Trier selon:

Meilleures ventes
  • Meilleures ventes
  • Nouveautés
  • Prix croissant
  • Prix décroissant
Filtrer

Filtrer
Prix
Catégorie
Marque
Marques & licences
Échelle
Others 1:24 Mercedes-Benz 190E

Maquettes de véhicules 1/24

1:24 Mercedes-Benz 190E

510003624

€37.49

Article number: 510003624 Product: 1:24 Mercedes-Benz 190E Introduced in 1982, it marked a turning point in the production of the prestigious Stuttgart car manufacturer. The "190" was in fact the entry version of the Mercedes product range but nevertheless contained important stylistic and technical innovations. The design, with an excellent mix of style and elegance, will later also influence the cars of the higher segments of future Mercedes production. From a technical point of view, the car adopted a longitudinal front engine, rear-wheel drive and disc brakes on all four wheels. MacPherson front end and "multilink" rear suspension. The first versions produced were equipped with two petrol engines of 1,998 cm3 with carburetor or, in the 190E version, with injection. Shortly after, the 2.3 16V sports version was presented which was also used in single-make sports competitions such as the 1984 "Nurburgring Champions Race Cup", which was attended by famous drivers of the period and some "old glories" of Formula 1. Detailed plastic kit in scale 1:32

Plus
Others 1:12 Alfa Romeo 8C 2300 Monza Nuvolari

Maquettes de véhicules 1/12

1:12 Alfa Romeo 8C 2300 Monza Nuvolari

510004706

€175.00

Article number: 510004706 Product: 1:12 Alfa Romeo 8C 2300 Monza Nuvolari Model Dim.: 32,0 cm 100% NEW MOULDS - Colors Instructions Sheet - Steering wheels - Realistic suspension - Highly detailed engine - Rubber tires - 300 plastic parts - 30 Chromed parts - Photoetched parts - Opening cowling - Screws, tubes, rope and nylon net

Plus
Others 1:12 F-104G Cockpit

Maquettes de véhicules 1/12

1:12 F-104G Cockpit

510002991

€34.49

Article number: 510002991 Product: 1:12 F-104G Cockpit Model Dim.: 14,7cm/9,0 cm 124 parts - Fully detailed real F-104 cockpit controls - Fully detailed Martin Baker Mk.I Q ejection seat - Complete cockpit dials decals - Adhesive acetate silk seat belts - Pilot’s helmet and oxygen mask - Pilot’s visor, gunsight and radar scope clear parts The Lockheed F-104 Starfighter is one of the most renowned fighters in aviation history and also the one with the longest operational service. Its history began at the end of the ‘50s and ended with some air forces in the mid-2000s. Its unique airframe, with slender fuselage and very little wing surface, made this aircraft ideal in an interceptor role. Due to the thrust of its General Electric J79-GE-11A afterburning turbojet engine it could exceed Mach 2,2 with a first class rate of climb. This scale model kit allows modelers to recreate the famous "Starfighter" cockpit with the typical internal layout of the ‘50s and ‘60s fighters, which was ‘home’ to many former NATO pilots. The fine detail of the instrument panel typical of the period, is matched by the highly accurate reproduction of the Martin-Baker ejection seat. Detailed plastic kit in scale 1:12

Plus
Others 1:12 Fiat 500F (1968 version)

Maquettes de véhicules 1/12

1:12 Fiat 500F (1968 version)

510004703

€130.00

Article number: 510004703 Product: 1:12 Fiat 500F (1968 version) Model Dim.: 25 cm 100% new moulds - Highly detailed model - Opened or closed top - Opening car doors - Front and rear opening bonnets - Steering wheels - Working suspensions - Rubber tires - Photoetched and chromed parts The model can be realized in the Anglo-Saxon version with right drive. The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. Furthermore the new car should be easy to drive, even in the city traffic, and provide very low running costs. The "Fiat 500" was released on the market in July 1957 and it was immediately a success. In 1965 was introduced the 500F, the version with the largest number of units produced. Easily recognizable for the front-hinged doors, in line with the new laws, the Fiat 500F adopted several technical and aesthetic improved solutions as the new frame and the wider windscreen. The Fiat 500F is, still today, the most "classic" version of the whole 500 production and it remains in the heart of a huge number of car fans. Detailed plastic kit of model Fiat 500F (1968 version) In scale 1:12

Plus
Others 1:24 Fiat 131 Abarth'77 SanRemo RallyWin

Maquettes de véhicules 1/24

1:24 Fiat 131 Abarth'77 SanRemo RallyWin

510003621

€38.99

Article number: 510003621 Product: 1:24 Fiat 131 Abarth'77 SanRemo RallyWin The Fiat 131 Abarth was built on the frame of the two-door Fiat sedan. The development made by Abarth considered several modifications and improvements starting from the reduction of the body weight using lighter materials. Then some new fenders, to permit the adoption of larger wheels, were installed and new air-intakes on the hood and on the sides to optimize the cooling of the mechanics were designed. The engine was a 4-cylinder longitudinal engine characterised by the use light alloy head and 4 valves per cylinder. The Fiat 131 Abarth was built from 1976 and it was used in the World Rally Championship were achieved important results as three manufacturers’ championship, one pilots’ championship and one FIA trophy. It took part in international competitions until 1982 when it was replaced by the Lancia brand cars. One of the most famous victories was the prestigious 1977 San Remo Rally. The Fiat car achieved its success with notable drivers such as J.C. Andruet and C. Delferrier. Detailed plastic kit in scale 1:32

Plus
Others 1:24 Ford Transit Mk. II

Maquettes de véhicules 1/24

1:24 Ford Transit Mk. II

510103687

€38.49

Article number: 510103687 Product: 1/24 Ford Transit Mk. II Model Dim.: 18,5 cm THIS MODEL IS A RIGHT & LEFT-HAND DRIVE Transit is a light commercial vehicles series produced since 1953 by Ford Germany and Ford UK and conceived for European market. The front engine of these vehicles allows to have a lower loading bed, which eases the loading process. Anyway the very first Transit was produced in 1965 by the German and British Ford together, expressly wanted by Henry Ford; this cooperation gave life to what is Ford Europe today and to the well-known vehicle MK I. In 1978 it was further reshaped and the MK II was born. In 1984 an esthetic restyling was made on the front bumper and to the engine, which was a 68 horsepower Diesel York of 2498 cbm. These vehicles have been a commercial success not only in Europe, as still today they are in production also for extra European markets. Detailed Plastic Kit of model Ford Transit Mk. II in scale 1:24

