Trier selon:

Meilleures ventes
  • Meilleures ventes
  • Nouveautés
  • Prix croissant
  • Prix décroissant
Filtrer

Filtrer
Prix
Catégorie
Marque
Marques & licences
Échelle
Italeri 1:72 M163 VULCAN

Maquettes de véhicules militaires 1/72

1:72 M163 VULCAN

510007066

€13.99

Article number: 510007066 Product: 1/72 M163 VULCAN Model Dim.: 6,7 cm Decals for 4 versions Due to its low cost and great reliability the troop carrier M113 presented itself as a valid base for various anti-tank weapons systems such as TOW missiles or an anti-aircraft gun such as this version. The M163 was developed around a 20 mm gun "Vulcan". Rotating barrels (with a rapid fire power of 6000 rounds per minute) were created for anti-aircraft use. The whole system is based on a simple, open turret with the munitions loaded on the inside of the vehicle. The M163 is not only used for anti-aircraft defense, but also as infantry ground support vehicle because of its enormous fire power.

Plus
Italeri 1:72 Sd.Kfz.305 Ambulance

Maquettes de véhicules militaires 1/72

1:72 Sd.Kfz.305 Ambulance

510007055

€12.79

Article number: 510007055 Product: 1/72 Sd.Kfz.305 Ambulance Model Dim.: 8,2 cm Decals for 4 versions The Opel Blitz medium truck was used extensively by the German Army on all fronts during World War Two. Several thousand of them were produced. They were also used as platforms for antiaircraft weaponry and tanker, workshop and ambulance versions were made. Of sturdy construction and easy to maintain, it also featured good off-road performance which made it invaluable in both the Russian and African campaigns.

Plus
Italeri 1:72 US M12 GMC Howitzer

Maquettes de véhicules militaires 1/72

1:72 US M12 GMC Howitzer

510007076

€16.49

Article number: 510007076 Product: 1/72 US M12 GMC Howitzer NEW DECAL SHEET The self-propelled gun CMG M12 was used during the Second World War by the U.S. Army. It was developed on the hull of the M3 Lee / Grant tank on which was installed a 155 mm gun. The main armament, the ammunitions and the gun crew were located in an open topped area at the back of the vehicle. Only the driver's seat was protected. To absorb the effects of the recoil when using the artillery piece, the M-12 was equipped with a rear blade that was lowered and fixed into the ground.

Plus
Carson 1:24 Jeep Willys MB 80th Anniversary

Maquettes de véhicules militaires 1/24 ; 1/48

1:24 Jeep Willys MB 80th Anniversary

510003635

€39.99

Article number: 510003635 Product: 1:24 Willys Jeep MB "80th Anniversary" In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multipurpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II. Even after 80 years, the "Willys" is still considered today, to be the four-wheeled vehicle which is most symbolic of the American army during the Second World War, and thanks to its enthusiasts and collectors, there are many examples of the jeep, still in perfect working order. Detailed plastic kit

Plus
Carson 1:24 M-24 “Chaffe” Korean War

Maquettes de véhicules militaires 1/35

1:24 M-24 “Chaffe” Korean War

510006587

€34.99

Article number: 510006587 Product: 1:24 M-24 "Chaffe" Korean War The M24 Chaffee was deployed to US Army armoured battalions from 1944 onwards to provide a light battlefield tank that could effectively replace the older M3 / M5 Stuart. The configuration of the M-24 was superior to its predecessor in so many ways that it can be considered one of the foremost light tanks that were ever produced. Agile, robust and reliable, it had as its main armament a 75mm M6 cannon with 48 rounds available, a very powerful version indeed of a "light tank". The tank’s armament was complete with its two 12.7 mm Browning machine guns. Following the conclusion of the Second World War, where it’s capabilities had been fully demonstrated, it participated in the Korean War providing support to M4 Sherman tanks and the heavier M26 Pershing. It was also effectively utilised in advanced reconnaissance roles or providing close infantry support. Detailed plastic kit in scale 1:24

Plus
Italeri 1:35 1/4 Ton 4x4 Ambulance Jeep

Maquettes de véhicules militaires 1/35

1:35 1/4 Ton 4x4 Ambulance Jeep

510000326

€11.99

Article number: 510000326 Product: 1:35 1/4 Ton 4x4 US Ambulance Vehicle Model Dim.: 11,8 cm Decals for 2 versions The ubiquitous jeep is perhaps the most all-round vehicle ever constructed. Because it xas ruggedly built and thus able to traverse most types of terrain without suffering structural damage, one of the task assigned to the jeep was that of ambulance service.

Plus
Italeri 1:35 4x4 Modern Military Verhicle

Maquettes de véhicules militaires 1/35

1:35 4x4 Modern Military Verhicle

510106504

€51.99

Référence article: 510106504 Article: 1:35 4x4 Modern Military Verhicle Le véhicule léger multirôle LMV Lince, produit par l’entreprise italienne Iveco, a été développé pour synthétiser toutes les caractéristiques principales requises à un engin blindé léger de dernière génération. En effet, le système de suspensions avant et arrière indépendantes garantit une excellente performance sur tous types de sol et dans toutes conditions opérationnelles. La structure du Lince assure un bon niveau de protection contre le feu des armes légères et contre tout éclat. La structure de la cellule de sécurité interne et des plaques de renforcement réduit sensiblement les dommages produits par les mines ou par des explosions plus puissantes. Le Lince se présente donc comme un engin idéal pour effectuer des missions d’exploration, desserte et transport tactique de troupes. Par ailleurs, il a été développé pour présenter une grande polyvalence d’utilisation ainsi qu’une facilité d’installation. Employé principalement par l’Armée Italienne, il a reçu un bon succès commercial dans différents Pays.

Plus
Italeri 1:35 BMW R 75 with Side Car

Maquettes de véhicules militaires 1/35

1:35 BMW R 75 with Side Car

510000315

€12.79

Article number: 510000315 Product: 1:35 BMW R 75 with Side Car Model Dim.: 6,6 cm Contains 3 figures. Decal for one version. The new German army made use of the experiences collected in World War I to realize their modern reconstruction based on motorization. In spite of the limitations of the Treaty of Versailles able commanders introduced civilian vehicles into the army, thus creating a motorized mentality. In 1940 already, a battalion consisting of 3 to 4 companies each equipped with 52 motorcycles with sidecars and 4 motorcy-cles (single), was integrated into the motorized infantry and the armored divisions. Moreover, motorcycles were present in nearly all other Wehrmacht units, especially with the reconaissance units and the command, as well as the pioneer and the supply units. Produced in 16.500 units, the BMW R 75 together with the Zijndapp KS 750 formed the nucleus of the motorized units on all theatres of operations, especially in Africa and in Russia. The motorcycle was armored with an MG 34 mounted on the sidecar. On the road, it reached a maximum speed of 92 Km/h.

