuated by frenetic bursts of activity. Eating is obviously one way of passing the hours of inactivity – even if army food isn’t that stimulating – and this is what the latest 1/35 scale figure set from Dragon depicts. The box contains three German Wehrmacht anti-tank crewmen eating their supper. This is such a typical scene on any battlefield, but so few kit manufacturers have bothered to represent it. Nevertheless, Dragon has captured a mealtime to perfection with this set subtitled ‘Chow Time!’ The three crewmen aren’t the only content of the box, for there is also a beautifully detailed PaK 35/36 3.7cm anti-tank gun included as well. This cannon emanates from a previous Dragon release, but the accompanying soldiers certainly bring it to life.

The three soldiers are well sculpted in greatcoats and caps, suggesting an autumn or winter scene somewhere on the frontlines. Two crewmen are digging into the mouthwatering (!) contents of their mess tins, while another is attempting to open a can with his bayonet. The set’s accessories such as a loaf of bread and canned food will prove valuable for all manner of diorama scenes. This domestic-looking set fills a gap in the range of plastic figures currently available on the market. Modelers will doubtlessly find this set appetizing as a standalone vignette or, alternatively, with the contents mixed and matched in a larger diorama. Serve it up, Dragon!

Detailierter Plastikmodellbausatz des Modells "Chow Time" German Anti-Tank Crew w/3,7cm PaK 35/36 Eastern Front im Maßstab 1:35

1:35 German Wehrmacht BIVOUAC

Art.-Nr.: 500776695

Art.Nr.: 500776695 Artikelbezeichnung: 1:35 German Wehrmacht BIVOUAC

There’s a saying – ‘The army sleeps under the stars, the navy navigates by the stars, and the navy chooses its hotels by the number of stars!" This newest 1/35 scale figure set well and truly represents the former. The box contains three German Wehrmacht anti-tank crewmen along with a temporary bivouac they’ve set up in the field. This is such a typical scene on any battlefield, but no kit manufacturer has bothered to represent it thus far. Such a shelter could be swiftly created by erecting a triangular M1931 pattern Zeltbahn (‘shelter quarter’). The Zeltbahn was a very handy and crucial item of kit, as it could also be used as a rain cape, emergency stretcher, flotation device, or combined together to form a complete tent. The kit includes such a beautifully detailed Zeltbahn in which a soldier can rest.

The three soldiers are sharply sculpted in casual poses as they await the war to reach them. Appropriately, they’re in various states of casual dress. One is wearing a woolen pullover while the other two are in shirts and braces. Various accessories such as a haversack and a range of personal gear are valuable for a diorama scene, though the 7.5cm leIG18 light infantry gun shown on the box-top isn’t included in the set. This domestic scene, especially with the erected M1931 Zeltbahn shelter, fills a gap in the range of plastic figures currently available on the market. While it would best suit an early-war scene, the figures are versatile enough to be mixed and matched to fit multiple scenarios planned by the modeler.
 

1:35 Defense of the Reich

Art.-Nr.: 500776694

Art.Nr.: 500776694 Artikelbezeichnung: 1:35 Defense of the Reich

1944 hatte der Kriegsverlauf eine Wendung genommen, denn Deutschland musste sich an allen Fronten zurückziehen. Seine Streitkräfte, die bereits von fünf Jahren zermürbenden Kampf erschöpft waren, wurden immer weiter in die Richtung der Grenzen des Dritten Reichs zurückgedrängt. 1945 wurden die Grenzen des Vaterlandes von den alliierten Einheiten sowohl im Osten als auch im Westen überschritten. Das neueste inspirierende Dragon Figuren-Set im Maßstab 1:35 stellt vier deutsche Soldaten bei der Verteidigung ihres Landes im Zeitraum 1944-1945 dar.