Plus
Others 1:24 Land Rover 109 LWB

Maquettes de véhicules 1/24

1:24 Land Rover 109 LWB

510003665

€39.99

Article number: 510003665 Product: 1:24 Land Rover 109 LWB The "Land Rover" was certainly one of the best known symbols of "made in England" on 4 wheels and is in fact a milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes made in 1947, to satisfy both civil and military tasks. Inspired, even if not directly, by the American Jeep, it was characterized by 4x4 all-wheel drive and a sturdy and reliable structure capable of tackling the most difficult and demanding routes. The aluminum body made it lighter but, at the same time, more resistant to corrosion and a long service life. In 1971, when the Series III was introduced, more than a million units had already been produced and built for both civil and military use, both in the 88-inch "standard wheelbase" version or in the 109 "long wheel base" version inches, the latter reproduced in the kit. Detailed plastic kit

Plus
Others 1:24 Mercedes-Benz G230 Feuerwehr

Maquettes de véhicules 1/24

1:24 Mercedes-Benz G230 Feuerwehr

510003663

€38.49

Article number: 510003663 Product: 1:24 Mercedes-Benz G230 Feuerwehr Following its operational successes during WW1, the Italian "Regia Marina" continued with further post- war developments into various underwater and surface assault vehicles. The Motoscafo da Turismo Modificato (M.T.M.) for example, was designed to ensure a covert and rapid approach to targets with a low risk of detection from enemy forces. Closing in on the target, the pilot then adjusted the rudder to maintain direction and propelled the fast small boat on a collision course to the target. The pilot, positioned at the stern, jumped from the craft at a safe distance before the collision. The high explosive charge positioned in the bow of the Barchino detonated upon impact against the target. The most successful deployment of the ‘Barchino’ by the Italian Regio Marina, was the assault led by Luigi Faggioni on the Royal Navy heavy cruiser HMS York at Suda Bay, Crete in 1941. Detailed plastic kit in scale 1:35

Plus
Others 1:24 Porsche 935 Baby

Maquettes de véhicules 1/24

1:24 Porsche 935 Baby

510003639

€36.99

Article number: 510003639 Product: 1:24 Porsche 935 Baby Model Dim.: 19,6 cm SUPER DECALS SHEET To compete in the FIA-Group 5 car competitions, Porsche developed a special car line characterized by dedicated engine and chassis solutions, beginning with the production of the famous 911 Turbo. Several versions of this model were made, but one of the most famous was the Porsche 935J. The "Baby" as it was known, was built to compete in the 2.0-liter German national championship. The car used a 1.425 air-cooled engine with a power performance of 261Kw. The Porsche 935J achieved an important victory in the 1977 German Grand Prix held in Hockenheim, that proved its excellent engine performance and design features. Detailed plastic kit in scale 1:24

Plus
Others 1:24 VW Golf GTI Rabbit

Maquettes de véhicules 1/24

1:24 VW Golf GTI Rabbit

510003622

€38.49

Article number: 510003622 Product: 1:24 VW Golf GTI Rabbit The Volkswagen Golf is an iconic vehicle designed and produced by the Wolfsburg car manufacturer. It was first introduced in Spring 1974 and immediately became a highly successful commercial product. The first series (1974-1983), offered leading edge technical capabilities to a very receptive consumer market of that period, including a water-cooled front engine, front-wheel drive, solid and robust bodywork with a functional but equally attractive design. The high quality to price ratio was the real "competitive edge" that made the Golf so successful however. At the Frankfurt Motor Show in 1975, the sporty version Golf GTI was introduced which incorporated the high performance 110 HP 1,600 cc engine. The following year saw the mass production of the Golf GTI and in just two months it achieved notable commercial successes in many European and non-European countries Detailed plastic kit

Plus
Others 1:12 Alfa Romeo 8C/2300 1931-33

Maquettes de véhicules 1/12

1:12 Alfa Romeo 8C/2300 1931-33

510104708

€190.00

Article number: 510104708 Product: 1:12 Alfa Romeo 8C/2300 1931-33 Model Dim.: 32,0 cm Colors Instructions Sheet - Steering wheels - Realistic suspension - Highly detailed engine - Rubber tires - 320 plastic parts - 30 Chromed parts - Photoetched parts - Opening cowling - Screws, tubes and nylon net The Alfa Romeo 8C can be considered as one of the most famous sports cars of the 1930s. The car's name derives from the engine adopted: an 8-cylinder in-line supercharged engine with a displacement of 2,336 cc. The Alfa Romeo could be considered the "state of art" for technology, innovative solutions and performances. Characterized by an impressive reliability and driveability the "8C" achieved significant victories in international car racing competitions. It linked its name to the famous Italian driver Tazio Nuvolari that won, among the others, the Targa Florio race in Sicily and the prestigious Italian Grand Prix at Monza. This last victory gave the "Monza" name to the twin seater GP car. From the racing version, a production batch of almost 200 vehicles was produced for the private markets and to be used on the normal road.To celebrate the 110th anniversary of the famous Italian manufacturer we are releasing the two-seater Sport version of the 1930’s. The car was distributed at that time via the Alfa Romeo sales network to those customers wealthy enough to purchase the most successful sports car of the period. Detailed plastic kit in scale 1:72