Plus
Italeri 1:35 Commando Car

Maquettes de véhicules militaires 1/35

1:35 Commando Car

510000320

€12.79

Article number: 510000320 Product: 1/35 Gefechtswagen Model Dim.: 9,5 cm 1 FIGURE INCLUDED Much work was carried out in the USA and Britain to design special airborne vehicles to drop behind the enemy lines. Willys MB-Jeeps engaged in helping the Infantry by clearing snipers and other commando tasks. Generally manned by a sergeant and a trooper this vehicle was modified in many respects. It was armed with no fewer than five machine guns and had additional tanks for 135 l. of fuel.

Plus
Carson 1:35 Crusader Mk.II m. Inf. Fig. (5)

Maquettes de véhicules militaires 1/35

1:35 Crusader Mk.II m. Inf. Fig. (5)

510006579

€39.99

Article number: 510006579 Product: 1:35 Crusader Mk.II m. Inf. Fig. (5) Model Dim.: 17,1 cm CONTAINS 5 FIGURES - NEW GLUABLE RUBBER TRACKS - DECALS SHEET FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET Designed at the beginning of the Second World War, the Crusader was one of the most important British "Cruiser" tanks reaching a production of over 5,000 units. Equipped with Christie suspension with large diameter rolling wheels, the Crusader possessed remarkable driving skills on rough terrain. The first versions of Mk. I and Mk. II were armed with a 2 pdr. cannon, later replaced by the more powerful 6 pdr. cannon in the Mk.III version. Lacking adequate armor against enemy fire, it was also very vulnerable to enemy mines and anti-tank guns, and its armament was often inadequate in front of similar German vehicles. However, when used in a coordinated way, they managed to achieve good results. The Crusaders Mk. II, with the arrival of the more powerful Mk.III, were already relegated to second-line duties at the time of the battle of El Alamein. Detailed plastic kit in scale

Plus
Carson 1:35 Dt. Pz.Kpfw. IV KwK 40L/48

Maquettes de véhicules militaires 1/35

1:35 Dt. Pz.Kpfw. IV KwK 40L/48

510006578

€39.99

Article number: 510006578 Product: 1:35 Dt. Pz.Kpfw. IV KwK 40L/48 The Panzer IV was deployed for the entire duration of WW2 by the Wehrmacht and benefited from frequent updates. It acquired the status of being known as the "backbone" of the Panzer Divisions on all operational fronts. The Panzer IV Ausf H which came into service from mid-1943, was improved in its offensive capability by the adoption of the 75 mm L / 48 KwK 40 cannon, which was characterized by greater penetrative capability and overall general effectiveness against enemy armoured vehicles. A technical innovation entitled Schürzen, was applied to the tank design which afforded additional sheet metal protection to the sides of the hull and around the turret. This in turn provided greater protection against enemy hits and reduced damage to the Panzer. This addition of further side protection was often linked to the use of Zimmerit, a cement-based paste that was applied to the armour. Detailed plastic kit

Plus
Carson 1:35 Dt. Pzkpfw.IV F1/F2/G m. DAK Fig.

Maquettes de véhicules militaires 1/35

1:35 Dt. Pzkpfw.IV F1/F2/G m. DAK Fig.

510006593

€35.99

Article number: 510006593 Product: 1:35 Dt. Pzkpfw.IV F1/F2/G m. DAK Fig. The Panzer IV was the most extensively used German tank during the Second World War. It represented the "backbone" of the German Panzer Divisions on all operational theaters. The production of Panzer IV Ausf. F, started in 1941, marked a decisive boost in the evolution of the tank. It featured an improved armor on the turret and hull. The first version of Panzer IV F, featuring the traditional 7.5 cm. KwK 37 short-barreled cannon, were not able to fight successfully against the Soviet T-34 and KV-1 heavy armored tank. The adoption of the anti-tank design KwK 40 long-barreled cannon, on the Ausf. F2 version, has decisively increased the Panzer IV effectiveness against enemy tanks. Thanks to its new high velocity and high penetration gun, the Panzer IV became, once again, "lethal" on the battlefields. They were used, albeit in limited numbers, with the 15th and 21st Panzer Divisions on the North African front. Detailed plastic kit

Plus
Carson 1:35 Dt. Sd.Kfz. 232 6-Rad

Maquettes de véhicules militaires 1/35

1:35 Dt. Sd.Kfz. 232 6-Rad

510006433

€26.99

Article number: 510006433 Product: 1:35 Dt. Sd.Kfz. 232 6-Rad The heavy armored car Sd. Kfz. 232 (Schwere Panzerspähwagen 232) was deployed by Wehrmacht units in the mid thirties. The eff ective management of reconnaissance and radio communications between units was an essential feature of rapidly moving military operations known as "blitzkrieg". The armored car Sd.Kfz. 232 was a key component in meeting this need. The mobility of the six w heeled vehicle, both on and off road, was complemented by enhanced radio communications equipment which was equally effective over both short and long range. The armored car was fitted with a voluminous antenna frame which was then later replaced with a ve rtical antenna that ensured effective battlefield communications between commanders and troops. The turret armament provided sufficient firepower for both vehicle defence and on advanced reconnaissance missions. Detailed plastic kit in scale 1:32

Plus
Carson 1:35 Dt. Sd.Kfz.138 Marder III Ausf. H

Maquettes de véhicules militaires 1/35

1:35 Dt. Sd.Kfz.138 Marder III Ausf. H

510006566

€30.49

Article number: 510006566 Product: 1:35 Dt. Sd.Kfz.138 Marder III Ausf. H The tank destroyer Marder III Sd.Kfz. 138 was developed for the Wehrmacht on the basis of the now obsolete Czechoslovak-made Panzerkampfwagen 38(t). It went into production in 1942 for the needs of the eastern operation area and was used on all fronts until the end of the war. A major improvement was the installation of an effective 75 mm anti-tank gun protected by a slanted steel shield. In order to better protect the soldiers, the engine was placed in the rear part of the vehicle and the weapon system in the middle. With the Marder III, the Wehrmacht had an easy-to-manufacture tank destroyer with high firepower that was capable of fighting the most important tanks of the time. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Plus
Carson 1:35 Dt. SdKfz. 234/2 Puma 8-Rad

Maquettes de véhicules militaires 1/35

1:35 Dt. SdKfz. 234/2 Puma 8-Rad

510006572

€35.49

Article number: 510006572 Product: 1:35 Dt. SdKfz. 234/2 Puma 8-Rad The German armored car ‘Schwerer Panzerspähwagen Sd.Kfz. 234/2’ known as "Puma", was developed and produced by the German war machine in the closing years of WW2. The vehicle proved to be an excellent mix of mobility, protection and firepower which was built upon the operational experience gained by the Wehrmacht in the early stages of the conflict. From 1939 onwards the German army had used armored vehicles very effectively for advanced reconnaissance tasks, and also in a ground support role for its troops. The "Puma" was initially a reconnaissance vehicle, but due to its KwK 39 L / 60 50 mm gun it could also be used equally effectively in offensive actions against infantry and other armored vehicles. It was deployed in limited numbers on both the Eastern and Western fronts. The highly effective independent suspension system of the eight wheels and the powerful engine, enabled the Puma to reach speeds of up to 90 km/h on all types of battlefield terrain. Detailed plastic kit in scale 1:35

Plus
Carson 1:35 Fiat 508 CM Coloniale m. Fig.