Das Quartett zeichnet sich durch eine Vielfalt ihrer Uniformen, Ausrüstungen und Waffen aus. Sie trugen nicht mehr die ordnungsgemäßen und gut geschnittenen grauen Uniformen aus der Zeit des Blitzkriegs. Stattdessen tragen die Soldaten in diesem Set eine Tarnkleidung, einen Fallschirmjäger-Overall und eine Figur sogar eine spezielle Hitlerjugend-Winteruniform. Ihre Waffen spiegeln ebenso die Zeit gegen Ende des Krieges wieder. Zum Beweis tragen sie ein MP 44 Sturmgewehr, ein Kar 98k Gewehr, ein halbautomatisches Gewehr 43 und ein FG 42 Gewehr, wie es von Elite-Fallschirmjägern genutzt wurde, bei sich. Das HJ-Mitglied führt zudem eine Panzerfaust 100m mit sich, eine Ein-Schuss-Panzerabwehrrakete, die ab September 1944 in Massen hergestellt wurde. Diese unterschiedlichen Figuren bieten unbegrenzte Einsatzmöglichkeiten in Dioramen und Szenenbildern. In realistischen Posen dargestellt, stehen diese genau recherchierten Figuren symbolisch für die verzweifelten letzten Monate des Zweiten Weltkriegs.

Detailierter Plastikmodellbausatz des Modells Defense of the Reich im Maßstab 1:35

1:35 British 25-PDR. Field Gun Mark.II

Art.-Nr.: 500776675

Art.Nr.: 500776675 Artikelbezeichnung: 1:35 British 25-PDR. Field Gun Mark.II with Limber and Crew

Das offiziell als "Ordnance QF 25-Pfünder" bezeichnete Artilleriegeschütz war während des 2. Weltkriegs der 'Arbeitsplatz' der britischen Feldartillerie und der Commonwealth-Feldartillerie. Den Namen verdankt das Geschütz dem Umstand, dass damit 25 Pfund schwere Geschosse abgefeuert wurden."QF" stand für "Quick Firing", also schnelles Feuern. Das 25-Pfünder-Geschütz wurde 1940 in Dienst gestellt und gilt wegen seiner hohen Feuergeschwindigkeit, der tödlichen Geschosse und der guten Mobilität bei vielen als das beste gezogene Feldgeschütz des Krieges. Weltweit wurden insgesamt 13.000 25-Pfünder-Geschütze gebaut, wobei das Geschütz vom Typ Mark II die im zweiten Weltkrieg am häufigsten eingesetzte Variante war. Für den Transport wurde die 1.633 kg schwere Haubitze häufig zu einer Munitionsprotze (bekannt als die "Trailer, Artillery, No 27") gezogen, die 32 Runden Munition enthielt. In der Regel wurden dann beide Teile mit einer 4x4-Zugmaschine für die Feldartillerie gezogen. Die Bedienungsmannschaft für das Geschütz umfasste 6 Soldaten - Geschützchef, Verschlusswart, Schichter, Lader und zwei Munitionswarte.

Dragon hat einen fantastischen neuen Bausatz dieses britischen Feldgeschützes herausgebracht. Das Modell zeigt eine Standardausführung eines 25-Pfünder-Geschützes vom Typ Mark II. Für das Modell im Maßstab 1:35 wurde gründlich recherchiert, wobei Original-Geschütze als Referenz dienten, so dass das Modell sich durch einzigartige Präzision auszeichnet. Das Geschütz verfügt über exakte Abmessungen und beeindruckende Details. Doch nicht nur das, als Smart Kit ist es auch besonders problemlos zusammenzubauen. Dank dem Einsatz des Slide-Mold-Verfahrens wurden, wo immer möglich, Komponenten in so wenige Teile wie möglich zerlegt. Und natürlich gehört zu dem Geschütz auch die entsprechende Munitionsprotze. Die Protze ist mit zwei offenen Türen ausgestattet, die einen Einblick in das Innere des Munitionslagers gewäh

Detaillierter Plastikmodellbausatz des Modells British 25-PDR. Field Gun Mark.II w/Limber & Crew im Maßstab 1:35

1:35 STUG.III Ausf.F/8 Late Production

Art.-Nr.: 500776644

Art.Nr.: 50077644 Artikelnummer: 1:35 STUG.III Ausf.F/8 Late Prod.