Plus
Others 1:12 FIAT 806 Grand Prix

Maquettes de véhicules 1/12

1:12 FIAT 806 Grand Prix

510004702

€180.00

Article number: 510004702 Product: 1/12 FIAT 806 Grand Prix Model Dim.: 30 cm UPGRADE PROTAR MOULDS The Fiat 806 Grand Prix adopted significant innovations for its time. In fact, the Fiat 806 was the "progenitor" of the modern Formula One racing cars. Developed and produced by FIAT, the Italian automobiles manufacturer, in 1927, it could be considered the first Grand Prix car ever built before. Thanks to its 180 HP 12 cylinders engine, the Fiat 806 was able to reach and even exceed the speed of 240 Km/h. However, the most important innovations were made in the development of the chassis, mechanics and bodywork. In fact, the engine and gearbox unit was located between the two chassis bars in order to optimize the performance and the drivability. The Italeri model is unique and very detailed (over 400 pieces to be assembled). The bonnet can be open to view the highly detailed engine. It has working steering, soft rubber tires, photo etched parts and little metallic accessories (screws, nuts, springs, etc). Detailed plastic kit of model FIAT 806 Grand Prix In scale 1:12

Plus
Others 1:12 FIAT Abarth 695 SS/ Assetto Corsa

Maquettes de véhicules 1/12

1:12 FIAT Abarth 695 SS/ Assetto Corsa

510004705

€145.00

Article number: 510004705 Product: 1:12 FIAT Abarth 695 SS/ Assetto Corsa Model Dim.: 25,0 cm New moulds - Highly detailed model - Openable hood and trunk - Open or closed top - Opening car doors - Steerable wheels - Working suspension - Rubber tires - Photoetched and chromed parts One Model in two versions: - Fiat Abarth 695SS - Fiat Abarth 695SS Assetto Corse The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. In addition to the classic Fiat 500, that obtained an impressive commercial success all over the World, the Italian car manufacturer Abarth produced several special versions characterized by unmistakable sporting and racing attitude. In 1964 Abarth, originally founded as racing team, presented two interesting versions developed on the Fiat Nuova 500 chassis and body : the 695 and the 695 SS. Both versions were equipped with a 689 cm3 engine and were able to reach the max speed of 140 Km/h. In 1965 Abarth developed the Fiat 695 SS Assetto Corsa with improved performances and feature Detailed plastic kit of model FIAT Abarth 695 SS/ Assetto Corsa In scale 1:12

Plus
Others 1:12 FIAT Mefistofele 21706c.c. 1923-25

Maquettes de véhicules 1/12

1:12 FIAT Mefistofele 21706c.c. 1923-25

510104701

€195.00

Article number: 510104701 Product: 1:12 FIAT Mefistofele 21706c.c. 1923-25 Model Dim.: 45 cm Upgrade Protar Moulds Fiat Mefistofele, the Queen of World Land Speed The one-off racing car "Eldridge", derived from the old Fiat SB4 chassis, became known as Mephistofele for the infernal noise emitted by its powerful aircraft 6-cylinders in-line engine, giving a capacity over 20,000 cm3, not attenuated by exhaust mufflers kept "free" to provide the most significant performance. On 12th July 1924 in Arpajon, the Mefistofele, was able to reach, driven by its pilot and designer Ernest Eldrige, the amazing speed, for the time, of 146,01 miles per hour (over 230 Km/h) and broke the World Land Speed Record achieving an impressive result. The Mefistofele, was characterized by the high back bodywork able to contain the powerful Fiat A-12 liquid-cooled engine and for its structure especially made to achieve the speed record.

Plus
Others 1:12 Lancia Delta HF Integrale 16V

Maquettes de véhicules 1/12

1:12 Lancia Delta HF Integrale 16V

510104709

€215.00

Article number: 510104709 Product: 1:12 Lancia Delta HF Integrale 16v The sporty version of the Lancia Delta road model - the "HF" 4WD - is an icon of rally cars. The Delta HF was produced in the second half of the 1980s and took part in the World Rally Championship from 1987 to 1988, won two world championship titles and took first place in numerous races such as the prestigious Monte Carlo Rally and that of San Remo. Its development, the Lancia Delta Integrale, took part in races until 1993, won another 5 world championship titles and consolidated the "Palmares" in the Italian company's off-road competitions. in many aesthetic details that made it more muscular, such as the enlarged fenders and new air inlets on the bonnet, the technology and engine of the HF Integrale have also been improved. The performance of the 1995 cc turbo engine, for example, has been increased to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and the early 90s and brought many famous drivers such as Miki Biasion, Didier Auriol or Juha Kankkunen to victory. Detailed plastic kit in scale 1:72

Plus
Others 1:12 Renault RE 20 Turbo

Maquettes de véhicules 1/12

1:12 Renault RE 20 Turbo

510104707

€185.00

Article number: 510104707 Product: 1:12 Renault RE 20 Turbo Length of the model 383 mm In 1977 the French car manufacturer Renault made its debut in the Formula 1 world championship with a dedicated racing team that introduced important innovations in the world of competition. The F1 Renault team took part in the world championship in the 1980 season with the Renault RE20 powered by a turbocharged V6 Renault Gordini EF1 engine capable of delivering 520 HP. The team was completely French as the team of pilots composed by Jean-Pierre Jabouille, with the racing number 15 and René Arnoux with the racing number 16. During the season the team obtained three victories in the Brazil, South Africa and Austria GP. The Renault 20 series was modified and improved but in 1981 season, after the first five races, it was replaced by the 30 series with a redesigned chassis. Detailed plastic kit

Plus
Others 1:16 Mercedes-Benz 300 SL Gullwing

Maquettes de véhicules 1/12

1:16 Mercedes-Benz 300 SL Gullwing

510003612

€65.99

Article number: 510003612 Product: 1:16 Mercedes-Benz 300 SL Gullwing Length of the model: 286 mm BACK AGAIN! The Mercedes-Benz 300 SL was produced in 1954 by the German car manufacturer and it’s a masterpiece on four-wheels for design, elegance and luxury. The 300 SL, where the acronym stands for Sport Leicht, (Sport Light), adopted innovative solutions for the time. The Mercedes 2 door coupe had a tubular frame, a front 2.996 cc longitudinal engine connected to a 4-speed transmission and the rear drive. The maximum speed of 300 SL was 260 Km/h (162 mph). The real strength of the car, however, was in its innovative design and the adoption of the characteristic and eye-catching Gull-wing doors. Even today the Mercedes-Benz 300 SL is an icon of design and style of the period ant it is a real icon for collectors and fans. Deatailed plastic kit