Maquettes de véhicules militaires 1/35

1:35 Fiat 508 CM Coloniale m. Fig.

510006550

€25.99

Detailed plastic kit in scale 1:32

Plus
Italeri 1:35 Gal.S TankTrailer+M101 KargoTrailer

Maquettes de véhicules militaires 1/35

1:35 Gal.S TankTrailer+M101 KargoTrailer

510100229

€14.29

Article number: 510100229 Product: 1:35 Gal.S TankTrailer+M101 KargoTrailer For the supply of front line troops or in maneuvers activities trailers were hauled by GMC 2 ½ ton trucks or water trucks as well as Dodge Command cars or even by Ambulance Trucks. These trailers standard equipment of the U.S. Army and its allies. Decals for one version

Plus
Carson 1:35 Ger. Panzerjäger I

Maquettes de véhicules militaires 1/35

1:35 Ger. Panzerjäger I

510006577

€32.49

Article number: 510006577 Product: 1:35 Ger. Panzerjäger I Model Dim.: 12,6 cm NEW GLUEABLE RUBBER TRACKS - DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET - PHOTO-ETCHED FRET CONTAINS 1 FIGURE The self-propelled Panzerjager I tank destroyer was built on the hull of the Panzer I light tank and armed with an effective weapon of the period, the 47mm Czechoslovakian anti-tank gun. The Panzer I tank had in fact a protection and armament capability no longer in keeping with the operational needs of the German armoured divisions. However, it had good mobility and a robust chassis which was ideal for the positioning of the anti-tank gun, which was sited behind an open steel shield. The Panzerjager I was deployed by the Wehrmacht during the invasion of France, in North Africa and in the early stages of Operation Barbarossa in 1941. It held a goodammunition supply, with over 70 rounds available for gunners. It was systematically replaced during the war bymore heavily armored tank destroyers, better equipped to deal with modern tank armor against which the 47 mm gun proved to be ineffective. Detailed Plastic Kit

Plus
Italeri 1:35 German Truck 3to. TYPE S

Maquettes de véhicules militaires 1/35

1:35 German Truck 3to. TYPE S

510000216

€28.49

Article number: 510000216 Product: 1/35 German Truck 3to. TYPE S Model Dim.: 17,1 cm Registered by the Wehrmacht under the designation LKW 3,6-36 S 3t Blitz, this truck was the typical example of that practice of unification adopted in 1938 for the construction of civil transport means convertible into military vehicles. Actually, this truck - OPEL without BLITZ - was manufactured for commercial use featuring more or less the same characteristics.

Plus
Italeri 1:35 HEMTT Gun Truck

Maquettes de véhicules militaires 1/35

1:35 HEMTT Gun Truck

510106510

€42.99

Article number: 510106510 Product: 1:35 HEMTT Gun Truck Model Dim.: 28,0 cm FULLY UPGRADE MOULDS Decals for one version The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. In a lot of conflicts, as in Iraq and Afghanistan, it has been often modified by the field workshops, on the specific requirements of the crews, in order to be more and more effective in the hard operating environments, Furthermore some HEMTT versions have been modified to be used in escort and convoys protection duties. Some additional protections and defensive weapons have been add on.

Plus
Italeri 1:35 IT Land Rover 109´ LWB

Maquettes de véhicules militaires 1/35

1:35 IT Land Rover 109´ LWB

510106508

€15.49

Article number: 510106508 Product: 1:35 Land Rover 109´ LWB Model Dim.: 12,5 cm Decals for 2 versions The "Land Rover" was certainly one of the most famous symbols of "Made in England" on four wheels and is a real milestone in the history of the off road vehicles. Born after the war, with the first prototypes done in 1947, to meet both civilian and military tasks. Inspired, though not directly, to the American Jeep, was characterized by a 4x4-wheel drive and a strong and reliable frame to tackle, with success, the most difficult and demanding trails. The aluminum body made it lighter, but at the same time, more resistant to corrosion and long lasting. In 1971, when the Series III was introduced, it had already been produced and made more than a million units for both civilian and military uses. Also available in 88 inches "standard wheel base", or in 109 inches "long wheel base".   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Plus
Italeri 1:35 IT WW2 PzKpfw.VI Tiger I Ausf.E mP.

Maquettes de véhicules militaires 1/35

1:35 IT WW2 PzKpfw.VI Tiger I Ausf.E mP.

510006507

€38.49

Article number: 510006507 Product: 1:35 IT PzKpfw.VI Tiger I Ausf.E mP. Model Dim.: 24,1 cm - UPGRADED MOULDS - - Figure not included - Parts for two variants - Photo-etched fret and link by link tracks included - Decals for 4 versions The Tiger I tank, which has been produced in the second half of 1943, was based on the hull of the firstoperational version used in North Africa and Russia. At the beginning this tank had wheels with rubber rim,which will be replaced in the following productions starting from February 1944, but it was equipped withthe new turret with increased protection and better cupola for the commander. Besides some of thesevehicles maintained the characteristic system of dust filters Feifel, and the smoke grenade launchers. On thetanks produced since August 1943 was also applied a magnetic mine paste that will become standard on alltanks of the German Army.

Plus
Italeri 1:35 Kangaroo

Maquettes de véhicules militaires 1/35

1:35 Kangaroo

510006551

€31.49

Article number: 510006551 Product: 1:35 Kangaroo Personal Carrier Length of the model 172 mm NEW DECALS SHEET – FIGURES NOT INCLUDED During the Africa campaign, the British Army used some Stuart light tanks, without the turrets, as armoured personnel carriers or as artillery tractors. Later on, to overcome the shortage of armoured vehicles, the Canadian General Guy Simonds ordered to the field workshops to remove the howitzers from the old M7 Priest and to convert them into infantry transport vehicles. Thanks to the positive results came out from the initiative among the Commonwealth troops, a lot of old tanks have been converted in "Kangaroo". Kangaroo was the nickname given to the modified vehicles able to perform the transportation of fully equipped soldiers directly close to the enemy line. The defensive armament could be vary and it depended on the availability of weapons as the .50 or .030 Browning machine guns and the Boys anti-tank rifle. Detailed Plastic Kit

Plus
Italeri 1:35 Kfz. 69 Schwimmwagen

Maquettes de véhicules militaires 1/35

1:35 Kfz. 69 Schwimmwagen

510000313

€13.29

Article number: 510000313 Product: 1/35 Kfz. 69 Schwimmwagen Model Dim.: 10,9 cm including 3 figures Decals for one version As the Volkswagen 82 (Kubelwagen) proved very successful during the campaign in Poland, it was necessary to produce everincreasing numbers of this vehicle. Later, Ferdinand Porsche developed an amphibian version of this car, called the Schwimmwagen. The light weight of this vehicle (about 1/2 ton) permitted crossing of muddy areas, since only two men were sufficient to keep this vehicle moving. For reconnaissance and liaison missions, water had to be crossed frequently, which was impossible with other vehicles.