The Sturmgeschütz III (StuG.III) has the distinction of being Germany’s most widely produced AFV of WWII, with 10,619 eventually manufactured. Based on the chassis of the Panzer III, it was cheaper and faster to build since it did not have a rotating turret. Once German troops began encountering heavily armored Russian tanks, the StuG III Ausf.F was fitted with a longer 7.5cm gun. This marked its first true emergence as a tank destroyer. The further modified Ausf.F/8 was produced from September-December 1942, with 250 vehicles built. It featured a 7.5cm StuK L/48 main gun. The "8" designation came about because it was the eighth update to the Panzer III hull. Special features of later Ausf.F/8 vehicles were 30mm bolted-on armor plates.

Dragon has launched a new 1/35 scale kit of a Late Production variant of the StuG.III F/8. Of special note is that this tank destroyer comes equipped with winter tracks. Dragon released a StuG.III G kit several years ago and it was an instant hit with modelers worldwide. This earlier variant is just as accomplished and is destined to achieve the same legendary status. The kit boasts a brand new fighting compartment to accurately portray this vehicle type. In order to reproduce the irregular shape of the roof, it is assembled from several well-fitting parts. Other new parts include the engine deck and fenders. Even the air intake covers are remodeled to better reflect the type fitted on the Ausf.F/8. Based on the amazing new Winterketten tracks, this StuG.III is ready for winter combat. Modelers will note that, even though the same innovative manufacturing technique is used for these winter tracks, a different pattern is apparent here. Ice cleats are also provided in this gripping kit!

Detaillierter Plastikmodellbausatz

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:35 Sd.Kfz.251/17 Ausf.C /Command Vers.

Art.-Nr.: 500776592

Art.Nr.: 500776592 Artikelbezeichnung: 1:35 Sd.Kfz.251/17 Ausf.C /Command Vers.

The Sd.Kfz.251 series of halftracks was popular with German troops during WWII, with a whole range of variants eventually being fielded. Similarly, Dragon’s 1/35 range of Sd.Kfz.251 halftrack plastic kits are extremely popular with model-makers. The range is already extensive but Dragon is releasing another kit that offers even more versatility. The new 1/35 scale kit is an Sd.Kfz.251/17 Ausf.C halftrack, but the notable feature is that it’s a 2-in-1 kit. Modelers can thus build either a Sd.Kfz.251/17 fitted with a 2cm Flak 38 cannon, or an Sd.Kfz.251/17 Command Vehicle. On the former variant, the 20mm gun was mounted to have all-round traverse, though the original conversion necessitated considerable rebuilding of the superstructure. The Command Vehicle, on the other hand, was equipped with Fu5 and Fu7 radio sets as well as a distinctive frame antenna.

Dragon offers the complete fighting compartments unique to these Ausf.C variants, meaning there’s no need for modelers to cut and rework the vehicle in order to produce a 251/17. Though the details and configurations are complex, clever engineering by Dragon makes assembly a breeze. The set obviously incorporates Dragon’s highly accurate and prized 2cm Flak 38 gun too, which has been released previously. The overall result is a kit that’s very accurate, and the 2-in-1 status offers modelers an even wider scope of Sd.Kfz.251 vehicles to build.
 

1:35 Leichte (Funk) Pz. KPFW. I Ausf. A

Art.-Nr.: 500776591

Art.Nr.: 500776591 Artikelbezeichnung: 1:35 Leichte (Funk) Pz. KPFW. I Ausf. A

Dragon has previously released a variety of superbly detailed 1/35 scale plastic kits of variants from the Panzer I family, including gun tanks and command-and-control vehicles. However, the current kit under consideration depicts a Panzer I Ausf.A (Sd.Kfz.101) especially modified for the important Funk (radio) role in Germany’s new panzer units. A total of 818 Pz.Kpfw.I Ausf.A tanks were produced from July 1934 to June 1936, and some were modified into specialist versions in this way. The main change was the replacement of the machine gun-armed turret with a fixed superstructure featuring three vision ports, as well as an antenna for the FuG.2 and FuG.6 radio sets contained inside the hull. There was no machine gun mounted in the hull so it was relatively defenseless. This 5.88-ton vehicle operated by a crew of three was known as the Leichte (Funk) Panzerwagen.