Plus
Others 1:24 Alfa Romeo Giulietta Spider 1300

Maquettes de véhicules 1/24

1:24 Alfa Romeo Giulietta Spider 1300

510003653

€35.99

Article number: 510003653 Product: 1:24 Alfa Romeo Giulietta Spider 1300 Model Dim.: 16,2 cm COLORS INSTRUCTIONS SHEET - DETAILED ENGINE - CHROME PARTS AND CAPOTE FOR CLOSED VERSION In 1962 the Alfa Romeo Giulietta Spider evolved with the adoption of some aesthetic improvements on the bodywork, some interior details and, the new 1.570 cm3 four cylinder engine able to release 92 Hp. Thanks to the new engine the Italian car was able to reach the max speed of 172 Km/h. The mechanical lay-out was based on the rear-wheel drive and four independent wheel suspension. The "Veloce" sport version was able to offer to the customers a powerful engine (112 Hp) with two carburetors and the adoption of the disk brakes on the frontal wheels. Detailed Plastic Kit of model

Plus
Others 1:24 Audi Quattro Rally

Maquettes de véhicules 1/24

1:24 Audi Quattro Rally

510003642

€36.49

Article number: 510003642 Product: 1/24 Audi Quattro Rally SUPER DECALS SHEET In 1980, during the Geneva Motor Show, the German car manufacturer presented to the public its new twodoor coupé called Audi Quattro. Produced for all the '80s the Italian name choosed by Audi (Quattro is the Italian word for "four") ine was pointed out the main feature and the most important selling point : the fourwheel drive. It was the first time that the 4x4 solution was adopted on a coupé with the goal to achieve high numbers in terms of production and sales on the market. The Audi Quattro was able to release good driving performance, thanks to its frontal longitudinal engine, and very good reliability on all type of road conditions. From the mass production a dedicated car for competitions was developed on 1981 and it debuted in the World Rally Championship, achieving good results. The success of "Quattro" cars is still existing today in fact the name has become a real "brand" that identifies all the range of Audi’s four wheel drive production. Detailed Plastic Kit

Plus
Others 1:24 B.M.W. 320 Gr. 5

Maquettes de véhicules 1/24

1:24 B.M.W. 320 Gr. 5

510003626

€36.99

Numéro d’article: 510003626 Produit: 1:24 B.M.W. 320 Gr. 5 En 1976, la FIA a introduit un nouveau Groupe 5, avec des règles spécifiques, réservé aux voitures de production « spéciale » sur la scène internationale des courses automobiles. Les nouvelles normes imposent une largeur de carrosserie similaire à celle de la production de série sur laquelle, toutefois, des pare-boue plus grands peuvent être montés afin de bénéficier d'une largeur de piste élargie et de pneus plus larges. BMW a participé à la compétition du Groupe 5 avec une version dédiée de son nouveau modèle haut de gamme, la E21 « 320 ». Un nouveau profil aérodynamique intégrant de grands garde-boue a été créé et un puissant propulseur capable de délivrer 300 ch a été utilisé. La voiture a été utilisée avec succès par l'équipe officielle de la maison de Monaco et a également servi de base à la formation de jeunes pilotes prometteurs.

Plus
New
Others 1:24 B.M.W. M1 Procar

Maquettes de véhicules 1/24

1:24 B.M.W. M1 Procar

510003643

€38.49

Référence article: 510003643 Article: 1:24 B.M.W. M1 Procar Taille du modèle: 18,1 cm La BMW M1 a été produite par le constructeur automobile bavarois entre 1978 et 1981. Caractérisée par un design nettement sportif, elle adop-tait des solutions techniques typiques des voitures de course, telles qu’un moteur central longitudinal, un cadre en treillis et des suspensions in-dépendantes. Ayant été développée et construite pour participer aux com-pétitions du Groupe 5, où elle remporta quelques victoires, BMW décida de réaliser un championnat monomarque ProCar. Les voitures qui ont partic-ipé au championnat étaient équipées d’un puissant moteur de 470 CV et étaient conduites, entre autres, par des noms célèbres de l’univers de la Formule 1 tels que Niki Lauda, Piquet, De Angelis e Pironi. Le championnat Procar était très populaire et avait, pour l’époque, une grande visibilité dans les médias. Il fut disputé pendant deux ans. En 1979, il a été remporté par Niki Lauda et la saison suivante par Nelson Piquet.

Plus
Others 1:24 Fiat "500" (2007)

Maquettes de véhicules 1/24

1:24 Fiat "500" (2007)

510003647

€33.49

Article number: 510003647 Product: 1:24 Fiat "500" (2007) Length of the Model 148 mm In 2007, the Fiat Group presented the successor to the most iconic car of Italian automotive production: the Fiat 500. The new model features a distinctive design and interesting retro-style as modern reinterpretation of the "classic" Fiat 500 launched on the market in 1957. Thanks to its unique design, the adoption of the most innovative technological and safety solutions, the Fiat 500 is positioned on the market as a premium city car, accessible but at the same time exclusive. The wide range of versions and accessories enhance the possibility for the customer to personalize the car and make it unique. From its release on the market the car adopted several engines from the twin-cylinder petrol 895cc "Twinair" to the four-cylinder diesel 1,248 cc "Multijet Detailed Plastic Kit

Plus
Others 1:24 Fiat 131 Abarth Rally

Maquettes de véhicules 1/24

1:24 Fiat 131 Abarth Rally

510003662

€35.99

Article number: 510003662 Product: 1:24 Fiat 131 Abarth Rally Model Dim.: 17,4 cm SUPER DECAL SHEET EXTRA CATALOGUE The Fiat 131 Abarth was built on the frame of the two-door Fiat sedan. The development made by Abarth considered several modifications and improvements starting from the reduction of the body weight using lighter materials. Then some new fenders, to permit the adoption of larger wheels, were installed and new air-intakes on the hood and on the sides to optimize the cooling of the mechanics were designed. The engine was a 4-cylinder longitudinal engine characterised by the use light alloy head and 4 valves per cylinder. The Fiat 131 Abarth was built from 1976 and it was used in the World Rally Championship where achieved important results as three manufacturers’ championship, one pilots’ championship and one FIA trophy. It took part in international competitions until 1982 when it was replaced by the Lancia brand cars. Detailed Plastic Kit of model Fiat 131 Abarth Rally in scale 1:24