Plus
Italeri 1:35 Land Rover 109 "Guardia Civil"

Maquettes de véhicules militaires 1/35

1:35 Land Rover 109 "Guardia Civil"

510006542

€20.49

Article number: 510006542 Product: 1:35 Land Rover 109 "Guardia Civil" Model Dim.: 12,5 cm UPGRADED MOULDS Decals for 3 versions The Land Rover was certainly one of the most famous symbols of "Made in England" automobile production and is a real milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes realized on 1947. It has been characterized by the 4x4 traction system and by a robust and reliable design able to tackle the most difficult and challenging trails. The aluminum body provide lightness but, at the same time, more resistance against corrosions and more durable in time. In 1971, when the III Series was introduced, more than 1,000,000 of Land Rovers has been produced. Available in two versions: the "standard" one and the "long wheel base". Thanks to its extraordinary versatility was used in both military and civilian duties, and was also produced under license by the Spanish Motor Company Santana during the 70s. Detailed Plastic Kit of model Land Rover 109 "Guardia Civil" in scale 1:35

Plus
Carson 1:35 M-109/A2-A3G Howitzer

Maquettes de véhicules militaires 1/35

1:35 M-109/A2-A3G Howitzer

510006589

€34.99

Detailed plastic kit in scale 1:32

Plus
Carson 1:35 M1 155mm Howitzer with crew

Maquettes de véhicules militaires 1/35

1:35 M1 155mm Howitzer with crew

510006581

€26.49

Article number: 510006581 Product: 1:35 M1 155mm Howitzer with crew Model Dim.: 20,9 cm With Artillery Crew - 6 figures included In the years leading up to World War II, the United States undertook a complete modernization of the army's artillery capabilities to increase their efficiency and effectiveness. Whilst great attention was paid to ammunition and artillery trailers, one outcome of this modernization project was the development of the 155/23 howitzer. It was first produced in 1942 as a medium artillery piece and served the US Army throughout the Second World War. It could use different types of ammunition and had a maximum range of 14,600 meters. Very robust and reliable, it also proved to have good operational longevity. It was in fact used by the U.S. Army post WW2 during the Korean War, and indeed during the Vietnam War before eventually being replaced by the more modern M198. Detailed plastic kit in scale 1:35

Plus
Italeri 1:35 M110 Self Propelled Howitzer

Maquettes de véhicules militaires 1/35

1:35 M110 Self Propelled Howitzer

510006574

€32.99

Article number: 510006574 Product: 1:35 M110 Self Propelled Howitzer Model Dim.: 25,8 cm Decal for 1 versions The self-propelled guns of the M-110 series have represented, for many years, the backbone of the field artillery of the United States Army. They were also largely used by the American Allied Countries. It entered service in the ‘60s but thanks to the improvements made in 1977 on the M-110 A1 version, it acquired improved operational efficiency. The M-110 A1 was armed with the new 203 mm long range M201 gun able to use a wide range of ammunitions. The project was characterized by an excellent mix in terms of firepower and mobility thanks to its reliable chassis (the same of the M-107). The M-110 A1 was deployed in the division artillery to perform tasks as general support, counter-battery fire and suppression of enemy positions. It was widely used during the conflict in Lebanon and during the first Gulf war. Detailed Plastic Kit

Plus
Italeri 1:35 M32 Recovery Vehicle

Maquettes de véhicules militaires 1/35

1:35 M32 Recovery Vehicle

510006547

€27.49

Article number: 510006547 Product: 1:35 M32 Recovery Vehicle Model Dim.: 16,7 cm NEW GLUABLE TRACKS The Armored Recovery Vehicles (ARV), were introduced during the Second World War. They were built on the hulls of existing armored vehicles, removing the main armament and the turret and installing of specific equipment for the recovery or repair of armoured fighting vehicles damaged in battle. The American M-32 ARV was based on the chassis of the well-known Sherman A-4 medium tank and it was used by U.S. Army in the European Theater of Operations during the Second World War. It was characterized by the superstructure that permitted to lift and to trail the damaged tanks. Furthermore on M-32 a wide set of repairing tools and spare parts were loaded on board emphasizing its role of real "mobile armoured workshop" capable of operating on the front line. The M-32 was even able to perform complex operation as the replacing of the tank engine. The M-32, after the end of WWII, served in the U.S. Army during the Korean War and it was used by many Countries until the ‘90s. Detailed Plastic Kit of model M32 Recovery Vehicle in scale 1:35

Plus
Italeri 1:35 M4A1 Sherman with U.S. Infantry

Maquettes de véhicules militaires 1/35

1:35 M4A1 Sherman with U.S. Infantry

510006568

€37.99

Article number: 510006568 Product: 1:35 M4A1 Sherman with U.S. Infantry Length of the model 167 mm CONTAINS 10 FIGURES - NEW GLUEABLE RUBBER TRUCKS - SUPER DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units and it formed the backbone of United Stated armoured forces during at those time. It has been produced in several variants and versions. The first version to be produced on wide scale was the Sherman M4A1 characterised by the rounded edges of the fully casted upper hull. Even the turret had a rounded appearance. The Sherman would entered combat in armoured corps of United States Army in 1942 during the first months of the war. It was armed with the 75 mm gun that was replaced in the latest A1 version with the high-speed 76 mm gun. Thanks to its Continental R975 gasoline engine the tank was able to obtain good performances on all type of terrains. However the most important strength of the tank was its project. The Sherman was reliable, cheap and easy to produce in great numbers. Detailed Plastic Kit

Plus
1:35 M4A2 U.S. Panzer Marine Corps

Maquettes de véhicules militaires 1/35

1:35 M4A2 U.S. Panzer Marine Corps

510006583

€35.99

Référence article: 510006583 Article: 1:35 M4A2 U.S. Panzer Marine Corps Taille du modèle 16,8 cm NOUVELLES CHENILLES COLLABLES T54E1 - DÉCALQUES POUR 4 VERSIONS - FEUILLE D'INSTRUCTIONS COULEUR Le char moyen M4 Sherman était le char principal utilisé par les États-Unis pendant la Seconde Guerre mondiale. Il a été produit dans un nombre important d’unités et a formé l’épine dorsale des forces blindées des États-Unis à cette époque. Il a été produit en plusieurs variantes et versions. La première version produite à grande échelle était le Sherman M4A1 caractérisé par les bords arrondis de la coque supérieure entièrement coulée. Même la tourelle avait un aspect arrondi. Cependant, la force la plus importante du char était son projet. Le Sherman était fiable, bon marché et facile à produire en grand nombre. La version M4A2 était similaire à la précédente mais elle était à moteur diesel avec le moteur General Motors Twin G-41. Au début, le M4A2 était destiné à soutenir les activités de guerre des nations alliées comme l’Union soviétique et la Grande-Bretagne, mais de nombreux chars étaient utilisés par le Corps des Marines des États-Unis. Activement utilisés dans les batailles pour la reconquête des archipels de l’océan Pacifique, ils ont joué un rôle fondamental dans la destruction des puissantes fortifications construites par l’armée japonaise.