This 1/35 scale Smart Kit builds upon the exquisite detail contained in Dragon’s previous Panzer I models. As to be expected, the superstructure is a brand new part, as is the attached antenna. For customization, this antenna can be depicted at any angle according to the modeler’s wishes. The antenna guard frame on the front right fender is also a brand new element and it’s molded finely to give a scale appearance. The fighting compartment is fully portrayed, including the transmission and radio sets. For greater convenience and speed of assembly, this kit uses Magic Tracks in place of individual track links. There is also a useful amount of photo-etched metal components like the muffler cover and rings for detailing the road wheels. The Leichte (Funk) Pz.IA may be small but it’s most certainly a ‘funky’ model!

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:35 Red Devils w/Welbike Drop Tube Cont

Art.-Nr.: 500776585

Art.Nr.: 500776585 Artikelbezeichnung: 1:35 Red Devils w/Welbike Drop Tube Cont

Die heftigen Kämpfe, die in Arnheim während der Operation Market Garden (17. - 25. September 1944) im Zweiten Weltkrieg stattfanden, wird für immer in den Geschichtsbüchern der britischen „Red Devils" bestehen bleiben. Die gesamte 1. Airborne Division mit mehr als 10.000 Streitkräften, war dafür vorgesehen, die Brücke von Arnheim in den Niederlanden zu erobern und zu halten, bis die Alliierten diese erreichten. Leider blieb die Hauptattacke stecken, sodass die „Red Devils" ohne Unterstützung kämpfen mussten. Fallschirmjäger, einige von Ihnen nur mit Ihren Kampfmessern ausgestattet, kämpften, bis der letzte Funkspruch gesendet wurde: „Out of Munition. God save the king!" Am Ende verteidigten weniger als 1000 britische Fallschirmjäger mit einer erstaunlichen Tapferkeit eine Seite der Brücke gegen die schweren feindlichen Angriffe mehr als doppelt so lange wie ursprünglich vorgesehen.

An diese berühmte Schlacht erinnert das neue Figuren-Set im Maßstab 1:35 von Dragon mit der Bezeichnung „Red Devils mit Welbike Fallrohr-Container (Arnheim 1944)". Die Box enthält ein Premium Edition Set, d.h. es enthält bereits veröffentlichte Figuren. Dennoch wurde dieser spannende Artikel um ein neues Welbike erweitert, einem kompakten britischen Motorrad, das speziell für verdeckte Operationen entwickelt wurde. Insgesamt wurden 3853 Welbikes im Zweiten Weltkrieg gefertigt, von denen sehr viele in der Operation Market Garden zum Einsatz kamen. Das 1:35 Modell des Bikes wurde sorgfältig bis ins kleinste Detail reproduziert, und es stellt ein neues Herzstück für jede Szenerie dar. Das Set enthält vier fein geformte Figuren in Kampfhaltung, einschließlich zahlreicher persönlicher Ausrüstungsgegenstände. Außerdem ist ein Fallschirm-Abwurfbehälter enthalten. Mit diesem Figuren-Set von Dragon können Modellbauer diese berühmte Schlacht in der Geschichte des Fallschirmjäger-Regiments nun noch dramatischer nachstellen.

Detaillierter Plastikmodellbausatz

1:35 German Infantry Barbarossa 1941

Art.-Nr.: 500776580

Art.Nr.: 500776580 Artikelbezeichnung: 1:35 German Infantry Barbarossa 1941

Der 22. Juni 1941 war ein bedeutender Tag in der Weltgeschichte. An diesem Tag stürmten Tausende und Abertausende von deutschen Truppen über die Grenze, um mit der Invasion der Sowjetunion zu beginnen. An dieser als Operation Barbarossa bekannten ehrgeizigen militärischen Mission waren 3,9 Millionen deutsche Soldaten beteiligt, die von 600.000 Fahrzeugen und 750.000 Pferden begleitet wurden! Es bleibt die größte militärische Operation in der Geschichte der Menschheit sowohl in Bezug auf die Anzahl der Personen als auch im Hinblick auf die damit verbundenen Verluste. Die deutsche Seite konnte in den ersten Tagen einige bemerkenswerte Siege erzielen, bei denen 3 Millionen russische Kriegsgefangene gemacht wurden. Allerdings verlor die Operation an Schwung und geriet vor den Toren der russischen Hauptstadt Moskau ins Wanken. Das neueste Modell von Dragon im Maßstab 1:35 stellt deutsche Soldaten der Operation Barbarossa im Jahre 1941 dar.