Plus
Others 1:24 Ford Escort Mk.II

Maquettes de véhicules 1/24

1:24 Ford Escort Mk.II

510103655

€38.49

Article number: 510103655 Product: 1:24 Ford Escort Mk.II Model Dim.: 16,7 cm The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. The product range was wide, declined in three Body styles (2 doors, 4 doors and 3 doors station wagon), five type of engines and a significant variety of settings and configurations. The Escort Mk 2 was mainly produced in the Ford Group German plants and achieved a good commercial success. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive Sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Detailed Plastic Kit of model Ford Escort Mk.II in scale 1:24

Plus
Others 1:24 Ford Escort RS 1800 MK.II Lombard

Maquettes de véhicules 1/24

1:24 Ford Escort RS 1800 MK.II Lombard

510003650

€36.49

Article number: 510003650 Product: 1:24 Ford Escort RS 1800 MK.II Lombard Model Dim.: 16,7 cm EXTRA CATALOGUE SUPER DECALS SHEET The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Successful results has been achieved. From 1975 to 1979 the Ford Escort RS 1800 won for five consecutive years the prestigious RAC (Royal Automobile Club) Rally, the most important rally event organized in the United Kingdom and an important milestone of the World Rally Championship. Among the others the team Mikkola Hannu - Hertz Arnee won the "Lombard" on 1978 and 1979 Detailed Plastic Kit of model Ford Escort RS 1800 MK.II Lombard RAC Rally in scale 1:24

Plus
Others 1:24 Ford Escort Zakspeed Gr.2 D&W

Maquettes de véhicules 1/24

1:24 Ford Escort Zakspeed Gr.2 D&W

510003664

€37.49

Article number: 510003664 Product: 1:24 Ford Escort Zakspeed Gr.2 D&W The Ford Escort Mk 2 was launched on the market in 1975. It was a decisive evolution compared to the Escort Mk 1 presented at the 1968 Brussels Motor Show. The previous version retained the high quality mechanics but was completely revised in the design that he interpreted the aesthetic and stylistic taste of the 70s. In addition to the more functional versions, there was also an Escort Sport version characterized by a more aggressive look and a markedly sporty interior. Finally, the RS 1800 version with 115 HP twin-shaft engine was also presented, which formed the basis for the special version used in the Rally world championship and which achieved significant results. The iconic Zakspeed Team built and used a dedicated version of the Escort Mk 2 between 1977 and 1978. Detailed plastic kit in scale 1:24

Plus
Others 1:24 Jaguar XJ 220

Maquettes de véhicules 1/24

1:24 Jaguar XJ 220

510003631

€37.49

Article number: 510003631 Product: 1:24 Jaguar XJ 220 The Jaguar XJ 220 became famous for its top speed amongst series production cars, attaining 350 km/h, a record which was held from 1992 and 1994. The inception of the XJ220 is unusual insofar as it originated from the ideas and creativity of Jaguar employees. Some staff worked on innovative and original projects outside of the scope of routine commercial considerations. A working group called "The Saturday Club" brought about the creation of a "concept car", which was presented at the British Motor Show in 1988, generating critical public acclaim. From this initial developmental work, the Jaguar XJ 220 emerged, with the release of the first production vehicle in 1991. Lightweight, and an extremely powerful car, it had the performance characteristics of a truly "top sports car" and was recognisable for its aerodynamic design and extremely modern lines for the period. International rock stars and wealthy businessmen were keen buyers of this prestigious vehicle. Detailed plastic kit

Plus
Others 1:24 Lamborghini Countach 25th Anniv.

Maquettes de véhicules 1/24

1:24 Lamborghini Countach 25th Anniv.

510103684

€33.49

Article number: 510103684 Product: 1:24 Lamborghini Countach 25th Anniv. Model Dim.: 18,0 cm Final version of the glorious Countach, dedicated to the 25th anniversary of Lamborghini, boasts numerous improvements, were in fact changed about 3,000 of the 8,000 pieces that make up the car. Much of the aesthetic innovations derived from the prototype Countach Evoluzione in 1986, the first supercar in the world made of carbon fiber. The air box and the air intakes were redesigned and enlarged and were mounted of miniskirts , the geometry of the suspension was modified. The improved aerodynamics allowed a maximum speed of 300 km / h. This was the last version made the Countach, which remained in production until 1990 when it was replaced by the Diablo. Detailed plastic kit

Plus
Others 1:24 Lamborghini Diabolo

Maquettes de véhicules 1/24

1:24 Lamborghini Diabolo

510103685

€32.49

Article number: 510103685 Product: 1:24 Lamborghini Diabolo Model Dim.: 18,6 cm The Diablo was produced between 1990 and 2001. During this period, Lamborghini introduced several variations of the Diablo concept, the first being the Diablo VT (Visco Traction), which featured an all-wheel drive. The Diablo was destined to become the worthy heir of the renowned Miura and Countach. This newsupercar was wide, low and futuristic. And just like its predecessors, the Diablo soon became a favorite among car enthusiasts across the world. The Diablo models helped build the legend of Lamborghini and sold well. Almost 3,000 units across all series and variations found their buyers in those eleven years of evolution. The Lamborghini bosses had wished for a maximum speed of at least 320 kph, and the engineers made this wish come true: With a top speed of 325 kph and an acceleration from 0-100 in 4.5 seconds the Diablo claimed the pole position in the super sports cars segment. It delivered its power via a rear-wheel drive and came with a newly developed V12 engine. Four valves per cylinder, a computer controlled multi-point fuel injection and a displacement of 5.7 liters helped produce a maximum of 492 HP. Detailed plastic kit