Plus
Italeri 1:35 M4A3E8 Sherman "Fury"

Maquettes de véhicules militaires 1/35

1:35 M4A3E8 Sherman "Fury"

510006529

€40.99

Article number: 510006529 Product: 1:35 "M4A3E8 Sherman Fury" Model Dim.: 16,8 cm Fully upgraded moulds The box contains 2 track versions made by a new raw material which can be glued and painted. The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units ant it formed the backbone of United Stated armoured forces during at those time. it has been produced in several variants and versions The production of the M4A3E8 versions started at the end of 1944. The M4A3E8, adopting the nickname Easy Eight, took several technical improvements enhancing the Sherman operational effectiveness. The 76mm M1 high velocity gun had been flanked by a new horizontal volute spring suspension (HVSS) system able to ensure a better driving condition and to guarantee a higher speed. The "Easy Eight" participated to the final stages of World War II and took active part in the Korean War. Detailed Plastic Kit of model M4A3E8 Sherman "Fury" in scale 1:35

Plus
Carson 1:35 M60A-3

Maquettes de véhicules militaires 1/35

1:35 M60A-3

510006582

€32.99

Article number: 510006582 Product: 1:35 M60A-3 Size: 22,8 cm SUPER DECALS SHEET The M-60 was introduced in the first years of ‘60s in the United States Army. It was developed and designed to be the evolution of the famous tanks M-47 and M-48 Patton series. The M-60 became the most important MBT (Main Battle Tank) of the U.S. Army during the Cold War years. It was produced, until 1983, by the American company Chrysler in 15.000 units and it was adopted, in several versions, by the armed forces of numerous countries all over the World. The main armament, installed in the turret, was the 105 mm. M68 gun. The M-60 was characterized by its big size and by the adoption of the powerful V12 turbodiesel engine able to release a good operating performance and a good speed on-road and off-road. It was deployed in a lot of conflicts and operational scenarios. In 1976 the new upgraded M60A3 version was developed and it was characterized by several improvement able to enhance the operation effectiveness. The armor protection for the turret was increased and a new gun mantle was designed. Great improvement in the adoption of modern electronic and fire control systems on board. Detailed plastic kit in scale 1:35

Plus
Italeri 1:35 M923 Hillbilly Gun Truck

Maquettes de véhicules militaires 1/35

1:35 M923 Hillbilly Gun Truck

510006513

€32.99

Article number: 510006513 Product: 1:35 M923 Hillbilly Gun Truck Model Dim.: 24,8 cm UPGRADED MOULDS Decals for one version This medium cargo truck of the 5 ton category, is representative of today's generation of logistical vehicles of the U.S. Forces. It entered service in the early eighties. The M-923 has an extremely sturdy structure and excellent off-road features, which are necessary to secure the flow of material to the front line combat units. Based on this chassis many versions have been produced: wrecking trucks, tank trucks, mobile maintenance and communication trucks. The A-1 version is characteristic because of its large off-road tires which have earned it the nick-name "big-foot". During its operational use, and in particular in the most recent military campaigns in which it was employed as Iraq and Afghanistan, the "Big Foot" has often been modified with the addition of "home made" protections to reduce the damages caused by the fire of light weapons. However, the personalization of the vehicles, made "on field" by the crews, were possible thanks to the excellent platform offered by-M-923 trucks.

Plus
Italeri 1:35 Mercedes Benz L3000

Maquettes de véhicules militaires 1/35

1:35 Mercedes Benz L3000

510006558

€28.49

Article number: 510006558 Product: 1:35 Mercedes Benz L3000 Model Dim.: 17,9 cm Color instructions sheet The Mercedes Benz L3000 was widely used by German troops during the entire Second World War. Together with the Opel Blitz, it was the main solution for all logistics and transport needs of the Wehrmacht troops. From a technical point of view, the Mercedes Benz L3000 adopted a mechanical solution with rear-wheel drive. Thanks to its reliable 74 HP 4-cylinder diesel engine, the German truck was able to reach a maximum speed of 70 Km/h. It was used on all fronts and even in the most severe operating conditions, as in the North Africa environment during the Afrika Korps campaign, it always showed a good reliability and resistance. The Mercedes Benz L3000 was produced in 3 versions and in more than 27.000 units. It has been the most produced Mercedes truck during ‘40s. Detailed Plastic Kit of model

Plus
Italeri 1:35 Mod. US M978 Fuel Service Truck

Maquettes de véhicules militaires 1/35

1:35 Mod. US M978 Fuel Service Truck

510006554

€49.99

Article number: 510006554 Product: 1:35 Mod. US M978 Fuel Service Truck Model Dim.: 29,7 cm UPGRADED MOULDS - COLOR INSTRUCTIONS SHEET - NEW RIMS AND RUBBER TYRES The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. The outfitted versions, as the M978 Tanker, has been designed to perform, in a very precise and effective way, the different military logistic needs. Thanks to the loading capacity of over 9,500 liters, the tank installed on the vehicle is able to transport a significant quantity of fuel. The M978 has been effectively used by the U.S. Army in various severe operational areas such as Iraq and Afghanistan. Detailed Plastic Kit of model Mod. US M978 Fuel Service Truck in scale 1:35

Plus
Italeri 1:35 Motorcycle side car Zündapp KS750

Maquettes de véhicules militaires 1/35

1:35 Motorcycle side car Zündapp KS750

510000317

€11.99

Article number: 510000317 Product: 1:35 Motorcycle side car Zündapp KS750 Model Dim.: 6,6 cm CONTAINS 3 FIGURES The Treaty of Versailles forbade the reconstruction of the German army. Nevertheless, its commanders evaded the obstacle by introducing vehicles of the civil production, which was not subject to any limitations. Thus they set up entire companies equipped with motorvehicles, developing in this way a "motorized mentality" among the crews. The Zündapp. with a production total of 18.000 units due to its structure which guaranteed easy and economical handling - was considered one of the most modern accomplishments of the age in the field of motorcycle construction. Because of its extraordinary qualities, the Zündapp could follow and escort the tank units of the Wehrmacht and the Waffen-SS to all theatres of operations, especially in Russia, since the side car was even furnished with heating for hands and feet of the man. Zündapps were distributed to all units of the armed forces, Only after 1943, they were replaced by 4-wheel vehicles. Detailed plastic kit of model Motorrad-Gespann Zündapp KS750 in scale 1:35