Das Set besteht aus vier deutschen Infanteristen in den frühen, siegreichen Tagen der Invasion. Obwohl sie für einen bestimmten Zweck, den ein Modellbauer im Auge hat, voneinander getrennt werden können, wurden die vier Figuren entworfen, um zusammen bei einem Angriff auf russische Stellungen zu agieren. Dies ist genau die Szene, die so häufig vorzufinden war, als die deutschen Infanteriedivisionen über die endlosen Steppen Russlands vorrückten. Einer der Soldaten feuert sein Gewehr aus einer knienden Position ab, während ein anderer sein Gewehr nachlädt. Ein weiterer macht sich bereit, eine Granate zu werfen. Ein Unteroffizier feuert eine Signalpistole ab, um den Beginn des Angriffs zu signalisieren. Dabei ist die Kartusche offen. Alle tragen die typischen Uniformen dieser Zeit. Von besonderem Interesse sind die Gummibänder am Helm eines Soldaten, mit denen Tarnmaterialien befestigt sind. Unter der großen Auswahl an deutschen Figuren im Maßstab 1:35 gibt es eigentlich nicht viele, die Soldaten aus die

Detailierter Plastikmodellbausatz des Modells German Infantry Barbarossa 1941 im Maßstab 1:35

1:35 Pz.Kpfw. IV Ausf. J Last Production

Art.-Nr.: 500776575

Art.Nr.: 500776575 Artikelbezeichnung: 1:35 Pz.Kpfw. IV Ausf. J Last Production

The Panzer IV was the mainstay tank of Germany during WWII, with nearly 9,000 produced. It was successively improved throughout its lifetime in the areas of armament and armor, resulting in a number of variants. Interestingly, the final version of this tank was the Ausf.J, which could be considered somewhat as a retrograde design compared to the preceding Ausf.H. This is because the design needed to be simplified to speed up production in order to replace heavy combat losses. Main changes included the removal of the electric turret traverse system, with the turret having to be turned manually. The space was taken up with an auxiliary 200-liter fuel tank that increased the road range to 320km. Pistol and vision ports were removed, while the side skirts were replaced by wire mesh screens. A total of about 435 Panzer IV Ausf.Js were produced in 1945.

Dragon has released a number of 1/35 scale kits of the Panzer IV family, and now comes the most anticipated version of all – a Panzer IV Ausf.J Last Production. Almost all of the components for this tank come from brand new moldings, including upper hull, chassis and side skirts. The side skirts themselves are items worthy of comment. Up till now, this type of side skirt made use of nylon mesh that unfortunately didn’t look wholly authentic. However, this model uses metal mesh that precisely mimics the original. Details on this kit are of the finest standard, and as a Smart Kit it is finely engineered. To make it even more desirable, Ron Volstad has created the stunning box art for this kit. Thanks to the subject and the high standard of this kit, this new Panzer IV Ausf.J variant is a must-have for modelers.

Detaillierter Plastikbausatz des Modells Pz.Kpfw. IV Ausf. J Last Production im Maßstab 1:35 Smart Kit