Plus
Others 1:24 Lamborghini Miura Jota SVJ

Maquettes de véhicules 1/24

1:24 Lamborghini Miura Jota SVJ

510003649

€33.99

Article number: 510003649 Product: 1:24 Lamborghini Miura Jota SVJ Length of the model 187 mm NEW MOULDS The Lamborghini Miura was produced by the Italian manufacturer between 1966 and 1973. The Miura, when it was presented on the market, was a real supercar characterized by high performance and innovative design. In 1970, on the layout of the Miura, a specific version dedicated for the competitions was created through improvements on chassis and suspensions. Other significant changes where implemented on engine power and on the braking system. The commercial name of this unique car with a power of 440 Hp and outstanding performances was "Jota". However, due to several requests from customers, Lamborghini modified some Miura SV series with specification similar to Jota. These cars were identified by the acronym SVJ and became soon the dream of car experts and funs all over the World. Detailed Plastic Kit of model Lamborghini Miura Jota SVJ in scale 1:24

Plus
Others 1:24 Lancia HF Integrale

Maquettes de véhicules 1/24

1:24 Lancia HF Integrale

510003658

€36.49

Article number: 510003658 Product: 1:24 Lancia HF Integrale Model Dim.: 16,0 cm COLOR INSTRUCTION SHEET The Lancia Delta HF four wheels-drive is considered an Icon of the Rally Competitions History. The Delta HF was produced in the second half of the 80s and participated in the World Rally Championship from 1987 to 1988 winning two world titles and achieving important results in a lot of competition as the Rallye de Monte-Carlo and the Rallye San Remo. The Lancia Delta Integrale was the evolution of the Delta HF. It was introduced in 1988 and dominated the World Rally Championship winning several constructors’ championship and an impressive number of competitions up to 1993. Updated in many aesthetic details that made it more muscular and aggressive, as the enlarged fenders and the new designed air intake on the engine bonnet, the Lancia HF Integrale was also improved in driving and engine performance. The 1995 cm3 turbocharged engine increased its power up to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and early 90s, bringing many famous pilots as Miki Biasion or Juha Kankkunen to victory. Detailed Plastic Kit of model Lancia HF Integrale in scale 1:24

Plus
Others 1:24 Lancia LC2

Maquettes de véhicules 1/24

1:24 Lancia LC2

510003641

€38.99

Article number: 510003641 Product: 1:24 Lancia LC2 Model Dim.: 20,0 cm SUPER DECALS SHEET - COLOR INSTRUCTIONS SHEET The LC2 was built by the Italian manufacturer Lancia to compete in the World Sport Prototype Championship at the beginning of ‘80s. Characterized by a clean and elegant design able to optimize the aerodynamic performance, the Lancia LC2 adopted a Ferrari V8 twin-turbocharged engine, prepared by Abarth, with a displacement of 2,599 Cm3 (later increased to 3,014 Cm3). The car made its debut in 1983 competitions where it was able to compete in terms of speed and performance to the Porsche cars, reference point in racing competition at those time. However the lower level of reliability affected the results. A lot of Italian drivers raced on the Lancia LC2 before to became famous in Formula 1 racing as Patrese, Alboreto and Nannini. Detailed Plastic Kit

Plus
Others 1:24 Lancia Stratos

Maquettes de véhicules 1/24

1:24 Lancia Stratos

510103654

€38.49

Article number: 510103654 Product: 1:24 Lancia Stratos Model Dim.: 18,6 cm The Lancia Stratos HF is, without any doubts, a reference icon of Italian automotive production during the ‘70s. The Italian sport car, produced for a short period of time, has become famous for ist innovative design, its technical solutions and, above all, for the success achieved in Rally competitions. Lancia Stratos won, for the 1974, 1975 and 1976 the World Rally Championship and a lot of Italian and European titles. In terms of mechanical lay out, it adopted the 6 cylinders V engine characterized by a displacement of 2,418 cc, and the rear-wheel drive transmission. Ist unique and nice design is, even today, an attractive dream for all fans of the automotive history. Detailed Plastic Kit of model Lancia Stratos in scale 1:24

Plus
Others 1:24 Land Rover Fire Truck

Maquettes de véhicules 1/24

1:24 Land Rover Fire Truck

510003660

€37.49

Article number: 510003660 Product: 1/24 Land Rover Fire Truck Length of the model 185 mm New Parts The "Land Rover" was certainly one of the most famous symbols of "Made in England" automobile production and is a real milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes realized on 1947. It has been characterized by the 4x4 traction system and by a robust and reliable design able to tackle the most difficult and challenging trails. The aluminum body provide lightness but, at the same time, more resistance against corrosions and more durable in time. In 1971, when the III Series was introduced, more than 1,000,000 of Land Rovers has been produced. Available in two versions: the "standard " one and the "long wheel base". Thanks to its extraordinary versatility was used in both military and civilian duties. Interesting the versions realized for the Fire Departments and made with the firefighting equipment. Detailed Plastic Kit

Plus
1:24 Mercedes 450 SLC Rally d Bandama'79

Maquettes de véhicules 1/24

1:24 Mercedes 450 SLC Rally d Bandama'79

510003632

€39.99

Article number: 510003632 Product: 1:24 Mercedes 450 SLC Rally d Bandama'79 Model Dim.: 19,8 cm Super Decals Sheet The Mercedes SLC is a luxury coupe produced by the German car manufacturer between 1971 and the early 1980’s. Its development was based upon the earlier launched Roadster model and was characterized by a harmonious and elegant design. The 450 SLC was equipped with a 4520 cm3 V8 engine capable of 225 HP. This high performance was successfully combined with refined styling and the ‘Premium’ quality furnishings selected for the vehicle interior that reinforced the SLC luxury branding in the marketplace. The vehicle was further adapted from the mainstream consumer model to the production of a sports version for car rallying competitions. The chassis was the same, but the rally version introduced a roll-bar, competition rims and aluminium parts and components to reduce the overall weight. All of these factors contributed to increased performance and rallying successes such as the Mintex Rally victory in 1978. Detailed Plastic Kit