Plus
Italeri 1:35 Sd.Kfz. 305/22 Funkwagen

Maquettes de véhicules militaires 1/35

1:35 Sd.Kfz. 305/22 Funkwagen

510006575

€29.99

Article number: 510006575 Product: 1:35 Sd.Kfz. 305/22 Funkwagen Model Dim.: 17,1 cm COLOR INSTRUCTION SHEET - RUBBER TYRES The Opel Blitz was the main truck used by German forces during the Second World War. It was deployed extensively on all fronts in huge numbers, and was consequently considered to be the "working mule" of the Wehrmacht. Thanks to the sturdy frame, the robust system of rigid axles with leaf springs and the twin-wheels on the back, the Opel Blitz was able to carry a payload of over 3 tons. The 3,600 cc. engine was easy to maintain and provided 75 hp. The most popular version was the 4x2 with rear wheel drive. However, there was also a 4x4 version that operated both in Russia and the North African desert. Thanks to its flexibility and its wide rear cargo area, the Opel Blitz was also deployed in additional roles including as a mobile command post equipped with radio communications for battlefield management of ground troops. Detailed plastic kit in scale 1:35

Plus
1:35 Semovente M42 da 75/18 mm

Maquettes de véhicules militaires 1/35

1:35 Semovente M42 da 75/18 mm

510006569

€36.99

Article number: 510006569 Product: 1:35 Semovente M42 da 75/18 mm Model Dim.: 14 cm NEW MOULDS - PE SHEET - RUBBER TRACKS At the end of the 1930’s the Italian Regio Esercito (Royal Italian Army) began to deploy self-propelled artillery guns to provide support for tanks and infantry units. The ‘Semovente’ 75/18 was developed on the back of the ‘M’ series medium tank hull and soon became the most feared Italian armored vehicle. In addition to its primary artillery role, the 75mm howitzer installed in the casemate proved to be a highly effective anti-tank weapon, capable of destroying even the most powerful and heavily armored British and American tanks. As well as its formidable firepower, far superior to that of the M-13 and M-14 tanks, the ‘Semovente’ was valued for its low profile which made it difficult to locate, and also for its overall on-road/off-road performance. It was deployed by the Regio Esercito in Africa and also in a defensive role during Allied operations in Italy. Following Italy’s withdrawal from the conflict it was used in service by some German Wehrmacht anti-tank units, thereby validating its overall battle effectiveness.

Plus
Italeri 1:35 Sherman M4A1

Maquettes de véhicules militaires 1/35

1:35 Sherman M4A1

510000225

€28.49

Référence article: 510000225 Article: 1:35 Sherman M4A1 Taille du modèle 16,5 cm Édition spéciale "V-DAY" NOUVELLES VERSIONS DE DÉCALQUES: FRANCE & AFRIQUE DU SUD (en plus de la version américaine existante) Lorsque les Allemands attaquèrent la Russie en 1941, les Etats-Unis comprirent vite que leurs possibilités d’être impliqués dans un conflit s’étaient considérablement accrues. A toutes fins utiles, le président Roosevelt donna l’ordre d’augmenter la production de tanks M4. Ce char ne représentait qu’en partie une nouveauté car il provenait du modèle précédent le M3 "Grant". Il était tout de même porteur de quelques innovations importantes comme la suppression de la coupole secondaire et de son canon de 37 mm et la coque supérieure qui était soudée ou moulée. Le "Général Sherman", puisque tel fut le nom de ce nouveau tank, était équipé d’un canon de 75 mm. Pourtant il était de toute évidence bien insuffisant pour affronter les tanks allemands. Ceci entraîna toute une série de modifications, comme l’adoption d’une tourelle tout à fait inédite, d’une pièce de 16 mm, plus efficace que la précédente et de blindages supplémentaires qui donnèrent lieu au modèle M4 A1. Mis en service à partir de janvier 1944, ce nouveau modèle, qui fut fabriqué environ à 3,400 exemplaires jusqu’à la fin de la guerre, montra, en dépit de ses perfectionnements, de nombreuses lacunes au point de vue de la protection: en fait les équipages des "Sherman" étaient souvent obligés de renforcer la protection des fiancs et de l’avant de leurs tanks en y appliquant des sacs de sable ou bien en soudant des morceaux de chenille aux endroits les plus exposés. Ils arrivèrent même, à certains moments, à certains moments, à garnir les "Sherman" de plaques d’acier ou de blocs en ciment. Sa suprématie en nombre lui permit toutefois de rivaliser avec les tanks allemands et il put mettre à profit ses deux atouts principaux, à savoir: sa mobilité et son excellent canon de 76 mm. A dater du débarquement en Normandie, il prit part à toutes les phases de la guerre en Europe, sur les fronts ouest et sud.

Plus
Italeri 1:35 Steyr RSO/01 w/Germ.soldiers+access

Maquettes de véhicules militaires 1/35

1:35 Steyr RSO/01 w/Germ.soldiers+access

510106549

€39.99

Article number: 510106549 Product: 1:35 Steyr RSO/01 w/Germ.soldiers+access Model Dim.: 12,6 cm CONTAINS 7 FIGURES, ACCESSORIES AND WINTER TRACKS - CANVAS COVER NOT INCLUDED Decals for 5 versions In order to cope with the poor road conditions on the Eastern front, the Germans built tracked tractors to tow all types of vehicles and also serve to carry various loads from ammunition to Food supplies. The official description of this vehicle was "Raupenschlepper Ost" (tracked tractor-East). The RSO/1 was built by the Steyr-works in then annexed Austria. It had a commercial-type pressed steel cab, but a wooden cargo body. It proved ideal for the mud and slush conditions of the Russian front. The vehicles were part of the desperate German efforts to avoid defeat by the overwhelming Soviet armies.

Plus
Italeri 1:35 TIGER I Ausf. E/H1

Maquettes de véhicules militaires 1/35

1:35 TIGER I Ausf. E/H1

510000286

€32.99

Article number: 510000286 Product: 1/35 TIGER I Ausf. E/H1 The model TIGER I Ausf. E/H1 in scale 1/35 has a length of about 241 mm. Decals for one version. The Tiger was certainly the most famous armored vehicle of World War II. Its fire power and protective armor made it the dominating factor on all battle fields during the years 1943-44. It did, however, present considerable problems, due to its complex mechanical construction.The Tiger crews were continuously engaged in maintenance work, which was aggravated through extreme conditions in the African desert and the Russian Plains.

Plus
Carson 1:35 US LAV-25 T.U.A Light Armored Veh.