1:35 FLAK 38 Late Production m. Sd.Ah.51

Art.-Nr.: 500776546

Art.Nr.: 500776546 Artikelbezeichnung: 1:35 FLAK 38 Late Production m. Sd.Ah.51

Merkmale: - Neue Handräder zur Einstellung des Geschützes - Optionaler Schützensitz neu hergestellt - Bonus: fotogeätzte Schützenblende - Geschützblende ist gegossen, um eine maßstabsgetreue Stärke zu erzielen - Patronenlager sehr detailreich: selbst die Schweißnähte sind nachgebildet - Turmzielfernrohr mit definierten Details - Geschütz kann je nach Wunsch des Modellbauers in eine der vier Positionen angehoben werden (0°, 20°, 40° und 60°) - Runde Grundplatte mit authentischen Details - Präzise Schweißnähte an den Seiten der Geschützplattform - Schiebergeformte Wechsellaufgehäuse (sogar mit geformtem Wechsellauf) - Drei Geschützrohr-Arten (Standardmodell, spätes Modell und Schwebelafetten-Version) können montiert werden - Schiebergeformter Geschützlauf mit hohler Mündungsöffnung - Lochpositionen und Form des Mündungsfeuerdämpfers & Mündungsbremse subtil dargstellt - Trailer kann beim Transport oder „im Ruhe-Modus" dargestellt werden - Trailer mit definierten Details - Anziehende Handräder rund um die Plattform-Basis mit genauen Details - Anziehende Handräder können mit zwei zusätzlichen Fotoätzteilen versehen werden - Gebrauchter Hartschalenrahmen sowie fotogeätztes Netz im Lieferumfang enthalten - Gebrauchte Hartschale aus vorgeformten Fotoätzteilen - Werkzeugkasten mit Verschlussdetails aus Schieberformen - Schiebergeformte Munitionsschellen x 4 - Detaillierte schiebergeformte Munitionskisten x 2 - Optionale vorgeformte fotogeätzte Geschützblende

Die Flugabwehr wurde mit dem Aufkommen von leistungsfähigen Luftstreitkräften im Zweiten Weltkrieg sehr wichtig. Deutschland setzte eine Reihe von Flugabwehr-Plattformen ein, wobei die niedrige Flugabwehr mit Waffen wie der Flak 30 (Flugabwehrkanone 30) und FlaK 38 erfolgte. Erstgenannte wurde 1935 eingeführt, die andere ersetzte diese im Jahr 1939. Diese Reihe der 2 cm Flak-Waffen war die

Detaillierter Plastikmodellbausatz

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:35 "Hummel-Wespe" le Pz.Haub

Art.-Nr.: 500776535

Art.Nr.: 500776535 Artikelbezeichnung: 1:35 "Hummel-Wespe" le Pz.Haub

‘Bumble Bee’ might seem an unusual nickname for a self-propelled howitzer, but that is what the Germans initially called their 15cm sFH 18 L/30 howitzer mounted on a Panzer IV chassis. The Sd.Kfz.165 Hummel, of which 714 were produced from late 1942 onwards, was created because of an urgent need for artillery that could keep pace with Germany’s panzers during WWII. Interestingly, the prototype of the Hummel was originally fitted with a 10.5cm leFH18 gun, the weapon that eventually found its way onto the Wespe that was based on the Panzer II chassis. Dragon’s newest 1/35 scale kit shows this "Hummel-Wespe" le Pz. Haub auf Hummel Fahrgestell armed with the 10.5cm howitzer.

Dragon has produced the standard Hummel before, but this kit has the smaller gun. Stil based on Dragon’s phenomenally detailed Panzer IV chassis and hull, this new 1/35 scale kit includes a retooled fighting compartment that had a unique arrangement due to the smaller size of the 105mm artillery rounds. The ammo storage racks are thus also new. Also newly tooled is the gun shield, since it isn’t the normal one associated with the leFH18 howitzer. The armor plates of the fighting compartment have been made using Dragon’s ‘Razor Edge’ technique to give a true-to-scale appearance. In this special fighting-vehicle kit, Dragon offers something unique and something different from the norm – a Hummel-Wespe hybrid!