Plus
Others 1:24 Mercedes Benz 300 SL Gull Wing

Maquettes de véhicules 1/24

1:24 Mercedes Benz 300 SL Gull Wing

510003645

€33.49

Article number: 510003645 Product: 1:24 Mercedes Benz 300 SL Gull Wing Length of the model 148 mm The Mercedes-Benz 300 SL was produced in 1954 by the German car manufacturer and it’s a masterpiece on four-wheels for design, elegance and luxury. The 300 SL, where the acronym stands for Sport Leicht, (Sport Light), adopted innovative solutions for the time. The Mercedes 2 door coupe had a tubular frame, a front 2.996 cc longitudinal engine connected to a 4-speed transmission and the rear drive. The maximum speed of 300 SL was 260 Km/h (162 mph). The real strength of the car, however, was in its innovative design and the adoption of the characteristic and eye-catching Gull-wing doors. Even today the Mercedes-Benz 300 SL is an icon of design and style of the period ant it is a real icon for collectors and fans. Detailed Plastic Kit

Plus
Others 1:24 Mercedes Benz 540K

Maquettes de véhicules 1/24

1:24 Mercedes Benz 540K

510003701

€27.49

Article number: 510003701 Product: 1/24 Mercedes Benz 540K The model Mercedes Benz 540K in 1/24 scale has a length of about 243 mm. One of the most beautiful automobiles of its time, the Mercedes Benz 540K was built from 1936-39. One unit is still shown in various parts of the world by Mercedes for promotion purposes. The car had a 8-cylinder 5.4 l engine and weighed no less than 2300 kg. Maximum speed was a stunning 170 km/h. Its fuel consumption was 28 to 30 liter for 100 km.

Plus
Others 1:24 Porsche 944 S Cabrio

Maquettes de véhicules 1/24

1:24 Porsche 944 S Cabrio

510003646

€33.49

Article number: 510003646 Product: 1:24 Porsche 944 S Cabrio Model Dim.: 17,5 cm COLOR INSTRUCTIONS SHEET The Porsche 944 was produced from 1982 to 1991 and was an evolution of the model 924 maintaining the aesthetic line. The car was originally equipped with a fuel injection engine from 2479 cc capable of delivering power of 163 hp. and made according to the Transaxle concept (rear engine and front shifter). The 944 was produced in different versions with different engines and extensive redesign of the interior in coupe and convertible configurations. In particular, the S variant, introduced in 1987, was equipped with a 16 valve engine generating 189hp and able to achieve speeds from 0 to 100 km / h in 7.2 seconds. 9800 were built. In 1989, Porsche introduced the 944 S Cabriolet, featuring a convertible body style, that obtained a good commercial success even in the U.S. market

Plus
Others 1:24 Porsche 956

Maquettes de véhicules 1/24

1:24 Porsche 956

510003648

€37.49

Article number: 510003648 Product: 1:24 Porsche 956 Length of the model 199 mm SUPER DECALS SHEET The Porsche 956 was built by the German manufacturer in 1982 to participate in the World Sport-Prototype Championship in the new Group C category. The "956" was a radical revolution compared to the previous Porsche 936 that won several competition between 1976 and 1981. Porsche to be comply with the new championship’s regulations introduced on the new "956" several technical innovations as the aerodynamic solutions and the aluminium monocoque chassis. The engine was the reliable 2,650 cm3 6 cylinders turbocharged engine able to release 635 Hp. Porsche 956 proven to be an effective and successful Sport car winning several Sport-Prototype Championships and four editions of the famous 24 Hours of Le Mans the World’s oldest sport car race in endurance racing. Detailed Plastic Kit

Plus
Others 1:24 Renault R5 Rally

Maquettes de véhicules 1/24

1:24 Renault R5 Rally

510103652

€36.49

Article number: 510103652 Product: 1:24 Renault R5 Rally Model Dim.: 16,7 cm For the 1977 Rally season the French company Renault developed a racing version of the popular small R5. In spite of the fact that this car was designed for very different scopes, after adequate preparation, the French technicians managed to obtain notable power from the engine: 150CV, and a noteworthy drive ration, which thanks to the contained weight of only 800 Kg. made the R5 a very manoeuvrable and fast car. The R5 obtained great results in the Sanremo and Montecarlo Rallies in 1978 and successively gratifying results in the Acropolis Rally and in Africa. Detailed Plastic Kit of model Renauls R5 Rally in scale 1:24

Plus
Others 1:24 Rolls Royce Phantom II

Maquettes de véhicules 1/24

1:24 Rolls Royce Phantom II

510003703

€28.99

Article number: 510003703 Product: 1/24 Rolls Royce Phantom II The model Rolls Royce Phantom II in 1/24 scale has a length of about 235 mm. The Rolls-Royce Phantom II was introduced in 1929. With this new model the tradition of the manufacturer was continued: To build beautiful and expensive cars. Each body was made to order of each customer. Our model belongs to the P-2 series, which was built in 1934. The original, from which this model, was copied, can still be found in the famous Stratford Motor Museum in England.

Plus
Others 1:24 Toyota BJ-44 LandCruiser So./Ha.Top

Maquettes de véhicules 1/24

1:24 Toyota BJ-44 LandCruiser So./Ha.Top

510003630

€36.99

Article number: 510003630 Product: 1:24 Toyota BJ-44 LandCruiser So./Ha.Top Since its launch in the early 1950s, the Toyota Land Cruiser has built a reputation for being a reliable and durable off-roader. Nevertheless, the classic has continued to develop in terms of design, equipment, engine and other technological features. One of the best-known and most popular models is the "J-40" series, which was produced from the 1960s to the 1980s. From 1977 the Land Cruiser was also known in Germany. The J-40 was available in three different wheelbases: short (BJ40), medium (BJ-44) and long (BJ45). Detailed Plastic Kit

Plus
Others 1:24 Volvo 760 GLE

Maquettes de véhicules 1/24

1:24 Volvo 760 GLE

510003623

€36.99

Article number: 510003623 Product: 1:48 Aermacchi MB 326 During the 1980s, Volvo’s 700 series was at the forefront of their auto production lines. First introduced in 1982, it was characterized by great attention to detail and a high level of finish, consistent with the "premium" positioning it strived for within both the European and US markets. The first model to be released was the Volvo 760. Available initially in a sedan configuration, it was noteworthy in design terms for its clean, square lines and a vertical rear window. The "powertrain" as it was known, was available with one of two 6-cylinder engines, the petrol injection with a V layout and a displacement of 2,849 cm3, and also a 6-cylinder in-line turbodiesel from 2,383 cm3. In 1985 the range expanded with the introduction of the station wagon version which was a notable commercial success in some European markets, in part due to its balance between comfort and versatility. The series engine range was also later expanded with the introduction of a new petrol-powered, turbocharged engine.