Maquettes de véhicules militaires 1/35

1:35 US LAV-25 T.U.A Light Armored Veh.

510006588

€34.99

Article number: 510006588 Product: 1:35 US LAV-25 T.U.A Light Armored Veh. The LAV-25 is an 8-wheel drive armored vehicle, characterized by good amphibious capacity, used since the early 1980s by the Marine Corps for reconnaissance and infantry support activities. He entered service in 1983 and actively participated in operations "Desert Storm" (1991) "Restore Hope" (1993), "Enduring Freedom" (2001) and "Operation Iraqi Freedom" (2003). Equipped with a diesel engine, which allows the LAV to reach 100 km / h, and with an independent wheel suspension system, which makes it ideal for "all-terrain" use, it was developed and built in numerous versions. The anti-tank version is equipped with the Emerson T.U.A. (Tow-Under-Armor) 901A1, a missile system armed with TOW-2 anti-tank guided missiles, installed in a rotating turret and equipped with thermal and visual target identification systems. Conceived to operate in Marines reconnaissance units, the anti-tank version is capable of providing a contrast capability against the most powerful enemy battle tanks Detailed plastic kit in scale 1:72

Plus
Carson 1:35 US M-7 Priest Howitzer Self-Prop

Maquettes de véhicules militaires 1/35

1:35 US M-7 Priest Howitzer Self-Prop

510006580

€30.49

Article number: 510006580 Product: 1:35 US M-7 Priest Howitzer Self-Prop Model Dim.: 17,2 cm NEW GLUABLE RUBBER TRACKS - DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET CONTAINS 1 FIGURE The deployment of self-propelled artillery during the Second World War was very quickly adopted by all of the combatants. Following the innovative use of mobile artillery by the German army at the outset of the conflict, the need for artillery pieces to be as mobile as tank battalions was universally recognised. The Allies initially mounted their first self-propelled artillery units on half-track vehicles, but the most effective solution manifested itself with the introduction of the M7 Priest. Using the hull of the M3 Lee medium tank the M7 was armed with a 105mm M2A1 howitzer. It was deployed operationally for the first time in 1942 by British troops who gave it the nickname "Priest", due to the position of the machine gun in the front of the vehicle which resembled a Church pulpit. Robust and reliable, it had a plentiful supply of ammunition and provided effective indirect support fire. It was used by both the American army and the U.S. Marines on all fronts throughout the course of the war. Detailed plastic kit

Plus
Carson 1:35 US M4A3E8 Sherman Korea Krieg

Maquettes de véhicules militaires 1/35

1:35 US M4A3E8 Sherman Korea Krieg

510006586

€41.99

Article number: 510006586 Product: 1:35 US M4A3E8 Sherman Korea Krieg The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units ant it formed the backbone of United States armored forces during at those time. It has been produced in several variants and versions The production of the M4A3E8 versions started at the end of 1944. The M4A3E8, adopting the nickname Easy Eight, took several technical improvements enhancing the Sherman operational effectiveness. The 76mm M1 high velocity gun had been flanked by a new horizontal volute spring suspension (HVSS) system able to ensure a improved driving condition and to guarantee a higher speed. The "easy eight" participated in the final stages of the Second World War and took an active part in the Korean War, alongside the M26 Pershing and M46 Patton. Detailed Plastic Kit

Plus
Italeri 1:35 WWII US Off-Road Support Vehicle

Maquettes de véhicules militaires 1/35

1:35 WWII US Off-Road Support Vehicle

510000314

€14.29

Article number: 510000314 Product: 1/35 WWII US Off-Road Support Vehicle Model Dim.: 14 cm Decals for one version. In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multi-purpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of 1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II.

Plus
1:48 Sd.Kfz.385 Tankwagen Bat.o.Brit.

Maquettes de véhicules militaires 1/24 ; 1/48

1:48 Sd.Kfz.385 Tankwagen Bat.o.Brit.

510002808

€31.99

Article number: 510002808 Product: 1:48 Sd.Kfz.385 Tankwagen Bat.o.Brit. Model Dim.: 12,0 cm "Battle of Britain 80th Anniversary" DECALS SHEET FOR 4 VERSIONS - COLOR INSTRUCTION SHEET FIGURES NOT INCLUDED - AIRCRAFTS NOT INCLUDED The Opel Blitz was the main truck used by German forces during the Second World War. It was deployed extensively on all fronts in huge numbers and considered to be the ‘working mule’ of the Wehrmacht. Due to its sturdy frame, the robust system of rigid axles with leaf springs and the twin-wheels on the back, the Opel Blitz was able to carry a payload of over 3 tons. The 3600 cc. engine was easy to maintain and provided 75 hp. Largely due to its great flexibility it was the developmental platform for several specialist models and versions such as the Kfz. 385 ‘Tankwagen’ which was deployed as the principal refilling truck of the Luftwaffe.. The vehicle was equipped with a rear fuel tank, pumping system and a simplified cabin with fabric roof. The exhaust system and silencer was repositioned to allow for the safe refueling of aircraft. Detailed plastic kit

Plus
Italeri 1:72 1/4 Ton 4x4 Truck

Maquettes de véhicules militaires 1/35

1:72 1/4 Ton 4x4 Truck

510107506

€17.49

Article number: 510107506 Product: 1:72 1/4 Ton 4x4 Truck Model Dim.: 4,6 cm CONTAINS TWO FAST ASSEMBLY MODELS + DECALS SHEET Decals for 6 versions In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multi-purpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of 1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement.

Plus
1:72 15cm FieldHowitzer/ 10,5cm FieldGun

Maquettes de véhicules militaires 1/72

1:72 15cm FieldHowitzer/ 10,5cm FieldGun

510007082

€18.99

Article number: 510007082 Product: 1:72 15cm FieldHowitzer/ 10,5cm FieldGun Model Dim.: 12,0 cm 100% NEW MOULDS - FULLY DETAILED MODEL - DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET CONTAINS ONE MODEL AND 5 FIGURES The 150 mm SFH18 howitzer was widely deployed by the Wehrmacht on all of the key fronts during WW11. It was developed during the ’20s and ‘30s by Rheinmetall and Krupp, one of the main artillery companies in Germany, with a view to optimizing resources and technological capabilities within the parameters imposed by the Treaty of Versailles. From 1933 onwards, Germany's rearmament planning became ever more ambitious, with a particularly significant increase in the production of howitzers and field cannons. The SFH18 had a simple and reliable structure with a maximum range of 13.5 km. It could be divided into two sections and towed by horses, or more often during the war, by half-tracks. The SFH18 had a seven-man crew. A 105 mm calibre version was developed on the same carriage, (sK 10,5 cm)which was characterized by the longer barrel, but was produced in few specimens as much heavier than the standard 105 mm leFH18, which was the field artillery cannon supplied to the Wehrmacht. Detailed plastic kit

Plus
Italeri 1:72 Autoblinda AB 43

Maquettes de véhicules militaires 1/72

1:72 Autoblinda AB 43

510007052

€13.49

Article number: 510007052 Product: 1:72 Autoblinda AB 43 Model Dim.: 7,3 cm Decals for 2 versions The AB 43 armoured car is an evolution from the previous AB 40 and 41 models. Equipped with a new larger turret, its main weapon was the 20MM calibre Breda 35, with a co-axial 8MM machine gun. Unfortunately the AB 43 never entered into service with the Italian army as its production was only started in 1944 under the control of the German forces, which had occupied the Italian industry following the armistice in September 1943. These vehicles were distributed to many German units operating at the Italian front. They were used particularly for controls and by the police in the northern regions, which was subject to great partisan resistance. The few examples that survived were used by the police to maintain public order after the war.