Detailierter Plastikmodellbausatz des Modells Sd.Kfz.165 Hummel-Wespe (Smart Kit) im Maßstab 1:35

1:35 Winter Tank Riders 1943-44

Art.-Nr.: 500776513

Art.Nr.: 500776513 Artikelbezeichnung: 1:35 Winter Tank Riders 1943-44

Die Kolonne der schlammbespritzten Panzer-IV-Fahrzeuge hat sich ihren Weg durch die zerfurchten Waldwege an der Ostfront gebahnt. Auf ihrem Weg durch das verschneite Gelände ertönte das raue Brummen der Panzermotoren und das Klirren der Ketten. In den Panzern befanden sich entkräftete deutsche Soldaten, die erschöpft ihrer nächsten Schlacht entgegensahen. Bis zur nächsten Schlacht breiteten sie sich, dankbar, dass sie im Panzer fahren konnten, in ihren dreckverkrusteten Uniformen auf dem Rumpf der Panzer aus.

Szenen wie diese sind ein häufiges Bild auf Fotos und in Wochenschaubeiträgen aus der Zeit des zweiten Weltkriegs. Dank dem neuesten Satz mit 1:35-Figuren können Modellbauer diese Szenen nachstellen. Der Figurensatz mit dem Titel 'Panzerfahrer im Winter 1943-44' umfasst vier Einzelfiguren, die so nachgebildet und ausgearbeitet wurden, dass sie auf den Panzerkasten eines Panzer IV passen. Dies macht die Figuren zu einem idealen Zubehör für den kürzlich von Dragon herausgebrachten Panzer IV Ausf. H (Artikelnummer 6300). Die Panzergrenadiere sind mit ihren Parkas oder Mänteln für die Schlacht an der bitterkalten und hart umkämpften Ostfront ausgerüstet. Die Kapuzen der Mäntel und Parkas setzen sich sogar aus verschiedenen Teile zusammen, was eine exaktere Darstellung der Kleidungsstücke ermöglicht. Bei diesem Figurensatz handelt es sich nicht um Figuren der Reihe Gen2, doch die Details dieser Figuren sind nicht weniger spektakulär. Jede Figur besteht aus verschiedenen Teilen, die sich zu einer Figur in komplexer und lebensechter Pose zusammensetzen lassen. Details wie z.B. die Definition der Uniform, der persönlichen Ausrüstung und der Gesichtszüge sind präzise definiert. Jede dieser Posen spiegelt die eisige Szenerie der Schlacht in der Zeit von 1943-44 wider. Ein unverzichtbares Zubehör für Modellbauer, die ihre Panzer IV-Fahrzeuge mit Soldaten bestücken wollen.
 

1:35 M4 Sherman 75mm Normandy

Art.-Nr.: 500776511

Art.Nr.: 500776511 Art.bezeichnung: 1:35 M4 Sherman 75mm Normandy

The Allied D-Day landings on 6 June 1944 marked the first successful opposed landings across the English Channel in nine centuries. The massive assault on Hitler’s much-vaunted Atlantic Wall was also the largest single-day amphibious invasion of all time. A total of 130,000 soldiers went ashore on 6 June, while a million men had been landed in this sector of northern France within a month. These Allied soldiers were supported by all sorts of armored vehicles, with the ubiquitous M4 Sherman tank being chief among them. Dragon’s newest 1/35 scale kit portrays just such an M4 tank that participated in the Normandy campaign. Modelers will need to take note that this is much more than just another Sherman kit, for it has been specifically designed as a Normandy veteran!

The M4 variant, powered by a Continental radial engine and armed with a 75mm main gun, was deployed by American, British, Polish and Canadian units. This broad range of users in the tense battles for Normandy opens up new possibilities for modelers of this kit. This exciting new release, the first from Dragon in 2009, shows a welded-hull variant. This kit has received many new parts and extensive retooling to accurately replicate particular M4 characteristics like the thickened armor plates on the turret sides. Newly tooled components include a slide-molded upper hull, turret, engine deck and rear engine-compartment doors. The T51 tracks made from DS are also brand new. Multimedia parts such as photo-etched sand-shield brackets and engine ventilator covers are also included. For modelers wishing to depict a Sherman fighting through the thick Normandy hedgerows and bocage, or dueling with Panthers and Tigers of desperate German defenders, this kit is a dream come true!

Detaillierter Plastikmodellbausatz des Modells M4 Sherman 75mm Normandy im Maßstab 1:35

1 2 3
nach oben