Plus
Others 1:24 Lamborghini Miura Model Set

Maquettes de véhicules 1/24

1:24 Lamborghini Miura Model Set

510172002

bientôtà nouveau disponible

Article number: 510172002 Product: 1:24 Lamborghini Miura Model Set Model Dim.: 18 cm STARTER KIT - MODEL SET SPECIAL EDITION SPRUE CUTTER AND VIDEO TUTORIAL INCLUDED Very few cars manage to change the automobile world like the Miura. With its posterior longitudinal engine V12 and fascinating body, designed by Marcello Gandini for Bertone, the two-seater redefined the concept of a sports car. At its debut the Miura was the fastest production car in the world: With a speed over 280 kph and an acceleration from 0-100 kph in 5,1 seconds the Lamborghini Miura set new standards in the sports car segment. The original Miura P400 was produced between 1966 and 1968, but the success story did not end there: The Miura was first developed further into the Miura S (1968-1971) with 370 HP and later into the Miura SV (1971-1973), which had wider mud guards and a greatly revamped 385 HP engine with separate lubricating systems for engine and gearbox. Deatailed plastic kit

Plus
1:24 Mercedes Benz 600S

Maquettes de véhicules 1/24

1:24 Mercedes Benz 600S

510003638

bientôtà nouveau disponible

Référence article: 510003638 Article: 1:24 Mercedes Benz 600S Taille du modèle 20,5 cm PIÈCES CHROMÉES - FICHE D'INSTRUCTIONS COULEUR La nouvelle Classe S comporte plus de 30 différentes innovations technologiques dont quelques systèmes «intelligents» rendant la conduite plus agéable et plus sûre. Le dispositif «CoMand» (Cockpit Management and Datasystem) visualise sue en écran logé dans la console centrale les informations relatives au véhicules et au trafic routier. Il affiche également toutes les informations provenant du système de navigation GPS. La Classe S est également dotée d’un équipement audio complet radio-cassette-CD, d’un téléphone et d’une télévision.   Attention ! Ne convient pas aux enfants de moins de 14 ans.

Plus
Others 1:24 Mercedes Benz G 230

Maquettes de véhicules 1/24

1:24 Mercedes Benz G 230

510003640

bientôtà nouveau disponible

Article number: 510003640 Product: 1:24 Mercedes Benz G 230 Length of the model 19,3 cm The Mercedes-Benz G-Class (G stands for Geländewagen, ie off-road) is a vehicle produced by the German company Mercedes-Benz since 1979 in different series. In some European countries it was marketed as Puch G. By 2017, over 300,000 were built. The history of the G-Class has its roots in 1972, when the leaders of the German company made an agreement with the Austrian Steyr-Daimler-Puch for the production of a modern and elegant off-road vehicle, but also robust and efficient, in short, suitable for any use. The production of the G-Class basically consists of three generations, all of which share the same mechanical architecture and the same basic structure, of the separate-chassis type with all-wheel drive, gearbox with reduced gears and rigid axle suspension (only in the third generation and limited the independent wheel solution was introduced to the front end only). In the first versions put on the market the gearbox was of the manual 4-speed type, although later on the transmission variants would have diversified to a considerable extent. The first generation was also produced under the Peugeot brand under the name of Peugeot P4: the other two series were produced more or less in the same period.

Plus
Others 1:24 Range Rover Classic

Maquettes de véhicules 1/24

1:24 Range Rover Classic

510003644

bientôtà nouveau disponible

Article number: 510003644 Product: 1:24 Range Rover Classic Model Dim.: 24,1 cm The Range Rover Classic can be considered a milestone in the history of off-road vehicles. It was produced in numerous variants and versions from 1970 to 1996. It was the first vehicle produced under the "Range Rover" brand and from 1981 it was available in the two- or four-door version. Thanks to its 4x4 traction and its sturdy structure, simple for construction but very reliable, the Range Rover was able to achieve very good off-road performances. The vehicle was able to obtain, very soon, good commercial success all over the World. The Range Rover, furthermore, was widely used by bodybuilders to create numerous special versions able to satisfy all types of needs. Continuously improved, during its career, in terms of engines, mechanical feature, interiors and details, it has always kept its role of "off-road" and "made in England" icon. Detailed Plastic Kit

Plus
Others 1:24 Range Rover Police

Maquettes de véhicules 1/24

1:24 Range Rover Police

510003661

bientôtà nouveau disponible

Article number: 510003661 Product: 1:24 Range Rover Police Model Dim.: 24,1 cm The Range Rover Classic can be considered a milestone in the history of off-road vehicles. It was produced in numerous variants and versions from 1970 to 1996. It was the first vehicle produced under the "Range Rover" brand and from 1981 it was available in the two- or four-door version. Thanks to its 4x4 traction and its sturdy structure, simple for construction but very reliable, the Range Rover was able to achieve very good off-road performances. The vehicle was able to obtain, very soon, good commercial success all over the World. The Range Rover, furthermore, was widely used by bodybuilders to create numerous special versions able to satisfy satisfy all types of needs. It has also been used by Police Departmets, Security Services and a lot of Public Services Fleet. Detailed Plastic Kit of model Range Rover Police in scale 1:24

Plus
48 de 48 Article