Plus
Carson 1:72 Brit. Churchill Mk. III

Maquettes de véhicules militaires 1/72

1:72 Brit. Churchill Mk. III

510007083

€16.99

Article number: 510007083 Product: 1:72 Brit. Churchill Mk. III The Churchill medium tank came into service with the British Army in 1942 to support and replace the earlier Valentines, Matildas and Crusaders, which, by then, were all outdated and inadequate in terms of both armor and weaponry, easily falling prey to the more advanced German tanks. Equipped with thick armor and a reliable engine, it proved to be tough and dependable, later being produced in ever-more efficient, upgraded versions. Its chassis was also used as a platform for specialized support vehicles such as the mine clearer, the bridge layer and the flame-thrower. Detailed plastic kit

Plus
Italeri 1:72 German Guns Set: PAK35-PAK40-FLAK38

Maquettes de véhicules militaires 1/72

1:72 German Guns Set: PAK35-PAK40-FLAK38

510007026

€13.79

Article number: 510007026 Product: 1/72 German Guns Set: PAK35-PAK40-FLAK38 The model kit German Guns Set PAK 35-PAK40-FLAK 38 in 1/72 scale contains 3 models. Including 8 figures.

Plus
Italeri 1:72 Jagdpanzer 38(t) HETZER

Maquettes de véhicules militaires 1/72

1:72 Jagdpanzer 38(t) HETZER

510007057

€13.99

Article number: 510007057 Product: 1:72 Jagdpanzer 38(t) HETZER Model Dim.: 8,5 cm Including 2 figures. Decals for one version The design of this compact German army tank destroyer was based on the hull of Czechoslovakian 38T tank. Thanks to the vehicles powerful chassis various versions to be engaged as tank destroyers were designed based on this model, in the beginning simply by mounting protected machine guns. Later on they produced this model with an armoured machine gun mount. The Hetzer, which was pressed into service in the second half of 1944, proved to be an extremely efficient tank against even the most potent Allied military vehicles.

Plus
Italeri 1:72 M3 75mm Half Tank

Maquettes de véhicules militaires 1/35

1:72 M3 75mm Half Tank

510107510

€17.49

Art.Nr.: 510107510 Product: 1:72 M3 75mm Half Tank Model Dim.: 8,6 cm THE BOX CONTAINS 2 KITS - DECALS INCLUDED Decals for 2 versions

Plus
Italeri 1:72 M3A1 Half Truck  2 easykit

Maquettes de véhicules militaires 1/35

1:72 M3A1 Half Truck 2 easykit

510107509

€17.49

Article number: 510107509 Product: 1:72 M3A1 Half Track Model Dim.: 8,3 cm CONTAINS 2 MODELS

Plus
Italeri 1:72 M4 Sherman

Maquettes de véhicules militaires 1/72

1:72 M4 Sherman

510007003

€12.99

Article number: 510007003 Product: 1:72 M4 Sherman Model Dim.: 8,2 cm Decals for one version The Sherman is one of the most famous tanks of World War II, and was also the standard tank of the allied armies. The M4 was fairly well protected with armor but not sufficient enough to confront the 88mm guns of the Germans. It had a valid engine, was reliable and had sufficient range as well as armament.

Plus
Italeri 1:72 M4A2 Sherman III (2 fast ass. Mod.)

Maquettes de véhicules militaires 1/35

1:72 M4A2 Sherman III (2 fast ass. Mod.)

510107511

€16.49

Article number: 510107511 Product: 1:72 M4A2 Sherman III Model Dim.: 8,2 cm THE BOX INCLUDES 2 KITS Decals for 3 versions

Plus
Italeri 1:72 M4A3 76mm (Fast Ass. Kit) 2 Models

Maquettes de véhicules militaires 1/35

1:72 M4A3 76mm (Fast Ass. Kit) 2 Models

510107521

€16.49

Article number: 510107521 Product: 1:72 M4A3 76mm (Fast Ass. Kit) 2 Models Model Dim.: 8,3 cm NEW MOULDS 2 FAST ASSEMBLY MODELS & SPECIAL WARGAME DECALS SHEET FOR 3 VERSION INCLUDED!

Plus
Italeri 1:72 Magach 6

Maquettes de véhicules militaires 1/72

1:72 Magach 6

510007073

€16.49

Article number: 510007073 Product: 1:72 Magach 6 Length of the model 131 mm During the Yom Kippur War, in 1973, the backbone of Israeli armored troops was formed by the American tanks M48A3 and M60A1. However, the significant losses suffered during the battles, launched an improvement program in order to increase the operating effectiveness and the reliability of Israel’s tanks. During the 1970s, more in detail, the Magach 6 was developed on the basis of the American M60. Among the numerous modifications, such as the installation of a new fire control system and the improvement of the main armament, the most visible change was the adoption of ERA (explosive reactive armor) protections, fitted to reduce the effects of anti-tank weapons and missiles adopted by the enemy armies. Between 1980 and 1990 the Magachs have been gradually replaced by the most modern and advanced Merkava tanks as Israel’s front-line MBT (main battle tanks). However, the Magach 6, through continuous upgraded, has equipped several Israeli armored units until the mid-1990s. Detailed Plastic Kit of model Magach 6 in scale 1:72

Plus
Italeri 1:72 Panzer Kpfw. IV

Maquettes de véhicules militaires 1/72

1:72 Panzer Kpfw. IV

510007007

€17.29

Article number: 510007007 Product: 1:72 Panzer Kpfw. IV Model Dim.: 8,5 cm Decals for one version The Panzer IV was developed in the first few months of the 2nd World War to provide the German armoured forces with a better protected vehicle carrying a 7.5 CM cannon. This was a reaction to the limits of its predecessor the model III with a 5 CM cannon compared to the threat of the enemys means, in particular the soviet T 34s which were equipped with an arm of that calibre as well as good armour plating. The model IV tank was extensively used on all fronts during the 2nd World War by the German Army. Many different gradually improved versions were produced to face the on-going improvements of the opponents means.

Plus
60 de 93 Article